STANHOPE BEDROOMS SIZE GUIDE
DOOR/DRAWER SIZE PARAMETERS FEATURE STORAGE DOORS
DRAWERS
WARDROBE DOORS
Height Min - 283mm Max -895mm
Height Min - 896mm Max - 2540mm
DOOR DRILLING SERVICE at the point of order or by indicating on the Stanhope order form. An additional 2 days leadtime applies to all orders that require drilling.
Height Min 60mm Max 282mm Width Min -100mm Max-1200mm
Width Min -100mm Max-1200mm
Size parameter exceptions: BOLAM: Minimum door width with internal Shaker design – 275mm ACOMB: Minimum drawer/door width – 240mm. and doors below 1699mm high have a 200mm long groove on the top. Doors above 1700mm high have a 900mm long groove on the left/right hand side.
Width Min -100mm Max - 896mm
ELSDON: Minimum drawer height with internal Shaker design - 160mm Min drawer width with internal design 230mm Min door width with internal design - 230mm Bedroom door 1495 high panels will be sized to match in line with 2155 door.
Grain Direction • Drawer fronts are supplied with horizontal grain as standard • Standard and Tall doors are supplied with Haze which is horizontal on all drawers/ doors. Doors for corner cabinets Doors can be supplied with either left or right side edge square. Available up to Max. 1699mm high.
1 Panel door/drawers below 649mm 2 Panel doors 650-1699mm 3 Panel doors 1495 only 4 Panel doors 1700+ over
Wardrobe doors Wardrobe door designs with two panels will be supplied with the mid rail at 655mm from the bottom edge to the centre of the mid rail as standard unless otherwise
3 panel doors are available for <1699mm. Please state at time of order. Please state at time of order If cross rails need to align across all bespoke sizes.
ANGLED DOOR OPTIONS Angled doors are available in a wide variety of angles and shapes as shown in left illustration and the PWS Stanhope order form.
•
Angled doors are available within the same door size parameters listed above (up to 2540x896mm)
• •
Angled doors are not available in gloss When ordering, please specify the type of angled door (A or B) and dimensions for Left Hand Height (LH), Right Hand Height (RH), Bottom Width (BW) and for stepped angled doors specify Top width (TW).
•
Additional 5 day lead time will apply to orders that include angled doors.
•
Door sizes above 1700mm high in Bolam, will be supplied with a mid-rail as standard. Mid-rail height is 6x5mm as standard unless otherwise
TW
LH
A
BW
RH LH
B
BW
TW
RH
LH
B
BW
RH
LH
A
BW
RH