X1030004 UK
EE FR W IN TER 20 1 7 IAN RUSSELL CHRIS LOWE FELIX SCHOLLMEYER ELLIS BRAZIER JASON UMNEY KEVIN VANDEVENNE JAMIE SIMPSON
PRESENTATIONS, HINTS AND TIPS FROM OUR TOP ANGLERS
OUTLINE RIG GUIDE WEED LONG RANGE SOLID BAG STALKING BOILIE RIVER ZIG
FE ATU R E S NE W 2017 OU T LINE END TACKLE RAN G E
avidcarp.com
AvidCarp
avidcarppage
@avidcarpers
@avidcarp
All Avid products are covered by intellectual property rights. Trade Marks include: Avid Carp® i-Design UK® Reflo Power® Power Max® Direct Mono® Quick Stops® Captive® Dura Stop® Sight Stops® Corn Stops® Memory Foam Technology® Trap Line® Transit® HQ® Pin Down® Tuned® Specifications are correct as of November 2017. All specifications are approximate and may vary or be modified. © 2018 Preston Innovations Limited Preston Innovations Limited: Stafford Park 12, Telford, Shropshire, TF3 3BJ Preston Innovations: Positronweg 12, 3542 AZ Utrecht, Netherlands
2
2017 AVID RIG GUIDE
Welcome to the Avid Carp Outline Rig Guide. This guide features presentations from some of our top anglers, along with helpful hints and tips. Not only that, they will also explain where and when these rigs and setups can be most effective on the bank. This rig guide features our camouflage Outline End Tackle range, which will demonstrate how certain products work together to disappear on the lakebed.
CONTENTS OUTLINE RIG GUIDE
CONTENTS RIG SETUPS
6
8
10
12
Weed
Long Range
Solid Bag
Stalking
Ian Russell shares his famous Flick Rig, which has caught him more big fish than he can remember in the weed.
When it comes to fishing at range, there’s not many better at it than Chris Lowe.
Solid bag expert Felix Schollmeyer shows you how to create the perfect presentation.
Master of short session fishing Ellis Brazier shares his stalking setup.
14
16
18
Boilie
River
Zig
Jason Umney shares his great success with this simple but effective method.
Kevin Vandevennes’ setup offers unrivalled camouflage, fantastic abrasion resistance and 100% reliability.
Jamie Simpson explains one of the most underused methods in modern day carp fishing, which has seen some of his most memorable catches.
O U T L I N E E N D TA C K L E R A N G E
20
22
24
26
Lead Clip Choice
Leader Choice
Retro Leads
Outline End Tackle
There are a choice of three different Lead Clips in the Outline End Tackle range, each designed to suit a different situation.
From crystal clear waters to snaggy conditions, Avid have a Leader material for you.
Avids new leads, featuring the most popular shapes from yesteryear.
End Tackle that’s disguised on every lakebed, providing a camo finish that’s unique to every product.
2017 AVID RIG GUIDE
3
INTRODUCTION
4
2017 AVID RIG GUIDE
INTRODUCTION OUTLINE RIG GUIDE
Our Outline End Tackle range is the result of two years of rigorous product development and testing using the latest technology available, culminating, in our opinion, as the very best in end tackle concealment. The unique camo finish featured on the range has endured full underwater testing on a whole host of different lakebeds to create the very best colouring possible for rig concealment. With its semi-transparent pigment and camo fleck finish, the range seamlessly blends in to any underwater environment it is presented on. The need to carry a variety of different coloured end tackle is now a thing of the past. This innovative range contains all of the core items used in modern day carp fishing, making it a ‘must have’ inside your tackle box.
2017 AVID RIG GUIDE
5
WEED SETUP IAN RUSSELL
Fishing in the weed is something that lots of anglers try to avoid but Ian Russell has a rig and setup that he uses to great effect. Ian’s famous Flick Rig has caught him more big fish than he can remember and a good chunk of them have been in the weeds.
6
2017 AVID RIG GUIDE
WEED SETUP IAN RUSSELL
S T EP - B Y - ST E P
RIG SETUP
CHECKLIST
1. Cut off one turn of Captive Stiff Rig Filament
Size 6 LSK Hooks
2. Tie a knotless knot leaving a long hair
Hookbait Swivels
3. Slide a Hookbait Swivel onto the hair, and form a loop by passing it back through the eye of the hook
QC Lead Clips
4. Blob the tag end with a lighter 5. Tie a Ring Swivel to the opposite end
XL Anti Tangle Sleeves
1
2
3
4
5
6
7
8
9
10
11
12
of the Stiff Rig Filament. The rig length can vary depending on the situation
6. Ian likes to use a 15mm Sonubaits Pop Up for this rig. He attaches it to the Hookbait Swivel with bait floss
Ring Swivels Lead Clip Tail Rubbers
7. Blob the tag end with a lighter
20lb Captive Stiff Rig Filament 20lb Pin Down Hooklink
8. For best results, the hook point should sit parallel with the lakebed 9. Cut off 12 inches of Pin Down Hooklink for the soft boom section 10. Tie to the ring of the Ring Swivel 11. Tie a loop in the opposite end and slide on an XL Anti Tangle Sleeve
50lb Pin Down Leader Sonubaits Ian Russell’s Original Pop Ups Tuna & Sweetcorn
12. Attach the rig to a QC Lead Clip and slide the XL Anti Tangle Sleeve over
3oz Bottle Lead
#TO P TIP PVA MESH
Ian uses two Sonubaits Pop Ups in PVA mesh to hold the rig above the weed. When the PVA melts, the rig falls slowly and rests on top of the weed.
2017 AVID RIG GUIDE
7
LONG RANGE SETUP CHRIS LOWE
When it comes to fishing at range, there’s not many better at it than Chris Lowe. Chris likes to keep things simple, only using rigs and components that he can rely on. This setup not only ensures maximum distance, but also that the rig doesn’t tangle in flight and is well presented when on the lakebed.
8
2017 AVID RIG GUIDE
LONG RANGE SETUP CHRIS LOWE
S T EP - B Y - ST E P
RIG SETUP
CHECKLIST Size 6 CRV Hooks 2mm Shrink Tube Hookbait Swivels
1
2
3
4
5
6
7
8
9
10
11
12
Ringed Lead Clips Naked Tail Rubbers 20lb Outline Fluorocarbon 25lb Outline Fluorocarbon 15lb Captive Hooklink Sonubaits Ian Russell’s Original Pop Ups Peach & Black Pepper 4oz Distance Pear Lead
1. Cut 6 inches of 15lb Captive Braid for the supple part of the rig
2. Make a loop and slide on a Hookbait Swivel 3. Pass the loop over the point of the hook and position opposite the barb 4. Pass the two tag ends
through the eye of the hook
6. Cut a length of Shrink Tube and steam down over the knotless knot
10. Tie a loop in the opposite end of
7. Using an Albright knot, tie a 7 inch
11. Loop the rig onto a Ringed Lead Clip
length of 20lb Outline Fluorocarbon for the hook length and cover the knot with a small amount of putty
8. Using bait floss, attach a 12mm pop up to the Hookbait Swivel
the 20lb Outline Fluorocarbon
12. Chris uses a 4oz Distance Pear and Naked Tail Rubber, along with a 25lb Outline Fluorocarbon Leader
9. Blob down with a lighter
5. Tie a knotless knot with
the longest tag end and trim down the short tag end
# TOP TI P PVA LINK
When fishing at range try using a PVA Link to help take the shock of the cast off the rig.
2017 AVID RIG GUIDE
9
SOLID BAG SETUP FELIX SCHOLLMEYER
This underrated tactic can be devastating when used correctly. There is virtually nowhere that a solid PVA can’t be fished, even in thick weed. With a little practice and the correct components, solid PVA bags can be easy to tie and quick to setup. Solid bag expert Felix Schollmeyer shows us how to create the perfect presentation.
10
2017 AVID RIG GUIDE
SOLID BAG SETUP FELIX SCHOLLMEYER
S T EP - B Y - ST E P
RIG SETUP
CHECKLIST Size 8 WDG Hooks Line Aligners Medium Rig Drops
1
2
3
4
5
6
7
8
9
10
11
12
Boilie Screws Solid Bag Stems Line Droppers PVA Bag Loading Kit 20lb Pin Down Hooklink Sonubaits Code Red Hardened Dumbells Sonubaits 24/7 Pellets 2mm Sonubaits Clear Pellet Oil Krill 2oz Drop Off Inline Lead
1. Cut off 8 inches of Pin Down Hooklink 2. Tie a Boilie Screw to one end of the Pin Down 3. Tie a knotless knot with a short hair 4. Slide a Line Aligner over the knotless knot
5. Slide a Rig Drop onto the Pin Down to help keep the rig nailed down
6. Tie a loop at the opposite end of
the rig. The rig should be no longer than 4 inches
7. Loop the rig onto a Solid Bag Stem,
then put this through the Drop Off Inline Lead
8. Attach a Code Red Hardened Dumbell to the Boilie Screw 9. Use the Bag Loader Kit to tie up your solid bag, ensuring that the top of the Solid Bag Stem is above the fill line 10. Secure the top of the bag with PVA Tape and trim off the excess
11. Push in the corners of the solid bag
and stick down
12. Felix uses a 25lb Outline Leader to loop on the Solid Bag Stem
#TO P T IP LINE DROPPER
Felix uses a Line Dropper to keep the rig pinned to the bottom.
2017 AVID RIG GUIDE
11
S TA L K I N G SETUP ELLIS BRAZIER
Ellis Brazier is the master of short session fishing. One of his preferred ways to catch carp is by stalking them in the margins. His stalking setup uses an inline drop off lead system with the heaviest lead he can use. A 4oz lead combined with a short hooklink means that takes can savage and hook holds are superb. Ellis uses a small amount of particles to feed and uses a single grain of maize as a hookbait straight out of the particle mix. He believes that this can fool even the wariest of carp.
# TOP TI P HOOKBAIT
Ellis prefers to use hookbait that matches his feed, Sonubaits Cooked Hemp & Mixed Particles Spod Mix is his favourite. The maize can be picked out and used as hookbaits.
12
2017 AVID RIG GUIDE
STALKING SETUP ELLIS BRAZIER
S T EP - B Y - ST E P
RIG SETUP
CHECKLIST Size 6 CRV Hooks Mixed Groove Boilie Stops 1.6mm Shrink Tube
1
2
3
4
5
6
7
8
9
10
11
12
50lb Pin Down Leader 20lb Pin Down Hooklink Inline Tail Rubbers Anti Tangle Sleeves Medium Rig Drops QC Drop Off Stems Line Droppers 4oz Drop Off Inline Lead Sonubaits Cooked Hemp & Mixed Particles Spod Mix
1. Cut off around 10 inches of Pin Down hooklength
6. Slide on a Rig Drop to help keep the rig on the bottom
2. Tie a loop in one end and attach
7. Tie a loop in the opposite end of
your hookbait. Ellis uses a single piece of maize which matches his feed. Use a Boilie Stop to secure the maize
3. Tie a seven turn knotless knot 4. Cut a 15mm length of Shrink Tube and slide on to the hooklength
5. Ellis likes to steam the Shrink Tube
over the knotless knot and onto the shank of hook opposite the point. This helps to stop the hair from tangling
the rig
8. Loop a spliced Pin Down Leader
onto the ring of a QC Drop Off Stem, then slide an Inline Tail Rubber onto the Pin Down Leader
9. Insert the QC Drop Off Stem into a Drop Off Inline Lead. Ellis uses the biggest lead possible for this setup. A 4oz Drop Off Inline ensures a good hook hold on the take
10. Run the leader along the channel of the lead, and place the Inline Tail Rubber over the top of the stem
11. Attach the hooklength to QC
Drop Off Stem and cover with an Anti Tangle Sleeve
12. Ellis uses a Line Dropper to keep the whole rig out of the way of any wary carp
2017 AVID RIG GUIDE
13
BOILIE SETUP JASON UMNEY
Over the last few years, boilie fishing is a tactic that has been on the decline, with more and more anglers opting to fish over a tight bed of bait. Jason Umney on the other hand has stuck to fishing boilies only and continues to have great success with this simple but effective method.
14
2017 AVID RIG GUIDE
BOILIE SETUP JASON UMNEY
S T EP - B Y - ST E P
RIG SETUP
CHECKLIST Size 4 LSK Hooks Hookbait Swivels Hook Beads
1
2
3
4
5
6
7
8
9
10
11
12
35lb Captive Coated Hooklink XL Line Aligners Anti Tangle Sleeves QC Lead Clips Lead Clip Tail Rubbers Mixed Groove Boilie Stops 50lb Pin Down Leader Sonubaits Code Red Hardened Dumbells 3.5oz Bottle Lead
1. Cut 12 inches of Captive Coated Braid 2. Strip back 2 inches of the coating for the knotless knot
8. Tie a Boilie Stop to secure the bait using bait floss and blob with a lighter 9. Tie a loop in the opposite end
3. Tie a knotless knot and trim off the hair 10. Jason uses a 3oz Bottle Lead, along 4. Slide an XL Line Aligner over the eye
with a QC Lead Clip and Lead Clip Tail Rubber
5. Slide a Hookbait Swivel onto the
11. Attach the rig to the QC Lead Clip and cover with an Anti Tangle Sleeve
6. Secure the Hookbait Swivel with a Hook Bead opposite the barb
12. Jason uses a Pin Down Leader to attach the mainline, to keep the rig nailed to the bottom
of the hook
shank of the hook
7. Jason likes to use a Code Red
# TOP TI P
Hardened Dumbell for the hookbait
THREE BAIT STRINGER
Jason uses a three bait stringer tied around the shank of the hook, this ensures the hook point is protected when placing the rig.
2017 AVID RIG GUIDE
15
RIVER SETUP K E V I N VA N D E V E N N E
Kevin Vandevenne has been fishing for river carp for years. His setup is based around strong, reliable components and good rig concealment. Over the years, Kevin has fine-tuned his setup and his latest version offers unrivalled camouflage, fantastic abrasion resistance and 100% reliability.
16
2017 AVID RIG GUIDE
RIVER SET UP KEVIN VANDEVENNE
S T EP - B Y - ST E P
RIG SETUP
CHECKLIST Size 4 CRV Hooks Boilie Screws XL Line Aligners
1
2
3
4
5
6
7
8
9
10
11
12
35lb Captive Coated Hooklink Ringed Lead Clips Lead Clip Tail Rubbers 50lb Pin Down Leader 4oz Gripper Lead Sonubaits Particle Spod Mix Cooked Hemp & Tiger Nuts
1. Cut off 18 inches of 35lb Captive Coated Braid
5. The braid should come off the back of
10. Loop the rig onto a Ringed Lead Clip
2. Strip back 4 inches of coating at
6. Slide an XL Line Aligner over the
11. Kevin uses a Gripper Lead to help counteract the flow of the river and slides on a Lead Clip Tail Rubber
the bend of the hook inline with the barb
one end
knotless knot
3. Tie a Boilie Screw to the stripped
7. Mount a Tiger Nut on the Boilie Screw 12. The setup is finished with a Pin
back braid
4. Put the point of the hook
through the braid, leaving a small gap between the Boilie Screw and CRV Hook
8. Make sure the Tiger Nut is screwed all the way onto the Boilie Screw 9. Tie a loop in the opposite end of the Captive Braid leaving the coating on
Down Leader, this helps to keep the rig pinned down and offers great abrasion resistance
# TO P T IP TIGER NUTS
When bream are a problem try using Tiger Nuts as a hookbait. The Boilie Screws are perfect for Tiger Nuts too.
2017 AVID RIG GUIDE
17
ZIG SETUP JAMIE SIMPSON
The Zig Rig is by far one of the most underused methods in modern day carp fishing. Jamie Simpson on the other hand uses them to great effect all year round. Some of his most memorable catches have been on the Zigs.
18
2017 AVID RIG GUIDE
ZIG SETUP JAMIE SIMPSON
S T EP - B Y - ST E P
RIG SETUP
CHECKLIST 10lb Zig Line Size 10 CHD Hooks Zig Lites or High Lites for hookbait
1
2
3
4
5
6
7
8
9
10
11
12
Lead Clip Kit Line Aligners XL Anti Tangle Sleeves Transfer PVA Tape 4oz Distance Pear Lead 18lb Outline Fluorocarbon Leader
1. Cut off required length of Zig Line 2. Tie a small loop in one end to mount the bait
3. Mount the Zig Lite or High
Lite, then pull the Boilie Stop in to the loop to secure
4. Using a short hair will
ensure the bait sits close to the hook
6. Use a Line Aligner to help kick the line out at the correct angle
10. Push Anti Tangle Sleeve over the
7. Tie a loop in the opposite end and
11. Attach your lead of choice. Jamie
eye of the swivel
slide on an XL Anti Tangle Sleeve
uses a 3oz Distance Pear
8. Tie the swivel from the Lead Clip Kit
12. Jamie then ties PVA Tape around
to an 18lb Outline Fluorocarbon Leader, then slide on the Lead Clip
9. Loop the hooklink onto the eye of the swivel and pull swivel into the Lead Clip
the back of the Lead Clip where the Tail Rubber would usually fit. This ensures that the lead is ejected on the take
5. Tie a knotless knot
# TOP TI P SONUBAITS LAVA
Sonubaits Lava adds extra attraction to your hookbait and leaks off slowly over time.
2017 AVID RIG GUIDE
19
LEAD CLIP CHOICE OUTLINE RANGE
There are a choice of three different Lead Clips in the Outline End Tackle range, each designed to suit a different situation. Our unique patterned finish breaks up the shape of the Lead Clip when in the water, camouflaging it into the lakebed.
QC LEAD CLIP A0640003
The QC Lead Clip is the perfect choice when fishing in the weed. The metal work runs all the way through the centre in one continuous piece, which is extended down into the arm that holds the lead. With the metal work fixed into the Lead Clip in this way, it is impossible for it to pull out, making it a great choice when dropping the lead is essential. The QC fitting also makes the QC Lead Clip easy to quickly change your hooklink without having to break down the rig or tie a new knot.
20
2017 AVID RIG GUIDE
LEAD CLIP CHOICE OUTLINE RANGE
RINGED LEAD CLIP
LEAD CLIP KIT
Featuring the same fixed metal work as the QC Lead Clip, but finished with a flexi ring, the Ringed Lead Clip is super strong and virtually impossible to break when casting heavy leads.
With a more traditional design, this kit is supplied with a Tail Rubber and Swivel.
A0640002
The flexi ring allows for your rig to fold back when in flight, making the setup more streamlined for distance casting.
A0640001
It a great choice when fishing on open water or when dropping the lead is not necessary. This Lead Clip will also accept a Speed Link which makes a great semi-fixed running rig.
2017 AVID RIG GUIDE
21
LEADER CHOICE OUTLINE RANGE
When it comes to choosing the correct leader material, there are a few things that should be taken in to account. If the conditions are snaggy, then look no further than 50lb Pin Down Leader. If the water you’re fishing is crystal clear, then there is nothing better than the Outline Fluorocarbon Leader.
OUTLINE FLUOROCARBON LEADER
Offering unrivalled invisibility in water, this algae tinted two tone construction makes the line virtually impossible to see, even when not completely on the bottom of the lakebed. A very special leader material or hooklink, it marries up supreme sinking qualities with new levels of invisibility, great knot strength and abrasion resistance. The Outline Fluorocarbon is supplied on a 50m spool, in 18lb, 20lb, 25lb breaking strains.
22
2017 AVID RIG GUIDE
PIN DOWN LEADER Super supple, abrasion resistant Pin Down Leader sinks like nothing else on the market. Thanks to its unique Outline PTFE fibres it blends in to virtually any lakebed. With all the great qualities of a lead core leader, but without the stiff inner lead, which can sit off the bottom when lying over obstructions. This leader is easy to splice but also equally effective being tied. Supplied on a low profile 10m spool, that fits perfectly in your tackle box, alongside your hooklink materials.
LEADER CHOICE OUTLINE RANGE
S T EP - B Y - ST E P
PIN DOWN LEADER SETUP
CHECKLIST Pin Down Unleaded Leader Splicing Needle
1
2
3
4
5
6
7
8
9
1. Thread the Pin Down Leader onto a Splicing Needle
5. Bring the tag end all the way through
2. Bring the Splicing Needle out of the side of the Pin Down Leader and pull down onto the needle
6. Pull the tag end through until you have the desired loop size
3. Use the Splicing Needle to hook
the tag end of the Pin Down Leader creating a loop
4. Slowly push the Pin Down Leader off the needle bringing the tag end through the middle
and out of the first hole in the leader
7. Trim the tag end 8. Blob the tag end with a lighter 9. The finished leader should have a small loop and the tag end should be pulled back in to the middle of the leader
2017 AVID RIG GUIDE
23
RETRO LEADS OUTLINE RANGE
SIZES AVAILABLE All Avid retro leads are available from 1.5oz up to 4oz, in half ounce increments.
DISTANCE PEAR
DISTANCE BOTTLE
This retro shape is the ultimate streamlined lead for casting extreme distances.
This classic was widely used by big fish anglers across Europe in the 90’s and is considered as one of the best shapes ever produced.
The weight forward design makes it easy to cast long distances along with helping to increase stability when in flight.
24
2017 AVID RIG GUIDE
The Distance Bottle lead is the ideal shape for fishing a multitude of situations.
RETRO LEADS OUTLINE RANGE
The Retro Lead range features some of the most popular shapes from yesteryear. With a super tough and durable coating, this range will stand up to the most extreme fishing conditions, lasting much longer than some leads with a more modern paint finish. The retro lead range features a modern twist in the form of a new
swivel mounting system. The double barrel flexi ring swivel has been moulded directly into the top of the lead instead of being mounted on a conventional brass loop. This helps to increase the bolt effect of the lead whilst also decreasing line twist and tangles during casting. Matching the Outline End Tackle range, these leads are finished in our unique Outline Camo, which blends in perfectly into any lakebed.
DROP OFF IN-LINE
FLAT GRIPPER
The perfectly centred weight distribution makes this classic shape the ultimate choice for PVA bags. The lead features a subtle grove on one side for fishing drop off style. The rigid insert will accept a swivel or a QC Drop Off Stem.
A favoured classic by river anglers all across Europe.
This lead also features an Inline Tail Rubber.
The raised tooth design helps to grip the bottom in flowing water, ensuring that your lead arrangement and rigs remain exactly where you want them. This lead is the perfect design for fishing steep marginal shelves where it is imperative that your rigs remain in place.
2017 AVID RIG GUIDE
25
END TA C K L E
LEAD CLIP KIT A0640001
Includes a click-fit Lead Clip, matching Tail Rubber and size 8 swivel. Compatible with Avid Anti Tangle Sleeves.
OUTLINE RANGE End Tackle that’s disguised on every lakebed, providing a camo finish that is unique to every product. Designed to blend in perfectly, using a fast-sinking material.
INLINE TAIL RUBBERS A0640009
Designed for use with all Avid Inline leads. Can also be used with Avid Lead Clips for a slower-releasing setup or when fishing in colder conditions.
26
2017 AVID RIG GUIDE
END TACKLE OUTLINE RANGE
RINGED LEAD CLIPS
QC LEAD CLIPS
Designed to provide a hinged presentation for your rig. Simply tie your main line or leader to the rear and tie rigs onto the reinforced ring section at the front. Compatible with all Avid Tail Rubbers.
Quickly change rigs and setups with this double-ended QC Lead Clip system. Simply tie your main line or leader to the rear and hook rigs onto the QC section at the front. Compatible with all Avid Tail Rubbers and Anti Tangle Sleeves.
LEAD CLIP TAIL RUBBERS
NAKED TAIL RUBBERS
X-GRIP TAIL RUBBERS
Compatible with all Avid Lead Clips. Designed to provide streamlined end tackle, with super softness for maximum safety.
Compatible with all Avid Lead Clips. Designed to provide streamlined end tackle when fishing without a leader material. Boasts super softness for maximum safety.
Having trouble with big leads ejecting when they impact with water or ejecting on nuisance species? X-Grip Tail Rubbers ensure this doesn’t happen, but still allow the lead to eject in snaggy conditions. Compatible with Avid QC and Ringed Lead Clips.
A0640002
A0640004
A0640003
A0640005
A0640028
2017 AVID RIG GUIDE
27
ANTI TANGLE SLEEVES
XL ANTI TANGLE SLEEVES
QC DROP OFF STEMS
These shorter Anti Tangle sleeves kick your rig away from the lead perfectly. Compatible with Avid QC Lead Clips and QC Drop Off Stems.
These longer Anti Tangle sleeves kick your rig away from the lead perfectly. Compatible with Avid QC Lead Clips and QC Drop Off Stems.
Avid created the first ever Drop Off Stem for fishing with inline leads. We’ve improved it, however, with the addition of a QC link. Compatible with Avid Anti Tangle Sleeves and all Avid inline leads.
SOLID BAG STEMS
PVA LINKS
SPEED LINKS
Preformed so you can attach your main line directly to the top of the stem. Great for quickly changing between pre-tied Solid PVA Bag setups. A Ring Swivel completes the setup.
Attach the PVA Link to your lead and then slide a PVA bag into the specially formed groove. A great way to avoid tangles when PVA bag fishing.
Change rigs or leads quickly with a Speed Link. Compatible with our Chod and Heli Buffers, and can be used in conjunction with our Ringed Lead Clip system.
A0640006
A0640011
28
2017 AVID RIG GUIDE
A0640007
A0640012
A0640010
A0640025
END TACKLE OUTLINE RANGE
RING SWIVELS
LINE ALIGNERS
XL LINE ALIGNERS
Create safe rigs with extra movement with these high-performance size 8 Ring Swivels. An ideal option for Helicopter presentations.
Provides a neat and streamlined Line Aligner over hooks sizes 8-12.
Provides a neat and streamlined Line Aligner over hooks sizes 6-2.
HOOK BEADS
HOOKBAIT SWIVELS
BOILIE SCREWS
These small, but grippy Hook Beads are streamlined perfectly for modern rigs. They work effectively on hooks sized 10-4.
These Big Eye Hookbait Swivels marry the neatness of a Hook Swivel, with the convenience of a larger eye. Far less obtrusive than many other hookbait mounting swivels.
These camouflaged hard plastic Boilie Screws will grip almost any bait. Create the perfect quick change pop-up presentation.
A0640008
A0640019
A0640017
A0640021
A0640018
A0640020
2017 AVID RIG GUIDE
29
MEDIUM RIG DROPS
XL RIG DROPS
These streamlined Tungsten Rig Drops are perfect for use on your rigs, providing a modern alternative to rig putty. Preformed on thicker wires for ease of use with higher diameter materials like coated braid.
These streamlined Tungsten Rig Drops are perfect for use on your rigs, providing a modern alternative to rig putty. Preformed on thicker wires for ease of use with higher diameter materials like coated braid.
1.6MM SHRINK TUBE
2MM SHRINK TUBE
MIXED GROOVE BOILIE STOPS
A camouflaged Shrink Tubing material that enables any number of rig presentations. Use on hook sizes 8-4.
A camouflaged Shrink Tubing material that enables any number of rig presentations. Use on hook sizes 4-1.
A0640013
A0640022
30
2017 AVID RIG GUIDE
A0640023
A0640014
A0640024
A streamlined Boilie Stop formed with a taper to follow boilie hookbaits for maximum camouflage.
END TACKLE OUTLINE RANGE
LINE DROPPERS
XL LINE DROPPERS
Simply slot your line into the Line Dropper and twist until you are happy with the levels of grip. Great for fishing behind the lead in preference to a leader material, to pin down the last metre of your line.
Simply slot your line into the Line Dropper and twist until you are happy with the levels of grip. Great for fishing behind the lead in preference to a leader material, to pin down the last metre of your line.
A0640015
A0640016
PIN DOWN BRAIDED HOOKLINK 20LB
PIN DOWN UNLEADED LEADER 50LB
The most supple hooklink we’ve ever produced. Made using Outline camouflage PTFE fibres. Fast sinking and highly abrasion resistant.
The most supple leader material we’ve ever produced. Made using Outline camouflage PTFE fibres. Fast sinking and highly abrasion resistant.
A0560001
A0560002
2017 AVID RIG GUIDE
31
IanORIGINAL Russell’s
Chocolate Orange
Creamy Toffee
Indian Spice
Highly potent flavour combinations Two tone striking colours | Ultra buoyant Liquid booster included | Mixed 12mm & 15mm
Peach & Black Pepper
Pineapple & Cream
Raspberry Ripple
Tuna & Sweetcorn
RAISE THE BAR.