Section 9 components

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:45 Page 1

CABINET COMPONENTS, FITTINGS AND FINISHING TOUCHES

x173821_PWS_9_Cabinet_Components_p12_lh.qxp_x173821_PMS_9_Cabinet_Components_p11_lh 13/04/2017 14:22 Page 2

CABINET COMPONENTS, FITTINGS AND FINISHING TOUCHES CABINET COMPONENTS AND FITTINGS Adjustable legs and sockets Plinth clips Decorative legs Base cabinet hanger Internal cabinet hangers Wall cabinet hangers Wall fixings Furniture levellers Plinth edging strip Carcase connections Carcase connector brackets Screws Adhesives Worktop accessories Gas lifting systems Top flap stays & lifters Miscellaneous hinges Sliding folding door system Door buffers Shelf supports In-frame fittings & adhesive pads 1909 In-frame fitting Bedroom & miscellaneous fittings Cooker hood ducting

02 06 07 08 09 09 13 14 14 15 17 19 21 21 22 23 24 25 27 28 30 31 32 33

FINISHING TOUCHES Table & Worktop Support Legs Pan stand, towel rail & splashbacks Glass shelf & supports

36 37 39

IMPORTANT INFORMATION Loading capacities

42

9

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:31 Page 1

CABINET COMPONENTS

x173821_PWS_9_Cabinet_Components_p18_lh.qxp_x173821_PMS_9_Cabinet_Components_p12_lh 19/04/2017 16:36 Page 2

ADJUSTABLE LEGS & SOCKETS ONE-PIECE OR TWO-PIECE LEGS

WHICH HEIGHT?

• One-piece legs offer the most economical system.

However, using a separate fixing socket gives considerable handling advantages.

• 150mm for kitchens, 100mm for bedrooms.

140mm are available for special circumstances (e.g. uneven flooring)

WHICH FIXING SYSTEM?

END PANEL SUPPORT

• Bolt fix or screw fix for low/medium level production

• All the sockets & leg fixings are designed to overlap the base/end panel joint, reducing joint loading

• Dowel fix for large scale production PLASTIC, STEEL OR DECORATIVE LEGS? • Plastic legs are economical and strong • Steel legs are more suitable for heavy duty applications - use with steel fixing sockets • Decorative legs are used where no plinth is used see page 06

SERIES 350

SERIES 418

Steel - tube only

Plastic

FOOT Ø: 48MM

Leg tube: Adjustment range:

TUBE HEIGHT: 140MM

SOCKET COMPATIBILITY STEEL

Adjustable, steel 5mm, +20mm

FOOT Ø: 48MM

Leg tube: Adjustment range:

TUBE HEIGHT: 100MM OR 160MM

SOCKET COMPATIBILITY PLASTIC ONLY

Adjustable, plastic -5mm, +60mm

Order code

Description

Order code

Description

350 14 Z1 0X 02

140mm high tube

418 10 P2 0Z 02

100-160mm high

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.02

x173821_PWS_9_Cabinet_Components_p18_lh.qxp_x173821_PMS_9_Cabinet_Components_p12_lh 19/04/2017 16:36 Page 3

SERIES 415

SERIES 450

Plastic

Adjustable Leg Tube

TUBE HEIGHT: 100MM OR 150MM

FOOT Ø: 48MM

Leg tube: Adjustment range: •

•

SOCKET COMPATIBILITY PLASTIC ONLY

Adjustable, plastic -5mm, +20mm

4 pack available supplied with: 4x 415 15 P2 0Z 02 leg, 4x 840 00 P2 N9 00, 2x 226 30 24 VI T2 plinth clips Bulk packs available, legs only

FOOT Ø: 48MM

Leg tube: Adjustment range: •

TUBE HEIGHT: 100MM OR 150MM

SOCKET COMPATIBILITY PLASTIC ONLY

Adjustable, plastic -5mm, +20mm

Bulk packs of 2000 available

Order code

Description

Order code

Description

41510P20Z0232 41515P20Z02 41515P20Z0220 41515P2N9G244

100mm high 150mm high 150mm bulk packed tube only 4 pack set

450 10 P2 0X 02 450 15 P2 0X 02 450 15 B2 0X 02

100mm high tube 150mm high tube 150mm bulk packed tube only

Order code

Description

450 15 P2 S0 02

150mm one-piece leg

SERIES 450 Adjustable Leg Tube with Integrated Socket TUBE HEIGHT: 150MM

FOOT Ø: 48MM

Leg tube: Adjustment range: • • •

Adjustable, plastic -5mm, +20mm

Integral socket with 10mmØ bolt or 4x4mm chipboard screws (not supplied) End panel support: yes Designed to allow adjustment from inside the unit, as well as from the outside

9.03

Order Online www.pws.co.uk

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 4

FIXING SOCKETS SCREW FIX SOCKETS

DOWEL FIX SOCKET

Steel

Plastic

SOCKET COMPATIBILITY STEEL LEGS

• • • •

COMPATIBLE WITH 415 & 418 SERIES LEGS

Dimensions 60x60mm Fixing 4x4mm chipboard screws (not supplied) End panel support: optional Due to the position of the screw holes it may be necessary to use a 30mm offset plinth clip with this socket.

• • • •

Concealed dowel fixing using a 15mm diameter x 11mm depth blind hole Dimensions: diameter max 60mm Reduced flange, end panel support Dowel fixing allows for screw-free assembly if required

Order code

Description

Order code

Description

E1

Screw fix, 60x60mm, steel

840 00 P2 N9 00

Single dowel fix, 15mmø, black plastic

Order code

Description

840 00 P2 H5 15

Single dowel fix, 58x65mm, black plastic

SINGLE DOWEL FIX SOCKET Plastic COMPATIBLE WITH 415 & 418 SERIES LEGS

• • • •

Concealed dowel fixing using a 15mm diameter x 11mm depth blind hole Dimensions: 58x65mm Reduced flange, end panel support Dowel fixing allows for screw-free assembly if required

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.04

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 5

SINGLE DOWEL FIX SOCKET

BOLT/SCREW FIX SOCKET

Plastic

Plastic

Installation side view

Installation front view

COMPATIBLE WITH STEEL OR PLASTIC LEGS

• • • • • •

COMPATIBLE WITH STEEL OR PLASTIC LEGS

Dowel hole dimensions 15mmØ x 12mm deep

Concealed fixing via an expandable dowel, using a 15mmØ x 11mm blind hole in the underside of the base panel Dowel fixing allows screw free assembly if required Dimensions 60x60mm End panel support required Reduced flange allows plinth to butt up at front Supplied singularly or bulk packed

• •

Fix using 10mmØ, bolt or 4x4mm chipboard screws (not supplied) Bolt fixing allows adjustment from inside or outside of the base unit Dimensions 60x60mm End panel support

• •

Order code

Description

Order code

Description

N7 BN7

Single dowel fix socket Bulk packed dowel fix socket

N0

Single bolt/screw fix socket

SCREW FIX SOCKET

BOLT/SCREW FIX SOCKET

Plastic

Plastic

COMPATIBLE WITH 415 & 418 SERIES LEGS

• • •

COMPATIBLE WITH 415 & 418 SERIES LEGS

Fix using 7x4mm chipboard screw (not supplied) Dimensions: 85x85mm End panel support

• • •

Fix using 4x3.5mm chipboard screw (not supplied) Dimensions: 58x65mm, reduced flange End panel support

Order code

Description

Order code

Description

840 22 P2 T0 00

Screw fix, 85x85mm, black plastic

840 00 P2 H5 00

Bolt or screw fix, 58x65mm, black plastic

9.05

Order Online www.pws.co.uk

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 6

PLINTH CLIPS PLINTH CLIPS • 24mm offset should be used when the leg is required to give end panel support. The plinth should be rebated to avoid a gap between the gable panel and plinth • To fit the leg in this way the centre leg should be positioned 24mm from the edge of the base panel (assuming the plinth and the gable panel are the same thickness and the plinth rests flush with the gable). If the leg is to support the base panel only, the centre of the leg should be at least 30mm from the base end panel edge

ADJUSTMENT • Hollow bolt fixing allows leg adjustment from the inside of the carcase, making carcase levelling easy • Screw or dowel fixing also allows internal adjustment by drilling a 10mm hole centrally over the leg and plug with a 10mm plug cap HIDDEN MOUNTING • Cover caps are visible from the inside of the carcase, however screw or dowel fixing methods are unseen when installed with no internal adjustment

• A 30mm offset plinth clip can be used to bring the plinth flush with the gable panel (no rebate required) or a 24mm offset clip with the plinth by 6mm

SERIES 202 Steel and plastic

LEG/TUBE COMPATIBILITY ALL SERIES

• • •

ADJUSTABLE PLINTH CLIP

Height: 50mm Offset: 24mm Fixing: screw fix, 4mm chipboard screws (not supplied)

Order code

Description

202 50 24 VI T2

Adjustable plinth clip, steel and plastic

SERIES 226

SERIES 228

Plastic

Steel and plastic

LEG/TUBE COMPATIBILITY ALL SERIES

• • •

LEG/TUBE COMPATIBILITY 350, 418, 415 AND 450 SERIES

ADJUSTABLE PLINTH CLIP

Height: 30mm Offset: see below Fixing: screw fix, 3mm x 4mm chipboard screws (not supplied)

• • •

ADJUSTABLE PLINTH CLIP

Height: 30mm Offset: 24mm Fixing: screw fix, 3mm x 4mm chipboard screws (not supplied)

Order code

Offset

Description

Order code

Description

226 30 24 VI T2 226 30 30 VI T2 226 30 B4 VI T2

24mm 30mm 30mm

Adjustable plinth clip Adjustable plinth clip Bulk packed plinth clips

228 30 24 VI T2

Adjustable plinth clip

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.06

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 7

DECORATIVE LEGS SQUARE LEG

CYLINDRICAL LEG

STAINLESS STEEL FINISH

STAINLESS STEEL FINISH

• • • •

Height: 145mm - minimum installation height 155mm Height adjustment: +15mm Leg: 50 x 50mm Top plate = 90mmØ

• • • •

Height: 145mm Height adjustment: +15mm Leg: 42mmØ Top plate = 90mmØ

Order code

Description

Order code

Description

SDL145SS

Decorative square leg (set of 4)

DL145SS

Decorative cylindrical leg (set of 4)

ALUMINIUM LEGS ALUMINIUM FINISH

• • • • •

Square and cylindrical options Height: 150mm +5mm height adjustment 3mm thick 80x80mm square steel fixing plate with 4 counter sunk Screw holes for fixing to the underside of the carcase Supplied with fixing screws

9.07

Order Online www.pws.co.uk

FSSL150AL

FSCL150AL

Order code

Description

FSSL150AL FSCL150AL

Decorative square leg with fixing plate Decorative cylindrical leg with fixing plate

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 8

807 SERIES BASE CABINET HANGER

FEATURING

Lock 3DSafety

807 SERIES BASE CABINET HANGER Fixes base units to the wall creating a floating cupboard d •

Minimum cupboard height of 350mm

Order code

Colour

Fixing details

807 02 Z1 IN SX* 807 02 Z1 IN DX* 897 AS Z1 60 70 807 00 01 00 SX 807 00 01 00 DX

Metal Metal Steel White White

Dowel fix, left hand Dowel fix, right hand Anti drop base cabinet hanging plate for use with 807 cabinet hangers, 60mm long Cover cap for 807 base cabinet hanger, left hand, plastic Cover cap for 807 base cabinet hanger, right hand, plastic

NO OTHER SUPPORT REQUIRED

EASY MOUNTING

*FOR LOADING CABINET CONSTRUCTION & WALL FIXINGS - SEE PAGE 9.43

FURTHER INFORMATION:

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.08

x173821_PWS_9_Cabinet_Components_p11_lh.qxp_x173821_PMS_9_Cabinet_Components_p11_lh 12/04/2017 07:05 Page 9

701 SERIES INTERNAL CABINET HANGER NEW

701 SERIES INTERNAL CABINET HANGER • • • • • • •

Easy mounting All metal mechanism Slide on, slide off cover All screw heads completely sealed 22mm height adjustment, 19mm depth adjustment High loading capacity - Anti-drop Reduced bracket thickness - only 11mm including the cover cap

Order code

Colour

Fixing details

701 15 ZV VI SX 701 15 ZV VI DX 875 AS Z1 00 47 801 00 75 00 SX 801 00 75 00 DX 801 00 01 00 SX 801 00 01 00 DX 801 00 63 00 SX 801 00 63 00 DX

Metal Metal Metal Light grey Light grey White White Dark Grey Dark Grey

Wall cabinet hanger with anti-drop, screw fix, left hand Wall cabinet hanger with anti-drop screw fix, right hand Wall hanging bracket with anti drop Cover cap for 701 wall cabinet hanger, left hand Cover cap for 701 wall cabinet hanger, right hand Cover cap for 701 wall cabinet hanger, left hand Cover cap for 701 wall cabinet hanger, right hand Cover cap for 701 wall cabinet hanger, left hand Cover cap for 701 wall cabinet hanger, right hand

*FOR LOADING CABINET CONSTRUCTION & WALL FIXINGS – SEE PAGE 9.42

9.09

Order Online www.pws.co.uk

ANTI DROP

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 10

WALL CABINET HANGERS 800 SERIES INTERNAL CABINET HANGER • • • • •

Accurate levelling of units, easy mounting 25mm vertical and depth adjustment Unlimited horizontal adjustment when used with hanging rail Plastic case with metal mechanism Adjustment screws face the outside of the carcase for accessibility, allowing easy adjustment even when the cabinet is loaded

Order code

Colour

Fixing details

800 14 01 VI SX 800 14 01 VI DX 800 14 55 VI SX 800 14 55 VI DX 800 14 04 VI SX 800 14 04 VI DX

White White Beige Beige Brown Brown

Screw Screw Screw Screw Screw Screw

fix, fix, fix, fix, fix, fix,

4mmØ 4mmØ 4mmØ 4mmØ 4mmØ 4mmØ

screws, screws, screws, screws, screws, screws,

left hand right hand left hand right hand left hand right hand

FURTHER INFORMATION:

*FOR LOADING CABINET CONSTRUCTION & WALL FIXINGS - SEE PAGE 9.44

THE TOP SCREW IN FRONT OF THE HANGER ADJUSTS THE VERTICAL MOVEMENT, WHILE THE BOTTOM SCREW ADJUSTS THE DEPTH MOVEMENT.

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.10

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 11

806 SERIES INTERNAL CABINET HANGER • • • • •

28mm vertical adjustment and 25mm depth adjustment Unlimited horizontal adjustment when used with hanging rail All screw heads completely concealed Slide on, slide off cover Adjustment screws face the outside of the carcase for accessibility, allowing easy adjustment even when the cabinet is loaded

Order code

Colour

Fixing details

806 14 P2 VI SX

Cream

Screw fix 4mmØ, left hand

806 806 806 806 806

Cream Cream Cream Nickel Nickel

Screw fix 4mmØ, right hand Dowel fix, 2x10mm, left hand Dowel fix, 2x10mm, right hand Cover cap, left hand Cover cap, right hand

14 P2 VI DX 22 P2 IN SX 22 P2 IN DX 00 NS 00 SX 00 NS 00 DX

FURTHER INFORMATION:

*FOR LOADING CABINET CONSTRUCTION & WALL FIXINGS - SEE PAGE 9.45

806 14 series

806 22 series

815 SERIES SCREW FIX CONCEALED CABINET HANGER • • • •

All metal mechanism which fits behind the wall unit back panel fixed by 3.5mmØ screws Adjustment access from inside the wall unit through 10mmØ holes 16mm vertical adjustment, 13mm depth adjustment Unlimited horizontal adjustment when used with hanging rail

Order code

Colour

815 32 Z1 VI 00

Concealed

Fixing details cabinet hanger

*FOR LOADING CABINET CONSTRUCTION & WALL FIXINGS - SEE PAGE 9.46

9.11

Order Online www.pws.co.uk

FURTHER INFORMATION:

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 12

816 SERIES SCREW FIX/DOWEL CONCEALED CABINET HANGER • • • • • •

All metal mechanism which fits behind the wall unit back panel Adjustment access from inside the wall unit through 35mmØ holes Reversible design of this cabinet hanger allows it to be fixed by screws only or by means of 3 integral dowels 12mm vertical adjustment, 10mm depth adjustment Unlimited horizontal adjustment when used with hanging rail 35mm cover cap

Order code

Description

816 32 Z1 DU SX 816 32 Z1 DU DX CC35NI

Concealed cabinet hanger, left hand Concealed cabinet hanger, right hand Cover cap, nickel finish

FURTHER INFORMATION:

*FOR LOADING CABINET CONSTRUCTION & WALL FIXINGS - SEE PAGE 9.47

820 SERIES DOWEL CONCEALED CABINET HANGER • • • • •

All metal mechanism which fits behind the wall unit back panel Smaller than standard cabinet hangers; 84mm length Adjustment access is through a 35mmØ hole 12mm vertical adjustment, 10mm depth adjustment Unlimited horizontal adjustment when used with hanging rail, 35mm cover cap

Order code

Description

820 32 Z1 DU SX 820 32 Z1 DU DX CC35NI

Concealed cabinet hanger, left hand Concealed cabinet hanger, right hand Cover cap, nickel finish

*FOR LOADING CABINET CONSTRUCTION & WALL FIXINGS - SEE PAGE 9.48

FURTHER INFORMATION:

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.12

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 13

WALL FIXINGS STEEL HANGING RAIL • • •

50mm steel rail which supports the wall unit cabinet hangers at any point along its length Especially suitable for hollow plasterboard walls Rail thickness 1.4mm

Order code

Description

870 AC Z1 80 LS

2032(L) x 50(H) x 6.4(D)mm

SLIMLINE STEEL HANGING RAIL • • •

26mm steel rail which supports the wall unit cabinet hangers at any point along its length Especially suitable for hollow plasterboard walls Rail thickness 1.8mm

Order code

Description

875 AC Z1 20 32

2032(L) x 26(H) x 6(D)mm

SLIMLINE STEEL HANGING PLATE • • •

27mm steel plate Economical method of mounting cabinet hangers Plate thickness is 1.8mm

Order code

Description

875 AC Z1 00 60

60(L) x 27(H) x 6(D)mm

STEEL HANGING PLATE 63

• • •

Steel plate, bright zinc plated with three slotted holes Economical method for mounting cabinets Plate thickness is 1.6mm

Order code

Description

W250

63(L) x 39(H) x 6.6(D)mm

*FOR ALL LOADING CABINET CONSTRUCTION & WALL FIXINGS ABOVE - SEE PAGE 9.49

9.13

Order Online www.pws.co.uk

39 6.6

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 14

FURNITURE LEVELLER SERIES 300 FURNITURE LEVELLER • •

• • •

Steel bodied leveller, adjustment up to +20mm Fastens to the bottom edge of the carcase with two integral knock-in spikes and is secured with two 3.5mm chipboard screws (not included) Can be adjusted internally by drilling a hole in the bottom of the base panel Plastic foot to be adjusted by a slotted screwdriver Die-cast version for heavy duty use adjusted by a 6mm allen key

Order code

Description

Loading capacity

300 00 Z2 00 A2 300 00 Z2 00 Z2

Plastic foot Die-cast foot

100kg 150kg

PLINTH EDGING STRIP • • • • •

Transparent plastic U channel Clips into the bottom edge of the plinth The flexible lip seals the gap between the floor and the plinth Supplied in 2500mm lengths Available to suit either 15/16mm or 18/19mm plinth thickness

Order code

Description

HP25/15TR HP25/18TR

Edging strip for 15/16mm thick plinth Edging strip for 18/19mm thick plinth

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.14

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:32 Page 15

CARCASE CONNECTIONS CONNECTING FITTING

EURO THREAD DOWEL

W = 24mm or 34m depending on dowel

BRIGHT ZINC PLATED FINISH

RAW ZAMAK FINISH

• • •

Die-cast cam fitting 15mm diameter hole required Choice of compatible dowel types Suitable for 15mm or 18mm thick carcase material

Order code

Carcase thickness

C15/15ZA C15/18ZA

15mm, X = 7.5, Y = 12 18mm, X = 9, Y = 14

• • • •

Screw-in steel dowel Direct fastening thread into a 5mm diameter hole Thread length 11mm, dowel length 24 or 34mm Recessed drive

Order code

Dowel length

D24/E5ZP D34/E5ZP

24mm 34mm

Order code

Carcase thickness

CF3/10WH

15/18mm

Order code

Description

KD1AL

Plastic connector block

CONNECTING FITTING WHITE PLASTIC FINISH

• • •

Pressure fix block with 11mm diameter dowel Suitable as a worktop fixing bracket when used at the top of the carcase Use with 5mm diameter screws (not provided)

CONNECTOR BLOCK FINISH ALMOND (RAL9001)

•

Plastic KD block

9.15

Order Online www.pws.co.uk

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 16

BEECH DOWELS MULTIGROOVED DOWELS

Order code

Description

DW4 DW5

8 x 30mm 8 x 35mm

Order code

Dimensions

LAM20

56 x 23 x 4mm

Order code

Description

VSH15/19

36mm

Order code

Description

JP13AL JP18AL

135mm x 19mm x 3.5mm 190mm x 19mm x 3mm

BISCUIT JOINTS ELLIPTICAL WOODEN PLATES

• •

Suitable for joints in particle board, chipboard, plywood and solid wood 100mm diameter x 4mm wide cutter

CARCASE CONNECTOR SCREW NICKEL PLATED FINISH

• • •

Connect two carcases together Requires a 5mm diameter hole 100mm diameter x 4mm wide cutter Only suitable for 18mm carcases

DOOR JOINTING PLATE ALMOND (RAL9001) FINISH

• • •

Steel plate Connect two doors or a door and a drawer front Uses No.6 woodscrews (not supplied)

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.16

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 17

DOOR JOINTING PLATE CHROME FINISH

• • •

Steel plate Connects two doors or a door and a drawer front Can be used across the top stile of a door

Order code

Description

JP10CH

98mm x 36mm x 2mm

Order code

Description

VB15

Steel door connector

DOOR CONNECTOR BRIGHT ZINC PLATED FINISH

• • •

Steel pin to connect two doors or a door and drawer front, form a hidden joint Use 4mm diameter hole Supplied with a translucent plastic spacer

CARCASE CONNECTOR BRACKETS CORNER BRACKET BRIGHT ZINC PLATED FINISH

• • •

90° corner plate 1.2mm thick 9.5mm x 5mm slots for adjustment

9.17

Order Online www.pws.co.uk

Order code

size

A162B

A=19mm, B=19mm, C=10mm

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 18

CORNER BRACKET BRIGHT ZINC PLATED FINISH

• • •

90° corner plate 1.2mm thick Holes are 5mm diameter

Order code

Size

A150

A=25mm, B=10mm, C=32mm, D=32mm

Order code

Size

SP156

A=25mm, B=28.5mm, C=38mm, D=16mm, E=14mm, F=17.7mm, G=19mm

Order code

Size

SP161

A=25mm, B=25mm, C=12.5mm, D=11mm, E=8mm

CORNER BRACKET BRIGHT ZINC PLATED FINISH

• • • •

90° corner plate 1.5mm thick Two 16mm x 5.5mm slots for horizontal and vertical adjustment Holes are 5.5mm diameter

CORNER BRACKET BRIGHT ZINC PLATED FINISH

• • • •

90° corner plate 1.2mm thick 12.5mm x 5mm slot for adjustment Holes 5mm countersunk

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.18

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 19

SCREWS MACHINE SCREWS BRIGHT ZINC PLATED FINISH

• • •

M4 thread steel Suitable for wooden or metal handles or knobs Washer head - combi drive

Order code

Description

Order code

Description

M4X20 M4X25 M4X30 M4X35

4 x 20mm 4 x 25mm 4 x 30mm 4 x 35mm

M4X40 M4X46.5 M4X50

4 x 40mm 4 x 46.5mm 4 x 50mm

EUROSCREWS NICKEL PLATED FINISH

• •

Self tapping thread into 5mm pilot hole Available countersunk or pan head

Order code

Description

ESC5X11 ESC5X13 ESP5X11 ESP5X13

5 x 11mm countersunk head 5 x 13mm countersunk head 5 x 11mm pan head 5 x 13mm pan head

Order code

Description

F4X33 F4X45 F4X55

4 x 33mm 4 x 45mm 4 x 55mm

CARCASE CONSTRUCTION SCREWS BLACK FINISH

• • •

High quality hardened steel screws No pilot hole required Funnel head, recessed drive

9.19

Order Online www.pws.co.uk

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 20

CHIPBOARD SCREWS BRIGHT ZINC PLATED FINISH

NICKEL PLATED FINISH

(WHERE APPLICABLE)

(WHERE APPLICABLE)

• •

Hardened steel screws Recessed drive

Order code

Thread x length

Order code

Thread x length

C3.5X12 C3.5X16 C3.5X20 C3.5X25 C3.5X30 C3.5X40 C4X12

Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk

C4X16 C4X20 C4X25 C4X30 C4X40 NC3.5X16 NC4X16 C5X50 C3.5X10NP

Countersunk BZP 4 x 16mm Countersunk BZP 4 x 20mm Countersunk BZP 4 x 25mm Countersunk BZP 4 x 30mm Countersunk BZP 4 x 40mm Countersunk nickel plated 3.5 x 16mm Countersunk nickel plated 4 x 16mm Countersunk BZP 5 X 50mm Countersunk, nickel plated 3.5 x 10mm

Order code

Thread x length

C8X1 C8X11/4 C8X11/2 C8X13/4 C8X2 C8X21/2 C8X3 C10X2 C10X21/4 C10X3

Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk

BZP BZP BZP BZP BZP BZP BZP

3.5 x 12mm 3.5 x 16mm 3.5 x 20mm 3.5 x 25mm 3.5 x 30mm 3.5 x 40mm 4 x 12mm

WOODSCREWS BRIGHT ZINC PLATED FINISH

NICKEL PLATED FINISH

(WHERE APPLICABLE)

(WHERE APPLICABLE)

• • •

Hardened steel screws Suitable for chipboard, softwood and hardwood Available in countersunk or roundhead with recessed drive

Order code

Thread x length

C4X5/8 C6X1/2 C6X5/8 C6X3/4 C6X1 C6X11/4 C6X11/2 C6X2 C8X5/8 C8X3/4

Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk Countersunk

BZP BZP BZP BZP BZP BZP BZP BZP BZP BZP

No. No. No. No. No. No. No. No. No. No.

4 x 5/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 1/2 6x2 8 x 5/8 8 x 3/4

BZP BZP BZP BZP BZP BZP BZP BZP BZP BZP

No. No. No. No. No. No. No. No. No. No.

8x1 8 x 1 1/4 8 x 1 1/2 8 x 1 3/4 8x2 8 x 2 1/2 8x3 10 x 2 10 x 2 1/4 10 x 3

WALL PLUGS • • • •

Plastic expansion plugs Suitable for our range of woodscrews PL1 is red and requires a 5.5/6mmØ hole PL2 is brown and requires a 7/8mmØ hole

Order code

x

y

Screw size

PL1 PL2

5mm 7mm

34mm 40mm

No. 4/6/8 No. 10

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.20

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 21

ADHESIVES POWERSTICK 2 PACK ADHESIVE • • •

Bonds in seconds. This quick tool-free system is suitable for jointing a wide variety of timber, plastic and metal products Aerosol CFC free POWER1 - 12 month shelf life

Order code

Description

POWER1

Pack of 50g adhesive/200ml activator

BPOWER1

Box of 12 powerstick, shrink wrapped pack of 200ml activator and 50g adhesive

TABLELINE GLASS ADHESIVE • • •

High viscosity adhesive formulated for bonding glass to metal 50g bottle, cures rapidly Gives a clear bond when exposed to UV-light Especially suitable for bonding tableline bar supports to glass shelves

Order code

Description

TLGLUE50

Adhesive for tableline bar supports, 50g

WORKTOP ACCESSORIES WORKTOP CONNECTOR BOLT ZINC PLATED FINISH

• • •

Steel clamp for joining two lengths of worktop together Two 35mm diameter holes must be drilled at each worktop edge and a slot cut between the two holes The nut is then tightened to draw the two worktops together

9.21

Order Online www.pws.co.uk

Order code

Description

VB5/150

150mm length connector bolt

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 22

GAS LIFTING SYSTEMS PEGASO An opening system for 600mm wide larder doors Mechanism • • •

The mechanism comes in packs of two, one for the top of the cabinet and one for the bottom The stabilisation bar is sold separately in lengths of 2.5m, which can be cut down to suit When used in double door opening situations this is also suitable for 1000 & 1200mm openings

Stabilisation bar (PEGBAR2500)

Mid fixing for Pegaso To be used in conjunction with the stabilisation bar on doors with height over 1210mm to prevent the door from bowing and door flex.

Order code

Description

PEGASO600 PEGBAR2500 PEGMIDFIX

Pegaso, swing opening mechanism for use with larder Pegaso stabilisation bar 2.5cm, cut to length Pegaso mid fixing

FURTHER INFORMATION: Please allow 65mm from front edge of shelf, this is to ensure there is enough space for mechanism and stabilisation bar to sit fully in the cabinet.

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.22

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 23

TOP FLAP STAYS & LIFTERS TOP FLAP HINGE STEEL, NICKEL PLATED FINISH

• • •

Available with one side sprung and one unsprung or with two springs Springs have adjustable tension Supplied in pairs

Order code

Spring mechanism

KFH2NP KFH4NP

One adjustable spring/one without spring Two adjustable springs

MICROWAVE DOOR HINGE KIT • •

Opens upwards to provide optimum access to items in the cupboard 2 gas operated springs to lift the door upwards Maximum door weight 4kg

Order code

Spring mechanism

KMHS KMHPISTON

Microwave door hinge, 2 gas springs, 450-600mm units Replacement piston for Microwave hinge

IMPORTANT NOTES When applying the hinge to a wall cabinet, note that the internal depth required is 220mm minimum. Standard cabinet hanging brackets may be unsuitable. When the door is opened the finishing height is 370mm above its original position.

KMHS

FURTHER INFORMATION: Useable cabinet width = Internal width – 2x fitting width (BW) Useable cabinet height = Internal height – fitting height (BH)

Dimensions for installation, inside the cabinet Width Min depth Min height

Space requirement for the fitting Width (BW) Height (BH)

411-570mm

35mm

220mm

320mm

40mm

SELF CLOSURE TOP FLAP STAY Adjustable gas filled self-closure mechanism NICKEL PLATED FINISH

Order code

Description

NSD-35L NSD-35R

Top box stay, left hand Top box stay, right hand

Bracket included • • • •

Can be used singularly or in pairs Stay bracket included for use with aluminium framed glazed doors, the AF models featured in section 1 Use 1 stay where 1/2 door height (cm) x door weight (kg) is between 20 - 70 Use 2 stays where 1/2 door height (cm) x door weight (kg) is between 40 - 140

9.23

Order Online www.pws.co.uk

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 24

MISCELLANEOUS HINGES EASY-FIT HINGE • •

To fit a standard kitchen fascia over a free standing appliance Complete with bracket, hinges, door stop and all the required fixings Suitable for all doors up to 22mm thick

•

Order code

Description

EF1

Easy-fit hinge system

FURTHER INFORMATION: The depth of the appliance should be checked to determine worktop depth, 650mm worktops are recommended. Soap dispenser drawers may catch the cabinet fascia if it is within 25mm from the edge of the appliance

CAN BE FITTED LEFT OR RIGHT HAND OF 600MM CARCASE

PIANO HINGE NICKEL PLATED FINISH

• • •

Steel piano hinge, 1830x32x0.7mm Hole centres 60mm Screw fixing with No4 woodscrews

Order code

Description

000 074

Piano hinge

FACE FRAME CONCEALED HINGE For the application where the edge of the door lays over the frame or adjacent panel • • • •

Screw fixing 110° opening angle, self-closing action Lateral and height adjustment available Minimum door overlay 34mm

order code description

ET2045

Face frame hinge

FINISH All metal, nickel plated construction

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.24

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:33 Page 25

SLIDING FOLDING DOOR SYSTEM SLIDING-FOLDING DOOR SYSTEM A versatile, simple-to-fit sliding door system allowing pairs of doors to fold and slide left or right, with a maximum of 4 doors (2 pairs) per cabinet. The top profile, supplied in 1180mm lengths, should be cut to size and screwed in place. The two doors are joined with offset flap hinges, the top guide roller fitted and the doors hung left or right with 3 or 4 110° or 120° concealed cabinet hinges.

REQUIREMENTS FOR A PAIR OF DOORS:•

1 sliding door hinge

•

1 sliding door mechanism

•

1 plastic track

•

3-4 steel flap hinges for standard doors or 4-5 for tall doors

•

110º/120º concealed hinges & base plates

ADJUSTMENTS CALIBRATED HEIGHT ADJUSTMENT Height adjustment of hinges assembled with the sliding component is achieved through a cam.

Through this arrangement a parallel movement of the component in the track is achieved. The result is a smooth movement without any binding.

ASSEMBLY Pre-mount the sliding component on the hinge of the sliding door.

Insert the sliding component into the track and turn the lever either left or right (no tools necessary).

Assemble the hinges of the door, hinged to the cabinet, onto their mounting plates.

Note: The internal space taken up when a pair of doors are fully open is 80mm

DEPTH ADJUSTMENT Depth adjustment of the hinges mounted on the sliding component is achieved through the fixing screw of the same hinge. Depth adjustment should be made in conjunction with the hinges mounted on the opposite door. This adjustment is useful to keep the ‘L’ distance constant all along the front of the furniture.

9.25

Order Online www.pws.co.uk

HINGE AND TRACK INSTALLATION

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:34 Page 26

SLIDING DOOR HINGE NICKEL PLATED FINISH

• • •

Screw fix 35mm diameter hole on top corner of the secondary door 1 hinge per pair of doors

Order code

Description

C116199

Sliding door hinge, screw fix

Order code

Description

CPXEX99

Door connection flap hinge, screw fix

Order code

Description

DG3FA1180

Plastic track, screw fix, black

SLIDING DOOR MECHANISM • • •

Connects to the hinge and locks onto the track Plastic and metal construction with nylon rollers 1 mechanism per pair of doors

Order code

Description

D116APYPA

Sliding door tracking mechanism

STEEL FLAP HINGE NICKEL PLATED FINISH

• • •

Connects two folding doors together Can be fitted with euroscrews or wood screws 4 or 5 flap hinges are used on tall doors to line up with concealed hinges

PLASTIC TRACK BLACK PLASTIC FINISH

• • •

Black plastic track is fixed onto the carcase panel 1180mm long, black, can be cut to length 1 piece per pair of doors

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.26

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:34 Page 27

DOOR BUFFERS CHAMELEON DOOR BUFFER Standard

TRANSLUCENT FINISH

• • • • •

Self-adhesive clear plastic buffer Suits any carcase colour Absorbs the impact of doors when using self-closing hinges 10mm diameter x 3mm thick Supplied in sheets of 100 pieces

Order code 3203

CHAMELEON DOOR BUFFER Heavy duty

TRANSLUCENT FINISH

• • • • • •

Self-adhesive clear plastic buffer Suits any carcase colour Absorbs the impact of doors when using self-closing hinges 13mm diameter x 4mm thick The increased surface area ensures greater adhesion Supplied in sheets of 80 pieces

Order code 0038

DOOR BUFFER ALMOND (RAL9001) FINISH

• • •

Economy door buffer Designed to cover 5mm diameter hole Supplied with the damper pre-inserted

Order code TDB32AL

DOOR BUFFER TRANSLUCENT FINISH

• • •

Plastic door buffer Fits into a 5mm diameter hole Suits any carcase colour

9.27

Order Online www.pws.co.uk

Order code DB2TR

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:34 Page 28

SHELF SUPPORTS SAFETY SHELF SUPPORT • • •

Translucent plastic body with steel peg Suitable for conventional shelves Requires a 5mm diameter hole

Order code SAF1

METAL SHELF SUPPORT NICKEL PLATED FINISH

• •

Die-cast self-locking Requires a 5mm diameter hole

Order code SEK2

DOOR BUFFER NICKEL PLATED FINISH

• • •

Metal barrel type shelf studs with flange Can be used either way round Requires a 5mm hole

Order code 148/5NP

SHELF STUDS NICKEL PLATED FINISH

• •

Metal spade shape Requires a 5mm hole

Order code 146/5NP

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.28

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:34 Page 29

GLASS SHELF SUPPORT • • • •

Single piece die-cast component Requires a 5mm diameter hole Conforms to latest safety standards by securing the glass shelf in position Suitable for 4mm or 6mm glass, minimum installation width 3mm per side

Order code 561/5NP

FURTHER INFORMATION Suitable for 400mm, 500mm, 600mm and 800mm glass shelves where a centre post is not used

For glass shelves see page 9.39 - 9.40

GLASS SHELF SUPPORT • • • • •

Adjustable two piece support Mounted with No 6 x 5/8 screw (not supplied) Conforms to latest safety standards by securing the shelf in position.

Designed for wide units with restricted frontal access where the shelf is mounted behind a centre post Suitable for 4mm or 6mm glass, minimum installation width 1mm per side

Order code 450/5NP

FURTHER INFORMATION Suitable for 800mm & 1000mm glass shelves where a centre post is used

ALFA GLASS SHELF SUPPORT • • • • •

Premium, adjustable 2 piece support Half turn eccentric cam fixing for damage free fixing and positioning Conforms to latest safety standards by securing the shelf in position ‘X’ suitable for 6, 8 & 10mm thick glass Width of shelf must be 6/7mm less than inner cabinet width

Order code

Description

ALGSS

Alfa glass shelf support

9.29

Order Online www.pws.co.uk

NOTE - Refer to page 9.39 - 9.41 for a range of decorative and concealed shelving systems.

13 10 o5

19

o5

9 13

x 9

22

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:34 Page 30

IN-FRAME FITTINGS & ADHESIVE PADS IN-FRAME DOOR STOP NICKEL PLATED FINISH

• • • •

Designed to work with 36mm in-frame door system and 3203 door buffers Prevents ‘swing-through’ Two recommended per frame Fitted using two 6x12 roundhead screws (not supplied)

Order code IFDS1

IN-FRAME PRESSED STEEL BRACKET • • • •

Pressed steel bracket Designed for use with pre-drilled fixed frame system Use euroscrew (ESP5X11, not supplied) & 6x12 roundhead screw (not supplied) Dimension: 17mm x 17mm

Order code IFDFB1

SELF-ADHESIVE PADS • • • • •

300 white polyethylene foam pads Adhesive on both faces Supplied in a dispenser box Suitable for positioning items prior to screw fixing Dimensions: 25mmx12mmx2mm

Order code DSP300

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.30

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:34 Page 31

IN-FRAME FITTING BRASS BUTT HINGES • • •

Solid brass butt hinges for 1909 notched doors and frame Supplied in pairs, complete with screws When using butt hinges we would recommend the use of a magnet closer (MAGNET/DC)

Order code

Finish

BHCH BHBN BHPE

Chrome plated Bright nickel plated Pewter finish

FURTHER INFORMATION Dimensions - 75x42x2mm Recess required 80x20x2.15mm

IN-FRAME FITTINGS PACKS Pre-bagged packs containing the commonly used components required for fitting 1909 in-frame doors Order code

Application

Contents

INFP1909D INFP1909FO INFP1909CD

Door sets Frame only Curved doors

5 x frame brackets, 10 x roundhead screws, 5 x euro screws, 2 x door stop, 1 x magnet, 2 x felt door buffer 5 x frame brackets, 5 x euro screws, 5 x roundhead screws 5 x frame brackets, 10 x roundhead screws, 5 x euro screws, 2 x door stop, 1 x magnet, 2 x felt door buffer

DOORSTOP NICKEL PLATED FINISH

• • • •

For inframe doors Two required per door Dimensions suit magnetic catch and cover Fit using 2 x 6x12 roundhead screws per bracket (not supplied)

MAGNETIC CATCH AND COVER • •

Recommended for use with butt hinges 1909 doors ordered with notching will be pre-drilled for the magnet

Order code

Description

MAGNET/DC

Magnetic catch, 15mm diameter

MAGNET/COVER

Felt magnet cover, 17mm diameter, 3mm thick, charcoal

Order code

Application

IFDOORSTOP IFDOORSTOP/C

For standard in-frame doors For curved in-frame doors

Door Buffer Bracket (IFDOORSTOP) (IFDOORSTOP/C) Magnet (MAGNET/DC)

Felt Buffer (MAGNET/COVER)

Door

Felt Buffer

DIMENSIONS FOR MAGNET DRILLING 14x8mm deep hole, 4.5mm in from the edge of the door, positioned opposite the door stop.

The felt buffer should be positioned between the doorstop and magnet

9.31

Order Online www.pws.co.uk

Door Buffer Bracket (IFDOORSTOP) (IFDOORSTOP/C)

(MAGNET/COVER)

Magnet (MAGNET/DC)

x173821_PWS_9_Cabinet_Components_p12_lh.qxp_x173821_PMS_9_Cabinet_Components_p12_lh 13/04/2017 19:26 Page 32

BEDROOM & MISCELLANEOUS FITTINGS WARDROBE TUBE • • • •

Steel oval section tube, 0.7mm thick steel Suitable for use with SL322D, SL10 & SL20 tube supports Standard length 2500mm with a welded joint Can be supplied cut to length, subject to minimum order quantities

Order code

Size

T1130NP

Steel tube 30 x 15mm, nickel plated

TUBE SUPPORT NICKEL PLATED FINISH

• •

Die-cast support for oval wardrobe tubes Screw-fixing with x3 No. 6 wood screws (not supplied)

CENTRE & END TUBE SUPPORT

Order code SL322DNP

Centre tube support

CHROME FINISH

• • • •

Die-cast support, easy installation For use where an 800mm+ span is encountered Screw fixing with No6 wood screws Blanked end which can be used as a matching end support

Order code

Description

SL10NP SL20NP

Tube bearing centre support Tube bearing end support

FOOT TACK • • •

Steel tack with a nylon head Can be used as a furniture glide to protect the furniture during manufacture and transport Can also be used to prevent moisture absorbing into end panels

Order code 10560

DRAWER FRONT ADJUSTER • • • •

Plastic case and metal insert Pressure-fix Fit into the drawer front then use M4 screw (supplied) to clamp the wooden drawer to the drawer front The fitting allows 3mm adjustment in any direction

Order code DA6310

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.32

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:35 Page 33

COOKER HOOD DUCTING Suitable for use in kitchen or bathroom interiors. Components push-fit together for a quick, airtight connection.

The tubes are manufactured from upvc for durability and have self extinguishing properties. 100mm ducting will pass approximately 300 cubic metres per hour of free air and 125mm ducting will pass approximately 650 cubic metres per hour of free air.

KIT A - 100MM SYSTEM (100MMX3M) System 100 ducting kit consisting of: 2x cowled wall outlets (1x brown and 1x white), 2x threaded hose connectors 1x 1 metre hose, 1x rectangular wall plate, 2x 1 metre flat channel, 1x flat channel connector, 1x 90º elbow bend (round to flat), 1x fixing kit (8 screws and plugs), 1x instructions leaflet

Order code

Description

DUC100A

Ducting kit A, 100mm x 3m

KIT B - 100MM SYSTEM (100MMX1M) System 100 ducting kit consisting of: 2x cowled wall outlets (1x brown and 1x white), 2x threaded hose connectors, 1x 1 metre hose, 1x round wall plate, 1x fixing kit (8 screws and plugs), 1x instructions leaflet

Order code

Description

DUC100B

Ducting kit B, 100mm x 1m

KIT A - 125MM SYSTEM (125MMX3M) System 125 ducting kit consisting of: 2x wall outlets (1x brown and 1x white), 2x threaded hose connectors, 2x 1 metre flat channel, 1x 400mm flat channel, 1x rectangular wall plate, 1x 1 metre hose, 1x offset reducer 125mm/100mm, 1x 90º horizontal bend, 1x flat channel connector, 1x foam strip, 1x fixing kit (4 screws & plugs), 1x instructions leaflet

Order code

Description

DUC125A

Ducting kit A, 125mm x 3m

KIT B - 125MM SYSTEM (125MMX1M) System 125 ducting kit consisting of: 2x cowled wall outlets (1x brown and 1x white), 2x threaded hose connectors, 1x round wall plate, 1x 1 metre hose, 1x fixing kit (8 screws & plugs), 1x instructions leaflet

Order code

Description

DUC125B

Ducting kit B, 125mm x 1m

VENTILATION GRILLE SATIN ALUMINIUM FINISH

• •

Recess mounted aluminium ventilation grille Cut-out size - 450mm x 70mm

9.33

Order Online www.pws.co.uk

Order code

Description

148AL

480mm x 80mm

x173821_PWS_9_Cabinet_Components_p12_lh.qxp_x173821_PMS_9_Cabinet_Components_p12_lh 13/04/2017 17:39 Page 34

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:35 Page 35

FINISHING FIN NISHING TOUCHES TOUCHES

FINISHING TOUCHES

9.35 9 .35

Order O rder O Online nline www.pws.co.uk www.pws.co.uk

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:35 Page 36

TABLE & WORKTOP SUPPORT LEGS SERIES 615 & SERIES 620

SERIES 680

570KG LOAD CAPACITY

• • •

Both series 615 and 620 feature an adjustable foot Leg fixes to the underside of the worksurface using a screw-fix patented die-cast socket on both series 60mm and 80mm diameter options

• • •

These legs have four veneered MDF sleeves which slide over an aluminium tube, interlocking securely in place Sanded oak finish, fitted with an adjustable foot 80mm diameter

Order code

Finish

Dia

Height

Adj

Packing

Order code

615 70 C1 04 RN 620 70 C1 01 RN 620 70 IX 01 RN 615 87 C1 01 RN 620 87 C1 01 RN 620 87 IX 01 RN

Chrome Chrome Stainless steel Chrome Chrome Stainless Steel

60mm 80mm 80mm 60mm 80mm 80mm

710mm 710mm 710mm 870mm 870mm 870mm

+30mm +30mm +30mm +30mm +30mm +30mm

set 4 single single single single single

680 71 30 01 RN Sanded oak 680 87 30 01 RM Sanded oak

SERIES 606

Finish

Dia

Height

Adj

Packing

80mm 80mm

710mm 870mm

+30mm +30mm

set 4 single

ADJUSTABLE SQUARE LEG Height adjustment: Range of +10mm/-10mm Leg dimension: 60mm x60mm Load capacity: 470kg per leg

Can be cut down (remove the plastic foot first)

* LOAD CAPACITY PER LEG

470KG* LOAD CAPACITY

570KG LOAD CAPACITY

• • •

Features an adjustable foot Leg fixes to the underside of the worksurface using a welded steel plate 60mm diameter

Order code

Finish

606 87 C1 01 RN

Chrome plated 60mm

Dia

• • •

A stainless steel worksurface support leg in a contemporary square design Supplied with all necessary fixings Available in two height options: 710mm and 870mm

Height

Adj

Packing

Order code

Finish

Dia

Height

Packing

870mm

+30mm

single

646 70 IX 04 RN 646 70 IX 04 RN

Stainless Steel Stainless Steel

80mm 80mm

710mm 870mm

set 4 singles

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.36

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:35 Page 37

MISCELLANEOUS ACCESSORIES PAN STAND • •

Made from heavy gauge wire Chrome plated

Order code

Finish

Width

Depth

KPSC

Chrome

520mm

265mm

SERIES 641 150KG* LOAD CAPACITY * LOAD CAPACITY PER LEG

• •

100mm square worktop support leg Features adjustable foot - adjustment +10mm

Leg fixes to the underside of the worksurface using integral die-cast socket. The socket is completely concealed by the 100mm square leg.

Order code

Finish

Height

Packing

641 87 AL C1 RN

Matt anodized aluminium

870mm

singles

AUTOMATIC POP-UP IRONING BOARD • • • • •

Rises automatically when pulled out from behind a 140mm high drawer front. Fold the top flat and the board is ready to use Manufactured from epoxy coated steel When in use the worksurface is exceptionally stable The surface has a replaceable heat reflective cover Approximate working area of 940x320mm

Order code

Description

Finish

PI6OAL PIC

Ironing Board Spare Cover

Almond (Ral9001) Silver

Fits into a 400, 450 or 500mm carcase. Requires a minimum 100mm high carcase and 505mm deep aperture. Worktop overhang must be: 25-40mm.

9.37

Order Online www.pws.co.uk

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:35 Page 38

TOWEL RAIL FLEXIBLE DESIGN

•

A high quality two or three arm aluminium towel rail with roller glide action Flexible design to enable vertical or horizontal mounting

•

Order code Description

Finish

RTR2CH RTR2SI

chrome effect 95mm Silver 94mm

Two arm Two arm

Width Height Depth 27mm 38mm

440mm 439mm

GLASS SPLASHBACK • • •

6mm thick toughened glass offering a strong and durable surface Easy wipe clean Back of glass painted in black

Order code

Finish

Width

Height

Depth

SBG600BK

glass, black

600mm

750mm

6mm

STAINLESS STEEL SPLASHBACK • •

Durable, waterproof and easy to clean, the ideal material for a splashback Made from 18/10 stainless steel and bonded to a moisture resistant mdf core

Order code

Finish

SSSB600

stainless steel 600mm

Width

Height

Depth

750mm

8mm

Can be installed with an adhesive but consideration must be given to the environment/weight and type of adhesive used.

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.38

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:35 Page 39

GLASS SHELF & SUPPORTS ADJUSTABLE SHELF SUPPORTS KITCHEN OR BATHROOM

• • • •

Stylish shelf supports in matt nickel or chrome finishes Suitable for use with either timber or glass shelves Can be used in kitchens or bathrooms Packed in singles

NOTE: Plastic area is clear not black as shown CGSSSAC CGSSLAC CGSSXLAC CGSSXLANI

4mm 4mm 4mm 4mm

20kg 30kg 40kg 40kg

Chrome Chrome Chrome Matt Nickel effect

24mm 26mm 24mm 40mm

100 R R=shelf thickness.

See notes below for details.

39

38 42

40

R=shelf thickness.

See notes below for details.

70

M-6

M-5 25

max load

R R=shelf thickness.

See notes below for details.

40

max max thickness dimensions

38

35

R

Order code Description

M-6 105

43

CGSSSAC

CGSSLAC

CGSSXLAC/CGSSXLANI

Supplied complete with screw and assembling dowels. Maximum shelf weight 20kg. Maximum shelf thickness 24mm - minimum shelf thickness 4mm.

Supplied complete with screw and assembling dowels. Maximum shelf weight 30kg. Maximum shelf thickness 26mm - minimum shelf thickness 4mm.

Supplied complete with screw and assembling dowels. Maximum shelf weight 40kg. Maximum shelf thickness 40mm - minimum shelf thickness 4mm.

INTERIOR GLASS SHELVES 10MM TOUGHENED GLASS

• •

Made from 10mm toughened clear glass All edges are ground & polished with bevel detail

The use of glass safety shelf supports is recommended to prevent the shelf falling out when moved or tipped. Refer to section pg 9.30-31.

9.39

Order Online www.pws.co.uk

Order code

Wall carcase width

Shelf width

shelf depth

shelf thickness

GS10/400 GS10/500

400mm 500mm

354mm 454mm

250mm 250mm

10mm 10mm

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 40

GLASS SHELVES 8MM TOUGHENED GLASS

• •

Made from 8mm toughened clear glass Polished on all edges and feature a 1x1mm bevel on the top edge of all sides

Order code Description

Width

Depth

Thickness

CG200x480 CG200x580 CG200x780 CG200x880

480mm 580mm 780mm 880mm

200mm 200mm 200mm 200mm

8mm 8mm 8mm 8mm

toughened clear glass toughened clear glass toughened clear glass toughened clear glass

GLASS SHELVES 6MM TOUGHENED GLASS

•

Made from 6mm toughened glass with all edges ground and polished

The use of glass safety shelf supports is recommended to prevent the shelf falling out when moved or tipped, refer to section pg 9.30-31.

Order code Carcase width

Shelf width

Shelf depth

Shelf thickness

GS400/18 GS500/15 GS500/18 GS600/18 GS800/18 GS900/18 GS1000/18

354mm 460mm 454mm 554mm 754mm 858mm 958mm

250mm 250mm 250mm 250mm 230mm 230mm 230mm

18mm 15mm 18mm 18mm 18mm 18mm 18mm

400mm 500mm 600mm 700mm 800mm 900mm 1000mm

GLASS SHELF SUPPORT Ø22

• •

Ø12

Stylish shelf support suitable for use with glass shelves above Easily mounted onto either the wall or a panel

16-20mm

Wall attachment Possibility of a belated height adjustment of 6mm

Order code

Description

GSWFSS GSPFSS

Shelf support, wall fixing, pair, stainless steel Shelf support, panel fixing, pair, stainless steel Ø22

Ø12

Maximum distance between shelf supports is 700mm with a load bearing capacity up to 85kg per m2.

Panel attachment Suitable for panels of 16mm to 20mm thickness

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.40

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 41

TIMBER & GLASS SHELF SUPPORTS • • •

Stylish shelf support available in chrome or nickel Suitable for use in kitchens or bathrooms Suitable for use with a shelf with a minimum thickness of 3mm and maximum shelf thickness of 30mm

Order code

Description

max shelf max shelf max load thickness dimensions capacity

CGSSLC CGSSLN

chrome nickel

30mm 30mm

800x210mm 800x210mm

18kg 18kg

ADDITIONAL INFORMATION: Brackets have a 4mm tolerance horizontally, 8mm vertically.

Shelf support consists of 2 parts; a top and bottom, which are attached to a backplate; pre-drilled into an 8mm hole.

CONCEALED SHELF SUPPORTS HEAVY DUTY CONCEALED WALL SHELF SUPPORT

CSSPF120 (heavy duty) • • • • • •

One piece design, suitable for shelf panels 22mm thick onwards Fixes into the face of the panel and through to the wall for additional support with 5mmøx50mm screws Suitable for shelf panels from 22mm thick (heavy duty only) Load bearing capacity up to 85kg per m2 equally distributed The support is height and tilt adjustable Finish: bright zinc plated

Order code Description CSSWF120 CSSWF160 CSSPF120

9.41

Dia

wall fixing, concealed 12mmØ wall fixing, concealed 12mmØ Heavy duty, face panel fixing 12mmØ

Length

Panel thickness

120mm 120mm 120mm

22mm 22mm 28mm

Order Online www.pws.co.uk

BRIGHT ZINC FINISH

CSSWF120/160

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 42

IMPORTANT INFORMATION

1

2

NOMINAL Kg LOADING CAPACITY 300mm

600mm

1000mm

STEEL FRAME A

IMPORTANT

Any loading capacity quoted here is the result of tests which have been carried out with tooling in compliance with EN 15939 06/2014 (steel frame A) norm and refers to the relevant item, correctly positioned and assembled, disregarding any construction variables of the finished cabinet, and disregarding the way it is fastened to the wall. We recommend that all dimensions which have been quoted in our technical drawings are complied with and recommend testing a complete cabinet at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

Fe

The values quoted hereunder refer solely to the specific cabinet as per the above drawing order code 701 15 ZV VI SX 701 15 ZV VI DX

3

Nominal loading capacity per piece 40 KG

Relevant testing laboratory CAMAR

Screws used for the test 2 x ø4x16 mm

ATTENTION: THE LOADING CAPACITY IS DETERMINED

BY THE FOLLOWING FACTORS

1

Dimensions and material of the cabinet.

2

Positioning of the bracket against top (A) and back panels (B).

3

Rigidity of the top panel

Presence, position and quantity of dowels, connection fittings and glue.

4

Presence and thickness of the back panel (A), depth of the milling (B) and dimensions of the hole in the back panel (C, D)

5

Type, diameter and length of the screws used

6

If the bracket is only partially hooked onto the wall plate

7

Dynamic stress

Bracket completely hooked onto the wall plate T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.42

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 43

1

2

NOMINAL Kg LOADING CAPACITY

IMPORTANT

Any advised maximum loading capacity, as quoted here, is the result of tests which have been carried out on the specific base cabinets shown here, according to 14749, EN 14688 and ISO 7170 norms and refers to the relevant item, correctly positioned and assembled, disregarding any construction variables of the finished cabinet, and disregarding the way it is fastened to the wall. We recommend that all dimensions which have been quoted in our technical drawings are complied with and recommend testing a complete cabinet at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

Chipboard

The values quoted hereunder refer solely to the specific cabinet as per the above drawing Tested loading capacity

order code

P1 P2 P3

Relevant testing laboratory

36 Kg + 108 Kg + 166 Kg +

Maximum loading capacity per piece advised by CAMAR

LGA

120 Kg

LGA

120 Kg

LGA

120 Kg

LGA

120 Kg

310 Kg P1 P2 P3

807 02 Z1 IN SX 807 02 Z1 IN DX

178 Kg + 50 Kg + 50 Kg + 278 Kg

P1 P2 P3

897 AS Z1 60 70

36 Kg + 108 Kg + 180 Kg + 324 Kg

P1 P2 P3

200 Kg + 50 Kg + 50 Kg + 300 Kg

3 1

ATTENTION: THE LOADING CAPACITY IS DETERMINED

BY THE FOLLOWING FACTORS

Dimensions and material of the cabinet.

9.43

2

Position in relation to the top panel (A)

Order Online www.pws.co.uk

3

Position (A) and thickness of the back panel (B), depth of the milling (C)

4

Dynamic stress

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 44

1

2

NOMINAL Kg LOADING CAPACITY

FE

IMPORTANT

Any loading capacity quoted here is the result of tests which have been carried out with tooling in compliance with DIN 68840 norm and refers to the relevant item, correctly positioned and assembled, disregarding any construction variables of the finished cabinet, and disregarding the way it is fastened to the wall. We recommend that all dimensions which have been quoted in our technical drawings are complied with and recommend testing a complete cabinet at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

The values quoted hereunder refer solely to the specific cabinet as per the above drawing order code 800 14 01 VI SX

Nominal loading capacity per piece 70 Kg

Relevant testing laboratory LGA

Screws used for the test 2x ø3,5x35mm

800 14 01 VI DX

70 Kg

LGA

2x ø3,5x35mm

800 14 55 VI SX

70 Kg

LGA

2x ø3,5x35mm

800 14 55 VI DX

70 Kg

LGA

2x ø3,5x35mm

800 14 04 VI SX

70 Kg

LGA

2x ø3,5x35mm

800 14 04 VI DX

70 Kg

LGA

2x ø3,5x35mm

3

ATTENTION: THE LOADING CAPACITY IS DETERMINED

BY THE FOLLOWING FACTORS

1

Dimensions and material of the cabinet.

2

Positioning of the bracket against top (A) and back panels (B).

3

Rigidity of the top panel

Presence, position and quantity of dowels, connection fittings and glue.

4

Presence and thickness of the back panel (A), depth of the milling (B) and dimensions of the hole in the back panel (C, D)

5

Type, diameter and length of the screws used

6

If the bracket is only partially hooked onto the wall plate

7 Dynamic stress

Bracket completely hooked onto the wall plate

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.44

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 45

1

2

NOMINAL Kg LOADING CAPACITY

FE

IMPORTANT

Any loading capacity quoted here is the result of tests which have been carried out with tooling in compliance with DIN 68840 norm and refers to the relevant item, correctly positioned and assembled, disregarding any construction variables of the finished cabinet, and disregarding the way it is fastened to the wall.

We recommend that all dimensions which have been quoted in our technical drawings are complied with and recommend testing a complete cabinet at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

The values quoted hereunder refer solely to the specific cabinet as per the above drawing order code

Nominal loading capacity per piece 50 Kg

Relevant testing laboratory LGA

Screws used for the test 2x ø3,5x30mm

806 14 P2 VI DX

50 Kg

LGA

2x ø3,5x30mm

806 22 P2 IN SX

65 Kg

LGA

-

806 22 P2 IN DX

65 Kg

LGA

-

806 14 P2 VI SX

3

ATTENTION: THE LOADING CAPACITY IS DETERMINED

BY THE FOLLOWING FACTORS

1

Dimensions and material of the cabinet

2

Positioning of the bracket against top (A) and back panels (B).

3

Rigidity of the top panel

4

Presence and thickness of the back panel (A), depth of the milling (B) and dimensions of the hole in the back panel (C, D)

5

Type, diameter and length of the screws used

6

If the bracket is only partially hooked onto the wall plate

Bracket completely hooked onto the wall plate

9.45

Order Online www.pws.co.uk

Presence, position and quantity of dowels, connection fittings and glue.

7 Dynamic stress

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 46

1

2

NOMINAL Kg LOADING CAPACITY

FE

IMPORTANT

Any loading capacity quoted here is the result of tests which have been carried out with tooling in compliance with DIN 68840 norm and refers to the relevant item, correctly positioned and assembled, disregarding any construction variables of the finished cabinet, and disregarding the way it is fastened to the wall. We recommend that all dimensions which have been quoted in our technical drawings are complied with and recommend testing a complete cabinet at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

The values quoted hereunder refer solely to the specific cabinet as per the above drawing order code 815 32 Z1 VI 00

3

Nominal loading capacity per piece 40 Kg

Relevant testing laboratory CAMAR

Screws used for the test 5 x ø3,5x40mm

ATTENTION: THE LOADING CAPACITY IS DETERMINED

BY THE FOLLOWING FACTORS

1

Dimensions and material of the cabinet

4

Presence and thickness of the back panel (A), depth of the milling (B)

2

5

Position in relation to the top panel (A)

Type, diameter and length of the screws used

3

Strength of the side panel

Presence, position and quantity of dowels, connection fittings and glue.

6

If the bracket is only partially hooked onto the wall plate

7

Dynamic stress

Bracket completely hooked onto the wall plate

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.46

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 47

1

2

NOMINAL Kg LOADING CAPACITY

IMPORTANT

Any loading capacity quoted here is the result of tests which have been carried out with tooling in compliance with DIN 68840 norm and refers to the relevant item, correctly positioned and assembled, disregarding any construction variables of the finished cabinet, and disregarding the way it is fastened to the wall. We recommend that all dimensions which have been quoted in our technical drawings are complied with and recommend testing a complete cabinet at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

FE The values quoted hereunder refer solely to the specific cabinet as per the above drawing order code 816 32 Z1 DU SX

Nominal loading capacity per piece 65 Kg

Relevant testing laboratory LGA

Screws used for the test 3 x n/a 6x n/a

816 32 Z1 DU DX

65 Kg

LGA

3 x n/a 6x n/a

3

ATTENTION: THE LOADING CAPACITY IS DETERMINED

BY THE FOLLOWING FACTORS

1

Dimensions and material of the cabinet

4

Presence and thickness of the back panel (A), depth of the milling (B)

2

5

Position in relation to the top panel (A)

3

Strength of Presence, position and quantity of the side panel dowels, connection fittings and glue.

Type, diameter and length of the screws used

6

If the bracket is only partially hooked onto the wall plate

Bracket completely hooked onto the wall plate

9.47

Order Online www.pws.co.uk

7

Dynamic stress

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 48

1

2

NOMINAL Kg LOADING CAPACITY

IMPORTANT

Any loading capacity quoted here is the result of tests which have been carried out with tooling in compliance with DIN 68840 norm and refers to the relevant item, correctly positioned and assembled, disregarding any construction variables of the finished cabinet, and disregarding the way it is fastened to the wall. We recommend that all dimensions which have been quoted in our technical drawings are complied with and recommend testing a complete cabinet at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

FE The values quoted hereunder refer solely to the specific cabinet as per the above drawing order code 820 32 Z1 DU SX

Nominal loading capacity per piece 40 Kg

Relevant testing laboratory CAMAR

Screws used for the test 2 x ø3,5x30mm

820 32 Z1 DU DX

40 Kg

CAMAR

2 x ø3,5x30mm

3

ATTENTION: THE LOADING CAPACITY IS DETERMINED

BY THE FOLLOWING FACTORS

1

Dimensions and material of the cabinet

2

4

Presence and thickness of the back panel (A), depth of the milling (B)

5

Position in relation to the top panel (A)

Type, diameter and length of the screws used

3

Strength of the side panel

6

If the bracket is only partially hooked onto the wall plate

Presence, position and quantity of dowels, connection fittings and glue.

7 Dynamic stress

Bracket completely hooked onto the wall plate

T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)

9.48

x173821_PWS_9_Cabinet_Components_p10_lh.qxp_x173821_PMS_9_Cabinet_Components_p10_lh 06/04/2017 10:36 Page 49

1

NOMINAL Kg LOADING CAPACITY

2

IMPORTANT

Any advised maximum loading capacity, as quoted here, is the result of tests which have been carried out in compliance with the UNI 10768 norm and correspond to the maximum loading capacity admitted per hooking point, and refers solely to a cabinet with the same dimensions as indicated, and with the product correctly positioned and assembled, disregarding the way it is fastened to the wall. We recommend that all dimensions and compatibilities with hanging brackets as shown in our technical drawings are complied with and recommend testing a complete cabinet with the selected hanging brackets and plates/rails at an accredited testing institute, according to the norms which are in force in the countries where you intend to sell your products.

The loading capacity of the rail indicates the maximum loading capacity permitted per hooking point of a cabinet with these dimensions. order code 870 AC Z1 80 LS

Relevant testing laboratory CATAS

Nominal loading capacity 1365 N

875 AC Z1 20 32

CATAS

1975 N

875 AC Z1 00 60

CATAS

1975 N

3

ATTENTION: THE LOADING CAPACITY IS DETERMINED BY THE FOLLOWING FACTORS

N = Newtons

Bracket completely hooked onto the wall plate

9.49

Order Online www.pws.co.uk

1

Dimensions and material of the cabinet.

2

3

If the bracket is only partially hooked onto the wall plate

4

Warping due to excessive tightening of the horizontal adjustment

Dynamic stress

x173821_PWS_9_Cabinet_Components_p12_lh.qxp_x173821_PMS_9_Cabinet_Components_p12_lh 13/04/2017 17:40 Page 50

T:: 0 T 01325 1325 5 505599 05599 ((North) North) | 8 88 8 ((South) South) F: F: 01325 01325 5 505598 05598 ((North) North) | 8 89 9 ((South) South)

9.50 9 .50