Online course for electrical calibration training by Punyam Academy

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 1: CONTENTS OF CERTIFIED CALIBRATION LABORATORY ENGINEER – ELECTRO TECHNICAL E-LEARNING COURSE Sr. No.

The entire e-learning course has 5 main parts as below Lectures

Details No. of slides

Session – 1 : What is calibration?

Session – 2 : Uncertainty of Measurement

Session – 3 : Calibration Method and Records for Multimeter

Session – 4 : Calibration Method and Records for Temperature Controller

Session – 5 : Calibration Method and Records for Energy Meter

Session – 6 : Calibration Method and Records for Clamp Meter

Total no. of slides (with Audio lectures)  2.

Hand-outs (each session detail document is given in PDF and participant can download, print, or save it for future reference)

3. Actual Calibration Demonstration Videos 4. Session Exams at end of each session and Final Exam 5.

Certified Calibration Laboratory Engineer – Electro Technical Training Certificate

148 Approx. 76 Pages in PDF 4 Videos (Total 22 Minutes) Total 7 Exams Award certificate

For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 1 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Part – 1 Lectures: Under this part total six sessions are given as presentations with explanatory audio to understand the subject.

 Session - 1 : In this session, participants will learn about what is Calibration. It covers total 18 slides on below topics: 1. Overview of Session 1 2. What is calibration? 3. Why do we need Calibration? 4. Where is Calibration Required? 5. Equipment Selection 6. Types of Equipment 7. Calibration Methods 8. Metrological Traceability 9. Metrological Traceability 10. Transport and Storage 11. Requirements for Calibration through Outside Accredited Laboratory 12. Requirements for In-house Calibration 13. Requirements for Master Instruments 14. Identifying Frequency of Calibration Equipment 15. Selection of Calibration Agency 16. Selection of Calibration Agency (Continued...) 17. Elements to be addressed within the system 18. Checklist for establishing Instrument calibration system

 Session - 2 : In this session, participants will learn about the basics of Uncertainty of Measurement and Calculation Steps. It covers total 27 slides on below topics: 1. Overview of Session 2 2. What is Measurement Uncertainty? 3. Who has to calculate Measurement Uncertainty? 4. When Measurement Uncertainty needs to be calculated? For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 2 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 5. ISO/IEC 17025:2017 Requirements for Measurement Uncertainty 6. Measurement Uncertainty – Factors? 7. Uncertainty of Measurement Factors 8. Methodology to Calculate Uncertainty of Measurement 9. How many numbers of readings? 10. Effect of increasing number of Measurements in calculating Type A Uncertainty 11. Remember: Type- A Dependence 12. Step 3: Type – A Evaluation (UA) Methodology (Continued...) 13. Step 4: Calculate Type – B Evaluation (UB) 14. Step 4: Calculate Type – B Evaluation (UB) (Continued...) 15. Step 4: Calculate Type – B Evaluation (UB) (Continued...) 16. Estimate the Magnitude of the Uncertainty Contributors Type- B 17. Type- B Evaluation of Standard Uncertainty 18. Step 4: Calculate Type – B Evaluation (UB) (Continued...) 19. Step 5: Combined Uncertainty (UC) 20. Step 6: Expanded Uncertainty 21. Step 6: Expanded Uncertainty (Continued...) 22. Step 7: Reality Check 23. Step 8: Reporting the result 24. Recap of all Steps for Calculating Uncertainty of Measurement 25. The uncertainty estimation process 26. Theoretical Steps for Calculation of Measurement Uncertainty 27. Table

 Session - 3 : In this session, participants will learn calibration methods and records of Multimeter. It covers total 48 slides on below topics: 1. Overview of Session 3 2. Section – 1: Calibration Method for Multimeter (Step 1 to Step 6) 3. Step – 7: Detailed Calibration Method – Digital Multimeter (Safety Precautions) 4. Step – 8: Detailed Calibration Method 5. Step – 8: Detailed Calibration Method (Continued...) 6. Step – 8: Detailed Calibration Method (Continued...) For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 3 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 7. Step – 8: Detailed Calibration Method (Continued...) 8. Step – 8: Detailed Calibration Method (Continued...) 9. Step – 8: Detailed Calibration Method (Continued...) 10. Step – 8: Detailed Calibration Method (Continued...) 11. Step – 8: Detailed Calibration Method (Continued...) 12. Step – 8: Detailed Calibration Method (Continued...) 13. Step – 9: Record Preparation 14. Step – 10: Reference / Formats / Exhibit 15. Section – 2: Worksheet for Digital Multimeter 16. Worksheet for Digital Multimeter (Voltage as a source) - Blank 17. Worksheet for Digital Multimeter (Voltage as a source) - Filled 18. Worksheet for Digital Multimeter (Ampere as a source) - Blank 19. Worksheet for Digital Multimeter (Ampere as a source) - Filled 20. Worksheet for Digital Multimeter (Resistance as a source) - Blank 21. Worksheet for Digital Multimeter (Resistance as a source) - Filled 22. Worksheet for Digital Multimeter (Frequency as a source) - Blank 23. Worksheet for Digital Multimeter (Frequency as a source) - Filled 24. Section – 3: Measurement Uncertainty of Digital Multimeter 25. How to Calculate Type A Uncertainty for Digital Multimeter (Volt as a source) 26. How to Calculate Type B Uncertainty for Digital Multimeter (Volt as a source) 27. How to Calculate Type B Uncertainty for Digital Multimeter (Volt as a source) 28. How to Calculate Type C Uncertainty for Digital Multimeter (Volt as a source) 29. How to Calculate Type A Uncertainty for Digital Multimeter (Ampere as a source) 30. How to Calculate Type B Uncertainty for Digital Multimeter (Ampere as a source) 31. How to Calculate Type B Uncertainty for Digital Multimeter (Ampere as a source) 32. How to Calculate Type C Uncertainty for Digital Multimeter (Ampere as a source) 33. How to Calculate Type A Uncertainty for Digital Multimeter (Resistance as a source) 34. How to Calculate Type B Uncertainty for Digital Multimeter (Resistance as a source) 35. How to Calculate Type B Uncertainty for Digital Multimeter (Resistance as a source) For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 4 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 36. How to Calculate Type C Uncertainty for Digital Multimeter (Resistance as a source) 37. How to Calculate Type A Uncertainty for Digital Multimeter (Frequency as a source) 38. How to Calculate Type B Uncertainty for Digital Multimeter (Frequency as a source) 39. How to Calculate Type B Uncertainty for Digital Multimeter (Frequency as a source) 40. How to Calculate Type C Uncertainty for Digital Multimeter (Frequency as a source) 41. Section – 4: Calibration Certificate for Digital Multimeter 42. Calibration Certificate for Digital Multimeter 43. Calibration Certificate for Digital Multimeter (Continued...) 44. Calibration Certificate for Digital Multimeter (Continued...) 45. Calibration Certificate for Digital Multimeter (Continued...) 46. Calibration Certificate for Digital Multimeter (Continued...) 47. Calibration Certificate for Digital Multimeter (Continued...) 48.Calibration Certificate for Digital Multimeter (Continued...)

 Session - 4 : In this session, participants will learn calibration methods and records of Temperature Controller. It covers total 17 slides on below topics: 1. Overview of Session 4 2. Section – 1: Calibration Method for Temperature Controller (Step 1 to Step 6) 3. Step – 7: Detailed Calibration Method 4. Step – 8: Detailed Calibration Method 5. Step – 8: Detailed Calibration Method (Continued...) 6. Step – 9: Record Preparation 7. Step – 10: Reference / Formats / Exhibit 8. Section – 2: Worksheet for Temperature Controller 9. Worksheet for Temperature Controller (Blank) 10. Worksheet for Temperature Controller (Filled) 11. Section – 3: Measurement Uncertainty of Temperature Controller For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 5 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 12. How to Calculate Type A Uncertainty of Temperature Controller? 13. How to Calculate Type B Uncertainty of Temperature Controller? 14. How to Calculate Type B Uncertainty of Temperature Controller? (Continued...) 15. How to Calculate Type C Uncertainty of Temperature Controller? (Combined Uncertainty) 16. Section – 4: Calibration Certificate for Temperature Controller 17. Calibration Certificate for Temperature Controller

 Session - 5 : In this session, participants will learn calibration methods and records of Energy Meter. It covers total 17 slides on below topics: 1. Overview of Session 5 2. Section – 1: Calibration Method for Energy Meter (Step 1 to Step 6) 3. Step – 7: Detailed Calibration Method – Energy Meter (Safety Precautions) 4. Step – 8: Detailed Calibration Method 5. Step – 8: Detailed Calibration Method (Continued...) 6. Step – 9: Record Preparation 7. Step – 10: Reference / Formats / Exhibit 8. Section – 2: Worksheet for Energy Meter 9. Worksheet for Energy Meter (Blank) 10. Worksheet for Energy Meter (Filled) 11. Section – 3: Measurement Uncertainty of Energy Meter 12. How to Calculate Type-A Uncertainty of Energy Meter? 13. How to Calculate Type-B Uncertainty of Energy Meter? 14. How to Calculate Type-B Uncertainty of Energy Meter? (Continued...) 15. How to Calculate Combined Uncertainty of Energy Meter? 16. Section – 4: Calibration Certificate for Energy Meter 17. Calibration Certificate for Energy Meter

 Session - 6 : In this session, participants will learn calibration methods and records of Clamp Meter. It covers total 21 slides on below topics: 1. Overview of Session 6 2. Section – 1: Calibration Method for Clamp Meter (Step 1 to Step 6) For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 6 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 3. Step – 7: Detailed Calibration Method – Digital Clamp Meter (Safety Precautions) 4. Step – 8: Detailed Calibration Method 5. Step – 8: Detailed Calibration Method (Continued...) 6. Step – 8: Detailed Calibration Method (Continued...) 7. Step – 8: Detailed Calibration Method (Continued...) 8. Step – 8: Detailed Calibration Method (Continued...) 9. Step – 9: Record Preparation 10. Step – 10: Reference / Formats / Exhibit 11. Section – 2: Worksheet for Digital Clamp Meter 12. Worksheet for Digital Clamp Meter (Ampere as a source) - Blank 13. Worksheet for Digital Clamp Meter (Ampere as a source) - Filled 14. Section – 3: Measurement Uncertainty of Digital Clamp Meter 15. How to Calculate Type A Uncertainty for Digital Clamp Meter (Ampere as a source) 16. How to Calculate Type B Uncertainty for Digital Clamp Meter (Ampere as a source) 17. How to Calculate Type B Uncertainty for Digital Clamp Meter (Ampere as a source) 18. How to Calculate Type C Uncertainty for Digital Clamp Meter (Ampere as a source) 19. Section – 4: Calibration Certificate for Digital Clamp Meter 20. Calibration Certificate for Digital Clamp Meter 21. Calibration Certificate for Digital Clamp Meter (Continued...)

Part – 2 Hand-outs: For each lectures, hand-out is given in PDF format. The participant can download or print any documents to read it later to get detailed knowledge of all the seven topics. Sr. No 1

Name of Literature Guidelines for Calibration of Instruments

Total Pages 14

For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 7 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com 2 3 4 5 6

Evaluation of Measurement Uncertainty Calibration Method – Digital Multimeter Calibration Method - Temperature Controller Calibration Method - Energy Meter Calibration Method – Digital Clamp Meter

08 43 11 11 42

Part – 3 Actual Calibration Demonstration Videos: A complete video demonstration of actual calibration is provided under this section. Calibration engineer can view and learn how to perform calibration and maintain the quality of instrument calibration process. Sr. No 1 2 3 4

Name of Videos Calibration Method – Digital Multimeter Calibration Method - Temperature Controller Calibration Method - Energy Meter Calibration Method – Digital Clamp Meter

Duration 5 Minutes 6 Minutes 5 Minutes 6 Minutes

Part – 4 Exams: Each session contains session exam, Participants have to pass the exam after completion of each session. After passing all session exams there is one final exam, participant must have to pass exam with minimum 80% marks. User can reappear and clears each exam to complete the course and get download/print their Certified Calibration Laboratory Engineer – Electro Technical training certificate.

Part – 5 Training Certificate: After passing the exam the colorful training certificate is generated and user can download it or print it. Any one globally can cross verify the training certificate through our LMS platform.

For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 8 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 2: COURSE OBJECTIVES Upon Completion of this course, participants will be able to: 

    

Basic knowledge of calibration such as requirements of calibration, why do we need calibration, equipment selection, types of equipment, metrological traceability, selection of calibration agency etc. Understand requirement of ISO/IEC 17025:2017 requirements for measurement uncertainty Understand theory of uncertainty of measurement, selection of uncertainty measurement factors, and calculation of measurement uncertainty. Understand the relevance of instrument measurement, including the use of instrument. Understand technical requirements and calibration method for relevant instruments. Preparation of calibration certificates and work sheet.

Chapter - 3: WHO SHOULD ATTEND THIS COURSE? This course is developed and brought to you by Punyam Academy; an ISO/IEC 17024 accredited training provider company, which offers various e-learning as well as classroom training courses for working professionals, college students, and other individuals for enhancing their career to new heights. Our e-learning courses help them to succeed in today's competitive environment, to renew licenses, and to update, strengthen and add quality to their existing knowledge and skills. Our courses are also useful for those who want to get certification, or start a new profession.

For more information about Certified Calibration Laboratory Engineer – Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 9 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 4: USER MANUAL Compatibility and Requirements for smoothly running our course 1. Bandwidth: Internet bandwidth must me 1 MBPS or higher. 2. Operating System: Microsoft Windows XP and higher versions, iOS, Android. 3. Browser: Best viewable in Mozilla Firefox, Google Chrome. Also supports Internet Explorer. 4. Screen Resolution: To view slides properly, you must have a screen resolution of 1024 x 768 or higher. 5. Cookies: You must have browser cookies enabled, so that we can maintain your current session as you navigate through the application. 6. JavaScript: You must have enabled JavaScript, so that application runs smoothly. 7. Adobe Acrobat Reader: Some documents in our application are in .pdf format, so you must have installed adobe acrobat reader in your computer to be able to read such documents that you download. 8. Pop-up Enable: In your browser setting, check Pop-up blocker off, or enable Pop-up window. 9. Speaker: You must have speakers or a headphone attached to your computer, so that you can listen to the course lecture while learning.

Click

ENROL

to Purchase this Course.

For more information about Certified Calibration Laboratory Engineer â&#x20AC;&#x201C; Electro Technical Training Click Here www.punyamacademy.com E mail: sales@punyamacademy.com Tele: +91-79-2979 5322

Page 10 of 11

PAC04: Certified Calibration Laboratory Engineer Electro Technical E-learning Course Duration: 8 Hours

Website: www.Punyamacademy.com Chapter - 5: ABOUT COMPANY Punyam Academy is an ISO/IEC 17024 certified training provider company, which offers various ISO Training Courses and conducts webinars for online certification as well as classroom training. We are a leading name in E-learning, training and certification on ISO standards and all other types of management system standards. Punyam Academy specializes in a complete range of courses on awareness, auditor and lead auditor courses on ISO 9001, ISO 14001, ISO 45001, ISO 22000, ISO 27001, OHSAS 18001, ISO/IEC 17025, ISO/IEC 17020, ISO/IEC 17021, FSSC 22000, ISO 27001, ISO 50001, ISO 13485, ISO 20000, ISO/IEC 17024, ISO 17034, Sedex, ISO 22301, NABH, Certified Calibration Engineer and other management system training courses. We provide E-learning courses on all of these topics through effective, enjoyable and time-saving online training sessions and webinars. We have conducted more than 300 public training programs as well as online corporate training sessions in more than 45 countries.

How Our E-learning Course Works,

Click Here

Visit Our Website for more E-learning Courses and PPT Packages:

https://www.punyamacademy.com/eshop

Page 11 of 11