NEW PRODUCTS

Where the controller becomes a modular control cabinet

The MX-System is a uniform modular automation component that can be used to replace traditional control cabinets with modules in many applications. The system consists of a robust aluminium baseplate in protection class IP67 with integrated module slots that feature EtherCAT for communication and an integrated power supply (safety extra-low voltages as well as 400 V AC and 600 V DC). The largest expansion stage can even accommodate a connected load of 400 V AC/63 A. Corresponding modules are available for the mains connection and all other control cabinet functions. When it comes to connecting the field level, the modules use connection plugs that have been tried and tested for many years in the field of automation technology. A system combination of baseplate and modules has a protection class of IP67 and can be mounted directly on the machine. The system reduces the amount of effort involved for the manufacturer, especially during the planning and installation phases, while the integrated diagnostic functions reduce the complexity for the end user. This all combines to result in a modular control cabinet system with a high protection class that can be mounted on the machine without the need for additional protective housings.

Beckhoff Australia www.beckhoff.com (03) 9912 5430

ICP Australia introduces a new three-phase Smart Power Meter

ICP Australia has introduced ICP DAS’s PM-3133 Series, which is inclusive of 3-phase smart power meter. The PM-3133 series gives you access to real-time electric usage for three-phase power measurement.

With its high accuracy (<0.5 per cent, PF=1 ), the PM-3133 series can be applied to both low voltage primary side and/ or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipment in real time under operation.

Furthermore, these compact size and cost-effective power meters are equipped with wired clip-on CT (various types, support input current up to 400 A). The PM-3133 Series operates over an input voltages range 10 ~ 500 VAC that allows worldwide compatibility, and with two channels relay outputs, it can be linked with sirens or lightings for alarm messages.

The series also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration. Features include:

• Bi-directional energy. • True RMS power measurements. • Energy analysis for 3P4W, 3P3W, 1P3W, 1P2W. • Current measurements up to 100 A with different CT ratio. • Voltage measurements up to 500 V. • Clip-on CT for easy installation. • W accuracy better than 0.5 per cent (PF=1). • Total Harmonic Distortion (THD). • Supports Modbus RTU protocol. • Supports 2 power relay output (Form A). • IEC 61010-1 and EN 61010-1. • Multiple data format.

ICP Electronic Australia www.icp-australia.com.au (02) 9457 6011

VariBlast compact safety gun for hard-to-reach places

PSENrope provides extra safety when emergency stop functions are deployed

This air gun has enough power to produce variable force with the simple adjustment of the trigger valve.

You decide how much force is needed for the application by squeezing the trigger a little or all the way for maximum force! This cast aluminium gun can be equipped with any of our 1/8 NPT engineered air nozzles. The VariBlast Compact Safety Air Gun is small, comfortable, and powerful while remaining light and ergonomic.

Applications include part cleaning, chip removal, liquid blowoff, part cooling, and part drying.

Features:

• lightweight; • comfortable to operate during extended use; • cariable flow trigger; • highly focused blast of air; • small nozzle and extension can fit into tight spaces; • reduced compressed air cost; • improved blowoff performance; • improved safety; • meets OSHA noise level requirements; and • meets OSHA pressure requirements.

Compressed Air Australia (08) 8983 3999 www.caasafety.com.au

Whether on the assembly line or machine: where safety in the production area is concerned, the safe rope pull switches PSENrope are a proven, reliable solution. PSENrope switch off functional processes by manual operation. PSENrope provide maximum safety when it matters: the emergency stop function can be triggered at any point along the rope. With a rope length of up to 75 metres, they are suitable for safeguarding large plants. The safe rope pull switches PSENrope are robust and flexible, making them a proven, reliable solution where safety in the production area is concerned. As the operating range of rope pull switches is limited only by the length of the rope, even large plants can be safeguarded using PSENrope. The PSENrope is suited for use in the packaging sector by laying down essential safety requirements, particularly with automation and primary packaging. Benefits:

• Simple installation and convenient management. • Flexible to use even when protecting large systems. • Extremely rugged thanks to robust finish and strong metal or plastic housing. • Highly robust due to sturdy metal or plastic housing. • Suitable for both indoor and outdoor use. • High level of safety as wiring space is physically separate from mechanics. • Cost-effective thanks to the combination of emergency stop and pull-to-release.

Pilz Australia www.pilz.com (03) 9560 0621