Products for Polished Concrete
Your Trusted Partner to Cure, Densify, Repair & Protect Polished Concrete ChemMasters understands the special challenges facing polished concrete contractors. In order to produce highly refined surfaces you need a team of highly refined concrete curing, preparation, repair and protection chemicals. Whether it’s new construction or an existing renovation, ChemMasters has the knowledge, experience and products you need to consistently produce high quality
polished substrates that meet and surpass demanding customer expectations. From start to finish, ChemMasters is your partner throughout the concrete curing, repair and polishing process, with reliable products to “guard” your work and keep it looking attractive for years to come. ®
Photos (above and right) courtesy of Site Source - Bear, DE
Cure EZ Strip CureDR Curing compound for freshly placed concrete to be polished. Will not clog or load diamond tooling and does not require removal prior to polishing.
Repair ChemSpeed™ 75 One component, rapid setting, high performance mortar with high early strength for structural repair and form & pour applications. Fast repairs of 1/2" to full depth. Cures down to 20° F. Accepts rubber wheel traffic within 2 hours. Level Top™ Primer Primer for self-leveling cementitious overlayments. Level Top™ Supreme Polishable, self-leveling, pumpable, gypsum free overlayment. Place at depths of feather edge to 4".
Densify Chemisil™ Clear, sodium silicate hardener, densifier and dustproofer for concrete. Chemisil™ Plus Li Chemically reactive solution of lithium-silicate with added siliconate to harden, densify and increase the service life of concrete. Resists white salt adhesion. Penetrates more deeply than other silicate densifiers.
Level Top™ Supreme White Polishable, self-leveling, pumpable, gypsum free white overlayment. Light reflective. Can be polished, dyed and pigmented to create decorative appearances.
Protect Chemisil™ Plus OR Chemically reactive, oil, grease and chemical resistant treatment for concrete. Fully penetrating, non-film forming stain protection for use on floors treated with ChemMasters Chemisil and Chemisil Plus Li hardener/densifiers. ChemGuard ChemGuard represents a quantum leap in polished concrete floor “guard” technology. Competitive products are blends of commercially available polymers and siliceous materials. By comparison, ChemGuard is formulated with customized polymers, hybridized silicates, and organically reacted colloidal silica; all of which have been synthesized for the express purpose of working in concert with one another to protect and enhance polished concrete floors. The result is a penetrating guard with superior stain & chemical resistance, durability, repairability and gloss.
ChemGuard Protection – Simple as 1-2-3 ChemGuard prolongs the life of decorative concrete floors and improves their aesthetics.
1
2
ChemGuard’s latex forms a crosslinked film on the substrate surface, providing stain resistance and improved aesthetics.
Functionalized silicate increases film hardness, scratch resistance, gloss and clarity.
• Superior Stain & Chemical Resistance • Increased Abrasion Resistance & Durability • Easily Repaired & Re-Coated
®
© 2018 ChemMasters
3 The ingredients in ChemGuard react to form covalent bonds, penetrate deeply into substrate capillaries and pores, increasing stain resistance and locking the entire system to the substrate.
ChemMasters Corporation 300 Edwards Street, Madison, OH 44057 Phone: 440-428-2105 Toll-Free: 800-486-7866 Fax: 440-428-7091 www.chemmasters.net info@chemmasters.net
Concrete Substrate
Independent Responsive Family Owned for Over 50 Years
Chemisil, ChemSpeed, EZ Strip Cure and Level Top are trademarks of ChemMasters, Inc. ChemMasters is a registered trademark of ChemMasters, Inc.