BULK
HANDLING
T O D A Y
ENDORSER OF “BULK HANDLING TODAY”
LIFTING EQUIPMENT ENGINEERING ASSOCIATION OF SA
• A recognised ECSA Voluntary Association (VA) •
LEEASA is a fully-fledged association devoted to the lifting industry across Southern Africa. Members hale from the crane, forklift, mobile elevated work platform, aerial and suspended access platform, chain hoists, rigging and lifting tackle arenas, etc. Primarily devoted to the LMI’s (Lifting Machinery Inspectors), and LME’s (Lifting Machinery Entities), the association considers safety paramount. As such it serves in an advisory capacity to the SABS, the Department of Labour, various training bodies and the industry at large. LEEASA is recognised by ECSA as a voluntary association. What’s in it for you:
As an Individual member who is registered as a Lifting Machinery Inspector (LMI), you may qualify for any concessionary fee granted by ECSA (this could save you over R1 000 a year).
and other training courses accredited by the association attract ECSA CPD points.
ECSA registered LEEASA members are awarded one Continuing Professional Development (CPD) credit each year. CPD is an ECSA requirement to retain registration.
Members benefit from the collective power of a recognised and established association and collective co-ordination in dealing with authorities in policy making and matters concerning the industry.
Members obtain a discount on LEEASA seminars. Both these
LEEASA has some 650 members (Individuals and Companies).
• • •
LEEASA Occupational Health & Safety Act and Regulations LEEASA Mine Health & Safety Act and Regulations LEEASA Lifting Equipment Inspection & Legal Compliance Register
Available for purchase online at www.leeasa.co.za
1
LIFTING EQUIPMENT ENGINEERING ASSOCIATION OF SOUTH AFRICA Head Office: 8 Boris Road, Bordeaux, Randburg, Johannesburg Tel: 074 900 8378 • www.leeasa.co.za Secretary: Arni Sommer • email: arni@leeasa.co.za
BULK HANDLING TODAY
February 2012
BULK
HANDLING Endorsed by: CMA l LEEASA l SAIMechE l SAIMH
T O D A Y
August 2017
MONITORING COMPLETE CRANE SYSTEMS NEW VERTICAL LIFT CONVEYOR
BULK
HANDLING
Copyright
All rights reserved. No editorial matter published in “Bulk Handling Today” may be reproduced in any form or language without written permission of the publishers. While every effort is made to ensure accurate reproduction, the editor, authors, publishers and their employees or agents shall not be responsible or in any way liable for any errors, omissions or inaccuracies in the publication, whether arising from negligence or otherwise or for any consequences arising therefrom. The inclusion or exclusion of any product does not mean that the publisher or editorial board advocates or rejects its use either generally or in any particular field or fields.
Our e-mail address is bulkhandling@promech.co.za Visit our website on www.promech.co.za
T O D A Y
The monthly circulation is 3 673
Proprietor and Publisher: PROMECH PUBLISHING Tel: (011) 781-1401, Fax: (011) 781-1403 E-mail: bulkhandling@promech.co.za www.promech.co.za Managing Editor: Susan Custers Advertising Sales: Linda Patricio DTP: Anne Rotteglia Subscriptions: Please email us at accounts@promech.co.za if you wish to subscribe to “Bulk Handling Today” at R550,00 (excl postage and VAT) per year; R1 380,00 per year for Africa/Overseas. Printed by: Typo Colour Printing, Tel: (011) 402-3468 FSC (Forestry Stewardship Accreditation)
BULK HANDLING TODAY
August 2017
3
The South African Institute of Materials Handling
Sample
The South African Institute of Materials Handling (SAIMH) is a Non-Profit organisation set up with an objective to encourage the transfer of knowledge associated within the fields of Bulk Materials Handling (conveyors, stacker, reclaimers, tipplers, train loading systems, etc.) through a combination of seminars and networking sessions. The SAIMH is made up of professional engineers, each practising their trade in a variety of organisations who volunteer their time to execute the SAIMH’s objective. The main aim is thus to promote the advancement of the art, science, theory and practice of the Bulk Materials Handling principles and techniques.
Company Affliates as at May 2017 Afripp Projects cc Brelko Conveyor Products (Pty) Ltd Bulkcon CPM Engineering CT Systems cc Conveyor Watch (Pty) Ltd David Brown Gear lndustries (Pty) Ltd ELB Engineering Services (Pty) Ltd Engicon Systems (Pty) Ltd Facet Engineering cc Flexco (SA) (Pty) Ltd
Hagglunds Drives SA (Pty) Ltd Hansen Transmissions SA (Pty) Ltd Hatch Goba (Pty) Ltd lllustech J & A Engineering Services Kimrae Engineering Prolects Loadtech Load Cells (Pty) Ltd MacsteelVRN Martin Engineering Melco Conveyor Equipment Morris Material Handling SA (Pty) Ltd
Osborn Engineered Products (Pty)Ltd PD Engineering Services cc PH Projects Holdings (Pty) Ltd Rio Carb (Pty) Ltd Sandvik Materials Handling Africa Screw Conveyors & Material Handling Senet SEW Eurodrive Spar Western Cape SSAB South Africa (Pty) Ltd Tenova Zest Electric Motors (Pty) Ltd
Tel: (011) 867-0902 Fax: (011) 867-0036 Email: saimh@global.co.za www.saimh.co.za
BULK HANDLING TODAY
August 2017
5
6
BULK HANDLING TODAY
August 2017
BULK HANDLING TODAY
August 2017
7
8
BULK HANDLING TODAY
August 2017
®
NEW!
CLEANSCRAPE CLEANER from Martin Engineering
A REVOLUTIONARY INNOVATION IN BELT CLEANING TECHNOLOGY. • Lasts up to four times as long as traditional cleaners. • Easy to install with little ongoing maintenance, requiring only one tensioner adjustment EVER! • Offers the lowest blade-to-belt pressure of any cleaner on the market. • You can put it anywhere! Installed at an angle, it requires very little space for installation. • Suitable for both mechanical and vulcanized splices because of its durable tungsten carbide tips, which are available in multiple grades of carbide to match your application. The Bottom Line: The CleanScrape® Cleaner is an innovative, durable metaltipped belt cleaner that provides maximum cleaning efficiency without compromising your belt. call +27 13 656 5135 email feedback@martin-eng.com visit martin-eng.co.za
A GLOBAL FAMILY
® Registered trademark of Martin Engineering Company in the US and other select locations. © 2017 Martin Engineering Company. Additional information can be obtained at www.martin-eng.com/trademarks and www.martin-eng.com/patents.
BULK HANDLING TODAY
August 2017
9
10
BULK HANDLING TODAY
August 2017
BULK HANDLING TODAY
August 2017
11
BULK HANDLING TODAY
August 2017
13
C15522
THE GLOBAL STANDARD IN CRANES AND HOISTS DESIGN • MANUFACTURE • SERVICE • SALES As a global manufacturer and provider of cranes in varying industries, Condra provides high quality engineering, flexible inhouse design and an impressive range of products to mining, shipping, steel, fabrication, robotics, railways and ports. Since 1966, Condra has mastered the engineering, manufacturing and installation of cranes all over the world to large, medium and small industries. We are constantly innovating to provide manual, electric and combo cranes that provide solution to lifting, hooks, grabbing, magnets, ladles, buckets or stacking duties.
Overhead travelling cranes Wire rope hoists Portal or semi-portal cranes and bridge cranes Cantilever cranes (pillar, jib and wall)
Tel: +27 11 776 6000 | 0861 CONDRA (266372) | 24hr Mobile: +27 82 491 7525 | Email: sales@condra.co.za
www.condra.co.za South Africa | Africa | Middle East | Europe | Russia | Australia | South America | North America
BULK HANDLING TODAY
August 2017
15
CELEBRATES 30 YEARS OF EXCELLENCE AND 10 YEAR PARTNERSHIP WITH Shutterlock (Pty) Ltd situated in Randfontein, Gauteng is celebrating its 30th Anniversary in 2017. Shutterlock was founded in 1987 by its current CEO Mr. J Dean van Zyl, 30 years later Mr. van Zyl remains CEO and is an integral part of the Company’s operation. Since Shutterlock’s inception, it has always positioned itself within the Mining and allied industries as an organisation driven by quality and as such strategically associates itself with world-renowned brands, i.e. Crosby, Bridon, Kito & McKinnon. In celebration of 10 years’ cooperation with Crosby, Shutterlock is proud to announce the extension of its product offering to now include the Crosby Platinum Line Gr100 chain and fittings. “Taking Crosby G100 and including it in our stocking and distribution channels seems to be the next logical step to position Shutterlock as the leading supplier of top quality lifting equipment in South Africa.” said Dean van Zyl, CEO of Shutterlock. With 30 years of customer needs research development of OEM orientation and the re-engineering of “best practise” principles, Shutterlock is not only regarded as a pioneer and an industry leader but at the forefront of comprehensively satisfying ever changing industry standards and demands. Shutterlock is focused on providing quality solutions to customers and maintaining a quality promise to all who may be of service to the organisation as well as the entities who serve Shutterlock. A focus was placed on providing solutions to HDPSA individuals who are employed by Shutterlock and as such a BEE Loyalty trust was birthed to which all HDSPA employees belong. Shutterlock is a Level 3 B-BBEE Organisation with 110% Procurement recognition.
+27 (0) 11 412 2918
Left: Jason Colwell, Managing Director of Crosby (EMEA) Right: J Dean van Zyl CEO of Shutterlock
Crosby is a leading manufacturer of premium accessories used in lifting and rigging applications. Based in the US, with fabrication facilities in both the US and Europe the company has the reputation around the world for providing a broad range of products suitable for the most demanding of operation conditions with uncompromising quality. Products include chain fittings, wire rope clips, hooks, shackles, lifting clamps, hoist rings, overhaul balls, snatch blocks, crane blocks and sheaves. Crosby also provides a “world class” training program, focusing on the proper application of Crosby Products. The Crosby Platinum Line of chain fittings, is a complete range of Gr100 chain fittings with various features setting the standard for premium chain fittings, in compliance with EN standards. Crosby Grade 100 products achieve properties such as WLL, ductility, fatigue and toughness due to careful design. Simply changing the heat treat process to increase the Working Load Limit has the potential of sacrificing the other three properties. For Crosby, that was not an option! For more information about Shutterlock & The Crosby Group, please visit www.southafrica.thecrosbygroup.com
w w w. s h u t t e r l o c k . c o . z a
Rudi Swanepoel, head of projects at SEW
Premier supplier of conveyor equipment.
[t]+2711 255 1600 | [f ]+2711 825 3592 | [c] +27 73 196 3805 [e]conveyors-za@rulmeca.com | [w] www.melcoconveyors.com [a] Cnr. Jack Pienaar and Hertzog Street, Germiston South, Ext 7
BULK HANDLING TODAY
August 2017
17
The nature of the South African mining industry makes local engineers uniquely equipped to deal with any type of mining landscape
BULK HANDLING TODAY
August 2017
19
Tough demands have met their match.
With a hydraulic drive system from Hägglunds, you get compact, durable power - without foundations or gearbox. A full range of rugged motor types and complete solutions for monitoring and control give you total assurance, even in the most demanding applications. Let us know your demands. Hägglunds Drives South Africa (Pty) Ltd P.O.Box 2851, 1610 Edenvale, Johannesburg Phone: + 27 (0)11 454 4933, Fax: +27 (0)11 454 5088 E-mail: info@za.hagglunds.com, www.hagglunds.com
Our drive is your performance.
BULK HANDLING TODAY
August 2017
21
Marian Otrebski, owner of DynamikaMH Consultants
Long horizontal heavy conveyor Conveyor length about 1 000m 6%
9%
1%
18% 61%
5% Indentation rolling resistance Belt flexural resistance Material flexural resistance
Idler bearing resistance Secondary resistances Special resistances
Figure 1. Percentage distribution of the individual motion resistances of a horizontal conveyor.
22
BULK HANDLING TODAY
August 2017
Conveyor
Length (m)
Capacity (t/h)
Material
Belt Width (mm)
Belt Speed (m/s)
Trough Angle (deg)
Volumetric Top Idler Utilisation Spacing (%) (m)
Top Idler Diameter (mm)
Drive Location
Take Up Type
A
2160
1500
Copper ore
1200
1,9
35
71,0
1,2
152
Head end
h..gravity
B
2400
10000
Iron ore
1650
4,3
45
85,0
1,0
178
C D E
3450 3450 4000
2000 2000 900
Coal Coal Bauxite
1050 900 1200
5,5 7,5 2,3
45 45 45
87,0 89,6 79,0
3,0 3,0 1,2
152 178 127
F
6900
2400
Coal
1050
5,7
45
98,3
2,2
152
G
7200
2700
Coal
1500
6,6
45
50,0
4,0
219
H
8500
2000
Coal
1200
4,0
35
99,0
2,0
152
I
11500
1600
Coal
1200
4,5
45
69,0
4,0
152
J
12300
2000
Coal
1200
4,0
35
99,0
2,0
152
K
21000
2000
Iron ore
900
4,5
35
65,0
4,0
152
L
24600
1950
Coal
1050
7,5
35
73,0
4,0
178
Head and tail ends Head end Head end Head end Head and tail ends Head end Head and tail ends Head and tail ends Head and tail ends Head and tail ends Head and tail ends
h..gravity h..gravity h.gravity h.gravity h.garvity h.gravity Electric winch h.gravity Electric winch h,gravity h.gravity
Table 1. Conveyor technical details Case 1 2 3 4 5
Description Base Case. Conveyor as designed Commercially available LRR belt bottom cover Specially developed LRR belt bottom cover Increased diameter of the trough central roll Increased diameter of the top rolls
6
Unequal length trough rolls
7
Increased /decreased trough idler spacing
8
Low resistance trough idlers
9
Combined commercial LRR cover, low resistance idlers and increased trough idler diameter
Comments Commercial grade M of tested parameters Commercial LRR (Low Rolling Resistance) grade of tested parameters Non commercial Special LRR grade of tested parameters. Roll diameter increased by one size Roll diameter increased by one size Central roll equivalent to a belt one size narrower, wing rolls – one size wider Conveyors A,B,F,H, and J spacing increased to 2 x nominal spacing Conveyors C,D,G,I,K and L spacing decreased to 0,5 x nominal spacing Rolls of very low rotating resistance as obtained from tests – single supplier Cases 2, 5 and 8 combined
BULK HANDLING TODAY
August 2017
23
Figure 2. Combined results of the analysed conveyors and cases.
Figure 3. Values of C*f as a function of conveyor length. Grade M cover ( Base Case 1), LRR cover (Case 2) and Special LRR cover (Case 3)
24
BULK HANDLING TODAY
August 2017
Figure 4. Values of C*f as a function of conveyor length. Grade M cover (Base Case 1), increased central trough roll diameter (Case 4), increased trough rolls diameter (Case 5), unequal trough rolls length (Case 6), low resistant idlers (Case 8).
Figure 5. Values of C*f as a function of conveyor length. Grade M cover (Base Case 1), LRR cover (Case 2), Special LRR cover (Case 3), combined LRR cover, increased trough roll diameter, low resistance idlers (Case 8)
BULK HANDLING TODAY
August 2017
25
Your boutique business destination Surrounded by lush gardens in the hub of Johannesburg’s northern suburbs, The Peartree in Craighall Park caters for groups of two through to 100 guests in nine well-appointed and equipped business suites. Breakfast meetings, working lunches, indoor or outdoor dining, half-day and full-day packages including all welcome refreshments, teas and lunches are offered in Standard, Gold and Platinum packages. Secure parking, business centre, fibre optic broadband AV, lockable space, all underpinned by highly qualified and helpful staff dedicated to ensuring your event is a success, make The Peartree a destination of choice.
www.thepeartree.co.za e-mail: info@thepeartree.co.za Tel: 011 781 1401 41 St. Albans Ave, Craighall Park
More significant benefits are obtained when all three troughing rolls are of bigger diameter while further improvement is achieved when the idlers are of low resistance type
Figure 6. Values of C*f as a function of idler load Grade M cover (Base Case 1)
Figure 7. Value of C*f as a function of belt volumetric utilisation. Grade M cover (Base Case 1)
BULK HANDLING TODAY
August 2017
27
Figure 8. Conveyor unit power demand as a function of C*f (Base Case 1).
Figure 9. Conveyor unit power demand as a function of C*f (Base Case 1).
At 5% gradient the material lift resistance constitutes 66% of the total conveyor resistance while the indentation rolling resistance second largest at only 22%
28
BULK HANDLING TODAY
August 2017
The best results have been achieved by application of highly efficient belt bottom cover (Special LRR grade) which produced up to 40% frictional resistance reduction
• Motorised cable reeling drums • Slipring assemblies (low & medium voltage) • Spring-driven cable reeling drums • Slipring assemblies (Accessories)
BULK HANDLING TODAY
August 2017
29
Grant Sheppard and Magnus Rieger
30
BULK HANDLING TODAY
August 2017
Demag_DMR Engineering News 21 July 2017 opt 1.qxp_Layout 1 2017/07/07 10:37 AM Page 1
BULK HANDLING TODAY
August 2017
31
27 – 30 September 2017 JHB Expo Centre, Nasrec The most valuable value proposition for the Logistics Sector Be part of the largest and most comprehensive trade fair and business platform for the Logistics Sector in subSaharan Africa; not to be an active participant is to miss out on the personal contact, business potential and opportunities that can only be unlocked at a trade fair of this stature!
An innovative and pioneering trade fair for the Logistics Sector to provide a dynamic business platform, targeting trade visitors from sub-Saharan Africa.
Business Matchmaking Services Business matchmaking services will be available to exhibitors before and during the Show.
Conference and Workshop Programme Stay abreast of the latest developments in the industry by participating in the Conference and Workshop Fringe Programme during the Show.
Exhibition Profile and Product Groups • Logistics • Materials Handling • Distribution, Storage & Warehousing • Specialist Service Providers • Industry Bodies
Increased value proposition and optimising synergies through co-location of Trade Fairs Scalex Johannesburg will be co-located with Futuroad Expo Johannesburg , serving the Truck, Bus and Commercial Vehicle Sectors, and Automechanika Johannesburg, serving the automotive aftermarket (608 exhibitors in 2015, 400 international). As with Scalex Johannesburg, these Shows target trade visitors from the sub-Saharan African Region, optimising the trade visitors.
South Africa´s leading trade fair for transport systems, infrastructure and logistics solutions targeting trade visitors from the Sub-Saharan Region.
27. – 30. 9. 2017 JHB Expo Centre, Nasrec
Contact Us: Show Manager: Robert Kaiser Tel: 010 599 6165 robert.kaiser@southafrica.messefrankfurt.com Enquiries: Tracy Gounden Tel: 079 545 4103 tracy.gounden@southafrica.messefrankfurt.com
3-in-1 Co-located events
Co-located with:
27.09 - 30.09.2017 Johannesburg Expo Centre
South Africa´s leading trade fair for transport systems, infrastructure and logistics solutions targeting trade visitors for the Sub-Saharan Region Fair Dates Opening Hours Location
27 - 30 September 2017 (biennial) 09:00 – 18:00; Saturday 09:00 – 13:00 Johannesburg Expo Centre, Johannesburg, South Africa
Co-Located with
Automechanika Johannesburg Futuroad Expo Johannesburg
Exhibition Profile
Scalex Johannesburg is sub-Saharan Africa's leading professional event for the logistics and materials handling sector bringing regional industry, buyers and suppliers together to share ideas and further business relationships.
Automotive Service Industry Transport, Trucks, Buses & Trailers
Co-location with Automechanika Johannesburg and Futuroad Expo Johannesburg provides participants with opportunity to launch new products and showcase innovative products, services and technology at one all-inclusive industry event. Product Groups
Logistics - Combined Transport Systems; Container & Cargo Handling; Container Manufacturers & Container Sales; Courier, Express & Parcel Services; Customs Clearing Agents; Freight Distribution Centres; Freight Forwarding Companies & Agents; Intralogistics Solutions; Logistics Companies & Service Providers; Roll On and Roll Off Materials Handling - Automated & Driverless transport systems; Castors, Wheels & Tyres; Conveyors & Continuous Handling Equipment; Cranes & Hoists; Forklifts & Hand Lift Trucks; Ground Conveyors & Accessories; Hydraulic & Pneumatic Lifts & Ramps; Industrial Trucks & Trailers; Ladder Systems; Lifts; Loading & Unloading Equipment; Stackers, Trolleys & Carousels; Straddle Loaders; Warehouse Vehicles Distribution, Storage & Warehousing - Cold Chain Equipment & Management; Consignment Tracking & Identification; Distribution & Loading Facilities; Floor Marking & Floor Protection; Hazardous Goods Handling & Storage; Labelling & Identification; Management & Integration Systems; Mobile, Wireless & Telecommunications; Order-Picking Equipment & Systems; Packing, Weighing & Measuring; Pallets, Bins & Containers; Process & Automation Control; Racks & Racking; Research, Planning & Development; Robotics Systems; Stock Management Systems; Storage Systems & Equipment; Warehouse Fire Control Systems Specialist Service Providers - Access Control & ID Systems; Advisory, Business Intelligence & Consultation Firms; Asset Protection & Risk Management; Certification, Education & Training; Emergency Services & Assistance; Finance, Leasing & Insurance; ICT Solutions & Integration; Investment & Project Finance; Research, Planning & Development; Safety & Protection; Security Consultants & Providers; Security Training & Consultants Industry Bodies - Industrial & Supplier Development Parks; Industry Associations; Industry institutions and specialist publishers; Intellectual Property Rights Organisations; Investment Promotion Agencies; Logistics Hubs & Free Trade Zones; Research, Planning & Development; Trade Facilitation & Development Bodies
Admission Fee
Trade visitors only. No admission fee for pre-registered trade visitors. On-site registration fee R50 per person.
Fringe Programme
Conferences, workshops and business matchmaking service
Contact
Scalex Johannesburg P O Box 3175, Cresta, 2118 Tel: +27 11 494 5003 Fax: +27 11 494 5004
Robert Kaiser, Show Manager robert.kaiser@southafrica.messefrankfurt.com Perusha Singh, Enquiries / Bookings perusha.singh@southafrica.messefrankfurt.com
Make to to visit ‘Supply Chain Today’s’ at Scalex the Scalex show Makesure sure visit the Promech standstand at the show
MARKET FORUM
havas 14530/E
RARE IS REWARDING The Narina Trogon - One of Africa’s most elusive birds. A rare breed indeed. Rather like graduate professionals. Contact your PPS-accredited financial adviser or visit pps.co.za to see if you qualify.
PPS is an authorised Financial Services Provider.
34
BULK HANDLING TODAY
August 2017
MARKET FORUM
ABSOLUTE MATERIAL FLOW CONTROL
CHUTE SYSTEMS & SOLUTIONS • Optimum material flow • Up to 80% decrease in material degradation
• Reduced dust and noise levels • Virtually maintenance free
• Greatly reduced spillage • Significant reduction in belt damage
Tel: +27 (0) 11 827-9372 email: info@webachutes.com
www.webachutes.com
BULK HANDLING TODAY
August 2017
35
MARKET FORUM
36
BULK HANDLING TODAY
August 2017
MARKET FORUM
Comfort zone: the uneven ground and the gantry´s high centre of gravity are no problem for the Scheuerle SPMT.
BULK HANDLING TODAY
August 2017
37
MARKET FORUM
16 - 20 OCtOber 2017
Durban ICC / Inkosi Albert Luthuli International Convention Centre A FULL WeeK OF ACtIVItIeS DeDICAteD tO GrOWING KWAZULU-NAtAL'SeXPOrt bUSINeSSeS AND INDUStrIeS
MASTERCLASS AND TRAINING
NETWORKING AND RECEPTIONS
CONFERENCES AND WORKSHOPS
Make sure you join us at the 2017 KZN Export Week - the annual programme of Trade Invest KZN developed to recognise, promote and assist with growing KwaZulu-Natal’s export businesses and industries!
AWARDS
BUSINESS SHOWCASE / EXPO
WHAt tO eXPeCt? 600+ AtteNDeeS: Network and build new relationships with fellow attendees from across the continent.
GOLF DAY CHALLENGE tIKZ Nw offe ill be ri plac ng 100 F es to ree em expo rters erging ! out if yo To find u qu al c o n danie tact ify l.claa se n@e
xport
week .c
o.za
30 tOP SPeAKerS: •
Meet trade partners and associations who can help you to reach new markets
•
Network and build new relationships with fellow attendees from across the continent
•
Hear some of the top business minds share their tips and stories on how to build a global business
Hear some of the top business minds share their tips and stories on how to build a global business.
20 LeADING SerVICe PrOVIDerS: Learn about the latest technologies and services on offer from leading service providers participating in the expo showcase.
10 COUNtrIeS: Meet with global trade partners and associations who can help you to reach new markets.
Limited seats available! Contact us today! +27 87 890 0898 Richard Desha: richard.desha@exportweek.co.za Phyllis Wasarirevu: phyllis.wasarirevu@exportweek.co.za
Presented by:
Supported by:
Media partners:
Co-located with:
rail www.exportweek.co.za
BMG WORLD , JHB , RSA .
SITE REVEAL
14-15 SEP
4