60 how to articles

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/23)

0% (0/23)

Word Count: 368 1. How To Open A Wine Bottle Without A Corkscrew Here is the thing: You are off with the family for Christmas. Because you are the adventurous type you wanted to spend the Holidays in North Carolina where the weather is typically not as cold as in your place. You plan to have a picnic of some sort in a sea side resort where things are a bit breezy and calm. You have everything set and though it is cold, you feel that everyone still manages to be upbeat. After the hearty meal, you wanted to kick it off with a glass of wine but one thing is missing… the corkscrew! Well then should you end up not drinking the wine? Open the wine bottle even without a corkscrew!

Here are the things that you will need if you want to open the wine bottle without using the corkscrew: 1 Pliers 2 Screw 3 Knife These things probably would be the available tools around since you have them readily on your car’s tool box. With these you can begin opening the wine bottle with the following steps: Using the pliers: 1. You can try gripping the cork with the pliers. Be sure that you can grip it well and it will not slip.

2. Twist the cork. Don’t pull it so you can avoid exerting pressure on the lid of the bottle which may cause it to get broken.

Spotlight on the screw: 1. Insert the screw into the soft cork. Be sure that the screw is not loosely inserted.

2. With the help of the pliers pull the screw so you can pull with it the cork.

Here are ways to use the knife according to WikiHow.com: 1. Try inserting the knife into the bottle of the wine. Be sure it just fit into the neck of the bottle.

2. Try moving the knife in the neck and around the cork.

3. Move the cork over slowly until it loosens.

These are just few of the many things you can do to open the wine bottle without using a corkscrew. However you need to be sure that you use these tools properly so you can avoid accidents such as cutting your self or getting the bottle broken.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/16)

0% (0/16)

Word Count: 308

2. How to Mix a chocolate covered cherry layered shot drink The Holiday season seems to be setting the mood of the metropolis now. Even though the streets are already covered with snow, people still get the nerve to wrack off the shiver and party all night. There is no reason to be guilty because the season is definitely the time to party and wear out those dancing shoes you have been keeping in your closet for the past months. But since it is really very cold to go bar hopping outside, you could go for a better and easier alternative, which is to party in your own home! Grab a drink and let your guest enjoy a treat with your own chocolate covered cherry layered shot drink!

To make your own chocolate covered cherry layered shot drink, here are the things that you need to prepare: 1 Liquors 2 Kalhua/ Cream of Cacao 3 Irish Cream 4 Grenadine Oh, and don’t forget your glass! With all things in hand, you may begin doing your own chocolate covered cherry layered shot, here’s how!

1. First start with the densest fluid available; in this case, the grenadine is the heaviest thus it must go first!

2. Next, add in the Kalhua or Cream of cacao; whichever is available. Just make sure you don’t pour it too quickly but if you already did then let it stand for about tow minutes. The two liquids will separate on their own.

3. last, add in the Irish cream but be very careful since the Kalhua or Cream of cacao and the Irish Cream does not separate as quickly as the first two ingredients.

Just these simple steps will make you the best bartender in town! Always remember though not to drink too much. Of course, moderation is always the key to a good party! Enjoy the Holiday with your own chocolate covered cherry layered shot!

Matched PhrasesGoogle Results FoundYahoo Results Total Matched Phrases / Total Submitted6% (1/18)6% (1/18) Word Count: 307 3. How to Mix a Midori Sour cocktail Whether it is Christmas season or not, people will always find the way to relax and spend some time with friends and family. Friends usually go out during weekends since it is a nice experience that you end the week on a bar to just while everything off. A little distressing activity is what everyone needs from time to time. These days are tough though considering that the economy is not doing well and the crime rate is getting worse, you will never know if you are still safe in bars. The news seems to be scaring party animals with news about people hurting or killing each other in bars.

The streets are never too safe for drunken people too! You will never really know what will happen outside your homes especially when you are drunk. A quick solution is to be an instant party hostess and hold a house party! A party will never be as nice without drinks thus a quick recipe is a great help. If you want to serve Midori sour cocktail then here are what you would need:

1 2 3 4 5 6 7

1 oz Midori melon liqueur 1 oz whisky sour mix 2 oz soda 2 cherries Highball Glass Ice Stirrer

Once you have secured all these things, you are set to mix them off like a pro. Here’s how to make a Midori Sour Cocktail: 1. Fill the highball glass with ice. Fill it with just enough or as desired.

2. Add the Midori, Whisky sour mix and soda.

3. Stir.

4. Add Cherries.

5. Serve!

Aren’t those steps so easy to do? Fro sure your friends will be happy to party in your house with this drink. One thing though, never drink too much! And always keep that cool mind so no trouble would spoil the party!

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/18)

Yahoo Results Found 0% (0/18)

Word Count: 301 4. Elementary Steps on How to Make a Pina Colada Party the night away with everyone’s favorite sweet and rum-based cocktail drink – Pina Colada! Puerto Rico’s official beverage is a mix of light rum, coconut cream and pineapple juice; blended with ice; and garnished with pineapple wedge or maraschino cherry. This drink is perfect for a ‘chill and talk’ kind of party and excellent for a ‘party like a rock star’ kind of event. So get your glasses going and drink till you drop!

Things you’ll need to prepare for a yummy Pina Colada drink: prepare 1 cup of coconut milk, there should be 4 cups of yummy pineapple juice, try getting 2 cups of Puerto Rican rum, take out the bucket of crushed ice, and set your 4 maraschino cherries with 4 chunks of fresh pineapple ready. All these ingredients are the secret weapons to your enticing drink.

To complete your Pina Colada recipe, you’ll need to follow 3 simple and easy-tofollow steps. First, you’ll need to mix your 1 cup of coconut milk together with the ice. Blend everything in a huge glass. Next is to decorate all glasses with maraschino cherries. Add a huge chunk of natural fresh pineapple as well for decoration and additional taste. This recipe serves 4 drinking guests. Final step is to sip, drink, relax and enjoy your yummy pina colada drink!

An additional bonus to this special recipe is some tips and warnings created for the certified drinkers out there. Always put in mind that fresh and unprocessed ingredients are always the best-tasting bunch. Unfazed ingredients definitely taste better than preservatives. And just like when you drink any other alcoholic beverage, always make sure that you know your limitations in drinking especially if you still

have responsibilities after the party (like driving and etc.) that you’ll have to attend to with sober senses.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/20)

Yahoo Results Found 0% (0/20)

Word Count: 339 5. How to Build a Beer Bong – The Instructions You’ve been working like a dog all week and Friday night’s here and you’re ready to get the party starting, but suddenly your boss calls you and asks you to finish the last minute work before you leave. You’re frustrated as you stomp back to your desk and swallow the pent-up longing for alcohol in your lips. But before you wallow in self-pity, think again! Because perfect for your situation is the beer bong! With this machine, gravity will bring the beer right down to your waiting lips.

Materials needed are simple and easy-to-find: you’ll need one funnel, special tubes and new clamps. The use of ball valve is optional in building this machine.

You begin the procedure by visiting your favorite hardware shop and choose a funnel to buy. Most preferred though is that you get a large funnel that ensures a wide opening because the size is responsible for determining the amount of liquid that may be poured out in a single round. Pick out a tube then to be used for the beer bong. Prepare a tube that is 2 to 2 and ½ inches in diameter. Check if it is wide enough to permit the fast flow of beer but it should be able to stop the beer from staining the mouth at the same time. Try to cut the tube in half according to the length of your body. Take the funnel and fasten it to the tube then using tape or clamps, close the vehicle passage. The valve can also be included if desired. The ball valve simple allows a more aesthetic appearance to the blocking of beer flow at the other end of the tube. You can then customize the beer bong according to your personality and likes using spray paint or heavy usage.

Tips and warnings created for this procedure is that beer bong should be tested to ensure its quality. The excessive use of beer bong which might possibly lead to intoxication. Always remember to drive safely and drink responsibly.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/24)

Yahoo Results Found 0% (0/24)

Word Count: 337 6. Mix and Blend: How to Mix a Summer Cocktail Have you been looking for the perfect cocktail drink for this summer? Well you you’re about to experience the fizzy taste of the spiked and citrus drink perfect for those lazy “patio days”. Learn how to easily mix and blend this perfect cocktail drink for your summer nights.

Prepare a high cocktail glass for your drink and jigger or shot glasses for your finished product. Start taking out your lemon wedges and ice cubes as major ingredients for your drink. An 8.oz carbonated citrus-flavored soda and a 1 ½ oz. high-end type of vodka are perfect to round up all the things you’ll need for your drink.

Put the high ball or the high cocktail glass into the freezer and allow it to chill for a few minutes. Place all the ice cubes inside the metal shaker. After which, try to measure 1 ½ shots of vodka and add it into the shaker with all your ice cubes. Add the citrus-flavored soda into the shaker as well. Take the lemon and generously squeeze it into the shaker; afterwards, set aside the wedge. Shut the shaker and vigorously shake the mixture. Leave the mixture to stand for a few minutes to give the carbonation enough time to settle. Take out the high cocktail glass from the freezer and pour the shaker mixture into the glass. Take the lemon wedge and add it or place in the glass rim as special garnish.

Favorite tips to indulge on are provided with this recipe as well: try to use a 2.oz soda and 1 oz. vodka on a martini glass to have a straight-up cocktail. Do not include the ice or strain the ice using the cocktail shaker. Pour everything into the martini glass. You can control the amount of alcohol you want the cocktail recipe to have.

You can actually mix milder vodka by including more ice, lemon and soda. Always remember to drink only if you are of appropriate age and trust your own judgment in drinking alcoholic beverages.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/21)

0% (0/21)

Word count: 350 words 7. How to Rainproof your camcorder for cheap Rain is a nice concept for a photo or video shoot if and only if it is taken perfectly.

Most shoots taken when it is raining is mostly done by putting the camera indoor and zooming in the lens to take a good shot of the subject and of course, avoiding the camcorder to get wet under the rain. You can use a rainproof housing but it is too expensive. You can rainproof your camcorder on your own.

All you need in making your camcorder rainproof for cheap are a pair of scissors, knife, the quick release plate that comes with your tripod and a very large detergent bottle, the larger the better. Make sure the handle of the detergent bottle is strong.

This method costs nothing as long as you have everything you need in your house and it only takes 5 minutes to do this.

1) Get the detergent bottle and cut off with the use of the knife its top part.

Make sure the hole is a little bigger than the lens of your camcorder.

2) Cut the bottom of the bottle as well but do not cut it completely. Make sure that you leave a flap. This hole will be used when you put your camcorder in.

3) Cut a small notch on the one side—the side opposite the handle.

4) Put your camera in via the flap you cut in step 2. Make sure the lens is sticking out of the front of the hole. Check the hole done in step 1 if it is

bigger than the lens so as not to capture the edges of the bottle.

5) Place the release plate that comes with your tripod on the notch you made in step 3. Pop the plate. You can now attach it to your tripod.

This is so easy for you and you do not have to pay anything to rainproof your camcorder. Your results in your shoot will be as good as you want it to be. Plus, your camcorder is very safe and it surely will not be destroyed.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/24)

0% (0/24)

Word count: 335 words 8. How to Ship a Dog They say that a dog is every person's best friend. A lot of people care and love their dogs just as much as they love their family. They treat dogs not like animals but like their brother. If a family moves away to another place, a dog will always be with them. It is impossible to leave the dog alone because it is likely to ship it with them.

Learn how to ship a dog securely and correctly. Here's how: 1) Try to check the rules and instructions of the airlines as to how to ship the dog via airplane. Most airlines depend on the present weather condition. If it is toowarm or cold, they will not take the dog for shipping. You should know the regulations since each airline has different regulations.

2) Before traveling, make sure you bring your pet dog to its veterinarian for general check up. Ensure that the dog is in good condition and its papers are updated. It is never advisable to ship a dog that is sick. Try asking the vet for the probable way on how to calm your dog. It is best to calm your dog before a trip.

3) Because you are traveling with your dog, you sure do not want to carry it all the time during the trip. That is why you need to buy a traveling kennel for the dog.

Make sure that it is spacious enough for your pet to move around and lay down.

Take note also that the dog needs to have water, food and a toy. Label the dog's kennel with your contact information. This will support the officials of the airlines just in case it will get lost.

4) If your dog needs special treatment, inform the transporter beforehand for them to know what to do.

It is best to know what to do before traveling with your dog or shipping it. This helps you not to lose your dog and you will feel safe about it.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/21)

0% (0/21)

Word count: 301 words 9. How to Mix a Texas Prairie Fire shot Planning a house party is not that easy. You need to plan out the program, the food and of course, the best drinks for your guests. You need to please them for them not to find your party boring. You can prepare prairie fire shot drinks A very popular prairie fire shot drink that will surely blow the minds of your guests is the Texas Prairie Fire Shot. You will only need ingredients that you will only find in your kitchen.

You will need tequila, lime juice and Tabasco sauce. Tequila is Mexican liquor that is distilled from juices obtained blue agave plants that grow in the region of Tequila.

Lime juice can be natural but you can also buy the juice that you find in the market.

Tabasco sauce originated in Mexico as well. It is a red pepper sauce that is very popular because it is very hot and a lot of people all over the world love it. These are the only things you need to mix this shot.

This recipe is just so easy for you. That is why you do not need to spend a lot of time on this. You can also do this with some of your friends during the party. It will be fun. Just pour ¾ shot of tequila in a shot glass. Top it off with lime juice, splash in Tabasco sauce and you are all set to shoot!

This is just one of the recipes you can prepare that will surely blow the minds of your guests. They will surely have fun and for sure, there will be another party in your house. Just make sure you get to prepare good food too! Remember as well that you are responsible for the possible things that might happen during the party.

Matched Phrases Total Matched Phrases / Total Submitted Word Count: 306

Google Results Foun d

Yahoo Results Foun d

0% (0/19)

0% (0/19)

10. How to Turn Your Electric Air Freshener into a Bug Killer Tired of the awful smelling bug sprays that leave the room smelling dreadful? Or are you worn-out of hurrying up to where it’s stored and running around after the annoying bugs? If so, then you definitely have to do something about it. So let’s make your life simple and good smelling by turning your electric air freshener into an amazing and hassle free bug killer.

Just grab that bug spray, and your electric air freshener with a half empty or almost empty perfume. Once you already have both, then you are ready to go.

1. Detach the perfume canister from the whole the air freshener. Disengage it from the part which has the male plug.

2. Next, uncover the bug spray and remove the spray cap off the top of the can.

The spray cap is the plastic part where the liquid sprits out.

3. Now take the empty perfume container and position its tube right into the spray tube of the bug spray.

4. Apply pressure to the bug spray to exert the bug spray fluid out and into the perfume container.

5. Now that the perfume container both has the bug spray liquid and the perfume in it, shake a little to combine the two liquids well into one.

6. Insert back the perfume container into the air freshener. Make sure that the intensity level of the air freshener is at the lowest.

7. Plug the air fresher back into the outlet.

Just be careful in manipulating with the bug spray and don’t let it get into your eyes.

You’ve just turned your electric air freshener into an amazing and hassle free bug killer. So now, all you have to do is sit back, relax, and enjoy a good-smelling and bug free home.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/20)

0% (0/20)

Word Count: 310 11. How to Make Inexpensive Solar Panels from Broken Ones Those broken solar panels might look useless and scrap, but did you know that you can still make good use of them? Yes, you read that right. There still is a future in that rubbish looking solar panels. You can solder that broken pieces together and give them new life. Here’s how: You’ll need a couple of broken solar panels, you can buy some over the internet at low prices, a low-temperature soldering iron, a silver bearing iron, rectifier diode and several thin copper wires, hobby knife, old picture frame, scrap paper, 2 rechargeable batteries.

1. Gather around the broken pieces of solar panels and arrange them piece by piece.

2. Test with a capacitor each piece to see if it works fairly well. You should see to it that the pieces produce power.

3. Once you’ve narrowed down on the best pieces, rub a hobby knife unto the white surface of the solar panel until it appears to have a shiny coat. This would help the pieces bond together.

4. Heat the soldering iron and begin hooking up the panels in series to get more voltage.

5. Solder the rest of the panels together continuously until all the pieces are connected. On the first and last panel, you’ll need to solder both sides together forming a circle.

6. Grab the old picture frame. Remove the picture and place a piece of scrap paper on the back side for support.

7. Position the panels into the frame and seal it shut.

8. Solder the diode and the batteries.

Remember to be very careful especially on the method of soldering.

Now you have a new battery charger which can help you save and reduce electricity.

Just put under the heat of the sun and you’ll get fully-charged at no cost at all.

Matched Phrases Total Matched Phrases / Total Submitted Word Count: 304

Google Results Foun d

Yahoo Results Foun d

0% (0/23)

0% (0/23)

12. How to Make a Tripod Out of a Soda Bottle A camera would be real excellent in capturing special moments. That’s why it’s good to have a tripod in assistance during times when you need stable photos. But then if you don’t have one, no need to fret because with just a soda bottle, you can have a stable tripod at no actual cost.

First you’ll need soda bottle, ¼ nut, bolt, washer, and wing nut.

1. First, remove the cap off from the soda bottle.

2. Next, you put a hole through the bottle cap. Just make the hole big enough to let the bolt go through and start treading on its own.

3. Place the washer inside the bottle cap.

4. Insert the bolt through the hole. Start inserting from the inside part of the cap and let it tread unto the opposite direction. If you made the right hole, the bolt would just easily and fittingly tread through on its own. Let it though until the bolt’s head hits the washer nice and tight.

5. Let the ¼ nut insert through the bolt to secure the bolt. You should do this on the outer side of the bottle cap.

6. Let the wing nut through the bolt. Let it tread through until it sits carefully next on top to the nut.

7. Grab another washer and let it through the bolt. It should sit right next on top of the wing nut.

8. Insert the bolt unto the part of the camera where the tripod should be inserted.

9. With the camera attached to it, place back the cap into the bottle.

Just make sure that the bottle is stable enough to support the camera.

With what you’ve just created, you now have a stable and conventional way of taking photos.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/21)

0% (0/21)

Word Count: 308 13. How to Make your Own Drive-In Movie Theater Dreaming of having a romantic movie splurge where you can choose to be alone with

your date? Or do you wish to treat your family with a movie watching within the comfort of your home? Well, here is the trick. Why not make your own movie theater outside your home? And for a romantic touch watch them inside your car’s comfortable couch.

The things you need: 1 DVD player or Laptop 2 Projector 3 Extension wire 4 White wall or large drop cloth 5 Additional plug-ins Procedure: 1. Basically this procedure is just for setting up your drive-in movie theater but it would be best if you can think of better setup to make your movie watching worthwhile. You can add pillows, snacks, etc. or you could go for a backyard movie watching with chairs and tables outside. Any way you feel comfortable of.

2. If your luxurious car has a DVD player or laptop inside it, attach the projector on top of your car’s dashboard. Do the necessary plug-ins to connect your projector to the DVD player.

3. If you do not have a white wall along your backyard, attach the huge drop cloth in a wall that is empty and easy to place the cloth to.

4. Choose your favorite movie and your ready to go.

Tips and Warning: 1 The only drawback of this kind of setup is that it is not possible on rainy season. Unless, you want to watch movie with distracting rain drops. Better watch movie when it is the warmest time of the day.

2 Choose the best quality of projectors for good resolution. You need not buy you own projector. You can borrow from your school or any shops that allow renting of projectors.

3 To save on your car’s battery, turn off the air conditioner and open your windows.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/24)

0% (0/24)

Word Count: 308 14. How to Make a Light up Frisbee with Components from a Yo-Yo Isn’t it better to see lights flying in the air than just moving in an up and down direction near you? Although playing yo-yo is fun for most kids, playing Frisbee could be exciting to some. This is even considered as an effective sport to some athletes.

The sight of Frisbee flying in vibrant colored-light is a cool project to make. Here’s how to this kind of easy and fun new invention.

Things you will need:

1 2 3 4

X Acto Knife Components of a yo-yo – which includes the shaft, circuit board.

Screwdriver Frisbee (old or new)

Procedure: 1. If you invert the Frisbee, you can see an opening or hole. To open it far and wide, use the x acto knife. Insert the shaft of your yo-yo in the center properly. You can separate the halves of your yo-yo using the screwdriver.

2. Keep clear plastic inside and circuit board in both sides. Get the circuit board; put it back on the plastic. The shaft will be used to tap it out in reverse.

3. Through the hole of the Frisbee, place the first one on the top of and the other at the bottom.

4. Place in the shaft back and strongly tighten the Frisbee’s bottom.

Tips and Warnings: 1 Learn how to use a Frisbee before applying this kind of invention.

2 Proper handling of the knife must be taken note of.

3 The outward force on the Frisbee when thrown in the air causes the light up of both halves. Throw it in the right way.

4 Properly disassemble the yo-yo so you can get its components properly. Seek help from others that you know how to disassemble it.

5 Keep the purpose of playing Frisbee as fun and exercise and not as entertainment because of its lights. Concentrate on playing with it.

Word count: 419 words 15. How to Get out of your Verizon Contract without a fee Have you been feeling cheated lately? In this time of crisis even at the smallest bill change will cost you a lot. Then it is time to retrieve yourself from that situation and you can live your life in harmony.

Here are the things you need to get out of your Verizon Contract without a fee. You should have you Verizon customer agreement. If you have no tangible copy you may download it at their site and enter you code then you can have it printed the next thing you should have is your latest bill.

In your Verizon customer agreement you will read that section of our right to make changes wherein it says that Verizon has the right to change rates at any time and if the changes have material adverse effect on you are allowed to leave without paying the termination fee within 60 days after prior change notice.

What you should do to get out of your contract is waiting for Verizon to change the fee. You may not feel the changes unless you really browse through you bill. Call the customer service of Verizon and go to their cancellation Department after the prompt call. Tell them about the federal service charge and this has an adverse effect on you. They will make you go through a semi argument that you cannot just go without paying the termination fee. Here are some tips for the rebuttal of those agreements: Argument 1: they are claiming that federal service charge is not a charge they

set.

Rebuttal: point them to the paragraph about ‘charges and fees we set’. It states that federal service charge is part of the charges and fees that Verizon set.

Argument 2: they will claim that material adverse effect is not about price change. It is about the coverage change.

Rebuttal: You can change prices at any time as stated in the section in your contract and obviously it is prices that they are talking about not coverage charge.

Argument 3: Change is not a materially adverse and you cannot just change the contract.

Rebuttal: be defensive say like they don’t know what your financial status is and they cannot say what is adverse and not adverse to you. You may also use the power of percentages so they can just back off.

Before doing so, make sure you have your documents ready. You have understood the arguments and you are firm in your stand and you should be patient with the process.

Word count: 351 words 16. How to clean electronic circuit boards with solvents With the recent concerns of the environmental effects of CFCs depleting our ozone layers, it is deemed that the people should be conscious enough to use alternative cleaning methods in cleaning electronic circuit boards.

Flux residue from the soldering process is previously removed by ultrasonic in CFC based solvent chemistries. His method is harming the environment. The recent practice is to either select a no-clean flux or use post-soldering cleaning to remove the flux residue. Water, semi-aqueous solutions or organic solvents are required to clean in post soldering if fluxes which leave corrosive and/or hygroscopic residues are used. More CFCs are emitted and waste water is resulted from this type of cleaning process. These all add to environmental pollution and even production costs.

Here are methods of cleaning electronic circuit boards with semi-aqueous chemistry and with specified aqueous solutions. These solutions are both environmentally friendly. All of these are US patented.

1 2 3 4 5 6

The flux requires cleaning after soldering with deionized water, or other solvents, which generates waste requiring disposal.

A solder flux composition having as a solvent a mixture of water and one or more aliphatical alcohols.

Use of distilled water in a soldering flux.

A water-soluble soldering flux containing deionized water as the solvent.

A bacteriostatic agent may be added to a water-based flux.

A non-toxic, noncorrosive liquid soldering flux comprising an organic acid and a non-toxic carrier, such as water.

To clean the electronic boards, one may opt to use certain biocidal chemicals. These approaches may be used to lessen environmental pollution but many such chemicals

known today tend to have a very low human exposure limit and result in ionic or halide residues. It would be best to consult proper authorities with regards to cleaning these electronic circuit boards because there maybe chemicals that are harmful or equipments to use in cleaning may be too expensive. There are also shops that specialize in cleaning such equipments so you ay as well avail of their services than cleaning it by yourself and you are not sure of it. It may lead you to danger.

Word count: 393 words 17. How to build your own HD DVR In today’s world where technology has dominated homes, it feels so obsolete when you find you self logging behind form gadgets. You should not make that a problem because you can basically wake the scientist in you and create you own HD DVR. To make you home made high definition digital video recorder, here are a list of equipment you will need to set up: •

Windows machine with plenty of hard drive space and a 512MB of RAM and a good video card.

•

TV and receiver. You may use your existing home theater system.

•

TV card

•

PC DVR software

•

WinDVD

•

Winamp The standard Windows MP3 player.

•

VNC Remote PC access software

•

SlimServer Lets your server stream music remotely through the internet.

•

Various game emulators Run console game ROMs

•

Playstation or Nintendo game controllers. These work much better than PC game pads.

•

PSX/N64 to USB converter Lets you use console game pads on the PC.

•

A Girder Automation software.

•

A Cygwin and server software. This is a Linux-like operating system.

•

A Dynamic DNS service. This will help you connect to your home server using a fixed domain name if your broadband account allocates your IP address dynamically.

Some of these softwares are for free at their respective sites and some may be bought at hard ware shops and all of the listed equipments are affordable.

When you are ready with all of these materials you now need to first and foremost read all the installation procedures so you won’t get all confused when you are setting up.

Making it is to follow these steps: 1. Build the PC 2. Install the TV and receiver 3. Install the TV card and the PC DVR software 4. Install video, music, and game utilities 5. Install PSX/N64 to USB converters 6. Install and configure Girder 7. Install Cygwin and server software 8. Set up firewall and dynamic DNS service After the installation and building u you are now prepared to use your own HD DVR! Of course you have to be patient with the building process and if you want consult a friend who’s a techie so you can have someone to ask to when there are technical jargons you might encounter. This HD DVR may be one of your very own inventions!

Word Count: 388 18. How to Make Your Own Spy Sunglasses Getting your hands on a pair of spy sunglasses sold in the market can cost a lot of money. However, you can have your own spy sunglasses at a minimal cost by making it yourself. Read through and discover how you can record everything you see without people knowing it.

Things you will need In order to have a pair of spy sunglasses, you need to have the following: a micro spy camera, a pair of sunglasses, a camcorder, a soldering lead and rod, insulated thin wirings and a pair of pliers.

The spy camera can be brought at any electrical shops or online auction sites. Some auction sites offer free delivery of the item if you’re within the state or country of origin, while others charge an additional delivery fee for it.

When getting a pair of sunglasses, make sure that the camera perfectly fits and blends with the sunglasses’ color. That way it will be easily concealed from onlookers and thus you can go on recording what you see without any danger of being detected by a passerby.

Once you’ve made sure that the micro spy camera and sunglasses go well together, you can then start working on your very own spy sunglasses.

Steps 1. Modify the wiring of the micro spy camera by taking out all the mini wirings from the insulation.

2. Cut off parts of the wires that are at least three inches away from the camera.

3. Connect each mini wiring to the insulated thin wirings using a soldering rod and lead.

4. Reattach the opposite ends of the wires that were cut off to the insulated thin wirings.

5. Connect the audio and video jacks to the corresponding jacks of the camcorder, and then connect the power supply mini wire to a nine volt battery source.

6. Mount the camera and its wirings at the side of the sunglasses.

7. Check if the wirings of the micro spy camera were properly concealed at the side of the sunglasses.

Tips and Warnings When using the spy sunglasses, make sure that every single wire is concealed. This way you won’t create suspicion. Dressing appropriately can help a lot in the concealment of the whole thing. Also, make sure that the camcorder you’ll use is just the enough size to put in your pocket.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/19)

0% (0/19)

Word count: 301 19. How to make a night vision flashlight for twenty bucks These night vision flashlights allow you to see in the dark without attracting any attention from your surrounding. You can buy a night vision flashlight in department stores but if you cannot afford it, you can still have one by making your own version of a night vision flashlight. Expensive materials are definitely not required!

You can make your night vision flashlight by using either a red or green plastic wrap or your used remote control’s IR LEDS.

Using a RED or GREEN plastic wrap Things that you need: 1 2 3

Red or green plastic wrap Used flashlight Electrical tape

Steps: 1. Prepare a used flashlight.

2. Get enough plastic wrap to cover the entire end of your used flashlight.

3. Get some more plastic wrap with the same size as your first plastic wrap. You need to have a thick plastic wrap to turn the light to either green or red.

4. When it is thick enough, put the plastic wrap over the end of your used

flashlight and tape it on the side. Done!

Using an used remote control Things that you need: 1 2 3 4

Used flashlight Soldering iron Used remote control Soldering lead

Steps: 1. Open your flashlight and remove the LEDS. 2. Get the used remote control and open it. Look for its IR LEDS and gently remove it from the circuit board. Use the soldering iron in removing the IR LEDS. 3. Place the IR LEDS on the place of the original LEDS of your flashlight using the soldering iron and lead, then close your flashlight. Done!

Some tips and warnings: 1. In putting the IR LEDS in your flashlight make sure to connect the + and – terminal correctly.

2. Be careful in using the soldering iron because it can burn your skin.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/23)

0% (0/23)

Word count: 310 20. How to Make a LED pumpkin Pumpkins are in demand every Halloween. Bright and carved pumpkins are the traditional decoration during the Halloween. These pumpkins are commonly known as the Jack-O’-Lantern. Candles are often used to light the jack-o’-lantern but you can also use LED to light one. Since candles are not applicable all the time, especially when you want to take a small carved pumpkin in your office during the Halloween, using LED would be a good alternative.

Things that you need: 1

Marker

2 3 4 5

Knife Spoon Pumpkin Tirefly

Steps: 1. First of all you must remove the lid of the pumpkin. You can do this by using the knife.

2. After removing the lid, scoop out all the seeds as well as the fibrous mess found inside the pumpkin using a spoon. Be sure to scrape the pumpkin’s flesh clean then you can let it dry.

3. Use the marker to draw your desired drawing to be carved.

4.

After drawing, use your knife to carve your drawing in the pumpkin.

5. For your pumpkin’s light, use the tirefly as your LED. Drop it inside your pumpkin and presto! Your Jack-o’-Lantern is done!

Some tips and warnings: 1. Choose a large pumpkin instead of smaller ones because small pumpkins are tender and will not last long. Large and older pumpkins have a tough shell.

Pumpkins which have sturdy stems plus firm and hard flesh are healthy pumpkins.

2. Soaking your pumpkin in water with a bit of bleach in it will make your pumpkin last longer. You can also consider painting the pumpkin instead of carving it to make the pumpkin’s life longer.

3. You can use a tissue or tissue paper as a diffuser. You can place a piece of it in front of your pumpkin to have a uniform glow of the light.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/32)

0% (0/32)

Word count: 342 21. How to unlock your iPhone Cannot use your iPhone on any other carrier except AT&T? Follow these 7 steps to

unlock your iPhone.

The things that you need: 1 2

iNdependence software installer.app

Before unlocking, restore its setting to Apple factory setting then install the 1.0.2 update. Put your iPhone in a recovery mode by holding the sleep and select buttons at the same time for about 25 seconds. Keep holding until it reboots and returns with a sign: Connect to iTunes. Start iTunes and select restore.

Steps: 1. Download and use the iNdependence software to jailbreak your iPhone. Click the “Perform Jailbreak” then a picture of a jail cell will appear plus a text that says “Waiting for Jail Break.”

2. Activate your iPhone by clicking the activation tab then reboot it. After rebooting your iPhone should be activated. By this time you can check out your iPhone’s interface.

3. Install the SSH. If you cannot find it from iNdepence, you can get it by installing the installer.app from the NullRiver. This installer will download anything from the internet so make sure to set-up your wifi settings. The following should be installed in order: BSD Subsystem v1.5, Community Sources v2.5, Installer v2.63, OpenSSH v4.6x. After installing, you can now be able to SSH to your iPhone (user:root/password:dottie): ssh root@your.iphone.ip 4. Remove your SIM and copy some files (get files here http://macapper.com/2007/09/11/download-iphone-unlock/) onto your iPhone. Place the files in these locations: /usr/libexec/lockdownd /etc/termcap /bin/ice.fls /bin/nor /bin/iunlock /bin/bbupdater 5. Login to iPhone via SSH and execute the following: chmod +x /bin/iunlock chmod +x /bin/bbupdater mkdir /usr/local mkdir /usr/local/etc /bin/launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist iunlock ice.fls nor bbupdater -v

6. In SSH again run minicom –s. It will say something about no config file found, leave it. Select serial port setup then change it to /dev/modem to /dev/tty.baseband. Save setup as dfl then go to exit.

7. Type AT+CLCK=”PN”,0,”00000000″ then AT+CLCK=”PN”,2. Both should have an OK response from the minicom. Reboot then return your SIM to your iPhone and done!

Some tips and warnings: 1

Proceed to every step with caution.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/21)

0% (0/21)

Word Count: 304 22. How to Keep a Bored Indoor Cat Entertained While You're not at Home While you are away from home doing grocery, at school, or at work you do not want to make your favorite cat bored and leave her scratching all the furniture in your house. Keep her entertained with these fun-filled activities that she can enjoy with while you are leaving her at home.

Procedure: 1.

Leave the television or radio on while you are away but keeping its volume at the medium level. Choose programs with many animal characters like in the many children's show. Do not play brutal shows which feature gunshots, blood, and human torture.

2.

Place a yarn in the living room leaving 2 feet from the floor. Cats love playing with strings and pulling them. You can place milk ring or light ball around the yarn.

3.

Buy toys for cats that you can see in the malls. Make sure these toys are hard to swallow to cause fewer accidents to your cat. These toys are mostly made out of rubber such as balls. Cats love to chase around them. You may also leave small boxes or paper bags in the living room for the cat to hop in. Strange and hiding places are their favorite spots to hang around.

Tips and Warnings: · For your cat's safety, avoid small things like chip bag that can be easily swallowed. They might turn out entertaining but might cause harm because it can suffocate your cat. · You may also make your own toys for the cat. You can search the web for easy handmade toys just for cats. · Trim you cat's nail to avoid ruining the furniture. · If you have many cats in the home, maker it sure that they will not be fighting with one another while you are away. You can start by training them one by one.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/25)

0% (0/25)

Word Count: 347 23. How to Avoid Drinking at a Young Age Drinking at a young age is not new to anyone of us. Even the parents of these teenagers are well aware of this kind of situation. There are many negative circumstances that we can obtain from drinking alcohol at a very young age, such as; cutting classes, drinking as solution to problems, and leading to alcohol abuse. In order for an individual to avoid being a victim of alcohol abuse, it is crucial that one must avoid drinking while still at a very young age. Here are some useful tips to help you along.

Procedure: 1. If you are influenced by your friends to join in their frequent drinking sessions, try to avoid them as much as possible. Make excuses like your have many exams to study or you mom needs you at home. The environment you are around with can influence you a lot.

2. At times, saying no to an offer is hard. If ever you are bound not to reject their offer, try drinking in fewer portions only. Maybe around one to three glasses only.

3. If ever you feel tipsy or a little headache, it is best to stop. Do not allow yourself to get drunk. You can leave the group or just say to them that you will pass on drinking alcohol.

4. When you are attending a party, leave when the program is finished. Usually after the program many are tempted to have drinking session especially with many friends. To avoid from getting drunk, you can leave the party earlier or then again make excuses.

5. For the parents, proper guidance of your child can help. You can orient your child on the effects when drinking too much alcohol. Keep your child from negative influences of friends and classmates.

Tips and Warnings: 1. There are many health risks when drinking alcohol at a young age. These risks include breast cancer, impaired memory, spatial relationship, and causes certain injury and disease.

2. If stopping seems hard for you, seek counseling. There are a few organizations that can help alcohol abuse of minors.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/20)

0% (0/20)

Word Count: 307 24. How to Avoid Investing in Illegal Spanish Property

Reports have shown that over 1,200 houses in the green belt land are at risk when the officials of their town hall grant the permission of illegal builds. If you happen to plan on buying a property in one of the town around Spain, check for certain rules to avoid fraud settlement.

Procedure: Building your property: 1.

Check if your desired lot has a permit from their town hall and it is open for building. Some are for commercial property and are not for sale. Check also in their town hall for the land registration.

2.

Check the boundary of your lot and which of part are only allowed for building. Also inquire wheter the land has previous charges and do the necessary settlements.

3.

Sign the sales contract and before signing a notary, take first a legal advice.

4.

Secure your building permit. It is good that you seek help from a Spanish lawyer before signing any contract.

5.

When you start buiding your gouse, register it to the Spanish Property Registry. You need to have the declaration of new work. You must present your building permit, building completion, building occupancy certificates. Certificate from the bank is also needed for foreigners to avoid the rule in Spain on use of black money in non-resident.

Tips and Warnings: · If you plan to buy in urbanization, check for partial plan. Approval from the urbanism department is also needed. · If your desired lot is close to the beach, secure for permit from the Spanish Coastal Law. · The house owner must secure the licencia de obra (building license) to be issued by their town hall. · If you plan to buy from a second hand lot or property, seek for the full information on the owner and details of the property from the Property Registry in Spain.

Word Count: 417 25. How to turn a flashlight into a laser Have you ever wondered how you can get your hands on your very own laser pointer which can be used to light a match or pop a balloon? The following steps will help you have that kind of laser pointer!

Things you will need To make one, you need to have the following materials: a 16x DVD burner, a MiniMag flashlight, and a laser module.

You can get a DVD burner either from computer shops or from your extra supplies.

The flashlight is common and can be found in your hardware or home improvement stores. The laser module can be secured from online stores or in some cases hardware stores.

Steps DVD Burner 1. Remove all the screws that are found on the DVD burner.

2. Take out the cover or casing of the DVD burner and then remove the drawer.

3. Take a look around the laser carriage that contains the laser diode. Take out all the screws that surround it.

4. Once you get the laser diode, carefully extract it by removing all the small screws which keeps it in place.

5. After it, carefully set aside the extracted laser diode for the next steps.

Laser Module 1. Disassemble the parts of the laser module carefully. Take out the laser diode that comes with it as well.

2. Once the original laser diode is taken out, place the laser diode you extracted from the DVD burner carefully into the modified laser module.

3. Test the polarities of the laser diode using two double a batteries. That way you will have a properly working laser diode.

4. Solder longer pins unto the different poles of the laser diode.

5. Attach everything carefully in the laser module casing.

Flashlight 1. Remove the top of the flashlight which contains the ring, reflector glass and the bulb.

2. Attach the laser module housing upon the emptied top.

3. Make sure that everything is connected properly.

4. Load two double a batteries unto the flashlight and try it.

Tips and Warnings Make sure that you carefully follow the instructions stated above. Take the instructions in a pace in which you can fully understand what was being directed.

Failing to do so would only bring frustration to what you’re doing.

Another thing to remember is that the laser diode from the DVD burner emits a very strong laser light which generates heat and can cause damage. Make sure that you never point it towards your eye, to another person or pet.

Word Count: 306 26. How to install Nintendo on iPhone Remember the games you used to play in the Nintendo console? You just want to grab ‘em right? Get back to the past wishing you can still play with them. Why bother wishing when you can have those games using the technology we have right now. The games you have grown to love and make you go ga-ga all those years can turn into life with the use of iPhone. Now you can play them using your iPhone, without the long line of instructions you see from other sources! Installing the

program will only take five minutes. The following steps will tell you how.

Things you will need Before getting a copy of the software which allows you to play the Nintendo ROMS, you must first get your iPhone jailbroken by pointing your iPhone to http://jailbreakme.com/. Make sure that you access the site through your iPhone and not through another computer. Jailbreaking the iPhone is important because this will allow your phone to use third party applications. After following the instructions of the site, you may proceed to the steps.

Steps 1. Add the source markmon.mine.nu:90/iphone/repo/repo.plist. You do so by clicking on the installer icon in your iPhone and then click on the sources icon which is located on the bottom right.

2. After adding the source, refresh the page.

3. Go to the games tab and then you’ll find “nes games pack”. Install it and then restart your iPhone.

4. After restarting, enjoy the games which were unpacked from the installer!

Tips and Warnings As stated previously, you have to make sure that your iPhone has been jailbroken first before trying out the steps. That way everything will just go smoothly.

You will never get bored again and get back to the old days where you have played and went crazy on Nintendo through iPhone.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/23)

Yahoo Results Found 0% (0/23)

Word Count: 442 27. How to become a Real Estate Appraiser Real estate appraisal -- a term which is also known as property valuation and land valuation. It is basically the carrying out of the development of an opinion on the value of a real property, which is usually called the market value. An appraisal is most of the time done by a certified or licensed real estate appraiser. In other countries, the appraiser called the property valuer, land valuer or even the valuation surveyor in British English. Some people say that being an appraiser is definitely one of the most-liked jobs in the entire world. What they do not know is that being an appraiser entails a lot of things; you'll have to use all the skills you've learned in math and in your personality management class. You are even forced to use your detective and spying skills. Only the best in the field can become a good real estate appraiser. So how do you start being the best?

1.

First and foremost, you should get your very own trainee license. Research on how you can get one and list down the classes you should take in order for you to pass the needed requirements. There are several online schools that provide classes for those who need to get their trainee license.

2.

After you've finished researching on what you should do to get your trainee license, you should begin putting everything into action. Finish everything from completing your classes to taking and passing all your tests, and making sure that you get appraisal work experience.

3.

A good teacher can always help you reach your goals - therefore, the next step includes finding at most two appraisers that can teach you both the new and old tricks. Being an appraiser can be really challenging, you'll need all the supervision you can get.

4.

If you can, try to snag a trainee position in a real to life appraiser's office.

Through this, you will be able to experience the day-to-day activities of a working real estate appraiser. And you will be able to learn how to deal with challenges and how to achieve certain goals in the real corporate world.

5.

Find good friends that you can use as part of your network. Search for a good loan broker that you can possibly obtain work from. A strong relationship with a good loan broker will take you places.

In trying to get your trainee license, you need to spend - so be prepared to work like a dog and get paid like a rat cause you'll have to make ends meet until that time when you become a professional real estate appraiser.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/14)

Yahoo Results Found 0% (0/14)

Word Count: 310 28. How to Buy Seized Properties at Auction You're tired of working extra hard for that long Christmas wish list you hope to reward yourself. You think of different ways you can possibly earn extra for yourself.

Actually there are a thousand things you can do to earn more than what you are earning at present. All you have to do is broaden your horizons, think far and wide, and then you'll find a lot of different answers on how to earn extra cash - and then you think of buying seized properties and you think of how you should do this kind of business in case you do decide to push through? Here are simple steps that you can take for you to be successful in buying seized properties in an auction.

1.

Begin by talking with your town's police station and ask where you can possibly find seized properties to be auctioned.

2.

You can also try looking through the newspaper and check out if there are any listings placed on the ads.

3.

As soon as you arrive in the place where the auction is said to be happening, sign in and compete whatever procedures the sponsors are requiring.

4.

Make sure you have enough money - start by bringing with you several thousands of dollars. After thorough analysis and thinking over, decide which seized property you want to buy and think of the reasons why you want to buy it.

5.

As soon as you finish buying the property, think of whatever plans you think are necessary to renovate and improve the said property.

As said above, it is best if you stuff loads and loads and loads of money into your pockets and bags. And you should take note that some properties might be

dilapidated. They could also possibly have contrabands depending on the crime the previous owner had or was charged with.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/18)

Yahoo Results Found 0% (0/18)

Word Count: 411 29. How to Choose a Home Inspection Company Everybody dreams of having his or her own home in the future. In fact, it's a wellknown part of the famous term -- the American dream. But choosing and maintaining a house can be a really difficult and stressful job. The hard part comes right after you buy the actual house because the inspection procedure is the hardest part of having a new house. But take note that this is also the most important part of the process. In selecting an inspection company, many things should be taken into consideration; things that you should also be very much aware of so that you will be saved from all the financial expenses and proverbial headaches in the following years.

First thing you should keep with you during this research is a list of all suggested inspectors from your friends, colleagues, and family. Along with the list should come the price estimates for each inspector and of course, the usual and default stuff you should have with you - the pen and paper.

1.

Before starting your own quest of looking for an inspection company, you should try asking your realtor if he has any company that he can recommend to you.

Most mortgage brokers have several home inspectors as friends and they could most likely give you names of good ones.

2.

Research and know about ASHI or the American Society of Home Inspectors.

You should ensure that your choice of home inspection company is a certified member of this organization, that way the quality of service can be guaranteed.

3.

Before you narrow down your choices to just one home inspection company, you should also try to check and compare all the prices of other home inspection companies so that you could choose the best price that'll suit you.

4.

Get to know your home inspector, be ready to meet the company and make sure that you establish a working relationship with them. Ensure that you will be present during the day of actual inspection.

5.

Never be afraid or ashamed of asking questions - asking questions is a way of telling the company that you are on top of this transaction and you want to be included and informed of whatever problems the inspector will see during the procedure.

You should always try to understand the inspector's comments and report. And when you see the logic and you understand the history of such feedback, try to follow the inspector's advice.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/25)

0% (0/25)

Word count: 310 words 30. How to Find Motivated Sellers when Looking to Buy Real Estate Real estate is a legal term that encloses land together with anything attached to— anything stationary. A lot of people want to invest on real estate but the big question is how will they find motivated sellers? Newbies on real estate do not know how to find the motivated sellers. This is not a problem. Below are some tips on how to look for motivated sellers. You really have to do everything. Do not just pick out randomly on the list.

1) Go to your local Real Estate Investment Association. Attend their meetings so that you will have a connection with them. Observe what other investors who are active are doing.

2) Make bandit signs with your contact information on them. Put them up somewhere visible to everyone.

3) Find active property scouts and contact them. They surely can help you as well.

4) Find everything around you that you think will be of use. Advertise everywhere—the newspaper or the net. The internet is more preferable since it is very accessible to everyone and if it is not for free, you only pay a little to post an ad in the net. Plus, a lot of people will surely read your ad.

5) Post plasters that say that you buy houses everywhere you go. This is to ensure that everyone will know including the ones who do not have access to the internet.

6) Tell every person you meet everyday that you are looking for a house— salesclerk, gasoline station staff, food chain staff, electric meter reader, neighbors and everyone else.

7) Coordinate with a realtor. He will surely help you.

These are just some of the best things to do in finding motivated sellers. If you can come up with better and effective ideas, go for them—it is the best time to invest on real estate nowadays.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/24)

0% (0/24)

Word count: 348 words 31. How to Profit from a Falling House Market After World War II, average homes have already increased in value up to about double its price every ten years. This is very hurtful for you especially if you have saved a lot of money on your home and you realize that you lose thousands and thousands of the value of your home but never lose hope because here are some ways on how to profit from a falling home market.

1) Purchase really affordable property. By property developing, you can also get money out of falling market. The media panic is a good thing to negotiate a

nice bargain. Offer the asking price immediately if you see that what you are trying to purchase is a bargain. Offer the best price you can offer. The real estate agents will know when you have reached the limit.

2) Show that you are well-organized and you know your market well if you want to attract them with your offer. Let them know that you have researched well on properties. This way, real estate agents will know that you are really serious and you can never be fooled. Just make sure that you make the necessary researches.

3) If you have already bought the property, make sure you add up real value on it. Improve the areas that will surely attract a lot of buyers. Repaint the areas that you think will need some improvement. You need not to use a lot of money. You can even do this on your own with your family.

4) If you are worrying that the value of your property is falling, make a bet on how much it will drop down. You can make money out of this. If you think this is not available in your country, ask for some advise from your financial adviser.

The best thing you should do is to research and never panic. Do not sell your home at a very low price. You can also rent your house to other people. During a fall, many prefer to rent since mortgage is too high for them to pay.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/13)

0% (0/13)

Word count: 303 words 32. How to Determine if There Is a Housing Bubble in Your Neighborhood Housing bubble, also known as real estate bubble is a phenomenon in the real estate industry that is characterized by the fast increase in values of real estate properties such as housing to the point that they are already unsustainable.

Nobody can ever predict what will happen in the real estate economy in your neighborhood but you can research, observe and study carefully the potential bubbles.

Here are some ways on how to determine if there really is a housing bubble in your neighborhood: 1) Compare and contrast the cost of buying versus the cost of renting in your neighborhood. You will know that there is a bubble when the monthly mortgage payment together with taxes and insurance minus the home payments like tax deductions is much bigger than the amount of renting.

2) Ask people who you think are experts on housing bubble. You can ask a real estate agent but make sure you also ask the points of view of other people like your friends, an accountant or your lawyer since they do not have interest in convincing you to buy a house not like the real estate agent.

3) Review the history and examine how rapid the prices have risen.

4) Examine thoroughly your home market. The newspaper is a good source to

initiate your study. Check the best internet sources as well.

These are just some of the tips on determining a housing bubble in your neighborhood. If you are planning on investing on real estate by purchasing a property, make sure you really know the reason why you want to own one and you have examined thoroughly your other options. If you find signs of a bubble in your community, it is best to postpone it before you suffer the consequences of the housing bubble in your area.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found Yahoo Results Found 0% (0/23) 0% (0/23)

Word Count: 366 33. How to Lease an Office, Retail or Industrial Space If you want to start your business right, or if you want to make it prosper, looking for a perfect place can’t be that easy. It is important to choose the location wisely since it has a great effect on your business and your way of gaining income. Here are few ideas on finding the perfect location to lease.

Retail Space 1. Be patient in finding possible locations for your retail business. See to it that the location you have chosen will be visible enough in the area.

2. Select and get the prices of at least more than one location. Get hold of all the possible information that you will need.

3. It is better to look at the businesses found within the area of your desired location. Make sure that these businesses will help you stay in business rather than pull you down.

4. Get an attorney that will be able to help you review your lease contract. See to it that you are aware of the agreement you have put yourself into.

5. Be sure that all the modifications in the lease agreement are signed as well as initialed. Before signing the lease agreement, it is better to read what’s on the agreement first and verify things if there is a need.

Office Space 1. Inquire on the possible equipments you are permitted to have in the area.

2. Ensure that your desired office location to lease is a perfect location for your business and will help it become highly profitable.

3. Take into account the parking situation of the office location you have in mind.

Make sure that it is convenient for your clients and your employees.

Industrial Space 1. Check out if large trucks and heavy equipments are suitable in your industrial space to lease.

2. Inquire about the different permits and codes required. It is always better to

ask questions before signing anything.

3. Discuss if an office space and a warehouse will be both needed in your type of business. Always choose what’s best for your business.

Finding a perfect location may be difficult, but it’s all going to be worth it once your business is in good shape!

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/21)

0% (0/21)

Word count: 322 34. How to Bar flare a bottle of alcohol This article will teach you on how to bar flare an alcohol bottle. The flaring is a doing tricks by spinning the bottle usually with an alcohol bottle This can make you do great tricks in a party or something can make you be the best bartender in your place.

You need to have a bottle of alcohol. Just use a lighter one then follow the steps provided below: 1. Hold the neck of the bottle with your hand, either with your left or with your right hand depending on which side are you comfortable with, facing towards you.

2. Sway the body of the bottle away going up towards you while releasing the neck of the bottle.

3. Catch the body of the bottle with the same hand. You can see that the bottle is making a 180 degree turn.

4. When doing it succession, after catching the body of the bottle, slide your hand into the neck of the bottle and repeat steps 2 and 3.

5. If you would like to do it another way around, you can. Hold first the body of the bottle.

6. Sway the neck of the bottle away going down towards you while releasing the body of the bottle.

7. This time, still catch the body of the bottle. When doing this, you can see that it is still making a 180 degree turn.

8. When doing it succession, just repeat steps 5, 6, and 7.

Tips and warning:

1. Use light bottle when practicing this kind of trick.

2. Be sure to stretch you hand when doing the spinning of the bottle around your hand to avoid harm.

3. Be sure also not to practice in from of a person. The bottle might slip from you hand that might cause harm to the person.

4. Be alert in catching the bottle so that it will not fall down and break into the floor.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/21)

0% (0/21)

Word count: 306 35. How to Mix a sweet Peach martini The Peach Martini is one great drink. The name itselft reflects this drink of speciality.

There is no final fact on the origin and the history of the martini but the most current history is that in 1860 's a bartender, Jerry Thomas, made the drink while working in the Western hotel at San Francisco. He was the one believed to have made the first martini. Martini is named from town near Martinez.

The seasoned martini are popular in the bars through America, but is also easy to make one at your own the house too. This peach martini is bursts with fruity savour.

Learn how to make your own flavored martinis in your own comfort.

Things you will need: 1.

2.

3.

4.

5.

A glass filled with ice Cocktail shaker Vodka Peach Puree Cocktail drinking glass

Here are the steps: 1. Pour a half glass of vodka into the glass filled with ice 2. Then add a half glass of Peach Puree.

3. Cover the top of the glass with Cocktail shaker then shake the liquid inside so that the vodka and the peach puree will be mixed properly.

4. After mixing, pour the mixed vodka and peach puree into a cocktail drinking glass.

5. Add lemon twist or a maraschino cherry to make it look great and presentable.

Tips and Warning: 1. Peach Martini contents needs to be separately poured inside the shaker, and should be above the ice.

2. The quantities of the ingredients needed may to cause confusion. All you need to do is to use correctproportion of the ingredients that you will be using for

you to make the best authentic and original receipt! You may use a die, cup ,or a jug (if you will be making this receipt for a group) when you will make a Peach Martini.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/20)

0% (0/20)

Word count: 310 36. How to chill a beer in 5 minutes or less Your friends are arriving in less than 6 minutes and you have just realized that you forgot to put all the beers inside the fridge. Bet you will start to panic, right? Well, there is absolutely no need to start panicking. Why? Because you can chill all the beers in just 5 short minutes or even less!

The water plus ice plus salt mixture lowers the temperature at a point that the mixture will freeze. Salt water solution freezes at a much lower temperature compared to just pure water. Exactly about three or four degrees lower.

Things that you need: 1 2 3 4

Cooler or any container will do Water Ice Salt

Five simple steps to chill a beer in five minutes or less: 1. Get and prepare the cooler. You can use any container if you do not have a cooler, as long as the container is large enough to fit all the beers you have.

2. Fill half of the cooler with water. Be sure to leave enough space for all the beers to fit in.

3. After filling it with water, add all the ice in the cooler.

4. After adding the water and ice in the cooler, get and add the salt. Pour about two cups of it in the cooler then stir.

5. When you are done with the stirring, get all your beers and place it all inside the cooler.

Just five easy steps and presto you have a cold beer! You can chill your beers in approximately 35 degrees in five minutes or even less.

Some tips and warnings: 1

Prepare a hand towel near the cooler so that your friends can wipe the wet beer bottle dry.

2

Do not put too much water in the cooler so that when you will add all your beers the water will not overflow.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/25)

0% (0/25)

Word count: 313 words 37. How to Make Your House a Better Place for Animals Animals really need tender care from humans. They find it comfortable when humans pet them, feed them and let them drink. Your homes make a good second home for animals. If you make it a better place for them, they surely will love you more. Try to do some of the following steps on making your home animal friendly.

Steps: 1) Buy a bird feeder. If you can not afford or find one, make your own. It is less costly.

2) Study on the different things that are beneficial or bad for animals.

3) Try planting more trees or plants at your backyard. Plant the ones that are not on your yard yet.

4) If tall trees already stand on your backyard, plant some that will surely be as tall as a human but shorter than the trees that already exist in your backyard.

This will provide home for other animals that do not live in the taller trees that exist in your yard. By making different kinds of habitat, you attract different species of birds and different animals as well.

5) Since animals need food, you need to plant different kinds of plants that provide food for them.

6) Always keep the homes of the animals tidy, secure and of course, animal friendly. It should be in harmony with the surroundings and the nature as well.

7) Animals need water, too. That is why you need to provide them a source of water. A lot of animals, as well as insects, will appreciate this source of water.

8) Keep on giving animals a warm welcome to your home. They will serve as your pets at home. Provide them with a lot of food and they surely feel good and comfortable at your home.

Just remember not to make use of things that will hurt the animals. Your house should be animal friendly.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/25)

0% (0/25)

Word count: 301 words 38. How to Make a Bed for Your Pet Using a Pillowcase Pets have been a part of the family already. You give them food and care for them everyday just to make them live longer. If you care for your pet that much, it will be very loyal to you. You can do a lot of things for your pet. A good thing that you can do is to make a bed for it. Pets love comfortable places to sleep in.

Making a bed for your pet is just so easy. You do not have to spend much. All you need is just old pillowcases and you are all set to make the bed for your pet. This only takes about 30 minutes. This is also a fun bonding time for your family.

Steps: 1) Fill in your old pillowcases with clothes that you do not wear anymore. If you have none, you may use rags.

2) If you have a cat, the pillowcase can be added with catnip. This attracts your cat to bed.

3) Close the end of the pillowcase by sewing it. Make sure that the rags do not go out of the pillowcase.

4) The bed is now ready for your pet to use. It will surely enjoy its new bed.

5) Do the same methods with the other pillowcases. You may also add your own designs on the bed. You can sew the name of your pet on the pillowcase to make it more customized.

Make sure you do not add up materials that are toxic to your pet. If you have a dog, do not use catnip rather, a pennyroyal is a good idea as long as it is dried in order to keep fleas from attacking your dog. Just make it a point that your dog will not chew it since it is very poisonous.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/18)

0% (0/18)

Word count: 330 words 39. How to Help a Pet Get Used to a New Baby Everyone loves to have a baby in the house. It is just so adorable and that baby is considered the angel of the family. It is not that easy to adjust with the new situation. There is a big difference since another member of the family is born. You should let others, like the siblings of the baby, get used to the situation and of course, the pets should get used to it as well since they have to live with the fact that there is a new member. There are some situations when the pet will be scared that is why the bonding between the two should be gradually done with your aid and the aid of the members of the family.

1) The initial thing to do is to let your pet sniff and touch the things of the baby.

Do not scare the pet away if there are toys or clothes of the baby. Just make sure that you will not let the baby use them after letting the pet get a feel of those things. This is a good start since it lets the pet get used to the scent of the baby.

2) Carry the baby with you and try to walk with the pet on your side. Just make sure that you do not let the pet get a direct contact with the baby. Like what was aforementioned, this should be done gradually.

3) Be a good observant on the situation. You are the best judge as to when is the perfect time to let them both have a direct contact with each other. If you do not see a positive reaction, it is best to keep your baby away from the pet until both of them adapt to the situation.

Be patient enough when trying to make them adapt to the new situation. You should persevere since this situation is hard to handle but when done properly, you really will feel the difference.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found Yahoo Results Found 0% (0/21)

0% (0/21)

Word Count: 385 40. How to Help a Pet Get Used to a New Baby If you have your new born baby at home and you have your favorite pet as well, help your pet get used to your baby with these simple ideas. First, prepare your pet in advance to ensure that your pet will be all set to live at home with the presence of a baby.

1. Make it a habit to take your pet to a veterinarian to ensure that he is always healthy and will bring no harm or disease before the baby is already at home.

This is one way to be sure that your new born baby is safe and your pet is totally harmless.

2. While you are pregnant, prepare your pet ahead of time. Provide him an exclusive spot that will be his area alone. Let your pet get used to the area you have prepared so that he will get into the habit of staying away from the baby especially when the baby starts to crawl.

3. Let your pet be familiar with the room of the baby. Lead him to the place where the little one will be sleeping. This is of course applicable if you do not want the room to be off limits to your pet.

4. It is a perfect idea if you are attentive to your pet’s behavioral problems before the presence of the baby. Ask some neighbors with babies to come over to your house and carefully observe how he acts and deals with his concerns.

5. Make your pet’s training light. It is a good idea if you provide special treats for your pet if he responds well.

6. Engage in playing baby movies or sounds before baby is born. Help your pet get used to these noises as well as to baby’s musical toys.

7. Practice carrying your baby around the house and apply lotion or baby powder

to get him used to the smell.

8. Do not spend much time on your pet to get him used to the fact that you can’t spend much time when the baby is already at home. Spend only a few minutes so that he will have a more time alone.

Now you have these simple, achievable ideas. You can now prepare your pet for the presence of a new born baby at home!

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found Yahoo Results Found 0% (0/17)

0% (0/17)

Word Count: 300 41. How to Use your Dog for Therapy If you have a dog at home, then it can be a good therapy for you. You can always have the option to use your dog for a therapy so that you will not be encounter loneliness and depression. Although it may need some training and great effort, here are simple ideas on how to make use of your dog for therapy.

1. Train your dog very well to be obedient. They must undergo this training since they are often with young kids or with elder people.

2. Take your dog to a veterinarian to be able to examine if your dog is healthy and safe to be with. If you want to register your dog for any therapeutic reasons, be sure to submit a copy of an exam to prove your dog is really in good shape.

3. Fill in any application with one of the well- known organizations for national dog therapy if you want to apply a therapy dog. You are of course requested to take and complete a test with your dog to be sure that your dog is welltrained and has a good behavior. Always make it a point that as your dog’s trainer, you are always in control of your dog all the time. If you have passed the test, then your application will be approved. You will now be asked to give a set fee to be part of your chosen organization and be certified.

4. Find a good environment for your dog to work. There are a lot of environments that would be possible to use. Identify what place works best for your dog. Therapy dogs can be of great help for children that experience difficulty in reading.

There are actually a number of reasons why dogs can be good for therapy.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found Yahoo Results Found 0% (0/21)

0% (0/21)

Word Count: 324 42. How to Travel by Car with Your Dog

Traveling to places with your dog’s company can be very fun. But you cannot deny the fact that unpredictable dangers may happen when your dog hangs his head out of the car’s window. It is always best to prevent any possible injuries and be safe at all times in the car while traveling. Here’s what you need to do.

1. Provide a halter and let your dog wear it on so that you can control him without problems. If your dog is larger, use the type of harness that will be best for your dog.

2. Position your dog in the carrier properly with your dog’s favorite blanket on and any container for water. Always make use of blankets that fit the needs of your dog.

3. Be sure to check that your carrier with your dog in it is safe and secured. It is always better to read the instructions to prevent any injuries.

4. Find areas for resting where there are designated pet areas. Use the time to relax for a while and find a restroom that you can use after several hours of driving. Do the same thing for your dog. Let your dog out of the car for a few minutes.

5. Plan ahead of time the packing food for your dog. If you are left with no choice, buy a burger from any fast food place that you will encounter.

6. Always put in mind that your attention should be on the road. Never let your dog distract you, nor let them behave improperly in the car. If problems occur, make sure to pull aside rather than keeping your attention away from the road.

These are the things you need to do while traveling to places with your dog. Always remember that if you want your travel to be safe and fun at the same time, it is always advisable to set things first before going on a trip.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found Yahoo Results Found 0% (0/21)

0% (0/21)

Word Count: 314 43. How to Treat Your Girl Dog like a Princess

Dogs are known to be man’s best friend for the fact that they are at all times fun to be with and helpful in a lot of ways to the life of humans. Dogs are not only source of happiness, they are also considered part of the family. It is time to treat your girl dog as a princess. Here are some ideas:

1. Give your dog a treat by providing her an own room. In this way, she will truly feel special with all the princess bed and toys that you have prepared in her room. Decorate the room that fits her taste. Things used should be of her favorite color.

2. Plan a spa day for your girl dog. You can make a homemade spa on your own or take her to a spa salon and pamper her. You can bathe her, brush her hair and even paint her toenails that beautifully match her bows.

3. Acquire a car seat for her for traveling so that she will be able to sit beside you. Let her be in style as you take her along in your trips.

4. You and your dog can eat dinner together. You can either prepare a small table setting for her or let her sit beside you on your table. Prepare healthy and delicious foods for her to truly enjoy the dinner you have planned. It is always a good start if you buy a cookbook and prepare recipes that are approved and accepted by veterinarians.

5. Take her to the mall for a shopping extravaganza. Give her a formal party dress just in case she will need one. With this, she will undoubtedly feel like a princess.

After you have accomplished doing these things for her, it is really no doubt that your dog girl will truly experience what it feels like to be a princess!

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/18)

0% (0/18)

Word Count: 309 44. How to Stay Calm When Your Dog Gets Lost You look inside the house, then outside the house. The moment you realize that your pooch is gone, your heart starts to beat faster, and your mouth suddenly turns dry as you take on the fast track to panic… What should you do?

First of all, don’t panic! Breathe in, breathe out, and then think clearly about the following steps you should take when your dog gets lost: 1. Your pet records should be kept up to date. It would be really helpful if your dog has a name tag on his or her collar; that way, people who find your dog can recognize the name when you start looking.

2. Contact those who can surely help. Let your veterinarian, your friends, family, and the animal rescue centers in your area know that your dog is missing.

They are sure to have suggestions, and of course, the rescue team will be able to do a lot for you.

3. Talk with the insurers. You can use your dog’s insurance money to mass produce ads and as a reward for the finder.

4. Post notices all over the neighborhood or even farther. You can put up the notices for free, though some shops will want to have a little payment in return… which is fine with you, right? All for the dog!

5. Don’t hesitate to ask around. It’s important to let your neighbors know that your dog has disappeared, because they might have seen something, or they might see something in the future. Just ask to be informed as soon as

possible.

As you keep the steps mentioned above in mind, also keep in mind that most pets that get lost come home on their own; and it has happened a lot that these pets have been found, so it is best to remain calm during the whole process.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/30)

0% (0/30)

Word Count: 348 45. How to Approach a Shy or Fearful Dog When a dog is hesitant to let you come near, what can you do? Remember, your movements and your body position can contribute largely to making the dog relax.

You have to avoid appearing as though you are a threat to him or her, lest they keep trying to get away from you.

Don’t force your presence upon the dog; it can make the situation worse. Consider the following steps listed below instead: 1. Give the dog a chance to come to you on his or her own. The dog must not feel forced, otherwise, you will never be able to get his or her trust.

2. Do not face the dog. Facing your dog in a forward manner can speak of confrontation. You should turn partially to one side, including your head. It will make the dog feel calmer.

3. Do not ever, ever stare. Don’t give your dog a hard stare, because animals consider it a threat to be stared at. Tell your kids that, too, to avoid danger.

4. Avoid hovering. Don’t lean over a dog, it makes them defensive. The last thing you want is to have bite marks on your face.

5. Pet at the right time. Keep off petting when you are still approaching the dog.

Dogs find it sufficient reason to be alarmed when they see a hand coming down upon their heads.

6. Stoop when you want to pick the dog up. People often swoop down when they want to pick the dog up. Instead of swooping, stoop. Slow, indirect movements are less frightening to the dogs, especially the small ones. Crouch down as a first step.

7. Check your smile. Showing your teeth may be translated by your dog as a threat. He or she is part of the animal kingdom after all. When you smile at dogs, keep your mouth closed.

It is also important to know that growling is a sign that the fearful dog is uncomfortable. Do not punish the dog for it! Give the dog some space and just ask tips from a professional trainer.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/22)

0% (0/22)

Word Count: 310 46. How to Remove Ants From Cat Food Just like you, your cat wouldn’t want to eat food that has ants crawling all over it.

Aside from robbing your cat of his or her full enjoyment of the food, it can cause your cat to not eat. You wouldn’t want that! It’s your responsibility to watch over the needs of your pet, and of course, to feed them is a necessity. What would you do if you lose your pet due to neglect? It would be unpleasnt. Not to mention inhumane.

What should you do when there are ants in the cat food? Eating is supoosed to be a pleasurable thing, not a bother. Follow the directions given below, to help your cat obtain satisfaction from his or her food: 1. Remove the ants that are already in your cat’s food bowl.

2. Wash the bowl.

3. Get a container that is shallow but wider than your cat’s food bowl.

4. Fill half the container with water and place the shallow container in your cat’s eating area.

5. Put your cat’s food bowl at the center of the shallow container, unreachable by ants, as long as your cat can eat from it without difficulty.

6. Refill the bowl with fresh cat food.

7. Take care of the shallow container every once in a while, adding in water when needed.

8. Maintain the process until the ants go away.

9. Always remember to wash the food bowls.

10. If the ants persist, find another area where you can feed your cat.

If you don’t have this problem yet, keep your cat’s feeding area clean; this way, it won’t attract ants to move in. Make sure there are no pieces of cat food scattered outside the food bowl. And if your cat is finished, wash the food bowl so that there will be no leftovers that can lure the ants.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/21)

0% (0/21)

Word Count: 311 47. How to Use an Onion to Deodorize a Cat Litter Box Does your cat’s litter box smell a little bit awful? What many do not know is that a great solution to putting off that smell from your cat’s litter can be found just right in your kitchen. You definitely heard that right, and you might think it’s a bit ridiculous but there actually is a science lying behind the idea. It’s the same chemical in onions that make you cry which reduces the bacteria that cause cats’ urine to smell.

First grab any onion you can first get your hands on. It doesn’t matter what kind whether red or brown. But most often, the red ones tend to be more expensive, so getting the brown would be much preferable. You’ll also need a knife.

1. With your knife, cut the onion down its equator making two halves. Doing so exposes the maximum cut surface. You may also cut the halves into smaller half.

2. Remove the external layers of the onion’s skin. Doing this avoids the skin to flake off and create a mess when you move on to the succeeding steps.

3. In the room where the cat litter box is located, place the onion halves in a safe place near it. But do not let it be visible to the eyes. You may hide it by putting it inside a small box or bowl. The onion works against the urine smell.

The thing that makes your eyes throb when you cut onions eradicate the bacteria found in the air that make the urine smell awful.

4. Remove the onions when the room no longer smells awful, or when they are deteriorating.

Be extra careful when cutting the onion with a knife. Onions are deadly to cats, so make very sure that you don’t let them ingest the onions.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/19)

0% (0/19)

Word Count: 307 48. How to Make a Harness for Your Fat Cat Cats do need do leisure time to walk around and play with the other cats around the neighborhood. It would be healthy to take him around for a walk by putting on a harness around him so he will be easy to handle. But what if your little feline friend is not too little at all? When the harness from the pet shop is just too tight for him?

You might just have to be a little creative by creating a harness for him on your own.

You’ll need an old skinny belt about 1/2 wide, a utility knife, needle, thread and leash.

1. Cut about 2 inches from the end of the belt, the part that hangs when you tie it on yourself.

2. Make a small loop by sewing the little end together, the one which you cut off.

3. Insert through the small loop the two ends of the belt. Doing so will let you have a big loop on one side of the small loop and two loose ends on the other.

4. Let your cat’s head into the big loop and position it properly by adjusting the size of the belt in a manner that he is quite comfortable. The mini loop should be positioned at the back of his head.

5. Cross the two loose ends and insert them through the small loop right behind his front legs.

6. Secure the belt using a buckle to the size fit for your cat. Fasten it tight but just right enough so he won’t choke.

7. Attach a leash to the small loop.

Make sure that you use the right size of belt. The wrong size will make your fat cat feel stiff and uncomfortable. Be careful in using the knife and the needle.

Matched Phrases

Google Results Foun d

Yahoo Results Foun d

Total Matched Phrases / Total Submitted

0% (0/23)

0% (0/23)

Word Count: 312 49. How to Make a Cat Scratching Post from a Log For the feline race, scratching feels blissfully pleasant. But for cat owners, their scratching is definitely a not so blissful experience especially when they go scratching around on expensive furniture. But we humans just can’t deprive them of this habit.

Since doing so would only make them find their own places to scratch, places that you won’t like. So better let them have a perfect place by giving them a scratch post.

But most scratch posts out there are quite expensive. So try making one of your own.

You’ll need a piece of plywood, a 3 feet high clean and solid log, 4 ½ inch wood screws, drill, drill bits, carpet that is the same height as your log, sandpaper, stapler, and catnip.

1.

2.

3.

4.

Look for an appropriate log. One that is dry, and insect-free.

Clean the log by dusting off the dust, dirt, and other particles.

Sand the base of the plywood which will be used as the base for the log post.

Determine the best position for the log. When you’ve decided on which way you want it to stand, attach it to the base with the screws using the drill.

Make sure that it stands in a sturdy and secure position.

5. Wrap around the carpet to your post. With your stapler, staple the loose ends of your carpet into the secure parts.

6. Introduce your cat into his new cat post. He may not recognize it at first. So rub catnip around the post or over it. If he loves the smell and approaches the post, he will eventually get used to it and habitually recognize it as his scratching post.

Check for insects before fetching the log into the house. Sand the base properly to avoid pieces of wood piercing into your cat’s paws.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/23)

Yahoo Results Found 0% (0/23)

Word Count: 444 50. How to Volunteer Time at the Animal Shelter You have the zoo and all the beautiful animals in it. There are caretakers and zoo keepers who ensure that these animals are taken care of. But what about all the other animals like the stray dogs and little kittens in the animal shelter? Though there are a lot of persons running the shelter, having you as a volunteer will undoubtedly help them achieve more of their goals at a shorter time. And at the same time, you would be able to spare a little time and give service to nature. But then, you ask, how can you become a volunteer in an animal shelter? Here are simple guidelines that will hopefully help you in your generous quest.

1.

Remove all traces of shyness - this will get you no where closer to your goals.

Converse with the animal shelter owner or any employee and ask how you can offer your volunteer services in the particular animal shelter. If you are talking to an employee, he will surely be the one to discuss with the owner if ever the owner is not available during your day of inquiry.

2.

Study their available schedules and work out one that is best for you. Maybe you can choose a schedule right after school or work? You can also try having it on the afternoons during weekends. The owner or your supervisor will discuss with you the particular things you'll have to do at your scheduled time; things like grooming the animals through bathing them, playing with them different games for physical exercise and many more.

3.

Don't be disappointed when the owner will tell you that he or she is not accepthing any volunteers as of the moment. Instead, politely leave them your name and number so that in case they already need a volunteer, they know that you're interested.

4.

Other than actually volunteering your time to the animal shelter, you can also donate a little bit of your money. You can also consider adopting a pet from the animal shelter for a home companion. Choose an animal pal that will suit your lifestyle and personality.

If you're thinking that volunteering in an animal shelter is all about glamorous animals and running around with cute little cuddly puppies, then you should reconsider volunteering. Working in animal shelter involves nasty work like cleaning up animal poop, taking care of cages and other animal play things and many more.

You should also remember that when you volunteer your time to an animal service, you should not expect any pay. Keep in mind that in any type of volunteering, you are wilingly offering your services - without pay.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/18)

Yahoo Results Found 0% (0/18)

Word Count: 381 51. How to Prepare Animals for a Show Some people prefer to show off their jewelries or their baseball card collection or their stamp collection as their most prized possession in the world. But there are people who value their pets most; these people spend lots and lots of hours training their dogs and cats and parrots and etc. how to impress other people and how to make other people see that with the power of the human brain and perseverance of a human being, you will be able to teach ordinary animals how to become extraordinary. People across the world take their pets to country fairs or local pet shows to show off their beautiful pets and their special human-like talents. Here are easy steps followed by animal experts to guide you in your first ever local pet show.

1. Appearances matter in shows like these – make sure you’re pet is looking extraordinarily beautiful during the event. If your pet is a dog, bathe and brush its hair before the show starts. Sold in malls around the country are dog shampoos and conditioners that will bring lighten up or bring luster and shine to your dog’s fur.

2. Proper hygiene should also be followed – this rule is not only for humans but for celebrity animals as well. Always remember to trim your pet’s nails. Judges are

not very fond of hearing your pet’s feet go rickety-clop on the wooden stage as your pet walks on the floor.

3. Do extra researches on your pet’s best breed characteristics – judges most often look for the best breed out from its flock. So if you have the best-looking dog or best-looking cat from its breed then your pet will most likely take home the prize.

But if your pet is not of pure breed, then you should stick to general appearance and the animal personality.

Before you decide to make your pet join pet shows and country fairs, you should take into consideration your pet’s health history. Has your pet undergone proper worming medications, anti-virus vaccinations and appropriate antibiotics. That way, you can ensure a healthy and proper lifestyle for your pet. Also make sure you know how much to feed your pet and if your pet is becoming more and more overweight – being fat doesn’t necessarily equate to being healthy.

Matched Phrases Total Matched Phrases / Total Submitted

Google Results Found 0% (0/19)

Yahoo Results Found 0% (0/19)

Word Count: 401 52. How to Make a Natural Flea Repellent Powder has the paper termites that you have to ward off to keep them off your beloved stamps. Jewelry you have the most dangerous predator as your pest - human burglars and thieves. Naturally, having a pet also entails to having pests you have to ward off- fleas. Getting rid and removing fleas from your pet can be pretty tricky and really hard. And so you spend lots and lots of money to buy the most expensive flea repellent powder to ensure that all the fleas leave your beloved pet's beautiful fur.

But what if you found out that you can actually have a homemade flea powder that costs less but is equally effective? All you have to do is follow this quick recipe and whip up a less-cost flea powder for your dogs and cats. But you should also understand that removing fleas cannot be a 100% dependant to flea powders, you should also take into consideration the cleanliness of your pet's environment.

Things you'll need to prepare are the following: a single teaspoon each of dried rosemary, crushed dried fennel leaves, dried wormwood or Artemisia and dried rue.

Next is that you'll have to follow this step-by-step procedure to come up with the most effective flea powder: 1.

Crush the dried herbs and mix.

2.

Pour the mixture into a moderately small shaker 3.

Take a small amount of the powder in between your thumb and forefingers and sprinkle and comb it through your pet's fur. Never comb too hard or you'll accidentally remove all the powder, which defeats the purpose of flea powder.

Try to use specific herbs that have never been sprayed with harmful chemicals.

Consider growing rue and fennel with pennyroyal around the pet's resting place or sleeping area. If your pet has its own bedroom, complete with bed sheets and pillows, keep in mind to wash the beddings in a special mixture like rosemary and wormwood immersed and rinsed in water; lastly, dry the bed sheet underneath the sun to double check the existence of fleas. You can also use tansy leaves as

something to rub on the animal's fur to put off fleas from living in your pet's beautiful fur. All you have to do is crush the tansy leaves using the mortar and pestle; next is you'll have to comb it through your pet's hair using a similar kind of salt shaker or sprinkler.

53. How to Start a Pet Sitting & Dog Walking Business For people who are business-minded and love pets at the same time, a pet sitting and walking business is very appropriate. There are so many people who have pets and who will patronize pet shops. There maybe pet shops, but there are only few that offer sitting and walking businesses for pets.

One good thing about this is that the market is growing tremendously that even the American Pet Product Manufacturers’ Association said that in 2007, Americans shelled out about $40.8 billion for the business.

Firstly there is a need to come up with a business name and that it is very important for the owner to make the name very easy to remember and very catchy. One has to be conscious enough to come up with a name that will not only be easy to remember but will tickle the imagination of the customer. In a business, product branding is very important.

With the name at hand, the owner then decides to register it. He or she must remember that operating it in an illegal way will not only take a toll on the business but might even result in distorting his personality. The owner must not also be discouraged by the processes, because the government, in implementing policies, sees to it that everything puts in place.

It is also necessary for the owner to insure the business because this will ensure that it is safe. Insurance is important because this is very necessary especially if it is new.

Also, the owner must see to it that he or she has studied the business, particularly its intricacies. This will allow the owner to plan ahead and prepare for eventualities beyond his or her control.

Lastly, the owner should prepare to promote the business in any way, including advertisements and other promotional ideas that will lead to its recognition. It always pays to advertise, especially when the business is new.

54. How to Safely Trim Your Pet's Nails

Pets, like children, are not careful especially when they use their nails. In some cases, nails grow and eventually results in pets getting untidy. This makes it necessary to pet owners to regularly cut the nails, or claws of dogs and cats.

It is necessary for pet owners to prevent the nails of their pets not to touch the ground or this will result in dirt getting stuck in their claws. Pets sometimes get hurt when their nails get broken and sometimes the problem lead to infections which, at all times, must be prevented.

One good way is to cut the nails when these are soft. This takes place when the pet just has its bath because submerging the nails to water leads to its softness. The owner, however, should always be very careful in cutting the nails because clippers can even result in bruises.

Another way is to open Vitamin E capsule and rub its content on the nails to make them soft. Soft nails are very easy to cut and easy to manage.

After clipping the nails and filling them, the owner can use lotion in polishing the nails with a soft cloth. The nails will then look so wonderfully beautiful and the pets might even appreciate it that when it is time to clip their nails, they will voluntarily offer them.

While doing the clipping, the owner, however, must be careful enough in not hitting the nail. In case when the nail is accidentally hit, the owner should immediately apply something that will prevent the bleeding, among them styptic powder. It is painful, but necessary to at least shorten the suffering of the pet.

But owner should also remember that like children, their pets sometimes are very stubborn that they do not want their nails clipped and cut. They must have a way of luring their pets to let their nails cut. One way is to offer some incentives like food to allow their nails to be cut.

55. How to Put a Cat/Dog on a Diet

Like human beings, pets like dogs and cats need to be healthy and that sometimes, and like humans, too, they become obese as they bury themselves in great amount of food not only provided to them by heir owners but also those they see as they play on the ground and with their neighbors.

So how should pet owner go about this problem of the pet?

Initially, the first step is really to determine whether the pet is overweight because just looking at the bulges on the stomach or their behind cannot become a good basis for a conclusion.

So this should be left to the expert and veterinarians are the ones who know everything about pets. The veterinarian will then determine whether the pet is obese or not and if it is obese, how obese.

The veterinarian will also then determine who obese the pet is and the cause of the problem. The expert will also be able to determine how to solve the problem.

With the advise, the owner will have an initial idea on what to do. But he or she should not stop with this. The idea is for the owner to develop a diet mechanism with the advice of the expert.

The owner should also adhere to the prescription of the veterinarian on the number of calories that the cat needs and the kinds of food that should be fed the pet. But the owner must also be cautious enough on how to slowly prevent the pet from ravishing those leftovers.

A cautious effort on the part of the owner to reduce his or her pet’s weight must also include putting up weight reduction food on the diet. This will not only enhance the reduction in weight but this will also slowly prevent the pet from adding more weight.

Another essential step is for the owner to play with the pet because this will enhance the metabolism not only of the animal but also of the person.

Lastly, the owner should monitor the progress of the program by weighing the pet as frequent as possible.

56. How to Reduce Animal Dust and Dander in Your Home Everyone in the home wants it fee of dust and every dirt, especially on every furniture and fixture piece. It is disheartening to note that the house is full of dust, the chairs are dirty because the paws of the pets are full of mud.

And the problem is always very much evident in rugs and other fabrics including the curtains, chair and sofa covers. Considering its danger to members of household, especially those with allergies caused by dust, something must be done.

To reduce dust and dander, the people in the house must use dust and oil soap in removing dust in furniture and this should be done everyday. Even the smallest toddler at home can give a hand in doing this chore, but it would help if everyone in the family, including the grannies do this together as a form of activity.

Because pets cause much dust, owners must look into how they can control their pets in bringing dust to the house. One is bathing these pets using dust removers such us pet shampoos and soaps But pet owners must do the grooming outside the house in order not to scatter the dust inside the house.

Another best thing to do Is to buy a system that filters the air especially for houses with ventilation outlets and furnaces. But even when the system is installed, the owner must be conscious enough in cleaning the system.

To get rid of bad and irritating odors, the owner must use air fresheners regularly.

The human nose is among the most sensitive senses that one has.

It must also be remembered that fabrics like sofa covers trap dust, so these must be cleaned as frequently as possible to prevent them from accumulating the dirt. Nooks must also be included in the cleaning up activities because when the amount of dust grows under the chairs, they eventually become a big, big problem.

But one best way to really get rid of dust from pets is to not bringing them inside the house and keeping them in their respective houses, or at least keeping them off the furniture.

Lastly, house owners must also spend something to rid their homes of dust from animals, particularly their pets. They can tap the services of those whose business is cleaning up the homes and making them look tidy as always as possible.

57. How to Remove Skunk Smell from Animals It is irritating to come home tired and smell skunk everywhere because the pets, particularly the dog, acquire it from outside of the house. Some people even lose the

appetite because of the problem.

Sometimes the skunk odor even gets into the consciousness that it is hard to take it out. So instead of finding ways to just remove it, might as well prevent it getting into the house.

Skunk is a problem that dogs get and taking it out of the pet is very hard. Because of this, the pet spreads the skunk into the corners of the house making the problem even bigger. But when the pets start spreading skunk, house owners should immediately.

One most effective way to eliminating skunk is to use hydrogen peroxide, baking soda and soap. To do this, mix everything and the apply it on the affected areas of the dog, particularly on its fur. Let it stay there for five minutes before rinsing it off thoroughly.

Another effective product in removing skunk are those mouthwash products and they can be used by applying the mouthwash in areas where the odor is present and rinsing it off also after five minutes.

Another effective way, however, is using paper towels in wiping off the pets, particular dogs, to remove the fluids from their bodies. Paper towels are available in stores and among the most effective tools in removing the skunk odor because this helps dries up the pet.

There are also products in the market that can remove skunk odor. But before applying these products on the pets, they should be dried up first. But the pet owner must also prevent the products from getting into the eyes of the pets. In case the products get into the eye, There are special shampoos that can be applied on the dogs to control the pungent odor and rinsing the products only after minutes of letting them stay on the pets.

The best way to do these activities is outside the house to prevent the odor from entering the house again.

58. How to Take apart an iPhone iPhone have parts that can be potentially replaced, like the battery, camera, back casing etc. Some techies can try to take apart and iphone and replace the parts themselves.

Here are the tools that you will need 1

iPod Opening Tools

2

Metal Spudger

3

Paper Clip

4

Heavy-duty Spudger

5

iPod Opening Tools

6

Metal Spudger

7

Paper Clip

8

Phillips #0 Screwdriver

Step 1 Insert a paper clip into the hole that is near the headphone jack. Press down the paper clip until the SIM card tray comes out.

Step 2 Slide the SIM card tray out of the iPhone.

Step 3 For the antenna cover, there are two tabs and two catches that is located underside the antenna cover. You can push the two tabs towards the black cover to release it.

Step 4 Slide the metal spudger between the dock connector and the antenna cover and insert it into the slot between the two. Gently open the two tabs to create a small gap between the antenna cover and the silver front bezel.

Step 5 Insert an iPod opening tool in the gap between the antenna cover and the front bezel. Slide the tool around the corner until you reach the metal backing. Repeat it on the same side.

Step 6 Grasp the antenna cover on either side and slide it up and away from the iPhone with some force.

Step 7 Remove the three Phillips #00 screws securing the rear panel to the iPhone.

Step 8 Begin the process of removing the rear panel on the side without buttons. Insert the pointed end of the heavy-duty spudger between the gray metal bar and the rear panel. Open the panel enough until you can get the tip of the iPod opening tool into the seam between the front bezel and rear panel.

Step 9 Slide the iPod opening tool along the edge of the case, releasing the four tabs. Be

sure not to accidentally snap the case back together once you've freed the side of the case.

Step 10 Repeat the same procedure on the other side of the iPhone to insert the iPod opening tool into the case.

Step 11 Slide the iPod opening tool along the edge of the case, releasing the three tabs. Don’t entirely remove the rear panel from the iPhone because it is still attached to the iPhone headphone jack cable.

It is really a challenging achievement taking apart an iPhone. So don’t get discourage right away if it seems to be hard at first. Just take a deep breath and make sure you have plenty of time to get the job done. But if you are not a techie person then might as well get the services of professional iPhone technician to avoid destroying your precious gadget.

59. How to Turn a flatbed scanner into a camera If you are already bored of your old flatbed scanner and decide to put it in the junk yard, you can turn it into a camera. You can take pictures from your scanner that doesn't need you to take apart the scanner or changing it permanently. There are no special operating system needed to take pictures all you need is a flatbed scanner, a computer and subjects for the photography.

The first step in taking pictures using your flatbed scanner is finding a subject. It should be a suitable object that can fit on the glass plate of the scanner. For beginners, you can start with seashells for example, or flowers, leaves etc. And as you progress you can use small things like watches.

You can arrange your favorite objects on the plate that you like. Just be careful not to scratch the glass if you are working on a sharp subject.

You don’t have to worry if you can’t close your scanner. Just leave the cover open or put a piece of cloth over your subject. The cloth will then become part of your masterpiece. For a safe background you can use a black cloth.

After selecting a subject and background you may now run the scanner and edit the finish product in your photo editing software. You can adjust a little bit on the brightness and contrast to make it look good. You can also crop it to get a well defined picture that is best on a printing paper.

If you don’t like the image of your first scan you can just easily lift the cloth and rearrange your objects or try something new. You can keep doing this until you get a good result.

If you are good in advanced editing software you can make marvelous compositions by overlaying several scans and then combining chosen parts from different images.

The quality of the illumination from the flatbed scanner is quite special since the object is illuminated by a long strip of light traveling across the glass plate. It is then

bathed in a soft diffused light which can’t be reproduced by other methods. And if you really want you can play with adding extra light sources that shine on your objects from the side.

You can experiment more on the subjects and basics of photography. Just have fun and your technique in flatbed scanner photography will just evolve. Hopefully this will boost your creativity and tickle your mind.

60. How to custom paint your laptop or PC If you are already bored with your laptop or PC with a one-color design and if you're handy with a spray paint then you can transform your laptop or PC from its current dull appearance and change it into something that is noticeable. Painting you laptop or PC will require some skills a couple of bucks and of course course patient and some time.

Things that you will be needing to spray paint your laptop or PC: spray paint (preferably car spray paint) screwdriver masking tape thick paper alcohol-base solvent or soapy water Step 1 To get the best finish, you have to dismantle first you laptop or PC. You have to take the computer apart and spray it entirely to get good results especially the edges.

Don't spray through the fan vents and speaker grills through.

Step 2 So you have to get yourself busy using a screwdriver to open and remove the laptop or PC parts. Be careful in peeling off any rubber feet or screw covers. Stick them to a clean and surface so you can just replace them afterwards. Don't force to remove the parts from your laptop or PC or you will just break them. It's not easy to find replacements for the broken parts of the laptop.

Step 3 Use the masking tape and the thick paper to cover the areas that you don't want to paint. Clean the surface that need to be painter with an alcohol-based solvent or soapy water to smooth the surface before you start with the actual painting.

Step 4 Make sure that you are painting on a flat surface horizontally before you paint to avoid the paint to run. Apply the paint using both horizontal and vertical movements to achieve an even coverage. Make sure that you spray from at least around 30cm away from the laptop - any closer than that and you'll have an orange peel effect. Be careful not to use too much paint for each coat too, as this can cause the paint to run.

Step 5 After a day or so, the paint should be hard enough to apply any graphics you want, or to mask off areas to which you want to apply a second color. In order to provide a glossy finish, you can then apply several coats of clear lacquer. This will protect the layer and prevent the color getting chipped. Leave the parts in a warm place for a

few days to harden before putting back the parts of your laptop or PC.