Carpenter & Paterson Construction Fasteners

Catalog CF2009

CARPENTER & PATERSON, INC.

CARPENTER & PATERSON, INC. CONSTRUCTION FASTENERS TERMS and CONDITIONS of SALE Effective 3-31-2008 1. PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.

2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller’s acceptance of an order, but seller assumes no responsibility or liability, and will accept no backcharge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay.

3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller’s responsibility ceases and the title passes on delivery to the carrier.

4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded).

5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-toorder products (either published or unpublished) are non-cancelable / non-returnable.

6. PRODUCT APPLICATION: Seller’s products are intended for installation and service as illustrated or described in seller’s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication.

Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller.

In accordance with our product development program, we reserve the right to revise the design and application of our products without notification.

For latest product information, please contact the nearest Carpenter & Paterson office.

7. WARRANTY: Carpenter & Paterson, Paterson Inc. Inc warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product.

Where engineering design or fabrication work is supplied, Buyer’s acceptance of Seller’s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson’s product warranty. The foregoing constitutes the Purchaser’s sole and exclusive remedy under Carpenter & Paterson warranty.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MERCHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTIOUS ACT OR OMISSION. The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification.

8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities.

9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $150.00 will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors.

10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees.

www.carpenterandpaterson.com

Construction Fasteners Table of Contents SECTION I FINISHED / HEAVY / 2H / LOCK / INSERT SECTION II FLAT / SPLIT / FENDER / PLATE / BEVEL SECTION III REDUCING / REGULAR / SIGHT HOLE SECTION IV GRADE A / A325 / TAP / B7 SECTION V LAG / SELF TAPPING / DRIVE / DRYWALL SECTION VI LAG / ALL THREAD / STUDS / MACHINE / EYE SECTION VII STANDARD / LIGHT DUTY / DUCTILE IRON SECTION VIII WING / TOGGLE / DRYWALL ANCHORS SECTION IX BANG‐IT / WOOD‐KNOCKERS / ANCHOR BOLT SECTION X HAMMER‐IN / TOOLS / BITS / DROP‐IN / EXPANSION / SLEEVE / WEDGE / TAPCON

PAGE NUTS 4 WASHERS 6 ROD COUPLINGS 8 BOLTS 10 SCREWS 20 RODS 25 U‐BOLTS 34 WALL ANCHORS 36 CAST‐IN ANCHORS 40 CONCRETE ANCHORS 43

SECTION XI CRACKED CONCRETE TRUBOLT+ / SNAKE+ / VERTIGO+ / POWER‐STUD+ / WEDGE‐BOLT+ / PE1000+ / AC100+ / G5 63 SECTION XII POWER‐FAST+ / POWERSTICK / EPCON A7 & C6 / HIT HY‐50, HY20 & ICE SECTION XIII WOOD, STEEL & CONCRETE ROD HANGERS / SAMMY / VERTIGO SECTION XIV RECIPROCATING / BAND SAW / HOLE SAW

ADHESIVE 68 ROD HANGERS 70 SAW BLADES 77

cpsales@carpenterandpaterson.com

Construction Fasteners

Nuts

FINISHED HEX NUTS, GRADE A, NC

Figure 165

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Tap Size 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2"

WGT 100 PCS 0.68 1.02 1.49 2.96 3.60 7.11 11.8 17.5 26.4 39.8 51.7 73.0 88.1

Box Quantity 100 100 100 100 50 25 20 15 10 Bulk Bulk Bulk Bulk

Case Quantity 4800 4800 2400 1800 1200 600 360 180 120 Bulk Bulk Bulk Bulk

WGT 100 PCS 1.16 1.72 3.20 4.16 6.54 11.90 19.30 29.70 42.50 59.20 78.60 102.0 131.0 204.0 299.0 419.0 564.0 738.0 950.0

Box Quantity 100 100 100 50 50 25 20 15 10 Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk

Case Quantity 4800 3600 2400 1200 1200 600 360 180 120 Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk

HEAVY HEX NUTS, GRADE A, NC

Figure 165H

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Page 4

Tap Size 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3"

Section I

www.carpenterandpaterson.com

Construction Fasteners

Nuts

HEAVY HEX NUTS, ASTM A194, GRADE 2H

Figure 1652H

Available Finishes Plain, Electro Zinc & Hot Dipped Galvanized

Tap Size 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-3/4" 2"

WGT 100 PCS 3.20 6.54 11.9 19.3 29.7 42.5 59.2 78.6 102.0 131.0 204.0 299.0

Box Quantity 100 50 25 20 15 10 Bulk Bulk Bulk Bulk Bulk Bulk

Tap Size 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1"

WGT 100 PCS 0.84 1.76 4.10 8.55 12.3 19.6 27.3

Box Quantity 100 100 50 25 20 15 10

Tap Size 3/8" 1/2" 5/8" 3/4" 7/8"

WGT 100 PCS 13.0 15.0 19.0 22.0 24.0

Box Quantity 250 250 250 100 100

NYLON INSERT LOCKNUTS, GRADE A, NC

Fi Figure 165NYL

Available Finishes Electro Zinc, Stainless 304 & Stainless 316

CONCRETE INSERT NUTS

Figure 650N

Available Finishes

Plain & Electro Zinc

Section I

Page 5

cpsales@carpenterandpaterson.com

Construction Fasteners

Washers

FLAT WASHERS USS

Figure 103

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Rod Size 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2"

WGT 100 PCS

Rod Size 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1"

WGT 100 PCS

Rod Size 1/4" 5/16" 3/8" 1/2"

WGT 100 PCS

0.67 1.11 1.49 2.44 3.85 7.70 11.0 15.3 18.8 22.2 26.0 32.0 38.5

Box Quantity 100 100 100 50 50 25 20 15 10 Bulk Bulk Bulk Bulk

Case Quantity 7200 4800 2400 1800 1200 600 360 180 120 Bulk Bulk Bulk Bulk

Box Quantity 100 100 100 100 100 100 100 100 100

Case Quantity 7200 4800 4800 3600 2400 1800 900 600 300

Box Quantity 100 100 100 100

Case Quantity 2400 2400 1200 900

SPLIT LOCK WASHER

Figure 176

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

0.22 0.38 0.60 0.90 1.30 2.40 4.00 6.34 8.80

FENDER WASHER

Figure 8

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Page 6

2.25 2.21 3.16 5.59

Section II

www.carpenterandpaterson.com

Construction Fasteners

Washers

LIGHT DUTY WASHER PLATE

Figure 102 Rod Size

Hole Size

Steel Size

WGT 100 PCS

3/8" 1/2" 5/8" 3/4" 7/8" 1"

7/16" 9/16" 11/16" 13/16" 15/16" 1‐1/16"

1/8 X 2 X 2 1/8 X 3 X 3 1/8 X 4 X 4 1/8 X 5 X 5 1/8 X 6 X 6 3/16 X 2 X 2 3/16 X 3 X 3 3/16 X 4 X 4 3/16 X 5 X 5 3/16 X 6 X 6 1/4 X 2 X 2 1/4 X 2‐1/2 X 2‐1/2 1/4 X 3 X 3 1/4 X 4 X 4 / 1/4 X 5 X 5 1/4 X 6 X 6 3/8 X 2 X 2 3/8 X 2‐1/2 X 2‐1/2 3/8 X 3 X 3 3/8 X 4 X 4 3/8 X 5 X 5 3/8 X 6 X 6

14.0 32.0 57.0 89.0 128.0 21.0 48.0 83.0 133.0 191.0 28.0 44.0 64.0 113.0 177.0 255.0 42.0 66.0 95.0 170.0 266.0 383.0

Available Finishes Plain, Painted, Hot Dipped Galvanized

BEVEL WASHER

Figure 706

Available Finishes Plain, Electro Zinc & Hot Dipped Galvanized

Section II

Rod Size

WGT 100 PCS

Box Quantity

3/8" 1/2" 5/8" 3/4" 7/8" 1"

7.4 7.7 13.1 14.1 32.5 29.4

600 600 300 300 100 100

Page 7

cpsales@carpenterandpaterson.com

Construction Fasteners

Washers

WASHER PLATE

Figure 260

Available Finishes Plain, Painted, Hot Dipped Galvanized

Rod Size

Steel Size

WGT 100 PCS

3/8" 1/2" 5/8" 3/4" 7/8" 1" 1‐1/4" 1‐1/2" 1‐3/4" 2" 2‐1/4" 2‐1/2" 2‐3/4" 3"

1/4 X 3 X 3 1/4 X 3 X 3 3/8 X 3 X 3 3/8 X 4 X 4 1/2 X 4 X 4 1/2 X 4 X 4 1/2 X 5 X 5 5/8 X 5 X 5 5/8 X 5 X 5 3/4 X 6 X 6 3/4 X 6 X 6 3/4 X 6 X 6 3/4 X 6 X 6 3/4 X 6 X 6

63.0 61.0 95.0 160.0 217.0 215.0 328.0 405.0 388.0 447.0 662.0 640.0 616.0 589.0

R d Couplings Rod li REDUCING ROD COUPLING

Figure 123R Rod Size 1/4" X 3/8" 3/8" X 1/2" 1/2" X 5/8" 5/8" X 3/4"

Available Finishes Plain & Electro Zinc

Page 8

3/4" X 7/8" 7/8" X 1" 1" X 1‐1/8" 1‐1/8" X 1‐1/4"

WGT 100 PCS

3.89 6.68 11.0 21.7 55.0 70.0 87.0 98.0

Box Quantity 100 100 50 25

20 15 10 Bulk

Case Quantity 1250 625 400 200 Bulk Bulk Bulk Bulk

Section III

www.carpenterandpaterson.com

Construction Fasteners

Rod Couplings

ROD COUPLING

Figure 123

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Tap Size 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2"

WGT 100 PCS 5.70 6.97 8.21 11.0 16.9 28.5 54.2 42.9 72.0 87.6 100.0 200.0

Box Quantity 100 100 100 50 25 20 15 10 Bulk Bulk Bulk Bulk

Case Quantity 1000 500 500 400 250 150 75 75 75 50 30 20

WGT 100 PCS 5.70 6.97 8.21 11.0 16.9 28.5 54.2 42.9 72.0 87.6 100.0 200.0

Box Quantity 100 100 100 50 25 20 15 10 Bulk Bulk Bulk Bulk

Case Quantity 1000 500 500 400 250 150 75 75 75 50 30 20

ROD COUPLING WITH SIGHT HOLE

Figure 123W

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Section III

Tap Size 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2"

Page 9

cpsales@carpenterandpaterson.com

Construction Fasteners

Bolts

HEX BOLTS, GRADE A

Figure BLT

*Available in different diameters and lengths Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Page 10

Bolt Size

WGT 100 PCS

Case Quantity

1/4 X 1/2" 1/4 X 3/4" 1/4 X 1" 1/4 X 1‐1/4" 1/4 X 1‐1/2" 1/4 X 1‐3/4" 1/4 X 2" 1/4 X 2‐1/4' 1/4 X 2‐1/2" 1/4 X 2‐3/4" 1/4 X 3" 1/4 X 3‐1/4" 1/4 X 3‐1/2" 1/4 X 4" 1/4 X 4‐1/2" / / 1/4 X 5" 1/4 X 5‐1/2" 1/4 X 6" 1/4 X 6‐1/2" 1/4 X 7" 1/4 X 7‐1/2" 1/4 X 8" 5/16 X 1/2" 5/16 X 3/4" 5/16 X 1" 5/16 X 1‐1/4" 5/16 X 1‐1/2" 5/16 X 1‐3/4" 5/16 X 2" 5/16 X 2‐1/4" 5/16 X 2‐1/2" 5/16 X 2‐3/4" 5/16 X 3" 5/16 X 3‐1/4" 5/16 X 3‐1/2" 5/16 X 3‐3/4" 5/16 X 4" 5/16 X 4‐1/2" 5/16 X 5"

1.18 1.44 1.67 2.02 2.39 2.70 3.07 3.40 3.75 4.06 4.35 4.64 5.10 5.75 6.36 6.92 7.74 8.39 9.19 9.88 10.6 11.3 1.82 2.33 2.74 3.23 3.82 4.27 4.82 5.39 5.95 6.46 6.91 7.45 8.00 8.41 8.98 10.1 11.2

5000 4000 3600 2800 2400 1800 1600 1300 1300 900 900 800 750 700 600 600 500 500 500 500 500 400 3000 2600 2200 1800 1600 1300 1200 900 900 750 700 600 600 500 450 400 300

Section IV

www.carpenterandpaterson.com

Construction Fasteners

Bolts

HEX BOLTS, GRADE A Bolt Size

WGT 100 PCS

Case Quantity

Bolt Size

WGT 100 PCS

Case Quantity

5/16 X 5‐1/2" 5/16 X 6" 5/16 X 6‐1/2" 5/16 X 7" 5/16 X 7‐1/2" 5/16 X 8" 3/8 X 1/2" 3/8 X 3/4" 3/8 X 1" 3/8 X 1‐1/4" 3/8 X 1‐1/2" 3/8 X 1‐3/4" 3/8 X 2" 3/8 X 2‐1/4" 3/8 X 2‐1/2" / / 3/8 X 2‐3/4" 3/8 X 3" 3/8 X 3‐1/4" 3/8 X 3‐1/2" 3/8 X 3‐3/4" 3/8 X 4" 3/8 X 4‐1/2" 3/8 X 5" 3/8 X 5‐1/2" 3/8 X 6" 3/8 X 6‐1/2" 3/8 X 7" 3/8 X 7‐1/2" 3/8 X 8" 7/16 X 1" 7/16 X 1‐1/4" 7/16 X 1‐1/2" 7/16 X 2" 7/16 X 2‐1/2" 7/16 X 3" 7/16 X 3‐1/2" 7/16 X 4" 7/16 X 4‐1/2" 7/16 X 5"

12.3 13.3 14.2 15.2 16.3 17.3 2.89 3.40 4.03 4.78 5.54 6.22 6.94 7.69 8.52 9.24 10.0 10.8 11.5 12.4 13.1 14.4 16.0 17.5 19.1 20.8 22.4 23.9 25.4 5.67 6.50 7.51 9.57 11.5 13.6 15.6 17.9 20.0 22.1

300 300 300 300 300 300 2100 1800 1500 1300 1000 1000 800 700 650 600 500 425 400 325 325 300 300 250 250 250 250 250 250 1100 950 750 600 450 400 300 250 225 175

7/16 X 6" 7/16 X 7" 7/16 X 8" 1/2 X 3/4" 1/2 X 1" 1/2 X 1‐1/4" 1/2 X 1‐1/2" 1/2 X 1‐3/4" 1/2 X 2" 1/2 X 2‐1/4" 1/2 X 2‐1/2" 1/2 X 2‐3/4" 1/2 X 3" 1/2 X 3‐1/4" 1/2 X 3‐1/2" / / 1/2 X 3‐3/4" 1/2 X 4" 1/2 X 4‐1/2" 1/2 X 5" 1/2 X 5‐1/2 1/2 X 6" 1/2 X 6‐1/2" 1/2 X 7" 1/2 X 7‐1/2 1/2 X 8" 1/2 X 8‐1/2" 1/2 X 9" 1/2 X 9‐1/2" 5/8 X 1" 5/8 X 1‐1/4" 5/8 X 1‐1/2" 5/8 X 1‐3/4" 5/8 X 2" 5/8 X 2‐1/4" 5/8 X 2‐1/2" 5/8 X 2‐3/4" 5/8 X 3" 5/8 X 3‐1/4" 5/8 X 3‐1/2"

26.2 28.4 30.5 7.26 8.29 9.30 10.4 11.8 13.3 14.6 16.1 17.3 18.8 20.2 21.5 22.9 24.1 26.6 29.6 32.4 35.1 37.3 39.4 43.0 44.8 49.0 51.7 54.5 14.6 16.1 18.0 19.8 22.4 24.2 26.3 28.1 30.5 32.4 34.6

175 175 175 900 750 650 600 500 450 400 325 300 300 250 250 200 200 175 150 150 150 150 150 125 125 120 120 120 400 350 300 300 250 225 200 200 175 150 150

Section IV

Page 11

cpsales@carpenterandpaterson.com

Construction Fasteners

Bolts

HEX BOLTS, GRADE A Bolt Size

WGT 100 PCS

Case Quantity

Bolt Size

WGT 100 PCS

Case Quantity

5/8 X 3‐3/4" 5/8 X 4" 5/8 X 4‐1/2" 5/8 X 5" 5/8 X 5‐1/2" 5/8 X 6" 5/8 X 6‐1/2" 5/8 X 7" 5/8 X 7‐1/2" 5/8 X 8" 5/8 X 8‐1/2" 5/8 X 9" 5/8 X 9‐1/2" 5/8 X 10" 5/8 X 10‐1/2" 5/8 X 11" 5/8 X 11" 5/8 X 11‐1/2" 5/8 X 12" 3/4 X 1" 3/4 X 1‐1/4" 3/4 X 1‐1/2" 3/4 X 1‐3/4" 3/4 X 2" 3/4 X 2‐1/4" 3/4 X 2‐1/2" 3/4 X 2‐3/4" 3/4 X 3" 3/4 X 3‐1/4" 3/4 X 3‐1/2" 3/4 X 3‐3/4" 3/4 X 4" 3/4 X 4‐1/2" 3/4 X 5" 3/4 X 5‐1/2" 3/4 X 6" 3/4 X 6‐1/2" 3/4 X 7" 3/4 X 7‐1/2" 3/4 X 8"

37.9 40.1 44.4 48.7 53.0 57.3 60.2 64.4 68.7 72.9 77.2 81.4 85.6 89.9 94.1 98 3 98.3 102.6 106.8 23.6 27.1 29.7 32.3 35.1 38.2 41.3 44.5 47.6 50.7 53.8 56.9 60.0 66.2 72.4 78.7 84.9 88.8 94.9 101.1 107.2

125 125 100 90 75 75 70 70 60 60 75 75 75 75 70 70 70 60 250 225 200 200 180 150 140 130 120 110 100 90 85 80 65 60 60 60 60 60 60

3/4 X 8‐1/2" 3/4 X 9" 3/4 X 9‐1/2" 3/4 X 10" 3/4 X 10‐1/2" 3/4 X 11" 3/4 X 11‐1/2" 3/4 X 12" 7/8 X 1‐1/2" 7/8 X 1‐3/4" 7/8 X 2" 7/8 X 2‐1/4" 7/8 X 2‐1/2" 7/8 X 2‐3/4" 7/8 X 3" 7/8 1/4" 7/8 X 3‐1/ 4" 7/8 X 3‐1/2" 7/8 X 3‐3/4" 7/8 X 4" 7/8 X 4‐1/2" 7/8 X 5" 7/8 X 5‐1/2" 7/8 X 6" 7/8 X 6‐1/2" 7/8 X 7" 7/8 X 7‐1/2" 7/8 X 8" 7/8 X 8‐1/2" 7/8 X 9" 7/8 X 9‐1/2" 7/8 X 10" 7/8 X 10‐1/2" 7/8 X 11" 7/8 X 12" 1 X 2" 1 X 2‐1/4" 1 X 2‐1/2" 1 X 2‐3/4" 1 X 3"

113.8 119.5 125.7 131.8 138.0 144.1 150.3 156.4 42.3 45.7 49.5 53.5 58.0 62.3 66.5 70 70.8 8 76.1 79.3 83.5 92.0 100.5 109.0 117.5 126.0 134.5 143.0 151.0 160.0 168.0 177.0 185.5 194.0 202.5 219.5 67.6 73.1 77.8 83.9 89.5

60 60 50 50 50 50 40 40 140 130 120 110 105 90 90 80 70 65 60 60 50 45 45 45 45 45 40 40 40 40 40 35 35 30 90 85 80 70 65

Page 12

Section IV

www.carpenterandpaterson.com

Construction Fasteners

Bolts

HEX BOLTS, GRADE A Bolt Size

WGT 100 PCS

Case Quantity

Bolt Size

WGT 100 PCS

Case Quantity

1 X 3‐1/4" 1 X 3‐1/2" 1 X 3‐3/4" 1 X 4" 1 X 4‐1/2" 1 X 5" 1 X 5‐1/2" 1 X 6" 1 X 6‐1/2" 1 X 7" 1 X 7‐1/2" 1 X 8" 1 X 8‐1/2" 1 X 9" 1 X 9‐1/2" 1 X 10" 1 X 10‐1/2" 1 X 11" 1 X 12" 1‐1/8 X 2‐1/2" 1‐1/8 X 3" 1‐1/8 X 3‐1/2" 1‐1/8 X 4" 1‐1/8 X 4‐1/2" 1‐1/8 X 5" 1‐1/8 X 5‐1/2" 1‐1/8 X 6" 1‐1/8 X 6‐1/2" 1‐1/8 X 7" 1‐1/8 X 8" 1‐1/8 X 9" 1‐1/8 X 9‐1/2" 1‐1/8 X 10" 1‐1/8 X 11" 1‐1/8 X 12" 1‐1/4 X 2‐1/2" 1‐1/4 X 3" 1‐1/4 X 3‐1/2" 1‐1/4 X 4"

94.9 100.4 105.8 111.3 122.2 133.2 144.1 155.0 166.0 176.9 187.9 198.7 209.7 220.6 231.5 242 5 242.5 253.4 264.3 286.2 105.4 124.0 134.8 148.5 162.2 175.9 189.6 203.3 216.1 229.8 257.2 284.6 298.3 312.0 339.4 366.8 147.0 157.5 174.5 191.5

60 60 50 50 40 40 40 40 35 35 30 30 30 30 30 30 25 25 25 50 40 40 40 35 30 25 25 25 25 20 15 15 15 15 15 40 35 35 30

1‐1/4 X 4‐1/2" 1‐1/4 X 5" 1‐1/4 X 5‐1/2" 1‐1/4 X 6" 1‐1/4 X 6‐1/2" 1‐1/4 X 7" 1‐1/4 X 7‐1/2" 1‐1/4 X 8" 1‐1/4 X 8‐1/2" 1‐1/4 X 9" 1‐1/4 X 9‐1/2" 1‐1/4 X 10" 1‐1/4 X 11" 1‐1/4 X 12" 1‐1/2 X 3" 1‐1/ 1/2 2 X 3‐1/ 1/2" 2" 1‐1/2 X 4" 1‐1/2 X 4‐1/2" 1‐1/2 X 5" 1‐1/2 X 5‐1/2" 1‐1/2 X 6" 1‐1/2 X 6‐1/2" 1‐1/2 X 7" 1‐1/2 X 7‐1/2" 1‐1/2 X 8" 1‐1/2 X 9" 1‐1/2 X 10" 1‐1/2 X 11" 1‐1/2 X12" 1‐3/4 X 4‐1/2" 1‐3/4 X 5" 1‐3/4 X 5‐1/2" 1‐3/4 X 6" 1‐3/4 X 6‐1/2" 1‐3/4 X 7" 1‐3/4 X 8" 2 X 6" 2 X 7" 2 X 8"

208.5 225.5 242.5 259.5 275.4 292.4 309.4 326.4 343.4 360.4 377.4 394.4 428.4 462.4 244.7 267 267.6 6 292.2 316.7 341.3 365.8 390.4 414.1 437.9 462.4 487.0 536.1 585.2 634.3 683.4 430.0 490.0 550.0 580.0 625.0 650.0 720.0 775.0 865.0 960.0

30 25 25 20 20 20 18 18 15 15 15 10 10 10 25 25 20 20 18 15 15 15 15 12 12 10 10 10 10 10 10 8 8 6 6 6 5 4 4

Section IV

Page 13

cpsales@carpenterandpaterson.com

Construction Fasteners

Bolts

STRUCTURAL BOLTS, A325

Figure BLT A325

Available Finishes Plain & Hot Dipped Galvanized

Page 14

Bolt Size

WGT 100 PCS

Case Quantity

1/2 X 1‐1/4" 1/2 X 1‐1/2" 1/2 X 1‐3/4" 1/2 X 2" 1/2 X 2‐1/4" 1/2 X 2‐1/2" 1/2 X 2‐3/4" 1/2 X 3" 1/2 X 3‐1/2" 1/2 X 4" 5/8 X 1‐1/2" 5/8 X 1‐3/4" 5/8 X 2" 5/8 X 2‐1/4" 5/8 X 2‐1/2" / / 5/8 X 2‐3/4" 5/8 X 3" 5/8 X 3‐1/2" 5/8 X 4" 5/8 X 4‐1/2" 5/8 X 5" 5/8 X 5‐1/2" 5/8 X 6" 5/8 X 6‐1/2" 5/8 X 7" 5/8 X 7‐1/2" 5/8 X 8" 3/4 X 1‐1/2" 3/4 X 1‐3/4" 3/4 X 2" 3/4 X 2‐1/4" 3/4 X 2‐1/2" 3/4 X 2‐3/4" 3/4 X 3" 3/4 X 3‐1/4" 3/4 X 3‐1/2" 3/4 X 3‐3/4" 3/4 X 4" 3/4 X 4‐1/2"

11.7 12.8 14.1 15.5 16.8 18.2 19.5 20.9 23.6 26.2 21.7 23.5 25.6 27.7 29.8 31.9 34.0 39.1 42.3 46.5 50.7 54.9 59.1 62.9 67.1 71.3 75.5 32.9 36.5 39.0 42.0 45.0 48.1 51.1 54.1 57.1 60.1 63.2 69.2

1710 1560 1420 1290 1190 1100 1000 950 750 600 1050 900 875 775 725 600 600 500 400 350 300 275 250 225 200 200 175 650 650 550 525 475 425 400 375 350 325 300 275

Section IV

www.carpenterandpaterson.com

Construction Fasteners

Bolts

STRUCTURAL BOLTS, A325 Bolt Size

WGT 100 PCS

Case Quantity

Bolt Size

WGT 100 PCS

Case Quantity

3/4 X 5" 3/4 X 5‐1/4" 3/4 X 5‐1/2" 3/4 X 6" 3/4 X 6‐1/2" 3/4 X 7" 3/4 X 7‐1/2" 3/4 X 8" 3/4 X 9" 3/4 X 10" 7/8 X 2" 7/8 X 2‐1/4" 7/8 X 2‐1/2" 7/8 X 2‐3/4" 7/8 X 3" / 7/8 X 3‐1/4" 7/8 X 3‐1/2" 7/8 X 3‐3/4" 7/8 X 4" 7/8 X 4‐1/2" 7/8 X 5" 7/8 X 5‐1/2" 7/8 X 6" 7/8 X 6‐1/2" 7/8 X 7" 7/8 X 7‐1/2" 7/8 X 8" 7/8 X 8‐1/2" 7/8 X 9‐1/2" 1 X 2" 1 X 2‐1/4" 1 X 2‐1/2" 1 X 2‐3/4" 1 X 3" 1 X 3‐1/4" 1 X 3‐1/2" 1 X 3‐3/4" 1 X 4" 1 X 4‐1/4"

75.2 78.2 81.3 87.1 92.9 99.0 105.0 111.0 123.0 135.0 56.6 60.1 64.2 68.3 72.4 76.6 80.7 84.5 88.9 98.0 106.0 114.0 122.0 130.0 138.0 145.0 155.0 163.0 179.0 78.8 83.4 88.0 94.0 99.0 104.0 110.0 115.0 120.0 126.0

225 225 225 200 150 140 135 120 100 60 425 375 350 325 300 275 250 250 225 200 175 150 135 125 120 110 90 85 80 300 275 250 225 225 200 175 175 175 110

1 X 4‐1/2" 1 X 4‐3/4" 1 X 5" 1 X 5‐1/2" 1 X 6" 1 X 6‐1/2" 1 X 7" 1 X 7‐1/2" 1 X 8" 1‐1/8 X 2‐1/2" 1‐1/8 X 2‐3/4" 1‐1/8 X 3" 1‐1/8 X 3‐1/2" 1‐1/8 X 4" 1‐1/8 X 4‐1/4" / / 1‐1/8 X 4‐1/2" 1‐1/8 X 4‐3/4" 1‐1/8 X 5" 1‐1/8 X 5‐1/2"" 1‐1/8 X 6" 1‐1/8 X 6‐1/2" 1‐1/8 X 7" 1‐1/8" 7‐1/2" 1‐1/8 X 8" 1‐1/4 X 3" 1‐1/4 X 3‐1/4" 1‐1/4 X 3‐1/2" 1‐1/4 X 3‐3/4" 1‐1/4 X 4" 1‐1/4 X 4‐1/4" 1‐1/4 X 4‐1/2" 1‐1/4 X 4‐3/4" 1‐1/4 X 5" 1‐1/4 X 5‐1/2" 1‐1/4 X 6" 1‐1/4 X 6‐1/2" 1‐1/4 X 7" 1‐1/4 X 7‐1/2" 1‐1/4 X 8"

131.0 137.0 142.0 153.0 163.0 173.0 184.0 194.0 206.0 115.0 151.5 128.0 141.0 155.0 162.0 168.0 175.0 182.0 196.0 209.0 222.0 235.0 249.0 263.0 167.0 175.0 183.0 192.0 200.0 209.0 217.0 225.0 234.0 251.0 267.0 283.0 300.0 317.0 333.0

150 110 130 110 105 100 90 80 75 170 170 170 135 125 125 115 110 105 90 85 75 70 70 60 130 125 120 110 100 95 90 85 85 75 70 65 55 50 50

Section IV

Page 15

cpsales@carpenterandpaterson.com

Construction Fasteners

Bolts

TAP BOLTS, GRADE A

Figure TBLT

Available Finishes Plain & Electro Zinc

Page 16

Bolt Size

WGT 100 PCS

Case Quantity

1/4 X 1/2" 1/4 X 3/4" 1/4 X 1" 1/4 X 1‐1/4" 1/4 X 1‐1/2" 1/4 X 1‐3/4" 1/4 X 2" 1/4 X 2‐1/4" 1/4 X 2‐1/2" 1/4 X 2‐3/4" 1/4 X 3" 1/4 X 3‐1/2" 1/4 X 4" 1/4 X 4‐1/2" 1/4 X 5" / 1/4 X 5‐1/2" 1/4 X 6" 5/16 X 1" 5/16 X 1‐1/4" 5/16 X 1‐1/2" 5/16 X 1‐3/4" 5/16 X 2" 5/16 X 2‐1/4" 5/16 X 2‐1/2" 5/16 X 2‐3/4" 5/16 X 3" 5/16 X 3‐1/2" 5/16 X 4" 5/16 X 4‐1/2" 5/16 X 5" 5/16 X 5‐1/2" 5/16 X 6" 3/8 X 1" 3/8 X 1‐1/4" 3/8 X 1‐1/2" 3/8 X 1‐3/4" 3/8 X 2"

1.18 1.44 1.67 2.01 2.36 2.70 3.07 3.40 3.75 4.06 4.35 5.10 5.75 6.36 6.92 7.74 8.39 2.74 3.32 3.82 4.27 4.82 5.39 5.95 6.91 6.90 8.00 8.98 10.1 11.1 12.3 13.3 4.03 4.78 5.54 6.22 6.94

4800 3500 3600 2800 2400 1800 1600 1300 1300 900 900 750 700 600 600 500 500 2200 1800 1600 1300 1200 900 900 800 700 600 450 400 300 300 300 1500 1300 1000 1000 800

Section IV

www.carpenterandpaterson.com

Construction Fasteners

Bolts

TAP BOLTS, GRADE A Bolt Size

WGT 100 PCS

Case Quantity

Bolt Size

WGT 100 PCS

Case Quantity

3/8 X 2‐1/4" 3/8 X 2‐1/2" 3/8 X 2‐3/4" 3/8 X 3" 3/8 X 3‐1/2" 3/8 X 4" 3/8 X 4‐1/2" 3/8 X 5" 3/8 X 5‐1/2" 3/8 X 6" 3/8 X 7" 3/8 X 8" 7/16 X 1" 1/2 X 1" 1/2 X 1‐1/4" / / 1/2 X 1‐1/2" 1/2 X 1‐3/4" 1/2 X 2" 1/2 X 2‐1/4" 1/2 X 2‐1/2" 1/2 X 2‐3/4" 1/2 X 3" 1/2 X 3‐1/2" 1/2 X 4" 1/2 X 4‐1/2" 1/2 X 5" 1/2 X 5‐1/2" 1/2 X 6" 1/2 X 6‐1/2" 1/2 X 7" 1/2 X 8" 5/8 X 1‐1/2" 5/8 X 1‐3/4" 5/8 X 2" 5/8 X 2‐1/4" 5/8 X 2‐1/2" 5/8 X 3"

7.69 8.50 9.30 10.00 11.50 13.10 14.40 16.00 17.50 19.10 22.40 25.40 5.67 8.29 9.30 10.4 11.8 13.3 14.6 16.1 17.3 18.8 21.5 24.1 26.6 29.6 32.4 35.1 37.3 39.4 44.8 19.8 19.8 22.4 24.2 26.3 30.5

700 650 600 500 400 325 300 300 250 250 250 250 900 750 650 600 500 450 400 325 300 300 250 200 175 150 150 150 150 150 125 300 300 250 225 200 175

5/8 X 3‐1/2" 5/8 X 4" 5/8 X 4‐1/2" 5/8 X 5" 5/8 X 5‐1/2" 5/8 X 6" 5/8 X 7" 5/8 X 8" 5/8 X 9" 3/4 X 2" 3/4 X 2‐1/2" 3/4 X 3" 3/4 X 3‐1/4" 3/4 X 3‐1/2" 3/4 X 4" / 3/4 X 4‐1/2" 3/4 X 5" 3/4 X 5‐1/2" 3/4 X 6" 3/4 X 7" 3/4 X 8" 3/4 X 11 7/8 X 2‐1/2" 7/8 X 3" 7/8 X 3‐1/2" 7/8 X 4" 7/8 X 4‐1/2" 7/8 X 5" 7/8 X 6" 1 X 2" 1 X 2‐1/2" 1 X 3" 1 X 3‐1/2" 1 X 4" 1 X 4‐1/2" 1 X 5" 1 X 6"

34.6 38.9 44.4 48.7 53.0 57.3 64.4 72.9 72.7 34.4 40.3 46.0 48.9 52.4 58.5 66.2 72.4 78.7 84.9 94.9 107.2 129.5 58.0 66.5 76.1 83.5 92.0 100.5 117.5 66.1 77.8 89.5 100.4 111.3 122.2 133.2 155.0

150 125 100 90 75 75 70 60 75 150 140 120 110 100 85 80 65 60 60 60 60 50 105 90 70 60 60 50 45 80 80 65 60 60 40 40 40

Section IV

Page 17

cpsales@carpenterandpaterson.com

Construction Fasteners

Bolts

BOLTS, A193 GRADE B7

Figure BLT B7

Available Finishes Plain

Page 18

Bolt Size

WGT 100 PCS

Case Quantity

1/2 X 1" 1/2 X 1‐1/4" 1/2 X 1‐1/2" 1/2 X 1‐3/4" 1/2 X 2‐1/4" 1/2 X 2‐1/2" 1/2 X 2‐3/4" 1/2 X 3" 1/2 X 3‐1/4" 1/2 X 3‐1/2" 1/2 X 3‐3/4" 1/2 X 4" 1/2 X 4‐1/2" 1/2 X 4‐3/4" 1/2 X 5" / 1/2 X 5‐1/4" 1/2 X 5‐1/2" 1/2 X 6" 5/8 X 1‐1/4" 5/8 X 1‐1/2" 5/8 X 1‐3/4" 5/8 X 2" 5/8 X 2‐1/4" 5/8 X 2‐1/2" 5/8 X 2‐3/4" 5/8 X 3" 5/8 X 3‐1/4" 5/8 X 3‐1/2" 5/8 X 3‐3/4" 5/8 X 4" 5/8 X 4‐1/4" 5/8 X 4‐1/2" 5/8 X 4‐3/4" 5/8 X 5" 5/8 X 5‐1/2" 5/8 X 6" 5/8 X 6‐1/2"

9.2 10.3 11.6 13.0 15.7 17.1 18.5 19.9 21.3 22.6 23.8 25.4 28.2 29.6 30.9 32.2 33.7 36.4 16.9 18.7 20.7 22.8 25.0 27.1 29.3 31.4 33.6 35.8 37.9 40.1 42.3 44.4 46.5 48.7 53.0 57.3 60.3

400 375 300 275 225 225 200 200 175 150 150 150 125 125 125 100 100 100 225 200 175 175 150 125 125 100 100 100 100 90 85 80 75 75 70 65 60

Section IV

www.carpenterandpaterson.com

Construction Fasteners

Bolts

BOLTS, A193 GRADE B7 Bolt Size

WGT 100 PCS

Case Quantity

Bolt Size

WGT 100 PCS

Case Quantity

3/4 X 1‐1/2" 3/4 X 1‐3/4" 3/4 X 2" 3/4 X 2‐1/4" 3/4 X 2‐1/2" 3/4 X 2‐3/4" 3/4 X 3" 3/4 X 3‐1/4" 3/4 X 3‐1/2" 3/4 X 3‐3/4" 3/4 X 4" 3/4 X 4‐1/2" 3/4 X 5" 3/4 X 5‐1/2" 3/4 X 6" 7/8 X 2" 7/8 X 2" 7/8 X 2‐1/4" 7/8 X 2‐1/2" 7/8 X 2‐3/4" 7/8 X 3" 7/8 X 3‐1/4" 7/8 X 3‐1/2" 7/8 X 3‐3/4" 7/8 X 4" 7/8 X 4‐1/2" 7/8 X 5" 7/8 X 5‐1/2" 7/8 X 6" 1 X 2" 1 X 2‐1/4" 1 X 2‐1/2" 1 X 2‐3/4" 1 X 3" 1 X 3‐1/4" 1 X 3‐1/2" 1 X 3‐3/4" 1 X 4" 1 X 4‐1/2" 1 X 5"

29.7 32.3 35.1 38.2 41.3 44.5 47.6 50.7 53.8 57.2 60.0 66.2 72.4 78.6 84.9 51 1 51.1 55.0 59.2 63.4 67.7 71.9 76.1 80.3 85.6 93.0 101.5 110.0 118.4 70.1 74.8 79.9 85.4 90.9 96.5 102.0 108.0 113.0 124.1 135.0

125 120 100 100 90 85 80 75 70 65 60 55 45 45 40 75 70 65 60 55 50 50 45 45 40 35 35 30 50 50 45 40 40 40 35 35 35 30 25

1 X 5‐1/2" 1 X 6" 1 X 6‐1/2" 1 X 7" 1 X 8" 1‐1/8 X 2‐3/4" 1‐1/8 X 3" 1‐1/8 X 3‐1/4" 1‐1/8 X 3‐1/2" 1‐1/8 X 3‐3/4" 1‐1/8 X 4" 1‐1/8 X 4‐1/2" 1‐1/8 X 5" 1‐1/8 X 5‐1/2" 1‐1/8 X 6" 1‐1/8 X 6‐ 6‐1/2" 1/2" 1‐1/8 X 7" 1‐1/8 X 7‐1/2" 1‐1/4 X 3" 1‐1/4 X 3‐1/2" 1‐1/4 X 4" 1‐1/4 X 4‐1/2" 1‐1/4 X 5" 1‐1/4 X 5‐1/2" 1‐1/4 X 6" 1‐1/4 X 6‐1/2" 1‐1/4 X 7" 1‐1/2 X 3" 1‐1/2 X 3‐1/4" 1‐1/2 X 3‐1/2" 1‐1/2 X 3‐3/4" 1‐1/2 X 4" 1‐1/2 X 4‐1/2" 1‐1/2 X 5" 1‐1/2 X 5‐1/2" 1‐1/2 X 6" 1‐1/2 X 6‐1/2" 1‐1/2 X 7" 1‐1/2 X 8"

146.1 157.2 167.0 177.0 199.0 113.5 119.3 126.3 133.3 140.3 147.3 161.3 175.4 189.4 203.4 217.4 231.4 245.5 154.4 171.7 188.9 206.2 223.5 240.8 258.1 275.4 292.7 260.0 270.0 280.0 290.0 300.0 320.0 341.0 370.0 390.0 420.0 440.0 492.0

25 25 20 20 15 35 30 30 30 25 25 20 20 20 15 15 15 15 25 20 20 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10

Section IV

Page 19

cpsales@carpenterandpaterson.com

Construction Fasteners

Screws

Lag "Coach" Screws

Figure 107

Available Finishes Plain, Electro Zinc & Hot Dipped Galvanized

Page 20

Screw Size

WGT 100 PCS

Case Quantity

1/4 X 1" 1/4 X 1‐1/4" 1/4 X 1‐1/2" 1/4 X 1‐3/4" 1/4 X 2" 1/4 X 2‐1/2" 1/4 X 3" 1/4 X 3‐1/2" 1/4 X 4" 1/4 X 4‐1/2" 1/4 X 5" 1/4 X 5‐1/2" 1/4 X 6" 5/16 X 1" 5/16 X 1‐1/4" / / 5/16 X 1‐1/2" 5/16 X 1‐3/4" 5/16 X 2" 5/16 X 2‐1/2" 5/16 X 3" 5/16 X 3‐1/2" 5/16 X 4" 5/16 X 4‐1/2" 5/16 X 5" 5/16 X 5‐1/2" 5/16 X 6" 3/8 X 1" 3/8 X 1‐1/4" 3/8 X 1‐1/2" 3/8 X 1‐3/4" 3/8 X 2" 3/8 X 2‐1/2" 3/8 X 3" 3/8 X 3‐1/2"

1.48 1.67 1.83 2.07 2.58 3.00 4.03 4.03 4.44 4.90 5.46 6.21 6.59 2.93 3.21 3.49 3.21 4.05 4.62 5.38 5.94 6.88 7.76 8.62 9.94 10.30 3.18 3.66 4.19 4.85 5.40 6.51 7.76 8.78

3500 2800 2400 1800 1600 1300 900 750 700 600 600 600 500 2200 1800 1600 1300 1200 900 700 500 450 400 300 300 300 1500 1300 1000 1000 800 650 500 400

Section V

www.carpenterandpaterson.com

Construction Fasteners

Screws

Lag "Coach" Screws Screw Size

WGT 100 PCS

Case Quantity

Screw Size

WGT 100 PCS

Case Quantity

3/8 X 4" 3/8 X 4‐1/2" 3/8 X 5" 3/8 X 5‐1/2" 3/8 X 6" 3/8 X 7" 3/8 X 8" 3/8 X 9" 3/8 X 10" 3/8 X 12" 3/8 X 14" 1/2 X 1‐1/2" 1/2 X 2" 1/2 X 2‐1/2" 1/2 X 3" 1/2 X 3 1/2" 1/2 X 3‐1/2" 1/2 X 4" 1/2 X 4‐1/2" 1/2 X 5" 1/2 X 5‐1/2" 1/2 X 6" 1/2 X 7" 1/2 X 8" 1/2 X 9" 1/2 X 10" 1/2 X 11" 1/2 X 12" 1/2 X 14" 1/2 X 16" 1/2 X 18" 1/2 X 24" 5/8 X 2" 5/8 X 2‐1/2" 5/8 X 3" 5/8 X 3‐1/2"

10.1 11.4 12.5 13.9 15.0 17.0 19.5 31.0 23.8 28.1 32.4 8.43 10.7 13.4 15.1 17 5 17.5 19.5 21.8 24.2 26.6 28.8 32.1 37.0 42.8 48.5 52.9 57.3 67.5 76.5 88.3 132.0 17.9 22.3 26.7 28.1

325 300 300 250 250 250 250 200 200 200 200 550 450 400 300 250 200 175 150 150 150 150 125 120 120 120 120 90 80 70 50 275 240 200 180

5/8 X 4" 5/8 X 4‐1/2" 5/8 X 5" 5/8 X 5‐1/2" 5/8 X 6" 5/8 X 7" 5/8 X 8" 5/8 X 9" 5/8 X 10" 5/8 X 11" 5/8 X 12" 5/8 X 14" 5/8 X 16" 5/8 X 18" 5/8 X 20" 5/8 5/8 X 24" 3/4 X 2‐1/2" 3/4 X 3" 3/4 X 3‐1/2" 3/4 X 4" 3/4 X 4‐1/2" 3/4 X 5" 3/4 X 5‐1/2" 3/4 X 6" 3/4 X 7" 3/4 X 7‐1/2" 3/4 X 8" 3/4 X 9" 3/4 X 10" 3/4 X 11" 3/4 X 12" 3/4 X 14" 3/4 X 16" 3/4 X 18" 3/4 X 20"

31.7 34.5 38.3 42.2 45.3 51.9 59.7 67.5 75.8 83.1 90.3 109.4 123.8 138.2 173.0 207 207.0 0 38.3 40.5 45.3 49.7 54.9 60.8 73.2 81.1 86.3 89.5 92.7 106.7 112.8 131.0 141.0 162.0 183.0 204.0 254.0

160 150 140 130 120 100 90 75 75 60 60 60 50 45 35 30 150 130 120 100 100 90 80 80 70 65 65 60 50 50 40 40 35 30 25

Section V

Page 21

cpsales@carpenterandpaterson.com

Construction Fasteners

Screws

SELF DRILLING SCREWS, HEX HEAD WASHER

Figure SDTS

*Available in different diameters and lengths Available Finishes Electro Zinc

Page 22

Screw Size

WGT 100 PCS

Box Quantity

Case Quantity

#6 X 3/8" #6 X 1/2" #6 X 3/4" #8 X 1/2" #8 X 5/8" #8 X 3/4" #8 X 1" #8 X 1‐1/4" #8 X 1‐1/2" #10 X 1/2" #10 X 5/8" #10 X 3/4" #10 X 1" #10 X 1‐1/4" #10 X 1‐1/2" #10 X 2" #12 X 3/4" #12 X 1" #12 X 1‐1/4" #12 X 1‐1/2" #12 X 2" #14 X 3/4" #14 X 1" #14 X 1‐1/4" #14 X 1‐1/2" #14 X 1‐3/4" #14 X 2" #14 X 3"

0.20 0.26 0.30 0.36 0.40 0.47 0.58 0.68 0.80 0.51 0.59 0.65 0.80 0.92 1.06 1.34 0.89 1.08 1.25 1.44 1.77 1.35 1.65 1.86 2.08 2.37 2.86 2.80

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

2500 2500 2500 2500 2500 2500 2500 2500 2000 2500 2500 2500 2500 2000 2000 900 2500 2000 2000 1200 900 2000 1200 1200 900 600 600 600

Section V

www.carpenterandpaterson.com

Construction Fasteners

Screws

SELF DRILLING SCREWS, HEX HEAD WITH NEOPRENE WASHER

Figure SDTSN

*Available in different diameters and lengths Available Finishes Electro Zinc

Screw Size

WGT 100 PCS

Box Quantity

Case Quantity

#10 X 5/8" #10 X 3/4" #10 X 1" #10 X 1‐1/2" #10 X 2" #12 X 3/4" #12 X 1" #12 X 1‐1/4" #12 X 1‐1/2" #14 X 3/4" #14 X 1" #14 X 1‐1/4" #14 X 1‐1/2"

0.59 0.65 1.07 1.30 1.34 0.89 1.08 1.25 1.44 1.23 1.5 1.69 1.89

100 100 100 100 100 100 100 100 100 100 100 100 100

2000 1200 1200 900 900 1200 1200 900 900 1200 900 900 600

Screw Size

WGT 100 PCS

Box Quantity

#12 X 1‐1/2" #16 X 2"

1.50 1.95

100 100

STEEL DRIVE SCREW

Figure 166

Section V

Page 23

cpsales@carpenterandpaterson.com

Construction Fasteners

Screws

DRYWALL SCREWS, PHILLIPS, COARSE

Figure DWS

Available Finishes Black Phosphate

Screw Size

WGT 100 PCS

Box Quantity

Case Quantity

#6 X 1" #6 X 1‐1/8" #6 X 1‐1/4" #6 X 1‐5/8" #6 X 2" #6 X 2‐1/4" #7 X 2" #8 X 2‐1/2" #8 X 3" #10 X 3‐1/2" #10 X 4"

0.35 0.38 0.40 0.45 0.64 0.63 0.85 0.93 1.09 2.20 2.50

100 100 100 100 100 100 100 100 100 100 100

2500 2400 2500 2400 2400 2400 2400 1800 1200 600 600

Screw Size

WGT 100 PCS

Box Quantity

Case Quantity

#6 X 1" #6 X 1‐1/8" #6 X 1‐1/4" #6 X 1‐5/8" #6 X 2" #6 X 2‐1/4" #8 X 2‐1/2" #8 X 3"

0.35 0.36 0.40 0.54 0.64 0.69 1.04 1.30

100 100 100 100 100 100 100 100

2400 2400 2000 2400 2400 2400 1800 1800

DRYWALL SCREWS, PHILLIPS, FINE

Figure DWSF

Available Finishes Black Phosphate

Page 24

Section V

www.carpenterandpaterson.com

Construction Fasteners

Rods

LAG ROD

Figure 28

*Available in different diameters and lengths Available Finishes Plain, Electro Zinc, & Painted

Section VI

Rod Size 1/4 X 1-1/2" 1/4 X 2" 1/4 X 2-1/2" 1/4 X 3" 1/4 X 3-1/2" 1/4 X 4" 1/4 X 5" 1/4 X 6" 5/16 X 1-1/2" 5/16 X 2" 5/16 X 2-1/2" 5/16 X 3" 5/16 X 3-1/2" 5/16 X 4" 5/16 X 5" 5/16 X 6" 5/16 3/8 X 2" 3/8 X 2-1/2" 3/8 X 3" 3/8 X 3-1/2" 3/8 X 4" 3/8 X 4-1/2" 3/8 X 5" 3/8 X 5-1/2" 3/8 X 6" 3/8 X 8" 3/8 X 10" 3/8 X 12" 3/8 X 14" 1/2 X 6" 1/2 X 7" 1/2 X 8" 1/2 X 10" 1/2 X 12"

WGT 100 PCS 1.4 1.9 2.4 2.9 3.4 3.9 4.9 5.9 2.2 3.1 3.9 4.7 5.4 6.5 7.9 98 9.8 4.5 5.6 7.0 8.2 9.4 10.8 11.8 13.0 14.2 19.0 23.8 28.6 33.6 25.3 29.7 34.8 42.9 52.1

Box Quantity 4500 3000 2000 1750 1250 1000 600 500 3000 2000 1500 1250 1000 800 500 400 1500 1100 900 700 600 500 400 350 250 200 200 200 200 100 100 100 100 100

Page 25

cpsales@carpenterandpaterson.com

Construction Fasteners

Rods

ALL THREAD ROD 6', 10' & 12'

Figure 94

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Rod Size

WGT 100 FT

6' Tube Quantity

1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1‐1/8" 1‐1/4" 1‐3/8" 1‐1/2" 1‐3/4" 2"

12.1 19.6 29.1 39.8 52.2 83.7 122.4 169.2 220.4 280.5 350.0 417.0 505.0 690.0 904.0

300 210 150 102 90 54 36 24 18 12 6 6 6 6 6

Rod Size

WGT 100 FT

6' Tube Quantity

1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1‐1/8" 1‐1/4" 1‐1/2"

12.0 30.0 54.0 85.0 120.0 170.0 230.0 280.0 350.0 500.0

300 150 90 54 36 24 18 12 6 6

B7 THREAD ROD

Figure 94 B7

Available Finishes Plain

Page 26

Section VI

www.carpenterandpaterson.com

Construction Fasteners

Rods

ALL THREAD STUDS

Figure 94S Figure 94S B7

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Pipe Size 1/2" 3/4" 1" 1‐1/4" 1‐1/2" 2" 2‐1/2" 3" 3‐1/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 30" 34" 36" 42"

Standard Stud 150 LB Flange

Standard Stud 300 LB Flange

1/2 X 2‐1/4" 1/2 X 2‐1/4" 1/2 X 2‐1/2" 1/2 X 2‐1/2" 1/2 X 2‐3/4" 5/8 X 3" 5/8 X 3‐1/4" 5/8 X 3‐1/2" 5/8 X 3‐1/2" 5/8 X 3‐1/2" 3/4 X 3‐3/4" 3/4 X 3‐3/4" 3/4 X 4" 7/8 X 4‐1/2" 7/8 X 4‐1/2" 1 X 5" 1 X 5‐1/4" 1‐1/8 X 5‐3/4" 1‐1/8 X 6" 1‐1/4 X 6‐1/2" 1‐1/4 X 6‐3/4" 1‐1/4 X 7" 1‐1/4 X 7‐1/4" 1‐1/2 X 8" 1‐1/2 X 8‐1/4" 1‐1/2 X 8‐1/2"

1/2 X 2‐1/2" 5/8 X 2‐3/4" 5/8 X 3" 5/8 X 3" 3/4 X 3‐1/2" 5/8 X 3‐1/4" 3/4 X 3‐3/4" 3/4 X 4" 3/4 X 4‐1/4" 3/4 X 4‐1/4" 3/4 X 4‐1/2" 3/4 X 4‐3/4" 7/8 X 5‐1/4" 1 X 6" 1‐1/8 X 6‐1/2" 1‐1/8 X 6‐3/4" 1‐1/4 X 7‐1/4" 1‐1/4 X 7‐1/2" 1‐1/4 X 8" 1‐1/2 X 8‐3/4" 1‐1/2 X 9" 1‐5/8 X 10" 1‐3/4 X 11‐3/4" 1‐7/8 X 12‐1/4" 2 X 12‐3/4 2 X 13‐64"

COPPER STUDS

Figure 94S CT Available Finishes Copper Plated

Section VI

Rod Size

WGT 100 PCS

Box Quantity

3/8 X 3"

24.9

50

Page 27

cpsales@carpenterandpaterson.com

Construction Fasteners

Rods

MACHINE THREADED RODS

Figure 133 Rod Size

*Available in different diameters and lengths Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized & Painted

Page 28

3/8 X 8" 3/8 X 10" 3/8 X 12" 3/8 X 14" 3/8 X 18" 3/8 X 24" 3/8 X 30" 3/8 X 36" 3/8 X 42" 3/8 X 48" 3/8 X 54" 3/8 X 60" 3/8 X 66" 3/8 X 72" 1/2 X 8" 1/2 1/2 X 10" 1/2 X 12" 1/2 X 14" 1/2 X 18" 1/2 X 24" 1/2 X 30" 1/2 X 36" 1/2 X 42" 1/2 X 48" 1/2 X 54" 1/2 X 60" 1/2 X 66" 1/2X 72"

THREAD WGT LENGTH 100 PCS

3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"

25 32 38 44 57 76 94 120 140 150 170 190 210 230 44 56 67 78 100 140 170 200 240 250 310 340 370 410

Section VI

www.carpenterandpaterson.com

Construction Fasteners

Rods

MACHINE THREADED RODS Rod Size

5/8 X 8" 5/8 X 10" 5/8 X 12" 5/8 X 14" 5/8 X 18" 5/8 X 24" 5/8 X 30" 5/8 X 36" 5/8 X 42" 5/8 X 48" 5/8 X 54" 5/8 X 60" 5/8 X 66" 5/8 X 72" 3/4 X 8" 3/4 X 10 10" 3/4 X 12" 3/4 X 14" 3/4 X 18" 3/4 X 24" 3/4 X 30" 3/4 X 36" 3/4 X 42" 3/4 X 48" 3/4 X 54" 3/4 X 60" 3/4 X 66" 3/4 X 72"

Section VI

THREAD WGT LENGTH 100 PCS

3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"

69 87 110 130 160 210 160 320 370 420 470 520 580 630 69 87 110 130 160 210 160 320 370 420 470 520 580 630

Rod Size

7/8 X 8" 7/8 X 10" 7/8 X 12" 7/8 X 14" 7/8 X 18" 7/8 X 24" 7/8 X 30" 7/8 X 36" 7/8 X 42" 7/8 X 48" 7/8 X 54" 7/8 X 60" 7/8 X 66" 7/8 X 72" 1 X 8" 1 X 10 10" 1 X 12" 1 X 14" 1 X 18" 1 X 24" 1 X 30" 1 X 36" 1 X 42" 1 X 48" 1 X 54" 1 X 60" 1 X 66" 1 X 72"

THREAD WGT LENGTH 100 PCS

4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4"

69 87 110 130 160 210 160 320 370 420 470 520 580 630 69 87 110 130 160 210 160 320 370 420 470 520 580 630

Page 29

cpsales@carpenterandpaterson.com

Construction Fasteners

Rods

EYE RODS (UNWELDED)

Figure 33

*Available in different diameters and lengths Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized & Painted

Page 30

Rod Size

THREAD LENGTH

WGT 100 PCS

3/8 X 8" 3/8 X 10" 3/8 X 12" 3/8 X 14" 3/8 X 18" 3/8 X 24" 3/8 X 30" 3/8 X 36" 3/8 X 42" 3/8 X 48" 3/8 X 54" 3/8 X 60" 3/8 X 66" 3/8 X 72" 1/2 X 8" 1/2 X 10" 1/2 X 12" 1/2 X 14" 1/2 X 18" 1/2 X 24" 1/2 X 30" 1/2 X 36" 1/2 X 42" 1/2 X 48" 1/2 X 54" 1/2 X 60" 1/2 X 66" 1/2X 72"

2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2"

32 38 45 51 64 82 110 120 140 180 180 200 220 240 60 71 82 94 120 150 190 220 250 190 320 350 390 410

Section VI

www.carpenterandpaterson.com

Construction Fasteners

Rods

EYE RODS (UNWELDED) Rod Size

THREAD LENGTH

WGT 100 PCS

Rod Size

THREAD LENGTH

WGT 100 PCS

5/8 X 8" 5/8 X 10" 5/8 X 12" 5/8 X 14" 5/8 X 18" 5/8 X 24" 5/8 X 30" 5/8 X 36" 5/8 X 42" 5/8 X 48" 5/8 X 54" 5/8 X 60" 5/8 X 66" 5/8 X 72" 3/4 X 8" 3/4 X 10" / 3/4 X 12" 3/4 X 14" 3/4 X 18" 3/4 X 24" 3/4 X 30" 3/4 X 36" 3/4 X 42" 3/4 X 48" 3/4 X 54" 3/4 X 60" 3/4 X 66" 3/4 X 72"

2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"

98 120 140 150 190 240 290 340 400 450 500 550 600 660 150 170 200 220 270 350 420 500 570 560 720 800 870 950

7/8 X 8" 7/8 X 10" 7/8 X 12" 7/8 X 14" 7/8 X 18" 7/8 X 24" 7/8 X 30" 7/8 X 36" 7/8 X 42" 7/8 X 48" 7/8 X 54" 7/8 X 60" 7/8 X 66" 7/8 X 72" 1 X 8" 1 X 10" 1 X 12" 1 X 14" 1 X 18" 1 X 24" 1 X 30" 1 X 36" 1 X 42" 1 X 48" 1 X 54" 1 X 60" 1 X 66" 1 X 72"

3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4"

210 240 280 310 380 480 580 680 790 890 990 1100 1200 1300 300 350 390 440 530 680 820 930 1100 1200 1400 1500 1600 1800

Section VI

Page 31

cpsales@carpenterandpaterson.com

Construction Fasteners

Rods

WELDED EYE RODS

Figure 93

*Available in different diameters and lengths Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized & Painted

Page 32

Rod Size

THREAD LENGTH

WGT 100 PCS

3/8 X 8" 3/8 X 10" 3/8 X 12" 3/8 X 14" 3/8 X 18" 3/8 X 24" 3/8 X 30" 3/8 X 36" 3/8 X 42" 3/8 X 48" 3/8 X 54" 3/8 X 60" 3/8 X 66" 3/8 X 72" 1/2 X 8" 1/2 X 10" 1/2 X 12" 1/2 X 14" 1/2 X 18" 1/2 X 24" 1/2 X 30" 1/2 X 36" 1/2 X 42" 1/2 X 48" 1/2 X 54" 1/2 X 60" 1/2 X 66" 1/2X 72"

2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2"

32 38 45 51 64 82 110 120 140 180 180 200 220 240 60 71 82 94 120 150 190 220 250 190 320 350 390 410

Section VI

www.carpenterandpaterson.com

Construction Fasteners

Rods

WELDED EYE RODS Rod Size

THREAD LENGTH

WGT 100 PCS

Rod Size

THREAD LENGTH

WGT 100 PCS

5/8 X 8" 5/8 X 10" 5/8 X 12" 5/8 X 14" 5/8 X 18" 5/8 X 24" 5/8 X 30" 5/8 X 36" 5/8 X 42" 5/8 X 48" 5/8 X 54" 5/8 X 60" 5/8 X 66" 5/8 X 72" 3/4 X 8" 3/4 X 10" / 3/4 X 12" 3/4 X 14" 3/4 X 18" 3/4 X 24" 3/4 X 30" 3/4 X 36" 3/4 X 42" 3/4 X 48" 3/4 X 54" 3/4 X 60" 3/4 X 66" 3/4 X 72"

2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 2‐1/2" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"

98 120 140 150 190 240 290 340 400 450 500 550 600 660 150 170 200 220 270 350 420 500 570 560 720 800 870 950

7/8 X 8" 7/8 X 10" 7/8 X 12" 7/8 X 14" 7/8 X 18" 7/8 X 24" 7/8 X 30" 7/8 X 36" 7/8 X 42" 7/8 X 48" 7/8 X 54" 7/8 X 60" 7/8 X 66" 7/8 X 72" 1 X 8" 1 X 10" 1 X 12" 1 X 14" 1 X 18" 1 X 24" 1 X 30" 1 X 36" 1 X 42" 1 X 48" 1 X 54" 1 X 60" 1 X 66" 1 X 72"

3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 3‐1/2" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4"

210 240 280 310 380 480 580 680 790 890 990 1100 1200 1300 300 350 390 440 530 680 820 930 1100 1200 1400 1500 1600 1800

Section IV

Page 33

cpsales@carpenterandpaterson.com

Construction Fasteners

U-Bolts

U-BOLTS

Figure 283

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized PVC, Stainless 304 & Stainless 316

Page 34

Pipe Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36"

Rod WGT Diameter 100 PCS 1/4" 11 1/4" 12 1/4" 12 3/8" 28 3/8" 30 3/8" 33 1/2" 70 1/2" 78 1/2" 84 1/2" 90 1/2" 104 5/8" 200 5/8" 230 3/4" 490 7/8" 770 7/8" 830 7/8" 920 1" 1350 1" 1460 1" 1690 1910 1" 2320 1"

Box Quantity 100 100 100 100 100 100 50 50 25 25 25 20 10 5 Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk

Section VII

www.carpenterandpaterson.com

Construction Fasteners

U-Bolts

LIGHT DUTY U-BOLTS

Figure 283LD

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized PVC, Stainless 304 & Stainless 316

Pipe Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 5" 6" 8" 10"

Rod WGT Diameter 100 PCS 1/4" 6 1/4" 7 1/4" 7 1/4" 8 1/4" 9 1/4" 10 3/8" 28 3/8" 31 3/8" 35 3/8" 38 3/8" 45 1/2" 95 1/2" 120 5/8" 230

Box Quantity 100 100 100 100 100 100 50 50 25 25 25 20 10 5

WGT Rod Diameter 100 PCS 1/2" 99 1/2" 115 5/8" 239 5/8" 400 3/4" 479 7/8" 764 7/8" 820 7/8" 870 1350 1" 1" 1460 1" 1710

Box Quantity 50 25 20 10 5 Bulk Bulk Bulk Bulk Bulk Bulk Bulk

U-BOLTS FOR DUCTILE IRON PIPE

Figure 283DI

Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized

Section VII

Pipe Size 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30"

Page 35

cpsales@carpenterandpaterson.com

Construction Fasteners

Wall Anchors

TOGGLE BOLTS WITH WINGS

Figure 59 Bolt Size

WGT 100 PCS

Box Quantity

1/8 X 2" 1/8 X 3" 1/8 X 4" 3/16 X 2" 3/16 X 3" 3/16 X 4" 3/16 X 5" 1/4 X 3" 1/4 X 4" 1/4 X 5" 1/4 X 6" 5/16 X 3" 5/16 X 4" 5/16 X 5" 5/16 X 6" 3/8 X 3/8 X 3" 3" 3/8 X 4" 3/8 X 5" 3/8 X 6" 1/2 X 3" 1/2 X 4" 1/2 X 6"

1.5 1.8 2.0 3.3 4.5 5.0 5.0 6.5 7.0 8.0 9.0 7.0 11.6 13.2 14.8 88 8.8 15.3 20.1 22.5 35.0 42.0 50.0

50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25

Bolt Size

WGT 100 PCS

Case Quantity

1/8" 3/16" 1/4" 5/16" 3/8" 1/2"

0.7 1.9 2.5 4.2 5.5 6.5

3250 1450 800 500 300 100

TOGGLE WINGS

Figure 5

Page 36

Section VII

www.carpenterandpaterson.com

Construction Fasteners

Wall Anchors

STRAP-TOGGLE

Figure STOGGLE Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 4" 1/4 X 4" 3/8 X 4" 1/2 X 4"

3.5 3.5 5.0 5.0

50 50 25 25

300 300 150 150

Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 4" 1/4 X 4" 3/8 X 4" 1/2 X 4"

3.5 3.5 5.0 5.0

100 100 25 25

500 500 250 250

TOGGLER

Figure TOGGLER

WALL DOG "PAN HEAD"

Figure WALLDOGP Available Finishes Chrome & White Head

Screw Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 1‐1/4"

0.35

100

1000

WALL DOG "OVAL HEAD"

Figure WALLDOGO Available Finishes Chrome & White Head

Section VIII

Screw Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 1‐1/4"

0.35

100

1000

Page 37

cpsales@carpenterandpaterson.com

Construction Fasteners

Wall Anchors

E-Z ANCHOR

Figure EZ25

* With #8 x 1‐1/4" Screws

Anchor Type

WGT 100 PCS

Box Quantity

Case Quantity

Zinc E‐Z Plastic E‐Z 25 Zinc Anchors *

1.6 0.1 0.9

100 100 1

1000 1000 10

Anchor Type

WGT 100 PCS

Box Quantity

Case Quantity

Nylon Zip‐It Nylon Zip‐It* Zinc Zip‐It Zinc Zip‐It*

0.5 1.3 2.0 2.5

100 100 100 100

1000 1000 1000 1000

Anchor Type

WGT 100 PCS

Box Quantity

Case Quantity

HSP Zinc HSP Zinc* HFP Nylon HFP Nylon*

0.5 1.3 2.0 2.5

100 100 100 100

1000 1000 1000 1000

ZIP-IT

Figure EZ / EZP

* With #8 x 1" screws

DRYWALL ANCHOR

Figure HSP / HFP

* With #8 x 1‐3/16" screws

Page 38

Section VIII

www.carpenterandpaterson.com

Construction Fasteners

Wall Anchors

POLY-SET ANCHORS

Figure PSA & PSAK

Kit includes screws and drill bit

Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 1‐1/4" 9/32 X 1‐7/16" 3/16 X 1‐1/4" Kit 9/32 X 1‐7/16" Kit

0.9 1.8 1.1 1.2

100 100 1 / 100 1 / 50

1000 1000 10 10

Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

6‐8 X 3/4" 8‐10 X 7/8" 10‐12 X 1" 14‐16 X 1‐1/2" 6‐8 X 3/4" Kit 6 8 X 3/4 Kit 8‐10 X 7/8" Kit 10‐12 X 1" Kit

1.0 1.5 3.0 6.0 1.0 1.5 3.0

100 100 100 100 100 100 100

1000 1000 1000 1000 1000 1000 1000

Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 1" 1/4 X 1‐3/16" 5/16 X 1‐5/8" 3/8 X 2" 3/16 X 1" Kit 1/4 X 1‐3/16" Kit

1.0 1.5 3.0 6.0 1.0 1.5

500 500 400 200 100 100

1000 1000 1000 1000 1000 1000

BANTAM PLUG

Figure PBK

Kit includes screws and drill bit

UNIVERSAL PLASTIC ANCHOR

Figure HUD-1

Kit includes screws and drill bit

Section VIII

Page 39

cpsales@carpenterandpaterson.com

Construction Fasteners

Cast-In Anchors

BANG-IT

Figure BANGIT Anchor Size

1/4" 3/8" 1/2" 5/8" 3/4" 7/8"

Anchor Color

Box Quantity

Pallet Quantity

Brown 100 Green 100 Yellow 100 Red 50 Purple 50 Black 50 3/16" Carbide Hole Saw 1‐3/16" Carbide Hole Saw

4000 4000 4000 2400 2400 2400

CAST-IN ANCHOR

Figure HCI-MD

Page 40

Anchor Size

Box Quantity

1/4" 1/4 3/8" 1/2" 5/8" 3/4"

100 100 60 60 60

Section IX

www.carpenterandpaterson.com

Construction Fasteners

Cast-In Anchors

WOOD-KNOCKER

Figure WK

* Coil Thread

Anchor Size

Anchor Color

Box Quantity

Pallet Quantity

1/4" 3/8" 1/2" 5/8" 3/4" *1/2" *3/4"

Brown Green Yellow Red Purple Yellow Purple

200 200 200 150 150 200 150

9600 9600 9600 6000 6000 9600 6000

Anchor Size

Box Quantity

1/4" 3/8 3/8" 1/2" 5/8" 3/4"

150 150 100 100 100

CAST-IN ANCHOR

Figure HCI-WF

Secton IX

Page 41

cpsales@carpenterandpaterson.com

Construction Fasteners

Cast-In Anchors

ANCHOR BOLT

Figure 177

*Available in different diameters and lengths Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized & Painted

Page 42

Bolt Size

WGT 100 PCS

3/8 X 6" 3/8 X 8" 3/8 X 10" 3/8 X 12" 1/2 X 6" 1/2 X 8" 1/2 X 10" 1/2 X 12" 5/8 X 6" 5/8 X 8" 5/8 X 10" 5/8 X 12" 3/4 X 6" 3/4 X 8" 3/4 X 10" 3/4 X 12" 7/8 X 6" 7/8 X 8" 7/8 X 10" 7/8 X 12" 1 X 6" 1 X 8" 1 X 10" 1 X 12"

28.0 34.0 40.0 46.0 52.0 63.0 74.0 85.0 81.0 99.0 1.2 134.0 119.0 144.0 169.0 194.0 150.0 190.0 220.0 260.0 200.0 240.0 290.0 330.0

Section IX

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

HAMMER SET ANCHORS

Figure HSA Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 7/8" 1/4 X 3/4" 1/4 X 1" 1/4 X 1‐1/4" 1/4 X 1‐1/2" 1/4 X 2"

2.0 2.2 2.4 2.6 2.8 3.5

100 100 100 100 100 100

1000 1000 1000 1000 1000 1000

Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 7/8" 1/4 X 3/4" 1/4 X 1" 1/4 X 1 1/4 X 1‐1/4" 1/4 X 1‐1/2" 1/4 X 2"

2.0 2.2 2.4 2.6 2.8 3.5

100 100 100 100 100 100

1000 1000 1000 1000 1000 1000

Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 7/8" 1/4 X 3/4" 1/4 X 1" 1/4 X 1‐1/4" 1/4 X 1‐1/2" 1/4 X 2"

0.8 1.5 1.8 2.3 2.5 3.0

100 100 100 100 100 100

500 500 500 500 500 500

Anchor Size

WGT 100 PCS

Box Quantity

Case Quantity

3/16 X 1" 3/16 X 1‐1/2" 1/4 X 1" 1/4 X 1‐1/2" 1/4 X 2"

0.5 0.7 0.8 1.0 1.0

100 100 100 100 100

1000 1000 1000 1000 1000

HAMMER-SET ANCHORS

Figure RHS

ZAMAC NAILIN

Figure PZN

NYLON NAILIN

Figure PNN

Section X

Page 43

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

SETTING TOOL

Figure ST

*Used with Standard or Lipped Drop‐Ins

Rod Size 1/4" 3/8" 1/2" 5/8" 3/4"

WGT 100 PCS 12.5 27.5 39.0 45.0 110.0

Rod Size 1/4" 3/8" 1/2"

WGT 100 PCS 27.5 39.0 45.0

Rod Size 1/4" 3/8" 1/2" 5/8"

WGT 100 PCS 20.5 33.5 42.5 50.0

Rod Size 3/8" 1/2"

WGT 100 PCS 35.0 40.0

SETTING TOOL

Figure STS

*Used with Mini Drop‐Ins

SETTING TOOL

Figure HSAT & SHSAT

*Used with Hollow Set Anchors

SETTING TOOL

Figure SIF

*Requires Hammer Drill

Page 44

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

CARBIDE SDS DRILL BITS

Figure SDSBIT Bit Size

WGT 100 PCS

5/32 X 6" 3/16 X 6" 1/4 X 6" 5/16 X 6" 3/8 X 6" 1/2 X 6" 5/8 X 8" 3/4 X 8" 7/8 X 8" 1 X 8"

8.3 8.4 10.3 12.45 16.6 22.8 37.3 41.5 68.4 78.8

S-4 PLUS SDS

Figure S4+SDS Bit Size 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 27/32" 7/8" 1"

Section X

Lengths Aviable

6" 4, 5, 6, 8, 10, 12 & 14" 6, 8, 11, 14 &16" 4, 6, 8, 11, 14, 16 & 20" 6 & 12" 6, 8, 12, 18 & 24" 6 & 12" 6, 10, 12, 18 & 24" 6 & 10" 8, 12 & 18" 8 & 12" 8, 12 & 18" 8" 8, 12 & 16" 8, 10, 12 & 18"

Page 45

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

DROP-IN ANCHOR

Figure 514 Rod Size 1/4" 3/8" 1/2" 5/8" 3/4"

WGT 100 PCS 2.6 6.8 11.6 31.2 50.0

Box Quantity 100 50 50 25 10

Case Quantity 1000 500 400 125 100

Part Number RL-14 RL-38 RL-12 RL-58 RL-34

Rod Size 1/4" 3/8" 1/2" 5/8" 3/4"

WGT 100 PCS 2.6 6.8 11.6 31.2 50.0

Box Quantity 100 50 50 25 25

Case Quantity 1000 500 400 125 100

Part Number 6304 6306 6308 6320 6312

Rod Size 1/4" 3/8" 1/2" 5/8" 3/4"

WGT 100 PCS 2.0 6.0 12.0 32.0 48.0

Box Quantity 100 50 50 25 10

Case Quantity 1000 500 250 125 50

Part Number 336425 336426 336427 336428 336429

Rod Size 1/4" 3/8" 1/2" 5/8" 3/4"

WGT 100 PCS 2.6 6.8 11.6 31.2 50.0

Box Quantity 100 50 50 25 25

Case Quantity 1200 600 300 100 100

Available Finishes Electro Zinc, Stainless 304 & Stainless 316

MULTI-SET II

Figure RDI

STEEL DROPIN

Figure PDI

DROP-IN ANCHOR

Figure HDI

Page 46

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

DROP-IN ANCHOR LIPPED

Figure 514L Rod Size 1/4" 3/8" 1/2" 5/8" 3/4"

WGT 100 PCS 2.6 6.8 11.6 31.2 49.0

Box Quantity 100 50 50 25 10

Case Quantity 1000 500 400 125 100

Part Number RM-14 RM-38 RM-12 RM-58 RM-34

Rod Size 1/4" 3/8" 1/2" 5/8" 3/4"

WGT 100 PCS 2.6 6.8 11.6 31.2 49.0

Box Quantity 100 50 50 25 25

Case Quantity 1000 500 400 125 100

Part Number 6324 6326 6328

Rod Size 1/4" 3/8" 1/2"

WGT 100 PCS 2.0 6.0 12.0

Box Quantity 100 50 50

Case Quantity 1000 500 250

Part Number 283608 283609 283610

Rod Size 1/4" 3/8" 1/2"

WGT 100 PCS 2.6 6.8 11.6

Box Quantity 100 50 50

Case Quantity 1200 600 300

Available Finishes Electro Zinc, Stainless 304 & Stainless 316

MULTI-SET II

Figure RDIL

STEEL DROPIN

Figure PDIL

DROP-IN ANCHOR

Figure HDIL

Section X

Page 47

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

DROP-IN ANCHOR MINI

Figure 514S Rod Size 1/4" 3/8" 1/2"

WGT 100 PCS 2.4 3.5 6.0

Box Quantity 100 50 50

Case Quantity 1000 1000 500

Part Number RX-38 RX-12

Rod Size 3/8" 3/8"

WGT 100 PCS 3.5 6.0

Box Quantity 100 50

Case Quantity 1000 500

Part Number 6335 6322 6337

Rod Size 1/4" 3/8" 1/2"

WGT 100 PCS 2.0 6.0 12.0

Box Quantity 100 100 50

Case Quantity 1000 1000 500

Part Number 283611

Rod Size 3/8"

WGT 100 PCS 6.0

Box Quantity 100

Case Quantity 1200

Available Finishes Electro Zinc

MULTI-SET II

Figure RDIS

STEEL DROPIN

Figure PDIS

DROP-IN ANCHOR

Figure HDIP

Page 48

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

HOLLOW SET ANCHOR

Figure HSA Part Number 9320 9330 9340 9350 9360

Available Finishes Electro Zinc

Rod Size 1/4" 5/16" 3/8" 1/2" 5/8"

WGT 100 PCS 1.8 5.5 5.5 9.5 21.0

Box Quantity 100 100 100 100 100

Case Quantity 1000 500 500 100 100

WGT 100 PCS 3.8 5.5 5.3 15.3 24.0 43.0

Box Quantity 50 50 50 25 25 10

Case Quantity 250 250 250 125 125 100

WGT 100 PCS 4.0 7.5 12.5 18.0 25.5 54.5

Box Quantity 50 50 50 25 25 10

Case Quantity 250 250 250 125 125 100

SINGLE EXPANSION ANCHOR

Figure SEA Part Number 9650 9655 9665 9675 9685 9695

Available Finishes Electro Zinc

Rod Size 1/4" 5/16" 3/8" 1/2" 1/2 5/8" 3/4"

DOUBLE EXPANSION ANCHOR

Figure DES

Available Finishes Electro Zinc

Section X

Part Number 9510 9515 9520 9525 9530 9535

Rod Size 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

Page 49

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

EXPANSION BOLT

Figure EB

Available Finishes Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Page 50

Bolt Size 1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 3-1/4" 3/8 X 2-1/4" 3/8 X 2-3/4" 3/8 X 3" 3/8 X 3-1/2" 3/8 X 3-3/4" 3/8 X 5" 3/8 X 7" 1/2 X 2-3/4" 1/2 X 3-3/4" 1/2 X 4-1/2" 1/2 X 5-1/2" 1/2 X 7" 1/2 X 8-1/2" 5/8 X 3-1/2" 5/8 X 4-1/2" 5/8 X 5" 5/8 X 6" 5/8 X 7" 5/8 X 8-1/2" 5/8 X 10" 3/4 X 4-1/4" 3/4 X 4-3/4" 3/4 X 5-1/2" 3/4 X 6-1/4" 3/4 X 7" 3/4 X 8-1/2" 3/4 X 10" 3/4 X 12" 7/8 X 6" 7/8 X 8" 7/8 X 10" 1 X 6" 1 X 9" 1 X 12" 1-1/4 X 9" 1-1/4 X 12"

WGT 100 PCS 3.0 3.5 4.8 8.8 9.5 10.8 12.0 12.8 15.5 21.0 18.0 23.0 28.0 32.0 44.0 46.0 40.0 54.0 57.0 64.0 72.0 84.0 100.0 70.0 76.0 85.0 95.0 105.0 120.0 135.0 155.0 120.0 160.0 200.0 170.0 240.0 300.0 360.0 480.0

Box Quantity 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 10 10 10 10 10 5 5 5

Case Quantity 500 500 500 250 250 250 250 250 250 200 200 200 200 150 100 100 100 100 100 75 75 75 75 60 60 60 60 60 40 30 30 40 40 30 30 30 15 15 15

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

TRUE BOLT WEDGE ANCHOR

Figure WS

Available Finishes Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Section X

Bolt Size 1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 3-1/4" 3/8 X 2-1/4" 3/8 X 2-3/4" 3/8 X 3" 3/8 X 3-3/4" 3/8 X 5" 3/8 X 7" 1/2 X 3-3/4" 1/2 X 3-3/4" 1/2 X 4-1/4" 1/2 X 4-1/2" 1/2 X 5-1/2" 1/2 X 7" 5/8 X 3-1/2" 5/8 X 4-1/4" 5/8 X 5" 5/8 X 6" 5/8 X 7" 5/8 X 8-1/2" 5/8 X 10" 3/4 X 4-1/4" 3/4 X 4-3/4" 3/4 X 5-1/2" 3/4 X 6-1/4" 3/4 X 7" 3/4 X 8-1/2" 3/4 X 10" 3/4 X 12" 7/8 X 6" 7/8 X 8" 7/8 X 10" 1 X 6" 1 X 9" 1 X 12"

WGT 100 PCS 3.1 3.6 4.7 8.2 9.4 10.0 11.8 14.8 20.8 18.4 22.8 24.8 26.0 30.8 37.2 36.0 41.0 47.0 54.0 62.0 80.0 94.0 68.0 74.0 81.0 91.0 97.0 123.0 140.0 166.0 126.0 162.0 196.0 166.0 232.0 300.0

Box Quantity 100 100 100 50 50 50 50 50 50 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

Case Quantity 1000 1000 800 500 400 400 300 250 250 200 150 150 150 150 150 100 100 100 50 30 30 30 60 60 50 30 30 30 30 30 25 15 15 25 15 15

Page 51

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

POWER-STUD

Figure PS

Available Finishes Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Page 52

Bolt Size 1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 3-1/4" 3/8 X 2-1/4" 3/8 X 2-3/4" 3/8 X 3" 3/8 X 3-1/2" 3/8 X 3-3/4" 3/8 X 5" 3/8 X 7" 1/2 X 2-3/4" 1/2 X 3-3/4" 1/2 X 4-1/2" 1/2 X 5-1/2" 1/2 X 7" 1/2 X 8-1/2" 5/8 X 3-1/2" 5/8 X 4-1/2" 5/8 X 5" 5/8 X 6" 5/8 X 7" 5/8 X 8-1/2" 5/8 X 10" 3/4 X 4-1/4" 3/4 X 4-3/4" 3/4 X 5-1/2" 3/4 X 6-1/4" 3/4 X 7" 3/4 X 8-1/2" 3/4 X 10" 3/4 X 12" 7/8 X 6" 7/8 X 8" 7/8 X 10" 1 X 6" 1 X 9" 1 X 12" 1-1/4 X 9" 1-1/4 X 12"

WGT 100 PCS 3.0 3.5 4.8 8.8 9.5 10.8 12.0 12.8 15.5 21.0 18.0 23.0 28.0 32.0 44.0 46.0 40.0 54.0 57.0 64.0 72.0 84.0 100.0 70.0 76.0 85.0 95.0 105.0 120.0 135.0 155.0 120.0 160.0 200.0 170.0 240.0 300.0 360.0 480.0

Box Quantity 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 10 10 10 10 10 5 5 5

Case Quantity 500 500 500 250 250 250 250 250 250 200 200 200 200 150 100 100 100 100 100 75 75 75 75 60 60 60 60 60 40 30 30 40 40 30 30 30 15 15 15

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

KWIK BOLT 3

Figure KB

Available Finishes Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316

Section X

Bolt Size 1/4 X 1-3/4" 1/4 X 2-1/4" 3/8 X 2-1/4" 3/8 X 3" 3/8 X 3-3/4" 3/8 X 5" 1/2 X 2-3/4" 1/2 X 3-3/4" 1/2 X 4-1/2" 1/2 X 5-1/2" 5/8 X 3-3/4" 5/8 X 4-3/4" 5/8 X 6" 5/8 X 7" 3/4 X 4-3/4" 3/4 X 5 5-1/2" 3/4 X 7" 1 X 6" 1 X 9"

WGT 100 PCS 3.0 3.5 4.8 10.8 9.5 10.8 12.0 23.0 28.0 32.0 18.0 23.0 28.0 32.0 44.0 46.0 40.0 54.0 57.0

Box Quantity 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25

Case Quantity 500 500 500 250 250 250 250 200 200 150 200 200 200 150 100 100 100 100 100

Page 53

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

LOK-BOLT

Figure LB

Available Finishes Electro Zinc & Stainless 304

Page 54

Head Style Bolt Size HN 5/16 X 1-1/2" HN 5/16 X 2-1/2" HN 3/8 X 1-7/8" HN 3/8 X 3" HN 3/8 X 4" HN 1/2 X 2-1/4" HN 1/2 X 3" HN 1/2 X 4" HN 1/2 X 5-1/4" HN 1/2 X 6" HN 5/8 X 2-1/4" HN 5/8 X 3" HN 5/8 X 4-1/4" HN 5/8 X 6" HN 3/4 X 2-1/2" HN 3/4 X 4" HN 3/4 X 5-3/4" HN 3/4 X 7-1/2" AN 1/4 X 5/8" AN 1/4 X 1-3/8" AN 1/4 X 2-1/4" RS 1/4 X 1-1/8" RS 1/4 X 2" RS 1/4 X 2-3/4" RS 1/4 X 3-3/4" RS 5/16 X 2-3/8" RS 5/16 X 3-3/8" RS 3/8 X 2-1/2" RS 3/8 X 3-3/4"

WGT 100 PCS 4.3 5.8 7.0 10.0 16.0 14.0 17.3 22.0 27.0 35.0 25.5 34.0 41.0 49.0 46.0 70.0 90.0 115.0 2.0 2.8 3.3 2.0 2.8 3.8 4.8 4.8 6.5 8.0 10.8

Box Quantity 100 100 50 50 50 25 25 25 25 10 25 25 10 10 10 10 10 10 100 100 100 100 100 100 100 100 100 50 50

Case Quantity 1000 500 500 500 500 250 250 125 125 100 125 125 100 100 100 40 30 30 1000 1000 1000 1000 1000 1000 1000 1000 500 500 250

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

LOK-BOLT

Figure LB

HN AN RS FH RC TH TW EX

Section X

Hex Nut Acorn Nut Round Head Flat Head Rod Coupling Threshold Flat Head Tie‐Wire Extenders

Head Style Bolt Size FH 1/4 X 1-1/8" FH 1/4 X 2" FH 1/4 X 3" FH 1/4 X 4" FH 1/4 X 5-1/4" FH 5/16 X 2-1/2" FH 5/16 X 3-1/2" FH 3/8 X 2-3/4 FH 3/8 X 4" FH 3/8 X 5" FH 3/8 X 6" RC 3/8 X 1-1/2" RC 3/8 X 1-7/8" RC 1/2 X 2-1/4" TH 1/4 X 2" TW 5/16 X 1-1/2" EX 1/4 X 1" EX 5/16 X 1-1/8" EX 3/8X 1" EX 1/2 X 1-3/8"

WGT 100 PCS 2.0 2.8 3.8 4.5 6.5 4.5 6.3 7.5 10.8 14.0 16.0 5.5 9.0 21.0 2.5 5.3 3.0 3.0 3.0 3.0

Box Quantity 100 100 100 100 100 100 100 50 50 50 50 50 50 25 100 100 100 100 50 25

Case Quantity 1000 1000 1000 500 500 1000 500 500 250 250 250 250 250 125 1000 1000 1000 1000 500 125

Page 55

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

DYNABOLT

Figure DB

AN HN FS TH RS TW

Acorn Nut Hex Nut Phillips Flat Head Threshold Flat Head Round Head Tie Wire

Available Finishes Electro Zinc & Stainless 304

Page 56

Head Style Bolt Size AN 1/4 X 5/8" AN 1/4 X 1-3/8" AN 1/4 X 2-1/4" HN 1/4 X 1-3/8" HN 1/4 X 2-1/4" HN 5/16 X 1-1/2" HN 5/16 X 2-1/2" HN 3/8 X 1-7/8" HN 3/8 X 3" HN 1/2 X 2-1/4" HN 1/2 X 3" HN 1/2 X 4" HN 5/8 X 2-1/4" HN 5/8 X 3" HN 5/8 X 4-1/4" HN 5/8 X 6" HN 3/4 X 2-1/2" HN 3/4 X 4" HN 3/4 X 6-1/4" FS 1/4 X 1-1/2" FS 1/4 X 2-1/4" FS 1/4 X 3-1/8" FS 1/4 X 4" FS 3/8 X 2-7/8" FS 3/8 X 4" FS 3/8 X 5" FS 3/8 X 6" TH 1/4 X 2-1/4" RS 1/4 X 2-7/8" RS 3/8 X 2-5/8" TW 5/16 X 1-1/2"

WGT 100 PCS 1.9 2.6 3.7 2.3 3.4 4.0 5.9 7.0 9.8 13.2 16.0 21.2 25.2 28.0 39.0 49.0 47.0 64.0 86.0 1.9 2.7 3.8 4.7 7.6 10.6 11.2 16.0 2.5 3.7 7.8 4.9

Box Quantity 100 100 100 100 100 100 100 50 50 25 25 25 25 25 10 10 10 5 5 100 100 100 100 50 50 50 50 100 100 50 100

Case Quantity 1000 1000 1000 1000 1000 1000 800 500 400 250 200 200 150 150 100 50 50 50 50 1000 1000 1000 1000 500 400 300 300 1000 1000 500 1000

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

SLEEVE ANCHOR

Figure HLC

H HX FPH T AC RS RC

Bolt Head Hex Nut Flat Phillips Head Tie‐Wire Head Acorn Head Round Head Slotted Rod Coupling

Available Finishes Electro Zinc & Stainless 304

Section X

Head Style Bolt Size H 5/16 X 1-5/8" H 5/16 X 2-5/8" H 3/8 X 1-7/8" H 3/8 X 3" H 1/2 X 2-1/4" H 1/2 X 3" H 1/2 X 4" HX 5/16 X 1-5/8" HX 5/16 X 2-5/8" HX 3/8 X 1-7/8" HX 3/8 X 3" HX 1/2 X 2-1/4" HX 1/2 X 3" HX 1/2 X 4" HX 1/2 X 6" HX 5/8 X 2-1/4" HX 5/8 X 4-1/4" HX 5/8 X 6" HX 3/4 X 2-1/2" HX 3/4 X 4-1/4" HX 3/4 X 6-1/4" FPH 1/4 X 1-3/8" FPH 1/4 X 2" FPH 1/4 X 3" FPH 1/4 X 4" FPH 3/8 X 2-7/8" FPH 3/8 X 4" FPH 3/8 X 5" FPH 3/8 X 6" T 1/4 X 1-3/8" AC 1/4 X 1-3/8" AC 1/4 X 2-1/4" RS 1/4 X 1-1/4" RS 1/4 X 2" RS 1/4 X 4" RC 3/8 X 1-7/8" RC 1/2 X 2-1/4" RC 5/8 X 2-1/4"

WGT 100 PCS 1.9 2.6 3.7 2.3 3.4 4.0 5.9 7.0 9.8 13.2 16.0 21.2 25.2 28.0 39.0 49.0 47.0 64.0 86.0 1.9 2.7 3.8 4.7 7.6 10.6 11.2 16.0 2.5 3.7 7.8 4.9 11.2 16.0 2.5 3.7 7.8 4.9 7.8

Box Quantity 100 100 100 100 100 100 100 50 50 25 25 25 25 25 10 10 10 5 5 100 100 100 100 50 50 50 50 100 100 50 100 50 50 100 100 50 100 50

Case Quantity 1000 1000 1000 1000 1000 1000 800 500 400 250 200 200 150 150 100 50 50 50 50 1000 1000 1000 1000 500 400 300 300 1000 1000 500 1000 300 300 1000 1000 500 1000 500

Page 57

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

WEDGE-BOLT

Figure WB

Available Finishes Electro Zinc & Stainless 304

Page 58

Bolt Size 1/4 X 1-1/4" 1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 3" 3/8 X 1-3/4" 3/8 X 2-1/2" 3/8 X 3" 3/8 X 4" 1/2 X 2" 1/2 X 2-1/2" 1/2 X 3" 1/2 X 4" 1/2 X 5" 1/2 X 6" 5/8 X 3" 5/8 X 4" 5/8 X 5" 5/8 X 6" 3/4 X 3" 3/4 X 4" 3/4 X 5" 3/4 X 6" 3/4 X 8"

WGT 100 PCS 2.5 3.3 4.3 5.5 8.0 11.0 12.0 15.0 14.0 15.5 21.0 25.0 28.0 34.0 28.0 30.0 39.0 47.0 48.0 56.0 70.0 86.0 100.0

Box Quantity 100 100 100 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 20 20 20 20 10

Case Quantity 500 500 500 500 250 250 250 250 200 200 150 150 100 75 100 100 75 75 60 60 60 60 40

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

LARGE DIAMETER TAPCON

Figure LDT

Available Finishes Electro Zinc & Stainless 304

Bolt Size 3/8 X 1-3/4" 3/8 X 2-1/2" 3/8 X 3" 3/8 X 4" 3/8 X 5" 1/2 X 3" 1/2 X 4" 1/2 X 5" 1/2 X 6" 5/8 X 3" 5/8 X 4" 5/8 X 5" 5/8 X 6" 3/4 X 4-1/2" 3/4 X 5-1/2" 3/4 X 6-1/4"

WGT 100 PCS 6.0 9.0 10.0 13.0 18.8 18.0 24.0 30.4 45.0 35.0 40.0 47.0 54.0 71.0 81.0 91.0

Box Quantity 100 100 100 100 50 50 50 50 50 50 50 50 25 25 25 25

Case Quantity 500 500 500 500 250 250 250 250 200 200 150 150 100 75 100 100

Bolt Size 3/8 X 2-1/8" 3/8 X 2-5/8" 3/8 X 3" 3/8 X 4" 3/8 X 5" 3/8 X 6" 1/2 X 2-1/2" 1/2 X 3" 1/2 X 4" 1/2 X 5" 1/2 X 6" 5/8 X 3" 5/8 X 4" 5/8 X 5" 5/8 X 6"

WGT 100 PCS 9.0 9.5 10.1 13.1 19.0 19.9 18.0 18.3 24.4 31.0 46.0 36.0 40.5 47.8 55.5

Box Quantity 50 50 50 50 50 50 50 50 50 50 50 20 20 20 20

Case Quantity 600 600 400 300 300 300 300 300 150 150 150 160 80 80 60

SCREW ANCHOR

Figure HUS-H

Available Finishes Electro Zinc

Section X

Page 59

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

TAPCON ANCHORS

Figure TAPCON

Available Styles

Hex Head & Flat Head Available Finishes Climaseal & Stainless 304

Screw Size 3/16 X 1-1/4" 3/16 X 1-3/4" 3/16 X 2-1/4" 3/16 X 2-3/4" 3/16 X 3-1/4" 3/16 X 3-3/4" 3/16 X 4" 3/16 X 5" 3/16 X 6" 1/4 X 1-1/4" 1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 2-3/4" 1/4 X 3-1/4" 1/4 X 3-3/4" 1/4 X 4" 1/4 X 5" 1/4 X 6"

WGT 100 PCS 0.8 1.0 1.2 1.5 1.7 2.0 2.1 3.3 4.5 1.2 1.5 2.0 2.3 2.8 3.1 3.3 4.3 5.2

Box Quantity 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Case Quantity 500 500 500 500 500 500 500 500 400 500 500 500 500 500 500 500 500 400

TAPCON STARTER KIT

Figure TSK Kit Includes 1/4 X 1-1/4" 1/4 X 1-3/4" Condrive 1000

Quantity 100 100 1

Kit Includes Drill Adapter Sleeve 3/16" Socket 1/4" Socket Phillips Socket #2 Phillips Bit #3 Phillips Bit 1/8" Hex Key

Quantity 1 1 1 1 1 1 1 1

CONDRIVE 1000

Figure C1000

Page 60

Section X

www.carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

TAPPER CONCRETE SCREW

Figure TAPPER

Available Styles

Hex Head & Flat Head Available Finishes Blue Perma-Seal, White Perma-Seal,

Coated Silver, Zinc, Stainless 304, Stainless 410 & Bronze

Screw Size 3/16 X 1-1/4" 3/16 X 1-3/4" 3/16 X 2-1/4" 3/16 X 2-3/4" 3/16 X 3-1/4" 3/16 X 3-3/4" 3/16 X 4" 1/4 X 1-1/4" 1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 2-3/4" 1/4 X 3-1/4" 1/4 X 3-3/4" 1/4 X 4" 3/8 X 2" 3/8 X 3" 3/8 X 4" 3/8 X 5"

3/8 X 6"

WGT 100 PCS 0.8 1.0 1.2 1.5 1.7 2.0 2.1 1.2 1.5 2.0 2.3 2.8 3.1 3.3 5.3 8.3 11.5 13.0 15.5

Box Quantity 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Case Quantity 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 100 100

TAPPER 1000

Figure T1000 Kit Includes Drill Adapter Sleeve 3/16" Socket 1/4" Socket Phillips Socket #2 Phillips Bit #3 Phillips Bit 1/8" Hex Key

Section X

Quantity 1 1 1 1 1 1 1 1

Page 61

cpsales@carpenterandpaterson.com

Construction Fasteners

Concrete Anchors

KWIK-CON II+

Figure KWIKCON

Available Styles

Torx Hex Head, Torx Flat Head & Phillips Head Available Finishes

Zinc Plated & Stainless

Screw Size 3/16 X 1-1/4" 3/16 X 1-3/4" 3/16 X 2-1/4" 3/16 X 2-3/4" 3/16 X 3-1/4" 3/16 X 3-3/4" 3/16 X 4" 1/4 X 1-1/4" 1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 2-3/4" 1/4 X 3-1/4" 1/4 X 3-3/4" 1/4 X 4" 3/8 X 2" 3/8 X 3" 3/8 X 4"

WGT 100 PCS 0.8 1.0 1.2 1.5 1.7 2.0 2.1 1.2 1.5 2.0 2.3 2.8 3.1 3.3 5.3 8.3 11.5

Box Quantity 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Case Quantity 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

Kit Includes Inset Bit #3 PHL Inset Bit Torx #27 Insets Bit Torx #25 Hex Drvier 5/16" Hex Drvier 5/16" Hex Setter Insert Bit Holder 1/8" Hex Key

Quantity 1 1 1 1 1 1 1 1

KWIK-CON DELUXE KIT

Figure KWIKCONKIT

Page 62

Section X

www.carpenterandpaterson.com

Construction Fasteners

Cracked Concrete

TRUBOLT+

Figure CWS Bolt Size 1/2 X 4-1/2" 1/2 X 4-1/2" 1/2 X 5-1/2" 5/8 X 5" 5/8 X 6" 5/8 X 7" 5/8 X 8-1/2"

WGT 100 PCS 26.8 28.0 32.0 47.0 54.0 62.0 80.0

Box Quantity 25 25 25 10 10 10 10

Case Quantity 150 150 150 100 50 30 30

Part Number 6401SD

Rod Size 3/8"

Box Quantity 50

Case Quantity 500

Rod Size 1/4" 3/8" 1/2"

WGT 100 PCS

Box Quantity 100 100 50

Case Quantity 500 500 250

SNAKE+

Figure PSA+

VERTIGO+

Figure PCV+

Section XI

Page 63

cpsales@carpenterandpaterson.com

Construction Fasteners

Cracked Concrete

POWER-STUD+SD1

Figure PS+

* Less than the minimun embedment for strenght design.

Page 64

Bolt Size *1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 3-1/4" *3/8 X 2-1/4" *3/8 X 2-3/4" 3/8 X 3" 3/8 X 3-1/2" 3/8 X 3-3/4" 3/8 X 5" 3/8 X 7" *1/2 X 2-3/4" 1/2 X 3-3/4" 1/2 X 4-1/2" 1/2 X 5-1/2" 1/2 X 7" 1/2 X 8-1/2" *5/8 X 3-1/2" *5/8 X 4-1/2" 5/8 X 4-3/4" 5/8 X 5" 5/8 X 6" 5/8 X 7" 5/8 X 8-1/2"

WGT 100 PCS 6.0 9.0 10.0 13.0 18.8 18.0 24.0 30.4 45.0 35.0 40.0 47.0 54.0 71.0 81.0 91.0 45.0 35.0 40.0 47.0 54.0 71.0 81.0

Box Quantity 100 100 100 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25

Case Quantity 600 600 600 300 300 300 300 300 300 200 200 200 200 150 100 100 100 100 100 100 75 75 50

Section XI

www.carpenterandpaterson.com

Construction Fasteners

Cracked Concrete

POWER-STUD+SD2

Figure PS+2 Bolt Size 3/8 X 3" 3/8 X 3-1/2" 3/8 X 3-3/4" 3/8 X 5" 1/2 X 2-3/4" 1/2 X 4-1/2" 1/2 X 5-1/2" 1/2 X 7" 1/2 X 8-1/2" 5/8 X 4-3/4" 5/8 X 5" 5/8 X 6" 5/8 X 7" 5/8 X 8-1/2" 3/4 X 5-1/2" 3/4 X 6-1/4" 3/4 X 7" 3/4 X 8-1/2"

Section XI

WGT 100 PCS 6.0 9.0 10.0 13.0 18.8 18.0 24.0 30.4 45.0 35.0 40.0 47.0 54.0 71.0 81.0 91.0 45.0 35.0

Box Quantity 100 100 100 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25

Case Quantity 600 600 600 300 300 300 300 300 300 200 200 200 200 150 100 100 100 100

Page 65

cpsales@carpenterandpaterson.com

Construction Fasteners

Cracked Concrete

WEDGE-BOLT+

Figure WB+

* Less than the minimun embedment for strenght design.

Page 66

Bolt Size *1/4 X 1-1/4" *1/4 X 1-3/4" 1/4 X 2-1/4" 1/4 X 3" *3/8 X 1-3/4" 3/8 X 2-1/2" 3/8 X 3" 3/8 X 4" 3/8 X 5" 3/8 X 6" *1/2 X 2" *1/2 X 2-1/2" 1/2 X 3" 1/2 X 4" 1/2 X 5" 1/2 X 6" 1/2 X 6-1/2" 1/2 X 8" *5/8 X 3" 5/8 X 4" 5/8 X 5" 5/8 X 6" 5/8 X 8" *3/4 X 3" *3/4 X 4" 3/4 X 5" 3/4 X 6" 3/4 X 8" 3/4 X 10"

WGT 100 PCS 6.0 9.0 10.0 13.0 18.8 18.0 24.0 30.4 45.0 35.0 40.0 47.0 54.0 71.0 81.0 91.0 45.0 35.0 40.0 47.0 54.0 71.0 81.0 91.0 40.0 47.0 54.0 71.0 81.0

Box Quantity 100 100 100 100 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 20 20 20 20 10 10

Case Quantity 600 600 600 500 300 300 250 250 250 150 200 200 150 150 100 75 75 75 100 100 75 75 75 60 60 60 60 40 30

Section XI

www.carpenterandpaterson.com

Construction Fasteners

Cracked Concrete

PE1000+

Figure PE1000+ Tube Size PE1000+ 13oz.

Box Quantity -

Case Quantity 12

Tube Size Injection System 10 oz. Quik-Shot 8 oz. SBS 12 oz. SBS 29 oz. SBS

Box Quantity 12 12 -

Case Quantity 36 36 12 12 8

Tube Size PE1000+ 13oz.

Box Quantity -

Case Quantity 6

AC100+Gold

Figure AC100+

EPCON G5

Figure G5

Section XI

Page 67

cpsales@carpenterandpaterson.com

Construction Fasteners

Adhesive

POWER-FAST+

Figure PF+ Tube Size PF+ 15oz PF+ 22oz

Box Quantity -

Case Quantity 12

‐

12

Tube Size 7oz 10oz

Box Quantity 12

Case Quantity 36

12

36

Tube Size A7 28oz A7 10oz A7 8oz A7 5 oz

Box Quantity -

Case Quantity 6 6 6 12

Tube Size C6 18oz

Box Quantity -

Case Quantity 6

POWERSTICK

Figure PSTICK Available Colors

White & Grey

EPCON A7

Figure A7

EPCON C6

Figure C6

Page 68

Section XII

www.carpenterandpaterson.com

Construction Fasteners

Adhesive

HIT-HY 50

Figure HITHY50 Tube Size 330ml 1100ml

Box Quantity -

Case Quantity 25

‐

4

Tube Size 330ml 1100ml

Box Quantity -

Case Quantity 25

‐

4

Tube Size 297ml

Box Quantity -

Case Quantity 24

HIT-HY 20

Figure HITHY20

HIT-ICE

Figure HITICE

Section XII

Page 69

cpsales@carpenterandpaterson.com

Construction Fasteners

Rod Hanger

WOOD VERTICAL HANGER

Figure WVH Rod Size X Length 1/4 X 2" 3/8 1" 3/8 X 2" 3/8 X 2-1/2" 3/8 X 3" 3/8 X 4" 1/2 X 2-1/2"

WGT 100 PCS 6.5 4.8 6.0 9.1 9.2 9.5 10.0

Box Quantity 100 100 100 100 100 100 100

Rod Size X Length 1/4 X 2" 3/8 X 1 1" 3/8 X 2" 3/8 X 2-1/2"

WGT 100 PCS 8.0 6.0 7.0 10.3

Box Quantity 100 100 100 100

WGT 100 PCS 6.8 6.3 7.0

Box Quantity 100 100 50

WOOD SIDE HANGER

Figure WSH

CONCRETE VERTICAL HANGER

Figure CVH Rod Size X Length 1/4 X 1-1/2" 3/8 X 1-1/2" 1/2 X 2-3/4"

ROD HANGER NUT DRIVER

Figure ND Part Number ND1 ND2 ND3 ND4

Page 70

Product Type STEEL & WOOD 1/4" CONCETE 3/8" CONCRETE 1/2" CONCRETE

WGT 100 PCS 10.5 4.0 11.0 18.0

Section XIII

www.carpenterandpaterson.com

Construction Fasteners

Rod Hanger

STEEL VERTICAL HANGER

Figure SVH & SVHN

* With Hex Nuts

Rod Size X Length 1/4 X 1" *3/8 X 1" 3/8 X 1-1/2" *3/8 X 1-1/2" 3/8 X 2"

WGT 100 PCS 5.3 5.3 5.5 5.8 5.3

Box Quantity 100 100 100 100 100

Rod Size X Length 1/4 X 1-1/2" 3/8 X 1-1/2" 1/2 X 1-1/2"

WGT 100 PCS 5.5 5.5 6.0

Box Quantity 100 100 100

Rod Size X Length 1/4 X 1" *3/8 X 1" *3/8 X 1-1/2" *3/8 X 2"

WGT 100 PCS 6 7.3 7.0 5.3

Box Quantity 100 100 50 100

Rod Size X Length 1/4 X 1-1/2" 3/8 X 1-1/2"

WGT 100 PCS 5.5 6.0

Box Quantity 100 100

TEK VERTICAL HANGER

Figure TVHN

STEEL SIDE HANGER

Figure SSH & SSHN

* With Hex Nuts

TEK SIDE HANGER

Figure TSHN

Section XIII

Page 71

cpsales@carpenterandpaterson.com

Construction Fasteners

Rod Hanger

SAMMYS FOR WOOD

Figure GST Part Number GST100 GST200 GST300 GST.75 GST10 GST20 GST20SS GST25-380 GST30 GST30SS GST40 GST60 GST2 GST2.5-380 GST3 GST4 GST6 SHGST20 SHGST30

SS ‐ Stainless Steel SH ‐ Swivel Head

Rod Size 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 3/8" 3/8"

Screw Size 1/4 X 1" 1/4 X 2" 1/4 X 3" 1/4 X 3/4" 1/4 X 1" 1/4X 2" 1/4 X 2" 3/8 X 2-1/2" 1/4 X 3" 1/4 X 3" 1/4 X 4" 1/4 X 6" 1/4 X 2" 3/8 X 2-1/2" 1/4 X 3" 1/4 X 4" 1/4 X 6" 1/4 X 2" 1/4 X 3"

WGT 100 PCS 5.0 6.5 7.0 4.8 4.8 6.0 6.0 9.3 7.0 7.0 7.2 8.0 6.0 10.0 7.0 7.2 8.0 6.0 7.0

Rod Size 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8"

Screw Size 1/4 X 1" 1/4 X 2" 1/4 X 1" 1/4 X 2" 1/4 X 2" 3/8 X 2-1/2" 1/4 X 3"

WGT 100 PCS 7.5 8.0 6.0 7.0 7.0 10.3 8.5

SIDEWINDERS FOR WOOD

Figure SWG Part Number SWG100 SWG200 SWG10 SWG20 SWG20SS SWG25-380 SWG30

Page 72

Section XIII

www.carpenterandpaterson.com

Construction Fasteners

Rod Hanger

SAMMYS FOR STEEL

Figure DST Part Number DSTR100 DSTR10 DST150 DST200 TEK500 DSTR1 DSTR1-1/2 DSRT516 DST10 DST10SS DST15 DST15SS DST20 DST25 DST30 DST516 TEK50 DST2.0 DSTR1.0 DSTR5.16 DST5.16 TEK5.0 SHDSTR1

SS ‐ Stainless Steel SH ‐ Swivel Head

Rod Size 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 3/8"

Screw Size 1/4 X 1" 1/4 X 1" 1/4 X 1-1/2" 1/4 X 2" 12-24 X 1-1/2" 1/4 X 1" 12-24 X 1-1/2" 5/16 X 1-1/4" 1/4 X 1" 1/4 X 1" 1/4 X 1-1/2" 1/4 X 1-1/2" 1/4 X 2" 1/4 X 2-1/2" 1/4 X 3" 5/16 X 1-1/4" 12-24 X 1-1/2" 1/4 X 2" 1/4 X 1" 5/16 X 1-1/4" 5/16 X 1-1/4" 12-24 X 1-1/2" 1/4 X 1"

WGT 100 PCS 5.2 5.2 6.8 6.0 5.5 5.8 6.2 7.2 4.8 5.2 5.3 5.3 5.5 6.3 6.6 7.2 5.5 6.0 7.0 7.2 7.2 6.0 5.2

Rod Size 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"

Screw Size 1/4 X 1" 1/4 X 1" 1/4 X 1" 1/4 X 1" 1/4 X 1-1/2" 1/4 X 1-1/2" 1/4 X 2" 5/16 X 1-1/4" 1/4 X 1" 12-24 X 1-1/2" 5/16 X 1-1/4" 12-24 X 1-1/2"

WGT 100 PCS 6.0 6.0 6.0 6.0 6.3 6.3 6.5 7.5 7.0 7.3 7.2 7.3

SIDEWINDERS FOR STEEL

Figure SWD

SS ‐ Stainless Steel Section XIII

Part Number SWD100 SWDR100 SWD10 SWD10SS SWD15 SWD15SS SWD20 SWD516 SWDR1 SWDR1-1/2 SWDR516 SWT15

Page 73

cpsales@carpenterandpaterson.com

Construction Fasteners

Rod Hanger

SAMMYS X-PRESS

Figure XP Part Number XP200 XP20 XP35 SXP20 SXP35 SWXP35

S ‐ Swivel Head SW ‐ Sidewinder

Rod Size 1/4" 3/8" 3/8" 3/8" 3/8" 3/8"

Screw Size 1/4" X 1" 1/4" X 1" 1/4" X 1" 1/4" X 1" 1/4" X 1" 1/4" X 1"

WGT 100 PCS 5.5 5.7 5.7 5.7 5.7 5.7

Rod Size 1/4" 3/8" 3/8 3/8" 1/2" 1/4" 3/8"

Screw Size 5/16 X 1-3/4" 5/16 X 1-3/4" 5/16 X 1 1-3/4" 3/4 5/16 X 1-3/4" 5/16 X 1-3/4" 5/16 X 1-3/4"

WGT 100 PCS 6.8 6.3 6.3 3.5 7.5 7.5

Rod Size 1/4" 3/8"

Screw Size 1/4 X 3" 1/4 X 3"

WGT 100 PCS 10.1 10.1

Part Number #14 #14SW #14SH UXPIT

Product Type SAMMYS SIDWINDERS SWIVEL HEAD X-PRESS

Color

SAMMYS FOR CONCRETE

Figure CST Part Number CST200 CST20 CST20SS CST2 SWC200 SWC20

SW ‐ Sidewinder

SAMMYS TOGGLE FOR DRYWALL

Figure SST Part Number SST300 SST30

SAMMYS TOOLS

Figure #14

Page 74

Black Red Orange Zinc

Section XIII

www.carpenterandpaterson.com

Construction Fasteners

Rod Hanger

VERTIGO STEEL VERTICAL

Figure PSV Part Number 7155 7157 7158 7159 7160 7152 7154 7161

Rod Size 1/4" 3/8" 3/8" 3/8" 3/8" 1/4" 3/8" 1/2"

Screw Size 1/4 X 1" 1/4 X 2" 1/4 X 1" 1/4 X 1-1/2" 1/4 X 1-1/2" 12-24 X 1-1/2" 12-24 X 1-1/2" 12-24 X 1-1/2"

WGT 100 PCS 5.3 5.3 5.5 5.8 5.3 5.5 5.5 6.0

Rod Size 1/4" 3/8" 3/8" 3/8" 3/8" 3/8"

Screw Size 1/4 X 2" 2 1/4 X 1" 1/4 X 2" 1/4 X 3" 1/4 X 4" 3/8 X 2-1/2"

WGT 100 PCS 6.5 6.

5 4.8 6.0 9.1 9.2 10.0

Screw Size 1/4 X 1-1/4" 1/4 X 1-1/2" 3/8 X 2-3/4"

WGT 100 PCS 6.8 6.3 7.0

VERTIGO WOOD VERTICAL

Figure PWV Part Number 7163 7203 7165 7167 7169 7162

VERTIGO CONCRETE VERTICAL

Figure PCV Part Number 7171 7173 7175

Section XIII

Rod Size 1/4" 3/8" 1/2"

Page 75

cpsales@carpenterandpaterson.com

Construction Fasteners

Rod Hanger

VERTIGO STEEL SIDE

Figure PSS Part Number 7183 7184 7186 7188 7200 7201

Rod Size 1/4" 3/8" 3/8" 3/8" 1/4" 3/8"

Screw Size 1/4 X 1" 1/4 X 1" 1/4 X 1-1/2" 1/4 X 2" 12-24 X 1-1/2" 12-24 X 1-1/2"

WGT 100 PCS 6.0 7.3 7.0 5.3 5.5 6.0

Rod Size 1/4" 3/8" 3/8" 3/8 3/8"

Screw Size 1/4 X 1" 1/4 X 1" 1/4 X 2 2" 3/8 X 2-1/2"

WGT 100 PCS 8.1 6.2 7.0 10.3

Part Number 7187 7195 7197 7198

Product Type STEEL & WOOD 1/4" CONCETE 3/8" CONCRETE 1/2" CONCRETE

WGT 100 PCS 10.5 4.0 11.0 18.0

VERTIGO WOOD SIDE

Figure PWS Part Number 7185 7205 7170 7156

VERTIGO SOCKET

Figure PSOCKET

Page 76

Section XIII

www.carpenterandpaterson.com

Construction Fasteners

Saw Blades

RECIPROCATING BLADES

Figure BLADE Part Number M6 M8 M9 M12 W6 W8 W9 W12

*Other Sizes Available

TPI 18 18 14 10/14 6 10 6 6

WGT 100 PCS 5.4 7.2 8.1 10.8 5.4 7.2 8.1 10.8

BANDSAW BLADES

Figure BLADEBAND Blade Size 3'8-7/8 3 8 7/8 X 1/2 1/2"

TPI 18

WGT 100 PCS 12.0

HOLE SAWS

Figure HOLESAW TPI

*Other Sizes Available

Section XIV

1" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"

WGT 100 PCS 25.1 29.2 37.9 51.6 75.8 86.5 120.0 150.0

Page 77

cpsales@carpenterandpaterson.com

Construction Fasteners

NOTES

Â

CARPENTER & PATERSON, INC. DESIGNERS • ENGINEERS • MANUFACTURERS WWW.CARPENTERANDPATERSON.COM

SPECIALS, SPECIALS AND MORE SPECIALS Our manufacturing facilities are equipped with a number of different machines for manufacturing special fasteners and rods. In addition, we have a substantial network of fastener suppliers, both domestic and international, which allows us to service all of your construction fastener needs.

If you don't see what you are looking for in our abbreviated Construction Fastener Catalog, please call your nearest Carpenter & Paterson sales office for assistance.

Smaller fasteners are boxed for easier handling.

Large special alloy U-bolts are manufactured in our Donora, PA facilities.

Forged clevises are attached to threaded rods with lock nuts and tagged.

Assembling and tagging is an addedvalue service to simplify field erection.

We can thread up to 6" diameter and can provide a variety of coatings for corrosion protection.

Call your local sales office for additional fastener prices and availability

CONTACT YOUR NEAREST CARPENTER & PATERSON LOCATION AT: SALES OFFICES AND WAREHOUSES:

MASSACHUSETTS

NEW JERSEY (North)

225 Merrimac Street Woburn, MA 01801 Telephone: (781) 935‐2950 Fax: (781) 935‐7664

369 Jefferson Avenue Saddle Brook, NJ 07663 Telephone: (973) 772‐1800 Fax: (973) 772‐1800

MARYLAND

NEW JERSEY (South)

8941 D'Arcy Road Upper Marlboro, MD 20774 Telephone: (301) 333‐4631 Fax: (301) 333‐4638

3900 River Road Pennsauken, NJ 08110 Telephone: (856) 488‐1988 Fax: (856) 488‐0824

PENNSYLVANIA 484 Galiffa Drive Donora, PA 15033 Telephone: (724) 379‐8461 Fax: (724) 379‐8463

MANUFACTURING PLANTS:

NEW JERSEY 369 Jefferson Avenue Saddle Brook, NJ 07663 T l h Telephone: (973) 772‐1800 (973) 772 1800 Fax: (973) 772‐8333

PENNSYLVANIA 484 Galiffa Drive Donora, PA 15033 Telephone: (724) 379‐8461 Fax: (724) 379‐8463

EXECUTIVE OFFICES

CARPENTER & PATERSON, INC. 225 Merrimac Street, Woburn, MA 01801 Tel: (781) 935‐2950 • Fax: (781) 935‐7664 e‐mail: cpsales@carpenterandpaterson.com www.carpenterandpaterson.com

CARPENTER & PATERSON, INC. DESIGNERS • ENGINEERS • MANUFACTURERS