USA MADE
HEAD PROTECTION
One Nation Eyewear
COOLERZ®
®
Head Protection Hard Hats..................................................................... 4-8 Special Use.......................................................................8 Replacement Suspensions | Brow Pads.............................9 Bump Caps............................................................... 10-11 Color Reference Chart.....................................................12 Chain Saw Safety System | Winter Liners.......................13 New Hire Kits............................................................ 14-15 Accessories.............................................................. 16-17
Face Protection Brackets & Headgear................................................ 18-19 Windows........................................................................20 Coolerz ..........................................................................21 ®
Eye Protection Eye Protection........................................................... 22-36 Goggles..........................................................................34 Accessories.............................................................. 35-36
Hearing Protection Ear Plugs........................................................................37 Ear Muffs........................................................................38
Girl Power at Work Girl Power at Work.................................................... 39-43
Aware Wear Aware Wear Reference Guide & Index................... 44-45 Class 2 Vests | Best Sellers....................................... 46-47 Class 2 Vests | Break-Away....................................... 48-49 Class 2 Vests | Multi-Pocket...................................... 50-54 Class 2 Vests | 3M Scotchlite ........................................55 Class 2 Vests | Flame Resistant & Retardant............. 56-57 Class 3 Vests............................................................ 58-61 Non ANSI Vests......................................................... 62-64 Public Safety Vests..........................................................65 Short Sleeve T-Shirts................................................ 66-68 Long Sleeve T-Shirts & Polo Shirt.............................. 69-71 Work Pants.....................................................................71 Cold Weather Wear................................................... 72-79 Rainwear.................................................................. 80-82 Hi-Viz Accessories..........................................................83 Aware Wear | Logo Leader..............................................84 TM
Gloves Gloves...................................................................... 85-91
First Aid Kits First Aid Kits............................................................. 92-94 HotHands ......................................................................95 ®
Safety Apparel Coveralls, Non ANSI Rainwear & Back Supports........ 96-97 Work Zone Accessories...................................................98
3M Products TM
3M Respirators..................................................... 99-102 TM
Custom Printing Services Services & Guidelines...................................................103
3
Head- PAmericana rotection - Americana Vent 4 Point Nylon Ribbon Suspension Head Protection ®
®
ISO 9001:2008
4 Point Nylon Ribbon Suspension
Cap • 4-Point woven nylon suspension • Features a short peak and low profile • Functional rain trough • Accessory slots accommodate a wide variety of eye, face and hearing products • Accommodates chin strap • Goggle retaining slots on suspension • Moisture wicking brow pad is removable, washable and replaceable • Certified when headband is installed in reverse position • Meets the low temperature (LT) option of the Z89.1 Standard • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.5 - 8 • Slide-Lock Cap weight: 12.38 oz. • Mega Ratchet Cap weight: 13.26 oz. • SEI Certified • 12 per carton
AMERICANA CAP SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK
MEGA RATCHET
White
19761
19361
Yellow
19762
19362
Orange
19763
19363
Red
19764
19364
Blue
19766
19366
Gray
19767
19367
Green
19768
19368
Black
19771
19371
Beige
-
19464
Pink
19375
19775
Hi-Viz Lime
19760
19360
Hi-Viz Orange
19765
19365
Hi-Viz Pink
19769
19369
Hi-Viz Yellow
19774
19374
I-575 Replacement Suspension
19780
-
I-575R Replacement Suspension
-
19380
19146
19146
304 Replacement Brow Pad
STOCKED IN 14 COLORS: Call for additional color choices.
Full Brim • 4-Point woven nylon suspension • Accommodates chin strap • Goggle retaining slots on suspension • Moisture wicking brow pad is removable, washable and replaceable • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.5 - 8 • Meets the low temperature (LT) option of the Z89.1 Standard • Slide-Lock Hat weight: 14.53 oz. • Mega Ratchet Hat weight: 15.13 oz. • SEI Certified • 12 per carton
AMERICANA FULL BRIM SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK
MEGA RATCHET
White
19201
19221
Yellow
19202
19222
Orange
19203
19223
Red
19204
19224
Blue
19206
19226
Hi-Viz Lime
19200
19220
Hi-Viz Orange
19205
19225
Hi-Viz Pink
19210
19199
Hi-Viz Yellow
19208
19228
I-505 Replacement Suspension
19211
-
I-505R Replacement Suspension
-
19428
19146
19146
304 Replacement Brow Pad
STOCKED IN 9 COLORS: Call for additional color choices. AMERICANA CAP GIRL POWER AT WORK ®
DESCRIPTION 6 pack Retail Display Hi-Viz Pink
4
Meets ANSI/ISEA Z89.1, Type 1, Class C, E and G requirements ® Americana and Liberty helmet designs are registered trademarks of ERB
®
MEGA RATCHET 43000
Americana Vent - Head Protection
ISO 9001:2008
®
4 Point Nylon Ribbon Suspension AMERICANA VENT CAP SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK
MEGA RATCHET
White
19251
19451
Yellow
19252
19452
Red
19254
19454
Blue
19256
19456
Gray
19257
19457
Hi-Viz Lime
19250
19450
Hi-Viz Orange
19255
19455
-
19453
Hi-Viz Pink I-675 Replacement Suspension
19260
-
I-675R Replacement Suspension
-
19460
19146
19146
304 Replacement Brow Pad
STOCKED IN 8 COLORS: Call for additional color choices.
Vented Cap • 4-Point woven nylon suspension • Features a short peak and low profile • Vents on top of hard hat increase air circulation, keeping head cool and comfortable • Accessory slots accommodate a wide variety of eye, face and hearing products • Accommodates chin strap • Moisture wicking brow pad is removable, washable and replaceable • Certified when headband is installed in reverse position • Meets the low temperature (LT) option of the Z89.1 Standard • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.5 – 8 • Slide-Lock Cap weight: 13 oz. • Mega Ratchet Cap weight: 14 oz. • SEI Certified • 12 per carton
Natural Convection Airflow
AMERICANA VENT FULL BRIM SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK
MEGA RATCHET
White
19331
19431
Yellow
19332
19432
Red
19334
19434
Blue
19336
19436
Gray
19537
19637
Hi-Viz Lime
19330
19430
Hi-Viz Orange
19337
19437
I-505 Replacement Suspension
19211
-
I-505R Replacement Suspension
-
19428
19146
19146
304 Replacement Brow Pad
STOCKED IN 7 COLORS: Call for additional color choices.
Vented Full Brim • 4-Point woven nylon suspension • Accommodates chin strap • Vents on top of hard hat increase air circulation, keeping head cool and comfortable • Goggle retaining slots on suspension • Moisture wicking brow pad is removable, washable and replaceable • Meets the low temperature (LT) option of the Z89.1 Standard • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.5 - 8 • Slide-Lock Hat weight: 14.60 oz. • Mega Ratchet Hat weight: 15.34 oz. • SEI Certified • 12 per carton
Meets ANSI/ISEA Z89.1, Type 1, Class C requirements ® Americana and Liberty helmet designs are registered trademarks of ERB
5
Head Protection - Omega II
®
ISO 9001:2008
6 Point Nylon Ribbon Suspension
Cap
OMEGA II CAP STYLE SAFETY HELMET ®
• 6-Point woven nylon suspension • Accessory slots accommodate a wide variety of eye, face and hearing products • Accommodates chin strap • Certified when headband is installed in reverse position • Meets the low temperature (LT) option of the Z89.1 Standard • Moisture wicking brow pad is removable, washable and replaceable • Goggle retaining slots on suspension • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.5 - 8 • Slide-Lock Cap weight: 12.76 oz. • Mega Ratchet Cap weight: 13.50 oz. • SEI Certified • 12 per carton
DESCRIPTION
SLIDE-LOCK
MEGA RATCHET
White
19131
19951
Yellow
19132
19952
Orange
19133
19953
Red
19134
19954
Blue
19136
19956
Gray
19137
19957
Green
19138
19958
Black
19139
19949
Beige
19144
19959
Gold
19300
19992
Dark Blue
19301
19993
Purple
19128
19988
Silver
19305
19994
Brown
19310
19910
Hi-Viz Lime
19130
19990
Hi-Viz Orange
19135
19955
Hi-Viz Pink
19129
19989
Hi-Viz Yellow
19148
19948
White with American Flag*
19140
19950
Glow in the Dark (see page 8)
19302
19902
I-85 Replacement Suspension
I-85R Replacement Suspension
19141 ® -
19945
304 Replacement Brow Pad
19146
19146
-
Head Protection - ANSI Type 2 | Glo-Mega Omega II *Omega II Flag – White Cap with American Flag printed on both sides
®
®
Full Brim • 6-Point woven nylon suspension • Accommodates chin strap • Goggle retaining slots on suspension • Moisture wicking brow pad is removable, washable and replaceable • Meets the low temperature (LT) option of the Z89.1 Standard • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.5 - 8 • Slide-Lock Hat weight: 16.4 oz. • Mega Ratchet Hat weight: 17.30 oz. • SEI Certified • 12 per carton
STOCKED IN 16 COLORS: Call for additional color choices.
OMEGA II FULL BRIM SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK
MEGA RATCHET
White
19501
19911
Yellow
19502
19912
Orange
19503
19913
Red
19504
19914
Blue
19506
19916
Hi-Viz Lime
19510
19920
Hi-Viz Orange
19500
19923
Hi-Viz Yellow
19521
19921
Glow in the Dark (see page 8)
19522
19922
I-85 Replacement Suspension
19141
-
I-85R Replacement Suspension
-
19945
19146
19146
304 Replacement Brow Pad
STOCKED IN 8 COLORS: Call for additional color choices.
6
Meets ANSI/ISEA Z89.1, Type 1, Class C, E and G requirements
6 Point Nylon Ribbon Suspension Omega II - Head Protection Liberty - Head Protection ISO 9001:2008 ®
®
4 Point Plastic Suspension
Cap
LIBERTY CAP STYLE SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK
MEGA RATCHET
White
19821
19321
Yellow
19822
19322
Orange
19823
19323
Red
19824
19324
Blue
19826
19326
Gray
19827
19327
Green
19828
19328
Hi-Viz Lime
19820
19320
Hi-Viz Orange
19835
19335
I-285 Replacement Suspension
19814
-
I-285R Replacement Suspension
-
19314
19124
19124
305 Replacement Brow Pad
• 4-Point injection-molded, polyethylene suspension • Features a short peak and low profile • Functional rain trough • Accessory slots accommodate a wide variety of eye, face and hearing products • Accommodates chin strap • Moisture wicking brow pad is removable, washable and replaceable • Goggle retaining slots on Slide-Lock suspension • Certified when headband is installed in reverse position • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.625 - 8 • Slide-Lock Cap weight: 11.75 oz. • Mega Ratchet Cap weight: 12.55 oz. • SEI Certified • 12 per carton
STOCKED IN 9 COLORS: Call for additional color choices.
Meets ANSI/ISEA Z89.1, Type 1, Class C, E and G requirements
Type 2
ANSI Type 2 - Head Protection
4 Point Nylon Ribbon Suspension ANSI Type 2 head protection is designed to protect wearer from lateral blows to front, back and sides in addition to top of head.
AMERICANA 360 FULL BRIM SAFETY HELMET ®
DESCRIPTION
MEGA RATCHET
White
20004
Yellow
20005
Blue
20006
I-575R Replacement Suspension
19380
304 Replacement Brow Pad
19146
STOCKED IN 3 COLORS.
Americana 360 Full Brim ®
• 4-Point woven nylon suspension • Accommodates chin strap • Goggle retaining slots on suspension • Moisture wicking brow pad is removable, washable and replaceable • Mega Ratchet size adjustment for head sizes 6.5 - 8 • Meets the low temperature (LT) option of the Z89.1 Standard • Mega Ratchet Hat weight: 16.9 oz. • SEI Certified • 12 per carton
Omega 360 Cap ®
OMEGA 360 CAP SAFETY HELMET ®
DESCRIPTION
MEGA RATCHET
White
20001
Yellow
20002
Blue
20003
I-675R Replacement Suspension
19460
304 Replacement Brow Pad
19146
STOCKED IN 3 COLORS.
• 4-Point woven nylon suspension • Accessory slots accommodate a wide variety of eye, face and hearing products • Accommodates chin strap • Certified when headband is installed in reverse position • Meets the low temperature (LT) option of the Z89.1 Standard • Moisture wicking brow pad is removable, washable and replaceable • Goggle retaining slots on suspension • Mega Ratchet size adjustment for • Head sizes 6.5 - 8 • Mega Ratchet Cap weight: 16.7 oz. • SEI Certified • 12 per carton
Meets ANSI/ISEA Z89.1, Type 2, Class C, E and G requirements
7
Head Protection - Special Use
ISO 9001:2008
Americana Wildlands
®
an
Fla
me
t
Meets NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, 2011 Edition and ANSI/ISEA Z89.1-2009 Type 1, Class C, E, and G requirements.
R e sis
t
• 4-Point woven nylon suspension • Slide-Lock or Mega Ratchet size adjustment for head sizes 6.5 - 8 • Moisture wicking brow pad is removable, washable and replaceable • SEI Certified to the NFPA 1977 Standard and ANSI/ISEA Z89.1 • Three goggle retaining clips on shell • Four fluorescent yellow retroreflective strips attached to shell • Hook tape for affixing neck shroud • Glare reducing feature under front brim • Includes Nomex /Kevlar Chin Strap • Chinstrap has metal postman’s slide fastener and quick release buckle • Slide-Lock Hat weight: 18.5 oz. • Mega Ratchet Hat weight: 19.3 oz. • 1 per carton ®
AMERICANA WILDLANDS FULL BRIM SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK MEGA RATCHET
White
19351
19751
Yellow
19352
19752
Red
-
19850
Black
-
19851
I-505 Replacement Suspension
19211
-
I-505R Replacement Suspension
-
19428
19146
19146
304 Replacement Brow Pad
®
Available Colors
Provides protection in environments with higher ambient temperatures or radiant heat, such as in outdoor fire fighting. Full Brim style shields from sun and rain.
See page 17 for chinstrap details
Americana Heat an
Fla
me
t
®
R e sis
t
• 4-Point woven nylon suspension • Ideal for workers requiring crown impact protection in environments where exposed to elevated temperatures or radiant heat • Same shell and suspension used in the Americana Wildlands helmet that is designed to meet NFPA 1977 requirements • Slide-lock or Mega Ratchet adjusts from head-sizes 6.5 - 8 • Accommodates chin strap • Suitable for utilities, foundries, steel mills and welding • Moisture wicking brow pad is removable, washable and replaceable • Slide-Lock Hat weight: under 17.2 oz. • Mega Ratchet Hat weight: under 18 oz. • SEI Certified • 12 per carton ®
AMERICANA HEAT FULL BRIM SAFETY HELMET ®
DESCRIPTION
SLIDE-LOCK MEGA RATCHET
White
19341
19741
Yellow
19342
19742
I-505 Replacement Suspension
19211
-
I-505R Replacement Suspension
-
19428
19146
19146
304 Replacement Brow Pad
Provides protection in environments with higher ambient temperatures or radiant heat, such as in steel mills and foundries. Full Brim style shields from sun and rain.
Glo-Mega Omega II ®
®
Glow-in-the-Dark head protection great for the mining industry, ship yards, underground utilities, and night highway construction. Q: What causes the Glo-Mega to glow? A: The glow is caused by photoluminescence, commonly referred to as glow-in-the-dark. The materials used in the Glo-Mega are nothing at all like the glow-in-the-dark materials of several years ago. They charge quickly and glow much brighter and much longer than the glow-in-the-dark items you may remember having as a child. Q: How long does it take to charge the Glo-Mega? A: Charging for 10 to 20 minutes in sunlight would be excellent to produce a strong long lasting glow. A half hour in bright fluorescent light would be very good. Even 20 minutes near a 40 watt incandescent bulb will generate a significant glow.
Cap Full Brim
Q: How brightly does the Glo-Mega glow? A: In intermediate levels of lighting, the Glo-Mega takes on a greenish color as the glow competes with the light from its surroundings. In dark conditions, the Glo-Mega’s glow has been measured at 1220 mcd/m2 immediately after charging and, after ten minutes was still 45 times as bright as required by ASTM 2073 for emergency signage. Q: How long can the glow be seen? A: To eyes accustomed to the dark, the glow can be seen for several days or even weeks after a suitable charge. Q: How does the after-glow of the Glo-Mega fade? A: The fading begins as soon as the source of charging is removed - faster at first, then slowing over a long period of time. For a number of hours, this fading is partially offset by a dramatic increase in the sensitivity of the eye to see light. Q: What is the useful life of the product? A: The Glo-Mega has the normal life span of a molded polyethylene safety helmet. The photo luminescent properties however, should last almost indefinitely.
8
Meets ANSI/ISEA Z89.1, Type 1, Class C, E and G requirements ® Americana and Liberty helmet designs are registered trademarks of ERB
Replacement Suspensions | Brow Pads - Head Protection
ISO 9001:2008
Mega Ratchet
®
The “Secure-Fit” ratchet features an easy turn knob that allows size adjustment from head sizes 6.5 - 8 without removing the helmet. Each turn of the ratchet knob automatically locks with 50 meshing teeth securing the position. The no-slip hold maintains the desired fit even in the most physically active jobs or extreme weather conditions. The hinged ratchet fits low on the nape of the neck and is height-adjustable for a perfect fit. The ratchet mechanism is cushioned with thick sponge padding for long-lasting comfort.
Americana
®
4 Point Nylon Replacement Suspension DESCRIPTION
Easy Turn Knob
Goggle Strap Retaining Slots
ITEM #
I-575R Mega Ratchet
19380
Cap/360 Full Brim
I-505R Mega Ratchet
19428
Full Brim
I-675R Mega Ratchet
19460
Vent Cap Integrated goggle retainer conveniently holds goggles in place.
Easy turn knob adjusts to over 40 different head sizes!
Omega II
®
6 Point Nylon Replacement Suspension DESCRIPTION
ITEM #
I-85R Mega Ratchet
19945
Two Position Hinge
Cushion
Cap/Full Brim
Omega 360
®
4 Point Nylon Replacement Suspension DESCRIPTION
ITEM #
I-675R Mega Ratchet
19460
Cap
®
4 Point Plastic Replacement Suspension ITEM #
I-285R Mega Ratchet
19314
Cap
Omega II
®
6 Point Nylon Replacement Suspension DESCRIPTION
ITEM #
I-85 Slide-Lock
19141
Inner side of ratchet is covered with a foam pad cushion.
®
Liberty DESCRIPTION
The nape section of the Mega Ratchet suspension is attached by two plastic pins which are repositionable to adjust height.
Cap Accessory Slots Accommodates a variety of eye, face and hearing products (cap styles only).
Woven Ribbon
Moisture Wicking Brow Pad
Suspension ribbon is designed using parachute cord technology for excellent shock absorption and break strength.
Removable, washable and replaceable.
Slide-Lock
The Slide-Lock suspension easily adjusts to over 40 different head sizes between sizes 6.5 - 8. The suspension material is specially formulated for pliable comfort and strength as well as to provide a smooth sliding action.
Cap/Full Brim
Americana
®
4 Point Nylon Replacement Suspension DESCRIPTION
ITEM #
I-575 Slide-Lock
19780
Cap
I-505 Slide-Lock
19211
Full Brim
I-675 Slide-Lock
19260
Vent Cap
Liberty
®
See page 7 for image
4 Point Plastic Replacement Suspension DESCRIPTION
ITEM #
I-285 Slide-Lock
19814
Cap
h n olo g y
Te c
Para
Suspension ribbon is designed using parachute cord technology for ch excellent shock ute C ord absorption and break strength, providing superior helmet safety technology for over 40 years.
All replacement suspensions packaged 12 per carton
Moisture Wicking Brow Pad
• Removable • Washable • Replaceable
• Blue nylon tricot on top of polyester foam • 12 per carton
DESCRIPTION
ITEM #
304 compatible with: Americana, Americana Vent, Americana Wildlands, Americana Heat, Americana 360, 19146 Omega II, Omega II 360 305 compatible with: Liberty, 67 Bump Cap, 901 Bump Cap
19124
9
Head Protection - Bump Caps
ISO 9001:2008 Head Protection - Bump Caps | Bump Caps Inserts
4 Point Plastic Suspension
67 Bump Cap
• Perforated sides allow cross ventilation for maximum air circulation • Moisture wicking brow pad is removable, washable and replaceable • “Pin-Lock” sizing adjusts from head sizes 6.5 - 7.75 • Designed for use in industries such as automotive, pest control, meat packing, food processing and assembly facilities • The Bump Cap is ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets • Cap weight: 7.34 oz. • Not a hard hat • 12 per carton
DESCRIPTION
SLIDE-LOCK
White
19111
Yellow
19112
Orange
19113
Red
19114
Blue
19116
Green
19118
Black
19119
Dark Blue
19161
Gold
19901
Hi-Viz Lime
19125
Hi-Viz Orange
19122
Hi-Viz Pink
19115
Hi-Viz Yellow
19117
Beige
19126
Gray
19127
I-95 Replacement Suspension
19120
305 Replacement Brow Pad
19124
STOCKED IN 15 COLORS: Call for additional color choices.
901 Bump Cap Flat front for attaching personal gear such as lights or badges
!
• Moisture wicking brow pad is removable, washable and replaceable • “Pin-Lock” sizing adjusts from head sizes 6.5 - 7.75 • Designed for use in industries such as automotive, pest control, meat packing, food processing and assembly facilities • Rugged alternative to the 67 Bump Cap • The Bump Cap is ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets • Cap weight: 8.30 oz. • Not a hard hat • 12 per carton
DESCRIPTION
ITEM #
White
19020
Black
19019
I-95 Replacement Suspension
19120
305 Replacement Brow Pad
19124
STOCKED IN 2 COLORS: Call for additional color choices.
Caution: Bump caps are not designed to protect against impact from falling or glancing objects. Does not meet ANSI/ISEA Z89.1
Bump Cap Replacement Suspension 4 Point Plastic Pin-Lock Suspension
67 BUMP / 901 BUMP CAP The pin lock suspension securely fastens in place from head size 6.5 - 7.75. This design functions similarly to some streetwear baseball caps. The moisture wicking brow pad is removable, washable and replaceable.
10
DESCRIPTION
ITEM #
I-95 Replacement Suspension
19120
305 Replaceable Brow Pad information on Page 9
Bump Cap Inserts - Head Protection
ISO 9001:2008
Create a Cap
®
Bump Cap Insert
DESCRIPTION
ITEM #
Insert with Foam Pad
19402
Insert without Foam Pad
19404
• Insert fits most low profile, 6 panel ball caps • HDPE shell • Ventilation eyelets promote air circulation to keep wearer cool • Insert available with or without attached foam • Fits head sizes 6.75 - 7.75 • Insert weight: 3.744 oz. • Not a hard hat • Does not meet ANSI/ISEA Z89.1 • Ponytail compatible • 24 per carton
H64 BALL CAP (sold separately) Black
29040
Burgundy
29042
Camo
28840
Hunter Green
29041
Light Blue
29059
Navy
29043
Pink
29058
Red
29044
White
29056
Use Your Own Cap To Create A Bump Cap!
Custom logoing of H64 ball caps available Call for details: 855-621-9100
NEW!
912 Bump Cap Insert DESCRIPTION
ITEM #
Black
19405
• ABS Shell • Lined with EVA soft pad • Protects against lacerations, minor bumps and bruises in areas that do not require certified safety helmets • Fits head sizes 6.75 - 7.375 • Insert weight: 4.077 oz. • Cap not included • Not a hard hat • Does not meet ANSI/ISEA Z89.1 • 24 Per carton
913 Ball Cap Bump DESCRIPTION
ITEM #
Dark Blue
19400
!
• 100% cotton ball cap with padded insert • Protects against lacerations, minor bumps and bruises in areas that do not require certified safety helmets • Hook & loop size adjustment • Vent holes for breathability • 913 shell not interchangeable with any other ball cap • Embroidery on ball cap available • Cap weight: 5.7 oz. • Not a hard hat • Does not meet ANSI/ISEA Z89.1 • 12 Per carton
Caution: Bump caps are not designed to protect against impact from falling or glancing objects. Does not meet ANSI/ISEA Z89.1
11
Head Protection - Color Reference Chart CUSTOM PRINTED HEAD PROTECTION
LOGO. LEADER. is ERB Safety’s in-house product customization service which includes pad print, screen print, vinyl heat transfer as well as other custom services. We maximize logo sizing to best show your logo on each product. All hard hats can be printed on the front, sides and/or back with up to four spot colors.
CALL TO ORDER! 855-621-9100 AMERICANA AMERICANA AMERICANA AMERICANA CAP FULL BRIM VENT CAP VENT FULL BRIM page 4 page 4 page 5 page 5
OMEGA II CAP page 6
OMEGA II FULL BRIM
LIBERTY CAP
page 6
page 7
AMERICANA WILDLANDS & HEAT page 8
67 BUMP CAP
901 BUMP CAP
page 10
page 10
A wide range of quality Made in USA Hard Hats and Bump Caps to meet wearers’ needs.
BEIGE BLACK BLUE
If we do not stock the hat style in the color needed, we manufacture custom color products in-house (see left).
BROWN DARK BLUE GRAY GREEN GOLD
Custom Colors Available. Minimum run size: 288 for Cap style, 218 for Full Brim style.
HI-VIZ LIME HI-VIZ ORANGE HI-VIZ PINK HI-VIZ YELLOW
CALL FOR DETAILS! 800-800-6522
ORANGE PINK PURPLE RED WHITE SILVER YELLOW GLO-MEGA
Colors marked
12
✱ are not stocked, but available within 10 business days of confirmed purchase order.
Bump Caps | Bump Caps Inserts - HSystem ead Protection Chain Saw Safety | Winter Liners - Head Protection
Winter Liners
Some models are treated with flame resistant finish that holds up to 5 washings. FS1 and FS3 models contain durable, fire resistant material. Hooded styles are equipped with adjustable chin straps and safety helmet attachment straps.
2009F
4000F
2500
7000F
• Lightweight 100% cotton • No inner lining
• Durable 100% cotton twill shell • Fleece lining
• Quilted nylon tricot outer shell • Fleece lining
• 100% cotton twill outer shell • Synthetic sheepskin lining • Extended nape for extra neck protection
8000F
9000F
• Knitted flame resistant polyester and spandex • Wear around the edge of safety helmet to prevent wind from tunneling under the helmet • Fits all ERB Safety caps and Americana Full Brim
• 100% Polyester knit • Elastic for snug fit • Prevents wind from getting under the helmet and protects face and neck • Fits all ERB Safety cap style hard hats
®
2100
FS3*
FS1
• 100% cotton twill shell • Non-durable FR • Heavy sherpa lining • Extra long nape for additional protection
• 100% cotton with 100% cotton felt liner • Durable fire resistant material meets ASTM F1506 Standard • Equipped with safety helmet attachment straps
• 100% cotton with 100% cotton felt liner • Durable fire resistant material meets ASTM F1506 Standard • Equipped with adjustable chin strap and helmet straps
DESCRIPTION
ITEM #
2009F
19559
2500
19545
4000F
19540
7000F
19561
8000F
19562
9000F
19558
2100
19547
FS1
28853
FS3*
28854
12 per carton *6 per carton
Chain Saw Safety Headgear System Omega II Mega Ratchet
Sound Shield Ear Muff
Steel Mesh Face Screen
Anti-Fog Goggle
Visor Carrier Attachment
Chin Strap
®
®
• Omega II Mega Ratchet Safety Helmet (Orange) meets ANSI/ISEA Z89.1, Type 1, Class C, E and G requirements • 4000 Steel Mesh Face Screen provides protection from flying debris and meets the requirements of ANSI Z87-S 1992. Epoxy coated for glare and corrosion resistance • 5000 Visor Carrier Attachment has resilient cam-lock feature that holds the face screen in place - 3 positional • 5001 Nylon Face Shield Carrier with hard hat slot attachments, adjustable tension, accommodates 12” or 15.5” shields up to .060” thick. Dielectric • 2800 Sound Shield Ear Muff Attachment fits into accessory slots of helmet and meets ANSI S3.19 requirements. Dielectric. NRR 28dB • 116 Perforated Anti-Fog Goggle has a polycarbonate lens and flexible vinyl frame for secure fit. Meets the requirements of ANSI Z87.1 • 1116 Chin Strap - made of durable elastic that provides comfort and control • 1 per carton ®
®
ASSEMBLED KIT DESCRIPTION
ITEM #
Chain Saw Safety Kit
14371
REPLACEMENT KIT PARTS DESCRIPTION
ITEM #
4000 Steel Mesh Screen
15157
5000 - Visor Carrier
15156
5001 - Carrier with Muff Bracket
15162
5050 - Ear Muff Mounting Bracket
15158
2800 Ear Muff
14230
116 Perforated Goggle / Anti-Fog
15143
1116 Chin Strap
19182
Omega II Mega Ratchet - Orange ®
®
19953
13
Head Protection - New Hire Kits AFB1 FULL BRIM STYLE
ISO 9001:2008
L1 CAP STYLE
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
AFB1, Clear Lens
18560
L1, Clear Lens
18531
AFB1, Gray Lens
18557
L1, Gray Lens
18532
Americana White Full Brim Mega Ratchet
Liberty White Standard
Leather Palm
Leather Palm
®
®
®
Economy Boas (Clear or Gray Lens)
Boas (Clear or Gray Lens)
ERB-03C Disposable
ERB-04C Reusable
®
NEW HIRE KIT ADVANTAGES • Consolidate many SKU’s into one • Neatly shrink wrapped • Easy to distribute • Custom kits available
14
(minimum 12 units)
®
New Hire Kits - Head Protection
ISO 9001:2008
L2 CAP STYLE
L3 CAP STYLE
L4 CAP STYLE
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
L2, Clear Lens
18526
L3, Clear Lens, S362 Large
16531
L4, Clear Lens, S363 X-Large
18450
L2, Gray Lens
18528
L3, Clear Lens, S362 X-Large
16532
L4, Clear Lens, S363 2X
18451
L3, Clear Lens, S362 2X
16533 L4, Gray Lens, S363 X-Large
18452
L3, Gray Lens, S362 Large
16538
L4, Gray Lens, S363 2X
18453
L3, Gray Lens, S362 X-Large
16539
L3, Gray Lens, S362 2X
16540
Liberty White Standard
Liberty White Standard
Liberty White Standard
S18R Non-ANSI
S362 ANSI Class 2
S363 ANSI Class 2
Leather Palm
Leather Palm
N200 Blue Foam (Large)
Boas (Clear or Gray Lens)
Invasion (Clear or Gray Lens)
iProtect (Clear or Gray Lens)
ERB-04C Reusable
ERB-03C Disposable
®
®
ERB-04C Reusable
®
®
®
®
15
Head Protection - Accessories
Head Protection - Accessories
Hard Hat Pencil Clip • Adhesive backed clip holds pencils, pens and carpenter pencils • Imprinting available – Call for quote • 12 per carton DESCRIPTION Red White Blue Yellow Orange
ITEM # 15688 15687 15686 15685 15684
Doo Rags
Carpenter Pencil • 7” medium grade • Imprinting available – Call for quote • 72 per carton DESCRIPTION Hi-Viz Orange Natural White
ITEM # 15672 15670 15671
DESCRIPTION Black Camo Stars & Stripes
• 100% Cotton • Six panel headwrap • One size fits most • Treated for softness • 6 per carton
A110 Hi-Viz Doo Rags
Eyewear Clip
• Adheres to safety helmet with adhesive strip • Can be used to hold pencils, eyewear, ruler, etc. • Imprinting available – Call for quote • 12 per carton DESCRIPTION Black White Yellow Hi-Viz Orange Hi-Viz Pink
ITEM # 15640 15641 15642 15643 15644
• 100% polyester Birdseye mesh knit • Three panel headwrap • One size fits most • 1 per carton DESCRIPTION DOO RAGS
61285
61286
S11 Cloth Neck Shield S6 Sweatband Brow Pad • Highly absorbent cellulose sponge • Elastic headband • Economically priced for single use • Durable enough for reuse • 25 per carton DESCRIPTION S6 Sweatband
ITEM # 10026
S8 Terrycloth Brow Pad • 100% plush absorbent cotton • Universal, fits most hard hat suspensions • Easily attaches to suspension with plastic snaps • Machine washable • 12 per carton DESCRIPTION Terrycloth Brow Pad
ITEM # 10027
• Conveniently loops around helmet suspension with metal grommets • Hangs freely to protect from sun and heat • Made of white 100% cotton fabric • Dimensions: 15” W x 11.5” L • 12 per carton
DESCRIPTION Neck Shield
ITEM # 19280
S268 Mesh Neck Shield • Ultra-lightweight 100% polyester • Provides protection from sun and heat while increasing visibility • Attaches to brim of all ERB cap and full brim style helmets • 3 per carton DESCRIPTION Neck Shield
19281
19282
TM
Hard Hat Liner
A735 Mesh Neck Shield
• 100% polyester with a moisture wicking treatment that allows perspiration to be drawn away from the skin to the outside of the liner for evaporation • Terry cloth sweatband sewn to liner • Lightweight and form fitting • Easily attaches to hard hat suspension • Completely washable • 12 per carton
• Ultra-lightweight 100% polyester • Provides protection from sun and heat while increasing visibility • Attaches to brim of all ERB cap and full brim style helmets • 3 per carton
DESCRIPTION American Flag
16
ITEM # 19705
DESCRIPTION Neck Shield
19283
ITEM # 19700 19702 19703
Accessories - Head Protection
Reflective Hard Hat Strips Provide increased visibility day and night
360° Reflective Strip • 3M self-adhesive silver reflective material • Measurements: 1.125” W x 23” L • Exceeds the minimum reflectivity requirements of the ANSI/ISEA 107 for high-visibility head wear • 1 per package TM
DESCRIPTION
ITEM #
Fluorescent Silver
15969
ANSI Reflective Strips • Self-adhesive Orafol retroreflective material • Measurements: 0.5” W x 22” L • Exceeds the minimum reflectivity requirements of the ANSI/ISEA 107 for high visibility head wear • 7 strips per sheet
Chin Straps • Elastic strap with slider size adjustment • Plastic contoured chin cup slides to offer secure fit and comfortable protection • Attaches to ERB Safety Americana , Liberty , Omega II , Omega II Full Brim, Americana Heat Full Brim and Americana Full Brim hats • 12 per carton ®
®
®
®
®
®
DESCRIPTION
ITEM #
Chin Strap
19182
Chin Strap with Chin Guard
19181
Americana Wildlands Fire Resistant Chin Strap ®
• Flame resistant 0.75” Nomex and Kevlar material • Chinstrap has metal postman’s slide fastener and quick release buckle • Easy to adjust and secure • 1 per carton ®
®
DESCRIPTION
ITEM #
White
15968
Orange
15967
Lime
15966
Prismatic Reflective Stickers • Measurements: 1” W x 4” L • Easy to apply • Fluorescent Lime meets ANSI/ISEA 107 requirements for chromaticity and luminance • 16 strips per sheet
DESCRIPTION
ITEM #
High Heat Chin Strap
19183
Sun Shields For ERB Safety Helmets • Adds additional UV protection • Opaque covering with see through smoke-colored “Lexan” front for overhead visibility • Weighs less than 3 oz. • 12 per carton
DESCRIPTION
ITEM #
Fluorescent Lime
19570
Fluorescent Orange
19572
DESCRIPTION
Fluorescent Silver
19574
Fluorescent Pink
19590
Americana/ Liberty
Assembly on hats available. Call for details.
ITEM # AS5E2
17985
Americana Full Brim AS4E2
17986
Americana Vent Full Brim
AS4E3
17925
Omega II
AS5E
17972
Omega II Full Brim
AS4E
17973
Hard Hat Safety Light • Weighs only 1.6 ounces • Can be seen up to one-half mile • Each light contains 4 Super-Brite LED’s • Three light patterns: Fast flash, pulse flash, and constant • Includes 2 AAA batteries and plastic mounting bracket with 3M adhesive • Printing available, call for quote • 12 per carton TM
DESCRIPTION
ITEM #
Amber
10030
Red
10031
Hat Rack Seat Mount • Fits over vehicle seat • Easy Installation • Easy access to hard hat • Rack is adjustable to accept full brim and cap style hard hats • 12 per carton
DESCRIPTION
ITEM #
Hat Rack
17960
17
Face Protection - Brackets & Headgear
ISO 9001:2008
FITS OMEGA II CAP
FITS ALL ERB CAPS
®
E13 Plastic Face Shield Carrier
E21 Aluminum Face Shield Carrier
• Adjustable tension for raising shield when not in use • Heat resistant • Meets ANSI Z87.1 – Impact when paired with 8150 shield • 6 per carton
DESCRIPTION
ITEM #
E21
15195
• Attaches to helmet with heavy duty rubber cord • Adjustable tension for raising shield when not in use • Superior dielectric qualities • Meets ANSI Z87.1 – Impact and CSA Z94.3 when paired with 8150 shield • 10 per carton
DESCRIPTION
ITEM #
E13
15159
E12 Deluxe
Headgear System
E14 Face Shield / Ear Muff Headgear System
• Push and turn ratchet head sizing adjustment from 6.75 to 8 • 4-position locking shield with adjustable tension • Side knobs increase and decrease tension of shield placement • Shield measures 8” x 12” x .060” • Clear, hard-coated polycarbonate shield provides excellent scratch resistance • Meets ANSI Z87.1 – Impact when paired with 8170 shield • 1 per carton
8170 replacement shield available
DESCRIPTION
ITEM #
Black Ratchet with Polycarbonate Shield
15160
8170 Replacement Shield
15153
• Model 5000 Visor Carrier Attachment has resilient cam-lock feature that holds the shield in place – 3 positional • Model 8150 Clear Polycarbonate Face shield. 8” x 15.5” x .040”. Meets the requirements of ANSI Z87.1 – Impact • Model 2800 Sound Shield Ear Muff Attachment fits into accessory slots of helmet. Meets ANSI S3.19. NRR 28dB • Each of the kit’s components are available individually • Hard hat sold separately • 1 per carton
DESCRIPTION
ITEM #
E14
14373
FITS OMEGA II CAP ®
901 Bump Cap And Visor • Fully assembled with shield attached • E13 Plastic Face Shield Carrier • 8150 - 8” x 15.5” x .040” clear polycarbonate shield • Meets the requirements of ANSI Z87.1 – Impact when shield is paired with visor carrier • 6 per carton
5001 Nylon Face Shield Carrier
• Face shield carrier with hard hat slot attachments • Adjustable tension • Accommodates 12” or 15.5” shields up to .060” thick • Dielectric • Meets ANSI Z87.1 – Impact when paired with 8150 shield • 6 per carton
DESCRIPTION
ITEM #
5001
15162
DESCRIPTION
ITEM #
Black
39019
Proper eye protection must be worn with face shields. Face shields are considered secondary protection only.
18
8150 replacement shield available
Brackets & Headgear - Face Protection
ISO 9001:2008
FITS OMEGA II & AMERICANA FULL BRIMS ®
®
E16 & E16R Plastic Headgear • Adjustable tension for raising shield when not in use • Resilient cam-lock feature holds face shield in place • Superior dielectric qualities • Tension can be adjusted for any fixed or moveable window position • Meets ANSI Z87.1 – Impact when paired with 8150 shield • 1 per carton
DESCRIPTION
ITEM #
Standard Suspension
15180
Ratchet Suspension
15181
316 Replacement Brow Pad
15194
E16R
E16
E18 Nylon Face Shield Carrier • Adjustable tension for raising shield when not in use • Superior dielectric qualities • Meets ANSI Z87.1 – Impact when paired with 8150 shield • 6 per carton
DESCRIPTION
ITEM #
E18
15183
E18 may be used with 4000 Steel Mesh Screen 16” x 6.75” x .011”
Choose from Mega Ratchet or Pin-Lock sizing adjustment ®
FITS AMERICANA FULL BRIM ®
FITS ALL ERB SAFETY CAPS
E15 Plastic Face
E19 Aluminum Face Shield Carrier
Shield Carrier
• Adjustable tension for raising shield when not in use • Superior dielectric qualities • Meets ANSI Z87.1 – Impact and CSA Z94.3 when paired with 8150 shield • 10 per carton
DESCRIPTION
ITEM #
E15
15161
E15 may be used with 4000 Steel Mesh Screen 16” x 6.75” x .011”
• Adjustable tension for raising shield when not in use • Heat resistant • Meets ANSI Z87.1 – Impact when paired with 8150 shield • 6 per carton
DESCRIPTION
ITEM #
E19
15184
E19 may be used with 4000 Steel Mesh Screen 16” x 6.75” x .011”
FITS AMERICANA & LIBERTY CAPS ®
®
E17 Plastic Accessory Slot Face Shield Carrier • Adjustable tension for raising shield when not in use • Designed to fit into safety helmet accessory slots • Superior dielectric qualities • Adjusts for ease of window movement • Meets ANSI Z87.1 – Impact when paired with 8150 shield • 1 per carton
E20 Aluminum/ABS Face Shield Carrier DESCRIPTION
ITEM #
E17
15182
DESCRIPTION
ITEM #
E20
15185
• ABS frame securely fits around helmet bill • Durable aluminum carrier • Meets ANSI Z87.1 – Impact when paired with 8150 shield • 6 per carton
Proper eye protection must be worn with face shields. Face shields are considered secondary protection only.
19
Face Protection - Windows
ISO 9001:2008
Face shield windows ship flat in protective film
Face shield windows ship flat in protective film
Face shield windows ship flat in protective film
8150 Clear Polycarbonate
8160 Clear PETG
8167 Clear PETG Banded
Size: 7.75” x 15.5” x .040”
Size: 7.75” x 15.5” x .040”
Size: 9” x 15.5” x .040”
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
8150 - 20 per carton
15151
8160 - 20 per carton
15186
8167 - 10 per carton
15191
8160B - 100 per carton
15187
8167B - 100 per carton
15192
8167 shield does not fit the E20 Carrier
Face shield windows ship flat in protective film
Face shield windows ship flat in protective film
8168 Shade 5 Polycarbonate
8166 Dark Green PETG
4000 Steel Mesh Screen
8191 Steel Mesh Screen
Size: 7.75” x 15.5” x .040”
Size: 7.75” x 15.5” x .040”
Size: 6.75” x 16” x .0111”
Size: 9.5” x 15.5”
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
8168 - 20 per carton
15193
8166 - 20 per carton
15190
4000 - 1 per carton
15157
8191 - 1 per carton
15196
No IR or UV inhibitor Visor Carrier/Shield Compatibility
8170 Molded Clear Polycarbonate Size: 8” x 12” x .060”
Style
Item #
8150
15151
8160
15186
8160B
15187
8166
15190
8167
15191
8167B
15192
8168
15193
8170
15153
DESCRIPTION
ITEM #
8191
15196
8170 - 1 per carton
15153
4000
15157
For use with E12 Deluxe Headgear
Polycarbonate – Heat deflection PETG – General Grinding Polycarbonate Shade 5 – Welding Shade 5
20
E12
E13
E14
E15
E16 & E16R
E17
E18
E19
Steel Mesh Screen – Wood Chipping and Tree Cutting All Headgear, Carriers and Shields are sold separately All ERB Polycarbonate shields provide 99% UV protection
E20
E21
5000
Cooling Products - COOLERZ
BEAT HEAT THE
®
RETAIL READY
ADVANCED EVAPORATIVE COOLING TECHNOLOGY with Hyperkewl
TM
Coolerz Vest, Crown Cooler and Neck Shield use an advanced evaporative cooling system with a water management system to maximize cooling, while minimizing moisture transfer to the wearer. ®
• Enhanced cooling capacity
C420 Neck Shield
• Managed and directional evaporative
cooling release
• Adjustable hook and loop
• Cools longer than other evaporative systems
attaches to hard hat suspension
• Reduces wetness to wearer
• 6 pack
• Water repellent nylon inner
DESCRIPTION
ITEM #
• Quilted nylon outer
C420 Neck Shield
21563
Coolerz with Hyperkewl products utilize a unique polymer chemistry to achieve rapid absorption and stable water storage. The chemical formulation creates enhanced evaporation and longevity. Users can expect the evaporative cooling fabric to provide temperatures that are up to 15 - 20 degrees (F) cooler than the ambient temperature. The exact temperature difference will depend on humidity, exposure to airflow and other environmental conditions. TM
®
C400 Vest Hard Hats Sold Separately
• Zip front closure • Stretchable polyester side panels • Vest sizes run small
C421 Crown Cooler
Easy to use. Simply submerge in water for 1- 2 minutes, then gently remove excess water. Garments will remain hydrated for several hours and can be rehydrated as needed.
• 1 each
• Adjustable hook and loop
attaches to hard hat suspension • 6 pack
SIZE
ITEM #
MD
21570
LG
21571
XL
21572
DESCRIPTION
ITEM #
2X
21573
C421 Crown Cooler
21564
3X
21574
4X
21575
5X
21576
PVA EVAPORATIVE COOLING TECHNOLOGY • Quickly cools
when immersed in water
C301 Neck Bandana • 33” x 2.25” with tapered ends
• Snap to activate • Inexpensive • Easy to recharge
®
• PVA products packed
10 per carton
C302 Doo Rag • Triangular: 36” x 23.5” x 23.5”
Perfect for:
C300 Towel • Comes in a convenient,
reusable carrying case • 25.5” x 17” DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
C301 Neck Bandana
21561
C302 Doo Rag
21562
C300 Towel
21560
• Construction • Landscaping • Biking • Outdoor Events • Recreation • Camping • Workouts / Training or Any Hot Environment! 21
Eye Protection - ONE NATION
D I S P L A Y
9001:2008 Eye Protection - ONEISONATION
P R O G R A M ONE NATION Display Program Safety Eyewear Styles Display With Eyewear
Item # 75710
NAME
DESCRIPTION
CONTRA CONTRA BOAS XTREME COMMANDOS EXILE AMMO SPORT TX3 OUTRIDE LIVE FREE BREAKOUT
BLACK FRAME | BLUE MIRROR LENSES BLACK FRAME | AUSSIE GRAY LENSES BLACK FRAME | GRAY LENSES BLACK FRAME | SHARPSHOOTER LENSES TM
GRAY FRAME | BLUE MIRROR LENSES BLACK FRAME | RED MIRROR LENSES BLACK FRAME | SILVER MIRROR LENSES BLACK FRAME | BLUE MIRROR LENSES CAMO FRAME | AUSSIE GRAY LENSES BLACK FRAME | RED MIRROR LENSES
DISPLAY FEATURES: • 1 DISPLAY WITH MIRROR, SMALL FOOTPRINT • 6 0 SAFETY SUNGLASS UNITS (6 UNITS PER STYLE) • R EFILLS SOLD IN 12 UNITS PER CARTON • A NSI Z87.1 - IMPACT • I NDIVIDUAL GLASSES PACKED IN RESEALABLE ONE NATION POLYBAG, PERFECT FOR MULTI-DISPLAY USE • A LL GLASSES TAGGED WITH MSRP
®
RETAIL READY ACCESSORIES +
Z87
NEW!
ON NA TI ONEEY E W E AetyR
WIREDOG EYEWEAR RETAINER TM
by ERB
Saf
• Fits most ONE NATION Eyewear • Lightweight • Fits most head sizes • Retains shape • Quick release if caught or snagged • 12 per carton ®
DESCRIPTION
ITEM #
Retainer without custom display hook 15750 Retainer with custom display hook* 15753
CUSTOM ONE NATION DISPLAY HOOK* • Required to hang Wiredog retainer on ONE NATION Eyewear Display • Holds 12 units TM
®
(Shown on display upper left)
*Only fits ONE NATION
®
22
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
Display
ONE NATION - Eye Protection ISO 9001:2008
ONE NATION - Eye Protection
RETAIL READY
+
Z87
IO N AT R E N W E A ty O N E Y EER B Sa fe by
FRAME/TEMPLES LENS
ITEM#
Camo
Aussie Gray, Anti-fog
18042
Camo
Sharpshooter* Lens
18049
LIVE FREE
®
• Patriotic camo safety glases • Permanent foam cushion on frame interior • 8 base lens curve • Stainless steel hinge screws • Soft nose pads
*Sharpshooter lenses – additional details on page 27
AMMO SPORT ®
FRAME/TEMPLES
LENS
ITEM #
Black
Red Mirror
18041
• Wraparound design dual lens • Integrated rubber temples for firm hold • 8 base curve • Soft nose pads • Stainless steel hinge screws
BOAS XTREME ®
FRAME/TEMPLES LENS
ITEM #
Black
18026
Gray
• Gray temple, gray polarized lens • Rubber tipped temples • 8 base curve single lens • Rubber nose pads and temples • Stainless steel hinge screws
BREAKOUT
®
FRAME/TEMPLES LENS
ITEM #
Black
Polarized
18012 NEW!
Black
Red Mirror
18013
• Specialized rubber painted frame and temples • 8 base curve • Rubber nose pads and temple tips • Stainless steel hinge screws
Polarized lenses
ELLA FRAME/TEMPLES LENS
ITEM #
Pink
18040
Gray
• Universal fit with female flair • Wraparound frame design • Nylon frame material • Polycarbonate lens
• Padded temples • 8 base curve dual lens • Stainless steel hinge screws
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
23
Eye Protection - ONE NATION
9001:2008 Eye Protection - ONEISONATION
RETAIL READY
CONTRA
+
Z87
TM IO N AT R E N W E A ty O N E Y EER B Sa fe by
• 8 base curve • TPR nose pads and temple inserts reduce slippage • Matte finish • Stainless steel hinge screws
COMMANDOS SHARPSHOOTER ®
FRAME/TEMPLES
LENS
ITEM #
Black
Aussie Gray
18006
Black
Blue Mirror
18007
Black
In-Out Mirror
18008
FRAME/TEMPLES
LENS
ITEM #
Black
Sharpshooter
18050
TM
• Wraparound nylon frame • Padded temples • 8 base curve dual lenses
• Stainless steel hinge screws • Rubber nose pads
Sharpshooter lenses increase acuity, and remove glare and haze. For outside use requiring clear and high-definition sight.
EXILE
®
• Full frame design • Rubber tipped temples • 8 base curve single lens • Rubber nose pads and temples • Stainless steel hinge screws
FRAME/TEMPLES
LENS
ITEM #
Gray
Blue Mirror
18017
Gray
Gold Mirror
18018
Gray
Gray Polarized
18019
OUTRIDE
TM
• Rich black specialized rubber painted frame • Adjustable rubber nose pads • 8 base curve • Stainless steel hinge screws
FRAME/TEMPLES
LENS
ITEM #
Black
Blue Mirror
18032
Black
Orange Mirror
18033
Black
Silver Mirror
18034
TEMPLES
LENS
ITEM #
Black
Silver Mirror
18030
TX3 • Lightweight half frame design • Rubber temple tips
24
• 6.5 base curve dual lens • Stainless steel hinge screws
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
ONE NATION - Eye Protection
ISO 9001:2008
RETAIL READY
NEW!
+
Z87
FREE RIDE
TM
IO N AT R E N W E A ty O N Y E B Sa fe E
FRAME/TEMPLES
LENS
ITEM #
Metallic Silver
Gray Flash Mirror
17580
Metallic Olive
Gray Flash Mirror
17581
Metallic Brown
Gray Flash Mirror
17582
by
ER
• 8 curve • PC rubber tip temples • Padded nose pad
Retail Boxed ONE NATION - Eye Protection
®
Individually packaged in a unique, eye-catching retail box and suitable for hanging display. Great for quick, add-on counter sales, events, open houses and special occasions. 6 per carton.
TEMPLES/FRAME LENS
ITEM#
Camo
Red Mirror, Retail Box
18043
Camo
Silver Mirror, Retail Box
18048
Camo
Sharpshooter, Retail Box
18698
• Great looking, patriotic, camo safety glasses • Permanent foam cushion on frame interior • 8 base lens curve • Stainless steel hinge screws • Soft nose pads
American flag printed on left temple
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
25
PO
9001:2008 Eye Protection ISO - OCTANE
L
®
S
EN E S
EXILE
• Gray temple, gray polarized lens • Rubber tipped temples • 8 base curve single lens • Rubber nose pads and temples • Stainless steel hinge screws
LARIZ
FRAME/TEMPLES
LENS
ITEM #
Gray
Gray Polarized
18019
ED
PO
LARIZ
ED
Eye Protection - Polarized
S
L
EN E S
BREAKOUT
®
• Specialized rubber painted frame and temples • 8 base curve • Rubber nose pads and temple tips • Stainless steel hinge screws
PO
LENS
ITEM #
Black
Gray Polarized
18012
ED
LARIZ
FRAME/TEMPLES
S
L
EN E S
BOAS XTREME ®
• Black frame and temples, brown smoke polarized lenses • 8 base curve • Wide fashion temples are great for imprinting company logo
FRAME/TEMPLES
LENS
ITEM #
Black
Brown Smoke Polarized
17923
FRAME/TEMPLES
LENS
ITEM #
Black
Brown Smoke Polarized
18617
ED
PO
LARIZ
S
L
EN E S
COMMANDOS
®
PO
ED
LARIZ
• Black frame and temples, brown smoke polarized lenses • 8 base curve dual lenses • Soft rubber nose pad • Integrated rubber temples for non-slip hold • Stainless steel hinge screws
S
L
EN E S
8200
PO
FRAME/TEMPLES
LENS
ITEM #
Dark Brown
Brown Smoke Polarized
17913
ED
LARIZ
• Dark brown frame and temples, brown smoke polarized lenses • Adjustable rubber nose pads • 8 base curve, hard coated dual lenses • Stainless steel hinge screws
26
S
L
EN E S
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
®
E Protection
Eye Protection
ISO ye 9001:2008
MIRRORED SHARPSHOOTER LENSES
LIVE FREE
®
INCREASED ACUITY – DECREASED GLARE
FRAME/TEMPLES LENS
ITEM #
Camo
18049
Sharpshooter Lens
• American flag printed on left temple • Permanent foam cushion on frame interior • 8 base lens curve • Stainless steel hinge screws
For outside work requiring clear and high definition sight while removing annoying glare and haziness.
COMMANDOS
Perfect for:
®
• On the job • Hunting • Skiing And more...
FRAME/TEMPLES LENS
ITEM #
Black
18050
Sharpshooter Lens
• Sunglass fashion with ANSI protection • 8 base curve dual lenses • Soft rubber nose pad • Integrated rubber temples for non-slip hold • Stainless steel hinge screws • Polarized lenses available
NEW! - Eye Protection IPROTECT SLICK
TM
®
ITEM # 17450
Black
Clear Non-Stick
17451
Unc
o
ate
d
LENS Gray Non-Stick
Oleophobic/ Hydrophobic lens coating
te
TEMPLES Black
• Oleophobic and hydrophobic lens coating helps lenses stay clean longer • Comfortable, super lightweight • Frameless design • 9.5 base curve hard coated single lens • Stainless steel hinge screws
Co
d
a
I-FIT FLEX
TM
TEMPLES
LENS
ITEM #
Black
Clear
16265
Apple Green
Clear
16266
Orange
Clear
16267
Black
Gray
16268
Apple Green
Gray
16269
Orange
Gray
16270
• Frameless design • Flexible temples fit a broad range of head sizes comfortably and do not apply pressure • Cushioned nose pads • Dielectric, no metal parts
VERY LIGHTWEIGHT AND FLEXIBLE
ALL DAY FRAME/TEMPLES
LENS
ITEM #
Gray
Clear
15355
• Ergonomically correct • Fits most face types • Crystal clear lenses • Soft rubber nose pad and temple tips
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
ALL DAY COMFORT!
27
Eye Protection - OCTANE
OCTANE
Eye ProtectionISO- 9001:2008 Readers
®
®
Most Popular Style! Spectacle strap included
Hinge
FRAME/TEMPLES
LENS
ITEM #
Black
Clear
15324
Black
Clear Anti-Fog
15325
Black
Gray
15326
• Fits all face sizes
Black
Gray Anti-Fog
15327
• Wraparound temples
Black
Amber
15328
Black
Light Blue
15329
• Rubberized temple tips allow additional grip
Black
In/Out Mirror
15330
• 8.5 base curve
Black
Blue Mirror
15332
• Soft rubber nose pad
Black
Hi Res Mirror
15333
Black
Orange
15343
• Stocked in 15 options
Black
Brown Traffic Signal Recognition
15344
Red
Gray
15334
Camo
Brown Smoke Anti-Fog
15337
Camo
Amber Anti-Fog
Camo
A m ber
15339 A m ber
Hi Res Mirror
Meets CSA Standard Z94.3-15
15340
NEW! OCTANE PRODUCTS ®
Now available in a Retail Dispenser Box! OCTANE dispenser box gives workers convenient and easy access to safety glasses. Dispenser box includes 12 pair of individually packaged OCTANE eyewear in your choice of one of the most popular styles below. Great for retail display or in the workplace.
COMING SOON!
OCTANE READERS ®
®
®
FRAME
LENS
ITEM #
Black
Clear Anti-Fog
55325
Black
Gray Anti-Fog
55327
Black
In/Out Mirror
55330
Same great style and features as our original OCTANE eyewear! ®
Available in: +1.0, +1.5, +2.0 and +2.5 bifocal powers
FRAME/TEMPLES
LENS
ITEM #
Black
Clear + 1.0 power
17600
Black
Clear + 1.5 power
17601
Black
Clear + 2.0 power
17602
Black
Clear + 2.5 power
17603
12 count refills available
28
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
Eye Protection
ISO 9001:2008
BOAS XTREME ®
FRAME/TEMPLES LENS
ITEM #
Black
Clear
17920
White
Clear
17927
Black
Gray
17921
White
Gray
17928
Black
Silver Mirror
17922
White
Silver Mirror
17929
Black
Brown Smoke Polarized
17923
• Fashionable sunglass design • 8 base curve • Polarized lenses available • Integrated nose pads
BOAS ORIGINAL ®
FRAME/TEMPLES
LENS
ITEM #
Gray
Clear
15281
Clear
Clear
15284
Clear
Clear Anti-Fog
15400
Gray
Gray
15280
Gray
Gray Anti-Fog
Clear
In-Out Mirror
Amber
Amber
Blue
Blue Mirror
Gray
Silver Mirror
15401 O u t M irr o
r
I
n/
15308 15285
A m ber
• Ultra-lightweight polycarbonate frames ensure worker acceptance • Wraparound design fits snugly for total optical protection • Features a 9.75- base spherical polycarbonate lens • Stainless steel hinge screws
15287 15282
BOAS ECONOMY ®
BULK PACK
Uncoated lenses; 144 per bulk pack FRAME/TEMPLES
LENS
ITEM #
Clear
Clear Uncoated
15300
Gray
Gray Uncoated
15301
• Same great style and fit as Boas Orginal • Low cost alternative • Stainless steel hinge screws • Uncoated lenses ®
SPORT BOAS FRAME
LENS
ITEM #
Gray
Clear Anti-Fog
16400
Gray
Gray Anti-Fog
16401
®
• Adjustable elastic band affords the Sport Boas optimal comfort • Soft gel brow cushion offers additional protection • Soft gel nosepiece with finger-like design holds eyewear comfortably in place ®
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
29
Eye Protection
9001:2008 Eye PISOrotection
AMMO
®
COMMANDOS
®
• 8 base curve dual lenses • Soft rubber nose pads • Integrated rubber temples • Stainless steel hinge screws • Polarized lenses available
FRAME/TEMPLES
LENS
ITEM #
Black - With foam lining
Clear Anti-Fog
15410
Black - With foam lining
Gray Anti-Fog
15411
Black - Without foam lining Clear Anti-Fog
15412
Black - Without foam lining Gray Anti-Fog
15413
FRAME/TEMPLES
LENS
ITEM #
Black
Clear
18612
Black
Clear Anti-Fog
18614
Black
Gray
18610
Black
Brown Smoke Polarized
18617
Black
Revo Red Mirror
Camo
Amber
Camo
Gray
Black
Sharpshooter Lens
FRAME/TEMPLES
LENS
ITEM #
Dark Brown
Brown Smoke Polarized
17913
Re
d M irr o r
18611 18616
A m ber
Sh
arp
18615
rs
Available with foam lining or without foam lining
• Wraparound design dual lens • Foam delivers greater comfort and increased protection from wind, dust, airborne debris, and small particles • Integrated rubber temples • 8 base curve • Stainless steel hinge screws • Rubber nose pads
s h o ot
e
18050
8200 • Comfort and style all-in-one • Adjustable rubber nosepiece for personal fit • 8 base curve, hard coated dual lens • Stainless steel hinge screws
®
• Rubber tipped temples • 6.5 base curve single lens • Adjustable nose pad • Stainless steel hinge screws
ITEM # 16805
Blue
Clear
16810
Black
Gray
16806
Blue
Gray
Blue
In/Out Mirror
16811
FRAME/TEMPLES
LENS
ITEM #
Black
Clear
15200
Black
Clear Anti-Fog
15237
Black
Gray
15201
n/
O u t M irr o
16812
®
• Conventional style • 4 base curve lens • Economical • 4-position adjustable temple lengths • Stainless steel hinge screws • Integrated nose pads
30
LENS Clear
I
STING-RAYS
FRAME/TEMPLES Black
r
KEYSTONE
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
ISO 9001:2008
BEST SELLERS
Eye Protection INHIBITOR
®
TEMPLES
LENS
ITEM #
Clear
Clear
17969
Brown Smoke
Brown Smoke
Clear
In/Out Mirror
Clear
In/Out Mirror Anti-Fog
17970
I
n/
r
O ut Mi
rro
O u t M irr o
r
I
n/
• Frameless wraparound design • 9.5 base curve single lens • Soft non-slip rubber temple tips • 4-position adjustable temple length • Stainless steel hinge screws
17971 17982
BULK PACK
Hard coated lens; 144 per bulk pack TEMPLES Clear Brown Smoke
LENS Clear Brown Smoke
ITEM # 13969 13970
INHIBITOR NXT ®
TEMPLES
LENS
ITEM #
Clear
Clear
17056
Gray
Gray
17057
Clear
Clear Anti-Fog
17058
Gray
Gray Anti-Fog
Clear
In/Out Mirror Anti-Fog
Blue Gray
Blue Gray
17061
Blue
Blue
17062
NEW!
Amber
Amber
17063
NEW!
17064
NEW!
17065
NEW!
17066
NEW!
• Frameless wraparound design • 9.5 base curve single lens • Soft non-slip rubber temple tips • Stainless steel hinge screws • Integrated nose pads
17059 O ut Mi
rro
r
I
n/
Blu e
A m ber
17060
Orange
Orange
Black
Silver Mirror
Gray
Blue Mirror
TEMPLES
LENS
ITEM #
Black
Clear
15529
Black
Clear Anti-Fog
15530
Black
In/Out Mirror
Black
Gray
15531
Black
Gray Anti-Fog
15532
Orange
e r M irro
Bl
u e M irror
O u t M irr o
r
I
n/
r
S
il v
GREAT VALUE!
Designed for low light conditions
INVASION
®
15533
ECONOMY BULK PACK
• Soft nose pad for comfortable fit • Soft rubber temple for ultra hold and flexibility • Frameless wraparound design • 9 base curve single lens
Uncoated lens; 144 per bulk pack LENS Clear Uncoated Gray Uncoated
ITEM # 15535 15536
TEMPLES
LENS
ITEM #
Clear
Clear
17940
Clear
Clear Anti-Fog
17510
Clear
In/Out Mirror
Gray
Gray
17941
Gray
Gray Anti-Fog
17511
Amber
Amber Anti-Fog
Blue
Blue
I
n/
O u t M irr o
r
TEMPLES Black Black
17942
17512 A m ber
Blu e
17515
White
Clear Anti-Fog
White
Gray Anti-Fog
17933 17934
Black
Clear
17961
Black
Gray
17962
IPROTECT
®
• Comfortable, super lightweight, frameless design • 9.5 base curve hard coated single lens • Stainless steel hinge screws
ECONOMY BULK PACK
Uncoated lens; 300 per bulk pack TEMPLES Clear Gray
LENS Clear Uncoated Gray Uncoated
ITEM # 17500 17501
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
31
Eye Protection
9001:2008 Eye PISOrotection
NT2 FRAME
LENS
ITEM #
Silver - Notched foam lining
Clear Anti-Fog
17997
Silver - Notched foam lining
Gray Anti-Fog
17998
Silver - Solid foam lining
Clear Anti-Fog
18000
Silver - Solid foam lining
Gray Anti-Fog
18001
Available with solid foam lining or notched foam lining (shown)
• Wraparound design for optimal coverage • 9.5 base curve single lens • High-gloss finish • Stainless steel hinge screws
FRAME/TEMPLES
LENS
ITEM #
Clear/Silver
Clear
16503
Clear/Clear
Clear
16509
Clear/Clear
Clear Anti-Fog
16515
Gray/Gray
Gray
16510
Pewter/Pewter
Gray
16501
Gray/Blue
Gray
16500
Gray/Gray
Gray Anti-Fog
Gray/Blue
Blue Mirror
Gray/Silver
In/Out Mirror
Gray/Pewter
Silver Mirror
TEMPLES
LENS
ITEM #
Black
Clear
15420
Red/White/Blue
Clear
15427
Black
Clear Anti-Fog
Black
Amber
16516 u e M irror
n/
O u t M irr o
I
Bl
16506 16504
r
SUPERBS
Interchangeable temples and strap
S
il v
16505
e r M irro
r
• Lightweight frame with heavy duty protection • 8 base curve polycarbonate dual lenses withanti-fog coating • Inner foam lining provides a comfortable, snug fit with the added dust and debris protection of a goggle • Temples and elastic strap are interchangeable • Stainless steel hinge screws
STRIKERS
®
Gray
Red/White/Blue
Gray
15421
Black
Silver Mirror
Black
Gold Mirror
FRAME/TEMPLES
LENS
ITEM #
Black
Clear
16855
Black
Gray
Black
In/Out Mirror
Black
Blue Mirror
Black
Orange
15428 il v
Go
15423
r
15424
e r M irro
l d M irr o
®
Spectacle strap included
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
16856 O u t M irr o
Bl
r
n/
I
• Lightweight contemporary design • 6.75 base curve single lens • Stainless steel hinge screws
32
15422
Black
S
MALTESE
15426 A m ber
r
• Frameless wraparound design • 6.5 base curve single lens • Adjustable nose pad for comfortable fit • Rubber tipped temples • Stainless steel hinge screws
u e M irror
Orange
16857 16858 16859
Readers - Eye Protection
ISO 9001:2008
G COMIN ! N O O S FRAME/TEMPLES
LENS
ITEM #
Black
Clear + 1.0 power
17600
Black
Clear + 1.5 power
17601
Black
Clear + 2.0 power
17602
Black
Clear + 2.5 power
17603
OCTANE Readers ®
• Fits all face sizes • Wraparound temples • Rubberized temples tips provide additional grip • 8.5 base curve • Soft rubber nose pads
Spectacle strap included
ERB X Readers ®
FRAME/TEMPLES
LENS
ITEM #
Black
Clear 1.0 power
16870
Black
Clear 1.5 power
16871
Black
Clear 2.0 power
16872
Black
Clear 2.5 power
16873
Black
Gray 1.0 power
16874
Black
Gray 1.5 power
16875
Black
Gray 2.0 power
16876
Black
Gray 2.5 power
16877
Spectacle strap included • 8 base curve dual lenses • 3-position adjustable temple lengths • 2-position (up/down) ratcheting temples • Available in +1.0, +1.5, +2.0 and +2.5 bifocal powers • Stainless steel hinge screws
IPROTECT Readers ®
TEMPLES
LENS
ITEM #
Clear
Clear 1.0 power
17987
Clear
Clear 1.5 power
17988
Clear
Clear 2.0 power
17989
Clear
Clear 2.5 power
17990
Gray
Gray 1.0 power
17992
Gray
Gray 1.5 power
17993
Gray
Gray 2.0 power
17994
Gray
Gray 2.5 power
17995
• Comfort of iProtect eyewear offered in readers style • 9.5 base curve hard coated single lens • Available in +1.0, +1.5, +2.0 and +2.5 bifocal powers • Stainless steel hinge screws
PINPOINT Readers ®
FRAME/TEMPLES
LENS
ITEM #
Gray
Clear + 1.0 power
17560
Gray
Clear + 1.5 power
17561
Gray
Clear + 2.0 power
17562
Gray
Clear + 2.5 power
17563
Gray
Gray + 1.0 power
17564
Gray
Gray + 1.5 power
17565
Gray
Gray + 2.0 power
17566
Gray
Gray + 2.5 power
17567
• Traditional, lightweight reader safety glass • Soft rubber adjustable nose pads • Rubber temple tips • Available in +1.0, +1.5, +2.0 and +2.5 bifocal powers • Stainless steel hinge screws
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
Spectacle strap included
33
Eye Protection & Goggles
ISO 9001:2008
CUSTOM PRINTED EYE PROTECTION • Low order minimum • Artwork services available (charges apply) • Quick turnaround • One color logo per print location
CALL TO ORDER! 855-621-9100 EXPANDED VIEW
SWITCHBACK
®
• Traditional style • 9 base curve • Polycarbonate molded side shields • Rubber temple tips • 6-position ratchet temples FRAME
LENS
ITEM #
Clear
Clear
17935
Gray
Gray
17936
• Chemical splash protection • Wraparound style provides panoramic view • Indirect vents for increased air flow • Anti-Fog coated lens • Black strap masks grease and grime • Strap is 60% polyester/40% rubber thread
Ratchet Temples
SPLASH GUARD
606 OTG • Over-the-Glass protection • Exceptional peripheral vision and coverage • 6 base curve dual lenses • Stainless steel hinge screws
DESCRIPTION
ITEM #
122 Clear Anti-Fog
15119
• Chemical splash protection • Flexible vinyl frame provides excellent facial fit • Four indirect vents allow airflow • Uncoated clear lens • Available with anti-fog coating • Black strap masks grease and grime
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
Clear Anti-Fog
15656
117
15145
Gray Anti-Fog
15657
117S - for small faces
15149
118 Anti-Fog
15147
Small size goggle available, 117S
VISITOR/UTILITY SPECTACLES • Uncoated lens provides an economical alternative in eye protection • 4 base curve lens • Dielectric
34
PERFORATED
• Multi-purpose ultra soft goggle • Flexible vinyl frame provides excellent facial fit • Perforated to allow ventilation • Uncoated clear lens • Available with anti-fog coating • Black strap masks grease and grime
DESCRIPTION
ITEM #
115
15144
DESCRIPTION
ITEM #
115S - for small faces
15148
Clear
15654
116 Anti-Fog
15143
Gray
15655
Small size goggle available, 115S
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
Accessories - Eye Protection
ISO 9001:2008
24” SPECTACLE STRAP
NEW!
WIREDOG
TM
• Polypropylene blend • Plastic loop eyewear retainer • Metal detectable • 12 per carton DESCRIPTION
ITEM #
Black
15703
Red
15704
Blue
15705
Hi-Viz Orange
15707
• Fits most ONE NATION Eyewear • Lightweight • Fits most head sizes • Retains shape • Quick release if caught or snagged • 12 per carton
• Polypropylene blend • Adjustable length mono slide • Rubber tube temple retainers • 12 per carton ITEM #
Black
15320
Red
15321
Blue
15322
Hi-Viz Pink
15323
Hi-Viz Pink Retail Ready
43003
ITEM #
Black
15750
CAN BE USED WITH ONE NATION DISPLAY See page 22 for details
22” SPORTS STRAP
DESCRIPTION
DESCRIPTION
ERB SAFETY LOGO MIRROR DISPLAY • ERB Safety logo display • Displays five pair of ERB Safety protective eyewear • Ideal for small display area • Full mirror • 14.5” H x 6.75” W x 4.75” D • 1 per carton
20.5” SPECTACLE STRAP • 100% polyester • Adjustable • Knit sleeve strap securely holds temples • 12 per carton DESCRIPTION
ITEM #
Black Deluxe
15716
19.5” BREAK-AWAY SPECTACLE STRAP • 100% polyester • Shoestring style cord with quick release safety feature • A reconnecting break-away cord provides safety • Rubber/cloth tube retainers slip onto the ends of temples securing eyewear • 12 per carton
DESCRIPTION
ITEM #
ERB Logo
15718
GIRL POWER AT WORK LOGO MIRROR DISPLAY • Displays five pair of Girl Power at Work Safety protective eyewear • Ideal for small display area • Full mirror • 14.5” H x 6.75” W x 4.75” D • See Girl Power Eyewear on Page 42 • 1 per carton
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
Black Break-Away
15708
Girl Power Logo
15719
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
35
Eye Protection - Accessories PARKER’S PERFECT ANTI-FOG TOWELETTES TM
ISO 9001:2008
NEW!
EC021 Eyewear Case • 600D polyester • Zipper closure • Belt loop attachment • Dimensions: 7.28” W x 3.15” H x 3.54” D • 12 per carton DESCRIPTION
ITEM #
Goggle Case
15800
NEW!
EC022 Goggle Case
• Designed to keep eyewear from fogging in cold, hot or humid conditions • Contains a cleaner that helps remove facial oils, hair spray, make-up, sweat, etc. • Leaves a protective film that helps protect lenses from scratching, fingerprints and smudges • Environmentally safe, hypoallergenic • Does not contain acid, ammonia or abrasives • Dispenser can be wall mounted or stand alone • 100 packets per box DESCRIPTION
ITEM #
FP100 Parkers Anti-Fog Towelettes
15697
PROTECTIVE EYEWEAR SHIELDS
• 600D polyester • Zipper closure • Belt loop attachment • Dimensions: 7.48” W x 5.11” H x 3.54” D • 6 per carton DESCRIPTION
ITEM #
Goggle Case
15801
ECO20 Eyewear Case With Hook • Holds all ERB eyewear styles • Hooks easily or attach to belt loops • 1200 Denier polyester • 6 per carton
DESCRIPTION
ITEM #
ECO20 Case with hook
15713
SC31 Spectacle Clean Pouch
• Protective eyewear slip-on side shields • Can be used with a variety of eyewear styles • 20 pair per box
36
• Protects eyewear • 100% nylon bag with drawstring closure • Serves as cleaning cloth • Dimensions: 5” W x 9” L • 12 per carton
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
Clear
15744
SC31 Clean Pouch
15710
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
Ear Plugs - Hearing Protection
ISO 9001:2008
REUSABLE EAR PLUGS DESCRIPTION
ITEM #
ERB-04 ORANGE
14387
ERB-04C ORANGE
14388
ERB-04V ORANGE
14392
ERB-04 PINK
14396
ERB-04C PINK
14397
• Distinctive triple flanged design • Unique parabolic design provides an improved contact area with the ear canal, improving sound attenuation properties and comfort • Available with cord (ERB-04C) and uncorded (ERB-04), one pair per individual polybag
• ERB-04V packed one pair of corded plugs per vial • NRR 25dB (when used as directed) • Convenient dispenser box - 100 pair/box (ERB-04 and ERB-04C), 50 pair/box (ERB-04V)
Also available in
ERB-04C YOUR LOGO HERE (printable area)
ERB-04V Vial can be imprinted. Call for details. ERB-04
DISPOSABLE EAR PLUGS DESCRIPTION
ITEM #
ERB-03 ORANGE
14381
ERB-03C ORANGE
14382
ERB-03V ORANGE
14383
• Soft, smooth surface for better fit and hygiene • Available with cord (ERB-03C) and uncorded (ERB-03), one pair per individual polybag
plugs per vial • NRR 32dB (when used as directed) • Convenient dispenser box - 200 pair/box (ERB-03 and ERB-03C), 80 pair/box (ERB-03V)
• ERB-03V packed one pair of uncorded
ERB-03C
YOUR LOGO HERE (printable area)
ERB-03
ERB-03V Vial can be imprinted. Call for details.
DISPOSABLE EAR PLUGS DESCRIPTION
ITEM #
GP-05 (PINK)
28850
GP-05C (PINK)
28851
• Perfect for small ear canals • Soft, smooth surface for better fit and hygiene • Available with cord (GP-05C) and uncorded (GP-05), one pair per individual polybag
• NRR 30dB (when used as directed) • Convenient dispenser box - 100 pair/box (GP-05 and GP-05C)
GP-05 GP-05C
ALL HEARING PROTECTION MEET THE REQUIREMENTS OF ANSI S3.19
37
Hearing Protection - Ear Muffs
ISO 9001:2008
105 Deluxe Ear Muff • Padded headband • Padded ear cushions • Dielectric • Multi-position • Fits a wide range of head sizes
• NRR 26dB (when used as directed) • Retail ready • 12 per carton
DESCRIPTION
ITEM #
105 Deluxe Black
14234
105 Deluxe Hi-Viz Lime
14235
DESCRIPTION
ITEM #
201 Red
14225
DESCRIPTION
ITEM #
239 Blue
14231
239 Black
14241
239 Pink
14242
239 Purple
14243
239 Blue Digital Camo
14244
239 Green Camo
14245
DESCRIPTION
ITEM #
801 Ear Muff Holder
15714
201 Economical Ear Muff • Lightweight • Vinyl ear cushions • Dielectric • Height adjustable • Fits a wide range of head sizes
• NRR 21dB (when used as directed) • Retail ready • 12 per carton
• Unique folding design allows convenient storage • Foam filled ear cushions • Dielectric • Height adjustable
• Fits a wide range of head sizes • NRR 23dB (when used as directed) • Retail ready • 12 per carton
239 Foldable Ear Muff
Also available in
801 Ear Muff Holder • Holds your ear muffs when not in use • Made from flexible PVC for long lasting durability • Hook & loop closure for easy access
38
• Attaches to belt for convenience • Can be logo’d. Call for quote • 12 per carton
ALL HEARING PROTECTION MEET THE REQUIREMENTS OF ANSI S3.19
Safety products developed by for
women women
W651 Women’s Fitted Soft Shell (Class 2)
According to the Bureau of Labor Statistics, 10 percent of construction workers and 30 percent of manufacturing workers are women. Not surprisingly, the demand for products specifically designed for women is increasing. Women seek products designed with form, fit, function, color and style.
• Contoured waist for better fit • 3 fused fabric layers: soft outer shell, weather resistant middle and warm brushed fleece interior • Breathable, water and wind resistant • Comfortable polyester/spandex • Draw string hem with cord stopper • Black bottom hides dirt and grime • 2 zippered slash pockets • Adjustable cuffs • Zipper closure with tunnel collar • Meets ANSI/ISEA 107-2015 requirements
2
LG
62198
XL
62199
2X
62200
3X
62201
HEAD PROTECTION
Po c ets k
oc
k e ts Plu
s
62197
P
MD
Zip p er
W
ater Proo
f
SIZE
Americana Full Brim ®
page 6
Americana Cap ®
• Hi-Viz Pink • Pink • White
page 4
Omega II Cap ®
page 6
39
Girl Power at Work NEW! S762P
Unisex Fit (Non ANSI)
SIZE 61330 61331
LG
61332
XL
61333
2X
61334
3X
61335
4X
61336
5X
61337
S o li d
4
Po c ets k
H
oo
S720
Women’s Fitted (Class 2)
• 100% polyester mesh • Side slits • Repositioned tape • Contoured waist • 2 exterior waist pockets • Meets ANSI/ISEA 107 requirements, Type R
k & Loo
p
• 100% polyester tricot • 2 exterior waist pockets with hook & loop closure • 1 left chest pocket with pen compartment • Great for visitor identification, benefit walks or promotional events • Does not meet ANSI requirements
SM MD
SIZE NEW!
SM
61915
MD
61916
LG
61917
XL
61718
2X
61919
3X
61920
NEW!
4X
61921
NEW!
5X
61922
S o li d
2
Po c ets k
Zip p er
S721
Women’s Fitted (Non ANSI)
• 100% polyester tricot • Side slits • Repositioned tape • Contoured waist • 2 exterior waist pockets • Great for women at work, visitor identification, benefit walks or promotional events • Does not meet ANSI requirements
S720/S721
Women’s Fitted Vest 15 Pack Retail Display Box
S720 HI-VIZ LIME Includes: 15 Vests - 4 Medium, 5 Large, 3 X-Large, 2 2X-Large, 1 3X-Large S721 HI-VIZ PINK Includes: 15 Vests - 2 Small, 4 Medium, 4 Large, 3 X-Large, 2 2X-Large
SIZE SM
61909
MD
61910
LG
61911
XL
61912
2X
61913
3X
61914
4X
61924
5X
61925
S o li d
2
Po c ets k
Zip p er
43001
43002
S o li d
2
Po c ets k
Zip p er
40
SIZE
S o li d
2
Po c ets k
k ets
oo
k & Loo
62227
MD
62228
LG
62229
XL
62230
2X
62231
3X
62232
• 100% polyester tricot • 2 interior waist pockets • Sized for women • Great for women in work environments that require break-away apparel • Does not meet ANSI requirements
s
Plu
H
SIZE M esh
4
Po c ets k
oo
k & Loo
MD
63322
LG
63323
XL
63324
2X
63325
3X
63326
4X
63327
5X
63328
S730
Unisex with Pink Trim (Class 2)
• 100% polyester mesh • 2” silver reflective tape backed by contrasting trim • 1 exterior left chest pocket with pen compartment • 2 exterior waist pockets with hook & loop closure • Meets ANSI/ISEA 107 requirements, Type R
H
p
s
k e ts Plu
P
oc
DESCRIPTION One Size Fits Most
S o li d
S102 61728
Hi-Viz Pink One Size (Non ANSI)
• 100% polyester tricot • Durable elastic side straps • Great for women at work, visitor identification, benefit walks or promotional events • Does not meet ANSI requirements
0 3
Po c ets k
k & Loo
p
H
oo
S725 Women’s Break-Away (Non ANSI)
p
P
oc
SM
SIZE
S o li d
0
Po c ets k
XS
61287
SM
61288
MD
61289
LG
61290
XL
61291
2X
61292
3X
61293
7000 Women’s Fitted (Non ANSI) • 100% polyester jersey knit • Moisture wicking • Contoured waist • Does not meet ANSI requirements
41
Girl Power at Work ANNIE
• Wraparound temples • Rubberized temple tips allow for additional grip • 8.5 base curve
• Lenses are treated with scratch resistant coating • Soft rubber nose pad
FRAME/TEMPLES Pink Camo Pink Camo
LENS Clear Gray
ITEM # 15341 15342
• Universal fit with female flair • Wraparound frame design • Nylon frame material • Polycarbonate lens
• Padded temples • 8 base curve dual lens • Stainless steel hinge screws
FRAME/TEMPLES Pink Pink Pink Pink Gray Gray Purple Purple
LENS Clear Gray Clear Anti-Fog Gray Anti-Fog Clear Gray Clear Gray
ITEM # 18618 18619 18620 18621 18622 18623 18624 18625
TEMPLES Pink
LENS Soft Pink
ITEM # 18596
TEMPLES Pink Pink Pink Pink Tortoise Tortoise White White White with Girl Power logo imprint
LENS Clear Anti-Fog Gray Anti-Fog Clear Gray Clear Anti-Fog Gray Anti-Fog Clear Anti-Fog Gray Anti-Fog Clear Anti-Fog
ITEM # 17946 17947 17958 17959 17513 17514 17943 17944 17750
• Sporty ladies style • Decorative rhinestones on temples • 8 base curve dual lens
FRAME/TEMPLES Pink Pink Black Tortoise Shell Tortoise Shell
LENS Clear Gray Brown Smoke Clear Brown Smoke
ITEM # 17953 17954 17955 17956 17957
• Ergonomically correct • Fits most face types • Crystal clear lenses • Soft rubber nose pad and temple tips
FRAME/TEMPLES Purple
LENS Clear
ITEM # 15350
Spectacle strap included
ELLA
GRACE • Wraparound single lens • Rubberized temple tips provide additional grip • Integrated nose pads • Considered a clear lens per ANSI Z87.1
LUCY
• Popular iProtect style made for ladies • Ultra lightweight, frameless design • 9.5 base curve single lens • Stainless steel hinge screws
ROSE
Rhinestone Detail
SUSAN
42
ALL DAY COMFORT!
Meets ANSI Z87.1 - Impact • Anti-scratch (hard coat) on all eyewear unless otherwise noted. All polycarbonate lenses offer 99% UV Protection • All eyewear packaged 12 per carton unless otherwise noted.
gloves
A735 Mesh Neck Shield With Pink Trim
Dimensionally Proportioned To Fit Women’s Hands PADDED PALMS TERRYCLOTH THUMBS
• Ultra lightweight 100% polyester • Elastic band fits securely around hat brim • Provides protection from sun and heat while increasing visibility • Fits all ERB cap and full brim style helmets • 3 per carton
RETAIL READY
DESCRIPTION NECK SHIELD
19283
M esh
239 Foldable Ear Muff
• Unique folding design allows convenient storage • Foam filled ear cushions • Meets the requirements of ANSI S3.19 • Dielectric • Height adjustable • Fits a wide range of head sizes • NRR 23dB (when used as directed) • Retail ready • 12 per carton
NARROWER PALM WITH RESIZED LENGTH & WIDTH
RESIZED FINGERS
MGP100 Women’s Mechanics Gloves • Available with pink or black glove backs • Resized fingers • Narrower hand width • Synthetic leather fingertips, fourchettes and padded palm • Terrycloth thumbs • Air vents for breathability • Spandex and foam back • Neoprene cuff, lycra cuff binding
DESCRIPTION FOLDING EAR MUFF
14242
14243
Disposable Ear Plugs
SIZE XS
28857
28861
SM
28858
28862
MD
28859
28863
LG
28860
28864
• Perfect for small ear canals • Soft, smooth surface for better fit and hygiene • Available with cord (GP-05C) and uncorded (GP-05), one pair per individual polybag • NRR 30dB (when used as directed) • Convenient dispenser box 100 pair/box (GP-05 and GP-05C)
L1 Female Lab Coat
DESCRIPTION
• Left chest pocket • Two lower pockets • 5 button front • Stitched down back belt • 65/35 poly/cotton poplin
GP-05 (UNCORDED)
28850
GP-05C (WITH CORD)
28851
Reusable Ear Plugs • Distinctive triple flanged design • Unique parabolic design provides an improved contact area with the ear canal, improving sound attenuation properties and comfort • Available with cord (ERB-04C) and uncorded ERB-04), one pair per individual polybag • NRR 25dB (when used as directed) • Convenient dispenser box100 pair/box (ERB-04 and ERB-04C)
SIZE XS
82523
83356
SM
82524
83357
MD
82525
83358
LG
82526
83359
XL
82527
83360
2X
82528
83361
3X
82529
83362
4X
82530
83363
DESCRIPTION ERB-04 (UNCORDED)
14396
ERB-04C (WITH CORD)
14397
Check out additional Girl Power items listed throughout this catalog... #1 Bump Cap in America
22” Pink Sports Strap
Available in Hi-Viz Pink See page 10 Also available with hang tag. See page 35
Hi-Viz Pink Eyewear Clip See page 16
...and more 43
Aware Wear - Reference Guide
Aware Wear - LOGO LEADER
So
n it
ICON LEGEND id
J ersey
l
S o li d
M esh
Hi-Viz Lime
Hi-Viz Orange
Solid
Mesh
Solid Jersey Knit
Indicates color of garment’s background material component
Indicates color of garment’s background material component
Indicates texture of garment’s background material component
Indicates texture of garment’s background material component
Indicates texture of garment’s background material component
oo
k & Loo
p
k e ts Plu
s
it
oc
Po c ets k
H
4
seye Kn
P
B
ir d
Zip p er
Hook & Loop
Zipper
Indicates texture of garment’s background material component
Indicates number of garment’s pockets
Indicates that one or more pockets will fit a 5.5” cell phone with a sturdy case
Indicates type of garment’s closure
Indicates type of garment’s closure
R e sis
t
An
ti S t a ti c
li c
Ve
an
ra
f
me
b
i
& Eva po
Pu
ng
Fla
W ic k
ater Proo
st
Pocket Plus
t
Pocket Quantity
ti o n
Birdseye Knit
W
S afety
Waterproof
Wicking & Evaporation
Flame Resistant
Anti Static
Public Safety Vest
Indicates type of garment’s weather resistance
Indicates garment’s breathability, water resistance and comfort
For more information see Page 53
Indicates background material meets EN1149 anti static requirements
Meets standards required for Public Safety Vests
(Used on all high-visability garments unless otherwise noted)
All ANSI/ISEA 107 garments meet Type R unless otherwise stated
44
K
Section Index - Aware Wear Aware Wear Class 2 Vests........................................................... 46-57 Best Sellers....................................................... 46-47 S362, S362P, S363, S363P, S363ID, S363PB Break-Away...................................................... 48-49 S320, S322, S101X, S360, S361 Multi-Pocket...................................................... 50-54 S382, S382T, S149, S383P, S380, S380SC S252C, S414, S730, S169, S388, S388Z, S381, S251, S205, S156 3M ScotchliteTM.......................................................55 S15, S15Z, S17, S17P Flame Resistant/Flame Retardant...................... 56-57 S150Z, S150, S152Z, S152, S153, S190, S365 Class 3 Vests........................................................... 58-61 S662, S663P, S6631P, S680, S682P, S683P, S620, S622, S661, S601X, S852 Non ANSI Vests........................................................ 62-64 S18, S18R, S19, S22R, S410, S103, S179, S813, S530, S903 Public Safety Vests.........................................................65 S340, S345, S368 Short Sleeve T-Shirts............................................... 66-68 9006, 9006S, 9006ST, 9006SX, 9601, 9601S, 9604S, 9604SBC, 9801S Polo Shirt.......................................................................69 S369 Long Sleeve T-Shirts................................................ 69-71 9007, 9007S, 9602, 9602S, 9802S, 9804S, 9804SBC Work Pants....................................................................71 S21, S210 Cold Weather Wear................................................... 72-79 W144, W105, W106, W106T, W550, W530B, W510, W650, W651, S374, W379B, W143, W375, W375B, W376, W376B, W376C, W376BC Rainwear................................................................. 80-82 S373, S373D, S373PT, S373PTB, S371, S163, S850PT, S849, S860BIB Hi-Viz Accessories.........................................................83 S230, S109, A110, S108, S268, BP1, S486, S487, S291
45
Aware Wear - Vests
BEST SELLERS
MD
61425
61433
LG
61426
61434
XL
61427
61435
2X
61428
61436
3X
61429
61437
4X
61430
61438
5X
61431
61439
M esh
0
Po c ets k
H
oo
S362P
(Class 2)
Economy Mesh
• 100% polyester mesh • 1 exterior left chest pocket with pen compartment • 2 exterior waist pockets with hook & loop closure
SIZE XS
61627
M esh
—
SM
61628
—
MD
61629
61638
LG
61630
61639
61631
61640
61632
61641
3X
61633
61642
4X
61634
61643
5X
61635
61644
4
Po c ets k
oc
k e ts Plu
oo
k & Loo
P
XL 2X
H
Meets ANSI/ISEA 107 Requirements
See Page 28
46
k & Loo
p
• 100% polyester mesh • No pockets
SIZE
s
Economy Mesh (Class 2)
p
S362
SIZE M esh
0
Po c ets k
MD
61445
61453
LG
61446
61454
XL
61447
61455
2X
61448
61456
3X
61449
61457
4X
61450
61458
5X
61451
61459
XS
61645
61656
Economy Mesh (Class 2)
• 100% polyester mesh • No pockets
k & Loo
SIZE M esh
4
Po c ets k
k e ts Plu
s
P
oc
S363
p
H
oo
Vests - Aware Wear
BEST SELLERS
SM
61646
61657
MD
61647
61658
LG
61648
61659
XL
61649
61660
2X
61650
61661
3X
61651
61662
4X
61652
61663
5X
61653
61664
6X
61654
—
7X
61655
—
S363P
(Class 2)
Zipper Economy Mesh
• 100% polyester mesh • 1 exterior left chest pocket with pen compartment • 2 exterior waist pockets with hook & loop closure
Zip p er
NEW! M esh
SIZE
2
Po c ets k
k e ts Plu
s
P
oc
MD
62660
62667
LG
62661
62668
XL
62662
62669
2X
62663
62670
3X
62664
62671
4X
62665
62672
5X
62666
62673
S363ID
Zipper Mesh with Chest ID Pocket (Class 2)
• 100% polyester mesh • 1 interior waist pocket with hook & loop closure • 1 exterior left chest ID Pocket double stitched reinforced (measures 5.25” x 4.25”)
Zip p er
NEW! M esh
SIZE
4
Po c ets k
k e ts Plu
62250
62257
LG
62251
62258
XL
62252
62259
2X
62253
62260
3X
62254
62261
4X
62255
62262
5X
62256
62263
s
P
oc
MD
Zip p er
S363PB (Class 2)
Zipper Economy Mesh
• 100% polyester mesh • Black bottom • 1 exterior left chest pocket with pen compartment • 2 exterior waist pockets with hook & loop closure
Meets ANSI/ISEA 107 Requirements
47
Aware Wear - Vests
Aware Wear - Vests | Break-Away Break-Away
61110
61101
61111
XL
61102
61112
2X
61103
61113
3X
61104
61114
4X
61105
61115
5X
61106
61116
M esh
3
Po c ets k
k e ts Plu
oo
k & Loo
P
oc
H
Contrasting Trim Break-Away (Class 2)
• 100% polyester mesh • 2” silver reflective tape backed by contrasting trim • 2 interior waist pockets with hook & loop closure • Mic tab on left side
SIZE MD
61845
LG
61846
XL
61847
2X
61848
3X
61849
4X
61850
5X
61851
M esh
2
Po c ets k
k e ts Plu
oo
k & Loo
P
oc
H
S101X
(Class 2)
X-Back Break-Away
• 100% polyester tricot • Accepted by railroads • X on back helps indicate which way wearer is facing • Left interior waist pocket with hook & loop closure • 2 exterior waist pockets with hook & loop closure • Mic tabs on both sides
SIZE MD
61733
61740
LG
61734
61741
XL
61735
61742
2X
61736
61743
3X
61737
61744
4X
61738
61745
5X
61739
61746
S o li d
3
Po c ets k
oc
k e ts Plu
oo
k & Loo
P
H
Meets ANSI/ISEA 107 Requirements
48
s
S322
s
61100
LG
p
MD
p
• 100% polyester mesh • 5-point break-away • 2 interior waist pockets with hook & loop closure
SIZE
s
Mesh Break-Away (Class 2)
p
S320
Break-Away
SIZE S o li d
5
Po c ets k
oo
k & Loo
61375
LG
61376
XL
61377
2X
61378
3X
61379
4X
61380
5X
61381
S360
Multi-Pocket Break-Away (Class 2)
• 100% polyester woven oxford • Right interior waist pocket with hook & loop closure • 2 exterior waist pockets with hook & loop closure • Right exterior waist pen compartment • Left exterior chest radio/phone pocket flapped with hook & loop closure with gusset • Mic tabs on both sides
H
p
s
k e ts Plu
P
oc
MD
Vests - Aware Wear
SIZE S o li d
6
Po c ets k
oo
k & Loo
61390
LG
61391
XL
61392
2X
61393
3X
61394
4X
61395
5X
61396
S361
5-point Break-Away D-Ring (Class 2)
• 100% polyester tricot • Fall Protection D-Ring slot on back, slot located 4” down from the neck line • 2 exterior waist pockets flapped with hook & loop closure • Exterior left chest double pocket: Open pocket and 3 pen compartments • Mic tabs on both sides
H
p
s
k e ts Plu
P
oc
MD
Meets ANSI/ISEA 107 Requirements
See Page 4
49
Aware Wear - Vests
Aware Wear - Vests | Multi-Pocket Multi-Pocket
• 100% polyester mesh • Tape backed by contrasting trim • Right interior pocket • Left interior pocket includes inset pen compartment
SIZE MD
14605
61763
LG
14606
61764
XL
14607
61765
2X
14608
61766
3X
14617
61767
4X
14618
61768
5X
14619
61769
M esh
3
Po c ets k
oc
k e ts Plu
oo
k & Loo
P
s
Contrasting Trim Mesh (Class 2)
H
p
S382
TALL
• 100% polyester mesh • Tape backed by contrasting trim • Right interior pocket • Left interior pocket includes inset pen compartment • 2 inches extra body length than S382 (shown above)
SIZE MD
63500
63507
LG
63501
63508
XL
63502
63509
2X
63503
63510
3X
63504
63511
4X
63505
63512
5X
63506
63513
M esh
3
Po c ets k
oc
k e ts Plu
oo
k & Loo
P
s
Contrasting Trim Mesh
61832
XL
61833
2X
61834
3X
61835
4X
61836
5X
61837
ck
61831
LG
Ba
MD
To p & Fr o n t
h
• 100% polyester tricot with mesh top panels on front and back • Reflective tape backed by contrasting orange trim • Right chest pocket, 2 divisions • Left chest pocket, 4 divisions • 2 exterior waist pockets with hook & loop closure • 2 interior large open waist pockets
SIZE M es
Solid Contrasting Trim Mesh (Class 2)
to m r o nt F
&
S o li d B
S149
Back
H
ot
p
(Class 2)
10
Po c ets k
P
oc
k e ts Plu
s
S382T
Zip p er
Meets ANSI/ISEA 107 Requirements
50
Vests - Aware Wear
Multi-Pocket Best Seller SIZE
M esh
6
Po c ets k
k e ts Plu
s
P
oc
SM
61814
61822 NEW!
MD
61815
61823
LG
61816
61824
XL
61817
61825
2X
61818
61826
3X
61819
61827
4X
61820
61828
5X
61821
61829
62151
62158
LG
62152
62159
XL
62153
62160
2X
62154
62161
3X
62155
62162
4X
62156
62163
5X
62157
62164
S383P
(Class 2)
Contrasting Trim Mesh
• 100% polyester mesh • 2” silver reflective tape backed by contrasting trim • 2 exterior waist pockets with hook & loop closure • 2 exterior chest pockets with hook & loop closure • 2 interior waist pockets • Mic tabs on both sides
Zip p er
So
li d F r o n
t
SIZE MD M
esh B ack
11
Po c ets k
Solid Front Mesh Back Surveyor (Class 2)
• 100% polyester tricot front with mesh back • 2” silver reflective tape backed by contrasting trim • 1 split pad/pencil pocket • 1 flapped gusseted radio pocket, 2 exterior waist pockets flapped with hook & loop closure • 2 interior open waist pockets, 1 interior flashlight pocket • Mic tabs on both sides
k e ts Plu
s
P
oc
S380
Zip p er
NEW! SIZE MD
S o li d
11
Po c ets k
62377
LG
62371
62378
XL
62372
62379
2X
62373
62380
3X
62374
62381
4X
62375
62382
5X
62376
62383
S380SC
Surveyor (Class 2)
• 100% polyester tricot • 2” silver reflective tape backed by contrasting trim • 1 split pad/pencil pocket • 1 flapped gusseted radio pocket, 2 exterior waist pockets flapped with hook & loop closure • 2 interior open waist pockets, 1 interior flashlight pocket • Mic tabs on both sides
k e ts Plu
s
P
oc
62370
Zip p er
Meets ANSI/ISEA 107 Requirements
51
Aware Wear - Vests
Multi-Pocket
Grometted lapel
S252C
(Class 2) Padded Neck
Surveyor/Multi-Pocket
t
esh B ack
15
Po c ets k
oc
k e ts Plu
SIZE
Large back pocket with side zipper access Grommeted pocket
S414
Surveyor/Multi-Pocket (Class 2)
62384
62392
62385
62393
LG
62386
62394
XL
62387
62395
2X
62388
62396
3X
62389
62397
4X
62390
62398
5X
62391
62399
MD
61200
61208
LG
61201
61209
XL
61202
61210
2X
61203
61211
3X
61204
61212
4X
61205
61213
5X
61206
61214
Zip p er
SIZE
S o li d
12
Po c ets k
oc
P
• 100% polyester oxford • 2 open interior waist pockets • Left interior waist pen compartment • Right exterior chest 4 divisions • Exterior left chest double pocket: Open pocket and 4 pen compartments • Mic tabs on both sides
SM MD
k e ts Plu
s
Back pocket zippered both sides
Spray can pockets with elastic cinch both sides
M
li d F r o n
P
• Solid front, mesh back • Reinforced zipper • 2 exterior flapped waist pockets with hook & loop closure • 2 exterior waist, elastic cinch, spray can pockets • 2 flapped chest pockets one with hook & loop closure and 4 tiered pen compartments • 2 interior waist pockets with full zipper closure • 2 interior waist pockets with heavy duty hook & loop security clasp • 2 lapel grommets and 2 left waist pocket grommets • Large back pocket with left and right zipper access • Mic tabs on both sides
So
s
NEW!
Aware Wear - Vests | Multi-Pocket
Zip p er
Unisex
S730
Unisex with Hi-Viz Pink Trim (Class 2)
• 100% polyester mesh • 2” silver reflective tape backed by contrasting trim • 1 exterior left chest pocket with pen compartment • 2 exterior waist pockets with hook & loop closure
SIZE MD
63322
LG
63323
XL
63324
2X
63325
3X
63326
4X
63327
5X
63328
M esh
4
Po c ets k
H
oo
Meets ANSI/ISEA 107 Requirements
52
k & Loo
p
Aware Wear - Vests
Multi-Pocket | Vests - Aware Wear Multi-Pocket
SIZE
M esh
MD
7
Po c ets k
k e ts Plu
61880
LG
61874
61881
XL
61875
61882
2X
61876
61883
3X
61877
61884
4X
61878
61885
5X
61879
61886
61000
61010
LG
61001
61011
XL
61002
61012
2X
61003
61013
3X
61004
61014
4X
61005
61015
5X
61006
61016
61710
61719
LG
61711
61720
XL
61712
61721
2X
61713
61722
3X
61714
61723
4X
61715
61724
5X
61716
61725
S169
Surveyor/Multi-Pocket (Class 2)
• 100% polyester mesh • Left chest radio pocket flapped with hook & loop closure with gusset • Right interior chest double pocket: One open and one 4 divisions • Left interior open pocket
s
P
oc
61873
Vests - Aware Wear
Zip p er
SIZE MD S o li d
3
Po c ets k
oo
k & Loo
p
H
SIZE MD
S o li d
3
Po c ets k
S388Z
Oxford (Class 2)
• 100% polyester oxford • 2 open interior waist pockets • Left pocket includes inset pen compartment
k e ts Plu
s
P
oc
Oxford (Class 2)
• 100% polyester oxford • 2 open interior waist pockets • Left pocket includes inset pen compartment
s
k e ts Plu
P
oc
S388
Unisex | Class 2 Vests - Aware Wear
Zip p er
SIZE
M esh
4
Po c ets k
MD
63166
LG
63167
XL
63168
2X
63169
3X
63170
4X
63171
5X
63172
S381
D-Ring (Class 2)
• 100% polyester mesh • Fall Protection D-Ring slot on back • Zipper front closure • 2 exterior waist pockets flapped with hook & loop closure • Exterior chest pockets • Mic tabs on both sides
Zip p er
Meets ANSI/ISEA 107 Requirements
53
Aware Wear - Vests
d
ro
So
nt
Multi-Pocket
B o tt o m F
li
• 100% polyester mesh with lower solid front • 2 lapel grommets and one left pocket grommet • Large clipboard pocket on back side with left and right zipper access • Exterior right chest radio pocket with 1” gusset • Exterior left chest pocket with 4 divisions • 2 large exterior waist pockets flapped with hook & loop closure • 2 large interior waist pockets with hook & loop closure • Reinforced zipper • Mic tabs on both sides
61231
LG
61232
XL
61233
2X
61234
3X
61235
4X
61236
5X
61237
Ba
ck
MD
h
To p & Fr o n t
10
Po c ets k
oc
k e ts Plu
P
s
Premium Surveyor with Grommets and Clipboard/Tablet Pocket (Class 2)
M es
S251
SIZE
Zip p er
S205
Surveyor with Clipboard/Tablet Pocket (Class 2)
So
SIZE
• 100% polyester tricot front with mesh back • Large clipboard pocket on back side with left and right zipper access • Exterior right chest cell phone pocket flapped with hook & loop closure with gusset • Exterior left chest 2 tier pocket: 1 open pocket, second pocket is 3 divisions • 2 interior waist pockets • Mic tabs on both sides
MD
61223
LG
61224
XL
61225
2X
61226
3X
61227
4X
61228
5X
61229
M
li d F r o n
t
esh B ack
8
Po c ets k
oc
P
s
k e ts Plu
Zip p er
Expandable Fit (Class 2)
• 100% polyester tricot front with mesh back • Hook & loop front closure • 2” silver reflective tape backed by contrasting orange trim • Interior left chest double pocket. One open and one with 4 divisions • One Size Fits Most (adjusts from size Medium to size 5X) • Mic tabs on both sides
SIZE One size fits most
61859
61872
So
M
li d F r o n
esh B ack
5
Po c ets k
H
oo
Meets ANSI/ISEA 107 Requirements
54
t
k & Loo
p
S156
| Vests - Aware Wear
SIZE
M esh
MD
3
Po c ets k
oo
k & Loo
LG
14511
14519
XL
14512
14520
2X
14513
14521
3X
14514
14522
4X
14515
14523
5X
14516
14524
6X
14517
14525
14625
14633
LG
14626
14634
XL
14627
14635
2X
14628
14636
3X
14629
14637
4X
14630
14638
5X
14631
14639
6X
14632
14640
SIZE MD M esh
3
Po c ets k
Mesh (Class 2)
• 100% polyester mesh • Right interior pocket • Left interior pocket includes inset pen compartment
S15Z
Mesh (Class 2)
• 100% polyester mesh • Right interior pocket • Left interior pocket includes inset pen compartment
k e ts Plu
s
P
oc
S15
p
H
14518
s
k e ts Plu
P
oc
14510
Zip p er
SIZE S o li d
0
Po c ets k
14530
LG
14531
XL
14532
2X
14533
3X
14653
4X
14654
5X
14655
S17
High Gloss Trim (Class 2)
• 100% polyester oxford • No pockets
k & Loo
p
H
oo
MD
S o li d
SIZE
3
Po c ets k
oo
k & Loo
14538
LG
14539
XL
14540
2X
14541
3X
14645
4X
14646
5X
14647
S17P High Gloss Trim (Class 2) • 100% polyester oxford • Right interior pocket • Left interior pocket includes inset pen compartment
H
p
s
k e ts Plu
P
oc
MD
Meets ANSI/ISEA 107 Requirements
55
S150Z
with zipper
me
an
Fla
NEW!
t
Aware Wear - Vests | Flame Resistant R e sis
t
S150 S150Z
(Class 2)
NEW! Flame Resistant Solid
• Flame resistant Modacrylic/Aramid blend • Complies with the requirements of ANSI/ISEA 107-2015 for an FR garment • Meets ASTM F-1506 (ATPv 5.5 cals/cm2) • 2” flame resistant Oralite® reflective material, FR binding and thread • 2 interior waist pockets • Interior left chest pocket includes 1 pen compartment
SIZE
S150Z
S150
MD
61950
63121
LG
61951
63122
XL
61952
63123
2X
61953
63124
3X
61954
63125
4X
61955
63126
5X
61956
63127
S o li d
4
Po c ets k
Zip p er
OR
Flame Resistant Solid (Class 2)
• Same as the S150Z except with hook & loop closure
H
oo
NEW!
S152Z
with zipper
S152 S152Z
(Class 2)
k & Loo
p
S150
NEW! Flame Resistant Mesh
• Flame resistant Modacrylic/Aramid blend mesh • Complies with the requirements of ANSI/ISEA 107-2015 for an FR garment • Meets ASTM F-1506 (ATPv 4.6 cals/cm2) • 2” flame resistant Oralite® reflective material, FR binding and thread • 2 interior waist pockets • Interior left chest pocket includes 1 pen compartment
SIZE
S152Z
S152
MD
61957
61263
LG
61958
61264
XL
61959
61265
2X
61960
61266
3X
61961
61267
4X
61962
61268
5X
61963
61269
M esh
4
Po c ets k
Zip p er
OR
S152
56
Meets ANSI/ISEA 107 Requirements
MD
61255
seye Kn
LG
61256
XL
61257
2X
61258
3X
61259
4X
61260
5X
61261
it
p
ir d
4
Po c ets k
oo
k & Loo
An
ti S t a ti c
H
• Flame resistant Modacrylic/Para-Aramid/ Nega-Stat® blend mesh • Complies with the requirements of ANSI/ISEA 107-2015 for an FR garment • Meets ASTM F-1506 (ATPv 5.2 cals/cm2) • Background material meets EN1149 anti static requirements • 2” flame resistant Oralite® reflective material, FR binding and thread • 2 interior waist pockets • Interior left chest pocket includes 1 pen compartment
SIZE
B
Flame Resistant Anti Static Mesh (Class 2)
k & Loo
p
• Same as the S152Z except with hook & loop closure
S153
oo
H
Flame Resistant Mesh (Class 2)
Flame Resistant | Vests - Aware WFlame ear Retardant | Vests - Aware Wear
These flame retardant garments do not meet criteria for Flame Resistant garments as defined by ANSI/ISEA 107
SIZE
S o li d
4
Po c ets k
65010
65017
LG
65011
65018
XL
65012
65019
2X
65013
65020
3X
65014
65021
4X
65015
65022
5X
65016
65023
S190
Flame Retardant Treated Background Material (Class 2)
• Flame retardant treated 100% polyester tricot • 2 exterior waist pockets, 1 interior chest pocket, including 1 interior pen pocket • Does not comply with the flame resistant requirements of ANSI/ISEA 107-2015 Standard as an FR garment
k & Loo
p
H
oo
MD
S365
Retardant Treated Background Material with Flame Resistant Components (Class 2)
SIZE S o li d
4
Po c ets k
oo
k & Loo
61360
LG
61361
XL
61362
2X
61363
3X
61364
4X
61365
5X
61366
• Flame retardant treated 100% polyester tricot • Flame resistant (FR) components include thread and 3M 8935 Silver Industrial Wash Flame Resistant fabric • 2 exterior waist pockets flapped with hook & loop closure • Interior left chest pocket includes 1 pen compartment • Does not comply with the flame resistant requirements of ANSI/ISEA 107-2015 Standard as an FR garment
H
p
s
k e ts Plu
P
oc
MD
ANSI/ISEA 107-2015 Flame Resistant vs. Flame Retardant
Flame Resistant apparel are garments which are tested and meet various industry standards that require self-extinguishment of the garment after exposure to flames, sparks and more. Garments labeled under the ANSI 107-2015 Standard shall state that flame retardant garments do not provide fire protection. Flame Retardant is a chemical used to treat materials for self-extinguishment which may or may not meet any accepted industry standards. Caution: Logos applied to Flame Retardant treated fabrics may decrease the effectiveness of the garment’s flame retardant properties. ANSI/ISEA 107-2015 uses the term Flame Resistance for high visibility garments which fully meet one or more of the following standards:
-ASTM F1506
-ASTM F1891 -NFPA 1971
-ASTM F2302 -NFPA 1977
-ATSM F2733 -NFPA 2112
WARNING: Purchasing a vest requires careful selection to ascertain if the garment will protect a worker from sources of heat or ignition that may be present in the work zone. Some commercially available garments listed as FR treated may not give the level of protection called for by the ANSI/ISEA standard, and may not last for more than one wear/wash cycle, nor may all components have flame resistant properties even if the label states that it meets ANSI/ISEA 107. The label must indicate one of the foregoing ASTM or NFPA standards to be considered Flame Resistant under the ANSI/ISEA 107 standard.
ERB Safety ANSI/ISEA 107 2015 Update – Labeling changes are underway on all Aware Wear Flame Resistant and Flame Retardant vests. All flame resistant vests meet the performance criteria of ANSI/ISEA 107-2015 except for required labeling. Note: To prolong life of flame retardant treatment, do not wash. Meets ANSI/ISEA 107 Requirements
57
Aware Wear - Vests
• 100% polyester mesh • No pockets
SIZE MD
14550
14558
LG
14551
14559
XL
14552
14560
2X
14553
14561
3X
14554
14562
4X
14555
14563
5X
14556
14564
M esh
0
Po c ets k
H
oo
S663P
Best Value (Class 3)
• 100% polyester mesh • 2 exterior waist pockets with hook & loop closure • Right exterior chest radio/phone pocket flapped with hook & loop closure with gusset • Left exterior chest pocket
k & Loo
p
Economy Mesh Vest (Class 3)
SIZE MD
61887
61936
LG
61888
61937
XL
61889
61938
2X
61890
61939
3X
61891
61940
4X
61892
61941
5X
61893
61942
M esh
4
Po c ets k
P
oc
k e ts Plu
s
S662
Zip p er
Vest (Class 3)
• 100% polyester mesh • Zipper front closure • 1 waist level, interior left open pocket with hook & loop closure
SIZE MD
28881
LG
28882
XL
28883
2X
28884
3X
28885
4X
28886
5X
28887
M esh
1 Po c k et
P
oc
k e ts Plu
s
S6631P
Zip p er
Meets ANSI/ISEA 107 Requirements
58
Vests - Aware Wear
So
li d F r o n
t
SIZE M
esh Ba
ck
11 3
Po c ets k
65040
65048
LG
65041
65049
XL
65042
65050
2X
65043
65051
3X
65044
65052
4X
65045
65053
5X
65046
65054
k e ts Plu
s
P
oc
MD
S680
Solid Front Mesh Back Surveyor (Class 3)
• 100% polyester tricot front with mesh back • 2” silver reflective tape backed by contrasting trim • 1 split pad/pencil pocket • 1 radio pocket, 2 exterior waist pockets flapped with hook & loop closure • 2 interior open waist pockets, 1 interior waist pocket, 1 interior flashlight pocket • Mic tabs on both sides
Zip p er
S682P
SIZE M esh
3
Po c ets k
oo
M k e&s hL o o
14609
LG
14610
XL
14611
2X
14612
3X
14613
4X
14614
5X
14615
(Class 3)
• 100% polyester mesh • Right interior waist pocket • Left interior waist pocket includes inset pen compartment
p
H
SIZE M esh
6
Po c ets k
k e ts Plu
s
P
oc
Contrasting Trim
ps
kk e&t s LPol ou
PH
o co
MD
SM
62150
—
MD
62136
62143
LG
62137
62144
XL
62138
62145
2X
62139
62146
3X
62140
62147
4X
62141
62148
5X
62142
62149
S683P
(Class 3)
Contrasting Trim
• 100% polyester mesh • 2” silver reflective material backed by contrasting trim • 2 exterior waist pockets with hook & loop closure • Zipper front closure • 2 exterior chest pockets • 2 interior waist pockets • Mic tabs on both sides
Zip p er
Meets ANSI/ISEA 107 Requirements
59
Aware Wear - Vests
BREAK-AWAY
61239
LG
61240
XL
61241
2X
61242
3X
61243
4X
61244
5X
61245
M esh
2
Po c ets k
H
oo
S622
5-Point Break-Away (Class 3)
• 100% polyester mesh • 2” silver reflective tape backed by contrasting trim • 2 interior waist pockets with hook & loop closure • Mic tab on left side
SIZE MD
63247
LG
63248
XL
63249
2X
63250
3X
63251
4X
63252
5X
63253
M esh
2
Po c ets k
H
oo
S661
5-Point Break-Away D-Ring (Class 3)
• 100% polyester tricot • Fall Protection D-Ring slot on back – slot located 4” down from the neck line • 2 waist level exterior pockets flapped with hook & loop closure • Exterior left chest pocket including open pocket and 3 division pockets • Mic tabs on both sides
MD
61929
LG
61930
XL
61931
2X
61932
3X
61933
4X
61934
5X
61935
S o li d
6
Po c ets k
oc
k e ts Plu
oo
k & Loo
H
60
k & Loo
SIZE
P
Meets ANSI/ISEA 107 Requirements
k & Loo
p
MD
p
• 100% polyester mesh • 2 interior waist pockets with hook & loop closure
SIZE
s
5-Point Break-Away (Class 3)
p
S620
Vests - Aware Wear
S601X
SIZE S o li d
2
Po c ets k
k e ts Plu
oo
k & Loo
So
li d F r o n
MD
61901
LG
61902
XL
61903
2X
61904
3X
61905
4X
61906
5X
61907
H
p
P
SIZE
M
X-Back (Class 3)
• 100% polyester tricot • X on back helps indicate which way wearer is facing • 2 exterior waist pockets with hook & loop closure • Mic tabs on both sides
s
oc
Vests - Aware Wear
t
esh B ack
8
MD
61611
LG
61612
XL
61613
2X
61614
3X
61615
4X
61616
5X
61617
S852
Multi-Pocket (Class 3)
• 100% polyester oxford front • 100% polyester mesh back • Right exterior chest radio/phone pocket flapped with hook & loop closure with gusset • 2 exterior pockets with hook & loop closure • Left exterior chest double pocket: 1 open pocket with hook & loop closure, second pocket has 4 pen compartments • Mic tabs on both sides
Po c ets k
Zip p er
Meets ANSI/ISEA 107 Requirements
See Page 11
61
Aware Wear - Non ANSI Vests
S18
Non ANSI Economy
• 100% polyester mesh • Durable elastic side straps
SIZE One Size Fits Most
14603
14600
M esh
0
Po c ets k
Non ANSI Reflective Economy
SIZE One Size Fits Most
14602
14601
• 100% polyester mesh • Durable elastic side straps • 1” wide high gloss reflective trim
M esh
0
Po c ets k
H
oo
S19
Non ANSI Tight Weave
• 100% tightly knit polyester • Durable elastic side straps • Tight knit construction allows for excellent screen printing - call for quote
k & Loo
p
S18R
k & Loo
p
H
oo
SIZE One Size Fits Most
14098
14099
M esh
0
Po c ets k
62
k & Loo
p
H
oo
Non ANSI Vests - Aware Wear
SIZE One Size Fits Most
M esh
14620
14621
S22R Non ANSI Reflective Economy • 100% polyester mesh • Durable elastic side straps • 1” wide silver reflective tape
0
Po c ets k
o li
d B o tt o m
p
k & Loo
H
oo
S
M e s To p h
10
Po c ets k
k e ts Plu
s
P
oc
SIZE XS
61318
SM
61319
MD
61320
LG
61321
XL
61322
2X
61323
3X
61324
4X
61325
5X
61326
S410
Non ANSI Surveyor’s Vest
• 100% polyester tricot with mesh top panels on front and back • 2 interior large open waist pockets • 2 exterior waist pockets flapped with hook & loop closure • Right chest pocket, 2 divisions • Left chest pocket, 4 divisions
Zip p er
SIZE S o li d
10
Po c ets k
61748
LG
61749
XL
61750
2X
61751
3X
61752
4X
61753
5X
61754
S103
Non ANSI Surveyor’s Vest
• 100% polyester tricot • 2 interior large waist open pockets • 2 exterior waist pockets flapped with hook & loop closure • Right chest pocket, 2 divisions • Left chest pocket, 4 divisions • Great for decoration
k e ts Plu
s
P
oc
MD
Zip p er
63
Aware Wear - Non ANSI Vests
CERT Green
• 100% polyester tricot • 2 exterior open waist pockets • Right chest pocket with hook & loop closure • Adjustable hook & loop side straps • Badge/ID holder receptacle on right chest • 2” High gloss tape
SIZE One Size Fits Most
61703
S o li d
3
Po c ets k
H
oo
k & Loo
p
S179
NEW!
62470 62471
LG
62472
XL
62473
2X
62474
3X
62475
4X
62476
5X
62477
10
Po c ets k
oc
k e ts Plu
oo
k & Loo
H
S530
Expandable
S903
Economy Long
• 100% polyester mesh • Durable elastic side straps • Contrasting trim for additional visibility
SIZE MD/LG
61252
61731
XL/2X
61253
61732
M esh
5
Po c ets k
oo
H
• 100% polyester mesh • Left interior 2 tier pocket: One open, one with 4 divisions • Reflective tape backed by contrasting trim • Navy blue meets certain industry specs • Expandable fit • Mic tabs on both sides • Available in Navy or Red
s
SM MD
P
• 100% polyester tricot • 2 exterior flapped waist pockets with hook & loop closure • 1” high gloss tape backed by contrasting trim • Left chest 4 pen pocket • Right chest split utility pocket • 2 interior open pockets • CERT logo on front and back
S o li d
SIZE
p
Surveyor CERT Green
SIZE One Size Fits Most
k & Loo
p
S813
M esh
61667
0
Po c ets k
64
k & Loo
p
H
oo
Public Safety Vests - Aware Wear
M e s To p h
SIZE
o li
S
d B o tt o m
MD/XL
61247
61249
2X/5X
61248
61250
3
Po c ets k
p
Ve
b
S afety
So
li d F r o n
t
SIZE
esh B ack
5
Po c ets k
61216
LG
61217
XL
61218
2X
61219
3X
61220
4X
61221
5X
61222
5-Point Break-Away (Type P, Class 2)
• 100% polyester tricot front panel • 100% polyester mesh back panel • Adjustable front closure • 2” silver reflective tape backed by contrasting orange trim • Interior left chest double pocket: Open pocket and 4 pen compartments • Mic tabs on both sides
p
Ve
b
S afety
SIZE S o li d
6
Po c ets k
61301
XL/2X
61302
3X/4X
61303
5X/6X
61304
S368
5-Point Break-Away (Type P, Class 2)
• 100% polyester tricot • Left interior waist pocket with hook & loop closure • Left exterior chest double pocket: Open pocket and 3 pen compartments • Right exterior chest radio/phone pocket flapped with hook & loop closure with gusset • 4.5” wide hook & loop side closure for adjustable sizing • 2” 3MTM ScotchliteTM Reflective Material backed by black contrasting trim • Extended tail • Mic tabs on both sides
Pu
st
p
k & Loo
MD/LG
b
Ve
H
oo
S345
k & Loo
Pu
li c
MD
st
H
oo
li c
• 100% polyester mesh top with tricot bottom • Left exterior chest pen pocket • 2 interior waist pockets • Reflective trim backed by hi-viz lime tricot • Expandable fit • Mic tabs on both sides • Available in Royal Blue or Red
k & Loo
Pu
li c
M
5-Point Break-Away (Type P, Class 2)
st
H
oo
S340
S afety
Meets ANSI/ISEA 107 Requirements
65
Aware Wear - T-Shirts | Birdseye Knit
• 100% Polyester Birdseye knit mesh • Background material conforms to ANSI/ISEA 107 standard for chromaticity and luminance • Left chest pocket • Moisture wicking • Does not meet ANSI/ISEA 107
XL
64020
2X
64021
3X
64022
4X
64023
5X
64024
seye Kn
it
64019
1 Po c k et
ng
& Eva po
ir d
seye Kn
61677
LG
61671
61678
XL
61672
61679
2X
61673
61680
3X
61674
61681
4X
61675
61682
5X
61676
61683
MD
63048
63041
LG
63049
63042
1 Po c k et
ti o n
61669
61670
i
61668
W ic k
SM MD
it
SIZE B
• 100% Polyester Birdseye knit mesh • Left chest pocket • Moisture wicking
LG
ir d
i
(Class 2)
Short Sleeve
64018
W ic k
9006S
MD
ti o n
SIZE
ra
Non ANSI Short Sleeve
B
9006
seye Kn
ng
& Eva po
ir d
seye Kn
ra
B
ir d
it
Aware Wear - Short Sleeve T-Shirts
TALL
XL
63050
63043
2X
63051
63044
3X
63052
63045
4X
63053
63046
5X
63054
63047 W ic k
i
ng
Meets ANSI/ISEA 107 Requirements
66
it
1 Po c k et
ti o n
• 100% Polyester Birdseye knit mesh • Left chest pocket • Moisture wicking • 1 Inch extra sleeve length • 2 Inches extra body length than 9006S
SIZE B
(Class 2)
Short Sleeve
ra
9006ST
& Eva po
Birdseye Knit | T-Shirts - Aware Wear Short Sleeve T-Shirts - Aware Wear B
ir d
9006SX
SIZE seye Kn
it
MD LG
62182
62190
1
XL
62183
62191
2X
62184
62192
Po c k et
3X
62185
62193
4X
62186
62194
5X
62187
62195
i
ng
& Ev
(Class 2)
• 100% Polyester Birdseye knit mesh • X on back helps indicate which way wearer is facing • Left chest pocket • Moisture wicking
a po
So
l
id
So
n it
SIZE id
l
K J ersey
1
MD
i
61772
LG
14108
61773
XL
14109
61774
2X
14110
61775
3X
14210
61776
4X
14211
61777
5X
14212
61778
14111
61781
LG
14112
61782
XL
14113
61783
2X
14114
61784
3X
14115
61785
4X
14116
61786
5X
14130
61787
n it
So
l
J ersey
K
1
Non ANSI Short Sleeve
• 100% polyester jersey knit • Background material conforms to ANSI/ISEA 107 standard for chromaticity and luminance • Left chest pocket • Moisture wicking • Does not meet ANSI/ISEA 107
MD
9601S
(Class 2)
Short Sleeve
• 100% polyester jersey knit • Left chest pocket • Moisture wicking
i
ra
W ic k
ti o n
Po c k et
ng
9601
& Eva po
SIZE id
K
ra
W ic k
14107
J ersey
ti o n
Po c k et
ng
X-Back Short Sleeve
ra
W ic k
ti o n
62189
B
62181
n it
ir d
seye Kn
it
& Eva po
Meets ANSI/ISEA 107 Requirements
67
Aware Wear - T-Shirts | Jersey Knit
• 100% polyester jersey knit • Black bottom • Left chest pocket • Moisture wicking
63307
63315
LG
63308
63316
XL
63309
63317
2X
63310
63318
3X
63311
63319
4X
63312
63320
5X
63313
63321
id
J ersey
K
1 Po c k et
W ic k
MD
n it
SIZE
l
Short Sleeve
So
(Class 2)
K
i
ng
ti o n
l
9604S
J ersey
ra
So
id
n it
Aware Wear - Short Sleeve T-Shirts
& Eva po
NEW!
63608
n it
63607
63601
id
J ersey
XL
63602
63609
2X
63603
63610
3X
63604
63611
4X
63605
63612
5X
63606
63613
1 Po c k et
W ic k
i
ng
• 100% polyester jersey knit • Left chest pocket • Moisture wicking
MD
61278
61270
LG
61279
61271
XL
61280
61272
2X
61281
61273
3X
61282
61274
4X
61283
61275
5X
61284
61276
n it
SIZE id
J ersey
1 W ic k
i
68
K
Po c k et
ng
Meets ANSI/ISEA 107 Requirements
& Eva po
ti o n
Short Sleeve
l
(Class 3)
So
9801S
K
ti o n
63600
LG
ra
MD
l
• 100% polyester jersey knit • Contrasting trim • Black bottom • Left chest pocket • Moisture wicking
SIZE So
Short Sleeve Contrasting Trim (Class 2)
ra
9604SBC
& Eva po
So
l
id
n it
l
1
Polo (Class 2)
LG
61466
XL
61467
2X
61468
3X
61469
4X
61470
5X
61471
• 100% polyester jersey knit • 3 button closure • Moisture wicking
i
ra
W ic k
ng
61465
ti o n
Po c k et
MD
& Eva po
B
ir d
MD
64026
LG
64027
1
XL
64028
2X
64029
Po c k et
3X
64030
4X
64031
5X
64032
it ti o n
W ic k
i
& Eva po
SIZE seye Kn
it
B
ir d
1
SM
64000
64008
MD
64001
64009
LG
64002
64010
XL
64003
64011
2X
64004
64012
3X
64005
64013
4X
64006
64014
5X
64007
64015
9007S
(Class 2)
Long Sleeve
• 100% Polyester Birdseye knit mesh • Left chest pocket • Moisture wicking
i
ra
W ic k
ti o n
Po c k et
ng
Non ANSI Long Sleeve
• 100% Polyester Birdseye knit mesh • Left chest pocket • Moisture wicking • Background material conforms to ANSI/ISEA 107 standard for chromaticity and luminance • Does not meet ANSI/ISEA 107
ra
B
ng
seye
Kn
seye Kn
9007
SIZE ir d
K
it
So
K J ersey
J ersey
S369
SIZE id
n it
Jersey Knit | T-Shirts - Aware ear & Long Sleeve T-Shirts - Aware Wear PoloW Shirt
& Eva po
Meets ANSI/ISEA 107 Requirements
69
61791
XL
14119
61792
2X
14120
61793
3X
14131
61794
4X
14132
61795
5X
14133
61796
id
J ersey
1 Po c k et
W ic k
i
ng
14121
61799
LG
14122
61800
XL
14123
61801
2X
14124
61802
3X
14125
61803
4X
14126
61804
5X
14127
61805
n it
MD
id
J ersey
l
• 100% polyester jersey knit • Left chest pocket • Moisture wicking
SIZE
1 Po c k et
W ic k
62122
62129
LG
62123
62130
XL
62124
62131
2X
62125
62132
3X
62126
62133
4X
62127
62134
5X
62128
62135
id
J ersey
1
i
ng
Meets ANSI/ISEA 107 Requirements
70
K
Po c k et
W ic k
MD
l
• 100% polyester jersey knit • Left chest pocket • Moisture wicking
SIZE
So
(Class 3)
Long Sleeve
& Eva po
n it
i
ng
9802S
K
ti o n
Long Sleeve
So
(Class 2)
& Eva po
ra
9602S
K
ti o n
61790
14118
ra
14117
LG
l
MD
n it
SIZE So
Non ANSI Long Sleeve
• 100% polyester jersey knit • Left chest pocket • Moisture wicking • Background material conforms to ANSI/ISEA 107 standard for chromaticity and luminance • Does not meet ANSI/ISEA 107
K
ti o n
l
9602
J ersey
ra
So
id
n it
Aware Wear - Long Sleeve T-Shirts
& Eva po
So
So
n it
l
id
id
K J ersey
SIZE 64042
LG
64035
64043
1
XL
64036
64044
2X
64037
64045
Po c k et
3X
64038
64046
4X
64039
64047
5X
64040
64048
i
ng
& Ev
J ersey
K
9804S
(Class 3)
Long Sleeve
• 100% polyester jersey knit • Left chest pocket • Moisture wicking
ra
W ic k
ti o n
64034
l
MD
n it
Jersey Knit | T-Shirts - ALong ware Sleeve Wear T-Shirts & Work Pants - Aware Wear
a po
NEW! So
n it
SIZE id
MD
63614
63621
LG
63615
63622
1
XL
63616
63623
2X
63617
63624
Po c k et
3X
63618
63625
4X
63619
63626
5X
63620
63627
ti o n
W ic k
i
ng
9804SBC
Long Sleeve Contrasting Trim (Class 3)
• 100% polyester jersey knit • Contrasting Trim • Left chest pocket • Moisture wicking
ra
l
K J ersey
& Eva po
Work Pants SIZE
S o li d
it P o c k e t
s
Sl
2
LG
14546
14566
XL
14547
14567
2X
14548
14568
3X
14549
14569
4X
14574
14570
5X
14575
14571
65024
65032
LG
65025
65033
XL
65026
65034
2X
65027
65035
3X
65028
65036
4X
65029
65037
5X
65030
65038
SIZE MD M esh
2
B
ac
s
it P o c k e t
2
k Pocke
Work Pant
• 100% polyester lightweight oxford fabric • Elastic waist • Pass through pocket slits • Pocket slits have hook & loop closure • Class E (for Ensemble) when worn without other ANSI 107 compliant garments • Class 3 when worn with a Class 2 or Class 3 upper garment
S210
Mesh Work Pant
• 100% polyester mesh • Front pass through pockets with rain guard • 2 back pockets with hook & loop closure • Elastic waist with drawstring • Zipper at leg opening • Class E (for Ensemble) when worn without other ANSI 107 compliant garments • Class 3 when worn with a Class 2 or Class 3 upper garment
t
s
Sl
S21
Meets ANSI/ISEA 107 Requirements
71
Aware Wear - Cold Weather Wear
COLD WEATHER WEAR Shown with hood attached
W144
(Class 3)
Black Bottom Parka
• 100% polyester 300D oxford with PU coating • Zipper and snap front closure • Quilted padded lining • Interior waist drawstring • Detachable and stowable hood • Left inside chest pocket • 2 exterior waist flapped pockets with hook & loop closure • Meets all levels of water protection, up to and including “water proof” per ANSI/ISEA 107
SIZE
62016
2X
62017
3X
62018
4X
62019
5X
62020
3
Po c ets k
oc
k e ts Plu
Zip p er
W
ater Proo
f
62015
XL
s
62014
LG
P
MD
Meets ANSI/ISEA 107 Requirements
72
Jackets - Aware Wear
NEW!
4
SIZE
Po c ets k
k e ts Plu
63945
63953
LG
63946
63954
XL
63947
63955
2X
63948
63956
3X
63949
63957
4X
63950
63958
5X
63951
63959
s
P
oc
MD
Zip p er
ater Proo
f
W
W105
(Class 3)
Value Bomber Jacket
• 100% polyester 300D oxford with PU coating • Mic tabs on both sides • Zipper front closure • Comfort collar, fleece lined • 2 exterior slash pockets • Right exterior radio/cell phone pocket with hook & loop flapped closure • Left chest interior pocket with hook & loop closure • Polyfill quilted lining • Meets all levels of water protection, up to and including “water proof” per ANSI/ISEA 107
Shown with hood attached
SIZE
3
Po c ets k
k e ts Plu
s
P
oc
MD
61591
61602
LG
61592
61603
XL
61593
61604
2X
61594
61605
3X
61595
61606
4X
61596
61607
5X
61597
61608
Zip p er
ater Proo
f
W
W106 Bomber Jacket with Storm Flap and Hood (Class 3) • 100% polyester 300D oxford with PU coating • Zipper and snap front closure • 100% black polyester fleece liner • Left interior chest pocket • 2 exterior slash pockets with rain guard • Meets all levels of water protection, up to and including “water proof” per ANSI/ISEA 107 • Detachable and stowable hood • Mic tabs on both sides • Adjustable cuffs
TALL SIZE
3
Po c ets k
k e ts Plu
s
P
oc
Zip p er
ater Proo
f
W
MD
62165
62173
LG
62166
62174
XL
62167
62175
2X
62168
62176
3X
62169
62177
4X
62170
62178
5X
62171
62179
Shown with hood attached
W106T Bomber Jacket with Storm Flap and Hood (Class 3) • 100% polyester 300D oxford with PU coating • Zipper and snap front closure • 100% black polyester fleece liner • Left interior chest pocket • 2 exterior slash pockets with rain guard • 2” additional body length • 1” additional sleeve length • Meets all levels of water protection, up to and including “water proof” per ANSI/ISEA 107 • Detachable and stowable hood • Mic tabs on both sides • Adjustable cuffs
Meets ANSI/ISEA 107 Requirements
73
Aware Wear - Jackets
Aware Wear - Cold Weather Wear
Shown with hood attached
• 100% polyester 300D oxford with PU coating • Zipper and snap front closure • Removable fleece liner with 2 zipper slash pockets • Detachable and stowable hood • Outer shell includes left interior chest pocket, right exterior radio/cell phone pocket and 2 exterior slash pockets with rain guard and zipper closure • Mic tabs on both sides • Adjustable cuffs
SIZE MD
61690
LG
61691
XL
61692
2X
61693
3X
61694
4X
61695
5X
61696
4
Outer Jacket
Po c ets k
2
Fleece Liner
Po c ets k
Zip p er
W
NEW! Shown with hood stowed
W530B (Class 3)
3-in-1 Bomber Jacket
SIZE MD
63345
LG
63346
XL
63347
2X
63348
3X
63349
4X
63350
5X
63351
5
Outer Jacket
Po c ets k
2
Fleece Liner
Po c ets k
oc
P
• 100% polyester 300D oxford with PU coating • Zipper front closure • Comfort collar, fleece lined • Removable fleece liner • Fleece jacket has 2 slash pockets and zipper closure • Fleece jacket all Hi-Viz Lime for professional look • Detachable and stowable hood • Right chest exterior phone/radio pocket • 2 exterior slash pockets with zipper closure • 2 exterior left sleeve pen pockets • Mic tabs on both sides
ater Proo
f
3-in-1 Contrasting Trim Black Bottom Bomber Jacket (Class 3)
k e ts Plu
s
W550
Zip p er
ater Proo
f
W
Shown with hood attached
6
Outer Jacket
MD
62434
LG
62435
XL
62436
2X
62437
3X
62438
4X
62439
5X
62440
3
Fleece Liner
Po c ets k
oc
P
• 100% polyester 300D oxford with PU coating • Zipper front closure • Comfort collar, fleece lined • Removable fleece liner with quilted sleeves • Fleece jacket has 2 slash pockets and right chest zipper pocket • Detachable and stowable hood • Outer shell includes 6 exterior pockets: Right chest vertical zipper, left chest cell phone with hook & loop closure, left sleeve divided pen pocket and 2 slash pockets • Mic tabs on both sides
Po c ets k
Zip p er
W
Meets ANSI/ISEA 107 Requirements
74
k e ts Plu
s
(Class 3)
3-in-1 Bomber Jacket
ater Proo
f
W510
SIZE
Jackets - Aware Wear
SIZE
2
Po c ets k
k e ts Plu
s
P
oc
MD
62203
LG
62204
XL
62205
2X
62206
3X
62207
4X
62208
5X
62209
Zip p er
• Lightweight, multi-season • Rain guard zipper closure with interior storm flap • Comfort collar, fleece lined • 3 fused fabric layers • Breathable, water and wind resistant • Comfortable polyester/spandex outer shell fused with fleece liner • 2 exterior slash pockets with rain guard zipper closure • Channeled hem with cinch cord and cord lock for adjustable fit • Deluxe adjustable cuffs
ater Proo
Po c ets k
MD
62197
LG
62198
XL
62199
2X
62200
3X
62201
k e ts Plu
s
P
oc
Extended jacket tail
SIZE
2
Zip p er
W651
(Class 2)
Women’s Soft Shell Jacket
• Lightweight, multi-season • Rain guard zipper closure with interior storm flap • Comfort collar, fleece lined • 3 fused fabric layers • Breathable, water and wind resistant • Comfortable polyester/spandex outer shell fused with fleece liner • 2 exterior slash pockets with rain guard zipper closure • Channeled hem with cinch cord and cord lock for adjustable fit • Deluxe adjustable cuffs
ater Proo
f
W
Men’s Soft Shell Jacket
f
W
W650
(Class 3)
Women’s jacket with contoured waist
SIZE
2
Po c ets k
k e ts Plu
s
P
oc
MD
61570
LG
61571
XL
61572
2X
61573
3X
61574
4X
61575
5X
61576
Extended jacket tail
S374
Wind Breaker (Class 3)
• 100% polyester pongee • Provides wind resistance and slight water repellency • 2 exterior waist pockets • White lining constructed of 100% polyester with brush tricot finish • Zipper extends to top of collar for added neck protection
Zip p er
Meets ANSI/ISEA 107 Requirements
75
Aware Wear - Sweat Shirts
SWEAT SHIRTS
76
Cold Weather Wear - Aware Wear
Sweat Shirts - Aware Wear NEW!
SIZE
2
Po c ets k
k e ts Plu
63870
LG
63871
XL
63872
2X
63873
3X
63874
4X
63875
5X
63876
s
P
oc
MD
W379B Quarter Zip Sweatshirt (Class 3) • 100% soft polyester fleece • Quarter zipper closure • Large front pass-through hand warmer pocket • 1 left zippered chest pocket • Ribbed knit cuffs
Zip p er
SIZE
0
Po c ets k
MD
62000
LG
62001
XL
62002
2X
62003
3X
62004
4X
62005
5X
62006
W143
(Class 3)
Crewneck Sweatshirt
• 100% soft polyester fleece • Pullover style • No pockets • Ribbed knit cuffs
Meets ANSI/ISEA 107 Requirements
See Page 22
Meets ANSI/ISEA 107 Requirements
77
Aware Wear - Cold Weather Wear | Sweat Shirts
(Class 3)
Zip-Front Sweatshirt
2
SIZE MD
61525 61526
XL
61527
• Channeled hood with cinch cord and cord lock for adjustable fit
2X
61528
3X
61529
• 2 inset slash pockets
4X
61530
• Zipper closure
5X
61531
oc
P
LG
• 100% soft polyester fleece
Po c ets k
• Ribbed knit cuffs
W375B
(W378) Zip-Front Sweatshirt (Class 3)
Zip p er
SIZE MD
62985
LG
62986
XL
62987
2X
62988
3X
62989
4X
62990
5X
62991
2
Po c ets k
oc
P
• 100% soft polyester fleece • Channeled hood with cinch cord and cord lock for adjustable fit • 2 inset slash pockets • Zipper closure • Ribbed knit cuffs
k e ts Plu
s
W375
k e ts Plu
s
Aware Wear - Sweat Shirts
Zip p er
(Class 3)
Pullover Sweatshirt
Pass through pocket
Meets ANSI/ISEA 107 Requirements
78
MD
61540
62235
LG
61541
62236
XL
61542
62237
2X
61543
62238
3X
61544
62239
4X
61545
62240
5X
61546
62241
1 Po c k et
oc
P
• 100% soft polyester fleece • Channeled hood with cinch cord and cord lock for adjustable fit • Large front pass-through hand warmer pocket • Ribbed knit cuffs
SIZE
k e ts Plu
s
W376
Sweat Shirts | Cold Weather Wear - Aware Wear Sweat Shirts - Aware Wear
SIZE
1 Po c k et
k e ts Plu
s
P
oc
MD
61548
LG
61549
XL
61550
2X
61551
3X
61552
4X
61553
5X
61554
W376B
(Class 3)
(W377) Pullover Sweatshirt
• 100% soft polyester fleece • Channeled hood with cinch cord and cord lock for adjustable fit • Large front pass-through hand warmer pocket • Ribbed knit cuffs
Pass through pocket
NEW! SIZE
1 Po c k et
k e ts Plu
s
P
oc
MD
63628
LG
63629
XL
63630
2X
63631
3X
63632
4X
63633
5X
63634
W376C
Pullover Sweatshirt With Contrasting Trim (Class 3)
• 100% soft polyester fleece • Channeled hood with cinch cord and cord lock for adjustable fit • Large front pass-through hand warmer pocket • Ribbed knit cuffs
Pass through pocket
NEW! SIZE
1 Po c k et
k e ts Plu
s
P
oc
MD
63635
LG
63636
XL
63637
2X
63638
3X
63639
4X
63640
5X
63641
W376BC
Pullover Sweatshirt with Contrasting Trim and Black Bottom (Class 3)
• 100% soft polyester fleece • Channeled hood with cinch cord and cord lock for adjustable fit • Large front pass-through hand warmer pocket • Ribbed knit cuffs
Pass through pocket
79
Aware Wear - Rain Wear
RAIN WEAR
80
Aware Wear - Rain Wear
Rain Wear - Aware Wear
Oversized and easy to wear over other garments
S373PT
Rain Pant
• Lightweight 100% polyester oxford with PU coating • Pocket slits on side with rain guard • Snap ankle and fly closure • Class E (for Ensemble) when worn without other ANSI/ISEA 107 compliant garments • Class 3 when worn with a Class 2 or Class 3 upper garment
61500
XL/2X
61496
61501
3X/4X
61497
61502
5X/6X
61498
61503
S373D
0
Po c ets k
W
ater Proo
61510
61518
LG
61511
61519
XL
61512
61520
2X
61513
61521
3X
61514
61522
4X
61515
61523
5X
61516
61524
• 100% polyester 150D oxford with PU coating • Coat length range in size from 30.5” to 33.5” in 1” increments (dual size) • Snap front and wrist closure • Detachable and stowable hood
S373PTB
SIZE MD
Detachable Hood Rain Jacket (Class 3)
Sl
W
Rain Pant
2
it P k e t oc
ater Proo
(S373BTP)
• Lightweight 100% polyester oxford with PU coating • Pocket slits on side with rain guard • Snap ankle and fly closure • Class E (for Ensemble) when worn without other ANSI/ISEA 107 compliant garments • Class 3 when worn with a Class 2 or Class 3 upper garment
SIZE MD/LG
63007
63011
XL/2X
63008
63012
3X/4X
63009
63013
5X/6X
63010
63014
0
Po c ets k
W
ater Proo
Sl
it P k e t oc
W
ater Proo
f
61495
f
• 100% polyester 150D oxford with PU coating • Coat length range in size from 30.5” to 33.5” in 1” increments (dual size) • Snap front and wrist closure • Attached hood
SIZE MD/LG
s
Attached Hood Rain Jacket (Class 3)
f
S373
Shown with hood attached
SIZE MD
63514
63521
LG
63515
63522
XL
63516
63523
2X
63517
63524
3X
63518
63525
4X
63519
63526
5X
63520
63527
2
s
BEST SELLERS
f
Meets ANSI/ISEA 107 Requirements
81
Aware Wear - Rain Wear S371
Rain Coat (Class 3)
• 100% polyester 300D oxford with PU coating • Lining is constructed of 100% polyester mesh for comfort • 2 exterior waist flapped pockets with snap closure. 7” W x 8” D • Coat length range in size from 30” to 33” in .5” increments • Interior waist drawstring • Detachable and stowable hood • Zipper and snap front closure • 1 chest radio/phone pocket flapped with hook & loop closure. 3” W x 5” D with 1” gusset • Vents on back side for breathabililty • Meets all levels of water protection, up to and including “water proof” per ANSI/ISEA 107
Aware Wear - Rain Wear S163
Fully zips for extra protection
Long Rain Coat (Class 3)
• 100% polyester 150D oxford with PU coating • Zipper and snap front closure • Coat length range in size from 50” to 53” in .5” increments • Mesh lining • Detachable and stowable hood • 2 exterior slash pockets with rain guard • Vent holes under arms
2
3
Po c ets k
Po c ets k
SIZE k e ts Plu
MD
62028
62035
LG
62029
62036
XL
61482
XL
62030
62037
2X
61483
2X
62031
62038
3X
61484
3X
62032
62039
4X
61485
4X
62033
62040
5X
61486
5X
62034
62041
Zip p er
W
ater Proo
SIZE MD
63128
LG
63129
XL
63130
2X
63131
3X
63132
4X
63133
5X
63134
S849
2
it P k e t oc
Rain Pant
• 100% polyester woven 300D oxford with PU coating • Elastic waist with drawstring • Pocket slits on side with rain guard • Snap ankle closure • Class E (for Ensemble) when worn without other ANSI/ISEA 107 compliant garments • Class 3 when worn with a Class 2 or Class 3 upper garment • Meets all levels of water protection, up to and including “water proof” per ANSI/ISEA 107
W
ater Proo
f
Lined Rain Pant
• 100% polyester 300D with PU coating • 4.7 oz quilted lining • Zipper and snap front closure • Belt loops • 2 large front pockets • 2 back pockets • Class E (for Ensemble) when worn without other ANSI/ISEA 107 compliant garments • Class 3 when worn with a Class 2 or Class 3 upper garment
f
S850PT
Sl
SIZE MD
62107
LG
62108
XL
62109
2X
62110
3X
62111
4X
62112
5X
62113
Meets ANSI/ISEA 107 Requirements
82
ater Proo
8
Po c ets k
s
4
Po c ets k
k e ts Plu
Zip p er
W
ater Proo
f
W
oc
S860BIB
Rain Bib
• 100% polyester 300D with PU coating. • Upper chest pocket: 1 large pocket with zipper, 1 cell phone pocket, 4 pen pockets • 2 large back pockets • Adjustable suspender straps • Snap fly closure • Adjustable snaps on leg opening and back waist • Class E (for Ensemble) when worn without other ANSI/SEA 107 compliant garments • Class 3 when worn with a Class 2 or Class 3 upper garment
W
ater Proo
f
oc
s
61481
s
LG
P
61480 P
MD
f
SIZE
SIZE MD
63136
LG
63137
XL
63138
2X
63139
3X
63140
4X
63141
5X
63142
Rain Wear - Aware Wear
S230
Boonie Hat
Accessories - Aware Wear BP1
Hi-Viz Backpack
• 100% polyester 600D Oxford with PVC coating • Adjustable straps • Silver reflective stripes • 2 side pockets with mesh vents • Front mesh pocket holds hard hat • 1 per carton
• Polyester woven 300D oxford with PU coating • 360° polyester mesh venting • One size fits most, 24” circumference • 1” reflective tape • ANSI/SEA 107-Class Headwear • 1 per carton
SIZE Adjustable
Front Mesh Pocket large enough to hold a Full Brim or Cap style Hard Hat
M esh
SIZE One Size Fits Most
S109
61587
29003
61588
Knit Hat
• 100% acrylic • Silver reflective stripe • Great to wear under an ERB Safety hard hat or alone • One size fits most • 1 per carton
Perfect for Work Gear
SIZE Adjustable
63196
S486 A110
Leg Gaiters
• Polyester oxford with PU coating • One size fits all, 17.5” long, adjustable width with hook & loop closure • Reflective tape for visibility • 1 pair per carton
Doo Rags
• 100% Polyester Birdseye knit mesh • Three panel headwrap • One size fits most • 1 per carton
SIZE One Size Fits Most
61585
S o li d
M esh
SIZE One Size Fits Most
S108
61285
61286
S487
Contrasting Trim Leg Gaiters
• Polyester oxford with PU coating • One size fits all, 17.5” long, adjustable width with hook & loop closure • 2” silver reflective tape backed by contrasting orange trim • 1 pair per carton
Ball Cap
• 100% polyester 300D oxford • Two 100% polyester mesh venting panels • Adjustable hook & loop closure • ANSI/SEA 107-Class Headwear • 1 per carton
SIZE One Size Fits Most
SIZE One Size Fits Most
S268
61705
61586
Mesh Neck Shield
• Ultra-lightweight 100% polyester • Elastic band fits securely around hat brim • Provides protection from sun and heat while increasing visibility • Fits all ERB cap and full brim style helmets • 3 per carton
S291
Hard Hat Covers
• Contrasting mesh color and reflective material greatly enhance both day and night visibility • Fits all ERB cap and full brim style helmets • 3 per carton
M esh
SIZE One Size Fits Most
S o li d
61706
M esh
SIZE 19281
19282
One Size Fits Most
13760
13761
Meets ANSI/ISEA 107 Requirements
83
Aware Wear
SCREEN PRINTING
In-house Decorating Services
Minimum quantities apply, call for details. 855-621-9100
Let ERB handle your Screen Printing needs. Low minimum order quantities of 12 pieces, low cost and fast lead times! We use polyester based ink to ensure your logo is top quality and will properly adhere to the garment. Print up to 4 spot colors.
CUSTOM VINYL TRANSFER PRINTING With a low minimum order of 12 pieces, ERB makes it easy to order Custom Vinyl Transfer Printing. Choose from full color, multi-color or complicated designs. Unlike screen printing, vinyl lays over mesh holes on the vest, allowing for more accuracy and precision.
CUSTOM EMBROIDERY ERB also offers Embroidery services! Low minimum order quantities of 36 pieces, low cost and fast lead time! Whether it be on a safety vest, polo shirt or boonie hat, ERB can service your needs. Call for your quote now on up to 10,000 stitches and unlimited colors. * Minimum area of background material required for ANSI compliance may not be met if excessively large text or logos are printed on garment. *All custom orders are subject to a 5% overage or shortage.
SEE PAGE 103 FOR ADDITIONAL INFORMATION ERB Safety does not assume responsibility for errors or damage to our products when printed by third parties.
84
Mechanics - Gloves
WORK GLOVES SIZE M
21201
21205
21210
L
21202
21206
21211
XL
21203
21207
21212
SIZE S
21300
M
21301
L
21302
XL
21303
M100 • Synthetic leather fingertips, fourchettes and padded palm • Nylon on back side of hand • Neoprene cuff, Lycra cuff binding • Hook & loop cuff closure • Available in black, blue or red • Carton Quantity: 1 pair
M200 High Visibility • Amara synthetic leather palm, fingertips and fourchettes will not fade on hands • Spandex with foam back • Hi-Viz Lime with reflective strips on back and across knuckles • Neoprene cuff, Lycra cuff binding • Hook & loop cuff closure • Carton Quantity: 1 pair
Flexible, ridged, neoprene, protective knuckle bar
SIZE S
21304
M
21305
L
21306
XL
21307
M300 Knuckle Guard • Synthetic leather fingertips, fourchettes and padded palm • Spandex with foam back • Ridged neoprene knuckle bar, hinges with hand movement • Neoprene cuff, Lycra cuff binding • Hook & loop cuff closure • Carton Quantity: 1 pair
More Glove Offerings! Please refer to the Price list page 27 to see gloves in the following categories: ANSI cut resistant gloves and sleeve • Winter • PU Coated • Pigskin Leather • Full Dipped
85
Gloves - Leather
D200 Pigskin Drivers • Pigskin leather palm and fingers • Spandex foam back for flexible protection • Double needle reinforced seams • Stretch nylon fourchettes • Elastic cuff • Carton Quantity: 1 pair
D300 Premium Leather Drivers
• Select grain cowhide leather palm and fingers with a split cowhide leather back • Flexible keystone thumb construction • Shirred elastic wrist helps keep dirt and debris from entering the glove • 12 pair per carton
Leather Palm • Select shoulder split palm with canvas back • Full feature gunn cut with lined palm • Starched safety cuff • Men’s one size fits most • 12 pair per carton
86
SIZE S
21308
M
21309
L
21310
XL
21311
SIZE S
14400
M
14401
L
14402
XL
14403
SIZE L
14416
Gloves
Nitrile Dipped Nylon Knit - Gloves
SIZE S
21222
M
21223
L
21224
XL
21225
SIZE S
21218
M
21219
L
21220
XL
21221
SIZE S
21227
M
21228
L
21229
XL
21230
N100 Smooth Finish • 15 gauge gray nylon with spandex liner for improved dexterity • Micro-foam nitrile coated palm and fingers with smooth finish • Nitrile coating improves grip and slip resistance in oily environments • Breathable • Elastic cuff • 12 pair per carton
N200 Sandy Finish • 13 gauge blue nylon with spandex liner for improved dexterity • Nitrile coated palm and fingers with rough finish • Nitrile coating improves grip and slip resistance in oily environments • Elastic cuff • 12 pair per carton
N300 Micro-Dotted Palm • 15 gauge gray nylon with spandex liner for improved dexterity • Nitrile coated palm and fingers • Nitrile coating improves grip and slip resistance in oily environments • Micro-dots on palm and fingers • Elastic cuff • 12 pair per carton
87
Gloves - Coated Knit
Latex Coated String • Cotton/polyester shell • Latex coated palm and fingertips • Straight thumb • 12 pair per carton
SIZE S
14460
L
14461
Latex coating for easy gripping and protection
String with PVC Dots One Side • Cotton/polyester blend with PVC dots on palm • Standard weight, hemmed • Seamless design • 12 pair per carton
SIZE S
14413
M
28896
L
14414
XL
28897
PVC dots for easy gripping on wet and dry surfaces
String with PVC Dots Two Sided • Cotton/polyester blend with PVC dots on both sides • Standard weight, hemmed • Seamless design • 12 pair per carton
88
SIZE S
14455
M
28900
L
14456
Gloves
Coated Knit - Gloves
SIZE L
14395
String with PVC Dots Two Sided Hi-Viz • Cotton/polyester blend with PVC dots on both sides • Medium weight • Knit wrist, hemmed • Seamless design • 12 pair per carton
PVC dots for easy gripping on wet and dry surfaces
SIZE S
14503
M
14504
L
14505
XL
14506
Latex Coated String Crinkle Finish Hi-Viz • Cotton/polyester blend • Seamless knit shell with a latex coating on palm and fingertips • Machine washable • 12 pair per carton
Latex coating for easy gripping and protection
SIZE S
14404
M
14405
L
14406
XL
14407
Latex Coated String Crinkle Finish • Seamless cotton/polyester string knit • Latex coated palm and fingertips • Straight thumb • 10 gauge cut medium weight shell • 12 pair per carton
89
Gloves - Brown Jersey - Knit - PVC
Lined Brown Jersey • Cotton/polyester shell lined with red fleece • Gunn cut • Slip-on style • 12 pair per carton
Brown Jersey
L
L
Economy String
SIZE
Black PVC Double Dipped • Fully coated PVC • Liquid proof with semi-rough finish • 12” with interlock lining • 12 pair per carton
14470
SIZE
• Single-ply cotton/polyester • Clute cut • Knit wrist • 12 pair per carton
• Cotton/polyester blend • Standard weight, hemmed • Ambidextrous (reversible) • Use as glove or glove liner • 12 pair per carton
90
SIZE
14430
S
28898
M
14409
L
14410
XL
28899
SIZE L
14450
Gloves
Disposable - Gloves
SIZE S
14495
M
14496
L
14497
XL
14498
SIZE S
15575
M
15576
L
15577
XL
15578
SIZE S
14422
M
14423
L
14424
XL
14425
Blue Nitrile • 4 mil, 100% nitrile, latex free and powder free • Ambidextrous (reversible) • FDA and USDA acceptable • Carton Quantity: 1 box/100 gloves • Applications: Food Processing, Food Preparations, Salad Bars, Industrial Applications that need Puncture, Chemical, and Abrasion Resistance with Tactile Sensitivity
Latex • 4 mil, powdered latex, industrial grade • Ambidextrous (reversible) • FDA and USDA acceptable • Carton Quantity: 1 box/100 gloves • Applications: Food Processing, Lab Work, Electronics Assembly, General Pharmaceutical and Food Service
Vinyl • 4 mil, powdered vinyl, 10” length • Ambidextrous (reversible) • FDA and USDA acceptable • Carton Quantity: 1 box/100 gloves • Applications: Food Processing, Food Preparation, Salad Bars, Handling Adhesives, Janitorial and Packing
Custom Imprinted Gloves Call 855-621-9100 for details See Page 103 for additional information
91
First Aid Kits - Unitized Contents First ANEW! id Kits - Class A & B Type I, II, III Z308.1-2015 Class A Unitized Plastic
Class A Unitized Metal
• Water resistant plastic box with handle and 2 holes for mounting • Box dimensions: 10” L x 7” W x 3” D • The Contents Meet ANSI Z308.1-2015 for Class A, Type I, II and III
• Water and corrosion resistant metal box with handle and 2 tabs for mounting • Box dimensions: 15.25” L x 10.5” W x 4.75” D • The Contents Exceed ANSI Z308.1-2015 for Class A, Type I and II
CONTENTS LIST 16 Adhesive Bandages 1” x 3” 10 Antiseptic Towelettes 1/57 oz. 10 Burn Treatments 1/32 oz. 10 Antibiotic Applications 1/57 oz. 2 Gauze Pads 3” x 3” 1 Roller Bandage 2”x 4 yd. 1 Cold Pack 4” x 5” 2 Pair Examination Gloves 1 Triangular Bandage 40” x 40” x 56” 2 Eye/Skin Washes .5 fl. oz. 1 First Aid Guide - English and Spanish 1 Adhesive Tape Roll 2.5 yd. (total) 2 Eye Pads (2.9 sq. in.) 1 Scissors 2 Trauma Pads 5” x 9” 1 Breathing Barrier 1 Burn Dressing 4” x 4” 6 Hand Sanitizers 1/32 oz. 1 Case
CONTENTS LIST 100 Blue Detectable Bandages 1” x 3” 200 Adhesive Bandages 1” x 3” 100 Adhesive Bandages 3” x 3/4” 10 Knuckle Bandages 10 Fingertip Bandages 60 Alcohol Pads 10 Antiseptic Towelettes 1/57 oz. 10 Burn Treatments 1/32 oz. 10 Antibiotic Applications 1/57 oz. 10 Gauze Pads 3” x 3” 1 Roller Bandage 2”x 4 yd. 1 Roller Bandage 3” x 4 yd. 1 Roller Bandage 4”x 4 yd. 1 Cold Pack 4” x 5” 1 4” Bandage Compress 4 Pair Examination Gloves 1 Triangular Bandage 40” x 40” x 56” 1 Elastic Bandage 3” (ACE type)
Class A Unitized Metal 29961
100 1 1 1 1 6 100 1 1 2 1 1 1 2 1 1 6 1
Aspirin tablets Antiseptic Spray 2 oz. Burn Spray Eye/Skin Wash 4 fl. oz. Eye Cup Filtration Masks Cotton Tip Applicators First Aid Guide - English and Spanish Adhesive Tape Roll 2.5 yd. (total) Eye Pads (2.9 sq. in.) Tweezer Scissors Splint 4” X 24” Trauma Pads 5” x 9” Breathing Barrier Burn Dressing 4” x 4” Hand Sanitizers 1/32 oz. Case
DESCRIPTION
ITEM #
Class A Unitized Plastic
29960
Class A Unitized Metal
29961
Unitization of first aid kits produces organized, compact kits that are easy to resupply. Each unitized kit contains color coded, clearly marked units to insure protection for most work related medical emergencies.
Class B Unitized Plastic
92
Class B Unitized Metal
• Water resistant plastic box with handle and 2 holes for mounting • Box dimensions: 14” L x 10.5” W x 3.5” D • The Contents Meet ANSI Z308.1-2015 for Class B, Type I, II and III
• Water and corrosion resistant metal box with handle and 2 tabs for mounting • Box dimensions: 14.5” L x 18.5” W x 6” D • The Contents Exceed ANSI Z308.1-2015 for Class B, Type I and II
CONTENTS LIST 50 Adhesive Bandages 1” x 3” 50 Antiseptic Towelettes 1/57 oz. 25 Burn Treatments 1/32 oz. 25 Antibiotic Applications 1/57 oz. 4 Gauze Pads 3” x 3” 2 Roller Bandages 2” x 4 yd. 1 Roller Bandage 4” x 4 yd. 2 Cold Packs 4” x 5” 4 Pair Examination Gloves 2 Triangular Bandages 40” x 40” x 56” 1 Eye/Skin Wash 4 fl. oz. 1 First Aid Guide - English and Spanish 2 Adhesive Tape Rolls 2.5 yd. (total) 2 Eye Pads (2.9 sq. in.) 1 Scissors 1 Splint 4” x 24” 4 Trauma Pads 5” x 9” 1 Breathing Barrier 2 Burn Dressings 4” x 4” 10 Hand Sanitizers 1/32 oz. 1 Tourniquet 1 Case
CONTENTS LIST 100 Blue Detectable Bandages 1” x 3” 100 Adhesive Bandages 1” x 3” 50 Adhesive Bandages 3” x 3/4” 50 Fabric Badages 1” x 3” 20 Knuckle Bandages 20 Fingertip Bandages 100 Alcohol Pads 50 Antiseptic Towelettes 1/57 oz. 20 Povidone Iodine Wipes 20 Sting Relief Pads 25 Burn Treatments 1/32 oz. 25 Antibiotic Applications 1/57 oz. 30 Gauze Pads 3” x 3” 2 Roller Bandages 2” x 4 yd. 1 Roller Bandage 3” x 4 yd. 1 Roller Bandage 4” x 4 yd. 2 Cold Packs 4” x 5” 8 2” x 3” Non Stick Pads 1 4” Bandage Compress 4 Pair Examination Gloves 2 Triangular Bandages 40” x 40” x 56” 6 Filtration Masks
1 100 100 100 1 1 1 1 100 1 2 2 1 1 1 4 1 2 10 1 1
Elastic Bandage 3” (ACE type) Aspirin tablets Non Aspirin Tablets Pain Relief Tablets Antiseptic Spray 2 oz. Burn Spray Eye/Skin Wash 4 fl oz. Eye Cup Cotton Tip Applicators First Aid Guide - English and Spanish Adhesive Tape Rolls 2.5 yd. (total) Eye Pads (2.9 sq. in.) Tweezer Scissors Splint 4” X 24” Trauma Pads 5” x 9” Breathing Barrier Burn Dressings 4” x 4” Hand Sanitizers 1/32 oz. Tourniquet Case
DESCRIPTION
ITEM #
Class B Unitized Plastic
29962
Class B Unitized Metal
29963
NEW For 2017 - First Aid Kits
Bulk Contents - First Aid Kits
CLASS A KIT CONTENTS: 16 Adhesive Bandages 1” x 3” 1 Adhesive Tape 2.5 yd. (total) 10 Antibiotic Applications 1/57 oz. 10 Antiseptic 1/57 oz. 1 Breathing Barrier 1 Burn Dressing (gel soaked) 4” x 4” 10 Burn Treatments 1/32 oz. 1 Cold Pack 4” x 5” 2 Eye Pads (2.9 sq. in) 1 Eye/Skin Wash 1 fl. oz. 1 First Aid Guide - English and Spanish 6 Hand Sanitizers 1/32 oz. 2 Pair Examination Gloves 1 Roller Bandage 2” x 4 yd. 1 Scissors 2 Sterile Gauze Pads 3” x 3” 2 Trauma Pads 5” x 9” 1 Triangle Bandage 40” x 40” x 56”
Class A Type I, II, III Plastic • Water resistant plastic box with handle and 2 holes for mounting • Box dimensions: 8.5” L x 5.25” W x 3” D
DESCRIPTION
ITEM #
Class A Type I, II, III Plastic
28888
Class A Type I, II, III Metal
28889
Class A Type I, II, III Metal • Water and corrosion resistant metal box with handle and 2 tabs for mounting • Box dimensions: 8.5” L x 5” W x 2.63” D
The Contents Meet ANSI Z308.1-2015 for Class A, Type I, II and III
CLASS B KIT CONTENTS:
50 Adhesive Bandages 1” x 3” 2 Adhesive Tapes 2.5 yd. (total) 25 Antibiotic Applications 1/57 oz. 50 Antiseptic 1/57 oz. 1 Breathing Barrier 2 Burn Dressing (gel soaked) 4” x 4” 25 Burn Treatments 1/32 oz. 2 Cold Packs 4” x 5” 2 Eye Pads (2.9 sq. in.) 1 Eye/Skin Wash 4 fl. oz. total 1 First Aid Guide - English and Spanish 10 Hand Sanitizers 1/32 oz. 4 Pair Examination Gloves 2 Roller Bandages 2” x 4 yd. 1 Roller Bandage 4” x 4 yd. 1 Scissors 1 Splint 4 Sterile Pads 3” x 3” 1 Tourniquet 4 Trauma Pads 5” x 9” 2 Triangle Bandages 40” x 40” x 56”
Class B Type I, II, III Plastic • Water resistant plastic box with handle and 2 holes for mounting • Box dimensions: 9.5” L x 9.5” W x 3” D
DESCRIPTION
ITEM #
Class B Type I, II, III Plastic
28890
Class B Type I, II, III Metal
28891
Class B Type I, II, III Metal • Water and corrosion resistant metal box with handle and 2 tabs for mounting • Box dimensions: 10.25” L x 10.25” W x 2.5” D
The Contents Meet ANSI Z308.1-2015 for Class B, Type I, II and III
Custom logo first aid kit program Call 855-621-9100 for details ERB Safety does not assume responsibility for errors or damage to our products when printed by third parties.
93
First Aid Kits
First Aid Kits
10 and 10 Premium
25 and 25 Premium
50 and 50 Premium
• Great size for glove compartment • Plastic box with gasket • Box dimensions: 4.5” L x 7.5” W x 2.75” D • Wall mountable • 1 per carton
• Plastic and metal box (plastic box has gasket) • Box dimensions: 6.5” L x 9.5” W x 2.75” D • Wall mountable • 1 per carton
• Plastic and metal box (plastic box has gasket) • Box dimensions: 10” L x 10” W x 2.75” D • Wall mountable • 1 per carton
DESCRIPTION
ITEM #
25 Plastic
17132
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
25 Metal
17150
50 Plastic
17135
10
17130
25 Premium Plastic
17133
50 Premium Plastic
17136
10 Premium
17131
25 Premium Metal
17134
50 Premium Metal
17137
100 Premium • Metal box • Box dimensions: 10.25” L x 15” W x 4.625” D • Wall mountable • 1 per carton
DESCRIPTION
ITEM #
100 Premium
17138
94
• Weatherproof plastic case • Assist in compliance with OSHA regulations • Box Dimensions: 4.5” L x 7.5” W x 2.75” D • Wall mountable • 1 per carton
• Basic Emergency Preparedness and First Aid Kit • Contains 167 pieces of first aid supplies, protective clothing and instruments • Soft carrying case with handle • Contents are organized for fast access and labeled with clear directions by emergency category • 5.5” L x 3.5” W x 7” H • 1 per carton DESCRIPTION Preparedness & First Aid Kit
SM All-In-One 37 Piece First Aid Kit
Bloodborne Pathogen
Emergency Preparedness and First Aid Kit
DESCRIPTION
ITEM #
Pathogen Kit
17000
ITEM # 17140
Economy 107 Piece First Aid Kit
• Contents: Adhesive Strips ¾” x 3” (10), Adhesive Strips 3/8” 1 ½” (10), Gauze Pads 2” x 2” (2), Alcohol Cleansing Towelettes (3), Butterfly Closure (1), Cotton Tips (10) • Box Dimensions: 5” L x 3.75” W x 1.25” D • Can be imprinted with one color logo. 72 piece minimum • Call for quote
• Contents: Adhesive Strips ¾” x 3” (35), Adhesive Strips 3/8” x 1 ½” (30), Gauze Pads 4” x 4” (4), Gauze Pads 3” x 3” (4), Gauze Pads 2” x 2” (4), Gauze Bandage 2” (1 roll), Alcohol Cleansing Towelettes (15), Cotton Swabs (10), Adhesive Tape (1 roll), Forceps (1), Lancet/ Splinter Remover (1), Tongue Depressors (4), Instant Cold Pack (1), First Aid Guide (1) • Box Dimensions: 6.5” L x 8.25” W x 2.5” D
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
37 Plastic
17141
107 Plastic
17139
ERB Bulk kits feature neat, orderly interior packaging. Items are wrapped and labeled for identification and use when kit is opened. Check www.e-erb.com for product updates.
First Aid Kits HotHands
Protection From The Elements
®
Hothands warmers are single use air-activated heat packs that provide everyday warmth and are ideal for keeping your body warm when the temperature gets cold. They’re available in several styles designed for hands, feet and body. Have you tried them all? ®
How do HotHands warmers work? ®
Hothands contain ingredients like iron, activated carbon and water. Once these ingredients come into contact with the oxygen in the air, the ingredients oxidize and produce heat. The combination of ingredients has been specially formulated to ensure a constant and comforting heat for a wide variety of uses. ®
• Up to 8 hours or more of long lasting heat! • Ready to Use • Air-Activated • Safe, Natural Heat
DESCRIPTION
ITEM #
Hand Warmer
28873
Foot Warmer
28875
Toe Warmer
28874
Toe Warmers
Hand Warmers
Foot Warmers
Safetec Sunscreen Lotion ®
• For skin sensitive to sunburn • Each box contains 25 packets • Each packet contains 3.5 grams of lotion
• SPF 30 PABA free • Helps prevent sunburn • Higher SPF gives more sunburn protection
DESCRIPTION
ITEM #
Sunscreen Lotion
28856
Eye Wash Hydrosep Solution
Gravity Fed Eyewash Station
• Specifically formulated to provide protection against bacteria, fungi, staph and algae growth for self contained eyewash stations • Add to eyewash station and fill with water to required level • Each bottle preserves potable water from 5 to 20 gallons up to 90 days • Use as directed • Case contains 4-8oz. bottles
• Self contained emergency eyewash station suitable for applications where plumbed potable water is not available (measures 25.5” H x 20” W) • Holds 14 gallons • Retractable tray protects eyewash heads from airborne contaminants • Pinch valve design ensures positive water flow within one second of activation • 15 minute fill line volume exceeds ANSI Z358.1 requirements for an emergency eyewash station • Bright yellow color promotes awareness and allows for rapid identification • Carton contains eyewash station with inspection tag, operation and maintenance manual, mounting bracket, and 8 fluid oz. of Hydrosep Water Additive
®
WATER TREATMENT ADDITIVE DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
Hydrosep
17051
Eyewash Station
17050
95
Safety Apparel PC100 Coveralls • 7.5 mil polyolefin disposable coveralls • Anti-static and lint free • Waterproof and breathable • Inherent barrier protection against splash and dry particulate hazards • Meets size requirements of ANSI/ISEA 101 • 25 per case • Individually bagged, retail ready
Zipper front closure with protective flap
F85 Wrist Support Ideally suited for laboratories, medical, food processing, pharmaceutical, asbestos or other contaminant removal and low hazard chemical and paint spraying environments
• Lightweight flexible, elastic wrist support • Designed to reduce stress • Ideal for office and light industrial use • Open palm design with thumb strap • Hook & loop closure material allows for DESCRIPTION proper fit • 6 per bag One Size
Elastic Wrist
ITEM # 12121
Elastic Waist DESCRIPTION
ITEM #
MD
14701
LG
14702
XL
14703
2X
14704
3X
14705
Elastic Ankle
Knee Pad
Protective Coveralls • 5 mil spunbond polypropylene reinforced by a microporous film for high tensile strength and flexibility • Anti-static, lint free and splash proof • Designed for a broad range of non-hazardous applications including: spray painting, fiberglass applications, general cleanup, pressure washing, non-hazardous liquid handling, tank cleaning and printing.
PC 120 PROTECTIVE COVERALLS
Zipper front, white
PC 125 PROTECTIVE COVERALLS
ITEM #
DESCRIPTION
ITEM #
MD
14711
MD
14799
LG
14712
LG
14800
XL
14713
XL
14801
2X
14714
2X
14802
3X
14715
3X
14803
4X
14716
14804
5X
14717
Zipper front, elastic 4X wrist and ankles, white 5X
14805
PC 261 PROTECTIVE COVERALLS
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
MD
14806
MD
14813
LG
14807
LG
14814
XL
14808
XL
14815
2X
14809
2X
14816
3X
14810
3X
14817
Zipper front, hood, 4X elastic wrist and 5X ankles, white
14811
Zipper front, hood, 4X boots, elastic 5X wrist, white
14818
96
14812
ITEM #
• 40 pair per carton
14758
Knee Pad
• Provides a combination of barrier protection, breathability and comfort • Protects against blood-borne pathogens • Meets the requirements of ASTM F903 Penetration for Diazinon, Motor Oil (40 wt.), Bleach (household), Isocyanate Based Paint, Sodium Hydroxide, Sodium Hyperchlorite and Blood • 25 per case. Bulk packed
DESCRIPTION
PC 127 PROTECTIVE COVERALLS
• Lightweight • Padding capped with abrasion resistant rubber for long-lasting wear • Slip resistant • Adjustable hook & DESCRIPTION loop closure
14819
PC111 Anti-Skid Polypropylene Shoe Covers • Blue sanitary shoe covers feature 2 wide tacky strips on the sole that prevent slipping and sliding • Made of strong, abrasion-resistant spunbond polypropylene. DESCRIPTION Full elastic top stretches for easy on and off removal LG (7-10) • 50 pair (100 each) per bag XL (11-13)
ITEM # 14820 14821
AD2N95 US Safety Respirator • General use in dusty conditions • 20 per box • Disposable • N95 DESCRIPTION
ITEM #
AD2N95 Respirator
13490
Additional Protective Apparel WITH SUSPENDERS
Samson Back Support
NO SUSPENDERS
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
SM 28”- 32”
12300
SM 28”- 32”
12307
MD 33”- 37”
12301
MD 33”- 37”
12308
LG 38”- 42”
12302
LG 38”- 42”
12309
XL 43”- 48”
12303
XL 43”- 48”
12310
2X 49”- 53”
12304
2X 49”- 53”
12311
3X 54”- 58”
12305
3X 54”- 58”
12312
DESCRIPTION
ITEM #
DESCRIPTION
ITEM #
SM 28”- 32”
12135
SM 28”- 32”
12139
MD 33”- 37”
12136
MD 33”- 37”
12140
LG 38”- 42”
12137
LG 38”- 42”
12141
XL 43”- 48”
12138
XL 43”- 48”
12142
• Adjustable hook & loop closure • Rubberized webbing “grippers” to prevent support from slipping or moving • Samson has full length “power net” material for maximum breathability • Features an extra wide panel on back for embroidery or screen printing • 1 per carton • * Available with and without suspenders. Suspender style: adjustable 1.5” wide elastic
Economy Back Support
NO SUSPENDERS
WITH SUSPENDERS
Safety Apparel
• Adjustable hook & loop closure • Adjustable elastic side panels for extra support • Features an extra wide panel on back for embroidery or screen printing • 1 per carton • * Available with and without suspenders. Suspender style: adjustable 1.25” wide elastic
Sizing: Unisex size is measured at the widest point of hips or waist
4148 Rain Coat • .35mm PVC polyester 48” raincoat • Vented cape back with storm flap • Detachable hood • Corduroy collar • 2 outside pockets with flaps • Snap front closure with storm flap • Light to medium duty • Applications: Survey Crews, Military, Law Enforcement, Ranching and Forestry • 1 per carton DESCRIPTION
DESCRIPTION
YELLOW
4025 Rainsuit • .25mm single ply 3 piece rainsuit • Jacket has vented cape back, underarm vents, 2 front pockets with flaps and a corduroy collar • Drawstring hood with 4 snaps for a secure fit • Overalls have adjustable elastic suspenders and nonconductive/noncorrosive D-ring buckles and studs. Single snap fly • Light duty and lightweight protection • Applications: Construction, Road Work, Utilities, Survey Crews and Forestry • 1 per carton
DESCRIPTION
YELLOW
MD
14360
MD
14910
LG
14361
LG
14911
XL
14362
XL
14912
2X
14363
2X
14913
3X
14364
3X
14914
4X
14365
4X
14915
5X
14366
5X
14916
YELLOW
SM
14349
MD
14350
LG
14351
XL
14352
2X
14353
3X
14354
4X
14355
5X
14356
6X
14357
4035 Rainsuit • .35mm PVC over polyester 3 piece rainsuit • Jacket has a vented cape back, 5 snap front closure with storm flap, 2 front pockets with flaps and a corduroy collar • Drawstring hood with 4 snaps and a chin strap for secure fit • Overalls have adjustable elastic suspenders and nonconductive/noncorrosive D-ring buckles and studs. Single snap fly • Adjustable snap closures on wrist and ankles • Light to medium duty • Applications: Construction, Road Work, Utilities, Survey Crews and Forestry • 1 per carton
97
Work Zone Accessories F4 Denim Shop Apron
Emergency Air Horn And Refill
• Heavy-duty 10.5 oz. denim • Dark Indigo color masks dirt and stains • Featuring nylon ties, pencil and patch pockets • 4” high divided chest pocket • 5.25” high divided waist pocket • 36” L x 24” W • 6 per carton
• Easy to operate push button Air Horn • Can be heard up to one mile away • Non flammable • Ozone safe air • Impact resistant horn • Meets USCG requirements • Net Weight 8 oz. • 3 per box - Airhorn / 1 per box - Refill DESCRIPTION
ITEM #
Airhorn
14755
Refill
14756
Required by Crane Operators and Welding Alert for certain work zones
S3 Safety Flag F15 Waist Nail Apron • Durable poly/cotton blend duck canvas • Reinforced bartacks at all stress points • Featuring bound edges, hammer loop and pencil pocket • 9” L x 15” W • 6 per carton
F16 Bib Nail Apron • Durable 7 oz. 65/35 poly/cotton blend duck canvas • Reinforced bartacks at all stress points • Featuring bound edges, hammer loop and pencil pocket • 23” L x 17” W • 6 per carton
DESCRIPTION
ITEM #
F4 Denim Shop Apron
18004
F15 Waist Nail Apron
18065
F16 Bib Nail Apron
18066
F15P Nail Apron Printed
68067
Our affordable line of quality aprons are made from ultra-durable fabrics. All aprons are rugged and designed as uniform wear for the construction, industrial and janitorial markets. Corporate logos or slogans may be embroidered or screen printed on a variety of apron styles.
• 18” x 18” Fluorescent Orange vinyl DESCRIPTION
ITEM #
Safety Flag
14307
DSC10 Rebar OSHA Cap
ERB10 Rebar Cap
• Approved by California OSHA #C1718AG and OSHA 1723AG • Complies with Federal OSHA 701(b) • Cover contains a curved steel plate, which provides additional protection against falls that occur from an angle, preventing hazardous impalement • Fits Rebar #3 - #7 • 25 per carton DESCRIPTION
• Scratch protection cap • NOT to be used for impalement protection • Fits Rebar #3-#8 • Orange for increased visibility • 100 per carton ITEM #
DSC10 OSHA Cap #3 - #7
16910
ERB 10 Rebar Cap #3 - #8
16911
Bilingual Barricade Tape • Danger Tape - Red/Black • Caution Tape - Yellow/Black • 2.4 mil • 3” x 1000’ • Made with durable, low density polyethylene • Sold by the case; 10 rolls per case
Starts at Page 45
98
• 24” wooden staff • 1 per carton
DESCRIPTION
ITEM #
Caution Yellow/Black, 10 rolls/cs 3”x1000’
13752
Danger Red/Black, 10 rolls/cs 3”x1000’
13753
Work Zone Accessories
Products
Authorized Wholesaler Call ERB Safety to quote other PPE Safety Solutions items not pictured. 800-800-6522
FIT TEST APPARATUS FT-10
FT-20
FT-30
• Qualitative fit test apparatus: sweet solution • 1 per box
• Qualitative fit test apparatus, training materials and carrying case: sweet solution • 1 per box
• Qualitative fit test apparatus: bitter solution • 1 per box
Item # 13597
Item # 13598
8293Q
8233Q
• Quantitative fit test respirator, P100 • 1 per box
• Quantitative fit test respirator, N100 • 1 per box
Item Item##21233 21233
Item Item##21234 21234
Item # 13599
8293Q and 8233Q To be used exclusively for Quantitative Fit Testing. NOT to be used for respiratory protection.
RESPIRATOR ACCESSORIES 504 • Respirator cleaning wipes • 8” x 10” towelettes are alcohol-free and will not damage the facepiece materials • 100 per box
Item # 13595
WARNING!
6885 Clear 6886 Tinted Lens Cover • For 6000 series full facepiece respirators to protect and extend life of shield • 25 per bag
Clear - Item # 13552 Tinted - Item # 13600
7899-100 • Clear lens cover • For 7000 series full facepiece respirator to protect and extend life of shield • 100 per box
Item # 13620
These respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the USER Instructions provided as a part of the product packaging. A written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see packaging instructions, supervisor, or call 3M PSD Technical Service in USA at 1-800-243-4630 and in Canada at 1-800-267-4414.
99
CARTRIDGES†
6001 OV=NIOSH
6002 AG=NIOSH
6003 OV/AG=NIOSH
6004 AM/MA=NIOSH
• Approval: Certain organic vapors • 1 pair
• Approval: Chlorine, hydrogen chloride, hydrogen sulfide, sulfur dioxide, or chlorine dioxide • 1 pair Item # 13539
• Approval: Certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide or hydrogen fluoride • 1 pair Item # 13540
• Approval: Ammonia and methylamine • 1 pair
Item # 13538
Item # 13541
† Cartridges can be used with 6000 series respirators
6006 MULTI-GAS=NIOSH
6005 FORM=NIOSH • Approval: Formaldehyde and certain organic vapors ‡ • 1 pair
Item # 13542
• Approval: Certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride ‡ Item # 13567 • 1 pair
6009S - HG = NIOSH • Approval: Mercury vapor, chlorine and sulfur dioxide • 1 pair
‡ OSHA requires that gasproof goggles be worn with half facepiece respirators when used against formaldehyde.
Item # 13573
ELASTOMERIC Facepiece respirators
5101 (S)* 5201 (M)* 5301 (L)*
Item # 13591 Item # 13592 Item # 13593
• OV • 1 per bag
6700 (S) 6800 (M) 6900 (L)
51P71 (S)* 52P71 (M)* 53P71 (L)*
Item # 13569 Item # 13550 Item # 13570
• OV/P95 • 1 per bag
Item # 13571 Item # 13551 Item # 13572
• 1 per bag
6100 (S) 6200 (M) 6300 (L)
6191 (S) 6291 (M) 6391 (L)
Item # 13532 Item # 13533 Item # 13534
• P100 • 1 per bag
Item # 13535 Item # 13536 Item # 13537
7800S (S) 7800S (M) 7800S (L)
7501 (S) 7502 (M 7503 (L)
Item # 13527 Item # 13528 Item # 13529
• 1 per bag
Item # 13561 Item # 13547 Item # 13562
* 5000 Series respirators are disposable. The catridges can not be replaced.
• 1 per bag
• 1 per bag
501
2071
5N11
2097 §
• Filter retainer for use with 5N11 and 5P71 filters • 20 per box
• P95 filter • 1 pair
• N95 Pre-filter • 10 per box
• P100 filter with nuisance level organic vapor relief • 1 pair
502
2091
5P71
7093
• Filter adapter for use with 2000 Series and 7093 filters. • 20 per box
• P100 filter • 1 pair
• P95 Pre-filter • 10 per box
• P100 filter • 12 per box
FILTERS AND RETAINERS
Item # 13544
Item # 13566
100
Item # 13545
Item # 13546
Item # 13543
Item # 13596
Item # 13574
§ 2097 Nuisance level refers to concentrations below current OSHA PEL or applicable government exposure limits whichever is lower.
Item # 13594
RESPIRATORS Product # STD/CTN/QTY Suggested Classification Applications
8200 20 per box
N95
8210 20 per box
N95
8210 PLUS 20 per box
N95
8210 PLUS PRO 10 per box
N95
8210V 10 per box N95
8211 10 per box Dusty conditions
N95
8240
Cool Flow Valve
TM
M-Nose Clip
Face Seal
Advanced Electret Media
Carbon Filter Material
Cake Resistant Media
Adjustable Straps
• Grinding, bagging, sawing sanding, sweeping • Nose clip with foam padding • Other dusty operations
Item # 13513 • Grinding, bagging, sanding, sweeping • Other dusty operations • Lightweight construction • Available in SM sizes-8110S Item #13518 Item # 13515 • Grinding, bagging, sanding, sweeping, sawing, foundries • Other dusty operations • Soft braided straps and staple free attachment Item # 13517 • Grinding, bagging, sanding, sweeping, sawing, foundries • Other dusty operations • Soft braided straps and staple free attachment Item # 21231 • Grinding, bagging, sanding, sweeping • Other dusty operations • Nose clip with foam padding
Item # 13530 • Grinding, bagging, sanding, sweeping, buffing, cement, poultry, textile, lime • Other dusty/hot operations
Item # 13531 • Grinding, machining, sanding, sweeping • Other dusty/oily operations
20 per box
R95
8511 10 per box
N95
8511 PRO 5 per box
N95
8271
Item # 13581 • Grinding, bagging, sanding, sweeping • Other dusty/hot operations • Soft braided straps
Item # 13502 • Grinding, bagging, sanding, sweeping • Other dusty/hot operations • Soft braided straps
Item # 21232 • Grinding, machining, sanding, sweeping • Other dusty/hot/oily operations
10 per box
P95
9105 50 per box
N95
9210+ 20 per box
N95
9211+ 10 per box
N95 SEE WARNING ON PAGE 71
Item # 13576 • Sweeping, sanding, grinding, sawing, bagging, laboratories, food preparation, general maintenance • V-shaped pleats flex with mouth movement for easier talking • Available in SM size – 13588 Item # 13587 • Individually wrapped • Grinding, bagging, sanding, sweeping • 3-panel flat fold design adjusts to fit any face shape • Individually wrapped
Item # 28441 • Grinding, bagging, sanding, sweeping • 3-panel flat fold design adjusts to fit any face shape • Individually wrapped
Item # 28445 CLASSIFICATIONS N Not Oil Resistant* R Oil Resistant** P Oil Proof**
EFFICIENCY LEVELS# 95 95% Efficiency 100 99.97% Efficiency
*against solid and liquid aerosols that do not contain oil. **against solid and liquid aerosols including oils (time restrictions may apply see user instructions). # Tested against particles approximately 0.3 micron in size (mass median aerodynamic diameter)
101
RESPIRATORS Product # STD/CTN/QTY Suggested Classification Applications
8246 20 per box
Dusty conditions/ Nuisance odors
R95
8247 20 per box
R95
8516 10 per box
N95
8576 10 per box
P95
8577 10 per box
P95
8212
Cool Flow Valve
TM
• Aluminum smelting, paper processing, brewing operations, glass etching, chemical processing
M-Nose Clip
Face Seal
Advanced Electret Media
Carbon Filter Material
Cake Resistant Media
Adjustable Straps
AG*
Item # 13583 • Foundry operations, undercoating, lab settings, agriculture, petrochemical processing
OV*
Item # 13585 • Aluminum smelting, paper processing, brewing operations, glass etching, chemical processing
AG*
Item # 13586 • Aluminum smelting, paper processing, brewing operations, glass etching, chemical processing
AG*
Item # 13577 • Foundry operations, undercoating, lab settings, agriculture, petrochemical processing
OV*
Item # 13580 • Welding, torch cutting, brazing, soldering, metal pouring
10 per box
Welding and Metal Pouring
N95
8512
Item # 13510 • Welding, torch cutting, brazing, soldering, metal pouring
10 per box
N95
8214 10 per box
N95
8514 10 per box
N95
8515
Item # 13582 • Welding, torch cutting, brazing, soldering, metal pouring, stainless, galvanized
Item # 13575 • Welding, torch cutting, brazing, soldering, metal pouring, stainless, galvanized
Item # 13584
OV* Oz.* OV* Oz.*
• Welding, torch cutting, brazing, soldering, metal pouring
10 per box
N95
8233***
Item # 13492 • Lead, arsenic, cadmium, welding, pharmaceutical manufacturing
Class 100
1 per box
N100
8293***
Item # 13578 • Lead, arsenic, cadmium, welding, pharmaceutical manufacturing
1 per box
P100
Item # 13579
AG* = Nuisance level refers to concentrations below the OSHA PEL or applicable government exposure limits, whichever is lower. OV* = Nuisance level refers to concentrations below the OSHA PEL or applicable government exposure limits, whichever is lower. Oz.* = 3M recommended for oz.one protection up to 10 times the OSHA PEL. NOTE: This product is not NIOSH approved for oz.one protection. 8233*** & 8293*** = Substance specific regulated particles include but are not limited to lead, cadmium, arsenic, 4,4”-methylenedianiline (MDA) in concentrations up to 10 x the OSHA PEL. Do not use for asbestos exposures.
WARNING!
102
These respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the USER Instructions provided as a part of the product packaging. A written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see packaging instructions, supervisor, or call 3M PSD Technical Service in USA at 1-800-243-4630 and in Canada at 1-800-267-4414.
Decorating Services
LOGO. LEADER. is ERB Safety’s in-house
product customization service which includes pad print, screen print, vinyl heat transfer as well as other custom services. We maximize logo sizing to best show logos on each product.
ERB Safety Custom Decorating Services
CALL TO ORDER! 855-621-9100
YOUR LOGO HERE
Pad Printing
See 2017 price list for program details Head Protection – All hard hats can be printed on the front, sides and/or back with up to four spot colors. Minimum quantity is 12 each. Eye Protection – most all styles can be printed on one temple or one color lens. Minimum quantity is 60 pairs.
Screen Printing/Vinyl Heat Seal
See 2017 price list for program details Aware Wear high visibility apparel includes: vests, t-shirts, sweatshirts, bandanas, boonie hats, jackets, rainwear and more. Minimum order is 12 garments. Gloves – our most popular logo’d gloves are ERB Safety’s Mechanics Gloves styles: M100, M200, M300. Minimum is 36 pair.
Other Customization Services
• Custom color head protection, provide PMS color • Custom fill New Hire Kits • Custom packaged products per user requirements
YOUR LOGO HERE
Guidelines for Submitting Logo Artwork Vector Files: For the best printing results, artwork should be provided as a VECTOR file. • All fonts MUST be converted to outlines • Accepted applications for providing vector file formats: Adobe Illustrator (.AI, .EPS), Corel Draw (.CDR)
YOUR LOGO HERE
Other File Formats:
YOUR LOGO HERE
Although not recommended, certain high resolution image file formats (.JPG, .PNG, .PSD, .TIF, .PDF), may be used providing they meet the approval of our graphics department and ERB printing specifications below. • Artwork files must have a minimum resolution of 300 DPI • Artwork files must be 100% of the final output size • .JPG files must be saved at the maximum quality level • Accepted applications for providing high-resolution image files: Adobe Photoshop (.JPG, .PNG, .PSD, .TIF, .PDF) Unacceptable Artwork Formats: The following files ARE NOT acceptable for printing. • Images with resolutions less than 300 DPI • Images downloaded from the Internet or websites
YOUR LOGO HERE
• Highly compressed .JPG images (saved at low quality level) • Images taken from screen captures • Photocopies, business cards, stationary, drawings, decals, faxes or other hard copy artwork • .BMP or .GIF files
If your artwork does not meet our printing requirements and must be re-created, we offer artwork creation services for a fee. This might add extra time to product delivery date.
103
Customization Services available on these products and more Hard Hats
2017 ERB Safety Products Catalog
page 12
Eye Wear
page 103
Aware Wear
ERB Safety 1 Safety Way Woodstock, GA 30188 Phone: 770.926.7944 Toll free: 800.800.6522 www.e-erb.com
page 84
Glove
page 91
Š Copyright 2017