QGIS Home Work 1 Convert a Google Earth Path (latitude and Longitude in degrees-WGS84 degrees ) into AutoC CAD file (Easting and Northing in meters-ETM meters )
Sec. 1
Sec. 2
Sec. 3
Sec. 4
Sec. 5
B.N. 01-05 B.N. 06-10 B.N. 11-15 B.N. 16-20 B.N. 21-25 B.N. 26-30 B.N. 31-35 B.N. 36-40 B.N. 41-45 B.N. 46-50 B.N. 01-05 B.N. 06-10 B.N. 11-15 B.N. 16-20 B.N. 21-25 B.N. 26-30 B.N. 31-35 B.N. 36-40 B.N. 41-45 B.N. 46-50 B.N. 01-05 B.N. 06-10 B.N. 11-15 B.N. 16-20 B.N. 21-25 B.N. 26-30 B.N. 31-35 B.N. 36-40 B.N. 41-45 B.N. 46-50 B.N. 01-05 B.N. 06-10 B.N. 11-15 B.N. 16-20 B.N. 21-25 B.N. 26-30 B.N. 31-35 B.N. 36-40 B.N. 41-45 B.N. 46-50 B.N. 01-05 B.N. 06-10 B.N. 11-15 B.N. 16-20 B.N. 21-25 B.N. 26-30 B.N. 31-35 B.N. 36-40 B.N. 41-45 B.N. 46-50
Group
Location (A)
Location (B)
G01 G02 G03 G04 G05 G06 G07 G08 G09 G10 G11 G12 G13 G14 G15 G16 G17 G18 G19 G20 G21 G22 G23 G24 G25 G26 G27 G28 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39 G40 G41 G42 G43 G44 G45 G46 G47 G48 G49 G50
M01 M01 M01 M01 M01 M01 M01 M01 M01 M01 M02 M02 M02 M02 M02 M02 M02 M02 M02 M03 M03 M03 M03 M03 M03 M03 M03 M04 M04 M04 M04 M04 M04 M04 M05 M05 M05 M05 M05 M05 M06 M06 M06 M06 M06 M07 M07 M07 M07 M08
M02 M03 M04 M05 M06 M07 M08 M09 M10 M11 M03 M04 M05 M06 M07 M08 M09 M10 M11 M04 M05 M06 M07 M08 M09 M10 M11 M05 M06 M07 M08 M09 M10 M11 M06 M07 M08 M09 M10 M11 M07 M08 M09 M10 M11 M08 M09 M10 M11 M09
Page 1 of 5
QGIS Home Work 1 1. Open “Google Earth” and adjust your Options to be “Degree, Minutes, Seconds”.
2. Use the previous table to know your first and second location and open o them with “Google Earth” using the *.kmz files.
Page 2 of 5
QGIS Home Work 1 3. Add a new path joining your locationss (along the existing streets) streets).
Use your group name G01, G02, G03 ………..
4. Save your path as a kmz file.
Page 3 of 5
QGIS Home Work 1 5. Open your path using QG QGIS-Desktop program (Load Load Vector icon Note: this vector layer will be opened with CRS=WGS84.
).
file 6. Right click on the path name and save it as Acad DXF file.
7. Save this layer, as an AutoCAD DXF file, with selected CRS (ETM (ETM-Red belt).
Use your group name G01, G02, G03 ……….. Page 4 of 5
QGIS Home Work 1 8. Also, save this layer, as ESRI Shape file,, with selected CRS (ETM-Red (ETM belt).
Use your group name G01, G02, G03 ………..
9. Send the previous three t products [path from Google Earth (*.km mz) & DXF file from QGIS Q (*.dxf) & Shape file from m QGIS (several files with different extensions have the same name)] to the next email:
publicworks_asu@hotmail.com
Page 5 of 5