Testing and sealing technology for piping construction by Heidi Büro für Werbung

Gas

Water

Product range Testing and sealing technology for piping construction

DVGW product

Sewage

Where Innovation meets experience. As a corporation with a long history in it's field, städtler + beck

As diverse as your requirements are, this städtler + beck website

provides you with a comprehensive and proven range of both

provides you with the complete spectrum of our products, applica-

standard products and specialized services for piping, testing and

tions and services.

sealing. We also offer all related maintenance and repair services and are continually developing new products and solutions.

For more than 30 years, städtler + beck has been known for its expertise in the testing and sealing technology. At our headquarters

The core competence of städtler + beck consists of individual

in Speyer, Germany, we construct, produce and distribute a wide variety

and highly flexible solutions based on proven technologies and field-

of solutions to meet all kinds of requirements and solve a wide range

tested applications. Many innovative developments by städtler +

of problems of our customers.

beck were developed in close cooperation with utility companies and users on site.

Speyer is part of a quickly developing region, located where the River Neckar meets the River Rhine. The picturesque city looks back on a

Finding solutions for special requirements are part of our everyday

long history and has developed into a thriving industrial centre, which

business. Feel free to contact us, whenever you are confronted

benefits from the regional economic development and the thriving

with a seemingly unsolvable problem. We are ready to serve you,

European market.

if you urgently need a special spare part, want to rent a special testing device, need practical assistance or are looking for a reliable partner to accompany a project right from the beginning. We consider your needs our personal business.

Proven know-how backed up by practical experience Fast, flexible and safe solutions! As partner in the field of sewage testing and sealing technology,

As a result, städtler + beck has developed into a highly valued

as well as pipe-drilling and stetting of stop-off bags, städtler +

brand all over Europe, whenever it comes to advanced DVGW cer-

beck takes up the challenge to continually develop new solutions

tified connection drilling, bag positioning and testing devices rated

and products in order to meet the increasing requirements of the

at the highest safety class, as well as complete testing sets, camera-

market.

supported stopper testing and high-pressure testing equipment.

A long history of innovation and continuous improvement of appli-

At the same time, städtler + beck cover the widest range of me-

cation technology and efficiency are characteristics of städtler +

chanical and pneumatic testing and sealing systems.

beck. They are backed by uncompromising quality and superior customer service.

Even in the field of sewage pipe renovations, städtler + beck offers competent consulting and a comprehensive line of packers for reno-

Our products and solutions are the result of practical experience de-

vation, inspection and building connection.

rived from close contact with the users on site. They are marked by a high level of user friendliness, efficiency and safety.

Quality made in Germany Patented solutions from städtler + beck Numerous patents demonstrate the position of städtler + beck as an innovative company. Our superior expertise is the result of highly skilled employees who are trained on a regular basis to secure the continuous high quality standard of all our products and services. For the development of its stopper-testing device KOMUP städtler + beck received the Innovation Award of the "Wirtschaftsförderung Rheinland-Pfalz" (promotion of the economy - Palatinate). We view this as a symbol of success and feel encouraged to continue our course of steady innovation and product development.

Safety you can rely on Our systems and devices conform to all safety standards and

As a member of all leading industry associations, such as DVGW,

regulations, in many cases even surpassing their requirements.

DWA, FIGAWA, VDRK and IKT, we maintain the highest level of safety and technology for your benefit.

More than ever before, städtler + beck emphasizes on guaranteeing and ensuring the best possible application of our products and

This means, you can always rely on technology, expertise, safety and

solutions on site.

service from städtler + beck.

Internal training programs as well as the presence at all relevant seminars and conferences are self-evident for all decision-making employees at städtler + beck.

DVGW Certification The DVGW Cert GmbH is the leading European certification agency

For customers and market partners, DVGW certification clearly

for companies in the gas and water industry and covers all certifi-

indicates that a product manufacturer, installation specialist, utility

cation processes relevant in this field. In close cooperation with test

company or other expert, works according to the very latest stan-

laboratories, all gas and water-related products as well as related

dards and employs state of the art technology.

manufacturing and service processes, quality management and environment protection systems are monitored according to DIN

As an example, all single bag positioning devices (optionally with

EN ISO 9000 and DIN EN ISO 14001. This guarantees both indus-

pre-pressure measurement) or double bag positioning devices from

try specific test and monitoring processes as well as tailor-made

st채dtler + beck carry the DVGW logo and reduce possibly dan-

procedures.

gerous situations during the work on gas carrying pipelines to a minimum.

Quality management for energy and water With all test procedures, safety, hygiene and environment protection are at the centre of our activities. We work in compliance with the DVGW regulations as well as all nationally and internationally

DVGW product

established standards and certification programmes.

With st채dtler + beck, consulting services are part of the core business! High requirements concerning the safety of products and pro-

supplier who takes over a vital part of the process within the frame-

cedures, as well as continuously changing regulations due to econo-

work of its' quality management.

mic globalisation and the ongoing harmonisation process of European legislation represents a tremendous challenge.

Our experts examine and check your gas and sewage bags and systems right on the building site.

For this reason, st채dtler + beck not only offers comprehensive on-site service and support, but presents itself as a responsible

You can always depend on us!

Product program | Testing and sealing technology for piping constructions

Guide to the städtler + beck product range Different to our price list, in this product range the products with various sizes / clamping ranges are not listed seperately in all sizes / clamping ranges. Only the smallest and the biggest version of the respective product is listed. You can find the complete available sizes / clamping ranges in our actual price list, that you can download at www.splusb.de.

Display of our product range:

for single bag positioning device without pressure measurement Type: 110

• MDA™ 1 bar, single bag; DN 50 - DN 315

for single bag positioning device with pressure measurement • MDA™ 1 bar, single bag, with pressure measurement; DN 50 - DN 315

Type: 110

Display of our price list:

MDA™ 1 bar - Multi dimensional Gas stop-off bag DVGW certificate DG-4520BRO183 - connection depending on bag positioning device, for example s+b, VEW double bag positioning device, etc. Bestell-Nr.

Unit

Price

for singe bag positioning device without pressure measurement 11011001

MDA™ 1 bar, bag positioning device; DN 50 - DN 80

piece

184,00

11011002

MDA™ 1 bar, bag positioning device; DN 80 - DN 130

piece

197,00

11011003

MDA™ 1 bar, bag positioning device; DN 100 - DN 160

piece

208,00

11011004

MDA™ 1 bar, bag positioning device; DN 150 - DN 210

piece

222,00

11011005

MDA™ 1 bar, bag positioning device; DN 200 - DN 315

piece

283,00

Important information about the product photos! The product photos used in our product range don't match the actual scope of delivery.

Table of contents Gas stop-off technology Pipe drilling and bag positioning devices

. . . . . . . . . . . . . . . . . . . . . . .

Pipe drilling units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 • Accessories for all tapping devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 • Drilling device for drilling gas and water pipes without loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Bag positioning devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 • Accessories for bag positioning devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 • Bag positioning devices for double stop-off bags with the funktion to release the tension between bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 • Bag positioning devices for stop-off bags with pressure release . . . . . . . . . . . . . . . . . . . . . . . . . 12 • HA “MINI” bag positioning device (house connection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 High pressure blocking technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 • HSG 300-4, hydraulic Plug setting system 4 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • pneumatic drive for drilling and tapping device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • hydraulic stopple operation and pressing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • t-piece with flange, two pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • End plug with inner square 32 mm and O-ring seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • Blind flange PN 16 with sealing, screws and nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • Combination gas lock between pipe drilling device and lock, flange on both sides . . . . . . . . . . . . . . . 13 • DN 200 / DN 350 PN 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • Adater between pipe drilling device and combination gas lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • Adapter between Stopple device and special gas lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • Cutting uptake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • HSS center drill with barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • Center drill shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • HSS Bimetallic circular cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • Special closing plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • Flange with gasket unit for magnet and plug positioning rod, PN 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • Magnet rod and plug positioning rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • Pipe drilling and HA stop-off device until 1 bar pipe pressure 1 to 2 ½" . . . . . . . . . . . . . . . .12

Testing and stop-off bags

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gas stop-off bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 • Accessiores for HA stop-off bags (house connection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • Testing head with pressure gauge – opening with bicycle- or car valve for filling the

stop-off bag, closing with air nipple valve type 20, connection to stop-off bag. . . . . . . . . . . . . . . . . . . 18 • Hand pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

• Double bag for Nitrogen-Hydrogen mixture-weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 • Gas double stop-off bag with extra strong special cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 • without pressure release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 • with pressure release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 • Gas double stop-off bag without pressure release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Gas stop-off bag with conical rubber plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • with probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • without probe, equipped with quick connection type 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Gas stop-off bags for bag positioning devices of all manufacturers . . . . . . . . . . . . . . . . . . . . . 16 • Single bag for s + b single bag positioning device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Single bag for double bag positioning device “VEW” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Single bag for single bag positioning device “H+B” size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Double bag for s+b positioning device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Double bag for positioning device “Manibs” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Gas stop-off bag with extra strong special cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 • Gas stop-off bag with pressure measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 • HA gas stop-off bag for house connections installed onto PA pipe . . . . . . . . . . . . . . . . . . . . . . 18 • Manual insertion gas stop-off bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 • with T-piece, ball valve/air connector type 26 and one pressure gauge with protective cap . . . . 17 • with quick connection coupling type 26, without pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 • with pressure gauge and Perbunan coated cover, equipped with T-piece, ball valve/

air connector type 26 as well as pressure gauge with protective cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

• Manual insertion testing bag/stop-off bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • MDA™ 1 bar – Multi-dimensional Gas stop-off bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 • for single bag positioning device without pressure measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 • for single bag positioning device with pressure measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 • for double bag positioning device with or without pressure release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • for manual positioning with T-piece, ball valves, manometer and conical rubber plug . . . . . . . . . . . 16 • Pipe termination stop-off bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 • Replacement covers for all s+b Gas stop-off bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 • Plastic covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • Special plastic covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • Special cover made of aluminum-coated glass fibre foil (welding sparks)

- suitably for all fabric bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • Replacement rubber bags for all stop-off bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • made of natural rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • made of chloroprene rubber, very well oil and chemical-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • Single bag for Nitrogen-Hydrogen mixture-weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 • Stop-off bag wtih long hose (approx. 600 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • without protective cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Insertion technology (HA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 • Adapter for all hoses for main gas connection with 2" external thread . . . . . . . . . . . . . . . . . 20 • Gas lock for gas-free insertion of a sliding TV camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 • HA Glove lock for house connections (Gas) to change the HAE (main blocking device) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 • Hose for main gas connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 • Universal hose adapter for s+b-HAT’s to the use of different gas hose systems . . . . . 20 Inspection technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • Coloured measuring fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 • Gas testing and leakage measuring device for leakage measurement accordingly DVGW-TRGI G 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • mechanical testing and leakage measuring device “System Kräwer” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • electronic testing and leakage measuring device type “s+b Quickmess” . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • House line gas pipe testing device, 1 bar/150 mbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 • ISOTEST 4S insulation test unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 • Precision pressure gauge for main check accordingly DVGW-TRGI G 600 . . . . . . . . . . . . . 20 • made of plexiglass with engraved mbar markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • made of plexiglass in u-shape, mounted on wooden board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Stop-off technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • Moment plug – Branch and pipe stopper, high quality configuration . . . . . . . . . . . . . . . . . . . . . 22 • Pipe end stoppers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • with security tension screw key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • with hexagon nut for strutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • Special Pipe testing stopper with pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • Stoppers for pipe testing device/pipe testing stoppers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • with turning handle, extended distance pipe and quick-lock coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 • with bypass, ball valve and air connector type 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • combined testing stopper with ball valve and air connector type 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • with hose nozzle or quick coupling connector type 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • with a wing nut, y-piece with ball valve and with hose nozzle outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Repair technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 • End cap holder “Perk system” – patented . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 • Hydraulic squeezing device to close steel pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 • Repair patches with thermo sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 • s+b mounting device for repair patches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 • Bridging cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 • Designed für cables and pipes with blank clamping positions. Zinc coated flexible

conductor strap with stainless steel springs and plastic handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 • Designed for blank and insulated pipes. Pressure plate and ring cutting device made of hardened steel with gunmetal finish. Butterfly nut, chain and threaded rod made of zinc coated steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 • Extensions for bridging cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

• Pressure and vacuum pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 • Water pump made of high-grade steel for quick evacuating of water . . . . . . . . . . . . . . . . . . . 24

Sewage testing and stop-off technology Inspection technology

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Socket testing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 • KOMUP/KOMUP DUO – Compact socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 • KOMUP – foldable construction, 60 mm stroke, with chassis, in series with

special sealing rubber tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 • Replacement double hollow chamber profile for KOMUP, in series with integrated valves . . . . . . . 28 • KOMUP DUO – self-testing because of additional referential testing chambers . . . . . . . . . . . . . . . . . . 28 • Replacement hollow chamber profile for KOMUP DUO, in series with integrated valves . . . . . . . . . 28

• MB – Multi-range socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 • MPG Maxi – Socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 • egg-shaped profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 • MPG Mini – Socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 • MPG Powerline – Socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 • one piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 • MUPP UNO/MUPP DUO – Socket testing device with plexiglass testing chamber . . . 27 • MUPP UNO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 • SMP – Hollow chamber profile (replacement) for MUPP UNO made of natural rubber . . . . . . . . . . . . . 27 • MUPP DUO – self-testing through additional reference testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 • SMP – Hollow chamber profile (replacement) for MUPP DUO made of natural rubber . . . . . . . . . . . . . 27 • OMPP – Socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 • OMPP – one piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 • OMPP – three pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Product program | Testing and sealing technology for piping constructions

• Para protection rubber band, shore hardness of 35 ° +/- 5 ° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 • SANKOMUP – Compact socket testing and restoration device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 • SANMUPP – Socket testing and restoration device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 • SMP – Replacement hollow chamber profile for socket testing devices . . . . . . . . . . . . . . . . 29 • städtler + beck MD – Multi-range socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 • Accessories for all socket testing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Manhole testing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 • Manhole testing device, fixed hanging fixture, with trapezoid spindle . . . . . . . . . . . . . . . . . . 30 • städtler + beck MD – Multi-range manhole testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 House connection inspection technology (HA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 • Accessories for test and location devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 • House connection socket testing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 • Testing and locating device for house connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Testing pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 • Accessories for testing pump – mechanical, two levels, up to 320 bar . . . . . . . . . . . . . . . . . 32 • Testing pump, mechanical, bis 60 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 • with electric motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 • mechanical, two levels, up to 320 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Measuring instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 • DMS 5.0 - Data measuring and memory unit including software . . . . . . . . . . . . . . . . . . . . . . . . . 32 • Additional sensors for measuring range extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 • (pressure and vacuum sensors) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Tightness testing cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 • UniMess – Universal Measuring Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 • Accessories for the UniMess – Universal Measuring Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 • Accessories for the positioning eg: socket pressure control under water . . . . . . . . . . . . . . 33 Sliding TV cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 • Accessories for all strip chart recorders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 • RiFlexio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 • s+b 1320 SLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 • s+b camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 • s+b HA camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 • Strip chart recorder for pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 • Swivel head sliding camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Sewage Bags technology

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Testing and stop-off bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 • Drain sealing bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • cylindrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • conical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 • Jumbo-Light – Multi-profile stop-off bag 1.0 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 • MDA™ 1 bar – Multi-dimensional stop-off bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 • Stop-off bag with with air quick connection coupling type 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 • Testing bag and stop-off bag air quick connection coupling type 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 • Socket testing/double stop-off bag with testing chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 • Shifting stop-off bag with ball valve, pressure gauge and 1.5 m shifting hose . . . . . . . . . . . . . . . . . . . .35 • Shifting test bag with ball valve, pressure gauge, 1.5 m shifting hose

and air quick connect coupling type 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 • MD – Multi-dimensional high pressure stop-off bag, 6.0 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional high pressure stop-off bag, 12.0 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional high pressure stop-off bag, 30 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional long pipe bag, type DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • MD – Multi-dimensional stop-off bag, 0.8 - 1.5 bar, egg-shaped . . . . . . . . . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional stop-off bag, 1.0 - 2.5 bar, with towing eye on both sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional stop-off bag, 1.0 up to 2.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional stop-off bag 2.5 bar, made of special rubber . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional stop-off bag, 2.5 bar, short version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 • MD – Multi-dimensional stop-off bag, large profile (cushion form) . . . . . . . . . . . . . . . . . . . . . . . 35 • Protection rubber for all MD stop-off and testing bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • städtler + beck – Drain testing and stop-off bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • städtler + beck MD – Multi-dimensional stop-off bag, 1.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • with integrated security valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • made of Chloroprene, oil and chemical-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • short version with accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • städtler + beck MD – Multi-dimensional stop-off bag, 1.5 bar up to 4.0 bar . . . . . . . . . . 37 • s+b RPG, 1.5 bar, max. back pressure: 0.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 • s+b RAGH, 4.0 bar, max. back pressure: 1.0 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Testing and bypass bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 • Accessories for all bypass bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 • Accessories for all MD – Multi-dimensional bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 • Accessories for the extension as bag testing unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 • Big profile/egg-shaped testing bags (cushion) 0.5 bar up to 1.0 bar . . . . . . . . . . . . . . . . . . . . 38 • egg-shaped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 • Float with connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 • Jumbo-Light – Multi-range bypass bag 1.0 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 • MD – Multi-dimensional bypass bag 1.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

• MD – Multi-dimensional bypass bag 2.5 bar, made of special rubber . . . . . . . . . . . . . . . . . . . 38 • MD – Multi-dimensional high pressure bypass bag 30 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 • MD – Multi-dimensional manhole testing bag 0.5 - 1.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 • MD – Multi-dimensional testing or bypass bag 1.0 bar bis 2.5 bar . . . . . . . . . . . . . . . . . . . . . . . 39 • MD – Multi-dimensional testing or bypass bag 1.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 • MD – Multi-dimensional testing or bypass bag 2.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 • städtler + beck – general accessories for s+b products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 • städtler + beck MD - Multi-dimensional testing or bypass bag 2.5 bar . . . . . . . . . . . . . . . . 39

Plug technology

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pipe end plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 • Pipe end plug with two hollow chamber profiles and bypass (pneumatic) . . . . . . . . . . . . . 40 • one piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 • two pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 • three pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 • four pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 • five pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 • Pipe end plug with two hollow chamber profiles and bypass (pneumatic) – egg shaped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 • Pipe end plug with two rubber gasket elements and passage (mechanical) . . . . . . . . . . 40

Branch and pipe end plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • Branch and pipe end plug (mechanical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • with one rubber gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • with two rubber gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 • Replacement gasket made of natural rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • Branch and pipe end plug (mechanical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • Product versions for branch and pipe end plug (mechanical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • Branch and pipe end plug (mechanical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • from DN 12 up to DN 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • from DN 80 up to DN 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • Branch and pipe end plug (mechanical), high-pressure configuration . . . . . . . . . . . . . . . . . . . 42 • DN 14 up to DN 500, max. back pressure: 16 - 4.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 • DN 80 up to DN 500, max. back pressure: 40 - 12 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 • solid steel, DN 14 up to DN 800, max. back pressure: 100 - 18 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 • Branch and pipe end plug (mechanical), with passage and ball valve . . . . . . . . . . . . . . . . . . . 42 • Branch and pipe end plug (pneumatic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • Replacement rubber gasket elements for mechanical branch and pipe end plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 • made of natural rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 • Perbunan quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 • Securing rings for pipe end plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Renovation technology

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reconstructing packers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 • Reconstructing packers, flexible version, 1.0 bar up to 2.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 • Reconstructing packers, long version, 0.6 bar up to 1.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 • Reconstructing packers, short version, 1.0 bar up to 2.5 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 • Replacement rubber bandages for flexible packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 • Replacement rubber bandages for short packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

House connection reconstructing packers (HA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 • HA Reconstructing packer, 2.0 bar up to 3.0 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 • HA Reconstructing packer, egg-shaped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 • HA Reconstructing packer type T90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Pipe cleaning technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 • Pipe cleaning balls – polished sponge rubber balls, type HM, medium porous, water resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 • Pipe cleaning brush with body made of High Density Polyethylene . . . . . . . . . . . . . . . . . . . . . . 44 • Pipe scraper, Polyether foam system with coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Personal protective equipment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gas measuring and gas alarm units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • GasAlertMicro5 IR Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • Microtector II G 460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • Self rescue system Oxy K50-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Safety devices and rescue equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • Accessories for Fresh air mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 • Fresh air mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 • Rescue lifting equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • Tripod with rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

General accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 • Drain mirror with frame for optical inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 • Handheld searchlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 • Lifting aid for duct cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 • Magnetic quick seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 • Portable drainage cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Gas

Gas stop-off technology

Product program | Testing and sealing technology for piping constructions

Pipe drilling and bag positioning devices Pipe drilling units All städtler + beck pipe-drilling devices allow drilling a pipe without any gas or water leakage. For years, städtler + beck uses a unique system, named IKSK, which provides intelligent and continuous control of the power applied to the cutting tool. This system is based upon a special spring, which is loaded in order to automatically apply pressure to the cutting tool. In this way, städtler + beck pipe cutting devices feature a number of unique characteristics: • High torque level • Uniform drilling results • Less wear on the cutting tool and absorption of shocks As a result, these devices need 50 % less time when compared to conventional pipe drilling devices. Due to reduced wear, operating costs are 65 % lower while cutting tools last longer.

Drilling device for drilling gas and water pipes without loss The drilling and tapping device “MINI” is the economical solution for all situations where metal and plastic lines or pipes under pressure up to 10 bar have to be drilled with a drilling diameter of up to 2½". Type: 1001; 2001; 2002; 2003

• Drilling device “MINI”, 1" - 2 ½", feed 130 mm/15 bar Our drilling and tapping devices have been technically improved and are stable and easy to use. With their continuous spring-loaded feeding mechanism in connection with a special circular pipe cutting saw, they deliver the best drilling results with a minimal amount of energy consumed in the shortest time. • Drilling device “MAXI”, 1" - 6", feed 250 mm/15 bar • Drilling device “MAXI”, 1" - 6", feed 480 mm/15 bar • Drilling device “MAXI”, 1" - 6", feed 700 mm/15 bar

Accessories for all tapping devices

Type: 2004; 2005; 2006

• Freewheel crank, 13 mm four-cornered • Compressed air drive for all tapping devices • Compressed air maintenance unit without Pressure Reducer and framework of metal • Compressed air maintenance unit with Pressure Reducer and framework of metal • Center drill with barb • Center drill with magnetic disc, for cutting 55 mm • Center drill made of super-speed steel • Center drill with cutting-alloy tips • Reinforcement disc, 3" - 4" and 5" - 6" • Steel transport case “MINI” • Steel transport case “MAXI” • Adapter for Cutting uptake internal thread on version with external thread • Cutting uptake from 1 ½" - 6" and 1" - 1 ¼" • Drilling and tapping device dome, 1" - 6" • Threaded flange, 1" - 6" • Circular cutter HSS, HM, PE forr 1" - 6" pipe drillings

Gas

Bag positioning devices MDA™ safety technology backed by tradition and experience. Bag positioning devices to temporarily stop-off gas pipes according to BRG 500 regulations. All MDA™ bag positioning devices (both single and double bag positioning devices) are DVGW certified. MDA™ bag positioning devices are the only DVGW-certified double bag positioning devices on the market with the following features:

DVGW product

DG 4521BR0184

• Position of both bags into one direction (against the pressure) • B oth bags are connected sequentially, using the full diameter of the setting sleeve for lower load on the material during positioning and pulling especially of the 2nd bag • Each bag features its own air inlet • Exchanging of a bursted bag is not necessary since the second bag is able to hold the pressure until work on the pipe is completed • S ince both bags are inserted towards the direction of the pressure and not towards the working area, less space and therefore less excavation work is required • Measuring the pre-pressure allows controlled release of the pressure between bags • A gas insert allows releasing pressure, flushing and re-filling of the workspace MDA™ bag positioning devices are also available for water pipes, long-distance energy pipes and applications of the chemical industry.

HA MINI bag positioning device (house connection) – Bag positioning devices especially developed for building gas house connections, consisting of Gas pipe insert, Bag positioning pipe, Positioning struts and Transport case. These HA bag-positioning devices are the only ones on the market, which can be used in combination with bow-shaped ball valves. In combination with water pipes, the use of special high-pressure bags allows the use with operating pressures of up to 2.5 bar. Due to the well-known insertion technology, the use of 2 setting devices allows releasing the tension of the space between bags or flushing the pipe. Type: 080

• HA Mini bag positioning device, ¾" - 2 ½" Patent No: 198 46 088.0

• Bag for HA Mini bag positioning device, ¾" - 2 ½" • Transport case made of wood, suitably for both HA Mini bag positioning devices

Bag positioning devices for double stop-off bags with the funktion to release the tension between bags – DVGW certified, Certification no. 4521BR0184 This system allows positioning and controlling of two bags in sequential order with only one bag positioning device or one set of positioning struts. Each bags features its own air inlet. In this way, both bags can be filled independently. Any damage of the pressure-side bag does not automatically affect the second bag. This technique requires only drilling and consequential sealing of one insertion hole on each side of the working space without sacrificing the security of two stop-off bags. A third injection device allows releasing the pressure of the space between both bags. Gas leakage into this space is released via a hose leading to the street level. Type: 080

• MDA™ double bag positioning device with preasure release; DN 80 - DN 300 • Conversions set for double bag positioning devices for 1 bar MDA™ bags; DN 200 - DN 300 • Double bag positioning device with preasure release (only fabric bags); DN 80 - DN 300

DVGW product

DG 4521BR0184

Product program | Testing and sealing technology for piping constructions

Bag positioning devices for stop-off bags with pressure release DVGW product

DG 4521BR0184

– DVGW certified, Certification No. 4521BR0184 The use of a s+b bag positioning device for stop-off bag with pressure release allowes the temporary lock in front of supply lines without leakage of gas and the continuously measurement of pressure at the same time. With the locks of both bag positioning devices it is possible to de-gas the duct section to be separated. For security reasons this will be done preferably by rinsing with Inert gas. • Bag positioning device with pressure release; DN 300 - 600 mm

Accessories for bag positioning devices

Type: 080

Type: 080; 084; 085; 087

• Positioning struts with fittings MDA™ • Positioning struts with fittings (fabric) • Set pipe for MDA™ double bags; DN 50 - DN 210 • Set pipe for double bags with fabric cover; DN 250 - DN 300 • Gas lock with 2 ½"-connection • Threaded clamp between gas lock • Closing cap • Clamping set for cap • Gas insert for plug positioning device or magnetic rod, 2 ½" • Plug positioning strut with retaining strut • Magnetic strut • Ball valve, 2 ½" • Adaptor between ball valve and sleeve 2 ½" • Wooden case for bag positioning device for double bags • Telescope blow-off pipe (De gassing lance) • Weld-on sleeve, 2 ½" x 2" internal thread • Weld-on plug, 2" external thread, M10 internal thread

High pressure blocking technology Pipe drilling and HA stop-off device until 1 bar pipe pressure 1 to 2 ½" – For drilling and temporarily blocking gas house connections The stop-off device is mainly used to block high pressure gas pipelines, thereby the gas emission is limited to the maximum capacity of the sluice. The HA type safely blocks house connections to 2½". We offer the stop-off device with or without primary pressure measurement, so there‘s no need for another temporarily suppressor. In the water and long-distance heating area the device is applicable up to 6 bar line pressure. The plugs can easily be fitted with the milling cutter and plug adapter, and after being drilled they can be grouted. The ability to rewarp them is most important, which afterwards allows a troublefree traction.

Type: 281

• H SE lock setting device 1" - 2 ½" including stoppers, sleeves, plugs, cutter, pipe drilling device, transport case • Rubber lock-off piston with threaded connection HSE, 1" - 2 ½" • Rubber lock-off piston with threaded connection HSE with pressure measurement, 1" - 2 ½"

HSG 300-4, hydraulic Plug setting system 4 bar

Type: 6900

– Designed for temporary stopping-off of gas and water pipes made of all materials with an operating pressure of max 4 bar. • Lower material costs, since only the two-piece T-piece with flange and threaded insert remain at the building site • Maximum safety and minimum wear due to the use of our novel special stopples to shut off pipes with an operating pressure of up to 4 bar The städtler + beck principle of spring-loaded drilling and the use of our low-cost, low wear cutting tools result in fast and cost effective pipe drilling. Due to the modular design of our newly developed unit, users are able to combine a pipe-drilling unit tailor-made for their specific application range, without having to buy a complete system.

• Drilling and tapping device for HSG 300; DN 200

pneumatic drive for drilling and tapping device • Pneumatic drive for HSG 300-4

hydraulic stopple operation and pressing device – with hydraulic pump, piston rod, set up gear unit and receiving sleeve for end plug • hydraulic stopple operation and pressing device, complete; DN 80 - DN 300

T-piece with flange, two pieces • T-piece, 6" internal thread, two pieces; DN 80/200 and DN 100/200 • T-piece, 6" internal thread, pipe external diameter 168.3 mm, two pieces; DN 150/200 • T-piece, 12" internal thread, pipe external diameter 219.1 mm, two pieces; DN 200/350 • T-piece, 12" internal thread, two pieces; DN 250/350 and DN 300/350 • T-piece, 6" internal thread, pipe external diameter 159.0 mm, two pieces; DN 150/200

End plug with inner square 32 mm and O-ring seal – for T-piece with flange • End plug; DN 150 - DN 300

Blind flange PN 16 with sealing, screws and nuts • Blind flange PN 16; DN 200 - DN 350

Combination gas lock between pipe drilling device and lock, flange on both sides DN 200 / DN 350 PN 16 – also matches magnet and stopper positioning strut, includes sealing rings, screws and nuts. • Combination gas lock, PN 16, 125 mm high; DN 200 • Combination gas lock, PN 16, 225 mm high; DN 350

Adapter between pipe drilling device and combination gas lock • Adapter; from DN 200 to DN 350

Adapter between Stopple device and special gas lock • Adapter/special gas lock; DN 200 • Adapter/special gas lock; DN 350

Gas

Product program | Testing and sealing technology for piping constructions

Cutting uptake • Cutting uptake; DN 80 - DN 300

HSS center drill with barb • HSS center drill; DN 80 - DN 300

Center drill shaft • Center drill shaft; DN 80 - DN 300

HSS Bimetallic circular cutter • HSS Bimetallic circular cutter; DN 76 - 300

Special closing plug • Special closing plug; DN 74 - 200

Flange with gasket unit for magnet and plug positioning rod, PN 16 • Flange with gasket unit; DN 200 - DN 350

Magnet rod and plug positioning rod – with supporting rod, wrench SW 24 and SW 22 for tightening/releasing the supporting rod and end plug • Magnet rod • Plug positioning rod for Supporting rod 800 mm

Gas

Testing and stop-off bags Gas stop-off bags Manufacturing and repairing gas stop-off bags of all brands and for a wide variety of applications is our speciality. No other manufacturer can point to a manufacturing depth of 100 %. Our bags are made according to the highest quality standards. We carefully select suitable fabric materials, which we convert into highly functional stop-off bags at our manufacturing site in Speyer, Germany. The inside layer made of rubber confirms to all industry standards, as well as the DVGW regulations. Our certified MDA™ stop-off bags are designed for manual positioning or for the use in combination with bag positioning devices. They are the result of our continuous research and development.

MDA™ 1 bar – Multi dimensional Gas stop-off bag – DVGW certificate DG-4520BRO183 - connection depending on bag positioning device, for example s+b, VEW double bag positioning device, etc. s+b MDA™ stop-off bags are made with a unique rubber, which was designed to allow especially high internal pressures. Even for DN 300 bags, the maximum counter-pressure of our MDA™ bags is 500 mbar, which is truly unique for stop-off bags of this type. In comparison to conventional testing and stop-off bags (fabric bags), the new MDA™ bags offer a number of vital advantages: • Excellent gas tightness due to a special rubber type

DVGW product

DG-4520BR0183

• P erfect positioning of the bag as soon as pressure is applied in combination with extreme mechanical resistance • Conical shape for superior flexibility and easy insertion even through bends • Highly resistant against temperature, oil and chemicals • Designed for easy positioning with the help of MDA™ bag positioning devices up to 1 bar; • Compatible with practically all bag-positioning devices on the market • max. back pressure: 1.0 - 0.5 bar Do to their temperature/heat resistance and its high resistance against oil and chemicals, MDA™ bags are ideal for stopping-off: • Long-distance energy pipelines • Pipelines of the chemical industry Comprehensive tests in cooperation with various utility providers and users supports the superior reliability of the new generation of MDA™ stop-off bags. MDA™ stop-off bags are available as single bags with and without pressure measurement, as double bags with tension release of the space between bags or as bags for manual positioning with T-piece, ball valve, pressure gauge and conical rubber stopper.

for single bag positioning device without pressure measurement • MDA™ 1 bar, single bag; DN 50 - DN 315

Type: 110

for single bag positioning device with pressure measurement • MDA™ 1 bar, single bag, with pressure measurement; DN 50 - DN 315

Type: 110

Product program | Testing and sealing technology for piping constructions

for double bag positioning device with or without pressure release • MDA™ 1 bar, double stop-off bags with pressure release; DN 50 - DN 315

Type: 110

for manual positioning with T-piece, ball valves, manometer and conical rubber plug • MDA™ 1 bar, bags for manual positioning; DN 50 - DN 315

Type: 110

Gas stop-off bags for bag positioning devices of all manufacturers – only DVGW certified fabric setting bag, certificate No. DG-4520BS0461 – max. back pressure: 0.8 - 0.2 bar

Single bag for s + b single bag positioning device • Single bag, with pressure measurement; DN 80 - DN 400

Type: 090

• Single bag, without pressure measurement; DN 80 - DN 400

Type: 091

Single bag for double bag positioning device “VEW” Type: 092

• Single bag; DN 80 - DN 300

Single bag for single bag positioning device “H+B” size 1 • Single bag, without pressure measurement; DN 50 - DN 200

Type: 093

• Single bag, with pressure measurement; DN 50 - DN 200

Type: 093

Double bag for s+b positioning device • Double bag, for s+b positiong device, with pressure release; DN 80 - DN 400

Type: 095

• Double bag, for s+b s+b positiong device, without pressure release; DN 80 - DN 400

Type: 096

Double bag for positioning device “Manibs” • Double bag, with pressure release, G 212 for J 125; DN 80 - DN 300

Type: 097

• Double bag, without pressure release, G 212 for J 125; DN 80 - DN 300

Type: 099

Stop-off bag with long hose (approx. 600 mm) without protective cover • S ingle rubber stop-off bag, with long hose (~600 mm), without protective cover; DN 50 - DN 800

Type: 111

Gas stop-off bag with conical rubber plug – max. back pressure: 0.8 - 0.04 bar

with probe • Single bags, with probe, T-piece, ball valve and pressure gauge; DN 40 - DN 1600

Type: 120

without probe, equipped with quick connection type 26

Type: 121

• Single bags, without probe, equipped with quick connection type 26; DN 40 - DN 1600

Gas double stop-off bag without pressure release – each bag with its' own air supply – max. back pressure: 0.7 - 0.04 bar • Double bags, without pressure release, with own air supply; DN 80 - DN 1600

Type: 130

Gas

Gas stop-off bag with pressure measurement – with cross fitting, two ball valves and pressure gauge as well as conical rubber plug – max. back pressure: 0.8 - 0.04 bar • Single bag, with 2 ball valves; DN 40 - DN 1600

Type: 140

Gas stop-off bag with extra strong special cover – T-piece, ball valve and pressure gauge as well as with thread and tightening nut for close injecting of the conical rubber plug – max. back pressure: 1.0 - 0.04 bar

• Single bag, special cover, T-piece, thread and tightening nut; DN 40 - DN 1600

Type: 160

Gas double stop-off bag with extra strong special cover – each bag with own air supply as well as with thread and tightening nut for close injecting of the conical rubber plug – max. back pressure: 1.0 - 0.04 bar

without pressure release • Double bag, without pressure release, with own air supply; DN 80 - DN 1600

Type: 170

with pressure release • Double bag, with pressure release, with own air supply; DN 80 - DN 300

Type: 171

Manual insertion gas stop-off bag – installed on a 1 m PA-hose with an inner steel spiral on the inside as guidance and filling linkages – max. back pressure: 0.8 - 0.04 bar

with T-piece, ball valve/air connector type 26 and one pressure gauge with protective cap • Single bag, flexible version, with pressure gauge; DN 40 - DN 1600

Type: 180

with quick connection coupling type 26, without pressure gauge • Single bag, flexible version, without pressure gauge; DN 40 - DN 1600

Type: 181

with pressure gauge and Perbunan coated cover, equipped with T-piece, ball valve/ Type: 182 air connector type 26 as well as pressure gauge with protective cap • Single bag, flexible version, Perpunan coated cover, without pressure gauge; DN 40 - DN 1600

Double bag for Nitrogen-Hydrogen mixture-weld – version with additional cover made of aluminium-coated fibreglass, connected with a highgrade steel waving hose for filling the intermediate space with Nitrogen-hydrogen mixture for a perfect welding seam – max. back pressure: 0.8 - 0.04 bar • Double bag, cover made of aluminium-coated fibreglass; DN 40 - DN 1600

Type: 185

Single bag for Nitrogen-Hydrogen mixture-weld – version with additional cover made of aluminium-coated fibreglass – max. back pressure: 0.8 - 0.04 bar • Single bag, cover made of aluminium-coated fibreglass; DN 40 - DN 1100

Type: 186

Pipe termination stop-off bag – with robust plastic surface • Pipe termination stop-off bag, cylinder-shaped; DN 40 - DN 1600

Type: 190

Product program | Testing and sealing technology for piping constructions

Manual insertion testing bag/stop-off bag – with additional rubber bag (outside) for leak testing or closing of rain water pipes, etc.. Installed on a 1 m PA-hose with an inner steel spiral as guidance and filling linkages; Equipment: T-piece with ball valve/Air connector type 26 as well as pressure gauge with protective cap – max. back pressure: 1.0 - 0.3 bar. Type: 192

• Testing bag for rainwater pipes; DN 50 - DN 300

Replacement covers for all s+b Gas stop-off bags Plastic covers

for Type: 120; 130; 140; 190 Type: 102

• MDH plastic cover; DN 40 - DN 1600

Special plastic covers

for Type: 160; 170

• HDH special plastic cover; DN 40 - DN 1600

Type: 103

Special cover made of aluminum-coated glass fibre foil (welding sparks) - suitably for all fabric bags • FFH cover, made of aluminium-coated glass fibre foil; DN 40 - DN 2000

Type: 104

Replacement rubber bags for all stop-off bags made of natural rubber

for Type: 120; 130; 140; 180; 190

• Replacement rubber bag made of natural rubber; DN 40 - DN 2000

made of chloroprene rubber, very well oil and chemical-resistant

Type: 120 for Type: 120; 130; 140; 180; 190

• Replacement rubber bag made of Chloroprene; DN 40 - DN 2000

Typ: 120

HA gas stop-off bag for house connections installed onto PA pipe – with internal steel spiral, 800 mm long, PA tube ø 8 - 10 mm

Type: 103

• HA bag, with bicycle valve, ¾" - 2 ½" • HA bag, with car valve, ¾" - 2 ½" • HA bag, Superflex, with bicycle valve, ¾" - 2 ½" • HA bag, Superflex, with car valve, ¾" - 2 ½" • HA bag, short bag, with bicycle valve, ¾" - 1 ¼" • HA bag, short bag, with car valve, ¾" - 1 ¼" • HA bag 3", with car valve • HA bag 3" - 4", type RV 35/70, with PA pipe 10 mm, 800 mm long • PA pipe with steel spiral, 8 mm and 10 mm • HA replacement bag, ¾" - 2 ½" • HA replacement short bag, ¾" - 1 ¼"

Accessiores for HA stop-off bags (house connection) Testing head with pressure gauge – opening with bicycle- or car valve for filling the stop-off bag, closing with air nipple valve type 20, connection to stop-off bag. • Testing head with pressure gauge, up to 4,0 bar

Type: 103

Hand pump • S mall hand pump with non-return valve, T-piece, pressure gauge up to 4 bar, 0.5 m inflating tube (braided hose with inside diameter of 4 mm) and closing lever for car valve • Hand pump, small with inflating tube 0.5 m, suitable for sleeve 9 mm

Gas

Insertion technology (HA) Our concern was always a gas stop-off operating respectively and operating under less dengerous circumstances, especially in relation to house connection. Starting with the first drilling device we‘ve exclusively produced pipe drilling units. Today therefore we possess the largest global range of testing and blocking devices (HA): A series of patent-registered technologies like the gas lock for gas-free insertion of a TV camera (Patent-No.10316842.7), the development of a special pipe stopper (Patent-No. 202 14 556.5), or our new universal hose adapter for städtler + beck HAT‘s for an easy installation of all gas lock systems without additional welding are evidence of our capabilities.

Gas lock for gas-free insertion of a sliding TV camera – for inserting into gas or water pipes with pressures of up to 10 bar The TV gas lock makes it possible to insert a sliding TV camera for inspection of gas pipes without the leakage of gas. In the process, it is possible to push the sliding tv camera continuously and as far as you require over the pipe to be inspected. By a new and patented procedure it is possible to move the sliding TV camera flexibly and free of gases. Thus the current status of a gas pipe can be investigated, when gas bags burst or are destroyed inside the tube during a closing off.

Patent No. 10316842.7

It is also possible to watch the pipe connections, especially if material is being changed. With the städtler + beck TV gas lock system you can also record storage tanks, sliders and other installations.

Type: 8000

• HA gas or water lock, for closed pipes; 1 bar up to 10 bar • Transport case for gas or water lock

HA Glove lock for house connections (Gas) to change the HAE (main blocking device) – for gas-free changing of T-pieces, fixtures or fittings of gas pipes that are still in use in house installations. • HA glove lock, conection 1" - 2 1/2"

Type: 700

Hose for main gas connection – with axial ball valve ¼", on the one side 1" to 3" external thread with flat sealing, on the other side with stopper box ½" for bag pole • Hose for main gas connection, external thread 1" - 3"

Type: 281

Product program | Testing and sealing technology for piping constructions

Adapter for all hoses for main gas connection with 2" external thread – on the one side with 2" internal thread, on the other side with 1" to 3" external thread with flat sealing

Type: 281

• Adapter 2" internal thread on 1" external thread up to 2" internal thread on 3" external thread

Universal hose adapter for s+b-HAT’s for the use of different gas hose systems – in the range of house connection techniques, to be mounted on smooth pipe ends and weld sockets without external thread s + b HAT’s is an essential assistent for fast and easy connection of s + b gas locks on house connection pipes, T-pieces and all applications, for which additional welding work/weld sockets should be avoided. • Universal hose adapter for s+b HAT’s; 1" - 3"

Type: 281

Inspection technology Gas testing and leakage measuring device for leakage measurement accordingly DVGW-TRGI G 600 mechanical testing and leakage measuring device “System Kräwer” – with all connections and fittings for leakage measuring, hand air pump with adapter, 2 x 2 m connecting hose with closure couplings, measuring cup, stop watch, one filling of frost resistant measuring fluid and a carrier bag • mechanical testing and leakage measuring device „System Kräwer“

Type: 446

electronic testing and leakage measuring device type “s+b Quickmess” – leak test according TRGI G 600 with test pressure of 150 mbar; evaluation of the pipe volume, preliminary test according to TRGI G 600, main test according to TRGI G 600, gas regulator test (SAV), flow velocity based on Prandtl, gas leak detection, leak test of trinking water lines (TRWI), evaluation of the serviceability of gas pipes according to TRGI G 624 with DVGW type certificate DG4805BQ0012 • electronic testing and leakage measuring device type “s+b Quickmess”

Type: 446

Precision pressure gauge for main check accordingly DVGW-TRGI G 600 made of plexiglass with engraved mbar markings

Type: 450

• Precision pressure gauge made of plexiglass, 50 mbar water head up to 200 mbar water head • Protective sleeve for 50 mbar water head up to 200 mbar water head

made of plexiglass in u-shape, mounted on wooden board • Precision pressure gauge in u-shape, 50 mbar water head up to 200 mbar water head

Type: 460

Gas

Coloured measuring fluid – Frost-proof to -40 °C, viscosity 1.0

Type: 462

• Measuring fluid, 100 ml bottle • Measuring fluid, one-litre bottle • Small funnel

ISOTEST 4S insulation test unit – High-voltage tester to verify the freedom from pores and the pressure tightness of pipes’ Type: 500 surface coatings and jackets between the house connection and the pipeline. • Isotest 4S with charger and leather case • Universal charger 230V/50Hz • Aluminum transport case • Lead cable for coiled electrodes • Drag grounding with cable shoe • Coiled electrode • Semi-rounded brush

House line gas pipe testing device, 1 bar/150 mbar – Combined measuring device for conducting pre-test and main testing on gas supply lines according to DVGW-TRGI or TRF. The testing device consists of a testing pump mounted on a board, manufactured from precision steel pipe, with outlet for a connected pressure gauge with bourdon tube. A plexiglass water container is also located on the board with an unscrewable water column for displaying a testing pressure of up to 150 mbar during the main test. The testing pump is set up with fittings, screw joint and distributing piece and multiple ball valve so that the burden test via the pressure gauge with 150 mbar via the plexiglass water container with screwed-on water column can be started and carried out one after the other by pressing the ball valves. Type: 401

• house line gas pipe testing device, completely equipped, but without case and without stoppers • Transport case for house line gas pipe testing device

Product program | Testing and sealing technology for piping constructions

Stop-off technology Stoppers for pipe testing device/pipe testing stoppers – max back pressure: 1 bar

with turning handle, extended distance pipe and quick-lock coupling

Type: 402

• Stopper for pipe testing device, cylindrical; DN ½" - DN 3" • Stopper for pipe testing device, conical; DN ½" - DN 3"

with bypass, ball valve and air connector type 26

Type: 410

• Stopper for pipe testing device, cylindrical; von DN / " bis DN 4" 3 8

• Stopper for pipe testing device, conical; von DN 3/8" bis DN 4"

combined testing stopper with ball valve and air connector type 26 • combined testing stopper, with ball valve; DN ½ - DN 4"

Type: 410

with hose nozzle or quick coupling connector type 26

Type: 412

• Pipe testing stopper, cylindrical; DN / " - DN 4" 3 8

• Pipe testing stopper, conical; DN 3/8" - DN 3"

with a wing nut, y-piece with ball valve and with hose nozzle outlet

Type: 414

• Pipe testing stopper, cylindrical; DN / " - DN 4" 3 8

• Stopper for pipe testing device, conical; DN 3/8" - DN 4"

Special Pipe testing stopper with pressure gauge – measuring range selectable

Type: 441

• Pipe testing stopper with pressure gauge, cylindrical; DN ½" - DN 3" • Pipe testing stopper with pressure gauge, conical; DN ½" - DN 3"

Pipe end stoppers with security tension screw key

Type: 442

• Pipe end stopper, cylindrical; DN ½" - DN 3" • Bayonet nut connector

with hexagon nut for strutting

Type: 443

• Pipe end stopper, cylindrical; DN ½" - DN 4" • Pipe end stopper, conical; DN ½" - DN 4" • Hexagon nut with thorn, SW 17 and SW 24

Moment plug – Branch and pipe stopper, high quality configuration – with one rubber element and clamping lever for quick locking of the end stopper • Set of diverse branch and pipe stoppers, with case; DN 18 - DN 65 • Branch and pipe end plug; DN 18 - DN 65

Type: 345

Gas

Repair technology End cap holder “Perk system” – patented – End cap holder to secure sleeves and end pieces of pressurized gas pipes or pipe ends

• End cap holder “System Perk”, up to 100 mbar; DN 80 - DN 400

Type: 9000

Repair patches with thermo sealing – for welding to steel pipes • Repair patch; DN 50/60.3 mm - DN 300/323.9 mm

Type: 5000

s+b mounting device for repair patches • s+b mounting device for rapair patches, incl. potential equalization

Type: 5000

Hydraulic squeezing device to close steel pipes • Hydraulic squeezing device, up to DN 80, with pump and case

Type: 800

Product program | Testing and sealing technology for piping constructions

Accessories Water pump made of high-grade steel for quick evacuating of water • Waterpump, with pressure and vacuum link, 1"

Type: 500

• Water pump with mounted lead foot and 1.5 m plastic hose

Type: 501

Pressure and vacuum pumps • Pressure and vacuum pump, 2.0 m hose for filling and evacuating

Type: 070

• Pressure pump, 2.0 m hose for filling

Type: 071

• hose extension

Bridging cable – 2.5 m braided copper cable with PVC insulation, ø 25 mm² Before you separate or connect a metal gas pipeline or install or remove a pipeline component, a fitting, a gas meter, a gas pressure regulator and similar components first an electroconductive bridging of the cut-off point has to be established as a protection against the dangerous contact voltage and as a protection against the ignitable flashover of flammable gas. Our bridging cables are made of flexible and insulated copper strands with a well dimensioned cross-section of 25 mm², which is consistent to the delivered maximum length of a jumper cable. The junction between the bridging cable and the gas pipe, for example, should have a contact resistance minimal as possible.

Designed for cables and pipes with blank clamping positions. Zinc coated flexible conductor strap with stainless steel springs and plastic handles. • B ridging cable, 13,5 mm to 89 mm, 89 mm to 219 mm and 219 mm bis 324 mm

Type: 070

Designed for blank and insulated pipes. Pressure plate and ring cutting device made of hardened steel with gunmetal finish. Butterfly nut, chain and threaded rod made of zinc coated steel. • B ridging cable, 60 mm to 250 mm, 60 mm to 300 mm and 60 mm bis 400 mm

Extensions for bridging cable • Extension for bridging cable, 5 m • Extension for bridging cable, 10 m

Type: 071

Sewage testing and stop-off technology

Sewage

Product range | Testing and sealing technology for piping constructions

Inspection technology Socket testing devices 35 years construction experience, project development and close cooperation with our valued customers have made our company the number one for socket testing devices! We can produce for all profiles (circular-shaped, egg, foot, dragon and box-shaped) socket testing devices or simply design and manufacture to conform with your drawing or template. We not only offer the testing devices, but, if requested, we can assist with your project from A to Z including site supervision. All städtler + beck sleeve testing devices can be used in air as well as for water leakage testing. Drainage is not necessary because all of our systems have a gateway. The self-developed profile works with a maximum pressure of up to 8 bar in combination with specific concrete soft rubber seals which provide unsurpassed sealing inside the tube.

MPG Maxi – Socket testing device – for the leak test of fittings with air or water in accordance with EN 1610 and other test standards Testing device is made of a welded steel construction with two hollow chamber profiles and a wide testing chamber. Where applicable, the parts are marked for easy onsite assembly.

Type: 930

• MPG Maxi, pneumatic, one piece; DN 600 - DN 3400 • MPG Maxi, pneumatic, two pieces; DN 600 - DN 2000 • MPG Maxi, pneumatic, three pieces; DN 700 - DN 1400 • MPG Maxi, pneumatic, four pieces; DN 1500 - DN 3400

egg-shaped profile

Type: 930

• MPG Maxi, pneumatic, egg-shaped profile, one piece; DN 300/450 - DN 1400/2100 • MPG Maxi, pneumatic, egg-shaped profile, two pieces; DN 600/900 - DN 1400/2100 • MPG Maxi, pneumatic, egg-shaped profile, three pieces; DN 700/1050 - DN 1400/2100

MPG Mini – Socket testing device – for the leak test of fittings of small pipes with air or water in accordance with EN 1610 and other test standards, with additional para rubber gaskets for improved sealing

Socket testing devices with six-wheel transport trolley and Para rubber gaskets for improved sealing, with a dismantable head end plates for easier changing of the hollow-chamber sections. The pneumatic sleeve testing devices can also be rented from us! • MPG Mini, bolted head end plate, special rubber seals; DN 200 - DN 600

Type: 930

MUPP UNO/MUPP DUO – Socket testing device with plexiglass testing chamber – Designed for sealing tests of pipe connections with air (with water as an option) in accordance with EN 1610 and other test standards in inaccessible sewers and pipes (can be adapted on all camera driving car systems).

MUPP UNO Designed for sealing tests of pipe connections in inaccessible sewers and pipes. A precise positioning of the seal testing device to the pipe connection is achieved by using a camera. This also allows a visual documentation. Available with or without self-monitoring. An integrated transport trolley with robot fixture, a camera holding fixture, and comprehensive online technical training are also standard features. • MUPP UNO, pneumatic, one piece; DN 200 - DN 600

Type: 930

SMP – Hollow chamber profile (replacement) for MUPP UNO made of natural rubber • SMP MUPP UNO, made of natural rubber; DN 200 - DN 600

Type: 930

MUPP DUO – self-testing through additional reference testing For sealing tests of pipes and canals in non-accessible drainage and canals. In addition to the actual testing chamber, the MUPP DUO socket testing device has additional referential testing chambers that ensure a direct check of the testing device itself and as such, guarantee a 100 % reliable testing result. An exact positioning of the socket testing device to the pipe connection is made possible with the use of a camera. This also provides visual documentation. An integrated transport trolley with robot fixture, a camera holding fixture, and comprehensive online technical training are also standard features. • MUPP DUO, pneumatic, one piece; DN 200 - DN 600

Type: 930

SMP – Hollow chamber profile (replacement) for MUPP DUO made of natural rubber • SMP MUPP DUO, made of natural rubber; DN 200 - DN 600

Type: 930

OMPP – Socket testing device – Designed for sealing tests of pipe socket ends, with viewing window for positioning and documentation, for conducting tests of pipe connections with air or water in accordance with EN 1610 and other test standards in inaccessible sewers and pipes.

OMPP – one piece • OMPP, pneumatic, one piece; DN 200 - DN 550

Type: 931

OMPP – three pieces • OMPP, pneumatic, three pieces; DN 600 - DN 700

Type: 931

Sewage

Product range | Testing and sealing technology for piping constructions

KOMUP/KOMUP DUO – Compact socket testing device – with closed hollow-chamber profile, utility model-protected, honored with “Success 2002” output-oriented promotion of innovation

KOMUP – foldable construction, 60 mm stroke, with chassis, in series with special sealing rubber tapes The first socket-testing device, that is collapsible and fits through any DIN shaft opening from DN 625 – even crampons are not an obstacle. KOMUP is equipped with a closed rubber hollow-chamber profile and is also equipped with an integrated rubber seal strip, working with all piping materials.

• easy and fast equipment assembly within the pipe • significant weight reduction and better handling, plus transportation cost savings • 100 % sealed by a closed rubber profile • coupling misalignment finally no longer a problem – the maximum stroke is 70 mm • full device security and stability • suitable for any pipe material and any type of test

Type: 931

• KOMUP, one piece; DN 600 - DN 1100 • KOMUP, two pieces; DN 1200 - DN 2600

Replacement double hollow chamber profile for KOMUP, in series with integrated valves • Replacement hollow chamber profile for KOMUP; DN 600 - DN 2600

Type: 931

KOMUP DUO – self-testing because of additional referential testing chambers The KOMUP DUO is the continued development of the company KOMUP socket testing device from städtler + beck that won the innovation prize of the German state of Rheinland-Pfalz. The device can be folded and fits through any manhole of DN 625. Configuration with a closed four chamber rubber hollow profile that fits to all pipe materials with the integrated rubber sealing bands. • easy and quick device assembly in the pipe • clear reduction in weight and better handling plus savings in transport costs • 100 % seal because of its closed rubber profile • 100 % assured test results because of the possibility of the referential test • Socket misalignment can be adjusted on account of 70 mm max. stroke • Suitable for any type of pipe material and any kind of test

Type: 931

• KOMUP DUO, one piece; DN 600 - DN 1100 • KOMUP DUO, two pieces; DN 1200 - DN 2600

Replacement hollow chamber profile for KOMUP DUO, in series with integrated valves • Replacement hollow chamber profile for KOMUP DUO; DN 600 - DN 2600

Type: 931

MB – Multi-range socket testing device – with integrated plexiglas testing chamber for conducting tests of pipe connections with air or water in accordance with EN 1610 and other test standards, for all materials, especially for plastic tubes made of PP, FABEKUN pipes etc., with differing inside diameters, optimally for the application within house connections (can be adapted on all camera driving car systems). Designed for sealing tests of pipe connections in non-accessible sewage pipes and canals with air. By using a camera, an exact positioning of the socket testing device to the pipe connection is possible, as well as visual documentation. The testing device is made of a welded steel construction with two wide hollow chamber profiles, a testing chamber and a pressure-resistant plexiglas window. • standard features include air nipple, type 26, individual connections according to customer requirement • individual connections available on customer request • a powder coating of the metal segments for better corrosion protection is also available. • an integrated transport trolley with robot fixture, a camera holding fixture, and comprehensive online technical training are also standard features. • MB socket testing device; DN 150/200 - DN 600/800

Type: 934

MPG Powerline – Socket testing device – for pressurised water tests up to 15 bar (pneumatic) For pressure testing of pipes and canals with water pressure up to 15 bar. Also available egg-shaped and other profile forms. The MPG Powerline is equipped with a GEKA water coupling for filling purposes as a standard feature. Different adapters are available that allow for connections to pipe cross-sections or to other connections for inserting different testing materials. A built-in four-wheel transport trolley is also a standard feature. Water container with rotary pump for water filling purposes and creation of test pressure – available with or without water reclamation, a foot air pump with pressure gauge is also available on request.

one piece

Type: 935

• MPG Powerline, one piece; DN 700 - DN 3400 • MPG Powerline, two pieces; DN 700 - DN 2000 • MPG Powerline, three pieces; DN 700 - DN 1400 • MPG Powerline, four pieces; DN 1500 - DN 3400

– Egg-shaped profile and other profiles possible. –

städtler + beck MD – Multi-range socket testing device – for air and water testing

Type: 810; 102; 810; 103; 810; 104

• s+b Multi-range socket testing device; DN 200 - DN 1000

SMP – Replacement hollow chamber profile for socket testing devices – made of natural rubber • SMP, with integrated car valve; DN 200 - DN 3400

Type: 600

Para protection rubber band, shore hardness of 35 ° +/- 5 ° – for the improved tightness of the socket testing devices with the application in porous concrete pipes • Para protection rubber band; DN 200 - DN 3400

Type: 610

SANMUPP – Socket testing and restoration device – Socket testing and restoration device with plexiglas testing chamber and camera-holding fixture for testing and restoration of almost all known injection processes (can be adapted on all camera driving car systems.) • SANMUPP; DN 200 - DN 600

Type: 930

SANKOMUP – Compact socket testing and restoration device – utility model-protected, for accessible large profile tubes, double hollow chamber profile (pneumatic), foldable, with 60 mm stroke, chassis, in series with special sealing rubber tapes, injection unit and injection skin

Type: 933

• SANKOMUP, one piece; DN 600 - DN 1100 • SANKOMUP, two pieces; DN 1200 - DN 2600

Sewage

Product range | Testing and sealing technology for piping constructions

Accessories for all socket testing devices

Type: 1000

• Adapter, GEKA water coupling with C-storz coupling, type 26 • Adapter, GEKA water coupling with air closing coupling, type 26 • Air closing coupling, type 26 with external thread ¼" • Air nipple, type 26 with external thread ¼" • GEKA water coupling with external thread ¼" • C-storz coupling with external thread 2" • Compressor coupling with external thread ¼" • Dual plunger foot air pump with pressure gauge/filling hose • Adapter = C-storz coupling with B-storz coupling • Pressure gauge with bourdon tube, Ø 63 mm, up to 1.0 bar, testing class 2.5 • Capsule element pressure gauge, Ø 63 mm, up to 400 mbar, testing class 1.6 • Precision pressure gauge, Ø 160 mm, up to 250 mbar, testing class 0.6 • Air filling hose with GEKA water coupling, T-piece, ball valve, tyre filling valve • Air testing hose with coupling type 26 and plug type 26 • Water filling hose, 8 m, both outlets with GEKA water coupling • Water testing hose, 6 m, one outlet with GEKA water coupling

Manhole testing devices städtler + beck MD – Multi-range manhole testing device

Type: 610; 101; 610

• Manhole testing device, vacuum • Injector/Vacuum blower for MD manhole testing device

Manhole testing device, fixed hanging fixture, with trapezoid spindle – infinitely variable, adjustable for height • Manhole testing device, pneumatic, 2 hollow chamber profiles; DN 625 • Manhole testing device, pneumatic, 1 hollow chamber profile; DN 625

Type: 936

House connection inspection technology (HA) Testing and locating device for house connections – consisting of: • one testing bag • one MDA push bag • a 10 m rigid PA rod with a steel spiral • a one time sealing system for the execution of the thrust hose • various adapters and a pump.

• T esting and locating device for house connections; DN 90 - DN 300

Accessories for test and location devices

Type: 992

• PA Extension hose with steel spiral • Aluminium carrying case with foam inside • Testing bag with all connections, incl. stopper socket • Testing bag without connections • Push bag with safety connection type 21 • 10 m test hose PA with quick connection • Test head for push bag • Test head for test bag • Stopper • Connection pieces

House connection socket testing device – It's the first swivelling socket testing device for testing house connection ends from the main tube – “leak test”. The house connection socket testing device makes it possible to do a leak test of house connection sockets (integrated house connections) and pipe sockets according to DIN EN 1610 or DIN 4033. Main tubes with a diameter of DN 300 - DN 700, and house connection pipes with a diameter of DN 100 - DN 210 can be locked. The house connection socket testing device has two inflatable tyres for sealing the main tube. There is a positioning tube in the “testing area”, which is positioned on the house connetion by swivel movements and camera monitoring. After this positioning an MDA stop-off bag will be pulled into the house connection over a feed device, hence providing the sealing. Now the resulting testing area can be pressurised and a leak test can be done. • House connection socket testing device; DN 300 - DN 600

Type: 937

Sewage

Product range | Testing and sealing technology for piping constructions

Testing pumps Testing pump, mechanical, up to 60 bar • Testing pump UX 60, mechanical

Type: 486

with electric motor • Testing pump MP 120 bar/11 and MP 230 bar/6, electric motor

Type: 488

mechanical, two levels, up to 320 bar • Testing pump, mechanical, two levels, 50 bar up to 320 bar

Type: 490

Accessories for testing pump – mechanical, two levels, up to 320 bar Type: 490

• Replacement pump D 50, without accessories • Replacement pump D 100, without accessories • Replacement pump D 200, without accessories • Replacement pump D 320, without accessories • 3 m pressure hose for testing pump, up to 90 bar • 3 m high pressure hose for testing pump, up to 900 bar • Galvanised steel container for testing pump, 50 l capacity

Measuring instruments DMS 5.0 - Data measuring and memory unit including software – Tightness testing case for the execution of leak tests with air and water according to EN 1610 and many more Test standards (alternatively also a different measuring range is possible) The DMS 5.0 fully complies with EN 1610 requirements for accuracy, from 10 % of allowable pressure drop. This provides the analogue-digital conversion, with an end resolution of 12 Bit.

The maximum error in respect of the absolute error of measurement corresponds to + / - 1 LSB, or + / - 0.06 mbar (250 mbar pressure sensor). The display corresponds to the value recorded in the controller to one exact decimal place (+ / - 1 mbar). The measurement is updated every 2 seconds regardless of the selected sampling rate. DMS 5.0 - System components: • Measurement and data logging unit (controller) with LED indicator • Sensor base with LCD display, power button and a PC interface • Pressure sensor 0 bis 250 mbar (as standard) • PC socket with LEDs indicating the memory status • Plastic case • Operators' manual • Stop Watch • DMS 5.0 incl. 1 pressure sensor, up to 500 mbar

Additional sensors for measuring range extension (pressure and vacuum sensors) • Pressure sensor for DMS 5.0, up to 250 mbar • High pressure sensor for DMS 5.0, up to 25 bar • Vacuum sensor for DMS 5.0, up to 600 mbar • Submerged sensor/duct testing sensor • Measuring accuracy proof, calibration through DKD/TÜV • Accessories: Watertank for water testing / type 935

Type: 970

Tightness testing cases UniMess – Universal Measuring Case – for leak testing of separator facilities, ducts and pipelines The Measurment Unit “UniMess” is a modern, universally applicable Measuring System for the inspection, control and monitoring of separator facilities, ducts and pipelines, especially designed for the examination of tanks containing light liquids according DIN 1999-100, grease products according to DIN 4040-100 and for sewer drainage piping, for example according to DIN EN 1610 passing suitable eligability rules (requires optional Fittings). The following guidelines are required for a full Software inspection. • Water Testing: ATV A 139, ATV A 142, ATV M 143-6, LfW Bayern 4.3-6, 1986 T 1, DIN 1986 article 30 and specially verified for Water • Air Testing: A 139, ATV M 143-6, LfW Bayern 4.3-6, DIN 1986 article 30 and EN 1619 Air ( Laptop not included)

To operate the Density Measuring Case with a PC or a Laptop (not supplied) the following Components for a basic installation are required: • Pressure Probe incl. Pressure equalising Vessel with an effective range of 0 - 30 cm WS • Tripod with extensions to steady the installation of the Pressure Probe • Datalogger with power supply • Interface Cable (USB) • Bluetooth Open Wireless for data exchange of the actual measured data to an independent indicator device • PC-Software UMK v1.xx (Desktop Application Program).

Accessories for the UniMess – Universal Measuring Case

Type: 970

• Tripod • Tripod Extension • Probe (Water) • Pressure Sensor; 0 - 250 mbar, 0 - 500 mbar and 0 - 25 mbar • Probe (Vacuum); 1 bar - 0 bar

Accessories for the positioning eg: socket pressure control under water

Type: 970

• Preliminary Pressure Probe; 0 - 1000 mbar • Imbalance Pressure Probe; 0 - 200 mbar • Measurement Container; 1 - 5 Litres and 5 - 30 Litres

Sliding TV cameras s+b camera • s+b camera; DN 70 - DN 300

Type: 999

s+b HA camera • s+b HA camera; DN 25 - DN 125

Type: 999

Swivel head sliding camera • Simple swivel head sliding camera; DN 70 - DN 200

Type: 999

Sewage

Product range | Testing and sealing technology for piping constructions

RiFlexio – Color TV camera with pushing rod

Typ: 999

• Color TV camera with pushing rod; with flexible module for testings as of DN 80 - DN 200

s+b 1320 SLC – Color TV camera

Typ: 999

• ColorTV camera for testings as of DN 15 - DN 40, 87° flexible as of DN 25

Strip chart recorder for pressure – portable strip chart recorder for gas, water and duct • Strip chart recorder for pressure, portable, up to 40 bar

Type: 701

– In place of the mechanical tape printer we can alternatively offer an electronic data logger –

Accessories for all strip chart recorders • Connecting hose for printer, up to 40 bar • Double nipple ½" connection for various motor test pumps • Adapter to connect mechanical pumps • Control unit for parallel measuring • Carrying case for tape printer • Graph paper 100 mm or 120 mm for single printer • Graph paper 2x 100 mm or 2x 120 mm for double printer • Writing pen • Attachment for writing pen • Diagram rolls 100 mm without time stamp • Carrying case with space for accessories for double printer • Carrying case for accessories for parallel measuring device

Type: 701

Sewage Bags technology Testing and stop-off bags The manufacturing and the selling of sewage testing and stop-off ranks among the core competencies of städtler + beck. In the standard program we have the entire product range of a world-wide transaction company, our partner, the company SAVA from Slovenia. This cooperation is complemented by our own longtime manufacturing experience. Special products and client-specific new developments remain the basis of our successful mission statement. All of our products have the GS quality stamp und and therefore meet the needs of highest quality and safety standards. These include the procesing of a high quality natural und synthetic rubber compound, reinforcing of the bags with a rayon kevlar fabric and the use of corrosion-resistant accessories like filling couplings and holding rings.

Jumbo-Light – Multi-profile stop-off bag 1.0 bar – for reliable closing of rounded-, four sided-, arch shaped, mouth shaped, U-profile open, egg-shaped, kidney shaped and other profiles, tear-resistant and heavy duty cushion fabric – max. back pressure: 0.5 bar Type: 967

• Jumbo-Light stop-off bag, approx. 1.00 kg up to ca. 150.00 kg; DN 90 - DN 2800 – we can deliver a construction facility as an option. (Please, have a look at the picture) –

MDA™ 1 bar – Multi-dimensional stop-off bag – conical, extremely flexible, ground-usable and insertable through small openings – up to 1 bar back pressure max. depending on the frame size

Stop-off bag with with air quick connection coupling type 26 • MDA™ 1 bar, stop-off bag; DN 50 - DN 315

Type: 110

Testing bag and stop-off bag air quick connection coupling type 26 • MDA™ 1 bar, testing bag, with passage; DN 50 - DN 315

Type: 110

Socket testing/double stop-off bag with testing chamber • MDA™ 1 bar, double testing bag, with testing chamber; DN 50 - DN 315

Type: 110

Shifting stop-off bag with ball valve, pressure gauge and 1.5 m shifting hose • MDA™ 1 bar, shifting stop-off bag, ball valve, pressure gauge; DN 50 - DN 315

Type: 110

Shifting test bag with ball valve, pressure gauge, 1.5 m shifting hose and air quick connect coupling type 26 • MDA™ 1 bar, shifting test bag, ball valve, pressure gauge; DN 50 - DN 315

Type: 110

MD – Multi-dimensional stop-off bag, large profile (cushion form) – usable in manholes – max. back pressure: 0.7 - 0.3 bar • MD stop-off bag, large profile/egg-shaped; DN 600 - DN 2200 and larger

Type: 962

Sewage

Product range | Testing and sealing technology for piping constructions

MD – Multi-dimensional stop-off bag 2.5 bar, made of special rubber – oil and chemical-resistant – max. back pressure: 2.0 - 0.4 bar • MD stop-off bag; 2.5 bar, oil-resistant; DN 20 - DN 1500

Type: 962

MD – Multi-dimensional high pressure stop-off bag, 6.0 bar – max. back pressure: 3.0 bar • MD high pressure stop-off bag, 6.0 bar; DN 100 - DN 600

Type: 962

MD – Multi-dimensional high pressure stop-off bag, 12.0 bar – max. back pressure: 10 bar • MD high pressure stop-off bag; 12.0 bar; DN 100 - DN 500

Type: 962

MD – Multi-dimensional high pressure stop-off bag, 30 bar – max. back pressure: 16 bar • MD high pressure stop-off bag, 30 bar, 2 pieces; DN 55 - DN 200

Type: 962

MD – Multi-dimensional stop-off bag, 2.5 bar, short version – max. back pressure: 1.8 - 2.2 bar • MD stop-off bag; 2.5 bar; DN 20 - DN 305

Type: 962

MD – Multi-dimensional stop-off bag, 1.0 up to 2.5 bar – max. back pressure: 2.0 - 0.4 bar • MD stop-off bag; 2.5 bar; DN 40 - DN 1800

Type: 962

MD – Multi-dimensional stop-off bag, 1.0 - 2.5 bar, with towing eye on both sides – max. back pressure: 2.0 - 0.4 bar • MD stop-off bag; 2.5 bar, with towing eye on both sides; DN 100 - DN 1500

Type: 962

MD – Multi-dimensional stop-off bag, 0.8 - 1.5 bar, egg-shaped – without inner sleeve • M D stop-off bag; 1,5 bar, egg-shaped; DN 200/300 - DN 250/375 up to DN 300/450 - DN 350/525 • M D stop-off bag; 1,5 bar, egg-shaped; DN 400/600 - DN 600/900 up to DN 900/1350 - DN 1000/1500 (cushion)

Type: 963

MD – Multi-dimensional long pipe bag, type DC – max. back pressure: 2.2 up to 1.9 bar • MD long stop-off bag; DC 50 - DC 150

Type: 966

städtler + beck MD – Multi-dimensional stop-off bag, 1.5 bar – max. back pressure: 0.5 bar

with integrated security valve • s+b RV, with security valve; DN 80 - DN 1000

Type: 110 201S - 207S

made of Chloroprene, oil and chemical-resistant • s+b RV, CR (Chloroprene); DN 80 - DN 1000

Type: 110 221 - 227

short version with accessories • s+b RV; DN 80 - DN 500

Type: 110 231 - 235

städtler + beck MD – Multi-dimensional stop-off bag, 1.5 bar up to 4.0 bar – specially manufactured with accessories

s+b RPG, 1.5 bar – max. back pressure: 0.5 bar • s+b RPG, 1,5 bar; DN 100 - DN 1000

Type: 210 701 - 703

• Replacement rubber for s+b RPG; DN 100 - DN 1000

Type: 210 711 - 713

s+b RAGH, 4.0 bar – max. back pressure: 1.0 bar • s+b RAGH, 4.0 bar; DN 100 - DN 1500

Type: 301 101 - 107

• Replacement rubber for s+b RAGH; DN 100 - DN 1000

Type: 310 111 - 118

Protection rubber for all MD stop-off and testing bags – reduces the damage through sharp areas or deposits at the tubing inside

• Protection rubber; DN 200 - DN 1800

städtler + beck – Drain testing and stop-off bag – max. back pressure: 0,5 bar • s+b-RV; DN 80 - DN 1000

Type: 110 201 - 207

Drain sealing bags – cylindrical sealing bag or conical rinsing catch, with 1 m air filling hose. unsuitable for pressure testing

cylindrical • Drain sealing bag, cylindrical; DN 100 - DN 1600

Type: 960

conical • conical rinsing catch; DN 60/125 - DN 1300/1500

Type: 961

Sewage

Product range | Testing and sealing technology for piping constructions

Testing and bypass bags Jumbo-Light – Multi-range bypass bag 1.0 bar – for reliable closing of rounded-, four sided-, arch shaped, mouth shaped, U-profile open, egg-shaped, kidney shaped and other profiles, non-testing and heavy duty cushion fabric – max. back pressure: 0.5 bar

Type: 968

• Bypass: D, approx. 3.60 kg; DN 150 - DN 400 • Bypass: B, approx. 12.00 kg up to approx. 190.00 kg; DN 250 - DN 2800 – we can deliver a construction facility as an option. (Please, have a look at the picture) –

MD – Multi-dimensional bypass bag 1.5 bar, egg-shaped

Type: 963

• M D Bypass bag 1.5 bar, egg-shaped; DN 200/300 - DN 250/375 up to DN 300/450 - DN 350/525 • M D Bypass bag 1.5 bar, egg-shaped; DN 400/600 - DN 600/900 up to DN 900/1350 - DN 1000/1500 (cushion)

Big profile/egg-shaped testing bags (cushion) 0.5 bar up to 1.0 bar – Bypass 2", manhole usable – max. back pressure: 0.7 - 0.3 bar Type: 936

• Big profile bypass bag, with bypass 2"; DN 600 - DN 2200

MD – Multi-dimensional bypass bag 2.5 bar, made of special rubber – oil and chemical-resistant – max. back pressure: 2.0 - 0.4 bar • MD Bypass bag, 2.5 bar, oil resistant; DN 46 - DN 1500

Type: 936

MD – Multi-dimensional testing or bypass bag 1.5 bar – with bigger passage – max. back pressure: 1.0 - 0.4 bar

Type: 936

• MD Bypass bag, 1.5 bar, with bypass 2" up to 8"; DN 100 - DN 1800 • M D Bypass bag, 1.5 bar, with bypass 3" up to 8", incl. aluminum flange R2" up to R8"; DN 150 - DN 1000

MD – Multi-dimensional manhole testing bag 0.5 - 1.5 bar – max. back pressure: 0.1 bar • MD manhole testing bag, 0.5 bar, passage 2"; von DN 600 - DN 1000

Type: 936

MD – Multi-dimensional testing or bypass bag 2.5 bar – short version – max. back pressure: 2.2 - 1.8 bar • MD Bypass bag, 2.5 bar, with bypass 1/8" up to 2"; DN 46 - DN 305

Type: 936

MD – Multi-dimensional high pressure bypass bag 30 bar – max. back pressure: 16 bar • MD High pressure bypass bag, 30 bar; DN 55 - DN 200

Type: 936

MD – Multi-dimensional testing or bypass bag 1.0 bar bis 2.5 bar – max. back pressure: 2 - 0.4 bar

Type: 963

• MD bypass bag; DN 70 - DN 200 • MD bypass bag, with bypass 1"; DN 100 - DN 300 • MD bypass bag, with bypass 2"; DN 200 - DN 1000 • MD bypass bag, with bypass 4"; DN 600 - DN 1800

städtler + beck MD – Multi-dimensional testing or bypass bag 2.5 bar – special manufactured with bypass – max. back pressure: 0.5 bar • s+b RAG; DN 100 - DN 1000

Type: 210 101 - 110

• Replacement rubber for s+b RAG; DN 100 - DN 1000

Type: 210 111 - 112

Accessories for all MD – Multi-dimensional bags

Type: 962

• Filling and safety fitting, 1.5 bar up to 6.0 bar • Security and securing rope

Accessories for the extension as bag testing unit

Type: 964

• Extension unit for equipping as bag testing unit for the leak test with water • Extension unit for equipping as bag testing unit for the leak test with air • Extension unit for equipping as bag testing unit for the leak test with water and air

Accessories for all bypass bags

Type: 963

• Bypass hose, 1", 10 m • Bypass hose, 2", 10 m, C-Storz coupling on both sides • D-Storz blank cap • C-Storz blank cap • shut-off fitting, 1", with ball valve, D-Storz coupling • shut-off fitting, 2", with ball valve, C-Storz coupling • Testing branch, D-Storz coupling on both sides

städtler + beck – general accessories for s+b products • Adapter/air pump valve for direct connection

Type: 110 414D

• Adapter/air pump valve for control mechanism

Type: 110 414S

Float with connection • Float with connection; DN 71 - DN 1200

Type: 963

Sewage

Product range | Testing and sealing technology for piping constructions

Plug technology Pipe end plugs Pipe end plug with two rubber gasket elements and passage (mechanical) – max. back pressure: 30 - 0.5 bar

Type: 300

• Pipe end plug, stopper shaped, mechanical, 2 rubber gasket elements; DN 14 - DN 75 • Pipe end plug, mechanical, 2 rubber gasket elements; DN 80 - DN 500

Pipe end plug with two hollow chamber profiles and bypass (pneumatic) – max. back pressure: 0.5 bar

one piece

Type: 300

• Pipe end plug, pneumatic, 2 hollow chamber profiles, one piece; DN 300 - DN 3000

– Also available as testing unit. –

two pieces

Type: 300

• Pipe end plug, pneumatic, 2 hollow chamber profiles, two pieces; DN 700 - DN 3000 – Also available as testing unit. –

three pieces

Type: 300

• Pipe end plug, pneumatic, 2 hollow chamber profiles, three pieces; DN 1300 - DN 3000 – Also available as testing unit. –

four pieces

Type: 300

• Pipe end plug, pneumatic, 2 hollow chamber profiles, four pieces; DN 1900 - DN 3000 – Also available as testing unit. –

five pieces

Type: 300

• Pipe end plug, pneumatic, 2 hollow chamber profiles, five pieces; DN 2500 - DN 3000 – Also available as testing unit. –

Pipe end plug with two hollow chamber profiles and bypass (pneumatic) – egg shaped – max. back pressure: 0.5 bar • Pipe end plug, pneumatic, egg-shaped; DN 250/375 - DN 1400/2100

Type: 300

Branch and pipe end plugs Branch and pipe end plug (mechanical) – for non-pressure application

with one rubber gasket

Type: 346

• B ranch and pipe end plug, mechanical, non-pressure application, one rubber band; DN 12 - DN 1000

with two rubber gaskets

Type: 347

• B ranch and pipe end plug, mechanical, non-pressure application, 2 rubber bands; DN 12 - DN 1000

Replacement gasket made of natural rubber

Type: 348

• Replacement gasket, natural rubber, for mechanical pipe end plugs; DN 12 - DN 1000

Branch and pipe end plug (mechanical) – for blocking lines of any kind – with removable wrench – max. back pressure: 6.0 - 0.5 bar • Branch and pipe end plug, mechanical, with wrench; DN 14 - DN 500

Type: 300

Product versions for branch and pipe end plug (mechanical) • Pipe distance extension each 100 mm; DN 14 - DN 500 • Socket; DN 14 - DN 500 • T-flange grip M10 for DN 20 up to DN 500 instead of Wrench • Flap-nut and bypass/ball valve, ¼" up to 2" for DN 30 - DN 500

Branch and pipe end plug (mechanical) – hight quality configuration

from DN 12 up to DN 75 – Stopper shaped – max. back pressure: 30 - 8.0 bar

Type: 345

• B ranch and pipe end plug, stopper shaped, mechanical, high quality configuration; DN 12 - DN 75

from DN 80 up to DN 600 – max. back pressure: 3.6 - 0.5 bar

Type: 345

• Branch and pipe end plug, mechanical, high quality configuration; DN 80 - DN 600 – All mechanical branch and pipe end plugs are also available with Perbunan quality gasket elements. –

Branch and pipe end plug (pneumatic) – high quality configuration – max. back pressure: 0.5 bar • Branch and pipe end plug, pneumatic; DN 200 - DN 2400 • Bypass 1 ¼" up to 2" with ball valve; DN 200 - DN 2400

Type: 345

Sewage

Product range | Testing and sealing technology for piping constructions

Branch and pipe end plug (mechanical), with passage and ball valve – high quality configuration – max. back pressure: 25 - 0.5 bar

Type: 345

• Branch and pipe end plug, mechanical, passage/ball valve, ¼"; DN 30 - DN 75 • Branch and pipe end plug, mechanical, passage/ball valve, ¾"; DN 80 - DN 235 • Branch and pipe end plug, mechanical, passage/ball valve, 1"; DN 80 - DN 235 • Branch and pipe end plug, mechanical, passage/ball valve, 1 ¼"; DN 250 - DN 400 • Branch and pipe end plug, mechanical, passage/ball valve, 2"; DN 350 - DN 600

Branch and pipe end plug (mechanical), high-pressure configuration DN 14 up to DN 500 – max. back pressure: 16 - 4.5 bar

Type: 350

• Branch and pipe end plug, with hub flange; DN 14 - DN 500 – Also available as testing unit. –

DN 80 up to DN 500 – max. back pressure: 40 - 12 bar

Type: 355

• Branch and pipe end plug, with hub flange and bearing; DN 80 - DN 500 – Also available as testing unit. –

solid steel, DN 14 up to DN 800 – max. back pressure: 100 - 18 bar

Type: 360

• Branch and pipe end plug, solid steel, with hub flange and bearing; DN 14 - DN 800 – Also available as testing unit. –

Replacement rubber gasket elements for mechanical branch and pipe end plugs made of natural rubber • Replacement rubber gasket element, mechanical, natural rubber; DN 80 - DN 600

Type: 345

Perbunan quality • Replacement rubber gasket element, mechanical, Perbunan quality; DN 80 - DN 600

Type: 345

Securing rings for pipe end plugs – force-fit pipe end plugs on pressure testing in concrete tubes, plastic tubes and steel tubes • Securing rings for pipe end plugs; DN 100 - DN 800

Type: 390

Renovation technology The series of reconstructing packers, short and longer packers as well as flexible packers, is the basis with the offered incidentals of a professional repairing system for long-term repair of defective pipe lines and canals. Reconstruction packers are used for a thorough repair of pipe lines and canals, but also for long-term maintenance of section of pipes or canal holding fixtures, for removing cracks, corrosion, sleeve offsets and pipe breaks. All reconstructing packers, also equipped with a carrying device, for repair sleeves made of glass fibre mat coated with a special artificial resin. We offer all the necessary incidentals for this. • Glass fibre mat in different roll widths and two qualities • Network hose for fixing the sleeve • Different special artificial resins • Different protective foils with protective surface for packers • Releasing agent

Reconstructing packers Reconstructing packers, short version, 1.0 bar up to 2.5 bar – with three wheel chassis, length: 960 mm - 1180 mm, max. repair length: 600 mm Type: 965 • R econstructing packer, short, 1.0 up to 2.0 bar, weight: 6.2 kg up to 20.2 kg, bypass 80 mm up to 390 mm; DN 150/200 - DN 600/700

Replacement rubber bandages for short packer • Replacement rubber bandages for short packer; DN 150/200 - DN 600/700

Type: 965

Reconstructing packers, flexible version, 1.0 bar up to 2.5 bar – length: 1080 mm - 5140 mm, max. repair length: 600 mm - 4500 mm • R econstructing packer, flexibel, 1.0 bar up to 2.5 bar, rubber length: 1.0 m - 5.0 m; DN 100/150 - DN 1000/1200

Type: 965

Replacement rubber bandages for flexible packer • R eplacement rubber bandages for flexible packer, rubber length: 1.0 m - 5.0 m; DN 150/250 - 600/800

Type: 965

Reconstructing packers, long version, 0.6 bar up to 1.5 bar – length: 1.5 m - 5.0 m • Reconstructing packer, long, 0.6 - 1.5 bar; DN 200/300 - DN 600/800

Type: 965

Sewage

Product range | Testing and sealing technology for piping constructions

House connection reconstructing packers (HA) HA Reconstructing packer, egg-shaped – length: 1.25 m - 1.55 m • HA Reconstructing packer, egg-shaped, DN 250/375 - DN 600/900

Type: 965

HA Reconstructing packer, 2.0 bar up to 3.0 bar – length: 0.6 m - 5.0 m • HA Reconstructing packer, 3.0 bar; DN 35/50 - DN 150/200

Type: 965

HA Reconstructing packer type T90° – length: 1 m • HA Reconstructing packer type T90°; DN 70 - DN 205

Type: 965

Pipe cleaning technology Pipe cleaning brush with body made of High Density Polyethylene – with towing ring on both sides and brushes made of Elaston • Pipe cleaning brush, Polyethylene body, Elaston; DN 50 - DN 600

Type: 980

Pipe scraper, Polyether foam system with coating • P ipe scraper, Polyether foam system with coating; DN 35/70 - DN 750/1100

Type: 984

Pipe cleaning balls – polished sponge rubber balls, type HM, medium porous, water resistant – for cleaning and removal of foreign bodies, absorption of residual water and to separate the different materials when operating pipelines • Pipe cleaning balls, sponge rubber, water resistant; DN 15 - DN 630

Type: 985

Personal protective equipment Gas measuring and gas alarm units Microtector II G 460 • Microtector II G 460, with sensors for four gases (CH4, O2, CO2 und H2S)

Type: 6005

GasAlertMicro5 IR Detector • G asAlertMicro5 IR Detector, with sensors for five gases (O2, CH4, H2S, CO und CO2)

Type: 6007

Self rescue system Oxy K50-S • Self rescue system Oxy K50-S

Type: 6001

Safety devices and rescue equipment Tripod with rollers

Type: 990

• Tripod with rolls s+b 2002, incl. mounting and guide pulley • Carrier bag for Tripod

Rescue lifting equipment • Rescue lifting equipment with rope and harness

Type: 990

Sewage

Product range | Testing and sealing technology for piping constructions

Fresh air mask – Place-dependent Isolation device (hose device) with accessories • Fresh air mask, complete

Type: 600

Accessories for Fresh air mask

Type: 600

• Full mask C 607 • Flexible hose with connections, 0.7 m • Carrying belt with shoulder strap • Dust filter, raw, with coupling • Coupling for dust filter • Pressure and vacuum hose with coupling, 10 m • Special plastic connection • Aluminium carrying case with foam inside

General accessories Drain mirror with frame for optical inspection

Type: 993

• Drain mirror, 285 x 150 mm - 540 x 250 mm • Replacement drain mirror, 285 x 150 mm - 540 x 250 mm • Telescopic rod, three pieces • Plastic transport box, for two drain mirrors

Handheld searchlight – protected with charging set 12/24 Volt, adjustable

Type: 998

• Handheld searchlight HSE 7 with battery • Recharging unit LS 12 for 12/24 Volt • Recharging unit 230 for 220 Volt

Portable drainage cover • Portable drainage cover

Type: 996

Magnetic quick seal • Magnetic quick seal, 53 x 53 cm up to 100 x 100 cm

Type: 996

Lifting aid for duct cover â&#x20AC;&#x201C; with universal cover lifting device â&#x20AC;˘ Lifitng aid for duct cover

Sewage

www.splusb.com

st채dtler + beck GmbH Testing and sealing technology Boschstrasse 24 D-67346 Speyer Phone: +49 62 32.31 89-0 Fax: +49 62 32.31 89-20 Internet: www.splusb.com E-Mail: info@splusb.com