Product Guide 2011/V1
Direct Fixing Tools and Accessories
3 - 11
• Powder Actuated Tools
3
• Drive Pins and Powerloads
4
• Gas Technology Tools
8
• Gas Pins and Fuel Cells
9
• Electrical & Plumbing Contractor Fixing Packs
11
Power Tools and Accessories
12 - 21
• 18V Cordless Range
12
• Driver Bits & Accessories Range
13
• DynaDrill™ Range
14
• Carbide
15
• Chisels
17
• Diamond
18
• Laser Range
20
• Screwdrivers and Drilldrivers
21
Mechanical Anchoring
21 - 32
• Concrete Nails
21
• Heavy Duty Anchors
22
• Medium Duty Anchors
24
• Light Duty Anchors
29
• Electrical Support Fixings
29
Reid™ Concreters and Builders Accessories Chemical Anchoring
33 - 34 35 - 37
• ChemSet™ Injection
35
• ChemSet™ Capsules
35
• ChemSet™ Studs
36
• Applicators and Accessories
37
Self Drilling Screws
38 - 41
• Chipboard
38
• Plasterboard
38
• Cabinet
39
• Metal
39
• Cement Sheet
40
Construction Chemicals
41 - 44
• Sealants
41
• Packers
42
• Adhesives
42
• FomoFill™ Expanding Foams
43
• Concrete Repair and Additives
43 - 44
• Cementitious and Epoxy Grouts
43 - 44
Pipe Support and Fire Protection Systems
45 - 48
• Fire Protection of Pipe Penetrations
45
• Allthread Rod and Accessories
46
• Channel Profiles, Supports and Accessories
47
• Pipe Clamps and Accessories
47
• AnkaScrew™ Suspension System
48
• Anchoring Packs (Heavy Duty)
48
Effective from December 31, 2010.
1300 780 063 2
www.ramset.com.au
DIRECT FIXING TOOLS AND ACCESSORIES RAMSETTM POWDER ACTUATED FIXING TOOLS
PG 0100
Item Code
Description
JOBMASTER
JobMasterTM - General Purpose Tool
1
TS750P
FrameMasterTM - Proven Framing Tool
1
TYMASTER
TM
TyMaster
Pack Qty
- Dedicated Overhead Tool
1
TM
FORMMASTER
FormMaster - High Powered Tool For Formworkers
1
ROCKET
Rocket - Automatic Short Pin Tool
1
FRAMEBOSS
TM
FrameBoss
1
- Fully Automatic Magazine Tool
PG 0160
POWDER ACTUATED TOOL ACCESSORIES Item Code
Description
Pack Qty
JobMasterTM PA28113
Piston Kit - JobMaster
1
PA28235
Buffer (x5) - JobMaster
1
PA28230
Fastener Guide Assembly - JobMaster
1
PA310000
Spall Shield - JobMaster
1
FrameMasterTM (TS750P) PA27833
Piston Kit Standard - FrameMaster (TS750P)
1
PA27432
Piston Kit High Power - FrameMaster (TS750P)
1
PA27831
Fastener Guide Assembly - FrameMaster (TS750P)
1
PA27580
Spall Shield - FrameMaster (TS750P)
1
653116
Piston Kit Standard - TyMaster
1
PAT1085
Piston Kit High Power - TyMaster
1
653021
Buffer (x3) - TyMaster
1
653106
Fastener Guide Assembly - TyMaster
1
653035
Spall Shield - TyMaster
1
PA655901
Extension Pole - TyMaster
1
PA655902
Pole Connector - TyMaster
1
PA655903
Pole Round Connector - TyMaster
1
PA28811
Piston Kit - FormMaster
1
PA312860
Buffer (x5) - FormMaster
1
PA28816
Fastener Guide Assembly - FormMaster
1
PA310000
Spall Shield - FormMaster
1
A1010
Piston Kit - Rocket
1
A1130A
Buffer Assembly (x5) - Rocket
1
A1049A
Fastener Guide Assembly - Rocket
1
TyMasterTM
FormMasterTM
Rocket
Effective from December 31, 2010.
1300 780 063 3
www.ramset.com.au
PG 0160
POWDER ACTUATED TOOL ACCESSORIES (Cont.) Item Code
Description
Pack Qty
FrameBossTM 010984
Piston
1
010982
Piston Return Spring (x2)
1
010983
Piston Insulation Ring (x2)
1
PA37040
Fastener Guide Assembly
1
PA37038
Magazine Assembly
1
PA37023
Spall Guard
1
PA11030
Insulation Fastener Adaptor Kit
1
PA1613
Safety Glasses
1
PA9333
Tool Maintenance Kit
1
PBT
Pin Breaker Tool
1
PAWS8
Safety Warning Sign
1
PA9316
Lubricating & Releasing Oil
1
Accessories
FASTENERS & ASSEMBLIES FOR CURRENT RAMSET TOOLS
PG 0103
DRIVE PINS FOR USE WITH FrameBoss™ (TS60P), FrameMaster™ (TS750P), FormMaster™ & JobMaster™ Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
LDU25
25
8
100
LDU32
32
8
100
LDU38
38
8
100
LDU42
42
8
100
LDU50
50
8
100
LDU57
57
8
100
LDU65
65
8
100
LDU75
75
8
100
LDU90
90
8
100
LDU99
100
8
100
PG 0104
COLLATED DRIVE PINS FOR USE WITH FrameBoss™ Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
C925C
25
9
500
C930C
30
9
500
C940C
40
9
300
C950C
50
9
300
C960C
60
9
300
PG 0103
TIMBER FORMWORK PINS FOR USE WITH FormMaster™ & FrameMaster™ (TS750P) Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
LDU60F
60
5
200
LDU75F
75
5
200
LDU99F
99
5
200
Effective from December 31, 2010.
1300 780 063 4
www.ramset.com.au
PG 0106
SPECIALIST PINS FOR FIXING TIMBER TO STRUCTURAL STEEL Item Code
Description
Pack Qty
SP12
Pin for fixing track to steel
100
SC925
Pin for fixing to steel
100
SC930
Pin for fixing to steel
100
SC940
Pin for fixing to steel
100
SC950
Pin for fixing 35mm timber to steel
100
SC960
Pin for fixing 45mm timber to steel
100
SC970
Pin for fixing to steel
100
SC950W
Washered Pin for fixing 35mm timber to steel
100
SC960W
Washered Pin for fixing 45mm timber to steel
100
SPECIALIST COLLATED PINS FOR FIXING TO STRUCTURAL STEEL & HARD CONCRETE USE WITH FrameBoss™ Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
SC925C
25
9
500
SC930C
30
9
500
SC940C
40
9
300
SC950C
50
9
300
SC960C
60
9
300
SACRIFICIAL FORMWORK PINS FOR USE WITH FrameBossTM, FormMaster™ & JobMaster™ Item Code
Description
SBR9
20mm Pin for Steel with 14mm Washer
PG 0106 Pack Qty 100
PG 0103
WASHERED PIN ASSEMBLIES Item Code
Shank Length (mm)
Washer Diameter (mm)
Pack Qty
LWU25
25
22
100
LWU32
32
22
100
LWU25K
25 Knurled
16
100
LWU75
75
16
100
PG 0106
ANGLE CLIP (CATINERY BRACKET) PIN ASSEMBLIES Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
LAU25
25
8
100
LAU30H
30
8
100
INSULATION FASTENERS - (FOR USE WITH InsulFastTM PA TOOL)
PG 0106
Insulation Thickness (mm)
Pack Qty
40
200
CI650
50
200
CI670
70 - 75
200
CI6100
90 - 100
100
CI960
60 - 65
100
Item Code CI640
Effective from December 31, 2010.
PG 0106
1300 780 063 5
www.ramset.com.au
PG 0106
INSULATION FASTENERS Item Code
Max. Insulation Thickness (mm)
Pack Qty
25
200
CR950P
PG 0106
HEAVY DUTY DRIVE PIN ASSEMBLY for DekMaster™ (D230) Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
22
14
1000
LHS22
PG 0103
CANE BIN ASSEMBLIES 25 mm PIN Item Code
Description
LC825
25 mm Double Clip
Pack Qty 500
PG 0180
POWDER ACTUATED ACCESSORIES - CLIPS Item Code
Description
RCA25F
Angle (Ramclip)
Pack Qty 100
PG 0180
WASHERS (DISCS) FOR USE WITH STANDARD P.A. PINS Item Code
Disc Diameter
Disc Hole Diameter (mm)
Pack Qty
RCD16F
16mm (5/8")
5
100
RCD22F
22mm
5
100
PG 0184
ELECTRICAL / PLUMBING FIXING PRODUCTS Item Code
Description
LZU30H
PA Threaded Rod Hanger - M10
Pack Qty 100
FASTENERS & ASSEMBLIES FOR PREVIOUS RAMSET TOOLS
PG 0113
DRIVE PINS FOR J20, J10 & J20S Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
HDB50
50
6
100
HDB64
64
6
100
HDB75
75
6
100
HDB95
95
6
100
PG 0104
DRIVE PINS FOR USE WITH OTHER MAGAZINE TOOLS Item Code
Shank Length (mm)
Head Diameter (mm)
Pack Qty
RHC22
22
8
100
RHC27
27
8
100
RHC52
52
8
100
RHC62
62
8
100
RHC72
72
8
100
Effective from December 31, 2010.
1300 780 063 6
www.ramset.com.au
POWERLOADS FOR RAMSET POWDER ACTUATED FIXING TOOLS STRIP POWERLOADS .27 calibre FOR USE WITH FrameBoss™, FrameMaster™ (TS750P), FormMaster™, TyMaster, Rocket, Striker, S75A, & TS750. (TS60P) Item Code
Strength
Colour
Pack Qty
PLSGR22
Weak
Green
100
PLSYW22
Medium
Yellow
100
PLSRD22
Strong
Red
100
PG 0107
SHORT SERIES POWERLOADS .22 calibre
PG 0107
FOR USE WITH JobMaster™ Item Code
Strength
Colour
Pack Qty
PLCGR22S
Weak
Green
100
PLCYW22S
Medium
Yellow
100
PLCRD22S
Strong
Red
100
PG 0107
FOR USE WITH DekMaster™ (D230) Item Code
Strength
Colour
Pack Qty
PLDYW25X
Medium
Yellow
100
PLDBU25X
Strong
Blue
100
PLDRD25X
Very Strong
Red
100
DISC POWERLOADS .25 calibre FOR USE WITH InsulFastTM Item Code
PG 0107
Strength
Colour
Pack Qty
PLDGR25
Weak
Green
100
PLDYW25
Medium
Yellow
100
DISC POWERLOADS .25 calibre
PG 0107
FOR USE WITH D200, D90 & D60 Item Code
Strength
Colour
Pack Qty
PLDGR25
Weak
Green
100
PLDYW25
Medium
Yellow
100
PLDRD25L
Strong
Red
100
POWERLOADS
PG 0107
.22 calibre FOR USE WITH J20S & J20 Item Code
Strength
Colour
Pack Qty
PLCGR22S
Weak
Green
100
PLCYW22S
Medium
Yellow
100
PLCRD22S
Strong
Red
100
PLCPU22S
Very Strong
Purple
100
Effective from December 31, 2010.
1300 780 063 7
www.ramset.com.au
PG 0120
GAS TECHNOLOGY TOOLS Item Code
Description
a
TF1100
TrakFastTM - Original Track Fixing Tool
1
b
TrakMaster
TrakMasterTM - Pulsa Technology for Track & Mesh
1
c
CableMaster
d
CableMaster
Pack Qty
TM
1
- Pulsa Tech. For Electrical & Plumbing
TM
InsulFastGT
1
InsulFast GT-Insulation Fixing Tool
a
d
c
b
PG 0182
GAS TECHNOLOGY FIXING TOOL ACCESSORIES Item Code
Description
Pack Qty
TrakFastTM B20542
Battery - TrakFast
1
TFBC
Battery Charger - TrakFast (requires power supply)
1
TMBP
Battery - TrakMaster / CableMaster / InsulFast GT
1
TMBC
Battery Charger (requires power supply)
1
337700
Fastener Guide - TrakMaster
1
333700
Magnetic Washer Adaptor - TrakMaster
1
010670
40 Pin Magazine - TrakMaster
1
TMBP
Battery - TrakMaster / CableMaster
1
TMBC
Battery Charger (requires power supply)
1
336800
Fastener Guide - CableMaster
1
CSA2025
CableMaster Saddle adapt 20/25mm
1
CSA1632
CableMaster Saddle adapt 16/32mm
1
PULSALIFT
PulsaLift Pole Tool (2.4m - 3.8m Working Height)
1
TMBP
Battery - TrakMaster / CableMaster / InsulFast GT
1
TMBC
Battery Charger (requires power supply)
1
TrakMasterTM
CableMasterTM
InsulFastTM GT
Common Accessories PA1613
Safety Glasses
1
TMBCPS
Battery Charger Power Supply
1
900507
In - Car Charger Lead
1
B20544L
Gas Tool Degreaser / Lubricant
1
Effective from December 31, 2010.
PulsaLift Pole Tool
1300 780 063 8
www.ramset.com.au
PG 0124
ACCESSORIES TO SUIT MAGNETIC WASHER ADAPTOR Item Code 011204
Shank Length (mm)
Pack Qty
25mm Washers
1000
PG 0123
TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - STANDARD DUTY Item Code
Shank Length (mm)
Pack Qty
C620
20
500
C625
25
500
C630
30
500
C635
35
500
PG 0123
TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - HEAVY DUTY FOR STEEL AND HARD CONCRETE Item Code
Description / Shank Length (mm)
Pack Qty
HC615
Heavy Duty Steel/Concrete - 15mm
500
SC620
Heavy Duty Steel/Concrete - 20mm
500
HC617
Premium Hard Concrete & Steel 17mm
500
HC622
Premium Hard Concrete & Steel 22mm
500
HC632
Premium Hard Concrete & Steel 32mm
500
PG 0125
CABLEMASTER PINS & FUEL PACKS - SPECIALIST SOFT WASHERED PINS FOR PVC FITTINGS Item Code
Description / Shank Length (mm)
CG620
Soft Washered Pins - 20mm
Pack Qty 500
PG 0123
TRAKFAST PINS & FUEL PACKS - STANDARD DUTY Item Code
Shank Length (mm)
Pack Qty
FPP012
13
1000
FPP034B
19
1000
FPP100
25
1000
FPP114
32
1000
PG 0123
TRAKFAST PINS & FUEL PACKS - HEAVY DUTY Item Code
Shank Length (mm)
Pack Qty
FPP012S
13
1000
Effective from December 31, 2010.
1300 780 063 9
www.ramset.com.au
PG 0123
TRAKFAST BREAKAWAY PINS & FUEL PACKS Item Code
Description
Pack Qty
FPP034T
19
1000
FPP100T
25
1000
FPP112T
38
1000
PG 0124
TRAKFAST FUEL PACKS Item Code
Description
TFGAS
TrakFast Fuel Cell Pack
Pack Qty 6
INSULFAST GT FASTENERS Item Code
Description
IG625
White
Suits Insulation - 25mm - 30mm
400
IG625B
Black
Suits Insulation - 25mm - 30mm
400
IG638
White
Suits Insulation - 38mm - 45mm
350
IG650
White
Suits Insulation - 50mm - 55mm
300
IG650B
Black
Suits Insulation - 50mm - 55mm
300
IG675
White
Suits Insulation - 75mm - 85mm
250
IG675B
Black
Suits Insulation - 75mm - 85mm
250
IG6100
White
Suits Insulation - 100mm - 110mm (Available Q1 2011)
200
Effective from December 31, 2010.
Pack Qty
1300 780 063 10
www.ramset.com.au
PG 0125
CABLEMASTER ELECTRICAL CONTRACTOR PACKS Item Code
Description
Pack Qty
CPGCL
Contractor Pack - Clipelec
500
CPGCLHC617
Contractor Pack - Clipelec + Hard Conc. Pins 17mm
500
CPGCLHC622
Contractor Pack - Clipelec + Hard Conc. Pins 22mm
500
CPGCH
Contractor Pack - Double Cablehorn
125
CPGCH140
Contractor Pack - Single Cablehorn
200
CPGCT
Contractor Pack - CTCLIP
500
CPGCTL
Contractor Pack - CTCLIP LARGE 40-60mm
300
CPGSH20
Contractor Pack - H/saddle 20mm
400
CPGSH25
Contractor Pack - H/saddle 25mm
400
CPGDAS20
C/Pack - Direct Align H/saddle 20mm
400
CPGDAS25
C/Pack - Direct Align H/saddle 25mm
400
CPGEC16
Contractor Pack - ECLIP16
500
CPGEC20
Contractor Pack - ECLIP20
500
CPGEC25
Contractor Pack - ECLIP25
500
CPGEC32
Contractor Pack - ECLIP32
250
CPGFP02
Contractor Pack - FP FirefixTM 7 to 8mm TM
500
CPGFP04
Contractor Pack - FP Firefix
CPGTRH
Contractor Pack - Threaded Rod Brkt.
500 400
CPGCWB
Contractor Pack - Catinary Wire Brkt.
400
8 to 9.5mm
* Contractor Packs contain electrical clips, pins, fuel cells and cable ties where applicable.
EClipTM
CableHornTM
ClipElecTM
CTClipTM
PG 0125
CABLEMASTER ELECTRICAL CLIPS Item Code
Description
CABLEHORN
Double cable bow
35
CLIPELEC
Clipelec & Cable tie
100
CTCLIP
One piece Clip w/tie
100
ECLIP20
Snap-on Conduit clip 20mm
100
ECLIP25
Snap-on Conduit clip 25mm
100
CSH20
C/master Saddle Half 20mm
100
TRH0810
Threaded Rod Hanger M8/M10
100
CWBKT
Catinary Wire Bracket Assy.
100
SPMW
Strap & Plate Mounting Washer
500
Strap and Plate Washer
Pack Qty
Saddles
Effective from December 31, 2010.
Half Saddles (Metal)
FP FireFixTM
Catenary Wire Bracket
Threaded Rod Hanger
1300 780 063 11
www.ramset.com.au
POWER TOOLS AND ACCESSORIES 18 VOLT LITHIUM-ION CORDLESS RANGE
PG 0201
Item Code
Description
a
CRH18V
18V Rotary Hammer
1
b
CHDD18V
18V Hammer Drill Driver
1
c
CDD18V
18V Drill Driver
1
d
CID18V
18V Impact Driver
1
e
CIW18V
18V Impact Wrench
1
f
CRS18V
18V Reciprocating Saw
1
g
CCS18V
18V Circular Saw
1
h
CT18V
18V Torch
1
i
CRADIO
18V Radio
1
j
CBAT18V
18V Battery
1
k
CC1828V
Charger
1
l
CKITBAG
Bag
1
18V Base Kit (2xCBAT18V,1xCC1828V,1XCT18V,1XCKITBAG)
1
m CBASEKIT18V
Pack Qty
a
b
c
f
j
Effective from December 31, 2010.
e
d
g
i
h
k
l
m
1300 780 063 12
www.ramset.com.au
PG 0580
DRIVERS BITS & ACCESSORIES Item Code
Driver Type
Pack Qty
HDPH02025
#2 PH x 25 mm
10
HDPH02050
#2 PH x 50 mm
10
HDPH02100
#2 PH x 100 mm
10
HDPH02150
#2 PH x 150 mm
10
HDPH02045DE
#2 PH Db. Ended x 45 mm
10
HDPH02065DE
#2 PH Db. x 65 mm
10
Item Code
Driver Type
Pack Qty
HDHX05032
Int. Hex Drive 5 x 32 mm
10
HDUN04065
Hex Drv. Mag 1/4" x 65 mm
10
HDUN05050
Hex Drv. Mag 5/16" x 50 mm
10
HDUN05065
Hex Drv. Mag 5/16" x 65 mm
10
HDUN06065
Hex Drv. Mag 3/8" x 65 mm
10
Item Code
Driver Type
Pack Qty
920508
8mm Socket
10
920510
10mm Socket
10
920515
15mm Socket
10
920517
17mm Socket
10
920518
18mm Socket
10
920519
19mm Socket
10
Item Code
Driver Type
Pack Qty
016707
10mm Long Socket
1
016708
13mm Long Socket
1
016709
15mm Long Socket
1
921556
SDS - 1/2" Drive Socket Adaptor
1
Item Code
Description
Pack Qty
CRS18VBMC
18V Reciprocationg Saw Blade - METAL
5
CRS18VBWC
18V Reciprocationg Saw Blade - WOOD
5
CCS18VBWC
18V Circular Saw Blade - WOOD
1
Effective from December 31, 2010.
PG 0724
PG 0201
1300 780 063 13
www.ramset.com.au
DynaDrill™ HAMMERS & DEMOLITION HAMMERS
PG 0200
Item Code
Description
Pack Qty
a
DD526
2Kg Rotary Hammer
1
b
DD527
2Kg Combi Hammer
1
c
DD532
3Kg Rotary Hammer
1
d
DD544
4Kg Combi Hammer
1
e
DD565
5Kg Combi Hammer
1
f
DD576
7Kg Combi Hammer
1
g
DD665
5Kg Demolition Hammer
1
h
DD610
10Kg Demolition Hammer
1
i
DD528A60C
24V Cordless Rotary Hammer Kit (Tool + 2x3.0Ah Batteries + Charger)
1
DD528CH
DD528 Charger
1
DD528BP30
Battery 3.0Ah
1
a
b
d
e
c
f
g
h
i
Effective from December 31, 2010.
1300 780 063 14
www.ramset.com.au
PG 0203
R3™ PLUS CARBIDE DRILL BITS Diameter
Work Length (mm) x Total length (mm)
Pack Qty
DDR306050X3
1/4"
50 x 110
1
DDR306100X3
1/4"
100 x 160
1
DDR306150X3
1/4"
150 x 210
1
DDR312125X7
1/2"
150 x 210
1
5
50 x 110
1
Item Code
DDR305050 DDR305100
5
100 x 160
1
DDR305065X5
5.5
80 x 140
1
DDR305125X5
5.5
150 x 210
1
DDR306050
6
50 x 110
1
DDR306100
6
100 x 160
1
DDR306150
6
150 x 210
1
DDR307065
7
100 x 160
1
DDR308065
8
100 x 160
1
DDR308150
8
150 x 210
1
DDR310100
10
100 x 160
1
DDR310180
10
200 x 260
1
DDR310400
10
400 x 460
1
DDR312125
12
150 x 210
1
DDR312250
12
250 x 310
1
DDR312400
12
400 x 460
1
DDR313200
13
200 x 260
1
DDR314200
14
200 x 250
1
DDR315150
15
150 x 200
1
DDR316125
16
150 x 200
1
DDR316200
16
200 x 250
1
DDR316400
16
400 x 450
1
PG 0203
U3™ PLUS CARBIDE DRILL BITS Item Code
Diameter
Work Length (mm) x Total length (mm)
Pack Qty
DDU306050X3
1/4"
50 x 110
1
DDU306100X3
1/4"
100 x 160
1
DDU306150X3
1/4"
150 x 210
1
DDU305050
5
50 x 110
1
DDU305100
5
100 x 160
1
DDU306050
6
50 x 110
1
DDU306100
6
100 x 160
1
DDU306150
6
150 x 210
1
DDU308100
8
100 x 160
1
DDU308150
8
150 x 210
1
DDU310100
10
100 x 160
1
DDU310200
10
200 x 260
1
DDU312150
12
150 x 210
1
DDU312250
12
250 x 310
1
DDU314200
14
200 x 250
1
DDU316200
16
200 x 250
1
Effective from December 31, 2010.
1300 780 063 15
www.ramset.com.au
PG 0203
R3™ PLUS CARBIDE QUATRO HEAD DRILL BITS Diameter
Work Length (mm) x Total length (mm)
Pack Qty
DQR316200
16
250 x 300
1
DQR316400
16
400 x 450
1
DQR318200
18
200 x 250
1
DQR318400
18
400 x 460
1
DQR319250
19
250 x 310
1
DQR320200
20
200 x 250
1
DQR320400
20
400 x 450
1
DQR322200
22
200 x 250
1
DQR322400
22
400 x 450
1
DQR324200
24
200 x 250
1
DQR324400
24
400 x 450
1
DQR325400
25
400 x 450
1
DQR326200
26
250 x 300
1
DQR326400
26
400 x 450
1
Diameter
Work Length (mm) x Total length (mm)
Pack Qty
DDSM12200
12
200 x 340
1
DDSM12400
12
400 x 540
1
DDSM14200
14
200 x 340
1
DDSM14400
14
400 x 450
1
DYSM16200
16
250 x 390
1
DYSM16400
16
400 x 540
1
DYSM18200
18
250 x 390
1
DYSM18400
18
400 x 540
1
DYSM19195
19
195 x 350
1
DYSM20200
20
200 x 320
1
DYSM20400
20
400 x 520
1
DYSM20800
20
800 x 920
1
DYSM22200
22
200 x 320
1
DYSM22400
22
400 x 520
1
DYSM24200
24
200 x 320
1
DYSM24400
24
400 x 520
1
DYSM25400
25
400 x 520
1
DYSM25800
25
800 x 920
1
DYSM26400
26
400 x 520
1
DYSM28450
28
450 x 570
1
DYSM30450
30
450 x 570
1
DYSM32450
32
450 x 570
1
DYSM35450
35
450 x 570
1
DYSM38450
38
450 x 570
1
DYSM40450
40
450 x 570
1
Item Code
PG 0203
R3™ MAX DRILL BITS Item Code
Effective from December 31, 2010.
1300 780 063 16
www.ramset.com.au
PG 0206
CHISELS - R3™ PLUS Item Code
Total Length (mm)
Type
Pack Qty
DHR3PCS
250
Point
1
DHR3FCS
250
20 mm Flat
1
DHR3SC040
250
40 mm Spade
1
PG 0206
CHISELS - R3™ MAX Item Code
Total Length (mm)
Type
Pack Qty
DHSMPCS
280
Point
1
DHSMPCM
400
Point
1
DHSMPCL
600
Point
1
DHSMFCS
280
25mm Flat
1
DHSMFCM
400
25mm Flat
1
DHSMFCL
600
25mm Flat
1
DHSMSC080
300
50mm Spade
1
DHSMSC115
300
115mm Spade
1
DHSMSC050
400
50mm Spade
1
PG 0203
CORE BIT & STAR CUTTER RATIO SYSTEMS Item Code
Diameter (mm)
Description
Pack Qty
DDHR12150
12
Pilot Bit
1
DCHR050
50
Core Bit
1
DCHR065
65
Core Bit
1
DCHR080
80
Core Bit
1
DCHR100
100
Core Bit
1
DAHR25280
-
Extension
1
DASMHR
-
Adapt. R3 Max
1
DAR3HR
-
Adapt. R3 Plus
1
PG 0233
SHORT RIVETING DRILLS Item Code
Drill Size
Pack Qty
DSUS04DE
1/8" Double End
10
DSNS30DE
No. 30 Double End
10
DSNS20DE
No. 20 Double End
10
DSNS11DE
No. 11 Double End
10
PG 0280
DYNADRILL™ ACCESSORIES Item Code
Description
Pack Qty.
054288
Quick Fit Keyless Chuck For 4kg Hammer
1
DAR3DH
Chuck Adaptor - R3 Plus
1
DAR3HR
Adaptor Ratio - R3 Plus
1
DASMR3
Adaptor R3 Max - R3 Plus
1
Effective from December 31, 2010.
1300 780 063 17
www.ramset.com.au
DIAMOND DRILLING
PG 0210
DIAMOND DRILLING MACHINES Item Code
Description
Pack Qty
RM160
RM160 Driling Machine
1
RM250
RM250 Drilling Machine
1
623003
RM350 Drilling Machine
1
TRIX160
Small Diamond Drilling Rig
1
TRIX350
Large Diamond Drilling Rig
1
AC1630P
30L Wet & Dry Vacuum Cleaner (Permanent Clean)
1
620900
50L Wet & Dry Vacuum Cleaner
1
PG 0213
DIAMOND DRILLING CORE BITS - WET Item Code
Length (mm)
Diameter (mm)
Pack Qty
DCDS14300
300
14
1
DCDS16300
300
16
1
DCDS18300
300
18
1
DCDS20300
300
20
1
DCDS24300
300
24
1
DCDS26300
300
26
1
DCDS32300
300
32
1
DCDS35300
300
35
1
DCDS40300
300
40
1
DCDS45300
300
45
1
DCDS52300
300
52
1
DCDL52450
450
52
1
DCDL66450
450
66
1
DCDL76450
450
76
1
DCDL82450
450
82
1
DCDL91450
450
91
1
DCDL101450
450
101
1
DCDL116450
450
116
1
DCDL121450
450
121
1
DCDL126450
450
126
1
DCDL131450
450
131
1
DCDL142450
450
142
1
DCDL151450
450
151
1
1/2" BSP Thread
1 1/4" UNC
PG 0210
DIAMOND DRY CUTTING MACHINE Item Code
Description
RW150E
Concrete Chaser
Effective from December 31, 2010.
Pack Qty 1
1300 780 063 18
www.ramset.com.au
PG 0210
DIAMOND DRILLING ACCESSORIES Item Code
Description
Pack Qty
624005
Kit-Quick connection CDBR130
1
623395
Quick Connection RM350/CDBR350
1
623327
Modular Ring Connection
1
620827
Vacuum Pump SDP101
1
624025
Vacuum Set for TRIX160 Rig
1
624026
Vacuum Set for TRIX350 Rig
1
622220
Quick Release Connector Bolts
1
172710
Portable Water Supply Unit
1
624019
Water Collector for TRIX160 Rig
1
624020
Membranes to suit TRIX160 Water Collector
5
624022
Water Collector for TRIX350 Rig
1
624023
Membranes to suit TRIX350 Water Collector
5
622200
Sharpening Plate
1
622020
Extension Rod 1/2" x 300mm
1
622070
Extension Rod 1 1/4" x 400mm
1
172770
Kit with 5 Copper Rings
1
622100
Core Bit Adaptor 1 1/4" x 1/2"
1
644004
5 metre Antistatic Hose
1
644006
Filter Kit for R1600-50 Vacuum
1
644030
Accessory Kit for R1600-50 Vacuum
1
PG 0220
INDUSTRIAL ANGLE GRINDERS Item Code
Description
Pack Qty
RG230E
Angle Grinder 230 mm
1
610980
Dust Hood for Angle Grinder 230mm - Grinding
1
610999
Dust Hood for Angle Grinder 230mm - Cutting
1
GR30FS
Anti-Lock Flanges to suit Angle Grinder 230mm
1
SG125E
Concrete Grinder 125mm
1
PG 0213
DIAMOND CUTTING BLADES Item Code
Diameter (mm) x Bore Dia. (mm)
GC102TS 610001
Description
Pack Qty
102 x 20
Turbo Super
1
125 x 22
Titan + Concrete
1
610002
150 x 22
Titan + Concrete
2
610004
230 x 22
Titan + Concrete
1
610401
115 x 22
Titan + Universal
1
610411
125 x 22
Titan + Universal
1
610120
150 x 22
Titan + Universal
2
610431
180 x 22
Titan + Universal
1
610441
230 x 22
Titan + Universal
2
610210
125 x 22
Type A Abrasive
1
610220
150 x 22
Type A Abrasive
2
610240
230 x 22
Type A Abrasive
1
610046
125 x 22
Universal Silver
1
230 x 22
Universal Silver
1
610045
Effective from December 31, 2010.
1300 780 063 19
www.ramset.com.au
PG 0213
DIAMOND CUP WHEELS Item Code
Diameter (mm)
Description
Pack Qty
610497
125
Turbo Abrs
1
610492
125
Turbo Hard
1
610477
125
Single Row Hard
1
610487
125
Single Row Abrs
1
610472
125
Double Row Hard
1
610482
125
Double Row Abrs
1
610494
125
Superturbo Hard
1
610499
125
Superturbo Abrs
1
610493
180
Turbo Hard
1
610468
180
Turbo Abrs
1
Diameter (mm) x Bore (mm)
Diameter (Imperial) x Bore (Imperial)
Pack Qty
GA230MCU7
230 x 22.2
9" x 7/8"
10
GA102SC16
102 x 16
4" x 5/8"
10
GA115SCU7
115 x 22.2
4 1/2" x 7/8"
10
GA127SCU7
127 x 22.2
5" x 7/8"
10
GA230SCU7
230 x 22.2
9" x 7/8"
10
GA356SC25
356 x 25
-
10
PG 0240
CUTOFF CENTRE WHEELS Item Code
PG 0240
DEPRESSED CENTRE WHEELS Item Code GA230SGU7
Diameter (mm) x Width (mm) x Bore (mm)
Diameter (Imperial) x Width (Imperial) x Bore (Imperial)
Pack Qty
230x6x22.2
9"x1/4"x7/8"
10
PG 0230
LASER LEVELLING TOOLS Item Code
Description
a
RL300
Rotating Laser
1
b
RLML
Multi-Liner Laser
1
c
RL5W
Multi-Point Laser
1
d
RLCL
Cross Line Laser
1
e
RLM50
Distance Meter
1
RLTP
Tripod
1
RST5
Laser Measuring Staff 5M
1
RFSP
Laser Floor to Ceiling Pillar
1
RWCM
Laser Wall / Ceiling Mount
1
a
Effective from December 31, 2010.
Pack Qty
b
c
d
e
1300 780 063 20
www.ramset.com.au
PG 0220
RAMSET™ SCREWDRIVERS & DRILLDRIVERS Item Code
Description
Pack Qty
CSD14A20C
14V Cordless Drill Driver Kit
1
DD514A24C
14V Cordless Hammer Drill Driver Kit
1
CIW280
18V Cordless Impact Wrench
1
BP1420
14V 2.0 Ah Battery
1
BP1424
14V 2.4 Ah Battery
1
UBC7224
Charger (60 min.)
1
CIW280BP
18V 2.6Ah Battery
1
CIW280CH
18V Charger
1
RCG600
13.2V Cordless Caulking Gun
1
MECHANICAL ANCHORING CONCRETE NAILS
PG 0333 Size (mm)
Length (mm)
Pack Qty
CW415
2.4
15
100
CW415Q500
2.4
15
500
CW420
2.4
20
100
CW420Q500
2.4
20
500
CD425
2.4
25
100
CW425
2.4
25
100
CW425Q500
2.4
25
500
CD430
2.4
30
100
CW430
2.4
30
100
CW430Q500
2.4
30
500
CD440
2.4
40
100
CW440
2.4
40
100
CD525
3.2
25
100
CK540
3.2
38
100
CD540
3.2
40
100
CF650
3.8
50
100
CF660
3.8
60
100
CF675
3.8
75
100
CK750
3.6
50
100
CK760
4.0
63
100
CK775
4.2
75
100
Item Code
Effective from December 31, 2010.
1300 780 063 21
www.ramset.com.au
MECHANICAL ANCHORING HEAVY DUTY ANCHORS SpaTec™ Plus SAFETY ANCHORS
PG 0306
Anchor Size (mm)
Anchor Length (mm) x Thread Size (mm)
Pack Qty
l SP10105
15
105 x M10
25
l SP10105F
15
105 x M10
25
u SP10110SS*
15
110 x M10
25
l SP12105
18
105 x M12
25
l SP12120
18
120 x M12
25
Item Code
l SP12120F
18
120 x M12
25
u SP12120SS*
18
120 x M12
25
l SP16145
24
145 x M16
10
u SP16145ESS#* l SP20170
24
145 x M16
10
28
170 x M20
5
#
Hex nut assembly
* Available to order. Lead times apply.
Boa™ Coil ANCHORS - COMPLETE
PG 0306 Anchor Length (mm)
Pack Qty
1/2"/13 mm
75
50
1/2"/13 mm
100
25
5/8"/16 mm
90
25
5/8"/16 mm
125
25
3/4"/19 mm
115
20
Item Code
Anchor Size
l BAC08075 l BAC08100 l BAC10090 l BAC10125 l BAC12115
Boa™ Coil ANCHORS - COIL ONLY Item Code
PG 0306
Anchor Size
Pack Qty
l BAC08
1/2"/13 mm
100
l BAC10
5/8"/16 mm
50
l BAC12
3/4"/19 mm
50
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
u Stainless Steel 316
1300 780 063 22
www.ramset.com.au
TruBolt™ ANCHORS
lPG 0303 / nPG 0320 / u PG 0318 Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l T06055
6
55 x M6
100
u T06055SS
6
55 x M6
100
l T06085
6
85 x M6
100
u T06085SS
6
85 x M6
100
l T06120
6
120 x M6
50
l T06150
6
150 x M6
100
l T06180
6
180 x M6
100
l T08065
8
65 x M8
50
u T08065SS
8
65 x M8
100
l T08090
8
90 x M8
50
Item Code
l T08090GH
8
90 x M8
50
u T08090SS
8
90 x M8
50
l T10075
10
75 x M10
50
u T10075SS
10
75 x M10
50
l T10090
10
90 x M10
50
n T10090GH
10
90 x M10
50
u T10090SS
10
90 x M10
50
l T10120
10
120 x M10
20
l T12080
10
80 x M12
20
n T12080GH
12
80 x M12
20
u T12080SS
12
80 x M12
20
l T12100
12
100 x M12
20
n T12100GH
12
100 x M12
20
u T12100SS
12
100 x M12
20
l T12120
12
120 x M12
20
l T12140
12
140 x M12
20
n T12140GH
12
140 x M12
20
u T12140SS
12
140 x M12
20
l T12180
12
180 x M12
20
n T12180GH
12
180 x M12
20
l T16100
16
100 x M16
20
n T16100GH
16
100 x M16
20
u T16100SS
16
100 x M16
20
l T16125
16
125 x M16
20
n T16125GH
16
125 x M16
20
u T16125SS
16
125 x M16
20
l T16150
16
150 x M16
20
n T16150GH
16
150 x M16
20
u T16150SS
16
150 x M16
20
l T16175
16
175 x M16
20
n T16175GH
16
175 x M16
20
u T16175SS
16
175 x M16
20
l T20120
20
120 x M20
10
n T20120GH
20
120 x M20
10
u T20120SS
20
120 x M20
10
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
n Hot Dipped Galvanised u Stainless Steel 316
1300 780 063 23
www.ramset.com.au
TruBolt™ ANCHORS (Cont.)
lPG 0303 / nPG 0320 / u PG 0318
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l T20160
20
160 x M20
10
Item Code
n T20160GH
20
160 x M20
10
u T20160SS
20
160 x M20
10
l T20215
20
215 x M20
10
n T20215GH
20
215 x M20
10
MEDIUM DUTY ANCHORS TRUFAST PUSH-PULL ANCHORS Item Code
PG 0303
Anchor Size (mm)
Anchor Length (mm)
Pack Qty
l TFE06
6
55
100
l TFE06120
6
120
100
AnkaScrew™ ANCHORS
PG 0340
Anchor Size (mm) x Anchor Length (mm)
Head Type
Pack Qty
l AS05030H
5 x 30
Hex Flange
100
Item Code
l AS06050H
6 x 50
Hex Flange
100
p AS06050HGH
6 x 50
Hex Flange
100
l AS06075H
6 x 75
Hex Flange
100
p AS06075HGH
6 x 75
Hex Flange
100
l AS06100H
6 x 100
Hex Flange
100
p AS06100HGH
6 x 100
Hex Flange
100
l AS08060H
8 x 60
Hex Head
100
p AS08060HGH
8 x 60
Hex Head
100
l AS08075H
8 x 75
Hex Head
100
p AS08075HGH
8 x 75
Hex Head
100
l AS08100H
8 x 100
Hex Head
100
p AS08100HGH
8 x 100
Hex Head
100
l AS10060H
10 x 60
Hex Head
50
p AS10060HGH
10 x 60
Hex Head
50
l AS10075H
10 x 75
Hex Head
50
p AS10075HGH
10 x 75
Hex Head
50
l AS10100H
10 x 100
Hex Head
50
p AS10100HGH
10 x 100
Hex Head
50
l AS12075H
12 x 75
Hex Head
50
p AS12075HGH
12 x 75
Hex Head
50
l AS12100H
12 x 100
Hex Head
50
p AS12100HGH
12 x 100
Hex Head
50
l AS12150H
12 x 150
Hex Head
20
p AS12150HGH
12 x 150
Hex Head
20
Item Code
Description
l RAP02
Pack Qty
Services Pack(500 x AS05030H+5/16"mag nutsetter)
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
PG 0724
500
n Hot Dipped Galvanised
p Mechanically Galvanised u Stainless Steel 316
1300 780 063 24
www.ramset.com.au
DynaBolt™ ANCHORS HEX BOLT
lPG 0300 / uPG 0318
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l DP08045H
8
45 x M6
100
u DP08045HSS
8
45 x M6
100
l DP08070H
8
70 x M6
50
u DP08070HSS
8
70 x M6
50
Item Code
l DP10045H
10
45 x M8
50
u DP10045HSS
10
45 x M8
50
l DP10055H
10
55 x M8
50
u DP10060HSS
10
60 x M8
50
l DP10080H
10
80 x M8
50
u DP10080HSS
10
80 x M8
50
l DP10105H
10
105 x M8
25
u DP10105HSS
10
105 x M8
25
l DP12065H
12
65 x M10
25
l DP12075H
12
75 x M10
25
u DP12075HSS
12
75 x M10
25
l DP12105H
12
110 x M10
20
l DP16110H
16
110 x M12
10
DynaBolt™ ANCHORS HEX NUT
lPG 0300/ nPG 0320/ uPG 0318
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l D6026
6
26 x M4.5
100
l DP06040
6
38 x M4.5
100
u DP06040SS
6
38 x M4.5
100
Item Code
l DP06060
6
57 x M4.5
100
u DP06060SS
6
57 x M4.5
100
l DP08040
8
40 x M6
100
u DP08040SS
8
40 x M6
100
l DP08065
8
66 x M6
50
u DP08065SS
8
66 x M6
50
l DP08090
8
92 x M6
50
l DP10040
10
41 x M8
50
n DP10040GH
10
41x M8
50
l DP10050
10
49 x M8
50
n DP10050GH
10
49 x M8
50
u DP10050SS
10
49 x M8
50
l DP10075
10
76 x M8
50
n DP10075GH
10
76 x M8
50
u DP10075SS
10
76 x M8
50
l DP10100
10
103 x M8
25
n DP10100GH
10
103 x M8
25
u DP10100SS
10
103 x M8
25
l DP10125
10
124 x M8
25
l DP12060
12
55 x M10
25
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
n Hot Dipped Galvanised u Stainless Steel 316
1300 780 063 25
www.ramset.com.au
DynaBolt™ ANCHORS HEX NUT (Cont.)
lPG 0300/ nPG 0320/ uPG 0318
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
n DP12060GH
12
55 x M10
25
u DP12060SS
12
55 x M10
25
l DP12070
12
70 x M10
25
n DP12070GH
12
70 x M10
25
u DP12070SS
12
70 x M10
25
l DP12100
12
98 x M10
20
Item Code
n DP12100GH
12
98 x M10
20
u DP12100SS
12
98 x M10
20
l DP12125
12
126 x M10
20
n DP12125GH
12
126 x M10
20
u DP12125SS
12
126 x M10
20
l DP16065
16
62 x M12
20
n DP16065GH
16
62 x M12
20
l DP16110
16
106 x M12
10
n DP16110GH
16
106 x M12
10
l DP16140
16
140 x M12
10
n DP16140GH
16
140 x M12
10
l DP20080
20
81 x M16
10
n DP20080GH
20
81 x M16
10
l DP20115
20
113 x M16
5
n DP20115GH
20
113 x M16
5
l DP20160
20
157 x M16
5
DynaBolt™ ANCHORS DECORATIVE HEADS Round Head
PG 0300 Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l D6032R
6
32 x M4.5
100
l DP06055R
6
55 x M4.5
100
Item Code
Flat Head
lPG 0300/ uPG 0318 Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l D6034F
6
34 x M4.5
100
Item Code
l DP06060F
6
60 x M4.5
100
u DP06060FSS
6
60 x M4.5
100
l DP06075F
6
75 x M4.5
100
u DP06075FSS
6
75 x M4.5
100
l DP06100F
6
100 x M4.5
100
l DP08060F
8
60 x M6
100
l DP08085F
8
85 x M6
50
l DP10075F
10
75 x M8
50
l DP10100F
10
100 x M8
50
l DP10125F
10
125 x M8
25
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
n Hot Dipped Galvanised u Stainless Steel 316
1300 780 063 26
www.ramset.com.au
DynaBolt™ SPECIALS Item Code
PG 0300 Anchor Size (mm)
Bolt Style
Pack Qty
l D06026S
6
Set Lok
500
l D06038S
6
Set Lok
100
l D08042E
8
Tie Wire Dynabolt
100
l D08045K
6
Hook Bolt
100
l D08045X
6
Eyebolt
100
DynaBolt™ DECORATIVE POST HEADS Item Code
l PG 0380/ uPG0318
Anchor Size (mm)
Head Style
Pack Qty
u DR045SS
6
Round
100
l DR06
8
Round
100
u DR06SS
8
Round
100
u DF045SS
6
Flat
100
l RFM06
8
Flat
100
u DF06SS
8
Flat
100
l REM06
8
Tie Wire
100
l RFM08
10
Flat
100
u DF08SS
10
Flat
100
l REM08
10
Tie Wire
100
l REM10
12
Tie Wire
50
DynaSet™ DROP-IN ANCHORS
l PG 0312/ uPG 0318
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l DSF06
8
25 x M6
100
l DSM06
8
25 x M6
100
u DSM06SS
8
25 x M6
100
l DSM08
10
30 x M8
100
u DSM08SS
10
30 x M8
50
l DSF10
12
30 x M10
50
l DSM10
12
40 x M10
50
u DSM10SS
12
40 x M10
50
l DSF12
16
50 x M12
50
Item Code
l DSM12
16
50 x M12
50
u DSM12SS
15
50 x M12
50
l DSM16
20
65 x M16
25
u DSM16SS
20
60 x M16
25
l DSM20
25
80 x M20
25
l Carbon Steel Zinc Plated u Stainless Steel 316
Effective from December 31, 2010.
1300 780 063 27
www.ramset.com.au
DynaSet™ DROP-IN ANCHORS
PG 0724
Item Code
Description
Pack Qty
RAP06
Elect.Mech. Services Pk (500 x DSF06 + set tool)
500
RAP01
Elect. Mech. Services Pk(500 x DSF10 + set tool)
500
RAP12
Elect. Mech. Services Pk (200 x DSF12 + set tool)
200
DynaSet™ SETTING TOOLS
PG 0380 To Suit Dynaset
Pack Qty
SETDS1
DSM06/DSF06/DSM06SS
1
SETDS2
DSM08/DSM08SS
1
SETDF3
DSF10
1
SETDS3
DSM10/DSM10SS
1
SETDS4
DSM12/DSF12/DSM12SS
1
SETDS5
DSM16/DSM16SS
1
SETDS6
DSM20
1
Item Code
DynaSet™ SAFETY RING ANCHORS Note: Request Ramset™ Tech Data Sheet for installation instructions.
pPG320/ uPG 0319
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
u RSR12SS
16
138 x M12
4
p RSR12GM
16
138 x M12
4
Item Code
SETSA4
Setting Tool
Item Code
Description
Anchor Length (mm) x Thread Size
Pack Qty
Dynaset
50 x M12
50
u DSM12SS
1
Loxin™ SHIELD ANCHORS
PG 0312
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l RLM08
16
52 x M8
25
l RLM10
16
52 x M10
25
l RLM12
22
65 x M12
25
l RLM16
26
75 x M16
25
Item Code
l Carbon Steel Zinc Plated u Stainless Steel 316 p Mechanically Galvanised
Effective from December 31, 2010.
1300 780 063 28
www.ramset.com.au
LIGHT DUTY ANCHORS RediDriveTM
PG0314 Anchor Size (mm)
Anchor Length (mm)
Pack Qty
p RD05030
5
30
100
p RD05040
5
40
100
p RD05050
5
50
100
p RD05065
5
65
100
p RD05075
5
75
100
Item Code
ShureDriveTM ANCHORS
lPG 0315/ uPG 0318
Anchor Size (mm)
Anchor Length (mm)
Pack Qty
l SDM05022
5
22
100
l SDM06030
6
30
100
u SDM06030SS
6
30
100
l SDM06050
6
50
100
Capacity (mm)
Type
Pack Qty
Cable bundles
Cable Holder + Anchor
50
Cat wire
Cat Wire Eye
100
DK10
8 – 10
Dynaclip
100
Cable Holder
DK20
16 - 20
Dynaclip
100
PG 0724
Item Code
ELECTRICAL SUPPORT FIXINGS Item Code CHLD CWE05040
DK32
25 - 32
Dynaclip
100
VF1
1.6 - 2.5
Vertical Flange Clip
100
Flange clip for chain
100
HF01
DynaClip PG 0718
Vertical Flange Clip CatWire Eye
RamPlugsTM - STANDARD
PG 0330
Anchor Size (mm)
Anchor Length (mm)
Pack Qty
DNP05
5
25
100
DNP06
6
30
100
DNP07
7
30
100
DNP08
8
40
100
DNP10
10
50
50
DNP12
12
60
25
Item Code
RamPlugsTM - LONG
PG 0330 Anchor Size (mm)
Anchor Length (mm)
Pack Qty
DLP08
8
80
100
DLP10
10
80
50
Item Code
l Carbon Steel Zinc Plated u Stainless Steel 316 p Mechanically Galvanised
Effective from December 31, 2010.
1300 780 063 29
www.ramset.com.au
RamPlugsTM - ULTRA LONG
PG 0330
Anchor Size (mm)
Anchor Length (mm)
Pack Qty
l DUP10080F
10
80
25
l DUP10080H
10
80
25
l DUP10100F
10
100
25
l DUP10100H
10
100
25
l DUP10135F
10
135
25
l DUP10135H
10
135
25
l DUP10160F
10
160
25
l DUP10160H
10
160
25
Item Code
InsulFastTM DRILL ANCHORS
PG 0331
Anchor Size (mm)
Insulation Thickness (mm)
Pack Qty
CB5060
8
50 to 60
200
CB7080
8
70 to 80
200
CB90100
8
90 to 100
200
ASRCA38C
6
up to 65mm
200
Item Code
HOLLOW WALL ANCHOR
PG 0500
Item Code
Thread Size
Wall Thickness (mm)
Pack Qty
HW05M4
M4
Up to 5
100
HW10M4
M4
6 – 10
100
HW10M4P
M4
6 – 10
100
HW13M4
M4
8 – 13
100
HW24M4
M4
16 - 24
100
HW38M4
M4
34 - 38
100
HW14M5
M5
7 – 14
100
HW16M6
M6
6 – 16
100
HOLLOW WALL ANCHOR SETTING TOOL Item Code
Description
SETHWG
Hand Setting Tool - Gun
PG580 Pack Qty 1
ToggleMate™ and WallMate™
PG 0500
Screw Gauge x Min. Screw Length (mm)
Wall Thickness (mm)
Pack Qty
8 x 20
10 – 13
50
WMZ
8 x 20
10 – 12
100
WM25
6 - 8 x 20
10 – 12
100
Item Code TM16
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
1300 780 063 30
www.ramset.com.au
RamToggle™ Item Code
PG 0500 Hole Size (mm)
Wall Thickness (mm)
Pack Qty
RT10
8
5 – 10
100
RT12
8
8 – 12
100
RT16
8
12 – 18
100
SPRING TOGGLE
PG 0500 Screw Gauge x Screw Length (mm)
Pack Qty
STR04050
1/8" x 50
100
STR05050
3/16" x 50
100
STF05050
3/16" x 50
100
STR05075
3/16" x 75
50
STF05075
3/16" x 75
50
STR05100
3/16" x 100
50
Item Code
HOOK TOGGLE
PG 0500
Item Code
Screw Gauge x Screw Length (mm)
Pack Qty
STK05050
3/16" x 50
50
WALL GRABB'RTM Item Code GP16
PG 0500 Screw Length (mm) x Gauge
Wall Thickness (mm)
Pack Qty
30 x 8
16
100
NYLON ANCHORS Item Code
lPG 0503/ uPG 0318 Anchor Size (mm) x Anchor Length (mm)
Head Type
Pack Qty
l TNM325
5 x 25
Mushroom
100
u TNM325SS
5 x 25
Mushroom
100
l TNR325
5 x 25
Round
100
u TNR325SS
5 x 25
Round
100
l TNL325
5 x 25
Flat
100
l TNR338
5 x 38
Round
100
l TNF425
6.5 x 25
Countersunk
100
l TNM425
6.5 x 25
Mushroom
100
u TNM425SS
6.5 x 25
Mushroom
100
l TNR425
6.5 x 25
Round
100
l TNF438
6.5 x 38
Countersunk
100
l TNM438
6.5 x 38
Mushroom
100
l TNR438
6.5 x 38
Round
100
l TNF450
6.5 x 50
Countersunk
100
l TNM450
6.5 x 50
Mushroom
100
l TNR450
6.5 x 50
Round
100
l TNF475
6.5 x 75
Countersunk
50
l TNM475
6.5 x 75
Mushroom
50
l Carbon Steel Zinc Plated u Stainless Steel 316
Effective from December 31, 2010.
1300 780 063 31
www.ramset.com.au
EasyDriveTM ANCHORS Item Code
lPG 0503/ uPG 0318
Anchor Size (mm)
Anchor Length (mm)
Pack Qty
l ED05033
5
33
100
u ED05033SS
5
33
100
l ED05050
5
50
100
l ED06042
6
42
100
u ED06042SS
6
42
100
l ED06055
6
55
100
u ED06055SS
6
55
100
l ED06075
6
75
100
u ED06075SS
6
75
100
l ED08080
8
80
50
l ED08120
8
120
50
PLASTIC SPAGHETTI
PG 0515 Drill Size (mm)
Pack Qty Metres
RSP
5
50
463609
5
5
Item Code
PLASTIC PLUGS (FRAME PACKS)
PG 0506
Item Code
Length (mm) x Drill Size (mm)
Colour
Pack Qty
WPWH25
25 x 5
White
1000
WPRD25
25 x 6
Red
1000
WPRD32
32 x 6
Red
1000
WPRD38
38 x 6
Red
1000
WPRD50
50 x 6
Red
1000
WPGR25
25 x 7
Green
1000
WPGR32
32 x 7
Green
1000
WPGR38
38 x 7
Green
500
WPGR50
50 x 7
Green
500
WPBU38
38 x 8
Blue
500
WPBU50
50 x 8
Blue
500
ROLL PLUGS Item Code
PG 0506 Length (m) x Drill Size (mm)
Colour
Roll Qty
720115
100 x 6
Red
1
720122
100 x 7
Green
1
720139
100 x 8
Blue
1
l Carbon Steel Zinc Plated u Stainless Steel 316
Effective from December 31, 2010.
1300 780 063 32
www.ramset.com.au
CONCRETERS AND BUILDERS ACCESSORIES Products on pgs 33 & 34 also distributed by Reid TM
FERRULES - STILETTO ROUND BAR Thread Size x Thread Length (mm)
Ferrule Length (mm)
Pack Qty
l FS16070
M16 x 32
70
50
n FS16070GH
M16 x 32
70
50
l FS16095
M16 x 39
95
50
n FS16095GH
M16 x 39
95
50
l FS20070 n FS20070GH
M20 x 32
70
50
M20 x 32
70
50
l FS20095
M20 x 39
95
50
n FS20095GH
M20 x 39
95
50
Thread Size x Thread Length (mm)
Ferrule Length (mm)
Pack Qty
l FE10045
M10 x 20
45
250
l FE12055
M12 x 25
55
200
n FE12055GH
M12 x 25
55
200
l FE12095
M12 x 25
95
100
n FE12095GH
M12 x 25
95
100
l FE16070
M16 x 32
70
100
n FE16070GH
M16 x 32
70
100
l FE16095
M16 x 32
95
75
n FE16095GH
M16 x 32
95
75
l FE20070
M20 x 32
70
75
n FE20070GH
M20 x 32
70
75
l FE20095
M20 x 38
95
50
n FE20095GH
M20 x 38
95
50
l FE24095
M24 x 50
95
40
n FE24095GH
M24 x 50
95
40
Thread Size x Thread Length (mm)
Ferrule Length (mm)
Pack Qty
u FE10045SS u FE12055SS
M10 x 20
45
250
M12 x 25
55
200
u FE16070SS u FE20095SS
M16 x 32
70
100
M20 x 45
95
50
Item Code
FERRULES - ELEPHANT FEET Item Code
FERRULES - STAINLESS STEEL Item Code
RAMSETTM STORAGE Item Code
Description
Pack Qty
RFB
RamsetTM Fastener Box
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
1
n Hot Dipped Galvanised u Stainless Steel 316
1300 780 063 33
www.ramset.com.au
FERRULE ACCESSORIES Item Code
Description
FM12N
Nailing Plate - RED
FM16N FM20N
Thread Size
Pack Qty
M12
100
Nailing Plate - GREEN
M16
100
Nailing Plate - BLUE
M20
100
FM24N
Nailing Plate - YELLOW
M24
100
FWSC125
Support Chair - 125mm
50
FWSC150
Support Chair - 150mm
50
FWSC175
Support Chair - 175mm
50
FWSC200
Support Chair - 200mm
50
FSC25
Stiletto Ferrule Chair - 25mm
50
FSC50
Stiletto Ferrule Chair - 50mm
50
FSC75
Stiletto Ferrule Chair - 75mm
50
FSC100
Stiletto Ferrule Chair -100mm
50
SWIFTSHIM Item Code
Thickness
Pack Qty
SHIM01
1mm
100
SHIM02
2mm
200
SHIM03
3mm
100
SHIM05
5mm
100
SHIM10
10mm
40
SHIM15
15mm
40
SHIM20
20mm
30
ACCESSORIES Item Code
Description
BBLSL20
Bondbreaker LS
20Litre
BBLSL205
Bondbreaker LS
200Litre
RPPS01
Hand Spraying Unit
RBH
Rambar Leverage Tool
1
DSR16
Dowelsert to suit 16 diam Round Bar
25
DSR20
Dowelsert to suit 20 diam Round Bar
RPF
Panel Fillet (12mm x 12mm) - 3 metre length
75m
RFF
Form Fillet (17mm x 17mm) - 3 metre length
75m
RPFJ
Panel False Joint (40mm x 12mm) - 3 metre length
30m
RFFJ
Form False Joint (40mm x 12mm) - 3 metre length
30m
PFC
Fillet Shear
Effective from December 31, 2010.
Pack Qty
1
25
1
1300 780 063 34
www.ramset.com.au
CHEMICAL ANCHORING ChemSet™ 101 General Purpose Polyester Anchoring Adhesive
PG 0403
Item Code
Description
Pack Qty
ISKP
Standard ChemSet™ 101 Kit*
10
C101J
ChemSet™ 101 Jumbo (750ml) + Mixer Nozzle
12
C101C
ChemSet™ 101 Cartridge (380ml) + Mixer Nozzle
20
ISNP
Mixer Nozzle for ChemSet™ 101
5
* Kit consists of 2 x 380 ml cartridges + 4 x mixer nozzles
ChemSet™ 801 Heavy Duty Epoxy Anchoring Adhesive
PG 0403
Item Code
Description
Pack Qty
C801C
ChemSet™ 801 Cartridge (380ml) + Mixer Nozzle
24
C801J
ChemSet™ 801 Jumbo (750ml) + Mixer Nozzle
12
ISNE
Mixer Nozzle for ChemSet™801
5
ChemSet™ Reo502™ Extra Heavy Duty Epoxy Anchoring Adhesive
PG 0404
Item Code
Description
Pack Qty
REO502J
ChemSet™ Reo502™ (750ml) + Mixer Nozzle
12
ISNE
Mixer nozzles for Reo502™
5
ISNET
Mixer nozzles for Reo502™ Fast Dispensing
5
ChemSet™ Maxima™ Anchoring Capsules Item Code
PG 0400
Anchor Size (mm)
Pack Qty
CHEM08
M8
10
CHEM10
M10
10
CHEM12
M12
10
CHEM16
M16
10
M20 & M24
6
CHEM2024
ChemSet™ Nylon Sleeves for Hollow Masonry Anchoring with ChemSet™ 101 Item Code
Sleeve Length (mm) x Drill Size (mm)
PG 0440
To Suit Stud
Pack Qty
ISS08
64 x 12
M8
100
ISS10
64 x 14
M10
100
ISS12
64 x 16
M12
100
ChemSet™ Metal Mesh Sieves for Hollow Masonry Anchoring with ChemSet™ 101 Item Code
Sleeve Length (mm) x Drill Size (mm)
PG 0440
To Suit Stud
Pack Qty
ISM10
1000 x 12
M6/M8
1
ISM12
1000 x 16
M10/M12
1
ISM16
1000 x 22
M16
1
Effective from December 31, 2010.
1300 780 063 35
www.ramset.com.au
ChemSet™ Retaining Collars for Overhead Anchoring with ChemSet™ 101 Item Code
PG 0440
Anchor Size (mm)
To Suit Anchor
Pack Qty
ISR10
10
CS10130
100
ISR12
12
CS12160
100
ISR16
16
CS16190
100
REMEDIAL BRICK WALL TIES (for use with ChemSet™ 101) Item Code RA225
PG 0440
Material
Anchor Length (mm)
Pack Qty
Nylon
220
100
ChemSet™ ANCHOR STUDS
l PG 0406/ n PG 0320/ u PG 0318
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l CS08110
8
110 x M8
10
Item Code
n CS08110GH
8
110 x M8
10
u CS08110SS
8
110 x M8
10
l CS10130
10
130 x M10
10
n CS10130GH
10
130 x M10
10
u CS10130SS
10
130 x M10
10
l CS12160
12
160 x M12
10
n CS12160GH
12
160 x M12
10
u CS12160SS
12
160 x M12
10
l CS12180
12
180 x M12
10
l CS16190
16
190 x M16
10
n CS16190GH
16
190 x M16
10
u CS16190SS
16
190 x M16
10
l CS20260
20
260 x M20
6
n CS20260GH
20
260 x M20
6
u CS20260SS
20
260 x M20
6
l CS24300
24
300 x M24
6
n CS24300GH
24
300 x M24
6
u CS24300SS
24
300 x M24
6
Threaded Inserts - Internally Threaded Anchors Item Code
PG0404
Anchor Size (mm)
Anchor Length (mm) x Thread Size
Pack Qty
l 062770
8
60 x M8
10
u 062860
8
60 x M8
10
l 062480
10
65 x M10
10
u 062960
10
65 x M10
10
l 062760
12
75 x M12
10
u 063100
12
75 x M12
10
l 062800
16
125 x M16
10
u 051175
16
125 x M16
10
l 062810
20
170 x M20
10
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
n Hot Dipped Galvanised u Stainless Steel 316
1300 780 063 36
www.ramset.com.au
ChemSet™ SYSTEMS APPLICATORS
PG 0403
Item Code
Description
Pack Qty
CUA
Chemset™ Universal Applicator*
1
CUAPN
Pneumatic Universal Applicator*
1
C380A
Chemset™ Applicator 380ml**
1
*For dispensing ChemSet™ 101, ChemSet™ 801 and ChemSet™ Reo 502™ Cartridges **For dispensing ChemSet™ 101 380 ml Cartridge (C101C)
ChemSet™ HOLE CLEANING ACCESSORIES Item Code
PG 0440
Anchor Size (mm)
Description
Pack Qty
HCBT13
8 – 12
Brush
1
HCBT20
16 - 20
Brush
1
HCBT26
20 - 24
Brush
1
HCP
-
Dust Blower
1
HCPHV
-
High Volume Dust Blower
1
For cleaning dust from holes in concrete ChemSet™ Anchoring Kit Item Code CHEMKITBAG
Description
Pack Qty
Tool bag, CUA, HCPHV,HCBT13,HCBT20,HCBT26
Effective from December 31, 2010.
1
1300 780 063 37
www.ramset.com.au
RAMSET™ SCREWS CHIPBOARD SCREWS - COUNTERSUNK SELF EMBEDDING HEAD COARSE THREAD
PG 1050
Item Code
Gauge
Screw Length (mm)
Order Qty
l RSC08025YSF l RSC08028YSF
8
25
1000
8
28
1000
l RSC08035YSF l RSC08041YSF
8
35
1000
8
41
1000
l RSC08045YSF l RSC08051YSF
8
45
1000
8
51
1000
PLASTERBOARD SCREWS - BUGLE HEAD NEEDLE POINT TWINFAST THREAD
PG 1040
Item Code
Gauge
Screw Length (mm)
Order Qty
l RSN06025YBT l RSN06030YBT
6
25
1000
6
30
1000
l RSN06041YBT l RSN08065YBT
6
41
1000
8
65
1000
PLASTERBOARD SCREWS - BUGLE HEAD DRILL POINT TWINFAST THREAD
PG 1044
Item Code
Gauge - Pitch
Screw Length (mm)
Order Qty
l RSD06025YBB l RSD06030YBB
6 – 20
25
1000
6 – 20
30
1000
l RSD06045YBB
6 – 20
45
1000
PLASTERBOARD SCREWS - COLLATED NEEDLE POINT TWINFAST THREAD Gauge
Screw Length (mm)
Order Qty
l RSN06025YBTC l RSN06032YBTC
6
25
1000
6
32
1000
l RSN06041YBTC
6
41
1000
Item Code
PLASTERBOARD SCREWS - COLLATED DRILL POINT TWINFAST THREAD Gauge
Screw Length (mm)
Order Qty
l RSD06025YBTC l RSD06032YBTC
6
25
1000
6
32
1000
l RSD06041YBTC
6
41
1000
Item Code
l Carbon Steel Zinc Plated
Effective from December 31, 2010.
1300 780 063 38
www.ramset.com.au
PLASTERBOARD SCREWS - BUGLE HEAD NEEDLE POINT COARSE THREAD
PG 1042
Item Code
Gauge
Screw Length (mm)
Order Qty
l RSN07025YBF l RSN07030YBF
7
25
1000
7
30
1000
l RSN10038YBF
10
38
1000
PG 1005
CABINET SCREWS - LARGE WAFER (TRUSS HEAD) NEEDLE POINT TWINFAST THREAD Item Code
Gauge - Pitch
Screw Length (mm)
Order Qty
l RSN08012YLT l RSN08016YLT
8 – 15
12
1000
8 – 15
16
1000
l RSN08025YLT l RSN08032YLT
8 – 15
25
1000
8 – 15
32
1000
METAL SCREWS - HEX WASHER SERIES 5 EXTENDED DRILL POINT
PG 1010
Item Code
Gauge - Pitch
Screw Length (mm)
v RQ512032MHC v RQ512050MHC
12 – 24
32
1000
12 – 24
50
1000
Order Qty
METAL SCREWS - LARGE WAFER (TRUSS) HEAD DRILL POINT
PG 1003
Item Code
Gauge - Pitch
Screw Length (mm)
Order Qty
l RSD08012YLB l RSD08016YLB
8 – 18
12
1000
8 – 18
16
1000
METAL SCREWS - WAFER HEAD DRILL POINT
PG 1003
Item Code
Gauge - Pitch
Screw Length (mm)
Order Qty
l RSD08012YWB l RSD10016YWB
8 – 18
12
1000
10 – 16
16
1000
l Carbon Steel Zinc Plated v XP3TM AS3566 Class 3
Effective from December 31, 2010.
1300 780 063 39
www.ramset.com.au
METAL SCREWS - FLAT HEAD DRILL AND NEEDLE POINT
PG 1003
Item Code
Gauge - Pitch
Screw Length (mm)
Order Qty
l RSDSHZY1016 l RNPSHZY1016
10 – 16
16
1000
10 – 16
16
1000
CEMENT SHEET SCREWS - COUNTERSUNK SELF EMBEDDING HEAD NEEDLE POINT TWINFAST THREAD Item Code
Gauge
Screw Length (mm)
Order Qty
l RSN08020YST
8
20
1000
CEMENT SHEET SCREWS - COUNTERSUNK SELF EMBEDDING WINGED DRILL POINT Item Code
PG 1007
lPG 1002 / vPG 1013
Gauge - Pitch
Screw Length (mm)
Order Qty
l RSD06050YSBW
6 – 20
50
1000
v RSD08022MSBW v RSD08032MSBW
8 – 18
22
1000
8 – 18
32
1000
v RSD08040MSBW l RSD10045YSBW
8 – 18
40
1000
10 – 16
45
1000
l Carbon Steel Zinc Plated v XP3TM AS3566 Class 3
Effective from December 31, 2010.
1300 780 063 40
www.ramset.com.au
CONSTRUCTION CHEMICALS
SEALANTS Item Code
Colour
Pack Size
Carton Qty
ROOF SEAL NEUTRAL CURE ROOFING & PLUMBING SILICONE
PG 0800
RFSLTRG300
Translucent
300 ml
20
RFSLALG300
Aluminium
300 ml
20
RFSLGYG410
Grey
300 ml
20
WATER SEAL ACETIC CURE SANITARY SILICONE
PG 0800
WRSLWHG300
White
300 ml
20
WRSLTRG300
Translucent
300 ml
20
HiSeal™ POLYURETHANE CONSTRUCTION SEALANT
PG 0800
HYSLGYG375
Grey
300 ml
25
HYSLGYG720
Grey
600 ml
20
DynaSeal™ URETHANE ACRYLIC CONSTRUCTION SEALANT
PG 0800
DYSLGRG450
Grey
300 ml
20
DYSLGYG900
Grey
600 ml
15
BlazeBrake™ 201 ACRYLIC FIRE RATED SEALANT
PG 0800
BLBRGYC
Grey
300 ml
20
BLBRGYS
Grey
600 ml
15
FyreBrake™ POLYURETHANE FIRE RATED SEALANT FYBRGYS
Grey
PG 0800 600ml
12
300 ml
20
300 ml
20
DuctSeal™ ACRYLIC SEALANT FOR DUCTWORK DSLWG450
Grey
PG 0800
GAP SEAL PAINTABLE GAP SEALANT GPSLWHG450
White
Effective from December 31, 2010.
PG 0800
1300 780 063 41
www.ramset.com.au
BARREL GUN, CAULKING GUNS AND ACCESSORIES FOR SEALANTS
PG 0880
Item Code
Description
Carton Qty
CAGU850
Caulking Gun for 850ml / 900 ml Cart.
1
CAGU300
Caulking Gun for 300ml Cart.
1
SABGU37
37cm Barrel Gun for sealant sausages
1
BGUNS
Nozzle Set Assorted for SABGU37 (Pack of 5)
1
BGUNOZ
Nozzle Set Natural for SABGU37 (Pack of 10)
1
POLYETHYLENE CLOSED CELL FOAM BACKER ROD Item Code
Colour
PG 0824 Diameter (mm)
Length (m)
BRPE06
White
6
250
BRPE10
White
10
250
BRPE13
White
13
50
BRPE15
White
15
50
BRPE20
White
20
50
BRPE25
White
25
2
BRPE30
White
30
2
BRPE40
White
40
2
BRPE50
White
50
2
HORSE SHOE SHIMS
PG 0824
Item Code
Colour
Product Size (mm)
Carton Qty Bag
SHIM01575
Brown
75 x 37 x 1.5 (52 x 13)
1000
SHIM0375
Green
75 x 37 x 3 (52 x 13)
1000
SHIM0575
Yellow
75 x 37 x 5 (52x13)
1000
SHIM06575
White
75 x 37 x 6.5 (52x13)
500
SHIM1075
Black
75 x 37 x 10 (52x13)
500
SHIM01590
Brown
90 x 37 x 1.5 (66 x 13)
1000
SHIM0390
Green
90 x 37 x 3 (66 x 13)
1000
SHIM0590
Yellow
90 x 37 x 5 (66 x 13)
1000
SHIM1090
Black
90 x 37 x 10 (66 x 13)
500
ADHESIVES NailFree™ Construction Adhesive
PG 0821
Item Code
Description
Pack Size
Carton Qty
NFCAG320
300 ml Cartridge
300 ml
10
NFCAG930
900 ml Cartridge
900 ml
10
Effective from December 31, 2010.
1300 780 063 42
www.ramset.com.au
SAFE-T-BOND™ Water Clean Up Construction Adhesive Item Code STBDL1
PG 0821
Description
Pack Size
Carton Qty
1 L Sachet
1 Litre
10
Ramset™ Fomofill™ Self-Expanding Gap Filling Foam
PG 0803
Item Code
Description
Pack Size
Carton Qty
FMFLG500
Fomofill™
500 ml
12
FMFLG750
Fomofill™
750 ml
12
FomoPlus™ Applicator Foam
PG 0803
Item Code
Description
Carton Qty
FMPLG750
Fomoplus™ 750 ml Canister
12
FMPLGU
Fomoplus™ Applicator Gun
1
FMPLGU300
Fomoplus™ Applicator Gun Metal
1
Fomo™ Aerosol Solvent Cleaner for FomoPlus™ Applicators Item Code
Description
Pack Size
Carton Qty
FMSVM500
Fomo™ Solvent
500 ml
12
Colour
Pack Size
Carton Qty
CONCRETE REPAIR Item Code
Epoxy Putty - Epoxy Repair Compound for Concrete
PG 0815
EPPYL1
Grey
1 litre
1
EPPYL2
Grey
2 litre
1
EPPYL4
Grey
4 litre
1
EPPYL20
Grey
20 litre
1
1 litre
1
Epoxy Patch - Pourable Epoxy Resin for Concrete Repair
PG 0815
EPPHL1
Amber
EPPHL3
Amber
3 litre
1
EPPHL20
Amber
20 litre
1
2 litre
1
Epoxy Grout - Epoxy Grouting Compound
PG 0815
EPGRL2
Grey
EPGRL4
Grey
4 litre
1
EPGRL16
Grey
16 litre
1
Effective from December 31, 2010.
1300 780 063 43
www.ramset.com.au
CEMENTITIOUS GROUTS
PG 0812
Item Code
Description
RPGMP
Premier Grout MP
Pack Size
Qty
20kg
1
830104
Ultrafix™ Concremate™
10kg
1
830111
Ultrafix™ Concremate™
25kg
1
Fine Grade Filler for Epoxy Patch and Epoxy Grout Item Code
Description
RFLFG
Fine Grade Fillers
PG 0812 Pack Size
Qty
20kg
1
Mixing Paddles for Grouts and Epoxies
PG 0880
Item Code
Description
Qty
SSMP
Small Spiral Mixing Paddle
1
LSMP
Large Spiral Mixing Paddle
1
CONCRETE ADDITIVES Item Code
Description
Pack Size
Qty
CemCrete™ Bonding and Sealing Agent
PG 0809
CMCRL5
Cemcrete™
5 litre
1
CMCRL20
Cemcrete™
20 litre
1
20 litre
1
Concrebond™ Acrylic Bonding and Sealing Agent CNBDL20
Concrebond™
Effective from December 31, 2010.
PG 0809
1300 780 063 44
www.ramset.com.au
FIRE PROTECTION AND SUSPENSION SYSTEMS FIRE PROTECTION OF PIPE PENETRATIONS RAMSETTM FIRE COLLARS CAST IN STACKWORK (TALLS) Item Code
Pipe Type
PG0724 Diameter Size (mm)
Carton Qty
RFCH65S
PVC/HDPE PPR
PVC 40/50/65. HDPE 75. PPR32/40/50/65/75
30
RFCH100S
PVC/HDPE PP/PPR
PVC 80/90/100. HDPE 100. PP100. PPR 90/110
18
RFCH150S
PVC/PE
PVC 150. PE 150.
4
RAMSETTM FIRE COLLARS CAST IN STACKWORK (SHORT) Item Code
Pipe Type
Diameter Size (mm)
Carton Qty
RFCL40S
PVC / PPR
PVC 40. PPR32/40
90
RFCL50S
PVC / PPR
PVC 50. PPR50
90
RFCL65S
PVC / PPR
PVC 65. PPR63
90
RFCL80S
PVC / PPR
PVC 80. PPR75
50
RFCL90S
PVC / PPR
PVC 90. PPR90
50
RFCL100S
PVC/HDPE/PP/PPR
PVC 100. HDPE100. PP100. PPR110
50
RAMSETTM FIRE COLLARS RETROFIT STACKWORK (LOW PROFILE) Item Code
Pipe Type
Diameter Size (mm)
Carton Qty
RFC100R
PVC/HDPE
PVC 80/90/100. HDPE 100. PPR 100 (WALL). PE 100 (WALL)
8
RFC65R
PVC
PVC 40/50/65. PVC 50 (WALL)
24
Consult technical data for tested applications and fire ratings before comencing use. Go to www.ramset.com.au.
FIRE COLLARS CAST IN STACKWORK (TALLS) Item Code
Pipe Type
PG0724 Diameter Size (mm)
Carton Qty
SNAPH50S
PVC
40/50
60
SNAPH100S
PVC/HDPE
65/80/90/100
18
SNAPH150S
PVC/HDPE/PPR/PE
150
1
PG0724 FIRE COLLARS CAST IN -FLOOR WASTE (TALLS) Item Code SNAPH50FWS
Pipe Type
Diameter Size (mm)
Carton Qty
PVC/HDPE/ PPR/PE
40/50
60
Consult technical data for tested applications and fire ratings before comencing use. Go to www.ramset.com.au.
Effective from December 31, 2010.
1300 780 063 45
www.ramset.com.au
FIRE COLLARS CAST IN -FLOOR WASTE (SHORT)
PG0724
Pipe Type
Diameter Size (mm)
Carton Qty
SNAPL80FWS
PVC/HDPE/ PPR/PE
80
24
SNAPL100FWS
PVC/HDPE/ PPR/PE
100
24
Item Code
FIRE COLLARS RETROFIT (STEEL) LOW PROFILE
PG0724
FLOORWASTE AND STACKWORK Item Code SNAPLP100R FSC50B
Pipe Type
Diameter Size (mm)
Carton Qty
PVC
65/80/90/100
2
PVC/HDPE
40/50
1
FIRE RATED EXPANDING PU FOAM Item Code FRF700
PG0724
Size
Description
Carton Qty
750 ml
BlazeBrake™ FR Foam
12
Consult technical data for tested applications and fire ratings before comencing use. Go to www.ramset.com.au.
ALLTHREAD ROD AND ACCESSORIES ALLTHREAD ROD
PG 0721
Item Code
Thread Size
Thread Length (mm)
Pack Qty
RTRM10L3
M10
3000
10
RTRM12L3
M12
3000
10
NUTS / WASHERS Item Code
PG 0724 Thread Size
Description
Pack Qty
M10
HEX NUT ZP
200
HNM12
M12
HEX NUT ZP
200
RWM10
Suit M10 (25mm OD)
Round Washer ZP
200
RWM12
Suit M12 (28mm OD)
Round Washer ZP
200
Thread Size
Thread Length (mm)
Pack Qty
M10
30
50
HNM10
COUPLINGS Item Code RTCM10
PG 0721
Effective from December 31, 2010.
1300 780 063 46
www.ramset.com.au
CHANNEL PROFILES, SUPPORTS AND ACCESSORIES COMBINATION CLIP (Channel and individual mount) Item Code
PG0724
Description
Diameter Size (mm)
Carton Qty
363015
Combination Clip
15-16
100
363020
Combination Clip
20-25
100
363028
Combination Clip
28-32
50
363035
Combination Clip
35-42
50
363050
Combination Clip
50
50
CHANNEL PERFORATED (GALV) Item Code
Description
333030RA
Channel perf (27/18mm)
PG0724 Length
Pack Qty
2 Metres
12
RAPID CHANNEL RAIL BOLT Item Code
Description
334930
Rail Bolt (27/18mm)
PG0724 Thread Size x Length M10 x 30mm
Carton Qty 100
RAPID ISOPHONIC CLAMP M8/M10 (Standard Duty) Item Code
Description
114020
PG0724 Diameter Size (mm)
Carton Qty
Rapid Isophonic M8/M10
20-22
50
114025
Rapid Isophonic M8/M10
25-27
50
114033
Rapid Isophonic M8/M10
33-35
50
114036
Rapid Isophonic M8/M10
36-38
25
114042
Rapid Isophonic M8/M10
42-44
25
114052
Rapid Isophonic M8/M10
52-54
25
114060
Rapid Isophonic M8/M10
57-60
25
114075
Rapid Isophonic M8/M10
74-80
25
114090
Rapid Isophonic M8/M10
83-91
25
114110
Rapid Isophonic M8/M10
108-114
25
ISOPHONIC CLAMP M8/M10 (Heavy Duty)
PG0724
Item Code
Description
115054
Isophonic M8/M10
53-56
25
115070
Isophonic M8/M10
68-72
25
115083
Isophonic M8/M10
81-86
25
115100
Isophonic M8/M10
99-105
25
115110
Isophonic M8/M10
107-112
25
115160
Isophonic M8/M10
159-166
25
Effective from December 31, 2010.
Diameter Size (mm)
Carton Qty
1300 780 063 47
www.ramset.com.au
SURFACE MOUNT PLATES Item Code
Description
335122
Welded Nut Plate
PG0724 Size (mm)
Carton Qty
M8/M10
100
HEAVY DUTY ANCHORING (Channel & Individual Mount) PACKS
PG0724 Pack Qty
Item Code
Description
RAP01
Elect.l Mech. Services Pk (500 x DSF10 + set tool)
500
RAP02
Serv. Pk (500 x AS05030H + 5/16" mag nutsetter)
500
RAP12
Elect.l Mech. Services Pk (200 x DSF12 + set tool)
200
AnkaScrewTM SUSPENSION SYSTEM
PG0724
Item Code
Description
AS06035R
AnkaScrewTM ROD 6 x 35mm M10
AS06035RM12
AnkaScrewTM ROD 6 x 35mm M12
50
AS06035S
AnkaScrewTM STUD 6 x 35mm M8
100
016708
Hex Impact Socket (long) 13mm for AS06035R
1
016707
Hex Impact Socket (long) 10mm for AS06035S
1
016709
Hex Impact Socket (long) 15mm for AS06035RM12
1
921556
SDS 1/2" Drive Socket Adaptor for DD528
1
Effective from December 31, 2010.
Carton Qty 50
1300 780 063 48
www.ramset.com.au
TERMS & CONDITIONS OF SALE 1. DEFINITION In these Terms and Conditions of Sales: “Supplier” means Ramset Fasteners Australia and Reid Construction Systems, divisions of ITW Ramset Australia Pty Ltd ABN 48 004 297 009; “Customers” means any person who has placed an Order with the Supplier or request a Quotation from the Supplier; “Goods” means any goods and/or services requested by the Customer in an order “Terms” means these terms and conditions 2. SALE PRICES Prices of Goods shall be the then current price charged by the Supplier as at the date of delivery of the Good. Prices are subject to change without notice. 3. GST The Customer must pay to the Supplier any amount, which the Supplier is required to pay on account of any GST as a consequence of any supply made or deemed to be made in connection with this agreement. The GST amount must be calculated at the prevailing rate of GST imposed by the government. 4. SMALL ORDER SURCHAGE A minimum “Small Order Surcharge” may apply unless otherwise advised in writing. 5. DELIVERY CHARGE All deliveries will incur a minimum delivery charge of $10. 6. AVAILABILITY OF STOCK Deliveries at any time are subject to availability of stock, and the Supplier will not be liable for any charges due to product unavailability. No responsibility will be accepted for delays outside the supplier’s control. 7. CREDIT TERMS Invoices must be paid in full no later then 30 days after the last day of the month in which the invoice was issued. Accounts exceeding their limit will be suspended until the account is paid in full. All cash sales transactions must be paid in full before stock is supplied to customer. 7.1 WARRANTY INFORMATION Please refer to Ramset standard warranty procedures for clarification on warranty and fair wear and tear. 8. COLLECTION AND LEGAL FEES If the Customers breaches these Terms, the Customer must pay any collection, commission and/or legal fees charged by any party to recover any money due. 9. RETURN OF GOODS a) Goods will not normally be accepted for return after (14) days from date of delivery. b) Acceptance of Goods returned does not imply agreement to issue a credit note. c) A credit note will only be issued if the returned Goods are in original packs and found to be satisfactory by the Supplier in saleable condition. Delivery charge and small order surcharge will not be credited. d) Freight on returns will be at the Customer’s expense. e) Customers will be subject up to a 20% handling and restocking charge, except in the case of Supplier error, or defective goods. 10. RESERVATION OF TITLE The Supplier whilst parting with possession of the Goods shall retain title to those Goods and title shall only pass to the Customer when full payment in cleared fund is received by the Supplier. Until this happens: a) the relationship between the Supplier and Customer is a fiduciary one b) the Customer holds the Goods as bailee for the Supplier c) the Customer shall not assign its rights, title or interest in any book debts arising in its favour in respect of its sale of Goods The customer is however obligated to pay the proceeds of sale into a separate account pending payment to the Supplier. Until payment in full the Customer is obliged to store the Goods separately pending sale and must keep separate records of sales of Goods owned by the Supplier. In default of payment, title is to remain with the Supplier who shall have the right to repossess the Goods without notice to the Customer and for this purpose the parties agree that the Supplier may enter the property of the Customer and recover the Goods. The right to enter is without prejudice to any other rights of the Supplier deriving from these Terms of the general law. In the event that the Customer uses the Goods in some manufacturing or construction purposes of its own or some third party, then the Customer shall hold such part of the proceeds of such manufacturing or construction process as relates to the Goods in trust for the Supplier. Such part shall be deemed to equal in dollar terms the amount owing by the Customer to the Supplier at the time of the receipt of such proceeds. 11. LIABILITY OF THE SUPPLIER (a) The Supplier will not be liable in respect of any loss or damages (including consequential loss or damage), howsoever caused (whether by negligence or otherwise), which may be suffered or incurred or which may arise directly or indirectly in respect of the Goods, howsoever acquired where any person has: (i) modified or in any way altered the Goods or changed the formulation or make-up of the Goods; (ii) failed to use the Goods in accordance with the instructions or recommendations of the Supplier published from time to time in connection with the use of the Goods; (iii) failed to use the Goods in accordance with any applicable laws or regulations. (b) The Supplier will not be under any liability in respect of any loss or damage (Including consequential loss or damage) however caused (whether by negligence or other wise) which may be suffered or incurred or which may arise directly or indirectly in respect of any technical advice or assistance given or rendered by it to the Customer whether or not in connection with the manufacture, preparation or supply of Goods and/or Services to the Customer, provided that the Supplier has provided such technical advise or assistance with due care and skill. c) Where any applicable legislation implies any term, condition or warranty into the relationship between the Supplier and the Customer or into these Terms and Conditions of Sale or a contract of sale between the Supplier and the Customer in relation to the sale or supply of Goods/Services, or otherwise gives the Customer a particular remedy the Supplier and that legislation or any legislation avoids or prohibits provisions excluding or modifying the application of, or exercise of, or liability under, such term, condition, warranty or remedy, then that term, condition, warranty or remedy shall be deemed to be included in these Terms and Conditions of Sale, or, as the case may be, apply to that relationship. However, the Supplier’s liability for any breach of such term, condition or warranty or under such remedy, shall be limited, at the Supplier’s option, in any one or more of the ways permitted by that legislation including, where so permitted: (i) if the breach relates to any Goods, to: (A) the replacement of those Goods or the supply of equivalent goods; (B) the repair of those Goods; (C) the payment of the cost of replacing those Goods or acquiring equivalent goods; or (D) the payment of the cost of having those Goods repaired; and (ii) if the breach relates to any Services to: (A) the supply of those Service again; or (B) the payment of the cost of hiving those Service supplied again (d) If there is any inconsistency between the express terms of these Conditions and any term, condition, warranty or remedy deemed to be included in these Conditions pursuant to sub-clause 9(c), that term, condition, warranty or remedy shall prevail to the extent of the inconsistency, (e) The description, illustrations and other material contained in the catalogue, price list, brochure, leaflet or other material provided by or on behalf of the Supplier shall not form part of these Conditions or any contract between the Supplier and the Customer for the supply of Goods or Services and shall not amount to any representation or warranty (whether collateral thereto or otherwise), nor shall the use of such material constitute a contract of sale by description. All Goods and Services supplied by the Supplier shall be in conformity with the Supplier’s standard commercial specifications at the time of supply, subject to the Supplier’s right without notice to incorporate such minor modifications thereto as it thinks fit or any modifications of whatever nature necessary to comply with any relevant law. 12. PROPERTY AND RISK Risk in Goods shall pass to the Customer immediately upon delivery of the Goods by the Supplier. 13. ACKNOWLEDGEMENTS The Customers acknowledges that: (a) it has not relied on any representations made by the Supplier as to the suitability of the Goods for any specific purpose; and (b) it is its responsibility to make its own enquiries and investigations as to the suitability of the Goods for any particular purpose. 14. GOVERNING LAW These Conditions shall be governed by and construed in accordance with the laws in force in the State of Victoria, and the Supplier and the Customer submit to the jurisdiction of the courts of that State.
Effective from December 31, 2010.
49
1300 780 063 www.ramset.com.au
HEAD OFFICE 296-298 Maroondah Highway Mooroolbark, Victoria 3138 Tel: 03 9726 6222
STATE BRANCHES VICTORIA 5/71 Victoria Crescent, Abbotsford 3067 296-298 Maroondah Highway, Mooroolbark 3138 SOUTH AUSTRALIA 115 Sir Donald Bradman Drive, Hilton 5033
New South Wales QUEENSLAND 71 Carnarvon Street, Silverwater 2128 281 Montague Road, West End 4101 563 Gardeners Road, Mascot 2020 153 Ingham Road, Townsville 4810 3/8 Channel Road, Mayfield West 2034 ACT 5/19 Tennant Street, Fyshwick 2609
WESTERN AUSTRALIA 1/12 Colin Jamieson Drive, Welshpool 6106
For terms and conditions go to www.ramset.com.au ITW Construction Systems Australia Pty. Ltd. ABN 48 004 297 009 trading as Ramset™ ™Trademarks of Cetram Pty. Ltd. used under licence by Ramset™ FP FireFixTM is a trademark of Perelli Cables Clipsal® is a registered trademark of Clipsal Australia Pty. Ltd. © Copyright 2011 ram/pg12/2010
Sales, Orders and Enquiries Tel:
Fax: Email: Web:
1300 780 063 1300 780 064
enquiry@ramset.com.au www.ramset.com.au