Prostar Solar Module PPS Series (10W-180W)
Solar Module Solar Module Summarize Solar Module is the core part of solar PV power systems,also is the highest value part of it. The function of Solor Module is to convert the sun's radiation to electrical energy, or transfer it to battery and store in it, or to drive the load running. The Product has been widely used in space and ground, it mainly used for power generation systems, charging systems, road lighting and traffic signs areas. It could offer a wide range of power and voltage, and with high conversion efficiency, and long service life.
Applied Scope Countryside and remote areas
Small-scale irrigation pumping pumps
Vehicle and ship systems
Home and vacation villa
Emergency System
Wind-Light complementary power supply system
Railway signal
Emergency communication system
Beacon and beacon lights
Street lighting system
Small-scale desalination
Cathodic protection system
Water quality and environmental data monitoring system
Solar Module
Main Characteristic First-class production technology and packaging technology. Adopting the world's leading technology of silicon and polycrystalline silicon cells, power density, peak hours more battery power, higher conversion efficiency. Beautiful, stable, easy to take down the anodic aluminum frame electric degrees and has a wind-resistant, anti-snow function.
By the high transmittance, low iron tempered glass, anti-aging of the EVA (polyethylene - vinyl acetate), highperformance crystalline silicon solar cells, good Weather resistance TPT (fluoroplastics composite membrane) by pyramid , has a good Weather resistance and anti-UV, hail, water-proof capacity. Built-in bypass diode inside the junction box, which could prevent the effects dark spots of local damage to cells.
After the minus reflection process of the battery surface, it increases the absorption rate.
Solar Module bracket configuration Low iron tempered EVA FILM
Solar power chip
Aluminum alloy frame EVA FILM
TPT Dorsal membrane
The Solar module combines the Monocrystalline (polysilicon) solar cells in series,with a high current density and smaller size. The solar panels are aluminum alloy frame, the former board and backplane.
From laminated packaging; components on the metal frame has mounting holes, easy to use, and with the solid structure 3mm thick tempered glass front panel, it offered the high-performance protection for resisting the impact of environmental. And it has a high transmission rate of direct light and scattered light.
Technical Specification Model
PPS10W
PPS20W
PPS30W
PPS40W
PPS50W
PPS60W
PPS70W
Polycrystalline Silicon
Material Peak Power
10Wp
20Wp
30Wp
40Wp
50Wp
60Wp
70Wp
Peak Current
0.55A
1.1A
1.66A
2.2A
2.77A
3.3A
3.88A
Peak Voltage
18V
Short Circuit Current
0.61A
1.21A
1.83A
2.44A
3.05A
3.66A
4.28A
Open Circuit Voltage
20.8V
20.8V
21V
21V
21V
21V
21V
Chip Quantity
36
Length
360
560
630
630
780
780
1200
Width
290
360
550
550
670
670
550
Thickness
25
25
35
35
35
35
35
Weight (Kg)
1.05
2.0
3.47
3.47
5.23
5.23
6.6
Model
PPS80W
PPS90W
PPS100W
PPS120W
PPS130W
PPS150W
PPS180W
Size(mm)
Polycrystalline Silicon
Material Peak Power
80Wp
90Wp
100Wp
120Wp
130Wp
150Wp
180Wp
Peak Current
4.4A
5A
5.5A
6.6A
3.6A
4.17A
5A
Peak Voltage
18V
36V
Short Circuit Current
4.88A
5.5A
6.05A
7.33A
3.97A
4.58A
5.5A
Open Circuit Voltage
21V
39.6V
39.8V
40V
42V
42V
42V
Chip Quantity
36
72
Length
1200
1200
1500
1500
1600
1600
1600
Width
550
550
700
700
830
830
830
Thickness
35
35
50
50
50
50
50
6.6
6.6
10.5
10.5
13.3
13.3
13.3
Size(mm)
Weight (Kg)
Remarks: 1. Test standards: solar spectrum AM1.5, Irradiance: 1000W
, the battery temperature: 25
.
2. To be ordered with different requirements by customers 3. Product specifications are subject to change without notice.
Area Agent:
Prostar Solar Module PPS Series (10W-180W)