Sample documents of mechanical calibration training course

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 1: CONTENTS OF CERTIFIED CALIBRATION LABORATORY ENGINEER – MECHANICAL E-LEARNING COURSE Sr. No.

The entire e-learning course has 5 main parts as below Lectures

1.

Details No. of slides

1.

Session – 1 : What is calibration?

18

2.

Session – 2 : Uncertainty of Measurement

27

3.

Session – 3 : Calibration Method and Records for Vacuum Gauge

19

4.

Session – 4 : Calibration Method and Records for Pressure Gauge

25

5.

Session – 5 : Calibration Method and Records for Weighing Balance

21

6.

Session – 6 : Calibration Method and Records for Weight

21

7.

Session – 7 : Calibration Method and Records for Tachometer

17

Total no. of slides (with Audio lectures) 

148

2.

Hand-outs (each session detail document is given in PDF and participant can download, print, or save it for future reference)

Approx. 93 Pages in PDF

3.

Actual Calibration Demonstration Videos

5 Videos (Total 24 Minutes)

4.

Session Exams at end of each session and Final Exam

5.

Certified Calibration Laboratory Engineer - Mechanical Training Certificate

Total 8 Exams Award certificate

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 1 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Part – 1 Lectures: Under this part total seven sessions are given as presentations with explanatory audio to understand the subject.

 Session - 1 : In this session, participants will learn about what is Calibration. It covers total 18 slides on below topics: 1. Overview of Session 1 2. What is calibration?

3. Why do we need Calibration?

4. Where is Calibration Required?

5. Equipment Selection 6. Types of Equipment 7. Calibration Methods 8. Metrological Traceability 9. Metrological Traceability 10. Transport and Storage 11. Requirements for Calibration through Outside Accredited Laboratory 12. Requirements for In-house Calibration 13. Requirements for Master Instruments 14. Identifying Frequency of Calibration Equipment 15. Selection of Calibration Agency 16. Selection of Calibration Agency (Continued...)

17. Elements to be addressed within the system 18. Checklist for establishing Instrument calibration system

 Session - 2 : In this session, participants will learn about the basics of Uncertainty of Measurement and Calculation Steps. It covers total 27 slides on below topics: 1. Overview of Session 2 2. What is Measurement Uncertainty?

3. Who has to calculate Measurement Uncertainty?

4. When Measurement Uncertainty needs to be calculated?

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 2 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 5. ISO/IEC 17025:2017 Requirements for Measurement Uncertainty 6. Measurement Uncertainty – Factors?

7. Uncertainty of Measurement Factors 8. Methodology to Calculate Uncertainty of Measurement 9. How many numbers of readings?

10. Effect of increasing number of Measurements in calculating Type A Uncertainty 11. Remember: Type- A Dependence 12. Step 3: Type – A Evaluation (UA) Methodology (Continued...)

13. Step 4: Calculate Type – B Evaluation (UB) 14. Step 4: Calculate Type – B Evaluation (UB) (Continued...)

15. Step 4: Calculate Type – B Evaluation (UB) (Continued...)

16. Estimate the Magnitude of the Uncertainty Contributors Type- B 17. Type- B Evaluation of Standard Uncertainty 18. Step 4: Calculate Type – B Evaluation (UB) (Continued...)

19. Step 5: Combined Uncertainty (UC) 20. Step 6: Expanded Uncertainty 21. Step 6: Expanded Uncertainty (Continued...)

22. Step 7: Reality Check 23. Step 8: Reporting the result 24. Recap of all Steps for Calculating Uncertainty of Measurement 25. The uncertainty estimation process 26. Theoretical Steps for Calculation of Measurement Uncertainty 27. Table

 Session - 3 : In this session, participants will learn calibration methods and records of Vacuum Gauge. It covers total 19 slides on below topics: 1. Overview of Session 3 2. Section – 1: Calibration Method for Vacuum Gauge (Step 1 to Step 6) 3. Step – 7: Detailed Calibration Method 4. Step – 7: Detailed Calibration Method (Continued...)

5. Step – 7: Detailed Calibration Method (Continued...)

6. Step – 8: Record Preparation 7. Step – 9: Reference / Formats / Exhibit For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 3 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 8. Section – 2: Worksheet for Vacuum Gauge 9. Worksheet for Vacuum Gauge (Blank) 10. Worksheet for Vacuum Gauge (Filled) 11. Section – 3: Measurement Uncertainty of Vacuum Gauge 12. How to Calculate Type-A Uncertainty of Vacuum Gauge?

13. How to Calculate Type-B Uncertainty of Vacuum Gauge?

14. How to Calculate Type-B Uncertainty of Vacuum Gauge? (Continued...)

15. How to Calculate Type-B Uncertainty of Vacuum Gauge? (Continued...)

16. How to Calculate Type-B Uncertainty of Vacuum Gauge? (Continued...)

17. How to Calculate Type-C Uncertainty of Vacuum Gauge?

18. Section – 4: Calibration Certificate for Vacuum Gauge 19.Calibration Certificate for Vacuum Gauge

 Session - 4 : In this session, participants will learn calibration methods and records of Pressure Gauge. It covers total 25 slides on below topics: 1. Overview of Session 4 2. Section – 1: Calibration Method for Pressure Gauge (Step 1 to Step 6) 3. Step – 7: Detailed Calibration Method 4. Step – 7: Detailed Calibration Method (Continued...)

5. Step – 7: Detailed Calibration Method (Continued...)

6. Step – 7: Detailed Calibration Method (Continued...)

7. Step – 7: Detailed Calibration Method (Continued...)

8. Step – 7: Detailed Calibration Method (Continued...)

9. Step – 7: Detailed Calibration Method (Continued...)

10. Step – 7: Detailed Calibration Method (Continued...)

11. Step – 8: Record Preparation 12. Step – 9: Reference / Formats / Exhibit 13. Section – 2: Worksheet for Pressure Gauge 14. Worksheet for Pressure Gauge (Blank) 15. Worksheet for Pressure Gauge (Filled) 16. Section – 3: Measurement Uncertainty of Pressure Gauge 17. How to Calculate Type-A Uncertainty of Pressure Gauge?

18. How to Calculate Type-B Uncertainty of Pressure Gauge?

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 4 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 19. How to Calculate Type-B Uncertainty of Pressure Gauge? (Continued...)

20. How to Calculate Type-B Uncertainty of Pressure Gauge? (Continued...)

21. How to Calculate Type-B Uncertainty of Pressure Gauge? (Continued...)

22. How to Calculate Type-B Uncertainty of Pressure Gauge? (Continued...)

23. How to Calculate Type-C Uncertainty of Pressure Gauge?

24. Section – 4: Calibration Certificate for Pressure Gauge 25. Calibration Certificate for Pressure Gauge

 Session - 5 : In this session, participants will learn calibration methods and records of Weighing Balance. It covers total 21 slides on below topics: 1. Overview of Session 5 2. Section – 1: Calibration Method for Weighing Balance (Step 1 to Step 6) 3. Step – 7: Detailed Calibration Method 4. Step – 7: Detailed Calibration Method (Continued...)

5. Step – 7: Detailed Calibration Method (Continued...)

6. Step – 8: Record Preparation 7. Step – 9: Reference / Formats / Exhibit 8. Section – 2: Worksheet for Weighing Balance 9. Worksheet for Weighing Balance (Blank) 10. Worksheet for Weighing Balance (Blank) (Continued...)

11. Worksheet for Weighing Balance (Filled) 12. Worksheet for Weighing Balance (Filled) (Continued...)

13. Section – 3: Measurement Uncertainty of Weighing Balance 14. How to Calculate Type-A Uncertainty of Weighing Balance?

15. How to Calculate Type-B Uncertainty of Weighing Balance?

16. How to Calculate Type-B Uncertainty of Weighing Balance? (Continued...)

17. How to Calculate Type-B Uncertainty of Weighing Balance? (Continued...)

18. How to Calculate Type-C Uncertainty of Weighing Balance?

19. Section – 4: Calibration Certificate for Weighing Balance 20. Calibration Certificate for Weighing Balance 21. Calibration Certificate for Weighing Balance (Continued...)

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 5 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com  Session - 6 : In this session, participants will learn calibration methods and records of Weight. It covers total 21 slides on below topics: 1. Overview of Session 6 2. Section – 1: Calibration Method for Weight (Step 1 to Step 6) 3. Calibration Method for Weight (Continued….)

4. Step – 7: Detailed Calibration Method 5. Step – 7: Detailed Calibration Method (Continued...)

6. Step – 7: Detailed Calibration Method (Continued...)

7. Step – 7: Detailed Calibration Method (Continued...)

8. Step – 8: Record Preparation 9. Step – 9: Reference / Formats / Exhibit 10. Section – 2: Worksheet for Weight 11. Worksheet for Weight (Blank) 12. Worksheet for Weight (Filled) 13. Section – 3: Measurement Uncertainty of Weight 14. How to Calculate Type-A Uncertainty of Weight?

15. How to Calculate Type-B Uncertainty of Weight?

16. How to Calculate Type-B Uncertainty of Weight? (Continued...)

17. How to Calculate Type-B Uncertainty of Weight? (Continued...)

18. How to Calculate Type-B Uncertainty of Weight? (Continued...)

19. How to Calculate Type-C Uncertainty of Weight?

20. Section – 4: Calibration Certificate for Weight 21. Calibration Certificate for Weight

 Session - 7 : In this session, participants will learn calibration methods and records of Tachometer. It covers total 17 slides on below topics: 1. Overview of Session 7 2. Section – 1: Calibration Method for Tachometer (Step 1 to Step 6) 3. Step – 7: Detailed Calibration Method 4. Step – 7: Detailed Calibration Method (Continued...)

5. Step – 7: Detailed Calibration Method (Continued...)

6. Step – 8: Record Preparation For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 6 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 7. Step – 9: Reference / Formats / Exhibit 8. Section – 2: Worksheet for Tachometer 9. Worksheet for Tachometer (Blank) 10. Worksheet for Tachometer (Filled) 11. Section – 3: Measurement Uncertainty of Tachometer 12. How to Calculate Type-A Uncertainty of Tachometer?

13. How to Calculate Type-B Uncertainty of Tachometer?

14. How to Calculate Type-B Uncertainty of Tachometer? (Continued...)

15. How to Calculate Type-C Uncertainty of Tachometer?

16. Section – 4: Calibration Certificate for Tachometer 17. Calibration Certificate for Tachometer

Part – 2 Hand-outs: For each lectures, hand-out is given in PDF format. The participant can download or print any documents to read it later to get detailed knowledge of all the seven topics.

Sr. No 1 2 3 4 5 6 7

Name of Literature

Total Pages

Guidelines for Calibration of Instruments Evaluation of Measurement Uncertainty Calibration Method - Vacuum Gauge Calibration Method - Pressure Gauge Calibration Method - Weighing Balance Calibration Method – Weight Calibration Method - Tachometer

14 08 12 15 18 15 11

Part – 3 Actual Calibration Demonstration Videos: A complete video demonstration of actual calibration is provided under this section.

Calibration engineer can view and learn how to perform calibration and maintain the quality of instrument calibration process.

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 7 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Sr. No 1 2 3 4 5

Name of Videos Calibration Method - Vacuum Gauge Calibration Method - Pressure Gauge Calibration Method - Weighing Balance Calibration Method - Weight Calibration Method - Tachometer

Duration 6 Minutes 5 Minutes 4 Minutes 4 Minutes 3 Minutes

Part – 4 Exams: Each session contains session exam, Participants have to pass the exam after completion of each session. After passing all session exams there is one final exam, participant must have to pass exam with minimum 80% marks. User can reappear and clears each exam to complete the course and get download/print their Certified Calibration Laboratory Engineer Mechanical training certificate.

Part – 5 Training Certificate: After passing the exam the colorful training certificate is generated and user can download it or print it. Any one globally can cross verify the training certificate through our LMS platform.

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 8 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 2: COURSE OBJECTIVES Upon Completion of this course, participants will be able to: 

    

Basic knowledge of calibration such as Requirements of calibration, why do we need calibration, equipment selection, Types of equipment, Metrological traceability, selection of calibration agency etc.

Understand requirement of ISO/IEC 17025:2017 requirements for measurement uncertainty Understand theory of uncertainty of measurement, selection of uncertainty measurement factors, and calculation of measurement uncertainty.

Understand the relevance of instrument measurement, including the use of instrument.

Understand technical requirements and calibration method for relevant instruments.

Preparation of calibration certificates and work sheet.

Chapter - 3: WHO SHOULD ATTEND THIS COURSE? This course is developed and brought to you by Punyam Academy; an ISO/IEC 17024 accredited training provider company, which offers various e-learning as well as classroom training courses for working professionals, college students, and other individuals for enhancing their career to new heights. Our e-learning courses help them to succeed in today's competitive environment, to renew licenses, and to update, strengthen and add quality to their existing knowledge and skills. Our courses are also useful for those who want to get certification, or start a new profession.

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 9 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 4: USER MANUAL Compatibility and Requirements for smoothly running our course 1. Bandwidth: Internet bandwidth must me 1 MBPS or higher.

2. Operating System: Microsoft Windows XP and higher versions, iOS, Android.

3. Browser: Best viewable in Mozilla Firefox, Google Chrome. Also supports Internet Explorer.

4. Screen Resolution: To view slides properly, you must have a screen resolution of 1024 x 768 or higher.

5. Cookies: You must have browser cookies enabled, so that we can maintain your current session as you navigate through the application.

6. JavaScript: You must have enabled JavaScript, so that application runs smoothly.

7. Adobe Acrobat Reader: Some documents in our application are in .pdf format, so you must have installed adobe acrobat reader in your computer to be able to read such documents that you download.

8. Pop-up Enable: In your browser setting, check Pop-up blocker off, or enable Pop-up window.

9. Speaker: You must have speakers or a headphone attached to your computer, so that you can listen to the course lecture while learning.

Click

ENROL

to Purchase this Course.

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 10 of 11

PAC02: Certified Calibration Laboratory Engineer Mechanical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 5: ABOUT COMPANY Punyam Academy is an ISO/IEC 17024 certified training provider company, which offers various ISO Training Courses and conducts webinars for online certification as well as classroom training. We are a leading name in E-learning, training and certification on ISO standards and all other types of management system standards. Punyam Academy specializes in a complete range of courses on awareness, auditor and lead auditor courses on ISO 9001, ISO 14001, ISO 45001, ISO 22000, ISO 27001, OHSAS 18001, ISO/IEC 17025, ISO/IEC 17020, ISO/IEC 17021, FSSC 22000, ISO 27001, ISO 50001, ISO 13485, ISO 20000, ISO/IEC 17024, ISO 17034, Sedex, ISO 22301, NABH, Certified Calibration Engineer and other management system training courses. We provide E-learning courses on all of these topics through effective, enjoyable and time-saving online training sessions and webinars. We have conducted more than 300 public training programs as well as online corporate training sessions in more than 45 countries.

How Our E-learning Course Works,

Click Here

Visit Our Website for more E-learning Courses and PPT Packages:

https://www.punyamacademy.com/eshop

For more information about Certified Calibration Laboratory Engineer – Mechanical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 11 of 11