DUST COMPLIANCE MADE SIMPLE
DUST COMPLIANCE MADE SIMPLE
FLOOR
TO
MILWAUKEE® provides universal dust extraction solutions that deliver the simplest way to be compliant for the lowest cost of ownership.
HAMMERVAC™ M12™ Universal Dust Extractor Kit 2306-22
CEILING
SDS Plus DUST TRAP™ Drilling Shroud 48-03-3035
DRILLING
CHIPPING
DUST MANAGEMENT Whether drilling, chipping, cutting or surfacing, MILWAUKEE® offers a full range of dust management solutions for the most common silica-producing applications.
SURFACING
CUTTING
COMPLIANCE
SOLUTION
1
MILWAUKEE® is committed to providing safe and versatile silica dust management solutions that help address the OSHA regulation on respirable crystalline silica dust (29 CFR 1926.1153). MILWAUKEE® dust management solutions are focused on enhancing productivity. From the most universal dust extraction solutions fitting all major brands to a full range of products for floor-to-ceiling dust management, this is compliance made simple.
milwaukeetool.com/dust-management
FOLLOW THE STEPS BELOW 1
PICK YOUR APPLICATION DRILLING______________________________________________________________________________________
3 – 10
CUTTING_______________________________________________________________________________________ 11 – 12 SURFACING________________________________________________________________________________
13 – 14
CHIPPING_________________________________________________________________________________________ EXTRACTOR VACUUMS
2
15
___________________________________________________________ 16 – 17
REVIEW PRODUCT CAPABILITIES CHART Review the capabilities charts on each page to find the best dust solution product for your application needs.
TABLE 1 OR OBJECTIVE DATA
WHAT TOOL YOUR EXTRACTOR WILL ATTACH TO SDS PLUS
OBJECTIVE DATA
SMALL ANGLE GRINDER
MAX DEPTH DRILLING DEPTH
LARGE ANGLE GRINDER
MAX WIDTH DRILLING DIAMETER
CUTTING DEPTH
CHIPPING DIAMETER
CUTTING / GRINDING DIAMETER
1" 4"
≤ 5/8"
WITH 5" BLADE
5"
1-1/8"
MILWAUKEE SOLUTIONS CHART___________________________________________ ®
18 – 21
Pair your existing MILWAUKEE product to a MILWAUKEE Dust Extraction Unit. ®
®
COMPLIANCE METHODS TABLE 1
OBJECTIVE DATA
Rotary Drilling / Chipping Drill or chip with a commercial dust collection system. Filtration must have a minimum 99% efficiency and a filter cleaning mechanism.
Reference milwaukeetool.com for details on objective data
(Compliance through OSHA’s Specified Control Methods)
Cutting / Grinding Use a shroud that is attached to a dust extractor with a suction rate of at least 25CFM per inch of wheel diameter. The dust extractor filter must have a minimum 99% efficiency and a filter cleaning mechanism.
Data provided by the manufacturer that demonstrates users are below the PEL (Permissible Exposure Limit) when using engineered control methods such as MILWAUKEE® HAMMERVAC™ Units or Dust Shrouds.
2
UNIVERSAL
FITS ALL BRANDS
INDUSTRY’S ONLY UNIVERSAL DUST EXTRACTOR M12™ HAMMERVAC™ UNIVERSAL DUST EXTRACTOR 2306-20
Auto-On Mode Allows Extractor to Turn it On and Off
Self-Powered by M12™ REDLITHIUM™ Battery Pack No cords or hoses necessary for maximum portability
Replaceable HEPA Filter
Universal Handle System Compatible with most SDS Plus rotary hammers and some AC and DC hammer drills
Highest quality debris filtration and lowest cost of ownership
TM
PORTABLE PRODUCTIVITY TRADE FOCUSED SYSTEM WIDE
DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
SDS PLUS
3
DRILLING DEPTH
4"
DRILLING DIAMETER
≤ 5/8"
UNIVERSAL
COMPLIANCE
OSHA SOLUTION
FITS ALL BRANDS
WITHOUT
A VACUUM
SDS PLUS DUST TRAP™ DRILLING SHROUD 48-03-3035
Universal Fit Fits most common SDS Plus Rotary Hammers
Vacuum Port For optional use with dust extractors
Clear Sleeve For maximum visibility and accuracy
Removable Sleeve Compact Collapsible Design
For easy bit swap
Locking Mechanism
For increased accessibility and easy storage
For storage
OBJECTIVE DATA
DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
With 8960-20 on Pg. 17
SDS PLUS
OBJECTIVE DATA
DRILLING DEPTH
5-1/2"
DRILLING DIAMETER
≤ 7/8" Including stop bits
4
DRILLING
UP TO 2X FASTER CHEMICAL ANCHOR PREP SDS PLUS VACUUM BITS
Universal Hose Adapter
4-Cutter Tip
Connects to most common dust extractors
For durability in concrete and concrete with rebar
Hollow Shaft Dust Extraction Holes
Provides clean holes for faster chemical anchor installations
Reduce airborne silica dust
SDS PLUS DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
DRILLING DEPTH
7-7/8" to 9-1/2"
SDS PLUS With 8960-20 on Pg. 17
5
DIAMETER
USABLE LENGTH
OVERALL LENGTH
PART NO.
7/16"
7-7/8"
13"
48-20-2102
1/2"
7-7/8"
13"
48-20-2106
9/16"
9-1/2"
14"
48-20-2110
5/8"
9-1/2"
14"
48-20-2114
3/4"
9-1/2"
14"
48-20-2118
DRILLING DIAMETER
7/16" to 3/4"
SDS PLUS VACUUM BIT ADAPTER
48-20-2100
DRILLING
UP TO 2X FASTER CHEMICAL ANCHOR PREP SDS MAX VACUUM BITS
Universal Hose Adapter
4-Cutter Tip
Connects to most common dust extractors
For durability in concrete and concrete with rebar
Hollow Shaft Dust Extraction Holes
Provides clean holes for faster chemical anchor installations
Reduce airborne silica dust
SDS MAX DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
DRILLING DEPTH
15-3/4" to 27-1/2" With 8960-20 on Pg. 17
DIAMETER
USABLE LENGTH
OVERALL LENGTH
PART NO.
5/8"
15-3/4"
23-1/2"
48-20-2152
3/4"
15-3/4"
23-1/2"
48-20-2156
7/8"
15-3/4"
23-1/2"
48-20-2160
1"
17-1/2"
25-1/4"
48-20-2164
1-1/8"
27-1/2"
35"
48-20-2168
1-3/8"
27-1/2"
35"
48-20-2172
DRILLING DIAMETER
5/8" to 1-3/8"
SDS MAX VACUUM BIT ADAPTER
48-20-2150
6
DRILLING
SDS MAX DUST EXTRACTION ATTACHMENT 5317-DE
Vacuum Assisted Suction OSHA Compliant
Adheres to even and uneven surfaces
When used with MILWAUKEE® 8 Gallon Dust Extractor (8960-20)
Quick and Easy Attachment to MILWAUKEE ® Hose Clip Adapter (49-90-1959)
Removable Brush Rings Rubber Seal Ensures Dust Containment
For up to 2-3/4" drilling and coring applications
DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
DRILLING DEPTH
SDS PLUS With 8960-20 on Pg. 17
7
DRILLING DIAMETER
≤ 2-3/4" UNLIMITED
DRILLING
VACUUM ASSISTED DUST EXTRACTOR 5261-DE
Easy Attachment System Dust Extractor Nozzle SDS Plus bit fits through nozzle during drilling to collect dust
Universal Collar System Fits any SDS Plus rotary hammer
Vacuum Attachment System
Adjustable Depth Stop and Ruler
Optimized for MILWAUKEE® (8960-20) 8 Gallon Dust Extractor
Universal Handle System Compatible with major brands of SDS Plus rotary hammers
DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
SDS PLUS
DRILLING DEPTH
4"
DRILLING DIAMETER
≤ 5/8"
With 8960-20 on Pg. 17
8
DRILLING
M18™ HAMMERVAC™ DEDICATED DUST EXTRACTOR 2715-DE
Dedicated for the M18 FUEL™ 1-1/8" SDS Plus Rotary Hammer (2715-20)
Adjustable Depth Stop and Ruler Easily and precisely adjusts for accurate hole depths
High Capacity Dust Box Work longer without emptying dust box as often
Replaceable Certified HEPA Filter
Dust Containment Box Built-in cleaning mechanism achieves OSHA Table 1 Compliance for better suction over time
Filters 99.97% of all particles greater than 0.3 μm
DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
DRILLING DEPTH
DRILLING DIAMETER
*
4"
≤ 5/8"
Fits 2715-20
9
*HAMMERVAC™ units sold before 2018 are objective data. Replacement dust containment box available, model number 49-90-2342.
DRILLING
M18™ HAMMERVAC™ DEDICATED DUST EXTRACTOR 2712-DE
Dedicated for the M18 FUEL™ 1" SDS Plus Rotary Hammer (2712-20)
Adjustable Depth Stop and Ruler Easily and precisely adjusts for accurate hole depths
High Capacity Dust Box Work longer without emptying dust box as often
Replaceable Certified HEPA Filter
Dust Containment Box Built-in cleaning mechanism achieves OSHA Table 1 Compliance for better suction over time
Filters 99.97% of all particles greater than 0.3 μm
DRILLING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
DRILLING DEPTH
DRILLING DIAMETER
*
4"
≤ 5/8"
Fits 2712-20
*HAMMERVAC™ units sold before 2018 are objective data. Replacement dust containment box available, model number 49-90-2342.
10
CUTTING
CUTTING DUST SHROUD 49-40-6110
Quick and Easy Attachment to MILWAUKEE® Hose Clip Adapter (49-90-1959)
Guide Plate For consistent depth of cut
Easily Adjust Cut Depth
CUT TING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
CUTTING DEPTH
CUTTING DIAMETER
1" With 8960-20 on Pg. 17
11
SMALL ANGLE GRINDERS
WITH 5" BLADE
5"
7" / 9" LARGE ANGLE GRINDER CUTTING SHROUD
CUTTING
49-40-6120
Quick and Easy Attachment to MILWAUKEE ® Hose Clip Adapter (49-90-1959)
Easily Adjust Cut Depth 10 Locking positions
Guide Plate For consistent depth of cut
CUT TING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
OBJECTIVE DATA
With 8960-20 on Pg. 17
CUTTING DIAMETER
7" / 9" LARGE ANGLE GRINDERS
12
SURFACING
SURFACE GRINDING DUST SHROUD 49-40-6101
Quick and Easy Installation
Vacuum Attachment System Optimized for MILWAUKEE® (8960-20) 8 Gallon Dust Extractor
Removable Front Clip For grinding against walls
High Density Bristles
SURFACING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
GRINDING DIAMETER
5" With 8960-20 on Pg. 17
13
SMALL ANGLE GRINDERS
SURFACING
7" UNIVERSAL SURFACE GRINDING DUST SHROUD 49-40-6105
Universal Attachment
Vacuum Attachment System
Fits any large angle grinder
Optimized for MILWAUKEE® (8960-20) 8 Gallon Dust Extractor
Removable Front Clip For grinding against walls
High Density Bristles
SURFACING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
OBJECTIVE DATA
With 8960-20 on Pg. 17
GRINDING DIAMETER
7" Fits all Brands of Large Angle Grinders
14
CHIPPING
SDS MAX CHISEL BOOT 5318-DE
Vacuum Attachment System
Security Strap Strap secures hose to rotary hammer allowing for clear line of sight
Optimized for MILWAUKEE® (8960-20) 8 Gallon Dust Extractor
Chisel Attachment
Durable Hose
Holds all bull point and flat chisels less than 1-1/8" wide
CHIPPING CAPABILITIES OSHA COMPLIANT
TYPE OF TOOL
CHIPPING DIAMETER
1-1/8" With 8960-20 on Pg. 17
15
TO
FLOOR
CEILING
DUST MANAGEMENT
UP TO
2X MORE
SUCTION
WEAR, HANG 3X & CARRY QUIETER UP TO
M18 FUELâ„¢ 3-IN-1 BACKPACK VACUUM KIT 0885-21HD, 0885-20 (Tool-Only)
Direct to Hose
Through Adapter
5317-DE
49-40-6110
5261-DE
5318-DE
Adapter Included (0885-20, 0885-21HD)
49-40-6101 OBJECTIVE DATA
0885 ADDITIONAL ACCESSORIES
HEPA Filter 49-90-1963
9' Accessory Hose 49-90-1964
TM
PERFORMANCE DRIVEN TRADE FOCUSED SYSTEM WIDE
16
POWERFUL CONSISTENT SUCTION, CLEANER AIR
TO
FLOOR
CEILING
DUST MANAGEMENT
8 GALLON DUST EXTRACTOR 8960-20
Powerful Motor
Automatic Filter Cleaning Mechanism
148 CFM and 92" Water Lift
Self cleaning every 15 seconds to help maintain consistent airflow
Tool Activated Outlet
2-Step Filtration System (Main Filter and HEPA Filter)
Quiet Operation 69dB
Main PTFE filter acts as first filtration method, air then flows through HEPA filter which captures the remaining small and hazardous dust particles
DRILLING
13 Foot Anti-Static Hose
CHIPPING
SDS PLUS
SURFACING
CUTTING
SMALL ANGLE GRINDER
SMALL ANGLE GRINDER
Surface Grinding Dust Shroud 49-40-6101
Cutting Dust Shroud 49-40-6110
LARGE ANGLE GRINDER
LARGE ANGLE GRINDER
7" Universal Surface Grinding Dust Shroud 49-40-6105
7" / 9" Large Angle Grinder Cutting Shroud 49-40-6120
SDS Max Dust Extraction Attachment 5317-DE
SDS Max Chisel Boot 5318-DE SDS PLUS
Vacuum Assisted Dust Extractor 5261-DE SDS PLUS
Vacuum Bits
SDS PLUS
SDS Plus DUST TRAPâ„¢ Drilling Shroud 48-03-3035
17
FIND THE RIGHT DUST SOLUTION FOR YOUR MILWAUKEE PRODUCT ®
Tool
Attachment
Adapter
Extractor
Compliance Method Table 1
Objective Data
SDS Plus
2715-22HD, 2715-22 (2715-20 Tool-Only)
2712-22HD, 2712-22 (2712-20 Tool-Only)
N/A
Integrated
N/A
Integrated
N/A
None
N/A
None
HAMMERVAC™ Dedicated Dust Extractor 2715-DE
HAMMERVAC™ Dedicated Dust Extractor 2712-DE
SDS Plus Rotary Hammers 2412-22XC (2412-20 Tool-Only)
M12™ HAMMERVAC™ Universal Dust Extractor 2306-20/22
2416-22XC (2416-20 Tool-Only)
2605-22 (2605-20 Tool-Only)
SDS Plus DUST TRAP™ Drilling Shroud 48-03-3035
2612-22, 2612-21 (2612-20 Tool-Only)
2712-22HD, 2712-22 (2712-20 Tool-Only)
SDS Plus DUST TRAP™ Drilling Shroud 48-03-3035
Power Tool Adapter* 49-90-1957
SDS Plus Vacuum Bits
Power Tool Adapter* 49-90-1957
2713-22HD, 2713-22 (2713-20 Tool-Only)
2715-22HD, 2715-22 (2715-20 Tool-Only)
8 Gallon Dust Extractor 8960-20
5262-21
5263-21
5268-21
Vacuum Assisted Dust Extractor 5261-DE
*Included in the 8 Gallon Dust Extractor (8960-20).
Hose Sleeve* 49-90-1958
18
Tool
Attachment
Adapter
Extractor
Compliance Method Table 1
SDS Max
2717-22HD (2717-20 Tool-Only) SDS Max Dust Extraction Attachment 5317-DE
Hose Clip Adapter * 49-90-1959 5317-21
SDS Max Chisel Boot 5318-DE
5426-21
8 Gallon Dust Extractor 8960-20 SDS Max Vacuum Bits
Power Tool Adapter * 49-90-1957
5446-21
5342-21
SDS Max Chisel Boot 5318-DE
5339-21
19
*Included in the 8 Gallon Dust Extractor (8960-20).
Hose Clip Adapter* 49-90-1959
Objective Data
FIND THE RIGHT DUST SOLUTION FOR YOUR MILWAUKEE PRODUCT ®
Tool
Attachment
Adapter
Extractor
Compliance Method Table 1
Objective Data
Small Angle Grinders
6141-30
6141-31
6142-30
6142-31
Hose Clip Adapter * 49-90-1959
2780-22HD, 2780-22, 2780-21 (2780-20 Tool-Only)
+ Surface Grinding Dust Shroud 49-40-6101
2781-22HD, 2781-22, 2781-21 (2781-20 Tool-Only)
Dust Extraction Adapter * 49-90-1960
2783-22HD, 2783-22, 2783-21 (2783-20 Tool-Only)
8 Gallon Dust Extractor 8960-20
6117-30
6117-31
6117-33
Cutting Dust Shroud 49-40-6110
6117-33D
6121-30
6121-31 *Included in the 8 Gallon Dust Extractor (8960-20).
Hose Clip Adapter * 49-90-1959
20
Tool
Attachment
Adapter
Extractor
Compliance Method Table 1
Objective Data
Small Angle Grinders
6121-31A Hose Clip Adapter * 49-90-1959
+
6124-30
6124-31
Surface Grinding Dust Shroud 49-40-6101
6146-33 Dust Extraction Adapter * 49-90-1960
8 Gallon Dust Extractor 8960-20
6161-30
6161-31 Cutting Dust Shroud 49-40-6110
Hose Clip Adapter * 49-90-1959
6161-33
Large Angle Grinders
6088 7" Universal Surface Grinding Dust Shroud 49-40-6105
Power Tool Adapter * 49-90-1957
6089 8 Gallon Dust Extractor 8960-20
2785-22HD, 2785-21HD, (2785-20 Tool-Only)
7" / 9" Large Angle Grinder Cutting Shroud 49-40-6120
Hose Clip Adapter * 49-90-1959
*Included in the 8 Gallon Dust Extractor (8960-20).
COMPLIANCE METHODS TABLE 1
(Compliance through OSHA’s Specified Control Methods) Rotary Drilling / Chipping Drill or chip with a commercial dust collection system. Filtration must have a minimum 99% efficiency and a filter cleaning mechanism. Cutting / Grinding Use a shroud that is attached to a dust extractor with a suction rate of at least 25CFM per inch of wheel diameter. The dust extractor filter must have a minimum 99% efficiency and a filter cleaning mechanism.
21
OBJECTIVE DATA
Data provided by the manufacturer that demonstrates users are below the PEL (Permissible Exposure Limit) when using engineered control methods such as MILWAUKEE® HAMMERVAC™ Units or Dust Shrouds. Reference milwaukeetool.com for details on objective data
FOR ADDITIONAL RESOURCES GO TO milwaukeetool.com/dust-management
DUSTCATALOG 18MTT3020 9/18
© 2018 Milwaukee Tool