Australasian Timber Magazine - November 2018 by Provincial Press Group

NOVEMBER 2018

."/6'"$563& t 5&$)/0-0(: t %&4*(/ t $0/4536$5*0/

Incorporating Australian and New Zealand Timberman – Established 1977.

HOW TO GET A ‘CUT’ ABOVE THE REST CERTIFIED CYPRESS A ROBUST CHOICE

HEART AND SOUL INTO GLT CAMPAIGN NEXT EDITION: AUSTRALIAN TIMBER DESIGN AWARDS

Innovation in timber engineering www.hundegger.com.au

The timber construction expert. Sensationally multifunctional. WALLTEQ M-340

WALLTEQ M-340 Multifunction bridge

Versatile DQG XVHU IULHQGO\ )OH[LEOH SURGXFWLRQ RI DOO HOHPHQWV W\SHV IRU EDWFK VL]H Efficient production processes 6KRUW FKDQJHRYHU WLPHV IRU GLIIHUHQW DQG FRPSOH[ HOHPHQWV Continuous data flow Fully automated data transfer from &$'

+20$* $XVWUDOLD 3W\ /WG 7DVKD 3ODFH .LQJV 3DUN 16: VDOHV DXVWUDOLD#KRPDJ FRP www.homag.com/weinmann

YOUR SOLUTION

O S I

T R U T

L O O R I N G

A S S E T T E S

PosiStrut CASSETTES are

Many

builders

and

FLOORING customers.

developers

â&#x20AC;&#x201C;

especially

those

working

large,

multi-storey

projects

are

specifying

PosiStrut

Flooring Cassettes. The floor includes allowances for deflections, reactions, plumbing locations, voids stacks, wastes and duct chases and recessed wet areas. Plus, PosiStrut Flooring Cassettes can utilise top chord support for ease of installation. This means they can be craned into position on-site and fixed in minutes! The implications this has on-site are substantialâ&#x20AC;Ś

MGB0852

with more square metres of flooring laid by less labour in a lot less time!

For more information about MiTek PosiStrut Flooring Cassettes, call your local state office or visit: mitek.com.au

HOME OF GANG-NAIL BUILDING SYSTEMS VIC (03) 8795 8888

NSW (02) 8525 8000

QLD (07) 3861 2100

SA (08) 8234 1326

WA (08) 9412 3534

mitek.com.au

NEWS

Ŷ Reliable choice. White cypress was used for the cladding of the skin, balconies and ground ﬂoor decking of the stylish Macq 01 Hotel on Hobart’s waterfront. (Photo Adam Gibson)

Certified cypress a robust choice for hotel on historic site in Hobart

he expression ‘if these walls could talk’ could well apply to the new Macq 01 Hotel on Hobart’s waterfront. However, there is little about the outward appearance of this stylish contemporary 114-suite hotel to suggest its location’s dark past, although the interiors feature quirky images of the colourful characters who once eked out a living here. On closer inspection, there are details introduced by architects Circa Morris Nunn that reﬂect the pier’s robust,

functional construction such as the visuallyheavy timber framing of the building. The integration of the new hotel with its neighbouring heritage buildings has been held up by Hobart community groups as a leading example of how old and new can co-exist in this historic location. As well as solving challenge of seamlessly blending old and new, timber was selected as the preferred material for cladding and decking to deal with the weight-bearing limitations of existing con-

crete wharf piles which previously supported a single-storey shed. Timber cladding and decking around a steel frame was a lightweight solution which in no way compromised on quality and appeared more inkeeping with the historic waterfront location. White cypress with Responsible Wood accreditation was selected for its robust characteristics and ability to ‘grey-off’ and age gracefully in a marine environment. Timber was selected for the decking and for a large central vertical atrium

that runs through the central space on each level of the hotel providing an opening for natural daylight from above. Externally and internally it is timber which deﬁnes the hotel’s character. Circa Morris Nunn director Robert Morris Nunn explains the importance of specifying certiﬁed timber: “Circa Morris Nunn has a proud history of innovative timber use. As the value of timber as a sustainable construction material becomes more widely known it is important for us, as ar-

chitects, to take responsibility and only specify certiﬁed timbers. This is particularly the case in Tasmania where forest practices are at the forefront of public consciousness. “Public buildings, or those commercial buildings with a public interface such as Macq01, are increasingly being constructed using timber and chain of custody is a critical component of this public awareness.” Using timber from Hurford Wholesale, a timber mill certiﬁed by Responsible Wood, the

Ŷ On the waterfront. Timber is an important contextual cue to the working nature of this Hobart port.

australasian

Incorporating Australian and New Zealand Timberman – Established 1977.

November 2018 Vol.26, No. 7 Established 1977

Publisher and Chief Executive: Hartley Higgins General Manager: John Turner Editorial: John Hudswell j.hudswell@ryanmediapl.com.au Adelaide: (08) 8369 9512 Out of ofﬁce: (08) 7127 6370

Advertising: Kent Humphrys k.humphrys@ryanmediapl.com.au Adelaide: (08) 8369 9516 Timber Classiﬁeds: k.humphrys@ryanmediapl.com.au Adelaide: (08) 8369 9516 Design and Artwork: Peter Frezzini with the NEM Creative team

architects enjoyed assurance that timber was not only of optimum quality but was sourced from a forest exercising best practice in sustainability. Harnessing the architectural spirit of the surrounding pier buildings, Macq01 is a shining example of how timber can be used to link old and new visually while recognising the critical importance of best practice in sustainable forestry. And it pays tribute to the past without compromising our forests’ future.

(Photo Stu Gibson)

Subscriptions: subs@forestsandtimber.com.au Adelaide: (08) 8369 9522 Accounts: Adelaide: (08) 8369 9555 Postal Address: 630 Regency Road, Broadview, South Australia 5083 Phone: (08) 8369 9555 Fax: (08) 8369 9501

FRONT PAGE: Hyne Timber CNC automated joinery capability. Read more on page 18

Conditions: The opinions expressed in Australasian Timber Magazine are not necessarily the opinions of or endorsed by the editor or publisher unless otherwise stated. All articles submitted for publication become the property of the publisher. All material in Australasian Timber Magazine copyright © Ryan Media. All rights reserved. No part may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical including information and retrieval systems) without written permission of the publisher. While every effort has been made to ensure the accuracy of information, the published will not accept responsibility for errors or omissions, or for any consequences arising from reliance on information published.

AUSTRALASIAN TIMBER November 2018

www.timberbiz.com.au

TURN TO THE TURBO-DRIVE

CUT. STACK. PRINT. MILL

HUNDEGGER TURBO-DRIVE â&#x20AC;&#x153;CUTâ&#x20AC;? The Hundegger TURBO-Drive has enjoyed tremendous success in the region since its local launch a little over 18 months HNV 0[Z Z\WLY MHZ[ VWLYH[PVU Ă&#x2026; L_PIPSP[` ZTHSS MVV[WYPU[ HUK \ZLY MYPLUKS` PU[LYMHJL OHZ THKL P[ [OL THJOPUL VM JOVPJL MVY serious frame and truss operations. Many of the Hundegger TURBO-Drive machines are running multiple shifts and cutting stacked components, situated in operations where it is the second, third or fourth machine in operation. /V^L]LY ^L UV^ OH]L H YL]PZLK ZWLJPĂ&#x201E; JH[PVU [OH[ HSSV^Z ZTHSSLY VY UL^LY VWLYH[PVUZ [V LUQV` HSS [OL ILULĂ&#x201E; [Z VM H Hundegger CNC saw â&#x20AC;&#x201C; without compromise. The Hundegger TURBO-Drive CUT!

The Hundegger TURBO-Drive CUT â&#x20AC;&#x201C; MVY \UKLY

;OL ;<9)6 +YP]L *\[ PZ Z\WWSPLK ^P[O HU H\[VTH[LK PUMLLK HUK V\[MLLK H_PZ ZLY]V JVU[YVSSLK ZH^ \UP[ ^HZ[L JVU]L`VYZ WYPU[PUN ZLJ\YP[` MLUJL WV^LYM\S TV[VYZ JLU[YHSPZLK S\IYPJH[PVU WYVK\J[PVU TVUP[VY ZOVY[ WPLJL OHUKSPUN M\SS ZVM[^HYL HUK ;Y\ZZ <0 [V\JO ZJYLLU HUK PUJS\KLZ KLSP]LY` PUZ[HSSH[PVU [YHPUPUN HUK L]LU H ZWHYL ZH^ ISHKL Other packages available stand-alone or combined include: Hundegger TURBO-Drive â&#x20AC;&#x153;STACKâ&#x20AC;? (SS [OL HIV]L MLH[\YLZ WS\Z PUJYLHZLK Z[HJRPUN JHWHIPSP[` HUK TH[LYPHS OHUKSPUN MVY even greater productivity gains

Hundegger TURBO-Drive â&#x20AC;&#x153;PRINTâ&#x20AC;? (SS [OL HIV]L MLH[\YLZ WS\Z L_[LUKLK WYPU[PUN JHWHIPSP[` ;L_[ WHY[ U\TILYZ QVI 0+ L[J

Hundegger TURBO-Drive â&#x20AC;&#x153;MILLâ&#x20AC;? (SS [OL HIV]L MLH[\YLZ WS\Z [VVS JHYYPLY ZVM[ Z[HY[LY MVY PUMLLK Z`Z[LT HUK WV^LYM\S R> ]LY[PJHS TPSSPUN OLHK HUK KLKPJH[LK KV\ISL TP[YL [VVS Hundegger TURBO-Drive â&#x20AC;&#x153;PLUSâ&#x20AC;? (SS [OL HIV]L MLH[\YLZ WS\Z KYP]LU V\[MLLK JOHPUZ MVY faster and more automated operation Whatever your requirements, the Hundegger TURBO-Drive has a package to suit, all with localised Technical Support. (SS THJOPULZ JHU IL \WNYHKLK H[ H SH[LY KH[L [V LUZ\YL `V\Y PU]LZ[TLU[ YL[\YUZ M\SS ]HS\L -VY KL[HPSLK ZWLJPĂ&#x201E; JH[PVUZ JVU[HJ[ :HT 9V^L VU ZHT YV^L'O\UKLNLY JVT H\

NEWS

Taking the BS out of equipment finance In a world where margins are tight, it’s more about the leftover than the turnover By Mark O’Donoghue CEO & Founder of Finlease

aving spent 30 years ﬁnancing equipment for a diverse range of long term and new clients in many capital intensive industries, I thought it would assist to take the BS out of some of the stories I have heard over the years.

Interest rates If you are a solid company with good trading results, the interest rates available at present range from 4.5% to 5.25% depending on the asset and term. If you are paying more than this then it may be a case of what your provider

would LIKE to charge you more than what is actually available to you in the market.

When the payments don’t seem to reflect the interest-rate Unfortunately there are circumstances in the market where the interest rate quoted to the client is not actually reflected in the monthly payment. The problem here is that unless you have a finance calculator to work it out you are often none the wiser. There are plenty of “online” calculators where you can check, including one on the Finlease website: https://www.finlease. com.au/equipment-finance-calculator.html)

Take heed, unless you actually check it, there is really no way of knowing, so it is worth spending ﬁve minutes online to ensure you are getting what you have been told.

Banks don’t finance Used or Private Sale machines This is simply not the case, there are plenty of competitive financiers who will happily finance used machines including private sales at good interest rates and often there are significant savings to be made by going down this track. Yes, there are a couple of extra steps in the finance process including an inspection of the asset but these are easily ar-

ranged. Care does need to be taken however to ensure that the asset being purchased is not currently either under finance or caught up under a GSA (formally known as a fixed and floating charge), but this is easily checked through a company search on the vendor.

My bank won’t provide any further finance until they have reviewed my accounts That may be the case with your bank, but there are a swag of other competitive financiers out there who will finance vehicles and equipment at good interest rates without the need for financials provided the

company has been going for 2 to 3 years and has a clean credit history. Where assets are being upgraded, there are no ﬁnancials policies that can ﬁnance replacement equipment up to $500,000.

We use our bank as brokers are more expensive This is simply not the case and easily tested by obtaining finance quotes so you can compare the monthly finance costs. Larger broking firms place very large volumes to market ($500 million p/a in our case) and this drives substantial discounts. Any decent broker will be looking for a 20

year relationship and will act in a manner which ensures the continuation of that relationship. These brokers should also have plenty of feedback from the clients on independent review websites such as Product Review, Google Review or True Local. Money is a raw material no different to fuel and must be accessed in the easiest, cheapest manner backed by good service. In a world where margins are tight, it’s more about the leftover than the turnover, so it is essential to keep all costs under control including ﬁnance costs.

BETTER. FAST. DIFFERENT.

Need finance approval quicker than a snail’s pace? Finding a long term finance option that is easy, flexible and allows you to focus on what you do best shouldn’t be as hard as banks make it! Finlease specialises in equipment & vehicle finance with a team focused on speed, personal service and small business expertise, they really are Better than a Bank in so many ways.

MICHAEL ABBERTON 0488 480 463 mabberton@ﬁnlease.com.au FINLEASE.COM.AU

Australian Credit Licence: 390584 Finlease (Australia) Pty Ltd

AUSTRALASIAN TIMBER November 2018

www.timberbiz.com.au

NEWS

AKD Softwoods continues its domestic growth in Australia

ntegrated Australian forestry and timber processing company Associated Kiln Driers Pty Ltd (AKD Softwoods), based at Colac in South Western Victoria, is scheduled to take ownership of the New South Wales timber mills and distribution centre currently operated by Carter Holt Harvey Timber Pty Ltd on 1 November 2018. The sale which includes the Tumut sawmill and Gilmore treatment facility, a 50% interest in the Highland Pine Products (HPP) joint venture in Oberon, and the Berkeley Vale Distribution Centre. “The New South Wales timber acquisitions will be a perfect ﬁt for AKD Softwoods,

supporting our existing facilities,” CEO Shane Vicary said after the group ﬁnalised negotiations with Carter Holt Harvey. The Tumut sawmill (located 400 kilometres south west of Sydney) processes approximately 565,000m3 of sawlogs and produces a range of predominantly structural products primarily for supply in Victoria and NSW. The Gilmore treatment facility is a value adding site located in close proximity to the Tumut sawmill, producing a large volume of outdoor products. HPP processes approximately 600,000m3 of sawlog producing a range of structural products for the NSW market.

The Berkeley Vale Distribution Centre (located 100 kilometres north of Sydney) distributes product from the two sawmills and other external suppliers across Australia, primarily into the local NSW market. AKD Softwoods is an Australian company privately owned and operated, established in 1955. The business currently processes over 1,000,000m3 of sawlog across its Colac, Irrewarra, Caboolture and Yarram sawmills employing over 600 employees. The group also produces post and pole products at its three post and pole facilities. “We are very enthusiastic about the acquisition and look forward

to working with the new employees and providing all AKD employees with enhanced opportunities across the wider AKD group as a result of this transaction.” Through the group’s long history, AKD had continued to grow through a combination of strategic acquisitions and on-going capital investment in core business and core activities highlighting AKD’s propensity to invest in the industry over the long term. AKD also owns plantations in South Australia and Victoria. “The NSW timber acquisitions continues this approach and our commitment to this vibrant industry,” he said. “We believe that the future demand for quality

virgin wood ﬁbre in the Australian and International markets is strong. As a regional employer, AKD Softwoods plays an active part in supporting a variety of local community activities and sees its now over one thousand employees as the vital ingredient in its past and future success,” Shane added. “AKD Softwoods has invested and sustained its business, by building a stable foundation. This solid foundation includes stable ownership, long term customer relationships, our own plantations and signiﬁcant continual investment in state of the art processing facilities.” These foundations are constantly being enhanced by continued re-

investment in the AKD Softwoods business. AKD Softwoods services local markets through sustainable forestry practices and employs the latest processing technologies available to produce high quality products and is distinctive amongst its key competitors for its reputation as a high-quality producer, its exceptional customer service and its vertically integrated operations. Building an excellent reputation on its quality, service and ﬂexibility, AKD Softwoods has a wide range of products, and an end to end planning process that enables products to be manufactured to order and dispatched to customers all over Australia.

With the same quality and service you can trust, AKD is now in NSW.

www.timberbiz.com.au

AUSTRALASIAN TIMBER November 2018

Coastal Planer Upgrades (QKDQFH SHUIRUPDQFH DQG LPSURYH H඼FLHQF\ USNR’s Coastal Planer is designed for superior lumber surfacing DW VSHHGV RI ISP :LWK WKH ÁH[LELOLW\ WR ULEERQ IHHG RU FRQÀJXUH D JDS WKH &RDVWDO 3ODQHU SURYLGHV \HDUV RI FRQVLVWHQW DQG UHOLDEOH SURGXFWLRQ 5HQRZQHG IRU PD[LPL]LQJ TXDOLW\ DQG SURGXFWLRQ ZKLOH PLQLPL]LQJ GRZQWLPH WKH V\VWHP·V DGYDQFHG IHDWXUHV OLNH TXLFN FKDQJH FXWWHUKHDGV DXWRPDWLF VHW XS FKDQJHV DQG HDV\ DFFHVV PDLQWHQDQFH PDNH RSHUDWLQJ \RXU &RDVWDO 3ODQHU D EUHH]H 8615 RරHUV PDQ\ XSJUDGHV WKDW EUHDWKH QHZ OLIH LQWR \RXU ZRUNKRUVH &RDVWDO SODQHU LQFOXGLQJ WKH SDWHQWHG HOHFWULF GULYH FRQYHUVLRQ IRU ERWK WKH SODQHU DQG WKH IHHG WDEOH WKDW SURYLGHV FRQVLVWHQW DQG FRQÀJXUDEOH IHHG VSHHGV UHGXFHV PDLQWHQDQFH HOLPLQDWHV PDQ\ HQYLURQPHQWDO OLDELOLWLHV DQG LPSURYHV VDIHW\ $GGLWLRQDO XSJUDGH RSWLRQV WKDW NHHS \RXU V\VWHP UXQQLQJ H඼FLHQWO\ IRU \HDUV WR FRPH LQFOXGH Top and Side Head &KLSEUHDNHUV 7RS +HDG +\GUDXOLF 3UHVVXUH 3ODWHV 6LGH +HDG 6HWZRUNV +ROGRZQ 6KRHV DQG *XLGH 6KRH 5DSLG $GMXVW V\VWHPV Ask us about Coastal Planer upgrades today!

Millwide. Worldwide.

+1.360.225.8267

www.usnr.com

NEWS Crucial backing for timber researchers

Game, set and PEFC-matched!

hat do a Stradivarius violin and a PEFC-certified tabletennis racket have in common? Both are made of resonating wood, which gives the player an incomparable feeling. The story of the racket begins in the PEFC-certified forest of Paneveggio in Trentino, Italy. Famous for wood with resonance, the forest provides the perfect raw material for the world’s first PEFC-certified table tennis frame. Called Italy, the frame is part of the line Artte Telai, created by the Italian workshop Artigian Mobili. It is the first of a

series of rackets that will be PEFC-certiﬁed. Artte Telai offers various models of rackets, created for different playing styles and allowing for different degrees of speed, control and spin. This is possible through several plies and the use of different wood species. Each ply is made of a single piece of wood, without any joints, ensuring the ideal mechanical behavior and vibration transmission. The rackets therefore combine sustainability with excellent sport performance, and are used by many professional athletes.

www.timberbiz.com.au

Artigian Mobili is an artisan workshop based in Perugia, Italy. Having worked with wood for more than 50 years, the family business brings together tradition and innovation. Artigian Mobili has produced a range of timber products, including furniture, musical instruments and sound systems, before creating Artte Telai. Conscientious about corporate social responsibility, the certiﬁed company uses exclusively wood from sustainable forests, combining love for wood, craftsmanship and respect for nature.

For the past eight years, FWPA funding has allowed outstanding students to attend the World Conference on Timber Engineering (WCTE). This year eight students were awarded a $3,500 bursary to attend the WCTE in Seoul, South Korea. The students are all post-graduates who have chosen timber as the main theme of their research. One of the chosen students was Rebecca Cherry, who said the experience was invaluable. “The conference provided excellent networking opportunities for me. I learnt a lot from the presentations about a range of research topics and methodologies which relate to my own work,” said Rebecca. “I also found talking with so many other timber-focused PhD students very helpful

AUSTRALASIAN TIMBER November 2018

and motivating.” According to Hyne Timber’s Product Development Manager, Geoff Stringer, Hyne Timber recognises and values innovative partnerships. “Establishing partnerships and engaging PhD students to further develop sustainable building materials using locally grown and manufactured plantation softwood has the real potential to further support regional economic development for the Fraser Coast.” Mr Stringer said. “For example, Ms Cherry previously worked with Hyne Timber at our Glue Laminated Timber plant in North Maryborough to support our locally manufactured timber bridge solution, which was made from locally grown plantation pine. “This bridge, an innovation itself, was successfully and quickly

Ŷ Rebecca Cherry.

installed in the Tuan Forest and presents a sustainable, prefabricated option as part of the Federal Government’s bridge replacement program, especially for smaller, regionally located bridge projects where access for heavy lifting equipment is restricted.” Mr Stringer said.

SCANNING

Ŷ Proud of a 20-year success story: Luxscan Managing Directors Raphaël Vogrig (right) and Jean-Philippe Hildebrand in front of the CombiScan

Weinig Luxscan celebrates 20 years of innovative scanner technology

uxscan Technologies Sàrl, the leading specialist for automated timber optimizing, is celebrating its 20th anniversary. Originating from a small start-up, the company has grown continuously since 1998. Today, Luxscan has a scanner program for all performance requirements and all investment volumes. This also includes systems for strength grading. An anniversary event took place among the staff and invited guests. Among them were Weinig CEO Wolfgang Pöschl and CFO Gerald 10

Schmidt. Their special congratulations went to Luxscan Managing Director Raphaël Vogrig, who founded the company and played a decisive role in its success. Raphaël Vogrig and Jean-Philippe Hildebrand have held dual leadership positions at Luxscan for several years. The two managing directors took the opportunity to thank the employees for their great commitment. Supported by the commitment of the team, the company looks at a strong track record after 20 years of market presence: By the end

of 2018, Luxscan will have sold 400 scanners for use in a total of 36 countries. A video reviewed the steep development of the company: Already with the ﬁrst scanner sale to New Zealand, Luxscan gained an international foothold. Soon installations followed in Germany and other European countries such as Hungary and Austria. Encouraged by good sales ﬁgures in Canada and the USA, they decided in 2005 to found Luxscan Inc. and established their own company presence in North America, currently the

most important market for the scanner specialist. In 2007 Luxscan became a member of the Weinig Group, the leading technology provider in solid wood and panel processing. This step accelerated the further expansion. Initially, the company focused on scanners for the recognition of various wood characteristics during cross-cutting. In 2008 the ﬁrst rip scanner was introduced. With the completely redesigned CombiScan+ Luxscan set a particularly remarkable milestone at LIGNA 2009. The advanced technol-

AUSTRALASIAN TIMBER November 2018

ogy made it possible to detect defects even more precisely, to take more criteria into account and also to grade them according to defined qualities. Due to its high performance and good integration into cutting systems, the CombiScan+ had a significant influence on market penetration. The EasyScan finally meant the successful expansion of the portfolio to the entry-level segment in 2012. The enhanced EasyScan+ model set standards also in the medium range from 2015. Luxscan was now in the position to cover

requirements on every level. This brought a further growth spurt: “Thanks to our comprehensive portfolio, we have achieved a signiﬁcant increase in sales in the last two years,” says a delighted JeanPhilippe Hildebrand. Meanwhile Luxscan employs more than 50 people. Special attention is paid to innovation and customer orientation. Accordingly, the R&D department is one of the two largest teams. The service is most strongly positioned, with 18 people in eleven languages taking care of customers’ concerns.

www.timberbiz.com.au

NEWS

Ŷ Hyne Timber CEO Jon Kleinschmidt, MP Bruce Saunders and Fraser Coast Mayor, George Seymour with softwood beams.

Major expansion of GLT capabilities

yne Timber has announced a signiﬁcant expansion to its Glue Laminated Timber (GLT) manufacturing capability in Maryborough, Queensland. Already a signiﬁcant manufacturer of GLT in addition to softwood timber products, this expansion investment with the support of a Queensland Government Jobs and Regional Growth Fund will launch the company into a globally competitive product offer. The new state-of-theart manufacturing plant will accompany the existing plant in Maryborough’s Industrial Estate which is now in its 40th year of production. This announcement comes as engineered timber manufactured from plantation softwood is increasingly preferred for larger scale

commercial and residential construction projects due to its superior sustainability and environmental credentials. During the announcement with local MP, Bruce Saunders, Hyne Timber’s CEO, Jon Kleinschmidt said investment to increase manufacturing capability has never been more timely, “Increased GLT manufacturing capability has been on our horizon for a number of years and a Queensland Government grant has accelerated this investment. “We have been experiencing an increase in demand for GLT products so this new capability can increase volumes, improve speed of delivery while broadening our product capability to capitalise on new growth opportunities for the timber industry. “GLT is the talk of

the design and construction industry, but a lack of competitive Australian supply options has prevented many projects from using it. “Increased capability here in Australia will be a game changer for the construction sector and a very positive area of growth for Maryborough.” Mr Kleinschmidt said. Construction of the new plant is expected to commence within a matter of weeks. This is one of the most signiﬁcant milestones in the history of Hyne Timber, which itself dates back to 1882. Recruitment of a range of specialist roles will commence well ahead of plant commissioning, with more operational and specialist jobs created as production scales up. The announcement also presents research

and development opportunities for new, innovative products and solutions which wouldn’t have otherwise been commercially viable. A comprehensive research and development initiative is also underway with the support of research partner, the University of Queensland Centre for Future Timber Structures. The Centre’s Director, Professor Kitipornchai welcomed the announcement stating that the Centre prides itself in supporting industry by ensuring the engineers and architects of our future are educated, skilled and qualiﬁed in timber designs, innovation and solutions. “Timber brings a wealth of creative options to deliver naturally built environments and we welcome any announcements and news that industry and gov-

ernment are working together to improve the supply and capability of the future. “Hyne Timber is one of the leading timber manufacturers, including engineered timber, in Australia and is well placed to strategically drive change within the design and construction industry provided there is conﬁdence in supply.” Professor Kitipornchai concluded. Businesses in the region have also thrown their support behind the announcement including Managing Director of iconic freight supplier, Graham Richers of Richers Transport. In a statement of support, Mr Richers said having been Hyne Timber’s principle freight supplier for over 30 years, any opportunities to accelerate the required growth for a sustainable future is

critical, not just for Hyne Timber, but for its suppliers, “Accelerating growth and creating jobs is exactly what the Queensland Government Jobs and Regional Growth Fund is trying to achieve and I’m delighted to hear Hyne Timber have been successful in securing support to do exactly that. “Business security, sustainability and growth is a priority for our region. If Hyne Timber grows, the entire local supply chain grows too. “This is excellent news and a major conﬁdence boost to the Maryborough economy.” Mr Richers concluded. Hyne Timber will be releasing progress updates throughout the next few months as the new plant nears commissioning around mid2019.

Appointment ties in with prefab growth plans XLam has expanded its senior management team with the appointment of John Eastwood as Head of Business Development for Australia and New Zealand. XLam is primed for growth following a multimilliondollar investment earlier this year, which enables it to further ramp up delivery of prefabricated buildings. Its CLT plants on either side of the Tasman enable XLam to grow in step with increasing Australian market demand while creating further capacity in New Zealand to accommodate the demand generated by the New Zealand housing shortage and ambitious KiwiBuild initiatives. John says he is excited to be taking on an important business development and leadership role at an

important time for XLam, Australasia’s only manufacturer of CLT. “The new plant in Australia makes XLam a true Australasian business and has necessitated my role – the need for improved productivity and quality in the construction sector is driving demand for offsite manufacturing and the technical expertise and advice that is required to ensure its successful delivery.” John has held country manager and senior commercial management roles with a number of multinational and national building material manufacturers and suppliers to commercial and residential construction sectors. He is experienced in strategy articulation, operational implementation, and leadership of rapid

AUSTRALASIAN TIMBER November 2018

growth and diversification initiatives and acquisition and merger integrations. He holds a Bachelor’s degree in Architecture from Unitec and is a member of the New Zealand Institute of Directors. XLam CEO Gary Caulfield says the company is fortunate to have Mr Eastwood in a top role. “John has become familiar with XLam from the inside over the past seven months, and we are pleased to have him now in one of the most important roles in the business. There are few people who can match John for depth of experience and knowledge of the construction, manufacturing and building materials industries, and our clients – and future clients – will benefit enormously from his expertise.”

www.timberbiz.com.au

Fast, efﬁcient timber coating machinery. PERFECT FOR PRIMING AND PRE-OILING

Range of small and large models

Easy cleaning and maintenance

Machine coating capacity can range from 1500 to 9000 lineal metres per hour depending on model

Rotating brush application for consistent coverage

Imported direct from Denmark

Use for oil OR water based timber oils, stains and paints

Ceetec timber coating machinery is proudly distributed in Australia and New Zealand by Intergrain Timber Finishes. For more information on Ceetec equipment solutions, contact 1800 630 285.

NEW CUTTING CONCEPT

Ŷ Automatically efﬁcient. Manually versatile. Incredibly ﬂexible. The new saw concept using robots

Ŷ Flexible and powerful: intelliDivide – the optimization "software as a service."

Homag setting trends at Treff in Holzbronn

xperts in panel dividing technology are celebrating the world premiere of a new cutting concept at this year’s HOMAG Treff, taking place at the company’s Holzbronn site. With the help of a built-in robot, two new saws will combine autonomous batch size 1 production with the high flexibility of manual cutting. HOMAG is also exhibiting various production concepts in Holzbronn that make modern and flexible work in any joinery an exciting experience SAWTEQ B-300 flexTec and SAWTEQ B-400 flexTec WORLD PREMIERE: Two robot saws for maximum versatility Automatically efficient. Manually versatile. Incredibly flexible. These three statements perfectly express the strengths of the new HOMAG SAWTEQ B300 flexTec and SAWTEQ B400 flexTec saws. The brand-new saw concept using robots is making its world premiere at HOMAG Treff in Holzbronn. Interested parties and customers of HOMAG saws have a lot to look forward to. Autonomous batch size 1 production Both process innovations are automatically efficient during autono14

mous batch size 1 production, as both saws use industrial robots for single-panel cutting – meaning no human intervention is required in sections. The key to this system is highly intelligent stack formation when destacking onto lifting tables. The algorithms of the software used to achieve this have already been tried and tested using the batch size 1 cutting cell SAWTEQ B320 flexTec. Tried-and-tested saw technology Unlike the cutting cell, which was developed specifically for automated batch size 1 cutting processes, the SAWTEQ B-300 flexTec and SAWTEQ B400 flexTec saws can be operated manually if required. This may be advantageous for applications such as cutting books, dividing thin panels or for special functions such as adding multiple grooves to a panel. The two new saws are incredibly versatile as a result. It’s also useful to know that the design and features of the basic models of the new saws are largely the same as the SAWTEQ B-300 and the SAWTEQ B-400, even retaining the same level of reliability offered by these panel dividing classics. Demand-based solutions

The two new saws offer an outstanding level of ﬂexibility thanks to the combination of optimum robot performance and manual operating freedom for cutting processes. There are countless designs available in a range that includes a wide variety of feed and stacking options as well as numerous optional features.

The Benefits In robot mode: Highly efficient batch size 1 production with up to 800 parts per shift Low unit costs per part No operating personnel required In manual mode: Full freedom when handling cutting tasks Maximum flexibility Excellent for cutting packages or dividing thin panels Image: Automatically efficient. Manually versatile. Incredibly flexible. The new saw concept using robots intelliDivide — the optimization “software as a service” Optimization software can be a key element for a company wishing to compete successfully in the woodworking market. And no wonder, since intelligently optimized cutting patterns save significant time, reduce the amount of material and resourc-

es used, and ensure efﬁcient processes. This can now be achieved in a process that is more agile and automated than ever thanks to intelliDivide – the optimization “software as a service.” As many customers can tell you from their own experience, when it comes to cutting patterns, one or two hours of costly work preparation time can be spent manipulating or correcting optimization results over the course of a day. Thanks to intelliDivide, this time can be reclaimed for tasks that add value, as this preparation time is no longer necessary. How can that be, you might ask? intelliDivide is cloud-based optimization software that forms part of the tapio eco system and can be use directly via the Internet. All that customers require is Internet access – there is no special hardware or software that has to be installed locally. intelliDivide is ﬂexible and powerful Simply upload the cutting data and intelliDivide automatically begins the optimization process, calculates several alternatives at the same time, and presents them as options for selection in the shortest time possible.

AUSTRALASIAN TIMBER November 2018

It doesn’t matter if the customer is focusing on reducing waste, achieving the shortest machining times or optimizing handling: They merely have to select their preferred optimization result, download the data, and begin the cutting process. “This works because intelliDivide even takes over the machine conﬁguration automatically if the saw is tapioready and connected to tapio,” explains Arne Mömesheim, Product Manager at HOMAG Plattenaufteiltechnik GmbH, adding: “Our new range of HOMAG saws are tapio-ready as soon as they leave the factory.” Ideal for customers from trade and industry Both trade and industry are set to beneﬁt from these new possibilities. Small and medium-sized businesses can sharpen their competitive edge with this innovative optimization solution, as they can now receive excellent optimization results for cutting without investment, update, and maintenance costs. In addition, the cost of using intelliDivide can be calculated with precision and displayed for comparison in a clear format. Charges depend on usage and are based either on yearly or monthly contracts. intel-

liDivide can also lead to a noticeable increase in added value for manufacturing companies with considerably large optimization volumes. This is due to the fact that this cloud-based optimization software uses higher computing capacity than any ofﬂine solution, and can also provide users with a calculation of the cutting time using real usage data in addition to the numerous optimization options.

The Beneﬁts The user does not require any local hardware or software. intelliDivide works independently of the operating system and on any mobile or stationary device with Internet access Users do not have to worry about maintenance or updates intelliDivide automatically calculates several alternatives at the same time Comparing the optimization results is quick and easy The costs for intelliDivide are dependent on usage and be calculated with precision More information: www.tapio.one New ideas for every type of production Flexible workshop concepts At Treff, HOMAG is presenting three produc-

www.timberbiz.com.au

NEW CUTTING CONCEPT tion concepts – from small to large, from simply networked to digitized, from manual machine operation to automation solutions. How can companies expand their production? How does networking work? HOMAG has combined machines for different concepts. Visitors to Treff will discover new ideas for even more modern and flexible working – from trade to industry. Concept 1: Workshop for small businesses The simplest entry level for efficient production: this covers nearly all production steps for interior fitters. The machines: SAWTEQ B-130: Small entry-level saw for efficient cutting, barely any different in price when compared to a sliding table saw (check out our promotion: currently with module45 bevel cut unit at a discount) EDGETEQ S-240: Entry-level machine for edge banding with initial automation of units CENTATEQ P-110: CNC processing center for routing and drilling with free access on all sides (including 5-axis technology)

Concept 2: Flexible workshop with automated workpiece handling With this concept, companies take the first step into partially unmanned production. The integrated saw is equipped with a robot, which operates the automatic destacking. The result: high performance with low personnel requirements. The machines: NEW! SAWTEQ B-300 flexTec: Single saw with lifting table and the option to continue production unmanned for long periods through the use of robots. The brand-new saw concept using robots is making its world premiere at HOMAG Treff in Holzbronn. EDGETEQ S-380 profiLine: Edge banding machine with return and full automation DRILLTEQ V-500: Vertical processing center with routing unit for Clamex connections and return system (compact handling concept on 25 m², provides a performance boost of 15%) Concept 3: Workshop with fully automated individual machines This workshop takes you even deeper into the world of “automa-

tion.” For example, it is possible to directly interlink the SAWTEQ B-320 flexTec with the edge banding machine. Parts that do not require edging can be destacked automatically. Production can be operated unmanned over a longer period, because where there is direct interlinking, no stack positions need to be emptied. In short: This is an industrial solution for batch size 1 production for requirements of any kind (including profile parts), which works with minimal personnel involvement. The machines: SAWTEQ B-320 flexTec: Panel dividing saw with outfeed roller conveyor, two stacking stations and automated parts labeling SAWTEQ B-300: Fully equipped saw for maximum output CENTATEQ N-500: Nesting machine with roller conveyor STORETEQ S-200: The above machines are networked with this intelligent horizontal storage system (with flexible universal suction rail ST71). This ensures maximum flexibility from the storage system DRILLTEQ D-500: CNC drilling and dowel

driving machine with intelliGuide operator assistance system At Treff, HOMAG is also exhibiting two further concepts in higher performance classes. Further information can be found at: www. homag.com/treff Concept 4: The “autonomous cell” (flexibly networked individual machines with TRANSBOT) Can be seen in Schopfloch Concept 5: Fully automated furniture production for China Can be seen in the new production hall in Horb am Neckar (near HOMAG Treff in Schopfloch) PARTS LABELING All concepts have one thing in common: integrated parts labeling. This part identification allows every part to be assigned in a clear manner during ongoing operation. Moreover, it enables easy reproduction in the case of reject parts. The SAWTEQ B-200 saw brings power to the trade First appearing at HOLZ-HANDWERK 2018, this lifting-table saw is continuing to bring power to the trade at HOMAG Treff in

Holzbronn. The compact saw supplements the existing 2 series from HOMAG, which previously consisted solely of a saw without a lifting table. The technical highlights: In both versions, the machines have a saw blade projection of 60 mm – with higher projection available as an option. However, thanks to its integrated lifting table, the saw’s technology is capable of substantially higher throughput. It can be loaded by forklift truck with entire books of panels, which are then automatically pushed onto the rear machine table one at a time to undergo the cutting process. This saves time, improves ergonomics, and accelerates the production process. There is also a range of impressive additional equipment options available, such as the destacking module LITE, which is available for the SAWTEQ B-200. This module is operated using an integrated assistance graphic that uses color coding to clearly and accurately indicate the correct destacking position at all times. Furthermore, anyone who would like

support during cutting can opt for intelliGuide basic. With this option, now available for the SAWTEQ B-200, LED signals at the cutting line show the operator the next work steps on the saw itself. The operator does not have to look at the monitor as often and can work in a smoother process with fewer errors. Another new feature: Instead of the 600 mm wide air cushion tables, the SAWTEQ B-200 can alternatively be equipped with 800 mm wide cushion tables for improved ergonomics when handling large or heavy panels. For an even better performance, the saw can also be equipped with a 95 mm saw blade projection in addition to the existing 60 mm or 80 mm saw blade projection options. intelliGuide professional: The intelligent operator assistance system With the intelliGuide operator assistance system, saws are able to respond to the machine operators and display operating instructions in their immediate ﬁeld of view so that operators no longer need to look at a monitor.

Ŷ HOMAG Plattenaufteiltechnik GmbH

www.timberbiz.com.au

AUSTRALASIAN TIMBER November 2018

ENGINEERED WOOD

Big River Group launches Armourcab New timber cabinetry product in three native species

rmourcab by Big River Group is a smart, new choice for cabinetry and joinery applications requiring durability, stability and impact resistance in a decorative hard or softwood ﬁnish, along with matching edge strip. Building on the success of the company’s Armourpanel product, renown as Australia’s strongest cosmetic plywood for ﬂooring, ceiling and wall lining applications, Armourcab enables architects and

builders to create cabinetry and joinery products in the same timber. “We were consistently seeing our customers want to create joinery items from our Armourpanel due to its beautiful and unique look, but given its distinct strength is not an easy thing to do. So we decided to create the cabinetry version – Armourcab,” explained Jim Bindon, Managing Director of Big River Group. “The end result is a stunning yet practical choice for appear-

ance grade cabinetry and joinery applications in both residential and commercial projects.” Like Armourpanel, the new timber is proven to tolerate extremes of heat and humidity, and resist shrinkage while maintaining a high-quality aesthetic. Armourcab is available in a three native timber species – blackbutt and spotted gum for hardwood applications, or hoop pine for softwood following the launch of the distributor’s own range of hoop

pine product earlier this year. Being natural timber, every panel exhibits variations in colour and texture and ensures that every installation is unique. The panels are manufactured in Big River’s Grafton facility and are supplied uncoated for custom ﬁnishing. They are engineered from a 16mm moisture resistant MDF (MRMDF) core with a 1.0mm timber face bonded to each side to form a strong, solid and stable panel that is easy to work

with. It is available in a range of standard panel sizes at 2400x1200mm, 2400 x 600mm, 2000 x 1200mm, 1800 x 1200mm, and 1200 x 1200mm. Big River Group Armourcab is available through the company’s nationwide distribution network across 13 of the major populous areas of Australia, including Sydney, Gold Coast, Brisbane, Sunshine Coast, Townsville, Illawarra, Melbourne, Hume (ACT), Adelaide and Perth.

About Big River Group Big River Group manufactures and distributes timber and steel formwork products, timber flooring, structural plywood and related timber products, and distributes a broad range of other building products, including MaxiWall, primarily to the commercial and residential, non residential and infrastructure construction market segments. Big River owns and manages 13 sales and distribution outlets including Sydney, Gold Coast, Brisbane,

“With an operating history of over 100 years, Big River Group has established itself as one of Australia’s leading manufacturers and distributors of timber and building products. This ongoing achievement is a clear reﬂection of our longstanding presence in the marketplace, strong service culture and technical expertise,” Bindon concluded. For more information visit www.bigrivergroup. com.au/armourcab

Sunshine Coast, Townsville, Illawarra, Melbourne, Hume (ACT), Adelaide and Perth. The Company also owns and operates manufacturing facilities at Grafton and Wagga Wagga in NSW. Big River provides customers with the security of a full support network, and technical expertise at every stage of the product lifecycle. This is the guarantee of quality and service that Big River has based its 110 years of success on.

Ŷ Images by RITZ&GHOUGASSIAN

AUSTRALASIAN TIMBER November 2018

www.timberbiz.com.au

Automated grading: refined The new Goldeneye 800 ॑ Multi-View X-ray technology inside ॑ Pith detection ॑ Knot displacement

The fastest and most advanced lumber scanner. Microtec’s Goldeneye 800 features three X-ray sources for precise pith detection and knot size calculation at feed speeds of up to 1,200 meters per minute (4000 ft/min).

This Multi-Sensor Quality Scanner maximizes recovery for high-speed planer mills and manufacturers of construction lumber and high-speed applications. New Microtec Multi-View ? YH` [LJOUVSVN` PKLU[PÄLZ PU[LYUHS wood defects, pith and accurately

determines the knot displacement size inside lumber. ;OPZ HSSV^Z MVY \S[YH ÄUL ZWSP[ KL[LJ[PVU and unprecedented levels of accuracy in automated grading according to local standards. microtec.eu/Goldeneye800

Meet Microtec at WoodTECH 2018 in Melbourne, Australia and Rotorua, New Zealand www.timberbiz.com.au

microtec.eu

AUSTRALASIAN TIMBER November 2018

ENGINEERED WOOD RW makes a mark at Timber Queensland ‘Engineered Wood Products’ seminar Glue Laminated Timber (GLT), Cross Laminated Timber (CLT) and Laminated Veneer Lumber (LVL) were in the spotlight as the movers and shakers in the Queensland timber industry converged on Brisbane to discuss the evolving trends in the engineered timber industry. “Responsible Wood members Hyne Timber and Wesbeam showcased their use of GLT and LVL in servicing a growing number of client wants and needs. Indeed, on the back of the well-publicised Lend Lease CLT project (25 King Street Brisbane) chatter is now growing among engineers, architects and specifiers to use engineered timber more and more in commercial building projects,” said recently appointed RW marketing and communications officer Jason Ross. Highlighting the ‘Maryborough Fire Station’ Proposal, Hyne Timber Strategic Relations Manager and Responsible Wood Director Katie Fowden spoke about the added benefits of GLT including the company’s innovative development of BIM (Building Information Management) content. “While the majority of large scale, commercial

engineered timber projects have imported their timber from overseas, Hyne Timber, Wesbeam and Xlam are all trailblazers in Australian production; sourcing their timber from certified, Australian forests,” said Jason. “For these businesses ‘chain of custody’ is king. Underpinning the benefits of Responsible Wood Certification Wesbeam Senior Structural Engineer Stephen Dayus suggested that ‘it all starts in the forest’ with great importance placed on maintaining strong forestry standards in order to preserve future timber supply; the ultimate renewable resource.” Responsible Wood is an Australian not-for-profit organisation that promotes sustainable forest management through the development of standards for forests and the products that come from them. These standards are accredited by Standards Australia and include 4708 (Forest Management) and 4707 (Chain of Custody). The Responsible Wood logo bears a commitment to both Australian made and environmental sustainability through forest management, product and distribution of Responsible Wood member’s engineered timber products.

Ŷ Jason Ross.

Hyne Timber put its heart and soul into GLT campaign

hen Hyne Timber released its new Glue Laminated Timber (GLT) campaign earlier this year it wasn’t exactly what you’d expect from an Australian softwood processor. Playing on the love story Hyne Timber has with Australian pine, and with a focus on building relationships at every stage of the design and construction journey, the new campaign featured plenty of cheeky puns and innuendo… and it certainly got to the heart of discerning clients!

It’s all part of Hyne Timber’s service-based marketing strategy which sees the company working closely with both the specification and construction supply chains. “We’re really happy with this playful approach and hope it will inspire product specifiers to rekindle their passion with GLT,” said Jeremy Mead, Hyne Timber’s National Sales and Marketing Manager. “The aim was to find the fun angle in a time when complex issues like non-compliance, increased regulation and ambitious sustainability

goals are increasingly becoming key motivators in our industry. It’s a crucial step in driving engagement and interest in very complex topics.

“Crucial step in driving engagement and interest in very complex topics” “It complements our T3 Green Plus video campaign in its effort to differentiate Hyne Timber, while motivating the building trades to get more familiar with the products they’re using.

Ŷ Ashleigh Muller, Jeremy Mead and Liliane Kao from the Hyne Timber Marketing Team.

“It’s a theory we’ve borrowed from the edutainment industry, and has seen us develop unbelievably strong engagement and interest.”

Taking a quick look at Hyne’s new brochure, the clever marketing of the “love” theme gets the GLT message across like never before … + It’s the story of innate beauty, enduring

connections and a natural strength that spans great distances. + It’s the story of bold looks, inﬁnite possibilities and “happily ever after”. + When timber sections are meticulously selected, lovingly arranged and glued together with extreme precision, a bond like no other is formed. + Technology sparks many modern romances. This one is no different. + Chosen for its natural aesthetic and structural properties, our timber is being used in

extraordinary ways. It just goes to show that with love, all things are possible. + At the heart of every great relationship is communication. At Hyne Timber, we work hand-in-hand with you through the design, engineering and construction journey. + This isn’t the end of the story. It’s just the beginning! The whole thing is a breath of fresh air, especially when, generally speaking, much focus these days is on bad news.

Ŷ Hyne Timber CNC automated joinery capability.

AUSTRALASIAN TIMBER November 2018

www.timberbiz.com.au

NEW PRODUCTS

Machine profile – the new Hundegger K2 Industry

Tough induction proved that the designers had built a truly new generation machine

very once in a while, a machine is developed that becomes synonymous with its intended purpose. The Hundegger K2 is such a machine. From its LIGNA launch back in 1999 until the latest generation today it has been the workhorse of the Glulam industry. Welcome to the next level of Mass Timber processing – the K2 Industry. This is a considerable update on the previous Hundegger K2i machine (of which three examples are in operation in Australia and New Zealand) with the main intention to increase productivity by 20% -

meeting the growing application for Glulam, LVL and CLT processing. “Whilst the working concept remains largely unchanged, there are some key factors that have lifted the machine to a level ideal for multishift operation and serious production,” said Sam Rowe, General Manager, Hundegger Australasia. “The addition of the 6-axis Robot unit into the machine is also a recent change that gives the high-speed production operation a bespoke ability to allow for unmatched ﬂexibility in design of components. Sam said many com-

www.timberbiz.com.au

ponents were re-designed for continuous operation, new functions controlled by Servo motor, new milling units, heavier machine frame and positioning devices and ability to handle up to 450mm in height and 1300mm in width is opening new doors for this impressive machine. With a well-established market in Europe, the Hundegger K2 is becoming a machine of solid interest in this part of the world also. And a solid machine it is too – with a recent speciﬁcation weighing in at 37 tonnes! “To fully test the new K2 Industry, the ﬁrst machine of this new

generation was built and after our own rigorous in-house testing, was installed at a well-known CLT manufacturer in Austria and put straight into multiple shift operation. This industry tough induction proved that the designers at Hundegger had built a truly new generation machine,” he said. Key design upgrades were upgraded to deliver beneﬁts across several levels: General capability High quality machine components Elimination of known weak points Faster calculation processes 450mm Z-axis capa-

AUSTRALASIAN TIMBER November 2018

bility on some elements Cutting efﬁciency High performance motor spindles up to 35kW Higher performance tools enabled with power and speed Different processing units at ﬂexible dedicated stations Material Handling Pre-positioning with servo control Positioning devices faster with heavier elements User-oriented processes and bespoke operation Simultaneous processing from both sides “The result is a machine that can handle hardwoods or soft-

woods, in workpiece capacity of 300mm high x widths up to 450mm, 650mm or 1300mm. Special reinforced and redesigned work-piece turners allow special processing on material up to 450mm x 450mm. Material length can be as long as you like – commonly 12m, 18m or more. For beams, panels, in Glulam, CLT, DLT, LVL – the possibilities are endless,” Sam said. Equipped with the Hundegger CAMBIUM software, jobs can be imported from practically any CAD source and processed with ease on the Hundegger K2 Industry.

SAWMILLS PROFILE

Ŷ Right to left: Graeme, Lindsay and Lachlan Robertson, three generations of Robertson Bros Sawmills. Photos courtesy Graeme Robertson

Ŷ Graeme Robertson standing in front of one man bench

Despite changes in wood supply Gympie mill retains its iconic status By Keith Smiley

ympie is a resilient town, made up of determined and hardy souls who have weathered drought, ﬁre and ﬂoods over its 150 year existence. Built on gold fortunes, timber became its mainstay through these rugged times. The Robertson brothers saw an opportunity and turned their hand from being builders to becoming a major sawmill employer. Graeme, son of Lindsay Robertson, looks back on a legacy hewn

out of South Eastern Queensland forests, aware of his own part in the family business, now in its third generation with grandson, Lachlan engaged in daily operations. Keith and Lindsay Robertson have been lauded by their peers for their valuable contribution in Gympie and the Sunshine Coast, honoured by the Master Builders Association, as Life Members. Some of their projects included the Gympie Showgrounds, Noosa Courthouse and a hospital in

Hervey Bay. “You get left behind if you don’t move forward,” says Graeme, who runs the sawmill, using a dry mill with a capacity of 280 mil. With six kilns ranging from 40-60 cubic metres per kiln, they can achieve an air and solar dry to 11% moisture content. They upgraded their green mill in Gympie, changed their system to one man benches, purchasing new carriages, control systems, and refurbishing other machinery. “Our market is join-

ery, ﬂooring and decking, with our main focus on the dry product. We want to value add; but markets are changing and there is more competition from overseas,” Graeme acknowledged. “We are seeing the changes in wood where 50% is private and ﬁfty percent is from Crown. Most of our hardwood comes from the Maryborough region, Gympie and Cowan Cowan. But we’ve seen a lot of private wood moving offshore instead of us being able to buy the wood.” Graeme is a polite,

Ŷ Graeme Robertson standing in front of one man bench in operation

AUSTRALASIAN TIMBER November 2018

quietly spoken, positive man, and proud of his family’s achievements. With four sons of his own, and his father being one of seven, family is at the heart. They employ around forty staff, ably supporting the local township, while continuing to grow the business. Their Brooweena sawmill closed down a few years ago due to workplace, health and safety restrictions. Re-tooling would have been prohibitive but Graeme still hopes one day to refurbish the Brooweena mill, upgrading it to a one-

man bench. The mill was established over 90 years ago, and burned down in the late eighties, later rebuilt from scratch. Graeme says his wife will ‘pull him into retirement in seven years if he tries to hang on’. Graeme and his South African born wife caught the Queen Mary to New York from London and plan to cross more of the savannah in the vast animal parks in southern Africa; when he is not scuba diving off the Queensland coast.

Ŷ Graeme Robertson amid his thriving sawmill enterprise “Taking it to task and doing the best you can”.

www.timberbiz.com.au

WE’RE AUSTRALIAN MADE Vekta Automation is a dynamic and innovative Australian owned and operated company. Our machinery is Australian made!

SPARE PARTS Over half a million dollars in spare parts and consumables are stocked in Australia and New Zealand. Parts are dispatched on the same day and tracked ensuring your downtime is as minimal as possible!

The Razer offered us everything we needed... Most importantly, it’s Australian made and engineered with much better support than the imported products we’ve tried in the past. The saw was delivered ahead of time, and the training support and communication with Vekta have exceeded all our expectations. Mark Footer, Footersville Structural Timber Solutions

www.timberbiz.com.au

AUSTRALASIAN TIMBER November 2018

HELP IS AT HAND Australian made means that you receive technical support from the actual engineers of the machinery – not just a sales representative. All Engineers are vigorously trained in all parts of Vekta’s machinery from knowing the placement of each bolt right through to the intricate software.

VEKTA RESCUE Vekta Rescue, our online help system gives you step by step instructions on how to solve problems immediately. This site is constantly being updated – you always have the latest information VISIT US right at your fingertips! ONLINE

vekta.com.au

SAWS Accurate Group announced as exclusive distributor Of AceCo Precision Tools In Australia and New Zealand AceCo Precision Tools and the Accurate Group have entered into a long-term agreement whereby Accurate will act as the sole distribution agent for AceCo’s precision wood tooling in Australia and New Zealand. AceCo will work closely with the Accurate team to offer worldclass technical assistance, replacement tooling, custom tooling and select consumables for production. AceCo tooling, particularly in the finger jointing sector, is currently being used in many of the highly regarded mills in Australia and New Zealand. The Accurate Group specializes in a wide variety of tooling and consumable products for the solid timber industry, covering a large range of industry applications. Craig Honeyman, Managing Director of the Accurate Group, says, “We source products from the very best manufacturers around the world to bring the highest quality items for every job appli-

cawtion. We have been working with AceCo for some years in Australia and are familiar with their offerings. AceCo delivers a high quality, long lasting product that reduces maintenance downtime and unnecessary investment in replacement tooling.” A recent Stirling Machinery (part of Accurate Group) finger jointer installation at Ironwood Australia was fitted with AceCo heads. Established in 1959, AceCo is dedicated to manufacturing the highest quality precision tools for the wood industry. AceCo Precision Tools are being used in 35 countries- suppling tooling for the green mill (primary) and dry mill (secondary) sector. AceCo builds planer heads, L and LV type side heads, moulder heads as well as finger joint tooling and cutters. Custom offerings include shear cut moulder heads, hydraulic cartridges and saw collars and HSK tooling.

The Solid Timber Experts MACHINES | TOOLING | TRAINING | ONE GROUP

How to ensure your choice of Linear Saw is a ‘cut’ above the rest

utomating your truss and frame plant is an investment in your business and the future. Today, the Australasian market has a number of linear saw suppliers claiming their automation will improve safety and increase plant efﬁciency. As a consumer, how can you capitalise on this choice? Simpleask questions and put the onus onto the machinery supplier to provide correct, truthful answers that can be demonstrated. Here are some questions to guide your decision-making process:

Floor space is valuablecan I configure a system to suit my factory? Here’s my available space- how should I use it? These questions are vital. You need to ensure your equipment supplier has an in-depth understanding of your space requirement and its use. Your linear saw needs to IMPROVE your workflow, not just fit into your factory. Put the onus onto your supplier to make sure the equipment is configured to your needs- not the other way around. Material flow, size, location of waste bins, dust extraction- all should suit your factory and manufacturing process.

How can optimisation be structured to work with my existing operations?

accurateaustralia.com

stirlingmachinery.com.au

Optimisation of members to reduce waste and cost is a key feature of all automated sawing systems. To beneﬁt from optimisation it’s imperative your lin-

AUSTRALASIAN TIMBER November 2018

ear saw is set-up by a competent, experienced Engineer who understands the unique needs of your manufacturing processes. Would your production be improved by combining members together on a truss-bytruss basis only? Or by combining a few trusses together? Perhaps it’s by optimising like members together– in a batch cutting operation? There isn’t a one-size-ﬁts-all approach to optimising and systems must be tailored to the unique needs of each plant. You should have full control of how the optimising works and the outcomes. Minimising waste and cost is important but these need to be achieved while directly matching your production processes. A poor cutting order can negate savings in timbermake sure your supplier has the knowledge and ﬂexibility necessary to do the job properly.

What should my yearly maintenance budget be? Who can maintain the saw? How quickly can I get spare parts and consumables? When you invest in a linear saw, it becomes the cornerstone of your factory. If your saw stops, the entire factory stops. So, make sure you understand the options for maintaining, servicing and repairing your equipment. Where are replacement parts held? Are they all in stock? How long will they take to get to you? What happens if something odd fails? Who can repair the equipment? What tools and training are available for staff or local contractors so they can

complete services and repairs? Are online resources available? What does the support network look like? Is remote support available? Ask how much on average customers spend on support and maintenance as there can be a very big difference between suppliers- a factor often overlooked. Ongoing maintenance and support is critical. Make sure you have as much control over your own circumstances as possible and then ensure that when you need help from the supplier, you know the costs and time availability.

What skill level do my operators need? The answer to this question lies in the software of the machinery. A simple user-friendly program that can be controlled from various platforms and is designed for basic operator use, are key factors. It’s important your provider regularly updates their software allowing your machine access to new, innovative features- ensuring your investment keeps you at the leading edge. If you’re looking at buying a linear saw- you need to ask the questions and more importantly, COMPARE the answers is it an investment if you make the wrong choice? You want to ensure your deﬁnition of investment reads- a thing worth buying because it IS proﬁtable AND useful NOW and into the FUTURE!

At Vekta we are conﬁdent with what we do - Why not make Vekta your ﬁrst point of comparison?

www.timberbiz.com.au

Wood Protection

Engineered Wood Product Additives Protection solutions for engineered wood products against insects and decay.

Engineered wood products are an essential component of the modern construction industry. LVL (Laminated Veneer Lumber) and other innovations such as CLT (Cross Laminated Timber) are opening up new possibilities for large scale wood based construction. Lonza offer a comprehensive range of glue line additive insecticides, preservatives and veneer pre-treatments for protection of engineered wood products.

To learn more about the products and services available in the Asia Pacific region contact us, or visit our website, Australia: +61 3 9339 8915 tanalised.au@lonza.com New Zealand: +64 9 276 3646 tanalised.nz@lonza.com Website: www.lonzawoodprotection.com/apac Azotek, Permatek and Glusect are registered trademarks of Lonza or its subsidiaries. ÂŠ Lonza 2018

www.timberbiz.com.au

AUSTRALASIAN TIMBER November 2018

TIMBER PRESERVATION

Micropro Wood Treatment Technology has received Global Greentag GreenRate Level A Product Certification announced by Koppers Performance Chemicals.

icroPro® Wood Treatment Technology has received a Global GreenTag GreenRate™ Level A award under Version 4.0 of the Global GreenTag International Product Certification Standard. It is the highest-level achievement for a product under Global GreenTag’s GreenRate™ product rating system – declared by the certification body as ‘Fit-for-Purpose’ and confirmed for Green Building compliance. GreenRate™ Level A equals to a Sustainability Factor of 100 percent under the Australian and New Zealand Green Building Councils’ Green Star™ ‹De24

sign and As Built v1.2› and ‹Interiors v1.2› Rating Tools Credits. “It is a very good result,” said David Baggs, CEO and Program Director of Global GreenTag International. “Koppers Performance Chemicals are to be congratulated as they have designed a very effective and sustainable GreenRate Level A technology.” Elias Akle, General Manager Australian Operations said: “We are very pleased to have achieved Green Tag Certiﬁcation for MicroPro and it is a further conﬁrmation of Koppers commitment to the production of responsible products for the timber and wider building industries.”

To compare the differences between the three levels of GreenRate (A, B and C) the Global GreenTag certiﬁcation systems ranks a Level B product to have a Sustainability Factor of 75 percent and a Level C product, a Sustainability Factor of 50 percent. The Global GreenTag GreenRate™ Level A rating given to MicroPro® Wood Treatment Technology also gives the product relevancies and compliance with Features under the WELL™ Building Standard Equivalencies, including Feature 26: Enhanced Material Safety and Feature 97: Material Transparency. The program is also

recognised by the Green Building Councils of New Zealand and South Africa. In Australia, the GreenRate™ program is also relevant to Infrastructure professionals working with the ‘IS’ rating tool from the Infrastructure Sustainability Council of Australia.

About Global GreenTag International Global GreenTag International Pty Ltd is an internationally recognised, multi-awardwinning Type 1 (Third Party) Ecolabelling, Product Certiﬁcation, Environmental Product Declaration (EPD) and Product health Declaration (PhD) program operator based in Austral-

AUSTRALASIAN TIMBER November 2018

ia, but with ofﬁces and representation also in South Africa, Mainland China, Hong Kong, Taiwan, Malaysia and will be soon launching in the USA. Global GreenTag programs are formally recognised in WELL™, BREEAM International, EarthCheck®, Green Star®, LOTUS® and the Malaysian Government’s MyHIJAU program and compliant with credit requirements in LEED® (PhDs and EPDs), and BREEAM® (EPDs).

About Koppers Koppers, with corporate headquarters in Pittsburgh, Pennsylvania, is an integrated global provider of treated wood products,

wood treatment chemicals and carbon compounds. Our products and services are used in a variety of niche applications in a diverse range of end-markets, including the railroad, specialty chemical, utility, residential lumber, agriculture, aluminum, steel, rubber, and construction industries. Including our joint ventures, we serve our customers through a comprehensive global manufacturing and distribution network, with facilities located in North America, South America, Australasia, China and Europe. For more information, visit www.koppers.com or http://www.kopperspc. com.au/.

www.timberbiz.com.au

MicroPro

The Choice is Yours. Koppers performance chemicals believes in giving our customers access to the best and most environmentally responsible products. That’s why our MicroPro® wood treatment technology has just received Global GreenTag GreenRate Level A product certfication. MicroPro’s unique formulation of micronized components and manufacturing process has seen the product achieve a number of environmental certifications including SCS Environmentally Preferable Product and UL Greenguard Certification and now Global GreenTag GreenRate Level A.

THE CHOICE IS YOURS… GreenRate™ Level A equals to a Sustainability Factor of 100 percent under the Australian and New Zealand Green Building Councils’ Green Star™ ‘Design and As Built v1.2’ and ‘Interiors v1.2’ Rating Tools Credits.

For more information call us now on 1800 088 809. MicroPro® is a registered trademark of Koppers Inc. or its subsidiaries. MicroPro® timber products are produced by independently owned and operated wood preserving facilities. © 2018 Koppers Performance Chemicals Australia Pty Ltd. Global GreenTag and GreenRate are registered trademarks operated under licence by Global GreenTag Pty Ltd. 6&6 LV D UHJLVWHUHG PDUN RI 6FLHQWLÀF &HUWLÀFDWLRQ 6\VWHPV and “GREENGUARD” is a registered mark of GREENGUARD Environmental Institute.

TIMBER PROTECTION

Diverse range of clients utilise lab testing services

ince commencing operations in Australia seven years ago IVS Labs Australia has provided many thousands of compliance reports to AS 1604 for a diverse range of clients, including Timber Treaters, Chemical Suppliers, and unfortunately from time to time from clients seeking answers to why a timber product is failing in service when it should not have failed. IVS Labs operate two labs in Australia with

a backup at company headquarters in Hamilton New Zealand and is able to cover virtually all registered preservatives in common use. All the laboratory operations are managed by Colin Malcolm who has over 30 yearsâ&#x20AC;&#x2122; experience in analytical testing. â&#x20AC;&#x153;Our lab results are sent to our compliance section who independently assess the levels for compliance and issue the compliance report. The area of compliance is a very complex and

challenging area,â&#x20AC;? said Tim Evans, Business Development. â&#x20AC;&#x153;We believe we have made the task of getting samples of preservative treated timber analysed as easy and as economical as possible, and I am pleased to have seen testing numbers show steady growth year on year,â&#x20AC;? says Tim. The IVS testing labs also participate in the industry recognised Global ProďŹ ciency Inter-Lab Comparison Program (ILCP) to

reassure clients that stringent quality systems and processors are maintained and comply with the internationally recognised ISO17025 requirements. As part of the service, IVS offers an online web portal. This is an industry leading tool that enables tracking, reporting and archiving of test results for ongoing evidence of QA. Our Labs offer turnaround times of up to seven working days from date of arrival of the

Quality Timber Testing On time â&#x20AC;&#x201C; every time Prompt turnaround of tested timber samples, combined with accurate reporting, are recognised as critical requirements for timber preservation treatment providers.

BeneďŹ ts of using IVS:

potential reforms that may be required. Please contact the lab for more information. We offer prepaid, pre-addressed satchels to dispatch samples for analysis. â&#x20AC;&#x153;Send in your full contact details so we can get you registered as a Portal User. Future sampling supplies can be ordered on line using the portal. Sampling and Portal user Guide documents are available upon request,â&#x20AC;? he said. t i m . eva n s @ iv s l t d . com.au

â&#x20AC;&#x153;Their commitment to a fast turnaround time and accurate analytical results provides timber treatment companies not only an independent veriďŹ cation of their quality systems, but also the ability to ďŹ ne-tune their preservative treatment options. This saves time, money, minimises wastage, without compromising on the quality and durability of their timber.â&#x20AC;? Jeanette Drysdale Wood Protection Consultant

Get in touch

( (JJ\YH[L [LZ[ YLZ\S[Z VU [PTL L]LY`[PTL ( :WLJPHSPZ[ Âś ^L VUS` [LZ[ [PTILY ( 6USPUL WVY[HS [V LHZPS` Z\ITP[ [YHJR HUK ]PL^ `V\Y [PTILY [LZ[ YLZ\S[Z HUK YLWVY[Z ( 8\HSP[` ZLY]PJL \[PSPZPUN Z[H[L VM [OL HY[ LX\PWTLU[ ( (K]PJL HUK Z\WWVY[ VU OHUK MYVT V\Y [LHT VM [PTILY L_WLY[Z ( :WLJPHSPZ[ RUV^SLKNL VM [PTILY [YLH[TLU[ Z[HUKHYKZ HUK [OLPY PU[LYWYL[H[PVU

samples at the lab. With vast majority being reported within ďŹ ve days. Rates have been pitched at a cost effective level, for users who are in need of a regular lab analysis service, to monitor compliance, meet legal obligations and duty of care in providing a ďŹ t for purpose product that complies with AS 1604. Recent publications from regulators and industry bodies have been made around nonconďŹ rming products and

AUSTRALASIAN TIMBER November 2018

To discuss your requirements in more detail and for further technical information please get in touch: Australia Tim Evans Business Development P 0417 726 741 tim.evans@ivs.com.au www.ivslabs.co.nz

www.timberbiz.com.au

ASSOCIATIONS

Safety … it’s everyone’s business! By Colin Fitzpatrick Chief Executive Ofﬁcer Timber & Building Materials Association (Aust.) Ltd October was National Safe Work Month – a time to consider and commit to the upkeep of strong health and safety standards in Australia’s workplaces. At TABMA, WHS training and education is a key part of our service

offering, and it brings us great joy to view the national successes of the Safe Work Program last month throughout Australia. While the National Safe Work Month has come to an end, we encourage all industry leaders and members to continue to actively contemplate and address issues concerning safety and wellbeing within the workplace. A nation-wide initiative undertaken by Safe Work Australia, the program endeavours each year, to reduce the risk of injury and harm through the promotion of more considered work practices and standards. Since its inception, there has been a steady decline in the rate of work-related fatalities and workers’ compensation claims. Nevertheless, safety incidents can occur at any moment and in any workplace. Appropriate forethought and planning can ensure such incidents don’t result in serious harm, and therefore we recommend all employers, members and employees revise the following

hazards affecting the industry. Common hazards within the timber industry include: Shifting long or heavy timber sheets by hand can cause serious back, shoulder and hernia/stomach injuries. Inadequate machine guarding, and blunt, unprotected saws can cause serious cuts and amputation. Insufficient protection from high noise levels can cause hearing loss. Inadequate or poorly maintained dust extraction systems increase the risk of breathing in wood dust which can lead to lung disease. To optimise human performance, satisfaction and productivity, and mitigate such risk, we advise members to frequently reflect on their WHS systems and standards, remind staff of appropriate safety protocol and ensure protective equipment is accessible and enforced. At the end of the day, a safe workplace is a strong workplace.

Christmas shutdowns: a timber industry employer guide Brian Beecroft Chief Executive Ofﬁcer TTIA

know what you’re thinking, it can’t nearly be Christmas again. You’re still paying off the last credit card statement from the mid-year family ski weekend or, more alarmingly, yet to burn off last year’s Christmas lunch and associated pudding. However, that innocent call from a family member querying where Christmas festivities will take place this year invariably conﬁrms time is running out for 2018. In addition, I hate to point out the obvious, but the older we get, the more we comment on how quick the year has gone! Now that I’ve undoubtedly depressed you, it’s time to win you over and be useful and give you the “heads up” on all you need to know regarding the coming 2018/19 Christmas/ New Year shutdown period.

Whist the traditional timber industry Christmas period shut down isn’t as long, consistent or widespread as it was 20 years ago and beyond, many companies still close down their business over the Christmas/New Year period and send their employees on annual leave. For many timber employers, it makes sense as the building industry that they directly service slows at this time of the year, and clients and suppliers are often closed. For others, the stop start nature of working over the period with the sprinkling of public holidays is impractical. For many employers, it’s an opportune time to perform necessary maintenance of plant and equipment as well as the fact that it coincides with school holidays, and many staff want to spend time with

www.timberbiz.com.au

family and friends. For the record, the public holidays over the Christmas-New Year Period 2018-19 are: Tuesday, 25 December 2018 Boxing Day, 26 December 2018 Tuesday, 1 January 2019 However, SA and Northern Territory celebrate an additional part day public holiday from 7 pm on Christmas Eve, 24 December 2018 and New Year’s Eve, 31 December 2018. Now let’s go to the legal right of a company to enforce the shutdown. This provision is usually contained in the relevant award (i.e. Timber Industry Award), enterprise agreement or in the case of award free employees, the National Employment Standards. In my view, this provision has become increasingly relevant in recent years as legislative provisions have made it harder for companies to direct employees to take annual leave, including those with excessive leave. There is normally a speciﬁc notice requirement to staff required to be given to implement a close down. In the case

of the Timber Industry Award and Clerical & Administrative Awards it is four (4) weeks’ notice. However, reference should be made to the appropriate award or seek assistance from TTIA if in doubt. For instance, where an employee has only commenced work with an employer in November prior to a Christmas close down, the two parties may agree in writing to take annual leave in advance to cover the close down period. Most awards provide a provision that allow an employer to deduct from termination monies any leave in advance given to any employee that has not been accrued should

the person subsequently leave the business. It is worth noting that under the Fair Work Act (s89 (2)), if the period of close down includes any other form of paid leave, such as public holidays, personal/carer’s leave (previously known as sick leave), compassionate leave or community service leave, the employee is NOT taken to be on annual leave (even during the close down!) for the other periods of leave. Similarly, if an employer has allowed an employee to take a period of long service, most long service leave statutes will deem the employee to be on long service leave and NOT

annual leave. In my experience, I believe a well-managed Christmas close down is an important aspect of managing any business and their staff leave obligations. I will leave the Christmas wishes till the next edition as I’m one of those people I mentioned earlier in the article who still feel like the June long weekend just ended, and I’ve not even cleared the credit card bill from the mid-year ski weekend! If you have any queries not dealt with above, please call the TTIA Timber Employer Hotline on (02) 9264 0011.

SUPPORTERS & SPONSORS

For information visit: www.ttia.asn.au

AUSTRALASIAN TIMBER November 2018

ASSOCIATIONS

Ŷ Greg Boulter - Laminated Timber Supplies

Ŷ GLTAA Industry Dinner

Ŷ Robert Svars - Vistek Structural Engineers

Emerging CLT markets and opportunities for traditional GLT By Josh Wallace Managing Director (Vicbeam) Deputy Chairman GLTAA Chairman, Marketing Committee (GLTAA)

he bi-annual GLTAA conference was held in Melbourne on September 13 and 14. The activities for the conference started at the Vicbeam premises in Bayswater and included a manufacturing update from Vicbeam followed by a factory tour and several presentations. Robert Svars, from Vistek Structural Engi-

neers, presented excellently on the topic ‘A perspective on Mass Timber’ focusing on the emerging markets of CLT in Australia and the opportunities for traditional GLT (Glulam). Greg Boulter, from Laminated Timber Supplies, spoke on the theme of timber coatings in relation to GLT sharing technical information particularly

on the Cutek brand and by the end of the year. Chairman of Technical its history and some of The following posi- committee and Brendan the recent architectural tions were spilled and Bell joins Josh Wallace outcomes achieved filled - Tim Goodall on the marketing comcontinues as Chairman, mittee. with GLT and Cutek. For parties interested Ann Sanfey, of Shane Devereux as the TMA/MGA, also Secretary, Josh Wallace in GLTAA membership joined and presented as Vice Chairman, John and involvement, enon the useful initia- Schwabe as Treasurer, quiries can be directed tives and offerings the Craig Kay continues as to the secretary - Shane TMA/MGA can offer to their membership. A sumptuous dinner was enjoyed by all in the evening followed by the technical meeting the following morning. The meeting saw a new design for the GLTAA website as well as a fresh logo approved. Updated content is in the process of being prepared and the new website Ŷ Vicbeam Factory Tour is expected to be live

Deveraux at the email address: shane.devereaux@jowatpacific. com The next GLTAA meeting will be held on March 20 – 21 2019 in Brisbane.

Finish off with the right finish Timber Veneer

Association of Australia

By Peter Llewellyn Technical Representative, Timber Veneer Association of Australia There is a perception that a timber veneered surface is delicate and not able to stand up to wear. However, the wear resistance of veneered furniture and similar items is largely a function of the surface coating. Oils and waxes, when used alone, may be subject to marking by heat and liquid spillage. However, if applied over a polyurethane base they can give a satin sheen to the surface while the polyurethane provides protection. Scandinavian oil, rubbed into a 3-coat base of matt polyurethane, gives a super smooth oil-rubbed finish. The oil is worked in lightly with 400 wet or dry paper, followed by rubbing along the grain with a pad of household steel wool that is thoroughly wet with oil. The surplus is then removed with a soft clean cloth. If this sounds like too much trouble, or the area is

too large for hand finishing, pre-finished veneers are available that come with a cured, hard, durable, clear coating. These coatings are factory-controlled in a way that is difficult to achieve in the workshop, giving consistency across projects. Other advantages of pre-finished veneers are that they are more scratch-resistant than ordinary polished veneers and specifiers can see the final appearance of the veneer before making a selection. Looking at raw veneer does not reveal how it will look with a finish applied. With pre-finished veneers there are savings in time, risk and money plus confidence about how the final product will look. Application of coatings on site or in the workshop must be in accordance with the manufacturer’s in-

AUSTRALASIAN TIMBER November 2018

structions and away from draughts, dust, moisture and other contaminants. It’s also important to remember that both sides of a veneered panel or door must be sealed to provide a ‘balanced’ component. Panels not sealed in this way may bow or cup. Technical notes about the various finishes for timber veneers can be found in the Timber Veneer Association’s manual titled “Veneer”. The manual can be downloaded from the Association’s website at timberveneer.asn.au. Alternatively hard copies of “Veneer” can be obtained free of charge on request to info@timberveneer. asn.au. TVAA: Stonewood. Andrew Wuttke

www.timberbiz.com.au

ASSOCIATIONS

Ŷ Trent Taylor & Trent Bucholz of Multinail with Shelena Serrano of Vekta Automation. Michelle Cutelli Photography

Ŷ Peter Bevington of Oregon ITM.

Ŷ FTMA NZ Founding Director and owner of Wiri Timbers Lance Worthington explaining the process to the FTMA tour group

Ŷ Imagine standing our frames like that in Australia?

Michelle Cutelli Photography

Tractors, Formula One Drivers and Rally Drivers, there is a connection Ŷ L-R: Kersten Gentle, Shelena Serrano & Darina Gassanova (Vekta Automation)

FRAME & TRUSS MANUFACTURERS ASSOCIATION OF AUSTRALIA

By Kersten Gentle Executive Ofﬁcer FTMA Australia

Ŷ Sir John Kirwan presenting at conference.

www.timberbiz.com.au

Michelle Cutelli Photography

hen the Vi c t o r i a n Roof Truss & Wall frame Association wanted to go National, Peter Wines and Phil Ladson travelled over the ditch to see how they did things in New Zealand as they had a

AUSTRALASIAN TIMBER November 2018

strong National Association called FTMA NZ. Lance Worthington of Wiri Timbers was the brains behind the creation of their national Association and he, along with others talked to Peter and Phil about the steps needed to take our

Victorian Association national. FTMA NZ this year celebrates 20 years and for the ﬁrst time in 11 years, they held a National Conference which was extremely well attended. I was honoured to present at this Association and talk to fabricators across the ditch on the ways we both did things and what we could learn from one another. Mike Mostert (CombiLift), Brett Martin (Independent Hardware Group), Darina Gassanova and Ed Serrano Continued on Page 30

ASSOCIATIONS FRAME & TRUSS MANUFACTURERS ASSOCIATION OF AUSTRALIA

FTMA Australia is an independent, national organisation representing fabricators of and suppliers to the timber prefabricated truss and wall frame industry in all Australian states & territories providing a uniﬁed voice, to protect and advance our mult-billion dollar industry.

Ŷ (L-R): Leighton Williams (Placemakers), Darrina Gassanova (Vekta), Brett Martin (Independent Hardware Group) & Mike Mostert (CombiLift)

Tractors, Formula One Drivers and Rally Drivers, there is a connection Continued from Page 29

(Vekta Automation) joined me on a short tour of Wiri Timbers, Carters and Placemakers in the lead-up to the conference. Our ﬁrst thought was one of relief, as our timber shortages in Australia would have been much worse if we were required to put the amount of timber in to frames -let alone the size of the timber -- needed to meet the NZ Standards which of course needs to take in to account, snow loads, high winds and earthquakes. The second thing to hit us was how clean the plants were. I’m not suggesting at all that Australian plants aren’t tidy but the culture from the whole team on picking up waste or rubbish if they walked past it did seem to take it to a new level. Let’s face it, it is about culture and only through the whole team working together can we make our sites cleaner, which in effect also makes them safer.

The conference itself was over two days and covered similar topics to that covered at the FTMA Australia conference. The networking was fantastic, and the trade displays provided fabricators the opportunity to mix with suppliers which is, in my opinion, extremely important. The highlight for me were the presentations by Peter Bevington of Oregon ITM who talked about the productivity and training for detailers and the legendary All Blacks player Sir John Kirwan who talked about mental health. Peter looked at the different types of detailers we have, putting them in to the categories of Tractors, Formula One Drivers and Rally Drivers and it was the best analogy I’ve heard. He went on to explain the different tasks each of these detailers are best suited to and what, in his opinion, their output targets should be. The presentation also

looked at the working environment to ensure the best output from detailers and given they are one of the most important roles within a fabricators business, it was refreshing to hear. Peter will be writing a story for FTMA News which I look forward to sharing with the industry. As you all know, I’m a bit of a sport junky and have always admired Sir John Kirwan but that admiration has been taken to a new level after hearing him talk about his battles with depression. To see a room full of men, listen so intently to another man speak about depression and the fact that it is an illness not a weakness was brilliant. In an industry that is male dominated and an industry that, in my opinion, is a caring one, I’d love to see more work in this area. FTMA NZ celebrates 21 in 2019 and no-one knows how to throw a big bash better than us Aussies, so FTMA Aus-

tralia will be putting together the FTMA NZ 21st Birthday Aussie Tour which will be coordinated to ﬁt in with our National Conference on the 25 & 26 March. Multinail Australia will be hosting a Multinail Machinery Expo on Wednesday 27 March following our conference and we will be talking to fabricators on the Gold Coast and Brisbane areas to look at participating in the tour for our NZ Colleagues. I’d like to thank Lance Worthington (Wiri Timbers), Leighton Williams (Placemakers), Alan Westwood and Rene Pienaar (Carters) for hosting us at their plants as well as the FTMA NZ Executive for welcoming us at their conference. Finally, I’d like to give a huge shout out to Mike Mostert of CombiLift who was kind enough to transport Brett Martin and I throughout our tour of NZ going above and beyond what we expected. Thanks Mike.

Ŷ (L-R): Ed Serrano & Darina Gassanova (Vekta), Brett Martin (IHG) and Rene Pienaar of Carters showing them through the Auckland Plant

AUSTRALASIAN TIMBER November 2018

FTMA Australia thanks our dedicated supporters and encourages you to support those who support your industry GOLD SPONSORS

SILVER SPONSORS

BRONZE SPONSORS

COMBi iFT

L I F T I N G I N N O VAT I O N

Australasia

For a full list of the conditions of membership and a downloadable application form visit: www.ftmaaustralia.com.au

www.timberbiz.com.au

MPBENGINEERING.COM.AU WOODWORKING EQUIPMENT Smart solutions for smart timber people

Twin head Horizontal Band Resaw HP-66

Large horsepower Seimens saw wheel motors drive the blades allowing for heavy duty cutting.

Two head saw conﬁguration. Digital controllers allow accurate saw wheel positioning. Automatic blade tension is controlled by a hydraulic cylinders. Variable feed speed by electric motor and inverter.

WE GUARANTEE QUALITY & INNOVATION

(03) 9702 7933 The conveyor belt is driven by a high performance hydraulic motor.Adjustable feed speed allows ﬂexibility to saw hard and soft wood

www.timberbiz.com.au

100% Australian Owned and Operated

AUSTRALASIAN TIMBER November 2018

Multinail Machinery

Increased production Increased proďŹ tability

Local, responsive service

Reduced number of operators Reduced safety risk

PieceMaker

Wall Frame Systems

Steel Nog Trencher

Personalised Multinail.com.au

Local

Progressive AUSTRALASIAN TIMBER November 2018