Princess Auto Catalogue #249 - Fall & Winter 2004 by Princess Auto

SHUR-LIFT HYDRAULIC CYLINDERS SPECIFICATIONS CONFORM TO ISO 9001 SPECIFICATIONS • High quality components ensure trouble free operation and extended cylinder life • High tolerance machining ensures reliable high pressure performance • Pressure tested for weld and seal integrity • Can be used for single or double acting applications • Designed for agricultural, industrial, construction and mobile applications • Manufactured by our own experienced factory team and backed by our Royal Service Promise

PISTON DETAIL 2,500

SHUR-LIFT 4,000 ®

6B 2

PISTON DETAIL 3,000

9 1 7

Y D R A U L I C S

PISTON DETAIL 4,000 3B

HEAD DETAIL 2,500

4 HEAD DETAIL 3,000

4 HEAD DETAIL 4,000

Component Features

0 00 4, T RS IF E -L IND 00 UR YL 3,0 SH C FT RS ES LI DE RI R- IN 00 SE HU CYL 2,5 S S S T R IF E E RI R-L IND SE HU YL S SC E RI SE

1. Shaft

100 Hr. salt spray tested, chrome plated, 100,000 PSI yield, C-1045 steel

1. Shaft

300 Hr. salt spray tested, chrome plated, 100,000 PSI yield, C-1045 steel

2. Shaft Wear Ring

Composite shaft wear ring extends shaft seal life and increases side load capacity

3. Shaft Seal

Patented Hallite Hythane 605 series shaft seal for improved sealing, seal stability and lower friction

3B. Shaft Seal

70 Durometer Nitrile "O" Ring provides excellent sealing at lower pressures

4. Shaft Wiper Seal

Patented Hallite 520/521 series shaft wiper seal with an outside lip for an effective housing seal and a low friction scraping lip for shaft cleaning

5A.Unitized Piston

A 33% glass-filled nylon wear ring is molded to the ductile iron piston resulting in no metal to metal contact, extending seal life and increasing side load capacity

5B. Standard Piston

Machined from ductile iron with a malleable piston surface for extended seal life

6A.PTFE Piston Seal

15% glass-filled teflon composite with excellent high pressure sealing and anti-wear characteristics

6B. Polyurethane 90 Durometer Polyurethane "O" Ring provides excellent tear and abrasion Piston Seal resistance reducing "O" Ring extrusion and nibbling 6C. Nitrile Piston Seal

70 Durometer Nitrile "O" Ring provides excellent sealing at lower pressures

7. Cylinder Tube

Honed DOM ST 52.3 tubing with better ductility and a higher charpy impact than commonly used C-1026 tube material

8A.Cylinder Head

Threaded Head with customized buttress designed threads for high pressures and shock loads

8B. Cylinder Head

Snap Ring Head offers reliable mid-pressure performance

9. Piston Locknut

Patented Unitorq design to withstand severe shock load and vibration

H Y D R A U L I C S

SHUR-LIFT 4,000 THREADED HEAD UTILITY CYLINDERS Features ®

Benefits

300 hr. salt spray tested shafting Excellent corrosion resistance Extends the shaft seal life and Shaft wear ring increases the side load capacity A nylon wear ring is moulded to the piston preventing metal to metal Unitized piston contact with the cylinder tube and increasing the side load capacity

• 4,000 PSI max. continuous pressure • Features cross tube mounting ends 1-1/2" bore, #6 ORB ports 3/4" dia. pinholes Base pineye width: 2" Rod pineye width: 2" 7,068 lbs. push @ 4,000 PSI 2" bore, #6 ORB ports 1" dia. pinholes Base pineye width: 2-3/4" Rod pineye width: 2-1/4" 12,566 lbs. push @ 4,000 PSI 2-1/2" bore, #6 ORB ports 1" dia. pinholes Base pineye width: 3-1/4" Rod pineye width: 2-1/4" 19,635 lbs. push @ 4,000 PSI 3" bore, #8 ORB ports 1" dia. pinholes Base pineye width: 3-3/4" Rod pineye width: 2-1/4" 28,274 lbs. push @ 4,000 PSI

Stroke Retracted Rod length dia.

Wt. (lbs.)

ITEM

PRICE

4" 8" 12" 18"

12" 16" 20" 26"

1" 1" 1" 1"

6.3 9.0 10.4 18.6

8009040 8009059 8009068 8009031

159.99 179.99 199.99 219.99

4" 8" 12" 24"

12" 16" 20" 32"

1-1/4" 1-1/4" 1-1/4" 1-1/4"

8.0 11.0 15.9 24.5

8009102 8009120 8009148 8009166

179.99 199.99 219.99 259.99

8" 12" 24"

16" 20" 32"

1-1/4" 1-1/4" 1-1/2"

15.9 19.2 32.8

8009175 209.99 8009184 229.99 8009139 279.99

8" 12" 24"

16" 20" 32"

1-1/4" 1-1/4" 1-3/4"

19.5 22.9 42.2

8009193 229.99 8009200 249.99 8009219 319.99

SHUR-LIFT 3,000 THREADED HEAD UTILITY CYLINDERS

• 3,000 PSI max. continuous pressure • Features cross tube mounting ends

Stroke Retracted Rod Wt. ITEM length dia. (lbs.) 4" 12" 1" 7.0 1200239 6" 14" 1" 7.1 1200240 8" 16" 1" 8.1 1200241 1-1/2" bore, #6 ORB ports 10" 18" 1" 9.1 1200242 3/4" dia. pinholes 12" 20" 1" 11.0 1200243 Base pineye width: 2" 14" 22" 1" 11.1 1200244 Rod pineye width: 2" 16" 24" 1" 12.2 1200246 5,301 lbs. push @ 3,000 PSI 18" 26" 1" 13.2 8008498 20" 28" 1" 15.0 8008746 24" 32" 1" 17.0 8008773 4" 12" 1-1/4" 9.8 8008808 6" 14" 1-1/4" 10.0 8008844 8" 16" 1-1/4" 12.7 1204304 10" 18" 1-1/4" 14.2 1200131 12" 20" 1-1/4" 15.6 1204312 2" bore, #6 ORB ports 14" 22" 1-1/4" 17.1 1204320 1" dia. pinholes 16" 24" 1-1/4" 18.5 1204437 Base pineye width: 2-3/4" 18" 26" 1-1/4" 20.0 1204338 Rod pineye width: 2-1/4" 20" 28" 1-1/4" 21.4 1204346 9,424 lbs. push @ 3,000 PSI 1-1/4" 24.4 1204353 32" 24" 30" 38" 1-1/4" 28.7 1204361 32" 40" 1-1/4" 30.0 1200220 36" 44" 1-1/4" 32.8 1200221 40" 48" 1-1/4" 35.8 1200222 48" 56" 1-1/4" 38.0 1204452 NOTE: Retracted length is measured centre of pinhole to centre of pinhole.

PRICE 129.99 139.99 149.99 159.99 169.99 179.99 189.99 194.99 199.99 209.99 139.99 149.99 159.99 169.99 179.99 189.99 199.99 209.99 219.99 229.99 239.99 249.99 259.99 279.99 309.99

SHUR-LIFT 3,000 THREADED HEAD UTILITY CYLINDERS

2-1/2" bore, #6 ORB ports 1" dia. pinholes Base pineye width: 3-1/4" Rod pineye width: 2-1/4" 14,726 lbs. push @ 3,000 PSI

3" bore, #8 ORB ports 1" dia. pinholes Base pineye width: 3-3/4" Rod pineye width: 2-1/4" 21,205 lbs. push @ 3,000 PSI

3-1/2" bore, #8 ORB ports 1" dia. pinholes Base pineye width: 4-1/4" Rod pineye width: 2-1/4" 28,863 lbs. push @ 3,000 PSI

4" bore, #8 ORB ports 1-1/4" dia. pinholes Base pineye width: 4-3/4" Rod pineye width: 2-3/4" 37,699 lbs. push @ 3,000 PSI

5" bore, #8 ORB ports 1-1/4" dia. pinholes Base pineye width: 5-3/4" Rod pineye width: 2-3/4" 58,904 lbs. push @ 3,000 PSI

Stroke Retracted Length 6" 14" 8" 16" 18" 10" 12" 20" 14" 22" 16" 24" 18" 26" 20" 28" 24" 32" 30" 38" 32" 40" 36" 44" 40" 48" 48" 56" 8" 16" 10" 18" 12" 20" 14" 22" 16" 24" 18" 26" 20" 28" 24" 32" 30" 38" 32" 40" 36" 44" 40" 48" 48" 56" 16" 24" 18" 26" 20" 28" 24" 32" 36" 44" 48" 56" 8" 17" 10" 19" 12" 21" 14" 23" 18" 27" 20" 29" 24" 33" 30" 39" 32" 41" 36" 45" 40" 49" 48" 57" 24" 48"

33" 57"

Rod dia. 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 2" 2" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 2" 2" 2-1/4" 2-1/4" 2-1/4"

Wt. (lbs.) 13.9 15.6 17.2 18.7 20.4 21.8 23.0 25.0 28.4 38.1 39.0 43.8 47.7 55.3 18.8 20.5 22.4 24.1 26.0 27.8 32.9 37.0 43.3 48.4 54.5 61.4 77.0 36.1 38.7 41.4 46.5 66.0 88.3 32.0 38.6 43.9 47.3 53.8 54.0 60.0 80.0 84.0 99.0 108.0 120.0

ITEM

PRICE

8008853 1204379 1200223 1200132 1200224 1200133 1200225 1204387 1204395 1200196 1200226 1200227 1200228 1200230 1204403 1204429 1200134 1200210 1204510 1204536 1200135 1204593 1200136 1204734 1204742 1204759 1200212 1200205 1200206 1200207 1200213 1200208 1200209 1200137 1200231 1200232 1200139 1204619 1200233 1204635 1200140 1200234 1200235 1200236 1200142

159.99 169.99 179.99 199.99 219.99 229.99 239.99 249.99 259.99 279.99 289.99 309.99 329.99 359.99 179.99 189.99 209.99 229.99 239.99 249.99 259.99 279.99 309.99 319.99 349.99 379.99 409.99 259.99 269.99 279.99 299.99 379.99 429.99 229.99 249.99 269.99 289.99 319.99 349.99 379.99 409.99 439.99 489.99 509.99 539.99

2" 2-1/2"

85.2 159.0

1200238 1204700

459.99 749.99

Rod dia.

Wt. (lbs.)

ITEM

5/8" 5/8" 5/8"

2.9 3.4 4.0

Y D R A U L I C S

SHUR-LIFT 2,500 SNAP RING UTILITY CYLINDERS

• 2,500 PSI max. continuous pressure • Features cross tube mounting ends 1" bore, 1/2" dia. pinholes 1/8" NPT ports Base pineye width: 1-1/2" Rod pineye width: 1-1/2" 1,962 lbs. push @ 2,500 PSI

Stroke Retracted length 4" 6" 8"

12" 14" 16"

PRICE

1200066 119.99 1200067 124.99 1200068 129.99

H Y D R A U L I C S

SHUR-LIFT 3,000 THREADED HEAD IMPLEMENT CYLINDERS • 3,000 PSI max. continuous pressure • Features clevis mounting ends

Stroke 4" 6" 8" 10" 12" 14" 16" 8" 10" 12" 14" 16" 18" 20" 24" 8" 10" 12" 14" 16" 18" 20" 24" 8" 10" 12" 14" 16" 18" 20" 24" 8" 10" 12" 14" 16" 18" 20" 24" 8" 10" 12" 14" 16" 18" 20" 24"

1-1/2" bore #6 ORB ports 1/2" dia. pinholes

2" bore #6 ORB ports 1" dia. pinholes

2-1/2" bore #6 ORB ports 1" dia. pinholes

3" bore #8 ORB ports 1" dia. pinholes

3-1/2" bore #8 ORB ports 1" dia. pinholes

4" bore #8 ORB ports 1" dia. pinholes

SHUR-LIFT 2,500 SNAP RING IMPLEMENT CYLINDERS 2,500 PSI max. continuous pressure.

• 1" bore, 1/2" pinholes • 1/8" NPT ports, 5/8" rod dia. • Features clevis mounting ends

Stroke 4" 6"

Retracted Length 14-1/4" 16-1/4" 18-1/4" 20-1/4" 22-1/4" 24-1/4" 26-1/4" 20-1/4" 20-1/4" 22-1/4" 24-1/4" 26-1/4" 28-1/4" 30-1/4" 34-1/4" 20-1/4" 20-1/4" 22-1/4" 24-1/4" 26-1/4" 28-1/4" 30-1/4" 34-1/4" 20-1/4" 20-1/4" 22-1/4" 24-1/4" 26-1/4" 28-1/4" 30-1/4" 34-1/4" 20-1/4" 20-1/4" 22-1/4" 24-1/4" 26-1/4" 28-1/4" 30-1/4" 34-1/4" 20-1/4" 20-1/4" 22-1/4" 24-1/4" 26-1/4" 28-1/4" 30-1/4" 34-1/4"

Retracted Length 14-1/4" 16-1/4"

Rod dia. 1" 1" 1" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4"

Rod dia. 1" 1"

Wt. (lbs.) 5.7 6.7 7.7 8.8 9.8 10.8 11.8 15.6 16.4 17.9 19.3 20.8 22.2 23.6 30.0 18.0 19.8 21.3 23.0 24.5 26.2 28.5 31.1 21.8 22.9 24.8 26.5 28.3 30.1 34.8 39.1 27.9 29.0 31.6 33.9 39.0 41.6 44.3 49.5 36.9 39.0 43.5 47.9 51.3 55.4 59.4 63.8

Wt. (lbs.) 3.2 3.8

ITEM

PRICE

1200255 1200256 1200257 1200258 1200259 1200261 1200262 1200263 1200264 1200265 1200266 1200267 1200268 1200269 1200270 1200271 1200272 1200273 1200274 1200275 1200276 1200277 1200279 1200280 1200281 1200282 1200283 1200284 1200285 1200287 1200288 1200289 1200290 1200291 1200292 1200293 1200295 1200296 1200297 1200298 1200299 1200300 1200301 1200303 1200304 1200305 1200306

139.99 149.99 159.99 169.99 179.99 189.99 199.99 169.99 179.99 189.99 199.99 209.99 219.99 229.99 239.99 179.99 189.99 209.99 229.99 239.99 249.99 259.99 269.99 189.99 199.99 219.99 239.99 249.99 259.99 269.99 289.99 209.99 219.99 239.99 259.99 269.99 279.99 289.99 309.99 249.99 249.99 259.99 289.99 299.99 319.99 349.99 379.99

ITEM

PRICE

1200071 1200072

119.99 124.99

TIE ROD HYDRAULIC CYLINDERS 2,500 PSI max. continuous pressure. Stroke 6" 8" 12" 24" 6" 8" 12" 24" 8" 12" 24"

Retracted length 18-1/4" 20-1/4" 22-1/4" 34-1/4" 18-1/4" 20-1/4" 22-1/4" 34-1/4" 20-1/4" 22-1/4" 34-1/4"

3-1/2" bore 1/2" NPT ports 1" dia. pinholes

4" bore 1/2" NPT ports 1" dia. pinholes

2" bore 3/8" NPT ports 1" dia. pinholes 2-1/2" bore 3/8" NPT ports 1" dia. pinholes 3" bore 1/2" NPT ports 1" dia. pinholes

Rod Wt. dia. (lbs.) 1-1/8" 16.5 1-1/8" 18.4 1-1/8" 20.5 1-1/8" 38.7 1-1/8" 17.5 1-1/8" 20.2 1-1/8" 23.0 1-1/8" 38.5 1-1/4" 26.3 1-1/4" 30.3 1-1/4" 43.3

ITEM

PRICE

8004980 1210003 8004380 8004981 8004983 1210005 8004382 8004383 1210006 8004984 1210010

84.99 89.99 104.99 134.99 89.99 94.99 114.99 144.99 99.99 124.99 154.99

20-1/4"

1-1/4"

32.3

1210002

104.99

20-1/4"

1-1/4"

39.7

1210007

114.99

THREADED HEAD UTILITY CYLINDER

CLEVIS END 1" pinhole, 1-1/8" between clevis ends. FITS 1-1/4" SHAFT 1252451 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2399 FITS 1-1/2" SHAFT 99 8003212 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 29

1/2" 3/4" 1" 1" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4"

Usable length 2-3/4" 3-1/4" 2-3/4" 3-3/4" 4-1/4" 4-3/4" 5-1/4" 5-3/4" 4-1/4" 6-1/4" 7-1/4"

• Specially priced due to OEM overrun • Max. continuous pressure: 3,000 PSI • Primed and ready to paint

CYLINDER PINS Includes cotter and presto pin. Dia.

Y D R A U L I C S

O’all Wt. ITEM PRICE length (lbs.) 3-1/2" 0.2 3800449 1.49 4" 0.5 3800450 1.99 3-1/2" 0.8 3800487 2.99 4-1/2" 1.0 3800451 3.49 5" 1.1 3800452 3.79 5-1/2" 1.2 3800453 4.19 6" 1.3 3800454 4.49 6-1/2" 1.5 3800456 5.49 5" 1.8 3800443 5.49 7" 2.4 3800445 7.49 8" 2.8 3800446 7.99

• Bore: 2", stroke: 19-1/4" • Retracted length: 29-1/4" • Ports: #6 ORB • Rod dia.: 1-1/4" • Pinholes dia.: 1" • Base pineye width: 2" • Rod pineye width: 2" • 9,424 lbs. push @ 3,000 PSI 8000937 – Wt. 21.9 . . . . . . . . . . . . . . . . . . . . . . . .

15999

CYLINDER BREATHERS

HYDRAULIC CYLINDER REPLACEMENT SEAL KITS • Contain all the seals within each cylinder • Fits all shaft sizes SHUR-LIFT 3,000 & 4,000 KITS

SHUR-LIFT 2,500 KITS

Bore Wt. (lbs) 1-1/2" 0.1 2" 0.1 2-1/2" 0.1 3" 0.2 3-1/2" 0.1 4" 0.2 5" 0.3

Bore Wt. (lbs) 1" 0.1 1-1/2" 0.1 2" 0.1 2-1/2" 0.1 3" 0.2 3-1/2" 0.2 4" 0.3

ITEM

PRICE

8018423 8018441 8018450 8018478 1250105 1255058 1255066

12.99 15.99 19.99 29.99 31.99 32.99 39.99

ITEM PRICE 1250023 1251123 1251131 1250058 1250060 1250061 1250062

8.99 10.99 12.99 17.99 22.99 23.99 26.99

• Applications include gear boxes, oil tanks and hydraulic cylinders • 7/8" hex head • Just a drop of oil on the screen after installation will keep dust and dirt from entering your system Wt. 0.1 lbs. 1291665 – 1291699 – 1290343 – 1290344 –

3/8" NPT 1/2" NPT #6 ORB #8 ORB . . . . . . . . . . . . . .

799/ea.

H Y D R A U L I C S

SHUR-LIFT 3,000 THREADED HEAD PLAIN END CYLINDERS

• These cylinders are without ends to enable you to adapt them for use in special applications when other mounts are needed. Choose one of our ends or use your own. • 3,000 PSI max. continuous pressure

Stroke Retracted Rod Wt. ITEM PRICE Length* dia. (lbs.) 2" bore, #6 ORB ports 8" 14-1/2" 1-1/4" 11.4 1200143 149.99 Outside tube dia. 2-3/8" 12" 18-1/2" 1-1/4" 14.4 1200144 159.99 * Retracted length is measured from the end of the shaft to the base of the cylinder tube. Cylinder breathers available on pg. 5.

CYLINDER ENDS A) CROSS TUBE

Drilled for 3/16" drive-in grease nipple. Dimensions Wt. (lbs.) ITEM PRICE 1" I.D. x 2-1/4" L 0.6 8001456 7.49 1" I.D. x 2-3/4" L 0.7 8001457 7.99 1" I.D. x 3-1/4" L 0.9 8001458 8.49 1" I.D. x 3-3/4" L 1.0 8001460 8.99 1" I.D. x 4-1/4" L 1.2 8001461 9.49 1-1/4" I.D. * x 2-3/4" L 1.5 8001469 12.99 1-1/4" I.D. * x 4-3/4" L 2.5 8001471 14.99 1-1/4" I.D. * x 5-3/4" L 3.1 8001472 16.99 * Heavy wall

B) MALE TANG

Use two to make a base end clevis. Dimensions Wt. (lbs.) ITEM PRICE 1" I.D. x 3/8" thick 0.4 8001473 8.49 1" I.D. x 1/2" thick 0.7 8001474 8.99 1" I.D. x 3/4" thick 1.0 8001475 9.99 1" I.D. x 1" thick 1.4 8001476 10.99

SHUR-LIFT 3,000 THREADED HEAD FEED TUBE CYLINDERS

• Cylinders feature a feed tube running from the shaft end to a base end mounted port • Features cross tube mounting ends • 3,000 PSI max. continuous pressure

Stroke Retracted Rod Wt. ITEM PRICE length dia. (lbs.)

2-1/2" bore, #6 ORB ports 1" dia. pinholes Base pineye width: 3-1/4" Rod pineye width: 2-1/4" 14,726 lbs. push @ 3,000 PSI 3" bore, #8 ORB ports 1" dia. pinholes Base pineye width: 3-3/4" Rod pineye width: 2-1/4" 21,205 lbs. push @ 3,000 PSI 5" bore, #8 ORB ports 1-1/4" dia. pinholes Base pineye width: 5-3/4" Rod pineye width: 2-3/4" 58,904 lbs. push @ 3,000 PSI

24"

32"

1-1/2" 33.0 8011732 279.99

24"

32"

1-3/4" 38.0 8011741 289.99

24"

33"

2-1/2" 87.0 8011812 549.99

H CUSTOM BUILD CYLINDER PROGRAM To place an order, contact: • The factory directly at 1-204-667-4630 ext. 368 or fax at 1-204-668-4530 • or National Call Centre at 1-800-665-8685 • or your nearest Princess Auto store

DELIVERY IN 10 WORKING DAYS FOR A MAXIMUM ORDER OF 5 PIECES Please fill out all blanks and dimensions applicable, hole sizes and location, thread size, etc. Use any combination of rod ends and base end mounts. Price and delivery date will be provided upon request.

Y D R A U L I C S

H Y D R A U L I C S

LOGSPLITTER CYLINDERS

• Threaded head design • 24" stroke, 2" shaft • #8 O-Ring Boss ports • Clevis mount with 1" pinhole in base end • Shaft end has been cut down to 1-1/2" with a 3/8" drilled pinhole • 3,000 PSI max. continuous pressure • Can be used as replacements on Princess Auto logsplitters or to build your own

Bore Force (ton) @ 3,000 PSI 3" 10-1/2 3-1/2" 14-1/2 4" 19

Wt. ITEM (lbs.) 38.0 1200247 44.0 1200248 66.4 1200249

PRICE 289.99 309.99 399.99

HYDRAULIC HOIST CYLINDERS • Threaded head design • 14" stroke, 2" shaft • 21-1/2" retracted length • #8 O-Ring Boss ports • 1-1/4" dia. shaft end with 1/2" pinhole • Base pineye width: 7-1/4", pinhole: 1-1/4" I.D. • 3,000 PSI max. continuous pressure • For single lever assembly 4" BORE – 7 ton capacity. 1200078 – Wt. 47.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 5" BORE – 12 ton capacity. 1200079 – Wt. 58.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

Y D R A U L I C S

29999 33999 HYDRAULIC PRESS CYLINDER

HYDRAULIC POWER PACK CYLINDER

Check out our shop presses on pages 173-174

• 6" bore, 10" stroke • 2" shaft • #8 0RB ports • Base pineye width: 6-5/8", pinhole dia.: 1-1/4" • Max. continuous pressure: 3,600 PSI • Use to build a 50 ton press 99 1200083 – Wt. 80.3 lbs. . . . . . . . . . . . . . . . . .

409

Designed to be used with shop presses as well as for a variety of lifting, spreading, bending, straightening, pushing, pulling, or clamping operations. • 50 ton capacity • 6" bore, 5-1/2" stroke • 2" shaft • 11-3/4" retracted height • 3/8" NPT ports • Base plate measures: 7" x 9-1/2" • Ram speed @ 1.6 GPM: 25.4 seconds extending, 22.4 seconds retracting • 3,500 PSI max. continuous pressure 99 1200060 – Wt. 61.8 lbs. . . . . . . . . . . . . . . . . . .

379

REPLACEMENT END CAP 1251370 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . Replacement seal kits available by special order.

14.99

REPLACEMENT END CAP 1252444 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . .

19.99

REPLACEMENT END CAPS FOR HYDRAULIC PRESSES Replaces worn end cap or can be welded to customers’ own dies. Fits 30 ton press #3460052 on page 174. 1250029 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . 24.99 Fits 50 ton press #3460068 on page 173. 1251388 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . 19.99

PNEUMATIC PRODUCTS

Y D R A U L I C S

END MOUNT AIR CYLINDERS • Features an aluminum cylinder body and chromed steel shaft • Shaft end of the cylinder tube has M20 x 1.5 threading (with nut), base end features a M20 x 1.5 threaded tang (with nut) that is 0.4" (10 mm) wide and has a .3" (8 mm) cross hole • Bore: 0.8" (20 mm), rod dia.: 0.4" (10 mm), rod end threading: M8 x 1.25, Ports: 1/8" NPT • Max. continuous pressure: 130 PSI Stroke 1" (25 mm) 2" (50 mm) 3.9" (100 mm) 5.9" (150 mm) 7.9" (200 mm) 9.8" (250 mm) 11.8" (300 mm)

Retracted length Wt. (lbs.) 5.9" (151 mm) 0.5 6.9" (176 mm) 0.5 8.9" (226 mm) 0.7 10.9" (276 mm) 0.8 12.8" (326 mm) 0.9 14.8" (376 mm) 1.1 16.8" (426 mm) 1.2

ITEM PRICE 8003980 30.99 8003985 31.99 8003987 34.99 8003988 38.99 8003989 42.99 8003990 45.99 8003995 48.99

BASE MOUNT TIE ROD AIR CYLINDERS • Features an aluminum cylinder body and chromed steel shaft • Foot mount brackets at each end of the cylinder housing with .4" (9 mm) dia. mounting holes spaced 1.4" (36 mm) apart • Bore: 1.6" (40 mm), rod dia.: .6" (16 mm), rod end threading: M12 x 1.25, ports: 1/4" NPT • Max. continuous pressure: 130 PSI Stroke 1" (25 mm) 2" (50 mm) 3.9" (100 mm) 5.9" (150 mm) 7.9" (200 mm) 11.8" (300 mm) 19.7" (500 mm)

Retracted length Wt. (lbs.) 6.8" (173 mm) 2.2 7.8" (198 mm) 2.4 9.8" (248 mm) 2.7 11.7" (298 mm) 3.1 13.7" (348 mm) 3.4 17.6" (448 mm) 4.1 25.5" (648 mm) 5.5

ITEM PRICE 8003998 46.99 8004002 49.99 8004005 53.99 8004008 58.99 8004010 63.99 8004011 79.99 8004012 96.99

* Measurements in inches are approximations

CYLINDER ROD END SWIVEL EYES

CYLINDER ROD END TANG and CLEVIS TANG: 8 MM X 1.25 THREADING

Grease nipple for easy lubrication. 8 MM X 1.25 THREADING

0.3" (8 mm) pinhole dia. x 0.5" (12 mm) thick. 8004014 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

12 MM X 1.25 THREADING

0.5" (12 mm) pinhole dia. x 0.6" (16 mm) thick. 8004015 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

999

CLEVIS WITH PIN: 12MM X 1.25 THREADING

Clevis inside width: 1/2" (12 mm), pin diameter: 1/2” (12 mm) 8004055 – Wt. 0.4 lbs.

1499

AIR FLOW (SPEED) CONTROLS

MANUAL CONTROL VALVE A

Tang thickness 0.3" (8 mm) with a 0.3" (8 mm) cross hole. 8004013 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

R1 P R2

• 5 way, 2 position • Max. continuous pressure: 100 PSI • Max. continuous flow: 15 SCFM • Three 1/4" NPT pressure ports and two 1/4" NPT exhaust ports • Control 1 double or 2 single acting pneumatic cylinders 8004043 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

3599

• Max. continuous pressure: 130 PSI • Features controlled flow in one direction and full flow in the opposite direction • Ports: 1/4" NPT Max. continuous flow: 8.5 CFM 99 8004050 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . Max. continuous flow: 28.0 CFM 99 8004051 – Wt. 0.3 lbs . . . . . . . . . . . . . . . . . . . . . .

8 12

PNEUMATIC PRODUCTS

ROLLER TYPE LEVER CONTROL VALVE A

12 VDC SOLENOID ACTIVATED CONTROL VALVE A B

P R

• 2 way, 2 position • Max. continuous pressure: 130 PSI • Max. continuous flow: 60 SCFM • Two 1/4" NPT ports, normally closed 8004049 – Wt. 0.3 lbs.. . . . . . . . . . . . . . . . . . . . .

1499

PUSH BUTTON CONTROL VALVE

R 1 P R2

A B

R 1 P R2

• 5 way, 3 position • Max. continuous pressure: 100 PSI • Max. continuous flow: 15 SCFM • Three 1/4" NPT pressure ports and two 1/4" NPT exhaust ports • Manual release valves • Control 1 double or 2 single acting pneumatic cylinders 8004053 – Wt. 0.9 lbs.. . . . . . . . . . . . . . . . . . . . . .

8499

• 5 way, 2 position • Max. continuous pressure: 130 PSI • Max. continuous flow: 11 SCFM • Momentary actuation • Three 1/4" NPT pressure ports and two 1/8" NPT exhaust ports • Control 1 double or 2 single acting pneumatic cylinders 99 8004046 – Wt. 0.4 lbs.. . . . . . . . . . . . . . . . . . . . .

Y D R A U L I C S

HIGH PRESSURE HYDRAULIC PISTON PUMPS Pressures up to 5,000 PSI.

Willams pumps are stocked in all stores west of Winnipeg. Please call 1-800-665-8685 for special orders.

The WILLIAMS Piston Pump is a compact, bi-rotational, and completely self-contained hydraulic power unit. Its extreme reliability and durability make it suited to a wide range of applications including: hoists, presses, dump bodies, and trucks. Features: • Built-in pressure relief • Constant flow at low RPMs • High contamination tolerance • All interior parts submerged in oil for longer life • Steel intake and exhaust valves • Bi-rotational • Double acting control valves • 1" shaft (with 1/2 woodruff key) • 3/8" NPT ports • 4, and 8 piston designs Model NO.

Displ. Cu. Min/Max. GPM @ Relief Valve Reservoir O’all dim. Wt. ITEM PRICE In. /Rev. RPM's Max. Pressure (US GAL) (L x H x W) (lbs.) RPM Setting 40-4-15 0.9 300-1,000 3.3 3,000 3.75 15-3/8" x 10" 53.0 1220029 549.99 x 11-1/4" F98-4-21* 2.6 300-1,300 13.2 3,000 5.25 20-3/4" x 77.5 1220045 749.99 13-1/2" x 12" * Maximum pressure on these units can be increased to 5,000 PSI when relief valve # 7120007 is installed. Available by special order. Call 1-204-654-5249 for more information. Replacement pumps available on request.

VALVE ADAPTER PLATE

REPLACEMENT BREATHER CAPS

For Williams pumps. 1252923 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

• Enables a remote directional control valve to be used with the piston pumps • Remove standard valve, bolt on adapter plate and plumb remote valve with hoses • 1/2" NPT ports 1291400 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3599

POWER PACKS

H Y D R A U L I C S

SINGLE-STAGE GAS POWERED HYDRAULIC POWER PACKS Portable hydraulic power using reliable Honda engines, and a Haldex pump with cast iron body and hardened steel gears. A) 5 HP HONDA GC

• Max. cont. pressure: 3,000 PSI • Max. cont. flow: 2 GPM • Ports: #8 O-Ring Boss 1270026 – Wt. 38.4 lbs. . . . . . . . . . . . .

• Max. cont. pressure: 3,000 PSI • Max. cont. flow: 4 GPM • Ports: #8 O-Ring Boss 1270105 – Wt. 90.2 lbs. . . . . . . . . .

129999

2-STAGE GAS POWERED HYDRAULIC POWER PACKS

IDEAL FOR LOGSPLITTERS

These power packs can be used anywhere. They have a gas engine coupled directly to a 2-stage high/low hydraulic pump. The pumps deliver high volume at low pressure and low volume at high pressure. C & D: Inlet 1" tube, outlet 1/2" FNPT. E: Inlet 1" FNTP, outlet 3/4" FNPT

Volume (GPM)@ Max. PSI@ 3,600 RPM 3,600 RPM Low High C 5.0 HP Honda GC 2,500 10.6 2.9 D 5.5 HP Honda GX* 3,000 10.6 2.9 D 9 HP Honda GX* 3,000 16.0 4.0 E 11 HP Honda GX* 2,100 21.4 6.1 *Engine has low oil alert and overhead valves. Engine

2 HP AC POWER PACK IDEAL FOR PRESSES AND COMPACTORS!

62999

B) 11 HP HONDA GX

• Motor: 2 HP, 115/230 V, 18/9 A, 3,450 RPM • Pump: Williams 2-piston pump, 1.75 GPM • Valve: Double acting factory preset @ 2,200 PSI, 3/8" NPT work ports • Reservoir: 7 qt. • O’all dim.: 16" x 21" x 18" 99 1270099 – Wt. 97.4 lbs. . . . . . . . . . . . . .

799

Wt. (lbs.) 41.3 48.3 79.1 104.2

ITEM

PRICE

1270037 1270004 1270005 1270106

649.99 899.99 1199.99 1599.99

2-STAGE GAS POWERED PORTABLE HYDRAPACK Features: • 5.5 HP Honda GX engine coupled to a Haldex 2 stage hydraulic pump • BM 40 double acting control valve • Hydraulic return line oil filter (10 micron) • Reservoir mounted suction strainer (#100 Mesh) • 9 gal. baffled reservoir with temp. and oil level gauge • Glycerin filled pressure gauge (0-3,000 PSI) • DNP style 1/2" quick disconnect couplers • Frame mounted tool tray Specifications: Max. cont. pressure: 3,000 PSI Max. cont. flow: Low pressure - 7 GPM @ 3,600 RPM High pressure - 1.5 GPM @ 3,600 RPM 99 8015426 –Wt. 230.0 lbs. . . . . . . . . . . . . . . . . . . . .

1799

ELECTRIC POWER PACKS with RESERVOIRS

• On/off switch wired to motor • Directional control valve is required

A Volt

• 2-stage pump features 4.3 GPM up to 600 PSI • 0.6 GPM from 600 to 3,600 PSI • On/off switch wired to motor • Ideal for presses and compactors • Directional control valve is required

GPM

Relief setting A 208-230 2 1.47 3,800 PSI B 115/ 2 4.3 up to 600 PSI * 208-230 0.6 3,600 PSI * Draws 22 amps @ 115 volts.

Ports 3/8" NPT 3/8" NPT

Reservoir (US gallon) 0.75 1.0

Duty Cycle 10% Cont.

These power packs feature a high torque electric motor directly coupled to a single stage hydraulic pump. They can be used for a wide variety of applications including presses, scissor lifts, car hoists, etc.

C D

115/230 230

2 5

Max. continuous pressure (PSI) 1,700 2,000

PRICE

1270023 669.99 1270038 969.99

HIGH FLOW RATE

ELECTRIC POWER PACKS

Volt

B ITEM

Wt. (lbs.) 51.9 53.2

C Max. continuous flow (GPM) 1.9 3.8

Inlet/Outlet ports #8 ORB #10 ORB

Wt. (lbs.) 50.7 60.0

ITEM

PRICE

8028895 8020072

549.99 599.99

H Y D R A U L I C S

PICK - A - PACK CUSTOM BUILT HYDRAULIC POWER PACKS 14 Optional Reservoirs

Optional Solenoid or Manual Valves

Call 1-204-654-5249, 7 days a week for information. 8 Pump Options

2 Optional AC Motors

Delivery guaranteed in 2 weeks or less.

Now available in our Whitby, Ottawa, Langley and Panet locations! METAL RESERVOIRS

*AC NEMA MOTORS

Single phase. HP RPM Volts 1 3,450 115/230 2 3,450 115/230

We also carry many plastic reservoirs. Hz ITEM PRICE 60 1270042 569.99 60 1270043 639.99

PUMPS

Type 0.061 cu. in./rev. (1.0 cc/rev.) 0.073 cu. in./rev. (1.2 cc/rev.) 0.098 cu. in./rev. (1.6 cc/rev.) 0.122 cu. in./rev. (2.0 cc/rev.) 0.153 cu. in./rev. (2.5 cc/rev.) 0.189 cu. in./rev. (3.1 cc/rev.) 0.244 cu. in./rev. (4.0 cc/rev.) 0.305 cu. in./rev. (5.0 cc/rev.)

ITEM 1270047 1270048 1270049 1270050 1270051 1270052 1270053 1270054

PRICE 129.99 129.99 129.99 129.99 139.99 139.99 139.99 159.99

Nominal Useable Useable Capacity Horizontal Vertical (US GAL) (cu. in.) (cu. in.) ITEM 1.00 170 200 1270102 1.50 270 220 1270067 2.50 390 380 1270068 3.00 500 520 1270069

PRICE 89.99 109.99 119.99 129.99

Valves and accessories also required. All components are available individually for use as replacement parts. * 12 VDC Motors are also available.

CUSTOM BUILT POWER PACKS

H Y D R A U L I C S

GAS ENGINES

SEE PAGE 92

ELECTRIC MOTORS

SHAFT COUPLERS

MOUNTING BRACKETS

HYDRAULIC PUMPS

SEE BELOW OR PAGE 75 - 76

SEE PAGE 97

SEE BELOW

SEE PAGE 16 - 17

We can help you build a power pack to your specifications. • Over 150 different possible power pack combinations • Our PAL Hydraulics team members can help you make the right selection of motor/gas engine, pump mounting bracket, shaft couplers and pump to meet your flow and pressure requirements

ELECTRIC C-FACE MOTORS

D HP A B C D E F

2 3 5 2 3 5

Volts

Full Load Amps @ 115V-208V / 230V 115 / 230 17 / 8.5 115 / 230 34 / 17 230 20 115-208 / 230 17.2 / 9.2 / 8.6 208 / 230 13.5 / 12.5 208 / 230 22 G

RPM

Shaft Frame Size

1,800 1,800 1,800 3,600 3,600 3,600

5/8" 5/8" 5/8" 5/8" 5/8" 3/4"

56HC 184TC 184TC 56C 56HC 56C

F Wt. (lbs.) 45.9 90.0 106.2 30.0 36.2 47.8

PRICE

8001870 8001871 8001872 8001865 8001866 8001867

249.99 429.99 649.99 219.99 239.99 299.99

J K

Wt. (lbs.) ITEM PRICE

ELECTRIC C-FACE MOTOR BRACKETS

Frame Pump Mount Size Type G 56C, 2-Bolt SAE 56HC Type A H 184 TC 2-Bolt SAE Type A I 56C, 4-bolt 56HC J 184TC 4-Bolt

ITEM

GAS ENGINE BRACKETS

2.4 8009335 59.99

4.9 8009353 79.99

2.6 8009326 59.99 5.2 8009344 79.99

M N

HP Pump Mount Type 5 2-Bolt SAE Type A 8-20 2-Bolt SAE Type A 5 4-bolt 8-20 4-Bolt

Wt. (lbs.)

ITEM

2.0

8009308 69.99

3.8 1.3 3.8

8001759 99.99 2400463 44.99 2400003 64.99

FOOT MOUNT BRACKETS

O P

Pump Mount Type 4-Bolt 2-Bolt SAE Type A

Wt. (lbs.) 0.8 1.7

PRICE

ITEM 8039712 8009317

PRICE 49.99 22.99

12 VDC HYDRAULIC POWER PACKS

These self-contained power packs can be used for a wide range of applications including cranes, dump boxes, tailgate lifts and farm machinery. They are extremely reliable and perform well in a wide variety of applications. Each power pack consists of a 12 VDC motor, hydraulic pump, reservoir, valving system, and remote power switch. Specifications: • 2.8 GPM @ 0 PSI @ 70 amps • 1.3 GPM @ 2,500 PSI @ 260 amps • Relief valve: preset @ 2,500 PSI, adjustable from 500 - 3,000 PSI • Ports: #6 ORB • Reservior: 3 qt.

Y D R A U L I C S

A) SINGLE ACTING – SOLENOID OPERATED

• Use with single-acting hydraulic cylinders • Includes remote switch with 10 ft. cord 8002286 – Wt. 35.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

49999

B) DOUBLE ACTING – SOLENOID OPERATED

• Use with double acting hydraulic cylinders • Includes remote switch with 10 ft. cord 8002290 – Wt. 35.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

59999

C) REPLACEMENT REMOTE SWITCHES

For single acting – solenoid operated power pack (8002286) 8002439 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . For double acting – solenoid operated power pack (8002290) 8002441 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

5999 6499

D) 2.5 US GALLON POWER PACK RESERVOIR

Replace existing reservoir when extra oil capacity is needed. 99 8002505 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

12 VDC DUAL VALVE “SNOW PLOW” POWER PACK Specifications: • 2.4 GPM @ 0 PSI @ 80 amps • 1.3 GPM @ 1,800 PSI @ 170 amps • Relief valve: preset @ 2,000 PSI, • Ports: 1/4" NPT, • Reservoir: 1.5 qt. • Designed to operate all functions of a power operated angling snowplow • The unit includes a lift-hold-lower function for the blade, with a continuous “float” capability • A directional valve controls angling of the blade and 2 cross-over reliefs protect the system from damage should the blade become obstructed while plowing • Includes remote switch box with 10 ft. cord 99 8002291 – Wt. 43.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

879

12 VDC 3-PISTON HYDRAULIC PISTON PUMP

Up to 5,000 PSI

FEATURES:

• Unique feature of being Power Up, Power Down, and Gravity Down • Also has “Recycle System” that directs oil flow from rod end of cylinder to base end. Only excess oil goes to the reservoir allowing the use of a considerably smaller reservoir.

• Max. continuous pressure: 5,000 PSI • Max. continuous flow: 1.5 GPM @ 0 PSI @ 80 amps, 0.5 GPM @ 5,000 PSI @ 310 amps • Relief valve: preset @ 3,000 PSI adjustable from 500 - 5,000 PSI • Ports: 1/4" NPT • Reservoir: 0.66 US gallons 99 1270093 – Wt. 25.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

699

HYDRAULIC PUMPS

H Y D R A U L I C S

RONZIO HYDRAULIC GEAR PUMPS Features

High speed Reversible

Benefits

Direct drive from gas engines Useful for more than one application

• 3/4" shaft with keyway • CW rotation is reversible with minor changes to pump configuration (instructions included) • Pump has SAE type "A" 2-bolt flange • Cast iron end caps and steel gears with an aluminum gear housing Model #

PZ2CG04… PZ2CG06… PZ2CG08… PZ2CG11… PZ2CG14… PZ2CG17… PZ2CG20… PZ2CG25… PZ2CG31…

Displ. (Cu. In /Rev.) 0.269 0.384 0.498 0.69 0.882 1.03 1.23 1.57 1.92

Pressure (PSI) Max Cont. Peak 4,350 5,220 4,350 5,220 4,350 5,220 4,350 5,220 4,350 5,220 3,910 4,780 3,330 4,200 2,610 3,330 2,320 2,900

PUMP to MOTOR CONVERSION KIT

Converts pumps listed above to unidirectional motors. 8003893 – Wt. 0.1 lbs. . . . . .

2199

Max. GPM 6.40 9.14 10.13 11.95 12.60 13.38 15.97 20.39 22.44

RPM Min. 1,000 700 550 450 400 350 300 250 200

Max. 5,500 5,500 4,700 4,000 3,300 3,000 3,000 3,000 2,700

In/ Out Wt. Port Sizes (lbs.) (ORB) 10/10 8.3 10/10 8.0 10/10 8.7 10/10 9.3 10/10 9.8 12/10 9.5 12/10 10.3 12/10 11.0 12/10 11.2

ITEM

PRICE

8025102 8025111 8025120 8025139 8025148 8025166 8025175 8025184 8025193

199.99 204.99 209.99 214.99 219.99 229.99 239.99 249.99 259.99

TECH TIP Q. How do I change my RONZIO gear pump into a unidirectional motor? A. First you must install the conversion kit (item 8003893) which consists of a high pressure shaft seal and back up washer. Then you must choose your rotation and configure the gears and bushing blocks within the motor so the slippage oil returns to the return line port. For more information on how to do this conversion, contact your local store, our National Call Centre at 1-800-665-8685, or Gary Laws at 1-204-654-5209.

PRINCE HYDRAULIC GEAR PUMPS Features

Benefits

Non-symmetrical gears

Increased flow capacity, quieter running PTFE composite bearings Handle heavy loads, low shaft speeds and high levels of contamination • 7/8" shaft with keyway • Pump has SAE type "B" 2-bolt flange • Aluminum housing with steel gears Model #

SP25A44..R SP25A44..L SP25A52..R SP25A52..L

Displ. (Cu. In /Rev.) 2.697 2.697 3.179 3.179

Max Cont. Pressure 3,000 3,000 2,500 2,500

Max. GPM

Max. RPM

33.61 33.61 39.63 39.63

3,000 3,000 3,000 3,000

In/ Out Rotation Port Sizes (ORB) #20/#16 CW #20/#16 CCW #20/#16 CW #20/#16 CCW

Wt. (lbs.)

ITEM

PRICE

15.0 15.0 16.0 16.0

8006587 8006589 8006590 8006591

369.99 369.99 379.99 379.99

BARNES 2-STAGE PUMPS IDEAL FOR LOGSPLITTERS

• Designed for applications requiring fast approach/retract actuator speeds due to horsepower limitations or safety concerns • Typical applications include logsplitters, presses, trash compactors and crimping machines • Shaft: 1/2" dia. x 1-1/2" long (5/8" dia. on 1222173) • Mount: 4 bolt (2 bolt SAE on 1222173) • Ports: 1" tube inlet, (1" NPTF on 1222173), 1/2" NPTF outlet (3/4" NPTF on 1222173) • Rotation: clockwise • Max. continuous pressure: 3,000 PSI • Adjustable unloader range: 400-900 PSI (400-700 on 1222173), set @ 650 PSI • 500-4,000 RPM range Low pressure gear displacement 0.517 cu. in. 0.776 cu. in. 0.930 cu. in.

High pressure gear displacement 0.194 cu. in. 0.258 cu. in. 0.465 cu. in.

Low pressure High pressure HP Wt. ITEM PRICE flow flow required (lbs.) 10.6 GPM 2.9 GPM 5 HP 8.4 1221118 219.99 16.0 GPM 4.0 GPM 8 HP 9.4 1221555 239.99 22.0 GPM 6.1 GPM 16 HP 19.0 1222173 549.99

HYDRAULIC PUMP/MOTOR • These compact pumps/motors are built with cast iron bodies, and hardened steel gears. • Suitable for use in agriculture, construction and material handling. • Bi-rotational, 1/2" shaft, 1-1/2" long. 4 bolt flange with 1.78" pilot flange. • #4 ORB case drain port must be returned to tank when used as a motor. • Can be belt or chain driven with a max. sideload of 150 lbs. • Max. 4,000 RPM. Pressure rating Flow Port Displacement Continuous Intermittent @1,800 RPM @3,600 RPM Size (cu. in./rev.) PSI PSI GPM GPM (ORB) 0.129 3,000 4,000 1.0 2.0 8 0.258 2,300 4,000 2.0 4.0 8 0.399 1,600 2,500 3.0 6.0 10 0.517 1,200 2,000 4.0 8.0 10

Wt. (lbs.) 4.6 4.6 5.5 5.5

ITEM

PRICE

1220030 1220031 1220032 1220033

184.99 189.99 194.99 199.99

Y D R A U L I C S

P.T.O. PUMPS Ideal for use with front end loaders on tractors without integral hydraulics, landscape equipment and back hoes. Slips onto tractor P.T.O. shaft, no gearbox required. • High tensile cast iron end plates and aluminum centre gear housing • Self adjusting wear plates on both sides of the gears offset wear and expansion • #16 ORB inlet and #12 ORB outlet ports • 1-3/8" diameter, 6 tooth internal splined drive shaft • Standard speed: 540 RPM for 6 tooth shaft, max. 600 RPM Displacement 5.7 cu. in./rev. 9.9 cu. in./rev.

Max. PSI 2,250 2,250

Flow @ 2,000 PSI 11.4 GPM 21 GPM

Wt. (lbs.) 35.9 40.0

ITEM 8005268 8005213

PRICE 679.99 729.99

• Cast iron body construction with internal steel gears • Max. continuous pressure: 2,465 PSI • Max. continuous flow: 37 GPM @ 1,800 RPM • Inlet/outlet ports: 1-1/4" NPT / 1" NPT • Shaft size: 1-3/8" dia., 6 tooth internal splined drive shaft • Rotation: CCW 99 8027903 –Wt. 33.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

649

TECH TIP What is the horsepower requirement to drive a pump? The general rule of thumb used is 1 HP per gallon per minute at 1,500 PSI. The exact calculation is GPM multiplied by PSI. Divide this by 1714 then multiply by the pump’s efficiency. Gear pumps run from 75% to 85% efficient, vane, and piston pumps are slightly higher.

H Y D R A U L I C S

GEROTOR-TYPE MOTORS • Compact & lightweight • High speed • Bi-rotational • Shaft dia.: 9/16" • Ports: #10 ORB • Max. speed: 5,000 RPM Displ. Max. Cont. Flow (GPM) Max. Shaft Side (Cu. In./ Pressure Required per Torque Load* Rev.) (PSI) 1,000 RPM (in.-lbs.) (lbs.) MGG20010 0.218 2,000 0.95 70 170 MGG20016 0.372 2,000 1.61 118 130 MGG20020 0.450 2,000 1.95 144 110 MGG20025 0.580 2,000 2.51 184 70 MGG20030 0.700 1,500 3.03 166.5 30 *Maximum permissible shaft side load at 2,500 RPM and 1,000 PSI. Model #

Wt. (lbs.) 2.8 3.0 3.1 2.8 3.5

ITEM

PRICE

8006658 8006660 8006661 1220383 8006662

209.99 219.99 229.99 239.99 249.99

HYDRAULIC ORBIT MOTORS

DANFOSS MOTORS offer superior performance in a wide range of applications; agriculture, forestry, mining, construction, and marine. Features: • Instantly reversible • 1" shafts, 1/2" NPT ports • Max. continuous flow: 16 GPM (except for models with 3 cu. in./rev. displ., which are 12 GPM) 3 year manufacturer’s warranty. (For Danfoss to Char-Lynn interchangeability, please contact your nearest store.) Model #

Displ. (Cu. In./ Rev.)

Max. Cont. Pressure (PSI)

Max. Speed (RPM)

Max. Torque (in.-lbs.)

Wt. (lbs.)

ITEM

PRICE

3 4.8 5.9 9.5 11.8 14.8 18.7 23.8

1,800 1,800 1,800 1,700 1,500 1,400 1,300 1,200

930 780 620 390 310 250 200 155

700 1,110 1,400 2,080 2,360 2,700 3,140 3,630

10.5 10.9 11.2 11.8 12.4 12.8 13.5 14.4

1220565 1220573 1220581 1220599 1220607 1220008 1220014 1220631

229.99 239.99 249.99 269.99 279.99 299.99 319.99 349.99

3 4.8 5.9 9.5

1,800 1,800 1,800 1,650

930 780 625 385

700 1,110 1,400 2,020

11.1 11.5 11.7 12.4

1220649 1220656 1220672 1220680

229.99 239.99 249.99 269.99

4-BOLT MOUNT

151-2121 151-2122 151-2123 151-2125 151-2126 151-2127 151-2128 151-2129 2-BOLT MOUNT

151-2081 151-2082 151-2083 151-2085

Model #

OMS315

Displ. (Cu. In./ Rev.) 19.2

Max. Cont. Pressure (PSI) 1,700

• HIGHER TORQUE • HIGHER PRESSURE The DANFOSS OMS Series Disc Valve Motor is truly a high torque, low speed hydraulic motor. Ideal for rock pickers, windrowers, and many other applications. • 2 bolt SAE type “A” flange • Inlet/outlet ports: #10 ORB • Shaft size: 1-1/4" • #4 ORB case drain port* • 3 year manufacturer’s warranty * Should be used when more than 1 motor are connected in series Max. Cont. Max. Max. Wt. Flow Speed Torque (lbs.) ITEM PRICE (GPM) (RPM) (in.-lbs.) 20 240 4,800 27.0 1220022 649.99

CUSTOM BUILT HYDRAULIC CONTROL VALVES Designed and built to your specifications.

All custom valve designs are approved by one of our certified technicians and after assembly undergo a series of quality assurance tests to provide you with only the highest quality product.

SECTIONAL BC 20

BC 40

MONOBLOCK BM 30 BM/BF 20

• 4.5 GPM • Up to 8 sections

• 9.0 GPM • Up to 10 sections

• 4.5 GPM • Up to 6 sections

• 9.0 GPM • Up to 1 section

BC 70

BC 150

BM/BF 40

BM/BF 70

• 17.0 GPM • Up to 8 sections

• 37.0 GPM • Up to 8 sections

• 9.0 GPM • Up to 7 sections

• 17.0 GPM • Up to 6 sections

• Max. continuous pressure: 3,200 PSI (manual), 2,600 PSI (electric) • Max. return line pressure: 550 PSI • O-Ring Boss ports for high pressure leak proof sealing • Open or closed centre

VALVE SECTION OPTIONS: 14 DIFFERENT ACTUATORS*

Including: manual, 12/24 VDC solenoid, pneumatic, hydraulic etc. 15 DIFFERENT SPOOL TYPES*

Including: single acting, motor, float, regenerative, etc. 19 DIFFERENT POSITIONERS*

Including: from 1 to 4 positional detent combinations, spring return to neutral etc. Other section options include priority adjustable flow control, integrated priority adjustable flow control, work port relief, anticavitation and micro switch capability

H Y D R A U L I C S

BM 150 • 37.0 GPM • Up to 1 section • Max. continuous pressure: 3,600 PSI • Max. return line pressure: 1,100 PSI • O-Ring Boss ports for high pressure leak proof sealing

VALVE OPTIONS: 3 DIFFERENT ACTUATORS*

Including: standard lever, joystick, pneumatic 4 DIFFERENT SPOOL TYPES*

Including: single acting, double acting, motor and float spools 7 DIFFERENT POSITIONERS*

Including: from 1 to 4 positional detent combinations, spring return to neutral etc. Other valve options include open or closed centre, power beyond capability (allows the addition of a valve downstream) and choice of relief valve and pressure setting

* This is only a partial listing of the components and customization that are available for the BLB Sectional and Monoblock control valves. If you require information on pricing, additional features or need help choosing the correct valve for your application please talk to our trained PAL Hydraulics team members at: Your nearest store, our mail order department, or contact Gary Laws at 1-204-654-5209.

BM/BF SERIES MONOBLOCK DIRECTIONAL CONTROL VALVES

H Y D R A U L I C S

A STANDARD

B JOYSTICK

DETENT FLOAT POSITION

Features: • Standard 3-position, 4-way/spring return to neutral unless otherwise stated • Open centre • Maximum return line pressure: 1,100 PSI • Relief valve pre-set at 2,100 PSI/ adjustable from 1,500 PSI to 3,750 PSI • Control handles can be mounted in vertical or horizontal position

INTERGRATED FLOW CONTROL FLEXIBLE VALVE CONFIGURATION SEE PAGE 23 FOR AVAILABLE OPTIONS.

SPECIFICATIONS:

BM 20 BM 30 BM 40 BF 40 BM 70 BM 150

Max. cont. Peak pressure Max. cont. pressure (PSI) (PSI) flow (GPM) 3,600 4,700 4.5 3,600 4,700 9 3,600 4,700 9 3,600 4,700 9 3,600 4,700 17 3,600 4,700 37

BM 40 SERIES

BM 20 SERIES A A A A A A

Single spool Double spool Three spool Four spool Five spool Six spool

Wt. (lbs.) 3.7 5.5 7.5 9.4 11.3 13.4

ITEM 1249531 1249549 1249556 1249564 1249572 1249580

PRICE 139.99 229.99 319.99 399.99 479.99 549.99

BM 30 SERIES A

Single spool

Peak Flow Top Inlet/Outlet and Side Inlet/ (GPM) Outlet ports work ports 6.6 #6 ORB #8 ORB 12 #8 ORB #8 ORB 12 #8 ORB #10 ORB 12 #8 ORB #10 ORB 24 #10 ORB #12 ORB 48 #16 ORB #16 ORB

Wt. (lbs.) ITEM 4.6 1249598

PRICE 119.99

A Single spool A Double spool A Three spool A Four spool A Five spool A Six spool A Seven spool B Single float spool B Double spool

Wt. (lbs.) 5.6 8.3 11.4 14.3 17.6 20.4 24.6 6.1 8.9

ITEM 1249721 1249739 1249747 1249754 8050315 8050342 8050351 1249705 1249713

PRICE 169.99 249.99 349.99 419.99 519.99 599.99 669.99 199.99 269.99

(float/standard) C Double spool with

8006338 439.99

8.4

joystick BF 40 SERIES

Integrated Pressure Compensated Flow Control Feature

Benefit

Integrated flow control

Less cost than two separate valves Flow only diverted Less heat generated and through flow control full flow available when when handle is activated handle is in neutral Pressure compensation Flow is not affected by pressure change • Flow control only regulates flow in first spool

BM 70 SERIES A Single spool A Double spool A Three spool A Four spool A Five spool A Six spool B Single spool (float) B Double spool C

(float/standard) Double spool with joystick

Wt. (lbs.) 10.4 15.5 21.0 25.7 30.3 36.3 10.6 15.9 15.8

ITEM 1249796 1249804 1249812 1249820 1249838 1249846 1249762 1249770

PRICE 229.99 339.99 449.99 559.99 679.99 799.99 259.99 379.99

1249788 499.99

BM 150 SERIES

Wt. (lbs.) ITEM PRICE D Single spool 8.6 1249655 289.99 D Double spool 11.9 1249663 399.99

HIGH FLOW CAPACITY. Wt. (lbs.) A Single spool 20.5

ITEM 8001221

PRICE 369.99

MONOBLOCK DIRECTIONAL CONTROL VALVES

Features: • Standard 4-way, 3-position valve • Double acting, open centre • Max. continuous pressure: 2,000 PSI • Max. continuous flow: 20 GPM • Ball/spring type relief valve factory set @ 1,500 PSI • 2 or more spools can be shifted at the same time • Each spool is equipped with load checks • Control handles may be mounted in “UP” or “DOWN” position • 3/4" NPT inlet and outlet ports, 1/2" NPT work ports • Can be converted to closed centre (with optional plug below) • Can be converted to power beyond to allow for the addition of down stream valves (with optional plug below)

Spool(s) Model Wt. ITEM PRICE (lbs.) 1 SPXTE 24.8 1241975 229.99 2 SPXTE 25.0 1241967 329.99 3 SPXTE 33.7 1241959 429.99

CONTROL VALVE ACCESSORIES REPLACEMENT HANDLES

For above valves. 1242163 – Wt. 0.8 lbs. . . . . . . . . . . . . . .

CONVERSION PORT MODIFICATION KITS

Includes all necessary seals.

3-POSITION DETENT KIT

• Converts spool from spring return to neutral to detent in 3 positions (spool holds in position when shifted) • Can be used on 1 or more spools • For all SP valves 99 1252428 – Wt. 0.3 lbs. . . . . . . . . . . . . . .

Parker # A K-SP-75-Y B

K-SP-C

Description

Wt. ITEM PRICE (lbs.) 0.3 1252394 31.99

Y D R A U L I C S

3/4" NPT power beyond sleeve kit Closed centre plug kit 0.6 1252402 25.99

SINGLE SPOOL DIRECTIONAL CONTROL VALVES Feature Benefit FM 55 SERIES 13 GPM @ 3,200 PSI FLEXIBLE VALVE CONFIGURATION SEE PAGE 23 FOR AVAILABLE OPTIONS.

Compact size Convertible to single acting, motor spool, and detent positioning

Meets demand of higher flow actuators Designed for where weight and space restrictions are specified Easily adaptable to fit a wide variety of applications

Features/Specifications: • Max. continuous pressure: 3,200 PSI • Peak pressure: 4,400 PSI • Maximum continuous flow: 13.1 GPM • Peak flow: 18.4 GPM • Work port size: #10 ORB, inlet/outlet port size: #10 ORB • Relief valve: preset @ 2,030 PSI, adjustable from 1,450 to 3,625 PSI SINGLE SPOOL

• Designed to control a double acting cylinder or a reversible hydraulic motor • 4-way, 3-position 99 8003849 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

159

Features/Specifications: • Max. continuous pressure: 2,000 PSI • Max. continuous flow: 16 GPM • Adjustable relief (900-2,000 PSI), factory set @ 1,500 PSI • Open centre design • Spring return to neutral (except 1240373) • 3/4" inlet/outlet ports, 1/2" work ports

D) 410 HP VALVE C) 400 HP VALVE

• Designed to control a double acting cylinder or a reversible hydraulic motor • 4-way, 3-position 99 1240357 – Wt. 9.4 lbs. . .

149

• Detent positions: handle locks in forward, neutral, and reverse to control hydraulic motors • Work ports are open to tank in neutral • 4-way, 3-position 99 1240373 – Wt. 9.9 lbs. . . . . . . . . .

199

HYDRAULIC KICK-OFF VALVES

H Y D R A U L I C S

• Ideal for logsplitters • Spring return one direction, detented the other • Detented return position allows hands-free operation while the cylinder is retracting and automatically shifts the spool to neutral at the end of the cylinder's stroke B

B) BLB BM 30*

HYDR

• Non-adjustable kick off pressure set at 600 PSI • Open centre

AULI

C) BLB BM 70*

A A) ENERGY

• Non-adjustable kick off pressure • Open centre

• Adjustable kick-off pressure preset at 1,000 PSI and adjustable from 580 - 3,625 PSI • Open or closed centre (Must use closed centre plug - see page 23) * When the valve is in the detented return position it can not be manually shifted to neutral * The “A” workport (closest to the handle) must be connected to the rod end of the cylinder for proper kick off operation

Max. Continuous Max. Continuous Pressure Flow A 2,500 PSI 20 GPM B 3,600 PSI 9 GPM C 3,600 PSI 17 GPM

Work Ports

Inlet/Outlet Wt. ITEM PRICE Ports (lbs.) 1/2" NPT 3/4" NPT 9.0 1242296 149.99 #8 ORB #8 ORB 4.8 8002312 139.99 #10 ORB #10 ORB Top/#12 ORB Side 10.6 8002364 199.99

SOLENOID OPERATED VALVES

2-POSITION 4-WAY REVERSING SOLENOID SPOOL VALVE

• Max. continuous pressure: 3,000 PSI • Anodized aluminum bodies • 1 pc. cartridge housing ensures internal concentricity • Weatherproof, high wattage 12 VDC coils 2-POSITION 2-WAY SOLENOID POPPET VALVES

• Max. continuous flow: 18 GPM • Features a leak tight design Wt. 1.2 lbs.

139

8033335 – Normally open. 2-way valve closes when the solenoid is energized. 8033326 – Normally closed. 2-way valve opens when the solenoid is energized. . . . . . . . . . . . . . . . . . . .

3-POSITION 4-WAY SOLENOID SPOOL VALVES

19999/ea.

2-POSITION 3-WAY SOLENOID SPOOL VALVE

• Max. continuous flow: 8.5 GPM • Free flow between ports 2 and 3 when the solenoid is de-energized • Free flow between ports 1 and 2 when the solenoid is energized • Acts similar to a 3-way 2-position manual selector valve 8033344 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Free flow between ports 2 and 1; 3 and 4 when the push solenoid is energized • Free flow between ports 2 and 3; 1 and 4 when the pull solenoid is energized • Designed to operate double acting cylinders, pilot circuits and bi-directional motors, etc. OPEN CENTRE

• Max. continuous flow: 5.5 GPM • When both solenoids are de-energized all ports are connected 8033362 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . .

21999

TANDEM CENTRE

12999

OPTIONAL HIGH WATTAGE SOLENOID COILS

• Max. continuous flow: 9 GPM • Free flow between ports 2 and 1; 3 and 4 when the solenoid is de-energized • Free flow between ports 2 and 3; 1 and 4 when the solenoid is energized • Designed to operate double acting cylinders, pilot circuits and bi-directional motors • No neutral position 99 8033353 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . .

115 VAC, 0.26 amps with DIN connector. 8033371 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4999

• Max. continuous flow: 7.0 GPM • When both solenoids are de-energized, work ports are blocked and ports 2 and 4 are connected 99 8046688 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . .

229

ACCESSORIES for HYDRAULIC CONTROL VALVES

H D

B FULLY BACKED BY OUR ROYAL SERVICE PROMISE

F A G ITEM PRICE

A) SINGLE ACTING SPOOLS

• BM20, BC20 Valves 1259027 24.99 • BM30/40, BF40, BC40, FM55 1259092 26.99 • BM70, BC70 Valves 1259159 38.99

C Accessories are shown as optional parts for a standard valve. NOTE: All these accessories are easily field installed.

Y D R A U L I C S

ITEM PRICE

B) MOTOR SPOOLS

• BM20, BC20 Valves 1259019 26.99 • BM30/40, BF40, BC40, FM55 1259084 27.99 • BM70, BC70 Valves 1259142 38.99

C) RELIEF VALVE PLUGS

• BM20, BC20 Valves 1250032 15.99 • BM30/40, BF40, BC40, FM55 1259076 17.99 • BM70, BC70 Valves 1250033 21.99

D) CLOSED CENTER PLUGS

• BM20, BC20 Valves 1250107 15.99 • BM30/40, BF40, BC40, FM55 1259068 16.99 • BM70, BC70 Valves 1259134 17.99

E) POWER BEYOND ADAPTERS

• BM20, BC20 Valves • BM40, BF40, BC40, FM55 • BM70, BC70 Valves

1259001 17.99 1259050 19.99 1259126 21.99

F) DETENT KITS

• BM20, BC20 Valves 1259035 19.99 • BM30/40, BF40, BC40, FM55 1259100 21.99 • BM70, BC70 Valves 1259167 26.99

G) MICRO SWITCHES

• BM20, BC20 Valves 1259043 49.99 • BM30/40, BF40, BC40, FM55 1259118 49.99

JOYSTICK KITS

O-RING KITS

Kit for BM40 valves. (Excludes float position spool). 99 1250104 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . Kit for BM70 valves (Excludes float position spool). 99 1259175 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . Spools must be changed for BM 40 series. 1250110 – Double acting spool 1250111 – Single acting spool 99 1250112 – Motor spool . . . . . . . . . . . . . . . . . . • Available by special order, stocked in Winnipeg • If valve is new, credit will be given for spools that are removed

169

• Replacement valve spool O-rings • Pkg. of 10 BM20, BC20 8006222 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . BM30/40, BF40, BC40, FM55 8006226 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . BM70, BC70 8006227 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

199

999 999 999

TECH TIP Can the optional hydraulic control valve components I require be installed for me? We offer a custom-built valve program that can have any valve modifications you require done directly at our factory for you. You can call or visit any of our stores or mail order department for more information.

H Y D R A U L I C S

HYDRAULIC VALVE REMOTE CONTROL SYSTEM

• The control connects to the front of BLB valves allowing remote operation • Remote valve control can be mounted up to 9-3/4 ft. away from the hydraulic valve A) JOYSTICK REMOTE VALVE CONTROL

• Shift 2 hydraulic spools with 1 control • Weatherproof control can be mounted on interior or exterior of vehicle 99 8000977 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . .

139

B) SINGLE AXIS REMOTE VALVE CONTROL

• Units can be mounted individually or stacked for multi-spool valves • Weatherproof control can be mounted on interior or exterior of vehicle 99 8000986 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

C) REMOTE VALVE CONTROL CABLES

Length 39" 59" 78" 118"

D B

Wt. (lbs.) 0.7 1.3 1.7 1.7

ITEM 8000995 8001002 8001020 8001057

PRICE 54.99 59.99 64.99 74.99

D) VALVE CONNECTION KITS

VALVE NOT INCLUDED

Fits valve BM 20 BM 40 BM 70

P.T.O. CABLES & ACCESSORIES

Wt. (lbs.) 0.3 0.2 0.2

ITEM 8031863 8001075 8001084

PRICE 21.99 22.99 22.99

E) P.T.O. AND VALVE CONTROL CABLES

• 5" travel • 1/2"-20 thread mount • 0.091" dia. oil tempered steel cable • 0.375" dia. conduit

10 FT. LONG 3890492 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

15 FT. LONG 3890493 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) KNOB

2599 3199

• 2" dia. black knobs for use on P.T.O. cable, etc. • 3/8" 24-thread 99 3891348 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) BOWDEN PIN

Attaches cable end to 3/16" thick lever with 1/4" hole. 3890502 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

ADJUSTABLE YOKE with PIN

ROD ENDS

419

Wt. 0.1 lbs.

Thread Size 1/4"- 28 NF 5/16"- 24 NF 3/8"- 24 NF 1/2"- 20 NF

ITEM 3870009 3870010 3870012 3870013

PRICE 3.29 3.99 5.49 9.99

ITEM 3870020 3870021 3870022 3870023

PRICE 12.99 13.99 15.99 28.99

C Approx. Wt. 0.1 lbs. 1/4-28NF THREAD.

A: 2", B: 1-1/4", C: 9/32". 3880036 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

449

5/16-24NF THREAD.

A: 2-1/4", B: 1-7/16", C: 11/32". 3880044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

Thread Size Hole Dia. 1/4"- 28 NF 1/4" 5/16"- 24 NF 5/16" 3/8"- 24 NF 3/8" 1/2"- 20 NF 1/2"

ITEM 3870025 3870026 3870027 3870028

PRICE 11.99 12.99 14.99 24.99

ITEM 3870015 3870016 3870017 3870018

PRICE 8.99 9.99 11.99 22.99

469

3/8-24NF THREAD.

A: 2-1/2", B: 1-5/8", C: 7/16". 3880051 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

459

1/2-20NF THREAD.

A: 3", B: 1-7/8", C: 9/16". 3880069 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

HYDRAULIC SELECTOR VALVES

H Y D R A U L I C S

3-POSITION, 3-WAY SELECTOR VALVE

• Use to split the incoming flow between 2 outlets (A,B) or direct the flow to 1 outlet at a time • Possible applications include running 2 hydraulic motors at the same time or individually or controlling 2 single acting hydraulic cylinders in tandem or separately with one 3-way, 2-position control valve Model #

Max Flow (GPM) D3GF8A 9-1/2 D3GF10A 15 D3GF12A 25

Max. Ports Wt. ITEM PRICE PSI (ORB) (lbs.) 3,625 8 1.9 8006793 49.99 3,625 10 2.8 8006800 59.99 3,625 12 4.5 8006819 69.99

3-POSITION, 4-WAY SELECTOR VALVE

• Use to either direct incoming flow to port A and allow return flow through port B or incoming flow through port B and return flow through port A • Ports are blocked the in centre position Model # Max Flow Max. Ports Wt. ITEM PRICE (GPM) PSI (ORB) (lbs.) D4GF8 9-1/2 3,625 8 2.8 8006828 69.99 D4GF10 15 3,625 10 4.2 8006837 74.99

A B A 1 B1

3-POSITION, 6-WAY SELECTOR VALVE

Use to split 2 incoming flows into 4 outlet flows (A,B,A1,B1) or to direct the 2 incoming flows to either (A,A1) or to (B,B1) Model # Max Flow (GPM) D6GF8A 9-1/2 D6GF10A 15 D6GF12A 25

Max. Ports Wt. ITEM PRICE PSI (ORB) (lbs.) 3,625 8 3.6 8006846 119.99 3,625 10 5.6 8006855 129.99 3,625 12 8.4 8006864 149.99

A) 2-POSITION, 3-WAY SELECTOR VALVES

• Use to direct the incoming flow between 2 outlet ports by push-pull activation • Possible applications include directing the pump flow between 2 control valves or using with one 3-way, 2-position control valve to activate 2 single acting cylinders • Cast iron body, pressure balanced spool • 2,000 PSI max. continuous pressure 20 GPM MAX.

1/2" NPT ports. 1240456 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6499

30 GPM MAX.

3/4" NPT ports. 1240464 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8999

B) 2-POSITION, 6-WAY SELECTOR VALVE

• Use to direct 2 incoming flows between 2 sets of ports • Possible applications include operating 2 double acting cylinders or hydraulic motors with one 4-way 3-position control valve • 2,000 PSI max. continuous pressure • 24 GPM max. continuous flow • 3/4" NPT ports 1240449 – Wt. 11.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12999

TECH TIPS

The new valve I installed on my system does not allow me to gradually extend the cylinder and the old one used to. Why did this occur? The old valve probably had “metering notches” which act like a flow control, and allows you to operate two spools at the same time by getting a small amount of oil to each cylinder. Some spools do not have metering notches.

H Y D R A U L I C S

PRIORITY FLOW DIVIDERS/COMBINERS • Ideal for front-end loaders • Proportional-type pressure compensated flow divider divides a single flow of hydraulic oil into 2 equal flows • The flow ratio from the outlet ports remain constant although the work being done by 1 may be greater than the other • Combiner feature allows flow to be combined in reverse direction and synchronized in both directions

Model #

Max Max Ports Wt. ITEM PRICE GPM PSI (lbs.) L04A310 2.1-5.3 3,000 #8 ORB 1.0 8046697 139.99 VEQ22 F8 5-8 3,625 #8 ORB 2.8 8006766 199.99 VEQ25 F10 7-10 3,625 ** 2.8 8006775 199.99 VEQ30 F10 10-15 3,625 #10 ORB 2.7 8006784 199.99 PDC-75-50 15-35 2,500 3/4" NPT 5.5 1240571 179.99 PD-75-50 15-35 2,500 3/4" NPT 5.5 1240589 149.99 * Divider only, no reverse flow ** 2 x #8 ORB and 1 x #10 ORB A B B B C C*

PRESSURE COMPENSATED ADJUSTABLE FLOW CONTROLS

Similar to the other except with built-in adjustable relief valve. Preset at 1,500 PSI. 1/2" NPT ports, 0-16 GPM. 99 1241009 – Wt. 7.8 lbs. . . . . . . . . . . . . . . . . . . . . . 3/4" NPT ports, 0-30 GPM. 99 1241025 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . .

119 119

• Flow can be completely shut off or wide open • Output flow is smooth and constant regardless of pressure changes on the “controlled flow” line • Both outlets are pressure compensated • Max. continuous pressure: 3,000 PSI • O’all dim.: 4-5/8" x 4-1/2" x 1-7/8" 1/2" NPT ports, 0-16 GPM. 99 1240985 – Wt. 7.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 3/4" NPT ports, 0-30 GPM. 99 1240977 – Wt. 7.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99 99

PRIORITY TYPE ADJUSTABLE FLOW CONTROLS • Designed for applications where two separate hydraulic power circuits are to be served from a single pump • A constant regulated flow is maintained at the controlled flow port regardless of changes in load pressure or input pump flow, so long as input pump flow exceeds controlled-flow port demand • Excess flow can be used in a secondary circuit

• Max. continuous pressure: 3,600 PSI • Flow: 9 GPM cont., 12 GPM peak • #10 ORB inlet and excess flow outlet • #8 ORB priority flow port 99 1240028 – Wt. 2.7 lbs. . . . . . . . . . . .

139

• Max. continuous pressure: 3,600 PSI • Flow: 17 GPM cont., 24 GPM peak • #12 ORB inlet and excess flow outlet • #10 ORB priority flow port 99 1240029 – Wt. 3.7 lbs. . . . . . . . . . . .

169

• Max. continuous pressure: 3,500 PSI • Flow: 25 GPM cont., 30 GPM peak • Port size: #12 ORB • 12 positive detent position hand adjusting knob 99 1240670 – Wt. 7.6 lbs. . . . . . . . . .

Princess Auto offers on-going Hydraulic training schools for our Team Members conducted by a certified Mobile Hydraulic Technician.

199

ADJUSTABLE RELIEF VALVES • These relief valves are used to control the maximum pressure in the portion of the hydraulic system where they are installed • Protects components from overpressuring

A&B) RELIEF VALVE

• Designed to withstand system pressure up to 5,000 PSI • Relief cartridge is preset at 2,000 PSI and is adjustable from 150 to 3,500 PSI • Use to set maximum operating pressure by setting relief pressure approx. 300 PSI over system pressure • 2 port configurations available, type A and type B

A A A B B B

Model # Max. Ports Wt. GPM (ORB) (lbs.) CP20 5 6 1.2 CP40 10 8 1.5 CP80 20 10 3.1 CP/L 20 5 6 1.1 CP/L 40 10 8 1.7 CP/L 80 20 10 2.7

ITEM

PRICE

1240037 1240038 1240039 1240040 1240041 1240042

49.99 54.99 59.99 49.99 54.99 64.99

A B

C) RELIEF VALVE

• Up to 30 GPM flow and pressures from 700 to 3,000 PSI • Preset at 1,500 PSI. 3/4" NPT flow ports, 1/2" NPT spill port 1241587 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

AULI

HYDR

Y D R A U L I C S

13999

DIRECT ACTING SEQUENCE VALVES • Relief cartridge is preset at 2,000 PSI and is adjustable from 150 to 3,500 PSI • Use in a system to fully extend 1 cylinder before the next operation starts • #8 ORB ports

COUNTER BALANCE VALVES

• Controls maximum return flow to equal pump output • Prevents load induced acceleration and pump cavitation • This valve is used in many load lowering applications to control the rate of descent ie. truck boxes, tilt bed trailers or cranes. • Max. continuous pressure: 4,350 PSI • Peak pressure: 5,000 PSI • Relief pressure pre-set @ 3,200 PSI, adjustable from 1,450 PSI to 3,625 PSI

D D E

Continuous Peak Flow Ports Size Flow (GPM) (GPM) (ORB) 8 10 8 15 19 10 8 10 8

PRICE 89.99 D 1 - WAY V2

C1 C2

ITEM 1240060

Wt. (lbs.) 2.3

GPM 10

Model # VSQ/L/40

E 2 - WAY

Wt. ITEM PRICE (lbs.) 2.9 1240065 79.99 5.1 1240066 139.99 3.8 1240063 144.99

TECH TIPS How do you determine the gallon per minute of a pump or motor if all you know is the displacement? The calculation is displacement in cubic inches multiplies by speed in revolutions per minute. Then divide this figure by 231.

H Y D R A U L I C S

PILOT OPERATED CHECK VALVES

(LOCK VALVES)

• Require pressure from 1 work port to open the return line of the other work port • Holds the load in position, preventing creeping • Best used with motor spool to prevent initial bounce • Maximum continuous pressure: 4,350 PSI • Peak pressure: 5,000 PSI 2-WAY PILOT OPERATED CHECK VALVES

2-WAY V1

Designed to work in both directions. Model # Max. Ports Wt. ITEM GPM (ORB) (lbs.) A VBD/F6 5 6 1.6 1240046 A VBD/F8 8.75 8 1.5 1240047 A VBD/F10 12.5 10 2.5 1240048

PRICE 44.99 49.99 54.99

1-WAY PILOT OPERATED CHECK VALVES 1-WAY

Designed to work in 1 direction. Model # Max. Ports Wt. ITEM PRICE GPM (ORB) (lbs.) B VBS/F6 5 6 1.5 1240049 44.99 B VBS/F8 8.75 8 1.6 1240051 49.99

2-WAY PILOT OPERATED CHECK VALVE

• Max. continuous pressure: 3,000 PSI • Max. continuous flow: 25 GPM • 1/2" NPT ports • Designed to work in both directions 1240639 – Wt. 7.6 lbs. . . . . . . . . . . . . . . . . . . . . .

14999

CROSS OVER RELIEF VALVES (CUSHION VALVES) • Eliminates shock, surge and overload on hydraulic cylinders or motors • Max. continuous pressure: 4,350 PSI • Relief cartridges are preset at 2,000 PSI and are adjustable from 150 to 3,500 PSI V

Model # V1

Max. GPM 10 20

CP/DI/L/40 CP/DI/L/80

Ports (ORB) 8 10

Wt. (lbs.) 2.6 4.9

ITEM

PRICE

1240044 1240045

99.99 119.99

ADJUSTABLE LINE THROTTLE VALVES These simple and versatile little valves are an inexpensive way to restrict the flow of oil to various components in a hydraulic system. They are adjustable from 0 GPM to their maximum rated capacity in one direction and capable of full flow in the other direction. Use To: • Control cylinder stroke speed • Prevent pump cavitation by controlling cylinders or motors with inertia loads • Meter the flow to a hydraulic motor to control its speed Model # ST/UF8 ST/UF10

Min GPM 0 0

Max Max PSI Ports GPM (ORB) 7.5 4,350 8 11.25 4,350 10

Wt. (lbs.) 1.0 1.4

ITEM

PRICE

8006748 8006757

39.99 49.99

ITEM

PRICE

8003408 8003414

19.99 27.99

LINE CHECK VALVE • Permits oil flow in 1 direction only • Poppet style for less leakage than standard ball type Model # VNR/SP/F8 VNR/SP/F10

Max GPM 7.5 12.5

Max PSI 7,250 10,150

Ports (ORB) 8 10

Wt. (lbs.) 0.5 0.7

Unique fluid solutions powered by service.

HYDRAULIC HOSE BY THE FOOT 1-WIRE SAE 100 R1 AT

Size Working Min. bend pressure radius 1/4" 3,210 3.5" 3/8" 2,570 5.5" 1/2" 2,295 7" 3/4" 1,500 9.5" 1" 1,255 12"

Wt. (lbs.) 0.2 0.2 0.3 1.4 2.0

ITEM 1290210 1290213 1290215 1290217 1290209

PRICE (ft.) 1.29 1.49 1.69 2.49 3.49

0.1 0.3 0.3 1.4 2.0

1290211 1290214 1290216 1290218 1290219

1.59 1.99 2.19 3.29 4.99

1.6

8033068

6.99

2-WIRE SAE 100 R2 AT

1/4" 3/8" 1/2" 3/4" 1"

5,710 4,710 3,930 3,070 2,355

4" 5.5" 7" 9.5" 12"

4-WIRE SAE 100 R12 AT

3/4"

4,000

10"

• TOP QUALITY • RUBBER COVERED • HIGH TENSILE STRENGTH STEEL WIRE REINFORCING • TEMPERATURE RANGE: -40 to 100°C (-40 to 212°F) • Wire braiding allows the hose to retain flexibility and withstand high pressures and rough usage • Manufactured and tested to SAE 100R1 and SAE 100R2 specifications

CUSTOM BUILT HOSE ASSEMBLIES

CRIMP DIAMETER

• 7 DAYS A WEEK! • FREE CUTTING AND CRIMPING • Select a length of 1 or 2-wire hose from our selection ranging from 1/4" - 1" • Select the crimp fittings you need from our range of sizes and styles: NPT, JIC, ORB, ORFS, fixed or swivel, straight, 45° or 90°

Hose Size 1/4" 3/8" 1/2" 3/4" 1"

1-Wire 0.610" 0.748" 0.905" 1.100" 1.410"

Y D R A U L I C S

2-Wire 4-Wire 0.653" 0.810" 0.930" 1.160" 1.429" 1.470" -

NPT FITTINGS RIGID MALE

Hose I.D. 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 1"

End Size 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1"

Wt. (lbs.) 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.3 0.4 0.7

SWIVEL MALE

ITEM 1290240 1290241 1290242 1290243 1290244 1290245 1290247 1290248 1290249 1290251 1290252

PRICE 3.49 3.49 3.79 8.49 3.69 3.79 4.59 4.29 4.29 7.39 12.69

RIGID FEMALE

Hose I.D. End Size 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4"

Wt. (lbs.) 0.1 0.2 0.3 0.3

Wt. (lbs.) – 0.2 0.2 – – 0.2 0.3 – 0.3 0.5 1.0

ITEM – 1290255 1290256 – – 1290257 1290258 – 1290259 1290260 1290262

PRICE – 6.39 6.89 – – 6.89 7.99 – 7.39 12.69 20.99

SWIVEL FEMALE

ITEM PRICE 1290266 4.29 1290267 4.79 1290268 5.89 8006624 12.69

TECH TIPS

Wt. (lbs.) 0.1 0.2 0.3 0.3

ITEM PRICE 1290263 4.79 1290264 5.29 1290265 6.39 8006627 13.79

Do NPT fittings work well in high-pressure applications? While NPT fittings will work in high-pressure applications they are not the best choice. These fittings are prone to loosening and/or cracking when there is temperature cycling in the system and because the threads are tapered, repeated assembly and disassembly can cause the threads to distort, leading to leakage. Fittings that work better for high-pressure sealing are ORB or JIC.

H Y D R A U L I C S

HYDRAULIC HOSE CRIMP FITTINGS

Manufactured and tested to SAE 100R1 and SAE 100R2 specifications.

O-RING BOSS MALE FITTINGS Hose I.D. 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

End Size #6 #6 #8 #8 #10 #12

RIGID

SWIVEL

Wt. (lbs.) 0.1 0.2 0.2 0.3 0.3 0.4

ITEM PRICE Wt. (lbs.) 1290270 4.79 1290272 4.79 0.2 1290273 5.29 0.3 1290274 5.89 0.4 1290275 6.39 0.4 1290361 11.69 –

90° SWIVEL

ITEM PRICE 1290281 7.99 1290282 8.49 1290283 8.99 1290284 9.49 – –

Wt. (lbs.) 0.3 0.3 0.4 0.5 0.5 –

ITEM PRICE 1290365 12.19 1290366 12.19 1290367 12.19 1290358 12.69 1290359 13.29 – –

O-RING FACE SEAL FITTINGS Hose I.D. 1/4" 3/8" 1/2" 3/4"

RIGID MALE

End Size #4 #6 #8 #12

Wt. (lbs.) 0.1 0.2 0.2 -

SWIVEL FEMALE

PRICE 5.89 6.89 7.99 -

ITEM 8046615 8046624 8046633 -

Wt. (lbs.) 0.1 0.2 0.4 0.5

ITEM 8046642 8046651 8046660 8046679

PRICE 6.39 7.39 8.49 13.79

ITEM 1290294 1290297 1290298 1290299 1290300 1290301 1290369 1290302 1290305

PRICE 4.19 4.29 4.69 5.19 5.99 7.09 8.99 9.99 16.99

8032899

12.99

JIC FITTINGS Hose I.D. 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 1"

SWIVEL FEMALE

Wt. (lbs.) 0.3 0.2 0.2 0.2 0.2 0.3 0.4 0.4 0.8

ITEM 1290285 1290362 1290288 1290289 1290290 1290291 1290371 1290292 1290293

PRICE 3.79 4.29 4.29 4.29 5.09 6.19 7.99 8.49 13.29

8032906

11.99

RIGID MALE

4-WIRE

3/4"

RIGID MALE

End Size 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 1"

3/4"

0.5

Wt. (lbs.) 0.1 0.2 0.2 0.2 0.3 0.3 0.4 0.5 0.8 SWIVEL FEMALE

0.5

JIC FEMALE ELBOWS Hose I.D. 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

End Size 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4"

90° SWIVEL

Wt. (lbs.) 0.1 0.2 0.2 0.3 0.3 0.5 0.7

45° SWIVEL

ITEM 1290307 1290308 1290309 1290310 1290312 1290313 1290314

90° LONG SWIVEL

PRICE Wt. (lbs.) ITEM PRICE 10.59 10.59 10.59 12.19 13.29 0.3 1290320 12.69 17.99 0.4 1290321 17.99 24.99 0.6 1290322 25.99

Wt.(lbs.) – 0.2 – 0.4 – 0.8

ITEM – 1290325 – 1290326 – 1290327

PRICE – 10.59 – 12.69 – 26.49

FLARELESS COMPRESSION FITTINGS

Hose I.D. 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 1"

Tubing Size 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

Wt. (lbs.) 0.1 0.1 0.2 0.3 0.3 0.6 0.9

ITEM 8006643 8006644 8006645 8006646 8006648 8006649 8006650

PRICE 6.89 7.49 7.49 8.49 10.59 15.99 21.99

NO CRIMP HOSE FITTINGS A

Designed for in-field installation. A) SWIVEL

Hose I.D. 1/4" 3/8" 1/2" 3/4"

For 1-wire thin cover (up to 3,000 PSI) For 2-wire thin cover (up to 5,000 PSI)

End size (female JIC) 1/4" 3/8" 1/2" 3/4"

B) FIXED

Hose I.D. 1/4" 3/8" 1/2"

ITEM 1294891 1294909 1294917 1294925

PRICE 6.59 6.59 8.99 19.99

ITEM 1294941 1294958 1294966 1294974

PRICE 6.19 6.39 8.79 16.99

For 1-wire thin cover (up to 3,000 PSI) For 2-wire thin cover (up to 5,000 PSI)

End size (male NPT) 1/4" 3/8" 1/2"

ITEM 1291442 1291509 1291517

PRICE 5.99 6.59 7.49

ITEM 1291541 1291558 1291574

PRICE 5.99 6.59 7.49

READY-MADE HYDRAULIC HOSE Princess Auto also offers hydraulic hose crimping with a wide variety of fittings to fit many applications.

• We carry many sizes of complete hose assemblies for your convenience. If we don’t have what you require, let us know and we’ll custom make exactly what you need. • All hose is 2 wire 1/4" NPT Rigid Fittings x 1/4" hose 5,000 PSI Length Wt. (lbs.) ITEM PRICE 2 ft. 0.7 1290287 7.99 3 ft. 0.9 1290295 9.99 4 ft. 1.2 1290303 11.99 6 ft. 1.9 1290329 15.99 8 ft. 2.4 1290345 19.99

1/2" NPT Rigid Fittings x 1/2" hose 3,500 PSI Length Wt. (lbs.) ITEM PRICE 2 ft. 1.3 1290840 10.99 3 ft. 1.6 1290857 12.99 4 ft. 2.3 1290865 14.99 6 ft. 2.8 1290881 18.99 8 ft. 2.6 1290907 22.99 10 ft. 4.3 1290923 26.99

3/8" NPT Rigid Fittings x 3/8" hose 4,000 PSI Length Wt. (lbs.) ITEM PRICE 2 ft. 1.0 1290568 8.99 3 ft. 1.4 1290576 10.99 4 ft. 1.6 1290584 12.99 6 ft. 2.4 1290600 16.99 8 ft. 3.0 1290626 20.99

1/2" JIC Swivel Fittings x 1/2" hose 3,500 PSI Length Wt. (lbs.) ITEM PRICE 2 ft. 1.3 8007250 14.99 3 ft. 1.6 8007251 15.99 4 ft. 2.3 8007252 17.99 6 ft. 2.8 8007259 22.99 8 ft. 3.3 8007260 26.99

H Y D R A U L I C S

HYDRAULIC OIL C) MULTIGRADE HYDRAULIC OIL

• All-season hydraulic oil is designed for hydraulic systems which operate in a wide range of temperatures • Ideal for logsplitters and other all season equipment • Not suitable for hydrostatic tractor systems. 8020027 - 4 litre – Wt. 8.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6460059 - 10 litre – Wt. 19.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999 2299

D) TGH HYDRAULIC OIL

• A multi-purpose, extreme pressure, tractor transmission/hydraulic fluid • Recommended for transmissions, differentials, final drives, hydraulic and power steering systems, as well as wet brakes, PTO and hydrostatic drives. 99 8019949 - 10 litre – Wt. 20.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E) ANTI-WEAR HYDRAULIC OIL

• Recommended for high pressure mobile and industrial hydraulic systems where anti-wear hydraulic fluids are specified • Also provides excellent performance in machine tools, servo controls, metal working equipment and air compressor applications • Not suitable for hydrostatic tractor systems. ISO Rating Pour Point 22 32 68* §

-34°C -32°C -29°C

ITEM 8004474 6460034 6460002

Qty. (litre) Wt. (lbs.) 20.0 20.0 20.0

40.8 39.8 39.9

PRICE 33.99 33.99 33.99

E * For use in higher temperature applications. § Only available during winter months Oil cannot be shipped.

H Y D R A U L I C S

PAL Hydraulics offers a variety of sizes and styles of hydraulic fittings to complete your installation or project. Size range: 1/8" to 1-1/4". • NPT (National Pipe Thread) – Tapered thread, sealant is required for good seal • ORB (O-Ring Boss) – O-ring seals against a machined seat in port • JIC (37° Flare) – Flare seats against opposite flare in port

Three Thread Types Are:

NPT BASIC FITTINGS

Thread size 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT

TEE

ITEM PRICE ITEM PRICE 8058727 5.69 8058754 4.69 8058736 7.19 1293018 5.49 8058745 10.99 1293026 8.69 1290066 14.99 8058763 13.99

90° ELBOW

Thread size 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT

ITEM 8059110 8059129 1291806 1291822

90° ELBOW

ITEM PRICE 8058692 4.29 8058709 6.29 8058718 9.29 8058488 14.49

NIPPLE

PRICE 3.29 4.79 5.49 8.29

ITEM 8058102 1291715 8058111 8059101

90° ELBOW

PRICE 3.69 4.49 6.89 10.99

ITEM 1292788 1292796 1292804 1292812

ITEM 8058549 8058567 8058647 8058656

COUPLER

PRICE 0.99 1.49 1.99 2.89

ITEM 8058219 8058237 8058308 1292770

PRICE 3.69 4.29 6.29 9.29

PLUG

PRICE 2.19 2.69 3.59 4.99

ITEM 8059058 8059067 1291624 1291632

PRICE 0.99 1.29 1.59 2.49

NPT BASIC SWIVEL FITTINGS 90° ELBOW

Thread size 1/4" NPT 3/8" NPT 1/2" NPT

ITEM 8058772

PRICE 6.29

COUPLER

Thread size 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT

45° ELBOW

TEE

ITEM 1292218 1292226 1292242

PRICE ITEM PRICE 4.69 8059156 7.29 5.29 1293166 7.99 5.99 1293174 9.49

COUPLER

ITEM PRICE ITEM PRICE 1291871 1.89 – – 1291889 1.99 1292036 2.49 1291913 2.59 1292044 2.99 1291947 3.69 1292077 3.79 1291962 5.19 8058530 5.59 1291970 8.29 – –

BUSHINGS MALE X FEMALE

90° ELBOW

ITEM 1290062 1292101 8058120 1292150 1292184 1292192

PRICE 2.99 3.49 5.29 5.69 9.29 15.99

Thread size (NPT) 1/4" x 1/8" 3/8" x 1/4" 3/8" x 1/8" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 3/8" 3/4" x 1/2" 1" x 1/2" 1" x 3/4"

ITEM PRICE 1294701 1.19 1294727 1.29 8058843 1.49 1294735 1.69 1294743 1.79 1294750 2.69 8058317 3.59 8058852 4.19 1294776 4.19

NPT SIZE ADAPTERS

Thread size

90° ELBOW

1/4" x 1/8" NPT 3/8" x 1/4" NPT 1/2" x 3/8" NPT 3/4" x 1/2" NPT 1" x 3/4" NPT

ITEM – 1291772 1291798 1291814 –

NIPPLE

PRICE – 4.69 5.79 8.49 –

COUPLER

ITEM PRICE ITEM PRICE 8059076 1.69 8058665 3.69 8059085 1.89 8058683 3.79 1291723 2.19 1292747 5.19 8059094 3.49 1292762 6.79 – – – –

(F X M) REDUCERS

ITEM 1291830 1291863 1292002 1292028 8057979

PRICE 2.39 3.49 4.49 6.29 12.99

NPT SWIVEL SIZE ADAPTERS

MALE x FEMALE

COUPLERS

Thread size 1/4" x 1/8" 1/4" x 3/8" 3/8" x 1/4" 3/8" x 1/2" 1/2" x 3/8" 1/2" x 3/4" 3/4" x 1/2"

ITEM 1294099 1291897 8058503 8058521 1291939 1291954 1294107

90° ELBOW

PRICE 2.19 2.59 2.79 3.69 4.19 5.19 6.39

ITEM – 1292119 1290065 8059138 1292143 1292168 1292176

O-RING BOSS SIZING CHART

PRICE – 4.89 4.89 5.69 5.69 9.99 9.99

ORB Thread dia. Fitting Threads/in #4 7/16" 1/4" 20 #5 1/2" 5/16" 20 #6 9/16" 3/8" 18 #8 3/4" 1/2" 16 #10 7/8" 5/8" 14 #12 1-1/16" 3/4" 12 #14 1-3/16" 7/8" 12 #16 1-5/16" 1" 12 #20 1-5/8" 1-1/4" 12

O-RING BOSS SIZE ADAPTERS

O-RING BOSS BASIC FITTINGS

MALE x FEMALE PLUGS

Thread size #4 ORB #5 ORB #6 ORB #8 ORB #10 ORB #12 ORB

Wt. (lbs.) 0.2 0.1 0.1 0.1 0.2 0.2

ITEM 8059165 8059174 1291491 8058095 8059049 1291319

PRICE 1.39 1.59 1.69 1.99 2.49 3.49

Wt. (lbs.) Thread size #6 ORB x #4 ORB 0.1 #6 ORB x #8 ORB 0.1 #8 ORB x #10 ORB 0.2 #10 ORB x #8 ORB 0.2 #12 ORB x #8 ORB 0.2 #12 ORB x #10 ORB 0.3 #16 ORB x #12 ORB 0.5 #20 ORB x #16 ORB 0.3

JIC BASIC FITTINGS

PLUG

Thread size 1/4" JIC 5/16" JIC 3/8" JIC 1/2" JIC 5/8" JIC 3/4" JIC 1" JIC

ITEM 8058861 8017861 8017870 8058870 8058889 8058898 8058905 8058914

PRICE 5.99 7.99 7.99 7.99 7.99 8.99 9.99 19.99

Y D R A U L I C S

JIC 37° TUBE SIZING CHART CAP

ITEM PRICE ITEM 8059183 0.99 1293844 8059192 1.69 1293851 1293612 1.79 1293869 1293653 1.89 1293877 8059209 2.19 1293885 1293778 2.79 1293893 1293836 4.29 1293901

UNION

PRICE 1.19 1.29 0.99 1.49 1.99 2.39 4.29

ITEM PRICE – – 1293927 1.49 1293935 1.59 1293943 2.29 1293968 2.59 1293976 3.49 – –

JIC Thread dia. Threads /in. 1/4" 7/16" 20 3/8" 9/16" 18 1/2" 3/4" 16 5/8" 7/8" 14 3/4" 1-1/16" 12 1" 1-5/16" 12

THREAD TYPE ADAPTERS O-RING BOSS x NPT ADAPTERS Thread size #6 ORB x 1/4" NPT #6 ORB x 3/8" NPT #6 ORB x 1/2" NPT #8 ORB x 3/8" NPT #8 ORB x 1/2" NPT #10 ORB x 1/2" NPT #12 ORB x 3/4" NPT #16 ORB x 1" NPT #20 ORB x 1-1/4" NPT

MALE x MALE

FEMALE x MALE

ITEM PRICE ITEM PRICE 1293299 3.39 8017692 6.99 8058781 3.39 8017745 6.99 – – 8017754 7.99 1293315 3.69 8017763 7.99 1293323 3.69 8017772 7.99 1293331 4.99 8017781 7.99 1293513 6.99 8017807 12.99 8059012 9.99 – – 1290227 14.99 – –

CYLINDER PORT CONVERTERS MALE x FEMALE

Thread size #6 ORB x 1/4" NPT #6 ORB x 3/8" NPT #8 ORB x 3/8" NPT #8 ORB x 1/2" NPT #10 ORB x 1/2" NPT #10 ORB x 3/4" NPT #12 ORB x 1/2" NPT

ITEM 8059021 1290347 1290348 1290349 1290350 8059030 1290353

PRICE 2.49 2.99 3.49 3.69 4.29 5.99 6.99

H Y D R A U L I C S

THREAD TYPE ADAPTERS

MEMBER OF

JIC 37° TUBE x NPT ADAPTERS MALE x MALE

90° ELBOW

Thread Size 1/4" JIC x 1/4" NPT 5/16" JIC x 1/4" NPT 3/8" JIC x 1/4" NPT 3/8" JIC x 3/8" NPT 3/8" JIC x 1/2" NPT 1/2" JIC x 1/2" NPT 5/8" JIC x 1/2" NPT 3/4" JIC x 3/4" NPT 1" JIC x 1" NPT

ITEM 1294990 – 8032345 1295013 8058834 1295021 1295039 1295054 –

COUPLERS

PRICE 2.89 – 3.79 3.99 4.69 4.89 5.69 7.99 –

ITEM 1293422 1293430 – 1293448 1294024 1293455 8058807 1293489 8058816

PRICE 1.49 1.89 – 1.99 2.19 2.59 3.19 3.59 5.19

JIC 37° TUBE x O-RING BOSS ADAPTERS A

MALE x MALE

A) COUPLER

Thread size 1/4" JIC x #4 ORB 3/8" JIC x #6 ORB 3/8" JIC x #8 ORB 3/8" JIC x #10 ORB 1/2" JIC x #6 ORB 1/2" JIC x #8 ORB 1/2" JIC x #10 ORB 1/2" JIC x #12 ORB 5/8" JIC x #10 ORB 5/8" JIC x #12 ORB 3/4" JIC x #12 ORB

ITEM 1294792 1294800 8006363 8006366 8006362 1294818 8045340 8006367 1294826 8006368 1294834

B) 90° ELBOW

PRICE 1.29 1.49 1.59 2.69 1.69 1.79 2.69 3.79 2.69 4.29 4.29

ITEM – 1294859 – – 8006378 1294867 8006370 – 1294875 – –

C) LONG ELBOW

PRICE – 4.69 – – 4.79 5.99 6.49 – 8.29 – –

ITEM – 8000727 – – – 8000704 – – 8000702 – –

PRICE – 8.99 – – – 11.99 – – 15.99 – –

SWIVEL THREAD TYPE ADAPTERS NPT x JIC 37° TUBE SWIVEL ADAPTERS

O-RING BOSS x NPT SWIVEL ADAPTERS MALE x FEMALE COUPLERS

Thread Size #4 ORB x 1/4" NPT #5 ORB x 1/4" NPT #6 ORB x 1/4" NPT #6 ORB x 3/8" NPT #6 ORB x 1/2" NPT #8 ORB x 1/4" NPT #8 ORB x 3/8" NPT #8 ORB x 1/2" NPT #10 ORB x 3/8" NPT #10 ORB x 1/2" NPT #10 ORB x 3/4" NPT #12 ORB x 3/4" NPT #16 ORB x 1" NPT

ITEM 1292291 8059218 1292309 1292317 8001420 8058996 1292325 1292333 1292341 1290006 1292358 1294412 1295310

90° ELBOW

PRICE 3.19 5.69 3.49 3.69 6.99 4.29 4.69 3.89 4.89 4.99 6.79 6.99 10.99

ITEM – – 8032791 8058139 8001418 – 1292424 1292432 8059147 1292457 – 8000705 8059003

PRICE – – 6.79 6.79 8.99 – 8.49 8.49 8.99 9.29 – 14.99 17.99

TEFLON TAPE

Seals all threaded valve and pipe joints. Stands pressures up to 10,000 PSI.

Size ITEM PRICE 1/2" x 16 ft. 1250086 0.39 1/2" x 40 ft. 1250620 0.99 3/4" x 32 ft. 1250087 1.29 1" x 65 ft. 1250088 1.99 10 per package. 99 1253285 – 1/2" x 40 ft . . . . . . . /pkg.

MALE x FEMALE

Thread Size 1/4" NPT x 1/4" JIC 1/4" NPT x 3/8" JIC 3/8" NPT x 3/8" JIC 3/8" NPT x 1/2" JIC 1/2" NPT x 1/2" JIC 1/2" NPT x 5/8" JIC 1/2" NPT x 3/4" JIC 3/4" NPT x 3/4" JIC

ITEM PRICE 8058335 4.69 8058344 5.69 8058380 5.69 8058399 7.29 8058406 5.99 8058442 7.69 1290031 17.99 8058460 14.99

O-RING BOSS x JIC 37° TUBE SWIVEL ADAPTERS Thread Size #4 ORB x 1/4" JIC #6 ORB x 3/8" JIC #8 ORB x 1/2" JIC #10 ORB x 5/8" JIC #12 ORB x 3/4" JIC

ITEM PRICE 1290016 6.59 1290017 6.59 1290019 7.49 1290020 9.49 1290021 11.99

QUICK COUPLERS

H E

D F B

D) PIONEER 1-HAND QUICK COUPLER

• Push to connect, pull to separate (under pressure conditions) • 1/2" NPT male and female • Max. pressure: 3,000 PSI, max. flow: 12 GPM 99 8003337 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E) PIONEER FEMALE x JOHN DEERE MALE ADAPTER

#4060-4MB. Fits 1/2" Pioneer male coupler. 8003528 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2199

F) REPLACEMENT SEALS FOR 1/2" COUPLER BODIES

Nitrile composition. 8003339 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A) PIONEER QUICK COUPLERS

• Connects and disconnects quickly creating a positive seal • Max. pressure: 3,000 PSI Size 1/4" 3/8" 1/2" 3/4"

Max. Flow 3 GPM 6 GPM 12 GPM 28 GPM

Wt. (lbs.) 0.4 0.7 0.8 1.0

ITEM PRICE 8003325 8003332 8003336 8006623

21.99 21.99 21.99 24.99

DNP QUICK COUPLERS

Size

For use with quick couplings. Size Max. Flow Wt. (lbs.) ITEM PRICE 1/4" 3 GPM 0.1 8003296 6.69 3/8" 6 GPM 0.2 8003299 6.69 1/2" 12 GPM 0.2 8003300 6.69 C) DOUBLE BREAKAWAY CLAMP

• For 1/2" or 3/4" quick couplings • Prevents hose breakage by automatically uncoupling lines when implement is disconnected accidentally 99 1293224 – Wt. 0.8 lbs. . . . . . . . . . . . . . .

QUICK COUPLER DUST CAPS AND PLUGS J Dust cap for coupler tip

STANDARD STYLE I I I J J J

Size 1/4" 3/8" 1/2" 1/4" 3/8" 1/2"

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1

ITEM 8029395 8029493 8029545 8029607 8029616 8029634

PRICE 1.99 1.99 1.99 1.99 1.99 1.99

ITEM 8029554 8029581 8029643 8029652

PRICE 1.99 1.99 1.99 1.99

FLAT FACE STYLE

Size I 1/4" I 1/2" J 1/4" J 1/2"

Wt. (lbs.) 0.1 0.1 0.1 0.1

• All parts are zinc plated and yellow bichromated • Interchangeable with Pioneer • Working temp.: -25°C to 125°C

B) PIONEER MALE TIPS ONLY

I Dust plug for coupler body

669

G G G G H H H H

1/4" plug 3/8" plug 1/2" plug 3/4" plug 1/4" body 3/8" body 1/2" body 3/4" body

Y D R A U L I C S

Max. GPM @ Wt. pressure 15 PSI (lbs.) (PSI) (∆P) 3,500 2.0 0.1 3,500 7.0 0.2 3,000 11.0 0.2 2,500 20.0 0.5 3,500 2.0 0.3 3,500 7.0 0.5 3,000 11.0 0.6 2,500 20.0 1.1

ITEM

PRICE

1290075 1290077 1290079 1290208 1290076 1290078 1290080 1290207

4.99 4.99 5.49 9.99 8.49 10.99 11.99 22.99

FLAT FACE HYDRAULIC QUICK COUPLERS L

• Used extensively in skid steer loader market • Less pressure drop through coupler assembly • Flat face design for minimal spillage during connection and disconnection • Female body does not have recessed cavity, thus dirt, debris, and oil do not get trapped • All steel parts are zinc plated and yellow bichromated • Working temperature: -25° to 125°C (-13 to 257°F) Size K K K L L L

1/4" plug 1/2" plug 3/4" plug 1/4" body 1/2" body 3/4" body

Max. GPM pressure @15 PSI (PSI) (∆P) 4,500 4.0 4,000 9.0 3,500 14.0 4,500 4.0 4,000 9.0 3,500 14.0

Wt. (lbs.)

ITEM

PRICE

0.2 0.3 0.6 0.3 0.6 1.0

1290082 1290088 1290086 1290081 1290087 1290085

13.99 13.99 24.99 26.99 29.99 49.99

OIL RESERVOIRS

H Y D R A U L I C S

A) RESERVOIRS

• 12-gauge steel construction • Sturdy, general purpose hydraulic oil reservoirs cleaned and tested for leak-free performance • Comes clean with sealed ports and drilled mounting holes Capacity (Gal.) 3 5 10

Ports (NPT) In x Out 1-1/4" x 3/4" 1-1/4" x 1-1/4" 1-1/4" x 1-1/4"

O’all dim. HxLxW 9" x 14-1/2" x 12" 11" x 18-1/2" x 12" 14-1/2" x 18-1/2" x 16"

Wt. (lbs.)

ITEM

PRICE

18.8 25.7 38.4

1250040 1250041 1250043

99.99 119.99 139.99

A) 10 GALLON RESERVOIR WITH BAFFLE

• 12-gauge steel construction • Interior baffle between suction and discharge sides of tank • Interior coated with rust preventative oil • 4 ports – two 1-1/4" NPT inlet/outlet ports – one 3/4" NPT bottom drain port – one 3/8" NPT port for pumps or motors that have a case drain • O’all dim.: 16"h x 14-1/2"l x 18-1/2"w 99 1250113 – Wt. 44.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

169

B) RESERVOIRS WITH BAFFLE

• 12-gauge steel construction • Interior baffle between suction and discharge sides of tank • 1/4 turn chrome breather/filler cap with 15 micron strainer basket • Temperature/level gauge • Interior coated with rust preventative oil • 5 ports – two 2" NPT suction ports – one 1-1/4" NPT top mounted return port with steel down tube to prevent aeration – one 3/8" NPT port for pumps that have a case drain – one 3/4" NPT bottom drain port Capacity O’all dim. Wt. (Gal.) HxLxW (lbs.) 15 imp. 21" x 18-1/2" x 17" 66.0 25 imp. 21" x 26-1/2" x 17" 61.5

RESERVOIRS

ITEM

PRICE

1250096 1250097

229.99 329.99

OIL TEMPERATURE/ LEVEL GAUGE

5 GALLON

• Inlet/outlet ports: 1-1/4" NPT • O’all dimensions: 10.2" H x 19.5" L x 13.2" W 1250106 –Wt. 25.7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999

10 GALLON

• Inlet/outlet ports: 1-1/4" NPT • O’all dimensions: 10.5" H x 18.5" L x 16" W 8001466 –Wt. 38.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11999

• Heavy cast aluminum body • 1/2" hollow bolts for mounting • Temperature range: 27° to 109°C (80° to 225°F) • Mounts on the side of hydraulic reservoir tank 99 1250028 – Wt. 0.7 lbs. . . . . .

CUSTOM BUILT STORAGE TANK with BAFFLE

Delivery in 15 working days (For a maximum order of 5 pieces). Special quotes can be provided for orders of 10 pieces or more!

FEATURES:

• Can be built to any dimensions to fit most applications • Over 50 possible port positions and 8 different port sizes • Heavy 12-gauge steel construction • Interior baffle plate • Optional features include an oil temperature/level gauge and filler/strainer breather cap assembly • Painted black and treated internally with a rust preventative oil

Y D R A U L I C S

For more information contact your local store, our National Call Centre at 1-800-665-8685, or Gary at 1-204-654-5209.

MAGNETIC PLUGS • Square head design • Used to protect hydraulic systems by magnetically collecting ferrous particles Size (NPT)

Wt. (lbs.)

ITEM

PRICE

3/8" 1/2" 3/4"

0.1 0.1 0.2

1293661 1293679 1293687

1.59 1.59 2.09

FILLER/STRAINER BREATHER CAP ASSEMBLY

STAMPED STEEL PORT FLANGES

• These port flanges make quick and easy work of adding a threaded port to a reservoir • Just cut pilot hole in tank and weld on threaded port flange Size (NPT) 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

Wt. (lbs.) 0.1 0.2 0.1 0.2 0.3 0.3

ITEM 1290230 1290231 1290232 1290233 1290234 1290235

PRICE 1.99 2.99 3.29 3.49 3.99 3.99

• 40 micron chrome filler/breather cap is attached with a chain and can be taken off by twisting a 1/4 turn • 15 micron strainer basket catches debris while filling • Comes with mounting flange with 2 gaskets and 6 self-tapping screws 99 1250101 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TECH TIPS

How do I determine the proper size for the reservoir of my hydraulic system? The reservoir should be 2 times the maximum pump output of a system that is used continuously. i.e. A 5 G.P.M. pump requires a 10 gallon reservoir. On other systems the size will depend on duty cycle

HYDRAULIC FILTERS

H Y D R A U L I C S

These filters can also be used for diesel fuel and gasoline

• Dirt is the number one killer of hydraulic components • Microscopic dirt particles can score valves, seize pumps and damage cylinders resulting in expensive repairs • Hydraulic filters are a cheap way to protect all your hydraulic components • Choose a filter that is large enough to handle 1-1/2 times the system flow

3/4" INLINE FILTER HEAD

• Max. cont. pressure: 200 PSI • Max. cont. flow: 15 GPM (return) 5 GPM (suction) • Two 1/8" NPT gauge ports 99 8006258 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A B A A

Media Type Filter Rating Length Wt. (lbs.) Cellulose 10 micron 5.21" 1.3 Cellulose (long) 10 micron 8.6" 1.2 Cellulose 25 micron 5.21" 1.1 Cellulose 25 micron 5.21" 1.2 (Water absorbing) Wire Mesh 150 micron 5.76" 1.2

Item Price 8038651 6.99 8038660 11.99 8038679 6.99 8038688 11.99 8038697 21.99

Media Filter Rating Efficiency Length Wt. Item Price Type Beta(x)=2/20/75 Rating (lbs.) C Synteq 2/7/10 micron 50/95/98.6% 7.87" 1.8 8038642 34.99

1-1/4" INLINE FILTER HEADS

• Max. cont. pressure: 150 PSI • Max. cont. flow: 45 GPM (return) 12 GPM (suction) • Four 1/8" NPT gauge ports 99 8006267 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Media Type Filter Rating D Cellulose 10 micron D Cellulose 25 micron D Wire Mesh 150 micron E

Length 6.85" 6.85" 6.63"

Wt. (lbs.) 2.4 4.0 2.5

Item 8038704 8038713 8038722

Price 16.99 16.99 44.99

Media Filter Rating Efficiency Length Wt. ITEM PRICE Type Beta(x)=2/20/75 Rating (lbs.) 2/7/10 micron 50/95/98.6% 6.7" 2.9 8040728 44.99

E Synteq

FOR YOUR INFORMATION Contamination of hydraulic fluid causes over 75% of all system component failures. By ensuring you have the proper filteration for your application, down time and costly repairs can be avoided.

0-30 PSI FILTER GAUGE - 1/8" NPT*

Can be used with either of the above filter heads to indicate when the filter elements need replacement. (Return line only.) 99 8040041 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

GLYCERINE FILLED PRESSURE GAUGES • Provides longer life and reduces erratic needle movement • Scale shows PSI and Bar • Designed for rugged heavy service Mount Thread Face Pressure Range Wt. ITEM PRICE type (NPT) Dia. PSI (lbs.) F Vert. 1/4" 2-1/2" 0-2,000 0.5 8000833 12.99 F Vert. 1/4" 2-1/2" 0-3,500 0.5 8000842 13.99 F Vert. 1/4" 2-1/2" 0-5,000 0.5 8000851 14.99 F Vert. 1/4" 2-1/2" 0-7,000 0.5 8000860 15.99 G Horiz. 1/4" 2-1/2" 0-2,000 0.6 8000879 16.99 G Horiz. 1/4" 2-1/2" 0-3,500 0.6 8000888 17.99 G Horiz. 1/4" 2-1/2" 0-5,000 0.3 8000897 18.99 G G Horiz. 1/4" 2-1/2" 0-7,000 0.6 8000904 19.99 *For accurate filter monitioring mount the return line filter as close to the reservoir as possible. F

SUCTION HOSE • Use to connect your hydraulic pump to your reservoir • Can also be used for other petroleum based applications • Resistant to vacuum induced collapse which can result in pump cavitation • 2 styles available • The hose cover is made of abrasion and weather resistant neoprene rubber • Reinforced with four spirals of high-tensile yarn • Temperature range: -40C (-40F) to 95C (203F) • Not to be used for suctioning applications over 6 ft.

SUCTION and RETURN LINE STRAINERS A

Hose Hose I.D. O.D.

Max. Max. Wt. ITEM PRICE/ft. Continuous Flow (lbs.) Pressure (PSI) (GPM) 3/4" 1.16" 250 7 0.2 8017996 2.99 1" 1.44" 250 12 0.5 8018030 3.99 1-1/4" 1.78" 250 19 7.4 8018076 6.99

• Prevent fine particles from entering and damaging the hydraulic pump or system • Made with #100 mesh stainless steel wire cloth elements, in pleated construction • Equipped with a bypass relief valve

• The hose cover is a neoprene rubber with a black wrapped finish that is abrasion and weather resistant • Reinforced with a heavy wire helix embedded between layers of synthetic textile cords • Temperature range: -40°C (-40°F) to 110°C (230°F) Hose Hose Max. Max. Wt. ITEM PRICE/ft I.D. O.D. Continuous Flow (lbs.) Pressure (PSI) (GPM) 1-1/2" 1.97" 150 27 3.8 8017987 7.99

(A) SUCTION TYPE 10 GPM RATING • 6.8" length with 70 sq. in. screen area • 1-1/4" NPT tank mounting • 3/4" NPT line connection 99 1251602 – Wt. 0.7 lbs. . . . . . . . . . . . .

T-BOLT HOSE CLAMPS

(B) SUCTION TYPE 25 GPM RATING • 9" length with 125 sq. in. screen area • 2" NPT tank mounting • 1-1/4" NPT line connection 99 1251610 – Wt. 1.0 lbs. . . . . . . . . . . . .

• Stainless steel band and bridge, plated steel bolt, trunnion and nut • Provides dynamic sealing to suction hoses preventing air and other contaminants from entering the system • Prevents the leakage of fluid from pressure hoses • Improved sealing compared to standard screw clamps Hose I.D. 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/4"

Range 1.14"-1.22" 1.31"-1.56" 1.56"-1.81" 1.81"-2.06" 2.06"-2.31" 2.56"-2.87"

Wt. (lbs) 0.1 0.1 0.1 0.1 0.1 0.2

ITEM 8023925 8016951 8016997 8017004 8017013 8017040

C D D D D

Hose I.D. 1" 3/4" 1" 1-1/4" 1-1/2"

Fitting size #16 ORB #3/4" NPT #1" NPT #1-1/4" NPT #1-1/2" NPT

Y D R A U L I C S

(A) SUCTION TYPE 15 GPM RATING • 8" length with 70 sq. in. screen area • 1-1/2" NPT tank mounting • 1" NPT line connection 99 1250095 – Wt. 0.8 lbs. . . . . . . . . . . . .

29 32

BREATHERS PRICE 3.99 5.99 5.99 6.49 6.49 6.99

STEEL HOSE BARBS Steel construction to prevent oil contamination and provide superior fitting strength

Breather filters are a must for hydraulic systems ensuring clean air passing into the reservoir thus prolonging the life of the systems components. E) 40 MICRON RATED FILTER

10 CFM airflow capacity. C Wt (lbs.) 0.5 0.8 0.8 0.9 1.1

D ITEM 8023943 8023952 8023961 8023989 8023998

PRICE 19.99 3.99 7.99 17.99 24.99

Port size Wt. (lbs.) 3/8" NPT 0.2 1/2" NPT 0.3 3/4" NPT 0.6 1" NPT 0.7

ITEM 1250090 1250092 1250093 1250094

PRICE 8.99 12.99 15.99 21.99

F) SLIP-ON BREATHER CAP

Fits 1-1/2" O.D. pipe. 1252923 – Wt. 0.1 lbs. . . . . . . . . . . . . . . .

699

TECH TIP Is it true suction strainers are bad to put in my hydraulic system? Suction strainers are very useful in a hydraulic system because they will stop larger contaminants that may have entered the reservoir from reaching the pump. This will help to prevent damage to the pump and extend it's life. You must remember to clean the suction strainer periodically so it doesn't become clogged with debris. If it is not kept clean a vacuum condition on the suction side of the pump will be created which may cause cavitation to occur in the pump. This will damage the pump and could ultimately result in it's failure.

H Y D R A U L I C S

SHUTTLE VALVES

• Features 2 inlet ports and 1 outlet port • Flow at the outlet port will originate at the inlet port having the highest pressure • Used in circuits where the highest pressure has to be sensed, such as load sensing circuits • Maximum continuous pressure: 5,000 PSI Model # Max. GPM Ports (ORB) Wt. (lbs.) ITEM VS/F/6 5.0 6 0.5 8009847 VS/F/8 10.0 8 1.0 8009854

READY MADE HYDRAULIC HOSE

• 1/2" swivel JIC female hose ends • 2 wire SAE 100 R2 AT hose • Max. continuous pressure: 3,500 PSI

PRICE 34.99 39.99

CUSTOM RESERVOIR MOUNTING RING

* power pack not included

If we don't have what you require we also offer FREE* hydraulic hose crimping with a wide variety of hose and fittings to choose from.

Length Wt. (lbs.) ITEM PRICE 2 ft. 1.3 8007250 14.99 3 ft. 1.6 8007251 15.99 4 ft. 2.3 8007252 17.99 6 ft. 2.8 8007259 22.99 8 ft. 2.6 8007260 26.99 * On fittings and hose purchased from Princess Auto.

• Can be attached to a custom built reservoir so it can be directly mounted onto the SPX Stone power packs • Reservoir mounting flange: 4-3/4" dia. x 1-5/8" wide 99 8007156 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HAND CONTROL with MICRO SWITCHES

• Internal 3/8" NPT threading for mounting • Normally open, single pole, single throw, momentary switches • Switch is pre-wired with the leads extending 18" past the end of the handle 8002552 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

1/2 HP DEEP-WELL SUBMERSIBLE PUMP

• Pressed 304 stainless steel pump shell • Top of shell O-ring for positive and effective performance • Polypropylene discharge and suction • Non spinning check valve • Stainless steel hexagon drive pump shaft • Designed for homes, cottages and farms in water wells 4" or larger in diameter • GPH: 410 @ 140 ft., 500 @ 120 ft., 590 @ 100 ft., 670 @ 80 ft., 740 @ 60 ft. 99 8004188 – Wt. 24.3 lbs. . . . . . . . . . . . . . . . . . . . . .

1/2 HP PUMP ACCESSORY KIT

GFI RECEPTACLE TESTER

1/2 HP SEWAGE PUMP

399

110-125V. 8003374 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

A R M

for 8004188

Kit includes: 150 ft. of submersible cable, pressure switch, pressure gauge, bronze tank “T”, and factory spliced heat shrink pump cable. 8004200 – Wt. 22.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

9999

799

1/4 HP SUBMERSIBLE UTILITY PUMP

• 115V, 60 Hz motor with built-in overload protection • Cast iron housing • 2" discharge • Max. head: 27 ft. • Vertical switch 8003417 – Wt. 63.8 lbs. . . . . . . . . . . . . . . . . . . . . .

19999

PRESSURE WATER TANKS

• Automatic electronic switch system allows pump to operate without float switch • Designed for a maximum lift of 25 ft. • Water cooled, continuous duty motor • 1" NPT discharge with hose adapter • Up to 1525 GPH 99 8003918 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

169

1-1/2" THREADED STEM LEVELER

Use to level all types of farm or shop equipment. 8004291 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . U BRACKET 8004292 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . CORNER BRACKET 8004293 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

99¢ 99¢ 99¢

• No water-air or water-tank contact for rust free and no seeping operation • No waterlogging, eliminates the need for air volume control • Bladder is made from synthetic rubber to increase reliability and life span • Max. operating pressure is 75 PSI • Designed for water systems equipped with a jet pump 9.2 GALLON 8004191 – Wt. 10.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . 20.5 GALLON 8004190 – Wt. 21.7 lbs. . . . . . . . . . . . . . . . . . . . . .

6999 14999

1/3 HP COLUMN SUMP PUMP

A R M 14 PC SNAP HOSE CLAMPS

Assorted sizes. 8007603 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

12 OUTLET POWERBAR with CLAMP

• 115V 60 Hz. motor • Air cooled pump with thermal protection • Adjustable vertical float • Flow cap.: up to 40 GPM with 10 ft. lifting • Fits in basins as small as 1/2" dia. • Discharge: 1-1/4" NPT 8003416 – Wt. 15.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

5999

SPOTLIGHT with EMERGENCY FLASHER

• Heavy duty clamp for secure positioning • 12 outlet, 6 ft. cord • Lighted on/off switch 8005783 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 6-1/2" lens • 2,000,000 candle power • Includes 115V charger and cigarette lighter adapter • Adjustable stand 99 8005866 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

MISSING 1499

Have you seen this child?

Marcus McKay Date of Birth: February 6, 1992 Hair Colour: Brown Eye Colour: Brown Missing From: Mallard, Manitoba Missing Since: July 15, 2000

Age Enhanced

1-800-387-7962 to report on a missing child anywhere in Canada

All calls confidential - No name required. A missing child is everyone's responsibility.

LOGSPLITTERS

F A R M

31 TON HORIZONTAL/VERTICAL LOGSPLITTER VERTICAL

HORIZONTAL

• 9 HP OHV Honda engine • 24" stroke cylinder, 5" bore For off-road towing only! • Splitting length: 24" • Ram force: 31 tons • 2-stage Haldex Barnes pump • Automatic kick-off valve allows both hands to be free to handle split wood and set up a new log while cylinder is retracting • Cycle time: 11.5 sec. (no load), 30 sec. (full load, full extension) • Oil reservoir: 4.75 gals • 4.8 x 4 x 8 high speed wheels • Trailer coupler fits 1-7/8" ball • O’all horizontal dim.: 85"L x 32"H x 47"W • Horizontal working height: 23" 2400013 – Wt. 688.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

279999

16 TON LOGSPLITTER For off-road towing only!

• 5 HP Honda GC engine, 24" stroke, 4" bore cylinder; 2-stage Haldex Barnes pump • Automatic kick-off valve retracts cylinder, leaving hands free to place another log in position • 5.30/4.50-6 wheels for low speed towing only • Trailer coupler: 1-7/8" 2400009 – Wt. 516.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

179999

POULTRY PRODUCTS

A R M

HEAT LAMPS A) INFRA-RED BROODER LAMPS

• Strong triple corrosion protected steel cap and reflector • Reflector is designed deeper for improved bulb protection • 10 ft. grounded cord

WITHOUT SWITCH 2470016 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WITH SWITCH

1999

Energy saving hi/low/off switch 8041353 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

B) HEAT LAMP BULBS Wt. 0.3 lbs.

549 99 0700269 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 0700268 – Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

POULTRY FEED EQUIPMENT C) 2 QT. GAME BIRD FOUNTAIN

• Waters up to 175 birds • O’all dim.: 6-1/2" dia. x 2-1/2" deep 2470048 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C

2699

D) GALVANIZED METAL SLIDE TOP FEEDER 18" LONG 2470129 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 24" LONG 2470047 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . E) GALVANIZED METAL FEED BASE

D F H

For a 1 quart jar. 2470042 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . F) 1 QUART PLASTIC JAR 2470021 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

E G

449 549 349 179

G) SCREW-ON PLASTIC WATER BASE

For a 1 quart jar. 2470038 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

179 H) 1 GALLON PLASTIC JAR 49 2470020 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 I) SCREW-ON PLASTIC WATER BASE

For a 1 gallon jar. 2470039 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

J) POULTRY REEL TOP FEEDER

Galvanized metal construction. 24" LONG 2470099 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 48" LONG 2470098 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399 1199

K) 2 GALLON GALVANIZED METAL WATER FOUNTAIN

MISSING

Double wall. 2470100 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

Have you seen this child?

Daleen Bosse Date of Birth: March 25, 1979 Height: 5 ft. 5" Weight: 170 lbs. Hair Colour: Black Eye Colour: Brown Missing From: Saskatoon, Saskatchewan Missing Since: May 18, 2004

1-800-387-7962 to report on a missing child anywhere in Canada All calls confidential No name required. A missing child is everyone's responsibility.

LIVESTOCK & HORSE CARE

F A R M

LIVESTOCK WATERERS

A) PIGLET NIPPLE DRINKER

• 1/2" male NPT • 1/4" guard • Stainless steel and brass construction • Adjustable waterflow 2470108 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

C) AUTOMATIC FLOAT VALVE

• Trough-O-Matic float valves automate water supply for stock tanks, troughs, and barrels, etc. • Garden hose inlet connection • 375 GPH capacity • Plastic housing 49 2470082 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

449

B) HOG NIPPLE DRINKER

• 1/2" male NPT • All stainless steel construction • Adjustable waterflow 2470109 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . .

399

D) GALVANIZED FLOAT BOWL

• Non-siphoning • Single plastic float and arm with brass valve for setting water level • Hinged cover for easy maintenance • Water line entry on both sides of bowl with 1/2" brass fitting • Bowls can be fitted back to back 99 2470105 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) HOG DRINKING NIPPLE

• 1/2" male NPT • High quality 303 stainless steel construction • Adjustable water flow 2470110 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . .

599

RUBBER PAILS AND TUBS

E DuraFlex rubber buckets, pails, and tubs are moulded from the finest corded rubber for maximum strength and durability. The unique pliable properties minimize risk of injury to animals and are crack, freeze, and crush proof. E) RUBBER FEED PANS

Cap. 2.2 litre 4.4 litre 13.2 litre

Wt. (lbs.) 1.0 1.6 3.4

ITEM 2470072 2470074 2470066

Cap. 8.8 litre 11 litre

Wt. (lbs.) 2.8 3.0

ITEM 2470069 2470068

PRICE 10.49 11.49

G) RUBBER FLAT BACK BUCKET

1899

H) RUBBER TUB

6 litre capacity. 2470067 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

STAINLESS STEEL DIPPERS

Non magnetic, anti-rust. I I I I

17 litre capacity. 2470070 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PRICE 5.49 6.99 10.99

STAINLESS STEEL PAILS Size 4 litre/3 qt. 9 litre/10 qt. 11.5 litre/12.5 qt. 16 litre/17 qt.

F) RUBBER PAILS

Wt. (lbs) 1.1 2.1 2.7 2.9

ITEM PRICE 2470318 9.99 2470305 21.99 2470294 26.99 2470306 29.99

J) STAINLESS STEEL BASINS 7 LITRE/7.5 QT CAP. 8016381 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 LITRE/9 QT CAP. 8001607 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 14.2 LITRE /15 QT CAP. 8001608 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

799 1099 1599

1/2 litre capacity. 8016372 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 litre capacity. 8057434 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299 399

12 LITRE ALL-PURPOSE RUBBER PAIL

8007195 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

F A R M

PLASTIC PAILS AND FEEDERS

LIVESTOCK FEEDING EQUIPMENT

A B C DuraFlex plastic buckets and feeders are moulded from a tough polyethylene resin that is impact resistant, protects against warpage, and helps prevent stress cracks. All buckets feature heavy duty steel eyelets and handles.

D) 2.2 LITRE CALF BOTTLE with NIPPLE 2470076 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . E) 6.6 LITRE PLASTIC MINI FEEDER

A A A B B B C C C

Size 5.5 litre 5.5 litre 5.5 litre 8.8 litre 8.8 litre 8.8 litre 24.2 litre 24.2 litre 24.2 litre

Colour Wt. (lbs) Green 0.7 Red 0.7 Blue 0.6 Green 1.1 Red 1.1 Blue 1.1 Green 3.5 Red 3.5 Blue 3.5

ITEM PRICE 2470029 3.99 2470030 3.99 2470064 3.99 2470052 7.49 2470022 7.49 2470051 7.49 2470065 15.99 2470027 15.99 2470024 15.99

O’all dim.: 9-3/4" x 11" x 5-1/2". 2470032 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

599

1299

GALVANIZED SCOOPS 2.2 LITRE SCOOP 8011377 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 LITRE SCOOP 8011386 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

599 699 6.6 LITRE SCOOP 99 8011395 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

HEATED BUCKETS and DE-ICERS F G F) UNIVERSAL DRAIN PLUG DE-ICER

• Fits in most tanks on the market • Operates only when temperature reaches freezing • 1,500W 99 8016229 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

G) 1,500W SUBMERSIBLE TANK DE-ICER

• Operates automatically only below 0°C (-32°F) • Operates efficiently at the bottom of tank • Safe in plastic; aluminum coated 99 8016210 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

H) 2 GAL (8 LITRE) HEATED BUCKET

• Thermostatically controlled for efficiency • Heavy duty bail with reinforced connectors • Table of measurements 8001030 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

3999

H) 5 GAL HEATED BUCKET

• Thermostatically controlled for efficiency • Field tested to -28°C (-18°F) 8019823 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

6999

• Operates only when necessary • Unique heating design • Replaceable element hidden from animals • Easy grip handle for portability 8001031 – Wt. 10.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

8999

I) 1,250W FLOATING TANK DE-ICER

• Thermostatically controlled • Durable construction; safe in plastic • Field tested to -23°C (-9°F) with 30 MPH wind 8017184 Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

4999

BALE HOOK

HAY NETS • Holds 25 lbs. • Ideal for stable or shipping • Braided poly rope

• “D” style handle • O’all length: 13" 8007202 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.6 lbs.

2470241 – Black 2470242 – Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I H) 16 GAL (64 LITRE) ALL PURPOSE HEATED TUB

/ea

499

NYLON LARIAT

COTTON LEAD ROPES • 3/4" x 10 ft. • Solid cotton • Nickel plated bull snap Wt. 1.3 lbs.

2470257 – Hunter Green 2470253 – Black 2470254 – Blue 2470248 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

699/ea

• Custom made, tied, and pre-stretched • Meets requirements of professional roper as well as working rancher • 7/16" x 30 ft. • Medium 2470210 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

229946

POLY ROPE HALTER • No metal hardware • Back braided ends for extra strength • Assorted colours • 800-1,100 lbs. 19 2470184 – Wt. 0.3 lbs. . . . . . . . . . . . . . .

FOAL HALTERS

• 3/4" double ply and stitched nylon • Nickel plated hardware • Adjustable noseband and throat strap

A R M

Wt. 0.4 lbs.

2470214 – Hunter Green 2470212 – Blue

2470223 – Red 2470225 – Black . . . . . . . . . . . .

649/ea

“THE OLD TIMER” HALTERS • Triple ply cheeks • 6 ring cinch type; brass plated hardware • Extra heavy duty double ply 1" premium grade nylon Size of horse 500-800 lbs. 800-1,000 lbs. 1,100-1,600 lbs.

Wt. (lbs.) 1.1 1.1 1.2

Blue 2470204 2470208 2470199

Red 2470202 2470206 2470197

Black 2470203 2470207 2470198

Dark Green 2470205 2470209 2470200

LEATHER and HORSE CARE

PRICE 13.99 13.99 13.99 A B

A) ARCTIC DUBBIN – Contains mink oil.

• Waterproofs leather subject to rugged outdoor use • Prevents the formation of salt stains 49 2470266 – 120 g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) YELLOW SADDLE SOAP for LEATHER

Cleans and lubricates to prevent brittleness. 2470170 – 340 g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

749

C) NEATSFOOT OIL COMPOUND

Softens and preserves all smooth leathers 2470169 – 1 litre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) HORSEMAN’S ONE STEP

• Cleaning conditioner for harnesses and saddles • Contains a mild cleaning agent, lanolin, sanicide, and a fungicide 2470265 – 425 g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899

ALL LIQUID CHEMICALS CANNOT BE SHIPPED E) SHOW SHEEN HAIR POLISH

• Labour saving “hair polish” dries to a bright, natural sheen that resists dust and stains • Non-sticky polish keeps manes and tails tangle free • Makes your animal shine and easy to maintain for up to a week 99 2470138 – 950 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RODENT TRAPS G

H) RAT AND MICE PELLETS

F) WOOD and METAL TRAP FOR MICE – Pkg. of 2. 49 2470113 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg. FOR RATS 49 2470115 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg. G) METAL MOUSE TRAP 99 2470114 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1 2 14

14" PLATERS HOOF RASP FARRIER FILE

• For race track and other horses with light shoes • Rasp and file on opposite sides 99 2920953 – Wt. 1.3 lbs. . . . . . . . . . . .

• Use for indoor and outdoor rodent control • Kills norway rats, roof rats and house mice • Effective 4 or 5 days after consuming 8006918 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

I) GOPHER TRAP

• No poisons or gases • Safe and non-toxic • Easy to set 8006912 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

SPEEDY STITCHER SEWING AWL • Sew any heavy material • Comes with #8S and #8C needles and 1 refillable bobbin of coarse nylon thread • Includes 30 yards of replacement thread 8023060 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

COARSE STITCHING THREAD

30 yards coarse thread. 8023079 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

F A R M

GROOMING TOOLS A

A) HOOF PICKS

Nickel plated with vinyl coated handle. Wt. 0.1 lbs.

2470156 – Red 2470157 – Green 2470159 – Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

99¢

B) CURRY COMB

Large rubber handle with soft round teeth. 2470154 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) ECONOMY CURRY COMBS Wt. 0.2 lbs.

2470162 – Red 2470164 – Green

2470165 – Black 2470166 – Blue . . . . . . . . . . .

129

• 6-1/2" x 2-1/2", 1-1/2" medium stiff plastic bristles • Handy for touch ups Wt. 0.3 lbs.

H) GROOMING BRUSH

• 8-1/4" x 2-3/4" with 1-3/4" long bristles • English style plastic block H

9" polystyrene comb is good for mane and tail. 2470151 – Green

D) JUNIOR BRUSH

8000140 – Blue 2470160 – Red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E) PLASTIC COMBS Wt. 0.1 lbs.

Lightweight and flexible has adjustable hand strap.

Wt. 0.6 lbs

2470153 – Blue . . . . . . . . .

99¢

F) SHEDDING BLADE

• Fine tooth spring steel blade; use open or closed • Quickly removes matted hair 99 2470155 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) MANE CURRY COMB

• 6 bars, closed back with a mane comb • Wooden handle 2470168 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . Colour

Soft Bristles 8005261 8005263

Red Blue

Medium Bristles 8005264 8005265

619

PRICE 5.99 5.99

FARRIER TOOLS

SOLID STATE CATTLE PROD • Requires 2 “C” cell batteries (incl.) • 29" long 2470301 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4999

4 FT WHIP

I) RIGHT HANDED HOOF KNIFE

• Lightweight, well balanced fibreglass • Braided covers 2470238 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

J) HOOF NIPPERS

Stainless steel with moulded plastic handle. 2470171 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

FENCING

619

Drop forged with plastic coated handles. 2470183 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

379

2599

FENCE ENERGIZERS K Solid State L 12 VDC K) #C4465 – 115 VAC ECONOMY SOLID STATE ENERGIZER

• Digital timing • Fuseless design for improved lightning protection • Charges over 15 miles of clean fence • Controls most animals • Suitable for clean fences or light weeds only • Lamp flashes when system is operating • Vented, weather resistant, non-conductive cabinet • Moisture resistant internal components 99 2430077 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

L) 12V YELLOWJACKET LOW IMPEDANCE FENCE ENERGIZER

• 0.25 joule output @ 400 ohms (0.28 stored joules) • Charges up to 10 miles of clean fence • 3 battery options: 4 “D” cells, 6V, or 12V external • Built in ground rod and fence wire strap • 3-position switch for maximum power or battery saver mode • Portable and easy to use 99 2430078 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

129

FENCE ENERGIZERS

F A R M

B A PARMAK LOW IMPEDANCE FENCE ENERGIZERS

• Laser trimmed computer precision, solid-state circuitry provides a powerful low impedance shock through wet weeds and bush • Built in performance meter • Ideal for high tensile single or multi wire fence • Fuse protection A) Mark 6 – 115V

• Rated for up to 6 joules • Charges up to 30 miles of clean fence • Ideal for short and medium fence lengths 2430020 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

13999

B) Super Energizer-3 – 115V

• Rated for up to 9 joules • Charges over 50 miles of clean fence • Has built in performance meter • Ideal for large pastures 2430021 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

14999

C) 6 VDC SOLAR-PAK

• 0.169 to 1.4 joule rating • Charges up to 25 miles of clean fence • Will operate 21 days in total darkness • Includes sealed rechargeable battery • Performance meter shows fence condition • Shocks through wet weeds and brush 2430082 – Wt. 19.6 lbs. . . . . . . . . . . . . . . . . . . . . .

ELECTRIC FENCE WIRE

D) 12 VDC MAGNUM 12 U.O.

• 0.87 to 2.7 joule rating • Charges up to 30 miles of clean fence • Use with 12 volt battery • Performance meter shows fence condition • Shocks through wet weeds and brush 2430083 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

11999

E) 115 VAC HORSE SURROUND

• 1.6 joule rating • Charges up to 5 miles of clean fence • Dual flashing operation light • Designed for an effective, safe shock to quickly control horses • Ideal for small to medium pastures 99 2430084 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

F) 12 VOLT SOLAR POWERED FENCE ENERGIZER

23999

• Low impedance for max power and longer life • Performance meter shows condition of fence • Sealed 12V rechargeable battery included • Charges up to 30 miles of fence • Weather proof, outdoor model 8027208 – Wt. 26.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

39999

by Parmak

• PVC coated fibreglass construction for greater strength, less stretch • Highly conductive/low resistance aluminum conductors • Fire and UV resistant Description Poly-wire Poly-wire Poly-wire Poly-wire 1/2" High Visibility tape 7/8" Equi-tape 1-1/2" Equi-tape *Fits Reel Easy #2430011 G G G G H H H

Length 656 ft. (200 m) 656 ft. (200 m) 1,312 ft. (400 m) 1,312 ft. (400 m) 656 ft. (200 m) 492 ft. (150 m) 200 ft. (61 m)

Color Yellow/Black White Yellow/Black Yellow/Black Yellow/Black Yellow/Black White

I) ALUMINUM WIRE

Gauge Length Wt. (lbs.) ITEM PRICE/roll 16 1,312 ft. (400 m) 5.9 2430029 29.99 Shop online or download our catalogue!

www.princessauto.com

Spool Wt. (lbs.) Cardboard 2.6 Cardboard 2.5 Cardboard 5.2 Reel Easy* 5.7 Reel Easy* 5.8 Reel Easy* 8.2 Reel Easy* 3.1

ITEM 2430079 2430023 2430080 2430024 2430026 2430027 2430028

PRICE 24.99/roll 24.99/roll 44.99/roll 49.99/roll 56.99/roll 69.99/roll 49.99/roll

J) GALVANIZED WIRE

• 200,000 lbs. tensile strength • 1,417 lbs. breaking strength Wt. 14.3 lbs.

Gauge Length ITEM PRICE/roll. 16 1,312 ft. (400 m) 2430066 29.99 14 1,312 ft. (400 m) 2430065 39.99

INSULATED FENCE CABLE

TIE WIRE

A R M

• 50 ft./15 m spool • Rated to 20,000 volts • For use underground to connect fence wire between gate openings 2430013 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

A B

by Parmak

1499

INSULATOR TUBING • 50 ft. roll • Black polyethylene tubing fits up to 12-1/2" gauge fence wire 8005455 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

20 GAUGE x 30 M 8058610 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1299

SPLICING SLEEVES

Wire Size

A) TIE WIRE B) GREEN PVC COATED TIE WIRE 18 GAUGE x 30 M 8058601 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Qty. Wt. ITEM PRICE (lbs.) /pkg.

10 x 11 ga. smooth and 14-1/2 x 15-1/2 ga. barbed 10 0.2 2430049 5.99 14-1/2 x 15-1/2 ga. smooth 20 0.1 2430050 5.99 12-1/2 ga. smooth 25 0.1 2430048 5.99

Size

399 399

Type

Wt. ITEM PRICE (lbs.) 0.6 8058282 2.99 14G x 15 m Gal. Steel 0.5 8058326 2.99 16G x 15 m Gal. Steel 0.5 8058371 2.99 18G x 30 m Gal. Steel 0.2 8058415 1.49 20G x 15 m Gal. Steel 0.6 8058451 2.99 20G x 50 m Gal. Steel 20G x 7 m Stainless Steel 0.1 8058479 1.79 0.1 8058497 1.79 20G x 7 m Aluminum 0.1 8058512 1.79 22G x 10.4 m Brass 0.1 8058558 1.79 20G x 7.5 m Copper 19G x 15 m Black Steel 0.2 8058576 1.49 19G x 50 m Black Steel 0.6 8058585 2.99 16G x 3-1/8 lbs. Black Steel 3.3 8058594 3.99

WIRE TOOLS E

by Parmak

H F

F) FENCING WIRE CLAMP

• Designed to use with a puller to stretch wire • Works with barbed, smooth or insulated wire from 1/16" to 1/4" dia. • The harder the pull the stronger the grip 99 1580117 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) WIRE CUTTER

Specially designed jaws made to cut 12-1/2 ga. high tensile wire. 2430055 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

G) FENCE STRETCHER AND SPLICER

2999

D) 20" MULTI-GROOVE CRIMPER

For use with splicing sleeves. 8002154 – Wt. 5.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4999

E) 10-1/2" FENCE TOOL

• Head has striking face, staple removing hook pincer, and clamp on top jaw • Grips for straining, twisting, and cutting wire • Features cushion grip handles 2921237 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Hardened guide and clamp grip wire firmly over a large area for superior clamping • Makes repairs easy and is ideal to quickly tighten any fence 99 8011787 – Wt. 8.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) WIRE TWISTING TOOL 8025503 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . I) FENCE TESTER

5 lights glow in sequence to indicate approx. voltage from 1,000 volts to 5,000 volts. 99 2430016 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

FENCE POSTS J) FIBREGLASS STEP-IN POST

• 44" long • High visibility yellow 2430009 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

349

K) YELLOW “BIGFOOT” STEP-IN POST

• Non-conductive poly construction • 10" steel spike • 48" long 2430008 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

279

34 1699

ELECTRIC and HIGH TENSILE FENCE ACCESSORIES

D) WIRE STRAINER HANDLE 2430053 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

A) GATE HANDLES

3-1/2" spring. YELLOW RUBBER GRIP 2430031 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . RED PLASTIC GRIP 2430032 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

349 249 B) TENSION MEASURING SPRING 99 2430054 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

E) GROUND CLAMP

C) WIRE STRAINER

Connect wire and tape, gate handle to wire or tape, etc. 2430012 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

For high tensile fence wire. 2430052 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

439

Fits 1/2" to 1" dia. ground rods. 2430056 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . F) 2 WAY GATE ANCHOR 2430017 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . G) MULTI-PURPOSE PULSE CONNECTORS

849

A R M

349 499 399

ELECTRIC FENCE INSULATORS H

/pkg.

• Designed for high tensile fencing • Nails included 2430045 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

849/pkg.

M) PKG of 25 INSULATORS for ROUND POSTS

I) PKG of 10 EXTENDED INSULATORS for WOOD POSTS

• Holds wire 5" from post • Nails included 2430035 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

L) PKG of 25 INSULATORS for WOOD POSTS

H) PKG of 25 INSULATORS for WOOD POSTS

• Holds wire 2-1/8" from post • Nails included 2430034 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

499/pkg.

• Fits 1/4" to 9/16" dia. and 5/8" fibreglass “T” posts • Holds wire 1" from post 49 2430033 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg.

N) PKG of 10 CORNER and END INSULATORS

J) PKG of 25 INSULATORS for WOOD and ROUND POSTS

Suitable for high tensile fencing. 2430039 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Insulator only • Can be used on round posts by using “J” bolts (not included) 49 2430038 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg.

O) PKG of 25 T POST INSULATORS

K) PKG of 25 INSULATORS for WOOD POSTS

P) PKG of 25 SCREW TITE FENCE INSULATORS

• For use with poly tape up to 1-1/2" wide • Holds wire 2" from post • Nails included 2430040 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Screw tight for sucker rod, fits 1/4"-3/4" diameter • Will hold wire, poly wire, and poly tape to 1-1/2" 99 8014249 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . /pkg.

849/pkg.

GRAB HANDLE

• Fits 1.25 and 1.33 lb./ft. T posts • Holds wire 1" from post 2430036 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

749/pkg. 549/pkg.

BOW HANDLE

• 11-1/2" long x 5/8" dia. • 1/4" mounting holes 3893195 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

449

• Zinc plated, formed steel construction • O’all dim.: 7-1/2" x 1-3/8" x 2" 3830034 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

379

Sign-up to recieve E-mail notification of our upcoming promos at:

www.princessauto.com

F A R M

DOOR HARDWARE • 1/16" galvanized steel construction • Lock joint design holds tracks together tightly & permanently, making spreading joints impossible • Creates a smooth continuous runway for hangers • Use minimum of 1 hanger per 2 feet of door length Length 6 ft. 8 ft. 10 ft. 12 ft.

Wt. (lbs.) 9.7 11.9 14.6 11.6

ITEM 3830011 3830012 3830013 3830014

A) BOX TRACK

PRICE 13.99 17.99 21.99 24.99

F G

E D

B) SQUARE TRACK MOUNTING BRACKET

• 12-gauge galvanized steel • Complete with 2-1/2" galvanized lag bolts 3830016 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

359

C) LOCK JOINT CLIP

• Zinc plated formed steel construction • Fastener included 3830017 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

219

D) NON ADJUSTABLE TRACK HANGER

• Door thickness: 1-3/4" • Capacity: 125 lbs. per pair 8008470 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

E) BOX TRACK TRUCK AND PENDANT

• 1/2" dia. zinc plated pendant • Capacity: 400 lbs. per pair 3830020 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DIGGING TOOLS

1499

F) VERTICALLY ADJUSTABLE BOX TRACK HANGERS

• Door thickness: 1-3/4" to 2-1/2 • Capacity: 400 lbs. per pair 3830019 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

G) LATERALLY ADJUSTABLE BOX TRACK HANGERS

• Door thickness: 1-3/4" to 2-1/2" • Capacity: 350 lbs. per pair 3830018 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

SHOVELS

H H) SQUARE POINT SHOVEL

• O’all length: 40.5" • Wood handle 8024924 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1299 I

I) GENERAL PURPOSE SHOVEL

• Blade: 9-3/4" x 12-1/2" • Plastic coated steel handle • O’all length: 41" 8024880 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1399

J) ROUND POINT SHOVEL

• Blade: 8-3/4" x 12" • O’all length: 40-1/2" • Wood handle 8024951 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCRAPERS

LONG HANDLE

• Blade measures 5-1/2" x 7" • Total length: 47-1/2" 8019850 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

“D” GRIP HANDLE

• Blade measures 6-1/2" x 14" • Total length: 44-1/2" 8019869 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2599

TRACTOR SEATS

F C

A R M

G F H

Hardware not included With a variety of mounting patterns, these seats can E) Hi-back deluxe TRACTOR seat fit most industrial, commercial and farm equipment. • Black vinyl seamless moulded cushion with drawn

steel pan and protective edge trim • O’all dim.: 18-1/2"W x 17-7/16"H x 21-3/4"L 8001993 – Wt. 20.0 lbs. . . . . . . . . . . . . . . . . . . . .

A) BLACK PAN SEAT

• Rigid seat • 3 drain holes • 2 fixed mounting bolts 8002694 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

12999

F) DELUXE HI BACK TRACTOR SEAT

3499

A deluxe version of the above seat. 2060333 – Wt. 17.0 lbs. . . . . . . . . . . . . . . . . . . . . .

14999

G) UNIVERSAL SUSPENSION SEAT

• Moulded cushion, drawn steel pan with protective edge trim • Black vinyl cover 99 2060366 – Wt. 7.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Suspension includes hydraulic shock absorber • Multi-purpose application: agriculture, forklift and construction • Horizontal slide travel: 8-3/4" 99 8032915 – Wt. 44.0 lbs. . . . . . . . . . . . . . . . . . . . . .

C) HIGH BACK SEAT with STEEL PAN

H) 3 PC TRACTOR SEAT (John Deere)

B) ECONOMY TRACTOR SEAT

Similar to above but also features air circulation design, water drainage and safety switch cavity. 8002695 – Wt. 14.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

D) COMPACT TRACTOR SEAT

• 16" narrow seat, flip style with brackets and drain hole • Universal application for compact tractors • Foamed polyurethane upholstery • All hardware included 99 8043609 – Wt. 12.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

149

Fits tractor models: 1010, 2010, 2510, 2520, 3010, 3020, 4000,4010, 4020, 4040, 4230, 4320, 4340, 4400, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 and 7520 and many combines. 99 2060068 – Wt. 18.7 lbs. . . . . . . . . . . . . . . . . . . . . .

159

I) BLACK TRACTOR SEAT SLIDES

• Heavy duty slides • Large lever 8002693 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

TRACTOR MUFFLERS & CLAMPS MUFFLER CLAMPS

EXHAUST PIPE CLAMP Fits Ford 9N, 2N, and 8N. 2440062 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

829

EXHAUST CAPS Fits pipe dia. 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3"

Wt. (lbs.) 0.5 0.6 0.7 0.7 0.9 0.9 0.8

ITEM 2440066 2440067 2440068 2440069 2440070 2440071 2440072

PRICE 4.99 5.19 5.49 5.79 5.99 5.99 6.29

Fits pipe dia. Wt. (lbs.) 1-1/2" 0.3 1-5/8" 0.3 1-7/8" 0.4 2" 0.3 2-1/4" 0.4 2-1/2" 0.4 2-3/4" 0.6 3" 0.6 3-1/2" 0.6 4" 0.7

ITEM 3860034 3860035 3860044 3860036 3860039 3860037 3860040 3860041 3860042 3860043

PRICE 2.99 2.99 2.99 2.99 2.99 2.99 3.29 3.39 4.19 5.19

F A R M

TRACTOR MUFFLERS Princess Auto carries replacement mufflers for popular models of common tractors. Make Models Covered

Wt. ITEM PRICE

ALLIS CHALMERS B, C & CA (excluding low octane engine) (38-57) - long muffler CASE V, VA, VAC & VC (Gas) (53-55), 200B, 300B, 400B, 500B (57-59)

300, 400, 500 & 600 (53-57), 310 & 350 (54-59) 9N, 2N & 8N (39 - 52) - (Gas) NAA (53-54), 600 & 700 (55-57), 501; 601 & 701 (58-62); 2000 series (63-64) with 134 cid gas; 800 & 900 (55-57), with 172 cid gas 801-901 (58-62), 4000 series (61-64), and 1801 (58-60) with 172 cid gas and diesel, 501, 601, 701 (58-62), 2000 series (63-64) with 144 cid Diesel, 4000 (65-75), 3600 and 4600 (75-81), 3 cylinder diesel - all orchard and narrow INTERFarmall A, Super A, B, BN, C, and Super C (39-54), NATIONAL Farmall 100, 130, 140, 200, 230, and 240 (C-123 gas), Farmall 330 & 340 (C-135 gas), International 330 & 340 (Utility C-135 gas), Also T-340 Crawler (C-135 gas) Farmall H, Super H, M, MD, Super MD, Super MTA, International W-4, S-W4, W-6, S-W6, WD6 & S-WD6 (Gas and Diesel), Farmall 300 and 350 (C-175 gas engine), Farmall 400 and 450 (C-281 gas and D-281 Diesel), Farmall 460 and International 606 (C-221 Gas and D-236 Diesel), Farmall 560 (C-263 gas and D-282 Diesel) Farmall Cub - Standard (Not Lo-boy) International W-4 (with C-152 gas), Super H and SuperSuper W-4 (with C-164 gas), Farmall 300 and 350 (C-169 and C-175 gas) MASSEY Massey Harris (42-57) Gas and Diesel FERGUSON 20, 20K, 22, 22K (excluding 1948), 30, 30K, 33, 333, 44, 44SPL, 44D, 44K, 44-6, 444, 81, 82, 101 Jr., 101 Sr. MF-165, MF-175& MF-180 (Gas and Diesel), (Perkins 4-236 and 4-248 c.i.d.) OLIVER 770, 880, 1600 (Gas and Diesel) 1650 (Gas) 1550 (Gas and Diesel) FORD

TARPAULINS & ACCESSORIES

Cut Size (ft.) 5x7 6x8 8 x 10 10 x 12 10 x 16 12 x 16 12 x 20 12 x 24 12 x 36 15 x 20 18 x 24 20 x 30 24 x 30 30 x 40 30 x 50 30 x 60

Approx. Finished Size 4 ft. 6" x 6 ft. 6" 5 ft. 6" x 7 ft. 6" 7 ft. 4" x 9 ft. 6" 9 ft. 4" x 11 ft. 6" 9 ft. 4" x 15 ft. 6" 11 ft. 4" x 15 ft. 6" 11 ft. 6" x 9 ft. 3" 11 ft. 4" x 23 ft. 6" 11 ft. 6" x 34 ft. 6" 14 ft. 3" x 19 ft. 6" 17 ft. 3" x 23 ft. 6" 19 ft. 1" x 29 ft. 4" 23 ft. x 29 ft. 4" 29 ft. x 39 ft. 3" 29 ft. x 49 ft. 2" 29 ft. x 59 ft.

• Blue colour (shown) • Weave: 10 x 10, 1,000 denier • 2.9 oz/sq. yd. polyethylene • Coating: 40 micron both sides • Grommets: 3 ft. spacing, aluminum construction • Tear-resistant • Poly rope in hem • UV treated Wt. ITEM PRICE (lbs.) 0.8 2480853 2.99 1.2 2480309 3.99 1.7 2480291 5.99 2.6 2480325 8.99 3.4 2480333 11.99 4.0 2480341 13.99 4.9 2480048 17.49 5.5 2480861 19.99 7.9 2480049 31.49 6.2 2480042 21.49 8.9 2480043 31.49 12.5 2480366 39.99 15.4 2480045 49.99 27.1 2480046 69.99 33.7 2480655 99.99 40.2 2480047 119.99

3.6 2440032 19.99 4.8 2440037 23.99 7.2 2440044 22.99 3.0 2440045 14.99

3.4 2440046 17.99

5.4 2440049 23.99

6.8 2440051 23.99 3.2 2440048 21.99 6.2 2440050 24.99 4.4 2440056 22.99 6.9 2440058 29.99 6.4 2440059 27.99

• Green colour • Weave: 14 x 14, 1,000 denier • 5.4 oz/sq. yd. polyethylene • Coating: 50 micron both sides • Grommets: 2 ft. spacing, aluminum construction • Reinforced corners • Tear-resistant • Poly rope in hem • UV treated Wt. ITEM PRICE (lbs.) 1.2 2480037 4.99 1.6 2480038 6.49 2.6 2481018 9.99 3.8 2481026 13.99 5.0 2480039 18.49 6.0 2481034 21.99 7.7 2480040 27.49 8.8 2481042 32.99 13.2 2480041 49.99 9.3 2481059 34.99 13.4 2481067 49.99 19.0 2481075 69.99 22.1 2481083 84.99 41.2 2481091 139.99 49.2 2481109 174.99 57.3 2481117 199.99

CANVAS TARPS • Reinforced triangular patches 4 layers thick at each eyelet with double stitched seams • Nylon rope in perimeter hem in sizes 12 ft. x 16 ft. and up • Grommets every 3 ft. around perimeter • Weight before treatment: 12 oz. sq/yd, after: 18 oz. sq/yd • Ideal for uses that require breathable fabrics to prevent rot or rust on objects • Tan in colour Cut Size Approx. Finished Size Wt. (lbs.) 6 ft. x 8 ft. 5 ft. 6" x 7 ft. 6" 11.0 9 ft. x 10 ft. 8 ft. 6" x 9 ft. 6" 11.3 10 ft. x 12 ft. 9 ft. 6" x 11 ft. 6" 13.3 12 ft. x 16 ft. 11 ft. 6" x 15 ft. 6" 23.1 12 ft. x 20 ft. 11 ft. 6" x 19 ft. 6" 28.2 12 ft. x 24 ft. 11 ft. 6" x 23 ft. 6" 33.9 15 ft. x 20 ft. 14 ft. 6" x 19 ft. 6" 34.8 18 ft. x 24 ft. 17 ft. 6" x 23 ft. 6" 48.0 20 ft. x 30 ft. 19 ft. 6" x 29 ft. 6" 70.2

F ITEM 8016489 8016522 8016531 8056916 8056925 8056934 8056943 8056952 8056961

PRICE 24.99 39.99 59.99 89.99 119.99 139.99 139.99 179.99 249.99

A R M

TARP REPAIR KIT

TARP TAPE • 2" wide x 35 ft. long • Sets in sunlight or heat • Fix rips and tears, reinforce stress points, join tarps

• Repair or install new grommets • Includes: punch, grommet installing tool, and fifty 1/2" brass plated grommets 2480663 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.3 lbs.

8012848 – Clear 2480005 – Blue 2480013 – Green 2480023 – Black 2480014 – Silver 2480024 – White . . . . . . . . . . . . . . . . . . . . . . . . . .

999/pkg.

1/2" GROMMETS

599/roll

Pkg. of 50. 2480903 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

549/pkg.

VELCRO PRODUCTS A

A) 2 PK VELCRO TAPE

General purpose applications. 3/4" x 5 FT. BLACK 8029769 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

2" x 4 FT. BLACK INDUSTRIAL STRENGTH

• 50% stronger closure • Waterproof adhesive 8030025 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1099

B) 4" x 2" BLACK INDUSTRIAL STRENGTH VELCRO STRIPS

2 strips per package. 8029901 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C D

349

C) 1-7/8" INDUSTRIAL STRENGTH VELCRO COINS

• 50% stronger closure • Waterproof adhesive 8030016 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

349 D) 2" x 36" 2 PK BLACK VELCRO STRAPS 99 8030052 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 PC LOOP SETS

TARP GRABBERS • Easy to install • 4 times stronger than brass grommets • Made entirely from recycled material • 12 pc set 8015685 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

10 PK TARP EYELETS

F • 5-1/2" long • Stretch cord E) HOOK LOOP SET

Vinyl covered metal hook. 3800050 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . F) BALL LOOP SET 3800051 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

3 /set 299/set 49

• Self sealing eyelets for plastic or canvas sheeting • Snap together for easy installation • 7/16" I.D. 1-1/8" O.D. 8026218 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

299/pkg.

CARABINER KEYCHAINS

A R M

• Made of aluminum • With key ring • 3" long 3800231 – Wt. 0.1 lbs. . . . . . . .

BUNGEE CORDS A B

299/ea.

12 PC BUNGEE TARP TIES C D A) 6 PC HEAVY DUTY BUNGEE CORD KIT

Sizes: 18", 24", 32", 48", 64", and 72" cords x 3/8" dia. 3800695 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . .

1299/pkg.

B) 6 PC BUNGEE CORD KIT

• 4 each of 12", 18", and 24" long • Fixed ball on one end and adjustable hook on the other • Design allows hook removal for quick installation, and can be tightened to easily remove slack 49 3800479 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

2 each of 12", 18", and 24" cords x 1/4" dia. 49 3808722 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg. C) 5/16" BULK BUNGEE CORD 3809803 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . D) PLASTIC HOOKS for BUNGEE CORD 3809811 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

4 49¢/ft. 49¢/ea.

TIE-DOWN STRAPS E F E) RUBBER TIE-DOWN STRAPS

• Made from weather resistant EPDM rubber • Includes “S” hooks • Approx. 1/4" thick with 5/8" thick end blocks • Sizes listed are for strap only (add 4" for hooks) • Package of 5 Size Max. Safe Stretch Wt. (lbs.) 10" 15" 0.9 15" 22" 1.2 21" 32" 1.4 31" 46" 1.8 41" 61" 2.2

ITEM 3800317 3800318 3800319 3800320 3800321

PRICE 4.49/pkg. 4.99/pkg. 5.99/pkg. 6.99/pkg. 9.99/pkg.

10 per package. 8012786 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

199/pkg.

EXTRA “S” HOOKS

10 PC RUBBER TIE DOWN SET

Includes two 10", three 15", three 21", and two 31" straps. 3809985 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . .

• Stretch to 1-1/2 times their original size • Hooks add 4" to o’all strap length • Made of weather resistant EPDM rubber • 1/2" thick reinforced eyelets 9" STRAP 8060607 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 15" STRAP 8060616 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 20" STRAP 8060643 – Wt. 0.3 lbs.

89¢ 119 39 .......................... 1 89 .......................... 1

30" STRAP 8060652 – Wt. 0.3 lbs. 20" ADJUSTABLE STRAP WITH HOOKS

Holes every 5". 8057498 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

30" ADJUSTABLE STRAP WITH HOOKS

1399/set

MULTIPURPOSE TARPS

• 12 x 12 UV treated mesh poly fabric • 1/4" polypropylene rope drawstring and handles • Ideal for yard clean-up, equipment covers, and more 6 FT x 6 FT MULTI-PURPOSE TARP

Finished size approx. 5 ft. 4" x 5 ft. 4". 2480062 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

9 FT x 9 FT MULTIPURPOSE TARP

F) HEAVY DUTY TARP STRAPS

Finished size approx. 8 ft. 2" x 8 ft. 2". 2480058 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1099

Holes approximately every 7". 8008372 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

239

CABLE & ROPE

F A R M

GALVANIZED CABLE • Excellent for winching, towing, etc. • Flexible pre-formed 7 x 19 construction 50 FT. COIL

Dia.

Breaking Strength 1/8"** 2,000 lbs. 5/32" 2,800 lbs. 3/16" 4,200 lbs. 1/4" 7,000 lbs. 5/16" 9,800 lbs. 3/8" 14,400 lbs. 1/2"* 23,600 lbs. * 6 x 9 construction

Wt. (lbs.) 1.3 2.1 3.0 5.9 8.3 12.5 20.8

ITEM 3820049 3821048 3821063 3821089 3821113 3821147 3821170

100 FT. COIL

PRICE Wt. (lbs.) 8.49 2.9 8.99 3.8 10.99 6.2 14.99 11.7 19.99 16.7 29.99 24.8 49.99 –

ITEM 3820048 3821055 3821071 3821097 3821121 3821154 –

150 ft. COIL

PRICE Wt. (lbs.) 16.99 4.0 16.99 6.3 19.99 9.3 29.99 17.2 39.99 – 59.99 – – –

ITEM

PRICE

3820050 24.99 3820051 24.99 3820052 32.99 3821105 45.99 – – – – – – ** 7 x 7 construction

GALVANIZED CABLE BY THE FOOT

Electro galvanized finish. (7 x 7) 1/8" 3800378 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . (7 x 19) 3/16" 3800379 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

(7 x 19) 3/16" PVC COATED TO 1/4"

19¢/ft. 3800381 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 39¢/ft. (7 x 19) 1/4"

29¢/ft. 3800382 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 39¢/ft.

WIRE ROPE THIMBLES AND CLIPS

U-Bolt

Dead Part

Wire rope clips are probably the easiest method of forming a loop. • Do not over tighten first and last clips B) CLIPS Base A) THIMBLE • Properly attached, they could reach an efficiency of 85% • Both nuts on each clip should be tightened to the same degree • All clip bases must rest against the “live” part of the rope, the U-bolt against the “dead” part • For 1/8" to 1/2" cable – a minimum of 3 clips is recommended A) WIRE ROPE THIMBLES – Package of 2

Size 1/8" 3/16" 1/4" 5/16" 3/8" 7/16-1/2"

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.2

ITEM 3820056 3820058 3820059 3820060 3820061 3820062

B) WIRE ROPE CLIPS – Package of 3

PRICE 0.59/pkg. 0.59/pkg. 0.79/pkg. 0.89/pkg. 0.99/pkg. 1.19/pkg.

Aluminum sleeves that can be used to make eyes or lap stitches in wire rope. Wt. 0.1 lbs.

# of Pieces 10 6 6 4 2

Size 1/8" 3/16" 1/4" 5/16" 3/8" 7/16-1/2"

Wt. (lbs.) 0.1 0.2 0.3 0.4 0.6 1.0

ITEM 3820063 3820064 3820066 3820067 3820068 3820069

PRICE 0.89/pkg. 1.19/pkg. 1.39/pkg. 1.49/pkg. 2.09/pkg. 2.99/pkg.

PACKAGED ROPE

WIRE ROPE SLEEVES

Rope Size 3/32" 1/8" 5/32" 3/16" 1/4"

Live Part

ITEM 3821394 3821402 3821410 3821428 3821436

PRICE 1.99/pkg. 1.99/pkg. 1.99/pkg. 2.99/pkg. 2.69/pkg.

1/4" x 50 FT. NYLON ROPE 8003077 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999 1/4" x 100 FT. NYLON ROPE 99 8003078 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 18 3/8" x 50 FT. NYLON ROPE 99 8003165 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 21 3/8" x 100 FT. NYLON ROPE 99 8003166 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 42

F A R M

PACKAGED ROPE POLYPROPYLENE TWISTED ROPE

Size 1/4" x 50 ft. 1/4" x 100 ft. 3/8" x 50 ft. 3/8" x 100 ft. 3/4" x 50 ft.

Wt. (lbs.) 0.6 1.4 1.4 3.0 5.3

ITEM 8003075 8003076 8003080 8003081 8016390

PRICE 3.49/pkg. 6.49/pkg. 5.99/pkg. 8.99/pkg. 13.99/pkg.

ROPE BY THE FOOT POLYPROPYLENE TWISTED ROPE GOOD GENERAL UTILITY ROPE

• Strong yet lightweight • Resists oil, gas, and most chemicals; rot & mildew • Floats • UV stable • Colour: yellow Wt. 0.1 lbs.

Size

Tensile

Safe ITEM Working Load 1/4" 1,130 lbs. 113 lbs. 3809670 3/8" 2,440 lbs. 244 lbs. 3800168 1/2" 3,700 lbs. 420 lbs. 3809639

PRICE (ft.) 0.06 0.12 0.18

Size

Tensile

Safe ITEM PRICE Working Load (ft.) 1/4" 540 lbs. 54 lbs. 3800171 0.12 1/2" 1,220 lbs. 122 lbs. 3800172 0.35 Eye Snap O’all Size Opening Length 5/8" 3/8" 3-1/4" 3/4" 1/2" 3-3/4" 7/8" 5/8" 4-9/16"

A) SWIVEL EYE TRIGGER

Eye Snap Size Opening 1/2" 1/2"

• Holds knots well and provides firm grip • Resists heat and sunlight • Strong with minimum stretch • Colour: natural tan

B) SWIVEL EYE

SOLID BRONZE SNAP HOOKS A

MANILA ROPE NATURAL FIBRE ROPE – Biodegradable

Wt. (lbs.) 0.1 0.2 0.3

ITEM

PRICE (ea.) 3809506 2.99 3809514 3.69 3809522 4.99

C) SNAP HOOK

O’all Wt. ITEM PRICE Length (lbs.) (ea.) 2-3/8" 0.1 3809498 2.79

Eye Snap O’all Wt. ITEM PRICE Size Opening Length (lbs.) (ea.) 1-1/8" 3/4" 5-1/4" 0.5 3802634 6.99

SNAP HOOKS NICKEL PLATED DOUBLE SWIVEL

Eye Size 3/4"

D NICKEL PLATED D) SWIVEL EYE

E) DOUBLE EYE

O’all Length 4-1/2" 3-1/2"

Wt. (lbs.) 0.1 0.1

ITEM 3801750 3801768

O’all Wt. ITEM PRICE Length (lbs.) (ea.) 2-5/8" 0.1 3801776 1.99

Eye Snap O’all Wt. ITEM PRICE Size Opening Length (lbs.) (ea.) 1/2" 1/4" 3" 0.1 3801719 1.99 5/8" 5/16" 3-1/8" 0.1 3801727 1.99 3/4" 5/16" 3-1/4" 0.1 3801735 2.29 1-1/8" 1/2" 4-1/8" 0.2 3801743 2.69 Snap Opening 3/8" 1/2"

Snap Opening 2-3/8"’

PRICE (ea.) 2.49 2.49

F) SWIVEL EYE SPRING HOOK

Eye Snap O’all Wt. ITEM PRICE Size Opening Length (lbs.) (ea.) 1/2" 1/4" 2-5/8" 0.1 3801784 1.49

SECURITY SNAP LINK HOOK ZINC PLATED

Snap Opening 5/16" 3/8" 3/8" 1/2"

O’all Length 2" 2-3/8" 3-1/4" 3-1/4"

Wt. (lbs.) 0.1 0.1 0.2 0.3

ITEM

PRICE

3802642 3802659 3801800 3801818

0.99/ea. 1.49/ea. 1.69/ea. 1.99/ea.

PANIC SNAP

1/2" x 4". 3800415 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

G) SWIVEL EYE with SPLIT KEY RING

Eye of Snap 5/8"

O’all Length 3-1/2"

Wt. (lbs.) 0.1

ITEM 3801792

PRICE (ea.) 1.99

BULL SNAP

7/8" x 4". 3800413 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

OIL & FUEL TRANSFER PUMPS

• Thermally protected, explosion-proof 1/4 HP motor • Cast iron body construction • Positive displacement, rotary vane configuration • 30-minute duty cycle • Ball bearing construction, no lubrication required • Applications include: diesel fuel, gasoline, kerosene, mineral spirits, solvents, and heptane

A R M

• Flow rate: 13 GPM/49 LPM • 3/4" x 10 ft. hose, 3/4" manual nozzle, and 3 pc.1" poly suction pipe • Newly designed 2" NPT bung adapter and clamp, provides full 360° installation 12 VOLT DC PUMP 2460069 – Wt. 29.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 VOLT AC PUMP 2460070 – Wt. 27.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37999 43999

12 VDC FUEL PUMP with AUTOMATIC FUEL NOZZLE • Flow rate: 10 GPM (38 LPM) • 1/4 HP motor @ 20 amps • Includes 10 ft. hose and 3/4" automatic fuel nozzle 2460071 – Wt. 30.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42999

12 VDC HIGH FLOW FUEL PUMPS

• Built in check valve, bypass valve, and thermal expansion valve • 2" male NPT inlet with bung adapter, 1" female NPT on suction port, 1" female NPT outlet • Can be padlocked 12 VDC HI-FLOW FUEL TRANSFER PUMP

12 VDC HEAVY DUTY FUEL TRANSFER PUMP

• Flow rate: 20 GPM/75.7 LPM • 1" dia., 12 ft. hose, and 1" manual nozzle • 2 pc. telescoping steel suction pipe 2460029 – Wt. 35.4 lbs. . . . . . . . . . . . . . . . . . .

• Flow rate: 15 GPM/57 LPM • 3/4" dia. 12 ft. hose and 3/4" manual nozzle • 2 pc. telescoping steel suction pipe 2460028 – Wt. 34.2 lbs. . . . . . . . . . . . . . . . . . .

48999

41999

115 VAC OIL TRANSFER PUMP Designed for transferring bulk oils and hydraulic fluids: motor oil, gear lube, antifreeze (up to a 50:50 ratio), cutting oils, and most non-corrosive non-flammable petroleum products; even at low temperatures! • 1/2 HP motor with self priming, positive displacement gear pump rated at 4 GPM • Built in bypass valve • Includes 35" x 3/4" suction pipe, 8 ft. x 3/4" hose, nozzle, and bung adapter • Optional filter removes large contaminants when transferring used motor oil 99 8001854 – Wt. 24.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

529

F A R M

FUEL PUMP • 12 VDC • 15 GPM • Cast iron body construction • Flow rate of up to 15 GPM • For use with diesel fuel, gasoline, kerosene, mineral spirits, standard solvent, and heptane 99 8003917 – Wt. 21.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

12/24 VDC TRANSFER PUMP KIT

• Designed for use with kerosene, gear oil, lube oil and diesel fuel • Aluminum pump housing • Complete with hose and spout • 30 min. duty cycle @ 12 volt • 16 amps @ 12 volt, 26 amps @ 24 volt • 7 GPM @ 12 volt, 10.5 GPM @ 24 volt 8008737 – Wt. 22.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FUEL HOSE

FUEL FLOW METER

• Quick reset knob • Large easy to read numbers • Accurate within ± 1% @ 5 to 20 GPM (19 to 76 LPM) • Register total use up to 999.9 litres • O’all dim.: 6" x 5-1/2" x 4-3/4" • 3/4" ports 2460026 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . .

25999

21999

MANUAL FUEL NOZZLE

• Agriculture type hose used for dispensing gasoline, grease, kerosene, and petroleum • Ideal for use with electric pumps • Reinforced with static wire Size Wt. (lbs.) ITEM PRICE 3/4" x 12 ft. 4.2 8001836 29.99 3/4" x 15 ft. 4.6 8001837 34.99 1" x 12 ft. 5.7 8001838 39.99 1" x 15 ft. 6.8 8001839 44.99

AUTOMATIC FUEL NOZZLE

3/4" inlet and outlet. 8000928 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 1" inlet and outlet. 8028724 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

2499 2499

• 3/4" inlet and outlet • Automatic shut-off 2460015 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . .

DOUBLE ACTION PISTON PUMP

• A simple, quick motion transfers petroleum and petroleum-based products; up to 2 pints per stroke. • 2" NPT threaded base with 1" NPT suction inlet • Self-priming delrin piston with integral lip seal • Aluminum body with stainless steel pump liner • 8 ft. hose and non-sparking aluminum nozzle • 1" suction pipe adjusts for 15 to 55 gal. drums • Vacuum breaker prevents siphoning • 20 gallons per 100 strokes 2460027 – Wt. 16.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17999

7499

12V IN-LINE ELECTRIC FUEL PUMP

• Pressure: 5 to 9 PSI, flow: 20 to 30 GPH • Suitable for carbureted 6 to 8 cylinder engines • Provides the needed amount of fuel when demanded • Can be installed with or without present mechanical fuel pump • Complete with fittings, hardware, mounting bracket, instructions • Used in cars, light duty trucks, boats, tractors, and stationary engines with negative ground 99 2460681 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FUEL FILTERS

A R M

BLACK RUBBER FUEL LINE

Wt. 0.1 lbs

I.D. 3/16" 1/4" 5/16" 3/8"

For gasoline and diesel fuel

Wt. 0.1 lbs.

ASSEMBLY with FILTER

10 micron filter removes dirt particles. Wt. 2.4 lbs.

99 /ea. REPLACEMENT FILTER 2460285 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 7.99 ASSEMBLY with WATER ABSORBING FILTER Wt. 2.5 lbs.

2460036 – 3/4" NPT ports. 2461226 – 1" NPT ports. . . . . . . . . . . . . . . . . .

PRICE 0.99/ft. 1.19/ft. 1.39/ft. 1.59/ft.

IN-LINE FUEL FILTERS

• Can be used with fuel containing alcohol • Use both filters in combination for the best possible fuel protection • 150 PSI working pressure • 5 GPM gravity flow, 14 GPM max. flow • Alcohol and impact resistant plastic “see-thru” bowl with drain valve

2460035 – 3/4" NPT ports. 2460277 – 1" NPT ports. . . . . . . . . . . . . . . . . .

ITEM 2461382 2461390 2461408 2461416

3999/ea.

A B C

Mesh 150 180 200

Inlet 1/4" - 5/16" 3/16" 1/4" - 5/16"

ITEM 2460044 2460048 2460045

PRICE 3.99 2.99 3.49

HAND OPERATED PISTON PUMP

REPLACEMENT WATER ABSORBING FILTER 2461234 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 15.99

• Fits 5 and 6 gal. pails as well as 15, 30, and 55 gal. drums • Dispenses 8 oz. per stroke • Can be adjusted to pump 2, 4, or 6 oz. per stroke • Sturdy plastic construction 2461325 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SPIN-ON FUEL FILTERS CELLULOSE FUEL FILTER

• 10 micron • 50 PSI working pressure • 12 GPM max. flow • Filter for dirt, rust, scale, etc. 8038651 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . WATER BLOCK FILTER with 1" NPT PORTS 2460039 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FILLER CAPS

699

• With pressure and vacuum relief • Can be locked with a padlock FITS 2" BUNG

16.99 2461317 – Wt. 1.8 lbs.. . . . . . . . . . . . . . . . . . . . . . FITS 2-1/2" BUNG 2460087 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . .

TOP CAP

2899/ea. 2799/ea.

BUNG NUT

Heavy duty zinc die-cast housing. 3/4" NPT PORTS 2460040 – Wt. 1.6 lbs 1" NPT PORTS 2460041 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . .

1399

/ea.

• Fits 1-1/4" O.D. pipe • 2" NPT threaded end 2460030 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

FUEL PUMPS

A R M A

A) BARREL PUMP

• Designed for fast transfer of lubricants, solvents, and other non-corrosive liquids • Zinc-plated for corrosion resistance • Equipped with self-adjusting telescopic suction tube that pumps contents from 15 to 55 gal. drums • Dispenses a min. of 300 cc of liquid per stroke • Polyethylene piston ring allows pumping of non-corrosive liquids • 2" and 1-1/2" NPT bung nut 99 2460327 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) ROTARY HAND PUMP

B) ROTARY BARREL PUMP

D) CHEMICAL RESISTANT HAND PUMP

• Suitable for many petroleum based products, such as diesel, motor oil, transmission oil and kerosene • 2" threaded bung nut • Telescopic stand pipe • 6 GPM @ 100 RPM • Do not use with water or water based fluids, gasoline, solvents or antifreeze 99 2460057 – Wt. 14.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Suitable for oils, gasoline, kerosene, soluble, corrosive and volatile chemicals, and edible liquids • Chemical resistant pump housing • Stainless steel suction tube and outlet tube • 3-section suction tube with 1-1/2" and 2" bung adapter • Flow: 6 GPM @ 70 RPM 99 8033193 – Wt. 6.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CHEMICAL TRANSFER PUMP

• Visible volumetric pumping chamber • Accurately dispenses one gallon or 4 litres per full stroke • Adapts to barrels, mini bulk tanks and drums • Self priming • Includes telescopic suction pipe • Discharge hose with ball valve and anti-drip spout • For use with: insecticides, crop oil, fungicides, herbicides, motor oil, coolants, hydraulic oil, diesel fuel, mild acids, and water 99 8003915 – Wt. 17.8 lbs. . . . . . . . . . .

429

• Polyphenylene construction • Compatible with oil, water and many water based solutions • Operating temp.: -20° to 80°C (-4° to 175°F) • Do not use with volatile organic chemicals, including most agricultural chemicals • 3 pc. poly suction tube with 2" NPT bung adapter • Flow: approx. 6 GPM @ 70 RPM 99 2460003 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

129

JET PUMPS and ACCESSORIES

D SHALLOW WELL JET PUMPS

• Cast iron pump body is easy to prime • Totally enclosed fan cooled 1/2 HP, 115 volt motor with run capacitor and overload protection • Will lift water to a max. of 25 ft. (max. 60 PSI) Performance Head 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. GPH (US gal.) 715 630 575 500 450

A B

B) PUMP with MOTOR & 6.6 GAL TANK 5770070 – Wt. 41.9 lbs. . . . . . . . . . . . . . . . . . . . C) PUMP with MOTOR 5770077 – Wt. 26.1 lbs. . . . . . . . . . . . . . . . . . . .

A R M

27999 19999

D) CONVERTIBLE JET PUMP WITH EJECTOR

A) 3/4 HP STAINLESS STEEL JET PUMP

• NO PRESSURE SWITCH OR TANK REQUIRED • Stainless steel pump body is easy to prime and has a large capacity • High performance noryl impeller and built in injector • 1" NPT suction discharge • Totally enclosed, fan cooled motor has stainless steel shaft, and is designed for both intermittent and continuous duty operation • Operating pressure: min: 22 PSI, max.: 145 PSI • Max. cap.: 900 GPH 99 8038599 – Wt. 21.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

349

• Shallow well pump (max. 25 ft.) application requires the ejector to be mounted to front of the pump body as shown in picture • DEEP WELL application requires ejector to be set in the well at desired pumping level • Totally enclosed fan cooled 1/2 HP, 115 volt motor with run capacitor and overload protection • Performance: SHALLOW WELL 585 GPH @ 5 ft. head 440 GPH @ 15 ft. head 220 GPH @ 25 ft. head

DEEP WELL 520 GPH @ 30 ft. head 420 GPH @ 40 ft. head 330 GPH @ 50 ft. head 150 GPH @ 70 ft. head

• Max. 60 PSI 5770078 – Wt. 35.7 lbs. . . . . . . . . . . . . . . . . . . .

PRESSURE SWITCHES

24999

BRONZE CHECK VALVES

1 HP/115V or 1.5 HP/230V 1/4" FEMALE THREAD

Preset at 30/50 PSI. 8039909 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2199

• Tapered seat valve • Stainless steel spring • Noise free and chatter proof action

2199

1" VALVE 8038580 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . 1-1/4" VALVE 8038571 – Wt. 1.4 lbs. . . . . . . . . . . . . . . .

1/4" FEMALE THREAD with BARB FITTING

Preset at 20/40 PSI. 5771290 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BRONZE TANK “T”

999 1499

BRASS CHECK VALVE • Made from durable brass for long life • Fits all captive air tanks with bottom discharge 8038526 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• 1" NPT • Use with sump pumps and jet pumps 5770105 – Wt. 0.9 lbs. . . . . . . . . . . . . . . .

1399

ABS CHECK VALVES

PVC FOOT VALVES Size O’all length Wt. (lbs.) 1" NPT 6-1/8" 0.4 1-1/4" NPT 6-1/4" 0.4 1-1/2" NPT 8" 0.8 2" NPT 9" 1.1 3" NPT 12-1/4" 4.2

ITEM 5770019 5770020 8007248 5700009 5770031

PRICE 5.99 6.99 11.99 17.99 49.99

ITEM PRICE 5770062 4.99 5770063 4.99 5770021 6.99 5770022 9.99 5770064 15.99

FIRE HOSE NOZZLE

2" POND STRAINER 5700497 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Size O’all length Wt. (lbs.) 1/2" NPT 3-3/4" 0.3 3/4" NPT 4-1/8" 0.1 1" NPT 5" 0.6 1-1/4" NPT 6" 0.7 2" NPT 7-1/8" 1.3

2999

• Brass housing • 1-1/2" fire hose style nozzle 8004264 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

SUBMERSIBLE SUMP PUMPS

F A R M

A) 1/3 HP

• Plastic housing • Discharge: 1-1/4" dia. • Max. flow: 32 GPM • Shut off: 20 ft. 8021366 – Wt. 9.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

B) 1/2 HP

• Plastic housing • Discharge: 2" dia. • Max. flow: 53 GPM • Shut off: 33 ft. 8021384 – Wt. 13.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12999

• All pumps come equipped with automatic thermal and overload protection • All Burke 1-1/2" NPT discharge pumps come with a 1-1/4" reducer C D E F

GPH @ Head 600 @ 18 ft., 1,400 @ 15 ft. 2,100 @ 10 ft., 2,800 @ 5 ft. 440 @ 18 ft., 1,400 @ 15 ft., 2,100 @ 10 ft., 2,300 @ 5 ft. 300 @ 22 ft., 500 @ 20 ft., 1,600 @ 15 ft. 2,400 @ 10 ft., 3,000 @ 5 ft. 475 @ 25 ft., 1,500 @ 20 ft., 2,300 @ 15 ft. 2,700 @ 10 ft., 3,000 @ 5 ft.

HP 1/3

Features Noryl impeller 1/4 Vert. float switch 1/2 Noryl impeller 1/2 Cast iron body

Outlet Wt. (lbs.) ITEM PRICE 1-1/2" NPT 10.5 8038036 114.99 1-1/2" NPT

10.5

8038090 129.99

1-1/2" NPT

10.8

8038152 139.99

1-1/2" NPT

21.2

8038189 179.99

HEAVY DUTY SUBMERSIBLE SUMP PUMPS

• Ideal for heavy duty use in basements or light commercial applications • 1-1/2" NPT discharge • Handles up to 1/2" solids • Oil filled motor with built in overload protection • Cast iron body G) 1/3 HP

• Performance: 59 GPM @ 5ft, 42 GPM @ 10 ft.,13 GPM @ 15 ft. • 17 ft. shut off 8005747 – Wt. 26.0lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14999

G) 1/2 HP

• Performance: 73 GPM @ 5ft, 60 GPM @ 10 ft., 38 GPM @ 15 ft. • 21 ft. shut off 8005751 – Wt. 28.0 lbs.

19999

SEWAGE and EFFLUENT PUMPS

• Outlet: 2" NPT • Cast iron body, vortex noryl impeller

H) 1/3 HP EFFLUENT PUMP

• GPH @ head: 1,260 @ 15 ft., • 3,060 @ 10 ft., 3,600 @ 5 ft. • Can handle 1-1/2" solids 8038223 – Wt. 23.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19999

I) 1/2 HP SEWAGE PUMP

• GPH @ head: 720 @ 15 ft., 3,120 @ 10 ft., 4,500 @ 5 ft. • Can handle 2" solids 8038205 – Wt. 28.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23999

1/4 HP UTILITY PUMP

1/4 HP SUBMERSIBLE WATER PUMP

• 1-1/4" discharge • Noryl impeller • Thermal and overload protection • 400 @ 15 ft., 960 @ 10 ft., 1,200@ 5 ft. 8037652 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

F A R M

11499

• 115 volt • 1,260 GPH max. • Includes 3 adapters: 1/2", 3/4" and 1"

5770096 – Wt. 8.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

8499

12 VDC SUBMERSIBLE PUMP • Compact centrifugal pump • Inlet must be at or below level of liquid pumped • Pumps up to 339 GPH, draws only 1.0 to 1.5 amps @ 12 VDC • Outlet has 3/8" male pipe fitting and accepts 5/8" I.D. hose • O’all dim.: 2" x 2" x 5", incl. outlet and feet • 1/4" mounting slots 99 5771449 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1/4" SUMP PUMP DISCHARGE HOSE KIT

MECHANICAL FLOAT SWITCHES Both switches rated 115 VAC, 15 amps. • Use with submersible sump pumps • Designed to remove water from basin 5770124 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . • Universal piggy back type • Designed to maintain water level 8038385 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499 34

• 1-1/4" x 20 ft. sump pump drain hose kit • Includes adapter and clamp 8038535 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

SUBMERSIBLE WATER PUMPS A) HEAVY DUTY SUBMERSIBLE WATER PUMP

• The “Tornado” is designed for underwater use, but can be adapted to garden hose attachments • Pumping over 1,000 GPH, it gets the job done fast • Inlet: 3/4" pipe I.D.; outlet: hose connection • Capacity: 1,100 GPH @ 2 ft. head, 950 GPH @ 10 ft. head, 250 GPH @ 25 ft. head • 115V, 45 A 390W 99 5771480 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

169

B) SUBMERSIBLE WATER PUMPS

• Strainer attaches for submersible use • Complete with 5 ft. 3-prong plug B

Gallons per hour 1 ft. 3 ft. 5 ft. Shut off (ft.) Inlet Outlet Wt. (lbs.) SKU PRICE 180 140 100 8 1/2" 5/16" 4.1 5770185 79.99 500 360 300 11 3/4" 3/8" 4.9 5771738 89.99

GUZZLER PUMPS • Small stones and slurry can pass through guzzler without hampering use • Capable of 12 ft. suction lift & a 12 ft. delivery head Cap. 10 GPM 15 GPM

O’all dim. (L x W x H) 10" x 5" x 4" 10" x 5" x 4"

Hose size 1" 1-1/2"

Wt. (lbs.) 0.4 2.2

ITEM

PRICE

5770029 5770227

69.99 79.99

F A R M

“PONY” PUMPS

A B

• The handy little pumps for homeowners, RV owners, boaters, ranchers, campers, A) 110 VOLT 99 and contractors 5771233 . . . . . . . . B) 12 VOLT • Chrome-plated brass body 5771431 . . . . . . . . • Continuous duty motor • Flexible nitrite impeller, compounded for long life • Use with fresh or sea water from 4°C to 60°C (40°F to 140°F) • Extra impeller and gasket included • Dual ports have 3/4" external garden hose thread and 3/8" NPT internal thread

129

11999

Model

Gallons per hour Shut off O’all dim. Load Wt. (ft.) (lbs.) 1 ft. 5 ft. 10 ft. 20 ft. 40 ft. A 110 VAC 360 342 300 270 90 48.3 6-1/8" x 3-3/8" x 3-3/8" 1.75 amps/360 GPH 5.0 B 12 VDC 300 258 240 202 90 46.0 6-3/4" x 3" x 3-1/8" 7 amps/300 GPH 4.1 REPAIR KIT

Includes impeller and gasket. 5771456 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2399

REPLACEMENT IMPELLER 5771746 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.49

CONVERSION KIT

Converts pump for use with very hot water, fertilizers, other liquids, light oils, and antifreeze. Includes: 2 “Viton” seals and 2 “Hydrin” impellers that will not swell. 5771241 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3399

BILGE PUMP • Fully submersible • Inlet at bottom • Cap. approx. 1 GPM • Use 3/8" I.D. discharge hose • Operates on 4.5 to 12 VDC, batteries or transformer • Can be used in aquariums, fountains, boats, etc. • O’all dim.: 1-1/4" x 2" x 3-1/2" 4270013 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2199

SELF-LUBRICATING GEAR PUMPS • Stainless steel gears and shaft • Casted bronze bodies and covers • Replaceable oil impregnated bronze bearings • 5/8" stainless steel shafts • Pumps may be operated in either direction • 100 PSI max. pressure, 1,800 RPM max Port Size 1/2" NPT 3/4" NPT 1" NPT

Max. GPM @ 1,800 RPM @ 0/100 PSI 10.3 / 5.0 14.3 / 10.0 17.0 / 10.5

Required HP Wt. ITEM PRICE @ 0/100 PSI (lbs.) 1/3 / 1 6.3 8038312 109.99 1/3 / 1-1/2 6.0 8038330 114.99 1/2 / 2 6.6 8038349 119.99

SELF-PRIMING DRILL PUMP

SELF-PRIMING PUMP

• Attaches to 1/4" or 3/8" electric drill • Self-priming 8 ft. to 10 ft. • Empties aquariums, water beds, household appliances, crankcase motor oil, etc. • 5°C - 80°C (41°F to 176°F) temp. range • Pumps 240 GPH 5770771 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 5/16" shaft • Metal housing • Pumps up to 660 GPH • Max. head 100 ft. • Self-priming to 15-1/2" • 3/4" garden hose inlet and outlet • O’all dim.: 4-1/4" x 3" x 4" 5770250 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

1999

DRUM & BARREL FAUCET

2" SEWAGE CHECK VALVE

• Self-closing nylon seat • 3/4" male thread 5718499 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1049

BRASS “JIGGLER” SIPHON

• Black ABS housing • Includes: 1 check valve with 2" dia. ports, two 2-3/8" rubberized vinyl sleeves to fit 2" i.d. tubing, 4 stainless steel screws and 4 stainless steel hose clamps 99 8005045 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A R M

BALL VALVES • 3/4" x 6-1/2 ft. anti-static hose • Rapidly move brass valve up and down to start fluid flow • WARNING: NOT FOR SIPHONING FUEL 2460065 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

849

BALL VALVES • Forged brass • Female pipe thread on both ends Working Pressure Size (1) (2) Wt. (lbs.) 1/4" 600 PSI 150 PSI 0.2 3/8" 600 PSI 150 PSI 0.3 1/2" 600 PSI 150 PSI 0.5 3/4" 600 PSI 150 PSI 0.6 1" 500 PSI 150 PSI 1.1 1-1/4" 500 PSI 150 PSI 1.9 1-1/2" 500 PSI 150 PSI 0.5 2" 500 PSI 150 PSI 3.7 (1) Water, oil, and gas (2) Steam

• PVC construction • Max. pressure: 150 PSI • For water and oil use • Not to be used with gas or steam Port size Wt. (lbs.) ITEM 1/2" 0.2 5770032 3/4" 0.2 5770033 1" 0.4 5770034 1-1/4" 0.8 5770035 1-1/2" 1.0 5770036 2" 1.3 5770038

PRICE 4.49 4.49 5.49 7.49 9.49 11.99

GATE VALVES ITEM 5710149 5710150 5715271 5715289 5715297 5715305 5715313 5715321

PRICE 3.99 4.99 4.99 6.99 10.99 14.99 19.99 28.99

• Casted brass • For water and oil use • Female pipe thread on both ends • Working pressure: 100 PSI • Not for use with gas or steam Size 1/2" 3/4" 1" 2"

Wt. (lbs.) 0.5 0.7 1.0 2.8

ITEM 5713060 5713078 5713086 5710180

PRICE 6.49 7.49 8.49 17.99

CAM-LOCK QUICK-CONNECT COUPLINGS • Working pressure: 100 PSI @ -32°C (0°F), • Quickly connect/disconnect hoses • Rustproof 125 PSI @ 21°C (70°F), • Stainless steel pins and rings • Made of polypropylene 70 PSI @ 66°C (150°F) • Resistant to many chemicals • Nylon levers

COUPLERS MALE NPT THREAD

Size 3/4" 1" 1-1/2" 2" 3"

Wt. (lbs.) 0.2 0.2 0.5 0.6 1.1

HOSE BARB

ITEM PRICE Wt. (lbs.) 5700024 8.99 0.2 5700025 9.99 0.2 5700182 11.99 0.5 5700190 13.99 0.6 8029180 24.99 1.4

FEMALE NPT THREAD

ITEM PRICE 5700028 8.99 5700029 9.99 5700240 11.99 5700257 12.99 5700265 23.99

Wt. (lbs.) 0.2 0.2 0.5 0.6 1.1

ITEM PRICE 5700031 8.99 5700032 9.99 5700216 11.99 5700224 13.99 8029206 24.99

ADAPTERS MALE NPT THREAD

Size 3/4" 1" 1-1/2" 2" 3"

Wt. (lbs.) 0.1 0.1 0.2 0.2 0.5

HOSE BARB

ITEM PRICE Wt. (lbs.) 5700038 3.99 0.1 5700039 4.99 0.1 5700307 4.99 0.1 5700315 5.99 0.2 8030659 16.99 0.8

FEMALE NPT THREAD

ITEM PRICE 5700035 3.99 5700036 4.99 5700273 4.99 5700281 5.99 5700299 16.99

Wt. (lbs.) 0.1 0.1 0.2 0.3 0.5

ITEM PRICE 5700021 3.99 5700022 3.99 5700158 4.99 5700166 4.99 5700174 12.99

2" ALUMINUM CAM-LOCK COUPLERS

A R M

90° CAM-LOCK COUPLING

2" NPT male thread.

1899 899

Type Wt. (lbs.) Female NPT thread coupler 0.9 Male NPT thread coupler 0.8 Hose barb coupler 1.0 Female NPT adapter 0.3 Male NPT adapter 0.5 Hose barb adapter 0.6

CONNECTORS

ITEM 5700013 5700017 5700014 5700016 5700019 5700015

PRICE 15.99 14.99 15.99 8.99 9.99 9.99

I) GARDEN HOSE CONNECTOR

1/2" NPT male x male garden hose. J 5710131 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

249

J) SWIVEL CONNECTOR

1/2" NPT male x female garden hose. 5790290 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

319

STAINLESS STEEL HOSE CLAMPS • All stainless steel construction • Max. corrosion resistance Size 5/8" 1" 1-1/2" 2" 2-1/4"

Size Range 9/16" to 1-1/16" 11/16" to 1-1/2" 1-1/16" to 2" 1-9/16" to 2-1/2" 1-13/16" to 2-3/4"

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1

ITEM 5714977 5714985 5714993 5715008 5715016

PRICE 0.85/ea. 0.89/ea. 1.09/ea. 1.09/ea. 1.09/ea.

HOSE CLAMPS • Not for underground applications • Stainless steel and carbon steel construction

Size Range 7/32" to 5/8" 5/16" to 7/8" 9/16" to 1-1/16" 9/16" to 1-1/4" 11/16" to 1-1/2" 3/4" to 1-3/4" 1-1/16" to 2" 1-5/16" to 2-1/4" 1-9/16" to 2-1/2" 1-13/16" to 2-3/4" 2-5/16" to 3-1/4" 2-13/16" to 3-3/4" 2-1/2" to 4-1/2" 4" to 6" 5" to 7"

ITEM 5714829 5714837 5714845 5714852 5714860 5714878 5714886 5714894 5714902 5714910 5714928 5714936 5714944 5714951 5714969

GARDEN HOSE QUICK COUPLERS Heavy duty coupler and nipple is made of brass and stainless steel. 5710050 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . Male nipple ONLY. 5710049 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . .

749 399

PVC UNIONS • Provides a “quick disconnect” that allows easy removal of a hose from a pump or addition/removal of an extra length of hose • Female NPT threads on both ends • Centre of union nut couples the 2 ends together and seals with an EPDM O-ring Size Wt. (lbs.) 3/4" NPT 0.2 1" NPT 0.3 1-1/4" NPT 0.4 1-1/2" NPT 0.7

ITEM PRICE 5770040 4.49 5770041 6.49 5770042 7.49 5770043 9.49

SNAPPER HOSE CLAMPS Size Range Wt. (lbs.) 0.307" - 0.342" 0.1 0.351" - 0.394" 0.3 0.404" - 0.452" 0.1 0.513" - 0.586" 0.1 0.616" - 0.707" 0.1

ITEM 5710059 5710060 5710061 5710064 5710067

PRICE 0.49/ea. 0.49/ea. 0.49/ea. 0.59/ea. 0.59/ea.

HOSE-O-CLAMPS

Wt. 0.1 lbs

Size 7/16" 3/8" 5/8" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/4" 2-3/4" 3-1/4" 3-1/2" 5" 6-1/2"

G) COUPLING 5700372 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . H) ADAPTER 5700364 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . .

A B C D E F

PRICE 0.45/ea. 0.45/ea. 0.49/ea. 0.49/ea. 0.54/ea. 0.54/ea. 0.54/ea. 0.59/ea. 0.59/ea. 0.59/ea. 0.59/ea. 0.79/ea. 0.89/ea. 0.99/ea. 1.19/ea.

12 PC ASSORTED HOSE CLAMPS 5710200 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

5 pack Hose Wt. (lbs.) ITEM PRICE 1/2" O.D. 0.1 5714308 1.89/pkg. 9/16" O.D. 0.1 5714316 1.99/pkg. 5/8" O.D. 0.1 5714324 2.09/pkg.

HOSE CLAMP SCREWDRIVER

• Fits 5/16" hex head • Flexible shank to reach difficult spots • O’all length: 10-1/2" 2970198 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . .

699

PVC DISCHARGE HOSE BY THE FOOT

LOW PRESSURE LIQUID FILLED GAUGES

• 75 PSI • Rolls up flat for easy storage Size 1-1/2" I.D. 2" I.D. 3" I.D.

Wt. (lbs.) 0.1 0.2 0.3

ITEM 5710093 5714555 5715974

PRICE 0.69/ft. 0.99/ft. 1.49/ft.

1/2" x 50 FT PVC HOSE

• Stainless steel construction • 2-1/2" dia. aluminum dial • Scale shows PSI and kPa (kilopascal) Pressure Range kPa Wt. (lbs.) ITEM 0 - 30 PSI 0 - 210 0.5 8002833 0 - 60 PSI 0 - 400 0.5 8002834 0 - 100 PSI 0 - 700 0.5 8002835 0 - 200 PSI 0 - 1,400 0.5 8002838 0 - 300 PSI 0 - 2,100 0.5 8002836 0 - 600 PSI 0 - 4,000 0.5 8002837

PRICE 14.99 14.99 14.99 14.99 14.99 14.99

A R M

2" AIR/WATER GAUGES • Blue PVC water hose • Heavy duty machined brass hose fittings • 30% lighter than rubber hose • Chemical resistant 5710328 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Metal back • 2" dia. • 1/4" NPT brass connection • Reads: 0 to 160 PSI, 0-11 kg/cm2

1999

BRAIDED HOSE

Pressure Working 140 PSI 140 PSI 112 PSI 84 PSI 70 PSI 42 PSI

Bursting

ITEM

PRICE

700 PSI 700 PSI 490 PSI 420 PSI 280 PSI 170 PSI

8040292 8040309 8040318 8040327 8040336 8040345

0.29/ft. 0.49/ft. 0.69/ft. 1.49/ft. 1.59/ft. 1.99/ft.

CLEAR VINYL TUBING BY THE FOOT Working Pressure 50 PSI 50 PSI 50 PSI 50 PSI 40 PSI 25 PSI 25 PSI

• Will not collapse of flatten under suction • Temperature range: -23° to 40°C (-10° to 104°F) • Hose is abrasion and ozone resistant, non-rotting, and mildew proof Size 1-1/2" 2" 3"

Working Pressure 90 PSI 70 PSI 60 PSI

Wt. (lbs.) 1.0 0.6 1.1

ITEM

PRICE

5700331 5700349 5700356

1.89/ft. 1.99/ft. 3.19/ft.

CLEAR VINYL TUBING

Wt. 0.5 lbs.

Inside Dia. 1/8" 1/4" 5/16" 3/8" 1/2" 3/4" 1"

699 699

SUCTION HOSE BY THE FOOT

Use for water supply and drainage on machines and equipment. Inside Dia. 1/4" 3/8" 1/2" 3/4" 1" 1-1/4"

BOTTOM MOUNT 0430385 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . BACK MOUNT 0430386 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Bursting Pressure 200 PSI 200 PSI 200 PSI 200 PSI 150 PSI 100 PSI 100 PSI

ITEM

PRICE

8040247 8040096 8040265 8040201 8040210 8040229 8040238

0.19/ft. 0.19/ft. 0.29/ft. 0.29/ft. 0.39/ft. 0.59/ft. 0.69/ft.

• 10 ft. long • Lightweight and flexible • Oil, heat, and acid resistant Inside Outside Wt. Dia. Dia. (lbs.) 1/8" 3/16" 0.3 1/4" 3/8" 0.4 5/16" 7/16" 0.4 3/8" 9/16" 0.5 1/2" 5/8" 0.6

ITEM

PRICE

5710219 5710220 5710221 5710222 5710224

3.99 4.49 5.49 5.99 6.99

GARDEN HOSE COUPLERS

Wt. 0.1 lbs. FEMALE

Size 3/8" 1/2" 5/8" 3/4"

ITEM 8021188 8021197 8021213 8021231

MALE

PRICE 3.49 3.49 3.49 3.49

ITEM 8021259 8021268 8021277 8021286

PRICE 3.49 3.49 3.49 3.49

FITTINGS

F A R M

STANDARD BLACK MALLEABLE PIPE FITTINGS

90°ELBOW

Size NPT 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

45° ELBOW

STRAIGHT TEE

CROSS

ITEM PRICE ITEM PRICE ITEM PRICE ITEM PRICE ITEM PRICE ITEM PRICE 5710171 5713433 5713441 – 5713466 – 5714068 5714076

1.79 1.79 0.99 – 2.19 – 3.99 5.29

5712989 5713482 5713490 5713508 – – – –

COUPLING

Size NPT 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

90° STREET ELBOW

1.99 1.99 1.49 1.99 – – – –

PLUG

ITEM PRICE ITEM PRICE 5712997 5713730 5713748 5713755 5713763 5713771 5714100 5714118

1.69 1.69 1.49 1.79 2.49 3.19 3.89 5.79

5710172 5713532 5713540 5713557 5713565 5713573 – –

5713003 5713789 5713797 5713805 5713813 5713821 – –

0.99 0.79 0.79 1.49 1.69 1.59 – –

2.29 – – 5710173 2.09 2.29 5713581 2.49 5713631 2.29 1.49 5713599 2.49 5713649 1.49 2.29 5713607 3.29 5713656 1.89 2.99 – – 5713664 3.49 4.49 – – 5713672 4.99 – – – – – – – – – –

SHORT

5710174 5713680 5713698 5713706 – – – –

3" LONG

5.49 5.79 4.99 5.79 – – – –

HEX CAP

ITEM PRICE ITEM PRICE ITEM PRICE ITEM PRICE 5710175 5713839 5714407 5714449 5714670 5714688 5714167 5714175

1.29 1.29 0.99 1.19 1.39 1.59 1.99 2.49

– 5710324 5714415 5714464 5714696 5714712 5714183 5714191

– 1.49 0.99 1.19 1.49 1.79 1.99 2.69

5713011 5714399 5714431 5714480 5714704 5714720 5714209 5714217

1.49 5713045 0.79 1.59 – – 1.29 – – 1.19 – – 1.69 – – 1.99 – – 2.39 – – 2.79 – –

NIPPLES

HEX BUSHING REDUCER

Size (NPT) 1/4" x 1/8" 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 3/8" 3/4" x 1/2" 1" x 3/4" 1-1/4" x 1/2" 1-1/4" x 1" 1-1/2" x 1" 2" x 1-1/4" 2" x 1-1/2"

COUPLER REDUCER

90° REDUCING ELBOW

ITEM PRICE ITEM PRICE ITEM PRICE 5710176 1.69 – – – – 5710177 1.69 5713896 1.69 5713847 2.49 5714506 1.19 – – – – 5713953 1.29 5713904 1.59 5713854 1.89 5714498 1.39 – – – – 5713961 1.39 5713912 1.69 5713862 2.19 5713979 1.89 5713920 2.59 – – – – 5714134 3.29 – – 5713987 2.49 5713938 3.49 – – 5714126 3.49 – – – – 5714142 3.89 – – – – 5714159 3.89 – – – –

1/4" NPT. 1-1/2" LONG NIPPLE 5710327 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . 6" LONG NIPPLE 5713029 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . .

129 229

GALVANIZED INSERT PIPE FITTINGS

Size 1/2" 3/4" 1" 1-1/4" 2"

ITEM 5712195 5712203 5712211 5712229 5712245

PRICE 1.69 1.99 2.49 3.29 4.99

PLASTIC INSERT FITTINGS

ELBOW

Size

1-1/4" 1-1/2" 2"

Wt. (lbs.) 0.1 0.1 0.2

MALE ADAPTER NPT male thread.

FITTING

PRICE ITEM 5700067 5700075 5700083

0.99 1.29 1.89

Wt. (lbs.) 0.1 0.1 0.2

ITEM

PRICE

5700000 5700018 5700026

0.69 0.89 1.39

Wt. (lbs.) 0.1 0.1 0.1

ITEM

PRICE

5700034 5700042 5700059

0.69 0.79 1.39

PVC FITTINGS ELBOWS

90° TEE

Wt. 0.1 lbs.

Size (NPT) (female x male) 1/2" x 1/2" 3/4" x 3/4"

ITEM

PRICE

5710281 5710282

3.49 3.49

Wt. 0.1 lbs.

Size (NPT) ITEM PRICE (female) 1/2" x 1/2" x 1/2" 5710284 4.49

Wt. 0.1 lbs.

79¢

5710299 . . . . . . . . . . .

A R M

HEX PLUGS

CONNECTORS and ELBOWS

Wt. 0.1 lbs.

Size (male x hose barb) 3/8" NPT x 1/2" 1/2" NPT x 3/8" 1/2" NPT x 1/2" 3/4" NPT x 1/2" 3/4" NPT x 3/4"

ITEM PRICE ITEM PRICE 5710275 1.49 – – 5710276 1.49 – – 5710277 1.49 5710273 0.89 5710278 1.49 5710274 0.99 5710279 1.79 – –

HOSE MENDERS and ELBOWS

Size 1/4" male NPT 3/8" male NPT 1/2" male NPT 3/4" male NPT 1" male NPT

ITEM 5710247 5710248 5710307 5710251 5710252

PRICE 0.99 0.79 0.79 0.99 0.99

TEES Wt. 0.1 lbs.

Wt. 0.1 lbs.

Size (hose barb) 1/4" x 1/4" 3/8" x 3/8" 1/2" x 3/8" 1/2" x 1/2" 5/8" x 5/8" 3/4" x 3/4"

FEMALE GARDEN HOSE CAP

ITEM 5710253 5710254 5710285 5710255 5710257 5710258

PRICE 0.99 1.39 1.59 1.29 0.99 1.49

ITEM 5710259 5710260 – 5710261 5710262 5710263

PRICE 0.69 0.79 – 0.89 0.99 0.99

CONNECTORS and COUPLINGS

Size (hose barbs) 1/4" x 1/4" x 1/4" 3/8" x 3/8" x 3/8" 3/8"* x 1/2" x 1/2" 1/2" x 1/2" x 1/2" 5/8" x 5/8" x 5/8" 3/4" x 3/4" x 3/4" * centre barb

ITEM PRICE 5710266 1.99 5710267 1.79 5710286 1.99 5710268 2.49 5710269 2.49 5710270 2.99

REDUCER BUSHINGS Wt. 0.5 lbs.

Wt. 0.1 lbs.

Size 3/8" x 1/4" NPT 3/8" x 3/8" NPT 1/2" x 3/8" NPT 1/2" x 1/2" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 1" x 1" NPT 1-1/2" x 1-1/2" NPT

MALE THREADS

FEMALE THREADS

ITEM PRICE 5710293 0.79 5710289 0.79 5710294 0.79 5710290 0.79 5710295 0.99 5710291 0.89 5710292 1.49 – –

ITEM – – – 5710241 – 5710242 – 5710245

PRICE – – – 2.99 – 3.49 – 7.99

MISSING

Size (NPT) (male x female) 3/8" x 1/8" 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 3/8" 3/4" x 1/2" 1" x 3/4" 1-1/4" x 1" 1-1/2" x 1" 1-1/2" x 1-1/4" 2" x 1-1/2"

Have you seen this child?

Dwayne Ross Date of Birth: March 26, 1985 Height: 5 ft. 9" Weight: 160 lbs. Hair Colour: Black Eye Colour: Brown Missing From: Thompson, Manitoba Missing Since: October 1, 2003

ITEM

PRICE

5710227 5710228 5710229 5710230 5710232 5710233 5710234 5710235 5710236 5710237 5710238

1.69 1.69 1.69 1.69 1.69 0.79 1.49 2.99 2.99 2.99 2.79

1-800-387-7962 to report on a missing child anywhere in Canada All calls confidential No name required. A missing child is everyone's responsibility.

FANS

F A R M

VENTILATING FANS • Ideal for barns, shops, garages, and greenhouses • Provides moisture and temperature control and continuous ventilation • MOTOR: totally enclosed, ball bearing with thermal overload protection • FAN BLADE: heavy gauge aluminum, well balanced • HOUSING BOX: rugged steel welded construction with enamel finish • MOTOR MOUNT: heavy welded steel rod • SHUTTER: aluminum louvers supported by long life nylon bearings Blade HP Free Air Opening Shipping ITEM PRICE Dia. CFM Needed Wt. (lbs.) 12" 1/4 1,640 15" x 15" 26.1 0772301 189.99 16" 1/4 2,370 19" x 19" 31.2 0772202 209.99 18" 1/3 3,200 21" x 21" 37.3 0772343 219.99 20" 1/3 3,420 23" x 23" 41.3 0772210 249.99 24" 1/3 4,255 27" x 27" 45.7 0772541 269.99 THERMOSTAT

For use with above single speed fans. 0770917 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5999

2-SPEED VENTILATING FANS Blade Dia. 8" 10" 18"

Free Air CFM 1/20 360/300 1/20 690/580 1/3 3,200/2,100

Opening Shipping ITEM Needed Wt. (lbs.) 11" x 11" 11.4 0771253 13" x 13" 13.2 0772384 21" x 21" 36.4 0772657

PRICE 119.99 124.99 289.99

2-SPEED SWITCH

• For use with 8", 10", and 18" 2-speed fans • SPDT 0772632 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1699

FAN BLADES

AUTOMATIC SHUTTERS

• Aluminum blades • Steel spider and hubs, cadmium plated, socket setscrews • Clockwise rotation Dia. # of Blades Bore Wt. (lbs.) ITEM PRICE 8" 5 5/16" 0.2 0770035 8.99 10" 5 5/16" 0.2 0770036 10.99 12" 3 1/2" 0.2 0770037 18.99 16" 3 1/2" 1.1 0770271 22.99 18" 3 1/2" 2.1 0770289 27.99

• Ideal for use in shops, barns, greenhouses, garages, sheds • Can be controlled remotely with an extension • Weatherproof tie-rod shutters – gravity closes shutters when fan is stopped • Automatically opens when fan starts Fan Shutters Frame Wt. ITEM Size (lbs.) 20" 20" x 20" 22" x 22" 9.0 0770057 16" 16" x 16" 18" x 18" 6.4 0770875 12" 12" x 12" 15" x 15" 4.1 0772061

PRICE 74.99 64.99 49.99

How do you know what fan is right for you?

To determine the proper fan for your application, use the following formula:

Number of cubic feet in room Number of minutes per air change

= Required CFM capacity

Application

Assembly Hall Auditorium Bakery Barber Shop Basement Bathroom Battery Room Bedroom Boiler Room Bowling Alley Church Classroom Cocktail Bar Corridor Dairy

Minutes per Air Change 7 10 3 6 8 3 4 4 1 5 15 5 3 10 4

Department Store Dry Cleaning Engine Room Forge Room Foundry Garage General Office Gymnasium Hospital Hotel Room Kitchen Laundry Lobby Locker Room

Minutes per Air Change 6 5 6 3 4 5 10 8 8 3 2 2 8 3

Machine Shop Meeting Room Pressing Room Private Office Projection Booth Restaurant School Store Summer Cooling Tavern Theater Toilet Transformer Room Warehouse

Minutes per Air Change 8 2 1 3 2 6 7 8 1 3 5 3 1 12

HEATING AND VENT FANS SAVE ON FUEL! • Improves performance of forced air heating or cooling system • Use as an exhaust fan in restaurants, poultry houses, attics, etc. mounted in a section of pipe as shown • 120 VAC Size Speed Max. CFM Wt. (lbs.) 4" 1 80 CFM 2.5 5" 1 225 CFM 1.7 6" 1 250 CFM 2.4 6" 2 300 CFM 1.2 8" 1 500 CFM 3.2 10" 1 650 CFM 4.5 12" 1 800 CFM 5.6

ADJUSTABLE DUCT BOOSTER FAN

• Fits 6" to 8" pipe • Comes with 2 blades • 120 VAC 40 watt • 150 CFM free air flow 0772822 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

2699

ITEM 0770134 0770145 0772871 0770071 0772889 0772897 0772905

PRICE 39.99 39.99 42.99 44.99 49.99 55.99 59.99

F A R M

ZONE CONTROL DAMPERS

PLUG-IN THERMOSTAT • Designed for use with duct fans for winter heating or summer cooling applications • Mounts between duct fan and register • Mounts in round or rectangular ducts • Duct fan plugs into thermostat and thermostat is plugged into a 110 volt grounded household outlet (10 amp rating) • 6 ft. cord 0770061 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Installs in duct to control temperature of an unused room • Ideal energy saver • Transformer included 5" DAMPER 8028038 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

5999

8499 6" DAMPER 99 8027949 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 89

INDUSTRIAL DUTY CEILING FAN These fans are designed for both winter and summer use.

56" MODEL

Operates forward or reverse

IN WINTER

Warm air rising from your heating system is pushed down, reducing heating costs. IN SUMMER

• The fan creates air movement which cools the room • Fan is aerodynamically designed to achieve max. air delivery while consuming very little power • Totally enclosed motor to ensure long life and quiet operation • All metal construction finished in white baked enamel HIGH/LOW SPEED CONTROL RHEOSTAT SPEED CONTROLS Wt. 0.3 lbs.

0771444 – Regulates one fan . . . . . . . . . . . . . . . . 14.99 0770149 – Regulates up to 4 fans . . . . . . . . . . . 24.99 .

Blade Dia. Down Rod CFM 36" 12" 7,100 56" 10" 20,500

Coverage 600 sq. ft. 1,200-1,500 sq. ft.

• Controls up to 4 fans • High/low and forward/reverse switch • For use with 36" and 56" ceiling fans 8007178 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . RPM Amps 380 0.7 310 0.95

Shp. Wt. (lbs.) 11.4 16.3

3999

ITEM 0771113 0771733

PRICE 49.99 54.99

• 1/2 HP totally enclosed electric motor • 115/230 volt, 6.4/3.2 full load amps • Galvanized frame • Wire mesh guard mounted front and back • Balanced, 3-blade fan • O’all dim.: 40" x 40" x 16" 0770048 – Wt. 123.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38999

36" GALVANIZED BOX FAN

11,100 CFM MAX.

F A R M

PORTABLE FANS

30" DIA FAN

• Ideal for shops, assembly lines, patios, porches, or anywhere air movement is required • Specially designed for quiet operation • 1/4 HP (2-stage), 115 volt, 3.8 amp motor • 8,200/6,600 CFM • 8" wheel dia. • O’all dim.: 32"W x 34"H x 14"D 0770054 – Wt. 72.0 lbs. . . . . . . . . . . . . . . . . . . . . .

36999

36" DIA FAN

• Excellent for use in small shops, warehouses, spot cooling on assembly lines, barns, etc. • Specially designed for quiet operation • 1/4 HP, 115 volt, 6.4 amp motor • 10,900 CFM • 8" wheel dia. • O’all dim.: 39"W x 41"H x 18"D 99 0770049 – Wt. 114.0 lbs. . . . . . . . . . . . . . . . . . . .

569

42" DIA FAN

• Designed for cooling and ventilating large areas in factories, machine shops, warehouses, gymnasiums • Belt driven fans turn slower than direct drive fans meaning quieter air movement • 1/2 HP (2-stage) 115V, 7.3 amp motor • 14,400/9,600 CFM • 8" wheels • O’all dim.: 44"W x 45"H x 27"D 99 0770055 – Wt. 124.0.0 . . . . . . . . . . . . . . . . . . . . .

699

ELECTRICAL 5,000 WATT GENERATOR

5,000 WATT BELT DRIVE GENERATOR W G

120V-15A

X G W

W G

240V-15A

120V-15A

• Can be run by a gas engine • Must run at 3,600 RPM for proper power output • 7/8" shaft, with 3/16" keyway • 4,000 watts continuous, 5,000 watts max. • 120/240 V • Requires an 8 HP gas engine 99 0740126 – Wt. 53.5 lbs. . . . . . . . . . . . . . . . . . . . . .

499

• 10 HP Briggs & Stratton OHV gas engine • Max. watts: 6,250W • Continuous running watts: 5,000W • 5 gallon tank provides up to 11 hours run time @ 50% load • Control panel with two 120V and one 120/240 twistlock outlet • Low oil alert 99 8002661 – Wt. 144.0 lbs. . . . . . . . . . . . . . . . . .

1049

10,000 WATT GENERATOR • With roll cage and 8 gallon fuel tank • All copper windings • Totally brushless design • Sealed ball bearings • Waterproof enclosure • Class F & H insulation 120V-15A • High surge capacity • Circuit breakers standard • Solid state engine ignition 120V-15A • Revolving field construction • Installed rubber vibration mounts • Electric start • 9,500 watts continuous, 10,000 watts max. • 120/240 V, 79.2/39.6 amps • O’all dim.: 30"L x 24"W x 25"H 0740004 – Wt. 250.0 lbs. . . . . . . . . . . . . . . . . . . . . W G

W G

BATTERY NOT INCLUDED 250V-50A X

G W G

120V-15A

125/250V-30A W

W G

120V-15A

279999

120V

ELECTRIC MOTORS

Farm Duty / Industrial Electric

Compressor Motors

General Purpose Motors

A R M

Kohlbach Motors Ltd. has established itself as one of Latin America's largest manufacturers of electric motors since 1945. Developing key features like 1.15 service factor, manual reset overload, ball bearings, continuous duty, and capacitor start add to the proven quality of the Kohlbach motor. It is through this continued pursuit of superior quality that allow Kohlbach Motors Ltd. to export their products to over 20 countries. FARM DUTY / INDUSTRIAL ELECTRIC – Continuous duty, manual overload, single phase, ball bearings.

RPM

Volts

1/2 3/4 1 1-1/2 3 5 10

1,735 1,740 1,760 1,745 1,760 1,725 1,745

115 / 208-230 115 / 208-230 115 / 208-230 115 / 208-230 208-230 / 460 208-230 / 460 208-230 / 460

Full Load Amps Shaft @ Voltage Breakdown Size 8.4 / 4.1-4.2 5/8" 11.2 / 5.8-5.6 5/8" 11.2 / 5.8-5.6 5/8" 14.4 / 8.0-7.2 5/8" 15.4-14.2 / 7.1 1-1/8" 28.6-24.5 / 12.2 1-1/8" 52.8-48.0 / 24.0 1-3/8"

Frame Wt. (lbs.) 56 56 56 56H 184T 213TZ 215T

27.4 39.7 52.0 70.0 104.0 154.0 190.0

ITEM

PRICE

8031079 8031088 8031097 8031104 8000398 8031113 8000272

159.99 184.99 189.99 249.99 379.99 499.99 749.99

ITEM

PRICE

8031131 8031140 8031159 8031168

119.99 149.99 179.99 379.99

ITEM

PRICE

8031177 8031186

169.99 179.99

GENERAL PURPOSE MOTORS – Capacitor start, single phase.

RPM

Volts

1/2 3/4 1 5

1,755 1,755 1,740 1,760

115 / 208-230 115-208 / 230 115 / 208-230 208-230 / 460

Full Load Amps @ Voltage Breakdown 11.6 / 6.4-5.8 14.2 / 7.8-7.1 18.2 / 10.2-9.1 25.3-22.8 / 11.4

Shaft Size 5/8" 5/8" 5/8" 1-1/8"

Frame 56 56 56 184T

Wt. (lbs.) 26.6 30.6 37.3 92.0

COMPRESSOR MOTORS – Capacitor start, ball bearing.

RPM

Volts

1-1/2 2

3,490 3,495

115 / 208-230 115 / 208-230

Full Load Amps @ Voltage Breakdown 18.0 / 10.0-9.0 22 / 12.2-11.0

Shaft Frame Wt. Size (lbs.) 5/8" 56 33.0 5/8" 56H 37.3

C-FACE MOTORS

A B C D E F

Volts

2 3 5 2 3 5

115 / 230 115 / 230 230 115-208 / 230 208 / 230 208 / 230

E Full Load Amps @ 115V-208V / 230V 17 / 8.5 34 / 17 20 17.2 / 9.2 / 8.6 13.5 / 12.5 22

F RPM

Shaft

1,800 1,800 1,800 3,600 3,600 3,600

5/8" 5/8" 5/8" 5/8" 5/8" 3/4"

• Features: ball bearings, 60 Hz, reversible • Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor

Frame Size 56HC 184TC 184TC 56C 56HC 56C

Wt. (lbs.) 45.9 90.0 106.2 30.0 36.2 47.8

ITEM

PRICE

8001870 8001871 8001872 8001865 8001866 8001867

249.99 429.99 649.99 219.99 239.99 299.99

F A R M

ELECTRIC MOTORS All these farm duty motors feature: • 1,800 RPM • Totally enclosed & fan cooled • Manual overload • Reversible • Ball bearing, continuous duty • 1.15 service factor • Minimum 300% starting torque

FARM DUTY/INDUSTRIAL MOTORS A A A B C

HP 1/2 3/4 1 1-1/2 5

Volts 115 / 208-230 115 / 208-230 115 / 208-230 115 / 208-230 230

Full Load Amps 8.0 / 4.0-4.0 11.0 / 5.4-5.4 13.4 / 6.8-6.7 15.2 / 8.2-7.6 28

Shaft 5/8" 5/8" 5/8" 5/8" 1-1/8"

Frame Size 56 56 56 56H 213TZ

Wt. (lbs.) 25.0 28.7 30.9 41.0 118.5

ITEM 0750000 0750018 0750026 0750034 0750067

PRICE 174.99 194.99 199.99 269.99 549.99

• These open drip-proof motors are ideal for hydraulic pumps, gear boxes, workshops, water pumps, etc. • Capacitor start, ball bearings

GENERAL PURPOSE MOTORS

HP D 1/2 E 3/4 F 5

Volts

Full Load Amps @ 115V / 230V 115 8.2 115 / 208-230 11.0 / 5.5-5.6 208-230 23.0 / 21.0

RPM 1,725 1,725 1,725

Shaft Protection 5/8" 5/8" 1-1/8"

Reset Overload manual manual none

Wt. (lbs.) 18.2 25.0 82.0

ITEM

PRICE

0750152 0750154 0750074

129.99 189.99 449.99

ITEM

PRICE

8027306 0750101 0750366 0750349

189.99 219.99 199.99 299.99

COMPRESSOR MOTORS – Suitable for any application where 3,400 RPM is required

Volts

Full Load Amps @ RPM 115V / 230V

E E G H

1-1/2 115 / 208-230 14.8 / 8.0-7.4 3 230 14.0 2 115 / 208-230 19.2 / 10.5-9.6 5 208/230* 20.0 * Suitable for 208 volt operation

3,450 3,450 3,450 3,450

REVERSING SWITCHES

115V FURNACE FAN MOTORS

• Rated up to 1 HP, 110/220V, single phase • For starting, stopping and reversing electric motors on tools, hoists, conveyors, etc. I) SWITCH TYPE

• 15 amp • Steel housing with enamel 8000790 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . .

2299

J) LEVER TYPE

Shaft Reset Overload Wt. Protection (lbs.)

• Pure copper forged contacts • Heavy copper drum segments 0701441 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . .

5499

5/8" 5/8" 5/8" 7/8"

manual manual manual manual

26.5 33.1 30.5 55.0

• Sleeve bearings • Ball bearing • Resilient base mount • Reversible, continuous duty, thermally protected, open drip-proof • Mounts on resilient base or with 1" through bolts • Features gasket terminal cover, shaft slinger and zinc plated corrosive resistant hardware for use in poultry house/barn applications NOTE: These motors must be used in a fan application to ensure the motor is sufficiently cooled. HP 1/4 1/3 1/2

Amps 5.0 6.1 7.2

Wt. (lbs.) 13.0 14.7 18.8

ITEM 0753699 0752741 0755868

PRICE 79.99 89.99 119.99

LASER/CONTACT DIGITAL TACHOMETER

• Combination laser and contact tachometer in one unit • Laser light measures up to 2 meters away • Highly visible LCD display with memory recall function • Microprocessor based circuit, crystal time base, high precision with ± 0.05% accuracy • Strong ABS plastic housing • Requires 4 “AA” batteries - NOT INCLUDED 8002657 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F A R M

29999

6 DIGIT MACHINE COUNTER • Steel housing construction • 0 - 999,999 0700395 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

749

ELECTRICAL CORDS & OUTLETS FARM TOUGH EXTENSION CORDS

OUTDOOR EXTENSION CORDS ®

• Triple outlet • 16/3 SJTW cord • For all year/all weather use

A B • Will not absorb oil, become brittle, or swell • Flexible in all temperatures • Resists common farm and industrial chemicals Length

Plug Wire Wt. (lbs.) ITEM PRICE 2.8 0700235 29.99 6.6 0700279 44.99 12.7 0700280 84.99

A 8 m (25 ft.) Triple 14/3 B 15 m (50 ft.) Single 12/3 B 30 m (100 ft.) Single 12/3

POWER BLOCKS

ITEM 0708479 0708487 0708495

PRICE 6.99 16.99 21.99

WINTERFLEX EXTENSION CORD

• Flexible to -50°C (-85°F) • Special polymer ends allow easy plug insertion no matter how cold • Triple outlet cord end • Oil resistant and flame retardant 16/3 SJOW cord • Ideal for block heaters or outdoor lighting

C D

C) 6 OUTLET

1699

D) 8 OUTLET

3 transformer spaced outlets. 8057318 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. (lbs.) 0.9 2.4 3.7

• Metal housing • Built in cord management • 6 ft. cord • Lighted on/off switch 2 transformer spaced outlets. 8057283 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Length 3 m (10 ft.) 10 m (33 ft.) 15 m (50 ft.)

1999

3 METERS 0700364 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . 5 METERS 0700365 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . .

1399 1699 3 METERS with LIGHT UP END 99 8000948 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . 19 POWER BAR

TRIPLE OUTLET TAP • 120 VAC, 15 amp • Orange single plug with 3 receptacles 0700358 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

• 6 outlet metal bar • 12V transformer for use with 12V accessories • Lighted on/off switch 99 8001883 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

POWER PRO™ CONTRACTOR GRADE POWER CORDS

A R M

40 FT EXTENSION CORD

• Retractable reel • 14 gauge, triple end cord • Swivel bracket to mount on wall or ceiling • Durable plastic housing • Reset switch on cord 99 8003221 – Wt. 13.7 lbs. . . . . . . . . . . . . . . . .

• 3-wire cord features exclusive high gloss SJTW super flexible wire • Power Lite™ indicator plug glows when cord has power • Extra heavy, clear moulded plug • More flexible at any temperature than standard vinyl compounds • Full lifetime guarantee Length

ITEM 0708438 0708446 0708461 0708453 0708404 0708412 0708420

PRICE 21.99 36.99 49.99 69.99 29.99 54.99 89.99

• Heavy duty 12/3, 65 ft. cord • SJTOW grade is oil and chemical resistant • 3 outlet lighted end • Impact resistant housing on reel 8028760 – Wt. 12.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8499

A 8 m (25 ft.) A 15 m (50 ft.) A 15 m (50 ft.) A 30 m (100 ft.) B 8 m (25 ft.) B 15 m (50 ft.) B 30 m (100 ft.)

Plug Single Single Single Single Triple Triple Triple

Wire Wt. (lbs.) 14/3 2.4 14/3 5.0 12/3 6.7 14/3 9.2 14/3 2.7 12/3 7.3 12/3 13.3

BULK ELECTRICAL CORD

MOULDED THERMOPLASTIC PLUGS & CONNECTORS D

• 120 VAC, 15 amp • Terminals in individual chambers to insulate conductors • OEM styling D) BLACK EXTENSION CORD PLUG 0700354 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

349 E) ORANGE EXTENSION CORD PLUG 49 0700355 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 3 F) BLACK EXTENSION CORD SOCKET 99 0700356 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 5 G) ORANGE EXTENSION CORD SOCKET 99 0700357 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 5

DIGITAL BLOCK HEATER/TIMER ®

Type SJTW: • PVC coated • Outdoor, weatherproof • For outdoor equipment, portable power tools, lawn mowers, trimmers, and block heaters • Heavy duty rubber insulation Type S: • For heavy tools subject to hard usage in wet/damp or dry locations • High voltage and high amperage conditions Size Type Volt Amp Wt. ITEM PRICE Rating Rating (lbs./ft.) 16/3 SJTW 300 10 0.1 0704957 0.39/ft. 14/3 SJTW 300 15 0.1 0704940 0.49/ft. 14/3 S 600 15 0.2 0700203 0.89/ft. 12/3 S 600 20 0.2 0703405 1.19/ft. 10/3 SOOW 600 25 0.3 0703835 1.49/ft.

• Simple push button programming of on/off times • Digital display shows current time or on/off settings • Durable weatherproof construction 99 8028742 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TECH TIPS

This table below shows the recommended wire gauge and length for various horsepower and amp ratings at 125 volts. Appliance Amps Rating 7 10 13 15 20

REQUIRED CORD GAUGE

Up to 50 ft. 18 18 16 14 12

Over 50 ft. 18 16 14 12 10

RECEPTACLES, CONNECTORS and PLUGS

ELECTRICAL PLUGS Rated at 15 amps. MALE PLUG Wt. 0.1 lbs.

F G

0704353 . . . . . . . . . .

FEMALE SOCKET Wt. 0.1 lbs.

0704361 . . . . . . . . . .

99 W

X Y

RUBBER CORD CONNECTORS Rated at 15 amps. MALE PLUG Wt. 0.1 lbs.

0700146 . . . . . . . . . . .

FEMALE SOCKET Wt. 0.2 lbs.

0700138 . . . . . . . . . .

449

125V, 15 AMP PLUGS

Volts Amps Wt. (lbs.) A 250 15 0.1 B 250 15 0.2 C 250 15 0.1 D 125 30 0.2 E 250 30 0.2 *Locking connector

ITEM 0706002 0706044 0706036 0704502 0704528

PRICE 6.49 8.99 6.99 18.99 20.99

A R M

PLUGMATE CORD CONNECTOR

Snaps open for easy wiring. MALE PLUG Wt. 0.1 lbs.

8019930 . . . . . . . . . . .

599

FEMALE SOCKET Wt. 0.1 lbs.

8020045 . . . . . . . . . .

799

125-250V, 30 AMP PLUGS

• Prevents cord “hang up” • Accepts all sizes of cord up to and including 5/8" dia. and keeps all combinations of plug sizes together • Resists oils, solvents, and acids • Remains flexible to -40°C/°F 0700359 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

SWITCHES • 30A 3 pole, 4 wire grounding - 115/250 volt • Neoprene gasket seals cord hole from dust and debris • Back wire terminal clamps for secure wiring • Locking plug end for secure connection • Can be used for 10,000 watt generator cord MALE PLUG Wt. 0.4 lbs.

8005780 . . . . . . . .

3999

• Dustproof • SPST • 16A @ 125 VAC, 10A @ 250 VAC

F) TOGGLE SWITCH 0700284 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

FEMALE SOCKET Wt. 0.5 lbs.

8005774 . . . . . . .

8999

MAGIC WRAP TAPE

G) ROCKER SWITCH 0700285 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

369 159

ELECTRICAL TAPE • CSA approved • Vinyl tape 3/4" wide x 66 ft. long

• Bonds to itself forming a solid rubber wrap that is air and water tight to 100 PSI • 1" x 8 ft. roll stretches to 3 times initial length • Ideal for plumbing, automotive, electrical, etc. 0700353 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

549

89¢

0701003 – Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0700257 – White 0700258 – Yellow 0700259 – Green 0700261 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

139

ELECTRICAL SWITCHES • Rated 6A @ 125V, 3A @ 300V • Fits into 7/8" mounting hole Style H Momentary Push H Momentary Push H Momentary Push I Emergency Stop I Emergency Stop J 2-Position Select J 3-Position Select J 3-Position Momentary Select K Direct Type

H Head Type Standard Standard Standard Push Lock Push Lock Knob Knob Knob Green Illuminated

I J Type of Contact N.O. N.C. N.O. or N.C. N.C. N.O. or N.C. N.O. N.O. N.O. or N.C. N.O. or N.C.

Wt. (lbs.) 0.1 0.8 0.1 0.1 0.1 0.1 0.1 0.1 0.1

K ITEM PRICE 0700318 3.69 0700319 3.69 0700320 5.19 0700321 7.49 0700322 8.49 0700323 5.99 0700324 6.99 0700326 7.49 0700327 7.49

F A R M

WEATHERPROOF JUNCTION BOX

TERMINAL BLOCKS

Includes box, receptacle, and covers. 0705970 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

749

SWITCH MOUNTING BOXES • 2 piece plastic box • 7/8" mounting hole Holes 1 2

Size 3" x 3" x 2-1/4" 3" x 4-1/2" x 2-1/2"

ITEM 0700332 0700333

PRICE 5.49 6.49

• 10 sections • Sections can be separated to form blocks with different number of sections and different amperage Amps Pitch ITEM PRICE 10 9.1 mm 0700337 3.49 20 11.6 mm 0700338 4.99 30 13.2 mm 0700339 5.49

YARD, SPOT & SHOP LIGHTS SECURITY LIGHTS • Energy efficient high pressure sodium lights • Higher initial cost is offset by low power consumption and much longer life • 70 watt high pressure sodium gives as much light as a 175 watt mercury vapor light; a 150 watt HPS equals a 250 watt mercury vapor A) 70 WATT/115V HIGH PRESSURE SODIUM LIGHT

• Photo-electric eye included • 9" housing dia. 0701367 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

6999

REPLACEMENT 70W BULB

115 volt with medium base. 0700849 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 24.99

REPLACEMENT PHOTO-ELECTRIC CONTROL For 0701367 and 0701375. 0702738 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 15.99 C) 175 WATT/115V MERCURY VAPOR LIGHT

REPLACEMENT 150W BULB

• Precision die-cast aluminum housing • Mounting arm extends 5" from housing • Replaceable twist lock automatic dusk to dawn operation photo control included • 16-1/2" high • Housing dia.: 13-1/2" • 175 watt bulb included 0700187 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

115 volt with medium base. 0700856 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 24.99

REPLACEMENT 175 WATT/115 VOLT BULB 0700633 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

PILOT LAMPS

1,000 WATT FLOOD LIGHT

B) 150 WATT/115V HIGH PRESSURE SODIUM LIGHT

• Photo-electric eye included • 1-5/8" x 18" mounting arm • 12" housing dia. 0701375 – Wt. 11.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

9999

110 volt.

4999 14.99

AMBER

369 CLEAR 69 0700405 – Wt. 0.8 lbs. . . . . . . . . . . . 3 0700404 – Wt. 0.1 lbs. . . . . . . . . . . .

QUARTZ HALOGEN FLOOD LIGHT

• 500 watts/115 VAC • Ideal flood lights to use around the home and yard for security or night activity • Operates on standard household current 99 0703512 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

500W/115V REPLACEMENT BULB 0700288 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

3.99

• Two 500 watt quartz lamps • Telescopic stand extended height: 6ft 9" • Toggle switch for each side • Fold-up pedestal legs for easy storage • Fully adjustable twin lamps 8002211 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

4499

1,000,000 CANDLE POWER SPOTLIGHT

• 5" lens • 9 ft. cord and plug • Plugs into cigarette lighter type socket 8022971 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1499

• 5" lens • Up to 30 minutes of continuous use • Built-in rechargeable battery pack • Recharge with 110 volt AC adapter or cigarette lighter adapter • Lockable trigger 99 8003394 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A R M

19 399

REPLACEMENT 55 WATT BULB 0700370 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

RETRACTABLE FLUORESCENT LIGHT

700,000 CANDLE POWER SPOTLIGHT

• 12 m (40 ft), 16/3 SJT cord • Metal case • 13 watt fluorescent light • Grounded outlet in handle 8003824 – Wt. 9.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

7999

FLUORESCENT TROUBLE LIGHT

• 5-1/2" lens • Detachable 6 volt, 4 amp rechargeable battery pack • 110 volt AC adapter and 12 volt cigarette lighter adapter • Up to 35 minutes of continuous use • Lockable trigger and top mounted loop for hanging 8022953 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

RETRACTABLE TROUBLE LIGHTS • 8 m (26-1/2 ft.) SJTW cord stays flexible to -50°C (-58°F) • 120 volt, 13 watts provides as much light as a 75 watt bulb • Wall mount bracket • Grounded outlet in handle 8003828 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

12V TROUBLE LIGHT

• Galvanized metal lamp shield • Two hanging hooks • Grounded outlet in handle A) 20 ft.

3.7 m (12 ft.) cord with alligator clamps. 8010966 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• 18/3 type SVT wire • Plastic case 8003827 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TROUBLE LIGHTS

3999

B) 30 ft.

• 16/3 type SJTW wire • Metal case 8003820 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

6999

TROUBLE LIGHT REPLACEMENT BULBS • 16/3 type SJT wire • Metal cage and reflector • Grounded plug in handle Length 25 ft. 50 ft.

Wt. (lbs.) 2.5 4.5

12 VOLT ROUGH SERVICE

0700019 – 25 watts 0700020 – 50 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . ITEM 8003829 8003832

PRICE 17.99 29.99

129

110 VOLT ROUGH SERVICE

0704866 – 50 watts 0700018 – 100 watts . . . . . . . . . . . . . . . . . . . . . . . . . .

119

F A R M

3-POINT HITCH REPLACEMENT PARTS Listed below are the most common replacement parts for Category One and Two, 3-Point Hitches which can be used in building or adapting equipment for use on 3-Point Hitches.

RATCHET JACK TOP LINK

ST AB ILI ZE RA RM

TOP LINKS Heavy duty forged ends with full 1-1/8" threads ensure maximum strength.

TOP LINK

A 2" 2-3/8"

B Dia. 3/4" 1"

C 1-1/8" 1-1/8"

D 1/2" 5/8"

E 1-3/4" 2"

F 2-1/4" 2-5/8"

Wt. (lbs.) ITEM 0.9 3806569 1.5 3806577

PRICE 13.49 15.99

A 2-3/4" 3-1/8"

B Dia. 7/8" 1-1/8"

C 2-3/8" 2-3/4"

D 5/8" 3/4"

E 1-3/8" 1-3/4"

F 2-5/8" 3-1/8"

Wt. (lbs.) ITEM 1.9 3806544 3.3 3806551

PRICE 16.99 24.49

LIFT ARM

Cat. 1 2

P.T.O. LOCK PINS

LINCH PINS Package of 4. Style Category Wt. (lbs.) 3/16" Standard 1&2 0.1 1/4" Standard 1&2 0.2 5/16" Standard 1&2 0.3 7/16" Standard 1&2 0.4 7/16" Long 1, 2 & 3 0.5 7/16" Heavy Duty 1, 2 & 3 0.5

ITEM 3800236 3800233 3800234 3800235 3800239 3800237

PRICE 1.39/pkg. 1.59/pkg. 1.99/pkg. 1.99/pkg. 1.99/pkg. 3.49/pkg.

STABILIZER PIN • 5/8" 18-thread • 7/8" dia. shank x 2-5/8" long • Replaces Ford 23044, MF 181777M1 3806767 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A A B B

Wt. 0.1 lbs.

Pin dia. 5/16" 1/4" 1/4" 5/16"

Length 3" 3" 3" 3"

ITEM PRICE 3806759 0.99 8002034 0.99 8002035 1.29 3890478 1.29

1" HAIR PIN

249

Pkg. of 4. 3800515 – Wt. 0.2 lbs. . . . . . . . . . . . .

299/pkg.

DOUBLE RING PRESTO PINS

PRESTO PINS Dia. x Length Fits Pin Dia. Pkg. Qty. 3/32" x 1-3/4" 3/8"-5/8" 9 1/8"x 2-1/16" 1/2"-7/8" 6 5/32" x 3" 5/8"-1" 5 3/16" x 4-3/16" 3/4"-1-1/4" 2 1/4" x 4-1/4" 7/8"-1-1/2" 2 5/16" x 3-7/8" 3/4"-1-1/4" 1

Wt. (lbs.) 0.1 0.1 0.2 0.1 0.3 0.3

ITEM 3800241 3800242 3800243 3800245 3800246 3800247

PRICE (pkg.) 2.49 1.79 1.89 1.19 1.49 1.19

Dia. 3/32" 5/32" 3/16" 1/4"

FOR YOUR INFORMATION...

Pkg. Wt. Qty. (lbs.) 5 0.1 5 0.3 5 0.6 5 1.0

ITEM

PRICE

3800460 3800461 3800462 3800464

1.69/pkg. 2.29/pkg. 3.59/pkg. 4.49/pkg.

We update over 160,000 names on the mailing list every year. To ensure you recieve our flyers and catalogues without interruption, update your name to our list every 9 months.

SPLINED ADAPTER SLEEVE

UNIVERSAL YOKE PIN KIT

A R M

Fits most American P.T.O. yokes. 3806742 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

• 1-1/8" x 6-spline interior • 1-3/8" x 6-spline exterior 3852761 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . .

UNIVERSAL JOINTS WHEEL SPINNER

• Standard type U-joints • Designed for use on power take-offs, hydraulic hoists, farm implements and other similar applications • Forged steel yokes and crosses, accurately machined and heat treated on all wearing surfaces • Max. recommended torque continuous duty: 1,000 RPM, 400 in.-lbs. (approx. 6.3 HP) • Max. recommended angle of operation: 15° continuous, 45° slow speed Size & Slip Size 3/4"R x 3/4"R 1"R x 1"R 3/4"R x 3/4" Sq. 7/8"R x 3/4" Sq. 1"R x 3/4" Sq. 1"R x 7/8" Sq.

Wt. (lbs.) 2.4 2.2 2.4 2.3 2.3 2.2

ITEM 3840139 3840238 3840246 3840287 3840303 3840311

• Clamps onto steering wheel of off-road vehicles to assist in steering • To be used on tractors, forklifts or other off-road vehicles • NOT FOR USE on highway vehicles 3800123 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . .

999

TRACTOR P.T.O. ADAPTERS

PRICE 34.99 34.99 34.99 34.99 34.99 34.99

• 1 end fits 1-3/8" x 6-spline P.T.O. • Other end has round bore with keyway • O’all length: 4-1/2" Round Keyway Wt. ITEM PRICE Bore Size (lbs.) 3/4" 3/16" 1.9 3852712 49.99 1" 1/4" 1.8 3852746 49.99

SNAP HITCH SPLINED ADAPTER • 7" long • 1-3/8" x 21 female spline, 1-3/8" x 6 male 3852753 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1199

4099

PIN & RING KITS SCREW AND PIN KITS

D E A) 71 PC UNIVERSAL CLEVIS PIN KIT

• 5 pcs. 5/16" x 2"; 18 pcs. 3/8" x 2"; 5 pcs. 7/16" x 2-1/2" • 3 pcs. 1/2" x 2" & 40 various hairpins 3800534 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) 170 PC TAPER PIN ASSORTMENT

2699

• 1/4", 5/16", and 3/8" • Lengths from 1" to 3" 8002544 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• 6 sizes ranging from 1/8" to 3/8" • 1/4", 5/16" and 3/8" in NC and NF thread 3800532 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2199

E) 170 PC U-CLIP AND SCREW KIT

B) 150 PC HAIR PIN ASSORTMENT

Includes: 6 sizes from 3/32" to 5/32", lengths from 1-3/16 to 2-5/16". 8002536 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

D) 150 PC HEX HEAD SET SCREW KIT

20 PC CLEVIS PIN ASSORTMENT

Includes 48 sizes from #0 x 3/4" to #6 x 3". 8002545 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

4 screw sizes: #6, #8, #10, and 1/4" with 5 sizes of clips. 3800533 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1399

SNAP RING and E-CLIP KITS

COTTER PIN KITS

A R M

144 COTTER PINS WITH SPREADER/REMOVER TOOL

• 40 pcs. each of 1/16" x 3/4", 3/32" x 3/4", 3/32" x 1" • 12 pcs. 1/8" x 1"; 12 pcs. 1/8" x 1-1/4" 3800893 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 144 COTTER PINS – Contains: 1/16" x 1", 3/32" x 3/4", 3/32" x 1", 1/8" x 1-1/4". 3809662 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

349

285 PC INTERNAL AND EXTERNAL SNAP RING KIT

90 internal rings in 6 sizes ranging from 7/16" to 13/16" and 195 external rings in 12 sizes ranging from 1/4" to 1-1/4". 99 3801057 – Wt. 0.6 lbs. . . . . . . . . . . . . . . .

144 LARGE COTTER PINS

• 50 pcs. 1/8" x 2"; 30 pcs. 5/32" x 2-1/2" • 20 pcs. 3/16" x 3"; 20 pcs. 1/4" x 2" • 16 pcs. 1/4" x 3"; 8 pcs. 5/16" x 2-1/2" 99 3800535 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 555 COTTER PINS – 150 pcs. 1/16" x 1"; 150 pcs. 3/32" x 1"; 100 pcs. 3/32" x 1-1/2"; 75 pcs. 1/8" x 1-1/4"; 50 pcs. 1/8" x 2"; 30 pcs. 5/32" x 2-1/2". 99 3801065 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

ROLL PIN KITS

100 PC INTERNAL SNAP RING KIT

6 sizes ranging from 7/16" to 13/16". 3800502 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . .

999

300 PC EXTERNAL SNAP RING KITS

18 sizes ranging from 1/8" to 1-1/4". 3801024 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . 6 sizes internal from 7/16" to 13/16", 12 sizes external from 1/4" to 1-1/4". 8002538 – Wt. 0.7 lbs. . . . . . . . . . . . . . . .

1999 1999

150 PC E-CLIP KIT

9 sizes ranging from 1/16" to 7/8". 3800507 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . .

999

300 PC E-CLIP KIT

9 sizes ranging from 1/16" to 3/4". 3801016 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . 120 PC ROLL PIN KIT

30 sizes ranging from 1/16" dia. x 3/16" long to 3/8" dia. x 2" long. 3802238 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

460 PC SHOP ASSORTMENT

Includes 18 sizes of half round pin, roll pin, snap ring and e-clip. 99 8002543 – Wt. 1.5 lbs. . . . . . . . . . . . . . . .

315 PC ROLL PIN KIT

WASHER SETS

30 sizes ranging from 1/16" dia. x 3/16" long to 3/8" dia. x 2" long. 3801040 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

1000 PC COTTER PIN KIT

Includes 6 different sizes. 8002535 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

O-RING KITS 720 PC LOCK WASHER SET

• Zinc plated • 3 styles: #6, #8, #10 • I.D. 1/4", 5/16", 3/8" 8002540 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 50 PC O-RING KIT

Contains: 12 sizes ranging from 1/4" I.D. x 3/8" O.D. to 3/4" I.D. x 1" O.D. 3801099 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

54 PC AUTOMOTIVE O-RING KIT

Contains: sizes ranging from 3/8" I.D. x 9/16" O.D. to 3-1/8" I.D. x 3-1/2" O.D. 99 3801032 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

225 PC O-RING KIT

Contains: sizes ranging from 3/32" I.D. x 15/64" O.D. to 3/4" I.D. x 1" O.D. 99 3801073 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

407 PC O-RING KIT

• I.D. sizes 1/8" to 2" • O.D. sizes 1/4" to 2-1/4" 8025353 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

250 PC FLAT and LOCK WASHER SET

1999

Includes 98 flat washers and 152 lock washers sized from 3/16" to 3/8". 99 8002541 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

200 PC ANTI-VIBRATION WASHERS

Includes 9 sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 15/32", 5/8", and 3/4". 99 8002542 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

POWERFIST

We proudly supply you with Powerfist products, which have a proven reliability and great value, Only available at Princess Auto!

F A R M

HEAVY DUTY EYE BOLTS

SPRINGS COMPRESSION SPRINGS

Drop forged and heat treated. Thread Size Safe Working Ultimate Wt. ITEM PRICE Load Load (lbs.) 1/4" - 20 400 lbs. 3,000 lbs. 0.1 3880200 3.99 5/16" - 18 1,000 lbs. 4,000 lbs. 0.1 3880218 4.49 3/8" - 16 1,400 lbs. 6,000 lbs. 0.2 3880226 4.99 1/2" - 13 2,000 lbs. 7,800 lbs. 0.4 3880234 5.49 5/8" - 11 2,600 lbs. 10,000 lbs. 0.7 3880242 8.49 3/4" - 10 6,000 lbs. 24,000 lbs. 1.0 3880259 9.99 151 PC EYE BOLT SET

Includes: 1-13/16", 1-1/8", and 1-15/16" eyebolts, 1-5/8", 2-1/2", and 3-3/8" screw hooks. 8002547 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

THREADED ROD

Grade 5 metal. Size 1/4" 5/16" 3/8" 3/8" 7/16" 1/2" 1/2" 5/8" 5/8" 3/4" 1"

Length 36" 36" 36" 120" 36" 36" 120" 36" 120" 36" 36"

Wt. (lbs.) 0.4 0.6 0.9 2.9 1.0 1.6 5.3 2.3 8.3 3.7 6.5

ITEM 8001852 8001853 8001853 8001856 8001857 8001858 8001859 8001860 8001861 8001862 8001863

PRICE 0.99 1.19 1.49 3.99 1.99 2.49 6.49 3.99 9.99 5.49 8.99

COUPLING NUTS

Size Qty. ITEM PRICE 6 x 45 mm 3 3805959 1.39 10 x 70 mm 2 3805991 1.49 14 x 76 mm 1 3806072 1.49 16 x 70 mm 1 3806080 1.49 18 x 90 mm 1 3806106 1.49 22 x 100 mm 1 3806114 1.49 EXTENSION SPRINGS

Individual sizes. Size 10 x 170 mm 11 x 50 mm 11 x 64 mm 11 x 70 mm 11 x 216 mm 12 x 260 mm 13 x 38 mm 13 x 216 mm 14 x 73 mm 14 x 216 mm 14 x 420 mm 16 x 83 mm 16 x 165 mm 16 x 216 mm 17 x 140 mm 19 x 67 mm 19 x 79 mm 19 x 100 mm 19 x 165 mm 20 x 100 mm 22 x 216 mm 23 x 83 mm 25 x 178 mm 25 x 216 mm 25 x 305 mm 27 x 140 mm 27 x 178 mm

ITEM 3806205 3806247 3806239 3806262 3806254 3806288 3806296 3806304 3806312 3806320 3806338 3806346 3806353 3806361 3806379 3806411 3806429 3806437 3806445 3806452 3806460 3806478 3806486 3806494 3806502 3806510 3806528

PRICE 3.59 1.29 1.29 1.49 3.59 3.59 1.49 3.59 1.29 3.89 4.19 1.89 2.19 3.59 3.59 1.29 1.89 1.89 3.59 2.19 3.99 3.99 3.59 3.99 4.59 2.59 3.59

SPRING KIT Size 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

Wt. (lbs.) 0.1 0.1 0.1 0.2 0.3 0.4 0.4

ITEM 3860434 3860442 3860459 3860483 3860491 3860509 3860657

150 PC NYLON INSERT LOCK NUT ASSORTMENT

• 200 piece assortment • Small compression and extension springs 99 3801008 – Wt. 1.0 lbs. . . . . . . . . .

60 PC MACHINERY KEY SET

Includes 6 sizes: #10 x 24, 1/4" x 20, 1/4" x 28, 5/16" x 18, 3/8" x 16 and 1/2" x 13. 8002548 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

PRICE 0.39 0.69 0.79 1.19 1.99 2.59 3.99

Includes 13 sizes from 1/8" x 1/8" x 3/4" to 1/2" x 1/2" x 1-1/2". 8002549 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

201 PC CONICAL ANCHOR KIT

225 PC RETAINING RING SET

Includes: 100 screws, 100 anchors, and one 1/4" x 4" carbide drill bit. 8002534 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

Includes 70 internal rings sized from 13/16" to 3/4" and 155 external rings sized from 3/16" to 1-1/4". 8002539 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

PULLEYS & HOOKS

A R M

PULLEY BLOCKS

Size 4" 5" 6"

Safe Working Load 1.5 tons 1.7 tons 2.2 tons

• Ball bearing construction with pressure grease fittings • All connections of quality drop forged steel • Shell construction prevents rope from lodging between sheave and shell • Wire rope will not lose position in block even when slack Wire Rope Capacity Wt. (lbs.) ITEM PRICE 1/4" - 5/16" 5.2 3800100 34.99 5/16" - 7/16" 9.0 3800101 39.99 3/8" - 1/2" 15.8 3800102 54.99

PULLEY BLOCKS CAUTION DO NOT mount “flange” units with wood screws.

FIXED GABLE

Sheave Max. Cap. Dia. Cable (lbs.) Size 1-1/2" 3/16" 420 2" 3/16" 480 2-1/2" 1/4" 550 3" 1/4" 650 3-1/2" 5/16" 1,250

Wt. (lbs.)

ITEM

0.5 0.7 1.0 1.2 1.8

3801479 3801487 3801495 3801503 3801511

PRICE Wt. (lbs.) 8.59 12.99 15.99 17.99 26.99

1.7 0.6 0.9

ITEM

PRICE

3801529 3801537 3801545

7.79 9.59 12.99

SWIVEL EYE

Sheave Max. Cap. Dia. Cable Size (lbs.) 1-1/2" 3/16" 420 2" 3/16" 480 2-1/2" 1/4" 550 3" 1/4" 650 3-1/2" 5/16" 1,250 * 5/16" bore A

Wt. (lbs.) 0.5 0.8 1.1 1.2 1.9

Use #10 machine bolts and nuts.

FIXED FLANGE

• All steel, bright zinc plated for maximum corrosion resistance • Oil impregnated bronze bushings • “Hairpin” clip allows the sheave to be removed easily for rigging

SHEAVES with BUSHINGS

ITEM

PRICE

3801420 3801438 3801446 3801453 3801461

13.49 14.99 18.99 21.99 34.99

Wt. (lbs.) 0.2 0.4 0.6 0.6 0.8

ITEM

PRICE

3801578* 3801586* 3801594* 3801602* 3801610*

4.59 6.49 9.29 9.99 10.49

PULLEY BLOCKS Can be used to double the pulling capacity of a winch.

Vert. Horiz. Pulley Max. Cable O’all Wt. ITEM PRICE Cap. Cap. Dia. Size Dim. (lbs.) A 4,000 lbs. 8,000 lbs. 2-1/4" 7/32" 7" x 3" x 1-1/4" 1.7 3800047 24.99 B 8,000 lbs. 16,000 lbs. 4" 5/16" 9" x 4" x 1-3/4" 4.5 3800046 31.99

F A R M

HEAVY DUTY SNATCH BLOCKS

Cap. (tons) 1 3

O’all. Outside length Dia. 12-1/3" 4-1/2" 19-1/4" 6-3/4"

REPLACEMENT SHEAVES

Pulley Size Outside Inside Wt. ITEM PRICE Width Width (lbs.) 1" 5/8" 6.8 3800109 44.99 1-5/8" 1-1/8" 23.4 3801958 79.99

PULLEYS

A A A A A A A

Type Single Rigid* Single Rigid* Single Rigid* Single Rigid Single Rigid Single Rigid

B Size Wt. (lbs.) 1/2" 0.1 3/4" 0.2 1" 0.2 1-1/4" 0.2 1-1/2" 0.2 2" 0.5

C ITEM PRICE 8003206 1.99 8003215 2.19 8003224 3.39 8003233 1.99 8003242 2.09 8003251 3.59

B B B B B C C C C C C

Type Double Rigid* Double Rigid* Double Rigid Double Rigid Double Rigid Single Swivel* Single Swivel* Single Swivel* Single Swivel Single Swivel Single Swivel

Cap. (tons) 1 Ton 2 Ton 3 Ton

Size Wt. ITEM PRICE (lbs.) 4" 2.8 3850781 14.99 5" 5.1 3850799 19.99 6" 7.6 3850807 24.99

Size Wt. (lbs.) 3/4" 0.2 1" 0.4 1-1/4" 0.4 1-1/2" 0.4 2" 0.7 1/2" 0.1 3/4" 0.1 1" 0.2 1-1/4" 0.3 1-1/2" 0.3 2" 0.5

ITEM 8003279 8003288 8003297 8003313 8003322 8003331 8003340 8003359 8003368 8003377 8003386

PRICE 3.69 5.39 3.19 4.19 5.59 2.19 2.39 3.69 2.19 2.29 3.99

*Package of 2.

GRAB and SLIP HOOKS

D) SLIP HOOKS

• Alloy steel; yellow zinc coated • Heat treated Size Safe Working Load Wt. (lbs.) ITEM 1/4" 2,750 lbs. 0.6 3800344 5/16" 4,300 lbs. 0.8 3800345 3/8" 5,250 lbs. 1.3 3800346

F) GRADE 43 HIGH TEST

PRICE 3.99 4.99 6.99

D) GRADE 30 SLIP HOOKS

Galvanized, forged carbon steel. Size Safe Working Load Wt. (lbs.) ITEM 1/4" 1,950 lbs. 0.5 3800059 5/16" 2,875 lbs. 0.8 3800067 3/8" 4,000 lbs. 1.3 3800075

PRICE 2.29 2.69 4.99 PRICE 3.99 4.99 6.99 14.99

• Alloy steel, yellow zinc coated • Heat treated Size Safe Working Load Wt. (lbs.) ITEM 1/4" 3,600 lbs. 0.4 3800343 5/16" 5,400 lbs. 0.8 3805371 3/8" 7,500 lbs. 1.1 3805389

PRICE 3.99 4.99 5.49

G) GRAB HOOKS with LATCH

Size Safe Working Load Wt. (lbs.) ITEM 1/4" 3,600 lbs. 0.6 3800631 5/16" 5,400 lbs. 1.0 3800632 3/8" 7,500 lbs. 1.4 3800633

GRADE 70 TRACTOR TOW HOOK • Working load: 1,200 lbs., breaking load: 4,500 lbs. • 40 chrome alloy steel 8017852 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PRICE 2.29 2.89 3.89

F) GRADE 70

E) CLEVIS SLIP HOOKS with LATCH

Size Safe Working Load Wt. (lbs.) ITEM 1/4" 1,950 lbs. 0.5 3800337 5/16" 2,875 lbs. 0.9 3800338 3/8" 4,000 lbs. 1.4 3800339 1/2" 6,500 lbs. 3.1 3800340

Galvanized, forged carbon steel. Size Safe Working Load Wt. (lbs.) ITEM 1/4" 2,600 lbs. 0.8 3800000 5/16" 3,900 lbs. 0.7 3800018 3/8" 5,400 lbs. 1.0 3800026

1699

PRICE 4.99 6.29 6.79

QUICK LINKS

EYE HOOKS

• Time saving connector for chain connections, sling chains, tire chains • Tested for safe working loads • Galvanized for rust protection • Versatile, reliable and easy to install

• Forged carbon steel, quenched and tempered • Complete with spring latch • Ultimate load: 5 times working load

Size 3/16" 1/4" 5/16" 3/8" 7/16"

Safe Working Load 660 lbs. 880 lbs. 1,760 lbs. 2,200 lbs. 2,460 lbs.

Wt. (lbs.) 0.1 0.1 0.2 0.3 0.3

ITEM

PRICE

3800289 3800290 3800291 3800292 3800293

0.99 1.09 1.49 1.99 2.49

Safe Working Load 1,500 lbs. 2,000 lbs. 3,000 lbs. 4,000 lbs. 6,000 lbs.

Eye Dia. 3/4" 29/32" 1-1/8" 1-3/16" 1-9/16"

F O’all Length 4-1/2" 5" 5-1/2" 6-3/8" 7-7/8"

Wt. ITEM PRICE (lbs.) 0.5 3800283 4.49 0.8 3800284 5.49 1.4 3800285 8.49 2.1 3800286 9.99 3.8 3800287 16.99

A R M

SWIVEL HOOKS • Forged carbon steel, quenched and tempered • Ultimate load is 5 times working load Safe Working Load Eye Dia. O’all Length Wt. (lbs.) 1,500 lbs. 15/16" x 1-1/4" 4-15/32" 0.8 2,000 lbs. 1-5/16" x 1-1/2" 5-9/32" 1.4 3,000 lbs. 1-5/8" x 1-3/4" 6-1/64" 2.4 4,000 lbs. 1-9/16" x 1-3/4" 6-3/8" 2.8 6,000 lbs. 1-3/4" x 2" 7-13/32" 5.4

ITEM 3800330 3800332 3800333 3800335 3800336

PRICE 6.99 9.99 13.99 15.49 26.99

HIGH TENSILE SCREW PIN ANCHOR SHACKLES A

B • Body C 1045 forged carbon steel • Alloy steel pins • Load rated • Breaking load 6 times safe working load • Heavy duty galvanized body

Shackle Size 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1"

Pin Dia. 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8"

Depth (A)

7/8" 1-1/8" 1-1/4" 1-1/2" 1-3/4" 1-7/8" 2-1/4" 2-3/4" 3-1/2" 3-3/4"

Width Working Load (B) (metric tons) 5/16" 1/3 1/2" 1/2 1/2" 3/4 5/8" 1 3/4" 1-1/2 3/4" 2 1" 3-1/4 1-3/16" 4-3/4 1-1/2" 6-1/3 1-3/4" 8-1/2

Wt. (lbs.) 0.1 0.1 0.2 0.3 0.5 0.7 1.5 2.4 3.7 5.0

ITEM

PRICE

3800347 0.99 3800386 1.19 3800387 1.39 3800388 1.79 3800389 2.19 3800390 2.99 3800391 4.99 3800392 7.49 3800393 9.99 3800394 14.99

COIL CHAIN GRADE 30 SELF-COLOURED CHAIN

Size

Safe Working Limit 3/16" 800 lbs. 1/4" 1,300 lbs. 5/16" 1,900 lbs. 3/8" 2,650 lbs.

Wt. (lbs.) 0.4 0.7 1.1 1.4

GRADE 30 HOT DIPPED GALVANIZED

ITEM

PRICE

3805876 3805884 3805892 3805900

0.79/ft. 0.89/ft. 1.29/ft. 1.69/ft.

High quality rust resistant coating Size Safe Working Wt. ITEM Limit (lbs.) 3/16" 800 lbs. 0.4 3800498 1/4" 1,300 lbs. 0.7 3800499 5/16" 1,900 lbs. 1.1 3800500 3/8" 2,650 lbs. 7.3 3800501

PRICE 0.99/ft. 1.39/ft. 1.79/ft. 2.39/ft.

GRADE 30 ELECTRIC GALVANIZED CHAIN

Bright finish with increased rust resistance. Size Safe Working Wt. ITEM Limit (lbs.) 3/16" 800 lbs. 0.4 3804770 1/4" 1,300 lbs. 0.7 3804788 5/16" 1,900 lbs. 1.1 3800495 3/8" 2,650 lbs. 1.5 3800496

PRICE 0.89/ft. 1.29/ft. 1.79/ft. 2.49/ft.

GRADE 70 TRANSPORT CHAIN

Rust resistant yellow chromate finish. Size 5/16" 3/8"

Safe Working Limit 4,700 lbs. 6,600 lbs.

Wt. (lbs.) 0.9 1.3

ITEM

PRICE

3800844 3800851

2.39/ft. 2.79/ft.

F A R M

TWIN CLEVISES

STUB END TURNBUCKLES • Forged steel quenched and tempered • Heavy duty galvanized • U.S. specification 77-T-791

• Heat treated forged carbon steel • Alloy steel pins • Yellow zinc coated Size Safe Working Wt. ITEM PRICE Load (lbs.) 1/4"-5/16" 4,700 lbs. 0.4 3804580 3.49 3/8" 6,600 lbs. 0.5 3804598 4.49 7/16"-1/2" 11,300 lbs. 1.2 3804572 5.99

Dia. Take-Up 3/8" 1/2" 5/8" 3/4"

Working Wt. ITEM PRICE Load (lbs.) 1,200 lbs. 0.8 3800368 5.99 2,200 lbs. 1.3 3800369 6.49 3,500 lbs. 2.1 3800370 8.99 5,200 lbs. 3.4 3800371 11.99

6" 6" 6" 6"

TURNBUCKLES

• Forged steel quenched and tempered • Heavy duty galvanized • U.S. specification 77-T-791

(A) HOOK x HOOK

Dia. x Take-up 3/8" x 6" 1/2" x 6" 1/2" x 9"

(B) EYE x EYE

Working Wt. ITEM PRICE Working Wt. ITEM PRICE Load (lbs.) Load (lbs.) 1,000 lbs. 0.8 3800357 6.99 1,200 lbs. 0.7 3800358 6.99 1,500 lbs. 1.6 3800360 10.49 2,200 lbs. 1.5 3800361 8.99 1,500 lbs. 2.1 3800351 10.99 2,200 lbs. 1.9 3800363 11.99

Working Load 1,200 lbs. 2,200 lbs. 2,200 lbs.

Wt. (lbs.) 0.9 1.6 1.9

ITEM PRICE 3800359 8.99 3800362 10.49 3800365 13.99

LOADBINDERS

F) RATCHET LOADBINDER D) SMALL LOADBINDER

• A lightweight fastener design for use on truck racks and boat trailers • Breaking strength: 1,250 lbs. • Safe working load: 375 lbs. • Chain cap. 3/16"-1/4" • Open spread 9", take-up 2-3/4" • Lever length: 7-1/2" 99 3800752 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

E) LOADBINDER

• Use with 5/16" or 1/4" chain • Working weight limit: 2,600 lbs. • Breaking strength: 7,800 lbs. 3800030 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2199

• Use with 5/16" or 3/8" chain • Working weight limit: 5,400 lbs. • Breaking strength: 19,000 lbs. 3800031 – Wt. 10.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

4999

G) HEAVY DUTY LOADBINDER

• Special heavy duty model with 2 swivels • Hot drop forged steel, heat treated throughout for max. strength and durability • Non-spread design with clevis pins in handle slot • Special forged steel hook, electric-welded links • Use with 5/16" or 3/8" chain • Working weight limit: 5,400 lbs. • Breaking strength: 19,000 lbs. 99 3800778 – Wt. 7.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HEAVY DUTY RATCHET HOISTS

RATCHET STRAP HOIST

2-TON

• 3-hook style • Double gear construction

• 4,000 lb. pulling cap. • Polyester web strap: 12 ft. x 1-1/16" • Not recommended for lifting 1580869 – Wt. 7.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3999

LIFT WEIGHT: 2,000 LBS., PULL WEIGHT: 4,000 LBS. 8006441 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

4-TON LIFT WEIGHT: 4,000 LBS., PULL WEIGHT: 8,000 LBS. 8006442 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

4999

PADLOCKS

LIFETIME WARRANTY

• 6 pin anti-pick tumbler • Removable and replaceable shackle • Re-pinnable cylinder • Drain holes release moisture and prevent corrosion

A) to C) SOLID BRASS PADLOCKS

Case hardened chrome plated shackle. A) 1" SHACKLE

Same as above in a keyed alike twin pack. 8027173 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F A R M

2399/pr.

B) 3" SHACKLE

1-1/2" wide. 8027164 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1599

C) 2" WIDE BRASS COMBINATION LOCK

• 4 number resettable lock • 1" hardened steel shackle 8026726 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1899

D) U-BAR LOCK

• Resists prying, sawing, and hammer impact • Double locking shackle gives greater pull strength • 7-pin tumbler keyway design provides the highest protection against picking 8026584 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

(E) STEEL CABLE

• 5/8" dia., weather proof • Use to secure power tools, gates, motor cycles, etc. • Use with lock 8026584 above 8026575 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

F) WEATHERPROOF STEEL PADLOCK

• Solid brass cylinder for long life • Double locking device for added security • Case-hardened steel shackle resists sawing • Keyway cover seals out moisture, dirt etc. • Weather proof, resists corrosion in tough weather conditions 1 PC.

999 3 PK. 99 8026600 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 8026593 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SHOP ONLINE

www.princessauto.com VISIT OUR SITE FOR:

• Nickel plated, hardened shackle • 5 pin AM1 keyway and locking steel ball • Steel protective guard plate; all steel body • Triple chrome finish 1-1/2" WIDE BODY, SHORT SHACKLE 8008229 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 1-1/2" WIDE BODY, LONG SHACKLE 8008238 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1099 1099 1-3/4" WIDE BODY, SHORT SHACKLE 99 8008247 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 10 1-3/4" WIDE BODY, LONG SHACKLE 99 8008256 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 11 2" WIDE BODY, SHORT SHACKLE 99 8008265 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 11 2" WIDE BODY, LONG SHACKLE 99 8008292 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 12

• Secure Shopping • Surplus New Items • Store Locations and Hours of Operation • Catalogue Download • Flyer Download

GAS ENGINES

D R I V E Model

C O M P O N E N T S

HP @ 3,600 RPM GX 120 K1 QH 4.0 GX 160 K1 QH 5.5 GX 270 QH 9.0 GX 390 KI QA* 13.0 * with oil guard

Fuel Tank Capacity 0.55 gals. 0.79 gals. 1.32 gals. 1.71 gals.

Shaft Size 3/4" 3/4" 1" 1"

HONDA GC ENGINES • For use on lawnmowers, tillers and other home or light duty equipment • Overhead cam engine • Easy maintenance • Low noise • Built-in timing belt • Idle: 1,700 RPM • Full throttle: 3,600 RPM A) 4 HP ENGINE 4770054 – Wt. 26.4 lbs. . . . . . . . . . . . . . . . . . . . . .

33999

B) 5 HP ENGINE 4770044 – Wt. 26.4 lbs. . . . . . . . . . . . . . . . . . . . . .

35999

20 HP HONDA V-TWIN

12 HP VERTICAL SHAFT ENGINE BRIGGS & STRATTON ®

• Electric start comes with dual circuit alternator • 3.4" bore with a 3" stroke displaces 28.4 cu. in. • Cast iron sleeve, 1" shaft • Ideal for garden tractor replacement • Maxi clean automotive type air filter • Gear driven lubrication system 99 4770517 – Wt. 79.9 lbs. . . . . . . . . . . . . . . . . . . . . .

749

SAE 30 MOTOR OIL

Honda 4-cycle overhead valve gas engines feature: • Sure and easy starting • High fuel economy • Tough durability • Cast iron cylinder sleeves • Easy maintenance, compact, simple to mount • Steady high power • Low noise and vibration O’all dim.: Wt. ITEM PRICE (L x W x H) (lbs.) 12.20" x 13.64" x 12.72" 33.6 4770418 449.99 12.48" x 14.48" x 13.40" 37.0 4770426 499.99 15.20" x 17.20" x 16.40" 61.0 4770459 799.99 15.94" x 17.72" x 17.44" 78.0 4770558 1129.99

• Recommended for 4-stroke lawn mowers and gas powered engines where single grades are specified. • 1 litre Item cannot be shipped. 8003010 – Wt. 2.1 lbs. . . . . . . . . . . . . . . .

299

• Efficient, reliable OHV V-Twin design • 12 volt electric starter with key operated switch • 20 amp charging system • Overhead muffler is up out of the way of any attachments • Fuel consumption 8.1 oz./HP/hr. • Quiet and easy starting • 1" straight shaft • Spin-on type oil filter • Pressure lubricated • O’all dim.: 15.20" x 17.93" x 17.78" 99 4770001 – Wt. 112.5 lbs. . . . . . . . . . . . . . . . . .

2099

SMALL ENGINE MUFFLERS

D A

All mufflers are baffled for quiet tone. • Fits B&S 2-4 HP “Sausage” style with 1/2" pipe for horizontal engines • Replaces B&S 89966 8011885 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

• Fits 8 HP and up, B&S, Kohler, Tecumseh-Lauson, and Wisconsin engines with 1" exhaust pipe • Replaces Kohler O.E.M. #275679 99 4790008 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) LARGE CYLINDER TYPE ENGINE MUFFLER

B) PANCAKE TYPE ENGINE MUFFLER

• Fits B&S 2-4 HP with 1/2" pipe for vertical lawnmowers, Clinton and Tecumseh models • Replaces B&S 298830 8011894 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) LARGE ENGINE MUFFLER

A) CYLINDER TYPE ENGINE MUFFLER

249

• B&S 5-8 HP engines with 3/4" pipe for horizontal engines • Replaces B&S 294599 49 8011901 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

FLYWHEEL PULLER

ENGINE COVER

• Easily and safely removes the flywheel allowing the installation of the contact points, condenser, or electronic ignition shown below • Fits Briggs & Stratton Engines 49 4780474 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRONIC IGNITION ONE SIZE FITS ALL

• Permanently replace troublesome points and condensers on small engines with these sealed computer chips • Multiple firing of spark plugs results in longer spark duration • Gives dependable starts and smoother running engine • Easy installation can be used on B&S, TecumsehLauson, Lawn-Boy, Honda, and others (except Tecumseh engines with cast iron flywheels) • Eliminates starter kickback 99 4780300 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• Fits most standard grain auger motors, logsplitters, etc. • Heavy 1/4" rope drawstring holds cover secure • Silver exterior reflects heat and sunlight • O’all dim.: 23" x 19" x 24" high 2480016 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . .

799

SPARK PLUGS

R I V E

C O M P O N E N T S

TUNE-UP KITS

• Standard size spark plug • Size: 14 mm, 3/8" reach, 13/16" hex • Replaces: Champion J17LM, J8, AC LM46, Autolite A-7 • Most commonly found on 2 to 16 HP 4-cycle Briggs & Stratton gas engines 99 4780227 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . E F • “Shorty” size spark plug • Sizes: 14 mm, 3/8" reach, 3/4" hex For Briggs & Stratton engines • Replaces: Champion CJ-8, RCJ, Fram (Autolite) 245, Fram (Canada) 3345; E) TUNE-UP KIT for B&S Motorcraft AR7N, Bosch W58E • Fits most 2 to 5 HP B&S engines without solid state • Most commonly found on 2 to 16 HP 4-cycle ignition gas engines • Replaces B&S contact point and condenser kit, O.E.M. 99 4780235 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . #294628 • Sizes: 14 mm, 3/8" reach, 3/4" hex • Kit includes: contact point, condenser, spark plug • Replaces: Champion JI9LM #01-574004 and flywheel key #01-535002 99 • Most commonly found on newer 2 to 16 HP 4780144 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-cycle gas engines F) CARBURETOR TUNE-UP KIT for B&S 49 4780111 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . • Kit includes complete diaphragm assembly • Sizes: 14 mm, 3/8" reach, 3/4" hex • Replaces B&S O.E.M. #391681, #391643 • Replaces: NGR BPR6ES • Fits late model 3-1/2 and 4 HP B&S engines with • Most commonly found on 4 to 25 HP Honda automatic choke carburetors; gas engines series 92,000 and 110,000 99 99 4780112 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 4780334 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ENGINE REPAIR BOOKS

AIR FILTERS

R I V E

• Covers maintenance, troubleshooting and repair procedures on engines up to 5 HP • Includes Briggs & Stratton, Honda, Sears Craftsman, and Tecumseh 99 4490587 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . • Covers trouble shooting, repair, and maintenance on engines from 5.5 HP to 20 HP • Includes Briggs & Stratton, Tecumseh/Craftsman, Honda, and Robin 99 4490063 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TECHBOOK SERIES

For Briggs & Stratton • Fits models 92,900 and up with vertical shaft; most 3 and 3-1/2 HP engines • Replaces Briggs & Stratton O.E.M. #270579 99 4780011 – Wt. 0.1 lbs. . . . . . . . .

ASSORTED LAWN MOWER PARTS

C O M P O N E N T S

A A) SMALL ENGINE STARTER HANDLE and ROPE

• Durable, long lasting starter handle with metal insert comes complete with 88" nylon starter rope • Fits most old and new style engines 99 4780383 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) UNIVERSAL LEVER-TYPE THROTTLE CONTROL

C) UNIVERSAL THROTTLE CONTROL

• Lever-type model – all heavy metal lever and mounting bracket • Comes fully assembled with wire swivel, adjustable friction spring washer, 54" inner wire and conduit 99 4780250 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Deluxe lever-type model – all heavy metal lever and mounting bracket • Control mounts between or on side of handle bar • 54" inner wire and conduit 99 4780268 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

CENTRIFUGAL CLUTCH

DRIVELINE HARDWARE

CENTRIFUGAL CLUTCHES ®

350 SERIES REBUILDABLE CLUTCHES

400 SERIES CENTRIFUGAL CLUTCHES

HEADQUARTERS

• 6 sintered metal shoes for the ultimate in proper weight, wear ability and heat dissipating qualities • Ease of installation • Operates under conditions that would destroy most clutches • More contact surface, no slipping when you need the power • Approx. Wt. 2.5 lbs. Bore

5/8" 3/4" 3/4" 1"

# Of Teeth 12 12 10 10

Chain Outside ITEM PRICE Pitch Dia. #35 4" 4760005 44.99 #35 4" 4760013 39.99 #40/41 4" 4760021 39.99 #40/41 4" 4760039 79.99

• Adjustable shoe settings • Better control of acceleration • Greater overload protection • Runs cooler, lasts longer. Use the 350 series for 4-cycle engines and electric motors to 6 HP and 2-cycle engines to 9 HP • “Variable cam” rotor action adjusts for gradual or abrupt engagement • Excellent for industrial and utility applications plus go-carts, etc. • Approx. Wt. 2.0 lbs. Note: All clutches come standard with 1,800/2,000 RPM red engagement springs. 350 SERIES SINGLE PULLEY TYPE

• Use with A or B section belt • Approx. wt. 3.5 lbs. Bore 3/4" 1"

Pulley O.D. 3" 3"

Keyway 3/16" 1/4"

ITEM PRICE 4760112 69.99 4760120 69.99

WORM GEAR SPEED REDUCERS

These economical, high quality worm gear angle drives and speed reducers have hundreds of uses on the farm, at home, and in industry. • Quiet, efficient, fully enclosed, self-locking • Can be driven by belts, pulleys, and chains or direct driven • Rugged cast iron housing, precision machined gears and shafts running on ball bearings • Do not exceed max. input HP • Input shaft: 5/8" dia. • Output shaft: 1" dia. O’all dim.: 9-1/2" x 9-1/2"x 8-1/2" • Max. input speed 1,800 RPM

R I V E

Ratio 15 to 1 30 to 1 40 to 1 60 to 1 100 to 1

Output RPM @ 1,800 RPM Input 120 60 45 30 18

Max. Output (in.-lbs.) 1,000 1,200 1,100 1,200 1,200

Max. Input HP 2-1/2 1-3/4 1-1/4 3/4 1/2

Wt. (lbs.) 30.0 29.7 29.7 29.5 34.6

ITEM

PRICE

3840043 3840046 3840047 3840051 3840127

169.99 169.99 169.99 169.99 189.99

DISC & CALIPER BRAKE ASSEMBLY

SPEED REDUCER with FLANGE MOUNT

A • 60:1 • Type: WE • Mode: 70 • Inlet: 5/8" hollow shaft • Outlet: 1" dia. shaft • Suitable for 1/2 to 1 HP motor 8008416 – Wt. 32.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

19999

TORQ-A-VERTER KIT ®

• Caliper has a total of 8 different lever positions C in either direction of pull (clockwise/counterclockwise) for a total of 16 positions • Brake puck has 1.8 square inches of automotive brake material and is replaceable • Use on RVs, snowmobiles, go-carts, mini bikes, garden tractors and numerous industrial applications A) DISC CALIPER 4760161 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . .

6999

C O M P O N E N T S

B) DISC CALIPER MOUNTING BRACKET

For brake assembly. 4760002 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . • For drive applications • Fits most gas engines • Bolts directly to motor in minutes, no welding required • No misalignment or adjusting of bolt centres • Has a 19 to 1 low ratio and a 5 to 1 high speed ratio • Comes complete with driver and driven pulley, belt, all mounting hardware, and belt guard

1399

C) 6-3/8" DIA DISC

With 1" bore hub. 4760179 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . .

2899

IDLER SPROCKETS

FOR 3/4" SHAFT GAS ENGINES

35 pitch, 12 tooth driver. 4760195 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

26999

BUSHINGS

• Versatile design covers a greater range of bore sizes • All 17 mm bore sprockets can easily be changed to 5/8", 1/2" or 3/8" bore by using a pair of bushings listed below • Hardened tooth, zinc plated finish

Use with 17 mm bore sprockets. I.D. x O.D. Wt. (lbs.) 3/8" x 17 mm 0.1 1/2" x 17 mm 0.1 5/8" x 17 mm 0.1

No. Chain Bore Wt. Teeth Size (lbs.) 17 40 17 mm 0.5 15 50 17 mm 0.4 17 50 17 mm 0.8 13 60 17 mm 0.7 15 60 17 mm 1.0 12 80 3/4" 1.4

REPLACEMENT BELT 4780070 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ITEM 3840133 3840134 3840135

25.99

PRICE 1.49/pr. 1.49/pr. 1.49/pr.

ITEM

PRICE

3840128 3840129 3840130 3840131 3840132 3840067

7.79 8.49 8.79 9.99 10.79 12.99

LUBRICANTS

R I V E

B) MULTI-GEAR 80W90

• Recommended for limited slip differentials • For hypoid axles, gear and steering boxes of cars and trucks • 1 litre container 99 8003027 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Sorry, oils and lubricants cannot be shipped.

C O M P O N E N T S

A) MOTOR OIL

C) SAE 30

SAE 5W30 SD

1 litre container. 8003025 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

SAE 10W30 SD

4 litre container. 8003014 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SAE 10W30

1 litre container. 8003024 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

279

• Recommended for 4 stroke lawn mowers and gas powered engines where single grades are specified • 1 litre container 99 8003010 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) ALL SEASON CHAIN OIL

• Prolongs the life of your chain, bar and sprockets • Designed for year round use • 1 litre container 49 8003023 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

SINGLE STRAND ROLLER CHAIN Connecting links included with all 10 ft. lengths. • Built to ANSI standards • Solid rollers, precision hardened • Pre-stretched, pre-loaded, pre-lubricated • Used by many OEM & industrial accounts • High strength, high speed, long wearing • Use for corn pickers, combines, hammer-mills, swathers, etc. CHAIN ASA No. Pitch

ROLLER CHAIN (10 ft. roll)

Wt. ITEM (lbs.) 35 3/8" 2.4 3842101 40 1/2" 4.4 3842317 41 1/2" 2.9 3850476 50 5/8" 7.2 3842325 60 3/4" 10.9 3842333 60H* 3/4" 12.7 3842135 80 1" 17.5 3842341 * With extra heavy side plates

• For gasolene fueled cars and light duty trucks • Makes cold starting easier

PRICE (per 10 ft.) 11.99 12.49 11.49 18.49 21.49 28.99 43.99

CONNECTING LINK

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1 0.3

ITEM

PRICE Wt. (2 pk.) (lbs.) 0.99 0.1 1.09 0.1 1.19 0.1 1.29 0.1 1.99 0.1 2.09 0.2 3.19 0.3

3840178 3840179 3840180 3840181 3840182 3840183 3840184

OFFSET LINK

ITEM 3840171 3840172 3840173 3840174 3840175 3840176 3840177

PRICE (2 pk.) 1.59 1.79 1.99 2.19 2.99 3.39 5.19

CHAIN LUBE

ROLLER CHAIN TOOLS

• Formulated to lubricate and protect all types of roller chains operating in exposed conditions • 330 g aerosol can • Cannot be shipped 99 6440016 – Wt. 1.0 lbs. . . . . . . . . . .

Makes quick, easy work of roller chain disconnections. E) For use with #25 through #60 chain. 8039311 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) For use with #60 through #100 chain. 8039320 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999 3999

FLEXIBLE COUPLINGS

WELD-ON HUBS

• Machined to eliminate special jigging • Simply clamp hub to sprocket or pulley and weld • Round bore with keyway and set screw

R I V E

FOR DIRECT DRIVE APPLICATIONS

• No lubrication needed • Easily assembled or disassembled • Spiders are easily inspected at any time • No wear on metal jaws • Comes with set screws • Make sure when ordering that body pieces and rubber spider are from the same series COMPLETE COUPLING CONSISTS OF 3 PIECES BODY – SPIDER – BODY

Series Capacity @ 1,200 RPM Capacity @ 1,800 RPM Capacity @ 3,600 RPM Outside diameter O’all length (complete) Approx. wt. Bore size Keyway 1/2" 1/8" 9/16" 1/8" 5/8" 3/16" 3/4" 3/16" 7/8" 3/16" 1" 1/4" 1-1/8" 1/4"

L-095 3.60 HP 5.40 HP 10.8 HP 2-7/64" 2-1/2" 0.6 lbs. ITEM 3840550 3840568 3840576 3840592 3840618 3840634 –

PRICE FOR 1 BODY SPIDER ONLY

L-099 6.00 HP 9.00 HP 17.99 HP 2-17/32" 2-7/8" 1.0 lbs. ITEM 3840675 – 3840691 3840717 3840733 3840758 3840766

3840659

3840774

4.49/ea.

7.49/ea.

SMALL FLEXIBLE COUPLINGS • L050 series is designed for low horsepower applications • Outside diameter: 1-5/64" • Cap. 0.49 HP @ 1,200 RPM, 0.74 HP @ 1,800 RPM, 1.47 HP @ 3,600 RPM • O’all length of 2 couplings with spider: 1-23/32" Bore 1/4" 5/16" 3/8" 1/2" 5/8" Spider only

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1

ITEM 3852019 3852035 3852027 3852191 3852043 3852050

PRICE 2.99/ea. 2.99/ea. 2.99/ea. 2.99/ea. 2.99/ea. 1.99/ea.

• Material: C 1018 round bar • 65,000 lb. tensile strength • Driveline quality round bar • Keyway cut down the entire length of shaft • Custom cut lengths available by special order Key size 1/8" 3/16" 3/16" 1/4" 1/4"

Wt. (lbs.) 1.9 2.9 4.3 7.6 15.3

ITEM 3800514 3801925 3801933 3801941 3800510

Bore Wt. (lbs.) 1/2" 0.4 5/8" 0.3 3/4" 0.3 7/8" 0.3

ITEM 3845096 3845104 3845112 3845120

PRICE 3.49 3.49 3.49 3.49

ITEM 3845138 3845153 3845179 3845195 3845211 3845237 3845252

PRICE 3.99 3.99 3.99 3.99 3.99 3.99 3.99

W-SERIES HUBS

Bore Wt. (lbs.) 1/2" 0.9 5/8" 0.8 3/4" 0.8 7/8" 0.7 1" 0.6 1-1/8" 0.6 1-1/4" 0.5 X-SERIES HUBS

Bore Wt. (lbs.) 5/8" 1.6 3/4" 1.6 7/8" 1.5 1" 1.4 1-1/8" 1.3 1-3/16" 1.3 1-1/4" 1.2 1-3/8" 1.0 1-7/16" 1.1 1-1/2" 1.0

ITEM PRICE 3845294 4.99 3845310 4.99 3845336 4.99 3845351 4.99 3845377 4.99 3845385 4.99 3845393 4.99 3845419 4.99 3845427 4.99 3845435 4.99

WELD-ON PULLEYS

KEYED SHAFTING

Shaft size 1/2" x 3 ft. 5/8" x 3 ft. 3/4" x 3 ft. 1" x 3 ft. 1" x 6 ft.

V-SERIES HUBS

PRICE 23.99 23.99 24.99 31.99 62.99

C O M P O N E N T S

• Fits W-series hubs • Hubs sold separately O.D. Wt. (lbs.) 3-1/2" 0.3 4" 0.4 4-1/2" 0.5 5" 0.7 5-1/2" 0.8 6" 1.0 6-1/2" 1.1 7" 1.3 8" 1.5 9" 1.9 10" 2.5 11" 2.9 12" 3.4 14" 4.4 16" 5.7

ITEM 3845534 3845542 3845559 3845567 3845575 3845583 3845591 3845609 3845617 3845625 3845633 3845641 3845658 3845666 3845674

PRICE 6.99 7.49 7.99 8.69 10.49 10.99 11.99 12.99 13.99 16.99 18.99 21.99 23.99 34.99 41.99

WELD-ON SPROCKETS

SHAFT COLLARS

R I V E

• For most replacement needs • Sprockets and sprocket hubs sold separately • For 3/8", 1/2", 5/8", 3/4" pitch roller chain • Simply weld together

• Collars are made of zinc plated “weldable” mild steel • Comes with set screws Bore Wt. ITEM PRICE (lbs.) 3/16" 0.1 3871266 0.99 1/4" 0.1 3871274 0.99 5/16" 0.1 3871282 0.99 3/8" 0.1 3871290 1.09 7/16" 0.1 3871308 1.09 1/2" 0.1 3871316 1.19 9/16" 0.1 3871324 1.19 5/8" 0.1 3871332 1.29 3/4" 0.1 3871340 1.39 7/8" 0.2 3871357 1.49 1" 0.2 3871365 1.79 1-1/8" 0.2 3871373 1.99 1-1/4" 0.4 3871399 2.79 1-3/8" 0.4 3871407 3.49 1-1/2" 0.4 3871423 3.69

C O M P O N E N T S

FOR USE WITH 3/8" PITCH #35 CHAIN

FOR USE WITH 1/2" PITCH #40 CHAIN

# Fits Wt. ITEM PRICE # Fits Wt. ITEM PRICE Teeth Hub (lbs.) Teeth Hub (lbs.) Series Series 12 V 0.1 3848827 2.29 16 V 0.1 3844008 2.19 13 V 0.2 3844537 2.39 18 V 0.1 3840070 2.39 14 V 0.2 3844545 2.49 20 V 0.1 3844016 2.59 15 V 0.2 3844552 2.49 22 W 0.3 3840072 2.79 16 W 0.2 3844560 2.59 24 W 0.2 3844024 3.19 17 W 0.3 3844578 2.69 26 W 0.3 3840073 3.49 18 W 0.3 3844586 2.99 28 W 0.3 3844032 3.79 19 W 0.4 3844594 3.09 30 W 0.4 3840074 3.89 20 X 0.3 3844602 3.19 36 W 0.7 3844040 5.29 24 X 0.6 3844636 4.59 40 W 0.7 3840076 6.29 26 X 0.7 3844644 4.89 45 W 0.9 3840077 6.59 28 X 0.9 3844651 5.59 48 W 1.1 3844057 7.29 30 X 1.0 3844669 6.29 60 W 1.7 3844065 9.79 32 X 1.3 3844677 7.89 72 W 2.5 3844073 11.99 36 X 1.8 3844685 8.99 FOR USE WITH 5/8" PITCH 40 X 2.1 3844693 10.49 #50 CHAIN 45 X 2.6 3844701 12.69 # Fits Wt. ITEM PRICE 48 X 3.1 3844719 13.89 Teeth Hub (lbs.) 54 X 3.9 3844081 16.79 Series 60 X 4.9 3844099 18.99 10 V 0.2 3844727 2.99 11 V 0.2 3844735 3.19 FOR USE WITH 3/4" PITCH #60 CHAIN 12 W 0.2 3844743 3.39 13 W 0.3 3844750 3.69 # Fits Wt. ITEM PRICE 14 W 0.3 3844768 3.69 Teeth Hub (lbs.) Series 15 W 0.4 3844776 3.89 16 W 0.5 3844784 3.99 9 V 0.3 3844917 3.49 17 X 0.5 3844792 4.29 11 V 0.4 3844933 3.79 18 X 0.6 3844800 4.29 12 W 0.5 3844941 4.09 19 X 0.7 3844818 4.79 13 W 0.6 3844958 4.49 22 X 1.1 3840078 5.59 14 W 0.8 3844966 4.89 24 X 1.3 3844859 6.79 15 X 0.8 3844974 5.29 26 X 1.6 3844867 7.39 16 X 0.9 3844982 6.19 28 X 1.9 3844875 7.79 18 X 1.3 3845005 6.49 32 X 1.0 3840079 10.49 20 X 1.8 3840090 7.19 36 X 3.3 3844909 13.19 22 X 2.2 3845047 8.99 42 X 4.6 3840084 16.19 24 X 2.7 3840091 9.99 48 X 6.2 3840088 19.99 26 X 3.2 3840093 10.99 54 X 8.1 3844107 22.99 28 X 3.9 3840098 11.99 60 X 9.8 3844115 27.99 30 X 4.5 3845088 14.49 34 X 5.9 3840107 16.99 Note: 42 X 9.3 3840112 23.49 We recommend using low 48 X 12.2 3840114 28.99 hydrogen electrodes for welding. 54 X 16.1 3840115 37.99

Designed to fit on splined shafts.

• For “4L” or “A” belts • Cast zinc construction; with set screws • Suitable for fractional HP applications Bore Wt. (lbs.)

ITEM

PRICE

3843067 3843075 3843083

4.39 5.29 5.29

0.3 0.3 0.4

3843091 3843109 3843117

5.49 5.49 5.69

0.5 0.5 0.5

3843125 3843133 3843141

5.79 6.29 6.29

0.6 0.5 0.4

3843158 3843166 3843174

7.99 7.99 7.99

0.8 0.7 0.7

3843182 3843190 3843208

8.29 8.29 9.29

0.7 0.7 0.6

3843216 3843224 3843232

8.99 8.99 8.99

0.9 0.8 0.7

3843240 3843257 3843265

9.49 9.49 9.49

1.0 1.0 0.9

3843273 10.99 3843281 10.99 3843299 10.99

2" O.D.

1/2" 5/8" 3/4"

0.2 0.2 0.2

2-1/2" O.D.

1/2" 5/8" 3/4" 3" O.D.

1/2" 5/8" 3/4"

3-1/2" O.D.

1/2" 5/8" 3/4" 4" O.D.

1/2" 5/8" 3/4"

4-1/2" O.D.

1/2" 5/8" 3/4" 5" O.D.

1/2" 5/8" 3/4"

W-SERIES SPLINED HUBS

7/8" x 13-spline. 3840469 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4" x 14-spline. 3840485 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SINGLE GROOVE V-BELT PULLEYS

6" O.D.

12 1299 99

1/2" 5/8" 3/4"

2 PC EXTRA SET SCREWS 3851490 – Wt. 0.1 lbs. . . . 89¢/pkg.

BELT DRESSING

V-BELTS • Tempered polyester cords for high tensile strength and low elongation • Anti-static, heat and oil resistant • Meet or exceed ISO, JIS, BS, SAE, KS, and RMA standards • V-BELT SIZES measured as follows: A SECTION – 1/2" top width B SECTION – 21/32" top width • To determine size, measure the outside circumference of the belt and subtract 2" if “A” BELT and 3" if “B” BELT Size F.H.P. Series* Wt. (lbs.) ITEM PRICE A22 4L-240 0.2 3860012 2.59 A26 4L-280 0.2 3860020 2.59 A28 4L-300 0.2 3860038 2.59 A29 4L-310 0.2 3860046 2.59 A30 4L-320 0.2 3860053 2.69 A31 4L-330 0.2 3860061 2.79 A32 4L-340 0.2 3860079 2.79 A33 4L-350 0.2 3860087 2.79 A34 4L-360 0.2 3860095 2.89 A35 4L-370 0.3 3860103 2.89 A36 4L-380 0.2 3860111 3.09 A37 4L-390 0.3 3860129 3.09 A38 4L-400 0.3 3860137 3.29 A39 4L-410 0.3 3860145 3.49 A40 4L-420 0.3 3860152 3.49 A41 4L-430 0.3 3860160 3.69 A43 4L-450 0.3 3860178 3.69 A46 4L-480 0.3 3860186 3.69 A50 4L-520 0.4 3860008 4.29 A56 4L-580 0.4 3860009 4.79 A58 4L-600 0.4 3860010 4.99 B29 5L-320 0.3 3860011 3.89 B40 5L-430 0.4 3860194 5.39 B42 5L-450 0.5 3860202 5.59 B46 5L-490 0.5 3860210 5.99 B48 5L-510 0.5 3860228 6.29 B51 5L-540 0.5 3860236 6.59 B55 5L-580 0.6 3860244 7.09 B58 5L-610 0.6 3860251 7.49 B62 5L-650 0.7 3860269 7.99 B66 5L-690 0.4 3860277 8.59 B70 5L-730 0.7 3860013 8.99 B71 5L-740 0.7 3860285 9.09 B75 5L-780 0.8 3860293 9.59 B80 5L-830 0.9 3860301 10.29 B85 5L-880 0.9 3860319 10.89 B90 5L-930 1.0 3860327 11.49 B95 5L-980 1.0 3860335 12.29 B100 5L-1030 1.0 3860343 13.09 B105 5L-1080 1.1 3860350 13.59 B112 5L-1150 1.2 3860368 14.69 B120 5L-1230 1.6 3860376 15.69

• Stops squeals and protects against belt slippage • Prevents premature wear and extends belt life by conditioning against drying and cracking • Suitable for fan belts, power steering belts, water pumps, and power tools • 340 g can • Cannot be shipped 99 6430169 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . .

IDLER PULLEY

• 4" dia. • 1" wide flat groove • 5/8" bore with bearings • Ideal for use as a V-belt tightener 3845500 – Wt. 0.8 lbs. . . . . . . . . . . . . .

2399

KEYSTOCK Sold in 12" lengths

Size Wt. (lbs.) 3/16" x 12" 0.1 1/4" x 12" 0.2 5/16" x 12" 0.3 3/8" x 12" 0.5

R I V E

C O M P O N E N T S

ITEM PRICE 3805132 1.69 3805140 1.99 3805116 2.69 3805124 3.29

TECH TIP For safety reasons, it's always a good idea to check your V-belt for wear and tear periodically.

* Common fractional horsepower (F.H.P.) series cross-reference

V-BELT STEP PULLEYS • For “4L”, “A” belts or “5L”, “B” belts; suitable for fractional HP applications • Cast zinc construction; complete with set screws O.D. 1st Step O.D. 2nd Step O.D. 3rd Step O.D. 4th Step 1-3/4" 2-1/2" 3-1/2" – 1-3/4" 2-1/2" 3-1/2" – 1-3/4" 2-1/2" 3-1/2" – 1-3/4" 2-1/2" 3" 4"

Bore Wt. (lbs.) 1/2" 1.0 5/8" 1.1 3/4" 1.0 5/8" 1.6

ITEM 3843745 3843752 3843760 3843810

PRICE 12.49 12.49 12.49 19.99

D R I V E

C O M P O N E N T S

FINISHED BORE SHEAVES • Complete single groove cast iron sheaves; hollow head statically balanced • Combination groove will fit “4L” or “A” belts and “5L” or “B” belts • 5/8", 3/4", 7/8" bore has set screw and keyway; 1/2" bore has set screws only Model Outside Wt. No. Dia. (lbs.) BK24 2.4" 0.7 BK25 2.5" 0.8 BK26 2.6" 0.5 BK27 2.7" 0.8 BK28 2.95" 1.0 BK30 3.15" 1.1 BK32 3.35" 1.3

1/2" BORE

ITEM PRICE 3850045 4.99 3850046 4.99 3850048 5.79 – – – – – – – –

5/8" BORE

ITEM 3850922 3850955 3850989 3851011 3851045 3851078 3851102

PRICE 5.69 5.69 6.19 6.49 6.99 7.59 8.49

3/4" BORE

ITEM 3850058 3850059 3850997 3850049 3850050 3850051 3850052

PRICE 5.69 5.69 6.19 6.49 6.99 7.59 8.49

7/8" BORE

ITEM – – – 3850053 3850055 3850056 3850057

PRICE – – – 6.49 6.99 7.59 8.49

CAST IRON SHEAVES SINGLE GROOVE SHEAVES

With combination groove that will fit “4L” or “A” belts and “5L” or “B” belts. Model No. Outside Dia. Wt. (lbs.) BK30H 3.15" 1.3 BK32H 3.35" 1.5 BK34H 3.55" 1.5 BK36H 3.75" 1.5 BK40H 3.95" 1.6 BK45H 4.25" 2.0 BK50H 4.75" 2.3 BK55H 5.25" 2.9 BK60H 5.75" 3.3 BK65H 6.25" 3.8 BK70H 6.75" 3.7 BK80H 7.75" 4.4 BK90H 8.75" 4.7 BK100H 9.75" 6.0 BK110H 10.75" 7.2 BK120H 11.75" 8.2

DOUBLE GROOVE SHEAVES

ITEM 3851128 3851136 3851144 3851151 3851169 3851177 3851185 3851433 3851250 3851193 3851201 3851219 3851227 3851235 3850066 3851243

PRICE 7.99 8.99 9.49 9.99 10.49 10.99 11.49 12.49 13.99 15.99 16.49 18.99 22.49 26.99 29.99 32.99

STEEL BUSHINGS SPLIT TAPERED BUSHING with KEYWAY

• Easy to mount, easy to remove • Choose a bushing with the desired bore diameter and a sheave with the desired outside diameter • Bolt the bushing and the sheave together to form a complete pulley that clamps tightly on shaft • Bolts can also be used to remove unit from shaft

2-BOLT FLANGE BEARING ASSEMBLIES

• For use on applications of 5 HP and over • Extra groove prevents slippage • Fits “4L” or “A” belts and “5L” or “B” belts Model No. Outside Dia. Wt. (lbs.) ITEM PRICE 2BK32H 3.35" 2.4 3850310 15.49 2BK34H 3.55" 2.6 3850328 15.99 2BK36H 3.75" 2.6 3850336 17.99 2BK40H 3.95" 2.8 3850344 18.49 2BK45H 4.25" 3.4 3850351 18.99 2BK50H 4.75" 4.1 3850369 19.99 2BK55H 5.25" 4.7 3850377 22.49 2BK60H 5.75" 5.3 3850385 23.99 2BK65H 6.25" 5.8 3850064 26.99 2BK70H 6.75" 6.5 3850063 28.49 2BK80H 7.75" 7.8 3850393 33.99 2BK90H 8.75" 9.0 3850060 39.99 2BK120H 11.75" 14.9 3850065 52.99 Model No. Bore Dia. Wt. (lbs.) HX1/2 1/2" 0.9 HX5/8 5/8" 0.8 HX3/4 3/4" 0.8 HX7/8 7/8" 0.8 HX1 1" 0.7 HX1-1/8 1-1/8" 0.6 HX1-1/4 1-1/4" 0.5 HX1-3/8 1-3/8" 0.4 HX1-1/2 1-1/2" 0.3

ITEM PRICE 3850075 5.99 3851300 5.99 3851318 5.99 3851326 5.99 3851342 5.99 3851367 5.99 3851383 5.99 3851409 5.99 3851425 5.99

STEADY BEARINGS • For P.T.O. drive shafts and other similar applications • Medium duty self-aligning bronze bearing Wt. 0.4 lbs.

Wt. 0.8 lbs.

3870169 – 1/2" 3870177 – 5/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TURNTABLE BEARINGS A B

100

/ea.

3870557 – 3/4" 3870573 – 7/8" 3870581 – 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799/ea.

• All metal construction • Turn on ball bearings • Mounts to metal, wood or plastics Size Load Cap. Wt. (lbs.) ITEM PRICE A 3" square 200 lbs. 0.2 3870001 2.49 A 4" square 300 lbs. 0.3 3870002 2.99 A 6" square 500 lbs. 0.5 3870004 4.49 B 9" round 750 lbs. 1.0 3870005 7.99 B 12" round 1,000 lbs. 1.7 3870006 10.99

BEARING ASSEMBLIES

A) BEARINGS with ECCENTRIC LOCKING COLLAR

Size 1/2" 5/8" 3/4" 7/8" 1"

Wt. (lbs.) 0.3 0.3 0.4 0.5 0.4

ITEM

PRICE

3870070 3870912 3870920 3870938 3870953

5.99 5.99 5.99 6.49 6.49

B) PILLOW BLOCK with BEARING

Wt. ITEM (lbs.) 1.1 3870003 1.2 3870011 1.4 3870029 1.7 3870037 1.7 3870052

C) FLANGE MOUNT with BEARING

PRICE Wt. ITEM (lbs.) 8.99 1.0 3870071 8.99 0.9 3870072 8.99 1.2 3870185 8.99 1.7 3870041 8.99 1.7 3870219

D D) 2 PC. PRESSED STEEL with BEARING

PRICE Wt. (lbs.) 8.99 0.6 8.99 0.5 8.99 0.7 8.99 0.9 8.99 0.8

ITEM PRICE 3870326 3870334 3870342 3870359 3870375

8.99 8.99 8.99 8.99 8.99

BEARING COMPONENTS Create your own bearing assembly by inserting the bearing size you need into the housing of your choice.

E) BEARINGS WITH ECCENTRIC LOCKING COLLAR

Size

Wt. (lbs.) 1-1/8" 0.7 1-3/16" 0.7 1-1/4" 1.2 1-3/8" 1.1 1-7/16" 1.0 1-1/2" 1.5 1-5/8" 1.6 1-3/4" 1.5 1-15/16" 1.7

ITEM

PRICE

3870961 3870979 3870987 3870050 3870051 3871027 3870053 3871043 3870049

6.99 6.99 9.29 9.29 9.29 12.49 13.99 14.49 16.49

F) PILLOW BLOCK HOUSING

Wt. ITEM (lbs.) 2.1 3870054 2.1 3870054 2.4 3870055 2.4 3870055 2.4 3870055 2.9 3870056 3.2 3870057 3.2 3870057 4.2 3870058

G) FLANGE MOUNT HOUSING

PRICE Wt. (lbs.) 3.49 1.6 3.49 1.6 3.99 2.2 3.99 2.2 3.99 2.2 4.49 2.5 5.49 3.1 5.49 3.1 5.99 3.3

H) PRESSED STEEL HOUSING

ITEM PRICE Wt. ITEM PRICE (lbs.) 3870059 3.49 0.6 3870068 2.19 3870059 3.49 0.6 3870068 2.19 3870061 3.99 0.7 3870069 3.59 3870061 3.99 0.7 3870069 3.59 3870061 3.99 0.7 3870069 3.59 3870062 4.49 – – – 3870064 5.49 – – – 3870064 5.49 – – – 3870065 5.99 – – –

REPLACEMENT BALL BEARINGS

• Light and medium series bearing are sealed on both sides • Bearing numbers represent the common standard numbering for all ball bearings

Bearing No. 6200-2RS 6201-2RS 6202-2RS 6202-16-2RS 6202-5/8-2RS 6203-2RS 6203-5/8-2RS 6203-3/4-2RS 6204-2RS 6205-2RS 6205-1-2RS 6206-2RS 6304-2RS

O’all Dim. (mm) Wt. (lbs.) 10 I.D. x 30 O.D. x 9 W 0.1 12 I.D. x 32 O.D. x 10 W 0.1 15 I.D. x 35 O.D. x 11 W 0.1 16 I.D. x 35 O.D. x 11 W 0.1 5/8" I.D. x 35 O.D. x 11 W 0.1 17 I.D. x 40 O.D. x 12 W 0.2 5/8"I.D. x 40 O.D. x 12 W 0.2 3/4"I.D. x 40 O.D. x 12 W 0.1 20 I.D.x 47 O.D. x 14 W 0.2 25 I.D. x 52 O.D. x 15 W 0.3 1" I.D. x 52 O.D. x 15 W 0.3 30 I.D. x 62 O.D. x 16 W 0.5 20 I.D. x 52 O.D. x 15 W 0.3

ITEM 3850609 3850617 3850625 3850633 3850641 3850658 3850666 3850674 3850682 3850690 3850708 3850716 3850823

PRICE 1.69/ea. 1.69/ea. 1.79/ea. 2.39/ea. 2.39/ea. 1.79/ea. 2.69/ea. 2.69/ea. 2.79/ea. 2.79/ea. 3.99/ea. 7.99/ea. 4.19/ea.

O.D. 3/4" 7/8" 1" 7/8" 1" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2"

Oil impregnated, self lubricating, bronze bushings.

R I V E

C O M P O N E N T S

SINTERED BRONZE BUSHINGS Wt. 0.1 lbs.

Bore 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2"

O.D. Length 3/8" 1" 1/2" 1" 1/2" 1" 5/8" 1" 3/4" 1" 5/8" 1" 3/4" 1" 7/8" 1"

ITEM 3872009 3872017 3872025 3872033 3872041 3872058 3872066 3872074

PRICE 3.19/pr. 3.59/pr. 3.19/pr. 3.99/pr. 5.19/pr. 3.29/pr. 4.49/pr. 5.69/pr.

Bore 5/8" 5/8" 5/8" 3/4" 3/4" 7/8" 7/8" 1" 1" 1"

Length 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2"

ITEM 3872082 3872090 3872108 3872116 3872124 3872132 3872140 3872157 3872165 3872173

PRICE 3.99/pr. 5.49/pr. 6.99/pr. 4.19/pr. 5.19/pr. 3.99/pr. 5.99/pr. 3.69/ea. 5.19/ea. 6.49/ea.

101

P R E S S U R E

CONSUMER CLASS

CONSUMER CLASS We recommend these models for up to 3 hours of use per week. For applications such as washing your car, sidewalk, lawn mower, and home.

Bertolini

TECH TIP PSI and GPM are important factors to consider when buying your pressure washer. The type of pressure washer you select should be based on your application. PSI, or Pounds per Square Inch, is the measurement of water pressure. GPM, or Gallons Per Minute, is the measurement of water volume pumped over time. You can successfully clean many surfaces through the proper combination of GPM and PSI.

W A S H E R S

Both pressure washers feature: • Thermal relief valve and downstream soap injection • 25 ft. hose and 18" wand with high/low adjustable nozzle A) 2.9 GPM @ 2,200 PSI GAS

• 5 HP Honda overhead cam engine • Bertolini triplex plunger pump with ceramic coated, hardened steel plungers 5790115 – Wt. 75.0 lbs. . . . . . . . . . . . . . . . . . . . . .

67999

B) 2.0 GPM @ 1,000 PSI

• 1.5 HP, 115 volts, 13 amp A.O. Smith motor • Comet 3-piston pump with solid ceramic plungers 5790114 – Wt. 67.9 lbs. . . . . . . . . . . . . . . . . . . . . .

59999

COMMERCIAL/AGRICULTURAL CLASS

COMMERCIAL/AGRICULTURAL CLASS We recommend these models for up to 20 hours of use per week. For applications such as vehicle washing, store front cleaning, and plant maintenance.

Bertolini 3.5 GPM @ 2,000 PSI

102

• 5 HP, 230 volt, 21 amp electric motor • Bertolini pump features; industrial grade ball bearings, 1-piece extra wide connecting rods, polished solid ceramic plungers and an oversize die cast aluminum crankcase all designed to extend pump life • Bolt-on unloader valve and chemical injection system for easy maintenance • Thermal relief valve on pump • Includes 30 ft. hose, 27-1/2" insulated wand, quick change coupler at gun to hose connection, and 2 quick change nozzles 99 5790089 – Wt. 115.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1099

COMMERCIAL/AGRICULTURAL CLASS

R E S S U R E

Bertolini

These gas powered Pressure Washers feature: • Honda overhead valve engines with low oil protection • Bertolini pumps featuring: industrial grade ball bearings, 1-piece extra wide connecting rods, polished solid ceramic plungers, and an oversize die cast aluminum crankcase, all designed to extend pump life • Thermal relief valves on the pumps • Bolt-on unloader valves and chemical injection systems for easy maintenance • 30 ft. high pressure hoses, insulated wands, quick change couplers at gun to hose connection, and 2 quick change nozzles included

A) 3 GPM @ 2,000 PSI GAS

• 5.5 HP • 27-1/2" wand 5791066 – Wt. 92.3 lbs. . . . . . . . . . . . . . . .

99999

B) 4 GPM @ 2,500 PSI GAS

• 9 HP • 35-1/2" wand 8006150 – Wt. 128.0 lbs. . . . . . . . . . . .

134999

CONTRACTOR/INDUSTRIAL CLASS

Contractor/Industrial Class We recommend these

models for 20 hours or more of use per week. For applications such as contract cleaning, paint preparation, washing trucks, and heavy equipment.

A S H E R S

Bertolini

4 GPM @ 3,000 PSI

Battery comes dry. Please fill at an authorized service centre.

• 13 HP Honda overhead valve engine with oil alert and electric start with battery • This Bertolini pump's features include: premium industrial grade roller bearings, oversized 2-piece connecting rods, PTFE anti-friction coated plunger rods, polished solid ceramic plungers, and oversize anodized die cast aluminum crankcase all designed to extend pump life • 2:1 gear box drives pump slower for longer life • Bolt-on unloader valve and chemical injection system for easier maintenance • Thermal relief valve to help protect pump from overheating • 50 ft. high pressure hose, 35-1/2" insulated wand, quick change coupler at gun to hose connection and 5 quick change nozzles 99 5790093 – Wt. 220.0 lbs. . . . . . . . . . . . . . . . . .

2199

103

PRESSURE WASHER CARTS

P R E S S U R E

B A) 14-1/2" x 10-1/2" BASE

• 10" pneumatic tires • Pre-drilled for nozzle holders and engine mounting 8038991 – 40.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Pre-drilled for nozzle and engine mounting • 13" pneumatic tires • Handle angle can be adjusted 5790094 – 40.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

9999

PRESSURE WASHER PUMPS See page 108 for unloader valves and other accessories!

W A S H E R S

7999

B) 20" x 13-1/2" BASE

C) 3 GPM @ 2,000 PSI PUMP ASSEMBLY

• Features industrial grade ball bearings, 1-piece extra wide connecting rods and polished solid ceramic plungers • Replacement pump for 5791066 and 8031453 gas washers • Requires 5.5 HP gas engine • For use with unloader valve 5790009 99 8051403 – Wt. 15.2 lbs. . . . . . . . . . . . . . . . . . . . .

349

D) 3.5 GPM @ 2,000 PSI PUMP ASSEMBLY

• Features premium industrial grade roller bearings, oversized 2-piece connecting rods, and polished solid ceramic plungers • Replacement pump for 5790089 electric washer • Requires 5.0 HP, 3,450 RPM electric motor • For use with unloader valve 5790009 (must be recalibrated when installed) 99 8051181 – Wt. 15.5 lbs. . . . . . . . . . . . . . . . . . . . .

Bertolini

349

E) 4 GPM @ 3,000 PSI PUMP ASSEMBLY

• Features premium industrial grade roller bearings, oversized 2-piece connecting rods, and polished solid ceramic plungers • Replacement pump for 5790075 and 5790092 gas washers • Requires 11 HP gas engine • For use with unloader valve 5790010 99 8050262 – Wt. 20.9 lbs. . . . . . . . . . . . . . . . . . . . .

499

TECH TIP MAINTENANCE TIPS NOZZLE WEAR – Depending on water conditions, you will typically see a loss of pressure due to nozzle

wear after only 30 hours of use. PUMP CRANKCASE OIL – Should be changed after the first 2 hours of use and then after every 50 hours of

104

use to maintain proper crankcase lubrication and cooling. A 30 weight non-detergent oil is recommended. Check valves should be inspected every 100 hours. WINTER STORAGE – Circulate a 50/50 mix of antifreeze and water through the machine making sure to displace all existing water and other chemicals. Next, blow low pressure compressed air (30-70 PSI) through the system to get as much of the mix out as possible. Be sure both the pump pressure and bypass lines are clear. Do not change or drain the pump oil. Oil breaks down with time so a fresh oil change before storage is false insurance. Best practice is to change the oil first thing in the spring.

PRESSURE WASHER PUMP OIL

Synthetic blend 30 weight non-detergent with anti-oxidizing, and rust inhibiting additives. 500 ml

799 99 8026156 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 8026147 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 litre

PRESSURE WASHER HOSE

• For use on high pressure washers • 3,000 PSI max. • Working temperatures from 4° to 121°C (40°F to 250°F) allows use with either hot or cold water units • 1 swivel fitting and 1 solid fitting • 3/8" NPT male ends with bend guards Length Wt. (lbs.) ITEM PRICE 30 ft. 6.3 8027235 54.99 50 ft. 10.4 8027244 89.99 75 ft. 15.8 8027253 129.99 100 ft. 20.9 8027262 149.99

PRESSURE WASHER HOSE REELS

B) 4,000 PSI 8055908 – Wt. 11.7 lbs. . . . . . . . . . . . . . . .

W A S H E R S

• All steel construction with brass swivel • 3/8" NPT hose connections • Holds up to 100 ft. of 3/8" NPT or 60 ft. of 1/2" NPT hose A) 3,000 PSI 5790142 – Wt. 16.2 lbs. . . . . . . . . . . . . . . .

R E S S U R E

7999 9999

PRESSURE WASHER GUNS • A, B, C: High impact nylon handle remains comfortable while spraying hot or cold water • All guns have a max. temp. of 150°C/(300°F) Flow Max. Inlet Outlet Wt. ITEM GPM PSI (lbs.) C 8.0 2,200 3/8" 1/4" 0.9 5790084 D 7.0 3,100 3/8" 1/4" 0.8 5790021 E 10.5 4,660 3/8" 1/4" 1.2 5790037 E* 10.5 4,660 3/8" 1/4" 1.2 5790058 F 10.5 4,100 M22 M22 1.3 5790098 * Weeping gun. Helps protect your pump.

D C PRICE 29.99 29.99 34.99 34.99 39.99

F E

HIGH PRESSURE ROTARY BRUSHES • Rotary brushes provide friction and pressure to force off stuck-on grime and film • 1/4" male connection • 2.0 GPM min., 10.5 GPM max. @ 870 PSI WHITE NYLON BRISTLES for HARDER TO CLEAN AREAS 5790127 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HORSE HAIR BRISTLES for PAINTED SURFACES 5790126 – Wt. 1.9lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999 3499

105

P R E S S U R E

W A S H E R S

PRESSURE WASHER WANDS • 4,100 PSI max. • 1/4" NPT inlet • 10.5 GPM max. flow • 150°C (300°F) max. temperature • 1/4" female quick coupler outlet (excluding #5790034) Lance style Length Wt. (lbs.) ITEM PRICE 18" 0.8 5790034 9.99 A Straight 27.5" 1.2 8027191 16.99 A Straight 35.5" 1.5 8027217 18.99 A Straight 47" 2.1 8027226 21.99 A Straight 27.5" 1.2 8017362 18.99 B Bent tip 35.5" 1.4 8017371 19.99 B Bent tip 59" 2.3 8017380 24.99 B Bent tip 79" 2.9 8017399 28.99 B Bent tip

C) 35" WAND*

Male M18 outlet and female M22 x 1.5 swivel inlet. 5790100 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3299

D) DOUBLE INSULATED LANCE

• 41" long with low/high pressure switching handle for soap application • Fits popular model Karcher™ pressure washers 99 5790071 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ROTOMAX ROTATING 0° NOZZLE

QUICK COUPLERS E

E) BRASS SOCKETS

Thread

Wt. PSI GPM (lbs.)

1/4" Male 5,500 3/8" Female 3,500 3/8" Male 3,500

6 10 10

0.2 0.2 0.2

ITEM

PRICE

8032498 8032522 8032531

6.99 6.99 6.99

ITEM

PRICE

8032513 8032540 8032559

2.99 3.99 3.99

F) STEEL PLUGS

Thread

Wt. PSI GPM (lbs.)

1/4" Male 3,500 3/8" Female 2,700 3/8" Male 2,700

6 10 10

0.2 0.2 0.2

1/4" QUICK COUPLER SET

Brass socket and steel plug. 8006987 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

COLOUR CODED QUICK CHANGE NOZZLES • Quick change nozzles give you the flexibility to change tips for different spray angles quickly from a high impact 0° stream to a flat 40° fan • Colour coded rubber nozzle guards identify the nozzle type and help protect the nozzle and the surface being sprayed from contact damage • Hardened stainless steel construction for increased durability • 4,000 PSI max.

106

PRICE . . . . . . . . . . . . . . . . . . . . . . . . . .

749/ea.

799

• Increases cleaning and paint prepping efficiency of your pressure washer • Reduces the time needed to do a job by providing all the impact of a regular 0° nozzle, but with 15° of coverage • 80°C (176°F) max. temperature • 1/4" female NPT inlet Flow Range Max. Press. Wt. ITEM PRICE 1.5 - 2.6 GPM 2,200 PSI 0.4 8016577 79.99 2.9 - 3.9 GPM 3,100 PSI 0.8 8016586 99.99 4.2 - 5.5 GPM 5,000 PSI 0.8 8016595 129.99 NOZZLE REPAIR KITS

Nozzle Type 2,200 PSI 3,100 PSI 5,000 PSI Orifice Size 3.0 3.5 4.0 4.5 5.0

Wt. (lbs.) 0.1 0.1 0.6

0° (red) – – 5710538 5710579 5710163

ITEM 8032265 8032283 8032292

15° (yellow) 5710208 5710311 5710546 5710587 5710164

25° (green) 5710209 5710312 5710553 5710595 5710166

PRICE 34.99 49.99 59.99 40° (white) 5710210 5710313 5710561 5710603 5710167

LOW PRESSURE SOAP NOZZLE

• Black low pressure nozzle for chemical injection • Spray pattern: 50° 5710611 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

749

HIGH PRESSURE SPRAY NOZZLE SELECTION

Nozzle Spray Patterns

P 0°

15°

25°

40°

APPROXIMATE GALLONS PER MINUTE (GPM)

Spray Patterns PRICE Orifice Size 0° 25° 40° 3.0 5710447 5710454 5710462 6.99 4.0 – 5710488 5710496 6.99 4.5 5710504 5710512 5710520 6.99 5.0 – 5710124 5710125 6.99 6.0 – 5710143 5710144 6.99 7.0 – 5710146 5710147 6.99

Orifice 800 Size PSI 3.0 1.4 4.0 1.8 4.5 2.0 5.0 2.2 6.0 2.7 7.0 3.1

1000 PSI 1.5 2.0 2.2 2.5 3.0 3.5

1200 PSI 1.6 2.2 2.4 2.8 3.3 3.9

1500 PSI 1.8 2.5 2.8 3.1 3.7 4.3

2000 PSI 2.1 2.8 3.0 3.6 4.2 4.6

2500 PSI 2.4 3.1 3.6 4.0 4.7 5.5

3000 PSI 2.6 3.5 3.9 4.4 5.2 6.1

3500 PSI 2.7 3.8 4.3 4.7 5.6 6.5

4000 PSI 2.8 4.0 4.5 5.0 6.0 7.0

A worn nozzle drastically reduces the maximum pressure output of a pressure washer. To choose a replacement nozzle, follow the steps below: 1. Determine your correct orifice size. Many manufacturers will imprint a code which will tell you the spray angle and the orifice size. For example, on nozzles such as “25040”; the “25” means it has a 25° spray angle and “040” means it has a 4.0 orifice size. 2. If your nozzles do not have any identification, determine the pressure rating and flow rating (GPM) of your pressure washer. This can often be found on the manufacturer’s serial plate or manual. 3. Using the chart, read across the top to the “PSI” of your pressure washer. 4. Read down the column to the GPM of your pressure washer. The correct orifice size is the number in the far left column. 5. Now that you have the correct orifice size, using the chart to the right, read down the first column to the orifice you have. Then read across to find the item number for the spray angle you require.

PRESSURE WASHER HEADS A

LOW PRESSURE SOAP NOZZLE

6.5 orifice, 60° spray. 8005231 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . C D

699

HIGH PRESSURE LIQUID FILLED GAUGES

R E S S U R E

W A S H E R S

A) DRAIN NOZZLE

• Fits onto the end of 1/4" hose • Hose is fed into plugged drain while attached to pressure washer and nozzle is pushed into blockage • When trigger is pressed, water is forced through nozzle orifice and through extra holes in back of nozzle, blowing apart clog 99 5790129 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) ADJUSTABLE PRESSURE NOZZLE HOLDER

• 1/4" female inlet and outlet • Turn to adjust pressure from low to high setting • 3,600 PSI max. • 150°C (300°F) max. temperature 99 5790023 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) ADJUSTABLE PRESSURE NOZZLE HOLDER Same as item B), but equipped with large rubber

nozzle protector. 8016568 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1399

• 1/4" NPT inlet • Stainless steel construction • 2-1/2" dia. aluminum dial • Scale shows PSI and kPa (kilopascal) Pressure 0 - 2,000 PSI 0 - 4,000 PSI

Wt. (lbs.) 0.8 0.8

ITEM 8006830 8006831

PRICE 14.99 14.99

D) VARIABLE FAN NOZZLE

• Orifice size: 1.5 mm • Nozzle size: 5.5 mm • Fan pattern adjustment from 0° to 50° • Push/pull for high to low pressure • 3,000 PSI max. • 100°C (210°F) max. temp. • Inlet: 1/4" FNPT 8032452 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TECH TIP

3999

Be sure to use teflon tape or a similar, non-permanent thread sealant when installing threaded nozzles.

107

CLEANING CHEMICALS A

All our Pressure Washer Cleaning Chemicals are concentrated solutions that can be diluted up to 80:1.

R E S S U R E

W A S H E R S

A) POWERWASH DETERGENT

• A concentrated biodegradable detergent for use with cold or hot water pressure washers • Applications include: vehicle exteriors, industrial and farm equipment, dairy, chicken and hog production facilities, building exteriors, decks, and driveways • Safe on painted surfaces, plastics, concrete, and wood 4 LITRE JUG 6420095 – Wt. 9.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499 6499

20 LITRE PAIL 6420021 – Wt. 50.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) PREMIUM CITRUS POWERWASH – 4 LITRE JUG

• Our Powerwash Detergent, fortified with a noncorrosive, citrus solvent, water based degreaser • Removes oil and grease from the toughest jobs • Safe on painted surfaces 6420003 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

C) INDUSTRIAL DEGREASER

• 100% water soluble, non-flammable industrial strength degreaser requires no solvent and contains corrosion inhibitors • Rinses clean and leaves no film or offensive odour • Applications include: steam cleaners, cleaning off-road equipment, and other jobs with hard to remove grease and dirt

C SORRY, CHEMICALS CANNOT BE SHIPPED

4 LITRE JUG 6420002 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 LITRE PAIL 8000924 – Wt. 49.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499 6499

PUMP ACCESSORIES Bertolini

I D

D) EASY START VALVE

• Relieves pump head pressure during motor start, seals when full system flow is reached • Plumb between pump and internal bypass valve • 3/8" NPT • Max. pressure: 3,200 PSI • Max. flow: 7.8 GPM 99 8017433 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

E) 3/8" THERMAL RELIEF VALVE

• Opens at 62°C (145°F) • Protects your pump and seals 8017424 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

F) DOWNSTREAM CHEMICAL INJECTORS

• Requires pressure drop to activate using dual lance wand, adjustable nozzle holder, or flood nozzle • Size according to machine flow • Rated to 3,200 PSI • 3/8" NPT

108

Wt. 0.3 lbs. 8016513 – 1.8 MM ORIFICE; 2-3 GPM 8016540 – 2.0 MM ORIFICE; 3-5 GPM 8016559 – 2.2 MM ORIFICE; 4-6 GPM

2499/ea.

G) 1,500 PSI COMPACT UNLOADER VALVE

• Includes thermal relief valve, easy start valve • 3/8" FNPT inlet/outlet, 1/4" FNPT bypass port • 8 GPM max. flow • 90°C (195°F) max. temperature 1,500 PSI MAX. PRESSURE

8017406 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,900 PSI MAX. PRESSURE

For single gun systems.

6999

For single or multiple gun systems. 8017415 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8999

H) UNLOADER/INJECTOR VALVE

• Bolt on OEM replacement for most Bertolini washer pumps • Adjustable; not factory preset • Inlet: 1/2" NPT male, outlet: M22X1.5 MAX. 2,000 PSI 5790009 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . MAX. 3,000 PSI 5790010 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . I) SOAP INJECTOR

For above valves 5790009 and 5790010. 8003965 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999 8499 2699

HOSE ADAPTERS and CONNECTORS

A) GARDEN HOSE ADAPTER

Garden hose x 1/2" NPT. 8051207 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

B) QUICK CHANGE NIPPLE

3,000 PSI max. Wt. 0.2 lbs.

8032434 – 1/4" NPT 8032443 – 3/8" NPT . . . . . . . . . . . . . . . . . . . . . . .

499/ea.

C) QUICK CHANGE HOSE CONNECTOR

• 3,600 PSI max. • M22 x 1.5 thread Wt. 0.2 lbs.

5710118 – 1/4" NPT female inlet 5710122 – 3/8" NPT female inlet . . . . . . . . . . .

799/ea.

E) 360° HOSE REEL SWIVEL FITTING

D) BRASS SWIVEL FITTING

3,000 PSI max. 8032470 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3,000 PSI max. 8032461 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4499

FILTERS and STRAINERS

F) & G) HIGH PRESSURE INLINE FILTERS

• 5,000 PSI max. • 100 mesh filter • Recommended for all high pressure nozzles, especially 0° rotating nozzles

F) 1/4" FEMALE TO 1/4" MALE 8018012 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) 1/4" QUICK COUPLER TO 1/4" MALE 8018021 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) INLET WATER STRAINER

12 1499

1/2" NPT fittings, 75 mesh strainer. 8016504 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

I) INLET WATER STRAINER

3/4" NPT fittings, 50 mesh strainer. 8016498 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

R E S S U R E

2999

3 NOZZLE WATER BROOM

• Max Flow: 4 GPM • Max Pressure: 4,000 PSI • Max Temperature: 82.2°C (180°F) • Broom width: 12" 8006841 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4299

18 FT. TELESCOPING PRESSURE WASHER WAND

• Length: 6 ft. 6" when collapsed, 18 ft. extended • Max flow: 8 GPM • Max pressure: 4,000 PSI • Max temp: 93.3°C (200°F) 99 8006835 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . .

149

16" SURFACE CLEANER

• Max flow: 8 GPM • Max pressure: 4,000 PSI • Max temperature: 82.2°C (180°F) 8009508 – Wt. 26.5 lbs. . . . . . . . . . . . . . . . . . .

A S H E R S

32999

GAUGE with QUICK COUPLER • 3/8" QCF x 3/8" QCM connections • Quick connect 2-1/2" gauge 0-5,000 PSI for mounting in-line of high pressure hose, for quick assessment of pressure output for various pressure 99 8006843 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

109

TUNDRA PVC AIR HOSE

I R

• Engineered to be tough and flexible at very low temperatures. • Abrasion and oil resistant, non-marking • Temperature range: -40ºF (-40ºC) 150ºF (65ºC) • All hoses have 1/4” NPT threaded male fittings

2 PC SWIVEL HOSE BARB FITTINGS

1/4" x 25 ft. 8002924 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

Barbed end swivels 360°. 1/4" MALE NPT x 1/4"

8003346 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" MALE NPT x 3/8" 8003407 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799 799

SPRING BALANCER

1999 2999 2299 3/8" x 50 ft. 99 8002937 – Wt. 5.2 lbs.. . . . . . . . . . . . . . . . . . . . . . . . . 34 3/8" x 100 ft. 99 8002938 – Wt. 10.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . 69 1/4" x 50 ft. 8002934 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" x 25 ft. 8002936 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

10 GALLON PRESSURE SANDBLASTER

• Support air tools reducing operator fatigue • 3.3 to 6.6 lbs. capacity • 3 ft. working cable length • Air tool not included 8003888 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

PROFESSIONAL AIR GREASE GUN • Pressurized design gives 30% more blasting power than siphon blasters • 65-125 PSI operating pressure • Includes deadman style sandblasting gun, 8 ft. heavy duty hose (3/8" I.D.) and 4 interchangeable nozzles 99 8003841 – Wt. 47.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

249

DOOR INSTALLATION KIT

110

• Durable air motor construction for extended life and quieter operation • Self priming and fully automatic – cycles continuously while trigger is pulled • 40:1 compression ratio • 40 to 150 PSI operating pressure • Develops 6,000 PSI max. • Includes high pressure flexible hose • 3 way load – bulk, cartridge or dispenser 99 8001915 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

• Includes one 1" and one 2-1/8" bi-metal hole saw, 3/8" mandrel and adaptor • Suitable for wood and metal doors 99 8005857 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

AIR COMPRESSORS

I R

5 HP LIGHT INDUSTRIAL AIR COMPRESSOR

BUILT BY PRINCESS AUTO

LIGHT INDUSTRIAL HIGH VOLUME

SINGLE STAGE CAST IRON PUMP

• 18.5 CFM @ 100 PSI • Max. 140 PSI • 60 gal. tank • 22 amp, 208/230 volt motor • 3-cylinder cast iron pump • No magnetic motor starter required • Thermal overload protection • Easy to read oil level indicator • Large cooling fan plus finned intercoolers for cooler running • Each cylinder has its own filter • Heavy duty metal belt guard 0410065 – Wt. 300.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

95999

7-1/2 HP LIGHT INDUSTRIAL AIR COMPRESSOR

BUILT BY PRINCESS AUTO

SINGLE STAGE CAST IRON PUMP

• 26 CFM @ 100 PSI • Max. 140 PSI • 80 gal. tank • 29 amp single phase, 230 volt electric motor • 3-cylinder cast iron pump • Precision balanced fan type flywheel for cooler running • Recovery time: 58 secs. @ 115 - 140 PSI • Pump up time: 4.1 mins. 0 - 140 PSI • Each cylinder has its own filter • Heavy duty metal belt guard • Magnetic motor starter required (see pg. 117 for complete listing) 99 0410132 – Wt. 482.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1699

111

A I R

5 HP INDUSTRIAL 2-STAGE AIR COMPRESSORS • 5 HP, 230 volt, 22 amp, single phase motor • 18 CFM @ 100 PSI, 16.9 CFM @ 175 PSI • Recovery time: 0 PSI to 175 PSI in 8.5 mins., 135 PSI to 175 PSI in 1.5 mins. • Cast iron, industrial, 2-stage pump • Hardened steel disc valves • Oversized taper roller bearings BUILT BY • Centrifugal unloader for loadless start PRINCESS AUTO • Unique metal belt guard reduces operating temperature by up to 15.6°C (60°F) • Magnetic motor starter required (see pg. 117 for complete listing) For special order compressors see your nearest Princess Auto location or call: 1-800-665-8685 for details.

80 GAL. HORIZONTAL TANK

O’all dim.: 64" x 21" x 47". 0412197 – Wt. 556.0 lbs. . . . . . . . . . . . . . . . SPECIAL ORDER! 575V HORIZONTAL TANK

80 GAL. VERTICAL TANK

1699

169999 208/230/460V HORIZONTAL TANK 99 0410151 – Wt. 610.0 lbs. . . . . . . . . . . . . . . . 1699 0410148 – Wt. 610.0 lbs. . . . . . . . . . . . . . . .

O’all dim.: 32" x 24" x 72". 0412189 – Wt. 554.0 lbs. . . . . . . . . . . . . . . .

169999

SPECIAL ORDER! 575V VERTICAL TANK 0410147 – Wt. 610.0 lbs. . . . . . . . . . . . . . . . 208/230/460V VERTICAL TANK 0410150 – Wt. 610.0 lbs. . . . . . . . . . . . . . . .

169999 169999

10 HP INDUSTRIAL 2-STAGE COMPRESSORS • 35 CFM @ 100 PSI, 31 CFM @ 175 PSI • 10 HP, 208/230/460V, 3-phase motor • Recovery time: 0 PSI to 175 PSI in 5.5 mins. 135 PSI to 175 PSI in 1.1 mins. • 120 gal. horizontal tank • Magnetic motor starter required (see pg. 117 for complete listing) 99 0412999 – Wt. 935.0 lbs. . . . . . . . . . .

2599

3-PHASE 575 VOLT

Same specifications as #0412999. 0410064 – Wt. 935.0 lbs. . . . . . . . . . .

259999

SINGLE PHASE 230 VOLT

112

Same specifications as #0412999. 8022481 – 888.0 lbs. . . . . . . . . . . . . .

299999

11 HP 2-STAGE TRUCK MOUNT COMPRESSOR

A I R

BUILT BY PRINCESS AUTO

• 18 CFM @ 100 PSI; 16 CFM @ 175 PSI • 175 PSI max. • 30 gal. horizontal tank • 11 HP Honda gas engine with electric start and oil alert • Continuous run unloader • Engine idles down when tank is full • Cast iron 2-stage pump with centrifugal unloader for loadless starting • Unique metal belt guard reduces operating temp. • Recovery time: 0 to 175 PSI in 2.4 mins., 135 to 175 PSI in 28 seconds. 0410030 – Wt. 440.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

249999

10 GALLON TWIN TANK COMPRESSORS

A) 9 HP HONDA ENGINE with OIL ALERT

B) 5.5 HP HONDA ENGINE with OIL ALERT

• Powder coated twin 5 gal. tanks • Pneumatic tire • 3-cylinder cast iron pump • Continuous run unloader with muffler • 18.5 CFM @ 100 PSI; 16 CFM @ 140 PSI • Engine idles down when tank is full • 140 PSI max. pressure 0410094 – Wt. 235.0 lbs. . . . . . . . . . . . . . .

• Powder coated twin 5 gal. tanks • Pneumatic tire • 2-cylinder cast iron pump • Continuous run unloader with muffler • 13.8 CFM @ 40 PSI; 11.7 CFM @ 90 PSI • Engine idles down when tank is full • 125 PSI max. pressure 0410095 – Wt. 208.0 lbs. . . . . . . . . . . . . . .

179999

114999

113

A I R

COMPRESSORS A B

PROFESSIONAL SERIES

• Suitable for the professional user, the do-it-yourselfer, or farm user • Oil lubricated, belt driven design • Twin cylinder pump with cast iron cylinders and aluminum cooling fins for reduced heat and longer lasting operation • Heavy duty dual capacitor motor, with manual thermal overload protection • 2 year manufacturer's warranty A) 7 HP 60 GALLON

8000209 – Wt. 245.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . C

62999

B) 5 HP 40 GALLON

• Upright portable space-saving design • Comes with dual gauges and regulator • Dual analog gauges for tank and working pressure • Built-in regulator 0410122 – Wt. 175.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

59999

C) 5 HP 20 GALLON

• Comes with dual gauges and regulator • Dual analog gauges for tank and working pressure • Built-in regulator 0410172 – Wt. 148.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

52999

Peak HP A 7 B 5 C 5

CFM @ 40/90 PSI 12.3/10.3 7.1/5.7 7.1/5.7

Tank Cap. (gal.) 60 40 20

Motor (volt) 208/230 120/240 115/230

Max. pressure (PSI) 130 130 125

Wt. (lbs.) 245.0 175.0 148.5

ITEM

PRICE

8000209 0410122 0410172

629.99 599.99 529.99

MAINTENANCE-FREE SERIES

E D

114

Peak CFM @ 40/90 HP PSI D 5 7.7/6 E 6 7.7/6

• Suitable for most consumer/homeowner applications • Maintenance free, no oil required • 115 volt motor operates on standard household current • Automatic thermal overload protection • Built-in regulator, tank, and working pressure gauges • 95 - 125 PSI working pressure • One year manufacturer's warranty

Tank Cap. (gal.) 15 20

Wt. (lbs.) 101.2 132.0

ITEM

PRICE

0410120 8000218

399.99 419.99

PORTABLE COMPRESSORS As always, every compressor is backed by our Royal Service Promise: "No Sale is Final Until You're Satisfied." • Suitable for light duty applications and general household use • Includes regulator and dual gauges • Direct drive pump

I R

OIL LUBRICATED DIRECT DRIVE PUMP:

• Quieter running than oil-free compressors • Max pressure: 115 PSI

A B C D

Peak HP CFM @ 40/90 PSI 2 5.7/4.2 2 5.7/4.2 2 5.7/4.2 1-1/2 3.7/2.4

Type Oil Lube Oil Lube Oil Lube Oil Lube

Tank Capacity (gal.) 8.0 5.0 4.6 2.0

Style Horizontal Pancake Twin Stack Hot Dog

Wt. (lbs.) 61.6 52.8 50.6 37.4

ITEM

PRICE

8005499 8005494 8005497 8005495

229.99 179.99 179.99 129.99

TECH TIP Q. Is it OK to use an extension cord with an air compressor? A. Princess Auto does not recommend using an extension cord with an air compressor. All extension cords can create power loss, which could lead to overheating and burnout of the electrical motor. Always use an air hose instead. Air hose is generally less expensive and will not damage the compressor motor. If the use of an extension cord is unavoidable, make certain that the appropriate gauge of wire is used.

115

A I R

COMPRESSOR COMPONENTS SINGLE STAGE COMPRESSOR PUMPS

A B

C # of Cyl. 1 1 2 2 3

Max. Flywheel Min. HP RPM Dia. Req'd 1,840 9" 1 1,470 10-1/2" 2 1,400 10" 2-5 1,400 10-1/2" 3-4 1,400 12" 3-5

A* B* C** D* E* * Cast iron pump

Performance

Max. PSI 3.5 CFM @ 1,840 RPM @ 90 PSI 115 5.7 CFM @ 1,470 RPM @ 90 PSI 120 13.8 CFM @ 1,150 RPM @ 100 PSI 120 11.7 CFM @ 1,230 RPM @ 90 PSI 150 18.5 CFM @ 1,230 RPM @ 100 PSI 150

Wt. (lbs.) 20.2 41.5 35.8 50.8 71.0

ITEM

PRICE

0410113 0410114 0411256 0410078 0410069

99.99 149.99 299.99 249.99 399.99

** Aluminum pump with cast iron cylinder sleeves

2-STAGE INDUSTRIAL CAST IRON COMPRESSOR PUMPS F) 2 CYLINDER PUMP

• Cast iron head, centrifugal unloader • Sturdy finned cast iron cooler and finned cast iron aftercooler • 17" dia. flywheel • Bore: 4-1/8" on low pressure, 2-1/8" on high • Stroke 3-1/2" on both • 14.8 CFM @ 175 PSI @ 540 RPM with 3 HP motor • 16.9 CFM @ 175 PSI @ 710 RPM with 5 HP motor • 540 RPM min., 800 RPM max. 0410089 – Wt. 214.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59999

G) 4 CYLINDER PUMP

• Tapered roller bearings • Centrifugal unloader for loadless start • Filter/silencer with replaceable element • Rugged ductile counterweight eliminates vibration and noise • High-performance precision-machined pistons with 4 rings per piston • 19" dia. flywheel • 30 CFM @ 175 PSI @ 612 RPM with a 7-1/2 HP motor • 36 CFM @ 175 PSI @ 794 RPM with a 10 HP motor • Bore: 4-1/8" on low pressure, 2-1/8" on high • Stroke: 3-1/2" on both • 550 RPM min, 800 RPM max. 99 0410088 – Wt. 312.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

AIR COMPRESSOR OIL

116

• ISO 68, SAE 25 weight oil • For single or 2-stage compressors • Reduces heat and prevents rust and oxidation • Can not be shipped

1 litre. 8002412 – Wt. 2.1 lbs. . . . . . . . . . . . 4 litre. 8039268 – Wt. 8.1 lbs. . . . . . . . .

399 1499

AIR COMPRESSOR TANKS

I R

B • ASME approved • 20 gallon unit comes with wheel mounts • 60 gallon unit comes with 3 welded legs • All are primed and come with motor and pump mounting plates A) 20 GALLON CAPACITY TANK

• Max. pressure: 125 PSI • Tank size: 14" x 33" • Mounting plate: 7-3/4" x 22-5/8" 0430603 – Wt. 66.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

229

B) 60 GALLON CAPACITY TANK

• Max. pressure: 175 PSI • Tank size: 20" x 48" • Mounting plate: 9-1/2" x 27" 0430629 – Wt. 154.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

37999

MAGNETIC STARTERS and HEATERS Each 5, 7-1/2, & 10 HP air compressor motor HP/Phase/Voltage combination requires a different type of magnetic starter and different types of heaters. This chart is a breakdown of which heaters/magnetic starters go with each particular HP/Phase/Voltage combination.

HP Phase

Volts

Amps

Heater Amp Heater Heater Starter Part # Starter Compressor Item # Rating Part # Item # Item # 5 1 230 22.0 19.6 E61 0410176 16CF35BG4 0410173 0412189/0412197 5 3 575 5.1 5.3 E44 0410179 16CF35BE4 0410175 0410147/0140148 5 3 208/230 14.8-14.0 15.1 E57 0410177 16CF35BG4 0410173 0410150/0410151 7.5 1 230 29.0 27.4 E67 0410127 16CF35BG4 0410173 0410132/8029778 10 1 230 38.0 38.0 E72 8004077 16DF35BG4 8026076 8022481 10 3 208-230 29.1-26.6 27.4 E67 0410127 16CF35BG4 0410173 0412999 10 3 575 10.3 10.3 E53 0410180 16CF35BE4 0410175 0410064 • All magnetic motor starters require 3 heaters • 460V magnetic starters and heaters are available through special order only. Please allow 2-3 weeks for delivery. MAGNETIC STARTERS 0410175 – Wt. 5.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 219.99 HEATERS 0410173 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 219.99 0410176 0410179 8026076* – Wt. 7.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . 249.99 0410177 0410127 * Not available in all stores. 99 /ea. 8004077 0410180 0410181 . . . . . . . . Call 1-800-665-8685 for more details.

AUTOMATIC AIR COMPRESSOR DRAIN • Replaces troublesome old style drains • Drain valve is designed to provide automatic draining of liquid from compressor air systems • Draining takes effect whenever pressure drops below 8 PSI • Recommended for compressors below 15 HP • Fits 1/4" NPT outlet 0433730 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1399

AIR COMPRESSOR GOVERNOR/UNLOADER • For gas engine compressors • Releases unused air for continuous running applications • Idles engine down when tank is full Wt. 1.1 lbs.

0430471 – 5 HP 0430469 – 10 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999/ea.

117

A I R

PRESSURE SWITCHES

Pressure switches have CEMA 1 enclosures. 1/4" female NPT ports. Pressure Range A 40-150 PSI

Factory Setting 80 Cut-in 110 Cut-out

Special Features

B 25-100 PSI

80 Cut-in 100 Cut-out

Auto/Off switch Unloader valve

C 40-250 PSI

120 Cut-in 150 Cut-out

D 40-250 PSI

115 Cut-in 150 Cut-out

Unloader valve

D 40-250 PSI

115 Cut-in 140 Cut-out

Unloader valve

Auto/Off switch

Ratings

Wt. (lbs.) 1-1/2 HP @ 115V, single phase 0.8 2 HP @ 230V, single phase 3 HP @ 230V, 3 phase 1-1/2 HP @ 115V, single phase 0.9 2 HP @ 230V, single phase 3 HP @ 230V, 3 phase 2 HP @ 115V, single phase 1.6 3 HP @ 230V, single phase 5 HP @ 230V, 3 phase 2 HP @ 115V, single phase 1.8 3 HP @ 230V, single phase 5 HP @ 230V, 3 phase 5 HP @ 230V, single phase 1.8

ITEM

PRICE

0430306

29.99

0430002

37.99

0430256

69.99

0430264

79.99

8004410

84.99

COMPRESSOR ACCESSORIES

E) RELIEF VALVE

• Pressure setting: 100 PSI • 1/4" NPT male 0430967 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

F) AIR VALVE – 2 PACK

• Excellent for admitting air into air tanks and pumps used on pneumatic water systems • 1/8" NPT connection 99 8000912 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . /pkg.

VACUUM GAUGE • 2" dial • Dial reads 0 to 30" Hg • 1/4" NPT bottom connection 0430117 – Wt. 0.3 lbs. . . . . . . . . . . . . .

• Registered in all Canadian provinces • Preset, tested, and sealed at factory • Pressure setting: 150 PSI 0430215 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

1699

H) 1/4" BRASS CHECK VALVE

• For air, oil, water, gas, etc. • Positive – non-leaking • 150 PSI max. 8000910 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

I) BRASS SHUT-OFF VALVE

1/4" NPT female x 1/4" NPT male. 0430041 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

799

J) 1/4" BRASS DRAIN COCK

For compressor tanks. 8002040 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

AIR PRESSURE GAUGES • Metal back • 2" dia. Wt. 0.2 lbs.

COPPER TUBING

118

G) POP SAFETY VALVE

Size Wt. (lbs.) ITEM PRICE 1/4" O.D. 0.1 0400309 0.79/ft. 3/8" O.D. 0.4 0400317 1.19/ft. 1/2" O.D. 0.2 0400325 1.59/ft.

K K L L L L L

Reading 0-160 PSI, 0-11 kg/cm2 0-200 PSI, 0-14 kg/cm2 0-100 PSI, 0-7 kg/cm2 0-160 PSI, 0-11 kg/cm2 0-200 PSI, 0-14 kg/cm2 0-300 PSI, 0-21 kg/cm2 0-160 PSI, 0-11 kg/cm2*

Thread Size 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/8" NPT

L K ITEM PRICE 0430386 6.99 0430387 6.99 0430384 6.99 0430385 6.99 0430393 6.99 0430388 6.99 8058978 6.99

TECH TIPS Don't forget to use Teflon Tape to seal all connections between accessories and your air hose.

BRASS FITTINGS COMPRESSION FITTINGS Includes: fitting, nut and compression sleeve Tube Size Pipe Size Wt. (lbs.) ITEM 1/4" O.D. 1/8" NPT 0.1 0400002 1/4" O.D. 1/4" NPT 0.1 0400044 3/8" O.D. 3/8" NPT 0.1 0400069 1/2" O.D. 3/8" NPT 0.1 0400077 1/2" O.D. 1/2" NPT 0.1 0400001

FEMALE ELBOWS Size 1/4" NPT 3/8" NPT

Pkg. of 4. Size Wt. (lbs.) 1/4" O.D. 0.1 3/8" O.D. 0.1 1/2" O.D. 0.1

ITEM PRICE 0400143 2.99/ea. 0400150 3.29/ea.

ITEM 0400200 0400218 0400226 0400234

PRICE 0.69/ea. 0.99/ea. 1.49/ea. 1.49/ea.

PIPE COUPLINGS

Wt. 0.1 lbs.

ITEM 0400259 0400267 0400275

Size (NPT) 1/4"M x 1/8"F 3/8"M x 1/4"F 1/2"M x 1/4"F 1/2"M x 3/8"F

PRICE 0.69/ea. 0.79/ea. 1.29/ea.

ITEM PRICE 0400010 1.09/pkg. 0400036 1.19/pkg. 0400012 1.79/pkg.

FEMALE TEES

Wt. 0.1 lbs.

PIPE PLUGS Size 1/8" 1/4" 3/8"

PRICE 0.99/ea. 1.19/ea. 1.89/ea. 2.19/ea. 2.79/ea.

BUSHINGS

Wt. 0.1 lbs.

I R

REPLACEMENT COMPRESSION SLEEVES

Wt. 0.1 lbs.

Size 1/4" NPT 3/8" NPT

ITEM 0400168 0400176

PRICE 3.09/ea. 4.79/ea.

CLOSE NIPPLE

Wt. 0.1 lbs.

Size 1/4" NPT 3/8" NPT

ITEM 0400184 0400192

PRICE 1.99/ea. 2.09/ea.

3/8" NPT. Wt. 0.1 lbs.

0400242 . . . . . . . . . . . . .

99¢/ea.

HOSE MENDERS

ADAPTERS

Wt. 0.1 lbs.

• 1/4" male x 3/8" female NPT • Pkg. of 2 0439927 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

299/pkg.

INDIVIDUAL ADAPTERS Wt. 0.1 lbs.

Size (NPT) 1/8" M x 1/4" F 1/4" M x 3/8" F 3/8" M x 1/2" F

PRICE 1.99/ea. 2.49/ea. 2.49/ea.

PRICE 2.59 2.59 3.29

• 1/4" x 1/4" male NPT • Pkg. of 2 8002513 – Wt. 0.1 lbs. . . . . . .

199

B) FEMALE

• 1/4" x 1/4" female NPT • Pkg. of 2 8002514 – Wt. 0.1 lbs. . . . . . .

249

SWIVEL ADAPTER • Swivels to prevent kinks in air hose • 1/4" NPT connections • 150 PSI max. • Steel construction 0434019 – Wt. 0.2 lbs. . . . . . . . . . . .

Wt. 0.1 lbs.

Hose 1/4" I.D. 3/8" I.D.

Female End Size 1/4" NPT 1/4" NPT

ITEM 0431676 0431684

PRICE 2.59/pr. 2.79/pr.

MALE HOSE BARBS

A) MALE

ITEM 0431692 0431700 0430237

FEMALE HOSE BARBS ITEM 0430010 0430037 0430008

CONNECTORS A

Hose 1/4" x 1/4" I.D. 3/8" x 3/8" I.D. 1/2" x 1/2" I.D.

Wt. 0.1 lbs.

Hose 1/4" I.D. 3/8" I.D. 3/8" I.D. 1/2" I.D.

Male End Size 1/4" NPT 1/4" NPT 3/8" NPT 3/8" NPT

ITEM 0431635 0431643 0431650 0431668

PRICE 1.79/pr. 1.99/pr. 2.29/pr. 2.39/pr.

TECH TIPS Why use air tools over power tools?

Air tools generally cost less, weigh less, and will not be damaged if stalled or overloaded. With air tools, you also eliminate the risk of shock or fire.

119

A I R

D C E

A STYLE

Interchanges with ARO style couplers. Port Gender Type ITEM A 1/4" NPT Female body 0431957 B 1/4" NPT Female plug 0430258 C 1/4" NPT Male body 0430221 D 1/4" NPT Male plug 0430257 E) 1/4" NPT female body and male plug. 0430375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PRICE 9.99/ea. 3.99/pr. 9.99/ea. 3.99/pr.

1199/set

5 PC “A” STYLE

Includes: one 1/4" NPT female body, three male, and one female 1/4" NPT plugs. 99 0430139 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . /set

G STYLE

1/2" True-flate style coupler. Port Gender Type K 1/2" NPT Female body L 1/2" NPT Female plug M 1/2" NPT Male body N 1/2" NPT Male plug

H STYLE

• Where more air volume is needed • Industrial interchange coupler Port

ITEM 0433169 0433193 0433177 0433185

PRICE 18.99/ea. 4.99/ea. 18.99/ea. 4.99/ea.

Gender Type ITEM PRICE body 0432765 15.99/ea. plug 0430269 6.49/pr. plug 0430268 6.49/pr.

O 3/8" NPT Female P 1/4" NPT Male P 3/8" NPT Male

V W

U L STYLE

Lincoln style coupler. Port U 1/4" NPT V 1/4" NPT W 1/4" NPT

Gender Female Female Male

Type ITEM PRICE body 0431783 13.99/ea. plug 0430262 5.49 /pr. plug 0430261 5.49 /pr.

3 WAY COUPLER • Accepts the 3 most popular 1/4" NPT style plugs A, M, and T • 1/4" NPT female body 0430219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

120

AIR QUICK COUPLERS

C H

I J

M STYLE F F G G H I I

Port 1/4" NPT 3/8" NPT 1/4" NPT 3/8" NPT 1/4" NPT 1/4" NPT 3/8" NPT

Gender Female Female Female Female Male Male Male

Type body body plug plug body plug plug

ITEM 0431742 8039188 0430255 8039222 0432708 0430254 8039231

PRICE 7.99 /ea. 8.99 /ea. 3.49/pr. 4.99/pr. 7.99 /ea. 3.49/pr. 4.99/pr.

J) 1/4" NPT female body and male plug.

0430140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99/set

5 PC “M” STYLE

Includes: one 1/4" NPT female body, three male, and one female 1/4" NPT plugs. 99 /set 0430137 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . .

7 PC “M” STYLE

Includes: one 1/4" NPT female body, three male, and three female 1/4" NPT plugs. 99 0430138 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . /set

P STYLE

True-Flate style for higher air flow. Port Gender Type ITEM Q 1/4" NPT Female body 0432724 Q 3/8" NPT Female body 0431817 R 1/4" NPT Female plug 0430267 R 3/8" NPT Female plug 0430265 S 1/4" NPT Male plug 0430266 S 3/8" NPT Male plug 0430263 T 3/8" NPT Male body 0432732

X T STYLE

PRICE 14.99/ea. 14.99/ea. 6.49/pr. 6.49/pr. 5.99/pr. 5.99/pr. 14.99/ea.

Z Interchanges with True-Flate, Parker Hannifin style couplers. Port

1199/ea.

X 1/4" NPT Y 1/4" NPT Z 1/4" NPT

Gender Type ITEM PRICE Female body 0433144 8.49/ea. Female plug 0430260 3.49/pr. Male plug 0430259 3.49/pr.

1-INTO-3 QUICK COUPLER Perfect for use with our quick coupler tips on page 120. • 3 M-style quick coupler outlets • 1/4" NPT female inlet 0434191 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I R

1599

UNIVERSAL QUICK COUPLER • Fits “A”, “T”, “L”, and “M” style coupler plugs • Coupler has 1/4" NPT female port 0434779 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

“M” STYLE QUICK COUPLER SETS 5 PC QUICK COUPLER SET

Includes: 1/4" NPT female coupler body, three 1/4" NPT male plugs, 1/4" NPT female plug. 99 8002436 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 PC QUICK COUPLER SET

Includes: 1/4" NPT male x male connector; 1/4" NPT female body; 1/4" NPT male plug; 1/4" NPT female plug. 99 8057327 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 PACK COUPLER PLUGS

1/4" NPT thread. Wt. 0.1 lbs.

8057522 – Male thread 8036831 – Female thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299/pkg.

1-INTO-3 BRASS AIR MANIFOLD • No need to connect and disconnect every time you want to change tools • Supply 3 air tools from 1 outlet • 1 inlet with three 1/4" NPT female outlets 0430465 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

AIR MANIFOLDS A All outlet ports are 1/4" NPT. Manifold Working Pressure 2:1 Size Safety Ratio A 1/2" 120 PSI B 1/2" 120 PSI C 1/2" 120 PSI D 1" 200 PSI

Inlet Port 1/4" NPT 1/4" NPT 1/4" NPT 1/2" NPT

# of Outlet Ports Wt. (lbs.) 2 0.1 3 0.2 4 0.3 4 1.1

D ITEM

PRICE

0430424 0430425 0430426 0430429

3.49 4.29 4.99 16.99

AIR HOSE INDUSTRIAL RUBBER AIR HOSE • Abrasion and kink resistant synthetic rubber construction, with spiral yarn reinforcement • Operating temperature: -40°C to +88°C (-40°F to +190°F) • Remains flexible at low temperature • 300 PSI working pressure (4:1 safety ratio) Length 25 ft. 50 ft. 25 ft. 50 ft. 100 ft. 25 ft. 50 ft.

Hose Size 1/4" I.D. 1/4" I.D. 3/8" I.D. 3/8" I.D. 3/8" I.D. 1/2"I.D. 1/2"I.D.

Male Fittings 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/2" NPT 1/2" NPT

Wt. (lbs.) 2.9 4.9 4.5 9.1 18.3 5.9 12.1

ITEM 8003885 8003894 8003910 8003929 8003938 8039552 8039543

PRICE 21.99 39.99 24.99 44.99 84.99 39.99 74.99

121

A I R

INDUSTRIAL PVC AIR HOSE • Lighter than rubber • Silicone free, oil resistant • Max. 300 PSI (4:1 safety ratio) • Non-marking • Built in accordance to ISO 9001 standards Length Hose Size Male Fittings Wt. (lbs.) 15 ft. 1/4" I.D. 1/4" NPT 1.1 25 ft. 1/4" I.D. 1/4" NPT 1.8 35 ft. 1/4" I.D. 1/4" NPT 2.5 50 ft. 1/4" I.D. 1/4" NPT 3.5 60 ft. 1/4" I.D. 1/4" NPT 5.3 75 ft. 1/4" I.D. 1/4" NPT 5.3 15 ft. 3/8" I.D. 1/4" NPT 1.5 25 ft. 3/8" I.D. 1/4" NPT 2.7 35 ft. 3/8" I.D. 1/4" NPT 3.7 50 ft. 3/8" I.D. 1/4" NPT 5.1 60 ft. 3/8" I.D. 1/4" NPT 5.8 75 ft. 3/8" I.D. 1/4" NPT 7.5 100 ft. 3/8" I.D. 1/4" NPT 9.6 25 ft. 3/8" I.D. 3/8" NPT 2.3 50 ft. 3/8" I.D. 3/8" NPT 4.6 25 ft. 1/2" I.D. 1/2" NPT 3.6 50 ft. 1/2" I.D. 1/2" NPT 7.0

ITEM 0430450 0430204 0430451 0430208 0430455 0430371 0430452 0430058 0430453 0430066 0430456 0430373 8004456 0430210 0430209 0430212 0430213

PRICE 9.99 13.99 15.99 19.99 24.99 32.99 11.99 14.99 18.99 22.99 27.99 35.99 45.99 15.99 23.99 25.99 37.99

COILED NYLON AIR-HOSE

ITEM 0430275 0430276 0430277 0430281

• 300 PSI max. • Ideal when you need a short length of ready made hose • Male fittings 1/4" NPT, on both ends • Built in accordance to ISO 9001 standards Length Hose Wt. (lbs.) 25" 1/4" 0.3 60" 1/4" 0.4 75" 1/4" 0.5 25" 3/8" 0.3 60" 3/8" 0.6 75" 3/8" 0.7

ITEM

PRICE

0430316 0430317 0430318 0430333 0430334 0430335

4.29 5.29 5.79 4.79 6.29 6.79

SWIVEL END WHIP HOSE

• Has spring guards and reusable fittings • Working pressure: 200 PSI max. • Resists oil, grease, corrosion, and abrasion • -40°C to 82°C (-40°F to 180°F) working temp. Length Hose Size Male Fittings Wt. (lbs.) 12-1/2 ft. 1/4" I.D. 1/4" NPT 0.4 25 ft. 1/4" I.D. 1/4" NPT 0.6 50 ft. 1/4" I.D. 1/4" NPT 1.0 25 ft. 3/8" I.D. 1/4" NPT 1.2

INDUSTRIAL PVC WHIP HOSE

PRICE 11.99 16.99 22.99 27.99

POLYURETHANE SELF-COILED AIR HOSE

• 2.5 ft. long • 300 PSI max. • Use between air tool and coupler • Protect coupler from impacts and reduces kinking and twisting of hose • 1 end has 1/4" NPT female fixed connection, other end has 1/4" NPT male swivel connection 99 0430018 – Wt. 0.4 lbs. . . . . . . . . . . .

POLYURETHANE COILED AIR HOSE • Industrial strength with flexibility • Always retains original shape even when over stretched • Kink and oil resistant • Abrasion-resistant and non-marking • Max. working pressure: 125 PSI • -40°C to 82°C (-40°F to 180°F) working temp. • Hose has 4" pigtail and 20" whip end • Built in accordance to ISO 9001 standards

122

Length 15 ft. 25 ft. 25 ft.

Hose Size Male Fittings Wt. (lbs.) ITEM PRICE 1/4" I.D. 1/4" NPT 0.6 0430156 17.99 1/4" I.D. 1/4" NPT 0.9 0430158 25.99 3/8" I.D. 1/4" NPT 2.1 0430160 39.99

• Softer and more pliable than nylon • Superior retention quality and will not lose its “recoilability” • Stays soft and won't kink • Length: 25 ft. • Hose diameter: 1/4" • Fittings: 1/4" NPT 99 0431205 – Wt. 1.0 lbs. . . . . . . . .

AIR HOSE REELS

INDUSTRIAL RETRACTABLE REELS with HOSE

I R

A) 3/8" x 50 FT

• Heavy duty steel construction with corrosion resistant powder coating • Includes 3/8" x 50 ft. rubber hose • Max. pressure: 300 PSI • Solid 1" steel centre support shaft • Solid brass swivel joint • Can be mounted on ceiling, wall, bench, or truck • 4 direction non-snag rollers reduce hose wear 99 0430445 – Wt. 53.0 lbs. . . . .

HAND CRANK REELS

199

B) 3/8" x 25 FT

• Steel construction with corrosion resistant powder coating • Includes: 3/8" x 25 ft. rubber hose • Max. pressure: 300 PSI • Solid 1" steel centre support shaft • Solid brass swivel joint • Can be mounted on ceiling, wall, bench, or truck • 4 direction non-snag rollers reduce hose wear 99 8000520 – Wt. 22.2 lbs. . . . .

139

C) 3/8" x 50 FT

• High impact resistant polypropylene housing • Includes 3/8" x 50 ft. PVC hose • Includes 3 ft. hose lead • Max. pressure: 300 PSI • 3/8" NPT inlet • Positive latching mechanism • Can be mounted on ceiling, wall, bench, or truck 99 8001538 – Wt. 23.6 lbs. . . . . .

179

E D) MAX. PRESSURE: 175 PSI

• Holds 100 ft. of 3/8" I.D. or 50 ft. of 1/2" I.D. hose • 1/4" NPT brass swivel inlet • Durable steel construction 8000539 – Wt. 9.0 lbs. . . . . . . . . .

2999

E) MAX. PRESSURE: 300 PSI

• Spring tension brake • 1/4" NPT brass swivel inlet • Durable steel construction with corrosion resistant powder coating HOLDS 50 FT of 3/8" I.D. HOSE

8002145 – Wt. 8.9 lbs. . . . . . . . . . HOLDS 100 FT of 3/8" I.D. HOSE 0430377 – Wt. 10.9 lbs. . . . . . . .

5999 6999

BLOW GUNS 4 PC AIR DUSTER KIT

• Handle with quick change 4-1/4" and 11" long extension tube and brass nozzle • 1/4" NPT inlet 99 0430370 – Wt. 0.5 lbs. .

RUBBER NOZZLE BLOW GUN

WONDER GUN

• For positive leakproof connection when blowing out any fluid lines, automatic transmissions, etc. • A must where metal tip could mark delicate finish on moulds or fresh paint 99 0432591 – Wt. 0.6 lbs. . . . . . . .

• Attaches to a compressor and can be assembled to operate as a blow gun or a vacuum cleaner with a 4 ft. air hose and dust collecting bag • Ideal for blowing or sucking up dust, wood, and metal bits left around the working area 99 3406089 – Wt. 1.6 lbs. . . . . . . . .

REPLACEMENT TIP 0432609 – Wt. 0.1 lbs. . . . . . . . . .

4.99

Shop Online: www.princessauto.com

123

A I R

BLOW GUNS All blow guns on this page have 1/4" NPT inlet port.

A A) LONG BLOW GUN

• 2 ft. extension • 1 safety and 1 rubber tip nozzle 0432351 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

A) EXTRA LONG BLOW GUN

• 4 ft. extension. • 1 safety and 1 rubber tip nozzle 0432369 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1699

B) TELESCOPING BLOW GUN

• Pistol type body • Extension tube has a max. length of 13" 0430441 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1099

C) TELESCOPING BLOW GUN

Three section tube extends to 12-3/4". 0430391 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

D) BLOW GUN with ROTATING NOZZLE

Nozzle rotates 360°. 0430444 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899

E) PLASTIC BLOW GUN

With 12" metal nozzle. 0430014 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

F) PLASTIC BLOW GUN

With 4-1/2" metal nozzle. 8045894 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

G) HIGH VOLUME BLOW GUN

• Zinc alloy housing • Brass tube and nozzle 0430214 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

H) SAFETY LEVER BLOW GUN

Complete with extra nozzle. 0432518 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G F

399

I) AIR DUSTER

• High volume air duster has over triple the air volume of regular blow guns • All metal construction 99 0430023 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

J) CLEANING/BLOW GUN

• Useful for spraying, degreasing, rust proofing, etc. • With aluminum nozzle • 8 ft. vinyl syphon hose 0430216 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

TIRE INFLATORS K) INFLATOR GAUGE

• Automatic gauge displays pressure of tire as air is added • Easy to read, magnified gauge • Calibrated: 10 to 120 lbs. • Zinc die-cast construction with 15" air hose 99 0432245 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

L) PISTOL GRIP AIR INFLATOR

• Gauge reads 0 to 220 PSI, 0 to 15 bar and 0 to 1,500 kPa • Chuck clip 0433797 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1799

M) INFLATOR with GAUGE

• 2-1/4" gauge reads 0-140 PSI, 0-10 bar • Chuck clip 0430133 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3499

N) PISTOL GRIP INFLATOR

124

• 2-1/4" gauge reads 0-140 PSI, 0-10 bar • Chuck clip 0430135 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

AIR CHUCKS Chucks have 1/4" NPT threads. A) LOCK ON LEVERED TIRE CHUCK

120 PSI max. 0434365 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

549

B) CHUCK with FEMALE END

Brass and white metal construction 0430165 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

I R

DUAL HEAD AIR CHUCKS C) 1/4" FEMALE NPT

0432625 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199 499

D) 1/4" FEMALE NPT 8037714 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

PORTABLE AIR TANKS • Tanks include gauge, hose, and tire chuck • 125 PSI max. Cap. (US) Size Wt. (lbs.) 5 Gal. 10-1/4"W x 14-5/8"L x 13"H 16.4 7 Gal. 10-1/2"W x 22"L x 13"H 19.1 11 Gal. 12-1/4"W x 25"L x 14-3/4"H 30.2

ITEM 0430420 0430490 0430473

PRICE 39.99 44.99 56.99

AIR ACCESSORY KIT 17 PC KIT

Includes: 2 M-style female coupler bodies, 2 male plugs, 2 female plugs, blow gun with safety nozzle, brass wire brush, tapered inflator nozzle, 2 inflator needles, dual tire chuck, 120 PSI tire gauge, 1/4" NPT female x female connector, and two 1/4" NPT male x male connectors. 99 /set 0430007 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AIR FILTRATION DESICCANT AIR DRYER • Delivers extremely dry air needed for painting or sandblasting applications • Uses desiccant silica pellets (sold separately) to remove water and water vapour from the air flow • 1-17 CFM max. flow, 175 PSI max. pressure • 1/2" NPT ports • O’all length: 37" • NOT DESIGNED FOR USE WITH BREATHING AIR

8055757 – Wt. 16.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

AIR DRYER PELLETS

For use in air dryers. 0470011 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

3199

TECH TIP Air being discharged from an air compressor can reach very high temperatures and can melt the drying pellets inside an air dryer. It is recommended that you mount your air dryer as far away from your compressor as possible to allow the discharged air to cool to at least 38°C (100°F). Air dryer pellets break down over time and can contaminate your lines and air tools. To prevent contamination it is recommended you mount an air filter downstream from the dryer.

125

A I R

1/2" INDUSTRIAL AIR FILTER, REGULATOR and LUBRICATOR

ARO

• Higher capacity for larger compressors • Air flow 100 CFM @ 100 PSI • Aluminum construction reduces weight B C A • 1/2" NPT ports HIGH PERFORMANCE – INDUSTRIAL QUALITY • Compact size allows greater design flexibility Ideal for 2-stage applications! • Regulator includes gauge Type CFM Max. Pressure Operating Wt. ITEM PRICE Rating Inlet Range Temperature (lbs.) 100 175 PSI – -18° to 79°C (0°F to 175°F) 2.2 0470040 69.99 A Filter 130 200 PSI 10 - 200 -18° to 82°C (0°F to 180°F) 1.9 0470041 69.99 B Regulator 100 175 PSI – -18° to 79°C (0°F to 175°F) 2.1 0470042 74.99 C Lubricator

AIR PRESSURE REGULATORS D E

• Operates from 0 to 130 PSI • Reads 0 to 230 PSI • 60 CFM @ 100 PSI • 1/4" NPT ports D) DIAL READ REGULATOR

Ideal for use with paint guns. 0470010 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999 E) REGULATOR with GAUGE 99 0470006 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 F) REGULATOR with GAUGE and SHUT OFF VALVE 99 0450022 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

POWERFIST AIR FILTRATION AIR FILTERS, REGULATORS and LUBRICATORS

• 150 PSI max. working pressure • 5°C to 60°C (41°F to 140°F) operating temperature • Filters have 20 micron filtration • Acetate filter and lubricator bowls, 4 oz. capacity • Regulators are diaphragm type and come with gauge G G G H H H I

Type Filter* Filter* Filter* Regulator Regulator Regulator Lubricator

Port Size Flow Rating 1/4" NPT 60 CFM 3/8" NPT 70 CFM 1/2" NPT 100 CFM 1/4" NPT 60 CFM 3/8" NPT 70 CFM 1/2" NPT 100 CFM 3/8" NPT 65 CFM

Pressure Wt. (lbs.) 0 - 120 PSI 1.7 0 - 120 PSI 1.6 0 - 120 PSI 1.6 0 - 120 PSI 2.0 0 - 120 PSI 1.7 0 - 120 PSI 1.9 40 - 120 PSI 1.6

G ITEM 0470018 0470022 0470026 0470019 0470023 0470025 0470024

H PRICE 29.99 29.99 29.99 34.99 34.99 34.99 29.99

* REPLACEMENT FILTER ELEMENT 0470682 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 3.99

1/4" NPT ports. J) OIL and WATER SEPARATOR

• Max. 125 PSI • Attaches in the airline between air supply and tool 0433359 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1099

K) IN-LINE FILTER

• Max.150 PSI • Push button drain • O’all dim.: 3-1/2" x 1-1/2" 0470035 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1399

L) AIR LINE FILTER

• Lightweight, can be installed on air inlet of tools, filters small particles from air supply • O’all dim.: 2-3/16" dia. x 2-3/4" long 99 0470012 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

M) AIR RESTRICTOR VALVE with GAUGE

126

• In-line air restrictor with gauge can be used on most air tools to adjust volume • Gauge reads: 0-160 PSI and 0-11 kg/cm2 0430074 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

PAINTING

I R

PAINT SPRAY GUN • Non-bleeder type gun with siphon feed • 1 quart aluminum paint canister • Standard fluid inlet can be attached to a remote paint supply • 30-70 PSI air pressure • 8.5 to 12.0 CFM air consumption • Nozzle: 1.8 mm 99 0450379 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

REPAIR KIT 0452052 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.99

GASKET KIT 0450013 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.99

HI-VOLUME SPRAY GUN • Includes: spray gun, 2 qt. pressure cup, 6 ft. fluid hose, 5-1/2 ft. air hose, all gauges and fittings • Unit is the ideal production type outfit for refinishing automobiles, buses, tractors, and trailers • 2 quart cup requires less filling • 7-11 CFM @ 0-60 PSI working pressure • Nozzle: 1.0 mm • Ideal air pressure: 5-20 PSI; enamels: 10 PSI; lacquers: 5 PSI 99 0450510 – Wt. 6.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

149

GASKET KIT 0450014 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.99

GRAVITY FEED PAINT GUNS Each ANI gun is factory tested and fine tuned before being packaged. A) LOW PRESSURE SPRAY GUN

• Fixed spray pattern • Constant bleed • Cup: 8 oz. • 10 - 45 PSI working pressure • 2 CFM @ 40 PSI air consumption • Nozzle: 0.7 mm 0450052 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

3499

B) TOUCH UP GUN

• Adjustable spray pattern • Cup: 8 oz. • 20 - 60 PSI working pressure • Air consumption: 7 CFM @ 40 PSI • Nozzle: 0.7 mm 0450054 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

INDUSTRIAL QUALITY!

5999

C) PROFESSIONAL GRAVITY FEED GUN

• Nozzle: 1.5 mm • Cup: 16 oz. • 12 to 15 CFM air consumption • 30 - 60 PSI working pressure 0450024 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

Optional tips available. Call your nearest Princess Auto store or Winnipeg toll free at 1-800-665-8685

PLASTIC PAINT CAN

PLASTIC PAINT STRAINERS

• 1 quart capacity • Lid included 0452151 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

• Fits the suction tube on most paint spray cup guns • Package of 8 0450030 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

299

1199

127

A I R

WHAT IS HVLP? An HVLP (High Volume Low Pressure) spray gun applies a high quality coating to large surfaces within a very short time. They apply the paint more gently than a conventional paint gun allowing you to cut down on material cost, labour and pollution to the environment. HVLP systems are capable of spraying lacquer, stains, sealers, oil-based latex, waterborne finishes and urethanes. What's the difference between HVLP and conventional spray guns? In a conventional paint gun the paint exits the gun at approx. 30-50 PSI. When used properly, an HVLP spray gun applies the paint at no more than 10 PSI. This means that a higher volume of paint is being applied to the surface when using an HVLP gun. Since the paint exiting an HVLP gun is at a much lower pressure than a conventional paint gun, the paint will not carry as far. The painter has to hold the HVLP gun approx. half the distance from the surface (The recommended distance for conventional guns is 8". The distance for HVLP is 2-4"). Spraying closer to the surface means the painter must spray faster to apply an even coat. A painter who is spraying farther from the surface would have to paint slower to apply an even coat of paint.

HVLP PAINT GUNS A) PROFESSIONAL/INDUSTRIAL HVLP PAINT GUN

• Forged aluminum silicon alloy body, sandblasted and nickel-plated • Air cap combination assures perfect atomization of all types of paint • Stainless steel needle and brass 1.7 mm nozzle • Ideal for: general finishing, metallic base coat, pearled base coat, top finishing, enamels, and clear coat • Air valve independent from needle • Viton and Teflon gaskets are solvent and acetone resistant • 3 control knobs for spray pattern, fluid, and air pressure adjustment • 14-17 CFM air consumption • 38 PSI max. inlet pressure 99 0450004 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

154

B) GRAVITY FEED HVLP SPRAY GUN

• Top load • 12 CFM air consumption • 15 to 43 PSI working pressure • With regulator and pressure gauge • 1.4 mm nozzle 0450062 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

14999

C) HVLP PAINT SPRAY GUN with REGULATOR

• Low air pressure at the spray tip – up to 10 PSI • 1 quart cup • Requires 12 CFM for optimum performance • 1.0 mm nozzle 0450047 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

14999

D) PROFESSIONAL HVLP PAINT GUN

• High volume, low pressure produces a soft gentle easy to control spray • Operating pressure: 43 PSI max. • 13 CFM air consumption • Nozzle size: 1.0 mm. • Includes 2 quart pressure tank, pressure gauge and 5 ft. hoses 99 0450071 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

179

TECH TIP

SPRAY GUN CLEANING KIT

Having an in-line filter may not be enough for paint guns, sandblasters, and tools that require perfectly dry air.

128

In-line filters are made for eliminating water droplets only; water vapours pass right through. To achieve optimum moisture elimination, you may need to use an air dryer.

• Ideal for cleaning all types of spray guns • Includes a specially formulated lubricant for spray gun needles 99 0450001 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PAINT GUNS

I R

A) TOUCH-UP GUN

• Ideal for touch-up spraying, edging and shading • Can also be used for precision detail spraying • Cup holds 1/4 litre of paint • 1.8 mm nozzle • 3 CFM air consumption • 30 to 50 PSI air pressure 0450387 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999

REPAIR KIT 0452060 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.49

B) SPRAY GUN

• Can be used with bulk tank • Nozzle size: 2.0 mm dia. • 22 - 44 PSI operating pressure • 7" - 9" pattern width • 6 - 8.8 CFM air consumption • 1/4" NPT air inlet 8005516 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

C) MINI SPRAY GUN

• Nozzle: 0.5 mm dia. • 30 - 50 PSI operating pressure • 1-1/2" pattern width • 2 CFM air consumption • 0.2 litre paint cup • 1/4" NPT air inlet 0450059 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AIR BRUSHES D) PROFESSIONAL KIT

• Aluminum alloy construction • Max. working pressure: 30 PSI @ 0.5 CFM air consumption • Pencil style design sprays at any angle • Adjustable for either left or right hand operation • Includes 2 paint cups (2 cc, 10 cc), mini spanner, air connector, and wrench 0450067 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5999

E) HOBBY KIT

• Kit includes air brush, air hose, connecting lid, wrench, and 2 glass jars size 22 cc and 60 cc • 15 to 35 PSI working pressure 99 0470526 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-1/2 GAL PAINT TANK

• Max pressure: 80 PSI • Working pressure: 25 - 50 PSI • All metal construction • Lid is held securely with 4 locking wing nuts • Tank will hold a standard 1 gal. or 4 litre paint can or can be bulk filled • Complete with regulator, 15 ft. paint hose, air hose and fittings • O’all dim.: 20-1/2" high x 9-3/4" dia. 99 8006581– Wt. 22.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

159

129

SANDBLASTING

I R

HEAVY DUTY SANDBLASTING CABINET BUILT BY PRINCESS AUTO

• 48" x 24" x 24" working area • Air consumption: 20 CFM @ 77 PSI • 125 PSI max. • Heavy duty Italian-made sandblasting gun for industrial applications • Includes regulator • Front of cabinet opens for easy loading of large parts and abrasives 8001312 – Wt. 216.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

99999

FLOOR MODEL SANDBLASTING CABINET • Blast rust, corrosion, and paint in an enclosed cabinet to keep dust off the floor and out of the air • Heavy steel construction, heavy duty blast gun, tempered glass viewing window • Air consumption: 5 - 15 CFM @ 80 - 120 PSI 8046492 – Wt. 90.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39999

2 PC REPLACEMENT CERAMIC NOZZLES 8026717 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V LIGHT ADAPTER 8012795 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.99 9.99

SANDBLAST CABINET LIGHT

Fits 8046492 and 8014659. 8012802 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99

BENCH MODEL SANDBLASTING CABINET • Cleans parts quickly and easily • Through the sealed rubber glove ports, you control the air blast gun inside • For use with glass beads, silica sand, aluminum oxide, and most other abrasives • Window size: 22" x 11" • Air consumption: 5-15 CFM @ 120 PSI • O’all dim.: 25" x 21" x 19" 99 8014659 – Wt. 40.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

2 PC REPLACEMENT CERAMIC NOZZLES 8026717 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.99

12V LIGHT ADAPTER 8012795 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.99

SANDBLAST CABINET LIGHT

Fits 8046492 and 8014659. 8012802 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99 1/4" REPLACEMENT CERAMIC NOZZLES for CABINET 6320027

6320036 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99/ea.

SANDBLASTING CABINET WINDOW SHIELD • Easy peel and stick design • Can be cut to fit any size 8 PK of 11" x 17" 8055515 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

130

8 PK of 12" x 36" 8006652 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499 3499

100 LB PRESSURE SANDBLASTER • ASME approved and CRN registered • When the shut-off valve on the nozzle is opened, the air/sand mixture comes out under tremendous force • Pressure blasters use 1/3 the sand and considerably less air than a siphon fed sandblaster • Quick-release deadman valve stops immediately if the operator’s grip slips or the unit is dropped • “Lift-up” sand filler valve, air inlet valve, pressure gauge, mixing control, relief valve, fixed reinforced sand/air hose, and 2 ceramic 1/8" nozzles • 8 foot sand/air hose • Solid rubber wheels 99 8003897 – Wt. 55.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I R

499

ACCESSORIES FOR 100 LB PRESSURE SANDBLASTER QUICK-RELEASE DEADMAN VALVE 6320005 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . STEEL PIVOT SEAL BLOCK 6320011 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1999 199 1/2" FORGED BRASS ON/OFF VALVE 99 5715271 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 HEAVY DUTY CERAMIC NOZZLES

Size 3/32" 1/8" 5/32" 1/4"

Wt. (lbs.) 0.3 0.3 0.3 0.3

ITEM 6320246 6320253 6320261 6320543

PRICE 9.99 9.99 9.99 9.99

BUILT BY PRINCESS AUTO NOZZLE SELECTION CHART

Nozzle I.D.

Recommended Blasting Compressor Specs Area HP CFM PSI (sq. ft./min.) 3/32" 2 to 3 10 100 3/4 1/8" 3 to 5 20 100 1-1/2 to 2 5/32" 5 to 10 30 100 2 to 2-1/2 3/16" 10 to 15 45 100 3-1/2 to 4 1/4" 20 80 100 4-1/2 to 5

Abrasive usage/hr. 100 lbs. 175 lbs. 225 lbs. 350 lbs. 500 lbs.

PRESSURE SANDBLASTERS

• Pressurized design gives 30% more sandblasting power than siphon units • Working pressure: 85 - 125 PSI • Air consumption: 6 - 25 CFM A) 10 GALLON MODEL

Complete with a nozzle end shut-off valve, pressure gauge, 4 ceramic nozzles, 9 ft. hose, filling funnel, water trap, and 6" rubber wheels. 99 6320054 – Wt. 59.4 lbs. . . . . . . . . . . . . . . . . . . . . .

199

B) 5 GALLON MODEL

Complete with 9 ft. hose, filling funnel, shut-off valve, and 4 ceramic nozzles. 6320049 – Wt. 29.2 lbs. . . . . . . . . . . . . . . . . . . . . .

17999

NOZZLE REPAIR KIT REPLACEMENT NOZZLES – 5 pack. For 6320054 and 6320049. 6320023 – 0.090" 6320021 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 2.99 6320024 – 0.095" 3/8" STEEL SHUT-OFF VALVE 6320025 – 0.115" 6320047 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.99 6320026 – 0.130" . . . . . . . . . . . . . . . . . . . . . . . . . 3.99/pkg.

5 GALLON VACUUM SANDBLASTER • Vacuum reduces dust while blasting paint, rust, scale, etc. • 18 to 28 CFM continuous duty; operating pressure: 65 to 125 PSI • 12" dia. plastic tank • Recycle function blasting gun • Can operate using most types of abrasives 8002957 – Wt. 27.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22999

REPLACEMENT NOZZLE

8004928 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.99 REPLACEMENT BRUSH HEAD

8004722 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.99

131

A I R

SIPHON SANDBLASTERS

BUILT BY PRINCESS AUTO

• Remove paint, scale, rust, or graffiti • Fill the hopper with any abrasive – silica sand, steel grit, aluminum oxide, glass beads, pecan shells, etc. • Wearing a hood, respirator and gloves is recommended • Air consumption: 5 CFM @ 100 PSI (A) 5 GAL CAPACITY SANDBLASTER 99 6320519 – Wt. 12.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . (B) 3 GAL CAPACITY SANDBLASTER 99 6320428 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

89 69

SPOT-TYPE SANDBLASTER • Automatic sand recovery allows for dustless blasting • Includes gun, 4 nozzles for different shaped surfaces, and 2 lbs. of sand • Requires min. 6 CFM @ 80 - 120 PSI 99 6320642 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT NOZZLE 6320691 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT 46 GRIT ALUMINUM OXIDE SAND 6320019 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.99 4.99

PISTOL GRIP SANDBLASTER • 90 PSI min. • Air consumption: 5 CFM • Holds 2.2 lbs. of sand • Comes with two 5 mm dia. ceramic nozzles 6320038 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT NOZZLES – PACK OF 2. 6320051 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3499

5.99/pkg.

SANDBLASTING GUNS MINI SANDBLASTING GUN

• Aluminum gun • 9" suction pipe and 9-1/2 ft. hose 6320071 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3399

REPLACEMENT NOZZLE 6320089 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.99

SANDBLASTING GUN

• Use with an air compressor and your own container • Includes gun with ceramic nozzle, steel pickup tube, 10 ft. abrasive hose, air jets, and hex key wrench 99 6320360 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT CERAMIC NOZZLE 6320006 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SANDBLASTER NOZZLE KIT

2.99

Includes replacement ceramic nozzle, 5/64" and 3/32" air jet, rubber packing, and o-ring. 6320535 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.49 HOBBY SANDBLASTING GUN

• Nozzle size: 1.5 mm • Working pressure: 40-55 PSI • Includes 22 cc jar and 290 grams of abrasive 6320029 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

132

1499

REPLACEMENT NOZZLE 6320045 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.99

REPLACEMENT SAND 6320044 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.99

SANDBLASTING ABRASIVES A) ALUMINUM OXIDE (80 grit)

A sharp, long lasting abrasive. Grains are blocky, containing no flats or slivers. Grains penetrate and cut even the hardest metals and sintered carbide. Fast cutting action minimizes damage to thin materials by eliminating surface stresses caused by heavier, slower cutting media. • Up to 10 times more durable than silica sand • Ideal for sandblasting cabinets 99 6320041 – 50.5 lb. bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I R

B) GLASS GRIT (30/40 grit)

Useful in providing a contaminant free substance by removing all foreign substances with little or no dimensional change. Provides a quality finish to improve adhesion of paint and related coatings. Applications include removing paints, varnishes, and lacquer; scale from high speed drills and cutting tools, carbon deposits. 99 6320042 – 44.9 lb. bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) GLASS BEADS (BT7 grit)

LASTER

A contaminant free environmentally friendly choice produces clean surfaces. Removes foreign substances from the base surface without dimensional change. Meets OSHA standards for cleaning and are manufactured to conform to US Military Specs. Bright satin finish is a desired effect in parts ranging from medical equipment to stainless steel propellers. 99 6320040 – 44.4 lb. bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) DUST NET (40/50 grit)

Sil 4 - DS2000 is a blasting abrasive that has been treated with TC1210 Dustnet. Nuisance dust is reduced up to 97% during handling; in blasting applications it reduces respiratory silica up to 76% and improves visibility by 50%. DustNet is non hazardous, and does not produce hazardous waste during use or in manufacturing. Ideal when blast cleaning lighter gauge metals such as automotive, farm equipment and anywhere a 2.5 - 3.0 mm profile is required for painting. 50.5 lb. bag

8009638 - WEST* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

* Available only in Winnipeg, Brandon, Regina, Saskatoon, Lethbridge, Calgary, Red Deer, Edmonton, Grand Prairie, Kelowna, Coquitlam, Prince George and Langley stores.

PROFESSIONAL SANDBLASTING HOODS E) SANDBLASTING HOOD

REPLACEMENT LENS

• Protects your face and eyes 6320451 – Wt. 0.1 lbs. . . . 3.99 • Vinyl construction • Large heavy duty 6" x 9" plexiglass window • Rear mesh vent for operator comfort • 1 size fits all 99 6320444 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) PROFESSIONAL SANDBLASTING HOOD

Universal fit, ANSI approved hard hat for comfortable fit. 8026165 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) PROFESSIONAL AIR SUPPLIED SANDBLAST HOOD

• CSA hard hat • Complete protection for face, eyes and upper torso • Internal air dispenser provides fresh air and cool down effect • Heavy-duty grained vinyl with felt lining • Large view replaceable 6" x 9" heavy duty plexiglass window • Adjustable 24" nylon web belt • 36" flexible air supply hose with adjustable regulator 8002053 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SANDBLASTING GLOVES

• 11" cuff • Protects hands while sandblasting • Positive grip on hands and fingers • Alkali and acid resistant 5050085 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . • Length: 2 ft. • Rubber gloves with vinyl arm protectors 5050107 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

6999

19999

SANDBLASTING HOSE

1699 24

• Industrial quality hose • 1/2" I.D. 8039945 – Wt./ft. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

399/ft

133

AIR SANDERS

I R

A) STRAIGHT LINE AIR SANDER

7999 99 8056541 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 C) AIR SANDER 99 3407277 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 D) 5" HIGH SPEED SANDER 99 3407269 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 3408192 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) PROFESSIONAL STRAIGHT LINE AIR SANDER

REPLACEMENT BACKING DISC

3414737 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99 E) ORBITAL SANDER

4499

3407251 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT 6" PAD

3414141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99 F) PROFESSIONAL DUAL ACTION SANDER

6999

8031621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PERFORMANCE CHART A B C D E F

Speed Stroke Paper Size Avg. Air Consumption 2,100 SPM 1" 2-3/4" x 17-1/2" 7.0 CFM @ 90 PSI 2,100 SPM 1" 2-3/4" x 17-1/2" 5.0 CFM @ 90 PSI 8,000 SPM 3/16" 3-3/4" x 9" 6.0 CFM @ 60 PSI 20,000 RPM N/A 3", 4", 5" 4.5 CFM @ 90 PSI 9,000 RPM N/A 6" 6.0 CFM @ 60 PSI 9,000 RPM N/A 6” 6.0 CFM @ 90 PSI

SANDPAPER 10 PACKS For A & B 3410977 – 40 grit 3410978 – 80 grit 3410979 – 100 grit 3410980 – 150 grit 3410981 – 180 grit . . .

For C 3410983 – 80 grit 3410984 – 150 grit 3410985 – 180 grit 3410986 – 240 grit 99 /pkg.. 3410987 – 320 grit . . . . .

Air Inlet Wt. (lbs.) 1/4" NPT 6.0 1/4" NPT 7.1 1/4" NPT 4.3 1/4" NPT 2.5 1/4" NPT 4.0 1/4" NPT 4.4

ITEM 3408192 8056541 3407277 3407269 3407251 8031621

PRICE 79.99 119.99 44.99 38.99 44.99 69.99

For E & F 6" peel and stick sanding discs. 3410967 – 50/60 grit 3410968 – 80 grit 3410536 – 100 grit 3411032 – 180 grit 3410538 – 220 grit 3410539 – 320 grit 99 99 /pkg.. /pkg.. 3410540 – 400 grit . . .

AIR BELT SANDERS G G) BELT SANDER

• 16,000 RPM • Belt size: 3/8" x 13" • Air consumption: 6.2 CFM @ 90 PSI 3410906 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . .

9999

H) BELT SANDER

• 16,000 RPM • Belt size: 3/4" x 20-1/2" • 80 and 100 grit sanding belt included • Air consumption 14.2 CFM @ 90 PSI 3410205 – Wt. 2.9 lbs. . . . . . . . . . . . . . . .

14999

134

REPLACEMENT SANDING BELTS

3/8" x 13". 8000333 – 36 grit 8000349 – 50 grit 8000350 – 80 grit . . . . . . . . . . . . . . . . . . . . . . . . 1.59/ea.

3/4" x 20-1/2". 8000353 – 36 grit 8000355 – 50 grit 8000356 – 80 grit . . . . . . . . . . . . . . . . . . . . . . . . 1.99/ea.

ENGINE CLEANING & UNDERBODY GUNS

A) PROFESSIONAL WASHING GUN

• 1 litre aluminum cup • Adjustable air and liquid flow • Nickel plated aluminum gun 0434787 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

B) WATER/AIR WASHING GUN

• Attaches to air compressor and water supply • Adjustable air and water flow • Nickel plated aluminum construction 0434795 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

I R

2799

C) PLASTIC WASHING GUN

• 1 litre cup • Operating pressure: 55 - 70 PSI 0430474 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1699

D) ENGINE CLEANER

• Kit includes engine and machinery cleaner with 10" wand, 4 ft. suction hose • 3.0 CFM @ min. 60 PSI 99 0430026 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . Similar to above – Except with 24" wand. 99 0430071 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

13 14

E) ENGINE CLEANING GUN

• Requires 0.5 to 3.1 CFM @ 40 to 60 PSI • 4 ft. clear siphon hose 0430850 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1599

F) ENGINE CLEANING and UNDERCOATING GUN

• Can be assembled to use as either an engine cleaner or an undercoating gun • Air consumption: 11 CFM • Operating pressure: 55-70 PSI 99 0432344 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

G) UNDERCOATING GUN

• Nozzle: 7/32" I.D. • O’all dim: 9" x 11" x 2" • Flow regulator 0432377 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

AIR RATCHETS

2499

H) 1/4" AIR RATCHET

Torque: 20 ft.-lbs. 8035814 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

I) 3/8" AIR RATCHET

Torque: 50 ft.-lbs. 3407178 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999

J) 3/8" VARIABLE SPEED AIR RATCHET

Torque: 50 ft.-lbs. 3400219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5999

K) 1/2" AIR RATCHET

Torque: 50 ft.-lbs. 3407053 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J

4499

L) 1/2" QUICK RELEASE AIR RATCHET

Torque: 50 ft.-lbs. 8006953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5999

M) 1/2" HEAVY DUTY AIR RATCHET

Torque: 60 ft.-lbs. 3410829 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7499

PERFORMANCE CHART H I J K L M

Dr. Max. Speed 1/4" 240 RPM 3/8" 150 RPM 3/8" 175 RPM 1/2" 150 RPM 1/2" 150 RPM 1/2" 150 RPM

Max. Torque 20 ft.-lbs. 50 ft.-lbs. 50 ft.-lbs. 50 ft.-lbs. 50 ft-lbs. 60 ft.-lbs.

Avg. Air Consumption 3.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 3.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI

Air Inlet Wt. (lbs.) 1/4" NPT 1.2 1/4" NPT 2.5 1/4" NPT 2.8 1/4" NPT 2.5 1/4" NPT 2.9 1/4" NPT 2.7

ITEM PRICE 8035814 29.99 3407178 39.99 3400219 59.99 3407053 44.99 8006953 59.99 3410829 74.99

135

A I R

AIR IMPACT WRENCHES

A) 3/8"“BUTTERFLY”

Torque: 75 ft.-lbs. 3407236 . . . . . . . . . . . . . . . . . . . . . . . . .

3999

B) 3/8" PISTOL GRIP

Torque: 125 ft.-lbs. 3410058 . . . . . . . . . . . . . . . . . . . . . . . . .

C) 1/2" PISTOL GRIP

Torque: 230 ft.-lbs. 3407244 . . . . . . . . . . . . . . . . . . . . . . . . .

3999

D) 1/2" HEAVY DUTY PISTOL GRIP

Torque: 380 ft.-lbs. 3416054 . . . . . . . . . . . . . . . . . . . . . . . . .

9499

E) 3/4" PISTOL GRIP

Torque: 500 ft.-lbs. 3407673 . . . . . . . . . . . . . . . . . . . . . . .

13999

F) 3/4" HEAVY DUTY PISTOL GRIP

Torque: 800 ft.-lbs. 8029402 . . . . . . . . . . . . . . . . . . . . . . .

24999 E

G) 1" HEAVY DUTY D-HANDLE

Torque: 1,100 ft.-lbs. 8011448 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43999

PERFORMANCE CHART A B C D E F G

Dr. 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 1"

Max. Speed Max. Torque 11,000 RPM 75 ft.-lbs. 8,500 RPM 125 ft.-lbs. 7,000 RPM 230 ft.-lbs. 7,000 RPM 380 ft.-lbs. 5,000 RPM 500 ft.-lbs. 4,600 RPM 800 ft.-lbs. 3,000 RPM 1,100 ft.-lbs.

Avg. Air Consumption 2.5 CFM @ 90 PSI 3.0 CFM @ 90 PSI 4.5 CFM @ 90 PSI 5.1 CFM @ 90 PSI 7.5 CFM @ 90 PSI 7.5 CFM @ 90 PSI 12.0 CFM @ 90 PSI

Air Inlet Wt. (lbs.) 1/4" NPT 1.8 1/4" NPT 3.2 1/4" NPT 5.2 1/4" NPT 6.3 1/4" NPT 9.8 1/4" NPT 11.2 1/2" NPT 33.6

ITEM 3407236 3410058 3407244 3416054 3407673 8029402 8011448

PRICE 39.99 49.99 39.99 94.99 139.99 249.99 439.99

INDUSTRIAL IMPACT WRENCHES I) 1/2" IMPACT WRENCH

H) 3/4" IMPACT WRENCH

136

• Twin hammer impact mechanism • No load speed: 5,500 RPM • Max. torque : 1,100 ft-lbs. • Operating air pressure: 90 PSI • Air consumption: 12 CFM • Air inlet: 3/8" NPT 8002913 – Wt. 13.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

47999

• Twin hammer impact mechanism provides more power and smooth impact blows • Pressure-feed lubrication system allows external injection of grease to lubricate hammer mechanism for longer life • Steel hammer case provides max. protection • Handle exhaust with muffler • No load speed: 7,000 RPM • Adjustable torque settings • Torque: 500 ft-lbs. max. • Air consumption: 7 CFM @ 90 PSI • 1/4" NPT inlet 99 8020991 – Wt. 5.7 lbs. . . . . . . . . . . . . .

149

AIR HAMMERS & ACCESSORIES

A) 6 PC KIT

3407095 . . . . . .

1999

I R

B) 8 PC KIT

3405420 . . . . . . . .

3499

C) 11 PC KIT

5999

3405271 . . . . . . . .

PERFORMANCE CHART

BPM A 4,500 B 3,000 C 2,100

Shank 0.401 0.401 0.401

Stroke 1-5/8" 2-5/8" 3-1/2"

Avg. Air Consumption 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.5 CFM @ 90 PSI

Air Inlet 1/4" NPT 1/4" NPT 1/4" NPT

Wt. (lbs.) 3.1 4.9 6.7

ITEM 3407095 3405420 3405271

PRICE 19.99 34.99 59.99

AIR HAMMER CHISEL SETS D E

D) 4 PC SHORT SHANK CHISEL SET

599 1699

3401601 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . E) 6 PC LONG SHANK CHISEL SET 3410277 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . F) 9 PC CHISEL SET

5 long shank and 4 short shank chisels. 3410213 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . .

2199

INDIVIDUAL AIR HAMMER CHISELS G H

Type Angled weld breaker Sheet metal trimmer

Wt. (lbs.) 0.3 0.3

ITEM PRICE 3416534 3.49 3416583 3.49

AIR HAMMER ATTACHMENTS I

I) PROFESSIONAL QUICK-CHANGE CHISEL CHANGER

• Change chisels quickly and easily • High quality chrome finish 3411005 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

J) PANEL CRIMPER

• Forms a step in sheet metal allowing patch panel to set flush • Has standard 0.401 shank 99 3410255 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

K) 9" NEEDLE SCALER

Removes rust, scale, welding flux, etc. 3416393 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2599

SPRING RETAINERS 2 per pkg. 3409810 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299 137

A I R

AIR CUT-OFF SAW

AIR RIVETER

• Free speed: 18,000 RPM • Working pressure: 90 PSI • Air consumption: 5.5 CFM • Includes 2-7/8" dia. cut-off wheel 3410087 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Nose pieces: 3/16", 5/32", 1/8", and 3/32" • Capacity: 3/16" dia. • Avg. air consumption: 4.0 CFM @ 90 PSI • Air inlet: 1/4" NPT 3416468 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3999

AIR OPERATED TEXTURING GUN • Use to spray most liquid dry wall materials from joint cement to ceiling acoustics, wall texture, spatter, semi-fog, or any other sprayable material that will feed through the hopper by gravity • Air consumption: 8 to 10 CFM • Operating pressure: 15-50 PSI 3406063 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9999

REPLACEMENT JAWS 3410154 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

7.99

AIR POWERED CAULKING GUN

7499

STRAIGHT GRIP AIR OPERATED PUNCH/FLANGE TOOL

• Use air to dispense all types of caulks, sealants, and adhesives in standard cartridges • 40-90 PSI operating pressure • All metal barrel and handle 3414984 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

AIR POWERED FRAMING NAILER

• 2-in-1 metal working tool • Punch dia.: 5 mm • Punch capacity: 1.6 mm • Crimps up to 14-gauge sheet steel • Average air consumption: 4.0 CFM @ 90 PSI • Punches holes for riveting and welding applications 3410012 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9999

PISTOL GRIP AIR OPERATED PUNCH/FLANGE TOOL • 2-in-1 metal working tool • Punch diameter: 5 mm • Punch capacity: 1.6 mm mild steel max. • Crimps up to 14-gauge sheet steel • Operating pressure: 90 PSI • Punches holes for riveting and welding 8012768 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Uses 34° 2" to 3-1/2" x 0.113" to 0.131" clippedhead framing nails. Compatible with Senco, Bostich, Porter Cable, Finish Pro, Hitachi, Paslode, Accuset, DeWalt and Craftsman nails • 80-110 PSI operating pressure; 120 PSI maximum • Rubber nose tip for reducing surface damage • Comfortable rubber grip handle • Air exhaust adjustable 360° 99 8006020 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . . . . .

299

AIR TOOL OIL

7999

AIR INLINE OILER • 1/4" NPT connections • Prevents air line contamination, tool burn out, and rust • Attach between air hose and tool 8038777 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

TECH TIPS 138

Always remember to use eye protection when using any air tool.

999

• Engineered for all air tools • Prevents rust formation • Synthetic blend specially formulated for air tools subject to extreme temperatures ranging from -55°C (-67°F) to 250°C (482°F) • Seal conditioner • Prevents gum and sludge build up OIL CANNOT BE SHIPPED A) 4 OZ.

8005089 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . B) 500 ML. 8015266 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299 499

METAL CUTTING AIR TOOLS

A) PROFESSIONAL AIR SHEAR

A B

8015872 . . . . . . . . . . . . . . . B) PROFESSIONAL AIR SHEAR

8015845 . . . . . . . . . . . . . . .

I R

8999 8999

C) AIR SHEAR

5999 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

3408226 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) AIR SHEAR

3407137

E) PROFESSIONAL AIR NIBBLER

4 position cutting head. 8045885 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999

PERFORMANCE CHART A B C D E

Cutting Cap. 17-Gauge 17-Gauge 18-Gauge 18-Gauge 17-Gauge

Max. Speed 2,600 RPM 2,600 RPM 2,500 RPM 2,700 RPM 3,500 RPM

Avg. Air Consumption 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI

Air Inlet Wt. (lbs.) 1/4" NPT 2.4 1/4" NPT 3.1 1/4" NPT 2.4 1/4" NPT 2.8 1/4" NPT 2.0

ITEM 8015872 8015845 3408226 3407137 8045885

PRICE 89.99 89.99 59.99 59.99 79.99

REPLACEMENT AIR SHEAR BLADES

Blade Kit

Centre Blade

(Centre and side blades)

For A and B C and D

ITEM 8025816 3410974

REPLACEMENT PARTS FOR (E)

Die and cutter. 8049435 . . . . . . . . . . . . . . . . . . . . . . . . . . 19.99 Punch. 8049426 . . . . . . . . . . . . . . . . . . . . . . . . . 3.59/ea.

(Only)

PRICE 19.99 9.99

ITEM – 3400023

PRICE – 5.99/ea.

AIR BODY SAW • Cuts all types of aluminum, plastic, fibreglass, and metal • Cutting cap.: up to 1/2" • Average air consumption: 3 CFM @ 90 PSI 8045849 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

REPLACEMENT BLADES – PKG of 5

3410060 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.99/pkg.

TECH TIP Improper use of grinding wheels may cause breakage and serious injury. Check all grinding wheels for cracks or any other damage before use. Check the tool speed against the established maximum safe operating speed that is marked on the wheel. Don’t use a grinding wheel that has a lower rated maximum speed than the speed of the grinder. Ensure that the wheel fits the machine arbor properly. Always use the wheel guard that is provided on the machine. Always use protective eye wear while grinding.

AIR ANGLE GRINDERS

F G

F) 4" HIGH SPEED GRINDER

4599 99 3400160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 3407111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) 5" ANGLE AIR GRINDER

Speed

Air Consumption Wt. (lbs.) ITEM PRICE 2.9 3407111 45.99 4.7 3400160 129.99

F 16,000 RPM 4 CFM @ 90 PSI G 11,000 RPM 6 CFM @ 90 PSI

139

A I R

AIR DRILLS

A) 3/8" AIR DRILL

3407194 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

B) 3/8" REVERSIBLE AIR DRILL

Keyless chuck. 8020964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999

C) 3/8" HEAVY DUTY REVERSIBLE AIR DRILL

Adjustable side handle. 3415957 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999 99 3415270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 E) 3/8" HEAVY DUTY ANGLE AIR DRILL 99 3410014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

D) 3/8" ANGLE AIR DRILL

F) 1/2" REVERSIBLE AIR DRILL

Keyless chuck, adjustable side handle. 8020928 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8999

G) 1/2" HEAVY DUTY REVERSIBLE HIGH TORQUE AIR DRILL

Adjustable side handle. 3415940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11499

PERFORMANCE CHART

All air drills feature a 1/4" NPT inlet. Chuck Max. Speed Avg. Air Consumption Wt. (lbs.) A 3/8" 2,000 RPM 4.0 CFM @ 90 PSI 2.4 B 3/8" 1,800 RPM 4.0 CFM @ 90 PSI 2.5 C 3/8" 1,800 RPM 4.0 CFM @ 90 PSI 3.5 D 3/8" 1,900 RPM 4.0 CFM @ 90 PSI 2.3 E 3/8" 1,800 RPM 4.0 CFM @ 90 PSI 2.4 F 1/2" 450 RPM 6.0 CFM @ 90 PSI 3.8 G 1/2" 500 RPM 6.0 CFM @ 90 PSI 4.7

F ITEM 3407194 8020964 3415957 3415270 3410014 8020928 3415940

PRICE 499 69.99 79.99 109.99 119.99 89.99 114.99

AIR DIE GRINDERS H

H) 1/4" COMPACT DIE GRINDER

1999 I) 1/4" DIE GRINDER 99 3407186 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3416500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

J) 1/4" PROFESSIONAL DIE GRINDER

Variable speed. 3400217 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999 99 8004937 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 L) 1/4" ANGLE DIE GRINDER 99 3412004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 K) 110Â° DIE GRINDER

K L

M) 1/4" HEAVY DUTY ANGLE DIE GRINDER

Japanese bearings. 3410017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7499

PERFORMANCE CHART

140

H I J K L M

Air Inlet 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT

Free Speed 24,000 RPM 22,000 RPM 21,000 RPM 18,000 RPM 20,000 RPM 18,000 RPM

Collet Size 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

Avg. Air Consumption 3.0 CFM @ 90 PSI 5.0 CFM @ 90 PSI 3.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI 3.0 CFM @ 90 PSI

Wt. (lbs.) 0.9 1.6 1.3 1.5 1.4 1.4

ITEM 3416500 3407186 3400217 8004937 3412004 3410017

PRICE 19.99 29.99 49.99 59.99 49.99 74.99

DIE GRINDER KITS & ACCESSORIES

2 IN 1 DIE GRINDER/ CUT OFF TOOL KIT

I R 15 PC. 1/4" AIR DIE GRINDER KIT

• Free speed: 20,000 RPM • Working pressure: 90 PSI • Air consumption: 5 CFM • 1/4" and 1/8" collet • Includes: air tool, safety guard, cutting wheel arbor, 2 cutting wheels, 10 mounting stones, collet, 2 open end wrenches, nipple end 99 3400218 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . .

125 PC DIE GRINDER ACCESSORY KIT

• Speed: 22,000 RPM • Air consumption: 5 CFM • Air pressure: 90 PSI • Kit contains: air operated die grinder, 1/4" and 1/8" collet chuck, 10 grinding stones, 2 wrenches, male coupler plug end 3414620 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . .

3999

• Brush • 2 pc diamond point bit set • 2 pc mandrel • Grinding stone • Kit includes: 5 cutting discs, 2 sanding drums with 6 replacement discs, 3 aluminum oxide grinding points, 3 silicon carbide-grinding points, 6 polishing pads, and 2 stainless steel brushes • Mini sanding discs: 36 fine, 36 medium, and 20 coarse grits • 1 pc carrying case 99 8018842 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT 3 PC COLLET SET Sizes: 1/8", 3/32", and 1/4". 3410313 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

799/set

5 PC GRINDING STONE KITS

MOUNTED GRINDING POINTS D

• For drills or die grinders • Max. 25,000 RPM Type Shank Wt. (lbs.) ITEM A Cone 1/4" 0.1 3410779 1/4" 0.1 3410780 B Drum C Bullet 1/4" 0.1 3410782

C E PRICE 0.99/ea. 0.99/ea. 0.99/ea.

Max. 25,000 RPM. Type Shank Wt. (lbs.) ITEM PRICE D 1/4" 0.4 3415387 5.99/set E 1/4" 0.1 3410225 3.99/set

141

A C C E S S O R I E S

5 PC SHAPING CUTTER SET

10 PC GRINDING STONE KIT

• For rounding, shaping and patterning woods, soft non-ferrous metals, plastics, and rubber • Various shaped heads approx. 3/8" dia. x 7/8" long • 1/4" shaft 99 3410297 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

METAL PREPARATION SYSTEM 5 PACK

649/set

10 PACK

• For drills or die grinders • This system allows for quick interchanging of different discs 2" VELCRO SANDING DISCS

2" SURFACE CONDITIONING DISCS

• Primary application: ferrous and non-ferrous metals • Can also be used on wood, plastic, fibreglass, etc. • 25,000 RPM max. • Use with 2" arbor #3410858 (seen below) 3410976 – Fine grit 3410975 – Med grit 99 3410973 – Coarse grit . . . . . . . . . . . . . . . . . . . . /pkg.

• Excellent for deburring, blending, cleaning, polishing and finishing • Use on stainless steel, ferrous, and non-ferrous metals • 25,000 RPM max. • Use with 2" arbor #3410845 (seen below) 3410970 – 80 grit 3410989 – 180 grit 3410972 – 320 grit . . . . . . . . . . . . . . . . . . . . . . . .

299/pkg.

2" ARBOR for CONDITIONING DISCS

2" ARBOR for SANDING DISCS

• Velcro surface • For above conditioning discs • 25,000 RPM max. 3410858 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Velcro surface • Use with above sanding discs • 25,000 RPM max. 3410845 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

22 PC DIE GRINDER POLISHING KIT

CUT-OFF WHEEL KIT Contains five 3" x 1/32" A60T metal cutting cut-off wheels and mandrel. 3416591 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

CUT-OFF WHEELS

Contains: • Two 3/8" dia. mini felt bobs • Six 1/2" dia. mini felt wheels • Two 1" dia. felt wheels • Six mounted grinding points with 3/32" shanks • Two replacement mandrels with 1/8" shank • One 7/8" dia. wire wheel brush with 1/8" shank • One 1/8" collet • One 7/8" dia. cut off wheel • Polishing compound 99 8048659 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

142

• 25,000 RPM max. • 1/8" shank x 2" long 3410187 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• For cutting, grinding, or slotting of hard or ferrous metals • Use with electric drills or die grinder • Use with mandrel 3414562 (available separately) • 3/8" bore • Resin bonded aluminum oxide grain • Double fibreglass reinforcement Size Thickness 2" 1/16" 2" 1/16" 3" 1/32" 3" 1/16" 3" 1/16" 3" 1/8" 4" 1/16" 4" 1/16"

Max. RPM 30,600 30,600 25,000 25,000 25,000 25,000 19,000 19,000

Grit A36T A60T A60T A36T A60T A36T A36T A60T

ITEM 8009540 8009557 8009565 8009573 8009581 8009599 8009607 8009615

PRICE 1.69 1.69 1.99 1.99 1.99 2.19 2.99 2.99

MANDREL

• For above wheels • 1/4" shank 3414562 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

18 VOLT CORDLESS DRILL

O W E R

• Variable speed • 1 hour quick charger • 3/8" keyless chuck • 18 volt, 2-speed reversible motor • Includes: magnetic bit holder, 6 power bits, 6 drill bits, two 18V batteries, and carrying case 8032693– Wt. 10.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999

REPLACEMENT BATTERY 8030766 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29.99

3/8" ELECTRIC DRILL

1/2" HAMMER DRILL • 5.5 amp, 120 volt • 2,800 RPM • Variable speed • 1/2" chuck • Switch from hammer to regular drilling • Lock on switch 8011518 – Wt. 5.6 lbs. . . . . . . . . . . . . . . . . . . . . .

5999

18 VOLT CORDLESS RECIPROCATING SAW

• 3.3 amp • 2,500 RPM • Keyless chuck • Variable speed reversible motor 3400248 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . .

2999

O O L S

5.5 AMP RECIPROCATING SAW

• 7/8" stroke • 0-2,800 strokes per minute • Includes 1 battery with 1 hour charge time • Packaged in blow mould case 8001060 – Wt. 11.7 lbs. . . . . . . . . . . . . . . . . . . .

• 1-3/16" (30 mm) stroke • 0-2,400 strokes per minute • 120 volt, 60 Hz • 6 ft. cord 8000471 Wt. 7.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

7999

9999

ELECTRIC SHEAR • 4.0 amp, 120 volt • Cutting capacity: 14-gauge • Variable speed 8024103 – Wt. 5.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14999

REPAIR KIT FOR #8024103

Contains: 3 blades, 3 nuts, 2 bearings, and 3 hex screws. 8016078 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

ROTARY TOOL with FLEX SHAFT • Variable speed dial control • 8,000 - 30,000 RPM • 120 volt, 1 amp motor • Includes 41" flexible shaft, stand and 40 pc accessory kit • Ideal for carving, grinding, engraving and polishing 8045901 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . .

4999

143

P O W E R

T O O L S

ANGLE GRINDERS B A

ADJUSTABLE ANGLE GRINDER WRENCH

C D

Fits all angle grinder centre nuts. 3410859 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

499

C) 5" ANGLE GRINDER

A) 4" MINI ANGLE GRINDER

• 4.2 amps • No load speed: 11,000 RPM • Spindle thread: M10 x 1.25 • Arbor: 5/8" • Spindle lock for easy wheel changes 8007854 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . .

2999

• 5.8 amps • No load speed: 11,000 RPM • Spindle thread: 5/8" x 11 NC • Arbor: 7/8" • Adjustable handle for right or left hand • Spindle lock for easy wheel changes 3410957 – Wt. 5.7 lbs. . . . . . . . . . . . . . . . . . . . .

B) 4-1/2" ANGLE GRINDER

D) 7" ANGLE GRINDER

• 5.0 amps • No load speed: 11,000 RPM • Spindle thread: 5/8" x 11 NC • Arbor: 7/8" • Spindle lock for easy wheel changes 3410878 – Wt. 5.4 lbs. . . . . . . . . . . . . . . . . . . . . .

• 11.0 amps • No load speed: 8,500 RPM • Spindle thread: 5/8" x 11 NC • Arbor: 7/8" • Spindle lock for easy wheel changes 8003781 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . .

3999

6999

9999

DIAMOND SAWS E) 4-1/2" HAND HELD DIAMOND SAW

• 10 amp motor delivers 11,800 RPM • Adjustable base for precise depth or angle cutting • Bevel cuts from 0 to 45° • Includes: 4-1/2" diamond blade with 5/8" arbor, 2 wrenches • Use to cut concrete, granite, tile, marble, brick, asphalt and other non-metal materials • Includes water attachment for wet cutting 99 3400249 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

129

REPLACEMENT DIAMOND CUTTING WHEEL

4.5" dia. with 5/8" arbor and continuous rim design. 8001958 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 12.99 F) 7" BENCH MOUNT DIAMOND SAW

• 3.75 amp, 60 Hz, 3,600 RPM • Built-in reservoir for wet cutting • Suitable for cutting granite, tile, marble, brick, concrete, and other non-metal material • Tilting table 0° to 45° • Stainless steel table 8000365 – Wt. 29.6 lbs. . . . . . . . . . . . . . . . . . . . . . . See pg. 154 for 7" diamond blades.

12999

7" PORTABLE CHOP SAW • 7/8" arbor • 5 amp, 8,500 RPM • Retracting wheel guard • Spindle lock for fast, easy wheel changes • Abrasive wheel included 8019538 – Wt. 12.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

REPLACEMENT METAL CUT-OFF WHEEL

144

7" dia. with 7/8" arbor. 8035431 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.49

HEAT GUN with NOZZLES

O W E R

• Includes 4 interchangeable nozzles and plastic storage case • Heat resistant ABS housing • For use on caulking, bend or form plastics, strip paint, varnish, and lacquer • 120V/60 Hz with two heat settings: 375°C – 495°C and (700°F – 920°F) • Pre-dry paint for fast prep 99 6050078 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 AMP ELECTRIC IMPACT WRENCH

7" ELECTRIC SANDER/POLISHER

• 1/2" drive • Rocker switch for easy, 1-handed reversing • 230 ft.-lbs. of torque • No load speed: 2,100 RPM 3411038 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . . . .

• 11 amp • Variable speed: 1,000 to 3,000 RPM • 3-position handle to suit operator's preference • Spring loaded spindle lock • Dial speed control • Overload protection 99 8016700 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

9999

O O L S

10" RANDOM ORBITAL BUFFER/POLISHER

• Ball bearing construction • Includes applicator pad and buffer pad • D handle provides maximum control • Permanent magnet motor helps maintain speed under pressure 8005931 – Wt. 2.3 lbs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MISSING Have you seen this child?

6999

Sunshine Wood Date of Birth: April 6, 1987 Height: 5 ft. 7" Hair Colour: Brown Eye Colour: Brown Distinguishing Characteristics: Tattoos on all fingers of her left hand Missing From: Winnipeg, Manitoba Missing Since: February 20, 2004

1-800-387-7962 to report on a missing child anywhere in Canada

All calls confidential - No name required. A missing child is everyone's responsibility.

145

A C C E S S O R I E S

DRILL ACCESSORIES DRILL CHUCKS

5 PC QUICK CLUTCH CHUCK

3/8" JACOBS® HAND-TITE® KEYLESS CHUCK

3/8"-24m. 3416740 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . .

1999

1/2" PROFESSIONAL DUTY HAND-TITE® KEYLESS CHUCK

Turns your 3/8" drill into a 1/2" keyless. 3410003 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . .

2999

JACOBS® MULTI-CRAFT® CHUCKS 3/8" MULTI-CRAFT® CHUCK

3/8"-24m and key. 3416757 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . .

1299

1/2" MULTI-CRAFT® CHUCK

1/2"-20m and key. 3416773 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . .

599

4-WAY DRILL

1899 MASTER KEYS

KEYLESS CHUCK • 0 to 1/8" capacity • Fits Dremel, Craftsman and Ryobi die grinders, except cordless 3400195 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

99 A) 1/4" TO 1/2" 8016737 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . .

11 PC POWER NUT DRIVER SET

B) 1/2" TO 3/4" 8016728 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . .

• Chrome vanadium 1/4" shank nut drivers • Screw starter holds screws in correct starting position. The screw starter's sleeve slides over the screw to hold it securely without wobbling or disengaging • Includes 7 non-magnetic 4-1/2" long nut drivers: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"; 2 magnetic 2-1/2" long nut drivers: 1/4", 5/16"; quick disconnect coupler; and 4-1/2" long magnetic screw starter 99 8043191 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 PC POWER NUT DRIVER SET • 1/4" shank • Sizes: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16" • Made from S2 industrial steel • Fully heat treated for long life 99 8023676 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4 PC POWER NUT DRIVER SET Sizes: 1/4", 5/16", 3/8", and 7/16". 3410778 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

146

• Comes with 2 Phillips and 2 slotted bits • Adjustable depth control • 1/4" hex shank 3410085 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . .

3 PC POWER EXTENSION BARS

• Turns power drills into power nut drivers • 1/4", 3/8" and 1/2" sq. drive • 1/4" hex shank 99 3410174 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . .

DRILL SHARPENING JIG • Use with a bench grinder • Quickly resharpen drills to factory accuracy • Adjustable for all common drill angles and countersinks • Resharpens drill bits from 1/8" to 3/4" 3403631 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

FLEXIBLE DRILL SHAFT

20 PC PRECISION DRILL BIT SET

• Ideal for drilling in hard to reach areas • 44" long • 1/4" shank, 1/4" chuck 3414869 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Set of very small drill bits • Sizes #61 to 80 (0.0135" to 0.039") • Metal index box 3410147 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

2299

599 999

999

DRILL BIT SETS and CASES

A) 13 PIECE H.S.S. DRILL BIT SET

C) 60 PC H.S.S. NUMBERED DRILL BITS

• Sizes: 1/16" to 1/4" in 1/64" increments • Plastic index case 3416633 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Sizes 1 to 60 • Metal index case 3400039 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . .

599

2699

D) 21 PC METAL INDEXED DRILL BIT CASE

B) 21 PIECE H.S.S. DRILL BIT SET

1999

• Holds bits sizes 1/16" to 3/8" • O’all dim.: 6" x 4-1/2" x 1-1/4" 8037796 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

B) 29 PIECE H.S.S. DRILL BIT SET

E) 29 PC METAL INDEXED DRILL BIT CASE

• Sizes: 1/16" to 1/2" in 1/64" increments • Metal index case 3403979 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . .

2799

• Holds bit sizes 1/16" to 1/2" • O’all dim.: 7-1/2" x 4-1/2" x 2" 8037812 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Sizes: 1/16" to 3/8" in 1/64" increments • Metal index case 3416682 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . .

1/8" DOUBLE ENDED BITS

599

10 PC 12" BIT SET • High speed steel • Machine groove • Black finish • Sizes: 1/8", 9/64", 5/32", 11/64", 3/16", 7/32", 15/64", 1/4", 5/16", and 3/8" 3410811 Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• Pkg. of 12 • 2-1/4" long Wt. 0.1 lbs.

Type High speed steel Titanium

499

C C E S S O R I E S

ITEM PRICE 3410678 4.99 3410720 7.99

8 PC MINI DRILL SET

12" BITS • High speed steel • Machine groove • Black finish Wt. 0.1 lbs.

• High speed steel drill bits • Contains 2 each of sizes: 1/16", 3/32", 5/32", and 1/8" 99 3410810 –Wt. 0.1 lbs. . . . . . . . . . /pkg.

Size 1/8" 3/16" 7/32" 1/4" 5/16" 3/8"

60 PC HIGH SPEED STEEL DRILL SET Contains 10 of each bit

Contains 10 of each: 1/16", 5/64", 3/32", 7/64", 1/8" and 9/64". 99 8001967 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . .

ITEM PRICE (ea.) 3410786 2.99 3410795 3.79 3410788 3.99 3410794 4.99 3410791 7.99 3410796 9.99

2999/set

MULTI PACK INDIVIDUAL BITS • 6 pack • High speed steel Wt. 0.1 lbs.

Size ITEM PRICE /pkg. 1/16" 3410661 1.69 5/64" 3410662 1.69 3/32" 3410663 1.69 7/64" 3410664 1.99 1/8" 3410665 2.29

MASONRY DRILL BIT SET • For percussion and rotary drilling • Made from rolled steel • Contains 5 bits sizes: 3/16", 1/4", 5/16", 3/8", and 1/2" • Storage pouch 3410355 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

599/set

147

A C C E S S O R I E S

115 PC DRILL BIT SETS

INDUSTRIAL HIGH SPEED STEEL DRILL BITS

• Set includes: 29 drills 1/16" to 1/2" in 1/64" increments, 60 number bits, 26 letter bits • Decimal equivalents and tap sizes are marked on index box • Metal index box measures: 13-1/4" x 4-1/2" x 2-1/4" HIGH SPEED STEEL DRILL SET

6999 7999 13999

3409364 – Wt. 7.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TITANIUM HIGH SPEED STEEL DRILL SET 3400073 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COBALT DRILL BIT SET 8001905 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ITEM 3404845 3404852 3404860 3404878 3404886 3404894 3400003 3400004 3404928 3404936 3404944 3404969 3405008 3405040 3400095

PRICE 1.79* 1.79* 1.79* 1.99* 1.99* 1.39 1.39 1.49 1.59 1.79 1.99 2.49 2.89 3.99 7.99

*2 bits per package – order by package

29 PC HIGH SPEED STEEL BIT SET

13 PC TITANIUM DRILL BIT SET

• Open face metal case • 1/16" to 1/2" 3410955 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• High speed steel coated with titanium for greater heat dissipation making for a faster smoother cut • Sizes: 1/16" to 1/4" 3411068 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

TITANIUM DRILL BIT SETS

High speed steel coated with titanium for greater heat dissipation making for a faster smoother cut. A) 21 PC TITANIUM DRILL BIT SET

• Split point tips for accurate drilling • 1/16" to 3/8" in 1/64" increments 3410556 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . .

799

COBALT DRILL BIT SETS

2199

B) 29 PC TITANIUM DRILL BIT SET

148

Size 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 1/4" 5/16" 3/8" 1/2"

• Sizes: 1/16" to 3/8" in 1/64" increments • 2 each of all bits 5/32" and smaller • Metal index case 3416690 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . .

3299

• 135° split point tips for precision drilling • For hard steel, stainless steel, and abrasive materials • Open face metal case C) 21 PC COBALT DRILL BIT SET

Sizes: 1/16" to 3/8". 8014178 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

D) 29 PC COBALT DRILL BIT SET

Sizes: 1/16" to 1/2". 8014203 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999

INDIVIDUAL COBALT DRILL BITS Size 1/16" 1/8" 3/16" 1/4" 5/16" 3/8"

O’all Length 1-78" 3-1/8" 3-5/8" 4-1/4" 5-9/16" 5-3/16"

Flute Length 7/8" 1-7/8" 2-1/8" 2-3/4" 3" 3-1/2"

ITEM PRICE 3413945 2.49 3413986 2.99 3414026 4.39 3414034 5.99 3414042 9.99 3414059 12.99

COUNTER SINK BITS

Wt. 0.1 lbs.

Size Shank 5/16" 1/4" 3/8" 1/4" 1/2" 1/4" 5/8" 1/4" 3/4" 1/4"

ITEM 8031024 8031015 8031006 8030980 8030962

PRICE 3.99 4.99 5.99 6.99 7.99

ITEM 8031998 8032014 8032023

PRICE 2.99 3.49 3.99

DRILL BIT HOLDER

7 PC SPLIT RING STOP COLLAR SET

999

SPOT WELD CUTTERS • Quickly drill out spot welds on fenders, doors, etc. • Double-edged blade assures extra long life • Retractable pilot assures accurate cut 99 3410034 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . .

• Self starting tip • Cuts up to 1/8" material • Independently tested by an ISO 9001 certified testing facility • Rockwell hardness test 63.5

C C E S S O R I E S

DRILL GAUGE • Made of heavy gauge carbon steel • 1/16" to 1/2" in 1/64" increments 3410362 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

STEP DRILLS

Sizes

599

• Holds 29 bits sizes 1/16" to 1/2" • O’all dim.: 6-1/2"L x 2-1/8"W x 1-1/8"H 3411543 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bit

Contains: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", and 2 hex keys. 3400033 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

• Set screw never touches the drill bit • Sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" • Precision machined with black finish 8003091 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

FOR WOOD and PLASTIC

FOR METAL

DEPTH-STOP DRILL BIT COLLARS

199

3 PC TITANIUM STEP DRILL SET B

Shank Wt. (lbs.) ITEM PRICE 0.1 8035672 19.99 0.2 8035681 39.99

A 13 step 1/8" to 1/2" 1/4" B 12 step 3/16" to 7/8" 3/8"

MAGNETIC POWER BIT HOLDER 3417722 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

549

• Includes sizes: 1/8" to 1/2", 1/4" to 3/4", 3/16" to 7/8" • Self starting tip • Cuts up to 1/8" material • Independently tested by an ISO 9001 certified testing facility • Rockwell hardness test 63 8056550 –Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

5999

DRILL ACCESSORIES

6 PC TITANIUM DRILL SAW SET

MANDREL

• For air and electric die grinders • 1/4" and 3/8" arbor, 1/4" shank • Max. 18,000 RPM 2970002 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . • Sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" • Drills, saws, reams and cuts • For use on wood, metal or plastic 8042520 –Wt. 0.2 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

569/ea.

2 PC. DRYWALL SCREW ADAPTERS

1299

• Changes your power drill into an automatic screwdriver • Ensures a proper countersink of screw • 1/4" hex shank 99 2921633 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . /pkg.

149

A C C E S S O R I E S

DRILL ACCESSORIES

SAW DRILL

• 1/8" dia. • Drills, saws, reams, and cuts • For use on wood, metal, or plastic • Titanium coated 3400191 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

WOOD SAW

• 1-1/4" dia. • 1/8" shank • Drills, saws, reams, and cuts • For use on wood, plastic, particle board, etc. • Max. speed: 8,000 RPM 3400194 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

REAMER

549

• Use on soft metals, plastics, and wood • 3/8" shank 3410108 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

ROTARY FILES

MOUNTED POINTS

• For cutting hard and soft metal • High speed tool steel • Works on most air tools • Shank: 6 mm (1/4" shank) • Max. speed: 6,000 RPM

• Use to grind and shape metal • 1/8" shank

Wt. 0.1 lbs. A A) 2990018 – 1/2" x 1-1/4" B) 2990026 – 1/2" x 3/4" C) 2990034 – 1/2" x 1-1/4" . . . . . . . . . . . . .

C B

1199/ea.

A) 1/2" DIA.

3410118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 1/4" DIA.

3410119 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1299/ea.

3 PC ROTARY FILE SET

Includes one each of above rotary files. 2990307 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

3999/set

GRINDING STONES

Vitrified aluminum oxide grinding stones with 1/4" shank. 3418175 – 2-1/2" x 1" . . . . . . . . . . . . . . . . . . . . . . .

449/ea.

CHAINSAW SHARPENING STONE

• 3/16" dia., 1/8" shank • O’all dim.: 6-3/4" x 1-7/8" x 1/4" 8002467 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

399

299

MINI DRILL ACCESSORY SETS

199 199

MINI FLAP WHEELS

For sanding wood, metal, plastic, etc.

D) 5/8" DIA. x 1/2" x 3/8" SHANK 3410997 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . E) 1" DIA. x 1/2" x 3/8" SHANK 3410998 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

199 199

BIT EXTENSION SET

• 6" and 12" long • Features dual setscrews for secure bit attachment • O’all dim.: 14"L x 2"W x 7"H 99 3410836 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

DIAMOND POINT SETS H • 1/8" shank • Pkg. of 2 bits Wt. 0.1 lbs.

F G F) 8 PIECE ROTARY STEEL CUTTER SET

• Contains various sizes and shapes of rotary cutters • Use on metal, wood, or plastic 99 /set 3410125 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

G) 12 PC BURR and DRILL SET

• Solid carbide • 1/8" shank for drilling and shaping 3400079 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

999/set

H I J K L

J I

Type Cylindrical Spherical Rounded Conic Rounded Cylinder Conic

L ITEM 8053820 8053848 8053884 8053893 8053198

PRICE 0.99/set 0.99/set 0.99/set 0.99/set 0.99/set

20 PC DIAMOND POINT BIT SET

INDIVIDUAL ROTARY STEEL CUTTERS

• For use on metal, wood, or plastic • 1/8" shank

150

Wt. 0.1 lbs. M N O M) 3410126 – Cylinder N) 3410127 – Flame O) 3410128 – Ball . . . . . . . . . . . . . . . . . . . . . . . . . .

399/ea.

• Max. 25,000 RPM • 1/8" shank • For die grinders or drills • Assorted diamond point grinding bits • Includes case and see through lid 3410667 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

WIRE BRUSHES

1" WIRE TUBE BRUSH

• Includes: 2" coarse wheel, 3" coarse wheel, and 2" coarse cup brush • 1/4" shank 3410311 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899

• For fast removal of rust, paint, and scale from metal or wood • Use with electric drill • Coarse bristles 99 3410911 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . .

WIRE BRUSHES D

E Type A Brass coated wheel brush A Brass coated wheel brush A Brass coated wheel brush B Twisted wire wheel brush C C C D

stainless steel Brass cup brush Brass cup brush Brass cup brush Twisted wire cup brush stainless steel

Size

Shank

Wt. ITEM PRICE (lbs.) 0.1 3410630 1.49 0.2 3410631 2.19 0.3 3410632 2.99

2" 3" 4"

1/4" 1/4" 1/4"

3" 2" 3" 4"

5/16" 1/4" 1/4" 5/16"

0.3 0.2 0.3 0.7

3410646 3410634 3410635 3410636

5/16"

0.5

3410647 4.99

3.99 2.49 2.99 3.99

E) 3 PC BRASS COATED BRUSH SET

• 2" cup brush - max. 4,500 RPM • 2" wire brush - max. 7,500 RPM • 1" end brush • 1/4" shank 99 /set 3410502 – Wt. 0.4 lbs. . . . . . . .

A C C E S S O R I E S

NYLON ABRASIVE BRUSHES • Lasts up to 10 times longer than wire brushes • Abrasive grit is impregnated throughout each bristle • All brushes have a course grit • Will not rust and maintains shape

IDEAL FOR:

• Paint removal, corrosion, weld scale, and surface rust • Preparing metal surfaces for primers and paint H

F) 1" NYLON END BRUSH

1/4" shank. 3410619 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G) NYLON WHEEL BRUSHES

1/4" shank. 2" DIA.

499 3" DIA. 99 3410606 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4" DIA. 99 3410609 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3410879 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H) 2" NYLON CUP BRUSHES

1/4" shank. 3410613 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

899

I) 4" FLAP WHEEL BRUSH

1/4" shank. 3410616 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

SANDING DISCS • For use on power drills with rubber backing pad • 1/4" hole • Aluminum oxide Size 5" 7"

Grit fine, med., coarse fine, med., coarse

Qty. 25 5

Wt. (lbs.) 0.2 0.1

ITEM 2970179 2970178

PRICE 0.99 0.99

151

A C C E S S O R I E S

A) 6" BUFFING WHEEL

1/2" bore, 1/2" thick. 3414844– Wt. 0.3 lbs. . . . . . . . . .

999

B) JEWELER'S ROUGE

• For use on buffing wheels • Polishes brass, copper, gold, and stainless steel WHITE. 0.1 OZ. 3410095 – Wt. 0.1 lbs. . . . . . . . . RED. 0.1 OZ. 3410094 – Wt. 0.1 lbs. . . . . . . . . RED. 0.4 OZ. 2944494 – Wt. 0.3 lbs. . . . . . . .

259 259 399

C) 2-1/2" BUFFING WHEEL

1/4" shank. 3414851 – Wt. 0.1 lbs. . . . . . . . .

POLISHING and BUFFING SUPPLIES

D D) 4 PC POLISHING COMPOUND

• Use with buffing wheels only • Includes black emery, red rouge, brown tripoli, and white diamond 99 99 /set 2940427 – Wt. 1.4 lbs. . . .

BUFFING BONNET

MINI POLISHING SETS

Soft fiber. 1/4" shank. 8040443 – 3" dia. . . . . . . . . . . . . . . . . . . . . . . . . . 8040452 – 4" dia. . . . . . . . . . . . . . . . . . . . . . . . . .

499 699

BUFFING KIT • Buffing and polishing kit includes two 2-1/2" buffing wheels with 1/4" shank, white diamond block and a red rouge block • O’all dim.: 8-1/2" x 7-3/4" x 1-1/2" 3400232 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . .

• For polishing metals, plastics, and hard rubber • Use with polishing compound

BUFFING WHEEL • 4" buffing wheel with 1/4" shank • Max. 2,500 RPM • O’all dim.: 6" x 5-3/4" x 1" 3411050 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) MINI POLISHING SET

649

• For polishing metal and plastic • 1" and 1-1/2" dia. with 1/8" shank 3416930 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

699

F) MINI POLISHING SET

POLISHING/ SANDING KITS

Contains a 1/8" mandrel, 2 buffing wheels, and 1 felt wheel. 3410112 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

599

BUFFING WHEELS

• Less mandrel • Use for polishing metal and plastic Wt. 0.1 lbs. 3410097 – 1" dia. . . . . . . . . . . . . . . . . . . . . . . . . . . .

379 99 3410098 – 1-1/2" dia. . . . . . . . . . . . . . . . . . . . . . . . . 3

6" KIT

Contains: rubber backing pad with 1/4" arbor sanding disk and lambs wool polishing bonnet. 3410303 – Wt. 0.5 lbs.

2 PC 7/8" DIA. FELT WHEELS

6" RUBBER BACKING PAD Only

3410306 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . 6-1/2" POLISHING BONNET Only

3410304 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

699 399 399

152

299

REPLACEMENT MANDREL 3410137 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

1.99

G) MINI FELT BOB

• 3/32" shank • For polishing metal and plastic 3410110 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

7" KIT

Contains: rubber backing pad with 1/4" arbor, sanding disk, and lambs wool polishing bonnet. 3410308 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

• For polishing metal and plastic • Mandrel not included 3410100 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1099 599

7-1/2" POLISHING BONNET ONLY 3410309 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

349

H) MINI JEWELRY POLISHING SET

Contains 3 polishing wheels, 1/8" mandrel, and stick of polishing compound. 99 /set 3410132 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

1-3/4" DIAMOND CUTTING WHEEL

CUT-OFF WHEELS

• 1/8" shank • For cutting ceramic, glass, metal, and plastic 8004544 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Includes 3 wheels • 1/8" shank 3410121 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1-1/4" CUT-OFF WHEELS

699

DIAMOND WHEEL SET

5 REPLACEMENT WHEELS 3410122 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

499/set

4.99/pk.

1-1/2" CUT-OFF WHEELS

• Max. 25,000 RPM • For cutting ceramic, glass, metal and plastic • Includes a 1/8" shank mandrel and two 3/4" dia. diamond cutting wheels 3410286 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Includes 3 wheels • 1/8" shank 3410644 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5 REPLACEMENT WHEELS 3410124 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

499/set

REPLACEMENT DIAMOND CUTTING WHEELS

Pkg. of 4 wheels. 3410287 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 5.99/pkg.

MINI SAWS A

699

7.99/pkg.

1-3/8" CUT-OFF WHEELS

• Pack of 10 • Cuts metal, wood, plastic, etc • Fits 1/8" mandrels 8033380 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

4 PC CUT-OFF WHEEL SET

• Mandrel • Three 3" x 1/16" x 3/8" cut-off wheels • Metal A54T BF 3411568 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

SAW KIT

A) SAW BLADE

3" dia. x 1/4" shank. 3416963 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

B) WOOD and PLASTIC SAW BLADE

4" dia. x 1/4" shank. 3416971 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Includes 2 blades for cutting soft metals, wood, plastic, etc. Includes mandrel for use in die grinders and drills etc, 8003272 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C C E S S O R I E S

1699

799 MINI WIRE BRUSHES

C) WOOD SAW BLADE

2" dia. high speed, 8,000 RPM wood saw blade with 1/8" shank. 99 3410280 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) METAL SAW BLADE

1-3/4" dia. high speed, 8,000 RPM soft metal saw blade with 1/8" shank. 99 3410279 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

FELT BOBS • 1/4" shank • For precision polishing Style Size I 3/4" x 1" J 1" x 1" K 3/4" x 1-1/2"

J ITEM 3410242 3410243 3410244

K PRICE 6.99 6.99 6.99

5 PC MINI FELT BOB SET

• 3/32" shank • For polishing metal and plastic • Includes 1 of each bob 8053161 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H • Max. 25,000 RPM • For drill or die grinder use Type Size ITEM E Stainless steel wheel brush 5/8" 8053900 F Brass wheel brush 1-1/2" 8053919 G Stainless brass end brush 5/16" 3410652

PRICE 1.49 1.49 0.99

H) MINI BRUSH and GRINDING SET

Kit contains: 1/2" stainless steel end brush with 1/8" shank, 1/4" brass end brush with 1/8" shank, mandrel with 3/16" shank, and 7/8" dia. wheel. 99 8053170 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

MINI BRISTLE and WIRE BRUSH SET

699

• Variety of 5 bristle and wire brushes • Use for cleaning and polishing metal • 1/8" and 3/32" shanks. 8053189 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

399/set

153

DIAMOND & ABRASIVE WHEELS

C C E S S O R I E S

DEPRESSED CENTRE GRINDING WHEELS SUPER THIN DEPRESSED CENTRE CUTTING WHEELS

• 1/4" thick wheels • Aluminum oxide grain • Primary application: ferrous metals Size Type Max. Wt. ITEM PRICE (dia. x bore) RPM (lbs.) 4" x 5/8" A24N 13,500 0.3 3402963 3.89 4-1/2" x 7/8" A24N 13,500 0.3 3416096 4.49 5" x 7/8" A24N 12,200 0.4 3402955 4.89 7" x 7/8" A24N 8,500 0.9 3416153 7.49 4" x 5/8" A24R 13,500 0.3 3412368 3.89 4-1/2" x 7/8" A24R 13,500 0.3 3412376 4.49 5" x 7/8" A24R 12,200 0.5 3416161 5.29 7" x 7/8" A24R 8,500 1.0 3401965 7.49 *A24N: Soft bond for fast stock removal. *A24R: General purpose grinding. Long life.

Size (dia. x bore) 4 x 5/8" 4-1/2" x 7/8" 5" x 7/8" 7" x 7/8"

Type A60S A60S A60S A60S

Max. RPM 13,500 13,300 12,200 8,500

Wt. (lbs.) 0.1 0.1 0.1 0.2

ITEM

PRICE

3410387 3410072 3410074 3410389

2.99 3.29 3.99 4.99

A60S (FERROUS METALS)

STRAIGHT CUT-OFF WHEELS • A24R – Long life. Ferrous metals • C24R – Silicon carbide, concrete, stone, brick, etc. • A60S – Aluminum oxide, fast burr free cutting. Ideal for ferrous metals. Size Type Max. Wt. (dia. x bore) RPM (lbs.) 4-1/2" x 7/8" A24R 13,300 0.1 7" x 5/8" A24R 8,500 0.4 8" x 5/8" A24R 7,600 0.5 7" x 5/8" C24R 8,500 0.4 4-1/2" x 7/8"* A60S 13,300 0.1 5" x 7/8"* A60S 12,200 0.1 * 0.045" Super thin for fast cutting.

1/16" super thin for fast cutting.

ITEM PRICE 3402880 3402807 3402740 3416146 3410075 3410076

3.89 5.49 5.99 5.49 3.49 3.99

• A special aluminum oxide grain and hard bond for extremely long life • Fast, burr free cutting for ferrous and/or non ferrous metals (iron, steel, welds, etc.) 1/16" super thin for fast cutting. Size (dia. x bore) 4" x 5/8" 4-1/2" x 7/8" 5" x 7/8" 7" x 7/8"

Type A46N A46N A46N A46N

Max. RPM 13,500 13,300 12,200 8,500

Wt. (lbs.) 0.1 0.1 0.1 0.2

ITEM

PRICE

3410390 3410391 3410392 3410393

2.99 3.39 3.99 4.99

A46N ALUMINUM (NON-FERROUS METALS)

• A special aluminum oxide grain and soft bond for aggressive cutting without loading • Primary application: non ferrous metals (aluminum, copper, brass, etc.)

DIAMOND CUTTING WHEELS

• For use with angle grinders or circular saws

A) SEGMENTED STYLE

• A segmented style wheel is a general purpose wheel for cutting concrete, masonry, tile, granite, marble, asphalt, and brick. • Can be used for wet or dry cutting applications B) TURBO STYLE

• These blades are designed to cut faster than the segmented style blade and will also give you a smoother cut. The turbo style blade is designed to give exceptionally long life. For cutting concrete, masonry, tile, granite, marble, asphalt, and brick. • Can be used for wet or dry cutting applications C) CONTINUOUS RIM

A continuous rim diamond wheel is designed to provide the smoothest cut of all 3 styles of diamond wheels. The outer rim is best suited for wet cutting and any applications where a smooth cut is required.

154

A A A B B B C C C

Size 4.5" 5" 7" 4.5" 5" 7" 4.5" 5" 7"

Style Segmented Segmented Segmented Turbo Turbo Turbo Continuous Rim Continuous Rim Continuous Rim

Arbor Size 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8"

Wt. 0.3 0.3 0.8 0.3 0.3 0.8 0.3 0.3 0.8

Max RPM 13,000 12,000 8,500 13,000 12,000 8,500 13,000 12,000 8,500

ITEM 3411010 3411011 3411012 8005106 8005151 8005080 8032041 8032069 8032078

PRICE 13.99 17.99 24.99 15.99 19.99 27.99 12.99 15.99 21.99

DEPRESSED CENTRE GRINDING and CUTTING WHEELS

GRINDING WHEELS

• For ferrous metals (iron, steel, welds, etc.) • 1/4" thick wheels Size Type Max. Wt. ITEM PRICE (dia. x bore) RPM (lbs.) 4" x 5/8" A24R 15,000 0.2 3410445 2.29 4-1/2" x 7/8" A24R 13,300 0.3 3410447 2.59 5" x 7/8" A24R 12,200 0.4 3410448 3.29 7" x 7/8" A24R 8,500 0.8 3410449 4.69 CUTTING WHEELS

• For ferrous metals (iron, steel, welds, etc.) • 1/8" thick wheels Size Type Max. Wt. ITEM PRICE (dia. x bore) RPM (lbs.) 4" x 5/8" A24R 15,000 0.1 3410450 1.99 4-1/2" x 7/8" A24R 13,300 0.2 3410451 2.29 5" x 7/8" A24R 12,000 0.2 3410452 2.89 7" x 7/8" A24R 8,500 0.4 3410454 4.19 9" x 7/8" A24R 6,500 0.7 3410455 5.49

SANDING DISC SYSTEM for ANGLE GRINDERS A

Max. Wt. ITEM PRICE RPM (lbs.) 15,200 0.1 8021133 2.49 13,300 0.1 8021142 3.29 12,000 0.1 8021151 3.89 8,500 0.2 8021160 4.79

C) SANDING DISCS

Wt. 0.1 lbs.

C Wt. (lbs.) 0.2 0.2 0.2 0.3

Size (dia. x bore) 4"x 5/8" 4-1/2"x 7/8" 5"x 7/8" 7" x 7/8"

• Fibre back • Double resin bonded Aluminum Oxide • For sanding fibreglass, wood, metal and plastic

A) BACKING PADS

Size 4" 4-1/2" 5" 7"

SUPER THIN CUTTING WHEELS

• For ferrous metals (iron, steel, welds, etc.) • 1/16" super thin for fast cutting Size Max. Wt. ITEM PRICE (dia. x bore) RPM (lbs.) 4"x 5/8" 15,200 0.1 3411028 2.69 4-1/2"x 7/8" 13,300 0.1 3411025 2.99 5"x 7/8" 12,000 0.1 3411029 3.69 7" x 7/8" 8,500 0.2 3411026 4.69 For masonry, stone, brick, concrete, etc.

C C E S S O R I E S

ITEM 3410441 3410442 3410443 3410444

PRICE 9.99 11.99 12.99 19.99

B) CENTRE LOCKING NUT

For attaching 4-1/2", 5", and 7" backing pad to grinders with 5/8" x 11 NC thread. 99 3410509 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Size 4" 4" 4" 4" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 5" 5" 5" 5" 7" 7" 7" 7"

Grit 24 36 50 80 24 36 50 80 24 36 50 80 24 36 50 80

ITEM 3410424 3410425 3410426 3410427 3410428 3410429 3410430 3410431 3410432 3410433 3410434 3410435 3410436 3410437 3410439 3410440

PRICE/disc 0.99 0.99 0.99 0.99 1.39 1.39 1.39 1.39 1.59 1.59 1.59 1.59 1.99 1.99 1.99 1.99

DEPRESSED CENTRE ZIRCONIA FLAP DISCS

• Use with angle grinders • Offers combination of grinding/blending through the use of thick layers of industrial quality abrasive cloth • Fast, cool grinding without clogging or loading • Combines the work of depressed centre grinding wheels and fibre discs • Primary applications: ferrous and/or non-ferrous metals

Size Grit Arbor Max RPM 4-1/2" 40 7/8" 13,300 4-1/2" 60 7/8" 13,300 4-1/2" 80 7/8" 13,300 5" 40 7/8" 12,230 5" 60 7/8" 12,230 5" 80 7/8" 12,230 7" 40 7/8" 8,500 7" 60 7/8" 8,500 7" 80 7/8" 8,500

Wt. (lbs.) 0.2 0.2 0.1 0.3 0.2 0.2 0.5 0.5 0.5

ITEM PRICE 3410591 3410592 3410593 8050048 8050057 8050066 8050075 8050084 8050093

9.99 9.99 9.99 11.99 11.99 11.99 21.99 21.99 21.99

155

A C C E S S O R I E S

WIRE BRUSHES

A) REGULAR TYPE

B) KNOT-TYPE

Removes paint, scale, rust, weld spatter, burrs, etc.

To prevent bending and reduces flares.

Dia. Thread Size 2-3/4" M10x1.25* 4" 5/8"-11 5" 5/8"-11 2-3/4" 5/8"-11 6" 5/8"-11 * For use with Wolf 4594, Makita 98501.

Wt. (lbs.) 0.6 1.4 1.9 0.6 0.3

A A A B B

3-1/2" KNOTTED WIRE CUP BRUSH

ITEM 8005132 8005134 3414257 8005305 8005306

PRICE 19.99 29.99 29.99 24.99 44.99

AIR TOOL CARE TIPS Whenever using an air tool or electric power tool, always wear safety glasses and any other recommended piece of safety equipment.

5/8" - 11 mounting to fit angle grinders. 3410296 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

RECIPROCATING SAW BLADES INDIVIDUAL HEAVY DUTY BI-METAL RECIPROCATING SAW BLADES

3 PACK HEAVY DUTY BI-METAL DEMOLITION RECIPROCATING SAW BLADES

High speed steel edge with alloy steel back for heavy duty, longer life performance.

• Long lasting, fast cutting for demolition work • Cuts metal and pipe, heavy metal, plate contoured shapes and tubing • 9" long x 7/8" extra wide x 0.062" extra thick 99 3410711 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . /pkg.

Wt. 0.1 lbs.

156

Blade Teeth Type ITEM PRICE Length /in. of Cut *6" 10 Nail Cutting 3413184 3.79/ea. *12" 6 Rough 3413200 8.49/ea. †4" 18 Extra Smooth 3413226 3.29/ea. †4" 24 Fine 3413234 3.29/ea. †6" 14 Smooth 3413242 3.79/ea. †6" 18 Extra Smooth 3413259 3.79/ea. †6" 24 Fine 3413267 3.79/ea. * Wood cutting blades are made to cut asbestos, plastics, hard, soft and nail embedded woods † Metal cutting cuts steel, stainless steel, cast iron, conduit and ferrous and non-ferrous metals

4 PACK 6" RECIPROCATING SAW BLADES

• 2 wood and 2 metal cutting blades • "Thermal treatment" for extended blade life • Precision ground teeth for accurate cutting • 1/2" universal shank 8013874 –Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1299

IMPACT SOCKETS DEEP and SHALLOW SETS

37 PC SET

Includes: • Sixteen 3/8" dr. deep sockets sizes: 8, 10, 11,12, 13, 14, 17 and 19 mm; 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" • Twenty 1/2" dr. shallow sockets sizes: 10, 11, 12, 13, 14, 17, 19, 21, 22 and 24 mm; 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1" • One 1/2" to 3/8" adapter • Metal carrying case 99 3414810 – Wt. 12.4 lbs. . . . . . . . . . . . . . . . . . .

As always, all of our sockets are backed by our Royal Service Promise: "No Sale is Final Until You're Satisfied."

CHROME MOLY SETS • These professional quality sockets meet demands of the tradesmen who need superior quality • All sets are Chrome moly heat treated steel • 6-point sockets • Flank drive design reduces socket breakage • Complete with metal storage box

SHALLOW SOCKETS

59 PC SET

Includes: • Thirteen 3/8" dr. shallow sockets sizes: 7 to 19 mm • Nine 3/8" dr. deep socket sizes: 5/16" to 13/16" • Eighteen 1/2" dr. shallow sockets sizes: 9 to 19, 21, 22, 23, 24, 27, 30, and 32 mm • Fifteen 1/2" dr. deep sockets sizes 3/8" to 1-1/4" • 3" - 3/8" dr. extension, 3" - 1/2" dr. extension • 1/2"F x 3/8"M adapter, 3/8"F x 1/2"M adapter • Sturdy plastic case 99 3410186 – Wt. 20.5 lbs. . . . . . . . . . . . . . . . . . .

Drive Qty. Sizes Wt. (lbs.) ITEM PRICE 1/2" 10 7/16" - 1" 2.8 3410677 29.99 1/2" 10 * 2.8 3415924 29.99 3/4" 8 1" - 1-1/2" 9.2 3410396 59.99

C C E S S O R I E S

DEEP SOCKETS

Drive Qty. Sizes Wt. (lbs.) ITEM PRICE 1/2" 11 3/8" - 1" 6.1 3410685 49.99 1/2" 11 * 5.7 3415932 49.99 3/4" 8 1" - 1-1/2" 14.7 8006926 99.99 *10, 11, 12, 13, 14, 16, 17, 19, 21, 22, 24 mm

7 PC TORX SET

6-Point Sockets SHALLOW SOCKETS

DEEP SOCKETS

Drive Qty. Sizes Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE 3/8" 8 5/16" - 3/4" 1.1 3409513 9.99 1.9 3408390 13.99 3/8" 8 * 1.1 3409323 9.99 2.0 3409331 13.99 1/2" 10 7/16" - 1" 2.9 3401155 19.99 5.5 3408408 24.99 1/2" 10 ** 2.5 3407798 19.99 4.7 3408416 24.99 3/4" 8 1" - 1-1/2" 9.2 3414760 49.99 12.1 3414778 74.99 3/4" 8 *** 9.1 3411019 49.99 11.7 3411020 74.99 1" 9 1" - 2" 16.9 3414828 99.99 – – – * 8, 10, 11, 12, 13, 14, 17 and 19 mm ** 11, 12, 13, 14, 15, 17, 19, 21, 22 and 24 mm *** 26, 27, 29, 30, 32, 35, 36 and 38 mm

• 3-1/4" dr. sockets E-6, 7, 8 • 4-3/8" dr. sockets E-10, 12, 14, 16 • Includes socket clip rail Wt. 0.5 lbs.

3415288 . . . .

1199

157

A C C E S S O R I E S

INDIVIDUAL IMPACT EXTENSION BARS

Drive Length 1/2" 3" 1/2" 5" 1/2" 10"

ITEM 3412202 3412210 3412228

PRICE 1.99/ea. 2.99/ea. 4.99/ea.

INDIVIDUAL 1/2" DR IMPACT SOCKETS Size 1/2" 9/16" 3/4" 1/2" 3/4" 15 mm 18 mm 15 mm 18 mm

Length Wt. (lbs.) Shallow 0.2 Shallow 0.2 Shallow 0.2 Deep 0.4 Deep 0.5 Shallow 0.2 Shallow 0.2 Deep 0.4 Deep 0.5

ITEM 3410921 3415809 3415825 3410926 3415858 3410943 3410944 3410945 3410946

PRICE 1.99/ea. 1.99/ea. 2.99/ea. 3.49/ea. 4.49/ea. 1.99/ea. 1.99/ea. 2.99/ea. 3.49/ea.

8 PC IMPACT ADAPTER SET Sizes: 1/4" F x 3/8" M, 3/8" F x 1/2" M, 1/2" F x 3/4" M, 1" F x 3/4" M, 3/8" F x 1/4" M, 1/2" F x 3/8" M, 3/4" F x 1/2" M, 1" F x 3/4" M, 99 8044671 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . .

UNIVERSAL IMPACT JOINTS High strength Chrome Moly steel construction. 3/8" DRIVE

899 1299 2799

8039240 – Wt. 0.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" DRIVE 8038018 – Wt. 0.4 . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4" DRIVE 8038027 – Wt. 1.5 . . . . . . . . . . . . . . . . . . . . . . . . . .

1/2" DR MAGNETIC THINWALL DEEP SOCKET SET

158

Wt. (lbs.) 0.3 0.5 0.9

WOBBLE IMPACT EXTENSION BAR SET

3/8" drive x 3", 6", and 8". 8040531 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . 1/2" drive x 3", 6", and 8". 8020795 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . .

1199 1499

IMPACT EXTENSION BAR SET

3/8" drive x 3", 5", and 10". 8024318 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . 1/2" drive x 3", 5", and 10". 8036234 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . 3/4" drive x 4", 6", and 10". 8044662 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

999 1499 2999

IMPACT SOCKET ADAPTERS 1/2" F x 3/8" M 3417771 – Wt. 0.1 lbs . . . . . . . . . . . . . . . . . . . . 3/8" F x 1/2" M 3417789 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 1/2" F x 3/4" M 3417797 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

149/ea. 149/ea. 299/ea.

UNIVERSAL JOINT IMPACT SOCKETS SETS

• 7-piece sets • 3/8" drive • Max. 100 ft.-lbs. torque Wt. 2.3 lbs. 3410318 – SAE: 3/8" to 3/4" 3410320 – Metric: 10 to 17 mm . . . . . . . . . . .

• Heavy duty chrome moly construction suitable for impact use • Colour coded vinyl sleeve • High strength plastic coated magnetic insert • Sizes: SAE: 13/16", 7/8", 1" and 1-1/16" Metric: 17, 19, and 21 mm. 99 8003720 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . .

2999/set

2-IN-1 FLIP SOCKET and EXTENSION KIT • Use 3" impact extension and double ended impact flip socket (3/4" and 13/16") with 1/2" dr. impact wrench • Fits most car wheel lugs 99 3409521 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

HOLE SAWS & ACCESSORIES BI-METAL HOLE SAW KITS • Cuts holes in various types of metal • Comes with mandrel adaptor, hex key wrench, and storage box

A) 13 PC KIT

• Includes 3 mandrels • Sizes: 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2" 99 8018744 – Wt. 4.0 lbs. . . . . .

B) 9 PC KIT

C) 7 PC KIT

• Includes 2 mandrels • Sizes: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2" 8018762 – Wt. 2.6 lbs. . . . . .

• Includes mandrel • Sizes: 7/8", 1", 1-1/8", 1-3/8", 1-1/2" 99 8018753 – Wt. 1.4 lbs. . . . . .

4999

HOLE SAWS

11 PC HOLE SAW KIT

1 PC BI-METAL HOLE SAWS

• 7/16" hex shank • Cuts steel, iron, brass, wood, aluminium, and plastic Size 1" 1-1/2" 2" 3"

RPM 2,700 2,400 2,000 1,500

Wt. (lbs.) ITEM PRICE 0.3 8033530 7.99 0.4 8033567 9.99 0.5 8033576 11.99 0.8 8033594 14.99 1/4" PILOT DRILL – For above hole saws 99 3410741 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• 7/16" hex shank • Fits one piece hole saws listed above 8018833 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

BI-METAL HOLE SAWS

• High speed steel edge welded to alloy steel back for heavy duty cutting • Cuts most machinable materials, sheet metal, nail-embedded wood, plywood, plastics, pipe and conduit RPM 3,000 3,000 2,700 2,700 2,400 2,400 2,100 2,000 2,000 2,000 1,800

Wt. (lbs.) 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.3 0.4 0.4 0.5

ITEM 8033601 8033610 8033647 8033656 8033665 8033674 8033709 8033718 8033727 8033745 8033763

1299

ADJUSTABLE HOLE CUTTER

12" DRILL EXTENSION

Size 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/8" 2-1/4" 2-1/2"

• 8 sizes of saws with bit and Allen key • Cuts: 3/4" to 2-1/2" • Suitable for wood and plastic • O’all dim: 7-1/2"L x 4-1/8"W x 2"H • Poly case 2920667 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C C E S S O R I E S

PRICE 4.99 4.99 4.99 5.99 5.99 6.99 7.99 9.99 10.99 10.99 11.99

• Cuts plywood, laminated composite boards, drywall, plastics, and rubber • Cut holes 1-1/8" x 4-5/8" dia. • Max. thickness: 1" 99 2929198 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HOLE SAW MANDRELS

D) 1-1/4" to 2-1/2" MANDREL

• 3/8" hex shank • For use with 1-1/4" to 2-1/2" hole saws 8018771 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

E) 3/4" to 1-1/8" MANDREL

• 3/8" hex shank • For use with 3/4" to 1-1/8" hole saws 8018806 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

159

JACKS

S H O P

& G A R A G E

PROFESSIONAL SERIES HYDRAULIC JACKS

• Can operate in any position: vertical, angle, horizontal • Rugged unibody construction • High stability • All external parts, ram, adjusting screw, and piston are “Parkerized”, preventing rust, corrosion, moisture deterioration, and excessive wear, giving the internal neoprene seals, o-rings, etc. longer life • Handle included Capacity Retracted Lift Screw Wt. (lbs.) (tons) Height Extension 12 9-1/2" 6" 3-1/2" 18.0 12 Low* 7" 3-3/4" 2-3/4" 14.6 16 9-1/2" 5-3/4" 4" 22.6 20 10-3/4" 6-1/2" – 31.5 20 Low* 8-1/4" 4" 3" 26.7

ITEM

PRICE

1010040 1010099 1010057 1010065 1010107

89.99 89.99 129.99 149.99 149.99

12 TON LOW

20 TON

* Low Profile Jack. Designed specifically to fit under rear axle where a standard unit would be too high, such as RV or trucking applications. *

HYDRAULIC BOTTLE JACKS 20 TON 4 TON

12 TON LOW

• Electrostatically painted to prevent corrosion • Heat-treated large diameter extension screw • Automatic oil bypass prevents overextension of ram • Handle included Capacity (tons) Retracted Height 2 6-3/4" 4 7-3/4" 6 8-1/2" 8 8-3/4" 12 9-1/4" 12 Low 7-1/2" 20 10-1/2 20 Low 8" 3 Longstroke 24" 5 Longstroke 24" 8 Longstroke† 24-1/4" 8 Longstroke*† 24-1/4"

Extended Height 13" 15-1/8" 17" 17-1/4" 17-1/2" 14" 18-5/8" 13-3/8" 44" 44-1/4" 44" 44"

Lift 4-1/2" 5" 5-1/4" 5-1/2" 5-1/4" 3-1/2" 5-1/2" 2-3/4" 20" 20-1/4" 19-3/4" 19-3/4"

* Clevis Bottom 3 & 5 TON

Screw Extension 1-3/4" 2-3/8" 3-1/4" 3" 3" 3" 2-5/8" 2-5/8" – – – –

8 TON SPEEDLIFT JACKS

Wt. (lbs.)

ITEM

PRICE

5.6 8.6 9.9 13.5 15.7 16.2 25.5 22.8 24.3 27.8 34.1 40.0

1010004 1010005 1010006 1010007 1010008 1010010 1010009 1010011 1010019 8035896 8039133 8039062

16.99 19.99 29.99 39.99 49.99 49.99 84.99 84.99 79.99 89.99 99.99 99.99

SPEED LIFT JACKS: Hit full extension with only 10 pumps of the handle on low pressure setting.

†

160

2 TON SCISSOR JACK

HYDRAULIC JACK OIL

13-1/2" max. height. 8047598 – Wt. 7.5 lbs. . . . . . . . . . . . . . . .

• For use in all hydraulic jacks, snow plows and refillable shock absorbers • Specially formulated with rust inhibitors, anti-wear agents, and anti-foam agents • 946 ml bottle 49 6420077 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

2499

AIR/HYDRAULIC BOTTLE JACKS

For use with an air compressor or as a manual jack. A) 12 TON PNEUMATIC BOTTLE JACK

• Min height: 10" • Ext. height: 15-3/4" • Screw extension: 2-3/4" 8003605 – Wt. 28.1 lbs. . . . . . . . . . . . . . . . . . . . . .

12999

B) 20 TON PNEUMATIC BOTTLE JACK

• Min. height: 10" • Ext. height: 17" • Screw extension: 3" 8003606 – Wt. 37.4 lbs. . . . . . . . . . . . . . . . . . . . . .

16999

C) 20 TON

• Min height: 9-3/4" • Ext. height: 17" • Screw extension: 2-3/4" • Pneumatic pressure: 120-200 PSI 1030060 – Wt. 40.9 lbs. . . . . . . . . . . . . . . . . . . . . .

19999

C) 30 TON

• Min height: 9-1/2" • Ext. height: 15-1/4" • Pneumatic pressure: 120-200 PSI 8018735 – Wt. 61.0 lbs. . . . . . . . . . . . . . . . . . . . . .

24999

C) 22 TON

• Air power lifts load quickly and easily • Ideal for industrial use application such as trucks, trailers, buses, and other heavy equipment • Min. height: 9" • Ext. height: 13" • Screw ext.: 17-3/4" 99 8003597 – Wt. 86.0 lbs. . . . . . . . . . . . . . . . . . . . . .

H O P

& G A R A G E

399

3,000 LB RACE JACK

Weighs only 37 lbs.!

• Lightweight, all aluminum design • Lifting range of 3-1/2" to 17-5/8" • 8 pumps to full service height 8002062 – Wt. 41.9 lbs. . . . . . . . . . . . . . . . . . . . . .

24999

2-1/2 TON ALUMINUM/STEEL JACK

3 TON SPEED LIFT JACK

• Lift range: 5" min. height, 19-1/2" max. height • 2 stage pump lifts to 11-1/2" on first stroke with no load 99 1030052 – Wt. 82.7 lbs. . . . . . . . . . . . . . . . . . . . . .

149

• Jack weighs only 54 lbs., for quick easy handling • Speed lift jack lifts to full service height in 10 strokes under load (3 strokes with no load) • Lift: min. 4", max. 19" 99 8003252 – Wt. 58.7 lbs. . . . . . . . . . . . . . . . . . . . . .

Do not use FLOOR JACKS to position vehicles, or as a SAFETY JACK. Use only on firm level surfaces.

199

161

HYDRAULIC FLOOR JACKS

H O P

& G A R A G E

8 pumps to full service height

QUALITY JACKS GREAT FOR: service stations, farm repair shops, road service, service trucks, and general shop use. Rugged construction, fully guaranteed. A B C

Capacity 2-1/4 tons 3-1/2 tons 10 tons

Lift Range 5-1/2" low, 31-1/2" high 4" low, 21" high 6-1/4" low, 15-3/4" high

O’all dim.: 46-1/2"L x 17"W 31-1/2"L x 15-1/2"W 61"L x 19"W

Wt. (lbs.) 127.6 101.4 319.0

ITEM 1030469 8002093 1030049

PRICE 249.99 179.99 699.99

FLOOR JACK SADDLE

TRANSMISSION ADAPTER

• Fits most 2-1/4 to 3-1/2 ton jacks • 4-3/4" x 4-3/4" rubber lift pad for raising vehicles requiring side lift without marring or damage • 1-3/16" shaft 99 1090014 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Remove the saddle from the floor jack and replace it with this adapter to convert jack to a transmission jack • 440 lb. cap. 99 1030477 – Wt. 28.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

TRANSMISSION/ DIFFERENTIAL JACK

1-1/2 TON TRANSMISSION JACK

• Capacity: 550 lbs. • Min. height: 8-3/4" • Max. height 22-1/2" • Saddle measures: 13" x 6-3/4" • Has a tie-down strap 1030002 – Wt. 37.9 lbs. . . . . . . . . . . . . . . . . . . . . .

Height: 51-1/2" min., 72" max. 1030042 – Wt. 88.0 lbs. . . . . . . . . . . . . . . . . . . . . .

11999

1/2 TON SINGLE STAGE TRANSMISSION JACK

162

19999

• Ideal for removal and installation of automobile, light truck, and tractor trailer transmissions or differentials • Universal saddle, brackets, and chain sling are fully adjustable to accommodate transmissions, clutches, and differentials in varying sizes • Safety overload system and safety bypass system prevent damage to cylinder • Flash chromed ram restricts rust from entering the hydraulic system • Pump handle rotates 360° • 4 swivel caster wheels allow easy positioning • Low frame easily clears undercarriage obstacles • Easily accessible release valve facilitates sensitive load lowering • Lifting range: 8" to 30" 99 1030021 – Wt. 338.0 lbs. . . . . . . . . . . . . . . . . . . .

999

FARM JACKS

• Lift, hoist, pull, or push anything up to 4,660 lbs. rated capacity • Tested to ASME/ANSI standards • All cast construction with top winch connector included allowing attachment of accessories • Powder-coated finish for durability When used over its 7,000 lb. max. capacity, the safety link will yield and the load will not lift.

• 2 ton (4,000 lbs.) capacity • Handle length: 30" • Base size: 4-3/8" x 7" • Lifting saddle: 1-1/2" x 4" 36" HIGH MODEL 1050036 – Wt. 30.4 lbs. . . . . . . . . . .

5999 6499 60" HIGH MODEL 99 1050037 – Wt. 37.2 lbs. . . . . . . . . . . 69 MAINTENANCE KIT 99 8007177 – Wt. 1.0 lbs. . . . . . . . . . . . . . . 7

H O P

36" HIGH MODEL 8000713 – Wt. 25.6 lbs. . . . . . . . 48" HIGH MODEL 8000714 – Wt. 27.7 lbs. . . . . . . .

& G

MAINTENANCE KIT

A R A G E

7999 8999 60" HIGH MODEL 99 8000715 – Wt. 30.1 lbs. . . . . . . . 94

48" HIGH MODEL 1050034 – Wt. 32.9 lbs. . . . . . . . . . . .

Includes the principal parts to restore your Hi-Lift jack: 2 lifting pins, 2 lifting pin dowels, 2 lifting pin springs, and grease. 99 8000668 – Wt. 0.5 lbs. . . . . . . . .

2 TON GARAGE STAND

JACK STANDS

• Ideal for holding or supporting items at a precise height • Triangular base support • Min. height: 69" • Max. height: 77" • 8" adjustable, ball bearing assisted screw extension 1090005 – Wt. 35.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Sold in pairs • “Positive Lock” handle • Load must be off the saddle column before column can be lowered Cap.

9999

SHOP CRANES & LIFTS

Height (min, max) 3 tons 11-1/4", 16-3/4" 6 tons 15-1/2", 23-1/4" 12 tons 20", 30"

Wt. (lbs.) 15.5 29.5 70.0

ITEM

PRICE

1090554 24.99 1090547 44.99 1090011 169.99

2 TON HEAVY DUTY FOLDING SHOP CRANE

2 TON SHOP CRANE Reinforced 5/16" wall

• Features low profile base, quick lift ram, handle for easy movement, retracting legs for easy storage • Lifting range: 8" to 67" 99 8002097 – Wt. 231.5 lbs. . . . . . . . . . . . . . . . . . . .

299

• 1/8" wall steel tube frame with 5/16" wall centre post and leg pivot channel • 4 position boom extends from 3 ft. 6" to 5 ft. 3" • Legs extend to 67-1/2" • Maximum boom height: 8 ft. 4" • Includes 8 ton long stroke speed lift ram with handle • Ram reaches full extension with only 10 pumps of the handle on high speed setting 99 8039437 – Wt. 241.0 lbs. . . . . . . . . . . . . . . . . . . .

349

163

S H O P

& G A R A G E

REPLACEMENT SPEED LIFT JACK

SHOP CRANE with ENGINE STAND ADAPTER

• For Powerfist shop cranes • Hits full extension with only 10 pumps of the handle • Retracted length: 24-1/4" • Stroke: 19-3/4" • Ext. length: 44" • Can only be used in a vertical position 8039062 – Wt. 40.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

9999

ENGINE HOIST LEVELER

• For use between an overhead lifting hoist and an unevenly weighted load like an auto engine with transmission intact • Balance point can be adjusted 12" side to side • Max. capacity: 1,500 lbs. 99 1580009 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Crane folds for easy storage • Boom adjusts from 3 ft. x 6" to 5 ft. x 3" • 1,500 lb. capacity engine stand adapter • 8 ton long stroke jack • O’all dim.: 72" x 43" x 59" 8008327 – Wt. 309.0 lbs. . . . . . . . . . . . . . . . . . . .

ADJUSTABLE CHAIN SLING

LIFT SLING

• For lifting motors from cars, trucks, tractors, and boats • Can be locked with long and short legs to hold a motor at proper angle for installation or removal • A bolt through the anchor lugs converts it to an excellent anchor loop for vertical lifting, horizontal pulling, stretching, or positioning • Capacity: 2,350 lbs. 99 1580133 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 3,800 lb. capacity as a vertical hitch, 3,000 lb. capacity as a choker hitch and 7,600 lb. capacity as a basket hitch • 1" wide nylon strap is formed into an 8 ft. loop 99 8021561 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

39999

ENGINE SUPPORT BAR • 1,100 lb. cap. • 14" screw depth • Width adjusts from 40" to 63" • Use on FWD vehicles to support powertrain when front sub-frame is removed • Allows for unobstructed access to FWD components, transmission, and bottom of engine 1090009 – Wt. 32.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1/4 TON LEVER STYLE CHAIN HOIST

164

• Min. distance between hooks: 10" • Lift height: 59" 8051699 – Wt. 4.7 lbs. . . . . . . . . . . .

7999

12999

ROPE HOIST Wondering how much effort it will take to lift your load? Divide the weight of the load by the number of pulleys in your hoist. Example: To lift a 1,000 lb. load using a hoist containing 7 pulleys, you would have to exert enough effort to move 142.9 lbs.

• 1,000 lb. capacity • 10 ft. lift • Comes with polypropylene rope • Nylon rollers • Cadmium plated roller housing 1550005 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

LEVER CHAIN HOISTS

• 180° load chain guide • Safety brake • Steel handle rotates 360° • Comes with swivel hooks and safety latch • Load can be raised or lowered by ratchet action of the handle • Freewheel position allows chain to be pulled quickly by hand to a lower position Ton Max. Min. dist. Wt. ITEM lift bet. hooks (lbs.) 3/4 59" 12-1/4" 18.1 1580016 1-1/2 58" 26" 28.9 1580017

TRIPLE GEARED CHAIN HOISTS

H O P

• Ideal for shop, garage, farm, and home use • Compact • Swivel hooks with safety latch • 10 ft. lift Cap. Wt. (lbs.) ITEM PRICE 1/2 ton 22.1 1580091* 79.99 1 ton 23.2 1580240 89.99 2 ton 31.3 1580216 119.99 *8 ft. 3" lift. PRICE

& G

2 TON BEAM CLAMP

139.99 179.99

TROLLEYS Fits beam widths 3" to 8-5/8". 8006070 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

4999

LIFTING CLAMPS

• Ideal for shop, garage, farm, and home use • Adjustable to fit various widths of I-beams Capacity Beam Widths Wt. ITEM PRICE Min / Max (lbs.) 1 ton 2-1/2" / 5" 28.8 1580539 129.99 2 ton 4-1/2" / 7" 44.8 1580547 159.99

Designed for lifting steel. Cap. Gap Size Wt. (lbs.) ITEM 1 ton 3/4" 8.4 2910217 2 ton 1" 15.0 2910218

A R A G E

PRICE 79.99 99.99

ENGINE STANDS

C B D

• Simplifies engine overhauls, holds engine at a convenient height to work on • Head swivels 360° for easy access to any part of the engine Model Capacity 3 Wheel 750 B 4 Wheel H-Style 1,000 C 4 Wheel U-Style 1,250 D 5 Wheel U-Style Folding 2,000 A

Base 32-1/2" x 30" 34" x 30" 34" x 33" 35" x 34"

Ht. 39" 36" 35" 35"

Wt. (lbs.) 46.1 54.0 65.0 101.5

ITEM 4272506 4270666 4279964 4270198

PRICE 59.99 69.99 99.99 149.99

165

S H O P

& G A R A G E

OIL DRAINING

GREASE PUMP B C

A) OIL DRAIN PAN

• Black polyethylene material • Splash guard rim and top mounted pour spout minimizes spillage • Cap.: 15 litres (4 gal.) 99 8006588 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) 5 GALLON GRAVITY FED OIL DRAIN DOLLY

• Extended max. height: 68" • Easy thumbscrew adjustment • Heavy duty, impact-resistant polypropylene 14" dia. funnel • 3-3/4" pour spout 8018708 – Wt. 30.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

C) 17 GALLON PORTABLE OIL DRAIN

• Swivel front wheel casters with grab handle for easy under vehicle positioning • 2 baffles, metal grating, and continuous side splash guards prevent oil spillage • Ideal for trucks, RV’s, and heavy equipment 99 8035529 – Wt. 37.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129

• Pump ratio: 50:1 • Grease delivery: 0 to 0.75 litre/min. (0.2 gal/min.) • Working air pressure: 70-100 PSI • Cap.: 11 litres (2.9 gal) • O’all dim.: 14-5/8" x 13" x 32-11/16" 99 4270207 – Wt. 39.6 lbs. . . . . . .

349

CREEPERS E

G F) FOLDING CREEPER

• 6 casters on metal frame with padded cushion • 3 position head rest • O’all dim.: 40" x 16-1/2" x 3-3/4" 4270142 – Wt. 18.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

D) ROLLER SEAT

• Metal frame with padded seat • 14" high • Base tray measures: 14" x 14" 4270216 – Wt. 10.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

4499

G) PLASTIC CREEPER

2999

E) PNEUMATIC ROLLER SEAT

166

• 300 lb. capacity • Min. height: 15" • Max. height: 20" • Seat dia.: 12" • Pneumatic shock height adjustment 4270215 – Wt. 14.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• 6 casters on oil and solvent resistant poly frame • Foam padded headrest • O’all dim.: 40-3/8" x 19-1/4" x 3-15/16" 99 8039008 – Wt. 14.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

H) MECHANICS’ FOLDING CREEPER

3999

• Frame supported by 7 casters • 2 positions (flat or as a seat) • O’all dim.: 48" x 18-1/2" x 4" 4270116 – Wt. 29.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

6499

BOOSTER CABLES & CHARGERS

BOOSTER CABLES

These heavy duty cables are made of premium quality polar/solar cord that remains flexible to -70°C (-95°F). 400 AMP CABLES: Have heavy duty sidekick clamp with extended jaw to easily grab side post terminals as well as top post. 600 AMP CABLE: Have parrot jaw clamps with heavy duty spring to ensure a tight grip on battery terminals. Cable Size Amps Length Wt. (lbs.) ITEM PRICE A 6 Ga. 400 12 ft. 5.1 4270150 29.99/pair A 4 Ga. 400 20 ft. 8.4 4270151 59.99/pair B 2 Ga. 600 20 ft. 10.0 4270152 99.99/pair

REPLACEMENT CLAMPS Amp Colour Wt. (lbs.) ITEM PRICE C 10 Red & Black 0.1 8000756 0.99/pr. D 500 Red 0.4 4272621 3.49/ea. D 500 Black 0.4 4272639 3.49/ea.

& G A R A G E

H O P

PARROT JAW

BATTERY CHARGERS F

I G H

E) 1 AMP TRICKLE CHARGER

• Ideal for overnight warming of motorcycle, ATV, snowmobile, and small garden tractor batteries to insure cold weather starts • 6/12 volt • Quick disconnect harness with ring-lug adapter • Reverse-polarity protection • Charges in 2 to 12 hours 99 4273587 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

F) 12 VOLT AUTOMATIC CHARGER/BOOSTER

• 2 amp trickle charge, 10 amp fast charge, 50 amp boost • Fully automatic, will not overcharge batteries 4270252 – Wt. 10.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

6/12 VOLT WHEEL-STYLE CHARGER/BOOSTER

• Multi-function tester with voltmeter for battery testing • Timer with shut-off and “Hold” position for continuous charging • Cooling fan for longer life H) 2/10/40/200 AMP

7999

• 2 amp trickle charge, 10 amp medium charge, 40 amp fast charge • 200 amp boost 4270245 – Wt. 36.6 lbs. . . . . . . . . . . . . . . . . . . . . .

22999

G) 6/12 VOLT CHARGER/BOOSTER

I) 30/60/300 AMP

• High output with portability for heavy duty use • 10 amp charge, 30 amp fast charge, 200 amp boost 99 4270076 – Wt. 24.9 lbs. . . . . . . . . . . . . . . . . . . . . .

• 30 amp charge • 60 amp fast charge • 300 amp boost 4270077 – Wt. 50.6 lbs. . . . . . . . . . . . . . . . . . . . . .

169

33999

167

CARTS & DOLLIES

VEHICLE DOLLY

H O P

• Ideal for moving disabled vehicles • O’all dim.: 15-1/2" x 23-1/2" • Max. cap.: 1,000 lbs. each 1090019 – Wt. 47.7 lbs. . . . . . . . . . . . . . . . . . . . .

9999/pr.

1,500 LBS ATV/MOTORCYCLE LIFT

& G A R A G E

• Low profile design; 2-1/2" to 16" lift range • Universal adapter adjusts to suit lawn tractors, motorcycles, ATVs and snowmobiles • 5 position automatic safety lock system 8002043 – Wt. 90.3 lbs. . . . . . . . . . . . . . . . . . . . .

15999

1,500 LB WHEEL DOLLY

• Remove or install truck, tractor, and heavy equipment wheel assemblies • Lift arm length: 26" • Lift arm spread: 25" max., 21"min. • Max. lift height: 6-1/2" • 31" long x 43" wide x 34" high • O’all dim.: 37-1/4" x 43" 1030012 – Wt. 191.4 lbs. . . . . . . . . . . . . . . . . . . .

39999

HAND CARTS

A Style Cap. (lbs.) Height. Toe Plate Flip Down Toe 550 50" 14" x 8" B Heavy Duty 800 50" 17-1/4" x 10" C Appliance 550 60" 3-1/2" x 24-3/4" * 4.10/3.50 x 4" – air filled wheel assembly A

168

Wheels 10" 4.10-3.50/5* 8" x 2"

Wt. (lbs.) ITEM 40.0 2060059 38.0 8011135 46.0 2060042

C PRICE 69.99 89.99 134.99

FOLD UP PUSH CART

3 TIER SERVICE CART

S H O P

• 220 lb capacity • 3-1/2" deep trays with non-slip rubber matting • 4" casters with brakes • O’all dim.: 29"W x 16"L x 34"H 2060088 – Wt. 36.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Rigid front casters • Swivel rear casters • Handle folds down for easy storage

& G 9999

PLATFORM DOLLY

330 LB CAPACITY

Platform: 29" x 19". 2060029 – Wt. 18.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

4999

660 LB CAPACITY

Platform: 35" x 24". 2060030 – Wt. 25.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

8499

Check out our stores nationwide for our full selection of trollies, dollies, and carts!

• 660 lb. capacity • 3" casters • O’all dim.: 30" x 18" 2060086 – Wt. 12.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

SCISSOR LIFT CART

A R A G E

3499

2 TON PALLET JACK

• 660 lb. cap. • Foot activated pump • Platform measures: 19-1/2" x 32" • Max. height: 35" • Min. height: 10-1/2" • 5" dia. casters • Locking rear swivel caster • Handle folds flat for easier storage • Platform moves up and down for proper positioning of load 8017549 – 155.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

329

• Fork: 21-9/16"W x 43-5/16"L • Min. lifting height: 3-3/8" • Max. lifting height: 7-7/8" • Double nylon wheel 4230054 – Wt. 184.0 lbs. . . . . . .

42999

BARREL DOLLIES

2-1/2 TON PALLET PULLER Capacity

Barrel Volume

Barrel Dia.

Wt. (lbs.)

ITEM

PRICE

728 lbs.

50 litres (13 US gal.) 205 litres (54 US gal.)

16"

13.0

2440008

39.99

24"

18.5

2440006

44.99

880 lbs.

4230078 – Wt. 17.2 lbs. . . . . . . . . .

4999

169

S H O P

PARTS WASHERS 20 GALLON PARTS WASHER

REPLACEMENT PUMP

• Replacement pump for parts washer 8022392 • Max. capacity: 132 GPH (2.2 GPM) 8022891 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

& G

3999

• Includes 115V pump, max. capacity: 132 GPH (2.2 GPM) • 20 gallon tub with 12 gallon working capacity • Safety link in lid hinge releases and automatically closes lid if fire starts • Parts tray, parts box and steel flex nozzle included 99 8022392 – Wt. 57.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A R A G E

199

24" REPLACEMENT FLEXIBLE NOZZLE 4218731 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14.99

5 GALLON BENCH TYPE PARTS WASHER

• Includes pump, tray, and steel flex nozzle • 5 gallon tub with 3.5 gallon working capacity • Safety link on lid hinge releases and automatically closes lid if fire starts • O’all dim.: 17" x 13" x 8-3/4" 99 8003630 – Wt. 20.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PARTS WASHER PUMP

PARTS WASHING BRUSHES A

• 110 volt epoxy encapsulated submersible pump • O’all dim.: 3" x 4-1/2" x 4" • Pumps 240 GPH (4 GPM) 4216107 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C A) 8" PARTS WASHING BRUSH

• 1" dia. • 100% pure nylon bristles 2917151 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

249

B) HUB CLEANING BRUSH

Ideal for cleaning hubs when repacking bearings, inside tubes, and other hard to reach places. 99 8044699 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) 8-1/2" PARTS WASHING BRUSH SET

• 2 flow through brushes fit 1/2" I.D. hose • Can be used with most parts washers 4273488 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PARTS WASHER FLUID/SOLVENT

170

4 LITRES 6400105 – Wt. 7.7 lbs. . . . . . . . . . 18.9 LITRES 6400113 – Wt. 35.0 lbs. . . . . .

699 3499

699/pr.

6499

PARTS WASHER SAFETY • Do not overfill with solvent. Fill to just below level of parts tray • Do not operate pump with low solvent level • Pump must be completely submerged • Use only in a well ventilated area • Do not operate near heat sources such as heaters, sparks, or open flame • Should fire occur in parts washer, do not attempt to move parts washer. Lid is on fusible link and will fall automatically to extinguish flame • Do not modify or jam lid to keep lid locked in an open position • Use only on grounded 120 volt, 60 Hz outlet • It is highly recommended to wear gloves suitable for solvent use and safety goggles when working with any solvents. Ensure that ventilation is adequate

CUT-OFF SAWS

INDUSTRIAL CHOP SAW WHEELS

14" CUT OFF SAW

• S.K.: General Purpose – Fast cool cutting • 1-BF: Fast cutting for structural metals • SAITECH: Fast cutting with long life – Good on stainless and ferrous metals • 3/32" thick x 1" bore

• 2 HP, 15 amp motor • 3,800 RPM • Cutting cap: pipe: 4" dia. x 1/4" thick, angle: 4" x 4" x 1/2" thick, solid: 1-1/2" dia. 3410956 – Wt. 33.6 lbs. . . . . . . . . . . . . . . . . . . . .

14999

METAL CUTTING BANDSAWS 9" HEAVY DUTY

Size Type Max. Wt. (lbs.) 12" 1-BF 5,100 1.0 12" Saitech 5,100 0.8 14" 1-BF 4,400 1.3 14" S.K. 4,400 1.5 14" Saitech 4,400 1.1

ITEM PRICE 3411040 10.99 3412418 14.99 3411041 14.99 3409703 16.49 3416203 19.99

H O P

& G A R A G E

• Cutting capacity: 8-7/8" @ 90º, 4" @ 60º, 6-1/4" @ 45º • Blade speed: 237 FPM • Blade size: 1" x 97-1/2" x .035" • Motor: 1-1/2 HP, 230V, 1,720 RPM • Gear drive • 0-60° swivel head for precision angle cuts • Cam lock quick release vice • Variable rate hydraulic down feed cylinder • Built in coolant lines, collection tray, filter and pump 8045518 – Wt. 464.0 lbs. . . . . . . . . . . . . . . . . .

239999

REPLACEMENT BI-METAL BLADE 8002192 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

49.99

7" HEAVY DUTY • Cutting capacity: Round: 7"; Flat: 1" x 12"; Rectangle – 7" x 10-1/2" • Blade speeds: 86, 132, 178, and 260 FPM • Blade size: 3/4" x 93" x 0.032" • Motor: 3/4 HP, 9/4.5 amps @ 115/230V, 1,720 RPM, totally enclosed Features:

• Variable rate hydraulic down feed cylinder • Reservoir for water based cutting oil • Built-in coolant pump and nozzle 3460015 – Wt. 330.0 lbs. . . . . . . . . . . . . . . . . .

119999

REPLACEMENT BLADES Carbon 3460022 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . Bi-metal 3460047 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

18.99 44.99

171

S H O P

& G A R A G E

5" BENCH TOP

• Cutting capacity: @ 90°: 5" x 8"; @ 45°: 5" x 5" • Blade speed: 80, 120, and 220 FPM • Blade size: 1/2" x 68" x 0.025" • Motor: 1/3 HP, 1,720 RPM • Swivel head for precision angle cuts 3410169 – Wt. 140.0 lbs. . . . . . . . . . . . . . . . . . . .

49999

REPLACEMENT BLADES Carbon 3460024 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . Bi-metal 3460048 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

13.99 34.99

4-1/2" with STAND

• Cutting capacity: @ 90° round: 4-1/2"; rectangular: 4" x 6" • Blade speeds: 80, 120, and 200 FPM • Blade size: 1/2" x 64-1/2" x 0.025" • Motor: 3/4 HP, 4.8 amp, 1,720 RPM 99 8002109 – Wt. 133.8 lbs. . . . . . . . . . . . . . . . . . . .

299

REPLACEMENT BLADES Carbon 3460748 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . Bi-metal 3462280 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

11.99 19.99

WATER SOLUBLE CUTTING OIL

• Protects material from rust and corrosion • Suitable for machining, cutting, tapping, and as a coolant for bandsaws • 4 litres 99 8034012 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BANDSAW BLADES

HEAVY DUTY BI-METAL BLADES

172

• High resistance to heat and wear • High shock resistance • Variable pitch reduces vibration • Long life and faster cutting • Good for cutting any machinable metal, conduit, angle iron, rebar, stainless steel, etc. Size Teeth Wt. ITEM PRICE /In. (lbs.) 1/2" x 64-1/2" x 0.025" 14 0.2 3462280 19.99 1/2" x 68"x 0.025"* 10/14 0.2 3460048 34.99 3/4" x 93" x 0.035"* 10/14 0.6 3460047 44.99 1" x 97-1/2" x 0.035" 8/12 1.0 8002192 49.99 *Variable pitch

CARBON STEEL BLADES

• Low cost • Reduces operating expense in mild steels • Good for pipe, tubing, solids, and all mild steels • 14 Teeth/In. Size Wt. ITEM PRICE (lbs.) 1/2" x 64-1/2"x 0.025" 0.2 3460748 11.99 1/2" x 68" x 0.025" 0.2 3460024 13.99 3/4" x 93" x 0.032" 0.6 3460022 18.99

CUSTOM WELDED BANDSAW BLADES

M42 Bi-metal, Matrix Bi-metal, Carbon Steel Hardback, Carbon Steel Flexback, and Meat Cutting blades are all available in just about any length, width and teeth per inch you could possibly need!

H O P

CARBON STEEL BLADES

For wood cutting and non-ferrous materials such as aluminum, copper, brass, etc.; plastics, cutting mild steel very slowly. • One piece construction • Teeth hardness Rc 64-67

BIMETAL BLADES

FLEXBACK CARBON STEEL

• Back hardness Rc 28-35 • Highest fatigue resistance of all blades • Lowest priced blade HARDBACK CARBON STEEL

• Back hardness Rc 42-48 • Back hardened for higher beam strength • Lower fatigue resistance than flexback

MEAT CUTTING BLADES

For meat cutting, wood cutting, aluminum, and non-ferrous materials. • Teeth hardness Rc 64-67 • Designed specifically for cutting meats & bone

For non-ferrous materials such as aluminum, copper, and brass; mild carbon steels, and solid steel sections. • Provides much longer life than carbon steel blades • Up to 3 times the heat resistance of carbon steel blades • May be run 2-3 times faster in mild steel over carbon steel blades • 8% cobalt MATRIX BIMETAL

• Teeth hardness Rc 66-68 M42 BIMETAL

• Higher heat resistance than Matrix blades • Teeth hardness Rc 67-69 • Recommended when cutting alloys or stainless steel

Please allow approximately 2 to 3 weeks for delivery. See your nearest Princess Auto store, or call our National Call Centre at 1-800-665-8685 for details and pricing.

& G A R A G E

SHOP PRESSES 50 TON INDUSTRIAL HYDRAULIC SHOP PRESS Moveable 6" Bore Ram Features: • User friendly valve can be mounted on either the right or left hand side of frame • Self-contained Power Pack can be easily detached for use in other applications • Easy to read hydraulic pressure gauge Specifications: • Max. working pressure: 3,600 PSI • Ram stroke: 5-1/2" • Working area (width): 34" • Ram to bed distance: 5-3/4" to 37-3/4" at 4" increments • Bed width: 11-3/4" • Ram horizontal travel: 26-1/2" • Ram speed: 32"/min. (no load), 8"/min. at working pressure • 2 HP continuous duty 208/230V motor • O’all dim.: 72"H x 53"W 99 3460068 – Wt. 525.0 lbs. . . . . . . . . .

Multiple Bed Heights

2899

BED PLATES • For shop presses • Sold individually • O’all dim.: 6" x 11-1/2" x 1-1/4" 3460016 – Wt. 24.2 lbs. . . . . . . . . . . . . . . .

4999/ea.

173

S H O P

& G A R A G E

30 TON HYDRAULIC SHOP PRESS

Specifications: • Max. working pressure: 3,800 PSI • Ram stroke: 5-1/2" • 3 position cylinder • Working area (width): 25" • Ram to bed distance: 1-1/2" to 22-1/2" at 3" increments • Bed width: 10" • Ram speed: 23"/min. extending, 27"/min. retracting • Electric motor: 2 HP, 3,450 RPM, 208/230 volts • Intermittent duty motor • O’all dim.: 70"H x 43"W 99 3460052 – Wt. 375.0 lbs. . . . . . . . . . . . . .

4-1/2" Bore Ram

Multiple Bed Heights

1899

REPLACEMENT END CAPS Replaces worn end cap or can be welded to customers’ own dies. Fits on the 30 ton press #3460052. 1250029 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 24.99 Fits on the 50 ton press #3460068. 1251388 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 19.99

20 TON SHOP PRESS FRAME

To be used with our Powerfist or professional series KYB hydraulic bottle jacks on page 160. For easier and quicker operation our Powerfist 12 Ton 8003605 or 20 Ton 8003606 air/hydraulic jacks from page 161 can be used. All shop press frames are of a bolttogether design for ease of shipping. All of our presses are backed by our Royal Service Promise: “No Sale Is Final Until You’re Satisfied.” Specifications: • Working range: 2-1/4" to 30-1/4" • Width between uprights: 24" • 7 bed positions at 4-3/4" increments • Bed width: 9-1/8" • O’all dim.: 60"H x 27-1/2"W 99 3460067 – Wt. 204.6 lbs. . . . . . . . . . . . . . . . . . . .

379

A) Replacement spring

1-3/4" dia. x 8-3/4" long. 3461449 – Wt. 1.6 lbs. . . . 14.99/ea.

174

B) Replacement end cap 3460080 – Wt. 1.3 lbs. . . . . .

9.99/ea.

PUNCH and DIE KIT for 30 or 50 TON PRESSES

DETERMINING TONNAGE REQUIRED FOR PUNCHING MILD STEEL (For materials with a tensile strength of approximately 65,000 PSI)

ROUND HOLES Punch x Material x 80 = Tons of pressure Diameter Thickness Replacement punch and dies are available from our Winnipeg Parts Department. See your nearest Princess Auto Store for details, or call our National Call Centre at 1-800-665-8685 • 30 and 50 ton press can punch up to 1/2" thick metal with 21/32" punch • 4 standard ironworker punches and dies: 9/32" (1/4"), 13/32" (3/8"), 17/32" (1/2"), and 21/32" (5/8") (brackets denote size of bolt or pin) • Die holder bed plate, adapter, punch holder, and stripper plate are zinc plated • Mounting instructions included 99 3460085 – Wt. 45.5 lbs. . . . . . . . . . . . . . . . . . . . .

299

For other materials multiply your result with these modifiers: Aluminum: 0.38 Brass: 0.70 Copper: 0.56 Steel (Mild): 1.00 Steel (50% carbon): 1.50 Stainless steel (303): 1.50 Steel (Cold drawn): 1.20

ARBOR PRESSES

Size Stroke 1 ton 4-1/2" 3 ton 12"

Working surface 4-3/4" dia. 7-1/2" dia.

O’all height 12-1/2" 23-1/2"

Wt. (lbs.) 34.0 135.5

PIPE & METAL BENDERS

ITEM 3460011 3460037

S H O P

& G A R A G E

PRICE 69.99 169.99

HYDRAULIC PIPE BENDERS

BENDS UP TO 2" PIPE

BENDS UP TO 3" PIPE

12 TON BENDER

• Includes dies for 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" pipe • Max. pipe thickness: 12 gauge (0.118"/3 mm) • O’all dim.: 21-1/2"H x 24"W x 6"D 3460019 – Wt. 92.4 lbs. . . . . . . . . . . . . . . . . . . . . .

26499

REPLACEMENT ROLLERS FOR 3460019 3460013 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . 16 TON BENDER

12.99/ea.

• Includes dies for 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", and 3" pipe • Max. pipe thickness: 8 gauge (0.176"/4.5 mm) • O’all dim.: 23-1/4"H x 30"W x 7"D 3460020 – Wt. 188.0 lbs. . . . . . . . . . . . . . . . . . . .

39999

REPLACEMENT DIES

For benders 3460020 and 3460019. Size Wt. (lbs.) ITEM 1/2" 1.5 3462181 3/4" 1.7 3462199 1" 2.5 3462207 1-1/4" 7.0 3462215 1-1/2" 5.2 3462223 2" 8.4 3462231

PRICE 9.99 10.99 14.99 19.99 24.99 44.99

175

UNIVERSAL METAL BENDERS

H O P

& G A R A G E

ROD BENDERS

D B

• Designed to make a variety of bends on flat or solid, round or square stock • Includes 7 dies; 1" to 3" for making different radius curved bends (u-bolts, etc) • Capacity for hot rolled mild steel: 5/16" x 2" flat stock and 5/8" solid square or round

• Forms round, square, and flat stock • Handles up to 3/8" solid materials • Shapes hooks, “S” loops, and others C) ROD BENDER

Bends in 1/2", 3/4", 1", 1-1/4", and 1-1/2" radii. 2910296 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A) BENCH MOUNT 2919001 – Wt. 42.8 lbs. . . . . . . . . . . . . . . . . . . . . . B) PEDESTAL MOUNT

13999

D) JUMBO ROD BENDER

O’all height: 38-1/2". 2910165 – Wt. 60.2 lbs. . . . . . . . . . . . . . . . . . . . .

16499

• Bends in 3/8", 3/4", 2", 3", and 4" radii • 16" handle for extra leverage 8006169 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

UNIVERSAL METAL BENDER

METAL BRAKE

• Bend angles up to 120° • Change radius by using different die plates • Cold steel cap.: 4" x 3/16" flat, 5/8" x 5/8" square, 11/16" dia. round, and 2-3/8" x 5/16" angle • Hot steel cap.: 4" x 9/16" flat, 1" x 1" square, 1" dia. round, and 3-3/4" x 7/16" angle 99 2910280 – Wt. 70.4 lbs. . . . . . . . . . . . . . . . . . . . . .

• Max. width of sheet 36" • Sheet metal cap.: 1/16" (1-6 mm)/16 gauge • Max. beam lift: 3/4" (19 mm) • O’all dimensions 44" x 40" x 24" 8043690 – Wt. 173.0 lbs. . . . . . . . . . . . . . . . . . . .

229

5999 9999

34999

METAL BENDER

BENCH TOP METAL BRAKES

Makes up to 90° bends. 18" CAPACITY

• Bend sheet metal up to 18-gauge and 18" wide • Lightweight aluminum construction 8039455 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

30" CAPACITY

176

• Steel construction • Bends material up to 17-gauge and 30" wide • O’all dim.: 31-1/2" x 6" x 2-7/8" 8008201 – Wt. 32.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

7999

• Designed to make a variety of bends on flat or solid, round or square stock • Capacity for hot rolled mild steel: 3/8" x 2" flat stock, 3/8" solid square or round • Includes 7 different round dies; (1" to 3" in diameter) for making different radius curved bends (u-bolts, clamps etc) • Depth control rod for quick bend replication • Designed for portability; can be mounted in any bench vise or attached to your own custom base using included brackets 99 8000447 – Wt. 20.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

BENCH GRINDERS & ACCESSORIES

S H O P

6" BENCH GRINDER • 1/2 HP • 120 volt • 3.3 amps • 3,400 RPM • Cast iron motor housing • Adjustable tool rests and eye shields • 3/4" wide grinding wheels 3410210 – Wt. 24.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

& G

5499

8" BENCH GRINDER Includes flexible light.

A R A G E

• 1/2 HP • 120 volt Includes one • 4.8 amps/2.8 no load amps coarse and one • 3,500 RPM fine stone. • 5/8" shaft • Adjustable tool rests and eye shields • 1" wide grinding wheels 99 3410069 – Wt. 35.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

6" HEAVY DUTY BENCH GRINDER • 1/2 HP • 120 volt • 5 amps • 3,450 RPM • Heavy duty cast iron motor housing • Complete with 1" grinding wheels 3400172 – Wt. 24.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

7999

8" HEAVY DUTY BENCH GRINDER • 3/4 HP • 120 volt • 8 amps • 3,450 RPM • Heavy duty cast iron motor housing • Complete with 1" grinding wheels 3400188 – Wt. 38.5 lbs. . . . . . . . . . . . . . . . . . . . . .

PEDESTAL STAND

• Can be used to mount bench grinders, vises, etc. • Cast iron construction • Top plate measures: 9-1/2" x 9-1/2" • O’all height: 33" 3410785 – Wt. 21.4 lbs. . . . . . . . . . .

14499 MOTOR ARBOR

• Use to attach grinding stones and wire wheels to motor shafts • Threaded shaft: 1/2" dia.

3999

FITS 1/2" MOTOR SHAFT 2944593 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . FITS 5/8" MOTOR SHAFT 2944601 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

549 599

177

S H O P

& G A R A G E

GRINDING WHEEL DRESSER

DRESSING STONE • 6" x 1" x 1" • Keeps grinding wheels smooth 3410061 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

699

6" cast iron handle. 3410745 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

GRINDING & WIRE WHEELS WIRE WHEELS

For use on bench grinders. A A B B C

Type Coarse Fine Heavy duty Heavy duty Knot-type

Size 6" 6" 6" 8" 6"

Arbor Max. RPM 5/8" 3,750 5/8" 3,750 1/2" & 5/8" 6,000 5/8" & 3/4" 4,500 7/8" 9,000

Wt. (lbs.) 0.6 0.6 1.2 1.1 1.4

ITEM 3410500 3410501 3410505 3410506 3410645

C PRICE 6.99 6.99 9.99 15.99 13.99

NYLON WHEEL BRUSHES • For bench grinders • 1/2" bore Dia. Arbor Hole 4" 1/2 - 5/8" 6" 1/2 - 5/8"

INDUSTRIAL WIRE WHEELS

Wt. (lbs.) 0.3 0.6

ITEM 3410882 3410621

PRICE 8.99 15.99

6" WIRE WHEEL

• For use on bench grinders • 5/8" arbor 6" DIA.

2999 99 . . . . . . . . . . . . . . . . . . . . . . . 44

3414265 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . 8" DIA.

3414273 – Wt. 2.6 lbs.

• Fine bristles • 1/2" bore • 1" wide 3410299 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2399

ABRASIVE BENCH GRINDER WHEELS Size 6" x 3/4"

Bore Wt. ITEM PRICE (lbs.) 1"* 1.9 3409034 15.99

A80 Aluminum Oxide GC80 Green Silicon Carbide Aluminum Oxide 1"* 2.0 3411121 29.99 8" x 1" A36 1" 4.4 3410175 28.99 * Complete with bushings for 7/8", 5/8", and 1/2" arbors. 6" x 1"

178

Grit

DRILL PRESS

S H O P

16-SPEED DRILL PRESSES See page 182 for drill press vices.

• Motor: 3/4 HP, rated at 6.6 amps • 16 speeds (210 to 3,340 RPM) • Chuck: 5/8" • Column dia.: 3" • Swing: 13" • 11-1/2" dia. round table • Removable safety switch • Spindle taper MT 2

& G

A R A G E

A) BENCH MODEL

O’all height: 38". 3462108 – Wt. 119.0 lbs. . . . . . . . . . . . . . . . . . . . .

22999

B) FLOOR MODEL

O’all height: 63". 3462090 – Wt. 133.8 lbs. . . . . . . . . . . . . . . . . . . .

29999

INDIVIDUAL SILVER and DEMING DRILL BITS

• 1/2" shank • Rockwell hardness: 62 Size Wt. (lbs.) 9/16" 0.3 5/8" 0.3 11/16" 0.4 3/4" 0.4 13/16" 0.4 7/8" 0.5 1" 0.6

DRILL PRESS CLAMP

• 9" locking clamp attaches to drill press table • 3" throat depth 2920682 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . ITEM 3410867 3410883 3410990 3411030 3411063 3411253 3411303

PRICE 5.99 6.99 7.99 8.99 10.99 12.99 14.99

HIGH SPEED CUTTING OIL

1499

SILVER and DEMING DRILL SETS

• 1/2" shank • Rockwell hardness: 62 • Includes wooden carrying case A) 5 PC SET

Sizes: 9/16", 5/8", 3/4", 7/8", and 1". 3400207 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

3999

8 PC SET

Sizes: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1". 99 3400215 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

NOT FOR USE AS A BANDSAW COOLANT!

B) TITANIUM COATED

• Heavy duty, sulfurized-chlorinated naphthenic base oil outperforms standard water or mineral based formulations • Provides extreme pressure lubrication and high temperature stability • Contains anti-weld and wetting agents • Ideal for broaching, milling, tapping, and drilling • 3.78 litre jug 99 6420084 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Dissipates heat quickly for a fast, smooth cut, and longer life. 5 PC SET

Sizes: 9/16", 5/8", 3/4", 7/8", and 1". 3410934 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4999

8 PC SET

Sizes: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8', 15/16", and 1". 99 3410935 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

179

S H O P

& G A R A G E

6 PC ROLLING BALL SET

• Max. cap.: 55 lbs./ball • Ball size: 5/8" dia. with mounting screws 8006882 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DRILL PRESS CHUCKS with KEY

1999

1/2" CAPACITY – JT-33 TAPER 3460034 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299 1999 199

5/8" CAPACITY – JT-33 TAPER 3460035 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . KEY – FOR 5/8" CHUCK 3460073 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

COOLING/LUBRICATING NOZZLE

12" BENCH MOUNT ROLLER • Ideal for cooling and lubricating during the machining process • Magnetic base mounts on any metal surface • Adjustable to direct air or coolant at working area • Barbed inlet fits 1/4" I.D. hose • Prolongs cutter life 99 0430025 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

DRILL PRESS ROLLER STAND

2" x 11-3/4" roller. 8003466 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

ADJUSTABLE MOBILE BASES

• Two 10" rollers • Roller adjustment: 9" vertical, from 12-1/2" to 51" horizontal • Attaches directly to drill press column from 2-1/2" to 4" dia. • 3" x 10" tool tray 99 8039026 – Wt. 12.4 lbs.. . . . . . . . . . . . . . . . . . . . . . . .

• Max cap.: 1,200 lbs. • 2 solid and 2 swivel casters with brake system • Mount machinery and equipment on a stable and mobile platform 10" x 14" to 17" x 21-1/2" 8039053 – Wt. 34.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . 14-3/8" x 19-1/8" to 23-1/4" x 26-3/4" 8039071 – Wt. 40.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

6999 7999

ROLLER STANDS

ANGLED

A) ADJUSTABLE ROLLER STAND

• Max. cap. 100 lbs. • Ideal for use with pipe or other round stock • Dual rollers are 6" x 1-3/8" each • Height adjusts from 28" to 49" 8049202 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

180

1999

B) FOLDING ROLLER STAND

C) MULTIDIRECTIONAL ROLLER STAND

• Max. cap.: 130 lbs. • 2" x 11-5/8" polished steel roller • Height adjusts from 27-1/2" to 43" • Folds flat for easy storage 8044653 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Roller: 2" x 17" • Height adjusts from 24" to 40" • Flat roller quickly changes to ball roller track 3460066 – Wt. 11.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2999

4999

ANVILS & VISES

ANVILS

4" VISE with SWIVEL BASE and ANVIL A

B O’all dim. A

9"L x 2"W x 4"H

B 11-1/4"L x 3-3/4"W x 6"H C 15-1/4"L x 7"W x 6-3/4"H

C Wt. ITEM PRICE (lbs.) 7.8 3460045 10.99 26.1 3460028 29.99 76.2 3430061 99.99

3430063 – Wt. 28.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

3999

GENERAL PURPOSE FIXED BASE VISES with ANVIL

4" VISE JAW PADS

• Rubber pads for protecting delicate parts • Works great for holding irregular shapes • Magnetized to stay in place 3430041 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1699

Size 4" 5" 6" 10"

Wt. (lbs.) 20.3 32.0 50.5 137.0

ITEM 3430021 3430023 3430024 3430046

PRICE 42.99 54.99 69.99 199.99

H O P

& G A R A G E

FIXED BASE VISES Lifetime Warranty!

Nodular ductile cast iron has superior resistance to impact, flexing, and heat, resulting in a vise that is lighter but at the same time stronger than other brands of vises. Jaw Size Max. Jaw Wt. (lbs.) Opening 4" 5" 6" 8"

5-3/4" 7-5/16" 8-7/8" 10"

16.0 25.2 32.2 43.0

ITEM

PRICE

8035137 8035146 8035155 8035164

59.99 99.99 129.99 169.99

Schulz's history dates back to 1963 when the company began as a small foundry. Today, their industrial park has over 15 acres of production area containing state of the art technology and equipment. Schulz is certified by TUV-ISO 9001. Independent laboratory tests have shown that the nodular ductile cast iron in the Schulz vise significantly outperforms standard cast iron found in most other vises.

2-WAY MULTI-PURPOSE VISES

TABLE VISE

• Jaws swivel 360° and lock in any position • Mounting base swivels and locks in any position • Anvil on vise body Width Mechanic's Pipe Jaw Wt. ITEM PRICE Jaws Max. Max. Opening Opening 4" 4" 3-1/2" 23.8 3430047 64.99 5" 5" 4-1/2" 46.4 3430049 84.99

• Swivel vise can be attached to a table or bench with built-in clamp • Jaw width: 2-3/8" • Jaw opening: 2-3/4" 3460030 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1799

181

S H O P

& G A R A G E

ANGLE VISES • Adjust from 0° to 80° • For use with drill press, milling machines, and work benches • Grooved steel jaws hold round or tapered pieces

Size 2-1/2" 3-1/2"

Wt. (lbs.) 7.1 11.0

ITEM 3432010 3431863

PRICE 22.99 24.99

2-WAY CROSS SLIDE VISES • Use with milling machines or drill presses • Hardened jaws and machined handles • Object clamped in the vise can be easily moved in two directions Size Depth Width Jaw Overall Long. Cross Wt. ITEM of Jaws of Jaws Opening Depth Travel Travel (lbs.) 3" 1-1/16" 3-1/4" 3" 4-1/2" 3-1/4" 3-1/4" 12.9 3431640 4" 1-3/8" 4" 4" 5-1/4" 4" 4" 17.4 3431657 6" 1-9/16" 6" 6" 6-1/8" 6" 6" 35.7 3431780

PRICE 44.99 49.99 84.99

DRILL PRESS VISES Will also fit standard power tool tables and bases. Features: • Hardened jaws • Flanged base • Smooth operating screw and sturdy construction Size Jaw Width Max. Jaw Opening Base Length Base Width 2" 2-1/2" 2-1/4" 5-1/4" 5-1/4" 3" 3" 2-3/4" 6-3/4" 5-3/4" 4" 4" 3-5/8" 7-1/2" 6-1/2" 5" 5" 5-1/4" 9-3/4" 8" 6" 6" 5-3/4" 10-3/8" 8-3/4"

GASKET MAKERS & SEALANTS GASKET MAKERS

Wt. (lbs.) 2.9 4.4 5.7 9.1 12.0

ITEM 3431814 3430204 3430212 3430220 3430238

PRICE 12.99 14.99 18.99 24.99 29.99

For nearly 100 years, Permatex has supplied innovative products for automotive enthusiasts, professionals, and OEMs. ULTRA BLACK

• Approved by Ford and GM • 95 grams 6400002 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

699

ULTRA COPPER

• Designed for high operating temp. applications • 85 grams 99 6400004 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

ULTRA RED ULTRA BLUE

• Designed for the gasketing requirements of today’s cars • Sensor-Safe 85 grams. 6400071 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 300 ml tube. 6400089 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

699 1599

• The original high temp. “red” gasket maker • 85 grams 6400030 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

499

BLUE RTV

• The original blue gasket maker designed for use on pre 1980 engines • 85 grams 99 6400006 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

FLOWABLE SILICONE GLASS and WINDSHIELD SEALER

182

• Specially formulated to flow into hard-to-reach or hidden areas and seal, bond, insulate, or caulk • Flexible, durable, tough, waterproof • Temp. range: -60°C to 260°C (-80°F to 450°F) • 42 g tube 99 6400097 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

THREAD LOCKERS

PIPE THREAD SEALANT

• General purpose threadlocker for fasteners 1/4" or larger • Removable with hand tools and normal effort • 6 ml tube 99 6440007 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

PERMANENT STRENGTH THREAD LOCKER RED

• Extra effort and localized heat may be required for removal • Withstands heavy shock and vibration • 6 ml tube 99 6440127 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HIGH TEMP/HIGH STRENGTH THREAD LOCKER RED

• Extra effort and localized heat may be required for removal • High temperature permanent thread locker • 10 ml tube 99 6440008 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

SILICONE RESIDUE STRIPPER

REMOVABLE STRENGTH THREAD LOCKER BLUE

A) PST 592 HIGH PERFORMANCE PIPE SEALANT with TEFLON

50 ml tube. 6400048 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

B) THREAD SEALANT with TEFLON

Adjustable up to 24 hours after application without seal damage 118 ml jar 99 6400055 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

GASKET SEALANT NO. 1 SEALANT

• Designed for dressing/sealing cut gaskets on rigid flanges • Thick, fast drying and hardening formula • 80 ml tube 6400008 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

NO. 2 SEALANT (SHOWN)

• Slow drying, non-hardening formula • 80 ml tube 6400009 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• OEM approved and recommended • Save parts from excessive grinding and damage • Wipe away silicone residue • 56.7 g tube 99 8000081 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

COLD WELD BONDING COMPOUND

H O P

& G A R A G E

499

SUPERBONDER ADHESIVE 3 ml TUBE

• Superior performance industrial strength general purpose super glue • Fast setting, strong adhesive for bonding most materials 6440119 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

NAVAL JELLY

• Fast setting 2-part adhesive and filler system • Use as an alternative to welding or brazing cracked or broken metal parts • Can be drilled, machined, filed and painted • Withstands temperatures to 174°C (350°F) 6440010 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

749

• Popular rust dissolver • Brush or spray on to remove years of accumulated rust • Provides flash rust protection • 237 ml 6490007 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

399

ANTI-SEIZE COMPOUND • For easy assembly and disassembly of metal parts, even parts exposed to high temperatures • Prevents rusting, cold welding, and galvanic corrosion between assembled parts • Temp. range: -54C to 870°C (-65F to 1,600°F) • 454 g brush top tin 99 6440143 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

183

S H O P

& G A R A G E

SILICONE SEALANTS

A C

• Low odour oxime silicone contains chalk which absorbs surface impurities to create a better seal • Resists oil, water, anti-freeze, grease and transmission fluid • Sensor safe, low odour, non-corrosive and manufactured to exceed OEM specifications • Use on valve covers, transmission pans, oil pans exhaust manifolds, thermostat housings, etc. A) DYNA BLACK SEALANT

Good for up to 329°C (625°F) 8004811 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

549

B) DYNA COPPER SEALANT

Good to 371°C (700°F) – great for hotter running, late model vehicles 49 8004820 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) DYNA BLUE SEALANT

Good for up to 260°C (500°F) 8004839 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

549

ANTI-SEIZE COMPOUND • Prevents galling, seizing, and rusting • Chemical and water resistant • 8 oz. 8004857 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BOLT LOCKERS • Works in temperatures from: -128°C to 1,093°C (-200°F to 2,000°F) • Resists most fluids and protects against thread corrosion • 6 ml bottle

• Repairs iron, steel, aluminum, brass, copper, plastic, and fibreglass • Can be drilled, tapped, threaded, sanded, filed, and painted • Will not shrink, rust, or corrode • Water and oil proof • Unaffected by most acids and solvents 99 8004900 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

GAS TANK REPAIR KIT

D) MEDIUM STRENGTH BLUE BOLT LOCKER

Fills gaps up to 0.006" and can be removed without special tools. 99 6440027 – Wt. 0.1 lbs. . . . . . . . . . .

E) HIGH STRENGTH RED BOLT LOCKER

Fills gaps up to 0.008" and will require extra effort for removal. 6440026 – Wt. 0.1 lbs. . . . . . . . . . .

QUICK WELD COMPOUND

899

499

BRUSH ON ELECTRICAL TAPE • Seals out moisture and dirt • Eliminates corrosion • Will not crack or unravel like tape 8004866 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

649

• Seals cracks and holes without removal of tank • Sticks to metal that is wet with gasoline • Works at up to 107°C (225°F) 99 8004884 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

GASKET MATERIAL

TECH-STEEL

• Oil resistant; suitable for valve covers, carburetors, drain pans, etc. • Can also be used on lawn and garden equipment, snowmobiles, ATVs, and other small engines or where oil, fuel, and antifreeze resistance is needed

184

1/16" x 2 ft. x 3 ft. ROLL 8019636 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . 1/8" x 2 ft. x 3 ft. ROLL 8019645 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1499 2199

• Reinforced epoxy putty bonds to cast iron, ABS, bronze, concrete, and more • Steel hard in 15 minutes • Full cure in 1 hour • 2 oz. 99 6440018 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

At your request PRINCESS AUTO will supply a M.S.D.S. (Material Safety Data Sheet) with your chemical purchases.

AUTOMOTIVE CHEMICALS

B) RUBBERIZED UNDER COATING

• Paintable • Superior rust and corrosion protection • Muffles road noise • 454 g 6450004 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

C) INSTANT STARTING FLUID

D) CARB MEDIC CARB CLEANER

A) BRAKE PARTS CLEANER

• Special formulation quickly dissolves and removes brake fluid, oil, grease, and other contaminants from brake linings, drums, and other brake parts • Contains no CFCs • 510 g 49 6420083 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

OILS & LUBRICANTS

• Cleans PCV valves, automatic chokes, and carbs • 354 g 29 8006294 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

E) ENGINE DEGREASER SOLVENT

454 g. 8005026 – Wt 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

METHYL HYDRATE

FLUID FILM • Superior lubricant, rust corrosion protection, and long term penetrant • Eats through rust to base metal • Protects against corrosion caused by salt, calcium-chloride, fertilizers, herbicides, and pesticides • Makes excellent undercoating 333 g SPRAY CAN 6420392 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 3.79 litre JUG 8013339 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

INDUSTRIAL CHEMICALS

• Can be used to start both diesel and gas engines • Effective to -44°C (-47°F) • Prolongs battery and starter life • Contains upper cylinder lubricant and corrosion inhibitor • 210 g 99 6420076 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1299 7499

H O P

& G A R A G E

• Excellent gas line anti-freeze, fuel for unpressurized alcohol stoves, prestarter for catalytic heaters, solvent for gums, resins and rubber cement, cleaner, and thinner for shellac • 500 ml 49 6480002 – Wt. 1.0 lbs. . . . . . . . . . . .

Lloyds

F) MOOVIT HI-PERFORMANCE PENETRATING LUBRICANT

• Effective from -40°C to 260°C (-40°F to 500°F) • Compatible with vinyl, rubber, and plastic • Lock lubricant will not evaporate • Displaces moisture permanently • 350 g spray can • Can be used as: air tool lubricant, threading or tapping oil, chain and open gear lube, corrosion inhibitor, white grease 49 6420008 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) LOOBIT™

• Multi-purpose, heavy duty lubricant formulated for use on roller drive chains, wire rope and cables, internal control cables, open gears, exposed bearings, load bearings, load bearing hinges and pivot points, mechanical controls, and more • Leaves a clear protective film impervious to moisture, salt water, most chemicals and gases • 350 g spray can 49 6420014 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H) AD3000 CORROSION BARRIER FILM

• Helps protect vehicle door panels, hood and trunk lids, under carriage, frames, suspension components, machinery, and tools from condensation and salt spray • 350 g spray can 49 6420013 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

I) AD2000 CORROSION INHIBITOR

• Lubricant prevents and deactivates corrosion on metals, alloys, plastic and rubber • Lubricates to extra fine tolerance and penetrates to leave a clean, non-sticky, moisture repelling residue • 350 g spray can 99 6420010 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

185

S H O P

& G A R A G E

3-IN-1 SPRAYS A) PENETRANT SPRAY

• 311g can professional • Use on pipes, fittings, locks, chains, nuts and bolts or anything else that needs loosening • Helps prevent rust and corrosion 49 8003446 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

B) SILICONE SPRAY

• 311g can • Use on metal and non-metal surfaces including wood, rubber and vinyl • Stops squeaks, eliminates sticking, waterproofs and prevents rust and corrosion • Lubricates doors, locks, hinges, drawers, latches, zippers, linkages and more • Protects items such as golf equipment, boots, skates, lawn equipment, tools and electrical parts such as distributors, ignition wires, and spark plugs • Narrow spray pattern for an even, no-mess application 99 8003463 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRIC MOTOR OIL

C) WHITE LITHIUM GREASE

• 290g can • Provides long-lasting lubrication for all metal-tometal applications • Will not splatter, run, melt, freeze or wash off • Applications include: roller channels, bearings, gears, tools, sliding doors, windows, garage door tracks, hinges, locks, latches, auto seat tracks, trailer rollers, winches, turnbuckles, etc 99 8003464 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WD-40 3-IN-ONE ®

3-IN-ONE

professional

• Special blend for 1/4 HP motors or larger • SAE 20 • 3 fluid oz. 6410001 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

299

SUPER LUBE

D) APPLICATOR

• SAE 10 • Telescoping, flexible spout • 4 oz. 6410027 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

349

E) SPRAY CAN

• Multi-purpose lubricant with teflon in a small squeeze tube with a needle tip for greasing in tight areas • Contains no petroleum distillates • Withstands extreme temperatures • Impervious to salt water • Measures 5" long 3881471 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

11 oz. 6420152 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

349

F) SPRAY BOTTLE

WHMIS information for WD-40 is right on the bottle. 6420210 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

G) BULK REFILL

399

3.78 litres. 6420145 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

SHOP CLEANUP SHOP TOWELS

186

• Heavy duty lint free cotton • Size: 14-1/2" x 15" • For polishing, paint clean-up, general shop,and household use • Pkg. of 50 3890581 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . .

COTTON WIPES

/pkg.

• 10 lb. bag • Near white fleece cotton material 3890892 – Wt. 10.2 lbs. . . . . . . . . . . . . . . . . . . . . .

999 /pkg

LAVA BAR HAND CLEANER

ULTRASORB ALL PURPOSE ABSORBENT

• Good for dirt, grease, oil, paint, ink, and adhesives • Heavy duty brand cleaner with moisturizers 8040835 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

• Absorbs oil, grease, water, coolant, and more • Made of 100% diatomaceous earth • Can also be used as an animal litter, potting soil, traction aid, and odour control material 6490011 – Wt. 33.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H O P

249

1299

DRY HAND CLEANER

& G

• Does not contain substances or chemicals that are harsh on you, your shop, your plumbing, or the environment • No soap, plastics, phosphates, solvents, pumice, borax, or alkali • Cleans the toughest grease and grime from your hands while it conditions them A) 184 g SHAKER 6420023 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 2.05 kg TUB 6420025 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

699 4299

100% BIODEGRADABLE

HAND CLEANERS C) NATURAL ORANGE PUMICE CLEANER

• 414 ml and 3.78 litre sizes come with bonus hand and nail brush • Cleans adhesive, asphalt, carbon, cement, grease, paint, ink, putty, shellac, tar, stains, and much more • Contains soothing oil, aloe, and lanolin with a fresh citrus scent Size Wt. (lbs.) ITEM PRICE 414 ml 1.1 6420285 3.99 1.89 litre 4.7 6420293 12.99 3.78 litre 8.0 6420368 18.99

A R A G E

D) ORIGINAL GOJO® FORMULA

• Cleans with or without water • Fortified with lanolin 510 g

349 99 6420269 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 12 6420251 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

2.0 kg

F) HEAVY DUTY LEMON FORMULA

• Cleans with or without water • Non-toxic, fortified with vitamin E, lanolin, and aloe • Cleans adhesive, carbon, graphite, tar, and more • Fresh lemon scent 99 8001916 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) HAND TOWELS

• 25 pre-moistened 7" x 9" sheets • Durable high strength towels • Convenient and portable re-sealable container • Removes grease, grime, oil, and ink 8001933 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

AROMASK ODOUR NEUTRALIZERS • Designed to neutralize odours • Industrial strength • !00% biodegradable G) AROMASK SPRAY

125 ml spray bottle. 8017594 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799 G

H) AROMASK GEL PACK

• Place in drawers, closets, automobiles, smoke and water damaged areas to remove odour • 250 ml 99 8017601 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I) AROMASK LIQUID

• Add to cleaning solution when cleaning • Use to refill 8017594 or recharge 8017601 • 475 ml 8017585 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

187

SPACE HEATERS

S H O P

Watch for our our line of Vista LE AB ER and Mr. Heater products! L I Appearing in all our stores A AV TEMB nationwide and by mail order P 04! this September! E S 20

4,800 WATT CONSTRUCTION HEATER

TANK TOP HEATER

& G

• 16,400 BTU • 240 volt, 4,800 watts • 6 ft. grounded 30 amp cord • Adjustable thermostat with safety cutout • O’all dim.: 11-3/8"H x 10-1/2"W x 7-1/4"D 8001017 – Wt. 13.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

A R A G E

PLUG RECEPTACLE FOR #8001017

250V, 3-wire grounding surface receptacle. 0705012 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

7499 1099

• 8,000, 12,000, and 14,000 BTU regulator control • Heater shuts off automatically with loss of flame • Mounts directly to a propane tank (not included) • Up to 52 hours on 20-lb tank 8007137 – Wt. 6.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

5999

4,000 to 9,000 BTU PORTABLE PROPANE HEATER ®

• Heats up to 200 square feet • Automatic “low-oxygen” shut off system and “accidental tip over” protection • Uses 1 lb. (3 to 6 hours of use) or 20 lb. (48 to 110 hours of use) propane cylinder with optional hose connection (available through our Accessory Program) • Free standing or wall mount • Quiet, odour-free, and lightweight 99 8007152 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

149

CONVECTION PROPANE HEATERS

• No electricity required • Standing pilot with piezo push button ignitor for safety • 10 ft. hose and POL fitting included A) 30,000 TO 80,000 BTU VARIABLE OUTPUT

• Heats approximately 1,900 square feet for up to 14 hours on a 20 lb. propane tank • 1.4 to 3.7 lbs/hour fuel consumption 99 8000985 – Wt. 19.8 lbs. . . . . . . . . . . . . . . . . . . . .

154

B) 75,000 TO 200,000 BTU VARIABLE OUTPUT

• Heats approximately 4,700 square feet for up to 29 hours on a 100 lb. propane tank • 3.5 to 9.3 lbs/hr fuel consumption 99 8000988 – 21.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

169

RADIANT PROPANE HEATERS ®

• No electricity required • Piezo push-button ignition • Heater shuts off with loss of flame or tips over • Folding handle and transport wheels • Includes 12 foot hose and regulator C) 35,000 BTU

Heats up to 800 square feet for up to 12 hours on a 20 lb. propane tank (not included). 99 8007150 – Wt. 25.0 lbs. . . . . . . . . . . . . . . . . . . . . .

179

D) 125,000 BTU 360° DIRECTIONAL HEAT

188

Heats up to 3,000 square feet for up to 17 hours on a 100 lb. propane tank (not included). 99 8007151 – Wt. 42.0 lbs. . . . . . . . . . . . . . . . . . . . . .

299

FORCED AIR PROPANE HEATERS

• Heater shuts off with loss of flame or power supply • 10 ft. hose and regulator included

H O P

A) 35,000 BTU

• Heats up to 800 sq. ft. • Operates up to 13 hours on a 20 lb. propane tank (not included) • Piezo push-button ignition 99 8007138 – Wt. 17.0 lbs. . . . . . . . . . . . . . . . . . . . . .

169

A) 30,000 to 55,000 BTU

• Heats up to 1,250 sq. ft. • Operates from 14 to 8 hours on a 20 lb. propane tank (not included) • Continuous ignition 99 8007139 – Wt. 19.0 lbs. . . . . . . . . . . . . . . . . . . . . .

219

B) 75,000 to 125,000 BTU

• Heats up to 3,000 sq. feet • Operates from 28 to 17 hours on a 100 lb. propane tank (not included) • Continuous ignition 99 8007141 – Wt. 23.0 lbs. . . . . . . . . . . . . . . . . . . . . .

289

B) 125,000 TO 170,000 BTU

• Heats up to 4,000 sq. feet • Operates from 17 to 12-1/2 hours on a 100 lb. propane tank (not included) • Built-in thermostat • Solid State ignition 8007142 – Wt. 32.0 lbs. . . . . . . . . . . . . . . . . . . . . .

399

FORCED AIR KEROSENE HEATERS

• Heater shuts off with loss of flame or power supply • Continuous ignition • Equipped with lighted on/off switch, air pressure gauge, and fuel gauge (with the exception of 8007143)

& G A R A G E

C) 50,000 BTU

• Heats up to 1,200 sq. ft. • 4 gallon tank fuels for up to 11 hours 8007143 – Wt. 36.0 lbs. . . . . . . . . . . . . . . . . . . . . .

26999

D) 75,000 BTU

• Heats up to 1,750 sq. ft. • 6 gallon tank fuels for up to 11 hours 8007144 – Wt. 36.0 lbs. . . . . . . . . . . . . . . . . . . . . .

31999

E) 125,000 BTU

• Heats up to 3,000 sq. ft. • 14 gallon tank fuels for up to 14-1/2 hours • Equipped with cord wrap and solid rubber wheels 8007145 – Wt. 69.0 lbs. . . . . . . . . . . . . . . . . . . . . .

43999

E) 175,000 BTU

• Heats up to 4,250 sq. ft. • 14 gallon tank fuels for up to 10-3/4 hours • Equipped with cord wrap and solid rubber wheels 8007147 – Wt. 76.0 lbs. . . . . . . . . . . . . . . . . . . . . .

KEROSENE

499

99 HOW MUCH HEAT DO I NEED?

The following formula can be used to help determine the size of heater you may require. This formula is based on BTU (British Thermal Units) required to increase the heat in a standard uninsulated wood structure. Volume of Area x Temperature Increase x Multiplier = BTU's per hour

Sorry, cannot be shipped.

10 litres. 6480123 – Wt. 18.0 lbs. . . . .

1499

Multiplier is .2394 for Celsius temperatures, .133 for Fahrenheit. Example: Concrete block building 20 ft. wide x 40 ft. long x 15 ft. ceiling. The outside temperature is -25°C and you want the inside temperature to be +20°C. Volume of Area: 20 ft. W x 40 ft. L x 15 ft. H = 12,000 cu. ft. Temperature Increase: difference between +20°C and -25°C = 45 Therefore, the requirement of heat to produce this desired result is: 12,000 x 45 x .2394 = 127,276 BTUs per hour

189

S H O P

A R A G E

Forced air heaters use an electric fan to pull in cold air, and force out the hot air. Ideal for heating large areas and are available in either propane or liquid kerosene fueled models.

RADIANT

Radiant heaters heat the object the heater is facing, rather than the air surrounding it.

HEATER TYPES

& G

FORCED AIR

Convection source heating, can circulate air without an electric fan. Cool air flows through bottom, hot air flows out of the top creating inflow/outflow. Efficient for small areas.

CONVECTION KEROSENE

• Self-contained fuel source - best portability • Fuel maintains full BTU content down to -29°C (-20°F) • Best fuel choice for outdoor jobs such as; brick/block laying, mud work and framing

PROPANE

• Clean burning • Best fuel choice for indoor jobs such as; drywalling, flooring, curing concrete and mechanical work

LIGHT UP ATC FUSE KITS

• Fuses light up when blown • Fuse puller included

WIRELESS REMOTE KIT

12 PC KIT

Includes two 5 amp, two 10 amp, three 15 amp, four 20 amp, three 35 amp, and two 30 amp ATC fuses. 43 PC KIT

Includes seven of each ATC fuse: 5 amp, 10 amp, 15 amp, 20 amp, 25 amp, and 30 amp. 99 8005148 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

1/2 TON TROLLEY

190

• Works with any 12 VDC system • 4 independant channels for multiple accessories • Remote control activation of fog, driving and other lights, power accesories such as doors, windows and locks, or any other 12V powered accessory • 180 ft. max. range 99 8003441 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

• Adjustable to fit 2-1/2" to 4-7/8" beam widths • Ideal for shop, garage, farm and home use 99 8004772 – Wt. 16.5 lbs. . . . . . . . . . . . . . . . . . . . . .

TALON GRIP FINGERLESS GLOVES

• Fingerless thumb, 1st & 2nd finger for maximum tacticity and grip • With finger pulls for easy removal • Synthetic suede leather is washable • Large 99 8006866 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

MECHANICS GLOVES

WRENCH RADIATOR CAP

• Safely removes radiator cap • Snaps over rad cap to hold it firmly 8003370 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Reinforced fingertips and thumb for longer wear • Close fit provides excellent dexterity and comfort • Synthetic suede leather is machine washable • Assorted colours MEDIUM

A N D

799

7 PC OXYGEN SOCKET SET

1499 99 . . . . . . . . . . . . . . . . . . . . . . . . 14

O O L S

8006872 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . LARGE

8006875 – Wt. 0.1 lbs.

Includes injector socket, 2 oxygen sensors, and 2 vacuum switch sockets, oil sensor socket, and offset oxygen sensor wrench. 99 8003679 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

VALVE SPRING COMPRESSOR

12-1/2" formed steel. 8003658 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

8 PC BRAKE TOOL SET

399

2 PC LOCKING WHEEL NUT REMOVER

• 1/2" drive • 2 socket sizes fit most locking wheel nuts • Removes damaged and stripped wheel nuts • Deep internal reverse threads • For use with impact wrench 8003682 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

Set includes spring compressor, brake spring installer, spring removal tool, brake retaining spring tool, brake spring pliers, 2 brake adjustment spoons, and mini brake adjustment tool. 99 8003338 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CV BOOT INSTALLER SET

COOLING SYSTEM TEST KIT

• Steel arm with zinc plating • Insert trim with lubricant oil 8003791 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Pump with cap adapter, flex tube and 30 PSI pressure gauge • 2 adapters • Accurately test higher pressure caps and cooling systems • Can be used on most import and domestic cars, light trucks and vans 99 8003312 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

4999

169

191

VISCOUS FAN HOLDING TOOL

A N D

• Unique swivel locking head for universal operation • Prevents fan hub from rotating when removing retaining nut 99 8003801 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

CYLINDER LEAKAGE TEST KIT CIRCUIT TESTER

T O O L S

• Helps to pinpoint causes of low compression • Gauge reads 0 to 300 PSI • Includes crankshaft support assembly and 3 adapters: 2-1/2", 10-3/8", and 15" flex tube 8004372 – Wt. 7.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9999

• Retractable extra long probe reaches hard to access circuits • Checks all 6 and 12 volt systems • 12 ft. coiled cord 99 8003317 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

14 PC 90° OFFSET FEELER GAUGE SET

500 AMP CARBON BATTERY TESTER

• Includes sizes: 0.008", 0.011", 0.012", 0.013", 0.014", 0.016", 0.017", 0.018", 0.020", 0.023", 0.024", 0.025", 0.027", and 0.029" • Stainless steel • 90° offset 8003349 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 500 amp load carbon pile tests 12V batteries, alternators, regulators and starters • Tests batteries up to160 amp-hrs./1,000 cranking amps • Colour-coded separate voltmeter and ammeter • Colour-coded temperature compensation pass/fail chart 99 8002827 – Wt. 9.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999

4 IN 1 PULLER SET

199

PULLER SET BLIND HOLE BEARING • Reversible jaws assemble into 2- or 3-jaw pullers • Standard jaw max. reach: 5", max. spread: 10-1/2" • Long jaw max. reach: 8-3/4", max. spread: 11" • 7 ton capacity easily handles larger gears, bearings, pulleys, wheels, sprockets, and other press-fit parts 99 8004346 – Wt. 12.8 lbs. . . . . . . . . . . . . . . . . . . . . .

124

• For pulling jobs requiring an internal pull • 5 lb. slide hammer with T-handle • 4 collets are heavy duty chrome moly steel • Collet sizes: 10-14 mm, 15-19 mm, 18-25 mm, 25-32 mm 8003316 – Wt. 7.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

FRONT END SERVICE SET

14999

MINI MULTIPURPOSE LITHIUM GREASE

192

3 oz. 8007270 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

• Removes most pitman arms, tie rod ends, and ball joints • Drop forged steel with heat treatment 99 8003685 – Wt. 11.6 lbs. . . . . . . . . . . . . . . . . . . . . .

119

3 PC OIL PUMP PRIMER SET

• Primes rebuilt or not recently used engines • Protects from damage due to running dry • Includes primers for GM V6-V8, Ford 1/4" hex drive, and Ford 5/16" hex drive 99 8003678 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A N D

OIL PAN SEPARATOR TOOL

QUICK CHANGE BIT HOLDERS • Wide tapered round blades wedge between metal surfaces to break gasket seals on engine sumps, transmissions, or any difficult gasket joint that needs separating • Blade width: 1/78", length: 3-1/8" 8003793 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

• Clean plastic tubing with aluminum tube inside • Magnetic 3-1/8" LENGTH 8003788 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3/4" LENGTH 8003786 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

HEAVY DUTY SLIDE HAMMER

O O L S

299 299

DRILL CLUTCH SET

• Freewheels until pressure is placed on bit • Eight 1/4" drive sockets: 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 15/32" and socket holder • 5 bits: Phillips #1 and #2, slotted 7/32" and 9/32", and extended length Phillips #2 99 8003798 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Used to remove dowel pins from cylinder blocks, crank shafts, and any place dowel pins are used • Collet sizes: 6, 8, 10, 12, 14, and 16 mm 99 8003784 – Wt. 7.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

119

7 PC 1/4" HEX IMPACT DRIVER SET

PRO TOOL SETS • Contains 1/4" dr. hex impact driver, three 50 mm bits: Phillips #1 and #2, slotted 3/16", one 75 mm Phillips #2 bit, and two1/4" dr. hex nut driver heads • All adapter pieces are high quality chrome vanadium steel 99 8003577 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

23 PC SET

Includes 5 E torx (E4 to E8), 3 double square sockets (1/4", 5/16", 3/8"), 8 tamper resistant Torx bits (T-8 to T-40), 4 Phillips bits (#0 to #3), 6" spinner handle, stubby ratchet handle (48 teeth), and metal storage case. 99 8004433 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DOUBLE-END POWER BIT SET

19 PC SET

Includes 4 E torx (E10 to E16), 8 tamper resistant Torx bits (T-8 to T-40), 4 Phillips bits (#0 to #3), 3" spinner handle, magnetic coupler, stubby ratchet handle (48 teeth), and metal storage case 99 8004434 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• S2 steel • 10 Phillips bits: #2 x #2 8003731 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

193

10 PC UNIVERSAL LOCKING TOOL SET

A N D 10" VISE GRIP SOFT GRIP LOCKING PLIERS

• 9-1/2" plier with chrome moly steel jaws • 2 PVC protectors • 7 changeable jaws suitable for installing, removing, and tightening objects 99 8003738 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

• Non-slip cushioned handle reduces vibration and handle fatigue, increases comfort and leverage • Curved jaw with wire cutter 99 8003122 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

STRAIGHT TIP LOCKING RING PLIERS

PARALLEL JAW LOCK RING PLIER Features heavy drop forged tips with wider opening for standard transmissions. 99 8004400 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• External action lock ring pliers feature compound leverage action • Thin jaws are notched to securely hold snap rings and are ideal for automatic transmissions • Spread 3/4", for 1-1/16" lock rings 99 8003579 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ANGLE TIP LOCKING RING PLIERS

ADJUSTABLE EXTENSION BAR

Features heavy drop forged tips with wider opening for standard transmissions. 99 8004403 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9 PC NUT DRIVER SETS • 3 drive sizes (1/4", 3/8", 1/2") in 1 convenient tool • 3/8" handle extends from 10" to 16" • Foldable T-handle for easy storage • Chrome vanadium steel 99 8005150 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ADJUSTABLE SPANNER

Chrome Vanadium steel. SAE

3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2". 99 8004532 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

194

• Ideal for adjusting pillow block bearings • Adjustable from 1/2" to 2-3/4" 8003795 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

METRIC

1999

• 4, 5, 5.5, 7, 8, 9, 10, 11, and 12 mm 8004449 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

9-1/2" HEAVY DUTY HOSE CUTTER

• Large 2" cutting capacity • Heat treated carbon steel blade 8004406 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

18" HEAVY DUTY OFFSET PIPE WRENCH

Offset wrench for unique pipe fitting situations 8003748 – Wt. 5.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A N D 18" 3 IN 1 CABLE/WIRE/BOLT CUTTER

1999

18" CABLE CUTTER

• Chrome moly blades • Cutting capacity: 8 mm bolt, 5 mm wire, 10 mm cable 99 8003314 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 IN 1 CUTTER BOLT/WIRE/CABLE

8003749 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

3499 • Cuts 3 mm soft steel bolts, 2 mm wire, and 5 mm cable • Chrome moly blades 8003311 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9" BULLDOG SNIPS

1499

METAL BROOM HANDLE

• 1" chrome moly serrated blades provide stability and prevent slipping • Cuts up to 1.62 mm cold rolled steel or 1.21 mm stainless steel • Non-slip Soft Touch® handles 99 8004462 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

17 PC PUNCH and CHISEL SET

• Epoxy coated metal handle is durable and lightweight • Threaded hex tip 8005128 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

349

BENT SLIDING HAMMER PRY BAR

• 24" chrome vanadium steel bar • 2 lb. hammer 8003428 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

STRAIGHT SLIDING HAMMER PRY BAR • Chrome moly steel with mirror finish • Includes: 2 centre punches # 1, 2, 5 taper punches 2, 3, 4, 5, 6 mm, 6 pin punches 2, 3, 4, 5, 6, 8 mm, 2 flat cold chisels 12, 18 mm, 2 cape chisels 5, and 7 mm, and steel rack 99 8004440 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 24" chrome vanadium steel bar • 2 lb. hammer 8004398 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

195

4 PC PRY BAR SET

A N D

• Comfort grip handles • 8", 12", 18" and 24". 8004720 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

RARE EARTH MAGNETS

26" LEVELING RULER

T O O L S

2499

• 18 mm dia. x 3mm • Extremely strong and resistant to demagnetization A) 3 PAK

8003848 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

HANDY HOOK

499/pkg. MAGNETS B) 10 PAK 99 8006749 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 4 /pkg. 8006747 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

LEATHER PUNCH • Lifts up to 20 lbs. • Ideal for hanging keys, tools, shop lights, etc. 8006832 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

DELUXE WINDOW SCRAPER 2, 2.5, 5 ,3 ,3.5, 4, 4.5, and 5 mm dia. steel die. 8003688 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

TWO POSITION CUTTER • Stainless steel head and blade • Includes plastic blade cap 8004348 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . • SK5 blade with quick change function • Ergonomic design 8004472 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

4 PC STUD REMOVERS

22 PC SCREW EXTRACTOR SET

METRIC

196

• Fluted extractors provide solid grip on broken studs and screws • 3/16" to 9/16" • Special design ensures a positive grip on stripped screw heads without expanding the screw 99 8003656 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 3/8" drive: 6 mm and 8 mm • 1/2" drive: 10 mm and 12 mm 8003030 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

SAE

• 3/8" drive: 1/4" and 5/16" • 1/2" drive: 3/8" and 7/16" 8003031 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

SAFETY WEAR

SAFETY EYEWEAR

E D H G F • Uvextreme™ anti-fog coating minimizes lens fogging and offers resistance to a wide variety of chemicals • Clear lens, for indoor applications where impact protection is required, absorb over 99.9% of UV radiation up to 385 nm • Grey lens, for outdoor applications where sunlight and glare cause eye strain and fatigue, absorb over 99.9% of UV radiation, up to 400 nm, and meet colour traffic signal recognition requirements • All Uvex glasses are CSA approved

A F E T Y

A) SPARTAN® USA GLASSES

• Adjustable temple length • Shield styling with integral side shields, nose bridge • Black frames with built in brow guard CLEAR LENS 5070016 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

349 99 .......................... 3

GREY LENS 5070017 – Wt. 0.1 lbs. B) ULTRASPEC® GLASSES

• Uvextreme™ coating • Wrap around styling • Moulded-in brow guard and side shields with venting CLEAR LENS 5040030 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . GREY LENS 5040031 – Wt. 0.1 lbs.

699 99 .......................... 8

C) EXCELSIOR™ GLASSES

• Classic, light weight metal frames • Hard coated for scratch resistance • Adjustable nose pad BLACK FRAME & CLEAR LENS 5040032 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999 GOLD FRAME & GREY LENS 99 5040033 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 10 D) ASTROSPEC® GLASSES – CLEAR LENS

• Uvextreme™ coating • Lightweight • Adjustable lens inclination and temple length • Soft DUOFLEX® comfort cushions 5040041 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Uvextreme™ coating • Wrap around protective spectacle • Moulded-in nose bridge, side shields and brow guard CLEAR LENS 5070012 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . GREY LENS 5070013 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) GENESIS® FRAME GLASSES

1199 1299

• Uvextreme™ coating • Soft elastomer brow guard cushions pressure points • Exceeds U.S. military Vo standard for impact protection (7x impact energy rating of ANSI/CSA) • Ventilation channel allows moisture to escape for anti-fogging BLACK FRAME with CLEAR LENSES 5070018 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . BLUE FRAME with GOLD LENSES 5070019 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) STEALTH™ GOGGLES – CLEAR LENS

1299 1499

• Uvextreme™ coating • Impact, dust, mist and splash protection • Indirect ventilation system channels and directs airflow over the lens to minimize fogging 99 5040052 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) EYE WEAR CASE

1099

REPLACEMENT LENS 5040042 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

E) BLACK SKYPER® GLASSES

3.99

EYE PROTECTION

• Made of strong, zippered nylon for extra toughness • Durable belt loops for quick storage • Glasses not included 99 5040056 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

FACE SHIELD with CLEAR VISOR J

I I) SAFETY GOGGLES with DUSTPROOF VENTS 5040522 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . J) FACE SHIELD with FLIP-UP CLEAR VISOR

349

Black head gear with 8" x 13-1/2" shield. 5040647 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

• Floating snap-lock suspension • Sponge-cushioned headband • Meets ANSI Z87.1 and CSA requirements 8003290 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3.99

REPLACEMENT VISOR 8003292 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

CLEAR REPLACEMENT VISOR 5040621 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1599 6.99

197

S A F E T Y

SAFETY EYEWEAR All with AVP (Added Vision Protection) coating. AVP provides anti-fog, anti-static, and anti-scratch protection and guards against both UVA and UVB light. CSA approved.

A) BLAZE GLASSES

• Wrap around styling offers maximum coverage at the brow and sides • Lightweight comfort and fog resistant • Moulded-in nose bridge and adjustable locking temple • Clear lens 99 5070008 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . /ea.

B) MARLIN GLASSES

• Dual lens style and frame fits well with half-mask respirators • Fully adjustable telescopic temple arms CLEAR LENS 8032087 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . GREY LENS 8032096 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999 999

A C C) SPHERE GLASSES

• Ultra-light weight frame • Wrap around sport styling • Fully adjustable telescopic temple arms • Comfortable, soft PVC nosepiece CLEAR LENS 8032103 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899 999 999

AMBER LENS 8032112 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . MIRRORED LENS

8032121 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

RESPIRATORS

ACRYLIC READING GLASSES

ALL N95 RATED!

Great for reading specification plates, instruction manuals, etc. Wt. 0.1 lbs.

8010378 – +1.00 8010387 – +1.50 8010396 – +2.00 8010403 – +2.50 8010412 – +3.00 8010421 – +3.50 8010430 – +4.00 . . . . . . . . . . . . . . . . . . . . . . . . . . .

499/ea.

MASKS G

D) PKG. OF 3 DISPOSABLE RESPIRATORS

• Adjustable nose clip and foam nose cushion • NIOSH approved 99 8003305 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg.

E) PKG. OF 2 DISPOSABLE RESPIRATORS with EXHALE VALVE

J H) DUST MASK with REPLACEMENT FILTER 8013936 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT FILTERS – Pkg of 5. 8013927 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . I) BOX OF 50 DISPOSABLE DUST MASKS 5041025 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199 99¢ 699

J) PKG OF 20 DISPOSABLE FACE MASKS

• N95 rated • 2 elastic bands hold mask securely in position 8047516 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

198

• Preshaped disposable mask • NIOSH approved 8003301 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

99 /pkg. F) LOW MAINTENANCE RESPIRATOR with EXHALE VALVE

Suitable for welding, dust, and non-oil mists. 5030009 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

3199

PKG. OF 6 REPLACEMENT PREFILTERS

A rating of N95 states that the filter of the mask is 95% efficient against non-oil particulates. Some examples of non-oil particulates are lacquer and enamel paints, pesticides, welding dust, and non–oil mists.

For #5030009. 5030011 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 15.99/pkg. G) ELASTOMERIC 7-IN-1 RESPIRATOR with EXHALE VALVE

Suitable for lacquer and enamel paints, pesticides, welding, dust, and non-oil mists. 99 5030008 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

MULTI-PURPOSE 7-IN-1 REPLACEMENT CARTRIDGES

For #5030008. 5030010 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . 29.99/pr.

FIRST AID KITS

A) GENERAL PURPOSE FIRST AID KIT

• Contains: first aid book, 12 adhesive bandages, 4 finger tip bandages, four 2" x 2" gauze pads, 6 alcohol wipes, 6 towelettes, 12 cotton balls, 4 adhesive strips, one 1" x 180" gauze bandage, antiseptic cream and three 2-packs of acetaminophen • O’all dim.: 8" x 5" x 2-1/2" 5040181 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

B) 1 TO 5 PERSON INDUSTRIAL FIRST AID KIT

• Contains: first aid book, accident book, 12 adhesive bandages, four 3" x 3" gauze pads, two 2" x 180" gauze rolls, one 1/2" x 16" adhesive tape roll, 1 triangle bandage, two 4" compress bandages, 10 alcohol wipes, 6 assorted pins, scissors, a tube of medicated cream, 2 towelettes, 12 cotton balls, and tweezers • O’all dim.: 11" x 7-1/2" x 2-1/2" 99 5040183 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A F E T Y

KNEE PADS

E) ULTIMATE KNEE PADS C) LIGHT DUTY KNEE PADS

• Lightweight and water resistant • Soft, breathable inner lining helps keep knees cool and comfortable 99 5040205 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) HEAVY DUTY KNEE PADS

• Lightweight and water resistant • Soft, breathable inner lining • Comfortable while kneeling, standing or walking does not pinch or bind behind the knee 99 5040085 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Lightweight and durable • Double straps holds knee pads firmly in place, preventing dirt or sand from entering • Extra foam protection 5040086 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1599

F) PAD 2000 KNEE PADS

• Moulded plastic shell stands up to regular use on the roughest of surfaces • Hinged at the knee • Removable inner foam padding and double on off straps 99 5040087 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HEARING PROTECTION

G) HEADBAND EARMUFFS

• The wide headband with 2-point mounting system provides added stability and well balanced pressure against the head, increasing wearer comfort • NRR of 23 dB 99 5060007 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H) HEADBAND EARMUFFS

• Wide headband with ventilated padding provides a firm fit and a high level of comfort • Easily adjustable headband force • NRR of 25 dB 99 5060008 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEARING PROTECTION

EARPLUGS

I) HEARING PROTECTORS

• Specially formulated non-allergenic polyurethane foam • Tapered design provides comfortable fit • NRR of 29 dB and meets CSA class A standards for hearing protection

NRR of 26 dB. 5040514 – Wt. 0.4 lbs. . . . . . I

J) HEARING PROTECTORS

• NRR of 22 dB • Automatically adjusts for a snug comfortable fit • With 3-position headband 99 5060004 – Wt. 0.4 lbs. . . . . .

K) HEARING PROTECTORS

1 PAIR

99¢ 6 PAIRS 99 5040104 – Wt. 0.1 lbs. . . . . . . 4

599

5040070 – Wt. 0.1 lbs. . . . . .

• NRR of 24.88 dB • Compact folded size for easy storage and portability 99 5060003 – Wt. 0.5 lbs. . . .

199

S A F E T Y

SAFETY VESTS

A) SAFETY VEST

HARD HATS

• 1" wide grey reflective stripes on front and back • Elastic adjustments on both sides 99 8032130 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

B) 5 POINT SAFETY VEST

• High visibility orange mesh with Velcro closure • Tear away shoulders, sides and front • 2" wide stripes on front and “X” on back • Meets BC, Ontario and exceeds all other provincial requirements 99 8032256 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) ANSI CERTIFIED WHITE HARD HAT

• Designed for lightweight comfort and protection • Has 4-point, energy-absorbing, moulded plastic suspension • Integral nape strap fits low on back of head to minimize cap shifting • Accommodates hearing, welding, and face shield accessories 99 5040071 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) CSA APPROVED HARD HATS

• CSA and ANSI Type 1, Class E • Low profile with improved rain trough design draws rain away from back of hat • Ratchet style sizing adjustment • 4 point nylon suspension

SAFETY WEAR G

Wt. 1.1 lbs.

8003912 – WHITE 8004314 – YELLOW (shown) . . . . . . . . . . . . . . . . E

WRIST WRAP

E) XXL DISPOSABLE HOODED COVERALLS 5040169 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

F) BLACK SUSPENDERS

2" wide. 5040184 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

G) SUPPORT BELT – LARGE

Reduce back strain 5050521 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

2199

• Restrains wrist movement, protects against repetitive impact and vibration • Protective palm cushion and breathable mesh lining • Adjustable elastic wrap • Size medium/large 99 5040088 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

COATED WORK GLOVES Ideal for chemical and other liquid applications

I H H) PVC DIPPED GLOVE with KNITTED WRIST

• Waterproof, fully coated PVC • Seamless design • Cotton knit wrist prevents dirt from entering • Provides chemical protection 8004732 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

I) GLOVE with RUBBER COATED PALM

• Rubber palm provides anti-slip grip • Breathable cotton back • Wrinkle finish for good wet or dry grip 8004874 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

K) NITRILE COATED CANVAS GLOVES

J) PVC COATED GAUNTLET GLOVES

• Double dipped construction • Liquid proof protection from anhydrous ammonia, petroleum products, acids, caustics, solvents, and grease • Rough finish for excellent wet and oily grip

200

12" GLOVES 8004827 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . 14" GLOVES 8004829 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499/pr. 649/pr.

• Provides better resistance to splits and tears than leather • Enhanced dexterity • Provides limited chemical protection 49 8004832 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . /pr.

L) FULLY DIPPED NITRILE GLOVE

• Waterproof, anti-slip nitrile coating with soft jersey lining • Superior resistance to oils, grease and solvents • Seamless construction is less prone to wear and splitting 49 8004729 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

WORK GLOVES

Ideal for farms, shops and general use.

A) WHITE COTTON GLOVES 8004864 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) RED LINED FLANNEL JERSEY GLOVES 8004856 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) ANTI-SLIP GRIP GLOVES

99¢/pr. 149/pr.

• Woven cloth gloves with black dot grips • Protects against heat, cold, dirt, abrasions 5050063 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199/pr.

D) ORANGE RUBBER CRISSCROSS GLOVES 8004867 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299/pr.

A F E T Y

E) COWSPLIT UNLINED WORK GLOVES

Size: Large. 5050034 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299/pr. 399/pr.

F) WORK GLOVE WITH LINED PALM 5050136 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) DOUBLE WEAR GLOVES

• Double leather on palm and index fingertips • Max. protection against punctures and abrasions 8004877 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499/pr.

H) SMALL WORK GLOVES

Cowhide yellow cotton back. 5050090 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599/pr.

I) CANVAS/COWSPLIT WORK GLOVES

Size: XXLarge. 5050066 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

/pr.

J) ROUGH JOB GLOVES

• Superior cut resistance for handling glass, barbed wire, and concrete blocks • Extra rubber coating for durability 49 8004873 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . /pr.

K) CANVAS/GRAIN LEATHER GLOVES

Size: Extra large. 5050026 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

/pr.

L) GRAIN LEATHER and CANVAS GLOVE

Rubberized cuff. 8004870 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899/pr.

M) ALL LEATHER DRIVING/RANCHING GLOVES

Durable long lasting leather, easy on/off, unlined. LARGE

9 9 14

8004822 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

/pr. EXTRA LARGE 99 8004825 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . /pr. N) 12 PAIRS UNLINED WORK GLOVES 99 8004872 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . /pkg. O) 50 PAIR LARGE DISPOSABLE VINYL GLOVES

Inside of glove is lightly powdered for added comfort and easy removal. 99 5050061 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . /box

12 PACK!

P) 50 PAIR NITRILE ALL-PURPOSE GLOVES

• Very durable, 3 times stronger than latex or vinyl • Protects against oils and greases • Good for people allergic to latex 8003208 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1699

ANTI-VIBRATION GLOVES • Built in antivibration pad shields against repeated impacts • Abrasion resistant genuine leather pads 5050080 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

CHILDREN'S WORK GLOVES

499

Cowsplit palm lined leather gloves. 5050083 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

399/pr. 201

WINTER GLOVES

D) 3 PAK FLEECE LINED ECONOMY 99 8006349 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg. E) PILED LINED SPLIT LEATHER MITT 99 5050006 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . /pr.

6 7

S A F E T Y

F) COWSPLIT WORK GLOVES

Foam and fleece lined. 5050071 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

849/pr. 999 H) PILE LINED ELASTIC CUFF GLOVES 99 8006335 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

G) WATER BARRIER COWSPLIT GLOVES 8006838 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

I) KNIT WRIST COWSPLIT THINSULATE GLOVES

Knit wrist for added warmth and less dirt entry. 8006836 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

J) FURNACE POCKET PIGSKIN and CANVAS GLOVES

A) FLEECE JERSEY PVC DOT GLOVES 8006344 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) FLEECE LINED ECONOMY COWHIDE 8006342 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

• Fleece lined • Palm and back have pockets to insert hand warmers (8006359 sold separately) 99 8006199 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . HAND WARMERS – Heats on average 52°C to 62°C (126°F to 144°F) for up to 10 hours 79 8006359 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

349 349

K) PILE LINED DRIVERS GLOVES

C) WINTER OIL GLOVES

Leather palm, cowsplit back. 8006339 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

12" red and lined PVC. 5050001 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

L) GOATSKIN/LYCRA DRIVERS GLOVES 8006352 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999/pr.

GLOVES

1099 1499

P) PIGSKIN LEATHER GLOVES

• Premium grain pigskin leather • Pull tab for easy on and off • Seamless wing thumb for comfort and flexibility • Reinforced knuckle strap and fingertips 8001116 – MEDIUM 99 8001117 – LARGE – Wt. 0.3 lbs. . . . . . . . . . . . . . .

Q) GRAIN COWHIDE LEATHER GLOVES

• Stretch fabric finger inserts • Stretch mesh back 8001112 – MEDIUM 8001113 – LARGE – Wt. 0.3 lbs. . . . . . . . . . . . . . .

1799

R) MEDIUM PREMIUM LEATHER GLOVES

• Ventilated grain cowhide leather • Breathable stretch spandex back • Stretch fabric finger inserts • Reinforced palm patch, thumb and fingertips 8001101 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1899

S) PREMIUM ANTI-VIBRATION PIGSKIN LEATHER GLOVES

• Breathable directional stretch mesh back • Anti vibration padded reinforced palm patch • Leather pull tab for easy on and off • Seamless wing thumb for greater comfort 8001104 – MEDIUM 8001106 – LARGE – Wt. 0.3 lbs. . . . . . . . . . . . . . .

M) JERSEY FABRIC GLOVES

• Jersey fabric outwears cotton 3 to 1 • Slim shaped design for custom fit • Rubber dots on key wear and protection areas • Inset thumb for comfort and flexibility 8001120 – MEDIUM 8001184 – LARGE – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . .

499

N) STRETCH FABRIC GLOVES

• 3/4 finger • Finger pull tabs for easy removal 8001108 – MEDIUM 8001109 – LARGE – Wt. 0.3 lbs. . . . . . . . . . . . . . . . .

202

• Ventilated premium grain pigskin leather gloves • Breathable stretch spandex back • Deer split leather finger sidewalls for superior comfort • Anti-vibration padded reinforced palm patch 8001088 – MEDIUM 99 8001089 – LARGE – Wt. 0.4 lbs . . . . . . . . . . . . . .

799

O) LARGE SELECT SPLIT LEATHER GLOVES

• Breathable directional stretch mesh back • Leather reinforced knuckle strap, fingertips 8001103 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1899

T) PIGSKIN LEATHER/CANVAS GLOVES

1199

U) SYNTHETIC LEATHER GLOVES

• Synthetic leather for wear and washability • Breathable mesh back and finger inserts • Neoprene knuckle strap for superior flexibility 8001092 – MEDIUM 8001094 – LARGE – Wt. 0.2 lbs. . . . . . . . . . . . . . .

1999

OUTERWEAR

D) PARKAS A) QUILTED SHIRTS

• 100% double shrunk cotton with quilt inner liner • Two chest pockets, two side seam pockets • Snap closures on front and cuffs • Assorted colours Wt. 1.5 lbs.

8035048 – MEDIUM 8035057 – LARGE 8035066 – XL 8035084 – 2XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

B) QUILTED SHIRTS with HOOD

• 100% double shrunk cotton with quilt inner liner • Jersey knit front fooler with attached hood • Two chest pockets and two side seam pockets • Button front, cuffs, and chest pockets Wt. 1.0 lbs.

8001971 – MEDIUM 8001981 – LARGE 8001982 – XL 8001983 – 2XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999

C) VESTS

• 100% water repellent quilted nylon shell with acrylic pile lining • Knit side panels for easy fit • Extra length in the back with zipper front • Two front pockets

Wt. 4.0 lbs.

8034780 – MEDIUM 8034913 – LARGE 8034922 – XL 8034931 – 2XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6499

E) COVERALLS

• Poly/cotton premium twill with polyfil lining • Heavy duty 2-way front zip • Concealed side openings • Three front and two back pockets Wt. 4.0 lbs.

8034986 – MEDIUM 8035011 – LARGE 8035020 – XL 8035039 – 2XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999

F) OVERALLS

• Bib front overall with 100% cotton 10 oz duck outer • Quilted insulated inner • Water resistant double patched knees • Two way front zipper and two way leg zippers from ankle to hip • Adjustable shoulder straps Wt. 3.5 lbs.

Wt. 1.5 lbs.

8034744 – MEDIUM 8034753 – LARGE 8034762 – XL 8034771 – 2XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• 100% cotton 10 oz duck outer with 6 oz polyfil quilted inner • Adjustable and removable hard hat hood • Front zip with top and bottom snap closure

A F E T Y

4499

SAFETY TAPE

8034940 – MEDIUM 8034959 – LARGE 8034968 – XL 8034977 – 2XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8003825 – 3XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999 8499

SAFETY TAPE

MARKING TAPE G

G) 3" x 300 FT CAUTION BARRICADE TAPE ROLL

Black print on yellow polyethylene tape. 5040089 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

799/roll

H) BLACK ANTI-SLIP SAFETY GRIT TAPE

• Colour-fast flagging tape • 1" wide x 200 ft. long Colour

Wt. (lbs)

ITEM

PRICE

Fluorescent orange Fluorescent pink Fluorescent red Yellow (1" x 300 ft.)

0.3 0.3 0.2 0.4

5040210 5040207 5040208 5040206

2.99 2.99 2.99 2.99

• Use on steps, ramps, trailers, farm equipment or anywhere a potentially hazardous slip may occur • Indoor/outdoor use 2" x 5 FT. 5040124 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . 1" x 60 FT. 5040123 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . 2" x 60 FT. 5040194 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . .

699/roll 1799/roll 3699/roll

203

AUTOBODY TOOLS

H A N D

DENT REPAIR

B A

T O O L S

E D) 9 PC DENT PULLER

A) 4 PC BODY FILLER APPLICATORS

• Metal applicators with plastic grip • Comes in widths of 1", 2", 3", and 4" 2990071 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

B) 2 PC SUCTION CUP DENT PULLER

• 2" dia. suction cups • Closing handle activates suction 8006944 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

C) 4" POWER GRIP SUCTION CUP DENT PULLER

Closing handle activates suction. 2990072 – Wt 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1899

7 PC AUTOBODY KIT

• Includes: nose cone, thin hook, u-hook, duplex nut adapter, acme screw straight hook, utility hook, and 5 lb. slide hammer 99 2990090 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) HEAVY DUTY AUTOBODY SLIDE HAMMER KIT

• 23" long with 14-1/2 lb. hammer weight for heavy duty repairs • Hammers both ways • Includes 4 standard hooks: 1 offset blade, 1 caulking blade, 1 chain and hook, and 1 screw puller 99 8024363 – Wt. 25.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

TRIM TOOLS

F F) TRIM CLIP PLIERS

Remove clips from trim pads and insulation without causing damage. 2990316 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . • Bumping, pick, and body hammers • Combination, mushroom, universal, and heel dollies • Fibreglass handles 2990149 – Wt. 11.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

G) 10-in-1 TRIM TOOL

2799

INDIVIDUAL DOLLIES Wt 1.7 lbs. 2990078 – 2990079 – 2990080 – 2990081 –

COMBINATION DOLLY MUSHROOM DOLLY UNIVERSAL DOLLY HEEL DOLLY . . . . . . . . . . . . . . . . . . . . . . .

799

399

• Removes various autobody clips, trims, mouldings, etc. • Serrated edge for panel seam clean up, plastic door clip remover, windshield moulding clip release tool, headlight spring tool, beveled edge for removing moulding, 13 mm wrench for windshield wipers, door trim clip installer, door weather strip clip remover, trim pad removing tool, and window handle removing tool 99 2990039 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

HYDRAULIC RAMS

204

For use with hydraulic frame kits. Capacity Closed Length H 2 ton 5.5" I 4 ton 1.7" J 4 ton 10-5/8" J 10 ton 12-1/8" K 10 ton 5.2"

Extended Length 9.4" 2.3" 15-7/8" 18-3/8" 7.5"

I Stroke 3.9" 0.6" 5-1/4" 6-1/4" 2.3"

Wt. (lbs.) 1.9 1.8 4.1 10.7 4.6

K ITEM 1200040 1200037 1202357 1202365 1200038

PRICE 34.99 34.99 39.99 79.99 69.99

HYDRAULIC LIFT KITS

A N D

• Large base feet for extra stability • Non-slip rubber grips • Ram cylinders are made from special seamless steel tubing with smoother, harder finish • Spring return and safety overload valve 4 TON LIFT KIT

Stroke: 5-1/4". 1270255 – Wt. 18.4 lbs. . . . . . . . . . . . . . . . . . . . . .

11999

10 TON LIFT KIT

Stroke: 6-1/4". 1270248 – Wt. 27.5 lbs. . . . . . . . . . . . . . . . . . . . . .

QUICK COUPLERS

REPLACEMENT SEALS

For 4 ton pump For 4 ton ram For 10 ton pump For 10 ton ram

15999

Wt. (lbs.)

ITEM

0.1 0.1 0.1 0.1

1250007 1250002 1250004 1250003

PRICE 6.99 5.99 6.99 5.99

• 1/4" male NPT with swivel female coupler • Threads onto ram 1250008 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 7.49 • 1/4" female NPT with swivel female coupler • Threads onto hose 1250009 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 7.49

HYDRAULIC PUMPS

O O L S

NOTE: Use 10 ton pump ONLY

with 10 ton ram and 4 ton pump with 4 ton ram. DO NOT INTERCHANGE A)

Oil capacity Max. pressure O’all length Wt. (lbs.) ITEM PRICE

4 TON PUMP

15 cu. in. 7,000 PSI 14-3/4" 11.6 lbs. 1220987 59.99

50 cu. in. 10,000 PSI 20" 13.5 lbs. 1220995 99.99

10 TON PUMP

B) AIR/HYDRAULIC PUMP

• Air pressure range: 60-120 PSI • Oil capacity: 33 cu in. • Develops up to 10,000 PSI with safety hydraulic pressure overload valve 99 1010545 – Wt. 9.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

349

PULL BACK RAMS

6 FT HIGH PRESSURE HOSE

These pullers are designed to be used with our hydraulic lift kit or pumps on this page, or our hydraulic body and frame kit on page 206. Capacity Closed Extended Stroke Wt. ITEM Length Length (lbs.) 2 ton 16.6" 21.6" 5" 6.3 1200041 5 ton 20.5" 25.6" 5.1" 12.0 1200043

PRICE 69.99 79.99

• To be used with pumps and rams • Fits both 4 and 10 ton models • Comes with male quick coupler end already installed • Max. pressure: 10,000 PSI 99 1294073 – Wt. 3.0 lbs. . . . . . . . . . . .

1/2 TON DUCKBILL SPREADER

CAULKING GUN

• Use with hydraulic lift kits or pumps • Widen gaps and openings, force out dents and creases, and separates parts • Max. opening: 5" 1270022 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Pistol grip design for easy balance while using • O’all length: 13-1/2" • Plastic construction with metal tips 2940095 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

599

205

HYDRAULIC BODY and FRAME CLAMPS REPAIR KITS

A N D

T O O L S

A For use with pull back rams.

A) ANGLE CLAMP 1250068 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Lets you make collision damage repairs in half the time of conventional pounding methods • Available in 4 and 10 ton models, and contains a large assortment of the most commonly used attachments, including a duckbill spreader 4 TON KIT

Includes one 4 ton hydraulic pump with swivel hose couplers, positive ram travel, safety overload valve, 6 ft. hydraulic hose, hydraulic ram featuring cylinder of stainless steel tubing with extra hard finish (closed height 10", extended height 15"), five 1" O.D. extension tubes: 21", 18", 10", 5", 3", 5 lock pins, 3 snap-in connectors, 1 V-head, 1 concave head, 1 rubber head, 1 ram toe, 1 body toe, 1 flathead, 1 male adapter, 1 hydraulic duck bill spreader (opens to 5"), 1 heavy duty steel box with hinged lid, and double carrying handles. 99 1270020 – Wt. 43.5 lbs. . . . . . . . . . . . . . . . . . . . . .

149

10 TON KIT

Similar to the 4 ton kit with the following exceptions: 10 ton hydraulic pump, ram (closed height 12", extended height 18"), four 1-1/2" O.D. extension tubes: 21", 15", 10", 4-1/2", 4 lock pins, and 1 clamp toe. 99 1270021 – Wt. 71.7 lbs. . . . . . . . . . . . . . . . . . . . . .

199

AUTOMOTIVE SANDERS

4999 4999

HIGH PRESSURE SCREW TYPE QUICK COUPLERS

• 10,000 PSI max. working pressure • NBR seals –25 to 120°C (-13 to 248°F) • Can be disconnected under pressure Size (NPT) Wt. ITEM (lbs.) C 1/4" Male* 0.2 1290373 D 1/4" Female* 0.3 1290372 E 3/8" Male** 0.3 1290375 F 3/8" Female** 0.5 1290374

PRICE 6.99 10.99 6.99 12.99

* 20 PSI pressure drop @ 2.5 GPM ** 20 PSI pressure drop @ 4 GPM

DOOR SPRING TOOL H

B) LONG NOSE CLAMP 1250071 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Zinc coating to resist rust • Quickly and easily remove or install door hinge springs • Designed to service GM cars and light trucks • Can be used with a 1/2" open end or ratcheting box wrench 99 8006597 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

DOOR UPHOLSTERY TOOLS G) RUBBER SANDING BLOCKS 2-3/4" x 4-3/4" (SHOWN) 2920337 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3/4" x 9" 8044403 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399 599

H) 9-1/4" FLEXIBLE SANDER

• For sanding curved or flat surfaces • Great for wet or dry sanding 2970209 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

QUICK CHANGE SANDERS

Place the tool under the edge of the door upholstery panel and insert into the fasteners as far as possible, then simply pry up.

• Wooden handle • Quick change spring clamp

206

I) 6-3/4" x 2-3/4" 2970168 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . J) 16" x 2-3/4" 2970170 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999 1799

K) DOOR UPHOLSTERY REMOVER 2990063 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . L) DOOR UPHOLSTERY REMOVER 2991016 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499 1299

SYNTHETIC STEEL WOOL

• Washable and reusable. • Medium grit on one side, fine grit on the other • O’all dim.: 3-3/4" x 2-3/4" x 1" 49 2971232 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . /ea.

• Size: 6" x 9" • Longer lasting than steel wool • Can be folded or cut to any size • Can be rinsed and reused many times • 2 per package PRICE

Grey 2970163 Maroon 2970164

3.99 3.99

ITEM 2922508 2922490 2922482 2970045 2970046

PRICE 3.49 3.49 3.49 3.49 3.49

WINDSHIELD TOOLS

ALUMINUM OXIDE

1-1/2" wide x 15 ft. long. Grit Wt. (lbs.) 60 0.3 80 0.3 120 0.3 180 0.2 320 0.2

EMERY

EMERY CLOTH ROLLS

GARNET ALUMINUM

ITEM

- WET/DRY

Colour

SILICON CARBIDE

Fine Medium

Steel Wool Equiv. #000 #00

A N D

SANDPAPER

Wt. 0.1 lbs.

Grit

MEDIUM/FINE SANDING SPONGE

Grit 60 100 150 220 60 80 150 40 80 120 180 240 280 240 320 400 600

ITEM PRICE 2970062 0.69 2970064 0.59 2970066 0.59 2970067 0.59 2970075 1.49 2970076 1.49 2970077 1.39 2970056 0.99 2923928 0.59 2923936 0.59 2923944 0.59 2923951 0.59 2970061 0.59 2970070 0.89 2970072 0.89 2970073 0.89 2970074 0.89

O O L S

A) WINDSHIELD WASHER NOZZLE NEEDLE

Keep nozzles free of foreign matter or correct direction of spray. 99 2990023 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) WINDOW & DOOR HANDLE CLIP REMOVER/INSTALLER

Works on GM, Ford, and other models using common “C” type clips. 49 2990060 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) WINDOW MOULDING TOOL

• Removes clips and spreads rubber gasket on windshield • Fits most Chrysler and many domestic vehicles 99 8002190 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) WINDSHIELD REMOVER

Cable action makes cutting out windshields fast and easy. 2990067 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1199

REPLACEMENT BLADE 2990215 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) WINDSHIELD WIPER REMOVER

1.99

• Compact design offers easy access in confined spaces and eliminates risk of damage to wiper arm or surrounding paintwork • Allows easy removal of stubborn wiper arms • Suitable for straight or taper spline spigots 99 8002225 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) TIGHTWIRE GRIP WINDSHIELD REMOVER

Includes 6 ft. roll of cut-out wire. 2990045 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1799

207

H A N D

T O O L S

Child Find Manitoba is a volunteer based, non-profit, registered charity incorporated in April 1985 by a group of concerned individuals who were committed to the fundamental belief in the personal safety of all children.

Our organization is governed by a volunteer Board of Directors and is funded primarily through individual and corporate donations. We work cooperatively with public agencies and non-profit organizations engaged in the area of child protection and advocacy.

ALSO VISIT WWW.CYBERTIP.CA TO REPORT ONLINE EXPLOITATION

1-800-387-7962 All Calls Confidential—No Name Required A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

• Step-by-step procedures, references to hundreds of easy-to-follow photos • Written from “hands-on” experience using common tools • Detailed wiring diagrams

CHEVROLET

REPAIR MANUALS – Wt. 1.2 lbs.

.........................................................

1899

Chevrolet & GMC In-line 6-cyl., 4.3 L V6 and V8 Chevrolet & GMC All full-size engines 2-wheel drive & 4-wheel drive. Pickups (’67 to Pickups (’67 thru ’87) gasoline ’87), Blazer, Jimmy, & Suburban (’67 to ’91)

4490090

& GMC full-size (C & K) gasoline models Pickups Chevrolet & GMC All Chevrolet to ’00), Blazer & Jimmy (’92 to ’94), Suburban (’92 to ’98), Pickups (’88 thru ’00) (’88 Tahoe & Yukon (’98)

4490027

S-10 & GMC S-15 All Chevrolet S-10, GMC S-15 and Sonoma Pickups (’82 to ’93), Pickups & Olds Bravada (’82 thru ’93) S-10 Blazer & S-15 Jimmy (’83 to ’94) Olds Bravada (’91 to ’94)

4490023

Chevrolet Silverado & GMC Sierra Pick-ups, 1999 thru 2002, Silverado, Sierra, Suburban, Tahoe, and Chevrolet Suburban & Tahoe 2000 thru 2002, GMC Yukon & Yukon 8007396 XL 2000 thru 2002. Does not include C/K Classic, diesel, 8.1L Yukon engine or heavy-duty model information

208

JEEP FORD DODGE

Chevrolet S-10 and GMC Sonoma pick-up ’94 thru ’01, S-10 & GMC Sonoma All Blazer & GMC Jimmy ’95 thru ’01, Olds Bravada & Isuzu 8005698 Pick-ups '94 thru '01 Chevrolet Hombre ’96 thru ’01 Pick Ups Pickups and Bronco (’83 thru ’96) Cherokee Wrangler

All Dodge full-size pick-ups, gasoline and Cummins turbo-diesel engines ’94 through ’01

4490060

All Ford Full-size Pickups F-100 thru F-350 and Bronco 6-cyl. & V8 4490028 engines (’80 to ’96) All models ’93 through ’00 All models ’87 through ’00

8007397 8007398

H These comprehensive manuals give the home mechanic an in-depth look at specific areas of auto repair. Each manual offers easy-to-follow text plus hundreds of hands-on photos.

TECHBOOK SERIES – Wt. 1.1 lbs.

.......................................................

1999

Manual Description

Information Covered ITEM Covers computer controlled cars and light trucks from 1980 thru 1996. AUTOMOTIVE Features computer trouble codes and troubleshooting information for all 4490012 COMPUTER CODES major manufacturers. Complete step-by-step procedures lead the reader from engine removal CHEVROLET through the entire rebuild process. Hundreds of hands-on photographs ENGINE OVERHAUL make it easy to follow. Covers 262, 265, 267, 283, 302, 305, 307, 327,350, 4490022 MANUAL 396, 400, 402, 427, and 454 cu. in. V8 engines. This comprehensive manual covers maintenance, repair and overhaul on GM 350 cu. in. (5.7 litre) and 379 cu. in. (6.2 litre), Ford 420 cu. in. (6.9 4490026 litre), 445 cu. in. (7.3 litre), and 445 cu. in. (7.3 litre Power Stroke) engines

GM and FORD DIESEL ENGINE REPAIR MANUAL

Covers basic electrical fundamentals, troubleshooting, and repair for both domestic and foreign vehicles. Includes engine starting and charging 4490017 systems, lights, gauges, and accessories. AUTOMOTIVE BODY A complete photographic guide showing car care and detailing, rust REPAIR and prevention as well as body repair and painting – from minor dents to major 4490020 PAINTING MANUAL structural damage AUTOMOTIVE ELECTRICAL MANUAL

AUTOMOTIVE TOOLS

A N D

T O O L S

VALVE & PISTON TOOLS

A E B

A) VALVE LAPPERS

D) PISTON RING GROOVE CLEANER

For hand lapping valves.

• Fits 2" to 6" pistons • Includes three 6-blade cutters first: 1/16", 5/64", 3/32", 1/8", 5/32", and 3/16"; second: 2, 2.5, 3, 4, 4.5 mm, and 1/4"; third: 1.2, 1.5, 1.8, 2.8, 5.0, and 5.5 mm • Covers all piston ring grooves 99 2990064 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1-1/8" and 1-3/8" CUPS 2990130 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 5/8" and 3/16" CUPS 99 2990119 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

B) PISTON RING COMPRESSORS

SK5 spring steel. Ring Size Height Wt. (lbs.) 2" - 3" 2" 0.4 2-1/2" - 5" 4" 0.6 3-1/2" - 7" 4" 0.7

ITEM PRICE 8031293 7.99 8031300 9.99 8031319 12.99

C) UNIVERSAL OVERHEAD VALVE SPRING COMPRESSOR

For removal of valve springs on most automotive applications without removing cylinder head. 99 8034842 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) VALVE SPRING COMPRESSOR

Sizes include: 19, 23, and 25 mm dia. (3/4", 29/32", and 1" dia.). 8006640 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3999

F) PISTON RING COMPRESSOR SET

• Installs pistons from 2 7/8" - 4 3/8" (73 - 111mm) • Fine tooth ratchet pliers lock in place for accurate compression of piston rings • Pliers work both horizontally and vertically 99 8048891 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

209

VALVE GRINDING COMPOUND

A N D

• Grease mix • Aids valve grinding and seating operations • 115 ml can 99 6440005 – Wt. 0.4 lbs. . .

VALVE & PISTON TOOLS

VALVE SPRING COMPRESSOR

• For Briggs & Stratton, Clinton, Harley-Davidson, etc. • For springs up to 1-1/16" 2918456 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2399

DISCONNECT TOOL SETS

T O O L S

A) PISTON RING INSTALLER

• Reduces ring breakage • Remove and install most 3/64" to 1/4" rings in passenger car and light truck 2918274 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

B) RING COMPRESSOR

Spring clutch assures a proper fit on the piston and a positive locking action. RANGE: 2-1/8" to 5" 2915205 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . RANGE: 3-1/8" to 7" 2915213 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1599 1799

C) STONE-TYPE GLAZE BREAKER

• Use with any electric or cordless drill • Range 2" to 7" • Fitted with 220 grit stones 2914588 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT 220 GRIT STONES 2991057 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) VALVE SPRING COMPRESSOR

G E) 9 PC DISCONNECT TOOL SET

• Works on 5/16", 3/8", 1/2", 5/8", and 3/4" lines • Separates fuel, A/C, and transmission connectors on most domestic cars and trucks 99 2920694 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3699

F) 3 PC FUEL LINE DISCONNECT SET

• Fits many Ford, Mercury, Opel, Dodge, Renault, GM, Chevrolet, Buick, Pontiac, and Fiat vehicles

12.99 • Sizes: 1/4" to 5/16" (blue), 3/8" (green) and

• Makes compressing and removing keepers simple • No need to remove the head 99 2991065 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

VACUUM PUMP KIT

1/2" - 7/8" (red) 8017059 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

G) 4 PC FUEL/OIL LINE DISCONNECT TOOL SET

• Anodized aluminum • Separate fittings on fuel lines, fuel filters, fuel tank lines, and automatic transmission oil cooler lines • Sizes: 1/4", 5/16", 3/8", and 1/2" 99 2990303 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HOSE PINCHERS

210

• For testing vacuum operated components • Includes detailed, illustrated manual for vacuum testing 99 2928836 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Quick, easy way to pinch off vacuum or fuel lines without damaging the line. 99 2990414 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . /pr.

AIR CONDITIONING/FUEL LINE DISCONNECT TOOL SET

• Easily disconnects air conditioning lines and quick connect fuel lines • Tool sizes: 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" disconnect the spring lock couplings on Ford and Chrysler air conditioning lines • Works on fuel line quick connect couplings found on GM, Ford, and Chrysler • 5/16" size fits on push lock connectors found on Ford radiators and transmission lines 99 2990323 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

OIL FILTER LOCKING PLIERS

• Range: 2-1/8" to 4-5/8" • Nickel plated chrome vanadium steel 2990243 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HOSE CLAMP PLIERS

A N D

A) HOSE CLAMP PLIERS

• Designed to remove and install flat band hose clamps in hard-to-reach areas • Locking latch securely holds clamp in position • Pliers feature angled jaws with rotating tips to grip clamps at any angle 99 2920951 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

B) 2 PC HOSE and WIRE PLIERS

• Ideal for vacuum, fuel, and heater hose 1/4" to 3/4" O.D. • Also works well on spark plug wires • Zinc plated all steel construction • Bent nose with 360° swivel jaws • 1 each of 8-1/2" and 10" plier 99 8001127 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

1299 OIL FILTER WRENCHES

STRAP WRENCH SET

• Loosen, tighten, or hold any shape or material without scratching • Perfect for oil filters • Range: 0 to 4", 0 to 6-3/8" 8050805 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Steel jaws grip filter without slipping • Fits most standard filter sizes • For use with a 3/8" driver

1299

2-1/2" to 3-1/8" (60 to 80 mm) 8002216 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 3-1/8" to 3-7/8" (80 to 100 mm) 8031426 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199 1399

OIL FILTER WRENCHES C) “SWIVEL GRIP" OIL FILTER WRENCH

Handle swivels to clear obstructions. RANGE: 2-7/8" TO 3-1/4" 2919884 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . RANGE: 3-1/2" TO 3-7/8" 2919876 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . RANGE: 4-1/8" TO 4-1/2" 2990158 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

1099 1099 1399

D) “BIG RANGE” FILTER WRENCH

• Fits any spin-on oil filter up to 6" dia. • Use with 1/2" drive or 3/4" wrench 2922193 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

1199

E) HEAVY DUTY OIL FILTER WRENCH

• “Swivel Grip” makes it easy to turn in tight places • Special gripping teeth make sure no slipping occurs • Fits most John Deere tractors, some Case, Case/IHC, and Allis Chalmers • Range: 4-3/4" to 5-3/16" 2925014 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

1599

F) STRAP WRENCH

• Tensile strength of strap is 1,350 PSI • Range: 1" to 6-5/8" 2920582 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

211

H A N D

SPECIALTY AUTOMOTIVE WRENCHES A) DISTRIBUTOR CLAMP WRENCH

• 1/2" and 9/16" wrench openings fit most American made distributors • Use assembled or individually with 3/8" dr. ratchet 2990070 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

B) 11 PC ANTENNA & RADIO WRENCH SET

• Antenna wrench designed to service Ford, GM, Chrysler, VW, Toyota, and others • Chrysler and Ford radio removal tool • Code retriever for GM • 2 Torx bits T-10, 15 • 3 tamper resistant torx bits: T-7, 10, and 15 • Offset bit ratchet handle 99 8007113 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) FAN CLUTCH WRENCH SET

O O L S

• Use with 1/2" dr. breaker bar or ratchet • Sizes 40, 48, 54, 68, 72, 76 and 83 mm • Service water pumps, fan clutches and other front-end engine components such as timing chains • Fits many Ford, Mercury, Lincoln vans, pick-ups, SUVs and large passenger vehicles and some Mazda, Dodge and Jeep vehicles 99 8034815 – Wt. 8.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CARBURETOR and INJECTOR TOOLS D) FORD IGNITION MODULE TOOL

• For 7/32" hex retaining bolts on Ford ignition module • Can be used with 1/2" wrench 2990009 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

E) 11-1/2" CARBURETOR ADJUSTING TOOL

• Flexible shaft reaches into hard-to-reach locations • Five quick change adapters sizes: double D, 1/4", 3/32", 2.5 mm, and 4.5 mm hex • Handle stores tips 2990121 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) 8 PC ELECTRONIC FUEL INJECTION TEST LIGHT SET

• Quickly and easily test electronic fuel injection systems on: GM TBI, GM PFI, BOSCH PFI, GEO TBI, FORD TBI, and GM SCPI equipped vehicles • 6 noid lights, 2 IAC signal test lights 99 8014007 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CYLINDER LEAKAGE TESTER

212

899

• Specifically pinpoints problems for a more accurate engine diagnosis, quickly spotting bad valves, worn rings, cracked cylinder heads, and blown gaskets • Takes over where compression gauges leave off • Easy-to-use – works from shop air line • Cylinder leakage testing is widely used by professional mechanics to accurately pinpoint the causes of low compression • Combination 14 and 18 mm adapter, fits most engines 99 4230769 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

MECHANIC’S STETHOSCOPE

• Provides a fast and easy way to locate noises in engines or bearings and other moving parts • Aluminum alloy probe/needle for finding exact location of specific noises. • Rubber trumpet for checking vacuum and pressure flow • Useful for synchronizing multi-carburetors 99 8006622 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HI-FI STETHOSCOPE

Pinpoints source of noise in engines, transmissions, and differentials. 2918266 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

TEST/TUNE-UP TOOLS A) REMOTE STARTER SWITCH

Crank the engine from under the hood. 4230067 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) ENGINE COMPRESSION TESTER

• 2-1/4" dia. gauge reads 0 - 300 PSI, 0 - 20 kg/cm , or 0 - 20 bar • Adapter fits 14 mm and 18 mm spark plugs • 10" flexible hose 99 4230071 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

C) VACUUM/FUEL PRESSURE TESTER

A N D

• 0 - 10 PSI (0 - 700 g/cm2) and 0 - 30 in-Hg (0 - 700 mm-Hg) • Flexible hose and fitting included 99 4230070 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) HIGH BEAM TIMING LIGHTS

• Works on all 12V gasoline engines • Neon Double Check Indicator • With pick up clamps and leads PLASTIC INDUCTIVE TIMING LIGHT 4230055 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WITH ADVANCE TIMING FEATURE 8000943 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999 4999

O O L S

SENSOR SOCKETS E) OIL PRESSURE SWITCH SOCKET

• O’all length: 54 mm • Two step design fits 1" and 1-1/16" oil pressure sending units • Use a 3/8" square driver or a 3/4" hex wrench 99 2990255 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) OXYGEN SENSOR AND VACUUM SWITCH SOCKET

• Slotted for sensor wire & vacuum port clearance • Use with 3/8" dr. ratchet or 1" wrench 2990254 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

749

G) OXYGEN SENSOR WRENCH

Use with 3/8" drive ratchet. 2990140 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1299

MULTIMETERS C-MOS technology.

All models include batteries. H) 0700182

DC Voltage AC Voltage DC Current AC Current Resistance Continuity Wt. (lbs.) PRICE

I) 0700249

I) 0700366

J) 0702613

K) 0700250

L) 0700251

0-500V 200mV-1,000V 200mV-1,000V 200mV-1,000V 1V-1,000V 200mV-1,000V 0-500V 200V-750V 200V-750V 200mV-700V 1V-750V 20V-750V 0-250mA 200µA-10A 200µA-10A 20µA-20A – 20µA-20A – – – 20µA-20A 0.1A-1,000A 200mA-20A 0-1MΩ 200Ω-2,000kΩ 200Ω-2,000kΩ 200Ω-20MΩ 200Ω-200KΩ 200Ω-200MΩ – audible audible audible audible audible & LED 0.3 0.4 0.5 0.7 1.1 1.3 9.99 19.99 24.99 39.99 49.99 59.99

EXTRA FEATURES: I) 0700366 – Temperature:-20°-1,370°C (-4°-2,434°F) J) 0702613 – Transistor hFE K) 0700250 – Insulation with optional 8052402 (see following page) L) 0700251 – Temperature: 40°-1,000°C (-40°F -1,832°F), Capacitance: 20µF-2nF, Frequency: 2kHz-20kHz,

diode, transistor hFE, logic

213

CIRCUIT TESTERS

INSULATION TESTING UNIT

A N D

C A) CIRCUIT TESTER

T O O L S

• Checks 6, 12, and 24 volt circuits • Tests for shorts in wiring, connectors, fuses, and switches in automotive electrical systems • Extra long 48" leads 99 4211093 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) CONTINUITY TESTER

• Tests 6, 12, and 24 volt circuits, voltage regulators, fuses, switches, aramatures, distributors, and appliances • Self powered by 1 “AA” (1.5V) battery (not included) • Extra long 48" leads 99 4211094 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

• For use with 0700250 clamp meter • Use on electric motors, transformers, electrical wiring, and cable insulation • Can also be used for testing TV sets and appliances for current leakage • Range: 100 KΩ to 2,000 MΩ • Accuracy: ± 4% • Batteries included 8052402 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

INFRARED DIGITAL THERMOMETER

C) CIRCUIT SOUNDER

• Utilizes flashing lights and buzzer sounds to check 6, 12, and 24 volt circuits • Tests for shorts in wiring, connectors, fuses and switches in automotive electrical systems 99 4211092 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BATTERY TESTER

• With starter test feature and charging system tester • Make a complete evaluation of any 6 or 12 volt battery in 30 seconds • Performs present voltage test, puts 10 sec. load on battery, checks charge and tests charging circuit while engine is running • Rated at 1,000 cold cranking amps • Convenient handle with clamp holders • Outside power not required 99 8016416 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Allows temperature measurement of hot, hard to reach, or moving parts from a distance • Laser sighted • Backlit LCD display • Temperature range: -30°C to 550°C (-22°F to 1,022°F) • Accuracy: +/-2°C (4°F) on -30°C to 100°C (-22°F to 212°F) +/-2% reading on 101°C to 550°C (213°F to 1,022°F) • Applications include electrical and industrial, heating, ventilation and air conditioning, automotive, construction, manufacturing, and the food industry • 9V battery included 99 8001782 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . .

129

SPARK PLUG TOOLS

FEELER GAUGES

F) STANDARD/HIGH ENERGY SPARK PLUG GAUGE and GAPPER

D E D) STANDARD FEELER GAUGE

15 steel blades sizes: 0.002" to 0.025" plus one 2" steel rule. 2990331 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

E) DELUXE FEELER GAUGE

214

31 blades sizes: 0.0015" to 0.035", plus a 0.010" brass blade. 2990117 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Tapered edge gauges and gaps all spark plugs types from 0.020 to 0.100 • Specially designed hole with flange adjusts ground electrode of plug without pressuring centre electrode 49 2990489 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1099

G) IGNITION SPARK TESTER

• Check ignition spark without removing the spark plug • Works on standard and electronic ignition systems • Tool is calibrated to measure ignition voltage 99 2990056 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

SPARK PLUG TOOLS B

A) 3/8" DR SPARK PLUG SOCKETS 2911147 – 5/8" 2911139 – 13/16" – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . .

299

F) SPARK GAP TESTER

• Attach to spark plug wires to measure spark gap • Jaws adjust to 5 positions 99 2990221 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

B) 8" SPARK PLUG WIRE PULLER

• Works well on recessed plugs • Engages below boot preventing wire damage 2990146 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) HIGH TENSION TESTERS

Checks electrical systems by putting included testers between spark plugs and high tension wires. 99 2990138 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) SPARK PLUG REMOVER/INSTALLER

• Flexible shaft for installing and removing hard to reach plugs; turns at any angle • Eliminates cross threading 49 2990025 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H) SPARK PLUG BOOT PLIERS

• Long arms designed to remove hard-to-reach spark plug boots without pulling plug lead from clip • Double insulated to give protection against shock • Double dipped jaws ensure full coverage of all contact areas • Angled nose for easier access to boots 99 2990108 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

D) SPARK PLUG WIRE TESTER

• Use on 12 volt automotive systems to check spark plugs and wires without piercing • Light flashes indicating sound wire 99 2990129 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

A N D

T O O L S

E) SPARK PLUG HOLE THREAD CHASER

• Removes carbon, corrosion, straightens thread • For 13/16" deep sockets, open end, box wrenches • For 14 and 18 mm plug holes • Tapered ends for easy starting 99 2990058 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

I) SPARK PLUG RETHREAD KIT

• Contains tap and reamer and 4 threaded inserts: 3/8", 7/16", 1/2", and 3/4" long. • For 14 mm spark plugs 99 2990142 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BATTERY TOOLS L) BATTERY BRUSH 8007435 – Wt. 0.1 lbs. . . . . . . . . . . . .

199

M) 4-WAY BATTERY POST TERMINAL CLEANER

• Removes dirt and corrosion • Creates positive electrical contact • Fits most batteries 99 2990113 – Wt. 0.3 lbs. . . . . . . . . . . . .

N) BATTERY TERMINAL SPREADER and CLEANER

O’all length: 6-1/2". 2990223 – Wt. 0.6 lbs. . . . . . . . . . . . .

799

O) BATTERY TERMINAL/ALTERNATOR BEARING PULLER

Sharp jaws are able to engage either below or on the sides of the terminals. 99 2990250 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CLUTCH TOOLS N) UNIVERSAL ADJUSTABLE A/C CLUTCH WRENCH

Adjustable locking pin allows for use on most compressor clutches. 8007104 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O) SAE CLUTCH ALIGNING TOOL

• Shaft and bushings fit 8 pilot bearing sizes • Plate aligning cone with 1" and 1-1/8" turned diameters for automatic fit of most clutch plates • Tapered cone to fit all others 99 2990100 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O) METRIC CLUTCH ALIGNING TOOL

• Shaft, 5 pilot bushings, and 2 plate alignment cones with graduated turned diameters for “automatic” fit of most metric clutch plates • Tapered cone to fit all others is provided 99 2990195 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P) TRUCK CLUTCH ADJUSTING WRENCH

For internal adjustment of spicer angle-spring and multiple lever clutches found on most heavy duty trucks. 99 2920419 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . .

215

COIL SPRING COMPRESSORS A) MacPHERSON STRUT COIL SPRING COMPRESSOR

A N D

• Compresses springs for easy strut service • U-bolts securely attach tool to spring during operation for maximum safety 2920186 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . .

2499/set

B) COIL SPRING COMPRESSOR

• Single units compresses both sides of coil spring • Fits inside of the spring 99 2990132 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) STRUT SPRING HOOK COMPRESSOR

• Hook is drop forged, heat-treated carbon steel • Screw is made from alloy steel 8023104 – Wt. 7.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

3999

D) HEAVY DUTY COIL SPRING COMPRESSOR

• Bolt length: 11" • Chrome moly steel bolt, carbon steel fork, hooks, heat treatment and black finish 99 8056514 – 5.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

STEERING and SUSPENSION TOOLS E F G) UNIVERSAL TIE ROD END REMOVER

• Compact design allows for use on most vehicles • Easily press out tie rod ends as well as drag links • Cupped swivel screw adapter holds firmly on tie rod stud 99 8000947 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) BALL JOINT SEPARATOR

• Heat treated carbon steel with chrome plating • Separates ball joint from spindle support arm • Jaw design insures positive fit when removing stubborn ball joints 8004135 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

I) 5 PC TIE-ROD/BALL JOINT SEPARATOR KIT

• Includes 3 sizes of forks and 2 handles • Drop forged heavy duty chrome vanadium steel forks • 1 handle fits air hammer, other for use with regular hammer 99 2990246 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

J) HEAVY DUTY PITMAN ARM PULLER

• Suitable for most cars and light trucks • Fully adjustable heavy duty jaws • Max. opening: 2-1/2" • Max. throat depth: 3-3/8" • Length: 6" 8006971 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

L E) BALL JOINT/TIE ROD SEPARATORS

Knurled handle for secure grip. BALL JOINT SEPARATOR

Length: 11-7/8", opening: 15/16". 8051831 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

TIE ROD SEPARATOR

Length: 16", opening: 11/16". 8051680 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

F) PITMAN-ARM PULLER

216

• Fits most cars and light trucks • Opening size: 1-5/16" • Pull travel: 2-1/2" 2990068 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

5999

K) U-JOINT REMOVER/INSTALLER

1499

• Remove and replace automotive universal joints with needle-type bearings (including GM plastic pin type U-joints) 99 2990292 – Wt. 8.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

L) BALL JOINT/U-JOINT REMOVER/INSTALLER KIT

• Removal and installation of press fit parts like ball joints, universal joints, and truck brake anchor pins • Ideal for rusted and corroded parts • Set contains a C-Frame press, 3 receiver tubes (2-3/4" I.D. x 3" O.D., 2-1/4" I.D. x 2-1/2" O.D., and 1-3/4" I.D. x 2" O.D.), installation and removing adapters 99 2990269 – Wt. 15.7 lbs. . . . . . . . . . . . . . . . . . . . . .

134

CV JOINT BANDER and CUTTER

• 1pc CV joint banding tool with cutter • 2pc stainless steel banding with clips 8001187 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT BANDS – PKG OF 2 8001188 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

DRIVE JOINT INSERTER

1499

2.99/pkg.

• For easy installation of CV axle shafts • Compresses and holds axle circlip while allowing user to tap axle into place 99 8004473 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4WD WHEEL BEARING LOCKNUT SOCKETS

T B

Heat treated chrome vanadium steel with black finish. A) 4 TOOTH WHEEL BEARING LOCKNUT SOCKET

• For 1/2 ton and LD 3/4 ton • Fits 59-85 Ford F-Series and Bronco, 95 and up Ford F-Series and Broncos with manual hubs, 93 and up Ford Ranger and Explorer with manual hubs, 69-89 Dodge with manual hubs, and 60-90 GM truck and full size Blazer/Jimmy 99 2990021 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

B) 6 TOOTH WHEEL BEARING LOCKNUT SOCKET

• For 1 ton and HD 3/4 ton • Fits 78-84 Ford F-Series and 73-81 GM 2990253 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1699

D E

O O L S

D) 4 LUG SPINDLE NUT SOCKET

Fits 1985 1/2 to 1995 Ford F series HD 3/4 ton and 1 ton Dana 50 IFS or Dana 60 front axle 1982-1990 GM HD 3/4 ton and 1 ton trucks. 99 8002718 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

E) 6 PC SPINDLE NUT SOCKET SET

C) WHEEL BEARING LOCKNUT SOCKET

• Fits many 1984 to 1994 1/2 ton trucks and select 1/4 ton models • 4 slot external 99 8002717 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• For most 4WD trucks • Also fits Toyota 3/4 ton and 1 ton with Dana rear axles 99 8003637 – Wt. 12.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

BRAKE TOOLS

STEERING PIVOT PIN REMOVER

A N D

Service tilt and telescoping steering columns on most domestic vehicles. 2990263 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H F) ONE MAN BRAKE BLEEDER

• Bleed brakes with no mess, includes a plastic bottle for collecting discharged fluid • Complete instructions included 99 2991081 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

G) DISC BRAKE CALIPER BOLT SOCKET SET

• Includes 3/8" and 8 mm hex bits for GM & 1/4" hex bit for Ford • 3 pc 3/8" dr. 99 2990196 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) BRAKE CYLINDER HONE

• Controlled pressure makes it possible to polish or hone with just one stone grit • Range from 27/32" to 2" 99 2914596 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT STONES 2918001 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

4.99

599

VACUUM PUMP and BRAKE KIT • All of the necessary adapters and hoses are included to perform vacuum tests and bleed brakes on domestic and import vehicles • Test all vacuum related engine systems including emissions control systems, fuel systems, air conditioner and heater systems, and other vacuum and pressure systems • Can be used on cars, trucks, boats, motorcycles, ATVs, snowmobiles, and more 99 8050832 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

217

H A N D

BRAKE TOOLS C

A D

T O O L S

A) DRUM BRAKE ADJUSTMENT TOOL

• Adjust star wheel by inserting tool through hole in backing plate • Different angles at ends for various makes and models 99 2922326 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) ONE-MAN BRAKE BLEEDER KIT

• Magnetic pad holds bottle to frame of vehicle • Includes a variety of adapters to fit all brakes • Will service calipers, wheel cylinders, and master cylinders 99 2990048 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) DISC BRAKE PAD SPREADER

Compresses disc brake piston for easy pad installation on most domestic, import cars, and light trucks. 99 2990006 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) BRAKE SPRING PLIERS

Double ended tool removes and installs brake springs including springs over anchor post. 2920619 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Offers 5 drive pin configurations to fit applications on most domestic and some import vehicles • Use with 3/8" drive tools • Rotates and depresses caliper pistons when changing brake pads 99 2990062 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) PARK BRAKE SPRING PLIERS

• Use to push back spring on park brake cable • Allows for easy removal or installation of park brake lever 8001165 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

H) 8 PC DISC BRAKE CALIPER SET

• 3/8" dr. socket end • Bit sizes: 4 hex: 1/4", 5/16", 3/8"; 8 mm; 4 torx: T-40, 45, 50, and 60 8007024 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

799

I) BRAKE PISTON SPREADER

899

• Chrome vanadium steel construction • Fits within brake caliper to push back brake pistons for brake pad installation 99 8031408 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) BRAKE SPRING WASHER TOOL

Removes and installs large and small brake shoe retaining spring washers. 2990007 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

F) DISC BRAKE PISTON TOOLS

EXHAUST TOOLS

J) EXHAUST MANIFOLD SPREADER

• For reinstalling the manifold on small block Chevy. • A simple way to expand a warped manifold so all bolt holes are accurately aligned • Helps prevent cross-threading of manifold bolts • Works best when used in pairs or install before removing manifold to prevent misalignment 99 2990032 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

K) TAIL PIPE EXPANDERS

218

• Straightens out clamp dents in mufflers and tail pipes • Extra long hex bar for easy turning 1-1/2" to 2-7/16" (38-62 mm) I.D. 2990125 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1/8" to 3-7/16" (54-87 mm) I.D. 2990124 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L) TAIL PIPE EXPANDER

• Use to remove clamp grooves and round out pipes • Fits most pipes 1-5/8" to 2-7/16" (41-62 mm) I.D. 2918951 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499 3999 3799

BEARING TOOLS

A) SEAL PULLER

• Insert tool tip behind grease/oil seal press and pull • 2 tips accommodate most applications 99 2990539 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) BEARING PACKER

• Use with either air or hand-operated grease guns • Bearing cap.: min. 3/8" I.D. max. 4" O.D. • Working height between cones 0 to 2" 99 2990027 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) BUSHING INSERT TOOL SET

Sixteen 2-step bushing inserting collars sizes from 3/8" x 7/16" to 1-1/4" x 1-3/8" 99 3411220 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

D) SEAL DRIVER SET

Contains 16 plastic adapters for up to 3-3/8" diameter seals. 2920260 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E F) BEARING RACE and SEAL DRIVER SET

9 aluminum collars: 1-1/2", 1-3/4", 2", 2-3/8", 2-1/2", 2-5/8", 2-3/4", 3", and 3-3/16". 2990317 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) BEARING and SEAL DRIVER SET

12 discs 5/8" to 2" dia. 8034833 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499 99

5999

A N D

T O O L S

BEARING PULLERS and SEPARATORS G) BEARING PULLER

• Designed to remove bearing from shafts • Fits many types of bearings including popular 6202 and 6203 • Capacity up to 2-1/8" dia. 99 2990008 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) BEARING SEPARATORS

• Knife-like edge grips gears, bearings, etc. • For spaces that puller jaws can't be hooked on • Capacity: 1/2" - 3" 2990103 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

I) 3-JAW BEARING PULLER

• Compact size fits where other pullers can’t • Hook jaw on bearing inner hole to lift from its seat • Capacity of inside dia.: 1/2" to 1-1/2" • Ideal for automotive flywheels, pump bearings, generator bearings, machine bearings 99 2927762 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BEARING TOOLS

J J) BEARING SEPARATOR KIT

• Contains 2 bearing separators and bolt sets • Capacity: 1" to 2" and 2" to 3" 2990135 – Wt. 12.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

9999

PULLERS M

K) UNIVERSAL BEARING PACKER

• Simply place the bearing between the plastic cones, tighten, and apply grease through the fitting on the end of threaded shaft • Forces out old grease to evenly inject new • Cone diameter is 5" 99 2928042 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

L) BEARING RACE and SEAL DRIVER

• Helps reduce damage to both race & axle housing • 6 disc sizes fit most bearing race sizes • Turn discs over to drive seals 99 2918514 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

M) STEERING WHEEL PULLER

• Universal puller for most makes and models • Screw pad protects end of steering shaft 2990199 – Wt 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

2599

N) HARMONIC BALANCER PULLER

Removes balancer without damaging pulley or shaft. 2918050 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3199

219

H A N D

T O O L S

BOLT-TYPE PULLER KITS 46 PIECE BOLT-TYPE PULLER KIT

Includes: 12 different bolt sizes, 3 pressure screw adapters, yoke, and washers. 99 2923480 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37 PC DELUXE BOLT-TYPE PULLER KIT 13 PIECE BOLT-TYPE PULLER KIT

Includes: 4 different bolt sizes, yoke, and pressure screw with pointed adapter. 99 2923019 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . .

• Designed for use on harmonic balancers, crank shaft pulleys, steering wheels, and gear pulleys • Can be used on tapped hole or flywheel on electric and 2cycle motors 99 2990314 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

POWER STEERING / ALTERNATOR PULLEY PULLERS B A

A) ADJUSTABLE JAW PULLEY PULLER

• Removes pressed on 1- or 2-groove alternator or power steering pulleys • Designed to allow jaws to be moved into 2 positions for most size alternators 99 2920143 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) PULLEY PULLER

• For Chrysler, Ford, GM, and VW vehicles • Also works on GM belt driven vacuum pumps on both gas and diesel powered vehicles • Fits pulleys with hub dia. of 1-1/8", 1-1/4", 1-5/16", 1-3/8" • Split collet design jaws grip the pulley flange for damage free removal 99 2990259 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) PULLEY PULLER/INSTALLER

Remove/install most power steering and alternator pulleys on late GM, Ford, and Chrysler engines. 99 2990177 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PULLERS E) STEERING WHEEL LOCK PLATE REMOVER

Fits all domestic lock plates including tilt and telescoping columns. 99 2990128 – Wt 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) TWIN LEG PULLER

• 1/2" female dr. with 1 cone tip, 1 flat tip, and 1 bottle of lubricating oil • Capacity: outer: 2-3/4" - 6-3/4" (70 - 170 mm), inner: 2" - 5-3/4" (50 - 145 mm) 99 2990200 – Wt 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G) 3 PC REAR AXLE BEARING PULLER

• Quickly removes semi-floating rear axle bearings • Fits standard slide hammers • 3 pullers fit I.D's of 1" to 1-7/8", 1-5/16" to 2-3/8", and 1-3/8" to 2-7/8" 8034824 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

H) SLIDE HAMMER KIT

H D) STEERING WHEEL PULLER

Universal design fits most vehicles. 2919652 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

599

• 22" long with 4-3/4 lb weight • Includes: 2- and 3-jaw internal and external gear puller, bearing and oil seal puller hook, dent puller hook, rear axle puller, locking plier adapter, and case 99 2990136 – Wt. 16.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 PC SEAL PULLER SET

220

• Ideal tool for all seals where shaft cannot easily be removed • A few hammer taps on tool back removes seals on automatic transmissions 8003574 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

FRONT END SERVICE SET

HARMONIC DAMPER PULLEY PULLER

• 3-jaw puller, lead screw, and 2 pins • Eliminates the need to remove the radiator before removal of pulley • Aids in the removal of harmonic damper pulleys on most Chrysler and Mitsubishi engines 8031355 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Drop forged heat treated • Removes most pitman arms, tie rod ends, and ball joints 99 8003685 – Wt. 11.6 lbs. . . . . . . . .

119

GEAR PULLERS • Chrome vanadium steel construction • Inside and outside reversible jaws • Ideal for pulling gears, pulleys, and flywheels 2-JAW PULLERS

FLYWHEEL PULLER

• For use on motorcycle flywheels and some A/C clutch hubs • 6 metric sizes – 5 right hand thread M10x1.25, M14x1.5, M16x1.5, M18x1.5, M24x1.0, and 1 left hand thread - M27x1.0 99 8006631 – Wt. 1.3 lbs. . . . . . . . . . . .

Size 3" 4" 6" 8"

ITEM 8046009 8046018 8046027 8046036

PRICE 9.99 11.99 15.99 29.99

ITEM 8045965 8045974 8045983 8045992

PRICE 11.99 14.99 24.99 34.99

5499

T O O L S

3-JAW PULLERS

Size 3" 4" 6" 8"

TECH TIP

Wt. (lbs.) 0.9 1.8 4.0 8.7

A N D

Wt. (lbs.) 1.4 2.3 5.8 4.1

CHROME PLATED DROP FORGED STEEL

Chrome vanadium is the added elements of chromium (Cr) and vanadium (V) into carbon steel for added hardness, tensile strength, and torque ability. Considered a step up from standard carbon steel. Chrome molybdenum, generally referred to as Chrome Moly. Chromium (Cr) and molybdenum (Mo) are added to the carbon steel. Hardness, strength, and torque ability are increased beyond that of Chrome vanadium steel.

Can also be adjusted to be a 2-jaw puller as well as a 3-jaw. Size Jaws Wt. (lbs.) ITEM PRICE 3" 2 or 3 1.3 2910324 19.99 4" 2 or 3 3.1 2910325 25.99 6" 2 or 3 3.7 2910326 32.99 Extra arm allows puller to be assembled as both a 2-jaw and a 3-jaw

HYDRAULIC GEAR PULLER KIT

• Multiple use gear puller uses hydraulic power to make pulling jobs much easier • Kit can be assembled in a variety of ways • Can be assembled as a bearing separator and as a 2- or 3-jaw puller with 4", 6", or 8" jaws • Pulling force of up to 12 tons • Comes with moulded case 99 1259993 – Wt. 37.4 lbs. . . . . . . . . . . . .

199

ASSEMBLED AS BEARING SEPARATOR

ASSEMBLED AS 2-JAW PULLER

221

GREASE & OIL

H A N D

GREASE FITTINGS

GREASE FITTING TOOLS GREASE FITTINGS – Pkg. of 5.

A) GREASE FITTING TOOLS

T O O L S

• Removes and installs grease fittings • Spiral extractor removes broken fittings SMALL

Tap repairs 1/4"-28 UNF threads, wrench removes 5/16" and 3/8" hex fittings & plugs 99 4270093 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

LARGE

Tap repairs 1/8"-27 NPT threads, wrench removes 7/16" and 3/8" hex fittings & plugs 99 4270094 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) ZERK CLEANING TOOL

• Clears grease fittings of hardened matter • Fits both straight and angled zerk style fittings • Fill with oil or grease, hold against zerk fitting, and strike with hammer to clear fitting 99 4270160 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Description Wt. (lbs.) 1/4" 28 Straight 0.1 1/4" 28 45° Angle 0.1 1/4" 28 90° Angle 0.1 1/4" 28 67-1/2° Angle 0.1 5/16" Drive-in Straight 0.1 3/16" Drive-in Straight 0.1 1/4" Drive-in Straight 0.1 1/8" Pipe Straight 0.1 1/8" Pipe 67-1/2° Angle 0.1 1/8" 90° Angle 0.1

ITEM PRICE 4270017 2.99 4270018 3.99 4270019 3.99 4270020 3.99 4270022 2.99 4270024 2.99 4270025 2.99 4270027 2.99 4270030 3.99 4270031 3.99

GREASE FITTING KIT

100 grease fittings in variety of sizes in straight, 45°, and 90° angles. 4270294 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3999

PRECISION OILER

GREASE INJECTOR TOOL

• Screw on cap • Pocket clip • O’all length: 5-5/8" • For the exact placement of oil or any other lubricant 8001660 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Max. working pressure: 3,000 PSI • 18-gauge tempered stainless steel needle • Easily inserts under or through bearing seals • For use with hand grease guns only • Includes protective cover 4270204 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

299

GREASE GUNS C) LEVER GREASE GUN

• 3 way load; uses standard 14 oz. cartridge • Bulk cap.: 400 cc 4274106 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

D) MINI GRIP GREASE GUN

Can hold up to 120 cc bulk, or 3 oz. cartridge. 4274122 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

E) PISTOL GRIP GREASE GUN

• 3-way load; uses standard 14 oz. cartridge • Bulk cap. 400 cc 4274114 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

F) AIR OPERATED GREASE GUN

• 1-handed grease gun delivers 1,500 to 6,000 PSI each time the trigger is pressed (when attached to a compressed air supply of 30 to 150 lbs.) • 3-way load: bulk, cartridge, or dispenser • Vent cap • Equipped with both a metal and flexible spout • Handle threaded for 1/4" NPT air fitting 99 4270328 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G) COMBINATION GREASE GUN

222

• Kit includes an air operated grease gun and a lever action gun head to use when there is no air supply • 3-way load: cartridge, bulk, or dispenser • Flexible and metal spouts included • 1/4" NPT air coupler, plug, barb adapter 99 8003180 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GREASE GUN HOSE

A A) FLEXIBLE GREASE GUN HOSE

• Threaded at both ends • Max. 3,500 PSI Length Wt. (lbs.) 18" 0.2 24" 0.3

GREASE

ITEM 4270089 4270090

PRICE 5.99 6.99

B) FLEXIBLE GREASE GUN HOSE

• Threaded at one end • Grease fitting coupler at other end Length Wt. (lbs.) ITEM 9" 0.2 4270039 18" 0.2 4270047

PRICE 5.99 9.99

C) REPLACEMENT GREASE FITTING COUPLER 4273074 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 3.49

METAL OIL CANS

RED MAX GREASE

• Multi-purpose aluminum complex grease • Returns to original consistency even after being subjected to temperatures beyond its melting point (260°C (500°F) dropping point) • Offers extreme pressure and anti-rust, oxidant, wear and scuff properties • Applications include 5th wheels, U-joints, king pin and ball joints, torque arms, logging and transport trucks, and earth moving equipment 49 8001936 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

SILVER MAX MOLY/LITHIUM GREASE

• Molybdenum/lithium complex grease • Recommended for equipment subjected to heavy shock loading, on slow oscillating or reciprocating bearings • Ideal for applications requiring a stable lubricating ability over long periods of heavy use • Applications include on and off-road equipment, construction and mining equipment, 5th wheels, and general industrial applications 49 8001937 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

A N D

T O O L S

BLUE MAX LITHIUM GREASE

• Brass pump • Flexible hose Size 6 oz. (200 ml) 16 oz. (500 ml) 34 oz. (1,000 ml)

Wt. (lbs.) 0.4 0.7 0.9

ITEM PRICE 4270014 5.99 8035495 6.99 4270016 13.99

• Multi-purpose lithium complex • Extreme pressure and anti-wear properties • Applications include chassis lubrication, high and low speed wheel bearings, universal joints, and general industrial, construction and mining applications 49 8001938 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

SUCTION GUNS

TRANSFER PUMP D

E D) METAL SUCTION GUN

• Dual action transfer pump • 16 oz. (500 ml) per stroke • Two 3/8" x 48" hoses 4270185 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

16 oz. (500 ml) capacity. 4270073 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

E) PLASTIC SUCTION GUN

1999

16 oz. (500 ml) capacity. 8025521 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

FUNNELS

F) 9-1/2" PLASTIC FUNNEL

9-3/4" tall 8007462 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

G) 6" METAL FUNNEL

12" long flexible spout. 8035501 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

H) 6" PLASTIC FUNNEL with HANDLE

• 1-1/2 quart capacity • Flexible 13" spout and 24" tubing 4270167 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

223

SCREWDRIVERS

H A N D

SCREWDRIVER SETS

Made with durable chrome vanadium steel 2 PC SET

Phillips and slotted with pocket clip. 8034325 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

149

6 PC SET

• 4 slotted and 2 Phillips • Storage rack mounts on wall 8034361 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

6 PC SET with SOFT COMFORT GRIP HANDLES

• Magnetic tips • 3 slotted and 3 Phillips 8034245 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

O O L S

8 PC SET

13 PC SET

• 5 Phillips and 8 slotted magnetic tipped screwdrivers, 1 with screw holder • Rubber cushion grip for greater comfort and turning torque 99 99 8034334 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1299

5 slotted and 3 Phillips. 8034389 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

8 PC SET with SOFT COMFORT GRIP HANDLES

5 slotted and 3 Phillips. 8011162 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

22 PC SCREWDRIVER SET

• Comfort handle for extra torque • 2 slotted, 3 Phillips, 4 square, and 1 awl 8034254 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

3 slotted with hex bolster, 1 slotted with screw • Moulded grip handles holder, 6 slotted, 5 Phillips (2 with hex bolster), 5 • 12 slotted, 1 with screw holder Torx, 1 awl, and 1 tack puller. 99 • 8 Phillips tips 8034316 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 8034343 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

18" SLOTTED 2920481 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 24" SLOTTED 8002944 – Wt. 1.2 lbs.

549 99 .......................... 7

1" dia. x 1-3/8" long. Wt. 0.1 lbs.

8034272 – Phillips: #1 and #2 8034281 – Slotted: 3/16" and 1/4" 8034290 – Torx: T-15 and T-20 . . . . . . . . . . . . .

MOBILE PHONE REPAIR KIT

HEX BOLSTER

For Ericsson, Nokia, and Motorola phones. Multiple drivers allow access to tamper resistant type screw heads and chassis. 2920878 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . B

• Neon orange handle • Chrome vanadium 1/4" steel shanks with hex bolsters Style Size Wt. (lbs.) ITEM PRICE A Slotted 1/4" 0.2 8003109 3.99 B Square #1 x 4" 0.2 8003111 3.99 B Square #2 x 4" 0.2 8003112 3.99 B Square #3 x 4" 0.2 8003113 3.99 C Phillips* #1 x 3" 0.1 8003133 3.99 C Phillips* #2 x 4" 0.2 8003139 3.99 C Phillips* #2 x 4" 0.2 8003145 3.99 * 3/16" shank with no hex bolster.

2499

STUBBY MINI SCREWDRIVERS

SCREWDRIVERS

1999

20 PC SET (SHOWN)

LARGE SCREWDRIVERS

224

10 PC SET

149/pr.

1499

14-IN-1 MAGNETIC PRECISION SCREWDRIVER KIT

• High quality nickel chrome molybdenum • Double ended magnetic tip bits • Includes: Torx T-6, T-7, T-8, T-10, T-15, and T-20; Phillips #00, #0, and #1; slotted 2, 3, and 4 mm • Rotating cap allows for one-handed operation • Handy storage case 99 2920591 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

PRECISION SCREWDRIVERS

A) 6 PC SET

A N D

• Slotted sizes: 1.0, 1.6, 2.4, and 3 mm • Phillips sizes: #0 and #1 2910180 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

B) 6 PC SET

• 3 slotted and 3 Phillips screwdrivers • Screwdrivers measure 6", 7", and 9" long 2920242 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

C) 16 PC SET

• 6 slotted: 1, 1.4, 2, 2.4, 3, 3.8 • 4 Phillips: #1-1, #1-2, #1, #0-2 • 3 hex keys: 1.5, 2.0, 2.5 mm • 3 nut drivers: 3, 4 and 5 mm • Cross bar for extra leverage 2922847 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

D) 15 PC SET

• 5 slotted, 4 Phillips, and 6 Torx • 4-3/4" long 2920360 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

MULTI-DRIVER SCREWDRIVERS

E) 2 PC SCREWDRIVER SET

• With screw holding clips • #0 Phillips and 3/16" slotted bits 8034370 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

O O L S

F) 11 PC MAGNETIC DRIVER SET

3 Phillips bits; 2 Torx bits: T-15 and T-20; 3 slotted bits: 1/8" to 5/16" and 3 Pozidrive bits. 99 8034398 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) 8 WAY SCREWDRIVER

4 double ended bits: Phillips #1, #2; slotted 3/16", 1/4"; Torx T-15 and T-20; square #1, #2. 99 8034218 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H) 34 PC SCREWDRIVER and BIT SET

• 7 regular and 7 precision screwdrivers • “T” handle driver for bits • Fourteen 1" bits • Five 1/4" dr. sockets 2920904 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

WIRE STRIPPER and SCREWDRIVER

POCKET SCREWDRIVER • Reversible shaft for #1 Phillips or 3/16" slotted • Pocket clip 8016309 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Industrial plastic handle, aluminum alloy tubing with 1/4" hex magnetic bit holder • Chrome moly screwdriver bits • 1/4" drive hex adapter, rubber bits holder • Removes/strips all common co-axial 4.8 mm to 7.5 mm dia. wire and 10 to 20 AWG stranded and solid conductors • Side cutters for flexible 10 AWG (6.0 mm2) conductors and 12 AWG (4.0 mm2) solid conductors • Includes 1/8", 3/16", and 1/4" slotted bits as well as #1, #2, and #3 phone bits 99 8003790 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

12 PC SCREWDRIVER

Includes: 1 slotted, 3 Phillips, 4 square, 2 hex keys, and 1 awl. 99 8005188 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

225

OFFSET SCREWDRIVER SETS A) 3 PC OFFSET SCREWDRIVER SET

A N D

• Sizes: # 1 Phillips x 3/16" slotted, #2 Phillips x 1/4" slotted, #3 Phillips x 5/16" slotted • Lengths: 4-1/4", 4-1/2", and 6-3/4" 8034263 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B

Contains: offset handle, 1/4" socket adapter, 4 sockets sizes 4, 6, 8, and 10 mm, 6 double-ended bits in popular sizes of Phillips, slotted, Torx, and Pozidriv. 99 8034405 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

OFFSET RATCHET SETS

T O O L S

299

B) 12 PC OFFSET SCREWDRIVER SET

C) 10 PC OFFSET RATCHET SET

• 3 slotted 3/16", 7/32", 1/4" • 2 Phillips #1 and #2 • 2 Posidriv #1 and #2 • 2 Torx T-10 and T-15 • One 1/4" socket adapter 8002017 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

D) 3 PC OFFSET RATCHET SET

• High torque reversible offset ratchet with 1/4" drive head and bit holder • Two S2 steel bits: 3/16" slotted and #2 Phillips 99 8024274 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E) 17 PC OFFSET RATCHET SET

• 1/4" square x 1/4" hex head • 6 sockets: 5/32", 3/16", 1/4", 9/32", 5/16", 3/8" • 10 bits: four Torx T-10, 15, 20, 25; two slotted 3/16" and 1/4"; two Phillips #1 and #2; two Pozidriv #1 and #2 99 8002016 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) 42 PC OFFSET RATCHET DRIVER

• Reversible offset ratchet with quick release • 31 bits: eight hex bits: 3, 4, 5, 6 mm and 3/32", 5/32", 3/16", 1/4"; four square bits: #0, 1, 2, 3; four Pozidriv bits: #0, 1, 2, 3; four Phillips bits: #0, 1, 2, 3; four slotted bits: 3, 4, 5, 7 mm; and seven Torx bits : T-10, T-15, T-20, T-25, T-27, T-30, and T-40 • Eight 1/4" dr. sockets: 6, 7, 8, 9, 10, 11, 12, 13 mm • Socket adapter and magnetic bit holder 99 2920892 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RATCHETING SCREWDRIVERS G) 7 PC RATCHETING SCREWDRIVER SET

• High torque 2-way ratchet handle • Includes 6 bits: 3 Phillips #1, 2, and 3, and 3 slotted 1/8", 3/16", and 1/4" 99 8045144 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H) EXTENDIBLE RATCHETING SCREWDRIVER

• 1/4 lb. cap. magnetic head • Retracted length: 1-5/16", extended length: 7" • Includes 6 bits: 2 slotted 3/16", 1/4", 2 Phillips #1, 2, and 2 Torx T-10, T-15 99 8045206 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I) 21 PC RATCHETING SCREWDRIVER and SOCKET SET

226

• Screwdriver with quick chuck has ratchet and standard screwdriver settings • 7" long bits eliminate need for bit extension • Quick chuck locks bit in handle at 1", 3", and 5" intervals • Double ended bits include: T-10 x T-15, T-20 x T-25, T-30 x T-40 Torx; #0 x #1, #2 x #3 Square; 4 x 5.5 mm, 4.5 x 6.5 mm Slotted, 3 x 4 mm, 5 x 6 mm Hex; #1 x #2 Phillips • Socket adapter and bit material is power bit quality S2 steel • 1/4" drive sockets are chrome vanadium steel construction • Sockets include: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2" 99 8056505 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RATCHETING SCREWDRIVERS A) MINI TORQUE RATCHET SCREWDRIVER SET

• Ratchet and standard screwdriver settings • Includes: 1 slotted, 2 Phillips, & 3 square bits 2920630 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

B) HIGH TORQUE RATCHET SCREWDRIVER SET

• Ratchet and standard screwdriver settings • Includes: 2 slotted, 3 Phillips, 4 square bits, and T-15 torx bit • Features screw finder/holder 99 2920631 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A N D

35 PC RATCHET SET • Includes: ratchet screwdriver, 1/4" adapter, magnetic bit holder, and moulded plastic case • Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", and 4 to 10 mm • Screwdriver bits: 3/16" and 1/4" slotted, 0, 1, 2, and 3 Phillips, #0, #1, #2, and #3 square, T-10, T-15, and T-20 Torx; 5/64", 3/32", 7/64", 1/8", and 5/32" Allen • Carrying case 99 2920655 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

IMPACT DRIVERS • Driver, 5/16" hex bit adapter, 2 slotted, and 2 Phillips bits. • Adapter can be removed to allow use with sockets • Reversible action to loosen or tighten fasteners C) 3/8" DRIVE 3410602 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 1/2" DRIVE 8031248 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9 1499 99

IMPACT DRIVER BIT SET (NOT SHOWN)

Fits 3410602 and 8031248. 8031220 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

349

22 PC SCREWDRIVER BIT SET • S2 steel • Magnetic bit holder with belt clip • Contents: 3 Phillips #1, 2, and 3 3 square #1, 2, and 3 3 slotted 4-1/2", 5-1/2", and 6-1/2"4 hex 3, 4, 5, and 6 mm 7 Torx T-10, T-15, T-20, T-25, T-27, T-30, and T-40 • 1/4" dr. hex adapter with vinyl bit • Suitable for power screwdriver use 99 8000945 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33 PC SCREWDRIVER BIT SETS

BIT SETS with 3/8" MAGNETIC CHUCK

REGULAR BITS

• 3 pc square bits: #1, 2, 3 • 4 pc Phillips bits: #0, 1, 2, 3 • 4 pc slotted bits: 1/8", 5/32", 3/16", 1/4" • 6 pc hex bits: 5/32", 9/64", 1/8", 7/64", 3/32", 5/64" • 6 pc metric hex bits: 2, 2.5, 3, 4, 5, 6 mm • 9 pc Torx bits: T-8 to T-40 • Magnetic bit holder 99 8017031 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

SECURITY BITS

• 9 Torx bits: T-8 to T-40 • 12 hex bits: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"; 2, 2.5, 3, 4, 5, and 6 mm • 4 tri-wing bits: #1, 2, 3, and 4 • 4 spanner bits: #4, 6, 8, and 10 • 3 torq bits: #6, 8, and 10 • Magnetic bit holder 99 2920513 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9 PC SET

9 1/4" hex shank bits: 3 Phillips #1, 2, 3; 3 Square #1, 2, 3; 3 hex bits 4, 5, and 6 mm. 99 8031523 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

30 PC SET

Thirty 1/4" hex shank 1" bits, S2 steel: 3 Phillips bits #1, 2, 3; 3 Pozidrive bits #1, 2, 3, 5; slotted bits 3.5, 4.5, 5.5, 6.5, and 8 mm; 7 hex bits 2, 3, 4, 5, 6, 7, and 8 mm; 2 square bits #1 and 2; 10 tamper proof Torx bits T-7 to T-40. 99 8031514 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

227

H A N D

T O O L S

33 PC SECURITY SOCKET BIT SET • 9 tamper proof Torx bits T-10 to T-45 • 12 tamper proof hex bits 2, 2.5, 3, 4, 5, 6 mm, 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" • 4 tri wing bits #1, 2, 3, 4 • 3 Torq bits 6, 8, 10 mm • Metal case 8034799 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

6" BIT SET

SCREWDRIVER BITS Wt. 0.1 lbs.

• 3 Phillips head, 1 slotted • Easily reach hard to get areas • Fits standard bit drivers, drills, etc. 8015701 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

BIT HOLDER

Qty. 2 2 2 2 2 2

ITEM 3412434 3412442 3412491 3412509 3412517 3412525

PRICE 1.99 1.99 1.99 1.99 1.99 1.99

POWER BITS

• Holds 32 screw bits for cordless or power drills and screwdrivers • Easily view and keep bits from getting lost • O’all dim.: 1-7/8" x 2-5/8" x 1-1/4" 3410240 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

12" BIT HOLDER with C-RING

• Non-magnetic clip style bit holder, ideal for use in applications sensitive to magnetic fields, such as computers, electronics, etc. • Holds 1/4" hex shank bits 99 8021348 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

5 PC QUICK CLUTCH CHUCK

• Comes with 2 Phillips and 2 slotted bits • Adjustable depth control • 1/4" hex shank 3410085 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

228

Type #1 Phillips #2 Phillips #0 Square #1 Square #2 Square #3 Square

TYPE Length Qty. ITEM PRICE #1 Phillips 3" 1 3417607 1.99 #2 Phillips 3" 1 3417615 1.99 #1 Square 3" 1 3417631 1.99 #2 Square 3" 1 3417649 1.99 #3 Square 3" 1 3417656 1.99 #1 Phillips 6" 1 3417664 4.99 #2 Phillips 6" 1 3417672 4.99 #1 Square 6" 1 3417698 4.99 #2 Square 6" 1 3417706 4.99

QUICK CHUCKS B A • Bits quickly and easily snap in place • Non-magnetic, ideal for use in applications sensitive to magnetic fields, such as computers, electronics, etc. • 1/4" hex shank, chrome vanadium construction A) 2-3/8" LONG 8021071 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

B) 6" LONG 8021080 – Wt. 0.2 lbs.

399 99 .......................... 7

PRECISION TAMPER PROOF TORX KEY SET

6 PC TORX SCREWDRIVER SET

• Sizes: T-4, T-5, T-6, T-7, T-8, and T-9 • Chrome moly steel • O’all length: 3" 8027020 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Sizes: T-10, T-15, T-20, T-25, T-30, and T-40 • Magnetic tip • Chrome vanadium steel blade 2920902 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

1199

TORX BITS

A) 7 PC TAMPER PROOF TORX BIT SET

• 1/4" hex shank, 1" length. • Heavy duty S2 tool steel • T-7 to T-25 8024283 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

A N D

399

B) 9 PC TORX BIT SET

• T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, and T-50 • S2 steel 99 8001049 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) 8 PC FOLDING TORX WRENCHES

Sizes: T-9 to T-40. 2920181 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) 8 PC TORX BIT SET

E) 11 PC TORX SOCKET SET

• 1/4" and 3/8" drives • Sizes: T-10 to T-50 • Heavy duty S2 tool steel construction 8037019 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Contains: five 1/4" drive sockets sizes: E-4 to E-8; four 3/8" drive sockets sizes: E-10 to E-16, and socket holder. 99 8001053 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

TORX SETS F) TAMPER RESISTANT TORX BIT SET

Fits tamper-resistant Torx fasteners found on radio mountings, exterior mirrors, carburetors, and other applications; 7 insert bits sizes: T-10 to T-40; one 1/4" dr. bit holder. 99 2922086 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

INDIVIDUAL TORX BITS

Size T-50 T-55 T-60

Wt. (lbs.) 0.1 0.1 0.2

ITEM 2944122 2944130 2922342

PRICE 5.99 5.99 7.99

HEX KEY SETS

O O L S

G) 7 PC TORX SOCKET SET

Contains: three 1/4" dr. sizes: E-6, E-7, E-8, and four 3/8" dr. sizes: E-10, E-12, E-14, E-16. 99 2944148 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

I) 9 PC METRIC BALL END HEX KEY SET

• S2 steel construction • Contains: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm LONG BALL END 2920730 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . EXTRA LONG BALL END 2920732 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . I) 13 PC SAE BALL END HEX KEY SET

BALL END HEX KEY SETS

1199 1399

• S2 steel construction • Contains: 0.05", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8" LONG BALL END 8008602 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . EXTRA LONG BALL END 8008586 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

J) 7 PC BALL END HEX KEY SOCKETS with HOLDER

Ball end hex keys allow driving at angles. H) BALL END HEX KEY SETS with HOLDER SAE: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8". 2920037 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 2.5, 3, 4, 5, 8, and 10 mm. 2920038 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1499 1799

799 799

3/8" driver provides full torque leverage in areas with restricted access. SAE: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 8016791 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 3, 4, 5, 6, 7, 8, and 10 mm. 8016782 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499 1499

9 PC HEX SOCKET SET SAE SET

3/16", 7/32", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8", and 3/4". 8045171 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

METRIC SET

5, 6, 7, 8, 10, 12, 14, 17, and 19 mm. 8045162 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

Comes with socket rail.

229

HEX KEY SETS

A N D

O O L S

• 12 long arm SAE sizes: 1/16" to 3/8" • 13 short arm metric sizes: 1.5 to 10 mm 2919330 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

C) 11 PC HEX KEY and TORX DRIVE SET

• 9 hex keys: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", and 1/4", • 2 Torx drives T-15 and T-20 99 2919819 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) 25 PC HEX KEY SET

D) 6 PC JUMBO HEX KEY SETS

A) 10 PC RING STYLE HEX KEY SETS SAE: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32",

Chrome vanadium steel with black finish.

1/4", 5/16", and 3/8". 2922250 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, and 10 mm. 2922243 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Sizes: 3/8", 7/16", 1/2", 9/16", 5/8", and 3/4". 8018584 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SAE

299

1999

METRIC

299

Sizes: 8, 10, 12, 14, 17, and 19 mm. 8018619 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

7 PC HEX BIT SOCKETS • 3/8" square drive • High strength heat-treated alloy steel bits are securely broached into chrome plated socket bodies • Convenient vinyl storage holder SAE: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 99 2920412 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 3, 4, 5, 6, 7, 8, and 10 mm. 99 2920413 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29 29

ERGO-FOLD KEY SETS

HEX KEY SETS

H F E I

G H) 9 PC METRIC HEX KEY SETS (BLUE)

• Heat treated chrome alloy steel • Composite grip handle shaped for improved ergonomics E) SAE SETS (RED) 7 PC

Sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", and 1/4". 99 8005575 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 PC

Sizes: 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 8005573 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) 7 PC METRIC SET (BLUE)

Sizes: 2, 2.5, 3, 4, 5, 6, 8, and 10 mm. 8005574 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

G) 8 PC TORX KEY SET (GREEN)

230

Sizes: T-8, T-10, T-15, T-20, T-25, T-27, T-30, and T-40. 8005578 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1399

Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm Style Wt. (lbs.) ITEM PRICE Short 0.6 8005564 7.99 Long 0.8 8005567 9.99 Ball End* 0.8 8005569 13.99 I) 13 PC SAE HEX KEY SETS (RED)

Sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", and 1/2" Style Wt. (lbs.) ITEM PRICE Short 0.6 8005566 8.99 Long 0.9 8005568 10.99 Ball End* 0.9 8005572 15.99 * Ball end key turns 360° up to an angle of 35°.

T-HANDLE HEX KEY SETS

• 1-piece loop handle for extra strength • Cushion grip for extra comfort • 6" shaft

A N D

6 PC METRIC SET (BLUE)

• Sizes 2, 2.5, 3, 4, 5 and 6 mm 8005576 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

8 PC SAE SET (RED)

• Sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", and 1/4" 99 8005577 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CLAMPS

C-CLAMPS

C-CLAMPS Opening Wt. ITEM PRICE a b (lbs.) 2" 1" 0.2 2912384 3.69 3" 2" 0.7 2912392 7.49 4" 3" 1.6 2912400 11.99 6" 3" 2.5 2912418 13.99 8" 3" 3.7 2912426 19.99

Opening Wt ITEM PRICE a b (lbs.) 2" 1" 0.4 2910503 2.49 3" 1-1/2" 0.5 2910278 2.99 4" 1-1/2" 1.0 2910511 3.99 5" 2" 1.3 2910279 4.99 6" 2-3/4" 2.0 2910529 5.99 8" 3-1/4" 3.1 2920555 8.99 10" 3-1/8" 4.7 2920556 12.99

O O L S

SPRING CLAMPS A) 1" SPRING CLAMP

• Non-slip jaws • Poly vinyl protected handles and jaw tips 8041647 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

249

B) 2" SPRING CLAMP

Specially shaped to accommodate round objects. 2910750 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

SPRING CLAMPS C) SPRING CLAMPS

With vinyl covered handles. 4" CLAMP

1-1/2" jaw opening. 2925287 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

149/ea.

6" CLAMP

2-1/2" jaw opening. 2925295 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

199/ea.

• Vinyl coated tips and handles • Strong spring 2910068 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

249/set

D) 4 PC 4" SPRING CLAMP SET

1-1/2" jaw opening. 2920019 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

D) 4 PC 2" MINI SPRING CLAMP SET

449/set

E) FLEX JAW CLAMPS

Size (a & b) Length Wt. (lbs.) ITEM PRICE 1" 4" 0.1 2920040 1.99 2" 6" 0.3 2920005 2.49 3" 9" 0.3 2920041 3.99

QUICK RELEASE RATCHETING BAR CLAMPS 6" CLAMP 8002843 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 12" CLAMP 8002139 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 24" CLAMP 8002140 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699 999 1499

REVERSED

Reversible jaws switch between clamp and spreader.

231

H A N D

60" DEEP REACH BAR CLAMP

• Lightweight aluminum construction • Enamel finished 3" deep jaws • Quick release rear jaw • Bar has 1" spaced positive jaw stops 8016844 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

BAR and PIPE CLAMPS

STEEL BAR CLAMP FIXTURE

• Use ordinary 3/4" black pipe as bar • No holes, notches or rivets required to assemble • Multiple disc clutch grips bar automatically at any point • Clamp face is 1-3/4" square 99 2912459 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HEAVY DUTY ADJUSTABLE BAR CLAMPS

O O L S

A • Load limit: 1,000 lbs. • Throat depth: 3" • Multiple clutch discs hold securely along the bar • Solid maple handle and soft durable plastic pads

B A) BAR CLAMPS

Opening 6" 12" 18" 24" 30" 36"

Wt. (lbs.) 1.2 1.5 1.6 1.9 2.2 2.3

ITEM 2910348 2910966 2910349 2910982 2910350 2910351

PRICE 4.49 4.99 5.49 5.99 6.99 7.99

B) STEEL PIPE CLAMPS

6" CLAMP 8041889 – Wt. 2.6 lbs. 12" CLAMP 8041852 – Wt. 3.1 lbs. 24" CLAMP 8041825 – Wt. 4.1 lbs. 36" CLAMP 8041656 – Wt. 5.1 lbs.

1599 99 . . . . . . . . . . . . . . . . . . . . . . . . 17 99 . . . . . . . . . . . . . . . . . . . . . . . . 21 99 . . . . . . . . . . . . . . . . . . . . . . . . 24 ........................

ADJUSTABLE SUPPORT ROD

• Make your own clamp length • Use ordinary 1/2" or 3/4" black pipe with standard pipe threads on both ends 1/2" PIPE CLAMP 2910074 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4" PIPE CLAMP 2910075 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699 899

LOCKING PLIERS & CLAMPS

• Ideal for large spaces where you need an extra hand • Height adjusts 5 ft. 3" to 9 ft. 5" (160 to 290 cm) • Supports 110 lbs. at vertical and 55 lbs. at 45° • Ratchet mechanism 99 8026824 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

LOCKING CLAMPS

C) 11" LOCKING C-CLAMP

• Jaw adjustment: 0 - 4" • Throat depth: 2-5/8" 2911790 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

LIFETIME WARRANTY

99 D) 11" LOCKING C-CLAMP with SWIVEL PADS

C) 18" LOCKING C-CLAMP

• Jaw adjustment: 0 - 7-1/2" • Throat depth: 9-1/2" 2920624 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4499

232

2499

E) 9" LOCKING CHAIN CLAMP

D) 9" LOCKING C-CLAMP with SWIVEL PADS

• Jaw adjustment: 0 - 4-1/2" • Throat depth: 4-3/4" 2920625 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Jaw adjustment: 0 - 3-7/8" • Throat depth: 2-5/8" 2919298 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Holds and locks around any shape and size • 18" chain 2910023 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3599

LOCKING PLIERS

LIFETIME WARRANTY

• Built tough to last a lifetime • High grade alloy steel heat treated for maximum toughness and durability

D) LONG NOSE LOCKING PLIERS with WIRE CUTTER

• Jaw curve permits user to put tremendous pressure on 4 points of any style nut or bolt head • Jaw adjustment: 0 to 1-7/8" 99 2911733 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Long straight nose allows for use in narrow spaces not reachable by curved or straight jaws • Cuts up to 1/4" bolt Size Jaw Adjustment Wt. (lbs.) ITEM PRICE 4" 0 - 1-5/8" 0.2 8030533 12.99 6" 0 - 2-1/4" 0.4 2917052 15.99 9" 0 - 2-7/8" 0.8 2918613 18.99

B) 10" STRAIGHT JAW LOCKING PLIERS

E) 12" LARGE JAW LOCKING PLIERS

• Straight jaws allow for maximum contact on flat, square or hex work • Jaw adjustment: 0 to 1-5/8" 99 2911725 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Heavy duty jaw grips around work of all shapes • Jaw adjustment: 0 - 3-1/8" 99 2925451 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A) 10" CURVED JAW LOCKING PLIERS

14 15

C) CURVED JAW LOCKING PLIERS with WIRE CUTTER

Cuts up to 1/4" bolt. Size Jaw Adjustment Wt. (lbs.) ITEM PRICE 5" 0 - 1-1/4" 0.4 2911766 11.99 7" 0 - 1-5/8" 0.8 2911758 12.99 10" 0 - 1-7/8" 1.2 2911741 13.99

A N D

F) LOCKING WRENCH

• Locks on 3 sides of a nut and will not slip or mar • Wire cutter built into pliers Size Range Wt. (lbs.) ITEM PRICE 7" 7/16" to 3/4" 0.9 2910067 15.99 11 to 19 mm 10" 5/8" to 1-1/8" 1.4 2910070 19.99 16 to 28 mm

T O O L S

LOCKING PLIERS G

G) LONG NOSE LOCKING PLIERS

With wire cutters. Size Wt. (lbs.) 5" 0.4 7" 0.7 10" 1.1

ITEM 8028975 8028984 8028993

PRICE 4.99 5.99 7.99

H) 10" SHEET METAL CLAMP

Jaws are 3-3/4"wide. 2919710 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

I) LOCKING C-CLAMP PLIERS

Size Adjusts

Inner Wt. ITEM PRICE Dia. (lbs.) 11" 0-3-1/2" 3"x3-3/4" 1.5 2919538 7.99 18" 0"-7" 9-3/4"x4" 2.7 2919736 12.99 J) INDIVIDUAL CURVED JAW LOCKING PLIERS

With wire cutters. Size Wt. (lbs.) 5" 0.3 7" 0.8 10" 1.2

ITEM 2920916 2920915 2920914

PRICE 4.99 5.99 6.99

K) INDIVIDUAL STRAIGHT JAW LOCKING PLIERS

With wire cutter. Size Wt. (lbs.) 5" 0.3 7" 0.8 10" 1.2

ITEM 2920911 2920912 2920913

PRICE 4.99 5.99 6.99

L) 9" LOCKING CHAIN WRENCH

18" chain. 2920908 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

M) LOCKING BAR CLAMP PLIER

6-1/2" jaw cap. with 3" throat depth. 2920683 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

233

LOCKING WELDING CLAMP PLIERS

A N D

9" WELDING CLAMP

Jaws open 1-5/8". 2920783 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

14" WELDING CLAMP

Jaws open 2-3/4". 2920685 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

PLIERS

EXTRA LONG PLIERS

O O L S

C A) 11" OFFSET DIAGONAL CUTTING PLIERS

Cutters are curved at a 30° angle. 2920168 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199 B) 11" 45° BENT NOSE 99 2925543 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 11 C) 11" LONG NOSE 99 2925527 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 11 D) 11" 90° BENT NOSE

G F

Non-slip cushioned grips. 2925550 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199 1199 F) 11" HOSE/CABLE PLIERS 99 2990148 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 11 G) 16" STRAIGHT NOSE 99 2920270 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 12 E) 11" 15° OFFSET NOSE 2925568 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

NON-SLIP CUSHIONED GRIP PLIERS Wt. (lbs.) 7" End Nipper 0.6 6-1/2" Long Nose Cutting 0.3 8" Long Nose 0.5 6" Diagonal Cutting 0.5 7-1/2" Diagonal Cutting 0.6 Type

I J K K

PRICE 5.99 5.99 5.99 5.99 5.99

MINI-PLIERS

Plier Type

Wt. (lbs.) 0.2 M 5-1/2" Diagonal 0.2 N 7" Needle Nose 0.2 O 7" 45° Bent Nose 0.2 L 5-1/2" End Nippers

ITEM 2929537 2929594 2929602 2929610 2929545

ITEM PRICE 2920192 6.99 2920188 6.99 2920195 6.99 2920128 6.99

WIRE TWISTER

234

• Gives a perfect, uniform twist every time in a continuous one-hand operation • Ratcheting action eliminates need to shift hands • No pushing necessary • Lock has automatic squeeze release 99 2919025 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PLIERS A) SLIP JOINT PLIERS

Size 6" 8" 10"

Wt (lbs.) 0.4 0.5 0.8

ITEM 2927853 2927861 2922664

PRICE 3.99 4.99 5.99

B) 8" LINESMAN PLIERS 2929586 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

A N D

C) 11-3/4" LARGE GRIP PLIERS

• Non-slip, cushion grip handles • Approx. range: 2 to 4" 2920454 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999 1199 E) 9-1/2" CABLE CUTTER 99 2910196 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 7 D) 12" LINESMAN PLIERS 2920873 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

F) GROOVE JOINT PLIERS

Size 8" 10" 12" 16" 20"

# of Jaw Wt. (lbs.) Adjustments 4 0.6 5 0.9 6 1.1 8 3.1 – 3.8

ITEM

PRICE

8001631 8001632 8001633 8001634 8001637

4.99 6.99 8.99 19.99 39.99

T O O L S

PLIERS G) 7" DIAGONAL CUTTING PLIERS 2922615 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) 9-1/2" NUTBUSTER™ PLIERS

2099

1-1/8" jaw capacity. 2929073 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

I) 7-3/4" CURVED DIAGONAL CUTTING PLIERS 2929107 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2699

J) TONGUE AND GROOVE PLIERS

Length No. of Jaw Wt. ITEM PRICE Adj. Capacity (lbs.) 9-1/2" 5 1-1/2" 0.8 2926285 17.49 10" 7 2" 1.0 2926293 17.99 12" 7 2-1/4" 1.3 2926301 19.99 16" 8 4-1/4" 2.8 2926319 34.99

SPORTSMAN’S PLIERS • Stainless steel • Built-in cutter • O’all length: 8" 2920123 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

SAFETY

1099

10" DURAPLIERS

• Laminated/riveted construction • Texture air cushioned grip provides excellent comfort • Box joint design reduces slippage compared to conventional tongue and groove pliers • Multiple position jaw provides flexibility for a wide range of applications • Jaw cap.: 1-3/4" 2920422 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

Stay safe in the workplace. Princess Auto carries a wide variety of safety products. From gloves to glasses, hearing protection to hard hats, we've got what you need to protect yourself from injury. See our Safety section, pages 157 to 203.

235

RETAINING RING PLIERS

H A N D

SNAP RING PLIERS

A) COMBINATION INTERNAL/EXTERNAL SNAP RING PLIERS

• Reversing lever makes switching between internal and external use quick and easy • Includes 4 sets of tips: 0.045" and 0.060" straight, 0.045" 45°, and 0.035" 90° 99 2970166 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) LOCK RING PLIERS

T O O L S

• For removing and installing all types of lock rings • Jaws are knurled on the end to prevent slippage • Spreads lock rings found on transmissions, master cylinders, brakes, and other applications 99 2990430 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) HEAVY DUTY SNAP RING PLIERS

• Reversible action for internal and external snap rings • Includes 10 pairs of interchangeable tips sizes: 0.06" to 0.125" in 15° and 75° 2920133 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999

SNAP RING PLIERS

I) 4 PC MINI SNAP RING PLIER SET INDIVIDUAL SNAP RING PLIERS

Chrome vanadium steel with knurled tips. Wt. 0.3 lbs. D E F G

STYLE Straight nose internal Straight nose external Bent nose external Bent nose internal

ITEM 8007373 8007382 8007391 8007408

PRICE 4.99 4.99 4.99 4.99

4 PC SNAP RING PLIERS SET Contains items D) though G) 8007364 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

H) SNAP RING PLIERS SET

• 4 interchangeable internal or external tips • Tips: straight, 90°, and 45° • Range: 3/8" to 2" 8007417 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

236

799

• Contains straight internal, straight external, bent external, and bent internal pliers • Ideal for narrow spaces 99 8031532 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

J) 14" SNAP RING/LOCK RING PLIER

• Has both serrated angled flat tips and 90° tips with retaining screws • Designed for external lock rings used in truck and tractor transmissions • 2-5/8" max. spread 99 8006659 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

K) SNAP RING PLIERS KIT

• Change from external to internal snap ring pliers, by simply pushing and turning the handle • Includes 4 pairs of straight and 4 pairs of bent nose tips, and a hex key to install tips 99 2921385 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HEAVY DUTY LOCKING SNAP RING PLIERS KIT

AXLE RETAINING RING PLIER

• For external ring sizes up to 3-3/4", and internal ring sizes up to 4" • Features replaceable tips and spring ratchet locking mechanism to hold snap ring securely 99 8006613 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Knurled adjusting knob for easy grip and chrome vanadium steel tips. 99 8002704 – Wt. 0.3 lbs. . . . . .

SOCKET SETS

H A N D

A A) 1/4" DR 21 PC SOCKET SETS

Both sets contain: 7 deep 6-pt. sockets, 9 shallow 6-pt. sockets, ratchet, universal joint, 6" spinner handle, 2" and 4" extensions, and metal storage case. SAE SET

• Shallow sockets: 3/16", 7/32" 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2" • Deep sockets: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2" 99 2920510 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O O L S

METRIC SET

• Shallow sockets: 4, 5, 5.5, 6, 7, 8, 9, 10, and 11 mm • Deep sockets: 5.5, 6, 7, 8, 9, 10, and 11 mm 99 2920528 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) 3/8" DR 20 PC SOCKET SETS

Both sets contain: 8 deep 6-pt. sockets, 9 shallow 6-pt. sockets, ratchet, 3" and 1-3/4" extensions, and metal storage case. SAE SET

• Shallow sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", and 7/8" • Deep sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", and 13/16" 99 2920494 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

METRIC SET

• Shallow sockets: 9, 10, 11, 12, 13, 14, 15, 17, 19 mm • Deep sockets: 10, 11, 12, 13, 14, 15, 17, 19 mm 99 2920502 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) 1/2" DR 16 PC SOCKET SETS

Both sets contain: thirteen 6-pt. sockets, ratchet, 5" extension, 14-1/2" flex handle, and metal storage case. SAE SET – Sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16",1-1/8", and 1-1/4" 99 2920445 – Wt. 7.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC SET – Sizes: 10, 11, 12, 13, 14, 17, 19, 20, 21, 22, 23, 24, and 27 mm 99 2920452 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) 3/4" DR 20 PC SOCKET SETS

Both sets contain: Sixteen 12-pt. sockets, 2 extensions: 4" and 8", 19" sliding T-bar, 20" ratchet, and metal case. SAE SET – 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8", 1-3/4", 1-13/16", 1-7/8", and 2". 99 2917110 – Wt. 29.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC SET – 19, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 41, 42, 45, 48, and 50 mm. 99 2917037 – Wt. 34.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

89 89

E) 3/4" DR 8 PC SAE SET

12-pt. sockets sizes: 2-1/16", 2-1/8", 2-3/16", 2-1/4", 2-5/16", 2-3/8", 2-7/16", 2-1/2", and metal box. 2916914 – Wt. 22.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

F) 3/4" DR 26 PC PROFESSIONAL SAE/METRIC SET

• Chrome vanadium construction • Twelve 12-pt. sockets: 7/8", 15/16", 1", 1-1/8", 1-3/16", 1-5/16", 1-3/8", 1-7/16", 1-5/8", 1-3/4", 1-7/8", and 2" • Ten 12-pt. metric sockets sizes: 22, 24, 27, 30, 32, 36, 38, 41, 46, and 50 mm • Two extensions 4" and 8", 20" reversible ratchet handle, 18" sliding “T” bar and metal box 99 8003040 – Wt. 35.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

199

G) 1" DR 20 PC SAE SOCKET SET

• Sixteen 12-pt. sockets: 1-5/8", 1-11/16", 1-3/4", 1-13/16", 1-7/8", 2", 2-1/8", 2-3/16", 2-1/4", 2-3/8", 2-1/2", 2-5/8", 2-3/4", 2-15/16", 3", and 3-1/8" • 25" reversible ratchet, 20" sliding T-bar, 2 extensions 8" and 16", and metal box 99 2923308 – Wt. 78.7 lbs. . . . . . . . . . . . . . . . .

279

237

H A N D

T O O L S

TORQUE ANGLE GAUGE

DUAL SCALE TORQUE WRENCHES

• 1/2" drive input and output • Angle scale: 0° to 360° • Ideal when servicing engines using torque-to-yield fasteners • Takes guesswork out of tightening by indicating number of degrees fastener is turned, on easy to read scale • 360° angle scale is marked in 2° increment with interval markers @ 10 and 30 degrees • Indicator etched on clear plastic plate - protects angle scale from dirt and grease 99 2990209 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3/4" DRIVE TORQUE WRENCH

Drive Len.

Strength

in.-lbs. 1/4" 10" 20-200 23-230 cmkg 14- 10-80 ft.-lbs. 3/8" 3/4" 1.4-11 mkg ft.-lbs. 1/2" 18" 10-150 1.4-20.7 mkg 26- 50-300 ft.-lbs. 3/4" 1/2" 6.9-41.4 mkg

Wt. (lbs.)

ITEM

PRICE

1.6 2922045 39.99 2.1 2920935 39.99 3.6 2919389 39.99 7.3 2926939 99.99

• Reversible drive • Torque: 100-600 ft-lbs. • Click type, torques one way allowing removal of tight bolts • O’all length: 45" 99 8002384 – Wt. 18.1 lbs. . . . . . . . . . . . . . . . . . . . . .

299

RATCHETS

RATCHETS D

QUICK RELEASE RATCHETS

F D) RATCHETS

Drive 1/4" 3/8" 1/2" 3/4"

B C • Heat treated chrome vanadium steel • Push button quick release of socket • 48 teeth Drive Length Wt. (lbs.) ITEM A 1/4" 5-3/4" 0.3 8052019 A 3/8" 8" 0.8 8052000 A 1/2" 10-1/2" 1.5 2910113 B* 3/4" 19" 5.7 2920099 * 24 teeth

E) PALM GRIP RATCHETS

PRICE 17.99 19.99 24.99 64.99

C) STUBBY RATCHETS

48 teeth. Drive 1/4" 3/8" 1/2"

Wt. (lbs.) 0.2 0.5 1.0

ITEM 8008381 8008390 8008407

Length Teeth Wt. (lbs.) ITEM PRICE 5-1/2" 42 0.3 2929339 9.99 7-3/4" 45 0.7 2929321 11.99 9-1/2" 45 1.1 2929362 15.99 19-1/2" 43 4.5 2910297 29.99

PRICE 14.99 14.99 19.99

1/4" drive, 42 teeth. 2920007 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" drive, 38 teeth 2916955 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 699

F) FLEX HEAD STUBBY RATCHET

7-position handle with built-in spinner flexes 90° 1/4" DRIVE, 4-1/2" LENGTH, 42 TEETH 8056275 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" DRIVE, 5" LENGTH, 42 TEETH 2929487 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) BENT FLEX HEAD RATCHETS

999 1199

• Bent handle and flex head makes it easier to reach into confined areas • 45 teeth 3/8" DRIVE, 10" LENGTH

2920263 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 1/2" DRIVE. 10" LENGTH 2920264 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1199 1299

3/8" DRIVE KIT

238

5 pc set contains: 4" long stubby ratchet, 1-3/4" and 3" extension bar, universal joint, and spinner adapter. 99 2921245 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DUAL DRIVE RATCHETS

EXTENSION BAR SETS

5 PC EXTENSION BAR SET

• 1/4" dr – 3" and 6" lengths • 3/8" dr. – 3", 6", and 10" lengths 2921096 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . B

899

3 PC EXTENSION BAR SET

3/8" dr. – 18", 24", and 30" lengths. 2918142 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Chrome vanadium steel construction • 72 teeth; requires only 5° of swing • 3/8" and 1/2" dr.

1799

4 PC EXTENSION BAR SET

A) DUAL DRIVE STUBBY RATCHET

1/2" dr. – 15", 18", 24", and 30" lengths. 2918134 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499 19 B) DUAL DRIVE RATCHET 99 WOBBLE EXTENSION SETS 8045180 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 24 Ergonomic soft grip . 8045199 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

EXTENSION BARS Allows sockets to swivel up to 15°. 6 PC SET

Size 1/4" x 3" long 1/4" x 6" long 3/8" x 3" long 3/8" x 6" long 1/2" x 5" long 1/2" x 10" long 3/4" x 4" long 3/4" x 8" long 3/4" x 12" long 3/4" x 16" long

Wt. (lbs.) 0.6 0.1 0.1 0.2 0.4 0.5 1.0 1.7 2.3 3.0

ITEM 2923449 2922409 2917698 2917706 2917714 2917722 2910357 2910355 2910358 2910359

A N D

PRICE 2.99 3.49 2.99 3.99 4.99 6.99 9.99 12.99 16.99 18.99

• 1/4" drive (2" and 4"), 3/8" drive (3" and 6"), and 1/2" drive (5" and 10") 99 2942860 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9 PC SET

T O O L S

1/4" dr. (2", 4", and 9"); 3/8" dr. (3", 6", and 9"); 1/2" dr. ( 2", 5", and 10"). 99 2910242 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FLEXIBLE EXTENSION SET

• Great for hard to reach places • 2 sizes: 1/4" dr. x 6" and 3/8" dr. x 8" 2920483 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

BREAKER BARS Description C D D E E F G G G G H H

Breaker Bar Breaker Bar Breaker Bar Breaker Bar Breaker Bar U-Joint Breaker Bar Sliding T-Bar Sliding T-Bar Sliding T-Bar Sliding T-Bar Speeder Handle Speeder Handle

Wt. Drive Length (lbs.)

ITEM

PRICE

1/2" 10" 0.9 2900059 3/8" 18" 2.0 2920173 3/4" 24" 4.8 2920172 1/2" 18" 2.1 2900050 1/2" 25" 2.9 2900049 1/2" 17" 2.2 2920334 1/4" 4" 0.1 2920344 3/8" 6-1/2" 0.3 2920347 1/2" 9-3/4" 0.8 2920349 3/4" 17-3/4" 2.7 2920350 3/8" 14-1/2" 1.0 2920387 1/2" 15" 1.0 2920395

9.99 17.99 39.99 14.99 19.99 14.99 4.99 5.99 9.99 19.99 8.99 9.99

E F

7PC HOLLOW NUT DRIVER SETS • SOFT TOUCH™ rubber handle for secure grip and comfort • Colour coded handles SAE: 3/16", 1/4", 5/16",11/32", 3/8", 7/16", and 1/2" 99 2920409 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 5, 5.5, 6, 7, 8, 9, and 10 mm 99 2920410 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19 19

239

A N D

SOCKET SETS FLANK GRIP

A Chrome Vanadium 6-Point Sockets. Socket Style Wt. (lbs.) ITEM PRICE 1/4" Shallow 0.1 2925576 2.29 5/16" Shallow 0.1 2925584 2.29 1/4" Deep 0.1 2921344 2.49 5/16" Deep 0.1 2921302 2.49 3/8" Shallow 0.1 2925600 2.49 7/16" Shallow 0.1 2925618 2.49 1/2" Shallow 0.1 2925626 2.49 9/16" Shallow 0.1 2925634 2.49 5/8" Shallow 0.1 2920246 2.49 3/4" Shallow 0.2 2920249 2.49 3/8" Deep 0.1 2925642 2.79 7/16" Deep 0.1 2925659 2.79 1/2" Deep 0.1 2925667 2.79 9/16" Deep 0.2 2925675 2.99 3/4" Deep 0.3 2925709 3.49 10 mm Shallow 0.1 2925741 2.29 11 mm Shallow 0.1 2920029 2.29 12 mm Shallow 0.1 2920030 2.29 13 mm Shallow 0.1 2920032 2.29 14 mm Shallow 0.1 2920033 2.49 15 mm Shallow 0.1 2925782 2.49 16 mm Shallow 0.1 2920034 2.49 17 mm Shallow 0.1 2920035 2.49 18 mm Shallow 0.2 2925816 2.49 19 mm Shallow 0.2 2920036 2.49 3/8" DRIVE

O O L S

SOCKETS

1/4" DRIVE

DRIVE ADAPTERS

• Chrome vanadium 6-point sockets • Socket holder included A) SHALLOW SOCKETS

Drive No. of Sizes Size Sockets 3/8" 9 3/8" - 7/8" 3/8" 9 9 to 19 mm 1/2" 10 7/16" - 1" 1/2" 10 11 to 24 mm

Wt. (lbs.) 1.2 0.9 2.1 1.8

ITEM

PRICE

2920098 2920106 2920170 2920171

9.99 9.99 17.99 17.99

0.8 0.7 1.9 1.7 2.8 3.0

2920023 2920031 2910230 2919496 2919793 2919579

12.99 12.99 13.99 13.99 19.99 19.99

B) DEEP SOCKETS

1/4" 1/4" 3/8" 3/8" 1/2" 1/2"

9 9 8 8 8 8

3/16" - 1/2" 5 to 12 mm 3/8" - 13/16" 10 to 19 mm 1/2" - 15/16" 13 to 24 mm

SOCKET LABELS

• Permanent easy read labels for sockets • Chemical and scratch resistant • Sizes: 5 to 19 mm metric, 1/4" to 1" SAE • Makes reading sizes easy and convenient 2920241 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

3 PC SOCKET CAPS

Chrome vanadium steel. Size 1/4"F - 3/8"M 3/8"F -1/4"M 3/8"F - 1/2"M 1/2"F - 3/8"M 1/2"F - 3/4"M 3/4"F - 1/2"M 3/4"F - 1"M 1"F - 3/4"M

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.4 0.3 0.8 0.9

ITEM PRICE 2917623 1.49 2923423 1.49 2911576 2.99 2922417 2.99 8000569 5.99 2917680 5.99 2911592 11.99 2917599 12.99

3 PC DRIVE ADAPTER SET

Sizes: 1/4" F x 3/8" M, 3/8" F x 1/2" M, 1/2" F x 3/4" M. 8000567 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

3 PC REDUCER SET

240

Sizes: 3/8" F x 1/4" M, 1/2" F x 3/8" M, and 3/4" F x 1/2" M. 8000573 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Used to turn sockets with a wrench in limited access areas. • 1/4" dr. x 3/8" hex, 3/8" dr. x 5/8" hex, and 1/2" dr. x 3/4" hex 8006999 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

UNIVERSAL JOINTS Swings 90° in either direction. 2919124 – 1/4" dr. – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . 2911337 – 3/8" dr. – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . 2917607 – 1/2" dr. – Wt. 0.4 lbs. . . . . . . . . . . . . . . . .

299 399 499

3 PC UNIVERSAL JOINT SET

Sizes: 1/4", 3/8", and 1/2" dr. 2921104 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

899

NUT DRIVER SET

HOSE CLAMP SCREWDRIVER

• 5 pc. metric nut driver set: 3, 3.5, 4, 4.5, and 5 mm • Includes case • Great hobby or toolbox item 8004571 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

• Fits 5/16" hex head • Flexible shank to reach difficult spots • O’all length: 10-1/2" 2970198 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Socket 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 10 mm 12 mm 13 mm 14 mm 15 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm 26 mm 28 mm 30 mm 32 mm

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.2 0.1 0.2 0.3 0.2 0.3 0.3 0.3 0.4 0.4 0.5 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.4 0.5

ITEM 8041834 8041843 8040871 8040899 8040906 8040915 8040933 8040942 8040951 8040960 8040979 8041914 8040988 8041923 8040997 8041665 8041683 8041692 8041709 8041004 8041022 8041031 8041040 8041718 8041727 8041736 8041745 8041754 8041763 8041772 8041790 8041807 8041816

PRICE 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99

3/4" DRIVE SHALLOW SOCKETS

1/2" DRIVE SHALLOW SOCKETS

• 12 pt. chrome vanadium steel • Lifetime warranty, backed by our Royal Service Promise • Professional quality with manufacturing processes that meet or exceed DIN, ISO 9001 and QS 9000 standards

1/2" DRIVE DEEP SOCKETS

SOCKETS

Socket 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 3/16" 7/8" 15/16" 10 mm 12 mm 13 mm 15 mm 17 mm 18 mm 19 mm 21 mm 24 mm 27 mm

Wt. (lbs.) 0.2 0.2 0.3 0.3 0.3 0.4 0.4 0.5 0.6 0.6 0.2 0.3 0.3 0.3 0.4 0.4 0.4 0.5 0.6 0.7

Socket 3/4" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-5/8" 1-11/16" 1-3/4 1-13/16" 1-7/8" 2" 29 mm 30 mm 32 mm 33 mm 34 mm 36 mm 38 mm 41 mm 46 mm 50 mm

Wt. (lbs.) 0.6 0.6 0.6 0.4 0.6 0.6 0.7 0.7 0.8 0.8 1.1 1.2 1.3 1.2 1.4 1.4 1.4 1.4 0.6 0.7 0.7 0.8 0.9 1.0 1.0 1.1 1.4 1.4

ITEM 8042058 8042067 8042076 8041059 8042085 8042094 8041068 8042101 8042110 8042129 8041932 8041941 8041950 8041978 8041996 8042003 8042012 8042021 8042030 8042049 ITEM 8042281 8041077 8041086 8041095 8041102 8041111 8042487 8041120 8041139 8041148 8041157 8041166 8041175 8042290 8041184 8041193 8041200 8041219 8042183 8042192 8042209 8042218 8042227 8042236 8042245 8042254 8042263 8042272

699

PRICE 6.99 6.99 6.99 6.99 7.99 7.99 7.99 9.99 9.99 9.99 7.99 7.99 7.99 7.99 7.99 7.99 7.99 9.99 9.99 9.99 PRICE 8.99 8.99 8.99 8.99 8.99 8.99 8.99 8.99 9.99 9.99 9.99 10.99 11.99 12.99 13.99 13.99 13.99 14.99 8.99 8.99 8.99 9.99 9.99 9.99 10.99 11.99 12.99 14.99

H A N D

T O O L S

241

COMBO WRENCH SETS

H A N D

A C

JUMBO COMBO WRENCH SETS A) 6 PC SAE

T O O L S

Sizes: 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", and 2". 2917755 – Wt. 20.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

7499

LONG COMBO WRENCH SETS

C) 14 PIECE SET – With pouch METRIC SET – Sizes: 6, 7, 8, 9, 10, 11, 12, 13, 14,

15, 16, 17, 18, and 19 mm. 2925055 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . SAE SET – Sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8," 15/16", 1" and 1-1/4". 2919603 – Wt. 6.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

B) 14 PC SAE SET – Sizes: 3/8", 7/16", 1/2", 9/16", 5/8",

11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/6", 1-1/8", and 1-1/4". 99 2920121 – Wt. 10.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . METRIC SET – Sizes: 8, 9, 10, 11, 12, 13, 14, 17, 19, 21, 24, 27, 30, and 32 mm. 99 2920372 – Wt. 9.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

44 44

STANDARD SETS C) 5 PIECE SET SAE SET – Sizes: 3/8", 7/16", 1/2", 9/16",

3499

C) 22 PIECE SAE & METRIC SET – With holder SAE SIZES: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16",

5/8", 11/16", 3/4", 13/16", and 7/8". METRIC SIZES: 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, and 19 mm. 2922854 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

and 5/8". 2918746 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC SET – Sizes: 8, 9, 10, 11, and 12 mm. 2910107 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 599

C) 11 PIECE SET METRIC SET – Sizes: 6, 7, 8, 9, 10, 11, 12, 13, 14,

17, and 19 mm. 2920015 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . SAE SET – Sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", and 7/8". 2920668 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

STUBBY WRENCH SETS Allow access to nuts and bolts in limited spaces where a regular wrench will not work. D) 8 PC SAE SET

• Sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 15/16", and 1" • O’all length: 4" to 5-3/4" 2920100 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

1499

D) 10 PC METRIC SET

1999

• Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm • O’all length: 3-3/4" to 5-1/2" 99 2920101 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SAE COMBINATION ANGLE WRENCH SETS

E) 14 PC SET

• Sizes: 1/2", 7/16", 3/8", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", and 1-1/4" • 60° and 15° 99 2920120 – Wt. 6.9 lbs. . . . . . . . . . . . . .

F) 6 PC SET

• Sizes: 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", and 2" • 45° and 15° 2920324 – Wt. 22.3 lbs. . . . . . . . . . . . .

8999

10 PC MINI SETS

7PC GEAR WRENCH SET

Ideal for confined areas.

• Chrome vanadium steel with heat treatment • 12 pt. box end with ratcheting function

SAE SET • Sizes: 5/32", 3/16", 13/64", 7/32", 15/64", 1/4",

9/32", 5/16", 11/32", 3/8" and 7/16" • O’all length: 2-3/4" to 3" 2920092 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

242

1499

SAE

5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4". 8003657 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

METRIC SET • Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, and 11 mm

METRIC

• O’all length: 2-3/4" to 3-15/16" 2920369 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

8, 10, 12, 13, 14, 15, and 18 mm. 8003659 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

5999 5999

INDIVIDUAL COMBINATION WRENCHES

6 PC PROFESSIONAL FLARENUT WRENCH SET

SAE SIZES

Size 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8 " 11/16"

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.3

ITEM

PRICE

Size

2920393 2927507 2927515 2927523 2929156 2927549 2920373 2927564

1.99 1.99 2.19 2.29 2.49 2.79 2.99 3.49

3/4" 7/8" 15/16" 1" 1-1/8" 1-1/4" 1-5/16" 1-1/2"

ITEM

PRICE

Size

2928380 2928398 2928406 2928414 2928422

1.99 2.19 2.29 2.49 2.79

15 mm 16 mm 17 mm 18 mm –

Wt. (lbs.) 0.4 0.6 0.7 0.9 1.2 1.4 1.5 2.1

2927572 3.99 2927598 4.99 2927606 5.99 2920294 7.99 2929164 9.99 2927648 12.99 2929289 14.99 2927689 19.99

Wt. (lbs.) 0.2 0.2 0.3 0.3 –

ITEM

PRICE

2928430 2928448 2928455 2928463 –

2.99 3.29 3.39 3.49 –

ITEM

PRICE

• Made with chrome vanadium steel • Sizes: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 10 x 12 mm, 13 x 14 mm, and 15 x 17 mm 99 2920610 – Wt. 1.6 lbs. . . . . . . . . . . .

7 PC STUBBY RATCHET SET

METRIC SIZES

Size 10 mm 11 mm 12 mm 13 mm 14 mm

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.2

• Chrome vanadium steel construction • 72 teeth SAE: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4". 99 8005202 – Wt. 1.8 lbs. . . . . . . . . . . . METRIC: 10, 12, 13, 14, 15, 17, and 19 mm. 99 8005203 – Wt. 1.9 lbs. . . . . . . . . . . .

H A N D

T O O L S

49 49

4 PC COMBO GEAR WRENCH SETS • Chrome vanadium steel construction • 72 teeth SAE: 7/8, 13/16, 15/16, and 1" 8005198 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 21, 22, 24, and 25 mm. 8005199 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

6999 6999

SPECIALTY WRENCH SETS A) 5 PC DOUBLE OPEN WRENCH SET SAE SET: 5/16" x 11/32", 3/8" x 7/16",

1/2" x 9/16", 19/32" x 11/16", and 5/8" x 3/4". 99 2925535 – Wt. 0.7 lbs. . . . . . . . . . . . . . METRIC SET: 8 x 9 mm, 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, and 16 x 17 mm. 99 2920049 – Wt. 0.6 lbs. . . . . . . . . . . . . .

B) FLARE NUT and LINE WRENCH SETS 3 PC SAE SET: 3/8" x 7/16",

1/2" x 9/16", and 5/8" x 11/16". 99 2919777 – Wt. 0.7 lbs. . . . . . . . . . . . . . . 3 PC METRIC SET: 10 x 12 mm, 13 x 14 mm, and 15 x 17 mm. 99 2923258 – Wt. 0.7 lbs. . . . . . . . . . . . . . . 6 PC SAE SET: 1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 13/16", and 7/8" x 1". 99 8006123 – Wt. 1.9 lbs. . . . . . . . . . . . 6 PC METRIC SET: Sizes: 6 x 8 mm, 10 x 12 mm, 13 x 14 mm, 15 x 17 mm, 19 x 22 mm, and 22 x 24 mm. 99 8006132 – Wt. 1.8 lbs. . . . . . . . . . . .

8 8

15 15

C) 8 PC FLARENUT WRENCH SET with HOLDER

3/8" drive. SAE SET: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8". 2922839 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC SET – Sizes: 10, 11, 13, 14, 15, 17, 19, 22 mm. 2923985 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1699 1699

D) 10 PC CROWFOOT WRENCH SETS

3/8" drive. SAE SET: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and 1". 2921328 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC SET: 10, 11, 13, 14, 15, 17, 19, 21, 22, 24 mm. 2923530 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1699 1699

243

H A N D

T O O L S

OFFSET COMBINATION WRENCHES Size (mm) Wt. (lbs.) 7 0.1 8 0.1 10 0.1 12 0.1 13 0.2 14 0.2 15 0.2 16 0.3 17 0.3 18 0.4 19 0.4 20 0.5 21 0.6 22 0.6 23 0.7 24 0.8 25 0.9 26 1.0 27 1.1 28 1.2 30 1.4 32 1.7 36 2.2

ITEM 2920740 2920741 2920744 2920746 2920747 2920748 2920749 2920750 2920751 2920752 2920753 2920754 2920755 2920756 2920757 2920758 2920760 2920761 2920762 2920763 2920764 2920765 2920766

PRICE 3.99 3.99 4.99 4.99 4.99 4.99 5.99 5.99 6.99 6.99 7.99 7.99 8.99 8.99 9.99 9.99 12.99 12.99 14.99 15.99 17.99 19.99 29.99

METRIC SET

Includes: 6, 7, 8, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, and 32 mm. 99 2920800 – Wt. 7.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Size (SAE) 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-5/8" 1-3/4" 1-13/16" 1-7/8" 2"

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.2 0.2 0.3 0.4 0.4 0.6 0.7 0.9 1.0 1.1 1.2 1.3 1.7 1.9 2.3 2.2 2.2 3.0 3.3 4.1 4.1 5.1

ITEM 2920771 2920772 2920773 2920774 2920775 2920776 2920777 2920778 2920779 2920781 2920782 2920784 2920785 2920786 2920787 2920788 2920789 2920790 2920792 2920793 2920794 2920795 2920796 2920797 2920798 2920799

PRICE 3.99 3.99 3.99 4.99 4.99 4.99 5.99 6.99 6.99 7.99 9.99 11.99 12.99 14.99 15.99 19.99 19.99 19.99 29.99 29.99 29.99 34.99 39.99 39.99 39.99 39.99

SAE SET

Includes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1", 1-1/16" x 1-1/8", and 1-1/4". 99 2920801 – Wt. 5.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

OFFSET BOX END WRENCHES

Size 10 x 11 mm 12 x 13 mm 14 x 15 mm 17 x 19 mm 1/4" x 5/16" 3/8" x 7/16" 1/2" x 9/16" 5/8" x 3/4" 3/4" x 7/8" 15/16" x 1"

Wt. (lbs.) 0.2 0.3 0.3 0.6 0.1 0.2 0.3 0.5 0.8 1.1

ITEM 2920804 2920805 2920806 2920808 2920826 2920827 2920828 2920830 2920832 2920835

PRICE 4.99 5.99 6.99 8.99 4.99 5.99 5.99 7.99 9.99 14.99

Who is Gedore? One of the world’s largest premier tool manufacturers. Established in Germany in 1919, they manufacture thousands of tools designed for industrial users worldwide. Products manufactured at Gedore’s Brazilian plant are distributed in Canada exclusively by Princess Auto. Features: • Lifetime warranty, backed by our Royal Service Promise • Excellent quality, with manufacturing processes that meet or exceed DIN, ISO 9001 and QS9000 standards • Matte, easy-to-grip, non-slip surface • Nickel-chromium plated for excellent rust resistance • Long length shafts to provide extra torque • Open-end wrenches are reinforced, then precision-ground after hardening to create an exceptionally strong, spreadresistant and dimensionally accurate product

SPANNER WRENCH SET

244

• Includes wrenches for pin and slot style nuts • Adjustable style allows for use on nuts from 3/4" to 4" 99 8039106 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BOX END RATCHET WRENCH SETS A) 5 PC REVERSIBLE RATCHETING WRENCH SET

Includes roll-up plastic pouch. SAE SET

Sizes: 1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 3/4", and 11/16" x 7/8". 99 2917458 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . .

A N D

METRIC SET

Sizes: 6 x 8 mm, 9 x 10 mm, 12 x 14 mm, 15 x 17 mm, and 19 x 21 mm. 2918803 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . .

1999

B) 5 PC OFFSET REVERSIBLE BOX END WRENCH SET SAE SET

C) 5 PC OFFSET BOXED END RATCHET WRENCH SET SAE SET

Sizes: 1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", and 3/4" x 7/8". 99 2920544 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . .

Sizes: 3/8"x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 13/16", and 7/8" x 15/16". 99 2920476 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

METRIC SET

Sizes: 6 x 8 mm, 10 x 12 mm, 11 x 13 mm, 14 x 17 mm, and 19 x 21 mm. 2923290 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . .

Sizes: 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 17 mm, and 18 x 19 mm. 2920477 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2299

5499

BOX END WRENCH SETS D) 5 PC 45° OFFSET BOX END WRENCHES

O O L S

SAE SET: Sizes: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 25/32", 13/16" x 7/8". 99 2923332 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . METRIC SET: Sizes 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 17 mm, 18 x 19 mm. 99 2921138 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . .

E) 5 PC MOON WRENCH SET

F) 5 PC “S” WRENCH SET

SAE SET: Sizes 5/16" x 3/8", 7/16" x 1/2", 9/16" x 5/8", 11/16" x 3/4", 13/16" x 7/8". 99 2920328 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . METRIC SET: Sizes 9 x 10 mm, 11 x 13 mm, 14 x 15 mm, 17 x 19 mm, 21 x 22 mm. 99 2920327 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . .

SAE SET: Sizes 13/32" x 3/8", 7/16" x 1/2", 9/16" x 19/32", 5/8" x 11/16", 11/16" x 3/4". 2928638 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC SET: Sizes 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 17 mm, 18 x 19 mm. 2923274 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19 19

SAE and metric measurement scales for sizing nuts, pipe and tube diameter. Length Jaw Cap. Wt. (lbs.) ITEM PRICE 4" 1/2" (13 mm) 0.1 8052812 3.49 6" 3/4" (19 mm) 0.3 8052778 3.99 8" 15/16" (24 mm) 0.6 8052787 4.99 10" 1-1/8" (28 mm) 0.9 8052796 6.99 12" 1-3/8" (35 mm) 1.4 8052803 9.99 15" 1-3/4" (44 mm) 2.7 8052821 17.99 18" 2-1/8" (54 mm) 5.0 8052830 29.99 24" 2-3/8" (60 mm) 7.0 8052849 39.99

TUBING & PIPE TOOLS

1499 1499

ADJUSTABLE WRENCHES

1/8" TO 1-5/8" TUBE REAMER

DEBURRING TOOL Deburring and marking tool with replacement blade. 2970911 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

Removes inner and outer burrs. 8020036 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

999

245

TAPERED REAMERS

A N D

• Ream, deburr, align, and enlarge holes • T-handle makes turning easy • Always turn clock-wise • Use of cutting oil is recommended

T O O L S

METRIC BUBBLE (ISO) FLARING TOOL KIT

GENERAL PURPOSE CARBON STEEL REAMERS 1/8" to 1/2" (3 - 13 mm) CAPACITY 99

5 999 1499

8016924 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5/32" to 7/8" (4 - 22 mm) CAPACITY 8016915 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5/32" to 1-7/32" (4 - 31 mm) CAPACITY 8006158 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . HEAVY-DUTY CHROME-MOLY REAMERS 1/8" to 1/2" (3 - 13 mm) CAPACITY 2910255 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199 5/32" to 7/8" (4 - 22 mm) CAPACITY 99 2910254 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 17 5/32" to 1-7/32" (4 - 31 mm) CAPACITY 99 8006962 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 24

• Designed for soft steel brake lines where an "ISO" or bubble style flare is required • Includes yoke assembly, flaring bar, gauge/wrench, and 4 adapters: 4.75 mm, 6 mm, 8 mm, and 10 mm • 4.75 mm adapter also suitable for standard 3/16" brake line 99 8056417 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TUBING and PIPE CUTTERS

TUBING and PIPE TOOL KITS

H A

G D

G) DOUBLE FLARING TOOL KIT

• Mini tube cutter capacity: 1/8" to 5/8" • 3/16", 1/4", 5/16", 7/16", 1/2", and 5/8" dies • Flaring tool, deburring tool, and moulded plastic case 99 2990245 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) 6 PC TUBING TOOL KIT

A) MINI-TUBING CUTTER

• Capacity: 1/8" to 5/8" • Ideal for working in close quarters 8027155 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

B) 9" HOSE CUTTER

• Reinforced nylon handle • Cap.:1/2" x 1-1/4" dia. 8020054 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

C) 2 PC TUBING and PIPE CUTTER

• Large cutter capacity: 1/8" to 1-1/8" with deburring point • Mini cutter capacity: 1/8" to 5/8" 99 8027182 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) 9-1/2" HEAVY DUTY HOSE CUTTER

• Large 2" cutting capacity • Heat treated carbon steel blade 8004406 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

• Cuts 1/8" to 1-1/8" tubing • Built-in deburring tool • Benders for 3/16", 1/4", and 3/8" tubing • Flaring tool fits 3/16" to 5/8" tubing, makes a 45° flare 99 2920890 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

39 199

REPLACEMENT DIES FOR #2990245 Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8056284 – 3/16" 8056293 – 1/4" 8056319 – 5/16" 8056337 – 3/8"

8056364 – 7/16" 8056373 – 1/2" 8056391 – 5/8"

ECCENTRIC CONE TYPE FLARING TOOL

E) 1-1/4" PVC PIPE CUTTER

• Aluminum housing • Cap.: 1-1/4" dia. (max.) 8020063 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

F) RATCHETING TUBE CUTTERS

246

Cap.: 1/4" to 7/8". 8020081 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . Cap.: 5/16" to 1-1/8". 8045215 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499 3499

• Creates consistent, high strength 45° flares from 3/16" to 5/8" • Offset flaring cone creates perfect flares through unique spiralling action, which automatically burnishes the inside flare face, leaving no surface imperfections • Large handle reduces effort required 99 8034806 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TUBING BENDERS

A) 3 PC TUBING BENDER SET

A N D

• Eliminate crimping and collapsing of copper and other thin wall tubing • Sizes: 1/4", 3/8", and 1/2" 8019958 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . .

899

B) TUBE BENDING PLIERS

• For copper and steel tubing • Fits 3/16", 1/4", 5/16", and 3/8" 2920119 – Wt. 1.4 lbs. . . . . . . . . . . . . . .

C) TUBING BENDER

1499

• Bender has calibrated markings for 0° to 180° • Sizes: 1/4", 5/16", and 3/8" 2910677 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4" CHAIN PIPE WRENCH

• 12" long chain • For use on pipe tubing up to 4" dia. 8002186 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

8" CHAIN PIPE WRENCH

14" HEX WRENCH

• Heavy duty • Drop forged jaw • For tubing up to 8" dia. • Chain length 39" • 48" powder coated handle 8002188 – Wt. 26.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

T 8999

PIPE WRENCHES

O O L S

• Cast iron handle with chrome vanadium steel jaw • 5/8" to 1-1/4" cap. 99 8050887 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CAST IRON

24" BENCH STYLE BOLT CUTTER

• Full body special heat treatment • Drop-forged chrome vanadium steel head • Base measures: 5" x 21" 8002185 – Wt. 15.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Length Max. Opening Wt. (lbs.) 10" 1-3/4" 1.5 12" 2" 2.1 14" 2-3/4" 3.1 18" 3" 4.8 24" 3-1/4" 7.2 36" 4-1/2" 14.2 48" 5" 23.6

5999

PIPE THREADERS

E D) RATCHETING PIPE THREADER

6999

E) HEAVY DUTY RATCHETING PIPE THREADER

• Ratchet handle with 5 dies • Thread sizes: 3/8", 1/2", 3/4", 1", and 1-1/4" NPT 2910162 – Wt. 17.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

PRICE 6.99 8.99 9.99 14.99 19.99 44.99 59.99

ITEM 8053768 8050896 8053786 8053795

PRICE 18.99 24.99 44.99 69.99

ALUMINUM

Length Max. Opening Wt. (lbs.) 14" 3" 2.4 18" 3-1/2" 3.2 24" 4" 6.1 36" 4-1/2" 8.2

PRINCESS AUTO RESPECTS YOUR PRIVACY

Includes dies for 1/4", 3/8", 1/2", 3/4", and 1". 2910019 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

ITEM 2926426 2922011 2924579 2924603 2921914 2921922 2920456

9999

We believe that all Princess Auto customers should be treated fairly, honestly, ethically and with dignity and respect. We value our relationship with our customers, and as such, Princess Auto is committed to maintaining the accuracy, confidentiality, security and privacy of your information. Princess Auto has developed a set of policies and procedures to follow to ensure your personal information is kept secure and private. To view this policy, please visit our website at www.princessauto.com/privacy or contact our National Call Centre for more information at 1-800-665-8685.

247

BOLT CUTTERS

A N D

A) 8" MINI BOLT CUTTER

• Heat treated drop forged jaws • General purpose for cutting bolts, screws, wire, etc. • For non-ferrous metals like copper, brass, aluminum, silver, plastic, and mild steel 99 8044029 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) 12" BOLT CUTTER

• Lightweight aluminum handles • Chrome vanadium blades 8050878 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

2299

C) HEAVY DUTY BOLT CUTTERS

RIVETERS

Chrome vanadium cutting blades. Size Wt. (lbs.) ITEM 18" 3.5 8043878 24" 6.0 8043887 36" 12.6 8043896

PRICE 19.99 29.99 39.99

E) SWIVEL HEAD RIVETER

• Head rotates 360° • Spring-loaded handle for easy rivet loading and ejection • Extended nose for hard-to-get places • Includes: 4 nose pieces with wrench • Uses 4 rivet sizes: 3/32", 1/8", 5/32", and 3/16" 99 2920930 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

F) 18" RIVETER

• 4 nose pieces: 1/8", 5/32", 3/16", and 1/4" • Long handles helpful where extra reach is required • Ideal for use with larger size rivets 99 8048882 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

G) 21" LONG HANDLED RIVETER

F D) 10" HAND RIVETER

• 4 nose pieces: 3/32", 1/8", 5/32", and 3/16" • Rubber grip 2920929 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

• 5 nose pieces: 1/8", 5/32", 3/16", 7/32", 1/4" • Easily sets large rivets including 1/4" all steel and split rivets • Extra long handles for single stroke setting of rivets used on door handles, window regulators, and other body shop applications 99 2922078 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TWISTER™ PROFESSIONAL RIVET TOOL • Uses 4 rivet sizes: 3/32", 1/8", 5/32", and 3/16" • Head rotates 360° • Spring-loaded handle for easy rivet loading and ejection • Extended nose for hard-to-get places • Includes: 4 nose pieces with wrench 99 2920392 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

RIVETS

248

Qty 25 20 15 18 15 12

BOX RIVETS

ITEM 3860015 3860016 3860017 3860032 3860030 3860031

PRICE 1.49 1.49 1.49 1.99 1.99 1.99

ALUMINUM BACK-UP PLATES – 30 pcs. per card. Wt. 0.1 lbs. 3860018 – 1/8" DIA. 99 3860019 – 3/16" DIA. . . . . . . . . . . . . . . . . . . . . . . /ea.

Aluminum

Thickness 1/8" 1/4" 1/2" 1/8" 1/4" 1/2"

Steel

Dia. 1/8" 1/8" 1/8" 3/16" 3/16" 3/16"

Aluminum

CARDED RIVETS – Wt. 0.1 lbs.

Dia. Thickness Qty 1/8" 1/8" 100 1/8" 1/4" 100 1/8" 1/2" 100 1/8" 1/8" 100 1/8" 1/4" 100 1/8" 1/2" 100 3/16" 1/8" 50 3/16" 1/4" 50 3/16" 1/2" 50

Wt. 0.1 0.1 0.1 0.3 0.3 0.4 0.2 0.2 0.2

ITEM PRICE 3860021 5.49 3860022 5.99 3860023 7.99 3860029 5.49 3860024 5.99 3860025 7.99 3860026 5.99 3860027 5.49 3860028 6.49

TIN SNIPS

MULTI-MASTER TINNER SNIPS

• 10-1/2" long • Combines long cut of tin snips with the strength of compound action, multiplying the hand force by 5 times • Great for making long, fast cuts in several types of material including: paper, plastic, sheet metal, aluminum, vinyl siding, screening, and much more • Cuts up to 20-gauge steel • Features serrated jaws as well as non-slip textured grips 99 2920613 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

10" TINNER SNIPS

A N D

10" AVIATION TIN SNIPS

Chrome vanadium blades. STRAIGHT CUT 2920949 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . LEFT CUT 2920948 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . RIGHT CUT 2920947 – Wt. 0.8 lbs.

6 699 99 .......................... 6 99

TIN SNIPS A) AVIATION TIN SNIPS

• Chrome moly blades • Cuts up to 18-gauge sheet metal

O O L S

Wt. 0.9 lbs.

2910130 – STRAIGHT CUT 2910131 – RIGHT CUT 2910132 – LEFT CUT . . . . . . . . . . . .

1499/ea.

B) 10" TINNER SNIPS

• All purpose straight cut pattern • Chrome vanadium steel blades • Vinyl coated handles 99 8043903 – Wt. 1.4 lbs. . . . .

• Cuts steel, aluminum, rubber, plastic, leather, carpets, etc. • Induction hardened tool steel HRC-58-60 • Cuts up to 22-gauge sheet metal 99 2920336 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . .

C) OFFSET AVIATION TIN SNIPS Wt. 0.9 lbs. 2910178 – Cuts right and straight 2910179 – Cuts left and straight .

1699/ea.

PUNCHES & CHISELS HOLLOW PUNCH SETS

METAL PUNCH D

D) 6 PC SET

• Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" • Comes with roll-up pouch 2926699 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

E) 9 PC SET

• Punches holes in leather, paper, plastic, wood, sheet metal, and any other soft material • Pierces up to 16-gauge metal • Interchangeable punches, sizes: 2 to 10 mm 99 • Uses 1 ton of pressure to punch 2921393 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . holes • Complete with 7 sizes of punches F) 12 PC SET and dies sizes: 3/32", 1/8", 5/32", Sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 3/16", 7/32", 1/4", and 9/32" 5/8", and 3/4". 99 99 8019921 – Wt. 3.2 lbs. . . . . . . . . . 2920169 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

249

H A N D

PUNCH and CHISEL SETS 5 PC 4" CENTRE PUNCH SET

Sizes: 1/16", 1/8", 5/32", 3/16", and 1/4". 2920301 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

3 PC COLD CHISEL SET

Sizes: 3/8" x 5-1/2", 1/2" x 6", and 5/8" x 6-1/2". 99 2920898 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

5 PC 8" PIN PUNCH SET

Sizes: 1/8", 3/16", 1/4", 5/16", and 3/8". 2970140 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

6 PC PUNCH SET

T O O L S

• Sizes: Five pin punches 3/32" x 4-1/2", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" x 5-3/4", and one 3/16" x 6" pin punch • Chrome vanadium steel 2920896 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" punches • All are approx. 3-1/2" long 99 8016906 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

12 PC JUMBO PUNCH and CHISEL SET (SHOWN)

999

9 PC PIN PUNCH SET

• Sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8" • 4" length 99 2920557 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

5 PC TAPER PUNCH SET

Sizes: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", and 1/4" x 6-3/4". 2920897 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

3 PC SOLID BRASS PUNCH SET

• Non-sparking solid brass construction prevents damage to object being struck • Sizes: 1/4" x 4" and 3/8" x 6"pin punches and 1/2" x 8" drift punch 2920202 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Drop forged, heat treated 7" to 11" • 4 cold chisels, 2 cape chisels, 2 taper punches, 3 centre punches, and 1 pin punch 99 2990065 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

28 PC TRANSFER PUNCH SET

• Heat-treated tempered tool steel with industrial black oxide finish • Diameters 0.0025" undersize for easy use • 4-7/8" long punches: 3/32" to 1/2" (sizes increment in 64ths) and handy 17/32" • Ideal for tool makers and machinists • High visibility stand included 99 2924785 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

16 PC PUNCH and CHISEL SET

• Sizes: 5 taper punches, 5 pin punches, 2 centre punches, 3 cold chisels, and 1 chisel-punch gauge • 4-1/2" to 6-3/4" long • Chrome vanadium steel 99 2990711 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1399

21 PC PUNCH AND CHISEL SET

1499

• Sizes: 5 cold chisels, 6 taper punches, 6 pin punches, and 4 centre punches • 4-1/2" to 7" long, chrome vanadium 2920899 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4 PC LONG TAPER PUNCH SET

Sizes: 3/16" x 8", 3/16" x 12", 1/4" x 12", and 1/4" x 14-3/4". 2920900 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

8 PC SOLID BRASS PIN PUNCH SET

5" AUTOMATIC CENTRE PUNCH

3999

11 PC GASKET and HOLLOW PUNCH SET

• One hand use • Create drill centre or locate points on layout boards • Under compression, tip recoils into work • Adjustable power 99 2910208 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

POCKET AUTOMATIC CENTRE PUNCH

• Punches, marks, scribes, and starts nail holes • Lightweight aluminum body with replaceable alloy steel point for long wear • Adjusts for light or heavy markings • Pencil slim design with pocket clip 99 2910303 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1 driving mandrel with punch sizes: 1/4", 5/16", 3/8", 7/16". 1/2", 9/16", 5/8", 3/4", 7/8", 1". 8002270 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3299

MINI CHISEL SET

AUTOMATIC CENTRE PUNCH

250

• Special hardened tip for instant marking • No hammer required, spring loaded barrel 8009237 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

• 4 pc. mini chisel set • Great hobby/crafter item • Measures from 3/32" to 3/8" sizing heads • Stainless steel 8040434 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

13 PC QUICK CHANGE PUNCH and CHISEL SET

• 1 heavy duty chrome moly handle with PVC grip • 12 chrome vanadium punch bits • 5 flat chisels: 1/2 x 10", 5/8" x 10", 3/4" x 10-3/4", 7/8" x 11-3/4", and 1"x 10-3/4" • 1 cape chisel: 1/4" x 10-3/4" • 2 tapered punches: 1/8" x 10-3/4" and 1/4" x 10-3/4" • 2 centre punches: 1/8" x 9-3/4" and 3/16" x 10-1/2" • 2 pin punches 3/16" x 10" and 1/4" x 10" 99 8021124 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A N D

PUNCHES AND CHISELS

T D

INDIVIDUAL PUNCH and CHISELS

Description A A A A A B B B C C C D D

3/8" Cold Chisel 1/2" Cold Chisel 3/4" Cold Chisel 3/4" X-Long Chisel 1" X-Long Chisel 1/8" Punch 5/32" Aligning Punch 1/4" Aligning Punch 1/8" Pin Punch 3/16" Pin Punch 1/4" Pin Punch 3/8" Centre Punch 1/2" Centre Punch

O’all Length 5-1/2" 6" 7" 12" 12" 5" 9" 12" 4-3/4" 5-1/4" 8" 5" 6"

Wt. (lbs.) 0.2 0.2 0.5 1.1 1.5 0.1 0.2 0.9 0.1 0.1 0.2 0.2 0.4

ITEM

PRICE

2910076 2942605 2942621 2910078 2910079 2910082 2910083 2910086 2910085 2942670 2942688 2910087 2910088

3.49 3.99 5.99 8.49 12.99 3.99 5.49 9.99 5.99 3.99 5.99 3.99 4.49

HAMMERS

CHISELS with HAND GUARD

• Ergonomically designed • Grip absorbs shock and protects hand from hammer E) Size: 1" x 8". 2929917 – Wt. 1.2 lbs. . . . . . . . . . . . . . F) Size: 1" x 12". 2910080 – Wt. 1.8 lbs. . . . . . . . . . . . . .

O O L S

1299 1599

G) MASON CHISEL with HAND GUARD

Size: 2-1/4" x 7-1/2". 2920399 – Wt. 1.0 lbs. . . . . . . . . . . . . .

1499

H) BRICK CHISEL with HAND GUARD

Size: 3" x 8". 2910367 – Wt. 1.5 lbs. . . . . . . . . . . . . . . Size: 4" x 7-1/2". 2920398 – Wt. 1.9 lbs. . . . . . . . . . . . . .

1199 1499

I) COLD CHISEL with HAND GUARD

Size: 3/4" x 12". 2910366 – Wt. 1.3 lbs. . . . . . . . . . . . . .

1299

BALL PEIN HAMMERS

CLUB HAMMERS

Fibreglass handles. 16 OZ.

1199 99 2920167 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 14 32 OZ. 99 2924595 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 14 2920166 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

24 OZ.

Fibreglass handles. 48 OZ.

1299 99 2910015 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 14 CROSS PEIN HAMMERS 2910014 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

64 OZ.

16 OZ BRASS HAMMER

Fibreglass handle. • Non-sparking • Soft brass head allows some give when hammering • Fibreglass handle 99 2920959 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

28 OZ.

999 99 2940079 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 11 2940081 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

35 OZ.

251

H A N D

CLAW HAMMERS Fibreglass handle. A) 16 oz. CLAW HAMMER 2945194 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

B) 24 oz. FRAMING HAMMER

Milled face. 2945186 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DEAD BLOW HAMMERS

1199

HOBBY HAMMER

T O O L S

Soft face head with rubber coated plastic handle. Head Size Wt. (lbs.) ITEM PRICE 16 oz. 1.2 2943280 9.99 24 oz. 1.8 2943298 11.99 32 oz. 2.1 2943322 13.99 48 oz. 3.0 2943314 15.99

• 7-7/16" long steel hammer with threaded 2-sided head • Includes 6 interchangeable heads; brass, nylon, ball pein, chisel, flat steel, and oval 99 8037929 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

RUBBER MALLETS

MINI HAMMER SET

C Contains a 1 oz. 8" and a 2 oz. 10" hammer. 2926517 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D E

C) FIBREGLASS HANDLE

Head 16 oz. 24 oz. 32 oz.

Wt. (lbs.) 1.4 2.2 2.6

ITEM 2940083 2940084 2920305

PRICE 6.99 7.99 8.99

ITEM 2920988 2920989 2920791 2940185 2920809

PRICE 3.49 3.99 4.49 4.99 5.49

799

DOUBLE FACED SOFT MALLETS F

D) WOODEN HANDLE

Head 8 oz. 12 oz. 16 oz. 24 oz. 32 oz.

Wt. (lbs.) 0.7 1.0 1.1 1.8 2.4

E) METAL HANDLE

• Metal handle, with rubber coating • 16 oz. head size 2944486 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

• Mallets have 2 removable, replaceable heads; black rubber head for a cushioned strike and high impact yellow plastic head for a positive strike • Metal handles come with rubber coating for better grip

12" NAIL PULLER F

Head

Handle Dia.

O’all Length Wt.

3/4"

Wood

8-3/8"

ITEM

PRICE

0.2 2925477

3.99

G 1-3/8"

Metal

11-3/8" 1.0 2925485

5.99

H 1-1/2"

Metal

11-1/2" 1.4 2925493

6.99

REPLACEMENT HEADS

Includes one black and one yellow head. Wt. 0.3 lbs.

252

Black plastic handle. 8001191 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

2920008 – 1-3/8" dia. 2920009 – 1-1/2" dia. ..................................

299/set

18" NAIL PULLER

SLEDGE HAMMERS

A Head 6 lbs. 6 lbs. B 8 lbs. B 12 lbs. C 10 lbs. A

• Slide hammer is ideal for removing sunken nails • Additional length provides excellent leverage 99 8005926 – Wt. 4.9 lbs. . . . . . . . . . . .

FIBREGLASS SLEDGE HANDLE

2 PART EPOXY KIT

For installation of above handle. 2970174 – Wt. 0.2 lbs. . . . . . . . . . . . .

599

• 34" sledge handle • Polypropylene covering over a solid fibreglass rod • Shock absorbing qualities • Hi-visibility yellow • Cushion grip • Easily installed with special 2 part epoxy kit 99 2920446 – Wt. 1.9 lbs. . . . . . . . . . . .

Length 32" 32" 32" 32" 35"

Handle Material Hickory Fibreglass Fibreglass Fibreglass Hickory

Wt. (lbs.) 7.0 8.7 10.6 14.5 11.6

C ITEM

PRICE

8014962 2920162 2920163 2920165 8014971

24.99 26.99 27.99 34.99 29.99

HICKORY HANDLES

Type of Handle 6-16 lb. 3-5 lb. 3-5 lb. 8-12 oz. 16-20 oz. 32-48 oz. 32-48 oz. 56 oz.

SPLITTING TOOLS

Wt. Hammer Used For Length (lbs.) Sledge/Maul 32" 1.3 Axe Handle 36" 1.6 Single Bit Axe 28" 1.0 Machinist/Ball Pein 12" 0.2 Machinist/Ball Pein 14" 0.4 Machinist/Ball Pein 18" 0.6 Blacksmith/Plow 14" 0.5 Blacksmith/Plow 16" 0.6 Sledge 30" 1.0 Claw hammer 13" 0.3 Claw hammer 14" 0.4 Boy scout axe 14" 0.4

ITEM

PRICE

2943066 2943074 2943645 2943108 2943116 2943132 2943140 2943157 2940124 2940126 2940127 2940129

7.99 9.99 9.99 3.29 3.49 3.49 3.49 3.49 6.99 2.99 3.49 3.99

A N D

T O O L S

HANDLE REPAIR WEDGES D

E G

G) WOOD and STEEL REPAIR WEDGES

Pkg. contains 1 wood and 2 steel wedges. Wt. 0.1 lbs.

2943488 – SINGLE BIT AXE WEDGE 2943504 – SLEDGE HAMMER WEDGE 2943512 – SHORT HAMMER WEDGE . . . . . . . . . . . . . . . . . . .

F D) 4 LB AXE

Fibreglass handle. 2910013 – Wt. 6.8 lbs. . . . . . . . . . . .

2599

• Pkg. of 4 different sized metal wedges • 21/32" to 1-1/8" long 3808771 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3199 2799

I) 6 PC ZINC ALLOY DIE-CAST WEDGE SET

E) 8 LB SPLITTING MAUL

Fibreglass handle. 2910011 – Wt. 11.0 lbs. . . . . . . . . . . F) 5 LB. CLAY PICK 2910319 – Wt. 7.8 lbs. . . . . . . . . . . .

149/ea.

H) HAMMER HANDLE WEDGES

199/pkg.

• Comes with rehandling instructions • 1 axe, 1 sledge, and 4 hammer wedges 2940065 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299/set

253

BROOMS & SQUEEGEES

A N D

BROOM HEADS, HANDLES and BRACE A) WOODEN COUNTER/BENCH BRUSH

• 14" long (9" brush face, 2-3/4" trim) • Filled with feather tip synthetic fibre 3810010 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

B) SYNTHETIC HORSEHAIR WINDOW/AUTO BRUSH

• 10" structural foam block densely filled with synthetic horse hair • Takes any standard handle or fountain handle 99 3810019 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) STIFF SWEEP BROOM HEAD

O O L S

• For parking lots, driveways, snow, mud, and grain (wet or dry) • Oil and solvent resistant • All heads use threaded handles and have pre-drilled holes to add a brace 18" wide. 99 3810090 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24" wide. 49 3810108 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8 11

C) COMBINATION BROOM HEAD

C HANDLES

• Soft tip around a stiff fibre centre • For both debris and fine dust • All heads use threaded handles and have pre-drilled holes to add a brace 18" wide. 99 3810116 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24" wide. 99 3810124 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9 12

HARDWOOD HANDLES

Handle Type

Size

D Threaded Hardwood 15/16" x 54" E Threaded Metal Tip 15/16" x 54" F Tapered Handle 1-1/8" x 54"

Wt. (lbs.) 0.8 1.2 1.0

ITEM PRICE 3810140 3.49 3810157 4.49 3810165 4.49

G) JUMBO BRACE for PUSH BROOMS 3810012 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PROFESSIONAL QUALITY BROOMS

299

FLOOR SQUEEGEES

HANDLES SOLD SEPARATELY

K L

H • 24" wide head • Heavy duty 1-1/8" x 60" hardwood handle and brace included H) MEDIUM SWEEP BROOM

2-3/4" long bristles. 3810065 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

I) SUPER ROUGH SURFACE BROOM

254

4" long bristles. 3810064 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

• Oil resistant red foam blade • Replacement blades available Type Width Wt. J Straight 24" 3.0 J Straight 36" 4.2 K Curved 24" 3.1 K Curved 36" 3.2 Replacement blade 24" 0.6 Replacement blade 36" 0.9 L 54" handle

ITEM 3811007 3811015 3811023 3811031 3811049 3811056 3810165

PRICE 22.99 29.99 28.99 35.99 12.99 16.99 4.49

WINDOW SQUEEGEES

A N D

B A) 12" WINDOW SQUEEGEE HEAD 3810067 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

B) 10" WINDOW SQUEEGEE

Sponge with scrub netting. 20" handle 3810047 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

O O L S

C) 10" TELESCOPING WINDOW SQUEEGEE

Handle extends from 4 to 7 ft. 3810052 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PRY BARS

J K L For prying, positioning, or aligning. Description Dimensions Wt. (lbs.) D Lining Pry Bar 24" long 2.5 D Lining Pry Bar 36" long 4.0 D Lining Pry Bar 48" long 11.4 D Lining Pry Bar 60" long 13.1 E Flat Pry Bar 12" long 0.9 E Flat Pry Bar 16" long 1.2 E Flat Pry Bar 24" long 1.8 F 4 PC Heel Pry Bar Set 6", 12", 16" and 20" long 3.8 G Pry Bar 16" long 1.4 H Mini Pry Bar 7-1/2" long x 1" wide 0.3 I Hex Shaped Pry Bar 24" long 3.5 I Hex Shaped Pry Bar 36" long 4.5 J Octagon Stock Stripping Bar Polished claw tips and prying tip 48" long x 1" 11.2 K Chisel Tip Crowbar 51" long 11.9 K Chisel Tip Crowbar 60" long 17.9 L Crowbar 5 ft. x 2-3/8" chisel end 14.5 M 4 PC Pry Bar Set 8", 12", 18" & 24" long 3.4 M Pry Bar 18" long 1.0

M ITEM 2943637 2944635 2940112 2940120 2910221 2910224 2910226 2919546 2942357 2970142 2940146 2940161

PRICE 9.99 12.99 19.99 34.99 3.99 5.99 7.99 14.99 5.99 2.99 5.99 9.99

2940121 2970195 2970196 2970203 2942852 2942845

24.99 24.99 34.99 26.99 14.99 4.99

255

3 PC DOMINATOR PRY BAR SET • Includes 7", 12", and 18" pry bars • Ergonomically designed handle for more secure and comfortable grip • Patented capped handle end allows user to strike handle with hammer 99 8000565 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A N D

T O O L S

SAWS HACKSAW BLADES

HACKSAWS B

• Ideal for wood, plastic, any machinable metal including conduit, stainless steel tubing, angle iron, copper tubing, structural materials, etc. • Flexible, shatterproof, longer life, and faster cutting • High speed bi-metal HIGH SPEED STEEL BLADES

A) 9-1/2" MINI HACKSAW

Uses 6" blade.

2910018 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT 6" MINI HACKSAW BLADES 3 per pkg. 2922375 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

129

99¢/pkg.

B) HANDI CUT HACKSAW

• Holds regular hacksaw blades • Length of holder: 7-3/4" 2910229 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Length 10" 12" 12" 12"

Teeth/Inch 32 18 24 32

Wt. (lbs.) 0.1 0.1 0.1 0.1

ITEM PRICE 2922789 1.49 2922797 1.49 2922805 1.49 2922813 1.49

COBALT BLADES

Length 12" 12"

Teeth/Inch 18 24

Wt. (lbs.) ITEM PRICE 0.1 8002861 1.99 0.1 8002872 1.99

249 EXCHANGEABLE BLADE C) 12" TUBULAR FRAME HACKSAW 99 HANDSAW 2920628 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 6 D) ADJUSTABLE HACKSAW

10" or 12" blade fits vertical or horizontal. 2910017 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

E) HIGH TENSION HACKSAW

• Uses standard 12" blade • Can cut at 45° or 90° • Extra blades can be stored in handle • Can be used as a versatile compass saw with blade inserted in front end of saw tube 99 2910701 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

COMBINATION BOW and HACKSAW

• Two 12" blades • Bow saw for wood • Hacksaw for both plastic and metal 8000780 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Use with any hacksaw or reciprocating saw blade • Durable zinc alloy handle • Includes: One 12" 24 tooth hacksaw blade, one 6 tooth and one 12 tooth SK5 steel 6" reciprocating saw blades 99 8001691 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

21" BOW SAW

599

REPLACEMENT BOW SAW BLADES – 3 Pack 8047259 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 1.99

• Tubular steel frame • Frame includes adjustable cushion grip 8003844 – 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

12" GRIT EDGE ROD SAW BLADE

256

• Tough alloy steel rod is coated with tungsten carbide grit particles • Cuts “unsawable” materials like fibreglass, cast iron, masonry, concrete, hardened tool steel, and ceramic tile 49 2940450 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FILES

H A N D

7 PC MACHINIST FILE SET • Includes: 10" flat bastard file, flat smooth file, halfround bastard file, mill bastard file, round bastard file, square bastard file, 7" slim taper file • General purpose file kit for machine shops 99 2910301 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FILE SETS

FILES C D

C) 5-1/4" TUNGSTEN POINT FILE A) 5 PC FILE SET

Includes: 2 round, 2 square and 1 flat steel file with wooden handles. 99 2910040 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) 4 PC 8" FILE SET

Includes: 1/2" round, rasp, mill, and round file. 2924918 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

B) 12 PC FILE SET

• Assortment of files and rasps with 2 wooden handles • O’all length: 7-3/4" to 11-3/4" 2910909 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Designed for dressing distributor points • Double-cut 2910300 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

D) 8" AXE SHARPENING FILE

• Ideal for sharpening axes and garden tools • Rectangular shape • One side is double-cut, the other single-cut 2910298 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

799

BASTARD FILES

1199

DIAMOND RIFFLER FILE SETS

G) ROUND BASTARD FILE

• Single cut • File circular openings or concave surfaces Length Wt. (lbs.) ITEM PRICE 8" 0.2 2920920 6.49 12" 0.6 2920927 11.99

E • Diamond grit coated tips • Vinyl coated handles

H) MILL BASTARD FILES

E) 10 PC SET

• 6" handles • 1-1/4" filing surface 8025362 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1399

F) 10 PC SET

• 2-3/4" filing surface • 7" x 3/16" 8025380 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

• Used for sharpening mill or circular saws, drawer filing, or finishing metals • Single cut on sides and edges Size Wt. (lbs.) ITEM PRICE 6" 0.1 2920906 4.99 8" 0.3 2920907 5.99 10" 0.5 2920909 7.99 12" 0.8 2920926 11.49

DIAMOND FILES

12" FLAT BASTARD FILE

• Used by machinists, machine builders, ship, and engine builders • Double-cut on on both sides, single cut on each edge 99 2920925 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Coated with micro diamond chips • Can be used on metal, wood, tile, plastics, masonry, and more FLAT

1499 99 8018824 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 14 8018815 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ROUND

257

NEEDLE FILE SETS

CHAIN SAW FILES C

A N D

B Size

A) 5 PC 7-1/4" NEEDLE FILE SET

T O O L S

D Wt. 0.1 lbs.

Includes: round, square, triangle, half round, and flat files with 3/16" dia. vinyl grips, & vinyl pouch. 99 2921831 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C 1/8" x 6" D 3/16" x 8" D 5/32" x 8" D 13/64" x 8" D 7/32" x 8" D 1/4" x 8"

Pitch 1/4" 0.325" 0.370" 3/8" 7/16" 1/2"

ITEM PRICE 2910925 2.79 2910933 2.79 2910117 2.79 2910118 2.79 2910119 2.79 2910941 2.79

A) 10 PC 5-1/2" NEEDLE FILE SET

Vinyl grips 1/8" dia. 2921823 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 FILE BRUSH

B) 10 PC 5-1/4" RIFFLER NEEDLE FILE SET

Variety of round, flat, square, and triangle curved files. 2925394 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 • Wire brush: 1-1/2" x 6" • O’all length: 9-1/4" • For cleaning debris out of files 2920506 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

FILE HANDLE KIT

399

PLASTIC FILE HANDLES Wt. 0.1 lbs.

• Ergonomic shape and rubber coating for better comfort and control • 4 interchangeable handle inserts fit most files 8000697 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

549

2910026 – Small 2910027 – Medium 2910028 – Large 2910029 – Extra Large . . . . . . . . . . . . . . . . . . . . .

249/ea

TAPE MEASURES TAPE MEASURES

Blade brake on thumb, bottom, and side.

258

E & F feature:Tough ABS case with non-slip rubber case jacket for improved handling, thumb blade lock, belt clip, and 16" stud markings Style Stand Out Wt. (lbs.) ITEM PRICE E 12 ft. x 5/8" SAE 4 ft. 0.3 8051038 2.99 E 16 ft. x 3/4" SAE 5 ft. 0.4 8051010 4.99 E 25 ft. x 1" SAE EZ Read 7 ft. 0.7 8050976 7.99 E 33 ft. x 1-1/4" SAE 9 ft. 1.4 8050949 12.99 F 12 ft. x 5/8" SAE/Metric 4 ft. 0.3 8051083 2.99 F 16 ft. x 3/4" SAE/Metric 5 ft. 0.5 8051029 4.99 F 25 ft. x 1" SAE/Metric 7 ft. 0.8 8050985 7.99 F 33 ft. x 1-1/4" SAE/Metric 9 ft. 1.6 8050967 12.99 G 100 ft. x 1/2" SAE/Metric closed reel – 1.2 8001628 9.99 H 100 ft. x 1/2" SAE/MM open reel – 1.0 8051145 9.99 H 165 ft. x 1/2" SAE/MM open reel – 1.3 8051154 14.99

MEASURING TAPES

A) SAE CONTRACTOR TAPE MEASURE

A N D

• Soft Touch™ rubber grip and thumb lock for comfort and control • Bright orange colour is easy to spot • Rubber shock absorber extends tip life • 16" stud and 16.2" truss joist markings 3/4"

16 FT 2940101 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 1" X 25 FT 2940102 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . X

9 1599 99

B) DOUBLE SIDED TAPE MEASURE

• 1" x 25 ft. (8 meters) • SAE one side, metric other side • Double ended hook and belt clip 2940160 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1399

100 FT HI-VIZ® MEASURING TAPE

CONTRACTOR MEASURING WHEEL

• Bright orange Hi-Viz® case • Double sided blade with SAE and metric markings • Clear coated blade protection for more durable markings • Stud markings at every 16" • Folding end hook/ring combination • Belt clip 99 2940154 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

LINE MARKING GAUGE

• 12-1/2" dia. wheel • Suitable for long indoor measurements such as manufacturing plant layout or outdoor measurements on firm and smooth surfaces • Dial indicator measures up to 9,999 ft. 11" (almost 2 miles) without resetting • Retractable handle adjusts for comfortable measurements 2940109 – Wt. 5.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

O O L S

9999

CHALK LINES • 6"/15 cm ruler with steel and pencil tips included • Marks lines on most material including wood, brass, aluminum, and steel • Metal face plate for long wear • Ruler graduated in 1/16" and 2 mm increments 99 8031435 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT TIPS

5 steel and 5 pencil tips for 8031435 marking gauge. 8048775 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.99

FISH TAPE

D C) 100 FT with FINGER GRIP 2970249 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Used for threading electrical wire, telephone wire, cable, etc., in limited access areas. 50 FT. REEL 8009665 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 100 FT. REEL 8003756 – Wt. 3.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

599

D) 100 FT

Tough high impact fluorescent green case for good visibility. 99 2970120 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

19 2999 99

E) 8 OZ REPLACEMENT POWDERED CHALK Wt. 0.6 lbs. 2970121 – RED 2970122 – BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.99/ea

259

LASER LEVELS

H A N D

A) LASER LIGHT GOGGLES 8036911 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

B) 12" LASER LEVEL

• With nylon carrying case • Vertical and horizontal vials 2940163 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

18" LASER LEVEL

• Laser diode: 630-680 nm • Vertical and horizontal vials • Metal housing • 328 ft. (100 m) max. range • Magnet attaches to any ferrous metal surface • Requires 2 “AAA” batteries 2940137 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

2499

C) 18" LASER LEVEL KIT

• 360° rotary base • 90° laser point adapter with 45° increments • Line projection adapter with 45° increments • Tripod height: 4-1/2 ft. ext.; 1-1/2 ft. ret. • 328 ft. (100 m) max. range • Case 8038820 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

6499

LASER PLUMB BOB

TECH TIP

One-man operation and increased accuracy are some of the benefits of a laser level. Laser levels are used in a variety of home improvement, landscaping, and construction applications.

• Calibrated to 0.15° • Laser beam can be shot upward or downward • Can also be used as a conventional plumb bob • Battery included 8001900 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

LEVELS LEVELS D D) LINE AND SURFACE LEVEL 2944940 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . E) 24" MAGNETIC UNITEK™ LEVEL

• Top reading window • Aluminum construction 2944296 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

7-1/2" V-GROOVE MAGNETIC LEVEL

260

249

2199

EXPANDABLE LEVEL

• Powerful V-groove magnetic base aligns perfectly to pipe and conduit • Reads vertical, horizontal, or at 45° angle 99 2940026 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 3 vials • Expands from 24" to 51" 8004719 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3999

LEVELS E A

B F

A N D

A) CROSS CHECK LEVEL

• Screw holes for easy mounting on tools and work surfaces • Has 2 vials at right angles to each other • O’all dim.: 2-3/8" x 1-3/4" x 1/2" ¢ 2940071 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

B) 4" LEVEL

• 2-vial level with magnetic base • O’all dim.: 4" x 1-3/4" x 3/4" 2940139 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

E) PLASTIC LEVELS

• Metal edge • Has vials for vertical, horizontal, and 45° angle 24" LONG 2940142 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 48" LONG 2940143 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

899 1399

F) 24" TOP READ MAGNETIC LEVEL

C) 9" TORPEDO LEVEL

V-groove magnet attaches to pipes, etc. 2940141 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) MAGNETIC POST LEVEL

• Reads plumb and level • Comes with elastic strap 8000771 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

• Top reading window • Aluminum construction 8007471 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

G) 78" ALUMINUM LEVEL

499

SQUARES with LEVELS

Top read vial. 8016871 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3999

O O L S

TRIANGLE SQUARES

I K

H J

399

1199

J) PROFESSIONAL COMBINATION SQUARE

• Use for making accurate 45° and 90° markings, measuring and checking depth • Aluminum frame with level and hardened scriber for fast and accurate marking • 12" satin steel blade 99 2944320 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

8" T-BEVEL

24" x 48". 8043182 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

K) ALUMINUM TRIANGLE SQUARE

599

L) 12" POLYSQUARE™

I) POCKET SIZE COMBINATION SQUARE

• Die-cast zinc body with solid brass hardware • 6" ruler with level and scribe 2940089 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Measures: 7-1/4" x 7-1/4 x 10-1/4". 2921468 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H) POLY TRIANGLE SQUARE

• Orange colour makes it easy to find • Markings are moulded in • Built-in level • O’all dim.: 7-1/4" x 7-1/4" x 10-1/4" 2940105 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

• All markings are moulded into the square • Fraction conversion table • Rafter cutting guide • Can be used for marking 45° and 90° angles and as a saw guide • O’all dim.: 12" x 12" x 17" 99 2940061 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

M) METAL TRIANGLE SQUARE

• Use as a 45° or 90° saw guide for rafters, etc. • Cut any angle • O’all dim.: 7-1/4" x 7-1/4" x 10-1/4" 2940086 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

STEEL TRADESMAN SQUARE

24" x 2" body, 16" x 1-1/2" tongue. 2944346 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

261

SQUARES

A N D

METAL T-SQUARE

A B

24" x 48". 8016988 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C

T O O L S

MICROMETERS

A) 12" x 8" STEEL UTILITY SQUARE 2940090 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . B) 8" T-BEVEL

499

Set at any angle. 2940091 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

C) 24" x 16" STEEL RAFTER SQUARE

Yellow enamel finish with black markings. 2940093 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

1599

SQUANGLE • Can be assembled in 4 different positions • Use as a bevel to determine and mark angles • Can be set as a carpenter and T square • Includes rafter gauge on ruler and leveling vial in arm 99 2940823 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Complete with locking lever and ratchet • Graduated to 0.0001" D) 1" OUTSIDE MICROMETER

0 to 1". 2940393 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1599

E) 2" OUTSIDE MICROMETER

1" to 2". 8009567 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

CALIPERS F

J J) 6" STAINLESS STEEL DIAL CALIPER

• Range: 0-6" (0-15 cm) • Resolution: 0.001" (0.02 mm) 2940252 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

All calipers include: • Graduations of 0.1" (1 mm) • Depth measuring blade F) 6" METAL CALIPER

• Range: 0-6" (0-15 cm) • Thumb roller adjust with top lock screw 2940003 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

G) 4" BRASS CALIPER

Range: 0-4" (0-10 cm). 2940116 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

H) 6" STAINLESS STEEL VERNIER CALIPER

• Range: 0" to 6" (0-15 cm) • Resolution: 0.001" (0.02 mm) • Thumb roller adjust with top lock screw 8009530 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

I) 8" STAINLESS STEEL VERNIER CALIPER

262

• Fine adjust knob with top lock screws • Range: 0" to 8" (0-20 cm) • Resolution: 0.001" and 0.02 mm 8009558 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3999

K) 6" CARBON FIBRE DIGITAL CALIPER

• Range: 0-6" (0-150 mm) • Resolution: 0.01" (0.1 mm) 2940097 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4999

L) STAINLESS STEEL ELECTRONIC DIGITAL CALIPERS

• Can read metric system or SAE system, set zero at any position, holds measuring reading • High accuracy, fine adjustment wheel, convenient reading and clear display • Resolution: 0.0005" (0.01 mm) • Batteries and case included 6" DIGITAL

Range: 0-6" (0-150 mm). 2940046 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

6999

8" DIGITAL

2999

Range: 0-8" (0-200 mm). 2940172 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9999

METAL CALIPERS and DIVIDERS

SPECIALITY MEASURING TOOLS B

DIVIDER

INSIDE

OUTSIDE

INSIDE

DIVIDER

O’all Wt. Range Length (lbs.) ITEM PRICE 7" 0 to 6" 0.2 2940025 3.99 9" 0 to 8" 0.3 2922110 4.99 13" 0 to 12" 0.4 2940044 6.99 7" 1/2" to 6-3/4" 0.2 2940024 3.99 9" 1/2" to 9" 0.3 2922102 4.99 13" 1/2" to 12-3/4" 0.4 2940043 6.99 7-3/4" 0 to 6-1/4" 0.2 2940042 3.99 9-1/2" 0 to 9-1/4" 0.2 2922094 4.99 14" 0 to 12" 0.5 2940045 6.99

3 PC 8" DIVIDER & CALIPER SET

Inside and outside calipers, plus divider. 2940260 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . .

1399/set

A N D

A) CENTRE FINDER

• Use with round, square, hexagon, octagon stock • Max. 8" circle, octagon, and square • Max. 5-3/4" hexagon 99 2940245 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

B) DEPTH GAUGE

• For precise measurement of small holes and slots • Measures to a depth of 6" or 15 cm 99 2940074 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) 4 PC SMALL HOLE GAUGE

• Provides measurements for accurate drill hole calibration • From 0.1" to 0.5" (3 mm to 13 mm) 8039080 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

T O O L S

SPECIALITY GAUGES

6" CONTOUR GAUGE D • Easily duplicate complex patterns • Good for finish carpenters, etc. 2940030 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) MULTI-USE RULE and GAUGE

899

PROTRACTORS F G

• Drill point gauge for 59° drill points • Bevel protractor to measure and lay out angles • Centre finder locates centres of shafts or circles • Circle divider (up to 9 equal parts) splits circles into sectors, regular polygons, and polygrams • Tap and drill table shows popular tap sizes with correct drill sizes for National form of thread • 4" rule has etched graduations in 64ths and mm • Stainless steel construction 99 2940157 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) SHEET METAL GAUGE

H F) PROTRACTOR ANGLE SQUARE

• 4 functions: saw guide, drawing circles, marks parallel lines, and calibrates distance • Used to measure or transfer: outside, inside, and sloped angles • Used for miter angle layout • Features a level on arm 99 2940106 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Gauges uncoated sheet metal, plate iron, and steel • Gauge numbers are U.S. standard 0 to 36, based on weights in ounces per square inch • Decimal equivalents are stamped on reverse side • Chrome finished, heavy gauge tool steel is hardened and tempered 99 2940158 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SHEET METAL GAUGE

G) 0°-180° PROTRACTOR

• 0° to 180° in 1° graduations • O’all length: 7-3/4" 8017479 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

H) DEPTH AND ANGLE PROTRACTOR

• Measures angles from 0 to 180° • Measures depth from 0 to 6" • All metal construction 8006141 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

749

• US standard • Inches and gauge measurements • Measures uncoated sheet metal, steel and plate iron 99 8003604 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

263

H A N D

CONVERSION TABLE • Extensive equivalents formulas and fraction/decimal/metric equivalent chart • Converts length, area, volume, weight, and temperature in mm, gal./litre, pounds/kg, fahrenheit/celsius, ft./m, yards/m 99 2970088 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PRECISION MEASURING TOOLS

MAGNETIC POLYCAST PROTRACTOR

T O O L S

C A B

A) 7" HEIGHT GAUGE

• 0" to 7" (0 to 19 cm) range • 1/16" and 1 mm graduations • 1/128" (0.05 mm resolution) 2940098 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Adjustable pointer to mark and transfer angles • Easy reading protractor dial with 1° graduations • Dampened pendulum for quicker readings • Magnetic base and back adheres to ferrous surfaces • Pitch angle calculator on back • O’all dim.: 4-3/4" x 4-1/4" x 1-1/4" 99 2940064 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

RULERS

B) MAGNETIC BASE

• Use with precision deflection gauges • Features arm with fine adjustment • Magnetic base with on/off switch • Magnetic attraction 143 lbs (65 kg) • Working force Mag. 588N 2944460 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

F G

2499 E) 12" STEEL RULER

C) 2-1/4" DIA DEFLECTION GAUGE

• Use with magnetic base • 0.1" travel per rev. of gauge, total travel: 1.0" • Graduations: 0.001" 2970986 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

D) 6 PC TELESCOPING GAUGE SET with POUCH

• Determines size of holes, slots, and recesses • Measuring range: 5/16" to 1/2" (8 - 12.7 mm), 1/2" to 3/4" (12.7 - 19 mm), 3/4" to 1-1/4" (19 - 32 mm), 1-1/4" to 2-1/8" (32 - 54 mm), 2-1/8" to 3-1/2" (54 - 89 mm), and 3-1/2" to 6" (89 - 152 mm) 99 2940716 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• SAE and metric • Black lettering on stainless steel • Back of ruler has conversion table for converting inches to metric, fractions to decimal, whitworth to UNF, and tap drill chart 49 2940067 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . F) 6" METAL POCKET RULER 2940526 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . G) YARDSTICK

3 299

• Yellow enamel finish steel with black markings • Metric and SAE 99 2940092 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

MAGNETS & PICK UP TOOLS SCREWDRIVER MAGNETIZER/ DEMAGNETIZER

264

• Pass the screwdriver through the centre hole to magnetize, slide through channel to demagnetize • Approx. 1" x 1" x 1" 3891710 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

HANDLE MAGNETS

Lift, suspend, hold, or retrieve metal objects. Lift Cap. Wt. (lbs.) ITEM PRICE Up to 25 lbs. 0.1 2920638 8.99 Up to 50 lbs. 0.4 2920639 11.99 Up to 100 lbs. 0.7 2920640 14.99 Up to 150 lbs. 2.3 2920641 24.99 Up to 225 lbs. 4.3 2920642 44.99

PICKUP TOOL with SPRING LOADED FINGERS

TELESCOPING MAGNETIC PICK UP TOOL

24" LONG.

199 49 2970033 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2944734 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

36" LONG.

Handle extends from 16-1/4" to 27". 2915155 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

A N D

MAGNETIC PICK UP TOOLS

A) MIRROR and MAGNETIC PICK UP TOOL

Telescoping shaft extends from 6" to 18-1/2". 2970238 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

B) BENDING PICK UP MAGNET

• 19" bendable shaft can be shaped and reshaped and will lift up to 0.4 lbs. • Bends around corners and into other hard to reach areas 99 2971257 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

O O L S

TELESCOPING MAGNETIC PICK UP TOOLS (C to E) C) Extends: 7" to 23". 99 2970029 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) Extends: 6" to 24"

• Flexible head and pocket clip • 5 lb. magnet 99 2970154 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . E) Comes with 3 adapters: 5 lb. flex, 5 lb. straight, and 3 lb. straight. 99 2970263 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

F) MAGNETIC PICK UP TOOL WITH FLEX SHAFT

5 lb. capacity. 2970228 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

G) RELEASING PICK UP MAGNET

• Pull handle up to release metal pieces • 6-3/4" high x 3-1/2" magnet dia. 2970197 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

H) LONG HANDLED RELEASING MAGNET

• 3-1/2" dia. magnet • 36" overall length • Pull handle up to release metal objects 8043672 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

MAGNETS I) MAGNETIC STRIP

1/2" x 30" adhesive backed. 3891926 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

249

J) MAGNET TAB 10 PACK

• With heavy duty foam adhesive • Ten 1" x 1" x 1/8" magnets 3891991 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

249/pkg.

K) CERAMIC MAGNETIC RINGS

Two 1-3/4" O.D. x 3/4" I.D. x 1/8" rings. 49 3891959 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . /pkg.

L) CERAMIC MAGNETIC DISCS Wt. 0.1 lbs.

Dia.

Ht.

1" 1/4" 11/16" 3/16" 1/2" 3/16"

Qty.

ITEM

PRICE

2 3 10

3891942 3891934 3891918

2.49/pkg. 2.49/pkg. 3.49/pkg.

M) CERAMIC MAGNET

One 1-7/8" x 7/8" x 3/8" magnet. 3891967 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Magnet has PVC housing to prevent damaging paint • Will hold signs, tow truck lights, antennas, etc. on the roof of a vehicle • O’all dim.: 3" x 3" x 1/2", 1/4" mount hole 99 3890133 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

P) SUPER-MAG

899

• O’all dim.: 2-1/2" x 3/8" with a 1" dia. ring to which a rope, chain, or hook could be attached • Will lift up to 82 lbs. 99 3892304 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

N) MAGNET

• 2" dia. with rubber knob for handle • Lifts 38 lbs. 3892296 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

O O) ROOF MAGNET

265

H A N D

T O O L S

MAGNETIC FLOOR SWEEPERS B

B) MAGNETIC FLOOR SWEEPERS

May be used to clear walkways, factory aisles, loading docks, parking lots, etc. 12" WIDE MAGNET A) MINI MAGNETIC FLOOR SWEEPER

• Lightweight 14-1/2" magnet easily picks up small metal objects • Ideal for driveways, walkways, factory, store aisles, and lawns • 41" handle and small 3" diameter wheels allows for use under work benches, vehicles, etc. 99 8000698 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FLOOR MAGNETS

• Will pick up 3.2 lbs. of 8 penny nails from 2" height • 48" handle 2920637 – Wt. 17.7 lbs. . . . . . . . . . . . . . . . . . . . .

11999

24" WIDE MAGNET

• Will pick up 7.5 lbs. of 8 penny nails from 2" high • 48" handle 99 8040498 – Wt. 27.6 lbs. . . . . . . . . . . . . . . . . . . . . .

159

C) MAGNET PICK-UP

• 50 lb. capacity • 35" handle will reach under vehicles, work benches, etc. 2920633 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

D) MAGNETIC SWEEP

• Quickly clean up nails, hardware, or any steel scraps • 12" long magnet with pull strap • Will pickup a 3" nail from over 2" away • Holds 1.5 lbs. of 3" nails • Will pull 65 lbs. 3890141 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C D

6999

MIRRORS & MAGNIFIERS MIRRORS

BRASS MAGNIFYING GLASS with MINI SCREWDRIVERS

G H

• 3" dia. (76 mm) • 3x magnification • Contains 1 mini Phillips head screwdriver and 2 mini slotted head screwdrivers 8025200 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

MAGNIFYING GLASS with

E) 2" DIA. TELESCOPING MIRROR 2970237 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . F) INSPECTION MIRROR with FLEX SHAFT

499 COMPASS

21" handle, 2" x 3" mirror. 2970229 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

G) MAGNETIC PICK UP and MIRROR

• Magnet: 5" retracted, 22" extended • 2" mirror: 9" retracted, 17" extended • Both units have multi-angle ball joints 2926749 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

H) TELESCOPIC INSPECTION MIRROR

266

• 3 section telescoping handle extends from 14-1/2" to 32" • 3-1/2" x 2" mirror with ball joint to allow 90° swivel • Great for auto mechanics and home workshop 99 2920261 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Dual power style optical grade magnifying glass • Plastic frame with racquet style handle and built in compass • Separate lenses for each power • Great for the crafter, artist, hobbyist, traveller, etc. 4x and 8x POWER - 75 mm LENS 8029117 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3x and 6x POWER - 90 mm LENS 8029091 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399 499

FOLDING MAGNIFYING LENSES A) 5/8" DIA. LENS FOLDING MAGNIFYING GLASS

10 power. 2970190 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

249

B) 1-3/8" DIA. LENS TRIPLE MAGNIFYING GLASS

3x magnification per lens. 2970188 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

EYE LOUPES

A N D

Ideal for jewelers, stamp collectors, hobbyists, and science projects. C) 4X JEWELER’S MAGNIFYING EYE GLASS 2970139 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . D) 10X POWER ALUMINUM EYE LOUPE 2920013 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199 299

O O L S

FOLDING MAGNIFIER • 2-1/2" dia., 10x high power focus loupe • Great for small print or fine details on objects • Folds up for easy storage 8004562 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

MAGNIFIERS E) 2X MAGNIFYING GLASS

2" magnifying glass. 2970158 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 3" dia. lens x 7" long. 2970156 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

249 299

F) THIRD HAND with MAGNIFIER

• 2 alligator clips and 2x, 2-1/2" magnifying glass • 6 ball joints for holding objects at all angles, leaving hands free to glue, solder, repair, or assemble 99 2970341 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) HANDS FREE FOLDABLE 3X MAGNIFIER

4" dia. magnifying glass in a foldable stand. 2970187 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

H) MAGNIFYING GLASS with LIGHT

• 5x magnifier • Lens size: 3.3" • Requires 2 “AA” batteries (not included) 8001976 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

I) VISOR with MAGNIFYING LENS

FOLDED

• 2 interior flip down lenses for closer viewing and single external flip down lens • Velcro headband fastener • Visor flips up out of the way 99 5040105 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

J) MAGNIFYING GLASS with FLEXIBLE SHAFT

• 3.5x magnifier • 20" flexible shaft with clamp 8001985 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199

FLASHLIGHTS MAGNETIC LED FLEX FLASHLIGHT • Bright long life LED light, consumes less power than traditional light bulbs • Magnetic tip • Flexible 14-1/2" shaft • Batteries included 99 8045108 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

267

FLASHLIGHT GLASSES

A N D

• Light your work and have your hands free • Can be worn over regular glasses • Uses 4 “AAA” batteries (not included) 5050471 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

FLEXIBLE FLASHLIGHTS A

599

MAGNETIC PICK UP TOOL with LED LIGHT

B A) ULTRA THIN FLEX LIGHT

• 24" flexible handle with 18" extension • Built-in light with changeable mirror and magnetic pickup 99 2970200 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

B) FLASHLIGHT with MAGNETIC TIP

• High visibility orange handle • 16" flexible shaft • Batteries included 8053811 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

HOBBYIST TOOLS

• Narrow flexible shaft illuminates confined areas • Removable magnetic tip holds light in place • Uses 2 “AA” batteries (not included) • O’all length: 17" 99 2970005 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

INSULATED HEMOSTATS

HEMOSTATS

STRAIGHT

4-1/2" straight end. 8023747 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 7" straight end. 8023710 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 799

CURVED

4-1/2" curved end. 8023783 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 7" curved end. 8023729 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) 3-1/2" STRAIGHT

• 2 locking settings • Great for electronics projects, crafters etc. • Straight jaws 8029171 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 799

LEATHER PUNCH with EYELET FASTENER

D) 3-1/2" CURVED

• Scissor style forceps clamp • 3-1/2" long, 3 locking positions 8029162 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

E) 4-1/2" CURVED

• Scissor style forceps clamp • 4-1/2" long, 3 locking positions 2970232 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

249

F) CLAMP and CUTTER

• 6-1/2" scissor style clamp with 3 locking settings • Built in cutting blades • Great hobby/craft item and toolbox item • Stainless steel 99 8029153 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• 1.5, 2.5, 3.5, 4.0, and 5.0 mm punches • Includes package of 100 chrome, brass, copper, and black coloured eyelets 2970003 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

100 PC REPLACEMENT EYELETS

For above. 2970261 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 2.29

STAINLESS STEEL TWEEZERS G

• Assorted sizes and styles of tweezers • Great for hobbyists and crafters G) 4 PC TWEEZER SET

Approx. 4-1/2" long. 8035477 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

268

H) 5 PC TWEEZER SET 8035468 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399 499

PAINT BRUSHES

12 PC BRUSH SET

A) ECONOMY PAINT BRUSHES

1-1/2" wide. 2944411 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 3" wide. 2944403 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

99¢ 149 B) 20 ARTIST BRUSH ASSORTMENT 49 2970032 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 2 /set

• Pack of 12 acid brushes • Great for plumbers, electronics and more • Strong steel handle makes applying pre-solder acid flux easy and clean 99 8037910 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . /pkg.

MINI DRILL SETS

25 PC HOBBY TOOL SET

C D

C) PUSH DRILL

• Handheld push drill • Fits #80 to 1/16" drill bits • 7-1/4" long 2910186 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

A N D

T O O L S

D) PRECISION DRILL SET

Contents: tweezers, long nose pliers, side cutters, 6 precision screwdrivers, 3" extension, 5, 6, 8, 10 mm sockets, 3 Phillips screwdrivers, 3 slotted screwdrivers, 3 Torx screwdrivers, adapter, and handle 8025442 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

• Ideal for boring small holes when working on miniatures, models, or jewelry • Drill bits store in the end of the tool • Knurled grip for greater accuracy • Includes 6 precision drill bits (#52, #56, #60, #66, #70, #74) and pocket clip 99 2910030 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CUTTING TOOLS UTILITY KNIVES and SCRAPERS E) ALL METAL SCRAPER with 5 BLADES 99 2970055 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . PKG of 10 REPLACEMENT BLADES 2970036 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 1.99/pkg. F) SLIM UTILITY KNIFE

Snap off blades. 8007346 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

G) THUMB LOCK UTILITY KNIFE

Snap off blades. 8007293 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . PKG of 10 REPLACEMENT BLADES 8007300 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

299

2.49/pkg.

7 PC ART KNIFE SET

H) HAND KNIFE with RETRACTABLE BLADE 99 2971075 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . PKG of 10 REPLACEMENT BLADES 8007337 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . 2.49/pkg.

2 PC SCISSOR SET

Kit includes handle and 6 assorted utility blades. 8025237 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . PKG of 5 REPLACEMENT BLADES 8025246 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

299 Includes one 7" and one 10" pair of scissors.

1.29/pkg. 2919074 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

269

KNIVES

A N D

B) LARGE CUTTER with DIAL LOCK 2970095 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT BLADES

799

Pkg. of 10. 2970090 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99 C) LARGE CUTTER with RUBBER GRIP

Non-slip rubber grip for maximum comfort and control. 2970105 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

PKG of 50 REPLACEMENT BLADES

Fits 2970105 and 2970095. 2970115 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . 19.99/pkg. D) HEAVY DUTY CUTTER

T O O L S

1399

• Comfortable handle with non-slip rubber grip • Features accurate control, effective cutting 2970096 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A) SLIM UTILITY KNIFE 2970094 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT BLADES

REPLACEMENT BLADES

299

Pkg. of 10. 2970091 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 4.99 /pkg.

SELF LOADING UTILITY KNIVES

Pkg. of 5. 2970092 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . 5.99 /pkg. E) EXTRA HEAVY DUTY CUTTER

Cushion grip. 2970202 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1399

• Automatically reloads next blade • Ergonomic design • Soft touch rubber grip F) SMALL

SCRAPING & CLEANING TOOLS

8002884 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . G) LARGE

Blade cartridge holds 5 blades.

699

Blade cartridge holds 6 blades. 8002887 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

899

DENTAL TOOLS

4 PC 7" LONG PRO-PICK and HOOK SET H

H) 3 PC DENTAL TOOL KIT

Inspection mirror, pick tool, and 6" tweezers. 2970945 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . Great for separating wires, retrieving small parts, scribing, adjusting, or o-ring removal. 99 2971240 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

I) 4 PC 6" DENTAL PICK SET

Double ended stainless steel picks. 2924744 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

SCRAPING TOOLS J) 2-IN-1 SEAL and O-RING PICK

• Great to remove or install hard-to-reach seals and O-rings and to clean out threading and crevices • Hardened and tempered chrome vanadium steel • Knurled handle “C” hook x 45° point 99 8017488 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

K) STRAIGHT BLADE GASKET SCRAPER

1" wide x 11" long. 2990122 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

449

L) 6 PC CARVING SET

• Durable alloy steel tips • Plastic handles with rubber grip 8014258 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

N) 5 PC SCRAPER and REMOVER SET

11" and 8-1/4" multi-purpose scraper, 8" scratch awl, 9" cotter pin puller, and radiator hose remover. 99 2926673 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

M) 5" PICK and HOOK SET

270

Variety of 4 picks and hooks. 2921351 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

METAL STAMP SETS

SCRIBES

NUMBER STAMPS

A A) 8-3/4" MACHINIST SCRIBE

Heat treated precision steel points. 2940114 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 4" SCRIBER with MAGNETIC PICKUP 2943942 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199 399

• 9 stamps • Includes 0 - 8 (6 can be used as a 9) Size Wt. (lbs.) ITEM 1/8" 0.7 3431954 1/4" 1.2 3430026 5/16" 1.8 3432275

PRICE 3.99 4.99 8.99

LETTER STAMPS

9" ALL PURPOSE AWL

• Black plastic handle, chrome vanadium steel tip • Blade: 5" 99 2910159 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• 27 stamps • Includes A - Z plus “&” Size Wt. (lbs.) 1/8" 2.0 1/4" 3.5 5/16" 5.3

T ITEM 3431947 3430028 3430027

PRICE 8.99 14.99 24.99

MULTI PURPOSE ENGRAVER with DIAMOND TIP

GLASS CUTTER • 7" long • Diamond tip • Handle has built-in glass snapper 2920666 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

• Requires 2 “AAA” batteries (not included) • Freespeed: 11,000 to 12,000 RPM 8021053 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SHARPENING STONES

O O L S

1499

C) ALUMINUM OXIDE COMBINATION SHARPENING STONE

Size: 6" x 2" x 1". 2970011 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

A N D

99¢

D) 2 PC COMBINATION SHARPENING STONE SET

• Ideal for sharpening knives, hatchets, and small hand tools • Coarse and fine stones • 6" x 2" x 1" and 3" x 1" x 3/8" 99 2970054 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

E) DIAMOND GRIT FILE

• 200 grit diamond coating • Plastic handle 8025415 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

TOOL BOXES & STORAGE

799

• Blue: 180 grit; red: 260 grit; yellow: 360 grit • Ideal for sharpening high speed and carbide steel • 3 layers of diamond are nickel bonded to an alloy steel frame 99 8025399 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PLASTIC TOOL BOXES

• Removable inner tray • Flip up, see through lid for storing small items • Sturdy lightweight design Size Wt. (lbs.) 12-1/2" 1.2 16" 1.9 19" 3.4

ITEM 8000815 8000806 8000799

F) 3 PC DIAMOND HONE SET

INTERLOCKING PLASTIC STORAGE BOX

PRICE 8.99 14.99 19.99

• Boxes can be locked together in many configurations • See through drawers with removable dividers • O’all dim.: 1-3/4" x 3-1/2" x 6-1/2". 49 3480056 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

271

TOOL BOXES

A N D B

T O O L S

D) 6 DRAWER MECHANIC’S TOOL CHEST

• O’all dim.: 26"W x 12"D x 14-1/2"H • Drawer: 23"W x 10-1/2"D x 2-1/2"H • 2 drawers: 23"W x 10-1/2"D x 2"H • 3 drawers: 7"W x 10-1/2"D x 2"H 3480013 – Wt. 49.2 lbs. . . . . . . . . . . . . . . . . . . . .

THESE HEAVY DUTY TOOL STORAGE UNITS FEATURE:

E) 10 DRAWER MECHANIC’S TOOL CHEST

• Unique electrostatic powder coating • Staked piano hinge and an internal locking mechanism for greater security • 1-piece drawer slides • Double walled construction • Hemmed edges on all sides • Full length drawer pulls • Heavy duty casters on all roller cabinets

• O’all dim.: 26"W x 12"D x 18-7/8"H • 6 drawers: 7"W x 10-1/2"D x 2"H • Drawer: 7"W x 10-1/2"D x 6"H • Drawer: 23"W x 10-1/2"D x 2-1/2"H • Two drawers: 23"W x 10-1/2"D x 2"H 3480012 – Wt. 66.9 lbs. . . . . . . . . . . . . . . . . . . . .

• O’all dim.: 15"W x 18-3/4"D x 30-1/2"H • 4 drawers: 11"W x 16-3/8"D x 2"H • 2 drawers: 11"W x 16-3/8"D x 4"H • Drawer: 11"W x 16-3/8"D x 6"H 3480015 – Wt. 61.0 lbs. . . . . . . . . . . . . . . . . . . . .

G) 8 DRAWER ROLLER CABINET

A) 21" FLAT TOP TOOL BOX

O’all dim.: 21"W x 8-3/4"D x 9"H. 3480038 – Wt. 12.8 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 20" HIP ROOF TOOL BOX

O’all dim.: 20"W x 7"D x 8"H. 3480017 – Wt. 7.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2199

C) CIRCULAR SAW/POWER TOOL BOX

O’all dim.: 13-1/2"W x 10"D x 10"H. 3480014 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

21999

F) 7 DRAWER HANG-ON CABINET

A) 16" FLAT TOP TOOL BOX

O’all dim.: 16"W x 6"D x 6-1/2"H. 3480018 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

14999

1999

• O’all dim.: 27"W x 18-3/4"D x 42-3/8"H • 4 drawers: 11"W x 16"D x 2"H • 2 drawers: 23"W x 16"D x 2"H • Drawer: 23"W x 16"D x 4"H • Drawer: 23"W x 16"D x 6"H • 5" x 2" wheels 3480011 – Wt. 126.0 lbs. . . . . . . . . . . . . . . . . . . .

23999

34999

TOOL BAGS H H) CANVAS TOOL BAG

• 24 outside pockets • 18 oz natural cotton • O’all dim.: 14" x 7" x 9" deep 2970262 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Tools not included

1599

I) NYLON TOOL BAG

272

• 8 padded side pockets • Includes shoulder carry strap • 15" x 9" x 9" deep 8044350 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

MAGNET TOOL HOLDERS

TOOL ROLLS A

Tools Not Included

SMALL – 11 POCKETS (SHOWN)

13-1/2" x 15". 8000959 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

LARGE – 22 POCKETS

13-1/2" x 28". 8000968 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . Tools Not Included

Organizes, holds, displays tools and other metal items. A) 13" MAGNETIC TOOL HOLDER

Two 1/4" dia. mounting holes 10" apart. 2920635 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

MEDIUM – 18 POCKETS

15" x 20" heavy duty canvas. 8023462 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

SOCKET HOLDERS

Two 1/4" dia. mounting holes 16" apart. 2920636 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

16 POCKET TOOL APRON

Holds shallow and deep sockets with size on top of post. 1/4" DRIVE

13 shallow & 13 deep, 1/8" to 5/8". 2990248 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 14 shallow & 14 deep, 4 to 15 mm. 2990249 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

T O O L S

1599

24" MAGNETIC TOOL HOLDER

2199 B) 18" MAGNETIC TOOL HOLDER 99 2970239 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

A N D

1699 1699

3/8" DRIVE

• Made of sturdy canvas • Large and small pockets to carry a variety of items • Adjustable neck strap and waist strap with quick connect plastic buckle 5040187 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

12 shallow & 12 deep, 1/4" to 1". 2990229 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 15 shallow & 15 deep, 6 to 20 mm. 2990230 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1849 1849

1/2" DRIVE

1499

14 shallow & 14 deep, 3/8" to 1-1/4". 2990231 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 17 shallow & 17 deep, 10 to 27 mm. 2990232 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

WRENCH HOLDERS

1999 1999

MAGNETIC SOCKET HOLDERS

C) METAL WRENCH HOLDER

• Holds 13 wrenches • O’all dim.: 7-1/2" x 5" x 1" 2919116 – Wt. 0.4 lbs. . . . . . . . . . . . . .

399

D) PLASTIC MAGNETIC WRENCH HOLDER

• Holds 12 wrenches • O‘all dim.: 10" x 6" x 1" 8035510 – Wt. 0.4 lbs. . . . . . . . . . . . .

599

E) METAL WRENCH HOLDER

• Holds 12 wrenches • With carrying handle • O’all dim.: 9-1/2" x 6" x 1" 2926665 – Wt. 0.6 lbs. . . . . . . . . . . . .

699

F) LOW PROFILE WRENCH HOLDER

• Low profile fits 2" deep tool drawers • Wrench sizes are labeled • Tough ABS plastic SAE: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and 15/16" 99 8016808 – Wt. 0.3 lbs. . . . . . . . . . . METRIC: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, and 18 mm 99 8016817 – Wt. 0.2 lbs. . . . . . . . . . .

12 12

• Organizes metric and SAE sockets • Separate socket compartments allow you to keep your standard and deep sockets in 1 convenient holder • Powerful magnet holds sockets in tray Holds 28, 3/8" dr. sockets up to 1" or 24 mm. 99 2911022 – Wt. 2.1 lbs. . . . . Holds 22, 1/2" dr. sockets up to 1-1/8" or 27 mm. 99 2920205 – Wt. 2.4 lbs. . . . . .

273

SOCKET HOLDERS A) 3 PC SOCKET HOLDERS

A N D

• Each strap holds 16 sockets (48 sockets in total) • Mounts on wall or in tool box • 16-1/2" long with three 7/32" mounting holes 99 2919611 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

INDIVIDUAL SOCKET HOLDERS Wt. 0.2 lbs. 8000382 – 1/4" DRIVE . . . . . . . . . . . . . . . . . . . . . . . . 8000377 – 3/8" DRIVE . . . . . . . . . . . . . . . . . . . . . . . . 8000378 – 1/2" DRIVE . . . . . . . . . . . . . . . . . . . . . . . . B) 3 PC FLEXIBLE SOCKET HOLDERS

1.99 2.39 2.49

• Flexible, durable non-slip polyurethane conforms to, and will not scratch any surface • Impervious to corrosion, chemicals, and solvents • Holds 13 1/4", 16 3/8", and 14 1/2" sockets 99 2920212 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

O O L S

C) SOCKET TRAY

• 1-1/4", 2-3/8", and 1-1/2" rails attached to metal tray • Rails hold 10 sockets each 99 8058433 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) 3 PC SOCKET HOLDERS

E All our socket holders will hold sockets with 1/4", 3/8", and 1/2" drives.

• Plastic socket holders mount on 17-1/2" metal rail • Each strip holds 16 sockets 99 2920647 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E) SOCKET TRAY

Holds 20 1/4", 30 3/8", and 30 1/2" sockets. 8002252 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

ANTI-SLIP DRAWER LINER • Prevents tools from shifting or sliding • 3 mm thick • Black foam rubber • 24" x 48" 8058424 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

PARTS TRAYS

799

MAGNETIC PARTS TRAY

PARTS DISHES Keep small metal parts in place. 8" DIA. x 2" DEEP 8001881 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . MAGNETIC 8" DIA. x 1" DEEP 8002383 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299 599

274

999

ADJUSTABLE HIGH RISE TOOL TRAY

SERVICE CART

• Durable powder coat finish • 5" casters, 2 rigid, 2 swivel with brake • Trays 28" x 16" x 2" • O’all dim.: 37-1/2"W x 17"D x 34-1/4"H 8043681 – Wt. 59.4 lbs. . . . . . . . . . . . . . . . . . . . . .

9-3/8" x 5-3/8". 8007480 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

19999

• Height: 35" min., 48" max. • 24" x 17" tool tray with non-slip mat • Roll tools, parts and small diagnostic equipment directly beside the engine compartment 8008489 – Wt. 35.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

6999

TAP & DIE SETS TAPS

A B A) T-TAP WRENCH

Will hold #4 to 1/4" taps. 3408465 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

B) TAPS

Size 4-40 NC 6-32 NC 8-32 NC 10-24 NC 10-32 NF 1/4"-20 NC 1/4"-28 NF 5/16"-18 NC 3/8"-16 NC 1/2"-13 NC 1/8"-27 NPT 1/4"-18 NPT

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1

ITEM 3406295 3406303 3406311 3406329 3406337 3406386 3406394 3406402 3406428 3406469 3406485 3406493

1" HEXAGON DIES

PRICE 2.99 2.99 3.49 3.49 3.49 3.49 3.49 4.49 4.99 6.29 5.29 6.49

High carbon steel construction. Size Wt. (lbs.) 4 - 40 NC 0.1 6 - 32 NC 0.1 8 - 32 NC 0.1 10 - 24 NC 0.1 10 - 32 NF 0.1 12 - 24 NC 0.1 1/4" - 20 NC 0.1 1/4" - 28 NF 0.1 5/16" - 18 NC 0.1 3/8" - 16 NC 0.1 1/2" - 13 NC 0.1 1/8" - 27 NPT 0.1 1/4" - 18 NPT 0.1

ITEM 8030579 8030668 8030677 8030702 8030711 8030720 8030739 8030748 8030757 8030784 8030828 8030837 8030846

PRICE 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 4.99 7.99

DIE HOLDER For use with 1" round and hex dies. 3408069 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

A N D

T O O L S

899

TAP WRENCH • Will hold #4 to 3/8" taps • O’all length: 11" 3400155 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

TUNGSTEN ALLOY TAP and DIE SETS • High strength tungsten alloy construction • Rockwell hardness of HRC 60 • Adjustable tap wrench, T-handle tap wrench, die handle, screwdriver, screw pitch gauge, and case 12 PC TAP and DIE SET SAE:

NC sizes: 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, and 1/2"-13. 8039954 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

METRIC:

M6 x 1.0, M7 x 1.0, M8 x 1.25, M10 x 1.5, and M12 x 1.75. 99 8039963 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

39 PC TAP and DIE SET

45 PC TUNGSTEN TAP and DIE SET

• Contains large sizes up to 1" (M24) • Heat treated tungsten alloy steel construction • Rust resistant satin finish SAE SET

1" hex dies for easier threading Includes: 1 tap and 1 die for each of the following sizes: #4-40, #6-32, #8-32, #10-24, #10-32, #12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, and 1/8" NPT-27. 99 8039981 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Includes: 1 die and 1 tap of the following sizes: 1/4"20 NC, 1/4"-28 NF, 5/16"-18 NC, 5/16"-24 NF, 3/8"-16 NC, 3/8"-24 NF, 7/16"-14 NC, 7/16"-20 NF, 1/2"-13 NC, 1/2"-20 NF, 9/16"-12 NC, 9/16"-18 NF, 5/8"-11 NC, 5/8"-18 NF, 3/4"-10 NC, 3/4"-16 NF, 7/8"-9 NC, 7/8"-14 NF, 1"-8 NC, 1"-14 NF. 99 3410274 – Wt. 14.4 lbs. . . . . . . . . . . . . . . . . . . . . .

METRIC

METRIC SET

Includes: 1 tap and 1 die for each of the following sizes: M3 x 0.8, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 1.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 5, M12 x 1.75, and 1/8" NPT-27. 99 8039972 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Includes 1 die and 1 tap of the following sizes: M6 x .75, M6 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75, M14 x 1.5, M14 x 2.0, M16 x 1.5, M16 x 2.0, M18 x 1.5, M18 x 2.5, M20 x 1.5, M20 x 2.5, M22 x 1.5, M22 x 2.5, M24 x 1.5, M24 x 3.0. 8005712 – Wt. 14.7 lbs. . . . . . . . . . . . . . . . . . . . . .

SAE

124

12499

275

H A N D

THREADED INSERT INSTALLATION KITS

THREAD REPAIR FILES

• Installs threaded inserts into sheet metal similar to the way pop rivets are inserted • Includes inserting tool and 40 inserts SAE KIT

T O O L S

10 each of sizes #6-32, #8-32, #10-24, and 1/4"-20 (NC) machine thread. 99 2925204 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

METRIC KIT

10 of each: M3 x 0.5, M4 x 0.7, M5 x 0.8, and M6 x 1.0. 8002638 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

THREADED INSERTS

Wt. 0.4 lbs.

Thread Sizes ITEM PRICE 11, 12, 13, 14, 16, 20, 24 (TPI) 2910305 17.99 9, 10, 12, 16, 20, 27, 28, 32 (TPI) 2910306 17.99 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 2910308 18.99 3.0 mm

THREAD GAUGE 52 different metric and SAE sizes. 2940117 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

80 PC THREADED INSERTS

20 each of sizes #6-32, #8-32, #10-24, and 1/4"-20 (NC). 2925501 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Restore damaged external threads on studs, bolts, screws, plumbing pipe, and pipe fittings • Each file provides 4 to 8 different thread pitches • Restores rusted or corroded fasteners • Doubles as a screw pitch gauge • Length: 8-1/2" x 7/16" (213 mm x 12 mm)

849

1999 5 PC BOLT EXTRACTOR SET

100 PC SAE THREADED INSERTS

1/4"-20 (NC). 2921872 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2299

100 PC METRIC THREADED INSERTS

M6 x 1.0 mm. 8002711 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2299

STUD REMOVER

Extracts 1/4" to 5/8" bolts. 2926491 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

1999/set

SCREW EXTRACTOR SETS A

• Capacity: 1/4" to 3/4" dia. studs • Use with 1/2" dr. ratchet 2925113 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

SUPER OUTS

B A) 6 PIECE SCREW EXTRACTOR SET

• Extract 1/4" to 1/2" and larger bolts, studs, and screws • Works on left and right hand threads 2915171 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

• Sizes: #1 to #6, for use on 1/8" to 1/2" fasteners • Spiral flute 99 2920311 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . /set

B) 5 PC SCREW EXTRACTOR SET

2199/set

NUT SPLITTERS

C) 2 PC NUT SPLITTERS

1599

D) HEAVY DUTY NUT SPLITTERS

276

1499

5 PC BOLT REMOVER

C D Remove damaged nuts without bolt thread damage. Suitable for up to grade 5 (8.8 metric) nuts. 3/16" - 3/4" and 9/16" - 1-1/16" capacity. 2919587 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Chrome moly steel • Hardness: HRC 50 min. • For use on 3/16"-5/8" fasteners 8019912 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Self centering wobble tip with capacity: 7/16" to 3/4". 2910277 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1599

• For use with impact wrenches, ratchets, flat wrenches, and vice grip locking pliers • Fits standard and metric hex sizes 3/8", 7/17" (11 mm), 1/2", 9/16" (14 mm), and 5/8" (16 mm) • High carbon steel • Reverse spiral flutes grip bolts that are in almost any condition 99 8003156 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PRINCESS AUTO STEEL CENTRE

ANGLE IRON

COLD FINISHED (ROLLED) ROUND 5 FT.

Wt. (lbs.) 0.8 1.5 3.3 5.2 7.5 13.3

ITEM 1400027 1400043 1400068 1400084 1400100 1400134

PRICE 4.49 5.49 7.49 11.99 13.99 24.99

COLD FINISHED (ROLLED) FLAT

Wt. (lbs.) 3/4" x 3/4" x 1/8". 2.8 1" x 1" x 3/16"ft. 5.6 1-1/2" x 1-1/2" x 3/16" 8.6 2" x 2" x 3/16" x 5 ft. 11.8 3/4" x 3/4" x 1/8" 5.6 1" x 1" x 3/16" 11.2 1-1/2" x 1-1/2" x 3/16" 17.3 2" x 2" x 3/16" 23.6 Size

10 FT.

Size 1/4" x 5 ft. 3/8" x 5 ft. 1/2" x 5 ft. 5/8" x 5 ft. 3/4" x 5 ft. 1" x 5 ft.

W ITEM

PRICE

1430024 1430040 1430081 1430065 1430032 1430057 1430099 1430073

7.99 11.99 14.99 16.99 10.99 18.99 24.99 29.99

RECTANGULAR HOLLOW TUBE

E L D I N G &

S 2" x 1" x 0.100" 4 FT.

1699 99 1480110 – Wt. 14.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . 26 1480086 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 8 FT.

Size Wt. (lbs.) ITEM PRICE 1/8" x 1" x 5 ft. 2.1 1420009 10.99 3/16" x 1-1/2" x 5 ft. 4.7 1420025 19.99

STEEL SHEETS

SQUARE HOLLOW TUBE

T E E L

COLD FINISHED ROLLED SHEETS

ITEM PRICE

(lbs.)

1-1/4" x 1-1/4" x 1/8" x 4 ft. 1-1/4" x 1-1/4" x 1/8" x 8 ft. 1-1/2" x 1-1/2" x 1/8" x 4 ft. 2" x 2" x 1/8" x 4 ft.

7.0 14.0 8.6 11.7

1480144 1480151 1480029 1480037

15.99 27.99 18.99 23.99

CHANNEL STEEL

• Ideal for trailer frames, railings, racks, bumpers, etc. • Use with expanded mesh to make steps, walkways, ramps, etc. • 5 ft. lengths. Wt. Size ITEM (lbs.)

22 gauge. 24" x 48" sheet. For making boxes, trays, cabinets, and panel construction. 99 1440080 – Wt. 9.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SATIN COATED SHEETS

22 gauge. 24" x 48" sheet. Ideal for body repairs and other rust resistant applications. 99 1440098 – Wt. 10.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

TELESCOPIC SQUARE TUBING

Size (O.D.)

PRICE

1/2"W x 1"H x 1/8"

4.0

1430107

1/2"W x 1-1/2"H x 1/8"

5.3

1430123 12.99

9.99

1"W x 2"H x 1/8"

8.0

1430149 19.99

3" x 1"

20.5

1430164 25.99

3" x 1" x 10 ft.

41.0

1430172 48.99

Wt. (lbs.)

ITEM

1" x 1" x 0.100" 4.6 1480003 1-1/4" x 1-1/4" x 0.100" 5.6 1480169 1-1/2" x 1-1/2" x 0.100" 7.0 1480177 2" x 2" x 0.188" 16.4 1480185 2-1/2" x 2-1/2" x 0.215"* 25.4 1490002 1" x 1" x 0.100" 9.2 1480045 1-1/2" x 1-1/2" x 0.100" 14.0 1480001 2" x 2" x 0.188" 33.7 1480002 *Also fits 2" x 2" trailer hitch coupler

4 FT.

Wt.

8 FT.

Size (O.D.)

PRICE 11.99 15.99 16.99 29.99 44.99 20.99 27.99 55.99

277

W E L D I N G &

S T E E L

EXTRUDED ALUMINUM

• Lightweight, maintenance free aluminum pieces • Ideal to use where corrosion is a problem • Clear satin anodized finish • 6063P series alloy • 8 ft. long

ROUND TUBING Size 3/4" x 1/16" 1" x 3/32" 1-1/4" x 3/32"

Wt. (lbs.) 1.3 2.5 3.2

ITEM 1450055 1450063 1450071

PRICE 15.99 18.99 23.99

CHANNEL Size Wt. (lbs.) ITEM PRICE 3/4"H x 3/4"W x 1/16" 1.3 1450246 15.99 3/4"H x 1"W x 3/32" 2.0 1450089 17.99 3/4"H x 1-1/2"W x 1/8" 4.1 1450097 28.99

FLAT BAR Size 1/2" x 1/8" 3/4" x 1/8" 1" x 1/8" 1-1/2" x 1/8"

Wt. (lbs.) 0.6 0.9 1.2 1.7

ITEM 1450253 1450105 1450113 1450121

PRICE 9.49 12.99 13.99 18.99

SQUARE TUBING Size Wt. (lbs.) ITEM PRICE 3/4" x 3/4" x 1/16" 1.6 1450139 18.99 1" x 1" x 3/32" 3.2 1450147 24.99 1-1/2" x 1-1/2" x 3/32" 4.9 1450154 34.99

WELDING ARGON/CO2 REGULATOR

278

• Designed to control flow of 0-30 CFH (0-15 L/min.) of argon or CO2 • Max. 3,000 PSI 0140224 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ANGLE Size Wt. (lbs.) 3/4" x 3/4" x 1/16" 0.8 3/4" x 3/4" x 3/32" 1.2 1" x 1" x 1/8" 2.1 1-1/2" x 1-1/2" x 1/8" 3.4 2" x 2" x 1/8" 4.5

ITEM 1450287 1450170 1450188 1450196 1450204

PRICE 11.99 14.99 18.99 26.99 34.99

Size: 1/2" dia. 1450220 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . .

1399

ROUND ROD

THREADED ROD

Size 1/4" 5/16" 3/8" 3/8" 7/16" 1/2" 1/2" 5/8" 5/8" 3/4" 1"

Length Wt. (lbs.) 36" 0.4 36" 0.6 36" 0.9 120" 2.9 36" 1.0 36" 1.6 120" 5.3 36" 2.3 120" 8.3 36" 3.7 36" 6.5

ITEM 8001852 8001853 8001855 8001856 8001857 8001858 8001859 8001860 8001861 8001862 8001863

PRICE 0.99 1.19 1.49 3.99 1.99 2.49 6.49 3.99 9.99 5.49 8.99

ARGON/CO2 FLOWMETER KIT

6999

• Flow meter provides more accurate flow information than regulators • Controls flow up to 60 SCFH • Max. pressure: 4,000 PSI • 6 ft. hose with male threaded ends 8009255 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . . .

11999

WELD-PAK™ 100 WIRE FEED WELDER LINCOLN

ELECTRIC

• 110V, 15 amp input, 62 amp @ 20% output; 20 amp input, 88 amp @ 20% output • Ideal welder for farm repairs, workshops, and hobbyists • Welds virtually any light gauge, mild steel material • Complete with 1 lb. spool of 0.035" flux-cored wire, gun and cable assembly, work clamp and cable, welding shield, spare contact tip, and instructional video 99 0110148 – Wt. 51.3 lbs. . . . . . . . . . . . . . . . . . . . . .

519

FLUX-CORE WIRE NOZZLE 0142604 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . WIRE SPOOL ADAPTER

299

10-11 lbs. 0142711 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 799

GAS CONVERSION KIT Comes with everything you need to convert your Weld Pac 100 to weld with gas including: argon regulator, 52" gas hose, fittings, gas solenoid, gun liner for 0.025" to 0.030" wire, two 0.025" contact tips, gas nozzle, and 2 lbs. of 0.025" MIG welding wire 99 0142547 – Wt. 7.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

149

MIG WELDING WIRE MILD STEEL

• CWB cert #: ER49 S-6 • AWS cert #: E-70 S-6 Size x Wt. Wt. (lbs.) 0.023" x 2.0 lbs. 2.1 A 0.030" x 2.0 lbs. 2.1 0.035" x 2.0 lbs. 2.1 0.023" x 11.0 lbs. 11.3 B 0.030" x 11.0 lbs. 11.5 0.035" x 11.0 lbs. 11.2

ITEM 0140193 0140182 0140185 0140194 0140183 0140187

PRICE 7.99 6.99 6.99 32.99 29.99 29.99

FLUX-CORED MILD STEEL

• Gasless • CWB cert #: E491T-GS • AWS cert #: E71T-GS Size x Wt. Wt. (lbs.) 0.030" x 2.0 lbs. 2.1 A 0.035" x 2.0 lbs. 2.2 0.030" x 10.0 lbs. 10.2 B 0.035" x 10.0 lbs. 10.5

E L D I N G &

S T E E L

ALUMINUM (5356)

Size x Wt. C 0.035" x 1.0 lbs.

ITEM PRICE 0140189 21.99 0140191 21.99 0140190 79.99 0140192 69.99

WIRE WELDING CONTACT TIPS Fits most brands of welding guns including Century/Solar, Lincoln, and Deca.

E) 6 PER PACKAGE Wt. 0.1 lbs. 8039865 – Size 0.023" 8039874 – Size 0.030" 99 8039883 – Size 0.035" . . . . . . . . . . . . . . . . . . . . /pkg. F) 10 PER PACKAGE LINCOLN ® Wt. 0.2 lbs.

Wt. (lbs.) ITEM 1.1 0142422

PRICE 9.99

STAINLESS STEEL (308L)

Size x Wt.

Wt. (lbs.) ITEM 2.2 0142430 D 0.035" x 2.0 lbs. 2.2 0142448 D 0.030" x 2.0 lbs.

PRICE 26.99 28.99

ELECTRIC 0142554 – 0.023"-0.025" 0142562 – 0.030" 99 0142570 – 0.035" . . . . . . . . . . . . . . . . . . . . . . . /pkg.

F) 25 PER PACKAGE Wt. 0.3 lbs.

8015300 – Size 0.030" 8012125 – Size 0.035" . . . . . . . . . . . . . . . . . .

1899/pkg.

279

W E L D I N G &

DECA IS A EUROPEAN MANUFACTURER WITH OVER 30 YEARS OF EXPERTISE IN THE WELDING INDUSTRY. ALL DECA WELDERS CARRY A 2 YEAR WARRANTY, WITH A 5 YEAR WARRANTY ON THE TRANSFORMER.

WIRE FEED/GAS WELDERS FEATURES:

• Automatic thermal shutdown protection • Variable wire speed; cold wire trigger • Externally mounted torch and ground clamp output jacks for easier switch from flux core wire to gas welding

A) DECASTAR 135E

• 115 volt, 20 amp, AC input • 85 amps @ 20% duty cycle • 4 heat settings 0110098 – Wt. 46.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

49999

B) DECASTAR 150E

• 115 volt, 20 amp, AC input • 105 amps @ 20% duty cycle • 4 heat settings 0110099 – Wt. 68.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

T E E L

59999

C) DECASTAR 180E

• 230 volt, 16 amp, AC input • 130 amps @ 20% duty cycle • 6 heat settings 8005561 – Wt. 75.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

69999

MIG WELDER D) DECAMIG 100E

• 115 volt, 20 amp, AC input • 70 amps @ 15% duty cycle • Automatic thermal shutdown protection • 4 heat settings, variable wire speed; live wire trigger • Gas operation only 0110100 – Wt. 45.8 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39999

WIRE FEED WELDER E) DECASTAR 100E

• 115 volt, 20 amp, AC input • 70 amps @ 15% duty cycle • Automatic thermal shutdown protection • 2 heat settings, variable wire speed; live wire trigger • Flux wire only 0110097 – Wt. 44.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39999

ARC WELDERS F) PARVA

280 F

• 115 volt, 20 amp, AC input, AC welding current • 70 amp @ 15% max. rating • Uses 1/16" or 5/64" rods • Automatic thermal shutdown protection • Variable heat settings 99 0110094 – Wt. 30.1 lbs. . . . . . . . . . . . . . . . . . . .

159

G) PRIMUS AC/DC

• 230 volt, 50 amp, AC input, AC/DC straight or reverse welding current • AC 230 amp @ 15% duty cycle • DC 140 amps @ 25% duty cycle • Automatic thermal shutdown protection • 16 ft. electrode and ground cables • Variable heat setting 99 0110096 – Wt. 89.8 lbs. . . . . . . . . . . . . . . . . . .

599

INDUSTRIAL WELDING ELECTRODES

WELDING ROD Recommended Usage:

E7014

Ideally suited for all types of mild steel fabrications particularly in horizontal fillet welding of sheet metal and ornamental iron work. E7018

• Ideal for welding high tensile steel bridges, buildings, machines, etc. • Low hydrogen type electrodes E6011

• Ideal for welding thin steel sheets and pipes • Great for poor groove fit, up and vertical downward welding

• All position • Top quality rods manufactured for PRINCESS AUTO • 11 lb. package

E6013

Ideal for welding of machinery, vehicles, light structural steels, surface dressing of heavy steel structures. Low fume.

AWS Designation E6011 E6011 E6013 E6013 E7014 E7014 E7018 E7018

CWB Designation CSA E41011 CSA E41011 CSA E41011 CSA E41011 CSA E48014 CSA E48014 CSA E48018 CSA E48018

Size

Polarity

1/8" x 14" 3/32" x 14" 1/8" x 14" 3/32" x 14" 1/8" x 14" 3/32" x 14" 1/8" x 14" 3/32" x 14"

AC/DC (+/-) AC/DC (+/-) AC/DC (+/-) AC/DC (+/-) AC/DC (-) AC/DC (-) AC/DC (+) AC/DC (+)

Current Range (In amps) 70-110 50-75 80-130 55-95 95-140 70-105 90-140 55-85

ITEM

PRICE

0142802 0140055 0142810 0140056 0142828 0140057 0142836 0140058

16.99 17.99 16.99 17.99 16.99 17.99 16.99 17.99

WELDING ELECTRODES (ALL POSITION) LINCOLN

ELECTRIC

LOW ALLOY and MILD STEEL C.S.A. APPROVED

E L D I N G &

S T E E L

AWS CWB Size Polarity Current Range Wt. ITEM PRICE (In amps) (lbs.) Designation Designation E6011 E41011 3/32" x 12" AC/DC +/50-85 (AC)/40-75 (DC) 9.4 0140045 19.99 E6011 E41011 1/8" x 14" AC/DC +/- 75-120 (AC)/70-110 (DC) 11.4 0140047 19.99 E6013 E41013 3/32" x 12" AC/DC +/75-105 (AC)/70-95 (DC) 9.4 0140048 19.99 E6013 E41011 1/8" x 14" AC/DC +/- 110-150 (AC)/100-135 (DC) 11.2 0140049 19.99 E7014 E8014 3/32" x 12" AC/DC 80-100 (AC)/75-95 (DC) 9.3 0140050 19.99 E7014 E8014 1/8" x 14" AC/DC - 110-160 (AC)/100-145 (DC) 10.3 0140051 19.99 E7018 E48018 3/32" x 12" AC/DC + 70-90 (AC)/65-85 (DC) 9.4 0140052 19.99 E7018 E48018 1/8" x 14" AC/DC+ 110-150 (AC)/100-135 (DC) 11.0 8011661 19.99

WELDING ELECTRODES LINCOLN

TECH TIP

ELECTRIC

Type #6013 #6013

Size 5/64" 1/16"

Wt. (lbs.) ITEM 1.1 8011652 1.1 8011643

PRICE 7.99 9.99

BRONZE BRAZING RODS • Round rods • Low fuming, flux coated bronze for brazing iron based materials

Storage of welding rods is very important. They are susceptible to moisture which will render the rods useless. If rods are being kept over a long period, ensure they are kept in rod storage containers with a desiccant material to remove moisture.

Wt. 0.6 lbs.

0110124 – 3/32" x 18" 0110125 – 1/8" x 18" . . . . . . . . . . . . . . . . . . . . . . . . . .

699

Check out our rod storage system on page 284.

281

W E L D I N G &

VICTOR STYLE HEAVY DUTY WELDING and CUTTING KIT • Kit will cut up to 1-1/2" and weld up to 3/16" • With optional tips kit will cut up to 6" and weld up to 3/4" • Includes cutting attachment, welding handle, oxygen regulator, acetylene regulator, cutting tip, welding tip, tip cleaner, flint lighter, goggles, and 15 ft. oxygen/acetylene hose 99 0110130 – Wt. 18.0 lbs. . . . . . . . . .

319

VICTOR STYLE HEAVY DUTY CUTTING TIPS OXY-ACETYLENE CUTTING TIPS Wt. 0.2 lbs.

PROPANE and NATURAL GAS CUTTING TIPS

Tip Size Cutting Cap. ITEM PRICE Wt. 0.2 lbs. Tip Size Cutting Cap. ITEM PRICE 0-1-101 1/2" 0110113 12.99 1-1-101 3/4" 0110115 12.99 0-GPN 1/2" 0110117 14.99 2-1-101 1-1/2" 0110116 12.99 1-GPN 3/4" 0110118 14.99

VICTOR STYLE MEDIUM DUTY WELDING and CUTTING KIT

T E E L

• Kit will cut up to 1/2" and weld up to 1/4" • With optional tips, kit will cut up to 3" • Includes: torch handle and cutting head, oxygen and acetylene regulators, 3 welding tips, 15 ft. twin hose, goggles, flint lighter, and tip cleaner • Sturdy plastic case holds items in place 99 0110239 – Wt. 15.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

VICTOR STYLE MEDIUM DUTY CUTTING TIPS PROPANE and NATURAL GAS CUTTING TIPS Wt. 0.8 lbs.

Tip size 0-3GPN 1-3GPN

Cutting Cap. 1/2 3/4

ITEM 8020900 8020919

PRICE 14.99 14.99

OXY-ACETYLENE CUTTING TIPS Wt. 0.2 lbs.

Tip size 0-3-101 1-3-101 2-3-101

Cutting Cap. 1/2 3/4 1-1/2

ITEM 8020857 8020866 8020884

PRICE 12.99 12.99 12.99

HARRIS STYLE MEDIUM DUTY WELDING and CUTTING KIT • Kit will cut up to 1" and weld up to 1/4" • With optional tip, this kit will cut up to 3" • Includes: torch handle, oxygen and acetylene regulators, cutting attachment with 6290-1 cutting tip, 3 welding tips #3, #5 and #7, 15 ft. twin hose, goggles, flint lighter, and tip cleaner • Sturdy plastic case holds items in place 99 0110742 – Wt. 16.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

229

HARRIS STYLE CUTTING TIPS PROPANE AND NATURAL GAS CUTTING TIPS Wt. 0.1 lbs.

282

Tip Size Cutting Cap. 6290-1-NX 5/8" to 1" 6290-2-NX 1" to 2"

ITEM 0110122 0110123

PRICE 15.99 15.99

OXY-ACETYLENE CUTTING TIPS Wt. 0.2 lbs.

Tip Size 6290-1 6290-2 6290-3

Cutting Cap. 5/8" to 1" 1" to 2" 2" to 3"

ITEM 0110119 0110120 0110121

PRICE 15.99 15.99 15.99

WELDING ACCESSORIES

A) OXY-ACETYLENE WELDING HOSE REEL

• Capacity: 50 ft., 1/4" hose (not included) • 1/4" NPT inlet/outlet(s) • 300 PSI max. pressure 8000735 – Wt. 44.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

E L D I N G &

24999

B) 1/4" OXY-ACETYLENE WELDING HOSE

• “B” type ends • Fits all standard oxy-acetylene kits • Grade R, max. pressure: 200 PSI 25 ft. LONG 0140213 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ft. LONG 0140212 – Wt. 11.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

2499 4499

C) QUICK CONNECTOR SETS

• 1 set of acetylene quick couplers & nipples • 1 set of oxygen quick couplers & nipples • Threaded end: 9/16" • Use with 0110742, 0110130, and 0110239 CONNECTS HOSE TO REGULATOR 8010261 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . CONNECTS HOSE TO TORCH HEAD 8059940 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

3999 3999

• Prevents flame flashbacks into hose • Max. operating pressures: acetylene: 21 PSI, oxygen: 210 PSI 0140274 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

3299

E) OXY-ACETYLENE WELDING CART

• Holds 2 tanks for oxy-acetylene welding • Tool tray and 8" solid rubber wheels 8001522 – Wt. 37.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

8499

F) MIG WELDING CART

• Holds MIG welder and single gas tank • Top platform measures 18"L x 11-1/2"W • Approx. 26-1/2" high • Hangers for mig gun and ground clamp • Swivel casters on front 2 wheels 8041399 – Wt. 32.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

S T E E L

D) FLASHBACK ARRESTOR SET

11999

G) NOZZLE SPRAY – Anti-spatter nozzle shield

• For MIG welding nozzles, contact tips, electrode holders • Designed to act as a plating agent on sprayed surface • Any residual spatter may be brushed or wiped away • Requires no cleaning prior to painting • 16 oz. 0142497 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G H

599

H) NOZZLE DIP

• Prevents spatter build up on MIG tips • 16 oz. (454g) 0140172 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

DECA WELDER REPLACEMENT PARTS REPLACEMENT WIRE ROLLERS PACKAGE OF 2 GAS NOZZLES 8034192 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT MALE JACK

Fits all Deca welders. 0140237 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

MILD STEEL and FLUX CORE WIRE

• Wire size: 0.023" • Fits Decastar and Decamig models 8001761 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT LINERS FOR MILD STEEL and FLUX CORE WIRE

• Wire size: 0.030" / 0.35" • Fits Decastar and Decamig models 8001770 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

For mild steel welding wire. 0110127 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

MILD STEEL and FLUX CORE WIRE

FOR ALUMINUM WIRE 8029251 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299 2499

499

MILD STEEL, FLUX CORE, and ALUMINUM WIRE

• Wire size: 0.035" / 0.45" • Fits all our Decastar models 8001743 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499 499

283

W E L D I N G &

S T E E L

GAS APPROVED TEFLON TAPE

ACCESSORIES for ARC WELDING D

1/2" x 20 ft. 6050054 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

ACCESSORIES for OXY-ACETYLENE WELDING

B C A) TIP CLEANERS

12 cleaners and a small file. 0141002 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

B) GAUGES Wt. 0.3 lbs. 0110053 – 0 - 30 PSI acetylene gauge 0110054 – 0 - 200 PSI oxygen gauge 0110056 – 0 - 4,000 PSI oxygen gauge . . . . . C) HEAVY DUTY THREAD ON CIRCLE BURNER

G • Tough neoprene rubber cover • Heavy duty extra flexible • Flexible from -50°C to 105°C (-58°F to 221°F) • Great for welders and heavy duty booster cables See page 167 for battery clamps. # Strands Max. Wt. ITEM PRICE Amps (lbs./ft.) (ft.) 4 413 100 0.2 0140301 0.99 2 651 200 0.3 0140319 1.49 1 840 300 0.4 0140327 1.79 1/0 1050 350 0.4 0140062 1.99 2/0 1323 400 0.5 0140063 2.49 D) WELDING CABLE

E) COPPER WELDING CABLE LUG

• For use with oxy-acetylene cutting torches • Cuts circles, straight lines, and bevels • Cuts a 30" max. dia. circle 0140006 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• 1/2" mounting hole • For #2 and #4 welding cable 0140384 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

249

PKG. OF 2 LUGS

Fits #2 and #4 cables. 0140250 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

299

SOLDER ON WELDING LUG

• Use for 1/0 and 2/0 welding cable • 1/2" mounting hole 8009282 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

WELDER PLUGS

F) COPPER WELDING CABLE LUG

H) WALL RECEPTACLE

FITS #1 and #2 CABLE 0140151 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . FITS #1/0 and #2/0 CABLE 0140153 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) 400 AMP SCREW-TYPE ELECTRODE HOLDER 0140681 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . .

349

• No crimping required • 1/2" mounting hole H

• 2-pole 3-wire grounding for surface mounting • 50 amp, 250 volt receptacle 0141200 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1299

449 549

1499

I) MALE PLUG

• Vinyl plastic heavy duty male plug • 50 amp, 250 volt capacity • Pin-type design with 2 blades and half pin 0141218 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

ROD KEEPER STORAGE SYSTEM

CABLE CONNECTORS J K J) EXTENSION CABLE CONNECTORS

• Suitable for sizes of welding cable #4 through #1 • Comes complete with shivs and allen wrench 99 0140202 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

K) WELDING CABLE CONNECTORS

284

Size Wt. (lbs.) #4 Cable 0.2 #2 Cable 0.7 #2/0 Cable 0.7 1/0 or 2/0 Cable 1.0

ITEM 0140013 0140014 0140016 0140267

PRICE 8.49 10.99 11.99 15.99

• Made of high impact polymers • Holds 10 lbs. of 12" or 14" rods • Air tight/watertight seal keeps rods moisture free • Belt clip for easy carrying 0140102 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . .

899/ea.

ROD KEEPER BRACKET Holds up to 3 rod keepers. 8016407 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

1099

WELDERS MULTI-USE TOOL

GROUND CLAMPS

A C • Use to clean spatter from nozzles, remove and install tips, or cut wire • O’all length: 8" 0140011 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

SHEET METAL CLAMP

E D

• Makes bending, forming, and crimping jobs easier • Jaw width: 3-1/8" 99 2911774 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PLUG WELD LOCKING PLIER • Copper alloy knurled swivel pad prevents burn through when plug welding thin sheet metal • U-shape allows even pressure around spot welds • Weld does not stick to copper and allows quick cooling of weld 8003378 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

A) MAGNETIC GROUND CLAMPS 200 AMP 0140228 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 500 AMP 0140798 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699 1499 B) 200 AMP GROUND CLAMP 99 8043529 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 6 C) 300 AMP ALERCO STYLE GROUND CLAMP 99 0140264 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 12 D) 500 AMP GROUND CLAMP 99 0140699 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E) 500 AMP ALERCO STYLE GROUND CLAMP 99 0140265 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 16 WELDING MANUAL

1499

TECH TIP DUTY CYCLE

• Duty cycle is a generic term used in many energy transfer processes • In regards to the welding process, it is the amount of time the welder can be used over a 10 minute period at a given temperature (amperage) setting • Exceeding the duty cycle will shorten the life of your welder Example: 100 amp @ 20% duty cycle means the machine will weld at the 100 amp setting for 2 minutes and then should be shut down to cool for 8 minutes. At this point the welder will have cooled enough to being welding again.

• Covers gas (oxy-acetylene), arc, MIG, and TIG welding, soldering, and flame cutting • Shows techniques related to automotive and workshop repairs • Guides on selecting equipment included 4490001 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

E L D I N G &

S T E E L

1999

WELDING BEANIE

100% cotton. 8057443 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

149

MULTI-USE MAGNETIC HOLDERS Holds metal in various positions for easy welding. F) MULTI-USE MAGNETIC HOLDER

Holds metal at 30°, 45°, 60°, 75° and 90° angles for welding. 99 8003379 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

G) MEDIUM

O’all dim.: 3-1/2" x 3-1/2" x 5/8". 0140913 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

H) LARGE

O’all dim.: 4-1/2" x 4-1/2" x 3/4". 0140921 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

I) X-LARGE

O’all dim.: 5-5/8" x 5-5/8" x 3/4". 0140138 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1699

285

W E L D I N G &

WIRE BRUSHES

HEAVY DUTY WIRE BRUSHES

C B

A) 4 x 16 ROW 9-3/4" LONG WIRE BRUSH 0140715 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

99¢

B) 10" LONG WIRE BRUSH

All metal brush with moulded plastic grip. 0140129 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

• With 2-3/4" scraper • O’all length: 11" 0140098 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

349

D) 4 x 18 ROW WIRE BRUSH

O’all length: 13-3/4".

CHIPPING HAMMERS

STEEL BRISTLES 0140101 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . BRASS BRISTLES 0140099 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

429 499

BRUSH SETS

S T E E L

D C) 5 x 15 ROW BRUSH

E) 9" CHIPPING HAMMER

Forged steel head, shaft, and spring handle. 0140806 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

F) CHIPPING HAMMER

• Fibreglass handle with rubber grip • 5-1/2" head • O’all length: 12" 0140229 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H G) NYLON, BRASS, and STAINLESS STEEL BRISTLES

1-3/8" bristle head with o’all length of 7". 0140483 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

PAINT and METAL MARKERS

199

H) NYLON, BRASS, and STEEL BRISTLES

3-3/8" bristle head with o’all length of 9". 0140491 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

449

BRUSHES

Wt. 0.1 lbs.

Bristles Dia. O’all Lgth ITEM PRICE Brass 3/4" 17" 2940015 1.49/ea. Stainless Steel 3/4" 14" 2940029 1.49/ea.

J K

FLINT LIGHTERS

Temp. range: -45.5°C to 65.6°C (-50°F to 150°F). I) PAINT MARKERS

• Quick drying, opaque paint • Works on metal, wood, glass, plastic, rubber, and cardboard

Wt. 0.1 lbs.

6410016 – White 6410017 – Yellow 6410018 – Red 6410019 – Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

J) QUIK STIK® PAINT MARKERS

• Dries in 5-7 minutes • Works on all surfaces • Twist knob advances stick as needed

L) SINGLE FLINT LIGHTER 99 0140141 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT FLINTS – Pkg. of 5 0140142 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 1.99/pkg. M) TRIPLE FLINT LIGHTER 99 8001746 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT FLINTS – Pkg. of 4 0140140 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 3.29/pkg.

1 2

Wt. 0.1 lbs.

6410033 – White 6410034 – Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599 SOAPSTONE

K) SILVER STREAK® METAL MARKERS

• Easy push button advance • Good resistance to torch flames • No sharpening necessary 0140242 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

286

PKG OF 6 SILVER STREAK® REFILLS 0140243 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

5.99/pkg.

• Ideal for marking metal • Comes with 6 refills 8000038 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

PKG. of 144 REPLACEMENT SOAPSTONES 0140848 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . . 9.99/pkg.

WELDING GLOVES

WELDING GARMENTS

W F

D) GREY COLOURED GLOVES

• With 4" cuff • Genuine cowhide • Heat, cold and dirt protection; puncture and abrasion resistant palm and fingertips 5050050 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

E) GREY/TAN COLOURED GLOVES

A) LEATHER BIB APRON

• 42" long • Split cowhide • Pocket on bib 5040117 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Protects against abrasions, heat, cold, punctures, and dirt • Genuine cowhide 99 5050049 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . F) LARGE GREY COLOURED SHEEPSKIN TIG GLOVES

3499

B) SPLIT/LEG LEATHER APRON

• 36" long • Split cowhide • Kevlar-sewn and riveted • Extra protection against molten metal splatter and extreme heat • Straps provide even weight distribution and speedy release 99 5040101 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Form fitting for when manual dexterity is a must. 5050051 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1399

WELDING GLOVES

C) LEATHER WELDING JACKET

G) BLACK GLOVES

• X-large • Lightweight split cowhide • Brown • Pockets on sleeves 5040096 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) 5 FINGER GOLD GLOVES

Lined 5 finger split cowhide. 5050098 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

7999

5 finger split elkhide with Kevlar stitching. 5050099 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

599

E L D I N G &

S T E E L

1199

WELDING HELMETS & GOGGLES WELDING HELMETS

FLIP FRONT HELMET

Large 4-1/2" x 5-1/4" lens for better viewing of work area. I) WIDE VIEW HELMET

Shade #11 lens. 0140221 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Shade #11 lens • Constructed of a lightweight but durable material with vulcanized fibers • Flip-front lens retainer, positive ratchet head-gear, and waterproof adjustable headband 99 0140083 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499 WELDING HELMET SWEAT J) WIDE VIEW FLIP FRONT WELDING HELMET • Shade #11 lens • Made with lightweight but durable material 0140005 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

BANDS

(2 pack)

K) WIDE VIEW HELMET

• Shade #10 lens • Made of nylon, this super tough helmet is lighter than fibreglass yet almost indestructible • Easy front loading of filter and cover plate 99 0140089 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Suitable for all types of welding helmets • Absorbs sweat and reduces helmet slippage 0140262 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

549

287

W E L D I N G &

S T E E L

AUTO DARKENING WELDING HELMETS

WIDE VIEW FLIP FRONT WELDING HELMET

These helmets are all solar powered with activation sensors above the eyes, and come with industry leading “Swiss Optics”. A) AUTO DARKENING HELMET

• Darkens in 1/12,000 of a second at room temperature • #4 shade when deactivated, darkens to a #10 shade • 3-1/2" x 1-3/8" viewing area • Lightweight, durable flame resistant outer shell • Design channels fumes away from welder 8014775 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22999

B) AUTO DARKENING HELMET

• Darkens in 1/25,000 of a second at room temperature • #4 shade when deactivated, darkens to a #11 shade • 3-1/2" x 1-3/16" viewing area • Rugged lightweight outer shell 0140219 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• 4-1/2" x 5-1/4" shade #10 lens • Durable thermoplastic shell is thinner and lighter than ordinary helmets • Positive locking ratchet suspension type headgear • Terrycloth sweatband for added comfort • Extended throat offers added protection from sparks, slag and fumes 99 0140273 – Wt. 2.0 lbs. . . . . . . . . . . . .

OXY-ACETYLENE WELDING GOGGLES

26999

C) VARIABLE SHADE AUTO DARKENING HELMET

• Darkens in 1/25,000 of a second at room temperature • Infinitely adjustable from shade #9 to #13 • Wide view 3-7/8" x 1-3/8" viewing area • Variable shade lens switch located on outer shell for easy adjustment without removing helmet • Rugged, lightweight shell 99 0140220 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

349

REPLACEMENT EXTERNAL POLY CLEAR LENS - 3 PC

• 4-1/3" x 3-1/2" • For B) and C) 8000631 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.99 REPLACEMENT INTERNAL POLY LENS – 3 PC

• Three 4-1/4" x 2" lenses: DIN 1, DIN 2, and clear • Replacing a clear lens with a DIN 1 lens will convert a shade #10 helmet to a shade #11 helmet 8060000 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.99

LENSES Sold individually.

D) PLATE-TYPE GOGGLE

• Shade #5 lens • Soft vinyl covering provides snug fit • Complete with flip-front lens making it ideal for chippers, grinders, and welders • Vented goggle fits over glasses 99 0140939 – Wt. 0.4 lbs. . . . . . . . . . . . . . . .

E) ROUND TYPE GOGGLES

GOLD LENS

• Shade #5 lens • Goggles have adjustable vented ports • Flip-up front lenses have clear lenses underneath for use as chipping or grinding goggles 99 0140947 – Wt. 0.3 lbs. . . . . . . . . . . . . . . .

Provides a more natural looking view and optimum protection from ultraviolet light.

OXY-ACETYLENE WELDING GOGGLES

Wt. 0.1 lbs.

0140143 – #9 shade 0140144 – #10 shade 0140146 – #11 shade . . 8.49 O’ALL DIM.: 4-1/2" x 5-1/4" Wt. 0.1 lbs.

MAGNIFYING LENS

Wt. 0.1 lbs.

• Fits behind filter plate in 0140020 – #8 shade welding helmets 0140038 – #9 shade • Ideal for welders who use 0140046 – #10 shade . . 4.99 reading glasses or bifocal 8000745 – Clear glass . 1.99 lenses. • O’all dim.: 2" x 4-1/2" O’ALL DIM.: 2" x 4-1/4"

288

0141382 – #9 shade . . . 1.99 0140147 – 1.5 power 0140186 – #10 shade . . 1.99 0140148 – 2.0 power 0140023 – Clear poly . . . 99¢ 0140149 – 2.5 power . . 6.99

• Shade #5 lens • Soft brow and nose guard insures utmost comfort and snug fit • Side vents to increase airflow • Less bulky than standard goggles 8002530 – Wt. 0.1 lbs. . . . . . . . . . . . . . .

999

SOLDERING GUNS & TORCHES

SOLDERING GUNS C A

A) PENCIL SOLDERING IRON with STAND

45 watt. 3410020 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199 199

2 PC SOLDERING TIP SET FOR #3410020 8017077 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . B) PISTOL GRIP SOLDERING IRON

• 35 watt • Includes solder, stand, 2 replacement tips 3412426 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299 2 PC SOLDERING TIP SET FOR #3412426 ¢ 8017086 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 99 • 140/100 watt • Double insulation • Built in light to illuminate work 3410938 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

F E) 9 PC SOLDERING GUN KIT

• 100 watt gun with 1 general purpose and 1 plastic cutting replacement tip • Built in light to illuminate work • Includes: tweezers, heat sink, 3 accessory tools, solder, and a sturdy plastic case 99 3410026 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

32 299

2 PC SOLDERING TIP SET FOR #3410026 8004231 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

C) DUAL HEAT SOLDERING GUN

F) SOLDERING IRON/TORCH KIT

2999

D) SELF-IGNITING SOLDERING IRON/TORCH

• For home soldering jobs, heat shrink tube, electrical and electronics repair, bending glass, plastic, or metal tubing • Refillable, butane gas powered • Temperature controlled by varying gas flow • Ceramic head for prolonged service life • Blow torch heats up to 1,300°C (2,372°F) • Soldering gun up to 400°C (752°F) • Hot blow up to 60 minutes • Includes torch, soldering tip, stand, and coil of solder 0140086 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3299

E L D I N G &

• 30W/135W • Automotive and truck repairs, electrical/electronic circuit repair, repair switch boards, meters, TV cable systems, thawing frozen locks, soldering or welding plastics, loosen rusted nuts and bolts, & plumbing • Self igniting, refillable butane, up to 90 minutes operating time per fill • Adjustable flame controller • Safety lock system • Built in window indicates fuel level • Includes torch, hot blow head, soldering head, four soldering tips, plastic cutting tip, safety cup, and stand 99 8010485 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

S T E E L

POCKET TORCHES

G G) POCKET TORCH

• 1,370°C (2,500°F) jet flame • High impact nylon housing • Auto ignition, refillable butane • Has safety lock, flame adjusting lever, and cap with chain 99 8007051 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) PIEZO START MICRO TORCH

I) MICRO SOLDERING TORCH

• Temperatures up to 1,300°C (2,370°F) • 2 hour burn time per butane fill • Easy, economical, refills with cigarette lighter butane 0141010 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Temp: 400°C (750°F) for soldering tip 1,300°C (2,370°F) for torch • 20 ml fuel capacity • Safety lock, adjustable flame 8007033 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1999

4999

289

W E L D I N G &

SOLDERING ACCESSORIES

REGULAR SOLDERING FLUX

A B A) VACUUM DESOLDERING TOOL 3410022 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

• Use with all lead free solders, plus all other soft solders • Cleans as you solder • Non toxic • 4 oz jar 6440023 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

B) HEAT-RESISTANT SOLDERING TWEEZERS

• Fibre grip • O’all length: 6-1/2" • Cross locking; must press handle to open

FLUX

Wt. 0.1 lbs.

2920065 – STRAIGHT POINT 2920064 – CURVED POINT . . . . . . . . . . . . . . . . .

/ea.

SOLDER

High quality Orange Crush™ paste flux. For use with lead and lead free solder. 8001061– Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

BUTANE GAS

S T E E L

Sorry, cannot be shipped.

C) ROSEN CORE – Contains lead

• 3 oz roll • For electronics, stainless steel, and stained glass 8011910 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Universal fueling tip fits most refillable units • 60 g 6420035 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

599

299 PROPANE TORCHES

D) PURE BOND SOLDER LEAD FREE - 60% TIN, 40% COPPER

and FUEL

For general purpose solder, sweat fitting, sheet metal joints, gutter work, and other jobs 4 OZ.

8011929 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 8 OZ.

8011938 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

459 799

PROPANE TANK TORCHES F

E E) PROPANE TORCH

Complete with 14.1 oz. propane cylinder. 0140582 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

G H G) PRECISION BURNER TORCH

• Use with a standard propane/butane gas cartridge • Ideal for electrical applications • Self-igniting with adjustable flame control • Operates at any angle 99 0140084 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

H) SWIVEL TUBE TORCH

290

1599

BERNZ-O-MATIC PROPANE FUEL

• Black housing with stainless steel tube • 360° swivel angle tube with easy on/off valve • Temp: 1,980°C (3,600°F) for mapp gases 1,370°C (2,500°F) for propane gas 8007060 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2699

Standard 14.1 oz. size. 0140673 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

BERNZ-O-MATIC OXYGEN

1.1 cu. ft. size. 0140665 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1099

MAPP GAS

• Produces much hotter flame than propane • Ideal for brazing and welding • 16 oz. size 0141150 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1099

F) INSTANT LIGHT PROPANE TORCH

• Torch lights instantly with the touch of a finger • Comfortable, easy to hold grip built into torch • Propane bottle included 99 0140166 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

12" BRAZING and SOLDERING RODS

PROPANE TORCHES

Torches do not include hose or POL fitting. Steel head dissipates heat quickly after use. 200,000 BTU TORCH 8009807 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 300,000 BTU TORCH 8009781 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

5999 6499

PROPANE HOSE & FITTING

• 9/16" x 18 LHT • Use to connect torch hose to propane tank 8005552 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

B) 10 FT. HOSE

1/4" x 10 ft. propane hose with female thread swivel ends. 8005534 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Easy to apply, general purpose brazing rod • Recommended for repair of steel, cast iron, copper base metals, galvanized and malleable irons • 60,000 PSI tensile strength with a 871°C (1,600°F) working temperature • Flux coated 99 0141119 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . /pkg.

B) 20 FT. HOSE

1/4" x 20 ft. propane hose with female thread swivel ends.. 8005543 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• Ideal for stainless steel, cast iron, nickel, and brass • Widely used to repair bicycles, metal furniture, railing, and radiators • 85,000 PSI tensile strength with a 816°C (1,500°F) working temperature • Flux coated 99 0141127 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . /pkg. LOW FUMING BRONZE BRAZING RODS – 4 per package

A A) POL FITTING

NICKEL SILVER BRAZING RODS – 2 per package

3499

ALUMINUM SOLDERING RODS – 2 per package

• Ideal for soldering aluminum windows, doors, and miter joints as well as boats, gutters, and siding • Brinnel hardness rating of 100 with a 399°C (750°F) working temperature 99 0141135 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . /pkg.

E L D I N G &

S T E E L

9 PC SOLDERING KIT

SOLDERING AID TOOL

• 100W soldering gun with illuminated tip and spare tip • 30W pencil style soldering iron with stand • Hands free 3x magnifier with adjustable alligator clips, de-solder tool, scraper/probe tool, coil of solder and pot of flux paste 99 8002559 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Designed to hold 2 wires for hands free soldering 8003785 – Wt. 0.5 lbs. . . . . . . . . . .

1499 291

T R A I L E R

& T O W I N G

ADJUSTABLE WIRE STRIPPER

8002927 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

4 WAY CRIMPING TOOL

ADJUSTABLE BALL MOUNT • Class III • 5,000 GTW • Drop 4-1/4” to 10-1/4” • Rise 3” to 9” • Fits 2" receiver tubes, tongue accepts 1" diameter shank balls • Powder coated black 8004513 – Wt. 17.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

8002932 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

AMBER LIGHT

BLUE REPLACEMENT LENS COVER For teardrop rotating beacon lamps. 8004212 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

STROBE WARNING LIGHT

• Polycarbonate lens, sonic welded • O’all dim.: 2-1/2" dia. x 11/16" high 8005233 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Class II • Includes 1" pipe-mount and flange-mount • Choose from dual or quad flash • 80 flashes per minute dual/65 per minute quad • Vibration resistant, reverse polarity, voltage and surge protected • 12 to 48 VDC, 2 amp 99 8005216 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT HALOGEN BULB 55 watt, 12 V replacement halogen H3 bulb. 8005402 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

• For rope sizes from 1/4" to 1/2" • 800 lb. working load • Automatically cinches tight when rope is pulled through • Will not loosen • Aluminum alloy and stainless steel material 99 8003294 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FOG LAMP KITS • H3 Halogen bulb, 12V 55W • Diamond pattern reflector • Includes: wiring harness, LED switch, relay, and heavy gauge wires

A) SMOKE LENS

Lens size: 4-3/8 x 1-7/8". 8003431 – Wt. 1.7 lbs. . . . . . . . . . . . .

3299

B) SUPER WHITE

Lens size: 3-1/2 x 2-1/2". 8003432 – Wt. 2.1 lbs. . . . . . . . . . . . .

C) SMOKE LENS

Lens size: 3-1/8 x 2-1/2" 8003435 – Wt. 2.3 lbs. . . . . . . . . . . . .

4999

D) SMOKE LENS

Lens size: 5-5/8 x 2" 8003438 – Wt. 3.8 lbs. . . . . . . . . . . . .

399

SELF LOCKING CARGO SYSTEM

134

292

299

5999

MECHANICAL IMPLEMENT JACKS

A B B C C

• Zinc chromate finish • Topwind features high capacity sealed thrust bearings • Easy cranking 8 turns per inch • Heavy duty inner screw for greater sideloads

Lift

Retracted Height

Extended Height

Load cap. (lbs.)

Wt. (lbs.)

ITEM

PRICE

10" 10" 15" 10" 15"

12-3/4" 11-1/4" 14-7/8" 11-7/8" 14-7/8"

22-3/4" 21-1/4" 29-7/8" 21-7/8" 29-7/8"

2,000 2,000 2,000 5,000 5,000

12.6 12.3 22.0 14.3 15.6

8004522 8004523 8004524 8004687 8004689

34.99 34.99 49.99 56.99 59.99

HAND WINCHES • All winches zinc plated • Freewheeling position

Load Type Cap. (lbs.) Reel Cap. 600 36 ft. x 1/4" Single speed 800 40 ft. x 3/16" Single speed speed/ 1,200 30 ft. x 5/16" Single reversible 1,400 30 ft. x 5/16" Single speed/ reversible Two speed/ 1,800 58 ft. x 5/16" reversible speed/ 2,500 30 ft. x 7/16" Two reversible

HAND WINCH with STRAP

2,000 LBS. 2-SPEED 8004715 – Wt. 11.8 lbs . . . . . . . . . . . . . . . . . . . . . . . .

5.9

8004700 31.99

7.7

8004702 39.99

9.5

8004703 46.99

9.5

8004705 54.99

& T O W I N G

CLASS III A FRAME TRAILER COUPLER

• 2" x 23 ft. strap with hook • Reversible ratchet. 1,000 LBS. 8004714 – Wt. 7.1 lbs . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. (lbs.) ITEM PRICE 3.7 8004696 26.99 4.2 8004698 28.99

R A I L E R

• 5,000 lbs. GVW • 2" ball size 8004313 – Wt. 6.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999 44 5899 CLASS III TRAILER COUPLER 99

CLASS I TRAILER COUPLER • Zinc plated • 2,000 lbs. GVW • 1-7/8" ball, 2" channel width 8004316 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

• Zinc plated • 6,000 lbs. GVW • 2" ball, 3" channel width • Coupler lock hole for extra security 8004509 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

293

T R A I L E R

TURF TIRE TUBES

13 x 5.00-6 8005297 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 15 x 6.00-6 8005298 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

TOPWIND FOOT JACK

15 FT TOW CHAIN with HOOKS

& T O W I N G

1099 1199

Grade 70 chain with hooks. 5/16" LINKS

• 1,000 lb. trailer jack with foot plate • 10" lift • Fold away handle • Swivels to horizontal position for transport 8004520 – Wt. 13.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

8004683 – Wt. 16.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . 3/8" LINKS

9,400 lb. breaking strength.

4499

13,200 lb. breaking strength. 8004684 – Wt. 21.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

5499

8 x 1.75 SEMI PNEUMATIC WHEEL

4499

CLASS IV A FRAME COUPLER 8005916 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599

SWIVEL MARINE JACK • Class IV • 10,000 GVW • 2-5/16" ball 8004315 – Wt. 9.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

MULTI-USE 6 FT LOADING RAMP

• 1,500 lb. capacity • Bolt-on mount type • Heavy duty yoke • 10" lift • 8" wheel dia. 8004515 – Wt. 19.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

6999

125 PC CABLE TIES

294

• Cap. 2,000 lbs. • Ramp measures 72" x 26" • Textured for better traction • Siderails to prevent walk-off • Includes safety chains 8005827 – Wt. 70.2 lbs. . . . . . . . . . . . . . . . . . . . . .

22999

25 of 4"/18 lb. tensile strength, 25 of 8"/18 lb. tensile strength, 25 of 8"/50 lb. tensile strength, 25 of 11-1/2"/40 lb. tensile strength, 25 of 15-1/2"/50 lb. tensile strength. 8006675 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1599

AXLE ASSEMBLIES

MEASURING AXLES

Underslung

Overslung With our Running Gear Axles, the springs can be mounted over or under the axle, depending on the clearance you desire.

The industry standard for measuring axles is hub face to hub face.

2,000 LB AXLE ASSEMBLIES • Axles come complete with 1 pair of 3-leaf springs, shackles, u-bolts, 4 or 5-bolt hubs with studs • O’all dim.: 1-3/4" O.D. tube • 25-1/4" spring eye to eye • Painted black 5 PK REPLACEMENT LUG NUT

1/2" NC thread. 8009110 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

499

REPLACEMENT WHEEL BEARINGS

For 2,000 lb. axles. 2080008 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . .

1699

Length Spring (Hub Face to Hub Face) Centre 48" (5 bolt) 36" 60" (4 bolt) 48" 60" (5 bolt) 48" 89" (5 bolt) 74"

3,500 LB AXLE ASSEMBLIES

Wt. 0.7 lbs.

2080055 . . . . . . . . . . . . . . .

1999/ea.

PRICE

2080146 2080033 8002423 2080147

234.99 234.99 234.99 239.99

• Complete with one pair of 4-leaf springs, shackles, u-bolt, cast 5-bolt hubs with studs • O’all dimensions: 2-3/8" O.D. tube • 25-1/4" spring eye to eye • Painted black • 72" hub face • 58" spring centres 2080024 – Wt. 85.1 lbs. . . . . . . . • 80" hub face • 62" spring centres 2080148 – Wt. 93.9 lbs. . . . . . . .

ASSEMBLY with ELECTRIC BRAKES

For 3,500 lb. axles.

ITEM

ASSEMBLY with IDLER HUBS

REPLACEMENT WHEEL BEARINGS

Wt. (lbs.) 61.3 63.3 81.3 76.6

O W I N G

26999

ASSEMBLY with ELECTRIC BRAKES

• 5 pk. • For 3,500 lb. axles. Wt. 0.3 lbs. 99 8009110 . . . . . . . . . /pkg.

Same specifications as #2080024 above except equipped with electric brakes. 99 2080023 – Wt. 139.9 lbs. . . . . . .

6,000 LB AXLE ASSEMBLY with ELECTRIC BRAKES

& T

26499

REPLACEMENT LUG NUTS

R A I L E R

469

• 85" hub face • 69" spring centres • 93" in length • Axle comes complete with 1 pair of slipper springs, 6 bolt-on 5-1/2" idler hubs, u-bolt kit, and electric brakes 2080150 – Wt. 210.0 lbs. . . . . . . .

67999

6,000 LB TANDEM HANGER KIT

• Complete hardware for mounting 2 axle assemblies in tandem • Recommended for use with axle 2080150 2080145 – Wt. 14.0 lbs. . . . . . . . . . .

9999

295

T R A I L E R

& T O W I N G

POSI FLEX TRAILER AXLE ENDS • Axle arms flex with built-in rubber cushioning • Independent wheel movement means road shock is not transferred from 1 wheel to the other; making for a smoother, softer ride • No springs required

A) 3,500 LB AXLE ENDS

• Capacity; 3,500 lbs. per pair • 5 bolt hub on 4-1/2" centres • Mounting bracket is 13" wide and fits over a 2-1/2" frame 99 2080017 – Wt. 100.2 lbs. . . . . . . . . . . . . . /pr. * For electric brakes, add item 2080049 on p.297

389

B) 2,000 LB AXLE ENDS

C) 660 LB AXLE ENDS

• Capacity: 2,000 lbs. per pair • 4-bolt threaded hub with studs • Mounting bracket is 12" wide and fits over a 2-1/2" frame 99 2080356 – Wt. 75.5 lbs. . . . . . . . . . . . . . . /pr.

• Capacity: 660 lbs. per pair • 4-bolt threaded hub with studs • Mounting bracket is 5-1/2" wide and fits over a 2" frame 2080349 – Wt. 32.1 lbs. . . . . . . . . . . . . . . . . . . . . .

309

24999/pr.

SPECIAL ORDER AXLE PROGRAM Our custom axle program enables you to build an axle with the required capacity and specifications to suit your needs. Lead time is approximately 4 weeks. AVAILABLE BY SPECIAL ORDER ONLY! Contact your nearest Princess Auto location, or call our National Call Centre in Winnipeg toll free at 1-800-665-8685

ITEM

Beam Only

2,000 lb. Drop 8012624 Axle No Extra Charge $95.00 3,500 lb. Drop 8012633 Axle Available** $145.00 6,000 lb. Drop 8012642 Axle Available** $190.00 7,000 lb. Drop 8012651 Axle Available** $190.00

296

Beam with Idler Hubs 8021936 4 Bolt Hub $185.00 8021963 5 Bolt Hub $280.00 8021990 6 Bolt Hub $360.00 8022025 8 Bolt Hub $485.00

Beam with Idler Hubs Complete* 8021945 4 Bolt Hub $245.00 8021972 5 Bolt Hub $360.00 8022007 6 Bolt Hub $495.00 8022034 8 Bolt Hub $615.00

Electric Brakes Complete* 8021954 4 Bolt Hub $465.00 8021981 5 Bolt Hub $575.00 8022016 6 Bolt Hub $770.00 8022043 8 Bolt Hub $865.00

Hydraulic Brakes Complete* 8002222 4 Bolt Hub $535.00 8002195 5 Bolt Hub $620.00 8002202 6 Bolt Hub $865.00 8002215 8 Bolt Hub $905.00

Tandem One Electric Brakes Complete* 8002226 4 Bolt Hub $720.00 8002199 5 Bolt Hub $950.00 8002206 6 Bolt Hub $1300.00 8002219 8 Bolt Hub $1550.00

* Complete includes springs, u-bolts and hanger kits ** Drop axle is no extra charge for 2,000 lb. For 3,500 add $25.00 per axle, for 6,000 and 7,000 lb. add $45.00 per axle SPECIAL QUOTES AVAILABLE FOR AXLES UP TO 15,000 LB. CAPACITY. (STRAIGHT, DROP, DUALLY AND TORSION)

AXLE COMPONENTS

T R A I L E R

BRAKES 3,500 LB ELECTRIC BRAKE ASSEMBLIES

Type Left side electric Right side electric

Wt. (lbs.) 11.0 11.0

ITEM 2080051 2080052

PRICE 79.99 79.99

MAGNETIC KIT FOR 3,500 LB AXLE ELECTRIC BRAKES

2080053 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3699

6,000 LB ELECTRIC BRAKE ASSEMBLIES

Type Left side electric Right side electric

Wt. (lbs.) 16.0 16.0

ITEM 8012401 8012410

PRICE 94.99 94.99

MAGNETIC KIT FOR 6,000 LB AXLE ELECTRIC BRAKES 8006858 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3699 BRAKE SPRING KIT FOR 3,500 LB AND 6,000 LB AXLES 99 8012508 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

& T

3,500 LB 5-BOLT BRAKE DRUM

4-1/2" bolt circle. 2080049 – Wt. 23.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999

O W I N G

BRAKE SHOE KITS

Axle Type 3,500 lb. 6,000 lb.

Wt. (lbs.) 3.6 4.0

ITEM 8008518 8008799

PRICE 36.99 39.99

Wt. (lbs.) 0.3 0.8 0.8

ITEM 8012465 8012474 8012483

PRICE 1.99 2.99 2.99

BRAKE SPRING PADS

Axle Type 2,000 lb. 3,500 lb. 6,000 lb.

HUBS A

2,000 LB HUBS

Studs A B C

4 5 5*

Bolt Circle Dia. 4" 4-1/2" 4-1/2"

Wt. (lbs.) 5.2 6.3 7.8

ITEM

PRICE

2080041 2080043 8012385

42.99 42.99 49.99

* for wheels over 12" D) 3,500 LB HUB

Studs 5

Bolt Circle Dia. 4-1/2"

Wt. (lbs.) 9.6

ITEM

PRICE

2080047

49.99

E-Z LUBE HIGH SPEED STUB-AXLE ASSEMBLIES • Grease both inner and outer bearing without disassembling hub • Simply attach grease gun to the outside grease nipple and grease both bearings in 1 operation • Special machined channel allows grease to flow to inner bearing To Fit Bolt Pilot Capacity Spindle dia. Wheel Circle Hole in lbs./Hub x Length 4-Hole 4" 2.50" 1,000 1.25" x 8.85" 5-Hole 4.5" 2.50" 1,000 1.25" x 8.85"

Stub Length 4.18" 4.18"

Wt. (lbs.) 8.5 9.2

ITEM

PRICE

2080174 2080166

62.99 64.99

297

T R A I L E R

& T O W I N G

HIGH SPEED STUB-AXLE ASSEMBLIES

BUILD YOUR OWN UTILITY, BOAT, OR SNOWMOBILE TRAILER!

Chev & Ford/Dodge assemblies fit most wheels to date as long as the bolt circle and the pilot hole match. To Fit Wheel Bolt Pilot Capacity* Spindle Dia. Stub Wt. ITEM PRICE Circle Hole lbs./Hub x Length Length (lbs.) 4-Hole 4" 2.50" 1,250 1-1/4" x 9-1/2" 4.65" 7.8 2080000 56.99 5-Hole 4.5" 2.50" 1,250 1-1/4" x 9-1/2" 4.65" 8.6 2080067 62.99 5-Hole Chev 4.75" 2.50" 2,000 1-3/4" x 8-1/4" 4.00" 12.0 2080018 74.99 5-Hole Ford/Dodge 4.5" 2.50" 2,000 1-3/4" x 8-1/4" 4.00" 12.1 2080026 74.99 * Capacity in lbs. per individual hub.

LOW SPEED IMPLEMENT STUB-AXLE ASSEMBLIES • Use on implements, wagons and trailers • Not intended for highway use! To Fit Wheel Bolt Pilot Capacity* Circle Hole lbs./Hub 4-Hole 5" 3.62" 1,250 6-Hole 6" 4.62" 3,600 6-Hole 6" 4.62" 6,000 * Capacity in lbs. per individual hub.

Spindle Dia. x Length 1-5/8" x 10" 1-3/4" x 14" 2-1/2" x 14"

Stub Length 6.50" 9.75" 7.80"

Wt. (lbs.) 10.3 20.1 30.8

ITEM

PRICE

2080083 2080075 2080059

64.99 78.99 112.99

ITEM

PRICE /SET

WHEEL BEARING SETS Includes 2 bearings with races, 1 grease seal, and cotter pin. Spindle Outer Wt. O.D. Hub I.D. (lbs.)

1" 1-1/16" 1-3/8" x 1-1/16" 1-3/8" x 1-1/16" *Inner cup O.D. 2.361

1.980" 1.980" 1.980"* 1.980"**

0.6 0.6 0.7 0.7

2080008 16.99 2080009 16.99 2080013 16.99 2080014 19.99 Inner cup O.D. 2.328"

GREASE KEEPER

• Snug fitting steel dust cap has grease zerk and pressure relief built-in • Cover included • Outer hub I.D.: 1.980" • Not recommended for use on motor vehicles 99 2080004 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6,000 LB WHEEL BEARING SET Replacement bearings, seals and dust cap for 6,000 lb. axles. 8008823 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2699

TAPERED ROLLER BEARINGS • Set consists of bearing and cup • Replacement for most trailer wheel bearings

298

Bearing Cone # LM11949 L44643 L44649 LM67048

Cup # LM11910 L44610 L44610 LM67010

I.D. 0.750" 1.000" 1.0625" 1.250"

O.D. 1.781" 1.980" 1.980" 2.328"

Width 0.610" 0.560" 0.560" 0.560"

Wt. (lbs.) 0.3 0.3 0.3 0.4

ITEM 3870075 3870076 3870077 3870079

PRICE 4.99/set 5.49/set 5.79/set 5.99/set

WHEEL NUTS and BOLTS A) 5 PK WHEEL NUTS

1/2" x 60. 8009110 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

B) 5 PK WHEEL STUDS

1/2" x 1-13/16 replacement wheel stud. 8009128 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299

C) WHEEL BOLTS 1/2" WHEEL BOLT

9/16" WHEEL BOLT

Fits axle hub #2080059. 2081180 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

119/ea.

D) NUT AND WASHER SET

Fits all our axle hubs except #2080059. 2081198 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

119/ea.

For 2,000 lb and 3,500 lb axles. 8012358 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

DRIVE PLATES • Designed to be welded to “W” series weld-on-hubs • Select the hub with the desired bore • Weld it to the drive plate with the required bolt pattern to build a drive hub Wt. 2.0 lbs. 2080307 – 4-BOLT 2080315 – 5-BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

& T

1299

AXLE GREASE SEAL KITS Axle Type 2,000 lb. 3,500 lb. 6,000 lb. & 7,000 lb.

Wt. (lbs.) 0.1 0.2 0.3

ITEM 2080137 8012367 8012376

PRICE 6.99 6.99 8.99

O W I N G

REPLACEMENT DUST CAPS For stub axle-hub assemblies. Fits Axle-Hub 2080000, 2080067 2080018, 2080026,2080083 2080042, 2080075 2080059

Wt. (lbs.) 0.1 0.1 0.1 0.2

ITEM 8043280 8043299 8043306 8043315

GREASE and DUST CAP TOOL

R A I L E R

PRICE 0.99 0.99 1.39 1.49

SHACKLE KITS For axles up to 3,500 lb. capacity. SINGLE

Two 3" straps with bolts and nuts. 8008849 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . • Tapered jaws of tool fit behind the crimped edge of dust cap • Handle is designed for prying hub cap loose 99 2990281 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

TANDEM

Four 2" straps with bolts and nuts 8008872 – Wt. 2.0 lbs. . . . . . . . . . . . . . .

1299

LEAF SPRINGS G

E F

Centre Spring Wt. ITEM PRICE Colour eye to eye width (lbs.) (ea.) Code 25-1/4" 1-3/4" Green 9.9 2080096 34.99 23-1/4" 1-3/4" Brown 11.1 2080031 33.99 29" 1-3/4" White 11.9 2080080 36.99 25-1/4" 1-3/4" Red 11.6 2080032 33.99 24" 1-3/4" Yellow 5.6 2080064 25.99 24" 1-3/4" Blue 9.1 2080065 35.99 29" 1-3/4" Grey 15.2 2080066 35.99 4 PK REPLACEMENT BUSHINGS – For spring end. – 8009078 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 599/pkg. E E F F G G H

No. of leaves 3 3 4 4 2 4 4

Capacity used in pairs 2,500 lbs. 2,600 lbs. 1,000 lbs. 3,500 lbs. 1,000 lbs. 2,000 lbs. 3,500 lbs.

299

U-BOLT MOUNTING KITS

A) FITS 1-3/4" DIA ROUND TUBING

Rated up to 2,000 lbs. 2080028 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . .

R A I L E R

B) FITS 2-3/8" DIA ROUND TUBING

Rated up to 3,500 lbs. 2080027 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . . . . C

1599/pr. 1799/pr.

C) FITS 2" x 2" SQUARE TUBING

Rated up to 3,500 lbs. 2080076 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . . . .

1999/pr.

D) FITS 3" DIA. ROUND TUBING

Rated up to 6,000 lbs. 8012330 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . . . .

2199/pr.

U-BOLT REPAIR KIT FOR #2080017 2081636 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

10.99

MOUNTING KITS E) TANDEM AXLE MOUNTING KIT

& T

• Complete hardware for mounting 2 running gear assemblies in tandem • Rated up to 3,500 lbs. • For use with double-eye springs up to 1-3/4" width 2080029 – Wt. 21.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5499/pr.

F) TANDEM AXLE YOKE

Rated up to 7,000 lbs. 8006862 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O W I N G

1199/ea.

G) SUSPENSION MOUNTING KIT

• For mounting 2 slipper springs • Rated up to 3,500 lbs. 2080068 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499/pr.

H) SUSPENSION MOUNTING KIT

G H

• For mounting 2 eye to eye springs • Rated up to 3,500 lbs. 2080025 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499/pr.

HEAVY DUTY TRUCK MUD FLAPS Includes 2 reflectors. A) Use with single wheel pickups and trailers. B) Use with dual-wheel vehicles and trailers. Size Wt. (lbs.) A 18"H x 12"W 7.4 B 18"H x 18"W 11.6 B 15"H x 20"W 11.4

ITEM 8001822 8001833 8001834

PRICE 15.99 17.99 16.99

SINGLE PLASTIC FENDER with SKIRT • 6.75 x 20.5 • For wheels up to 12" 2080097 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1799

STEEL FENDERS

I) SINGLE

300

I J J K L

Type Single Single 90° Back Single Tandem

J) SINGLE Size 7.5" x 23.5" 9.0" x 31.0" 9.0" x 32.0" 9.0" x 32.0" 9" x 72" x 20.5"

K) SINGLE Wheel Size up to 12" up to 15" up to 15" up to 15" up to 15"

L) TANDEM Wt. (lbs.) 5.6 7.2 7.7 12.0 17.3

ITEM 2080216 2080224 2080021 2080078 2080095

PRICE 18.99/ea. 23.99/ea. 24.99/ea. 26.99/ea. 44.99/ea.

RUBBER BOAT TRAILER ACCESSORIES

A B B C C C D D E F G G G H H

Description

Shaft

Size

Keel roller Keel roller Keel roller Spool roller Spool roller Spool roller Guide-on roller Guide-on roller Ribbed rocker roller Bow roller End caps End caps End caps Bow stop Bow stop

5/8" 5/8" 5/8" 1/2" 5/8" 1/2" 5/8" 1/2" 7/8" 1/2" 1/2" 5/8" 1/2" 3/8" 1/2"

5" 8" 12" 4" 5" 5" 2-1/2" x 12" 2" x 9"

Wt. (lbs.) 1.5 2.1 3.3 0.7 0.9 0.9 2.3 1.1

ITEM

4200068 9.99 4202099 13.99 4202081 16.99 4202115 6.99 4202107 6.99 4200071 7.99 4202149 12.99 4202156 7.99

4-1/4" x 3" 3" 3" 2-1/2" 3" 4" 6"

1.4 0.5 0.5 0.3 0.5 0.3 1.5

4202131 12.99 4202180 5.99 4202172 2.99 4202164 2.99 4200072 3.49 4200069 5.99 4202198 10.49

R A I L E R

PRICE D

& T

UTILITY RUBBER BUMPER 6"L x 2-1/8"W x 1-7/8"H 3893211 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O W I N G

699/ea.

LED TRAILER BREAKAWAY KIT LED indicators provide instant battery status

• Activates trailer brakes in the event of separation • LED display indicates if battery is charging or needs to be charged • Easy accessible battery • Rustproof, plastic box protects battery and charger • Lockable lid • For use on single and tandem axle trailers with electric brakes 8002177 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7999

BRAKE CONTROLLERS I) DASH CONTROLLER

• For use with electric brakes • Activated by tow vehicles electrical system • Compatible with anti-lock braking systems • 2 or 4 brake systems 2081248 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

11999

J) DIGITAL BRAKE CONTROLLER

• For 2, 4, and 6 brake systems • Digital display indicates percent of power output to trailer, short circuit conditions, and trailer connection • Short proof protected • Operates at any angle and upside down • Quick disconnect allows for easy removal 99 8023532 - Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

139

B) LED BRAKE CONTROLLER

• For 2, 4 and 6 brake systems • LED display indicates power to control, power level from green to bright yellow • Operates at any angle and upside down • Short proof protected • Quick disconnect 8023523 - Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

9999

TECH TIPS • Trailer size is restricted to the following maximums: Width: 26 m (8 ft. 6 in.), Height: 4.15 m (13 ft. 6 in.), Length: 12.5 m (41 ft.) except where farm implements are concerned • Brakes are required for trailers having a GVW of more than 2,000 lbs. • All trailers must have either splash guards or fenders when travelling on the highway • Do not overload a trailer. Keep the load 200 lbs. below the rated capacity.

301

T R A I L E R

& T O W I N G

WEST COAST MIRRORS • Stainless bodies and end caps. • Lighted model has acrylic lens with two 67 bulbs • Heated model contains 40 watt. heat pad A) HEATED WEST COAST MIRROR with LIGHT

• Stainless steel body • 6" x 16" • Mirror is heated and backlit 8024844 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

B) WEST COAST MIRROR

• Aluminum body • 6" x 16" 8024746 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

CONVEX MIRRORS

FOR YOUR INFORMATION... We update over 160,000 names on the mailing list every year.

• Stainless steel body • “L” bracket included 8.5" DIA.

To ensure you recieve our flyers and catalogues without interruption, update your name to our list every 9 months.

1399 99 8024728 – Wt. 0.8 lbs. . . . . . . . . . . . . . 9 8024737 – Wt. 1.3 lbs. . . . . . . . . . .

6" DIA.

TIRES & TIRE TOOLS HIGH SPEED TRAILER TIRES and ASSEMBLIES

Ply 2 4 6 8 10

C) 4.80 x 4.00 x 8

• Load range: B • Capacity: 590 lbs.

TIRE ON 4-HOLE WHEEL 2026755 – Wt. 9.7 lbs. . . . TIRE ON 5-HOLE WHEEL 2026888 – Wt. 9.0 lbs. . . . TIRE ONLY 2020576 – Wt. 5.5 lbs. . . .

4499 4499 2499

C) 5.70 x 8

• Load range: B • Capacity: 715 lbs. TIRE ON 4-HOLE WHEEL 2026763 – Wt. 12.0 lbs. . . TIRE ON 5-HOLE WHEEL 2026896 – Wt. 13.5 lbs. . . TIRE ONLY 2020584 – Wt. 7.6 lbs. . . .

5899 5899 4499

D) 5.30 x 12

• Load range: B • Capacity: 840 lbs.

E) 16.5 x 6.5 x 8

Load Range = = = = =

A B C D E

• Load range: B • Capacity: 620 lbs. TIRE ON 4-HOLE WHEEL 2026987 – Wt. 14.4 lbs. . . . TIRE ON 5-HOLE WHEEL 2020998 – Wt. 14.5 lbs. . . . TIRE ONLY 2020592 – Wt. 11.3 lbs. . . . .

6299 4299 4299

F) 18.5 x 8.50.8

• Load range: B • Capacity: 770 lbs. TIRE ON 4-HOLE WHEEL 2021764 – Wt. 20.1 lbs. . . . TIRE ON 5-HOLE WHEEL 2021772 – Wt. 20.0 lbs. . . .

7999 7999

F) 20.5 x 8.00-10

TIRE ON 4-HOLE WHEEL 2026771 – Wt. 20.4 lbs. . . TIRE ON 5-HOLE WHEEL 2020964 – Wt. 20.5 lbs. . . TIRE ONLY 2026805 – Wt. 9.3 lbs. . . .

7999 7999 4999

• Load range: C • Capacity: 1,105 lbs. TIRE ON 4-HOLE WHEEL 2021780 – Wt. 26.0 lbs. . . . . TIRE ON 5-HOLE WHEEL 2021798 – Wt. 28.6 lbs. . . .

9299 9299

TRAILER RIMS Rim Size G

302

G G G H I I

13 x 4.5 13 x 4.5 14 x 5.5 15 x 6.0 8 x 3.75 12 x 4

Hub Size 4-hole 5-hole 5-hole 5-hole 4-hole 4-hole

Bolt Circle 4.00 4.50 4.50 4.50 4.00 4.00

Colour Capacity Wt. (lbs.) White 1,100 lbs. 13.2 White 1,360 lbs. 13.0 White 1,870 lbs. 18.1 Black 2,150 lbs. 23.3 White 590 lbs. 3.7 White 1045 lbs. 10.1

ITEM

PRICE

2020018 2020019 2020083 2020709 2023232 2026912

47.99 42.99 49.99 56.99 12.99 28.99

RADIAL TRAILER TIRE ASSEMBLIES

• High performance radials designed for towing • White spoked rims A) ST 175/80 R13

• Load range: C • Max. load of 1,360 lbs. @ 50 PSI • Tire mounted on a 13" 4-hole rim 2020016 – Wt. 34.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tire mounted on a 13" 5-hole rim. 2020017 – Wt. 30.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15699/ea. 15699/ea.

B) ST 205/75 R14

• Load range: C • Recommended for use with 3,500 lb. axles • Max. load of 1,760 lbs. @ 50 PSI • Tire mounted on a 14" 5-hole rim 2020081 – Wt. 40.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18999/ea.

C) ST 145/R12

• Low profile • Load range: D • Max. load of 1,220 lbs. @ 65 PSI • Tire mounted on a 12 x 4.5 x 5 bolt supreme mod wheel 2020143 – Wt. 25.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ATV 2-PLY TUBELESS TIRES

Tire Size Wt. (lbs.) ITEM 22 x 11.00-8 14.2 2025195 25 x 12.00-9 18.4 2025914 25 x 12.00-9 20.7 2027027 22 x 8.00-10 10.0 2020287 22 x 11.00-8 21.6 2026227 24 x 9.00- 11 18.5 8023195 * NOT A CARLISLE PRODUCT D D E* F G H

& T

/ea.

R A I L E R

O W I N G

PRICE 79.99 89.99 99.99 64.99 82.99 89.99

ATV TIRE RIMS Size 8x7 8x7

Bolts 4-hole 5-hole

Wt. (lbs.) 5.0 6.2

ITEM 2020101 2024925

PRICE 19.99 19.99

ATV TIRE TUBES Size 18 x 9.50-8 25 x 12.00-9

Wt. (lbs.) 2.1 2.6

ITEM 2026169 2027043

PRICE 18.99 19.99

WHEEL BARROW WHEEL 2-PLY 4.80/4.00 x 8 TUBE TYPE TIRE

• 35 PSI; load rating: 300 lbs. • Mounted on an all-metal pressed steel wheel • Roller bearings with 3/4" bore 2020062 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TIRE ONLY 2024685 – Wt. 2.1 lbs.

2999/ea. 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 /ea.

IMPLEMENT TIRE ASSEMBLY 11-L15 TIRE AND TUBE ON 6-HOLE WHEEL

Wt. rating: 2,930 lbs. 2026144 – Wt. 52.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15999

303

T R A I L E R

& T O W I N G

SMALL TIRE and WHEEL ASSEMBLIES • Ball bearings • Ideal for shop carts, dollies, etc. • FOR LOW SPEED APPLICATIONS ONLY

A A A A B

Tire Size

Ply

2.80/2.50-4 4.10/3.50-4 4.10/3.50-5 5.30/4.50-6 4.10/3.50-4

2 4 4 – 2

Rim # of Pcs 2 1 (plastic) 2 1 2

Style

O’all. Ht. 9" 10-1/2" 11" 14" 10"

Tube Type Tube Type Tube Type Tubeless Tube Type

Bore

Load Rating 220 lbs. 300 lbs. 330 lbs. 560 lbs. 300 lbs.

5/8" 5/8" 3/4" 3/4" 5/8"

Wt. (lbs.) 3.5 2.7 5.0 7.8 3.5

B ITEM 2020059 2020107 2020061 2027134 2020060

PRICE (ea.) 22.99 22.99 29.99 42.99 24.99

SPEED WHEELS C) LIGHT DUTY

Size 6" x 1-1/2" 7" x 1-1/2" 8" x 2" 10" x 2-1/2" 13" x 2-1/2"

Load Cap. 60 lbs. 60 lbs. 100 lbs. 140 lbs. 240 lbs.

Bore Wt. (lbs.) 1/2" 1.8 1/2" 3.0 1/2" 4.3 1/2" 8.8 5/8" 10.5

ITEM

PRICE

2026201 6.99 2021368 8.99 2020295 9.99 2020088 13.99 2020090 19.99

D) MEDIUM DUTY

E) HEAVY DUTY – Poly flex hub.

Size

Load Bore Wt. ITEM PRICE Cap. (lbs.) 8" x 2-1/2" 175 lbs. 5/8" 4.6 2026938 17.99 10" x 2-3/4" 200 lbs. 5/8" 6.0 2026946 19.99

Load Bore Wt. ITEM PRICE Cap. (lbs.) 8" x 2-1/2" 250 lbs. 3/4" 4.3 2020091 12.99 10" x 2-3/4" 300 lbs. 3/4" 8.6 2020092 15.99

TURF TIRE ASSEMBLIES Tire mounted on wheel with 3/4" bore. Size

Ply Rating 13/5.00 x 6 Tube Type 4 15/6.00 x 6 – 2 18/8.50 x 8 – 2 * NOT A CARLISLE PRODUCT

Load Rating 370 lbs. 345 lbs. 515 lbs.

TURF and GARDEN TIRES Tubeless (except 2021541 - tube type).

PSI 40 14 10

Wt. ITEM PRICE (lbs.) (ea.) 6.5 2021806 * 32.99 9.1 2021814 39.99 17.0 2021822 69.99

NOT FOR HIGHWAY USE

Size

Load PSI Wt. ITEM PRICE Ply (lbs.) Rating Rating F 13 x 5.00-6 4 370 lbs. 40 3.3 2021541 22.99 F 16 x 6.50-8 2 440 lbs. 14 5.1 2021558 32.99 G 18 x 8.50-8 4 815 lbs. 22 11.8 2021590 49.99

SMALL TIRE TUBES

304

Size 2.80/2.50 x 4 4.10/3.50 x 4 4.00 x 6 5.30/4.50 x 6 4.00 x 8 5.70 x 8

Wt. (lbs.) 0.3 0.5 0.6 0.8 0.9 1.2

FLANGE BEARINGS

ITEM 2026862 2024263 2024255 2020004 2024248 2024230

PRICE 5.99 7.99 7.99 8.99 9.99 11.99

• 2 per package • Can be used as replacement bearings for many of our small tire assemblies • Easy to install and remove Bore 3/8" 1/2" 5/8" 3/4" 1"

O.D. 1-1/8" 1-3/8" 1-3/8" 1-3/8" 2"

Wt. (lbs.) 0.1 0.1 0.2 0.2 0.5

ITEM 3870095 3870096 3870092 3870093 3870094

PRICE 2.99/pk. 3.99/pk. 3.99/pk. 3.99/pk. 4.99/pk.

TIRE GAUGES

A B

A) TRACTOR TIRE GAUGE

A) RADIAL and CONVENTIONAL PASSENGER TIRE GAUGE

2 sides: 5 to 50 PSI in 1 lb. increments and 40 to 350 kPa in 10 kPa increments. 4270542 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

2 sides: 20 to 120 PSI in 2 lb. increments and 120 to 820 kPa in 20 kPa increments. 4252243 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

899

C) REGULAR EXTENSION SERVICE GAUGE

899

• Dual head chuck • 2 sides: 10 to 160 lbs. in 2 lb. units and 80 to 1,100 kPa in 20 kPa units • Red marker 4272381 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

TIRE GAUGES • 0 to 100 PSI • 0 to 7.5 kg/cm2 4270111 – Wt. 0.2 lbs. . . . . . . . . .

2599

999

• 0 to 100 PSI • 2" dia. gauge • Holds reading until released • Plastic storage case 4270052 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . .

1799

LUG WRENCHES F) FOLD-DOWN LUG WRENCH

• Sizes: 11/16", 3/4", 13/16", and 7/8" • Heavy duty, corrosion resistant • Folds down to save space 4272282 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499

G) 20" LUG WRENCH

• Sizes: 11/16", 3/4", 13/16", and 7/8" • Rugged forged steel for service, shop, or auto 4272514 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G

R A I L E R

& T

599

E) ONE TOUCH TIRE GAUGE

• 0 to 60 PSI • Rubber body gauge • Measures/reduces tire pressure 4272258 – Wt. 0.1 lbs. . . . . . . . . . . .

1299

DIAL TIRE PRESSURE GAUGE

D) TIRE GAUGE

B) DUAL CHUCK TRUCK TIRE GAUGE

A) TIRE GAUGE

• For bicycles, RVs, and trucks • 2 sides: 20 to 120 PSI in 2 lb. increments and 120 to 820 kPa in 20 kPa increments 4252235 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• For use on air/water filled tires • 2 sides: 5 to 50 lbs. in 1 lb. increments and 40 to 350 kPa in 19 kPa increments 4271995 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

O W I N G

1099

G) TRUCK LUG WRENCH

• Sizes: 7/8", 15/16", 1", and 1-1/16" • Length: 25" 4272589 – Wt. 6.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1699

H) 1/2" RATCHETING LUG WRENCH

• Chrome Moly steel gear and driver • Carbon steel frame and tubing handle • 60 teeth gear construction • Bi-directional use • Torque multiplier with ratio of 1:35 8006073 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

3699

TIRE CHANGERS I) TIRE CHANGER

• Mounts and de-mounts a full range of tires from 8" to 16" light truck • Will handle up to 12.5" x 16" flotation tires • O’all dim.: 38" x 15" x 18" 2050002 – Wt. 35.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8999

J) TIRE SPREADER

• Spread tire bead for easy repair • Use with 8" to 16" tires 2050004 – Wt. 5.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K

1999

K) WHEEL BALANCER

• Balances wheels quickly and easily • Machined aluminum head fits hubs up to 1-1/2" dia. • Rust resistant enamel finish on base • O’all dim.: 28-5/16" x 15-3/4" x 7-5/8" 2050006 – Wt. 13.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13999

305

T R A I L E R

& T O W I N G

TIRE TOOLS

A) 4-IN-1 TOOL

• Repairs cap and core threads • Has “Easy-Out” feature for removing damaged cores and screwdriver for removing standard cores 99 4270168 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B) VALVE FISHING TOOL

• Handle has valve core driver and deflating pin • Designed for working valve through rim hole 2020125 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

D) TIRE TREAD DEPTH GAUGE

• Large base, flat blade, pocket clip • Accurate and convenient way to measure the depth of treads • Round aluminum indicator bar calibrated from 0" to 1" in 1/32" increments 99 2025716 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) VALVE INSERTION TOOL

E) TIRE VALVE CORE TOOL

For removing and inserting all sizes of snap-in type tubeless tire valves. 99 2020126 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• Install and remove standard valve cores • 5" long 2020029 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

499/pr.

TIRE VALVES and CORES F

F) TUBELESS TIRE VALVES

G) VALVE CORES

• “Snap-In” construction for easy installation • Finest quality • Greater safety • Ozone resistant rubber

Positive seal, fast inflation, guaranteed air-tight. 2025633 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Trade #

Rim Effective Wt. hole dia. length (lbs.) TR 413 0.45" 1-1/4" 0.1 TR 415 5/8" 1-1/4" 0.1 TR 418 0.45" 2" 0.1

ITEM PRICE 2020095 4.99/pr. 2020096 4.99/pr. 2020098 4.99/pr.

299/five H) HEX HEAD CHROME PLATED VALVE CAP ¢ 2020128 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 99 /five I) SCREWDRIVER TYPE VALVE CAP

Nickel plated. 2020127 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99¢/five J) PLASTIC VALVE CAP ¢ 2020130 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 69 /five

TUBELESS SNAP IN VALVES

For use up to 65 PSI working pressure. Trade # Qty. Rim Effective Wt. ITEM PRICE hole dia. length (lbs.) TR 414L 4 pk. 0.45" 1-13/16" 0.1 8006220 3.79 TR 418 4 pk. 0.45" 2" 0.1 8006224 3.99 TR 415 4 pk. 5/8" 1-1/4" 0.1 8006233 3.99 TR 413 4 pk. 0.45" 1-1/4" 0.1 8006235 3.99 TR 414 4 pk. 0.45" 1-1/2" 0.1 8006236 4.49 TR 418 4 pk. 0.45" 2" 0.1 8006238 4.99

TIRE VALVE EXTENSIONS

Length

Type

0.8" 1.5" 1.1" 1.8"

Metal Metal Plastic Plastic

Wt. (lbs.) 0.1 0.1 0.1 0.1

ITEM

PRICE

8006246 8006247 8006252 8006254

3.99 5.99 3.49 4.99

K) 5 PK. STANDARD VALVE CORE REPLACEMENTS

• Working pressure: 0-212 PSI • Working temp.: -40°C to +100°C 8006243 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

269

L) 5 PK. TEMPERATURE RESISTANT VALVE CORE REPLACEMENTS

306

• Working pressure: 0-212 PSI • Working temp.: -54°C to +150°C 8006244 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

TIRE VALVE EXTENSION with HOLDER

299

Extends valve 5-1/8" through dual wheel set up for easy pressure regulation on inner wheel. 99 8006259 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

TIRE REPAIR KITS A

A) RADIAL TIRE REPAIR KIT

With split eye tool, rasp tool, hand knife, 5 pc. soft strings, 3 pc. hard strings, and tube of cement. 99 2020626 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R A I L E R

B) TUBELESS TIRE REPAIR CORD KIT

• Twelve 6" repair cords • 6-1/4" needle 2020253 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . THIRTY 6" REPAIR CORDS 2020035 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) TUBELESS TIRE STRIP PATCH KIT

499 7.99

• Ten 1/4" x 2-1/4" strip patches • Open eye needle • 12 ml. tube rubber cement 2020261 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PATCH KITS

STRIP PATCHES

E D

• 1/4" x 2-1/4" • 12 g tube of rubber cement • 50 per pkg. 2020036 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

699/pkg.

4-WAY TIRE VALVE TOOL

D) 24 PC PATCHES

• Size: 2" x 1-1/4" • Tube of rubber cement 2021418 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399 E) 30 PATCHES – 2" dia. 99 2021384 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 7 E) 20 PATCHES – 3" dia. 99 2021392 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

• For valve stem and core • Rethreads inside and outside of valve stem • Insert, tighten, or remove valve core • “Easy-Out” to remove core if shoulders break off • All steel, plated to resist corrosion 99 4272001 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

WHEEL CHOCKS

TIRE STITCHERS

Use to roll out air bubbles from tire patches. 8006257 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

JACKS

599

& T O W I N G

• Heavy duty welded steel • Teeth on bottom edge for better grip • Highly visible yellow colour • Add security when changing a tire or parking on uneven terrain 6" x 6-1/2" 2020171 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . . . 8" x 8-1/2" 8018646 – Wt. 17.2 lbs. . . . . . . . . . . . . . . . . . . .

1999/pair 3499/pair

F) 500 LB PNEUMATIC SWING BACK JACK

JACKS

• 10" pneumatic tire • 17" retracted length • 10" lift 8007019 – Wt. 24.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G F

6299

G) 550 LB SWING BACK TYPE

• Swivels to a horizontal position for transport • 11" lift • Fits a tongue up to 3-1/2" x 5" • 5-1/2" caster swivels 360° 1070093 – Wt. 14.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

H) 1,200 LB DUAL WHEEL SWIVEL JACK

• 6" dual casters • Retracted length: 26" • Extended length: 39" • Mounting plate: 5-1/2" x 6-1/2" 1070022 – Wt. 22.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

307

500 LB PNEUMATIC TRAILER JACK

1,000 LB TRAILER JACK

R A I L E R

• Ratcheting mechanism allows for easy movement of trailer • Jack swivels to assist in steering trailer while moving manually • Mounts to side of trailer tongue • Designed for semi-permanent attachments • Equipped with quick removal feature • Height: retracted: 28"; extended: 38" • Lift: 10" • 10" dia. pneumatic tire 99 8025549 – Wt. 25.5 lbs. . . . . . . . .

• Mounts to side of trailer tongue • Designed for semi-permanent or permanent attachments • Heavy duty worm gear drive with built-in gear box • 24" lift • Wheel: 5-5/8" dia. x 1-3/4"w 99 1070020 – Wt. 16.2 lbs. . . . . .

JACKS A) 1,000 LB MARINE SWIVEL JACK

• Bolt-thru swivel jack swings up and out of the way in seconds • Eliminates snap ring and offers stronger mounting system, producing less deflection under load and during operation • 25.3" extended, 10" lift • Wheel dia.: 6" • Mounts on 3.5" tongue 99 1070009 – Wt 15.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

& T O W I N G

B) 1,500 LB MARINE JACK

• Bolt-on mount type; heavy duty yoke type • 10" lift • Tube size: 2-1/4" • Wheel dia.: 8" 1070010 – Wt 19.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8499

C) 1,000 LB TRAILER JACK with FOOT PLATE

• Ideal for ATV, snowmobile, and personal watercraft trailers • 10" lift • Fold-away handle, swing away towing position 1070011 – Wt. 14.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2,250 LB CAPACITY A-FRAME JACK

5,000 LB CAPACITY A-FRAME JACK

• 3 hole mounting plate • Jack fits into a 2-1/4" dia. opening in the A-frame • Welded positive stop • High cap. sealed thrust bearing and extra long handle for easy cranking • Quick detach for foot or caster assembly • Travel: 15" • Height: 8" ret.; 23" ext. 99 8003557 – Wt. 11.6 lbs. . . . . . . . . . . . .

• High capacity sealed thrusted bearing and extra long handle for easy cranking • Welded positive stop • Mounting plate has 3 holes • 15" travel • O’all dim.: 8" retracted, 23" extended 99 8002260 – Wt. 14.0 lbs. . . . .

5899

5,000 LB CAPACITY MECHANICAL IMPLEMENT JACKS

TOPWIND

HEIGHT

Mount Travel Retracted Extended Wt. Height* Height* (lbs.) D Flange 10" 11-7/8" 21-7/8" 15.0 D Flange 15" 14-7/8" 29-7/8" 18.2 E D F E Ring 10" 11-7/8" 21-7/8" 12.1 E Ring 15" 14-7/8" 29-7/8" 14.9 F Flange 15" 14-7/8" 29-7/8" 19.4 * Retracted and extended dimensions measured from centre of mounting plate to ground. HEIGHT

308

SIDEWIND

• Zinc chromate finish on inner tube, powder coat finish on outer tube • Topwind features high capacity sealed thrust bearings • Sidewind features zerk fitting for easy maintenance • Large 6" x 8" foot plate for greater stability Available in 2 heights each, with 2 mounting styles. FLANGE MOUNT – Spring-release catch holds jack in vertical or horizontal position. RING MOUNT – Locked in position with easy to remove pin. ITEM

PRICE

1050244 1050269 1050251 1050277 1050400

52.99 56.99 44.99 54.99 69.99

7,000 LB CAPACITY JACKS • Heavy 2-3/4" outer wall • 6" x 8" foot plate • Zinc plated inner leg and drop tube • O'all height: 23" retracted, 51.5" extended

R A I L E R

A) SIDEWIND JACK

13-1/2" drop leg adjustment, 15" screw travel. 28" total height adjustment. 8002257 – Wt. 27.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10999

B) TOPWIND JACK

13" drop leg adjustment, 15" screw travel. 28" total height adjustment. 1050035 – Wt. 22.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7499

12,000 LB CAPACITY DROP LEG JACK

& T

• Drop leg section can be adjusted up and down with locking pin • 4" heavy wall outer tubing • Self lubricating thrust bearing for efficient lifting • Precision cast gears • 10" x 12" base • Drop travel: 10" • Screw travel: 12-1/2" • Total travel: 22-1/2" • O’all height: 25" ret.; 47-1/2" ext. 8002256 – Wt. 58.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O W I N G

19999

COUPLERS & HITCHES TRAILER COUPLERS COUPLER BALLS

• Zinc plated • Features positive trigger locking or unlocking operation Ball Class Fits Max. Wt. ITEM PRICE Size Tongue GVW (lbs.) Ball Size Bolt Size 1-7/8" I 2" 2,000 lbs. 2.4 4200045 19.99 1-7/8" 3/4" 1-7/8" I 2-1/2" 2,000 lbs. 2.5 4200046 19.99 1-7/8" 1" 1-7/8" I 3" 2,000 lbs. 2.5 4200047 19.99 2" 3/4" 2" II 2" 3,500 lbs. 3.9 4200048 22.99 2" 1" 2" II 2-1/2" 3,500 lbs. 4.0 4200049 22.99 2-5/16" 1" 2" II 3" 3,500 lbs. 5.1 4200050 22.99 2-5/16" 1-1/4" 2" III 3" 5,000 lbs. 5.2 4200052 29.99

2" 2-5/16"

III IV

Max. GVW 5,000 lbs. 10,000 lbs.

Wt. (lbs.) 1.7 2.4 2.1 2.6 3.4 4.0

ITEM

PRICE

4201521 4201539 4201513 4201547 4201836 4200172

6.99 7.99 6.99 7.99 12.99 14.99

HITCH BALL COVERS

“A” FRAME TRAILER COUPLERS

Ball Size Class

Capacity 2,000 lbs. 2,000 lbs. 3,500 lbs. 5,000 lbs. 5,000 lbs. 10,000 lbs.

Wt. ITEM PRICE (lbs.) 6.1 4200002 36.99 8.7 4200010 42.99

• Helps protect the hitch ball and your hands from rust and dirt • Sturdy vinyl construction Wt. 0.1 lbs.

4200042 – Fits 1-7/8" and 2" ball . . . . . . . . . . . . . 4200117 – Fits 2-5/16" ball . . . . . . . . . . . . . . . . . . . .

299 299

309

T R A I L E R

& T O W I N G

PINTLE HOOKS A

8 TON with 2" BALL COUPLER

20 TON

5 TON

A B C D

15 TON

Max. Gross Vehicle Wt.

Max Vertical Load

10,000 lbs. 16,000 lbs. 30,000 lbs. 40,000 lbs.

700 lbs. 3,000 lbs. 6,000 lbs. 8,000 lbs.

Wt. (lbs.) 14.8 13.1 10.2 13.0

ITEM

PRICE

4200147 4200126 4200128 4200139

99.99 119.99 91.99 99.99

TOW RING ASSEMBLIES ADJUSTABLE TOW RING ASSEMBLY

4-BOLT DRAW BAR

• 2,000 lb. vertical load • 12,000 lb. max. gross trailer weight • 3" I.D. eye • Complete with fasteners • 3-position channel 4200130 – Wt. 16.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

5499

• 7,000 lb. max. vertical load • 35,000 lb. max. gross trailer weight • Mounts with four 5/8" bolts on 4-1/2" centre mounting holes • 2-1/2" I.D. eye • 1-1/4" x 1-1/2" dia. ring material 4200132 – Wt. 16.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

5 TON PINTLE HOOK

PINTLE MOUNT

• Heavy duty towing pintle hook • Spring loaded lock with safety pin • Corrosion resistant black epoxy finish 8002735 – Wt. 7.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• 10,000 lb. capacity • Pintle hook can be mounted in a high or low position • Vertical distance between holes is 1-3/4" • Accepts pintle hooks with 3-3/8" and 3-1/2" spacing • Fits standard 2" receiver opening • Continuous welds, epoxy coated 8004510 – Wt. 14.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

5999

7799

4999

6,000 LB CAP. BRAKE ACTUATOR

• Mechanical over hydraulic • Lever lock, straight • Tongue weight: 600 lbs. • Ball coupler attachment: 1-7/8" - 2" ball 4200066 – Wt. 17.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22999

HITCH and TRAILER LOCKS G

E) LOCKING HITCH PIN

Replaces standard hitch pin. 8043814 (1/2" dia.) – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . 8043823 (5/8" dia.) – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

9 1299 99

F) 2" SHACKLE TRAILER LOCK

• Plastic cover protects cylinder from ice, sand, and grime • Prevents scratching and marring of surfaces • 2" wide body 99 8026619 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G) CLASS III LOCKING HITCH PIN

Plastic cover protects against adverse weather, prevents marring and scratching. 99 8026708 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

PULL PINS 310

H) 1/2" PIN and CLIP 4200041 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I) 5/8" PIN and CLIP 4205217 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399 599

CLASS II BALL MOUNTS

• Fits all Class II receivers • Ball mount can be reversed for lift A) STRAIGHT BALL MOUNT

• 1-1/4" x 1-1/4" solid bar with 3/4" ball hole • Total rise 3/4", total drop 1-1/4" 8002960 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1999

B) 3-1/2" BALL MOUNT

• 1-1/4" x 1-1/4" bar with 3/4" ball hole • Total rise 3", total drop 3-1/2" 8002962 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2299

C) 4" BALL MOUNT

• 3/4" x 2-1/2" with 3/4" ball hole • Total rise 4", total drop 4" 8002965 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CLASS III/IV BALL MOUNTS

1999

• 2" x 2" bar with 1" ball hole • Ball mount can be reversed for lift • Gross trailer weight: 5,000 lbs. • Tongue weight: 500 lbs. BLACK FINISH

CHROME FINISH

2" drop 3-1/4" drop

Wt. (lbs.) 6.6 7.2

ITEM 8049499 8049505

2" drop 3-1/4" drop 6" drop 8" drop

PRICE 29.99 34.99

Wt. (lbs.) 6.6 7.9 9.2 16.6

ITEM 8049328 8049346 8049364 8002328

PRICE 25.99 26.99 32.99 48.99

CLASS III and IV BALL MOUNTS

ADJUSTABLE BALL MOUNT

• 2" x 2" bar with 1" ball hole • Ball mount can be reversed for lift

• Adjusts from 7-1/2" drop to 6-1/2" lift • Fits 2" square tubing • Tongue weight: 500 lbs. • Gross trailer weight: 5,000 lbs. • Accommodates trailer balls with up to 1" shank 4200038 – Wt. 13.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Total Drop Total Rise Wt. (lbs.) ITEM PRICE 2" 3/4" 6.1 4205225 32.99 3-1/4" 2" 6.7 4205035 36.99 6" 4-3/4" 8.0 4205043 42.99

TRAILER HITCHES

Year 1988-00 1992-00 1999-04 1971-93 1994-01 2002 1973-79 1980-86

CLASS III (MODEL #37069)

• Gross trailer weight: 5,000 lbs. max. • Tongue weight: 500 lbs. max. • 7,500 lb. gross trailer weight and 750 lb. tongue weight can be achieved by using a weight distributing hitch • For use with small to mid-size trailers • Accepts 2" square ball mount 99 4205001 – Wt. 47.6 lbs. . . . . . . . . . . . .

179

CLASS III/IV (MODEL #37094)

1987-96 1997-03 2004 1997-03 2000-03 1997 1999-04

6699

Vehicle Chevrolet Pickup, C/K Series w/8 ft. bed, 2 dr. regular and extended cab Chevrolet Pickup, C/K Series w/8 ft. bed, 4 dr. crew cab Chevrolet Pickup, Silverado, all 1500 Series and 2500 LD, 2 and 4 wd. Dodge Pickup, D/W Series, full size Dodge Pickup, Ram, full size Dodge Pickup, Ram, full size 2500/3500 only Ford F-100, F-150, F-250, F-350 Ford F-100, F-150, F-250, F-350 all, inc. Supercab, will not fit custom fascia Ford F-100, F-150, F-250, F-350 Styleside/Flareside, all models inc. Supercab Ford F-150 and F-250 Light Duty Styleside Ford F-150 Heritage Flareside and Heritage Styleside (old body style) Ford F-150 Light Duty Flareside Ford F-150 SuperCrew Ford F-250 and F-350 Heavy Duty Ford F-250 and F-350 Super Duty Pickups only - Will not fit Cab and Chassis GMC Pickup, C/K Series w/6 ft. and 8 ft. bed, 2 dr. regular and extended cab, inc. Sportside fenders GMC Pickup, C/K Series w/8 ft. bed, 4 dr. Crew Cab GMC Pickup, Sierra, all 1500 Series and 2500 LD, 2 and 4 WD Toyota Tundra

• Gross trailer weight: 7,000 lbs. 1988-00 • Tongue weight: 600 lbs. • 12,000 lb. gross trailer weight and 1,200 1992-00 tongue weight can be achieved by using a 1999-04 weight distributing hitch • Accepts 2" square ball mount 99 2000-04 4200028 – Wt. 59.5 lbs. . . . . . . . . . . . . We can special order any hitch! Visit your nearest Princess Auto store, or call us: 1-800-665-8685.

199

R A I L E R

& T O W I N G

311

TRAILER HITCHES

R A I L E R

CLASS II TRAILER HITCH

MODEL #X-23

129

CLASS III TRAILER HITCH

• Telescopic design allows for use on most current full-size and compact pickup trucks and vans • 500 lb. tongue weight • Rated 5,000 lbs. Gross Trailer Weight • 7,500 lbs. with weight distributing hitch • Applications include: Ford, Chevy, GMC and Dodge fullsize trucks; Dodge Dakota, Ford Ranger, Toyota, Nissan, Chevy S10, and Sonoma pickup trucks; Chevy, GMC, and Ford full-size vans 99 4200523 – Wt. 45.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MODEL #X-50

159

& T O W I N G

• 350 lbs. tongue weight • Rated 3,500 lbs. gross trailer weight • Fits most full-size and compact pickup trucks, sport/utility vehicles and many mini-vans 99 4200033 – Wt. 32.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CLASS III/IV TRAILER HITCH

• 500 lb. tongue weight • Rated 5,000 lbs. gross trailer weight • 10,000 lbs. with weight distributing hitch • Fits most full-size pickup trucks 4200034 – Wt. 44.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MODEL #X-40

15999

STEP and BUMPER HITCH • Class II rating • Accepts 2" square ball mount • Bolts to step bumper with included hardware 8004694 – Wt. 14.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4699

ROTATING HITCH ASSEMBLIES • Rotate assembly to the size of ball you need • Fits 2" receivers

B) 3 BALL

A) 2 BALL

• 2,000 lb. and 3,500 lb. capacity • 1-7/8" or 2". 4200076 – Wt. 8.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 2,000 lb., 3,500 lb. and 5,000 lb. capacity • 1-7/8", 2" or 2-5/16". 4200075 – Wt. 10.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

5999

TOW BAR • Provides a convenient way to tow your truck • Towing arms are fully adjustable with a max. width of 37-1/2" • Mounting brackets attach to vehicle using 5/8" bolts • Quick release pins to remove bar when not in use • Constructed of 2" hollow structural steel tubing • 5,000 lb. coupler fits 2" ball • O’all length: 51" (use with safety chains) 99 2081255 – Wt. 34.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

189

POLY TRAILER TONGUE BOX

5,200 LB TRAILER SAFETY CHAIN

312

• 1/4" x 48" • Includes 2 hooks with safety catch • Class III 8002889 - Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1699

• Moulded high density polyethylene • O’all dim.: 32" x 20" x 13" 8051617 – Wt. 21.8 lbs. . . . . . . . . . . . . . . . . . . . . .

14999

TRAILER DOLLY

2 PC GRAB BAR SET • For use on pick-ups, vans, boats, and SUVs • Black nylon bracket with stainless steel tubes and screws 99 4220020 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

SPRING LATCH • 1/2" pin • Mounting bracket measures: 3" x 1-3/4" 3893187 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . • 600 lb. capacity • Comes with 1-7/8" trailer ball • Ideal for moving small boat, snowmobile, or utility trailers 8002066 – Wt. 29.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

TRAILER LEVELS

9999

1099

LITEMATE®

• Adhesive back • 2" long 4200105 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

599/pr.

WAGONS ATV WAGON • Tires: 16 x 6.50-8 • Frame measures: 36" wide • Adjusts from 50" to 78" long • Capacity: 2,200 lbs. 2440011 – Wt. 114.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

39999

FLAT BED WAGONS

R A I L E R

& T O W I N G

550 LB CAPACITY

• Auto-style steering for easier turning • Expanded metal deck: 24" x 48" x 13" • Pneumatic tires: 4.10/3.50-4 2440078 – Wt. 55.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

1,100 LB CAPACITY

• Auto-style steering for easier turning • Expanded metal deck: 24" x 52.4 x 14.6" • Pneumatic tires: 4.10/3.50-4 8003261 – Wt. 66.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

INDUSTRIAL FARM WAGONS

12999

AVAILABLE BY SPECIAL ORDER ONLY!

Capacities include: 5, 7, 8, 10, 11, 13 or 15 ton Also available: 12 ton tandem. Contact your nearest Princess Auto location, or call our National Call Centre in Winnipeg toll free at

1-800-665-8685

313

TRAILER BLUEPRINTS

T R A I L E R

• Road tested designs • DOT approved wiring and lighting • Clear, step by step instructions with bill of materials • Engineer approved drawings • Welding procedures Wt. 0.8 lbs.

& T O W I N G

D) CAR DOLLY

A) 10 FT HYDRAULIC DUMP BED

• 7,000 lb capacity • 10 ft. x 5ft. 8003625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

• Swivel tray design • 6 ft. width 8003581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

E) 16 FT TANDEM LOWBODY UTILITY

B) 8 FT SINGLE AXLE UTILITY

• 2,000 lb capacity • 8 ft. x 48" 8003509

• 7,000 lb capacity • 16 ft. x 78" 8003572 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3699

F) 18 FT CAR CARRIER TANDEM

C) 10 FT SINGLE AXLE

• 3,500 lb capacity • 10 ft. x 72" 8003518 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

• 10,400 lb capacity • 18 ft. x 80" 8003590 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

WIRING

314

PARALLEL BONDED WIRE

PVC INSULATED WIRE

• 4 wire strand Gauge Length Wt. (lbs.) ITEM 14 price per ft. 0.1 4211355 14 25 ft. pkg. 1.9 4214219

Designed for temperature ratings of -70°C to 60°C (-94°F to 140°F). Wire Gauge Strands Wt. (lbs.) ITEM 14 2 0.4 4210624 14 4 0.1 4210625 14 6 0.1 4210626 12 7 0.1 4210627

PRICE 0.89/ft 17.99

PRICE 0.39/ft. 0.89/ft. 0.99/ft. 1.99/ft.

PRIMARY WIRE • Thermoplastic coated copper wire • For all general purpose automotive and trailer applications Gauge 18 18 16 16 14 14 12 12 10 8

Length 25 ft. 100 ft. 25 ft. 100 ft. 25 ft. 100 ft. 25 ft. 100 ft. 25 ft. 25 ft.

Red 4210066 4210035 4210060 4210029 4210054 4210022 4210047 4210015 4210041 4210075

Black 4210067 4210036 4210061 4210030 4210055 4210023 4210048 4210016 4210042 4210077

Green 4210069 4210037 4210062 4210031 4210056 4210024 4210049 – – –

White 4210070 4210038 4210063 4210032 4210057 4210025 4210051 4210018 4210044 –

VEHICLE-TO-TRAILER WIRING SYSTEMS Hoppy # 41125 41145 42115 42135 40125 40145 47175

Blue 4210071 4210039 4210064 4210033 4210058 4210026 4210052 4210020 4210045 –

Yellow WT. (lbs.) PRICE 4210072 0.2 3.49 4210040 0.9 7.99 4210065 0.3 3.99 4210034 1.2 9.99 4210059 0.4 4.99 4210028 1.7 12.99 4210053 0.7 4.99 4210021 2.6 19.99 4210046 1.1 8.99 – 1.9 13.99

VEHICLE T-CONNECTORS

Vehicle CHEVROLET/GMC

1988-98 Full-size P/U, 1992-94 Full-size Blazer, 1992-99 Suburban, 1995-99 Tahoe and Yukon 1999-02 Silverado, Sierra, 1500 Series DODGE/CHRYSLER/PLYMOUTH

1995-02 Full-size Ram P/U, 1995-03 Dakota 2002-03 Ram 1500 Pickup (except 2500/3500) FORD/MAZDA

1987-96 F-150, F-250, F-350 P/U, 1997-98 F-250, F-350 dual wheel 1997-03 F-150, F-250, F-250 Light Duty UNIVERSAL MULTI-TOW 6:4

• Installs quickly and easily; no wire cutting, stripping, or tapping • Plug into the tail light harness of the vehicle • Includes a detachable 4-way flat harness Hoppy # 41125 42115 40125 40145 41145 42135 47175

Wt. (lbs.) 0.4 0.8 0.5 0.8 0.4 0.8 0.4

ITEM 4210426 4210438 4210422 8003739 8003743 8003744 8003745

PRICE 22.99 34.99 22.99 29.99 33.99 54.99 33.99

TRAILER CONNECTORS B

A) FLAT TRAILER CONNECTOR

Includes four 25 ft. leads,18" ground wire, flat plug trunk connector with three 48" wires, and ground wire. 4200186 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999 B) 2 FT HARNESS with 4-WIRE CONNECTOR 99 4210429 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 C) 4 FT HARNESS with 7-WIRE CONNECTOR 99 8005746 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 29 D E F G H I

Pins 4 4 6 6 7 7

Wt. (lbs.) 0.2 0.4 0.4 0.4 0.2 0.3

ITEM 4210110 4210111 4210112 4210113 4210114 4210115

R A I L E R

PRICE 6.99 6.99 8.99 8.99 7.99 7.99

& T O W I N G

A C

PLUGS and ADAPTERS J) 6-WAY ROUND to 4-WAY FLAT 8001241 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . K) 7-WAY RV BLADE to 4-WAY FLAT 8001242 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . L) 7-WAY RV BLADE to 6-WAY ROUND 8001243 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1199 1199 1899

MOUNTING BRACKETS M) 4, 5, 6-POLE MOUNTING BRACKET 4200102 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . N) 7, 9-POLE MOUNTING BRACKET 4200103 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

599 599

315

T R A I L E R

& T O W I N G

TRAILER HOOK-UP ASSEMBLIES

2 PIN, 10-GAUGE WIRE 4212080 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 4 PIN, 16-GAUGE WIRE 4212072 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

ELECTRICAL TESTER

599 399

CONNECTORS & TERMINALS

• Tests outlets, switches, fuses, spark plugs, and condensers • Checks for current, DC polarity, frequency and polyphase line • Measures: 110, 220, 360, and 480 volt • Complete with test leads • O’all dim.: 7"L x 4-3/4"W x 1"H 0720322 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TERMINAL KITS

TERMINALS and TERMINAL KITS

150 PC ASSORTED TERMINAL KIT

RING TERMINALS

Wt. 0.1 lbs.

Gauge 16-14 12-10 12-10 12-10 12-10

Colour Stud Size Qty. ITEM PRICE blue 7/32" 10 4210383 0.99/pkg. yellow 7/32" 6 4210384 0.99/pkg. yellow 1/4" 4 4210385 0.99/pkg. yellow 5/16" 4 4210386 0.99/pkg. yellow 3/8" 4 4210387 0.99/pkg.

FEMALE BLADE RECEPTACLE

Colour blue blue

Qty. 10 6

ITEM 4210392 4210393

PRICE 1.49/pkg. 1.49/pkg.

ITEM 4210391

PRICE 0.99/pkg.

FEMALE BULLET RECEPTACLE

Colour blue

Qty. 5

BUTT CONNECTOR

Wt. 0.1 lbs.

Gauge 22-16 16-14 12-10

Colour red blue yellow

Qty. 11 11 6

ITEM 4210388 4210389 4210390

PRICE 0.99/pkg. 0.99/pkg. 0.99/pkg.

200 PC BUTT CONNECTOR KIT

316

Terminal Butt Connector Butt Connector Ring Terminal Ring Terminal Ring Terminal Blade Connector Blade Connector Spade Terminals

999

Gauge Colour Size Qty. 22-16 red – 10 16-14 blue – 5 22-16 red #6 30 16-14 blue #6 30 16-14 blue #10 5 16-14 blue male – 5 16-14 blue female – 5 22-16 red #8 10

4210799 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

Gauge 16-14

Contains: • 30 cable binders • 120 assorted red and blue ring terminals • Plastic storage case 4211087 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

100 PC ASSORTED TERMINAL KIT

Wt. 0.1 lbs.

Gauge 16-14 12-10

189

Contains: • 50 red 22-16 gauge • 100 blue 16-14 gauge • 50 yellow 12-10 gauge 4210400 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

999

400 PC ASSORTED TERMINAL KIT

(16-14 gauge) Terminal/Connector Gauge Colour Size Butt Connector 22-16 red – Butt Connector 16-14 blue – Butt Connector 12-10 yellow – Ring Terminal 16-14 blue 7/32" Ring Terminal 16-14 blue 1/4" Ring Terminal 12-10 yellow #10 Ring Terminal 12-10 yellow 1/4" Ring Terminal 12-10 yellow 5/16" Ring Terminal 12-10 yellow 3/8" Blade Connector 16-14 blue female – Blade Connector 12-10 yellow female – Blade Connector 16-14 blue male – Blade Connector 12-10 yellow male – Bullet Connector 16-14 blue female – Bullet Connector 16-14 blue male – • 20 blue tap-in-splice connectors (16-14 gauge) • Plastic storage case 4210401 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Qty. 30 40 30 20 20 20 20 25 25 40 25 25 5 20 15

3999

CONNECTORS & TERMINALS

Gauge Stud Size Qty.

• All Grote terminals are vinyl insulated with PVC insulation support • Terminals are recommended for continuous operating temperatures of 40° to 90°C (104° to 194°F) with a max. intermittent temperature of 150°C BULLET CONNECTORS/RECEPTACLES Wt. 0.1 lbs.

Gauge 16-14 16-14

Type connector receptacle

Qty. 15 15

ITEM 4210638 4210640

PRICE 2.49/pkg. 2.49/pkg.

TAP-IN-SPLICE

Hot line and tap-in line are inserted into clip. Metal clip is compressed with pliers. Lock cover is then snapped closed. Makes tap-in line or pigtail connections without cutting or stripping wires. Wt. 0.1 lbs.

Gauge Qty. ITEM PRICE 22-18 5 4210680 2.99/pkg. 16-14 25 4210681 2.99/pkg. 16-14 5 4210682 1.99/pkg.

PRICE 5.99/pkg. 5.99/pkg. 6.99/pkg. 7.99/pkg.

22-16 16-14 16-14 12-10

4-6 4-6 8-10 8-10

15 15 15 15

ITEM PRICE /pkg. 4210633 2.49 4210635 2.49 4210636 2.49 4210637 2.99

& T

MALE QUICK CONNECT Wt. 0.2 lbs.

Gauge 22-16 16-14 22-16 16-14 12-10

Resists corrosion and environmental elements. Wt. 0.1 lbs.

ITEM 4210671 4210674 4210672 4210673

Gauge Stud Size Qty.

Qty. 100 15 15

ITEM 4210650 4210651 4210652

PRICE 8.99/pkg. 1.99/pkg. 1.99/pkg.

O W I N G

Qty. 100 15 15

ITEM 4210653 4210654 4210655

PRICE 8.99/pkg. 1.99/pkg. 1.99/pkg.

BUTT CONNECTORS Wt. 0.2 lbs.

NYLON CLAMPS

Size Qty. 1/4" 10 3/8" 10 1/2" 10 3/4" 10

R A I L E R

SPADE TERMINALS Wt. 0.1 lbs.

Gauge 16-14 16-14 12-10

Wt. 0.2 lbs.

ITEM 4210666 4210669 4210667 4210668

ITEM PRICE /pkg. 4210646 1.99 4210647 1.99 4210648 1.99 4210649 1.99 4210628 2.99 4210629 2.99 4210630 2.99 4210631 3.99 4210632 7.99

FEMALE QUICK CONNECT Wt. 0.2 lbs.

Neoprene cushioned for electrical insulation and vibration absorption. Qty. 15 15 15 15

22-16 8-10 15 16-14 6-8 15 16-14 8-10 15 16-14 12-1/4" 15 12-10 8-10 15 12-10 12-1/4" 15 12-10 5/16"-1/2" 15 12-10 3/8" 15 16-14 8-10 100

Gauge 16-14 16-14 12-10

RUBBER INSULATED CLAMPS

Size 1/4" 3/8" 1/2" 3/4"

RING TERMINALS Wt. 0.1 lbs.

PRICE 1.99/pkg. 1.99/pkg. 1.99/pkg. 1.99/pkg.

Qty. 100 100 15 15 15

ITEM 4210641 4210642 4210643 4210644 4210645

PRICE 8.99/pkg. 8.99/pkg. 1.99/pkg. 1.99/pkg. 2.49/pkg.

FULLY INSULATED QUICK CONNECTORS

16-14 gauge. Wt. 0.1 lbs.

99 PC NYLON CLAMP KIT

Type Qty. Male 15 Female 15

ITEM 4210657 4210658

PRICE 2.49/pkg. 2.49/pkg.

ASSORTED GROMMETS

Assorted nylon clamps in a plastic storage case. 4211166 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

30 various sized grommets. 4210675 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

299/pkg.

ALLIGATOR CLIPS Wt. 0.1 lbs.

Size 1-7/16" 2-1/4" 2-1/2"

Colour 5 red/5 black 5 red/5 black 5 red/5 black

Qty. 10 10 10

Wt. (lbs.) 0.1 0.1 0.2

ITEM 4211044 4211046 4211045

PRICE 5.99/pkg. 7.99/pkg. 9.99/pkg.

• 1-7/8" chrome finished clips • Pkg. of 6 99 4210784 – Wt. 0.1 lbs. . . . . . .

317

WIRE STRIPPERS & CRIMPERS

R A I L E R

A) CRIMPING TOOL

2999 299

B) 4-WAY CRIMP TOOL 4200081 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 7-IN-1 WIRE STRIPPER

• Wire stripper and cutter, steel wire cutter, pliers, wire loop, and crimping tool • Marked both SAE and metric 99 8025308 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) AUTO WIRE STRIPPER with WIRE CUTTER

& T O W I N G

• Crimp and cut both insulated and non-insulated solderless connections and terminals • 9-3/4" long • Handles wire from 10-22 AWG 2922748 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Self-adjusting unit strips wire from 0.2 to 6 mm. 2990205 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

E) 48 PC CRIMPER TOOL SET

• Crimper tool also cuts and strips wire • Assorted ring, spade, blade, and butt connectors 4213013 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899

F) AUTOMATIC WIRE STRIPPER

• Strip insulation from 8- to 18-gauge wire • Automatic delay action return avoids crushing fine wire • Wire length control attachment included 99 2920569 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G) WIRE STRIPPER and CRIMPER

• Crimps open barrel, non-insulated and insulated terminals • Cuts bolt sizes: M-2.6, P.045, M-3.0, P.050, M-3.5, P0.60, M-4.0, P0.70, M-5.0, P0.80 • Strips AWG NO.: 20-22, 18, 16, 14, 12, 10, MM2: 0.5-0.75, 1.0, 1.5, 2.5, 4.0, 5.0-6.0 49 8002261 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F G

H) DIAGONAL PLIERS / WIRE STRIPPER

• 1,000 volt insulated grip • 5 functions: wire cutter, 7 size stripper, multi crimper, small nut wrench and opener 99 2920146 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I) ADJUSTABLE HEAVY DUTY WIRE STRIPPER

• Self adjusting strippers combine with adjustable stopper for wire stripping length • Cut and strip 10-24 AWG copper or aluminum wire, solid or stranded • Crimp 10-22 AWG insulated terminals • Crimp 4-22 AWG non-insulated terminals • Crimp 7-8 mm ignition terminals 99 2990264 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SHRINK TUBING

318

• 2 to 1 shrink ratio • Highly flexible, polyolefin • CSA APPROVED • 125°/600 volt Dia. Length Colour Wt. (lbs.) 1/8" 25 ft. Black 0.1 1/8" 25 ft. Red 0.1 3/16" 25 ft. Black 0.2 3/16" 25 ft. Red 0.2 1/4" 15 ft. Black 0.1 3/8" 10 ft. Black 0.1

6" lengths. Wt. 0.1 lbs.

ITEM PRICE 4210870 8.99 4210871 8.99 4210868 9.99 4210869 9.99 4210866 7.99 4210864 6.99

Sizes & dia. one 3/4", two 1/2", two 3/8", two 1/16" five 1/2" five 3/8" two 1/4", two 3/16", two 1/8" six 1/4" six 3/16"

Colour Black/ White Assorted Assorted Black/ White Assorted Assorted

ITEM PRICE 4210877 2.99/pkg. 4210873 2.99/pkg. 4210872 2.99/pkg. 4210876 2.99/pkg. 4210875 2.99/pkg. 4210874 1.99/pkg.

• 3 to 1 shrink ratio • Adhesive lined to seal out water • Semi-rigid, polyolefin

HEAT SHRINK TUBING

Wt. 0.1 lbs.

• 3" lengths, sizes: 1/8" and 3/16" • Qty.: 10 pieces 4210967 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

599

I.D. 2.0 mm 3.0 mm 3.5 mm 5.0 mm 6.0 mm 7.0 mm

Length 6" 6" 6" 6" 6" 6"

Qty. 50 50 50 50 50 50

CABLE TIES 25 PC CABLE TIES

7-1/4" x 3/16". 8006138 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Size 3" x 3/32"* 8" x 1/8"** 4"* and 8"** 9-1/2" x 1/4"** 11-1/4" x 1/4"** 14-1/2" x 3/16"** * 18 lb. tensile strength

Qty. 1,000 1,000 100 100 100 100

Wt. (lbs.) 0.4 0.2 0.1 0.6 0.7 0.5

149

ITEM PRICE 8006126 9.99/pkg. 8006129 29.99/pkg. 8006131 3.99/pkg. 8006134 9.99/pkg. 8006136 13.99/pkg. 8006137 16.99/pkg. ** 50 lb. tensile strength

UV RESISTANT CABLE TIES

Size 4" long 4" long 8" long 8" long

Qty. 30 100 15 100

Wt. (lbs.) 0.1 0.1 0.2 0.2

ITEM 8006144 8006145 8006146 8006147

PRICE 1.99/pkg. 2.99/pkg. 1.99/pkg. 5.99/pkg.

100 PC REUSABLE CABLE TIES 5-1/2" LONG 8006140 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1/2" LONG 8006142 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1/2" LONG 8006143 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

449/pkg. 549/pkg. 749/pkg.

ITEM 4210091 4210092 4210093 4210094 4210095 4210096

PRICE 6.99/pkg. 7.99/pkg. 7.99/pkg. 9.99/pkg. 10.99/pkg. 13.99/pkg.

R A I L E R

& T O W I N G

125 PC CABLE TIES

25 of 4"/18 lb. tensile strength, 25 of 8"/18 lb. tensile strength, 25 of 8"/50 lb. tensile strength, 25 of 11-1/2"/40 lb. tensile strength, 25 of 15-1/2"/50 lb. tensile strength. 99 8006675 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

650 PC CABLE TIES

100 natural coloured 4" ties; 300 natural coloured 8" ties; 50 natural coloured 11" ties and 50 each green, yellow, red and blue 4" ties. 99 8006148 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CABLE TIE GUN

Tightens any length of cable tie. 8007630 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

319

WIRE LOOM

R A I L E R

Protect trailer and automotive wires from damage and weathering. Dia. Length Wt. (lbs.) ITEM 1/4" 25 ft. 0.2 4213161 3/8" 25 ft. 0.3 4213179 1/2" 25 ft. 0.5 4213195

& T O W I N G

PRICE 8.99 9.99 9.99

INLINE FUSE HOLDERS A) FOR 20 AMP FUSES

14-gauge wire. 4216636 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

A) FOR 30 AMP FUSES

12-gauge wire. 4216669 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

B) HEAVY DUTY INLINE FUSE HOLDER

Use with ATO 25 or ATO 30 fuses. 4219663 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FUSES

199 FUSE BLOCK

Bussmann®

E F

C) GLASS FUSES – Pkg. of 5 Wt. 0.1 lbs.

Size AGC AGC AGC AGC AGC SFE

3A 5A 15A 20A 30A 20A

ITEM 4210692 4210743 4210693 4210694 4210741 4210698

PRICE 1.99/pkg. 1.79/pkg. 1.99/pkg. 1.99/pkg. 1.79/pkg. 1.99/pkg.

D) ATM FUSES – Pkg. of 5 Wt. 0.1 lbs.

Size 10A 15A 7-20A 25A 30A

Colour red lt blue yellow clear green

ITEM 4210754 4210755 4210756 4210757 4210758

Wt. 0.1 lbs. Pkg. of 5

E) ATC FUSES – Pkg. of 5 Wt. 0.1 lbs

4210749 . . . . . . . . .

Size Colour ITEM PRICE 10A red 4210686 2.99/pkg. 15A lt blue 4210687 2.99/pkg. 20A yellow 4210689 2.99/pkg. 25A clear 4210690 2.99/pkg. 30A green 4210691 2.99/pkg.

299/pkg.

6 ATC FUSES with FUSE PULLER

5, 10, 15, 20, 25, and 30. 4210761 – Wt. 0.1 lbs. . . . . . .

399/pkg.

80 ATC FUSES

10 each of sizes: 3, 5, 7-1/2, 10, 15, 20, 25, and 30. 99 4210765 – Wt. 0.3 lbs. . . . /pkg.

STUD TYPE CIRCUIT BREAKERS

INLINE FUSE HOLDER

• 6-24 volt • Automatic reset • Threaded stud type

Bussmann®

Wt. 0.1 lbs.

4219812 – 20 amp 4219820 – 30 amp 8007214 – 40 amp 8007215 – 50 amp

................. ................. ................. .................

699/pkg.

ATC FUSE PANEL Bussmann®

F) ASSORTED ATC FUSE KITS 6 ATC FUSES

5, 10, 15, 20, 25, and 30. 4210701 – Wt. 0.1 lbs. . . . . . . PRICE 3.29/pkg. 3.29/pkg. 3.29/pkg. 3.29/pkg. 3.29/pkg.

Bussmann® • Holds 1/4" x 1-1/4" fuses • Quick connect terminals

• Holds 6 ATC fuses • 6 circuits rated 30 amps per circuit • Quick connect terminals Wt. 0.1 lbs.

4210767 . . . . . . . . . . . .

1699

FLASHERS Bussmann®

• 2 terminals • Heavy duty 12 volt 2 to 6 BULBS/CIRCUITS

4.49 4.99 5.99 7.99

12.8 amps. 4210748 – Wt. 0.1 lbs. . . Rated 3-30 amps max. 4210760 – Wt. 0.1 lbs. . .

249

20.0 amps. 4210762 – Wt. 0.1 lbs. . .

FOR YOUR INFORMATION... 320

369

1 to 10 BULBS/CIRCUITS

Effective January 1, 2002 trailers in excess of 10,000 lbs. and over 80" in width, that were manufactured prior to 1993 and operated in Canada must be retrofitted with reflective tape.

999

AUTOMOTIVE LIGHTS

HALOGEN WORK LAMP

TRACTOR LAMPS A • H3 55W bulb • Rectangular halogen work lamp • Adjustable mounting for accurate aiming • Intensified beam pattern for brighter output (not legal for street applications) • Shock and vibration resistant for extended life • Easy installation – all hardware included A) FLOOD LAMP 4250161 – Wt. 1.1 lbs. B) SPOT LAMP 4250162 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B • 4" x 6" dimensions • Dual halogen H3 bulbs • 55 W, 12 VDC 8024853 – Wt. 1.6 lbs. . . . . . . . . . . .

3999

2499/ea. CHROME LAMPS

R A I L E R

& T

SPOT LAMPS

5" SPOT LAMP with STONE GUARD

• High impact glass lens in a metal body • Chrome coated stone guard • 12 VDC, 55W • Includes two H3 halogen bulbs and plug in wiring harness with fuse holder 8006319 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

FLOOD LAMPS

Type O'all Dim. Wt. ITEM PRICE (lbs.) 5" 4-3/4" x 6" 1.1 8002640 24.99 lens x 2-3/4" 6" 6" x 7" 1.9 8003925 32.99 lens x 3-3/4"

MINI SPOT LAMP SET

• High impact nylon-fibre glass • 12 VDC, 55W • Includes two H3 super white bulbs, plug-in wiring harness, switch set with relay, and mounting hardware 8006320 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• 12 VDC • 35 watt • 3/8" mounting bolt • Includes mounting hardware • Bright chrome finish

O W I N G

SPOT LAMP 99

• 6" lens • O’all dim.: 6" x 7" x 3-3/4" 8002660 – Wt. 1.9 lbs. . . . . . . . . . . .

3299

12V AUTOMOTIVE BULBS 3-IN-1 LAMP SYSTEM

• Heat resistant glass lens with high impact plastic housing • 12 VDC, 55W • Includes spot, fog and indicator unit, wiring harness, switch, and mounting hardware 8006321 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8999

12V QUARTZ HALOGEN DRIVING LIGHT KIT

• 5"x 3" lens, 55W • Plastic stone guard • Includes switch, wiring, and mounting hardware 4250151 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999set

Type

Wt. (lbs.) #67 0.1 #194 0.1 #1156 0.4 #1157 0.1 #1157N/A 0.1 #1895 0.1 #2057 0.1 #57 0.1 #3157 0.1 #3057 0.1 #1893 0.1 #1003 0.1 #3057/NA 0.1

Qty.

ITEM

2 2 2 2 2 2 2 2 2 2 2 2 2

4210988 4210989 4210990 4210991 4210992 4210994 4210995 4210996 4210998 4210999 4211000 4211001 4211003

PRICE /pkg. 1.99 1.99 1.99 1.99 1.99 1.99 2.49 1.99 2.99 2.99 1.99 1.99 3.49

321

12V RUBBER BODY TRACTOR 5" DIA. and UTILITY LAMPS

R A I L E R

• Rubber body helps eliminate shock and vibration damage to lamp assembly • Body is also rustproof and ozone resistant • Sealed beam unit “snaps into lamp body” eliminating need for lens door and hardware • Universal, adjustable plated steel mounting bracket • 4" long 16-gauge wire pigtail

& T O W I N G

1699 99 4251815 – Wt. 2.1 lbs. . . . . 23 4251807 – Wt. 1.1 lbs. . . . . 6" DIA.

REPLACEMENT SEALED BEAMS 5" DIA. 4254025 – Wt. 0.5 lbs. . . . . . . 8.99 6" DIA. 4254033 – Wt. 0.7 lbs. . . . . . . 9.99

ROTATING BEACON LAMPS

A) AMBER TEAR DROP MODEL

B) WARNING STROBE LIGHT

• Magnetic mounting • Cigarette lighter plug • 1.7 amps • O’all dim.: 7-1/4" x 5" x 5" 4250026 – Wt. 1.8 lbs. . . . . . .

• 12 VDC • Yellow lexan lens • 5" dia. x 4" high • 135,000 candle power 4250028 – Wt. 0.7 lbs. . . . . . . . .

3499

CLEARANCE LAMPS

5999 F

C) 12 VOLT OVAL CLEARANCE LAMPS

• Low profile corrosion-resistant contact and ground, wedge-base bulb • Long life non-corrosive housing • O’all dim.: 4"L x 2"H x 3-1/32"D

Wt. 0.1 lbs.

4216826 – Amber 4216834 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599/ea.

4219168 – Amber 4219176 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.99/ea. • Low profile with seal-tight snap-on lens • Fits all popular mounting holes • O’all dim.: 2-1/2"W x 1"D

8026352 – Red 8027663 – Amber . . . . . . . . . . . . . . . . . . . . . . . . .

399/ea.

H) RECTANGULAR CLEARANCE LAMPS

Wt. 0.1 lbs.

99 /ea.

E) ECONO CLEARANCE MARKER LAMPS Wt. 0.1 lbs.

99 /ea. F) RECTANGULAR CLEARANCE MARKER LAMPS

O’all dim.: 3-7/8"W x 2-1/8"H x 3/8"D.

4216859 – Red 4216842 – Amber . . . . . . . . . . . . . . . . . . . . . . . . .

399/ea.

REPLACEMENT LENSES Wt. 0.1 lbs.

4216867 – Red 4216875 – Amber . . . . . . . . . . . . . . . . . . . . . . . . 1.49/ea. I) CLEARANCE LAMPS

4-3/4" dia. x 2-1/8" chrome plated plastic housing. Wt. 0.3 lbs.

Wt. 0.1 lbs.

8027681 – Red 8027707 – Amber . . . . . . . . . . . . . . . . . . . . . . . . .

• For narrow rails and channels where 2" wide lamps won’t fit • O’all dim.: 3-1/2"L x 1"W x 1-1/8"H

• Low profile, 2 stainless steel grounds, corrosion-resistant contacts • O’all dim.: 4"L x 2"H x 1-1/8"D

D) 12 VOLT ROUND CLEARANCE LAMPS

4219028 – Red 4219036 – Amber . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

REPLACEMENT LENSES Wt. 0.4 lbs.

4216800 – Red 4216818 – Amber . . . . . . . . . . . . . . . . . . . . . . . . .

G) 12 VOLT OVAL CLEARANCE LAMPS

Wt. 0.1 lbs.

399/ea.

4200023 – Red lens 4200022 – Amber lens . . . . . . . . . . . . . . . . . . . . .

599/ea

IDENTIFICATION LIGHT

CAB ROOF LIGHT KIT

322

• 2 pc clearance lights (4.5" x 3.5" x 1.5") • 1 pc 3-lamp cluster marker light (15" x 5" x 1-1/2") • Complete wire harness with quick connectors • All necessary hardware and illustrated installation instructions • Provides maximum visibility • For all pick-ups, vans, trucks, RVs, and trailers • Adapts to curved and flat roofs • Replaceable bulbs 99 8044993 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 3 pc. acrylic red lenses and housing • Mounted on heavy gauge steel bar, black finish • O’all dim.: 2-9/16" x 15-3/16" 99 4200182 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

6 PC MINI MARKER LIGHT SET • Acrylic lens locks into white ABS housing • Includes wiring harness and connectors • O’all dim.: 3/16" x 1" x 1-1/8" 4200183 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

12 VOLT ACCESSORY LIGHTS B

A) BEEHIVE LAMPS

2-1/2" dia. plastic lens and housing with metal mounting bracket. Wt. 0.1 lbs.

4200016 – Red 4200017 – Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

B) 1-1/2" LICENSE PLATE/COURTESY LAMP

White translucent lens on bottom half of light and chrome top half. 99 4200021 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

D) RED TAIL LIGHTS

C) SEALED LIGHT

Wt. 0.3 lbs.

• Polycarbonate lens and sonic welded housing • O’all dim.: 2-1/2" dia. x 11/16" high 8027743 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

GROMMET FOR SEALED LIGHT

Black rubberized plastic. 8027761 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

O’all dim.: 4-1/4" dia. x 3-5/16" deep. 8027770 – With license plate light 8027789 – Without license plate light . . . . . . . . . . .

599

E) RED ACRYLIC TAIL LIGHT

• Universal mount type • Bracket steel housing with license light 4200185 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

LED TRAILER LIGHTS K F

• Sealed lamps, polycarbonate body and lens • Lamps are hermetically sealed. Epoxy resin coated circuit boards are designed with 5 mm LEDs to provide over 100,000 hour life rating. • Meets or exceeds all DOT requirements • Superflex models offer the highest intensity light • Continuous current of 50mA not like the 20mA of standard LEDs

R A I L E R

& T O W I N G

F) 4" LED ROUND STOP/TURN/TAIL LIGHT

56 diodes. 8024933 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

G) 2-1/2" ROUND LED MARKER LAMP L) BULLSEYE LIGHT

4 diodes.

10 diodes.

Wt. 0.1 lbs

8024906 – Amber 8024915 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H) LED OVAL STOP/TURN/TAIL LAMP

13 diodes. 8024899 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3499

GROMMET for OVAL LAMP 8034487 – Wt 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . I) RECTANGULAR MARKER LIGHT with BASE and MOUNT

1.99

M) 4" DIA. RED LIGHT with FLANGE

10 diodes. 8057899 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3699

N) 4" RED LED STOP/TURN/TAIL LIGHT

10 diodes super flux LED. 8006326 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

10 diodes super flux LED. 8006327 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2999

6 diodes.

4 diodes.

Wt. 0.2 lbs.

Wt. 0.1 lbs. 8057924 – Amber 8057933 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K) 4" RED TAIL LIGHT with STAINLESS STEEL FLANGE

3699

2999

P) RECTANGULAR MARKER LIGHT

J) 2" DIA. MARKER LIGHT with RUBBER GROMMET

56 diodes. 8057942 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499

O) 6" RED LED STOP/TURN/TAIL LIGHT

12 diodes. Wt. 0.1 lbs 8057906 – Amber 8057915 – Red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.2 lbs. 8057951 – Amber 8057960 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8006323 – Amber 8006322 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

Q) 4" OVAL MARKER LIGHT

6 diodes. Wt. 0.1 lbs.

8006325 – Amber 8006324 – Red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

323

T R A I L E R

& T

STOP/TURN/TAIL LIGHTS

A) RED TAIL LIGHT KIT with LICENSE PLATE LIGHT

• 12 volt • O’all dim.: 5-9/16"W x 3-1/4" 4216909 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . Without license plate light. 4216917 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1399 1399

REPLACEMENT LENSES for ABOVE

Side lens. 4219143 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 1.99 Round lens. 4219150 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 3.99 B) SIGNAL LIGHTS

• Plastic with snap-on lenses and moulded-in baffle • 4-1/2" high Wt. 0.4 lbs.

8002890 – Amber 4216941 – Red and Amber . . . . . . . . . . . . . . . . . .

O W I N G

C) RED PEDESTAL LIGHT

4-1/2" dia. 4219077 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1599

D) RECESSED TAIL LIGHT

O’all dim.: 5-1/2" dia. x 1-1/2" deep. Rubber mounted. 4219085 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . Steel mounted. 4212841 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT LENS FOR ABOVE 4219127 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . E) STOP TAIL LIGHT

• 4-1/2" dia. • Sealed to keep out rain, salt, and corrosion 4212858 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799 799 1.99

599

TRAILER LIGHTS F) SUBMERSIBLE TRAILER LIGHTS

• For trailers under 80" wide • Meets all SAE specifications • Fast, trouble free mounting • Ideal for use on boat, snowmobile, motorcycle, and utility trailers • Includes: complete wiring, license plate bracket, mounting hardware, mounting instructions, side marker lights 99 4200174 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

F) TRAILER LIGHT KIT

• 2 stop/tail/turn red lights with red side marker • License plate light and holder • 2 amber side markers 4200110 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

3499

G) SUBMERSIBLE TRAILER LIGHTS

• Square submersible tail lamps with air-gap bottom design to protect from water contact • 7-function: stop, tail, turn, side marker, side and rear reflector, and license lamp • Complete with wire harness 99 4200283 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

H) CHANNEL STYLE SUBMERSIBLE TRAILER LIGHT KIT

• Low profile tail light, perfect for boat, personal watercraft, and snowmobile trailers • Functions include: stop, turn, tail, rear and rear side reflector, rear side marker, rear clearance • Complete with wiring & mounting hardware 99 4200157 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

I) SUBMERSIBLE LED TRAILER LIGHT KIT

324

Includes: 2 pc. stop/tail lights, 25 ft. wire harness, 4 ft. trunk connector, license bracket and mounting hardware. 99 8006318 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

I) SUBMERSIBLE LED TRAILER LIGHT KIT

Includes: 2 pc. stop/tail lights, 2 pc amber side marker lights, 25 ft. wire harness, 4 ft. trunk connector, license bracket and mounting hardware. 99 8006317 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

12 VOLT TOWING LIGHT KITS • Use with RVs, cars, boats, tow trucks and machinery • Easy hook-up and removal connects easily to any standard automobile lighting system A) 12V TOWING LIGHT KIT

• Two 4-5/16" dia. red/amber lights with magnetic base • 20 ft. wiring harness with standard 4 pin connector • Heavy duty magnetic base, with 8 lbs. pull, has a non-scratch vinyl covering to protect vehicles finish 8002381 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A B

4999

B) 12V TOWING LIGHT KIT

• Two 4-1/2" dia. red lights with magnetic base • 20 ft. wiring harness with 4-pin connector 8002382 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499

C) 12V HEAVY DUTY TOWING LIGHTS

• Two 4" dia. red lights with magnetic base • 9 ft. 6" wire between lights • 25 ft. wiring harness with 4-pin connector 8056113 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10999

D) EZ MOUNT TOWING LIGHTS

• Functional tow lights with easy mounting hinged flaps that hook into trunk of vehicle • Includes 20 ft. wiring harness and plug 99 8056122 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RUBBER GROMMET

WIRING PIGTAILS For single contact marker/clearance lamps. 8027752 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . Can be used with 4-1/2" stop/tail/turn lamps. 4212874 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1 209 99

• Can be used with 4-1/2" stop/tail/turn lamps • Can be used with 4" LED tail light 4212866 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

199

SLOW MOVING SIGNS REFLECTIVE FLUORESCENT RED and ORANGE

Measures: 14" high x 16" wide. E) PLASTIC 5040449 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METAL 5040079 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) ADHESIVE DECAL 5040170 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799 899 599

R A I L E R

& T O W I N G

2" CONSPICUITY TAPE

CONSPICUITY TAPE

3 YR. WARRANTY

G) HIGHLY REFLECTIVE CONSPICUITY TAPE

Improves visibility. 1-1/2" x 2 FT. ROLL Wt. 0.1 lbs.

5040128 – Red 5040125 – Red/silver . . . . . . . . . . . . . . . . . . . . . . 1-1/2" x 4 FT. ROLL Wt. 0.1 lbs.

5040199 – Red/silver . . . . . . . . . . . . . . . . . . . . . .

799/roll 999/roll

H) REFLECTIVE CONSPICUITY TAPE

1-1/2" x 40" roll. 5040132 – Silver 5040133 – Red 5040134 – Red/silver – Wt. 0.1 lbs. . . . . . . . . . .

499/roll

D) 1" x 24" REFLECTIVE SAFETY TAPE

5040151 – Fluorescent orange 5040152 – Fluorescent lime 5040153 – Silver – Wt. 0.1 lbs . . . . . . . . . . . . . . .

• Adhesive-backed for easy installation • Impact and solvent resistant • DOT and NHTSA approved • Mandatory on trailers 80" (2.032 m) or wider and 10,000 lbs. (4,536 kg) GVWR or heavier • Alternating 7" silver/11" red • Sold per foot 99 8005079 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . /ft.

CONSPICUITY STRIPS • 2" x 18" strips • 7" silver/11" red • Pkg. of 5 3810046 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

1999/pkg.

CONSPICUITY REFLECTORS 1" x 12" x 1/4" plastic stick-on reflectors. Wt. 0.1 lbs.

/roll

4210539 – Clear 4210540 – Red. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399/ea.

325

REFLECTORS

R A I L E R

• O’all dim.: 3" dia. • Lens gasket cushions and protects prisms against dirt 4216891 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

& T O W I N G

A) RED ALUMINUM REFLECTOR

399

B) ROUND CENTRE HOLE REFLECTORS Wt. 0.1 lbs.

O’all dim.: 3-1/4" dia. 8027798 – Red 8027814 – Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O’all dim.: 2-1/2" dia. 4212908 – Red 4212916 – Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

4219093 – Red 4219101 – Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129

• Rugged fiberglass/nylon housing • Epoxy sealed against dust, moisture, and vibration • 97 dB of sound, 60 pulses per min. • O’all dim.: 6" x 4" x 1-5/8" 99 4250031 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4299

INDICATING/WARNING LIGHTS Bussmann® Snap-mount into 1/2" dia. hole of mounting panel.

AUTOMOTIVE DOME LIGHT O’all dim.: 4"L x 2"W x 1"D. 8027823 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

Wt. 0.1 lbs. 4210735 – Red lens 4210736 – Blue lens 4210737 – Amber lens 4210738 – Green lens . . . . . . . . . . . . . . . . . . . . . . . . .

299

Bussmann®

D) SPST TOGGLE SWITCH

E) SPDT TOGGLE SWITCH

• Rated 16 amps @ 12 VDC • 2-position on-off • Black duckbill lever and dress ring 4210706 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Rated 16 amps @ 12 VDC • Black toggle and dress ring • 3-position on-off-on 4210703 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

249

299

D) SPST ILLUMINATED ON-OFF SWITCHES

F) SPST ILLUMINATED ON-OFF SWITCH

• Rated 20 amps @ 12 VDC • 2-position with illuminated lever; lights when on • Black dress ring

• Rated 20 amps @ 12 VDC • 2-position barrel lever type with red light emitting diode that lights when on • Brushed chrome lever and black dress ring 99 4210711 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

4210718 – Red 4210719 – Blue 4210721 – Amber 4210722 – Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G) TOGGLE SWITCH

399

E) TOGGLE SWITCH

• Rated 20 amps @ 12 VDC • Momentary on-off 4210702 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

E) SPST ILLUMINATED ON-OFF SWITCHES

• Rated 20 amps @ 12 VDC • 2-position, illuminated toggle that lights when on • Black dress ring Wt. 0.1 lbs.

326

O’all dim.: 4-7/16"L x 1-1/8"H.

BACK-UP ALARM

• 120 dB blast • 2 triple plated horns, 6" and 8-1/2" long • Air compressor operates on 12 VDC • Complete with universal relay, hardware, and instructions 8010341 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs

109

DUAL TRUMPET AIR HORN

SWITCHES

C) RECTANGULAR 2-HOLE REFLECTORS

4210707 – Red lens 4210708 – Blue lens . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

• Rated 25A @ 6-12 VDC • Metal housing and screw terminals • On-off 4210723 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

H) SPST ROCKER SWITCHES

• Rated 16 amps @ 12 VDC • Black body and bezel • 2-position, illuminated rocker that lights when on Wt. 0.1 lbs.

4210730 – Red lens 4210731 – Blue lens 4210732 – Amber lens 4210733 – Green lens . . . . . . . . . . . . . . . . . . . . . . . . .

399

3-SPEED FAN SWITCH

SWITCHES A) HEAVY DUTY TOGGLE SWITCH

• 20A @ 6 VDC, 10A @ 12 VDC • Metal housing, 2 screw terminals, metal lever 4219358 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

499

B) ON-OFF SWITCH

• 35A @ 6-12 VDC • Die-cast housing, silvered contacts, 2 copper screw terminals, chrome plated lever, and indicating plate 99 4219374 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

• Use to control the speed of heater fans • Mounts into a 1/2" hole 8003273 – Wt. 0.1 lbs. . . . . . . . .

1099

GAUGES 2" MECHANICAL CHROME GAUGES C) AMMETER GAUGE

60-0-60A. 4230062 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . C

799

D) WATER TEMPERATURE GAUGE

130°F to 280°F. 4230063 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1899

E) OIL PRESSURE GAUGE

0 to 80 PSI. 8028500 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . E

F) MECHANICAL/ELECTRICAL TRIPLE GAUGE Items C, D and E mounted in a chrome panel. 4230069 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

ELECTRICAL PANEL GAUGES

699

TACHOMETERS

R A I L E R

& T O W I N G

K) 4" TACHOMETER

• 0 to 7,000 RPM • OEM type illuminated needle • Works on conventional or distributorless ignition systems 4230081 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . J

• 2" dia. face plate with 90° sweep • Backlit for illumination at night • Can connect to dash light for brightness control • Mount on, in, or under dash • Complete illustrated instructions included G) 8-16 VOLT VOLTMETER 4230059 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 0 to 10,000 RPM • OEM type illuminated needle with shift light • Works on conventional or distributorless ignition systems 4230083 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

N) 2" TACHOMETER

6999

1999

J) MINI MECHANICAL /ELECTRICAL TRIPLE GAUGE

• Compact 1-1/2" dia. dial face • Includes mounting hardware 4230065 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3899

I) ELECTRIC WATER TEMP

100-250°F. 4230061 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 0 to 7,000 RPM • OEM type illuminated needle • Works on conventional or distributorless ignition systems 4230082 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . M) 4" TACHOMETER

H) ELECTRIC OIL PRESSURE

0-100 PSI. 4230060 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4299

L) 2-1/2" TACHOMETER

3499

• Range 0-8,000 RPM • Works on all 4, 6, and 8 cylinder engines • Can connect to dash light for brightness control • Mount on or under dash • Mounting hardware and complete illustrated instructions included • 270° sweep 99 4230064 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

327

T R A I L E R

& T O W I N G

FUEL GAUGE and SENDING UNIT

HOUR METER

A) FUEL LEVEL GAUGE

• 2-1/8" dia. case with light up dial • Includes mounting bracket and instructions 4230140 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

• 2" dial • Operates on 12 to 24 VDC • Fits 2" dia. mounting hole • Read to 9,999 hour plus 1/10 hour indicator 8042851 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3899

MECHANICAL OIL PRESSURE FITTING KIT

B) FUEL LEVEL SENDING UNIT

• For use with item 4230140 gauge • Fits fuel tanks from 5" to 23-1/2" deep • Complete mounting instructions included 4230157 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Includes: 1/8", 1/4" NPT adapters, and 72" nylon tubing. 4230075 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

499

BATTERY TOOLS BATTERY MASTER SWITCHES

Bussmann®

• Attach to negative battery post • 1/4 turn of knob disconnects battery, preventing drain • Remove knob completely to prevent theft • Rated: 100 amps continuous, 600 amps cranking • Included ATM-20 amp fuse can be installed for power bypass to equipment requiring continuous power, such as clocks, power locks, etc. C) For side post batteries. 4210831 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

19 999 99

D) For top post batteries. 4210962 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

E) BATTERY MASTER SWITCH

• Cuts power with simple turn of knob • Rated 12-24 volts 4219184 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

499 CIGARETTE PLUG ADAPTERS

BATTERY TERMINALS F

F) REPLACEMENT TERMINAL

For batteries without posts. 4270102 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

199/ea.

G) REPLACEMENT TERMINAL

For batteries with posts. 4270101 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

/ea.

328

Coiled cord extends to 10 ft. H) ADAPTER with BATTERY CLAMPS 4220011 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

I) ADAPTER

With cigarette lighter plug. 4220012 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

ADJUSTABLE BATTERY HOLD DOWN

Use as a replacement or to install an extra battery. 4210009 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

999

ANTI-CORROSION BATTERY WASHERS

499

• Place on the battery posts underneath the battery clamps to prevent corrosion • Pkg. of 2 4213062 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

99¢/pkg.

SOLAR PANELS 10 YEAR WARRANTY

B A C B) 5 WATT

• Reverse current protection • All panels come with discharge protection • Works under cloudy conditions • Weatherproof design • Anti-corrosion aluminum frame on 5W and 15W models • Includes battery clamps and wire • 10 year warranty A) 1 WATT

• Ideal for charging snowmobile, PWC, ATV, motorcycle, and other small capacity batteries • Switchable voltage can be used to charge small 3.6V batteries (i.e. cell phones, cam corders, digital cameras, etc.) • Helps ensure that expensive battery replacement is not required • Never overcharges 99 8002820 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TRUCK BED ACCESSORIES

• Ideal for batteries that are seldomly used or in storage • For use with antique cars, boats, RVs, cottages, deer feeders, farm equipment, electric fences and gate openers • Prevents deep cycle and larger 12V batteries from self-draining • Compensates for natural battery voltage losses and small electrical drains by sending a constant trickle of energy to the battery 99 8002819 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) 15 WATT

• Ideal for running lights, pumps, fans, small appliances in RVs, boats or cabins • Provides enough power to trickle charge a 12V vehicle or deep cycle battery • Weatherproof • Made with high impact tempered glass 99 8002876 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

184

BATTERY CHARGE CONTROLLER (Not Shown)

• Overcharge protection for 12V solar panel systems • Required only on panels 15W or higher • Includes status light indicator 99 8003059 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

R A I L E R

& T O W I N G

LOADING RAMPS

6 FT STEEL RAMP

• Capacity in pairs: 1,200 lbs. • Ramps measure: 12-1/4" x 72" • 4" spacing between braces to allow for easy loading of small tire lawn/garden tractors, snowblowers, ATVs • Includes cargo strap 4270107 – Wt. 49.1 lbs./pair . . . . . . . . . . . . . . . . .

14499

7 FT STEEL FOLDING RAMP

• Capacity in pairs: 1,200 lbs. • Ramps measure: 12-1/4" x 84" • Ramps fold in half for easy transportation • Ramps arch at the top to prevent lawnmower or snowblower decks from getting hung up 99 8006098 – Wt. 70.2 lbs./pair . . . . . . . . . . . . . . . . .

189

329

ALUMINUM RAMPS

R A I L E R

A) 2 PC RAMP

& T O W I N G

• Each ramp measures: 14-1/2" wide x 69" long • Capacity: 1,000 lbs. when used in pairs • 2 ramps can be joined together • Includes dual safety chains with hooks 4270074 – Wt. 24.1 lbs./pair . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ideal for loading ATVs, motorcycles, lawn/garden tractors, etc. 45"W x 69"L

• Capacity: 1,500 lbs. • Includes dual safety chains with hooks 4270033 – Wt. 27.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27999

54"W x 77"L

• Capacity: 1,500 lbs. • Welded rungs • Includes adjustable attachment strap 4270034 – Wt. 36.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29999

LOADING RAMP PLATE

STEEL TRUCK BOX with DRAWERS

• Mounting holes 6" centres • To be used with 7 ft. long 2" x 8" planks with carriage bolts and nuts (not included) • O’all dim.: 7-1/2" x 10-1/2" • 350 lb. capacity • 3/16" polished aluminum deck plate 99 8021393 – Wt 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . • 750 lb. capacity • 1/4" polished aluminum deck plate 99 8005828 – Wt 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

• 17-gauge steel construction • 2 drawers and locking mechanism • O’all dim.: 18" x 18" x 36" 8002067 – Wt. 132.3 . . . . . . . . . . . . . . . . . . . . . .

12 19

FACTORS CONTRIBUTING TO TRAILER SEPARATION:

330

21999

B) TRIFOLD RAMP

1. Failure to close coupler - The operator forgets to close the coupler securely on the ball. Often after separation of the trailer from the vehicle, the coupler is bumped closed and it appears as though the coupler has been closed all along. 2. Improper or poorly installed equipment- Wrong size or type of ball - A ball that is too small can pull out of the coupler. A ball with the wrong shape can prevent the coupler from closing properly. A ball which is short in overall height can transmit extremely high forces into the coupler while riding over uneven ground because the coupler is not allowed to move freely on the ball without binding. 3. Wrong hitch - The use of a Weight Carrying Hitch (WCH) instead of a Weight Distributing Hitch (WDH) with trailers which are Class 2 or greater, can place too much tongue load on the rear end of the vehicle. This can cause the rear end of the towing vehicle to sag downward and the forward end to be raised upward, causing steering problems and towing vehicle sway at other than slow speeds. After the coupler has separated from the ball, further separation can result if: 1. There are not safety chains. 2. Safety chains are of inadequate strength or improperly installed. 3. Safety chains are improperly hooked up. 4. There are no brakes on the trailer. 5. There is no emergency breakaway brake system to control the trailer after it has separated. 6. The emergency breakaway system is inoperable. (Example: No auxiliary battery on the trailer to energize the brakes)

29999

UNDERBODY BOXES • 14-gauge steel construction with 12-gauge steel door, black powder coat finish • Flush mount beveled door to shed water away from opening, aircraft cable-style door checks • Stainless steel continuous hinge Size 18" x 18" x 36" 18" x 18" x 48"

1,000 LB TRUCK MOUNT CRANE

Wt. (lbs.) 95.0 122.0

ITEM 4280035 4280036

PRICE 389.99 449.99

BUILT BY PRINCESS AUTO

• Ideal for lifting/moving heavy items onto trucks and lowbeds • Complete with hand winch and 25 ft. cable • 4 individual positions: Pos. 1 - 50.5" 2 - 64" 3 - 76" 4 - 86.5" • Boom 4 ft. 1-3/4" (1.26 m) long • 360° rotation with manual brace • Boom stows easily for traveling 1580015 – Wt. 140.0 lbs. . . . . . . . . . . . . . . . . . . .

62499

AUXILIARY HEATERS

These heaters will provide extra heat for cars, trucks, vans and other vehicles by distributing the heat from the water system with a 12 volt fan. Type Max. BTU/hr. A 3,425 B 8,700 C 13,500 D 18,500 E 21,000 F 24,700 G 36,000

CFM Speed 60 1 130 1 185 3 175 3 265 3 295 3 400 3

O’all Dim. 5-1/4"H x 7-1/4"W x 3-1/2"D 3-1/2"H x 12"W x 8-1/2"D 7-1/4"H x 7-1/4"W x 7-1/4"D 11-1/2"H x 9-7/8"W x 4-1/2"D 8-3/5"H x 8-1/4"W x 8-1/8"D 8"H x 17"W x 5-1/4"D 6-1/4"H x 15-1/2"W x 9-5/8"D

MAGNETIC HEATERS

Wt. (lbs.) 2.8 5.2 8.6 11.0 11.0 9.7 16.4

ITEM 4240007 4240009 4240003 4240005 4240004 4240028 4240006

PRICE 99.99 214.99 169.99 209.99 184.99 199.99 239.99

HEATER HOSE

I H • Provides heat when and where you need it. Ideal for engine blocks, oil pans, transmissions, differentials, radiators, hydraulic cylinders, pumps and valves, locks, drains or pipes • 120 VAC

R A I L E R

& T O W I N G

H) 200 WATT 400°F (204°C)

O’all dim. 6-1/2" x 2-1/4" x 2". 4270099 – Wt. 1.1 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999

I) 300 WATT 300°F (149°C)

O’all dim. 7" x 5" x 2". 4270100 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5499

I.D. 1/2" 5/8" 3/4"

Wt. (lbs.) ITEM PRICE 0.2/ft. 4240206 0.89/ft. 0.2/ft. 4240222 0.99/ft. 0.2/ft. 4240255 1.09/ft.

WINCHES HAND WINCHES Load Gear Reel Ratchet Cap. Ratio Cap. Type* J 600 3.1:1 36 ft. x 1/4" 1-way J 900 3.1:1 36 ft. x 1/4" 1-way K 1,200 4.1:1 120 ft. x 3/16" 1-way K 1,400 4.1:1 120 ft. x 3/16" 2-way K 1,700 5.1:1 120 ft. x 1/4" 2-way K 1,900 5.1:1 120 ft. x 1/4" 2-way * Free spool in off position

Wt. ITEM (lbs.) 4.6 8006868 4.7 8006878 5.6 1510148 6.8 1510304 9.2 1510312 9.8 1510320

PRICE 36.99 38.99 39.99 48.99 54.99 59.99

REPLACEMENT HANDLES

For 1,200 & 1,400 lb. winch. 1540319 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.99

331

T R A I L E R

& T O W I N G

2-SPEED HAND WINCHES

• No more lost handles; change speed (gear ratios) without removing the handle • Simply press locking lever and shift handle from side to side to change gears or free spool (handle will not spin in free spool position) • All models have a hand brake Cap. (lbs.) Gear Ratios Reel Cap. Wt. (lbs.) ITEM PRICE 2,800 5.1:1 & 14.7:1 94 ft. x 1/4", 62 ft. x 5/16" 17.1 1510270 119.99 3,200 5.1:1 & 14.7:1 94 ft. x 1/4", 62 ft. x 5/16" 18.2 1510163 129.99

AUTOMATIC BRAKE HAND WINCHES • These winches feature self-activating automatic brake systems • Positive holding action of the brake system while raising and lowering loads provide the needed control for safety Load Capacity Gear Ratio Cable Size Wt. (lbs.) ITEM 1,000 lbs. 4.1:1 7/32" x 65 ft. 9.2 1510030 1,500 lbs 5.1:1 1/4" x 88 ft. 13.2 1510080

PRICE 91.99 119.99

3,700 LB HAND WINCH • 2-speed winch quickly changes speed by just lifting lock and moving shaft into the desired position • 5.1:1 and 12.2:1 gear ratio • FREEWHEELING without a spinning handle makes for safer operation • Holds 185 ft. of 7/32" steel cable • 1-3/4" hub size 99 1510361 – Wt. 22.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

229

HAND WINCHES A) 1,400 LB HAND WINCH

• Includes forged hook and 20 ft. nylon strap • Ideal boat winch 1510002 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5999

B) 400 LB HAND RATCHET WINCH

• Specially designed for mounting on flat decks • Ideal for applications where handle cannot be turned 360° • Reel capacity: 70 ft. x 3/16" or 40 ft. x 1/4" • Drum is 2" wide x 4-1/2" dia. 99 1510005 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2,000 LB WORM GEAR WINCH

332

WINCH CABLE with HOOK

• 41:1 gear ratio • 2,000 lb. capacity • Self-braking for applications requiring a positive mechanism • Handles up to 25 ft. of 5/16" cable • Load will remain in place when handle is released • Heat treated alloy steel worm gears • Thrust bearings reduce friction and provide longer winch life • Reel capacity: 140 ft. x 1/8", 64 ft. x 3/16", 34 ft. x 1/4" 99 1510155 – Wt. 9.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3/16" WINCH CABLE

• Breaking strength: 4,000 lbs. • Safe working load: 2,000 lbs. 25 ft. 3820028 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 50 ft. 3820029 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 100 ft. 3820030 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1299 1899 2399

50 ft. x 1/4" WINCH CABLE

• Breaking strength: 6,900 lbs. • Safe working load: 3,450 lbs. 3820033 – Wt. 5.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

12 VOLT WINCH

2,700 LB CAPACITY 120 VAC ELECTRIC WINCH

R A I L E R

MODEL M8000

• Rated line pull: 8,000 lbs. • 4.8 HP series wound motor • 3-stage planetary gear train, 216:1 gear ratio • Comes complete with 12 ft. long remote control, Hawse fairlead, and 80 ft. x 5/16" wire rope • 42 FPM line speed @ (0 load @ first layer of drum) • Sliding ring gear clutch (free spool) • Automatic in-drum brake • O’all dim.: 21.0"L x 6.3"W x 7.6"H 99 1530724 – Wt. 72.5 lbs. . . . . . . . . . . . . . . . . . .

1199

• Power in, power out, plus freewheel out • Cable speed, no load: 16 FPM full reel; 7 FPM empty reel • 584:1 gear ratio • Comes with 25 ft. of 7/32" cable • Ideal for boat house use 1530070 – Wt. 30.3 lbs. . . . . . . . . . . . . . . . . . . . .

59999

2,000 LB 12 VDC WINCH • 0.9 HOP motor • 10.5 FPM line speed @ no load • 153:1 gear ratio • Includes remote control with 6 ft. cord • 49 ft. x 5/32" wire rope 8008185 –Wt. 16.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

22999

8,000 LB SELF RECOVERY WINCH

WINCH INSTALLATION STAND

Use to mount fairlead to winch (not required for bumper-mounted fairlead) 8046848 – Wt. 24.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

4999

• Rated line pull: 8,000 lbs. (3,628 kg.) • 1.8 HOP 12 VDC permanent magnetic motor • 210:1 gear ratio • Freespooling clutch • Static braking • 2-1/2" x 9" drum • Remote switch with 82" (2.5 m) lead • 5/16" x 95 ft. wire rope • Line speed: 13 FPM @ 0 lbs., 11 FPM @ 2,000 lbs., 6 FPM @ 6,000 lbs. • O’all dim.: 21" x 7.1" x 6.9" 8008194 –Wt. 70.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

& T O W I N G

69999

WINCH STRAPS B

Size A B A B C D E E E

2" x 15 ft. 2" x 15 ft. 2" x 25 ft. 2" x 25 ft. 2" x 20 ft. 2" x 27 ft. 2" x 30 ft. 3" x 30 ft. 4" x 30 ft.

Hook Safe Breaking Style Working Load Strength Flat 1,100 lbs. 3,300 lbs. Cast 1,100 lbs. 3,300 lbs. Flat 1,100 lbs. 3,300 lbs. Cast 1,100 lbs. 3,300 lbs. Cast 3,300 lbs. 10,000 lbs. Double J Hook 1,650 lbs. 5,000 lbs. Flat Hook 3,300 lbs. 10,000 lbs. Flat Hook 5,000 lbs. 15,000 lbs. Flat Hook 6,000 lbs. 18,000 lbs.

Wt. (lbs.) 0.9 1.1 1.5 1.3 2.3 1.6 2.6 3.8 5.0

ITEM

PRICE

3800300 3800302 3800298 3800301 3800303 8020624 8020303 8020312 8020330

12.99 12.99 14.99 14.99 23.99 19.99 23.99 26.99 29.99

333

12 VOLT WINCHES by

T R A I L E R

& T O W I N G

T SERIES IDEAL FOR ANY APPLICATION WHERE A REMOTE SWITCH IS REQUIRED. • Circuit breaker protected • Mechanical and dynamic brake • Freewheel • Powers load in and out • Includes dash mount remote kit and switch Model Rated Line Motor No Load Cable No Load O’all Dim. Pull (lbs.) (HP) Draw (dia. x l) Line Speed (L x D x H) T1500 1,500 0.71 8 amp 5/32" x 25 ft. 14.5 FPM 12.5" x 3.9" x 4.1" T2000 2,000 0.71 8 amp 5/32" x 50 ft. 14.5 FPM 12.5" x 3.9" x 4.1"

Wt. ITEM PRICE (lbs.) 13.8 1530007 209.99 14.1 8002847 279.99

ATV SERIES • Circuit breaker protected • Mechanical and dynamic brake • Powers load in and out • Handle bar mountable low amp switch • Solenoid type relays sealed against the elements • Freewheel • Cable tension plate avoids loose wire rope spool • 50 ft. wire rope with latch hook • 3,000 model comes with roller fairlead Model

Rated Line Motor No Load Cable No Load O’all Dim. Wt. ITEM PRICE Pull (lbs.) (HP) Draw (dia. x l) Line Speed (L x D x H) (lbs.) ATV1800 1,800 0.71 8 amp 5/32" x 50 ft. 15.5 FPM 12.5" x 3.9" x 4.1" 19.0 8002855 329.99 ATV3000 3,000 1.1 15 amp 3/16" x 50 ft. 14.5 FPM 12.3" x 4.36" x 4.5" 26.1 8002852 429.99

GP SERIES

A PULLEY BLOCK doubles the capacity

• Circuit breaker protected of any winch • Mechanical and dynamic brake • Powers load in and out • Solenoid type relays sealed against the elements • 15 ft. handheld remote • Freewheel • Cable tension plate avoids loose wire rope spool • 50 ft. wire rope with latch hook • Includes roller fairlead and pulley block Model

Rated Line Motor No Load Cable No Load O’all Dim. Wt. ITEM PRICE Pull (lbs.) (HP) Draw (dia. x l) Line Speed (L x D x H) (lbs.) GP3000 3,000 1.1 15 amp 3/16" x 50 ft. 12 FPM 12.7" x 4.36" x 4.5" 25.7 8002863 479.99

S SERIES • Circuit breaker protected • Mechanical and dynamic brake • Roller fairlead • Powers load in and out • Heavy duty handheld 30 ft. remote switch • Solenoid type relays sealed against the elements • All weather motor and integrated solenoid cover • Transparent hinged wire rope guard • Freewheel • Cable tension plate avoids loose wire rope spool • Includes wire rope and latch hook Model

334

S4000 S5000

Rated Line Motor No Load Cable No Load Pull (lbs.) (HOP) Draw (dia. x l) Line Speed 4,000 1.8 30 amp 7/32" x 60 ft. 32 FPM 5,000 2.1 36 amp 1/4" x 50 ft. 31 FPM

A PULLEY BLOCK doubles the capacity of any winch

O’all Dim. Wt. ITEM PRICE (L x D x H) (lbs.) 15.1" x 8.7" x 6" 34.7 8002705 649.99 15.1" x 8.7" x 6" 38.1 8002940 749.99

12 VOLT WINCHES by

EPi SERIES

A PULLEY BLOCK doubles the capacity

• Circuit breaker protected of any winch • Mechanical and dynamic brake • Powers load in and out • Integrated sealed contactors • Efficient all metal 3 stage planetary gearbox • 15 ft. handheld remote • Freewheel • 125 ft. wire rope with thimble and latch hook • Includes roller fairlead and pulley block Model Rated Line Motor No Load Cable No Load O’all Dim. Wt. ITEM PRICE Pull (lbs.) (HP) Draw (dia. x l) Line Speed (L x D x H) (lbs.) EPi 9,000 4.6 33 amp 21/64" x 125 ft. 47.1 FPM 23.35" x 6.26" x 7.13" 114.5 8004616 999.99

120 VAC SERIES 5:1 Safety Factor

• Operates on standard house current • Circuit breaker protected • Mechanical and dynamic brake • Powers load in and out • 6 ft. handheld remote • Cable tension plate avoids loose wire rope spool REVERSING SWITCH for 1530997 0701441 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Model Rated Line Pull (lbs.) AC1000 1,000 SAC1000 1,000

54.99

Motor No Load Cable (HP) Draw (dia. x l) 0.6 3 amp 5/32" x 45 ft. 0.6 4.3 amp 3/16" x 50 ft.

No Load O’all Dim. Line Speed (L x D x H) 23 FPM 13.38" x 5.38" x 5.69" 13.8 FPM 15.3" x 5.9" x 6"

Wt. ITEM PRICE (lbs.) 19.3 1530997 569.99 26.5 1530044 679.99

R A I L E R

& T O W I N G

8,000 LB HIGH SPEED HYDRAULIC PLANETARY WINCH Ideal for continuous duty!

MODEL H8P, P/N 5050A

• 8,000 lb. capacity • High speed all steel planetary gear train: 35 ft./min • Continuous duty rated • Can be rail or foot mounted • Rated at 2,200 PSI and 15 GPM • High torque SAE 2-bolt flange motor • Meets SAE J-706 standards • Brake is 50% of load holding • Compatible with closed centre valve system • Large cap. drum holds 113 ft. of 3/8" wire rope • O’all dim.: 22-3/4" x 8-1/4" x 9" 1550007 – Wt. 77.8 lbs. (less wire rope) . . . . . . . .

169999

Shown with optional rope and fairlead

WIRELESS WINCH REMOTE • Instant power on and off control with no delay • Power your winch up to 150 ft. away • Sealed tough and tight for all conditions • Compact durable antenna • Plug and play type components for easy installation • Comes complete with 2 remote transmitters plus handlebar mountable switch, wiring and mounting hardware 8002919 –Wt. 4.1 lbs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26999

335

T R A I L E R

& T O W I N G

CARGO WINCHES

A) to C)

• Breaking strength: 15,000 lbs., safe working load: 5,000 lbs. • For use with 2", 3", or 4" webbing • Meets requirements of DOT, CHP, Canadian and proposed North American Cargo Securement Standards, and WSTDA A) LOW PROFILE 15,000 LB WELD-ON CARGO WINCH 8045297 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) 15,000 LB WELD ON CARGO WINCH 8020198 – Wt. 9.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C)15,000 LB PORTABLE CARGO WINCH 8020223 – Wt. 12.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

D) 10,000 LB LASHING CARGO WINCH

• Safe working load: 3,335 lbs. • Can be welded or bolted in place but has the quick release and operation of a ratchet 99 8020205 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

24 2499 2799 99

E) CHROME CARGO WINCH BAR

• Knurled, no-slip handle with carbon-steel nosepiece • Designed to tighten loadbinders 99 8045448 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) 5,000 LB 2" MINI CARGO WINCH 8020615 –Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

21 1499

ACCESSORIES

ROLLER FAIRLEADS

2,000 LB ROLLER FAIRLEAD 8002721 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 2,000 LB CHROME ROLLER FAIRLEAD 8005299 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 5,000 LB ROLLER FAIRLEAD 8005300 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4499 4999 6499 8,000 LB ROLLER FAIRLEAD 99 8001393 – Wt. 9.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 84 10,000 LB ROLLER FAIRLEAD 99 8005301 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . 99

G) 8,000 LB PULLEY BLOCK

Doubles pulling capacity of any winch. 3800047 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

H) 10,000 LB TOW HOOK

Includes mounting bolts and safety catch. Wt. 2.1 lbs. 8002275 – CHROME . . . . . . . . . . . . . . . . . . . . . . . .

MISSING

8002273 – BLACK

1299 99 . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Have you seen this child?

Joseph Andrews Date of Birth: February 22, 1992 Height: 4 ft. 9" Weight: 65 lbs. Hair Colour: Black Eye Colour: Brown Missing From: Salmon Valley, British Columbia Missing Since: August 4, 2002

1-800-387-7962 336

to report on a missing child anywhere in Canada

All calls confidential - No name required. A missing child is everyone's responsibility.

TOW ROPES & STRAPS

POLYPROPYLENE ROPE

10,000 LB NYLON STRAP • 2" wide strap • 20 ft. long 1740001 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

TOW STRAPS with HOOKS Dia. Length Capacity Wt. (lbs.) ITEM PRICE 3/4" 14 ft. 8,500 lbs. 2.8 8020429 17.99 Polyester strap with forged alloy steel hooks Size Capacity Wt. (lbs.) ITEM PRICE 2" x 15 ft. 5,000 lbs. 1.7 8021428 17.99 2" x 15 ft. 8,500 lbs. 2.0 8021785 24.99

TOW STRAP Dia. 5/8" 5/8" 7/8"

Length 15 ft. 20 ft. 20 ft.

Capacity Wt. (lbs.) 3,500 lbs. 1.5 3,500 lbs. 1.7 6,000 lbs. 1.7

ITEM 1740281 1740703 1740711

PRICE 11.99 15.99 17.99

9999

GRADE 70 TOW CHAIN with GRAB HOOKS

• Designed to protect trees during self recovery and towing • 5,000 lb. safe working load, 15,000 lb. breaking strength • 4" wide x 6 ft. long 8021419 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TREE SAVER WINCH STRAP

6999

3/8" x 15 FT.

5499

5/16" x 20 FT.

• Breaking strength: 9,400 lbs. • Safe working load: 4,700 lbs. 3800085 – Wt. 24.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

899

4499

3/8" x 20 FT.

• Breaking strength: 13,200 lbs. • Safe working load: 6,600 lbs. 8004684 – Wt. 21.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

O W I N G

NYLON RECOVERY STRAPS

5/16" x 15 FT.

• Breaking strength: 13,200 lbs. • Safe working load: 6,600 lbs. 3800084 – Wt. 28.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

& T

1999

• Designed to protect trees during self recovery • 3,000 lb. safe working load • 2" x 6 ft. long. 8016620 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Breaking strength: 9,400 lbs. • Safe working load: 4,700 lbs. 8004683 – Wt. 16.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TREE/TOW STRAP

18,000 LB TOW STRAP with CHAINS

3" x 25 ft. long strap 8020982 – Wt. 11.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• 2 forged steel grab hooks • 2,600 lb. safe working load, 8,000 lb. breaking strength • 1-3/4" wide x 15 ft. long 8002111 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

R A I L E R

5999

• White nylon strap material • Reinforced inserts sewn into loops to reduce wear and abrasion Length Capacity Wt. (lbs.) ITEM PRICE 1" x 15 ft. 7,500 lbs. 1.1 8020946 22.99 2" x 20 ft. 18,000 lbs. 2.5 8020973 41.99 2" x 30 ft. 18,000 lbs. 3.5 8021847 49.99 3" x 20 ft. 27,000 lbs. 3.9 8021026 56.99 3" x 30 ft. 27,000 lbs. 5.4 8021865 76.99 4" x 30 ft. 35,000 lbs. 8.0 8021874 94.99 6" x 30 ft. 55,000 lbs. 11.3 8021892 149.99

337

T R A I L E R

TIE DOWNS & RATCHET COMPONENTS TIE-DOWN RINGS A Style A B C D

Capacity 1,200 lbs. 1,200 lbs. 5,000 lbs. 11,000 lbs.

Opening Width 1" 1-5/8" 1-3/8" 2-1/4"

TRUCK TIE-DOWN ANCHORS

& T O W I N G

Wt. (lbs.) 0.1 0.3 1.3 1.0

C ITEM 8021598 8021614 8021632 8021623

D PRICE 2.99/ea. 3.99/ea. 9.99/ea. 7.99/ea.

1/2" REMOVABLE ANCHOR POINT • Moves along pickup bed to desired location • Attaches to tie-downs • Vinyl coated 8020722 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Pair of chrome eyehooks with rubber base • Fits easily into truck stake pockets • No tools required 4200121 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . .

699

STAKE POCKET ANCHOR

1499/pr.

2,000 LB ANCHOR RING with PLATE

299

RECESSED TIE DOWN RING

• Cap.: 1,200 lbs. • Opening: 1-7/8" • O’all dim.: 5" x 3-1/2" 3809761 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

CHROME TOGGLE

Designed for '97 and newer Ford, Dodge, and Chevy full size trucks with larger pocket holes. 8020535 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

799/ea.

2 PC FOLD-AWAY CLEATS

Black powder coat finish. 8020937 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

338

O’all Dim. 2-3/4" x 1-1/2" 4" x 4" 4-1/2" x 4-7/8" 3-1/4" x 4-1/2"

• Secure cargo on trucks, campers, RVs, boats, and trailers • Cleat folds down when not in use • Chrome plated • Mounting plate measures: 3-3/4" x 2-1/4" x 1/2" • Safe working load: 2,000 lbs. each 99 3800126 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . /ea.

1,200 LB ANCHOR RING

399/ea.

Stainless steel. 8020759 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1,200 LB ANCHOR RING

WINDSHIELD WASHER KIT

• Heavy steel construction, zinc plated • 1-3/4" openings • O'all dim.: 5-3/4" x 4" 8020811 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• 12 volt • Push button dash switch • Includes wiring, nozzles, tubing, mounting bracket and instructions 2990321 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

599

299

1499

CAR TIE DOWN STRAP • 2" x 7 ft. • Safe working load: 1,650 lbs. • Breaking strength: 5,000 lbs. 8020679 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

LIGHT DUTY STRAP

• 1" x 6 ft. • General purpose propylene straps 8020660 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

2699 RATCHET STRAP

MOTORCYCLE TIE DOWN

• 1" x 6 ft. • Safe working load: 250 lbs. • Breaking strength: 750 lbs. 8020633 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699

• 1" x 15 ft. • Safe working load: 1,000 lb. • Breaking strength: 3,000 lb. 8020553 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

& T

ROPE RATCHETS

MOTORCYCLE TIE DOWN STRAP • 1" x 6 ft. • Includes security lock buckle • Safe working load: 400 lbs. • Breaking strength: 1,200 lbs. 8020651 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• 3/8" x 8 ft. • Safe working load: 75 lbs. • Breaking strength: 250 lbs. 8020580 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1699

899 AXLE

STRAPS

TIRE STRAP ASSEMBLY and COMPONENTS

8020704 – 2" x 24" Safe working load: 1,650 lbs. Breaking strength: 5,000 lb. Welded wire rings Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8020697 – 2" x 24". Safe working load: 3,300 lbs. Breaking strength: 10,000 lb. Flat stamped "V" ring Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

R A I L E R

699

O W I N G

899

CARGO BAR B C

• Adjusts from 40" to 69" • Industrial threaded plug • Black rubber pads 4200189 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1599

SPARE TIRE CARRIER • Universal fit, adjustable tire strap • Inludes ratchet with safety snap hook, 2" buckle, 2" double “J” hook • Safe working load: 3,300 lbs. • Breaking strength: 10,000 lbs. 8005421 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . TIRE STRAP COMPONENTS A) TIRE STRAP with FLAT HOOK 8005423 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) RATCHET 8021703 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) STRAP with FLAT HOOK

EASY TO INSTALL

5999 3499 2499

2" x 18" 8021810 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

799

• Bolts tires to trailer tongue • Fits 8", 9", 12", 13", 14", and 15" wheels with 4 or 5-hole rims • Zinc plated 99 8007005 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

339

T R A I L E R

& T O W I N G

RUBBER SAFETY HOOKS

Length 4-7/8" 6" 7-7/8" 4-1/2"

A B C D

4 PC CAM STRAPS

Wt. (lbs.) 0.3 0.4 0.5 0.5

ITEM 4200358 4200366 4200374 4200165

PRICE 7.99 8.99 10.99 8.99/pr.

4 PC RATCHET STRAPS

• Length: 15 ft. • Breaking strength: 1,500 lbs. • Safe working load: 500 lbs. • Ratchet lock holds straps tight and secure 8016675 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2199

• Quick and easy thumb release • 1" wide x 6 ft. long nylon webbing • Cam lock holds straps tight and secure Breaking Safe Working Wt. ITEM PRICE Strength Load (lbs.) 750 lbs. 250 lbs. 3.0 8020492 18.99 1,000 lbs 300 lbs. 3.9 8022622 25.99

4 PC CAM STRAPS

• Quick and easy thumb release • 1" wide x 6 ft. long nylon webbing • Breaking strength: 1,000 lbs. • Safe working load: 300 lbs. • Cam lock holds straps tight and secure 8017497 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1799

TIE-DOWN STRAP ASSEMBLIES

Style E E F G H I

Length 15 ft. 15 ft. 15 ft. 25 ft. 27 ft. 30 ft.

Width 1" 1" 2" 2" 2" 2"

Safe Working Load 165 lbs. 400 lbs. 1,650 lbs. 1,650 lbs. 3,300 lbs. 3,300 lbs.

Breaking Strength 500 lbs. 1,200 lbs. 5,000 lbs. 5,000 lbs. 10,000 lbs. 10,000 lbs.

Wt. (lbs.) 0.9 1.2 3.4 3.9 5.1 5.8

ITEM 8021464 8021455 8020170 8021473 8022560 8021534

PRICE 9.99 17.99 26.99 31.99 35.99 44.99

TIE-DOWN STRAPS

J Style

340

Length

Safe Working Load J Cam Lock with Hooks 5 ft. N/R* J Cam Lock with Hooks 15 ft. 250 lbs. K Strap with Cam Lock 10 ft. N/R* *N/R - Not Rated: Light Duty Applications ONLY!

Breaking Strength N/R* 750 lbs. N/R*

K Wt. (lbs.) 0.2 1.0 0.2

ITEM

PRICE

8021482 8021437 8021491

4.99 10.99 4.99

RATCHET STRAPS A

Style

Length

Width

A B C

15 ft. 15 ft. 27 ft.

1" 1-1/2" 2"

Safe Working Load 400 lbs. 2,000 lbs. 3,300 lbs.

Breaking Strength 1,200 lbs. 6,000 lbs. 10,000 lbs.

Wt. (lbs.) 1.1 2.9 6.8

ITEM

PRICE

8002102 8016639 8016648

9.99 21.99 29.99

RATCHET STRAP COMPONENTS

D D D E F G G G H

Type Ratchet Ratchet Cam buckle Rubber coated hook “J” Hook “J” Hook “J” Hook Flat Hook

Strap Size Safe Working Load 1" 330 lbs. 1" 1,000 lbs. 1" 330 lbs. 1" 250 lbs. 1" 1,000 lbs. 2" 1,600 lbs. 2" 3,300 lbs. 2" 3,300 lbs.

Breaking Strength Wt. (lbs.) 1,000 lbs. 0.5 3,000 lbs. 0.7 1,000 lbs. 0.3 750 lbs. 0.2 3,000 lbs. 0.2 5,000 lbs. 0.4 10,000 lbs. 0.6 10,000 lbs. 0.7

H ITEM PRICE 8021678 5.99 8021650 9.99 8021687 3.99 8021696 2.49 8021767 2.99 8021730 3.49 8021749 4.49 8021712 4.49

5,000 LB RATCHET and STRAP COMPONENTS J

R A I L E R

& T O W I N G

I • Safe working load: 1,650 lbs. • Breaking strength: 5,000 lbs. • Straps are 2" wide I) RATCHET

Match ratchet I with strap J shown in chart 8021721 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . .

Style

/ea.

J “J” Hooks J “J” Hooks

Length Wt. (lbs.) ITEM PRICE 15 ft. 1.5 8021918 13.99 25 ft. 1.9 8021927 18.99

10,000 LB RATCHET and STRAP COMPONENTS L K

• Safe working load: 3,300 lbs. • Breaking strength: 10,000 lbs. • Straps are 2" wide Match ratchet K with strap L or M as shown in chart K) RATCHET 8021703 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . L L M M

Style Length Wt. (lbs.) “J” Hooks 20 ft. 3.0 “J” Hooks 30 ft. 3.6 Flat Hooks 20 ft. 2.8 Flat Hooks 30 ft. 3.3

2499/ea.

ITEM 8021829 8021838 8021794 8021801

PRICE 21.99 25.99 21.99 25.99

341

T R A I L E R

& T O W I N G

ATV ACCESSORIES ATV DUST COVER

DELUXE ATV FENDER BAG

• Can be mounted on either front or rear fender • Mounts easily to rack and includes hooks to secure under fender • Includes two zippered compartments and insulated bottle holder with drawstring 8006412 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

3499

ATV FENDER BAG

• 142" x 48-3/4" • Ideal for storage • Lightweight, durable non-abraisive fabric • Water repellent • Breathable-allows heat and moisture to escape • 100% polyester - will not freeze or stretch • Resistant to rot and mildew • Double stitched construction • Storage bag included 8006920 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

HELMET BAG

• Universal fit • Attaches with velcro straps for quick easy installation • 2 zippered compartments 8006501 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1599

• Carry handles • Water resistant nylon • Lined to prevent marking of helmet 8012679 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1999

ATV HANDLE BAR BRUSH GUARD

ATV GAS CAN HOLDER

• Universal fit for easy installation • Mounts to rack or accessory rack extension • Fits 2 gallon or 10 litre gas can 8005849 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Universal mount fits most ATV's • Steel construction protects hands while riding 8005848 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . .

MISSING 3499

2499/pr.

Have you seen this child?

Tania Murrell Date of Birth: June 20, 1976 Hair Colour: Sandy Blonde Eye Colour: Brown Missing From: Edmonton, Alberta Missing Since: Janaury 20, 1983

Age Enhanced Photo 19 years (2002)

1-800-387-7962 342

to report on a missing child anywhere in Canada

All calls confidential - No name required. A missing child is everyone's responsibility.

CASTERS

GENERAL DUTY CASTERS • A combination of strength, durability, and economy • Hard rubber wheel SWIVEL CASTER

Wheel Size

Load O’all Cap. Ht. 2" x 1" 90 lbs. 2-1/2" 2-1/2" x 1-1/8" 100 lbs. 3-1/4" Above caster with side brake 3" x 1-1/4" 270 lbs. 3-13/16" 4" x 1-5/8" 350 lbs. 5"

Wt. (lbs.) 0.4 0.9 1.0 1.3 2.6

RIGID CASTER

ITEM PRICE (ea.) 8001840 4.99 2040008 6.99 8037144 8.99 8037153 8.99 8037171 16.99

Wt. ITEM (lbs.) 0.3 2041127 0.7 2041143 – – 1.1 8037162 2.2 8037180

WHEEL ONLY

PRICE BORE Wt. ITEM PRICE (ea.) (lbs.) (ea.) 3.99 – – – – 5.99 – – – – – – – – – 8.49 3/8" 0.5 2040061 3.99 6.99 7/16" 2.2 8006683 6.99

LIGHT/MEDIUM DUTY CASTERS • Use with dollies, trucks, bakery racks, portable files, tool boxes, display racks, and many other light uses • Double ball bearing raceway, self-lubricating bearing • Corrosion resistant zinc finish SWIVEL CASTER

Wheel Size 3" x 13/16" 4" x 15/16" 4" x 1-1/4"

Load Cap. 90 lbs. 115 lbs. 200 lbs.

O’all Ht. 3-3/4" 4-13/16" 5"

Wt. (lbs.) 1.0 1.4 1.8

ITEM 8037199 8037215 2041150

RIGID CASTER

PRICE 7.99 9.99 11.99

Wt. (lbs.) 0.5 1.5 1.1

ITEM 8037206 8037224 2041168

PRICE 6.99 7.99 9.99

MEDIUM/HEAVY DUTY CASTERS • Use with trash containers, stock carts, wire shelving, and other medium/heavy use • Corrosion resistant grey metallic finish • Double ball bearing raceway, roller bearing SWIVEL CASTER

Wheel Load O’all Wt. ITEM PRICE Size Cap. Ht. (lbs.) (ea.) 5" x 2" 900 lbs. 6-1/2" 4.5 8005900 27.99 6" x 2" 900 lbs. 7-1/4" 4.9 8005898 28.99

RIGID CASTER

WHEEL ONLY

Wt. ITEM PRICE BORE Wt. ITEM PRICE (lbs.) (ea.) (lbs.) (ea.) 3.7 2040189 22.99 3/4" 1.1 8005903 9.99 4.0 2040187 24.99 3/4" 1.5 8005901 11.99

R A I L E R

& T O W I N G

DYNA-TRED CASTERS • Unique thermoplastic rubber construction resists chemicals, caustics, oils, acids, and wear • Rugged polypropylene hub won’t dent, mar, fade, or stain • Ideal for shops, showrooms, sales floors, and hospitals • Non-marking, soft cushioned wheels SWIVEL CASTER

Wheel Load O’all Ht. Size Cap. 3-1/2" 180 lbs. 4-3/4" 4" 200 lbs. 5" 5" 225 lbs. 6"

Wt. ITEM (lbs.) 1.6 2040009 1.7 2040010 1.9 2040011

CASTER with BRAKE

PRICE Wt. ITEM (ea.) (lbs.) 14.99 1.7 2040426 15.99 1.8 8005917 17.99 2.1 8005888

RIGID CASTER

PRICE Wt. ITEM (ea.) (lbs.) 16.99 1.2 2040434 18.99 1.3 8005921 19.99 1.6 2040459

PRICE (ea.) 12.99 13.99 16.99

Brake locks both wheel and swivel • Blue Dyna-tred wheel • Tread width: 1-1/4" SWIVEL CASTER

Wheel Load O’all Wt. ITEM Ht. (lbs.) Size Cap. 5" 355 lbs. 5-3/4" 2.0 8005895

PRICE (ea.) 17.99

CASTER with BRAKE

RIGID CASTER

Wt. ITEM PRICE (lbs.) (ea.) 2.3 8005897 22.99

Wt. ITEM PRICE (lbs.) (ea.) 1.5 8005889 15.99

343

T R A I L E R

SINTERED IRON CASTERS

SWIVEL CASTER

Size Cap. O’all Ht. Wt. (lbs.) 2" x 7/8" 150 lbs. 2-1/2" 0.7 2-1/2" x 1" 200 lbs. 3-1/4" 1.3 3" x 1-1/8" 300 lbs. 3-3/4" 1.8

PRICE Wt. (lbs.) 5.99 0.6 8.99 1.2 9.99 1.9

ITEM 8037073 2040156 2040157

• Pressed and chromium plated swivel casters with double ball race • Grey rubber with shielding disks Type Wheel Load Cap. Wt. (lbs.) ITEM No brake No brake With brake With brake No brake* * Rigid caster

& T O W I N G

RIGID CASTER

ITEM 8037064 2040153 2040154

3" 4" 3" 4" 4"

110 lbs. 132 lbs. 110 lbs. 132 lbs. 132 lbs.

PRICE 4.99 7.99 8.99

PRICE

2040217 2040218 2040219 2040220 2040221

0.9 1.8 1.1 2.1 1.5

14.99 16.99 20.99 23.99 16.99

• Pressed and zincate steel swivel plate caster • Double ball race with screw and self-locking nut • Rubber wheel with thermoplastic shock-proof core SWIVEL CASTER

Wheel Load Cap. Wt. (lbs.) 3" 110 lbs. 1.4 4" 154 lbs. 1.6 5" 265 lbs. 3.0 6" 286 lbs. 3.5 8" 452 lbs. 6.7

ITEM 2040222 2040225 2040229 2040235 2040239

RIGID CASTER

PRICE Wt. (lbs.) 14.99 1.2 15.99 1.4 18.99 2.4 21.99 3.0 28.99 5.7

ITEM 2040224 2040227 2040231 2040238 2040241

PRICE 10.99 11.99 13.99 16.99 20.99

LARGE CASTERS • Ball bearings on wheel and swivel • 4 ply rated air-filled tires • Top plate 4" x 4-1/2" SWIVEL CASTER

Tire Size 2.50-4 3.50-4 4.10/3.50-4

Cap. 300 lbs. 350 lbs. 350 lbs.

O’all Ht. 8" 10" 12"

Wt. 6.9 lbs. 7.7 lbs. 8.9 lbs.

ITEM 2040115 2040113 2041291

RIGID CASTER

PRICE 33.99 36.99 54.99

Wt. 6.2 lbs. 7.2 lbs. 7.6 lbs.

ITEM 2040116 2040114 2040063

PRICE 31.99 33.99 45.99

4" DYNATRED CASTER

METAL CASTERS

• 4" dynatred wheel • 180 lb. capacity • O’all height: 5-1/4" • Blue in colour RIGID

799 99 2040297 – Wt. 1.5 lbs. . . . . . . . . . . . . . . 9 2040298 – Wt. 1.1 lbs. . . . . . . . . . . . . . .

SWIVEL

B C Type

344

A A B B C C

Rigid Swivel Rigid Swivel Rigid Swivel

Wheel Size 4" 4" 6" 6" 8" 8"

Cap. (lbs.) 660 660 1,100 1,100 1,320 1,320

O’all ht. 5-1/2" 5-1/2" 7" 7" 9-1/2" 9-1/2"

Wt. (lbs.) 5.9 6.8 9.1 9.8 11.9 12.8

ITEM

PRICE

2040256 2040255 2040257 2040258 2040259 2040260

15.99 17.99 19.99 21.99 22.99 24.99

2" CASTERS

• Steel wheels • 300 lb capacity • O’all height: 3" SWIVEL

399 99 2040296 – Wt. 0.5 lbs. . . . . . . . . . . . . . 2 2040295 – Wt. 0.7 lbs. . . . . . . . . . . . . .

RIGID

SCAFFOLDING CASTER • 500 lb. safe rolling capacity • Hand or foot operated braking system locks both the swivel and the wheel • O’all height: 9-1/2" from floor to base of stem • Long lasting 8" dia. x 2" vulcanized rubber wheel • Standard 1-3/8" dia. x 4" stem 2040254 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . . . . . .

5299/ea.

STEM CASTERS • Soft and smooth rolling thermoplastic wheel on polypropylene hub • Resist oil, acid, caustics, chemicals, and wear • Won’t dent, mar, fade, stain • Approx. wt. 0.5 lbs. Type

Wheel Size Load Cap. 2" x 13/16" 80 lbs. 2" x 13/16" 80 lbs. 3" x 13/16" 90 lbs. 3" x 13/16" 90 lbs. * with brake A Swivel B Swivel* A Swivel B Swivel*

SMALL GENERAL DUTY CASTERS

Size 1-1/4" rigid 1-1/4" swivel 1-1/2" rigid 1-1/2" swivel

Cap. Wt (lbs.) 50 lbs. 0.1 50 lbs. 0.1 60 lbs. 0.2 60 lbs. 0.2

ITEM PRICE 8001832 2.49 8001841 2.99 8001850 3.49 8001869 3.99

METAL CASTERS A

ITEM PRICE 2040013 4.99 8005919 5.99 2040018 5.99 8005920 6.99

• Capacity: 660 lbs. • O’all height: 3-3/4" • 3" dia. x 1-7/8" wide wheel • Ideal for shop cranes, engine stands, heavy duty carts SWIVEL

1599/ea. 99 2040287 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . 14 /ea. 2040286 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . RIGID

SMALL WHEELS

THREADED STEM SWIVEL CASTERS • Self-lubricating bearing • Soft rubber wheel • 1-1/2" long stem Wheel Stem Load Wt. Size Size Cap. (lbs.) 2" x 7/8" 3/8" - 16 80 lbs. 0.4 3" x 13/16" 3/8" - 16 90 lbs. 0.6 4" x 15/16" 1/2" - 13 115 lbs. 1.1

ITEM PRICE 2041176 4.99 2041184 5.99 2041192 8.99

• Rubber tread with plastic hub • Ideal replacement wheels on lawnmowers, etc. Size 6" x 1-1/2" 7" x 1-1/2" 8" x 1-3/4"

ITEM 2020067 2020068 8005916

& T O W I N G

PRICE 3.49 4.49 5.99

CASTERS

SEMI STEEL CASTERS

C • Steel caster with polyurethane wheels • O’all height 1" higher than wheel height

Bore Wt. (lbs.) 1/2" 0.7 1/2" 1.2 1/2" 1.5

R A I L E R

2,000 LB CAPACITY, 6" WHEEL C) RIGID 2040290 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• 160 lb. capacity • 4" x 1-1/4" Wt. (lbs.) ITEM PRICE Swivel 1.8 2040109 10.99 Rigid 1.3 2040110 8.99

3199 3 WHEEL DOLLY D) SWIVEL 99 2040289 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 E) SWIVEL with BRAKE 99 2040288 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 3,000 LB CAPACITY, 8" WHEEL C) RIGID 2040294 – Wt. 9.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) SWIVEL 2040292 – Wt 10.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) SWIVEL with BRAKE 2040291 – Wt. 10.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3799 3999 4199

• 6" dia. • 200 lb. capacity 8026520 – Wt. 0.7 lb. . . . . . . . . . . . . .

899

345

TONS OF NEW ITEMS ADDED! Surplus products have always been one of the special features of Princess Auto. Business overstocks,

discontinued merchandise, factory overruns, production line changes, etc. result in extremely good values for our customers. Many short-supply items are not advertised, so visit your nearest Princess Auto Store for the best selection!

AUDIO/VIDEO

AUTO ACCESSORIES

BATTERIES

Pages 361 to 368.

Pages 372, 381 to 387.

Pages 360

CELLULAR ACCESSORIES

COMPUTERS

ELECTRIC MOTORS

Pages 355 to 358

Pages 369 to 372.

Pages 348 to 352.

HAND TOOLS

LIGHTING

WHEELS

Pages 392 to 395.

Pages 382 to 384.

Pages 379.

Look for these identification symbols.

REMOVED FROM EQUIPMENT Refers to items which are not brand new but in excellent condition. Many of these items are removed from and recycled from heavy duty commercial industrial equipment and have many hours of service left in them. They are being offered for resale at a fraction of their original cost and are covered by our Royal Service Promise.

346

FACTORY RECONDITIONED Originally returned to a retailer for a variety of reasons, these items end up back at the factory where minor adjustments are made to put the product back to factory specs. Slightly used, these products are sold far below the price of a new one.

RUNNING LOW Occasionally you may see our Running Low Indicator beside an item you’re interested in. It’s there to let you know our stock on the item is limited and may not be available for much longer.

Shop Surplus online! www.princessauto.com

VALVE

GAS SHOCK

10" long extended suitable for use on latches, lids etc. 8000882 – Wt. 0.5 lbs.. . . . . . . . . . . . . . . . . . . . . . .

699

Cast iron hydraulic valve assembly. Part #GB6N, originally for a vehicle brake system as an equivalizer system. 8000577 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

GAS SHOCK

Assorted styles and models of gas lift shocks See your nearest PAL location for best selection. Assorted lengths, pin configurations, diameters and strengths. 99 8037028 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PRESSURE SWITCH

1/4" barb, 20/40 psi cut in/cut out. 8003882 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

REGULATOR

Adjustable pressure regulator. 8-12 ft-lb settable. O’all dim.: 5-1/2"l x 2"w x 1-7/8"h. 3890937 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

LUBRICATOR

Max. pressure: 150 PSI. Adjustable oil delivery rate. Keep your valuable air tools constantly lubricated. 1/2" O’all dim.: 8-1/2" x 3" x 3". 8015159 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . .

399

1499 VALVE

Pressure control valve. 25.0 bar out, 18.0 bar in. 3 electrical contacts on bottom. O’all dim.: 3-1/4" x 3-1/4" x 2-1/4". 5710338 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

REPAIR KIT

Compression ring kit for Craftsman™ and many other brands of oilless compressors. Contains: ring, sleeve for glider, o-rings, screw and instructions. For use on induction motors, single or twin cylinder. O’all dim.: 6-5/8" x 3-3/4" x 2". 99 8026067 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

499 C

AIR FITTINGS

A) ADAPTERS – Male threads. For lengthening hoses, repairs, etc. 3/8" x 3/8" male NPT. 49 8015168 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) FITTING – One pair 3/8" automotive style plug, 1/2" female NPT. O’all dim.: 5-1/2" x 3-1/2" x 1". ¢ 0430498 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) FITTING – 1 pair 3/8" automotive style plug, 1/2" male NPT. O’all dim.: 5-1/2" x 3-1/2" x 1". ¢ 0430497 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

AIR CYLINDERS

D) CYLINDER – 3/4" stroke, 5/8" bore. Double acting. 5/8" threaded shaft. 5/8" thread on cylinder. O’all retracted length: 5-3/4". 99 1201854 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) CYLINDER – Bimba® air powered cylinder. 7/16" shaft, threaded end, 1" to 1-1/2" rod extension. 99 8029144 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) CYLINDER – 1-1/4" bore, 7/16" threaded shaft retracts 3/4" when air is applied. 3/4" thread on cylinder. O’all extended length: 6-1/4" 99 1201821 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2 2 1

PRESSURE WASHER WANDS

G) SINGLE – Lance with adjustable spray tip hood. O’all dim.: 26" x 2-1/4" x 2-1/4". 99 5790159 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . H) DUAL – Adjustable handle for soap injector. O’all dim.: 22-5/8" x 7" x 1-1/2". 99 5790158 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

12 14

347

DRAIN HOLE

3/8" Suitable for boat hulls and many other drainage uses. 8003186 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

TURBO NOZZLE

Increase the output and effective cleaning power of your pressure washer. Fits most pressure washers. 8006517 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

SHOWER HEAD

Attaches to standard garden hose connector. Creates a shower-like water stream. 2-1/8" wide. 8002213 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HOSE and PLUMBING FITTINGS

A) COUPLER – Male garden hose coupler. 1/2" male thread on one end, 1/2" male barb fitting on the other. Can be used to repair hose, etc. ¢ 8050002 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) ADAPTER – Threads onto standard 1/2" female garden hose connector and transforms end to quick connector. ¢ 8049818 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) CONNECTOR – Universal quick connector. One end fits male quick connect. Other end fits female quick connect. ¢ 8050020 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . D) BUSHING – 3/8" female x 1/2" male. 99 5710335 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SHOWER HEAD

Attaches to standard garden hose connector. Creates a shower-like water stream. 1-1/4" wide. 8002212 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

99 1

PUMP

Originally designed for use in washing machines. Makes a great pump for drainage. Brand new. 120 VAC, 80 watts, 1-1/2" inlet, 1-1/4" outlet. 8035805 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CONTROLLER

4999

VIBRATING MOTOR

Mini disc style vibrating motor. Originally for use in pagers, cell phones etc. 3 - 9 VDC operation. O’all dim.: 1/2" x 1/2" x 1/8". 0750360 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Hand held controller box for toys. 2 joysticks. Uses 3 “C” batteries (not included) Comes with connection cord. O’all dim.: 4-1/2" x 4" x 2-1/4". 3890309 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

MOTORS 399 2TOY - 12 VDC, great hobby item. Pkg. of 2.

8010591 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

COUPLER

VIBRATING MOTOR

Pack of 10 mini vibrating motors. 6 VDC operation. Offset cam on shaft creates vibration. Originally from pagers and cell batteries. Lots of zip in a small package. 99 /pkg. 8039375 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

Small 3 VDC motor originally a dental tool. Includes rubber tips and chromed handle. O’all dim.: 4-3/4" x 2-1/4" x 1". 8007578 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

Flexible torque dampening coupler. Use between motors and gearboxes, pumps, chain drives etc. For 7/16" and 1/2" combination. Prevents loosening of connections from high torque starts 8001107 – Wt. 0.3 lbs.. . . . . . . . . . . . . . . . . . . . . . . . .

399

VIBRATING MOTOR

MOTOR

348

299

499

12/24 VDC vibrating enclosed motor. DIN style connector with lead attached. 8010546 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

799

MOTOR

• 115 VAC • 250 RPM • 1/12 HP • Dual shafts • Fan duty 8002531 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

MOTOR

12 VDC motor and assembly are believed to be from a vehicle's ABS system. Contains many useful components and valves. 99 8005061 – Wt. 13.7 lbs. . . . . . . . . . . . . . . . . . . . . .

MOTOR

• 115 volt • 1/28 HP • Dual shaft • Fan duty 8002550 - Wt. 5.3 lbs. . . . . . . . . . . . . . . . . . . .

VAC ELECTRIC MOTORS 1499 115 A) MOTOR – 1,725 RPM, CW rotation. 3/8" shaft. O’all dim.: 4-3/4" square. 99 0752618 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 7 B) 1/5 HP MOTOR – 2.5 amp. 60 Hz. 1,725 RPM. 3/8" shaft. O’all dim.: 8"l x 4"H x 4"W. 99 0750328 – Wt. 9.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) 1/20 HP 3-SPEED MOTOR – 0.7 amps. 1,115/975/850 RPM. Two 1/2" shafts with flat spot. O’all dim.: 5" x 6" x 8-1/4". 99 0753012 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

MOTOR

• 115 volt • 1/8 HP • Dual shaft • Fan duty 8002566 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . .

1499 VACUUM MOTOR

6 VDC MOTOR

Small 6 VDC motor with battery contacts and control switch. Originally from a child’s toy. Great hobby item. 99 8035645 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

120 VAC, 60 Hz. High torque vacuum motor from a shop vacuum. 5/16" threaded shaft. O’all dim.: 5-5/8"L x 4-3/4"W x 4-3/4"H. 0750327 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999

MINI GEAR MOTOR

115 volts. Clockwise rotation. 40 RPM. 0750298 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

799

GEARHEAD MOTOR

Small low voltage toy motor with gearhead box and microswitch. Great for display cases, store fixtures and the like. 8002891 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

GEARHEAD MOTOR

30 RPM, 1/25 HP motor, 24 to 36 VDC. 5/8" shaft 8013106 – Wt. 18.6 lbs. . . . . . . . . . . . . . . . . . .

MOTOR

12 VDC wiper motor. 16 RPM. 5/16" threaded shaft. 8002881 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

3999

GEARHEAD MOTOR

14999

Small gearhead motor with plastic housing and gear. Operates on 24.5 VDC @1.85 RPM output. Suitable for display cases etc. 8028902 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

899

349

MOTOR

120 VAC Johnson™ electric mini motor. Originally from a power vac. 5/32" shaft with flat spot. 8000634 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TIMING MOTORS

A) 85 VAC TIMER MOTOR – 1/36 RPM. 3 watt. 1/4"-12 tooth drive. O’all dim.: 2" x 2-3/4" x 1-1/2". 49 0751156 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) 120 VAC TIMING MOTOR – 60 Hz. 2.5 watt. 56-1/4 RPM. Shaft: 1/4" dia. x 1-1/4" long. O’all dim.: 2-1/2" x 2-1/2" x 2-3/8". 49 0750138 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) 24 VAC TIMER MOTOR – Mini gearhead motor. 24 VAC input. Useful in display cases etc. O’all dim.: 2-1/2" x 2" x 4". 99 8023480 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

STEPPING MOTOR

With control board. Mounting bracket houses an assortment of gears and idlers. Great hobby item. O’all dim.: 9" x 4-1/2" x 6". 8006392 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999

5 VDC STEPPING MOTOR

0.9° per step. 9/16" ribbed pulley on shaft. 4-wire. O’all dim.: 1-5/8" x 1-5/8" x 2". 0756676 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DC ELECTRIC MOTORS

D) 108 VDC MOTOR – 3/8" shaft. 99 0750205 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) 3-12 VDC ELECTRIC MOTOR – 1,950 RPM. 90 watt. 5/16" shaft. O’all dim.: 5" x 5" x 3". 99 0752626 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) 6 VDC FAN MOTOR – 6 VDC, 2 speed, 5/16" slotted shaft. O’all dim.: 5" x 3" x 3". 99 4211171 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9 4

VACUUM MOTOR

120 VAC, 60, Hz, originally from a vacuum cleaner. High torque, high RPM. O’all dim.: 6" x 5-7/8" x 5-7/8". 8019556 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

15 MINUTE

2999 MICROWAVE TIMER

15 amp. 125 VAC contact. Bell rings when switch shuts off.

0720257 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . .

BLOWER

Nidec Gamma 26 mini blower. 12 VDC operation, 0.14 amp draw. Great for cooling electronics, small electric motors etc. 8002918 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

12 VDC MINI FAN

699

• 0.14 amps, 7-blade fan • O’all dim.: 2" x 2" x 3/8" 0770224 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

COMPACT SQUARE COOLING FANS

350

Quiet running fans that are ideal for cooling and ventilating electronic equipment, power supplies and any small area. Volts Approx. Fan dia. Blade # O’all dim. Wt. ITEM PRICE CFM (lbs.) 12 VDC – – 7 2" x 2" x 5/8" 0.1 0770193 5.99 12 VDC 7 60 mm x 60 mm 0.1 8032657 6.99 12 VDC 20 92 mm 7 3-5/8" x 3-5/8" x 1" 0.2 8019609 12.99 12 VDC 40 2-1/4" 7 2-3/8" x 2-3/8" x 1" 0.2 0770017 4.99 12 VDC 34 2-7/8" 5 3-1/8" x 3-1/8" x 1-1/4" 0.2 0770370 7.99 12 VDC 17.2 7 90 mm x 90 mm 0.2 0770204 9.99 110 VAC 5 6-3/4" x 6 x 2" 2.1 8019547 49.99 110 VAC 5 4-3/4" x 4-3/4" 1.2 8012919 14.99

SWITCH

SPST, automotive pull switch. Low voltage. Heavy duty design. O’all dim.: 2-1/2"L x 2"W x 1"H. 4211162 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

RESISTORS

99¢

8-3/4" long x 1-1/8" dia. 0721498 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

149

DIMMER SWITCH

Floor mounted dimmer switch control for headlights. Heavy duty switch has many other uses, controls 12VDC equipment. 8004435 – Wt. 0.2 lbs . . . . . . . . . . . . . . . . . . . . . . . . . .

RESISTORS

Vitreous enamel. Ideal for applications involving high currents at very low resistance values. 1.0 ohm, 300 watt. Designed to withstand frequent start/stop cycles. Adjustable slider changes resistance. O’all dim.: 6-1/2" x 7/8" x 1-3/8". 99 0720384 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SWITCH

DPDT heavy duty switch. Originally for use with heated automobile seats. Labeled "high" and "low". Rated for 15 amps @ 115 VAC. 8002979 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

SWITCH

Rotary on/off DPST switch. Includes built-in 20 amp fuse. Originally used in automotive applications. Comes with mounting brackets. 8031596 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

SWITCH

Originally from a truck hoist kit. Includes microswitch mechanism, red warning light and cabling. 8058264 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

SWITCH

3 position, 2 circuit long reach switch. Off/anchor lights/anchor & running lights. Brass plated case and terminals resist corrosion. Excellent for marine and RV use. Made by Calterm. 99 8004582 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HEAT SWITCH

12 VDC, 12 amp. Pack of 5. O’all dim.: 6-1/4" x 3-1/4" x 1-1/4". 8000824 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

599/pkg.

PUSH BUTTON SWITCH

125V, 16 amps. SPST. O’all dim.: 1-7/8" x 1-1/4" x 9/16". 0720206 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

249

SWITCH

DIMMER

OEM quality automotive interior light dimmer. Roller type switch. 12 VDC. 8000801 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

125-250VAC. Mini footprint. White in colour. Pkg. of two. 8005033 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

SWITCH BRIDGE RECTIFIER

4 amp. Transfers AC voltage to DC voltage. 0720343 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

ROCKER SWITCH

Dual rocker in a single housing design. 125 volts, 20 amps. SPST pole throw. O’all dim.: 1-1/4" x 1-3/8" x 1". 8016069 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

2 pack. Mini footprint. Black in colour. 125-250 VAC. 8005034 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

MICRO SWITCH

199/ea.

125 volts, 10 amps. N.O./N.C. O’all dim. 2-7/8" x 1-1/4" x 5/8" 0720327 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

99¢/ea.

351

CONTROL PAD

LIQUID LEVEL SWITCH

Rated 120 volts, 10 amps. Cutler and hammer switch. Primarily an“On-Off” switch. 0705020 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

MICROSWITCH

Rated 1 HP, 125 VAC, 20 amp. Lever features roller wheel pusher. Great for assembly lines etc. 8003017 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

1299

Rated for 10 amps, 240 VAC, 100 VAC coil. N.O. design. 8042343 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

DRIVE

499

Mini cassette drive assembly. Originally from an answering machine. Includes motor, roller, capstan, pincher and all required components. 8037670 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

F) RELAY – Includes relay and bracket. Great

RELAYS

A) RELAY – Tyco style, 4-pin configuration. Model

#12135170. 99 8047776 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) RELAY – Tyco style, 5-pin configuration. Model #VF4-25F21-Z01. 99 8047801 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) RELAY – Tyco style, 4 pin configuration 99 8057265 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) RELAY – Omron style, 5-pin configuration. Model #121772234. 99 8048070 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) RELAY – GM style, 6-pin configuration. 99 8052288 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 3 3

352

125 VAC connector @ 30 amp locking connector. 8047892 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

CONTACTOR

SOLENOID

Rotating solenoid operates on 24 VDC and moves a control arm. Includes small magnet cylinders and a sensor pad. O’all dim.: 3-3/4" x 3" x 1-7/8". 3890358 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

CONNECTOR

SWITCH

N.O./N.C. microswitch, 10 amps @ 125/250 VAC, 0.5 amp @ 125 VDC. 8002951 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Fused control pad for amplifier etc. Includes on/off switch and volume control. Great for the hobbyist. O’all dim.: 6" x 7" x 2". 4211180 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 3

hobby item 8000592 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) RELAY – Tyco© brand relay. 5-pin, model #3602. 8048169 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) RELAY – 12 VDC. 8000594 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . I) RELAY – Omron style, 5-pin configuration. Model#12177233. 8057103 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . J) RELAY – 12 VDC, 20 amp, 4-pin. 8000683 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . K) RELAY – 12 VDC, 4-pin. 8000686 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

399 99¢ 399 399 399

SOUND MAKER

Belching sound, great for meetings, parties etc. 8006923 – Wt. 0.1 lbs. . . . . . . . . . . .

199

TRANSFORMERS

A) TRANSFORMER – Heavy duty welding transformer. No wiring diagram available. Priced accordingly. O’all dim.: 8-1/2" x 23" x 5-1/2". 99 0140259 – Wt. 28.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) TRANSFORMER – Heavy duty design. 115 VAC input, 13.8 VAC output @ approx. 15 amp. Originally for battery chargers. 99 0700192 – Wt. 8.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) TRANSFORMER – Input: 115 VAC, 60 Hz. Output: 12 VAC. O’all dim.: 2-1/2"L x 1"W x 1-1/2"H. 99 0720349 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39 29

DOOR CHIME

Comes complete with door chime and 2 switches. Also includes 16V transformer, 75 ft. of bell wire, and hardware. Installs easily. 99 8005131 – Wt. 3.4 lbs. . . . . . . . . .

DOOR CHIME D

SIRENS

D) SIREN – 6 tone alarm siren. Designed for car alarms but can be used in any 12 VDC system.. 99 8028662 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . E) SIREN – Horn speaker, rated 15 watts @ 8 ohms. Originally from an alarm system. 99 8049060 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

Installs in mere seconds. 200 ft. range. Battery operated. Includes a #A-23 battery for the remote. Receiver requires 3 “D” batteries (not included). 8005130 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999

RELAY ASSEMBLY CORD ENDS

Pack of 5 assorted cord ends. Great replacement ends or make your own extension cords. See your nearest PAL location for best selection. O’all dim.: 9" x 6" x 4". 99 8011509 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . /pkg.

F) 12V RELAY ASSEMBLY – 20/30 amp. 5 terminal. Designed for automotive radios, lights, alarms, etc. 99 0720234 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) SOCKET – 5 terminal female socket with 5 colour coded, 12" leads. Designed to fit relay 0720234, but has many other uses. 49 0720236 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 2

ELECTRICAL CORDS

H) CORD – 18/3 flat power cord with business machine plug end. 8-1/2 ft. long. 0700222 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . I) CORD – 18/2 ga, 6 ft. long. 8000417 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

399 99¢

J) CORD – 18/3 power cord with 3-prong plug. Great replacement cord for small power tools, kitchen appliances etc. 99 8049079 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

353

COUNTERS

A) 24 VDC 5 DIGIT COUNTER – O’all dim.: 1-3/4" x 2-1/2" x 1-1/2". 3890312 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) 24 VDC 6 DIGIT COUNTER – 1.5 watt. O’all dim.: 2-3/8" x 1-7/8" x 1-3/8". 3890702 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299 399

C) COUNTER ASSEMBLY – 110 VDC. 6 digit. Includes pigtail leads with connector. 8000908 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) COUNTER ASSEMBLY – 120 VAC, 7 digit. Includes pigtail leads. 8000930 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

POWER ADAPTERS E F G H I J J K L M N O

Output (VDC) 3.7 @ 0.35 A 4.4 @ 60 mA 5.0 @ 1.5 A 5.3 @ 500 mA 6 @ 800 mA 9.5 12 @ 200 mA 12 12@1,670 mA 12 @ 1A 15 @ 200 mA 24 VAC@700 mA

Input (VAC) 120, 60 Hz, 50 mA 120, 8 W 115 120 115@ 60 Hz 120, 9 W 120, 8 W 120 120 @60 Hz 120 115 120 @ 60 Hz, 26 W

O’all dim. Wt. (lbs.) 3-3/4" x 2-1/4" x 3-1/4" 0.4 2-1/4" x 1-3/4" x 1-3/8" 0.3 – 0.6 3-1/2" x 1-1/2" x 2-1/8" 0.2 – 1.0 2-1/2" x 2-1/4" x 2" 0.5 4-1/4" x 3-1/4" x 2-1/4" 0.3 – 1.3 – 1.8 – 1.4 – 0.5 – 1.1

ITEM PRICE 8007827 3.99 4211047 3.99 8000421 2.99 8007747 4.99 8000351 6.99 0720920 2.99 0721803 2.99 8006908 12.99 8000976 6.99 8030640 19.99 8048962 1.99 8002203 4.99

BATTERY PACK with CHARGER

CHARGER

354

Intelligent rapid charger. Quick and slow charging. Includes trickle charge function. Comes with home and vehicle adapters. For Ni-CD, Ni-MH and Lithium batteries. O’all dim.: 9-3/4" x 4-3/4" x 3-1/2". 99 8002706 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

Plugs into 12 VDC cigarette lighter adapter and provides 1.5, 3, 4.5, 6, 7.5, and 9 VDC at up to 800 mA of power. Includes a variety of plugs to fit most devices like laptops, cell phones, cameras, radios, etc. 99 8002703 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DESK CHARGER

For use with Motorola™ Star-Tac and equivalent. Charges Ni-CD, Ni-MH and Lithium Ion batteries. Dual slots, charges phone and extra battery in second slot. LED display indicates charge status. Includes adapter. 8004149 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . .

CAMCORDER CHARGER

DESKTOP CHARGER

CHARGER

1499

Designed for Nokia™ 51/6100 series cell phones. Charges phone and doubles as a desktop handsfree kit. Includes wall adapter. 13 VDC out @ 900mA. 99 8004178 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . .

SONY™ and Sharp™ charging ability. 8003214 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

Universal 8 mm and VHS-C camcorder battery charger. Used with lithium-ion (Li-IO) batteries. Includes charger, adapter and DC cigarette lighter adapter. 99 8053296 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

TECH TIP

LIGHTED CHARM

Attaches to cell phone, built in LED lights up when phone receives call. Includes lanyard, charm and battery. Really accessorize your phone. 8004187 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2499

299

Certain areas may restrict the use of cell phones in moving vehicles unless a handsfree kit is used. Check your local regulations and buy the correct kit for your area.

F G

D) HANDSFREE CELL PHONE KIT – Fits Motorola

Star Tac phones. 99 8002323 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) HANDSFREE KIT – Plug in style cell handsfree kit for Nokia 51-6100 series phone. Easy comfortable wearability. O’all dim.: 3" x 3" x 1" 99 8007729 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) HANDSFREE KIT – Translucent coloured handsfree kit with over the ear headset. For use with Nokia 5100/6100 series cell phones. 99 8002737 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) CHARGER/HANDSFREE KIT – 12 VDC plug in cell phone recharger with built in microphone and speaker for handsfree cell operation. Includes volume control and fuse. 99 0710023 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HANDSFREE KITS

A) HANDSFREE KIT – Nokia 51/6100 series.

Retractable headset to eliminate cord clutter. Includes belt clip. 99 8004150 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) HANDSFREE KIT – Retractable headset to eliminate cord clutter. Includes belt clip. Motorola 76/7789 series. 99 8004176 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) HANDSFREE KIT – Over the ear handsfree kit. Fits Qualcomm® and equivalent cell phones. Comfortable fit. 99 8033488 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4 4 6

355

HANDS FREE KITS

A) HANDSFREE KIT – Fits Samsung CHF100 cell phone and compatible. 99 0710261 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) HANDSFREE KIT – Designed for Nokia© 6100 series cell phones and equivalent. Features phone cradle, external speaker, microphone, charge/power cords and mounting hardware. Use your phone handsfree for added safety and charge your phone battery during the process. 99 8047730 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . C) HANDSFREE KIT – For Motorola Micro-Tac flip phone. Be safe... use your phone handsfree. Callers voice transmits through your FM radio. Powered by phone’s battery to eliminate excess cords. Includes travel 12 volt cigarette lighter charger 99 0710120 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . D) HANDSFREE KIT – Kit includes 12 VDC cigarette lighter socket charger and external magnet mount stubby antenna. Turn your Motorola™ Star-Tac or equivalent cell phone to a hands free phone with extended signal range, 99 8003741 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . .

E) HANDSFREE KIT – Plugs into 12 VDC cigarette lighter plug, provides full sized handset, phone cradle and charges phone while plugged in. Handset has its own cradle.

Wt. 0.8 lbs.

8002719 – NOKIA 8210 AND 8250 99 8002714 – SAMSUNG AND EQUIVALENT . . . . E) HANDSFREE KIT – Includes cradle for cell phone, plugs into 12 VDC cigarette lighter socket and provides charge for phone. Provides full size handset for more comfortable conversations. 99 8002287 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) HANDSFREE KIT – Motorola™ original hands free kit. Features 3 watt speaker, remote microphone and rapid battery charger. For use with Talkabout™ series of cell phones 99 8002011 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

G) CELL BATTERY – Ericsson© cell phone battery. Thick profile with belt clip. 6 VDC, 1,200 mAh. High capacity. 99 8039179 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . G) CELL BATTERY – Ericsson© cell phone battery. Slim profile with belt clip. 6 VDC, 650 mAh. Standard capacity. 99 8039295 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . H) CELL BATTERY – Designed for Motorola™ as an auxiliary battery. Rated 3.6 VDC output. 99 8001005 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

14 12

356

CELL PHONE BATTERIES

I) CELL BATTERY – Motorola™ Star-Tac and equivalent. 99 8002722 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . J) CELL BATTERY – Assorted sizes and styles. 99 8001204 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . K) CELL BATTERY – Designed for the Audioivox™ 405. Rated 4.8 VDC output. 99 8001001 – Wt. 0.3 lbs.. . . . . . . . . . . . . . . . . . . . . . . . L) FLASHING BATTERY – LED light flashing battery. Flashes on incoming call signal. For use with Nokia™ 3300 cell phones. Includes translucent rear phone cover. 99 8002284 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

14 4 6

CELL PHONE CHARGERS

A) CHARGER – Originally from a Sony© cell phone. 12 VDC input, 4.5 VDC output. Fits standard car cigarette lighter socket. O’all dim.: 4" x 1-1/2" x 1". 99 8024960 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) CHARGER – Motorola™ brand cigarette lighter cell phone charger. Ultra Saver E Series compatible. Automotive style fuse. 99 8002310 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) CHARGER – Cigarette lighter charger for Sprint PCS model SC-925 phone and equivalent. Comes with fuse and bushing for large receptacles. 99 8007783 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) CHARGER – Motorola cigarette lighter charge. For E-series ultra saver flip phones. Includes sleeve for both lighter socket sizes. 99 8016130 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) CHARGER – Motorola® dual desktop cell

1 9 9 6

SPEAKERPHONE

phone charger. Priority front slot with auxiliary rear slot charger. LED indicators for charge status. Requires adapter from phone (Not included). 99 8034575 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) CHARGER – 12 VDC cigarette lighter socket cell phone charger. For use with Motorola™ cell phones. 99 8009852 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) CHARGER – 12 VDC cigarette lighter charger for Motorola 99 8002732 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) CHARGER – Assorted styles and models of cellular phone cigarette lighter socket chargers. See nearest PAL location for best selection. 99 0710030 – Wt. 0.3 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . H) CHARGER – Translucent styled 12 VDC cigarette lighter charger for use with 51/6100 Nokia cell phones. 99 8002746 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

9 4 6 6 3

CELL PHONE HOLOGRAMS

Original Motorola© clip on hands free speaker phone adapter. Clips onto Star-Tac, Time Port, and equivalent turning your phone into a hands free speaker phone. Simply place phone onto desk and speak. 8048640 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

2499

Can be trimmed to fit almost any phone. Assorted images available, fits over screen but allows for viewing of screen beneath. Customize your cell phone easily. 8002288 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

MOTOROLA TYPE ADAPTER

Plugs into Motorola™ flip phones, plug in for headset and microphones for handsfree operation. 8008960 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199 PHONE

COVERS

Cellular phone face plate. For use with most Nokia® phones. Pack of 2. O’all dim.: 11" x 1-1/2" x 3-7/8".

PHONE COVER

Cellular phone face plate. Chrome-black colour. For use with most Nokia® phones. O’all dim.: 11" x 1-1/2" x 3-7/8". 8033521 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.2 lbs.

499

8033479 – Trans. blue and orange . . . . . . . . . . . 8033585 – Trans. pink and black. . . . . . . . . . . . 8033692 – Snake and high gloss white . . . . . .

999 999 999

357

CELL PHONE ACCESSORIES

A) ELASTIC CORD PHONE HOLDER – Designed for use with cell phones and portable computers but can be used to hold phone to practically anything. 99 8051902 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) PHONE HOLDER – Mounts to virtually any dashboard vent. Holds any style cell phone by using included self adhesive mount clips. Great for use with hands free kits for added safety. 99 8030418 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) PHONE HOLDER – Surface mount cell phone holder. Can be mounted with screws or included self adhesive tape. Adjustable heights and widths to accommodate most makes of cell phones and automobiles. 99 8053312 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

1 1

D) PHONE HOLDER – Universal cell phone holder. Fits most brands. A must for use with hands free kits etc. Easily mounts almost anywhere in vehicles. 99 8006157 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) PHONE HOLDER – Mounts virtually anywhere with self adhesive tape. Holds phones with swivel clip mounts. Great for use with hands free kits for added safety. 99 8047749 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) PHONE HOLDER – Comes with swivel belt clip. For use with Motorola Star Tac phones. Durable high-impact plastic construction. Made by Sanyo.99 8006202 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 1 2

CELL PHONE CASES

G) CELL PHONE CASE – Brand name Motorola leather carry case with belt clip and tether strap. Heavy duty, for CBs, cordless phones, etc. 99 8004333 – Wt. 0.4 lbs.. . . . . . . . . . . . . . . . . . . . . . . H) CELL PHONE CASE – Official Motorola® licensed NFL® cell phone case for Star-Tac, Talkabout, Timeport and equivalent. Includes belt clip and wrist strap. Black leather. O’all dim.: 9-1/4" x 4-5/8" x 1-3/8".

Wt. 0.2 lbs.

8032808 – Giants 8032817 – 49er's 8032826 – Steelers 8032844 – Broncos 99 8032871 – Packers . . . . . . . . . . . . . . . . . . . . . . . . . . I) CELL PHONE CASE – Elasto-polymer stretches for a tight fit. For use with Nokia® phone. O’all dim.: 11" x 3-7/8" x 1-1/2".

Wt. 0.1 lbs.

8033736 – Blue 8033503 – Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

PLATE BLANK

2 4 3

Design your own network/cable box. Fits standard electrical boxes. Wt. 0.1 lbs.

Wt. 0.1 lbs.

8004303 – White 8035182 – Ivory . . . . . . . . . . . . . . . . . . . . . . . . . . .

WALL PLATES

Blank for port wall plate. Snaps in to cover unused openings. White. O’all dim.: 4-7/8" x 2-3/8" x 1".

358

J) CELL PHONE CASE – Leather cellular phone case. Front plastic display cover. Includes belt clip and wrist strap. 99 8033433 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . K) CELL PHONE CARRY CASE – Hard shelled durable plastic cell carry case. Comes with belt clip. Genuine Motorola™ brand. 99 0710076 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . L) CELL PHONE CASE – Genuine leather cell phone case for Motorola™ flip phone and equivalent phones. 99 8003742 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . M) CELL PHONE CASE – Neoprene full covering case with swivel belt clip. Includes wrist lanyard. Fits Motorola© Star-Tac and equivalent. 99 8033781 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99¢

8035128 – Single 8035119 – Dual 8035253 – Triple . . . . . . . . . . . . . . . . . . . . . . . . . . . .

179

PHONE JACK

MODULAR JACK

Surface mount dual telephone wall jack. For use with RJ45 and CAT-5 wiring. 8035100 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

99¢

DUAL PHONE JACK

JACK

Dual Cat-5 (RJ45) wall mount jack. Surface mount. 8047160 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Fits standard electrical boxes, features composite video and L/R audio RCA jacks. Gold plated. Solder type connections on rear of plate. 8001504 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

8020232 – White 8020401 – Beige . . . . . . . . . . . . . . . . . . . . . . . .

999/pkg.

COUPLER

110 type pushdown CAT-5 coupler. Supports 1 or 2 lines. Standard outlet for voice or data. O’all dim.: 4-7/8" x 3-3/4" x 1". 8004312 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

TECH TIP

COAXIAL WALL PLATES

3 pack decora style, coaxial connection. 0710243 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

Box of 6 duplex telephone jacks. Great for connecting 2 telephones into one line. Contractor size pack. Plates fit standard electrical boxes. O’all dim.: 7-3/4" x 3-3/4" x 1/4". Wt. 0.7 lbs.

WALLPLATE

Standard RJ-11 telephone jack with 4-wire connectors designed to fit older post type junction boxes. Push on connectors. Not for 110 punch down connections. 8002627 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

599/pkg.

Do not install low voltage telecommunications cable in the same box or conduit as high voltage wiring. Keep cable runs short and bends gradual for best performance.

TELEPHONE COMPONENTS

A) PHONE CORD – Wall outlet to phone base cord. Designed for wall mount telephones. 6" long. O’all dim.: 4-7/8" x 2-3/8" x 1-1/2". 99 8017273 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) JACK ICONS – Keystone jack icon stickers. Use to identify telephones, computers, etc. Pack of 5 sheets. ¢ 3890866 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . /pk. C) ADAPTER – Plugs 2 voice or data devices into 1 jack. Each jack supports 1 or 2 lines. O’all dim.: 4-3/4" x 2-3/8" x 1-1/4". 49 0720415 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) CORD RETRACTOR – Cord reel with phone jack style plug on one end. Cord extends 41". Reel has fairlead to reduce cord wear. O’all dim.: 4" x 4" x 1". 99 3890627 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) RETRACTABLE PHONE CABLE – Installs easily between phone and handset. Eliminates cord tangling, automatically retracts. 6 ft. reach. Lockable. 99 8041497 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2 2 6

F) 12 FT COILED TELEPHONE CORD

Assorted colours. 99 0720146 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) PHONE CORD – Standard RJ-11 plugs on both ends and ferrite core for RF noise on one end. 14 ft. long. 99 8002972 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) PHONE CORDS – 1 or 2 line.

1 1

Wt. 0.1 lbs.

99¢ 99 99 2 4

0720414 – 7 ft. long Ivory . . . . . . . . . . . . . . . . . . . ¢ 0720410 – 14 ft. long White . . . . . . . . . . . . . . . . . ¢ 0720412 – 14 ft. long White . . . . . . . . . . . . . . . . . . 99 8008620 – 15 ft. long . . . . . . . . . . . . . . . . . . . . . . . . . 99 8008728 – 25 ft. long . . . . . . . . . . . . . . . . . . . . . . . . . I) PHONE CABLE – 4-wire phone cord with included 2 to 1 adapter. Good for adding second device like modem, fax, answering machines,etc. to an existing phone jack. 99 8037689 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

359

GEL BATTERY

BATTERY

Sealed lead acid battery, 12 VDC @ 1.3 amp-hr output. Good security system backup battery. 8037448 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

12 VDC, Rechargeable. Great for alarm systems, projects, etc. 8006373 – Wt. 5.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999

BATTERY

Energizer® camera battery. Alkaline, 6.0 VDC, “J” size. 8027495 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699 BATTERY PACK with CHARGER

9.6 VDC Ni-CD battery pack with wall adapter charger. Great for toys, hobbyists, inventors, etc. 8002311 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

BATTERY HOLDER

Plastic battery case holds 2 “D” size batteries in series. O’all dim.: 3" x 2-3/4" x 1-1/4". 3890731 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2499

99¢ BATTERY

BATTERY

Duracell© lithium 6V battery. Standard replacement for CMOS computer battery, has many other uses. Includes velcro mounting tape. O’all dim.: 3-1/2" x 3-1/2" x 1". 99 0710304 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Originally out of flasher barricade lights. Rated 4 VDC @ 3 amp-hrs. Great hobby battery. O’all dim.: 3-1/2" x 2-3/4" x 1-3/8". 8026236 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

899

PORTABLE CD MOUNT

For mounting CD players in cars, trucks, etc. Prevents skipping, mounts at any angle. 8053321 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

MOUNT

BATTERY

12 VDC @ 92 amp-hrs. Heavy duty, non-spillable battery. Super high output with easy carry handle. Great for RVs, boats etc. to power 12 VDC accesories. Made by Hawker. 99 8005518 – Wt. 61.8 lbs. . . . . . . . . . . . . . . . . . .

199

Wall/ceiling mount speaker bracket. 360° rotation, 90° tilt. Built-in safety wire protects against falling speakers. Includes adjustment allen wrench. Can be used to mount a wide variety of items. 8043832 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

1299

STABILIZER TRAY

CORDLESS PHONE BATTERY

360

Ni-MH. Great hobby item. 8000347 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

Designed for automobile use. Spring suspension dampens shock to portable CD and tape players. Adjustable to fit most portables from 4-3/4" x 6" to 6-1/4" x 8". O’all dim.: 7"L x 5-7/8"W x 2-1/2"H. 3890962 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

TWEETER

TWEETER SET

Super high efficiency surface mount tweeter set. Neodymium, 50 watts RMS, 8 - 22,000 Hz, 4 ohm. Direct connect to existing speakers. Includes wiring, crossovers and mounting hardware. O’all dim.: 6" x 5-1/4"x 1-1/4" 99 4211226 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

Low profile high excursion tweeter. 0.4 watt, 8 ohm impedance. O’all dim.: 2" x 2" x 1/8". 4211099 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TWEETER

Automotive tweeter with crossover. Comes with wire leads. O’all dim.: 4" x 2" x 2". 0710315 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SPEAKER

5" round OEM. Delco automotive speaker 8003445 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

399

199 SPEAKER

3-1/2" coaxial 2-way speaker. Rated 30 watts RMS, 4 ohm. Great replacement or upgrade speaker. Heavy duty magnet. 8001332 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

999

SPEAKER SET

3-1/2" coaxial 2-way speaker. Shielded for use around video screens. Great replacement or upgrade speaker. Heavy duty magnet. 99 8001329 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . .

SPEAKER

4" x 6" coaxial 2-way speaker. Rated 40 watts RMS.Great replacement or upgrade speaker. Heavy duty magnet. 8001330 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . .

1499

SPEAKER

Sony X-plod 5 in. dia. 3-way speaker. Great replacement or upgrade speaker. 8001669 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

SPEAKER

2999

6" dia., 2-way, 4 ohm, 50 watts, 40-20 kHz response. Polyolefin blue woofer cone. Great replacement or upgrade speaker. Foam surround. O’all dim.: 7" x 6-1/2" x 3". 8011411 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

SPEAKER

40 watt, dual cone speaker. 5-1/4". 8004778 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999 SPEAKER

4" coaxial 2-way speaker. Rated 30 watts RMS. Great replacement or upgrade speaker. Heavy duty magnet. 8001334 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . .

SPEAKER

50 watt, dual cone speaker. 6-1/2". 8004779 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

1299

1299 SPEAKER

SPEAKER

2" dia., shielded for use around TVs, monitors, etc. 8013543 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

5-1/4" round coaxial 2-way speaker. Great replacement or upgrade speaker. Heavy duty magnet. 8001331 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . .

1499

361

SPEAKER

6" duo-cone, 4 ohm, 30 watt, mounted in plastic bracket. O’all dim.: 7" x 7" x 2-5/8". 0710267 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

SPEAKER

Dashboard 3-1/2" dia. full range speaker. Rated 15 watt output. Great replacement or upgrade speaker. 8001454 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Shielded 3-1/2" x 2" speaker. Rated 4 watt, 16 ohm. Full range design. O’all dim.: 3-1/2" x 2" x 1-3/4". 0710266 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

SPEAKER

699

4" 2-way speaker with swivel tweeter Includes grille, wire and mounting hardware. Made by JENSEN™. Great replacement or upgrade speaker. 8047838 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

4999

SPEAKER

Quality OEM fit. Great replacement or upgrade speaker. 4" x 6" 99 8003461 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SPEAKERS

2-way car audio speaker system. 4" dia. titanium coated woofer cone. 1" voice coil. 13 mm mylar dome swivel tweeters. 8047847 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . .

SPEAKERS

4" 2-way speakers with swivel adjustable tweeter. 75 watts max. power. 4 ohm. 8047856 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

4999

SPEAKER SET

99 /pr.

SPEAKER ENCLOSURE

Carpeted 6 x 9 speaker box. Includes spring terminals, acoustically insulated cabinet and wire leads. Rugged carpeting. Great for trucks, hatchbacks etc. O’all dim.: 12-1/4" x 7" x 8-1/4". 0710324 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

2-way speaker set with cabinets. Great for surround sound, backyard or anywhere needing a bookshelf sized speaker. Ported enclosure with spring clip terminals and dual mount system. Cabinets are 9"H x 5-7/8"W X 5-3/4"D each. O’all dim.: 17-1/4" x 10-1/2" x 8". 99 8027716 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

1299 SPEAKER

SPEAKER WIRE

Prepacked 18 ga. x 25 ft. speaker wire. Replace the wire on your system conveniently, easily and economically. High power handling. O’all dim.: 7-3/4" x 3-3/4" x 1-1/4". 0710314 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

Italiavox™ woofers. 10" 8 ohm, 100 Watts rms. Feature 1-1/2" voice coils. Coated cones. Great replacement home stereo speaker or make your own woofer box, etc. Rigid build and large magnets create real usable bass for outstanding home theater and pounding musical beats. An amazing speaker at an economy price. 99 8033969 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

SPEAKER WIRE

362

14-gauge. High grade with clear insulation. 8005303 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

Flat profile. Sold by the spool. Easy to conceal, light colour blends well with most decors. 8001436 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

WIRING KIT WIRING KITS

High power audio amplifier installation kit. Features heavy gauge power wire, ground wire, and RCA interconnect with lead in wire. Comes with fuse and high quality holder, split loom wire, and all necessary hardware. Wt. 2.3 lbs.

4211230 – 400 watt/60 amp . . . . . . . . . . . . . . . 4211229 – 200 watt/30 amp . . . . . . . . . . . . . . .

Super high performance 1,600 watt car audio hook-up kit. Includes 20 ft. long 4 ga. power cable, 3 ft. long 4 ga. ground cable, 16 ft. RCA cables, high quality fuse holder with fuse, ring terminals and all mounting accessories. 99 8000314 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999 1999

AMPLIFIER WIRING KIT INSTALLATION KIT

Includes everything you need to install a 4 channel 450 watt audio amplifier. 99 8006075 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

High quality EFX© brand amp wiring kit by SCOSCHE™. Kit designed for single amplifier/ 4 speaker set ups. Includes 20 ft. 12 ga. power cable, 20 ft. RCA audio cables, 30 ft. speaker wire, 6 ft. loom wire, 24 K gold plated connectors/fuse holder and all necessary hardware. Rated for 200 watts. 99 8049961 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

TECH TIP SPEAKER WIRE

8 ft. long. Thick gauge for higher power handling, includes pre-mounted terminal pins 8005777 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Wiring kits contain large gauge wiring and heavy duty fuses which makes them great for many different 12VDC applications.

999 CONNECTORS

4 pack. Gold plated connectors with set screws fit 12 gauge speaker cable or smaller. Made by Acoustic Research. Great ends for test leads etc. 8005328 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SPEAKER WIRE

20 ft. long. Great for all types of speakers. Replace or upgrade broken/tarnished existing cable RCA type ends on both sides 8004929 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299 CROSSOVER Subwoofer crossover network.

CABLE

4 conductor cable 10 ft. long. 1/8" headphone jack on the other end. 0710112 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

CD PLAYER

Internal component of a CD player. Includes electronics, laser pick-up with drive track and many other components. Trayless internal design. Great for the hobbyist. 8002894 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

Great for amplifiers with out crossover controls. Features frequency cutoff points at 80, 125 and 250 Hz. RCA outputs with gain controls, line level inputs. 8059735 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

AUDIO FILTER

1499

Audio RF noise filter. Excellent build quality. Originally for an automotive TV/VCR system. Adapts easily to any 12V requirement. O’all dim.: 5-1/4" x 2" x 3-1/8". 8037858 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

363

ANSWERING MACHINE TAPE

DISC KEEPER

Continuous looping 30 second tape designed for answering machines. Fits standard tape players. Great for recording hold messages, etc. 0710244 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

Designed to hold 10 game CDs and their respective manuals but will hold any type of DVD or CD. Also provides storage for memory cards or small accessories. Zip close case and wrist tether. Has many other uses. 8001675 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

899

CASSETTE PLAYER

CASSETTE DECK CLEANER

Complete with cleaning fluid and replacement swipe for many cleanings. 3890458 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

Portable cassette player with ear bud headphones. Designed to look like a Game Boy™. Great for children as a first tape player. Rugged design. 8000436 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

1299

JACK

EXTENSION SPEAKER

Comes with cord and bracket, plugs into 1/8" phone jack, great for CBs, ham radios, cell handsfree kits, etc. 8005771 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Adapts 1/4" phono jack to RCA style female jack. 8017718 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

199

ADAPTER JACK

1/8" stereo female to 1/8" male mono jack. Adapts stereo headphones to mono sources etc. O’all dim.: 4-3/4" x 2-3/8" x 1". 99 8002680 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ADAPTER

Allows you to play your portable CD, MP3 player through your vehicle's tape deck. Great sound quality. 8006193 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ADAPTER

RCA© 1/8" female phone jack to male RCA type jack adapter. Great for microphones etc. 49 8017264 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

JACKS

1/8" monaural 2 conductor phono plug. Replace worn jacks or make your own cables. Pack of 2. 0710176 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

149/pr.

XLR CONNECTORS

A) MALE SOCKET – XLR© style wall /plate speaker hookup jack. 3 pin, high quality construction, male socket. 99 8002026 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) FEMALE PLUG – XLR© style microphone/speaker hookup jack. 3 pin, high quality construction, female ends. 99 8002023 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) MALE PLUG – XLR© style microphone/speaker hookup jack. 3 pin, high quality construction, male ends. 99 8002027 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 3

364

VOLUME CONTROL

Sets volume of stereo speakers. Impedance matching to handle almost any speaker load. Has settable max volume tab to ensure no overdriving of speakers. 35 watt RMS, 75 watt music max power handling. Mounts in standard electrical box. 8003680 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

RCA PATCH CORDS

A) 10 FT SPEAKER CABLE – with male RCA plug on one end. 49 0720319 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) 6 FT RCA CABLE – Male to male RCA style cable. 75 ohm. Gold style ends. ¢ 0710108 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) 10 FT EXTENSION – RCA style cable extension with male and female ends. Great for lengthening speaker wires. 99 0710159 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) RCA CABLE – Purple. Male to male RCA stereo cables. Double shielded. Gold plated. All coloured cables for easier patching. 99 8006060 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . E) RCA CABLE – 3 ft. long. RCA type plugs on both ends. ¢ 8055962 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . F) 18" RCA CABLE – For stereo audio. 99 8006094 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) 25 FT RCA CABLE – Clear audio cables. Male to male RCA style (left & right). 99 8006065 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) 6 FT RCA CABLE – Stereo audio nickel plated ends. 99 8006816 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99 2

99 1 9 2

I) 6 FT RCA CABLE – for stereo audio transfer. 99 8006072 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . J) 6 FT COMPONENT CABLE – 6 ft. component video cable. Gold plated, precision-machined RCA connectors. Nitrogen-injected dielectric. Pure, silver-coated, oxygen-free, solid copper conductors. Multi-shielded design. Enhances picture clarity. Made by Acoustic Research. 99 8005804 – Wt. 1.4 lbs. K) 15 FT DIGITAL SUBWOOFER CABLE – RCA ends, heavy shielding. Includes Y adapter, changing 1 female to 2 males 99 8004304 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . L) 6 FT DIGITAL AUDIO CABLE – Gold plated, precision-machined RCA connectors. Nitrogeninjected dielectric. Pure, oxygen-free, solid copper conductors. Multi-shielded design. Great sound quality. Made by Acoustic Research 99 8005812 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . M) 3 FT DIGITAL AUDIO CABLE – RCA ends 99 8004317 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . N) 3 FT DIGITAL AUDIO CABLE – Gold plated contacts. Home theatre grade video cable with RCA ends. 99 8009996 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

29 19

7 9

CABLE

S-video. Gold plated. Pure, oxygen-free copper stranded conductors. 6-shield design. Enhances picture clarity. Made by Acoustic Research. 99 8005802 – Wt. 0.6 lbs. . . . . . . .

CABLE

6 ft. long. Gold plated ends. 1 Svideo, 2 RCA connectors. High quality. 99 8004479 – Wt. 0.9 lbs. . . . . .

CABLE

25 ft. long, S-video connectors on both ends, great if long cable runs are needed. 99 8005629 – Wt. 0.5 lbs. . . . . .

365

ASSORTED REMOTES

ADAPTER

6" long. Y- adapter, 1 male to 2 female RCA splitter. 8006811 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

COAXIAL CABLE

100 ft. long. RG6, gold plated ends. 8003223 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1499

High quality assorted SONY© remotes in many different button and device configurations. Great replacement remote 99 8012152 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

REMOTE

Learns functions of your original remote. Controls 6 devices (TV, DVD, VCR, CD, cable, satellite). Works with over 325 brands. Philips. 99 8006175 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

SATELLITE CABLE

75 ft. long, RG6, includes protective weather boots. 8003602 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

CABLE

1499

RG59/U, 75 Ω gold plated RCA ends. Great for video transfer. 0710228 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢

COAX CABLE ACCESSORIES

A) SPLITTER – 2-way coaxial splitter. 5-890 MHz. input frequency. Suitable for antenna and CATV. O’all dim.: 2" x 1-7/8" x 1/2". ¢ 8008862 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) ADAPTER – Adapts coaxial cable to 1/8" monaural phone jack. ¢ 8046401 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

INSTALLATION KIT

Deluxe satellite dish install kit. Installs most mini dishes. Includes all hardware, clamps, ties and anchors for wood or hardwall installations. Comes with ground wire, phone wire and 100 ft. of coaxial cable. Includes audio/video cabling. O’all dim.: 13" x 11-3/8" x 5". 99 0710313 – Wt. 7.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

BAND SEPARATOR

VHF/UHF/FM compatible with most antennas and coax cable. 8001706 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

VIDEO AMPLIFIER

In-line coaxial amplifier. Great for cable runs over 100 ft. Designed for use with satellite systems. 0710149 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

HEADPHONES

SONY© High quality construction and great sound. Adjustable. 8015827 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

HEADPHONES

366

SONY© sport style headphones. Flexible design, gold plated 1/8" phono jack. Great sounding headphones. 8015863 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HEAD PHONES

899

Assorted styles of headphones, great for radios, CD players, PCs, etc. 0710250 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

MICROPHONE

Universal replacement microphone with desk stand and on/off switch. Fits 1/8" jack, Features 3/32" jack remote wire for on/off switch to control tape deck. 8019887 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

Universal style microphone with 1/4" or 1/8" phono plugs. On/off switch. For use with most recording devices. 8002700 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

CABLE STANDOFFS

Clips to 1-1/2" O.D. piping. Routes wire neatly and safely from antenna to TV set. Good for RG59, RG6 and leadin wire setups. Has many other uses. 99 8001412 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ANTENNA AMPLIFIER

Improves picture clarity and audio signal. Amplifies VHF/UHF and FM signals. Good for fringe areas. 99 8022463 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

Keeps antenna cable secure and away from walls, etc. Has many other cabling uses 8001712 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

COMBINER

Combines VHF/UHF and converts them to coaxial input/output. Reversible. Great for combining different technologies. 8013115 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

STAND-OFFS

199 RING

2" hitching ring with lag bolt eye. Heavy steel construction. 8004058 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SPLITTER/ COMBINER

• VHF/UHF • Combines, splits or changes antenna feed to TV, VCR, etc. 8001769 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

STANDOFFS

199

Pack of 4 antenna wire routing standoffs. Thread in style. Suitable for other wire as well. O’all dim.: 7-3/4" x 4-1/8" x 1". 99 8020438 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . pkg.

GUYWIRE CLIPS

Pack of 2 alligator clip leads. Originally designed for TV antenna connection. Makes great test leads or mini clamps etc. 99 8058941 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

50 ft. of steel guy wire . Great for rooftop antennas, etc. 6 x 19 construction. Many other uses 8002635 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

ANTENNA WIRE

300 ohm, twin lead antenna cable. Also can be used for speaker wire, low volt applications. Made by RCA™. Weather resistant Wt. 1.1 lbs.

0710243 – 50 ft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8046900 – 100 ft. . . . . . . . . . . . . . . . . . . . . . . . . . . .

CHIMNEY MOUNT

599 799

Kit includes everything you need for a quality mounting of your antenna to a chimney etc. Includes 2 clamps with strapping, 300/75 ohm transformer, 6 cable standoffs and all necessary hardware. 99 8056890 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

367

ANTENNA

Cell phone look-alike replacement. Fits most cars. AM/FM. 22-3/4" long. Wt. 0.2 lbs.

8030597 – YELLOW 8030588 – GREEN 8030613 – RED 8030604 – PINK 8030622 – WHITE . . . . . . . . . . . . . . . . . . . . . . . . . . .

149

ANTENNA

Fully functional novelty AM/FM car antennas. Assorted shapes and styles available. Adds a custom look to your vehicle. 99 8002468 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ANTENNA

Rubber mast replacement antenna. Threaded mount fits standard bases. Never bend or break another antenna again. 49 8030631 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ANTENNA

Short antenna with mount base and cabling. Thread on connector, chrome mast. 8002973 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

ADAPTER

Antenna cable adapter for VW cars. 8001580 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499 ANTENNA

Bulk thread on flexible phone antenna. Black. 8016149 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

899

ANTENNA

Trunk mount cellular antenna. Includes hook-up cable. Base loaded. 8003727 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499 UNIVERSAL DASH MOUNT

LAMP MODULE

X-10 Powerhouse™ lamp control module. Uses existing wiring to control lamps. Great add on to automation systems. Add a compatible switch and control any outlet from any switch. 8049042 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

Fits most makes and models. Allows install of post and face plate type head units 8001558 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

1299 CB MOUNT KIT

POWER BAR MODEM MODULE

Fax/modem surge unit. Great hobby project. Protection to RJ11 devices. 130 joules. 8041558 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

Adjustable under dash mobile CB mount bracket. Allows quick removal of CB to transfer unit between vehicles. Complete with quick connect power harness. O’all dim.: 11"L x 4-1/4"W x 1/2"H. 3890864 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

DRIVE CLEANER

SPEAKERS

368

Originally designed for Compaq monitors. Great sound in a small package. Set of 2. 99 /pr. 0710227 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . .

Uses isopropyl alcohol and a dummy diskette to clean and renew all 3-1/2" drives. 3 separate cleanings per packet 3890284 – Wt. 0.1.lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢

FINGER PRINT READER

Low cost, finger print reader provides more security than passwords and screensavers. Great for limiting access to computers, networks, internet. Plugs in via parallel port or PS/2 inline connectors. 99 8002821 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

KEYBOARD

Sony™ VAIO computer keyboard. PS/2 connector. Features extra buttons for e-mail, internet, sleep etc. Great replacement/upgrade keyboard. 99 8002892 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

SERIAL SWITCH

PICKUP

Infrared data transfer pickup for PC with attached serial plug. Rated 12 VDC @10 mA. Combining 2 units allows PC to transfer information wirelessly. Great for electronic hobbyists, etc. 99 8016256 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Parallel or serial applications, DB25 connector, connects 1 computer up to multiple printers or multiple computers up to 1 printer etc. Heavy duty steel box. Wt. 2.2 lbs.

999 1299

8000431 – 2 POSITION . . . . . . . . . . . . . . . . . . . . . . 8000459 – 4 POSITION (SHOWN) . . . . . . . . .

COVER Compact flash card reader for digital cameras etc. Made by RCA©. Connects via PS/2 or serial port saving valuable USB slots for other devices. Pass through connectors. 99 8047179 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

Heavy gauge plastic, anti-static. Originally a printer cover. Can be used to protect many other items. Covers up to 25-1/2" x 7" x 1-1/2". Don’t let dust damage your valuable equipment. O’all dim.: 7" x 4-5/8" x 1-1/2". 8020287 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

POOL MOUSE

MOUSE PHONE

EXTERNAL READER

Standard USB mouse with 3 buttons and mini pool cue uses roller to activate movement in the included Virtual Pool© video game. 99 8058193 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

Standard 2-button mouse with PS/2 connector. Mouse body features telephone with headset. Plugs into standard phone jack. Allows handsfree telephone at the push of a button. Save space with the mouse phone. O’all dim.: 10" x 7-1/4" 2-1/2". 99 8017246 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

P5 GLOVE CONTROLLER

The ultimate 3D virtual controller. Mouse compatible. 6 degrees of tracking ensures realistic movement. Bend sensors accurately detect finger movements. Easy plug & play set-up. Control characters & objects in 3D space. 3 games included: Hitman 2: Silent Assasin, Tiger Hunt, Beach Head 2002. Made by Essential Reality 99 8005798 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

FLIGHT FORCE

Unit hooks inline with most keyboard cables and provides 18 programmable functions. Can be used in conjunction with computer mouse for the ultimate in video game control. Great for flight sims, FPS's, sports games etc. 8000384 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

369

CLEANING KIT

PC GAMING PAD

Designed for cleaning the N64™ game console and the cartridges for it. Includes a variety of cleaning brushes and fluid. Suitable for many electronic cleaning applications. 99 8000454 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Features dual joysticks and directional pad plus front mounted and top mounted action buttons. Connects to USB port. 8006994 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CABLE

Originally for the N64™ game system to add rumble effects to control pad during gameplay. High/low settings as well as on/off. Great hobby items, contains many useful parts. 99 8058969 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

TREMOR PAK

6 ft. joystick extension cable. For standard PC game ports. O'all dim.: 9" x 4-3/4" x 2" 8002341 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399 EXTENSION CABLE

Originally a 6 ft. controller extension cord for the N64™ game console. Cord has heavy duty connectors with 28/3 ga. wire in between. Can be modified for other uses. 99 8000438 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BATTERY PACK

Unit originally clips to portable video game player and includes built-in battery pack and charger. Has many other uses. Includes charging adapter. 120 VAC input, 3 VDC @ 300 mA output. 8000399 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

2499 ACCESSORY KIT

3Com© digital PC camera kit. Includes 2 ft. USB cable, laptop clip, adapter and self adhesive pads. 99 8018227 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BREAKOUT BOX

For use with X-Box™ game console. Plugs directly into console and provides composite or S-Video out, stereo out and Toslink fibre optic out for digital surround sound. A must for people who use their console as a DVD player. Includes A/V and S-video cables. 8053278 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

CARD SCANNER

Originally designed as a credit card scanner. Unit consists of 16 key keypad. LCD display and 120 VAC to 9 VDC @ 200 mA output adapter. Contains many electronic components, great for hobbyists. 99 8019012 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CHARGER KIT

370

Plugs into 12 VDC cigarette lighter socket. Powers Palm™V and equivalent hand helds. 8000364 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

INFRA RED PICK UP

1499

Designed for receiving infra red signals. 8005506 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

COMPUTER CABLES and ADAPTERS

A) PRINTER CABLE – Heavy duty IEEE1284 printer cable. Originally for APC power back up units, but functions with printers too. Heavy shielding. Wt. 0.6 lbs. 8057112 – 6 FT. LONG . . . . . . . . . . . . . . . . . . . . . . 8057602 – 10 FT. LONG . . . . . . . . . . . . . . . . . . . . .

6 9

D) MALE GENDER CHANGER – Adapts connectors from 25 pin male to female. 99 0710004 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) ADAPTER – Adapts serial port to PS/2 port. Suitable for computer mice etc. O’all dim.: 4-3/4" x 3-3/4" x 1". 99 8016112 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . F) SERIAL PORT CABLE – 9 pin male to female computer serial port cable. 6 ft. long. Black. O’all dim.: 9" x 7" x 1/2". 99 8016103 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) COMPUTER CABLE – 53" long computer cable. 25 pin female to 15 pin male. 99 0710044 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99 99

B) NULL MODEM ADAPTER – B25 male to DB25 female null modem connector. Makes direct cable connection of 2 computers a snap. O’all dim.: 12" x 4" x 2". 99 8017237 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) PRINTER CABLE – Parallel printer cable. 25 pin male to 36 pin male. 6 ft. long. 99 0710180 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2 7

2 4 2

Cat-5 is a cable quality spec, whereas RJ45 is the style of jack attached to the cable.

CAT-5 CABLES

H) COMPUTER CABLE – 8 ft. long. RJ45 cable. For use with high speed networks, etc. 99 8002568 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . I) COMPUTER CABLE – Cat-5 patch cable 3 ft. long, made by IBM. Compatible with 10+100 base networks and high speed internet. Grey 99 8049104 – Wt. 0.3 lbs . . . . . . . . . . . . . . . . . . . . . . . . .

2 3

J) COMPUTER CABLE – 6 ft. long cable with RJ45 jacks on both ends. Suitable for ethernet or broadband connections. O’all dim.: 5-1/2" x 1-1/2" x 1" 99 8024602 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

K) SEMI-TRANSPARENT CAT 5 CABLE

Cat 5 enhanced ethernet/network cable. For high speed connections. Snagless boots. Wt. 0.3 lbs

8003213 – 6 ft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8003231 – 10 ft. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499 799

CABLE

IEEE 1394 firewire cable, 12 ft. long, 4 pin to 4 pin, transfer speeds up to 400 Mbps. 8002630 – Wt. 0.5 lbs.. . . . . . . . . . . . . . . . . . . . . . .

USB CABLES

Pack of 2 USB 2.0 cables. 6 ft. and 10 ft. long. Up to 480 Mbps transfer speeds. 8002352 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

IEEE CABLE

Digital cable, firewire and I- link compatible. High speed transfer, 400 Mbps 1394 standard. 6 ft. long, 4 to 4 pin 8010289 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

CABLE

1499

IEEE 1394 firewire cable. 400 Mbps 4 pin to 6 pin. Gold plated. Cable is oxygen-free copper for improved signal transfer. Made by Acoustic Research. 99 8005304 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

371

LARGE HEATSINK

RJ11 CRIMPER

Attaches modular plugs to 2 or 4-conductor telephone wire. Strips and crimps. Made by Recoton. 8004951 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

Aluminum construction. Large surface area for maximum cooling effectiveness. O’all dim.: 9-1/4 x 4-1/2 x 1/2" 99 8007211 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

COOLING FANS

A) HEATSINK FAN – Mini heatsink fan for use with small electronics, PCs etc. 12 VDC, 0.07 amp draw. Cool green coloured heatsink. 99 8002941 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) MINI 7-BLADE FAN – Mounted on thin aluminum heat sink with shroud. O’all dim.: 2-1/4" x 2-1/4" 99 0770202 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) FAN WITH HEATSINK – Intel© computer processor fan with heatsink attachment. Fits Pentium4™ processors. Fan itself measures 75mm, 7 blade, 12 VDC operation. Direct replacement unit or keep a spare on hand. 99 8048178 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

4 4

D) 7-BLADE FAN – 0.22 amps, 7-blade, 2" fan. Stainless steel heatsink surround with flat machined surface. 99 0770221 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) BLOWER – Nidec Gamma 30 mini blower. 12 VDC operation, 0.65 amp draw. Great for cooling electronics, small electric motors etc. Includes third monitor wire for PC use. 99 8002922 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . F) CPU COOLING FAN – With attached aluminum heatsink. 12 VDC, 0.9 amps, brushless, 2.9 CFM approx. pulling air movement on to heatsink. O’all dim.: 2-7/8" x 2-7/8" x 1-1/2". 99 8032602 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) FAN – 12 VDC input, 7 blade, includes Molex style pass thru connector, 3-1/2" x 3-1/2". 99 8032577 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

14 7

CAMERA MOUNTS

ABS construction tilting camera mount. Beige. Standard thread for cameras, speakers etc. Wt. 0.4 lbs.

8049391 – 7-1/2" long . . . . . . . . . . . . . . . . . . . . . . . 8049373 – 6-3/4" long . . . . . . . . . . . . . . . . . . . . . . .

499 999

AIR BOX

372

Assorted vehicle air boxes. Great as add on filter for machinery etc. 8005032 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

TACHOMETER

4,000 RPM. Originally out of a Ford diesel 8006225 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

STEERING LINK

2999

Assorted styles & sizes for different vehicles. 8006237 – Wt. 3.9 lbs. . . . . . . . . . . . . . . . . . . . . .

2999

TRIMMER HEADS

BLADE KIT B

A) TRIMMERHEAD – “Tap-n-go” trimmer head. Pre wound with 5-sided line. 11,505 RPM max. O’all dim.: 5" x 4" x 2-1/4". 99 8014212 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) TRIMMERHEAD – Sears© brand name weed trimmer line. Mounted on plastic spool. 0.080" dia., 40 ft. on spool. 3-1/8" spool, 1-1/4" high. O’all dim.: 4" x 4-3/4" x 1-5/8". 99 8014436 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

7 4

WEED BLADE

Replaces existing line spool on heavy duty weedeaters. Cuts through dense weeds and small shrubs. 8" dia. 1" dia. bore, 10,000 RPM max. Blade is reversible. Fits most Poulan© and Weedeater© models. Not recommended for eletric or curved shaft units. 99 8014187 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TRIMMER LINE

Assorted small spools of trimmer line. Different lengths on every spool. Sorry, not available through mailorder, see your nearest Princess Auto store for best selection. O’all dim.: 7-1/2" x 7-1/2" x 2". 8012615 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Heavy duty blade kit for weedeater. Features 20 mm, 10,000 RPM cutting blade for dense weeds and shrubbery, heavy duty blade hood with hardware. Fits most heavy duty weedeaters. Not recommended for small gas powered or electric units. O’all dim.: 10-1/2" x 7-1/2" x 10-1/2" 99 8014221 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

TUNE UP KIT OIL FILTER

GENERAC 1323-0. 8000102 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

SPEED SENSOR

Originally from a Ford. For the hobbiest, contains many useful components. 8000693 – Wt. 0.1 lbs.. . . . . . . . . . . . . . . . . . . . . . .

Kit includes air filter, spark plug and tools needed to do a tune up on your gas engine. Increases performance and efficiency by replacing key components. For use with 11, 13 and 15 HP OHVI Briggs and Stratton engines. 99 8038919 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . Includes air filter, spark plug, plug socket and adjustment wrench. Fits 6.5 and 7.8 HP OHV Briggs and Stratton engine. 99 8038759 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

4 4

499 CONDENSER

MOWER BLADES

Heavy duty built riding lawn mower blade. 21" long, 2-3/4" wide, coated finish. 8031505 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

STARTER CORD

Replacement starter cord for small gas engines with 1.8, 1.9, 2.0, 2.1, and 2.3 cubic inch displacement. Includes “T” handle. O’all dim.: 4" x 1-5/8" x 4-3/4". 99 8014230 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Heavy duty condenser unit from a Volvo heavy truck. O’all dim.: 44" x 18-1/4" x 2" 8050306 – Wt. 17.5 lbs. . . . . . . . . . . . . . . . . . . . .

4999

TUBE MECHANISM

Originally for an EGR system. Includes flexible stainless steel tube with pipe fitting. 8000578 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

WATER PUMP EGR VALVE

For Ford Taurus and Sable cars. 8016014 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

Fits Dodge/Plymouth 79-89. 2.6 L engines by Mitsubishi. Model # WP1077. 8042637 – Wt. 7.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999

373

HOUSE NUMBERS

PULLEYS

A) PULLEY – 3/4", bronze. Swivel eye, single

sheave. O’all dim.: 5-5/8" x 2-5/8" x 1". 3890991 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) PULLEY – 1" dual rigid brass pulley. 1/4" I.D. rigid eyelet. Fits 3/16" dia. ropes. 8038081 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) PULLEY – 1" swivel dual pulley. 8004068 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299 299 229

5" hammertone antique brass plated finish. Includes mounting nails. Highly visible designer shaped. Durable construction. Wt. 0.1 lbs.

8045821 – #1 8045812 – #3 8045714 – #5 8045830 – #7 8045741 – #9

8045750 – #2 8045723 – #4 8045803 – #6 8045787 – #8 8045778 – #0. . . . . . . . . . . . . .

299

WIRE TIES

CABLE/ROPE PULLEYS

Pack of 25 natural wire ties. 23-1/2" long, 3/8" wide. 8003274 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

D) MARINE GRADE PULLEY – Rope style

1-1/2" single fixed bronze pulley. O’all dim.: 5-3/4" x 2-3/4" x 1-1/2". 3800636 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) 3-3/8" PULLEY – Poly construction, 9/16" bore. Fits 1/4" dia. cables. 3890705 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

299 BELT

899

Originally used in treadmills. Serpentine. Measures 22-1/4" x 1/2"w 8051653 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PULLEYS

bore. Fits shafts with keyway. Comes with set screw. O’all dim.: 5-1/2" dia. x 1-3/4". 99 3840161 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . G) V-TRIPLE GROOVE PULLEY – Originally from an automobile. O’all dim.: 5-9/16" dia. x 2-13/16". 99 3840160 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

12 14

499

H) ALUMINUM – 4" dia. pulley. 1/2" bore with heavy duty set screw. Fits 1/4" V belts. 99 3840156 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . I) ALUMINUM V-BELT PULLEY – For use with belt size “A”. 3-1/2" dia. 5/8" bore. 49 3840136 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . J) COG PULLEY – Steel construction. 7/16" keyed bore. 2-1/8" dia. 99 3820055 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 2 2

SOLID RINGS

Assorted sizes, styles and finishes of welded ring. O’all dim.: 5-3/4" x 2-3/4" x 1/2". 3800589 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

BELT

Heavy duty serpentine belt. OEM motorcraft #1520. 8000581 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99¢

999 ANCHORS

IDLER

374

All steel construction pulley. O’all dim.: 2-3/4" dia x 2" w. 8027315 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

Pack of 100 plastic drywall anchors. Red, accepts standard drywall screws. Allows greater load than screws alone. O’all dim.: 4" x 2" x 3-1/8". 8037698 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

349

SCREWS

#10 screw. Phillips head. Self drilling tip. 5/8" long. Pack of 13. For sheet metal applications. 3890428 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

HANDLE

29¢/pkg.

Aluminum handle with knurled grip section. Handle is 12-1/2" long with built in spring. 8042664 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

899

HANDLE

LATCH

2-way latch assembly. Catches on both sides. Fits square shaft handles and knobs, etc. 8042593 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499

HINGES

Recessed style hinges with mounting screws. Pack of 2. Useful in the kitchen, garage, shop or practically anywhere. 8000598 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

Pull handle with mounting screws. Great for shops, kitchens, boxes etc. Brass finish. 8060518 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

89¢

KNOB SET

Polished brass door knobs with threaded shaft. Great for cupboard doors, drawers, shutters etc. 8060368 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99¢

HANDLE

Pack of 4 poly handles with threaded mounting stem. Each handle measures 3/4" by 4-1/4". 8037778 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HINGE

“T” hinge Pre-drilled mounting holes. Wt. 0.6 lbs.

8002264 – 6", black finish. . . . . . . . . . . . . . . . . . 8002263 – 5", zinc finish. . . . . . . . . . . . . . . . . . .

199

499

399 299 LOCK For use on sliding windows with sash type lock. 8002099 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

249

HINGE

“T” style hinge, 2" long. 8002274 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢

High security add-on window lock with 2 keys. 8002094 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

PIANO HINGE

Stainless steel pin. O’all dim.: 1-1/4" w x 48" l 8006023 – Wt. 1.4 lbs.

699

1999

CATCH

Magnetic cabinet door catch. Dual mounting options. Pack of 5. 8042646 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

249

LOCK

Originally designed for locking patio doors. Has many other uses. Includes 2 keys. Quality construction. 8060545 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

MAGNETS

Pack of 100 assorted magnets. Great for fridge magnets, crafts, shop projects, etc. Average pull power magnets. O’all dim.: 6-1/2" x 4" x 1-1/2" 8015630 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

WINDOW LOCK

399

LOCK

Slide lock with slide bar and catch. Designed as an extra security lock for the traveller, hotel dweller, etc. Includes 2 keys. 99 8059968 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

375

CLIP KIT

Pack of 2 cable organizer clips. Mount with double sided tape. Clips are 1-3/4" long and fit cables up to 1/4" dia. ¢ /pr. 0710166 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

NAILS

8D construction nails. 2-1/2" long. 8 oz. package. Great toolbox item. 8049872 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 8 oz pack of 3-1/2" nails, 16D, great tool box item. 8049890 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199 199

HOOKS Metal “S” hook, pack of 2.

8024256 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

149/pr. DRAWER SLIDE

24" drawer slide extends to 43". 2" wide. 3890329 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . .

HOLD A TOOL

Holds brooms, mops, bats etc. Max 25 lbs. per hook. Designed to hold things other brackets can't. O’all dim.: 11-5/8" x 3-3/4" x 1". 99 8027342 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

ROLLER

11-7/8" long. 7/8" dia. 1/4" shaft 3890537 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HARDWARE PACKS

Assorted styles of small hardware packs. Screws, washers, nuts and bolts etc. Sorry, not available by mailorder, see your nearest PAL location for best selection. Great toolbox item. ¢ 8014347 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

HOOKS

Hang all hook. Scissor-like grabbing action tightly holds brooms/shovels etc. Uses their own weight to hold them securely in place. 8036626 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1499/ea.

499

HARDWARE

1-1/2 lbs. of assorted hardware. Includes screws, bolts, nuts, washers, and other miscellaneous items. Great for the farm, shop, garage, or hobbyist. Packed in a reusable clear snap shut plastic casing. 8026922 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

BRACKET

Under shelf bracket with closet rod holder. Add a clothes rod to existing shelves etc. Box of 20. 8060377 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

BRACKETS

1499

SHELF BRACKETS

376

Pack of 2 shelf brackets with mounting hardware. Heavy gauge steel for heavy duty shelving. O’all dim.: 9-3/4" x 2-1/2" x 1-3/8". 8005419 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

Steel “L” brackets in 2 sizes. Make your own shelving. Includes mounting screws etc. O’all dim.: 8-1/2" x 3/4" x 6". 8021311 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

BRACKET

99¢/pr.

Includes various brackets, screws and bolts. Originally for mounting plant boxes etc. Has many other uses. O’all dim.: 6" x 5" x 1/2". ¢ 8021295 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

WIRE

TUBE

Aluminum tube with elasticized cord inside to keep tubes from separating. O’all dim.:1" dia. x 39-1/2" long. 8002823 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

179

U BOLT

Heavy duty U-Bolt with bottom bracket and fastening nuts. 3-3/4" max. pipe dia. 3890943 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Vinyl coated 3/32" x 25 ft. long wire rope. 8057461 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

WIRE ROPE

3/16" x 20 ft. 8057345 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

HOOKS

Pack of 5 steel “J” hooks. Fits strapping up to 1-3/4" wide. Can also be used with chain. Great for cargo beds etc. O’all dim.: 5" x 3" x 5-1/2". 99 8032005 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . /pkg.

U-BOLT with NUTS

For mounting leaf springs to axles. Includes nuts. Heavy duty construction 8001491 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

DUTY 299 HEAVY CHAIN LINK

For proper usage, needs to be hammered together then welded. Assorted sizes. Please see your nearest PAL location for best selection. 8005257 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ROPE CLIP

Crimp-on rope clamps. Use for making loops or joining two ropes together, etc. For use with 3/8"to 1/2" dia. ropes. Zinc construction. 8003167 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

199

49¢ A

BROOM HANDLE

48" with threaded end. Metal construction. 3810063 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

CLAMP

Originally designed for mounting antennas. Fits a wide variety of pipes from 1" to 2-3/8". Dual sided. O’all dim.: 5" x 2-1/2" x 2-1/2". 8020465 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A) SLIP HOOK – 1/2", grade 30. 8003264 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) GRAB HOOK – 1/2", grade 30. 8003263 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

449 399

STRAP HOOKS * Vinyl covered

RATCHETING MECHANISM

Contains a string and ratcheting device rated for 1 to 5 lbs. Bracket is mountable and has a fairlead to reduce string wear. O’all dim.: 6"L X 1-3/4"W X 2-1/2"H. 3800147 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CHAIN HOOKS

Strap size 1" 1"

O’all dim.

Wt. ITEM PRICE (lbs.)

2-1/4" x 1-3/4" x 1-1/2" 0.1 3800163 0.69 2-1/4" x 1-3/4" x 1-1/2" 0.1 3800164 0.99

RESISTANCE SHOCK

199

Originally from a rowing machine. Has full resistance on the extension stroke, spring return on the return stroke. 5/8" pinholes. 17-1/2" mounting length. 99 4212676 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

377

RUBBER HANDLE

MOUNT

1" I.D., 18" long. 5330034 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

Rugged poly motor base with rubber antivibration feet. O’all dim.: 7-1/4" x 5" x 2". 3891012 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

299 GRIP

Pin features plastic handle, steel shaft. O’all dim.: 6-7/8" x 3/8" 3890445 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

RUBBER FEET

Pack of 20 assorted rubber feet. Great for chair and table legs etc. Off white colour. 8025497 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

199/ea.

Foam grip. 1" I.D. 25" long. 8003123 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

24" FOAM GRIP

8003143 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

/pkg.

THREADED KNOB

Black plastic knob. Fits splined 3/8" shaft. O’all dim.: 3" x 2". 3890443 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499

ANTI-FATIGUE MAT

99¢

Heavy duty foam mat. O’all dim: approx. 2 ft. x 3 ft. 3890895 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

PAD

Made by 3M™, Used for polishing waxes, glazes. Washable, reusable, 5-1/4" dia. 8060199 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

149 PAD

Foam rubber pad, 7/16" thick. 10" x 5", self sticking pad. Great for toolboxes, vibration pads, etc. 8003561 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FOAM BUMPER

Tube foam bumper with centre groove. Great for hose reels, air lines, etc. Pack of 5 bumpers. Each bumper measures 2-1/2" x 1-3/4". 8027039 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HUB CAP CABLE LOCKS

8031550 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299 CAUTION TAPE

399

Assorted styles and sizes etc. Cautionary message tapes like “Wet Paint” and other messages. O’all dim.: 3-5/8" x 3-5/8" x 3". 99 8023809 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

Plastic. For Sale sign with section for phone number, address etc. Not designed for wet locations. Sign measures: 12" x 12". 8001213 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

HUBCAP LOCK KIT

378

Fits most 13" to 15" rims. Designed to lock and secure wire wheel hubcaps to the rim. Contains everything needed to lock all 4 wheels. O’all dim.: 11" x 7" x 1-3/8". 8009424 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

SIGN

29¢

DOOR STOP

Adjustable door hinge mounted door stop. Suitable for doors where a regular door stop cannot be mounted. Protective rubber pads. Brass finish. 8000376 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CASTERS

Pack of 4, 3" with stem, 2 locking and 2 non-locking. 8003181 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

SWIVEL CASTER

CASTER

Heavy duty swivel plate caster suitable for use with large office furniture, etc. Dual 4" dia. wheels. 8048828 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Swivel caster, 5" x 1-1/2". 8002058 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

1299

699 HUB ASSEMBLY

Trailer hub assembly, 4-1/8" hub length, 1" tapered roller bearing, 4 bolt, 1,000 lb. cap. O’all dim.: 5-3/4" x 5-3/4" x 4-3/4". 2080152 – Wt. 5.7 lbs. . . . . . . . . . . . . . . . . . . . . .

2999

SWIVEL STEM CASTERS A) FURNITURE CASTER with LOCKS – Pack of 4 threaded stem furniture casters. Locks on 2 of the wheels. O’all dim.: 5" x 4" x 2-1/2". 99 8003974 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . /pkg B) FURNITURE CASTER with LOCKS – Swivel stem style dual furniture caster. Full chrome hood. 1-1/2" high wheel. ¢ 8036840 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

STEEL ROLLERS

1" dia. x 1-1/4". 3890059 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

249

WHEEL WHEEL

16" dia. stainless steel, spoked design. 8000257 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . .

1999

Stainless steel spoked rim. 8000262 – 28"dia. Wt. 7.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . 8000260 – 20"dia. Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2799 2199

WHEELS C D E F G

Type

Dia.

Width

Bore

Wt. (lbs.)

ITEM

Plastic Plastic Plastic Plastic Rubber

6" 7-1/4" 4-1/2" 8-1/2" 4"

1-1/2" – – – 7/8"

1/2" 5/16" 1/4" 5/16" 5/16"

0.3 0.4 0.1 0.5 0.7

2040126 8002987 8002986 8002985 8031792

PRICE 2.99 1.99 0.99 2.99 2.99

379

TEST LEADS

Pack of 5 pairs of test leads. 36" long. Ends have alligator clips with protective rubber boots. 99 8049417 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ALLIGATOR CLIPS

10 pack of 5 red & 5 black alligator clips. Clip without the protective covering measures 2-1/2" long. Jaws are 3/8" wide and open 3/8". Rated for 20 amps. 99 8005256 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

TEST CLIPS

Pack of 10 mini alligator clips suitable for making test leads, electrical connectors etc. Features crimp and screw terminals for attachment to wire. 99 8002958 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TAPE

A) AUTOMOTIVE PVC TAPE – Grey.

19 mm x 20 m. 8048114 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . A) AUTOMOTIVE PVC TAPE – Black. 1-1/4" x 140 ft. 8048043 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . B) DUCT TAPE – Grey. Large roll, 3" wide. 5330082 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

99¢ 199

1499

TERMINALS

Assorted sizes and styles of solderless crimp on connectors. Not available through mailorder, see your nearest PAL store for best selection. 8051163 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

TERMINALS

Pack of solderless crimp-on wire connectors. Female, 22-16 ga. 8002952 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

WIRE LOOM

Assorted styles of wire loom. Used to protect trailer and automotive wires from damage and weathering. 4211079 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

499

199 WIRE LOOM

Sold by the foot. White semi-clear spiral type wire loom. 3/8" I.D. 4210945 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

CABLE

Low voltage outdoor cable. Suitable for direct burial or surface runs. 50 ft. long, 16 ga. Great also for speaker cable, automotive uses etc. 8002178 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999 HEAT SHRINK TUBING

TRAILER WIRE

25 ft. long double shielded, spooled. 16/3 ga. Grey in colour. O’all dim.: 3-3/8" x 3-1/2" x 3-1/2". 8020090 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . .

4 pc. 3/8" dia. Shrinks up to half its diameter. 8004393 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

29¢

1499

BATTERY CABLE

380

49¢/ft.

Assorted, up to 60". Many different configurations and ends are available. 8001343 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BATTERY CABLES

499

Heavy duty battery cables. Assorted sizes, styles and configurations. 8001345 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999

FUSES

7.5 amp ATC fuse. 25 pack. O’all dim.: 3/4" x 3/4" x 3/16". 4211208 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FUSE BLOCK

699

Buss® brand tube style fuse holder. Rated for up to 700V and 30 amps. Ceramic body. 8036181 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

699

FUSES

50 amp, red. Pack of 10 Maxi™ fuses. 8057130 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

999

30 amp. 8 terminals (4 brass, 4 chrome). 8005760 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FUSES

10 amp. Pack of 10. 8002897 – Wt. 0.1 lbs . . . . . . . . . . . . . . . . . . . . . . .

249

199 FUSE BOX

SOCKET

Automotive OEM light bulb socket. 90° design. Originally for a Chrysler lamp. 8054721 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TERMINAL BLOCK

149

Assorted styles. Comes complete with some fuses and relays. 12 VDC. Great hobby item. 8006277 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

2499

FUSE HOLDER BATTERY TRAY

Fits standard automotive batteries. 8004439 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

In-line fuse holder for standard push fuses. Features rubber body with cap for all weather use 8059753 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

149

FUSE HOLDER HARNESS

Standard 4-pin trailer connector designed to easily tap into existing tail light wiring. No cutting or wire connectors needed. Fits Ford Explorer and Navajo. 99 8054758 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Standard fuse holder. 10 AWG wire. Includes rubber boot and cover. 8059860 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

TRAILER LIGHT KIT

“T” style harness taps into existing tail lights on vehicle and provides correct hook up for trailer. No more splicing wires or incorrect hook ups. Easy to install. Wt. 0.6 lbs.

TRAILER CONNECTOR

5 pin. 4 female & 1 male with leads. 8006090 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

999 999

THERMOSTAT

3 PRONG CONNECTOR

Pkg. of 5. 4210884 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

8054678 – Ford Bronco . . . . . . . . . . . . . . . . . . . . . . 8054918 – Ford Bronco II 87-91 . . . . . . . . . . . . . . .

299

Designed to control heating levels of automotive heated seats. Rated 80°C nominal opening temperature +/-5°. 99 8002978 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

381

BATTERY CLAMPS

Great for making test leads, replacing charger clamps, etc. Pkg. of 4. 4270188 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

LEVER

99 /pkg.

2-position stock with leads and connectors. Originally for controlling headlamps and signal lights but can be adapted to control other electrical devices as well. 99 8024201 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CLAMP

Heavy duty booster cable clamp with 4-gauge wire lead attached. Originally used on battery boosters. Black. 8018334 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499 B

AUTOMOTIVE SWITCHES

BOOSTER CLAMPS

Heavy duty, 600 amp. Wt. 0.4 lbs.

4270194 – BLACK 4270196 – RED ...............................................

279

1499

12V SIDE MARKER LIGHT

Amber. Includes wiring and hardware. O’all dim.: 4-1/4" x 2-1/4" x 1-3/4". 4211274 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) LIGHT COVER – Heavy duty interior/ exterior with clear acrylic cover. O’all dim.: 3-3/4" dia. x 1" deep. ¢ 4210943 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . D) LIGHT COVER – Clear plastic light cover with sealing gasket. 5" dia. 99 8042557 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

99 1

399 INTERIOR LIGHT CONSOLE

LIGHT

Interior light originally for Mercedes Benz Off/On/Door switch. 12 VDC operation. Clear lens. 8001741 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

LIGHT ACCESSORIES

LAMP

High quality OEM map/interior 12V light. Swivel eyeball style, push on/off. Includes bracket and bulb. Originally made for the Dodge Viper. 8048846 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

382

1499 1499

CABLES

Booster cable set with top post and side post compatible clamps. 12 ft. long, solid copper, tangle free design. O'all dim.: 11" x 9-3/4" x 3-7/8". 8003867 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

A) SIGNAL STOCK ASSEMBLY – Automotive OEM signal stock assembly. Designed for controlling turn signals, wiper blades and headlights. 8000564 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . B) SIGNAL STOCK ASSEMBLY – Automotive OEM signal stock assembly. Designed for controlling turn signals, wiper blades and headlights. 8000542 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . .

499

Originally out of a Chrysler vehicle. Tan in colour. 2 small storage compartments. Includes 2 lights with press on/off lenses. 8006241 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

LIGHT

Utility light for automotive trunk/ hood etc. has many other uses. 12 VDC. 8003718 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

12VDC. Amber lens, great for offroad use. High power output and rugged construction. H3 bulb. Anti-vibration mount and metal wire shroud. 8003947 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

1999 LIGHTS

LIGHT

12 VDC chrome off road light. Clear lens. 6" dia. Triple chrome plated housing. Rubber vibration mount. 12 VDC, 55 W, H3 halogen bulb. Fits 5/8" mounting holes. 4211118 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

Wide beam 12 VDC clear, fog, and cornering driving lights. Kit includes 2 lights, mounts, wiring, illuminated switch and instructions. 8003858 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . .

1999

FOG LIGHTS

55W halogen with a chrome finish. Includes switch, relay, and wiring. 8040176 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

XTREME SERIES FOG LIGHTS

2999

Halogen, 12 VDC. 55 watt. Includes, hardware, wiring, and switch. Wt. 1.5 lbs.

8000493 – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8000495 – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3499 2999

BLAZER FOG LIGHTS

XTREME DRIVING LIGHTS

55 watt halogen. Includes wiring switch and mounting hardware. Easy to install. 8002790 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

12 VDC includes all wiring, switch and mounting hardware. 99 8004645 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

LIGHTS FOG LIGHTS

12 volt, 50 watt. High intensity automotive bulbs. Includes switch, hardware and wiring. 8002511 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . .

1699

Racing series 12 VDC, 50 watt halogen driving lights. Includes mounts, 30 amp relay, fuse, illuminated switch, wiring harness and easy do-ityourself installation instructions. Can be mounted with included double sided tape for screwless mounting. 99 8043173 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . .

383

NIGHT LIGHTS

With swivel plug in. Approx. 2-1/2" tall x 2" wide. 0700373 – Owl 0700376 – Frog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LIGHT

99¢

SIGNAL LAMP

Side marker/signal lamp. One side features amber lens, the other side red. Steel housing, 12 VDC operation. 8003760 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Battery operated mini utility light. Has built in on/off switch. 8003759 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

INDICATOR LAMP

999

12 VDC operation. Green. Super bright, originally from Bus dashboards. Mounts into 5/8" hole. Black bezel. O’all dim.: 5" x 3" x 3/4". 4211196 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

LIGHT

Battery operated tap light. No wiring needed. Easy to install. Great for closets, RVs etc. 8002807 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199 LIGHT

Assorted styles and colours. 12VDC interior style light, includes switches. 8005054 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

LIGHT ASSEMBLY

Originally from a MTD lawn tractor. 12 VDC, clear lens cover 8006348 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

599 TRUNK RELEASE

POWER DOOR LOCK SETS

12 VDC automotive trunk release mechanism. Includes solenoid, pull cable, wire, and button. Easily add power release to your vehicle's trunk. 99 8059897 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . .

Easy to install. Compatible with auto security system and remote control kit. Lock/unlock by using key or front door lock button. Suitable for most vehicles. Wt. 2.5 lbs.

3999 2599 999

8008434 – 4 pc. (Pictured above) . . . . . . . . . . . . 8008443 – 2 pc. (Lock motors only) . . . . . . . . . . 8008425 – 1 pc. (Lock motors only) . . . . . . . . . . . .

ELECTRONIC IMMOBILIZER

Starter/vehicle shutdown device fits all cars. Automatically activated. Cannot be defeated from within the vehicle. Do-it-yourself installation. Quality construction. 99 8003911 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

CENTRAL POWER LOCKS

384

4 door central power lock system with pistol style lock motors and 2 single button key fobs for keyless entry. Kit includes central control system, wire, hardware and instructions for a complete install. Universal, fits most makes. O’all dim.: 10" x 2-5/8" x 7-3/4". 99 8018628 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . .

REMOTE

OEM factory key fob. Battery included. Designed for Ford programming instructions located in vehicle owners manual or from your local dealer. 8000971 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

2499

MIRROR

MIRROR BRACKET

Chevy/GMC side mirror mount bracket. Black in colour. ABS construction. Safety swing away design. Wt. 1.5 lbs.

8037536 – Right side . . . . . . . . . . . . . . . . . . . . . . . . 8037466 – Left side . . . . . . . . . . . . . . . . . . . . . . . . .

499 499

Rear view auxiliary mirror. Attaches easily to the front window 8003044 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Universal left or right side mount truck/van mirror. Mirror head measures 9-3/8" x 6-3/8". Swing away design for safety. Wt. 2.7 lbs.

999

MIRROR

8037581 – Chrome (shown) . . . . . . . . . . . . . . . . . 8037607 – Black . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chrome universal left or right mount mirror head. For trucks and vans. Head measures 9-3/4" x 6". ABS construction. 8037590 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2499 1699

99¢

MIRROR

Stick-on 3" dia. adjustable mirror. Apply to RVs, boats, automobiles. Adds extra visibility to existing mirrors or place anywhere a mirror is needed. 99 8059888 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

BRACKET

Dodge side mirror bracket. Chrome colour. Includes all hardware. Rust free ABS construction. Left or right side. 8037475 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

WINDOW TRACK

HOLDER

Pop-up dash board mount holder. Designed to hold a multitude of items. Spring loaded. 8043155 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

TRAY

Heavy duty design. Sliding mechanism for a car door window. 8012287 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

Self stick tape mountable automotive holder. Hold soda cans and other assorted items like change, spare keys etc. 8043146 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

HANDLE LATCH

Door latch mechanism originally from a Ford. Includes door handle, latch mechanism and pull cable for interior handle. 99 8000572 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . .

Black plastic window crank handle. Fits 1/2" hex shafts. 4" pin to pin. O’all dim.: 5-3/4" x 1-3/4" x 3". 3890698 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

HANDLE

Window crank handle for automobile. Black ABS construction. 8000859 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

DOOR PROTECTORS

1 pair. Universal front door applications. No drilling required. Accents your door stop area. 8005684 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HANDLE

499

Originally from a Ford Windstar. 8006228 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

385

WIPER WINGS

WIPER BLADES

Pack of 2 twin wiper blades. Includes adapters to fit most makes and models of automobiles. Dual wipers for increased wiping action and a custom look. 16" chrome. 99 8053205 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . .

Increases windshield wiper blade action using wind pressure. Pack of 2. 8002426 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

99¢

WIPER BLADE

22" Truckbuilt™ wiper blades include adapter to fit most wiper arms. Heavy duty steel frame. 99 8000810 – Wt. 0.6 lbs . . . . . . . . . . . . . . . . . . . . . . . .

WIPER BLADE

16" quality Wing™ wiper blade. Includes adapters to fit most makes and models. 99 8003746 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

WIPER EYES

Mounts on wiper arms. Lights up, 12 VDC. Great automotive accent. Includes wiring and connectors. 8018566 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

LICENSE FRAME

12 VDC illuminated license plate frame. Fits all standard license plates. Great accent item. A must for emergency type vehicles. 99 8003734 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

WINDOW FILM Wt. 0.3 lbs.

1299

CARGO NET

Assorted sizes, styles and tints. High quality automotive grade. 8003547 – 8003521 – 8003600 – 8003933 –

CARGO NET

For cars, trucks, or vans. Convenient storage system for your vehicle. O'all dim.: 49" x 12". 8005668 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

999 999 999 99 36" RV grade, assorted . . . . . . . . . . . . . . 9

Small rolls, black . . . . . . . . . . . . . . . . . .

Cargo net with bungee cord cinching device. 15" x 13". 8051822 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

24" rolls, assorted . . . . . . . . . . . . . . . . . . Chameleon colours . . . . . . . . . . . . . . . . .

CHROME VALVE COVER

DIFFERENTIAL COVERS

A) Chrome plated 10 bolt differential cover plate.

For use with Chevrolet 10 bolt rear ends. 99 8060661 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . B) Chrome plated 10 bolt differential cover plate. For use with Chrysler 10 bolt rear ends. 99 8060705 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . .

386

Fits most Chev. V-6s. 8009647 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

TRANSMISSON PAN

Chrome plated transmission pan with drain plug. Designed to fit Chevrolet “Turbo 350” transmissions. 8060698 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . . .

3499

FILTER

Automotive style. O'all dim.: 9-3/4" x 2.14". 8004240 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

RUNNING BOARDS

Sleek, maintenance-free extruded aluminum design. Provides protection from mud, salt, & stone chips. Stone guards, end caps, mounting brackets, & hardware included. Full size, cab length boards for full-size pick-ups. Fits 1973current full-size Chevy, GMC, Dodge, & Ford pick-ups. Also fits Dodge Dakota pick-ups from1986-current. 8005670 – Wt. 17.9 lbs. . . . . . . . . . . . . . . . . . .

499

10999 FLOOR MATS

2 piece set. Green and black racing style. 8004261 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . . . .

1999

AIR FRESHENER

Racing themed. 8004251 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

RUNNING BOARDS

Rugged, maintenance-free diamond tread design. Provides protection from mud, salt, and stone chips. Stone guards, end caps, mounting brackets, and hardware included. Full size, cab length boards for full-size pick-ups. Fits 1973-current full-size Chevy, GMC, Dodge, & Ford pick-ups. Also fits Dodge Dakota pick-ups from1986current. 99 8005660 – Wt. 18.0 lbs. . . . . . . . . . . . . . . . . . .

109

AIR FRESHENERS

Assorted foam shapes, characters, vehicles etc. Hangs from rear view mirror. 8003583 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

149

ALIEN AIR FRESHENER

BALL MOUNT

For 2" x 2" hitch, 3-1/4" drop, quick load angle, 1" mount hole. 5,000 lbs. trailer/500 lbs. tongue. Black finish. 8001156 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . .

149

2799

199

TRAILER BALL

TOW HOOK

O'all dim.: 12" x 4" x 2". 8005074 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Pine scent. Poke my belly & smell my freshness. 8003594 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TIE DOWN

1" x 6 ft. Fast tighten with quick release. Multi-purpose. Features a non-slip spring loaded cam buckle. 99 8005262 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1-7/8" x 3/4" trailer ball. Rated for 2000 lbs. Chrome plated. 8005417 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

599

TIE DOWN

2 piece. Fits most full size pick ups. Installs in siderail stake holes. Chrome plated anchor. 8005693 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

387

A) PADLOCK – 2 pc. 30 mm non-ratchet padlock

with 2 keys. 3-pin tumblers. Hard plastic body cover. Case hardened shackle 99 8060028 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) PADLOCK – 60 mm non-ratchet padlock with 2 keys. Hard plastic body cover with vinyl shackle cover. 99 8060046 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

3 5

C) PADLOCK – 40 mm non-ratchet padlock with 2 keys. Hard plastic body cover with vinyl shackle cover. 99 8060019 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) PADLOCK – 60 mm non-ratchet padlock with 2 keys. Hard plastic body cover with vinyl shackle cover. 6" shackle. 99 8060037 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) SHOTGUN SAFETY LOCK – For use with pump and semi-automatic guns. Adds an extra measure of safety to your guns. 99 8060064 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

6 5

COMBINATION LOCK

U-LOCK

1499

BOTTLE WITH PUMP

Originally a windshield washer reservoir with built in 12 VDC pump. Has many other uses. Great hobby item. 8002390 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

PADLOCKS

Made by MASTER©. For locking bicycles or other unique shaped items. Includes mounting bracket and 2 keys. 8002615 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

Standard caribeaner with combination lock built in. Setable to personal combination. Great for luggage and backpacks. 8002379 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

LOCK

2499

Master™ spare tire lock. Fits in place of lug nut and locks spare tire to holder. Includes 2 keys. Chrome finish. 8046571 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

PLASTIC CASE

Originally for video game cartridges. Rental store quality. Semi-transparent. Outer sleeve holds paper for labels. O’all dim.: 7-3/4" x 5-3/8" x 1-1/4". 8002733 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

BIN

49¢

STORAGE BOX

388

2 pack of storage boxes. 6 compartments. Rugged plastic. Great for small hardware storage. Measures 4-1/4" x 2-3/4" x 3/4". 8003585 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Rugged ABS storage bin with drain holes. Great for hardware storage etc. O’all dim.: 9-3/4" x 5-5/8" x 2-1/2" 99 8003958 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TOTE

199

Heavy duty hardshell ABS construction cargo tote. Interlocking lid. Measures: 9" x 9" x 7". 8004052 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

RADIO CASE

Genuine Motorola radio case with belt loops, front pocket and leather cover. Fits larger 2-way and CB radios. Black. Heavy duty construction. O’all dim.: 9-1/2" x 2-1/2" x 4-7/8" 8025718 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

POUCH

1999

699

HOLDER

AMMO BOX

Heavy duty steel army surplus ammo box. Makes a great toolbox or storage container. O'all dim.: 11-3/4" x 6-1/4" x 7-1/4". 8023569 – Wt. 5.7 lbs. . . . . . . . . . . . . . . . . . . . . .

Leather tool pouch. For holding hammer and tape measure or other assorted tools. Quality construction. 8002810 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Pack of 4. Fits standard belts. Holder opening measures: 1-1/2" x 1-1/2". O’all dim.: 9" x 3" x 2". 99 8005605 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . /pkg.

1299 DUFFEL BAG

CONTAINER

Black plastic tube with snap tight lid. O'all dim.: 2" dia x 3-1/4"H 8013357 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Army surplus large duffel bag with shoulder strap. Originally for camouflauge screening. Heavy duty design is great for sporting goods, camping, hunting, etc. 99 8040559 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

FANNY PACK

Brand name Motorola© fanny pack designed for carrying cell phones, charger, accessories, etc. Stylish design and many pockets make this pack useful in any situation. 99 8040639 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CORD

Bungee style cord with hooks on both ends. Adjustable length, 10"-36". 8003719 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Quality built chest with clasp and handle. Great for storing collectables, small unique tools, hobby items, etc. O’all dim.: 9-3/8" x 6-1/8" x 6-1/4". 8002187 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

PACK

BACKPACKS

Assorted styles, well built. Great for work, school, hiking, etc. 8001517 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

TIN CHEST

Sport fanny pack for use with CD players. 8003550 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

BULK ZIPPERS

299

Finally a bag of all steel zippers in all styles to replace that worn out broken zipper. Different mix in every bag. 8036859 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

389

BUCKLES

D) PLASTIC BUCKLE – Use with 3/4" strap. O’all dim.: 2" x 1" x 2-1/4". 29 5330065 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . E) POLY BUCKLE – Fits 1-7/8" strapping. O’all dim.: 6-1/2" x 2" x 5-1/2". 2 pk. 99 3890553 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . /pkg.

SWIVEL SNAP

STRAPS and SLINGS A) 4 FT CARRYING STRAP

With 4" dia. pouch. 99 3800149 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) 6 FT VINYL STRAP – With snap hook on each end. 1-1/4" wide. 99 3800145 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) SLING with STRAPS – Approx. 4" wide x 3" dia. Strap adjusts to max. of 45" long. 99 3802683 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SNAP HOOK

3/8", swivel, round eye. 8005223 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢

Snap clip with swivel base. Can be attached to strapping or chain. Brass finish. 8003163 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

CLIP KIT

Plastic strap clip with “D” ring. Pack of 4. Fits up to 1-1/4" strapping. Good for duffel bags, back packs, luggage, etc. 8035609 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

SNAP HOOK

Dog chain clasp with leather strap and key ring. 8001214 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

199

SNAP HOOK

Swivel bolt snap. 8005220 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

149 SNAP HOOK

3/4", rigid, strap eye. 8005206 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

SNAP HOOK

Spring snap swivel. 8005228 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢ LINK

1/4" connecting link. 2 pk. 8005230 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SNAP HOOK

Strap eye spring snap, 5/8" 8005232 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

69¢

390

LEVER

Caliper brake lever for a bicycle. Accepts standard pull cable with small diameter cabling. O’all dim.: 5" x 3-3/8" x 2". 8011180 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢

BIKE SEAT

RACK

White vinyl coated metal rack. Curved edges. Rack dimensions measure 18" x 15". 8027119 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

499

Poly seat with padded cover. Adjustable mount fits standard 1" O.D. seat posts. O’all dim.: 10-1/2" x 6-1/2" x 5". 8031774 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

QUICK PAINTER

Makes trimming and cutting-in fast, easy and neat. Load handle with paint straight from the can. Trims 50 ft per fill. Just pull the trigger to load the pad and paint. O’all dim.: 16-1/2" x 7-1/4" x 1-7/8". 99 8026968 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CABLES

A) PULL CABLE – 56" long pull cable. Spring hook end. 99 3840159 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) THROTTLE CABLE – General purpose control cable. 4 ft. long. 49 3840037 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) PULL CABLE – Adjustable pull cable. Cable measures: 44-1/2" long. Take up is approx. 3/4" in precise increments. Comes with cap. 99 3890521 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) PULL CABLE – Vinyl sheathed steel pull cable. 35-1/4" long.7" long pull. Originally for a lawnmower. 99 3890708 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2 1 3 2

WALL PAPER KIT

Includes water tray with dual rollers, easy measure cutting edge, seam roller, knife, wall brush, video guide and quick mask drop cloth. 99 8046376 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . . . .

CUTTING GUIDE

Originally designed for wall paper application. Eases install by allowing accurate length cuts, also allows cuts not to effect drywall underneath. Great as a straight edge or marker. Plastic bracket with steel edge. 23" long. O’all dim.: 27" x 8" x 2" 99 8027048 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CABLE

Assorted lengths and styles. General purpose throttle cable. Sorry, not available through mail order. 8050388 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SPATULA SET

699

SCRUB BRUSH

Nylon bristle scrub brush with plastic handle. Great for farm, auto, marine cleaning. O’all dim.: 7-1/2" x 2-3/8" x 1-3/4" 8003144 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

5 pc. assorted plastic spatula set. Great for painters, kitchens, body work, sculpting, hobbies and crafts. 8002826 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

PLASTIC BAGS

Super heavy plastic bags ideal for heavy trash or prolonged item storage. Super large size.

299

RULER

12" class-glow style. Made by Fiskars™ 8003429 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

GLOVES

Wt. 1.1 lbs.

5330078 – Blue. 59" x 31" x 62-1/2". 5330079 – Clear. 60" x 30" x 71". . . . . . . . . . . . . .

89¢

E) RUBBER GLOVES – 12 pack. Industrial grade. 99 8006355 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . . F) RUBBER GLOVES – Size: 8 to 8.5 (large). 99 8022276 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) RUBBER GLOVES – Gauntlet length. Great for kitchen cleaning and light shop duties. Gripped palms and finger tips. Medium. 49 8036519 – Wt. 0.2 lbs . . . . . . . . . . . . . . . . . . . . . . . . .

29 1 1

391

PIPE REPAIR KIT

Assorted exhaust pipe repair kits, permanent and easy to install. Repairs holes or broken pipe. O’all dim.: 17" x 5" x 2". 99 3891022 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

PILLOW BLOCK

Pillow block bearing with mounting bracket and bolts. 3/4" bore. Oil cap. 8031961 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

TIE-ROD

WRENCH

Portable emergency sparkplug wrench. Keep 1 on the snowmobile, ATV, motorcycle, boat, etc. Folds up for easy storage. 8025433 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

5/8" dia. steel rod with a ball joint at each end. O’all length: 12". 99 3870034 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299 DRILL CHUCK

3/8"-24 Jacobs© drill chuck with included chuck key. Great replacement item. 8048800 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ADJUSTABLE EXTENSION

3/8" drive adjustable extension, quality built mechanism. Changes length. 8002624 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢ WRENCH

Chrome plated. 6 sizes. Great tool box item. Metric: 13 mm to 18 mm. O’all dim.: 3" x 3" x 1/4". 2920968 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

WRENCH

12" long adjustable wrench. 8049989 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

WRENCH

Socket fits 1/2" and 9/16" nuts and slides along a 6-1/2" long bar. 2910292 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

999

99¢

199

HOTPATCH CLAMP

Originally for applying and setting hot patches. Makes patching easier. Can be used as a clamp for a variety of items. 8001349 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

199

EMERY CLOTH

Assorted grits of emery cloth: fine, medium, and coarse. 1-1/2" wide by 180" long. Sorry, these items are not available by mail. Visit your nearest Princess Auto location for a full selection. 99 2970211 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

VISE

High quality miniature Pony™ vise. 3-1/2" jaws, swivel base and anvil built in. Great for hobbyist, crafters, or technicians. 99 8003711 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

SANDING ACCESSORIES

STONE PACK

392

Assorted sharpening stones sold in 5 lb. bags. Everything from grinding bits for drills to knife sharpening stones etc. Great for the hobbyist, crafter, etc. O’all dim.: 10" x 3-1/2" x 7". 99 8036751 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . . . . .

Assorted sizes, styles and grits of sanding products. Sorry, these items are not available through the mail. Visit your nearest Princess Auto location for a full selection. 3410580 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . .

1999/pkg.

PIPE GAUGE HEMOSTAT CLAMP KIT

Pack of 2 locking clamps. Forcep style. Adjustable. 8016327 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

5" HEMOSTAT

Available in straight jaws or curved jaws. 8005243 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Measures male and female pipe thread sizes 5/16" to 1" and 1/2"#14 to 3/4"#14. Includes brass fittings gauge and tube fitting thread sizes. O’all dim.: 9-1/2" x 5-3/8" x 1/8". 99 8017665 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SCREW and

229 BOLT GAUGE

MOUNTS

Assorted suction cup mounts with hooks and other gadgets. 10 pack. Sorry, not available through mail order. See your nearest PAL location for best selection. O’all dim.: 6" x 4" x 4". 99 3891005 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . /pkg.

Determines bolt and screw size for #2 to #12 machine screws and 1/4" to 1/2" bolts in coarse and fine thread. 4-3/4" ruler on one edge. 99 3430002 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HAMMER KITCHEN SNIPS

Includes safety holder. Easy one handed operation. Great for cutting bones, meat etc. Quality construction by FISKARS® 99 8003369 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Large heavy framing hammer. Milled face and extra long claw. Solid wood handle. O’all dim.: 13-1/2" x 6" x 1-1/4". 8026021 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

HAMMER HANDLE GRIPS

Red rubber, for use on fibreglass hammer handles. Size 1" x 1-1/4" x 5" 1" x 1-1/2" x 7"

GAVILAN HAND SAWS

ITEM 5330036 5330037

PRICE 0.29 0.99

Wooden comfort grip handle. Aggressive teeth for fast cutting. 8005163 – 18" Wt. 0.7 lbs. ................................ 8005165 – 20" Wt. 0.9 lbs. ................................ 8005171 – 22" Wt. 1.1 lbs. ................................ 8005178 – 24" Wt. 1.1 lbs. ................................

1599 1699 GLUE STICKS 1799 12 pack. 5/16" x 4". 79 8005449 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 1 1899

ACRYLIC PIECES

Multi-coloured, multi-sized acrylic shapes. Originally used for overhead projector projects. Great for crafters. 8041308 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

GLUE GUN

499

120 volt, 10 watts. For quick repairs. Requires 5/16" glue sticks. 8005432 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

393

CHAIN SAW CASE

POLISHING KIT

5 piece. Includes 3 buffing wheels, mandrel a, red rouge and white diamond compound. 8006629 – Wt. 0.5 lbs.

1299

ABS construction. Fits many 16" bar chainsaws. Slightly used but in perfect condition. Carry handle for easy portability. 99 8009754 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

MACHINIST SCRIBE

Heat treated precision steel points. 8-3/4" long. 2943215 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

SIGNAL PANEL 399 Army surplus quality signal

canvas. Orange on one side, pink on the other. 8040489 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

DEBURRING TOOL

Removes metal burrs on pipes after cutting, etc. Includes an assortment of tips for a variety of deburring jobs. 99 8003271 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

FASTENERS

Pack of 4 machine screws and acorn nuts. Used for attaching license plates but has many other uses. Rust resistant finish. 8031685 – Wt. 0.1 lbs.. . . . . . . . . . . . . . . . . . . . . . .

99¢

CALIPER

2-1/2" caliper/measuring tape combo. Tape measure up to 5 ft. O’all dim.: 6" x 3-7/8" x 5/8". 8005641 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

OIL CAN

Swingspout® 1 quart capacity oil can with bottom fed flex outlet tube. Works well in hard to reach areas. Lockable pour lever. O’all dim.: 13-1/2" x 11-5/8" x 5-1/2". 8031499 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

BRACKET

2 piece steel bracket with double sided tape lining. Comes with mounting bolts. Bracket opening is 2-3/4" x 5". O’all dim.: 5"L x 4-1/4"W x 2-1/8"H. 3890954 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

299 SPRAY BOTTLE

BARREL PUMP

Fits 5 and 45 gallon barrels, all ABS construction. Pumps a variety of fluids. Anti corrosion design, rugged build. 99 8002209 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

32 oz. Great for spraying cleaners, around the BBQ, gardening etc. Quality adjustable spray pump. 8005000 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

CLIPS

HOSE NUTS

394

Oxygen B hose nuts. Pack of 5. O’all dim.: 3" x 2" x 1". 0140305 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . .

129/pkg.

Pack of 2 magnet mount spring clips. Use on the fridge, file cabinet, etc. Great for home, shop, office, etc. 99 8049845 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

GAUGE

CORK WATER FLOAT

7/8" bore. Made of cork, great for fishing nets, as a bumper etc. 8003306 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

Spark plug gapper gauge. 020 to 080 plus 0.6 - 2 mm sizing. Pocket sized. Great tool box item. O’all dim.: 1-1/2" x 1-1/2" x 1/8". 2920984 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

GREASE FITTINGS Pack of 5.

GLASSES

Assorted styles and sizes of safety glasses. Not available through mailorder. See your nearest PAL location for best selection. 99 8000980 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

299/pkg. 99 8015088 – 1/8 PTF 45° . . . . . . . . . . . . . . . . 2 /pkg. 99 8015097 – 6 mm, assorted. . . . . . . . . . . . . 8 /pkg. 99 8015104 – 1/8 PTF 90° . . . . . . . . . . . . . . . 2 /pkg. 99 8015523 – .1/4" PTF. Qty. 4 . . . . . . . . . . 1 /pkg. 8015060 – 6 mm, 45°. . . . . . . . . . . . . . . . . .

GLASSES

Heavy duty glasses with side shields and tinted lenses. Fits over regular glasses. 8000876 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

ASSORTED

299 HELICOIL KITS

Kit repairs or replaces damaged threads. Sorry, not available through mail order. See your nearest Princess Auto store for best selection. Wt. 0.1 lbs.

8026094 – Assorted metric . . . . . . . . . . . . . . . . . . . . 8026101 – Assorted metric . . . . . . . . . . . . . . . . . . . . . . . .

DRILL BIT CASE

Holds 13 bits (not included) up to 1/4" size. Plastic. 3412988 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

199 199

25¢ FILTER WRENCH

Automotive oil filter wrench. Standard sized. Great tool box item. O’all dim.: 5" x 1" x 4". 2920964 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

399

BIT

1" hi-speed steel drill bit. 8003307 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

CHUCK

3/8" keyed chuck with key. Made by Jacobs. 8005964 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

SPONGE

All natural sea sponges. Does not build up bacteria like artificial sponges. Absorbs many times its weight in liquids. Great for the shop, kitchen, etc. Also great for artists and painters. 8002977 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

WASH ACCESSORIES

TAP and DIE SET

30 pc. Metric tap and die set. For 1 mm to 2.5 mm. Includes plastic storage case. 99 8024194 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . .

Assorted styles and types of wash mitts, sponges, scrubbers, etc. Great for farm, shop, garage, etc. Sorry, not available through mail order. Please visit your nearest PAL location for best selection. O’all dim.: 7" x 4" x 2-1/2". ¢ 3890976 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

395

CHARGER

Dual desktop style cell phone battery charger. For use with Motorola flip phones. 8002726 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BASE STATION

MOTOROLA FREE CHARGER

Emergency charger. Requires mechanical power to work. Insert battery and simply rotate handle continuously to charge. Charges cell battery but can be adapted to charge many different items. 8006833 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

For use with Motorola Timeport/Startac and equivalent. Works like a second phone line. Includes adaptor and phone cord. 8002659 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

HANDSFREE KIT

Luxury design Motorola cell phone handsfree kit. 8004735 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

HANDSFREE KIT

699

HANDSFREE KIT

For use with Nokia cell phones featuring a 3/32 phono jack handsfree connector. 8006892 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

396

Audiovox Caselog handsfree kit. 8004749 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

HANDSFREE KIT

Earbud style, for use with Nokia 8000 series phones. 8004648 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

699

CHARGER

Desktop dual cellular battery charger for Motorola. 8006854 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

499

HANDSFREE KIT

For use with Nokia 51/6100 series cell phones. 8006890 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

2999

999

ADAPTOR

Motorola cell phone adaptor, 3.6 to 4.8 VDC, 350 mA. Originally for use with crank charger 8006833. 8006881 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

HANDSFREE KIT

999

Earbud style, for use with Nokia 51/6100 series cell phones 8004647 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

SPEAKER WIRE with CONNECTING PINS

50 ft. high quality wire. Easy to connect mini pins. Wire has many other uses. 8005294 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . .

1699

ADAPTOR

Adapts composite RCA video cable to s-video style connector. Great for adapting DVD/satellite units to older stytle TV inputs. 8006665 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

SPEAKER

75 watt, dual cone speaker. 6" x 9". 8004774 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

1299

CONNECTOR

4 pin connector originally for use on speakers. Great for all sorts of low voltage connections like fans, lighting, etc. ¢ 8006880 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

SUBWOOFER

200 watt tube style subwoofer with built in amp. Easily add bass to factory or aftermarket stereos. Sub and amp in one convevient package. Carpeted enclousure for durability and great looks. 8007176 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

6499

CABLE

Monster Cable™ super high quality speaker cable. 20 ft. long. Gold plated pins and boots on each end. Has velcro strap for easy storage. Rugged enough for DJ or home theatre use. 99 8006978 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

SWITCH BOX

Selector switch box for digital optical sound cables. Fits toslink style connectors. 1 input, 3 outputs. 99 8006528 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

RELAY

12VDC universal design horn relay. 8004637 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299 MOTOR

120 VAC, 2 speed, 1.2 amp, 3000 RPM 8004629 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

MOTOR

120 VAC, 60 Hz, 0.8 amp, 3,000 RPM. 8004628 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

1699

METER

1299

0 to 300 VAC voltmeter. 8006548 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

397

LIGHT

Stop, tail and turn light assembly. For use on a trailers. Submersible. 12VDC. 8006377 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BATTERIES

Pack of two alkaline 9V batteries. 8003544 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

CARREL

Holds keyboard and mouse neatly below the monitor shelf. Great for the office. 8002345 – Wt. 20.1 lbs. . . . . . . . . . . . . . . . . . . . . .

999

LIGHT

Stop, tail and turn light assembly with license plate illuminator. Square. 12VDC. 8006449 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

599

LENSES

Pack of 2 replacement red lenses. 5" dia. 8006456 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

RIVETS

Short rivets. Pack of 200. 8007216 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CONNECTOR

Trailer bulb connector with wire leads. 8005505 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199 DRIVING LIGHTS

INSTALL KIT

High quality amplifier install kit. Includes everything you need to properly install a 200 watt car audio amplifier. 8006059 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

2499

1999

Glo-Fx driving lights. Feature cool after glow when lights are off. Includes all wiring, switch and mounting hardware. Easy to install. 12VDC. 8006386 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

LIGHT

12V license plate illuminator light. Chrome housing. 8006391 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

NEON LIGHTING

398

Quad neon style neon light originally for use on roller skates but has many other decorative uses. Powered by 9V battery (included) Asst. colors available. 8007363 – Wt. 0.7! lbs. . . . . . . . . . . . . . . . . . . . . .

NEON LIGHTING

1499

Tube style neon lights originally for use on roller blades but has many other decorative uses. Dual 8” long tubes are powered by 9V batteries (included) Asst. colors available. 99 8007365 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

LIGHT

Red clearance light with metal protective housing. 8006390 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

CONNECTOR

5 pin male trailer connector. 8006091 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499 CHAINSAW

Poulan 20" farmhand chainsaw. 46 cc with auto oiler and chainbrake. Antivibration design. 8006527 – Wt. 14.9 lbs. . . . . . . . . . . . . . . . . . .

GAUGE

Made by Sunpro. Features 2-5/8" gauge for oil pressure 0 to 100 PSI reading 8006499 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

18999

1799 UTILITY BLANKET

AIRCRAFT CABLE

1/8" x 50 ft. long. 8003310 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

699

12" x 48". Excellent all purpose gap and void filler. Helps reduce heating and cooling energy losses. Can also be used as a sound deadener. Totally itch free insulating material. 8006316 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

WIRE BRUSH

Stainless steel bristled wire brush with wood handle. 4 X 16 rows. 8007279 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499 FOG LIGHTS

12 VDC 55 watt halogen fog light system. Projector style. Includes all wiring, switch and mounting hardware. 99 8007322 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

HARNESS

Wire harness makes installing car stereos easy. Model #: LR905-376. 8001584 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Made by Liteglow. 12 VDC operation. Originally designed to be mounted in the headlamp housing on newer style cars, creating a color glow when headlamps are off. Lights can be used anywhere and are easy to mount and wire up. Pair.

LIGHT

Utility tractor light. Halogen work light. 12 VDC, 55 W, H3 halogen bulb. O'all dim.: 3" x 5". 8002496 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

LIGHT

Wt. 0.1 lbs.

8007352 – Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8007354 – Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899 899

399

ADAPTOR

Plugs into cigarette lighter plug. 12 VDC input, 6 VDC output @ 400 mA. O'all dim.: 5-1/2" L, 2-1/2" W, 2-1/2" H 4210805 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

CHARGER

CABLE

6 ft. FireWire cable, 4 pin to 4 pin, IEEE 1394. Made by Acoustic Research. High quality cable with gold plated ends for better connection. 99 8005343 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

Brand name Motorola cigarette lighter cell phone charger. For use with V60 and equivalent cell phones. Features 1.5 amp output, enough to charge a battery from dead to 90% in about 2 hours. 99 8006916 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

WASHERS

1/2" Flat washers, stainless steel. Pack of 100. 8007197 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

599 BEARINGS

5/8" O.D., pack of 10. Model number R4ZZ. 8006902 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

HOOKS

For roof lights. Makes installing light strands easier Many other uses 8051378 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

99¢

OPENER

Designed to ease opening of CDs and DVDs from their shrink wrap. Cuts plastic wrap without damaging case underneath. Features "Have a nice Day" face and keychain hanger. 8009441 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

3999

design originally for use with plumbing pipes. Has many other uses. Pack of 10. 8007013 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

199

99¢

PULLEY

400

REMOTE

7-way universal learning remote control. Learns the functions of your original remote. LCD screen. Controls TV, DVD, VCR, satellite, cable, CD, and AUX. Works with over 325 brands. Made by Zenith. 8005347 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

CLIPS 96¢ Copper pipe clamps. Nail on

COVER

Self-adhesive to fit over fuel cap door. Adds a race car appearance to your vehicle. Assorted styles. 8003035 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1499

Metal construction. Clothesline style 3-1/2" pulley. 8003147 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

TIRE

199

Titan radial trailer tire, 4 ply, ST 155/80R 13. 8007036 – Wt. 10.0 lbs. . . . . . . . . . . . . . . . . . . . . .

5499

MOUSE PAD

Cloudy sky design. Ultra-thin.. 8006172 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

SPEAKERPHONE /CHARGER

Charges Motorola™ Star-Tac and equivalent cell phones and doubles as handsfree kit. 8002596 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

999 LEVELER

For use on engine hoists. Allows for leveling while lifting or lowering engines. Quality built. 99 8007384 – Wt. 12.9 lbs. . . . . . . . . . . . . . . . . . . . . .

2 PACK TOOL BAGS

Heavy duty design. Made by McGuire™ 8006507 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

3499 CAMERA BAG

Complete with shoulder strap and snap buckle. Large enough to hold a variety of items. O'all dim.: 11-1/2" x 7-1/2" x 4-1/2". 8004265 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

GAUGE

Made by Sunpro, mini triple gauge kit. Features 1-1/2" gauges for oil pressure 0 to 100, ammeter -60 to +60 and coolant temprature 100 to 290. Back lit gauge faces. 99 8006915 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

ADAPTER

Allows VHS-C mini video camera tapes to be played back on standard VCRs. Requires no external power to operate. 8041585 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

BIT SET

Mini 16pc. bit set. 1/8" shank. Great for the hobbiest/crafter. 8005521 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

ADAPTOR

699

Plug-in cell phone battery charger for use with Motorola V60 and equivalent cell phones. 8006916 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

401

LANGUAGE MULTIPAK

Kit comes complete with a full 12 disc series to learn 4 European languages. Teaches French, German, Italian and Spanish. Includes stereo headset with mic to assist in learning and can be used for other applications as well. Fully immersive design teaches easily all four languages. 8009383 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

SOFTWARE

2499

Convenient SOHO computer software helps you better organize your small business, photo projects, business or home labeling projects or just keep your addresses better organized. Works with most operating systems to current date. Easy to install and use. A) MY MAIL AND ADDRESS BOOK – easily manage and utilize personal and business e-mail/ postal mail addresses and contact information 99 8009359 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) MY LABELS – print everything from postal mail to jam jar labels, customize your own designs 99 8009367 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

14 14

CHARGER

Travel style Motorola Star-Tac and equivalent charger. 8007405 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

C) MY INVOICES AND ESTIMATES DELUXE –

699

make custom designed invoices and estimate sheets for any type of business 99 8009375 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . D) DIGITAL PHOTO ALBUM – organize, customize and upload digital photos to friends and relatives via internet or e-mail easily. 99 8009391 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

16 9

GAMING KIT

Designed for use with the X-Box gaming console, includes 8 MB memory card and breakaway controller cord. Made by Interact. 8009409 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

SWITCH 1999 125V 15 amp snap microswitch.

8007230 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

149

EXTENSION

Designed for use with the X-Box gaming console, 7 ft. controller extension cable. Made by Interact. 8009417 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CASE

699

BAG

402

Camouflage pattern mesh bag. Measures 29" x 18". Great for camping, hunting etc. Breathable design. 8007129 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

399

Made by Belkin. Designed for use as a laptop bag. Well padded for ultimate storage safety. Features pockets for everything from disks to file folders. Has shoulder strap and carry handle. Outside dimensions are 13" x 10.5" x 2.5". 8007324 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

2499

SHIFTER KNOB

Assorted sizes and styles of manual transmission shift knobs. See your nearest PAL store for best selection. 8003941 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499 SURGE PROTECTOR

LUBRICANT

Antiseize lubricant made by Permatex. 1 oz. tube. Resists moisture and withstands tempratures up to 1600° farenheit. 99 8003184 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

8 outlet surge protector, 1214 joules for maximum protection. Features extra phone line protection, dust covers for unused outlets and two spaced outlets for adaptors. 8007311 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

SURGE PROTECTOR

7 outlet surge protector, 752 joules. Features extra phone line protection. 8007316 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CABLE

6ft. long digital optical cable. For transferring surround sound from optical compatible components to receivers etc. Toslink style ends. 8007339 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

699 SURGE PROTECTOR

MOUSE

Basic style 2-button PC mouse. Great low cost replacement mouse. 8003553 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

CD-RW

Pack of 10 CD-RW discs with cases. 80 min. capacity. 8006966 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

8 outlet surge protector, 1214 joules for maximum protection. Features 2 extra phone line protectors, dust covers for unused outlets and 2 spaced outlets for adaptors. 8007388 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

ADAPTOR

1499

120 VAC input, 15 VDC output @ 2.4 amp. 8007224 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

999

CABLE

Monster Cable RJ11 high performance telephone/internet cable with snagless boots. 25 ft. long for extra reach. Ensure you’re getting the signal you should be with this super high quality cable. Cable has 2 pairs meeting the Cat-5e standard for twists. 99 8006942 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

CORD

Bulk 18/3 cord with 3-prong connector. 5 ft. long. Heavy duty design. Removed from service but in new condition. Great for power tool replacement cords etc. White. 99 8008369 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

403

The following Team Members have changed their positions within our organization since November 2003. NAME

404

FROM

Mosenko, Carsten Night Receiver Clark, Jason Sales Potenza, Fabio Sales Tataryn, Ben Inventory Auditor (DC) Knispel, Falon Receptionist Leonard, Megan Sales Melvin, Mike Sales Kononen, Kimmo Sales Organ, Glen Operations Leader Bushell, Chris Warehouse Worker (DC) Hurst, Jeff Team Leader Trainee Zammit, Kim Team Leader Trainee Willliams, Fred Sales Halliday, Don Warehouse Worker (DC) Mytopher, Quinton Team Leader Trainee Addison, John Asst. Buyer Serson, Jeff Team Leader Trainee Bahr, Lynn Team Leader Trainee Snook, Julia Sales (Dartmouth) Miller, John Sales Garcia, B.J. Machine Operator (Mfg.) Bautista Romano Warehouse Worker (DC) Lobb, Mike Warehouse Worker (DC) Totin, David Warehouse Worker (DC) Vizor, Barry Warehouse Worker (DC) MacKay, Jim Warehouse Worker (DC) Richards, Jeff Night Receiver Anderson, Tara Operations Leader (Calgary) Pryla, Louise Team Leader Trainee Larson, Ken Sales Team Member (Panet) Kangas, Reverly VP of Team Development Gable, Sandy VP of Administration and Safety Willis, Ginny Asst. Leader of Team Dev. Davies, Stuart Outside PAL McIntyre, Janet Sales Hammond, ShannonCashier Cornelius, Jevon Sales Einarsson, Erik Team Leader Trainee (Ottawa) Lussier, Marcel Team Leader Trainee (Langley) Wagar, Dale Lead Hand Cylinder Assembler Brown, Terry Senior Programmer Watt, Stuart Design Engineer Reimer, Stefan Team Leader Trainee Cassidy, Dan Team Leader Trainee Kononen, Kimmo Night Receiving Leader Neufeld, Lenis Night Receiving Leader Fort, Evan Sales Beatty, Kathy Cashier Popovich, Dave Material Control & Service Leader Cournoyer, Cristen Circulation Coordinator (Adv) Zammit, Kim Asst. Team Leader (London) Bron, Fred Asst. Team Leader Thorson, Diane Asst. Team Leader (Calgary) Harley, Perry Sales Willis, Ginny Leader of Team Development Hiring Facilitator Krowiak, Jana Senior Leader (Mfg.) Evans, Neil Schultz, Jim Night Receiver Jackson, Denise Sales

Night Receiving Leader (Grande Prairie) Night Receiving Leader (Panet) Operational Asst. (Panet) Assembly Team Member (BLB) Import Asst. Team Leader Trainee (London) Team Leader Trainee (London) Night Receiving Leader (Prince George) Team Leader (Mississauga) Bagger/Washer (Mfg) Asst. Leader (London) Asst. Leader (London) Night Receiving TLT (Kelowna) Bagger/Washer (Mfg) Asst. Leader (Saskatoon) Buyer (Merchandising) Asst. Team Leader (Regina) Asst. Team Leader (Calgary) Team Leader Trainee (Calgary) Team Leader Trainee (Kitchener) Structural Assembler (Mfg.) Structural Assembler (Mfg.) Bagger/Washer (Mfg.) Bagger/Washer (Mfg.) Cylinder Assembler (Mfg.) Cylinder Assembler (Mfg.) Night Receiving Leader (Saskatoon) Team Leader (Brandon) Asst. Team Leader (Mississauga) Night Receiving Leader (Portage Ave) Senior VP Corporate Communications VP of Team Development Leader of Team Development Health and Safety Leader Team Leader Trainee (Mississauga) Team Leader Trainee (Mississauga) Team Leader Trainee (Mississauga) Asst. Team Leader (Portage Winnipeg) Asst. Team Leader (Calgary) Robotic Assembler (Mfg.) Asst. Team Leader (IS) Value Stream Leader (Mfg) Asst. Team Leader (Hamilton) Night Receiving Leader (Prince George) Team Leader Trainee (Prince George) Team Leader Trainee (Red Deer) Team Leader Trainee (Whitby) Retail Admin. Coordinator (Langley) Additional: Asst. Leader Production (Mfg.) Additional: Privacy Officer Asst. Team Leader (Edmonton) Night Receiving Asst. Team Leader (Whitby) Asst. Team Leader (Red Deer) Night Receiving Leader (Hamilton) Leader of Training (Team Development) Asst. Team Leader Senior Leader (Team Development) Night Receiving Leader (Regina) Team Leader Trainee (Kitchener)

MONTH

Nov. Dec. Dec. Dec. Dec. Dec. Dec. Dec. Dec. Jan. Jan. Jan. Jan. Jan. Jan. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Feb. Mar. Mar. Mar. Mar. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. Apr. May May May May May May May

The following Team Members have changed their positions within our organization since November 2003. NAME

FROM

Bourque, Marc Salisbury, Dave Cruz, Mark Guluzian, Mark Benjamin, Maldon Giddens, Dawn Douglas, Chris Heckhaus, Connie Palachik, Jonathan Cole, Sheila Kirton, Kim Calliou, Sheila Weibe, Todd Leach, Michael Bellefeuille, Norm Anderson, Tara Nikkel, Janice Downie, Christine Juric, Zdenko Fort, Evan Bowen, Tammy Coyle, Karen Fisher, Al Knight, Colin

Night Receiving Trainee Night Receiver Sales Sales Sales Team Leader (Whitby) Asst. Team Leader Team Leader Trainee (Barrie) Team Leader Trainee Data Entry Clerk Data Entry Clerk Cashier Night Receiver VP of Sales & Marketing (BLB) Sales Team Leader (Brandon) Team Development Coordinator Sales Team Member Team Leader Trainee Team Leader Trainee Sales Team Member Hydraulic Specialist II Night Receiver Afternoon Shift Leader

Team Leader Trainee (Moncton) Night Receiving TLT (Moncton) Team Leader Trainee (Mississauga) Team Leader Trainee (Mississauga) Team Leader Trainee (Mississauga) Asst. Team Leader (Moncton) Team Leader (Whitby) Retail Admin. Coordinator (Mississauga) Asst. Team Leader (Whitby) Administrative Asst. (DC) Administrative Asst. (DC) Retail Inventory Auditor (Calgary) Night Receiving TLT (Calgary) Senior VP of Retail Operations (Retail) Inventory Audit Clerk (Ottawa) Retail Operations Leader (Edmonton) Accounts Receivable Clerk Inventory Auditor (Langley) Inventory Auditor (Dartmouth) Night Receiving Leader (Whitby) Team Leader Trainee (Whitby) Team Leader Trainee (Whitby) Team Leader Trainee (Whitby) Team Leader (Mfg)

MONTH

May May May May May May May May May May May Jun. Jun. Jun. Jun. Jun. Jun. Jun. Jun. Jun. Jun. Jun. Jun. Jun.

NEED A CATALOGUE? To receive our 400+ page catalogue and our monthly promotions, please do one of the following: 1) Place an order through our National Call Centre at 1-800-665-8685; or 2) Fill out a catalogue request form the next time you are shopping at any one of our 20 retail stores across Canada; or 3) Fill in the “Add” box (below) and send it to: PRINCESS AUTO LTD., PO Box 1005, Winnipeg, MB, R3C 2W7or FAX us at (204) 663-7663. Please include all information. Please update your name every nine (9) months to remain on our mailing list. ALL MAILING LIST INFORMATION IS KEPT STRICTLY CONFIDENTIAL. We do NOT sell, rent or lend any pesonal information you provide.

Find out more at www.princessauto.com/privacy or call 1-800-665-8685

Company Name (if applicable)

(

)

Telephone Number

C249

PLEASE PRINT CLEARLY Surname

First Initial

E-mail address

YES, I want to receive email notifications

Street Address

R.R. Number, Box Number, etc.

City/Town and Province

Postal Code

I use Princess Auto products mostly for: Farm Business Home I prefer to receive promotional materials in French or English? (SORRY, OUR LARGE CATALOGUE IS ONLY AVAILABLE IN ENGLISH.)

405

ORDER FORM WINNIPEG MAIL ORDER: Phone Toll Free: 1-800-665-8685 DATE: Fax Toll Free: 1-800-265-4212 Mailing Address: P.O. BOX 1005, WINNIPEG, MB. R3C 2W7 Shop Online: www.princessauto.com

PLEASE PRINT CLEARLY

Company Name (if applicable)

(

)

Surname

First Initial

Telephone Number

Email address:

Street Address

R.R. Number, Box Number, etc.

City/Town and Province

YES, I want to receive email notifications

Postal Code

I use Princess Auto products mostly for

Farm

Business

Home

I do not wish to receive addressed promotional materials from Princess Auto. I prefer to receive promotional materials in French or English? PRICES ARE SUBJECT TO CHANGE

Qty.

ITEM #

Page #

DESCRIPTION

WEIGHT

PRICE (ea.)

SUB-TOTAL SHIPPING RATES $4.00 base rate plus 40Â¢ per pound See page 407 for full details

ADD SHIPPING and PROCESSING FEES

SUB-TOTAL ADD PROVINCIAL SALES TAX (If applicable)

BC 7.5% , MB 7%, SK 6%, ON 8%, ADD 7% G.S.T. to all charges except P.S.T. in PE, PQ, ON, MB, SK, AB, BC, YT, & NT. ADD 15% H.S.T. in NF, NS, NB

We no longer accept C.O.D. as a method of payment.

GRAND TOTAL

METHOD OF PAYMENT:

406

Card Expiration Date

MAIL ORDER CUSTOMERS... Can't make it in? Contact our National Call Centre today and let us take care of the rest. DELIVERY SERVICE 2 to 5 Business Days SHIPPING RATES $4.00 base rate plus 40Â˘ per pound

Phone: 1-800-665-8685 Fax: 1-800-265-4212 e-mail: mailorder@princessauto.com Or to contact a Princess Auto store closest to you, see page 409 for locations. * Princess Auto reserves the right to choose the shipping carrier. * Orders shipped by carriers outside of our program, are subject to a minimum $5.00 processing fee and will be sent freight collect. * Air stage customers please call for a special quote.

Methods of Payment When ordering by phone, mail or fax we accept: CREDIT CARDS: Visa and Mastercard CHARGE ACCOUNTS: To open a Princess Auto 30-Day Business or Institutional Charge Account, contact our Credit Department in Winnipeg at (204) 667-4630 or the Princess Auto Store nearest store you

We no longer accept C.O.D. as a method of payment.

Pricing: It is Princess Autoâ&#x20AC;&#x2122;s objective to maintain prices for the life of the catalogue to the best of our ability. However, due to changing market conditions beyond our control, prices are subject to change without notice. Catalogue prices do not include P.S.T., G.S.T. or H.S.T.

Phone Winnipeg Toll Free:

1-800-665-8685

Toll Free Fax: 1-800-265-4212

23 stores across Canada

www.princessauto.com

See pg. 409 for locations

407

PRINCESS AUTO RESPECTS YOUR PRIVACY We believe that all Princess Auto Ltd. customers should be treated fairly, honestly, ethically and with dignity and respect. We value our relationship with our customers, and as such, Princess Auto Ltd. is committed to maintaining the accuracy, confidentiality, security and privacy of your information. Our privacy policy describes the personal information we collect about you, why we collect it and how we use it at our retail locations, our National Call Centre, Head Office and at www.princessauto.com. Princess Auto Ltd. DOES NOT sell any of your information to third parties. Check our website www.princessauto.com/privacy for the complete Privacy and Security Policy. What information does Princess Auto collect about you? When you call our National Call Centre, we collect your name, address, phone number and credit card information to place an order. We will also ask you at this time if you wish to receive our promotional materials. In our stores, when signing up on our mailing list, we collect your name, address phone number, email address and language preference in order to send you our promotional materials. For returns and exchanges, we may require your identification including your name, address, and/or telephone number. For auditing purposes, you may be called to verify the return and our service levels. For prepaid merchandise, we will require identification of the person picking up the order. When paying by cheque, we require two pieces of valid identification. We collect information via our website - such as your name, email address, mailing address, phone number, language preference and credit card information (if applicable) - that you provide to us when signing up for our e-flyer, requesting to be mailed a flyer and/or catalogue and when placing an order. We may also collect certain statistical information via our website, in-store or through our National Call Centre during contests or when you sign up for our promotional materials in order for us to learn more about our customers and improve our service to you. All of the statistical information collected is used strictly for internal analysis purposes. How does Princess Auto use my information? When you make a purchase online at www.princessauto.com or through our National Call Centre, we use your information to process your order. We may also need to use your phone or fax number, email or mailing address to contact you if we have any questions about your order.

408

When visiting www.princessauto.com, you can voluntarily submit your email address to receive electronic notices of upcoming promotions and specials. If at any time you decide you would rather not receive these messages, please

send an email to: webmail@princessauto.com Subject: Remove, or follow the unsubscribe link at the bottom of the email. When visiting any of our 23 retail locations across Canada, you can voluntarily provide us your mailing information in order to receive our promotional materials. Does Princess Auto share my information with third parties? Princess Auto does not sell or share any of your personal information with anyone. However, we do contract to third parties in order to fulfill your order and send you our promotional materials. We only share with these third parties the information required to fulfill these duties, and do not authorize them to use your information in any other way. We have confidentiality agreements with these parties to ensure the protection of your personal information. What if I no longer wish to receive your promotional materials? We only want to send you our promotional materials if you want to receive them. If you prefer not to receive information from us about our products, services, contests, or promotions via email, postal mail or phone, please let us know by email at mailer@princessauto.com, by phone at 1-800-665-8685, by fax at 1-800-2654212 or by postal mail to P.O. Box 1005, Winnipeg, MB R3C 2W7. What if I have questions about this policy? If you have any questions regarding this policy or the way we collect, use or disclose your personal information, please contact our privacy officer via email at cristen.cournoyer@princessauto.com, or by sending a letter, Attn: Privacy Officer to Princess Auto, P.O. Box 1005, Winnipeg, MB R3C 2W7 or by contacting our National Call Centre at 1-800-665-8685. Our privacy policy may be updated at any time. Please check www.princessauto.com/privacy regularly for any changes.

S T O R E N

DARTMOUTH (Burnside Park) 81 Wright Ave. B3B 1H4 Ph: (902) 468-8396 Fax: (902) 468-7842 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p. m. Sunday, Closed N E W B R U N S U N S W I C K

MONCTON 1380 Mountain Rd., E1C 2T8 Ph: (506) 388-4400 Fax (506) 388-4404 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 1:00 p.m. - 5:00 p.m. O N O

OTTAWA 1301 Ages Dr. (at Hawthorne Rd.), K1G 6N1 Ph: (613) 247-1651 Fax: (613) 247-1657 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. MISSISSAUGA 6608 Dixie Road L5T 2Z9 Ph: (905) 564-1011 Fax: (905) 564-8023 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 11:00 a.m. - 5:00 p.m. KITCHENER 2 Executive Place, N2P 2N4 Ph: (519) 743-0742 Fax: (519) 743-0033 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 10:00 a.m. - 5:00 p.m. HAMILTON 244 Lake Ave. N. (at Barton), L8E 3A2 Ph: (905) 561-9400 Fax: (905) 561-7233 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. LONDON 583 Exeter Rd., N6E 2Z2 Ph: (519) 649-7001 Fax: (519) 649-7351 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. BARRIE 11 Commerce Park Dr., L4N 8X1 Ph: (705) 739-0575 Fax: (705) 739-7362 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

WHITBY 1550 Victoria St. E., L1N 9W7 Ph: (905) 665-8581 Fax: (905) 665-5949 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 11:00 a.m. - 5:00 p.m. M

W I C K

L O C A T I O N S

CALGARY 2850 Hopewell Place N.E., T1Y 7J7 Ph: (403) 250-1133 Fax: (403) 291-2781 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 11:00 a.m. - 5:00 p.m. A

WINNIPEG (Mail Order) Mailing Address Box 1005, Wpg., MB., R3C 2W7 Ph: 1-800-665-8685 Fax: 1-800-265-4212 Mon. to Fri., 7:00 a.m. - 6:30 p.m. Saturday, 8:00 a.m. - 4:00 p.m.

LETHBRIDGE 2950-32nd St. S., T1K 7B4 Ph: (403) 327-7300 Fax: (403) 327-1871 Mon., Tues., 8:00 a.m. - 6:00 p.m. Wed. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 12:00 p.m. - 5:00 p.m.

WINNIPEG (Panet Road) 465 Panet Rd., R2C 2Z1 Ph: (204) 669-4252 Fax: (204) 669-4269 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 12:00 p.m. - 5:00 p.m.

RED DEER 6833-66th Street T4P 3T5 Ph: (403) 342-6181 Fax: (403) 346-6855 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 11:00 a.m. - 5:00 p.m.

WINNIPEG (Portage Ave.) 3421 Portage Ave. W (At Cavalier). R3K 2C9 Ph: (204) 831-8275 Fax: (204) 831-0238 Mon. to Fri., 9:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 12:00 p.m. - 5:00 p.m.

GRANDE PRAIRIE 13601-100th St., T8V 4H4 Ph: (780) 539-1550 Fax: (780) 532-2757 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

BRANDON 1800-18th Street N., R7C 1A5 Ph: (204) 726-0601 Fax: (204) 729-9256 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 12:00 p.m. - 5:00 p.m. S A S K A T C H E W A N

REGINA 2770 Victoria Ave. E., S4N 6M5 Ph: (306) 721-5115 Fax: (306) 721-2696 Mon. to Fri., 8:00 a.m. - 8:00 p.m Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 10:00 a.m. - 5:00 p.m.

C O L U M B I A

KELOWNA 1920 Spall Road, V1Y 4R1 Ph: (250) 860-6191 Fax: (250) 861-8372 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. LANGLEY 19878 Langley Bypass (in Langley Square), V3A 4Y1 Ph: (604) 534-9554 Fax: (604) 534-1163 Mon. to Fri. 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 10:00 a.m. - 5:00 p.m.

SASKATOON 610 Cynthia St., S7L 6A2 Ph: (306) 665-8022 Fax: (306) 664-9554 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 10:00 a.m. - 5:00 p.m.

EDMONTON 11260-163rd. St. NW, T5M 3R5 Ph: (780) 483-0244 Fax: (780) 484-7080 Mon. to Fri., 8:00 a.m. - 8:00 p.m. Saturday, 8:00 a.m. - 5:00 p.m. Sunday, 11:00 a.m. - 5:00 p.m.

B R I T I S H

PRINCE GEORGE 3330 Massey Drive, Massey Centre, V2N 4C1 Ph: (250) 563-3113 Fax: (250) 563-3232 Mon. to Fri. 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. COQUITLAM 15 King Edward St., V3K 4S8 Ph: (604) 777-0735 Fax: (604) 777-0884 Mon. to Fri. 8:00 a.m. - 8:00 p.m. Saturday, 9:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

409

I N D E X

410

A Acrylic Pieces 393 Adapters 328 Cigarette 328, 396, 400 Power 354-355, 400-403 VHS 401 Adjustable Wrenches 245, 392 Air Chucks 124-125 Air Compressors 111-115 Accessories 117-118, 125-126 Oil 116 Pumps 116 Repair Kits 347 Starters 117 Switches 118 Tanks 125 Air Cylinders 10-11, 347 Air Dryer 125 Air Filters 126 Air Fittings 110, 119-121, 347 Air Gauges 118, 126 Air Hose 110, 121-122 Air Hose Reels 123 Air Lubricators 126, 347 Air Manifolds 121 Air Regulators 126, 347 Air Tools Angle Grinders 139 Belt Sanders 134 Blow Guns 123-124, 135 Body Saw 139 Buffing Tools 152-153 Caulking Guns 138 Cut Off Saws 138 Die Grinders 140-141 Drills 137, 140 Engine Cleaning Guns 135 Grease Guns 110 Hammers 137 Hammer Drills 137 Impact Wrenches 136 Oil 138 Paint Guns & Accessories 127-129 Polishing Tools 152-153 Punch/Flange Tool 138 Ratchets 135 Riveters 138 Sandblasters 110, 130-132 Sanders 134 Shears & Nibblers 139 Texture Gun 138 Underbody Guns 135 Air Valves 117-120, 347 Aircraft Cable 57 Alligator Clips 317, 367 Anchor Kits 87, 367, 374 Anchors 338 Angle Grinders 139, 144 Antenna Wire 367 Antennas 368 Anvils & Vises 181-182 Apron 273 Art Knife 269 ATV Acessories 342 ATV Winches 334 Audio Accessories 361-367, 397, 404 Autobody Tools 204-269 Automotive Accessories 385-387 Automotive Chemicals 184-185

Automotive Gauges 327, 398-399, 401, 403 Automotive Handles 385 Automotive Switches 382 Automotive Tools 191-192, 209218 Awls 47, 271 Axes 253 Axles 295 Assemblies 295-298 Components 297-299

B Back-Up Alarm 326 Bags 272, 389, 391, 401-402 Bale Hooks 46 Ball Mounts 292, 311, 387 Ball Pein Hammers 251 Ball Sockets 83 Bandsaws 171-172 Blades 172-173 Cutting Oil 172 Bar Clamps 231-232 Batteries 143, 356, 360 Battery Chargers 167 Battery Cable Clamps 167, 382 Battery Switches 328 Battery Terminals 328 Battery Testers 192, 214 Battery Tools 192, 214-215 Battery Washers 328 Beam Clamps 165 Bearing Tools 192, 219 Bearing Pullers 219 Bearings Assemblies 100-101 Ball 101, 400 Flange 304 Roller 298 Turntable 100 Belt Dressing 99 Belts 99, 374 Bench Grinders 177 Accessories. See 177-178 Bilge Pump 66 Bit Holder 228 Bits Drill 146-150, 179, 395 Screwdriver 193, 227-228 Blank CDs 403 Block Heater Timer 78 Blueprints 314 Boat Bumpers 301 Bolt and Screw Gauges 393 Bolt Cutters 195, 247-248 Bolt Extractors 276 Bolt Type Pullers 220 Books & Manuals 94, 208-209, 285 Booster Cables 167, 382 Bottle Jacks 160-161 Bow Saws 256 Box Cutters 196, 196 Box Track 52 Brackets 376 Brake Assemblies 95 Brake Controllers 301, 310 Brake Tools 191, 218 Brakes 95, 297 Brass Hammers 251 Brazing Rods 291 Breaker Bars 239

Breathers 5, 11, 39 Bridge Rectifier 351 Brooms & Accessories 195, 254, 377 Brushes File 258 Nylon 151 Paint 269, 391 Parts Washer 170 Pressure Washer 105 Welding 286 Wire 151, 153, 156, 286, 395 Buckets 45-46 Bulbs 44, 81, 321 Buffing and Polishing Tools 141, 142-143, 145, 152-153 Bumpers 301 Bungee Cords 55-56, 389 Bushings 82, 95, 100-101, 348 Butane 288

C â&#x20AC;&#x153;Câ&#x20AC;? Clamps 231 Cable Aircraft 57 Audio 365-366 Battery 380 Booster 167 Co-Ax 366 Computer 371, 400, 403 Telephone 359 Welding 284 Winch 332 Cable Cutters 195 Cable Standoffs 367 Cable Tie Gun 319 Cable Ties 294, 319, 374 Calipers 262-263, 394 Carabiner 56 Cargo Bar 339 Cargo Rope 292 Carts Hand 168 Pressure Washer 104 Push 169 Service 274 Welding 283 Casters 343-345, 379 Cattle Prod 48 Caulking Guns 138, 205 Caution Tape 378 CD Mount 360 CDs 403 Cell Phone Accessories 355-358, 396, 400-403 Centre Finder 263 Centre Punches 250-251 Centrifugal Clutches 94 Chain Coil 89 Roller 96 Safety 312 Tow 294, 337 Chain Hoists 164-165 Chainsaws 399 Chalk Line 259 Chargers 167, 354-355, 357, 370, 396, 401-402 Chemicals 170, 184-185 Chipping Hammers 286 Chisels 137, 195, 249-251, 270 Chocks 307

I N D E X

411

Chop Saws 144, 171 Chop Saw Wheels 171 Chucks 124-125, 146, 228, 392, 395 Cigarette Plug Adapters 328, 396, 400 Clamps “C” 231 Bar 231-232 Beam Clamps 165 Battery Cable 167, 382 Drill Press 179 Exhaust Pipe 53 Hemostats 268, 393 Hose 39, 68, 210-211 Lifting Clamps 165 Locking 232, 234 Muffler 53 Nylon 317 Pipe 232 Sheet Metal 285 Spring 231 Welding 285 Claw Hammers 252 Cleaning Chemicals 108 Clevis Pins 84 Clips 85, 317, 367, 376 Clothing 203 Club Hammers 251 Clutches 94 Coil Chain 89 Combination Wrenches 242-245 Comealongs 90 Computer Accessories 368-372, 402-403 Connector Sets 283 Connectors & Terminals 316-317, 380 Contour Gauge 263 Controllers 348, 352 Conversion Table 264 Cord Audio 365-366 Bungee 55-56, 389 Electrical 77-79 Extension 77-79 Cord Connector 79 Cotter pins 85 Counter Sinks 149 Counters 77 Couplers Flexible 97 Hydraulic 35, 206 Pressure Washer 106, 109 Quick 67, 106 Water 67-69 Trailer 309-311 Crane 330 Crimpers 50, 137, 292, 318, 372 Cross Pien Hammers 251 Cut Off Saws 138, 171 Cut Off Wheels 154-155, 171 Cutting Oil 172, 179 Cutting Tools Air Shears 139 Art Knife 269 Bolt Cutters 195, 247-248 Box Cutters 196, 269-270 Die Grinders 140-142 Glass Cutter 271 Hose Cutters 195 Pipe Cutters 195, 246 Pliers 234-235

Saws 110, 138-139, 143-144, 149, 153, 156, 159, 171-173, 256, 393 Scissors 269 Snips 195, 249 Cutting Wheels 142, 154-155 Cylinder Pins 5, 24 Cylinders Air 347 Cylinders 2-6, 9-10

D De-Icers 46 Dead Blow Hammers 252 Deburring Tools 245, 394 Dental Tools 270 Depth Gauge 263 Diamond Points 150 Diamond Saws 144 Die Grinder Accessories 141-142 Die Grinders 140-141 Dies 275 Dimmer Switch 351 Disconnect Tools 210 Dividers 263 Dollies Barrel 169 Platform 169 Trailer 313 Vehicle 168 Wheel 168, 345 Door Chime 353 Door Hardware 51 Draw Bar 82 Drawer Liner 274 Drill Accessories 146-150, 179, 227-230, 392, 395, 395 Drill Bit Sharpener 146 Drill Bits 146-150, 179, 227-230, 395 Drill Chucks 146, 228, 392, 401 Drill Keys 146 Drill Presses 179 Accessories 180 Clamp 179 Drill Bits 179 High Speed Cutting Oil 179 Roller Stands 180 Drill Pumps 66 Drill Shaft 146 Drills 137, 140, 143, 179, 269 Driveline Hardware 94-101 Bearing Assemblies 100-101 Bushings 95, 100 Clutches 94 Couplings 97 Hubs 97-98 Keystock 99 Keyed Shafting 97 Pulleys 97-99 Roller Chain 96 Sheaves 100 Sprockets 95, 98 V-Belts 99 Drum & Barrel Faucet 67

E E-Clips 85 Electric Motors 75-76, 349-350, 397 Electric Winches 333-335 Electrical Cord 77-79, 353 Electrical Outlets 77

Electrical Plugs 78-79, 284 Electrical Switches 79 Electrical Tape 79, 380 Emery Cloth 207, 392 End Caps 9 Energizers 48-49 Engine Cleaning Guns 135 Engine Stands 165 Engines 92 Engraver 271 Exhaust Caps 53 Exhaust Pipe Clamps 53 Exhaust Tools 218 Extension Bars 158, 239, 392 Extension Cords 77-79 Extruded Aluminum 278 Angle 278 Channel 278 Flat Bar 278 Round Rod 278 Round Tubing 278 Square Tubing 278 Threaded Rod 278 Eye Bolts 86 Eye Hooks 89 Eyelets 55

F Fan Switches 73, 327 Fans 72-74, 350, 372 Farm Jacks 163 Farrier Tools 47-48 Faucet, Drum & Barrel 67 Feed Equipment 44-46 Feeler Gauges 192 Fence Energizers 48-49 Fence Insulators 51 Fence Posts 50 Fence Wire 49-50 Fencing 48-51 Fencing Tools 50-51 Fenders 300 File Brush 258 File Handles 258 Files Bastard 257 Chain Saw 258 Diamond 257 Farrier 47 Machinist 257 Needle 258 Riffler 257 Filters 94, 109 Air 126 Fuel 61 Hydraulic 38-40 Oil 373 Pressure Washer 109 Water 63 Fire Hose Nozzle 63 Firewire Cable 371, 400 First Aid Kits 199 Fish Tape 259 Fittings Air 110, 119-121, 347 Grease 222, 395 Hydraulics 29-34, 37 Pipe 70-71 Propane 291 Water 62-63, 67-71, 348 Flagging Tape 203 Flange Bearings 304 Flaring Tool Kits 246

Flashlights 42, 267-268 Flat Bars 83 Flexible Couplings 97 Float Switches 65 Flood Lights 80 Floor Jacks 162 Fluid/Solvent Pump 62 Flywheel Pullers 221 Fog Lights 292, 321 Framing Hammers 393 Front End Service Sets 192, 221 Fuel 189, 290 Fuel Caps 61 Fuel Gauges 328 Fuel Nozzles 60 Fuel Filters 61 Fuel Hose 60-61 Fuel Pumps 59-62 Funnels 223 Fuses 190, 320, 381

Cable Tie 319 Caulking 138, 205 Engine Cleaning 135 Glue 393 Grease 110, 222-223 Heat 145 Pressure Washer 105 Sandblasting 132 Suction 223 Texture 138 Underbody 135 Guywire 367

Hacksaws 256 Hair Pins 83-84 Halters 47 Hammer Drill 143 Hammer Handles 253 Hammers 251-253, 393 Air 137 G Ball Pein 251, 393 Game Pad 370 Brass 251 Garden Hose Couplers 68-69 Chipping 286 Gate Hardware 51-52, 313 Claw 252 Gas Engines 92 Club 251 Accessories 93 Cross Pein 251 Repair Books 94 Dead Blow 252 Gas Shocks 347 Framing 393 Gasket Makers & Sealants 182Hobby 252 Mallets 252 185 Sledge 253 Gasket Punches 250 Welding 286 Gauges Air Compressor 118, 126 Hand Carts 168 Automotive 327, 399, 401 Hand Winches 293, 331-332 Bolt and Screw 393 Handles Contour 263 Automotive 385 Depth 263 Broom 254, 377 Fuel 328 File 258 Hour 328 Hammer 253 Hydraulic 38 Sledge 253 Line Marking 259 Squeegee 254 Pipe 393 Handsfree Kits 355-356, 396 Sheet Metal 263 Hard Hats 133, 200 Tire 305 Hardware 376 Harmonic Pullers 219, 221 Water 69, 107, 109 Hay Nets 46 Welding 278, 284 Headphones 366 Gear Pullers 221 Hearing Protection 199 Generators 74 Heat Gun 145 Glass Cutter 271 Heat Lamps 44 Glasses 197-198, 395 Gloves 133, 191, 200-202, 287, 391 Heat Shrink Tubing 318-319 Glue Gun 393 Heat Switches 351 Goggles 197, 260, 288 Heater Hose 331 Heaters Grab Bars 313 Air Compressor 117 Grab Hooks 88, 377 Grease 192, 223 Auxillary 331 Bucket 46 Grease Extractor 166 Space 188-190 Grease Fittings 222, 395 Grease Guns 110, 138, 222-223 Helmets 133, 200, 287-288 Hemostats 268, 393 Grease Hose 223 Hex Key Sets 229, 230, 231 Grease Tools 110, 222-223, 299 Hinges 375 Grinders Hitch Pins 82 Angle 139, 144 Hitches 292-294, 309-312, 387 Bench 177 Hobby Hammers 252 Die140-141 Grinding & Wire Wheels 155, 178, Hobby Tools 252, 267-271 Grinding Points 141 Hoists Grinding Stones 141-142 Chain 164-165 Grit 133 Ratchet 90, 377 Grooming Tools 48 Rope 164 Guns Hole Saws 110, 159 Blow 123-124, 135 Hollow Punches 249-250

Hoods 133 Hooks Bale 46 Eye 89 Grab 88, 377 Pintle 310 Quick 89 Rubber 340 Slip 88 Snap 58, 390 Strap 377 Suction 39 Swivel 89, 390 Tow 88 Horns 326 Horse Care Farrier Tools 47-48 Grooming Tools 48 Halters 47 Hay Nets 46 Lead Ropes 46 Saddle Soap 47 Waterers 45 Hose Air 110, 121-122 Fuel 60-61 Garden 69 Grease 223 Heater 331 Hydraulic 29, 31, 39-40, 205 Oil 328 Pressure Washer 105 Propane 291 Water 65, 69, 71 Welding 283 Hose Adapter 348 Hose Clamp Screwdriver 241 Hose Clamps 39, 68, 210-211 Hose Connectors 68 Hose Reels Air 123 Pressure Washer 102 Welding 283 Hour Meter 328 House Numbers 374 Hubs 97-98, 291 Hydraulic Winches 335 Hydraulics Couplers 35, 206 Cylinders 2-6, 9 Filters 37-39 Fittings 29-34, 37 Gauges 38 Hose 29, 31, 39-40, 205 Hose Clamps 39 Hydraulic Rams 204-205 Lift Kits 204-206 Motors 14, 16-18 Oil 31 Power Packs 12-15 Gear Puller 221 Pumps 11, 15-17, 205 Resevoirs 36 Seal Kits 5 Strainers 39 Switches 40 Valves 11, 20-28, 40, 347

I N D E X

I Electronic Immmobilizer 384 Impact Drivers 193, 227 Impact Sockets 157-158 Impact Wrenches 136, 145

412

I N D E X

Implement Jacks 293, 308-309 Inner Tubes 294, 303, 304 Insulator Tubing 50 Insulators 51

J Jack Stands 163 Jacks Bottle Jacks 160-161 Farm Jacks 163 Floor 162 Implement 293, 308-309 Oil 160 Pallet 169 Race 161 Ratchet 82 Saddle 162 Scissor Jack 160 Speed Lift Jack 161 Trailer 293-294, 307-308 Transimission Adapter 162 Transimission Jacks 162 Jet Pumps 63 Joysticks Hydraulic 21-25 Videogame 369-370 Junction Boxes 80

K Kerosene 189 Keyboard 369 Keyed Shafting 97 Keystock 99 Knee Pads 199 Knives 196, 269, 270 Knobs 375, 378

413

Lariat 46 Laser Levels 260 Latches 313 Lawn Mower Parts 94 Lead Ropes 46 Leather Care 47 Leather Punch 196, 268 Letter Punches 271 Leveler Feet 41 Levels 196, 260-261 Laser 260 Line 260 Plumb Bob 260 Trailer 313 With Squares 261 Lift Arm Pins 82 Lift Kits 204-206 Lift Slings 164 Lifting Clamps 165 Lights Automotive 292, 321, 322, 382-384, 398-399 Bulbs 44, 81, 321 Flashlights 42, 267-268 Flood 80 Fog 292, 321 Heat 44 Night 384 Roller Skate/Rollerblade 398 Spotlights 81, 321-322 Towing 325 Trailer 292, 323-325, 398 Trouble 81 Linch Pins 83 Line Levels 260

Line Marking Gauge 259 Livestock Care 44-48 Buckets and Pails 45-46 Cattle Prod 48 Farrier Tools 47-48 Feeders 44-45 Grooming Tools 48 Halters 47 Hay Net 46 Heat Lamps 45 Lead Ropes 46 Waterers 44-45 Whip 48 Loadbinders 90 Loading Ramps 294, 329-330 Lock Pins 83 Lock Nuts 86 Locking Clamps 232, 234 Locking Pliers 194, 232, 233, 285 Locks 91, 310, 375 Log Splitters 43 Loom 320, 380 Lubricators 126, 347 Lug Nut Wrenches 305

M Magic Wrap Tape 79 Magnets Clips 394 Flashlight 267-268 Floor 266 Ground Clamps 285 Handle Magnets 264 Mirror 266 Pick Up Tools 265, 268, 271 Rare Earth 196 Rings 265 Screwdriver Magnetizer 264 Socket Holders 273 Strips 265 Tool Holders 273 Welding 285 Wrench Holders 273 Magnifiers 266-267 Mallets 252 Manifolds 121 Manuals 94, 208-209, 285 Masks 198 Mason & Brick Chisels 251 Mats 387 Measuring Tools 391, 394 Calipers 262-263, 394 Centre Finder 263 Contour Gauge 263 Chalk Lines 259 Depth Gauge 263 Dividers 263 Fish Tape 259 Line Marking Gauge 259 Measuring Wheel 259 Micrometers 262 Precision Tools 264 Protractors 263-264 Rulers 196, 264, 391 Sheet Metal Gauges 263 Squangle 262 Squares 261-262 T-Bevels 261 Tape Measures 258-259 Metal Stamp Sets 271 Mice 369 Micro Switches 351-352 Micrometers 262

Microphones 367 Mini Saws 153 Mirrors 266, 302, 385 Motor Oil 92, 96, 185-186 Motors Electric 75-76, 349-350, 397 Hydraulic 14, 16, 18 Timing 350 Toy 348 Vibrating 348 Mounting Boxes 80 Mounting Kits 300 Mounts 292, 311, 360, 387 Mud Flaps 300 Muffler Clamps 53 Mufflers 54, 93 Multimeters 213-214

N Nail Pullers 252-253 Nails 376 Network Accessories 359 Nibblers 139 Night Lights 384 Nozzles Fire Hose 63 Fuel 60 Pressure Washer 106-107 Sandblaster 130-132 Number Punches 271 Nut Drivers 194, 239, 241 Nut Splitters 276 Nuts and Bolts 299 Nylon Brushes 151 Nylon Clamps 317 Nylon Rope 57

O O-Rings 23, 85 Oil Air Compressor 116 Air Tool 138 Hydraulic 31 Cutting 172, 179 Hose 328 Jack 160 Motor 92, 96, 185-186 Pressure Washer 105 Oil and Grease Tools 192-193, 222-223, 394 Oil Containers/Extractors 166 Oil Filter 373 Oil Filter Wrenches 211, 395 Oil Pumps 59 Oilers 138, 222 Oils & Lubricants 185-186 Outlets 77

P Padlocks 91, 310, 375, 388 Paint Brushes 269, 391 Paint Guns 127-129 Paint Tank 129 Pallet Jack 169 Pallet Puller 169 Parts Trays 274 Parts Washer Assessories Brushes 170 Pumps 170 Washing Fluid 170 Parts Washers 170 Patch Kits 307 Pest Control 47

Phone Antennas 368 Phone Cord 359 Phone Jacks 359 Pick 270 Pick Up Tools 264, 265, 266, 268 Floor Magnets 266 Magnets 264-266 Pins Clevis 84 Cotter 85 Cylinder 5, 24 Hair 83-84 Hitch 82 Lift Arm 82 Linch 83 Lock 83 Presto 83 PTO 83 Roll 85 Stablizer 83 Taper 84 Top Link 82 Yoke 84 Pintle Hooks 310 Pipe Cutters 246 Fittings 70-71 Threaders 247 Wrenches 195, 247 Pipe Clamps 232 Pipe & Metal Benders Hydraulic 175 Metal Brakes 176 Rod 176 Universal 176 Pipe Gauges 393 Piston Tools 209 Pliers 194, 234-236 Locking 194, 211, 232, 233, 285 Snap Ring 236 Welding 234, 285 Plumb Bob 260 Plugs 23, 37, 78-79, 284 Pocket Torches 289 Polishing and Buffing Tools 141143, 145, 152-153 Polypropylene Rope 58, 337 Posts 50 Power Adapters 354-355, 400-403 Power Door Lock 384 Power Packs 12-15 Power Steering Puller 220 Power Tools Angle Grinders 144 Chop Saws 144 Diamond Saws 144 Drills 143 Heat Gun 145 Impact Wrench 145 Polisher 145 Reciprocating Saws 143 Rotary Tool 143 Sander 145 Shears 143 Powerbars 42, 77, 403 Precision Measuring Tools 264 Pressure Switches 63, 347 Pressure Washer Accessories Brushes 105 Couplers 106, 109 Filters 109 Guns 105

Hose 105 Hose Reels 105 Nozzles 106, 107 Pump Oil 105 Pumps 104 Wands 106, 109, 347 Pressure Washers 102-103 Presto Pins 83 Propane Hose and Fittings 291 Propane Torches 290 Protractors 263-264 Pry Bars 195-196, 255-256 PTO Adapters 84 PTO Pins 83 PTO Pumps 17 Pull Switches 351 Pullers Bearing 192, 219 Bolt Type 220 Flywheel 221 Front End Service Set 192 Gear 221 Harmonic 219, 221 Hydraulic 221 Pallet 169 Power Steering 220 Pully 220 Seal 220 Steering Wheel 219 2 Jaw 221 3 Jaw 192, 221 Puller Pullers 220 Pulleys 87-88, 97-99, 374 Pump Accessories 41 Pumps Air Compressor 116 Fluid/Solvent 62 Fuel 59-62 Hydraulic 11, 15-17, 205 Jet 63 Oil 59 Parts Washers 170 Pressure Washer 104 PTO 17 Sewage 41 Suction 41-42, 64-65, 223 Submersible 41 Sump 41, 42, 64-65 Transfer 59-62, 223 Utility 65-66 Water 62-67, 348, 373 Punch - Leather 196, 268 Punches 249-251, 268, Air Punch/Flange 138 Awls 47, 271 Centre 250-251 Gasket 250 Hollow 249 Leather 196, 268 Letter 271 Metal 249 Number 271 Pin 251 Sets 195, 249-251 PVC Valves 63, 67

Q Quick Couplers 67, 106 Quick Hooks 89

R Race Jacks 161 Rams 204-205

Ramps 294, 329-330 Ratchet Straps 339-341 Ratchets 238-239 Air 135 Come-A-Longs 90 Hoists 90, 377 Offset 226 Screwdriver 226-227 Straps 339-341 Wrenches 242-243, 245 Reamers 245, 246 Reciprocating Saws 143, 156 Reels Air 123 Pressure Washer Hose 105 Welding 283 Reflectors 325-326 Regulators 126, 347 Relays 352-353 Remotes 366, 400 Replacement Sheaves 88 Resevoirs 36 Resistors 351 Respirators 198 Retaining Rings 87 Reversing Switches 76 Rims 302-303 Riveters 138, 248 Rivets 248 Rocker Switches 326, 351 Rodent Traps 47 Roll Pins 85 Roller Blade Light Kit 398 Roller Chain 96 Roller Skate Light Kit 398 Rotary Tool 143 Rope Cargo 292 Lariat 46 Lead 46 Nylon 57 Polypropylene 58, 337 Tow 337 Wire 57, 377 Rope Hoist 164 Rubber Hooks 340 Rulers 196, 263-264, 391

I N D E X

S Safety Chain 312 Safety Products Back-Up Alarm 326 First Aid Kits 199 Glasses 197-198, 395 Gloves 133, 191, 200-202, 287, 391 Goggles 197, 260, 288 Hearing Protection 199 Helmets 133, 200, 287-288 Hoods 133 Knee Pads 199 Masks 198 Reflectors 325-326 Respirators 198 Signs 325, 378 Tape 203, 325, 378 Visors 197 Welding Clothes 287 Sand 133 Sandblasters 110, 130-132 Sandblasting Accessories 130-133 Sandblasting Nozzles 130-132 Saddle Soap 47

414

I N D E X

415

Sanders Air 134 Automotive 206-207 Electric 145 Sandpaper 134, 142, 151, 207, 392 Saws Air Cut Off 138 Bandsaws 171-173 Body 139 Bow 256 Chop 144, 171 Diamond 144 Drill 149 Hacksaws 256 Hole 110, 159 Mini 153 Reciprocating 143, 156 Rod 256 Wood 393 Scissor Jack 160 Scissor Lift Cart 169 Scissors 269 Scoops 45-46 Scraping Tools 52, 196, 269-271 Screw & Bolt Gauges 393 Screw & Pin Kits 84-85 Screw Extractors 196, 276 Screw Pin Anchor Shackles 89 Screwdriver Bit Holder 228 Screwdriver Bits 193, 227, 228, 229 Screwdrivers 68, 193, 224-229, 241, 269 Scribes 271 Seal Kits 5 Seal Pullers 220 Sealants 182-185 Seats 53 Service Carts 274 Sewage Pumps 64 Sewing Awl 47 Shackle Kits 299 Shackles 89, 299 Shaft Collars 98 Sharpening Stones 271 Shears 139, 143 Sheaves 88, 100 Sheet Metal Clamps 285 Sheet Metal Gauges 263 Shop Cleanup Absorbant 187 Cotton Wipes 186 Hand Cleaners 187 Odour Neutralizers 187 Shop Towels 186 Shop Cranes 163-164 Shop Presses 173-174 Arbor 175 Frame 174 Punch & Die Kit 175 Replacement Parts 174 Shovels 52 Shutters 72 Signs 325, 378 Siren 353 Sledge Hammers 253 Slings, Lift 164 Slip Hooks 88 Snap Hooks 58, 390 Snap Rings 85 Snap Ring Pliers 194 Snatch Blocks 88 Snips 195, 249, 393

Soap 108, 187 Socket Holders 273, 274 Socket Sets 157-158, 191, 193, 227, 229, 230, 237, 239, 240-241 Sockets & Accessories 194, 213, 227, 239, 240, 241, 273, 274 Software 402 Solar Panels 329 Solder and Soldering Tools 288289, 291 Solinoids 352 Solvent/Fluid Pump 62 Space Heaters Construction 188 Kerosene 189 Propane 188 Spare Tire Carrier 339 Spark Plug Tools 214-215 Spark Plugs 93 Spatulas 391 Speaker Wire 362-363, 397 Speakers 361-362, 368, 397 Speciality Measuring Tools 262264 Speed Lift Jacks 161 Speed Reducers 95 Splicing Sleeves 50 Splined Adapter 84 Splitting Tools 50, 253 Spotlights 42, 81, 321-322 Spray Bottle 394 Spring Clamps 231 Spring Kits 86 Springs 86, 299 Leaf 299 Sprockets 95, 98 Squares 261-262 Squeegees 254, 255 Stablizer Pins 83 Stands 163 Stay Straps 83 Steel 277 Angle Iron 277 Channel Steel 277 Cold Finished (Rolled) Flat 277 Cold Finished (Rolled) Round 277 Rectangular Hollow Tube 277 Square Hollow Tube 277 Steel Sheets 277 Telescopic Square Tubing 277 Steel Wool 207 Steering Wheel Pullers 219 Stop Collars 149 Storage Apron 273 Bags 272, 389, 391, 401-402 Bins & Containers 388-389 Bit Holder 228 Magnetic Holders 273 Parts Trays 274 Service Carts 274 Socket Holders 273-274 Tongue Box 312 Tool Bags 272 Tool Boxes 271-272 Tool Rolls 273 Tote 388 Underbody Boxes 330 Wrench Holders 273 Strainers 39, 63 Strap Hooks 377

Strap Wrenches 211, 395 Straps Ratchet 339-341 Tie Down 56, 339-341 Tire 339 Tow 337 Winch 333 Stud Removers 196, 276 Submersible Pumps 41, 64-65 Suction Guns 223 Sump Pumps 42, 64-65 Support Rod 232 Suspension Tools 191, 192 Switches 326 Air Compressor 118 Automotive 382 Battery 328 Dimmer 351 Electrical 79 Fan 73, 327 Float 65 Heat 351 Hydraulic 40 Micro 351-352 Pressure 63, 118, 347 Pull 351 Reversing 76 Rocker 326, 351 Toggle 326, 327, 351 Swivel Hooks 89, 390

T T-bevel 261-262 Tachometers 77, 372 Tank De-Icers 46 Tanks Air Compressor 117 Water 41 Tap & Die Sets 275, 395 Tape Automotive 380 Caution 378 Conspicuity 325 Duct 380 Electrical 79, 380 Fish 259 Flagging 203 Magic Wrap 79 Marking 203 Measuring 258, 259 Safety 203, 378 Tarp 55 Teflon 34, 284 Tape Measures 258-259 Taper Pins 84 Taps 275 Tarp Repair & Accessories 55-56 Tarpaulins 54-56, 93 Teflon Tape 34 Terminals & Connectors 316, 317, 380 Terminal Blocks 80, 381 Testers Automotive 191-192, 213 Battery 192, 214, 316 Electric 41, 192, 213-214 Multimeters 213-214 Texture Gun 138 Thermometers 36, 214 Thermostats 72-73 Thread Gauge 276 Thread Repair 276 Threaded Inserts 276

Threaded Rod 86, 278 Threaders 247 3 Jaw Pullers 192, 221 3 Point Hitch Components 82 Tie-Downs 55-56, 339, 389 Timing Motors 350 Tin Snips 195, 249 Tire Changers 305 Tire Gauges 305 Tire Repair Kits 307 Tire Straps 339 Tire Tools Changers 305 Gauges 305 Lug Wrenches 305 Repair 307 Valve Tools 306-307 Valves 306 Tire Valves 306 Tires ATV 303 High Speed 302-303, 400 Implement 304 Rims 302-303 Tubes 294, 303-304 Turf and Garden 294, 303304, 345 Toggle Switches 326-327, 351 Tongue Box 312 Tool Apron 273 Tool Bags 272, 401 Tool Boxes 271-272, 312, 330 Tool Rolls 273 Top Link Pins 82 Torches 289 Torque Wrenches 238 Torx Sets 228-230 Tote 388 Tow Bar 312 Tow Chain 337 Tow Hooks 88 Tow Ring Assemblies 310 Tow Ropes 337 Tow Straps 337 Toy Motors 348 Tractor Mufflers 54 Tractor Seats 53 Trailer Boxes 312 Trailer Connectors 315, 325, 381 Trailer Dolly 313 Trailer Level 313 Trailer Lights 292, 323-325 Transfer Pumps 59-62, 223 Transimission Adapter 162 Transimission Jacks 162 Traps 47 Trailer Jacks 293-294, 307-309 Triangle Squares 261 Trimmer Accessories 373 Trolleys 165, 190 Trouble Lights 81 Truck Crane 330 Tubing 318 Copper 118 Inner 294, 303-304 Insulator 50 Shrink 318-319 Vinyl 69 Tubing and Pipe Tools 245-247 Turnbuckles 90 Tweezers 268, 290 Twin Clevises 90 2 Jaw Pullers 221

U Universal Joints 84, 240 Underbody Boxes 330 Underbody Guns 135 Utility Pumps 65-66

V V-Belts 99 Valve Plugs 23 Valve Seals 21 Valve Spools 23 Valve Tools 191, 209-210 Valves 108, 306 Air 117-120, 347 Aluminum 68 Hydraulic 11, 20-28, 40, 347 Pressure Washer 108 PVC 63, 67 Tire 306 Water 63, 67-68, 70 Velcro 55 Vibrating Motors 348 Vises 181-182, 392 Visors 197

W Wagons 313 Wall Anchors 374 Wall Plates 358-359 Washers 85 Water Filters 63 Water Fittings 62-63, 67-70, 373 Water Gauges 69, 107, 109 Water Hose 65, 69, 71 Water Pumps 63, 66-67, 348, 373 Water Tanks 41 Water Valves 63, 67-70 Welders Arc Welders 280 Harris Style 282 MIG Welders 280 Victor Style 282 Wire Feed Welders 279-280 Welding Brazing Rods 281, 291 Clamps 285 Cutting Kits 282 Wire 279 Welding Accessories Brushes 286 Cable 284 Carts 283 Clamps 285 Electrodes 281 Gauges 276, 284 Hammers 286 Hose 283 Hose Reels 283 Magnets 285 Markers 286 Nozzle Spray/Dip 283 Paint Markers 286 Plugs 284-285 Regulators 278 Rod Keeper 284 Welding Carts 283 Welding Tips 279, 282 Welding Cable 284 Welding Clothes 287 Welding Helmets & Goggles 287288 Welding Rods 281, 291

Wheel Chocks 307 Wheel Spinner 84 Wheels 379 Buffing 152-153 Cutting/Cut Off 142, 144, 153-155, 171 Diamond 144, 153-154 Grinding 155, 178 Hummer 142 Measuring 259 Sanding 134, 155 Turf & Garden 294, 303, 345 Wire 151, 153, 156, 178 Whip 48 Winch Straps 333 Winches Accessories 336 ATV 334 Cargo 336 Electric 333-335 Hand 293, 331-332 Hydraulic 335 Windshield Tools 207 Windshield Washer Kit 338 Wire Antenna 367 Fence 49-50 Speaker 362-363, 397 Wire Brushes 151, 153, 156, 286 Wire Crimpers 50, 318 Wire Cutters 234-235, 50, 318 Wire Loom 320, 380 Wire Rope 57, 377 Wire Strippers 50, 292, 318 Wire Twisters 50, 234 Wire Wheels 151, 153, 156, 178 Wireless Remote Kit 190 Wiring 314, 315, 316, 317, 325 Wrench Holders 273 Wrenches Adjustable 245, 392 Automotive 191, 212, 215 Chain 247 Combination 242-245 Impact 136, 145 Lug 305 Oil Filter 211, 395 Pipe 195, 247 Ratcheting 242, 243, 245 Strap 211, 395 Torque 238

I N D E X

X X-10 Lamp Module 368

Y Yard Lights 80 Yoke Pins 84

SHOP ONLINE www.princessauto.com VISIT OUR SITE FOR:

• Secure Shopping • Surplus New Items • Store Locations and Hours of Operation • Catalogue Download • Flyer Download

416