INDUSTRIAL STORAGE RACK PROGRAM
METAL FABRICATION PROGRAM
For more information and to shop all products, visit: WWW.DEWALTSHELVING.COM • WWW.DEWALTWELDING.COM
INDUSTRIAL STORAGE RACK PROGRAM WWW.DEWALTSHELVING.COM METAL FABRICATION PROGRAM WWW.DEWALTWELDING.COM OFFICIALLY LICENSED BY
TABLE OF CONTENTS RACK PROGRAM OVERVIEW
4
INDUSTRIAL RACKS
6
RACK ACCESSORIES
14
SHOP SEATING
22
METAL FABRICATION
26
INDEX
30
BUILD UP. BUILD OUT.
RACK PROGRAM OVERVIEW
â„¢
THE ULTIMATE WORK STATIONS
The DEWALT Storage Rack Program at a glance. BASE PRODUCTS & CONFIGURATIONS DXST10000 INDUSTRIAL RACK 6-FOOT. TALL / 4-SHELF pg. 8
DXST10000PBK 2 PIECE STEEL PEGBOARD KIT
DXST10000EXT 2-FOOT TALL / 1-SHELF HEIGHT EXTENDER KIT
DXST4500PBK 2 PIECE STEEL PEGBOARD KIT
DXST4500DK DRAWER KIT
DXST4500WTD WORKTOP DRAWER KIT
DXSTA2CM 2 PIECE CORD MINDER
DXSTA10MPB MAGNETIC PARTS BUCKET
For DXST10000 pg. 14
For DXST10000 pg. 16
4 STANDARD
CONFIGURATION
DXST4500 DXST4500 INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF
pg.9
For DXST4500 pg. 14
For DXST4500 pg. 15
For DXST4500 pg. 15
STANDARD
CONFIGURATION
ACCESSORIES FOR ALL RACKS DXSTA26CLB 2 PIECE 6-INCH CANTILEVER BRACKETS pg. 16
WWW.DEWALTSHELVING.COM
DXSTA04MP 4 PACK LEVELING FEET pg. 17
pg. 18
pg. 18
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™
1 2 3 4 5
CHOOSE YOUR RACK ��������������������������������������������������������������������������������������������������������������������������������������������������������6-Foot Tall / 4-Foot Tall CHOOSE YOUR PEGBOARD �������������������������������������������������������������������������������������������������������������� 6-Foot Tall Rack / 4-Foot Tall Rack CHOOSE YOUR DRAWER (available only for 4-foot configurations) ������������������������������������������������������ Drawer Kit / Worktop Drawer Kit ADD YOUR ACCESSORIES �������������������������������������������������������������������������������������������������������������������� Storage / Organization / Lighting BUILD YOUR CONFIGURATION ��������������������������������������������������������������������������������������������������������Standard / Stacked / Workbench * DXST10000 workbench configuration requires two complete racks
RACK PROGRAM OVERVIEW
GET STARTED:
5 STACKED
WORKBENCH
CONFIGURATION
CONFIGURATION * DXST4500 stacked and workbench configurations require two complete racks
WORKBENCH
STACKED
CONFIGURATION
CONFIGURATION
DXSTA500LM 3 PACK MOTION SENSOR LIGHT KIT pg. 19
DXSTA151PS 15 AMP POWER STATION WITH GFCI AND DETACHABLE WORK LIGHT pg. 19
NEXT STEP:
COMPLETE YOUR WORK STATION WITH SHOP SEATING: See pages 20-23 DXSTFH030 SWIVEL SHOP STOOL ��������������������� pg. 22 DXSTAH025 ADJUSTABLE SHOP STOOL WITH CASTERS �������������������������������� pg. 22 DXSTFB048 GARAGE BENCH ������������������������������� pg. 23 OFFICIALLY LICENSED BY
INDUSTRIAL RACKS 6
ALL DEWALT STORAGE RACKS FEATURE:
PROTECTIVE TOP CAPS
FLUSH TOP SHELF MOUNT & SHELF LOCKING PINS
TWO DIFFERENT TYPES OF LOAD-BEARING STRAPS
INDUSTRIAL WIRE GRID & GRID STABILITY CLIPS
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™
ABOUT THE RACKS YOUR RACK. BUILT DEWALT TOUGH. The DEWALT line of Industrial Racks was designed and engineered to provide heavy-duty storage for the professional and home user. Each rack features innovative details that aren’t typically found on industrial racks, such as dense wire grids that prevent items from falling through, safety straps with weld nuts for ease of assembly, and top caps that protect both you and your items from possible damage.
STRENGTH YOU CAN COUNT ON. The DXST4500 and DXST10000 feature the highest total load capacity for any storage rack their size. We’re talking about two and five tons of pure DEWALT might. To ensure the shelves stay strong, we’ve added two types of support straps that prevent them from buckling under pressure. No other brand can stack up to that kind of muscle.
HASSLE-FREE ASSEMBLY. Both racking systems expand out of their boxes with pre-installed upright bolts, greatly reducing the stress that comes from assembling industrial racks. We’ve even included a hex bit to use with your favorite DEWALT impact driver, so you’ll be in, out, and organized in no time.
STACKING PLATES & POWDER-COATED FINISH
PROTECTIVE CAPPED NYLON FEET
SAFETY WALL MOUNT BRACKET
UNSURPASSED CAPACITY
DXST10000
INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF
INDUSTRIAL RACKS
56829
8
Height
72" (182.8 cm)
Width
77" (195 cm)
Depth
24" (61 cm)
2500 LB. SHELF CAPACITY
• 10,000 lb. maximum capacity from 3 industrial wire grid shelves and 1 wood composite deck that can each support 2,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Each of the 4 shelves feature a total of 8 support straps between the crossbeams to prevent them from twisting or spreading under heavy loads • 4 clips on each wire rack lock the grid into place on the crossbeams keeping it secure and preventing warping • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping • Shelf heights are fully customizable allowing each to be individually adjusted in 3-inch increments
24"
60.96 CM
• Easy to assemble design comes with pre-installed horizontal and diagonal support beams on two uprights
RACK DEPTH
3"
7.62 CM INCREMENTS
ADJUSTABLE SHELVES
CAPPED FEET PROTECTS AGAINST CORROSION
* Configurations require two complete racks
WORKBENCH
CONFIGURATION WWW.DEWALTSHELVING.COM
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ DXST4500
INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF 56831
47" (119.4 cm)
Width
49.5" (125.7 cm)
Depth
18" (45.7 cm)
1500 LB.
INDUSTRIAL RACKS
Height
SHELF CAPACITY
• 4,500 lb. maximum capacity from the 3 black laminate wood composite decks that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Each of the 3 shelves features a total of 5 support straps to prevent twisting or spreading under heavy loads • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping
9
• Shelves are adjustable in 2.35-inch increments • Join multiple racks together to create a complete storage or workspace solution • Easy to assemble design comes with pre-installed horizontal and diagonal support beams on two uprights
18"
45.72 CM
RACK DEPTH
2.35"
5.97 CM
CAPPED FEET
INCREMENTS
ADJUSTABLE SHELVES
PROTECTS AGAINST CORROSION
* Configurations require two complete racks
STACKED
CONFIGURATION
WORKBENCH
CONFIGURATION OFFICIALLY LICENSED BY
DXST4500-W
INDUSTRIAL RACK WITH WIRE GRIDS 4-FOOT TALL / 3-SHELF
INDUSTRIAL RACKS
41590
10
Height
47" (119.4 cm)
Width
49.5" (125.7 cm)
Depth
18" (45.7 cm)
1500 LB. SHELF CAPACITY
• 4,500 lb. maximum capacity from the 3 wire grid shelves that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Each of the 3 shelves features a total of 5 support straps to prevent twisting or spreading under heavy loads • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping • Shelves are adjustable in 2.35-inch increments • Join multiple racks together to create a complete storage or workspace solution • Easy to assemble design comes with pre-installed horizontal and diagonal support beams on two uprights
18"
45.72 CM
RACK DEPTH
2.35"
5.97 CM
CAPPED FEET
INCREMENTS
ADJUSTABLE SHELVES
PROTECTS AGAINST CORROSION * Configurations require two complete racks
STACKED
CONFIGURATION WWW.DEWALTSHELVING.COM
WORKBENCH
CONFIGURATION
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ DXST3000WB
2-SHELF INDUSTRIAL STORAGE RACK WORK STATION 41631
56.25" (142.9 cm)
Width
49.5" (125.7 cm)
Depth
18"
1500 LB.
(45.7 cm)
INDUSTRIAL RACKS
Height
SHELF CAPACITY
• 3,000 lb. maximum capacity from the 1 black laminate wood shelf and 1 wire grid shelf that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Drawer measures 6-inches tall x 42-inches wide x 16.5-inches deep, has smooth, gliding ball-bearing slides and a 120 lb. capacity • Steel pegboard panel mounts between uprights or on its own vertical supports and features 1-inch on center spacing • Kit includes 6 pegboard hangers to let you store power tools, screwdrivers, pliers, air tools, and more • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves
11
• Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping
18"
45.72 CM
RACK DEPTH
5.97 CM
INCREMENTS
ADJUSTABLE SHELVES
PROTECTS AGAINST CORROSION
* Configurations require two complete racks
INCLUDES: 1 2 3 4 5 6
CAPPED FEET
2.35"
(2) Upright Assemblies (1) Wire Decks (1) Laminate Decks (1) Drawer (1) Pegboard (6) Pegboard Tool Organizers
(1) Large Tool Holder
5
(3) Single Peg Hooks
(1) Screwdriver Holder
(1) Power Tool Holder
6
3
4
1
WORKBENCH
CONFIGURATION
STACKED
CONFIGURATION
2
OFFICIALLY LICENSED BY
DXST6000WB
4-SHELF INDUSTRIAL STORAGE RACK WORK STATION 41609
INDUSTRIAL RACKS
HORIZONTAL
12
VERTICAL
Height
47"
(119.4 cm)
Height
49.5" (125.7 cm)
Width
148.5" (337.2 cm)
Width
94"
(238.8 cm)
Depth
18"
Depth
18"
(45.7 cm)
(45.7 cm)
1500 LB. SHELF CAPACITY
• 6,000 lb. maximum capacity from the 2 black laminate wood shelves and 2 wire grid shelves that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Drawer measures 6-inches tall x 42-inches wide x 16.5-inches deep, has smooth, gliding ball-bearing slides and a 120 lb. capacity • Steel pegboard panel mounts between uprights or on its own vertical supports and features 1-inch on center spacing • Kit includes 6 pegboard hangers to let you store power tools, screwdrivers, pliers, air tools, and more • Customizable cord minder lets you conveniently store extension cords and have rotating end stops for easy cord removal • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping * Tools not included
INCLUDES: 1 2 3 4 5 6 7
(4) Upright Assemblies (2) Wire Decks (2) Laminate Decks (1) Drawer (1) Pegboard (6) Pegboard Tool Organizers (1) Cord Minder Set
(1) Large Tool Holder
5
(3) Single Peg Hooks
(1) Screwdriver Holder
6
3
7
4
1
WORKBENCH
CONFIGURATION 2
WWW.DEWALTSHELVING.COM
(1) Power Tool Holder
STACKED
CONFIGURATION
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™
INDUSTRIAL RACKS & SHOP SEATING SLEEK BLACK POWDER COATING 1
DXST4500BLK
2
DXST4500BLK-W 41659 4-Foot / 3-Shelf (Wire) Industrial Rack, Black
3
DXST10000BLK
41660 6-Foot / 4-Shelf Industrial Rack, Black
4
DXSTFH030BLK
41664 Swivel Shop Stool, Black
5
DXSTAH025BLK
41665 Adjustable Shop Stool with Casters, Black
6
DXSTFB048BLK
41666 Garage Bench, Black
41658 4-Foot / 3-Shelf Industrial Rack, Black
INDUSTRIAL RACKS
COMING SOON…
13
3
1
2
6
4 5
OFFICIALLY LICENSED BY
RACK ACCESSORIES 14
VERSATILE DEWALT ACCESSORIES INCLUDE:
STEEL PEGBOARDS MOUNT DIRECTLY TO UPRIGHTS OR WALL
MAGNETIC MOUNT BUCKETS & PEGBOARD ACCESSORIES
DRAWERS CONVERT YOUR RACK INTO A FUNCTIONAL WORK STATION
CORD MINDERS KEEP CORDS TIDY & CONVENIENT
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.â„¢
ABOUT THE ACCESSORIES DEWALT TOUGH ADD-ONS. Designed and engineered to the same exact requirements as the racks they are meant to attach to, these add-ons feature the same durable powder-coated steel construction as the industrial racks. So go ahead and customize your storage rack with the confidence that each piece is DEWALT TOUGH.
UPGRADING DONE RIGHT. Accessories are meant to take something useful or handy and make it indispensable. From bringing more secure footing on uneven flooring to adding additional storage through more shelves, drawers, pegboards, and lighting, each of these accessories take the basic DEWALT storage rack to new heights of organizational might.
HASSLE-FREE ASSEMBLY. An easy to assemble storage rack deserves accessories that are just as easy to attach. These easily installed accessories utilize the same holes on the uprights used to mount the shelves and powerful magnets to attach to the steel rack so you can spend less time on assembly, and more time on projects.
CANTILEVER BRACKETS STORE LONG OBJECTS ON YOUR RACK
CANTILEVER RACK CREATES EXTRA STORAGE FOR LONG SUPPLIES
MULTI-FUNCTIONAL POWER STATION
LIGHTING COMPLETES YOUR SETUP TO ILLUMINATE YOUR SPACE
DXST10000PBK
2 PIECE STEEL PEGBOARD KIT FOR DXST10000 INDUSTRIAL RACK
RACK ACCESSORIES
41554
Height
24" (61 cm)
Width
71" (180.3 cm)
• Pegboards are constructed of durable steel that will easily outlast wood and composite boards • Industrial grade powder-coating won’t chip or fade and matches the appearance and texture of the rack’s existing laminate wood composite deck • Locking pins on the mounting brackets keep them in place • Included mounting brackets and extensions let you attach a panel to both sides of the rack, stack two on the back, or one side and one back • Features standard 1-inch on center spacing with 1/4-inch diameter holes to fit most standard pegboard accessories • Each steel pegboard panel measures 24-inches x 71-inches • With no tools required to attach the panels, installation is easy regardless of chosen mounting configuration
16
• Includes hardware for mounting directly to a finished wall as an additional organization option
MOUNTS TO UPRIGHTS
DXST4500PBK
2 PIECE STEEL PEGBOARD KIT FOR DXST4500 INDUSTRIAL RACK 41557
Height
18" (45.72 cm)
Width
44" (111.76 cm)
• Pegboards are constructed of durable steel that will easily outlast wood and composite boards • Industrial grade powder-coating won’t chip or fade and matches the appearance and texture of the rack’s existing laminate wood composite decking • Locking pins on the mounting brackets keep them in place • Included mounting brackets and extensions let you attach a panel to both sides of the rack, stack two on the back, or one side and one back • Features standard 1-inch on center spacing with 1/4-inch diameter holes to fit most standard pegboard accessories • Each steel pegboard panel measures 18-inches x 44-inches • With no tools required to attach the panels, installation is easy regardless of chosen mounting configuration • Includes hardware for mounting directly to a finished wall as an additional organization option
WWW.DEWALTSHELVING.COM
MOUNTS TO UPRIGHTS
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ DXST4500DK
DRAWER KIT FOR DXST4500 INDUSTRIAL RACK 41559
6.21" (15.77 cm)
Width
42.95" (109.09 cm)
Depth
16.86" (42.82 cm)
120 LB.
RACK ACCESSORIES
Height
LOAD CAPACITY
• Turn your existing 4-foot storage rack into a functional workbench with a shelf-sized storage drawer • Drawer measures 6-inches tall x 42-inches wide x 16.5-inches deep for storage that stretches from upright to upright • The drawer’s durable steel construction has an industrial grade powder-coating finish that won’t chip or fade • Smooth gliding ball bearing drawer slides open and closed easily • Drawer can comfortably support up to 120 lb. of stored tools when distributed evenly across its interior • Uses the same 2.35-inch adjustment as the shelf crossbeams to let it sit snugly underneath an existing shelf • Comes with front, back, and side panels pre-attached to drawer floor for quick and easy assembly
MOUNTS TO UPRIGHTS
DXST4500WTD
WORKTOP DRAWER KIT FOR DXST4500 INDUSTRIAL RACK 41567
Height
8.27" (21.01 cm)
Width
44.13" (112.09 cm)
Depth
19.12" (48.56 cm)
1000 LB.
120 LB.
WORKTOP CAPACITY
DRAWER CAPACITY
• Turn your existing 4-foot storage rack into a functional workbench with this worktop drawer that functions as a shelf replacement or an additional shelf/work surface • With the capacity to support up to 1,000 lb. on the work surface, the worktop drawer can be used to join two DXST4500 Industrial racks together to create the ultimate workbench • The drawer’s durable steel construction has an industrial grade powder-coating finish that won’t chip or fade • Smooth gliding ball bearing drawer slides open and closed easily • Drawer can comfortably support up to 120 lb. of stored tools when distributed evenly across its interior • Uses the same 2.35-inch adjustment as the shelf crossbeams
MOUNTS TO UPRIGHTS OFFICIALLY LICENSED BY
17
DXST10000EXT
2-FOOT TALL / 1-SHELF HEIGHT EXTENDER KIT FOR DXST10000 INDUSTRIAL RACK
RACK ACCESSORIES
41545
18
Height
24" (61 cm)
Width
77" (195 cm)
Depth
24" (61 cm)
2500 LB. SHELF CAPACITY
• Add another 2-feet of height and another shelf to your existing 6-foot DEWALT storage rack • Wire grid shelf has the same massive capacity as existing shelves at 2,500 lb. when evenly distributed • The industrial powder-coating finish on the steel uprights, support straps, and crossbeams won’t chip or fade • Wire grid shelf features a total of 8 shelf and beam support straps to prevent twisting or spreading under heavy loads • Steel stacking plates securely connect the extension to existing rack uprights • Locking pins on crossbeams and stacking plates secure them in place while grid clips hold the wire deck and prevent warping • Shelf is adjustable in the same 3-inch increments as the DXST10000 rack • Rugged glass-filled nylon feet prevent scratched flooring and allow extension to be used as a short, stand-alone rack
CAPPED FEET PROTECTS AGAINST CORROSION
24"
60.96 CM
RACK DEPTH
3"
7.62 CM INCREMENTS
ADJUSTABLE SHELVES
DXSTA26CLB
2 PIECE 6-INCH CANTILEVER BRACKETS 41599
Height
3.5" (8.89 cm)
Width
7" (17.78 cm)
Depth
5" (12.7 cm)
50 LB. LOAD CAPACITY
• Each arm can support 50 lb. for a total storage capacity of 100 lb. when evenly distributed • Made of durable steel with an industrial grade powder-coating finish that won’t chip or fade • The arms on each bracket feature a 2.5-inch flat tab on the end to prevent round stock from rolling off • Locking pins secure brackets to rack uprights and prevents movement when bumped or while loading material • Mounts to the uprights on both DXST4500 4-foot, and DXST10000 6-foot DEWALT storage racks
UNIVERSAL UPRIGHT MOUNT FITS DXST4500 & DXST10000 RACKS
WWW.DEWALTSHELVING.COM
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ DXSTACLR
3 PIECE WALL MOUNT CANTILEVER RACK
Assembled Height
36" (91.44 cm)
Arm Load Capacity
Small Arm Length
6" (15.24 cm)
50 lbs
Medium Arm Length
10" (25.4 cm)
25 lbs
Large Arm Length
12" (30.48 cm)
16 lbs
• Each short arm can support 50 lb., 25 lb. per medium arm, and 16 lb. per long arm for a total of 273 lb. of evenly distributed storage • Set includes 3 different cantilever arm lengths with 6-inch, 10-inch, and 12-inch lengths • Arms and rails are made of durable steel with an industrial grade powder-coating finish that won’t chip or fade • Each support arm features a 2.5-inch flat tab on the end to prevent round stock from rolling off • 36-inch tall wall mount rails easily mount to both finished walls or to bare 2x4 studs • Cantilever arms can be adjusted in 2.35-inch increments • 6-inch, 10-inch, and 12-inch arms support common lumber depths to make functional shelves
6"
15.24 CM
10 " 25.4 CM
2.35"
5.97 CM INCREMENTS
12 " 30.48 CM MULTIPLE ARM DEPTHS
ADJUSTABLE ARMS
DXSTA04MP
4 PACK LEVELING FEET 41568 • Add additional security to your DEWALT storage rack with these leveling mounting plates • Mounting plates are made of durable steel and replace the rack’s existing glass filled nylon non-marring feet • Provides up to 7-inches of height adjustment to each upright allowing for easy rack leveling on uneven floors • Designed to fit DEWALT DXST10000, DXST4500, and DXST4500-W storage racks • Includes wedge anchors to allow plates to be secured to concrete floors for additional tipping prevention
LEVEL OUT UNEVEN SURFACES OFFICIALLY LICENSED BY
RACK ACCESSORIES
41589
19
DXSTA10MPB
MAGNETIC PARTS BUCKET
RACK ACCESSORIES
41564
Height
3.5" (8.89 cm)
Width
7"
(17.78 cm)
Depth
5"
(12.7 cm)
• Bucket mounts securely on storage rack beams and supports, steel pegboards, tool boxes, lifts, and almost any metal surface • Rugged polypropylene construction can absorb impacts from hard use and resists most chemicals and solvents • 3 powerful neodymium mounting magnets let the bucket hold a few pounds of parts and components • 3 back and 3 bottom magnet mounting points allow you to mount the bucket vertically or horizontally • Grooved dividers on the interior surface help separate small parts while working • Bucket measures 7-inches wide x 3.5-inches high x 5-inches deep
20
MAGNETIC MOUNT
DXSTA2CM
2 PIECE CORD MINDERS 41600
Height
6.3" (16 cm)
Width
2.7" (6.9 cm)
Depth
6.8" (17.3 cm)
50 LB. LOAD CAPACITY
• Each set of arm brackets can support a total of 50 lbs. easily enough to hold 100-feet of 10/3 heavy-duty cord • Mounts to the uprights on both DXST4500 4-foot, and DXST10000 6-foot DEWALT storage racks • Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • The end stops on each bracket feature a spring loaded rotating end stop that can lock into place in 90-degree increments • Locking pins secure the cord minder brackets to rack uprights and prevents movement when bumped or while loading
UNIVERSAL UPRIGHT MOUNT 360º ROTATING BRACKET
WWW.DEWALTSHELVING.COM
FITS DXST4500 & DXST10000 RACKS
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ DXSTA500LM
3 PACK MOTION SENSOR LIGHT KIT 41553 • Made of durable and lightweight aluminum with a fire-retardant ABS plastic casing and a polycarbonate lens over the LEDs
RACK ACCESSORIES
• Included motion sensor with on/off/sensor modes and a 5-minute automatic shutoff delay if no motion is detected • The 3 light strips together provide 500 lumens of bright LED illumination without the heat generated by traditional bulbs • Low profile design uses a minimum footprint to provide light to your racks without using up your storage space • Each light has a pair of powerful neodymium magnets for easy and secure attachment to any steel storage rack • Kit includes 8 hook-and-loop strips to help manage power and jumper cords and keep your storage area tidy • Link together up to 6 LED strips per sensor to cast light on the largest storage racks (additional LED strips sold separately)
500 LED LUMENS
HANDS-FREE OPERATION
MAGNETIC MOUNT
DXSTA151PS
15 AMP POWER STATION WITH GFCI AND DETACHABLE WORK LIGHT 41594
Height
5.5"
(13.97 cm)
Width
14.75" (37.47 cm)
Depth
3.5"
(8.89 cm)
• 8 standard 3-prong outlets and 2 USB outlets • Detachable and rechargeable LED work light built into handle produces up to 500 lumens of illumination with a 4 hour battery life • Built-in, resettable 15 AMP circuit breaker protects against damage from power surges • In-line GFCI will cut electricity to the entire power station if unintended current flow is detected • Anti-skid rubber feet keep the unit from moving when used as a light and can be removed to allow for wall mounting • Includes a pair of mounting brackets to allow easy mounting to DXST100000 or DXST4500 series industrial racks • 50 lb. capacity steel cord minder has rotating end stops able to hold up to 100-feet of 10/3 cable and mounts to DEWALT rack uprights
UNIVERSAL UPRIGHT MOUNT
500 LED LUMENS
SJTW 12/3
FITS DXST4500 & DXST10000 RACKS
OFFICIALLY LICENSED BY
21
SHOP SEATING 22
ALL DEWALT SHOP SEATING FEATURES:
FOAM-PADDED SEAT WITH TEXTURED VINYL COVER
ALL STEEL FRAME WITH POWDER-COATING FINISH
WIRE GRID LOWER SHELF
SELF-LEVELING FEET (STOOLS ONLY)
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™
ABOUT THE SEATING TOUGH STEEL. COMFORTABLE SEAT. Professional and home workshops need seating that can handle the often rough conditions found there, so we took the features that made our industrial racks stand out and used them to provide seating options that outlast all others in durability. Durable steel frames coupled with rip-resistant cushioned seating that can take the knocks, falls, and rigors of the workshop and keep coming back for more.
HASSLE-FREE ASSEMBLY. In the tradition begun with the industrial storage racks, the DEWALT stools and bench are designed so their assembly is as stress-free as we can make it. So stress-free in fact that for the stools, we’ve done most of the assembly for you ahead of time, so you need only take a few minutes to attach the seat and you’re off.
PROTECTIVE CAPPED FEET
DXSTFH030
SWIVEL SHOP STOOL 41561
Height
30"
Width
17.25" (43.82 cm)
(76.2 cm)
Depth
17.25" (43.82 cm)
300 LB. SEAT CAPACITY
SHOP SEATING
• 360-degree swiveling, foam-padded seat with textured vinyl cover that resists rips and tears • Industrial strength wire grid lower shelf to store necessary tools and supplies • Rugged glass-filled nylon leveling feet prevent scratched flooring and can be easily hand adjusted • Heavy-duty, all steel frame construction with a 300 lb. capacity • Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • Durable and heavy-duty bolted frame comes pre-assembled
360˚
24
SWIVEL SEAT
CAPPED FEET SELF-LEVELING
DXSTAH025
ADJUSTABLE SHOP STOOL WITH CASTERS 41562
Height
22.5" - 26.75" (57.15 - 67.9 cm)
Width
15.75" (40 cm)
Depth
15.75" (40 cm)
300 LB. SEAT CAPACITY
• 360-degree swiveling, foam-padded seat with textured vinyl cover that resists rips and tears • Pneumatic adjustable seat adjusts stool height from 22.5 to 26.75-inches to best suit your needs • Industrial strength wire grid lower shelf to store necessary tools and supplies • Choose mobility or floor protection with the included 360-degree casters and glass-filled nylon feet • Heavy-duty, all steel frame construction with a 300 lb. capacity
360˚
• Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • Durable and heavy-duty bolted frame comes pre-assembled with casters attached WWW.DEWALTSHELVING.COM
SWIVEL SEAT
SWIVEL CASTERS
SELF-LEVELING
PROTECTS AGAINST CORROSION
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ DXSTFB048
GARAGE BENCH 41563
Height
19.75" (50.16 cm)
Width
49.6" (126 cm)
Depth
18"
(45.7 cm)
1000 LB.
1500 LB.
SEAT CAPACITY
SHELF CAPACITY
• Benchtop can easily support 1,000 lb. and the wire grid shelf can hold an evenly distributed 1,500 lb. • Four locking grid clips keep the wire shelf deck secure and prevent warping under heavy loads • Rugged glass-filled nylon feet prevent scratched flooring • Heavy-duty, all steel frame construction with locking pins to keep crossbeams securely seated • Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • Storage shelf can be adjusted in 2.35-inch increments
2.35"
5.97 CM
CAPPED FEET
SHOP SEATING
• Comfortable, high density foam-padded seat with textured vinyl cover that resists rips and tears
INCREMENTS
ADJUSTABLE SHELVES
PROTECTS AGAINST CORROSION
25
THE ULTIMATE SOLUTIONS. WWW.DEWALTSHELVING.COM/AR-VIEW offers an Augmented Reality view to see DEWALT shelving in your own space before you buy. Just look for this icon! OFFICIALLY LICENSED BY
26
METAL FABRICATION
METAL FABRICATION PROGRAM WORK SMART. WELD SAFE.™
WORK SMART. WELD SAFE.™ Welding exposes you to a slew of dangerous conditions including sharp metal, coarse surfaces, high temperatures, molten metal, and bright lights. DEWALT’s line of welding gloves and helmets are designed to protect you from all of these with high quality, fire-resistant materials and lightning fast lens filters that can stand up to the normal wear and tear just as well as the intense heat of welding. To complement that protection, DEWALT welding tables and sawhorses give you a stable platform on which to work.
DEWALT TOUGH. NO BULL. Toughness in welding gloves is not a convenience, it is a requirement. Our welding gloves are made using 100% grade-A leather across the palms and our fabricator gloves feature additional padding on the knuckles for impact protection. Both lines feature Kevlar® threading and reinforcing patches on hard wearing locations to bring you unparalleled toughness and protection that doesn't come at the cost of the dexterity you need.
ADJUSTABILITY, AND THEN SOME. Our welding sawhorses and work table are designed to be more than just a flat, height adjustable surface to rest projects on. They are engineered to give you a range of convenient features not found on standard portable sawhorses and tables intended solely for welding. Strategically located slots and post holes allow easy clamping of work projects of any size and shape and integrated ground studs give a secure place for grounding leads. All these and more, in a collapsible, easily portable package.
METAL FABRICATION
WELDING GLOVE PART #
DXMF01011
DXMF01052
DXMF02051
DXMF03051
DXMF04051
PRODUCT DESCRIPTION
PREMIUM FABRICATOR WELDING GLOVES
PREMIUM SHORT CUFF FABRICATOR WELDING GLOVES
PREMIUM MIG/TIG WELDING GLOVES
PREMIUM TIG WELDING GLOVES
PREMIUM STICK WELDING GLOVES
METAL FABRICATION
METAL FABRICATION
MIG/TIG WELDING
✔ ✔
TIG WELDING
✔ ✔
STICK/MIG WELDING
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔
TYPE OF WELDING
Available in 6 sizes, Small–3X-Large
28
100% Grade-A buffalo leather provides maximum abrasion resistance without sacrificing dexterity 100% Grade-A Goat leather provides maximum abrasion resistance without sacrificing dexterity Glove features heat and fire-resistant Kevlar® stitching throughout the entire glove Leather reinforcing along the thumb saddle, palm, finger caps, and a drag patch for long glove life Snug-fitting elastic-sewn wrist keeps out debris while welding and allows glove to be easily slipped on and off Adjustable cuff enclosure provides a custom fit Made of fire-resistant materials to protect you from open flames, sparks, slag, and spall 100% leather shell provides excellent fire and heat insulation to protect against open flames, sparks, slag and spall Long, gauntlet-style open cuff is quick to put on and easily accommodates fire-resistant sleeves and jackets Long, gauntlet-style open cuff is quick to put on and features a hook-and-loop adjustable design for a snug fit Additional fire-resistant cotton padding provides increased impact protection to knuckles Index finger is fully seamless to promote accurate welds and help decrease slag drips
WWW.DEWALTWELDING.COM
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
✔ ✔
✔
✔ ✔
✔ ✔
✔ ✔
METAL FABRICATION PROGRAM WORK SMART. WELD SAFE.™ DXMF4618WT
ADJUSTABLE WELDING TABLE 92796
8" - 36" (20.3 - 91.4 cm)
Width
46" (116.8 cm)
Depth
18" (54.7 cm)
1000 LB.
METAL FABRICATION
Height
WORKTOP CAPACITY
• Strategically located slots / post holes for mounting and clamping any shape project • Useable folded up atop existing work table or as a 36-inch tall free-standing welding station • Table legs have both spring pin / snap button locks and locking for added security under load • Conveniently located ground stud for connecting grounding clamps and leads • Oversized eye bolt ideal for holding welding guns and electrodes between uses • Cord minder helps keep cord slack under control and prevent tripping hazards
3/4"
PLASTIC FEET
FITS STANDARD POSTS
NON-CONDUCTIVE
3/4"
PLASTIC FEET
FITS STANDARD POSTS
NON-CONDUCTIVE
HOLES
ADJUSTABLE LEGS
DXMF3603WSH
ADJUSTABLE LEG WELDING SAWHORSE 92799
Height
25" - 33" (63.5 - 83.8 cm)
Width
36" (91.4 cm)
Depth
3" (7.6 cm)
1300 LB. LOAD CAPACITY
• Strategically located 3/4-inch diameter post holes for mounting and clamping any shape project • Two V-shaped, toothed notches hold pipes and other stock for cutting and welding • Sawhorse legs have both tension latch locks and locking pins for added security when under load • Conveniently located grounding stud for connecting grounding clamps and leads • Oversized eye bolt ideal for holding welding guns and electrodes between uses
HOLES
METAL SUPPORTS
• Fold-out tabs on legs help support square stock, pipes, and other welding materials
HOLD LONG MATERIALS
OFFICIALLY LICENSED BY
29
METAL FABRICATION / INDEX
DXMF21011
30
LARGE WINDOW AUTO-DARKENING WELDING HELMET 41603
Pano Viewing Area
20.4 sq in (51.8 sq cm)
Shade Range
DIN 4 / 5-8 / 9-13
Grind Mode
Yes
Arc Sensors
4
Switching Time
1/15,000 s
Delay Range
0.2 - 1 s
Weight
1.55 lb (703 g)
Power Supply
CR2450 battery, solar assist (included) ACCESSORIES AND REPLACEMENT PARTS:
• 4 lightning fast arc sensors engage and darken the filter in 1/15,000 of a second
41603-ADF
Replacement Auto Darkening Filter
• Independent shade control allows you to fine tune the DIN level according to preference or welding process
41603-FPL
Replacement Front Protective Lens
41603-IPL-5PK
Inner Protective Lens 5-Pack
41603-HDGR
Replacement Adjustable Headgear
• Adjustable lightening delay can be set from 0.2 - 1.0s to reduce user eye strain and fatigue
Z87+
• Auto-darkening filter is protected from sparks and slag by both a large exterior and a smaller interior protective lens • CR2450 battery is augmented by a solar cell that charges as you weld for lasting power • Multi-point adjustable headgear with integrated sweat band stays comfortable during long welding jobs
AUTO DARKENING
PANORAMIC VIEW
GRINDING MODE
IMPACT PROTECTION
PAGE REFERENCES AND PACKAGING INFORMATION INDUSTRIAL RACKS DXST10000 �����������������������������������������������������������pgs. 4, 5, 6, 7, 8, 12 INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF 56829 PACKAGING DIMS: 75.25" L x 25.25" W x 5.44" H WEIGHT: 183 lbs
DXST6000WB ������������������������������������������������������������������ pgs. 6, 7, 12 4-SHELF INDUSTRIAL STORAGE RACK WORK STATION 41609 PACKAGING DIMS: 49.61" L x 19.29" W x 9.84" H WEIGHT: 149.91 lbs
DXST3000WB ������������������������������������������������������������������ pgs. 6, 7, 11 2-SHELF INDUSTRIAL STORAGE RACK WORK STATION 41631 PACKAGING DIMS: 50.39" L x 19.09" W x 6.81" H WEIGHT: 108.02 lbs
DXST4500-W ������������������������������������������������������������������ pgs. 6, 7, 10 INDUSTRIAL RACK WITH WIRE GRIDS 4-FOOT TALL / 3-SHELF 41590 PACKAGING DIMS: 48.5" L x 18.5" W x 4.75" H WEIGHT: 70 lbs WWW.DEWALTWELDING.COM
DXST4500 ������������������������������������������������������pgs. 2, 3, 4, 5, 6, 7, 9, 20 INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF 56831 PACKAGING DIMS: 48.5" L x 18.5" W x 4.75" H WEIGHT: 71 lbs
RACK ACCESSORIES DXST10000EXT ��������������������������������������������������� pgs. 4, 5, 14, 15, 18 2 FOOT TALL / 1-SHELF HEIGHT EXTENDER KIT for DXST10000 Industrial Rack 41545 PACKAGING DIMS: 13.39" L x 75.59" W x 3.54" H WEIGHT: 56 lbs
DXST10000PBK ��������������������������������������������������� pgs. 4, 5, 14, 15, 16 2 PIECE STEEL PEGBOARD KIT for DXST10000 Industrial Rack 41554 PACKAGING DIMS: 75.98" L x 24.8" W x 2.36" H WEIGHT: 61.73 lbs DXST4500DK ����������������������������������������������������pgs. 2, 4, 5, 14, 15, 17 DRAWER KIT for DXST4500 Industrial Rack 41559 PACKAGING DIMS: 45.07" L x 19.48" W x 1.97" H WEIGHT: 30.86 lbs
METAL FABRICATION PROGRAM WORK SMART. WELD SAFE.™ PAGE REFERENCES AND PACKAGING INFORMATION RACK ACCESSORIES
DXSTFH030 �����������������������������������������������������������pgs. 3, 5, 22, 23, 24 SWIVEL SHOP STOOL 41561 PACKAGING DIMS: 18.3" L x 18.3" W x 26.38" H WEIGHT: 22.04 lbs
DXST4500PBK ������������������������������������������pgs. 3, 4, 5, 14, 15, 16, 22
METAL FABRICATION
DXST4500WTD �������������������������������������pgs. 3, 4, 5, 6, 14, 15, 16, 22 WORKTOP DRAWER KIT for DXST4500 Industrial Rack 41567 PACKAGING DIMS: 46.25" L x 21" W x 9" H WEIGHT: 64.65 lbs
DXMF21011 ������������������������������������������������������������������ pgs. 26, 27, 30 LARGE WINDOW AUTO-DARKENING WELDING HELMET 41603 PACKAGING DIMS: 12.13" W x 15.19" H x 10" D WEIGHT: 1.55 lbs
DXSTA04MP ����������������������������������������������������������� pgs. 4, 14, 15, 19 4 PACK LEVELING FEET 41568 PACKAGING DIMS: 11.25" L x 6.75" W x 3.5" H WEIGHT: 5.43 lbs
DXMF3603WSH ����������������������������������������������������������� pgs. 26, 27, 29 ADJUSTABLE LEG WELDING SAWHORSE 92799 PACKAGING DIMS: 36" L x 3" W x 6.5" H WEIGHT: 27 lbs
DXSTA10MPB ��������������������������������������������������������� pgs. 5, 14, 15, 20 MAGNETIC PARTS BUCKET 41564 PACKAGING DIMS: 7.3" L x 5.2" W x 3.6" H WEIGHT: 0.65 lbs
DXMF4618WT �������������������������������������������������������������� pgs. 26, 27, 29 ADJUSTABLE WELDING TABLE 92796 PACKAGING DIMS: 46" L x 18" W x 8" H WEIGHT: 45 lbs
DXSTA151PS ������������������������������������������������������ pgs. 4, 5, 14, 15, 21 15 AMP POWER STATION WITH GFCI AND DETACHABLE WORK LIGHT 41594 PACKAGING DIMS: 17.5" L x 7.4" W x 9" H WEIGHT: 9.95 lbs DXSTA26CLB ������������������������������������������������������������� pgs. 4, 14, 15, 18 2 PIECE 6-INCH CANTILEVER BRACKETS 41559 PACKAGING DIMS: 45.07" L x 19.48" W x 1.97" H WEIGHT: 30.86 lbs
DXSTA500LM ����������������������������������������������������� pgs. 5, 6, 14, 15, 21
3 PACK MOTION SENSOR LIGHT KIT 41553 PACKAGING DIMS: 16.25" L x 4.75" W x 11.5" H WEIGHT: 2.54 lbs
INDEX
2 PIECE STEEL PEGBOARD KIT for DXST4500 Industrial Rack 41557 PACKAGING DIMS: 48.03" L x 18.9" W x 3.54" H WEIGHT: 28.46 lbs
WELDING GLOVES ������������������������������������������������������� pgs. 26, 27, 28 GLOVE MODEL SIZES AND PART NUMBERS DXSTF01011 DXSTF01052 DXSTF02051 DXSTF03051 DXSTF04051 S
DXMF01011SM
DXMF01052SM
DXMF02051SM
DXMF03051SM
DXMF04051SM
M
DXMF01011MD
DXMF01052MD
DXMF02051MD
DXMF03051MD
DXMF04051MD
L
DXMF01011LG
DXMF01052LG
DXMF02051LG
DXMF03051LG
DXMF04051LG
XL
DXMF01011XL
DXMF01052XL
DXMF02051XL
DXMF03051XL
DXMF04051XL
2XL DXMF01012XL
DXMF010521XL DXMF020512XL DXMF030512XL DXMF040512XL
3XL DXMF01013XL
DXMF010523XL DXMF020513XL DXMF030513XL DXMF040513XL
DXSTACLR �������������������������������������������������������������������pgs. 14, 15, 19 3 PIECE WALL MOUNT CANTILEVER RACK 41589 PACKAGING DIMS: 36.5" L x 12.25" W x 3" H WEIGHT: 23.05 lbs DXSTACM ���������������������������������������������������������� pgs. 4, 14, 15, 20, 22 2 PIECE CORD MINDERS 41600 PACKAGING DIMS: 7" L x 6.75" W x 3.5" H WEIGHT: 2.78 lbs
SHOP SEATING DXSTAH025 ������������������������������������������������������������ pgs. 5, 22, 23, 24 ADJUSTABLE SHOP STOOL WITH CASTERS 41562 PACKAGING DIMS: 16.93" L x 16.93" W x 15.16" H WEIGHT: 23.15 lbs DXSTFB048 ������������������������������������������������������������ pgs. 5, 22, 23, 25 GARAGE BENCH 41563 PACKAGING DIMS: 52.36" L x 20.87" W x 6.69" H WEIGHT: 59.52 lbs
OFFICIALLY LICENSED BY
31
Copyright © 2020 DEWALT. DEWALT® and the DEWALT Logo are trademarks of the DEWALT Industrial Tool Co., or an affiliate thereof and are used under license. The yellow/black color scheme is a trademark for DEWALT power tools & accessories.
JS PRODUCTS • 6445 MONTESSOURI STREET • LAS VEGAS, NV 89113 CUSTOMER SERVICE: 855.558.2422 • FAX: 775.808.8773 WWW.DEWALTSHELVING.COM • WWW.DEWALTWELDING.COM V12