Princess Auto Catalogue #265 - Fall & Winter 2008 by Princess Auto

75th ann 265

7/14/08

2:31 PM

Page 1

Fall & Winter 2008 Catalogue • #265

Past TO

Present We Thank You for 75 Years of Patronage

Princess Auto • Fall & Winter 2008 #265

FROM

ORDER TOLL FREE:

1-800-665-8685 www.princessauto.com

HYDRAULICS & PNEUMATICS. . . 1 FARM & DRIVE COMPONENTS...48 PRESSURE WASHERS . . . . . . . 118 AIR COMPRESSORS. . . . . . . . . 125 AIR TOOLS . . . . . . . . . . . . . . . . 139 POWER TOOLS . . . . . . . . . . . . . 156 SHOP & GARAGE . . . . . . . . . . . 181 HEATERS ........................ 213 SPECIALTY TOOLS . . . . . . . . . . 228 HAND TOOLS . . . . . . . . . . . . . . 263 WELDING & STEEL. . . . . . . . . . 313 TRAILERING & WINCHES . . . . 334 SURPLUS . . . . . . . . . . . . . . . . . 403 INDEX . . . . . . . . . . . . . . . . . . . . 420

SOYFLUID ISO 46 BIODEGRADEABLE HYDRAULIC OIL • Recommended for use in hydraulic systems near water, in forestry and in other environmentally sensitive areas • Reduced wear through superior thin-film protection • Maintains stable viscosity through a wide operating temperature range • Good seal compatability • 19 litres 8221061 – Wt. 39.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8999

LED TRAFFIC BATON

TRACTOR TOOLBOX

• Heavy gauge steel • Flashing LED traffic baton • Easily mounts to tractors visible up to 1/2 mile (800 M) • Harware and brackets for universal mounting • Durable ABS body included • Uses 2 x 1.5v D batteries (not included) • Hand strap included 16" 99 8220444 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . 8213027 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . 20" 99 8213043 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . . HOSE CLAMP PLIERS

29 34

999

T-POST PULLER

Easy, one man operation pulls the post straight out of the ground without bending or twisting. 99 8212987 – Wt. 16.6 lbs. . . . . . .

• Angled jaws with rotating tips to grip clamp at any angle • Locking latch securely holds clamp in position • Includes changeable jaw tips for use with various types of flat band and ring type hose clamps 99 8223620 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

CAR COVERS

FITS CARS UP TO 17-1/2 FT IN LENGTH 210" x 70" x 47" 8180721 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FITS CARS UP TO 18-3/4" FT IN LENGTH 8210429 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999 4299 i

9 PC EXTRA LONG BALL END HEX KEY SETS

ANGLED BIT HOLDER • A must for hard-to-reach areas • Adjustable 360 degree thumb flange • 1/4" hex driver system • Durable die cast construction 8198871 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Nickel-chrome-moly steel wrenches with mirror polish, chrome plated • Ball end side of the tool is magnetic SAE: Sizes: 1/16", 5/64", 3/32", 1/8", 5/32", 99 3/16", 1/4", 5/16", 3/8" 8199515 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . METRIC: Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm 8199846 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

1399 1399

FIBREGLASS REPAIR

19 PC FLOATABLE SCREWDRIVER SET

• 6 floatable screwdrivers (3 Phillips and 3 slotted) • 6 tamper resistant Torx bits • 3 square and 3 hex bits • With floatable magnetic bit driver 8213498 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . .

C B

2499

ENGINE FOGGER A) RESIN REPAIR KIT Includes: liquid hardener, fibreglass mat, spreader, mixing stock and instructions. 236 ML 99 8205015 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . 500 ML 99 8205031 – Wt. 3.4 lbs. . . . . . . . . . . . . . . .

11 19

B) FIBERGLASS RESIN 1 litre. 8204992 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . C) LIQUID RESIN 3.78 litre. 8205007– Wt. 10.7 lbs. . . . . . . . . . . . . . .

1499

699

FUEL STABILIZER

4499

FILLER

3.78 litres. 8204976 – Wt. 8.6 lbs.

• Protects engines against rust and corrosion during storage • For use in all 2 and 4 cycle gasoline engines, including motorboats, snowmobiles, chainsaws, motorcycles, cars, snowblowers, etc. • 350 g 8210577 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2799

• Formulated to keep fuel fresh during storage • Prevents formation of gum, tarnish, rust and corrosion • Prevents fuel thickening • Absorbs moisture • Provides easier start-up after storage • For all 2 & 4 cycle gasoline and diesel engines • 325 ml 99 8210585 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

HIGH QUALITY COMPONENTS

HYDRAULICS

SHUR-LIFT HYDRAULIC CYLINDERS HIGH TOLERANCE MACHINING

OUTSTANDING HIGH PRESSURE PERFORMANCE

Unique fluid solutions powered by service

BACKED BY OUR ROYAL SERVICE PROMISE 1

5,301 LBS PUSH @ 3,000 PSI 28,863 LBS PUSH @ 3,000 PSI

14,726 LBS PUSH @ 3,000 PSI

9,424 LBS PUSH @ 3,000 PSI

HYDRAULIC CYLINDERS

SHUR-LIFT 3,000 THREADED HEAD UTILITY CYLINDERS

• 3,000 PSI max. continuous pressure • Features cross tube mounting ends Stroke Retracted Rod Wt. ITEM PRICE Length dia. (lbs.) 4" 12" 1" 7.0 1200239 139.99 6" 14" 1" 7.1 1200240 144.99 1-1/2" bore, #6 ORB ports 8" 16" 1" 8.1 1200241 154.99 3/4" dia. pinholes 10" 18" 1" 9.1 1200242 164.99 Base pineye width: 2" Rod pineye width: 2" 16" 24" 1" 12.2 1200246 189.99 5,301 lbs. push @ 3,000 PSI 20" 28" 1" 15.0 8008746 199.99 24" 32" 1" 16.1 8008773 209.99 4" 12" 1-1/4" 9.8 8008808 149.99 6" 14" 1-1/4" 10.0 8008844 159.99 8" 16" 1-1/4" 12.7 1204304 169.99 10" 18" 1-1/4" 14.2 1200131 179.99 12" 20" 1-1/4" 15.6 1204312 184.99 14" 22" 1-1/4" 17.1 1204320 199.99 2" bore, #6 ORB ports 16" 24" 1-1/4" 18.5 1204437 209.99 1" dia. pinholes Base pineye width: 2-3/4" 18" 26" 1-1/4" 20.0 1204338 214.99 Rod pineye width: 2-1/4" 20" 28" 1-1/4" 21.4 1204346 219.99 9,424 lbs. push @ 3,000 PSI 24" 32" 1-1/4" 24.4 1204353 229.99 30" 38" 1-1/4" 28.7 1204361 239.99 32" 40" 1-1/4" 30.0 1200220 249.99 36" 44" 1-1/4" 32.8 1200221 264.99 40" 48" 1-1/4" 35.8 1200222 284.99 48" 56" 1-1/4" 38.0 1204452 299.99 6" 14" 1-1/4" 13.9 8008853 169.99 8" 16" 1-1/4" 15.6 1204379 179.99 10" 18" 1-1/4" 17.2 1200223 189.99 12" 20" 1-1/4" 18.7 1200132 199.99 14" 22" 1-1/4" 20.4 1200224 219.99 2-1/2" bore, #6 ORB ports 16" 24" 1-1/4" 21.8 1200133 229.99 1" dia. pinholes 18" 26" 1-1/4" 23.0 1200225 239.99 Base pineye width: 3-1/4" 20" 28" 1-1/4" 25.0 1204387 249.99 Rod pineye width: 2-1/4" 32" 1-1/4" 28.4 1204395 259.99 14,726 lbs. push @ 3,000 PSI 24" 30" 38" 1-1/2" 38.1 1200196 284.99 32" 40" 1-1/2" 39.0 1200226 289.99 36" 44" 1-1/2" 43.8 1200227 299.99 40" 48" 1-1/2" 47.7 1200228 309.99 48" 56" 1-1/2" 55.3 1200230 349.99 8" 16" 1-1/4" 18.8 1204403 189.99 10" 18" 1-1/4" 20.6 1204429 199.99 12" 20" 1-1/4" 22.4 1200134 219.99 14" 22" 1-1/4" 24.1 1200210 229.99 16" 24" 1-1/4" 25.9 1204510 239.99 3" bore, #8 ORB ports 18" 26" 1-1/4" 27.8 1204536 249.99 1" dia. pinholes Base pineye width: 3-3/4" 20" 28" 1-1/2" 32.9 1200135 259.99 Rod pineye width: 2-1/4" 24" 32" 1-1/2" 36.9 1204593 269.99 21,205 lbs. push @ 3,000 PSI 30" 38" 1-1/2" 43.3 1200136 299.99 32" 40" 1-1/2" 48.4 1204734 319.99 36" 44" 1-3/4" 46.4 1204742 339.99 40" 48" 1-3/4" 61.4 1204759 359.99 48" 56" 1-3/4" 77.0 1200212 399.99 16" 24" 1-3/4" 36.1 1200205 269.99 3-1/2 bore, #8 ORB ports 18" 26" 1-3/4" 38.7 1200206 279.99 1" dia. pinholes 20" 28" 1-3/4" 41.4 1200207 289.99 Base pineye width: 4-1/4" 24" 32" 1-3/4" 46.5 1200213 309.99 Rod pineye width: 2-1/4" 44" 2" 66.0 1200208 389.99 28,863 lbs. push @ 3,000 PSI 36" 48" 56" 2" 88.3 1200209 439.99 NOTE: Retracted length is measured centre of pinhole to centre of pinhole.

5" bore, #8 ORB ports 1-1/4" dia. pinholes Base pineye width: 5-3/4" Rod pineye width: 2-3/4" 58,904 lbs. push @ 3,000 PSI

24"

33"

48"

57"

85.2 1200238 479.99

37,699 LBS PUSH @ 3,000 PSI

Retracted Rod. Wt. Stroke length dia. (lbs.) ITEM PRICE 8" 17" 1-1/2" 32.0 1200137 259.99 10" 19" 1-1/2" 38.6 1200231 269.99 12" 21" 1-3/4" 43.9 1200232 289.99 14" 23" 1-3/4" 47.3 1200139 299.99 4" bore, #8 ORB ports 18" 27" 1-3/4" 53.8 1204619 329.99 1-1/4" dia. pinholes 20" 29" 1-3/4" 54.0 1200233 359.99 Base pineye width: 4-3/4" 24" 33" 1-3/4" 60.0 1204635 389.99 Rod pineye width: 2-3/4" 30" 39" 2" 80.0 1200140 419.99 37,699 lbs. push @ 3,000 PSI 32" 42" 2" 84.0 1200234 449.99 36" 45" 2-1/4" 99.0 1200235 499.99 40" 49" 2-1/4" 108.0 1200236 519.99 48" 57" 2-1/4" 120.0 1200142 549.99

HYDRAULIC CYLINDERS

SHUR-LIFT 3,000 THREADED HEAD UTILITY CYLINDERS

2-1/2" 159.0 1204700 769.99

SHUR-LIFT 2,500 SNAP RING UTILITY CYLINDERS • 2,500 PSI max. continuous pressure • Features cross tube mounting ends Rod. Wt. Stroke Retracted length dia. (lbs.) ITEM PRICE 1" bore, 1/8" NPT ports 1/2" dia. pinholes Base pineye width: 1-1/2" Rod pineye width: 1-1/2" 1,962 lbs. push @ 2,500 PSI

12"

5/8" 2.9 1200066 99.99

16"

5/8" 4.0 1200068 99.99

SHUR-LIFT 3,000 THREADED HEAD IMPLEMENT CYLINDERS • 3,000 PSI max. continuous pressure • Features clevis mounting ends

1-1/2" bore #6 ORB ports 1/2" dia. pinholes 2" bore #6 ORB ports 1" dia. pinholes 2-1/2" bore #6 ORB ports 1" dia. pinholes

Rod Wt. Stroke Retracted length dia. (lbs.) 4" 14-1/4" 1" 5.7 6" 16-1/4" 1" 6.7 8" 18-1/4" 1" 7.7 12" 22-1/4" 1" 9.8 8" 20-1/4" 1-1/4" 15.6 12" 22-1/4" 1-1/4" 17.9 24" 34-1/4" 1-1/4" 26.2 8" 20-1/4" 1-1/4" 18.0 10" 20-1/4" 1-1/4" 19.8 12" 22-1/4" 1-1/4" 21.3 14" 24-1/4" 1-1/4" 23.0 16" 26-1/4" 1-1/4" 24.5 20" 30-1/4" 1-1/4" 27.4 24" 34-1/4" 1-1/4" 31.1

ITEM PRICE 1200255 1200256 1200257 1200259 1200263 1200265 1200270 1200271 1200272 1200273 1200274 1200275 1200277 1200279

129.99 134.99 139.99 144.99 179.99 199.99 249.99 189.99 199.99 219.99 239.99 244.99 269.99 279.99

HYDRAULIC CYLINDERS

SHUR-LIFT 3,000 THREADED HEAD IMPLEMENT CYLINDERS

• 3,000 PSI max. continuous pressure • Features clevis mounting ends Stroke Retracted length 8" 20-1/4" 10" 20-1/4" 12" 22-1/4" 3" bore 14" 24-1/4" #8 ORB ports 16" 26-1/4" 1" dia. pinholes 18" 28-1/4" 20" 30-1/4" 24" 34-1/4" 3-1/2" bore 12" 22-1/4" #8 ORB ports 1" dia. pinholes 10" 20-1/4" 4" bore #8 ORB ports 12" 22-1/4" 1" dia. pinholes 16" 26-1/4"

Rod. Wt. dia. (lbs.) ITEM PRICE 1-1/4" 21.8 1200280 199.99 1-1/4" 22.9 1200281 209.99 1-1/4" 24.8 1200282 229.99 1-1/4" 26.5 1200283 239.99 1-1/4" 28.3 1200284 249.99 1-1/4" 30.1 1200285 259.99 1-1/2" 34.8 1200287 269.99 1-1/2" 39.1 1200288 289.99 1-1/2"

31.6

1200291 259.99

1-1/2" 1-3/4" 1-3/4"

39.0 43.5 50.7

1200299 279.99 1200300 289.99 1200303 319.99

SHUR-LIFT 2,500 SNAP RING IMPLEMENT CYLINDERS

• 2,500 PSI max. continuous pressure • 1" bore, 1/2" pinholes • 1/8" NPT ports • Features clevis mounting ends Stroke 4" 6"

Retracted length 14-1/4" 16-1/4"

Rod dia. 5/8" 5/8"

TIE ROD HYDRAULIC CYLINDERS

2" bore 3/8" NPT ports 1" dia. pinholes

2-1/2" bore 3/8" NPT ports 1" dia. pinholes 3" bore 1/2" NPT ports 1" dia. pinholes 3-1/2" bore 1/2" NPT ports 1" dia. pinholes 4" bore 1/2" NPT ports 1" dia. pinholes

Wt. (lbs.) 3.2 3.8

ITEM 1200071 1200072

PRICE 99.99 99.99

• 2,500 PSI max. continuous pressure • Features clevis mounting ends

Stroke Retracted length Rod. dia. 6" 18-1/4" 1-1/8" 8" 20-1/4" 1-1/8" 10" 21-1/4" 1-1/8" 12" 22-1/4" 1-1/8" 18" 28-1/4" 1-1/8" 24" 34-1/4" 1-1/8" 6" 18-1/4" 1-1/8" 8" 20-1/4" 1-1/8" 10" 21-1/4" 1-1/8" 12" 22-1/4" 1-1/8" 18" 28-1/4" 1-1/8" 24" 34-1/4" 1-1/8" 8" 20-1/4" 1-1/4" 10" 21-1/4" 1-1/4" 12" 22-1/4" 1-1/4" 18" 28-1/4" 1-1/4" 24" 34-1/4" 1-1/4" 8" 20-1/4" 1-1/4" 10" 21-1/4" 1-1/4" 12" 22-1/4" 1-1/4" 18" 28-1/4" 1-1/4" 24" 34-1/4" 1-1/2" 8" 20-1/4" 1-1/4" 10" 21-1/4" 1-1/4" 12" 22-1/4" 1-1/4" 18" 28-1/4" 1-1/4" 24" 34-1/4" 1-1/2"

See page 6 for Tie Rod hydraulic cylinder pins.

Wt. (lbs.) 16.3 18.4 19.2 20.9 25.5 39.8 18.4 20.2 21.4 23.4 28.8 33.4 26.2 27.9 30.1 36.8 42.4 32.3 33.5 38.3 47.1 61.5 39.7 41.7 46.4 58.4 61.0

ITEM

PRICE

8004980 1210003 8174864 8004380 8194987 8004981 8004983 1210005 8174872 8004382 8194995 8004383 1210006 8174880 8004984 8195018 1210010 1210002 8174898 8195026 8195034 8195042 1210007 8174906 8195059 8195067 1210009

59.99 64.99 79.99 84.99 99.99 119.99 64.99 69.99 89.99 99.99 109.99 129.99 74.99 89.99 99.99 129.99 139.99 94.99 109.99 119.99 139.99 159.99 99.99 129.99 139.99 159.99 169.99

• Use to build logsplitters, presses, tube benders, forming machines, etc. • Use a rod end clevis for additional versatility (pg. 7) • Flange bolt pattern: 4.125" W x 2.05" H • Max. continuous pressure: 3,000 PSI Rod end Port Size Bore Stroke Rod dia. threading (ORB) 4" 24" 1-3/4" 1.5 x 12 8

Wt. (lbs.) 68.0

ITEM

PRICE

8144834

369.99

LOGSPLITTER CYLINDER ®

• Clevis mount with 1" pinhole in base end • Shaft end has been cut down to 1-1/2" with a 3/8" drilled pinhole • Threaded head design • 24" stroke, 2" shaft • #8 ORB ports • 3,000 PSI max. continuous pressure • Can be used as replacement on Princess Auto logsplitters or to build your own

HYDRAULIC CYLINDERS

SHUR-LIFT 3,000 FLANGE MOUNT CYLINDERS

Force (ton) @ Wt. 3,000 PSI (lbs.) ITEM PRICE 3-1/2" 14-1/2 50.7 1200248 299.99 Bore

HYDRAULIC POWER PACK CYLINDER Designed to be used with shop presses as well as a variety of lifting, spreading, bending, straightening, pushing, pulling or clamping operations. • 50 ton cap. • 6" bore, 5-1/2" stroke • 2" shaft • 11-3/4" retracted height • 3/8" NPT ports • Base plate measures: 7" x 9-1/2" • Ram speed @ 1.6 GPM: 25.4 seconds extending 22.4 seconds retracting • 3,500 PSI max. continuous pressure 99 1200060 – Wt. 61.8 lbs. . . . . . . . . . . . . . . . . REPLACEMENT END CAP 1251370 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . 14.99

Check out our shop presses on pages 194-196

379

Replacement seal kits available by special order.

HYDRAULIC PRESS CYLINDER • For building a 50 ton press • 6" bore, 10" stroke • 2" shaft • Base pineye width: 6-5/8", pinhole dia.: 1-1/4" • 3,600 PSI max. continuous pressure 99 1200083 – Wt. 80.3 lbs. . . . . . . . . . . . . . . . .

399

TECH TIPS Can a double acting cylinder be used in a single acting application? By installing a breather plug in one port to prevent air born contaminates from entering the cylinder our double acting cylinders can be converted to single acting. What would cause the head assembly to come out of a hydraulic cylinder? The piston has repeatedly hit the head assembly and mushroomed the wall of the cylinder and the head has been pushed out.

HYDRAULIC CYLINDERS

HYDRAULIC HOIST COMPONENTS ®

TRUCK & TRAILER HOIST WITH CYLINDER • Build your own truck or trailer hoist for a low cost • Upper lift arms are equipped with telescoping brackets • Lever style design to give max. lifting capacity • The hoist comes complete with a 4" bore cylinder making the hoist capable of lifting 7 tons (when installed according to manufacturer's specifications) • If heavier lifting is required a 5" bore hydraulic cylinder (item 1200079) can be used to make a 12 ton hoist 99 1200188 – Wt. 250.0 lbs. . . . . . . . . . . . . . . . . . . .

1099

HOIST CYLINDER ONLY • Threaded head design • 14" stroke, 2" shaft • 21-1/2" retracted length • #8 ORB ports • 1-1/4" dia. shaft end with 1/2" pinhole • Base pineye width: 7-1/4", pinhole dia.: 1-1/4" • 3,000 PSI max. continuous pressure • For single lever assembly 5" BORE – 12 ton capacity 1200079 – Wt. 58.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

29999

CUSTOM BUILD CYLINDER PROGRAM Designed and Built to your Specifications Delivery in 10 working days* • 3,000 PSI max. continuous pressure • Bore sizes from 1-1/2" to 6" • Strokes from 2" to 48" • Threaded head design • O-ring boss ports for superior high pressure sealing • A wide variety of port configurations, shaft sizes and mount types are available

To place an order, contact: ®

National Call Centre: 1-800-665-8685 Factory Direct: 1-204-654-5232 ext. 368 Fax: 1-204-668-4530 or visit your nearest store.

* From receipt and confirmation of order (max. 5 pieces). Not including transit time.

CYLINDER ACCESSORIES CROSS TUBE CYLINDER ENDS

Drilled for 5/16" drive-in grease nipple. Dimensions Wt. ITEM PRICE 1/2"I.D. x 1-1/2" L 0.1 8183295 4.99 3/4"I.D. x 2" L 0.4 8183303 5.49 1" I.D. x 2-1/4" L 0.6 8001456 5.99 1" I.D. x 2-3/4" L 0.7 8001457 6.49 1" I.D. x 3-1/4" L 0.9 8001458 6.99 1" I.D. x 3-3/4" L 1.0 8001460 7.49 1" I.D. x 4-1/4" L 1.2 8001461 7.99 1-1/4" I.D. x 2-3/4" L* 1.5 8001469 9.99 1-1/4" I.D. x 4-3/4" L* 2.5 8001471 11.99 1-1/4" I.D. x 5-3/4" L* 3.1 8001472 12.99 * Heavy wall

CYLINDER PINS Includes cotter and presto pin. Usable O’all Wt. Dia. length length (lbs.) 1/2" 2-3/4" 3-1/2" 0.2 3/4" 3-1/4" 4" 0.5 1" 2-3/4" 3-1/2" 0.8 1" 3-3/4" 4-1/2" 1.0 1" 4-1/4" 5" 1.1 1" 4-3/4" 5-1/2" 1.2 1" 5-1/4" 6" 1.3 1" 5-3/4" 6-1/2" 1.4 1-1/4" 4-1/4" 5" 1.8 1-1/4" 6-1/4" 7" 2.4 1-1/4" 7-1/4" 8" 2.8

ITEM PRICE 3800449 3800450 3800487 3800451 3800452 3800453 3800454 3800456 3800443 3800445 3800446

0.99 1.79 2.49 2.79 2.99 3.29 3.49 3.79 4.49 5.49 5.99

TIE ROD CYLINDER PINS • 1" dia. x 3-1/4" long • These pins are for our tie rod cylinders on page 4 8166639 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . 4.99/pr.

Use two to make a base end clevis. Dimensions 1" I.D. x 3/8" thick 1" I.D. x 1/2" thick 1" I.D. x 3/4" thick 1" I.D. x 1" thick

Wt. 0.4 0.7 1.0 1.4

ITEM PRICE 8001473 8.49 8001474 8.99 8001475 9.99 8001476 10.99

SEGMENTED STROKE LIMITERS

REPLACEMENT END CAPS FOR HYDRAULIC PRESSES

CYLINDER BREATHERS • Applications include gear boxes, oil tanks and hydraulic cylinders • 7/8" hex head • Just a drop of oil on the screen after installation will keep dust and dirt from entering your system 1291665 – 3/8" NPT 1291699 – 1/2" NPT 1290343 – #6 ORB 1290344 – #8 ORB . . . . . . . . . . . . . . . . . . . . . . . .

799

CYLINDER WELD ON CLEVIS END 1/2" dia. pinhole, 1-1/8" between clevis ends. 8183287 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

899

CYLINDER THREAD ON CLEVIS ENDS

Replaces worn end cap or can be welded to customer's own dies. Fits 30 ton press 3460052 on p.204 1250029 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . Fits 50 ton press 3460068 on p.204 1251388 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

• Contain all the seals within each cylinder • Fits all shaft sizes

2199

Wt. 0.1 lbs.

• Aluminum construction • Fits 1-1/8", 1-1/4", 1-3/8" and 1-1/2" dia. shafts • Segment thickness: 3/4", 1", 1-1/4" and 1-1/2" 99 8196263 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . .

HYDRAULIC CYLINDER REPLACEMENT SEAL KITS

Adjustable from 2-1/8" to 5-3/16". Wt. 2.4 lbs. 8163776 – Fits 1-1/8" shaft 8163784 – Fits 1-1/4" shaft . . . . . . . . . . . . . . .

HYDRAULIC CYLINDERS

ADJUSTABLE STROKE LIMITERS

MALE TANG CYLINDER ENDS

24 19

1" dia. pinhole, 1-1/8" between clevis ends *(8150781 1-1/4"). Wt. 3.0 lbs. 99 8150047 – Fits 1-1/8" shaft. . . . . . . . . . . . . . . . . 1499 8150773 – Fits 1-1/4" shaft . . . . . . . . . . . . . . . . 1999 99 8150781 – Fits 1-1/2" shaft. . . . . . . . . . . . . . . . . 2499

SHUR-LIFT 3,000 KITS Wt. Bore (lbs.) ITEM PRICE 1-1/2" 0.1 8018423 13.99 2" 0.1 8018441 16.99 2-1/2" 0.1 8018450 20.99 3" 0.2 8018478 30.99 3-1/2" 0.1 1250105 32.99 4" 0.2 1255058 33.99 5" 0.3 1255066 39.99

SHUR-LIFT 2,500 KITS Wt. Bore (lbs.) ITEM 1" 0.1 1250023 1-1/2" 0.1 1251123 2" 0.1 1251131 2-1/2" 0.1 1250058 3" 0.2 1250060 3-1/2" 0.2 1250061 4" 0.3 1250062

PRICE 9.99 11.99 13.99 18.99 23.99 24.99 27.99

HIGH PRESSURE PISTON PUMP This self-contained power unit is suited to a wide range of applications including hoists, presses, dump trucks etc. Features: PRESSURES • Built-in pressure relief UP TO • High contamination tolerance 5,000 PSI. • Bi-rotational • Double acting control valve • 1" shaft (with 1/2" woodruff key) • 3/8" NPT ports

Stocked in all stores West of Winnipeg.

Min/Max GPM @ Relief Valve Reservoir Wt. Model No. Cu.Displ. In./Rev. RPMs Max. RPM Pressure Setting (gal.) (lbs.) ITEM PRICE F98-4-21* 2.6 300-1,300 13.2 3,000 5.25 77.5 1220045 799.99 * Maximum pressure on this unit can be increased to 5,000 PSI when relief valve 7120007 is installed. Available by special order. Call 1-800-665-8685 for more information.

REPLACEMENT BREATHER CAPS For Williams pumps. 1252923 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.99

POWER PACKS

POWER PACKS ELECTRIC POWER PACK • Directional control valve is required • Ideal for presses, scissor lifts, car hoists, etc. Max. Max. Inlet/ Wt. Volt HP continuous continuous Outlet (lbs.) ITEM PRICE pressure flow ports 230 5 2,000 PSI 3.8 GPM #10 ORB 60.0 8020072 599.99

ELECTRIC POWER PACK with RESERVOIR

• On/off switch wired to motor • Directional control valve is required • Ideal for presses & compactors • Continuous duty Volt 115/ 208-230*

HP GPM 2

4.3 0.6

Relief Inlet/outlet Reservoir Duty Wt. Setting ports (GAL) Cycle (lbs.) ITEM PRICE up to 600 PSI 3/8" NPT 1.0 Cont 53.2 1270038 999.99 3,600 PSI

* Draws 22 amps @ 115 volts

ELECTRIC POWER PACK

• With reservoir and valve • Ideal for presses and compactors Volt

115/230 2

Max. continuous Max. continuous Inlet/outlet Reservoir Wt. pressure (PSI) flow (GPM) ports (GAL) (lbs.) ITEM 2,200 1.75 #6 ORB 1.75 97.4 1270099

PRICE 879.99

SINGLE-STAGE GAS POWERED HYDRAULIC POWER PACKS Portable hydraulic power packs for a wide variety of applications. 6.5 HP POWERFIST • Max. cont. pressure: 3,000 PSI • Max. cont. flow: 2 GPM • Ports: #8 ORB 8114803 – Wt. 45.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49999

IC ELECTRT STAR

13 HP HONDA GX* • Max. cont. pressure: 2,500 PSI • Max. cont. flow: 8 GPM • Ports: #10 ORB 8056889 – Wt. 95.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

144999

POWER PACKS

2-STAGE GAS POWERED HYDRAULIC POWER PACKS

• Ideal for logsplitters, presses and trash compactors • These power packs can be used anywhere • They have a gas engine coupled directly to a 2-stage high/low hydraulic pump D

Max. GPM @ 3,600 RPM PSI Low High 2.9 A 5 HP Honda GC 2,500 11.0 2.9 B5.5 HP Honda GX* 3,000 11.0 2.3 C 6.5 HP Powerfist 3,000 10.6 9 HP Honda GX* 3,000 16.0 4.0 D 6.0 E 13 HP Honda GX* 2,200 21.4 Engine

Ports Wt. (lbs.) Inlet/Outlet 1" tube/1/2" NPT 41.3 1" tube/1/2" NPT 48.3 1" tube/1/2" NPT 49.4 1" tube/1/2" NPT 79.1 1" tube/3/4" NPTF 113.6

ITEM

PRICE

1270037 1270004 8114829 1270005 8163297

549.99 849.99 499.99 1099.99 1699.99

* Engine has low oil alert and overhead valves.

HYDRAULIC POWER PACK MOUNTING PLATE

• Create your own power pack • Premade mounting holes for easy component mounting • Mount any of our gas or electric power packs and hydraulic reservoirs up to 15 gallon • Constructed from 10 gauge steel and painted gloss black 8110728 – Wt. 34.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999

CUSTOM BUILT POWER PACKS GAS ENGINES

SEE PAGE 67-68

ELECTRIC MOTORS SHAFT COUPLERS

SEE PAGES 56-57

SEE PAGE 75

MOUNTING BRACKETS

HYDRAULIC PUMPS

SEE PAGE 10

SEE PAGE 12-14

WE CAN HELP YOU BUILD A POWER PACK TO YOUR SPECIFICATIONS. • Over 150 different possible power pack combinations • Our PAL Hydraulics team members can help you make the right selection of motor/gas engine, pump mounting bracket, shaft couplers and pump to meet your flow and requirements

POWER PACKS

PUMP MOUNTING BRACKETS

ELECTRIC C-FACE MOTOR BRACKETS Frame Size Pump Mount Type 56C, 56HC 2-Bolt SAE Type A A 184TC 2-Bolt SAE Type A B 56C, 56HC 4-Bolt C 184TC 4-Bolt D

Wt. (lbs.) 2.4 4.9 2.6 5.2

ITEM 8009335 8009353 8009326 8009344

GAS ENGINE BRACKETS HP Pump Mount Type 5 2-Bolt SAE Type A E 5 2-Bolt SAE Type AA F 8-20 2-Bolt SAE Type A G 5 4-Bolt H 8-20 4-Bolt + SAE Type “AA" I 8-20 4-Bolt I

PRICE 29.99 44.99 29.99 44.99

Wt. (lbs.) 1.9 1.9 3.8 1.3 3.8 3.7

ITEM 8009308 8173700 8001759 2400463 2400003 8110751

PRICE 34.99 39.99 49.99 34.99 49.99 44.99

FOOT MOUNT BRACKETS Pump Mount Type Wt. (lbs.) ITEM PRICE 4-Bolt 0.8 8039712 24.99 J 1.7 8009317 24.99 K 2-Bolt SAE Type A J L

PUMP MOUNTING PLATE Pump Mount Type Wt. (lbs.) ITEM PRICE 7.7 8076028 29.99 L 2-Bolt SAE Type B

12 VDC HYDRAULIC POWER PACKS

N M M) HEAVY DUTY POWER PACK • Heavy duty motor and solenoid allows the power pack to have a longer runtime Motor Amp draw *Duty cycle 85 100% 150 45% 200 25% • Designed for applications requiring auxiliary hydraulic power • Typical applications include truck hoist, mobile crane and boom equipment • Integrated relief valve for component protection • External valving is required 99 8196255 – Wt. 59.9 lbs. . . . . . . . . . . . . . . *Duty Cycle is based on runtime of 5 minutes

899

N) PUMP/MOTOR POWER PACK • Designed for applications requiring auxiliary hydraulic power • Applications include truck hoist, mobile crane and boom equipment • Integrated relief valve for component protection • External valving and reservoir required • Can be made into a lift-lower-hold power pack for car/truck hoists, scissor lifts, etc. by installing release cartridge 8203390* and solenoid 8001494* 99 8197477 – Wt. 24.1 lbs. . . . . . . . . . . . . . . *Call your local store or Gary at 1-204-654-5209.

369

Flow rating Flow rating Relief Relief range Reservoir size (gal.) @ 0 PSI @ 2,500 PSI setting (PSI) (PSI) 4.0 2,500 500 to 3,000 M Heavy duty 1.7 GPM 0.9 GPM Type

N Pump/motor 3.6 GPM

1.0 GPM

2,500

500 to 3,000

–

Ports

ITEM

3/8" NPT 8196255 #8 ORB inlet #6 ORB outlet 8197477

POWER PACKS

12 VDC HYDRAULIC POWER PACKS

A • Use with single-acting hydraulic cylinders • Includes remote switch with 20 ft. of cord

• Use with single-acting hydraulic cylinders • Includes remote switch with 20 ft. of cord

• Use with double-acting hydraulic cylinders • Includes remote switch with 20 ft. of cord

• Use with single-acting hydraulic cylinders • Includes remote switch with 10 ft. of cord

• Use with double-acting hydraulic cylinders • Includes remote switch with 10 ft. of cord Flow rating @ 0 PSI Single acting 2.8 GPM Single acting 2.8 GPM Single acting 2.5 GPM Double acting 2.8 GPM Double acting 2.8 GPM Snow plow 2.4 GPM Type

A B C D E F

• Operates all functions of a power operated angling snowplow • Lift-hold-lower function with “float” • Cross-over reliefs protect the system if the blade becomes obstructed • Includes remote switch with 10 ft. cord

Flow rating Relief Relief range Reservoir ITEM PRICE size (gal.) Ports @ 2,500 PSI setting (PSI) (PSI) 0.75 1.3 GPM 2,500 500-3,000 #6 ORB 8002286 449.99 2.5 1.3 GPM 2,500 500-3,000 3/8" NPT 8102501 549.99 2.6 2.3 GPM 2,900 725-2,900 3/8" NPT 8145823 399.99 0.75 1.3 GPM 2,500 500-3,000 #6 ORB 8106148 549.99 1.3 GPM 2,500 500-3,000 0.75 #6 ORB 8178998 449.99 0.4 1.1 GPM 2,000 1,000-2,000 1/4" NPT 8002291 899.99

HAND CONTROLS

2.5 GALLON POWER PACK RESERVOIR

• 12VDC power pack hand controls • Two normally open, (SPST) single pole, single throw switches • Pre-wired with a 20 ft cord • Switch specifications: 5A @ 12VDC 8002439 – Single-acting

Wt. 1.2 lbs. .................... Replace existing reservoir when extra oil capacity 8002441 – Double acting is needed. 99 Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . 8002505 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . .

119

3499 3999

WARNING: FAILURE, IMPROPER SELECTION OR IMPROPER USE OF ANY HYDRAULIC PRODUCTS AND/OR SYSTEMS OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE.

POWER PACKS

A compact, efficient way to provide a source of hydraulic power for most trucks and off-road vehicles. Typical applications are snow removal equipment, grain augers and conveyors, tow trucks, etc

12 VDC ELECTROMAGNETIC CLUTCH PUMP PUMP

CLUTCH

Features: • High strength alloy steel gear and shaft set • Doweled, high strength, 3-piece cast iron construction Specifications: • Mounting type: SAE Type “A” bracket with pad mount • Rotation: clockwise • Ports (rear and side): #20 ORB inlet, #12 ORB outlet • Max. speed: 3,000 RPM 10 GPM @ 1,000 RPM @ 2,500 PSI 99 8045783 – Wt. 33.6 lbs. . . . . . . . . . . . . . . .

• Turn on the clutch to engage, turn off to disengage • Clutch draws 3.9 amps when engaged • Solid forged rotor to maximize torque and prevent internal parts separation • Forged machined pulley resists damage from abusive environments Voltage must not drop below 12 VDC or clutch will slip and become damaged. V-BELT AA GROOVE 99 8045734 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . .

169

349

HYDRAULIC PUMPS RONZIO HYDRAULIC GEAR PUMPS Features Benefits High speed Direct drive from gas engine Reversible Useful for more than one application

Displ. Model # (Cu. In. /Rev) PZ2CG04 0.269 PZ2CG06 0.384 PZ2CG08 0.498 PZ2CG11 0.69 PZ2CG14 0.882 PZ2CG17 1.03 PZ2CG20 1.23 PZ2CG25 1.57 PZ2CG31 1.92 *At a 5% duty cycle.

Pressure (PSI) Max. Cont. Peak* 4,350 5,220 4,350 5,220 4,350 5,220 4,350 5,220 4,350 5,220 3,910 4,780 3,330 4,200 2,610 3,330 2,320 2,900

Max. GPM

• 3/4" shaft with keyway • CW rotation is reversible with minor changes to pump configuration (instructions included) • Pump has SAE A, 2-bolt flange • Cast iron end caps and steel gears with an aluminum gear housing RPM In/Out Port Wt. ITEM PRICE Min. Max. Sizes(ORB) (lbs.)

6.40 9.14 10.13 11.95 12.60 13.38 15.97 20.39 22.44

1,000 700 550 450 400 350 300 250 200

5,500 5,500 4,700 4,000 3,300 3,000 3,000 3,000 2,700

10/10 10/10 10/10 10/10 10/10 12/10 12/10 12/10 12/10

8.3 8.0 8.7 9.3 9.8 9.5 10.3 10.7 11.2

8025102 8025111 8025120 8025139 8025148 8025166 8025175 8025184 8025193

199.99 204.99 209.99 214.99 219.99 224.99 229.99 234.99 239.99

PUMP TO MOTOR CONVERSION KIT Converts pumps listed above to unidirectional motors. 8003893 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PRINCE HYDRAULIC GEAR PUMPS

2999

Features

Benefits Increased flow capacity, Non-symmetrical gears quieter running Handle heavy loads, low PTFE composite shaft speeds and high bearings levels of contamination • 7/8" shaft with keyway • Pump has SAE type “B” 2-bolt flange • Aluminum housing with steel gears • CCW Rotation

Displ. Max. Cont. (Cu. In./Rev.) Pressure SP25A44..L 2.697 3,000 SP25A52..L 3.179 2,500 Model #

Max. GPM 33.61 39.63

Max. RPM 3,000 3,000

In/Out Port Sizes (ORB) #20/#16 #20/#16

Wt. (lbs.) ITEM 14.1 8006589 15.0 8006591

PRICE 319.99 329.99

HYDRAULIC PUMPS

MP FILTRI HYDRAULIC GEAR PUMPS • All aluminium construction with steel gears • Clockwise rotation • 1/2" shaft with keyway • SAE AA, 2 bolt mounting flange • Inlet port: #8 ORB, Outlet port: #6 ORB Displ. Max. Cont. Max. Max. Speed (Cu. In./Rev) Pressure (PSI) GPM (RPM) 0.07 3,625 1.5 5,000 0.10 3,625 2.1 5,000 0.12 3,625 2.6 5,000 0.16 3,625 3.4 5,000 0.20 3,625 4.3 5,000 0.25 3,625 4.3 4,000 • 3/4" shaft with keyway • SAE A, 2 bolt mounting flange • Inlet port: #16 ORB, Outlet port: #12 ORB Displ. Max. Cont. (Cu. In. Pressure Max. Max. Speed GPM (RPM) /Rev) (PSI) 1.95 3,650 25.3 3,000 2.44 3,650 31.6 3,000

Weight

ITEM

PRICE

2.7 2.8 2.9 2.9 3.1 3.1

8155350 8155368 8155376 8155384 8155392 8155400

89.99 89.99 89.99 99.99 99.99 99.99

Wt. ITEM (lbs.)

PRICE

11.5 8155418 179.99 12.2 8155426 179.99

HALDEX 2-STAGE PUMPS IDEAL FOR LOGSPLITTERS, PRESSES, & TRASH COMPACTORS • Shaft: 1/2" dia. x 1-1/2" long (5/8" dia. on 1222173) • Mount: 4-bolt (2-bolt SAE on 1222173) • Ports: 1" tube inlet (1" NPTF on 1222173), 1/2" NPTF outlet (3/4" NPTF on 1222173) • Rotation: clockwise • Max. continuous pressure: 3,000 PSI • Adjustable unloader range: 400 to 900 PSI (400 to 700 PSI on 1222173), set @ 650 PSI • 500 to 4,000 RPM range

B A

Low Pressure Gear High Pressure Low Pressure High Pressure HP Displacement Gear Displacement Flow Flow Required 0.194 cu. in. 10.6 GPM 2.9 GPM 5 HP A 0.517 cu. in. 0.258 cu. in. 16.0 GPM 4.0 GPM 8 HP A 0.776 cu. in. B 0.930 cu. in. 0.465 cu. in. 22.0 GPM 6.1 GPM 16 HP

Wt. (lbs.) 8.4 9.4 19.0

ITEM PRICE 1221118 199.99 1221555 219.99 1222173 499.99

HYDRAULIC PUMPS/MOTORS • These compact pumps/motors are built with cast iron bodies and hardened steel gears • Suitable for use in agriculture, construction, and material handling • Bi-rotational, 1/2" shaft, 1-1/2" long, 4-bolt flange with 1-3/4" pilot flange • #4 ORB case drain port must be returned to tank when used as a motor if the return line pressure exceeds 50 PSI • Can be belt driven with a max. sideload of 150 lbs. • Max. RPM: Pump 4,000 RPM/Motor 5,500 RPM Pressure Rating Flow Displacement Port Size Wt. (cu. in./rev) Continuous Intermittent @ 1,800 RPM @ 3,600 RPM (ORB) (lbs.) ITEM (PSI) (PSI) (GPM) (GPM) 0.129 3,000 4,000 1.0 2.0 8 4.6 1220030 0.258 2,300 4,000 2.0 4.0 8 4.6 1220031 0.388 1,600 2,500 3.0 6.0 10 5.5 1220032 0.517 1,200 2,000 4.0 8.0 10 5.5 1220033

PRICE 169.99 174.99 179.99 184.99

TECH TIP Why do some hydraulic pumps/motors have case drain ports and others do not? In hydraulic pumps and motors a small amount of oil slips by the gears for lubrication and sealing purposes. This oil is collected in the drainage pocket and must be drained to tank. Some manufacturers do this with internal cavities, others with external ports. If the oil is not drained, pressure will build up in the cavity and the shaft seal will leak.

HYDRAULIC PUMPS

P.T.O. PUMPS

Ideal for use with front end loaders on tractors without integral hydraulics, landscape equipment and backhoes. Slips onto tractor P.T.O. shaft, no gearbox required. • High tensile cast iron end plates and aluminum centre gear housing • Self-adjusting wear plates on both sides of the gears offset wear and expansion • #16 ORB inlet and #12 ORB outlet ports • 1-3/8" dia., 6-tooth internal splined drive shaft • Standard speed: 540 RPM for 6-tooth shaft, max. 600 RPM Displacement Max. PSI Flow @ 540 RPM Wt. (lbs.) ITEM PRICE @ 2,000 PSI 5.7 cu. in./rev. 2,250 11.4 GPM 35.9 8005268 679.99 9.9 cu. in./rev. 2,250 21 GPM 40.0 8005213 729.99

GEROTOR MOTOR • Compact and lightweight • High speed • Bi-rotational • Shaft dia.: 9/16" • Ports: #10 ORB • Max. speed: 5,000 RPM Displ. Max. Cont. Flow (GPM) Max. Shaft Side Wt. (Cu. in. Pressure Required per Torque Load* (lbs.) ITEM PRICE /Rev.) (PSI) 1,000 RPM (in.-lbs.) (lbs.) MGG20025 0.580 2,000 2.51 184 70 2.8 1220383 259.99 * Maximum permissible shaft side load @ 2,500 RPM and 1,000 PSI. Model #

HYDRAULIC ORBIT MOTORS

CHAR-LYNN MOTORS offer high efficiency leak free performance over a wide range of applications including agriculture, forestry, mining, construction, and marine. Features: • Instantly reversible • 1" shafts, 1/2" NPT ports • Max. continuous flow: 15 GPM (except for models with 2.8 cu. in./rev. displ., which are 12 GPM)

2-BOLT

4-BOLT

Model # 101-3466 101-3467 101-3468 101-3469 101-3470 101-3471 101-3472 101-3473 101-3480 101-3481 101-3482 101-3483

Displ. (Cu. In. /Rev.) 2.8 4.5 5.9 9.7 11.3 14.1 17.9 22.6 2.8 4.5 5.9 9.7

Max. Cont. Pressure (PSI) 1,800 1,800 1,800 1,650 1,600 1,450 1,350 1,250 1,800 1,800 1,800 1,650

Max. Speed (RPM) 969 760 585 353 304 243 192 152 969 760 585 353

Max. Torque (in.-lbs.) 650 1,044 1,368 2,059 2,343 2,669 3,110 3,604 650 1,044 1,368 2,059

Wt. (lbs.)

ITEM

PRICE

11.0 11.4 11.6 12.3 12.6 13.1 13.8 14.5 11.8 11.7 12.4 13.1

8179558 8179566 8179574 8179582 8179590 8179608 8179616 8179624 8179632 8179640 8179657 8179665

229.99 239.99 249.99 259.99 269.99 279.99 299.99 329.99 229.99 239.99 249.99 259.99

HIGHER TORQUE, HIGHER PRESSURE The CHAR-LYNN 2000 Series disc valve motor is truly a high torque, low speed hydraulic motor. Ideal for agricultural equipment, skid steer attendants, bush cutters and many other applications. Features: • Instantly reversible • 1-1/4" shaft, #10 ORB ports • Max. continuous flow: 20 GPM • #4 ORB case drain port* *Should be used when more than 1 motor are connected in series.

Max. Cont. Max. Speed Max. Torque Wt. Model # (Cu.Displ. In./Rev.) Pressure (PSI) (RPM) (in.-lbs.) (lbs.) 104-3895 18.7 3,000 246 6,750 27.2

ITEM

PRICE

8179673

459.99

SEE PAGE 18 FOR VALVE REPLACEMENT PARTS & ACCESSORIES

RD 2500 SERIES Specifications: • Max. continuous pressure: 3,000 PSI • Max. continuous flow: 20 GPM • Relief preset at 1,500 PSI and adjustable from 500 to 3,000 PSI • Max. return line pressure: 150 PSI • Ports (NPT): 3/4" inlet/outlet, 1/2" work ports • Open centre (Can be converted to closed centre) A) SINGLE SPOOL 3-position, 4-way. 8107179 – Wt. 9.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

13999

B) SINGLE MOTOR SPOOL WITH DETENT • 3-position, 4-way • Workports are connected to tank in the neutral position 8107187 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

14999

HYDRAULIC PUMPS

MONOBLOCK DIRECTIONAL HYDRAULIC CONTROL VALVES

RD 5000 SERIES Specifications: • Max. continuous pressure: 3,000 PSI • Relief preset at 2,000 PSI and adjustable from 1,500 to 3,000 PSI • Max. return line pressure: 500 PSI • Ports (NPT): 3/4" inlet/outlet, 1/2" work ports • Open centre • In the detented 4th position (float) the work ports are connected to tank, allowing the cylinder to float or the motor to freewheel • Can be converted to closed centre or power beyond (with optional conversion plugs) C) SINGLE SPOOL • 3-position, 4-way • Max. continuous flow: 30 GPM 8107328 – Wt. 14.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

17999 D

D) 2-SPOOL • 3-position, 4-way • Max. continuous flow: 25 GPM 8107344 – Wt. 23.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

28999

E) 3-SPOOL • 3-position, 4-way • Max. continuous flow: 25 GPM 8107351 – Wt. 35.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

39999

F) 2-SPOOL WITH FLOAT SPOOL • 1st spool 4-position, 4-way, 2nd spool 3-position, 4-way • Max. continuous flow: 30 GPM 8107336 – Wt. 24.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

29999

DIRECTIONAL CONTROL VALVES

BM SERIES MONOBLOCK DIRECTIONAL CONTROL VALVES See page 18 for valve replacement parts and accessories.

B DETENT FLOAT POSITION

STANDARD

C JOYSTICK Features: • Standard 3-position, 4-way/spring return to neutral unless otherwise stated • Open centre • Max. return line pressure: 1,100 PSI • Relief valve pre-set @ 2,100 PSI, adjustable from 1,500 PSI to 3,750 PSI • Control handles can be mounted in vertical or horizontal position • Max. continuous pressure: 3,600 PSI

BM 20 SERIES

BM 20

Max. continuous flow Peak flow Top inlet/outlet and work ports Side inlet/outlet ports Wt. (lbs.) Single spool 3.7 A Double spool 5.5 A Three spool 7.4 A

ITEM 1249531 1249549 1249556

4.5 GPM 6.6 GPM #6 ORB #8 ORB PRICE 139.99 219.99 299.99

BM 30 SERIES BM 30

Max. continuous flow Peak flow Top inlet/outlet and work ports Side inlet/outlet ports Wt. (lbs.) Single spool 4.5 A

ITEM 1249598

9 GPM 12 GPM #8 ORB #8 ORB PRICE 139.99

BM 40 SERIES

BM 40

Max. continuous flow Peak flow Top inlet/outlet and work ports Side inlet/outlet ports

9 GPM 12 GPM #8 ORB #10 ORB Wt. (lbs.) ITEM PRICE Single spool 5.6 1249721 159.99 A Double spool 8.3 1249739 239.99 A Three spool 11.4 1249747 329.99 A Four spool 14.3 1249754 419.99 A 8.9 1249713 269.99 B Double spool (float/standard) 8.4 8006338 299.99 C Double spool with joystick

BM 70 SERIES BM 70

Max. continuous flow Peak flow Top inlet/outlet and work ports Side inlet/outlet ports Wt. (lbs.) Single spool 10.4 A Double spool 15.3 A Three spool 20.9 A

17 GPM 24 GPM #10 ORB #12 ORB ITEM PRICE 1249796 229.99 1249804 329.99 1249812 429.99

DIRECTIONAL CONTROL VALVES

MONOBLOCK DIRECTIONAL CONTROL VALVES SINGLE SPOOL • Double acting • Max. continuous pressure: 2,500 PSI • Max. continuous flow: 20 GPM • Inlet/Outlet Ports: 3/4" NPT • Work Ports: 1/2" NPT 8126070 – Wt. 8.5 lbs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HYDR

AULIC

9999

ROTARY ACTUATED • This valves handle rotates 90° each side of cente • No spring centering so the handle will remain in whatever position it is placed • The valve has excellent flow metering characterisics which makes it ideal for motor or cylinder applications where accurate speed control is required • Max. continuous pressure: 2,500 PSI • Max. continuous flow: 20 GPM • Inlet/Outlet ports: 3/4" NPT • Work Ports: 1/2" NPT 99 8126088 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HYDR

S AULIC

179

HYDRAULIC KICK-OFF VALVES • Ideal for logsplitters • Spring return one direction, detented the other • Detented return position allows hands-free operation while the cylinder is retracting and automatically shifts the spool to neutral at the end of the cylinder's stroke • Open centre

A) Max. continuous pressure: 2,750 PSI • Relief valve set at 2,200 PSI • Max. continuous flow: 25 GPM • Kick-off pressure adjustable from 1,000 to 3,000 PSI • Work ports: 1/2" NPT • Inlet/outlet ports: 3/4" NPT 99 8123176 – Wt. 10.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

119

B) Max. continuous pressure: 2,750 PSI • Relief set at 2,250 PSI • Max. continuous flow: 25 GPM • Kick-off pressure adjustable from 1,000 to 2,000 PSI • Work ports: 1/2" NPT • Inlet/Outlet ports: 3/4" NPT 8107203 – Wt. 10.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

12999

C) Max. continuous pressure: 2,500 PSI • Relief set at 2,000 PSI • Max. continuous flow: 20 GPM • Work ports: 1/2" NPT • Inlet/Outlet ports: 3/4" NPT 1242296 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S AULIC HYDR

11999

D) HANDLE BRACKET Replacement handle bracket for 1242296. 7120082 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C D

Can I convert my hydraulic control valve to single acting by simply plugging one of the work ports?

TECH TIPS

While this will work, it will also result in a lot of heat build up within the hydraulic system because oil will go over the relief valve in one of the spool positions. The best solution is to either replace the valve or change to a single acting spool provided the design of the valve will allow it.

DIRECTIONAL CONTROL VALVES

ACCESSORIES FOR HYDRAULIC CONTROL VALVES D FULLY BACKED BY OUR ROYAL SERVICE PROMISE

ITEM PRICE A) SINGLE ACTING SPOOLS BM20 valves BM30/40 valves BM70 valves B) MOTOR SPOOLS BM20 valves BM30/40 valves BM70 valves C) RELIEF VALVE PLUGS BM20 valves BM30/40 valves BM70 valves D) CLOSED CENTRE PLUGS BM20 valves BM40 valves BM70 valves

1259027 24.99 1259092 26.99 1259159 38.99 1259019 26.99 1259084 27.99 1259142 38.99 1250032 19.99 1259076 24.99 1250033 29.99 1250107 15.99 1259068 19.99 1259134 21.99

F A C Accessories are shown as optional parts for a standard valve. NOTE: ALL THESE ACCESSORIES ARE EASILY FIELD INSTALLED.

ITEM PRICE E) POWER BEYOND ADAPTERS BM20 valves 1259001 19.99 BM40 valves 1259050 21.99 BM70 valves 1259126 29.99 F) DETENT KITS BM20 valves 1259035 26.99 BM30/40 valves 1259100 29.99 BM70 valves 1259167 31.99

REPLACEMENT PARTS & ACCESSORIES for RD 2500 SERIES VALVES

HANDLE KIT 8001688 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

REPLACEMENT 99 SPOOL SEAL KIT 8107435 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

599

REPLACEMENT PARTS & ACCESSORIES for RD 5000 SERIES VALVES

G) CLOSED CENTRE PLUG 8107393 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . H) POWER BEYOND ADAPTER 8107385 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . I) 3-POSITION DETENT KIT 8107369 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . J) HANDLE KIT 8107419 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . K) SINGLE SPOOL SEAL KIT 8107427 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

2199 2199 5999 1299 1199

WARNING: FAILURE, IMPROPER SELECTION OR IMPROPER USE OF ANY HYDRAULIC PRODUCTS AND/OR SYSTEMS OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE.

Princess Auto provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change without notice.

D03 & D05 DIRECTIONAL CONTROL VALVES AB

D03 SPECIFICATIONS: • Max. continuous pressure: 5,000 PSI • Max. continuous flow: 16 GPM *Must be used with subplate

H-Spool

Closed Centre

Tandem Centre

A) 12 VDC ACTIVATION Wt. 4.6 lbs.

8168478 – H-Spool 8046831 – Tandem Centre 8046807 – Closed Centre . . . . . . . . . . . .

12999

B) 110 VAC ACTIVATION Tandem centre with DIN connectors. 8168544 – Wt. 0.1 lbs. . . . . . . . . . . . . . .

17999

D05 SPECIFICATIONS: • Max. continuous pressure: 4,500 PSI • Max. continuous flow: 28 GPM *Must be used with subplate

C) 12 VDC ACTIVATION Wt. 12.9 lbs.

8093080 – H-Spool 8093072 – Tandem Centre 8093106 – Closed Centre . . . . . . . . . . .

17999

DIRECTIONAL CONTROL VALVES

SOLENOID OPERATED VALVES

D05 MODULAR RELIEF VALVE • Mounts between the solenoid valve and subplate assembly • Protects against over-pressuring of the valve and the actuators it controls • Adjustable pressure range: 1,000 to 3,000 PSI • Max. continuous flow: 18.5 GPM* 99 8093148 – Wt. 7.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *Rated relief to tank flow.

DIN CONNECTORS Replacement for 12 VDC D03 and D05 solenoid valves. 8045791 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement for 110 VAC D03 solenoid valve (8168544). 8168551 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SOLENOID VALVE SUBPLATES

699 699

E F

D Mounts DO3 or DO5 solenoid valves to provide inlet/outlet/workport porting. D) SINGLE D03 VALVE SUBPLATE #6 ORB ports 99 8163438 – BOTTOM PORTING . . . . . . . . . . .

24 2499

8163453 – SIDE PORTING . . . . . . . . . . . . . . . E) MULTIPLE D03 VALVE MANIFOLDS • Series circuit • #10 ORB inlet/outlet ports, #8 ORB work ports • #6 ORB gauge port • Relief cavity with plug (Relief cartridge can be added) 99 8163503 – 2 STATION . . . . . . . . . . . . . . . . . . .

79 99 8163529 – 3 STATION . . . . . . . . . . . . . . . . . . . 99 99 8163537 – 4 STATION . . . . . . . . . . . . . . . . . 129 F) SINGLE D05 VALVE SUBPLATE #8 ORB ports 8163487 – BOTTOM PORTING . . . . . . . . . . . 8163495 – SIDE PORTING

H G

G) MULTIPLE D05 VALVE MANIFOLDS • Series circuit • #12 ORB inlet/outlet ports, #8 ORB work ports • #6 ORB gauge port • Relief cavity with plug (Relief cartridge can be added) 99 8163545 – 2 STATION . . . . . . . . . . . . . . . . .

119 99 8163677 – 3 STATION . . . . . . . . . . . . . . . . . 159 99 8163685 – 4 STATION . . . . . . . . . . . . . . . . . 199

H) RELIEF CARTRIDGES • Use in multiple section D03 and D05 manifolds to prevent over pressuring • Adjustable from 100-3,000 PSI 99 99 8163701 – D03 . . . . . . . . . . . . . . . . . . . . . . . . . .

39 99 . . . . . . . . . . . . . . . 39

89 99 8163719 – D05 . . . . . . . . . . . . . . . . . . . . . . . . 129

HYDRAULIC KICK-OFF VALVES

SOLENOID OPERATED VALVES

• Max. continuous pressure: 3,000 PSI • Anodized aluminum bodies • 1 pc. cartridge housing ensures internal concentricity • Weatherproof, high wattage 12 VDC coils 2-POSITION, 4-WAY REVERSING SOLENOID SPOOL VALVE • Max. continuous flow: 9 GPM • Free flow between ports 2 and 1, 3 and 4 when the solenoid is de-energized • Free flow between ports 2 and 3, 1 and 4 when the solenoid is energized • Designed to operate double acting cylinders, pilot circuits and bi-directional motors • Ports: #8 ORB 99 8219602 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . .

2-POSITION, 3-WAY SOLENOID SPOOL VALVE • Max. continuous flow: 11 GPM • Free flow between ports 2 and 3 when the solenoid is de-energized • Free flow between ports 1 and 2 when the solenoid is energized • Acts similar to a 3-way 2-position manual selector valve • Ports: #12 ORB 8219594 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . .

169

2-POSITION, 2-WAY SOLENOID POPPET VALVE with FLOW CONTROL 2

8999

OPTIONAL 115 VAC SOLENOID COIL 0.26 amps with DIN connector. 8033371 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . .

3-POSITION, 4-WAY TANDEM CENTRE SOLENOID SPOOL VALVE • Max. continuous flow: 11 GPM • Free flow between ports 2 and 1, 3 and 4 when the push solenoid is de-energized • Free flow between ports 2 and 3, 1 and 4 when the pull solenoid is energized • Designed to operate double acting cylinders, pilot circuits and bi-directional motors, etc. • When both solenoids are de-energized, work ports are blocked and ports 2 and 4 are connected • Ports: #8 ORB 99 8219610 – Wt. 2.8 lbs. . . . . . . . . . . . . .

3999

• Max. continuous flow: 2.5 GPM • Normally closed • Blocked flow from ports 1 to 2, restricted flow from 2 to 1 when de-energized • Pressure compensated adjustable flow from 1 to 2 when energized (no reverse flow) • Ports: #6 ORB 99 8219560 – Wt. 1.0 lbs. . . . . . . . . . . . . . . .

HAND CONTROL with MICRO SWITCHES Use to control solenoid operated directional control valves, selector valves, powerpacks etc.

• Internal 3/8" thread for mounting • Two normally open, (SPST) single pole, single throw momentary switches • Pre-wired with 18" leads • Micro switch specifications: 3A @ 30 VDC, 3A @ 250 VAC 99 8002552 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

• Two normally open, (SPST) single pole, single throw switches • Pre-wired with a 20 ft cord • Switch specifications: 5A @ 12VDC 8002439 – Single-acting Wt. 1.2 lbs.

....................

8002441 – Double acting Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . .

34 39

• Internal M12x1.25 thread for mounting • Four normally open, (SPST) single pole, single throw momentary switches • Pre-wired with 34" leads • Micro switch specifications: 3A @ 30VDC, 3A @ 250 VAC 99 8151367 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . .

129

TOGGLE SWITCHES

• DPDT (double pole, double throw) • Rated at: 20A @ 12 VDC 15A @ 125 VAC 10A @ 250 VAC • Metal toggle lever, stand and screw terminals with M3 screws • Can be used for power pack and solenoid valve activation 99 Wt. 0.1 lbs. 8161721 – On/off/on 99 99 8161713 – On/off/on (momentary) . . . . . . . . . .

D Valve not included

A) JOYSTICK REMOTE VALVE CONTROL • Shift 2 hydraulic spools with 1 control • Weatherproof control can be mounted on interior or exterior of vehicle 8000977 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . B) SINGLE AXIS REMOTE CONTROL • Can be mounted individually or stacked for multiple functions • Weatherproof control can be mounted on interior or exterior of vehicle 8000986 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . .

D) VALVE CONNECTION KITS Manuf. Valve series Wt. (lbs.) BLB BM20 0.3 99 BLB BM40 0.2 BLB BM70 0.2 Prince RD5000 0.4

149

5999

C) REMOTE CONTROL CABLES 6 mm male cable end with 1.3" travel Length Wt. (lbs.) ITEM PRICE 59.99 39" 0.7 8000995 59" 0.9 8001002 64.99 78" 1.7 8001020 69.99 118" 1.7 8001057 79.99 157" 2.2 8001066 89.99

G) KNOB • 2" dia. black knob for use on remote control cables, etc. • 3/8" 24-thread 99 3891348 – Wt. 0.1 lbs. . .

PRICE 29.99 29.99 29.99 47.99

E) CLEVIS CONTROL CABLE ENDS Threading Pin dia. Wt. (lbs.) ITEM PRICE 6 mm 6 mm 0.1 8149932 7.99 6 mm 8 mm 0.1 8149957 8.99 F) BALL JOINT CONTROL CABLE ENDS Internal Stud Threading Threading Wt. (lbs.) ITEM PRICE 6 mm 6 mm 0.1 8149965 9.99 6 mm 8 mm 0.1 8149981 12.99

ITEM 8031863 8001075 8001084 8145203

SOLENOID OPERATED VALVES

These push pull remote control cable systems can be used to control a wide variety of hydraulic components including valves, PTO pumps, piston pumps etc.

HYDRAULIC REMOTE CONTROL SYSTEMS

H) REMOTE CONTROL CABLES • 3" travel • 1/2" - 20 mounting threads • .091" cable end 10 ft. 99 3890492 – Wt. 2.5 lbs. . . 15 ft. 99 3890493 – Wt. 3.0 lbs. . .

I) PIVOT PIN Fits up to 3/16" lever thickness with a 1/4" hole dia. 19 3890502 – Wt. 0.1 lbs. . .

26 32

K M J) KNOB • 2" dia. black knob for use on remote control cables, etc. • 1/4" 28-thread 99 8183378 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

K) BULK HEAD MOUNT CONTROL CABLES • 3" travel • 5/8" - 18 mounting threads • 1/4"-28 male cable end Length Wt. (lbs.) 36" 1.4 48" 1.5 60" 2.0 72" 2.1 84" 2.3

ITEM 8183428 8183436 8183444 8183451 8183469

PRICE 35.99 36.99 37.99 38.99 39.99

CONTROL CABLE ENDS Wt. 0.1 lbs.

L) Fits up to 5/16" lever thickness with 1/4" hole dia. 8183386 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M) CLEVIS with PIN 3880036 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N) BALL JOINT ROD END with STUD 3870009. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O) ROD END with BEARING & STUD 3870020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P) ROD END with BEARING 3870015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399 449 299 899 899

SOLENOID OPERATED VALVES

ROD ENDS

ADJUSTABLE YOKE with PIN a

Wt. 0.1 lbs.

Thread Size 1/4" - 28 NF 5/16" - 24 NF 3/8" - 24 NF 1/2" - 20 NF

ITEM PRICE 3870009 2.99 3870010 3.29 3870012 4.49 3870013 8.49

ITEM PRICE 3870020 8.99 3870021 9.99 3870022 11.99 3870023 19.99

1/4" - 28 NF THREAD a: 2", b: 1-1/4", c: 9/32". 3880036 – Wt. 0.1 lbs. . . . . . . . . . . 5/16" - 24 NF THREAD a: 2-1/4", b: 1-7/16", c: 11/32". 3880044 – Wt. 0.1 lbs. . . . . . . . . . . Wt. 0.1 lbs. 3/8" - 24 NF THREAD Thread Size Hole Dia. ITEM PRICE ITEM PRICE a: 2-1/2", b: 1-5/8", c: 7/16". 1/4" - 28 NF 1/4" 3870025 11.99 3870015 8.99 3880051 – Wt. 0.2 lbs. . . . . . . . . . . 5/16" - 24 NF 5/16" 3870026 12.99 3870016 9.99 1/2"- 20 NF THREAD 3/8" - 24 NF 3/8" 3870027 14.99 3870017 11.99 a: 3", b: 1-7/8", c: 9/16". 1/2" - 20 NF 1/2" 3870028 24.99 3870018 22.99 3880069 – Wt. 0.4 lbs. . . . . . . . . . . .

449 469 479 599

MANUAL OPERATED SELECTOR VALVES 2-POSITION, 3-WAY SELECTOR VALVES • Use to direct the incoming flow to either outlet port • Possible applications include individually controlling 2 unidirectional motors or 2 single acting cylinders with 1 control valve A

A) SELECTOR VALVE • Max. continuous pressure: 2,500 PSI • Max. continuous flow: 20 GPM • Ports: # 8 ORB 8107211 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . . .

7999

B) SELECTOR VALVES Max. Flow Max. Ports Wt. Model # (GPM) PSI (ORB) (lbs.) ITEM PRICE D3GF8A 9.5 3,625 8 1.9 8006793 54.99 D3GF10A 15 3,625 10 3.0 8006800 59.99 D3GF12A 25 3,625 12 4.5 8006819 69.99

2-POSITION, 6-WAY SELECTOR VALVES • Use to direct 2 incoming flows between 2 sets of outlet ports • Possible applications include individually controlling 2 double acting cylinders or hydraulic motors with one 4-way 3-position control valve

C) SELECTOR VALVE • Max. continuous pressure: 5,000 PSI • Max. continuous flow: 20 GPM • Ports: #8 ORB 8173932 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . .

D) SELECTOR VALVE • Max. continuous pressure: 2,500 PSI • Max. continuous flow: 40 GPM • Ports: #12 ORB 8107229 – Wt. 10.9 lbs. . . . . . . . . . . . . . . . .

9999

13999

2-POSITION, 6-WAY SELECTOR VALVE • Use to direct 2 incoming flows between 2 sets of outlet ports • Possible applications include operating 2 double acting cylinders or bi-directional motors with one 4-way, 3-position control valve • Max. continuous pressure: 4,350 PSI • Max. continuous flow: 16 GPM • DIN style electrical connector • #8 ORB ports 99 8051799 – Wt. 5.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

239

BALL VALVES

Body and ball are all steel construction. MEDIUM PRESSURE 2-WAY Max. continuous pressure: 3,000 PSI. A) 1/4" NPT PORTS 8163727 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . A) 3/8" NPT PORTS 8163735 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . A) 1/2" NPT PORTS 8163743 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . A) 3/4" NPT PORTS 8163750 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . A) 1" NPT PORTS 8163768 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . .

C A

1699 1799 1899 2399 3199

HIGH PRESSURE 2-WAY Max. continuous pressure: 7,250 PSI. B) #6 ORB PORTS 8046682 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . B) #8 ORB PORTS 8046690 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . .

2799 3199

HIGH PRESSURE 3-WAY Max. continuous pressure: 5,075 PSI. C) #8 ORB PORTS 8046724 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . .

6499

SOLENOID OPERATED VALVES

12 VDC SOLENOID OPERATED SELECTOR VALVES

HIGH PRESSURE NEEDLE VALVE • All steel construction • Use inline to limit flow within a hydraulic circuit • Max. continuous pressure: 5,000 PSI • #6 ORB ports 8051815 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

OPEN CENTRE HYDRAULIC SYSTEM PSI D GPM R mHP

DEFINITIONS Pounds per Square Inch Diameter (Inches) Gallons per Minute Radius Horse Power

BASIC FORMULAS 3.1416 π (Pi) 1/2 D of a circle R Area of a πR2 Circle

RESERVOIR Volume = of Reservoir

Height (in.) x Length (in.) x Width (in.) 231

CYLINDERS Extended Force (lbs.) = Piston Area x PSI Piston Area x Stroke x .26 Time to Extend/Retract a = Cylinder (sec.) GPM Force of a Cylinder

MOTORS GPM x 231 Displacement (in3/Rev.) PSI x Displacement (in3/Rev.) = 2π Torque (inch-pounds) x RPM Horse Power Output = 63,025 Motor Speed (RPM) Torque (inch-pounds)

PUMPS GPM x PSI 1714 x Pump Efficiency -.85 to .9 for Piston or Vane -.75 to .85 for Gear Displacement (in3/Rev.) x RPM = 231

HP to Drive a Pump = Pump Efficiency Pump Output (GPM)

SELECTOR VALVES

PROPORTIONAL FLOW DIVIDERS/COMBINERS • Proportional-type pressure compensated flow divider separates a single flow of hydraulic oil into 2 equal flows • Max. continuous pressure: 3,000 PSI

A) SPOOL STYLE • Combiner feature allows flow to be combined in reverse direction • Interlocking spools for equal control dividing or combining • Max inlet flow: 3 - 6 GPM • Ports: #8 ORB 99 8219628 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

B) ROTARY GEAR STYLE • Combiner feature allows flow to be combined in reverse direction • Efficient design resulting in very little pressure drop or heat generation • Built-in differential relief valves to synchronize cylinders and protect against excessive differential pressure • Can also be used as a pressure intensifier • Max inlet flow: 9 - 18 GPM • Ports: #10 ORB 99 8098212 – Wt. 10.0 lbs. . . . . . . . . . . . . .

249

PRESSURE COMPENSATED ADJUSTABLE FLOW CONTROLS • Flow can be completely shut off or wide open • Output flow is smooth and constant regardless of pressure changes on the controlled flow line • Both outlets are pressure compensated • Max. continuous pressure: 3,000 PSI

C) 16 GPM MAX. #10 ORB ports. 8154593 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . .

9999

C) 30 GPM MAX. #12 ORB ports. 8154601 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . . . .

9999

C • Similar to above except with built-in adjustable relief valve • Preset @ 1,500 PSI, adjustable from 750-3,000 PSI

D) 16 GPM MAX. #10 ORB ports. 8154619 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . .

11999

D) 30 GPM MAX. #12 ORB ports. 8154627– Wt. 8.4 lbs. . . . . . . . . . . . . . . . . .

11999

FLOW CONTROLS

ADJUSTABLE RELIEF VALVES • Relief valves are used to control the maximum pressure in the portion of the hydraulic system where they are installed • Protects components from over-pressuring • Use to set maximum operating pressure by setting relief pressure approx. 300 PSI over system pressure 2-port

3-port

RELIEF VALVES • 3 port, ball style • Preset @ 2,000 PSI and is adjustable from 150 to 3,500 PSI Ports Model # Max. (GPM) (ORB) CP20 5 6 CP40 10 8 CP80 20 10

Wt. (lbs.) 1.2 1.5 3.1

ITEM

PRICE

1240037 1240038 1240039

49.99 64.99 69.99

RELIEF VALVE • 3 port, differential poppet style • Provides smooth quiet performance and a small variation between cracking and full flow pressures • Preset at 2,000 PSI and adjustable from 1,500 to 3,000 PSI • Max. continuous flow: 30 GPM • Ports: #12 ORB 99 8107237 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RELIEF VALVE • 2-port, poppet style • Fast response, good stability and virtually leak free • Adjustable from 600 to 3,000 PSI and preset @ 1,500 PSI • Maximum relief flow: 10 GPM • Ports: #8 ORB 99 8219545 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

COUNTER BALANCE VALVE • Controls maximum return flow to equal pump output • Prevents load induced acceleration and pump cavitation • This valve is used in many load lowering applications to control the rate of descent ie. truck boxes, tilt bed trailers or cranes • Max. continuous pressure: 3,600 PSI • Relief pressure set @ 3,200 PSI, adjustable from 1,450 PSI to 3,625 PSI Max. Wt. Ports (ORB) (lbs.) ITEM PRICE GPM 8 8 2.9 1240065 79.99

PILOT OPERATED CHECK VALVE (LOCK VALVE)

• Require pressure from 1 work port to open the return line of the other work port • Holds the load in position, preventing creeping • Best used with motor spool to prevent the checks from not seating 2-WAY PILOT OPERATED CHECK VALVES Max. continuous pressure: 4,350 PSI. Max. Ports Model # GPM (ORB) VBD/F8 8.75 8 VBD/F10 12.5 10

Wt. (lbs.) ITEM PRICE 1.5 1240047 44.99 2.5 1240048 59.99

RELIEF VALVES

CROSS OVER RELIEF VALVES (CUSHION VALVES)

Eliminates shock, surge, and overload on hydraulic cylinders and motors. DIFFERENTIAL POPPET STYLE • Provides smooth quiet performance with a minimum variation between cracking and full flow pressures • Max. continuous pressure: 3,000 PSI • Max. continuous flow: 30 GPM • Reliefs are set at 2,000 PSI and adjustable from 1,500 to 3,000 PSI • Ports: #12 ORB 99 8107161 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . .

POPPET STYLE • Max. continuous pressure: 4,350 PSI • Relief cartridges are preset @ 2,000 PSI and are adjustable from 150 to 3,500 PSI Max. Ports Wt. GPM (ORB) (lbs.) ITEM PRICE CP/DI/L/40 10 8 2.6 1240044 99.99 CP/DI/L/80 20 10 4.9 1240045 119.99 Model #

HYDRAULICSFUNDAMENTALS OF SERVICE MANUAL

• Provides the fundamentals of theory and service of hydraulic components and systems • Colour illustrations 8092058 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999

ADJUSTABLE LINE THROTTLE VALVES These simple and versatile little valves are an inexpensive way to restrict the flow of oil to various components in a hydraulic system. They are adjustable from 0 GPM to their maximum rated capacity in one direction and capable of full flow in the other direction. Use to: • Control cylinder stroke speed • Prevent pump cavitation by controlling cylinders or motors with inertia loads • Meter the flow to a hydraulic motor to control speed

Max. continuous pressure: 5,000 PSI Max. Ports Wt. ITEM GPM (ORB) (lbs.) 3.5 4 1.0 8094856 15.0 6 1.1 8094864 19.0 8 2.3 8094872 44.0 12 2.3 8094880

LINE CHECK VALVES • Permits oil flow in 1 direction only • Poppet style for less leakage than standard ball type • Max. continuous pressure: 5,000 PSI Max. GPM

10.6 GPM 16.6 GPM 25.6 GPM

Ports (NPT) 3/8" 1/2" 3/4"

Wt. (lbs.) 0.7 1.2 1.8

ITEM

PRICE

8093049 8093056 8093064

11.99 13.99 17.99

PRICE 32.99 34.99 54.99 69.99

• Rubber covered with high tensile strength steel wire reinforcing • Temperature range -40° to 100°C (-40° to 212°F) • Wire braiding allows the hose to retain flexibility plus withstand high pressures and rough usage • Manufactured and tested to SAE 100 R1 and SAE 100 R2 specifications 1-WIRE SAE 100 R1 AT Max. Min. Size Cont. Bend Pressure Radius 1/4" 3,260 3.9" 3/8" 2,610 5.1" 1/2" 2,310 7.1" 3/4" 1,520 9.4" 1" 1,270 11.8" 2-WIRE SAE 100 R2 AT Max. Min. Size Cont. Bend Pressure Radius 1/4" 5,800 3.9" 3/8" 4,780 5.1" 1/2" 3,980 7.1" 5/8" 3,625 7.9" 3/4" 3,110 9.4" 1" 2,390 11.8"

Wt. PRICE (lbs.) ITEM (ft.) 0.2 0.2 0.2 0.2 0.2

8002645 8002647 8002648 8002649 8002650

Wt. (lbs.) ITEM 0.1 0.1 0.1 0.5 0.1 0.1

8002651 8002652 8002654 8070179 8002655 8002656

1.29 1.49 1.69 2.59 3.59

PRICE (ft.) 1.69 1.89 1.99 2.49 3.39 4.99

HIGH FLEX 2-WIRE SAE 100 R2 AT • Increased flexibility for a smaller bend radius • High visibility yellow lay line Size 3/8" 1/2"

Max. Min. Wt. Cont. Bend (lbs.) ITEM Pressure Radius 4,780 3,980

2.8" 3.2"

0.4 8070211 2.4 8070237

PRICE (ft.)

HYDRAULIC VALVES

HYDRAULIC HOSE CENTRE

1.99 2.19

HOSE CRIMP DIAMETERS COMPRESSION STYLE BITE-TO-WIRE STYLE 2-Wire Hose Size 1-Wire 2-Wire 1-Wire 0.695" 1/4" 0.610" 0.653" 0.656" 0.874" 3/8" 0.748" 0.810" 0.835" 0.995" 1/2" 0.905" 0.930" 0.955" — — 5/8" – 1.050" 1.295" 3/4" 1.100" 1.160" 1.256" — — 1" 1.410" 1.470"

SUCTION HOSE • Use to connect your hydraulic pump to your reservoir • Can also be used for other petroleum based applications • Resistant to vacuum induced collapse which can result in pump cavitation • 2 styles available • The hose cover is made of abrasion and weather resistant neoprene rubber • Reinforced with 4 spirals of high-tensile yarn • Temperature range: -40°C to 95°C (-45°F to 203° F) • Not to be used for suctioning applications over 6 ft. • Max. continuous pressure: 250 PSI Hose I.D. 3/4" 1"

Hose. Max. Flow O.D. (GPM) 1.16" 7 1.44" 12

Wt. (lbs.) ITEM PRICE 0.2 8017996 2.99/ft. 0.5 8018030 3.99/ft.

• The hose cover is a neoprene rubber with a black wrapped finish that is abrasion and weather resistant • Reinforced with a heavy wire helix embedded between layers of synthetic textile cords • Temperature range: -40°C to 110°C (-40°F to 230°F) • Max. continuous pressure: 150 PSI Hose Hose Max. Flow Wt. I.D. O.D. (GPM) (lbs.) ITEM PRICE 1-1/4" 1.5" 22 0.6 8150823 6.99/ft. 1-1/2" 1.97" 27 3.8 8017987 7.99/ft.

WE ARE PROUD TO OFFER

FREE* HOSE CUTTING, CRIMPING and CLEANING Fitting Types Rigid Swivel 45° & 90° Thread Styles NPT, ORB, JIC 37°, ORFS & Metric

We offer 17 sizes and types of hydraulic hose and over 420 different crimp on fittings and adapters.

*For all hydraulic hose and fittings purchased from Princess Auto.

HYDRAULIC HOSE

READY-MADE HYDRAULIC HOSE

Princess Auto also offers hydraulic hose crimping with a wide variety of fittings for many applications.

• We carry many sizes of complete hoses assemblies for your convenience • If we don't have what you require, let us know and we will custom make exactly what you need • All hose is 2-wire 1/4" NPT RIGID FITTINGS x 1/4" HOSE 5,000 PSI Length Wt. (lbs.) ITEM PRICE 2 ft. 0.7 1290287 7.99 3 ft. 0.9 1290295 8.99 4 ft. 1.2 1290303 10.99 6 ft. 1.6 1290329 13.99 8 ft. 2.1 1290345 16.99

1/2" NPT RIGID FITTINGS x 1/2" HOSE Length Wt. (lbs.) ITEM 2 ft. 1.3 1290840 3 ft. 1.7 1290857 4 ft. 2.2 1290865 6 ft. 2.8 1290881 8 ft. 3.8 1290907 10 ft. 4.3 1290923

3,500 PSI PRICE 10.99 12.99 14.99 18.99 22.99 26.99

3/8" NPT RIGID FITTINGS x 3/8" HOSE 4,000 PSI 1/2" JIC SWIVEL FITTINGS x 1/2" HOSE 3,500 PSI Length Wt. (lbs.) ITEM PRICE Length Wt. (lbs.) ITEM PRICE 2 ft. 1.3 8007250 14.99 2 ft. 1.0 1290568 8.49 3 ft. 1.7 8007251 15.99 3 ft. 1.3 1290576 9.99 4 ft. 2.1 8007252 17.99 4 ft. 1.6 1290584 11.99 6 ft. 2.8 8007259 22.99 6 ft. 2.3 1290600 14.99 8 ft. 3.5 8007260 26.99 8 ft. 3.0 1290626 17.99

T-BOLT HOSE CLAMPS

Range (I.D.) Wt. (lbs.) 1.14" - 1.22" 0.1 1.31" - 1.56" 0.1 1.56" - 1.81" 0.1 1.81" - 2.06" 0.1 2.06" - 2.31" 0.1 2.31" - 2.63" 0.1 2.56" - 2.87" 0.2 2.69" - 3.00" 0.2 3.06" - 3.38" 0.2 3.31" - 3.62" 0.2 3.63" - 3.94" 0.2

• Stainless steel band and bridge, plated steel bolt, trunnion and nut • Provides dynamic sealing to suction hoses preventing air and other contaminants from entering the system • Prevents the leakage of fluid from pressure hoses • Improved sealing compared to standard screw clamps

STEEL HOSE BARBS

Steel construction to prevent oil contamination and provide superior fitting strength.

Hose I.D. 3/4" 1" 1-1/4" 1-1/2" 1/2" 3/4" 3/4"

Fitting Size 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT #8 ORBM #10 ORBM #12 ORBM

Wt. (lbs.) 0.3 0.5 0.9 1.1 0.1 0.2 0.3

ITEM PRICE 8023925 3.99 8016951 3.99 8016997 3.99 8017004 4.49 8017013 4.49 8186918 4.49 8017040 4.49 8186926 4.99 8106288 4.99 8106312 5.49 8186934 5.49 ITEM PRICE 8023952 3.99 8023961 7.99 8023989 17.99 8023998 24.99 8220626 3.99 8220634 8.99 8220642 9.99

ONGOING COMMITMENT TO TRAINING PAL Hydraulics Training Schools are commited to Princess Auto’s philosophy of creating a result oriented team environment which is challenging and rewarding, where people are encouraged to excel and reach their individual potential.

PAL Hydraulics offers a four tier training program that is available to our hydraulic team members. The courses include Hydraulic Specialist 1, 2, 3 and Mobile Hydraulic Technician (MHT). The MHT certification is an industry recognized course offered through the Fluid Power Society.

PAL Hydraulics Powered by Our Graduates

• Use to cap or plug hydraulic hose ends or components to prevent contaminant ingression • Made from low density polyethylene

CAPS

PLUGS

25 per package.

25 per package. Size 1/4" 3/8" 1/2" 3/4" 1"

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1

ITEM 8077828 8077901 8077950 8077984 8078016

Size 1/8" 1/4" 3/8" 1/2" 3/4" 1"

PRICE 3.19 3.59 4.09 5.29 6.69

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1

ITEM 8077828 8077877 8077927 8077976 8078008 8078032

PRICE 3.19 3.49 3.99 4.59 6.19 7.19

HYDRAULIC HOSE

HOSE CONTROL & PROTECTION

HOSE MOUNTING CLAMPS • Use to secure and organize hydraulic hose • Mount by either welding or drilling a hole through the base plate and bolting down A) SINGLE CLAMP Hose I.D. Hose O.D. Wt. (lbs.) 1/4" 0.62" 0.2 3/8" 0.78" 0.3 1/2" 0.91" 0.3 3/4" 1.19" 0.3 1" 1.53" 0.4

ITEM PRICE 8076101 3.99 8076135 3.99 8076143 3.99 8076150 4.49 8076168 5.99

A B B) TWIN CLAMP Hose I.D.Hose O.D. Wt. (lbs.) 1/4" 0.62" 0.3 3/8" 0.78" 0.4 1/2" 0.91" 0.4 3/4" 1.19" 0.5

ITEM PRICE 8076176 4.99 8076184 5.99 8076200 6.49 8076226 6.99

SPIRAL HOSE WRAP

• Wraps around hydraulic and pneumatic hoses, cables, ropes and wires to provide protection and prevent premature failures • Protects against cuts, abrasion, crushing, ultraviolet light and other hazards that can destroy regular hoses and cables • Made from high density UV resistant polyethylene • Temperature resistance from -73°C (-100°F) to 104°C (220°F)

HYDRAULIC HOSE CRIMP FITTINGS

ITEM Inside Dia. Length Wt. (lbs.) PRICE 1/2" 25 ft. 0.7 8080822 29.99 5/8" 25 ft. 1.1 8078040 29.99 3/4" 25 ft. 1.6 8080830 39.99 1" 20 ft. 1.7 8078065 39.99 10 ft. 1.9 8078073 1-5/8" 39.99 5 ft. 1.6 8078081 2-1/2" 44.99 Manufactured and tested to SAE 100 R1 and SAE 100 R2 specifications.

BITE-TO-WIRE STYLE FITTINGS All sizes feature a precision machined ferrule, which when crimped “bites" into the wire of the hose. Field proven in vibration and shock conditions and designed to handle sub zero through high temperatures applications. (Crimp dimensions on page 27.)

JIC 37° FITTINGS Hose I.D. 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

End Size 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4"

Wt. (lbs.) 0.1 0.1 0.2 0.3 0.3 0.3 0.5

FEMALE SWIVEL ITEM PRICE 8133738 4.79 8133746 4.79 8133753 5.29 8133761 5.99 8133779 7.39 8133787 8.49 8133795 11.99

FEMALE 90° SWIVEL Wt. (lbs.) ITEM PRICE – – – – – – 0.2 8217671 11.99 – – – 0.3 8217705 13.99 – – – – – –

HYDRAULIC HOSE FITTINGS

BITE-TO-WIRE STYLE FITTINGS

Wt. 0.1 lbs.

NPT MALE

Hose I.D. 1/4" 3/8" 1/2"

Wt. 0.1 lbs.

Hose I.D. 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

End Size 1/4" 3/8" 3/8" 1/2" 3/8" 1/2" 3/4"

NPT MALE SWIVEL

ITEM 8133647 8133670 8133688 8133696 8133704 8133712 8133720

PRICE 3.99 4.19 4.19 4.89 4.89 4.99 8.99

End Size 1/4" 3/8" 1/2"

ITEM 8217713 8217721 8217739

PRICE 6.99 7.29 8.49

O-RING FACE SEAL FEMALE SWIVEL Wt. 0.1 lbs.

Hose I.D. End Size 1/4" #4 3/8" #6 1/2" #8 5/8" #10 3/4" #12

ITEM 8220170 8220162 8220154 8220139 8220121

PRICE 7.39 8.39 9.49 11.99 13.99

COMPRESSION STYLE FITTINGS All sizes feature a precision machined ferrule which when crimped compresses against the hose. Field proven in vibration and shock conditions and designed to handle sub-zero through high temperature applications.

NPT FITTINGS

Hose I.D. 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 1"

RIGID MALE SWIVEL MALE 90° SWIVEL MALE End Size Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE 1/8" 0.1 – – – – – – 1290240 3.99 1/4" 0.1 0.2 0.2 1290241 3.99 1290255 6.99 8077109 12.69 3/8" 0.1 0.2 – – – 1290242 4.19 1290256 7.29 1/2" 0.2 – – – – – – 1290243 9.99 1/4" 0.2 – – – – – – 1290244 4.19 3/8" 0.2 0.2 0.3 1290245 4.19 1290257 7.29 8077117 13.69 1/2" 0.2 0.3 – – – 1290247 4.89 1290258 8.49 3/8" 0.2 0.3 – – – 1290248 4.89 8050502 8.49 1/2" 0.3 0.3 0.5 1290249 4.99 1290259 8.49 8077125 13.69 1/2" 0.4 – – – – – – 8076978 8.99 3/4" 0.4 – – – – – – 8076986 8.99 3/4" 0.4 0.5 – – – 1290251 8.99 1290260 13.49 1" 0.7 1.0 – – – 1290252 13.49 1290262 21.99

HOSE MENDERS

Hose I.D. 1/4" 3/8" 1/2" 3/4" 1"

End Size 1/4" 3/8" 1/2" 3/4" 1"

RIGID FEMALE Wt. ITEM PRICE (lbs.) 0.1 1290266 4.29 0.2 1290267 4.99 0.3 1290268 6.29 0.3 8006624 11.99 – – –

SWIVEL FEMALE Wt. ITEM PRICE (lbs.) 0.1 1290263 4.99 0.2 1290264 6.19 0.3 1290265 7.19 0.5 8006627 15.49 0.7 8187569 19.99

Hose Wt. I.D. (lbs.) 3/8" 0.2 1/2" 0.4

ITEM

PRICE

8077133 8077141

10.49 10.99

O-RING BOSS MALE FITTINGS

Hose End I.D. Size Wt. (lbs.) 1/4" #6 0.1 3/8" #6 0.2 3/8" #8 0.2 1/2" #8 0.3 1/2" #10 0.3 5/8" #10 0.4 3/4" #12 0.4

RIGID SWIVEL 90° SWIVEL ITEM PRICE Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE – – – 0.3 1290270 4.99 1290365 13.69 0.2 0.3 1290272 4.99 1290281 8.39 1290366 13.99 0.3 0.4 1290273 5.99 1290282 9.49 1290367 14.69 0.4 0.5 1290274 6.59 1290283 9.99 1290358 14.99 0.3 0.5 1290275 7.19 1290284 10.49 1290359 15.99 – – – – – – 8077018 13.99 – – – – – – 1290361 14.49

Hose I.D.

End Size

1/4" 3/8" 1/2" 5/8" 3/4"

#4 #6 #8 #10 #12

Wt. (lbs.) – 0.2 0.2 0.4 –

RIGID MALE ITEM – 8046624 8046633 8077026 –

PRICE – 6.49 7.99 11.99 –

SWIVEL FEMALE Wt. (lbs.) ITEM PRICE 0.1 8046642 7.39 0.2 8046651 8.39 0.3 8046660 9.49 0.4 8077034 11.99 0.5 8046679 13.99

JIC 37° FITTINGS Hose I.D. End Size 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 3/4" 3/4" 1"

1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 3/4" 1" 1"

Wt. (lbs.) 0.3 0.1 0.2 0.2 0.2 0.3 0.4 – 0.4 0.4 0.4 0.5 0.6

RIGID MALE ITEM PRICE 1290285 3.99 1290362 4.79 1290288 4.99 1290289 5.29 1290290 6.29 1290291 7.29 1290371 8.99 – – 8077042 9.99 8077059 9.99 1290292 9.99 8109761 10.99 1290293 12.99

Wt. (lbs.) 0.1 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.4 0.5 0.5 0.6 0.7

SWIVEL FEMALE ITEM PRICE 1290294 4.79 1290297 4.79 1290298 5.29 1290299 5.99 1290300 7.39 1290301 8.49 1290369 10.79 8077067 9.99 8077075 11.59 8077083 11.99 1290302 11.99 1290304 13.99 1290305 13.99

HYDRAULIC HOSE FITTINGS

O-RING FACE SEAL FITTINGS

JIC 37° FEMALE ELBOWS Hose I.D. 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1"

90° SWIVEL 45° SWIVEL 90° LONG SWIVEL End Size Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE 1/4" 0.1 – – – – – – 1290307 10.99 3/8" 0.2 – – – – – – 1290308 11.49 3/8" 0.2 0.2 0.2 1290309 11.99 1290318 12.49 1290325 12.49 1/2" 0.3 – – – – – – 1290310 12.99 1/2" 0.3 0.3 0.4 1290312 13.99 1290320 13.49 1290326 14.49 5/8" 0.5 0.4 – – – 1290313 14.99 1290321 14.99 5/8" 0.5 – – – – – – 8077091 18.99 3/4" 0.7 0.6 0.8 1290314 19.99 1290322 19.99 1290327 19.99 – – – – – – 1" 1.1 1290315 19.99

REPLACEMENT O-RINGS Pkg. of 10. O-RING BOSS Size Wt. (lbs.) #4 0.1 #5 0.2 #6 0.1 #8 0.1 #10 0.1 #12 0.1 #14 0.1 #16 0.1 #20 0.1

ITEM 8078891 8078974 8078990 8079014 8079048 8079063 8079071 8079089 8079097

PRICE 3.59 3.69 3.79 4.79 4.89 5.99 7.89 7.99 9.99

O-RING FACE SEAL – Wt. 0.1 lbs. Size ITEM #4 8079105 #6 8079113 #8 8079121 #10 8079147 #12 8079154

PRICE 5.49 5.99 7.49 7.99 9.49

125 PC O-RING BOSS REPLACEMENT O-RING KIT 8080913 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

1499

PRESSURE WASHER CRIMP FITTINGS SWIVEL FEMALE Hose I.D. 1/4" 3/8"

End size 22 mm 22 mm

ITEM 8190746 8190753

PRICE 4.99 9.99

NO CRIMP HOSE FITTINGS

B) FIXED A) SWIVEL (MALE (FEMALE NPT) JIC)

HYDRAULIC HOSE FITTINGS

Designed for in-field installation. For 1-Wire Thin Cover (up to 3,000 PSI) Hose I.D. End Size Wt. ITEM PRICE 1/4" 1/4" 0.2 1294891 6.99 3/8" 3/8" 0.3 1294909 7.49 1/2" 1/2" 0.4 1294917 9.99 1/4" 1/4" 0.2 1291442 6.99 3/8" 3/8" 0.3 1291509 7.49 1/2" 1/2" 0.4 1291517 9.99

For 2-Wire Thin Cover (up to 5,000 PSI) Wt. ITEM PRICE 0.4 1294941 6.99 0.3 1294958 7.49 0.4 1294966 9.99 0.2 1291541 6.99 0.3 1291558 7.49 0.4 1291574 9.99

HYDRAULIC FITTINGS PAL Hydraulics offers a variety of sizes and styles of hydraulic fittings to complete your installation or project. Size range: 1/8" to 2". Five Types of Fittings: NPT (National Pipe Thread) – Tapered thread, sealant is required for a good seal. ORB (O-Ring Boss) – O-ring seals against a machined seat in port. JIC (37° Flare) – Flare seats against opposite flare in port. ORFS (O-Ring Face Seal) – O-ring seals by compression between machine groove and fitting face. METRIC – Straight thread, bonded seal required if attached to a port.

NPT BASIC FITTINGS

Thread Size 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT

TEE ITEM PRICE – – 8058727 5.99 8058736 7.49 8058745 11.49 1290066 15.99

TEE ITEM PRICE 8092512 1.99 8058754 4.99 1293018 5.99 1293026 8.99 8058763 14.99

TEE ITEM PRICE – – 8058692 4.99 8058709 6.99 8058718 9.99 8058488 14.99

90° ELBOW ITEM PRICE 8092496 1.99 1292788 3.99 1292796 4.99 1292804 6.99 1292812 11.99

90° ELBOW ITEM PRICE – – 8058549 3.99 8058567 4.99 8058647 6.99 8058656 9.99

Thread Size 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT

NIPPLE ITEM PRICE 8092439 0.89 8058102 1.49 1291715 1.99 8058111 2.49 8059101 3.19 8092546 3.99

COUPLER ITEM PRICE 8092447 0.99 8058219 2.49 8058237 2.99 8058308 3.99 1292770 5.49 – –

PLUG ITEM PRICE – – 8059058 1.29 8059067 1.49 1291624 1.99 1291632 2.99 – –

COUNTER SUNK PLUG ITEM PRICE – – – – 8133407 1.49 8133464 1.99 8133506 2.99 – –

90° ELBOW ITEM PRICE 8092462 1.99 8059110 3.99 8059129 4.99 1291806 5.99 1291822 8.99 – –

NPT BASIC SWIVEL FITTINGS

Thread Size 1/8" 1/4" 3/8" 1/2" 3/4" 1"

COUPLER ITEM PRICE 1291871 1.99 1291889 2.19 1291913 2.79 1291947 3.99 1291962 5.49 1291970 8.99

COUPLER ITEM PRICE – – 1292036 2.69 1292044 3.19 1292077 3.99 8058530 5.99 – –

90° ELBOW ITEM PRICE 1290062 3.19 1292101 3.79 8058120 5.49 1292150 5.99 1292184 9.99 1292192 15.99

MALE x FEMALE BUSHING Thread Size ITEM PRICE 3/8" x 1/4" 1294727 1.49 3/8" x 1/8" 8058843 1.69 1/2" x 1/4" 1294735 1.89 1/2" x 3/8" 1294743 1.99 3/4" x 3/8" 1294750 2.89 3/4" x 1/2" 8058317 3.79 1" x 1/2" 8058852 4.29 1" x 3/4" 1294776 4.49 1-1/4" x 3/4" 8106221 5.99 1-1/4" x 1" 8092538 5.99 1-1/2" x 3/4" 8109753 9.99 90° ELBOW 45° ELBOW TEE Thread 1-1/2" x 1-1/4" 8092520 9.99 Size ITEM PRICE ITEM PRICE ITEM PRICE 2" x 1-1/2" 8092991 15.99 1/4" NPT – – 1292218 4.99 8059156 7.49 3/8" NPT – – 1292226 5.49 1293166 8.49 1/2" NPT 8058772 6.49 1292242 6.49 1293174 9.99

NIPPLE COUPLER (F x M) REDUCER Thread Size ITEM PRICE ITEM PRICE ITEM PRICE 1/8" x 1/4" – – – – 1291830 2.49 1/4" x 1/8" 8059076 1.79 8058665 3.89 8092454 2.49 3/8" x 1/4" 8059085 1.99 8058683 3.99 1291863 3.69 1/2" x 3/8" 1291723 2.39 1292747 5.49 1292002 4.69 3/4" x 1/2" 8059094 3.69 1292762 6.99 1292028 6.49 1" x 3/4" – – – – 8057979 9.99

NPT SWIVEL SIZE ADAPTERS MALE x FEMALE Thread Size 1/8" x 1/4" 1/4" x 3/8" 3/8" x 1/4" 3/8" x 1/2" 1/2" x 3/8" 1/2" x 3/4" 3/4" x 1/2"

COUPLER ITEM PRICE 1294099 2.49 1291897 2.79 8058503 2.99 8058521 3.99 1291939 4.49 1291954 5.49 1294107 6.49

O-RING BOSS BASIC FITTINGS

90° ELBOW ITEM PRICE – – 1292119 4.99 1290065 4.99 8059138 5.99 1292143 5.99 1292168 9.99 1292176 9.99

NPT LIVE SWIVELS • These fittings will swivel a full 360° even when under pressure • Max. continuous pressure: 3,000 PSI • Temp. range: -35°C to 120°C (-31°F to 248°F)

Thread Size 3/8" 1/2" 3/4"

COUPLER ITEM PRICE 8224370 59.99 8224396 64.99 8224404 69.99

90° ELBOW ITEM PRICE 8224412 69.99 8224420 74.99 8224438 79.99

Thread Size 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

COUPLER

PLUG Thread Size #4 #5 #6 #8 #10 #12

ITEM PRICE ITEM PRICE 8059165 8059174 1291491 8058095 8059049 1291319

1.59 1.79 1.99 2.19 2.79 3.89

– – – 8145187 8145195 –

– – – 4.49 4.99 –

O-RING BOSS SIZE ADAPTERS

MALE x FEMALE Thread Size #6 x #4 #6 x #8 #8 x #10 #10 x #8 #12 x #8 #12 x #10 #16 x #12 #20 x #16

ITEM 8058861 8017861 8017870 8058870 8058889 8058898 8058905 8058914

PRICE 3.99 7.99 7.99 7.99 7.99 8.99 9.99 15.99

JIC 37° BASIC SWIVEL FITTING

JIC 37° BASIC FITTINGS PLUG Thread Size ITEM PRICE 1/4" 8059183 1.29 5/16" 8059192 1.89 3/8" 1293612 1.99 1/2" 1293653 2.19 5/8" 8059209 2.49 3/4" 1293778 2.99 1" 1293836 4.49

90° ELBOW 90° ELBOW (M x F) ITEM PRICE ITEM PRICE – – 8098196 3.49 – – – – – – 1291772 4.69 – – 1291798 5.79 – – 1291814 8.49 – – – –

HYDRAULIC HOSE FITTINGS

NPT SIZE ADAPTERS

CAP ITEM PRICE 1293844 1.29 1293851 1.39 1293869 1.49 1293877 1.59 1293885 2.19 1293893 2.49 1293901 4.49

COUPLER ITEM PRICE 8098204 1.49 1293927 1.69 1293935 1.79 1293943 2.49 1293968 2.79 1293976 3.79 – –

90° ELBOW BULKHEAD ITEM PRICE ITEM PRICE – – 8217374 3.29 – – 8217416 4.29 8217424 4.79 8088411 3.99 8217432 5.49 8088569 4.99 8217457 6.99 8088585 5.99 – – 8217465 8.29

TEE ITEM PRICE – – – – 8088510 3.99 8088528 4.99 8088536 5.49 – –

Thread Size 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

90° ELBOW ITEM PRICE 8217473 3.49 8217481 4.49 8217499 5.29 8217507 5.69 8217515 7.29 8217523 9.29 COUPLER 8217531 2.99 – – 8217549 3.29 8217598 4.29 8217606 5.29 8217614 7.29

(2MxF) TEE 1/4" – – 5/16" – – 3/8" 8217630 3.99 1/2" 8217655 4.99 5/8" – – 3/4" – –

HYDRAULIC HOSE FITTINGS

JIC 37º SIZE ADAPTERS

JIC 37° SIZING CHART

NIPPLE Thread Wt. Size (lbs.) ITEM PRICE 3/8" x 1/2" 0.1 8088452 2.99 1/2" x 5/8" 0.2 8088494 3.49 * Max. pressure: 800 PSI

COUPLER Thread Wt. Size Thread dia. Threads/In. (F x M) (lbs.) ITEM PRICE 7/16" 20 3/8" x 1/2" 0.1 8120032 3.59 9/16" 18 1/2" x 5/8" 0.2 8120206 3.99 3/4" 16 5/8" x 3/4" 0.2 8120214 6.29 7/8" 14 1/2" x 3/8" 0.2 8120263 2.49 1-1/16" 12 5/8" x 1/2" 0.2 8120289 2.99 1-5/16" 12 3/4" x 5/8" 0.2 8120297 3.99

JIC 1/4" 3/8" 1/2" 5/8" 3/4" 1"

THREAD TYPE ADAPTERS CYLINDER PORT CONVERTERS

MALE x FEMALE Thread Size (ORB x NPT) #6 x 1/4" #6 x 3/8" #8 x 3/8" #8 x 1/2" #10 x 1/2" #10 x 3/4" #12 x 1/2"

ITEM

PRICE

8059021 1290347 1290348 1290349 1290350 8059030 1290353

2.69 2.99 3.69 3.99 4.99 5.99 6.99

JIC 37° x NPT ADAPTERS

O-RING BOSS x NPT ADAPTERS

Thread Size (ORB x NPT) #6 x 1/4" #6 x 3/8" #6 x 1/2" #8 x 3/8" 1293323 #10 x 1/2" #12 x 3/4" #16 x 1" #20 x 1-1/4"

MALE x MALE ITEM PRICE 1293299 3.49 8058781 3.49 – – 1293315 3.99 1293323 3.99 1293331 4.99 1293513 6.99 8059012 7.99 1290227 11.99

FEMALE x MALE ITEM PRICE 8017692 6.99 8017745 6.99 8017754 6.99 8017763 7.99 8017772 7.99 8017781 7.99 8017807 9.99 – – – –

JIC 37° x METRIC ADAPTERS 90° ELBOW Thread Size (JIC 37° x NPT) ITEM PRICE 1/4" x 1/4" 1294990 2.99 5/16" x 1/4" – – 3/8" x 1/4" 8032345 3.99 3/8" x 3/8" 1295013 3.99 3/8" x 1/2" 8058834 4.99 1/2" x 3/8" 8163404 4.99 1/2" x 1/2" 1295021 4.99 5/8" x 1/2" 1295039 5.99 3/4" x 3/4" 1295054 7.99 1" x 1" – –

COUPLER ITEM PRICE 1293422 1.69 1293430 1.99 8088544 2.19 1293448 2.19 1294024 2.49 8163396 2.49 1293455 2.99 8058807 3.49 1293489 3.99 8058816 5.49

Thread Size (JIC 37°x Metric) 1/4" x 12 mm 3/8" x 14 mm 3/8" x 16 mm 3/8" x 18 mm 1/2" x 18 mm 5/8" x 20 mm 1/2" x 22 mm

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.2 0.1

ITEM

PRICE

8120610 8120628 8120636 8120644 8120651 8120669 8120677

3.49 3.99 4.49 4.99 4.99 5.49 5.99

JIC 37° x O-RING BOSS ADAPTERS A

Thread Size (JIC 37° x ORB) 1/4" x #4 1/4" x #6 3/8" x #4 3/8" x #6 3/8" x #8 3/8" x #10 1/2" x #6 1/2" x #8 1/2" x #10 1/2" x #12 5/8" x #8 5/8" x #10 5/8" x #12 3/4" x #12

A) COUPLER ITEM PRICE 1294792 1.49 8163362 1.49 8163354 1.49 1294800 1.49 8006363 1.69 8006366 2.99 8006362 1.89 1294818 1.99 8045340 2.99 8006367 3.99 8088445 4.79 1294826 4.79 8006368 4.99 1294834 4.99

B) 90° ELBOW C) LONG ELBOW ITEM PRICE ITEM PRICE – – – – – – 8163388 3.99 – – 8163370 3.99 1294859 4.89 8000727 8.99 – – 8088353 4.89 – – – – – – 8006378 4.99 1294867 5.99 8000704 11.99 – – 8006370 6.49 – – – – – – – – 1294875 8.49 8000702 12.99 – – – – – – – –

NPT x JIC 37° SWIVEL ADAPTERS

O-RING BOSS x JIC 37° SWIVEL ADAPTERS MALE x FEMALE Thread Size (ORB x JIC) #4 x 1/4" #6 x 3/8" #8 x 1/2" #10 x 5/8" #12 x 3/4"

ITEM

PRICE

1290016 1290017 1290019 1290020 1290021

4.99 4.99 5.49 5.99 6.99

Thread Threads ORB dia. Fitting /In. #4 #5 #6 #8 #10 #12 #14 #16 #20

MALE x FEMALE Thread Size (NPT x JIC) ITEM PRICE 1/4" x 1/4" 8058335 3.99 1/4" x 3/8" 8058344 4.99 3/8" x 3/8" 8058380 4.99 3/8" x 1/2" 8058399 5.99 1/2" x 1/2" 8058406 6.99 1/2" x 5/8" 8058442 7.99 1/2" x 3/4" 1290031 8.99 3/4" x 3/4" 8058460 9.99

O-RING BOSS x NPT SWIVEL ADAPTERS

7/16" 1/4" 1/2" 5/16" 9/16" 3/8" 3/4" 1/2" 7/8" 5/8" 1-1/16" 3/4" 1-3/16" 7/8" 1-5/16" 1" 1-5/8" 1-1/4"

20 20 18 16 14 12 12 12 12

TEFLON TAPE

MALE x FEMALE COUPLER 45° ELBOW 90° ELBOW Thread Size (ORB x NPT) ITEM PRICE ITEM PRICE ITEM PRICE – – #4 x 1/4" 1292291 2.99 – – – – #5 x 1/4" 8059218 3.49 – – – – #6 x 1/4" 1292309 3.49 8032791 6.99 – – #6 x 3/8" 1292317 3.99 8058139 6.99 – – #6 x 1/2" 8001420 4.99 8001418 8.99 – – #8 x 1/4" 8058996 4.99 – – – – #8 x 3/8" 1292325 4.99 1292424 8.99 #8 x 1/2" 1292333 3.89 8192064 4.99 1292432 8.99 – – #10 x 3/8" 1292341 4.99 8059147 9.49 #10 x 1/2" 1290006 4.99 8192072 5.49 1292457 9.99 – – #10 x 3/4" 1292358 6.99 – – – – #12 x 1/2" 8220188 7.49 8220196 10.99 – – #12 x 3/4" 1294412 7.49 8000705 11.99 – – #16 x 1" 1295310 9.99 8059003 14.99

HYDRAULIC HOSE FITTINGS

O-RING BOSS SIZING CHART

SWIVEL THREAD TYPE ADAPTERS

• Seals all threaded valve and pipe joints • Withstands pressures up to 10,000 PSI Thread Size ITEM PRICE 1/2" x 16 ft. 1250086 0.19 1/2" x 40 ft. 1250620 0.49 3/4" x 32 ft. 1250087 0.49 1" x 65 ft. 1250088 0.99 10 pk. 99 1253285 – Wt. 0.2 lbs. . . .

FLAT FACE HYDRAULIC QUICK COUPLERS

QUICK COUPLERS QUICK COUPLER DUST CAPS & PLUGS

A B Dust cap for Dust plug for coupler tip coupler body STANDARD STYLE Size ITEM PRICE 8029395 1.99 A 1/4" 8029493 1.99 A 3/8" A 1/2" 8029545 1.99 8029607 1.99 B 1/4" 8029616 1.99 B 3/8" B 1/2" 8029634 1.99 FLAT FACE STYLE Size ITEM PRICE 8029581 1.99 A 1/2" 8029652 1.99 B 1/2"

• Used extensively in skid steer loader market • Less pressure drop through coupler assembly • Flat face design for minimal spillage during connection and disconnection • Female body does not have recessed cavity. Dirt, debris and oil do not get trapped • All steel parts are zinc plated and yellow bichromated • Working pressure: -25° to 125°C (-13° to 257°F) Size C C D D

1/2" plug 3/4" plug 1/2" body 3/4" body

Max. Pressure GPM @ (PSI) 15 PSI (ΔP) 4,000 9.0 3,500 14.0 4,000 9.0 3,500 14.0

Wt. (lbs.) 0.3 0.6 0.6 1.0

ITEM PRICE 1290088 1290086 1290087 1290085

15.99 26.99 34.99 54.99

QUICK COUPLERS

QUICK COUPLERS A

A) PIONEER QUICK COUPLERS • Connects and disconnects quickly creating a positive seal • Max. pressure: 3,000 PSI Wt. Size Max. Flow (lbs.) ITEM PRICE 1/4" 3 GPM 0.4 8003325 16.99 3/8" 6 GPM 0.7 8003332 17.99 1/2" 12 GPM 0.8 8003336 18.99

E) PIONEER 1-HAND QUICK COUPLER • Push to connect, pull to separate (under pressure conditions) • 1/2" NPT male and female • Max. pressure: 3,000 PSI, max. flow: 12 GPM 99 8003337 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F) PIONEER FEMALE x JOHN DEERE MALE ADAPTER Adapts 1/2" Pioneer male to 1/2" John Deere female. 8003528 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

G) REPLACEMENT SEALS FOR 1/2" COUPLER BODIES Nitrile composition. 8003339 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

669

B) PIONEER MALE TIPS ONLY For use with quick couplings. H Max. Wt. Size Flow (lbs.) ITEM PRICE 1/4" 3 GPM 0.1 8003296 5.99 DNP QUICK COUPLERS 3/8" 6 GPM 0.2 8003299 6.49 • All parts are zinc plated and I 1/2" 12 GPM 0.2 8003300 6.99 yellow bichromated • Interchangeable with Pioneer C) JOHN DEERE MALE TIP • Working temp.: -25°C to 125°C (-13°F to 257°F) • Fits John Deere sleeve type Pressure GPM @ Wt. female bodies Size Max.(PSI) 15 PSI (ΔP) (lbs.) ITEM PRICE • #12 ORB female threading 99 1/4" plug 3,500 2.0 0.1 1290075 5.49 8058133 – Wt. 1.2 lbs. . . . . . . . . . 3/8" plug 3,500 7.0 0.2 1290077 5.99 D) DOUBLE BREAKAWAY CLAMP H 1/2" plug 3,000 11.0 0.2 1290079 6.49 • For 1/2" or 3/4" quick couplings 3/4" plug 2,500 20.0 0.5 1290208 11.99 • Prevents hose breakage by 1/4" body 3,500 2.0 0.3 1290076 9.99 automatically uncoupling lines 3/8" body 3,500 7.0 0.5 1290078 12.99 when implement is disconnected I accidentally 1/2" body 3,000 11.0 0.6 1290080 13.99 99 1293224 – Wt. 0.8 lbs. . . . . . . 3/4" body 2,500 20.0 1.1 1290207 25.99

WARNING: FAILURE, IMPROPER SELECTION OR IMPROPER USE OF ANY HYDRAULIC PRODUCTS AND/OR SYSTEMS OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. Princess Auto provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change without notice.

OIL RESERVOIRS

OIL RESERVOIRS • 12-gauge steel construction • Cleaned and tested for leak free performance • Interior coated with rust preventative oil Gallon ratings of the reservoirs are based upon a 75% usable volume. A) RESERVOIRS Cap. (gal.) 3.0 5.0 10.0

Ports (NPT) O’all dim. Wt. HxLxW In x Out (lbs.) ITEM PRICE 1-1/4" x 3/4" 6.5" x 12" x 12.2" 18.7 1250040 119.99 1-1/4" x 3/4" 8.3" x 12" x 16.2" 25.6 1250041 149.99 1-1/4" x 1-1/4" 11.8" x 16" x 16.2" 38.4 1250043 169.99

B) RESERVOIRS WITH BAFFLE • Interior baffle between suction and discharge sides of tank • 1/4 turn chrome breather/filler cap with 150 micron strainer basket • Temperature/level gauge • 5 ports – two 2" NPT suction ports – one 3/8" NPT port for pumps with case drain – one 3/4" NPT bottom drain port – one 1-1/4" NPT top mounted return port with steel down tube to prevent aeration Cap. (gal.) 15.0 25.0

O’all dim. Wt. (lbs.) ITEM HxLxW 19" x 16" x 16.2" 66.8 1250096 20.4" x 16" x 24.2" 89.2 1250097

B PRICE 319.99 399.99

ECONOMY RESERVOIRS 5 GALLON • Inlet/outlet ports: 1-1/4"/3/4" NPT • O’all dim.: 8.7"H x 16.5"L x 12"W 1250106 – Wt. 25.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 10 GALLON • Inlet/outlet ports: 1-1/4" NPT • O’all dim.: 11.5"H x 16.5"L x 16.5"W 8001466 – Wt. 38.2 lbs. . . . . . . . . . . . . . . . . . . . .

8999

12999

CUSTOM BUILT STORAGE TANK WITH BAFFLE Ready in 15 working days* (for a maximum order of 5 pieces). Special quotes can be provided for orders of 10 pieces or more!

FEATURES: • Can be built to any dimensions to fit most *Delivery time is extra applications • Over 50 possible port positions and 8 different port sizes • Heavy 12-gauge steel construction • Interior baffle plate • Optional features include an oil temperature/level gauge and filler/strainer breather cap assembly • Painted black and treated internally with a rust preventative oil For more information contact your local store, our National Call Centre at 1-800-665-8685, or Gary Laws 1-204-654-5209

OIL RESERVOIRS

OIL TEMPERATURE/ LEVEL GAUGE

Mounts on the side of hydraulic reservoir tank. Temp. Range Bolt Centres Mounting Bolt (Size) Wt. (lbs.) 20° to 70°C (68° to 158°F) 5.0" M12 0.7

ITEM 8093023

PRICE 9.99

MAGNETIC PLUGS • Square head design • Used to protect hydraulic systems by magnetically collecting ferrous particles

Size (NPT) Wt. (lbs.) 1/2" 0.1 3/4" 0.2

ITEM 1293679 1293687

PRICE 2.49 2.99

Size (NPT) Wt. (lbs.) 3/4" 0.3 1" 0.5 1-1/4" 0.7

ITEM 8199275 8199291 8199309

PRICE 9.99 13.99 19.99

Size (NPT) Wt. (lbs.) 1/2" 0.1 3/4" 0.2 1" 0.1 1-1/4" 0.2 1-1/2" 0.3 2" 0.3

ITEM 1290230 1290231 1290232 1290233 1290234 1290235

PRICE 2.49 2.99 3.29 3.49 3.99 3.99

DEEP REACH MAGNETIC PLUGS • Greater magnetic capability for collecting ferrous particles • Magnets reach farther into the system and closer to the areas that generate ferrous contamination

STAMPED STEEL PORT FLANGES • These port flanges make quick and easy work of adding a threaded port to a reservoir • Just cut pilot hole in tank and weld on threaded port flange

RETURN LINE HEAT EXCHANGERS

• Features 26 interval brass cooling tubes • Max. continuous pressure: 170 PSI • Max. continuous flow: 26.4 GPM 99 8113615 – Wt. 26.9 lbs. . . . . . . . . . . .

199

• Allows hydraulic fluid to be either heated or cooled • Can also be used for many other applications where fluid heating or cooling is required • Side oil inlet/outlet ports: 3/4" NPT • Top coolant inlet/outlet ports: 3/4" NPT

• Features 11 internal brass cooling tubes • Max. continuous pressure: 150 PSI • Max. continuous flow: 16 GPM 99 8093007 – Wt. 18.5 lbs. . . . . . . . . . . .

159

JIM DRAPER Date of birth: Dec. 7, 1978 Hair: Bald Missing since: Feb 21, 2006 Eyes: Brown Height: 6 ft. 1"

HAVE YOU SEEN THIS CHILD?

1-800-387-7962

Note: Draper is a diabetic and without his medication he has spells. On the 21st of February, 2006, Jim Draper was last seen on Highway #4, 21 km north of North Battleford, SK at approximately 4:30 a.m. Draper was dropped off on the side of the road and was attempting to get to Witchekan Lake First Nation. He has not been seen since.

A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

All Calls Confidential—No Name Required

HYDRAULIC OIL

HYDRAULIC OIL A) ALL SEASON MULTIGRADE HYDRAULIC OIL • All-season hydraulic oil is designed for hydraulic systems which operate in a wide range of temperatures • Ideal for logsplitters and other all-season equipment • Not suitable for hydrostatic tractor systems 99 8102972 - 4 litre – Wt. 8.1 lbs. . . . . . . . . . . 8102998 - 10 litre – Wt. 19.0 lbs. . . . . . . .

13 3199 5999

8102964 - 20 litre – Wt. 39.2 lbs. . . . . . . . B) TGH HYDRAULIC OIL • A multi-purpose, extreme pressure, tractor transmission/hydraulic fluid • Recommended for transmissions, differentials, final drives, hydraulic, and power steering systems, as well as wet brakes, P.T.O. and hydrostatic drives 99 8212615 - 4 litre – Wt. 8.1 lbs. . . . . . . . . . . 8103004 - 10 litre – Wt. 19.9 lbs. . . . . . . .

14 3499 6499

8103012 - 20 litre – Wt. 40.7 lbs. . . . . . . . TGH ARCTIC HYDRAULIC OIL • Outstanding low temperature performance (-48°C pour point) • Same specs as the above TGH fluid 99 8103020 – Wt. 39.8 lbs. ............................ C) ANTI-WEAR HYDRAULIC OIL • Recommended for high pressure mobile and industrial hydraulic systems where anti-wear hydraulic fluids are specified • Also provides excellent performance in machine tools, servo controls, metal working equipment and air compressor applications • Not suitable for hydrostatic tractor systems ISO Pour Qty. Wt. Rating Point (litre) (lbs.) ITEM PRICE 22 -34°C 20 40.8 8004474 49.99 32 -32°C 20 39.8 6460034 49.99 68 -29°C 20 39.9 6460002 49.99

SORRY, OIL CANNOT BE SHIPPED

SOYFLUID ISO 46 BIODEGRADEABLE HYDRAULIC OIL

• Recommended for use in hydraulic systems near water, in forestry and in other envirommentally sensitive areas • Reduced wear through superior thin-film protection • Maintains stable viscosity through a wide operating temperature range • Good seal compatability • 19 litres 99 8221061 – Wt. 39.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GLYCERINE FILLED PRESSURE GAUGES • Provides longer life and reduces erratic needle movement • Scale shows PSI and Bar • Designed for rugged heavy service • 1/4" NPT thread • 2-1/2" face dia. Mount Type Pressure Range Wt. (lbs.) ITEM Vertical 0 to 2,000 PSI 0.5 8000833 D Vertical 0 to 3,500 PSI 0.5 8000842 D Vertical 0 to 5,000 PSI 0.5 8000851 D Vertical 0 to 7,000 PSI 0.5 8000860 D Horizontal 0 to 3,500 PSI 0.6 8000888 E

D PRICE 12.99 13.99 14.99 15.99 17.99

SUCTION/RETURN LINE STRAINERS & DIFFUSERS

A) 40 MICRON RATED FILTER 10 CFM airflow capacity.

BREATHERS Breather filters are a must for hydraulic systems, ensuring clean air passing into the reservoir. This prolongs the life of the system's components. A

Size (NPT) Wt. (lbs.) 3/8" 0.2 1/2" 0.3 3/4" 0.6 1" 0.7

ITEM 1250090 1250092 1250093 1250094

PRICE 8.99 12.99 15.99 21.99

B) SLIP-ON BREATHER CAP Fits 1-1/2 O.D. pipe. 1252923 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

FILLER/STRAINER BREATHER CAP ASSEMBLIES Mount on reservoirs and storage tanks. Strainer basket prevents debris from entering the tank. C

C) • 40 micron chrome breather cap is attached with a chain and can be taken off by twisting a 1/4" turn • 150 micron strainer basket • Complete with mounting screws and gaskets 99 1250101 – Wt. 0.7 lbs. . .

E D) • Chrome breather cap is attached with a chain and removed by twisting a 1/4 turn • 37 micron strainer basket • Complete with mounting screws and gaskets 99 8092983 – Wt. 0.8 lbs. . . .

E) • 40 micron breather cap threads on to weld on sleeve • Removable strainer basket 99 8163792 – Wt. 1.0 lbs.

SUCTION/RETURN LINE STRAINER & DIFFUSER

• Prevent fine particles from entering and damaging the hydraulic pump or system • Made with #100 mesh stainless steel wire cloth elements, in pleated construction F) SUCTION TYPE 5 GPM RATING • 3" length with 27 sq. in. screen area • 1-1/4" NPT tank mounting • 1" NPT line connection 8163339 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . G) SUCTION TYPE 10 GPM RATING • 6.8" length with 70 sq. in. screen area • 1-1/4" NPT tank mounting • 3/4" NPT line connection • Equipped with a bypass relief valve 1251602 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

G H

I) SUCTION TYPE 7 GPM RATING • 3.8" length with 30 sq. in. screen area • 3/4" NPT line connection 8052292 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

1799

I) SUCTION TYPE 13 GPM RATING • 4.9" length with 40 sq. in. screen area • 1" NPT line connection 8052300 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

2499

I) SUCTION TYPE 21 GPM RATING • 4.9" length with 50 sq. in. screen area • 1-1/4" NPT line connection 99 8052318 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

3299

G) SUCTION TYPE 15 GPM RATING • 8" length with 90 sq. in. screen area • 1-1/2" NPT tank mounting • 1" NPT line connection • Equipped with a bypass relief valve 1250095 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

H) SUCTION TYPE 25 GPM RATING • 9" length with 125 sq. in. screen area • 2" NPT tank mounting • 1-1/4" NPT line connection • Equipped with a bypass relief valve 1251610 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

3499

UNIQUE FLUID SOLUTIONS POWERED BY SERVICE. 40

A A A A

MEMBER OF THE FLUID POWER SOCIETY

• Hydraulic filters are an inexpensive way to protect all your hydraulic components • Choose a filter that is large enough to handle 1-1/2 times the system flow

Duramax filters are widely used in the industrial and mobile markets. They are commonly used as the charge pump filter in hydrostatic transmissions and the return line filter for wet kits used on dump trucks and trailers.

IN-LINE FILTER HEAD • Inlet and outlet ports: 3/8" NPT • Max. continuous pressure: 200 PSI • Max. continuous flow: 7 GPM (return), 2 GPM (suction) • Element threading: 3/4"-16 • No bypass 99 8076085 – Wt. 0.2 lbs.. . . . . . . . . . . . .

DURAMAX® IN-LINE FILTER HEAD • Inlet and outlet ports: 3/4" NPT • Max. continuous pressure: 500 PSI • Max. continuous flow: 35 GPM • Bypass pressure: 25 PSI • Element threading: 1-3/8"-12 • Visual indicator shows when it is time to replace the filter element 8220352 – Wt. 1.6 lbs.. . . . . . . . . . . . . . . . . .

FILTER ELEMENT • Element threading: 3/4"-16 • Media type: cellulose • Filter rating: 10 micron • Filter length: 3.4" 8155327 – Wt. 0.7 lbs. . . . . . . . . . . . . . . .

7999

DURAMAX® FILTER ELEMENTS • Feature synthetic Synteq® filter media for maximum contamination-catching surface area and specific pore size control • Captures 99.5% of particles 8 microns or larger the first time the oil passes through the filter • 10 micron absolute 8220378 – Standard 6" Wt. 1.8 lbs.. . . . . . . . . . . . . . . . . . 8220386 – Long 9.4" Wt. 2.7 lbs.. . . . . . . . . . . . . . . . . .

799

0 to 30 PSI FILTER GAUGE • Can be used with filter heads to indicate when the filter elements need replacement (return line only) • For accurate filter monitoring, mount the return line filter as close to the reservoir as possible • 1/8" NPT threading 99 8040041 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

IN-LINE FILTER HEADS • Max. continuous pressure: 200 PSI • Max. continuous flow : 15 GPM (return), 5 GPM (suction) • Element threading: 1"-12 THESE • Bypass pressure: 25 PSI FILTERS CAN A) 8076069 – 1/2" ports ALSO BE Wt. 0.6 lbs. USED FOR A) 8006258 – 3/4" ports DIESEL FUEL Wt. 0.6 lbs. & GASOLINE. B) 8076077 – 1" ports 99 Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . FILTER ELEMENTS Element Media Type Filter Rating Threading Length Wt. (lbs.) 1"-12 Cellulose 10 Micron 5.2" 1.1 C 1"-12 7.9" 1.7 D Cellulose (Long) 10 Micron 1"-12 Cellulose 25 Micron 5.2" 1.1 C Cellulose 1"-12 25 Micron 5.2" 1.6 C (Water Absorbing)

Wire Mesh

150 Micron

1"-12

5.7"

4999 5499

HYDRAULIC FILTERS

IN-LINE FILTERS & HEADS

HYDRAULIC FILTERS

ITEM PRICE 8038651 7.99 8199051 12.99 8038679 7.99 8038688 14.99 D

1.2 8038697 24.99

IN-LINE FILTER HEAD • Inlet/outlet ports: 1-1/4" NPT • Max. continuous pressure: 150 PSI • Max. continuous flow: 45 GPM (return), 12 GPM (suction) • Element threading: 1-1/2"-16 THESE FILTERS CAN • Bypass pressure: 25 PSI 99 ALSO BE USED FOR 8006267 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DIESEL FUEL &

GASOLINE.

FILTER ELEMENTS Element Media Type Filter Rating Threading 1-1/2"-16 10 Micron E Cellulose 1-1/2"-16 25 Micron E Cellulose F Cellulose 10 Micron 1-1/2"-16 (Water Absorbing) 10 Micron 1-1/2"-16 F Cellulose

Length Wt. (lbs.)

ITEM

PRICE

6.9" 6.9"

2.4 4.0

8038704 8038713

19.99 21.99

10.7"

3.4

8155343

37.99

10.7"

3.2

8155335

26.99

PNEUMATIC PRODUCTS

• Features an aluminum cylinder body and chromed steel shaft • Max. continuous pressure: 130 PSI

END MOUNT CYLINDERS BORE: 0.8" (20 MM) • Ports: 1/8" NPT • Rod dia.: 0.3" (8 mm) • Rod end threading: M8 x 1.25 • Shaft end of cylinder tube: M20 x 1.5 threading (with nut) • Base end features M20 x 1.5 threaded tang (with nut) • Threaded tang: 0.6" (16 mm) wide with 0.3" (8 mm) cross hole Stroke Retracted Length Wt. (lbs.) ITEM PRICE 1" (25 mm) 6.2" (156 mm) 0.5 8188161 14.99 2" (50 mm) 7.2" (181 mm) 0.5 8188179 15.99 3.9" (100 mm) 9.2" (231 mm) 0.6 8188187 17.99 5.9" (150 mm) 11.1" (281 mm) 0.7 8188195 19.99 7.9" (200 mm) 13.1" (331 mm) 0.9 8188203 21.99 9.9" (250 mm) 15.1" (381 mm) 1.0 8188211 23.99 11.9" (300 mm) 17.0" (431 mm) 1.0 8188229 24.99 20 MM NUT– Replacement nut for the above cylinders. 8192460 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8" (20 mm) BORE SEAL KIT 8198236 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299 279

BASE MOUNT TIE ROD CYLINDERS BORE: 1.6" (40 MM) • Ports: 1/4" NPT • Rod dia.: 0.6" (16 mm) • Rod end threading: M12 x 1.25 Stroke Retracted Length Wt. (lbs.) ITEM PRICE 1" (25 mm) 6.6" (167 mm) 1.6 8188237 28.99 2" (50 mm) 7.6" (192 mm) 1.7 8188245 29.99 3.9" (100 mm) 9.6" (242 mm) 1.9 8188252 31.99 5.9" (150 mm) 11.6" (292 mm) 2.4 8188260 33.99 7.9" (200 mm) 13.5" (342 mm) 2.8 8188278 35.99 11.8" (300 mm) 17.5" (442 mm) 3.5 8188286 39.99 19.7" (500 mm) 25.3" (642 mm) 5.0 8188294 49.99 1.6" (40 mm) BORE SEAL KIT 99 8192684 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BORE: 2.5" (63 MM) • Ports: 3/8" NPT • Rod dia.: 0.8" (20 mm) • Rod end threading: M16 x 1.5 Stroke Retracted Length Wt. (lbs.) ITEM PRICE 3.9" (100 mm) 10.0" (253 mm) 3.6 8188302 49.99 5.9" (150 mm) 12.0" (303 mm) 4.3 8188310 54.99 7.9" (200 mm) 14.0" (353 mm) 4.8 8188328 59.99 11.8" (300 mm) 17.9" (453 mm) 6.0 8188336 74.99 15.7" (400 mm) 21.8" (553 mm) 7.3 8188344 99.99 2.5" (63 mm) BORE SEAL KIT 99 8192700 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BORE: 3.2" (80 MM) • Ports: 3/8" NPT • Rod dia.: 1" (25 mm) • Rod end threading: M20 x 1.5

Note: All pneumatic inch measurement specifications are approximate.

Stroke Retracted Length Wt. (lbs.) ITEM PRICE 3.9" (100 mm) 11.2" (282 mm) 6.6 8188351 69.99 5.9" (150 mm) 13.1" (332 mm) 7.5 8188369 74.99 7.9" (200 mm) 15.1" (382 mm) 8.4 8188377 79.99 11.8" (300 mm) 19.0" (482 mm) 10.2 8188385 94.99 15.7" (400 mm) 23.0" (582 mm) 12.1 8188393 109.99 19.7" (500 mm) 26.9" (682 mm) 14.1 8188401 124.99 3.2" (80 mm) BORE SEAL KIT 99 8192718 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SEE PAGE 43 FOR ROD AND BASE ENDS.

PNEUMATIC PRODUCTS

SINGLE ACTING CYLINDER • Features an aluminum cylinder body and chromed steel shaft • Bore size: 1.3" (32 mm), stroke: 1" (25 mm) • Port size: 1/8" NPT • Shaft dia.: 0.5" (12 mm) • Rod end threading: M10 x 1.25 • Max. continuous pressure: 100 PSI NORMALLY SPRING RETRACTED Extended length: 3.3" (83 mm) 8041394 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

1.3" (32 mm) BORE SEAL KIT 8192676 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

99¢

CYLINDER BASE ENDS Can be used on the tie rod pneumatic cylinders to change the base end configuration. FOOT MOUNT ENDS A) FOR 1.6" (40 MM) BORE CYLINDER 8188419 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A) FOR 2.5" (63 MM) BORE CYLINDER 8188427 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A) FOR 3.2" (80 MM) BORE CYLINDER A 8188435 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MALE TANG ENDS

CLEVIS ENDS

B) FOR 1.6" (40 MM) BORE CYLINDER 0.6" (14 mm pinhole). 8189763 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . B) FOR 2.5" (63 MM) BORE CYLINDER 0.6" (15 mm pinhole). 8189797 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) FOR 3.2" (80 MM) BORE CYLINDER 0.8" (20 mm pinhole). 8189813 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

Tang Thickness 0.3" (8 mm) 0.4" (9 mm) 0.5" (13.5 mm) 0.6" (16 mm) 1.0" (24 mm)

C) FOR 1.6" (40 MM) BORE CYLINDER 0.5" (12 mm pinhole) 8189821 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . C) FOR 2.5" (63 MM) BORE CYLINDER 99 0.6" (16 mm pinhole). 8189839 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . C) FOR 3.2" (80 MM) BORE CYLINDER 99 0.8" (20 mm pinhole). 8189847 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . 99

599

799

1199

Can be used on the tie rod pneumatic cylinders to change rod end configuration.

CYLINDER ROD ENDS D) TANG ENDS Threading 8 mm x 1.25 10 mm x 1.25 12 mm x 1.25 16 mm x 1.5 20 mm x 1.5

199/ea. 249/ea. 299/ea.

Pinhole Dia. Wt. (lbs.) 0.3" (8 mm) 0.1 0.4" (10 mm) 0.1 0.5" (12 mm) 0.3 0.6" (16 mm) 0.7 0.8" (20 mm) 1.3

E) CLEVIS ENDS Threading Clevis Inside Width 8 mm x 1.25 0.3" (8 mm) 10 mm x 1.25 0.4" (10 mm) 12 mm x 1.25 0.5" (12 mm) 16 mm x 1.5 0.6" (16 mm) 20 mm x 1.5 0.8" (20 mm)

Pinhole Dia. Wt. (lbs.) 0.3" (8 mm) 0.1 0.4" (10 mm) 0.1 0.5" (12 mm) 0.3 0.6" (16 mm) 0.8 0.8" (20 mm) 1.5

F) SWIVEL EYES Grease nipple for easy lubrication. Threading Eye Thickness Pinhole Dia. Wt. (lbs.) 8 mm x 1.25 0.5" (12 mm) 0.3" (8 mm) 0.1 10 mm x 1.25 0.5" (14 mm) 0.4" (10 mm) 0.2 12 mm x 1.25 0.6" (16 mm) 0.5" (12 mm) 0.2 16 mm x 1.5 0.8" (21 mm) 0.6" (16 mm) 0.5 20 mm x 1.5 0.8" (20 mm) 0.8" (20 mm) 0.9

ITEM 8004013 8190217 8190233 8190241 8190308

PRICE 4.99 4.99 4.99 6.99 9.99

ITEM PRICE 8041287 5.99 8190175 5.99 8190183 5.99 8190191 7.99 8190209 11.99

ITEM 8004014 8190324 8190332 8190340 8190357

PRICE 5.99 7.99 11.99 14.99 19.99

PNEUMATIC PRODUCTS

PNEUMATIC VALVES LEVER CONTROL VALVES A) 5-WAY, 2-POSITION • Max. continuous pressure: 115 PSI • Max. continuous flow: 56 CFM • Ports: 1/4" NPT pressure, 1/8" NPT exhaust • Control 1 double or 2 single acting pneumatic cylinders 99 8190373 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

5-WAY, 3-POSITION • Max. continuous pressure: 115 PSI • Max. continuous flow: 56 CFM • All ports blocked in central neutral position B) PORTS: 1/4" NPT PRESSURE, 1/8" NPT EXHAUST 8190415 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . C) PORTS: 3/8" NPT PRESSURE, 1/4" NPT EXHAUST 8190456 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

2499

2999

PUSH BUTTON CONTROL VALVE

FOOT PEDAL CONTROL VALVE

5-WAY, 2-POSITION • Max. continuous pressure: 115 PSI • Max. continuous flow: 47 CFM • Momentary actuation • Three 1/4" NPT pressure ports and two 1/8" NPT exhaust ports 99 8190472 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . .

5-WAY, 3-POSITION • Max. continuous pressure: 115 PSI • Max. continuous flow: 52 CFM • Ports: 1/4" NPT 8192429 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . .

ROLLER TYPE LEVER CONTROL VALVE

ROTARY CONTROL VALVE

3-WAY, 2-POSITION • Max. continuous pressure: 115 PSI • Max. continuous flow: 47 CFM • Ports: 1/4" NPT • Normally closed 8192437 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

AIR FLOW (SPEED) CONTROL

4-WAY, 3-POSITION • Use to control double acting or 2 single acting cylinders • Max. continuous pressure: 115 PSI • Max. continuous flow: 35 CFM • Ports: 1/4" NPT 8190480 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

3999

1999

12 VDC SOLENOID ACTIVATED CONTROL VALVE

• Max. continuous pressure: 130 PSI • Features controlled flow in one direction and full flow in the opposite direction • Ports: 1/4" NPT MAX. CONTINUOUS FLOW: 8.5 CFM 99 5-WAY, 3-POSITION 8004050 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . • Max. continuous pressure: 115 PSI MAX. CONTINUOUS FLOW: 17.0 CFM 99 • Max. continuous flow: 52 CFM 8192411 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . • Ports: 1/4" NPT pressure, 1/8" NPT exhaust • Manual release valves MAX. CONTINUOUS FLOW: 28.0 CFM 99 99 8192262 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . 8004051 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

7 9 11

All valves feature: • Forged brass body, NBR diaphragm • 2-way, 2-position • Normally closed A

Max. Cont. Flow (CFM) 18.5 A 12 VDC 22 B 110 VAC 22 C 12 VDC 11 D 12 VDC 7 E 110 VAC Volts

Also suitable for water and oil

Ports 1/4" NPT 1/2" NPT 1/2" NPT 3/8" NPT 1/4" NPT

Max. Cont. Current Draw Wt. Pressure (PSI) (AMPS) (lbs.) 100 1.3 0.6 215 0.35 3.8 215 1.7 3.5 100 1.3 1.9 100 0.12 0.7

ITEM

PRICE

8192270 8081903 8192296 8192304 8041444

24.99 69.99 79.99 39.99 37.99

PNEUMATIC PRODUCTS

SOLENOID VALVES

SILENCERS

SHUTTLE VALVE

• Controls noise caused by airflow through valves • Max. continuous pressure: 130 PSI • Noise elimination effect: 18 dB Flow at the outlet port will originate at the inlet Wt. 6.0 lbs. port having the highest pressure. 99 8192445 – 1/8" NPT, brass 8198814 – Wt. 0.3 lbs.. . . . . . . . . . . . . . . . . . . . 8192452 – 1/4" NPT, brass . . . . . . . . . . . . . . . . . .

PNEUMATIC FITTINGS

MALE/FEMALE HOSE COUPLER TEE Wt. Item Price 0.1 8092579 3.99

MALE HOSE COUPLER Wt. Item Price 0.1 8092595 2.19

90º SWIVEL FEMALE MALE HOSE COUPLER HOSE COUPLER Wt. Item Price Wt. Item Price 0.1 8092561 3.99 0.1 8092603 2.49

90º MALE HOSE COUPLER Wt. Item Price 0.1 8092611 2.49

90º MALE HOSE COUPLER Wt. Item Price 0.1 8092629 2.99

199

• Hose(s) easily push into the fitting creating an airtight seal • Max. continuous pressure: 130 PSI • Hose size: 1/4" O.D. • Fitting thread size: 1/4" NPT

MALE HOSE COUPLER TEE Wt. Item Price 0.1 8092652 2.69

MALE “Y” HOSE COUPLER Wt. Item Price 0.1 8092660 3.99

HOSE COUPLER

90º HOSE COUPLER

Wt. Item 0.1 8092694

Price 1.99

HOSE TEE Wt. Item 0.1 8092710

Price 2.49

Wt. Item 0.1 8092702

Price 1.99

HOSE “Y” COUPLER Wt. Item 0.1 8092728

Price 2.99

PNEUMATIC PRODUCTS

PNEUMATIC FITTINGS

MALE TEE HOSE COUPLER Wt. Item Price 0.1 8092645 2.99

BULKHEAD HOSE COUPLER Wt. Item Price 0.1 8092769 3.99

HOSE CROSS COUPLER Wt. Item Price 0.1 8092736 3.99

5-WAY HOSE COUPLER Wt. Item Price 0.1 8092744 4.99

MALE 90º SPEED CONTROL HOSE COUPLER

MALE PLUG For pluging fitting connections

Wt. Item Price 0.1 8163099 1.49

POLYETHYLENE PNEUMATIC HOSE

• Metered airflow in one direction full flow in the other • Max. continuous pressure: 130 PSI • Hose O.D.: 1/4" • End Size: 1/4" NPT 8092553 – Wt.0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• 1/4" OD • Max. continuous pressure: 125 PSI • Temperature range: -40°C - 71°C (-40°F - 160°F) • Length: 100 ft.

NYLON PNEUMATIC HOSE BY THE FOOT

Colour Blue Red Yellow Green Clear

Wt. (lbs.) 1.1 1.0 1.1 1.1 1.0

ITEM 8134868 8134876 8134884 8134900 8112682

PRICE 11.99 11.99 11.99 11.99 11.99

• 1/4" O.D. • D.O.T. approved for airbrake systems • Max. continuous pressure: 300 PSI • Temperature range: -40°C - 93°C (-40°F - 200°F) 8133811 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . .

899

49¢/ft.

LOGSPLITTER ACCESSORIES LOG CATCHER

• Save time and reduce backstrain when splitting wood • Catches half the log while you split the other half • Attaches to the 25 ton logsplitter (8203929) in minutes 8208308 – Wt. 14.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LOGSPLITTER COVERS

• Protects logsplitter from the elements • Made of heavy PVC coated polyester • UV and mildew resistant 15 TON 8217267 – Wt. 5.3 lbs. . . . . . . . . . . . . . . . . . . . . 22 to 35 TON 8217259 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . .

5499

LOG JACK

59 79

• Takes the effort out of lifting logs • Hold logs up to 8" off the ground for clean and safe cutting 99 • Handles logs from 3" to 15" diameter • Converts into a cant hook to remove logs 99 99 8217283 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . . .

LOGSPLITTERS

LOGSPLITTERS 4 TON ELECTRIC LOGSPLITTER with STAND

• Splits logs up to 20" in length • Two hand safe splitting operation, hands-free retraction • Comes mounted on a low profile base, includes stand for working height operation • 12 second cycle time • 120VAC, 2 HP electric motor • 3/4 gallon (3 litre) reservoir capacity • Recommended extension cord if needed: 14/3 gauge up to 25 ft. 8197824 – Wt. 120.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29999

15 TON LOGSPLITTER

For off-road towing only!

• Split logs up to 19" in length • Hands free knife return and kick-off for more efficient splitting • 8 second cycle time@ no load • 6-1/2 HP OHV gas engine with low oil shut down coupled to a two-stage hydraulic pump • Hydraulic suction line filter for component protection • 2.5 gallon (9.5 litre) reservoir capacity • 2" trailer ball coupler and 4.80 x 8" tires with bearings 8191660 – Wt. 355.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25 TON HORIZONTAL/VERTICAL LOGSPLITTER

119999

Log catcher saves time and reduces back strain

Wide log cradle makes splitting easier and safer

• Split logs up to 26" in length • Easily changes from horizontal to vertical splitting for those larger logs • Hands-free knife return and kick-off for more efficient Reinforced stripper plates splitting remove wood from wedge • Cutting wedge removes for sharpening • 18 second cycle time at no load • Honda GVC 160 directly coupled to a 2-stage pump • Suction line filter for component protection • 7-3/4 gal (29 litre) reservoir capacity • 2" trailer ball coupler and 4.80 x 8" tires with bearings 8203929 – Wt. 590.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

169999

FUEL TRANSFER PUMPS & ACCESSORIES

OIL & FUEL TRANSFER PUMPS

• Thermally protected, explosion-proof 1/4 HP motor • Cast iron body construction • Positive displacement, rotary vane configuration • 30-minute duty cycle • Ball bearing construction, no lubrication required • Each accessory added represents a 10% decrease in flow FR152

B FR1604

A SD1202A E C

FR1204

SD1202 & SD602 FR610C F

FR1210C & FR4210

LP50P18Q115

CHECK OUT THE FULL DISPLAY AT YOUR LOCAL STORE! ITEM

Description

Volts

Hose

Applications

US GPM

Wt. PRICE (lbs.)

Heavy Duty A) and Petroleum20 per 16.0 N/A 8 ft. Petroleum 159.99 2460027 Dual-Action Based Products 100 strokes Pump Economy @ 12V B) Gear Oil, Lube Oil, 710.5 Duty 12/24 DC 12 ft. Kerosene,Diesel @ 22.2 229.99 8008737 Fuel Dual-Electric 24V Diesel Fuel, Gasoline, C) Replacement 21.0 319.99 15 8003917 Pump Only 12 DC N/A Kerosene, Heptane, Mineral Spirits, Stoddard Solvent Diesel Fuel, Gasoline, Standard Duty D) 12 DC 10 ft. Kerosene, Heptane, Mineral Electric 2460069 Spirits, Solvents Diesel Fuel, Gasoline, D) Standard Duty 115 AC 10 ft. Kerosene, Heptane, Mineral 2460070 Electric Spirits, Solvents Standard Duty E) Diesel Fuel, Gasoline, Electric 12 DC 10 ft. Kerosene, 2460071 Mineral Spirits Auto Nozzle Diesel Fuel, Gasoline, F) Heavy Duty 12 DC 12 ft. Kerosene, Heptane, Mineral 2460028 Electric Spirits, Stoddard Solvent G) Heavy Duty 8066565 Electric F) Heavy Duty 2460029 Electric H) Oil Transfer 8102154 Pump

Diesel Fuel, Gasoline, 115 AC 12 ft. Kerosene, Heptane, Mineral Spirits, Stoddard Solvent Diesel Fuel, Gasoline, 12 DC 12 ft. Kerosene, Heptane, Mineral Spirits, Stoddard Solvent Hydraulic Fluids, Motor Oil, 115 AC 8 ft. Waste Oils, Gear Lube, Antifreeze, Cutting Oils

29.0 289.99

27.9 339.99

30.2 349.99

34.2 369.99

30.8 399.99

35.4 429.99

57.5 419.99

• Includes: 1" x 20 ft. fuel hose, 1" high flow automatic nozzle, 25 ft. 10/3 wire battery cables, high flow 30 micron filter, pipe fittings and 1" steel telescoping suction pipe • Fill Quik™ system is 30% lighter and draws 35% less amps than other comparable pumps • Suitable for gasoline, diesel and kerosene • Heavy cast iron pump housing with thermally protected motor 99 8099129 – Wt. 52.2 lbs. . . . . . . . . . . . . . . . .

749

PUMPS 100 GALLONS (376 LITRES) IN 6 MINUTES

FR4210DBFQ

REPLACEMENT HIGH FLOW FUEL FILTER • 30 micron • Handles flow rates up to 40 GPM • Minimizes volume transfer loss compared to regular filters 8099871 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.99

FUEL METERS

• Quick reset knob • Large easy to read numbers • Accurate within ± 1% @ 5 to 20 GPM (19 to 76 LPM) • Register total use up to 999.9 litres • O’all dim.: 6" x 5-1/2" x 4-3/4" • 3/4" ports 2460026 – Wt. 5.5 lbs. . . . . . . . . . . . . . .

HIGH FLOW FUEL METER

18999

AUTOMATIC FUEL NOZZLES

Automatic shut off. 3/4" INLET AND OUTLET (RED) 2460015 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . 1" DIESEL (GREEN) Can be used for diesel or unleaded fuel. 8050130 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . .

6499 7999

MANUAL FUEL NOZZLE

3/4" inlet and outlet. 8000928 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . 1" inlet and outlet. 8028724 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . .

2499 2499

• Quick reset knob • Large easy to read numbers • Register total use up to 999.9 litres • Can handle up to 40 GPM • Compatible with diesel, gasoline and kerosene • Minimizes volume transfer loss compared to regular meters • O’all dim.: 8" x 5-1/4" x 5-1/2" • 1-1/4" ports 99 8099160 – Wt. 9.6 lbs . . . . . . . . . . . . . . . .

249

HIGH FLOW AUTOMATIC FUEL NOZZLE

FUEL TRANSFER PUMPS & ACCESSORIES

FILL QUIK™ HIGH PERFORMANCE FUEL TRANSFER SYSTEM

• 1" inlet and outlet • For use with 20 GPM fuel pumps and higher • Suitable for gasoline or diesel • Minimizes volume transfer loss compared to regular nozzles 99 8099152 – Wt. 3.4 lbs. . . . . . . . . . . . . . . .

129

FUEL HOSE • Agriculture type hose used for dispensing gasoline, grease, kerosene, and petroleum • Ideal for use with electric pumps • Reinforced with static wire Size Wt. (lbs.) ITEM PRICE 3/4" x 12 ft. 4.2 8001836 29.99 3/4" x 14 ft. 4.6 8001837 32.99 3/4" x 20 ft. 6.4 8066623 44.99 1" x 20 ft. 9.4 8066631 59.99

AIR OIL BARREL PUMP • Fits drum with NPT 1-1/2" or NPT 2" bung diameter • The medium can be gasoline coal oil and other hydraulic oil • Maximum working air pressure: 10 PSI • Air inlet size: 1-1/4" to 18" NPT with quick disconnect • Pump capacity: oil at 12 gallons per minute • 1-1/4" dia. x 44" suction tube, pressure gauge and regulator 8205494 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999

FUEL TRANSFER PUMPS & ACCESSORIES

BRASS “JIGGLER” SIPHON

FUEL FILTERS

• 3/4" x 6-1/2 ft. anti-static hose • Rapidly move brass valve up and down to start fluid flow 2460065 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

FOR GASOLINE & DIESEL FUEL • Can be used with fuel containing alcohol • Use both filters in combination for the best possible fuel protection • 150 PSI working pressure • 5 GPM gravity flow, 14 GPM max. flow • Alcohol and impact resistant plastic “see-thru” bowl with drain valve ASSEMBLY with FILTER 10 MICRON FILTER Removes dirt particles.

849

BLACK RUBBER FUEL LINE Wt. 0.1 lbs

I.D. 3/16" 1/4" 5/16" 3/8"

ITEM 2461382 2461390 2461408 2461416

PRICE 0.99/ft. 1.19/ft. 1.39/ft. 1.59/ft.

IN-LINE FUEL FILTERS A

Wt. 2.4 lbs.

2460035 – 3/4" NPT ports 99 2460277 – 1" NPT ports . . . . . . . . . . . . . /ea. Wt. 0.1 lbs. REPLACEMENT FILTER Mat'l Inlet 2460285 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . 6.99 A Plastic 1/4" to 5/16" 30 MICRON FILTER 99 B Nylon 1/4" to 5/16" 8099871 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . 1/4" C Steel ASSEMBLY with WATER ABSORBING FILTER

ITEM 8180069 8180051 8180028

PRICE 1.49 1.99 2.49

Wt. 2.5 lbs.

SPIN-ON FUEL 2460036 – 3/4" NPT ports 99 2461226 – 1" NPT ports . . . . . . . . . . . . . /ea. FILTERS REPLACEMENT WATER ABSORBING FILTER CELLULOSE FUEL FILTER 2461234 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . 15.99 • 10 micron • 50 PSI working pressure • 12 GPM max. flow HAND OPERATED • Filter for dirt, rust, scale, etc. PISTON PUMP 8038651 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . .

799

WATER BLOCK FILTER with 1" NPT PORTS

2460039 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . 19.99

FILLER CAP • Fits 5 and 6 gal. pails as well as 15, 30, and 55 gal. drums • Dispenses 8 oz. per stroke • Can be adjusted to pump 2, 4, or 6 oz. per stroke • Sturdy plastic construction 2461325 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

Vented filler cap with a 2" base for fuel tanks. 8192395 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . .

2999

TOP CAP

Heavy duty zinc die-cast housing. 3/4" NPT PORTS

2460040 – Wt. 1.6 lbs

3 PC FUEL DRUM PIPE

1" NPT PORTS

2460041 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . .

1699/ea.

12 V IN-LINE FUEL PUMP 8110009 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . .

2199

BUNG NUT

• Fits 1-1/4" O.D. pipe • 2" NPT threaded end 2460030 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Provides fuel when engine demands • Suitable for carbureted 6 to 8 cylinder engines • Pressure: 5 to 9 PSI, flow: 20 to 30 GPH • Install with or without present mechanical fuel pump • Use in passenger cars, light duty trucks, boats, tractors or stationary engines with negative ground 99 99 8144354 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . .

OUTBOARD MOTOR OIL PUMP

A B 500 ml (16 oz.) cap. A) PLASTIC 8025521 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . B) METAL 4270073 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . .

• Fits standard quart containers • Two adapters: 3/8" x 16 and M10 x 1.5P for outboard gear case and power-trim-and-tilt reservoir fills 99 99 8167512 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

6 1199 TRANSFER PUMP KIT

TRANSFER PUMP

• 473 ml (1 pint) per stroke • Dual action transfer pump • Two 3/8" x 48" hoses • Metal body 4270185 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

1499

• 30 mL/stroke • Use to siphon fluids including diesel, oil and pesticides • Includes: two 4 ft. transfer hoses, one 31" narrow bore hose (ideal for dipstick tubes), one 17" hose with clip-on connector (for tire inflation) 99 8006283 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

FUEL PUMPS C

FUEL TRANSFER PUMPS & ACCESSORIES

SUCTION GUNS

MATERIAL/ CONSTRUCTION

Housing: Pipe: Spout: Impeller: Bung Nut: Handle:

PIPE STYLE PIPE LENGTH BUNG NUT FLOW RATE

USES

NOT FOR USE WITH

C) 8003174 Cast Iron Steel Steel Cast Iron Cast Iron Cast Iron 2 pc 36" 2" NPT 325 ml/stroke

D) 2460057 Cast Iron Steel Steel Cast Iron Cast Iron Cast Iron 2 pc telescopic 43" 2" NPT 300 ml/stroke

E) 8167595 Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene 3 pc 45" 2" NPT 250 ml/stroke

F) 8167561 Polypropylene Polypropylene Polypropylene Rayton Polypropylene Rayton 3 pc 45" 2" NPT 250 ml/stroke Petroleum Gasoline, gear Gasoline, gear oil, products, water oil, diesel, light diesel, light oil, Oil based medium based fluid and oil, kerosene kerosene freeze, chemicals, acids Water, water Antifreeze, acids, Acetone, lacquer, based solutions, Water, water based water based solutions, corrosive mineral oils, corrosive medium, lacquer, solvents, solutions turpentine solutions gasoline, solvent Wt. 11.6 lbs.

Wt. 11.2 lbs.

Wt. 5.0 lbs.

Wt. 4.8 lbs.

9999

GREASE & OIL

BARREL PUMP

OIL PUMP PAIL NOT INCLUDED

• Delivers 11 oz per stroke • Die-cast and steel design • Standard 2" bung • Garden hose threads on spout THREADED • For use with most oil SPOUT based fluids • Includes telescoping steel suction pipe 99 8066599 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . . .

• Suitable for transmission, differential, and heavier oils • Dispenses 500 ml (17 oz) per stroke • For use with 20 litre (5 gal) pails • 4 ft. hose with steel discharge outlet 8057425 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . .

2999

OIL PANS

A) 8 LITRE CAPACITY ROUND PAN • 14" round drain pan • Easy-pour spout, comfortable sturdy handles 8058117 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 9 LITRE CAPACITY TRIANGULAR PAN • Heavy duty drain pan • Drainage post for oil filter • Easy-pour spout, thick-walled sturdy construction 8058125 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

C C) OIL DRAIN PAN • Cap.: 15 litres (4 US gal.) • Black polyethylene material • Splash guard rim and top mounted pour spout minimizes spillage 79 99 8006588 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . .

FUNNELS

MEASURING FUNNEL F G

D E

D) PLASTIC FUNNEL Tabs on spout provide better fit and stability. 8003426 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) 9-1/2" PLASTIC FUNNEL 9-3/4" tall. 8007462 – Wt 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) 6" METAL FUNNEL 12" long flexible spout. 8035501 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) 6" PLASTIC FUNNEL with HANDLE • 1-1/2 qt. capacity • Flexible 13" spout and 24" tubing 4270167 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

METAL OIL CANS

• Brass pump • Flexible hose Size Wt. (lbs.) ITEM 6 oz. (200 ml) 0.4 4270014 16 oz. (500 ml) 0.7 8035495 34 oz. (1,000 ml) 0.9 4270016

299 399 • 1 litre funnel allows user to measure and dispense desired amount • Removable on/off spout with 12" extension tube and drip cap 99 8099673 – Wt. 0.3 lbs. . . . . . . . . . .

799 5

749

GALVANIZED FUNNEL

PRICE 4.49 6.99 9.99

• 6 litre • 9" opening 8213969 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . .

1499

C A

GREASE & OIL

GREASE GUNS D

F E

G A) MINI GRIP GREASE GUN Holds up to 120 cc bulk, or 3 oz. cartridge. 99 4274122 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . B) LEVER GREASE GUN 3-way load: 14 oz. cartridge, bulk, or dispenser. 99 4274106 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . C) PISTOL GRIP GREASE GUN 3-way load: 14 oz. cartridge, bulk, or dispenser. 99 4274114 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . D) PISTOL GRIP GREASE GUN • Die-cast head with 14 oz. capacity • Hardened and ground piston 99 8084063 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . E) AIR OPERATED GREASE GUN • 1-handed grease gun delivers 1,500 to 6,000 PSI each time the trigger is pressed (when attached to a compressed air supply of 30 to 150 lbs.) • 3-way load: 14 oz. cartridge, bulk, or dispenser • Equipped with both a metal and flexible spout • Handle threaded for 1/4" NPT fitting 99 4270328 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . F) COMBINATION GREASE GUN • Kit includes an air operated grease gun and a lever action gun head to use when there is no air supply • 3-way load: 14 oz. cartridge, bulk (400 cc), or dispenser • Flexible and metal spouts included • 1/4" NPT air coupler, plug, and barb adapter 99 8003180 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . .

13 19 24

STRAIGHT

ANGLE

169

GREASE FITTINGS

GREASE FITTING 5-PACKS Pkg. of 5 – Wt. 0.1 lbs. Description 1/4" 28 5/16" Drive-In 3/16" Drive-In 1/4" Drive-In 1/8" Pipe 1/4" 28 45° 1/4" 28 90° 1/4" 28 67-1/2° 1/8" Pipe 67-1/2° 1/8" Pipe 90°

G) PROFESSIONAL AIR GREASE GUN • Durable air motor construction for extended life and quieter operation • Self priming and fully automatic: cycles continuously while trigger is pulled • 40:1 compression ratio • 40 to 150 PSI operating pressure • Develops 6,000 PSI max. • Includes 9" flexible hose and metal spout • 3-way load: 14 oz. cartridge, bulk, or dispenser 99 8001915 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . H) CORDLESS GREASE GUN • Completely cordless - no more tangling or tugging air hoses or cords • Powerful 18 volt battery - the strongest of any grease gun • Heavy duty motor delivers over 7,500 PSI of force • 1-hour quick charger (100 volt) • Two 18 volt 1,500 mAh long-life Ni-Cd batteries included • Extra long 42" rugged professional-grade flex hose • Coupler with durable bend restricters on both ends for extended hose life • Ergonomically balanced to minimize operator strain • 3 loading options: cartridge, suction and bulk loading • Shoulder strap to reduce user fatigue • Detailed easy-to-follow user manual • Heavy duty plastic storage case 99 8192924 – Wt. 18.2 lbs. . . . . . . . . . . . . . . . .

ITEM 4270017 4270022 4270024 4270025 4270027 4270018 4270019 4270020 4270030 4270031

PRICE

299 399

100 PC SAE GREASE FITTING KIT 8 size varieties: straight, 45°, and 90° angles. 4270294 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

2299

GREASE & OIL

GREASE FITTING TOOLS A) GREASE FITTING TOOLS • Removes and installs grease fittings • Spiral extractor removes broken fittings SMALL Tap repairs 1/4"-28 UNF threads, wrench removes 5/16", 3/8" hex fittings and plugs. 4270093 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . LARGE Tap repairs 1/8"-27 NPT threads, wrench removes 7/16", 3/8" hex fittings and plugs. 4270094 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

A B B) ZERK CLEANING TOOL • Clears grease fittings of hardened matter • Fits both straight and angled zerk style fittings • Fill with oil or grease, hold against zerk fitting, and strike with hammer to clear fitting 99 99 4270160 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

699

GREASE INJECTOR TOOL

GREASE GUN HOLDER • Convenient storage caddy • Drip tray to keep storage area clean • Clip to hold flexible nozzles in place 8041543 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

• Max. 3,000 PSI • Easily inserts under or through bearing seals • For use with hand grease guns only • Includes protective cover 99 4270204 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

GREASE GUN HOSE

PRECISION OILER C

C) FLEXIBLE GREASE GUN HOSE • Threaded at both ends • Max. 3,500 PSI Length Wt. (lbs.) ITEM PRICE 18" 0.2 4270089 6.99 4270090 7.99 D) FLEXIBLE GREASE GUN HOSE • Threaded at one end • Grease fitting coupler at other end • Max. 4,500 PSI Length Wt. (lbs.) ITEM PRICE 9" 0.2 4270039 3.49 18" 0.2 4270047 7.49 E) REPLACEMENT GREASE FITTING COUPLER 8128241 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 3.49

• For the exact placement of oil or any other lubricant • Screw on cap • Pocket clip • O’all length: 5-5/8" 8001660 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

GREASE GUN EXTENSION

• 6" steel tube with coupler • Threaded at both ends • 10,000 PSI max. pressure 8128522 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

MANUAL GREASE DISPENSER

12" FLEX GREASE HOSE

• 12" flexible hose with 1/8" NPT fittings at each end • Right angle grease coupler is specially designed seal and slot in coupler housing provides 90° access into areas with minimal clearance • Quick grease coupler allows quick and easy connection with any standard grease gun • Heavy constructed zinc • Ideal kit for grease fittings in confined areas plated steel body • Allows the operator to elminate the need for • Die-cast head and adjusting flange changing coupler on grease gun and flexible • 18" pump drum cover hoses 99 • For 20 kg drum 8182560 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . • Delivery: 14 oz/420 gms/15 strokes • Zinc plated handle for pumping MINI MULTIPURPOSE • With bulk filling plug to suit all common grease guns LITHIUM GREASE • Special design to easily load bulk grease • Follower plate helps eliminate air or maximizes pump efficiency • Maintained by steel tube and plug for clean and • Fits mini grease gun leak free feeding 4274122 (on previous page) • Metallic spout with 2 grease nipples: 9 mm and • 3 oz. 14.7 mm 99 99 8007270 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 8205627 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . .

ALL GREASE IS NLGI RATED TO GC-LB STANDARDS BLUE MAX LITHIUM GREASE • Multi-purpose lithium complex • Extreme pressure and anti-wear properties • For chassis lubrication, high and low speed wheel bearings, universal joints, and general industrial and automotive applications 49 8001938 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . SILVER MAX MOLY/LITHIUM GREASE • 3% molybdenum/lithium complex grease RED MAX ALUMINUM GREASE • For equipment subjected to heavy shock • Extreme pressure multi-purpose aluminum loading, on slow oscillating or reciprocating complex grease for high temp. applications bearings • Offers anti-rust, oxidant, wear and scuff • Ideal for stable lubricating ability over long properties periods of heavy use • Excellent water resistance • For on and off-road equipment, construction • For 5th wheels, U-joints, king pin and ball and mining equipment, 5th wheels, and general joints, torque arms, logging and transport industrial applications trucks, and earth moving equipment 99 79 8001937 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . 8001936 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

GENERATORS

GREASE

GENERATORS 6,500 WATT GENERATOR G W

WITH REMOTE START!

• 13 HP OHV engine with low oil shutdown • 6,500 watts maximum output • 5,000 watts continuous output • Electric start • 2 duplex receptacles, 120V, 20A • Four blade twist lock receptacle, 120/240V, 30A • 6.5 gallon (25 litre) fuel tank cap. with gauge • Runs 9 hrs @ 50% load • 74 dB • Battery not included 99 8088841 – Wt. 182.6 lbs. . . . . . . . . . . . .

G W

120V

G W

120V G Y

120V X W

120V/240V

749

POWER EQUIPMENT COVERS

• All season protection for your equipment against rust, dirt, and sun damage • Heavy duty fabric with water resistant coating won’t shrink or stretch • Generator not included SNOW BLOWER Fits 2-stage snow throwers. 99 8182388 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . PRESSURE WASHER • Elastic shock cord on hem for a quick fit • Fits vertical and horizontal models 99 8182404 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . GENERATOR MEDIUM • Fits up to 3,000W generators • Size: 25" x 19" x 21" 99 8182412 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

34 21 19

GENERATOR LARGE • Fits up to 7,000W generators • Size: 35" x 24" x 30" 8182420 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . GENERATOR X-LARGE • Fits up to 15,000 generators • Size: 49" x 30" x 32" 8182438 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . .

2499 3299

ELECTRIC MOTORS

ELECTRIC MOTORS GENERAL PURPOSE

• These open drip-proof motors are ideal for hydraulic pumps, gear boxes, workshops, water pumps, etc. • Capacitor start, 1,725 RPM

A&D

A B C D E

Volts

Full Load Amps

1/2 1/2 3/4 1 5

115/230 115 115/208 to 230 115/230 208 to 230

8.8/4.25 8.2 11.0/5.5 to 5.6 13.6/6.8 23 to 21

Shaft Overload Wt. Size Protection (lbs.) 5/8" manual 18.2 5/8" manual 18.2 5/8" manual 25.0 5/8" none 37.3 1-1/8" none 81.8

ITEM

PRICE

8122988 0750152 0750154 8122996 0750074

109.99 129.99 169.99 149.99 399.99

COMPRESSOR DUTY

F G I • Suitable for any application where 3,400 RPM is required • Manual reset overload Size HP Volts Full Load Amps RPM Shaft 115/230 14.8/7.4 3,450 5/8" F 1.5 2 115 / 208 to 230 19.2/10.5 to 9.6 3,450 5/8" G 3 230 14.0 3,450 5/8" 208 to 230 20.0 3,450 5/8" H 5 5 208 to 230 20.5 1,800 I

Frame Wt. Size (lbs.) 56 26.0 56 29.1 56 33.1 56H 55.0 184T 115.0

ITEM

PRICE

0750161 0750366 0750101 0750164 8189482

169.99 199.99 209.99 299.99 369.99

FARM DUTY All these farm duty motors feature: • 1,800 RPM • Totally enclosed & fan cooled • Manual overload • Reversible • Ball bearing, continuous duty • 1.15 service factor • Minimum 300% starting torque

FARM DUTY/INDUSTRIAL MOTORS HP Volts Full Load Amps 1/2 115 / 208-230 8.0 / 4.0-4.0 11.0 / 5.4-5.4 J 3/4 115 / 208-230 1 115 / 208-230 13.4 / 6.8-6.7 15.2 / 8.2-7.6 K 1-1/2 115 / 208-230

J K

Shaft 5/8" 5/8" 5/8" 5/8"

Frame Size Wt. (lbs.) 56 24.1 56 28.7 56 30.9 56H 41.0

ITEM PRICE 0750000 139.99 0750018 169.99 0750026 184.99 0750034 229.99

115V FURNACE FAN MOTORS

• 1,725 RPM • Ball bearing, continuous duty • Reversible • Totally enclosed, fan cooled • Manual overload HP Full Load Amps Wt. @ 115V / 230V (lbs.) ITEM 1/2 8.8 / 4.4 27.4 8123044 1 13.6 / 6.8 52.0 8123051 1.5 15.2 / 7.6 56.9 8123069 2 20 / 10 49.0 8123002

• 1,725 RPM single speed • Sleeve bearings, ball bearing • Reversible, continuous duty, thermally protected, open drip-proof • Mounts on resilient base or with 1" through bolts • Features gasket terminal cover, shaft slinger and zinc plated corrosive resistant hardware for use in poultry house/barn applications NOTE: These motors must be used in a fan application to ensure the motor is sufficiently cooled. HP Amps Wt. (lbs.) ITEM PRICE 1/4 5.0 13.0 0753699 79.99 1/3 6.1 14.7 0752741 84.99 1/2 7.2 18.8 0755868 119.99

PRICE 119.99 149.99 199.99 219.99

ELECTRIC MOTORS

FARM DUTY ELECTRIC MOTORS

C-FACE MOTOR • Features: ball bearings, 60 Hz • Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor Volts Full Load Amps RPM Shaft Frame Wt. ITEM PRICE HP Size (lbs.) 5 208 / 230 22 3,540 3/4" 56C 47.8 8001867 319.99

REVERSING SWITCHES

• Rated up to 1 HP, 110/220V, single phase • For starting, stopping and reversing electric motors on tools, hoists, conveyors, etc. A) SWITCH TYPE • 15 amp • Steel housing with enamel 8000790 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) LEVER TYPE • Pure copper forged contacts • Heavy copper drum segments • Lever can be set to momentary or to lock 8078693 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2299

5499

6 DIGIT MACHINE COUNTER • Steel housing construction • 0 to 999,999 0700395 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRICAL CORDS & OUTLETS

WALL TAPS

TRIPLE OUTLET TAP

• Built-in led indicates power in the adapter • 120 VAC, 15 amp • Safely converts 1 outlet into 3 8091902 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

C) 3 OUTLET 8206153 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . D) 3 OUTLET WITH NIGHTLIGHT 8206179 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 E) 6 OUTLET WITH NIGHTLIGHT 8206161 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199 249 299

OUTLETS/ELECTRIC MOTORS

RV ADAPTERS A) 30 TO 15 AMP ADAPTER • Provides convenient reduction of RV 30 amp service where only 15 amp park service is available • For use with 125 volt 30 amp equipped RVs • Adapter limited to 15 amps 99 8213688 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

B) 15 TO 30 AMP ADAPTER • Heavy duty 15 to 30 amp adapter (reverse) • Adapts 15 amp cords to 30 amp outlets • For use with 125 volt 30 amp equipped RV's • Adapter limited to 30 amps 99 8213696 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

POWER BARS

C D

C) 12 OUTLET POWER BAR WITH CLAMP • 12 outlet, 6 ft. cord • Heavy duty clamp for secure positioning • Lighted on/off switch 99 8005783 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . D) & E) POWER BLOCKS with CORD WINDERS • Metal housing • Built-in cord management • 6 ft. cord • Lighted on/off switch E) 6 OUTLET 2 transformer spaced outlets. 99 8057283 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . E) 8 OUTLET 3 transformer spaced outlets. 99 8057318 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . .

OUTDOOR EXTENSION CORDS

POWER BAR

• Triple outlet • 16/3 SJTW cord • For all year/all weather use • Temp. rating: -40° to 60°C Length Wt. (lbs.) ITEM PRICE 3 m (10 ft.) 0.9 8037699 6.49 10 m (33 ft.) 2.6 8037707 16.99 15 m (50 ft.) 3.9 8037715 21.99

• 15A circuit breaker, 120 VAC • 3-prong grounded • 2-1/2 ft. cord 8206617 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CORD LOCK

• Integrated 15 amp circuit breaker • 125V, 15 amp • 3 line surge protector • 450 joules • 2 ft. cord • STTW 14 AWG x 3C 8206625 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

• Works with 16 and 14 gauge cords • Durable plastic construction for heavy duty use • Does not put a strain on the plug 99 8091944 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

GENERATOR EXTENSION CORD

• 50 ft. • 10/3 gauge, SJTW cord • Remains flexible in cold temperatures down to -40°C (-40°F) • 125V, 20A twist lock male end • 125V, 15A triple female end • Lighted end 99 8212052 – Wt. 12.9 lbs. . . . . . . . . . . . . . . . . . .

499

POWER BAR

799

3 FT EXTENSION CORDS • Triple plug inlet • High gloss SJTW cord remains flexible in cold temperatures • Plug end glows when cord has power • Heavy duty, clear moulded plug & outlet 14/3 WIRE 8068819 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . 12/3 WIRE 8068835 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 999

• Lit ends • Flexible to -40°C/°F • SJTOW cord • Ideal for block heaters Length 3m 3m 10 m 15 m

Gauge 14/3 12/3 14/3 14/3

Plug Triple Triple Triple Single

Wt. (lbs.) 1.3 1.7 3.1 3.0

RV EXTENSION CORD with PULL HANDLE

Item 8093767 8093791 8093775 8214280

Price 12.99 19.99 29.99 24.99

LOCKING EXTENSION CORDS

• 30 amp 12 volt • 10/3 gauge STW cord • Lighted end 25 FT. 8193799 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . . 50 FT. 8193245 – Wt. 13.9 lbs. . . . . . . . . . . . . . . . . . .

54 89

• 14/3 gauge cord • Locking mechanism prevents unwanted disconnects • Locking connector adds additional strength with a nylon arm • Single end 99 15 M 8079204 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . 99 30 M 8079220 – Wt. 9.3 lbs. . . . . . . . . . . . . . . . . . . .

3799 5499

EXTENSION CORDS • High gloss SJTW cord • Plug end glows when cord has power • Heavy duty, clear moulded plug and outlet • Temp rating -40° to 60°C Length Plug Wire Single 14/3 8m Triple 12/3 (25 ft.) Single 14/3 15 m Single 12/3 (50 ft.) Triple 12/3 Single 14/3 30 m Triple 12/3 (100 ft.)

30A

TWISTLOCK

1-15R

L1-15R

STRAIGHT BLADE

TWISTLOCK

STRAIGHT BLADE

2-20R

L2-20R

2-30R

TWISTLOCK

125V

STRAIGHT BLADE

PRICE 19.99 27.99 32.99 38.99 49.99 59.99 89.99

125V 5-15R

L5-15R

5-20R

L5-20R

5-30R

L5-30R

6-15R

L6-15R

6-20R

L6-20R

6-30R

L6-30R

14-20R

L14-20R

14-30R

L14-30R

250V 125/250V

2 POLE – 3 WIRE GROUNDING 2 POLE – 4 WIRE GROUNDING

20A

15A

2-15R

Notes:

ITEM 8036295 8035677 8036303 8035701 8035685 8035669 8035693

250V

2 POLE – 2 WIRE NO GROUND

TYPE

CURRENT RATING

Wt. (lbs.) 2.4 3.8 4.6 6.9 6.8 8.8 13.0

ELECTRICAL CORDS & OUTLETS

EXTENSION CORDS

1) Female receptacles shown. For male plug change suffix from "R" to "P" and mirror image 2) For female connectors change suffix from "R" to "C" 3) Normally G = ground (green), W = neutral (white), X & Y = hot (red & black)

POWER PRO™ CONTRACTOR GRADE POWER CORDS

D B

C SINGLE

• Will not absorb oil, become brittle, or swell • Flexible in all temperatures • Resists common farm and industrial chemicals • Temp rating -40° to 60°C Wt. Plug Wire (lbs.) ITEM PRICE

TECH TIPS Recommended wire gauge and length for various amp ratings at 125 volts. Appliance Amps Rating 7 10 13 15 20

REQUIRED CORD GAUGE

Up to 50 ft. 18 18 16 14 12

Length C

8m A (25 ft.) Triple 14/3 2.8 8058265 21.99 15 m (50 ft.) Single 12/3 6.9 8058299 49.99 B 30 m (100 ft.) Single 12/3 12.3 8058307 89.99

Over 50 ft. 18 16 14 12 10

125 to 250 V, 30 AMP PLUGS

Length

• 3-wire cord features E exclusive high gloss SJTW super flexible wire • Power Lite™ indicator plug glows when cord has power • Extra heavy, clear moulded plug • More flexible at any temperature than standard vinyl compounds • Full lifetime guarantee

TRIPLE

ELECTRICAL CORDS & OUTLETS

INDUSTRIAL EXTENSION CORDS

8 m (25 ft.) 8 m (25 ft.) 15 m (50 ft.) 30 m (100 ft.)

Wt. Wire (lbs.) 14/3 2.4 14/3 3.0 12/3 7.3 12/3 13.3

ITEM PRICE 0708438 0708404 0708412 0708420

29.99 34.99 69.99 119.99

E) CORD CADDY • Heavy duty 12/3, 65 ft. cord • SJTOW grade is oil and chemical resistant • 3 outlet lighted end • Impact resistant housing on reel 8028760 – Wt. 12.8 lbs. . . . . . . . . . . . . . . . .

10999

125V FLAT BLADE CONNECTORS

F H X

G W

• 30A 3 pole, 4-wire grounding - 115/250 volt • Neoprene gasket seals cord hole from dust and debris • Back wire terminal clamps for secure wiring • Locking plug end for secure connection • Can be used for 10,000 watt generator cord MALE PLUG 99 8005780 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . FEMALE SOCKET 99 8005774 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

32 39

• High visibility yellow thermoplastic body • Snaps open for easy wiring • Rated at 15 amps Wt. 0.1 lbs.

F) PLASTIC G) RUBBER H) SNAP OPEN

Type Male Female Male Female Male Female

ITEM PRICE 0704353 2.79 0704361 3.59 0700146 2.79 0700138 3.89 8019930 5.49 8020045 9.99

RECEPTACLES, CONNECTORS & PLUGS

C D E A) AC RECEPTACLE TESTER 110-125V AC circuit. 8003373 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) GFI RECEPTACLE TESTER 110-125V. 8003374 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599 X

799

Y G

20 AMP MALE PLUG

Volts Amps Wt. (lbs.) 15 0.1 C 250 15 0.2 D 250 15 0.1 E 250 • 4 prong 30 0.2 F * 125 • Neoprene gasket seals cord hole from dust and 30 0.2 debris G * 250 99 8213605 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . *Locking connector

OUTDOOR TIMERS

ITEM PRICE 0706002 6.49 0706044 8.99 0706036 6.99 0704502 18.99 0704528 21.99

SWITCHES

ELECTRICAL CORDS & OUTLETS

RECEPTACLE TESTERS

K I

• Dustproof • SPST • 16A @ 125 VAC, 10A @ 250 VAC K) ROCKER SWITCH 0700285 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . L) TOGGLE SWITCH 0700284 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

159 399

• 24 hour cycle • Ideal for outdoor lighting, sprinklers, garden accessories, blockheaters H) DUAL LOCKING OUTLETS TERMINAL • 2-8 hour settings or manual on/off • Max. 1,800 watts BLOCKS • Dusk to dawn settings 99 8180150 –Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . I) HEAVY DUTY CONSTRUCTION • Multiple on/off settings • 10 sections • Max. 1,875 watts 99 • Sections can be separated to form blocks with 8180143 –Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . different number of sections and different J) WITH REMOTE CONTROL amperage • 2-8 hour settings Amps Pitch ITEM PRICE • Max. 1,800 watts 10 9.1 mm 0700337 3.49 • Dusk to dawn settings 20 11.6 mm 0700338 4.99 • Dual outlets 99 30 13.2 mm 0700339 5.49 8180168 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

16 19

ELECTRICAL SWITCHES • Rated 6A @ 125V, 3A @ 300V • Fits into 7/8" mounting hole

M N O P

Style Momentary Push Momentary Push Emergency Stop 2-Position Select 3-Position Select Direct Type

M N P O Head Type Type of Contact Wt. (lbs.) ITEM PRICE Standard N.O. 0.1 0700318 3.49 Standard N.O. or N.C. 0.1 0700320 4.49 Push Lock N.O. or N.C. 0.1 0700322 7.49 Knob N.O. 0.1 0700323 4.49 Knob N.O. 0.1 0700324 5.49 Green Illuminated N.O. or N.C. 0.1 0700327 6.49

YARD, SPOT & SHOP LIGHTS

SWITCH MOUNTING BOXES

WEATHER BOX with COVER

• 2-piece plastic box • 7/8" mounting hole • Seals out moisture, sheds water, ice and snow • Movable hinges for easy mounting either horizontally or vertically • For use with 12-gauge or lighter cords 99 8036550 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

Holes Size 1 3" x 3" x 2-1/4" 2 3" x 4-1/2" x 2-1/2"

ITEM PRICE 0700332 5.49 0700333 6.49

ELECTRICAL TAPE

MAGIC WRAP TAPE

Vinyl tape 3/4" wide x 60 ft. long. Wt. 0.2 lbs. • Bonds to itself forming a Colour ITEM solid rubber wrap that is 0701003 air and water tight to 100 PSI BLACK • 1" x 8 ft. roll stretches to 3 times initial length 0700257 WHITE • Ideal for plumbing, automotive, electricall 0700258 YELLOW 99 0700353 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 0700259 GREEN 0700261 RED

PILOT LAMPS

PRICE 0.79 0.99 0.99 0.99 0.99

• AC 110V • Rounded top, flat base • Mounting hole: 22 mm (7/8") • Neon bulb • CSA approved Wt. 0.1 lbs. 8219677 – RED 0700404 – AMBER 0700405 – CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

YARD, SPOT & SHOP LIGHTS SECURITY LIGHTS

• Energy efficient high pressure sodium lights • Higher initial cost is offset by low power consumption and much longer life • 70 watt high pressure sodium gives as much light as a 175 watt mercury vapor light; a 150 watt HPS equals a 250 watt mercury vapor 70 WATT/115V HIGH PRESSURE SODIUM LIGHT • Photo-electric eye included • 9" housing dia. 99 0701367 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . REPLACEMENT 70W BULB 115 volt with medium base. 0700849 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . 24.99 150 WATT/115V HIGH PRESSURE SODIUM LIGHT • Photo-electric eye included • 1-5/8" x 18" mounting arm • 12" housing dia. 99 0701375 – Wt. 11.8 lbs. . . . . . . . . . . . . . . . . . . REPLACEMENT 150W BULB 115 volt with medium base. 0700856 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . 24.99

REPLACEMENT PHOTO-ELECTRIC CONTROL For 0701367, 700187, and 0701375. 0702738 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . 15.99 175 WATT/115V MERCURY VAPOR LIGHT • Precision die-cast aluminum housing • Mounting arm extends 5" from housing • Replaceable twist lock automatic dusk to dawn operation photo control included • 16-1/2" high • Housing dia.: 13-1/2" • 175 watt bulb included 99 0700187 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . REPLACEMENT 175 WATT/115 VOLT BULB 0700633 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . 14.99

• Two 500 watt halogen lamps • Individual switches • Lamp heads are fully adjustable by 360° horizontally and 150° vertically • Telescoping stand with adjustable tripod base extends from 3-1/4 ft. to 6-1/2 ft. • Powder-coat finish • 6 ft. power cord 99 8161903 – Wt. 11.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RETRACTABLE TROUBLE LIGHTS

C B

• Galvanized metal lamp shield • 2 hanging hooks • Grounded outlet in handle A) 30 FT • 16/3 type SJTW wire • Metal case 8003820 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . B) FLUORESCENT TROUBLE LIGHT • 12 m (40 ft), 18/3 SJT cord • Metal case • 13 watt fluorescent light • Grounded outlet in handle 8003824 – Wt. 9.6 lbs. . . . . . . . . . . . . . . . . . . .

4999

C) LED WORK LIGHT WITH 50 FT REEL • 50 ft. cord with retractable reel • 115 V, 18/2 SVT wire • Durable plastic case housing with bracket • 60 bulb LED light provides over 80,000 hours of bulb life 99 99 8087256 – Wt. 11.8 lbs. . . . . . . . . . . . . . . . . . .

FLUORESCENT TROUBLE LIGHT

• 26-1/2 ft. SJTW cord stays flexible to -50°C (-58°F) • Wall mount bracket • Grounded outlet in handle • 120 volt 99 8003828 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . .

TECH TIPS

YARD, SPOT & SHOP LIGHTS

1,000 WATT FLOOD LIGHT

128 LED CORDLESS UNDERHOOD WORK LIGHT

• Extends from 52" to 85" • Battery: 7.2V 2,000 mAh Ni-MH • Battery indicators: red/green/blue • Run time: 4 to 4.5 hours • Charge time: 4.5 to 5 hours • 100 to 240V A/C adaptor charger • 12 VDC cigarette lighter adaptor 8194318 – Wt. 7.1 lbs. . . . . . . . . . . . . .

11999

FLUORESCENT WORK LIGHT

13 watt fluorescent lights provides as much light as a 75 watt bulb.

13 W REPLACEMENT BULB

8057234 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

499

• 1,625 watt, 13 amp, 125V • Adjustable front and rear hanging hooks • 2 adjustable mounting stands included • Grounded outlet, ballast and on/off switch built into handle • 25 ft. cord • O’all dim.: 28"L x 3"W x 3"H 99 8007077 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . .

YARD, SPOT & SHOP LIGHTS

LED WORK LIGHT • 78 LEDs for 80,000 hours of operation • Swivel hanging hook • 15 ft. cord • Magnetic holder • 120V, 60 Hz 8106023 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . .

TROUBLE LIGHTS

TROUBLE LIGHT REPLACEMENT BULBS

• 16/3 type SJT cord • Metal cage and reflector • Grounded plug in handle Length 25 ft. 50 ft.

Wt. (lbs.) 2.5 4.5

4999

ITEM 8003829 8003832

PRICE 16.99 34.99

12 VOLT ROUGH SERVICE 0700019 – 25 watts 0700020 – 50 watts . . . . . . . . . . . . . . . . . . . . . . 110 VOLT ROUGH SERVICE 0704866 – 50 watts 0700018 – 100 watts . . . . . . . . . . . . . . . . . . . . .

129 119

STRING LIGHT • Cord type: SJTW14/3C • Voltage: 125V • Cable length: 50 ft. with 5 plastic cages • Max. power for each bulb: 150W • Light bulbs not included 8196628 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . . . . . .

8999

FANS VENTILATING FANS • Ideal for barns, shops, garages, and greenhouses • Provides moisture and temperature control and continuous ventilation • MOTOR: totally enclosed, ball bearing with thermal overload protection • FAN BLADE: heavy gauge galvanized steel, well balanced • HOUSING BOX: rugged steel welded construction with enamel finish • MOTOR MOUNT: heavy welded steel rod • SHUTTER: aluminum louvers supported by long life nylon bearings SINGLE SPEED Blade Dia. 12" 16" 18" 20" 24"

HP Free Air CFM 1/4 1,640 1/4 2,370 1/3 3,200 1/3 3,420 1/3 4,255

Opening Shipping Needed Wt. (lbs.) 15" x 15" 26.1 19" x 19" 31.2 21" x 21" 37.3 23" x 23" 41.3 27" x 27" 45.7

ITEM

PRICE

0772301 0772202 0772343 0772210 0772541

209.99 229.99 234.99 269.99 299.99

Princess Auto is proud to offer an extensive assortment of products that carry our in-house brand – POWERFIST. We select products that combine the best balance between quality and price. Powerfist products are backed by our Royal Service Promise...

No sale is final until you're satisfied.

FANS

2-SPEED SWITCH

• For use with 8", 10", and 18" 2-speed fans • SPDT 0772632 – Wt. 0.2 lbs. . . . . . . . .

2-SPEED Blade Dia. 8" 10" 18"

Free Air CFM 1/20 360/300 1/20 690/580 1/3 3,200/2,100 HP

1799

Opening Shipping Needed Wt. (lbs.) ITEM PRICE 11" x 11" 11.4 0771253 139.99 13" x 13" 13.2 0772384 149.99 21" x 21" 36.4 0772657 319.99

18" EXPLOSION PROOF BARN FAN

SINGLE STAGE THERMOSTAT • Single stage, 30-110°F, 120V/16 A • Moisture proof box • Convenient flip open cover • Stainless steel coil and flip open hanger • Can be used with ceiling and barn fans 8092041 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . .

4999

• 1/3" HP motor • 3,200 CFM • Totally enclosed ball-bearing motor with thermal overload protection • Heavy guage aluminum fan blades • Ideal for paint booths 8051742 – Wt. 70.0 lbs. . . . . . . . . . . . . . .

10" UTILITY FAN WITH SWITCH • Grey and black finish • Single speed, 350 CFM • 14" chrome on/off 99 pull chain • Easy installation, can be hard-wired • 10 ft. cord, plugs into 120V outlet • Can be used for work shop or garage ventilation 8092025 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . .

569

AUTOMATIC SHUTTERS

4999

FAN BLADES • Aluminum construction • Ideal for use in shops, barns, greenhouses, garages, sheds • Gravity closes shutters when fan is stopped • Automatically opens when fan starts Fan Size 10" 12" 16" 20"

Wt. Shutters Frame (lbs.) 10" x 10" 13" 2.0 12" x 12" 15" 2.6 16" x 16" 19" 3.8 20" x 20" 23" 6.5

ITEM PRICE 8094559 8094567 8094575 8094591

44.99 49.99 69.99 79.99

• Aluminum blades • Steel spider and hubs, cadmium plated, socket setscrews • Clockwise rotation Dia. Blades Bore Wt. (lbs.) 8" 5 5/16" 0.6 10" 5 5/16" 0.2 16" 3 1/2" 1.1 18" 3 1/2" 2.1

ITEM 0770035 0770036 0770271 0770289

PRICE 9.99 11.99 23.99 27.99

HEATING & VENT FANS SAVE ON FUEL! • Improves performance of forced air heating or cooling system • Use as an exhaust fan in restaurants, poultry houses, attics, etc. mounted in a section of pipe as shown • 120 VAC Size Speed 4" 5" 6" 6" 8" 10" 12"

1 1 1 2 1 1 1

Max. Wt. CFM (lbs.) ITEM PRICE 80 CFM 2.5 0770134 39.99 225 CFM 1.7 0770145 39.99 250 CFM 2.4 0772871 41.99 300 CFM 2.1 0770071 47.99 500 CFM 3.2 0772889 49.99 650 CFM 4.5 0772897 59.99 800 CFM 5.6 0772905 64.99

FANS

ADJUSTABLE DUCT BOOSTER FAN • Fits 6" to 8" pipe • Comes with 2 blades • 120 VAC 40 watt • 150 CFM free air flow 0772822 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999

INDUSTRIAL DUTY CEILING FAN These fans are designed for both winter and summer use. IN WINTER Warm air rising from your heating system is pushed down, reducing heating costs. IN SUMMER • The fan creates air movement which cools the room • Fan is aerodynamically designed to achieve max. air delivery while consuming very little power • Totally enclosed motor to ensure long life and quiet operation • All metal construction finished in white baked Operates forward or reverse enamel Blade Dia. Down Rod CFM Coverage RPM Amps Shp. Wt. (lbs.) ITEM PRICE 36" 12" 7,100 600 sq. ft. 380 0.7 11.4 0771113 49.99 56" 10" 20,500 1,200-1,500 sq. ft. 310 0.95 16.3 0771733 54.99 RHEOSTAT SPEED CONTROLS – Wt. 0.3 lbs. 0771444 – REGULATES 1 FAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.99 0770149 – REGULATES UP TO 4 FANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.99

HIGH VELOCITY DRUM FANS

• Ideal for shops, assembly lines, patios, porches or anywhere air movement is required • 6" rubber wheels 30" FAN • 1/2 HP, 3.0 amp motor • 1,100 RPM • 7,700 CFM 99 8105041 – Wt. 52.0 lbs. . . . . . . . . . . . . . . . . 42" FAN • 1 HP, 5.8 amp motor • 750 RPM • 16,000 CFM 99 8105058 – Wt. 82.0 lbs. . . . . . . . . . . . . . . . .

249 399

How do you know what fan is right for you? To determine the proper fan for your Number of cubic feet in room application, use the following formula: Number of minutes per air change = Required CFM capacity

Application

Assembly Hall Auditorium Bakery Barber Shop Basement Bathroom Battery Room Bedroom Boiler Room Bowling Alley Church Classroom Cocktail Bar Corridor Dairy

Minutes per Air Change 7 10 3 6 8 3 4 4 1 5 15 5 3 10 4

Application

Minutes per Air Change Department Store 6 Dry Cleaning 5 Engine Room 6 Forge Room 3 Foundry 4 Garage 5 General Office 10 Gymnasium 8 Hospital 8 Hotel Room 3 Kitchen 2 Laundry 2 Lobby 8 Locker Room 3

Application

Minutes per Air Change Machine Shop 8 Meeting Room 2 Pressing Room 1 Private Office 3 Projection Booth 2 Restaurant 6 School 7 Store 8 Summer Cooling 1 Tavern 3 Theater 5 Toilet 3 Transformer Room 1 Warehouse 12

• Designed for use with duct fans for winter heating or summer cooling applications • Mounts between duct fan and register • Adjustable temperature: 7°C to 43°C • Duct fan plugs into thermostat and thermostat is plugged into a 110 volt grounded household outlet (5 amp rating) • 6 ft. cord 99 0770061 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GAS ENGINES Honda 4-cycle overhead valve gas engines feature: • Sure and easy starting • High fuel economy • Tough durability • Cast iron cylinder sleeves • Easy maintenance, compact, simple to mount • Steady high power • Low noise and vibration HP @ 3,600 RPM GX 160 K1 QH 5.5 GX 270 QH 9.0 GX 390 KI QA* 13.0 * with oil guard Model

FANS/GAS ENGINES

PLUG-IN THERMOSTAT

Fuel Tank Shaft O’all dim.: Wt. (lbs.) ITEM PRICE Capacity Size (L x W x H) 0.79 gals. 3/4" 12.48" x 14.48" x 13.40" 37.0 4770426 479.99 1.32 gals. 1" 15.20" x 17.20" x 16.40" 61.0 4770459 769.99 1.71 gals. 1" 15.94" x 17.72" x 17.44" 78.0 4770558 949.99

5 HP GC ENGINE • For use on lawnmowers, tillers and other home or light duty equipment • Overhead cam engine • Easy maintenance • Low noise • Built-in timing belt • Idle: 1,700 RPM • Full throttle: 3,600 RPM • 3/4" shaft 4770044 – Wt. 26.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

29999

6 HP GC ENGINE • For use on lawnmowers, tillers and other home or light duty equipment • Overhead cam engine • Easy maintenance • Low noise • Built-in timing belt • Idle: 1,700 RPM • Full throttle: 3,600 RPM • 3/4" shaft 8091142 – Wt. 28.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

35999

INDUSTRIAL 20 HP V-TWIN ENGINE • Efficient, reliable OHV V-Twin design • 12 volt electric starter with key operated switch • 20 amp charging system • Overhead muffler is up out of the way of any attachments • Fuel consumption 8.1 oz./HP/hr. • Quiet and easy starting • 1" straight shaft • Spin-on type oil filter • Pressure lubricated • O’all dim.: 15.20" x 17.93" x 17.78" 99 4770001 – Wt. 112.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

1949

GAS ENGINES

2 CYCLE SMOKELESS OIL

10 HP DIESEL ENGINE

• 10 HP @ 3,600 RPM • Air cooled 4 stroke • 5.5 litre fuel tank (1.5 gallon) • 1" keyed shaft • For commercial, agricultural, and industrial use • Electric start 8164188 – Wt. 110.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LUBRICANTS

• Environmentally friendly • Reduces cyclinder deposits, ring coating, exhaust port clogging, piston scuffing, plug fouling, and rust and corrosion • Formulated for snowblowers, lawnmowers, string trimmers and chainsaws also is good for motorcycles 99 99 8181810 – Wt. 0.5 lbs. . . . . . .

899

SORRY, OILS & LUBRICANTS CANNOT BE SHIPPED.

SAE 10W30 1 litre container. 79 8003024 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . B) MULTI-GEAR 80W90 • Recommended for limited slip differentials • For hypoid axles, gear and steering boxes of cars and trucks • 1 litre container 79 8003027 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . A B C D C) SAE 30 • Recommended for 4-stroke lawn mowers and A) MOTOR OIL gas powered engines where single grades are • For gasoline fueled cars and light duty trucks specified • Makes cold starting easier • 1 litre container 99 8003010 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . SAE 5W30 SD 1 litre container. 99 D) ALL SEASON CHAIN OIL 8003025 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . • Prolongs the life of your chain, bar and sprockets • Designed for year round use SAE 10W30 SD • 1 litre container 4 litre container. 99 99 8003023 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . 8003014 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . .

SMALL ENGINE MUFFLERS

AIR FILTERS

E G

E) CYLINDER TYPE ENGINE MUFFLER • Briggs & Stratton 2-4HP "Sausage" style with 1/2" pipe • For horizontal engines • Replaces B&S 89966 29 8197741 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . F) PANCAKE TYPE ENGINE MUFFLER • Briggs & Stratton 2 to 4HP with 1/2" pipe • Used on vertical lawnmowers, as well as on Clinton and Tecumseh models • Replaces B & S 298830 99 8197733 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . G) LARGE ENGINE MUFFLER • Fits 8 HP and up, B&S, Kohler, Tecumseh-Lauson, and Wisconsin engines with 1" exhaust pipe • Replaces Kohler O.E.M. #275679 99 8197725 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . H) LARGE CYLINDER TYPE ENGINE MUFFLER • Fits B&S 5-8HP engines with 3/4" pipe horizontal engines • Zinc plated 99 8197758 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

L I) 5.5 TO 6.5 HP HONDA AIR FILTER Replaces Honda # 17210-ZE1-821. 8047706 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . J) 5.5 TO 6.5 HP HONDA AIR FILTER Replaces Honda # 17210-ZEO-822. 8047649 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . K) 9 HP HONDA AIR FILTER Replaces Honda # 17210_ZE2-822. 8047672 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . L) 11 TO 13 HP AIR FILTER Replaces Honda # 17210-ZE3-010. 8047656 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

899

1299 1299 1699

ENGINE REPAIR BOOKS

FOR BRIGGS & STRATTON • Fits models 92,900 and up with vertical shaft; most 3 and 3-1/2 HP engines • Replaces Briggs & Stratton O.E.M. #270579 4780011 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

449

TECHBOOK SERIES

ENGINE COVER • Covers maintenance, troubleshooting and repair procedures on engines up to 5 HP • Includes Briggs & Stratton, Honda, Sears Craftsman, and Tecumseh 99 4490587 – Wt. 1.0 lbs. . . . . . . . . . • Covers trouble shooting, repair, and maintenance on engines from 5.5 HP to 20 HP • Includes Briggs & Stratton, Tecumseh/Craftsman, Honda, and Robin 99 4490063 – Wt. 1.4 lbs. . . . . . . . . .

GAS ENGINES

AIR FILTER

• Fits most standard grain auger motors, logsplitters, etc. • Heavy 1/4" rope drawstring holds cover secure • Silver exterior reflects heat and sunlight • O’all dim.: 23" x 19" x 24" high 99 2480016 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

SPARK PLUG

SPARK PLUGS

Standard spark plug for 2 HP-16 HP 4-cycle engines. 8145302 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

299

SMALL ENGINE MUFFLERS

• Standard size spark plug • Size: 14 mm, 3/8" reach, 13/16" hex • Replaces: Champion J17LM, J8, AC LM46, Autolite A-7 • Most commonly found on 2 to 16 HP 4-cycle Briggs & Stratton gas engines 99 4780227 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . • “Shorty” size spark plug • Sizes: 14 mm, 3/8" reach, 3/4" hex • Replaces: Champion CJ-8, RCJ, Fram (Autolite) 245, Fram (Canada) 3345; Motorcraft AR7N, Bosch W58E • Most commonly found on 2 to 16 HP 4-cycle gas engines 99 4780235 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . • Sizes: 14 mm, 3/8" reach, 3/4" hex • Replaces: Champion JI9LM • Most commonly found on newer 2 to 16 HP 4-cycle gas engines 99 4780111 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . • Sizes: 14 mm, 3/8" reach, 3/4" hex • Replaces: NGR BPR6ES • Most commonly found on 4 to 25 HP Honda gas engines 99 4780112 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

For Briggs & Stratton and Tecumseh engines. A) 4-7 HP 97 8145252 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . B) 7-10 HP 97 8145260 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . C) 8-12 HP 97 8145286 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . .

9 11 24

GAS CAP 8145310 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

499

PRIMER BUTTON

8145328 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

TECH TIPS

STARTER HANDLE

1299

8145294 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

699

Proper lubrication ensures long engine life. Change your oil every 50 to 100 hours, depending on working environment (i.e. dust, high heat, etc.) to keep your engine running at optimum efficiency.

GAS ENGINES

SKID PLATES

SCRAPER BAR A

• Fits Airens 24599 and all Airens blowers from 1960's to present • Also fits John Deer/Bloens/MTD/Simplicity • Ariens models 924800 and 924082 with 24" auger 99 8194581 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . .

A) 3-HOLE • Fits torso and wheel horse models S200 and 620 • Toro # 23-3170 8194623 – Wt. 0.5 lbs. . . . . . . . . . . . . . . .

• Old style slide shoe • Fits most large 2-stage throwers prior to 1998 and small frame 2-stage snow throwers prior to 1992 • Replaces MTD #05571 99 8194599 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . .

B) 4-HOLE • Mtd 2 cycle single stage snowthrowers • Models snow Wolf 191/174/180/181/196 • Snow throwers made since 1988 • Replaces Mtd # 731-1033 99 8194631 – Wt. 0.5 lbs. . . . . . . . . . . . . . . .

ASSORTED LAWN MOWER PARTS

E) SMALL ENGINE STARTER HANDLE & ROPE • Durable, long lasting starter handle with metal insert comes complete with 88" nylon starter rope • Fits most old and new style engines 49 4780383 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . F) UNIVERSAL LEVER-TYPE THROTTLE CONTROL • Lever-type model – all heavy metal lever and mounting bracket • Comes fully assembled with wire swivel, adjustable friction spring washer, 54" inner wire and conduit 99 4780250 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . G) UNIVERSAL THROTTLE CONTROL • Deluxe lever-type model – all heavy metal lever and mounting bracket • Control mounts between or on side of handle bar • 54" inner wire and conduit 99 4780268 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

TUNE-UP KITS

ELECTRONIC IGNITION I

ONE SIZE FITS ALL

FOR BRIGGS & STRATTON ENGINES H) TUNE-UP KIT FOR B&S • Fits most 2 to 5 HP B&S engines without solid state ignition • Replaces B&S contact point and condenser kit, O.E.M. #294628 • Kit includes: contact point, condenser, spark plug #01-574004 and flywheel key #01-535002 99 4780144 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . I) CARBURETOR TUNE-UP KIT FOR B&S • Kit includes complete diaphragm assembly • Replaces B&S O.E.M. #391681, #391643 • Fits late model 3-1/2 and 4 HP B&S engines with automatic choke carburators; series 92,000 and 110,000 99 4780334 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

• Permanently replace troublesome points and condensers on small engines with these sealed computer chips • Multiple firing of spark plugs results in longer spark duration • Gives dependable starts and smoother running engine • Easy installation on B&S, TecumsehLauson (except those with cast iron flywheels), Lawn-Boy, Honda, and others • Eliminates starter kickback 99 4780300 – Wt. 0.1 lbs. . . . . . . . . . . . . . . .

CENTRIFUGAL CLUTCHES 400 SERIES CENTRIFUGAL CLUTCHES ®

350 SERIES REBUILDABLE CLUTCHES

• Bi-directional operation • Up to 8 HP • 6 sintered metal shoes for the ultimate in proper weight, wear ability and heat dissipating qualities • Ease of installation • Operates under conditions that would destroy most clutches • More contact surface, no slipping when you need the power Wt. 2.5 lbs. # Of Chain Outside Bore Teeth ITEM PRICE Pitch Dia. 5/8" 12 #35 4" 4760005 49.99 3/4" 12 #35 4" 4760013 49.99 3/4" 10 #40/41 4" 4760021 49.99 1" 10 #40/41 4" 4760039 89.99

TORQ-A-VERTER KIT

• 3-1/2" Diameter • For 4-cycle gas engines and electric motors up to 6 HP or 2-cycle gas engines to 9 HP • “Variable cam” rotor action adjusts for gradual or abrupt engagement, allowing for better control of acceleration • Excellent for industrial, utility or go-cart applications • Engagement RPM: 1,800-2,000 RPM (red springs). • Optional Engagement Springs available by special order • Fits both A or B section V-belts Wt. 2.3 lbs.

DRIVELINE HARDWARE

Bore Pulley O.D. Keyway ITEM PRICE 3/4" 3" 3/16" 4760112 79.99 1" 3" 1/4" 4760120 79.99

DISC & CALIPER BRAKE ASSEMBLY

• For drive applications • Fits most gas engines • Bolts directly to motor in minutes, no welding required • No misalignment or adjusting of bolt centres • Has a 19 to 1 low ratio and a 5-to-1 high speed ratio • Comes complete with driver and driven pulley, belt, all mounting hardware, and belt guard FOR 3/4" SHAFT GAS ENGINES 35 pitch, 12 tooth driver. 99 4760195 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . REPLACEMENT BELT 4780070 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . 29.99

279

14 31 72

CHAIN PULLER

SPEED REDUCER with FLANGE MOUNT

• 60:1 • Type: WE, mode: 70 • Inlet: 5/8" hollow shaft, outlet: 1" dia. shaft • Suitable for 1/2 to 1 HP motor 8008416 – Wt. 31.0 lbs. . . . . . . . . . . . . . . .

• Caliper has a total of 8 different lever positions in either direction of pull (clockwise/counterclockwise) B for a total of 16 positions • Brake puck has 1.8 square inches of automotive brake material and is replaceable • Use on RVs, snowmobiles, go-carts, mini bikes, garden tractors and numerous industrial applications A) DISC CALIPER MOUNTING BRACKET For brake assembly. 99 4760002 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . B) 6-3/8" DIA DISC • With 1" bore hub • 1/4" thick disk 99 4760179 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . C) DISC CALIPER 99 4760161 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . .

17999

• Steel construction with black finish and chrome plating • Aids in the installation of connecting links • Used to pull and hold the ends of roller chain. • Suitable for sizes: 428, 520, 525, 528, 530 and ANSI 40 & 50 series • Steel construction with black finish and chrome plating • Suitable for sizes: 428, 520, 525, 528, and 530 8105827 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

1399

DRIVELINE HARDWARE

WORM GEAR SPEED REDUCERS

CHAIN LUBE

• Formulated to lubricate and protect all types of roller chains operating in exposed conditions • 330 g aerosol can • Cannot be shipped 49 6440016 – Wt. 1.0 lbs. . . . . . . . . . . . .

ROLLER CHAIN TOOLS These economical, high quality worm gear angle drives and speed reducers have hundreds of uses on the farm, at home, and in industry. • Quiet, efficient, fully enclosed, self-locking • Can be driven by belts, pulleys, and chains or direct driven • Rugged cast iron housing, precision machined gears and shafts running on ball bearings • Do not exceed max. input HP • Input shaft: 5/8" dia. • Output shaft: 1" dia. • O’all dim.: 9-1/2" x 9-1/2"x 8-1/2" • Max. 1,800 RPM Output Max. Ratio Max. (in.-lbs.) Input HP 60:1 1,000 3/4 100:1 1,200 1/2

Wt. (lbs.) ITEM PRICE 33.9 8139362 99.99 34.6 3840127 169.99

B Makes quick, easy work of roller chain disconnections. A) USE WITH #25 THROUGH #60 CHAIN 99 8039311 – Wt. 0.8 lbs. . . . . . . . . . . B) USE WITH #60 THROUGH #80 CHAIN 99 8039320 – Wt. 1.5 lbs. . . . . . . . . . .

24 44

SINGLE STRAND ROLLER CHAIN • Built to ANSI standards • Solid rollers, precision hardened • Pre-stretched, pre-loaded, pre-lubricated • Used by many OEM & industrial accounts • High strength, high speed, long wearing • Roller chain rolls include one connecting link

C CHAIN

(A) ROLLER CHAIN (10 ft. roll) Wt. PRICE ASA No. Pitch (lbs.) ITEM (per 10 ft.) 35 3/8" 2.4 3842101 13.49 40 1/2" 4.4 3842317 13.99 41 1/2" 2.9 3850476 12.99 50 5/8" 7.2 3842325 19.99 60 3/4" 10.9 3842333 23.99 60H* 3/4" 12.7 3842135 31.99 80 1" 17.5 3842341 47.99 * With extra heavy side plates

(B) CONNECTING LINK Wt. PRICE (lbs.) ITEM (2 pk.) 0.1 3840178 1.29 0.1 3840179 1.19 0.1 3840180 1.39 0.1 3840181 1.49 0.1 3840182 2.19 0.1 3840183 2.29 0.3 3840184 3.49

(C) OFFSET LINK Wt. PRICE (lbs.) ITEM (2 pk.) 0.1 3840171 1.79 0.1 3840172 1.99 0.1 3840173 2.29 0.1 3840174 2.49 0.1 3840175 3.49 0.2 3840176 3.79 0.3 3840177 5.49

Ernie Hancharek was an energetic man who liked to get the job done. He was a carpenter who built many counters for the stores, bookshelves and cabinets for the offices, and much more. When something needed to be built, Ernie was there to build it. Ernie later became Receiving Foreman of the Distribution Centre. Ernie passed away on March 10, 1994, but he will not be forgotten because he was an important part of Princess Auto.

WELD-ON HUBS

FOR DIRECT DRIVE APPLICATIONS • No lubrication needed • Easily assembled or disassembled • Spiders are easily inspected at any time • No wear on metal jaws • Comes with set screws • Make sure when ordering that body pieces and rubber spider are from the same series COMPLETE COUPLING CONSISTS OF 3 PIECES BODY – SPIDER – BODY Series Capacity @ 1,200 RPM Capacity @ 1,800 RPM Capacity @ 3,600 RPM Outside diameter O’all length (complete) Approx. wt. Bore size Keyway 1/2" 1/8" 9/16" 1/8" 5/8" 3/16" 3/4" 3/16" 7/8" 3/16" 1" 1/4" 1-1/8" 1/4" PRICE FOR 1 BODY SPIDER ONLY

L-095 L-099 3.60 HP 6.00 HP 5.40 HP 9.00 HP 10.8 HP 17.99 HP 2-7/64" 2-17/32" 2-1/2" 2-7/8" 0.6 lbs. 1.2 lbs. ITEM ITEM 3840550 3840675 – 3840568 3840576 3840691 3840592 3840717 3840618 3840733 3840634 3840758 – 3840766 99

3840659 4.99/ea.

3840774 7.99/ea.

SMALL FLEXIBLE COUPLINGS

• L050 series is designed for low horsepower applications • Outside dia.: 1-5/64" • Cap.: 0.49 HP @ 1,200 RPM, 0.74 HP @ 1,800 RPM, 1.47 HP @ 3,600 RPM • O’all length of 2 couplings with spider: 1-23/32" Bore 1/4" 5/16" 3/8" 1/2" 5/8" Spider only

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1

ITEM 3852019 3852035 3852027 3852191 3852043 3852050

PRICE 3.49/ea. 3.49/ea. 2.99/ea. 3.29/ea. 3.49/ea. 2.49/ea.

• Machined to eliminate special jigging • Simply clamp hub to sprocket or pulley and weld • Round bore with keyway and set screw V-SERIES HUBS – Pilot hole dia.: 1-1/8" Bore Wt. (lbs.) ITEM PRICE 1/2" 0.4 3845096 3.99 5/8" 0.3 3845104 3.99 3/4" 0.3 3845112 3.99 7/8" 0.3 3845120 3.99 W-SERIES HUBS – Pilot hole dia.: 1-5/8" Bore Wt. (lbs.) ITEM PRICE 1/2" 0.9 3845138 4.49 5/8" 0.8 3845153 4.49 3/4" 0.8 3845179 4.49 7/8" 0.7 3845195 4.49 1" 0.6 3845211 4.49 1-1/8" 0.6 3845237 4.49 1-1/4" 0.5 3845252 4.49 X-SERIES HUBS – Pilot hole Dia.: 2" Bore Wt. (lbs.) ITEM 5/8" 1.6 3845294 3/4" 1.6 3845310 7/8" 1.5 3845336 1" 1.4 3845351 1-1/8" 1.3 3845377 1-3/16" 1.3 3845385 1-1/4" 1.2 3845393 1-3/8" 1.0 3845419 1-7/16" 1.1 3845427 1-1/2" 1.0 3845435

PRICE 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49

W-SERIES SPLINED HUB DESIGNED TO FIT ON SPLINED SHAFTS.

• 7/8" x 13-spline • Pilot hole dia.: 1-1/16 3840469 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

WELD-ON PULLEYS

No sale is final until you’re satisfied!

DRIVELINE HARDWARE

FLEXIBLE COUPLINGS

• Fits W-series hubs • Hubs sold separately • Split Steel Pulleys • Fits W-series hubs • Hubs sold separately

Wt. O.D. (lbs.) 3-1/2" 0.3 4" 0.5 4-1/2" 0.6 5" 0.8 5-1/2" 1.0 6" 1.2 6-1/2" 1.4 7" 1.6 8" 2.1 9" 2.9 10" 3.4 12" 4.0 14" 4.7 16" 5.8

1399

ITEM PRICE 8033722 8033730 8033748 8033755 8033771 8033789 8033797 8033805 8033813 8033821 8033839 8033862 8033888 8033896

7.99 8.49 8.99 9.49 11.49 11.99 12.99 13.99 14.99 17.99 19.99 24.99 36.99 43.99

DRIVELINE HARDWARE

SINGLE GROOVE V-BELT PULLEYS

WELD-ON SPROCKETS • For most replacement needs • Sprockets and sprocket hubs sold separately • For 3/8", 1/2", 5/8", 3/4" pitch roller chain • Simply weld together

• For “4L” or “A” belts • Cast zinc construction; with set screws • Suitable for fractional HP applications

FOR USE WITH 3/8" PITCH #35 CHAIN

FOR USE WITH 1/2" PITCH #40 CHAIN

# Fits Wt. # Fits Wt. Teeth Hub (lbs.) ITEM PRICE Teeth Hub (lbs.) ITEM PRICE 16 V 0.1 3844008 2.39 12 V 0.1 3848827 2.49 Wt. Bore (lbs.) ITEM PRICE 18 V 0.1 3840070 2.39 13 V 0.2 3844537 2.49 20 V 0.1 14 V 0.2 3844545 2.59 3844016 2.89 2" O.D. 22 W 0.3 3840072 2.79 15 V 0.2 3844552 2.59 1/2" 0.3 8178709 6.99 24 W 0.2 3844024 3.49 16 W 0.2 3844560 2.69 5/8" 0.3 8178725 6.99 26 W 0.3 17 W 0.3 3844578 2.79 3840073 3.49 3/4" 0.3 8178733 6.99 18 W 0.3 3844586 3.19 28 W 0.3 3844032 3.99 2-1/2" O.D. 19 W 0.4 3844594 3.29 30 W 0.4 3840074 3.89 1/2" 0.4 8178741 7.99 20 X 0.3 3844602 3.39 36 W 0.5 3844040 5.49 5/8" 0.4 8178758 7.99 24 X 0.6 3844636 4.79 40 W 0.7 3840076 6.29 3/4" 0.3 8178766 7.99 26 X 0.7 3844644 4.99 45 W 0.9 3840077 6.59 3" O.D. 28 X 0.9 3844651 5.79 48 W 1.1 3844057 7.49 1/2" 0.5 8178832 7.99 30 X 1.0 3844669 6.49 60 W 1.7 3844065 9.99 5/8" 0.5 8178840 7.99 32 X 1.3 3844677 7.99 72 W 2.5 3844073 12.99 3/4" 0.5 8178857 7.99 36 X 1.8 3844685 9.49 FOR USE WITH 5/8" PITCH 3-1/2" O.D. 40 X 2.1 3844693 10.99 #50 CHAIN 1/2" 0.5 8178865 10.99 45 X 2.6 3844701 12.99 5/8" 0.5 8178881 10.99 # Fits Wt. 48 X 3.1 3844719 14.49 3/4" 0.5 8178899 10.99 Teeth Hub (lbs.) ITEM PRICE 54 X 3.9 3844081 17.99 4" O.D. 10 V 0.2 3844727 3.49 60 X 4.9 3844099 21.99 1/2" 0.6 8178907 11.99 12 W 0.2 3844743 3.79 FOR USE WITH 3/4" PITCH 5/8" 0.5 8178915 11.99 13 W 0.3 3844750 3.99 #60 CHAIN 3/4" 0.6 8179012 11.99 14 W 0.3 3844768 3.99 4-1/2" O.D. # Fits Wt. 15 W 0.4 3844776 4.29 1/2" 0.7 8179020 13.99 Teeth Hub (lbs.) ITEM PRICE 16 W 0.5 3844784 4.39 5/8" 0.7 8179038 13.99 17 X 0.5 3844792 4.49 9 V 0.3 3844917 3.79 3/4" 0.7 8179053 13.99 18 X 0.6 3844800 4.49 11 V 0.4 3844933 3.99 5" O.D. 22 X 1.1 3840078 5.59 12 W 0.5 3844941 4.29 1/2" 0.7 8179079 14.99 24 X 1.3 3844859 6.99 14 W 0.8 3844966 5.29 5/8" 0.7 8179111 14.99 26 X 1.6 3844867 7.59 15 X 0.8 3844974 5.79 3/4" 0.8 8179145 14.99 28 X 1.9 3844875 7.99 16 X 0.9 3844982 6.49 32 X 1.0 3840079 10.49 6" O.D. 18 X 1.3 3845005 6.79 36 X 3.3 3844909 13.49 1/2" 1.0 8179178 15.99 20 X 1.8 3840090 7.19 42 X 4.6 3840084 16.19 5/8" 0.9 8179186 15.99 22 X 2.2 3845047 9.49 48 X 6.2 3840088 19.99 3/4" 0.9 8179194 15.99 24 X 2.7 3840091 9.99 26 X 3.2 3840093 10.99 28 X 3.9 3840098 11.99 Note: 30 X 4.5 3845088 15.49 We recommend using low hydrogen electrodes for welding. 54 X 16.1 3840115 39.99

IDLER SPROCKETS • Versatile design covers a greater range of bore sizes • All 17 mm bore sprockets can easily be changed to 5/8", 1/2" or 3/8" bore by using a pair of bushings listed on page 76. • Hardened tooth, zinc plated finish

No. Teeth

Chain Size

Bore

Wt. (lbs.)

ITEM

PRICE

17 15 17 13 15 12

40 50 50 60 60 80

17 mm 17 mm 17 mm 17 mm 17 mm 3/4"

0.5 0.6 0.9 0.8 1.1 1.5

8069932 8069940 8069957 8069965 8069973 8069981

6.49 6.99 7.49 8.49 9.49 10.99

• Tempered polyester cords for high tensile strength and low elongation • Anti-static, heat and oil resistant • Meet or exceed ISO, JIS, BS, SAE, KS, and RMA standards • V-BELT SIZES measured as follows: A SECTION – 1/2" top width B SECTION – 21/32" top width • To determine size, measure the outside circumference of the belt and subtract 2" if “A” BELT and 3" if “B” BELT Size A22 A26 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A43 A46 A50 A56 A58 B29 B40 B42 B46 B48 B51 B55 B58 B62 B66 B70 B71 B75 B80 B81 B85 B90 B95

F.H.P. Series* 4L-240 4L-280 4L-300 4L-310 4L-320 4L-330 4L-340 4L-350 4L-360 4L-370 4L-380 4L-390 4L-400 4L-410 4L-420 4L-430 4L-450 4L-480 4L-520 4L-580 4L-600 5L-320 5L-430 5L-450 5L-490 5L-510 5L-540 5L-580 5L-610 5L-650 5L-690 5L-730 5L-740 5L-780 5L-830 5L-840 5L-880 5L-930 5L-980

Wt. (lbs.) 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.4 0.3 0.3 0.5 0.5 0.5 0.5 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.9 0.9 0.9 0.9 1.0 1.1

ITEM

PRICE

8064982 8064990 8065005 8065013 8065021 8065039 8065047 8065054 8065062 8065070 8065088 8065096 8065104 8065112 8065120 8065138 8065146 8065153 8065161 8065179 8065187 8065195 8065203 8065211 8065229 8065237 8065245 8065252 8065260 8065278 8065286 8065294 8065302 8065310 8065328 8065336 8065344 8065351 8065369

2.99 2.99 2.99 2.99 3.19 3.29 3.29 3.29 3.39 3.39 3.59 3.59 3.79 3.99 3.99 4.19 4.19 4.19 4.59 5.29 5.49 4.29 5.79 5.99 6.49 6.79 6.99 7.29 7.79 8.49 8.99 9.49 9.49 9.99 10.59 10.99 11.39 11.99 12.79

* Common fractional horsepower (F.H.P.) series cross-reference

• Stops squeals and protects against belt slippage • Prevents premature wear and extends belt life by conditioning against drying and cracking • Suitable for fan belts, power steering belts, water pumps, and power tools • 450 g can • Sorry, chemicals cannot be shipped 99 8131179 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . .

IDLER PULLEY

• 4" dia. • 1" wide flat groove • 5/8" bore with bearings • Ideal for use as a V-belt tightener 3845500 – Wt. 0.8 lbs. . . . . . . . . . . . . . . .

DRIVELINE HARDWARE

BELT DRESSING

V-BELTS

2499

KEYED SHAFTING

• Material: C 1018 round bar • 65,000 lb. tensile strength • Driveline quality round bar • Keyway cut down the entire length of shaft Shaft Key Wt. size size (lbs.) ITEM PRICE 1/2" x 3 ft. 1/8" 1.9 8079717 16.99 5/8" x 3 ft. 3/16" 2.9 8079725 16.99 3/4" x 3 ft. 3/16" 4.3 8079733 18.99 7/8" x 3 ft. 1/4" 5.3 8079741 19.99 1" x 3 ft. 1/4" 6.7 8079758 29.99 1" x 6 ft. 1/4" 15.8 8079766 56.99

KEYSTOCK SOLD IN 12" LENGTHS

Size Wt. (lbs.) 1/8" x 12" 0.1 3/16" x 12" 0.1 1/4" x 12" 0.2 5/16" x 12" 0.3 3/8" x 12" 0.5

ITEM 8137010 8075269 8075277 8075285 8075293

PRICE 1.39 1.29 1.49 1.99 2.49

SHAFT COLLARS Wt. Bore (lbs.) 3/16" 0.1 1/4" 0.1 5/16" 0.1 3/8" 0.1 7/16" 0.1 1/2" 0.1 9/16" 0.1

ITEM

PRICE

3871266 3871274 3871282 3871290 3871308 3871316 3871324

1.29 1.29 1.29 1.39 1.39 1.49 1.49

Wt. Bore (lbs.) 5/8" 0.1 3/4" 0.1 7/8" 0.2 1" 0.2 1-1/8" 0.2 1-1/4" 0.4 1-3/8" 0.4 1-1/2" 0.4

ITEM PRICE 3871332 3871340 3871357 3871365 3871373 3871399 3871407 3871423

1.59 1.69 1.79 1.99 2.19 2.99 3.69 3.89

• Collars are made of zinc plated “weldable” mild steel • Comes with set screws

DRIVELINE HARDWARE

FINISHED BORE SHEAVES • Complete single groove cast iron sheaves; hollow head statically balanced • Combination groove will fit “4L” or “A” belts and “5L” or “B” belts • 5/8", 3/4", 7/8" bore has set screw and keyway; 1/2" bore has set screws only • Includes two 1/4"– 20 set screws Model Outside Wt. 1/2" BORE No. Dia. (lbs.) ITEM PRICE BK24 2.4" 0.8 8046310 5.49 BK25 2.5" 0.8 8046351 5.49 BK26 2.6" 0.9 8046419 5.99 BK27 2.7" 0.9 – – BK28 2.95" 1.1 – – BK30 3.15" 1.3 – – BK32 3.35" 1.4 – –

CAST IRON SHEAVES

5/8" BORE ITEM PRICE 8046336 5.99 8046377 5.99 8046427 6.49 8046443 6.99 8046484 7.49 8046534 7.99 8046567 8.99

7/8" BORE ITEM PRICE – – – – – – 8046468 6.99 8046518 7.49 8046559 7.99 8046583 8.99 D

SINGLE GROOVE SHEAVES

With combination groove that will fit “4L” or “A” belts and “5L” or “B” belts. Model Outside Wt. No. Dia. (lbs.) A) SOLID BK30H 3.15" 1.3 BK32H 3.35" 1.6 BK34H 3.55" 1.7 BK36H 3.75" 1.9 BK40H 3.95" 1.6 BK45H 4.25" 2.1 BK50H 4.75" 2.2 BK55H 5.25" 2.6 BK60H 5.75" 3.1 BK65H 6.25" 3.5 B) SPOKED BK70H 6.75" 3.3 BK80H 7.75" 3.9 BK90H 8.75" 5.3 BK100H 9.75" 6.0 BK120H 11.75" 7.4

DOUBLE GROOVE SHEAVES

ITEM

PRICE

8045635 8045668 8045676 8047243 8039679 8045684 8039695 8046096 8046104 8046112

8.99 9.49 9.99 10.99 12.99 11.49 11.99 12.99 14.49 16.99

8046120 8046146 8046153 8039711 8046179

16.99 19.99 22.99 29.99 34.99

• For use on applications of 5 HP and over • Extra groove prevents slippage • Fits “4L” or “A” belts and “5L” or “B” belts Model No.

HX1/2 HX5/8 HX3/4 HX7/8 HX1 HX1-1/8 HX1-1/4 HX1-3/8 HX1-1/2

Bore Dia. 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2"

Wt. (lbs.) 0.8 0.8 0.8 0.7 0.6 0.6 0.5 0.4 0.3

ITEM

PRICE

2.2 2.2 2.7 2.9 3.5 4.2 4.3

8046187 8039646 8046195 8046203 8046211 8046229 8046237

15.99 18.99 18.49 18.99 19.49 21.99 22.99

6.2 7.4 8.3 12.7

8046286 8046294 8039638 8046302

28.99 34.99 44.99 54.99

BUSHINGS

• Select the bushing with the appropriate diameter bore and a sheave with the desired outside diameter • Slide these both pieces on to the shaft and tighten the supplied bolts • The bushing and sheave form a completed pulley assembly that clamps tightly to shaft • Bolts act as a built-in puller to separate the bushing from the sheave and remove the unit from shaft • Compatible with Browning "H" Series • Features & Benefits: * Solid Flange maintains concentric bore and reduces vibration in the drive • Double split barrel provides positive clamping to the shaft • External key on most sizes for positive drive and greater torque carrying capability Model No.

Outside Wt. Dia. (lbs.)

C) SOLID 2BK32H 3.35" 2BK34H 3.55" 2BK36H 3.75" 2BK40H 3.95" 2BK45H 4.25" 2BK50H 4.75" 2BK55H 5.25" D) SPOKED 2BK70H 6.75" 2BK80H 7.75" 2BK90H 8.75" 2BK120H 11.75"

SPLIT TAPERED BUSHING

3/4" BORE ITEM PRICE 8046344 5.99 8046393 5.99 8046435 6.49 8046450 6.99 8046500 7.49 8046542 7.99 8046575 8.99

ITEM

PRICE

8069494 8069502 8069510 8069528 8069536 8069544 8069551 8069569 8069577

6.49 6.49 6.49 6.49 6.49 6.49 6.49 6.49 6.49

Use with 17 mm bore sprockets. Wt. 0.1 lbs. I.D. x O.D. ITEM PRICE 3/8" x 17 mm 8070666 1.79/pr. 1/2" x 17 mm 8070674 1.79/pr. 5/8" x 17 mm 8070682 1.79/pr.

2-BOLT FLANGE BEARING ASSEMBLIES

Wt. 0.8 lbs.

3870169 – 1/2" 3870177 – 5/8" . . . . . . . . . . . . . .

899/ea.

A Load Cap. 200 lbs. 300 lbs. 500 lbs. 750 lbs. 1,000 lbs.

Size 3" square A 4" square 6" square 9" round B 12" round

Wt. (lbs.) 0.2 0.3 0.5 0.9 1.6

ITEM PRICE 8148462 8148470 8148488 8148496 8148504

3.49 3.99 4.49 7.99 9.99

• All metal construction • Turn on ball bearings • Mounts to metal, wood or plastics

BEARING ASSEMBLIES D C

C) BEARINGS with D) PILLOW BLOCK with ECCENTRIC LOCKING COLLAR BEARING

Size Wt. (lbs.) 1/2" 0.3 5/8" 0.3 3/4" 0.4 7/8" 0.5 1" 0.4

ITEM 3870070 3870912 3870920 3870938 3870953

E) FLANGE MOUNT with BEARING

Wt. Wt. PRICE (lbs.) ITEM PRICE (lbs.) 1.3 3870003 9.99 1.0 6.49 1.2 3870011 9.99 0.9 6.49 1.5 3870029 9.99 1.3 6.49 1.7 3870037 9.99 1.7 6.49 1.7 3870052 9.99 1.6 6.99

F) 2 PC. PRESSED STEEL with BEARING

Wt. ITEM PRICE (lbs.) ITEM PRICE 3870071 9.99 0.5 3870326 9.99 3870072 9.99 0.5 3870334 9.99 3870185 9.99 0.7 3870342 9.99 3870041 9.99 0.9 3870359 9.99 3870219 9.99 0.8 3870375 9.99

DRIVELINE HARDWARE

TURNTABLE BEARINGS

BEARING COMPONENTS Create your own bearing assembly by inserting the bearing size you need into the housing of your choice. G) BEARINGS with ECCENTRIC LOCKING COLLAR

Wt. (lbs.) 1-1/8" 0.7 1-3/16" 0.7 1-1/4" 1.2 1-3/8" 1.1 1-7/16" 1.0 1-1/2" 1.5 1-3/4" 1.5 1-15/16" 1.7 Size

ITEM 3870961 3870979 3870987 3870050 3870051 3871027 3871043 3870049

I J

H) PILLOW BLOCK HOUSING

I) FLANGE MOUNT HOUSING

J) PRESSED STEEL HOUSING

Wt. Wt. Wt. PRICE (lbs.) ITEM PRICE (lbs.) ITEM PRICE (lbs.) ITEM PRICE 7.79 2.1 3870054 5.99 1.6 3870059 7.29 0.6 3870068 4.29 7.99 2.1 3870054 5.99 1.6 3870059 7.29 0.6 3870068 4.29 9.29 2.4 3870055 6.69 2.2 3870061 7.49 0.7 3870069 4.99 9.99 2.4 3870055 6.69 2.2 3870061 7.49 0.7 3870069 4.99 9.99 2.4 3870055 6.69 2.2 3870061 7.49 0.7 3870069 4.99 – – – 12.69 2.9 3870056 7.49 2.5 3870062 7.99 – – – 14.49 3.2 3870057 7.29 3.2 3870064 7.99 – – – 17.49 4.2 3870058 9.49 3.3 3870065 8.99

STEADY BEARINGS • For P.T.O. drive shafts and other similar applications • Medium duty self-aligning bronze bearing 3/4" 8180978 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7/8" 8180986 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1" 8180994 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT BALL BEARINGS

• Light and medium series bearing are sealed on both sides • Bearing numbers represent the common standard numbering for all ball bearings

Bearing No. 6200-2RS 6201-2RS 6202-2RS 6202-16-2RS 6202-5/8-2RS 6203-2RS 6203-5/8-2RS 6203-3/4-2RS 6204-2RS 6205-2RS 6205-1-2RS 6206-2RS 6304-2RS

999 999 999

O’all Dim. (mm) Wt. PRICE ID. x O.D. x W (lbs.) ITEM (ea.) 10 x 30 x 9 0.1 3850609 1.79 12 x 32 x 10 0.1 3850617 2.49 15 x 35 x 11 0.1 3850625 2.49 16 x 35 x 11 0.1 3850633 2.99 5/8" x 35 x 11 0.1 3850641 3.49 17 x 40 x 12 0.2 3850658 3.49 5/8" x 40 x 12 0.2 3850666 3.49 3/4" x 40 x 12 0.1 3850674 3.49 20 x 47 x 14 0.2 3850682 3.49 25 x 52 x 15 0.3 3850690 3.99 1" x 52 x 15 0.3 3850708 5.99 30 x 62 x 16 0.5 3850716 7.99 20 x 52 x 15 0.3 3850823 6.29

DRIVELINE HARDWARE

SINTERED BRONZE BUSHINGS Wt. 0.1 lbs.

Bore 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2"

Oil impregnated, self lubricating, bronze bushings.

O.D. Length ITEM PRICE 3/8" 1" 3872009 3.19/pr. 1/2" 1" 3872017 3.59/pr. 1/2" 1" 3872025 3.19/pr. 5/8" 1" 3872033 3.99/pr. 3/4" 1" 3872041 5.19/pr. 5/8" 1" 3872058 3.29/pr. 3/4" 1" 3872066 4.49/pr. 7/8" 1" 3872074 5.69/pr.

TRACTOR SEATS

Bore 5/8" 5/8" 5/8" 3/4" 3/4" 7/8" 7/8" 1" 1" 1"

O.D. Length ITEM 3/4" 1-1/4" 3872082 7/8" 1-1/4" 3872090 1" 1-1/4" 3872108 7/8" 1-1/4" 3872116 1" 1-1/4" 3872124 1" 1-1/4" 3872132 1-1/8" 1-1/4" 3872140 1-1/4" 1-1/2" 3872157 1-3/8" 1-1/2" 3872165 1-1/2" 1-1/2" 3872173

PRICE 3.99/pr. 5.49/pr. 6.99/pr. 4.19/pr. 5.19/pr. 3.99/pr. 5.99/pr. 3.69/ea. 5.19/ea. 6.49/ea.

B D

G H F

WITH A VARIETY OF MOUNTING PATTERNS, THESE SEATS CAN FIT MOST INDUSTRIAL, COMMERCIAL AND FARM EQUIPMENT.

A) BLACK PAN SEAT • Rigid seat • 3 drain holes • 2 fixed mounting bolts 99 8002694 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . B) ECONOMY TRACTOR SEAT • Moulded cushion, drawn steel pan with protective edge trim • Black vinyl cover 99 2060366 – Wt. 10.6 lbs. . . . . . . . . . . . . . . . . . . C) COMPACT TRACTOR SEAT • 16" narrow seat, flip style with brackets and drain hole • Universal application for compact tractors • Foamed polyurethane upholstery • All hardware included 99 8043609 – Wt. 12.0 lbs. . . . . . . . . . . . . . . . . . . D) HIGH BACK SEAT with STEEL PAN Similar to above but also features air circulation design, water drainage & safety switch cavity.

34 69

Wt. 13.7 lbs. 8002695 – BLACK 8062457 – YELLOW (SHOWN) . . . . . . . . . . .

8999

STABILIZER PIN

• 5/8" 18-thread • 7/8" dia. shank x 2-5/8" long • Replaces Ford 23044, MF 181777M1 8215980 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

Hardware not included

E) UNIVERSAL SUSPENSION SEAT • Suspension includes hydraulic shock absorber • Multi-purpose application: agriculture, forklift, and construction • Horizontal slide travel: 8-3/4" 99 8032915 – Wt. 44.0 lbs. . . . . . . . . . . . . . . . . F) HI-BACK DELUXE TRACTOR SEAT • Black vinyl seamless moulded cushion with drawn steel pan and protective edge trim • O’all dim.: 18-1/2"W x 17-7/16"H x 21-3/4"L • With seat slides 99 8001993 – Wt. 20.0 lbs. . . . . . . . . . . . . . . . . G) 3 PC TRACTOR SEAT (JOHN DEERE) Fits tractor models: 1010, 2010, 2510, 2520, 3010, 3020, 4000,4010, 4020, 4040, 4230, 4320, 4340, 4400, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 and 7520 and others. 99 2060068 – Wt. 18.7 lbs. . . . . . . . . . . . . . . . . H) DELUXE HI BACK TRACTOR SEAT A deluxe version of the above seat. 99 2060333 – Wt. 17.0 lbs. . . . . . . . . . . . . . . . . I) BLACK TRACTOR SEAT SLIDES • Heavy duty slides • Large lever 99 8002693 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . .

129

139 159 29

UNIVERSAL YOKE PIN KIT

249

Fits most American P.T.O. yokes. 8087413 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

229

TRACTOR TOOLBOX

• Clamps onto steering wheel of off-road vehicles to assist in steering • To be used on tractors, forklifts or other off-road vehicles • NOT FOR USE ON HIGHWAY VEHICLES 3800123 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

MUFFLER CLAMPS

Fits pipe dia. 1-1/2" 1-5/8" 1-7/8" 2" 2-1/4" 2-1/2" 2-3/4" 3" 3-1/2" 4"

Wt. (lbs.) 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.5 0.5 0.6

ITEM 8059206 8059214 8059230 8059248 8059255 8059271 8059289 8059297 8059305 8059313

PRICE 1.99 1.99 1.99 1.99 2.49 2.49 2.49 2.99 3.49 3.99

3-POINT HITCH QUICK HITCH

• Category 1 hitch • Allows for quick attachment and release of 3 point hitch implements • Heavy duty steel construction with powder coating 99 8212995 – Wt. 78.0 lbs. . . . . . . . . . . . . .

• Heavy gauge steel • Easily mounts to tractors • Harware and brackets for universal mounting included 16" 99 8213027 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . 20" 99 8213043 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . .

TRACTOR SEATS

WHEEL SPINNER

29 34

EXHAUST PIPE CLAMP 8113094 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

449

EXHAUST CAPS

Fits pipe dia. 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3"

Wt. (lbs.) 0.6 0.6 0.7 0.7 0.9 0.8 0.9

ITEM 2440066 2440067 2440068 2440069 2440070 2440071 2440072

PRICE 4.99 5.29 5.49 5.79 5.99 5.99 6.49

199

3-POINT HITCH REPLACEMENT PARTS TOP LINK

LI FT

RATCHET JACK

RM TA LIF

ST AB ILI ZE RA RM

AR M

R WBA DRA

RM RA ZE ILI AB ST

Listed below are the most common replacement parts for Category One & Two 3-Point Hitches which can be used in building or adapting equipment for use on 3-Point Hitches.

CAT 1 LINK ARM 8216129 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . .

1699

LIFT ARM • Includes pins and handle • 1-1/4" thread dia.; 1" dia. pins • Hole centre adjusts from 20" to 28" 3800013 – Wt. 14.8 lbs. . . . . . . . . . . . . . . . . . .

5499

8216137 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . .

2499

3-POINT HITCH PARTS & COMPONENTS

HITCH PINS

RED HEAD HITCH PINS

Size Wt. (lbs.) 1/2" x 3-1/2" 0.5 5/8" x 4-1/2" 0.8 5/8" x 6-1/4" 0.9 3/4" x 4-1/4" 1.0 3/4" x 6-1/4" 1.2 7/8" x 6-1/4" 1.6 1" x 6-1/4" 2.0 1-1/8" x 6-1/4" 2.5

ITEM PRICE 8051216 2.49 8051234 2.79 8051243 2.99 8051252 3.49 3806817 4.29 3806825 5.79 3806833 6.49 3806841 8.49

• Zinc plated clip • Double heat-treated, forged, high tensile steel • Plastic coated handle, black painted 1-piece pin Size 3/4" x 4" 3/4" x 6-1/2" 7/8" x 6-1/2" 1" x 7-1/2"

Wt. (lbs.) 1.1 1.4 1.7 2.4

ITEM PRICE 8215998 4.99 8216004 4.99 8216012 5.99 8216020 8.99

STAY STRAPS

FLAT BARS • Fits all Ferguson, MF 35 and 50, Ford 2N, 8N, 9N, 600 and 800 • Cat. 1 • O’all dim.: 3/8" x 1-3/4" Centre O’all Dia. Dim. 31-9/16" 3/8" x 1-3/4" 33-1/8" 3/8" x 1-3/4"

Wt. (lbs.) ITEM PRICE 6.5 8216087 13.99 6.9 8216095 14.99

Body Pin Adjustment Cat. Length Hole (Hole Centres) Dia. 1 16" 3/4" 20-1/2" to 29" 2 16" 1" 21" to 33" 1 20" 3/4" 24-1/2" to 33"

• Stabilizes 3-point hitch to prevent swaying • Fits all Ferguson, Ford 2N, 8, 9N, NAA, 600, 700, 800, 900 • Oliver 3 point conversion; MF35 and 50 wgt. UPPER STAY STRAP 99 8216079 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . LOWER STAY STRAP 99 8216061 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

7 7

Wt. (lbs.) ITEM PRICE 8.3 8216038 24.99 9.3 8216046 34.99 8.9 8216053 36.99

Wt. Cat. Dia. Usable (lbs.) 2-3/4" 0.5 1 3/4" 3-7/8" 0.6 3-9/16" 1.2 2 1" 4-5/16" 1.3

ITEM PRICE 8215915 8215923 8215964 8215972

1.99 2.09 3.99 4.49

LIFT ARM PINS Cat. Shaft Dia. Thread Size 1 7/8"-14 7/8" 1 7/8"-14 1 to 2 7/8"-14 1-1/8" 2 1-1/8"-12

TYPE A Length Usable Length 5-1/2" 1-3/4" 5-1/2" 2-1/4" 5-1/4" 1-3/4" 6-5/16" 2"

TYPE B ITEM PRICE Length ITEM PRICE 8216244 2.99 5-1/8" 8216228 2.99 8216145 4.99 6-1/4" 8216236 5.49 8216194 6.99 5-1/4" 8216152 6.99 8216210 7.99 6" 8216202 7.99

DRAW BAR

CONVERSION BUSHINGS

Type Cat. I.D. O.D. Length Top link Lift arm

2-1 2-1 3-2 2-1 2-1

3/4" 1" 1-5/8" 3/4" 1" 2" 1" 1-1/4" 2" 7/8" 1-1/8" 1-3/8" 7/8" 1-1/8" 1-3/4"

Wt. (lbs.) 0.3 0.4 0.5 0.3 0.4

ITEM PRICE 8064875 3800248 3800249 8064867 3800250

3.49 3.29 4.49 3.49 3.29

• Category 1 • 11 holes x 3/4" dia. • Lift arm spacing: 26"; pin dia.: 7/8" 8215907– Wt. 15.4 lbs. . . . . . . .

FORGED WELD-ON BALL SOCKETSa b

f TOP LINK

Cat. 2

a 3-1/8"

c e

a c e

d LIFT ARM

TOP LINK

b 3/4" 1"

c 1-1/8" 1-1/8"

d 1/2" 5/8"

e 1-3/4" 2"

a f Wt. (lbs.) ITEM PRICE 2-1/4" 0.9 8216103 13.49 2-5/8" 1.5 8216111 15.99

b 1-1/8"

c 2-3/4"

d 3/4"

e 1-3/4"

f Wt. (lbs.) ITEM PRICE 3-1/8" 3.2 8216137 24.99

Cat. a 1 2" 2 2-3/8" LIFT ARM

2799

DOUBLE RING PRESTO PINS

a b

B A

Pin dia. Pkg. Wt. PRICE “b” Qty. (lbs.) ITEM (pkg.) 3/32" x 1-3/4" 3/8"-5/8" 9 0.1 3800241 2.49 1/8"x 2-1/16" 1/2"-7/8" 6 0.1 3800242 1.79 5/32" x 3" 5/8"-1" 5 0.1 3800243 1.89 3/16" x 4-3/16" 3/4"-1-1/4" 2 0.1 3800245 1.19 1/4" x 4-1/4" 7/8"-1-1/2" 2 0.3 3800246 1.49 5/16" x 3-7/8" 3/4"-1-1/4" 1 0.3 3800247 1.19 Dia. x “a”

SAFETY PINS

A B

Pin Dia. 3/32" 5/32" 3/16" 7/32"

Wt. (lbs.) 0.1 0.3 0.6 0.6

ITEM 3800460 3800461 3800462 8123259

PRICE (pkg.) 1.69 2.29 3.59 2.79

P.T.O. LOCK PINS D

C D E

Length 3" 3" 3" 3" 3"

ITEM 3806759 8002034 8002035 3890478 8202657

PRICE 0.99 0.99 1.29 1.29 1.19

LINCH PINS

DOUBLE LOCK HITCH PINS

Package of 4. * Heavy Duty

1899 2199 2499

UNIVERSAL JOINTS • Standard type U-joints • Designed for use on power take-offs, hydraulic hoists, farm implements and other similar applications • Forged steel yokes and crosses, accurately machined and heat treated on all wearing surfaces • Max. recommended torque continuous duty: 1,000 RPM, 400 in.-lbs. (approx. 6.3 HP) • Max. recommended angle of operation: 15° continuous, 45° slow speed • 3/8"-16 set screws Size & Slip Size Wt. (lbs.) ITEM PRICE 3/4"R x 3/4"R 2.5 8087157 1"R x 1"R 2.2 8087165 3/4"R x 3/4" Sq. 2.4 8087181 99 7/8"R x 3/4" Sq. 2.4 8087199 1"R x 3/4" Sq. 2.3 8087215 1"R x 7/8" Sq. 2.3 8087223

Pin Wt. PRICE Length (lbs.) ITEM (pkg.) 3/16" 1-7/8" 0.1 3800236 1.29 1/4" 2" 0.2 3800233 1.59 5/16" 2" 0.3 3800234 1.49 7/16" 2" 0.4 3800235 1.49 3/8" 2-3/4" 0.2 8090458 1.39 7/16" 2-1/2" 0.5 3800239 1.99 7/16" H.D. 2-1/2" 0.5 3800237 2.49 Pin Dia.

STANDARD

• Grade 5 hitch pins for agricultural and industrial use • Quick release handles • Double lock mechanism ensuring pin will remain in place • Pin and handle are powdercoated with zinc plated locks 3/4" x 6" 8212789 – Wt. 2.5 lbs. . . . . . . . . . . . . . . 7/8" x 6" 8212805 – Wt. 2.9 lbs. . . . . . . . . . . . . . . 1" x 6" 8212821 – Wt. 3.3 lbs. . . . . . . . . . . . . . .

LONG

79¢ 19¢

Pin Dia. 5/16" 1/4" 1/4" 5/16" 5/8"

2 pack. 1/8" x 4-1/8" 8090433 – Wt. 0.1 lbs. . . . . . . . . . 5/32" x 4-1/8" 8090441 – Wt. 0.2 lbs. . . . . . . . . .

Wt. 0.1 lbs.

3-POINT HITCH PARTS & COMPONENTS

PRESTO PINS

F) PEAR SHAPE 2 pack. Pin Pin Wt. Dia. Length (lbs.) 1/4" 2" 0.1 5/16" 2-1/4" 0.1 7/16" 2" 0.2 G) FOR TUBES 2 pack. Pin Wt. Pin Dia. Length (lbs.) 1/4" 2" 0.1 5/16" 2" 0.2 3/8" 2-3/8" 0.3

F ITEM 8090482 8090490 8090508 ITEM 8090516 8090524 8090532

PRICE /pr. 0.79 0.99 1.39 PRICE /pr. 1.09 1.19 1.69

SPLINED ADAPTER SLEEVE • 1-1/8" x 6-spline interior • 1-3/8" x 6-spline exterior 8087405 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

SNAP HITCH SPLINED ADAPTER • 7" long • 1-3/8" x 21 female spline, 1-3/8" x 6 male 3852753 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . .

4099

3-POINT HITCH PARTS & COMPONENTS

HARDWARE KITS

All our hardware kits are pre-sorted in plastic storage boxes for you to easily find what you need.

ASSORTED NUT & BOLT KITS

150 PC WING NUT KIT

347 PC SAE KIT 8092181 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . 347 PC METRIC KIT 8092199 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . 146 PC ASSORTED NUT KIT 8092231 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

Includes: thirty 3/16"-24, thirty 3/16"-32, twenty-five 1/4"-20, twenty-five 1/4"-28, 99 twenty 5/16"-18, and twenty 5/16"-24. 8092140 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . .

6 699 240 PC NUT/BOLT/LOCK WASHER KIT 899

1299

8092207 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . .

699

2 PC SHEAR BOLTS 1001 PC ASSORTED NUTS AND BOLTS with CABINET 8092249 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . .

1999

SCREW KITS

A) 170 PC U-CLIP AND SCREW KIT 4 screw sizes: #6, #8, #10, and 1/4" with 5 sizes of clips. 8059040 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . B) 200 PC HEX HEAD SCREW KIT 8092157 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . C) 150 PC SCREW KIT • 1/4", 5/16" and 3/8" in NC and NF thread • 6 sizes ranging from 1/8" to 3/8" 8059057 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . D) 106 PC ALLEN CAP SCREW KIT 8092223 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . .

#557540 Ariens 8145336 – Wt. 0.1 lbs. #710-0890 Mtd 8145831 – Wt. 0.1 lbs. #710-0380 Mtd 8145849 – Wt. 0.1 lbs. #710-0380 Mtd 8145856 – Wt. 0.1 lbs.

399 99 ................... 3 99 ................... 3 99 ................... 3 ...................

WASHER SETS

1099 999

250 PC FLAT AND LOCK WASHER SET Includes 98 flat washers and 152 lock washers sized from 3/16" to 3/8". 99 8002541 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . 720 PC LOCK WASHER SET 99 • Zinc plated • 3 styles: #6, #8, #10 99 • I.D. 1/4", 5/16", 3/8" 99 8002540 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . 200 PC ANTIVIBRATION WASHERS Includes 9 sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 15/32", 5/8", and 3/4". 99 8002542 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . 110 PC COPPER WASHER KIT Includes 6 sizes: 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8". 99 8092215 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . 99

11 9

201 PC CONICAL ANCHOR KIT

8 9

Includes: 100 screws, 100 anchors, and one 1/4" x 4" carbide drill bit. 8002534 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

54 PC ASSORTED WASHER/SEAL KIT

ROLL PIN KITS

120 PC ROLL PIN KIT • Contains: 4 black rubber cone washers, 30 sizes ranging from 1/16" dia. x 3/16" 14 black rubber cone washers, 10 black long to 3/8" dia. x 2" long. 99 rubber o-rings, 12 black foam washers, 8 3802238 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . black foam washers, 6 red poly-fibre washers, 315 PC ROLL PIN KIT 6 white plastic o-rings, 2 aluminum washers, 30 sizes ranging from 1/16" dia. x 3/16" long and 2 E-style retainers to 3/8" dia. x 2" long. 99 • Assorted sizes 49 3801040 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . 8127763 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

151 PC EYE BOLT & HOOK SET

Small compression and extension springs. 3801008 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

Includes: 1-13/16", 1-1/8", and 1-15/16" eyebolts, 99 1-5/8", 2-1/2", and 3-3/8" screw hooks. 8002547 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . .

PIN KITS

799

O-RING KITS A

A) 20 PC CLEVIS PIN ASSORTMENT • 1/4", 5/16", and 3/8" • Lengths from 1" to 3" 8002544 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . A) 71 PC UNIVERSAL CLEVIS PIN KIT • 5 pcs. 5/16" x 2"; 18 pcs. 3/8" x 2"; 5 pcs. 7/16" x 2-1/2" • 3 pcs. 1/2" x 2" & 40 various hairpins 8059032 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . B) 150 PC HAIR PIN ASSORTMENT Includes: 6 sizes from 3/32" to 5/32", lengths from 1-3/16" to 2-5/16". 8002536 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . .

225 PC O-RING KIT Contains: sizes ranging from 3/32" I.D. x 15/64" O.D. to 3/4" I.D. x 1" O.D. 99 3801073 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . 54 PC AUTOMOTIVE O-RING KIT 99 Contains: sizes ranging from 3/8" I.D. x 9/16" O.D. to 3-1/8" I.D. x 3-1/2" O.D. 99 3801032 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . 407 PC O-RING KIT • I.D. sizes 1/8" to 2" 99 • O.D. sizes 1/4" to 2-1/4" 99 8025353 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . .

HARDWARE KITS

200 PC SPRING KIT

1199

SNAP RING AND E-CLIP KITS

COTTER PIN KITS 144 COTTER PINS with SPREADER/REMOVER TOOL • 40 pcs. each of 1/16" x 3/4", 3/32" x 3/4", 3/32" x 1" • 12 pcs. 1/8" x 1"; 12 pcs. 1/8" x 1-1/4" 99 3800893 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . STAINLESS STEEL KIT 99 8117814 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . 555 COTTER PINS – 150 pcs. 1/16" x 1"; 150 pcs. 3/32" x 1"; 100 pcs. 3/32" x 1-1/2"; 75 pcs. 1/8" x 1-1/4"; 50 pcs. 1/8" x 2"; 30 pcs. 5/32" x 2-1/2". 99 3801065 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . STAINLESS STEEL KIT 99 8117830 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . 144 LARGE COTTER PINS • 50 pcs. 1/8" x 2"; 30 pcs. 5/32" x 2-1/2" • 20 pcs. 3/16" x 3"; 20 pcs. 1/4" x 2" • 16 pcs. 1/4" x 3"; 8 pcs. 5/16" x 2-1/2" 99 3800535 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . STAINLESS STEEL KIT 99 8117848 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . 1,000 PC COTTER PIN KIT Includes 6 different sizes. 99 8002535 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . .

2 3

9 16 9 19 12

POWERFIST

100 PC INTERNAL SNAP RING KIT 6 sizes ranging from 7/16" to 13/16". 3800502 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . 300 PC EXTERNAL SNAP RING KITS 18 sizes ranging from 1/8" to 1-1/4". 3801024 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . 150 PC E-CLIP KIT 9 sizes ranging from 1/16" to 7/8". 8059065 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . 300 PC E-CLIP KIT 9 sizes ranging from 1/16" to 3/4". 3801016 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . 225 PC RETAINING RING SET Includes 70 internal rings sized from 13/16" to 3/4" and 155 external rings sized from 3/16" to 1-1/4". 8002539 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

399

1199 599 799 999

460 PC SHOP ASSORTMENT

We proudly supply you with Powerfist products, which have a proven reliability and great value, Only available at Princess Auto!

Includes 18 sizes of half round pins, roll pins, snap rings, and e-clips. 8002543 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . .

1299

HARDWARE KITS

WIRE CONNECTOR KITS

101 PC SPRING KIT

158 PC KIT Colour Count Min. Range Max. Range Grey 40 pcs 2x#22 2x#16 Blue 40 pcs 2x#22 3x#16 1x#18 & Orange 50 pcs 4x#16 & 1x#18 1x#20 Yellow 18 pcs 2x#18 4x#14 & 1x#18 Red 10 pcs 2x#14 2x#10 & 2x#12 8068785 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

STAINLESS STEEL HARDWARE KITS 475 PC STAINLESS STEEL NUT & BOLT ASSORTMENT

Contains an assortment of extension and compression springs. 2910069 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . .

399

150 PC STAINLESS STEEL HEX NUT ASSORTMENT Contains sizes: thirty M3, thirty M4, thirty M5, thirty M6, twenty M8, and ten M10. 99 8160582 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . .

• 100 hex head bolts: twenty of each 300 PC STAINLESS STEEL M4X16, M5X20, M5X25, and M6X20 NUT ASSORTMENT • 125 machined screws: fifty #4, fifty #5, and twenty-five #6 • 125 flat washers: fifty #4, fifty #5, and Contains sizes: eighty M3, seventy M4, seventy twenty-five #6 M5, fifty M6, twenty M8, and ten M10. 99 • 125 hex nuts: fifty M4, fifty M5, 8160574 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . and twenty-five M6 99 225 PC STAINLESS STEEL 8160616 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . .

250 PC STAINLESS STEEL FLAT and LOCK WASHER ASSORTMENT

SNAP RING ASSORTMENT

• Internal sizes: fifteen 7/16", ten 3/4", fifteen 5/8", ten 9/16", ten 1/2", and ten 13/16" • External sizes: fifteen 1/4", fifteen 1/2", • Lock washers/flat washers: ten 13/16", fifteen 5/16", fifteen 9/16", fifty 3/16", ninety 3/16", twenty-four 1/4", ten 7/8", fifteen 3/8", fifteen 5/8", five 1-1/4", thirty-two 1/4", fifteen 5/16", eighteen 5/16", fifteen 7/16", and ten 3/4" nine 3/8", and twelve 3/8" 99 99 8160590 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . 8160558 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . .

TIE WIRE

Gauge

Size

Material

14G 16G 18G 20G 20G 20G 20G 22G 20G 19G 19G 16G 18G

15 m 15 m 30 m 15 m 50 m 7m 7m 10.4 m 7.5 m 15 m 50 m 3-1/8 lbs. 30 m

Gal. Steel Gal. Steel Gal. Steel Gal. Steel Gal. Steel Stainless Steel Aluminum Copper Brass Black Steel Black Steel Black Steel Green PVC

Wt. (lbs.) 0.7 0.5 0.6 0.2 0.5 0.1 0.1 0.1 0.1 0.2 0.7 3.3 0.3

ITEM

PRICE

8176539 8176547 8176554 8176562 8176588 8176596 8176604 8176612 8176620 8176638 8176646 8176653 8176661

2.49 1.99 2.49 1.29 2.29 1.79 1.49 1.79 1.99 1.29 2.49 5.49 2.99

HEAVY DUTY EYE BOLTS Drop forged and heat treated.

Thread Size

Safe Working Load

Ultimate Load

Wt. (lbs.)

ITEM

PRICE

1/4" - 20 5/16" - 18 3/8" - 16 1/2" - 13 5/8" - 11 3/4" - 10

400 lbs. 1,000 lbs. 1,400 lbs. 2,000 lbs. 2,600 lbs. 6,000 lbs.

3,000 lbs. 4,000 lbs. 6,000 lbs. 7,800 lbs. 10,000 lbs. 24,000 lbs.

0.1 0.1 0.2 0.3 0.7 1.0

8007010 8007012 8007014 8007017 8007022 8007025

1.99 1.99 2.99 3.99 5.99 7.99

Grade 2 metal. Thread Length Size 1/4"- 20 36" 5/16"- 18 36" 3/8"- 16 36" 3/8"- 16 120" 7/16"- 14 36" 1/2"- 13 36" 1/2"- 13 120" 5/8"- 11 36" 5/8"- 11 120" 3/4"- 10 36" 1"- 8 36"

COUPLING NUTS

Wt. (lbs.) 0.4 0.6 0.9 2.9 1.0 1.6 5.3 2.3 8.3 3.7 6.5

ITEM

PRICE

8001852 8001853 8001855 8001856 8001857 8001858 8001859 8001860 8001861 8001862 8001863

1.49 1.69 1.99 4.79 2.49 2.99 8.99 5.99 13.99 7.99 11.99

Thread Size Wt. (lbs.) 1/4"- 20 UNC 0.1 5/16"- 18 UNC 0.1 3/8"- 16 UNC 0.1 1/2"- 13 UNC 0.1 5/8"-11 UNC 0.3 3/4"- 10 UNC 0.4 1"- 8 UNC 0.4

ITEM 3860434 3860442 3860459 3860483 3860491 3860509 3860657

PRICE 0.19 0.41 0.49 0.99 2.10 3.16 3.11

HARDWARE KITS

THREADED ROD

PULLEYS

B) DBLE RIGID

A) SINGLE RIGID

PULLEYS Type

Size

2 pack 2 pack 2 pack single pack single pack single pack single pack single pack

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 1-1/2" 2"

Wt. (lbs.) 0.1 0.2 0.2 0.2 0.2 0.5 0.4 0.7

ITEM

PRICE

8003206 8003215 8003224 8003233 8003242 8003251 8003313 8003322

1.99 2.29 3.49 2.29 2.49 4.99 5.29 6.99

C) SINGLE SWIVEL

B Type

Size

2 pack 2 pack 2 pack single pack single pack single pack

1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

Wt. (lbs.) 0.1 0.1 0.2 0.3 0.3 0.5

ITEM

PRICE

8003331 8003340 8003359 8003368 8003377 8003386

2.49 2.59 3.99 2.59 2.49 4.49

PULLEY BLOCKS

FIXED GABLE Sheave Dia. 1-1/2" 2" 2-1/2" 3" 3-1/2"

Max. Cable Size 3/16" 3/16" 1/4" 1/4" 5/16"

Cap. Wt. (lbs.) (lbs.) 420 480 550 650 1,250

0.5 0.7 1.0 1.2 1.8

ITEM

PRICE

3801479 3801487 3801495 3801503 3801511

8.99 12.99 15.99 19.99 26.99

• All steel, bright zinc plated for maximum corrosion resistance • Oil impregnated bronze FIXED FLANGE bushings • “Hairpin” clip allows Wt. ITEM PRICE the sheave to be (lbs.) removed easily for 0.3 3801529 7.99 rigging 0.6 3801537 9.59 Do not mount “flange” 0.9 3801545 12.99 units with wood screws. Use #10 machine bolts and nuts.

SWIVEL EYE Sheave Max. Cable Dia. Size 1-1/2" 3/16" 2" 3/16" 2-1/2" 1/4" 3" 1/4" 3-1/2" 5/16"

Cap. (lbs.) 420 480 550 650 1,250

Wt. (lbs.) 0.5 0.8 1.1 1.2 1.9

SHEAVES with BUSHINGS

ITEM

PRICE

3801420 3801438 3801446 3801453 3801461

14.49 15.99 19.99 22.99 34.99

Wt. (lbs.) 0.2 0.4 0.6 0.6 0.8

ITEM (* 5/16" bore) 3801578* 3801586* 3801594* 3801602* 3801610*

PRICE 5.49 6.99 9.99 11.99 14.99

FENCING HARDWARE/PULLEYS

PULLEY BLOCKS • Ball bearing construction with pressure grease fittings • All connections of quality drop forged steel • Shell construction prevents rope from lodging between sheave and shell • Wire rope will not lose position in block even when slack Size Safe Working Load Wire Rope Capacity Wt. (lbs.) 4" 1.5 tons 1/4" to 5/16" 5.2 5" 1.7 tons 5/16" to 7/16" 9.0 6" 2.2 tons 3/8" to 1/2" 15.8

ITEM 3800100 3800101 3800102

PRICE 34.99 39.99 54.99

HEAVY DUTY SNATCH BLOCKS Cap. (tons) 1 3

O’all. Outside Outside Inside Wt. length Dia. Width Width (lbs.) ITEM PRICE 12-1/3" 4-1/2" 1" 5/8" 6.8 3800109 44.99 19-1/4" 6-3/4" 1-5/8" 1-1/8" 23.4 3801958 69.99

REPLACEMENT SHEAVES Cap. (tons) Size Wt. (lbs.) 1 Ton 4" 2.7 2 Ton 5" 5.2 3 Ton 6" 7.6

ITEM 3850781 3850799 3850807

PRICE 14.99 19.99 24.99

SOLID SNAP HOOKS A A) BRONZE SWIVEL EYE TRIGGER Eye Snap O’all Wt. PRICE Size Opening Length (lbs.) ITEM (ea.) 1/2" 1/2" 2-3/8" 0.1 3809498 2.79

B Nickel plated. C) SWIVEL EYE

B) BRASS SWIVEL EYE Eye Snap O’all Wt. PRICE Size Opening Length (lbs.) ITEM (ea.) 5/8" 3/8" 3-1/4" 0.1 3809506 2.99 3/4" 1/2" 3-3/4" 0.2 3809514 3.69 7/8" 5/8" 4-9/16" 0.3 3809522 4.99

Eye Snap Size Opening 5/8" 5/16" 3/4" 5/16" 1-1/8" 1/2"

C O’all Length 3-1/8" 3-1/4" 4-1/8"

Wt. (lbs.) 0.1 0.1 0.2

ITEM PRICE (ea.) 3801727 1.99 3801735 1.49 3801743 1.99

ZINC PLATED SECURITY SNAP LINK HOOK

D) DOUBLE EYE Snap Opening 3/8" 1/2"

O’all Wt. ITEM PRICE Length (lbs.) (ea.) 4-1/2" 0.1 3801750 1.99 3-1/2" 0.1 3801768 1.99

E) SWIVEL EYE with SPLIT KEY RING Eye of O’all Wt. Snap Length (lbs.) 5/8" 3-1/2" 0.1

ITEM 3801792

PRICE (ea.) 1.99

PANIC SNAP 1/2" x 4". 3800415 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

Snap O’all Opening Length 5/16" 2" 3/8" 2-3/8" 3/8" 3-1/4" 1/2" 3-1/4" 4-1/2" 5-1/2"

Wt. (lbs.) 0.1 0.1 0.2 0.3 0.4 0.6

ITEM

PRICE

3802642 3802659 3801800 3801818 8005975 8005976

0.99/ea. 0.99/ea. 1.39/ea. 1.99/ea. 1.99/ea. 2.49/ea.

CARABINER KEYCHAIN

• Aluminum construction • 3" long with key ring 3800231 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . .

149/ea.

PULLEYS

PACKAGED ROPE POLY-FILLED CAMO ROPE

A B A) POLYPROPYLENE TWISTED ROPE

1/4" dia. x 50 ft. 8128944 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

Size Wt. (lbs.) 1/4" x 50 ft. 0.5 1/4" x 100 ft. 1.2 3/8" x 50 ft. 1.5 3/8" x 100 ft. 2.7 3/4" x 50 ft. 5.8

ITEM PRICE 8003075 2.99/pkg. 8003076 5.99/pkg. 8003080 5.99/pkg. 8003081 13.99/pkg. 8016390 21.99/pkg.

B) NYLON ROPE Size Wt. (lbs.) 1/4" x 50 ft. 0.6 1/4" x 100 ft. 1.6 3/8" x 50 ft. 1.4 49 3/8" x 100 ft. 2.7

ITEM PRICE 8003077 6.49/pkg. 8003078 12.99/pkg. 8003165 17.99/pkg. 8003166 31.99/pkg.

GREY TWINE

2 mm dia. x 1,800 ft. 8120008 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

GALVANIZED CABLE • Excellent for winching, towing, etc. • Flexible pre-formed 7 x 19 construction (5/32" to 3/8" dia.) • 1/8" cable is 7 x 7 construction • 1/2" cable is 6 x 9 construction 50 FT COIL

Dia. 1/8"** 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"*

Breaking Strength 2,000 lbs. 2,800 lbs. 4,200 lbs. 7,000 lbs. 9,800 lbs. 14,400 lbs. 23,600 lbs.

Wt. (lbs.) 1.3 2.1 3.0 5.9 8.3 12.5 20.8

100 FT COIL

150 FT COIL

ITEM

Wt. PRICE (lbs.)

ITEM

Wt. PRICE (lbs.)

ITEM

PRICE

3820049 3821048 3821063 3821089 3821113 3821147 3821170

8.49 2.9 8.99 3.8 10.99 6.2 14.99 10.9 19.99 16.7 29.99 24.8 49.99 –

3820048 3821055 3821071 3821097 3821121 3821154 –

16.99 4.0 16.99 6.3 19.99 9.3 29.99 15.9 – 39.99 – 59.99 – –

3820050 3820051 3820052 3821105 – – –

24.99 24.99 32.99 45.99 – – –

GALVANIZED CABLE BY THE FOOT Electro galvanized finish. (7 x 7) 1/8" 3800378 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . (7 x 19) 3/16" 3800379 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

19¢/ft. 29¢/ft.

(7 x 19) 3/16" PVC COATED TO 1/4" 3800381 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . (7 x 19) 1/4" 3800382 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

39¢/ft. 39¢/ft.

WIRE ROPE THIMBLES & CLIPS U-BOLT

DEAD PART

A) THIMBLE

B) CLIPS LIVE PART BASE Wire rope clips are ideal for forming a loop. • Do not over tighten first and last clips • Properly attached, they could reach an efficiency of 85% • Both nuts on each clip should be tightened to the same degree • All clip bases must rest against the “live” part of the rope, the U-bolt against the “dead” part • For 1/8" to 1/2" cable – a minimum of 3 clips is recommended A) WIRE ROPE THIMBLES – PACKAGE OF 2 Size Wt. (lbs.) ITEM PRICE 1/8" 0.1 8009177 0.99/pkg. 3/16" 0.1 8009201 0.99/pkg. 1/4" 0.1 8009227 1.09/pkg. 5/16" 0.1 8009235 1.19/pkg. 3/8" 0.1 8009243 1.29/pkg. 7/16-1/2" 0.2 8009250 1.39/pkg.

B) WIRE ROPE CLIPS – PACKAGE OF 2 Size Wt. (lbs.) ITEM PRICE 1/8" 0.1 8009268 1.19/pkg. 3/16" 0.1 8009276 1.49/pkg. 1/4" 0.2 8032831 1.49/pkg. 5/16" 0.3 8032849 1.59/pkg. 3/8" 0.4 8032856 2.29/pkg. 7/16-1/2" 0.7 8032864 3.49/pkg.

ROPE & ACCESSORIES

WIRE ROPE SLEEVES

STUB END TURNBUCKLES

Aluminum sleeves can be used to make eyes or lap stitches in wire rope. Wt. 0.1 lbs.

Rope Size # of Pieces 3/32" 10 1/8" 6 5/32" 6 3/16" 4 1/4" 2

ITEM 8009060 8009094 8009136 8009151 8009169

PRICE 2.49/pkg. 2.49/pkg. 2.99/pkg. 3.49/pkg. 2.99/pkg.

QUICK LINKS

• Time saving connector for chain connections, sling chains, tire chains • Tested for safe working loads • Galvanized for rust protection • Versatile, reliable and easy to install LxW (in.) 2x1 2-1/4 x 1-1/8 3 x 1-1/2 3-5/8 x 1-3/4 3-7/8 x 1-7/8

Size 3/16" 1/4" 5/16" 3/8" 7/16"

• Material: Drop forged carbon steel hook, zinc plated • Safety latch • 40" 3/8" steel cable with PVC coating, loop ended • Cap.: 6,500 lbs 8103608 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . .

1699

www.princessauto.com Wt. (lbs.) 0.1 0.1 0.2 0.3 0.4

Safe Working Load 660 lbs. 880 lbs. 1,760 lbs. 2,200 lbs. 2,460 lbs.

ITEM

PRICE

3800289 3800290 3800291 3800292 3800293

1.09 1.19 1.59 2.19 2.79

• Forged steel quenched and tempered • Heavy duty galvanized • U.S. specification 77-T-791

A C B

Wt. (lbs.) 0.8 1.5 1.9

2 PC SAFETY CABLES

Sign-up to receive E-mail notification of our upcoming promos at:

TURNBUCKLES

Dia. x Take-up 3/8" x 6" 1/2" x 6" 1/2" x 9"

• Forged steel quenched and tempered • Heavy duty galvanized • U.S. specification 77-T-791 • 6" take-up Safe Wt. Dia. Working Load (lbs.) ITEM PRICE 5/8" 3,500 lbs. 2.1 3800370 9.99 3/4" 5,200 lbs. 3.3 3800371 14.99

B) EYE x EYE Safe Working ITEM Load 1,200 lbs. 3800358 2,200 lbs. 3800361 2,200 lbs. 3800363

A) HOOK x HOOK Safe Working Load 1,000 lbs. 1,500 lbs. 1,500 lbs.

PRICE 6.99 8.99 11.99

ITEM

PRICE

3800357 3800360 3800351

6.99 7.99 9.99

C) JAW x JAW Safe Working Load 1,200 lbs. 2,200 lbs. 2,200 lbs.

ITEM

PRICE

3800359 3800362 3800365

8.99 9.99 13.99

HIGH TENSILE SCREW PIN ANCHOR SHACKLES

a c

Shackle Pin Size Dia. (a) (b) 3/16" 1/4" d 1/4" 5/16" 5/16" 3/8" 3/8" 7/16" • Body C 1045 forged 7/16" 1/2" carbon steel 1/2" 5/8" • Breaking load 6 times safe 5/8" 3/4" working load 3/4" 7/8" • Alloy steel pins 7/8" 1" • Heavy duty galvanized body 1" 1-1/8" • Load rated b

Depth Throat Working Load Wt. (c) (d) (metric tons) (lbs.) ITEM PRICE 7/8" 1-1/8" 1-1/4" 1-1/2" 1-3/4" 1-7/8" 2-1/4" 2-3/4" 3-1/2" 3-3/4"

5/16" 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1-3/16" 1-1/2" 1-3/4"

1/3 1/2 3/4 1 1-1/2 2 3-1/4 4-3/4 6-1/3 8-1/2

0.1 0.1 0.2 0.3 0.5 0.7 2.1 2.4 3.7 5.2

3800347 3800386 3800387 3800388 3800389 3800390 3800391 3800392 3800393 3800394

1.29 1.39 1.59 1.99 2.39 3.29 5.49 7.99 11.99 16.99

Wondering how much effort it’ll take to lift your load? Divide the weight of the load by the number of pulleys in your hoist. Example: To lift a 1,000 lb. load using a hoist containing 7 pulleys, you would have to exert enough effort to move 142.9 lbs.

• Heat treated forged carbon steel • Yellow zinc coated Grade 70 alloy steel Safe Working Load 1/4"-5/16" 4,700 lbs. 3/8" 6,600 lbs. 7/16"-1/2" 11,300 lbs. Size

Wt. (lbs.) ITEM PRICE 0.4 3804580 3.99 0.5 3804598 4.99 1.2 3804572 6.49

GRADE 70 TRACTOR TOW HOOK

• Working load: 1,200 lbs. • Breaking strength: 4,500 lbs. • a=3/4" pin, b=5/8" throat 8017852 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1899

GRAB and SLIP HOOKS

Working Size SafeLoad 1/4" 1,950 lbs. 5/16" 2,875 lbs. 3/8" 4,000 lbs.

Wt. (lbs.) 0.5 0.8 1.3

C) GRADE 70 GRAB HOOK • Alloy steel, yellow zinc coated • Heat treated

A) GRADE 30 SLIP HOOKS Galvanized, forged carbon steel. ITEM PRICE 3800059 3800067 3800075

2.29 2.49 4.39

B) GRADE 30SLIP HOOKS with LATCH Working Wt. Size SafeLoad ITEM PRICE (lbs.) 1/4" 1,950 lbs. 0.5 3800337 3.49 5/16" 2,875 lbs. 0.9 3800338 4.49 3/8" 4,000 lbs. 1.4 3800339 6.49 1/2" 6,500 lbs. 3.1 3800340 13.99 C) GRADE 43 GRAB HOOK Galvanized, forged carbon steel. Working Wt. Size SafeLoad ITEM PRICE (lbs.) 1/4" 2,600 lbs. 0.4 3800000 2.29 5/16" 3,900 lbs. 0.7 3800018 2.59 3/8" 5,400 lbs. 1.0 3800026 3.49

CHAIN & ACCESSORIES

TWIN CLEVISES

TECH TIPS

Safe Working Load 1/4" 3,600 lbs. 5/16" 5,400 lbs. 3/8" 7,500 lbs. Size

Wt. (lbs.) 0.4 0.8 1.1

ITEM

PRICE

3800343 3805371 3805389

3.49 4.59 5.29

A) GRADE 70 SLIP HOOKS • Alloy steel, yellow zinc coated • Heat treated Working Wt. Size SafeLoad ITEM PRICE (lbs.) 1/4" 2,750 lbs. 0.6 3800344 3.29 5/16" 4,300 lbs. 0.8 3800345 4.29 3/8" 5,250 lbs. 1.3 3800346 5.29 D) GRADE 70 GRAB HOOKS with LATCH Working Size SafeLoad 1/4" 3,600 lbs. 5/16" 5,400 lbs. 3/8" 7,500 lbs.

Wt. (lbs.) 0.6 1.0 1.4

ITEM

PRICE

3800631 3800632 3800633

4.49 5.49 6.49

Working Load (Metric tons)

Eye Dia.

SOLID

3/4 1 1-1/2 2 3

3/4" 29/32" 1-1/8" 1-3/16" 1-1/2"

SWIVEL

EYE HOOKS

3/4 1 1-1/2 2 3

15/16" x 1-1/4" 1-5/16" x 1-1/2" 1-5/8" x 1-3/4" 1-9/16" x 1-3/4" 1-3/4" x 2"

O’all Wt. Length (lbs.) ITEM PRICE • Forged carbon steel, 4-1/2" 0.5 3800283 3.49 quenched and tempered 5" 0.8 3800284 4.49 • Complete with spring latch 5-1/2" 1.4 3800285 6.49 • Ultimate load: 5 times 6-3/8" 2.1 3800286 7.49 working load 8" 3.8 3800287 11.99 5-7/8" 6-1/2" 7-1/2" 8-1/2" 9-1/2"

0.8 1.4 2.4 2.8 5.4

3800330 3800332 3800333 3800335 3800336

4.99 7.49 9.99 11.99 17.99

• Forged carbon steel, quenched and tempered • Ultimate load: 5 times working load

CHAIN & ACCESSORIES

COIL CHAIN

GRADE 30 HOT DIPPED GALVANIZED High quality rust resistant coating. Working Size SafeLoad 3/16" 800 lbs. 1/4" 1,300 lbs. 5/16" 1,900 lbs. 3/8" 2,650 lbs.

GRADE 30 SELF-COLOURED CHAIN Working Wt. Size SafeLoad (lbs.) 3/16" 800 lbs. 0.4 1/4" 1,300 lbs. 0.7 5/16" 1,900 lbs. 1.1 3/8" 2,650 lbs. 1.4

ITEM

PRICE

3805876 3805884 3805892 3805900

0.99/ft. 1.29/ft. 1.99/ft. 2.29/ft.

GRADE 70 CHAIN Rust resistant yellow chromate finish. Working Wt. Size SafeLoad (lbs.) ITEM PRICE 5/16" 4,700 lbs. 1.0 8203812 2.49/ft. 3/8" 6,600 lbs. 1.4 8203820 2.79/ft.

Wt. (lbs.) 0.4 0.7 1.1 1.3

ITEM

PRICE

3800498 3800499 3800500 3800501

1.19/ft. 1.69/ft. 2.49/ft. 2.79/ft.

GRADE 30 ELECTRIC GALVANIZED CHAIN Bright finish with increased rust resistance. Working Wt. Size SafeLoad (lbs.) 3/16" 800 lbs. 0.4 1/4" 1,300 lbs. 0.7 5/16" 1,900 lbs. 1.1 3/8" 2,650 lbs. 1.5

ITEM

PRICE

3804770 3804788 3800495 3800496

1.19/ft. 1.49/ft. 1.79/ft. 2.99/ft.

HEAVY DUTY RATCHET HOISTS

RATCHET STRAP HOIST

• 4,000 lb. pulling cap. • Polyester web strap: 12 ft. x 1-1/16" • Not recommended for lifting 1580869 – Wt. 7.4 lbs. . . . . . . . . . . . . . . . . . .

• 3-hook style • Double gear construction 2-TON Lift weight: 2,000 lbs., pull weight: 4,000 lbs. 8006441 – Wt. 9.3 lbs. . . . . . . . . . . . . . . . . . . 4-TON Lift weight: 4,000 lbs., 99 pull weight: 8,000 lbs. 8006442 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . .

2499 3999

LOADBINDERS

D B

C) HEAVY DUTY LOADBINDER • Use with 5/16" or 3/8" chain • Working weight limit: 5,400 lbs. A) SMALL LOADBINDER • Breaking strength: 19,000 lbs. • Use with 3/16" to 1/4" chain • Special heavy duty model with 2 swivels • Safe working load: 375 lbs. • Hot drop forged steel, heat treated throughout • Breaking strength: 1,250 lbs. for max. strength and durability • Lever length: 7-1/2" • Non-spread design,clevis pins in handle slot • A lightweight fastener design for use on truck • Special forged steel hook, racks and boat trailers electric-welded links • Open spread 9", take-up 2-3/4" 99 99 3800778 – Wt. 7.9 lbs. . . . . . . . . . . . . . . . . . . . 3800752 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . D) RATCHET LOADBINDER B) LOADBINDER • Use with 5/16" or 3/8" chain • Use with 5/16" or 1/4" chain • Working weight limit: 5,400 lbs. • Working weight limit: 2,600 lbs. • Breaking strength: 7,800 lbs. 99 99 • Breaking strength: 19,000 lbs. 3800031 – Wt. 10.0 lbs. . . . . . . . . . . . . . . . . . . 3800030 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . .

FENCE ENERGIZERS #C4465 – 115 VAC ECONOMY 12VDC YELLOWJACKET • Charges over 15 miles of • Charges up to 10 miles clean fence of clean fence • Digital timing • 0.25 joule output @ 400 ohms • Fuseless design for improved (0.28 stored joules) lightning protection • Low impedance • Charges over 15 miles of clean fence • 3 battery options: 4 “D” cells, 6V, • Controls most animals or 12V external • Suitable for clean fences or light weeds only • Built in ground rod and fence wire strap • Lamp flashes when system is operating • 3-position switch for maximum power or • Vented, weather resistant, battery saver mode non-conductive cabinet • Portable and easy to use • Moisture resistant internal components 99 2430078 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . 2430077 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . .

12999

FENCE ENERGIZER

• 115 volt, 60 cycle, AC input/output • Charges up to 2 miles of clean fence • Continuous shock on fence: 1,000 volts @ 4 mA • Use for containing short-haired livestock and small animals • Fence OK light stays on while fencer operates • Use on weed free fences • Most effective in dry weather • Sealed plastic cabinet 99 8077539 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CHAIN & ACCESSORIES

FENCING

FENCE ENERGIZERS

B A PARMAK LOW IMPEDANCE FENCE ENERGIZERS • Laser trimmed computer precision, solid-state circuitry provides a powerful low impedance shock through wet weeds and bush • Built-in performance meter • Ideal for high tensile single or multi wire fence • Fuse protection A) 115 VAC HORSE SURROUND • Charges up to 5 miles of clean fence • 1.6 joule rating • Dual flashing operation light • Designed for an effective, safe shock to quickly control horses • Ideal for small to medium pastures 99 2430084 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . B) 12 VDC MAGNUM 12 U.O. • Charges up to 30 miles of clean fence • 0.87 to 2.7 joule rating • Use with 12 volt battery • Performance meter shows fence condition • Shocks through wet weeds and brush 99 2430083 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . C) MARK 7 – 115V • Charges up to 30 miles of clean fence • Rated for up to 6 joules • Ideal for short and medium fence lengths 99 2430020 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . D) SUPER ENERGIZER-4 – 115V • Charges over 50 miles of clean fence • Rated for up to 9 joules • Has built in digital performance meter • Ideal for large pastures 99 2430021 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . .

109 134

159

E) 6 VDC SOLAR-PAK • Charges up to 25 miles of clean fence • 0.169 to 1.4 joule rating • Will operate 21 days in total darkness • Includes sealed rechargeable battery • Performance meter shows fence condition • Shocks through wet weeds and brush 99 2430082 – Wt. 19.6 lbs. . . . . . . . . . . . . . . . . F) RANGE MASTER FENCE ENERGIZER • Charges over 100 miles of fence • Low impedance, over 12.5 joules • Audible and visible shut down alarm sounds when fence charger is not functioning properly • Rugged high impact ABS housing • For indoor installation 99 8003663 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . G) 12 VOLT SOLAR POWERED FENCE ENERGIZER • Charges up to 30 miles of fence • Low impedance for max power and longer life • Performance meter shows condition of fence • Sealed 12V rechargeable battery included • Weather proof, outdoor model 99 8027208 – Wt. 26.3 lbs. . . . . . . . . . . . . . . . . .

214

339

389

FENCING PRODUCTS

ELECTRIC FENCE WIRE

• PVC coated fibreglass construction for greater strength, less stretch • Highly conductive/low resistance aluminum conductors • Fire and UV resistant Description Length Color Poly-wire 656 ft. (200 m) Yellow/Black Poly-wire 656 ft. (200 m) White A Poly-wire 1,312 ft. (400 m) Yellow/Black Poly-wire 1,312 ft. (400 m) Yellow/Black 1/2" High Visibility tape 656 ft. (200 m) Yellow/Black 7/8" Equi-tape 492 ft. (150 m) Yellow/Black B 1-1/2" Equi-tape 200 ft. (61 m) White

16 17

Spool Wt. (lbs.) ITEM PRICE Cardboard 2.6 2430079 22.99/roll Cardboard 2.5 2430023 24.99/roll Cardboard 5.2 2430080 42.99/roll Reel Easy 5.7 2430024 49.99/roll Reel Easy 5.8 2430026 56.99/roll Reel Easy 8.2 2430027 69.99/roll Reel Easy 3.1 2430028 49.99/roll

D) GALVANIZED WIRE • 200,000 lbs. tensile strength • 1,417 lbs. breaking strength

C) ALUMINUM WIRE Gauge

Wt. PRICE (lbs.) ITEM 1,312 ft. (400 m) 5.9 2430029 29.99/roll 1,312 ft. (400 m) 4.1 2430030 29.99/roll Length

Wt. 14.3 lbs.

Gauge Length ITEM PRICE 16 1,312 ft. (400 m) 2430066 33.99/roll 14 1,312 ft. (400 m) 2430065 49.99/roll

SPLICING SLEEVES

INSULATED FENCE CABLE

Wire Size • 50 ft./15 m spool • Rated to 20,000 volts • For use underground to connect fence wire between gate openings 2430013 – Wt. 1.6 lbs. . . . . . . . . . . . .

1799

Wt. PRICE Qty. (lbs.) ITEM /pkg.

10 x 11 ga. smooth and 14-1/2 x 15-1/2 ga. barbed 10 14-1/2 x 15-1/2 ga. smooth 20 12-1/2 ga. smooth 25

0.2 2430049 5.99 0.1 2430050 5.99 0.1 2430048 5.49

FENCE TESTER

INSULATOR TUBING

• 50 ft. roll • Black polyethylene tubing fits up to 12-1/2" gauge fence wire 8005455 – Wt. 0.9 lbs. . . . . . . . . . . . .

5 lights glow in sequence to indicate approx. voltage from 1,000 volts to 5,000 volts. 99 2430016 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FENCE POSTS E F

E) YELLOW “BIGFOOT” STEP-IN POST • Non-conductive poly construction • 10" steel spike • 48" long • 9 wire holders 2430008 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . F) FIBREGLASS STEP-IN POST • 44" long • High visibility yellow 2430009 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

279 339

C F

FENCING PRODUCTS

A) PKG OF 25 INSULATORS FOR WOOD POSTS • Holds wire 2-1/8" from post • Nails included 69 /pkg. 2430034 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . B) PKG OF 10 EXTENDED INSULATORS FOR WOOD POSTS • Holds wire 5" from post • Nails included 79 /pkg. 2430035 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . C) PKG OF 25 INSULATORS FOR WOOD AND ROUND POSTS • Insulator only • Can be used on round posts by using “J” bolts (not included) 39 /pkg. 2430038 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . D) PKG OF 25 INSULATORS FOR WOOD POSTS • For use with poly tape up to 1-1/2" wide • Holds wire 2" from post • Nails included 49 /pkg. 2430040 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . E) PKG OF 25 INSULATORS FOR WOOD POSTS • Designed for high tensile fencing • Nails included 49 2430045 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . /pkg. F) PKG OF 25 INSULATORS FOR ROUND POSTS • Fits 1/4" to 9/16" dia. and 5/8" fibreglass “T” posts • Holds wire 1" from post 99 /pkg. 2430033 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . G) PKG OF 10 CORNER AND END INSULATORS Suitable for high tensile fencing. 99 2430039 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . /pkg.

ELECTRIC FENCE INSULATORS

8 8 4 6

H) PKG OF 25 T POST INSULATORS • Fits 1.25 and 1.33 lb./ft. T posts • Holds wire 1" from post 49 2430036 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . /pkg. I) PKG OF 25 SCREW TITE FENCE INSULATORS • Screw tight for sucker rod, fits 1/4"-3/4" dia. • Will hold wire, poly wire, and poly tape to 1-1/2" 99 8014249 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . /pkg.

GATE HARDWARE J) GATE WHEEL • Allows gate to open and close with ease • Prevents gate sag • Fits round tube gates 1-5/8" to 2" O.D 99 8212896 – Wt. 5.0 lbs. . . . . . . . . . GATE LATCHES • Latch will release to allow gate to swing in either direction. • Designed to accept padlock K) 1-1/4" x 1 1/2" O.D. 99 8212854 – Wt. 4.8 lbs. . . . . . . . . . . . . L) 1-5/8" x 2" O.D. 99 8212904 – Wt. 4.8 lbs. M) ADJUSTABLE GATE CLOSER • Heavy duty cable will adjust to fit most posts • Designed to accept a padlock • Powder coated resistant finish 99 8212946 – Wt. 5.0 lbs. . . . . . . . . . N) GATE ANCHOR • Holds livestock gate open in any position • Helps prevent gate end from swinging and sagging • Round tube gates 1-3/4" to 2" O.D. 99 8212870 – Wt. 3.9 lbs. . . . . . . . . . O) 1-5/8" GATE HINGE 99 8212912 – Wt. 2.5 lbs. . . . . . . . . . . . . . . P) 2" GATE HINGE 99 8212920 – Wt. 6.0 lbs. . . . . . . . . . . . .

24 21

L M

16 9 16

N O

FARM

FENCING TOOLS

A) GATE HANDLES 3-1/2" spring. RED PLASTIC GRIP 99 2430032 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . YELLOW RUBBER GRIP 39 2430031 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . B) GROUND CLAMP Fits 1/2" to 1" dia. ground rods. 49 2430056 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . C) PULSE CONNECTORS • For 1/2" to 1-1/2" poly tape • 2 per package • Use to connect charger to polytape or polywire may also be used as an end clamp or to fasten tape to gate handle 99 8087694 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 2 WAY GATE ANCHOR 99 2430017 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

1 3

C B

3 4

F G H

E) WIRE STRAINER For high tensile fence wire. 8034035 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . F) TENSION MEASURING SPRING 2430054 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . G) WIRE STRAINER HANDLE For use with 8034035 above. 2430053 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

449 799 749

H) FENCING WIRE CLAMP • Designed to use with a puller to stretch wire • The harder the pull the stronger the grip • Works with barbed, smooth or insulated wire from 1/16" to 1/4" dia. 99 1580117 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . I) FENCE STRETCHER AND SPLICER 99 8212979 – Wt. 8.4 lbs.

19 39

J) 10-1/2" FENCE TOOL • Head has striking face, staple removing hook pincer, and clamp on top jaw • Grips for straining, twisting, and cutting wire • Features cushion grip handles 2921237 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . K) WIRE CUTTER Specially designed jaws made to cut 12-1/2 ga. high tensile wire. 2430055 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . L) 20" MULTI-GROOVE CRIMPER For use with splicing sleeves. 8002154 – Wt. 5.6 lbs. . . . . . . . . . . . . . . . . . . . M) T-POST PULLER Easy, one man operation pulls the post straight out of the ground without bending or twisting. 8212987 – Wt. 16.6 lbs. . . . . . . . . . . . . . . . . . .

1199

2999 4999

4499

K M

DIGGING TOOLS

DIGGING TOOLS SHOVELS

A B

A) SQUARE POINT SHOVEL 26" hardwood handle. 8218588 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . B) ROUND POINT SHOVEL 26" hardwood handle. 8218570 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . C) GENERAL PURPOSE SHOVEL • O’all length: 41" • Plastic coated steel handle • Blade: 9-3/4" x 12-1/2" 8024880 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . . . D) STEEL SCOOP • Powdered coated carbon steel • Blade/scoop size: 14" x14" • Handle length: 28" • O’all length: 44" 8024871 – Wt. 6.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

999 999 C

1299 D

1799

SHOVELS

• Fibreglass handle with solid hardwood core inserts • Heat treated steel heads with clear lacquer finish • 58" length shaft for long handle, 42" length shaft for short handle • 8" x 10" blade on square point heads • 8" x 11" blade on round point heads

E F G H

Wt. 3.5 lbs

E) 8167348 – ROUND POINT LONG HANDLE F) 8167363 – SQUARE POINT LONG HANDLE G) 8167389 – ROUND POINT D HANDLE H) 8167397 – SQUARE POINT D HANDLE . . . .

2199

ASSIST HANDLE • Plastic grip • Shaft cap.: 1" to 1-1/4" • For use with shovels, brooms, rakes, etc. 8061905 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

UTILITY CART

• Loading cap.: 660 lbs. • Body size: 38" x 20.2" x 10.8" • Steel mesh sides • Pneumatic tires: 3.50-4 • Auto style steering 8086787 – Wt. 56.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

POULTRY, LIVESTOCK & HORSE CARE

A) INFRA-RED BROODER LAMPS • Strong triple corrosion protected steel cap and reflector • Deep reflector is designed for improved bulb protection • 10 ft. grounded cord WITHOUT SWITCH 99 2470016 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . WITH SWITCH Energy saving hi/low/off switch 99 8041353 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . B) HEAT LAMP BULBS

FEEDERS & WATERERS HEAT LAMPS

19 29

Wt. 0.4 lbs.

0700268 – CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . 0700269 – RED . . . . . . . . . . . . . . . . . . . . . . . . . . . .

549 799

C) POULTRY REEL TOP FEEDER Galvanized metal construction. 24" LONG 99 2470099 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 2 GALLON GALVANIZED METAL WATER FOUNTAIN Double wall. 99 2470100 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . E) GALVANIZED FLOAT BOWL • Non-siphoning • Single plastic float and arm with brass valve for setting water level • Hinged cover for easy maintenance • Water line entry on both sides of bowl with 1/2" brass fitting • Bowls can be fitted back to back 99 2470105 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . . .

NYLON LARIAT

SOLID STATE CATTLE PROD

• Requires 2 “C” cell batteries (included) • 29" long 2470301 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

4999

• Custom made, tied, and pre-stretched BALE HOOK • Meets requirements of professional roper as well as working rancher • 7/16" x 30 ft. • “D” style handle • Medium 99 • O’all length: 13" 2470210 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . 8007202 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

ALL PURPOSE RUBBER TUBS

BUCKETS & SCOOPS 12 LITRE ALL PURPOSE RUBBER PAIL

F G

8007195 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

F) 10 LITRE 8131880 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . . . . . . F) 20 LITRE 8132037 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . . F) 30 LITRE 8132045 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . 99 G) 16 LITRE with HANDLES 8132060 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . .

999 1499 1999 1699

RODENT TRAPS A) WOOD AND METAL TRAP FOR MICE – PKG. OF 2. 49 2470113 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . /pkg. FOR RATS – PKG. OF 1. 59 2470115 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . /ea. B) RODENT TRAP O’all dim.: 9" x 5" x 5". 99 8159246 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . C) GOPHER TRAP • Safe and non-toxic, no poisons or gases • Easy to set 99 8006912 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . D) METAL MOUSE TRAP 99 2470114 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . .

1 2

11 15

FOAL HALTERS

TACK COTTON LEAD ROPES

• 3/4" double ply and stitched nylon • Nickel plated hardware • Adjustable noseband and throat strap Wt. 0.4 lbs.

2470214 – HUNTER GREEN 2470223 – RED 2470212 – BLUE 2470225 – BLACK . . . . . . . . . . . . . . . . . . . . . . .

POULTRY, LIVESTOCK & HORSE CARE

PEST CONTROL

649/ea

ROPE HALTER

• 3/4" x 10 ft. • Solid cotton • Nickel plated bull snap Wt. 1.3 lbs.

2470257 – HUNTER GREEN 2470253 – BLACK 2470254 – BLUE 2470248 – RED . . . . . . . . . . . . . . . . . . . . . . . . .

• No metal hardware • Back braided ends for extra strength • 800 to 1,100 lbs. 99 /ea. 8081572 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

DANITA BIGEAGLE Date of birth: Mar 06, 1984 Hair: Dark Brown Missing since: Feb 11, 2007 Eyes: Brown Missing from: Regina, Saskatchewan Note: Danita was last seen in the 800 block of Victoria Avenue at about 10:00 PM on February 11, 2007. HAVE YOU SEEN THIS CHILD?

1-800-387-7962

A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

All Calls Confidential—No Name Required 97

POULTRY, LIVESTOCK & HORSE CARE

DE-ICERS

All heated buckets, bowls and de-icers have a built-in thermostat to control the water temperature. It will turn ON at 1.5°C (35°F) and OFF at 7°C (45°F).

D A

B C

A) FLOATING DE-ICER • Economical floating de-icer for metal tank only • 1,000 watts 99 8079139 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . B) SUBMERSIBLE DE-ICER • Submergible plastic tank de-icer • 1,000 watts • Thermostatically controlled to operate only when necessary • Designed to rest in bottom of tank unnoticed by livestock • Protective sturdy cage permits use in all tanks • Safe in plastic 99 8079162 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . .

C) 1,250W FLOATING TANK DE-ICER • Thermostatically controlled • Durable construction; safe in plastic • Field tested to -23°C (-9°F) with 30 MPH wind 8017184 Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . .

4499

D) 1,500W SUBMERSIBLE TANK DE-ICER • Operates automatically only below 0°C (-32°F) • Operates efficiently at the bottom of tank • Safe in plastic; aluminum coated 8016210 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . .

6999

HEATED BUCKETS E

F) 19 LITRE (5 GAL) HEATED RUBBER BUCKET • Thermostatically controlled for efficiency • Field tested to -28°C (-18°F) 99 8019823 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . F) 64 LITRE (16 GAL) ALL PURPOSE HEATED TUB • Operates only when necessary • Unique heating design • Replaceable element hidden from animals • Easy grip handle for portability 99 8001031 – Wt. 10.0 lbs. . . . . . . . . . . . . . . . . . G) 20 LITRE (6 GAL) HEATED BUCKET • All season bucket • Cord hides away for summer use • Thermostatically controlled to operate only when necessary (on at 2° off, at 16°C) 99 99 8001029 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . .

G F

E) 8 LITRE (2 GAL) HEATED BUCKET • Thermostatically controlled for efficiency • Heavy duty pail with reinforced connectors • Table of measurements 8001030 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . .

HEATED PET DISHES

• Thermostatically controlled to operate only when necessary • Sturdy twin wall anti-tip construction • Heavy duty anti-chew cord protector 1 QUART CAP. 25 watts. 8134090 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . 1-1/2 GALLON CAP. 60 watts. 8079170 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

HEATED PET MATS

2499 2999

STAINLESS STEEL HEATED PET DISH

• Thermostatically controlled to operate only when necessary • Heavy duty anti-chew cord protector 40 WATTS 2.84 litres (3/4 gallon) cap. 8223067 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . 60 WATTS 6.5 litre (1-3/4 gallon) cap. 8179087 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . .

39 49

• Designed to automatically heat to your pets body temperature • Constructed of durable weather resistant high impact ABS plastic • Thermostatically controlled to operate only when necessary • Custom built-in red indicator light • Heavy duty anti-chew cord protector • Fully grounded 3-prong supply cord 13" x 19" 99 8223059 – Wt. 5.4 lbs. . . . . . . . . . . . . . . . . . . . 99 17" x 24" 99 8134108 – Wt. 5.4 lbs. . . . . . . . . . . . . . . . . . . . 24" x 29" 99 99 8171886 – Wt. 9.6 lbs. . . . . . . . . . . . . . . . . . . .

59 79 89

• Triple ply cheeks • 6 ring cinch type; brass plated hardware • Extra heavy duty double ply 1" premium grade nylon Size of horse Wt. (lbs.) BLUE RED BLACK DARK GREEN PRICE 500 to 800 lbs. 1.1 2470204 2470202 2470203 2470205 99 800 to 1,000 lbs. 1.1 2470208 2470206 2470207 2470209 1,100 to 1,600 lbs. 1.2 2470199 2470197 2470198 2470200

4 FT WHIP • Lightweight, well balanced fibreglass • Braided covers 2470238 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

GROOMING TOOLS A) PLASTIC COMB 9" polystyrene comb is good for mane and tail. 8170243 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . B) HOOF PICKS Nickel plated with vinyl coated handle.

B A D

59¢ C

Wt. 0.1 lbs.

8170193 – RED 8170219 – BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . C) ECONOMY CURRY COMBS Lightweight and flexible with adjustable hand strap.

F E

Wt. 0.2 lbs.

2470162 – RED 2470165 – BLACK 2470164 – GREEN 2470166 – BLUE . . . . . . . D) CURRY COMB Large rubber handle with soft round teeth. 2470154 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . E) JUNIOR BRUSH • 6-1/2" x 2-1/2", 1-1/2" medium stiff plastic bristles • Handy for touch ups

129 G

POULTRY, LIVESTOCK & HORSE CARE

“THE OLD TIMER” HALTERS

G) MANE CURRY COMB • 6 bars, closed back with a mane comb • Wooden handle 8170250 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . H) GROOMING BRUSH 8-1/4" x 2-3/4" with 1-3/4" long bristles.

Wt. 0.3 lbs.

8170276 – BLUE 99 Wt. 0.6 lbs 8170284 – RED . . . . . . . . . . . . . . . . . . . . . . . . . . . . Colour Soft PRICE F) SHEDDING BLADE Bristles • Fine tooth spring steel blade; use open or closed 8170292 RED 99 • Quickly removes matted hair 99 BLUE 8170318 8170268 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

Medium PRICE Bristles 8005264 99 8005265

SHOW SHEEN HAIR POLISH

SEWING AWL

• Labour saving “hair polish” dries to a bright, natural sheen that resists dust and stains • Non-sticky polish keeps manes and tails tangle free • Makes your animal shine and easy to maintain for up to a week • 950 ml 99 2470138 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . .

• Sew any heavy material • Comes with #8S and #8C needles and 1 refillable bobbin of coarse nylon thread • Includes 30 yards of replacement thread 8068660 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . COARSE STITCHING THREAD - 30 YARDS. 8109357 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

1499 299

FARRIER TOOLS I) RIGHT HANDED HOOF KNIFE Stainless steel with moulded plastic handle. 2470171 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . J) HOOF NIPPERS Drop forged with plastic coated handles. 2470183 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

399

2599

STAINLESS STEEL PRODUCTS

TACK & LEATHER CARE

A) ARCTIC DUBBIN – CONTAINS MINK OIL • Waterproofs leather subject to rugged outdoor use • Prevents the formation of salt stains 49 2470266 – 120 g . . . . . . . . . . . . . . . . . . . . . . . . . . . B) YELLOW SADDLE SOAP FOR LEATHER Cleans and lubricates to prevent brittleness. 99 2470170 – 340 g . . . . . . . . . . . . . . . . . . . . . . . . . . . C) NEATSFOOT OIL COMPOUND Softens and preserves all smooth leathers. 99 2470169 – 1 litre . . . . . . . . . . . . . . . . . . . . . . . . . . . D) HORSEMAN’S ONE STEP • Cleaning conditioner for harnesses and saddles • Contains a mild cleaning agent, lanolin, sanicide, and a fungicide 99 2470265 – 425 g . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 8

LIQUID CHEMICALS CANNOT BE SHIPPED

PERCOLATOR

STAINLESS STEEL PRODUCTS NON-SKID FEED DISHES

12 cup cap. 8127938 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . .

3199

STAINLESS STEEL SCOOP

SINGLE – 16 oz. 8127300 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . SINGLE – 64 oz. 8016363 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . DUAL 8119950 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . .

449 849 1899

GOLD MINERS TRAY

250 g 8127649 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

729

OVAL PANS O’all dim.: 14-3/4" x 2-3/4". 8178097 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

849

PAILS & BASINS O’ALL DIM.: 13" X 6-1/2" X 6" 8162497 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . O’ALL DIM.: 15" x 7" x 6-1/2" 8162505 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . E

Non magnetic, anti-rust.

100

1099 1399

MUGS H

Size

Wt. (lbs)

ITEM

PRICE

4 litre/3 qt. 9 litre/10 qt. 16 litre/17 qt.

1.0 1.9 2.4

2470318 2470305 2470306

9.99 19.99 29.99

F) BASINS 7 LITRE/7.5 QT CAP 8016381 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . 14.2 LITRE /15 QT CAP 8001608 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . .

G) 350 ML 8002634 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . H) DOUBLE WALLED MUG 99 O’all dim.: 5" x 4". 8162307 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . 49

8 18

399

1399

BIG DIPPER • Opening Dia - 5-1/2" • Bottom Spout - 2" 8137101 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

749 • 1.2 L capacity • Stainless steel 8202798 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

6 COMPARTMENT CARRY BOX

499

DIPPER

• 5 kg lift capacity • Stainless steel 8202681 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . .

1/2 litre cap. 8016372 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

349

1999 2 LITRE PITCHER

RIBBED BOWL • 5.4" dia. • 0.5 L capacity • Stainless steel 8202707 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

8077471 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . .

1599

CUTLERY HOLDERS

PLAIN BOWL • 4.3" dia. • 0.3 L capacity • Stainless steel 8202715 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . .

99¢ A

RUBBER BOTTOMED BOWL 2.7 LITRE (2.9 QUART) 8127326 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

A) SMALL 8202806 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . B) LARGE 49 8202814 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

STAINLESS STEEL PRODUCTS/MEAT PROCESSING

3 PC STAINLESS STEEL CANNING FUNNEL WITH SCREEN

399 599

SUNSHINE WOOD ALIAS: Sunny Date of birth: Hair: Brown Eyes: Brown Characteristics:

April 6, 1987 Missing since: Feb 20, 2004 Missing from: Winnipeg, MB Straight hair, tattoos on all fingers of her left hand HAVE YOU SEEN THIS CHILD?

A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

1-800-387-7962 All Calls Confidential —No Name Required

101

MEAT PROCESSING

MEAT PROCESSING MEAT MIXER

MEAT GRINDER • #32 plate size • Mounts on table, bench or counter • Cast iron construction with sanitary electro double tin plating • Easy to assemble, use and clean • Large hopper opening for loading of food • Includes 2 grinding plates, cutting knife, and sausage making tube 99 8078719 – Wt. 20.8 lbs. . . . . . . . . . . . . . . . .

ACCESSORIES A

• 4.2 gal. container holds 17 lbs. of meat • Easy to clean rust resistant stainless steel construction • Includes food grade plastic cover 8078362 – Wt. 16.2 lbs. . . . . . . . . . . . . . .

12999

INSULATED SMOKE HOUSE

B C

For #32 manual meat grinders and sausage stuffers. A) 3 PC SAUSAGE STUFFING TUBE KIT • 3 pc. plastic sausage stuffing tubes • 9/16", 3/4" and 7/8" 8144529 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . B) CUTTING KNIFE Carbon steel. 8144495 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . C) GRINDING PLATES Carbon steel.

199 199

• 4 hours of smoking to produce sausage • Embossed aluminum plate exterior with aluminum interior construction • Built-in heat preservation layer conserves electricity during operation 99 • Inside dimensions: 15" deep, 20" high, 161/2" wide • 120V, thermostatically controlled heating element 99 8078735 – Wt. 32.2 lbs. . . . . . . . . . . . . .

Wt. 0.7 lbs.

8144503 – 8 mm x #32 8144511 – 10 mm x #32 . . . . . . . . . . . . . . . . .

25" MEAT SAW

219

TABLE TOP SAUSAGE STUFFER • For use on any cut of meat • Trigger mechanism for blade tension control • Blades are dishwasher safe and resist bacterial contamination • Plastic handle for comfortable cutting 99 8113276 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . • O'all dim: Cylinder 8H x 4-7/8W REPLACEMENT BLADE for 8113286 • Base 9-1/2L x 6W Stainless steel blade. 8113326 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . 4.99 • Cylinder, canister and base plate made of heavy gauge stainless steel MEAT HOOKS • Dual speed gears • Includes 3 durable plastic stuffing tubes 8180077 – Wt. 10.5 lbs. . . . . . . . . . . . . . .

102

Stainless steel. SMALL – 7" Max. cap. 175 lbs. 8113037 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . LARGE – 9" Max. cap. 220 lbs. 8113045 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

11999

SPRING SCALE

399 99

• Aluminum housing with red anodizing stain • 320 lbs. max. cap. 99 8105496 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . .

GREEN • Mesh: 10 x 10, 1,000 denier • 2.9 oz/sq. yd. polyethylene • Coating: 40 micron both sides • Grommets: 3 ft. spacing, aluminum construction • Tear-resistant • Poly rope in hem • UV treated Cut Size (ft.) 5x7 6x8 8 x 10 10 x 12 10 x 16 12 x 16 12 x 20 12 x 24 12 x 36 15 x 20 18 x 24 20 x 30 24 x 30 30 x 40 30 x 50 30 x 60

Approx. Finished Size 4 ft. 6" x 6 ft. 6" 5 ft. 6" x 7 ft. 6" 7 ft. 4" x 9 ft. 6" 9 ft. 4" x 11 ft. 6" 9 ft. 4" x 15 ft. 6" 11 ft. 4" x 15 ft. 6" 11 ft. 6" x 19 ft. 3" 11 ft. 4" x 23 ft. 6" 11 ft. 6" x 34 ft. 6" 14 ft. 3" x 19 ft. 6" 17 ft. 3" x 23 ft. 6" 19 ft. 1" x 29 ft. 4" 23 ft. x 29 ft. 4" 29 ft. x 39 ft. 3" 29 ft. x 49 ft. 2" 29 ft. x 59 ft.

Wt. (lbs.) 0.7 0.9 1.7 2.6 3.4 4.0 4.9 5.5 7.9 6.2 8.9 12.8 15.4 26.6 32.7 40.2

ITEM

PRICE

2480853 2480309 2480291 2480325 2480333 2480341 2480048 2480861 2480049 2480042 2480043 2480366 2480045 2480046 2480655 2480047

3.99 5.49 7.49 9.99 14.99 16.99 21.99 25.99 38.99 27.99 38.99 54.99 69.99 99.99 129.99 169.99

SILVER • Mesh: 14 x 14, 1,000 denier • 5.4 oz/sq. yd. polyethylene • Coating: 50 micron both sides • Grommets: 2 ft. spacing, aluminum construction • Reinforced corners • Tear-resistant • Poly rope in hem • UV treated Wt. ITEM PRICE (lbs.) 1.2 2480037 6.49 1.6 2480038 7.49 2.6 2481018 12.99 3.8 2481026 18.99 5.2 2480039 23.99 6.3 2481034 27.99 7.7 2480040 36.99 8.8 2481042 41.99 13.2 2480041 61.99 9.3 2481059 42.99 13.4 2481067 62.99 18.8 2481075 84.99 22.1 2481083 109.99 41.2 2481091 169.99 49.2 2481109 199.99 57.3 2481117 239.99

TARPS & ACCESSORIES

TARPAULINS & ACCESSORIES

CANVAS TARPS • Reinforced triangular patches 4 layers thick at each eyelet with double stitched seams • Nylon rope in perimeter hem in sizes 12 ft. x 16 ft. and up • Grommets every 3 ft. around perimeter Cut Size Approx. Finished Size Wt. (lbs.) 6 ft. x 8 ft. 5 ft. 6" x 7 ft. 6" 5.7 9 ft. x 10 ft. 8 ft. 6" x 9 ft. 6" 9.6 10 ft. x 12 ft. 9 ft. 6" x 11 ft. 6" 11.7 10 ft. x 16 ft. 9 ft. 6" x 15 ft. 6" 15.5 12 ft. x 16 ft. 11 ft. 6" x 15 ft. 6" 20.8 12 ft. x 20 ft. 11 ft. 6" x 19 ft. 6" 25.8 15 ft. x 20 ft. 14 ft. 6" x 19 ft. 6" 31.4 18 ft. x 24 ft. 17 ft. 6" x 23 ft. 6" 43.7

MULTIPURPOSE TARPS

• Weight before treatment: 12 oz. sq/yd, after: 18 oz. sq/yd • Ideal for uses that require breathable fabrics to prevent rot or rust on objects • Tan in colour ITEM 8016489 8016522 8016531 8074627 8056916 8056925 8056943 8056952

PRICE 29.99 54.99 69.99 89.99 109.99 129.99 139.99 189.99

HAYSTACK TARPS TIE DOWNS NOT INCLUDED

• Silver on the outside to prevent light, black on the inside to prevent green housing • Super tough 6.2 oz/sq. yd. UV treated coated fabric • 12 x 12 UV treated mesh poly fabric • 1/4" polypropylene rope drawstring and handles • Eyelets and webbing set into 5 layers of fabric • 500 lbs. of pull strength • Ideal for yard clean-up, equipment covers, and • Special treatment for long outdoor life more 18 FT x 48 FT 6 FT x 6 FT MULTI-PURPOSE TARP 99 8004790 – Wt. 38.0 lbs. . . . . . . . . . . . . . . . . Finished size approx. 5 ft. 4" x 5 ft. 4". 99 25 FT x 48 FT 2480062 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 8004793 – Wt. 53.0 lbs. . . . . . . . . . . . . . . . . 9 FT x 9 FT MULTIPURPOSE TARP Finished size approx. 8 ft. 2" x 8 ft. 2". 99 33 FT x 48 FT 99 2480058 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . 8004788 – Wt. 68.0 lbs. . . . . . . . . . . . . . . . .

179 269 299

103

TARPS & ACCESSORIES

4 PC TARP GRABBER SET

WIND UP DUMP TRUCK TARP KIT

• Easy to install • 4 times stronger than brass grommets 8006271 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

10 PK TARP EYELETS • Self sealing eyelets for plastic or canvas sheeting • Snap together for easy installation • 7/16" I.D. 1-1/8" O.D. 8026218 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

299/pkg.

TARP TAPE

• 7 x 15 ft. heavy duty mesh tarp designed to fit 1 ton and super duty dump trucks • Extruded aluminum cross bars telescopes to fit bed width of dumps & trailers up to 102" • Cast bearings and zinc plated hardware • Folding crank handle with detent latch • 22 ft. pull rope included • Heavy duty double stitch hem • Hems reinforced with 2" heavy duty nylon webbing • Full perimeter brass grommets • Heavy duty UV resistant, 1,000 denier polyester with protective PVC coating 99 8184897 – Wt. 31.4 lbs. . . . . . . . . . .

249

REPLACEMENT TARP GEAR MOTOR • 2" wide x 35 ft. long • Sets in sunlight or heat • Fix rips and tears, reinforce stress points, join tarps Wt. 0.3 lbs.

8012848 – CLEAR 2480005 – BLUE 2480013 – GREEN 2480023 – BLACK 2480014 – SILVER 99 2480024 – WHITE . . . . . . . . . . . . . . . . . . . . . . /roll

30 PC ASSORTED BUNGEE CORDS

• 12 volt direct drive hi-torque motor • 3-1/8" extended output shaft • Forged, 90-tooth drive gear for more torque and extended life • Epoxy sealed gearbox maintains lubrication • Sealed drive shaft and encased bearing prevents contamination 99 8184913 – Wt. 12.7 lbs. . . . . . . . . . .

279

TARP REPAIR KIT

• 10 pcs of ea. size: 12", 18" and 24" • Hook material: #45 steel (anodized) • Max length: 24", 36", 48" • Comes in handy storage bucket 8191561 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . .

• Repair or install new grommets • Includes: punch, grommet installing tool, and fifty 1/2" brass plated grommets 2480663 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . 1/2" GROMMETS ONLY Pkg. of 50. 99 2480903 – Wt. 0.2 lbs. . . . . . . . . . . . . . . .

999/pkg. 549/pkg.

Royal Ser vice Promise.....

104

No sale is final until you're satisfied. If you are unhappy with any purchase, simply return it and we will repair, replace or refund your purchase.

B A

A) RUBBER TIE-DOWN STRAPS • Made from weather resistant EPDM rubber • Includes “S” hooks • Approx. 1/4" thick with 5/8" thick end blocks • Sizes listed are for strap only (add 4" for hooks) • Package of 5 Size Max. Safe Wt. ITEM PRICE Stretch (lbs.) 10" 15" 0.9 3800317 3.49/pkg. 15" 22" 1.2 3800318 3.89/pkg. 21" 32" 1.4 3800319 4.29/pkg. 31" 46" 1.8 3800320 5.99/pkg. 41" 61" 2.3 3800321 8.99/pkg.

C B) HEAVY DUTY TARP STRAPS • Stretch to 1-1/2 times their original size • Hooks add 4" to o’all strap length • Made of weather resistant EPDM rubber • 1/2" thick reinforced eyelets Size Wt. (lbs.) ITEM PRICE 9" 0.2 8060607 0.99 15" 0.2 8060616 1.29 20" 0.3 8060643 1.49 30" 0.3 8060652 1.99

20" ADJUSTABLE STRAP with HOOKS Holes every 5". 99 8057498 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . 30" ADJUSTABLE STRAP with HOOKS EXTRA “S” HOOKS Holes approximately every 7". 10 per package. 79 99 8012786 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . /pkg. 8008372 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . C) CAMOUFLAGE RUBBER STRAP 10 PC RUBBER TIE DOWN SETS • 20" adjustable strap Includes two 10", three 15", three 21", and • 2-1/2 times original length safe stretch length two 31" straps. 99 3809985 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . /set • Hooks add 4" to length • Made with weather resistant EPDM rubber Includes: four 10", three 15", and • 1/2" thick reinforced eyelets three 21" straps. 29 99 8085391 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . /set 8098030 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

TARPS & ACCESSORIES

TIE-DOWN STRAPS

12 PC BUNGEE TARP TIES

4 PC LOOP SETS D

• 4 each of 12", 18", and 24" long • Fixed ball on one end and adjustable hook on the other • Design allows hook removal for quick installation, and can be tightened to easily remove slack 99 /pkg. 3800479 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

199/set 299/set

BUNGEE CORDS & HOOKS

CAMOUFLAGE BUNGEE STRAPS • 24" high quality bungee cords with heat treated wire hooks and black vinyl coating • 10 pack 8078438 – Wt. 1.9 lbs. . . . . . . . . . . . . . . .

• 5-1/2" long • Stretch cord D) HOOK LOOP SET Vinyl covered metal hook. 3800050 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . E) BALL LOOP SET 3800051 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

1199/pkg.

INDUSTRIAL BUNGEE STRAPS • 10 mm • Made from high quality black cord with polyester fabric • Ends are made from heavy gauge wire • Yellow dichromate finish for a longer life than non finished hooks Length Wt. (lbs.) ITEM PRICE 0.3 13" 8078354 1.19 0.3 18" 8078388 1.29 0.3 24" 8078396 1.49 0.4 36" 8078412 1.99

I F) 6 PC HEAVY DUTY BUNGEE CORD KIT Sizes: 18", 24", 32", 48", 64", and 72" cords x 3/8" dia. 99 3800695 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . /pkg. G) 6 PC BUNGEE CORD KIT 2 each of 12", 18", and 24" cords x 1/4" dia. 49 3808722 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . /pkg. H) 5/16" BULK BUNGEE CORD ¢ 3809803 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . /ft. I) PLASTIC HOOKS FOR BUNGEE CORD ¢ 3809811 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . /ea.

4 49 49

105

DEEP WELL & JET PUMPS

WATER PUMPS & ACCESSORIES

JET PUMPS C

A) CONVERTIBLE JET PUMP WITH EJECTOR • Shallow well pump (max. 25 ft.) application requires the ejector to be mounted to front of the pump body as shown in picture • Deep well application requires ejector to be set in the well at desired pumping level • Totally enclosed fan cooled 1/2 HP, 115 volt motor with run capacitor and overload protection • Performance: SHALLOW WELL

DEEP WELL

648 GPH @ 5 ft. head 520 GPH @ 30 ft. head 439 GPH @ 15 ft. head 330 GPH @ 50 ft. head 223 GPH @ 25 ft. head 149 GPH @ 80 ft. head • Max. 60 PSI 99 5770078 – Wt. 34.6 lbs. . . . . . . . . . . . . . . . . . . . SHALLOW WELL JET PUMPS • Cast iron pump body is easy to prime • Totally enclosed fan cooled 1/2 HP, 115 volt motor with run capacitor and overload protection • Will lift water to a max. of 25 ft. (max. 60 PSI) Performance Head 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. GPH (US gal.) 715 630 575 500 450 B) PUMP with MOTOR 99 5770077 – Wt. 23.3 lbs. . . . . . . . . . . . . . . . . . . . C) PUMP with MOTOR & 6.6 GAL TANK 99 5770070 – Wt. 41.9 lbs. . . . . . . . . . . . . . . . . . . .

259

219 299

D) 3/4 HP STAINLESS STEEL JET PUMP • Electronic system eliminates the need for a conventional pressure tank • Maintains a constant pressure - no need for a pressure switch • Stainless steel pump body is easy to prime and has high performance noryl impeller • Built-in pressure booster provides an additional 60 PSI to municipal water pressure • 1" NPT suction and discharge • Max cap.: 900 GPH 99 8196719 – Wt. 21.4 lbs. . . . . . . . .

299

DEEP WELL SUBMERSIBLE PUMPS • 3-wire, 230 volt • Pressed 304 stainless steel pump shell • Top of shell O-ring for positive and effective performance • Polypropylene discharge and suction • Non spinning check valve • Stainless steel hexagon drive pump shaft • Designed for homes, cottages and farms in water wells 4" or larger in diameter 1/2 HP GPH: 410 @ 140 ft., 500 @ 120 ft., 590 @ 100 ft., 670 @ 80 ft., 740 @ 60 ft. 99 8004188 – Wt. 24.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 HP GPH: 660 @ 140 ft., 710 @ 120 ft., 755 @ 100 ft., 795 @ 80 ft., 835 @ 60ft. 99 8085144 – Wt. 28.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

469

106

529

• 115 VAC, 60 Hz, 1/2 HP • Inlet: 1-1/2" NPT Outlet: 1-1/4" NPT • Discharge pressure: 40 PSI • Performance: 150 GPH @ 90 ft. head 630 GPH @ 30 ft. head • Ejector kit not included 8159220 – Wt. 41.4 lbs. . . . . . . . . . . . . . . . .

EJECTOR CONVERTER

• Mounts directly to pump for shallow well applications • Operates in the well for deep well applications 99 • Includes attachment hardware 99 8185555 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . .

179

BRONZE TANK “T” IN-LINE VISUAL WATER STRAINER

• Fits all captive air tanks with bottom discharge • Durable brass for long life 8038526 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . .

2999

INSTALLATION KITS • Cast iron body sand filter with glass chamber • 1-1/4" NPT inlet and outlet 8085185 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . .

WATER PUMPS & ACCESSORIES

1/2 HP CONVERTIBLE JET PUMP

4999

BRONZE CHECK VALVES • Tapered seat valve • Stainless steel spring • Noise free and chatter proof action 1" VALVE 8038580 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . 1-1/4" VALVE 8038571 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . .

• Working pressure: 90 PSI • Butyl membrane • Designed for water systems equipped with a jet pump 9.2 GALLON 8131799 – Wt. 16.0 lbs. . . . . . . . . . . . . . . . . 20.5 GALLON 8131781 – Wt. 28.2 lbs. . . . . . . . . . . . . . .

1699 1999

5999 11999

Includes submersible cable, pressure switch, pressure gauge, bronze tank “T”, and factory spliced heat shrink pump cable. FOR 8004188 150 ft. of submersible cable. 99 8004200 – Wt. 22.8 lbs. . . . . . . . . . . . . . . FOR 8085144 200 ft. of submersible cable. 99 8085193 – Wt. 24.6 lbs. . . . . . . . . . . . . . .

129 159

26.6 GALLON • No water-air or water-tank contact for rust free and no seeping operation • No waterlogging, eliminates the need for air volume control • Bladder is made from synthetic rubber to increase reliability and life span • Max. operating pressure is 75 PSI • Designed for water systems equipped with a jet pump • Draw down @ 20/40 PSI: 8.8 gal. 99 8085201 – Wt. 33.4 lbs. . . . . . . . . . . . . . .

219

107

WATER PUMPS & ACCESSORIES/SUMP PUMPS

PRESSURE SWITCHES

PVC CHECK VALVES

1/4" NPT FEMALE 1.5 HP/115 V or 3.0 HP/230 V.

Size 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 2" NPT

O’all Wt. length (lbs.) ITEM PRICE 3-3/4" 0.3 5770062 4.99 4-1/8" 0.1 5770063 4.99 5" 0.6 5770021 6.99 6" 0.4 5770022 9.99 7-1/8" 1.3 5770064 15.99

PVC FOOT VALVES

O’all Wt. length (lbs.) ITEM PRICE 1" NPT 6-1/8" 0.4 5770019 4.99 1-1/4" NPT 6-1/4" 0.4 5770020 6.99 1-1/2" NPT 8" 0.8 8007248 11.99 2" NPT 9" 1.1 5700009 17.99 3" NPT 12-1/4" 4.2 5770031 49.99 Size

Wt. 0.9 lbs. 8127987 – 20 to 40 PSI 8127995 – 30 to 50 PSI . . . . . . . . . . . . . . . . . .

1499

1/4" FEMALE THREAD with BARB FITTING • 1 HP/115V or 1.5 HP/230V • Preset at 20/40 PSI 5771290 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

2199

ULTRA VIOLET WATER STERILIZER LAMP

• Removes bacteria like E. coli and other contaminants from incoming household water • Flow rate: 720 GPH • Light indicator for quick inspection • Dimensions: 35-1/2"L x 6-3/4"H x 3-1/2"D • 3/4" inlet and outlet • 110 V, 40 W 99 8145377 – Wt. 14.0 lbs. . . . . . . . . . . . . . . .

399

ULTRA VIOLET WATER STERILIZER SYSTEM • Removes bacteria like E. coli and other contaminants from incoming household water • Flow rate: 120 GPH • Can be installed under sinks, easy maintenance • Dimensions: 14"L x 17"H x 5-1/2"D • Includes flexible pipe connections • 110 V, 20 W 8145369 – Wt. 12.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24999

SUBMERSIBLE SUMP PUMPS

• All pumps are equipped with automatic thermal and overload protection • All Burke 1-1/2" NPT discharge pumps include a 1-1/4" reducer GPH @ Head

HP Switch

1,450 @ 18 ft., 2,000 @ 15 ft. 1/3 Tethered 2,500 @ 10 ft., 3,000 @ 5 ft. float 550 @ 18 ft., 1,500 @ 15 ft., 1/4 Vert. B 2,100 @ 10 ft., 2,500 @ 5 ft. float 1,000 @ 22 ft., 1,600 @ 18 ft., Vert. C 2,300 @ 15 ft. 2,850 @ 10 ft., 3,200 @ 5 ft. 1/2 float 475 @ 25 ft., 1,500 @ 20 ft., 2,300 @ 15 ft. 1/2 Vert. D 2,700 @ 10 ft., 3,000 @ 5 ft. float A

108

Noryl impeller Noryl impeller Noryl impeller Cast iron body

NPT Wt. Outlet (lbs.) ITEM PRICE 1-1/2" 10.5 8038036 109.99 1-1/2" 10.5 8038090 139.99 1-1/2" 10.5 8038152 139.99 1-1/2" 21.2 8038189 159.99

SUMP PUMP VALVE CHECK

1/4" SUMP PUMP DISCHARGE HOSE KIT • 1-1/4" x 20 ft. sump pump drain hose kit • Includes adapter and clamp 8038535 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

Features

799

For vertical pumps. 8036600 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

349

SUMP PUMPS

HEAVY DUTY SUBMERSIBLE SUMP PUMPS

GPH @ Head

Switch

NPT Wt. Features Outlet (lbs.

ITEM

PRICE

A *

360 @ 15 ft., 1,900 @ 10 ft. Tethered Cast iron 1/2 1-1/2" 15.9 8145278 139.99 body 3,300 @ 5 ft. float 1,800 @ 18 ft., 3,000 @ 15 ft., Cast iron 1-1/2" 23.3 8103525 199.99 1/3 Vert. B body 3,400 @ 10 ft., 4,020 @ 5 ft. float 2,460 @ 18 ft., 3,300 @ 15 ft., Vert. Cast iron 1-1/2" 23.4 8103533 219.99 1/2 B body 3,840 @ 10 ft., 4,380 @ 5 ft. float * effluent style pump - capable of handling 3/4" solids

UTILITY PUMPS

C GPH @ Head

D HP

Features

NPT Wt. Outlet (lbs.) ITEM PRICE

600 @ 15 ft., 900 @ 10 ft. Plastic body 1/2", 1/4 1,200 @ 5 ft. 3 adapters 3/4", 1" 8.2 5770096 84.99 800 @ 15 ft., 1,000 @ 10 ft., Bottom suction to 1/8" 1/2", 1/4 Continuous D 1,200 @ 5 ft. duty motor 3/4", 1" 7.3 8037652 99.99 200 @ 25ft., 525 @ 20 ft., 1,000 @ Automatic shut-off when 1" 8.8 8003918 169.99 E 15 ft., 1,270 @ 10 ft., 1,525 @ 5 ft. 1/4 water level is depleted For restricted sump pits 320 @ 22ft., 590 @ 15 ft., Continuous duty motor 1/3 1-1/2" 11.2 8179905 159.99 F 2,110 @ 10 ft., 2,400 @ 5 ft Automatic diaphram no float switch required C

EMERGENCY BACK-UP SUMP PUMP BUDDY

1/3 HP COLUMN SUMP PUMP

• 115V, 60 Hz motor with thermal protection • Top mount switch automatically actuated by thermoplastic float • PVC plastic column for corrosion free operation • 1-1/4" NPT discharge • 6 ft. power cord • Impeller, open trash design, handles liquid • GPH @ head: 1,000 @ 20 ft., 1,550 @ 15 ft., 2,400 @ 10 ft. 2,850 @ 5 ft. 8003416 – Wt. 15.6 lbs. . . . . . . . . . . . . . . . . . .

• No electricity or battery required • Works from municipal water pressure, creates a vacuum that draws water out to discharge line • Easily connects to municipal water supply and conventional sump pump discharge line • Automatic control valve starts the system in the event of flooding • GPH @ head: 150 @ 15 ft., 325 @ 10 ft., 600 @ 5 ft. • Electrical pump, piping not included 99 99 8103483 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . .

139

109

SUMP PUMPS

DIAPHRAGM HAND PUMPS

• Small stones and slurry pass through pump without hampering use • Capable of 12 ft. suction lift and 12 ft. delivery head • Can be used to prime jet pumps O’all dim. Hose Wt. Cap. (L x W x H) size (lbs.) ITEM PRICE 660 GPH 13-3/8" x 5-5/8" x 4" 1" 2.2 8138950 49.99 900 GPH 13-3/8" x 5-5/8" x 4" 1-1/2" 2.2 8138968 59.99

SELF-LUBRICATING GEAR PUMPS • Stainless steel gears and shaft • Casted bronze bodies and covers • Replaceable oil impregnated bronze bearings • 5/8" stainless steel shafts • Pumps may be operated in either direction • 100 PSI max. pressure, 1,800 RPM max Max. GPH @ Wt. Required HP 1,800 RPM (lbs.) ITEM PRICE @ 0 PSI @ 100 PSI @ 0 PSI @ 100 PSI 1/2" NPT 618 300 1/3 1 6.3 8038312 129.99 3/4" NPT 858 600 1/3 1-1/2 6.0 8038330 139.99 1" NPT 1,020 630 1/2 2 6.6 8038349 149.99 Port Size

1/2 HP SEWAGE PUMP

• 115V, 60 Hz motor with built-in overload protection • Cast iron impeller • Cast iron pump body • 2" suction and discharge • Tethered float switch Performance: 3,000 GPH @ 5 ft. 2,760 GPH @ 10 ft. 2,520 GPH @ 15 ft. 8184939 – Wt. 34.2 lbs. . . . . . . . . . . . . . . .

• 115V, 60 Hz motor with built-in overlaod protection • Vortex noryl impeller • Cast iron pump body • 2" suction and discharge • Column style switch Performace: 4,500 GPH @ 5ft. 3,120 GPH @ 10ft. 720 GPH @ 15 ft. 8038205 – Wt. 28.8 lbs. . . . . . . . . . . . . . . . .

19999

1/2 HP HEAVY DUTY SEWAGE PUMP • 115V, 60 Hz motor with built-in overload protection • Vortex noryl impeller • Cast iron pump body • 2" suction and discharge • Tethered float switch Performance: 6,700 GPH @ 5 ft. 5,800 GPH @ 10 ft. 5,000 GPH @ 15 ft. 1,500 GPH @ 20 ft. 400 GPH @ 22 ft. 8145344 – Wt. 56.2 lbs. . . . . . . . . . . . . . . . .

CONTRACTOR GRADE 1/2 HP SEWAGE PUMP

• 115V, 60 Hz motor with built-in overload protection • Can pump max. 2" solid waste • Cast iron pump • Stainless steel motor housing 99 • 2" discharge • Tethered float switch • Approx. 3,600 GPH @ 5 ft. head 5770068 – Wt. 34.7 lbs. . . . . . . . . . . . . . . . .

299

MECHANICAL FLOAT SWITCHES

110

23999

Both switches rated 115 VAC, 15 amps. • Use with submersible sump pumps • Designed to remove water from basin 5770124 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . • Universal piggy back type • Designed to maintain water level 8038385 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

29999

2" SEWAGE CHECK VALVE • Black ABS housing • Includes: 1 check valve with 2" dia. ports, two 2-3/8" rubberized vinyl sleeves to fit 2" I.D. tubing, 4 stainless steel screws and 4 stainless steel hose clamps 99 8005045 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

3499 34

1499

“PONY” PUMPS A • The handy little pumps for homeowners, RV owners, boaters, ranchers, campers, A) 110 VOLT and contractors 99 5771233 . . . . . . . . . . . • Chrome-plated brass body B • Flexible nitrite impeller, compounded for long life B) 12 VOLT 99 • Use with fresh or sea water from 4°C to 60°C (40°F to 140°F) 5771431 . . . . . . . . . . . . • Extra impeller and gasket included • Dual ports have 3/4" external garden hose thread and 3/8" NPT internal thread Gallons per hour Shut off Wt. Model O’all dim. Load (lbs.) 1 ft. 5 ft. 10 ft. 20 ft. 40 ft. (ft.) 48.3 6-1/8" x 3-3/8" x 3-3/8" 1.75 amps/360 GPH 5.0 A 110 VAC 360 342 300 270 90 46.0 6-3/4" x 3" x 3-1/8" 7 amps/300 GPH 4.1 B 12 VDC 300 258 240 202 90 CONVERSION KIT Converts pump for use with very hot water, fertilizers, other liquids, light oils, and antifreeze. Includes: 2 “Viton” seals REPAIR KIT and 2 “Hydrin” impellers that will not swell. Includes impeller and gasket. 99 99 5771241 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5771456 – Wt. 0.1 lbs. . . . . . . .

SPECIALTY PUMPS

SUBMERSIBLE WATER PUMPS C) 12 VDC SUBMERSIBLE PUMP • Compact centrifugal pump • Inlet must be at or below level of liquid pumped • Pumps up to 339 GPH, draws only 1.0 to 1.5 amps @ 12 VDC • Outlet has 3/8" male pipe fitting and accepts 5/8" I.D. hose • O’all dim.: 2" x 2" x 5", incl. outlet and feet • 1/4" mounting slots 99 5771449 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) SUBMERSIBLE WATER PUMPS • Strainer attaches for submersible use • Complete with 5 ft. 3-prong plug Gal./hr. Shut off Inlet Outlet (ft.) 1 ft. 3 ft. 5 ft. 180 140 100 8 1/2" 5/16" 500 360 300 11 3/4" 3/8"

Wt. (lbs.) ITEM PRICE 4.8 5770185 79.99 4.7 5771738 89.99 E

E) HEAVY DUTY SUBMERSIBLE WATER PUMP • The “Tornado” is designed for underwater use, but can be adapted to garden hose attachments • Pumps over 1,000 GPH • Inlet: 3/4" pipe I.D.; outlet: hose connection • Capacity: 1,100 GPH @ 2 ft. head, 950 GPH @ 10 ft. head, 250 GPH @ 25 ft. head • 115V, 4.5A 390W 99 5771480 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

169

SELF-PRIMING PUMP

• 5/16" shaft • Metal housing • Pumps up to 660 GPH • Max. head 100 ft. • Self-priming to 15-1/2" • 3/4" garden hose inlet and outlet • O’all dim.: 4-1/4" x 3" x 4" 5770250 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

DRILL PUMP

• Attaches to 1/4" or 3/8" electric drill • Empties aquariums, water beds, household appliances, crankcase motor oil, etc. • 5°C to 80°C (41°F to 176°F) temp. range 99 • Pumps 240 GPH 5770771 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

111

WATER VALVES

12V MARINE UTILITY PUMP

BILGE PUMP

• Fully submersible • Inlet at bottom • Cap. approx. 60 GPH • Use 3/8" I.D. discharge hose • Operates on 4.5 to 12 VDC, batteries or transformer • Can be used in aquariums, fountains, boats, etc. • O’all dim.: 1-1/4" x 2" x 3-1/2" 99 4270013 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

• Self priming • Dual threaded inlet: 3/8" NPT female and 3/4" male • Includes mounting bracket • Not for use with fuel or flammable liquids 8171118 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . .

6999

12 VDC BILGE PUMPS • 5.5 amp • Capacity: 1000 GPH • Outlet: 1" • Max. lift: 10 ft. • GPH @ 5 ft.: 500 GPH 1,000 GPH 8197055 – Wt. 1.6 lbs. . . . .

• 11A • Capacity: 2000 GPH • Outlet: 1" • Max. lift: 11.5 ft • GPH @ 5 ft.: 1000 GPH • GPH @ 10 ft.: 500 GPH 99 2,000 GPH 8197063 – Wt. 2.9 lbs. .....

4999

WATER VALVES BALL VALVES

BALL VALVES • PVC construction • Max. pressure: 150 PSI • For water and oil use • Not to be used with gas or steam Port size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

Wt. (lbs.) 0.2 0.2 0.5 0.8 1.0 1.3

ITEM 5770032 5770033 5770034 5770035 5770036 5770038

PRICE 3.49 4.49 5.49 7.49 9.49 11.99

LOW PRESSURE LIQUID FILLED GAUGES

GATE VALVES

• Stainless steel construction • 2-1/2" dia. aluminum dial • Scale shows PSI and kPa (kilopascal) Pressure 0 - 30 PSI 0 - 60 PSI 0 - 100 PSI 0 - 200 PSI 0 - 300 PSI 0 - 600 PSI

Range Wt. kPa (lbs.) ITEM PRICE 0 - 210 0.5 8214306 14.99 0 - 400 0.5 8214322 14.99 0 - 700 0.5 8214330 14.99 0 - 1,400 0.5 8214348 14.99 0 - 2,100 0.5 8214355 14.99 0 - 4,000 0.5 8214363 14.99

90° CAM-LOCK COUPLING B

112

• Forged brass • Female pipe thread on both ends Working Pressure Wt. Size (lbs.) ITEM PRICE (1) (2) 1/4" 600 PSI 150 PSI 0.3 8137028 3.99 3/8" 600 PSI 150 PSI 0.3 8137036 4.99 1/2" 600 PSI 150 PSI 0.5 8137044 4.99 3/4" 600 PSI 150 PSI 0.7 8137051 5.99 1" 500 PSI 150 PSI 1.1 8137069 11.99 1-1/4" 500 PSI 150 PSI 1.5 8137077 16.99 1-1/2" 500 PSI 150 PSI 2.4 8137085 21.99 2" 500 PSI 150 PSI 3.4 8137093 28.99 (1) Water, oil, and gas (2) Steam

• Casted brass • Working pressure: 100 PSI • For water and oil use • Female pipe thread on both ends • Not for use with gas or steam Size 1/2" 3/4" 1" 2"

Wt. (lbs.) 0.5 0.7 1.0 2.8

ITEM 5713060 5713078 5713086 5710180

PRICE 6.49 7.49 8.49 18.99

2" NPT male thread. A) COUPLING 5700372 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . B) ADAPTER 5700364 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1899 899

Working pressure: 100 PSI @ -32°C (0°F), 125 PSI @ 21°C (70°F), 70 PSI @ 66°C (150°F)

• Quickly connect/disconnect hoses • Stainless steel pins and rings • Resistant to many chemicals

• Rustproof • Made of polypropylene • Nylon levers

COUPLERS

MALE NPT THREAD HOSE BARB FEMALE NPT THREAD Size Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE 3/4" 0.1 0.2 0.1 8154163 6.99 8154213 6.99 8154288 6.99 1" 0.2 0.2 0.2 8154171 7.49 8154221 7.49 8154296 7.49 1-1/2" 0.4 0.5 0.5 8154189 8.99 8154239 8.99 8154304 8.99 2" 0.5 0.6 0.6 8154197 10.99 8154247 10.99 8154312 10.99 3" 0.9 1.1 1.0 8154205 14.99 8154270 14.99 8154320 14.99

ADAPTERS

MALE NPT THREAD HOSE BARB FEMALE NPT THREAD Size Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE Wt. (lbs.) ITEM PRICE 3/4" 0.1 0.1 0.1 8154338 2.49 8154395 2.49 8154452 2.49 1" 0.1 0.1 0.1 8154346 2.99 8154403 2.99 8154460 2.99 1-1/2" 0.2 0.2 0.1 8154361 3.99 8154411 3.99 8154486 3.99 2" 0.2 0.3 0.2 8154379 4.49 8154429 4.49 8154494 4.49 3" 0.4 0.6 0.4 8154387 8.99 8154445 7.99 8154502 6.99

ALUMINUM CAM-LOCK COUPLERS B

A B C D E F G

Type Wt. (lbs.) Female NPT thread coupler 0.9 Male NPT thread coupler 0.8 Hose barb coupler 1.0 Female NPT adapter 0.3 Male NPT adapter 0.5 Hose barb adapter 0.6 Female 90° coupler 1.3

E 2" COUPLERS ITEM PRICE 5700013 10.99 5700017 10.99 5700014 10.99 5700016 4.99 5700019 6.49 5700015 5.49 8164220 18.99

Tom Achenbach joined Princess Auto on July 5th, 1976 to help build our Manufacturing Division, which was in re-organization. He was instrumental in the building of a modern cylinder manufacturing facility next to PAL. As Sr. Vice President of Manufacturing, he can be credited with taking this Division from a struggling, inefficient, small scale operation to the successful, efficient, professional business it is today. Tom currently works 3 days per week as he prepares to enter retirement.

WATER VALVES/CAM LOCK COUPLINGS

CAM-LOCK QUICK-CONNECT COUPLINGS

3" COUPLERS ITEM PRICE 8129447 16.99 8129454 15.99 8129462 15.99 8129470 7.99 8129496 11.99 8129512 9.99 – –

113

PVC FITTINGS

PVC FITTINGS CONNECTORS & ELBOWS Wt. 0.1 lbs.

Size (male x hose barb) 3/8" NPT x 1/2" 1/2" NPT x 3/8" 1/2" NPT x 1/2" 3/4" NPT x 1/2" 3/4" NPT x 3/4"

ITEM 5710275 5710276 5710277 5710278 5710279

ELBOWS

PRICE 1.79 1.79 1.79 1.79 2.09

ITEM – – 5710273 5710274 –

PRICE – – 1.09 1.19 –

HEX PLUGS Wt. 0.1 lbs.

Wt. 0.1 lbs.

Size (NPT) (female x male) 1/2" x 1/2" 3/4" x 3/4"

ITEM

PRICE

5710281 5710282

3.49 3.49

TEES

Size 1/4" male NPT 3/8" male NPT 1/2" male NPT 1" male NPT

ITEM 5710247 5710248 5710307 5710252

PRICE 1.19 1.09 1.09 1.19

HOSE MENDERS & ELBOWS Wt. 0.1 lbs.

Wt. 0.1 lbs.

Size (hose barbs) 1/4" x 1/4" x 1/4" 3/8" x 3/8" x 3/8" 1/2" x 1/2" x 1/2" 5/8" x 5/8" x 5/8" 3/4" x 3/4" x 3/4" * centre barb

ITEM PRICE 5710266 1.99 5710267 1.99 5710268 2.49 5710269 2.49 5710270 2.99

Size (hose barb) 1/4" x 1/4" 3/8" x 3/8" 1/2" x 3/8" 1/2" x 1/2" 5/8" x 5/8" 3/4" x 3/4"

CONNECTORS & COUPLINGS

ITEM PRICE ITEM PRICE 5710253 1.19 5710259 0.99 5710254 1.69 5710260 0.99 5710285 1.89 – – 5710255 1.59 5710261 1.09 5710257 1.19 5710262 1.19 5710258 1.79 5710263 1.19

REDUCER BUSHINGS Wt. 0.5 lbs.

MALE THREADS FEMALE THREADS Size (NPT) ITEM PRICE ITEM PRICE 3/8" x 1/4" 5710293 1.09 – – 3/8" x 3/8" 5710289 1.09 – – 1/2" x 3/8" 5710294 1.09 – – 1/2" x 1/2" 5710290 1.09 5710241 2.99 3/4" x 1/2" 5710295 1.19 – – 3/4" x 3/4" 5710291 1.19 5710242 3.49 1" x 1" – – 5710292 1.79 1-1/2" x 1-1/2" – – 5710245 7.99

Wt. 0.1 lbs.

Size (NPT) (male x female) 3/8" x 1/8" 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 3/8" 3/4" x 1/2" 1" x 3/4" 1-1/4" x 1" 1-1/2" x 1" 1-1/2" x 1-1/4" 2" x 1-1/2"

ITEM

PRICE

5710227 5710228 5710229 5710230 5710232 5710233 5710234 5710235 5710236 5710237 5710238

1.99 1.99 1.99 1.89 1.99 1.09 1.79 2.99 3.29 3.29 2.99

PLASTIC INSERT FITTINGS

ELBOW Size

114

1-1/4" 1-1/2" 2"

Wt. (lbs.) 0.1 0.1 0.2

FITTING ITEM

PRICE

5700067 5700075 5700083

0.99 1.29 1.89

Wt. (lbs.) 0.1 0.1 0.2

ITEM 5700000 5700018 5700026

MALE ADAPTER NPT MALE THREAD Wt. PRICE (lbs.) ITEM PRICE 0.1 0.69 5700034 0.69 0.1 0.89 5700042 0.79 0.1 1.39 5700059 1.39

90° ELBOW Size NPT 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

45° ELBOW

ITEM

PRICE

ITEM

PRICE

ITEM

PRICE

ITEM

PRICE

1.79 1.79 0.99 – 2.19 – 3.99 5.29

5712989 5713482 5713490 5713508 – – – –

1.99 1.99 1.49 1.99 – – – –

5710172 5713532 5713540 5713557 5713565 5713573 – –

2.29 2.29 1.49 2.29 2.99 4.49 – –

– 5713581 5713599 5713607 – – – –

– 2.49 2.49 3.29 – – – –

CROSS

COUPLING

PLUG

ITEM

PRICE

ITEM

PRICE

ITEM

PRICE

ITEM

PRICE

5710173 5713631 5713649 5713656 5713664 5713672 – –

2.09 2.29 1.49 1.89 3.49 4.99 – –

5710174 5713680 5713698 5713706 – – – –

5.49 5.79 4.99 5.79 – – – –

5712997 5713730 5713748 5713755 5713763 5713771 5714100 5714118

1.69 1.69 1.49 1.79 2.49 3.19 3.89 5.79

5713003 5713789 5713797 5713805 5713813 5713821 – –

0.99 0.79 0.79 1.49 1.69 1.59 – –

CLOSE Size NPT 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

90° STREET ELBOW

5710171 5713433 5713441 – 5713466 – 5714068 5714076

STRAIGHT TEE Size NPT 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

45° ELBOW

SHORT

3" LONG

BLACK PIPE FITTINGS

STANDARD BLACK MALLEABLE PIPE FITTINGS

HEX CAP

ITEM

PRICE

ITEM

PRICE

ITEM

PRICE

ITEM

PRICE

5710175 5713839 5714407 5714449 5714670 5714688 5714167 5714175

1.29 1.29 0.99 1.19 1.39 1.59 1.99 2.49

– 5710324 5714415 5714464 5714696 5714712 5714183 5714191

– 1.49 0.99 1.19 1.49 1.79 1.99 2.69

5713011 5714399 5714431 5714480 5714704 5714720 5714209 5714217

1.49 1.59 1.29 1.19 1.69 1.99 2.39 2.79

5713045 – – – – – – –

0.79 – – – – – – –

NIPPLES

Size (NPT) 1/4" x 1/8" 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 3/8" 3/4" x 1/2" 1" x 3/4" 1-1/4" x 1/2" 1-1/4" x 1" 1-1/2" x 1" 2" x 1-1/4" 2" x 1-1/2"

1/4" NPT. 1-1/2" LONG NIPPLE 29 HEX BUSHING COUPLER 90° REDUCING 5710327 – Wt. 0.1 lbs. . . . . . . 6" LONG NIPPLE REDUCER REDUCER ELBOW 29 ITEM PRICE ITEM PRICE ITEM PRICE 5713029 – Wt. 0.2 lbs. . . . . . . 5710176 1.69 – – – – GALVANIZED 5710177 1.69 5713896 1.69 5713847 2.49 5714506 1.19 – – – – INSERT PIPE 5713953 1.29 5713904 1.59 5713854 1.89 FITTINGS 5714498 1.39 – – – – 5713961 1.39 5713912 1.69 5713862 2.19 Size ITEM PRICE 5713979 1.89 5713920 2.59 – – 1/2" 5712195 1.69 – – 5714134 3.29 – – 3/4" 5712203 1.99 5713987 2.49 5713938 3.49 – – 1" 5712211 2.49 5714126 3.49 – – – – 1-1/4" 5712229 3.29 5714142 3.89 – – – – 2" 5712245 4.99 5714159 3.89 – – – –

1 2

115

WATER HOSE & ACCESSORIES

HOSE

BRAIDED HOSE

SUCTION HOSE BY THE FOOT • Will not collapse or flatten under suction • Temperature range: -23° to 40°C (-10° to 104°F) • Hose is abrasion and ozone resistant, non-rotting, and mildew proof Working Wt. Size ITEM PRICE Pressure (lbs.) 1-1/2" 90 PSI 1.0 5700331 1.89/ft. 2" 70 PSI 0.6 5700349 1.89/ft. 3" 60 PSI 1.1 5700356 3.09/ft.

CLEAR VINYL TUBING by the FOOT

Use for water supply and drainage on machines and equipment. Inside Dia. 1/4" 3/8" 1/2" 3/4" 1" 1-1/4"

Pressure Working Bursting ITEM PRICE 140 PSI 700 PSI 8040292 0.29/ft. 140 PSI 700 PSI 8040309 0.49/ft. 112 PSI 490 PSI 8040318 0.69/ft. 84 PSI 420 PSI 8040327 1.49/ft. 70 PSI 280 PSI 8040336 1.59/ft. 42 PSI 170 PSI 8040345 1.99/ft.

CLEAR VINYL TUBING • 10 ft. long • Lightweight and flexible • Oil, heat, and acid resistant

Wt. 0.5 lbs.

Inside Working Bursting ITEM PRICE Dia. Pressure Pressure 1/8" 50 PSI 200 PSI 8040247 0.19/ft. 1/4" 50 PSI 200 PSI 8040096 0.19/ft. 5/16" 50 PSI 200 PSI 8040265 0.29/ft. 3/8" 50 PSI 200 PSI 8040201 0.29/ft. 1/2" 40 PSI 150 PSI 8040210 0.39/ft. 3/4" 25 PSI 100 PSI 8040229 0.59/ft. 1" 25 PSI 100 PSI 8040238 0.69/ft.

Inside Dia. 1/8" 1/4" 5/16" 3/8" 1/2"

Outside Dia. 3/16" 3/8" 7/16" 9/16" 5/8"

Wt. (lbs.) 0.2 0.4 0.4 0.5 0.6

ITEM

PRICE

5710219 5710220 5710221 5710222 5710224

3.99 4.49 5.49 5.99 6.99

PVC DISCHARGE HOSE BY THE FOOT

1/2" x 50 FT PVC HOSE

• Blue PVC water hose • Heavy duty machined brass hose fittings • 30% lighter than rubber hose • Chemical resistant 5710328 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . .

2499

STAINLESS STEEL HOSE CLAMPS

Wt. 0.1 lbs.

116

PRICE 0.59/ft. 0.89/ft. 1.29/ft.

HOSE CLAMP KIT

Maximum corrosion resistance. Size Size Range 3/8" 3/8" to 7/8" 1/2" 1/2" to 1" 5/8" 9/16" to 1-1/16" 1" 11/16" to 1-1/2" 1-1/2" 1-1/16" to 2" 2" 1-9/16" to 2-1/2" 2-1/4" 1-13/16" to 2-3/4" 3" 2-3/4" to 4" 3-1/2" 3-1/4" to 4-1/4" 4-1/2" 3-3/4" to 5" 5-1/2" 4-1/4" to 6" 6-1/2" 5" to 7"

• 64 PSI • Rolls up flat for easy storage Size Wt. (lbs.) ITEM 1-1/2" I.D. 0.1 8072928 2" I.D. 0.2 8072944 3" I.D. 0.3 8072951

ITEM 8125791 8125817 8125825 8125841 8125858 8125866 8125882 8125916 8125924 8125940 8126005 8126013

PRICE 0.55/ea. 0.65/ea. 0.69/ea. 0.89/ea. 0.99/ea. 1.09/ea. 1.19/ea. 1.29/ea. 1.49/ea. 1.59/ea. 1.69/ea. 1.89/ea.

• Carbon steel • Contains: eight 16 mm, six 22 mm, four 25 mm, two 28 mm, two 35 mm, and four 40 mm clamps 8160624 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

HOSE-O-CLAMPS 5 PK Wt. 0.1 lbs.

Hose 1/2" O.D. 9/16" O.D. 5/8" O.D.

ITEM 5714308 5714316 5714324

PRICE 1.89/pkg. 1.99/pkg. 2.09/pkg.

GARDEN HOSE COUPLERS

• Fits 5/16" hex head • Flexible shank to reach difficult spots • O’all length: 10-1/2" 2970198 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

A) GARDEN HOSE CONNECTOR 1/2" NPT male x male garden hose. 5710131 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . B) SWIVEL CONNECTOR 99 1/2" NPT male x female garden hose. 5790290 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

299 349

GARDEN HOSE QUICK COUPLERS GARDEN HOSE COUPLERS

B Wt. 0.1 lbs.

Heavy duty coupler and nipple is made of brass and stainless steel. A) FEMALE COUPLER 99 5710050 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . B) MALE NIPPLE 99 5710049 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

Size 3/8" 1/2" 5/8" 3/4"

FIRE HOSE NOZZLE

2" POND STRAINER

6 3

• Brass housing • 1-1/2" fire hose style nozzle 8004264 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . .

2999

FEMALE ITEM PRICE 8021188 3.99 8021197 3.99 8021213 3.99 8021231 3.99

MALE ITEM PRICE 8021259 3.99 8021268 3.99 8021277 3.99 8021286 3.99

5700497 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

WATER HOSE & ACCESSORIES

HOSE CLAMP SCREWDRIVER

3999

SARA FLORES - QUINTANA Date of birth: May 18, 1987 Hair: Brown Eyes: Brown Missing since: Feb 18, 1995

WANTED ON A CANADA WIDE WARRANT FOR ABDUCTION

CARMEN BERMUDEZ-QUINTANA Date Of Birth: Feb 27, 1960 Height: 5'10" Weight: 150 lbs Hair: Red/yellow Eyes: Brown Missing since: Feb 18, 1995 A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

All Calls Confidential—No Name Required HAVE YOU SEEN THIS CHILD?

1-800-387-7962

117

PRESSURE WASHERS

OUR PRESSURE WASHERS ARE DESIGNED FOR COLD WATER USE CONSUMER CLASS

CONSUMER CLASS

We recommend these models for up to 3 hours of use per week. For applications such as washing your car, sidewalk, lawn mower, and home.

AXIAL STYLE PUMPS ARE TYPICALLY RATED FOR 500-800 HOURS LIFE EXPECTANCY.

A) 2.5 GPM @ 2,500 PSI • 6.5 HP Lifan engine • Comet BXD series axial pump with built-in unloader, easy start, thermal relief, and soap injector • Uses stainless steel plungers with forged brass manifold • Includes 25 ft. x 3/8" hose, 36" insulated wand, 0°, 15°, 40°, and quick change soap nozzle 99 8200479 – Wt. 80.5 lbs. . . . . . . . . . . . . . . . . . .

399

B B) 1.8 GPM @ 1,200 PSI • 1.5 HP, 120V, 13A motor • Comet 3 piston axial style pump with ceramic coated stainless steel plungers, builtin unloader valve, and fixed rate chemical injector • Thermal relief valve to help prevent pump from overheating • Includes 30 ft. x 3/8" hose, 18" insulated wand, 25° quick change cleaning nozzle, and quick change soap nozzle 99 5790114 – Wt. 81.7 lbs. . . . . . . . . . . . . . .

599

PRESSURE WASHER PUMP OIL

4 9

118

Non-detergent, 30 weight formula with anti-oxidizing and rust inhibiting additives. C) MINERAL BASE PUMP OIL – 16 OZ. (473 ml.) 99 8182123 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) SYNTHETIC BLEND OIL – 1 LITRE 99 8026156 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) SYNTHETIC AXIAL PUMP OIL – 4.5 OZ. (128 ml.) • This is a specially formulated synthetic oil with additives to handle the high demands of axial pumps • Can be used in all types of pumps but is neccesary in axial pumps 99 8162901 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) PUMP ANTI-FREEZE & LUBRICANT – 6 OZ.(170 ml.) • Contains lubricating and antifreeze properties • Spray directly into inlet to ensure pump protection from freezing or drying out of internal components during storage • Comes with garden hose fitting for ease of use 99 8147225 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

COMMERCIAL/AGRICULTURAL CLASS

We recommend these models for up to 20 hours of use per week. For applications such as vehicle washing, store front cleaning, and plant maintenance.

THESE TRIPLEX PLUNGER PUMPS ARE RATED FOR MORE THAN DOUBLE THE LIFE EXPECTANCY OF COMPARABLE AXIAL STYLE PUMPS A) 2.9 GPM @ 2,500 PSI • Comet triplex plunger pump features: - Industrial grade ball bearings - 1 piece extra wide connecting rods - Abrasion proof solid ceramic pistons - Oversized die-cast aluminum crankcase to help dissipate heat build up - Thermal relief valve to help prevent pump from overheating - Built-in unloader valve with fixed rate chemical injector • Includes 30 ft. x 3/8" hose, 28" insulated wand, 25° quick change cleaning nozzle, and quick change soap nozzle • 5 HP, 230V, 21 amp electric motor 99 8093296 – Wt. 111.6 lbs. . . . . . . . . . . . . . . .

PRESSURE WASHERS

COMMERCIAL/AGRICULTURAL CLASS

999

B) 2.7 GPM @ 2,200 PSI • 5.5 HP Honda GX overhead valve engine • A.R. Triplex plunger pump features: - Industrial grade ball bearings - 1 piece industrial grade oversized bronze connecting rods - Heat resistant solid ceramic pistons - Reinforced, oversized die-cast aluminum crankcase to help dissipate heat - Thermal relief valve to help prevent pump from overheating - Bolt-on unloader valve with fixed rate chemical injector • Includes 30 ft. x 3/8" hose, 28" insulated wand, 25° quick change cleaning nozzle, and quick change soap injector nozzle 99 8186322 – Wt. 95.6 lbs. . . . . . . . . . . . . . . . .

849

CONTRACTOR/INDUSTRIAL CLASS WITH PROPER MAINTENANCE ALL TRIPLEX PLUNGER PUMPS ARE RATED FOR OVER 2,500 HOURS

CONTRACTOR/INDUSTRIAL CLASS

We recommend these models for 20 hours or more of use per week. For applications such as contract cleaning, paint preparation, washing trucks and heavy equipment.

C C) 4 GPM @ 3,600 PSI • 13 HP Honda GX overhead valve engine with low oil protection • A.R. triplex plunger pump features: - Industrial grade oversized tapered roller bearings - 1 piece oversized connecting rods - Stainless steel plunger rods with polished solid ceramic pistons - Oversize anodized die-cast aluminum crankcase with larger cooling fins for optimum heat dispersal - Thermal relief valve to help prevent the pump from overheating - Bolt-on unloader valve with variable rate chemical injector • Includes 50 ft. x 3/8" hose, 36" insulated wand, 40°, 25°, 15° and 0° quick change cleaning nozzles, and quick change soap nozzle • Large 13/5.00 x 6 tires for easy handling 8093270 – Wt. 167.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

144999

119

PRESSURE WASHER PUMPS

AXIAL STYLE PUMPS Axial style pumps are best suited for our Consumer Class or light duty Commercial/Agricultural Class pressure washers. This style of pump’s economical design uses an angled plate driven directly by the motor shaft to compress the 3 spring loaded pistons in series and create the flow of water.

A) 2.5 GPM @ 2,500 PSI PUMP ASSEMBLY • Fits gas engines from 1.1 HP to 6.5 HP with 3/4" shaft • Requires 6.5 HP gas engine at maximum output • Includes a built-in pressure control valve and chemical injection system • Integrated fixed rate chemical injector • RMV series axial pump assembly 99 8149635 – Wt. 8.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

169

B) 2.5 GPM @ 2,700 PSI PUMP ASSEMBLY • Fits gas engines from 3.5 HP to 6.5 HP with 3/4" shaft • Includes a built-in pressure control valve and chemical injection system • Integral fixed rate chemical injector • SJV series axial pump assembly 99 8149676 – Wt. 11.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

249

TRIPLEX PISTON PUMPS AR plunger pumps feature die-cast aluminum bodies, oversized bearings, extra thick ceramic plungers, stainless steel plunger rods, and forged brass manifolds for maximum performance and life. Connecting rods are oversized for strength and load disbursement. High pressure “V” style Buna-N seals are strong and tighten under load, while low pressure “U” cup double lips Buna-N. The oil seals act as triple lip with load. Support guides are machined brass construction that assures proper plunger alignment and maximizes seal packing and lifespan.

C) 3.0 GPM @ 2,500 PSI PUMP ASSEMBLY • Fits 3.5 to 6.5 HP gas engine with 3/4" shaft • Requires a 6.5 HP gas engine at maximum output • Use with unloader valve 8149684 • XMV series piston pump assembly 99 8149643 – Wt. 16.9 lbs. . . . . . . . . . . . . . . . . . . D) 3.5 GPM @ 2,000 PSI PUMP ASSEMBLY • Fits NEMA “C” face electric motor with 5/8" shaft • Requires 5 HP electric motor • Use with unloader 8149684 • XMV series piston pump assembly 99 8149650 – Wt. 17.2 lbs. . . . . . . . . . . . . . . . . . . E) 4 GPM @ 3,000 PSI PUMP ASSEMBLY • Fits 8 to 20 HP gas engine with 1" shaft • Requires a 11 HP gas engine at maximum output • Use with unloader valve 8149692 • RKV series piston pump assembly 99 8149668 – Wt. 21.9 lbs. . . . . . . . . . . . . . . . . .

299

399

UNLOADER/INJECTOR VALVES G H F

• Bolt-on OEM replacement for most washer pumps • Adjustable; not factory preset • Inlet: 1/2" NPT female, outlet: 3/8" NPT male • Requires garden hose inlet adapter sold separately (5790290 or 8194557) F) MAX. 2,600 PSI 8149684 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . G) MAX. 3,650 PSI 8149692 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . H) IN-LINE UNLOADER VALVE • Must be mounted vertically • 3/8" FNPT inlet/outlet, 1/4" FNPT bypass port • 8 GPM max. flow • 90°C (195°F) max. temperature • 2,900 PSI max. pressure • For single or multiple gun systems 8195638 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . DOWNSTREAM SOAP INJECTORS OEM replacement for above unloader valves. I) REPLACEMENT for 8149684 8151078 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . J) REPLACEMENT for 8149692 8152647 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . K) SOAP INJECTOR PICKUP HOSE and FILTER • For use with chemical injectors on pressure washers • 3 ft. of clear vinyl tubing with mesh filter 8121550 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

6999 8499

5999

2299 2299

120

299

A D

C) BRASS SWIVEL FITTING • 3/8 MNPT x 3/8 FNPT • 4,000 PSI max. 8032470 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . B D) 360° HOSE REEL SWIVEL FITTING • 5,000 PSI max. • Replacement for 8055908 • All steel 8032461 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . construction with brass swivel E) 360° HOSE REEL SWIVEL FITTING • 3/8" NPT hose connections • Holds up to 100 ft. of 3/8" or 60 ft. of 1/2" hose • 5,000 PSI max. • Replacement for 5790142 A) 3,000 PSI 99 • 3/8" FNPT inlet x 3/8" FNPT 5790142 – Wt. 16.2 lbs. . . . . . . . . . . . . . . . . . . 8194672 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . B) 4,000 PSI 99 8055908 – Wt. 11.5 lbs. . . . . . . . . . . . . . . . . . .

59 79

1499

HOSE & REELS

PRESSURE WASHER HOSE REELS

4499 4499

PRESSURE WASHER CART

PRESSURE WASHER HOSE

3,000 PSI • 1 swivel fitting and 1 solid fitting • 3/8" NPT male ends with bend guards • Working temp. 4°C to 121°C (40°F to 250°F) allows use with either hot or cold water units Length 30 ft. 50 ft. 75 ft. 100 ft.

Wt. (lbs.) 6.3 10.4 15.8 20.9

ITEM 8027235 8027244 8027253 8027262

PRICE 49.99 79.99 114.99 139.99

• 20" x 13-1/2" base • Large 13/5.00 x 6 pneumatic tires • Pre-drilled for nozzle and engine mounting • Handle angle can be adjusted 5790094 – 40.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

9999

HOSE ADAPTERS & CONNECTORS F

F) GARDEN HOSE ADAPTER Female garden hose x 1/2" FNPT. 8051207 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . G) QUICK CHANGE NIPPLE 4,000 PSI max. Wt. 0.1 lbs.

8032434 – 1/4" FNPT x M22-1.5 8032443 – 3/8" FNPT x M22-1.5 . . . . . . . .

H) QUICK CHANGE CONNECTOR BODY 4,000 PSI max. Wt. 0.2 lbs.

8194425 – 1/4" FNPT x M22-1.5 99 8194433 – 3/8" FNPT x M22-1.5 . . . . . . . /ea. I) QUICK COUPLER 3/8" MNPT x M22-1.5 99 99 /ea. 8194441 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

TELESCOPING PRESSURE WASHER WAND

• Ideal way to clean buildings, trucks, signs, and other large equipment • 1/4" QCF body • 3/8" QCM plug • Max. flow: 8 GPM @ 4,000 PSI • Max. temp.: 95°C (200°F) • Max. 18 ft. • Collapses to 6 ft. 6" 8006835 – Wt. 9.7 lbs. . . . . . . . . . . . . . . . . . . .

TELESCOPING WAND BELT KIT • Support belt for extension wands • Takes stress off the arms and body • Easy clip release belt buckle lets you attach and detach the extension wand without removing the harness 99 8116550 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

1499

121

CONNECTORS & WASHING GUNS

QUICK COUPLERS

INLET WATER STRAINERS

B D

A) BRASS SOCKETS Thread PSI GPM Wt. (lbs.) 1/4" Male 4,000 6 0.2 3/8" Female 4,000 10 0.3 3/8" Male 4,000 10 0.3

ITEM PRICE 8032498 5.99 8032522 5.99 8032531 5.99

B) STEEL PLUGS Wt. PSI GPM (lbs.) 1/4" Male 4,000 6 0.1 3/8" Female 4,000 10 0.1 3/8" Male 4,000 10 0.1 Thread

ITEM PRICE 8032513 8032540 8032559

2.49 2.49 2.49

C) 1/4" QUICK COUPLER SET • 1/4" QCF body • 1/4" QCM plug 8006987 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . D) INLET WATER STRAINER 1/2" NPT fittings, 75 mesh strainer. 8194557 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

699

1999

E) INLET WATER STRAINER 3/4" NPT fittings, 50 mesh strainer. 8116675 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

1699

PRESSURE WASHER GUNS F

• High impact nylon handle remains comfortable while spraying hot or cold water • All guns have a max. temp. of 150°C (300°F) Flow GPM Max. PSI Inlet NPT Outlet NPT Wt. (lbs.) ITEM 7.0 2,950 3/8" 1/4" 1.0 8057473 F 7.0 4,000 3/8" 1/4" 1.1 8194474 G 12.0 4,000 3/8" 1/4" 1.6 8194482 H 7.0 5,000 3/8" 1/4" 1.7 8057481 I

PRICE 19.99 29.99 38.99 29.99

PRESSURE WASHER WANDS J

• 1/4" MNPT inlet • 1/4" QCF body outlet (excluding #8057101) • 4,000 PSI max., 10.5 GPM max. flow • Max. temp: 150°C (300°F)

122

J J K K K K

Lance Style Length Wt. (lbs.) Straight 18" 0.6 Straight 47" 1.9 Bent tip 28" 1.1 Bent tip 36" 1.4 Bent tip 59" 2.2 Bent tip 79" 2.7

ITEM PRICE 8057101 4.99 8057135 15.99 8052136 9.99 8057168 13.99 8057184 19.99 8057192 22.99

L) 29" GUTTER CLEANER LANCE • 1/4" QCM inlet • 1/4" QCF outlet • Ideal way to clean things such as gutters and RV tops without the need of a ladder 8116949 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . M) 18-1/2" FLEXIBLE WAND • 2,250 PSI, 1/4" NPT male ends • Flex action to access hard to reach areas 8116956 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . N) DOUBLE INSULATED LANCE 41" long with low/high pressure switching handle for soap applications. 8194524 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

1499 1999 4999

2-1/2" STAINLESS STEEL GAUGE

• 3/8" QCF x 3/8" QCM connections • 0 to 5,000 PSI 2-1/2" gauge for mounting in-line on high pressure washer hose, for quick assessment of pressure output 99 8006843 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

• 1/4" MNPT inlet • Pressure: 0 to 4,000 PSI (28,000 kPa) • Scale shows PSI and kPa (kilopascal) • Liquid filled gauges are recommended for reducing shock caused by pressure fluctuations or vibrations 99 8006831 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

HIGH PRESSURE SPRAY NOZZLE SELECTION Approximate Gallons Per Minute (GPM) Orifice 800 1000 1200 1500 2000 2500 3000 3500 4000 Size PSI PSI PSI PSI PSI PSI PSI PSI PSI 3.0 1.4 1.5 1.6 1.8 2.1 2.4 2.6 2.7 2.8 4.0 1.8 2.0 2.2 2.5 2.8 3.1 3.5 3.8 4.0 4.5 2.0 2.2 2.4 2.8 3.0 3.6 3.9 4.3 4.5 5.0 2.2 2.5 2.8 3.1 3.6 4.0 4.4 4.7 5.0

QUICK CONNECT SPRAY PATTERNS

A worn nozzle drastically reduces the maximum pressure output of a pressure washer. You will typically see a loss of pressure due to wear after 30 hours. To choose a replacement nozzle, follow the steps below:

GAUGES & NOZZLES

QUICK CONNECT IN-LINE GAUGE

1. Determine the correct orifice size. Many manufacturers will imprint a code. For example, “25040”, the “25” means a 25° spray angle and “040” means a 4.0 orifice size. 2. If your nozzles do not have any identification, use the chart. Read across the top to the “PSI” of your pressure washer.

0° (red) – 8118416 8118424 8118432 8118440

15° (yellow) 8118457 8118465 8118473 8118481 8118499

25° (green) 8118507 8118515 8118523 8118531 8118549

40° (white) 8118556 8118564 8118572 8118598 8118606

Orifice Size 3.0 3.5 4.0 4.5 5.0

3. Read down the column to the GPM of your pressure washer. The correct orifice size is the number in the far left column. 4. Now that you have the correct orifice size, using the chart to the right, read down the first column to the orifice you have. Then read across to find the item number for the spray angle you require.

LOW PRESSURE SOAP NOZZLE • Quick change nozzles give you the flexibility to change tips for different spray angles quickly from a high impact 0° stream to a flat 40° fan • Colour coded nozzle guards identify the nozzle type and help protect the nozzle and the surface being sprayed from contact damage • Hardened stainless steel construction for increased durability • 4,000 PSI max. 49 PRICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . /ea.

TURBO ROTATING 0° NOZZLE • Max. temp. 80°C (176°F) • 1/4" FNPT inlet • Reduces the time needed to do a job by providing all the impact of a regular 0° nozzle, but with 15° of coverage Orifice Max. Pressure 4.0 2500 PSI 4.5 3000 PSI 4.5 3650 PSI

Wt. ITEM PRICE 0.5 8194607 39.99 0.6 8194615 69.99 1.0 8195620 99.99

• #40 orifice • 65° spray pattern (black) 8118846 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

649

DRAIN CLEANING NOZZLE • 1/4" FNPT inlet • Hose is fed into plugged drain while attached to pressure washer and nozzle is pushed into blockage • When trigger is pressed, water is forced through nozzle orifice and through extra holes in back of nozzle, blowing apart clog 99 8195612 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

VARIABLE FAN NOZZLES • Max. pressure: 3,000 PSI • Max. temp: 100°C (210°F) • 1/4" FNPT inlet • Fan pattern adjustment from 0° to 50° • Push/pull for high to low pressure Orifice 3.0 4.0 4.5

Flow Range 1.5 - 2.6 GPM 2.9 - 3.9 GPM 4.2 - 5.5 GPM

Wt. 0.4 0.4 0.4

ITEM 8032452 8201287 8201295

PRICE 29.99 29.99 29.99

123

PRESSURE WASHER DETERGENT & ACCESSORIES

HIGH PRESSURE ROTARY BRUSH

3 NOZZLE WATER BROOM

• 1/4" QCM plug attaches to standard pressure washer lance • 3 x 65° nozzles with 12" coverage • Max. flow: 4 GPM @ 4,000 PSI • Max. temp: 82.2°C (180°F) 8006841 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . .

GENERAL PURPOSE CLEANING CHEMICALS

GENERAL PURPOSE PRESSURE WASHER DETERGENTS & DEGREASERS CAN BE DILUTED UP TO 40:1.

• Rotary brushes provide friction and pressure to force off stuck-on grime and film • 1/4" QCM plug attaches to standard pressure washer lance • 2.0 GPM min., 10.5 GPM max. @ 870 PSI • White nylon bristles for harder to clean areas 99 99 8195604 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

A) DETERGENT – 4 LITRES • Biodegradable and safe on painted surfaces including plastics, concrete, and wood • Applications include: pressure washing vehicle and building exteriors, decks, and driveways 8203093 – Wt. 8.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) DEGREASER – 4 LITRES • 100% water soluble, requires no solvent and is non-flammable • Concentrated solution for applications including: pressure washer degreasing and cleaning of engines, machinery, concrete, tires, etc. • Contains corrosion inhibitors 8195455 – Wt. 8.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

HEAVY DUTY CLEANING CHEMICALS E

C D

HEAVY DUTY & PREMIUM PRESSURE WASHER CLEANING CHEMICALS ARE HIGHLY CONCENTRATED SOLUTIONS SUITABLE FOR DILUTING UP TO 80:1.

C) POWERWASH DETERGENT • A concentrated biodegradable detergent for use with cold or hot water pressure washers • Applications include: vehicle exteriors, industrial and farm equipment, dairy, chicken and hog production facilities, building exteriors, decks, and driveways • Safe on painted surfaces, plastics, concrete, and wood • Can be diluted up to 80:1 4 LITRE JUG 99 8195463 – Wt. 9.2 lbs. . . . . . . . . . . . . . . . . . . . 20 LITRE PAIL 99 8195489 – Wt. 47.8 lbs. . . . . . . . . . . . . . . . . . .

12 59

124

NOTE: PRESSURE WASHER DETERGENTS ARE HAZARDOUS GOODS & CANNOT BE SHIPPED. PLEASE VISIT YOUR LOCAL PRINCESS AUTO STORE TO PURCHASE.

D) PREMIUM CITRUS POWERWASH - 4 LITRES • Our regular Powerwash Detergent formula, fortified with a non-corrosive, citrus solvent water based degreaser • Removes oil and grease from the toughest jobs • Safe on painted surfaces • Can be diluted up to 80:1 99 8154262 – Wt. 9.0 lbs. . . . . . . . . . . . . . . . . . . . E) INDUSTRIAL DEGREASER • 100% water soluble, non-flammable industrial strength degreaser requires no solvent and contains corrosion inhibitors • Rinses clean, leaves no film or offensive odour • Apps. include: steam cleaners, cleaning off-road equipment, and other jobs with hard to remove grease and dirt • Can be diluted up to 80:1 4 LITRE JUG 99 8195497 – Wt. 9.1 lbs. . . . . . . . . . . . . . . . . . . . 20 LITRE PAIL 99 8195513 – Wt. 44.8 lbs. . . . . . . . . . . . . . . . . . .

12 59

AIR COMPRESSORS

AIR COMPRESSORS 5 HP LIGHT INDUSTRIAL AIR COMPRESSOR

• Single stage, 3-cylinder cast iron pump • 18.5 CFM @ 100 PSI; 140 PSI max. • True “running” 5 HP small frame, thermally protected motor, no magnetic starter required • 230 V • 60 gallon tank • Easy to read oil level indicator • Large cooling fan plus finned intercoolers for cooler running • Each cylinder is protected by its own filter • Heavy duty metal belt guard • Pump up time: 4.63 min. 0 to 140 PSI • Recovery time: 48 sec 115 to 140 PSI 99 8005985 – Wt. 300.0 lbs. . . . . . . .

979

5 HP INDUSTRIAL 2-STAGE AIR COMPRESSOR

• 2-stage, 2-cylinder industrial duty cast iron pump • 18 CFM @ 100 PSI, 16.9 CFM @ 175 PSI; 175 PSI max. • 5 HP single phase electric motor - magnetic motor starter required (see page 130 for complete listing) • 80 gallon tank • Precision cast steel crankshaft and connecting rods • Swedish stainless steel valves • Centrifugal unloader for loadless start • Pump up time: 9 min 0 to 175 PSI • Recovery time: 1.72 min 135 to 175 PSI VERTICAL TANK O’all dim.: 32" x 24" x 72". 8048381 – Wt. 554.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

169999

125

AIR COMPRESSORS

10 HP INDUSTRIAL 2-STAGE COMPRESSOR

NOT AVAILABLE IN ALL STORES. PLEASE ALLOW 2 WEEKS FOR DELIVERY.

• 2-stage, 4 cylinder industrial duty cast iron pump • 35 CFM @ 100 PSI, 31 CFM @ 175 PSI; 175 PSI max. • Magnetic motor starter required (see page 130 for complete listing) • 120 gallon horizontal tank • Precision cast steel crankshaft and connecting rods • Swedish stainless steel valves • Centrifugal unloader for loadless start • Pump up time: 5.5 min 0 to 175 PSI • Recovery time: 1 min 135 to 175 PSI 8064198 – Wt. 935.0 lbs. . . . . . . . . . .

259999

SPECIAL ORDER COMPRESSORS See your nearest Princess Auto location or call: 1-800-665-8685 for details. Type

Wt. (lbs.)

ITEM

PRICE

575V 3-phase

935.0

230V single phase

888.0

8064156 8064248

2599.99 2999.99

11 HP 2-STAGE TRUCK MOUNT COMPRESSOR

• 2-stage, 2-cylinder industrial duty cast iron pump • 18 CFM @ 100 PSI, 16.9 CFM @ 175 PSI; 175 PSI max. • 11 HP Honda gas engine with electric start and oil alert • Continuous run unloader with idle control feature • 30 gallon truck mount horizontal tank • Precision cast steel crankshaft and connecting rods • Swedish stainless steel valves • Centrifugal unloader for loadless starting • Pump up time: 2.73 min. 0 to 175 PSI • Recovery time: 28 sec. 135 to 175 PSI • Heavy duty metal belt guard 8041212 – Wt. 440.0 lbs. . . . . . . . . . . . .

199999

9 HP GAS POWERED WHEELBARROW COMPRESSOR

126

• Single stage, 3-cylinder cast iron pump • 18.5 CFM @ 100 PSI, 16 CFM @ 140 PSI; 140 PSI max. • 9 HP Honda gas engine with oil alert • Continuous run unloader with idle control feature • Two 5 gallon tanks on a wheelbarrow style chassis with a pneumatic tire • Easy to read oil level indicator • Large cooling fan plus finned intercoolers for cooler running • Each cylinder is protected by its own filter • Heavy duty metal belt guard • Pump up time: 40 sec., 0 to 140 PSI • Recovery time: 10 sec., 115 to 140 PSI 99 8048530 – Wt. 235.0 lbs. . . . . . . . . . .

1499

AIR COMPRESSORS

B C

TANK “USEFUL AIR” – A typical compressor has a maximum pressure of 125 PSI and delivers 35 PSI of available useful air before a 90 PSI rated tool begins to underperform (125 PSI – 90 PSI = 35 PSI). Porter-Cable compressors deliver higher PSI and more useful air for longer tool run time. PUMP “BONUS AIR” – Recovery of a 125 PSI compressor begins when the tank pressure drops to 100 PSI, just 10 PSI before a tool with a 90 PSI rating starts to underperform. Porter-Cable compressors with slightly higher PSI will begin recovery at a higher level, thereby providing more bonus air before the tool starts to underperform.

HIGH-FLO REGULATORS & QUICK CONNECTS – Porter-Cable regulators and quick connects are designed with oversized ports to minimize PSI and SCFM drop resulting in maximum tool performance.

C) 1.6 HP 25 GALLON • Vertical • 2-stage, direct-drive, twin cylinder, oil free design for durability and no maintenance • 175 PSI tank pressure for longer tool A) 1.1 HP 17 GALLON run time • Vertical • 1,725 RPM motor for longer life and quieter • Single stage, direct-drive, oil free pump for operation no maintenance or spilled oil • 82 dB quiet operation • 1 year warranty 99 • 3 year warranty 99 8200537 – Wt. 76.0 lbs. . . . . . . . . . . . . . . 8099145 – Wt. 150.0 lbs. . . . . . . . . . . . . B) 1.7 HP 25 GALLON D) 3 HP 60 GALLON • Vertical • Vertical • Single stage, direct-drive, oil free pump for • Single stage, oil lubricated, twin-V cast iron no maintenance or spilled oil pump for long life • 1 year warranty 99 • 89 dB 8099194 – Wt. 124.0 lbs. . . . . . . . . . . . . • 2 year warranty 99 8099111 – Wt. 246.0 lbs. . . . . . . . . . . . .

279

569

409

A B D E

HP CFM @ (Running) 40/90 PSI 1.1 7.7/5.3 1.7 7.7/5.4 1.6 5.6/5.1 3 12.3/10.4

Tank cap. (gal.) 17 25 25 60

Motor (volt) 120 120 120 240

649

Max. pressure (PSI) 150 150 175 135

Wt. (lbs.) 76.0 124.0 150.0 246.0

ITEM

PRICE

8200537 8099194 8099145 8099111

279.99 409.99 569.99 649.99

127

AIR COMPRESSORS & COMPONENTS

PORTABLE COMPRESSORS As always, every compressor is backed by our Royal Service Promise: No Sale is Final Until You're Satisfied. • Suitable for light duty applications and general household use • Includes regulator and dual gauges • Direct drive pump • Rust resistant powder coat finish OIL LUBRICATED DIRECT DRIVE PUMP: • Quieter running than oil-free compressors • Max. pressure: 115 PSI

A B C D

Running CFM @ Tank Peak HP 40/90 PSI Cap.(gal.) Style HP 3/4 1-1/2 2.6/2.1 2.0 Hot Dog 1-1/2 2 5.0/4.0 3.5 Pancake 1-1/2 2 5.0/4.0 4.6 Twin Stack 1-1/2 2 5.0/4.0 8.0 Horizontal

Wt. (lbs.) 39.7 62.8 65.1 70.4

ITEM

PRICE

8132904 8132938 8132920 8100695

124.99 154.99 159.99 199.99

PORTABLE COMPRESSOR FILTER Replacement filter for 8132904/8132920/8132938. 8205700 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

TECH TIP

128

Is it okay to use an extension cord with an air compressor? Princess Auto does NOT recommend using an extension cord with an air compressor. All extension cords can create a power loss, which could lead to overheating and burnout of the electrical motor. Always use an air hose instead, to extend the reach of your air compressor. Air hose is generally less expensive than an extension cord and will not damage the compressor motor. If the use of an extension cord is unavoidable, make certain that the appropriate gauge of wire is used.

PORTABLE AIR TANKS

• ISO 68, SAE 25 weight oil • Tanks include gauge, hose, and tire chuck • For single or 2-stage compressors • Working pressure: 85 to 125 PSI • Reduces heat and prevents rust • 1.2 m (4 ft.) hose and oxidation Cap. Wt. Size • Cannot be shipped (US) (lbs.) ITEM PRICE 1 LITRE 99 5 Gal. 10-1/4"W x 14-5/8"L x 13"H 15.8 8155459 37.99 8002412 – Wt. 2.1 lbs. . . . . . . . . 7 Gal. 10-1/2"W x 22"L x 13"H 19.6 8155467 44.99 4 LITRE 99 8039268 – Wt. 8.1 lbs. . . . . . 11 Gal. 12-1/4"W x 25"L x 14-3/4"H 27.7 8155491 59.99

5 16

SINGLE STAGE COMPRESSOR PUMPS

AIR COMPRESSOR PUMPS

AIR COMPRESSOR OIL

1,400 RPM Max. # of Flywheel HP Performance Cyl. Dia. Range 8.6" .25 to 1 2.5 CFM @ 1,400 RPM @ 90 PSI A 1 10.5" .05 to 2 5.5 CFM @ 1,400 RPM @ 90 PSI B 1 12" 1 to 2.5 11 CFM @ 1,400 RPM @ 90 PSI C 2 12" 1.5 to 4.5 13.8 CFM @ 1,400 RPM @ 90 PSI C 2 12" 1.5 to 3 9.0 CFM @ 1,200 RPM @ 90 PSI D 2 12.5" 3 to 5 18.5 CFM @ 1,230 RPM @ 100 PSI E 3 A, B, D, E: Cast iron pump C: Cast steel pump

E Max. PSI 145 145 155 145 155 155

Wt. (lbs.) 20.2 43.2 55.3 56.4 47.9 81.5

ITEM

PRICE

8059339 8059347 8059420 8059404 8059354 8007272

79.99 129.99 199.99 219.99 199.99 399.99

REPLACEMENT FILTERS Compressor 8059339/8059347 8007272/8059354

Wt. (lbs.) ITEM PRICE 0.2 8099053 12.99 0.3 8099079 12.99

Compressor 8039776/8059396 8059404/8059420

Wt. (lbs.) ITEM PRICE 0.6 8099087 18.99 0.1 8099095 3.99

5 to 7.5 HP 2-STAGE 2-CYLINDER COMPRESSOR PUMP • Heavy duty cast iron construction, suitable for industrial applications • Precision cast steel crankshaft and connecting rods • Swedish stainless steel valves • Centrifugal unloader for loadless start • Cast iron finned cooler and after cooler • High quality, USA made gaskets • 17" dia. flywheel • 16.9 CFM @ 710 RPM @175 PSI with 5 HP motor • 540 RPM min., 1,120 RPM max. 8039776 – Wt. 250.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49999

129

AIR COMPRESSOR TANKS & COMPONENTS

AIR COMPRESSOR TANKS • ASME approved • 20 gallon unit comes with wheel mounts • 60 gallon unit comes with 3 welded legs • All are primed and come with motor and pump mounting plates A) 20 GALLON CAP. TANK • Max. pressure: 125 PSI • Tank size: 14" x 33" • Mounting plate: 7-3/4" x 22-5/8" 0430603 – Wt. 66.9 lbs. . . . . . . . . . . . . . . . . . . B) 60 GALLON CAP. TANK • Max. pressure: 150 PSI • Tank size: 20" x 48" • Mounting plate: 9-1/2" x 27" 8068876 – Wt. 135.0 lbs. . . . . . . . . . . . . . . . . .

27999 43999

MAGNETIC STARTERS & HEATERS • Used to provide thermal protection for our industrial air compressor motors (where required) • Please see the chart below for the appropriate starter and heater combinations STARTERS 115 V 230 V Single Phase Single Phase 3 HP 10 HP 3 HP 7.5 HP

230 3-Phase – 10 HP

460/575 V 3-Phase – 20 HP

Coil Voltage

ITEM #

PRICE

120 VAC 120 VAC

8050775 8050783

14999

MAGNETIC HEATERS Rating # of heaters HP Phase Volts Amps Heater (Amps) required .5 1 230 22 20.9-23.1 1 7.5 1 230 29 27-31.4 1 5 3 230 14 12.3-14.4 3 10 3 230 26.8 23.4-27.9 3 10 3 460 13.4 12.3-14.4 3 10 3 575 10.3 9.75-10.7 3

Use with Used with starter Compressor 8050775 8048373, 8048381 8050775 8057721 8050783 8048522 8050783 8064198 8050783 8064198 8050783 8064156

ITEM PRICE 8050940 8050957 8051054 8050957 8051054 8050726

1199

PRESSURE SWITCHES

@ 40-100 Off 100 @ 70-150 Off 125 Off @ 70-150 125 @ 100-200 Off 175

20 non- Auto- Yes adjust. off 30 non- Auto- No adjust. off 30 non- AutoYes adjust. off 40 non- No No adjust.

230 115 230 460/575 VAC VAC VAC VAC

PRICE

115 VAC

3-Phase HP Rating

ITEM

Single Phase HP Rating

Wt. (lbs.)

Bleeder Valve

Cut-Out Lever

Pressure Differential

Adjustable Pressure Range (PSI) Factory Setting (PSI)

• Diaphragm actuated, suitable for air compressor applications • Pressure switches have CEMA 1 enclosures, 1/4" female NPT ports

1.5 HP 2 HP 2 HP 3 HP

1 HP

0.9 8054454 34.99

1.5 HP 2 HP 2 HP 3 HP

1 HP

0.9 8054447 19.99

1.5 HP 2 HP 2 HP 3 HP

1 HP

0.9 8050742 34.99

1.5 HP 2 HP 2 HP 3 HP

1 HP

0.9 8050759 24.99

PRESSURE SWITCHES

130

Factory Setting (PSI)

3-Phase HP Rating ITEM PRICE 115 230 VAC VAC 3 HP 5 HP 1.0 8131351 19.99 3 HP 5 HP 1.0 8131377 19.99 3 HP 5 HP 1.0 8131385 19.99 Wt. (lbs.)

• 1/4" NPT female ports • 4-way valve • On/Off switch and bleeder valve

Single Phase HP Rating 115 230 VAC VAC 20 to 135 80 to 115 1.5 HP 3 HP 65 to 175 100 to 140 1.5 HP 3 HP 105 to 175 135 to 175 1.5 HP 3 HP

Adjustable Pressure Range (PSI)

AUTO/MANUAL AIR TANK DRAIN

• For gas engine compressors • Releases unused air for continuous running applications • Idles engine down when tank is full Wt. 1.1 lbs.

0430471 – 5 HP 0430469 – 10 HP . . . . . . . . . . . . . . . . . . . . .

• Automatically drains moisture from air compressor tank when pressure is released • Can also be manually drained while tank is pressurized • 300 PSI max. • 1/4" NPT fitting 99 /ea. 8062622 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

1799

THROTTLE CABLES 30" THROTTLE CABLE 7040294 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . 48" THROTTLE CABLE 7040301 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

2099 3199

COMPRESSOR ACCESSORIES A) 1/4" BRASS DRAIN COCK For compressor tanks. 8002040 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 2 PK AIR VALVE • Excellent for admitting air into air tanks and pumps used on pneumatic water systems • 1/8" NPT connection 0430253 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . C) BRASS SHUT-OFF VALVE 1/4" NPT female x 1/4" NPT male. 0430041 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . D) RELIEF VALVE • Pressure setting: 100 PSI • 1/4" NPT male 0430967 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

GAUGES & ACCESSORIES

AIR COMPRESSOR GOVERNOR / UNLOADER

499

849

E) POP SAFETY VALVE • Registered in all Canadian provinces • Preset, tested, and sealed at factory 99 • Pressure setting: 150 PSI 0430215 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

VACUUM GAUGE

1699

AIR PRESSURE GAUGES BOTTOM MOUNT

• 2" dial • Dial reads 0 to 30 Hg • 1/4" NPT bottom connection 8070385 – Wt. 0.2 lbs. . . . . . . . . . .

BACK MOUNT

699 • Metal back • 2" dia.

FLEXIBLE COPPER TUBING

O.D. Wt. (lbs.) ITEM 1/4" 0.1 8133134 3/8" 0.1 8133142 1/2" 0.2 8133159

Wt. 0.2 lbs.

PRICE 0.99/ft. 1.49/ft. 1.99/ft.

Reading Thread Size 0-160 PSI, 0-11 kg/cm2 1/8" NPT F 0-160 PSI, 0-11 kg/cm2 1/4" NPT 0-200 PSI, 0-14 kg/cm2 1/4" NPT 0-100 PSI, 0-7 kg/cm2 1/4" NPT 0-160 PSI, 0-11 kg/cm2 1/4" NPT G 0-200 PSI, 0-14 kg/cm2 1/4" NPT 0-300 PSI, 0-21 kg/cm2 1/4" NPT

ITEM PRICE 8070344 99 8070310 8070328 8070336 8070351 99 8070369 8070377

4 4

BRASS FITTINGS PIPE PLUGS

PIPE COUPLINGS

CLOSE NIPPLE

Wt. 0.1 lbs.

Size 1/8" 1/4" 3/8"

ITEM 0400259 0400267 0400275

PRICE 0.69/ea. 0.79/ea. 1.39/ea.

Wt. 0.1 lbs.

Size 1/4" NPT 3/8" NPT

ITEM 0400184 0400192

PRICE 1.99/ea. 2.19/ea.

3/8" NPT. Wt. 0.1 lbs.

0400242 . . . . . . .

99¢/ea.

131

FITTINGS & COUPLERS

COMPRESSION FITTINGS

COMPRESSION SLEEVES

Includes: fitting, nut and compression sleeve. Wt 0.1 lbs.

Tube Size 1/4" O.D. 1/4" O.D. 3/8" O.D. 1/2" O.D. 1/2" O.D.

Pipe Size 1/8" NPT 1/4" NPT 3/8" NPT 3/8" NPT 1/2" NPT

FEMALE ELBOWS

ITEM 0400002 0400044 0400069 0400077 0400001

PRICE 0.99/ea. 1.29/ea. 1.99/ea. 2.19/ea. 2.99/ea.

Pkg. of 4. Wt. 0.1 lbs.

O.D. 1/4" 3/8" 1/2"

BUSHINGS

ITEM 8133167 8133175 8133183

PRICE 1.09/pkg. 1.19/pkg. 1.79/pkg.

FEMALE TEES

Wt. 0.1 lbs. Wt. 0.1 lbs.

Size ITEM PRICE 1/4" NPT 0400143 3.29/ea. 3/8" NPT 0400150 3.59/ea.

Size (NPT) 1/4"M x 1/8"F 3/8"M x 1/4"F 1/2"M x 1/4"F 1/2"M x 3/8"F

ITEM 0400200 0400218 0400226 0400234

PRICE 0.79/ea. Wt. 0.1 lbs. Size ITEM PRICE 0.99/ea. 1.69/ea. 1/4" NPT 0400168 3.29/ea. 1.69/ea. 3/8" NPT 0400176 4.99/ea.

ADAPTERS

HOSE BARBS Wt. 0.1 lbs.

Hose 1/4" I.D. 3/8" I.D. 3/8" I.D. 1/2" I.D.

Male End Size 1/4" NPT 1/4" NPT 3/8" NPT 3/8" NPT

ITEM 0431635 0431643 0431650 0431668

PRICE 1.99/pr. 2.19/pr. 2.49/pr. 2.49/pr.

Hose Female End Size ITEM PRICE 1/4" I.D. 1/4" NPT 0431676 2.69/pr. 3/8" I.D. 1/4" NPT 0431684 2.99/pr.

HOSE MENDERS

• 1/4" male x 3/8" female NPT • Pkg. of 2 99 /pkg. 0439927 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . INDIVIDUAL ADAPTERS – Wt. 0.1 lbs. Size (NPT) ITEM PRICE 1/8"M x 1/4"F 1.99/ea. 0430010 1/4"M x 3/8"F 2.49/ea. 0430037 3/8"M x 1/2"F 2.49/ea. 0430008

SWIVEL ADAPTER

Wt. 0.1 lbs.

Hose 1/4" x 1/4" I.D. 3/8" x 3/8" I.D. 1/2" x 1/2" I.D.

ITEM 0431692 0431700 0430237

PRICE 2.59/ea. 2.59/ea. 3.49/ea.

• Swivels to prevent kinks in air hose • 1/4" NPT connections • 150 PSI max. • Steel construction 0434019 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

CONNECTORS

“M” STYLE QUICK COUPLER SETS

A) MALE • 1/4" x 1/4" male NPT B • Pkg. of 2 8002513 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . B) FEMALE • 1/4" x 1/4" female NPT • Pkg. of 2 8002514 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

999

199/pkg.

2 PACK MALE COUPLER PLUGS 1/4" NPT thread. 99 8057522 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . SWIVEL QUICK COUPLERS 4 PC QUICK COUPLER SET Includes: 1/4" NPT male x male connector; 1/4" NPT female body; 1/4" NPT male plug; 1/4" NPT female plug. 79 8057327 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . • Convenient all in one design eliminates need 5 PC QUICK COUPLER SET (SHOWN) for separate swivel fitting and quick coupler Includes: 1/4" NPT female coupler body, • 360° swivel end allows for unrestricted three 1/4" NPT male plugs, movement 1/4" NPT female plug. • “M” or “A” style quick coupler plug ends 99 8002436 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . covers most common requirements • 1/4" NPT in both male and female thread types 12 PC “M” STYLE QUICK COUPLER KIT Wt. 0.1 lbs. 2 female couplers, 8 brass male tips, 8064552 – “A” STYLE MALE and 2 brass female tips. 99 99 8061806 – “M” STYLE MALE . . . . . . . . . . . /ea. 8036804 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

249/pkg.

2 5 7

132

1-INTO-3 QUICK COUPLER Perfect for use with our quick coupler tips.

• Fits “A”, “T”, “L”, and “M” style coupler plugs • 3 “M” style quick coupler outlets • Coupler has 1/4" NPT female port 99 • 1/4" NPT female inlet 0434779 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 0434191 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

D C E A STYLE

AIR QUICK COUPLERS

Interchanges with ARO style couplers. Port Gender Type ITEM PRICE O A 1/4" NPT Female body 0431957 9.99/ea. B 1/4" NPT Female plug 0430258 3.99/pr. C 1/4" NPT Male body 0430221 9.99/ea. CQ D 1/4" NPT Male plug 0430257 3.99/pr. E) 1/4" NPT female body, male plug. 99 0430375 . . . . . . . . . . . . . . . . . . . . . . . . . . . /set M STYLE Port 5 PC “A” STYLE 1/4" NPT Includes: one 1/4" NPT female body, three O 3/8" NPT male, one female 1/4" NPT plugs. 99 1/4" NPT 0430139 – Wt. 0.4 lbs. . . . . . . . . . . . . . . /set P 3/8" NPT Q 1/4" NPT 1/4" NPT G F R 3/8" NPT

M L L STYLE Lincoln style coupler. Port Gender L 1/4" NPT Female M 1/4" NPT Female N 1/4" NPT Male

N Type body plug plug

3 WAY COUPLER • Accepts the 3 most popular 1/4" NPT style plugs A, M, and T • 1/4" NPT female body 0430219 . . . . . . . . . . . . . . . . . . . . . . . . . . .

S Type body body plug plug body plug plug

ITEM 0431742 8039188 0430255 8039222 0432708 0430254 8039231

PRICE 6.99/ea. 8.99/ea. 3.49/pr. 4.99/pr. 7.99/ea. 3.49/pr. 4.99/pr.

13 15

V W PRICE P STYLE 15.99/ea. True-Flate style for higher air flow. 6.49/pr. Port Type ITEM PRICE 6.49/pr. 1/4" NPT body 0432724 14.99/ea. T 3/8" NPT body 0431817 14.99/ea. 1/4" NPT plug 0430267 6.49/pr. U 3/8" NPT plug 0430265 6.49/pr. 1/4" NPT plug 0430266 5.99/pr. V 3/8" NPT plug 0430263 5.99/pr. W 3/8" NPT body 0432732 14.99/ea. PRICE 13.99/ea. Y X 5.49/pr. 5.49/pr. Z T STYLE Interchanges with True-Flate, Parker Hannifin style couplers. Port Gender Type ITEM PRICE X 1/4" NPT Female body 0433144 8.49/ea. Y 1/4" NPT Female plug 0430260 3.49/pr. 99 /ea. Z 1/4" NPT Male plug 0430259 3.49/pr.

ITEM 0431783 0430262 0430261

S) 1/4" NPT female body & male plug. 99 0430140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . /set 5 PC “M” STYLE PRICE Includes: one 1/4" NPT female body, three 18.99/ea. male, & one female 1/4" NPT plugs. 99 /set 4.99/ea. 0430137 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . 18.99/ea. 7 PC “M” STYLE 4.99/ea. Includes: one 1/4" NPT female body, three male, & three female 1/4" NPT plugs. 99 0430138 – Wt. 0.5 lbs. . . . . . . . . . . . . . . /set

H STYLE • Where more air volume is needed • Industrial interchange coupler Port Gender Type ITEM J 3/8" NPT Female body 0432765 K 1/4" NPT Male plug 0430269 K 3/8" NPT Male plug 0430268

MALE FEMALE

Male

I H G STYLE 1/2" True-flate style coupler. Port Gender Type ITEM F 1/2" NPT Female body 0433169 G 1/2" NPT Female plug 0433193 H 1/2" NPT Male body 0433177 I 1/2" NPT Male plug 0433185

Female

11 14

1499

FITTINGS & COUPLERS

UNIVERSAL QUICK COUPLER

T 133

AIR HOSES & MANIFOLDS

1-INTO-3 BRASS AIR MANIFOLD

AIR TANK MANIFOLD

• No need to connect and disconnect every time you want to change tools • Supply 3 air tools from 1 outlet • 1 inlet with three 1/4" NPT female outlets 99 0430465 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Filler air valve • 1/2" NPT male tank mount • Manual shut-off to prevent leaks • 125 PSI safety relief valve • Ports for hose and gauge 8043663 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

999

AIR MANIFOLDS A All outlet ports are 1/4" NPT. Manifold Working Pressure 2:1 Size Safety Ratio 1/2" 120 PSI A 1/2" 120 PSI B 1" 200 PSI C

Inlet Port # of Outlet Ports Wt. (lbs.) 1/4" NPT 2 0.1 1/4" NPT 4 0.3 1/2" NPT 4 1.1

C ITEM

PRICE

0430424 0430426 0430429

3.49 4.99 16.99

AIR HOSE INDUSTRIAL RUBBER AIR HOSE

1/2" I.D.

3/8" I.D.

1/4" I.D.

• Abrasion and kink resistant synthetic rubber construction with spiral yarn reinforcement • Operating temperature: -40°C to 88°C (-40°F to 190°F) • Remains flexible at low temperature • 300 PSI working pressure (4:1 safety ratio) • 1/4" NPT male fittings Length Wt. (lbs.) ITEM PRICE 25 ft. 2.9 8003885 22.99 50 ft. 4.9 8003894 39.99 25 ft. 4.5 8003910 24.99 50 ft. 9.1 8003929 44.99 100 ft. 18.3 8003938 79.99 5.9 8039552 39.99 * 25 ft. 50 ft. 12.1 8039543 74.99 * 1/2" NPT

1/4" 1/2" 3/8" 1/4" NPT NPT NPT NPT

134

1/2" I.D.

3/8" I.D.

1/4" I.D.

• Engineered to be tough and flexible at very low temperatures • Abrasion and oil resistant, non-marking • Temperature range: -40° to 65°C (-40° to 150°F) • 1/4" NPT threaded male fittings Length Wt. (lbs.) ITEM PRICE 25 ft. 2.0 8002924 19.99 50 ft. 3.8 8002934 29.99 25 ft. 2.6 8002936 23.99 50 ft. 5.3 8002937 39.99 100 ft. 10.4 8002938 69.99 1/4" I.D.

• Lighter than rubber • Silicone free, oil resistant • Max. 300 PSI (4:1 safety ratio) • Non-marking Length Wt. (lbs.) ITEM PRICE 15 ft. 1.1 0430450 9.99 25 ft. 1.8 0430204 12.99 50 ft. 3.5 0430208 21.99 15 ft. 1.5 0430452 9.99 25 ft. 2.7 0430058 12.99 50 ft. 4.5 0430066 21.99 100 ft. 9.6 8004456 49.99 25 ft. 2.5 0430210 14.99 50 ft. 5.1 0430209 24.99 25 ft. 3.6 0430212 22.99 50 ft. 7.0 0430213 39.99

TUNDRA PVC AIR HOSE

3/8" I.D.

INDUSTRIAL PVC AIR HOSE

SWIVEL END WHIP HOSE • 2-1/2 ft. long • 300 PSI max. • Use between air tool and coupler • Protect coupler from impacts and reduces kinking and twisting of hose • 1 end has 1/4" NPT female fixed connection, other has 1/4" NPT male swivel connection 99 0430018 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

• 300 PSI max. • Ideal when you need a short length of ready made hose • Male fittings 1/4" NPT on both ends • 3/8" I.D. Length Wt. (lbs.) ITEM PRICE 25" 0.3 0430333 5.49 60" 0.6 0430334 6.49 75" 0.7 0430335 7.19

COILED POLYURETHANE AIR HOSE

• Canadian made, industrial quality • 1/4" NPT fittings • Flexible in a wide range of weather conditions • -40° to 82°C (-40° to 180°F) working temperature • Lightweight and compact • Max. working pressure: 160 PSI Wt. I.D. Length (lbs.) ITEM PRICE 15 ft. 0.9 8134504 17.99 1/4" 25 ft. 1.2 8134538 25.99 50 ft. 2.0 8134553 39.99 3/8" 25 ft. 2.6 8134603 39.99

COILED NYLON AIR HOSE

• Spring guards • Working pressure: 200 PSI max. • Resists oil, grease, corrosion, and abrasion • -40°C to 82°C (-40°F to 180°F) working temp. • 1/4" NPT male fittings Wt. I.D. Length (lbs.) ITEM PRICE 12-1/2 ft. 0.4 0430275 11.99 1/4" 25 ft. 0.6 0430276 16.99 50 ft. 1.0 0430277 22.99 3/8" 25 ft. 1.2 0430281 27.99

AIR HOSES & REELS

INDUSTRIAL PVC WHIP HOSE

POLYURETHANE COILED AIR HOSE

• Softer and more pliable than nylon • Superior retention quality and will not lose its “recoilability” • Stays soft and won't kink • Length: 25 ft. • Hose dia.: 1/4" • Fittings: 1/4" NPT 0431205 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

1299

AIR HOSE REELS INDUSTRIAL RETRACTABLE REELS with HOSE

A) 3/8" • Steel construction, corrosion resistant powder coating • Max. working pressure: 300 PSI • Solid 1" steel centre support shaft • Solid brass swivel joint • Can be mounted on ceiling, wall, bench, or truck • 4 direction non-snag rollers reduce hose wear 25 FT CAP (SHOWN) Includes: 3/8" x 25 ft. rubber hose. 99 8000520 – Wt. 22.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 50 FT CAP Includes: 3/8" x 50 ft. rubber hose. 99 0430445 – Wt. 53.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

169

B) 3/8" x 50 FT DOUBLE HOSE REEL • 3/8" x 50 ft. PVC hose • Impact resistant polypropylene housing • Max. pressure: 300 PSI • 3/8" NPT inlet 8001538 – Wt. 23.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

11999

135

AIR CHUCKS & TIRE INFLATORS

HAND CRANK REELS

A) HOSE REEL • Max. pressure: 300 PSI • Holds 100 ft. of 3/8" I.D. or 50 ft. of 1/2" I.D. hose • 1/4" NPT brass swivel inlet • Durable steel construction 99 8000539 – Wt. 9.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) HOSE REEL • Max. pressure: 300 PSI • Spring tension brake • 1/4" NPT brass swivel inlet • Steel construction with corrosion resistant powder coating HOLDS 50 FT of 3/8" I.D. HOSE 99 8002145 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

HOLDS 100 FT of 3/8" I.D. HOSE 0430377 – Wt. 10.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

4999

AIR CHUCKS

All chucks have 1/4" NPT female inlet. C) STANDARD AIR CHUCK Brass and white metal construction. 0430165 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . D) DUAL HEAD AIR CHUCK 0432625 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

All chucks have 1/4" NPT female inlet. E) DUAL HEAD AIR CHUCK 49 8037714 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . F) LOCK ON LEVERED TIRE CHUCK 99 120 PSI max. 0434365 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

3 9

499 449

TIRE INFLATORS G

G) PISTOL GRIP AIR INFLATOR • Gauge reads 0 to 220 PSI, 0 to 15 bar and 0 to 1,500 kPa • Chuck clip 99 0433797 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) AIR INFLATOR with COMPASS • 100 PSI pressure gauge • Compass on the top of housing • Deflating knob • Inflating needle, tapered nozzle included • "M" style plug included 99 8159543 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . I) COMFORT GRIP • Comfortable grip with easy squeeze trigger • 0 to 140 PSI (0 to 10 bar) gauge, with glow in the dark, rotating dial • Lock-on tire inflator with swivel hose connector • Handy storage compartment in grip which contains an inflator needle and multipurpose inflator tip 99 8059537 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

PISTOL GRIP TIRE INFLATOR

136

TIRE INFLATOR

• Automatic gauge displays tire pressure as air is added • Easy to read, magnified gauge • 2-1/4" gauge reads 0 to 140 PSI (0 to 10 bar) • Zinc die-cast construction with 15" air hose • Chuck clip 99 • Calibrated: 10 to 120 lbs. 99 0430135 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . 0432245 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . .

AIR DRYERS

17 PC AIR ACCESSORY KIT

Contains: Blow gun with safety nozzle, 1/4" NPT M-style brass quick coupler, two 1/4" NPT M-style steel female plug, four 1/4" NPT m-style steel male plug, two inflation needles, one tapered inflator nozzle, one dual head air chuck, one pen style tire gauge, one 1/4" NPTF x 1/4" NPTF brass connector, and two 1/4" NPTM x 1/4" NPTM brass connectors. 99 8164626 – Wt 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AIR FILTRATION DESICCANT AIR DRYER • Recommended for quality spray painting • Eliminates moisture from air supply for sandblasting and air tools • Operates without electricity or refrigeration • The only maintenance required is replacement of drying pellets every six months (pellets sold separately 0470011) • 17 CFM max. air flow • 175 PSI max. • 1/2" NPT ports • O’all length: 37" NOT DESIGNED FOR USE WITH BREATHING AIR NOT FOR COMMERCIAL APPLICATIONS 99 8055757 – Wt. 16.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AIR DRYER PELLETS For use with desiccant air dryers. 0470011 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . .

3199

TECH TIP Air being discharged from an air compressor can reach very high temperatures and can melt the drying pellets inside an air dryer. Mount your air dryer a minimum of 30 ft. from your compressor to allow the discharged air to cool to at least 38°C (100°F). Air dryer pellets break down over time and can contaminate your lines and air tools. To prevent contamination mount an in-line air filter downstream from the dryer.

IN-LINE DESICCANT AIR DRYER • Removes nearly all traces of dirt, dust, water vapour and oil vapour from compressed air • Disposable and replaceable silica gel desiccant changes from blue to dark pink when the filter needs to be replaced • Ideal for use with spray guns, blow guns or any tool where dry air is critical • Installs and functions in either direction • Maximum flow capacity: 5 CFM • Maximum pressure: 125 PSI • Temperature range: 5 to 54°C (40 to 130°F) • 1/4" NPT inlet • Includes one replacement desiccant recharge WARNING - This filter will collect moisture which could freeze and rupture if used below 0°C (32°F) 99 2 PC REPLACEMENT DESICCANT 8122236 – Wt. 0.1 lbs. . . . . . . . . . . . 8105470 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

137

AIR FILTRATION

1/2" INDUSTRIAL AIR FILTER, REGULATOR & LUBRICATOR

A Flow Pressure Rating Filter 100 CFM 0 to 250 PSI A B Regulator 100 CFM 10 to 250 PSI C Lubricator* 142 CFM 0 to 200 PSI

• Lightweight aluminum housing • 1/2" NPT ports * Metal bowl with sight glass

Operating Temperature 0 to 71°C (40 to 160°F) 0 to 48°C (40 to 120°F) 0 to 71°C (40 to 160°F)

Type

AIR PRESSURE REGULATORS

Wt. (lbs.) ITEM PRICE 1.9 8138869 59.99 1.1 8139107 64.99 1.7 8139081 64.99

• Operates from 0 to 130 PSI • Reads 0 to 230 PSI • 60 CFM @ 100 PSI • 1/4" NPT ports D) REGULATOR with GAUGE 0470006 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . E) REGULATOR with GAUGE and SHUT OFF VALVE 0450022 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

2499

2999

AIR FILTERS, REGULATORS and LUBRICATORS

• 150 PSI max. working pressure • Temperature range: 5°C to 60°C (41°F to 140°F) • Filters have 20 micron filtration • Acetate filter and lubricator bowls, 4 oz. cap. H • Regulators are diaphragm type and come with gauge

G Type F

Filter*

Regulator

Lubricator

Port Size 1/4" NPT 3/8" NPT 1/2" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/8" NPT

Flow Rating 60 CFM 70 CFM 100 CFM 60 CFM 80 CFM 100 CFM 65 CFM

Pressure 0 to 120 PSI 0 to 120 PSI 0 to 120 PSI 0 to 160 PSI 0 to 160 PSI 0 to 160 PSI 40 to 120 PSI

Wt. (lbs.) 0.8 0.8 0.8 1.2 1.2 1.2 0.8

ITEM 8185068 8185076 8185092 8185035 8185043 8185050 8185126

PRICE 23.99 23.99 24.99 27.99 27.99 29.99 19.99

* REPLACEMENT FILTER ELEMENT 0470682 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.99

COMBINATION AIR FILTER/ REGULATOR

IN-LINE AIR REGULATOR

Air ports: 1/4" NPT. 8159493 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

138

• Air inlet: 1/2" NPT (female) • Air outlet: 1/4" NPT (male) • Max. air flow: 50 CFM • Max. pressure: 150 PSI • Max. temp.: 66°C (150°F) • Aluminum housing 99 8006307 – Wt. 6.5 lbs. . .

799

TECH TIP When selecting a regulator, you should factor in the size of the regulator, flow capacity, and the pipe port size before making your purchase.

699

999

1/4" NPT ports. D) AIR LINE FILTER • Lightweight, can be installed on air tools, filters small particles from air supply • O’all dim.: 2-3/16" dia. x 2-3/4" long 99 0470012 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) AIR RESTRICTOR VALVE with GAUGE • In-line air restrictor with gauge can be used on most air tools to adjust volume • Gauge reads: 0 to 160 PSI and 0 to 11 kg/cm2 49 0430074 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AIR FILTRATION & BLOW GUNS

1/4" NPT ports. A) OIL and WATER SEPARATOR • Max. 125 PSI • Attaches in the airline between air supply and tool • Keeps damaging oil out of air supply, a must for painting 0433359 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) IN-LINE OILER • 1/4" NPT connections • Prevents air line contamination, tool burn out, and rust • Attach between air hose and tool 8038777 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) IN-LINE FILTER • Max. pressure: 150 PSI • Push button drain • O’all dim.: 3-1/2" x 1-1/2" 0470035 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SHORT NOSE BLOW GUNS

BLOW GUNS

G All blow guns listed below have 1/4" NPT inlet port. F) SAFETY LEVER BLOW GUN Complete with extra nozzle. 0432518 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . G) PLASTIC BLOW GUN With 4-1/2" metal nozzle. 8045894 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . H) CLEANING/BLOW GUN • Useful for spraying, degreasing, rust proofing, etc. • With aluminum nozzle • 8 ft. vinyl syphon hose 0430216 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . I) COMFORT GRIP BLOW GUN • Comfortable grip with easy squeeze trigger • 90 PSI max. operating pressure 8061665 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

399 H

699 I

999 999

J) AIR DUSTER • High volume air duster has triple the air volume J of regular blow guns • All metal construction 0430023 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

1299

AIR DRYER GUN

4 PC AIR DUSTER KIT

• Unique design increases air flow 10 to 1 • With in-line air regulator to adjust air flow • With 100 mesh screen • Handle with quick change 4-1/4" and 11" long • Working pressure: 43 PSI extension tube and brass nozzle • Max. pressure: 98 PSI • 1/4" NPT inlet 99 • Air consumption: 7 CFM 0430370 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . 8159592 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

2499

139

BLOW GUNS & ENGINE CLEANING

LONG NOSE BLOW GUNS A

B) TELESCOPING BLOW GUN Three section tube extends to 12-3/4". 0430391 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . C) BLOW GUN with ROTATING NOZZLE Nozzle rotates 360°. 0430444 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . D) TELESCOPING BLOW GUN • Pistol type body • Extension tube has a max. length of 13" 0430441 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . E) LONG BLOW GUN • 2 ft. extension • 1 safety and 1 rubber tip nozzle 0432351 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . E) EXTRA LONG BLOW GUN • 4 ft. extension • 1 safety and 1 rubber tip nozzle 0432369 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . .

899 899

1199

E All blow guns listed below have 1/4" NPT inlet port. A) PLASTIC BLOW GUN With 12" metal nozzle. 0430014 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

899

1199

RUBBER NOZZLE BLOW GUN • For positive leakproof connection when blowing out any fluid lines, automatic transmissions, etc. • A must where metal tip could mark delicate finish on moulds or fresh paint 99 0432591 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT TIP 0432609 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.99

ENGINE CLEANING & UNDERBODY GUNS F F) WATER/AIR WASHING GUN • Attaches to air compressor and water supply • Adjustable air and water flow • Nickel plated aluminum construction 99 0434795 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

G) ENGINE CLEANER • Kit includes engine and machinery cleaner with 4 ft. suction hose • 3.0 CFM @ 60 PSI 10" WAND 99 0430026 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . 24" WAND 99 0430071 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . H) ENGINE CLEANING GUN • Requires 0.5 to 3.1 CFM @ 40 to 60 PSI • 4 ft. clear siphon hose 99 0430850 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . I) ENGINE CLEANING and UNDERCOATING GUN • Can be assembled to use as either an engine cleaner or an undercoating gun • Air consumption: 11 CFM • Operating pressure: 55 to 70 PSI 99 0432344 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . J) UNDERCOATING GUN • Nozzle: 7/32" I.D. • O’all dim: 9" x 11" x 2" • Flow regulator 99 0432377 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . .

11 14

H I

140

SPRAY PAINTING

PAINT TANKS

PAINTING PAINT SPRAY GUN • Non-bleeder type gun with siphon feed • 1 litre aluminum paint canister • Standard fluid inlet can be attached to a remote paint supply • Nozzle: 1.8 mm • 30 to 70 PSI air pressure • 8.5 to 12.0 CFM air consumption 0450379 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . .

4999

GASKET KIT

0450013 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 3.99

PLASTIC PAINT CAN • 1 litre capacity • Lid included 0452151 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

A) 2 LITRE • Adjustable spray pattern • Operating pressure: 25 to 45 PSI • Nozzle diameter: 1.0 mm and 2.0 mm included 99 • Complete with regulator and 5 ft. paint hose • Avg. air consumption: 2 to 5 CFM for 1.0 mm nozzle, 6 to 8.8 CFM for 2.0 mm nozzle 99 8140600 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . B) 10 LITRE • Operating pressure: 25 to 50 PSI • Lid is held securely with 4 locking wing nuts • Tank will hold a standard 4 litre paint can or can be bulk filled • Complete with regulator, 10 ft. paint hose, air hose, and fittings 99 • O’all dim.: 20-1/2"H x 9-3/4" dia. 99 8006581– Wt. 25.6 lbs. . . . . . . . . . . . . . . .

MINI SPRAY GUN

• 1-1/2" pattern width • 200 ml paint cup • Nozzle: 0.5 mm • Operating pressure: 30 to 50 PSI • Air consumption: 2.5 CFM 8006022 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

119

TOUCH-UP SPRAY GUN • Ideal for touch up spraying, edging, shading, and precision detail spraying • 200 ml cup • 1.8 mm nozzle • 45 to 60 PSI operating pressure range • Avg. air consumption: 7.3 CFM @ 60 PSI • Cont. air consumption: 29.2 CFM @ 60 PSI 8079923 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . .

SPRAY GUN • Can be used with bulk tank • Pattern width: 7" to 9" • Standard nozzle: 2.0 mm • Operating pressure: 22 to 44 PSI • Avg. air consumption: 6.0 to 8.8 CFM @ 22 to 44 PSI 8006583 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . .

3499

ADJUSTABLE AIR VALVE

1999

PAINT SPRAY GUN STAND

• Adjust air pressure at paint spray gun • 1/4" NPS connections • Adjustable from 0 to 160 PSI max. 8108847 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

1499

SPRAY GUN CLEANING KIT • Holds paint spray guns upright for storage and refilling • Universal design fits most gravity feed and touch up air paint spray guns • Metal stand includes adjustable clamp and hex key 8061962 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

• Ideal for cleaning all types of spray guns • Includes a specially formulated lubricant for spray gun needles 99 0450001 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

999

141

SPRAY PAINTING

GRAVITY FEED PAINT GUN INDUSTRIAL QUALITY!

• Cup: 400 ml • Nozzle: 1.5 mm • 30 to 60 PSI working pressure • Avg. air consumption: 12 to 15 CFM • Factory tested and fine tuned before being packaged 0450024 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9999

HVLP PAINT GUNS

C A

D B

High volume, low pressure produces a soft gentle easy to control spray. A) HVLP PAINT SPRAY GUN • Paint can holds 1 litre of liquid • Pattern width: 5.9" to 7" • Nozzle dia. 1.4 mm • Operating pressure: 30 to 50 PSI • Air consumption: 7.1 CFM @ 50 PSI 99 8006578 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . B) 3 PC HVLP SPRAY GUN KIT • 1 litre aluminum gravity feed paint cups • Spray pattern control knob • Includes 2 guns and 1 pressure regulator • 1.4 mm needle and nozzle for lighter material • 1.7 mm needle and nozzle for heavier material • Operating pressure: 30 to 45 PSI • Avg. air consumption: 7.0 to 9.0 CFM @ 30 to 45 PSI 99 8006057 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . .

119

C) HVLP PAINT GUN • Operation pressure: 30 to 43 PSI • Anodized aluminum gun body • Stainless steel needle & 1.4 mm nozzle • 600 cc gravity feed nylon cup • With pressure gauge 99 8160657 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . D) PROFESSIONAL HVLP PAINT GUN • Includes 1.9 litre pressure tank, pressure gauge and two 5 ft. hoses • 1.0 mm stainless steel nozzle suitable for latex paint use • Operating pressure range: 15 to 43 PSI • Avg. air consumption: 3.5 CFM @ 43 PSI • Cont. air consumption: 13.9 CFM @ 43 PSI 99 0450071 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . .

149

TURBINE HVLP SPRAY SYSTEM

142

• HVLP produces a gentle, easy-to-control spray reducing paint waste • System includes: 120V (1,000W) HVLP turbine compressor, HVLP spray gun with 1 quart paint canister, 15 ft. air hose and portable gun stand • Output pressure: 4 PSI 99 0450070 – Wt. 13.1 lbs. . . . . . . . . . . . . . .

149

• Use to spray most liquid dry wall materials from joint cement to ceiling acoustics, wall texture, spatter, semi-fog, or any other sprayable material that will feed through the hopper by gravity • Avg. air consumption: 2.7 CFM @ 50 PSI 3406063 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . .

PLASTIC PAINT STRAINERS • Fits the suction tube on most paint spray cup guns • Package of 8 0450030 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

PAINT MIXER

• 3"W x 16"L • Designed to be used with a variable speed drill 99 8003399 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

AIR BRUSHES

499

A) AIR BRUSH KIT • Includes air brush, air hose plus 2 glass jars size 22 ml and 60 ml • Operating pressure: 15 to 35 PSI 0470526 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . B) METAL AIRBRUSH • Includes fine head airbrush, 6 ft. hose, two 22 ml jars with covers, adapter, wrench, 5 ml metal cup, and metal hanger • Operating pressure: 15 to 50 PSI 8006582 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . C) PROFESSIONAL METAL AIRBRUSH • Aluminum alloy construction • Average air consumption: 30 PSI @ 0.5 CFM • Pencil style design sprays at any angle • Includes: 2 paint cups (2 ml and 10 ml), air connector, and wrench 0450067 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

1299

PAINTING & SANDBLASTING

AIR OPERATED TEXTURING GUN

3499

5999

SANDBLASTING FLOOR MODEL SANDBLASTING CABINET

• Blast rust, corrosion, and paint in an enclosed cabinet to keep dust off the floor and out of the air • Heavy steel construction, heavy duty blast gun, plexiglass viewing window • Avg. air consumption: 5 to 15 CFM @ 80 to 120 PSI 99 8046492 – Wt. 92.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PC REPLACEMENT CERAMIC NOZZLES 8026717 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99 REPLACEMENT GLOVES 8133043 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.99

249

143

SANDBLASTING

BENCH MODEL SANDBLASTING CABINET

• Cleans parts quickly and easily • Through the sealed rubber glove ports, you control the air blast gun inside • For use with glass beads, silica sand, aluminum oxide, and most other abrasives • Window size: 22" x 11" • Air consumption: 5 to 15 CFM @ 80 to 120 PSI • O’all dim.: 25" x 21" x 19" 99 8014659 – Wt. 40.3 lbs. . . . . . . . . . . . . . . 2 PC REPLACEMENT CERAMIC NOZZLES 8026717 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . 9.99

189

SANDBLASTING CABINET ACCESSORIES A A) 12V LIGHT ADAPTER 99 8012795 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . B) SANDBLAST CABINET LIGHT Fits 8046492 and 8014659. 99 8012802 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . C) WINDOW SHIELDS • Easy peel and stick design • Can be cut to fit any size sandblaster cabinet 8 PK of 11" x 17" 99 8055515 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . 8 PK of 12" x 36" 99 8006652 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . .

24 34

5 GALLON SIPHON SANDBLASTER

SPOT-TYPE SANDBLASTER

• Automatic sand recovery allows for dustless blasting • Includes gun, 4 nozzles for different shaped surfaces, and 2 lbs. of sand • Requires min. 6 CFM @ 80 to 120 PSI 99 6320642 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . REPLACEMENT NOZZLE 6320691 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 1.99 REPLACEMENT 46 GRIT ALUMINUM OXIDE SAND 6320019 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . 4.99

144

• Removes paint, scale, rust, or graffiti quickly and easily • Working pressure: 65 to 125 PSI • Can be used with most types of sandblasting abrasives • Avg. air consumption: 5.8 CFM @ 90 PSI • Cont. air consumption: 23 CFM @ 90 PSI 99 8012660 – Wt. 12.7 lbs. . . . . . . . . . . . . . . . REPLACEMENT NOZZLES (3 PACK) 8085839 – Wt. 0.1 lbs. . . . . . . . . . . . . . 7.99/pkg.

SANDBLASTING

100 LB PRESSURE SANDBLASTER • ASME approved and CRN registered • When the shut-off valve on the nozzle is opened, the air/sand mixture comes out under tremendous force • Pressure blasters use 1/3 the sand and considerably less air than a siphon fed sandblaster • Quick-release deadman valve stops immediately if the operator’s grip slips or the unit is dropped • “Lift-up” sand filler valve, air inlet valve, pressure gauge, mixing control, relief valve, fixed reinforced sand/air hose, and 2 ceramic 1/8" nozzles • 8 ft. sand/air hose • Solid rubber wheels 8003897 – Wt. 55.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACCESSORIES FOR 100 LB PRESSURE SANDBLASTER QUICK-RELEASE DEADMAN VALVE 6320005 – Wt. 1.3 lbs. . . . . . . . . . . . . 19.99 STEEL PIVOT SEAL BLOCK 6320011 – Wt. 0.1 lbs. . . . . . . . . . . . . . 1.99 1/2" FORGED BRASS ON/OFF VALVE 8137044 – Wt. 0.5 lbs. . . . . . . . . . . . . . 4.99 HEAVY DUTY CERAMIC NOZZLES Size 3/32" 1/8" 5/32" 3/16" 1/4"

Wt. (lbs.) 0.3 0.3 0.3 0.3 0.3

ITEM 6320246 6320253 6320261 8088932 6320543

PRICE 9.99 9.99 9.99 9.99 9.99

43999

NOZZLE SELECTION CHART Recommended Nozzle Compressor Specs Blasting Area I.D. HP CFM PSI (sq. ft./min.) 3/32" 2 to 3 10 100 3/4 1/8" 3 to 5 20 100 1-1/2 to 2 5/32" 5 to 10 30 100 2 to 2-1/2 3/16" 10 to 15 45 100 3-1/2 to 4 1/4" 20 80 100 4-1/2 to 5

Abrasive usage/hr. 100 lbs. 175 lbs. 225 lbs. 350 lbs. 500 lbs.

2 PK REPLACEMENT NOZZLES • 2 pc steel sandblaster nozzles • 0.205" (5.2mm) I.D. • Fits Powerfist Gravity Feed Sandblaster 8011821 8085813 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

PRESSURE SANDBLASTERS

A C B Pressurized design gives 30% more sandblasting power than siphon units. A) & B) • Includes: deadman style sandblasting gun, 9 ft. hose, filling funnel, shut-off valve, pressure gauge, and 4 ceramic nozzles • Working pressure: 85 to 125 PSI • Air consumption: 6 to 25 CFM • Use with 5 HP or larger air compressor recommended A) 5 GALLON MODEL 99 8089310 – Wt. 30.0 lbs. . . . . . . . . . . . . . . . . B) 10 GALLON MODEL 99 8089302 – Wt. 48.1 lbs. . . . . . . . . . . . . . . . .

119 179

C) 10 GALLON MODEL • Includes: deadman style sandblasting gun, 8 ft. heavy duty hose (3/8" I.D.), and 4 interchangeable nozzles • Working pressure: 65 to 125 PSI 99 8003841 – Wt. 47.7 lbs. . . . . . . . . . . . . . . . . REPLACEMENT DEADMAN VALVE 8084923 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . 14.99 5 PACK REPLACEMENT NOZZLES

249

Wt. 0.1 lbs.

2.4 MM NOZZLE (0.095") – 8086290 2.7 MM NOZZLE (0.110") – 8086274 3.2 MM NOZZLE (0.130") – 8086258 3.6 MM NOZZLE (0.142") – 8086308

4.99/pkg.

145

SANDBLASTING ACCESSORIES

COMFORT GRIP SANDBLASTER

COMFORT GRIP GRAVITY FEED SANDBLASTER

• Comfortable grip with easy squeeze trigger • Gravity feed design holds 260 ml of sandblasting media • Comfortable grip with easy squeeze trigger • Includes 5.2 mm (0.204") steel nozzle • Siphon style sandblaster includes 10 ft. long • 90 PSI max. operating pressure 3/8" I.D. siphon hose and steel pick up tube • Use with 2 HP or larger air compressor • Ceramic nozzle for extended wear recommended • 90 PSI max. operating pressure • Avg. air consumption: 4 CFM @ 90 PSI • Use with 3 HP or larger air compressor • Cont. air consumption: recommended 15 CFM @ 90 PSI • Avg. air consumption: 4.5 CFM @ 90 PSI 99 8059966 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . • Cont. air consumption: 17 CFM @ 90 PSI 99 2 PACK REPLACEMENT NOZZLES 8059974 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . 8121733 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . 3.99/pkg. 2 PACK REPLACEMENT NOZZLES 8085847 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 6.99 SANDBLASTING HOSE

SANDBLASTING GUN

• Use with an air compressor and your own container • Includes gun with ceramic nozzle, steel pickup tube, 10 ft. abrasive hose, air jets, and hex key wrench 99 6320360 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . REPLACEMENT CERAMIC NOZZLE 6320006 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 2.99

• Industrial quality hose • 1/2" I.D. 8039945 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

399/ft.

PROFESSIONAL SANDBLASTING HOOD • Protects your face and eyes • Vinyl construction • Large heavy duty 6" x 9" plexiglass window • Rear mesh vent for operator comfort • 1 size fits all 99 6320444 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . REPLACEMENT LENS 6320451 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 3.99

AIR SUPPLIED PROFESSIONAL SANDBLASTING HOOD

SANDBLASTING GLOVES • Complete protection for face, eyes and upper torso • Internal air dispenser provides fresh air and cool-down effect • Heavy duty vinyl construction with felt lining • Large view replaceable 6" x 9" heavy duty plexiglass window • Adjustable 24" nylon web belt • 36" flexible air supply hose with adjustable regulator 99 8096711 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . .

119

TECH TIP

146

Always remember to use eye protection when using an air hammer or any air tool.

• 11" cuff • Protects hands while sandblasting • Textured surface grip on hands and fingers • Alkali and acid resistant 5050085 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

2 PK CERAMIC NOZZLES For handheld sandblaster 6320038. 6320051 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

3/8" STEEL SHUT-OFF VALVE 6320047 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

ALUMINUM OXIDE (80 GRIT) A sharp, long lasting abrasive. Grains are blocky, containing no flats or slivers. Grains penetrate and cut even the hardest metals and sintered carbide. Fast cutting action minimizes damage to thin materials by eliminating surface stresses caused by heavier, slower cutting media. • Up to 10 times more durable than silica sand • Ideal for sandblasting cabinets 99 8200578 – 55.3 lb. bag . . . . . . . . . . . . . . .

GLASS BEADS (BT7 GRIT) A contaminant free environmentally friendly choice produces clean surfaces. Removes foreign substances from the base surface without dimensional change. Meets OSHA standards for cleaning and are manufactured to conform to US Military Specs. Bright satin finish is a desired effect in parts ranging from medical equipment to stainless steel propellers. 99 8200560 – 55.3 lb. bag . . . . . . . . . . . . . . . DUST NET (35-60 GRIT) A blasting abrasive that has been treated with TC1210 Dustnet. Nuisance dust is reduced up to 97% during handling; in blasting applications it reduces respiratory silica up to 76% and improves visibility by 50%. DustNet is non-hazardous, and does not produce hazardous waste during use or in manufacturing. Ideal when blast cleaning lighter gauge metals such as automotive, farm equipment and anywhere a 2.5 to 3.0 mm profile is required for painting. WEST* 99 8200552 – 52.0 lb. bag . . . . . . . . . . . . . . . . .

EBONY GRIT ABRASIVE (#55) Ebonygrit is produced from a by-product of the manufacturing of copper, which is processed into an abrasive by Opta Minerals. Typically it is composed of ferrosilicate (Fayalite, Fe2SiO4) material and oxides, formed when the molten slag is quenched in cold water. This cooling process fractures the slag into coarse and angular particles, making it an ideal blasting slag with optimal blasting properties. A utility size for all kind of blasting jobs. Suitable for the removal of light rust and paint and mill scale. 99 8200594 – Wt. 55.0 lbs. . . . . . . . . . . . . . . . . . . . . . . CRUSHED GLASS (#50) 20-35 Crushed Glass for Blast Cleaning. Crushed glass is used for a wide variety of blast cleaning operations, such as the blasting of: autobodies and auto parts, trucks, construction equipment, fibreglass and plastics, wood, stainless steel and many other sensitive surfaces. 99 8223794 – Wt. 52.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . * Available only in our Winnipeg, Brandon, Regina, Saskatoon, Lethbridge, Calgary, Red Deer, Edmonton, Grand Prairie, Kelowna, Coquitlam, Prince George, Langley, and Lloydminster stores.

TECH TIPS

SANDBLASTING ABRASIVES & AIR SANDERS

SANDBLASTING ABRASIVES

Having an in-line filter may not be enough for paint guns, sandblasters, and tools that require perfectly dry air. In-line filters are made for eliminating water droplets only; water vapours pass right through. To achieve optimum moisture elimination, you may need to use an air dryer.

AIR SANDERS BELT SANDERS

A) BELT SIZE: 3/8" x 13" • 16,000 RPM • Air consumption: 6.2 CFM @ 90 PSI 3410906 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . B) BELT SIZE: 3/4" x 20-1/2" • 16,000 RPM • 80 and 100 grit sanding belt included • Air consumption: 14.2 CFM @ 90 PSI 3410205 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . .

7999 B

11999

REPLACEMENT SANDING BELTS – 3 PACKS 3/8" x 13" 3/4" x 20-1/2" 36 Grit 8147621 8147662 50 Grit 8147639 8147670 80 Grit 8147647 8147688 120 Grit 8147654 8147696 PRICE

229

249

3" x 21" 8147704 8147712 8147720 8147738

4" x 24" 8147746 8147753 8147761 8147779

279

349

3 PACK

147

AIR SANDERS

SANDERS All sanders feature a 1/4" NPT inlet. A) 6" DUAL ACTION ORBITAL SANDER 99 8064685 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . B) 5" HIGH SPEED SANDER 99 3407269 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT BACKING DISC 3414737 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99 C) JITTERBUG AIR SANDER 99 3407277 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 6" AIR PALM SANDER 99 8145385 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . E) PROFESSIONAL DUAL ACTION SANDER 99 8031621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) STRAIGHT LINE AIR SANDER 99 3408192 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29 32

29 49 64 54

C D

TECH TIPS Why use air tools over power tools? F

A B C D E F

Speed 10,000 RPM 20,000 RPM 8,000 SPM 10,000 9,000 RPM 2,100 SPM

Air tools generally cost less, weigh less, and will not be damaged if stalled or overloaded. With air tools, you also eliminate the risk of shock or fire.

PERFORMANCE CHART Stroke Paper Size Avg. Air Consumption Wt. (lbs.) N/A 6" 4 CFM @ 90 PSI 4.6 N/A 3", 4", 5" 4.5 CFM @ 90 PSI 2.5 3/16" 3-3/4" x 9" 6.0 CFM @ 60 PSI 4.3 N/A 6" 2.8 CFM @ 90 PSI 3.1 N/A 6" 6.0 CFM @ 90 PSI 4.4 1" 2-3/4" x 17-1/2" 7.0 CFM @ 90 PSI 6.0

ITEM PRICE 8064685 29.99 3407269 32.99 3407277 29.99 8145385 49.99 8031621 64.99 3408192 54.99

SANDPAPER 10 PACKS For C: 3-2/3" x 9" 3410983 – 80 grit 3410984 – 150 grit 3410985 – 180 grit 3410986 – 240 grit 3410987 – 320 grit

For A, B, D, E: 6" peel, stick sanding discs.

299/pkg.

699/pkg.

3410967 – 50/60 grit 3410968 – 80 grit 3410536 – 100 grit 3411032 – 180 grit 3410538 – 220 grit 3410539 – 320 grit 3410540 – 400 grit

For F: 2-3/4" x 17-1/2" 3410977 – 40 grit 3410978 – 80 grit 3410979 – 100 grit 3410980 – 150 grit 3410981 – 180 grit

499/pkg.

AIR RATCHETS

148

Dr. Max. Speed G 3/8" 160 RPM H 1/2" 160 RPM I 1/2" 150 RPM

Max. Torque 50 ft.-lbs. 50 ft.-lbs. 50 ft.-lbs.

G) 3/8" DR AIR RATCHET 8096836 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . H) 1/2" AIR RATCHET 8096844 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I) 1/2" QUICK RELEASE AIR RATCHET 8006953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PERFORMANCE CHART Avg. Air Consumption 2.7 CFM @ 90 PSI 4.0 CFM @ 90 PSI 4.0 CFM @ 90 PSI

Wt. (lbs.) 2.8 2.9 2.9

ITEM 8096836 8096844 8006953

3499 3499 4499

PRICE 34.99 34.99 44.99

AIR IMPACT WRENCHES

AIR IMPACT WRENCHES A B

C E

F G

A) 3/8" BUTTERFLY IMPACT WRENCH Built-in regulator with 8 settings. 8192106 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . B) 3/8" IMPACT WRENCH • Torque: 60 lbs. @ 90 PSI, 75 lbs. @ 120 PSI • One hand reversible action, positive action trigger • Built-in power regulator, 3 CFM 8192098 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . C) 1/2" PISTOL GRIP 8062978 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 1/2 AIR IMPACT WRENCH Operating pressure: 90 PSI. 8183485 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . .

2999

34 34 89

E) 3/4" IMPACT WRENCH Heavy duty high torque design. 99 99 8029411 – Wt. 10.8 lbs. . . . . . . . . . . . . . . . . F) 1/2" DR AIR HIGH TORQUE IMPACT WRENCH 99 • Cont. air consumption: 30 CFM @ 90 PSI • Max. pressure: 120 PSI 99 8096851 – Wt. 6.3 lbs. . . . . . . . . . . . . . . . . . . . 99 G) 1" HEAVY DUTY D-HANDLE 99 8146821 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129 99 299

PERFORMANCE CHART

Dr. A B C D E F G

3/8" 3/8" 1/2" 1/2" 3/4" 1/2" 1"

Max. Speed 9,000 RPM 9,000 RPM 7,000 RPM 7,000 RPM 4,500 RPM 8,000 RPM 3,900 RPM

Torque (ft.-lbs.) Working Max. 52 75 60 120 180 230 420 500 700 800 300 420 900 1,600

Avg. Air Consumption (@ 90 PSI) 3 CFM 5.1 CFM 4 CFM 7.5 CFM 7.5 CFM 10.2 CFM 9 CFM

Wt. (lbs.) 2.1 2.8 5.2 5.8 10.8 6.3 39.4

ITEM

PRICE

8192106 8192098 8062978 8183485 8029411 8096851 8146821

29.99 34.99 34.99 89.99 129.99 99.99 299.99

TECH TIP Impact Sockets are designed for use with Air Impact Tools. They are made of a softer but stronger and thicker steel allowing them to withstand the high impact. Hand sockets are not recommended and may even be dangerous to use with an air impact tool. However, Impact Sockets can be used with a hand ratchet.

149

AIR HAMMERS

Operating pressure: 70 to 100 PSI. A) 6 PC KIT 8091001 . . . . . . . . . . . . . . . . . . . . . . . . B) 8 PC KIT 3405420 . . . . . . . . . . . . . . . . . . . . . . . . C) 11 PC KIT 3405271 . . . . . . . . . . . . . . . . . . . . . . . .

AIR HAMMERS

1999 2499 3999

A B C

BPM 4,500 3,000 2,100

Stroke 1-5/8" 2-5/8" 3-1/2"

Consumption @ 90 PSI Wt. (lbs.) 4.0 CFM 3.5 4.0 CFM 4.9 4.5 CFM 6.7

ITEM 8091001 3405420 3405271

PRICE 19.99 24.99 39.99

SPRING RETAINERS – 2 per pkg. 3409810 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 PC AIR HAMMER KIT WITH 4 CHISELS

AIR HAMMER CHISEL SETS

• Blows per minute: 4,500 BPM • Stroke: 1-5/8" • Average air consumption: 2.8 CFM @ 90 PSI • Suggested compressor HP: 2 HP • Built-in air regulator for simple power and speed control • Positive action trigger • Air inlet: 1/4" NPT 99 8146961 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . .

AIR HAMMER ATTACHMENTS

Heavy duty chrome-moly construction. D) 4 PC SHORT SHANK CHISEL SET 8091019 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 6 PC LONG SHANK CHISEL SET 3410277 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . F) 9 PC CHISEL SET 5 long shank and 4 short shank chisels. 3410213 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

599 1299 1899

299

G) PROFESSIONAL QUICK-CHANGE CHISEL CHANGER • Change chisels quickly and easily • High quality chrome finish 3411005 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . H) PANEL CRIMPER • Forms a step in sheet metal allowing patch panel to set flush • Has standard 0.401 shank 3410255 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . I) 9" NEEDLE SCALER Removes rust, scale, welding flux, etc. 3416393 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . .

INDIVIDUAL AIR HAMMER CHISELS

1499 1999

150

2499

K Heavy duty chrome-moly construction. Wt. 0.3 lbs.

Type J Angled weld breaker K Sheet metal trimmer

ITEM 3416534 3416583

PRICE 3.49 3.49

ROOFING NAILERS

B A B) PROFESSIONAL AIR ROOFING NAILER • Ultra-lightweight design - only 4.84 lbs (empty) • Drives standard 11 gauge, 15° wire-collated • Professional quality with durable driver and roofing nails 3/4" to 1-3/4" long O-ring assembly • Fasten a full bundle of shingles without • Durable steel safety foot with carbide inserts reloading (120 nails) • Metal side guards prevent tool from sliding • Adjustable exhaust deflector on inclined surfaces A) COIL ROOFING AIR NAILER • Fastener indicator makes it easy to check if • Strong & lightweight die-cast aluminum body reloading is necessary • Hardened steel contact safety with dual • Well balanced, lightweight design with carbide inserts resist wear comfortable grip for reduced operator fatigue • Steel skid plates with rubber inserts help and ease of manoeuvrability keep nailer from sliding off roof • Operating pressure: 70 to 100 PSI • Min. operating pressure: 70 PSI • Avg. air consumption 2.7 CFM @ 90 PSI • Max. operating pressure: 120 PSI (rated at one shot per second) • Avg. air consumption: • Includes M style coupler plug, air tool oil, 5.5 CFM @ 90 PSI safety goggles, and 3 hex wrenches 99 99 8095903 – Wt. 9.7 lbs. . . . . . . . . . . . . . . . 8094997 – Wt. 8.2 lbs. . . . . . . . . . . . . . . . .

179

AIR FASTENERS

249

FLOORING NAILERS

15° ROOFING COIL NAILS

• 1-1/4" x .120 electro-galvanized • 7,200 nails 99 8117509 – Wt. 33.0 lbs. . . . . .

2" “L” HEAD FLOORING CLEATS

1,000 pc package. 8117582 – Wt. 3.9 lbs. . . . . . . .

1599

FLOORING STAPLES

• Lightweight die-cast aluminum body for less fatigue • Ergonomic design with long handle for ease of operation • Composite base eliminates scratching and damage to wood surface • Mallet (included) actuated single fire operation for operator safety C) FLOORING AIR STAPLER with MALLET • Drives 1-1/2" to 2" staples (crown 12.7 x 1.9 x 1.6 mm) • Balanced for stability • Operating pressure: 70 to 110 PSI • Max. pressure: 120 PSI • Nail cap.: 60 pcs • Air consumption @ 90 PSI: 0.5 CFM per staple 99 8158172 – Wt. 23.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) 2" AIR FLOORING CLEAT NAILER • Drives 1-1/2" to 2" long "L" and "T" shaped flooring cleats • Operating pressure: 60 to 100 PSI • Max. pressure: 120 PSI • Cleat cap.: 110 fasteners • Air consumption @ 90 PSI: 0.5 CFM per nail • 3/8" NPT air inlet 99 8158164 – Wt. 22.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

239

• 1,000 pc package • 15.5 gauge galvanized-2" leg 1-3/4" LEG 8117574 – Wt. 4.2 lbs. . . . . . . . . . 2" LEG 8117558 – Wt. 4.7 lbs. . . . . . . . . .

899 999

199

151

AIR FASTENERS

AIR NAILERS

(A to C) • Nail capacity: 100 pcs. (or 100 staples for 8042509) • Max. pressure: 120 PSI • Comfortable rubber grip • Operating pressure: 60 to 100 PSI

A) 1-1/4" AIR BRAD-NAILER • Drives 18 gauge nails from 3/8" to 1-1/4" • Avg. air consumption: 3.5 CFM 99 8005448 – Wt. 3.9 lbs. . . . . . . . . . . . . . . . . . B) 2" AIR BRAD-NAILER • Drives 18 gauge nails from 5/8" to 2" • Lightweight aluminum die-cast body • Quick release nose piece for fast cleaning of jams • 360° air deflector • Side view window to monitor supply 99 8033177 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . .

C) 2-IN-1 NAILER/STAPLER • Uses 18 gauge brad nails from 5/8" to 2" long • Uses 18 gauge 7/32" crown staples from 5/8" to 1-5/8" long • Avg. air consumption: 4 to 6 CFM • High/low settings for hard and soft materials • Kit includes gun, 2 wrenches and oil 99 8042509 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . D) 28° SINGLE and BUMP FIRE FRAMING NAILER • 10-12 gauge nails up to 3-1/2" long • Operating pressure: 80-110 PSI • Rubber nose piece protects working surface • Large piston for increased power • 360° adjustable air deflector • Tool hook can be installed • Rubber comfort grip • Uses 28° 2" to 3-1/2" x 0.113" to 0.131" clipped-head framing nails • Bump fire option for high production work, single fire option for safety 99 8134926 – Wt. 12.5 lbs. . . . . . . . . . . . . . .

129

5,000 PC BRAD NAIL and STAPLE PACK

28° FRAMING NAILS

• 2-3/8" x 0.113 smooth clip head • For wood framing use • Contains 1,000 pcs of each: 13/16" brad nails, • For use with 8134926 1-14" brad nails, 2" brad nails, 5/8" staples, and 8168221 – Wt. 14.5 lbs. . . . . . . . . . . . . . . . . . . 1-5/8" staples • For use with 2-in-1 nailer/stapler FRAMING NAILS 8042509 99 8047839 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . .

1999

152

5,000 PC 1,000 PC

18 GAUGE BRAD NAILS Size 1" 1-1/4" 1-1/2" 2" 3/4" 1" 1-1/4" 1-1/2" 2"

Wt. (lbs.) 0.6 0.6 0.8 1.0 1.8 2.5 3.1 3.7 4.9

• Generic Bostitch strip nails • 3 1/4" x .120 8077935 – Wt. 21.5 lbs. . . . . . . . . . . . . . . . . . . ITEM 8078131 8078149 8078156 8078164 8078057 8078099 8078107 8078115 8078123

PRICE 2.99 4.99 4.99 5.99 6.99 7.99 9.99 11.99 14.99

2499

SPIRAL COIL NAILS • Universal collation • Great for home owners doing their own installations 2" x 0.09" 8184244 – Wt. 17.1 lbs. . . . . . . . . . . . . . . . . . . 2.5" x 0.09" 8184251 – Wt. 21.0 lbs. . . . . . . . . . . . . . . . . . .

2499 2999

• Magnetic nail guide holds nail in place for faster and easier driving • Drives bulk nails from 5d to 70d • Operating pressure: 72 to 100 PSI • Max pressure: 120 PSI • 1/4" NPT quick coupler air inlet • Includes leather cover • Avg. air consumption: 3 CFM @ 90 PSI 8089260 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . .

AIR RIVETER

• Nose pieces: 3/16", 5/32", 1/8", and 3/32" • Capacity: 3/16" dia. • Air inlet: 1/4" NPT • Avg. air consumption: 4.0 CFM @ 90 PSI 99 3416468 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . 99 REPLACEMENT JAWS 3410154 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 7.99

AIR POWERED CAULKING GUN

• Air consumption: 4.5 CFM @ 90 PSI • Operating pressure: 40 to 90 PSI • All metal barrel and handle 8205742 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . .

1899

AIR SHEARS & NIBBLERS

AIR BODY SAW

AIR FASTENERS, SHEARS & NIBBLERS

AIR PALM NAILER

PISTOL GRIP AIR OPERATED PUNCH/FLANGE TOOL

• Punches holes for riveting and welding • Punch dia.: 5 mm • Punch cap.: 1.6 mm mild steel max. • Crimps up to 14-gauge sheet steel • Operating pressure: 90 PSI 8012768 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . .

• Die cast aluminum body with rubber grip • Trim & shape light plate, sheet metal, and plastics • Comes with 3 coarse tooth and 3 fine tooth blades • Maximum cutting capacity: 17 gauge • No load speed: 10,000 SPM • Air consumption @ 90 PSI: 4.0 CFM 99 • Stroke length: 3/8" 8164691 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . .

AIR BODY SAW

3999

STRAIGHT GRIP AIR OPERATED PUNCH/FLANGE TOOL

• Cuts sheet metal up to 1/16" thick, cuts plywood and plastic up to 1/2" thick • Includes 2 blades • Avg. air consumption: 2.2 CFM @ 90 PSI • Cont. air consumption: 8.8 CFM @ 90 PSI 99 8045849 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . REPLACEMENT BLADES – PKG of 5 3410060 – Wt. 0.1 lbs. . . . . . . . . . . . . . . 7.99/pkg.

• Punches holes for riveting and welding applications • Punch dia.: 5 mm • Punch capacity: 1.6 mm • Crimps up to 14-gauge sheet steel • Avg. air consumption: 4.0 CFM @ 90 PSI 3410012 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . .

7499

153

AIR SHEARS & DRILLS

AIR SHEARS B

D • 1/4" NPT • Avg. air consumption: 4.0 CFM @ 90 PSI Max. Speed Wt. ITEM PRICE (lbs.) 17A 2,600 RPM 2.4 8015872 67.99 GAUGE B 2,600 RPM 3.1 8015845 67.99 18C 2,700 RPM 2.8 3407137 34.99 GAUGE D 2,500 RPM 2.4 3408226 44.99

E REPLACEMENT AIR SHEAR BLADES Blade Kit Centre Blade (Centre and side) (Only) For ITEM PRICE ITEM PRICE A and B 8025816 19.99 – – C and D 3410974 9.99 3400023 5.99/ea.

AIR DRILLS F) 3/8" AIR DRILL 99 8146888 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) 3/8" DR REVERSIBLE AIR DRILL 99 8096869 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G H) 3/8" REVERSIBLE AIR DRILL Keyless chuck. 99 8020964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I) 3/8" HEAVY DUTY REVERSIBLE AIR DRILL 99 8151201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J) 3/8" ANGLE AIR DRILL 99 I 8146896 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K) 3/8" HEAVY DUTY ANGLE AIR DRILL 99 3410014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L) 1/2" REVERSIBLE AIR DRILL Keyless chuck, adjustable side handle. 99 8146839 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All air drills feature a 1/4" NPT inlet. Max. Avg. Air Wt. Chuck RPM Consumption (lbs.) ITEM PRICE F 1,800 4.0 CFM @ 90 PSI 2.8 8146888 29.99 G 1,800 6.0 CFM @ 90 PSI 2.9 8096869 44.99 3/8" H 1,800 4.0 CFM @ 90 PSI 2.5 8020964 59.99 I 1,800 4.0 CFM @ 90 PSI 2.7 8151201 69.99 J 1,900 4.0 CFM @ 90 PSI 2.8 8146896 69.99 K 1,800 4.0 CFM @ 90 PSI 2.4 3410014 79.99 1/2" L 550 4.0 CFM @ 90 PSI 3.9 8146839 69.99

29 44

69 69 79

3" AIR CUT-OFF SAW

154

• Free speed: 20,000 RPM • Air inlet: 1/4" NPT • Wheel sold separately • Avg. air consumption: 4.0 CFM @ 90 PSI 8037301 – Wt. 2.5 lbs. . . . .

AIR TOOL OIL • Engineered for all air tools M • Prevents rust formation • Synthetic blend specially formulated for air tools subject to extreme temperatures ranging from -55°C to 250°C (-67°F to 482°F) • Seal conditioner N • Prevents gum and sludge build up OIL CANNOT BE SHIPPED M) 4 OZ. 99 8005089 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N) 500 ML. 99 99 8015266 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 4

A B

D C A) 1/4" COMPACT DIE GRINDER 99 3416500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 1/4" AIR DIE GRINDER 99 8062960 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 1/4" PROFESSIONAL DIE GRINDER Variable speed. 99 3400217 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT inlet, 1/4" collet. Free Speed Avg. Air Consumption 24,000 RPM 3.0 CFM @ 90 PSI A 22,000 PRM 4.0 CFM @ 90 PSI B 21,000 RPM 3.0 CFM @ 90 PSI C 20,000 RPM 2.2 CFM @ 90 PSI D 18,000 RPM 4.0 CFM @ 90 PSI E 18,000 RPM 3.0 CFM @ 90 PSI F

13 19 29

15 PC 1/4" AIR DIE GRINDER KIT

D) 1/4" ANGLE DIE GRINDER 8146904 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) 110° DIE GRINDER 8004937 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) 1/4" HEAVY DUTY ANGLE DIE GRINDER Japanese bearings. 3410017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999 3999 4999

Wt. (lbs.) 0.9 1.8 1.3 1.4 1.5 1.4

ITEM 3416500 8062960 3400217 8146904 8004937 3410017

PRICE 13.99 19.99 29.99 29.99 39.99 49.99

AIR DIE GRINDERS & GRINDERS

AIR DIE GRINDERS

AIR DIE GRINDER & CUT OFF TOOL

• Kit contains: Includes: air operated die grinder, 1/4" air die grinder, 3" air 1/4" and 1/8" collet chuck, 10 grinding cutoff tool, 2 cutting wheels, 10 mounting stones, 2 wrenches, male coupler plug end stones, 1 safety guard, 2 open end wrenches, • Speed: 22,000 RPM allen key, cutting wheel shank, nipple collet • Avg. air consumption: 5 CFM @ 90 PSI 99 and a mounted stone holder. 99 8117541 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . 8117533 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . .

AIR ANGLE GRINDERS

H G) 4" HIGH SPEED GRINDER • Speed: 16,000 RPM • Avg. air consumption: 4 CFM @ 90 PSI 3407111 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . H) 4" AIR ANGLE GRINDER • No load speed : 10,000 RPM • Recommended hose size: 3/8" I.D. • Avg air consumption: 5CFM @ 90 PSI • 5/8" arbor • Built-in regulator to control speed 8146946 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . I) 4-1/2" ANGLE GRINDER • Free speed: 11,000 RPM • Avg. air consumption: 6 CFM @ 90 PSI 8156135 – Wt. 4.6 lbs. . . . . . . . . . . . . . . .

3499 I

4999 99

J) 5" HIGH SPEED GRINDER • Speed: 11,000 RPM • Avg. air consumption: 6 CFM @ 90 PSI 99 3400160 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . .

9999

155

POWER TOOLS

3/8" ELECTRIC DRILL

POWER TOOLS ANGLE GRINDERS

A • 3.3A, 120 V • 0-2,500 RPM • Variable speed, 3/8" keyed chuck 8047525 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . B

A) 4" MINI ANGLE GRINDER • 4.2 A • Arbor: 5/8" • No load speed: 11,000 RPM • Spindle thread: M10 x 1.25 • Spindle lock for easy wheel changes 8007854 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . .

2499

1/2" D-HANDLE DRILL C

2299

B) 5" HEAVY DUTY ANGLE GRINDER •8A • No load speed: 11,000 RPM • 5/8" x 11 NC spindle thread • 7/8" arbor • Spindle lock for easy wheel changes 99 8069643 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . C) ADJUSTABLE ANGLE GRINDER WRENCH Fits all angle grinder center nuts. 99 3410859 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

• 7A, 550 RPM, reversible • Side handle can mount right, left, or top • Durable metal gear housing improves heat dissipation 8039521 – Wt. 8.5 lbs. . . . . . . . . . . . . . . . . .

7499

1/2" ELECTRIC IMPACT WRENCH

7 AMP PLUNGE ROUTER • Variable speed: 11,500 to 34,000 RPM (no load speed) • Max. plunge depth: 1-1/2" • Includes 5/16" & 1/4" collets, wrench, dust collector, straight guide, template guide 99 8120073 – Wt. 8.5 lbs. . . . . . . . . . . . . . . . . .

• Reversible 7.5A motor • Rocker switch for easy one hand operation • 185 ft-lbs max. torque • 2,100 RPM no load speed 8130288 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . .

7999

1/2" RIGHT ANGLE DRILL

3" x 21" ELECTRIC BELT SANDER

156

• 120 volt, 7.5 amp motor • Sands 1,240 ft/min (6.3 m/sec) • Trigger switch with lock-on button • Quick release belt mechanism and belt centering knob • Includes dust collection bag and one 80 grit belt 8155558 – Wt. 8.7 lbs. . . . . . . . . . . . . . . . . .

• Drilling capacity: 7" • 2 speeds–340 and 1,375 RPM • Precision ground heat treated gears • Heavy duty die-cast aluminum head • Includes side handle and spare brushes 99 8171084 – Wt. 15.0 lbs. . . . . . . . . . . . . . .

19999

POWER TOOLS

HEAVY DUTY ANGLE GRINDERS A A) HEAVY DUTY 4-1/2" ANGLE GRINDER • 7.0 A AC/DC, 11,000 RPM motor designed for faster material removal and higher overload protection • Quick-change™ wheel release provides easier and quicker wheel removal with out the need for a wrench • 5/8"-11 spindle thread accepts a wide range of 4-1/2" accessories • Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces • Oversized, protected spindle lock button provides easier and quicker wheel changes • 2 position removable side handle provides increased comfort and control • Slim, ergonomic body design provides increased comfort in extended use applications 99 8121725 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . .

B) 5" ANGLE GRINDER • No load speed 10,000 RPM • 12.0 A AC/DC • Keyless adjustable guard • Rear handle design for greater comfort and control • Sealed ball and roller bearings for extended motor life • Includes grinding wheel, keyless adjustable guard, and 2 position side handle 99 8099350 – Wt. 9.1 lbs. . . . . . . . . . . . . . . .

119

HEAVY DUTY 1/2" VSR DRILL

HEAVY DUTY 3/8" DRILL

• 3/8" keyless chuck • 7.0 A • No load speed: 0 to 2,500 RPM • Single gear reduction • Rubber handle for better grip 8200529 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . .

• 1/2" keyed chuck with key holder • 7.8 A • No load speed 0 to 850 RPM • Max watts out 600 W • Double gear reduction • Anti-lock control shuts down the tool in lock-up situations • 360° side handle for greater control and versatility 99 8155301 – Wt. 5.8 lbs. . . . . . . . . . . . . . . .

16999

43 PC ROTARY TOOL with FLEX SHAFT

14 GAUGE METAL CUTTING SHEAR

• Variable speed dial control • 8,000 to 30,000 RPM • 120 volt, 1 A motor • Includes 41" flexible shaft, stand, and 40 pc accessory kit • Ideal for carving, grinding, engraving, and polishing 8045901 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . .

• Ideal for precision metal cutting; cuts radius as small as 1-1/2" • Cuts metal, aluminum, and plastic up to 14 gauge thick • 3.0 A, 1,800 RPM motor 8083115 – Wt. 5.9 lbs. . . . . . . . . . . . . . . . . .

2999

6999

REPLACEMENT BLADES 8106064 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . 4.99

157

POWER TOOLS

10" RANDOM ORBITAL BUFFER/POLISHER

HEAT GUN with NOZZLES

• Ball bearing construction • Includes applicator pad and buffer pad • D handle provides maximum control • Permanent magnet motor helps maintain speed under pressure 99 8005931 – Wt. 6.1 lbs.. . . . . . . . . . . . . . . . . . . 3 PC REPLACEMENT POLISHING BONNET KIT Includes: terry applicator pad, terry polishing pad, and wool buffing pad. 8084907 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . 4.99

• Dual heat gun with high and low settings and 4 piece nozzle kit • Watts: 700 low/1500 high • Temperature: 375°C (700°F) low/495°C (920°F) high • Used for stripping paint and removing adhesives, heat shrink tubing, pre-heating, drying, etc. 8067928 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . .

7" ELECTRIC SANDER/POLISHER

7" SANDING DISCS WITH VELCRO

2499

• Fits 8016700 7" sander/polisher • 5 per package Wt. 0.2 lbs.

8090771 – 60 grit 8090813 – 80 grit 8090821 – 100 grit 8090839 – 120 grit 8090854 – 180 grit . . . . . . . . . . . . . . . . . . • 11 A • Variable speed: 1,000 to 3,000 RPM • 3-position handle to suit operator's preference • Spring loaded spindle lock • Dial speed control • Overload protection 99 8016700 – Wt. 9.8 lbs.. . . . . . . . . . . . . . . . . . .

REPLACEMENT BACKER PAD 8208639– Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . .

7" BONNETS

• Fits 8016700 7" sander/polisher • 2 per package TERRY CLOTH 8090896 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . 99 WOOL 8090888 – Wt. 0.2 lbs. . . . . . . . . . . . . . . .

299/pkg.

299/pkg. 799/pkg.

18V 3/8" CORDLESS DRILL with LCD DISPLAY

CORDLESS POWER TOOLS 18V CORDLESS DRILL

• LCD screen displays current battery charge level (0 to 100%) • 3/8" keyless chuck • Variable speed (0 to 900 RPM) reversible • 20 + 1 clutch settings • Built-in bubble level • 3/8 keyless chuck, • Includes: 1 hour fast charger, two 18V reversible, variable speed 1,300 mAH Ni-CD rechargeable batteries, • 550 RPM max. 6 HSS drill bits, 6 screwdriver bits and • Includes one 18V 1,200 mAH battery carrying case 99 99 8130114 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . 8088395 – Wt. 10.3 lbs. . . . . . . . . . . . . . . . . REPLACEMENT BATTERY REPLACEMENT BATTERY 8134082 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . 19.99 8088551 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . 19.99

158

HEAVY DUTY 14" CHOP SAW

• 15.0 A, 3,500 RPM • Heavy duty steel base • Pivoting quick release vice • Abrasive wheel and wrench • 1" arbor • Max. cap. (round): 4" • Max. cap. (rectangular): 2-1/2" x 7-1/4" • Max. cap. (square): 4" x 4" 8085052 – Wt. 38.2 lbs. . . . . . . . . . . . . . . . .

POWER TOOLS

14" CUT OFF SAW

• 15.0 A, 3,800 RPM • Spindle lock • Quick lock vise • Includes 14" abrasive wheel and wrench • Max. cap. (round): 5" • Max. cap. (rectangular): 4-1/2" x 6-1/2" 99 8099293 – Wt. 47.1 lbs. . . . . . . . . . . . . . . .

31999

129

REPLACEMENT SAW WHEELS A) 14" METAL CHOP SAW WHEEL • Suitable for general purpose metal cutting • 14" dia. x 3/32" thick with 1" dia. arbor • Type 1, A30P aluminum oxide grit • Reinforced A • 3,900 RPM max. B 99 8086563 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . C) 14" METAL CUTTING BLADE B) DRY CUT DIAMOND WHEELS • 80 teeth, 1" arbor • 1" bore • Carbide tips • Segmented • C5 steel blade, 65 Mn steel body • For cutting concrete, marble, granite, etc. • 2.8 mm kerf size 12" DIAMOND WHEEL • 4,500 RPM max. 5,000 RPM max. 99 • For cutting copper, iron, and steel bar 8141731 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . • Max. copper cutting capacity: 5/64" 14" DIAMOND WHEEL • Max. iron cutting cap.: 1/8" 4,300 RPM max. 99 • Max. round steel cutting cap.: 5/32" 8141749 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . 8141756 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . .

44 54

5999

14" CUT-OFF SAW

14" DRY CUTTING METAL SAW

• 15 A motor • Fold down cutting head with locking chain and carrying handle for safe easy transport • Cuts • Heavy duty steel base aluminum, with foot pads for stable mild steel operation and and stainless less vibration steel 4x faster • Full grip handle than an abrasive design for positive cutter with operating control considerably • Built-in arbor lock for less sparking easy single wrench abrasive wheel changes • Razor sharp cuts • Cutting capacity: 4-1/4" round, require no milling or deburring 2-1/2" x 9-1/2" rectangular, • Includes tungsten carbide tipped dry cut steel and 4-1/4" x 4-1/4" square blade and wrench • 3,500 RPM • 15A high torque motor @ 1,300 RPM • 1" arbor • Metal chip collector 99 8018533 – Wt. 45.9 lbs. . . . . . . . . . . . . . . . 8133886 – Wt. 61.9 lbs. . . . . . . . . . . . . . . . .

17499

449

REPLACEMENT 14" METAL DRY CUT SAW BLADE • 72 teeth • Dry-Cut technology for cool, fast, clean metal cutting • Razor sharp cuts with no milling or deburring needed • Cuts up to 4x faster than an abrasive blade with considerably less sparking 8135337 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . .

7" METAL CUT-OFF WHEEL • 7/8 inch arbor • Replacement wheel for 7" portable chop saw 8019538; replaces 8035431 chop saw wheel from Task 99 99 8116790 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

149

159

POWER TOOLS

DUST COLLECTOR

• Powerful 1 HP induction motor for longlasting smooth performance with protection from damaging dust • Standard 1-micron filtration bags for optimal air cleaning • 6 mil plastic chip collection bags for optimal durability • Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way • Snap in bag rings mean no more fussing with cam-over-lock clamps • 1 HP (750 W) 120 V / 50 to 60 Hz motor • 9" (230 mm) fan dia. • 4" (100 mm) inlet dia. • 600 CFM air speed • 25"H x14-1/2" dia., 12 gal bag 99 8120446 – Wt. 64.2 lbs. . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT BAG 8155152 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.99

199

DIAMOND SAWS A) 4-1/2" HAND HELD DIAMOND SAW • 10 A motor delivers 11,800 RPM • Adjustable base for precise depth or angle cutting • Bevel cuts from 0 to 45° • Includes: 4-1/2" diamond blade with 5/8" arbor and 2 wrenches • Use to cut concrete, granite, tile, marble, brick, asphalt, and other non-metal materials • Includes water attachment for wet cutting 99 3400249 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT DIAMOND CUTTING WHEELS see page 175

B) 7" BENCH MOUNT DIAMOND SAW • 3.75 A, 60 Hz, 3,600 RPM • Built-in reservoir for wet cutting • Suitable for cutting granite, tile, marble, brick, concrete, and other non-metal material • Tilting table 0° to 45° • Stainless steel table 99 8000365 – Wt. 29.6 lbs. . . . . . . . . . . . . . . . . . . . .

10" WET TILE SAW with STAND • 2.5 HP, 15 A, 3,450 RPM motor • No load speed: 2,700 RPM • 10" continuous rim, thin cut kerf, wet diamond blade for tile cutting • Includes submersible water pump with filter, stand with wheels, and water reservoir with drain • 45° miter block and 90° rip guide Cutting capacities: • 24" max. rip cutting length • 16" max. diagonal cutting length • 3" max. cutting depth 99 8130239 – Wt. 110.0 lbs. . . . . . . . . . . . . . . . REPLACEMENT 10" CUTTING WHEEL 8053373 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . 19.99 REPLACEMENT PUMP 8116808 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . 19.99

359

160

• Height: 32" • Top plate dimensions: 7-7/8" x 8-3/4" • Bottom dimensions: 12-1/2" x 12-1/2" • Construction material: Mild Steel • Slot size 65 mm x 15 mm x 6 mm 8150336 – Wt. 18.4 lbs. . . . . . . . . . . . . . . . . . . . 6" BENCH GRINDER • 110V capacitor run induction motor • 1/2 HP • 1.2 no load amps • 3,560 RPM • 3/4" wide wheels • 1/2" arbor 8109654 – Wt. 21.6 lbs. . . . . . . . . . . . . . . . . . . . 8" BENCH GRINDER • 110V capacitor run induction motor • 1/2 HP • 2.7 no load amps • 3,400 RPM • 5/8" wide wheels • 3/4" arbor 8109662 – Wt. 28.6 lbs. . . . . . . . . . . . . . . . . . .

4999

BENCH GRINDER STAND

4999

• Cast iron construction • Top plate measures: 9-1/2" x 9-1/2" • O’all height: 33" 99 3410785 – Wt. 21.4 lbs. . . . . . . . . . . . . . . . . . .

DIAMOND GRINDING WHEEL DRESSER

GRINDING WHEEL DRESSER

6" cast iron handle. 3410745 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . .

2999

499

36 grit. 8049017 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

BENCH GRINDERS & ACCESSORIES

BENCH GRINDER STAND

BENCH GRINDERS & ACCESSORIES

899

GRINDING & WIRE WHEELS WIRE WHEELS A For use on bench grinders. Type Size Arbor Max. RPM Wt. (lbs.) Coarse 6" 1/2" & 5/8" 3,750 0.6 A Fine 6" 1/2" & 5/8" 3,750 0.6 Heavy duty 6" * 6,000 0.8 B Heavy duty 8" * 4,500 1.1 7/8" 9,000 1.1 C Knot-type 6"

ITEM PRICE 3410500 6.99 3410501 6.99 3410505 9.99 3410506 12.99 3410645 13.99

* Heavy duty wire wheels have a 1-1/4" bore and include adapter bushings for 1/2", 5/8", 3/4", 7/8" and 1" arbors.

INDUSTRIAL WIRE WHEELS For bench grinders. Dia. 4" 6"

Arbor 1/2 - 5/8" 1/2 - 5/8"

Wt. (lbs.) 0.3 0.6

ITEM 3410882 3410621

PRICE 8.99 15.99

INDUSTRIAL WIRE WHEELS • For use on bench grinders • 5/8" arbor 6" DIA 8100208 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8" DIA 8100232 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499 3499

161

Al – Aluminum oxide abrasive for use on steel including HSS cutting tools Si – Silicone Carbide abrasive for harder material such as carbide tipped cutting tools • Fast cut rate • 1" bore with bushings for 7/8", 3/4", 5/8", or 1/2" arbor

GRINDER WHEELS & DRILL ACCESSORIES

BENCH GRINDER WHEELS Size 6" x 3/4" 6" x 3/4" 6" x 1" 6" x 1" 8 x 1" 8 x 1" 6" x 1" 8" x 1"

Grit Max RPM Wt. (lbs.) 36 4,450 2.0 80 4,450 1.9 36 4,450 2.5 80 4,450 2.4 36 3,660 4.5 80 3,660 4.3 80 4,450 2.1 80 3,660 3.7

ITEM 8037186 8037194 8037202 8037210 8037269 8037277 8037228 8037285

PRICE 8.99 8.99 9.99 9.99 14.99 14.99 19.99 24.99

4 PC POWER NUT DRIVER SET

DRILL ACCESSORIES DRILL CHUCKS

Sizes: 1/4", 5/16", 3/8", and 7/16". 3410778 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

A) 3/8" KEYED CHUCK 3/8" x 24 UNF (female) chuck and key. 8144701 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . A) 1/2" KEYED CHUCK 1/2" x 20 UNF (female) chuck and key. 8144727 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . B) 3/8" KEYLESS CHUCK 3/8" x 24 UNF (female). 8144370 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . C) 3/8" to 1/2" KEYLESS CHUCK 3/8" x 24 UNF. 8144396 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

799

7PC NUT DRIVER SET 99

1499 1199

Sizes: 11/32", 7/16", 1/4", 5/16", 3/8", 1/2", and 9/32". 8175127 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

1399

1199 7 PC POWER NUT DRIVER SET

4-WAY DRILL MASTER KEYS

D E

• 1/4" shank • Sizes: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8", and 7/16" • Made from S2 industrial steel • Fully heat treated for long life 99 8023676 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

D) 1/4" to 1/2" 8016737 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 1/2" to 3/4" 8016728 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

599 BIT EXTENSION SET 1199

FLEXIBLE DRILL SHAFTS

162

• 6" and 12" long • Features dual setscrews for secure bit attachment • O’all dim.: 14"L x 2"W x 7"H 3410836 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . G

• Ideal for drilling and buffing in hard to reach areas • 1/4" shank, 1/4" chuck F) 41" SHAFT 3414869 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . G) 44" SHAFT with KEYLESS CHUCK 8158388 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . .

699

3 PC POWER EXTENSION BARS

1499 1699

• Turns power drills into power nut drivers • 1/4", 3/8" and 1/2" sq. drive • 1/4" hex shank 3410174 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

DRILL BIT SHARPENING JIG

• Drill mount • 100 grit grinding stone quickly and easily sharpens drill bits from 5/64" to 1/2" (2.0 mm to 12.5 mm) • Requires a power drill operating between 2,000 and 3,500 RPM 8089591 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Sharpens steel and masonry drill-bits from 2 mm to 12.5 mm (3/32" to 1/2") • 80 to 130 cutting angles to suit all drilling applications • White stone for steel drill bits, green stone for carbide masonry drill bits • Stone dressing stick • Complete with base plate • Powered by your electric drill 8157505 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . .

DRILL BITS

DRILL BIT SHARPENER

799

REPLACEMENT STONE FOR DRILL BIT SHARPENER 8157505

3999

8199481– Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

399

DRILL BITS HIGH SPEED STEEL DRILL BIT SETS A) 6 PC HSS DRILL BIT SETS Contains 6 of the same size bit. Wt. 0.1 lbs.

Size 1/16" 5/64" 3/32" 7/64" 1/8"

ITEM 3410661 3410662 3410663 3410664 3410665

PRICE /pkg. 1.69 1.69 1.69 1.99 2.29

B) 8 PC MINI DRILL BIT SET Contains 2 of each:1/16", 3/32", 5/32", and 1/8". 99 3410810 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . /pkg. C) 13 PIECE SET • Sizes: 1/16" to 1/4" in 1/64" increments • Plastic index case 99 3416633 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

D) 21 PIECE SET • Sizes: 1/16" to 3/8" in 1/64" increments • Metal index case 3416682 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . E) 60 PC SET • Sizes 1 to 60 • Metal index case 3400039 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . F) 29 PIECE SET • Sizes: 1/16" to 1/2" in 1/64" increments • Metal index case 3403979 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

1699 E

1899

13 PC TITANIUM DRILL BIT SET

2-1/4" long. Wt. 0.1 lbs.

ITEM 3410678 3410720

2499

12 PC 1/8" DOUBLE ENDED DRILL BIT SET

Type High speed steel Titanium

PRICE 4.99 7.99

• High speed steel coated with titanium for greater heat dissipation making for a faster smoother cut • Sizes: 1/16" to 1/4" 3411068 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

163

DRILL BITS

12" HIGH SPEED STEEL BITS

INDUSTRIAL HSS DRILL BITS

Wt. 0.1 lbs.

Size 1/8" 3/16" 7/32" 1/4" 5/16" 3/8"

ITEM 8096513 8096539 8096547 8096554 8096562 8096570

PRICE (ea.) 2.99 3.79 3.99 4.99 7.99 9.99

10 PC 12" BIT SET • High speed steel • Sizes: 1/8", 9/64", 5/32", 11/64", 3/16", 7/32", 15/64", 1/4", 5/16", and 3/8" 8096588 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . .

2999/set

COBALT COATED DRILL BIT SETS

Size 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 1/4" 5/16" 3/8" 1/2"

ITEM 3404845 3404852 3404860 3404878 3404886 3404894 3400003 3400004 3404928 3404936 3404944 3404969 3405008 3405040 3400095

PRICE 1.79* 1.79* 1.79* 1.99* 1.99* 1.39 1.39 1.49 1.59 1.79 1.99 2.49 2.89 3.99 7.99

*2 bits per package – order by package

115 PC DRILL BIT SETS

• 135° split point tips for precision drilling • Cobalt coated for hard steel, stainless steel, and abrasive materials • Open face metal case A) 21 PC COBALT DRILL BIT SET Sizes: 1/16" to 3/8". 8014178 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . B) 29 PC COBALT DRILL BIT SET Sizes: 1/16" to 1/2". 8014203 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

29 49

QUICK CHANGE DRILL BIT SETS

• Set includes: 29 drills 1/16" to 1/2" in 1/64" increments, 60 number bits, 26 letter bits • Decimal equivalents and tap sizes are marked on index box • Metal index box measures: 13-1/4" x 4-1/2" x 2-1/4" 99 HIGH SPEED STEEL SET 99 3409364 – Wt. 7.3 lbs. . . . . . . . . . . . . . . . . . . . TITANIUM HIGH SPEED STEEL SET 99 99 3400073 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . COBALT SET 99 8001905 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . .

29 PC TITANIUM DRILL BIT SET

D • Quick change with through pins • Fully ground titanium • 135° split point for precision drilling C) 7 PC SET Sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", and 1/4". 99 8002108 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . D) 13 PC SET Sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", and 1/4". 99 8002114 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

164

49 54 89

• High speed steel coated with titanium for greater heat dissipation making for a faster smoother cut • Sizes: 1/16" to 3/8" in 1/64" increments • 2 each of all bits 5/32" and smaller • Metal index case 3416690 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

2499

102 PC DRILL BIT SET • HSS construction • 10 each of : 3/64", 1/16", 5/64", 3/32" and 7/64" bits • 5 each of 1/8", 9/64", 5/32", 11/64" and 3/16" bits • 3 each of 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 5/16", 11/32" and 3/8" bits 99 8196750 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . .

• Made of heavy gauge carbon steel • 1/16" to 1/2" in 1/64" increments 3410362 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

INDIVIDUAL COBALT DRILL BITS

Size 1/16" 1/8" 3/16" 1/4" 5/16" 3/8"

O’all Length 1-7/8" 3-1/8" 3-5/8" 4-1/4" 5-9/16" 5-3/16"

Flute Length 7/8" 1-7/8" 2-1/8" 2-3/4" 3" 3-1/2"

ITEM

PRICE

3413945 3413986 3414026 3414034 3414042 3414059

2.49 2.99 4.39 5.99 9.99 12.99

B A) DRILL BIT HOLDER • Holds 29 bits sizes 1/16" to 1/2" • O’all dim.: 6-1/2"L x 2-1/8"W x 1-1/8"H 3411543 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . B) 29 PC METAL INDEXED DRILL BIT CASE • Holds bit sizes 1/16" to 1/2" • O’all dim.: 7-1/2" x 4-1/2" x 2" 8037812 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

20 PC PRECISION DRILL BIT SET • Set of very small drill bits • Sizes #61 to 80 (0.0135" to 0.039") • Metal index box 3410147 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

STEP DRILLS

399

DRILL BITS & ACCESSORIES

DRILL BIT STORAGE

DRILL GAUGE

999

3 PC TITANIUM STEP DRILL SET

• Self starting tip • Cuts up to 1/8" material • Includes sizes: Bit Wt. 1/8" to 1/2", Sizes Shank ITEM PRICE Steps (lbs.) 1/4" to 3/4", C 13 1/8" to 1/2" 1/4" 0.1 8035672 14.99 3/16" to 7/8" D 12 3/16" to 7/8" 3/8" 0.2 8035681 29.99 • Self starting tip • Cuts up to 1/8" material 8056550 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . .

COUNTER SINK BITS

3999

5 PC METAL HIGH SPEED STEEL COUNTERSINK BIT SET

• For metal surfaces • 1/4" shank Wt. 0.1 lbs.

Size 3/8" 1/2" 5/8" 3/4"

ITEM 8031015 8031006 8030980 8030962

PRICE 4.99 5.99 6.99 7.99

7 PC STOP COLLAR SET

• Kit includes following sizes: 5/16" 3/8", 1/2", 5/8", 3/4" • For use on metal, wood, or plastic 8000044 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

1999

MASONRY DRILL BIT SETS F

Contains: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", E 1/2", and 2 hex keys. 99 • For percussion and rotary drilling 3400033 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . • Carbide tipped and chrome plated G) 5 PC TILE CUTTING BIT 3/16", 1/4", 5/16", 3/8", and 1/2". 3410355 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . H) 8 PC 1/8", 5/32", 7/32", 1/4", 19/64", 21/64", 1/8" shank. 99 3/8", and 27/64" 8005971 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . 8091233 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

399 499

165

DRILL BITS & HOLE SAWS

SPOT WELD CUTTER

AUGER BIT SETS

• Quickly drill out spot welds on fenders, doors, etc. • Retractable pilot assures accurate cut • Double-edged blade for extra long life 3410034 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

7 PC Contains: 1/4", 5/16", 7/16", 3/8", 1/2", 5/8" & one joint. 99 8209629 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

1199

6 PC Contains: 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" bits. 8209645 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . .

1499

6 PC SPADE BIT SET • Creates crisp, clean holes in wood • 1/4" hex shank • Includes: 3/8", 1/2", 5/8", 3/4", 7/8" and 1" 8097131 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 15 PC

1/4" ROUTER BIT SET

13 PC WOOD SPADE BIT SET • Includes: 13 bits from 1/4" to 1" • For drilling large diameter holes 8097115 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

6 PC TITANIUM DRILL SAW SET • Sizes: 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" • Drills, saws, reams and cuts • For use on wood, metal, or plastic 8042520 – Wt. 0.4 lbs . . . . . . . . . . . . . . . . . . . . . . . .

• Heavy duty C2 tungsten carbide cutting tip (ISO K30) • 1/4" shank size Includes: 99 • Straight bits: 1/8", 1/4", 1/2", 3/4" • Flush trim bit: 1/2" • Cove box bit: R1/8" • Dovetail bit: 1/2" • "V" grooving bit 90°: 3/8" • Panel pilot bit: 1/4" • Roman ogee bit: R1/8" • Cove bit: R1/2" • Rounding over bit: R3/8" • 45° chamfer bit: 1-3/16" • Mortising bit: 1/2", 1-1/4" 99 8126518 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . .

1699

MULTI-PURPOSE CUTTING KIT

HOLE SAWS & ACCESSORIES

Includes: cutting guide, 2 drywall cutting bits, and multi-purpose cutting bit. 8145948 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

3" HOLE SAW • Bi-metal • 7/16" hex shank • Cuts steel, iron, brass, wood, aluminum, and plastic • 1,500 RPM 8033594 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . 1/4" PILOT DRILL for 8033594 3410741 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

1499 DOOR INSTALLATION KITS 499

12" DRILL EXTENSION B • 7/16" hex shank • Fits 8033594 8018833 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

ADJUSTABLE HOLE CUTTER

166

• Cuts plywood, laminated composite boards, drywall, plastics, and rubber • Cut holes 1-1/8" x 4-5/8" dia. • Max. thickness: 1" 2929198 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

Suitable for wood or metal doors. A) DOOR INSTALLATION KIT Includes one 1" and one 2-1/8" bi-metal hole saw, 3/8" mandrel, and adapter. 99 8005857 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . B) DOOR KNOB INSTALLATION KIT • Includes one 1" and one 2" bi-metal hole saws, mandrel, adapter and guide • Guide included for quickly and easily centering drilling locations 99 • 1,500 RPM max. 99 8105777 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

BI-METAL HOLE SAWS

8 PC HOLE SAW KIT • Includes: 5 hole saws sized 2-1/2", 3", 3-1/2", 4" and 5", 1 mandrel, 1 reinforced plate, and 1 hex key • Suitable for wood or plastic 99 8005853 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . 11 PC HOLE SAW KIT • 8 sizes of saws with bit and Allen key • Cuts: 3/4" to 2-1/2" • Suitable for wood or plastic 99 2920667 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 16 PC HOLE SAW KIT (SHOWN) • Includes 12 hole saw sizes (3/4" to 5"), 2 mandrels, hex, and reinforced plate • Suitable for cutting wood or plastic • O’all dim.: 8.5" x 6" x 2" • Poly case 99 8006974 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . .

9 9

• High speed steel edge welded to alloy steel back for heavy duty cutting • Cuts most machinable materials, sheet metal, nail-embedded wood, plywood, plastics, pipe and conduit Size RPM Wt. (lbs.) ITEM PRICE 3/4" 3,000 0.1 8033601 4.99 7/8" 3,000 0.1 8033610 5.49 1" 2,700 0.1 8033647 5.49 1-1/8" 2,700 0.2 8033656 5.99 1-1/4" 2,400 0.2 8033665 6.49 1-1/2" 2,400 0.2 8033674 6.99 1-3/4" 2,100 0.2 8033709 7.99 2" 2,000 0.3 8033718 9.99 2-1/8" 2,000 0.3 8033727 10.99 2-1/4" 2,000 0.3 8033745 11.49 2-1/2" 1,800 0.5 8033763 11.99 3/8" hex shank. 3/4" to 1-1/8" MANDREL 8018806 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . 1-1/4" to 2-1/2" MANDREL 8018771 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . .

799 1199

8 PC TUNGSTEN CARBIDE HOLE SAW KIT

HOLE SAWS & GRINDING BITS

HOLE SAW KITS

BI-METAL HOLE SAW KITS • Tungsten carbide hole saws designed for masonry applications such as tile, soft brick, porous concrete and more • Includes: 5 saws: 1-1/4", 2", 2-1/2", 2-3/4" and 3-1/8", arbor and pilot drill, 10" tungsten carbide half-moon file, and storage case • 1,500 RPM max. 99 8105769 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . .

2 PC DRYWALL SCREW ADAPTER

• Cuts holes in various types of metal • Comes with mandrel adapter, hex key wrench, and storage box 7 PC KIT • Includes mandrel • Sizes: 7/8", 1", 1-1/8", 1-3/8", 1-1/2" 8018753 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . 9 PC KIT • Includes 2 mandrels • Sizes: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", and 2-1/2" 8018762 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . 13 PC KIT (SHOWN) • Includes 3 mandrels • Sizes: 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", and 2-1/2" 8018744 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . .

2999 3999

• Changes your power drill into an automatic screwdriver • Ensures a proper countersink of screw • 1/4" hex shank 2921633 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

4999

199/pkg. DIAMOND POINT BIT SETS

ROTARY FILES • For cutting hard and soft metal A • High speed tool steel • Works on most air tools • Shank: 6 mm (1/4" shank) • Max. speed: 6,000 RPM

Wt. 0.1 lbs.

A) 2990018 – 1/2" x 1-1/4" B) 2990026 – 1/2" x 3/4" C) 2990034 – 1/2" x 1-1/4" . . . . . . . . . . . 3 PC ROTARY FILE SET Includes one each of above rotary files. 2990307 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . .

• For die grinders or drills • Assorted diamond point grinding bits • 25,000 RPM max. 10 PC SET C • 150 grit • 1/4" shank 8111890 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . 20 PC BIT SET • 1/8" shank • Includes case and see through lid 3410667 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 49 /ea. 30 PC BIT SET (SHOWN) • 150 grit • 1/8" shaft 99 /set 8048993 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

499 599 799

167

GRINDING BITS & ACCESSORIES

6 PC HSS ROTARY FILE SET

CARBIDE BURRS

• 1/4" shank • Contains: 1/4" x 1" cylinder milling cutter, 1/2" by 1" cone milling cutter, 1/2" by 1" lobar milling cutter, 1/2" by 1" cylinder round milling cutter, 1/2" by 1" flame milling cutter, and 1/2" x 1" cylinder milling cutter 99 8121345 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

3 PC HSS ROTARY FILE SET • 1/4" shank • 1/2" by 1" cylinder • 1/2 by 3/4" ball • 1/2 by 1" cone 8121352 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

• Carbide burr with a 1/8" shank • Designed for drilling and shaping all ferrous metals and stainless steel Wt. 0.1 lbs.

8144057 – CYLINDER 8144065 – BALL NOSE 8144073 – BALL 8144081 – PEAR 8144107 – TAPERED BALL NOSE 8144115 – FLAME 8144123 – TAPERED . . . . . . . . . . . . . . . . . . . . . . .

599

5 PC SHAPING

1799 CUTTER SET

10 PC GRINDING STONE KIT • 25,000 RPM max. • 1/8" shank x 2" long 3410187 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• For rounding, shaping and patterning woods, soft non-ferrous metals, plastics, and rubber • Various shaped heads approx. 3/8" dia. x 7/8" long with 1/4" shaft 99 49 3410297 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

4 PC MOUNTED BIT SET

MINI DRILL ACCESSORY SETS

• 1/8" shank • 2 x 1/2" bits • 2 x 1/4" bits 8121527 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

5 PC GRINDING STONE KITS

• 25,000 RPM max. • 1/4" shank Wt. (lbs.) 0.2 SMALL 0.3 MEDIUM

ITEM 3410225 3415387

PRICE 3.99/set 5.99/set

CHAIN SAW SHARPENING KIT

INDIVIDUAL ROTARY STEEL CUTTERS • For use on metal, wood, or plastic • 1/8" shank Wt. 0.1 lbs.

A) 3410126 – CYLINDER B) 3410127 – FLAME 99 C) 3410128 – BALL . . . . . . . . . . . . . . . . . . . . . /ea. D) 8 PIECE ROTARY STEEL CUTTER SET • Contains various sizes and shapes of rotary cutters • Use on metal, wood, or plastic 99 /set 99 3410125 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . E) 12 PC BURR AND DRILL SET • Solid carbide • 1/8" shank for drilling and shaping 99 3400079 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . /set

Includes guide attachment and 4 bits: 5.5 mm (7/32"), 4.8 mm (3/16"), 4.5 mm (11/64"), and 4.0 mm (5/32"). 8112203 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

CHAIN SAW SHARPENING STONE SET

1/8" shank. Wt. 0.1 lbs.

168

Size 5/32" 3/16" 7/32" 1/8"

ITEM 8121394 8121436 8121501 8121519

PRICE

299/ea.

2-1/2" x 1" GRINDING STONE • 1/4" shank • Aluminum oxide 8121360 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

DIAMOND WHEEL SET

• For drills or die grinders • This system allows for quick interchanging of different discs

• 25,000 RPM max. • For cutting ceramic, glass, metal and plastic • Includes a 1/8" shank mandrel and two 3/4" dia. diamond cutting wheels 49 3410286 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

5 PK 2" SURFACE CONDITIONING DISCS • Excellent for deburring, blending, cleaning, polishing, and finishing • Use on stainless steel, ferrous, and non-ferrous metals • 25,000 RPM max. • Use with 2" arbor 3410858 (see below) 3410976 – Fine 3410975 – Med 99 /pkg. 3410973 – Coarse . . . . . . . . . . . . . . . . . .

2" ARBOR FOR CONDITIONING DISCS • Velcro surface • For above conditioning discs • 25,000 RPM max. 3410858 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

499

10 PK 2" VELCRO SANDING DISCS • Primary application: ferrous and non-ferrous metals • Can also be used on wood, plastic, fibreglass, etc. • 25,000 RPM max. • Use with 2" arbor 3410845 (see below) 3410970 – 80 grit 3410989 – 180 grit 99 /pkg. 3410972 – 320 grit . . . . . . . . . . . . . . . . . .

2" ARBOR FOR SANDING DISCS • Velcro surface • Use with above sanding discs • 25,000 RPM max. 3410845 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

499

DIAMOND CUTTING WHEELS 1/8" shank. 1-1/2" DIA 8112377 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 1-3/4" DIA 8112385 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

Contains five 3" x 1/32" A60T metal cutting cut-off wheels and mandrel. 3416591 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

1199

2" WOOD SAW

• 1/8" shank • Drills, saws, reams, and cuts • For wood, plastic, particle board, etc. 8112369 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

1-3/4" DIAMOND CUTTING WHEEL • 1/8" shank • For cutting ceramic, glass, metal, and plastic 8004544 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

HIGH SPEED STEEL CUTTING SAWS • 1/8" shank • 20,000 RPM max. 1-1/4" DIA 8112252 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 1-3/4" DIA 8112351 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399 499

4 PC CUT-OFF WHEEL SET

399 499

5 PC DIAMOND CUTTING WHEEL SET Includes: four 1" dia. cutting wheels and one 1/8" mandrel. 8049025 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CUT-OFF WHEEL KIT

CUTTING & POLISHING

METAL PREPARATION SYSTEM

• Mandrel • Three 3" x 1/16" x 3/8" cut-off wheels • Metal A54T BF 3411568 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

REPLACEMENT 3 PC COLLET SET

899

Sizes: 1/8", 3/32", and 1/4". 3410313 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

599/set

169

CUTTING, GRINDING & POLISHING

MINI CUT-OFF WHEELS

MINI SAWS A

• Come with 1/8" shank • 25,000 RPM max. Size Quantity Wt. (lbs.) ITEM PRICE 1-1/4" 5 0.1 8145898 3.99 1-1/2" 5 0.1 8145914 3.99 10 PC CUT OFF WHEEL SET • 5 ea 1-1/4" cutting wheels • 5 ea 1-1/2" cutting wheels • Mesh covered wheels for extra strength 99 8151524 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

A) SAW BLADE 3" dia. x 1/4" shank. 3416963 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) WOOD and PLASTIC SAW BLADE 4" dia. x 1/4" shank. 3416971 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599 599

10 PC CUT OFF WHEELS

1-3/8" dia. 8145922 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

HIGH SPEED METAL CUT-OFF WHEELS

499

SAW KIT

• For cutting, grinding, or slotting of hard or ferrous metals • Use with electric drills or die grinder • Use with mandrel 3414562 (sold separately) • 3/8" bore • Resin bonded aluminum oxide grain • Double fibreglass reinforcement Thickness Max. RPM Grit ITEM PRICE 1/16" 30,600 A36T 8009540 1.69 2" 1/16" 30,600 A60T 8009557 1.69 1/32" 25,000 A60T 8009565 1.99 1/16" 25,000 A36T 8009573 1.99 3" 1/16" 25,000 A60T 8009581 1.99 1/8" 25,000 A36T 8009599 2.19 1/16" 19,000 A36T 8009607 2.99 4" 1/16" 19,000 A60T 8009615 2.99

20 PC DRUM SANDING SET

• Includes 2 blades for cutting soft metals, wood, plastic, etc. • Includes mandrel for use in die grinders and drills 8003272 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

1199

7 PC HSS SAW BLADE SET

• For die grinders with 1/8" shank • Blades to cut wood, aluminum alloy, and non-ferrous metals • Includes: one 5/8" blade, one 3/4" blade, two 1" blades, and two 1-1/4" blades 8121337 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

10 PC 3" SANDING/POLISHING DISC KIT

• 1/4" shank arbor suitable for use with rotary tools and drills • 1/8" shank • 20,000 RPM max. • Set includes 4 rubber drums, sizes: 1/2" x 1/2", • Kit includes: arbor, six 3" sanding discs 3/4" x 1", 1" x 1", and 1-1/4" x 1" (two 80 grit, two 120 grit and two 180 grit), • Includes: 2 fine and 2 coarse sanding sleeves one 3" stripping disc (150 grit), and one 3" for each drum buffing disc (80 grit) 99 99 8112237 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . 8104176 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

158 PC DIE GRINDER & CUT-OFF KIT

25 PC DRUM SANDING SET

170

• Includes 2 coarse (80 grit) and 2 fine (120 grit), • Shank diameter 1/8" aluminum oxide sanding sleeves per drum • Kit includes: 9 diamond point bits, 5 mini wire • 5 rubber sanding drums each of: brushes, 3 milling cutters, 2 sanding drums with 1/2" x 1/2" with 1/8" shank 24 pc. replacement discs, 1 tapping screw for 3/4" x 1" with 1/4" shank 9 felt buffing wheels and felt bob, 5 aluminum 1" x 1" with 1/4" shank oxide grinding points, 2 diamond cutters, 1-1/2" x 1-1/2" with 1/4" shank 1 wood saw; 59 cut-off wheels, 36 sanding 2" x 1-1/2" with 1/4" shank discs, and 1 grinding stone 99 99 8112393 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . 8005851 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

C) SANDING DISCS • Fibre back • Double resin bonded Aluminum Oxide • For sanding fibreglass, wood, metal, and plastic

Wt. 0.1 lbs.

PRICE 9.99 11.99 12.99 19.99

B) CENTRE LOCKING NUT For attaching 4-1/2", 5", and 7" backing pad to grinders with 5/8" x 11 NC thread. 3410509 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

ITEM 3410441 3410442 3410443 3410444

A) BACKING PADS Size Wt. (lbs.) 4" 0.2 4-1/2" 0.2 5" 0.2 7" 0.3

4-1/2"

399

8 PC 2" SANDING DISC KIT • 1/4" shank arbor • Suitable for use with rotary tools and drills • 30,000 RPM max. • Kit includes: arbor, six 2" sanding discs (two 60 grit, two 80 grit and two 120 grit), and one 2" surface conditioning disc (80 grit) 99 8104184 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

Grit 24 36 50 80 24 36 50 80 24 36 50 80 24 36 50 80

ITEM 8146243 8146250 8146268 8146276 8146284 8146292 8146300 8146318 8146326 8146334 8146342 8146359 8146367 8146375 8146383 8146391

PRICE/disc

79¢ 99¢ 119 149

6 PC COLLET SET Contains: 0.8-1.0 mm, 1.3-1.5 mm, 1.8-2.0 mm, 2.2-2.4 mm, 2.8-3.0 mm, and 3.0-3.2 mm collets. 8112211 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CUTTING, GRINDING & POLISHING

SANDING DISC SYSTEM for ANGLE GRINDERS

299

MANDREL

699

• For air and electric die grinders and drills • 1/4" and 3/8" arbor, 1/4" shank • 18,000 RPM max. 69 2970002 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . /ea.

MANDREL • 1/4" shank • Can be used on a drill or die grinder 3414562 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

3 PC FELT BOB SET

BUFFING & POLISHING BUFFS

1/4" shank. 8145930 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

MINI POLISHING SET D • 1/4" shank • 12,000 RPM max. (no load) Style Size Wt. (lbs.) Small 0.1 D) CYLINDER Large 0.3 2" 0.1 E) 3" 0.1 MUSHROOM 4" 0.3 Small 0.2 F) TAPER Large 0.2

ITEM PRICE 8125932 3.99 8125957 5.99 8125270 3.99 8125262 5.49 8125288 7.49 8125874 4.99 8125908 6.49

3 PC BUFFING SET • 1/4" shank • Contains: 2" mushroom, tapered, and cylindrical buff 8121121 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

• For polishing metal and plastic • Max. 2,500 RPM • Includes 1" wool wheel, 1-1/2" cloth wheel and 1/8" mandrel 8125965 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

349

MINI POLISHING SET

Contains: 3 buffing wheels, 1/4" mandrel, red rouge and green polishing compounds. 99 8125973 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

171

CUTTING, GRINDING & POLISHING

POLISHING & SANDING KITS

BUFFING WHEELS C

A E

B A) 6" KIT (SHOWN) Contains: rubber backing pad with 1/4" arbor sanding disk and lambs wool polishing bonnet. 99 3410303 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . 6" RUBBER BACKING PAD ONLY 99 3410306 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . 6-1/2" POLISHING BONNET ONLY 99 3410304 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 5 PC KIT Contains: 3 buffing wheels, mandrel, red rouge and white diamond compound. 99 8006629 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

6 3 3

22 PC DIE GRINDER POLISHING KIT

Perfect for polishing metal, plastic and hard rubber. C) 6" TREATED WHEEL 1/2" bore. 8066607 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 6" LOOSE SEWN WHEEL 80 ply with a 1/2" bore. 8066490 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 6" CLOTH WHEEL 80 ply with a 1/2" bore. 8066615 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . F) 6" BUFFING WHEEL 1/2" bore, 1/2" thick. 3414844– Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . G) 8" TREATED WHEEL 5/8" bore. 8066656 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . H) 8" LOOSE SEWN WHEEL 80 ply with a 5/8" bore. 8066482 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . I) 8" CLOTH WHEEL 80 ply with a 5/8" bore. 8066649 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . J) 10" CLOTH WHEEL 80 ply with a 5/8" bore. 8066573 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

699 799 999 899

1199 1199 1199

• Two 3/8" dia. felt bobs • Six 1/2" dia. felt wheels • Two 1" dia. felt wheels • Six grinding points with 3/32" shank • Two replacement mandrels with 1/8" shank • 1/8" collet • 7/8" dia. polishing wheel • Polishing compound • 3/4" steel wire brush with 1/8" shank 8121147 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

6 PC BUFFING and POLISHING KIT

599

125 PC DIE GRINDER ACCESSORY KIT

Contains: 3 buffing wheels, 1/4" mandrel, red rouge and green polishing compounds. 99 8125973 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

22 PC DIE GRINDER POLISHING KIT

172

Contains: • Two 3/8" dia. mini felt bobs • Six 1/2" dia. • Kit includes: 1 brush, 2 pc diamond point bit set, mini felt wheels 2 pc mandrel, 1 grinding stone, 5 cutting discs, • Two 1" dia. felt wheels 2 sanding drums with 6 replacement discs, • Six mounted grinding points with 3/32" shanks 3 aluminum oxide grinding points, 3 silicon • Two replacement mandrels with 1/8" shank carbide-grinding points, 6 polishing pads, • One 7/8" dia. wire wheel brush with 1/8" shank 2 stainless steel brushes, and 1 pc carrying case • One 1/8" collet • Mini sanding discs: 36 fine, 36 medium, and • One 7/8" dia. cut off wheel 20 coarse grits 99 • Polishing compound 99 8018842 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . 8048659 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

A D

C) JEWELER'S ROUGE • For use on buffing wheels • Polishes brass, copper, gold, and stainless steel WHITE – 1 OZ. 99 3410095 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . RED – 4 OZ. 99 2944494 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . B D) 4 OZ BLUE POLISHING COMPOUND For polishing plastic and metal. A) 14 PC ALUMINUM POLISHING KIT 99 8066466 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . Kit includes 3 waxes, 6 buffing wheels, and 5 felt bobs. 99 E) 4 OZ GREEN POLISHING COMPOUND 8090789 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . For polishing hard metal and stainless steel. 99 8066474 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . B) 18 PC DELUXE POLISHING KIT Kit includes 6 waxes (for aluminum and F) 4 PC POLISHING COMPOUND stainless steel), 7 buffing wheels, and 5 felt • For use with buffing wheels only bobs. 99 • Black emery, red rouge, brown tripoli, 8090805 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . and white diamond 99 2940427 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . /set

1 2 4

MINI BUFFING and POLISHING WHEELS

MINI POLISHING SETS

H G G) BUFFING WHEEL • 4" buffing wheel with 1/4" shank • 2,500 RPM max. • O’all dim.: 6" x 5-3/4" x 1" 3411050 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . H) BUFFING BONNET Soft fiber. 1/4" shank. 8040443 – 3" DIA . . . . . . . . . . . . . . . . . . . . . . . . 8040452 – 4" DIA . . . . . . . . . . . . . . . . . . . . . . . .

CUTTING, GRINDING & POLISHING

POLISHING COMPOUNDS

STAINLESS STEEL & ALUMINUM POLISHING KITS

I I) MINI JEWELRY POLISHING SET Contains 3 polishing wheels, 1/8" mandrel, and stick of polishing compound. 99 3410132 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . /set 99 J) BUFFING KIT • Buffing and polishing kit includes two 2-1/2" buffing wheels with 1/4" shank, white diamond block, and a red rouge block 99 • O’all dim.: 8-1/2" x 7-3/4" x 1-1/2" 99 99 3400232 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

4 4 5

Our wide variety of ENKAY polishing compounds are great for a number of different materials. They are designed for use with cloth type buffing wheels only. From cutting down material to removal of deep scratches, to producing a mirror-like finish on precious metals, we have all your needs covered. BLACK EMERY - Excellent cutting compound for removing scratches. Use on metals such as copper, brass, aluminum, stainless steel, nickel, and iron. BROWN TRIPOLI - Widely used compound for cutting down and bringing out a high lustre on non-ferrous metals. Use on copper, brass, and aluminum. WHITE DIAMOND - Ultra fine dry grade which is not as fine as red rouge. Produces a clear brilliant mirror finish. Use on metals such as chromium, stainless steel, carbon steel, brass, and aluminum. RED ROUGE - Developed for jewelers for buffing soft and precious metals to a brilliant mirror finish. Use on gold, silver, platinum and brass.

173

CUTTING, GRINDING & POLISHING

5/8" STAINLESS STEEL MINI WIRE BRUSH

WIRE BRUSHES 1" WIRE TUBE BRUSH

• 25,000 RPM max. • For drill or die grinder use 8053900 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Lasts up to 10 times longer than wire brushes • Abrasive grit is impregnated throughout each bristle • Brush has a course grit • Will not rust and maintains shape • 1/4" shank • Ideal for paint removal, corrosion, weld scale, and surface rust, preparing metal surfaces for primers and paint 99 8170417 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

MINI BRISTLE & WIRE BRUSH SET

• Variety of 5 bristle and wire brushes • Use for cleaning and polishing metal • 1/8" and 3/32" shanks 8053189 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

NYLON ABRASIVE BRUSHES

A • Lasts up to 10 times longer than wire brushes • Abrasive grit is impregnated throughout each bristle • All brushes have a course grit • Will not rust and maintains shape • 1/4" shank IDEAL FOR: • Paint removal, corrosion, weld scale, and surface rust • Preparing metal surfaces for primers and paint A) 1" NYLON END BRUSH 99 8170342 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

2" 1/4" E) Brass coated wheel 3" 1/4" 4" 1/4" F) Twisted stainless 3" 5/16" steel wire wheel 2" 1/4" 3" 1/4" G) Brass cup 4" 5/16" H) Twisted stainless 3" 5/16" steel wire cup J

B) NYLON WHEEL BRUSHES Size Wt. (lbs.) ITEM PRICE 2" 0.1 8170359 4.99 3" 0.2 8170367 7.99 4" 0.3 8170375 8.99 C) 2" NYLON CUP BRUSHES 99 8188054 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 4" FLAP WHEEL BRUSH 99 8170391 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

9 9

Size Shank

Wt. (lbs.) ITEM PRICE 0.1 3410630 1.49 0.2 3410631 2.19 0.3 3410632 2.99 0.3

3410646

3.99

0.2 0.3 0.7

3410634 3410635 3410636

2.49 2.99 3.99

0.5

3410647

4.99

399/set D

WIRE BRUSHES

Type

149

I) 3 PC BRASS COATED BRUSH SET • 2" cup brush, 2" wire brush, and 1" end brush • 7,500 RPM max. • 1/4" shank 99 3410502 – Wt. 0.4 lbs. . . . . . . /set

WIRE CUP BRUSHES & WHEELS • Cup brushes used on angle grinders for weld cleaning, rust removal and surface preparation • 5/8"-11 arbor

Type

174

Size Trim length Max. RPM Wt. (lbs.) ITEM PRICE 3" 7/8" 14,000 0.6 8100265 19.99 4" 1-1/8" 9,000 1.9 8100273 23.99 J) Knotted 6" 1-3/8" 6,600 3.7 8100281 39.99 3" 13/16" 14,000 0.6 8100315 15.99 K) Crimped 5" 1-3/8" 8,000 1.7 8100356 24.99 L) CRIMPED WIRE BENCH GRINDER WHEELS – 1" Face width. 6" – 6,000 RPM max., 5/8"-1/2" arbor, 8" – 4,000 RPM max., 5/8" arbor, 1-1/8" trim length. 99 1-9/16" trim length. 99 8100208 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . 8100232 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

• Cup brushes used on angle grinders for weld cleaning, A rust removal and surface preparation • 5/8"-11 arbor Type Size Trim length Max. RPM Wt. (lbs.) 3" 7/8" 14,000 0.6 4" 1-1/8" 9,000 1.2 A) Knotted 6" 1-3/8" 6,600 2.7 3" 13/16" 14,000 0.5 B) Crimped 5" 1-3/8" 8,000 1.3

Item 8170441 8170466 8170508 8170482 8170474

Price 6.99 14.99 19.99 6.99 15.99

C) CRIMPED WIRE BENCH GRINDER WHEELS – 1" Face width 6" – 6,000 RPM max., 5/8"-1/2" arbor, 8" – 4,000 RPM max., 5/8" arbor, 1-1/8" trim length. 99 1-9/16" trim length. 8100208 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . 8100232 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

DIAMOND & ABRASIVE WHEELS D) SEGMENTED STYLE • A segmented style wheel is a general purpose wheel for cutting concrete, masonry, tile, granite, marble, asphalt, and brick • Use for wet or dry cutting applications E) TURBO STYLE • These blades are designed to cut faster than the segmented style blade and will also give you a smoother cut. The turbo style blade is designed to give exceptionally long life. • For cutting concrete, masonry, tile, granite, marble, asphalt, and brick • Use for wet or dry cutting applications F) CONTINUOUS RIM A continuous rim diamond wheel is designed to provide the smoothest cut of all 3 styles of diamond wheels. The outer rim is best suited for wet cutting and any applications where a smooth cut is required.

DIAMOND CUTTING WHEELS Use with angle grinders or circular saws.

4-1/2"

8101594 8101644 8101651 8101677 8101693 8101701 8101719 8101735 8101743

PRICE

Wt. 0.2 lbs.

899 5"

ITEM

• 7/8" arbor • Depressed centre (type 29) • Zirconia grit

999 1499

4-1/2" 5" 7"

Z36 Z60 Z80 Z36 Z60 Z80 Z36 Z60 Z80

Size

FLAP DISCS

TYPE 29 ZIRCONIA FLAP DISCS • Removes material quickly and leaves a high quality finish in one step, providing an advantage over conventional fibre resin discs • Premium abrasive cloth provides up to 15x longer life than fibre resin discs • Zirconia grit is 3x faster than fibre resin discs • Type 29 backing provides optimum grinding angle, allows full use of the disc and won’t mar • 7/8" arbor Wt. Max RPM (lbs.) 13,300 0.2 13,300 0.2 13,300 0.2 12,200 0.3 12,200 0.3 12,200 0.3 8,700 0.6 8,700 0.6 8,700 0.4

Max Wt. RPM (lbs.) ITEM PRICE 4.5" 13,000 0.3 3411010 6.99 D) Segmented 5" 12,000 0.3 3411011 11.99 7" 8,500 0.7 3411012 15.99 4.5" 13,000 0.3 8005106 6.99 5" 12,000 0.3 8005151 11.99 E) Turbo 7" 8,500 0.8 8005080 15.99 4.5" 13,000 0.3 8032041 6.99 F) Continuous 5" 12,000 0.3 8032069 11.99 Rim 7" 8,500 0.8 8032078 15.99 Type

FLAP DISCS

Grit

3499

CUTTING, GRINDING & POLISHING

WIRE CUP BRUSHES & WHEELS

Grit Max. RPM Z36 13,300 Z40 13,300 Z60 13,300 Z80 13,300 Z36 12,200 Z40 12,200 Z60 12,200 Z80 12,200 Z36 8,400 Z40 8,400 Z60 8,400 Z80 8,400

ITEM 8125494 8125544 8125551 8125569 8125577 8125585 8125593 8125601 8125619 8125627 8125635 8125643

PRICE

389 419 899

175

CUTTING & GRINDING

Exclusively at TYPE 27 DEPRESSED CENTER GRINDING & CUTTING WHEELS • 3 full sheets of fibreglass for added durability • 100% virgin grains for enhanced removal and life METAL THIN CUTTING – A60T Size Max. RPM Wt. ITEM (dia. x width x arbor) (lbs.) 4" x 0.045" x 5/8" 19,000 0.1 8099947 4-1/2" x 0.045" x 7/8" 13,300 0.1 8099954 5" x 0.045" x 7/8" 12,200 0.1 8099962 7" x 0.055" x 7/8" 8,700 0.2 8099970 PIPELINE CUTTING – A24R 4-1/2" x 1/8" x 7/8" 5" x 1/8" x 7/8" 7" x 1/8" x 7/8"

13,300 13,300 12,200

PRICE 2.99 2.99 3.49 4.99

0.2 0.3 0.6

8099897 8099905 8099939

3.79 4.49 5.49

GENERAL PURPOSE METAL GRINDING – A24R 4" x 1/4" x 5/8" 15,200 0.3 4-1/2" x 1/4" x 7/8" 13,300 0.4 5" x 1/4" x 7/8" 12,200 0.4 7" x 1/4" x 7/8" 8,700 0.9

8099814 8099822 8099830 8099848

3.49 3.99 1.23 6.99

CONCRETE/MASONRY – C24R 4" x 1/8" x 5/8" 15,200 4-1/2" x 1/8" x 7/8" 13,300 5" x 1/8" x 7/8" 13,300

8099855 8099863 8099889

2.99 1.15 4.49

0.2 0.2 0.2

TYPE 1 STRAIGHT CUTTING WHEELS

• For heavy duty, fast cutting of all types of ferrous metals and stainless steels • Double reinforced fibreglass for increased durability METAL CUTTING – A60T 4-1/2" x 0.045 x 7/8" 13,300 0.1 8100125 3.29 5" x 0.045 x 7/8" 12,200 0.1 8100158 3.99 STAINLESS STEEL CUTTING – A30S 4-1/2" x 1/8" x 7/8" 13,300 0.2 8100174 3.49

TYPE 1 STRAIGHT CHOP SAW WHEELS GENERAL PURPOSE – A24R • Premium grains and high quality bonds offer a long service life and fast cutting • Double reinforced fibreglass for increased durability Application Metal Cutting General Purpose

Size Max. Wt. (dia. x width x arbor) RPM (lbs.) 12" x 7/64" x 1" 14" x 7/64" x 1"

5,000 0.9 4,300 1.2

ITEM

PRICE

8099988 8099996

11.99 11.99

EXTENDED PERFORMANCE – A24R – Premium ceramic coated grain for faster cutting and longer life Light Gauge Stud 14" x 7/64" x 1" 4,300 1.2 8100000 13.99

TYPE 1 ABRASIVE SAW BLADES • Premium grains and high quality bonds offer a long service life and fast cutting. • Double reinforced fibreglass for increased durability Application Size Type Max. Wt. ITEM PRICE (dia. x width x arbor) RPM (lbs.) Concrete/ 7" x 1/8" x 5/8" C24R 8,700 0.4 8100067 4.49 Masonry Metal Cutting 7" x 1/8" x 5/8" A24R 8,700 0.3 8100034 4.99 Metal Cutting 8" x 1/8" x 5/8" A24R 7,600 0.4 8100059 5.79

TYPE 1 ABRASIVE SAW BLADES

176

STAINLESS STEEL – A30S Size (dia.x width x arbor) 12" x 3/32" x 1" 14" x 3/32" x 1"

Max. RPM 5,000 4,300

Wt. (lbs.) 1.0 1.4

ITEM

PRICE

8100018 8100026

13.99 17.99

CUTTING & GRINDING

DEPRESSED CENTRE CUTTING WHEELS Wt. 0.1 lbs. CUT OFF WHEELS A30 material: suitable for ferrous metals (iron, steel, welds, etc.). Size Max. RPM ITEM 4" x 1/8" x 5/8" 15,200 8133480 4-1/2" x 1/8" x 7/8" 13,300 8133548 5" x 1/8" x 7/8" 12,200 8133555 7" x 1/8" x 7/8" 8,600 8133563 9" x 1/8" x 7/8" 6,600 8133571 SUPER THIN CUT OFF WHEELS • A46 material: suitable for ferrous metals (iron, steel, welds, etc.) • 1/16" super thin for fast cutting Size Max. RPM ITEM 4" x 1/16" x 5/8" 15,200 8133589 4-1/2" x 1/16" x 7/8" 13,300 8133605 5" x 1/16" x 7/8" 12,200 8133613 7" x 1/16" x 7/8" 8,600 8133621 9" x 1/16" x 7/8" 6,600 8134959 MASONRY CUT-OFF WHEEL C46 material: for masonry, stone, brick, concrete, etc. Size Max. RPM ITEM 4" x 1/16" x 5/8" 15,200 8135006 4-1/2" x 1/16" x 7/8" 13,300 8135014 5" x 1/16" x 7/8" 12,200 8135022 7" x 1/16" x 7/8" 8,600 8135030 9" x 1/16" x 7/8" 6,600 8135048 MASONRY GRINDING WHEELS C24 material for masonry, stone, brick, concrete, etc. Size Max. RPM ITEM 4" x 1/4" x 5/8" 15,200 8135188 4-1/2" x 1/4" x 7/8" 13,300 8135196 5" x 1/4" x 7/8" 12,200 8135204 7" x 1/4" x 7/8" 8,600 8135212 GRINDING WHEELS Suitable for ferrous metals (iron, steel, welds, etc.). Size Max. RPM ITEM 4 x 1/4" x 5/8" 15,200 8133829 4-1/2 x 1/4" x 7/8" 13,300 8133837 5 x 1/4" x 7/8" 12,200 8133845 7 x 1/4" x 7/8" 8,600 8133852 9 x 1/4" x 7/8" 6,600 8134967

PRICE 1.39 1.49 1.89 2.59 3.49

PRICE 1.29 1.39 1.79 2.49 3.49

PRICE 1.79 1.99 2.39 2.99 3.89

PRICE 1.99 2.59 1.99 2.99

PRICE 1.49 1.59 1.99 2.99 4.79

CHOP SAW WHEELS

HIGH SPEED WHEELS

• Suitable for general purpose metal cutting • A24 aluminum oxide grit METAL CUTTING WHEELS 12" x 9/64" x 1", 5,100 RPM max. 8164014 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 14" x 9/64" x 1", 4,400 RPM max. 8164022 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . MASONRY CUTTING WHEELS 12" x 1/8" x 1" 5,100 RPM max. 8164030 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . 14" x 1/8" x 1" 4,400 RPM max. 8164048 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Suitable for masonry, stone, brick, concrete, etc • C24 silicon carbide grit HIGH SPEED STEEL CUTTING WHEELS 12" x 9/64" x 1", 6,400 RPM max. 8164055 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 14" x 9/64" x 1", 5,500 RPM max. 8164063 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . HIGH SPEED MASONRY WHEELS 12" x 1/8" x 1", 6,400 RPM max. 8164071 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . 14" x 1/8" x 1", 5,500 RPM max. 8164089 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

399 499 499 599

449 549 549 649

177

• Carbide tipped saw blade designed for cutting metal • 24 teeth x 7-1/4" dia. with 5/8" arbor • 6,000 RPM max. • Capacity in mild steel: 1/8" to 1/4" (3 to 7 mm) 8058885 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

HIGH SPEED WHEELS

• Thicker fibreglass is used to withstand extreme applications and hold up to high speeds • Formulated to provide fast, free cutting and good life • Ideal for gas powered chop saws • 1/8" thickness • 20 mm arbor Wt. Size ITEM (lbs.) 12" 1.0 8101909 14" 1.8 8101917 12" 0.9 8101925 99 14" 1.7 8101933

RECIPROCATING SAW BLADES

C24P A24R

CUTTING & GRINDING

7-1/4" METAL CUTTING SAW BLADE

PRICE 5.99 9.99 5.99 9.99

3 PACK HEAVY DUTY BI-METAL DEMOLITION SAW BLADES

INDIVIDUAL HEAVY DUTY BI-METAL SAW BLADES • 9" long x 7/8" extra wide x 0.062" extra thick • Long lasting, fast cutting for demolition work • Cuts metal and pipe, heavy metal, plate contoured shapes and tubing 99 3410711 – Wt. 0.4 lbs. . . . . . . . . . . . . . . /pkg.

High speed steel edge with alloy steel back for heavy duty, longer life performance.

Wt. 0.1 lbs.

Blade Teeth Type ITEM Length /in. of Cut *6" 10 Nail Cutting 3413184 *12" 6 Rough 3413200 †6" 14 Smooth 3413242 †6" 18 Extra Smooth 3413259 †6" 24 Fine 3413267

PRICE 3.79/ea. 8.49/ea. 3.79/ea. 3.79/ea. 3.79/ea.

* Wood cutting blades are made to cut asbestos, plastics, hard, soft and nail embedded woods. † Metal cutting cuts steel, stainless steel, cast iron, conduit and ferrous and non-ferrous metals.

6 PC RECIPROCATING SAW BLADES

178

• High performance bi-metal • Three metal cutting, one multi-material cutting, and two wood cutting • Includes 1 of each: 24 TPI, 8 TPI, 14 TPI, 10 TPI, 5/8 TPI, 6 TPI • Combination sets provide a selection of blades for common applications • Vinyl storage pouch 99 8117681 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

RECIPROCATING SAW BLADE SETS

10 PC SET • 1/2" universal shank • Four 6" long 6 TPI wood cutting blades • Two 6" long 10 TPI wood cutting blades • Two 6-1/4" long 18 TPI metal cutting blades • Two 7-7/8" long 6 TPI wood cutting blades 99 8155749 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 14 PC SET (SHOWN) • 1/4" universal shank • Two 4" long 14 TPI pipe/rebar cutting blades • Two 4" long 24 TPI sheet metal cutting blades • Two 6" long 18 TPI masonite cutting blades • Two 6" long 7 TPI fast cut wood blades • Two 8" long 7 TPI fast cut wood blades • Two 9" long 6 TPI pruning/fast cut wood blades • Two 12" long 6 TPI pruning/fast cut wood blades 99 8155665 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

JIG SAW BLADES

WOOD 8180614 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . METAL 8180622 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

99¢ 199

IMPACT SOCKET SETS

Wt. (lbs.)

ITEM

PRICE

7 PC

3/8" Torx T-20, T-25, T-30, T-40, T-50, T-55, and T-60

1.5

8159345

2499

8 PC

• Chrome moly with heat treated black finish • O’all. length: 3-1/16" • HRC: 52° ~ 60° Style Sizes

1/2" Torx T-30, T-40, T-45, T-47, T-50, T-55, T-60, and T-70 1/2" Hex Metric: 6, 7, 8, 10, 12, 14, 17, and 19 mm 1/2" Hex 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", and 3/4"

2.3 2.9 2.9

8159329 8159428 8159469

2999

IMPACT SOCKET ADAPTERS 1/2" F x 3/8" M 3417771 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . 3/8" F x 1/2" M 3417789 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

149/ea. 149/ea.

1/2" F x 3/4" M 3417797 – Wt. 0.3 lbs . . . . . . . . . . . . . . . . . . .

IMPACT SOCKETS

299/ea.

CHROME MOLY SETS

DEEP & SHALLOW SETS

• These professional quality sockets meet demands of the tradesmen who need superior quality • All sets are heavy duty chrome moly steel • 6-point sockets • Flank drive design reduces socket breakage • Complete with metal storage box

37 PC SET Includes: • Sixteen 3/8" dr. deep sockets sizes: 8, 10, 11,12, 13, 14, 17 and 19 mm; 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" • Twenty 1/2" dr. shallow sockets sizes: 10, 11, 12, 13, 14, 17, 19, 21, 22 and 24 mm; 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", SHALLOW SOCKETS 15/16", and 1" Drive Qty. Sizes lbs. ITEM PRICE • One 1/2" to 3/8" adapter • Metal carrying case 1/2" 10 7/16" to 1" 2.8 3410677 21.99 99 3414810 – Wt. 12.4 lbs. . . . . . . . . . . . . . . . . 1/2" 10 * 2.8 3415924 21.99 3/4" 8 1" to 1-1/2" 9.2 3410396 49.99 59 PC SET Includes: • Thirteen 3/8" dr. shallow sockets sizes: 7 to 19 mm • Nine 3/8" dr. deep socket sizes: 5/16" to 13/16" DEEP SOCKETS • Eighteen 1/2" dr. Drive Qty. Sizes lbs. ITEM PRICE shallow sockets sizes: 1/2" 11 3/8" to 1" 6.1 3410685 44.99 9 to 19, 21, 22, 23, 24, 1/2" 11 * 5.7 3415932 44.99 27, 30, and 32 mm • Fifteen 1/2" dr. deep sockets : 3/8" to 1-1/4" 3/4" 8 1" to 1-1/2" 14.7 8006926 89.99 • 3" - 3/8" dr. extension, 3" - 1/2" dr. extension *10, 11, 12, 13, 14, 16, 17, 19, 21, 22, 24 mm • 1/2"F x 3/8"M adapter, 3/8"F x 1/2"M adapter • Sturdy plastic case 99 UNIVERSAL JOINT IMPACT 3410186 – Wt. 20.5 lbs. . . . . . . . . . . . . . . . .

1/2" DR IMPACT WHEEL SOCKET SET

SOCKET SETS

• 7-piece sets • 3/8" drive • Max. 100 ft.-lbs. torque Wt. 2.3 lbs. 3410318 – SAE: 3/8" to 3/4" 3410320 – Metric: 10 to 17 mm . . . .

• Specially designed thin-wall impact sockets will minimize damage to plated lug nuts INDIVIDUAL IMPACT and alloy or plated wheels: uses plastic coated EXTENSION BARS magnetic insert and coated outer sleeve 1/2" drive. • Colour coded for quick and easy reference • Heavy duty chrome moly construction Length Wt. (lbs.) ITEM • Includes the following common sizes: 3" 0.3 3412202 SAE: 13/16", 7/8", 1", and 1-1/16" 5" 0.5 3412210 Metric: 17, 19, and 12 mm 99 10" 0.9 3412228 8003720 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . .

2999/set

PRICE 1.99/ea. 2.99/ea. 4.99/ea.

179

IMPACT SOCKETS

8 PC IMPACT ADAPTER SET

WOBBLE IMPACT EXTENSION BAR SET 3/8" drive x 3", 6", and 8". 8040531 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . 1/2" drive x 3", 6", and 8". 8020795 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . IMPACT EXTENSION BAR SET 3/8" drive x 3", 5", and 10". 8024318 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . 1/2" drive x 3", 5", and 10". 8036234 – Wt. 1.8 lbs.. . . . . . . . . . . . . . . . . . . 99 3/4" drive x 4", 6", and 10". 8044662 – Wt. 5.1 lbs.. . . . . . . . . . . . . . . . . . .

Sizes: 1/4" F x 3/8" M, 3/8" F x 1/2" M, 1/2" F x 3/4" M, 1" F x 3/4" M, 3/8" F x 1/4" M, 1/2" F x 3/8" M, 3/4" F x 1/2" M, 1" F x 3/4" M. 99 8044671 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . .

7 PC TORX SET • 3-1/4" dr. sockets E-6, 7, 8 • 4-3/8" dr. sockets E-10, 12, 14, 16 • Includes socket clip rail 3415288 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

1199 1499 999 1499 2499

1/2" TORQUE LIMITING EXTENSION BARS 80 ft-lbs. 90 ft-lbs. 100 ft-lbs. 150 ft-lbs. 110 ft-lbs. 120 ft-lbs. 140 ft-lbs. • For use with impact wrenches • Helps prevent over-tightening of wheel lug nuts and reduces the risk of breaking studs or damaging alloy wheels • Colour coded for quick reference (see chart) • Heavy duty chrome moly construction • 1/2" drive, 7-3/4" long INDIVIDUAL EXTENSIONS

Wt. 0.8 lbs.

110 ft-lbs. – 8090177 120 ft-lbs. – 8090185 80 ft-lbs. – 8090144 90 ft-lbs. – 8090151 140 ft-lbs. – 8090201 100 ft-lbs. – 8090169 150 ft-lbs. – 8090219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PC SET

65 ft-lbs., 75 ft-lbs., 80 ft-lbs., 90 ft-lbs., 100 ft-lbs., 110 ft-lbs., 120 ft-lbs., 130 ft-lbs., 140 ft-lbs., and 150 ft-lbs. 8090037 – Wt. 6.6 lbs. . . . . . . . . . . . . . . . . . . .

9999

Deep

Shallow

Deep Shallow

INDIVIDUAL 1/2" DR IMPACT SOCKETS Size 1/2" 9/16" 3/4" 1/2" 3/4" 15 mm 18 mm 15 mm 18 mm

Wt. (lbs.) 0.2 0.2 0.2 0.4 0.5 0.2 0.2 0.4 0.5

ITEM 3410921 3415809 3415825 3410926 3415858 3410943 3410944 3410945 3410946

PRICE 1.99/ea. 1.99/ea. 2.99/ea. 3.49/ea. 4.49/ea. 1.99/ea. 1.99/ea. 2.99/ea. 3.49/ea.

1999/ea.

UNIVERSAL IMPACT JOINTS High strength chrome moly steel. Drive Wt. (lbs.) ITEM 3/8" 0.2 8039240 1/2" 0.4 8038018 3/4" 1.5 8038027

PRICE 6.99 8.99 19.99

2-IN-1 FLIP SOCKET & EXTENSION KIT • Use 3" impact extension and double ended impact flip socket (3/4" and 13/16") with 1/2" dr. impact wrench • Fits most car wheel lugs 99 3409521 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

DEEP & SHALLOW SETS 6-Point Sockets

Dr. 3/8" 1/2" 3/4"

180

SHALLOW SOCKETS Wt. Qty. Sizes (lbs.) ITEM PRICE 8 5/16" to 3/4" 1.2 3409513 7.99 8 8, 10 to 14, 17 and 19 mm 1.1 3409323 7.99 10 7/16" to 1" 2.9 3401155 11.99 10 11 to 15, 17, 19, 21, 22 and 24 mm 2.5 3407798 11.99 8 1" to 1-1/2" 8.1 3414760 39.99 8 26, 27, 29, 30, 32, 35, 36 and 38 mm 9.1 3411019 39.99 9 1" to 2" 16.9 3414828 99.99

DEEP SOCKETS Wt. (lbs.) ITEM PRICE 1.9 3408390 13.99 2.0 3409331 13.99 5.5 3408408 19.99 4.7 3408416 19.99 12.1 3414778 74.99 11.7 3411020 74.99 – – –

12 TON LOW

4 TON

20 TON

• Electrostatically painted to prevent corrosion • Heat-treated large diameter extension screw • Automatic oil bypass prevents overextension of ram • Handle included Capacity (tons) 2 4 6 8 12 12 Low 20 20 Low 3 Longstroke 5 Longstroke 8 Longstroke*

Retracted Screw Lift Height Extension 6-3/4" 1-3/4" 4-1/2" 7-3/4" 2-1/4" 5" 8-1/2" 3-1/4" 5-1/4" 8-3/4" 3" 5-1/2" 9-1/4" 3" 5-1/4" 7-1/2" 3" 3-1/2" 10-1/2 2-1/2" 5-1/2" 8" 2-1/2" 2-3/4" 24-1/2" 19-1/2" – 24-1/2" 19-1/2" – 24" – 19"

BOTTLE JACKS

* Clevis Bottom 8 TON

3 & 5 TON

Extended Height 13" 15" 17" 17-1/4" 17-1/2" 14" 18-1/2" 13-1/4" 44" 44" 43"

Wt. (lbs.) 5.7 8.6 9.9 13.5 15.7 16.2 25.5 22.8 23.0 27.8 35.6

ITEM

PRICE

1010004 1010005 1010006 1010007 1010008 1010010 1010009 1010011 1010019 8035896 8186264

15.99 19.99 29.99 29.99 39.99 39.99 49.99 49.99 69.99 89.99 99.99

HORIZONTAL/VERTICAL BOTTLE JACKS

Can operate in any position: vertical, angle, or horizontal. Capacity (tons) Retracted Height 12 9-1/2" 12 Low 7" 20 10-3/4" 20 Low 8-1/4"

12 TON LOW

Lift 6" 3-3/4" 6-1/2" 4"

Screw Extension 3-1/2" 2-3/4" – 3"

Extended Height 19" 13-1/2" 17-1/4" 15-1/4"

Wt. (lbs.) 15.8 14.0 25.4 22.3

20 TON

ITEM

PRICE

8158297 8158313 8158321 8158339

49.99 49.99 64.99 64.99

BOTTLE JACKS

A C • For use with an air compressor or as a manual jack • A & B: Operating pressure: 90-120 PSI • C: Operating pressure: 120-200 PSI

A B C

Capacity (tons) 12 20 20

Retracted Height 10-1/2" 10-1/4" 9-3/4"

Lift 6-3/4" 6-1/2" 5-1/4"

B Screw Extension 3" 3-1/4" 2-3/4"

Extended Height 20-1/4" 20" 17-3/4"

Wt. (lbs.) 28.1 37.0 40.9

ITEM

PRICE

8003605 8003606 1030060

99.99 119.99 199.99

181

FLOOR JACKS

DO NOT USE FLOOR JACKS TO POSITION VEHICLES, OR AS A

FLOOR JACKS

JACK STAND. USE ONLY ON FIRM LEVEL SURFACES.

1-1/2 TON ALUMINUM FLOOR JACK

Weighs under 30 lbs.!

• Lightweight, all aluminum design • Lifting range: 3-1/2" to 14-3/4" • Stroke: 8 to 9 times to reach max. lift 8074668 – Wt. 27.5 lbs. . . . . . . . . . . . . . . . .

16999

2-1/2 TON ALUMINUM/STEEL FLOOR JACK • Lift range: 4" min. height, 19" max. height • Speed lift reaches full service height in 10 strokes under load (3 strokes with no load) • Light weight allows for quick and easy handling 8003252 – Wt. 58.7 lbs. . . . . . . . . . . . . . . . . .

19999

3 TON ALL STEEL FLOOR JACK • Lift range: 5" min. height, 19-1/2" max. height • Lifts to 11-1/2" on first stroke (no load) 99 1030052 – Wt. 82.7 lbs. . . . . . . . . . . . . . . . .

139

2-1/4 TON SHOP DUTY FLOOR JACK • Lift range: 5-1/2" min., 31-1/2" max. height • O’all dim: 46-1/2" x 17" wide 99 1030469 – Wt. 127.6 lbs. . . . . . . . . . . . . .

249

3-1/2 TON SHOP DUTY FLOOR JACK • Lift range: 4" min., 21" max. height • O’all dim: 31-1/2" x 15-1/2" wide • 8 pumps to full service height 8002093 – Wt. 101.4 lbs.. . . . . . . . . . . . . .

17999

HYDRAULIC JACK OIL

FLOOR JACK SADDLE • Fits most 2-1/4 to 3-1/2 ton jacks • 4-3/4" x 4-3/4" rubber lift pad for raising vehicles requiring side lift without marring or damage • 1-3/16" shaft 1090014 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Specially formulated with rust inhibitors, anti-wear agents, and anti-foam agents • 946 ml bottle 99 6420077 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

649

JACK STANDS

182

• Sold in pairs • “Positive Lock” handle • Load must be off saddle column before column can be lowered Cap. Height Wt. (lbs.) ITEM (tons) (min, max) 3 11-1/4", 16-3/4" 15.2 1090554 6 15-1/2", 23-1/4" 28.7 1090547 12 20", 30" 70.0 1090011

PRICE 24.99 49.99 129.99

TRANSMISSION ADAPTER • Cap.: 440 lb. • Remove saddle from floor jack and replace it with this adapter to convert jack to a transmission jack 99 1030477 – Wt. 28.9 lbs. . . . . . . . . . . . . . . . . . .

1-1/2 TON TRANSMISSION JACK

• Universal saddle, brackets, and chain sling are fully adjustable to accommodate transmissions, clutches, and differentials in varying sizes • Safety overload system and safety bypass system prevent damage to cylinder • Chromed ram resists rust • Pump handle rotates 360° • 4 swivel caster wheels allow easy positioning • Lifting range: 8" to 30" 99 1030021 – Wt. 338.0 lbs. . . . . . . . . . . . . . . .

TRANSMISSION/ DIFFERENTIAL JACK • Cap.: 550 lbs. • Lifting range: 8-3/4" to 22-1/2" • Saddle measures: 13" x 6-3/4" • Includes tie-down strap 1030002 – Wt. 37.9 lbs. . . . . . . . . . . . . . . . .

13999

1 TON TRANSMISSION JACK • Lifting range: 7" to 32" • Includes adjustable brackets, chain sling, and tilting universal saddle • Pump handle rotates 360° • Safety overload system • Four 3" steel swivel casters allow for easy positioning 8007056 – Wt. 146.5 lbs. . . . . . . . . . . . . . .

49999

1/2 TON SINGLE STAGE TRANSMISSION JACK

TRANSMISSION/DIFFERENTIAL JACKS

999

• Universal saddle tilts for ease of alignment and includes adjustable brackets and safety chain • 38" wide base with 3" steel swivel casters for stability • Height: 51-1/2" min., 72" max. 1030042 – Wt. 88.0 lbs. . . . . . . . . . . . . . . . .

2 TON GARAGE STAND

• Ideal for holding or supporting items at a precise height • Triangular support base • Lifting range: 69" to 77" • 8" adjustable, ball bearing assisted screw extension 1090005 – Wt. 35.0 lbs. . . . . . . . . . . . . . . . . . .

UNIVERSAL TOOL STAND

9999

2 TON SCISSOR JACK 4" min., 13-1/2" max. height. 8047598 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . . .

19999

2499

• Designed for most common scroll saws, bench drill presses, miter saws, 10" bench table saws, and jointer/planers • 29" high x 9" wide x 19-1/4" long • Rubber feet will not mar floors 8192015 – Wt. 14.5 lbs. . . . . . . . . . . . . . . .

2999

PORTABLE WORK STAND

• 500 lb. capacity • Ideal support for windshields, fenders, body panels and doors for painting and installation • Foam cushions protect painted surfaces • Non skid legs 8125536 – Wt. 18.1 lbs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3499

183

LIFTS/JACKS

FARM JACKS

• 2 ton (4,000 lbs.) cap. • Handle length: 30" • Base size: 4-3/8" x 7" • Lifting saddle: 1-1/2" x 4" 36" HIGH MODEL 1050036 – Wt. 30.4 lbs. . . . . 48" HIGH MODEL 1050034 – Wt. 32.9 lbs. . . . . . 60" HIGH MODEL 1050037 – Wt. 37.2 lbs. . . . . MAINTENANCE KIT 8007177 – Wt. 1.0 lbs. . . . . . . . .

5999 6999 7999 799

• Lift, hoist, pull, or push up to 4,660 lbs. rated capacity • Tested to ASME/ANSI standards • Cast and stamped steel construction includes top winch connector allowing attachment of accessories • Durable powder-coated finish 7,000 lb. rated safety bolt will shear at its max. and load will not lift. 36" HIGH MODEL 99 8000713 – Wt. 25.4 lbs. . . . 48" HIGH MODEL 99 8000714 – Wt. 27.7 lbs. . . . 60" HIGH MODEL 99 8000715 – Wt. 30.1 lbs. . . .

79 89 99

MOTORCYCLE/ATV LIFT X-TREME JACK

• Lifts front, rear or entire motorcycle or ATV • Can be used on the floor or in conjunction with any motorcycle lift table • Rubber padded frame saddles adjust from 2" to 15" on centre • Min. height w/o frame saddles: 3-1/2", max. height: 16" • Min. height with frame saddles: 6", max height: 18" • Max. cap.: 1,100 lbs. (500 kg) 99 8133910 – Wt. 32.3 lbs.. . . . . . . . . . . . . . . . .

• 48" heavy duty multi-purpose jack • All cast construction • 4,660 lb rated load capacity • 5,000 lb winching and clamping capacity • Load tested to 7,000 lbs at which point safety bolt will shear • Min. lift: 5", max. lift: 38" • Winch-Clamp-Spreader bracket has 7/8" shackle holes and 3/8" chain slot • Attaches at any point on the jack I-Beam • All hardware and winch-clampspreader bracket are zinc coated for rust resistance • Charcoal metallic powder-coat finish 8128167 – Wt. 31.6 . . . . . . . . . . . . . . . . . .

13999

1,500 LB WHEEL DOLLY • Remove or install truck, tractor, and heavy equipment wheel assemblies • Lift arm length: 26" • Lift arm spread: 25" max., 21" min. • Max. lift height: 6-1/2" • 31"L x 43"W x 34"H 1030012 – Wt. 191.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

34999

1,000 LB MOTORCYCLE LIFT

184

• Foot actuated pump with 8 ton ram • Lifting range: 6-7/8" to 29-1/2" • Removable platform panel for easier service of motorcycle rear wheel • Platform size: 81" x 21-5/8" • Ramp size: 25-1/2" x 21-5/8" 8228215 – Wt. 288.2 lbs. . . . . . . . . . . . . . . .

49999

2 TON LOW PROFILE SHOP CRANE

• Features low profile • Designed for quickly raising a motorcycle with base, quick lift an exposed frame undercarriage for cleaning ram, handle for easy and servicing movement, retracting • Includes rubber pads to prevent slipping and legs for easy storage protect mortorcycle frame • Low profile base ideal when working on • Steel wheels and T-handle for easy movement compact cars and trucks or lowered vehicles • 2 position adjustable height • Lifting range: 8" to 67" 99 • Platform size: 16" x 16" 8002097 – Wt. 231.5 lbs. . . . . . . . . . . . . . . . • Min. height: 4", max. height: 31" 99 8197147 – Wt. 115.8 lbs. . . . . . . . . . . . . . .

329

SHOP CRANES & LIFTS

1,000 LB MOTORCYCLE LIFT

SHOP CRANES & LIFTS

229

2 TON QUICK LIFT SHOP CRANE

• 4 position boom extends from 37.2" to 56.0" • O'all dim.: (folded) 30.0" x 31.1" x 59.5" • O'all dim.: (unfolded) 62.0" x 34.0" x 63.3" • Includes 8 ton quick lift ram with handle • Ram reaches full extension with only 30 pumps • Max. boom height: 1/2 ton - 93.0" 1 ton - 89.0" 1-1/2 ton - 85.0 2 ton - 81.3" 99 8210072 – Wt. 202.8 lbs. . . . . . . . . . . . . . . .

Reinforced 5/16" wall

269

ADJUSTABLE CHAIN SLING

ENGINE LEVELLER

• For lifting motors from cars, trucks, tractors, and boats • Adjustable long and short legs to hold a motor • Max. cap.: at proper angle for installation or removal 1,500 lbs. • Cap.: 2,350 lbs. 99 • For use between 1580133 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . an overhead lifting ENGINE SUPPORT BAR equipment and an unevenly weighted load like an auto engine with transmission intact • Balance point adjusts 12" side to side 1580009 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . . . .

3999

LIFT SLING • 1,100 lb. cap. • Centre bolt adjustment: 14" • Width adjusts from 40" to 63" • Use on FWD vehicles to support powertrain • 1" x 8 ft. when front sub-frame is removed • 2,100 lb. cap. as a vertical hitch, • Allows for unobstructed access to FWD 1,680 lb. cap. as a choker hitch and components, transmission, and bottom of 4,200 lb. cap. as a basket hitch engine 99 8166134 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 1090009 – Wt. 32.8 lbs. . . . . . . . . . . . . . . . . . .

799

185

TROLLEYS & HOISTS

TROLLEYS

2 TON BEAM CLAMP

• Clamped jaws reduce • Ideal for shop, beam stress by applying the garage, farm, and home use load inside the flanged edge • Adjustable to fit various widths of I-beams • Fits beam widths 3" to 8-5/8" Capacity Beam Widths Wt. ITEM PRICE 8006070 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . . Min / Max (lbs.) 1/2 ton 2-1/2" / 6" 15.8 8203648 69.99 TRIPLE GEARED 1 ton 2-1/2" / 8" 30.7 8203655 99.99 CHAIN HOISTS 2 ton 3-1/2" / 8" 43.1 8203663 139.99

4999

LEVER CHAIN HOISTS

• 180° load chain guide • Safety brake • Steel handle rotates 360° • Comes with swivel hooks with safety latch • Raise or lower load by ratchet action of the handle • Freewheel position allows chain to be pulled quickly by hand to a lower position • Not to be used for pulling Min. dist. Ton Max. lift bet. hooks 3/4 10ft. 12-1/4" 1-1/2 10ft. 26"

Wt. (lbs.) ITEM PRICE 18.1 1580016 89.99 28.9 1580017 129.99

1/4 TON LEVER STYLE CHAIN HOIST

• Min. distance between hooks: 10" • Lift height: 59" • Not to be used for pulling 99 8051699 – Wt. 4.7 lbs. . . . . . . .

• Ideal for shop, garage, farm, and home use • Compact • Swivel hooks with safety latch • 10 ft. lift • Not to be used for pulling Cap. Wt. (lbs.) ITEM PRICE 1/2 ton 22.1 1580091* 59.99 1 ton 22.4 1580240 69.99 2 ton 30.4 1580216 99.99 *8 ft. 3" lift.

ROPE HOIST

Wondering how much effort it will take to lift your load? Divide the weight of the load by the number of pulleys in your hoist. Example: To lift a 1,000 lb. load using a hoist containing 7 pulleys, you would have to exert enough effort to move 142.9 lbs.

• 1,000 lb. cap. • 10 ft. lift • Comes with polypropylene rope • Nylon rollers • Cadmium plated roller housing • Not to be used for pulling 1550005 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

ELECTRIC CABLE HOISTS

186

• Perfect for engine repair or loading and unloading heavy items from trucks and trailers • Power up and down • Includes 5 ft. 5" remote • 110 VAC speed Lifting height Lifting wt. (lbs.) Lifting (FPM) (ft.) Cable Wt. Hoist Length Single Double Single Double Single Double (lbs.) ITEM line line line line line line 440 lbs. 40 ft. 220 440 33 16.5 38 18 24.5 8041840 880 lbs. 40 ft. 440 880 33 16.5 38 18 37.6 8041857 1,320 lbs. 40 ft. 660 1,320 33 16.5 38 18 40.5 8107674

PRICE 114.99 159.99 189.99

• Simplifies engine overhauls, holds engine at a convenient height • Head swivels 360° for easy access to any part of the engine Model Cap. (lbs.) Base Ht. Wt. (lbs.) 3 Wheel 750 32-1/2" x 30" 39" 44.0 A 4 Wheel H-Style 1,000 34" x 30" 36" 49.8 B 4 Wheel U-Style 1,250 34" x 33" 35" 72.6 C 2,000 35" x 34" 35" 101.5 D 5 Wheel U-Style Folding

ITEM 4272506 4270666 4279964 4270198

PRICE 59.99 69.99 89.99 129.99

1,000 LB ENGINE DOLLY

ENGINE STANDS & ROLLER SEATS

ENGINE STANDS

• For storing, transporting and engine maintenance • Universal design works with most automotive engines • O’all dim. 39" x 4.7" x 4.7" • 4 tie down points 99 8127821 – Wt. 26.5 lbs. . . . . . . . . . . . . . . . . . .

ROLLER SEATS

E E) ROLLER SEAT • 300 lb. cap. • Metal frame with padded seat • 14" high • Divided base tray measures: 14" x 14" 4270216 – Wt. 10.3 lbs. . . . . . . . . . . . . . . . . F) PNEUMATIC ROLLER SEAT • 300 lb. cap. • Min. height: 15" • Max. height: 20" • Seat dia.: 12" • Pneumatic shock height adjustment 4270215 – Wt. 14.4 lbs. . . . . . . . . . . . . . . .

3499

G) DELUXE ROLLER SEAT • 250 lb. cap. • Min. seat height: 12", max: 15" 99 • Divided base tool tray 8096752 – Wt. 16.5 lbs. . . . . . . . . . . . . . . . .

4999

187

OIL DRAINS & EXTRACTORS

OIL DRAINING

A) FLUID EVACUATOR • 7.3 litre (2 US gal.) capacity provides a clean, fast and simple way to evacuate a wide range of fluids • Includes 4 ft. of flexible hose and 2 dipstick tubes for engine oil removal • Automatic shut-off valve prevents overfilling • Use to remove engine oil, transmission fluid, gear oil, coolant and brake fluid 99 8051633 – Wt. 7.1 lbs. . . . . . . . . . . . . . . . . . . . B) GRAVITY FED OIL DRAIN DOLLY • 19 litre (5 US gal.) • Min. height: 42" • Extended max. height: 68" • Easy thumbscrew adjustment • Heavy duty, impact-resistant polypropylene 14" dia. funnel • 1-1/2" pour spout 99 8018708 – Wt. 30.2 lbs. . . . . . . . . . . . . . . . . . . C) PORTABLE OIL DRAIN • Cap.: 65 litres (17 US gal.) • Swivel front wheel casters with grab handle for easy under vehicle positioning • 2 baffles, metal grating, and continuous side splash guards prevent oil spillage • Ideal for trucks, RVs, and heavy equipment 99 8035529 – Wt. 39.9 lbs. . . . . . . . . . . . . . . . .

A B

139

OIL DRAIN

188

• Cap.: 75 litre (21 US gal) • Suitable for draining waste oil from engines, transmissions, differentials and gear boxes • 20" x 12" drain funnel adjusts from a min. height of 49" to a max. height of 69" • 132" drain hose 8171100 – Wt. 56.1 lbs. . . . . . . . . . . . . . . . .

AIR OPERATED OIL EXTRACTOR

• Cap.: 22 litre (6 US gal.) • Extract used oil and other fluids from cars and trucks, boats, motorcycles, ATVs plus lawn and garden equipment • Includes 6 quick-disconnect suction probes to allow for use on most vehicles • Tank equipped with oil level gauge • Extracts 0.5 GPM (2 litres/min.) • Operating air pressure 100 to 115 PSI 99 99 • 1/4" NPT air inlet 8007161 – Wt. 35.2 lbs. . . . . . . . . . . . . . . . .

219

179

CREEPERS

CREEPERS C B

D A

A) FOLDING CREEPER • 450 lb. cap. • 6 casters on metal frame with padded cushion • 3-position head rest • O’all dim.: 40" x 16-1/2" x 3-3/4" 99 4270142 – Wt. 17.1 lbs. . . . . . . . . . . . . . . . . . .

B) LOW PROFILE CREEPER • 300 lb. cap. • 6 casters on oil and solvent resistant poly frame • Foam padded headrest • O’all dim.: 40-1/2" x 19-1/4" x 4" 99 8039008 – Wt. 14.2 lbs. . . . . . . . . . . . . . . . . . .

C) MECHANICS’ FOLDING CREEPER • 300 lb. cap. • Frame supported by 7 casters • 2 positions (flat or as a seat) • O’all dim.: 48" x 18-1/2" x 4" 4270116 – Wt. 26.4 lbs. . . . . . . . . . . . . . . . . . .

5999

D) REPLACEMENT CASTER Fits A) and C). 8003401 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . 3.99

CARTS & DOLLIES HAND CARTS

Style E Flip Down Toe Heavy Duty F Appliance G * Pneumatic

Cap. Height (lbs.) 550 50" 800 49" 550 60"

E Toe Plate 14" x 8" 17-1/4" x 10" 24-3/4" x 3-1/2"

ITEM

PRICE

8095911 8095929 8095937

54.99 69.99 99.99

VEHICLE DOLLIES

2 PC CORNER DOLLY

• 250 lb. cap. • 2" thermoplastic rubber wheels • 10-1/2" x 10-1/2" x 3-1/2" high 8097032 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . . .

Wt. (lbs.) 10" x 2.75" 40.0 10" x 3.5"* 31.9 8" x 2" 46.0 Wheels

• Ideal for moving disabled vehicles • O’all dim.: 15-1/2" x 23-1/2" 99 • Max. cap.: 1,000 lbs. (454 kg) each 1090019 – Wt. 47.7 lbs. . . . . . . . . . . . . . . .

8999/pr.

189

BOOSTER CABLES & BATTERY TESTERS

PLATFORM DOLLIES O’all dim.: 30" x 18" 8182347 – 660 lb. cap., 3" casters Wt. 9.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8182461 – 1,000 lb. cap., 4" casters Wt. 14.1 lb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999 3999

BOOSTER CABLES REPLACEMENT CLAMPS C

A PARROT JAW

Amp Colour Wt. (lbs.) 10 Red & Black 0.1 500 Red 0.4 D 500 Black 0.4 C

ITEM 8000756 4272621 4272639

PRICE 0.99/pr. 3.49/ea. 3.49/ea.

BATTERY TESTER

These heavy duty cables feature premium all rubber construction. They remain flexible to -70°C (-95°F). 400 & 500 AMP: Heavy duty sidekick clamp with extended jaw to easily grab side post terminals as well as top post. 600 AMP: Parrot jaw clamps with heavy duty spring to ensure a tight grip on battery terminals. Wt. Gauge Length Amps (lbs.) ITEM PRICE 6 12 ft. 400 4.6 8007071 34.99 A 4 16 ft. 500 7.3 8036873 69.99 2 20 ft. 600 12.3 8036881 99.99 B 1 25 ft. 600 17.6 8040214 159.99

• Starter test feature and charging system tester • Make a complete evaluation of any 6 or 12 volt battery in 30 seconds • Performs present voltage test, puts 10 sec. load on battery, checks charge and tests charging circuit while engine is running 99 8016416 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . .

BATTERY TESTERS

E E) BATTERY TESTER • Tests batteries, starters and charging systems • Suitable for 6 or 12V systems 99 4230019 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . F) DIGITAL BATTERY TESTER • Starter test feature and charging system tester • Make a complete evaluation of any 12V battery in 30 seconds • Performs present V test, puts 10 sec. load on battery, checks charge and tests charging circuit while engine is running • Convenient handle with clamp holders 99 8104903 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . .

190

G) 500 AMP CARBON BATTERY TESTER • Subjects up to 500 amps of load to test 12V batteries, alternators, regulators and starters • Tests batteries up to 160 amp-hrs./1,000 cranking amps • Colour-coded separate voltmeter and ammeter • Colour-coded temperature compensation pass/fail chart 99 8002827 – Wt. 9.4 lbs. . . . . . . . . . . . . . . . . . . . .

BATTERY CHARGERS

A) 1.5 AMP AUTOMATIC TRICKLE CHARGER • Ideal for overnight warming of motorcycle, ATV, snowmobile, and small garden tractor batteries to ensure cold weather starts • Unique float-mode monitoring system ideal for maintaining batteries kept in storage • 6/12 volt • Reverse polarity protection • Charges in 2 to 12 hours 99 8206492 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . B) 12 VOLT AUTOMATIC CHARGER/BOOSTER • 2 amp trickle charge, 10 amp fast charge, 50 amp boost • Fully automatic, will not overcharge batteries 99 4270252 – Wt. 10.6 lbs. . . . . . . . . . . . . . . . . . . C) 6/12 VOLT MANUAL CHARGER/BOOSTER • 10 amp charge, 30 amp fast charge, 200 amp boost • High output with portability 99 4270076 – Wt. 24.9 lbs. . . . . . . . . . . . . . . . . 6/12 VOLT MANUAL WHEEL-STYLE CHARGER/BOOSTER • Built-in ammeter and battery load tester • Multi-function battery volt analyzer checks charging & starting system • Timer with shut-off and “hold” position for continuous charging • Cooling fan for longer life D) 2/10/40/200 AMP • 2 amp trickle charge, 10 amp medium charge, 40 amp fast charge, 200 amp boost • 6 and 12 volt 99 4270245 – Wt. 36.6 lbs. . . . . . . . . . . . . . . . . E) 30/60/300 AMP • 30 amp charge, 60 amp fast charge • 300 amp 12V boost, 200 amp 6V boost 99 4270077 – Wt. 50.6 lbs. . . . . . . . . . . . . . . . .

169

199 349

AUTOMATIC BATTERY CHARGERS • Detects current battery charge level and automatically adjusts output • Output of battery charger will decrease as charge level of battery increases • Will not over charge battery or spark when clamps touch F) 10 AMP CHARGER 2/6.5/10 amp charger, 2 amp slow, 6.5 amp fast, 10 amp peak. 8155525 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) 75 AMP CHARGER/BOOSTER • 2/6/12/75 amp charger/booster • 2 amp trickle, 6 and 12 amp medium charge • 75 amp, 12 volt boost • Charge status indicator lights 8091704 – Wt. 13.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H) 100 AMP CHARGER/BOOSTER • 2/15/100 amp charger/booster • 2 amp trickle, 15 amp fast charge • 100 amp, 12V boost • Charge status indicator lights 8148405 – Wt. 17.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

7999 H

9999

191

CARTS & SCAFFOLD

FOLD UP PLATFORM CARTS • Rigid front casters • Swivel rear casters • Handle folds down for easy storage 330 LB CAPACITY • Platform: 29" x 19" • 4" casters 8095945 – Wt. 21.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 660 LB CAPACITY • Platform: 35" x 24" • 5" casters 8095952 – Wt. 38.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

4999 8999

SCISSOR LIFT CART • 660 lb. cap. • Max. height: 35" • Min. height: 11-1/4" • Platform measures: 19-1/2" x 32" • 5" dia. casters • Locking rear swivel casters • Foot activated pump • Handle folds flat for easier storage 8017549 – 186.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

28999

2-1/2 TON PALLET PULLER

4230078 – Wt. 17.2 lbs. . . . . . . . . . . . . . . . . . .

BARREL DOLLIES

4999

CHECK OUT OUR STORES NATIONWIDE FOR OUR FULL SELECTION OF TROLLEYS, DOLLIES, AND CARTS!

Barrel Barrel Wt. Capacity Volume Dia. (lbs.) ITEM PRICE 728 lbs.

60 litres (16 US gal.)

880 lbs. 205 litres

(54 US gal.)

16" 13.7 8182297 34.99 24" 17.6 8182313 44.99

SCAFFOLD

1,000 LB CAPACITY HEAVY DUTY SCAFFOLDING • 65"L x 29"W x 74"H • Working platform height adjustable from 28" to 71" • Designed for quick assembly/disassembly for easy setup or storage • Durable steel construction • 5" swivel casters with locking brakes 8077760 – Wt. 140.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FIXED PIPE JOINT COUPLER Carbon steel. 8177925 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . .

192

899

24999

ADJUSTABLE PIPE JOINT COUPLER Carbon steel. 8177933 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . .

Can be used for pipe up to 2" dia. • Ideal for joining scaffold together

999 192

PARTS WASHERS

PARTS WASHERS 20 GALLON PARTS WASHER • 20 gallon tub with 12 gallon working cap. • Includes 120V pump, max. cap.: 132 GPH (2.2 GPM) • Safety link in lid hinge releases and automatically closes lid if fire starts • Includes parts tray, parts box and steel flex nozzle 99 8022392 – Wt. 57.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24" REPLACEMENT FLEXIBLE NOZZLE 4218731 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.99

179

5 GALLON PARTS WASHER REPLACEMENT PUMP • 5 gallon tub with 3.5 gallon working capacity • Includes pump, tray, and steel flex nozzle • Safety link in lid hinge releases and automatically closes lid if fire starts • O’all dim.: 17" x 13" x 8-3/4" 8003630 – Wt. 16.7 lbs. . . . . . . . . . . . . . . . . .

• Replacement pump for parts washer 8022392 • Max. capacity: 132 GPH (2.2 GPM) 8022891 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

6999 CONCENTRATED LOW PH CLEANER/ DEGREASER

PARTS WASHER PUMP

• 120V epoxy encapsulated submersible pump • O’all dim.: 3" x 4-1/2" x 4" • Pumps 240 GPH (4 GPM) 4216107 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

2999

PARTS WASHING BRUSHES A

• Solvent free, non-butyl, low foaming concentrate fortified with an added corrosion inhibitor • Ideal for use in parts washers, pressure washers and 99 automatic scrubbers • Cleans parts without damaging aluminum or steel parts washing equipment • Low ph formula will not harm washer pump seals • Dilute 1:20 • Produces up to 80 gallons of parts washer cleaning solution 99 8098055 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . . . . .

SOLVENT B

A) 8" PARTS WASHING BRUSH • 1" dia. • 100% pure nylon bristles 49 2917151 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) HUB CLEANING BRUSH Ideal for cleaning hubs when repacking bearings, inside tubes, and other hard to reach places. 99 8044699 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . C) 8-1/2" PARTS WASHING BRUSH SET 2 flow through brushes fit 1/2" I.D. hose. 99 4273488 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . /pr.

2 2

• Low odour formula • Ideal for removing oil and grease • Excellent automotive/agricultural/industrial parts cleaner • Thinner for oil base paints and stains 4 LITRES 8057143 – Wt. 7.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 20 LITRES 8047490 – Wt. 37.8 lbs. . . . . . . . . . . . . . . . . . .

999 4999

193

BANDSAWS

BANDSAW BLADES BANDSAW BLADES CARBON STEEL FLEXBACK BLADES • Low cost • Reduces operating expense in mild steels • Good for pipe, tubing, solids, and all mild steels • 14 teeth/in. Wt. Size (lbs.) ITEM PRICE 64-1/2"x 1/2" x 0.025" 0.2 3460748 8.99 68" x 1/2" x 0.025" 0.2 3460024 12.99 93" x 3/4" x 0.032" 0.6 3460022 14.99

HEAVY DUTY MATRIX BIMETAL BLADES • High resistance to heat and wear • High shock resistance • Variable pitch reduces vibration • Long life and faster cutting • Good for cutting any machinable metal, conduit, angle iron, rebar, stainless steel, etc. Teeth Wt. Size /In. (lbs.) ITEM PRICE 64-1/2" x 1/2" x 0.025" 14 0.2 3462280 19.99 68"x 1/2" x 0.025"* 10/14 0.2 3460048 34.99 93" x 3/4" x 0.035"* 10/14 0.7 3460047 39.99 97-1/2" x 1" x 0.035" 8/12 1.0 8002192 49.99 *Variable pitch

CUTTING OIL/COOLANT

• Water soluble • Protects material from rust and corrosion • Suitable for machining, cutting, tapping, and as a coolant for bandsaws • 4 litres 99 8034012 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NOTE: OIL CANNOT BE SHIPPED.

SHOP PRESSES 50 TON INDUSTRIAL HYDRAULIC SHOP PRESS

Moveable 6" Bore Ram

Multiple Bed Heights

194

Features: • User friendly valve can be mounted on either side of frame • Self-contained Power Pack can be easily detached for use in other applications • Easy to read hydraulic pressure gauge Specifications: • Max. working pressure: 3,600 PSI • Ram stroke: 5-1/2" • Working area (width): 34" • Ram to bed distance: 5-3/4" to 37-3/4" at 4" increments • Bed width: 11-3/4" • Ram horizontal travel: 26-1/2" • Ram speed: 32"/min. (no load), 8"/min. at working pressure • 2 HP continuous duty 208/230V motor • O’all dim.: 72"H x 53"W 99 3460068 – Wt. 525.0 lbs. . . . . . . .

2899

SHOP PRESSES

30 TON HYDRAULIC SHOP PRESS

4-1/2" Bore Ram

Specifications: • Max. working pressure: 3,800 PSI • Ram stroke: 5-1/2" • 3 position cylinder • Working area (width): 25" • Ram to bed distance: 1-1/2" to 22-1/2" at 3" increments • Bed width: 10" • Ram speed: 23"/min. extending, 27"/min. retracting • Full load duty: 1 minute on, 9 minutes off • Electric motor: 2 HP, 3,450 RPM, 208/230 volts • Intermittent duty motor • O’all dim.: 70"H x 43"W 99 3460052 – Wt. 375.0 lbs. . . . . . . . . . . . .

Multiple Bed Heights

1899

20 TON HEAVY DUTY SHOP PRESS FRAME

Use with our Powerfist hydraulic bottle jacks on page 181. For easier and quicker operation our Powerfist 12 Ton 8003605 or 20 Ton 8003606 air/hydraulic jacks from page 181 can be used. Specifications: • Working range: 2-1/4" to 30-1/4" • Width between uprights: 24" • 7 bed positions at 4-3/4" increments • Bed width: 9-1/8" • O’all dim.: 60"H x 27-1/2"W 99 3460067 – Wt. 204.6 lbs. . . . . . . . . . . . . . .

349

A) REPLACEMENT SPRING 1-3/4" dia. x 8-3/4" long. 3461449 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . 14.99/ea. B) REPLACEMENT END CAP 3460080 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . 9.99/ea.

195

SHOP PRESSES

20 TON SHOP PRESS

• Working range 0 to 36" • Remove and install bearings, U-joints, ball joints, etc. • Table raises and lowers easily for best working distance • 20 ton bottle jack included, all steel frame 99 8150948 – Wt. 181.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

279

BED PLATES

• For shop presses • Sold individually • O’all dim.: 6" x 11-1/2" x 1-1/4" 3460016 – Wt. 24.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT END CAPS

ARBOR PRESS

• For heavy duty production and assembly work • Presses and removes precision bearings • Cast iron body, large base, slotted table plate Working O’all Wt. surface height (lbs.) ITEM PRICE 1 ton 4-1/2" 4-3/4" dia. 12-1/2" 34.0 3460011 49.99 Size Stroke

5999/ea.

Replacement for worn endcaps or weld to your own dies. Fits 30 ton press #3460052. 1250029 – Wt. 0.9 lbs. . . . . . . . . 24.99 Fits 50 ton press #3460068. 1251388 – Wt. 1.0 lbs. . . . . . . . . 19.99 Replacement punch and dies are available from our Winnipeg Parts Department. See your nearest Princess Auto Store for details, or call our National Call Centre at 1-800-665-8685

PUNCH & DIE KIT FOR 30 OR 50 TON PRESSES • 30 and 50 ton press can punch up to 1/2" thick metal with 21/32" punch • 4 standard ironworker punches and dies: 9/32" (1/4"), 13/32" (3/8"), 17/32" (1/2"), and 21/32" (5/8") (brackets denote size of bolt or pin) • Die holder bed plate, adapter, punch holder, and stripper plate are zinc plated • Mounting instructions included 99 3460085 – Wt. 45.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

DETERMINING TONNAGE REQUIRED FOR PUNCHING MILD STEEL

196

(For materials with a tensile strength of approximately 65,000 PSI) For other materials, multiply your result ROUND HOLES with these modifiers: Punch x Material x 80 = Tons of Aluminum: 0.38 Steel (50% carbon): 1.50 Diameter Thickness Pressure Brass: 0.70 Stainless steel (303): 1.50 Copper: 0.56 Steel (Cold drawn): 1.20 Steel (Mild): 1.00

196

BENCH TOP METAL BRAKES

• Designed to make a variety of bends on flat or solid, round or square steel • Capacity for hot rolled mild steel: 3/8" x 2" flat stock, 3/8" solid, square, or round • Includes 7 different round dies; (1" to 3" in Makes up to 90° bends. diameter) for making different radius curved bends 18" CAPACITY • Depth control rod for quick bend replication • Bend sheet metal up to 18-gauge and 18" wide • Designed for portability; can be mounted in any • Lightweight aluminum construction 99 bench vise or attached to your own custom base 8039455 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . using included brackets 99 30" CAPACITY 8000447 – Wt. 20.8 lbs. . . . . . . . . . . . . . . . . . . • Steel construction METAL BENDER DVD • Bends material up to 17-gauge and 30" wide Instructional video for 8000447 metal bender. 99 • O’all dim.: 31-1/2" x 6" x 2-7/8" 99 8089468 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 8008201 – Wt. 30.9 lbs. . . . . . . . . . . . . . . . . . .

PIPE & METAL BENDERS

METAL BENDER

PIPE & METAL BENDERS

HYDRAULIC PIPE BENDERS 12 TON BENDER • Includes dies for 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" pipe • Max. pipe thickness: 12 gauge (0.118"/3 mm) • O’all dim.: 21-1/2"H x 24"W x 6"D • Makes up to 90° bends 99 8068017 – Wt. 87.2 lbs. . . . . . . . . . . . . . . . . REPLACEMENT DIES REPLACEMENT ROLLERS 8081796 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . 14.99/pair For benders 8068017 and 8068033. Size Wt. (lbs.) ITEM 16 TON BENDER • Includes dies for 1/2", 3/4", 1", 1-1/4", 1-1/2", 1/2" 1.6 8081739 2", 2-1/2", and 3" pipe 3/4" 2.2 8081747 • Max. pipe thickness: 8 gauge (0.176"/4.5 mm) 1" 2.8 8081754 • O’all dim.: 23-1/4"H x 30"W x 7"D 1-1/4" 3.8 8081762 • Makes up to 90° bends 1-1/2" 5.0 8081770 99 8068033 – Wt. 149.6 lbs. . . . . . . . . . . . . . . . 2" 7.4 8081788 2-1/2" 10.6 8081812 REPLACEMENT ROLLERS 3" 13.4 8081820 8081838 – Wt. 7.5 lbs. . . . . . . . . . . . . . . . . 19.99/pair

169

279

PRICE 8.99 9.99 11.99 14.99 19.99 29.99 39.99 49.99

UNIVERSAL METAL BENDERS B C A

B) PEDESTAL MOUNT O’all height: 38-1/2". 99 2910165 – Wt. 60.2 lbs. . . . . . . . . . . . . . . . . • Designed to make a variety of bends C) BENCH MOUNT on flat, round or square steel • Bend angles up to 120° • Includes 7 dies; 1" to 3" for making different • Change radius by using different die plates radius curved bends • Cold steel cap.: 4" x 3/16" flat, 5/8" x 5/8" • Capacity for hot rolled mild steel: 5/16" x 2" square and 11/16" dia. round flat stock and 5/8" solid square or round • Hot steel cap.: 4" x 9/16" flat, 1" x 1" square, A) BENCH MOUNT and 1" dia. round 99 99 2919001 – Wt. 42.8 lbs. . . . . . . . . . . . . . . . . . . 2910280 – Wt. 73.3 lbs. . . . . . . . . . . . . . . . .

119

219

197

PIPE & METAL BENDERS/DRILL PRESS

36" METAL BRAKE

• Max. width of sheet 36" • Sheet metal cap.: 1/16" (1.6 mm)/16-gauge • Max. beam lift: 3/4" (19 mm) • O’all dimensions 44" x 40" x 24" 8043690 – Wt. 173.0 lbs. . . . . . . . . . . . . . . .

29999

12" METAL SHEAR

• Cut metal plate, rod and flat steel • Can be bolted to workbench • Steel frame with high carbon steel blade • Max cut thickness: 1/4" (6 mm) • Max cut flat steel: 2-3/4" x 1/4" (70 mm x 6 mm) • Max cut rod steel: 7/16" (11 mm) • Max cut width: 12" (305 mm) 8096000 – Wt. 68.2 lbs. . . . . . . . . . . . . . . . .

METAL PLANETARY RING ROLLER

13999

• Forms rings from hot rolled flat metal stock for ornamental iron work and more • Capacity of metal up to 3/16" x 1" flat, and 1/4" round • Creates rings min. 2-1/4" diameter • 13-1/3" long iron handle • Black anodized steel body 99 8196545 – Wt. 12.3 lbs. . . . . . . . . . . . . . .

DRILL PRESS & COMPONENTS 16 SPEED DRILL PRESS See page 200 for drill press vises. • Motor: 3/4 HP, rated at 6.6 amps • 16 speeds (210 to 3,340 RPM) • Chuck: 5/8" • Column dia.: 3" • Swing: 13" • 11-1/2" dia. round table • Removable safety switch • Spindle taper MT 2 • O’all height: 63" 3462090 – Wt. 133.8 lbs. . . . . . . . . . . . . . . .

24999

DRILL PRESS CHUCKS WITH KEY DRILL PRESS CLAMP

198

KEY – FOR 5/8" CHUCK 3460073 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 1/2" CAPACITY – JT-33 TAPER 3460034 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . 5/8" CAPACITY – JT-33 TAPER 3460035 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . .

199 1299 1999

• 9" locking clamp attaches to drill press table • 3" throat depth 2920682 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

1299

DRILL BITS & ACCESSORIES

SILVER & DEMING DRILL SETS • 1/2" shank • Rockwell hardness: 62 • Includes wood case 5 PC SET Sizes: 9/16", 5/8", 3/4", 7/8", and 1". 3400207 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . 8 PC SET Sizes: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1". 3400215 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . TITANIUM COATED Dissipates heat quickly for a fast, smooth cut, and longer life. 5 PC SET Sizes: 9/16", 5/8", 3/4", 7/8", and 1". 3410934 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . 8 PC SET Sizes: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1". 3410935 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . .

3499 4999

4999 6999

INDIVIDUAL SILVER & DEMING DRILL BITS

• 1/2" shank • Rockwell hardness: 62 Size Wt. (lbs.) ITEM 9/16" 0.3 3410867 5/8" 0.3 3410883 11/16" 0.4 3410990 3/4" 0.4 3411030 13/16" 0.5 3411063 7/8" 0.5 3411253 1" 0.6 3411303

HIGH SPEED CUTTING OIL NOT FOR USE AS A BANDSAW COOLANT!

PRICE 5.99 6.99 7.99 8.99 10.99 12.99 14.99

• Heavy duty, sulfurized-chlorinated naphthenic base oil outperforms standard water or mineral based formulations • Provides extreme pressure lubrication and high temperature stability • Contains anti-weld and wetting agents • Ideal for broaching, milling, tapping, and drilling • 3.78 litre 99 6420084 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

METAL LATHE

5 PC LATHE CUTTING BIT SET • Carbide tips • Bar turning tool • Straight finishing tool • Right hand cranked knife tool • Left hand cranked knife tool • Parting tool 8120982 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . .

• 1/3 HP variable speed motor • 7" x 12" mini metal lathe • Swing over bed: 7" (180 mm) • Distance between centres: 12" (300 mm) • Spindle taper: MT#3 • Spindle bore: 3/4" (20 mm) • 100 - 2,500 RPM variable spindle speed • Tailstock taper: MT#2 • Threading range: SAE 12-52 TPI in 18 steps metric 0.4-2.0 mm in 10 steps • 3" chuck with reversible jaws 99 8120974 – Wt. 88.2 lbs. . . . . . . . . . . . . . . . .

699

QUICK CHANGE CUTTER REST

8144636 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . .

2999

6 PC LATHE CUTTING BIT SET • Carbide tips • Cranked turning/facing tool • Cranked facing tool • Cranked knife tool • Rough boring tool • Inside corner tool • Recessing tool 8120990 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . .

3499

2 PC CUT-OFF TOOL SET

6999

Includes 2 pc cutter, cut-off tool and hex key. 8144644 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

4999

199

METAL WORKING ACCESSORIES/VISES

STEADY REST • Supports workpieces while grooving, threading and knurling • Prevent chatter marks when turning long workpieces • Rugged cast iron bed • For use with metal lathe 8120974 8144610 – Wt. 2.9 lbs.. . . . . . . . . . . . . . . . . . . .

FOLLOW REST

• Provides a moving support for the work behind the cutting tool • Rugged cast iron base • For use with metal lathe 8120974 99 8144628 – Wt. 1.5 lbs . . . . . . . . . . . . . . . . . . . .

MILLING MACHINE VICE

MILLING MACHINE

• Heavy duty cast iron body and base for added stability • Includes drill & chuck key, shaft and chuck key assembly and wrenches • Two speed ranges: 0 to 1,100 RPM (low) 0 to 2,500 RPM (high) • Spindle taper : MT#3 with JT33 chuck taper • Spindle stroke : 7" • End mill capacity: 1/2" • Face mill capacity: 1" • Table slot width 1/2" 8145096 – Wt. 151.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

2999

• Heavy duty cast body • Precise swivel base with full markings • For use with milling machine 8145096 • Jaw width: 2" • Jaw opening: 2-3/16" 99 8145104 – Wt. 6.7 lbs. . . . . . . . . . .

8 PC MILL END

99999

• For use with 8145096 • 1/8", 3/16", 1/4", 3/8", 5/16", 1/2", 9/16", and 5/8" 99 8145112 – Wt. 0.8 lbs. . . . . . . . . .

58 PC CLAMPING SET • 1/2" T slot size • Includes: 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 Step clamps, 12 step blocks, 24 studs; 4 each of: 3" to 8" length • Ideal accessory for milling machine 8145096 99 8199283 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANVILS & VISES DRILL PRESS VISES Will also fit standard power tool tables and bases. Features: • Hardened jaws • Flanged base • Smooth operating screw and sturdy construction Size Jaw Width Max. Jaw Opening Base Length Base Width 2" 2-1/2" 2-1/4" 5-1/4" 5-1/4" 3" 3" 2-3/4" 6-3/4" 5-3/4" 4" 4" 3-5/8" 7-1/2" 6-1/2" 5" 5" 5-1/4" 9-3/4" 8" 6" 6" 5-3/4" 10-3/8" 8-3/4"

Wt. (lbs.) 2.6 4.4 5.7 9.1 12.0

2-WAY CROSS SLIDE VISES

200

• Use with milling machines or drill presses • Hardened jaws and machined handles • Object clamped in the vise can be easily moved in 2 directions of Jaw Long. Cross Wt. Size Width ITEM Jaws Opening Travel Travel (lbs.) 3" 3-1/4" 3" 3-1/4" 3-1/4" 15.3 8128134 4" 4" 4" 4" 4" 17.9 8128142 6" 6" 6" 6" 6" 35.1 8128159

PRICE 39.99 49.99 69.99

ITEM 3431814 3430204 3430212 3430220 3430238

PRICE 9.99 10.99 15.99 21.99 26.99

• Swivel vise can be attached to a table or bench with built-in clamp • Jaw width: 2-3/8" • Jaw opening: 2-3/4" 3460030 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . .

• Jaws swivel 360° and lock in any position • Mounting base swivels and locks in any position MECHANICS VISES • Anvil on vise body Mechanic's Pipe Jaw Wt. Width Jaws Max. Max. (lbs) ITEM PRICE With anvil. Opening Opening FIXED BASE 4" 4" 3-1/2" 39.1 8127276 54.99 Size Wt. (lbs.) ITEM 5" 5" 4-1/2" 48.6 8127284 69.99 4" 22.3 8085722 5" 29.5 8077562 6" 44.5 8085748 3-1/2" SWIVEL BENCH VISE 8" 70.0 8085755 SWIVEL BASE 4" 24.5 8085672 5" 34.0 8085698 6" 51.1 8085706 8" 78.6 8085714 • Base swivels 210° • Jaw opening: 3-1/2" max 8127268 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . . .

1999

ANVILS

1599

PRICE 49.99 54.99 74.99 109.99 49.99 59.99 79.99 129.99

12" BENCH MOUNT ROLLER

• 2" x 11-3/4" roller • 130 lb. cap. 8003466 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . .

ANVILS & VISES/ROLLER STANDS

TABLE VISE

2-WAY MULTI-PURPOSE VISES

1199

6 PC ROLLER BALL SET A

Cast steel. Wt. (lbs.) ITEM PRICE • Max. cap.: 55 lbs./ball 9"L x 2"W x 4"H 7.8 3460045 14.99 • 5/8" dia. ball with mounting screws A B 11-1/4"L x 3-3/4"W x 6"H 24.1 3460028 39.99 8006882 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . O’all dim.

1499

ROLLER STANDS

C ANGLED

C) ADJUSTABLE ROLLER STAND • Ideal for use with pipe or other round stock • Dual rollers are 6" x 1-3/8" each • Height adjusts from 28" to 49" • Max. cap. 100 lbs. 8049202 – Wt. 6.0 lbs. . . . . . . . . . . . . . . D) FOLDING ROLLER STAND • 2" x 11-3/4" polished steel roller • Height adjusts from 27-1/2" to 43" • Folds flat for easy storage • Max. cap.: 130 lbs. 8044653 – Wt. 8.9 lbs. . . . . . . . . . . . . . .

1999

2899

No sale is final until you're satisfied.

201

GASKET MAKERS & SEALANTS

For nearly 100 years, Permatex has supplied innovative products for automotive enthusiasts, professionals, and OEMs.

GASKET MAKERS ULTRA SERIES • Sensor-safe & non-corrosive • Will not contaminate oxygen sensors or corrode other electronic engine components • Long term durability with superior adhesion to oily surfaces • Resists powertrain fluids including engine oil, transmission fluid, gear lube and coolants • Eliminates the need for pre-formed, pre-cut, paper, rubber or cork gaskets

• All-purpose RTV silicone gasket maker • Sensor safe • Resists auto and shop fluids • Waterproof seal resists cracking, shrinking and migrating • Use for sealing, bonding, insulating, caulking, making gaskets and coating pre-cut gaskets • 80 ml tube

ULTRA BLACK GASKET MAKER • Temperature range: -54° to 330°C (-65° to 625°F) • Approved by Ford and GM • 80 ml tube 6400002 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . 300 ml cartridge 8116816 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

6 1599

ULTRA COPPER GASKET MAKER • Designed for high operating temp. applications • Temperature range: -60° to 370°C (-75° to 700°F) • 80 ml tube 6400004 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

BLACK GASKET MAKER Temperature range: -54° to 230°C (-65° to 450°F). 8116857 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

499

HI TEMP RED GASKET MAKER Temperature range: -54° to 343°C (-65° to 650°F). 8116865 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

499

BLUE RTV GASKET MAKER Temperature range: -54° to 260°C (-65° to 500°F). 6400006 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

499

699

• All-purpose RTV silicone adhesive/sealant • Use for sealing, bonding, insulating and caulking • Flexible, durable and waterproof BLACK RTV SILICONE ADHESIVE/ SEALANT • Temperature range: -62° to 260°C (-80° to 450°F) • 80 ml tube 99 8116832 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . CLEAR RTV SILICONE ADHESIVE/ SEALANT • Temperature range: -60° to 204°C (-75° to 400°F) • 80 mi tube 99 8116840 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . .

4 4

HIGH TEMP RED SILICONE ADHESIVE/ SEALANT • Temperature range: -60° to 340°C (-75° to 650°F) • 80 ml tube 49 6400030 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

PIT CREW’S SEALANT/ADHESIVE • Repairs tears in seats and floor mats, secures loose trim, seals small tears in hoses • Powerful bond with no harmful fumes • Non toxic, non flammable and provides a permanent, waterproof seal • Works on metal, fibreglass, glass, leather, plastic, vinyl, rubber, wood, ceramic & fabric • 59 ml tube 49 8193260 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

MEDIUM STRENGTH BLUE GEL THREAD LOCKER

• Gel formula ideal for vertical or overhead applications • Twist applicator • General purpose medium strength blue allows fasteners to be removed with hand tools and normal effort • For fasteners 1/4" to 1" • 10 g 99 8051567 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

A) HIGH TEMPERATURE THREAD SEALANT B • Locks and seals threaded fittings • Resists leakage, shop fluids, fuels and gases • Temperature range up to 204°C (400°F) • 50 ml tube 99 6400048 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . .

B) THREAD SEALANT WITH TEFLON • General purpose thread sealant • Resists common auto and shop fluids, fuels and gases • 118 ml brush-top bottle 6400055 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . .

THREAD LOCKERS

SUPERBONDER ADHESIVE

REMOVABLE STRENGTH BLUE THREAD LOCKER • General purpose threadlocker for fasteners 1/4" and larger • Removable with hand tools and normal effort • 6 ml tube 99 6440007 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

• Superior performance general purpose super glue • Fast setting, strong adhesive for bonding most materials • Use on non-porous surfaces • 3 ml tube 6440119 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

PERMANENT STRENGTH RED THREAD LOCKER • For fasteners 3/8" and larger • Extra effort and localized heat may be required for removal • Withstands heavy shock and vibration • 6 ml tube 6440127 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

799

GASKET MAKERS & SEALANTS

THREAD SEALANT

499

COLD WELD BONDING COMPOUND

599

HIGH TEMP/HIGH STRENGTH RED THREAD LOCKER • For fasteners 5/8" and larger • Extra effort and localized heat may be required for removal • Temp. range: -54°C to 232°C (-65°F to 450°F) • 10 ml tube 99 6440008 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . .

• Fast setting 2-part adhesive and filler system • Use as an alternative to welding or brazing cracked or broken metal parts • Can be drilled, machined, filed and painted • 3,000 PSI shear strength • Withstands temperatures up to 174°C (350°F) • 1 oz. tubes 99 6440010 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

POCKET REFERENCE • Over 700 pages of reference information • Includes tables, lists, charts, drawings and formulas on virtually any subject • Especially useful for students, travellers, hobbyists, contractors, engineers, and technicians in nearly every field 8058083 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1399

AUTO POCKET REFERENCE Contains information on tires, trailers and hitches, brake systems, electrical and battery, driving and accident help, safety, tools, basic maintenance and troubleshooting, vehicle maintenance logs, conversion factors, colour maps and more. 99 8058091 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HANDYMAN POCKET REFERENCE • Topics include: carpentry, roofing, rope, pipes, pumps, bolts, lumber, pulleys, gears, welding, tools, electrical, and more • 768 pages 8058109 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1399

203

REPAIR KITS

REARVIEW MIRROR • Permanently bonds rearview mirror button to windshield adhesive kit in minutes • Fast curing • OEM factory service specified • Kit includes alcohol towelette, adhesive, activator, razorblade, sandpaper • Ideal for all glass windshields 99 8161275 – Wt. 0.1 lbs. ......................................................................................

METAL FUEL TANK • For quick, permanent repairs to metal fuel tanks (not for use on plastic tanks) in 30 minutes • Repairs cracks up to 4" long and holes up to 3/8"dia. • Eliminates dangerous welding • Kit includes alcohol towelette, epoxy pouch, epoxy putty, bandage, sandpaper and applicator brush • Ideal for cars, light trucks and commercial vehicles as well as portable metal fuel tanks 99 8161184 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WINDSHIELD • Repairs most types of damaged laminated windshield glass • Repairs bullseyes, star damage and cracks up to 12" in length • No mixing required, fast curing by natural daylight • Kit includes alcohol towelette, adhesive disc, curing strips, pedestal, push pin, razor blade 99 8161242 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PLASTIC TANK • For quick, permanent repairs to plastic tanks (not for use on plastic FUEL tanks) • Repairs cracks up to 4" long and holes up to 3/8" dia. • Repairs fully in 30 min. • Kit includes alcohol towelette, epoxy pouch, epoxy putty, bandage, sandpaper and applicator brush • For use on cars, trucks, boats and RVs, windshield washer tanks, radiator tanks, coolant reservoirs, water and waste tanks 99 8161176 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VINYL & LEATHER • Repairs tears, holes, burns and gouges • Mix/match from 7 different colour choices • Colour match chart and practice vinyl included • Easy-to-follow instructions 8193252 – Wt. 0.3 lbs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

949

LENS RESTORATION

204

• Restores clarity to clouded, pitted and yellowed lenses improving light output and appearance • Use on headlight, marker, parklamp and other plastic lenses • Kit contains lens polish, polishing cloth, sandpaper, 1 pair disposable gloves and instruction sheet 99 8087280 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PAINT

PAINT ANTI-RUST SPRAY PAINT • Interior and exterior rust protection • Can be applied to metal or wood • Ideal for shop equipment such as ramps, stands and jacks, as well as outdoor furniture plus lawn and garden equipment • Gasoline and oil resistant • Quick drying and can be recoated anytime • 340 g Wt. 1.0 lbs.

8057374 – GLOSS BLACK 8057382 – FLAT BLACK 8057408 – GLOSS WHITE 8057424 – RED 8057432 – ALUMINUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FLUORESCENT ORANGE SPRAY PAINT • Fast drying paint that can be used on wood, metal and paper • Ideal for safety markings and warning signs or anywhere high visibility intense colour is needed • 312 g 8072597 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

ALL PURPOSE SPRAY PAINT • Fast drying enamel spray paint suitable for interior or exterior applications • Use on metal or wood, recoat anytime • Non-fading 99 • 340 g

Wt. 1.0 lbs.

8057242 – GREY 8057259 – CLEAR . . . . . . . . . . . . . . . . . . . . . . . . .

HIGH HEAT PAINT

449

SANDABLE SPRAY PRIMER

• Formulated to resist temperatures up to 800°C (1,500°F) • Properly cured, Hi-Temp paint forms a hard lasting finish that resists salt spray and humid conditions • Use on headers, exhaust manifolds, BBQs, wood stoves and other surfaces exposed to high heat • 312 g

• Fast drying enamel primer suitable for interior or exterior applications • Use on metal or wood, recoat anytime • 340 g

Wt. 0.9 lbs.

8057325 – BLACK 8112567 – WHITE 8112559 – ALUMINUM . . . . . . . . . . . . . . . . . . . . .

469

Wt. 1.0 lbs. 49

8057267 – RED OXIDE 8057275 – GREY . . . . . . . . . . . . . . . . . . . . . . . . . .

449

TRACTOR & IMPLEMENT ENAMEL • Matched to the factory colours of leading farm and industrial equipment manufacturers • Durable weather resistant gloss finish is also formulated to protect against rust • Gasoline and oil resistant • 340 g Wt. 1.0 lbs.

8057333 – NEW EQUIPMENT YELLOW 8057341 – HARVESTER RED 8057358 – JOHN DEERE® GREEN 8057366 – FORD® TRACTOR BLUE 8108250 – JOHN DEERE® YELLOW 8108268 – OLD EQUIPMENT YELLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

At your request, PRINCESS AUTO will supply an M.S.D.S. (Material Safety Data Sheet) with your chemical purchases.

599

205

INDUSTRIAL CHEMICALS

A) MOOVIT HI-PERFORMANCE PENETRATING LUBRICANT • Effective from -40°C to 260°C (-40°F to 500°F) • Compatible with vinyl, rubber, and plastic • Displaces moisture • Can be used as: air tool lubricant, lock lubricant, threading or tapping oil, chain and open gear lube, corrosion inhibitor, white grease • 350 g 99 6420008 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . B) LOOBIT™ • Multi-purpose, heavy duty lubricant formulated for use on roller drive chains, wire rope and cables, internal control cables, open gears, exposed bearings, load bearings, load bearing hinges and pivot points, mechanical controls, and more • Leaves a clear protective film impervious to moisture, salt water, most chemicals and gases • 350 g 99 6420014 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

• For use in servicing, rebuilding and maintaining electrical equipment • Ideal for switches, relays, shafts, bearings, armatures, brushes, etc. • Safe for all metals and most plastics • 500 g 99 8180507 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

GRAFFITI REMOVER • Effective in removing vandalism marks while leaving the original surface intact • Just spray on, wait 1-3 minutes, scrub lightly or spray with water • For use on brick, concrete, ceramic tile, aluminum, steel glass, vinyl etc. • Biodegradeable, non flammable, low toxic • 350 g 8180499 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

CONTACT ELECTRICAL CLEANER

STAINLESS STEEL CLEANER • Protects against stains, wear and abrasions on stainless steel, aluminum and plastic laminate • Provides an invisible glove to keep surfaces shiny and impervious to finger prints and scuff marks • Non toxic, food safe • 350 g 8180481 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

A C B D C) AD3000 CORROSION BARRIER FILM • Helps protects vehicle door panels, hood and trunk lids, under carriage, frames, suspension components, machinery and tools from condensation and salt • 350 g 99 6420013 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . D) AD2000 CORROSION INHIBITOR • Prevents and deactivates corrosion on metals, alloys, plastic and rubber • Lubricates to extra fine tolerance and penetrates to leave a clean, non-sticky, moisture repelling residue • 350 g 99 6420010 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

FLUID FILM • Superior lubricant, rust corrosion protection, and long term penetrant • Eats through rust to base metal • Protects against corrosion caused by salt, calcium-chloride, fertilizers, herbicides, and pesticides • Makes excellent undercoating • 333 g 99 6420392 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . .

SILICONE SPRAY • Use on metal and non-metal surfaces including wood, rubber, and vinyl • Stops squeaks, eliminates sticking, waterproofs, and prevents rust and corrosion • Lubricates doors, locks, hinges, drawers, latches, zippers, linkages, and more • Protects items such as golf equipment, boots, skates, lawn equipment, tools and electrical parts such as distributors, ignition wires, and spark plugs • Narrow spray pattern for an even, no-mess application • 311 g 99 8003463 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

206

799

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

1299

PENETRANT SPRAY

• Provides long-lasting lubrication for all metal-to-metal applications • Will not splatter, run, melt, freeze or wash off • Applications include: roller channels, bearings, gears, tools, sliding doors, windows, garage door tracks, hinges, locks, latches, auto seat tracks, trailer rollers, winches, turnbuckles, etc. • 290 g 99 8003464 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Use on pipes, fittings, locks, chains, nuts, bolts and anything else that needs loosening • Helps prevent rust and corrosion • 311 g 8003446 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

LIQUID WRENCH® DRY-LUBE • Lubricate slides, swivels, rollers, hinges, lock cylinders, zippers, chains etc. • Contains PTFE for increased lubricity • Harmless to most fabrics, wood, vinyl, plastics, leather or rubber • 311 g 8032278 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

RUST DISSOLVER GEL • Chemically dissolves rust from all iron and steel surfaces • Brush on to remove years of accumulated rust • Provides flash rust protection • 237 ml 99 6490007 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

INDUSTRIAL CHEMICALS

WHITE LITHIUM GREASE

499

TECH-STEEL

ANTI-SEIZE COMPOUND • For easy assembly and disassembly of metal parts, even parts exposed to high temperatures • Prevents rusting, cold welding, and galvanic corrosion between assembled parts • Temp. range: -54°C to 870°C (-65°F to 1,600°F) • 454 g brush-top bottle 99 6440143 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

• Reinforced epoxy putty bonds to cast iron, ABS, bronze, concrete, and more • Steel hard in 15 minutes • Full cure in 1 hour • 2 oz. 6440018 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

BRUSH ON ELECTRICAL TAPE

GASKET MATERIAL

• Will not crack or unravel like tape • Waterproofs connections, seals out moisture and corrosion • Absorbs vibrations, prevents terminal screws from loosening • Great for hard-to-tape areas • 4 oz. (118 ml) can • Oil, fuel and antifreeze resistant • Use on automotive, lawn, and garden RED equipment, ATVs, motorcycle, etc. applications 8037103 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 1/16" x 2 FT. x 3 FT. ROLL 99 BLACK 8019636 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . 8037095 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

599 599

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

Need that item but you haven’t got time to shop in-store?

Give us a call! Phone and Fax orders are accepted at all locations or phone us toll free:

1-800-665-8685

207

OILS & LUBRICANTS/AUTOMOTIVE CHEMICALS

AUTOMOTIVE CHEMICALS A) BRAKE PARTS CLEANER • Special formulation quickly dissolves and removes brake fluid, oil, grease, and other contaminants from brake linings, drums, and other brake parts • Contains no CFCs • 510 g 49 6420083 – Wt 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) ENGINE DEGREASER • Heavy duty degreasing solvents aid in the removal of tough grease, dirt and grime • 454 g 99 8005026 – Wt 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) CHOKE & CARB CLEANER • Concentrated carburator cleaner that rapidly removes fuel gum & varnish to maximize fuel economy and performance • Also cleans valve and emission control units • Oxygen sensor and catalytic convertor safe • 404 g 99 8050528 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) PAINTABLE UNDERCOATING • Fast-drying, paintable rubberized undercoating is exceptionally resistant to abrasions • Remains flexible and is compatible with standard automotive paints • 550 g 49 8050544 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 3

FUEL INJECTOR CLEANER

DEODORIZED BRAKE CLEANER • Low odour as compared to standard brake cleaners • Quickly removes brake dust and fluid, oil, grease and other contaminants from brake linings, rotors, drums and other brake parts • Non-flammable • 539 g 8095507 – Wt. 1.6 lbs . . . . . . . . . . . . . . . . . . . . . . .

DIESEL FUEL CONDITIONER

• Cleans fuel system including fuel injectors and intake valves • Cleans fuel system in one application 99 • Improves fuel economy and restores power • Reduces exhaust emissions • 350 ml 8153512 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

499

AIR BRAKE ANTIFREEZE

• Proprietary formula designed for diesel fuel • Eliminates varnish & sludge, reduces corrosion, prevents stalling, frozen fuel lines, and retards wax formation • Eliminates moisture in fuel tanks to prevent internal tank corrosion • Contains anti-gel properties • Treats up to 2,200 litres • 1 litre 99 8050445 – Wt. 2.0 lbs . . . . . . . . . . . . . . . . . . . . . . .

• Absorbs condensation ensuring complete protection against frozen air lines on trucks, buses, and construction equipment • Anti-corrosive agent protects all steel, rubber, and brake line parts • 950 ml 8050478 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . .

349

FUEL STABILIZER

GAS LINE ANTIFREEZE

208

• Year-round product prevents frozen gas lines during winter and vapour lock during summer • Contains isopropyl alcohol • Specially designed for fuel injected engines and snowmobiles • 150 ml. 8050452 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

• Formulated to keep fuel fresh during storage • Prevents formation of gum, tarnish, rust and corrosion • Prevents fuel thickening • Absorbs moisture • Provides easier start-up after storage • For all 2 & 4 cycle gasoline and diesel engines ¢ • 325 ml 99 8210585 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . .

DIESEL LUBRICANT

• All season diesel lubricant • Lowers the pour point of diesel fuel and helps disperse water 99 • Cleans & lubricates the entire fuel system while decreasing engine smoke and increasing power BONUS • Treats up to 3,000 litres • Alcohol-free, low sulphur formula SIZE • 1.92 litre 8050460 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . .

STARTING FLUID

• Helps start all types of gasoline & diesel engines • Anti-corrosive and contains an upper cylinder lubricant to reduce dry-start engine wear • Can fits injector brackets on heavy duty diesel equipment • 316 g 8223893 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

OILS & LUBRICANTS

279 C

A) ELECTRIC MOTOR OIL • Special blend for 1/4 HP motors or larger • SAE 20 • 88 ml (3 oz) 6410001 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . B) SAE 10 OIL • Applicator bottle with telescoping, flexible spout • 118 ml (4 oz) 6410027 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

299 349

C) SPRAY CAN 311 g (11 oz). 6420152 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . D) SPRAY BOTTLE WHMIS information for WD-40 is right on the bottle. 6420210 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . E) BULK REFILL 3.78 litres. 6420145 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . . . .

469

AUTOMOTIVE CHEMICALS/SHOP CLEANUP

ENGINE FOGGER

499

2199

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

SHOP TOWELS

SHOP CLEANUP

• Heavy duty lint free cotton • Size: 14-1/2" x 15" • For polishing, paint clean-up, general shop, and household use • Pkg. of 50 3890581 – Wt. 3.0 lbs. . . . . . . . . . . .

ULTRASORB ALL PURPOSE ABSORBENT

1899/pkg.

COTTON WIPES • 10 lb. bag • Mixed white/grey fleece cotton material 3890892 – Wt. 10.2 lbs. . . . . . . . . . . . • Absorbs oil, grease, water, coolant, and more • Made of 100% diatomaceous earth • Approximately 50% more absorbent than clay alternative • Absorbs 100% its weight in oil or water • Can also be used as an animal litter, potting soil, traction aid, and odour control material 99 6490011 – Wt. 33.7 lbs. . . . . . . . . . . . . . . . . . .

1199/pkg.

5 PK MICROFIBRE CLOTHS • Traps dust and leaves a streak free shine • Use damp for chemical free window cleaning • Re-useable, machine washable 8153595 – Wt. 0.4 lbs.. . . . . . . . . . . . . . . . . . . . .

499

209

SHOP CLEANUP

BREEZE SICLE ODOUR NEUTRALIZER

GLASS CLEANER

• Quickly eliminates odours in residential, commercial and industrial areas • Long lasting, fresh distinctive sweet fragrance • 420 g aerosol can 8150583 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Concentrated, all purpose glass cleaner rapidly removes road film and dust • Ideal for auto, marine, fleet and home applications BONUS • Cleans windows, mirrors, SIZE formica and porcelain • Specially formulated for body shops and industrial use 99 • 624 g 8172348 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . .

499

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

HAND CLEANERS

GOJO NATURAL ORANGE • Quick acting lotion formula • Contains no harsh chemicals, petroleum solvent, mineral oils or ammonia • For medium to heavy duty soils including resins, oil, grease, tar, grime, soil, printer's ink, epoxies, paint, rubber cement, gasket, and tile epoxies • Also works great on laundry stains, scuff marks, tile floors, pet odours and other household cleaning needs

Size Wt. (lbs.) 414 ml 1.1 1.89 litre 4.7 3.78 litre 9.1 3.78 litre 8.6 (Non-pumice)

ITEM 6420285 6420293 8024407

PRICE 3.49 7.99 14.99

8144867

14.99

HAND CLEANERS A) 30 PACK GOJO HAND TOWELS • Powerful natural citrus cleaning formula removes the toughest grease, grime, ink, paint, resin, glue, and other difficult soils • Textured, non-scratching weave on one side is ideal for cleaning heavy duty soils from hands, tools and work areas • Reverse side is smooth for general purpose cleaning 99 8001933 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) GOJO HAND CLEANER • THE ORIGINAL WATERLESS HAND CLEANER • Cream formula takes off many difficult to remove substances yet is gentle on skin and leaves no greasy residue • For medium soils including resins, oil, grease, tar, grime, soil, printer's ink, epoxies, paint, rubber cement, gasket and tile cements • 400 g 99 6420251 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) TROUNCE® HAND CLEANER • Professional heavy duty strength • Pleasantly scented, contains fine ground pumice for deep scrubbing to remove the most difficult soils • Fast-acting, won't irritate hands or leave a greasy residue • Suggested applications include: oil, grease, tar, grime, soil, resins, printer's ink, epoxies, paint, tiles, cement and stains 99 8070849 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) PERMATEX BLUE LABEL HAND CLEANER • The original waterless hand cleaner • Removes difficult substances yet is gentle on hands • For oil, grime, soil, resins, ink, paint, cement, gasket and tile adhesives • 2 kg container 8070831 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

210

999

NOTE: HAZARDOUS MATERIALS CANNOT BE SHIPPED.

BROOMS

PROFESSIONAL QUALITY BROOMS

A 24" WIDE BROOMS Heavy-duty 1-1/8" x 60" (5 ft.) hardwood handle with brace. A) FINE SWEEP BROOM For general use on smooth floor surfaces. 8005140 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . B) MEDIUM SWEEP BROOM 2-3/4" long bristles. 3810065 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . C) ROUGH SURFACE BROOM • 4" long bristles • For gravel and heavy debris 3810064 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . .

2899 2899 3499

BROOM HEADS, HANDLES & BRACE

D) WOODEN COUNTER/BENCH BRUSH • 14" long (9" brush face, 2-3/4" trim) • Filled with feather tip synthetic fibre 3810010 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) SYNTHETIC HORSEHAIR WINDOW/AUTO BRUSH • 10" structural foam block densely filled with synthetic horse hair • Takes any standard or fountain handle 3810019 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) STIFF SWEEP BROOM HEADS • For parking lots, driveways, snow, mud, and grain • Oil and solvent resistant • Head use threaded handles with pre-drilled holes to add a brace 18" WIDE 3810090 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24" WIDE 3810108 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) COMBINATION BROOM HEADS • Soft tip around a stiff fibre centre • For both debris and fine dust • Heads use threaded handles with pre-drilled holes to add a brace 18" WIDE 3810116 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24" WIDE 3810124 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

1199

699 899

899 1149

24" PUSH BROOM/ SQUEEGEE COMBO

H) JUMBO BRACE FOR PUSH BROOMS 3810012 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Suitable for smooth to rough surfaces • Ideal for: concrete, paths, rough wood and patio stones • Removes gravel, dust and dirt 79 • Great for wet, dry or oily surfaces 8180044 – Wt. 4.0 lbs.. . . . . . . . . . . . . . . . . . . .

2499

HARDWOOD HANDLES Handle Type I

I Threaded Tip J Tapered Handle K Metal Handle

Wt. (lbs.) ITEM PRICE 15/16" x 54" 1.2 3810157 3.99 1-1/8" x 54" 1.0 3810165 3.99 1-1/8" x 54" 0.8 8005128 3.79 Size

211

SQUEEGEES

SQUEEGEES WINDOW SQUEEGEES

A) 10" WINDOW SQUEEGEE 10" head, 20" handle. 8177768 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 10" TELESCOPING WINDOW SQUEEGEE Handle extends from 4 to 7 ft. 3810052 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

1999

FLOOR SQUEEGEES C

E D Oil resistant red foam blade. Type Straight C Straight Curved D Curved Handle E

Width 24" 36" 24" 36" 54"

Wt. (lbs.) 3.0 4.2 3.1 3.2 1.0

HANDLES SOLD SEPARATELY ITEM PRICE 3811007 22.99 3811015 29.99 3811023 28.99 3811031 35.99 3810165 3.99

FLOOR SQUEEGEES STRAIGHT 8123853 – 24"

1499 8133076 – 36" 99 Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 18 Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

CURVED 8123861 – 24"

1499 99 Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 18 Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

8133084 – 36"

212

Terry Haas spent most of his career heavily involved in our retail side of the business. He worked his way up to Store Leader and from there, became our Retail Operations Leader with responsibilities for all stores. Terry helped to run our first training schools and spent many hours teaching sales and product knowledge classes. He set a great example for our students and team members with his terminology of “giving 110%”. His hard work and dedication helped establish such programs as Customer View, The Specialty Store and Royal Service. Terry and his family moved to California in 1989 to join the family business.

Produce a moisture free heat as they heat the object the heater is facing, rather than the air surrounding it. These types of heaters are ideal for construction applications or where electricity is not available.

HEATERS

RADIANT PROPANE HEATERS

TANK TOP HEATERS • Piezo push button ignitor • Heater shuts off automatically with loss of flame • Mounts directly to a propane tank (not included) A) SINGLE TANK TOP HEATER • 3 heat settings: 8, 12 & 14,000 BTU • 30 to 52 hours on 20 lb. tank 8213621 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . .

7499

B) DOUBLE ELEMENT TANK TOP HEATER • 6 heat settings: 8, 12, 14, 16, 24 & 28,000 BTU • Up to 15 hours (at Hi) on a 20 lb. tank 99 8066508 – Wt. 9.6 lbs. . . . . . . . . . . . . . . . . .

119

BUDDY HEATERS • No electricity required • Piezo push-button ignition • Automatic “low-oxygen” shut off system and “accidental tip over” protection • Quiet, odour-free, and lightweight C) BUDDY HEATER • 4,000 to 9,000 BTU • Heats up to 200 square feet • Uses 1 lb. propane cylinder (3 to 6 hours) or 20 lb. propane cylinder (48 to 110 hours) with optional hose connection 99 8007152 – Wt. 9.6 lbs. . . . . . . . . . . . . . . . . .

119

D) BIG BUDDY HEATER • 4,000 to 18,000 BTU • Heats up to 400 sq. ft. • Uses two 1 lb. cylinders (3 to 12 hours) or two 20 lb. cylinders (50 to 220 hours) propane cylinders with optional hose connection • Optional A/C adapter available (8175663) • Use 4 D-cell batteries to power blower fan • Large 4-position heat level control knob • Swing-open doors with swivel-out mount for easy cylinder installation 99 8172462 – Wt. 18.7 lbs. . . . . . . . . . . . . . . . . E) PROPANE HOSE ASSEMBLY For 5 to 20 lb. tanks with hand tighten swivel on both ends. 5 FT 99 8008633 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . 12 FT 99 8008567 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . F) OPTIONAL A/C POWER ADAPTER • Optional power supply for Big Buddy heater • Input: 120VAC, Output: 6VDC 800mAH 99 8175663 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . G) PROPANE FILTER • For use with buddy heater (8007152/8172462) • Help protect your buddy heater from propane hose and propane tank contaminants 99 8124315 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

169 24 34

Sign-up to receive E-mail notification of our upcoming promos at:

www.princessauto.com

213

HEATERS

DIRECTIONAL RADIANT HEATERS • Directly heats objects, which in turn heats surrounding air • Quiet, clean, odor-free operation • No electricity required

35,000 BTU PORTABLE PROPANE HEATER • O’all dim.: 12"L x 10"W x 34"H • Consumes up to 1.6 lbs./hr • Piezo push-button ignition • Folding handle and transport wheels • Includes 12 ft. hose and regulator • Heater shuts off with loss of flame or tip over • Heats up to 800 sq. ft. for up to 12 hours on a 20 lb. propane tank (not included) 99 8007150 – Wt. 23.3 lbs. . . . . . . . . . . . . . . . . . . . . .

169

25,000 BTU NATURAL GAS SHOP HEATER • Heats up to 600 sq. ft. (2-1/2 car garage) • Easy to operate and install • Includes all necessary brackets, hardware and thermostat • Thermocouple generates power from pilot flame to control the Millivolt thermostat • No electricity is required • O’all dim.: 29"L x 12"W x 7"H 99 8140121 – Wt. 20.9 lbs. . . . . . . . . . . . . . . . . . . . . .

349

CONVECTION PROPANE HEATERS Circulate heat without electricity. Cool air is drawn in through the bottom, hot air flows out of the top of the heater creating inflow/outflow. These heaters are best suited for small to medium size areas where electricity is not available.

CONVECTION PROPANE HEATERS • No electricity required • Standing pilot with piezo push button ignitor for safety • 10 ft. hose and POL fitting included A) 30,000 TO 80,000 BTU VARIABLE OUTPUT • Heats approximately 1,900 sq. ft. for up to 14 hours on a 20 lb. propane tank (not included) • 1.4 to 3.7 lbs/hour fuel consumption 99 8000985 – Wt. 18.4 lbs. . . . . . . . . . . . . . . . . B) 75,000 TO 200,000 BTU VARIABLE OUTPUT • Heats approximately 4,700 sq. ft. for up to 29 hours on a 100 lb. propane tank (not included) • 3.5 to 9.3 lbs/hr fuel consumption 99 8000988 – Wt. 19.6 lbs. . . . . . . . . . . . . . . .

159

214

179

Forced air heaters use an electric fan to pull in cold air, and force out the hot air. Ideal for heating larger areas and are available in either propane or liquid kerosene fueled models.

HEATERS

FORCED AIR HEATERS

FORCED AIR PROPANE HEATERS

A B

• Heavy duty high output fan • Heater shuts off with loss of flame or power supply • 10 ft. hose, POL and regulator included • Piezo push-button ignition • Propane tanks not included

HEAT

up to 800 sq./ft.

IGNITION HEIGHT CONTROL THERMOSTAT MIN. TANK SIZE

Piezo

A) 30,000 to 55,000 BTU up to 1,250 sq./ft. Continuous

Adjustable

Built-In

20 lbs.

40 lbs.

100 lbs.

CONSUMPTION (LB/HR)

1.6

1.2 to 2.1

3.5 to 5.8

5.8 to 7.9

9.3 to 18.5

CFM Wt. (lbs.) ITEM

100

300

350

450

1400

15.1

17.6

21.2

26.7

95.0

8007138

8007139

8007141

8007142

8208340

PRICE

13999

16999

22999

35999

74999

A) 35,000 BTU

118,000 BTU INDIRECT FIRED DIESEL HEATER • Output: 880 CFM • Fuel consumption: 0.81 gallon/hour • Tank capacity: 11.9 gallons • Duct diameter: 12" • Requires heating duct and adapter • Maximum length of duct : 50 feet 8208357 – Wt. 94.0 lbs. . . . . . . . . . . . .

159999

B) 75,000 to 125,000 BTU up to 3,000 sq./ft. Continuous

B) 125,000 to B) 250,000 to 170,000 BTU 400,000 BTU up to 4,000 up to 9,000 sq./ft. sq./ft. Solid State Solid State

400,000 BTU DIRECT FIRED DIESEL HEATER • Output 2,500 CFM • Fuel consumption: 2.8 gallon/hour • Tank capacity : 27.7 gallons • 1 HP motor 99 8208365 – Wt. 223.0 lbs. . . . . . . . . . . .

2499

215

HEATERS

- Use an electric fan to pull in cold air, and force out the hot air. Ideal for heating large areas - Maintain their full effectiveness down to -29°C (-20°F). - Portability makes these heaters ideal for outdoor applications. - Requires 1 sq. ft. opening to fresh air per 100,000 BTUs of heater output. Example: a 200,000 BTU heater requires a 2 sq. ft. opening

FORCED AIR KEROSENE HEATERS

B C

• Heavy duty high output fan - heater shuts off with loss of flame or power supply • Continuous ignition • Equipped with built-in adjustable thermostat, illuminated on/off switch (except for 8007143) A) 50,000 BTU HEAT (up to:) CONSUMPTION (up to:) OPERATION (up to:) THERMOSTAT Wt. (lbs.) ITEM PRICE

B) 75,000 BTU C) 125,000 BTU C) 175,000 BTU C) 210,000 BTU

1,200 sq./ft.

1,750 sq./ft.

3,000 sq./ft.

4,250 sq./ft.

6,000 sq./ft.

1.4 litre/hr

2.1 litre/hr.

3.5 litre/hr

5.0 litre/hr.

6.6 litre/hr.

11 hours/ 15.1 L (46 gal.) tank no

11 hours /22.7 litre (6 gal.) tank Built-In

15 hours /53 litre (14 gal.) tank Built-In

10 hours /53 litre (14 gal.) tank Built-In

8 hours /53 litre (14 gal.) tank Built-In

43.0

74.0

81.0

87.0

8007143

8007144

8007145

8007147

8208332

24999

29999

39999

44999

54999

KEROSENE HEATER REPLACEMENT PARTS Kerosene heaters have an annual maintenance program to operate reliably. Change filters every year. OUTER KEROSENE FILTER 8062291 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INNER KEROSENE FILTER 8062309 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEROSENE FUEL PUMP 8143406 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

349 349 3699

KEROSENE

DIESEL HEATING ACCESORIES E D

216

D) 12" DUCTING ADAPTER 8223273 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . E) 25 FT. FLEXIBLE HEATING DUCT 8223307 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . THERMOSTAT 8224859 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10999 29999 9999

Sorry, cannot be shipped. 10 litres. Wt. 18.0 lbs.

6480123 . . . . . . . . . . . . .

1899

• Quiet operation • Power exhaust allows for vertical or horizontal venting from left or right side • Tubular heat exchanger for maximum efficiency and longer life • Spark ignition features self-diagnostic control module • 3-year warranty on parts and burner, 10-year warranty on heat exchanger

Please follow your provincial regulations for natural gas appliance installations and where required, have a certified gas fitter install this gas appliance.

A) 45,000 BTU PROPANE MODEL • Easily heats 2 to 3 car shop (700 sq.ft.) • Low profile design • Cabinet size: 12" x 18" x 25" • Requires 3" vertical or 4" horizontal vent kit 99 8065815 – Wt. 66.5 lbs. . . . . . . . . . . . . . A) 45,000 BTU NATURAL GAS MODEL 99 8065799 – Wt. 66.5 lbs. . . . . . . . . . . . . . . . A) 75,000 BTU NATURAL GAS MODEL • Easily heats 3 to 4 car shop (1,000 sq.ft.) • Low profile design • Cabinet size: 17" x 18" x 25" • Requires 4" vertical or horizontal vent kit 99 8164683 – Wt. 70.0 lbs. . . . . . . . . . . . . . .

HEATERS

PROPANE/NATURAL GAS UNIT HEATERS

699 699

799

GAS CONVERSION KITS B) PROPANE TO NATURAL GAS 45,000 BTU model. 8085409 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . B) NATURAL GAS TO PROPANE 45,000 BTU model. 8164873 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . B) NATURAL GAS TO PROPANE 75,000 BTU model. 8164881 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . C) LOW VOLTAGE THERMOSTAT 8065856 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . .

3499 3499

3499 3999

VENT KITS D) 8 PC 3" VERTICAL For 45,000 BTU model only. 8065831 – Wt. 11.4 lbs. . . . . . . . . . . . . .

11999

D) 8 PC 4" VERTICAL 8164899 – Wt. 13.8 lbs. . . . . . . . . . . . . . .

11999

E) 7 PC 4" HORIZONTAL 8208373 – Wt. 13.8 lbs. . . . . . . . . . . . . .

13499

8 PC VERTICAL VENT

7 PC HORIZONTAL VENT

4,800 WATT CONSTRUCTION HEATER • 16,400 BTU, 300 CFM • 240 volt, 4,800 watts • 6 ft. grounded 30 amp cord • Adjustable thermostat with safety cutout • O’all dim.: 11-3/8"H x 10-1/2"W x 7-1/4"D 8001017 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8499

PLUG RECEPTACLE FOR #8001017 250V, 3-wire grounding surface receptacle. 0705012 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1199

217

SAFETY – EYEWEAR

A to E safety glasses feature a polycarbonate lens, tether cord, and are SEI certified to meet CSA standards.

SAFETY GLASSES B

F D) GLASSES • Distortion free, impact resistant polycarbonate lens with anti-fog coating • Comfortable, soft padded nosepiece

A) GLASSES • Wraparound design • Adjustable temple length • Scratch resistant lens Wt. 0.2 lbs.

Wt. 0.1 lbs.

8173551 – CLEAR LENS 8173577 – AMBER LENS 99 /ea. 8173585 – MIRRORED LENS . . . . . . . E) GLASSES 49 • Impact resistant lens with anti-fog and UV protection • Lightweight metal frames with padded nosepiece

349

8173544 – CLEAR LENS 8173452 – GREY LENS. . . . . . . . . . . . . . . . . . . . . . B) HOBBY/VISITOR GLASSES • Lightweight polycarbonate lens • Fits over most prescription glasses Wt. 0.1 lbs. • Clear lens 79 8173601 – CLEAR LENS 8173494 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . 99 /ea. 8173619 – GREY LENS . . . . . . . . . . C) INDOOR/OUTDOOR GLASSES • Maximum peripheral vision F) COLOURED LENS SAFETY GLASSES • Anti-fog, anti-scratch, and anti-static coating • Polycarbonate lens • 99.9% UV protection • Meets ANSI Z87.1 standards

3 4

Wt. 0.2 lbs.

8173502 – BLUE MIRROR LENS 8173510 – MIRROR LENS 8173528 – GREY LENS . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs. 99

8160186 – RED LENS 8160194 – YELLOW LENS /ea. 8160202 – CLEAR LENS. . . . . . . . . . . .

249/ea.

BIFOCAL SAFETY GLASSES Lightweight design combines safety features with bifocal lenses. Wt. 0.1 lbs.

CLEAR LENS 8098675 – 1.5x 8098691 – 2.0x . . . . . . . . . . . . . . . . . . . . . . . .

GREY LENS 8184632 – 1.5x /ea. 8185936 – 2.0x . . . . . . . . . . . . . . . . . . . . .

1499/ea.

SAFETY GOGGLES H

J I

J) SAFETY GOGGLES with DUSTPROOF VENTS • Soft PVC frame • Elastic head band • CSA certified to Z94.3-02 standards 49 8193021 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . G) ANTI-FOG GOGGLES • Soft pliable lightweight frame K) FACE SHIELD WITH CLEAR VISOR • Adjustable strap • Floating snap-lock suspension • Provides protection against liquid and flying • Sponge-cushioned headband 99 particles 99 8059164 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . 8173627 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . REPLACEMENT VISOR H) WIDE VIEW GOOGLES Polycarbonate replacement visor for 8059164. • Scratch-resistant curved polycarbonate 8181745 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . 6.99 lens for good visibility L) FACE SHIELD with FLIP-UP CLEAR VISOR • Soft PVC frame with air vents Black head gear with 8" x 13-1/2" shield. • 1" wide adjustable band 99 99 5040647 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . 8175697 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . CLEAR REPLACEMENT VISOR I) GOOGLES WITH INDIRECT VENTS 5040621 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . 3.99 • Soft PVC frame GREY #3 SHADE REPLACEMENT • Elastic head band • CSA certified to Z94.3-02 standards 99 VISOR 8203754 – Wt. 0.2 . . . . . . . . . . . . . . . . . . . . . . 4.99 8193039 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

218

SAFETY - RESPIRATORS

READING GLASSES Anodized alloy frame with optical acrylic lens. Wt. 0.1

8203184 – + 1.00 8203259 – + 2.50 8203234 – + 1.50 8203259 – + 3.00 8203242 – + 2.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RESPIRATORS

99¢

D A) 3 PK N95 DUST RESPIRATOR • Adjustable metal nosepiece • Dual straps 99 8173643 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) N95 DUST RESPIRATOR with EXHALE VALVE • Exhalation valve reduces heat and humidity build-up • Lightweight comfort • Adjustable metal nosepiece and dual straps 99 8173650 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) P95/ORGANIC VAPOUR PAINT/PESTICIDE RESPIRATOR • Protects against 95% of contaminates when working with solvent, glue, pesticides, fertilizer, and spray painting of lacquers and enamels • Comfortable lightweight design with flexible facepiece • Low profile for better vision 99 8173668 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PC REPLACEMENT P95 FILTER CARTRIDGES 8173692 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.99 6 PC REPLACEMENT PREFILTERS FOR FILTER CARTRIDGE 8173684 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.99

5 6

D) P100 ASBESTOS/LEAD RESPIRATOR • Protects against 99.97% of toxic dust, mist and fumes, lead dust and fumes, asbestos, and oil mist • Comfortable lightweight design with flexible facepiece • Low profile for better vision 99 8173718 – Wt. 0.7 lbs. . . . . . . . . . . . . 2 PC P100 REPLACEMENT FILTER CARTRIDGES 8173726 – Wt. 0.3 lbs. . . . . . . . . . . . . 24.99 E) FULL FACE RESPIRATOR • R95/ORGANIC VAPOUR • NIOSH approved for protection against paints, pesticides, organic vapours, lacquers, dusts, and fibreglass • Nose cup design helps prevent fogging • Includes two R95 filters and carrying case • Interchangeable with P100 filters (8045510) 99 8046021 – Wt. 4.4 lbs. . . . . . . . . . .

169

4 PC REPLACEMENT PREFILTERS 8068942 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 9.99 2 PC R95/ORGANIC VAPOUR REPLACEMENT FILTER 8045494 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . 19.99 2 PC P100/ORGANIC VAPOUR REPLACEMENT FILTERS 8045510 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . 24.99

DUST MASKS

F) DUST MASK with REPLACEABLE FILTER 99 8013936 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT FILTERS - PKG. OF 5 8013927 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . 99¢ G) BOX OF 50 DISPOSABLE DUST MASKS 99 5041025 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . H) 5 PK DUST RESPIRATOR • N95 rated • With exhale valve 99 8193047 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . I) PKG OF 20 DISPOSABLE DUST MASKS • N95 rated • Double straps hold mask in position 99 8047516 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

1 6

12 18

219

HEARING PROTECTION

EARPLUGS 10 PAIR

A) 10 PR FOAM EAR PLUGS • Low pressure plugs • Expandable foam for better fit • NRR of 29 dB 79 8173734 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) BAND-STYLE EARPLUGS • Lightweight soft earpiece • Flexible multi-position headband 49 8173775 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 100 PR FOAM EARPLUGS • Low pressure plugs • Expandable foam for better fit • NRR of 29 dB 99 8173783 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . D) RUBBER EARPLUGS with CORD • Unique 4 layer cut off design enhances the soundinsulated effect • Non-slip terminal stem for easy insert into ear • NRR of 27 dB ¢ 8159899 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . E) 4 PC RUBBER EARPLUGS • Unique 4 layer cut off design enhances the soundinsulated effect • Non-slip terminal stem for easy insert into ear • NRR of 27 dB ¢ 8159915 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . F) BAND-STYLE RUBBER EARPLUGS • Flexible headband • Soft, lightweight earpiece • NRR of 26 dB 99 8159907 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

A B

C 100 PAIR

HEARING PROTECTION H

G) HEARING PROTECTORS NRR of 26 dB. 99 5040514 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . H) HEARING PROTECTORS • NRR of 28 dB • Automatically adjusts for a snug comfortable fit • 3-position padded headband 99 5060004 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . I) HARD HAT HEARING PROTECTORS • NRR of 22 dB • Clips into standard hard hat slots 99 8192080 – Wt. 0.6 lbs. . . . . . . . . . . . . J) HEARING PROTECTORS • NRR of 26 dB • Compact folding design for easy storage and portability 99 5060003 – Wt. 0.5 lbs. . . . . . . . . . . . . .

220

K) HEARING PROTECTORS • NRR of 20 dB • Soft, comfortable ear pads • Plastic band for use around electrical hazards 99 8045528 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . L) ELECTRONIC HEARING PROTECTORS • Isolates harmful noise with the ability to hear normal surroundings through a microphone • Rotary dial to control volume levels • Noise-level limit: 85 dB, protects NRR 20 above 85 dB • Requires 2 “AA” batteries (not included) 99 8191975 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . M) RADIO HEARING PROTECTORS • AM/FM radio and electronic hearing protectors in one • Electronic hearing protection mode automatically protects to NRR 24 above 85 decibels, allows the ability to hear normal surroundings • Adjustable head band • Requires 2 “AA” bateries (not included) 99 8163990 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• Lightweight, durable ABS plastic liner provides protection from minor bumps, bruises and lacerations where hard hat protection is not required • 100% cotton dark navy-blue cover • Cooling ventilation eyelets permit air circulation • Adjustable back strap fits most head sizes 99 8175242 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A) CSA TYPE 1 CLASS E HARD HATS • Sliding pin lock head band • Top, impact and penetration protection • 4 point nylon suspension

HARD HATS

Wt. 0.8 lbs.

8184640 – WHITE 99 /ea. 8185951 – YELLOW (SHOWN) . . . . . . . . . . B) CSA TYPE 1 CLASS E HARD HATS • Easy to adjust size with ratchet adjustment • 4-point nylon suspension

Wt. 0.9 lbs.

8223588 – WHITE 99 /ea. 8223596 – YELLOW (SHOWN) . . . . . . . . C) CSA TYPE 2, CLASS E HARD HATS • 4-point nylon suspension • Ratchet style sizing adjustment • Lightest weight available in the industry • Low profile with improved rain trough design draws rain away from back of hat • Moulded foam liner

HARD HATS & KNEE PADS

SOFT BUMP HAT

Wt. 1.0 lbs.

8003912 – WHITE (SHOWN) 8004314 – YELLOW . . . . . . . . . . . . . . . . . .

3299/ea.

KNEE PADS D E D) FOAM/HARD CAP KNEE PADS • Foam knee pads with hard cap • Double 1-1/2" elastic velcro straps 8154510 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . E) FOAM/FABRIC KNEE PADS • Foam knee pads with fabric cover • Ideal when working on delicate surfaces • Extra large velcro strap 8154528 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . F) GEL KNEE PADS • Non-slip PVC outer cap • Gel padding provides extra comfort • Elastic strap with hook and loop closure 8104408 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . .

KNEE PADS

G F

499

G) GEL KNEE PADS • Gel padding for extra comfort • Oversized cap for extended protection • Cap is non-skid and non-marking • Extra-wide velcro strap 99 8154536 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . H) GEL KNEE PADS • Adjustable double straps • All fabric construction with soft gel padding 99 8068827 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

1499

I) FOAM KNEE PADS with HARD CAP • Hinged design allows kneeling surface to bend • Breathable lining and Velcro® fasteners 99 5040087 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . J) ACCORDIAN FLEX KNEE PADS • Accordian top design helps secure the kneepad in position as you get up and down • Durable outer cover makes it ideal for rougher surfaces • Straps are comfortable and easy to adjust 99 8199929 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . .

K) GEL KNEE PADS with HARD CAP • Sewn on cover with fabric elastic sleeves, injected honeycomb GEL • Non-marring surface 99 8199911 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . L) GEL ALL-TERRAIN KNEE PADS • Sewn on cover • Made with GELite padding; a unique blend of GEL and polyurethane foam • Extremely durable and lightweight • Wide lycra elastic with a hook and loop fastening strap 99 8199895 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . .

221

FIRST AID KITS/SAFETY WEAR

FIRST AID KITS B

A) GENERAL PURPOSE FIRST AID KIT • Contains: first aid book, 12 adhesive bandages, 4 finger tip bandages, four 2" x 2" gauze pads, 6 alcohol wipes, 6 towelettes, 12 cotton balls, 4 adhesive strips, one 1" x 180" gauze bandage, antiseptic cream, and three 2-packs of acetaminophen • O’all dim.: 8" x 5" x 2-1/2" 99 8068850 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

SAFETY VESTS

C) REFLECTIVE VISIBILITY VEST • High visibility orange mesh • Reflective front and back stripes • Adjustable sides and velcro front closure • One size fits most 99 8093643 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . D) SAFETY VEST • 5 point velcro tear away design • Meets ANSI safety vest standards • 4 front storage pockets 8224115 – LIME GREEN 99 8224123 – ORANGE . . . . . . . . . . . . . . .

SAFETY WEAR

F G

F) DISPOSABLE HOODED COVERALLS LIGHT WEIGHT XL – 30 G 100% polypropylene. 99 8105991 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . HEAVY WEIGHT XL – 60 G 100% polypropylene. 99 8105892 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . G) WRIST WRAP • Fits left or right hand • Restrains wrist movement • Protects against repetitive impact and vibration • Protective palm cushion with breathable mesh lining • Size: medium/large 99 5040088 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . H) BACK SUPPORT BELT • Adjustable panels for extra lower back support • 1-1/4" wide elastic suspenders with adjustable clips • Reduces back strain • Adjustable to fit waist sizes 38" to 47" 99 8167462 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

2 4

SHOP COAT • 8 oz. cotton/polyester blend • 2 front lap pockets and 1 chest pocket with pen holder • Covered front button closure

222

Size

Neck

Chest

Arms

Medium Large X-Large

14" to 15-1/2" 16" to 16-1/2" 17" to 17-1/2"

38" to 40" 42" to 44" 46" to 48"

23" 25" 26"

Wt. (lbs.) ITEM PRICE 1.5 8183352 29.99 1.6 8183394 29.99 1.6 8183402 29.99

GLOVES AND MITTS

WINTER GLOVES & MITTS

3 PAIR E F A) BROWN JERSEY GLOVES • Useful as a liner • Knit wrist keeps out debris 8004856 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . B) FLEECE LINED JERSEY GLOVES 8175218 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . C) JERSEY LINED PVC DOT GLOVES PVC dots on palm and fingers for added grip. 8006344 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . D) FLEECE LINED ECONOMY COWHIDE 8006342 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

149 199

E) LINED LATEX PALM GLOVE Brushed poly fleece lining. 8078784 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

F) 3 PAIR FLEECE LINED ECONOMY 99 /pkg. 8006349 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . G) PILED LINED SPLIT LEATHER MITT 99 5050006 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . H) KNIT WRIST COWSPLIT THINSULATE GLOVES Knit wrist for warmth and less dirt entry. 99 8006836 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

349 499

I) COWSPLIT WORK GLOVES Foam and fleece lined. 5050071 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . J) WATER BARRIER COWSPLIT GLOVES 8006838 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . K) WINTER OIL GLOVES 12" lined PVC. 5050001 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . L) PILE LINED DRIVERS GLOVES Grain leather palm, cowsplit back. 8006339 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . .

499 8

6 799 899

1199

NEOPRENE GLOVES

M) FURNACE POCKET PIGSKIN & CANVAS GLOVES • Fleece lined • Palm and back have pockets to insert hand warmers (sold separately) 99 8006199 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . N) PILE LINED BLACK LEATHER MITTS 99 8078826 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . O) GOATSKIN/LYCRA DRIVERS GLOVES

12 16

Wt. 0.3 lbs. 8006352 – LARGE . . . . . . . . . . . . . . . . . . . . .

1999

PILE LINED NITRILE GLOVES

• Keeps hands warm and dry in a wide range of conditions • Non-slip grip wet or dry • Extra durable • For fishing, hunting and boating or as a liner • Protects against oil, grease, • Size: XXL and various other chemicals 99 8078941 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . 8078818 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

799

223

COATED WORK GLOVES

SNOWMOBILE MITT

LARGE LINED ANTIVIBRATION MECHANICS GLOVES

Pile lined. 8176679 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

1199

THINSULATE LINED GLOVE • Anti-slip fingertips • Leather palm 8176687 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

1999

• Washable synthetic leather palm with gel padding • Velcro wrist closure • Stretch spandex back • Blue or red 8078800 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

1699

COATED WORK GLOVES

A) PVC DIPPED GLOVE with KNITTED WRIST • Waterproof, fully coated PVC • Seamless design • Provides chemical protection 99 8004732 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . B) FULLY DIPPED NITRILE GLOVES • Waterproof, anti-slip nitrile coating with soft jersey lining • Superior resistance to oils, grease and solvents • Seamless construction is less prone to wear and splitting 49 8004729 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . C) GLOVE with LATEX COATED PALM • Latex palm provides anti-slip grip • Breathable cotton back • Wrinkle finish for wet or dry grip

F G

E) 3/4 DIPPED NITRILE GLOVES • Waterproof, anti-slip nitrile coating • Light chemical resistance • Extended dipping for added splash protection • Form fitting 49 8162109 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . Wt. 0.2 lbs. 8193971 – SMALL F) PVC PALM GLOVES 99 /pr. Form fitting with PVC foam coated palm with 8004874 – LARGE . . . . . . . . . . . . . . . . . . . nylon back. D) 14" PVC COATED GAUNTLET GLOVES 99 8075780 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . • Double dipped construction • Liquid proof protection from anhydrous G) ROUGH JOB GLOVES ammonia, petroleum products, acids, • Superior cut resistance for handling glass, caustics, solvents, and grease barbed wire and concrete blocks • Rough finish for wet and oily gripping 49 • Extra rubber for durability 99 8004829 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . 8004873 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

224

Ray Houde began his career with Princess in May of 1967. He left us for a short while and tried retirement but returned to work part-time in 2004. He has been with PAL for a total of 36 years. Ray is a unique, innovative team member who espouses honesty, calls it like he sees it, is dependable, can be counted on to get things done, can find solutions to complex problems, and is loved by his customers and the team members at the Panet Store.

WORK GLOVES

LEATHER/CANVAS GLOVES C

A) LARGE COWSPLIT UNLINED WORK GLOVES 99 5050034 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) XXLarge CANVAS/COWSPLIT WORK GLOVES 99 5050066 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . C) XLarge GRAIN LEATHER/CANVAS GLOVES 99 8082505 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 12 PAIRS UNLINED WORK GLOVES Cowsplit leather/denim construction. 99 /pkg. 8004872 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . .

2 4 8

12 PAIR D

LIGHT DUTY GLOVES E

PREMIUM GLOVES 6 PAIR F

J E) RUBBER CRISSCROSS GLOVES PVC criss-cross on both sides, can be worn on either hand. 99 8058596 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . F) 6 PAIRS WHITE COTTON GLOVES 99 /pkg. 8004864 – Wt. 0.7 lbs. . . . . . . . . . . . . . . .

SMALL WORK GLOVES H L

G) CHILDREN'S PALM LINED GLOVES Cowhide leather with cotton back. 5050083 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . H) SMALL COWHIDE/CANVAS GLOVES Durable cowhide leather. 8082489 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

399 599

ANTI-STATIC GLOVES

I) LARGE JERSEY GLOVES • Jersey fabric outwears cotton 3 to 1 • Rubber dots on key wear and protection areas • Assorted colours 99 8001120 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . J) 3/4 FINGER STRETCH FABRIC GLOVES 3/4 finger with pull tabs for easy removal. 8001108 – MEDIUM 49 /pr. 8001109 – LARGE – Wt. 0.3 lbs. . . . . . . . . . . K) SPLIT LEATHER GLOVES • Breathable stretch mesh back • Leather reinforced knuckle strap, and fingertips

Wt. 0.3 lbs.

8001102 – MEDIUM 8001103 – LARGE . . . . . . . . . . . . . . . . . . . . . . . Nylon glove with flexible polyurethane coating protects equipment from electrical discharge. Wt. 0.1

8207557 – LARGE 8210445 – EXTRA LARGE. . . . . . . . . . . . . .

299/pr.

999/pr.

L) PREMIUM ANTIVIBRATION PIGSKIN LEATHER GLOVES • Antivibration padded reinforced palm patch • Leather pull tab for easy on and off 8001104 – MEDIUM 99 /pr. 8001106 – LARGE – Wt. 0.3 lbs. . . . . . . . .

225

WORK GLOVES

FINGERLESS GLOVES

HIGH VISIBILITY FINGERLESS GLOVE

• Antivibration gel padded palm • Velcro strap wrist closure • Lycra back, goatskin palm 8166647 – LARGE 8166654 – X-LARGE – Wt. 0.1 lbs. . . . . . . . .

MECHANIC'S GLOVES

• Breathable stretch fabric with terry cloth thumb back for increased comfort 99 /pr. • Palm and thumb patches for improved grip and durability • Finger pull tabs for easier glove removal • Medium 8184616 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

999

DRIVING/RANCHING GLOVES

• Reinforced fingertips and thumb for longer wear • Close fit provides excellent dexterity and comfort • Synthetic suede leather is machine washable • Assorted colours

• Unlined, smooth grain cowhide leather • Elastic cuff

Wt. 0.2 lbs.

Wt. 0.4 lbs.

8006872 – MEDIUM 8006875 – LARGE . . . . . . . . . . . . . . . . . . . .

1699/pr.

8004822 – LARGE 8004825 – X-LARGE . . . . . . . . . . . . . . . . . . . .

999/pr.

DISPOSABLE GLOVES B A

A) 10 NITRILE GLOVES • Powder free • Superior dexterity, flexibility, and grip • Thickness: 4 mil. 8166076 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 100 LARGE VINYL GLOVES • 100% vinyl - containes no natural rubber latex • Liquid proof, durable, and tear resistant • Lightly powdered with anti-bacterial formulation 8190258 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 100 NITRILE ALL-PURPOSE GLOVES • Powder free • Extra durable, 3 times stronger than latex or vinyl • Protects against oils and greases • Good for people allergic to latex • 4 mil. thickness 8003208 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 50 HEAVY DUTY LATEX GLOVES • Extra durable • 11 mil. thickness (4-5 mil. is standard) 8064750 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199/pkg.

699/box

1299/box 14

D 99

/box

TECH TIP

226

Coated gloves are becoming more popular everyday. Covered with various types of rubber, typically latex, PVC or nitrile, they offer a better fit, increased wear and dexterity, and liquid resistance, as compared to the traditional leather “work glove”. Princess Auto carries a wide selection of coated gloves as well as nitrile, vinyl and latex disposable gloves.

1" x 24" REFLECTIVE SAFETY TAPE Wt. 0.1 lbs.

5040151 – FLUORESCENT ORANGE 5040152 – FLUORESCENT LIME 5040153 – SILVER . . . . . . . . . . . . . . . . . . . .

699/roll

SAFETY TAPE

FLUORESCENT FLAGGING TAPE

1" x 200 ft., 3 mil. thickness. Colour Wt. (lbs.) 0.3 Orange 0.3 Pink 0.3 Red 0.3 Yellow

B C

SAFETY TAPE & CONES

ITEM PRICE 8114134 2.99 8114118 2.99 8114126 2.99 8114142 2.99

A) “CAUTION” BARRICADE TAPE • Black print on yellow polyethylene tape. 9" SAFETY CONE • 3" x 300 FT. 99 5040089 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . B) “CAUTION DO NOT ENTER” TAPE 3" x 1,000 ft. 99 8105900 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . C) BLACK ANTI-SLIP SAFETY GRIT TAPE With reflective strip. • Use on steps, ramps, trailers, farm equipment 8154106 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . or anywhere a potentially hazardous slip may occur 15" SAFETY CONE • Indoor/outdoor use 1" x 16 ft. 99 8160509 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 2" x 16 ft. 99 8160491 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 1" x 60 ft. 99 8176307 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 2" x 60 ft. 99 • Collapsible 8176299 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . • With reflective strip 8003400 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

2 4 9 17

ANTI-SLIP GRIP STRIP • Helps prevent slips for safer footing • For use on on steps, ladders, ramps, farm equipment, decks, campers, boats, trailers, pools, docks • 6" x 21" 8040834 – Wt. 0.2 lbs.

299

999

24" SAFETY CONE

999

• Collapsible • With reflective strip 8154098 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . .

1499

LED TRAFFIC BATON • Flashing LED traffic baton visible up to 1/2 mile (800 M) • Durable ABS body • Uses 2 x 1.5v D batteries (not included) • Hand strap included 99 8220444 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

227

AUTOBODY TOOLS

AUTOBODY TOOLS DENT REPAIR

B A

A) 4 PC BODY FILLER APPLICATORS • Metal applicators with plastic grip • 1", 2", 3", and 4" widths 2990071 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 4 PC BODY FILLER APPLICATORS • Sizes: 2", 3", 4", and 6" • Stainless steel with polypropylene frame and thermoplastic rubber cushion grip 8159972 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SUCTION CUPS

399 999

7 PC AUTOBODY KIT C

E F

• Bumping, pick and reverse curve hammers • Fibreglass handles • Double ended, utility, heel and curved dollies 2990149 – Wt. 11.6 lbs. . . . . . . . . . . . . . . . . . INDIVIDUAL PIECES

2999

Wt. 1.0 lbs.

2990078 – UTILITY DOLLY 2990079 – DOUBLE ENDED DOLLY 2990080 – CURVED DOLLY 2990081 – HEEL DOLLY . . . . . . . . . . . . . .

C) 2 PC 3" SUCTION TRIM HOLDER • Holds adhesive mouldings in place for easier installation • For use with windshield mouldings, body side mouldings, emblems and nameplates 99 8139099 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 2 PC 2" SUCTION CUP • Cap.: 20 lbs. • Closing handle activates suction 99 8136608 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 4-1/2" SUCTION CUP • Cap.: 90 lbs. • Closing handle activates suction 99 8136616 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . F) 2-HEAD SUCTION CUP • 4-1/2" suction cups • Heads pivot slightly for better fit on concave surfaces • Cap.: 160 lbs. • Levers lock in place to hold suction 99 8136624 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . G) 3-HEAD SUCTION CUP • 4-1/2" suction cups • Cap.: 220 lbs. • Levers lock in place to hold suction 99 8136632 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . .

499/ea.

Wt. 1.1 lbs.

8002583 – REVERSE CURVE HAMMER 8002584 – PICK HAMMER 8002586 – BUMPING HAMMER . . . . . . .

499/ea.

6 8

228

I H) 3-IN-1 AUTOBODY DOLLY • Combines 1" dia. finger catch hole 1-1/8" dia. flat dolly • 1-5/8" x 3-7/8" spoon curve dolly 99 8103558 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . I) 9 PC DENT PULLER Includes: nose cone, thin hook, u-hook, duplex nut adapter, acme screw straight hook, utility hook, and 5 lb. slide hammer. 99 2990090 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . .

14 24

AUTOBODY FILLER

FILLER

GLAZING AND SPOT PUTTY

A) FILLER WITH CREAM HARDNER 1/2 LITRE 8204935 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . 1 LITRE 8204968 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . 3.78 LITRES 8204976 – Wt. 8.6 lbs. . . . . . . . . . . . . . . . . B) GLASS REINFORCED FILLER 1 litre. 8204984 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . .

599 849 2799 1299

127.5 g. 8205072 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

339

FIBREGLASS MAT

FIBREGLASS REPAIR C

8 square feet. 8205049 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

699

FIBREGLASS CLOTH E D

C) FIRBEGLASS REPAIR KIT Includes: liquid hardener, fibreglass mat, spreader, mixing stock and instructions. 236 ML 8205015 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . 500 ML 8205031 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . .

8 square feet. 8205056 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

899

LONG HAIR FIBREGLASS 99

11 1999

D) FIBREGLASS RESIN 1 litre. 8204992 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . .

1499

E) LIQUID RESIN 3.78 litre. 8205007– Wt. 10.7 lbs. . . . . . . . . . . . . . . . . .

4499

1 litre. 8205064 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . .

1299

SYNTHETIC STEEL WOOL

Wt. 0.1 lbs.

Grit

Steel Wool Equiv

Colour

Fine Medium

#000 #00

Grey 2970163 Maroon 2970164

ITEM

PRICE 3.49 3.49

• Size: 6" x 9" • Longer lasting than steel wool • Can be folded or cut to any size • Washable and reusable • 2 per package

229

Wt. 0.1 lbs.

Aluminum Oxide

Silicon Carbide Wet/Dry

Emery

AUTOBODY TOOLS

SANDPAPER

AUTOMOTIVE SANDERS

A) RUBBER SANDING BLOCKS 2-5/8" x 4-3/4" (SHOWN) 8161671 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 2-5/8" x 9" 8161689 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) SANDING BLOCKS ABS body with quick change spring clamps. 3-1/4" x 6-1/4" (SHOWN) 1/3 sheet. 8161697 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . 4" x 8-1/4" 1/2 sheet. 8161705 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) 9-1/4" FLEXIBLE SANDER • For sanding curved or flat surfaces • Great for wet or dry sanding 2970209 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . NON-FLEXIBLE SANDER • Wooden handle • Quick change spring clamps D) 2-3/4" x 6-3/4" 2970168 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 2-3/4" x 16" 2970170 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

Grit 40 80 120 180 240 280 240 320 400 600 60 80 150

ITEM PRICE 2970056 2923928 2923936 ¢ /ea. 2923944 2923951 2970061 2970070 2970072 ¢ /ea. 2970073 2970074 2970075 2970076 49 /ea. 2970077

89 89 1

199 SANDING SPONGES 299 Silicon carbide. 80 GRIT 8133100 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 320 GRIT 99 8133118 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

SANDING SPONGE HOLDER 99

499

Sponge not included. 8161663 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

See page 148 for pre-cut sandpaper for 2970170.

1-1/2" x 15 ft. Grit Wt. (lbs.) 60 80 120 180 240 320

BODY SHOP TOOLS DOOR SPRING TOOL

0.2 0.2 0.2 0.2 0.2 0.2

TRIM TOOLS

PISTOL GRIP CAULKING GUN

230

• Metal body and handle • O’all length: 13-1/2" 2940095 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

EMERY CLOTH ROLLS

999 1299

• Zinc coating to resist rust • Quickly and easily remove or install GM door hinge springs • Use with a 1/2" wrench 8006597 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

149 149

ITEM

PRICE

8211435 8211443 8211450 8211468 8211476 8211484

399

699

F) TRIM CLIP PLIERS Remove clips from trim pads and insulation without causing damage. 99 2990316 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . G) 10-IN-1 TRIM TOOL • Removes various autobody clips, trim, etc. • Serrated edge for panel seam clean up, plastic door clip remover, windshield moulding clip release tool, headlight spring tool, beveled edge for removing moulding, 13 mm wrench for windshield wipers, door trim clip installer, door weather strip clip remover, trim pad removing tool, and window handle removing tool 99 99 2990039 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

A) & B) Place the tool under the edge of the door trim panel and insert into the fasteners as far as possible, then simply pry up. A) DOOR TRIM REMOVER 99 2990063 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . B) DOOR TRIM REMOVER 99 2991016 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . C) WINDOW & DOOR HANDLE CLIP REMOVER Works on GM, Ford, and other models using common “C” type clips. 49 2990060 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 5 PC TRIM REMOVER SET • For removing plastic trim fasteners • Industrial grade reinforced nylon 99 8003717 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

B A

4 12

AUTOBODY TOOLS

TRIM PANEL TOOLS

PLASTIC RIVETER SET • Compact size for ease of use in confined spaces and single hand operation • Self adjusting jaws • Contains: (10 of ea.) 6.6 mm x 17.2 mm 6.3 mm x 25.2 mm 5 mm x 17.2 mm 5 mm x 15.8 mm 99 8216939 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

PLASTIC RIVETS 20 pcs. per package. 6.3 mm x 25.2 mm 8216947 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mm x 17.2 mm 8216954 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499 499

AIR BAG RELEASE TOOL • Release SIR module (airbag) retention springs on GM cars, minivans and light trucks • Heat-treated to resist bending on truck retention springs • Tips of tool are tapered to make removal easier 8222788 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

WINDSHIELD TOOLS G

F E

E) WINDSHIELD MOULDING TOOL • Can be used on most domestic vehicles • Removes clips and spreads rubber gasket on windshield 99 8002190 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . F) WINDSHIELD WIPER ARM REMOVER • Compact design offers easy access in confined spaces and eliminates risk of damage to wiper arm or surrounding paintwork • Suitable for straight or taper spline spigots with a maximum diameter of 5/8" (16 mm) 99 8002225 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . G) WINDSHIELD REMOVAL TOOL Steel pull cable makes cutting out windshields fast and easy. 99 2990067 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT BLADE 2990215 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 1.99

9 9

I H) TIGHTWIRE WINDSHIELD REMOVER Includes 6 ft. roll of cut-out wire. 2990045 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . I) 4 PC WINDSHIELD REMOVAL KIT Includes roll of windshield cut-out wire, pull handles, and wire insertion tool. 8175358 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

1799 3999

231

HYDRAULIC/BODYSHOP TOOLS

HYDRAULIC BODY & FRAME REPAIR KITS 4 TON KIT Includes: • One 4 ton hydraulic pump with swivel hose couplers and 6 ft. hydraulic hose • Hydraulic ram featuring stainless steel cylinder with extra hard finish (closed height • Lets you make collision damage repairs in half 12-1/4", extended height 17") the time of conventional pounding methods • Five 1" O.D. extension tubes (3", 5" 10", • Available in 4 and 10 ton models, and contains a 18", and 21") large assortment of the most commonly used • 5 lock pins and 3 snap-in connectors attachments, including a duckbill spreader • 1 “V” head, concave head, and rubber head • 1 ram toe, body toe, flathead, one male adapter, one hydraulic duck bill spreader (opens to 3-1/4") • Heavy duty steel box with hinged lid and double carrying handles 99 1270020 – Wt. 43.5 lbs. . . . . . . . . . . . . 10 TON KIT Similar to the 4 ton kit with the following exceptions: 10 ton hydraulic pump, ram (closed height 13-3/4", extended height 19-3/4"), four 1-1/2" O.D. extension tubes (4-1/2", 10", 15", and 21"), four lock pins, and one clamp toe. 99 1270021 – Wt. 71.7 lbs. . . . . . . . . . . . .

149

219

10 TON HYDRAULIC LIFT KIT

HYDRAULIC PUMPS

A NOTE: USE 10 TON PUMP ONLY WITH 10 TON RAM AND 4 TON PUMP WITH 4 TON RAM. DO NOT INTERCHANGE A) Oil capacity Max. pressure O’all length Wt. (lbs.) ITEM PRICE

4 TON PUMP 20 cu. in. 7,250 PSI 14-3/4" 11.6 1220987 64.99

10 TON PUMP 30 cu.in. 8,000 PSI 19" 13.7 1220995 79.99

B) AIR/HYDRAULIC PUMP • Air pressure range: 90-175 PSI • Oil capacity: 140 cu in. • Develops up to 10,000 PSI • Output port threads: 3/8", 18 NPT • Input port threads: 1/4", 18 NPT 8144958 – Wt. 21.2 lbs. . . . . . . . . . . . . . . . . .

• Large base feet on pump for extra stability • Ram cylinders are made from special seamless steel tubing with smoother, harder finish • Spring return and safety overload valve • Stroke 6", closed height 13-3/4", extended height 19-3/4" 99 1270248 – Wt. 27.5 lbs. . . . . . . . . . . . . . . . . .

169

1/2 TON DUCKBILL SPREADER

• Use with hydraulic lift kits or pumps • Widen gaps and openings, force out dents and creases, and separate parts 99 99 • Max. opening: 3-1/4" 1270022 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . .

299

HYDRAULIC RAMS E

C D

232

C D E F

Capacity 2 ton 4 ton 10 ton 10 ton

Closed Length 5-1/2" 1-3/4" 5-1/4" 13-3/4"

Extended Length 9-3/8" 2-3/8" 7-1/2" 19-3/4"

Stroke 3-7/8" 5/8" 2-1/4" 6"

Wt. (lbs) 1.9 1.8 5.1 10.7

ITEM 1200040 1200037 8184335 1202365

PRICE 24.99 24.99 49.99 79.99

For use with pull back rams or frame machines. 1250068 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PULL BACK RAMS

4999

These rams are designed to be used with our hydraulic lift kit, pumps, or our hydraulic body and frame kit. Closed Extended Stroke Wt. Cap. Length Length (lbs) ITEM PRICE 5 ton 20-1/2" 25-1/2" 5" 12.0 1200043 79.99 10 ton 22-1/2" 27-1/2" 5" 18.2 8176349 99.99

QUICK COUPLERS

6 FT HIGH PRESSURE HOSE

• To be used with pumps and rams • Fits both 4 and 10 ton models • Comes with male quick coupler • Max. pressure: 10,000 PSI 1294073 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . .

• 1/4" male NPT with swivel female coupler • Threads onto ram 99 1250008 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . • 1/4" female NPT with swivel female coupler 99 • Threads onto hose 99 1250009 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

VALVE & PISTON TOOLS A) VALVE SPRING COMPRESSOR 12-1/2" formed steel. 8003658 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) VALVE GRINDING COMPOUND • Grease mix • Aids valve grinding and sealing operations • 115 ml jar 6440005 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399 899

HYDRAULIC/BODYSHOP & PISTON TOOLS

ANGLE CLAMP

C) PISTON RING COMPRESSORS SK5 spring steel. Ring Size Height Wt. (lbs.) ITEM PRICE 1-1/2" - 3-1/2" 2" 0.4 8031293 9.99 2-1/4" - 5" 4" 0.6 8031300 11.99 3-1/2" - 7" 4" 0.7 8031319 14.99 D D) VALVE HOLDER • Allows use of compressed air to hold valves in place when servicing valve springs or seals with cylinder head on engine E • Two-step fitting for use on engines with 14 mm or 18 mm spark plugs • Uses standard 1/4" NPT air inlet fitting (not included) • Use with 8034842 (below) 99 8176364 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F E) UNIVERSAL OVERHEAD VALVE SPRING COMPRESSOR For removal of valve springs on most automotive applications without removing the cylinder head. 99 8034842 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) PISTON RING GROOVE CLEANER • Fits 2" to 6" pistons • Includes three 6-blade cutters first: 1-1/6", 5/64", 3/32", 1/8", 5/32", and 3/16"; second: 2, 2.5, 3, 4, 4.5 mm and 1/4"; third: 1.2, 1.5, 1.8, 2.8, 5.0, and 5.5 mm G 99 2990064 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) VALVE SPRING COMPRESSOR • Designed to compress valve springs on overhead valve engines • 2 adapters fits valve spring retainers up to 1-1/16" • Jaw adjustment: 1-3/8" to 5-5/8"; throat depth: 5-7/8" • Direct action compression lever gives better visibility and ease of use 8003725 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

233

VALVE & PISTON TOOLS

VALVE & PISTON TOOLS A

A) PISTON RING INSTALLER • Reduces ring breakage • Remove and install most 3/64" to 1/4" rings in passenger cars and light trucks 99 2918274 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) RING COMPRESSOR Spring clutch assures a proper fit on the piston and a positive locking action. RANGE: 2-1/8" TO 5" 99 2915205 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . RANGE: 3-1/8" TO 7" 99 2915213 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . C) SMALL ENGINE VALVE SPRING COMPRESSOR • For Briggs & Stratton, Clinton, Harley-Davidson, etc. • 2 jaw sizes for springs 3/4" to 1-1/16" 99 2918456 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . D) STONE-TYPE GLAZE BREAKER • Use with any electric or cordless drill • Range 2" to 7" • Fitted with 220 grit stones 99 2914588 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT 220 GRIT STONES 2991057 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99

15 17

D C

23 32

HYDRAULIC LIFTER REMOVER • Carbon steel with zinc-plated jaws • O’all length: 13" 8160301 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

CAMSHAFT HOLDING TOOL

• Holds the camshaft pulley to facilitate repair • Adjustable pin centres to fit many engines 99 8159808 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

DISCONNECT TOOL SETS E

E) AIR CONDITIONING/FUEL LINE DISCONNECT TOOL SET • Works on fuel line and A/C quick connect couplings found on GM, Ford and Chrysler vehicles • Sizes: 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" • 5/16" size fits push lock connectors found on Ford radiators and transmission lines 99 2990323 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . F) 9 PC DISCONNECT TOOL SET • Separates fuel, A/C & transmission line connectors on most domestic cars, trucks • Works on 5/16", 3/8", 1/2", 5/8", and 3/4" lines • Shielded versions add protection from fluid spray when disconnecting 99 2920694 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . G) 4 PC FUEL/OIL LINE DISCONNECT TOOL SET • 3 pc fuel disconnect tools: 1/4", 5/16", 3/8" • Oil cooler line disconnect tool 99 2990303 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

14 29

No sale is final until you're satisfied. 234

AUTOMOTIVE TOOLS

HOSE PINCHERS & PLIERS A A) 2 PC HOSE PINCHERS • Quick, easy way to pinch off rubber vacuum or fuel lines without damaging the line • Size: 1/2" 99 2990414 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . B) HOSE CLAMP PLIERS • Remove or install ring-type hose clamps • Locking latch securely holds clamp in position • Pliers feature angled jaws with rotating tips to grip clamps at any angle 99 2920951 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . C) 2 PC HOSE CLAMP PLIER SET • For easy removal and installation of ring type hose clamps • Swivel type jaws grip at angle to allow access in confined areas • Fingertip position lock makes it easy to lower radiator hoses • Includes 1 “V” slot jaw hose clamp plier and 1 cross slot jaw hose clamp plier 99 8158800 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . D) 4 PC HOSE PINCHER SET • Quickly and easily pinch off rubber vacuum, fuel, coolant, etc. lines • Sizes: 3/8", 1/2', 1", 1-3/4" 99 8006296 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . E) HOSE PINCH-OFF LOCKING PLIERS • Use on up to 2" diameter hose, eliminates the need to drain antifreeze when installing thermostats or water pumps on cooling systems • Swivel jaws for level clamping 99 8211641 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

14 14

OIL FILTER WRENCHES OIL FILTER WRENCH

OIL FILTER WRENCH

Range: 2-1/2" to 4-1/2". 8111320 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

FILTER WRENCHES

• Steel jaws grip filter without slipping • Fits most standard filter sizes • Use with 3/8" drive 2-1/2" to 3-1/8" 8002216 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . 3-1/8" to 3-7/8" 8031426 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . .

Wt. 0.7 lbs.

ITEM 8104945 8104952 8104960 8104978

999

OIL FILTER WRENCHES

Swivel grip allows for easy turns in tight spaces. Size 2-7/8 to 3-1/4" 3-1/2" to 3-7/8" 4-1/8" to 4-1/2" 4-3/4" to 5-3/16"

• Size range: 2-1/2 - 4-3/4 dia. • Use with 3/8" drive or 1/2" drive with included adapter 8104028 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

PRICE 5.99 5.99 5.99 7.99

1199 1399

OIL FILTER LOCKING PLIERS

OIL FILTER PLIERS

• Non-slip cushion grip handles • Approx. range: 2" to 4" 2920454 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

• Range: 2-1/8" to 4-5/8" • Nickel plated chrome vanadium steel 2990243 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . .

1299

235

FILTER WRENCHES

OIL FILTER WRENCHES STRAP WRENCHES A B

A) 6" FILTER STRAP WRENCH • Fits any spin-on oil filter up to 6" dia. • Use with 1/2" drive or 3/4" wrench 99 8068678 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . B) 2 PC STRAP WRENCH SET • Loosen, tighten, or hold any shape or material without scratching • Perfect for oil filters • Range: 0 to 4", 0 to 6-3/8" 99 8050805 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

FILTER WRENCHES C

C) “SWIVEL GRIP” OIL FILTER WRENCH • Handle swivels to clear obstructions • Stainless steel band RANGE: 2-7/8" to 3-1/4" 2919884 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . RANGE: 3-1/2" to 3-7/8" 2919876 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . RANGE: 4-1/8" to 4-1/2" 2990158 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . RANGE: 4-3/4" to 5-3/16" 2925014 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . D) “BIG RANGE” FILTER WRENCH • Fits any spin-on oil filter up to 6" dia. • Use with 1/2" drive or 3/4" wrench 2922193 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . E) STRAP WRENCH • Tensile strength of strap is 1,350 PSI • Range: 1" to 6-5/8" 2920582 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

999 999 1399 1599

999

2999

12 PC DRAIN PLUG WRENCH KEY SET • 7 hex and 4 square keys to fit drain plugs found on transmissions, gear boxes, transfer cases, differentials, etc. • Hex sizes: 3/8", 8 mm, 9 mm, 10 mm, 12 mm, 14 mm, and 17 mm • Square sizes: 5/16", 8 mm, 11 mm, and 13 mm • Use with supplied t-bar or drive with a 3/4" (19 mm) socket or wrench • Heat treated steel with rust-resistant black oxide finish 99 8220519 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FORD DIESEL FUEL FILTER WRENCH • For removal and instalation of fuel filter housing lids on the Ford Power Stroke and International Navistar Diesel engines from 1993 to 2004 • Low profile design allows for easy access 99 8172199 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 PC AUTOMOTIVE TERMINAL REMOVAL TOOLS 236

1st piece has various ends for removing terminals from harness blocks, 2nd piece is designed for Pack-Con and Weather-Pack terminals on GM vehicles. 8006462 – Wt. 0.2 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1899

A/C CONDENSER REPAIR TOOL

• Cleans and straightens condenser and evaporator fins • Use to release tension on spring loaded • 6 sided head for 8, 9, 10, 12, 14 and idler pulleys for removal and installation of 15 fin per inch application serpentine belts 8003324 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . • Extension bar for hard to reach areas • 3/8" dr. chrome vanadium sockets: 13, 15, 16, and 18 mm 99 MINI BULB PLIERS 8051658 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . .

799

SERPENTINE BELT TOOL

• Ratcheting head with freewheel position allows maximum leverage • Comes with extension for hard-to-reach idler pulleys • 8 low profile sockets (13, 14, 15, 16, 18 and 19 mm) 3/8" and 1/2" square drive 99 8221053 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . .

Removes and installs automotive mini wedge based bulbs, such as industry #37 used in Ford radios. 8182230 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

AUTOMOTIVE TOOLS

SERPENTINE BELT TOOL

699

11 PC ANTENNA & RADIO WRENCH SET

6 PC TENSIONER RETAINING PINS

• Use to hold timing belt tensioner compressed on engines that use pin-lock style tensioners • Pin Size - 0.79 mm (0.031"), 1.24 mm (0.049"), 1.37 mm (0.054"), 1.49 mm (0.059"), 1.68 mm (0.066"), 1.92 mm (0.076") • For Chevrolet, Chrysler, Ford, Dodge, Honda, Toyota, and Audi 99 8160095 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Antenna wrench designed to service Ford, GM, Chrysler, VW, Toyota and others • Chrysler and Ford radio removal tools • Code retriever for GM • 2 Torx bits: T-10 and T-15 • 3 tamper resistant Torx bits: T-7, T-10 and T-15 • Offset bit ratchet handle 99 8007113 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

A) OIL PRESSURE SWITCH SOCKET • O’all length: 2-1/8" • Two step design fits 1", 1-1/16" oil pressure sending units • Use with a 3/8" square driver or a 3/4" hex wrench 2990255 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) OXYGEN SENSOR and VACUUM SWITCH SOCKET • 7/8" sensor size • Slotted for sensor wire and vacuum port clearance • Use with a 3/8" dr. ratchet or 1" wrench 2990254 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) OXYGEN SENSOR THREAD CHASER • Cleans threads in oxygen sensor holes • Use with 3/4" hex socket or 3/8" square drive • Also works on M18 x 1.5 spark plug threads 8149593 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) OXYGEN SENSOR SOCKET 7/8" sensor size, 3/8" square drive. 2990140 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

SENSOR SOCKETS B

749 799

1299

AC VOLTAGE TESTER

• Pencil style voltage checker • Helps to locate broken wires • 50-1,000V AC • Lighted tip • Not for shielded wire 8124422 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Testing range: 12V to 600V AC • Locates breaks along live, insulated wires and power cords • Lighted tip and audible • Built-in pocket clip 99 • Includes two LR44, 1.5V batteries 8159964 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

1199

237

TESTERS

MULTIMETERS B

C D

A E

All models include batteries. A) 0700182 B) 0700249 B) 0700366 C) 0702613 DC V 0-500V 200mV-1,000V 200mV-1,000V 200mV-1,000V AC V 0-500V 200V-750V 200V-750V 200mV-700V DC A 0-25mA 200µA-10A 200µA-10A 20µA-20A AC A 20µA-20A Ω 0-1MΩ 200Ω-2,000kΩ 200Ω-2,000kΩ 200Ω-20MΩ Cont’ audible audible audible Wt. (lbs.) 0.3 0.4 0.5 0.7 PRICE 9.99 13.99 19.99 24.99

D) 0700250 E) 0700251 1V-1,000V 200mV-1,000V 1V-750V 20V-750V 20µA-20A 0.1A-1,000A 200mA-20A 200-200kΩ 200Ω-200MΩ audible audible & LED 1.1 1.3 29.99 39.99

EXTRA FEATURES: B) 0700366 – With temperature probe: -20° to 1,370°C (-4° to 2,434°F) C) 0702613 – Transistor hFE E) 0700251 – Temperature: 40° to 1,000°C (-40° to 1,832°F); Capacitance: 20µF to 2nF; Frequency: 2kHz to 20 kHz, diode, transistor hFE, logic

CIRCUIT TESTERS

72" TEST LEADS

F For multimeter 700249 & 700366. 8213365 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . For multimeter 700250. 8213407 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

399 399

CORDLESS CIRCUIT TESTER

• Checks from 6 to 24 volts • LCD display shows polarity • No ground wire or clip required • No batteries needed 8059081 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

F) CIRCUIT TESTER • Checks 6, 12 and 24 volt circuits • Tests for shorts in wiring, connectors, fuses and switches in automotive electrical systems CIRCUIT TESTER • 48" lead 99 4211093 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . G) CONTINUITY TESTER • Tests 6, 12 and 24 volt circuits, voltage regulators, fuses, switches, armatures, • Hooded probe protects fingers, distributors and appliances automatically centres the wire • Self-powered by 1 “AA” battery (not included) • Tests low voltage up to 28 volts 99 • 48" lead 99 8071706 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 4211094 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . H) CIRCUIT SOUNDER CIRCUIT TESTER/ • Utilizes flashing lights and buzzer sound to check 6, 12 and 24 volt circuits JUMPER • Tests for shorts in wiring, connectors, fuses and switches in automotive electrical systems • Heavy duty circuit • 48" lead tester for checking low 99 4211092 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . voltage up to 28 volts • Tester becomes a jumper I) CIRCUIT TESTER for powering electrical • Insulated extra long probe reaches hard to components or as a ground access circuits • Probe, handle, cord and clamp are reinforced • Checks all 6 and 12 volt systems for durability 99 • 12 ft. coiled cord 99 8221046 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . 8003317 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

999

238

B • Operating range: 0 to 50°C (32 to 122°F). • Measurement range: -60 to 500°C (-76 to 932°F) • Full range accuracy: ±1°C (± 2°F) or 2% of reading, whichever is greater • Distance: spot 12:1 • Requires two “AAA” batteries (included) 99 8104523 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

• Detects dampness in masonry, plaster and wood, which may not be visible • Good for checking surfaces before painting, papering or tiling STUD FINDER WITH A) 15% to 100% LEVEL • Uses a low to high pitch audio signal to indicate moisture level • Electronically locates • Requires 9V battery (not included) wood and metal studs 99 8003687 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . • Audible and visual indication • Bubble level for horizontal check B) 6% to 25% • Built-in marking tip to mark stud edge • Accuracy: +/- 2% • Uses 4 x 1.5V (LR44) batteries (included) • LED display 8175259 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . • Resolution: 1% • Requires 9V battery (included) 99 8105918 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . 3-IN-1 DETECTOR

TESTERS/BATTERY TOOLS

LASER THERMOMETER

MOISTURE DETECTORS

1299

DIGITAL LASER TACHOMETER

• Measuring range: 5 to 99,999 RPM • Laser light measures up to 8 m away • Accuracy: ±(0.05% + 1 digit) • Memory with recall function • 5 digit LCD display • Ergonomic ABS housing • Operates on 4 “AA” batteries (included) 8077414 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . .

• Detects studs, AC live wires, and metal • LED display and audible signal indicate stud edge and center • Automatic calibration • Requires one 9V battery (included) 8101354 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

1999

4999 ANTIFREEZE

REFLECTIVE TACHOMETER TAPE

TESTER

8162174 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . • Replacement tape for 8077414 • Qty.: 10 pcs. 8150526 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499

BATTERY FILLER

599

MEMORY SAVER • Keeps hands away from corrosive battery acid • 6" flexible spout 8064438 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

BATTERY HYDROMETER • Enables vehicle's battery to be disconnected without losing memories and settings on vehicle computer, digital clocks or radio presets • Powered by 9V battery (not included) or 12V car battery • Plugs into a conventional cigarette lighter/power adapter 99 Tests battery fluid. 8105017 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . 8064172 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

239

SPARK PLUG TOOLS

BATTERY TOOLS

A) BATTERY/TERMINAL BRUSH 99 8007435 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 4-WAY BATTERY POST/TERMINAL CLEANER Removes dirt and corrosion. 99 2990113 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . C) BATTERY TERMINAL PULLER Sharp jaws are able to engage either below or on the sides of the terminals. 99 2990250 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

1 4

SPARK PLUG TOOLS

G F

K L

D J I

O P

M N

D) 3/8" DR. SPARK PLUG SOCKETS 2911147 – 5/8" 99 2911139 – 13/16" – Wt. 0.3 lbs. . . . . . . /ea. E) SPARK PLUG WRENCH • For 5/8" and 13/16" • Long reach • Tommy bar included 99 8162067 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . F) T-HANDLE SPARK PLUG WRENCHES • Carbon steel with chrome plating • T-handle with vinyl coating • Swivel socket end 5/8" 99 8166092 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . 13/16" 99 8166100 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . G) EXTRA-LONG SPARK PLUG SOCKET • 5/8" x 4-1/2" • 3/8" dr., black finish 99 8059099 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . H) SPARK PLUG WIRE PULLER • Engages below boot to prevent wire damage • Works well on recessed plugs 99 2990146 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . I) SPARK PLUG REMOVER/INSTALLER Flexible shaft for removing and installing hard to reach plugs; turns at any angle. 99 2990025 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . J) IN-LINE SPARK PLUG TESTER • Transparent handle and indicating bulb • Tests 6 and 12 volts 99 8003334 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . .

4 4 4 4 4

240

K) SPARK PLUG HOLE THREAD CHASER • Removes carbon, corrosion, straightens thread • For 13/16" deep sockets, open end, box wrenches • For 14 and 18 mm plug holes • Tapered ends for easy starting 99 2990058 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . L) SPARK PLUG BOOT PLIERS • Long arms remove hard-to-reach spark plug boots without pulling plug lead from clip • Double insulated to protect against shock • Double dipped jaws ensure full coverage of all contact areas • Angled nose for easier access to boots 99 2990108 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . M) SPARK TESTER • Attach to spark plug wires to measure spark strength • Jaws adjust to 5 positions 99 2990221 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . N) SPARK PLUG RETHREAD KIT • Contains tap and reamer and 4 threaded inserts (3/8", 7/16", 1/2" and 3/4" long) • For 14 mm spark plugs 99 2990142 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

8 9 9

O) 4 PC SWIVEL SPARK PLUG SOCKET SET • Chrome vanadium steel 3/8" drive • Sizes: 9/16", 5/8", 3/4", 13/16" 8159790 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1999

P) 5 PC SPARK PLUG SERVICE SET • Sockets swivel and are magnetic • Chrome-vanadium steel with chrome plating • Sizes: 13/16" x 10-5/8", 13/16" x 3-3/8", 5/8" x 10-5/8", 5/8" x 3-3/8", and 9/16" x 3-3/8" 99 8160228 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

A) SPARK PLUG GAUGE & GAPPER • Tapered edge gauges and gaps all spark plug types from 0.020 to 0.100 • Specially designed hole with flange adjusts ground electrode of plug without pressuring centre electrode 99 2990489 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) IGNITION SPARK TESTER • Checks ignition spark without removing the spark plug • Works on standard and electronic ignition systems • Tool is calibrated to measure ignition voltage 99 2990056 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) DELUXE FEELER GAUGE 30 blade sizes: 0.0015" to 0.032" plus one 0.010" brass blade. 99 2990117 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D) SPARK PLUG BOOT PLIERS Two pulling positions help make removing spark plug wires a safe and easy job. 99 8222754 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) LIMITED ACCESS SPARK PLUG THREAD CHASER • Narrow profile allows access to spark plug holes in confined spaces • Use with 3/8" ratchet or extension • Size: M14 x 1.25 99 8149577 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D E

SPARK PLUG TOOLS/CLUTCH TOOLS

SPARK PLUG TOOLS

CLUTCH TOOLS

FEELER GAUGES F

I G J F) STANDARD FEELER GAUGE 30 blades sizes: 0.0015" to 0.035" plus 3" steel ruler. 8006740 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . G) CARBON STEEL FEELER GAUGES • Heat treated, polished high carbon steel • 3" length STANDARD • 15 blade sizes: 0.002" to 0.025" • 3" ruler 8059115 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . DELUXE 30 blade sizes: 0.0015" to 0.032" plus one 0.010" brass blade. 8059123 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 H) FAN CLUTCH HOLDER • Unique swivel locking head for universal operation • Prevents fan hub from rotating when removing retaining nut 99 99 8003801 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . I) GM FAN CLUTCH HOLDER • Holds water pump pulley stationary while using open end wrench to loosen fan clutch 99 • For 1996 & later GM trucks and vans • Unique design works with both 10 and 13 mm pulley bolt 99 8064479 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

7 PC 3/8" DR SPARK PLUG SOCKET

J) SAE CLUTCH ALIGNING TOOL • Shaft and bushings fit 7 pilot bearing sizes • Plate aligning cone with 1" and 1-1/8" turned diameters for automatic fit of most SAE clutch plates • Tapered cone to fit all others 99 2990100 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . • Material: chrome vanadium K) TRUCK CLUTCH ADJUSTING WRENCH • Contains: four 3/8" sockets - 9/16", 5/8", 3/4", For internal adjustment of spicer angle-spring and 13/16", universal joint 6", t-bar extension and multiple lever clutches found on most heavy duty 6" long cross bar 99 trucks. 99 8211179 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . 2920419 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

241

STEERING & SUSPENSION TOOLS

COIL SPRING COMPRESSORS

A) STRUT COIL SPRING COMPRESSOR • Compresses springs for easy strut service • U-bolts securely attach tool to spring during operation for maximum safety 99 2920186 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . B) COIL SPRING COMPRESSOR • Single unit compresses both sides of coil spring • Fits inside of the spring 99 2990132 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . C) STRUT SPRING HOOK COMPRESSOR • Hook is drop forged, heat-treated carbon steel • Screw is made from alloy steel 99 8023104 – Wt. 7.8 lbs. . . . . . . . . . . . . . . . . . . . .

B A

19 29

CV BOOT BANDER & CUTTER SET

CV BOOT CLAMP PLIERS

• CV joint banding tool with cutter • 2 pc. stainless steel banding with clips 99 8001187 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . REPLACEMENT BANDS - PKG OF 2 8001188 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 2.99

• For all ear type clamps • 1/2" drive holes allow for use with breaker bar or torque wrench 99 8160335 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

LUG NUT CAP REMOVER

2 PC 1/2" DR LOCKING WHEEL NUT REMOVER SET

• 2 socket sizes fit most locking wheel nuts • Removes damaged and stripped wheel nuts • Use with an impact wrench 8003682 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Safely removes lug nut caps from heavy duty trucks and trailers • Vinyl coated jaws won't slip off or damage the caps 8160350 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

799

FRONT WHEEL DRIVE AXLE NUT

999 SET

LUG NUT REMOVER SOCKET SET • Chrome moly with black finish 1/2 DR., 13/16", 1", 1-1/8" • Deep intertwined reverse threads for use on stripped or damaged wheel nut 8211633 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

3 PC LUG NUT SOCKET SET

• 1/2" drive chrome moly steel sockets • Includes : 29 mm (various late model GM, Ford, and Asian vehicles), 30 mm (GM A, J, and N body, plus Asian vehicles), 32 mm (late 99 model Honda and Chrysler vehicles), 34 mm (GM mid-size vehicles), 35 mm (GM vehicles), 36 mm (GM, Ford and Chrysler full-size vehicles), and 38 mm (full-size vehicles including SUVs) 99 8062242 – Wt. 11.6 lbs. . . . . . . . . . . . . . . . . . . .

• Aids in removal of damaged lugnuts • Also can be used to remove stripped nuts and bolts • Sizes: 17, 19 (3/4"), and 21 mm 8182206 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . .

INNER TIE-ROD REMOVER/INSTALLER

1999

2-IN-1 INNER TIE ROD SOCKET

242

• Steel tube with chrome moly socket end • Remove and install inner tie rods on many GM and some Chrysler prodcuts that do not have a hex inner-end nut, but use 2 flats that measure 1-7/8" across • Socket is 16" long and stepped to accept both • Can also be used on inner tie rods with 1-3/16" 1-3/16" and 1-5/16" tie rods and 1-5/16" hex size • Accomodates 1/2" dr. ratchet • Accomodates 1/2" dr. ratchet or breaker bar or breaker bar 99 99 8160061 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . 8159949 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . .

F G H

A) BALL JOINT/TIE ROD SEPARATORS Knurled handle for secure grip. BALL JOINT SEPARATOR Length: 11-7/8", opening: 15/16". 99 8051831 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . TIE ROD SEPARATOR Length: 16", opening: 11/16". 99 8051680 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . B) STEERING WHEEL LOCK PLATE REMOVER Fits domestic lock plates including tilt and telescoping columns. 99 2990128 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . C) PITMAN ARM PULLER • Fits most cars and light trucks • Opening size: 1-5/16" • Pull travel: 2-1/2" 99 8105223 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . D) UNIVERSAL TIE ROD END REMOVER • Compact design allows for use on most vehicles • Easily press out tie rod ends as well as drag links 99 8000947 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . E) BALL JOINT SEPARATOR • Heat treated carbon steel with chrome plating • Separates ball joint from spindle • Jaw design insures positive fit when removing stubborn ball joints 99 8004135 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . .

5 7 9

14 24

F) 5 PC TIE ROD/BALL JOINT SEPARATOR KIT • Includes 3 sizes of forks and 2 handles • Drop forged heavy duty chrome vanadium steel forks • One handle fits air hammer, other one for use with regular hammer 99 2990246 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . . G) TIE ROD PULLER • 2-1/2" spread, 2-1/4" reach • Chrome moly steel 99 8061848 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . H) HEAVY DUTY PITMAN ARM PULLER • Suitable for most cars and light trucks • Fully adjustable heavy-duty jaws • Max. opening: 2-1/2" • Max. throat depth: 3-3/8" • Length: 6" 99 8006971 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . I) U-JOINT REMOVER/INSTALLER Remove and replace automotive universal joints with needle-type bearings (includes GM plastic pin-type U-joints). 99 2990292 – Wt. 8.5 lbs. . . . . . . . . . . . . . . . . . . . . J) BALL JOINT/U-JOINT REMOVER/INSTALLER KIT • Removal and installation of press fit parts like ball joints, u-joints, and truck brake anchor pins • Ideal for rusted and corroded parts • Set contains a C-frame press, installation and removal adapters, plus 3 receiver tubes (2-3/4" I.D. x 3" O.D., 2-1/4" I.D. x 2-1/2" O.D., and 1-3/4" I.D. x 2" O.D.) 99 2990269 – Wt. 15.7 lbs. . . . . . . . . . . . . . . . . . . .

STEERING & SUSPENSION TOOLS

29 34

49 49

8 PC BRAKE GAUGE

• Provides accurate measurements of remaining brake lining • Steel gauges with enamel coating • Red: 2 mm (0.0787"), 3 mm (0.1181") • Yellow: 4 mm (0.1575"), 5 mm (0.1969"), 6 mm (0.2362") • Green: 8 mm (0.3150"), 10 mm (0.3937"), 12 mm (0.4724") 8103624 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

1499

No sale is final until you’re satisfied! 243

BRAKE TOOLS

BRAKE TOOLS C D E

B A) DISC BRAKE PAD SPREADER Compresses disc brake piston for easy pad installation on most domestic/import cars, and light trucks. 99 2990006 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . B) DISC BRAKE PISTON TOOL • Offers 5 drive pin configurations to fit applications on most domestic and some import vehicles • Rotates and depresses caliper pistons when changing brake pads • Use with 3/8" drive tools 49 2990062 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . C) BRAKE PISTON SPREADER • Chrome vanadium steel construction • Fits within brake caliper to push back brake pistons for brake pad installation 99 8031408 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . D) 8 PC DISC BRAKE CALIPER BIT SET • Bit sizes: 4 hex (1/4", 5/16", 3/8", 8 mm; 4 torx (T-40, T-45, T-50, and T-60) • 3/8" dr. 99 8007024 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . .

21 16

BRAKE SPRING TOOLS

G E) 9 PC DISC BRAKE CALIPER DRIVER SET

• Chrome vanadium steel sockets with nickel-chrome-moly bits • Includes: 3/8" dr. hex bits: 1/4", 3/8", 7 mm, 8 mm, 10 mm; 3/8" dr. torx bits: T-40, T-45, T-50, and 1/2" dr. torx bit: T-60 99 8160210 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . .

F) BRAKE & CLUTCH CABLE GREASE INJECTOR Hold brake and clutch cable when injecting lubrication oil. 99 8064461 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . G) DRUM BRAKE ADJUSTMENT TOOL • Different angles at ends for various models • Adjust star wheel by inserting tool through hole in backing plate 99 2922326 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

4 4

UNIVERSAL BRAKE PAD SPREADER

• Adjustable design allows for use on single or dual piston calipers • On dual piston calipers, compress both pistons at once 8172140 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . .

2499

8 PC BRAKE TOOL SET

J H) BRAKE SPRING PLIERS • Double ended tool removes and installs brake springs including springs over anchor post • Works on springs up to 3/4" dia. 99 8104705 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . I) BRAKE SPRING WASHER TOOL • Removes and installs large and small brake shoe retaining spring washers • For 5/8" to 3/4" O.D. brake springs 99 2990007 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . J) PARK BRAKE SPRING PLIERS • Use to push back spring on park brake cable • Allows for easy removal or installation of park brake cable 99 8001165 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

4 6

244

Includes: spring compressor, brake spring installer, spring removal tool, brake retaining spring tool, brake spring pliers, 2 brake adjustment spoons, and mini brake adjustment tool. 99 8003338 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . . . .

A) DISC BRAKE CALIPER BOLT SOCKET SET • Includes 3/8" and 8 mm hex bits for GM and 1/4" hex bit for Ford • 3/8" dr. 99 2990196 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) ONE-MAN BRAKE BLEEDER • Bleed brakes with no mess, includes a plastic bottle for collecting discharged fluid • Complete instructions included 99 2991081 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . C) BRAKE CYLINDER HONE • Controlled pressure makes it possible to polish or hone with just one stone grit • Range from 27/32" to 2" 99 2914596 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT STONES 2918001 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.99

BRAKE TOOLS

ONE-MAN BRAKE BLEEDER KIT

VACUUM PUMP & BRAKE BLEED KIT

• All of the necessary adapters and hoses are included to perform vacuum tests and bleed brakes on domestic and import vehicles • Test all vacuum related engine systems including emissions control systems, fuel systems, air conditioner and heater systems and other vacuum and pressure systems 99 8050832 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . .

• Magnetic pad holds bottle to frame of vehicle • Includes a variety of adapters to fit all brakes • Service calipers, wheel cylinders, and master cylinders 49 2990048 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

EXHAUST TOOLS D

E D) EXHAUST MANIFOLD SPREADER • For reinstalling exhaust manifold on a small block Chevy • An easy way to expand warped manifolds so bolt holes are accurately aligned • Helps prevent cross-threading of manifold bolts • Works best in pairs, or before removing • Capacity: 1-1/8" to 2-5/8" manifold to prevent misalignment • Ratcheting action allows for cutting 99 2990032 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . complete circumference of pipe in tight spaces • Tungsten alloy steel cutting wheel E) TAIL PIPE EXPANDERS • Zinc alloy frame 99 Straightens out clamp dents in mufflers and tail 8182198 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . pipes. CAP.: 1-3/8" TO 2-1/2" I.D. 99 8104416 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . CAP.: 2-1/8" TO 3-1/2" I.D. 99 BEARING TOOLS & PULLERS 8104424 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . .

RATCHETING EXHAUST CUTTER

14 19

BEARING PULLERS F G

F) ARMATURE BEARING PULLER • Designed to remove bearings from shaft • Fits many types of bearings including popular 6202 and 6203 • Cap.: 1/2" to 2-1/8" 99 8105272 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) 3-JAW BEARING PULLER • Compact size fits where other pullers cannot • Hook jaw on bearing inner hole to lift from its seat • Cap.: 1/2" to 2" I.D. • Ideal for automotive flywheels, pump bearings, generator bearings, machine bearings 99 8105256 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H) TWIN LEG PULLER • 1/2" female dr. with 1 cone tip, 1 flat tip, and 1 bottle of lubricating oil • Capacity: outer - 2-3/4" to 6-3/4" (70 to 170 mm) inner - 2" to 5-3/4" (50 to 145 mm) 99 2990200 – Wt. 3.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

245

BEARING TOOLS & PULLERS

STEERING WHEEL PULLER • Universal design fits most vehicles • Removes gears and pulleys 2919652 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

BEARING PULLERS

A) LONG JAW BEARING PULLER • Chrome moly steel construction • 3 position 12" long jaws adjustable to 6", 8" and 10" lengths • 3-7/8" screw extension • 3/8" to 2" wide bearing capacity 99 8175275 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 4-IN-1 PULLER SET • Chrome moly steel • Can be assembled as a 2 or 3 jaw gear puller with reversible jaws • Standard - max. reach: 5"; max. spread: 10-1/2" • Long - max. reach: 8-3/4"; max. spread: 11" 99 8004346 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) BLIND HOLE BEARING PULLER SET • Includes: 15" shaft, 2.2 lb hammer, and 8 adapters • Adapter sizes (fits bearing ID): 8 mm: 5/16"to 13/32"(8-10 mm), 10 mm: 13/32"to 15/32"(10-12 mm), 12 mm: 15/32"to 9/16"(12-14 mm), 15 mm: 19/32"to 11/16"(15-17 mm), 17 mm: 11/16"to 25/32"(17-20 mm). 20 mm: 25/32"to 15/16"(20-24 mm), and 25 mm: 1"to 1-1/8"(25-29 mm) 8104036 – Wt. 8.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BEARING & SEAL TOOLS D) BUSHING DRIVER SET • Comes with 3 driver handles • Sixteen 2-step bushing insertion collars (from 3/8" x 7/16" to 1-1/4" x 1-3/8") 99 3411220 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . E) SEAL DRIVER SET Contains 16 plastic adapters for up to 3-3/8" dia. seals. 99 2920260 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . F) 7 PC BEARING DRIVER SET • Durable reinforced nylon driver discs will not damage bearing surfaces • Includes knurled aluminum handle and 6 driver discs: 1-1/2", 1-3/4", 2", 2-5/16" x 2-1/2", and 2-9/16" x 2-27/32" (39.5, 44.5, 50, 59 x 63, and 65 x 72 mm) 99 8175317 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . G) PNEUMATIC BEARING RACE & SEAL DRIVER SET • 11 drivers, sizes: 1-9/16", 1-3/4", 1-15/16", 2-5/16", 2-1/2, 2-13/16", 3", 2-15/32", 4-5/8", 3-13/16", and 3-3/16" • Includes hammer handle and pneumatic handle for air hammer 99 8175309 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . . . . .

SEAL TOOLS H) SEAL PULLER • Insert tool tip behind grease/oil seal pry out and pull • 2 tips accommodate most applications 99 2990539 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . I) 2 PC SEAL PULLER SET • Ideal tool for all seals where shaft cannot easily be removed • A few hammer taps on tool back removes seals 99 8003574 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . .

246

12999

B) UNIVERSAL BEARING PACKER • Simply place the bearing between the plastic cones, tighten, and apply grease through the fitting on the end of threaded shaft A C • Forces out old grease to evenly inject new grease • Cone dia.: 5" 99 2928042 – Wt. 0.3 lbs. . . . . . . . . . . . . . C) BEARING RACE and SEAL DRIVER A) BEARING PACKER • Helps reduce damage to both race and • Use with either air or hand-operated grease guns axle housing • Bearing cap.: min. 3/8" I.D., max. 4" O.D. • 6 disc sizes fit most bearing race sizes • Working height between cones: 0 to 2" 99 • Turn discs over to drive seals 99 8167793 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 2918514 – Wt. 1.6 lbs. . . . . . . . . . . . . . B

PULLERS

D) 3 PC REAR AXLE BEARING PULLER • Quickly removes semi-floating rear axle bearings • Fits standard slide hammers • 3 pullers fit I.D.s of 1" to 1-7/8", 1-5/16" to 2-3/8", and 1-3/8" to 2-7/8" 99 8034824 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . E) SLIDE HAMMER KIT • 22" long with 5 lb. weight • Includes: 2 and 3 jaw internal and external gear puller, bearing and oil seal puller hook, dent puller hook, rear axle puller, hub puller, plier adapter and case 99 2990136 – Wt. 16.5 lbs. . . . . . . . . . . . . . . . . . . . . .

BEARING TOOLS & PULLERS

BEARING TOOLS

BEARING SEPARATORS F) BEARING SEPARATOR • Knife-like edge grips gears, bearings, etc. • For spaces that puller jaws can't be hooked on • Cap.: 1/2" to 3" 99 2990103 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) BEARING SEPARATOR / PULLER SET • Remove gears and bearings standard gear puller jaws can't get behind • Also pulls timing gears and other parts with tapped holes • Cap.: 1-1/4" to 2" dia. • Chrome moly steel 99 8074031 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . H) MINI BEARING PULLER/SEPARATOR KIT • Suitable for removal of small bearings, gears, wheels, and fittings from shafts • Bearing separator capacity: 3/8" to 1-3/16" • Bearing puller capacity: 2" max dia. • Chrome moly components ensure long tool life 99 8159857 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I) BEARING PULLER/SEPARATOR • Includes: 2" and 3" splitters • 4 sets of hex push-puller legs and a bar-type puller head with a 9/16" torquing screw • 5" puller cross-bar with a 6-1/4" torquing screw • Each bearing separator may be used separately or in a combination with other pullers 99 8160483 – Wt. 10.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BOLT-TYPE PULLER KITS

46 PC KIT (SHOWN) Includes: 12 different bolt sizes, 3 pressure screw adapters, yoke, and washers. 99 2923480 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . 37 PC DELUXE KIT • Designed for use on harmonic balancers, crank shaft pulleys, steering wheels, and gear pulleys • Can be used on tapped hole or flywheel on electric and 2 cycle motors • Centre yoke is made of chrome moly for added strength and durability 99 99 2990314 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . .

13 PC KIT Includes: 4 different bolt sizes, yoke, and pressure screw with pointed adapter. 2923019 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . .

247

BEARING TOOLS & PULLERS/DIAGNOSTIC TOOLS

PULLERS

A) STEERING WHEEL PULLER • Universal puller for most makes and models • Screw pad protects end of steering shaft 99 2990199 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . B) HARMONIC BALANCER PULLER Remove balancer without damaging pulley or shaft. 99 2918050 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . .

19 29

POWER STEERING / ALTERNATOR PULLEY PULLERS E C

GEAR PULLERS • Inside and outside reversible jaws • Ideal for pulling gears, pulleys, and flywheels • Chrome vanadium steel construction

C) ADJUSTABLE JAW PULLEY PULLER • Removes pressed on 1 or 2 groove alternator or power steering pulleys 2 JAW PULLERS • Designed to allow jaws to be moved into Wt. Size (lbs.) ITEM 2 positions for most sizes of pulleys 99 2920143 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . 3" 1.0 8046009 D) PULLEY PULLER 4" 1.7 8046018 • For Chrysler, Ford, GM, and VW vehicles 6" 4.0 8046027 • Also works on GM belt driven vacuum pumps 8" 8.7 8046036 on both gas and diesel powered vehicles • Fits pulleys with hub dia. of 1-1/8", 1-1/4", 3 JAW PULLERS 1-5/16", and 1-3/8" • Split collet design jaws grip the pulley flange Size Wt. ITEM (lbs.) for damage-free removal 99 3" 1.3 8045965 2990259 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . 4" 2.6 8045974 E) PULLEY PULLER/INSTALLER 6" 4.1 8045983 Remove/install power steering 8" 9.0 8045992 and alternator pulleys on GM, Ford and Chrysler engines. 99 2990177 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . .

PRICE 9.99 12.99 19.99 34.99

PRICE 11.99 16.99 24.99 39.99

DIAGNOSTIC TOOLS REMOTE STARTER SWITCH

TIMING LIGHT

Crank the engine from under the hood. 4230067 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

DISTRIBUTOR CLAMP WRENCH SET

248

• Works on all 12V gasoline engines • Non-conductive plastic case • Includes advance timing feature 8000943 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

• 1/2" and 9/16" wrench openings fit most American made distributor clamps • Use assembled or individually with 3/8" dr. ratchet 99 2990070 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

A) VACUUM/FUEL PRESSURE TESTER • Measures 0 to 10 PSI (0 to 700 g/cm2) on mechanical fuel pump systems • Vacuum range: 0 to 30 in-Hg (0 to 700 mm-Hg) • Flexible hose and fitting included 99 4230070 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) ENGINE COMPRESSION TESTER • 2-1/4" dia. gauge reads 0 to 300 PSI, 0 to 20 kg/cm2, or 0 to 20 bar • 10" flexible hose • Fits 14 mm and 18 mm spark plugs 99 4230071 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) DIGITAL ENGINE COMPRESSION TESTER • Includes gauge, 18" flexible hose and 2 adapter extensions • Gauge includes quick coupler for easy hose connection and a rubber boot for protection against bumps and drops • Gauge reads 0 - 300 PSI • Hose has stepped adapter to fit both 14 mm and 18 mm spark plug thread • 14 mm and 18 mm adapter extensions • Auto Power-off after 3 minutes 99 8214082 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) CYLINDER LEAKAGE TESTER • Cylinder leakage testing accurately targets the causes of low compression • Specifically pinpoints problems for a more accurate engine diagnosis, quickly spotting bad valves, worn rings, cracked cylinder heads, and blown gaskets • Takes over where compression gauges leave off • Easy-to-use, works from shop air line • Combination 14 & 18 mm adapter, fits most engines 99 4230769 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DIAGNOSTIC TOOLS

COMPRESSION TOOLS

STETHOSCOPES

E) MECHANIC'S STETHOSCOPE • Provides a fast and easy way to locate noises in engines, bearings or other moving parts • Aluminum alloy probe/needle for finding exact location of specific noises • Rubber trumpet for checking vacuum and pressure flow • Useful for synchronizing multi-carburators 99 8006622 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) MECHANIC'S STETHOSCOPE Pinpoints source of noise in engines, transmissions, differentials and bearings. 99 2918266 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 19

8 PC ELECTRONIC FUEL INJECTION TEST LIGHT SET

CARBURETOR ADJUSTING TOOL

• Quickly and easily test electronic fuel injection • 10" flexible shaft for hard-to-reach locations systems on: GM TBI, GM PFI, Bosch PFI, • 5 quick change bits: double D, 1/4" female hex, Geo TBI, Ford TBI, and GM SCPI equipped 4.5 mm female hex, 3/32"(2.38 mm) male hex, vehicles and 2.5 mm male hex with magnetic bit holder • 6 noid lights, 2 IAC signal test lights • Handle stores tips 99 99 8014007 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . 2990121 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

18" FIBRE OPTIC SCOPE

VACUUM PUMP KIT

• See inside walls, drains, vents and engines • 3/8" dia., 18" long fibre optic cable is flexible • For testing vacuum for a wide field of view operated components • Bright xenon bulb illuminates dark areas • Pump is made of one • 7,400 pixel resolution piece die-cast material for added durability • Includes detailed, illustrated manual for vacuum • Runs on 2 “AA” batteries (included) • Includes 2 spare xenon bulbs testing 99 99 8174310 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . 2928836 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

349

249

CODE READERS

CODE READERS MODEL GS500

OBD II CODE READERS MODEL MS409 MODEL GS300

MODEL MS309

• Works with all 1996 and newer OBDII compliant US, European and Asian vehicles • Easy to read backlit LCD display • Easy to use, specifically designed for the Do-it-Yourselfer • All models include User Manual and CD with code definitions (MS309 does not include CD) GS300 MS309 MS409 GS500 (8119877) (8217853) (8218133) (8193203) • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Global OBDII CAN Capable OBDII Generic & Pending DTC's Manufacturer Specific DTC's On-Screen DTC Definitions Determine MIL Status (Check Engine Light) I/M Readiness Status Freeze Frame Data Clears codes, resets monitors and turns off MIL (Check Engine Light) Retrieves Vehicle Information (VIN, CIN/CID and CVN) Battery/Memory Backup Multilingual Support (English, French, Spanish, German and Dutch) Built-in DTC Lookup Internet Updatable (via included USB cable) Reads live PCM Datastream Displays live O2 sensor test data

VIN ONLY

•

• •

• • •

• • • •

Wt. (lbs.)

0.7

0.6

2.1

1.9

PRICE

69.99

99.99

199.99

279.99

OBD - On-Board Diagnostics CAN - Controller Area Network MIL - Malfunction Indicator Lamp (Check Engine Light) I/M - Inspection/Maintenance PCM - Powertrain Control Module

VIN - Vehicle Identification Number CIN - Calibration Identification Number (Also referred to as CID - Calibration ID) CVN - Calibration Verification Number O2 - Oxygen

OBD II MANUAL • Covers 2nd generation On-Board Diagnostic (OBD II) Engine • Management Systems used on 1996 and newer cars & trucks • Assists in diagnosing and repairing problems when "check engine" light is on • Includes a comprehensive trouble codes list 99 8153538 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TECH TIPS

250

As it relates to the Automotive industry, OBD is a generic term meaning On-Board Diagnostics. It was the name given to early emission control and engine-management systems first appearing in the early 80’s. There was no single OBD standard then with each manufacturer generally using their own system. By 1996 Federal requirements mandated a common system. Most cars sold in the US and Canada from 1996 use an OBDII system. A notable exception is VW and Audi. European cars, 2001 and newer, use a system called EOBD (European On-Board Diagnostics) which is essentially the European equivalent of the North American OBDII system. Regardless of which system is used, each monitors and stores information from various sensors throughout the vehicle. Examples would be a Mass Airflow Sensor, Oxygen sensor, EGR position sensor as well as others. Sensor values outside an acceptable range trigger a Diagnostic Trouble Code (DTC). Code readers as those above read and interpret the codes and some, such as 8193203, have the ability to also read live sensor output.

TECHBOOK SERIES – Wt. 0.9 lbs. . . . . . . . 2299/ea. Manual Description Information Covered GM & FORD This comprehensive manual covers maintenance, repair and overhaul on GM 350 and 379 cu. in (5.7 and 6.2 L), and Ford 420, 445 cu. in. DIESEL ENGINE REPAIR MANUAL (6.9, 7.3 and 7.3 L Power Stroke) engines. AUTOMOTIVE Covers basic electrical fundamentals, troubleshooting, and repair for both domestic and foreign vehicles. Includes engine starting and ELECTRICAL charging systems, lights, gauges, and accessories. MANUAL AUTOMOTIVE A complete photographic guide showing car care and detailing, rust prevention as well as body repair and painting - from minor dents to BODY REPAIR & PAINTING MANUAL major structural damage.

ITEM

MANUALS

4490026 4490017 4490020

• Step-by-step procedures and hundreds of easy-to-follow photos • Written from “hands-on” experience using common tools • Detailed wiring diagrams

FORD

DODGE

CHEVROLET

REPAIR MANUALS – Wt. 1.2 lbs. . . . . . . . . . . . . . . 2299/ea. Chevrolet & GMC Pickups (’67 thru ’87)

All full-size Chevrolet & GMC In-line 6-cyl., 4.3 L V6 and V8 gasoline engines 2-wheel drive & 4-wheel drive. Pickups (’67 to ’87), Blazer, Jimmy, & Suburban (’67 to ’91)

4490090

Chevrolet & GMC Pickups (’88 thru ’00)

All Chevrolet & GMC full-size (C & K) gasoline models Pickups (’88 to ’00), Blazer & Jimmy (’92 to ’94), Suburban (’92 to ’98), Tahoe & Yukon (’98)

4490027

Silverado, Sierra, Suburban, Tahoe, & Yukon

Chevrolet Silverado & GMC Sierra Pick-ups, 1999 thru 2002, Chevrolet Suburban & Tahoe 2000 thru 2002, GMC Yukon & Yukon XL 2000 thru 2002. Does not include C/K Classic, diesel, 8.1L engine or heavy duty model information

8007396

Pick Ups (’94 thru ’01)

All Dodge full-size pick-ups, gasoline and Cummins turbo-diesel engines

4490060

Pick Ups (’02 thru ’05)

Dodge pick-ups, gasoline and Cummins turbo-diesel engines

8153405

Pickups & Bronco (’83 thru ’96)

All Ford Full-size pickups F-100 thru F-350 and Bronco 6-cyl. & V8 engines (’80 to ’96)

4490028

Pickups (’97 thru ’03)

All Ford pickups, Expedition, Navigator, 2WD and 4WD gasoline models

8153504

Ranger Pickups All Ford Ranger pickups 1993 thru 2005, including Mazda B2300, B3300, B4000, 1994 thru 2005 (’93 - ’05)

8153520

AUTOMOTIVE TOOLS MANUAL

AUTOMOTIVE REFERENCE MANUAL

• Illustrated glossary with automotive words, terms, and abbreviations • Buyer's guide with hundreds of the latest tools for • Includes decoding VIN numbers, emergency home mechanics and how to use them repairs, jump starting, and towing • Learn how to repair damaged threads, remove • Manufacturer's recall, service bulletin and broken fasteners, trace electrical shorts, etc. warranty information 99 8187619 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . • Routine maintenance guide, emissions and safety test preperation 99 8187627 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . FORD SUPER DUTY

REPAIR MANUAL

ATV BASICS MANUAL

• Step-by-step procedures and hundreds of easy-to-follow photos Information on cleaning and • Written from “hands-on” protecting your ATV, accessorizing, experience using common tools buying a quality ATV, riding safely • Detailed wiring diagrams and properly, basic troubleshooting and • Covers models: 99 thru 06 Ford Super Duty maintenance, long-term storage, and tools and F-250 and F-350 Pick-ups and Excursion 99 equipment. 99 8187635 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . 8187643 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

251

TUBING & PIPE TOOLS

TUBE CUTTER

TUBE CUTTERS B

A) MINI TUBE CUTTER • Cap.: 1/8" to 5/8" • Ideal for working in confined spaces 8027155 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . B) 2 PC TUBING & PIPE CUTTER • Large cutter cap.: 1/8" to 1-1/8" with deburring point • Mini cutter cap.: 1/8" to 5/8" 8027182 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . C) RATCHETING TUBE CUTTER Cap.: 5/16" to 1-1/8". 8045215 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . .

399 999

• For copper or aluminum pipe • Spring loaded cutting wheel automatically tightens against pipe without need for adjustment 1/2" 99 8173346 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . 3/4" 99 8160293 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . .

11 12

TUBING & PIPE TOOL KITS

HOSE CUTTERS

J E

D D) 9" HOSE CUTTER • Cap.: 1/2" x 1-1/4" dia. • Reinforced nylon handle 8020054 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . E) 9-1/2" HEAVY DUTY HOSE CUTTER • Large cutter cap.: 2" • Heat treated carbon steel blade 8004406 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . .

799 K

1199

PVC PIPE CUTTERS G

J) DOUBLE FLARE TOOL KIT • Mini tube cutter cap.: 1/8" to 5/8" • 3/16", 1/4", 5/16", 7/16", 1/2", and 5/8" dies • Flaring tool, deburring tool, and carrying case 99 2990245 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . .

REPLACEMENT DIES FOR #2990245 99 /ea. Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/16" – 8056284 5/16" – 8056319 1/4" – 8056293 3/8" – 8056337

H F) 1-1/4" RATCHETING PVC PIPE CUTTER • Cap.: 1-1/4" dia. (max.) • Aluminum housing 99 8020063 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . G) HEAVY DUTY PVC PIPE CUTTER • Max. capacity: 1-3/8" dia. • Aluminum body • High carbon steel blade • Includes jaw insert for complete cuts on small dia. pipe 99 8175283 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . H) PISTOL GRIP RATCHETING PVC PIPE CUTTER • Stainless steel cutting blade • Quick release button • 1-5/8" max. capacity 99 8193120 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . I) PVC PIPE CUTTER • For cutting PVC, plastic or thin-wall aluminum pipe • Max. cutting diameter of 2-1/2" 99 8193138 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . .

K) 6 PC TUBING TOOL KIT • Cuts 1/8" to 1-1/8" tubing • Built-in deburring tool • Benders for 3/16", 1/4", and 3/8" tubing • 45° flaring tool fits 3/16" - 5/8" tubing 2920890 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . .

3499

METRIC BUBBLE (ISO) FLARING TOOL KIT

252

• Designed for soft steel brake lines where an “ISO” or bubble style flare is required • Includes yoke assembly, flaring bar, gauge wrench, and 4 adapters (4.75, 6, 8, and 10 mm) • 4.75 mm adapter also suitable for standard 3/16" brake line 99 8056417 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . .

B C

A B) TUBING BENDER • Bender has calibrated markings for 0° to 180° • Sizes: 1/4", 5/16", and 3/8" 99 2910677 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . A) 3 PC SPRING TUBING BENDER SET C) TUBE BENDING PLIERS • Eliminate crimping and collapsing of copper • For copper and steel tubing and other thin wall tubing • Sizes: 1/4", 5/16", and 1/2" 99 99 • Fits 3/16", 1/4", 5/16", and 3/8" 2920119 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . 8019958 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

11 14

TUBING BENDER

• Aluminum die zinc alloy bending guide • Steel handle with zinc alloy rubber grip • For 1/2" O.D. tube 8161002 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . .

• Bends standard 1/2" and 3/4" copper tube or other thin wall tubing 5/8" and 7/8" O.D. 99 • Steel tube handles with aluminum guide 8160269 – Wt. 10.3 lbs. . . . . . . . . . . . . . . . . . . .

TUBE CLEANING BRUSH

TUBING & PIPE TOOLS

TUBING BENDERS

6999

PIPE WRENCHES

• Non-slip rubber grip for improved handling • Detaches in middle for use in confined spaces • Internal and external wire brushes in sturdy ABS housing • For 1/2" and 3/4" copper or aluminum tubing 99 8160285 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Max. Length Opening 6" 3/4" 8" 1-1/4" 10" 1-3/4" 12" 2" 14" 2-3/4" 18" 3" 24" 3-1/4" 36" 4-1/2" 48" 5" ALUMINUM 99 Max. Length Opening 14" 3" 18" 3-1/2" 24" 4" 36" 4-1/2"

DEBURRING TOOL Deburring and marking tool with replacement blade. 2970911 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

GENERAL PURPOSE CARBON STEEL REAMERS

• Ream, deburr, align,and enlarge holes • T-handle makes turning easy • Always turn clock-wise • Use of cutting oil is recommended 1/8" to 1/2" (3 to 13 mm) CAPACITY 8016924 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 5/32" to 1-7/32" (4 to 31 mm) CAPACITY 8006158 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

599 1499

POWERFIST We proudly supply you with Powerfist products, which have a proven reliability and great value,

Only available at Princess Auto!

CAST IRON Wt. (lbs.) 0.6 0.9

1.5 2.2 3.1 4.8 7.2 14.2 23.6 Wt. (lbs.) 2.4 3.8 6.0 8.2

ITEM

PRICE

8211153 8154023 2926426 2922011 2924579 2924603 2921914 2921922 2920456

4.99 5.99 7.99 9.99 12.99 16.99 21.99 49.99 64.99

ITEM

PRICE

8053768 8050896 8053786 8053795

16.99 24.99 29.99 59.99

12" CHAIN PIPE WRENCH

• Chain length: 16" • For use on pipe up to 4" dia. 8002186 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . .

2299

18" HEAVY DUTY OFFSET PIPE WRENCH • Offset wrench for unique pipe fitting situations • 2-1/2" capacity 8003748 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . . .

2499

253

TUBING & PIPE TOOLS/TAPE MEASURES

2 PC MASTER WRENCH SET Includes: 8" (cap. 7/16" to 7/8", 10 to 22 mm), 11" (cap 11/16" to 1-1/4", 17 to 32 mm). 8062176 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

PIPE THREADERS A) RATCHETING PIPE THREADER Includes dies for 1/4", 3/8", 1/2", 3/4", 1". 99 2910019 – Wt. 13.2 lbs. . . . . . . . . . . . . . . . . . . . B) HEAVY DUTY RATCHETING PIPE THREADER • Ratchet handle with 5 dies • Thread sizes: 3/8", 1/2", 3/4", 1", and 1-1/4" NPT 99 2910162 – Wt. 17.2 lbs. . . . . . . . . . . . . . . . . . . .

69 99

TUB DRAIN REMOVER

PLUMBING TOOLS 25 FT PLUMBING SNAKE

• Insert end of remover into tub drain and use adjustable wrench or heavy duty screwdriver to turn remover and remove tub drain • Die-cast aluminum 99 8160046 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

WASH BASIN WRENCH 25 ft. x 1/4" high carbon steel wire. 8126187 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . .

1199 For those hard to reach basin lock nuts. 8171241 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

WASH BASIN/FAUCET WRENCH

799

LOCK NUT WRENCH • Multi-fit wrench fits various size basins, faucets and piping nuts • 90° offset ends fit in tight spaces 8201675 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

• For sink strainer lock nut • Adjust diameter of lock nut wrench by applying pressure to hinged jaw 99 8160020 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . .

TAPE MEASURES

999 D

Features: Tough ABS case with non-slip rubber case jacket for improved handling, thumb blade lock, belt clip, and 16" stud markings. Style Stand Out Wt. (lbs.) ITEM PRICE 16 ft. x 3/4" SAE 5 ft. 0.4 8051010 3.49 25 ft. x 1" SAE EZ Read 7 ft. 0.8 8050976 5.49 C 33 ft. x 1-1.4" SAE 9 ft. 1.4 8050949 9.99 12 ft. x 5/8" SAE/Metric 4 ft. 0.3 8051083 2.99 25 ft. x 1" SAE/Metric 7 ft. 0.8 8050985 5.49 D 33 ft. x 1-1/4" SAE/Metric 9 ft. 1.6 8050967 9.99

FLEXIBLE MAGNETIC TAPE MEASURE 254

• SAE/metric • 36" (1 metre) x 1" wide 8079212 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

• Automatic self locking tape measure • Push button allows smooth blade retraction • Ergonomically designed rubber casing A) 16 FT x 1" (SAE) 99 8088031 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Nylon coated blade for maximum durability • Classic chrome plating with impact resistant rubberized case B) 25 FT x 1" (SAE) 99 8113946 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) ROLL-A-BLADE TAPE MEASURE • 25 ft. x 1" SAE • One hand operation • Use as a standard self-locking tape measure or automatically extend blade by rolling tape • Nylon coated blade for extended durability 99 8142374 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TAPE MEASURES

SELF-LOCKING TAPE MEASURES A

25 FT x 1" SAE STAINLESS STEEL TAPE MEASURE

• All metallic components are stainless steel to resist rust • Blade can be rinsed off with water making tape ideal for concrete and tile work or other dusty environments • Dual end hook and blade numbered on both sides adds measuring versatility • Nylon coated blade for increased durability 99 8142382 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

SAE/METRIC OPEN REEL TAPE MEASURE

FAST REWIND OPEN REEL TAPE MEASURE

• 100 ft. open reel tape • 3:1 high speed gear for fast rewind • Cushioned shock absorbing bumper • Double nylon coated blade 8113888 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . .

1/2" wide fibreglass tape with SAE markings on one side and MM on the other. 100 FT./30 M 99 8051145 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . 165 FT./50 M 99 8051154 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . 99 330 FT./100 M 99 8168072 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . .

Louise Beaudry is a special person who was always there to talk to, was a good listener, and was there when you needed advice. Louise worked at Shur-Lift as Bob Tallman’s Assistant, and from there went on to Princess Auto to do many tasks for the Team Leaders. She retired a few years ago, and has enjoyed both her working career and her home life.

9 14 29

255

MEASURING TOOLS

MEASURING WHEELS

A) 5-5/8" MEASURING WHEEL • 3-digit feet and-2 digit inch counter with reset button • Lightweight aluminum handle extends to 26-1/4" • Rubber wheel on PVC rim • 1,000 ft. counter 99 8187841 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 7-3/4" MEASURING WHEEL • 5-digit indicator measures up to 9,999 ft. 11" • Telescoping handle can be extended from 12" to 35" • Compact and lightweight for easy handling • Push button reset 99 8145153 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C) 6" WHEEL with DIGITAL READOUT • Easy conversion between SAE and metric in large LCD display on handle for easier viewing • 6" wheel and telescoping handle • Includes stand 99 8157539 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

For threading electrical wire, telephone wire, cable, etc., in limited access areas. 50 FT. (15 M) 8206674 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . 100 FT (30 M) 8206682 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . .

• Useful for all types of alignment jobs • Multiple attachment methods including a steel pin and adjustable hook 99 8105694 – Wt. 1.4 lbs. . . . . . . . .

CHALK LINES

G F

256

FISH TAPE

PLUMB BOB

D) 12-1/2" WHEEL • 5 digit counter • 99.4% accuracy (smooth surface) • Ergonomic pistol grip handle with trigger brake and counter reset knob • Folding handle for easy transport • Dirt scraper and kick stand SAE Measures up to 9,999 ft. 11". 99 8044828 – Wt. 6.2 lbs. . . . . . . . METRIC Measures up to 9,999 m. 99 8086852 – Wt. 6.1 lbs. . . . . . .

1499 1999

E) 100 FT with FINGER GRIP Chalk not included. 2970249 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . F) 100 FT (30 M) CHALK LINE • Contractor quality, durable zinc housing • Self-chalking easy-action reel 8045023 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . G) 8 OZ REPLACEMENT CHALK

399 679

Wt. 0.6 lbs.

2970121 – RED 2970122 – BLUE . . . . . . . . . . . . . . . . . . . . 1.99/ea.

Need that item but you haven’t got time to shop in-store?

Give us a call! Phone and Fax orders are accepted at all locations or phone us toll free:

1-800-665-8685 SQUARES

• Measure angles up to 220° • Large, easy to read LCD display • Includes one 9V battery 8145021 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . .

4999

COMBINATION SQUARES A

A) POCKET SIZE COMBINATION SQUARE • Die-cast zinc body with solid brass hardware • 6" ruler with level and scriber 99 2940089 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 12" COMBINATION SQUARE • 12"/300 mm stainless steel ruler • Aluminum frame with level and scriber 99 8044252 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . C) PROFESSIONAL COMBINATION SQUARE • Use for making accurate 45° and 90° markings, measuring, and checking depth • Aluminum frame with level and hardened scriber for fast and accurate marking • 12" satin steel blade 99 2944320 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

MEASURING TOOLS/LEVELS

DIGITAL ANGLE FINDER

SQUARES

TRIANGLE SQUARES

D H

D) 12" x 8" STEEL UTILITY SQUARE 2940090 – Wt. 0.6 lbs. . . . . . . . . . . . . . . E) STEEL TRADESMAN SQUARE 24" x 2" body, 16" x 1-1/2" tongue. 2944346 – Wt. 1.7 lbs. . . . . . . . . . . . . . . F) 24" x 16" STEEL RAFTER SQUARE Yellow enamel finish with black markings. 2940093 – Wt. 1.9 lbs. . . . . . . . . . . . .

499 999

1499

POWERFIST

G) ALUMINUM TRIANGLE SQUARE Measures: 7-1/4" x 7-1/4" x 10-1/4". 2921468 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . H) POLY TRIANGLE SQUARE • Orange colour makes it easy to find • Built-in level • O’all dim.: 7-1/4" x 7-1/4" x 10-1/4" 2940105 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . I) ALUMINUM TRIANGLE SQUARE • Use as a 45° or 90° saw angle guide • Cut any angle • O’all dim.: 7-1/4" x 7-1/4" x 10-1/4" 2940086 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . J) 12" POLYSQUARE™ • Fraction conversion table • Rafter cutting guide • Can be used for marking 45° and 90° angles, and as a saw guide • O’all dim.: 12" x 12" x 17" 2940061 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

389 399

1399

We proudly supply you with Powerfist products, which have a proven reliability and great value, Only available at Princess Auto!

1299

257

LEVELS

18" LASER LEVEL

A) LINE and SURFACE LEVEL • Vertical and horizontal vials 2944940 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . • Metal housing • 328 ft. (100 m) max. range B) 24" MAGNETIC UNITEK™ LEVEL • Magnet attaches to any ferrous metal surface • Solid I-beam aluminum frame • Requires 2 “AAA” batteries • Shock resistant end caps (not included) 99 • Top read window 2940137 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . 2944296 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

249

2199

LEVELS C F G H

F) POLY LEVELS • Metal edge C) CROSS CHECK LEVEL • Has vials for vertical, horizontal, and 45° angle • Screw holes for easy mounting on tools and 24" LONG work surfaces 99 2940142 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . • Has 2 vials at right angles to each other • O’all dim.: 2-3/8" x 1-3/4" x 1/2" ¢ 48" LONG 99 2940071 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 2940143 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . D) 4" LEVEL G) 24" TOP READ MAGNETIC LEVEL • 2-vial level with magnetic base • Top reading window • O’all dim.: 4" x 1-3/4" x 3/4" 99 • Aluminum construction 99 2940139 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 8007471 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . E) 9" TORPEDO LEVEL H) 78" ALUMINUM LEVEL V-groove magnet attaches to pipes, etc. 99 Top read vial. 99 2940141 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 8016871 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . .

RULERS

9 14

SLIDING BEVELS

I J

I) 6" METAL POCKET RULER 2940526 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J) 12" STEEL RULER • SAE and metric • Black lettering on stainless steel • Back of ruler has conversion table for converting inches to metric, fractions to decimal, Whitworth to UNF, and tap drill chart 2940067 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K) YARDSTICK • Yellow enamel finish steel with black markings • SAE and metric 2940092 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

99¢ M • Set at any angle • Stainless steel blade with leveling vial 99 L) 8" SLIDING BEVEL 49 8043182 – Wt. 0.3 lbs. . . . . . . . . . . M) 8" SLIDING BEVEL With SAE and metric scale 99 on blade. 99 2940091 – Wt. 0.2 lbs. . . . . . . . . . .

METAL T-SQUARE

258

24" x 48". 8016988 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

MICROMETERS A

D) INSIDE B C) OUTSIDE

• Complete with locking lever and ratchet • Graduated to 0.0001" A) 1" OUTSIDE - 0 to 1" 2940393 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . B) OUTSIDE - 1 to 2" 8009567 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . OUTSIDE - 2" to 3" 8156044 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . OUTSIDE - 3" to 4" 8156051 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

1799 1999 2299 2799

E) DIVIDER

O’all Range Length 7" 0 to 6" C 13" 0 to 12" 7" 1/2" to 7-1/4" D 13" 3/4" to 13" 8" 0 to 6-1/4" E 14" 0 to 12-7/8"

Wt. (lbs.) ITEM PRICE 0.2 2940025 2.99 0.4 2940044 4.99 0.2 2940024 2.99 0.4 2940043 4.99 0.2 2940042 2.99 0.5 2940045 4.99

3 PC 9" DIVIDER and CALIPER SET Inside and outside calipers, plus divider. 2940260 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

PRECISION MEASURING TOOLS

METAL CALIPERS & DIVIDERS

PRECISION MEASURING TOOLS

1199

CALIPERS F

F) 6" METAL • Range: 0 to 6" (0 to 15 cm) • Thumb roller adjust with top lock screw 2940003 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . G) 6" CARBON FIBRE DIGITAL • Range: 0 to 6" (0 to 15 cm) • Resolution: 0.01" (0.1 mm) • Large LCD display • Metric to inch conversion 8157141 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . H) 8" STAINLESS STEEL VERNIER • Fine adjust knob with top lock screws • Range: 0 to 8" (0 to 20 cm) • Resolution: 0.001" (0.02 mm) 8009558 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . I) 6" STAINLESS STEEL DIAL • Range: 0 to 6" • Resolution: 0.001" 2940252 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

All calipers, excluding 2940252, measure in both SAE and Metric.

399

14 24 27

J) & K) STAINLESS STEEL DIGITAL CALIPERS • Set 0 at any position, holds reading • High accuracy, fine adjustment wheel, lock knob and convenient reading large display • Resolution: 0.0005" (0.01 mm) • Batteries and case included 99 6" FRACTIONAL/SAE/METRIC • Range: 0 to 6" (o to 15 cm) • Resolution: 0.0005", 0.01 mm, and 1/64" 99 8204265 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . 99 8" SAE/METRIC Range: 0 to 8" (0 to 20 cm). 99 8157158 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . K) 12" SAE/METRIC 99 Range: 0 to 12" (0 to 300 mm). 99 8128761 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . .

29 44 54

259

PRECISION MEASURING TOOLS

BEAM COMPASS

GAUGE & MAGNETIC BASES

• Draw or scribe circles and arches • Metal tips and pencil holder allow for use on wood and metal • Marks circles from 1-1/2" to 24" diameter using a single beam section • Using additional sections allows marking up to 80" circles 99 8178170 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . .

MULTI-USE RULE & GAUGE A) 2-1/4" DIA DEFLECTION GAUGE • Use with magnetic base • 0.1" travel per rev. of gauge, total travel: 1" • Graduations: 0.001" 2970986 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . MAGNETIC BASE • Use with dial gauge or other instruments • Base can be mounted in any position • Will fasten on angles, upside down and on round bar • On/off switch B) 90 LB (40 KG) MAGNETIC STRENGTH 8048779 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . C) 130 LB (60 KG) MAGNETIC STRENGTH 2944460 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . .

• Drill point gauge for 59° drill points • Bevel protractor to measure and lay out angles • Centre finder locates centre of shafts or circles • Divider splits circles into sectors, regular polygons, and polygrams (up to 9 equal parts) • Tap and drill table shows popular tap sizes with correct drill sizes for National form of thread • 4" rule has etched graduations in 64ths and mm 99 • Stainless steel construction 99 8177941 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

1899

19 2299

SPECIALTY MEASURING TOOLS

PROTRACTORS G D H

G) CENTRE FINDER • Use with round, square, hexagon, or octagon stock • Max. 8" circle, octagon, or square • Max. 5-3/4" hexagon 99 2940245 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . H) DEPTH GAUGE • For precise measurement of small holes and slots • Measures to a depth of 6" (15 cm) 99 2940074 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

F D) ANGLE FINDER • 4 functions: saw guide, drawing circles, marks parallel lines, and calibrates distance • Used to measure or transfer outside, inside or sloped angles • Use for miter angle layout • Features a level on arm 99 2940106 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 0 to 180° PROTRACTOR • 1° graduations • O’all length: 7-3/4" 99 8017479 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . F) DEPTH and ANGLE PROTRACTOR • Measures angles: 0 to 180°, depth: 0 to 6" • All metal construction 49 8006141 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

MAGNETIC POLYCAST PROTRACTOR

2 6

260

• Adjustable pointer to mark and transfer angles • Easy reading protractor dial with 1° graduations • Dampened pendulum for quicker readings • Magnetic base and back adheres to ferrous surfaces • Pitch angle calculator on back • O’all dim.: 4-3/4" x 4-1/4" x 1-1/4" 99 2940064 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

SHEET METAL GAUGE

• US standard • Inches and gauge measurements • Measures uncoated sheet metal, steel and plate iron 8003604 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . • Determines size of holes, slots, and recesses • Measuring range: 5/16" to 1/2", 1/2" to 3/4", 3/4" to 1-1/4", 1-1/4" to 2-1/8", 2-1/8" to 3-1/2", and 3-1/2" to 6" (8 to 12.7 mm, 12.7 to 19 mm, 19 to 32 mm, 32 to 54 mm, 54 to 89 mm, and 89 to 152 mm) 99 2940716 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

PADLOCKS

6 PC TELESCOPING GAUGE SET

1399

6" CONTOUR GAUGE

• Black steel body with SAE and metric graduation • 3-1/4" long stainless steel pins 8059982 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

SHOP ONLINE www.princessauto.com

899

CONVERSION TABLE

VISIT OUR SITE FOR: • Secure Shopping • Store Locations and Hours of Operation • Catalogue Download • Flyer Download

• Extensive equivalents formulas and fraction/decimal/metric equivalent chart • Converts length, area, volume, weight, and temperature in mm, gal./litre, pounds/kg., fahrenheit/celsius, ft./m, yards/m 99 2970088 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

PADLOCKS LIFETIME WARRANTY

PADLOCKS

D A

A) 2" ADJUSTABLE PADLOCK • Solid brass body • Case hardened chrome plated steel shackle • Double locking device for added security • Spool pins for pick resistance protection 99 8093833 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . B) 1-7/8" WIDE BRASS COMBINATION LOCK • 4 number resettable lock • 1" hardened steel shackle 99 8190670 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . C) SOLID STEEL SHROUDED PADLOCK • Double ball locking allows greater pull strength • Hardened chrome plated solid steel alloy shackle, resists prying, sawing and hammer impact 99 8093841 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . D) U-BAR LOCK • Resists prying, sawing, and hammer impact • Double locking shackle gives greater pull strength • 7-pin tumbler keyway design provides the highest protection against picking 99 8026584 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

F E

11 18

E) WEATHER PROOF STEEL CABLE • 5/8" dia. x 7 ft. • Use to secure power tools, gates, motor cycles, etc. • Use with lock 8026584 above 8026575 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . F) WEATHERPROOF STEEL PADLOCK • Solid brass cylinder for long life • Double locking device for added security • Case-hardened steel shackle resists sawing • Keyway cover seals out moisture, dirt, etc. • Weather proof, resists corrosion in tough weather conditions 8026593 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 3 PK. 8026600 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . .

2499

999 2499

261

SECURITY/WOOD WORKING

SOLID STEEL PADLOCKS

PADLOCKS A

• Nickel plated, hardened shackle • 5 pin AM1 keyway and locking steel ball • Steel protective guard plate • Triple chrome finish

B • Non-ratchet padlocks • Includes 2 keys • Hard plastic body cover with vinyl shackle cover A) 40 MM 8060019 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 60 MM with 6" SHACKLE 8060037 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

Size Wt. (lbs.) 1-1/2" 0.7 1-3/4" 0.8 2" 1.0

3 699

ITEM 8008238 8008256 8008292

PRICE 10.99 11.99 12.99

LOCKING U-BAR

6 FT LOCKING CABLE

• Steel lock housing and chrome plated pin • 6 ft., 3/8" steel cable with PVC coating • Shank diameter: 1/2" and 5/8" • With 2 keys 8103939 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

• Steel U-loop with PVC coating, steel body with nylon coating • Shackle diameter: 9/16" • With 2 keys • Steel cable with PVC coating • 3/8" dia. x 71" 99 • Double loop end type 8103947 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

1899

HASPS Heavy duty steel construction, concealed screws, and includes all hardware for installation. 7-1/2" GALVANIZED HASP 8093817 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3/4" GALVANIZED HASP Double flexed hinged hasp. 8093809 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MOTION LIGHT • Automatically activated by motion • On/Off/Auto functions • Set to "Auto" light operates only when dark, does not turn on in the light • Light shuts off after 1 minute of not sensing motion • All-in-one with no wiring necessary • 6 LED lamp for long life and low energy consumption • Mounting bracket included • Uses 4 "AA" batteries (included) 8170458 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

WOODWORKING TOOLS

999 999

SOLAR SECURITY LIGHT

• Detects motion up to 25 ft. • Mounts easily to wall, fascia, soffit or eaves • 5 pc super LED light • Operates for 5 days with no sun • Rechargeable Ni-Cd batteries • Adjustable sensitivity reduces false triggers • Detachable solar panel unit for flexible installation 99 • 10 ft. cable length 8169302 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

7499

C) 10-1/2" ADJUSTABLE BEVEL • Spring steel blade with hardwood handle • Brass end caps and fittings • Blade can be set to any angle 8111361 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . .

1199

C D

262

D) TWIN MOUTH BLOCK PLANE • 2 blade seats allow use as bull nose plane or block plane • Base dim. 7-3/4" x 2-1/16" 99 8222960 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) #10 RABBIT PLANE • High carbon steel blade with hardness of 55 to 60 HRC • Base dim: 12-3/4" x 2-1/8" • Blade width: 2-1/8" (54mm) 99 8167660 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19 32

SCREWDRIVERS

SCREWDRIVERS SCREWDRIVER SETS • Chrome vanadium steel blades with magnetic tips • Comfort grip handle 2 PC SET Slotted and Phillips with pocket clip. 8034325 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 2 PC SET 1 slotted and 1 Phillips. 8138745 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 6 PC SET 2 slotted, 2 Phillips, and 2 square. 8138729 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . 7 PC SET 3 slotted, 2 square, and 2 Phillips. 8138760 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . 7 PC JUMBO SET 2 slotted, 2 square, and 3 Phillips. 8138778 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . .

149 10 PC SET 3 slotted, 4 Phillips, and 3 square. 8138737 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . . 12 PC SET 99 4 slotted, 3 square, 4 Phillips, and 1 Torx. 8138752 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . 99 20 PC SET (SHOWN) 5 slotted, 3 Phillips, 1 stubby Phillips, 4 square, 3 Torx, and 3 offset (slotted, 99 Phillips, and square. 8138786 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . 99

1 6

1399

1799

INDIVIDUAL SCREWDRIVERS

7 PC INSULATED SCREWDRIVER SET

A Style • Insulated rubber handles • Includes 1 tester, 3 slotted, and 3 Phillips 8001635 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

24" LARGE SCREWDRIVER

Wt. 1.2 lbs.

8170888 – PHILLIPS 8002944 – SLOTTED . . . . . . . . . . . . . . . . . . . . .

599

24" FLEXIBLE DRIVER Flexible shaft with rubber sleeve and 1/4" hex female bit adapter. 8009623 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

999

Slotted Slotted A Slotted Slotted Slotted Square Square B Square Square Phillips Phillips C Phillips Phillips Phillips

Wt. (lbs.) ITEM PRICE 1/4" x 1-1/2" 0.1 8149817 1.99 1/8" x 3" 0.1 8149791 1.99 3/16" x 4" 0.1 8149809 1.99 1/4" x 4" 0.2 8149825 2.49 5/16" x 5" 0.3 8149833 2.99 #0 x 4" 0.2 8149700 2.49 #1 x 4" 0.2 8149718 2.49 #2 x 4" 0.3 8149726 2.49 #3 x 6" 0.3 8149734 2.99 #0 x 3" 0.1 8149742 1.99 #1 x 4" 0.1 8149759 1.99 #2 x 1-1/2" 0.1 8149775 1.99 #2 x 4" 0.2 8149767 2.49 #3 x 6" 0.3 8149783 2.99 Size

19 PC FLOATABLE SCREWDRIVER SET

3 PC OFFSET SCREWDRIVER SET

• Includes: #1 Phillips x 3/16" slotted, #2 Phillips x 1/4" slotted, and #3 Phillips x 5/16" slotted • Lengths: 4-1/4", 4-1/2", and 6-3/4" 8034263 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

• 6 floatable screwdrivers (3 Phillips and 3 slotted) • 6 tamper resistant Torx bits • 3 square and 3 hex bits 99 • With floatable magnetic bit driver 8213498 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . .

2499

263

SCREWDRIVERS

MULTI-DRIVER SCREWDRIVERS A B A) 2 PC SET C • Screw holding clips • #0 Phillips and 3/16" slotted bits 99 8034370 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . D B) 12 PC MAGNETIC DRIVER SET Includes: 3 Phillips, 2 Torx (T-15 and T-20), 3 slotted (1/8", 1/4", 5/16"), and 3 Pozidriv bits. 99 D) 12 IN 1 COMBINATION SCREWDRIVER SET 8034398 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . • Quick change bit holder • 6 pc. 4-5/16" long double end bits: C) 8 WAY SCREWDRIVER Phillips: #1 x #2, square: #1 x #2, 4 double ended bits: Phillips (#1 and #2), slotted: 3/16" x 1/4", star: T10 x T15, slotted (3/16" and 1/4"), Torx (T-15 and T-20), T20 x T25, T27 x T30 and square (#1 and #2). 99 99 8103749 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 8034218 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

2 2

TORQUE SCREWDRIVER

12 PC MULTI SCREWDRIVER

Includes: 1 slotted, 3 Phillips, 4 square, 2 hex keys, and 1 awl. 8190803 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

PRECISION SCREWDRIVER SETS

• Ideal for low torque assemblies • 2 to 36 in-lb torque range • 1/4" hex female drive for use with standard screwdriver bits 49 8175143 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

3999

E) 6 PC SET • 3 slotted and 3 Phillips • Measure 6.5", 7.5", and 9.5" • Chrome vanadium blades 8001630 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . F) 16 PC SET • Includes: 6 slotted (1, 1.4, 2, 2.4, 3, and 3.8), 4 Phillips (#1-1, #1-2, #1, and #0-2), 3 hex (1.5, 2.0, and 2.5 mm) and 3 nut drivers (3, 4, and 5mm) • Cross bar for extra leverage 2922847 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . G) 15 PC SET • 5 slotted, 4 Phillips. and 6 Torx • 4-3/4" long chrome moly blades 2920360 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) 9 PC PRECISION SET • 2" long nickel-chrome-moly steel blades • Ergonomic rubber handles • Includes: 3 slotted (2, 2.4, and 3 mm), 3 Phillips (#00, #0, and #1), and 3 Torx (T-6, T-8, T-9) 8174963 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . I) 33 PC PRECISION SCREWDRIVER SET • 30 chrome vanadium bits: slotted - 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0 mm Phillips - #000, #00, #0, and #1 hex - 0.7, 0.9, 1.3, 1.5, 2.0, 2.5, 3.0, and 4.0 mm Torx - T-4, T-5, T-6, T-7, T-8, T-9, T-10, T-15, and T-20 Pozidriv - #0 and #1 • 7-7/8" flexible extension • Adjustable extension screw handle • 1-1/8" magnifier 8059958 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

299

E F

599

1199

1499

264

1499

J) 6 PC INSULATED PRECISION SCREWDRIVER SET • Ideal for precision repair jobs • Soft, non-slip handles with rotating caps • Includes: 3 slotted (2, 2.5, and 3 mm) and 3 Phillips (#00, #0, and #1) 8175051 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

1499

ROTARY SCREWDRIVER BIT • Unique rotating bit holder allows user to “dial” in a new bit • Quick bit changes and no lost bits • Clear bit roller for identification of bits • Includes 12 chrome vanadium bits, each 1" long: slotted: 1/8, 5/32, 3/16", Phillips: #1, #2, #3, hex: 1/8, 5/32, 3/16", and square: #1, #2, #3 8103632 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Reversible ratchet, bit holder plus magnetic bit holder for use in electric drills • Bits include slotted, Phillips, square, Torx, SAE and metric hex, plus 1/4" dr. socket adapter 2920587 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . .

999

STUBBY MINI SCREWDRIVERS

1999

RATCHETING SCREWDRIVERS

SCREWDRIVERS

103 PC RATCHETING SCREWDRIVER SET

1" dia. x 1-3/8" long, pk of 2. Wt. 0.1 lbs.

8034272 – PHILLIPS: #1 & #2 8034281 – SLOTTED: 3/16" & 1/4" . . . .

99¢/pkg.

A B

A) 6-IN-1 RATCHETING SCREWDRIVER • 3 ratchet settings: forward, manual, reverse • Ergonomic handle has convenient bit storage • Six 1" bits: #5 slotted; #0 and #1 Phillips; #0, #1, and #2 square 99 8131427 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 14-IN-1 RATCHETING SCREWDRIVER • 3 ratchet settings: forward, manual and reverse • Ergonomic handle has convenient bit storage • Twelve 1" bits: 3/16" and 1/4" slotted; #0, #1, #2, and #3 Phillips; #0, #1, #2, and #3 square; T-15 and T-20 Torx 99 8131401 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . C) 12 IN 1 RATCHETING SCREWDRIVER • Quick change bit holder • 6 pc 4-5/16" long double end bits: Phillips: #1 x #2, square: #1 x #2, slotted: 3/16" x 1/4", star: T10 x T15, T20 x T25, T27 x T30 99 8103715 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

F) 11 PC SET • Includes: 3 slotted (3/16", 7/32", and 1/4"), 2 Phillips (#1 and #2), 2 Pozidriv (#1 and #2), and 2 Torx (T-10 and T-15) • 1/4" ratchet handle and socket adapter 99 8002017 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . G) 17 PC SET • 1/4" square x 1/4" hex head • 6 sockets: 5/32", 3/16", 1/4", 9/32", 5/16", and 3/8" • 10 bits: 4 Torx (T-10, T-15, T-20, and T-25), 2 slotted (3/16" and 1/4"), 2 Phillips (#1 and #2), and 2 Pozidriv (#1 and #2) 99 8002016 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . H) 42 PC SET • Reversible offset ratchet with quick release • 31 bits: 8 hex (3, 4, 5, and 6 mm, 3/32", 5/32", 3/16", and 1/4"), 4 square, Pozidriv and Phillips (#0 to #3), 4 slotted (3, 4, 5, and 7 mm), and 7 Torx (T-10, T-15, T-20, T-25, T-27, T-30 and T-40) • Eight 1/4" dr. sockets (6 to 13 mm) • Socket adapter and magnetic bit holder 99 2920892 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

D E

D) EXTENDABLE RATCHETING SCREWDRIVER • 1/4" lb. capacity magnetic head • Length: retracted 1-5/16", extended 7" • Includes 6 bits: 2 Phillips (#1 and #2), 2 slotted (3/16" and 1/4"), 2 Torx (T-10 and T-15) 99 8045206 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . E) 14-IN-1 FIVE WAY RATCHETING SCREWDRIVER • 5-way head tilts and locks at 0°, 45°, 90°, 135°, and 180° angles • 3 ratchet settings: forward, manual, and reverse • Ergonomic handle has convenient bit storage • 13 S2 steel 1" long bits: slotted (3/16" and 1/4"), Phillips and square (#1 to #3), and Torx (T-15, T-20, and T-25) • 2-3/8" magnetic bit holder 99 8059925 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

OFFSET RATCHET SETS F

265

IMPACT DRIVERS/BIT SETS

IMPACT DRIVERS A A) 1/2" DR. IMPACT DRIVER • Includes driver, 5/16" hex bit adapter, 2 slotted and Phillips bits • Reversible action to loosen or tighten fasteners • Adapter can be removed to allow use with sockets 99 8031248 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . B) 4 PC IMPACT DRIVER BIT SET • Includes bits: Phillips #2, #3, slotted 5/16" and 3/8" • Fits 3410602 and 8031248 8031220 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 3.49

C B C) 7 PC 1/4" HEX IMPACT DRIVER SET • Contains 1/4" dr. hex impact driver, three 50 mm bits (Phillips #1 and #2, and slotted 3/16"), one 75 mm bit (Phillips #2), and two 1/4" dr. hex nut driver heads • All adapter pieces are high quality chrome vanadium steel 8003577 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

BIT SETS 58 PC 1/4" DR POWER BIT SET

• 72 teeth chrome vanadium steel stubby bit ratchet with S2 tool steel bits • Quick change bit holder, 1/4" square x 1/4" hex adapter, and 1/4" dr. socket adapter included • Bits include: 4 pc. Phillips (#0, #1, #2, #3); 4 pc. Pozidriv (#0, #1, #2, #3); 4 pc. slotted (3, 4. 5, 5.5, 6.5 mm); 8 pc. hex (2, 2.5, 3, 4, 5, 6, 7, 8 mm); 10 pc. Torx (T-7, T-8, T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40); 10 pc. Tamper-resistant Torx (T-7, T-8, T-9, T-10, T-15, T-20, T-25, T27, T-30, T-40); 8 pc. Tamper plus (T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45); 3 pc. Spanner, (6, 8, 10 mm); and 3 pc. Spline (5, 6, 8 mm) 99 8160426 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

2-3/8" QUICK CHUCK • Bits quickly and easily snap into place • 1/4" hex shank, chrome vanadium construction • Non-magnetic, ideal for use in applications sensitive to magnetic fields such as computers, electronics, etc. 99 8021071 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

SECURITY BIT SET (SHOWN) Bit sizes include: 9 Torx (T-8 to T-40), 12 hex (5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 2, 2.5, 3, 4, 5, and 6 mm), 4 tri-wing (#1 to #4), 4 spanner (#4, #6, #8 and #10), 3 Torq (#6, #8 and #10), and metal bit holder. 99 2920513 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . COMBO BIT SET Bit sizes include: 3 square (#1 to #3), 4 Phillips (#0 to #3), 4 slotted (1/8, 5/32", 3/16", and 1/4"), 12 security hex (5/32", 9/64", 1/8", 7/64", 3/32", 5/64", 2, 2.5, 3, 4, 5 and 6 mm), 9 security Torx (T-8 to T-40), and metal bit holder. 99 2920704 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

33 PC BIT SETS

BIT HOLDER

266

• Holds 22 screw bits for cordless or power drills and screwdrivers • Easily view and keep bits from getting lost • O’all dim.: 1-7/8" x 2-5/8" x 1-1/4" 3410240 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

No sale is final until you’re satisfied! 199

BIT SETS

12 PC 1/4" DR POWER BIT SET

7 PC T-HANDLE BIT SET

• 72 teeth chrome vanadium steel stubby bit ratchet and S2 tool steel bits • Bits include: 4 pc. Phillips (#0, #1, #2, #3), 4 pc. square (#0, #1, #2, #3), and 2 pc slotted (4.5, 6.5 mm) 99 8160442 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

8 PC FOLDING BIT SETS

Includes sizes: T-6, T-7, T-8, T-9, T-10, T-15, T-20. 8167553 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

549

32 PC SECURITY SOCKET BIT SET

Chrome vanadium steel. SAE Includes: 6 hex (1/16", 5/64", 3/32", 1/8", 5/32", 3/16"), 1 slotted (3/16"), 1 Phillips (#2). 8159568 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . METRIC Includes: 6 hex (1.5, 2, 2.5, 3, 4, 5 mm), 1 slotted (5 mm), 1 Phillips (#2). 8159550 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 799

12" BIT HOLDER with C-RING

• Chrome vanadium steel • Includes: 9 Tamper proof Torx (T-10 to T-45), 12 Tamper proof hex (5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 2, 2.5, 3, 4, 5, and 6 mm), • Non-magnetic clip style bit holder, ideal for use 4 tri-wing (#1 to #4), 3 Torq (6, 8, and 10 mm), in applications sensitive to magnetic fields such 4 spanner (4, 6, 8, and 10 mm), as computers, electronics, etc. and a metal case 99 • Holds 1/4" hex shank bits 99 8034799 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . 8021348 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

QUICK CHANGE BIT HOLDERS

BITS SCREWDRIVER BITS

• Clear plastic tubing with aluminum tube inside • Magnetic 3-1/8" LENGTH 8003788 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 4-3/4" LENGTH 8003786 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

Type Qty. #2 Phillips 2 #1 Square 2 99 #2 Square 2 #3 Square 2 49 POWER BITS

2 3

POWERFIST We proudly supply you with Powerfist products, which have a proven reliability and great value Only available at Princess Auto!

ITEM PRICE 8085227 1.99 8085243 1.99 8085250 1.99 8085268 1.99

Wt. 0.1 lbs.

Type Length ITEM PRICE #1 Phillips 3" 8085276 1.99 #2 Phillips 3" 8085284 1.99 #1 Square 3" 8085292 1.99 #2 Square 3" 8085300 1.99 #3 Square 3" 8085318 1.99 #1 Phillips 6" 8085326 4.99 #2 Phillips 6" 8085342 4.99 #1 Square 6" 8085359 4.99 #2 Square 6" 8085367 4.99

Slotted: Standard or flat for driving single slotted screws. Tip width range from 1/6" to 1/2". Phillips®: Designed specifically for use with Phillips® head screw, which has two recessed slots at right angles to each other. Sizes range from 0 point (small) to 4 point (large). Square head: Square tip, used in mobile homes, recreational vehicles and industrial applications. Sizes range from 1 point (small) to 3 point (large). Pozidriv®: Similar to the Phillips® style, the screw can be identified by additional lines on the face. Sizes range from 1 point (small) to 4 point (large). Torx®: Star shaped, used in the automotive industry. Sizes range from T-10 (small) to T-30 (large).

267

TORX KEY SETS

10 PC MULTI-DRIVE T-BAR with TORX BIT SOCKET SET

TORX KEY SETS 9 PC TAMPER PROOF TORX KEY SET

• S2 steel with satin finish • Includes: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 and T-50 8061947 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . .

9 PC TAMPER-PROOF TORX KEY SET

• Chrome vanadium steel sockets with S2 tool steel bits • Includes: 1/4", 3/8", and 1/2" multi-drive 10" long T-handle, 3 pc. 1/4" dr. bit sockets (T-20, T-25, T-30), 3 pc. 3/8" dr. bit sockets (T-40, T-45, T-50), and 3 pc. 1/2" dr. bit sockets 99 (T-55, T-60, T-70) 99 8159527 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . .

PRECISION TAMPER PROOF TORX KEY SET

• Sizes T-4 to T-9 • Chrome moly steel keys with high visibility • Chrome moly steel size markings, colour-coded for quick reference • O’all length: 3" • Sizes: T-10, T-15, T-20, T-25, T-27, T-30, T-40, 8027020 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . T-45, T-50 99 8175101 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

999

6 PC TORX SCREWDRIVER SET

INDIVIDUAL TORX SCREWDRIVERS Wt. (lbs.) 0.1 0.1 0.1 0.1

Size T-10 x 4" T-15 x 4" T-20 x 4" T-25 x 4"

ITEM

PRICE

8150245 8150252 8150260 8150278

1.99 1.99 1.99 1.99

• Includes: T-10, T-15, T-20, T-25, T-30 and T-40 • Magnetic tip with chrome vanadium steel blade 99 2920902 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . .

TORX BITS & SOCKETS

A B

A) 7 PC TAMPER PROOF TORX BIT SET • 1/4" hex shank, 1" length • T-7 to T-25 • Heavy-duty S2 steel 99 8024283 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 11 PC TORX BIT SET • Sizes: T-10 to T-50 bits • 1/4" and 3/8" dr. bit holder • Heavy-duty S2 steel 99 8001049 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 8 PC FOLDING TORX WRENCHES Sizes: T-9 to T-40. 99 2920181 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 8 PC TORX BIT SET • 1/4" and 3/8" dr., sizes: T-10 to T-50 • Heavy-duty S2 steel 99 8037019 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) 9 PC E-TORX SOCKET SET Includes: five 1/4" dr. sockets (E-4 to E-8), four 3/8" dr. sockets (E-10 to E-16), and socket holder. 99 8001053 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 4 9

7 PC EXTERNAL TORX SOCKET SET

268

Contains three 1/4" dr. sockets (E-6 to E-8) and four 3/8" dr. sockets (E-10, E-12, E-14, and E-16). 99 2944148 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INDIVIDUAL TORX BITS Size Wt. (lbs.) ITEM PRICE T-50 0.1 2944122 5.99 T-55 0.1 2944130 5.99 T-60 0.2 2922342 7.99

HEX KEY SETS

A) 10 PC RING STYLE SETS SAE: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 2922250 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . METRIC: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, and 10 mm. 2922243 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 25 PC SET • 12 long arm SAE: 1/16" to 3/8" • 13 short arm Metric: 1.5 to 10 mm 2919330 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

C) 11 PC HEX KEY and TORX DRIVE SET • 9 hex keys: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", and 1/4" • 2 Torx drives: T-15 and T-20 99 2919819 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 D) 6 PC JUMBO SETS Chrome vanadium steel. 99 SAE Sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 3/4". 99 8018584 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . . METRIC 99 Sizes: 8, 10, 12, 14, 17, and 19 mm. 99 8018619 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . .

HEX KEY SETS

2 2

BALL END HEX KEY SETS

HEX KEY SETS

E) 9 PC METRIC SETS (BLUE) Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm. Style Wt. (lbs.) ITEM PRICE Short 0.6 8005564 7.99 Long 0.8 8005567 9.99 Ball End* 0.8 8005569 13.99 F) 13 PC SAE SETS (RED) Sizes: .05", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". Style Wt. (lbs.) ITEM PRICE Short 0.6 8005566 8.99 Long 0.9 8005568 10.99 Ball End* 0.8 8005572 15.99 * Ball end key turns 360° up to an angle of 35°.

9 PC EXTRA-LONG BALL END HEX WRENCH SET

6 6

11 13

16 17

• Ball end design will fit hard to reach fasteners up to 25° off centre • Nickel-chrome-moly steel wrenches are colour-coded for quick reference Wt. 1.0 lbs.

SAE Sizes: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", and 3/8". 8175119 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm. 8175135 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H Ball end hex keys allow driving at angles. G) SETS with HOLDER 6 PC METRIC: 2.5, 3, 4, 5, 8, and 10 mm. 99 2920038 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . 7 PC SAE: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 99 2920037 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . H) 9 PC METRIC SET • S2 steel construction • Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm LONG BALL END 99 2920730 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . EXTRA LONG BALL END 99 2920732 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . H) 13 PC SAE SET • S2 steel construction • Sizes: 0.05", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8" LONG BALL END 99 8008602 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . EXTRA LONG BALL END 99 8008586 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

17 17

10 PC T-HANDLE HEX KEY SETS • 6" blades • Metal storage stand SAE: Sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 99 2921286 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . METRIC: 99 Sizes: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 8, 10 mm. 8001647 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

999 999

269

HEX KEY & SOCKET SETS

9 PC EXTRA LONG BALL END HEX KEY SETS

T-HANDLE HEX KEY SETS

• Nickel-chrome-moly steel wrenches with mirror polish, chrome plated • Ball end side of the tool is magnetic SAE: Sizes: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16" and 3/8". 8199515 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . METRIC: Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm. 8199846 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

13 13

• 1 piece loop handle for extra strength • Comfort cushion grip • 6" shaft 6 PC METRIC (BLUE) Sizes: 2, 2.5, 3, 4, 5, and 6 mm. 99 8005576 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . 8 PC SAE (RED) Sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 99 7/32", and 1/4". 8005577 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

1799 1999

ERGO-FOLD HEX KEY SETS

• Heat treated chrome alloy steel • Composite grip handle shaped for improved ergonomics A) 9 PC SAE (RED) Sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", and 1/4". 99 8005575 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . 6 PC SAE (RED) Sizes: 5/32", 3/16", 7/32", 1/4", 5/16", 3/8". 99 8005573 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 7 PC METRIC SET (BLUE) Sizes: 2, 2.5, 3, 4, 5, 6, and 8 mm. 99 8005574 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

B A

7 9 8

HEX SOCKETS

F • S2 tool steel bits secured in chrome vanadium steel sockets • Socket holder included C) 6 PC 1/4" DR HEX BIT SOCKET SETS SAE: 3/32", 1/8", 5/32", 3/16", 7/32", and 1/4". 8142333 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . METRIC: 2, 2.5, 3, 4, 5, and 6 mm. 8142341 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

D) 7 PC 3/8" DR HEX BIT SOCKET SETS SAE: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" and 3/8". 8142317 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . METRIC: 3, 4, 5, 6, 7, 8, and 10 mm. 8142325 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . E) BALL END 7 PC SOCKETS with HOLDER 3/8" dr. provides full torque leverage in areas with restricted access. SAE: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 8016791 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . METRIC: 3, 4, 5, 6, 7, 8, and 10 mm. 8016782 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . F) 9 PC HEX 1/2" DR SOCKET SETS SAE: 3/16", 7/32", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8", and 3/4". 99 8045171 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . METRIC: 5, 6, 7, 8, 10, 12, 14, 17, 99 and 19 mm. 8045162 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . .

999 999

1499 1499

7 7

2499 2499

7 PC HEX BIT SOCKET SETS

270

• 3/8" dr. • High strength heat-treated alloy steel bits are securely broached into chrome plated socket bodies • Convenient vinyl storage holder SAE: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 2920412 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 3, 4, 5, 6, 7, 8, and 10 mm. 2920413 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999 2999

1/2" DR SHALLOW

12 pt. chrome vanadium steel. Socket Wt. (lbs.) ITEM 3/8" 0.1 8034100 7/16" 0.1 8034118 1/2" 0.1 8034126 9/16" 0.1 8034134 5/8" 0.1 8034142 11/16" 0.2 8034159 3/4" 0.2 8034167 13/16" 0.2 8034175 7/8" 0.3 8034191 15/16" 0.3 8034217 1" 0.3 8034225 1-1/6" 0.4 8034233 1-1/8" 0.5 8034258 1-3/16" 0.5 8036030 1-1/4" 0.6 8034266 10 mm 0.1 8034274 11 mm 0.1 8034282 12 mm 0.1 8034308 13 mm 0.1 8034324 14 mm 0.1 8034332 15 mm 0.2 8034373 16 mm 0.1 8034381 17 mm 0.2 8034407 18 mm 0.2 8034415 19 mm 0.2 8034431 20 mm 0.2 8035974 21 mm 0.2 8034464 22 mm 0.3 8034472 23 mm 0.3 8035990 24 mm 0.3 8034480 25 mm 0.3 8034498 26 mm 0.3 8034506 27 mm 0.4 8034514 28 mm 0.5 8036006 30 mm 0.5 8034522 32 mm 0.6 8034530

PRICE 2.09 2.09 2.09 2.09 2.09 2.19 2.29 2.59 2.79 2.99 3.59 4.39 4.39 4.79 4.79 2.09 2.09 2.09 2.09 2.09 2.09 2.09 2.19 2.29 2.29 2.59 2.59 2.79 2.99 3.19 3.59 3.59 4.09 4.79 4.99 5.39

1/2" DR DEEP

12 pt. chrome vanadium steel. Socket Wt. (lbs.) ITEM 3/4" 0.5 8035446 7/8" 0.5 8035453 15/16" 0.5 8035461 1" 0.5 8035503 1-1/16" 0.5 8035784 1-1/8" 0.5 8035776 1-3/16" 0.6 8035792 1-1/4" 0.7 8035826 1-5/16" 0.7 8035834 1-3/8" 0.8 8035842 1-7/16" 0.9 8035859 1-1/2" 1.1 8035883 1-5/8" 1.2 8035891 1-11/16" 1.2 8035909 1-3/4" 1.4 8035917 1-13/16" 1.6 8035925 1-7/8" 1.6 8035941 2" 1.7 8035966 29 mm 0.5 8035321 30 mm 0.6 8035339 32 mm 0.6 8035347 33 mm 0.7 8035354 34 mm 0.7 8035362 36 mm 0.9 8035370 38 mm 1.1 8035396 41 mm 1.3 8035412 46 mm 1.6 8035420 3/4" DRIVE SHALLOW

3/8" DR DEEP

6-pt. chrome vanadium steel. Socket Wt. (lbs.) ITEM PRICE 3/8" 0.1 2925642 2.59 7/16" 0.1 2925659 2.69 1/2" 0.1 2925667 2.79 9/16" 0.2 2925675 2.79 3/4" 0.3 2925709 3.39

12-pt. chrome vanadium steel. Socket Wt. (lbs.) ITEM PRICE 3/8" 0.3 8034555 3.59 7/16" 0.3 8034563 3.59 1/2" 0.3 8034571 3.59 9/16" 0.3 8034589 3.39 5/8" 0.3 8034597 3.59 11/16" 0.4 8034605 3.59 3/4" 0.4 8034613 3.79 3/16" 0.4 8034621 3.99 7/8" 0.5 8034639 4.49 15/16" 0.6 8034647 4.89 10 mm 0.3 8034670 3.59 12 mm 0.3 8034696 3.59 13 mm 0.3 8034720 3.59 14 mm 0.3 8034746 3.59 15 mm 0.3 8034779 3.59 16 mm 0.3 8034787 3.59 17 mm 0.3 8034795 3.59 18 mm 0.4 8034803 3.79 19 mm 0.4 8034811 3.79 21 mm 0.4 8034837 3.89 24 mm 0.6 8034845 4.59 27 mm 0.7 8034852 5.19 PRICE 6.39 6.39 6.39 6.39 6.49 6.79 6.99 7.69 7.69 8.59 8.69 9.39 10.09 10.29 10.89 11.19 11.59 11.99 6.79 6.99 7.29 7.69 7.89 8.69 9.29 9.99 11.19

12-pt. heat treated carbon steel, chrome plated Size Wt. (lbs.) ITEM PRICE 2-1/8" 2.1 8122012 15.99 2-3/16" 2.2 8122020 15.99 2-1/4" 2.6 8122038 15.99 2-3/8" 2.7 8122046 17.99 2-1/2" 3.0 8122053 17.99 2-5/8" 3.4 8122061 19.99 2-3/4" 3.7 8122079 19.99 1" DR SHALLOW

3/8" DRIVE SHALLOW

1/4" DR

6-pt. chrome vanadium steel. Socket Style Wt. (lbs.) ITEM PRICE 1/4" Shallow 0.1 2925576 1.44 5/16" Shallow 0.1 2925584 1.44 1/4" Deep 0.1 2921344 2.09 5/16" Deep 0.1 2921302 2.09 6-pt. chrome vanadium steel. Socket Wt. (lbs.) ITEM PRICE 3/8" 0.1 2925600 1.29 7/16" 0.1 2925618 1.49 1/2" 0.1 2925626 1.69 9/16" 0.1 2925634 1.69 5/8" 0.1 2920246 1.79 3/4" 0.1 2920249 2.09 10 mm 0.1 2925741 1.49 11 mm 0.1 2920029 1.49 12 mm 0.1 2920030 1.69 13 mm 0.1 2920032 1.69 14 mm 0.1 2920033 1.69 15 mm 0.1 2925782 1.89 16 mm 0.1 2920034 1.89 17 mm 0.1 2920035 1.89 18 mm 0.2 2925816 2.29 19 mm 0.2 2920036 2.39

INDIVIDUAL SOCKETS

SOCKETS

271

SOCKET SETS

SOCKET SETS A

6 PC 3/8" DR DEEP E-TORX SOCKET SETS

• Chrome vanadium with chrome plating • Socket rail included SAE Sizes: E10, E11, E12, E14, E16, E18. 8159113 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . METRIC Sizes: E4, E5, E6, E7, E8, E10. 8159121 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

FLANK GRIP

1699 1199

UNIVERSAL JOINTS Swings 90° in either direction. 2919124 – 1/4" DR – Wt. 0.1 lbs. . . . . . . . . . .

• Chrome vanadium 6-pt. sockets • Socket holder included A) SHALLOW SOCKETS Drive Wt. Sizes Size Pcs. (lbs.) ITEM PRICE 3/8" 9 3/8" to 7/8" 1.2 2920098 9.99 3/8" 9 9 to 19 mm 0.9 2920106 9.99 1/2" 10 7/16" to 1" 2.1 2920170 15.99 1/2" 10 11 to 24 mm 1.8 2920171 15.99 B) DEEP SOCKETS 1/4" 9 3/16" to 1/2" 0.8 2920023 11.99 1/4" 9 5 to 12 mm 0.7 2920031 11.99 3/8" 8 3/8" to 13/16" 1.9 2910230 13.99 3/8" 8 10 to 19 mm 1.7 2919496 13.99 1/2" 8 1/2" to 15/16" 2.8 2919793 17.99 1/2" 8 12 to 24 mm 3.0 2919579 17.99

299 99 2911337 – 3/8" DR – Wt. 0.2 lbs. . . . . . . . . . . 3 99 2917607 – 1/2" DR – Wt. 0.4 lbs. . . . . . . . . . . 4 6 PC 3/8" DR BALL END 3 PC UNIVERSAL JOINT SET Sizes: 1/4", 3/8", and 1/2" dr. 2921104 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

HEX BIT SOCKET SETS 99

DRIVE ADAPTERS Chrome vanadium steel. Size Wt. (lbs.) ITEM PRICE 1/4" F - 3/8" M 0.1 2917623 1.49 3/8" F - 1/4" M 0.1 2923423 1.49 3/8" F - 1/2" M 0.1 2911576 2.99 1/2" F - 3/8" M 0.1 2922417 2.99 1/2" F - 3/4" M 0.4 8000569 4.99 3/4" F - 1/2" M 0.3 2917680 4.99 3/4" F - 1" M 0.8 2911592 12.99 1" F - 3/4" M 0.9 2917599 12.99 3 PC DRIVE ADAPTER SET Sizes: 1/4" F x 3/8" M, 3/8" F x 1/2" M, 1/2" F x 3/4" M. 99 8000567 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . 3 PC REDUCER SET Sizes: 3/8" F x 1/4" M, 1/2" F x 3/8" M, 3/4" F x 1/2" M. 99 8000573 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

S2 tool steel bits secured in chrome vanadium steel sockets. SAE Sizes: 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 8159212 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . METRIC Sizes: 3, 4, 5, 6, 8, and 10 mm. 8159303 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . .

1499 1499

21 PC GO-THROUGH SOCKET SET

HOSE CLAMP SCREWDRIVER • Fits 5/16" hex head • Flexible shank to reach difficult spots • O’all length: 10-1/2" 2970198 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

3 PC SOCKET CAPS

272

• Used to turn sockets with a wrench in limited access areas • 1/4" dr. x 3/8" Hex, 3/8" dr. x 5/8" Hex, and 1/2" dr. x 3/4" Hex 8006999 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

699

• Chrome vanadium steel • Includes: 60 teeth Go-thru ratchet, 2 pc socket adapters (1/4" and 3/8"), 1 pc Go-thru extension bar, 17 pc sockets SAE from 3/8" to 3/4" and metric from 10 mm to 19 mm • Ideal for nuts on extended studs and adjusting screw locknuts 99 99 8104077 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . .

21 21

SOCKET SETS

A) 1/4" DR 21 PC SOCKET SETS 72 teeth ratchet, 7 deep and 9 shallow (6-pt.) sockets, universal joint, 6" spinner handle, 2" and 4" extensions, and metal storage case. SAE • Shallow: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2" • Deep: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2" 99 8203846 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC • Shallow: 4, 5, 5.5, 6, 7, 8, 9, 10, and 11 mm • Deep: 5.5, 6, 7, 8, 9, 10, and 11 mm 99 8203853 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 3/8" DR 20 PC SOCKET SETS 72 teeth ratchet, 8 deep and 9 shallow (6-pt.) sockets, 3" and 1-3/4" extensions, and metal storage case. SAE • Shallow: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", and 7/8" • Deep: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", and 13/16" 99 8203861 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC • Shallow: 9,10, 11, 12, 13, 14, 15, 17, and 19 mm • Deep: 10, 11, 12, 13, 14, 15, 17, and 19 mm 99 8203879 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 1/2" DR 16 PC SETS Contains: 72 teeth ratchet, 13 sockets (6-pt.), 5" extension, 14-1/2" flex handle, and metal storage case. SAE Sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", and 1-1/4". 99 8203887 – Wt. 7.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC Sizes: 10, 11, 12, 13, 14, 17, 19, 20, 21, 22, 23, 24, and 27 mm. 99 8203895 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 3/4" DR 20 PC SOCKET SETS Contains: 16 sockets (12-pt.), 4" and 8" extensions, 19" sliding T-bar, 20" ratchet, and metal storage case. SAE Sizes: 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8", 1-3/4", 1-13/16", 1-7/8", and 2". 99 2917110 – Wt. 29.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC Sizes: 19, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 41, 42, 45, 48, and 50 mm. 99 2917037 – Wt. 27.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . E) 3/4" DR 8 PC 12-PT. SAE SOCKET SET Sizes: 2-1/16", 2-1/8", 2-3/16", 2-1/4", 2-5/16", 2-3/8", 2-7/16", 2-1/2", and metal storage case. 99 2916914 – Wt. 22.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . F) 3/4" DR 26 PC PROFESSIONAL 12 PT. SOCKET SET • Chrome vanadium construction • Sizes: 7/8", 15/16", 1", 1-1/8", 1-3/16", 1-5/16", 1-3/8", 1-7/16", 1-5/8", 1-3/4", 1-7/8", 2" • Metric sizes: 22, 24, 27, 30, 32, 36, 38, 41, 46, and 50 mm • 4" and 8" extensions, 20" reversible ratchet handle, 18" sliding T-bar, and plastic storage case 99 8003040 – Wt. 35.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) 1" DR 20 PC 12-PT SAE SOCKET SET • Sizes: 1-5/8", 1-11/16", 1-3/4", 1-13/16", 1-7/8", 2", 2-1/8", 2-3/16", 2-1/4", 2-3/8", 2-1/2", 2-5/8", 2-3/4", 2-15/16", 3", and 3-1/8" • 25" reversible ratchet, 22" sliding T-bar, 8" and 16" extensions, and metal storage case 99 2923308 – Wt. 78.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

29 29

89 89

199

239

H) 31 PC METRIC SOCKET SET • 1/4" and 3/8" drive • Chrome vanadium steel • Includes: 1/4" dr. 48 teeth oval-head ratchet, 3/8" dr. 48 teeth oval-head ratchet, 3/8" dr. 3" and 6" extension bar, 10 pc. 1/4" dr. shallow sockets (4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 mm), 4 pc. 1/4" dr. deep sockets (7, 8, 10, 11 mm), 8 pc. 3/8" dr. shallow sockets (10, 11, 13, 14, 15, 17, 19, 21 mm), 4 pc. 3/8" dr. deep sockets (13, 14, 16, 17 mm), and 3/8" dr. 16 mm spark plug socket 99 8159659 – Wt. 4.5 lbs. . . . . . . . . .

273

SOCKETS & RATCHETS

COLOUR-CODED SOCKET SETS Chrome vanadium steel sockets are colour coded for easy reference. A) SHALLOW SOCKETS Drive Pcs. Wt. Sizes Size (lbs.) ITEM PRICE 1/4" 10 5/32" to 1/2" 0.5 8179780 9.99 1/4" 10 4 to 11 mm 0.5 8179806 9.99 3/8" 10 5/16" to 7/8" 1.3 8103541 12.99 3/8" 10 10 to 19 mm 1.1 8103582 12.99 1/2" 8 1/2" to 15/16" 1.6 8179764 15.99 1/2" 8 13 to 24 mm 1.5 8179772 13.99 B) DEEP SOCKETS 1/4" 10 5/32" to 1/2" 0.8 8179814 13.99 1/4" 10 4 to 12 mm 0.8 8179822 13.99 3/8" 10 5/16" to 7/8" 2.4 8179830 19.99 3/8" 10 10 to 19 mm 2.3 8179848 19.99 1/2" 8 1/2" to 15/16" 3.1 8179855 22.99 1/2" 8 13 to 24 mm 3.1 8179871 22.99

RATCHETS

QUICK RELEASE RATCHETS D

F E

• Heat treated chrome vanadium steel • Push button quick release • 72 teeth Drive Length Wt. (lbs.) ITEM PRICE C 1/4" C 3/8" C 1/2" D * 3/4" *24 teeth

5-3/4" 8" 10-1/2" 19"

E) STUBBY RATCHETS 48 teeth. Drive Wt. (lbs.) 1/4" 0.2 3/8" 0.5

0.3 0.8 1.5 5.7

8205114 8205130 8205148 2920099

11.99 14.99 17.99 49.99

• Heat treated chrome vanadium steel, fully polished chrome plating • 48 teeth F) QUICK RELEASE RATCHETS Drive Length Wt. (lbs.) ITEM PRICE 1/4" 7" 0.4 8063968 17.99 3/8" 11" 0.8 8063976 19.99 1/2" 15" 1.7 8063984 24.99 G) FLEX HEAD QUICK RELEASE RATCHETS 1/4" 6" 0.3 8063992 17.99 3/8" 11-1/2" 0.9 8064008 19.99 1/2" 17-1/2" 2.2 8064016 24.99

SWIVEL HEAD RATCHETS ITEM 8008381 8008390

PRICE 9.99 9.99

3-IN-1 RATCHET • Chrome molybdenum steel • Quick release • 72 teeth • 1/4" x 1/2" and 3/8" dr. • Chrome vanadium steel 8159105 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . .

1499

Drive Length Wt. (lbs.) 1/4" 5-1/2" 0.3 3/8" 9" 0.9 1/2" 11-1/8" 1.6

ITEM PRICE 8191801 1999 8191702 2499 8191678 2999

TECH TIPS Many accidents occur when goggles are lifted to get a closer look. Make sure that goggles stay on throughout the job. Take a break if you have to alter them.

274

Prescription goggles are available for people who need vision correction - ask your optometrist for advice on what's best for you.

HAND TOOLS

RATCHETS

RATCHETS A B

• Gold plated chrome vanadium steel • Quick release • 48 teeth 1/4" DR. 8143778 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . 3/8" DR. 8143224 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . 1/2" DR. 8143232 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . .

1399 1699 1999

A) RATCHETS Drive Length Teeth

FULL LENGTH DUAL HEAD RATCHETS • Chrome vanadium steel • 72 teeth, requires only 5° of swing 1/4" & 3/8" – O’all length: 8". 8106676 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . 3/8" & 1/2" – O’all length: 10-1/8". 8106700 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . .

1/4" 3/8" 1/2" 3/4" 1"

14 14

3/8" x 1/4" DUAL DRIVE STUBBY RATCHET

5-1/2" 7-3/4" 9-1/2" 19-1/2" 26"

42 45 45 43 44

Wt. (lbs.) 0.3 0.7 1.1 4.5 6.5

ITEM PRICE 2929339 2929321 2929362 2910297 8080228

B) PALM GRIP RATCHETS 1/4" DR, 42 TEETH. 99 2920007 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 99 99 3/8" DR, 38 TEETH. 2916955 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . C) FLEX HEAD STUBBY RATCHET 7-position handle with built-in spinner flexes 90°. 1/4" DR, 4-1/2" LENGTH, 42 TEETH 99 8056275 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . D) BENT FLEX HEAD RATCHETS, 45 TEETH Bent handle and flex head makes it easier to reach into confined areas. 99 3/8" DR, 10" LENGTH 99 2920263 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . 99

5 6 7

• Chrome vanadium steel construction • 72 teeth, requires only 5° of swing 8106619 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

1/2" DR ADJUSTABLE HANDLE RATCHET

EXTENSION BAR SETS

5 PC SET (SHOWN) • 1/4" dr. - 3" and 6" lengths • 3/8" dr. - 3", 6" and 10" lengths 2921096 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . 3 PC SET 3/8" dr. - 18", 24", and 30" lengths. 2918142 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . 4 PC SET 1/2" dr. - 15", 18", 24", and 30" lengths. 2918134 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . .

• 48 teeth, quick release • Chrome moly square drive 8175416 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . .

2499

899 BREAKER BARS

1499

2499

G H

EXTENSION BARS Size Wt. (lbs.) 1/4" x 3" long 0.1 1/4" x 6" long 0.1 3/8" x 3" long 0.1 3/8" x 6" long 0.2 1/2" x 5" long 0.4 1/2" x 10" long 0.5 3/4" x 4" long 1.0 3/4" x 8" long 1.7 3/4" x 12" long 2.3

7.99 9.99 12.99 29.99 39.99

ITEM PRICE 2923449 3.49 2922409 3.99 2917698 3.99 2917706 4.99 2917714 5.99 2917722 7.99 2910357 10.99 2910355 13.99 2910358 17.99

Wt. Type Drive Length (lbs.) 3/8" 18" 2.0 E Breaker 1/2" 18" 2.1 F Bar 1/2" 25" 2.9 3/4" 36" 6.7 3/8" 6-1/2" 0.3 Sliding G T-Bar 1/2" 9-3/4" 0.8 3/4" 17-3/4" 2.7 Speed 3/8" 14-1/2" 1.0 H Handle 1/2" 15" 1.0

ITEM PRICE 2920173 2900050 2900049 8005846 2920347 2920349 2920350 2920387 2920395

14.99 12.99 14.99 39.99 3.99 4.99 14.99 4.99 6.99

275

EXTENSIONS/TORQUE WRENCHES

WOBBLE EXTENSION SETS

Allows sockets to swivel up to 15°. 6 PC SET (SHOWN) Includes: 1/4" dr. (2" and 4"), 3/8" dr. (3" and 6"), and 1/2" dr. (5" and 10"). 2942860 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . 9 PC SET Includes: 1/4" dr. (2", 4", 9"), 3/8" dr. (3", 6", 9"), and 1/2" dr. (2", 5", 10"). 2910242 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . .

3/4" RATCHET & BREAKER BAR SET

• Chrome moly steel drive, chrome vanadium steel frame with chrome plating, ratchethead with black finish 99 • Includes: 3/4" ratchet, 3/4" breaker bar head, and 3 chrome moly steel handles (13-3/4", 22", 33-7/16") 99 8178782 – Wt. 18.3 lbs. . . . . . . . . . . . . .

149

3/8" DR KIT

FLEXIBLE EXTENSION SET

• Great for hard to reach places • 2 sizes: 1/4" dr. x 6" and 3/8 dr. x 8" 2920483 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

799 5 pc. set includes: 4" long stubby ratchet, 1-3/4", and 3" extension bar, universal joint, and spinner adapter. 99 2921245 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

3 PC RATCHET BUDDIES SET

• Use your fingers to take the slack out of a bolt or nut so your ratchet can take over • Use as a palm drive for hand installations • Made of tough anodized aluminum • Includes: 1/4", 3/8" and 1/2" dr. 8218752 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . .

3 PC FINGERTIP RATCHET SET • 1/4" dr., 42 teeth • 3/8" dr., 38 teeth 99 • 1/2" dr., 45 teeth 8151656 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

TORQUE MULTIPLIER

TORQUE WRENCHES TORQUE ANGLE GAUGE • 1/2" dr. input and output • Ideal when servicing engines using torque-to-yield fasteners • Takes guesswork out of tightening by indicating number of degrees fastener • 360° angle scale is marked in 2° increments with interval markers at 10° and 30° 99 2990209 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

3/4" DR TORQUE WRENCH

276

• Reversible drive • Torque: 100-600 ft.-lbs. • Click type, torques one way only allowing removal of tight bolts • O’all length: 45" 8002384 – Wt. 18.1 lbs. . . . . . . . . . . . . . .

999

• 4:1 gear ratio increases torque up to 730 ft-lbs • 1/2" drive (female), 3/4" drive (male) • Length: 17" 99 8063927 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . .

TORQUE MULTIPLIER • 9:1 gear ratio increases torque up to 1,100 ft-lbs • 1/2" dr. female x 3/4" dr. male • Chrome moly steel 8160665 – Wt. 9.0 lbs. . . . . . . . . . . . . . . .

19999

Sign-up to receive E-mail notification of our upcoming promos at:

24999

www.princessauto.com

Drive Length 1/4" 3/8" 3/8" 1/2" 3/4"

Strength

20 to 200 in.-lbs. 23 to 230 cmkg 14-1/2" 120 to 960 in.-lbs. 1.4 to 11 mkg 10 to 80 ft.-lbs. 14-1/2" 0.7 to 10.4 mkg 18" 20 to 150 ft.-lbs. 1.4 to 20.7 mkg 26-1/2" 50 to 300 ft.-lbs. 6.9 to 41.4 mkg 10"

Wt. (lbs.) ITEM PRICE 1.7 2922045 29.99 2.3 8086571 38.99 2.1 2920935 34.99 3.6 2919389 34.99 8.7 2926939 99.99

WRENCHES

COMBO RATCHET WRENCH SETS A) 7 PC COMBO RATCHETING WRENCH SETS • Stainless steel • 12-pt. ratcheting box-end with 72 teeth • Plastic storage case included SAE: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", and 3/4". 99 8006279 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . METRIC: 8, 10, 11, 13, 15, 17, 19 mm. 99 8006280 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . B) 8 PC REVERSIBLE COMBO WRENCH SET • Highly polished chrome vanadium steel chrome plating • Box end with 15° offset • HRC: 40° to 55° • 72 teeth SAE 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4". 99 8164857 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . METRIC 8, 10, 12, 13, 14, 15, 16, and 18 mm. 99 8164824 – Wt. 2.7 lbs. . . . . . . . . . . . . . . .

49 49

74 74

BOX END RATCHET WRENCH SETS

WRENCHES/TORQUE WRENCHES

DUAL SCALE TORQUE WRENCHES

C C) COMBO RATCHETING WRENCH SET • Chrome vanadium steel with heat treatment and chrome plating • 72 teeth 13 PC SAE (SHOWN): 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1". 99 8064099 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . 12 PC METRIC: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm. 99 8064107 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . .

124 94

ADJUSTABLE WRENCHES D

SAE and Metric measuring scales for sizing nuts, pipe and tube diameter. Wt. Size Jaw Cap. (lbs.) ITEM PRICE 6" 3/4" (19 mm) 0.3 8052778 3.99 8" 15/16" (24 mm) 0.6 8052787 4.99 10" 1-1/8" (28 mm) 0.9 8052796 6.99 12" 1-3/8" (35 mm) 1.4 8052803 9.99 15" 1-3/4" (44 mm) 2.7 8052821 16.99 18" 2-1/8" (54 mm) 5.0 8052830 24.99 24" 2-3/8" (60 mm) 7.0 8052849 38.99

D) 5 PC REVERSIBLE SETS Includes roll-up plastic pouch. SAE: 1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 3/4", and 11/16" x 7/8". 2917458 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 6 x 8, 9 x 10, 12 x 14, 15 x 17, and 19 x 21 mm. 2918803 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1899 1899

E) 4 PC RATCHETING SET • 72 teeth • Polished chrome vanadium steel SAE: 5/16" x 3/8", 7/16" x 1/2", 9/16" x 5/8", 11/16" x 3/4". 8059917 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 8 x 10 mm, 12 x 13 mm, 14 x 15 mm, 17 x 19 mm. 8203697 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4499 4499

277

WRENCHES

COMBINATION WRENCH SETS

STANDARD SETS 5 PC SET (SHOWN) SAE: 3/8", 7/16", 1/2", 9/16", and 5/8". 99 2918746 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . METRIC: 8, 9, 10, 11, and 12 mm. 99 2910107 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . 11 PC SET SAE: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", and 7/8". 99 2920668 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . METRIC: 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, and 19 mm. 99 2920015 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . 14 PC SET - with POUCH SAE: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", and 1-1/4". 99 2919603 – Wt. 6.2 lbs. . . . . . . . . . . . . . . . METRIC: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm. 99 2925055 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . 22 PC COMBO SAE & METRIC SAE and Metric sizes: 1/4" to 7/8" and 6 mm to 19 mm. 99 2922854 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . 25 PC SET with HOLDER Chrome vanadium. SAE: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16" and 1". METRIC: 7, 8, 10, 12, 13, 14, 15, 16, 17, 18, 19 and 20 mm. 99 8202939 – Wt. 7.1 lbs. . . . . . . . . . . . . . . .

4 4

13 11 32 19 18

STUBBY WRENCH SETS Allow access to nuts and bolts in limited spaces where a regular wrench will not work. 8 PC SAE 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 15/16", and 1", with overall length of 4" to 5-3/4". 99 2920100 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . 10 PC METRIC 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm, with overall length of 3-3/4" to 5-1/2". 99 2920101 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . LONG COMBO WRENCH SETS 14 PC SET SAE: 3/8" to 1-1/4". 99 2920121 – Wt. 10.3 lbs. . . . . . . . . . . . . . . . . . . METRIC: 8 mm to 32 mm. 99 2920372 – Wt. 9.1 lbs. . . . . . . . . . . . . . . . . . . . . 14 PC SET • Drop forged chrome vanadium steel is hardened and tempered • Meets ANSI specifications • Elliptical profile, fully polished SAE: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", and 1-1/4". 99 8099558 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . METRIC: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24, 27, and 30 mm. 99 8099541 – Wt. 6.2 lbs. . . . . . . . . . . . . . . . . . . . . JUMBO COMBO WRENCH SET 6 PC SAE 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2". 99 2917755 – Wt. 20.0 lbs. . . . . . . . . . . . . . . . . . . .

18 18 49 49

54 54 79

CROWFOOT WRENCH SETS

10 PC MINI SETS

Ideal for confined areas. SAE SET • 5/32", 3/16", 13/64", 7/32", 15/64", 1/4", 9/32", 5/16", 11/32", and 3/8" • O’all length: 2-3/4" to 3" 2920092 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . METRIC SET • 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, and 11 mm • O’all length: 2-3/4" to 3-15/16" 2920369 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . .

14 14

3/8" DR 10 PC SET (SHOWN) SAE: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and 1". 2921328 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . METRIC: 10, 11, 13, 14, 15, 17, 19, 21, 22, and 24 mm. 2923530 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . 99 3/8" DR 8 PC FLARENUT SET with HOLDER SAE: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", and 7/8". 2922839 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . 99 METRIC: 10, 11, 13, 14, 15, 17, 19, and 22 mm. 2923985 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . .

1499 1499 1699 1699

SAE OPEN END ANGLE WRENCH SETS 14 PC SET • Includes: 1/2", 7/16", 3/8", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", and 1-1/4" • 60° and 15° 99 2920120 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PC JUMBO SET (SHOWN) • Includes: 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", and 2" • 45° and 15° 99 2920324 – Wt. 22.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

278

CHROME VANADIUM STEEL DROP FORGED STEEL

SAE SIZES Size Wt. (lbs.) 1/4" 0.1 5/16" 0.1 3/8" 0.1 7/16" 0.1 1/2" 0.2 9/16" 0.2 5/8" 0.3 11/16" 0.3 3/4" 0.4 13/16" 0.5 7/8" 0.5 15/16" 0.6 1" 0.7 METRIC SIZES Size (mm) Wt. (lbs.) 7 0.1 8 0.1 10 0.1 12 0.2 13 0.2 14 0.2 15 0.2 16 0.3 17 0.3 18 0.3 19 0.4 20 0.5 SAE SIZES Size Wt. (lbs.) 1/4" 0.1 5/16" 0.1 3/8" 0.1 7/16" 0.1 1/2" 0.1 9/16" 0.2 5/8" 0.2 METRIC SIZES Size (mm) Wt. (lbs.) 10 0.1 11 0.1 12 0.1 13 0.1 14 0.2

ITEM 8068207 8068215 8068223 8068231 8068249 8068256 8068264 8068272 8068280 8068298 8068306 8068314 8068322

PRICE 1.99 2.19 2.39 2.59 2.99 3.19 3.79 4.59 4.89 5.99 6.99 7.79 8.99

Size Wt. (lbs.) 1-1/16" 0.9 1-1/8" 1.1 1-3/16" 1.4 1-1/4" 1.7 1-5/16" 1.8 1-3/8" 2.2 1-7/16" 2.4 1-1/2" 2.7 1-5/8" 3.2 1-3/4" 3.7 1-13/16" 3.8 1-7/8" 5.0 2" 5.6

ITEM 8068330 8068348 8068546 8068355 8068363 8068553 8068561 8068371 8068579 8068389 8068595 8068603 8068397

PRICE 10.59 11.99 12.79 14.99 15.59 17.79 20.99 22.99 24.99 25.99 27.99 29.99 29.99

ITEM 8067878 8067886 8067894 8067902 8067910 8068041 8068058 8068066 8068074 8068082 8068090 8068108

PRICE 2.09 2.19 2.39 2.79 2.99 3.19 3.69 3.79 4.59 4.79 4.89 5.79

Size (mm) Wt. (lbs.) 21 0.5 22 0.5 23 0.6 24 0.8 25 0.7 26 0.9 27 0.9 28 1.0 30 1.3 32 1.7 36 2.3 -

ITEM 8068116 8068124 8068132 8068140 8068157 8068165 8068504 8068173 8068181 8068199 8068520 -

PRICE 5.99 6.99 6.99 7.99 8.99 8.99 9.99 11.99 12.99 14.99 19.99 -

ITEM 2920393 2927507 2927515 2927523 2929156 2927549 2920373

PRICE 0.99 1.09 1.09 1.19 1.49 1.59 1.89

Wt. (lbs.) 0.3 0.4 0.6 0.7 0.7 1.0 1.4

ITEM 2927564 2927572 2927598 2927606 2920294 2929164 2927648

PRICE 1.99 2.69 3.99 4.59 4.99 7.99 9.89

ITEM 2928380 2928398 2928406 2928414 2928422

PRICE 1.19 1.19 1.39 1.49 1.49

Size (mm) Wt. (lbs.) 15 0.2 16 0.2 17 0.3 18 0.4 -

ITEM 2928430 2928448 2928455 2928463 -

PRICE 1.89 1.89 2.19 2.29 -

BOX-END WRENCH SETS

Size 11/16" 3/4" 7/8" 15/16" 1" 1-1/8" 1-1/4"

INDIVIDUAL WRENCHES

INDIVIDUAL COMBINATION WRENCHES

BOX-END WRENCHES

Chrome vanadium steel. Wt. Size (lbs.) 1/4" x 5/16" 0.1 3/8" x 7/16" 0.2 1/2" x 9/16" 0.3 5 PC 45° OFFSET SETS 5/8" x 3/4" 0.5 SAE: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 7/8" 0.8 3/4" x 25/32", and 13/16" x 7/8". 15/16" x 1" 1.4 99 2923332 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . 10 x 11 mm 0.2 12 x 13 mm 0.3 METRIC: 10 x 11, 12 x 13, 14 x 15, 16 x 17, 14 x 15 mm 0.4 and 18 x 19 mm. 99 2921138 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . 17 x 19 mm 0.5

14 14

ITEM

PRICE

8068447 8068611 8068629 8068454 8068462 8068496 8068405 8068413 8068421 8068439

2.89 3.39 3.79 6.49 8.59 11.99 3.59 3.79 4.59 6.49

279

WRENCHES/PLIERS

FLARE NUT WRENCH SETS A B

A) 3 PC SET SAE: 3/8" x 7/16", 1/2" x 9/16", and 5/8" x 11/16". 2919777 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 10 x 12, 13 x 14, and 15 x 17 mm. 2923258 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A) 6 PC SET (SHOWN) SAE: 1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 13/16", and 7/8" x 1". 8006123 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . METRIC: 6 x 8, 10 x 12, 13 x 14, 15 x 17, 19 x 22, and 22 x 24 mm. 8006132 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

899 899

15 15

PLIERS

B) 6 PC PROFESSIONAL SET • Chrome vanadium steel 99 • SAE: 3/8" x 7/16", 1/2" x 9/16", and 5/8" x 11/16" • METRIC: 10 x 12, 13 x 14, 99 and 15 x 17 mm 2920610 – Wt. 1.6 lbs. . . . . . . . . . .

2999

EXTRA LONG PLIERS C) 11" OFFSET DIAGONAL CUTTING PLIERS Cutters are curved at a 30° angle. 2920168 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 11" 45° BENT NOSE 2925543 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 11" LONG NOSE 2925527 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . F) 11" 15° OFFSET NOSE 2925568 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . G) 11" HOSE/CABLE PLIERS 2990148 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . H) 16" STRAIGHT NOSE PLIERS 2920270 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

999 999 999 999 999 1199

TECH TIPS 280

G H

NON-SLIP CUSHIONED GRIP PLIERS

K L

Wt. (lbs.) I 6" Diagonal Cutting 0.4 I 7-1/2" Diagonal Cutting 0.6 7" End Nipper 0.6 J K 6" Long Nose Cutting 0.3 8" Long Nose 0.5 L MINI-PLIERS 0.2 M 5-1/2" End Nippers 5-1/2" Diagonal 0.2 N 7" Needle Nose 0.2 O 7" 45° Bent Nose 0.2 P Type

ITEM PRICE 2929610 2929545 2929537 2929594 2929602

3.99 4.99 4.99 4.99 4.99

2920192 2920188 2920195 2920128

3.99 3.99 3.99 3.99

Pliers should not be used on nuts or bolts. A wrench will do the job better and with less risk of damage to the fastener. Also, oil pliers occasionally. A drop of oil at the hinge will lengthen tool life and assure easy operation.

PLIERS

LEVERAGE PLIERS • Unique head design creates more force with less effort • Stainless steel A) 7-1/2" DIAGONAL 8007064 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . B) 8" LINESMAN 8007065 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . C) 8" LONG NOSE 8007068 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

999 999 999

PLIERS F D

G F) 12" LINESMAN PLIERS 2920873 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . .

E D) SLIP JOINT PLIERS Size Wt. (lbs.) 6" 0.4 8" 0.6 10" 0.8

ITEM 2927853 2927861 2922664

G) GROOVE JOINT PLIERS Size Jaw Adj. Wt. (lbs.) 8" 4 0.6 10" 5 0.9 12" 6 1.1 8 3.1 49 16" 20" – 3.8

PRICE 2.49 3.99 4.99

E) 8" LINESMAN PLIERS 2929586 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

1199

ITEM PRICE 8001631 4.99 8001632 6.99 8001633 8.99 8001634 15.99 8001637 26.99

PLIERS K H

I H) 7" DIAGONAL CUTTING PLIERS 2922615 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . I) 9-1/2" NUTBUSTER™ PLIERS 1-1/8" jaw cap. 2929073 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . J) 7-3/4" CURVED DIAGONAL CUTTING PLIERS 2929107 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

19 19 23

K) TONGUE and GROOVE PLIERS No. of Jaw Jaw Wt. Size Adjustments Cap. (lbs.) ITEM 99 9-1/2" 5 1-1/2" 0.8 2926285 10" 7 2" 1.0 2926293 12" 7 2-1/4" 1.3 2926301 16" 8 4-1/4" 2.8 2926319 99 L) 9-1/2" LINESMAN PLIERS With crimper, fish tape puller, 99 and wire stripper. 8155244 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

PRICE 14.99 16.99 17.99 33.99

3699

9" AUTO-ADJUSTING PLIERS

10" DURAPLIERS

• Texture air • Heat treated steel cushioned grip provides excellent comfort • Automatically adjusts to the size required • Box joint design reduces slippage compared • Spring-loaded jaws provide easy one-handed to conventional tongue and groove pliers operation • Multiple position jaw provides flexibility • Ergonomic handle with vinyl grip provides for a wide range of applications maximum gripping comfort • Jaw cap.: 1-3/4" 99 • Jaw cap.: 1-1/2" 99 2920422 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . 8159410 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

281

PLIERS/RETAINING RING PLIERS

WIRE TWISTER

8" MULTI-USE PLIERS

• Chrome vanadium steel • Gives a perfect, uniform twist every time • Includes: 4 sizes of small bolt cutter, in a continuous one-handed operation 5 wire stripping sizes, 2 sizes • Ratcheting action eliminates need to shift hands multi-crimping devices • No pushing necessary • Lock has automatic squeeze release 99 8160012 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . 2919025 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

QUICK RELEASE GROOVE JOINT PLIERS

PALM NIPPER

• Ideal for cutting soft copper and aluminum wires up to 1.5 mm • Ideal for jewellers 8169740 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

RETAINING RING PLIERS

1299

299

• A6 type quick release groove joint pliers • Chrome vanadium, soft grip handle 8" PLIERS 8191983 –Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 10" PLIERS 8191991 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 12" PLIERS 8192007 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . .

999 1299 1499

SNAP RING PLIERS HEAVY-DUTY SNAP RING PLIERS • Reversible action for internal and external snap rings • Includes 10 sets of interchangeable tips: (0.06" to 0.125" in 15° and 75°) 2920133 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3999

SNAP RING PLIERS F

C A

INDIVIDUAL SNAP RING PLIERS Chrome vanadium steel with knurled tips. Wt. Style (lbs.) ITEM PRICE A Straight Nose Internal 0.3 8007373 4.99 B Straight Nose External 0.3 8007382 4.99 C Bent Nose External 0.3 8007391 4.99 0.3 8007408 4.99 D Bent Nose Internal 4 PC SNAP RING PLIER SET Contains items A through D. 99 8007364 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . E) SNAP RING PLIER SET • 4 interchangeable internal or external tips • Tips: straight, 90° and 45° • Range: 3/8" to 1" (10 to 25 mm) 49 8007417 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) 4 PC MINI SNAP RING PLIER SET • Contains straight and bent internal and external pliers • Ideal for narrow spaces 99 8031532 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

282

H G) 14" SNAP RING/LOCK RING PLIER • Has both serrated angled flat tips and 90° tips with retaining screws • Designed for external lock rings used in truck and tractor transmissions • 2-5/8" max. spread 99 8006659 – Wt. 1.3 lbs. . . . . . . . . . . . . . . H) SNAP RING PLIERS KIT • Change from external to internal snap ring pliers by simply pushing and turning the handle • Includes 4 pairs of straight and bent nose tips, plus hex key to install tips 99 2921385 – Wt. 1.0 lbs. . . . . . . . . . . . . . .

• Switch between internal and external with easy to use lever action • Internal: 3/8" - 2" • External: 1/4" - 2" • Includes 5 pairs of interchangeable tips 8182255 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

• For external ring sizes up to 3-3/4", and internal ring sizes up to 4" • Features replaceable tips, spring ratchet locking mechanism to hold snap ring securely 99 99 8006613 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . .

10 PC SNAP RING PLIER SET 5-1/2" bent plier and 6" straight plier (tip 0.038"), 5-1/2" bent plier and 6" straight plier (tip 0.047"), 7-1/2" bent plier and 8" straight plier (tip 0.070"), 8-1/2" bent plier and 9" straight plier (tip 0.090"), 5" hook and 5" pickup tool, storage case. 99 8158792 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . . .

LOCKING PLIERS & CLAMPS LOCKING PLIERS A) LONG NOSE LOCKING PLIERS With wire cutters. Size Wt. (lbs.) ITEM 5" 0.4 8028975 7" 0.7 8028984 10" 1.2 8028993

SNAP RING PLIERS/LOCKING PLIERS

HEAVY DUTY LOCKING SNAP RING PLIERS KIT

CHANNELLOCKTM 8" SNAP RING PLIERS

PRICE 4.99 5.99 6.99

B) SHEET METAL CLAMP Jaw width: 3-3/4". 2919710 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

C) LOCKING C-CLAMP PLIERS Wt. Size Jaw Adj. Inner Dia. (lbs.) ITEM PRICE 11" 0 - 3-1/2" 3" x 3-3/4" 1.5 2919538 8.99 18" 0 - 7" 9-3/4" x 4" 2.7 2919736 11.99 D) INDIVIDUAL CURVED JAW LOCKING PLIERS With wire cutters. Size Wt. (lbs.) ITEM PRICE 5" 0.4 2920916 4.99 7" 0.8 2920915 5.99 10" 1.2 2920914 6.99

999 E

G F

E) INDIVIDUAL STRAIGHT JAW LOCKING PLIERS With wire cutters. Size Wt. (lbs.) ITEM PRICE 5" 0.4 2920911 4.99 7" 0.8 2920912 5.99 10" 1.2 2920913 6.99

F) 9" LOCKING CHAIN WRENCH 18" chain. 2920908 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . G) LOCKING BAR CLAMP PLIER 6-1/2" jaw width with 3" throat depth. 2920683 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . .

SHEET METAL CLAMP

LOCKING WELDING CLAMP PLIERS

1299 1299

9" CLAMP Jaw width: 1-5/8". 2920783 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . • Makes bending, forming, and crimping easier 14" CLAMP • Jaw width: 3-1/8" 99 Jaw width: 2-3/4". 2911774 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . 2920685 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . .

699

1299

283

LOCKING PLIERS/CLAMPS

LOCKING PLIERS

• Built tough to last a lifetime • High grade alloy steel heat treated for maximum toughness and durability A) 10" STRAIGHT JAW LOCKING PLIERS • Straight jaws allow for max. contact on flat, square, or hex surfaces • Jaw adjustment: 0 to 1-5/8" 99 2911725 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . B) CURVED JAW LOCKING PLIERS with WIRE CUTTER Cuts up to 1/4" bolt. Jaw Wt. Size ITEM PRICE Adjustment (lbs.) 5" 0 to 1-1/4" 0.4 2911766 11.49 7" 0 to 1-5/8" 0.8 2911758 12.49 10" 0 to 1-7/8" 1.2 2911741 13.49

LOCKING CLAMPS

D C) LONG NOSE LOCKING PLIERS with CUTTER • Long straight nose allows for use in narrow spaces not reachable by curved or straight jaws • Cuts up to 1/4" bolt Jaw Wt. Size Adjustment (lbs.) ITEM PRICE 6" 0 to 2-1/4" 0.4 2917052 15.99 9" 0 to 2-7/8" 0.8 2918613 18.49 D) 12" LARGE JAW LOCKING PLIERS • Heavy-duty jaw grips around work of all shapes • Jaw adjustment: 0 to 3-1/8" 49 2925451 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . .

F G

E) 11" LOCKING CLAMP • Jaw adjustment: 0 to 4" • Throat depth: 9-1/2" 2911790 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . E) 18" LOCKING C-CLAMP • Jaw adjustment: 0 to 7-1/2" • Throat depth: 9-1/2" 2920624 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . .

24 44

F) 11" LOCKING C-CLAMP with SWIVEL PADS • Jaw adjustment: 0 to 3-7/8" 99 • Throat depth: 2-5/8" 99 2919298 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . G) 9" LOCKING CHAIN CLAMP • Holds and locks around any shape and size 99 • 18" chain 99 2910023 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

25 34

SPRING CLAMPS

CLAMPS

REVERSED

QUICK RELEASE RATCHETING BAR CLAMPS / SPREADERS

• Throat depth: 2-1/2" • Provides 100 lbs. of clamping pressure Size Wt. (lbs.) ITEM PRICE 4" * 0.2 8070260 2.79 6" 1.2 8002843 5.99 12" 1.5 8002139 6.99 24" 2.0 8002140 8.99 36" 2.7 8066961 11.99 * Throat depth: 1-5/8".

60" DEEP REACH BAR CLAMP

284

• Lightweight aluminum construction • 3" throat depth • Quick release rear jaw • Bar has 1" spaced positive jaw stops 8016844 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . .

H J H) SPRING CLAMPS 4" CLAMP – 1-1/2" jaw opening. 69 2925287 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 6" CLAMP – 2-1/2" jaw opening. 49 2925295 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . I) 4 PC SPRING CLAMP SETS 2" MINI SET – Strong spring. 79 2910068 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 4" SET – 1-1/2" jaw opening. 99 2920019 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . J) FLEX JAW SPRING CLAMPS Depth Length Wt. (lbs.) ITEM PRICE 1" 4" 0.1 2920040 1.49 2" 6" 0.3 2920005 2.49 3" 9" 0.3 2920041 3.49

1 2 2 4

6" SPRING CLAMP

• Specially shaped to accommodate round objects 99 • 2" jaw opening 2910750 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

CLAMPS

C-CLAMPS

C-CLAMPS B B

A Opening a b 2" 1" 3" 2" 4" 3" 6" 3" 8" 3"

Wt. (lbs.) 0.2 0.7 1.6 2.5 3.7

ITEM

PRICE

2912384 2912392 2912400 2912418 2912426

3.49 6.99 9.99 14.99 18.99

A Opening Wt. (lbs.) a b 2" 1" 0.4 3" 1-1/2" 1.1 4" 1-1/2" 1.3 5" 2" 1.3 6" 2-3/4" 2.0 8" 3-1/4" 3.6 10" 3-1/8" 4.7

HEAVY-DUTY ADJUSTABLE BAR CLAMPS

ITEM

PRICE

2910503 2910278 2910511 2910279 2910529 2920555 2920556

2.49 2.89 3.99 4.99 6.49 8.99 12.99

PLASTIC C-CLAMP with QUICK RELEASE • Load limit: 1,000 lbs. • Throat depth: 3" • Solid maple handle and durable plastic pads 6" CLAMP 99 8041889 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . 12" CLAMP 99 8041852 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . 24" CLAMP 99 8041825 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . 36" CLAMP 99 8041656 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . .

13 14 18 19

4" CLAMP 8006955 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

TOGGLE CLAMPS B

• U-bar, flange base • A3 steel

A A B C ITEM 2910348 2910966 2910349 2910982 2910350 2910351

PRICE 4.99 5.49 5.99 6.49 7.49 7.99

ADJUSTABLE BAR CLAMPS • Throat depth: 2-1/2" • Quick release rear jaw • Removable plastic tips Opening Wt. (lbs.) 6" 1.2 12" 1.5 18" 1.6 24" 1.9 30" 2.2 36" 2.3

349

Wt. Handle Capacity (lbs.) Vert. 100 lbs. 0.1 Vert. 330 lbs. 0.7 Horiz. 550 lbs. 0.6 T 150 lbs. 0.1

ITEM

PRICE

8156432 8156457 8156424 8156440

4.99 8.99 7.99 4.99

PLASTIC RATCHET CLAMPS Swivel tips. 6-1/4" 8006960 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 9" 8006958 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

399 499

STEEL PIPE CLAMP FIXTURE

STEEL PIPE CLAMPS • Make your own clamp length • Use ordinary 1/2" or 3/4" black pipe with standard pipe threads on both ends 1/2" PIPE CLAMP 8003389 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 3/4" PIPE CLAMP 8003390 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Use ordinary 3/4" black pipe as bar (sold separately) • No holes, notches or rivets required to assemble 99 • Multiple disc clutch grips bar automatically at any point 99 99 • Clamp face is 1-3/4" square 2912459 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . .

8 9

“F” STYLE CLAMPS Size Wt. (lbs.) 6" x 2-3/8" 1.0 12" x 2-3/8" 1.3

ITEM 8145401 8145419

PRICE 8.99 10.99

285

CLAMPS/THREAD REPAIR

ADJUSTABLE SUPPORT ROD

• Supports 99 lbs. vertically and 60 lbs. at 45° • Ideal for large spaces • Height adjusts from 3 ft. 9" to 9 ft. 6" where you need an extra hand (45" to 114") • Supports 110 lbs. at vertical and 55 lbs. at 45° • Ratcheting system to extend moveable shaft • Ratchet mechanism • Stationary shaft is adjustable to 4 different • 5 ft 3" to 9 ft 5" (63" to 113") lengths 99 99 8026824 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . . . . 8143208 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . .

1" HEXAGON DIES

THREAD REPAIR TAPS A A) T-TAP WRENCH B #4 to 1/4" TAPS 89 3408465 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 1/4" to 1/2" TAPS 99 8141079 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

5 9

B) TAPS Size 4-40 NC 6-32 NC 8-32 NC 10-24 NC 10-32 NF 1/4"-20 NC 1/4"-28 NF 5/16"-18 NC 3/8"-16 NC 1/2"-13 NC 1/8"-27 NPT 1/4"-18 NPT

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1

SCREW EXTRACTOR SETS

ITEM 3406295 3406303 3406311 3406329 3406337 3406386 3406394 3406402 3406428 3406469 3406485 3406493

PRICE 2.99 2.99 3.49 3.49 3.49 3.49 3.49 4.49 4.99 6.49 5.49 6.49 D

High carbon steel construction. Size Wt. (lbs.) ITEM PRICE 3/8"-16 NC 0.1 8030784 4.99 1/2"-13 NC 0.1 8030828 4.99 1/8"-27 NPT 0.1 8030837 4.99 1/4"-18 NPT 0.1 8030846 7.99

3 PC TAP WRENCH SET Sizes: 1/16" to 5/32", 5/32" to 1/4", and 1/4" to 1/2". 8150724 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . .

999

TAP WRENCH

• Will hold #4 to 3/8" taps • O’all length: 11" 3400155 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

DIE HOLDER

For use with 1" round and hex dies. 3408069 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

E C) 6 PC SET 5 PC SUPER • Sizes: #1 to #6 for use on 1/8" to 1/2" fasteners OUTS • Spiral flute 99 2920311 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . • Extract 1/4" to 1/2" D) 8 PC SET and larger bolts, studs, and screws • Sizes: #1 to #8 • Works on left and right hand threads • Made of mild carbon steel 99 2915171 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 8133068 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 5 PC SET 5 PC BOLT • For use on 3/16" to 5/8" fasteners • Made of chrome moly steel EXTRACTOR SET • Hardness: HRC 50 min. 99 8019912 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . Extracts 1/4" to 5/8" bolts. 2926491 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . THREAD

899

7 9

GAUGE

286

2199

1999

UNIVERSAL

• 26 SAE pitch THREAD measurements from 4 to 42 threads per inch GAUGE SET • 26 Metric pitch measurements from 0.25 to 6 mm 49 2940117 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 8006309 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

12 PC SETS • High strength tungsten alloy construction • Rockwell hardness of HRC 60 • Adjustable tap wrench • Die handle • Storage case SAE: Includes 1 tap and die for these sizes: 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, and 1/2"- 13 NC. 99 8039954 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . METRIC: Includes 1 tap and die for these sizes: M6 x 1.0, M7 x 1.0, M8 x 1.25, M10 x 1.5, and M12 x 1.75. 99 8039963 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . 39 PC SETS • 1" hex dies for easier threading • High strength tungsten alloy construction • Rockwell hardness of HRC 60 • Includes: adjustable tap wrench, die handle, screwdriver, screwpitch gauge, and storage case SAE: Includes 1 tap and die for these sizes: #4-40, #6-32, #8-32, #10-24, #10-32, #12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, and 1/8" NPT-27. 99 8039981 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . METRIC: Includes 1 tap and die for these sizes: M3 x 0.8, M3 x 0.6, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 1.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 5, M12 x 1.75, and 1/8" NPT-27. 99 8039972 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . .

19 19

THREADED INSERT INSTALLATION KIT

45 PC TUNGSTEN TAP and DIE SETS • Contains large sizes up to 1" (M24) • Heat treated tungsten alloy steel construction • Rust resistant satin finish • 1 die holder with adapter to hold smaller dies • Adjustable tap wrench and T-handle tap wrench • Screwdriver and storage case SAE: Includes 1 tap and die for these sizes: 1/4"-20 NC, 1/4"-28 NF, 5/16"-18 NC, 5/16"-24 NF, 3/8"-16 NC, 3/8"-24 NF, 7/16"-14 NC, 7/16"-20 NF, 1/2"-13 NC, 1/2"-20 NF, 9/16"-12 NC, 9/16"-18 NF, 5/8-11 NC, 5/8"-18 NF, 3/4"-10 NC, 3/4"-16 NF, 7/8"-9 NC, 7/8"-14 NF, 1"-8 NC, 1"-14 NF. 99 3410274 – Wt. 14.4 lbs. . . . . . . . . . . . . . . . . . METRIC: Includes 1 tap and die for these sizes: M6 x .75, M6 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75, M14 x 1.5, M14 x 2.0, M16 x 1.5, M16 x 2.0, M18 x 1.5, M18 x 2.5, M20 x 1.5, M20 x 2.5, M22 x 1.5, M22 x 2.5, M24 x 1.5, and M24 x 3.0. 99 8005712 – Wt. 14.7 lbs. . . . . . . . . . . . . . . . . .

THREAD REPAIR/BOLT CUTTERS

TUNGSTEN ALLOY TAP and DIE SETS

BOLT CUTTERS A B

• Installs threaded insert into sheet metal similar to the way pop rivets are inserted • Includes insertion tool and 40 inserts SAE KIT 10 of each size: #6-32, #8-32, #10-24, and 1/4"-20 (NC) machine thread. 99 2925204 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . REPLACEMENT INSERTS Wt. Pcs Type (lbs.) ITEM PRICE 20 ea.: #6-32, #8-32, 0.2 80 #10-24, 2925501 17.99 1/4"-20 (NC) 100 1/4"-20 (NC) 0.3 2921872 19.99

2 PC NUT SPLITTER SET

A) 8" MINI BOLT CUTTERS • Heat treated drop forged jaws • General purpose for cutting bolts, screws, wire, etc. • For non-ferrous metals like copper, brass, aluminum, silver, plastic, and mild steel 99 8044029 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

B) HEAVY-DUTY BOLT CUTTERS • Chrome vanadium cutting blades • Compound cutting action • Long handles for greater leverage Size Wt. (lbs.) ITEM 18" 3.6 8043878 24" 6.1 8043887 36" 12.6 8043896

PRICE 19.99 29.99 39.99

STUD REMOVER

• Remove damaged nuts without bolt thread damage • Suitable for up to grade 5 (8.8 metric) nuts • 1/4" to 3/4" dia. studs • 3/16" to 3/4" and 9/16" to 1-1/16" cap. 99 • Use with 1/2" dr. ratchet 2919587 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . 2925113 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . .

1499

287

CABLE CUTTERS/RIVETERS & FASTENERS

18" CABLE CUTTER

9-1/2" CABLE CUTTER

2999

8003749 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . . . .

8068686 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

RIVETERS

RIVETERS & FASTENERS

A) 10" HAND RIVETER • 4 nose pieces (3/32", 1/8", 5/32", and 3/16") • Rubber grip 99 2920929 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) SWIVEL HEAD RIVETER • Head rotates 360° • Spring loaded handle for easy rivet loading and ejection • Extended nose for hard-to-get places • 4 nose pieces (3/32", 1/8", 5/32", and 3/16") • Includes wrench 99 2920930 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . C) 18" RIVETER • 4 nose pieces (1/8", 5/32", 3/16", and 1/4") • Long handles help where extra reach is required • Ideal for use with larger rivets 99 8048882 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . D) 21" LONG HANDLED RIVETER • 5 nose pieces (1/8", 5/32", 3/16", 7/32", and 1/4") • Easily sets large rivets including 1/4" all steel and split rivets • Extra long handles for single stroke setting of rivets used on door handles, window regulators, and other body shop applications 99 2922078 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . . . .

TWISTER™ PROFESSIONAL RIVET TOOL

RIVETS

CARDED RIVETS – Wt. 0.1 lbs. Dia. Thick Qty. 1/8" 1/8" 25 1/8" 1/4" 20 1/8" 1/2" 15 3/16" 1/8" 18 3/16" 1/4" 15 3/16" 1/2" 12 ALUMINUM

• 4 nose pieces (3/32", 1/8", 5/32", and 3/16") • Head rotates 360° • Spring loaded handle for easy rivet loading and ejection • Extended nose for hard-to-get places • Includes wrench 99 2920392 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

BOX RIVETS Dia. Thick 1/8" 1/8" 1/8" 1/4" 1/8" 1/2" 1/8" 1/8" 1/8" 1/4" 1/8" 1/2" 3/16" 1/8" 3/16" 1/4" 3/16" 1/2" ALUMINUM

• For use with rivets and threaded inserts Includes: • Rivet head with 3/32", 1/8", 5/32" and 3/16" nosepieces • Threaded insert rivet head with mandrels to fit #6-32, #8-32, #10-24 and 1/4"-20 machine thread 8150716 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . .

STEEL

ALUMINUM

10" MULTI-PURPOSE RIVETER

288

Wt. 0.1 0.1 0.1 0.3 0.3 0.4 0.1 0.2 0.2

ITEM PRICE 3860021 5.49 3860022 5.99 3860023 7.99 3860029 5.49 3860024 5.99 3860025 7.99 3860026 4.99 3860027 5.49 3860028 6.49

ALUMINUM BACK-UP PLATES – 30 pcs. per card. Wt. 0.1 lbs.

3860018 – 1/8" DIA. 3860019 – 3/16" DIA. . . . . . . . . . . . . . . . . . .

199/pk.

ALUMINUM RIVETS 100 PCS – Wt. 0.2 lbs. 8056194 – 1/8" x 1/4" . . . . . . . . . . . . . . . . . .

399/pk.

STEEL RIVETS 100 PCS – Wt. 0.3 lbs. 99 /pk. 8161739 – 1/8" x 1/4" . . . . . . . . . . . . . . . . . .

399/pk.

RIVETS ALUMINUM RIVETS 50 PCS – Wt. 0.3 lbs. 8161754 – 3/16" x 1/8" 8056178 – 3/16" x 1/2" 8056210 – 3/16" x 1/4" . . . . . . . . . . . . . . . . .

Qty. 100 100 100 100 100 100 50 50 50

ITEM PRICE 3860015 1.49 3860016 1.49 3860017 1.49 3860032 1.99 3860030 1.99 3860031 1.99

HANDHELD 3-IN-1 NAILER/STAPLER

“U”

GATE

Wt. 0.2 lbs.

Size 6 mm 8 mm 10 mm 12 mm 14 mm 10 mm 12 mm

ITEM 8131245 8131252 8131260 8131278 8131286 8131294 8131302

PRICE

199

REPLACEMENT NAILS – 1,000 PC Wt. 0.3 lbs.

Size 10 mm 12 mm

ITEM 8131310 8131328

PRICE

199

• Comes with 200 crown staples, 200 u-staples, and 200 nails • For 10 mm crown staples with 4 mm to 14 mm leg length • For U-shaped staples with 10 mm to 12 mm leg length • For 10 mm to 14 mm long nails 8123739 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

HAMMER TACKER

• Uses Arrow T50 style and equivalent 6-12 mm staples • Useful for quick tacking of roof sheeting and vapor barrier 8208944 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . .

1199

HEAVY DUTY STAPLE REMOVER

• Dual colour plastic handle design • Heat treated steel for durability 8211120 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

FASTERNERS AND TIN SNIPS

REPLACEMENT STAPLES – 1,000 PC

399

TIN SNIPS

TIN SNIPS TIN SNIPS

10" AVIATION SNIPS Chrome vanadium blades. STRAIGHT CUT (YELLOW HANDLE) 2920949 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . LEFT CUT (RED HANDLE) 2920948 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . RIGHT CUT (GREEN HANDLE) 2920947 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Chrome moly steel • Cuts up to 18 gauge metal STRAIGHT CUT (YELLOW HANDLE) 8142945 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . LEFT CUT (RED HANDLE) 8142952 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 RIGHT CUT (GREEN HANDLE) 8142960 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

3 399 OFFSET AVIATION 399 SNIPS

899 899 899

RATCHETING SHEAR Wt. 0.9 lbs.

2910178 – RIGHT/STRAIGHT CUT 2910179 – LEFT/STRAIGHT CUT . . . . . . . . . • 3/4" dia. max cutting capacity • High carbon tool steel blade with anti-corrosion coating 8159170 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

TECH TIPS

1799

10" TIN SNIPS

799

Use snips for cutting soft metal only. Hard or hardened metal may damage the cutting edges of the snips.

• Cuts steel, aluminum, rubber, plastic, leather, carpets, etc. • Induction hardened tool steel HRC-58-60 • Cuts up to 22-gauge sheet metal 8043903 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

1299

289

PUNCHES & CHISELS

5" AUTOMATIC CENTRE PUNCH

PUNCHES & CHISELS 5 PC 4" CENTRE PUNCH SET

• One hand use • Create drill centre or locate points on layout boards • Under compression, tip recoils into work • Adjustable power 2910208 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

Sizes: 1/16", 1/8", 5/32", 3/16", and 1/4". 2920301 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

AUTOMATIC CENTRE PUNCH

599

TAPER PUNCH SETS

• Special hardened tip for instant marking • No hammer required, spring loaded barrel 8009237 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

POCKET AUTOMATIC CENTRE 5 PC TAPER PUNCH SET Sizes: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", PUNCH 3/16" x 6-1/4", and 1/4" x 6-3/4". 99 2920897 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . 4 PC LONG TAPER PUNCH SET (SHOWN) • Light weight aluminum body with Sizes: 3/16" x 8", 3/16" x 12", 1/4" x 12", high carbon centre tip and 1/4" x 14-3/4". 99 • With pocket clip 8061640 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 2920900 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . .

799

10 13

INDIVIDUAL PUNCHES and CHISELS CHISELS with HAND GUARD Ergonomically designed grip absorbs shock and O’all Wt. Description Length (lbs.) ITEM PRICE protects hand. COLD CHISELS CHISELS - COLD STEEL E) 3/4" x 12" 3/8" 5-1/2" 0.2 2910076 4.49 A 99 2910366 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . 1/2" 6" 0.2 2942605 4.49 A 3/4" 7" 0.5 2942621 5.99 A F) 1" x 8" 99 A 3/4" X-Long 12" 1.1 2910078 9.99 2929917 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . 12" 1.5 2910079 12.99 A 1" X-Long G) 1" x 12" 99 PUNCHES 2910080 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . 0.2 2910083 5.99 B 5/32" Aligning 9" MASON CHISEL B 1/4" Aligning 12" 0.9 2910086 9.99 H) 2-1/4" x 7-1/2" 99 1/8" Pin 4-3/4" 0.1 2910085 3.99 C 2920399 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . C 3/16" Pin 5-1/4" 0.1 2942670 4.49 BRICK CHISELS 5" 0.2 2910087 3.99 D 3/8" Centre 6" 0.4 2910088 4.99 D 1/2" Centre I) 3" x 8" 99 2910367 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . 4 PC I) 4" x 7-1/2" 99 2920398 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . NAIL SET • Sets nails below surface of wood CHISELS • Sizes: 1/32", 2/32", 3/32", 1/8" 49 with HAND 8178162 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

12 12 15 13 11 15

4 PC MINI CHISEL SET 290

• Stainless steel • 3/32", 1/4", 3/8", and 5/8" dia. chisel heads 8119794 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

GUARD

1" 8006282 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 2-3/8" 8006281 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

699 799

B A) 5 PC 8" PIN PUNCH SET Sizes: 1/8", 3/16", 1/4", 5/16", and 3/8". 99 2970140 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . B) 6 PC PUNCH SET (SHOWN) • Five pin punches: 3/32" x 4-1/2", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", and 1/4" x 5-3/4" • One centre punch: 3/16" x 6" • Chrome vanadium steel 99 2920896 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . B) 9 PC PIN PUNCH SET • Sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8" • 4" length 99 2920557 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

D C) 3 PC SOLID BRASS PUNCH SET • Non-sparking solid brass construction prevents damage to object being struck • Includes: 2 pin punches (1/4" x 4" and 3/8" x 6") and 1 drift punch (1/2" x 8") 99 2920202 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . D) 8 PC SOLID BRASS PIN PUNCH SET • Sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" punches • All are approx. 3-1/2" long 99 8016906 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . .

PUNCHES & CHISELS

BRASS PUNCH SETS

PIN PUNCH SETS

HOLLOW PUNCH SETS

9 PC 4" PUNCH SET 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8". 8139289 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

499 E) 6 PC SET Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2". 2926699 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

28 PC TRANSFER PUNCH SET • Heat-treated tempered tool steel with industrial black oxide finish • 0.0025" dia. undersize for easy use • 4-7/8" long punches: 3/32" to 1/2" size increments (in 64ths), and handy 17/32" • Ideal for tool makers and machinists • High visibility stand included 99 2924785 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . .

3 PC COLD CHISEL SET Sizes: 3/8" x 5-1/2", 1/2" x 6", and 5/8" x 6-1/2". 2920898 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

499

F) 12 PC SET Sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", and 3/4". 99 2920169 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . .

COLD CHISELS

• Drop forged chrome moly steel • Octagonal shank • Handle with safety guard 1-1/8" x 3/4" x 11-9/16" 8104119 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . 99 1-1/8" x 3/4" x 15-9/16" 8104127 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . .

999 1499

PUNCH & CHISEL SETS 16 PC PUNCH and CHISEL SET • Includes: 5 taper punches, 5 pin punches, 2 centre punches, 3 cold chisels, and 1 chisel punch gauge • 4-1/2" to 6-3/4" long • Chrome vanadium steel 99 2990711 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . 21 PC PUNCH and CHISEL SET 12 PC JUMBO PUNCH and CHISEL SET (SHOWN) • Includes: 5 cold chisels, 6 taper punches, • Drop forged, heat treated 7" to 11" 6 pin punches, and 4 centre punches • 4 cold chisels, 2 cape chisels, 2 taper punches, • 4-1/2" to 7" long 3 centre punches, and 1 pin punch 99 • Chrome vanadium steel 99 2990065 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . 2920899 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . .

291

HAMMERS

WAVEX ANTIVIBRATION BALL PEIN HAMMERS

HAMMERS BALL PEIN HAMMERS

Fibreglass handle. Head Weight Wt. (lbs.) 8 oz. 1.5 12 oz. 1.5 16 oz. 1.7 24 oz. 2.6 32 oz. 2.6

ITEM PRICE 8002841 4.99 8002839 5.49 2920166 6.49 2920167 9.99 2924595 12.99

16 OZ BRASS HAMMER

CLUB HAMMERS

Fibreglass handles. 48 OZ 2910014 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . 64 OZ 2910015 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . .

• Patented design absorbs vibration through the entire handle to reduce shock to the hand and arm • Soft ergonomic grip • Tough and durable alloy steel head Head Weight Wt. (lbs.) ITEM PRICE 16 oz. 1.6 8035818 14.99 24 oz. 2.3 8035867 17.99 32 oz. 2.7 8035875 19.99

13 15

• Non-sparking • Soft brass head allows some give when hammering • Fibreglass handle 99 2920959 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . 99

CLAW HAMMERS

1999

WAVEX HAMMERS

C B Fibreglass handles. A) 16 OZ CLAW HAMMER (SHOWN) 2945194 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . A) 16 OZ CLAW HAMMER With magentic nail starter. 8191967 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 24 OZ FRAMING HAMMER Milled face. 2945186 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

599 899

D E

999

• Recognized by the Canadian Physiotherapy Association DOUBLE FACED • Mirror polish alloy steel head • Comfortable ergonomic soft grip SOFT MALLETS • Meets ANSI specifications • Patented waves significantly reduce harmful shock to the hand and arm F • Extra soft grip for increased comfort and G enhanced shock absorption • Alloy steel induction hardened for superior toughness and durability H C) 20 OZ CLAW HAMMER 11" handle. 8120545 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . • Black rubber head for a cushioned strike and D) 20 OZ RIPPING HAMMER high impact yellow plastic head for a positive 10-3/4" handle. strike 8103178 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . • Metal handles have rubber coating for better E) FRAMING HAMMERS grip 13-1/2" handles. O’all Wt. Head Handle Length (lbs.) ITEM PRICE 22 OZ 8120594 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . F 3/4" Wood 8-3/8" 0.2 2925477 3.99 28 OZ G 1-3/8" Metal 11-3/8" 1.0 2925485 4.49 8147522 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . H 1-1/2" Metal 11-1/2" 1.4 2925493 5.99

1899 1899

292

1999 2499

HAMMERS

RUBBER MALLETS

DEAD BLOW HAMMERS

B Soft face head with rubber coated plastic handle. Head Size Wt. (lbs.) ITEM PRICE 16 oz. 1.4 2943280 8.99 24 oz. 1.8 2943298 10.99 32 oz. 2.1 2943322 11.99 48 oz. 3.0 2943314 14.99

C A) FIBREGLASS HANDLE Head Wt. (lbs.) ITEM PRICE 16 oz. 1.4 2940083 6.99 24 oz. 2.2 2940084 7.99 32 oz. 2.6 2920305 8.99 B) WOODEN HANDLE Head Wt. (lbs.) ITEM PRICE 12 oz. 1.1 2920989 3.99 24 oz. 1.8 2940185 4.99 C) METAL HANDLE with RUBBER COATING Head Wt. (lbs.) ITEM PRICE 16 oz. 1.3 2944486 4.99

CROSS PEIN HAMMERS

Fibreglass handle. Head Weight Wt. (lbs.) 28 oz. 2.5 35 oz. 3.2

ITEM 2940081 2940079

PRICE 9.99 12.99

HATCHET with NAIL PULLER

8 LB DEAD BLOW HAMMER • 30" PVC handle with fibreglass core • Rubber wrapped grip 8145542 – Wt. 11.1 lbs. . . . . . . . . . . . . . . . . . .

HANDLE REPAIR WEDGES

13" long. 8005943 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

3 LB BRASS SLEDGEHAMMER

HOBBY HAMMER

• 7-7/16" steel hammer with threaded 2-sided head • Includes 6 interchangeable heads: brass, nylon, ball pein, chisel, flat steel, oval 8037929 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

• Non-sparking • 14-1/2" long with fibreglass handle • Head allows some give when hammering 8187668 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 99

4999

SLEDGE HAMMERS

E G F D) WOOD and STEEL REPAIR WEDGES Pkg. contains 1 wood and 2 steel wedges. Wt. 0.1 lbs.

2943488 – SINGLE BIT AXE WEDGE 2943504 – SLEDGE HAMMER WEDGE 2943512 – SHORT HAMMER WEDGE . . . E) HAMMER HANDLE WEDGES • Pkg. of 4 different sized metal wedges • 21/32" to 1-1/8" long 3808771 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

Head Length Handle Wt. (lbs.) ITEM PRICE 6 lbs. 32" Hickory 7.6 8162976 24.99 F 10 lbs. 35" Hickory 11.6 8162984 29.99 6 lbs. 32" Fibreglass 8.7 2920162 26.99 49 G 8 lbs. 32" Fibreglass 10.6 2920163 24.99 12 lbs. 32" Fibreglass 14.0 2920165 29.99

MULTIPURPOSE HAMMER

149

4-1/2" WOODEN MALLET 5” long. 8202632 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

• 600 grams • Fibreglass handle 8218109 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . .

1099

293

HANDLES/SPLITTING TOOLS/PRY BARS

FIBREGLASS SLEDGE HANDLE

AXE SHEATH

• 34" replacement maul/sledge handle with epoxy kit • For 6 to 8 lb. and some 8 to 24 lb. sledges • Polypropylene covering over a solid fibreglass rod Fits 3 lb. (2910012) and 4 lb. (2910011) axes. • Non-slip safety grip 99 8185340 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . 8147605 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . .

Type of Handle 13 oz. 16 oz. 8-12 oz. 16-20 oz. 32-48 oz. 32-48 oz. 56 oz. 1-1/4 lb. 6-8 oz. 6-16 lb. 3-5 lb.

HICKORY HANDLES

Usage Claw Hammer Claw Hammer Machinist/Ball Pein Machinist/Ball Pein Machinist/Ball Pein Blacksmith/Plow Blacksmith/Plow Boy Scout Axe Sledge Sledge/Maul Axe Handle

Length Wt. (lbs.) 13" 0.3 14" 0.4 12" 0.2 14" 0.4 18" 0.6 14" 0.5 16" 0.6 14" 0.4 30" 1.0 32" 1.3 36" 1.6

499

ITEM PRICE 2940126 3.59 2940127 3.79 2943108 3.79 2943116 3.79 2943132 3.99 2943140 3.79 2943157 4.99 2940129 4.49 2940124 8.99 2943066 9.99 2943074 11.99

SPLITTING TOOLS A

Fibreglass handle. A) 3 LB AXE 2910012 – Wt. 5.9 lbs. . . . . . . . . . . . . . . . . . . . . A) 4 LB AXE 2910013 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . . . B) 8 LB SPLITTING MAUL 2910011 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . . . C) 5 LB CLAY PICK 8212425 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . D) 5 LB PICKAXE 8212433 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . .

B D C

1999 2499 2999 1999 1999

PRY BARS

F G H

I J K

M N Description

294

Lining Pry Bar

Flat Pry Bar

G H I

4 Pc. Heel Pry Bar Set Pry Bar Mini Pry Bar

Hex Shaped Pry Bar

Octagon Stock Stripping Bar Polished Claw Tips and Prying Tip

Chisel Tip Crowbar

M N

Crowbar Pry Bar

O’all Dim. 24" long 36" long 48" long 60" long 12" long 16" long 24" long 6", 12", 16", & 20" long 16" long 7-1/2" long x 1" wide 24" long 36" long

Wt. (lbs.) 2.5 4.0 11.4 13.1 1.0 1.2 1.8 3.8 1.4 0.3 2.9 4.1

48" long x 1"

11.2

2940121

22.99

51" long 61" long 60" x 2-3/8" chisel end 18" long

11.5 15.1 14.5 1.0

8096174 8096182 2970203 2942845

22.99 29.99 29.99 4.99

ITEM PRICE 2943637 11.99 2944635 13.99 2940112 19.99 2940120 28.99 2910221 4.99 2910224 5.99 2910226 7.99 2919546 11.99 2942357 5.99 2970142 2.99 2940146 6.99 2940161 8.99

4 PC PRY BAR SET

• Extendable from 22" to 33" • 1-1/8" wide chisel • Drop forged chrome vanadium steel with heat treatment 8175069 – Wt. 4.2 lbs. . . . . . . . . . . . . . . . . . . .

2999

14-1/2" TWEAKER

• Comfort grip handles • Sizes: 8", 12", 18", and 24" 8004720 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . .

1799

3 PC DOMINATOR PRY BAR SET • Jaw opening: 1-5/8 • Dipped handle grip to prevent slipping • Tweaks, strips, wedges, pulls nails and many other uses • Powerful wrecking bar 8113904 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . .

2499

12" NAIL PULLER

• Includes: 7", 12" and 18" pry bars • Ergonomically designed handle for a more secure and comfortable grip • Patented capped handle end allows user to strike handle with hammer 8000565 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . .

PRY BARS/HACKSAWS

ADJUSTABLE PRY BAR

5999

Black plastic handle. 8001191 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

CARPENTER PINCERS 99

18" NAIL PULLER

• Drop forged • Carbon steel • Induction hardened tips • For pulling or cutting off nails 8167645 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . .

499

10" MINI NAIL PULLER/PRY BAR • Slide hammer ideal for removing sunken nails • Additional length provides excellent leverage 99 8005942 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 8155293 – Wt. 4.7 lbs. . . . . . . . . . . . . . . . . . . . .

799

SAWS C

HACKSAWS B

F E G A) 9-1/2" MINI HACKSAW Uses 6" blade. ¢ 2910018 – Wt.. 0.2 lbs. . . . . . . . . . . . . . . . . . . . B) 6" MINI HACKSAW 99 8162026 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . 3 REPLACEMENT 6" MINI HACKSAW BLADES 2922375 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 99¢ C) ADJUSTABLE HACKSAW 10" or 12" blade fits vertical or horizontal. 99 2910017 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . D) HIGH TENSION HACKSAW • Uses standard 12" blade • Can cut at 45° or 90° • Extra blades can be stored in handle • Can be used as a versatile compass saw with blade inserted in front end of saw tube 99 2910701 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . .

99 1 6

E) 12" DUAL CUTTING HACKSAW • Cast metal body with rubber hand grips • Cuts downward or at 45° angle • Blade: 24 teeth per inch (included) 99 8088791 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . F) 12" MULTI-CUTTING HACKSAW • Steel frame hacksaw with rubber grip handle • Reversible low profile handle allows access in difficult to reach areas • Strong carbon steel blade can be adjusted to cut downward, right or left 99 8003735 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . G) 12" HACKSAW • Blade adjusts to various angles • 12", 24 TRI high carbon blade 99 8103517 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . .

13 14

295

HACKSAWS/FILES

12" COMBINATION BOW & HACKSAW

HACKSAW BLADES A B Ideal for wood, plastic, and machinable metal including conduit, stainless steel tubing, angle iron, copper tubing, structural materials, etc. A) HIGH SPEED STEEL BLADES Length Teeth/In. Wt. (lbs.) ITEM PRICE 10" 32 0.1 2922789 1.19 12" 18 0.1 2922797 1.19 12" 24 0.1 2922805 1.19 12" 32 0.1 2922813 1.19 B) COBALT BLADES Flexible, shatterproof, longer life, and faster cutting. Length Teeth/In. Wt. (lbs.) ITEM PRICE 12" 18 0.1 8002861 1.99 12" 24 0.1 8002872 1.99 12" 32 0.1 8002875 1.99

12" GRIT EDGE ROD SAW BLADE

• 2 blades • Bow saw ideal for cutting wood • Hacksaw ideal for cutting plastic and metal 99 8000780 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 3 PK REPLACEMENT BOW SAW BLADES 8047259 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 1.99

21" BOW SAW

• Tubular steel frame • Frame includes adjustable cushion grip 99 8003844 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . 2 PK REPLACEMENT BOW SAW BLADES 8034951 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 3.99

CHAIN HAND SAW

• Tough alloy steel rod is coated with tungsten • Lightweight, portable carbide grit particles chain saw with 20" cutting length • Cuts "unsawable" materials like fibreglass, • Teeth set for fast wood cuts cast iron, masonry, concrete, hardened tool steel, and ceramic tile 49 • Includes carrying pouch with belt loop 8178451 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . 2940450 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

FILES CHAIN SAW FILES FILE SETS Wt. 0.1 lbs.

Size 1/8" x 6" 3/16" x 8" 5/32" x 8" 13/64" x 8" 7/32" x 8" 1/4" x 8"

D C C) 5 PC SET Includes: 2 round, 2 square, and 1 flat steel file with wooden handles. 2910040 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . D) 4 PC 8" SET Includes: 1/2" round, rasp, mill, and round files. 2924918 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

10" FLAT WOOD RASP

296

Single cut on both sides and provides rapid stock removal. 8202541 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

Pitch 1/4" 0.325" 0.370" 3/8" 7/16" 1/2"

ITEM 8111916 8111924 8111932 8111957 8111965 8111981

PRICE

279

7 PC MACHINIST FILE SET

999 • Includes: 3 flat, 1 half round, 99 1 round, and 2 taper files • Rubber grip handles 8004723 – Wt. 3.9 lbs. . . . . . . . . . . . . . . . . . . . .

1899

FILE SET

• For small openings, notches, and square holes • 2 pc slim taper files 99 8047318 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

BASTARD FILES

A B

E F

FILES

D Wt. (lbs.) ITEM PRICE A 4" Slim Tapered Single 0.1 8148454 1.99 B 6" Tapered Single 0.1 8148447 2.99 C 10" Smooth Double 0.3 8148439 4.99 D 10" Second-Cut Double 0.5 8148413 5.99 Type

Cut

3 PC FILE SET

• Double cut on both sides • Provides rapid stock removal Type Wt. (lbs.) 10" Flat 0.5 E* 12" Round 0.5 F 1.5 G 14" Half-Round * single cut

ITEM PRICE 8084295 6.99 8084311 6.99 8084337 12.99

12" FLAT BASTARD FILE

• Includes: 10" flat, triangular, and half round • Used by machinists, steel files machine, ship, and engine builders • Rubber grip handles 99 • Double-cut on both sides, single cut on 8003169 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . each edge 2920925 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

FILES

BASTARD FILES

H I H) 5-1/4" TUNGSTEN POINT FILE • Designed for dressing distributor points • Double-cut 2910300 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . I) 8" AXE SHARPENING FILE • Ideal for sharpening axes and garden tools • Rectangular shape • One side is double-cut, the other single-cut 2910298 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

ROUND BASTARD FILE • Single cut • File circular openings on concave surfaces Length Wt. (lbs.) ITEM PRICE 8" 0.2 2920920 6.49 99 12" 0.6 2920927 11.99

MILL BASTARD FILES • Single cut on sides and edges • Used for sharpening mill or circular saws, drawer filing, or finishing metals Size Wt. (lbs.) ITEM PRICE 6" 0.1 2920906 4.99 8" 0.3 2920907 5.99 10" 0.5 2920909 7.99 99 12" 0.8 2920926 11.49 99

10" ALUMINUM FILE • Double cut • Designed for use on aluminum alloys 8148421 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

1399

5 PC TITANIUM COATED DIAMOND FILE SET

NEEDLE FILE SETS K

• 300 grit • 7" long • Includes: round, half round, flat, square, and triangle files 8049009 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

1299

DIAMOND FILE/HONE COMBO J) 5 PC 7-1/4" NEEDLE FILE SET Includes: round, square, triangle, half-round, and flat files with 3/16" dia. vinyl grips plus vinyl pouch. 2921831 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . K) 10 PC 5-1/2" NEEDLE FILE SET (SHOWN) 1/8" dia. with vinyl grips. 2921823 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . L) 10 PC 5-1/4" RIFFLER NEEDLE FILE SET Includes a variety of round, flat, square, and triangle curved files. 2925394 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

• File: 500 grit • Hone: 400 grit 8142846 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . .

999

349 FILE BRUSH • Wire brush: 1-1/2" x 6" • O’all length: 9-1/4" 99 • For cleaning debris out of files 8142978 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

297

FILE ACCESSORIES, SHARPENERS & MAGNIFIERS

SHARPENING STONES A

A) 2 PC COMBINATION STONE SET • Ideal for sharpening knives, hatchets, and small hand tools • Coarse and fine stones • 6" x 2" x 1" and 3" x 1" x 3/8". 2970054 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) COMBINATION DIAMOND GRIT STONE • Hone size: 4" x 3/4" • Dual hone: 300 grit and 400 grit • With foldable plastic handle 8006968 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 3 PC DIAMOND HONE SET • 180 grit (blue), 260 grit (red), 360 grit (yellow) • Ideal for sharpening high speed and carbide steel • 3 layers of diamond are nickel bonded to an alloy steel frame 8025399 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

1299

1499

3 PC SHARPENING STONE SET

• 120, 280, and 600 grit stones • Nylon storage pouch • Sharpen knives, tools, saw blades • For use with water or cutting oil 8112435 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

4 SIDED DIAMOND HONE • Four grits in one: 600 (fine), 400 (medium), 300 (coarse), 200 (extra coarse) • 3 layers of diamond grit • Colour coded and marked on ends with grit sizes • Non slip rubber base on tool holder 99 8142853 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . .

3 PC DIAMOND GRIT SHARPENERS

PLASTIC FILE HANDLES Wt. 0.1 lbs.

2910026 – SMALL 2910027 – MEDIUM 2910028 – LARGE 2910029 – X-LARGE . . . . . . . . . . . . . . . . . . . .

1999

249/ea.

FILE HANDLE KIT 4 interchangeable handle inserts. 8161960 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

200 grit. 8142861 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

299

DIAMOND SHARPENER

299 Dual face, 300/600 grit. 8142788 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

FILE HANDLE KIT

399

DUAL FACE SHARPENER • Ergonomic shape and rubber coating for better comfort and control • 4 interchangeable handle inserts fit most files 8000697 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

• 320 grit • Diamond plated carbon steel sharpener 49 8112427 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

MAGNIFYING GLASSES with COMPASS

MIRRORS & MAGNIFIERS BRASS MAGNIFYING GLASS with MINI SCREWDRIVER

298

• 3" dia. (76 mm) • 3X magnification • Contains: 1 mini Phillips screwdriver and 2 mini slotted screwdrivers 8025200 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

• Dual power style optical grade magnifying glass • ABS frame with racquet style handle and built-in compass • Separate lenses for each power • Great for the crafter, artist, hobbyist, traveller, etc. 4X and 8X POWER - 75 mm LENS 8029117 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 3X and 6X POWER - 90 mm LENS 8029091 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

299 299

A D B C E

A) 2" DIA. TELESCOPING MIRROR Extends 6" to 33". 99 2970237 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . B) MAGNETIC PICK-UP TOOL with MIRROR • Telescopic shaft extends from 5-1/2" - 20" long • 2-1/2" mirror and 1 lb. magnet 99 8104663 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . C) INSPECTION MIRROR with FLEX SHAFT 21" handle, 2" x 3" mirror. 99 2970229 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

4 5 7

MAGNIFIERS

D) MAGNETIC PICK-UP and MIRROR • Magnet: 5" retracted, 22" extended • 2" mirror: 9" retracted, 17" extended • Both units have multi-angle ball joints 2926749 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . E) TELESCOPIC INSPECTION MIRROR • 3 section telescoping handle extends from 14-1/2" to 32" • 3-1/2" x 2" mirror with ball joint to allow 90° swivel • Great for auto mechanics or home workshops 8159501 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

899

MIRRORS & MAGNIFIERS

MIRRORS

899

F) 4X JEWELLER'S MAGNIFYING EYE GLASS Ideal for jewellers, stamp collectors, hobbyists, and science projects. 99 2970139 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . G) 1-3/8" DIA. FOLDING TRIPLE LENS 3X magnification per lens. 99 2970188 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . H) 2X MAGNIFYING GLASS 3" lens. 99 2970156 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . I) HANDS-FREE 3X MAGNIFIER with LIGHT • 4" dia. magnifying glass in a foldable stand • Requires 4 AA batteries (not included) 99 8160525 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . J) LIGHTED MAGNIFYING GLASS • 5X magnifier • 3.3" lens • Requires 2 “AA” batteries (not included) 99 8001976 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

1 2

I K

2 7 8

J K) MAGNIFYING GLASS with FLEXIBLE SHAFT • 3.5X magnifier • 20" flexible shaft with clamp 99 8001985 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

“THIRD HANDS” L) THIRD HAND with MAGNIFIER • 2 alligator clips and 2X, 2-1/2" magnifying glass • 6 ball joints for holding objects at all angles, leaving hands free to glue, solder, repair, or assemble 49 2970341 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . M) THIRD HAND with 3X MAGNIFYING GLASS • 3" glass magnifier with 3X power • Steel clips and holders for hands free operation • Soldering gun holder • Heavy cast iron base 99 8068793 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

MAGNETIC UTILITY HOOK • 2" steel hook • 3 lb capacity magnet 8105868 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . .

UNIVERSAL MAGNETIC LATCH

• Use as a latch for doors and gates, or as a holding or lifting device 99 • 50 lb. cap. 8079238 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

299

PICK-UP TOOLS & MAGNETS

PICK-UP TOOLS & MAGNETS A) 19" BENDABLE PICK-UP MAGNET • Shaft can be reshaped and will lift up to 0.4 lbs. • Bends around corners or into hard to reach areas 99 2971257 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) MAGNETIC PICK-UP TOOL with 17" FLEX SHAFT 5 lb. cap. 99 2970228 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . C) RELEASING PICK-UP MAGNET • 8" x 3-1/2" dia. magnet • Max. cap.: 16 lbs. (7.2 kg) 99 8048928 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . D) MAGNETIC PICKUP TOOL • 3 lb. magnet • LED light • 4 claw pick up • 18" flex handle 99 8121576 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . E) MAGNETIC PICK-UP TOOL with LED LIGHT • High visibility orange handle • 17" flexible shaft • Requires 3 LR44 mercury batteries (included) 99 8053811 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . F) MAGNETIC PICK-UP TOOL with LIGHT and MIRROR • 5 lb. pick-up tool with light and mirror • Requires 2 “AA” batteries (included) 99 8049553 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . G) LONG HANDLE RELEASING PICK-UP MAGNET • 3-1/2" dia. magnet • 27" long • Max. cap.: 25 lbs. (11.3 kg) 99 8048936 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

MAGNETIC PICK-UP TOOLS

3 6

A C B

8 9

TELESCOPING MAGNETIC PICK-UP TOOL

PICK-UP TOOL with SPRING LOADED FINGERS 24" LONG 8182115 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 36" LONG 2970033 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

199 249

• 50 lb. capacity • 35" handle will reach under vehicles, work benches, etc. 99 8050601 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

2 PC MAGNETIC CLIPS 8164303 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

300

999

MAGNETS • 4 pk. of super magnets • 8 lb. lifting capacity per magnet 99 8056277 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

SCREWDRIVER MAGNETIZER/ DEMAGNETIZER Pass the screwdriver through the centre hole to magnetize, slide through channel to demagnetize. 8124786 – Wt. 0.2 lbs . . . . . . . . . . . . . . . . . . . . . . .

1299

MAGNETIC PICK-UP TOOL

PICK UP MAGNET • Attaches to a standard threaded broom handle to be used as a pick-up tool • 65 lb. capacity 8144669 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Handle extends from 15" to 25" • Locking hinge holds magnet position • Strong rare earth magnetic tip 8046013 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

399

MAGNETIC SHEET • 12" x 12" (30.48 cm x 30.48 cm) • Adhesive backing 89 • 1.5 mm. thick 8155962 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . .

999

HANDLE MAGNETS A

B Lift, suspend, hold, or retrieve metal objects. Lift Cap. Wt. (lbs.) ITEM PRICE Up to 25 lbs. 0.2 8158974 9.99 Up to 50 lbs. 0.4 8158982 11.99 99 Up to 100 lbs. 0.7 8158990 14.99 Up to 150 lbs. 2.0 8159006 24.99

C A) EXTENDS: 6" TO 18-1/2" With mirror. 2970238 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) EXTENDS: 6" TO 24" • 5 lb. capacity ROUND HOLDING • Flexible head and pocket clip 99 2970154 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . MAGNET with KNOB C) TELESCOPIC PICK-UP TOOL with ADAPTERS 5 lb. flex, 5 lb straight, and 3 lb. straight. 99 Lifts up to 25 lbs. 2970263 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 8079246 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

3 4 7

MAGNETS

499 H

PICK-UP TOOLS & MAGNETS

TELESCOPING MAGNETIC PICK-UP TOOLS

M D) MAGNETIC STRIP 1/2" x 30" adhesive backed. 8159014 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 4 PC MAGNETIC FOAM TABS • Adhesive backing • Each measures 1" x 1" x 3/16" 8045940 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . F) 2 PC CERAMIC MAGNETIC RINGS 1-3/4" O.D. x 7/8" I.D. x 1/4" rings. 8183857 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

249 249 229

G) CERAMIC MAGNETIC DISCS Wt. 0.2 lbs.

Dia. Ht. Qty. ITEM PRICE 1" 5/32" 6 8159022 2.49 3/4" 3/16" 8 8159030 2.99 1/2" 3/16" 10 8159048 3.49 H) 2 PC CERAMIC MAGNETS Each measures 3/8" x 7/8" x 1-7/8". 99 8159063 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . I) MAGNET BASE with RING Rare earth magnet base. 49 8183899 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

2 4

MAGNETIC FLOOR SWEEPERS May be used to clear walkways, factory aisles, loading docks, parking lots, etc. N) 14-1/2" MINI MAGNETIC FLOOR SWEEPER • Lightweight 14-1/2" magnet easily picks up small metal objects • 41" handle and small 3" dia. wheels allow use under work benches, vehicles, etc. 99 8000698 – Wt. 3.7 lbs. . . . . . . . . . . . . . . . . . .

O) 24" FLOOR SWEEPER MAGNET WITH RELEASE • Manual release • 27" span with 24" magnet • Very powerful heavy duty magnet 99 8210262 – Wt. 36.1 lbs. . . . . . . . . . . . . . .

129

J) HANDY HOOK MAGNET • Lift cap.: up to 20 lbs. • Ideal for hanging keys, tools, etc. • 2" dia. 99 8159071 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . RARE EARTH MAGNETS Extremely strong and resistant to demagnetization. K) 3 PK 18 mm dia. x 3 mm. 49 8183907 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . L) 10 PK 8 mm x 3 mm. 49 8183915 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . M) PULL MAGNETS • Lift capacity up to 100 lbs. • Ideal for positioning spray nozzles, hoses or wires 99 8183931 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . • Lift cap.: up to 225 lbs. • Ideal for retrieving tools, scrap metal, etc. • Rope or rod can be attached to eyebolt 99 8183949 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . .

4 4 4

12 34

N O

P P) 24" WIDE MAGNETIC FLOOR SWEEPER • Picks up 7.5 lbs. of 8 penny nails from 2" high • 48" handle 99 8040498 – Wt. 27.6 lbs. . . . . . . . . . . . . . . . . .

159

301

HOBBYIST TOOLS

HOBBYIST TOOLS HEMOSTATS A

MINI STEEL PICK

199 199 199 399

699 799 799

MINI DRILL SET

Fibreglass handle. 8218091 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . .

1199

6 PC TWEEZER SET

• 7-1/4" long handheld push drill • Ideal for boring small holes when working on miniatures, models, or jewellery • Fits #80 to 1/16" drill bits (not included) 99 2910186 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Non magnetic stainless steel with anti-static coating • Great for electronics or other static sensitive devices 8161994 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

LEATHER PUNCH with EYELET FASTENER

A) 3-1/2" STRAIGHT • 2 locking settings • Great for electronics projects, crafters, etc. • Straight jaws 8029171 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) SCISSOR STYLE FORCEPS CLAMPS 3 locking positions. 3-1/2" CURVED 8029162 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 4-1/2" CURVED 2970232 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . C) HEMOSTAT CLAMP KIT • 2 locking clamps • Adjustable forcep style 8016327 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . D) CLAMP and CUTTER • 6-1/2" scissor style clamp with 3 locking settings • Built-in cutting blades • Great hobby, craft, and toolbox item • Stainless steel 8029153 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . E) 12" ALL PURPOSE CLAMPS STRAIGHT 8005967 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . CURVED 8005968 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

7 PC ART KNIFE SET Includes handle and 6 assorted 99 blades. 99 8025237 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 5 PC REPLACEMENT BLADES 8025246 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 1.49

SCREEN INSTALLATION TOOL • 2.5, 3, 3.5, 4, and 4.5mm punches • Eyelet punch head for installation of eyelets • Includes 25 of each: chrome, brass, copper, and black coloured eyelets 99 • Natural wood handle 2970003 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . • Zinc plated steel 100 PC REPLACEMENT EYELETS 8222341 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 2970261 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 2.29

METAL STAMP SETS

302

499

9 NUMBER STAMPS - Includes 0 to 8 (6 can be used as 9). Size Wt. (lbs.) ITEM PRICE 1/8" 0.5 3431954 3.99 1/4" 1.3 3430026 4.99 5/16" 1.8 3432275 8.99 27 LETTER STAMPS - Includes A to Z plus “&”. Size Wt. (lbs.) ITEM PRICE 1/8" 2.0 3431947 8.99 1/4" 3.8 3430028 14.99 5/16" 5.3 3430027 26.99

B • Assorted sizes and styles of tweezers • Great for hobbyists and crafters A) 4 PC TWEEZER SET Approx. 4-1/2" long. 8035477 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 5 PC TWEEZER SET 8035468 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Acid brushes • Great for plumbers, electronics, and more • Strong steel handle makes applying pre-solder 99 acid flux easy and clean 99 8037910 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

3 499 PAINT BRUSHES

3 PC PAINT BRUSH SET

• All purpose polyester bristles • 1-1/2", 2" and 3" 8043869 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

DUST REMOVER • Rubber bulb with brass nozzle • Ideal for removing dust from hard to reach spaces 8162042 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

D 99

HOBBYIST & CUTTING TOOLS

12 PC BRUSH SET

STAINLESS STEEL TWEEZERS

C) ECONOMY PAINT BRUSHES 1-1/2" wide. 2944411 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 3" wide. 2944403 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 D) 20 PC ARTIST BRUSH ASSORTMENT 2970032 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

99¢ 149 249

CUTTING TOOLS UTILITY KNIVES E) SLIM UTILITY KNIFE Includes 10 blades. 8007346 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . F) UTILITY KNIFE • Auto-lock • Comfortable and stable grip 8082927 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . G) SELF-LOADING UTILITY KNIFE Includes 3 blades. 8007402 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . H) AUTO-LOAD UTILITY KNIFE • Soft rubber grip and auto-lock • Blade cartridge holds 6 blades 8082935 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . I) FOLDING/LOCKING UTILITY KNIFE Includes 5 blades. 8037293 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

Includes one 7" and one 9" pair. 8143018 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

299

399 J

499

J) ERGONOMIC RETRACTABLE UTILITY KNIFE • Aluminum alloy with comfort grip 99 • Includes 6 SK5 blades 99 8200784 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

10 PK REPLACEMENT BLADES Fits 8037293. 8007337 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 2.49

2 PC SCISSOR SET

10 PK. REPLACEMENT BLADES Fits 8082927, 8007402, and 8082935. 8007300 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 2.49

MAGIC CUTTER • Functions as fish scaler, can/bottle opener, cable cutter, screwdriver, screw-top bottle and jar opener • Stainless steel blade cuts paper, cloth, metal, and many other items 79 2970009 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . .

1199

303

CUTTING, SCRAPING & CLEANING TOOLS

SELF LOADING UTILITY KNIVES B A

KNIVES

• Automatically reloads next blade • Ergonomic design • Soft touch rubber grip A) SMALL Cartridge holds 5 blades. 8002884 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . B) LARGE Cartridge holds 6 blades. 8002887 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

699 E

C) SLIM UTILITY KNIFE 2970094 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . D) LARGE CUTTER with DIAL LOCK 2970095 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . E) AUTO LOCK CUTTER Auto lock knife with heavy duty cutter. 8139180 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

F) HEAVY DUTY CUTTER • Comfortable handle with non-slip rubber grip • Features accurate control, effective cutting 99 99 2970096 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . G) EXTRA HEAVY-DUTY CUTTER 79 Cushioned grip. 49 2970202 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . 29

3 7

10 PC REPLACEMENT BLADES Fits 2970094. 2970091 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 4.99 10 PC REPLACEMENT BLADES Fits 2970095 and 8139180. 2970090 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 5.69

50 PC REPLACEMENT BLADES Fits 2970095 and 8139180. 2970115 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . 19.99 5 PC REPLACEMENT BLADES Fits 2970096 and 2970202. 2970092 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . 5.99

SCRAPING TOOLS

SCRAPING & CLEANING TOOLS 2 PC O-RING & SCRIBE SET

Steel tips. 8105876 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

4" SCRIBER • Magnetic tip • Pocket clip 8161978 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

2-IN-1 TELESCOPING PICK-UP / SCRIBER

304

I 99

H) STRAIGHT BLADE GASKET SCRAPER 1" wide x 11" long. 2990122 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . I) 5 PC SCRAPER and REMOVER SET 99 8-1/4" and 11" multi-purpose scraper, 8" scratch awl, 9" cotter pin puller, plus radiator hose remover. 2926673 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

449

999

MULTI-PURPOSE ENGRAVER with DIAMOND TIP

• Extends from 6" to 26" • With pocket clip and scribe tip with cap • Great for picking up metal in hard to reach • Requires 2 “AAA” batteries (not included) places 99 • Freespeed: 11,000 to 12,000 RPM 99 8163974 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 8021053 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

2" SCRAPER

249

8131229 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

8121659 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

299

5" STAINLESS STEEL SCRAPER

9" ALL PURPOSE AWL • Black plastic handle, chrome vanadium steel tip • 5" blade 2910159 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

• Resists corrosion • Soft grip handle 8121642 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

399

499

PAINT SCRAPER

DENTAL TOOLS B • High carbon tempered steel blade • Reversible blade for fine or rough surfaces 8068710 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

499

SCRAPING & CLEANING TOOLS

1-1/8" STAINLESS STEEL SCRAPER

4 PC PICK & HOOK SET

A) 3 PC KIT Inspection mirror, pick tool, and 6" tweezers. 2970945 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . B) 4 PC 6" PICK SET Double ended stainless steel picks. 2924744 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . C) 6 PC DENTAL PICK SET Assorted stainless steel picks. 8077844 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

599 99

699

SCRAPERS

• Chrome vanadium steel hooks with ergonomic cushion grips • Includes: straight pick, 90° hook, curved hook and offset hook • Use for separating wires, scribing, o-ring removal, adjusting/retrieving small parts 8168577 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

699

4 PC STAINLESS STEEL SCRAPER SET

D E D) ALL METAL SCRAPER with 5 BLADES 99 2970055 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . E) DELUXE WINDOW SCRAPER • Stainless steel head and blade • Includes plastic blade cap 49 8004348 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . 10 PC REPLACEMENT BLADES 2970036 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 1.99

1 5

4 PC PICK & HOOK SET

• Soft cushion grip • Strike plate on butt of handle • Sizes:1-1/2", 2", 4", 6" 8193666 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . .

12 PC SCULPTING TOOL SET

• 8" long double ended tools • Stainless steel • Stainless steel construction • Use for separating wires, scribing, O-ring • For use with clay, removal, adjusting/retrieving small parts 99 wax, and other soft materials 8119802 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . 8111338 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . .

1499

1199

305

TILE TOOLS

TILE CUTTERS

TILE TOOLS

A) 13" CUTTER • Steel base construction, polished rails • 1/2" tungsten carbide cutting wheel • Maximum tile sizes: 13" square, 9" diagonal, 1/2" thick 8158396 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . B) 17" CUTTER • Steel base construction, polished rails • 7/8" tungsten carbide cutting wheel • Maximum tile sizes: 17" square, 12" diagonal, 5/8" thick 8158412 – Wt. 11.0 lbs. . . . . . . . . . . . . . . . . . .

PROFESSIONAL TILE COMPOUND NIPPERS • Twice the power of conventional nippers • Makes irregular cuts on all types of tile and stone • Ergonomic comfort grips 8158446 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

3999

CARBIDE CUTTING WHEELS Replacement 1/2" cutting wheel for 13" tile cutter 8158396. 8192023 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . Replacement 7/8" cutting wheel for 17" tile cutter 8158412. 8192031 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399 399

TILE PLIERS/HAND CUTTER

1499

DELUXE MIXER 8161150 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . .

• Use to score and cut tile up to 1/2" • Tungsten carbide cutting wheel • Fixed cast aluminum breaker bar 8158461 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

TILE NIPPERS

COPING SAW • For cutting curves in tile, stone & marble • Diamond coated rod saw blade for long life • Comfortable ergonomic handle 8158511 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

• Makes irregular cuts on tile or stone • Long lasting tungsten tips 99 • Comfort grips reduce fatigue 8158453 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . .

PROFESSIONAL QUALITY

Size Wt. (lbs.) SQUARE NOTCH 1/4" x 1/4" x 1/4" 0.5 0.5 C 1/4" x 3/8" x 1/4" 1/2" x 1/2" x 1/2" 0.5 V NOTCH 3/16" x 5/32" 0.5 D MARGIN 5" x 2" 0.4 E POINTING 5-1/2" 0.4 F

E F

ITEM

PRICE

8158537 8158545 8158552

1.99 1.99 1.99

8158560

1.99

8158610

2.99

8158628

2.99

GROUT BAG

GROUT SPREADER 8161168 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

999

TROWELS

306

1699

• Silicone lined • Reinforced tip 8158693 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

299

• Extra large brush head • Nylon bristles will not damage tile For applying grout to flat surfaces such as tile, 8158701 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . walls, marble, etc. 99 8158651 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . .

HEAVY DUTY TILE GROUT SAW

149

FLOOR SCRAPERS A B

• Use to repair or replace damaged grout • Long lasting diamond cutting blades • Ergonomic handle 8158487 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . .

For removing old flooring in preparation for laying tile; replaceable professional high carbon steel blade; heavy duty construction. A) 4" Handle extends to 24". BACKERBOARD SCORING KNIFE 99 8158685 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . B) 7" Handle extends to 44". 99 8158677 – Wt. 6.6 lbs. . . . . . . . . . . . . . . . . . . . REPLACEMENT BLADES 5 pc blades for 4" scraper 8158685. • Scores all types of cement based backerboards 99 8189656 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . • Reversible blade creates additional cutting tip • Durable carbide tips for long life 99 Blade for 7" scraper 8158677. 99 8158495 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . 8194086 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

TILE TOOLS & TOOL CARTS

TILE & GROUT BRUSH

GROUT FLOAT

2 3

TOOL CARTS

D C) ADJUSTABLE HIGH RISE TOOL TRAY • Height: 35" min., 48" max. • 24" x 17" tool tray with non-slip mat • Roll tools, parts, and small diagnostic equipment directly beside the engine compartment 99 8008489 – Wt. 35.2 lbs. .

E) 3-TIER SERVICE CART • 200 lb. capacity D) 3 TIER SERVICE CART • 3 shelves: 23.5" x 16" x 2.5" • 220 lb. capacity • One drawer with ball bearing: • Three 3-3/4" deep trays with 19" x 14" x 2.5" non-slip rubber matting • Two 3" swivel casters and • 4" casters with brakes two 3" rigid casters • O’all dim.: • O’all dim.: 29"L x 16"W x 34"H 99 32"L x 31.5"H x 18"W 99 8095960 – Wt. 34.9 lbs. 8158925 – Wt. 46.3 lbs.

129

Ro yal Ser vice Pr omise ..... No sale is final until you're satisfied. If you are unhappy with any purchase, simply return it and we will repair, replace or refund your purchase.

307

TOOL BAGS & STORAGE

TOOL BAGS A A) PARACHUTE BAG • 6 interior pockets • Drawstring 99 8193674 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 12" NYLON TOOL BAG • 6 padded side pockets and zipper closure • 12" x 8" x 7" deep 99 8044341 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . C) 14" TOOL BAG • 24 pockets • 600 denier polyester construction with nylon webbing in handles • Strong base support • 14" x 7" x 8" 99 8202616 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . D) 15" NYLON TOOL BAG • 8 padded side pockets and shoulder carry strap • 15" x 9" x 9" deep 99 8044350 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . . E) HEAVY DUTY NYLON TOOL BAG • Rivet reinforced • 22 pockets and main compartment for larger items • Carrying handle and shoulder strap have metal clasps • Rubber grips on bottom for stability • With metal clip tape measure holder 99 8088619 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . F) 11.5" NYLON TOOL BAG • 14 small outside pockets • 1 large closing outside pocket • 16 small inside pockets • Padded shoulder carrying strap • 11-1/2" x 11" x 13" 99 8128266 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

14 19

E F

TETRON TOOL ROLLS

TOOL STORAGE BUCKET ORGANIZER

• 26 pockets • Fits standard 5 gal. bucket 8074148 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

PARTS TRAYS

11 POCKETS (SHOWN) 13-1/2" x 15" tetron. 8000959 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 22 POCKETS 13-1/2" x 28" tetron. 8000968 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . 99 HEAVY DUTY CANVAS TOOL ROLL 18 pockets, 15" x 20". 8023462 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

299 399 999

G G) PARTS DISHES Keep small metal parts in place. 6" DIA. x 1" DEEP – MAGNETIC 99 8105082 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . 8" DIA. x 2" DEEP – NON-MAGNETIC 99 8001881 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . H) RECTANGULAR MAGNETIC PARTS TRAY 9-3/8" x 5-3/8". 99 8007480 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

5 2

308

• Made of sturdy canvas • Large and small pockets to carry a variety of items • Adjustable neck strap and waist strap with quick connect plastic buckle 99 5040187 – Wt. 0.6 lbs. . . .

• 20 individual containers measure 1-1/4" • O’all dimensions: 6-3/4" x 5-3/4" x 7/8" 8048604 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

399

CUSTOM TOOL HOLDERS A) LEATHER BELT Fits waist sizes 33" to 44". 8075723 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

799

ADD YOUR ACCESSORIES: B) SPLIT LEATHER TOOL HOLDER with METAL SWIVEL for HAMMERS 99 8111445 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . C) METAL CLIP for TAPE MEASURES 99 8111478 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . D) KNIFE HOLDER • Split leather construction • Convenient belt loop for easy access 99 8156549 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . E) POUCH for TAPE MEASURES 99 8111486 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . F) TOOL BELT MAGNET Clips onto tool belt. 99 8111353 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . G) LEATHER TOOL POUCH • Durable suede leather • 4 pockets including nail pouch • 2 side pockets for pencils, screwdrivers, etc. • 2 steel hammer loops • Fits belt 8075723 99 8071995 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . H) 7 POCKET TOOL BELT • Durable suede leather pouches • 2 steel hammer loops • Adjustable nylon belt 99 8078024 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . .

D C

TOOL BELT & ACCESSORIES

20 PC PLASTIC ORGANIZER

16 POCKET TOOL APRON

3 3

3 4

SOCKET DRAWER ORGANIZER

6 DRAWER ROLLER CABINET

• O’all dimensions: 27.1W" x 18"D x 34.8"H 2 Drawers: 23.2"W x 16.1"D x 1.9"H 2 Drawers: 23.2"W x 16.1"D x 4.0"H 2 Drawers: 23.2"W x 16.1"D x 6.0"H • Includes rubber mats and 5" casters 8146854 – Wt. 132.0 lbs. . . . . . . . . . . . . . .

• Organize 124 SAE and Metric sockets • 1/4", 3/8" or 1/2" drive • 19-1/2" x 14" tray fits 22" x 16" drawer 99 • Tray labeled for easy organization 8103897 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . .

329

3999

309

TOOL BOXES

TOOL BOXES A

C B

G D

F H

A) 16" FLAT TOP TOOL BOX O’all dim.: 16"W x 6"D x 6-1/2"H. 3480018 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . A) 21" FLAT TOP TOOL BOX O’all dim.: 21"W x 8-3/4"D x 9"H. 3480038 – Wt. 12.4 lbs. . . . . . . . . . . . . . . . . . B) CIRCULAR SAW/POWER TOOL BOX O’all dim.: 13-1/2"W x 10"D x 10"H. 3480014 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . C) 20" HIP ROOF TOOL BOX O’all dim.: 20"W x 7"D x 8"H. 3480017 – Wt. 7.9 lbs. . . . . . . . . . . . . . . . . . . D) 6 DRAWER MECHANIC'S TOOL CHEST • O’all dim.: 26"W x 12"D x 14-1/2"H • Drawers: one 23"W x 10-1/2"D x 2-1/2"H, two 23"W x 10-1/2"D x 2"H, and three 7"W x 10-1/2"D x 2"H 8093916 – Wt. 51.2 lbs. . . . . . . . . . . . . . . E) 10 DRAWER MECHANIC'S TOOL CHEST • O’all dim.: 26W x 12"D x 18-7/8"H • 6 drawers: 7"W x 10-1/2"D x 2"H • Drawer: 7"W x 10-1/2"D x 6"H • Drawer: 23"W x 10-1/2"D x 2-1/2"H • 2 drawers: 23"W x 10-1/2"D x 2"H 8093924 – Wt. 66.9 lbs. . . . . . . . . . . . . .

1599 3299 2399 2499

169

310

23999

HEAVY DUTY TOOL STORAGE UNITS FEATURES: • Unique electrostatic powder coating • Piano hinge and internal locking mechanism for greater security • 1-piece drawer slides • Double walled construction • Hemmed edges on all sides • Full length drawer pulls • Heavy-duty casters on all roller cabinets F) 7 DRAWER HANG-ON CABINET • O’all dim.: 15"W x 18-3/4"D x 30-1/2"H • 4 drawers: 11"W x 16-3/8"D x 2"H • 2 drawers: 11"W x 16-3/8"D x 4"H • One drawer: 11"W x 16-3/8"D x 6"H 8093932 – Wt. 61.0 lbs. . . . . . . . . . . . . . . G) 5 DRAWER ROLLER CABINET • O’all dim.: 27"W x 18-3/4"D x 42-3/8"H • Drawers: four 23"W x 16"D x 4-1/4"H, and one 23"W x 16"D x 2"H • Bottom storage: 26-3/4"W x 16-3/4"D x 11-1/2"H • Load rating: 575 lbs. • 5" x 2" wheels 8093940 – Wt. 129.0 lbs. . . . . . . . . . . . . . . H) 11 DRAWER ROLLER CABINET • O’all dim.: 41-3/4" x 18-1/4" x 41-5/8" • 1 drawer: 36-1/2" width • 6 drawers: 22-1/8" width • 4 drawers: 12" width • Load rating per drawer: 50 lbs. • Casters: 5" x 2" 8098667 – Wt. 230.0 lbs. . . . . . . . . . . . . .

24999

35999

69999

ANTI-SLIP DRAWER LINER • Prevents tools from shifting and sliding • 3 mm thick • Black foam rubber • 24" x 48" 8058424 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

12-1/2"

899

4 PC PVC DRAWER LINERS

19"

• Removable inner tray • Flip up, see-through lid for storing small items • Sturdy, lightweight design Size Wt. (lbs.) ITEM PRICE 12-1/2" 1.2 8000815 8.99 16" 1.9 8000806 15.99 19" 3.4 8000799 19.99

• Protects tools and prevents slippage • Size: 22" x 16" 8006682 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

1199

MAGNETIC TOOL HOLDERS

TOOL STORAGE & HOLDERS

PLASTIC TOOL BOXES

3/8" MAGNETIC SOCKET HOLDER B

Organizes, holds, and displays tools and other metal items. • Organizes Metric and SAE sockets A) MAGNETIC TOOL HOLDER • Separate socket compartments allow you to • Magnetic rail and individual adjustable holders keep your standard and deep sockets in one • Holds 10 sockets, screwdrivers, convenient holder or wrenches 99 • Powerful magnet holds sockets in tray 8068736 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . • Holds 28 sockets up to 1" or 24 mm 99 B) 13" MAGNETIC TOOL HOLDER 2911022 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . Two 1/4" dia. mounting holes 10" apart. 99 MAGNETIC TOOL RACK WITH HOOKS 8148942 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 24" MAGNETIC TOOL HOLDER Two 1/4" dia. mounting holes 16" apart. 99 8150120 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . .

SCREWDRIVER HOLDER • 6 heavy duty magnets with rubber coating • 18 hooks included 8217770 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . .

TECH TIPS

• Holds 14 screwdrivers • Includes mounting screws 8160087 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

1199

INTERLOCKING PLASTIC STORAGE BOX

Discard any striking or struck tool if tool shows dents, cracks, chips, mushrooming, or excessive wear. And never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping.

• Boxes can be locked together in many formations • See through drawers with removable dividers • O’all dim.: 1-3/4" x 3-1/2" x 6-1/2" 29 3480056 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

311

SOCKET & WRENCH HOLDERS

WRENCH HOLDERS A) METAL WRENCH HOLDER • Holds 13 wrenches • O’all dim.: 7-1/2" x 5" x 1" 99 2919116 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . B) PLASTIC MAGNETIC WRENCH HOLDER • Holds 12 wrenches • O’all dim.: 10" x 6" x 1" 49 8035510 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . C) METAL WRENCH HOLDER • Holds 12 wrenches • With carrying handle • O’all dim.: 9-1/2" x 6" x 1" 99 2926665 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . D) LOW PROFILE WRENCH HOLDERS • Fits 2" deep tool drawers • Wrench sizes are labeled • Tough ABS plastic SAE: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and 15/16". 99 8016808 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . METRIC: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, and 18 mm. 99 8016817 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

SOCKET HOLDERS E

E) 3 PC SOCKET HOLDERS • Holds 1/4", 3/8", and 1/2" drive sockets • Each strip holds 16 sockets (48 total) • Mounts on wall or in tool box • 16-1/2" long with three 7/32" mounting holes 2919611 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . INDIVIDUAL SOCKET HOLDERS F

599

Wt. 0.2 lbs.

2.49 8000377 – 3/8" DR. . . . . . . . . . . . . . . . . . . . . 2.99 8000378 – 1/2" DR. . . . . . . . . . . . . . . . . . . . . 3.49 8000382 – 1/4" DR. . . . . . . . . . . . . . . . . . . . .

F) SOCKET TRAY • 1-1/4", 1-1/2", and 2-3/8" rails attached to metal tray • Rails hold 10 sockets each 99 8058433 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . G) 3 PC SOCKET HOLDERS • Plastic socket holders mount on 17-1/2" metal rail • Each strip holds 14 sockets 99 8163933 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . H) SOCKET TRAY Holds twenty 1/4", thirty 3/8", and thirty 1/2" sockets. 99 8002252 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . .

9 9

SOCKET HOLDERS

312

Holds shallow and deep sockets with size on top of post. 1/4" DRIVE 13 shallow and deep, 1/8" to 5/8". 2990248 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 14 shallow and deep, 4 to 15 mm. 2990249 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

15 15

3/8" DRIVE 12 shallow and deep, 1/4" to 1". 2990229 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . 15 shallow and deep, 6 to 20 mm. 2990230 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . 1/2" DRIVE 99 14 shallow and deep, 3/8" to 1-1/4". 2990231 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . 99 17 shallow and deep, 10 to 27 mm. 2990232 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . .

1599 1599 1899 1899

TECH TIP

ANGLE IRON

10 FT

5 FT

Size 3/4" x 3/4" x 1/8" 1" x 1" x 3/16" 1-1/2" x 1-1/2" x 3/16" 2" x 2" x 3/16" 3/4" x 3/4" x 1/8" 1" x 1" x 3/16" 1-1/2" x 1-1/2" x 3/16" 2" x 2" x 3/16"

Wt. (lbs.) 2.8 5.6 9.0 12.2 5.6 11.2 18.0 24.4

ITEM

PRICE

1430024 1430040 1430081 1430065 1430032 1430057 1430099 1430073

12.49 16.99 21.99 26.99 17.99 27.99 37.99 46.99

SQUARE HOLLOW TUBE

COLD FINISHED (ROLLED) ROUND Size

Wt. (lbs.) ITEM PRICE 1" x 1" x 0.100" 4.6 1480003 22.99 1-1/4" x 1-1/4" x 0.100" 5.9 1480169 27.99 1-1/4" x 1-1/4" x 0.125" 7.0 1480144 30.99 1-1/2" x 1-1/2" x 0.100" 7.3 1480177 31.99 1-1/2" x 1-1/2" x 0.125" 8.6 1480029 36.99 2" x 2" x 0.125" 12.2 1480037 47.99 2" x 2" x 0.188" 17.3 1480185 64.99 2-1/2" x 2-1/2" x 0.215"* 25.4 1490002 89.99 1" x 1" x 0.100" 9.2 1480045 37.99 1-1/4" x 1-1/4" x 0.125" 14.2 1480151 53.99 1-1/2" x 1-1/2" x 0.100" 14.6 1480001 54.99 2" x 2" x 0.188" 34.6 1480002 109.99 *Also fits 2-1/2" tongue trailer hitch couplers 8 FT.

4 FT.

Size (O.D.)

CHANNEL STEEL • Ideal for trailer frames, railings, racks, bumpers, etc. • Use with expanded mesh to make steps, walkways, ramps, etc. • 5 ft. lengths Wt. Size (lbs.) 1/2" x 1" x 1/8" 4.2 1/2" x 1-1/2" x 1/8" 5.3 1" x 2" x 1/8" 8.9 3" x 1" 20.5 3" x 1" x 10 ft. 41.0

Be alert and aware of your total work environment and any possible overhead objects before you start working.

STEEL

PRINCESS AUTO STEEL CENTRE

1/4" x 5 ft. 3/8" x 5 ft. 1/2" x 5 ft. 5/8" x 5 ft. 3/4" x 5 ft. 1" x 5 ft.

Wt. (lbs.) 0.8 1.9 3.3 5.2 7.5 13.3

ITEM

PRICE

1400027 1400043 1400068 1400084 1400100 1400134

7.29 9.99 12.49 17.49 22.99 42.99

COLD FINISHED (ROLLED) FLAT Wt. (lbs.) ITEM PRICE 1/8" x 1" x 5 ft. 2.1 1420009 16.49 3/16" x 1-1/2" 4.7 1420025 32.99 x 5 ft. Size

STEEL SHEETS

ITEM

PRICE

1430107 1430123 1430149 1430164 1430172

14.99 18.49 28.99 41.99 74.99

RECTANGULAR HOLLOW TUBE

2" x 1" x 0.100". 4 FT 1480086 – Wt. 7.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . 8 FT 1480110 – Wt. 14.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

1 TON LIFTING CLAMP • For lifting sheet steel • 3/4" gap opening 2910217 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . .

• 22 gauge • 24" x 48" sheet COLD-FINISHED ROLLED SHEETS For making boxes, trays, cabinets, and panel construction. 99 1440080 – Wt. 9.2 lbs. . . . . . . . . . . . SATIN-COATED SHEETS Ideal for body repairs and other rust resistant applications. 99 1440098 – Wt. 10.8 lbs. . . . . . . . . . .

28 37

3199 5499

2 TON LIFTING CLAMP

• For lifting sheet steel • 1" gap opening 2910218 – Wt. 15.0 lbs. . . . . . . . . . . . . . . . . . .

7999

313

ALUMINUM/MARKERS

FLAT BAR

8 FT EXTRUDED ALUMINUM

Size

• Lightweight, maintenance free aluminum pieces • Ideal to use where corrosion is a problem • Clear satin anodized finish • 6063P series alloy

1/2" x 1/8" 3/4" x 1/8" 1" x 1/8" 1-1/2" x 1/8"

ANGLE

Wt. (lbs.) 0.6 0.9 1.2 1.7

ITEM

PRICE

1450253 1450105 1450113 1450121

10.99 14.99 15.99 21.99

CHANNEL

Size Wt. (lbs.) ITEM PRICE 3/4" x 3/4" x 1/16" 0.8 1450287 13.99 3/4" x 3/4" x 3/32" 1.2 1450170 16.99 1" x 1" x 1/8" 2.1 1450188 21.99 1-1/2" x 1-1/2" x 1/8" 3.4 1450196 30.99 2" x 2" x 1/8" 4.5 1450204 39.99

Wt. (lbs.) 3/4"H x 3/4"W x 1/16" 1.3 3/4"H x 1"w x 3/32" 2.0 3/4"H x 1-1/2"W x 1/8" 4.1 Size

ITEM

PRICE

1450246 1450089 1450097

17.99 19.99 31.99

ROUND ROD Size: 1/2" dia. 1450220 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . .

SQUARE TUBING

1599

ROUND TUBING

Wt. (lbs.) 3/4" x 3/4" x 1/16" 1.6 1" x 1" x 3/32" 3.2 1-1/2" x 1-1/2" x 3/32" 4.9 Size

ITEM PRICE 1450139 21.99 1450147 28.99 1450154 39.99

Size 3/4" x 1/16" 1" x 3/32" 1-1/4" x 3/32"

Wt. (lbs.) 1.3 2.5 3.2

ITEM

PRICE

1450055 1450063 1450071

17.99 21.99 26.99

METAL MARKERS

A) 2 PACK PRO-EX™ LUMBER CRAYONS • Marks metal, wet or dry wood, concrete, stone, paper, cardboard, and rubber • No drying time required Wt. 0.2 lbs.

8119406 – YELLOW 8119414 – RED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 2 PACK B PAINTSTIK™ • Marks metal, wood, plastic, glass, concrete, paper, rubber, and fabrics • Also marks through water and oil Wt. 0.1 lbs.

314

8119448 – WHITE 8119455 – YELLOW . . . . . . . . . . . . . . . . . . . . . . . . C) QUIK STIK® PAINT STICK • Dries in 5-7 minutes • Works on all surfaces and will not “run” • Twist knob advances stick as needed • Temp. range; -17°C to 60°C (0°F to 140°F) Wt. 0.1 lbs. 6410033 – WHITE 6410034 – YELLOW . . . . . . . . . . . . . . . . . . . . . . . .

D) SILVER STREAK® METAL MARKER • Easy push button advance • Good resistance to torch flames 99 • No sharpening necessary 99 0140242 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . PKG OF 6 SILVER STREAK® REFILLS 0140243 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . 6.99/pkg. E) RETRACTABLE GREASE PENCIL • TRADESMARKER™ includes 5 colour refills (black, red, white, yellow, orange) 39 • Will mark on plastic, glass, metal, wood, cardboard, and paper 99 8119430 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . F) SOAPSTONE • Ideal for marking metal • Includes 5 soapstone refills 99 8119497 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . 99 144 REPLACEMENT SOAPSTONES 99 /pkg. 0140848 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . .

7 2

Wt. 0.1 lbs.

6410016 – WHITE 6410017 – YELLOW 6410018 – RED 6410019 – BLACK . . . . B) PROLINE FINE PAINT MARKERS • Marks metal, wood, plastic, glass, paper, rubber, and fabric • 2 mm bullet tip

B C C) PRO-WASH REMOVABLE PAINT MARKERS D • Real paint that washes off with mild detergent 49 89 • 3 mm (1/8") bullet tip,valve action design 8176174 – WHITE 8176182 – YELLOW . . . D) BALL VALVE PAINT MARKER • Marks wet, oily, smooth, and rough surfaces • Unbreakable 59 ml plastic bottle with 3 mm (1/8") " steel roller ball tip

Wt. 0.2 lbs.

Wt. 0.1 lbs.

8119364 – WHITE 8119372 – YELLOW

8119380 – RED 8119398 – BLACK .

8119463 – WHITE 8119471 – YELLOW . . . . . . . . . . . . . . . . . . . . . . . .

579

DECA IS A EUROPEAN MANUFACTURER WITH OVER 30 YEARS OF EXPERTISE IN THE WELDING INDUSTRY.

WIRE FEED/MIG WELDERS

ALL DECA WELDERS CARRY A 2 YEAR WARRANTY, WITH A 5 YEAR WARRANTY ON THE TRANSFORMER.

FEATURES: • Cold wire trigger and variable wire speed • Automatic thermal shutdown protection • Externally mounted torch and ground clamp output jacks for quick and easy switch from flux core wire to gas welding

MIG WELDERS & ACCESSORIES

PAINT MARKERS A) PAINT MARKERS A • Contains 10 ml of quick drying, opaque liquid paint • 3mm (1/8") valve action bullet tip • Works on metal, wood, glass, plastic, rubber, and cardboard • Paint drys in 3-5minutes and is weather, water and UV resistant • Temp. range: -46°C to 66°C (-50°F to 150°F)

G F

E) DECASTAR 135E • 120V, 20A input • 85A @ 20% duty cycle • 4 heat settings

F) DECASTAR 150E • 120V, 20A input • 105A @ 20% duty cycle • 4 heat settings

Wt. 46.1 lbs.

Wt. 68.3 lbs.

0110098 . . . . . . . . .

39999

0110099 . . . . . . . . . .

49999

G) DECASTAR 180E • 230V, 16A input • 130A @ 20% duty cycle • 6 heat settings • Requires male 250V 50A plug 0141218 8005561 – Wt. 73.0 lbs. . . .

59999

DECA WELDER REPLACEMENT PARTS

J H) PKG OF 2 GAS SHIELDING NOZZLES Fits all our Deca welder models. 8220485 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . I) REPLACEMENT 25 MM CABLE MALEJACK Fits all our Deca welder models. 8222697 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

999 499

J) REPLACEMENT 25 MM CABLE FEMALE JACK 99 8222721 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

K) REPLACEMENT LINER FOR MILD STEEL & FLUX CORE WIRE 8221970 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . .

1299

REPLACEMENT WIRE ROLLERS L) FOR MILD STEEL & FLUX CORE WIRE • Wire size: 0.023" • Fits Decastar 130AC, 135E, 150E, and 180E 8001761 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . M) FOR MILD STEEL, FLUX CORE & ALUMINUM WIRE • Wire size: 0.030" / 0.035" • Fits Decastar 135E, 150E, 180E, and Decamig 100E 8001770 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . N) FOR MILD STEEL & FLUX CORE WIRE • Wire size: 0.035" / 0.045" • Fits all our Decastar models 8001743 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

599 599

315

MIG WELDERS & ACCESSORIES

WIRE FEED/MIG WELDERS

LINCOLN EASYMIG 140 • 120V, 20A input • Output Amperage: 30-140 Amps DC • Duty cycle: 20% @ 90A • Wire options: 0.024" to 0.035" • Weld capacity: up to 5/16" 8193724 – 72.5 lbs. . . . . . . . . . . . . . . . . . . . . .

59999

LINCOLN EASYMIG 180 • 240V, 20A input • Output Amperage: 30-180 Amps DC • Duty cycle: 30% @ 130A • Wire options: 0.024" to 0.045" • Weld capacity: up to 1/2" 8193740 – 80.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

74999

MAGNUM 100SG SPOOL GUN KIT • For 1 lb. spools of 0.030" or 0.035" diameter aluminum wire • Includes gun, adapter, 3 contact tips, gas nozzle, and 1 lb. spool of 4043 - 0.035" wire • Packaged in a convenient portable plastic carrying case • Can be used with the Easy Mig 125, 140, and 180 welders 99 8201261 – 10.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

A) GAS DIFFUSER/TIP HOLDER • Gas diffuser for Magnum 100L gun assembly • Fits WELD PAK and EASYMIG series 8174708 – 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) GAS SHEILDING NOZZLE • Gas nozzle for Magnum 100L gun assembly • Fits WELD PAK and EASYMIG series 8172512 – 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599 999

C) FLUX-CORE WIRE NOZZLE 0142604 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399 D) 10-11 LB. WIRE SPOOL ADAPTER 99 0142711 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 GAS REGULATOR & FLOW METER

F) ARGON/CO2 FLOWMETER KIT • Flowmeter provides more accurate flow information than regulators • Controls flow up to 60 SCFH • Inlet: CGA580 outlet: 5/8"-18RH • Max. pressure: 4,000 PSI G • 6 ft. hose with 5/8"-18RH male ends 99 8082497 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . E) ARGON/CO2 REGULATOR • CGA580 inlet tank connection G) ARGON/CO2 ADAPTER • 1/4" MNPT outlet, includes 1/4" hose barb • Allows argon gas regulator (CGA580 adapter connection) to be used on standard CO2 tank • Designed to control pressure of 0 to 30 CFH (CGA320 connection) (0 to 15 L/min.) of argon or argon/CO2 mixed gas • Fits Powerfist regulator 8082471 and • Max. 3,000 PSI flowmeter 8082497 99 99 8082471 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . 8095325 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . E

WELDING CONTACT TIPS H

H) 6 PER PACKAGE Wt. 1.0 lbs.

8221947 – Size 0.023" 8221954 – Size 0.030" 8221962 – Size 0.035" . . . . . . . . . . . . . . . . . . . I) 10 PER PACKAGE

699/pkg.

Wt. 0.2 lbs.

0142554 – 0.023" to 0.025" 0142562 – 0.030" 0142570 – 0.035" . . . . . . . . . . . . . . . . . . . . . 25 PER PACKAGE

1199/pkg.

Wt. 0.3 lbs.

316

These tips fit most brands of welding guns including Century/Solar, Lincoln, and Deca.

8015300 – Size 0.030" 8012125 – Size 0.035" . . . . . . . . . . . . . . . .

1899/pkg.

11 LB. ROLL

2 LB. ROLL

A) MILD STEEL • Requires shielding gas • CWB cert #: ER49 S-6 • AWS cert #: ER70S-6 Size 0.024" 0.030" 0.035" 0.024" 0.030" 0.035"

Wt. (lbs.) 2.2 2.2 2.2 11.7 11.9 11.8

10 LB. 2 LB. ROLL ROLL

B) FLUX-CORE MILD STEEL • Gasless • CWB cert #: E491T-GS • AWS cert #: E71T-GS Size Wt. (lbs.) 0.030" 2.3 0.035" 2.5 0.030" 11.3 0.035" 11.3

A B

ITEM PRICE 8132284 8.49 8132292 7.49 8132300 6.99 8132250 29.99 8132268 26.99 8132276 24.99

ITEM PRICE 8132334 19.49 8132342 17.49 8132318 69.99 8132326 59.99

C) ALUMINUM (5356) Requires shielding gas. Size x Wt. Wt. (lbs.) ITEM 0.035" x 1.0 lbs. 1.1 0142422

PRICE 8.79

D) STAINLESS STEEL (308L) Requires shielding gas. Size x Wt. Wt. (lbs.) ITEM 0.030" x 2.0 lbs. 2.2 0142430 0.035" x 2.0 lbs. 2.2 0142448

PRICE 39.99 37.99

WELDING CART • Holds small to medium size ARC or MIG welders and single gas cylinders • Top platform measures 17-1/2" x 11" • Hangers for holding MIG gun, ground clamp and accessories • O’all dim.: 28" x 17" x 26-1/2" 8069213 – Wt. 33.0 lbs. . . . . . . . . . . . . . . . . . . . . .

WELD SHIELD WIRE LUBE PADS

WELDERS MULTI-USE TOOL • Use to clean spatter from nozzles, remove and install tips, or cut wire • O’all length: 8" 8088593 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

MIG PLIER HOLSTER • Nylon storage pouch for welders tool strikers or martking tools • With riveted belt strap 8162844 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

NOZZLE SPRAY & DIP

NOZZLE DIP • Prevents spatter build up on nozzles and MIG tips • 16 oz. (454 g.) 0140172 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

MIG WELDING ACCESSORIES

WELDING WIRE

• Designed for use on all MIG wire feeders to remove dust and dirt from the wire prior to wire entry into the liner. 99 • Use of wire feed pads can decrease the friction in the liner by as much as 60%. This will reduce erratic wire feeding and burn backs 8162877 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

999

MIG TORCH STAND WITH MAGNETIC BASE • For holding MIG welding torches • Powerful 4" diameter magnetic base • Exposes all of torch to air and helps gun cool faster • Makes it easier to locate the gun while working • Protect your gun from drops and damage to the nozzle, tip, or trigger • Can be used for most Hobby and Pro type MIG welding torches 99 99 8162851 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . .

999

NOZZLE SPRAY ANTI-SPATTER NOZZLE SHIELD • For welding nozzles, contact tips, and electrode holders • Acts as a plating agent on sprayed surface • Brush or wipe residual spatter away • Requires no cleaning prior to spraying 29 • 16 oz. (454 g.) 0142497 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

599

317

ARC WELDERS

WELDER PLUG & RECEPTACLE A) SURFACE MOUNT RECEPTACLE • 2-pole 3-wire for surface mounting • Will accept up to #4 Gauge wire • 250V, 50A rating • NEMA 6-50 receptacle 0141200 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) MALE PLUG • Heavy duty angled vinyl plastic cord end • Suitable for both 30A or 50A 250V applications • Will accept up to #4 Gauge wire • Convertable to NEMA 6-30 or 6-50 applications 0141218 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A B

1199

1499

WELDING EXTENSION CORDS • 8/3 gauge STW cord • NEMA 6-50 ends • 250V, 50A rating • Lighted ends 8186777 – 25 FT Wt. 11.5lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8186769 – 50 FT Wt. 22.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

9999 17999

ARC WELDERS D

D) AC225 STICK WELDER • 240V, 50A input • 40-225 amp output C) DECA PARVA ARC WELDER • AC welding current only • 120V, 20A input • 70 amp @ 15% duty cycle, AC welding current • 20% duty cycle @ 225A • Fan cooled for extra thermal protection • Automatic thermal shutdown protection • Comes with attached 6 ft. cable and • Uses 1/16" and 5/64" rods NEMA 6-50 plug • Variable heat settings 99 8148660 – Wt. 109.0 lbs. . . . . . . . . . . . . . . 0110094 – Wt. 30.1 lbs. . . . . . . . . . . . . . . . .

35999

139

MIG WELDING TECH TIP BACKHAND

Torch position affects the quality and appearance of the welding bead • Backhand Welding – The wire is kept in the molten pool • Forehand Welding – The wire is pushed out of the molten pool FOREHAND

For thickness of less than 1.5 mm (1/16") backhand welding is recommended with the torch at a greater angle.

318

Penetration Bead Width Stock Risk of Porosity Risk of Sticking Risk of Spatter

Backhand Increased Narrow High Decreased Increased Decreased

Shop online: www.princessauto.com

Forehand Decreased Wide Low Increased Decreased Increased

5 LB PACKAGE • All position • Top quality rods manufactured for PRINCESS AUTO Designation AWS CWB E6011 E4311 E6013 E4313 E7018 E4918 E6011 E4311 E6013 E4313 E7014 E4914 E7018 E4918

Rod Size

Polarity

3/32" x 14" 3/32" x 14" 3/32" x 14" 1/8" x 14" 1/8" x 14" 1/8" x 14" 1/8" x 14"

AC/DC +/AC/DC +/AC/DC + AC/DC +/AC/DC +/AC/DC +/AC/DC +

Current Range (in Amps) 50 to 75 55 to 95 55 to 85 70 to 110 80 to 130 95 to 140 90 to 140

Wt. (lbs.) ITEM 5.0 5.0 5.0 5.0 5.0 5.0 5.0

8207094 8207078 8207086 8207102 8207110 8207128 8207060

PRICE 11.99 11.99 11.99 9.99 9.99 9.99 9.99

ELECTRODES

WELDING ELECTRODES

WELDING ELECTRODES RECOMMENDED USAGE: 309/309L • Joins stainless steel to carbon and low alloy steels ALUMW • Aluminweld is an extruded electrode for both metallic arc and carbon arc welding aluminum plate FERROWELD• A low cost steel electrode for repairing cast iron. It is recommended for repairing pits and small cracks in castings E6011FW • E6011 FW35+ rod can be used to cut, gouge and chamfer any metal when set at high amperage WRD/BU • Wearshield BU is used for carbon and low alloy steels

range (amps) Designation Rod Size Polarity Current AC DC AWS CWB 309/309L E4311 3/32" x 12" AC/DC+ 40 to 70 40 to 70 85 to 135 ALUMW E4314 1/8" x 14" DC+ n/a FERROWELD E4918 1/8" x 14" AC/DC+ 80 to 120 80 to 120 E6011/FW E4918 1/8" x 14" AC/DC+/- 75 to 120 70 to 110 WRD/BU E4914 5/32" x 14" AC/DC+ 155 to 225 145 to 210

Wt. (lbs.) 1.1 0.6 1.1 1.2 1.2

ITEM PRICE Size = mm 8146631 14.99 1/16" = 1.6 8146722 12.99 5/64" = 2.0 3/32" = 2.4 8146698 6.99 1/8" = 3.2 8146607 5.99 5/32" = 4.0 8146672 6.99

WELDING ELECTRODES Current Range (in Amps) AC DC 45 to 75 #6013 5/64" x 12" AC/DC+/50 to 80 20 to 45 20 to 40 #6013 1/16" x 10" AC/DC+/Type

Rod Size

Polarity

Wt. (lbs.)

ITEM

PRICE

1.1 1.1

8011652 8011643

5.99 10.99

WELDING ELECTRODES (ALL POSITION) RECOMMENDED USAGE: E6011 • Ideal for thin steel sheets and pipes • Great for poor groove fit, up and vertical downward welding E6013 • Ideal for machinery, vehicles, light structural steels, surface dressing of heavy steel structures. Low fume. E7014 • Ideal for mild steel fabrications particularly in horizontal fillet welding of sheet metal and ornamental iron work E7018 • Ideal for high tensile steel bridges, buildings, machines, etc. • Low hydrogen type electrodes

• Designed for welding low alloy and mild steel • 3/32"-4 kg • 1/8"-5 kg. Designation Rod Size Polarity Current Range (in Amps) Wt. (lbs.) AC DC AWS CWB E6011 E4311 3/32" x 12" AC/DC +/- 50 to 85 40 to 75 9.1 E6013 E4313 3/32" x 12" AC/DC +/- 75 to 105 70 to 95 9.1 E7014 E4914 3/32" x 12" AC/DC - 80 to 100 75 to 95 8.9 E7018 E4918 3/32" x 12" AC/DC +/- 75 to 90 65 to 85 9.1 E6011 E4311 1/8" x 14" AC/DC - 75 to 120 70 to 110 11.4 E6013 E4313 1/8" x 14" AC/DC +/- 110 to 150 100 to 135 11.2 E7014 E4914 1/8" x 14" AC/DC + 110 to 160 100 to 145 10.3 E7018 E4918-1 1/8" x 14" AC/DC + 110 to 150 100 to 135 11.0

ITEM

PRICE

0140045 0140048 0140050 0140052 0140047 0140049 0140051 8011661

22.99 22.99 22.99 22.99 21.99 21.99 21.99 21.99

319

WELDING & CUTTING KITS

10 PK TIG ELECTRODES A) CERIATED TUNGSTEN • 1/16" (1.6 mm) x 6-7/8" long • Tungten steel with 2% thoriate 8215766 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . B) LANTHIATED TUNGSTEN 1/16" Lanthianted tungsten electrode. 8067787 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1999 1599

1 LB TIG FILLER RODS 1/16" rods, 36" long. C) MILD STEEL 8067738 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) STAINLESS STEEL 8067761 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

699 1499

MAGNETIC TIG GUN HOLDER • For holding TIG welding torches • Powerful 4" diameter magnetic base • Makes it easier to locate the gun while working • Protect your gun from drops and damage to the nozzle, tip, or trigger • Can be used for most TIG welding torches 8162869 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1399

CUTTING KITS HEAVY DUTY VICTOR STYLE WELDING & CUTTING KIT • Kit will cut up to 1-1/2", weld up to 1/4" • Kit includes: cutting attachment, torch handle, oxygen regulator, acetylene regulator, 1 cutting tip (3-1-101), #2 welding tip, tip cleaner, flint lighter, pair of welding goggles, 15 ft. welding hose and a sturdy plastic carry case 99 8071235 – Wt. 17.1 lbs. . . . . . . . . . . . . . . .

249

VICTOR STYLE HEAVY DUTY CUTTING TIPS OXY-ACETYLENE CUTTING TIPS Wt. 0.2 lbs.

Tip Size 0-1-101 1-1-101 2-1-101

Cutting Cap. 1/2" 3/4" 1-1/2"

ITEM 8006466 8006468 8006469

PRICE

999

PROPANE & NATURAL GAS CUTTING TIPS

Wt. 0.5 lbs.

Wt. 0.2 lbs.

Tip Size 0-GPN 1-GPN

Cutting Cap. 1/2" 3/4"

ITEM 8006471 8006473

HEAVY DUTY VICTOR STYLE WELDING TIPS INCLUDES MIXER

PRICE

1199

Tip Size 0-1 1-1 2-1

Weld Cap. 1 to 2 mm 2 to 3 mm 4 to 5 mm

ITEM 8176315 8176323 8176331

PRICE

1499

MEDIUM DUTY VICTOR STYLE WELDING & CUTTING KIT • Kit will cut up to 1/2" and weld up to 1/4" • With optional tip, kit will cut up to 3" • Includes: torch handle and cutting head, oxygen and acetylene regulators, #0, #2 and #4 welding tips, 1 heating tip, 15 ft. twin hose, goggles, flint lighter, tip cleaner, and sturdy plastic case 0110239 – Wt. 15.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18999

VICTOR STYLE MEDIUM DUTY CUTTING TIPS OXY-ACETYLENE CUTTING TIPS PROPANE & NATURAL GAS CUTTING TIPS

Wt. 0.1 lbs.

320

Tip size 0-3-101 1-3-101 2-3-101

Cutting Cap. 1/2 3/4 1-1/2

ITEM 8006475 8006477 8006478

PRICE

999

Wt. 0.1 lbs.

Tip size 0-3GPN 1-3GPN

Cutting Cap. ITEM PRICE 1/2 8006479 99 3/4 8006482

• Kit will cut up to 1" and weld up to 1/4" • With optional tip, this kit will cut up to 3" • Includes: torch handle, oxygen and acetylene regulators, cutting attachment with 6290-1 cutting tip, #3, #5 and #7 welding tips, 15 ft. twin hose, goggles, flint lighter, tip cleaner and sturdy plastic case 99 0110742 – Wt. 16.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .

189

HARRIS STYLE CUTTING TIPS OXY-ACETYLENE CUTTING TIPS PROPANE & NATURAL GAS CUTTING TIPS

Wt. 0.1 lbs.

Tip Size 6290-1 6290-2 6290-3

Cutting Cap. 5/8" to 1" 1" to 2" 2" to 3"

ITEM 8006483 8006485 8006487

PRICE

999

Wt. 0.2 lbs.

Tip Size Cutting Cap. 6290-1-NX 5/8" to 1" 6290-2-NX 1" to 2"

ITEM 8006488 8006489

PRICE

Wt (lbs.)

ITEM

PRICE

3.4

8079006

59.99

3.5

8078982

59.99

1.2 0.9

8078958 8078842

59.99 44.99

1.9

8078966

74.99

1.0

8078867

59.99

0.3

8099913

9.99

0.4 0.7

8078933 8176372

19.99 19.99

1199

OXY-ACETYLENE WELDING

MEDIUM DUTY HARRIS STYLE WELDING & CUTTING KIT

OXY-ACETYLENE WELDING ACCESSORIES MEDIUM DUTY OXY-ACETYLENE WELDING COMPONENTS A

D E F C G

H Description A B C C D D E F F

Specs

• Working pressure: 0 to 36 PSI • Max delivery pressure: 20 PSI ACETYLENE REGULATOR • Max flow: 530 SCFH • Working pressure: 0 to 230 PSI • Max delivery pressure: 145 PSI OXYGEN REGULATOR • Max flow: 3,000 SCFH Forged brass body HARRIS STYLE TORCH HANDLE Forged brass body VICTOR STYLE TORCH HANDLE HARRIS STYLE • Forged brass body • Stainless steel tubes CUTTING ATTACHMENT VICTOR STYLE CUTTING • Forged brass body • Stainless steel tubes ATTACHMENT HARRIS STYLE Required to attach welding tips to torch handle WELDING TIP MIXER #6 tip size VICTOR STYLE HEATING TIP #1 tip size HARRIS STYLE HEATING TIP

G) HARRIS STYLE WELDING TIPS Tip Orifice Welding Wt size size cap. (lbs.) ITEM PRICE #3 0.8 mm 2 to 3 mm 0.1 8079022 99 #5 1.1 mm 3 to 5 mm 0.1 8079030 #7 1.5 mm 5 to 7 mm 0.1 8079055

H) VICTOR STYLE WELDING TIPS with MIXER Tip Orifice Welding Wt size size cap. (lbs.) ITEM PRICE #0 0.8 mm 1 to 2 mm 0.2 8078909 99 #2 1.0 mm 2 to 3 mm 0.2 8078917 #4 1.7 mm 5 to 7 mm 0.3 8078925

321

OXY-ACETYLENE WELDING

WELDING HOSE - GRADE R - NON-OIL AND FLAME RESISTANT TUBE AND COVER Standard hose for lighter duty applications using oxygen and/or acetylene only. The inner and outer cover are made of rubber that resistants neither oil or flame. WELDING HOSE - GRADE T - OIL AND FLAME RESISTANT TUBE AND COVER Grade T is the choice for industrial applications where hose may be exposed to sparks, oil, grease or abrasion. Great for shops that use more than one fuel gas. Compatible with oxygen and popular fuel gases, including acetylene, hydrogen, propylene, propane, natural gas and MAPP gas. Both the inner tube and the outer cover are made of oil-resistant and flame-retardant rubber compound.

OXY-ACETYLENE WELDING ACCESSORIES A

A) FLASHBACK ARRESTOR SET • Prevents flame flashbacks into hose • Max. operating pressures: acetylene: 21 PSI, oxygen: 210 PSI 0140274 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) QUICK CONNECTOR SETS HOSE TO REGULATOR 8010261 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HOSE TO TORCH HEAD 8059940 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 1/4" OXY-ACETYLENE WELDING HOSE • “B” type ends • Fits all standard oxy-acetylene kits • Grade R, max. pressure: 200 PSI 25 FT LONG 0140213 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 FT LONG 0140212 – Wt. 11.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) OXY-ACETYLENE WELDING HOSE REEL • 1/4" x 50 ft. grade ‘T’ hose, for use with all fuel gases • 300 PSI max. pressure 8201055 – Wt. 40.0 lbs. . . . . . . . . . . . . . . . . . . . . E) 2" REGULATOR GAUGES 1/4" NPT thread.

3299 3499 3499

2799 3999

19999

Wt. 0.3 lbs. 0110053 – 0 to 30 PSI acetylene gauge 0110054 – 0 to 200 PSI oxygen gauge 0110056 – 0 to 4,000 PSI oxygen gauge . . . . . .

899

F) TORCH CIRCLE CUTTING GUIDE • Cuts straight lines and circles (max. 30" dia.). • For medium duty torches Wt. 1.2 lbs. 0140006 – HARRIS STYLE 8076705 – VICTOR STYLE . . . . . . . . . . . . . . . . . .

1999

G) TIP CLEANERS 12 cleaners and a small file. 0141002 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .

249

HEAVY DUTY OXY-ACETYLENE WELDING CART

H I

FLINT LIGHTERS H) SINGLE FLINT LIGHTER 99 8068587 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . 5 PK REPLACEMENT FLINTS 39 /pkg. 0140142 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . I) TRIPLE FLINT LIGHTER 99 8001746 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . 4 PK REPLACEMENT FLINTS 99 /pkg. 0140140 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

322

• 12" wheels roll smoothly over rough terrain • Supplies can be contained in the 4-5/8" x 21-1/4" x 3-1/2" deep tool tray • Base: 9-1/2" x 20-1/2" • 12-gauge (2.5 mm) steel construction 8006521 – Wt. 41.8 lbs. . . . . . . . . . . . . . . . . . .

8999

PROTECTIVE GEAR

OXY-ACETYLENE WELDING GOGGLES

A) PLATE-TYPE GOGGLES • Soft vented vinyl covering provides snug fit and fits over glasses • Complete with flip-front lens making it ideal for chippers, grinders, and welders • Shade #5, 2" x 4-1/4" lens 0140939 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) ROUND SHADE #5 GOGGLES Goggles have vented ports, flip-up front lenses and clear lenses underneath for use while chipping or grinding. 0140947 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) FITTED SHADE #5 GOGGLES • Soft brow and nose guard ensures comfort and snug fit • Side vents to increase airflow 8002530 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) METALWORKING GOGGLES • Clear PVC lens with vented frame • Blocks both UVA and UVB rays • Meets ANSI Z.87.1 8102568 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

799

489 C

999 D

999

WELDING GARMENTS

E) LEATHER BIB APRON • 42" long • Split cowhide, Kevlar sewn and riveted 99 5040117 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . F) SPLIT LEG LEATHER APRON • 34-1/4" long • Split cowhide, Kevlar stiched • Extra protection against molten metal splatter and extreme heat 99 8184236 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . G) LEATHER WELDING JACKET • Size X-large, brown split cowhide • Kevlar sewn and riveted, pockets on sleeves • 36" tall with 26" long cape style sleeves 99 5040096 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . . . H) SPLIT LEG APRON • 24" x 36" • 9 oz green flame retardant Proban cotton 99 8222374 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . .

84 19

I) LIGHTWEIGHT BIB APRON • 24" x 42" • 9 oz green flame retardant Proban cotton 8222408 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

1999

J) LIGHTWEIGHT WELDING JACKET • Size X-Large, 30" length • 9 oz green flame retardant Proban cotton 8222333 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . .

3999

K) LEATHER WELDING SHOE PROTECTOR • Tillman ankle high shoe protectors • Cowhide side split leather, Kevlar stitching 8222416 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . L) WELDING CAPE SLEEVES • Tillman lightweight cape sleeves • 9 oz green flame retardant Proban cotton 8222424 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

2499 K

2999

M) 20" REPLACEMENT BIB FOR CAPE SLEEVES 99 8222432 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

N) WELDING SLEEVES • 18" long with 2-1/4"elastics at both ends • Green Proban flame resistant cotton 8222440 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . .

M N

1699

323

WELDING HELMETS

WELDING HELMETS A

A) FLIP FRONT HELMET • Shade #11, 2" x 4-1/4" lens • Constructed of a lightweight but durable vulcanized fiber material • Flip-front lens retainer and ratchet-adjustable headgear 0140083 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1299

B) WIDE VIEW HELMET • Shade #10 • Large 4-1/2" x 5-1/4" lens for better viewing of work area B

Wt. 1.4 lbs. 8116881 – BLACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2199 99 8116899 – BLACK with PAINTED FLAMES . . . . . . . . . . . . . . 27 C) WIDE VIEW FLIP FRONT LENS WELDING HELMET • Shade #11 lens • Large 4-1/2" x 5-1/4" lens for better viewing of work area 0140005 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2999

D) SOLAR POWERED AUTO DARKENING HELMET • 1/25,000 second switching speed (clear to dark state) at room temperature • Viewing area: 3-13/16" x 1-5/8" viewing area • Variable shade control; shades #9 to #13 • High/low lens sensitivity adjustment • Automatic power on/off with adjustable delay time • UV/IR protection up to shade 16 (DIN) • High impact-resistant nylon shell 99 8078172 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REPLACEMENT EXTERNAL POLY CLEAR LENSES - 5 PC • Fits Powerfist auto darkening helmet 8078172 • 118 mm x 96 mm (4-5/8" x 3-3/4") 8093601 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.99 REPLACEMENT INTERNAL LENSES - 5 PC • Fits Powerfist auto darkening helmet 8078172 • 97 mm x 46 mm (3-13/16" x 1-13/16" 8113623 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.99

WELDING GEAR AND HELMET BAG • Adjustable shoulder strap makes carrying and storage easy • Front pocket with hook and loop closure • Large capacity main compartment with drawstring closure • Two mesh side pockets can hold welding gloves up to 14" or water bottle • Fits all sizes of welding helmets and safety shields • Made from tough 600 denier coated polyester 99 8165458 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WELDING BEANIES

• 100% cotton • Shirred elastic hem 8057443 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Straps adjust to fit most sizes • Breathable 100% cotton fabric keeps you cool while protecting from overhead sparks 49 8041113 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499

REPLACEMENT WELDING HELMET HEADGEAR

324

• Lightweight, durable construction • Ratchet adjustable headgear with padded headband • Fits 0140083 and other non-autodarkening helmets 8070138 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

499

REPLACEMENT LENSES Meets ANSI 287.1 standards. Shade

Suggested Amperage Range Tinted Tinted Glass PRICE Gold Poly PRICE PRICE Glass 4-1/2" x (MMA) (FCAW) (GMAW) (GTAW) (ea.) 2" x 4-1/4" (ea.) (ea.) 2" x 4-1/4" 5-1/2" ARC Flux MIG Gas MIG TIG

8 9 10 11 12 clear

0141382 0140186 8175952 8176018 0140023

Wt. (lbs.)

1.79 1.79 1.79 1.79 0.59

0.1

0140143 0140144 0140146 0140023 0.1

8.49 8.49 8.49 0.59

< 75 <5 3.79 < 20 < 40 5-7 3.79 20-40 75-125 3.79 40-80 125-175 40-80 17-35 3.79 80-175 175-225 80-125 35-100 3.79 175-300 225-280 125-175 100-150 1.49 -

0140020 0140038 0140046 8175960 8175986 8000745 0.2

2" X 4-1/4" POLY MAGNIFYING LENSES • Fits behind filter plate in welding helmets • Ideal for welders who use reading glasses or bifocal lenses

Power Wt. (lbs.) ITEM 1.5 0.1 0140147 2.0 0.1 0140148 2.5 0.1 0140149

PRICE

699

WELDING GLOVES

WELDING GLOVES & LENSES

LENSES

C) SHEEPSKIN TIG GLOVES Form fitting for when manual dexterity and protection is required. A) 12" ECONOMY GLOVES 5050051 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . • 4" cuff D) BLUE COWHIDE WELDERS GLOVES • Genuine cowhide • Lined, 5 finger split cowhide construction • Heat, cold and dirt protection; puncture and • Reinforced palm for longer life abrasion resistant palm and fingertips 99 8089740 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . 5050050 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . E) 14" GLOVES B) 12" GLOVES Cowhide with Kevlar stitching. • Protects against abrasions, 8157083 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . heat, cold, punctures, and dirt F) 13" PREMIUM GLOVES • Genuine cowhide 99 Split elkhide with Kevlar stitching. 5050049 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . 5050099 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . A

1199

3 7

WELDING BLANKET

899

1199

WELDER'S HEAT SHIELD • Reflective aluminum shield over leather pad • Two elastic straps to hold it in place • Reflects excess heat away from glove during welding applications • O’all dim.: 6" x 8-1/4" 8179335 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

699

GAS APPROVED TEFLON TAPE

• Extra thick premium tape • Safe for air, gasoline and compressed gases • 1/2" x 20 ft. 6050054 – Wt. 0.1 lbs. . . . . . . . . . . . . . .

449

PORTABLE WELDING SCREEN

• 6 ft. x 6 ft. • 24 oz fibreglass blanket with gold acrylic neoprene coating • Max. temp. 540°C (1,000°F) • .034" thick • Medium duty • Grommets on 18" centers • Resists general purpose welding, sparks, splatter, abrasion • Lock stitched with heat resistant fibreglass thread 99 8162836 – Wt. 5.5 lbs. . . . . . . .

• 6 ft x 6 ft., 14 mil screen • Screens are held by strong adjustable ties through heavy duty grommets on 12" centers and hemmed with strong, flame resistant Kevlar® thread • Welding screens offer optical safety, spark containment, durability, temperature and noise control 8192775 – Wt. 18.6 lbs.. . . . . . . . . . . . . . . . . . . . . . . . . .

14999

325

WELDING MAGNETS & CLAMPS

WELDING ACCESSORIES MULTI-USE MAGNETIC HOLDERS A

A) 2 PK MINI WELDING MAGNETS • Holds metal at, 45°, 90°, and 135° angles • O’all dim.: 2-5/16" x 2" x 9/16" • 2 lb. capacity 8178790 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) MULTI-ANGLE WELDING MAGNET • Holds metal at 30°, 45°, 60°, 75°, and 90° angles • O’all dim.: 3-3/4" x 2-1/2" x 9/16" • 15 lb. cap. 8178808 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . ARROW STYLE WELDING MAGNETS • Ideal for holding objects while tack welding, soldering and pipe installation • Holds materials at 45°, 90°, and 135° angles C) MEDIUM • O’all dim.: 4-5/8" x 3-1/4" x 9/16" • 15 lb. cap. 8089351 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . D) LARGE • O’all dim.: 6-1/8" x 4" x 11/16" • 35 lb. cap. 8089369 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . E) X-LARGE • O’all dim.: 7-1/2" x 4-3/4" x 1" • 60 lb. cap. 8089377 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . F) 45° x 90° MAGNET • With quick release switch • Ideal for any metalworking, welding, or fabrications • For angle, square, or round stock 8136244 – 25 LB CAP Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . 8123929 – 75 LB. CAP Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . G) ADJUSTABLE WELDING MAGNET Adjustable welding magnet can hold materials in almost any configuration required. 8181539 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

399

299

499 699

1499 1699

F G

899

LOCKING WELDING CLAMP PLIERS

PLUG WELD LOCKING PLIER

9" WELDING CLAMP Jaws open 1-5/8". 2920783 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . 14" WELDING CLAMP Jaws open 2-3/4". 2920685 – Wt. 2.6 lbs. . . . . . . . . . . . .

• Copper alloy knurled swivel pad prevents burn through when plug welding thin sheet metal • U-shape allows even pressure around spot welds • Weld does not stick to copper and allows quick cooling of weld 99 8003378 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

1699

SHEET METAL CLAMP PLIER

WELDING VISE

• Clamps metal at right angles for welding and metal working applications • Makes bending, forming, and crimping easier • 2-1/4" max. jaw opening • Jaw width: 3-1/8" 99 • Slotted base for easy mounting 8158099 – Wt. 11.1 lbs. . . . . . . . . . . . . . . . . . . . . 2911774 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . .

TECH TIPS 326

3499

Electric arc welding and cutting processes produce intense electric and magnetic (electromagnetic) fields. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device.

A) MAGNETIC GROUND CLAMPS 200 AMP 6.6 lb. pull cap. 0140228 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 AMP 22 lb. pull cap. 0140798 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 300 AMP GROUND CLAMP 8134207 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 500 AMP GROUND CLAMP 0140699 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 300 AMP ALERCO STYLE GROUND CLAMP 0140264 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) 500 AMP ALERCO STYLE GROUND CLAMP 0140265 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C B

699

1499 499 899 1399 1699

ELECTRODE HOLDERS F) TWEECO STYLE 300 amp. 8134231 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) SCREW TYPE BERNARD STYLE 400 amp. 0140681 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899

1499

WELDING CABLE & ACCESSORIES

GROUND CLAMPS

WELDING ACCESSORIES H H) WELDING CABLE • Flex-a-prene, a tough EPDM jacket • Extra flexibility for extreme temperatures -50° to 105°C (-58° to 220°F) • Great for welders and heavy duty booster cables See page 190 for battery clamps. Max. Wt. PRICE # Strands Amps (lbs./ft.) ITEM (ft.) 4 406 140 0.2 8143810 1.59 2 648 190 0.2 8143828 2.49 1 804 220 0.3 8143836 2.99 1/0 1026 260 0.4 8143844 3.49 2/0 1273 300 0.5 8143851 4.29 * Rated @ 100 ft/240 V

WELDING CABLE CONNECTORS

I) PKG. OF 2 LUGS • Fits #2 and #4 cables • 1/2" mounting hole 99 0140250 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . I) SOLDER ON WELDING LUG • Use for 1/0 and 2/0 welding cable • 1/2" mounting hole 49 /ea. 8009282 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . J) HAMMER ON COPPER WELDING LUG • 2 pack • No crimping required • 1/2" mounting hole FITS #1 & #2 CABLES 99 8072571 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . FITS #1/0 & #2/0 CABLES 99 8072563 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

Dinse International style. Jack diam. lbs. ITEM PRICE Size 9 mm #4 Cable 0.2 0140013 8.49 12 mm 0.7 0140014 10.99 #2 Cable #2/0 Cable 12 mm 0.7 0140016 11.99

EXTENSION CABLE CONNECTORS • Lenco style • Suitable for multiple sizes of welding cable • Comes complete with shivs and allen wrench FOR #4, #2 and #1 CABLE 99 0140202 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . FOR 1/0 and 2/0 CABLE 99 0140267 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

12 12

8 9

WELDING WIRE CRIMPER Used to crimp on battery and welding cable lugs. 8167926 – Wt. 7.1 lbs. . . . . . . . . . . . . . .

6999

327

WELDING BRUSHES & HAMMERS

WIRE BRUSHES

A) 10" CARBON STEEL BRUSH 4 x 16 row. 0140715 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 10" BRASS BRUSH Moulded plastic grip. 0140129 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) 10" TEMPERED STEEL BRUSH 5 x 31 row bristles. 8005946 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

99¢

199 499

HEAVY DUTY WIRE BRUSHES

BRUSH SETS

G D E D) NYLON, BRASS, & STAINLESS STEEL BRISTLES 1-3/8" bristle head with o’all length of 7". 0140483 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . E) NYLON, BRASS, & STEEL BRISTLES 3-3/8" bristle head with o’all length of 9". 0140491 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

CHIPPING HAMMERS

F F) 11" TEMPERED STEEL BRUSH 5 x 15 row bristles with 2-3/4" scraper. 0140098 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . G) 4 X 18 ROW WIRE BRUSH 99 O’all length: 13-3/4". STAINLESS STEEL BRISTLES 0140101 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . BRASS BRISTLES 0140099 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

199

349

429 499

STAINLESS STEEL WIRE BRUSH H • Plastic Body • 13" O'all length • 3x19 rows of bristles • 6" x 3/4" bristle area 8171068 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

STAINLESS STEEL ROUND BRUSH H) 9" CHIPPING HAMMER Forged steel head, shaft, and spring handle. 0140806 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . I) 12" CHIPPING HAMMER • Fibreglass handle with rubber grip • 5-1/2" head 0140229 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499 99

199

WELDING ROD POUCH

WELDING ROD STORAGE SYSTEM

328

• 14" long x 3/4" diam. • Stainless steel bristles 2940029 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Split leather reinforced • Extends rod life by sealing out air and moisture rivet construction • Holds 10 lbs. of 12" or 14" rods • Chipping hammer loop • Made of high impact polymers with belt clip and striker clip for easy carrying 99 • 13-3/4" deep 8089732 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . 8056160 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

799

SOLDERING

ELECTRIC SOLDERING GUNS A A) BATTERY OPERATED SOLDERING IRON • Heats up to 185°C in 7 seconds • Max. temp.: 565°C • Approximately equivalent to a 15W soldering Iron • Includes cone-type iron-clad tip and protective cap • Built-in LED light 8199358 – 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1299

B) PENCIL SOLDERING IRON with STAND 120V, 45 watt. 99 3410020 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) HD PENCIL SOLDERING IRON with STAND • 120V, 80 watt • For stained glass and other projects • 3/8" Wide flat tip 99 8175077 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) PENCIL SOLDERING IRON with ADJUSTABLE CONTROL • 120V, 0 to 60 watt max. • Adjustable heat control 99 8103590 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E) PISTOL GRIP SOLDERING IRON •120V, 35 watt • Includes solder, stand, and 2 replacement tips 99 3412426 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) PISTOL GRIP DUAL HEAT SOLDERING GUN • 120V, 100/140 watt • Built-in light to illuminate work 99 3410938 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G) PROFESSIONAL SOLDERING GUN • 120V, 230/150 watt • Dual stage trigger: 150 watt – 503°C (low power), 230 watt – 760°C (high power) • Built-in light to illuminate work • 15 g of solder and 2 general purpose tips included 99 8005107 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14 11

H) SOLDERING KIT • 120V, 100 watt, 1 general purpose and 1 plastic cutting replacement tip • Built-in light to illuminate work • Includes: tweezers, heat sink, 3 accessory tools, solder, and a sturdy plastic case 99 3410026 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PC SOLDERING TIP SET for 3410026 99 8004231 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34 3

SOLDERING ACCESSORIES HEAT-RESISTANT SOLDERING TWEEZERS • Fibre grip • O’all length: 6-1/2" • Cross locking; must press handle to open

Wt. 0.1 lbs.

I) 2920065 – STRAIGHT POINT J) 2920064 – CURVED POINT . . . . . . . . . . . . . . . . . . . . .

249/ea.

K) VACUUM DESOLDERING TOOL 3410022 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L) SOLDERING AID TOOL Designed to hold 2 wires in place for hands free soldering. 8003785 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

1299

329

SOLDERING

SOLDER

SOLDERING FLUX

• High quality Orange Crush™ paste flux • For use with lead and lead free solder • 2 oz. 8001061 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

499

SOLDERING FLUX

A) ROSEN CORE – CONTAINS LEAD • 4 oz roll • For electronics 8170045 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . B) PURE BOND SOLDER LEAD FREE - 97% TIN, 3% COPPER For houshold plumbing. 4 OZ. 8011929 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . 8 OZ. 8011938 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

799

789 1499

• Use with all lead free solders and soft solders • Cleans as you solder • Non toxic • 4 oz 6440023 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

BRUSH

699

12" BRAZING & SOLDERING RODS ®

2 PK NICKEL SILVER BRAZING RODS • Ideal for stainless steel, cast iron, nickel, and brass • Widely used to repair bicycles, metal furniture, railing, and radiators • 85,000 PSI tensile strength with an 816°C (1,500°F) working temperature • Flux coated 99 0141127 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . /pkg.

• Pack of 12 acid brushes • Great for plumbing, soldering, etc. • Strong steel handle 8037910 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

4 PK LOW FUMING BRONZE BRAZING RODS • Easy to apply, general purpose brazing rod • Recommended for repair of steel, cast iron, copper base metals, galvanized and malleable irons • 60,000 PSI tensile strength with an 871°C (1,600°F) working temperature • Flux coated 99 /pkg. 0141119 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

2 PK ALUMINUM SOLDERING RODS • Ideal for soldering aluminum windows, doors, and joints on boats, gutters, siding, etc. • Brinnel hardness rating of 100 with a 399°C (750°F) working temperature 99 0141135 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . /pkg.

1/2 LB. BRONZE BRAZING RODS • Round rods • Low fuming, flux coated bronze for brazing iron based materials Wt. 0.6 lbs.

0110124 – 3/32" x 18" 0110125 – 1/8" x 18" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solder paste is a mixture of solder and flux for targeted applications. Semi-solid consistency allows for easy dispensing. Use with lighter, torch, etc. for fast effective repairs. Lead free.

799/pkg.

ALUMINUM SOLDER PASTE

COPPER SOLDER PASTE

• Flows at 220°C (430°F) • For plumbing, or use with copper, brass, bronze, stainless and nickel • Safe for use in potable water applications 8127011 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

PLASTIC WELD

330

• Flows at 200°C (395°F) • Used to join aluminum to aluminum or aluminum to other metals • Tensile strength of 28,000 PSI 8141483 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

SILVER BEARING SOLDER PASTE

• Flows at 90°C (190°F) • Provides permanent repairs for plastics ABS • Flows at 220°C (430°F) radiator tanks, bumper covers, fenders or • For electrical connections, or use with virtually any plastic part copper, brass, bronze, platinum, chrome, • May be drilled, sanded, tapered and painted stainless, and nickel • Activated with a heat gun or torch 99 • 10,000 to 25,000 PSI tensile strength 8127029 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 8127003 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

599

AERO TORCH KIT • Attaches directly to all sizes of Ronson's multi-fill butane fuel • Adjustable flame • Butane burns at a max. temperature of 1,300°C (2,400°F) • Includes stand, refillable lighter, and 42 g butane fuel 8196800 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2499

BUTANE TORCH SOLDERING KIT

POCKET TORCHES

BUTANE TORCHES

A B C A) POCKET TORCH • High impact nylon housing • Auto ignition, refillable butane • Equipped with safety lock, flame adjusting lever, and cap with chain 8007051 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) PIEZO START MICRO TORCH 2 hour burn time per butane fill. 0141010 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . C) MICRO SOLDERING TORCH • Soldering tip temp: 400°C (750°F) • 20 ml (8 g) fuel capacity • Safety lock, adjustable flame 8007033 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

• Self igniting, refillable butane, up to 90 minutes operating time per fill • Includes torch, hot blow head, soldering head, 4 soldering tips, plastic cutting tip, safety cup, 99 and stand • Equivalent to 30W/135W outputs • Automotive repairs, electrical circuit repair, thawing frozen locks, soldering or welding 99 plastics, & plumbing • Adjustable flame controller • Safety lock system 99 8010485 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

3499 TECH TORCH KIT

BUTANE SOLDERING TORCH • For home soldering jobs, heat shrink tube, electrical repair, bending glass, plastic, or metal tubing • Up to 60 minutes per fill • Temperature controlled by varying gas flow • Ceramic head for prolonged service life • Soldering gun up to 400°C (750°F) • Includes torch, soldering tip, stand, and coil of solder • Built in Piezo igniter 99 0140086 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

20 ml. (8 g) fuel cap. KIT INCLUDES: • Connector attachment threaded for various tips • Fine point soldering tip • Chisel soldering tip • Hot air blower tip • Ronson 42 g (1.5 oz.) multi-fill butane refill • Refillable Ronii butane lighter 99 8143265 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

BUTANE GAS Universal fueling tip fits most refillable units 42 g (1.5 oz.) 8147423 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 g (6 oz.) 6420035 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299 499

FUEL & OXYGEN ARE HAZARDOUS GOODS AND CANNOT BE SHIPPED. PLEASE VISIT YOUR LOCAL PRINCESS AUTO TO PURCHASE.

331

PROPANE TORCHES

PROPANE TORCHES PROPANE TORCHES & FUEL ®

A) PROPANE TORCH Complete with 14.1 oz. propane cylinder. 99 0140582 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . B) INSTANT LIGHT PROPANE TORCH • Torch lights instantly with the touch of a finger • Comfortable, easy to hold grip built into torch • Complete with 14.1 oz. propane cylinder 99 0140166 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . C) PRO MAP GAS • Produces a much hotter flame than gas • Ideal for brazing and welding • 14 oz. size 99 8211351 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . D) PROPANE FUEL Standard 14.1 oz. size. 99 0140673 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . E) OXYGEN 1.1 cu. ft. size. 99 0140665 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

A B

39 10

4 9

PROPANE TORCH

500,000 BTU PROPANE TORCH KIT

HOSES & POL FITTINGS SOLD SEPARATELY Forged steel weighs less than cast iron and head dissipates heat quickly after use. 50,000 to 200,000 BTU TORCH 99 8009807 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . 90,000 to 375,000 BTU TORCH 99 8009781 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . .

• 500,000 BTU propane torch • For weed burning, asphalt repair, melting ice and thawing pipes • Includes 10 ft. neoprene hose, POL fitting, striker and replacement flints 99 8133936 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . . .

69 74

PROPANE TORCHES

PROPANE HOSE & FITTING

PROPANE HOSE 1/4" propane hose with female thread swivel ends, 9/16" x 18 LHT. 10 FT. 8005534 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . . 20 FT. 8005543 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . .

19 39

PROPANE TANK FITTING • 9/16"-18 LHT x POL • Use to connect torch hose to propane tank 8005552 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

F) PRECISION BURNER TORCH • Use with a standard propane gas cartridge 99 • Ideal for electrical applications • Self-igniting with adjustable flame control 99 • Operates at any angle 99 0140084 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . G) SWIVEL TUBE TORCH • Black housing with stainless steel tube • 360° swivel angle tube with easy on/off valve • Temp: 1,980°C (3,600°F) for mapp gases 1,370°C (2,500°F) for propane 79 99 8007060 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

FUEL & OXYGEN ARE HAZARDOUS GOODS AND CANNOT BE SHIPPED. PLEASE VISIT YOUR LOCAL PRINCESS AUTO TO PURCHASE.

TECH TIP

332

Do not weld or cut on material having a combustible coating or combustible internal structure, as in walls or ceilings, without an approved method for eliminating the hazard.

WELDING MANUAL • Covers gas (oxy-acetylene), arc, MIG, and TIG welding, soldering, and flame cutting • Shows techniques related to automotive and workshop repairs • Equipment selection guideincluded 4490001 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2299

ARC WELDING VIDEO 1

WELDING INSTRUCTION

WELDING INSTRUCTION Instructional DVD’s for hobby and intermediate welders alike

• Includes all you need to know to get started using your arc welder using thorough narrative and excellent video • 44 mins. 8132185 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2799

ARC WELDING VIDEO II • The Arc Welding II video provides an in-depth demonstration of metal preparation, joint fit up, and welding techniques for corner, lap, “T”, and butt joints, including “V” beveled with a back up bar and “V” beveled open butt • Shielded Metal Arc Welding Demonstration – detailed explanations, along with close-up video of the actual welds, show how the amperage setting, travel speed, rod angle, arc gap and rod movement are used to control penetration, the shape and the quantity of weld • 45 mins. 99 8141442 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MIG WELDING VIDEO • Includes all you need to know to get started using your mig welder using thorough narrativeand excellent video • 45 mins. 8132193– Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2799

OXY-ACETYLENE WELDING VIDEO • The Oxy-Acetylene Welding video provides close-up demonstrations with step by step explanations of adjusting the regulators, lighting the torch, dipping filler rod, and controlling the molten puddle • 42 mins. 99 8141475 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TORCH CUTTING VIDEO • The torch cutting video provides an in-depth guide to using the cutting torch effectively • Detailed explanations, with close-up demonstrations cover the basic fundamentals from setting up the equipment to making clean, straight cuts. Also included are practical demonstrations of common torch cutting situations • 45 mins. 99 8141467 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333

AXLES & COMPONENTS

11 Truck & Trailer

7/24/08

10:53 AM

Page 334

AXLES & COMPONENTS MEASURING AXLES

Underslung

Overslung With our Running Gear Axles, the springs can be mounted over or under the axle, depending on the clearance you desire.

The industry standard for measuring axles is hub face to hub face.

AXLES 2,000 LB CAP • 1-3/4" tube dia. • Idler hubs

3,500 LB CAP • 2-3/8" tube dia. • Idler hubs

3,500 LB CAP DROP AXLE • 2-3/8" tube dia.

Hub Face 48" 60" 60" 89"

Hub Style Spring Centre Wt. (lbs.) 5-bolt 36" 30.0 4-bolt 48" 31.5 5-bolt 48" 31.5 5-bolt 74" 38.0

Hub Face 72"

Hub Style 5-bolt

Spring Centre Wt. (lbs.) 58" 50.0

80"

5-bolt

62"

95"

5-bolt

80"

Hub Face Hub Style Spring Centre 85"

5-bolt

69"

ITEM 8186678 8186686 8186694 8186702

PRICE

13999

ITEM 8186710

PRICE

56.0

8186728

16499

57.5

8212300

Wt. (lbs.)

ITEM

PRICE

65.0

8189912

20999

AXLES with BRAKES Size Hub Face Bolt Hub Tube Dia. Spring Centre Wt. (lbs.) ITEM PRICE 72" 5 bolt 2-3/8" 58" 104.0 8186736 349.99 3,500 LB CAP 85" 6 bolt 3" 69" 160.0 8186744 499.99 6,000 LB CAP

AXLE MOUNTING KITS A A) 3,500 LB AXLE MOUNTING KIT Includes: • Two 1,750 lb. cap., 4-leaf, 25-1/4" eye-to-eye leaf springs (2080032) • U-Bolt mounting kit (2080027) • Suspension mounting kit (2080025) • Ten 1/2" x 60 wheel nuts (8191009) 99 8186645 – Wt. 36.6 lbs. . . . . . . . . . . . . . . . .

B) 6,000 LB AXLE MOUNTING KIT Includes: • Two 3,400 lb., 5-leaf, 27" slipper springs (8190951) A) 2,000 LB AXLE MOUNTING KIT • Slipper spring mounting kit Includes: • Twelve 1/2" x 60 wheel nuts • Two 1,250 lb. cap., 3-leaf, 25-1/4" eye-to-eye 8186660 – Wt. 40.0 lbs. . . . . . . . . . . . . . . . . leaf springs (2080096) SINGLE 6,000 LB AXLE HANGER KIT • U-bolt mounting kit (2080028) 8167470 – Wt. 22.0 lbs. . . . . . . . . . . . . . . . . • Suspension mounting kit (2080025) • Ten 1/2" x 60 wheel nuts (8191009) 99 TANDEM 6,000 LB AXLE HANGER KIT 8186652 – Wt. 26.0 lbs. . . . . . . . . . . . . . . . . 8167488 – Wt. 57.0 lbs. . . . . . . . . . . . . . . . . B

334

8999 4999 9999

11 Truck & Trailer

7/24/08

10:53 AM

Page 335

• Axle arms flex with built-in rubber cushioning, absorbing road shock for a smoother ride • Mounts directly to the frame with 4 bolts, no springs, u-bolts or hangers required

A) 2,000 LB AXLE ENDS • Cap.: 2,000 lbs. per pair • 4-bolt hub

B) 3,500 LB AXLE ENDS • Cap.: 3,500 lbs. per pair • 5-bolt hub on 4-1/2" centres

Wt. 33.0 lbs.

8212118 – RIGHT 8212110 – LEFT . . . . . . . . . . . . . . . . . .

14999/ea.

Wt. 45.0 lbs. 8211609 – RIGHT

8211617 – LEFT . . . . . . . . . . . . . . . . .

18999/ea.

MOUNTING KITS C) TANDEM AXLE MOUNTING KIT • Complete hardware for mounting 2 running gear assemblies in tandem • Rated 2,000 to 7,000 lbs. • Use with double-eye springs up to 1-3/4" width 8211666 – Wt. 19.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) TANDEM AXLE YOKE Rated up to 7,000 lbs. 8212136 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . E) SUSPENSION MOUNTING KIT • For mounting 2 slipper springs • Rated up to 3,500 lbs. 2080068 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) SUSPENSION MOUNTING KIT • For mounting 2 eye to eye springs • Rated up to 3,500 lbs. 2080025 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AXLES & COMPONENTS

EQUALIZER TORSION AXLE ENDS

4599 D

/ea.

1499

1999

AXLE COMPONENTS HUBS G H

1,000 LB HUBS 2,000 lb. cap. when used in pairs. Studs Bolt Circle Wt. ITEM PRICE Dia. (lbs.) 4 4" 7.0 8211674 34.99 G 5 4-1/2" 7.5 8211682 36.99 H I) 1,750 LB HUB • For wheels over 12" • 3,500 lb. cap. when used in pairs Studs Bolt Circle Wt. ITEM PRICE Dia. (lbs.) 5 4-1/2" 8.5 8211708 44.99

E-Z LUBE HIGH SPEED STUB-AXLE ASSEMBLIES • Grease both inner and outer bearing without disassembling hub • Simply attach grease gun to the outside grease nipple and grease both bearings in 1 operation • Special machined channel allows grease to flow to inner bearing To Fit Wheel 4-Hole 5-Hole

Bolt Circle 4" 4.5"

Pilot Hole 2.50" 2.50"

Cap. (lbs./Hub) 1,000 1,000

Spindle dia. x Length 1.25" x 8.85" 1.25" x 8.85"

Stub Length 4.18" 4.18"

Wt. (lbs.) 8.5 9.2

ITEM

PRICE

2080174 2080166

6499

335

AXLES & COMPONENTS

11 Truck & Trailer

7/24/08

10:53 AM

Page 336

LOW SPEED IMPLEMENT STUB-AXLE ASSEMBLIES • Use on implements, wagons and trailers • Not intended for highway use! Bolt Pilot Cap.* Circle Hole (lbs./Hub) 6-Hole 6" 4.62" 3,600 6-Hole 6" 4.62" 6,000 * Capacity in lbs. per individual hub. To Fit Wheel

Spindle Dia. x Length 1-3/4" x 14" 2-1/2" x 14"

Stub Length 9.75" 7.80"

Wt. (lbs.) 19.4 30.8

ITEM

PRICE

2080075 2080059

79.99 114.99

HIGH SPEED STUB-AXLE ASSEMBLIES BUILD YOUR OWN UTILITY, BOAT, OR SNOWMOBILE TRAILER! Chevy & Ford/Dodge assemblies fit most wheels to date as long as the bolt circle and the pilot hole match. Bolt Pilot Circle Hole 4-Hole 4" 2.50" 5-Hole 4.5" 2.50" 5-Hole Chevy 4.75" 2.50" 5-Hole Ford/Dodge 4.5" 2.50" * Cap. in lbs. per individual hub. To Fit Wheel

Cap.* (lbs./Hub) 1,250 1,250 2,000 2,000

Spindle Dia. Stub Wt. x Length Length (lbs.) ITEM 1-1/4" x 9-1/2" 4.65" 7.8 2080000 1-1/4" x 9-1/2" 4.65" 8.6 2080067 1-3/4" x 8-1/4" 4.00" 12.0 2080018 1-3/4" x 8-1/4" 4.00" 12.1 2080026

PRICE 59.99 62.99 74.99 74.99

REPLACEMENT DUST CAPS

DRIVE PLATES For stub axle-hub assemblies.

• Designed to be welded to “W” series weld-on-hubs • Select the hub with the desired bore • Weld it to the drive plate with the required bolt pattern to build a drive hub

Fits Axle-Hub Wt. (lbs.) 2080000, 2080067 0.1 2080018, 2080026, 0.1 2080083 2080075 0.1 2080059 0.2

Wt. 2.1 lbs.

2080307 – 4-BOLT 2080315 – 5-BOLT . . . . . . . . . . . . . . . . . . . . . . .

ITEM PRICE 8043280 1.49 8043299

2.49

8043306 8043315

2.99 3.49

1499 GREASE & DUST CAP TOOL

Shop online or download our catalogue!

www.princessauto.com AXLE GREASE SEAL KITS

• Tapered jaws of tool fit behind the crimped edge of dust cap • Handle is designed to pry hub cap loose 2990281 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

1799

WHEEL BOLTS Axle Type Wt. (lbs.) 2,000 lb. 0.3 3,500 lb. 0.3 5,200 lb to 7,000 lb. 0.3

1/2" WHEEL BOLT Fits all our axle hubs except 2080059. ITEM PRICE 2081198 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . 8212102 5.99 9/16" WHEEL BOLT 8212185 6.99 Fits axle hub 2080059. 8212227 8.99 2081180 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

119/ea. 119/ea.

TECH TIP Trailer tires are not designed to wear like automobile tires. Typically a trailer tire exceeds is usable safe service life before the tire appears worn out. After three years an average trailer tire will lose 30% of its strength so it is recommended to replace trailer tires every 3 or 4 years under normal operating conditions. Overloaded trailers and/or under inflated tires greatly reduce trailering safety and tire life span. For safety, check tire inflation pressure before every trip.

336

11 Truck & Trailer

7/24/08

10:53 AM

REPLACEMENT WHEEL BEARING KITS

Includes 2 bearings with races, 1 grease seal, and cotter pin. Outer Wt. Spindle PRICE Hub I.D. (lbs.) ITEM O.D. /set 1" 1.980" 0.6 2080008 11.99 1-1/16" 1.980" 0.6 2080009 12.99 1-3/8" x 1-1/16" 1.980"* 0.7 2080013 12.99 1-3/8" x 1-1/16" 1.980"** 0.7 2080014 15.99 *Inner cup O.D. 2.361 **Inner cup O.D. 2.328"

3,500 LB AXLE WHEEL BEARING KIT Contains : Bearings, races, seal, grease cap, cotter pin, spindle nut and washers. 99 2080055 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . 6,000 LB AXLE WHEEL BEARING SET Replacement bearings, seals and dust cap for 6,000 lb. axles. 99 8008823 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . .

19 21

TAPERED ROLLER BEARING SETS

Bearing Cone # LM11949 L44643 L44649 LM67048

Cup # LM11910 L44610 L44610 LM67010

• Set consists of bearing and cup • Replacement for most trailer wheel bearings I.D. O.D. Width Wt. (lbs.) ITEM 0.750" 1.781" 0.610" 0.3 3870075 1.000" 1.980" 0.560" 0.3 3870076 1.0625" 1.980" 0.560" 0.3 3870077 1.250" 2.328" 0.560" 0.4 3870079

WHEEL BEARING PROTECTORS

AXLES & COMPONENTS

WHEEL BEARING SETS

Page 337

PRICE 4.99 5.49 5.79 5.99

WHEEL NUTS & BOLTS A B

A) 10 PC WHEEL NUTS • Fits wheels with 1.98" I.D. hub 1/2" x 60. • Helps keep water and dirt out of wheel hubs 99 8191009 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . • Dust covers included • Chrome plated steel housing 99 B) 5 PK WHEEL STUDS 8186967 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . 1/2" x 1-13/16" replacement wheel stud. 99 8212151 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) NUT AND WASHER SET SHACKLE KITS 2 nuts, plain washers, D washers, tang washers and cotter pins for 1" spindle. 99 8212169 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . For axles up to 3,500 lb. cap. SINGLE TECH TIPS Two 3" straps with bolts and nuts. 99 Do not overload a trailer. 8008849 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . TANDEM Keep the load 200 lbs. Four 2" straps with bolts and nuts. 99 below the rated capacity. 8008872 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . .

5 6

U-BOLT MOUNTING KITS D

E and F

D) FITS 1-3/4" DIA ROUND TUBING Rated up to 2,000 lbs. 2080028 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . E) FITS 2-3/8" DIA ROUND TUBING Rated up to 3,500 lbs. 2080027 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . F) FITS 3" DIA. ROUND TUBING Rated up to 6,000 lbs. 8190985 – Wt. 8.1 lbs. . . . . . . . . . . . . . . . . . . G) FITS 2" x 2" SQUARE TUBING Rated up to 3,500 lbs. 2080076 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . .

799/pr.

1299/pr. 1999/pr.

1999/pr.

337

BRAKES

11 Truck & Trailer

7/24/08

10:53 AM

Page 338

LEAF SPRINGS E B

A B C D E

No. of leaves 3 3 4 4 2 4 4 5

Cap. per Spring 1,250 lbs. 1,300 lbs. 500 lbs. 1,750 lbs. 500 lbs. 1,000 lbs. 1,750 lbs. 3,400 lbs.

Centre eye to eye 25-1/4" 23-1/4" 29" 25-1/4" 24" 24" 29" 27"

Spring width 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 2"

Colour Code Green Brown White Red Yellow Blue Grey n/a

Wt. (lbs.) 9.9 11.1 11.9 11.6 5.6 9.1 15.2 19.5

ITEM 2080096 2080031 2080080 2080032 2080064 2080065 2080066 8190951

PRICE (ea.) 26.99 28.99 36.99 24.99 20.99 25.99 34.99 39.99

4 PK REPLACEMENT BUSHINGS for LEAF SPRING ENDS 8212144 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99/pkg.

LEAF SPRING PADS

BRAKE DRUMS

• 3,500 lb. • 5 - bolt 8211716 – Wt. 24.5 lbs. . . . . . . . . . . . . . . . . . . . • 6,000 lb. • 6 - bolt 8212235 – Wt. 35.0 lbs. . . . . . . . . . . . . . . . . . .

7499

Axle Type 2,000 lb. 3,500 lb. 6,000 lb.

Wt. (lbs.) 0.3 0.5 0.5

ITEM 8212268 8212276 8212284

PRICE 2.49 3.49 3.99

ITEM 8008518 8008799

PRICE 36.99 39.99

8999 BRAKE SHOE KITS

BRAKES

3,500 LB ELECTRIC BRAKE ASSEMBLIES Type Wt. (lbs.) ITEM PRICE Left side electric 10.0 8212078 99 Right side electric 10.0 8212086

6,000 LB ELECTRIC BRAKE ASSEMBLIES Type Wt. (lbs.) ITEM PRICE Left side electric 15.0 8212243 99 Right side electric 15.0 8212250

Axle Type 3,500 lb. 6,000 lb.

Wt. (lbs.) 3.4 4.2

MAGNETIC KIT for 3,500 LB AXLE ELECTRIC BRAKES 8212094 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

2699

MAGNETIC KIT for 6,000 LB AXLE ELECTRIC BRAKES 8006858 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

3699

No sale is final until you’re satisfied! 338

BRAKE SPRING KIT for 3,500 LB & 6,000 LB AXLES 8212292 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

11 Truck & Trailer

7/24/08

10:53 AM

Page 339

A) BRAKE FORCE® LED TIME BASED BRAKE CONTROLLER • 2-4-6 brake systems compatible • Multi-colour LED indicator display with: - Power to the control - Green to yellow LED power indicator - Electric brake monitoring • Single adjustment wheel • Short-proof protected • Operates at any angle, even upside down 8023523 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . B) IMPULSE® DIGITAL TIME BASED BRAKE CONTROLLER • 2-4-6 brake systems compatible • Convenient digital display indicates: - % of braking power output to railer - confirmation of trailer connection - monitors short circuit hazard • Single adjustment wheel • Short-proof protected • Operates at any angle, even upside down • Quick disconnect for easy removal or transfer 8023532 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

6499

BRAKE CONTROLLERS

9499

C) AGILITY® PROPORTIONAL BRAKE CONTROL • Advanced technology inertia accelerator instantly activates brakes • Proportional controller mirrors the braking action of the tow vehicle • On-the-fly sensitivity adjustment • Easiest to use • Fully digital settings • Flexible mounting options/self leveling • Innovative vertical slide for manual braking 99 8214371 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . .

124

BRAKE CONTROL ADAPTERS

LED TRAILER BREAKAWAY KIT

LED indicators provide instant battery status

Vehicle specific connectors for quick installation of Hopkins Brake Force® and Impulse® brake controllers. FORD / MERCURY: F-150 (1994-07), F-250 / F-350 (1994-04), Expedition (1997-07)Van (full-size) (1994-98) (with tow package) (2006-07), Excursion (2000-04), Windstar (1995-03), Explorer (2002-07) Mountaineer (2004) 99 8181174 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . CHEVY, GMC, CADILLAC, HUMMER: Avalanche (2002-06), Silverado (1999-06), Sierra (1999-06), Suburban (2000-06), Tahoe (2000-06), Yukon (2000-06), Denali (2000-06), Escalade (2000-06), H2 (2000-06) 99 8181208 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . DODGE: Ram Pickup (1997-07), Dakota (1997, 2004-05), Durango (with tow package) (1998-07) 99 8181216 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

13 13

• Activates trailer brakes in the event of trailer/tow vehicle seperation. • Complete system including battery, charger, switch, cable/pin, and mounting hardware. Features LED display battery status and rustproof ABS box with locking lid. • For use on single or tandem axle trailers with electric brakes. 99 8002177 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . . . .

339

TRAILER COMPONENTS

11 Truck & Trailer

7/24/08

10:53 AM

Page 340

RUBBER BOAT TRAILER ACCESSORIES Description

Shaft

A) Keel roller

5/8" 5/8" 5/8" 1/2" C) Spool roller 5/8" 1/2" 5/8" D) Guide-on roller 1/2" E) Ribbed rocker 7/8" 4-1/4" x 3" roller 1/2" 3" F) Bow roller 1/2" 3" 5/8" 2-1/2" G) 8095143 1/2" 3" 3/8" 4" H) Bow stop 1/2" 6" 6" I) Utility bumper 5/8" B) Keel roller

Wt. (lbs.) ITEM PRICE 5" 1.8 8095036 7.99 8" 2.5 8095044 9.99 12" 4.0 8095051 13.99 4" 0.8 8095069 4.99 5" 1.0 8095077 4.99 5" 1.0 8095085 5.99 2-1/2" x 12" 2.8 8095093 9.99 2" x 9" 1.4 8095101 5.99 Size

C D

1.8 8095119 8.99 0.6 0.4 0.4 0.5 0.5 1.9 0.7

8095127 8095135 8095143 8095150 8095168 8095176 8097297

3.99 2.49 2.49 2.99 3.99 8.99 4.99

FENDERS L) SINGLE

J) SINGLE

K) SINGLE PLASTIC

N) TANDEM

M) 90º

N) SINGLE

Type Size Wheel Size Single 7.5" x 23.5" up to 12" J K Single Plastic with Skirt 6-3/4" x 20-1/2" up to 12" Single 9.0" x 31.0" up to 15" L 90° Back 9.0" x 32.0" up to 15" M Single 9.0" x 32.0" up to 15" N Tandem 9" x 72" x 20.5" up to 15" O

Wt. (lbs.) 5.6 0.9 7.2 7.7 12.0 17.3

ITEM 2080216 2080097 2080224 2080021 2080078 2080095

PRICE 15.99/ea. 17.99/ea. 21.99/ea. 21.99/ea. 25.99/ea. 40.99/ea.

ATV TUBELESS TIRES

TIRES & TIRE TOOLS

T P

P Q

R S

340

Tire Size 25 x 12.00-9 22 x 8.00-10

Tread Pattern Ply Wt. (lbs.) Aggressive 2 20.7 Aggressive 2 12.4

ITEM 2027027 8033201

PRICE 67.99 54.99

Tire Size 22 x 11.00-8 23 x 7.00-10 25 x 11.00-10 25 x 11.00-12 25 x 13.00-9

Tread Pattern Ply Wt. (lbs.) Stryker® 2 21.6 AT489 2 12.2 AT489 3 20.3 AT489 3 20.0 Field Trax 3 27.1

ITEM 2026227 8118382 8102709 8118390 8197212

PRICE 69.99 68.99 84.99 89.99 79.99

11 Truck & Trailer

7/24/08

10:53 AM

Load Range A B C D

Ply 2 4 6 8

Size 18 x 9.50-8 25 x 12.00-9

Wt. (lbs.) 2.1 2.6

ITEM PRICE 2026169 10.99 2027043 14.99

HIGH SPEED TRAILER TIRES & ASSEMBLIES

Size

Cap.

Load Range

4.80 x 4.00 x 8 590 lbs.

5.70 x 8 715 lbs.

5.30 x 12 840 lbs.

16.5 x 6.5-8

620 lbs.

18.5 x 8.50-8 770 lbs. 20.5 x 8.00-10 1,105 lbs.

B B C

Wt. (lbs.) 9.7 9.0 5.6 12.0 13.5 7.6 20.4 20.5 9.3 14.4 14.5 11.3 20.1 20.0 26.0 28.6

Rim 4-hole 5-hole Tire Only 4-hole 5-hole Tire Only 4-hole 5-hole Tire Only 4-hole 5-hole Tire Only 4-hole 5-hole 4-hole 5-hole

ITEM

PRICE

2026755 2026888 2020576 2026763 2026896 2020584 2026771 2020964 2026805 8227175 8227183 8227167 8227191 8227209 8227217 8227225

39.99 39.99 21.99 54.99 54.99 34.99 75.99 75.99 49.99 59.99 59.99 39.99 74.99 74.99 97.99 97.99

TIRES & TIRE TOOLS

ATV TIRE TUBES

TECH TIPS... Princess Auto carries a wide variety of trailer tires ranging from 8" all the way up to 16" sizes.

Page 341

RADIAL TRAILER TIRE ASSEMBLIES

High performance radials designed for towing. A) ST 175/80 R13 • Load range: C • Max. load of 1,360 lbs. @ 50 PSI • Tire mounted on 13" 5-hole rim Wt. 30.0 lbs.

2020017 – 5-HOLE WHITE RIM . . . . . . . . . . .

A) ST235/85R16 • 6-bolt pattern • Load range D • For use with 6,000 lb. axle assemblies 99 • Tire mounted on 16" 6-hole rim 99 99 8179731 – Wt. 66.4 lbs. . . . . . . . . . . . . B) ST 145/R12 • Low profile • Load range: D • Max. load of 1,220 lbs. @ 65 PSI • Mounted on a 12 x 4.5 x 5 bolt supreme mod wheel

139 144

8128308 – 5-HOLE GALVANIZED RIM . . . . . . A) ST 205/75 R14 • Load range: C • Recommended for use with 3,500 lb. axles • Max. load of 1,760 lbs. @ 50 PSI • Tire mounted on a 14" 5-hole rim Wt. 40.4 lbs. 2020081 – WHITE RIM . . . . . . . . . . . . . . . . . .

15999 99 8128316 – GALVANIZED RIM . . . . . . . . . . . . . 164

219

Wt. 25.0 lbs. 2020143 – WHITE RIM . . . . . . . . . . . . . . . . .

11999 99 8128324 – GALVANIZED RIM . . . . . . . . . . . . . 124

341

TIRES & TIRE TOOLS

11 Truck & Trailer

7/24/08

10:53 AM

Page 342

TRAILER RIMS B

A A B C D

Rim Size 8x7 8x7 13 x 4.5 13 x 4.5 14 x 5.5 15 x 6.0 8 x 3.75 12 x 4 16 x 6

Hub Size Bolt Circle 4-hole 4.00 5-hole 4.50 4-hole 4.00 5-hole 4.50 5-hole 4.50 5-hole 4.50 4-hole 4.00 4-hole 4.00 6 hole 5.50

Cap. 900 lbs. 900 lbs. 1,100 lbs. 1,360 lbs. 1,870 lbs. 2,150 lbs. 590 lbs. 1,045 lbs. 3,000 lbs.

SMALL TIRE TUBES

Style Wt. (lbs.) Standard 5.0 Standard 6.2 Spoked 13.2 Spoked 13.0 Spoked 18.1 Spoked 20.1 Standard 3.7 Spoked 10.1 Spoked 26.5

ITEM 2020101 2024925 2020018 2020019 2020083 8114522 2023232 2026912 2020114

PRICE 24.99 24.99 38.99 38.99 47.99 53.99 14.99 25.99 64.99

FLANGE BEARINGS

• 2 per package • Can be used as replacement bearings for many of our small tire assemblies • Easy to install and remove Size 2.80/2.50 x 4 4.10/3.50 x 4 4.00 x 8 5.30/4.50 x 6 4.00 x 6 5.70 x 8

Wt. (lbs.) 0.3 0.5 0.9 0.8 0.6 1.2 E

ITEM PRICE 2026862 3.49 2024263 4.49 2024248 4.99 2020004 5.49 2024255 4.49 2024230 7.49 F

Bore 3/8" 1/2" 5/8" 3/4" 1"

O.D. Wt. (lbs.) 1-1/8" 0.2 1-3/8" 0.2 1-3/8" 0.2 1-3/8" 0.2 2" 0.5

TURF & GARDEN TIRES

ITEM 8066946 8066953 8066912 8066920 8066938

PRICE 1.99/pk. 2.99/pk. 2.99/pk. 2.99/pk. 3.99/pk.

NOT FOR HIGHWAY USE

Load Ply Rating Style PSI Rating (lbs.) 440 Tubeless 14 E 16 x 6.50-8 2 815 Tubeless 22 F 18 x 8.50-8 4 Size

Wt. (lbs.) ITEM PRICE 5.1 2021558 29.99 11.8 2021590 49.99

TURF TIRE TUBES 13 x 5.00-6 8005297 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 x 6.00-6 8005298 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LOW PROFILE PNEUMATIC TIRE

WHEEL BARROW WHEEL

342

549 599

2-PLY 4.80/4.00 x 8 TUBE TYPE TIRE • 35 PSI; load rating: 300 lbs. • Mounted on an all-metal pressed steel wheel • Roller bearings with 3/4" bore 99 /ea. 2020062 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . TIRE ONLY 99 /ea. 2024685 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . .

24 11

• 6" x 2" • 5/8" bore ball bearing • 300 lb. cap. 8064768 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . .

1599

11 Truck & Trailer

7/24/08

10:53 AM

Page 343

Tire mounted on wheel with 3/4" bore. Size 13/5.00 x 6 16/6.50 x 8 Size 15/6.00 x 6 18/8.50 x 8

Ply Rating 4 2

Load Rating 370 lbs. 550 lbs.

Max. PSI 30 35

Wt. (lbs.) 6.5 4.8

Ply Rating 2 2

Load Rating 345 lbs. 515 lbs.

PSI

Wt. (lbs.) 9.1 17.0

14 10

ITEM 2021806 8043789 ITEM 2021814 2021822

PRICE (ea.) 32.99 49.99 PRICE (ea.) 39.99 74.99

SMALL TIRE & WHEEL ASSEMBLIES A Tire Size 2.80/2.50-4 4.10/3.50-4 A 4.10/3.50-5 5.30/4.50-6 * B 4.10/3.50-4

Ply 2 4 4 – 2

• Ball bearings • Ideal for shop carts, dollies, etc. • FOR LOW SPEED APPLICATIONS ONLY * Carlisle product O’all. Bore Load Wt. PRICE Style Ht. Rating (lbs.) ITEM (ea.) Tube Type 9" 5/8" 220 lbs. 3.5 2020059 13.99 Tube Type 10-1/2" 5/8" 300 lbs. 2.7 2020107 14.99 Tube Type 11" 3/4" 330 lbs. 5.0 2020061 21.99 Tubeless 14" 3/4" 560 lbs. 7.8 2027134 39.99 Tube Type 10" 5/8" 300 lbs. 3.5 2020060 15.99 B

Rim # of Pcs 2 1 (plastic) 2 1 2

TIRES & TIRE TOOLS

TURF TIRE ASSEMBLIES

SMALL WHEELS • Diamond rubber tread with plastic hub • Great replacement for push mowers, BBQs, etc. Size Bore Wt. (lbs.) 6" x 1-1/2" 1/2" 0.9 7" x 1-1/2" 1/2" 1.2 8" x 1-3/4" 1/2" 1.7

ITEM 8039943 8039976 8005916

PRICE 3.49 3.99 5.99

SPEED WHEELS C) LIGHT DUTY Load Size Cap. 6" x 1-1/2" 60 lbs. 7" x 1-1/2" 60 lbs. 8" x 2" 100 lbs. 10" x 2-1/2" 140 lbs. 13" x 2-1/2" 240 lbs.

Wt. Bore (lbs.) ITEM PRICE 1/2" 1/2" 1/2" 1/2" 5/8"

1.8 3.0 4.3 8.8 10.5

2026201 2021368 2020295 2020088 2020090

5.99 6.49 7.99 13.99 19.99

D) MEDIUM DUTY Load Bore Wt. Size Cap. (lbs.) ITEM PRICE 8" x 2-1/2" 175 lbs. 5/8" 5.9 8139644 12.99 10" x 2-3/4" 200 lbs. 5/8" 8.8 8139651 15.99

E) HEAVY DUTY – Poly flex hub. Load Bore Wt. Size Cap. (lbs.) ITEM PRICE 8" x 2-1/2" 250 lbs. 3/4" 4.3 2020091 14.99 10" x 2-3/4" 300 lbs. 3/4" 8.6 2020092 16.99

HEAVY DUTY TRUCK MUD FLAPS • Fitted with dual red reflectors • For use with dual-wheel vehicles and trailers Size Wt. (lbs.) ITEM 18"H x 18"W 11.6 8001833

PRICE 13.99

SPARE TIRE CARRIER EASY TO INSTALL

• Universal spare tire carrier mounts spare to trailer tongue or frame • Fits 8", 9", 12", 13", 14" and 15" wheels with 4 or 5 hole rims • Zinc plated 8007005 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

599

343

TIRES & TIRE TOOLS

11 Truck & Trailer

7/24/08

10:53 AM

SPARE TIRE CARRIER

Page 344

4 PC TIRE STORAGE TOTES

• Easy to install • Fits all trailer tongues up to 3" wide • Fits 4- or 5-hole rims 8112575 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . . . . .

SPARE TIRE COVERS

• Adjust to fit 22" to 31" tires • Heavy polyester 99 construction • Each tote includes velcro pocket for storage of wheel bolts, coded label for easy identification and carry handle • Ideal for summer or winter tire storage 99 8195711 – Wt. 3.4 lbs. . . . . . . . . . . . . . . . . . . .

SPARE TIRE BRACKET

• Water repellent PVC construction • Maximum protection from UV exposure and moisture • Corded edge with elastic closure for easy installation and secure fit Size Wt. (lbs.) ITEM PRICE 28" x 8" 1.6 8179517 12.99 29" x 9" 1.5 8179525 13.99 30" x 11" 1.8 8179533 14.99 31" x 11" 1.9 8179541 15.99

• Works on all sizes of tires and rim combinations • Ideal for enclosed trailers and open construction type trailers with short rack • Zinc plated 99 8051880 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . .

TIRE GAUGES

B) DUAL CHUCK TIRE GAUGE • Metal body with zinc alloy head • 4-sided plastic bar measures 10 to 120 PSI, and 100 to 800 kPa 99 8158826 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . C) DIAL TIRE GAUGE • Zinc alloy body with acrylic lens • Measures: 20 to 100 PSI and 1 to 7 kg/cm2 • Pressure lock needle and release button 99 8158883 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . D) DUAL CHUCK EXTENSION TIRE GAUGE • Chrome plated brass body with zinc cap head • 2-sided plastic bar measures 10 to 150 PSI 99 ¢ 8158859 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . E) DIGITAL TIRE GAUGE • Pressure range: 0 to 150 PSI, 0 to 10 bar • Digital LED reading selects PSI or bar 99 99 • Automatic shut-off 8077380 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

A) POCKET PENCIL TIRE GAUGES Metal body with chrome plated plastic head. 2-SIDED PLASTIC BAR Measures 10 to 50 PSI. 8168759 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 4-SIDED PLASTIC BAR Measures 20 to 120 PSI, 150 to 800 kPa, and 1.5 to 8.0 bar. 8158875 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

TIRE GAUGES F

G F) TIRE GAUGE • For bicycles, RVs, and trucks • 2 sides: 20 to 120 PSI in 2 lb. increments and 120 to 820 kPa in 20 kPa increments 99 4252235 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . F) TRACTOR TIRE GAUGE • For use on air/water filled tires • 2 sides: 5 to 50 lbs. in 1 lb. increments and 40 to 350 kPa in 19 kPa increments 99 4271995 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

344

G) REGULAR EXTENSION SERVICE GAUGE • Dual head chuck • 2 sides: 10 to 160 lbs. in 2 lb. units and 80 to 1,100 kPa in 20 kPa units • Red marker 4272381 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

1999

11 Truck & Trailer

7/24/08

10:53 AM

Page 345

TIRES & TIRE TOOLS

LUG WRENCHES A) FOLD-DOWN LUG WRENCH • Sizes: 11/16", 3/4", 13/16", and 7/8" • Heavy duty, corrosion resistant • Folds down to save space 4272282 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) 20" LUG WRENCH • Sizes: 11/16", 3/4", 13/16", and 7/8" • Rugged forged steel for service shop, or auto 4272514 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 25" TRUCK LUG WRENCH Sizes: 7/8", 15/16", 1", and 1-1/16". 4272589 – Wt. 6.1 lbs. . . . . . . . . . . . . . . . . . . . .

1199 999 B

TIRE CHANGING EQUIPMENT C

C) PORTABLE MINI TIRE CHANGER • For tires from 4" to 12" diameter • Ideal for hand cart, go cart, small trailer and tractor tires etc. • Includes two bead breaker bars, 21" mount/demount tool, aluminum centering cone and 2 nylon spacers 99 8157364 – Wt. 13.8 lbs. . . . . . . . . . . . . . . . . . . D) TIRE CHANGER • For tires from 8" to 16" diameter • Ideal for trailer tires, lawn tractor tires etc. • Will handle 12.5" X 16" floatation tires 99 2050002 – Wt. 35.4 lbs. E) MOTORCYCLE TIRE CHANGING ATTACHMENT • For rims up to 22" diameter • Ideal for motorcycles, ATV's, golf carts etc. • For use only with above changer 2050002 sold separately 99 8155236 – Wt. 35.3 lbs. . . . . . . . . . . . . . . . . . .

49 64

4 PC TIRE VALVE TOOL SET

WHEEL WEIGHT TOOL

• Includes tools to insert and remove cores, • High carbon tool steel with heat treated black tap inner stem and chase outside threads finish • Chrome moly steel with heat treatment and • Hammer head with plastic protector chrome plating 99 8159675 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . 8103491 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

TIRE VALVE EXTENSIONS

TIRE CRAYON

Non-toxic white crayon for tire repairs and identification. 8107724 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

1299

299

• 5 pc. metal extensions • Length: 1.5" 8006247 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . .

499/pkg.

345

TIRES & TIRE TOOLS

11 Truck & Trailer

7/24/08

10:53 AM

TIRE VALVE CAPS A

Page 346

5 PK VALVE CORE REPLACEMENTS C

• Temperature resistant • Working pressure: 0 to 212 PSI • Working temp.: -54°C to 150°C 8006244 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

299/pkg.

4 PK TUBELESS SNAP-IN TIRE VALVES

A) 5 PK PLASTIC VALVE CAP ¢ /pkg. 2020130 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . B) 5 PK HEX HEAD CHROME PLATED CAPS ¢ /pkg. 2020128 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . C) 5 PK SCREWDRIVER TYPE VALVE CAP Nickel plated. 19 /pkg. 2020127 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . D) 4 PIECE TIRE VALVE CAPS 49 /pkg. 8107849 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . E) VALVE CAPS WITH CHROME SLEEVES 79 /pkg. 8107914 – Wt. 0.1 lbs. . . . . . . . . . . . . . . .

69 99

For use up to 65 PSI working pressure. Trade # Rim Effective Wt. ITEM PRICE hole dia. length (lbs.) /pkg. TR 414 0.45" 1-1/2" 0.1 8005823 3.69 TR 415 5/8" 1-1/4" 0.1 8006233 3.99 TR 413* 0.45" 1-1/4" 0.1 8006235 3.59 *Chrome

1 1 1

TIRE TOOLS

F) 4-IN-1 TOOL • Repairs cap and core threads • “Easy-Out” feature for removing damaged cores and screwdriver for removing standard cores 99 4270168 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . G) VALVE FISHING TOOL • Handle has valve core driver and deflating pin • Designed for working valve through rim hole 99 2020125 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . H) VALVE INSERTION TOOL For removing and inserting all sizes of snap-in type tubeless tire valves. 99 2020126 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

1 1 3

I) TIRE VALVE CORE TOOL • Install and remove standard valve cores • 5" long 99 /pr. 2020029 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . J) TIRE TREAD DEPTH GAUGE Dual gauge SAE and metric measures in increments of 1/32" or 1 mm. 99 8107740 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

PATCH KITS L K

5/16" dia. stem. 8107708 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399 799 899 899

TIRE STITCHER

TIRE PLUG and PATCH KIT

346

K) 24 PC PATCHES 2" x 1-1/4" plus tube of rubber cement. 2021418 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . L) 30 ROUND PATCHES – 2" DIA 2021384 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . L) 20 ROUND PATCHES – 3" DIA 2021392 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . M) 50 STRIP PATCHES 1/4" x 2-1/4" plus 12 g of rubber cement. 2020036 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

For rolling out air bubbles/creases in new tire patches. 8006257 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

11 Truck & Trailer

7/24/08

10:53 AM

Page 347

TIRES & TIRE TOOLS

TIRE CEMENT Rubber cement for use with applying tire patches and plugs. A) 1 OZ TUBE 8198293 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . B) 8 OZ CAN 8198285 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

1 699 TIRE SERVICE KIT

PISTOL GRIP TIRE REPAIR KIT

Includes split eye tool, rasp tool, cement and plugs. 8107922 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

36 pc. tool kit for plugging tires, maintaining tire valves, 99 and performing general tube repairs. 8107682 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . .

1999

TIRE REPAIR KITS C) TUBELESS TIRE STRIP PATCH KIT • Ten 1/4" x 2-1/4" strip patches • Open eye needle • 12 ml tube rubber cement 99 2020261 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . D) TUBELESS TIRE REPAIR CORD KIT • Twelve 6" repair cords • 6-1/4" needle 99 2020253 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . THIRTY 6" REPAIR CORDS 2020035 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.99 E) RADIAL TIRE REPAIR KIT Includes split eye tool, rasp tool, hand knife, 5 pc. soft strings, 3 pc. hard strings, and tube of cement. 99 2020626 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C D

WHEEL CHOCKS I H G

F) WHEEL CHOCKS 2 pc moulded wheel chock with 3 ft. rope. 99 8096760 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . G) HEAVY DUTY WHEEL CHOCKS • 2 pc welded steel • Teeth on bottom edge for better grip • Highly visible yellow colour • Adds security when changing a tire or parking on uneven terrain • 6" x 6-1/2" 99 /pr. 2020171 – Wt. 5.5 lbs. . . . . . . . . . . . . . . . . . . H)WHEEL CHOCKS • 2 pc rubber with ribbed surface for better grip • 8" x 6" x 4" 99 /pr. 8095879 – Wt. 9.4 lbs. . . . . . . . . . . . . . . . . . . I) HEAVY DUTY WHEEL CHOCK • heavy duty rubber with ribbed surface for better grip • Includes eye bolt for pull rope • 10" x 8" x 6" 99 /ea. 8095887 – Wt. 8.8 lbs. . . . . . . . . . . . . . . . . .

21 24

J) RUBBER WHEEL CHOCK • Reinforced rubber design • Resistant to sun, salt, oil and acid • Prevents accidental movement • 5" x 6" x 5" 99 8192114 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . K) COMPOSITE WHEEL CHOCKS • 100% recycled composite • Safety yellow • Resistant to oils and chemicals • Will not deteriorate or rot • Connected with 32-3/4" rope • Each chock measures 9-1/2" long, 6" wide, 4" tall 99 8173791 – Wt. 11.9 lbs. . . . . . . . . . . . . . . . . . .

347

TIRES & TIRE TOOLS

11 Truck & Trailer

7/24/08

10:53 AM

Page 348

WEST COAST MIRRORS A) WEST COAST MIRROR • Aluminum body • 6" x 16" 99 8119620 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) HEATED WEST COAST MIRROR with LIGHT • Stainless steel body with dual bulb marker light • Built in 40 watt heater melts away ice on mirror surface • 12VDC operation • 7" X 16" 99 8119612 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B A

CONVEX MIRRORS • Stainless steel body • “L” bracket included 6" DIA 8119638 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1/2" DIA 8119646 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

899 1199

JACKS

C) 1,200 LB DUAL WHEEL SWIVEL JACK • Swivels to horizontal position for transport • Retracted length: 26" • Extended length: 39" • 6" dual casters • Mounting plate: 5-1/2" x 6-1/2" 1070022 – Wt. 18.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 500 LB PNEUMATIC SWING BACK JACK • Swivels to horizontal position for transport • 10" pneumatic tire • Retracted length: 17" • 10" lift 8007019 – Wt. 19.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999

6299

1,000 LB CAPACITY FOOT JACK • Topwind jack with foot plate • Fold away handle • Swivels to horizontal position for transport • 10" lift 8004520 – Wt. 15.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,000 LB CAPACITY TRAILER JACK

A-FRAME JACKS

348

4499

• 3-hole mounting plate • Jack fits into a 2-1/4" dia. opening in the A-frame • Welded positive stop • High capacity sealed thrust bearing and extra long handle for easy cranking • 15" travel • O’all height: 8" retracted, 23" extended 2,250 LB CAP 8003557 – Wt. 13.3 lbs. . . . . . . . . . . . . . . . . . 5,000 LB CAP 8002260 – Wt. 14.0 lbs. . . . . . . . . . . . . . . . . .

3999 4999

• Mounts to side of trailer tongue • Designed for semi-permanent or permanent attachments • Heavy duty worm gear drive with built-in gear box • 24" lift • Wheel: 5-5/8" dia. x 1-3/4"w 1070020 – Wt. 16.2 lbs. . . . . . . . . . . . . . . . . .

3999

11 Truck & Trailer

7/24/08

10:53 AM

Page 349

A) 10" LIFT • Galvanized for rust protection • Bolt-on mount type • Heavy duty yoke • 8" wheel dia. 99 8153637 – Wt. 18.8 lbs. . . . . . . . . . . . . . . . . B) 27" LIFT • Steel construction with completely galvanized finish • 8" dia. x 4" wide MAG style spoked wheel for strength and support • Easy swing operation with dual lock pins for added strength and support • Provides up to 27" of lift & 14" of travel • Fits on trailer tongues up to 3" x 5" • All galvanized hardware included • Grease fitting helps keep gears and shaft well lubed for continuously smooth “like-new” performance • Smooth turning ergonomic handle for maximum comfort 99 8153652 – Wt. 23.9 lbs. . . . . . . . . . . . . . . . .

TRAILER JACKS

1,500 LB MARINE SWIVEL JACKS

2,000 LB CAPACITY MECHANICAL IMPLEMENT JACKS E D C

• Topwind features high capacity sealed thrust bearings • Easy cranking, 8 turns per inch • Heavy duty inner screw for greater sideloads C D E

Lift Retracted Height Extended Height Load cap. (lbs.) Wt. (lbs.) 10" 12-3/4" 23" 2,000 12.6 10" 11-1/4" 21-1/4" 2,000 12.7 15" 14-7/8" 29-7/8" 2,000 14.8 15" 14-7/8" 29-7/8" 2,000 16.5

ITEM 8004522 8004523 8004524 8004689

PRICE 32.99 29.99 42.99 46.99

VALOR HOWELL Date of birth: September 7, 2000 Hair: Brown Eyes: Brown Missing since: Dec 1, 2004 Missing from: Grand Forks, B.C. HAVE YOU SEEN THIS CHILD?

1-800-387-7962 A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

All Calls Confidential—No Name Required

349

10:53 AM

Page 350

5,000 LB CAPACITY MECHANICAL IMPLEMENT JACKS

TOPWIND A

• Zinc chromate finish on inner tube, powder coat finish on outer tube • Topwind features high capacity sealed thrust bearings • Sidewind features zerk fitting for easy maintenance • Large 6" x 8" foot plate for greater stability FLANGE MOUNT – Spring-release catch holds jack in vertical or horizontal position. RING MOUNT – Locked in position with easy to remove pin.

SIDEWIND C

Extended Wt. Lift Retracted Height* Height* (lbs.) ITEM PRICE

10" 15" 10" B) Ring 15" C) Ring 10" D) Flange 15" A) Flange

11-7/8" 14-7/8" 11-7/8" 14-7/8" 11-7/8" 14-7/8"

21-7/8" 29-7/8" 21-7/8" 29-7/8" 21-7/8" 29-7/8"

15.0 18.2 12.1 16.8 14.3 19.4

1050244 1050269 1050251 8051013 8004687 1050400

44.99 49.99 44.99 49.99 42.99 52.99

HEIGHT

Mount

HEIGHT

7/24/08

HEIGHT

TRAILER JAKCS

11 Truck & Trailer

*Measured from centre of mounting plate to ground.

5,000 LB CAPACITY SQUARE TUBE JACKS with DROP LEG • Heat treated cast gears • Smooth powerful cranking mechanism for heavy loads • 17" lift • 12" drop leg adjustment • 29" total travel E) TOPWIND DROP LEG JACK 8055055 – Wt. 22.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F) SIDEWIND JACK 8055139 – Wt. 22.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7,000 LB CAPACITY JACKS

64 7299 12,000 LB CAPACITY DROP LEG JACK

G H

• Heavy 2-3/4" outer wall • 6" x 8" foot plate • Zinc plated inner leg and drop tube • O’all height: 23" retracted, 51-1/2" extended G) TOPWIND JACK • 13" drop leg adjustment, 15" screw travel • 28" total height adjustment 99 1050035 – Wt. 22.9 lbs. . . . . . . . . . . . . . . . . . . . H) SIDEWIND JACK • 13-1/2" drop leg adjustment, 15" screw travel • 28-1/2" total height adjustment 99 8002257 – Wt. 27.2 lbs. . . . . . . . . . . . . . . . . . . .

350

• Drop leg can be adjusted up and down with locking pin • 4" heavy wall outer tubing • Self lubricating thrust bearing for efficient lifting • Precision cast gears • Drop travel: 10" • Screw travel: 12-1/2" • Total travel: 22-1/2" • O’all height: 25" ret.; 47-1/2" ext. 8002256 – Wt. 65.2 lbs. . . . . . . . . . . . . . . . .

17999

11 Truck & Trailer

7/24/08

10:53 AM

CLASS III MULTI-FIT HITCH

CLASS II MULTI-FIT HITCH

• 350 lb. max. gross tongue weight • 3,500 lb. max. gross trailer weight • Applications include: Chevy/GMC, Dodge, Ford, Nissan, and Toyota pickups and minivans (please call our National Call Centre at 1-800665-8685 or visit your local Princess Auto for a specific fit guide) 99 8193690 – Wt. 31.6 lbs. . . . . . . . . . . . . . . . .

• 500 lb. max. gross tongue weight • 5,000 lb. max. gross trailer weight • Applications include : Chevrolet trucks and minivans, Ford pickups, Dodge trucks, GMC pickups and SUVs and Toyota Trucks (please call our National Call Centre at 1-800665-8685 or visit your local Princess Auto for a specific fit guide) 99 8161606 – Wt. 43.5 lbs. . . . . . . . . . . . . . . . .

149

COUPLERS & HITCHES

Page 351

129

TECH TIPS

CLASS IV MULTI-FIT HITCH

• Hide away design • 750 lb. max. gross weight • 7,500 lb. max. gross trailer weight • Applications include: Chevy/GMC, Dodge, Ford, and Toyota pickups (please call our National Call Centre at 1-800-665-8685 or visit your local Princess Auto for a specific fit guide) 99 8047605 – Wt. 52.5 lbs. . . . . . . . . . . . . . . . .

Trailer size is restricted to the following maximum, except where farm implements are concerned: width 26 m (8 ft. 6"), height 4.15m (13 ft. 6"), length 12.5m (41 ft.) Brakes are required for trailers having a GVW of more than 2,000 lbs. All trailers must have either splash guards or fenders when travelling on the highway.

149

Year

Vehicle Chevrolet Pickup, C/K Series w/8 ft. bed, 2 dr. regular and extended cab Chevrolet Pickup, C/K Series w/8 ft. bed, 4 dr. crew 1992-00 cab Chevrolet Pickup, Silverado, 1999-06 all 1500 Series and 2500 LD, 2 and 4 wd. 1971-93 Dodge Pickup, D/W Series, full size 1994-01 Dodge Pickup, Ram, full size 2002 Dodge Pickup, Ram, full size 2500/3500 only 1973-79 Ford F-100, F-150, F-250, F-350 Ford F-100, F-150, F-250, F-350 all, inc. Supercab, 1980-86 will not fit custom fascia Ford F-100, F-150, F-250, F-350 1987-96 Styleside/Flareside, all models inc. Supercab 1997-05 Ford F-150 and F-250 Light Duty Styleside Ford F-150 Heritage Flareside and Heritage Styleside 2004 (old body style) 1997-05 Ford F-150 Light Duty Flareside 2000-03 Ford F-150 SuperCrew 1997 Ford F-250 and F-350 Heavy Duty Ford F-250 and F-350 Super Duty Pickups only 1999-04 Will not fit Cab and Chassis GMC Pickup, C/K Series w/6 ft. and 8 ft. bed, 1988-00 2 dr. regular and extended cab, inc. Sportside fenders 1992-00 GMC Pickup, C/K Series w/8 ft. bed, 4 dr. Crew Cab GMC Pickup, Sierra, all 1500 Series and 2500 LD, 1999-06 2 and 4 WD 2000-06 Toyota Tundra 1988-00

CLASS III (MODEL #37096) • Gross trailer weight: 5,000 lbs. max. • Tongue weight: 500 lbs. max. • 7,500 lb. gross trailer weight and 750 lb. tongue weight can be achieved by using a weight distributing hitch • For use with small to mid-size trailers • Accepts 2" square ball mount 99 8164758 – Wt. 69.6 lbs. . . . . . . . . . CLASS III/IV (MODEL #37094) • Gross trailer weight: 7,000 lbs. • Tongue weight: 600 lbs. • 12,000 lb. gross trailer weight and 1,200 lb. tongue weight can be achieved by using a weight distributing hitch • Accepts 2" square ball mount 99 4200028 – Wt. 59.5 lbs. . . . . . . . .

174

219

351

COUPLERS & HITCHES

11 Truck & Trailer

7/24/08

10:53 AM

HITCH TUBES

TECH TIP Stay within safe vehicle towing capacity listed in your owners manual. Installed hitches may have a higher maximum capacity than the vehicle they are mounted to was designed to pull.

HITCH ADAPTERS/EXTENDERS

• Black enamel coating • 5/8" pinhole Size Wt. (lbs.) 2" x 6-1/2" 4.2 2" x 8-3/8" 5.3 2" x 10-1/4" 6.4 2" x 12" 7.5

ITEM 8157240 8157265 8157299 8157307

PRICE 14.99 16.99 18.99 20.99

CLASS II STEP & BUMPER HITCH A

Steel with black enamel finish. A) 2" to 1-1/4" TRAILER HITCH RECEIVER REDUCER Reduces any 2" receiver to 1-1/4" receiver. 99 8159683 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . . . . . B) 1-1/4" to 2" TRAILER HITCH RECEIVER ADAPTER • Converts any 1-1/4" receiver to a 2" receiver for accessory use • NOT TO BE USED FOR TOWING 99 8159691 – Wt. 8.3 lbs. . . . . . . . . . . . . . . . . . . . C) 2" RECEIVER EXTENDER • Extends 2" receiver by 14" for additional clearance beyond the bumper • Prevent vehicle/trailer collisions during turns • REDUCES HITCH RATED TOWING CAPACITY BY 50% 99 8159709 – Wt. 11.8 lbs. . . . . . . . . . . . . . . . . . .

• 3 positions adjust from 6-1/4" rise to 7-1/2" drop • 5000 lb. maximum gross trailer weight capacity • 500 lb. maximum tongue weight capacity 8210056 – Wt. 14.1 lbs. . . . . . . . . . . . . . . . .

• 500 lb. max. gross tongue weight • 5,000 lb. max. gross trailer weight • Accepts 2" square ball mount • Bolts to step bumper 8004694 – Wt. 14.3 lbs. . . . . . . . . . . . . . . . . . . .

4699

TRAILER HITCH COVERS • Stay-on design with set screws • Sturdy ABS construction • Fits class III / IV hitches Wt. 0.6 lbs.

299 99 ............... 3

8104218 – BLACK FINISH . . . . . . . . . . . . . . . . . . 8104226 – CHROME FINISH

TRAILER SWAY CONTROL BAR

3-POSITION ADJUSTABLE BALL MOUNT

4999

• Reduces the lateral movements of the trailer • Includes: sway control unit, trailer-mounted ball and hardware, weld-on tab, hitch-mounted ball and attachment clips 99 8007029 – Wt. 14.9 lbs.. . . . . . . . . . . . . . . . . . . .

1-1/4" x 5/8" x 1-1/4" REPLACEMENT SWAY CONTROL BALL

DUAL RECEIVER HITCH EXTENSION

352

Page 352

• 4,000 lb cap. • Two 2" receivers, lower tube with collar for towing and upper tube for accessories • 17-1/2" long overall 99 8180135 – Wt. 18.3 lbs. . . . . . . . . . . . . . . . .

Replacement ball for trailer sway control unit. 8190126 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

11 Truck & Trailer

7/24/08

10:53 AM

Page 353

C • 2" x 2" bar with 1" ball hole • Ball mount can be reversed for lift • Gross trailer weight: 5,000 lbs. • Tongue weight: 500 lbs.

B A

CHROME FINISH A) STRAIGHT BALL MOUNT Drop Total Rise Wt. (lbs.) • 1-1/4" x 1-1/4" solid bar with 3/4" ball hole 2" 3/4" 6.5 • Total rise 3/4", total drop 1-1/4" 99 3-1/4" 2" 6.5 8002960 – Wt. 5.2 lbs. . . . . . . . . . . . . . . . . . . . . B) 4" BALL MOUNT BLACK FINISH • 3/4" x 2-1/2" with 3/4" ball hole Drop Rise Wt. (lbs.) • Total rise 4", total drop 4" 99 2" 3/4" 6.6 8002965 – Wt. 6.8 lbs. . . . . . . . . . . . . . . . . . . . . 3-1/4" 2" 7.4 C) 3-1/2" DROP BALL MOUNT 6" 4-3/4" 9.2 • 1-1/4" x 1-1/4" bar with 3/4" ball hole 8" 6-3/4" 15.4 • Total rise 3", total drop 3-1/2" 99 10" 8-3/4" 16.7 8002962 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . .

17 16 19

ITEM 8049499 8049505

PRICE 27.99 32.99

COUPLERS & HITCHES

CLASS III BALL MOUNTS

CLASS II BALL MOUNTS

ITEM PRICE 8049328 24.99 8049346 25.99 8049364 27.99 8187452 36.99 8187460 39.99

CLASS V BALL MOUNTS • Drop forged steel with black enamel finish • 2" x 2" solid bar with 5/8" dia. hitch pin hole for 2" square receiver • For 2-5/16" dia. x 1-1/4" bolt size trailer ball • Tongue weight: 1,200 lbs. Style Drop Length Rise Straight 2" 8-1/2" 3/4" 4" Ball 4" 8-1/2" 2-3/4" 6" Ball 6" 9-1/2" 4-3/4"

GTW 12,000 12,000 12,000

CLASS III/IV BALL MOUNTS

Wt. (lbs.) 12.7 13.3 15.7

ITEM 8159717 8159733 8159766

PRICE 34.99 36.99 39.99

TRAILER HITCH CLASS RATINGS Class I - Trailer hitch with capacity of up to 2000 lbs. gross trailer weight and 200 lbs. tongue weight.

• 2" x 2" bar with 1" ball hole • Ball mount can be reversed for lift • Gross trailer weight: 6,000 lbs. • Tongue weight: 600 lbs. Total Drop Total Rise Wt. (lbs.) ITEM PRICE 2" 3/4" 6.1 4205225 29.99 3-1/4" 2" 6.7 4205035 33.99 5-1/4" 4" 8.0 4205043 38.99

INTERLOCK BALL MOUNTS

Class II - Trailer hitch with capacity of up to 3500 lbs. gross trailer weight and 350 lbs. tongue weight. Class III - Trailer hitch with capacity of up to 5000 lbs. gross trailer weight and 500 lbs. tongue weight. Class 4 - Trailer hitch with capacity of up to 10000 lbs. gross trailer weight and 1000-1200 lbs. tongue weight. Class 5 - Trailer hitch with capacity greater than 10,000 lbs. gross trailer weight and more than 1200 lbs. tongue weight.

INTERLOCK TRAILER BALLS • Hex shape on hitch ball • Featuring one wrench and ball mount interlock interlock tightening system for a strong hold • Fits 2" receiver • Fits REESE TOWPOWER™ • Maximum trailer weight: 6000 lbs. ball mounts 8210114, 8210122, 8210130 • Maximum tongue weight: 600 lbs. • Class III/IV Wt. Ball Shank Length (lbs.) ITEM PRICE Total Drop Total Rise Wt. (lbs.) ITEM PRICE 2.5 8210155 8.99 1-7/8 1 2 2" 3/4" 5.7 8210114 29.99 2.7 8210163 8.99 2 1 2 3-1/4" 2" 6.6 8210122 33.99 3.4 8210171 9.99 2-5/16 1 2 5-1/4" 4" 8.2 8210130 38.99

353

COUPLERS & HITCHES

11 Truck & Trailer

7/24/08

10:53 AM

TOWING KIT

Page 354

ROTATING HITCH ASSEMBLIES B

A • Convenient carry case provides storage and helps prevent theft of ball mount • Class III/IV 6000 lbs. Includes 5/8" pin and clip and 2" chrome trailer ball • Mount is 8-1/2" long with 2" drop 99 8169732 – Wt. 11.4 lbs. . . . . . . . . . . . . . . . . . .

3 BALL HITCH with HOOK

• Rotate assembly to the size of ball you need • Fits 2" receivers • Steel with chrome plating A) 2 BALL • 2,000 lb. and 5,000 lb. cap. • 1-7/8" or 2" 99 8114936 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . . . . B) 3 BALL • 2,000 lb., 5,000 lb. and 7,500 lb. cap. • 1-7/8", 2" or 2-5/16" 99 8114944 – Wt. 9.3 lbs. . . . . . . . . . . . . . . . . . . . .

48 56

ADJUSTABLE TRI-BALL MOUNT 2" square steel tube, ball, and hook with chrome plating. Gross Trailer Weight Gross Tongue Weight 1-7/8" Ball: 2,000 lbs. 200 lbs. 2" Ball: 5,000 lbs. 500 lbs. 2-5/16" Ball: 7,500 lbs. 750 lbs. Hook: 7,500 lbs. 750 lbs.

• Solid steel shank with black enamel and chrome plating • 12" vertical adjustment 8182222 – Wt. 11.1 lbs. . . . . . . . . . . . . . . . . . . • Includes: one 1-7/8" (6,000 lb.) ball, one 2" (10,000 lb.) ball TRAILER LEVELS two 2-5/16" (10,000 lb.) balls LITEMATE® and three 5/8" hitch pins • Fits 2" square tubing • Adhesive back • Tri-ball tube with special rotating operating • 2" long design 99 4200105 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . /pr. 8110413 – Wt. 41.1 lbs. . . . . . . . . . . . . . . . . .

15999

TRAILER BALLS 2-1/2" BOLT LENGTH Ball Size

Cap. Bolt Size (lbs.) 3/4" 2,000 1-7/8" 1" 2,000 3/4" 3,500 2" 1" 5,000 1" 5,000 2-5/16" 1-1/4" 10,000

Wt. (lbs.) 1.8 2.2 2.1 2.5 3.4 4.0

REPLACEMENT TRAILER BALL NUTS and WASHERS

354

ITEM

PRICE

8194193 8194268 8194250 8194284 8194300 8198806

7.49 8.49 8.49 9.49 11.49 13.49

Size Wt. (lbs.) ITEM 3/4" 0.1 8182396 1" 0.3 8182446 1-1/4" 0.7 8182453

PRICE 1.49 1.69 1.99

1" to 3/4" BUSHING REDUCER

HITCH BALL WRENCH • 1-1/2" x 1-1/8" ends fit most popular hitch ball nuts • Chrome plated heat treated chrome-vanadium steel • 12 point box ends, with 15° offset • 18" long for added torque 8150328 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . .

3-3/8" BOLT LENGTH

Wt. ITEM PRICE (lbs.) 8194169 6.49 1.9 8194201 7.49 2.4 8194243 7.49 2.1 8194276 8.49 2.7 8194292 10.49 3.6 4200172 12.49 4.3

• Steel • O.D.: 1" dia • I.D.: 3/4" dia. • Allows use of 3/4" bolt size in a 1" bolt hole of ball mount 99 8182214 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

11 Truck & Trailer

7/24/08

10:56 AM

Page 355

TRAILER COUPLER BUMP GUARD

• Protects unused hitch ball from the elements. • Sturdy PVC construction with 4-WIRE FLAT PLUG HOLDER Size ITEM PRICE ITEM PRICE 1-7/8" & 2" 8103566 79 8151342 99 2-5/16" 8103574 8151359 REGULAR

999

TRAILER COUPLERS

“A” FRAME TRAILER COUPLERS

Ball Max. Size Class GTW 2" III 5,000 2-5/16" IV 10,000

• Helps prevent tow vehicle damage if trailer coupler contacts with vehicle during hook-up. • Easily slips on to coupler flange • Universal fit for most any class I to IV coupler 8208126 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . .

Wt. (lbs.) ITEM PRICE 6.7 8096984 24.99 8.2 8097008 29.99

Ball Class Max. Wt. ITEM PRICE Size GTW (lbs.) 2-5/16" IV 10,000 8.7 4200010 34.99

LOCKING COUPLER & HITCH PINS

B A

Zinc plated. Ball Max. Fits Class Size GTW Tongue 2" I 1-7/8" 2,000 2-1/2" 3" 2" II 2" 3,500 2-1/2" 3" III 2" 5,000 3"

Wt. (lbs.) ITEM PRICE 2.9 8096935 99 2.9 8096943 3.0 8096950 4.1 8157323 99 4.2 8157349 4.7 8096968 5.1 8144875 17.99

COUPLERS & HITCHES

HITCH BALL COVERS

• Zinc plated • Features positive trigger locking or unlocking operation Ball Max. Fits Wt. Class Size GTW Tongue (lbs.) ITEM PRICE 2" 2.4 4200045 10.99 I 1-7/8" 2,000 2" 3.9 4200048 12.99 II 2" 3,500 2-1/2" 4.0 4200049 12.99 3" 5.1 4200050 12.99 3" 5.2 4200052 19.99 III 2" 5,000

6,000 LB CAPACITY BRAKE ACTUATOR C

• With 2 pc flat keys • Pin can be locked without key • Chrome plated steel lock housing and pin • Nylon cap keeps dirt out • Fits most couplers and hitches A) SURGE BRAKE COUPLER LOCKING PIN 1/4" pin with 1" span. 8159451 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . B) SURGE BRAKE COUPLER LOCKING PIN 1/4" pin with 3-3/4" span. 8159436 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . C) 1/2" HITCH PIN LOCK 8159485 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . D) 5/8" HITCH PIN LOCK 8159667 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

• Mechanical over hydraulic • Lever lock, straight • Tongue weight: 600 lbs. • Ball coupler attachment: 1-7/8" to 2" ball 4200066 – Wt. 17.6 lbs. . . . . . . . . . . . . . . . .

18999

1299 HITCH PINS 1299 1299 1299

D E) 1/2" PIN & CLIP 4200041 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . F) 5/8" PIN & CLIP 4205217 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . .

399 449

355

COUPLERS & HITCHES

11 Truck & Trailer

7/24/08

10:56 AM

Page 356

HITCH & COUPLER LOCKS C

D A

A) LOCKING HITCH PIN Replaces standard hitch pin. 8043814 (1/2" dia.) – Wt. 0.8 lbs. . . . . . . . . . . . 8043823 (5/8" dia.) – Wt. 1.0 lbs. . . . . . . . . . B) TRAILER COUPLER LOCK • Zinc alloy housing with brass coating and steel pin • Includes 2 keys 8104259 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

C) CLASS III HITCH PIN & LOCK • Plastic cover protects cylinder from ice, sand, and grime • Prevents scratching and marring of surfaces 99 8026708 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . 99 D) UNIVERSAL TRAILER COUPLER LOCK • Compatible with 1-7/8", 2", and 2-5/16" couplers • Guards against trailer towaway theft • Rust and corrosion resistant 99 • Easy to install and remove 8127755 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . .

9 12

1599

3299

TOW RING ASSEMBLIES F

G E

E) FORGED RECEIVER MOUNT TOW EYE • Straight pattern • Fits 2" receiver tube • Black powder coat finish • 12,000 lb. cap. • 2-1/2" eye 8173676 – Wt. 9.5 lbs. . . . . . . . . . . . . . . . . . . . F) FORGED RECEIVER MOUNT TOW HOOK • Straight pattern • Fits 2" receiver tube • Black powder coat finish • 12,000 lbs. cap. 8173742 – Wt. 8.7 lbs. . . . . . . . . . . . . . . . . . . .

G) ADJUSTABLE TOW RING ASSEMBLY • Forged steel • 2,000 lb. vertical load • 12,000 lb. max. gross trailer weight • 3" I.D. eye • Complete with fasteners • 3-position channel 99 4200130 – Wt. 15.4 lbs. . . . . . . . . . . . . . . . . . . . H) 4-BOLT DRAW BAR • Forged steel • 7,000 lb. max. vertical load • 42,000 lb. max. gross trailer weight • Mounts with four 5/8" bolts on 4-1/2" centre mounting holes • 2-1/2" I.D. eye • 1-1/4" x 1-1/2" dia. ring material 99 4200132 – Wt. 16.2 lbs. . . . . . . . . . . . . . . . . . . .

3999

PINTLE HOOKS

K J

356

Forged steel. Size 5 Ton 15 Ton I 20 Ton 5 Ton J 8 Ton K

2" COUPLER BALL Max. Gross Vehicle Wt. 10,000 lbs. 30,000 lbs. 40,000 lbs. 10,000 lbs. 16,000 lbs.

Max Vertical Load 2,000 lbs. 6,000 lbs. 8,000 lbs. 2,000 lbs. 3,000 lbs.

Wt. (lbs.) 8.9 10.2 13.0 14.9 13.1

ITEM 4200129 4200128 4200139 4200147 4200126

PRICE 49.99 84.99 99.99 99.99 99.99

11 Truck & Trailer

7/24/08

10:56 AM

PINTLE MOUNT

• 10,000 lb. cap. • Fits 2" hitch receiver • 2" I.D. loop • Includes pin and clip 8063745 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . .

2999

• 10,000 lb. cap. • Pintle hook can be mounted in a high or low position • 4 pairs of 9/16" mounting holes • Vertical distance between holes is 1-3/4" • Horizontal distance between holes is 3-3/8" • Continuous welds, epoxy coated 4200124 – Wt. 15.0 lbs.. . . . . . . . . . . . . . . . . . . .

4999

5,000 LB CAPACITY TOW BAR • Provides a convenient way to tow your vehicle • Arms are fully adjustable with a max. width of 37-1/2" • Mounting brackets attach to vehicle using 5/8" bolts • Quick release pins to remove bar when not in use Use with safety chains • 5,000 lb. coupler fits 2" ball 8041550 – Wt. 36.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MOTORCYCLE HAULER

COUPLERS & HITCHES

HITCH RECEIVER TOW RING KIT

Page 357

15999

ROOF-TOP CARGO CARRIER

• 36" x 36" x 17" cargo carrier for use on most vehicles with 4-way roof racks • Easy to use with adjustable straps, quick release buckles and side handles 99 8087397 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . .

• With built-in detachable ramp • Carrying channel measures 76 x 5" • Fits into a 2" receiver • Frame locks bike in place - tie downs (not included) required to secure upper portion • 13" of clearance between receiver and frame 8169781 – Wt. 54.9 lbs. . . . . . . . . . . . . . . . .

TRAILER SAFETY

19999 CHAIN

TRAILER DOLLY

• 600 lb. cap. • Comes with 1-7/8" trailer ball • Ideal for moving small boat, snowmobile, or utility trailers 8002066 – Wt. 29.9 lbs. . . . . . . . . . . . . . . . . . . .

2 PC GRAB BAR SET

S-hook ends with safety latches. CLASS II TRAILER SAFETY CHAIN 1/4" x 48". 8169724 – Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 CLASS III TRAILER SAFETY CHAIN 1/4" x 48". 8187601 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 899

SPRING LATCH

• For use on pick-ups, vans, boats, and SUVs • 1/2" pin • Black nylon bracket with stainless steel tubes and screws 99 • Mounting bracket: 3" x 1-3/4" 3893187 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . 4220020 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

1099

357

7/24/08

10:56 AM

Page 358

WIRING PRIMARY WIRE • Thermoplastic coated copper wire • For all general purpose automotive and trailer applications Length Red Black Green 25 ft. 4210066 4210067 4210069 18 100 ft. 4210035 4210036 – 25 ft. 4210060 4210061 4210062 16 100 ft. 4210029 4210030 – 25 ft. 4210054 4210055 4210056 14 100 ft. 4210022 4210023 4210024 25 ft. 4210047 4210048 4210049 12 100 ft. 4210015 4210016 – – 10 25 ft. 4210041 4210042 – 8 25 ft. 4210075 4210077 GAUGE

COUPLERS & HITCHES

11 Truck & Trailer

White 4210070 – 4210063 – 4210057 4210025 4210051 – – –

PVC INSULATED TRAILER WIRE Designed for temperature ratings of -70°C to 60°C (-94°F to 140°F). Wire Gauge Strands Wt. (lbs.) 14 2 0.1 14 4 0.1 14 6 0.2 12 7 0.1

Blue 4210071 – 4210064 – 4210058 4210026 4210052 – – –

Yellow 4210072 – 4210065 – 4210059 4210028 4210053 – – –

Brown Wt. (lbs.) 8080996 0.2 – 0.9 8081028 0.3 – 1.2 8081051 0.4 8081069 1.7 8081077 0.7 – 2.6 – 1.1 – 1.9

PRICE 3.49 9.99 4.49 12.99 5.99 16.99 7.49 24.99 11.99 17.99

PARALLEL BONDED WIRE

ITEM 4210624 4210625 4210626 4210627

PRICE 0.45/ft. 4-wire strand. 0.99/ft. Gauge Length Wt. (lbs.) ITEM PRICE 1.39/ft. 14 price per ft. 0.1 4211355 0.89/ft 2.59/ft. 14 25 ft. spool. 1.9 4214219 19.99 A

TRAILER WIRING HOOK-UP ASSEMBLIES

B A) 4-PIN, 16-GAUGE WIRE, 12" LENGTH 8198129 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 2-PIN, 10-GAUGE WIRE, 12" LENGTH 8198137 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299 499

VEHICLE-TO-TRAILER WIRING SYSTEMS VEHICLE T-CONNECTORS • Installs quickly and easily; no wire cutting, stripping, or tapping • Plugs into tail light harness of the vehicle • Includes a detachable 4-way flat harness Hoppy # Wt. (lbs.) ITEM PRICE 0.4 41125 4210426 22.99 0.8 42115 4210438 34.99 0.5 40125 4210422 22.99 0.8 40145 8003739 29.99 0.9 41145 8003743 33.99

358

UNIVERSAL MULTI-TOW ADAPTERS 6-4 PIN • Hoppy #47175 • Provides 2 towing options from 1 vehicle end connector • 4-wire flat to 4-wire flat and 6 round adapter 8003745 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

3399

7-4 PIN • Includes integral 4-wire flat and 7 round adapter • Will work with any LiteMate® 5th wheel hitch wiring 8119505 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

2999

41145

Hoppy # Make Year CHEVROLET/GMC/CADILLAC 1988-98 41125 Full Size Pick-Ups Old Body Style 1999-00 Blazer/Jimmy 1992-94 Yukon/Tahoe 1995-99 Suburban 1992-99 Escalade 1999 Denali 1999-00 1999-02 41145 Silverado/Sierra 1500 Series 1999-02 DODGE/CHRYSLER/PLYMOUTH 1995-03 42115 Dakota Ram 1500 1995-01 Ram 2500 & 3500 1995-02 FORD F-150/F-250/ 1987-96 40125 F-350 Pick-Up F-250/F-350 Dual Wheel 1997-98 1997-03 40145 F-150 F-150 Reg. Cab 2004 F-250 Light Duty 1997-01

11 Truck & Trailer

7/24/08

10:56 AM

A B

A) 2 FT HARNESS with 4-WIRE CONNECTOR 99 4210429 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 7 to 5 and 4 MULTI-TOW ADAPTER 7-way blade to both 5-wire flat and 4-wire flat. 99 8173270 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . C) 7 to 6 and 4 HOPKINS MULTI-TOW ADAPTER • 7-way blade to both 6-round and 4-wire flat • Universal: centre pin can be switched to auxiliary/electric brake 99 8173213 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

16 19

TRAILER ADAPTERS H

D) TRAILER MULTI- ADAPTER • 7-way vehicle end to 5-wire flat and 4-wire flat • Also provides a 12V power socket. • Great for use with portable air compressors, RV lighting etc.. 99 8180101 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . E) 7 to 4 FLEX COIL ADAPTER • Flex-coil cable provides increased durability and length between tow vehicle and trailer • Weatherproof • Nite-glow ends indicate good connection and make ends easy to see in the dark • Illuminates with taillight function • Coil provides 3 ft. stretch 99 8141616 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . . .

F) 6-WAY ROUND to 4-WAY FLAT 8211906 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . G) 7-WAY RV BLADE to 4-WAY FLAT 8211948 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . H) 7-WAY RV BLADE to 6-WAY ROUND 8211955 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . .

799 799 1199

TRAILER WIRING & CONNECTORS

TRAILER ADAPTERS

Page 359

MOUNTING BRACKETS I) 4, 5, 6-POLE MOUNTING BRACKET 8198103 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J) 7, 9-POLE MOUNTING BRACKET 8198111 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TRAILER CONNECTORS

K 4 Male L 4 Female M 6 Male N 6 Female O 7 Male P 7 Female

M L

Pins

299 399

Wt. (lbs.) 0.2 0.4 0.4 0.4 0.2 0.3

ITEM

PRICE

8211963 8211971 8211989 8212003 8212011 8212029

599 649 699

Q) FLAT TRAILER CONNECTOR Includes four 25 ft. leads, 18" ground wire, and flat plug trunk connector with three 48" wires. 4200186 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . R) 4 FT HARNESS with 7-WIRE CONNECTOR 8005746 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

1099

1999

KEYCHAIN 4-WIRE FLAT TRAILER LIGHT TESTER

• Nylon housing • 3 LEDs for tail light, left turn light, and right turn light testing 8196990 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

349

PRINCESS AUTO RESPECTS YOUR PRIVACY We believe that all Princess Auto customers should be treated with dignity and respect. Princess Auto has developed a set of policies and procedures to follow to ensure your personal information is kept secure and private. To view this policy, please visit our website at www.princessauto.com or contact our National Call Centre for more information at 1-800-665-8685.

359

TRAILER WIRING & CONNECTOR

11 Truck & Trailer

7/24/08

10:56 AM

Page 360

CONNECTORS & TERMINALS 400 PC ASSORTED TERMINAL KIT Style

Gauge Colour 22-16 red blue Butt Connector 16-14 12-10 yellow 16-14 blue 16-14 blue 12-10 yellow Ring Terminal 12-10 yellow 12-10 yellow 12-10 yellow 16-14 blue female 12-10 yellow female Blade Connector 16-14 blue male 12-10 yellow male 16-14 blue female Bullet Connector 16-14 blue male

100 PC ASSORTED TERMINAL KIT Terminal

Gauge Colour Size 22-16 red – 16-14 blue – 22-16 red #6 blue #6 Ring Terminal 16-14 16-14 blue #10 16-14 blue male – Blade Connector 16-14 blue female – red #8 Spade Terminals 22-16 Plastic storage case. 4210799 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . Butt Connector

Qty. 10 5 30 30 5 5 5 10

Size – – – 7/32" 1/4" #10 1/4" 5/16" 3/8" – – – – – –

Qty. 30 40 30 20 20 20 20 25 25 40 25 25 5 20 15

• 20 blue tap-in-splice connectors (16-14 gauge)

99 • Plastic storage case 4210401 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

ALLIGATOR CLIPS

2499

10 PC ALLIGATOR CLIPS

A) 6 PC SET 1-7/8" chrome finished clips with insulator handles. 4210784 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) 28 PC ALLIGATOR CLIP ASSORTMENT • 2 pc 75 mm 15 amp charging clips • 2 pc 75 mm 30 amp charging clips • 6 pc 46 mm alligator clips • 2 pc 43mm 5 amp charging clips • 10 pc 50 mm alligator clips • 6 pc 50 mm alligator clips 8158354 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

Full cover insulators, 28mm 8215774 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 35mm 8215782 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 45mm 8215808 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

199 229 249

169 ANTI-CORROSION WIRING SEALANT

699

200 PC BUTT CONNECTOR KIT

• Prevents rust, corrosion, moisture buildup and contaminant damage to electrical connections • Creates a non-conductive physical barrier between electrical connections and surrounding area • Operating range: -40°C to 150°C 8039562 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

ELECTRICAL TESTER

360

Contains: • 50 red 22-16 gauge • 100 blue 16-14 gauge • 50 yellow 12-10 gauge 4210400 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

• Tests outlets, switches, fuses, spark plugs, and condensers • Checks for current, DC polarity, frequency and polyphase line • Measures: 110, 220, 360, and 480 volt • Complete with test leads 99 0720322 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

189

11 Truck & Trailer

7/24/08

10:56 AM

Page 361

TRAILER WIRING & CONNECTO

AUTOMOTIVE ELECTRICAL REPAIR KIT Wire crimping tool Assorted wire marrettes 6-12V tester Heat shrink tubes Assorted cable ties Slotted screwdriver Phillips screwdriver Two 32" test leads Assorted blade style fuses Assorted glass style fuses 1 roll of electrical tape Assorted rubber grommets 26 assorted wire nuts Fuse puller 10 pcs 1/8" wire clamps Primary wire 160 pc assorted insulated terminals 8065682 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

1999

• All Grote terminals are vinyl insulated with PVC insulation support • Terminals are recommended for continuous operating temperatures of 40° to 90°C (104° to 194°F) with a max. intermittent temperature of 150°C BULLET CONNECTORS/RECEPTACLES Wt. 0.1 lbs.

Gauge Type Qty. ITEM PRICE 16-14 connector 15 4210638 2.49/pkg. 16-14 receptacle 15 4210640 2.49/pkg. TAP-IN-SPLICE Hot line and tap-in line are inserted into clip. Metal clip is compressed with pliers. Lock cover is then snapped closed. Makes tap-in line or pigtail connections without cutting or stripping wires. Wt. 0.1 lbs.

Gauge Qty. ITEM PRICE 22-18 25 8065906 4.99/pkg. 22-18 5 4210680 1.99/pkg. 18-14 25 4210681 3.99/pkg. 18-14 5 4210682 1.99/pkg. MALE QUICK CONNECT

RING TERMINALS Wt. 0.1 lbs.

Gauge Stud Size Qty. ITEM PRICE /pkg. 22-18 8-10 15 4210646 1.99 16-14 6-8 15 4210647 1.99 16-14 8-10 15 4210648 1.99 16-14 12-1/4" 15 4210649 1.99 12-10 3/8" 15 4210628 2.99 12-10 12-1/4" 15 4210629 2.99 12-10 1/2" 15 4210630 3.19 16-14 3/8" 15 4210631 3.99 16-14 8-10 100 4210632 7.99 SPADE TERMINALS Wt. 0.1 lbs.

Gauge Stud Qty. ITEM PRICE Size /pkg. 22-16 4-6 15 4210633 2.49 16-14 4-6 15 4210635 2.49 16-14 8-10 15 4210636 2.49 12-10 8-10 15 4210637 2.99 FULLY INSULATED QUICK CONNECTORS 16-14 gauge. Wt. 0.1 lbs.

Type Qty. ITEM PRICE Male 15 4210657 2.49/pkg. Female 15 4210658 2.49/pkg.

Wt. 0.2 lbs.

Gauge Qty. ITEM PRICE 16-14 100 4210650 8.99/pkg. 16-14 15 4210651 1.99/pkg. 12-10 15 4210652 1.99/pkg. FEMALE QUICK CONNECT

ASSORTED GROMMETS

Wt. 0.2 lbs.

Gauge Qty. ITEM 16-14 100 4210653 16-14 15 4210654 12-10 15 4210655 BUTT CONNECTORS

PRICE 8.99/pkg. 1.99/pkg. 1.99/pkg.

30 various sized grommets. 4210675 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

RUBBER INSULATED CABLE CLAMPS

Wt. 0.2 lbs.

Gauge Qty. ITEM PRICE 22-18 100 4210641 8.99/pkg. 16-14 100 4210642 8.99/pkg. 22-18 15 4210643 1.99/pkg. 16-14 15 4210644 1.99/pkg. 12-10 15 4210645 2.49/pkg.

CRIMPING TOOL • Crimp and cut both insulated and non-insulated solderless connections and terminals • 9-3/4" long • Handles wire from 10 to 22 AWG 2922748 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

299/pkg.

2499

• Steel with zinc plating and rubber cushion • 15 piece sets 1/4" 8205403 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . 3/8" 8205411 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . 1/2" 8205429 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . 3/4" 8205437 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

549 599 699 799

361

WIRE STRIPPERS & CRIMPERS

11 Truck & Trailer

7/24/08

10:56 AM

NYLON CABLE CLAMPS

Page 362

99 PC NYLON CABLE CLAMP KIT

Resists corrosion and environmental elements. Wt. 0.1 lbs.

Size 1/4" 3/8" 1/2" 3/4"

Qty. 10 10 10 10

ITEM 8195968 8195992 8196008 8196024

PRICE 0.99/pkg. 1.19/pkg. 1.29/pkg. 1.39/pkg.

Assorted nylon clamps in a plastic storage case. 8193583 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

799

WIRE STRIPPERS

WIRE STRIPPERS & CRIMPERS

A) 4-WAY CRIMPING TOOL 99 8002932 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . B) 7-IN-1 WIRE STRIPPER • Wire stripper and cutter, steel wire cutter, pliers, wire loop, and crimping tool • Marked both SAE and metric 99 8025308 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . C) 48 PC CRIMPER TOOL SET • Assorted ring, spade, blade, and butt connectors • Crimper tool also cuts and strips wire 99 4213013 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . SELF-ADJUSTING WIRE STRIPPER/CUTTER D) Self adjusting for wire sizes: 26 AWG to 14 AWG. 99 8121543 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . E) Self adjusting for wire sizes: 14 AWG to 10 AWG. 99 8121568 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

2 2 6 5 9

F) DIAGONAL PLIERS / WIRE STRIPPER • 1,000 volt insulated grip • 5 functions: wire cutter, 7 size stripper, multi crimper, small nut wrench and opener 99 2920146 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . G) WIRE STRIPPER & CRIMPER • Crimps open barrel, non-insulated and insulated terminals • Cuts bolt sizes: M-2.6, P.045, M-3.0, P.050, M-3.5, P0.60, M-4.0, P0.70, M-5.0, P0.80 • Strips AWG NO.: 20-22, 18, 16, 14, 12, 10, MM2: 0.5-0.75, 1.0, 1.5, 2.5, 4.0, 5.0-6.0 49 8002261 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . H) ADJUSTABLE HEAVY DUTY WIRE STRIPPER • Self adjusting strippers combine with adjustable stopper for wire stripping length • Cut and strip 10 to 24 AWG copper or aluminum wire, solid or stranded • Crimp 10 to 22 AWG insulated terminals • Crimp 4 to 22 AWG non-insulated terminals • Crimp 7 to 8 mm ignition terminals 99 2990264 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

Ro yal Ser vice Pr omise ..... No sale is final until you're satisfied. If you are unhappy with any purchase, simply return it and we will repair, replace or refund your purchase. 362

11 Truck & Trailer

7/24/08

10:56 AM

Page 363

• 2 to 1 shrink ratio • Polyolefin • 125°C/600 volt • 6" lengths

• 2 to 1 shrink ratio • Polyolefin • 125°C/600 volt Dia. 1/8" 1/8" 3/16" 3/16" 1/4" 3/8"

Length 25 ft. 25 ft. 25 ft. 25 ft. 15 ft. 10 ft.

Wt. 0.1 lbs.

Colour Wt. (lbs.) Black 0.2 Red 0.3 Black 0.2 Red 0.2 Black 0.1 Black 0.1

ITEM PRICE 4210870 8.99 4210871 8.99 4210868 9.99 4210869 9.99 4210866 7.99 4210864 6.99

Dia. Colour ITEM PRICE 1 x 3/4", 2 x 1/2", Black/ 2 x 3/8", 2 x 1/16" White 4210877 2.99/pkg. 5 x 1/2" Assorted 4210873 2.99/pkg. 5 x 3/8" Assorted 4210872 2.99/pkg. 2 x 1/4", 2 x Black/ 3/16", 2 x 1/8" White 4210876 2.99/pkg. 6 x 1/4" Assorted 4210875 2.99/pkg. 6 x 3/16" Assorted 4210874 1.99/pkg.

• 2 to 1 shrink ratio • Polyolefin • 125°C/600 volt Wt. 0.1 lbs.

Dia. 2.0 mm 3.0 mm 3.5 mm 5.0 mm 6.0 mm

Length Qty. ITEM PRICE 6" 50 4210091 6.99/pkg. 6" 50 4210092 7.99/pkg. 6" 50 4210093 7.99/pkg. 6" 50 4210094 9.99/pkg. 6" 50 4210095 10.99/pkg.

SPLIT FLEX WIRE LOOM

• 3 to 1 shrink ratio • Polyolefin • Adhesive lined to seal out water • 3" lengths, dia.: 1/8" and 3/16" • Qty.: 10 pieces 4210967 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

TRAILER WIRING & CONNECTORS

HEAT SHRINK TUBING

599

• Black poly split loom provides cabling/hose with protection from the elements • Rated up to 93C. (200F) • New sizes ; 3/4" and 1" Dia. Length Wt. (lbs.) ITEM PRICE 1/4" 25 ft. 0.2 8209249 5.49 3/8" 25 ft. 0.4 8209256 5.99 1/2" 25 ft. 0.4 8209264 6.99 3/4" 25 ft. 0.8 8218828 8.99 1" 25 ft. 1.0 8218844 11.99

CABLE TIE GUN Tightens any length of cable tie. 8007630 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

CABLE TIES B

A) 50 PC ASSORTED COLORS CABLE TIES 10 pc each of blue, red, yellow, orange, and green 7-1/2" cable ties. 8143885 – Wt. 0.1 lbs.

B) 125 PC CABLE TIES 25 of 4"/18 lb. tensile strength, 25 of 8"/18 lb. tensile strength, 25 of 8"/50 lb. tensile strength, 25 of 11-1/2"/40 lb. tensile strength, 25 of 15-1/2"/50 lb. tensile strength. 99

Wt. 0.4 lbs. 8006675 – WHITE 8105520 – BLACK . . . . . . . . . . . . . . . . . . . . . .

1599

363

CABLE TIES

11 Truck & Trailer

7/24/08

10:56 AM

Page 364

CABLE TIES

Size Qty. Wt. (lbs.) 3" x 3/32"* 1,000 0.4 8" x 1/8"** 1,000 2.0 7-1/4" x 3/16"* 25 0.1 4"* and 8"** 100 0.1 9-1/2" x 1/4"** 100 0.7 11-1/4" x 1/4"** 100 0.9 14-1/2" x 3/16"** 100 0.5 *18 lb. tensile strength A) UV RESISTANT CABLE TIES Size 4" long 4" long 8" long 8" long

Qty. 30 100 15 100

Wt. (lbs.) 0.1 0.1 0.1 0.2

ITEM PRICE 6.49/pkg. 8144172 8140873 22.49/pkg. 2.49/pkg. 8140949 2.49/pkg. 8144099 7.49/pkg. 8140808 8.49/pkg. 8140626 8140675 12.49/pkg. ** 50 lb. tensile strength ITEM 8144198 8144214 8144248 8140733

PRICE 1.49/pkg. 3.49/pkg. 1.49/pkg. 5.49/pkg.

B) 100 PC REUSABLE CABLE TIES 5-1/2" LONG 49 /pkg. 8144263 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1/2" LONG 49 /pkg. 8144289 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1/2" LONG 49 /pkg. 8140758 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . C) 650 PC CABLE TIES • 18 lb. tensile strength: 100 of 4" white, 50 each of 4" red, blue, yellow, and green • 40 lb. tensile strength: 300 of 8" white • 50 lb tensile strength: 50 of 11" white • Clear plastic case 99 8140618 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 8 10

100 pc. per pkg. Size Wt. (lbs.) 3/4" x 3/4" 0.2 1" x 1" 0.4 1-3/16" x 1-3/16" 0.5 1-1/2" x 1-1/2" 1.0

ITEM PRICE 8167256 2.99 8167272 3.99 8167280 4.99 8167298 5.99

SADDLE-TYPE CABLE MOUNTS 100 pc. per pkg. Size Wt. (lbs.) ITEM PRICE 1/4" x 3/8" x 1/2" 0.1 8167306 9.99 3/8" x 1/2" x 7/8" 0.4 8167439 4.99

QUICK-TIES INDUSTRIAL STRENGTH TWIST GRIP

10 PC FABRIC CABLE TIES

• Reusable and resizeable • Colour coded • Hook and loop design Length Wt. (lbs.) ITEM PRICE 6" 0.1 8195539 2.99 8" 0.1 8195547 3.99 10" 0.1 8195554 4.99

• 4 pc 17" Quick-Ties • High density steel alloy core with high density foam coat • Works in cold and heat • Hundreds of uses : organize tools, hang extension cords, bundle hoses, and more 8192056 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

SHOP ONLINE www.princessauto.com • Secure Shopping • Catalogue Download

364

• Store Locations and Hours of Operation • Flyer Download

499

11 Truck & Trailer

7/24/08

10:56 AM

Page 365

A D C

G E H

TRAILER LIGHTING

CLEARANCE/MARKER LIGHTS

J I

F) BULLSEYE LIGHT O’all dim.: 4"L x 2"H x 1-1/8"D. Wt. 0.1 lbs.

A) BEEHIVE LIGHT 2-1/2" dia. acrylic lens and housing with metal mounting bracket.

4216859 – RED 4216842 – AMBER . . . . . . . . . . . . . . . . . . . . REPLACEMENT LENS

Wt. 0.1 lbs.

4200016 – RED 4200017 – AMBER . . . . . . . . . . . . . . . . . . . B) MINI LIGHT • White base with mounting holes • Acrylic lens locks into ABS base • O’all dim.: 3-3/16" x 1-1/8" x 1" Wt. 0.1 lbs. 8186405 – RED . . . . . . . . . . . . . . . . . . . . . . . 8186421 – AMBER . . . . . . . . . . . . . . . . . . . .

Wt. 0.1lbs.

199/ea.

Wt. 0.1 lbs.

8027743 – RED 49 8005233 – AMBER . . . . . . . . . . . . . . . . . . . /ea. H) ROUND SURFACE MOUNT LIGHT • Acrylic lens • O'all dim - 2-1/2" x 1" Wt. 0.1 lbs. 8186363 – RED 99 99 /ea. 8186371 – AMBER . . . . . . . . . . . . . . . . . . /ea. I) CLEARANCE / MARKER LIGHT with CHROME BASE 4-3/4" dia. x 2-1/8" chrome plated acrylic lens with plastic housing.

Wt.0.1lbs.

Wt. 0.1 lbs.

8026352 – RED 8027663 – AMBER . . . . . . . . . . . . . . . . . . . . E) CATSEYE LIGHT • Acrylic lens • O’all dim.: 4" x 3-1/2" x 2"

4216867 – RED 4216875 – AMBER . . . . . . . . . . . . . . . . . . . 1.49/ea. G) 2-1/2" ROUND SEALED LIGHT • Polycarbonate lens, sonic welded • O’all dim.: 2-1/2" dia. x 11/16" high

/ea. 299 299/ea.

C) RECTANGULAR LIGHT O’all dim.: 3-7/8"W x 2-1/8"H x 3/8"D. 8027681 – RED 8027707 – AMBER . . . . . . . . . . . . . . . . . . . . D) THIN-LINE LIGHT • For narrow rails and channels where 2" wide lights won’t fit • O’all dim.: 3-1/2"L x 1"W x 1-1/8"H

349/ea.

Wt. 0.3 lbs.

349/ea.

Wt. 0.1 lbs.

Wt. 0.5 lbs.

8186397 – RED 8186389 – AMBER . . . . . . . . . . . . . . . . . . . . . . .

349

8186330 – RED 4200183 – AMBER . . . . . . . . . . . . . .

1499/ea. set

RED/AMBER FENDER MARKER LIGHT

IDENTIFICATION LIGHT BAR

• Required on trailers over 80" wide • Red polycarbonate lens with black base • O’all dim.: 17" x 1-7/16" x 1-5/8" INCANDESCENT 3 sealed #194 lights. 8186595 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . LED IDENTIFICATION LIGHT BAR 3 sealed super LEDs. 8186603 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

4200023 – RED 99 /ea. 4200022 – AMBER . . . . . . . . . . . . . . . . . . . . J) 6PC MINI CLEARANCE / MARKER LIGHT SET • Includes wiring harness and connectors • O’all dim.: 3/16" x 1" x 1-1/8"

12 24

• Commonly used on cargo trailers and recreational trailers • Polycarbonate lens • Chrome plated base and plug • O’all dim.: 4-1/8" x 1-1/4" x 1-3/16" 99 INCANDESCENT 8186454 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 LED 8186462 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

599 1099

365

LED CLEARANCE/MARKER LIGHTS

11 Truck & Trailer

7/24/08

LED CLEARANCE / MARKER LIGHTS

10:56 AM

Page 366

• Epoxy resin coated circuit boards have 5 mm LEDs to provide over 100,000 hour life rating • Meets or exceeds all DOT requirements • Superflux models offer high intensity light (Superflux - 50mA, standard LED - 20mA)

A C and D

I G

J K

A) MINI CLEARANCE/MARKER LIGHT • 3 super LEDs • Pre-installed lead wire • O’all dim.: 3-3/16" x 1-1/16" x 1-1/16" Wt. 0.1 lbs.

8186413 – RED 99 8186439 – AMBER . . . . . . . . . . . . . . . . . . . . . . . B) THIN-LINE CLEARANCE/MARKER LIGHT • 6 diodes, comes with base and mount • O’all dim.: 3-7/8" x 1-1/4" polycarbonate lens

G) CATSEYE CLEARANCE/MARKER LIGHT • 6 diodes • O’all dim.: 4" x 2-1/16" x 15/16" acrylic lens Wt. 0.1 lbs.

8006324 – RED 99 /ea. 8006325 – AMBER . . . . . . . . . . . . . . . . . . . . H) MINI CLEARANCE/MARKER LIGHT Wt. 0.1 lbs. • O’all dim.: 2-7/8" x 1-1/2" x 1" 8119661 – RED 99 /ea. • Polycarbonate lens with 3 diodes 8119679 – AMBER . . . . . . . . . . . . . . . . . . . . • Includes wire and plug C) 2" ROUND CLEARANCE/MARKER LIGHT Wt. 0.1 lbs. • 3 diodes. 8122210 – RED 99 • Comes with rubber grommet /ea. 8122228 – AMBER . . . . . . . . . . . . . . . . . . . . • O’all dim.: 2" dia. x 1"H acrylic lens I) 2" ROUND CLEARANCE/MARKER LIGHT Wt. 0.1 lbs. • Acrylic lens with 9 superflux diodes 8122178 – RED 99 • O’all dim.: 2" dia. x 1"H /ea. 8122186 – AMBER . . . . . . . . . . . . . . . . . . . . • Includes wiring pigtail D) 2-1/2" ROUND CLEARANCE/MARKER LIGHT Wt. 0.1 lbs. • 12 diodes 8159311 – RED 99 • Comes with rubber grommet 8182107 – AMBER . . . . . . . . . . . . . . . . . . . . . /ea. Wt. 0.2 lbs. J) CLEARANCE/MARKER LIGHT with CHROME 8067662 – RED 99 BASE /ea. 8067654 – AMBER . . . . . . . . . . . . . . . . . . • 4 super LED's and 2 standard LED's E) BULLSEYE CLEARANCE/MARKER LIGHT • Steel housing with high impact mounting pad • 10 diodes • Acrylic lens • O’all dim.: 4-1/16" x 2-1/8" x 1-1/8" acrylic Wt. 0.5 lbs. lens 8122194 – RED 99 /ea. Wt. 0.2 lbs. 8122202 – AMBER . . . . . . . . . . . . . . . . . . . . 8119695 – RED 99 K) 6PC CLEARANCE/MARKER LIGHT KIT /ea. 8119687 – AMBER . . . . . . . . . . . . . . . . . . . . • Each light installed with 3 super LEDs F) RECTANGULAR CLEARANCE/MARKER LIGHT • With wire harness & connectors • 6 diodes • O’all dim.: 3-3/16" x 1-1/16" x 1-1/16" • O’all dim.: 3-7/8" x 1-1/4" acrylic lens • Polycarbonate lens

Wt. 0.6 lbs.

Wt. 0.2 lbs.

366

8006322 – RED 8006323 – AMBER . . . . . . . . . . . . . . . . . . . .

/ea.

8186355 – RED 8186348 – AMBER . . . . . . . . . . . . . . . . . .

3499/ea.

11 Truck & Trailer

7/24/08

10:56 AM

Page 367

TRAILER LIGHTING

CLEAR LENS LED CLEARANCE /MARKER LIGHTS A

B E F

C D) THINLINE CLEARANCE/MARKER LIGHT • 8 to 14 VDC • Clear polycarbonate lens with 6 LEDs and chrome plated bracket • O’all dim.: 3-7/8" x 1-1/4"

D A) MINI CLEARANCE/MARKER LIGHT • Clear polycarbonate lens with 3 LEDs • Chrome plated bracket • O’all dim.: 2-7/8" x 1-1/2" x 1" Wt. 0.1 lbs. 8182032 – RED LEDS 8182099 – AMBER LEDS . . . . . . . . . . . . . .

Wt. 0.1 lbs. 8181935 – RED LEDS 8181943 – AMBER LEDS . . . . . . . . . . . . . .

899/ea.

E) 2" ROUND CLEARANCE/MARKER LIGHT with GROMMET B) RECTANGULAR CLEARANCE/MARKER LIGHT • Clear acrylic lens with 4 LEDs • O’all dim.: 2" dia. x 1"H • Clear acrylic lens with 6 LEDs Wt. 0.1 lbs. • O’all dim.: 2-7/8" x 2-1/8" x 15/16" 8182016 – RED LEDS Wt. 0.2 lbs. 99 8182024 – AMBER LEDS . . . . . . . . . . . . . /ea. 8181844 – RED LEDS 99 8181885 – AMBER LEDS . . . . . . . . . . . . . . /ea. F) BULLSEYE CLEARANCE/MARKER LIGHT • 12 VDC C) CATSEYE CLEARANCE/MARKER LIGHT • Clear acrylic lens with 10 LEDs • Clear acrylic lens with 6 LEDs • O’all dim.: 4-1/16" x 2-1/8" x 1-1/8" • O’all dim.: 4" x 2-1/16" x 1"

699/ea.

Wt. 0.1 lbs. 8181893 – RED LEDS 8181901 – AMBER LEDS . . . . . . . . . . . . . .

Wt. 0.2 lbs. 8182008 – RED LEDS /ea. 8181968 – AMBER LEDS . . . . . . . . . . . . . .

999/ea.

LED STOP/TURN/TAIL LIGHTS G

I H

L J

G) 4" ROUND LIGHT • 8 to 14 VDC • Clear polycarbonate lens with 10 pc. super flux LEDs • Lens appears clear when not activated AMBER-TURN/TAIL 8181919 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . RED – STOP/TURN/TAIL 8006326 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . H) 7" STOP/TURN/TAIL LIGHT • 31 superflux diodes • Includes mounting pad and lens gasket 8059586 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . I) 6" RED OVAL LIGHT • 10 superflux diodes • Clear polycarbonate lens lights up red • O’all dim.: 6-7/16" x 2-5/16" x 1-3/4" • Lens appears clear when not activated AMBER – TURN/TAIL 8181927 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . RED – STOP/TURN/TAIL 8006327 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . .

1999 2499 3499

2499 2999

J) 4" ROUND STOP/TURN/TAIL LIGHT 56 diodes. 8024933 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . K) 3-3/4" STOP/TURN/TAIL LIGHT • Acrylic lens with 18 superflux diodes • Mounts with 1/4" studs, 2" centre distance 8064370 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . With license plate light 8064388 – Wt. 0.5 lbs. L) OVAL STOP/TURN/TAIL LIGHT 13 diodes. 8024899 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . M) 4" RED/AMBER DOUBLE FACE TURN SIGNAL LIGHT • Polycarbonate lens with 21 diodes • Plastic housing with chrome plating 8059552 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . N) 4" LED STOP/TAIL/TURN LIGHT • Polycarbonate lens with 24 pc. super flux LED • Includes grommet and 3-wire plug 8126047 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . .

3499 2999 3499 3499 3499 2499

367

TRAILER LIGHTS

11 Truck & Trailer

7/24/08

10:56 AM

DOME LIGHT with SWITCH

Page 368

AUTOMOTIVE DOME LIGHT

• 12 VDC, clear polycarbonate lens • Steel housing • #1156 bulb 8063893 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

• Acrylic lens • O’all dim.: 4"L x 2"W x 1"D

399

99 8119653 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

STOP/TURN/TAIL LIGHTS

C A

H F

G E) OVAL LENS SIGNAL LIGHTS • Black ABS housing with snap-on acrylic amber lens • Lens size: 4-5/16" x 2-3/8" • With mounting stud

A) 4" RED STOP/TURN/TAIL LIGHT Polycarbonate lens. 8186470 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . B) RED TAIL LIGHT • 12 VDC • Acrylic lens with snap-on plastic housing • 2 pc 1/4" studs on 2" centres • O’all dim.: 4-5/16" x 3-3/8"

Wt. 0.5 lbs.

8186520 – AMBER 99 8186504 – RED & AMBER. . . . . . . . . . . . . . . . .

F) ROUND 4" STOP/TURN/TAIL LAMP with GROMMET and PLUG Polycarbonate lens. 99 8186579 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . G) OVAL 6" STOP/TURN/TAIL LAMP with GROMMET and PLUG Polycarbonate lens. 99 8186587 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . H) RED STOP/TURN/TAIL LIGHT • Zinc alloy die casted housing with chrome plating • Acrylic lens • Stud mount type 99 8186512 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . I) UNIVERSAL STOP/TURN/TAIL LIGHT • Acrylic lens attached to polycarbonate housing • Stop, turn, tail, back-up and license function, with three 1/4" diameter mounting studs • DOT approved 99 8182982 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . .

Wt. 0.4 lbs.

8186553 – WITH LICENSE PLATE LIGHT 8186561 – NO LICENSE PLATE LIGHT . . . . C) RED STOP/TURN/TAIL LIGHT • Acrylic lens • Universal mount type • Bracket steel housing with license light 4200185 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . D) RECESSED TAIL LIGHT O’all dim.: 5-1/2" dia. x 1-1/2" deep.

699

499 799

Wt. 0.5 lbs

4219085 – RUBBER MOUNTED 99 8210668 – STEEL MOUNTED . . . . . . . . . . . . . Replacement lens for Powerfist lights: 4219085 & 8210668. 99 8210650 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . .

7 1

1-1/2" LICENSE PLATE/COURTESY LIGHT White translucent polycarbonate lens on bottom half of light and chrome top half. 4200021 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

LED LICENSE PLATE LIGHT

368

• Clear 2 super LED license plate light with polycarbonate lens • Operates on 8 to 14VDC 8197618 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

999

11 Truck & Trailer

7/24/08

10:56 AM

LED STRIP LAMPS • 12 VDC • 24 LED bulbs • Waterproof PVC • Suitable for interior or exterior of car • O’all length: 9" Wt. 0.2 lbs.

• 12 V 8059495 – RED . . . . . . . . . . . . . . . . . . . . . . . . . . • O’all dim.: 5-9/16" x 3-1/4" 99 8059503 – BLUE . . . . . . . . . . . . . . . . . . . . . . . . . 4216909 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . Without license plate light. 99 4216917 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . LED ACCENT LIGHTING REPLACEMENT LENSES FOR ABOVE Side lens. 4219143 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 1.99 Round lens. 4219150 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 3.99

13 13

TRAILER LIGHT MOUNTS

1499 1999

TRAILER LIGHTING

RED TAIL LIGHT with LICENSE PLATE LIGHT

Page 369

• Pack of 2 blue LED accent lights • Mount anywhere lighting is desired with self adhesive backing • Operates on 12VDC • Includes wiring and switch 99 8063877 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

REVERSE LIGHT

C D • Clear lens reverse light with standard #1156 bulb • Operates on 12VDC. 5" wide lens 99 8063885 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

LED REVERSE LIGHT

PLASTIC FLANGE MOUNTS Wt. 0.1 lbs.

A) 8067563 – 4" ROUND 99 /ea. B) 8067605 – 6" OVAL . . . . . . . . . . . . . . . . . . C) 4" ROUND STAINLESS STEEL FLANGE MOUNT 99 8067571 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . BRACKETS For mounting lights at 90° angles. • Clear poly lens with 54 LED bulbs for super Wt. 0.7 lbs. high output D) 8067555 – 4" ROUND 99 • Works well even in inclement weather E) 8067597 – 6" OVAL . . . . . . . . . . . . . . . . . . . . . • Operates on 12VDC. 4" diameter lens 99 8059560 – Wt. 0.5 lbs.

6 4

2 PC TRAILER LIGHT GUARD WIRING PIGTAILS F G

F) FOR CLEARANCE/MARKER LIGHTS • Protects most sizes of trailer stop/turn/tail lights 8187411 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . • O’all dim.: 6"H x 6"W x 4"D 99 G) FOR STOP/TURN/TAIL LIGHTS 8187288 – Wt. 10.2 lbs. . . . . . . . . . . . . . . . . . . 8186496 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

149 179

369

TRAILER LIGHTING

11 Truck & Trailer

7/24/08

10:57 AM

Page 370

RUBBER GROMMETS for TRAILER LIGHTING C

A) ROUND GROMMETS 2" RUBBER GROMMET 8202129 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4" RUBBER GROMMET 8186488 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 2-1/2" LIGHT CLEARANCE/MARKER LIGHT GROMMET 8186447 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C) GROMMET for 6" OVAL LAMPS 8034487 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D) & E) FOR FLUSH MOUNTING 12V LIGHTS

99¢ 199 149 199

Wt. 0.4 lbs.

D) 8067548 – 4" ROUND E) 8067589 – 6" OVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

399

TRAILER LIGHT KITS F G

H J K

I F) TRAILER LIGHT KIT • Fits all types of snowmobile, camper, or utility trailers under 80" wide • 2 traditional style stop/turn/tail lights with red side markers • 2 catseye amber bolt-mount type marker lights • 20 ft. split “Y” 4-wire harness for trailer (male end) • 4 ft. 4-wire harness for vehicle (female end) 99 4200110 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . G) SUBMERSIBLE LOW PROFILE TRAILER LIGHT KIT • Fits all types of boat, snowmobile, camper, or utility trailers over 80" wide • 2 rectangular stop/turn/tail lights • 25 ft. split “Y” 4-wire harness • 4 ft. 4-wire harness 99 8062705 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . H) SUBMERSIBLE TRAILER LIGHT KIT • Fits all types of boat, snowmobile, camper, or utility trailers under 80" wide • 2 stop/turn/tail lights with built-in red side markers • 23 ft. split “Y” 4-wire harness for trailer end • 4 ft. 4-wires harness for vehicle end 99 8039877 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . .

370

I) SUBMERSIBLE TRAILER LIGHT KIT • Fits all types of boat, snowmobile, camper, or utility trailers under 80" wide • 2 stop/turn/tail lights with built-in red side markers • 2 catseye style amber clearance/marker lights • Complete wiring 99 4200174 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . J) SUBMERSIBLE LED TRAILER LIGHT KIT • Fits all types of boat, snowmobile, camper, or utility trailers under 80" wide • 2 stop/turn/tail lights • 2 rectangular LED amber marker lights • 25 ft. split “Y” wiring harness for trailer end • 4 ft. 4-wire harness for vehicle end 99 8006317 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . K) SUBMERSIBLE LOW PROFILE LED TRAILER LIGHT KIT • 2 rectangular LED stop/turn/tail lights (12 diodes for stop, 6 diodes for marker, and 4 diodes for license plate light • 25 ft. split “Y” wiring harness for tailer end • 4 ft. 4-wire harness for vehicle end 99 8059545 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . .

11 Truck & Trailer

7/24/08

10:57 AM

Page 371

• Use with RVs, cars, boats, tow trucks and machinery • Easy hook-up and removal • Connects to any standard automobile lighting system A) EZ MOUNT TOWING LIGHTS • Functional tow lights with easy mounting hinged flaps that hook into trunk of vehicle • Includes 20 ft. wiring harness and plug 99 8056122 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . B) 12V TOWING LIGHT KIT • Two 4-1/2" dia. red lights with magnetic base • 20 ft. wiring harness with 4-pin connector 99 8002382 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . C) 12V TOWING LIGHT KIT • Two 4-5/16" dia. red/amber lights with magnetic base • 20 ft. wiring harness and standard 4 pin connector • Heavy duty magnetic base, with 8 lbs. pull, has non-scratch vinyl covering to protect vehicle finishes 99 8002381 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . D) 12V HEAVY DUTY TOWING LIGHTS • Two 4" dia. red lights with magnetic base • 5 ft. wire between lights • 30 ft. wiring harness and 4-pin connector 99 8056113 – Wt. 5.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . E) LED 12V HEAVY DUTY AUXILLIARY TOW LIGHTS • Heavy duty magnetic base with scratch resistant covering • 30' heavy duty cable and 4-way connector • Long life LED sealed lights 99 8175812 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . .

39 44

TRAILER LIGHTING

12V TOWING LIGHT KITS

46 99

129

WIRELESS LED TOW LIGHTS

• Super bright LED towing kit, visible up to 1 mile. • Complies with DOT standards. • Mounts magnetically or can be strapped on. • Perfect for tow trucks, boat trailers, farm use, towed vehicles etc. • Includes 2 light modules, mounting straps, transmitter module, magnetic base, standard 4-wire flat plug and 6 ft. harness 8180341 – Wt. 5.6 lbs.

17999

ROTATING BEACON LAMPS

G H F) 12 VDC REVOLVING AMBER LIGHT • 12V power outlet plug with 10 ft. coiled cord • 4-1/4" dia. magnetic base 99 8074155 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . G) AMBER TEAR DROP MODEL • Magnetic mounting • 12V power outlet plug with coiled cord • 1.7 amps 99 4250026 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . .

29 34

H) 12V WARNING STROBE LIGHT • Amber polycarbonate lens • 5" dia. x 4" high • 135,000 candle power • Emits 72 flashes per minute 4250028 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . .

5999

371

TRAILER LIGHTING

11 Truck & Trailer

7/24/08

10:57 AM

Page 372

REFLECTORS A C B

B) RECTANGULAR 2-HOLE REFLECTORS O’all dim.: 4-7/16"L x 1-1/8"H. Wt. 0.1 lbs

A) ROUND CENTRE HOLE REFLECTORS O’all dim.: 3-1/4" dia.

4219093 – RED 29 /ea. 4219101 – AMBER . . . . . . . . . . . . . . . . . . . . . . C) 2 PC RECTANGULAR 2" X 3-1/2" REFLECTORS • Low profile 59 /ea. • Meets and exceeds DOT and SAE requirements

Wt. 0.1 lbs.

8027798 – RED 8027814 – AMBER . . . . . . . . . . . . . . . . . . . . . . O’all dim.: 2-1/2" dia. 4212908 – RED 4212916 – AMBER . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs. 29

/ea.

ANTI-SLIP GRIP STRIP

8040800 – RED 8040818 – AMBER . . . . . . . . . . . . . . . . . . . . . .

499/ea.

2" CONSPICUITY TAPE 3 YR. WARRANTY

• Helps prevent slips for safer footing • For use on steps, ladders, ramps, farm equipment, decks, campers, boats, trailers, pools, docks • 6" x 21" 8040834 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Adhesive-backed for easy installation • Impact and solvent resistant • DOT and NHTSA approved • Mandatory on trailers 80" (2.032 m) or wider and 10,000 lbs. (4,536 kg) GVWR or heavier • Alternating 7" silver/11" red • Sold per foot 99 99 8005079 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . /ft.

CONSPICUITY STRIPS

CONSPICUITY TAPE

E D D) HIGHLY REFLECTIVE CONSPICUITY TAPE • Improves visibility • Used for trailers, automotive, RVs, farm machinery, bicycles and snowmobiles 1-1/2" x 2 FT ROLL

3 YR. WARRANTY • 2" x 18" strips • 7" silver/11" red • Pkg. of 5 3810046 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . .

1499/pkg.

12" REFLECTIVE STRIPS

Wt. 0.1 lbs.

5040128 – RED 5040125 – RED/SILVER . . . . . . . . . . . . . . . 1-1/2" x 4 FT ROLL Wt. 0.1 lbs.

599/roll 999

/roll 5040199 – RED/SILVER . . . . . . . . . . . . . . . E) REFLECTIVE CONSPICUITY TAPE • Used for utility trailers, farm equipment, campers, RVs, boat and horse trailers • 1-1/2" x 40" roll Wt. 0.1 lbs. 5040132 – SILVER 5040133 – RED 99 /roll 5040134 – RED/SILVER . . . . . . . . . . . . . . .

TECH TIP

• ABS/acrylic material • Sealed optics • Adhesive backed or screw on (2 holes for #8 screws) • Easily mountable on truck or trailer • FMVSS SAE Code: DOT-C RED 4210540– Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . CLEAR 4210539– Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

449 449

LED SAFETY LIGHTS

372

Trailers in excess of 10,000 lbs and are over 80" in width, that were manufactured prior to 1993 and operated in Canada must be retrofitted with reflective tape. See your local Princess Auto store for trailer style specific reflective requirements

• 18 diode • Flash or solid setting • Super bright LED; up to1-1/4 mile visibility • Uses 4 “AA” batteries (sold separately) • Dual magnetic mount Wt. 0.5 lbs. 8091316 – RED 8092173 – AMBER . . . . . . . . . . . . . . . . . . . .

2499/ea.

11 Truck & Trailer

7/24/08

10:57 AM

SLOW MOVING SIGNS A B

• 3 pc emergency warning triangles • DOT approved • Plastic carrying case 8180119 – Wt. 10.9 lbs. . . . . . . . . . . . . . . . . . .

REFLECTIVE FLUORESCENT RED & ORANGE Measures: 14"H x 16"W. A) PLASTIC 5040449 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . METAL 5040079 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 B) ADHESIVE DECAL 5040170 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

AUXILIARY LIGHTS

799 899 599

TRAILER SAFETY

EMERGENCY WARNING TRIANGLE KIT

Page 373

FOG LIGHTS

CHROME FLOOD LIGHTS

• 12 VDC • 3/8" mounting bolt • Includes mounting hardware • Bright chrome finish • 35 watt • 3,000 candle power • 5" lens • O’all dim.: 4-3/4" x 6" x 2-3/4" 8002640 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . .

C • 12 VDC, 100W • Stud mount C) 6" LENS Metal housing with chrome plating.

Wt. 2.3 lbs.

SUPER WHITE FOG LIGHT SET

8063695 – NEON BLUE LENS . . . . . . . . . . . . D) 7" LENS • Metal housing with black enamel • With clear PVC protector 8063760 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . . . . .

2499 3499

12V QUARTZ HALOGEN DRIVING LIGHT KIT

• 12V 55W (H3 halogen bulb) • Diamond pattern reflector • Includes: wiring harness, LED switch, relay, and heavy gauge wires • Lens size: 3-1/2" 99 8003432 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . .

HALOGEN WORK LIGHT • 4" x 6" dimensions • Dual halogen H3 bulbs • 55 W, 12 VDC 8024853 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . . . .

• 5" x 3" lens, 55W • Plastic stone guard • Includes switch, wiring, and mounting hardware 4250151 – Wt. 2.1 lbs. . . . . . . . . . . . .

2999/set

5" RUBBER WORK LIGHT

3499 with MAGNETIC BASE

REPLACEMENT HALOGEN BULB

• Standard H3 55 watt halogen • Power supply adapter with replacement bulb 12-1/2 ft. cord • Fits most tractor lamps, utility and work lights, • 3,000 candlepower, 35W automotive auxiliary lights etc. 99 8067415 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . 8005402 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2499

373

AUXILARY LIGHTING

11 Truck & Trailer

7/24/08

10:57 AM

TRACTOR LIGHTS

Page 374

RUBBER TRACTOR LIGHTS

• Sealed beam unit snaps into lamp body eliminating lens covers and hardware • Shock and vibration resistant • Adjustable mount for accurate aiming of lamp B • Complete with 4" wire pigtail for easy installation • H3 55 watt halogen bulb 5" DIA • Adjustable mount for accurate aiming of lamp 99 4251807 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . • Intensified beam pattern for brighter output 6" DIA • Shock and vibration resistant 99 4251815 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . • Easy installation, includes all hardware • For off road use only REPLACEMENT SEALED BEAMS A) FLOOD LAMP 5" DIA 4250161 – Wt. 1.1 lbs. 4254025 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . 8.99 B) SPOT LAMP 6" DIA 99 /ea. 4254033 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 9.99 4250162 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . A

16 19

LED AUTOMOTIVE BULBS

5" SPOT LIGHT SET with STONE GUARD

• High impact glass lens in a metal body • Chrome coated stone guard • 55W, H3 halogen bulbs • Includes plug in wiring harness with fuse holder 8006319 – Wt. 4.4 lbs. . . . . . . . . . . . . . . . . . . .

4999

• Replacement LED bulb for auto applications • LED bulbs last longer, provide brighter output than standard incandescent bulbs and draw less power in operation • 12VDC, 9 LED diodes Wt. 0.1 lbs.

12V AUTOMOTIVE BULBS 2 per pkg. Type #67 #194 #1895 #2057 #57 #3157 #3057 #1893 #1003

Colour Amber Red Clear

Wt. (lbs.) 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1

ITEM PRICE/pkg. 4210988 1.69 4210989 1.79 4210994 1.69 4210995 2.49 4210996 1.69 4210998 3.49 4210999 3.59 4211000 1.99 4211001 2.99

#1157 BASE 8063851 8063869 8063844

PRICE 6.99 6.99 9.99

12V AUTOMOTIVE BULBS

Wt. 0.1 lbs.

8107765 – #1156 8107773 – #1157 . . . . . . . . . . . . . . . . . . . . . . . . . .

129

INDUSTRIAL BACK-UP ALARM

SIREN

374

#1156 BASE 8063828 8063836 8063810

• 12-80 VDC • 97+/- 4 dB • Reverse polarity protected • Voltage spike and surge protected • Universal mounting maximizes • 6 tone alarm siren location options • Designed for car alarms but will work with any • Draws 150-350mA 12VDC alarm system 99 8104135 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . 8028662 – Wt. 0.9 lbs.

2499

11 Truck & Trailer

7/24/08

10:57 AM

Page 375

12V WINDSHIELD WASHER KIT

• 120 dB blast • 2 triple plated horns, 6" and 8-1/2" long • Air compressor operates on 12 VDC • Complete with universal relay, hardware, and instructions 99 8010341 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . . . .

• Push button dash switch • Includes wiring, nozzles, tubing, mounting bracket and instructions 99 2990321 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . .

SWITCHES

A) BLACK DUCKBILL TOGGLE SWITCH • 2 position (on/off) • Rated 16 amps @ 12 VDC • 2 blade terminal • SPST (Single pole, single throw) 99 8171829 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . B) BLACK PADDLE HANDLE MOMENTARY TOGGLE SWITCH • 2 position momentary (on/off) • Rated 20 amps @ 12 VDC • 2 blade terminal • SPST (Single pole, single throw) 49 8171779 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . C) BLACK PADDLE HANDLE TOGGLE SWITCH • 3 position (on/off/on) • Rated 20 amps @ 12 VDC • SPDT (single pole double throw) • 3 blade terminal 49 8171787 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . D) ILLUMINATED DUCKBILL TOGGLE SWITCHES • 2 position (on/off) • Switch lights up in "on" position • Rated 20 amps @ 12 VDC • 3 blade terminal • SPST (Single pole, single throw)

Wt. 0.1 lbs.

8171894 – RED (SHOWN) 8171902 – BLUE 8171910 – AMBER 99 8171936 – GREEN . . . . . . . . . . . . . . . . . . . . E) ILLUMINATED PADDLE HANDLE TOGGLE SWITCHES • 2 position (on/off) • Switch lights up in "on" position • Rated 20 amps @ 12 VDC • 3 blade terminal • SPST (Single pole, single throw)

Wt. 0.1 lbs.

8171837 – RED LENS (SHOWN) 8171852 – BLUE LENS . . . . . . . . . . . . . . . . F) ILLUMINATED ROCKER SWITCHES • 2 position (on /off) • Switch lights up in "on" position • Rated 16 amps @ 12 VDC • 3 blade terminal • SPST (Single pole, single throw)

299

G) HEAVY DUTY METAL BAT HANDLE TOGGLE SWITCH • 2 position (on/off) • Rated 25 amps @ 12 VDC • 2 screw terminal • SPST (Single pole, single throw) 8171944 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . H) BAT HANDLE TOGGLE SWITCH with INDICATOR LIGHT • 2 position (on/off) • LED indicator lights up in "on" position • Rated 20 amps @ 12 VDC • 3 blade terminal • SPST (Single pole, single throw) 8171860 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . I) EXTRA HEAVY DUTY TOGGLE PADDLE HANDLE TOGGLE SWITCH • 2 position (on/off) • Rated 35 amps @ 12 VDC • 2 screw terminal • SPST (Single pole, single throw) 4219374 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . J) 4-POSITION IGNITION SWITCH • Max 35 AMP rating • 4 positions: ACC-OFF-IGN/ACC-IGN-START • 4 screw terminals • Includes 2 keys 8205452 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

299

499

Wt. 0.1 lbs.

8171951 – RED LENS (SHOWN) 8171969 – AMBER LENS 8171977 – GREEN LENS 8206971 – BLUE LENS . . . . . . . . . . . . . . . .

AUXILIARY LIGHTING

DUAL TRUMPET AIR HORN

299

899

375

TRAILER & TOWING

11 Truck & Trailer

7/24/08

11:01 AM

Page 376

FUSES

A B A) 5 PK GLASS FUSES Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Size ITEM Size AGC 3A 8131435 AGC 20A AGC 5A 8131443 AGC 30A AGC 15A 8131450 SFE 20A

149/pkg. ITEM 8131468 8131484 8131492

C) 5 PK ATC FUSES B) 5 PK ATM FUSES 59 49 /pkg. Wt. 0.1 lbs. . . . /pkg. Wt. 0.1 lbs. . . . Size Colour ITEM Size Colour ITEM 10A red 8131500 10A red 8131583 15A blue 8131518 15A blue 8131591 20A yellow 8131559 20A yellow 8131609 25A clear 8131567 25A clear 8131617 30A green 8131575 30A green 8131633

IN-LINE FUSE HOLDERS

F G A) FOR UP TO 20 AMP GLASS FUSES 14-gauge wire. 8138232 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . B) FOR UP TO 30 AMP GLASS FUSES 12-gauge wire. 8138240 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . C) HEAVY DUTY ATO/ATC FUSE HOLDER Use with 25 or 30 amp fuses. 8138257 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . D) HEAVY DUTY ATO/ATC FUSE HOLDER Rated at 30 amps max. 8138265 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

D D) ASSORTED ATC FUSE KITS 6 PC 5, 10, 15, 20, 25, and 30 amp. 8131658 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . 6 PC KIT WITH FUSE PULLER 5, 10, 15, 20, 25, and 30 amp. 8131666 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . 80 PC KIT 10 each of sizes: 3, 5, 7-1/2, 10, 15, 20, 25, and 30 amp. 8131674 – Wt. 0.4 lbs. . . . . . . . . . . . . . . E) MAX. FUSES Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Size ITEM Size 2 pc 20A 8136285 2 pc 50A 2 pc 30A 8136293 2 pc 60A 2 pc 40A 8136327 2 pc 70A

299/pkg. 399/pkg.

2299/pkg. 299/pkg. ITEM 8136335 8136343 8136350

LIGHT UP ATC FUSE KITS • Fuses light up when blown • Fuse puller included H 17 PC KIT Includes 2 x 5 amp, 2 x 10 amp, 3 x 15 amp, 4 x 20 99 99 amp, 3 x 25 amp, and 2 x 30 amp ATC fuses. 8005147 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . 43 PC KIT Includes 7 of each ATC fuse: 5, 10, 15, 20, 25, 99 and 30 amp. 99 8005148 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

FLASHERS

199

BATTERY, BULB and FUSE TESTER

2 to 6 BULBS/CIRCUITS • Rated 12.8 amps @ 12 VDC • 2 blade terminal 8172710 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . • Tests “AAA”, “AA”, 1 to 10 BULBS/CIRCUITS “C”, “D”, 9V and button cell batteries • Rated 20.0 amps @ 12 VDC • Tests automotive bulbs, glass and blade type • 2 blade terminal fuses 99 8172744 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 8123721 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

FUSE BLOCK

ATC FUSE PANEL

Bussmann®

376

• 4 pole breakaway design • Use with AGC fuses

• Holds 6 ATC fuses • 6 circuits rated 30 amps each • Quick connect spade terminals

Wt. 0.1 lbs.

8096372 . . . . . . . . . . . .

499

8138224 . . . . . . . . . . . .

199 599

STUD TYPE CIRCUIT BREAKERS • 6-24 volt • Automatic reset • Threaded stud type Wt. 0.1 lbs.

1199

8138836 – 20 amp . . . . . . . . . 8138844 – 30 amp . . . . . . . . . . 8198780 – 40 amp . . . . . . . . . 8198798 – 50 amp . . . . . . . . .

4.49 4.99 5.49 5.99

11 Truck & Trailer

7/24/08

11:01 AM

Page 377

AUTOMOTIVE ACCESSORIES

INDICATOR/WARNING LIGHTS Snap-mount into 1/2" dia. hole of mounting panel. Wt. 0.1 lbs.

8172728 – AMBER LENS 8171993 – RED LENS 8172009 – BLUE LENS 8172736 – GREEN LENS . . . . . . . . . . . . . . . . . . . . . . . .

199/ea.

15W SOLAR PANEL with 7A CHARGE CONTROLLER SOLAR PANEL: • Works in all weather conditions • Ultra bright blue LED provides charging indication • Built-in blocking diode protects battery discharge at night • Temperature range: -40°C to 80°C (-40°F to 176°F) • Max. output 15W 1A • Includes: pre cut holes for easy installation, 4 stainless steel screws, battery clamps, CLA adapter, 12 ft. wire 7A CHARGE CONTROLLER: • Protects battery from overcharge and discharge • For use with 12V solar panels and batteries only • Handles up to 7A of array current • Handles up to 100A of solar power • Maintains battery charge • Green light indicates full battery 8125155 – Wt. 14.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14999

BATTERY ACCESSORIES BATTERY MASTER SWITCHES

BATTERY MASTER CUT-OFF SWITCH

B Bussmann®

• Prevents battery drain when the vehicle is in storage • Key turns 90° to instantly disconnect battery • Removal of key deters theft • Rated amps: 100A continuous, 1,000A surge for 12V 50A continuous, 500A surge for 24V 99 8105033 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Attach to negative battery post • 1/4 turn of knob disconnects battery, preventing drain • Remove knob completely to prevent theft • Rated: 100 amps continuous, 600 amps cranking A) FOR TOP POST BATTERIES 99 4219184 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . B) FOR SIDE POST BATTERIES Included ATM-20 amp fuse can be installed for power bypass to equipment requiring continuous power, such as clocks, power locks, etc. 99 4210831 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

MARINE BATTERY TERMINALS • Lead body • Steel screw and wing nut with bronze plating • Allows quick disconnect of battery without tools • Also used to convert a top post battery terminal to a threaded stud connection 99 8064412 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . /pr.

BATTERY TERMINALS C) 2 PC ANTI-CORROSION BATTERY WASHERS Place on posts underneath battery clamps to prevent corrosion. 49/ 4213062 – Wt. 0.1 lbs. pkg. D) REPLACEMENT TERMINAL For side post batteries. 99 4270102 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . /ea. E) REPLACEMENT TERMINAL For top post batteries. 99 4270101 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . /ea.

1 1

C E

377

AUTOMOTIVE ACCESSORIES

11 Truck & Trailer

7/24/08

11:01 AM

ADJUSTABLE BATTERY HOLD DOWN

BATTERY POST SHIMS

Use as a replacement or to install an extra battery. 4210009 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

• Soft lead • Restores original size of corroded or over-cleaned battery posts • Fits either post 8064453 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

12V ADAPTERS

2 PC BATTERY TERMINAL PROTECTORS Red/black PVC protector. 8064420 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

WIRELESS REMOTE KITS B

• Works with any 12 VDC system • 4 independent channels for multiple accessories • 1 push for ON 1 push for OFF • Remote control activation of fog, driving and other lights, power accessories such as doors, windows and locks, or any other 12V powered accessory • 180 ft. max. range 99 8003441 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . DELUXE KIT Same kit as 8003441 except: Channel 1 & 2 - 1 push for ON 1 push for OFF Channel 3 & 4 - push & hold button for ON release button for OFF 99 8116279 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

C A) 12 VDC ADAPTER with BATTERY CLAMPS Runs power outlet socket directly off battery. 99 4220011 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . B) 12 VDC ADAPTER Power outlet extension. 99 4220012 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . C) WALL ADAPTER • Adapts 110 VAC to 12VDC • Great for charging cell phones or powering small auto accessories indoors etc. 99 8030640 – Wt. 1.2 lbs. . . . . . . . . . . . . . .

9 9

4 DR POWER DOOR LOCK WITH REMOTE OPENER

POWER DOOR LOCK KIT

• 12 VDC • Includes hardware and push rods for each set 1 LOCK KIT 1 pc 2-wire motor only. 99 8008425 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . 2 LOCK KIT Same as above but with one 5-wire and one 2-wire motor. 99 8008443 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . 4 LOCK KIT (PICTURED ABOVE) • 3 pc 2-wire motor • 1 pc 5-wire motor • 1 pc control module 99 8008434 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . .

378

Page 378

• 12 +/- 2V standby current • 7mA with 5 piece blade connectors • 1 piece gun type door lock actuator • 5 wire motor (12 VDC) • 3 piece gun type door look actuator • 2 wire motor (12 VDC) • 1 piece centre lock and remote control wire set • 1 piece remote controller • 2 piece transmitter (2 pin type) • 1 set mounting hardware with TR6220CA main module and TC3001C 2 pin transmitters with keychain 99 8204414 – Wt. 2.6 lbs. . . . . . . . . . . . . . . . . . . .

11 Truck & Trailer

7/24/08

11:01 AM

Page 379

FUEL GAUGE & SENDING UNIT

A B

A) FUEL LEVEL GAUGE • 12 VDC operation • 2-1/8" dia. case with light up dial • Includes mounting bracket and instructions 4230140 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

1999

B) FUEL LEVEL SENDING UNIT • 12 VDC operation • For use with 4230140 gauge • Fits fuel tanks from 5" to 23-1/2" deep • Complete mounting instructions included 4230157 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

1999

SPORT/PERFORMANCE TACHOMETERS C) 2" TACHOMETER • 0 to 8,000 RPM • Works on all 4, 6, and 8 cylinder engines • Can connect to dash light for brightness control • Mounts on or under dash • Mounting hardware and complete illustrated instructions included • 270° sweep 99 4230064 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . D) 2-1/2" TACHOMETER • 0 to 7,000 RPM • OEM type backlit illumination • Works on conventional or distributorless ignition systems 99 4230082 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . E) 4" TACHOMETER • 0 to 7,000 RPM • OEM type backlit illumination • Works on conventional or distributorless ignition systems 99 4230081 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

AUTOMOTIVE ACCESSORIES

GAUGES

C D E

F) 4" TACHOMETER • 0 to 10,000 RPM (with shift light) • OEM type backlit illumination • Works on conventional or distributorless ignition systems 4230083 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . .

6999

2" MECHANICAL CHROME GAUGES

G) AMMETER GAUGE 60-0-60 A. 4230062 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . H) OIL PRESSURE GAUGE 0 to 80 PSI (0 to 6 Kg/cm2). 8082158 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . I) WATER TEMPERATURE GAUGE 130°F to 280°F (54°C to 139°C). 4230063 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

799

899

1199

J J) MINI TRIPLE GAUGE SET • Compact 1-1/2" dia. dial face • Includes ammeter plus mechanical oil pressure and water temp. gauges • Includes mounting hardware 99 4230065 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . .

K K) TRIPLE GAUGE SET • 2" dia. dial face • Includes ammeter plus mechanical oil pressure and water temperature gauges 99 4230069 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . .

379

AUTOMOTIVE ACCESSORIES

11 Truck & Trailer

7/24/08

11:01 AM

ELECTRICAL PANEL GAUGES

Page 380

• 2" dia. face plate with 90° sweep • Backlit for illumination at night • Can connect to dash light for brightness control • Mount on, in, or under dash • Complete illustrated instructions included A) 8 to 16 VOLT VOLTMETER 99 4230059 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . B) ELECTRIC WATER TEMP 100° to 250°F. 99 4230061 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . C) ELECTRIC OIL PRESSURE 0 to 100 PSI. 99 4230060 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

A B

2" LED LIT GAUGES • 12 VDC • Adjustable 7 colour LED lighting • White face with 270° sweep • Plastic housing, metal flange with satin finish • Standard size for pillar pod mount locations or mounting plates MECHANICAL VACUUM GAUGE Vacuum range: 0 to 30 in-Hg. 99 8087462 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . MECHANICAL BOOST/VACUUM GAUGE Range: 0 to 30 in-Hg / 0 to 20 PSI. 99 8087470 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . .

21 22

ELECTRONIC VOLTMETER Volt range: 8 to 18V. 8087454 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . ELECTRONIC OIL TEMPERATURE GAUGE Temperature range: 100° to 340°F. 8087439 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . ELECTRONIC WATER TEMPERATURE GAUGE Temperature range: 100° to 300°F. 8087421 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . ELECTRONIC OIL PRESSURE GAUGE Pressure range: 0 to 100 PSI. 8087447 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . ELECTRONIC TACHOMETER 0 to 8,000 RPM. 8005752 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . .

2999 2999 2999 2999 2999

HOUR METER • 2" face • Operates on 6 to 50 VDC • Reads to 9,999 hour plus 1/10 hour indicator 8042851 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MECHANICAL OIL PRESSURE FITTING KIT

Includes: 1/8", 1/4" NPT adapters, and 72" nylon tubing. 4230075 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . .

3899

499

STEVEN O’BRIEN Date of birth: May 14,1974 Hair: Dark Brown Missing since: Mar 20,1993 Eyes: Brown Missing from: Charlottetown, PEI Characteristics: Wears glasses HAVE YOU SEEN THIS CHILD?

1-800-387-7962 A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

All Calls Confidential—No Name Required 380

11 Truck & Trailer

7/24/08

11:01 AM

Page 381

TRUCK ACCESSORIES

TRUCK ACCESSORIES LOADING RAMPS 6 FT STEEL RAMP • Capacity in pairs: 1,600 lbs. • Ramps measure: 12-1/4" x 72" • 4" spacing between braces to allow for easy loading of small tire lawn/garden tractors, snowblowers, ATVs • Includes cargo strap 99 4270107 – Wt. 49.1 lbs./pair . . . . . .

144

7 FT STEEL FOLDING RAMP • Capacity in pairs: 1,400 lbs. • Ramps measure: 12-1/4" x 84" • Ramps fold in half for easy transportation • Ramps arch at the top to prevent lawnmowers or snowblowers from getting hung up 8006098 – Wt. 70.2 lbs./pair . . . . . .

17499

2-IN-1 STEEL LOADING RAMPS

RAMPS FOLDED • Dual use as loading ramps and drive-up vehicle ramps • Open as a loading ramp set: 5,00lb per each piece, 1,000 lb. per pair • Folded as car ramp set: 2,500 lb. per each piece, 5,000 lb. per pair 8176927 – Wt. 65.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

STEEL LOADING RAMPS

• 1,000 lbs. cap. • 72" long x 9" wide x 2" deep • No-slip tread 8176919 – Wt. 39.6 lbs. . . . . . . . . . . . . . . . . . .

12999

2 PC STEEL TRAILER LOADING RAMP

• 16W x 46L each • 1,000 lbs. cap. per pair • Small and economic ramps • Plastic-coated anti-skid fingers to protect trailer finish • Safety straps included to secure the ramps in place 99 • Powder-coated finish 99 8178196 – Wt. 27.6 lbs. . . . . . . . . . . . . . . . . . .

PRINCESS AUTO CARRIES A WIDE SELECTION OF THE FOLLOWING: • Gas engines • Shop equipment • 2500 Surplus items • Pressure washers • Hydraulics • Air tools and accessories • Air compressors • Tires/casters/wheels

• Trailer components & accessories • Electric Motors • Safety products • Welding equipment • Hand tools • Power tools • Sandblasters • Winches/hoists

For a complete list of our products, download our full catalogue or our sale flyer in PDF format from our website: www.princessauto.com

381

TRUCK ACCESSORIES

11 Truck & Trailer

7/24/08

11:01 AM

1,000 LB CAPACITY STEEL RAMP

Page 382

500 LB CAPACITY SINGLE ARCHED STEEL RAMP

• Cap. in pairs:1,000 lbs. • Includes two galvanized steel ramps 6 ft. long by 9" wide • 7 ft. x 11" • For easy loading of ATVs, • 1,000 lb. cap. when used in pairs dirt bikes, snowblowers etc. onto truck beds • Arched ramp to prevent lawnmowers or • Includes 2 angle brackets and hardware snowblowers from getting hung up 99 8052524 – Wt. 42.6 lbs. . . . . . . . . . . . . . . . . . . . • Folds for easy storage • Side handles for carrying • Powder coat finish ALUMINUM LOADING 8086233 – Wt. 33.3 lbs. . . . . . . . . . . . . . . . .

7499/ea.

RAMP PLATE

• Mounting holes 6" centres • To be used with 2" x 8" planks with carriage bolts and nuts (not included) • O’all dim.: 7-1/2" x 10-1/2" • Sold individually 350 LB CAP 3/16" polished aluminum deck plate. 8021393 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . 750 LB CAP 1/4" polished aluminum deck plate. 8005828 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . .

8" STEEL LOADING RAMP PLATE

1299 18

• 2" x 8" or 2" x 12" lumber required • Cap.: 1,500 lb. per pair, 750 lb. each 99 • Sold individually 8125056 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . .

1199

TRIFOLD ALUMINUM RAMPS

A • 1,500 lb. cap. • Folds to store between ATV wheels in truck • Heavy duty riveted rung construction • Raised edges work as a guide for wheels • Ideal for loading ATVs, motorcycles, lawn tractors, golf carts, etc. 45"W x 69"L 99 8002666 – Wt. 43.5 lbs. . . . . . . . . . . . . . . 50"W x 77"L 99 8002597 – Wt. 44.2 lbs. . . . . . . . . . . . . . .

164 199

8 FT FOLDING UTILITY RAMP KIT • 600 lb. cap. • Use 2 pcs of 3/4" plywood (not included) to customize to desired width, up to 48" • Galvanized steel • Folding design allows for compact storage • Designed for 24" of lift • Ideal for wheelchairs, scooters, strollers, walking, or cargo 99 8118234 – Wt. 25.6 lbs. . . . . . . . . . . . . . . . . . . . .

TAILGATE NETS 382

• Black polyester • For full size trucks 8064255 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

1999

11 Truck & Trailer

7/24/08

11:01 AM

TRUCK UNLOADER

• Works with most bedliners • Attaches to standard threaded broom handle etc. to clean the grooves of the liner • Faster and easier to use than a hose or floor broom 99 LOAD HANDLER PICKUP TRUCK UNLOADER 8196016 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . • Universal full-size fit • Unload pickup in 30 seconds • Easy installation, no drilling or cutting • One way conveyor belt attaches to tailgate LOCKING TRANSPORT BOX 2,000 LBS. CAP. 8179343 – Wt. 19.9 lbs. . . . . . . . . . . . .

TRUCK ACCESSORIES

UNIVERSAL TRUCK BEDLINER RAKE

Page 383

11999

UNDERBODY BOXES

• Ideal for storing large tools such as chain saws, winches and other cargo • 2 gas springs lid lifts to assist in opening and closing • Dual locks with key • 36-1/4" x 17-3/4" x 18" • Steel construction 99 8104630 – Wt. 88.6 lbs. . . . . . . . . . . . .

299

• 14-gauge steel construction with 12-gauge steel door, black powder coat finish • Flush mount beveled door to shed water away from opening, aircraft cable-style door checks • Stainless steel continuous hinge • Stainless steel locking T-handle latch Size Wt. (lbs.) ITEM PRICE 18" x 18" x 36" 95.0 4280035 329.99 18" x 18" x 48" 122.0 4280036 399.99

1,000 LB PICK-UP TRUCK CRANE

• Stationary swivel boom rotates 360° • Lifts 500 lb. when boom extended, 1,000 lb. when boom retracted • Max. boom length: 53-1/2" • Max. boom height: 80" from base • 3 ton hydraulic jack • 25 ft. long winch cable • Base dimensions : 7-3/8" x 9-1/2" 99 8169419 – Wt. 94.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .

179

TECH TIP Truck bed cranes were never intended to lift and/or support people. Truck bed cranes should also not be used for overhead lifting. Always maintain a safe standing position when lifting to prevent injuries if a load should slip.

383

WINCHES

11 Truck & Trailer

7/24/08

11:01 AM

Page 384

12 VOLT WINCHES BY GP SERIES

• Circuit breaker protected • Mechanical and dynamic brake • Powers load in and out • Solenoid type relays sealed against the elements • 15 ft. handheld remote • Freewheel • Cable tension plate avoids loose wire rope spool • 50 ft. wire rope with latch hook • Includes roller fairlead and pulley block

Rated Line Motor No Load Cable No Load O’all Dim. Wt. ITEM PRICE Pull (lbs.) (HP) Draw (dia. x l) Line Speed (L x D x H) (lbs.) GP3000 3,000 1.1 15 amp 3/16" x 50 ft. 12 FPM 12.7" x 4.36" x 4.5" 25.7 8002863 449.99 Model

S SERIES

A PULLEY BLOCK DOUBLES THE CAPACITY OF ANY WINCH • Circuit breaker protected • Mechanical and dynamic brake • Roller fairlead • Powers load in and out • Heavy duty handheld 30 ft. remote switch • Solenoid type relays sealed against the elements • All weather motor and integrated solenoid cover • Transparent hinged wire rope guard • Freewheel • Cable tension plate avoids loose wire rope spool • Includes wire rope and latch hook

Rated Line Motor No Load Cable No Load O’all Dim. Wt. ITEM PRICE Pull (lbs.) (HP) Draw (dia. x ft.) Line Speed (L x D x H) (lbs.) S4000 4,000 1.8 30 amp 7/32" x 60 32 FPM 15.1" x 8.7" x 6" 34.7 8002705 499.99 S5000 5,000 2.1 36 amp 1/4" x 50 31 FPM 15.1" x 8.7" x 6" 36.2 8002940 549.99

Model

WIRELESS WINCH REMOTE • Fits all GP Units, S4000, S5000, all EP and EPI units • Fits Superwinch solenoid models with a 7-pin connector • Signal recognition up to 150 ft. • Includes: utility winch wireless control, antenna, 2 remote transmitters, winch wire harness and hardware kit 99 8081333 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

159

EP SERIES

• Mechanical and dynamic automatic full load holding brake • Powers load in and out • Integrated heavy duty sealed contactors • Efficient all metal 3-stage planetary gearbox Rated Line Motor No Load Cable Pull (lbs.) (HP) Draw (dia. x ft.) EPi 9,000 4.6 33 amp 21/64" x 125 EP12.5 12,500 5.6 55 amp 3/8" x 125 EP16.5 16,500 5.6 63 amp 7/16" x 90 EPi model includes pulley block Model

No Load O’all Dim. Wt. ITEM PRICE Line Speed (L x D x H) (lbs.) 47.1 FPM 23.35" x 6.26" x 7.13"114.5 8004616 799.99 34.9 FPM 26.5" x 8.5" x 11.2" 151.5 8052631 1199.99 28.4 FPM 26.5" x 8.5" x 11.2" 156.7 8094898 1399.99

MOUNTING BRACKET for 8004616, 8052631, 8094898 Designed to mount the EP9.0, EP12.5 and EP16.5 winches in a foot-forward orientation for maximum pulling capability. 8095234 – Wt. 47.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

384

• 15 ft. handheld remote • Freewheel • Wire rope with thimble and latch hook • Includes roller fairlead

13999

A winch is never to be used to move or lift people, used as a vertical hoist, or used to suspend a load.

11 Truck & Trailer

7/24/08

11:01 AM

Page 385

• New center drum design • Power in and power out • Mechanical load holding and dynamic brake • Full metal, 3-stage planetary gear-train • Cam action freespooling clutch • High efficiency, low amp draw, sealed permanent magnet motor • Circuit breaker protected • Weather sealed solenoid contactor • 4-Way roller fairlead • Heavy duty latched hook with thimble

WINCHES

ATV SERIES

Rated Line Motor No Load Cable No Load O’all Dim. Wt. ITEM PRICE Pull (lbs.) (HP) Draw (dia. x ft.) Line Speed (L x D x H) (lbs.) ATV3000 3,000 1.5 14 amp 3/16" x 50 18.0 FPM 12.6" x 4.7" x 4.7" 25.8 8176190 329.99 Model

WIRELESS WINCH REMOTE • Fits all Superwinch ATV series winches • Instant “ON” and “OFF” for immediate control • Signal recognition up to 150 ft. • Compact shielded antenna for easy remote mounting • Plug and play components ensure quick installation • Sealed tough and tight for all conditions • Includes: power distribution module, antenna, and 2 remote transmitters 8081879 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13999

120 VAC SERIES • Operates on standard house current • Circuit breaker protected • Mechanical and dynamic brake • Powers load in and out • 6 ft. handheld remote • Cable tension plate avoids loose wire rope spool Model AC1000

5:1 SAFETY FACTOR

Rated Line Motor No Load Cable No Load O’all Dim. Wt. ITEM PRICE Pull (lbs.) (HP) Draw (dia. x ft.) Line Speed (L x D x H) (lbs.) 1,000 0.6 3 amp 5/32" x 45 23 FPM 13.38" x 5.38" x 5.69" 19.3 1530997 499.99

• Operates on standard house current • 5:1 safety factor • Power in and power out • Full load mechanical brake • Wire rope tension, plate • 50 ft. 3/16" wire rope and 6 ft. handheld control included • 13.8 FPM @ no load Rated Line Motor No Load Cable No Load Pull (lbs.) (HP) Draw (dia. x ft.) Line Speed SAC1000 1000 0.6 4.3 3/16" x 50' 13.8 FPM Model

O’all Dim. (L x D x H) 15.25" x 5.9" x 6"

Wt. ITEM PRICE (lbs.) 26.5 1530044 499.99

HYDRAULIC PLANETARY SERIES IDEAL FOR CONTINUOUS DUTY! MODEL H8P, P/N 5050A • 8,000 lb. capacity • High speed all steel planetary gear train: 35 ft./min • Continuous duty rated • Can be rail or foot mounted • Rated at 2,200 PSI and 9 GPM • High torque SAE 2-bolt flange motor • Meets SAE J-706 standards • Brake is 50% of load holding • Compatible with closed centre valve system • Large cap. drum holds 113 ft. of 3/8" wire rope • O’all dim.: 22-3/4" x 8-1/4" x 9" 1550007 – Wt. 77.8 lbs. (less wire rope) . . . . . . . . . .

189999

SHOWN with OPTIONAL ROPE & FAIRLEAD

385

WINCHES

11 Truck & Trailer

7/24/08

11:01 AM

Page 386

CUSTOM MACHINED DRUM HEAVY DUTY PLANETARY POWER DRIVE • For use with sprocket or pulley • Drum is machined to 1-1/4" dia. with 3/8" keyway and key • 2,000 lb. single line capacity • 1.3 HP / 12VDC motor • Switch and wiring sold separately 99 1530807 – Wt. 13.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

WINCH ACCESSORIES CLASS III WINCH MOUNT

WINCH INSTALLATION STAND

Use to mount fairlead to winch (not required for bumper-mounted fairlead). 8046848 – Wt. 24.2 lbs. . . . . . . . . . . . . . . . . . . . .

4999

WINCH CABLE with HOOK

3/16" WINCH CABLE • Breaking strength: 4,000 lbs. • Safe working load: 2,000 lbs. 25 FT 3820028 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . 50 FT 3820029 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . 100 FT 3820030 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . . . 50 FT x 1/4" WINCH CABLE • Breaking strength: 6,900 lbs. • Safe working load: 3,450 lbs. 3820033 – Wt. 5.4 lbs. . . . . . . . . . . . . . . . . . . . .

• 5,000 lbs. max. capacity • Fits into 2" receiver • Weather-resistant powder coat finish • Includes pin and clip 8125049 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . . .

1999

ROLLER FAIRLEADS

1299 1899 2399 19

2,000 LB ROLLER FAIRLEAD 8002721 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . 2,000 LB CHROME ROLLER FAIRLEAD 8005299 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . 5,000 LB ROLLER FAIRLEAD 8005300 – Wt. 7.0 lbs. . . . . . . . . . . . . . . . . . . . . 8,000 LB ROLLER FAIRLEAD 99 8001393 – Wt. 9.0 lbs. . . . . . . . . . . . . . . . . . . . .

ACCESSORIES

3499 3699 3999 4999

PULLEY BLOCKS • Uses mechanical advantage to double the capacity of any winch • Can also be used to change pulling direction without damaging cable Vert. Cap.

Horiz. Cap.

A 1,760 lbs. B 4,000 lbs. C 8,000 lbs.

4,000 lbs. 8,000 lbs. 16,000 lbs.

Pulley Dia. 2-1/4" 2-1/4" 4"

Max. Cable O’all Dim. Size 3/16" 7" x 2-1/2" x 1-1/2" 7/32" 7" x 3" x 1-1/4" 5/16" 9" x 4" x 1-3/4"

Wt. (lbs.) ITEM PRICE 1.7 8058539 7.99 1.1 3800047 9.99 4.3 3800046 19.99

HAND WINCHES HAND WINCHES • All winches zinc plated • Freewheeling position

386

Load Cap. (lbs.) 800 1,200 1,400 1,800 2,500

Reel Cap. 40 ft. x 3/16" 30 ft. x 5/16" 30 ft. x 5/16" 58 ft. x 5/16" 30 ft. x 7/16"

Wt. (lbs.) Single speed 4.2 Single speed/ reversible 5.9 Single speed/ reversible 7.7 2-speed/ reversible 9.5 2-speed/ reversible 9.5 Type

ITEM PRICE 8004698 8004700 8004702 8004703 8004705

26.99 29.99 34.99 39.99 47.99

11 Truck & Trailer

7/24/08

11:05 AM

Page 387

• Features self-activating automatic brake system • Positive holding action of the brake system while raising and lowering loads provide the needed control for safety Load Capacity 1,500 lbs

Gear Ratio 5.1:1

Cable Size 1/4" x 88 ft.

Wt. (lbs.) ITEM 13.2 1510080

PRICE 99.99

WINCHES

AUTOMATIC BRAKE HAND WINCHES

2-SPEED HAND WINCHES WITH HAND BRAKE Simply press locking lever and shift handle from side to side to change gears or free spool (handle will not spin in free spool position). Cap. Gear Reel Cap. (lbs.) Ratios 2,800 5.1:1 & 14.7:1 94 ft. x 1/4", 62 ft. x 5/16" 3,200 5.1:1 & 14.7:1 94 ft. x 1/4", 62 ft. x 5/16"

HAND WINCH with STRAP

Wt. (lbs.) ITEM PRICE 17.1 1510270 119.99 18.2 1510163 129.99

1,400 LB HAND WINCH

• 2" x 23 ft. strap with hook • Reversible ratchet 1,000 LBS. 8004714 – Wt. 7.1 lbs . . . . . . . . . . . . . . . . . . . . . 2,000 LBS. 2-SPEED 8004715 – Wt. 11.8 lbs . . . . . . . . . . . . . . . . . . . .

4499 5899

• Includes forged hook and 20 ft. nylon strap • Ideal boat winch 99 1510002 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . . . .

2,000 LB WORM GEAR WINCH

10,000 LB TOW HOOK

• 41:1 gear ratio • Self-braking for applications requiring a positive mechanism • Load will remain in place when handle is released • Heat treated alloy steel worm gears • Thrust bearings reduce friction and provide longer winch life Includes mounting bolts and • Reel capacity: 140 ft. x 1/8", 64 ft. x 3/16", 34 ft. x 1/4" 99 safety catch. 1510155 – Wt. 9.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8002273 – Wt. 2.1 lbs. . . . .

1099

HAND WINCH STRAPS B A

Size A B A B C

2" x 15 ft. 2" x 15 ft. 2" x 25 ft. 2" x 25 ft. 2" x 27 ft.

Safe Working Load 1,100 lbs. 1,100 lbs. 1,100 lbs. 1,100 lbs. 1,650 lbs.

Breaking Strength 3,300 lbs. 3,300 lbs. 3,300 lbs. 3,300 lbs. 5,000 lbs.

Wt. (lbs.) 1.2 1.2 1.6 1.7 2.0

ITEM

PRICE

8170649 8170664 8170755 8170763 8170789

9.99 9.99 11.99 11.99 15.99

387

TIE DOWNS & ACCESSORIES

11 Truck & Trailer

7/24/08

11:05 AM

TREE SAVER WINCH STRAP

Page 388

HEAVY DUTY TREE SAVER WINCH STRAP

• 2" x 6 ft. long • Designed to protect trees during self recovery • 3,000 lb. safe working load • 9,000 lb. breaking strength 8016620 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• Designed to protect trees during self recovery and towing • 5,000 lb. safe working load, 15,000 lb. breaking strength • 4" wide x 6 ft. long 99 8021419 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

1999

TOW ROPE

TOW ROPES & STRAPS RECOVERY STRAPS

Wt. Dia. Length Capacity (lbs.) ITEM PRICE 7/8" 14 ft. 8,500 lbs. 2.8 8020429 12.99

TOW STRAP

Polyester webbing.

Breaking Safe Wt. Length Strength Working (lbs.) ITEM PRICE (lbs.) Load Polyester strap with 4" x 5,000 4.2 8096778 26.99 forged alloy steel hooks. 25 ft. 15,000 lbs. Wt. 3" x 6,500 6.0 Size Capacity (lbs.) 8096786 36.99 30 ft. 20,000 lbs. 6" x 30 ft.

55,000

18,000 15.9 8107120 99.99 lbs.

2" x 15 ft. 8,500 lbs.

2.0

ITEM

PRICE

8021785

19.99

TOW STRAPS

RECOVERY STRAPS

• White nylon webbing • Reinforced inserts sewn into loops to reduce wear and abrasion Length

Capacity

1" x 15 ft. 2" x 20 ft. 2" x 30 ft. 3" x 20 ft. 3" x 30 ft. 4" x 30 ft. 6" x 30 ft.

7,500 lbs. 18,000 lbs. 18,000 lbs. 27,000 lbs. 27,000 lbs. 35,000 lbs. 55,000 lbs.

Wt. (lbs.) 1.1 2.5 3.5 3.9 5.4 7.7 11.3

ITEM 8020946 8020973 8021847 8021026 8021865 8021874 8021892

With grab hooks. Breaking Safe Wt. Length Strength Working (lbs.) ITEM PRICE (lbs.) Load 1-3/4" x 8,000 2,600 2.6 8002111 13.99 15 ft. lbs. 1-3/4" x 5,000 1,660 3.3 8040289 19.99 25 ft. lbs. 2" x 3,300 PRICE 2.6 1740001 24.99 20 ft. 10,000 lbs. 19.99 35.99 GRADE 70 TRANSPORT CHAIN 49.99 54.99 64.99 89.99 124.99

18,000 LB TOW STRAP with CHAINS

388

3" x 25 ft. long strap. 8020982 – Wt. 11.6 lbs. . . . . . . . . . . . . . . . . . . .

• D.O.T. approved • Chromate gold • 5/16" maximum working load limit: 4,700 lbs. • 3/8" maximum working load limit: 6,600 lbs.

Size Wt. (lbs.) 5/16" x 15 ft. 14.2 5/16" x 20 ft. 19.2 3/8" x 15 ft. 21.3 99 3/8" x 20 ft. 27.9

ITEM 8169666 8169674 8169690 8169708

PRICE 39.99 47.99 49.99 59.99

11 Truck & Trailer

7/24/08

11:05 AM

Page 389

TIE-DOWN RINGS B

C D

E G

Style A B C D E F G

Capacity 1,200 lbs. 2,000 lbs. 1,200 lbs. 1,200 lbs. 1,200 lbs. 11,000 lbs. 18,000 lbs.

Opening Width O’all Dim. Wt. (lbs.) 1" 2-3/4" x 1-1/2" 0.1 2" 3-3/4" x 2-1/2" 0.2 3/4" 2" x 1-1/2" x 1-1/2" 0.2 1-5/8" 4" x 4" 0.3 1-3/4" 5-3/4" x 4" 0.9 2-1/4" 3-1/4" x 4-1/2" 0.9 3" 5" x 4-1/2" 2.4

349/ea.

1/2" REMOVABLE ANCHOR POINT

8020722 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2 PC PICK-UP CLEAT ANCHOR

PRICE 2.99/ea. 2.99/ea. 3.99/ea. 3.49/ea. 3.99/ea. 6.99/ea. 12.99/ea.

HEAVY DUTY RECESSED ROPE RING KIT

RECESSED TIE DOWN RING

• Cap.: 1,200 lbs. • Opening: 1-7/8" • O’all dim.: 5" x 3-1/2" 3809761 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

ITEM 8021598 8020937 8020759 8021614 8020811 8021623 8074254

TIE DOWNS & ACCESSORIES

ANCHORS & TIE DOWN RINGS

NOT FOR LIFTING

• Contains: rope ring, back support plate, 4 carriage bolts (3/8-16 x 2-1/4"), and 4 self-locking nuts (3/8-16 x 7/16") • Zinc-plated 99 • Formed 1/8" steel pan houses a ductile ring • 3-5/8" dia. hole with 7/8" clearance below surface is required • 6,000 lb. ultimate breaking strength • 2,000 lb. safe working load 8163057 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . RING ONLY 8163065 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

1199 499

PICK-UP

8040396 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

1299 MOUNTING CLAMPS

COMBINATION STAKE POCKET ANCHOR • Fits all pick-ups • Allows straps to be used or a rope to be looped around the anchor rather than threaded through a hole • 2,000 lb. cap., strongest stake pocket on the market 49 8164105 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

• For mounting aluminum and fibreglass truck caps and tonneau covers • No holes required 2-3/4" x 1"W x 2-1/2"H 8036899 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . 3-3/4" x 1-1/4"W x 3"H 8036907 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

499 899

389

TIE DOWNS & ACCESSORIES

11 Truck & Trailer

7/24/08

11:05 AM

2 PC FOLD-AWAY CLEATS

Page 390

2 PC TIE-DOWN ANCHOR

• Secure cargo on trucks, campers, RVs, boats, and trailers • Cleat folds down when not in use • Chrome plated • Fits into truck stake pockets • Mounting plate measures: 3-3/4" x 2-1/4" x 1/2" • Use with tie down straps to • Safe working load: 2,000 lbs. each secure cargo in truck box 99 3800126 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . 8040305 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

2" x 16" TIE DOWN RATCHETING E-TRACK STRAP

• 3,500 lb. cap. • With ratcheting logistic strap 8185696 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . .

E-TRACK BOARD HOLDER

2" x 16" E-TRACK TIE DOWN CAMBUCKLE

• 2,500 lb. cap. • Cam lock logistic strap 8185670 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . .

899

• Holds 2" x 4" and 2" x 6" lumber to keep cargo in place • Zinc plated 8208159 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . .

499

1-1/2" x 15 FT E-TRACK SNAP HOOK TIE DOWN STRAP

1299

2" x 8" E-TRACK TIE OFF STRAP

• 4,000 lb. cap. • Twisted snap hooks • Includes safety latch 8185662 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . .

1699

5 FT HORIZONTAL E-TRACK 4,000 lb. cap. 8185704 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . .

499

4 FT VERTICAL E-TRACK ANCHOR

• Provides easy attachment for interior trailer applications • Tracks can be attached with screws rivets or by welding 99 8191058 – Wt. 7.5 lbs. . . . . . . . . . . . . . . . . .

E-TRACK CLAMP

390

• Provides easy attachment for interior trailer applications • Tracks can be attached with screws rivets or by welding 99 For use with item 8191058. 8191066 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . 8191017 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . .

499

11 Truck & Trailer

7/24/08

11:05 AM

Page 391

4 PC RATCHET STRAPS • 5 ft. long, 2" wide • Safe working load: 400 lbs. • Breaking strength: 1,200 lbs. • Quick release over centre buckle 3809712 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . . • 1" x 15 ft. • Safe working load: 500 lbs. • Breaking strength: 1,500 lbs. • Ratchet lock holds straps tight and secure 8016675 – Wt. 4.3 lbs. . . . . . . . . . . . . . . . . . . . . .

1399

4 PC CAM STRAPS

1699

SLING • 2" x 6 ft. • 532 lb. safe working load • 1,580 lb. breaking strength 8040248 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

• 1" wide x 6 ft. long nylon webbing • Quick and easy thumb release • Safe working load: 300 lbs. • Breaking strength: 900 lbs. 99 • Cam lock holds straps tight and secure 8017497 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . .

TIE DOWNS & ACCESSORIES

2 PC TIE-DOWN STRAPS

RATCHETS & COMPONENTS

1599

4 PC CAM STRAPS • Quick and easy thumb release • 1" wide x 5-1/2 ft. long nylon webbing • Breaking strength: 900 lbs. • Safe working load: 300 lbs. • Cam lock holds straps tight and secure 8020492 – Wt. 3.0 lbs. . . . . . . . . . . . . . . . . . .

4 PC 2,000 LB CAPACITY RATCHET STRAPS

4 PC RATCHET STRAPS

• Length: 10 ft. • Breaking strength: 900 lbs. • Safe working load: 300 lbs. • Ratchet lock holds straps tight and secure 8022622 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . .

1799

1" x 6 ft. 8087595– Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . .

1899

2999

MOUNTABLE RATCHET STRAPS

ROPE RATCHET

• 3/8" x 8 ft. • Safe working load: 75 lbs. • Breaking strength: 250 lbs. 8020580 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .

• 2" x 4 ft. • Bolt on permanent mount • Safe working load: 1,000 lb. • Breaking strength: 3,000 lb. • Ideal for motorcycles, ATVs, and boat trailers 99 8171464 – Wt. 6.0 lbs. . . . . . . . . . . . . . . . . . .

6999

391

TIE DOWNS & ACCESSORIES

11 Truck & Trailer

7/24/08

11:05 AM

CAR TIE-DOWN RATCHET STRAP

Page 392

MOTORCYCLE TIE-DOWN

• 2" x 7 ft. • Safe working load: 1,650 lbs. • Breaking strength: 5,000 lbs. 8020679 – Wt. 3.1 lbs. . . . . . . . . . . . . . . . . . .

2799

TIRE STRAP ASSEMBLY & COMPONENTS

• 1" x 6 ft. • Safe working load: 250 lbs. • Breaking strength: 750 lbs. 8020633 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

799

2" x 24" AXLE STRAPS

A 8020704 – Safe working load: 1,650 lbs. Breaking strength: 5,000 lbs. Welded wire rings Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . 8096794 – Safe working load: 3,300 lbs. Breaking strength: 10,000 lbs. Delta ring on each end Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . .

B • Universal fit, adjustable tire strap • Includes ratchet with 2 safety snap hooks • Safe working load: 3,300 lbs. • Breaking strength: 10,000 lbs. 8073223 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . TIRE STRAP COMPONENTS A) TIRE STRAP with J-HOOK 8005423 – Wt. 2.8 lbs. . . . . . . . . . . . . . . . . . .

699 899

TRUCK/TRAILER TIE-DOWN ANCHOR KIT

4499 3499

B) STRAP with FLAT HOOK 2" x 18" 8021810 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . .

• Max. load: 500 lbs. • Adjusts from 2 ft. to 10 ft. • Quick release ratchet • Includes deck or wall mount clamps 99 8021106 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . .

TIE-DOWN CAM BUCKLE STRAPS

1999

D Safe Working Load 5 ft. N/R* C Cam Lock with Hooks 15 ft. 250 lbs. C Cam Lock with Hooks 10 ft. N/R* D Strap with Cam Lock *N/R - Not Rated: Light Duty Applications ONLY! Style

Length

Breaking Strength N/R* 750 lbs. N/R*

Wt. (lbs.) 0.2 1.0 0.2

ITEM

PRICE

8021482 8021437 8021491

4.99 10.99 4.99

RATCHET STRAP COMPONENTS E Type E Rubber coated hook F “J” Hook F “J” Hook

Strap Size 1" 1" 2"

Safe Working Load 250 lbs. 1,000 lbs. 1,600 lbs.

Breaking Strength 750 lbs. 3,000 lbs. 5,000 lbs.

Wt. (lbs.) 0.2 0.2 0.4

F ITEM PRICE 8021696 8021767 8021730

2.49 2.99 3.49

5,000 LB RATCHET & STRAP COMPONENTS H • Safe working load: 1,650 lbs. • Breaking strength: 5,000 lbs. • Straps are 2" wide

392

G) RATCHET Match ratchet G with strap H shown in chart. 8021721 – Wt. 2.0 lbs. . . . . . . . . . . . .

1599/ea.

Style Length Wt. (lbs.) ITEM PRICE 1.2 8021918 13.99 H “J” Hooks 15 ft. 1.9 8021927 18.99 H “J” Hooks 25 ft.

11 Truck & Trailer

7/24/08

11:05 AM

TRUCK BED CARGO NET

A B

• Fits truck beds up to 52" x 70" • 6" mesh with 22 hooks • Great for odd shaped loads 4220008 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . . . .

1699

CARGO BAR

Length 4-7/8" 6" 7-7/8" 4-1/2"

A B C D

Wt. (lbs.) 0.3 0.4 0.5 0.6

ITEM 4200358 4200366 4200374 4200165

PRICE 7.99 8.99 10.99 8.99/pr.

• Adjusts from 40" to 69" • Industrial threaded plug • Black rubber pads 4200189 – Wt. 3.3 lbs. . . . . . . . . . . . . . . . . . . . .

1199

TIE-DOWN RATCHET STRAP ASSEMBLIES

Style Length 15 ft. E 15 ft. E 15 ft. F 15 ft. F 25 ft. F 27 ft. G 30 ft. H

E Width 1" 1" 1" 2" 2" 2" 2"

F Safe Working Load 165 lbs. 400 lbs. 1,000 lbs. 1,650 lbs. 1,650 lbs. 3,300 lbs. 3,300 lbs.

G Breaking Strength 500 lbs. 1,200 lbs. 3,000 lbs. 5,000 lbs. 5,000 lbs. 10,000 lbs. 10,000 lbs.

TIE DOWNS & ACCESSORIES

RUBBER SAFETY HOOKS

Page 393

Wt. (lbs.) 0.9 1.2 1.6 3.4 3.9 5.1 5.7

ITEM PRICE 8021464 9.99 8021455 15.99 8020553 19.99 8020170 24.99 8021473 27.99 8022560 28.99 8021534 37.99

RATCHET TIE DOWN STRAPS J I

N Q

P Safe Working Load 15 ft. 1" 400 lbs. I 15 ft. 1" 500 lbs. J 15 ft. 2" 800 lbs. K 15 ft. 2" 800 lbs. L 15 ft. 1-1/16" 650 lbs. M* 15 ft. 1-1/2" 2,000 lbs. N 25 ft. 2" 3,300 lbs. O 27 ft. 2" 3,300 lbs. P 27 ft. 2" 3,300 lbs. Q 27 ft. 2" 3,300 lbs. R * Includes “J” hook and “D” ring Style

Length

Width

Breaking Strength 1,200 lbs. 1,500 lbs. 2,500 lbs. 2,500 lbs. 2,000 lbs. 6,000 lbs. 10,000 lbs. 10,000 lbs. 10,000 lbs. 10,000 lbs.

Wt. (lbs.) 1.1 0.7 2.4 1.7 1.7 2.8 4.7 6.8 6.9 10.1

ITEM

PRICE

8002102 8039968 8040081 8040073 8040024 8016639 8040040 8016648 8040057 8040065

5.79 7.99 12.99 11.99 12.99 19.99 24.99 25.99 25.99 49.99

393

TIE DOWNS & ACCESSORIES

11 Truck & Trailer

7/24/08

11:05 AM

Page 394

CAMBUCKLE TIE DOWN STRAPS

C B

A Style

Length

A B C

6 ft. 6 ft. 12 ft.

Working Width SafeLoad 1" 300 lbs. 1" 250 lbs. 2" 650 lbs.

Breaking Strength 900 lbs. 750 lbs. 2,000 lbs.

Type 2 “S” hooks 2 “S” hooks 2 “S” hooks

Wt. (lbs.) 0.8 1.5 1.8

ITEM

PRICE

8040115 8040446 8040131

5.99 8.99 11.99

RATCHET BUCKLES

LIGHT DUTY STRAPS

E • 3,650 lb. safe working load • 11,000 lb. breaking strength 2" SHORT HANDLE RATCHET 8040487 – Wt. 2.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . 2" MEDIUM HANDLE RATCHET 8040479 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . 2" LARGE HANDLE RATCHET 8040453 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . . . .

F Width: 1". Sty Length le D 9 ft. E 12 ft. F 10 ft. F 12 ft.

Buckle Wt. Type (lbs.) ITEM PRICE Nylon 0.1 8040404 1.99 Spring 0.2 8040412 2.99 Zinc 0.3 8040420 2.99 Zinc 0.3 8040438 3.99

4" DOUBLE “J” HOOK Safe working load: 3,660 lbs., breaking strength: 11,000 lbs. 8040545 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 799 799

RATCHET BUCKLES

Safe Breaking Wt. Size Working Strength (lbs.) ITEM PRICE Load (lbs.) 1" 580 lbs. 1,750 0.4 8040537 1.99 99 1-1/16"1,000 lbs. 3,000 0.8 8040529 2.99

CARGO WINCHES I

H I) 10,000 LB LASHING CARGO WINCH • Safe working load: 3,335 lbs. • Can be welded or bolted in place but has the quick release and operation of a ratchet 8020205 – Wt. 3.6 lbs. . . . . . . . . . . . . . . . . . . . G) TO H) • For use with 2", 3", or 4" webbing J) CHROME CARGO WINCH BAR • Meets requirements of DOT, CHP, Canadian • Knurled, no-slip handle with carbon-steel and proposed North American Cargo nosepiece Securement Standards, and WSTDA • Designed to tighten loadbinders 8045448 – Wt. 5.0 lbs. . . . . . . . . . . . . . . . . . . . . G) LOW PROFILE 15,000 LB WELD-ON CARGO WINCH K) 5,000 LB 2" MINI CARGO WINCH Breaking strength: 15,000 lbs., Safe working load: 1,660 lbs. safe working load: 5,000 lbs. 99 8020615 –Wt. 2.7 lbs. . . . . . . . . . . . . . . . . . . . . . . 8045297 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . L) 4" CARGO WINCH H) 15,000 LB WELD ON CARGO WINCH • Safe working load: 5,000 lbs., Breaking strength: 15,000 lbs., breaking strength: 15,000 lbs. safe working load: 5,000 lbs. 99 • Weld-on 8020198 – Wt. 9.5 lbs. . . . . . . . . . . . . . . . . . . . . 8040594 – Wt. 8.7 lbs. . . . . . . . . . . . . . . . . . . . . . G

1699 1999

394

1299

2199

11 Truck & Trailer

7/24/08

11:05 AM

Page 395

Size 2" x 20 ft. 2" x 30 ft. 3" x 30 ft. 4" x 30 ft.

Safe Working Load 3,300 lbs. 3,300 lbs. 5,000 lbs. 6,000 lbs.

Breaking Wt. Strength (lbs.) ITEM PRICE 10,000 lbs. 2.5 8170771 17.99 10,000 lbs. 3.4 8170797 19.99 15,000 lbs. 5.0 8170805 25.99 18,000 lbs. 6.1 8170813 29.99

CASTERS

CARGO WINCH STRAPS

CASTERS CASTERS

2" TWIN WHEEL CASTER

• 160 lb. cap. • 4" x 1-1/4" Wt. ITEM PRICE (lbs.) Swivel 1.8 2040109 10.99 Rigid 1.3 2040110 8.99

• Combines compact size and high load capacity • Swivel base makes pivoting easy • Hard rubber • 200 lb. capacity 8067860 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . .

899

GENERAL DUTY CASTERS Rubber wheel. Wheel Size 1-1/4" 1-1/2" 2" x 1" 3" x 13/16" 4" x 15/16" 4" x 1-1/4"

SWIVEL CASTER Load O’all ITEM PRICE Cap. Ht. (ea.) 50 lbs. 8001841 1.89 60 lbs. 8001869 2.59 125 lbs. 2-1/2" 8001840 2.69 110 lbs. 3-3/4" 8037199 6.49 115 lbs. 4-13/16" 8037215 8.99 300 lbs. 5" 2041150 11.99

RIGID CASTER PRICE (ea.) 8001832 1.59 8001850 1.89 8002046 2.49 8037206 5.99 8037224 7.99 2041168 9.99 ITEM

LIGHT/MEDIUM DUTY CASTERS • Use with dollies, trucks, bakery racks, portable files, tool boxes, display racks, and many other light duty applications • Double ball bearing raceway, self-lubricating bearing and corrosion resistant zinc finish SWIVEL CASTER RIGID CASTER WHEEL ONLY Load O’all PRICE ITEM PRICE Bore ITEM PRICE Wheel Size ITEM Cap. Ht. (ea.) (ea.) (ea.) 2-1/2" x 1-1/8" 175 lbs. 3-1/4" 2040008 4.99 2041143 4.49 – – – Above caster with side brake – – – – – 8037144 6.99 3" x 1-1/4" 210 lbs. 3-13/16" 8037153 7.99 8037162 6.99 3/8" 8039836 2.99 4" x 1-5/8" 255 lbs. 5" 8037171 14.99 8037180 11.99 7/16" 8006683 3.99

MEDIUM/HEAVY DUTY CASTERS

SWIVEL CASTER SWIVEL with BRAKE RIGID CASTER Wheel Load PRICE PRICE PRICE ITEM ITEM Size Cap. ITEM (ea.) (ea.) (ea.) 3" 130 lbs. 8073470 11.99 8073496 13.99 8073488 8.99 • Use with trash containers, stock carts, wire shelving, and other medium/heavy use • Corrosion resistant grey metallic finish • Double ball bearing raceway, roller bearing SWIVEL CASTER RIGID CASTER Wheel Load O’all Ht. PRICE PRICE ITEM ITEM Size Cap. (ea.) (ea.) 5" x 2" 1000 lbs. 6-1/2" 8005900 27.99 8039844 22.99 6" x 2" 1200 lbs. 7-1/4" 8005898 28.99 8039851 24.99

WHEEL ONLY PRICE ITEM (ea.) 3/4" 8005901 9.99 3/4" 8005903 11.99

BORE

395

CASTERS

11 Truck & Trailer

7/24/08

11:05 AM

Page 396

MEDIUM/HEAVY DUTY CASTERS WHITE NYLON CASTERS • Unbreakable under heavy loads, long life • Runs easy on smooth floors • Precision bearings contribute to an easy and quiet roll • Non-marking, resistant to oils, alkalis, soaps and detergents • Works well in wet environments • Dust-sealed SWIVEL CASTER SWIVEL with BRAKE RIGID CASTER Wheel Load PRICE PRICE PRICE ITEM ITEM Size Cap. ITEM (ea.) (ea.) (ea.) 4" 700 lbs. 8161788 34.99 8161804 39.99 8161812 31.99 PHENOLIC CASTERS • High impact, high strength wheels resistant to oil, gasoline, even dilute acids • 500 lb. heavy load cap.(8161457,8161440,8161465) • 840 lb. heavy load cap. (8161481,8161473,8161499) • Top plate is made with 1/4" forged cold steel • Wheel bearings are straight roller 3/4" with spanner bushings RIGID SWIVEL SWIVEL with BRAKE ITEM PRICE ITEM PRICE ITEM PRICE 4" 8161457 17.99 8161440 19.99 8161465 21.99 6" 8161481 19.99 8161473 21.99 8161499 23.99

THERMOPLASTIC RUBBER CASTERS • Unique thermoplastic rubber construction resists chemicals, caustics, oils, acids, and wear • Rugged polypropylene hub won’t dent, mar, fade, or stain • Ideal for shops, showrooms, sales floors, and hospitals • Non-marking, soft cushioned wheels SWIVEL CASTER CASTER with BRAKE Wheel Load Cap. O’all Ht. PRICE ITEM ITEM PRICE (ea.) Size (ea.) 3" 180 lbs. 4" 8113144 13.99 8113169 15.99 4" 250 lbs. 5" 8039869 15.99 8005917 18.99 5" 300 lbs. 6" 8039885 17.99 8005888 19.99 6" 550 lbs. 7" 8115248 21.99 8041121 22.99

• Blue Dyna-tred wheel • Tread width: 1-1/4" Wheel Load Cap. O’all Size Ht. 5" 330 lbs. 5-3/4"

8113151 8005921 8039893 8041147

(ea.)

11.99 13.99 16.99 18.99

Brake locks both wheel and swivel SWIVEL CASTER PRICE ITEM (ea.) 8005895 17.99

SWIVEL with BRAKE PRICE ITEM (ea.) 8005897 22.99

POLYAMIDE CASTERS • Reduces noise and transmitted vibration in distribution applications, without the high rolling resistance associated with other designs • Non-marking wheel • Roller bearings are protected by thread guards SWIVEL CASTER SWIVEL with BRAKE RIGID CASTER Wheel Load PRICE PRICE PRICE ITEM ITEM Size Cap. ITEM (ea.) (ea.) (ea.) 5" 450 lbs. 8161564 22.99 8161580 24.99 8161572 19.99

396

RIGID CASTER PRICE

ITEM

STEM CASTERS • Soft and smooth rolling thermoplastic wheel on polypropylene hub • Resists oil, acid, caustics, and chemicals • Won’t dent, mar, fade, stain • Approx. wt. 0.5 lbs. SWIVEL CASTER SWIVEL with BRAKE PRICE PRICE Wheel Size Load ITEM ITEM Cap. (ea.) (ea.) 2" x 13/16" 80 lbs. 8039901 4.99 8005919 5.99 3" x 13/16" 110 lbs. 8039919 5.99 8005920 6.99

RIGID CASTER PRICE ITEM (ea.) 8005889 15.99

11 Truck & Trailer

7/24/08

11:06 AM

Page 397

CASTERS

DYNATRED CASTERS • Thermoplastic rubber wheels • Load cap.: 180 lbs. SWIVEL CASTER SWIVEL with BRAKE RIGID CASTER O’all PRICE PRICE PRICE Wheel Size Height ITEM ITEM ITEM (ea.) (ea.) (ea.) 4" 5-1/4" 2040297 9.99 8165144 11.99 2040298 7.99 5" 6-3/8" 8165177 13.99 8165193 15.99 8165169 11.99

THREADED STEM SWIVEL CASTERS • Self-lubricating bearing • Soft rubber wheel • 1-1/2" long stem Wheel Size 2" x 7/8" 3" x 13/16" 4" x 15/16"

Stem Size 3/8" - 16 3/8" - 16 1/2" - 13

Load Cap. Wt. (lbs.) 80 lbs. 0.4 90 lbs. 0.6 115 lbs. 1.2

SWIVEL ITEM PRICE 2041176 3.59 2041184 4.89 2041192 6.59

SWIVEL with BRAKE ITEM PRICE 8161507 4.99 8161515 5.49 8161523 8.99

PRECISION BEARING CASTERS • Thermoplastic polyurethane wheel for high load capacity and extended wear • Protects floors and resists chemicals, caustics, acids and oils • Heavy gauge steel top plate • Corrosion resistant SWIVEL CASTER SWIVEL with BRAKE O’all Load Cap. PRICE PRICE Wheel Size Height ITEM ITEM (ea.) (ea.) 3" 4-3/4" 225 lb. 8074197 13.99 8074205 16.99 4" 5" 300 lb. 8161531 15.99 8161549 18.99

3" BLACK NYLON POLYURETHANE CASTERS

3" PRECISION BEARING THREADED STEM CASTERS

• Protects floors and resists chemicals, acids and oil • -40°F to 180°F • 3" polyurethane wheel • 225 lb. cap. • O’all height: 3-13/16" 8073231 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . WITH BRAKE 8073306 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .

RIGID CASTER PRICE (ea.) 8074213 12.99 8161556 14.99 ITEM

12 14

• 110 lb. cap. • 3" high by 7/8" wide wheel • Caster swivel plate • Black polyurethane (PU) wheel and black nylon fibreglass body • Plain bearing on the wheel • Will not rust and is washable • Ideal for display racks, food carts, office furniture and medical carts SWIVEL CASTER 99 8161879 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . . 99 SWIVEL with BRAKE CASTER 99 99 Top lock brake system. 8161895 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

6 7

3" THREADED STEM TOOLBOX CASTER • Hard rubber wheel with brake • Easy swiveling even under heavy loads • 250 lb. capacity 8073462 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1399

SINTERED IRON CASTERS SWIVEL CASTER Size Cap. O’all Ht. ITEM PRICE 2" x 7/8" 125 lbs. 2-1/2" 2040151 5.99 2-1/2" x 1" 175 lbs. 3-1/4" 2040153 8.99 3" x 1-1/8" 250 lbs. 3-3/4" 2040154 9.99

RIGID CASTER ITEM PRICE 2040155 4.99 2040156 7.99 2040157 8.99

397

CASTERS

11 Truck & Trailer

7/24/08

11:09 AM

Page 398

METAL CASTERS A

A A B C D

Wheel Load Cap. Size 2" 300 lbs. 3" 660 lbs. 4" 660 lbs. 6" 1,100 lbs. 8" 1,320 lbs.

O’all Ht. 3" 3-3/4" 5-1/2" 7" 9-1/2"

SWIVEL CASTER ITEM PRICE 2040295 4.99 2040286 8.99 2040255 17.99 2040258 21.99 2040260 24.99

RIGID CASTER ITEM PRICE 2040296 3.99 2040287 9.99 2040256 15.99 2040257 19.99 2040259 22.99

SEMI STEEL CASTERS Steel caster with polyurethane wheels. SWIVEL CASTER Wheel Load Cap. O’all Ht. PRICE ITEM Size (ea.) 6" 2,000 lbs. 7" 2040289 33.99 8" 3,000 lbs. 9" 2040292 39.99

SWIVEL with BRAKE

RIGID CASTER PRICE

ITEM

PRICE (ea.)

ITEM

2040288 2040291

35.99 41.99

2040290 2040294

(ea.)

31.99 37.99

SPECIALTY CASTERS 8" PNEUMATIC GATE CASTER with BRACKET

4" GATE SUPPORT CASTER

• Spring acts as a shock absorber when rolling on uneven terrain • Includes adjustable mounting bracket • Rubber wheel • 125 lb. cap. 8073314 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . . . .

LARGE PNEUMATIC CASTERS

• Spring acts as a shock absorber when rolling on uneven terrain • Includes adjustable mounting bracket • 2.80/2150 4-ply tire • 125 lb. cap. 99 8113086 – Wt. 7.8 lbs. . . . . . . . . . . . . . . . . . . .

3999

• Ball bearings on wheel and swivel • 4-ply rated air-filled tires • Top plate 4" x 4-1/2"

SWIVEL CASTER RIGID CASTER Tire Size Cap. O’all Ht. ITEM PRICE ITEM PRICE 2.50-4 300 lbs. 8" 2040115 29.99 2040116 27.99 3.50-4 350 lbs. 10" 2040113 29.99 2040114 27.99 4.10/3.50-4 350 lbs. 12" 2041291 47.99 2040063 42.99

398

SCAFFOLDING CASTER

3 WHEEL DOLLY

• 500 lb. safe rolling cap. • Hand or foot operated brake locks both swivel and wheel • O’all height: 9-1/2" from floor to base of stem • Long lasting 8" dia. x 2" vulcanized rubber wheel • Standard 1-3/8" dia. x 4" stem 99 2040254 – Wt. 13.0 lbs. . . . . . . . . . . . . . . . . . . .

Moves heavy objects easily. 6" DIA. 200 lb. cap. 8026520 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . 12" DIA. 300 lb. cap. 8073330 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . .

999

1999

11 Truck & Trailer

7/24/08

11:09 AM

Page 399

3 PC SNOWMOBILE DOLLY SET

• Ideal for cabinets, desks& office equipment • Keeps cabinets/desks levelled • Glides allow for easier movement when moving furniture • Bracket 3/8" threaded hole • Leveler glide 1-1/2" base with 3/8"-16 x 1-1/2" stem • Used on internal surface 49 8162695 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

• 990 lb. cap. • Ideal for moving snowmobile with ease for storage • Straps fix skis in place 8177040 – Wt. 11.4 lbs. . . . . . . . . . . . . . . . . . .

4999

ATV ACCESSORIES

LEVELER GLIDE and BRACKET KIT

ATV ACCESSORIES ATV BAGS B

A D

• Durable water resistant construction • Universal design fits most ATV's • Temp range: -20° to 60°C A) ATV TANK BAG 2 padded compartments. 8166761 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . B) ATV SADDLE BAG 2 zippered compartments. 8166712 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . .

1299 1299

D) ATV FENDER BAG 2 padded compartments with mesh pockets. 99 8166753 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . D) ATV COOLER SIDE PACK 1,300 cu. in. of storage space. 99 8166720 – Wt. 1.9 lbs. . . . . . . . . . . . . . . . . . E) DELUXE ATV FENDER BAG • Can be mounted on either front or rear fender • Mounts easily to rack and includes hooks to secure under fender • Includes 2 zippered compartments and insulated bottle holder with drawstring 99 8006412 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . . F) RECTANGULAR ATV BAG • 33" x 16" x 9" • 4,752 cu. in. of storage space 99 8166696 – Wt. 5.3 lbs. . . . . . . . . . . . . . . . . . G) ATV U-RACK REAR BAG 3,200 cu. in. of storage space. REGULAR 99 8166670 – Wt. 5.1 lbs. . . . . . . . . . . . . . . . . . WITH BOTTOM CUSHION 99 8166688 – Wt. 7.4 lbs. . . . . . . . . . . . . . . . . .

49 59

ATV REAR MOUNT RACK

ATV DROP BASKET

• Universal mount fits most ATVs • O’all dim.: 44" x 15" x 14" 8132664 – Wt. 48.5 lbs. . . . . . . . . . . . . .

14999

• Universal mount fits most ATVs • O’all dim.: 42" x 27" x 7" 8132672 – Wt. 36.4 lbs. . . . . . . . . . . . . . .

12499

399

ATV ACCESSORIES

11 Truck & Trailer

7/24/08

11:09 AM

ATV BASICS

Page 400

UNIVERSAL ATV REAR TOWING HITCH

• Cleaning and protecting your ATV • Accessorizing • Buying a quality ATV • Riding safely and properly • Basic troubleshooting and maintenance • Long-term storage • Tools and equipment 8187643 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . .

• Connects tow hooks or winch cables • Bolts to the rear trailer hitch using 3/4" ball shaft 8077547 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . .

1299

2299 HELMET BAG • Water resistant nylon • Lined to protect helmet • 11-1/2" x 15" base • 12-1/2" x 18-3/4" body 8172918 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . .

ATV DUST/STORAGE COVERS

1999

ATV/BOAT CUSHION • Cushion can be used as a back rest, or extra cushion for both ATVs and boats • Perfect extra cushion for sporting events 8006767 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . • Water repellent polyester construction is resistant to rot and mildew • Breathable material, allows heat and moisture to escape and will not freeze or stretch • Storage bag included • NOT FOR TRAILERING LARGE: Fits ATVs up to 75" x 50" x 40" Wt. 1.3 lbs. 8221152 – BLACK . . . . . . . . . . . . . . . . . . . . .

24 29

8221228 – CAMOUFLAGE . . . . . . . . . . . . . X-LARGE: Fits ATVs up to 85" x 50" x 40"

1299

ATV GAS CAN HOLDER

• Universal fit for easy installation • Mounts to rack or accessory rack extension • Fits 2 gallon (8 litre) gas can 99 99 8005849 – Wt. 4.9 lbs. . . . . . . . . . . . . . . . . . . 99

HANDLE BAR 3499 ATV 99 BRUSH GUARD . . . . . . . . . . . . . 39

Wt. 1.4 lbs. 8221160 – BLACK . . . . . . . . . . . . . . . . . . . . .

8221236 – CAMOUFLAGE

XX-LARGE: Fits ATVs up to 95" x 50" x 45" Wt. 1.5 lbs. 8221178 – BLACK . . . . . . . . . . . . . . . . . . . . .

8221244 – CAMOUFLAGE . . . . . . . . . . . . .

44 49

• Universal mount fits most ATVs • Steel construction protects hands while riding through the bush 99 99 8005848 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . /pr. 99

ATV CABIN

ATV MUFFS • Mounts on handlebar • Nylon fabric remains flexible in low temperatures • Helps keep hands warm • Adjustable string 8166746 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . .

1299/pr.

ATV RACK FLIP OVER BUCKET HOLDER

400

• Durable universal cabin provides shelter from poor weather conditions • Perfect for snowplowing and keeping out the rain • Clear windows, with zippered roll-up doors on either side • Rear vent to prevent fogging • Temp. range: -20°C to 60°C 99 8162778 – Wt. 17.6 lbs. . . . . . . . . . . . . . .

149

• Folds away when not in use • Multi-purpose carrier allows you to haul tools, feed, fishing, hunting, camping gear and more • Hauls three 5 gallon pails off the rear rack of your ATV (not included) 99 8189383 – Wt. 20.5 lbs. . . . . . . . . . . . . . . . .

11 Truck & Trailer

7/24/08

11:09 AM

Page 401

MARINE ACCESSORIES

MARINE ACCESSORIES MARINE FLUSHING ATTACHMENT

2" GALVANIZED

• Use with most DOCK RING inboard motors and outboard with side water inlet vents 2,000 lb. cap. 99 • For flushing cooling system and permits low 8164436 – Wt. 0.2 lbs. . . . . . . . idle speed of adjustment • Coated steel arms clamp suction caps ADJUSTABLE DRINK HOLDER securely to water intake valves • Use with standard garden hose 99 8102949 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . • Folds flat and out of the way when not in use • Easily mounts on to boats, 2 PC 4 FT TRANSOM atv's, automobiles etc. TIE-DOWN STRAPS • Has many uses 8164337 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . .

499

GALVANIZED DOCK CLEATS • 1,200 lb cap. • Over-centre style buckle locks tight and stays tight • For inboard or outboard application • Protective pad prevents scratching boat • Vinyl coated metal hooks 1" x 4 FT 8164428 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . 2" x 4 FT 8164311 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . .

6" CLEAT 8164378 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . 8" CLEAT 8164386 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . .

299 499

CHROME PLATED

1999 BOW EYE Includes mounting hardware. 1999 8164410 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . 699

8 OZ AIR HORN • Can be used for marine applications, sporting events, job sites, camping • Non flammable and ozone safe • Can be heard up to 1.6 km (1 mile) 8200396 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1899

ISAAC FLORES QUINTANA Date of birth: November 9, 1989 Hair: Dark Blond Eyes: Brown Missing since: February 18, 1995 Missing from: Toronto, ON Note: Warrant for Carmen Bermudez-Quintana (insert) Age enhanced to 6 years.

HAVE YOU SEEN THIS CHILD?

1-800-387-7962

A MISSING CHILD IS EVERYONE’S RESPONSIBILITY

All Calls Confidential—No Name Required 401

7/24/08

11:09 AM

Page 402

MOTORCYCLE COVERS

STD.

• Protect your motorcycle during all seasons from harsh weather, dirt and UV rays • Comes with handy storage bag STANDARD: Made of water repellent silver 200D Nylon. DELUXE (SHOWN): • Upper panel: 300D nylon with waterproof treatment and is scratch resistant • Lower panel: reinforced silver canvas Size MEDIUM: 80" x 47" x 36" LARGE: 90" x 49" x 39" X-LARGE: 97" x 50" x 41" MEDIUM: 84-1/4" x 47-1/4" x 32-1/2" LARGE: 105-1/2" x 42" x 40-1/2" X-LARGE: 108-1/2" x 44-1/2" x 43-3/4" XX-LARGE: 112" x 55" x 55" DELUXE

VEHICLE ACCESSORIES

11 Truck & Trailer

Wt. (lbs.) 1.7 1.9 2.1 3.1 4.1 4.4 5.2

ITEM 8169617 8169633 8169658 8169609 8169625 8169641 8179681

PRICE 24.99 27.99 29.99 49.99 59.99 69.99 79.99

XXL DELUXE MOTORCYCLE COVER with HEAT SHIELD • O’all dimensions - 112" x 55 "x 55" • Protect your motorcycle during all seasons from harsh weather, dirt and UV rays. • Made of water repellent 300D Polyester - silver coated • With heat-resistant lower liner • Comes with handy storage bag 8180564 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5999

CAR COVERS

FITS CARS UP TO 17-1/2 FT IN LENGTH 210" x 70" x 47" 8180721 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . . FITS CARS UP TO 18-3/4" FT IN LENGTH 8210429 – Wt. 4.8 lbs. . . . . . . . . . . . . . . . . . . .

3999 4299

TRUCK COVER

402

• Grey 80g/m2 non-woven fabric • Provide protection from dust and damage from the environment • Storage bag included 189" x 76" x 61" FITS VEHICLES UP TO 15-3/4 FT IN LENGTH 8180705 – Wt. 5.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225" x 80" x 63" FITS VEHICLES UP TO 18-3/4 FT IN LENGTH 8180713 – Wt. 6.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4999 5999

products have always been one of the special features of Princess Auto. Business overstocks, discontinued merchandise, factory overruns, production line changes, etc. result in extremely good values for our customers. Many short-supply items are not advertised, so visit your nearest Princess Auto location for the best selection!

MIRRORS

AUTOMOTIVE LIGHTS

TAPE

Page 412

Page 411

Page 410

HARDWARE

AUTOMOTIVE WIRING

MOTORS

Page 407

Page 410

Page 404

MOBILE AUDIO

SWITCHES

SURGE PROTECTORS

Page 406

Page 405

Page 407

LOOK FOR THESE IDENTIFICATION SYMBOLS.

REMOVED FROM EQUIPMENT Refers to items which are not brand new but in excellent condition. Many of these items are removed from and recycled from heavy duty commercial industrial equipment and have many hours of service left in them. They are being offered for resale at a fraction of their original cost and are covered by our Royal Service Promise.

FACTORY RECONDITIONED Originally returned to a retailer for a variety of reasons, these items end up back at the factory where minor adjustments are made to put the product back to factory specs. Slightly used, these products are sold far below the price of a new one.

RUNNING LOW Occasionally you may see our Running Low Indicator beside an item you’re interested in. It’s there to let you know our stock on the item is limited and may not be available for much longer.

Shop Online! www.princessauto.com

403

AIR & ACCESSORIES

PRESSURE VACUUM GAUGE 1-1/2" back mount 0-300 PSI, 0-30 in-Hg. gauge. 8085060 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

GAUGE 99

400 PSI/2750 kPa pressure gauge. 8192551 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

WATER & ACCESSORIES HOSE Assorted nylon braided hose. 8190043 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

ELECTRICAL MOTORS

MOTOR

3-12VDC toy motor with a 2 mm dia. shaft. 8193815 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

12V mini gear motor. 8134405 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

899

BLOWER MOTOR

CAPACITOR 370 VAC, 10 MFD. 8134470 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

120 VAC, 60 Hz. Originally from a vacuum. 8042715 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

999

FANS & BLOWERS COMPACT SQUARE COOLING FANS Quiet running fans that are ideal for cooling and ventilating electronic equipment, power supplies, and any small area. Volts 12 VDC 12 VDC 12 VDC 110 VAC

Approx. No. of CFM. Blades – 7 – 7 – 7 – 5

O’all dim. 2" x 2" x 5/8" 2" x 2" x 3/8" 60 mm x 60 mm 4-3/4" x 4-3/4"

Wt. (lbs.) 0.1 0.1 0.1 1.2

ITEM PRICE 0770193 5.99 0770224 6.99 8032657 6.99 8012919 14.99

SURPLUS ...products have always been one of the special features of Princess Auto. Business overstocks, discontinued merchandise, factory overruns, production line changes, etc. result in extremely good values for our customers. Many short-supply items are not advertised, so visit your nearest Princess Auto Store for the best selection!

FAN 404

5-7/8" x 6-3/4" 24V, 7 blade,1.1A, 26W. 8188591 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . .

1499

SHOP SURPLUS ONLINE! www.princessauto.com

SWITCHES & ELECTRICAL SWITCH 125VAC, 6A pull switch. 8098154 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

99¢

SWITCH Leviton 1.5A quiet fan speed control with a 300W dimmer. Features 4 preset fan speeds. Beige. 8122582 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

SWITCH SPDT rocker switch. 8127862 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

699

SWITCH DTSP rocker switch. 8140923 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

299

299 ELECTRICAL BOX PLUGS Originally for plugging holes in electrical boxes. Has many other uses. 8194342 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

79¢

SWITCH Dual action momentary/rocker switch. 8112245 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

299 SWITCH

SWITCH SPST push button switch. 8112294 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

DPST switch. 8112286 – Wt. 0.1 lbs. . . . . . . . . . .

99¢

POWER ADAPTERS ADAPTER Input: 120 VAC, 60 Hz, 5.6W Output: 9 VDC, 250mA 8075491 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

12 VDC ADAPTER

ADAPTER 1.5A/100 to 240VAC 8192528 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

799

Originally designed for Gameboy systems. Output: 9/6VDC, 500mA. 8140915 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

499

CELL PHONE ACCESSORIES

NOKIA® KEYPADS 4 pk. interchangeable keypads for 3320/3360 phones. 8036196 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

HANDSFREE KIT Universal handsfree kit for use with most cell phones. Features an ear swing design and a mute 99 button. 99 8188849 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

405

SPEAKERS

SPEAKER ENCLOSURE

A) 3-1/2" TWO-WAY – Coaxial. Rated 30 watts RMS, 4 ohm. Great replacement or upgrade speaker. Heavy duty magnet. 99 8001332 – Wt. 2.3 lbs. . . . . . . . . . . . . . . . . . . . . B) 4" TWO-WAY – Coaxial. Rated 30 watts RMS. Great replacement or upgrade speaker. Heavy duty magnet. 99 99 8001334 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . .

Carpeted 6" x 9" speaker box. Includes spring terminals, accoustically insulated cabinet and wire leads. Rugged carpeting. Great for trucks, hatchbacks, etc. O’all dim.: 12-1/4" x 7" x 8-1/4". 0710324 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . . . . .

AUDIO ACCESSORIES CABLE WRAP

CABLE WRAP Keep your TV/audio cables neat and tidy with this expandable braided sleeve. Expands to 2" wide. 8111635 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

Keep your TV/audio cables neat and tidy with this expandable braided sleeve. Expands to 2-1/4" wide. 99 8111676 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

FM RADIO Multi functional 7 in 1 FM radio. Also features an LED light, compass, thermometer, magnifier, mirror, and a whistle. 8174286 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . .

RADIO 1299 FM Listen to your favourite tunes while on your PC/laptop with iConcept mobile USB FM radio. 8137283 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

499

AUDIO CABLE 6 ft. premium audio cable made by GE. 8187528 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

BOOM BOX RADIO AM/FM mini boom box with built-in speakers and antenna. 8122566 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . .

1299

XLR CONNECTORS 406

999

RADIO

XLR© style wall plate speaker hookup jack. 3 Portable mini AM/FM radio pin, high quality construction, male socket. 99 with built-in speakers and headphones. 8002026 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . 8122574 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

VIDEO & GAMING ACCESSORIES GAME SURGE PROTECTOR 420J game manager. Features 6 surge protected outlets and storage for up to 20 uncased games, 2 memory cards and 2 controllers.

CABLE 6 ft. composite video cable made by GE. 8163628 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

Wt. 6.8 lbs. 99

8185373 – X-BOX 8185365 – PLAYSTATION . . . . . . . . . . . . . . . .

1499

ANTENNAS & ACCESSORIES

ANTENNA INSTALLATION KIT

ANTENNA Replacement flexible cordless phone antenna. 8189904 – Wt. 0.1 lbs. . . . . . . .

Kit includes brackets, turnbuckle, aircraft cable and screws. 8154783 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . .

99¢

199

COMPUTER ACCESSORIES

CRIMPER Steel formed with blue vinyl grip. For RG-59 & RG-6 F-type cable TV connectors. Hex: 0.35 (8.89 mm), 0.32 (8.13 mm) and 0.255 (6.48 mm). With crimp release and ratcheting crimp action. O’all length: 9". 99 8000921 – Wt. 1.3 lbs. . . . . . . . . . . . . . . . . . . . .

CAMERA MOUNT

LOCK

6 FT CAT-5 CABLE

ABS construction tilting camera mount. Beige. Standard thread for cameras, speakers, etc. 7-1/2" long. 8049391 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499

Keep your data secured with this USB thumbdrive lock. 8162737 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

RJ45 jacks. Suitable for ethernet or broadband connections. 8024602 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

499

HARDWARE

ANIMAL KEYCHAIN

KEYCHAIN Split ring keychain with a metal belt hook. 8043978 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Assorted metal animal keychains such as deer, bears, fish, etc. For best selection, visit the store nearest you. ¢ 8088130 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

KEYCHAIN Assorted LED keychains. For best selection, visit the store nearest you. 8127342 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

249

CABLE CLAMPS Assorted sizes of insulate cable clamps. 8177610 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

407

GAS SHOCK 9-1/2" threaded gas shock. 8147043 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . .

699

ROPE CLAMP SET 1/4" to 3/8" thimble and rope clamp set. For making loops in cabling, etc. 8004042 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

79¢

SHOCK 9-1/2" gas shock. 8192536 – Wt. 0.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

CLAMPS 799 CABLE 20 pk. of nail-on cable clamps. Assorted sizes to choose from. 8176448 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

149

SHOCK 8" gas shock. 8192544 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 BUMPER 2" x 4" rubber bumper. Ideal for boats. 8164634 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

HOOK Flat snap hook. Holds up to 1-3/4" strap. 8143125 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

499

DOOR STOP Protect your wall from damage. 8097396 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . .

89¢ DOOR CHAIN Brass plated chain door fastener. 8141384 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

CAM LOCK Hex key cam lock with a 9/16" bore 8162927 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

199 HINGE Heavy duty steel hinge. 8188732 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

LOCK Cam lock with keys. 3/8" bore 8193534 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199 HINGE Heavy duty 4-way butterfly hinge. 8109399 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

LOCK 2" cam lock with a 3/4" bore. 8160871 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

LOCK Quarter turn lock. Ideal for tool chests, cabinets, etc. 8145690 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

CABINET HINGES

49¢

HOUSE NUMBERS 408

699

Assorted black plastic 6" house numbers with screws. For best selection, visit the store nearest you. 8044489 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .

Assorted styles of cabinet hinges. 8194334 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

FOOTING

199

Designed for saw horses, table legs, etc. 8192619 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

RIP LOCK Locks your lumber into place for rip cuts. Helps reduce workplace accidents. 8192585 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

499 BOLTS 100 pack of 1/4-20 x 1-3/4" grade 5 hex bolts. 8163552 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . . . . . .

699

SAW HORSE BRACKETS 4 pk. of metal saw horse brackets. 8188690 – Wt. 10.0 lbs. . . . . . . . . . . . . . . . . . .

2499 HARDWARE Assorted packages of hardware for a variety of tasks. 8193450 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

KNOBS 2 pc. of 1/4" threaded knobs. 8166373 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199 ANCHORS

THREADED KNOB Standard threading has a variety of uses. 8192510 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

Pack of 100 plastic drywall anchors. Red, accepts standard drywall screws. Allows greater load than screws alone. O’all dim.: 4" x 2" x 3-1/8". 49 ¢ 8037698 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . . .

HANDLES Pack of 4 poly handles with threaded mounting stem. Each handle measures 3/4" by 4-1/4". 8037778 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

199 GRIP 2-1/2" x 2" foam barbell grip. 8126336 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

HOOKS 2 pack of S extender hooks. Holds up to 50 lbs. Weather resistant 8200909 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

CLIPS

199

5 pk. of clevis clips. 8134413 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . .

299

EYE BOLT

J HOOK 2" zinc plated J hook. 8196164 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

99¢

Assorted sizes to choose from. 8196099 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

79¢

DOWEL 5 ft. x 1" plastic dowel. 8199432 – Wt. 2.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

METAL 4-3/8" x 2-1/8" sheet of metal with a mirrored chrome finish. 8192759 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

699

60" METAL TUBE

79¢

Ideal for chain link fences. 8140147 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

409

DUCT TAPE

Large rolls of assorted TAPE DISPENSER 3" duct tape. For sealing air ducts, patching jobs Dispense tape with ease with or wherever strong tape is required. 99 the TapeWiz. Holds up to 1,000 ft. 5330082 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . of barricade tape. Can be used with a variety of different types of tape. 8075459 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

TAPE 1.88" x 36 ft. roll of carpet masking tape. 8139685 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

249

CASTERS & WHEELS

WHEEL

CASTER 6" harden rubber swivel caster. Features a grease nipple on swivel. 8146045 – Wt. 5.7 lbs. . . . . . . . . . . . . . . . . . . .

CASTER Dual wheel swivel Plastic construction 8173882 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

2-1/2" plastic wheel with a 1/4" bore. 8171563 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

99¢

WHEEL 99

3-5/8" rubber wheel with a 5/16" bore. 8173999 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

249

AUTOMOTIVE ACCESSORIES TERMINALS TERMINAL Clamps to battery cable for easy installation. Top post mount. 8000306 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

Wt. 0.1 lbs.

199

Gauge Type Stud Size Colour Qty. ITEM PRICE 22-18 spade #8 red 6 8004437 0.29 12-10 spade #10 yellow 4 8004365 0.39

WIRE LOOM Assorted styles of wire loom. Used to protect trailer and automotive wires from damage and weathering. 4211079 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

TEST LEADS 5 pk. test leads, 36" long. Ends have alligator clips with protective rubber boots. 99 8049417 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . .

VALVE CAPS 410

4 pk. of gold plated valve caps. 8122749 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

VALVE CAPS

299

4 pk. of black plastic valve caps. 8157596 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

99¢

4 PC LUG NUTS

NEEDLE Split eye needle for tire repairs. 8157604 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

2D conical seat 12 x 1.5. Cold forge steel construction. 8106486 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

TIRE GAUGE Standard pencil tire gauge. 10-50 PSI. 8157646 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

99¢ MOUNTING KIT Universal fog/driving light mounting kit. Includes mounting bracket and hardware for 2 lights. 99 8125403 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

GAUGE 300 PSI gauge with 7/16" threaded stem. 8160889 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

499 AXLE STUD 4" x 1/2" axle stud with threads and a hole for a cotter pin. 8111122 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

199

LIGHTS 2 pc. square clear side maker lights made by APC. Originally designed for fender mount accent lighting. Can be tied into turn signals for added safety. 99 8156234 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

HITCH COVERS 2" plastic hitch covers made by Reese.

Wt. 0.2 lbs.

8185746 – NASCAR #88 8184715 – NASCAR #28 8185761 – NASCAR #3 8185753 – NASCAR #2 . . . . . . . . . . . . . . . . . . . . .

399 LIGHT 12V 16 LED marker light. Clear. 8197956 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

LIGHT 2" x 2-3/4" amber marker light. 12V. 8197949 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

BULB Long life GE 12V, 71W, 40° beam bulb. MR16. 8076408 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399 LIGHT 125VAC mini bulb light. Great as a test or indicator light. 99 8124109 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

BULBS 2 pc. replacement amber 1157 bulbs made by Redline. 8156291 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

999

99¢

WARNING LIGHT

179

Red LED warning light to help prevent vehicle theft. 8029714 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

999

MEDALLIONS Wt. 0.1 lbs.

BULB

8157984 – BIO HAZARD SYMBOL 8157992 – DRAGON . . . . . . . . . . . . . . . . . . . . . .

299

Halogen 12V 65/45W bulb. 9004. 8196388 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

349

411

DECALS

DECAL 4-1/2" x 4-1/2" West Coast Customs decal. 8197915 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

DECAL

Wt. 0.1 lbs.

8151409 – 4 PC BULLET HOLE 8151318 – HAZARD SYMBOL . . . . . . . . . . . . . .

Customize your vehicle with this House of Hydraulics decal. 8122376 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

SHIFTER KNOB DOOR LOCK KNOBS Assorted automotive door lock knobs. For best selection, visit the store nearest you. 99 8136400 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

Assorted shifter knobs. For best selection, visit the store nearest you. 8136426 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

399

MIRROR 2 pk. of 5-7/8" x 4-1/8" deluxe Euro-style mirrors made by Koehler. Black finish 8199325 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . .

HANDLE Automotive flip grab handle with hook. 8196420 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . .

1499

MIRROR HINGE Automotive safety swing door stop. 8196438 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

299

Dual rear view safety mirror with a built-in convex mirror made by Koehler. Helps reduce blind spots. Fits most existing mirrors. 99 8199390 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . .

MIRROR 2" round self adhesive blind spot mirror. Green tint. 8199366 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

MIRROR

249

Replacement chrome 8-1/2" x 5-1/2" universal Euro style mini swing-away mirror. Mounting hardware included. 99 8089997 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . .

MIRROR Universal fit swing away mirror. 8196495 – Wt. 2.1 lbs. . . . . . . . . . . . . . . . . . . .

STORAGE

1299

AMMO BOX

412

Heavy duty steel army surplus ammo box. Makes a great toolbox or storage container. O’all dim.: 11-3/4" x 6-1/4" x 7-1/4". 8023569 – Wt. 6.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

BAG 99

10" x 8-1/2" heavy duty plastic bag with hanger and metal snaps. Clear. ¢ 8187023 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

PROJECT BOX

MEDIA VAULT

Great for many types of small electronics project Keep your software secure housings. Measures 2" X 3" X 1.5" 99 with this media vault. 8140881 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . Holds up to 6 discs and 16 memory cards. 8162745 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . . . . . .

499

TOOLS & ACCESSORIES

BRUSH Nylon pressure washer brush with adapter. Great for washing windows, garden furniture, concrete slabs, etc. 99 8099467 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

TOOL TRAY Keep your tools close and off the floor with this tool tray, designed to mount on to the side of a saw horse. Holds up to 100 lbs. 99 8188674 – Wt. 6.2 lbs. . . . . . . . . . . . . . . . . . . .

30" THREADED HANDLE Standard threads fit paint rollers, window squeegies, etc. 8201022 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

299 2 PC GARDEN TOOL SET Includes trowel and cultivator. 8127839 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . .

249

BROOM 19" push broom, stands 58" tall. 8201006 – Wt. 2.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

999 ROTARY FILE SET 8 pc. rotary file set with 1/4" shank. 8169955 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .

1499

SHEARS Lightweight pruning shears for your gardening. Quality construction. 8112526 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

499 ROTARY CUTTER SET 3 pc. rotary steel cutter set with 1/8" shank. 8169971 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

ROLLER END “C" CLAMP Industrial strength polymer “C" clamps. Lightweight, non-conductive, and chemical resistant. Great for industrial and home projects. 8089401 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

799 6PC PAINT KIT

ROLLER Replacement 4" paint roller. 8148983 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

199

Features a paint tray, roller, roller frame, 4" brush, 1-1/2" brush, and a drop cloth. 8188922 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . .

1299

413

CHAIN 24" stainless steel beaded chain. Great for sink stoppers. 8044919 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

SCREW COVERS

22¢

Includes 4 retainers and screw covers, #20" screw Wt. 0.1 lbs.

8181232 – PLAIN 8181257 – DODGE 8181265 – FORD . . . . . . . . . . . . . . . . . . . . . . . . . . .

299

CABLE Assorted lengths and styles. General purpose throttle cable. For best selection, visit the store nearest you. 8050388 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . .

PEDALS

699

2 pk. of thread-on bike pedals with reflectors. Black finish. 8184590 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . .

399

WRISTBAND Assorted velco wrist/watchbands. 8193476 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

199 FERRITE COIL 1-3/8" ferrite coil. 8191629 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

49¢

STRAP 18" vinyl coated steel mesh strap. Ideal for digital cameras. 8164915 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . .

699 OUTLET COVERS 8pk of clear outlet covers. 8189946 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

PATCHES 10 pack of iron-on canvas patches. For patching tents, inflatables, etc. 2" x 2" 8093577 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

GRIT TAPE 8 strips of white 3/4" x 10" tub and shower safety grit tape. 99 Has many other uses. 8186215 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

WASH MITT 2-in-1 chenille wash mitt with mesh netting to scrub road debris. 8190027 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

Medium duty scrub sponge with built-in dish detergent. 8190423 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

299

ASSORTED SPONGES

299

SPONGE 414

99¢

Assorted sponges are great for many different cleaning jobs. 8196081 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

69¢

BUCKLE

99¢

Buckle designed to fit a 1-1/4" strap. 8143133 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . .

149

LAWN EDGER Ryobi lawn edger attachment. 8193880 – Wt. 6.9 lbs. . . . . . . . . . . . . . . . . . . .

2999

BRUSH Heavy duty wash brush with a telescoping handle. Extends from 27" to 48". 8192494 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . . . .

BLOWER 699 SWEEPER Ryobi sweeper blower attachment. 8193864 – Wt. 4.5 lbs. . . . . . . . . . . . . . . . . . . .

2999

Includes bottle opener (built-in). For use with TURBO BLOWER recycling programs or for just saving space in the Ryobi turbo blower attachment. trash. Heavy duty design. 99 8193914 – Wt. 4.6 lbs. . . . . . . . . . . . . . . . . . . . 8022418 – Wt. 2.5 lbs. . . . . . . . . . . . . . . . . . . . . .

2999

CAN CRUSHER & BOTTLE OPENER

2" HEATSINK Aluminum construction. Has many cooling uses. 8166332 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

249

RULER 6" stainless steel metric/inch ruler. Features 1/16" -1/4" drill gauge. 8169930 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .

249

FOAM 4" x 2-1/2" piece of foam. 8147167 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . .

49¢ DECOY SECURITY CAMERA

DECOY SECURITY CAMERA • Motion detector sensor • Activation light gives realistic appearance • Battery operated, no wiring needed 8180325 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . .

• Motion detector sensor with motorized pan movement • Activation light gives realistic appearance • Battery operated, no wiring needed 99 8180333 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . . . .

1499

LINER MAT Great for tool box lining. Easy to cut and use. Assorted colours and textures. Measures: 2 ft. x 3 ft. x 1/8". 8060741 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . .

LIGHT

999

3-in-1 rechargeable 12V flashlight/map light/SOS emergency light. 99 8186231 – Wt. 0.2 lbs. . . . . . . . . . . . . . . . . . . . . . .

415

MAIL ORDER

MAIL ORDER CAN'T MAKE IT IN? Contact our National Call Centre today and let us take care of the rest.

SHIPPING RATES* $500 base rate plus 50Â˘ per pound *Items above 30 kg./66 lbs. subject to additional charge.

Phone: 1-800-665-8685 Fax: 1-800-265-4212 e-mail: mailorder@princessauto.com

Princess Auto reserves the right to choose the shipping carrier. Extra shipping charges may apply for freight shipments. Air stage customers please call for a special quote. To open a Princess Auto 30-Day Business or Institutional Charge Account, contact our Credit Department in Winnipeg at (204) 667-4630 or the Princess Auto Store nearest you. It is Princess Autoâ&#x20AC;&#x2122;s objective to maintain prices for the life of the catalogue to the best of our ability. However, due to changing market conditions beyond our control, prices are subject to change without notice. Catalogue prices do not include P.S.T., G.S.T. or H.S.T. All prices shown are in Canadian funds.

The National Call Centre in Winnipeg does not accept cheques, money orders or C.O.D as a method of payment.

416

Phone Winnipeg Toll Free:

31 stores across Canada

1-800-665-8685

www.princessauto.com

Toll Free Fax: 1-800-265-4212

See pg. 418-419 for locations

PLEASE PRINT CLEARLY

Company Name (if applicable)

(

)

Surname

MAIL ORDER

DATE:

WINNIPEG MAIL ORDER: 1-800-665-8685 Phone Toll Free: Fax Toll Free: 1-800-265-4212 Mailing Address: P.O. BOX 1005, WINNIPEG, MB. R3C 2W7 Shop Online: www.princessauto.com

First Initial

Telephone Number

Email address:

Street Address

R.R. Number, Box Number, etc.

City/Town and Province

Postal Code

I would like to receive addressed promotional materials from Princess Auto. I prefer to receive promotional materials in French or English. PRICES ARE SUBJECT TO CHANGE

Qty.

ITEM #

Page #

SHIPPING RATES* $5.00 base rate plus 50Â¢ per pound *Items above 30 kg./66 lbs. subject to additional charge.

See page 416 for full details

DESCRIPTION

WEIGHT

PRICE (ea.)

SUB-TOTAL ADD SHIPPING and PROCESSING FEES

SUB-TOTAL ADD PROVINCIAL SALES TAX (If applicable) BC 7% , MB 7%, SK 5%, ON 8%, ADD 5% G.S.T. for PE, PQ, ON, MB, SK, AB, BC, YT, & NT. ADD 13% H.S.T. for NL, NS, NB

The National Call Centre in Winnipeg does not accept cheques, money orders or C.O.D. as a method of payment.

GRAND TOTAL METHOD OF PAYMENT:

Card Expiration Date

417

WESTERN STORE LOCATIONS

WESTERN CANADA STORE LOCATIONS BRITISH COLUMBIA KELOWNA 1920 Spall Rd., V1Y 4R1 Toll Free: 1-866-725-1008 Ph: (250) 860-6191 Fax: (250) 861-8372 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. LANGLEY 19878 Langley Bypass (in Langley Square), V3A 4Y1 Toll Free: 1-866-725-0019 Ph: (604) 534-9554 Fax: (604) 534-1163 Mon. to Fri. 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

PRINCE GEORGE 3330 Massey Drive, Massey Centre, V2N 4C1 Toll Free: 1-866-725-4124 Ph: (250) 563-3113 Fax: (250) 563-3232 Mon. to Fri. 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 6:00 p.m.

EDMONTON NORTH 11150 163 St. NW, T5M 3R5 Toll Free: 1-866-725-1005 Ph: (780) 483-0244 Fax: (780) 484-7080 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

RED DEER 6833 66 St., T4P 3T5 Toll Free: 1-866-725-0013 Ph: (403) 342-6181 Fax: (403) 346-6855 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

COQUITLAM 15 King Edward St., V3K 4S8 Toll Free: 1-866-725-0023 Ph: (604) 777-0735 Fax: (604) 777-0884 Mon. to Fri. 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

EDMONTON SOUTH 9835 34 Ave. NW, T6E 5X9 Toll Free: 1-877-725-1030 Ph: (780) 481-2315 Fax: (780) 481-5474 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

GRANDE PRAIRIE 13601 100 St., T8V 4H4 Toll Free: 1-866-725-1009 Ph: (780) 539-1550 Fax: (780) 532-2757 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

A CALGARY NORTH

WINNIPEG (Panet Road) 515 Panet Rd., R2C 2Z1 Toll Free: 1-866-725-0003 Ph: (204) 669-4252 Fax: (204) 669-4269 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 12:00 p.m. - 5:00 p.m. WINNIPEG (Portage Ave.) 3292 Portage Ave., R3K 0Z1 Toll Free: 1-866-725-0014 Ph: (204) 831-8275 Fax: (204) 831-0238 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 12:00 p.m. - 5:00 p.m.

418

COMING FALL 2008! 701 East Quance Gate, S4V 3A4

BRANDON 1800 18 St. N, R7C 1A5 Toll Free: 1-866-725-1011 Ph: (204) 726-0601 Fax: (204) 729-9256 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 12:00 p.m. - 5:00 p.m.

2850 Hopewell Pl. NE, T1Y 7J7 Toll Free: 1-888-725-1004 Ph: (403) 250-1133 Fax: (403) 291-2781 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. CALGARY SOUTH 4143 114 Ave. SE, T2Z 0H3 Toll Free: 1-888-725-0031 Ph: (403) 723-9904 Fax: (403) 723-9910 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. LETHBRIDGE 2950 32 St. S, T1K 7B4 Toll Free: 1-877-725-1002 Ph: (403) 327-7300 Fax: (403) 327-1871 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 p.m. - 5:00 p.m.

LLOYDMINSTER 7920 44 St., T9V 3A7 Toll Free: 1-866-725-0025 Ph: (780) 872-5704 Fax: (780) 872-5728 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 11:00 a.m. - 5:00 p.m.

S A S K A T C H E W A N REGINA 2770 Victoria Ave. E., S4N 6M5 Toll Free: 1-866-725-1007 Ph: (306) 721-5115 Fax: (306) 721-2696 Mon. to Fri., 8:00 a.m. - 9:00 p.m Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 10:00 a.m. - 5:00 p.m. SASKATOON 2802 Idylwyld Dr. N, S7L 5Y6 Toll Free: 1-866-725-1006 Ph: (306) 665-8022 Fax: (306) 664-9554 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 10:00 a.m. - 5:00 p.m.

COMING SPRING 2009! SUDBURY, ONTARIO

COMING FALL 2008! 1111 Ages Dr., K1G 6L3

NEWMARKET 18195 Leslie St., L3Y 7V1 Toll Free: 1-877-725-1032 Ph: (905) 952-2107 Fax: (905) 952-2159 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

BARRIE 11 Commerce Park Dr., L4N 8X1 Toll Free: 1-888-725-0020 Ph: (705) 739-0575 Fax: (705) 739-7362 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

OTTAWA 1301 Ages Dr., K1G 6N1 Toll Free: 1-866-725-0016 Ph: (613) 247-1651 Fax: (613) 247-1657 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

MONCTON WHITBY 1380 Mountain Rd., E1C 2T8 1550 Victoria St. E, L1N 9W7 Toll Free: 1-866-725-0021 Toll Free: 1-877-725-8581 Ph: (506) 388-4400 Ph: (905) 665-8581 Fax (506) 388-4404 Fax: (905) 665-5949 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

MISSISSAUGA 6608 Dixie Rd., L5T 2Z9 Toll Free: 1-866-725-0012 Ph: (905) 564-1011 Fax: (905) 564-8023 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 10:00 a.m. - 5:00 p.m.

KINGSTON 1016 Centennial Dr., K7P 2S5 Toll Free: 1-866-725-0027 Ph: (613) 530-3790 Fax: (613) 530-3717 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 8:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 6:00 p.m.

KITCHENER 2 Executive Pl., N2P 2N4 Toll Free: 1-866-725-0015 Ph: (519) 743-0742 Fax: (519) 743-0033 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

WINDSOR 3575 Forest Glade Dr., N8T 0A3 Toll Free: 1-866-725-0028 Ph: (519) 974-1261 Fax: (519) 974-9831 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

HAMILTON 1850 Barton St. E, L8H 2Y6 Toll Free: 1-888-725-0018 Ph: (905) 561-9400 Fax: (905) 561-7233 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

SARNIA 1370 Quinn Dr., N7S 5M8 Toll Free: 1-866-725-0029 Ph: (519) 542-1661 Fax: (519) 542-8155 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

LONDON 583 Exeter Rd., N6E 2Z2 Toll Free: 1-866-725-0010 Ph: (519) 649-7001 Fax: (519) 649-7351 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

Visit our website.

www.princessauto.com

N E W

EASTERN STORE LOCATIONS

EASTERN CANADA STORE LOCATIONS

B R U N S W I C K

N O V A

S C O T I A

DARTMOUTH (Burnside Park) 81 Wright Ave., B3B 1H4 Toll Free: 1-866-725-0017 Ph: (902) 468-8396 Fax: (902) 468-7842 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

N E W F O U N D L A N D ST. JOHN'S 410 Stavanger Dr., A1A 0A7 Toll Free: 1-866-725-0026 Ph: (709) 738-3800 Fax (709) 738-3870 Mon. to Fri., 8:00 a.m. - 9:00 p.m. Saturday, 9:00 a.m. - 6:00 p.m. Sunday, 9:00 a.m. - 5:00 p.m.

MAIL ORDER WINNIPEG Mailing Address P.O. Box 1005, Wpg. MB., R3C 2W7 Ph: 1-800-665-8685 Fax: 1-800-265-4212 Mon. to Fri. 7:00 a.m. - 6:30 p.m. Saturday 8:00 a.m. - 4:00 p.m.

419

INDEX 420

A Absorbent ........................... 209 Acid Brushes ...................... 303 Adapters ..... 33-35, 58, 81, 167, 179-180, 339, 378, 405 Adhesives ............ 202-203, 207 Adjustable Wrenches ......... 277 Air Chucks ......................... 137 Air Compressors Accessories ................ 131 Components ....... 129-130 Drains ........................ 131 Gauges ............... 131, 404 Light Industrial .......... 125 Magnetic Heaters ...... 130 Magnetic Starters ...... 130 Oil ...................... 129-131 Pressure Switches ...... 130 Tanks .................. 129-130 Vacuum Gauges ......... 404 Air Drills ............................ 154 Air Filtration Dryer .......................... 137 Filters ...... 68-69, 138-139 Lubricators ................ 138 Regulators .......... 138-139 Air Fittings ................. 131-137 Air Horn.............................. 401 Air Hose ..................... 134-135 Air Tools Angle Grinders ... 154-155 Caulking Gun ............ 153 Die Grinders .............. 155 Drills .......................... 154 Flange ........................ 153 Grease Gun .................. 53 Hammers ................... 150 Impact Wrenches ....... 149 Nailers ................ 151-153 Nibblers ..................... 154 Oil .............................. 154 Punches ...................... 153 Riveter ............... 148, 153 Sanders ............... 147-148 Saws ................... 153-154 Shears ........................ 154 Alligator Clips ................... 360 Aluminum .......................... 314 Anchor Shackles ....................88 Anchors .............. 389-390, 409 Angle Grinders ........... 156-157 Antennas ............................ 407 Anti-Seize Compound ....... 207 Antifreeze Tester ................ 239 Anvils ................................. 201 Aprons ................................ 323 Arbor Presses ..................... 196 ATV Accessories ........ 399-400 ATV Tires .................... 340-341 Autobody Repair ................ 229 Autobody Tools Clamps ....................... 233 Dent Pullers ............... 228 Dollies ....................... 228 Door Spring ............... 230 Hammers ................... 228

Autobody Tools cont. Lift Kits ..................... 232 Rams .................. 232-233 Repair Kits.................. 232 Sanders ...................... 230 Spreader ..................... 232 Trim ........................... 230 Upholstery ................. 231 Windshield ................. 231 Automotive Accessories .............. 411-412 Back-Up Alarm .......... 374 Automotive Lights ...... 365-374 Fog Lamp Kits .......... 373 Spot Lamps................. 374 Spot Lamps ................ 373 Tractor Lamps ........... 374 Work Lamps ............... 373 Automotive Tools ................ 190, 230-249 Automotive Wrenches ................ 237, 248 Awls ............................. 99, 305 Axes ................................... 294 Axle Assemblies ........ 334,-336 Axle Stud ........................... 411

Bits cont. Router ......................... 166 Screwdriver ........ 266-267 Security ...................... 266 Security Socket .......... 267 Torx ........................... 268 Blades Fan ............................... 65 Hacksaw .................... 296 Razor ......................... 305 Squeegee .................... 212 Utility Knife ....... 303-304 Blow Guns .................. 139-140 Boat Rollers ....................... 340 Body Repair ................ 228-233 Bolt Cutters ........................ 287 Bolt Extractors ................... 286 Bolts ........................... 337, 409 Books .................... 26, 69, 203, 250-251, 333 Booster Cables ................... 190 Bottle Jacks ........................ 181 Bow Saws .......................... 296 Box Cutters ................. 303-304 Boxes .... 62, 308-311, 383, 413 Brackets ............... 10, 408, 409 Brad Nails ........................... 152 Brake Actuators ................. 355 Brake Controllers ............... 339 Brake Tools ................. 242-245 Brakes ................................ 338 Brass Fittings .............. 131-134 Brass Hammers .................. 292 Breakaway Kit ................... 339 Breaker Bars ............... 275-276 Breathers .......................... 7, 40 Brooms ....................... 211, 413 Brushes Acid ........................... 303 Battery ....................... 240 File ............................. 297 Nylon ................. 161, 174 Paint ........................... 303 Pressure Washer ........ 124 Scrub .......................... 415 Welding ..................... 328 Wire ... 174-175, 297, 328 Bucket Organizers .............. 308 Buckets & Pails ................96-98 Buffing Tools ...... 158, 171-173 Bulbs ................... 373-374, 411 Bumpers ..................... 340, 408 Bung Nuts ............................. 50 Bungee Cords ............. 104-105 Bushings ............................... 80

Bags ................................... 412 Bale Hook ..............................96 Ball Mounts ................ 353-354 Ball Pein Hammers ............ 292 Ball Sockets ...........................80 Ball-Hitch............................ 354 Bandsaws & Blades ........... 194 Bar Clamps ................. 284-285 Barrel Dollies ..................... 192 Barrel Pumps ................. 49, 52 Battery Chargers ................ 191 Battery Terminals ....... 378, 410 Battery Tools Adapters .................... 378 Brushes ...................... 240 Filler .......................... 239 Holders ...................... 378 Master Switches ........ 377 Testers ........................ 190 Beacons .............................. 371 Bearing Tools Packers ............... 246-247 Pullers ................ 245-247 Seal Drivers ........ 246-247 Separators ........... 245-247 Bearings Roller ......................... 337 Steady .......................... 77 C Wheel ........................ 337 Bed Plates .......................... 196 C-Clamps ............................ 285 Bench Grinders .................. 161 Cable Aircraft ..........................87 Benders ...................... 197, 253 Audio .......................... 406 Bevels ......................... 258, 262 Computer ................... 407 Bicycle Accessories Pull ............................ 414 Pedals ........................ 414 Throttle ....................... 131 Bilge Pumps ....................... 112 Video .......................... 407 Bits Welding ..................... 327 Drill ............ 163-166, 199 Winch ........................ 386 Drill Saw ................... 166

Clamps cont. Rope .......................... 408 Sheet Metal ....... 283, 326 Spring ........................ 284 Support Rod .............. 286 Toggle ......................... 285 Welding ...... 283, 326-327 Cleaning Chemicals ........... 210 Cleats ................... 151, 389-390 Clevises ................................ 89 Clips ........................... 360, 409 Clutch Tools ....................... 241 Clutches Centrifugal ...................... 71 Hydraulic ........................ 12 Code Readers ..................... 250 Coil Spring Compressors ... 242 Combo Wrenches ....... 277-278 Come-Alongs .........................90 Compression Tools ............. 249 Compressors ............... 125-128 Computer Accessories ....... 407 Connectors ......... 327, 358-359, 360-361, 406, 410 Conspicuity Tape ............... 372 Containers ................... 309-311 Conversion Kit ..................... 12 Conversion Table ............... 261 Cord Computer ................... 407 Extension ................ 58-60 Counters ............................... 57 Countersinks ...................... 165 Couplers Air ...................... 132-133 Balls ........................... 354 Cam-Lock .......... 112-113 Quick ......................... 122 Quick Connect ... 112-113 Coupling Nuts ...................... 85 Coveralls ............................ 222 Covers ............. 44, 55, 400, 402 Cranes ........................ 185, 383 Creepers ............................. 189 Crimper ............... 361-362, 407 Crowbars ............................ 294 Cut Off Saws .............. 159-160 Cut Off Wheels .................. 159 Cutting Bit Set ................... 199 Cutting Tools Bolt ............................ 287 Pipe ............................ 252 Pliers .................. 281-284 Razor Blades ............. 305 Saws ................... 295-296 Scissors ...................... 303 Snips .......................... 289 Tile.............................. 306 Tubing ....................... 252 Utility Knives ..... 303-304 Welding & Cutting Kits .... 320-322 Cylinder Ends ............... 6-7, 43 Cylinder Pins ...........................6 Cylinders Accessories ..................6-7 Air .......................... 42-43

Cylinders cont. Bases ............................ 43 Custom ............................6 End Caps .................... 5-7 Hoist ............................... 6 Hydraulic .................... 2-6 Logsplitter ...................... 5 Pins ................................ 6 Pneumatic ............... 42-43 Power Pack ........ 5, 10-11 Press ............................... 5 Stroke Limiters ............... 7

INDEX

Cable Cutters ..................... 288 Cable Ties ........... 363-364, 406 Calipers .............................. 259 Canvas Patches ................... 414 Capacitors ........................... 404 Cargo Bar .................... 393-394 Cargo Nets ......................... 393 Cargo Ratchets ............ 392-394 Cargo Straps ............... 391-393 Cargo Winches ................... 394 Carriers................................ 357 Carts Garden .......................... 95 Hand .......................... 189 Oil Filter/Transfer...... 147, 158, 163, 166 Platform ...................... 192 Pressure Washer ........ 121 Tool ............................ 307 Welding ............. 317, 322 Casters ........ 343, 395-398, 410 Cattle Prod .............................96 Caulking Guns ................... 230 Cell Phone Accessories ...... 405 Centre Finder ..................... 260 Chain .................................. 414 Breakers ....................... 72 Coil ......................... 88-90 Lube ............................. 72 Puller ............................ 71 Transport..................... 388 Chalk & Chalk Lines ......... 256 Chargers ..................... 191, 377 Chemicals Automotive ......... 208-209 Industrial ............ 206-207 Cherry Pickers .................... 185 Chisels ................ 150, 290-291 Chop Saws & Wheels .......... 159, 177-178 Chucks Air ...................... 136-137 Drill ........................... 162 Drill Press .................. 198 Screwdriver Bit .. 266-267 Circuit Breakers .................. 376 Circuit Testers .................... 238 Clamps â&#x20AC;&#x153;Câ&#x20AC;? ............................. 285 Angle ......................... 233 Bar ...................... 284-285 Battery Cable ............. 190 Beam .......................... 186 C ................................ 413 Cable ................... 407-408 Drill Press .................. 198 F.................................. 285 Ground ....................... 327 Hemostats .................. 302 Hose ..................... 28, 235 Lifting ........................ 313 Locking Pliers .... 283-284 Mounting ................... 389 Muffler ......................... 79 Nylon ......................... 362 Pipe ............................ 285 Ratchet ............... 284-285

D De-Icers ................................ 98 Deburring Tools ................. 253 Decals ......................... 411-412 Deflection Gauge ............... 261 Degreaser ........................... 193 Dent Repair Tools .............. 228 Depth Gauges ..................... 261 Detergent ............................ 124 Die Grinders & Accessories .......... 167-174 Dies & Taps ................ 286-287 Discharge Hose .................. 108 Dividers/Combiners ............. 24 Dollies ......................... 189-192 Engine......................... 187 Trailer ........................ 357 Wheel ........................ 184 Door Hardware .................. 408 Door Stops ......................... 408 Dowel ................................. 409 Draw Bar .............................. 80 Drawer Liner .............. 311, 415 Drill Bit Case ..................... 165 Drill Bits ..................... 163-166 Drill Presses Clamps ....................... 200 Drills Accessories ........ 162-175 Air .............................. 154 Cordless ..................... 158 Electric ............... 156-157 Keys ........................... 162 Mini ........................... 302 Saw Bits ............. 165-169 Sharpening Jigs .......... 163 Sharpening Rig .......... 163 Drive Adapters ................... 272 Drive Plates ......................... 336 Driveline Hardware ......... 71-78 Dust Caps............................ 336 Dust Collector ..................... 160

E E-Clip Kits ........................... 83 E-Track................................ 390 Ear Plugs/Protection .......... 220 Electric Motors ....... 56-57, 404 Electric Winches ......... 384-386 Electrical Cord ........................ 58-60 Outlets ................. 57, 405 Tape ..................... 62, 207 Testers ............... 237, 360

421

INDEX 422

Electrodes & Holders ........ 319-320, 327 Electronic Ignition ................ 70 Emery Cloth ....................... 230 End Caps .................... 5-7, 196 Engine Cover ............................ 69 Diesel ............................ 68 Gas ............................... 67 Lifts ............................ 185 Mufflers .................. 68-69 Stands ........................ 187 Tools ................... 233-249 Engraver ............................. 304 Exhaust Caps ........................ 79 Exhaust Tools ..................... 245 Extension Bars .......... 162, 166, 179-180, 275-276 Extension Cords ................. 318 Eye Bolts ...................... 84, 409 Eye Protection ... 218, 258, 323

Fittings cont. Pneumatic ............... 45-46 PVC ........................... 114 Water .......... 107, 114-115 Flagging Tape ..................... 227 Flange Bearings ................. 342 Flanges ................................. 38 Flat Bars ............................... 80 Flint Lighters ..................... 322 Float Switches .................... 110 Floor Jacks ......................... 182 Floor Sweepers .................. 301 Flux .................................... 330 Frame Repair Kits .............. 232 Fuel Filler Caps..................... 50 Filters ..................... 49-50 Flow Meter .................. 49 Gauge.......................... 379 Hose ....................... 49-50 Nozzles ........................ 49 Pumps ..................... 48-52 F Funnels ......................... 52, 101 Face Masks Fuse Blocks ........................ 376 & Shields ................ 218, 324 Fuses .................................. 376 Fans ATM/ATC Fuses ........ 376 Ceiling .......................... 66 Glass Fuses ................ 376 Cooling ...................... 404 In-line Fuse Holders .. 376 Duct ........................ 65-66 G Portable ........................ 66 Shutters ........................ 65 Gas Engines ...........................67 Ventilating .............. 64-65 Gas Shocks ......................... 408 Farrier Tools ......................... 99 Gasket Makers & Sealants .......... 202-207 Feed Equipment ................... 96 Gauges Fencing Air ..................... 131, 404 Accessories ............ 92, 94 Ammeter .................... 379 Energizers .................... 91 Brake ......................... 243 Insulators ...................... 93 Contour ...................... 261 Pliers ............................ 94 Depth ......................... 260 Posts ............................. 92 Electrical .................... 380 Tie Wire ....................... 84 Feeler ......................... 241 Tools ............................. 94 Fuel ............................ 379 Wire ............................. 92 Height ........................ 261 Fenders ............................... 340 Hydraulic ....... 38-41, 411 Files Mechanical ................ 379 Bastard ....................... 297 Oil .............................. 379 Brush ......................... 297 Pressure Washer ........ 123 Chain Saw ................. 296 Sheet Metal ................ 261 Diamond ............. 297-298 Spark Plug ................. 241 Machinist ................... 296 Tachometers ....... 379-380 Needle ........................ 297 Thread ........................ 286 Sets ..................... 296-297 Tire ............................ 344 Filler Caps ............................ 50 Torque ........................ 276 Filters Vacuum ...................... 380 Air ........... 68-69, 138-139 Voltmeter ................... 380 Fuel ........................ 49-50 Water ......................... 380 Hydraulic ..................... 41 Welding ..................... 322 Oil ................................ 41 Water........................... 108 Gear Lubricant .......................68 First Aid Kits ..................... 222 Pullers ........................ 248 Fish Tape ............................ 256 Pumps ........................ 110 Fittings Air ...................... 131-137 Generators .............................55 Brass ................... 131-134 Glasses ....... 218-219, 258, 323 Grease ..................... 53-54 Gloves Coated ........................ 225 Hydraulic ................ 28-36 Disposable ................. 226 Pipe ............................ 115

Gloves cont. Sandblasting .............. 146 Welding ..................... 325 Winter ................. 223-224 Work ................... 223-226 Goggles Laser .......................... 258 Welding ..................... 323 Grab Hooks .......................... 89 Grease Aluminum .................... 55 Dispenser ...................... 54 Fittings .................... 53-54 Guns ........................ 53-54 Hose ............................. 54 Injector ......................... 54 Lithium ................... 54-55 Seal Kits .................... 336 Tools ............................. 54 Zerk Tool ..................... 54 Grease Gun ........................... 53 Grease Guns .......................... 53 Grinders Air ...................... 154-155 Angle .................. 154-157 Die ...................... 155-157 Meat ........................... 102 Stands ......................... 161 Grinding Points ......................... 167 Stones ......................... 168 Wheels ....................... 176 Grit Tape .................... 372, 414 Grommets .................. 361, 370 Guns Blow ................... 139-140 Cable Tie ................... 363 Caulking ............ 153, 230 Engine Cleaning ........ 140 Grease .......................... 53 Heat ............................ 158 Nail...................... 151-153 Paint ................... 141-142 Pressure Washer ........ 122 Riveting ...... 153, 287-288 Sandblasting ...... 144, 146 Suction ..........................51 Texturing ................... 143

H Hacksaws .................... 295-296 Hammers .... 228, 292-293, 328 Hand Cleaners .................... 210 Hand Winches ............. 386-387 Handles ................. 95, 409, 415 Automotive ................. 412 Broom ................ 211, 413 File ............................. 298 Hammer ..................... 294 Repair Wedges ........... 293 Sledge ........................ 294 Hard Hats ........................... 221 Hardware Kits ......... 82-84, 409 Hasps .................................. 262 Hatchets ............................. 293 Haystack Tarps ................... 103 Hearing Protection ............. 220

Hydraulic cont. Gear Puller ................ 233 Gear Pumps ............ 12-13 Hose ....................... 27-28 Motors .................... 13-14 Mounting Brackets ... 9-10 Oil ................................ 39 Plugs ................ 29, 35, 38 Port Flanges ................. 38 Power Packs ............. 8-10 Pumps ................. 7, 12-14 Rams .................. 232-233 Remote Controls........... 21 Reservoirs .................... 37 Seal Kits ..........................7 Strainers ....................... 40 Switches ................ 11, 20 Valves ..................... 15-26 Winches ..................... 385 Hydrometer ........................ 239

I Idler Sprockets & Pulleys ......................74-75 Impact Sockets ........... 179-180 Impact Wrenches ....... 149, 156

Lights cont. Bulbs ..................... 63-64, 373-374, 411 Flood .............................63 Marker ........ 365-367, 411 Mounting Kit ............. 411 Security....................... 262 Spotlights ................... 374 Towing ....................... 371 Tractor ....................... 374 Trailer ................. 365-372 Trouble ................... 63-64 Vapour/Yard ................. 62 Warning ..... 371, 377, 411 Work .............. 63, 64, 373 Linch Pins ............................. 81 Lithium Grease ............... 54-55 Livestock Care Grooming Tools & Chemicals .................. 99 Leather Care .............. 100 Loadbinders .......................... 90 Loading Ramps ........... 381-382 Locking Pliers .... 235-284, 326 Locks ... 261-262, 356, 407-409 Logsplitters .......................... 47 Accessories................... 46 Lubricants .......................... 207 Lubricators .................. 138-139 Lug Wrenches .................... 345

Jacks Bottle ......................... 181 Farm .......................... 184 M Floor .......................... 182 Implement .......... 349-350 Machinist Files ................... 296 Ratchet ..........................79 Magnets ...................... 300-301 Bases .......................... 260 Saddle ........................ 182 Floor Sweepers .......... 301 Stands ........................ 182 Parts Trays ................. 308 Trailer ................. 348-350 Pick-Up Tools .... 300-301 Transmission ............. 183 Socket Holders ... 309-312 Jiggler Siphon ........................50 Tool Holders ...... 311, 312 K Welding ..................... 326 Kerosene ............................ 216 Magnifiers ................... 298-299 Keychains ..................... 86, 407 Mallets ........................ 292-293 Keyed Shafting/Keystock ..... 75 Mandrels ............................ 171 Keys & Chucks .................. 162 Manifolds ........................... 134 Knives ......................... 302-307 Manuals .. 26, 69, 250-251, 333 Marine Accessories ............. 401 L Masks ................................. 146 Lariat .....................................96 Mauls ................................. 294 Laser Goggles .................... 258 Measuring Tools Laser Levels ....................... 258 Calipers....................... 259 Latches ....................... 299, 357 Centre Finder.............. 260 Lead Ropes ........................... 97 Depth Gauge............... 260 Leaf Springs ....................... 338 Dividers ...................... 259 Leather Punches ................. 302 Levels ......................... 258 Lens Restoration Kit .......... 204 Levels ................ 258, 354 Levels ................................. 258 Micrometers................ 259 Laser .......................... 258 Protractors .................. 260 Trailer ........................ 354 Rulers.......................... 258 Lift Kits .............................. 232 Squares ................ 257-258 Lift Slings .......................... 185 Tape Measures..... 254-255 Lift Table ............................ 192 Tape Measures ........... 255 Lifting Clamps ................... 313 Wheels ........................ 256 Lighters .............................. 322 Meat Processing ................. 102 Lights ................................. 374 Metal Benders/Brakes 197-198 Automotive 365-374, 411 Metal Detector ................... 239 Beacons ..................... 371 Metal Lathe ........................ 199

INDEX

Heat Exchangers .................. 38 Heat Gun ............................ 158 Heat Lamps .......................... 96 Heat Shrink Tubing ............ 363 Heaters Construction .............. 217 Convection ................. 214 Forced Air .......... 215-216 Gas Unit .................... 217 Portable ...................... 213 Radiant........................ 214 Height Gauge ..................... 261 Helmets-Welding ................ 324 Hemostats ........................... 302 Hex Keys .................... 269-270 Hinges ........................ 408, 412 Hitch Balls ......................... 354 Hitch Covers ...... 352, 355, 411 Hitch Extensions ................. 352 Hitch Pins ............. 80, 355-356 Hitch Tubes ......................... 352 Hitches .................. 79, 351-352 Hobby Tools ....... 293, 302-303 Hoists ....................... 6, 90, 186 Hole Saws ................... 166-167 Hooks .............. 86-89, 96, 299, 386-387, 408, 409 Horn ................................... 375 Hose Air ...................... 134-135 Braided ...................... 116 Discharge ........... 108, 116 Fittings ................... 28-32 Fuel .............................. 49 Grease Gun .................. 54 Hydraulic ....... 27-28, 233 Pneumatic .................... 46 Pressure Washer ........ 121 Propane ...................... 332 PVC ........................... 116 Reels ................... 135-136 Sandblasting .............. 146 Suction ................. 27, 116 Welding ..................... 322 Hose Control Clamps ........ 28, 116, 235 Hose Protection ........... 29 Hose Reels Air ...................... 135-136 Pressure Washer ........ 121 Welding ..................... 322 Hubs Splined ......................... 73 Trailer ........................ 335 Weld-On ....................... 73 Hydraulic Body & Frame Kits .............. 232 Breathers ................. 7, 40 Clutches ....................... 12 Cylinder Ends ...... 2-7, 43 Cylinders .........................5 End Caps .....................5, 7 Filters ........................... 41 Fittings ................... 28-36 Flow Control ............... 24 Gauges .................... 38-41

423

INDEX

Metal Marking Pens ........... 314 Metal Shears .............. 154, 198 Metal Stamps ..................... 302 Milling Machine ................. 200 Mirrors ............... 299, 348, 412 Moisture Detectors ............. 239 Motorcycle Accessories ...... 402 Motorcycle Lifts .......... 184-185 Motors Electric ........... 56-57, 404 Gerotor ........................ 14 Hydraulic ................ 13-14 Mounting Brackets ......... 9-10, 359, 369 Mounting Clamps .............. 389 Mounting Kits ............. 334-337 Mower Parts ..........................70 Mud Flaps .......................... 343 Mufflers Clamps ..........................79 Gas Engine ..............68-69 Multimeters ........................ 238

N Nail Pullers ........................ 295 Nailers.................. 151-152, 289 Nails ............................ 151-152 Network Cable ................... 407 Nibblers .............................. 154 Nozzles Pressure Washer ........ 123 Sandblasting ........ 143-146 Spray & Dip .............. 317 Water........................... 117 Welding .............. 315-316 Nut Drivers ........................ 162 Nut Splitters ....................... 287 Nuts ............................ 337, 411

O O-Rings ................................ 31 Oil Air Compressor ......... 129 Air Tool ..................... 154 Cans ............................. 52 Chain ............................ 68 Cutting ............... 194, 199 Drains .................. 52, 188 Filter Wrenches ... 235-236 Hydraulic ..................... 39 Jack ............................ 182 Motor ................... 68, 209 Pressure Washer ........ 118 Pumps .......................... 51 Oilers ............................... 52-54 Overalls .............................. 222

424

P.T.O. Components .............. 14 Packaged Rope ......................87 Padlocks ...................... 261-262 Pails .............................. 96-100 Paint Air Brushes ................ 143 Brushes ...................... 303 Can ............................ 141 Cleaning Kit .............. 141

Paint cont. Guns ................... 141-142 Kits ............................. 413 Markers ...................... 314 Mixer ......................... 143 Scraper ....................... 305 Spray Paint ......... 205-207 Strainers ..................... 143 Tank ........................... 141 Pallet Puller ........................ 192 Parts Trays ......................... 308 Parts Washers ..................... 193 Brushes ...................... 193 Pumps ........................ 193 Solvent........................ 193 Pet Supplies ................... 98-100 Pick-Up Tools ............. 300-301 Picks & Hooks ........... 294, 305 Pilot Lamps .......................... 62 Pin & Ring Kits O-Ring .......................... 83 P.T.O. Lock Pins ........... 81 Presto Pins .................... 81 Pull.............................. 355 Stabilizer Pin................. 78 U-Clip ........................... 82 Yoke .............................. 78 Pincers................................. 295 Pintle Hooks ....................... 356 Pipe Benders ...................... 253 Clamps ....................... 285 Cutters ....................... 252 Flaring Tools ............. 252 Threaders ................... 254 Tool Kit ..................... 252 Wrenches ... 253-254, 287 Piston Tools ................. 233-234 Planes .................................. 262 Pliers .................................. 282 Brake Spring .............. 244 Cutting ................ 280-282 Extra Long ................. 280 Leverage .................... 281 Linesman ........... 235, 281 Locking ..................... 235, 283-284, 326 Oil Filter .................... 235 Retaining Ring ... 282-283 Slip Joint ........... 235, 281 Snap Ring ........... 282-283 Tile.............................. 306 Valve Stem ......... 233-234 Welding Clamp .. 283, 326 Wire Strippers ........... 362 Plugs ....................... 60-61, 318 Plumb Bob ......................... 256 Plumbing Tools ................... 254 Pneumatics Cylinders ................ 42-43 Fittings ................... 45-46 Valves ..................... 44-45 Pocket Torches ................... 331 Polishing & Buffing ........ 158, 171-173 Pony Pumps ....................... 111 Power Adapters .................. 405

Power Bars ............................58 Power Cords .....................58-60 Power Packs ...................... 9-11 Power Tools Angle Grinders ... 156-157 Buffers ....................... 158 Drills .................. 156-158 Dust Collector ............ 160 Heat Gun ................... 158 Impact Wrenches ....... 156 Rotary Tools .............. 157 Routers........................ 156 Sanders ............... 156-158 Saws ................... 159-160 Shears ........................ 157 Precision Screwdrivers ....... 264 Presses Arbor ......................... 196 Drill ........................... 198 Shop ................... 194-196 Pressure Switches ...... 108, 130 Pressure Washers ........ 118-119 Accessories ........ 120-122 Brushes ...................... 124 Gauges ....................... 123 Guns .......................... 122 Hose & Hose Reels ... 121 Nozzles ...................... 123 Pumps/Pump Oil 118, 120 Wands ................. 121-122 Presto Pins .............................81 Primary Wire ...................... 358 Propane Torches ................. 332 Protractors .......................... 260 Pry Bars ...................... 294-295 Pullers ................................. 228 Bearing ....... 240, 245-247 Bolt-Type ........... 246-247 Dent ........................... 228 Flywheel ............. 246-247 Gear ........................... 248 Pulley ......................... 248 Seal ..................... 246-247 Steering Wheel ... 243-248 Pulleys .................................. 85 Blocks ..... 85-86, 386-387 Idler .............................. 75 Weld-On ................. 73-74 Pumps Air Compressor ......... 129 Barrel ...................... 49-52 Bilge .......................... 112 Drill ........................... 111 Fuel ........................ 48-51 Gear ........................... 110 Guzzler ...................... 110 Hydraulic ... 7, 12-13, 232 Jet ....................... 106-107 Oil ................................ 52 P.T.O. ........................... 14 Parts Washer .............. 193 Piston ........................... 50 Pony ........................... 111 Pressure Washer ........ 120 Sewage........................ 110 Submersible ........ 106-108 Sump .......................... 109

Sheaves ..................................86 Sheet Metal Clamps ............... 283, 326 Gauges ....................... 261 Shocks ................................. 408 Shop Cranes ....................... 185 Shop Presses ............... 194-196 Shovels ................................. 95 Shrink Tubing .................... 363 Silencer ................................ 45 Sledge Hammers ................ 293 Slide Hammers ... 228, 246-247 Slings ......................... 185, 391 Slip Hooks ............................ 89 Slow Moving Signs ............ 373 Snap Hooks .......................... 86 Snap Ring Pliers ......... 282-283 Snatch Blocks ....................... 86 Snips ................................... 289 Snow Thrower Accessories ... 70 Snowmobile Accessories .... 399 Soap ................................... 124 Sockets Adapters ..... 179-180, 272 Axle ........................... 242 Caps ........................... 272 Hex ..................... 269-270 Holders ............... 309-312 Impact ................ 179, 180 Individual ................... 271 Locknut ...................... 242 Security ...................... 267 Sensor ........................ 237 Sets ..................... 272-274 Torx ................... 180, 268 Soldering ..................... 329-331 Solenoid ......................... 19, 45 Solvent ............................... 193 Spare Tire Bracket/Carrier ........ 343-344 Spark Plug Tools ......... 240-241 Spark Plugs ........................... 69 Speakers ............................. 406 Splicing Sleeves ................... 92 Sponges ............................... 414 Spotlights ........................... 374 Spouts-Gas ............................ 49 Spreaders ............................ 284 Spring Clamps ................... 284 Springs .................... 83-84, 338 Squares ....................... 257-258 Squeegees ................... 211-212 Stainless Steel Products ................... 100-101 Stamps, Metal .................... 302 Stands.................................. 183 Staplers & Staples ...... 151, 289 Starting Fluid ..................... 209 Stay Straps ............................ 80 Steel ................................... 313 Steel Wool .......................... 229 Steering Tools .................... 243 Step Drill ............................ 165 Stethoscopes ....................... 249 Stop Collars ....................... 165 Storage ............... 308-311, 383, 399, 412-413

INDEX

Pumps cont. Safety cont. Transfer ........................ 51 Hard Hats .................. 221 Water .................. 109-112 Hearing Protection .... 220 Punch & Die Kits ............... 196 Hooks ........................ 393 Punches ....... 153, 290-291, 302 Knee Pads .......... 221, 226 PVC Fittings ...................... 114 Masks & Respirators . 219, 324 Q Tape ................... 227, 414 Quick Couplers ........... 132-133 Wear .... 221-222, 323-324 Safety Pins ............................ 81 R Sandblasters Radio .................................. 406 Abrasives ................... 147 Ramps ......................... 381-382 Cabinets .............. 143-144 Rasps ................................... 296 Gloves ........................ 146 Ratchets ....... 274-276, 391-392 Guns ................... 144-146 Air .............................. 148 Hoods ........................ 146 Buckles ...................... 394 Pressure ..................... 145 Cargo .................. 391-393 Siphon......................... 144 Clamps ....................... 285 Sanders Hoists ........................... 90 Air ...................... 147-148 Straps .................. 391-393 Automotive ......... 230-233 Wrenches ................... 277 Belt ............................ 147 Reamers ............................. 253 Electric ............... 156-158 Receptacles Sandpaper ................. 148, 158, & Plugs ............. 61, 318, 359 170-171, 230 Reciprocating Saws Saws ................................... 296 & Blades ......................... 178 Blades ........ 159, 178, 296 Reels Body .......................... 153 Air Hose ............. 135-136 Bow ........................... 296 Pressure Washer Hose 121 Chop .......................... 159 Welding Hose ............ 322 Cut-Off .............. 154, 159 Work Light ................... 63 Diamond .................... 160 Reflectors .................... 372-373 Drill ........................... 166 Regulators-Air ............. 138-139 Hacksaws ........... 295-296 Regulators-Gas .... 316, 321-322 Hole .................... 166-167 Remote ....................... 230, 248 Mini ........................... 169 Remote Controls ......... 384-385 Tile .................... 160, 165 Repair Kits... 204, 346-347, 361 Scaffolding ......................... 192 Reservoirs ...................... 11, 37 Scissor Jack ........................ 183 Rims ................................... 342 Scissors .............................. 303 Riveters .............. 153, 231, 288 Scraping Tools ............ 304-307 Rivets ......................... 231, 288 Screw Extractors ................ 286 Rod Screwdrivers ....... 263, 265, 268 Ends ....................... 22, 43 Bits ..................... 266-267 Storage ....................... 328 Flexible ...................... 263 Threaded .......................85 Hose Clamp ....... 117, 272 Welding .............. 319-330 Impact Drivers ........... 266 Roller Bearings .................. 337 Mini ................... 265, 298 Roller Cabinet .................... 310 Multi-Driver .............. 264 Roller Fairleads .................. 386 Offset ......................... 265 Roller Stands ...................... 201 Precision .................... 264 Rollers ......................... 198-201 Ratcheting .......... 265-266 Rope Torque......................... 264 Halter/Lead ...................97 Torx ........................... 268 Packaged .......................87 Scribes ................................ 304 Tow ............................ 388 Sculpting Tools .................. 305 Rotary Tools ....... 157, 168, 413 Sealants & Routers ................................ 156 Gasket Makers . 202-207, 360 Rubber Bumpers ................ 340 Seats ..................... 187, 400, 78 Rulers ......................... 258, 415 Security Bit Sets ......... 266-267 Rust Dissolver .................... 207 Security Lights.................... 262 Sensor Sockets ................... 237 S Sewage Pumps ................... 110 Safety................... 227, 372-373 Shackle Kits ....................... 337 Eyewear ..... 218, 258, 323 Shaft Collars ..........................75 First Aid Kits ............. 222 Sharpening Stones ..... 168, 298 Gloves 146, 223-226, 325 Shears ................. 154, 289, 413

425

INDEX

Strainer ....................... 107, 117 Strap Wrenches ........... 235-236 Straps................................... 414 Cargo .................. 391-394 Ratchet ............... 391-393 Tie Down ............ 391-394 Tow ............................ 388 Winch ......... 387-388, 395 Stud Detector ..................... 239 Stud Removers ............ 286-287 Suction Guns ........................ 51 Suction Hose ........................ 27 Sump Pumps ............... 108-109 Support Rod ....................... 286 Suspension Tools ............... 243 Sway Control Bar .............. 352 Switches ............ 20, 57, 61, 65, 248, 375, 405 Swivel Hooks ....................... 89

426

T-Square ............................. 258 Tachometer ................. 239, 379 Tack .............................. 96-100 Tailgate Nets ...................... 382 Tanks Air .............................. 129 Water .................. 107-109 Tape Conspicuity ................ 372 Electrical .................... 207 Grit ............................ 227 Holders ...................... 309 Magic Wrap ..................62 Marking ............. 227, 410 Reflective/Safety ....... 227 Teflon .................. 35, 325 Tape Measures ............ 254-255 Taps & Dies ................ 286-287 Tarps & Accessories .... 103-104 Bungee Cords...... 104-105 Canvas ........................ 103 Eyelets ........................ 104 Grabbers ..................... 104 Haystack ..................... 103 Multipurpose .............. 103 Repair ......................... 104 Tape ............................ 104 Tie-Downs .................. 105 Terminal Tools .... 236, 361-362 Terminals & Connectors Battery ....................... 410 Blocks .......................... 61 Kits ..................... 360-362 Receptacle ................. 318 Testers Antifreeze .................. 239 Battery ....................... 190 Circuit ........................ 238 Electrical .................... 237 Fence ............................ 92 Moisture .................... 239 Receptacle .................... 61 Thermostats .......................... 67 Third Hands ....................... 299 Thread Gauge ..................... 286 Thread Lockers .................. 203

Thread Repair ..... 240, 286-287 Threaded Rod ....................... 85 3-Point Hitch Replacement Parts Ball Sockets ................. 80 Conversion Bushings ... 80 Draw Bar ...................... 80 Flat Bars ....................... 80 Hitch Pins .................... 80 Lift Arm Pins ............... 80 Linch Pins .................... 81 P.T.O. Lock Pins .......... 81 Presto Pins ................... 81 Ratchet Jack ................. 79 Stay Straps ................... 80 Top Links ..................... 80 Throttle Cables.................... 131 Tie-Down Straps ....... 105, 391-394, 401 Tie-Down Rings.................. 389 Tile Tools Cutters ........................ 306 Floats .......................... 307 Grout Tools ......... 306-307 Nippers ....................... 306 Pliers........................... 306 Saws .................. 160, 165 Trowels ....................... 306 Timers ................................... 61 Timing Lights .................... 248 Tin Snips ............................ 289 Tires ............................ 340-343 Bracket ............... 343-344 Changers .................... 345 Gauges ............... 344, 411 Inflators ..................... 136 Repair ......... 346-347, 411 Rims .......................... 342 Strap Assembly .......... 392 Tools ................... 345-346 Tubes .................. 341-342 Turf ............................. 343 Valves ................. 345-346 Tool Storage Apron ......................... 309 Bags & Belts ...... 308-309 Boxes ......... 309-311, 383 Bucket Organizers ..... 308 Drawer Liner ..... 311, 415 Holders . 54, 266, 311-312 Magnetic ............ 308, 311 Rolls .......................... 308 Torches ............................... 331 Torque Wrenches ........ 276-277 Torx Bits ............................ 268 Torx Keys ........................... 268 Towels ................................ 209 Towing Bar ............................. 357 Hooks ........................... 89 Lights ......................... 371 Rings .................. 356-357 Ropes & Straps .......... 388 Tractor Lights ......................... 374 Seats ............................. 78 Toolboxes...................... 79

Trailer Balls/Couplers .... 352-355 Connectors ................. 359 Dollies ....................... 357 Hitches ............... 351-352 Levels ........................ 354 Lights ......... 366-369, 370 Mounts ................ 352-354 Wiring Systems ......... 358 Transfer Pumps .............. 49, 51 Transmission Adapter ........ 183 Transmission Jacks ............ 183 Traps ..................................... 97 Trays .......................... 308, 413 Trolleys .............................. 186 Truck Unloader ................... 383 Tubing Aluminum .................. 314 Benders ...................... 253 Copper ....................... 131 Cutters ....................... 252 Insulator ........................ 92 Steel ........................... 313 Tune-Up Kits .........................70 Turnbuckles ...........................88 Tweezers ............. 302-303, 329 Twine ..................................... 87

U U-Bolt Mounting Kits ........ 337 U-Joints ........ 81, 179-180, 272 Underbody Boxes .............. 383 Undercoating Guns ............ 140 Upholstery Tools ................ 231 Utility Hook ....................... 299 Utility Knives ............. 303-304

V V-Belts & Pulleys .............74-75 Vacuum Gauges ................. 131 Valves .................................... 21 Air .............................. 146 Ball ............................ 112 Caps ........................... 410 Check ........... 26, 107-110 Foot ............................ 108 Gate ........................... 112 Hydraulic ................ 15-26 Pneumatic ............... 44-45 Pressure Washer ........ 120 Tire ..................... 345-346 Tools ................... 233-234 Vests-Safety ....................... 222 Video Accessories .............. 407 Vises ........................... 200-201

W Wagons ..................................95 Washers ..................................82 Water Connectors ................. 117 Filters.......................... 108 Fittings ....... 107, 114-115 Hose ........................... 116 Pumps ................. 106-112 Tanks .................. 107-109 Valves ................. 107-108

Weld-On Hubs, Pulleys & Sprockets ......73-74 Welders ....................... 315-318 Welding Accessories ... 317, 325 Cable Connectors ...... 327 Carts .................. 317, 322 Clamp Pliers ...... 283, 326 Electrodes ... 319-320, 327 Extension Cord........... 318 Gas Regulator & Flow Meter.......... 316 Helmets & Goggles ....... 323-324 Instructional Video ..... 333 Magnets ..................... 326 Nozzle Spray & Dip .. 317 Nozzles ...................... 316 Rods & Storage ... 320, 328, 330 Tips .................... 316, 321 Wear ................... 323-325 Wire ............................ 317 Wheel Bearings .................. 337 Wheel Chocks .................... 347 Wheel Dollies ............ 184, 398 Wheel Dresser .................... 161 Wheel Spinner ...................... 79 Wheels Casters ........ 395-398, 410 Chop Saw .................. 177 Cutting ...... 159, 169-170, 175-178 Grinding ............ 162, 177 Nylon ................. 161, 174 Polishing & Buffing ........ 172-173 Sanding ............. 158, 169, 171, 175 Wire ............ 161, 174-175 Whip ..................................... 99 Winch Straps .............. 387, 395 Winches Cable .......................... 386 Cargo ......................... 394 Electric ............... 384-386 Hand ................... 386-387 Hydraulic ................... 385 Remote Controls 384-385 Windshield Tools ............... 231 Windshield Washer Kit ...... 375

Wire Brushes ...................... 174 Connectors ......... 359-362 Electrical .................... 410 Fence ............................ 92 Loom ................. 363, 410 Primary ...................... 358 Rope ........................ 87-88 Strippers & Crimpers . 361-362, 407 Terminals ... 360-361, 410 Tools .......................... 282 Trailer ........................ 358 Twister ....................... 282 Wheels ....... 161, 174-175 Wire Detector ..................... 239 Wiring Pigtails .................... 369 Woodworking Bevels ........................ 262 Work Gloves ...................... 226 Work Lights ............ 63-64, 373 Wrenches Adjustable .................. 277 Air .............................. 149 Automotive ........ 237, 248 Box-End .................... 279 Chain ......................... 253 Combo ................ 277-279 Crowfoot .................... 278 E-Torx ........................ 280 Holders ...................... 312 Impact ........................ 149 Lug ............................ 345 Master ........................ 254 Mini ........................... 278 Oil Filter ............. 235-236 Open Angle ................ 278 Pipe .................... 253, 287 Ratcheting .................. 277 Strap ................... 235-236 Stubby ........................ 278 Tap ............................. 286 Torque ................ 276-277

Y Yoke ............................... 22, 78

Z Zerk Tool ...............................54

Walter Storozuk joined our team on October 19th, 1959, when he was 19 years of age. He has given an incredible 48 years of Royal Service to Princess. During the course of his career, Walter ran the Surplus Centre located in a Quonset building on the Home Office property (affectionately called ‘Wally World’). When this closed, he went on to join the sales staff at Panet Road Store where he works today. Walter’s goal is to make 50 years with Princess.

INCHES

Gift Cards

• Versatile - choose from over 10,000 products • Saves you time looking for that special gift • It's just the right size and fits every budget COMMON MEASUREMENTS & CONVERSIONS 1/16 3/16 5/16 7/16 9/16 11/16 13/16 15/16

.0625 .1875 .3125 .4375 .5625 .6875 .8125 .9375

1/8 3/8 5/8 7/8

.125 .375 .625 .875

1/4 3/4

.25 .75

VOLUME CONVERSIONS CONVERT

MULTIPLY BY

tsp. fl. oz. pint quart gallon

ml ml l l l

4.92892161 29.5735297 0.473176475 0.94635295 3.7854118

°F TO °C

Subtract 32 from °F and divide the result by 9. Multiply that number by 5 to get °C

VOLUME MEASUREMENTS

1 tbsp. = 3 tsp. 1 cup = 16 tbsp. 1 fl. oz. = 2 tbsp. 1 cup = 8 fl. oz. 1 pint = 16 fl. oz. 1 quart = 2 pints 1 gallon = 4 quarts

WEIGHT CONVERSIONS WEIGHT MEASUREMENTS CONVERT

MULTIPLY BY

oz. lb.

g kg

28.3495231 0.45359237

1 lb. = 16 oz. 1 stone = 14 lbs. 1 ton (short) = 2, 000 lbs.

LENGTH CONVERSIONS LENGTH MEASUREMENTS CENTIMETERS

CONVERT

MULTIPLY BY

inch yard mile

cm m km

2.54 0.9144 1.609344

1 ft. = 12 inches = 30.48 cm. 1 yard = 3 feet = 0.9144 m. 1 mile = 1, 760 yards = 1.609 km

Royal Service Royal Service is essentially an attitude of providing outstanding service to everyone we come in contact with in the course of our days. Our Team Members are not limited to a set of rules or conditions, but instead are encouraged to use a common sense approach to doing the right thing for our customers.

Our Culture Through training, sharing information, and celebrating everything, we are committed to building a positive team environment where our people have the opportunity to excel and reach their individual potential.

Canada-Wide Growth Opportunities Princess Auto stores are located across Canada from coast-to-coast, and our home office is in Winnipeg, MB. As part of our culture, we encourage Team Members to take advantage of the many opportunities offered by a national company. All career openings are posted, and support to relocate throughout the company is provided.

JOIN ONE OF CANADA'S MOST UNIQUE RETAILERS...

building Canada's BEST RETAIL TEAM

Team Member Benefits Princess Auto provides an employer-sponsored, comprehensive benefit plan for all Team Members that work 30 hours/week or more. Some of the benefits include: Life Insurance, Health Insurance, and Dental Care.

Profit Sharing At Princess Auto, we recognize that each Team Member has an important role to play in the company's success. The opportunity to share in the profits of the company is offered through company-wide profit sharing. If you are interested in accepting new challenges that will lead to an exciting retail career, and want an opportunity to advance in a growing Canadian company, we invite you to consider a career at Princess Auto!

429

INDEX JOIN ONE OF CANADA'S MOST UNIQUE RETAILERS...

building Canada's BEST RETAIL TEAM Princess Auto Mini Application Name _______________________________________________________________ last

first

Phone (Home) ___________________________

middle

(Other) __________________________

Present Address _______________________________________________________ no. & street

city

province

Have you ever worked at Princess Auto before?

postal code

yes

If yes, where? ________________________________________________________ Do you know anyone employed at Princess Auto?

yes

If yes, name ___________________________ location ________________________ Position you are applying for _____________________________________________ Date available __________________________ Wage expected __________________ Are you willing to relocate? Hours Available From

MON

TUES

WEDS

THURS

FRI

yes

SAT

SUN

To Recent job (present or last position) _______________________________________ Company name ________________________________________________________ Address ______________________________________________________________ city

province

postal code

Dates worked from __________________________ to ________________________ Position held ________________________________ Salary ____________________ Reason for leaving _____________________________________________________ Educational Institutions

Program

Courses Taken

Highest Level Reached

High School University/College Business/Trade Other To the best of my knowledge, the information provided on this application form is true and complete. I understand that a false statement may disqualify me from employment or may be grounds for immediate dismissal. I hereby authorize Princess Auto Ltd. to conduct information, background, and credit checks to qualify me for employment, and I release them from all liability for damages in providing this information. In addition, I authorize my former employer(s) to provide references and employment information to Princess Auto Ltd.

Signature ________________________________ Date ________________ 430

Fax: 1-204-654-5256 E-mail: careers@princessauto.com Apply online at www.princessauto.com