Product Guide/ Line Card Products to Improve, Repair, Protect and Beautify Concrete
Our Knowledge is Concrete
SM
One of the Broadest Offerings of Products to Improve, Repair, Protect and Beautify Concrete
If you only thought ChemMasters made concrete cures and seals...read on! Our extensive offering of job-proven products includes: • repair mortars • grouts • bridge and wall coatings • concrete coatings and toppings • concrete release and bonding agents • special purpose products, and yes, • a complete line of cures, cure & seals and sealers for concrete Many of our products are our own innovations, available only from ChemMasters.
If you love our cures and seals, isn’t it time you tried more?
Water-Based Cures
Water-Based Curing & Sealing Compounds
Safe-Cure® ClearDR Clear dissipating resin cure. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class B
Safe-Seal™ Low solvent, odorless acrylic curing and sealing compound. Specifications: ASTM C309, Type 1, Class A & B
EZ Strip Cure™ Clear curing compound which can be easily removed prior to application of subsequent floor coatings and treatments. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B
Safe-Cure® & Seal EPX Two-component epoxy curing compound, sealer and primer. Available in clear or pigmented formulations. Specifications: ASTM C309, Type 1 or 2 (pigmented), Class A & B; NCHRP 244 Series II & IV; ASTM C1315, Type I or II (pigmented), Class B; USDA when cured
EZ Strip CureDR Clear dissipating resin cure for interior & exterior applications. Requires no UV exposure. Easily removed with light mechanical or hand abrasion, or low pressure water. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B
Safe-Cure® & Seal 309 Clear, economical styrenated acrylic cure and seal. Less than 100 g/L VOC’s. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; VOC Compliant in SCAQMD; USDA when cured
Safe-Cure® 600 White pigmented wax emulsion curing compound. Safe-Cure® 800 White pigmented wax emulsion highway curing compound. Specifications: ASTM C309, Type 2, Class A; DOT approved in many states Safe-Cure® 1000 White pigmented wax emulsion highway curing compound. Specifications: ASTM C309, Type 2, Class A; DOT approved in many states; CRD C300 version available upon request Safe-Cure® 1000 Clear Clear wax emulsion curing compound. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A Safe-Cure 1000V White pigmented wax emulsion highway curing compound. Specifications: ASTM C309, Type 2, Class A; DOT approved in the state of Virginia ®
Safe-Cure® 1200 White pigmented wax emulsion highway curing compound. Specifications: ASTM C309, Type 2, Class A; DOT approved in many states; CRD C300 version available upon request Safe-Cure® 1200 Clear Clear wax emulsion curing compound. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A Safe-Cure® 2000 White pigmented resin highway curing compound. Specifications: ASTM C309, Type 2, Class B; FAA; CRD C300 version available upon request Safe-Cure® 3500 White pigmented highway curing compound. Specifications: ASTM C309, Type 2; MTO approved in Ontario, CA Safe-Cure® 4000 White pigmented Poly Alpha-Methstyrene (PAMS) resin highway curing compound. Specifications: ASTM C309, Type 2, Class A & B Silencure™ DOT White pigmented wax emulsion highway curing compound with penetrating silane sealer. Specifications: ASTM C309, Type 2, Class A; NCHRP 244, Series II and Series IV; ASTM C672
Polyseal™ WB Clear, high performance pure acrylic that cures, seals, hardens and dustproofs. Less than 100 g/L VOC’s. Specifications: ASTM C309, Type 1, (Type 1D or 2 upon request), Class A & B; ASTM C1315, Type I, (Type ID or II upon request), Class A; VOC Compliant in SCAQMD; USDA when cured Silencure™ SRT Pure acrylic, non-yellowing cure & seal containing penetrating silane for long-term protection from freeze/thaw cycles and de-icing chemicals. Suitable for use on broom finished or hard steel troweled concrete. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; NCHRP 244, Series II & Series IV
Water-Based Sealers Chemisil™ Clear, sodium silicate hardener and dustproofer for concrete. Specifications: USDA when cured Chemisil™ Plus Chemically reactive solution of potassium-silicate with added siliconate to harden, densify and increase the service life of concrete. Specifications: ASTM C672; ASTM C642; ASTM E96; Fed. Spec. SSW 110C; USDA when cured Chemisil™ Plus Li Chemically reactive solution of lithium-silicate with added siliconate to harden, densify and increase the service life of concrete. Resists white salt adhesion. Specifications: ASTM C672; ASTM C642; ASTM E96; Fed. Spec. SSW 110C; USDA when cured Chemisil Plus OR Chemically reactive, oil resistant treatment for concrete. Specifications: USDA when cured Safe-Thane™ Single component, high gloss, clear polyurethane coating for wood, concrete and masonry. Spall Guard™ WB 7% / 10% / 50% Penetrating, chemically reactive oligomerous siloxane to waterproof concrete and masonry. Specifications: NCHRP 244, Series II & Series IV; ASTM C672 Sure-Lock™ WB Joint stabilizing sealer for interlocking pavers and stones to prevent joint sand erosion and enhance stone and paver color. DuraShield™ SRT High gloss, chemically resistant, abrasion resistant, odorless, catalyzed sealer for concrete. Specifications: USDA when cured ®
2
Cosmetic Restoration
Solvent-Based Curing & Sealing Compounds
Gloss Restorer™ XL Chemically reacts with dull, weathered sealer to restore high gloss, luster and shine. More breathable than traditional sealers. Reduces buildup that may cause coatings to blush, whiten, blister or peel. Paver Enhancer™ Penetrating water-based treatment for many types of architectural pavers to deepen and enhance color development. Minimizes formation of efflorescence and maximizes breathability in a matte finish that resists staining.
Spray-Cure™ & Seal 25 Low viscosity styrene modified acrylic cure & seal. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; ASTM C1315, Type I, Class B; USDA when cured Polyseal™ High performance pure acrylic curing, sealing, hardening and dustproofing compound. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; ASTM C1315, Type I, Class A; USDA when cured Polyseal™ Plus 30% solids, high performance pure acrylic curing, sealing, hardening and dustproofing compound. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; ASTM C1315, Type I, Class A; USDA when cured Crystal Clear Super high gloss, high solids, siliconized acrylic curing & sealing compound. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; ASTM C1315, Type I, Class A; USDA when cured Silencure™ Pure acrylic, non-yellowing cure & seal containing penetrating silane for long-term protection from freeze/thaw cycles and de-icing chemicals. For use on broom finished concrete. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; NCHRP 244, Series II & Series IV
Solvent-Based Sealers Traz™ 25 High gloss methacrylate sealer. Improved chemical resistance. Specifications: USDA when cured Anti-Spall 55 Boiled linseed oil anti-spalling compound for commercial and highway concrete. Specifications: ASTM D235; ASTM D260; AASHTO M126 & M128; Fed. Spec. TTL 190C & TTT 291C Aquanil™ Plus 40 Penetrating, chemically reactive silane treatment to waterproof concrete and masonry. Specifications: NCHRP 244, Series II & Series IV; ASTM C672 Aquanil™ Plus 40 CI Penetrating, chemically reactive silane treatment with added Migrating Corrosion Inhibitor (CI) to waterproof concrete and masonry while protecting underlying rebar and structural steel. Specifications: NCHRP 244, Series II & Series IV; ASTM C672 MMA Wet Look Sealer Super high gloss methyl methacrylate sealer for decorative concrete. Specifications: USDA when cured
Low-VOC (<400 g/L) Solvent-Based Sealers Aquanil ™ Plus 40 repels moisture and water from horizontal or vertical concrete and masonry, protecting from freeze/ thaw cycles, salt and deicing chemicals.
3
Aquanil™ Plus 40A / Aquanil™ Plus 100 Penetrating, chemically reactive silane treatment to waterproof concrete and masonry. 40% and 100% solids version are both low-VOC (<250 g/L) formulations. Specifications: NCHRP 244, Series II & Series IV; ASTM C672 Aquanil™ Plus 40-A CI / Aquanil™ Plus 100 CI Penetrating, chemically reactive silane treatment with added Migrating Corrosion Inhibitor (CI) to waterproof concrete and masonry while protecting underlying rebar and structural steel. 40% and 100% solids versions are both low-VOC (<250 g/L) formulations. Specifications: NCHRP 244, Series II & Series IV; ASTM C672 Traz™ 25 A High gloss methacrylate sealer. Improved chemical resistance. Specifications: USDA when cured Stamped & Decorative Concrete Sealer 400A High gloss, anti-bubbling, slow evaporating sealer for stamped and decorative concrete. 200% to 300% more working time than traditional low-VOC formulations.
Low-VOC (<350 g/L) Solvent-Based Curing & Sealing Compounds Spray-Cure™ & Seal 25 A Low-VOC (<350 g/L), low viscosity styrene modified acrylic with added UV absorbers, non-yellowing cure & seal. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; ASTM C1315, Type I, Class A; USDA when cured Polyseal™ A / Polyseal™ Plus A (30% solids) Low-VOC (<350 g/L), high performance pure acrylic curing, sealing, hardening and dustproofing compound. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; ASTM C1315, Type I, Class A; USDA when cured Polyseal™ A Satin Finish Low-VOC (<350 g/L), bubble resistant, high performance pure acrylic, curing, sealing, hardening and dustproofing compound in a satin/matte finish. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; USDA when cured Polyseal™ EZ / Polyseal™ EZ Honey Brown Low-VOC (<350 g/L), bubble resistant, high performance pure acrylic, curing, sealing, hardening and dustproofing compound. Honey Brown pigment added upon request. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; USDA when cured Crystal Clear A Low-VOC (<350 g/L), super high gloss, siliconized acrylic curing and sealing compound. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; ASTM C1315, Type I, Class A; USDA when cured Silencure™ A Low-VOC (<350 g/L), pure acrylic, non-yellowing cure & seal for lasting protection from freeze/thaw cycles and de-icing chemicals. For use on broom finished concrete. Specifications: ASTM C309, Type 1 (Type 1D upon request), Class A & B; NCHRP 244, Series II & Series IV Polyseal™ EZ Shield Low-VOC (<350 g/L) decorative acrylic cure & seal with added silane shield. Specifications: ASTM C309, Type 1 (Type 1D available upon request), Class A & B; USDA when cured MMA Wet Look Sealer A Super high gloss methyl methacrylate sealer for decorative concrete. Specifications: USDA when cured
Cure & Seal And Sealer Additives
Concrete Restoration Products
Polyseal™ Tint Concentrated opaque pigment for acrylic cure & seals and sealers. Available in 12 standard colors, and both water-based and solvent-based formulations.
SpeedPatch™ Fast setting, gypsum free patching compound for repair of concrete, masonry, pipe or precast. Shavable after initial set. SpeedPatch™ XL Fast setting, gypsum free patching compound with superior freeze/thaw durability. Shavable after initial set. FeatherPatch™ One component, fast setting, high strength, polymer modified patching material for horizontal repairs up to 1 inch depth. ChemMix™ Concrete mix and patching product designed to provide all the performance, workability and cosmetics of ready mix concrete. ChemSpeed™ 65 Rapid setting, high strength, polymer modified highway or industrial horizontal patching material. Can be extended with up to 50% pea gravel for deep patching. Specifications: ASTM C928, R3 ChemSpeed™ 75 One component, rapid setting “winter grade,” high performance mortar with high early strength for structural repair and form & pour applications. ChemSpeed™ 75 ES One component, extended set “summer grade,” high performance mortar with high early strength for structural repair and form & pour applications. ChemPatch™ VO1 One component, polymer modified, high strength, fast setting, non-shrink repair mortar with fiber and migrating corrosion inhibitor for deep vertical and overhead structural repairs. ChemPatch™ Fast VO One component, polymer modified, shrinkage compensated, very fast setting, non-shrink repair mortar with fibers and corrosion inhibitor. ChemPatch™ Form & Pour One component, shrinkage compensated, cementitious fiber reinforced with added Migrating Corrosion Inhibitor (CI) for added protection of rebar and structural steel. Excellent flow and pumping characteristics, suitable for large scale form and pour/pump applications. ChemMasters Thin Patch One component, polymer modified, multipurpose repair mortar designed for thin repairs to horizontal, vertical and overhead concrete. ChemPlug™ Fast setting expansive hydraulic cement compounded to withstand continual exposure to water and pressure. Available in standard, fast and slow setting formulas. Durapatch™ EPX Very high strength, chemical resistant epoxy patching mortar. Durapatch™ MMA Very high strength, chemical resistant methyl methacrylate patching mortar. Cures in low temperatures. P.A.C.™ Pourable anchoring cement. Fast setting, gypsum-free, high strength, expansive anchoring cement. FinishCrete™ Thin resurfacer and block filler for vertical and overhead applications. Spray, trowel or roller apply to create decorative finishes.
Translucent Tint Translucent pigment for acrylic cure & seals and sealers. Available in 5 standard colors in solvent-based formulation only. Slip Stop Micronized polymer beads that can be added to any floor coating product to provide improved slip resistance, fine texturing and gloss reduction.
Bridge & Wall Coatings Color Coat™ 100% acrylic coating for concrete and masonry. Standard and custom pigments available. Federal Specifications: TTC-555B & TTP 141D Color Coat™ XL 100% siliconized acrylic stain specifically formulated to have superior water shedding characteristics for exterior substrates. Standard and custom pigments available. Federal Specifications: TTC-555B & TTP 141D TextureDOT™ 100% acrylic, textured coating for concrete and masonry. Standard and custom pigments available. Specifications: ASTM C309; USDA when cured TextureDOT™ - Smooth 100% acrylic, smooth coating for concrete and masonry. Standard and custom pigments available. Specifications: ASTM C309; USDA when cured Duraguard™ 310CRU Two-component, chemical resistant, aliphatic urethane. Standard and custom pigments available. Use Safe-Cure & Seal EPX as primer as part of DOT listed epoxy/urethane coating system. Specifications: ACI 302.89, Table 1.1, Class 1, 2, 3, 4 & 5 floors; USDA when cured Graffiti Stopper™ Two-component urethane that repels most paints and inks used by taggers to create graffiti. Available in a variety of standard and custom pigments, and gloss finishes. Graffiti Seal™ Sacrificial anti-graffiti coating.
Self-Levelers Level Top™ Self leveling, pumpable, gypsum free underlayment. Level Top™ Supreme Self leveling, pumpable, gypsum free overlayment. Polishable. Level Top™ Supreme White Self leveling, pumpable, gypsum free white overlayment. Light reflective. Can be polished, dyed and pigmented to create decorative appearances. Level Top™ Primer Primer for Level Top™ and Level Top™ Supreme self levelers.
®
4
Grouts
Floor Hardeners
Cable Grout Non-shrink high performance, zero bleed, sand free grout for post tensioned structures.
Concolor™ Non-metallic, quartz aggregate shake-on floor surface hardener. Available in natural or custom pigments. Kemplate™ / Kemplate™ F40 Metallic aggregate shake-on floor surface hardener. Available in natural or custom pigments, and a “flat floor” formulation. Chemisil™ Clear, sodium silicate hardener and dustproofer for concrete. Chemisil™ Plus Chemically reactive solution of potassium-silicate with added siliconate to harden, densify and increase the service life of concrete. Specifications: ASTM C672; ASTM C642; ASTM E96; Fed. Spec. SSW 110C Chemisil™ Plus Li Chemically reactive solution of lithium-silicate with added siliconate to harden, densify and increase the service life of concrete. Resists white salt adhesion. Specifications: ASTM C672; ASTM C642; ASTM E96; Fed. Spec. SSW 110C Chemisil Plus OR Chemically reactive, oil resistant treatment for concrete.
Conset™ Grout Non-shrink construction grade grout. Specifications: ASTM C1107; CRD C 621 92 Conset™ Grout NY Non-shrink construction grade grout for NY State DOT projects. Specifications: ASTM C1107; CRD C 621 92 Conset™ Grout-XT Non-shrink, high performance construction grade grout with superior flow characteristics at installation temperature X-tremes. Specifications: ASTM C1107; CRD C 621 92 Gorilla Grout™ Non-shrink, non-metallic, very high strength construction grout. Specifications: ASTM C1107; CRD C 621 92 Kemset™ Grout Non-shrink, non-metallic high strength precision grout. Specifications: ASTM C1107; CRD C 621 92 Met-Ox™ Grout Non-shrink, non-catalyzed metallic precision grout. Specifications: ASTM C1107; CRD C 621 92 Polytops CR Grout Chemical resistant, three-component vinyl ester grout. ™
Polytops™ GC Grout High strength, general construction grade, three component epoxy grout. Polytops™ HF Grout High flow, high strength, three-component epoxy grout. Polytops™ MMA Grout Extremely high strength methyl methacrylate grout cures at temperatures below freezing.
Bonding Agents Cretelox™ Acrylic integral bonding additive and performance enhancing modifier for thin concrete and dampproof coatings. Specifications: ASTM C1059, Type II; ASTM C1438, Type II Duraguard™ 100 100% solids epoxy bonding agent.
Release Agents Release Solvent-based, dual action reactive concrete form release agent. Release Gel High viscosity water-based form release gel for superior release characteristics on shapes, radii and decorative forms. Release12 Highly refined, very light colored petroleum form release agent for use on decorative forms or anywhere appearance and performance are critical. Dual action is slightly reactive. Pleasant cherry scent. Safe Slip™ Water-based, dual action concrete form release agent. Safe Slip Concentrate™ Concentrated water-based, dual action concrete form release agent. One five-gallon pail makes 55 gallons of form release.
Rubbing & Resurfacing ChemRub Rubbing and resurfacing compound for vertical and overhead concrete.
Polyweld™ Bonding agent for concrete and plaster, rewettable one time. Specifications: ASTM C1059, Type I Polyweld™ EPX CI Epoxy bonding agent with migrating corrosion inhibitor. Level Top™ Primer Primer for Level Top™ and Level Top™ Supreme self levelers.
5
Spray Film is a “must-have” for every truck.
Retarders & Accelerators
Cleaners & Solvents
Exposee™ Surface retarder to create exposed aggregate look.
1203 Emulsifiable Solvent
Spray Film™ Water-based monomolecular evaporation retarder for use in hot, windy or low humidity conditions.
1207 Non-Methylene Chloride Stripper
Freezban™ / Freezban™ Beads Accelerator for mortar, cement-based plaster and stucco. Available in liquid or bead formulations. Specifications: ASTM C494, Type C; AASHTO M 194, Type C; CRD C87, Type C Freezban NC™ Non-Chloride accelerator and densifier for concrete and masonry. Specifications: ASTM C494, Type E; AASHTO M 194, Type E; CRD C87, Type E
Crack Repair & Sealers Duraguard™ 401 Very low viscosity, solvent-free, high molecular weight methacrylate penetrating sealer and crack healer. Duraguard™ 401-30E Very low viscosity, solvent-free, high molecular weight methacrylate penetrating sealer and crack healer with enhanced elongation for high flexural applications. Duraguard™ HM Sealer 100% solids, low viscosity, high modulus, moisture insensitive, gravity fed or injection epoxy crack filler and sealer.
Xylene Solvent cleaner. Skid-Daddle Rubber tire mark remover & general maintenance cleaner. Graffiti Eraser Removal of graffiti from Graffiti Stopper coating.
Floor Coatings DuraShield™ SRT High gloss, chemically resistant, abrasion resistant, odorless, catalyzed sealer for concrete. DuraShield SRT is safe enough to use indoors on concrete countertops, strong enough to be used indoors or outdoors on floors that may be exposed to caustic chemicals or foodstuffs, and glossy enough to be used on the finest decorative exposed aggregate or stamped concrete.
Duraguard™ 100 100% solids, low viscosity epoxy primer/sealer. Specifications: AASHTO M 235; USDA when cured
Cementitious Dampproofer Chemseal™ Dampproofing coating for vertical concrete or masonry. Above or below grade, interior or exterior applications. Standard and custom pigments available. Specifications: USDA when cured
Asphaltic Dampproofers MasterGard™ 400 Cold applied, water emulsion, semi-mastic dampproofer for concrete or masonry walls. Non-fibrated for brush or spray application. Specifications: ASTM D1227, Type III, Class 1; ASTM D1187, Type I
®
6
ÂŽ
ChemMasters Corporation 300 Edwards Street, Madison, OH 44057 Phone: 440-428-2105 Toll-Free: 800-486-7866 Fax: 440-428-7091 www.chemmasters.net info@chemmasters.net Independent Responsive Family Owned for Over 50 Years
V 2.0 Š 2019 ChemMasters