CONCRETE ACCESSORIES - 100 Years of Strength -
-STEEL/PLYWOOD FORMING SYSTEMS
-FORMING HARDWARE
-REBAR SUPPORTS STEEL AND PLASTIC
OCM, Inc. 1215 Henri Drive Wauconda, IL 60084 Telephone: 866-457-5710 FAX: 847-462-4259 www.ocm-inc.com
-ADEKA AND BENTOSWELL WATERSTOPS
www.ocm-inc.com
Table of Contents Waterstop Adeka Ultra Seal. . . . . . . . . . . . . . . . . 4 Ultra-C-Ring . . . . . . . . . . . . . . . . . . . . 8 OCM BENTOSWELL. . . . . . . . . . . . . . 9
Waler Tie. . . . . . . . . . . . . . . . . . . . . . Strongback Tie . . . . . . . . . . . . . . . . . Metal Form Patches . . . . . . . . . . . . . Pipe Braces. . . . . . . . . . . . . . . . . . . .
30 30 30 30
Forming Hardware Coil Thread Products Coil Nut. . . . . . . . . . . . . . . . . . . . . . . Coil Bolt. . . . . . . . . . . . . . . . . . . . . . . Long Coil Bolt. . . . . . . . . . . . . . . . . . Heavy Duty “Tall” Coil Nut. . . . . . . . . Coil Rod. . . . . . . . . . . . . . . . . . . . . . . Coil Rod Coupler. . . . . . . . . . . . . . . . Weld Angle Bracket. . . . . . . . . . . . . . Coil Wing Nut . . . . . . . . . . . . . . . . . . Coil Thread Drop In Anchors. . . . . . . Coil Eye Bolt . . . . . . . . . . . . . . . . . . . Coil Eye Nut. . . . . . . . . . . . . . . . . . . . Batter Washers . . . . . . . . . . . . . . . . . Fitting Up “Speed” Bolt. . . . . . . . . . . Fitting Up “Speed” Nut. . . . . . . . . . . Flat Washer. . . . . . . . . . . . . . . . . . . . 1/2” Coil Tie - Conefast. . . . . . . . . . . 3/4” Coil Tie - Conefast. . . . . . . . . . . Conefast Plastic Cone. . . . . . . . . . . . Cone Wrench. . . . . . . . . . . . . . . . . . . 1/2” Coil Tie - Standard. . . . . . . . . . 3/4” Coil Tie - Standard. . . . . . . . . . Combo Tie. . . . . . . . . . . . . . . . . . . . . Coil Loop Inserts. . . . . . . . . . . . . . . .
14 14 14 14 14 15 15 15 15 15 15 16 16 16 16 16 17 17 17 17 17 18 18
Light Duty Forming Products Snap Tie . . . . . . . . . . . . . . . . . . . . . . Snap Tie with Cring 25-UCR. . . . . . . Snap Tie Heavy Duty. . . . . . . . . . . . . Snap Tie Wedge . . . . . . . . . . . . . . . . A Clamp. . . . . . . . . . . . . . . . . . . . . . . C Clamp. . . . . . . . . . . . . . . . . . . . . . . Snap Tie Extender. . . . . . . . . . . . . . . Snap Bracket. . . . . . . . . . . . . . . . . . . Form Liner Clamp. . . . . . . . . . . . . . . Jahn Scaffold Bracket. . . . . . . . . . . . A-90 Scaffold Bracket Jack. . . . . . . Double Waler Bracket. . . . . . . . . . . . Snap Tie Corner Lock. . . . . . . . . . . . Speed Lock Tie. . . . . . . . . . . . . . . . . Speed Lock Stiff Back Bracket. . . . . Speed Lock Bracket. . . . . . . . . . . . .
18 19 19 19 19 20 20 20 20 20 20 20 21 21 21 21
Light Duty Forming Products Aluminum Form Tie. . . . . . . . . . . . . . Aluminum Form Pin. . . . . . . . . . . . . . Aluminum Form Wedge. . . . . . . . . . . Silver Bullet Base Pin . . . . . . . . . . . . Aluminum Form Angle Pin. . . . . . . . . Aluminum Form Accessories. . . . . . . Aluminum Form Waler Brackets. . . . Aluminum Form. . . . . . . . . . . . . . . . . Resi-Ply Form Tie . . . . . . . . . . . . . . . Pencil Rod. . . . . . . . . . . . . . . . . . . . . Pencil Rod Clamp. . . . . . . . . . . . . . . Pencil Rod Puller. . . . . . . . . . . . . . . . Metal Keyway . . . . . . . . . . . . . . . . . . Metal Keyway Stakes . . . . . . . . . . . . Steel Stakes. . . . . . . . . . . . . . . . . . . . Stake Puller. . . . . . . . . . . . . . . . . . . . Dowel Cap. . . . . . . . . . . . . . . . . . . . . Plastic Dowel Cap. . . . . . . . . . . . . . . Smooth Dowel. . . . . . . . . . . . . . . . . . Spreader Cleats. . . . . . . . . . . . . . . . . Monolithic Pouring Straps. . . . . . . . . Stacking Tie (Snapie Tie). . . . . . . . . . Stacking Tie Wedge. . . . . . . . . . . . . . Screed Pads & Posts. . . . . . . . . . . . . Screed Hooks . . . . . . . . . . . . . . . . . . Footing Ties. . . . . . . . . . . . . . . . . . . . Anchor Bolt. . . . . . . . . . . . . . . . . . . . Flat Washer for Anchor Bolt . . . . . . . Anchor Bolt Nuts. . . . . . . . . . . . . . . . Anchor Bolt Washers. . . . . . . . . . . . . T-Posts. . . . . . . . . . . . . . . . . . . . . . . . Rebar Cap. . . . . . . . . . . . . . . . . . . . . Punched Hole Strapping. . . . . . . . . . Burke Bar / Pry Bar. . . . . . . . . . . . . .
30 31 31 31 31 31 31 32 33 33 33 33 33 34 34 34 34 34 35 35 35 35 35 36 36 36 36 37 37 37 37 37 37 37
Steel-Plywood Forms and Accessories Handset Concrete Forming System. 22 X Flat Tie. . . . . . . . . . . . . . . . . . . . . . 26 X Flat Tie - Heavy Duty. . . . . . . . . . . 26 Loop Tie (Loop Panel Tie). . . . . . . . . 27 Cring 25-UCR-H . . . . . . . . . . . . . . . . 27 Base Tie. . . . . . . . . . . . . . . . . . . . . . . 27 Wedge Bolt . . . . . . . . . . . . . . . . . . . . 28 Long Wedge Bolt. . . . . . . . . . . . . . . . 28 Short Wedge Bolt . . . . . . . . . . . . . . . 28 Gang Wedge Bolt . . . . . . . . . . . . . . . 28 Turnbuckles. . . . . . . . . . . . . . . . . . . . 28 Heavy Duty Turnbuckles. . . . . . . . . . 28 Hand-Set Scaffolding Bracket. . . . . . 28 One Piece Waler Clamp . . . . . . . . . . 29 One Piece Waler Clamp - Heavy Duty. 29 Z Tie Holder. . . . . . . . . . . . . . . . . . . . 29 J-Strongback Hook. . . . . . . . . . . . . . 29 Ply-Lag. . . . . . . . . . . . . . . . . . . . . . . 29 Gang Waler Plate. . . . . . . . . . . . . . . . 29 S-Wedge . . . . . . . . . . . . . . . . . . . . . . 29
Rebar Hand Tools and Accessories Rebar Cutter-Bender. . . . . . . . . . . . . 38 Rebar Hickey Bender . . . . . . . . . . . . 38 Rebar Hickey. . . . . . . . . . . . . . . . . . . 38 Tie Wire. . . . . . . . . . . . . . . . . . . . . . . 38 Binding Wire . . . . . . . . . . . . . . . . . . . 38 Tie Wire Reel. . . . . . . . . . . . . . . . . . . 38 Bag Tie . . . . . . . . . . . . . . . . . . . . . . . 38 Bag Tie Hand Twister . . . . . . . . . . . . 38 Heavy Duty Forming Products She-Bolt. . . . . . . . . . . . . . . . . . . . . . . Taper Tie . . . . . . . . . . . . . . . . . . . . . . Coil Nut Washer. . . . . . . . . . . . . . . . . Acme Nut Washer. . . . . . . . . . . . . . . Bridge Forming Hardware Bridge Forming Products Bridge Overhang Bracket . . . . . . . . . Bridge Overhang Bracket Deep . . . . Bridge Overhang Bracket 72”. . . . . . Bridge Overhang Bracket Super Duty . . . . . . . . . . . . . . . . . . . Bridge Overhang Bracket Junior. . . . . . . . . . . . . . . . . . . . . . . . Bridge Overhang Bracket Western. . . . . . . . . . . . . . . . . . . . . . Bridge Overhang Bracket Extension. . . . . . . . . . . . . . . . . . . . . Bridge Overhang Bracket
41 41 41 41
42 42 42 42 42 42 43
Guard Rail Receptacle . . . . . . . . . . Conversion Kit. . . . . . . . . . . . . . . . . . Wall Plate Assembly . . . . . . . . . . . . . Hook Bolt D1LA. . . . . . . . . . . . . . . . .
43 43 43 43
Bridge Hangers Exterior Bridge Hangers . . . . . . . . . . 44 Interior Bridge Hangers. . . . . . . . . . . 46 Bar Supports Steel Bar Supports Slab Bolsters. . . . . . . . . . . . . . . . . . . Beam Bolsters. . . . . . . . . . . . . . . . . . Continuous Mesh Chair. . . . . . . . . . . Continuous High Chairs . . . . . . . . . . Individual High Chairs. . . . . . . . . . . . Individual Bar Chairs. . . . . . . . . . . . . Footer Chairs. . . . . . . . . . . . . . . . . . . Rod Chairs. . . . . . . . . . . . . . . . . . . . . FS Stakes . . . . . . . . . . . . . . . . . . . . .
48 48 50 50 51 52 52 52 52
All Plastic Bar Supports Plastic Uni Chair . . . . . . . . . . . . . . . . Plastic Slab Bolster. . . . . . . . . . . . . . Plastic Paving Chairs. . . . . . . . . . . . . Grade Chair with Base . . . . . . . . . . . Wheel Spacers . . . . . . . . . . . . . . . . . Castle Chairs. . . . . . . . . . . . . . . . . . . Concrete Sleeves . . . . . . . . . . . . . . . Rebar Saddle. . . . . . . . . . . . . . . . . . . Adjustable Plastic Screed Chair . . . .
54 55 56 56 56 57 57 57 57
Other Concrete Accessories EURO Rod Products Euro Rod. . . . . . . . . . . . . . . . . . . . . . Euro Rod Combo Plate. . . . . . . . . . . Euro Rod Single Wing Nut. . . . . . . . Euro Rod Round Wing Nut. . . . . . . . Euro Rod Hex Couplers. . . . . . . . . . . Euro Rod Hex Flange Nuts. . . . . . . . Euro Rod Round Huts with Hex End. . . . . . . . . . . . . . . . . . Euro Rod She Bolt Cones. . . . . . . . . Weld Angle Bracket - Euro Thread. .
58 59 59 59 59 59 60 60 60
Scaffolding/Shoring Products 4x4 Shore Clamp. . . . . . . . . . . . . . . . 4x4 Shore Jack. . . . . . . . . . . . . . . . . Wire Shore Holder. . . . . . . . . . . . . . . Reshore Spring. . . . . . . . . . . . . . . . . Slab Grabber. . . . . . . . . . . . . . . . . . .
60 60 60 60 61
Precast Products Coil and Ferrule Inserts. . . . . . . . . . . Precast Lifting Anchors. . . . . . . . . . . Lifting Eye . . . . . . . . . . . . . . . . . . . . . Precast Utility Anchors . . . . . . . . . . . Ring Clutches . . . . . . . . . . . . . . . . . . Recess Member . . . . . . . . . . . . . . . . Coil Eye Nut. . . . . . . . . . . . . . . . . . . . Coil Eye Bolt . . . . . . . . . . . . . . . . . . .
63 63 63 63 63 63 63 63
Miscellaneous Products OCM Mesh Form. . . . . . . . . . . . . . . . Form Release. . . . . . . . . . . . . . . . . . . Concrete Hoppers. . . . . . . . . . . . . . . Masonry Wire/Ladder Mesh . . . . . . .
64 65 66 67
Rebar Splicing Products OS-Splice Clip. . . . . . . . . . . . . . . . . . 69 Contact Information & Warranty. . . . . 71
OCM’S History A Global Leader In Metal Working OCM, Inc. is a subsidiary of OKABE Co., LTD. OKABE was founded in 1917 in Japan and has been a full service manufacturer and distributor of concrete construction supplies, and a world leader in the Metal Forming Industry for over eighty years. Through capital investment and strategic partnerships, Okabe has achieved sales of over one billion dollars and employs over 1,500 people worldwide. OKABE uses a broad range of metal forming technologies to provide a diverse selection of engineered fasteners and components. OKABE Markets Include: Construction Industry, Concrete Forming Accessories, Waterstop Products, Scaffolding & Shoring Components, Rebar Splicing, Transportation Industry, Heavy and Medium Duty Truck O.E.M.'s, Light & Heavy Duty Trailer O.E.M.'s, Heavy Duty Truck and Trailer Aftermarkets, Automotive & Light Truck O.E.M.'s, Axle & Suspension O.E.M.'s, Wheel, Hub & Drum O.E.M.'s, Agricultural & Construction Machinery O.E.M.'s, and Civilian & Military Marine & Shipbuilding Industries OCM's worldwide manufacturing base coupled with a North American distribution network provides our customers with sophisticated design support, engineered quality and globally competitive products. OCM's global quality policy is one of continuous education, statistical analysis and evaluation of our systems, processes and techniques. We are dedicated to provide the highest quality products, at a competitive price, through innovation and technical expertise and the utmost in customer care. We invite you to visit our website www.ocm-inc.com or contact our sales department at 1-866-457-5710 with your product questions.
OCM Limited Warranty All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and cor-rect;, however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sold discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including any implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM's liability exceed the purchase price paid for the particular affected OCM, Inc. products.
3
Waterstop Products www.ocm-inc.com www.adeka.com
Adeka Ultra Seal – Waterstop Products Adeka Ultra Seal is an innovative “Double-Locking” hydrophilic rubber waterstop. Adeka stops water by compression of the rubber and by hydrophilic expansion pressure when the seal is exposed to water. Adeka has been a leading hydrophilic rubber waterstop since 1977. Benefit
1. Controlled expansion when exposed to water. 2. Easy installation. 3. Stop water leakage by volume (expansion) pressure. 4. Stable expansion ability in a variety of water conditions. (Example seawater, cement water.) 5. Excellent elasticity. MC-2010MN – Hydrophilic strip with embedded stainless steel net. Cross section is 20mm X 10mm, (3/4" X 3/8"). Replaces conventional PVC in non-moving joints. Will withstand 150 foot hydrostatic head pressure. NSF certified for potable water.
MC-2005T
MC-2005T – Hydrophilic strip with adhesive back. Cross section is 20mm X 10mm (3/4" X 1/4"). Typically used for sealing piping penetrations cast-in-place through walls/slabs or through block outs in existing structures. Excellent for stopping water intrusion along cast-in-place H-beams.
KM-3030M – Hydrophilic strip with embedded stainless steel net. Cross section is 30mm X 30mm (11⁄8" X 11⁄8"). Typically used in 1⁄2" expansion joints where expansion does not exceed 1 ⁄2". Excellent for shear movement and isolation joints. KM-3030M
KBA-1510FP
K BA-1510FP – Hydrophilic strip. Cross section is 15mm X 10mm ( 5⁄8" X 3⁄8"). Typically used in precast, non-moving joint where minimal concrete coverage is available (greater than 1"), and concrete containment curbs. Will withstand up to 25 foot hydrostatic head.
4
Waterstop Products www.ocm-inc.com www.adeka.com
KM-String – Hydrophilic string (rope). Cross section size varies from 4mm ~ 24mm (approximately 3⁄16" ~ 1"). Used to waterproof sheet piles and cracks in the presence of running water. String should be 1.2 times the width of the gap being filled. KM-String
P201A – Hydrophilic paste in 11 ounce cartridge or 3.17 gallon pails. One of the most versatile Adeka products. Used in precast segments, piping penetrations, sheet pile interlocks, in combination with other Adeka strip products on rough concrete, crack, joint repair and many other applications.
A30 – Two component hydrophilic liquid in 4 gallon sets. Typically used to seal sheet pile interlocks prior to driving. A-30
75BRTAPE – Butyl Rubber Adhesive Tape. 1/8" x 3/4" (50 ft. roll/8 per case). Used with: MC2010MN; MC2005T; KBA1510FP; KM3030M.
Ultra C Ring – The OCM Ultra C Ring is a clip on hydrophilic waterstop attachment for the form tie. The Ultra C Ring expands when it comes in contact with dampness and therefore seals off water entirely. The innovative feature of the Ultra C Ring is the fact that it can be clipped on after the form tie is completely installed or used to repair a problem.
Typical use and General Condition Construction/ Cold Joint MC2010MN KBA Pre-Formed
KM3030M
O O O
Pipe
Precast
O O
O O
O
MC2005T KM String Liquid/ Paste
P201
Sheet Pile Expansion Joint
O
O
A30
5
O
O O O
Waterstop Products www.ocm-inc.com
ADEKA Ultra Seal
PVC Water Stop
Easy and cost effective installation
Labor intensive installation - more cost
vs. Wired in place
Welding is NOT required on splices or corners
Welding quality is critical for perfect waterstop
2�
vs. Nail or Screw P-201
MC2010MN Application
No chance of collapse
Chance of collapse
vs.
Change of Volume of Adeka Ultra Seal
Before water swelling
After water swelling
6
Waterstop Products www.ocm-inc.com
Applications
Potable Water Tank
Rough Concrete Cold Joint
; 3 %HDG %HWZHHQ 5LVHU 5LQJV 5LVHU 5LQJV
6WHHO 5LP
5LVHU 5LQJV
/LG
3
3
%DUUHO RI 0DQKROH 1RW WR 6FDOH
&URVV 6HFWLRQ RI 0DQKROH ZLWK ULVHU ULQJV
Precast Manhole Joint
Piping Penetration
Sheet Pile Interlock
Tunnel Segment Seal
7
Waterstop Products www.ocm-inc.com
FEATURES+BENEFITS - Prevents water leakage along tie penetrations. - Easy attachment to the tie. - The ULTRA-C-RING is a Hydrophilic Waterstop. (that swells when in contact with water, stops water penetration) - Versatile can be used with : SNAP TIES, LOOP TIES, HEAVY DUTY LOOP TIES, CAM-LOCK TIES. - Can be installed with formwork already assembled. - Proven to be more successful in stopping water penetration than traditional neoprene washer. - Avoid special orders, long lead times, and expedited freight charges.
INSTALLATION
1.
PUSH!!
Place the ULTRA-C-RING onto the Tie
Water Penetration Test Result
2.
3.
Push the Clip down Actual Product Test
ULTRA-C-Ring C-Ring ng g
Done
STD Rubber Washer Rubber Washer
No Leaks!! N
Leaks!!
vs. Water Pressure
Water Pressure
Product Information Part No. 25-UCR 25-UCR-H
For Use With Snap Ties, Standard Loop Ties Heavy Duty Loop Ties, Heavy Duty Snap Ties, Cam-Lock Ties
8
Box Quantity 100 pcs 100 pcs
Waterstop Products www.ocm-inc.com
9
Waterstop Products www.ocm-inc.com
10
Waterstop Products www.ocm-inc.com
11
www.ocm-inc.com
12
www.ocm-inc.com
13
Coil Thread Products www.ocm-inc.com
Coil Nuts H
AC D
OCM Part No. 50ACCN0P 50ACCN0P-G 62SFCN 75SFCN 75SCCN0P 87SCCN0P 100SCCN0P 125SCCN0P 150CCCN
D Size
H Height 0.484 0.484 0.547 0.641 0.734 0.859 0.984 1.219 1.469
1/2" 1/2" 5/8" Finished 3/4" Finished 3/4" Heavy 7/8" 1" 1-1/4" 1-1/2"
AC Across Flats 0.863 0.863 0.930 1.107 1.231 1.416 1.600 2.123 2.682
Carton Qty 500 500 500 500 250 250 150 70 40
Weight per 100pcs lbs 6.2 6.2 11.4 11.4 17.8 27.6 15.0 75.2 122.6
Safe Working Load lbs 6,000 6,000 8,000 9,000 9,000 16,000 18,000 27,000 40,000
Weight per 100pcs lbs 10. 6 12. 8 15. 1 17. 1 19. 4 21. 6 26. 3 30. 7 32. 8 39. 4 42. 7 47. 8 52. 5 62. 5 72. 4 21.8 35. 4
Safe Working Load lbs 4, 125 4, 125 4, 125 4, 125 4, 125 4, 125 4, 125 4, 125 9, 000 9, 000 9, 000 9, 000 9, 000 9, 000 9, 000 7,500 7,500
SWL provides a safety factor of apporoximately 2 to 1.
Coil Bolts
OCM Part No. 50A150CBH0P 50A200CBH0P 50A250CBH0P 50A300CBH0P 50A350CBH0P 50A400CBH0P 50A500CBH0P 50A600CBH0P 75S200CBH0P 75S250CBH0P 75S300CBH0P 75S350CBH0P 75S400CBH0P 75S500CBH0P 75S600CBH0P 62S200CBH0P 62S400CBH0P
Adjustable Coil Bolt Available L
AC
Long Coil Bolts Long Coil Bolts
L
L Length 1-1/ 2" 2" 2-1/ 2" 3" 3-1/ 2" 4" 5" 6" 2" 2-1/ 2" 3" 3-1/ 2" 4" 5" 6" 2" 4"
D Size 1/ 2" 1/ 2" 1/ 2" 1/ 2" 1/ 2" 1/ 2" 1/ 2" 1/ 2" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 5/ 8" 5/ 8"
AC Across Flats 3/ 4" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 1-1/ 8" 1-1/ 8" 1-1/ 8" 1-1/ 8" 1-1/ 8" 1-1/ 8" 1-1/ 8" 1" 1"
Carton Qty 500 500 400 300 250 250 200 150 150 150 100 100 100 75 75 100 100
SWL provides a safety factor of apporoximately 2 to 1.
OCM Part No. 50A1200CBH0P 50A1600CBH0P 50A1800CBH0P 50A2400CBH0P 50A3000CBH0P
D Size 1/2" 1/2" 1/2" 1/2" 1/2"
L Length 12" 16" 18" 24" 30"
AC Across Flats 7/8" 7/8" 7/8" 7/8" 7/8"
Safe Working Load lbs 9,000 9,000 9,000 9,000 9,000
-SWL provides a safety factor of apporoximately 2 to 1. -Includes 1 Running Nut per bolt
L
Heavy Duty “Tall” Heavy Duty Coil Nuts Coil Nuts AC
OCM Part No. 50ACCN0PT 75SCCN0PT 100SSCCN0PTL
D Size 1/2" 3/4" 1"
H Height 1-1/8" 1-1/8" 2"
Coil Rod
AC Across Flats 1-5/16" 1-5/16" 1-3/8"
Carton Qty 1,000 500 500
Weight per 100pcs lbs 6.2 11.4 11.4
Safe Working Load lbs 9,000 18,000 37,500
H
SWL provides a safety factor of apporoximately 2 to 1.
Coil Rod
L
OCMPart No. 50ACTRP144 62ACTRP144 75ACTRP144 OCMPart 87ACTRP144 No. 50ACTRP144 100ACTRP144 75ACTRP144 125ACTRP144 87ACTRP144 100ACTRP144 150ACTRP144 125ACTRP144 150ACTRP144 50ACTRP72 50ACTRP72 75ACTRP72 75ACTRP72 100ACTRP72 100ACTRP72 125ACTRP72 125ACTRP72
L
D size 1/2" 3/4" 7/8" 1" 1-1/4" 1-1/2" 1/2" 3/4" 1" 1-1/4"
D size 1/2" 5/8" 3/4" L 7/8" length 1" 12FT 12FT 1-1/4" 12FT 12FT 1-1/2" 12FT 1/2"12FT 6FT 3/4"6FT 1" 6FT 6FT 1-1/4"
L length 12FT 12FT 12FT Weight per pcs 12FT lbs 6.12FT 4 13.4 20.12FT 04 24.12FT 48 41.76 72.16FT 2 3.2 7.76FT 12.24 6FT 20.8 6FT
-SWL provides a safety factor of apporoximately 2 to 1. -Special Order cut lengths are available by request
14
Weight per pcs lbs 6.4 8.5 13.4 Safe Working 20.04 Load 9,000 24.48 18,000 41.76 31,000 38,000 72.12 56,000 68,000 3.2 9,000 7.7 18,000 38,000 12.24 56,000 20.8
Safe Working Load 9,000 12,000 18,000 31,000 38,000 56,000 68,000 9,000 18,000 38,000 56,000
Coil Thread Products www.ocm-inc.com
Coil Rod Coil Rod Stop Stop Coupler Coupler
D Thread 1/2" 3/4" 1" 1-1/4" 1-1/2"
L L D
D
L Length 2-1/2" 3" 4-1/2" 5-1/2" 7"
OCM Part No. 50A250CTCP 75S300CTCP 100S450CTCP 125S550CTCP 150S700CTCP
Safe Working Load lbs 9,000 18,000 38,000 56,000 67,500
SWL provides a safety factor of apporoximately 2 to 1.
Weld Angle Bracket Weld Angle Bracket 3LYRW %DU 3LYRW %DU
OCM Part No. 50APBP 75SPBP 100SPBP AWB24-1 AWB24-1 AWB24-2
Pivot Bar
Bent Plate
%HQW 3ODWH %HQW 3ODWH
Coil Wing Nut
Coil Wing Nut
OCM Part No. 50CWN OCM 75CWN Part No. 100CWN 50CWN 125CWN 150CWN 75CWN
D Size 1/2" 3/4" D 1" Size 1-1/4"1/2" 1-1/2"3/4"
100CWN 125CWN 150CWN
1" 1-1/4" 1-1/2"
Coil Thread Drop In Anchors
Coil Eye Bolt
OCM Part No. To Order (Call, Fax or e-mail this form) To Order CWN50 1. Part (Call, No. : Fax or e-mail this form) 2. Size : CWN62 3. Quantity : No. : 1. Part 2. Size : CWN75 Phone : 1-866-457-5710 Quantity : Fax 3. : 1-847-541-9338 e-mail : sales@ocm-inc.com CWN87 Phone : 1-866-457-5710 Fax : 1-847-541-9338 CWN100 e-mail : sales@ocm-inc.com Weight per pcs CWN125 lbs 0.65 CWN150 Weight per pcs 0.90 1.07 lbs 1.22 0.65 -SWL provides 2.85 0.90
1.07 1.22 2.85
D Size 1/2" 3/4" 1" 1/2" 3/4" 1"
D Size 1/2" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2"
Weight per each lbs 2.15 2.10 4.85 1.90 1.90 5.85
Weight per pcs lbs 0.65 0.90 0.90 1.07 1.07 1.22 2.85
Safe Working Load lbs 9,000 18,000 31,500 9,000 18,000 31,500
Safe Working Load lbs 9,000 12,000 18,000 31,000 38,000 56,000 68,000
a safety factor of apporoximately 2 to 1.
OCM Part No.
Thread Size
Wt. lbs.
Box Qty.
50CDIA
1/2�
0.12
50
50CDIA-TOOL
1/2�
0.4
1
75CDIA
3/4�
0.5
25
75CDIA-TOOL
3/4�
0.4
1
OCM Part No. 50CEB 75CEB 100CEB
Bolt Diameter in. 1/2 3/4 1
Safe Working Load 2,700 3,600 7,200
A in. 3 1/4 3 1/2 5
B in. 1 5/8 1 3/4 2 3/4
C in. 1 1 1 1/4
D in. 3/4 3/4 1
E in. 2 2 3
SWL provides a safety factor of apporoximately 5 to 1.
Coil Nut Coil Eye Eye Nut H
H
2&0 3DUW 1R &(1 &(1 &(1 &(1
' 6L]H
+ +HLJKW
6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR *Coil Eye Bolts available upon request.
D
D
15
:HLJKW SHU SFV 6DIH :RUNLQJ /RDG OEV OEV
Coil Thread Products www.ocm-inc.com
Batter Washers
Fitting Up Bolts
Fitting Up “Speed” Bolts
OCM Part No. 75F200FUBP 75F300FUBP 75F400FUBP
AC 2"
L
Fitting Up Nuts
Fitting Up “Speed” Nuts
FlatWasher Washer Flat WW
t
LL D D
**Additional lengths available upon request **Waterseal available upon request -SWL provides a safety factor of apporoximately 2 to 1.
0.558 0.604 0.650 0.696 0.742 0.788 0.834 0.880 0.926 1.000 1.100
4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs.
AC Across Flats 1.25" 1.25" 1.25"
Carton Qty 125 85 85
Weight per pc lbs 0.37 0.50 0.62
Grade ASTM A325 ASTM A325 ASTM A325
D Size 3/4" 3/4"
AC Across Flats 1.25" 1.25"
Weight per Carton lbs 43 45
Carton Qty 250 250
Grade ASTM A563 Grade C ASTM A194 Grade 2H
LXWXt
Wt. lbs.
Box Qty.
Safe Working Load lbs
50RC3475FWAP
1/2”
3” X 4” X 1/4”
0.900
50
6,750
50RC4525FWAP
1/2”
4” X 5” X 1/4”
0.900
50
8,750
75RC3475FWAP
3/4”
3” X 4” X 1/4”
1.000
50
6,750
75RC4575FWAP
3/4”
4” X 5” X 1/4”
1.440
50
8,750
75RC4538FWAP
3/4”
4” X 5” X 3/8”
2.850
25
14,000
100RC55716FWAP
1”
5” X 5” X 7/16”
3.300
25
18,000
125RC5558FWAP
1 1/4”
5” X 5” X 5/8”
3.300
15
27,000
150RC7555FWAP
1 1/2”
5” X 5” X 3/4”
5.500
10
27,000
150RC5787FWAP
1 1/2”
5” X 7” X 7/8”
8.000
10
68,000
WATER SWELLING RUBBER(AUS)
100 100 100 100 100 100 100 100 100 100 100
L Length 2" 3" 4"
Box Qty. 25 20 10 Bulk Bulk
D SIZE
OCM Part No. CT5004SP 2 Strut Conefast Coil Tie 1/2" CT5006SP CT5008SP CT5010SP CT5012SP SS CT5014SP NE CK TH I WATERSEAL TYPE TH NG L CT5016SP LE AL E W TI To Order CT5018SP (Call, Fax or e-mail this form) CT5020SP 1. Part No. : 2. Quantity : 3. WallCT5022SP Thickness : 4. Waterstop : CT5024SP Phone : 1-866-457-5710 : 1-847-541-9338 Fax CT5026SP e-mail : sales@ocm-inc.com CT5028SP Weight / pcs Safe Working Load OCM Wall Box Qty CT5030SP lbs lbs Part No. Thickness CT5004SP 4 100 0.320 4,500 lbs. CT5032SP CT5006SP 6 100 0.320 4,500 lbs. CT5008SP 8 100 0.320 4,500 lbs. CT5034SP CT5010SP 10 100 0.360 4,500 lbs. CT5012SP 12 100 0.420 4,500 lbs. CT5036SP CT5014SP 14 100 0.466 4,500 lbs. CT5016SP 16 100 0.512 4,500 lbs. CT5042SP 18 20 22 24 26 28 30 32 34 36 42
D Size 3/4" 3/4" 3/4"
Wt. lbs. 1.45 1.88 3.35 5.51 7.29
OCM Part No.
1/2” Coil Tie Standard - Conefast
CT5018SP CT5020SP CT5022SP CT5024SP CT5026SP CT5028SP CT5030SP CT5032SP CT5034SP CT5036SP CT5042SP
OCM Part No. 50BW 75BW 100BW 125BW 150BW
*75F200FUBP(2"length)is full threaded.
OCM Part No. 75FNHH6P 75FNHH2HP
AC
t
Thread Size 1/2” 3/4” 1” 1 1/4” 1 1/2”
Wall Thickness 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 44
Tie Length 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 42
Box Qty
**Additional lengths available upon request **Waterseal available upon request -SWL provides a safety factor of apporoximately 2 to 1.
16
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Weight / pcs lbs 0.320 0.320 0.320 0.360 0.420 0.466 0.512 0.558 0.604 0.650 0.696 0.742 0.788 0.834 0.880 0.926 1.000 1.100
Safe Working Load lbs 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs.
Coil Thread Products www.ocm-inc.com
3/4” Coil Tie Standard - Conefast
Dia.
OCM Part No. CT7506SP CT7508SP CT7510SP CT7512SP CT7514SP CT7516SP CT7518SP CT7520SP CT7522SP CT7524SP
Tie Length 6 8 10 12 14 16 18 20 22 24
Wall Thickness 8 10 12 14 16 18 20 22 24 26
Safe Working Load lbs 6,750 lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs.
Weight / pcs lbs 0.750 0.750 0.900 0.980 0.980 1.140 1.140 1.320 1.390 1.480
Box Qty 100 100 100 100 100 100 100 100 100 100
**Additional lengths available upon request **Waterseal available upon request -SWL provides a safety factor of apporoximately 2 to 1.
Qty per Box OCM 25 Dia. OCM Part No. Dia. 25 Full Strut Coil Tie 1/2" Part No. SBCONE50X100P 1/2" SBCONE50X100P 25 SBCONE50X150P 1/2" SBCONE50X150P SBCONE50X200P 1/2" 25 SBCONE50X200P 1/2" SBCONE75X100P 3/4" 25 SBCONE75X100P SBCONE75X200P 3/4" SBCONE75X200P 3/4" S BCONE100X200P 1" 25 SSBCONE125X200P BCONE100X200Pngth " 11 1/4" e 25Tie L SBCONE125X200P 1 1/4" CT50WRENCH 1/2" Cone Wrench
Setback Conefast Plastic Cone
1/2" 1" Conefast Plastic Cone 1/2" 1 1/2" 1/2" 2" 3/4" 1" 3/4" 2" 1" 2" 1 1/4" 2" Cone Wrench 1/2" Cone Wrench 3/4" Cone Wrench
CT75WRENCH CT50WRENCH CT75WRENCH
Setback Setback 1" 1" 1 1/2" 1 2" 1/2" 2" 1" 1" 2" 22" " 2" 2" WATERSEAL TYPE 2"
WATER SWELLING RUBBER(AUS)
3/4" Cone Wrench 1/2" 3/4" Cone Wrench
Qty perQty Box per 25Box 25 25 25 25 25 25 25 25 25 25 25 25 25
To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity : 3. Tie Length : 4. Waterstop :
1/2” Coil Tie - Tie 1/2" Full Strut Coil Standard - Full Strut
Tie OCM Weight / pcs Safe Working Load Box Qty Full Tie 3/4" Part No.Strut LenghCoil th lbs lbs
CT5004SP-F OCM CT5006SP-F Part No. CT5008SP-F CT5004SP-F CT5010SP-F CT5006SP-F WATERSEAL TYPE CT5012SP-F CT5008SP-F CT5010SP-F To Order CT5014SP-F (Call, Fax or e-mail this form) CT5012SP-F CT5016SP-F 1. Part No. : CT5014SP-F 2. Quantity : CT5018SP-F 3. Tie Length : CT5016SP-F 4. Waterstop : CT5018SP-F CT5020SP-F Phone : 1-866-457-5710 CT5020SP-F : 1-847-541-9338 Fax CT5024SP-F e-mail : sales@ocm-inc.com CT5024SP-F CT5030SP-F CT5030SP-F Safe Working Load CT5036SP-F CT5036SP-F lbs CT5042SP-F 4,500 lbs. CT5042SP-F
4
Phone : 1-866-457-5710 : 1-847-541-9338 Fax e-mail : sales@ocm-inc.com
100
0.320
4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. 4,500 lbs. WATERSEAL TYPE 4,500 lbs. WATER SWELLING RUBBER(AUS) WATERSEAL TYPE 4,500 lbs. To Order WATER SWELLING RUBBER(AUS) (Call, Fax or e-mail this form) To Order4,500 lbs. (Call, Fax or e-mail this form) 1. Part No. 4,500 lbs.: 1. Part No. 2. : Quantity : 4,500 lbs. : 2. Quantity : Tie Length 3. 3. Tie Length : 4. Waterstop 4,500 lbs. : 4. Waterstop :
Tie Weight Working Load 6 100 / pcs Safe 0.320 Box Qty FullLenghth Strut Coil lbsTie 3/4" lbs 8 100 0.320
th
ng
e Ti
Le
WATER SWELLING RUBBER(AUS)
Full Strut Coil Tie 1/2" OCM Part No. CT5004SP-F CT5006SP-F CT5008SP-F CT5010SP-F CT5012SP-F CT5014SP-F CT5016SP-F CT5018SP-F CT5020SP-F CT5024SP-F CT5030SP-F CT5036SP-F CT5042SP-F
th
ng
e Ti
Le
Tie Weight / pcs Box Qty Lenghth lbs 4 100 0.320 6 100 0.320 8 100 0.320 10 100 0.360 WATERSEAL TYPE 12 100 0.420 14 WATER SWELLING 100 RUBBER(AUS) 0.466 To Order 16 100 0.512 (Call, Fax or e-mail this form) 18 100 0.558 1. Part 100 No. : 20 0.604 2. Quantity : 24 100 : 0.696 3. Tie Length 4. Waterstop 30 100 : 0.834 36 100 1.000 Phone : 1-866-457-5710 : 1-847-541-93381.100 Fax 100 42
3/4”Strut CoilCoil TieTie - 3/4" Full
Standard - Full Strut
OCM Part No. CT5004SP-F CT5006SP-F CT5008SP-F CT5010SP-F CT5012SP-F CT5014SP-F CT5016SP-F CT5018SP-F CT5020SP-F CT5024SP-F CT5030SP-F CT5036SP-F CT5042SP-F
Tie Lenghth 4 6 8 10 12 14 16 18 20 24 30 36 42
e-mail : sales@ocm-inc.com
4 100 10100 6 12 8 100 10 14100 h 12 gt 100 n16 14 Le 100 e 18 h i t 16 T 100 ng Le 18 20 e 100 Ti 20 24100 24 100 30100 30 36100 36 42 42100
-SWLCoil provides a safety factor3/4" of apporoximately 2 to 1. Full Strut Tie 100 0.320 4,500 lbs. th
ng
e Ti
CT7508SP-F
Le
WATERSEAL TYPE
0.320 0.320 0.360 0.420 0.466 0.512 0.558 0.604 0.696 0.834 Tie Lenghth 1.000 1.100 6 8
WATER SWELLING RUBBER(AUS) 4,500 lbs. To Order 4,500 lbs. (Call, Fax or e-mail this form) 4,500 lbs. 1. Part No. : 2. Quantity : 4,500 lbs. 3. Tie Length : 4,500 lbs. 4. Waterstop : 4,500 lbs. Phone : 1-866-457-5710 : 1-847-541-9338 Fax 4,500 lbs. e-mail : sales@ocm-inc.com WATERSEAL TYPE 4,500 lbs. WATER SWELLING RUBBER(AUS) 4,500 lbs. To Order Weight / pcs (Call, Safe 4,500 lbs. Fax Working or e-mail this Load form) Box Qty lbs 4,500 lbs. lbs 1. Part No. : 100 0.750 6,750 lbs. 2. Quantity : 4,500 lbs.
100
0.750
lbs. lbs. 6,750 lbs. Phone : 1-866-457-5710 6,750 lbs. : 1-847-541-9338 Fax e-mail : sales@ocm-inc.com 100 1.140 6,750 lbs. 100 1.230 6,750 lbs. 100 1.320 6,750 lbs. 100 1.480Safe Working 6,750Load lbs. Weight / pcs
**1/2" Heavy Duty (6,750 SWL) CT7510SP-F available upon request Available0.980 10 - 4 Strut 100 CT7512SP-F 12 100 0.980 **Additional lengths available upon request CT7514SP-F 14 100 1.070 **Waterseal available upon request CT7516SP-F 2 to 1. -SWL provides a safety factor of apporoximately CT7518SP-F CT7520SP-F OCM CT7524SP-F Tie
16 18 20 24
6,750 3. Tie Length : 4. Waterstop : 6,750
4,500 lbs.
0.360 4,500 lbs. 0.420 4,500 lbs. 4,500 lbs. 0.466 4,500 lbs. 0.512 4,500 lbs. 0.558 4,500 lbs. 4,500 lbs. 0.604 4,500 lbs. 0.696 4,500 lbs. 0.834 4,500 lbs. 1.000 4,500 lbs. 4,500 lbs. 1.100
4,500 lbs. **1/2" Heavy Duty (6,750 SWL) available upon request - 4 Strut Available 4,500 lbs. Phone : 1-866-457-5710 Phone : 1-866-457-5710 : 1-847-541-9338 Fax 4,500 lbs. **Additional lengths available upon request : 1-847-541-9338 Fax e-mail : sales@ocm-inc.com e-mail : sales@ocm-inc.com 4,500 lbs. **Waterseal available upon request 4,500 lbs. -SWL provides a safety factor of apporoximately 2 to 1. 4,500 lbs. 4,500 lbs. OCM Tie Weight / pcs Safe Working Load Box Qty 4,500 lbs. Part No. Lenghth lbs lbs Working Load OCM Tie Weight / pcs Safe 4,500 lbs. Box Qty CT7506SP-F 6 100 0.750lbs 6,750 lbs. lbs 4,500 lbs. Part No. Lenghth 4,500 lbs. CT7508SP-F 8 100 0.750 6,750 lbs. 610 100 0.750 6,750 lbs. 4,500 lbs.CT7506SP-F CT7510SP-F 100 0.980 6,750 lbs.
CT7512SP-F **1/2" Heavy Duty (6,750 SWL) available upon request - 4 Strut AvailableCT7508SP-F **Additional upon request CT7514SP-F CT7510SP-F Weightlengths / pcs available Safe Working Load Box Qty **Waterseal lbsavailable upon request lbs CT7516SP-F
100 100 100 100 100 100 100 ngth Le 100 e Ti 100 100OCM Part No. 100 CT7506SP-F 100
0.320
100 0.320 100 0.320 0.360 100 0.420 100 0.466 100 0.512 0.558 100 0.604 100 0.696 100 0.834 100 1.000 1.100 100
CT7512SP-F CT7518SP-F CT7514SP-F CT7520SP-F CT7516SP-F CT7524SP-F CT7518SP-F CT7520SP-F CT7524SP-F
812 1014 1216 18 1420 1624 18 20 24
100 100 100 100 100 100 100 100 100 100 100
0.750 0.980 1.070 0.980 1.140 0.980 1.230 1.070 1.320 1.140 1.480
100 100 100
1.230 1.320 1.480
**Additional lengths available upon request **Waterseal available upon request -SWL provides a safety factor of apporoximately 2 to 1.
17
**Additional lengths available upon request **Waterseal available upon request -SWL provides a safety factor of apporoximately 2 to 1.
6,750 6,750 lbs. 6,750 lbs. 6,750 6,750 lbs. 6,750 6,750 lbs. 6,750 6,750 lbs. 6,750 6,750 lbs.
lbs. lbs. lbs. lbs. lbs. 6,750 lbs. 6,750 lbs. 6,750 lbs.
Light Duty Forming Products www.ocm-inc.com
Combo Tie HD Loop Tie and 1/2" Coil Tie Snap Tie and 1/2" Coil Tie
OCM Part No. COMBO-50C/HDL-4 COMBO-50C/HDL-6 COMBO-50C/HDL-8
4 6 8
Weight per pcs lbs 0.25 0.27 0.29
Carton Qty 100 100 100
Safe Working Load lbf 3,000 3,000 3,000
6
0.30
100
2,250
Wall Size
Snap Tie COMBO-50C/LEST
SWL provides a safety factor of apporoximately 2 to 1.
Coil Loop Inserts
S
ES
OCM Part No. SCLI50X3P(G) SCLI50X4P(G) SCLI50X6P(G) SCLI75X4P(G) SCLI75X6P(G) SCLI75X9P(G) SCLI100X6P(G) SCLI100X8P(G)
L WA
H LT
N ICK
Dia. 1/2” 1/2” 1/2”ater W 3/4” 3/4” 3/4” 1” 1”
Length
ub
Sw
e
R 3” lling 4” 6” 4” 6” 9” 6” 8”
S) USafe Working Load
(A ber
lbs. 2,250 2,250 3,750 SS 2,250 NE 3,750 ICK H T LL 3,750 WA 3,750 3,750
SWL provides a safety factor of approximately 4 to 1. -Plain or galvanized available.
Snap Tie Snap Tie
Part No. Part No. Carton Safe Working Load Wall Size Short End Long End (in) Qty (lbs) ) 4-3/4" 8-1/4" US r (A e b b STSEC-6 STLEC-6 6 100 2,250 Ru lling we rS 2,250 STSEC-7 STLEC-7 7 100 a)te S W U r (A 2,250 STSEC-7.58 STLEC-7.58 7-5/8 100 bbe S) U Ru g A ( r ellin Sw bbe 2,250 STSEC-8 STLEC-8 8 100 ter Ru Wa lling ) e S w U 2,250 STSEC-9 STLEC-9 9 100 rS er (A ate ubb W R g ellin 2,250 STSEC-10 STLEC-10 10 100 Sw SS ter E a N W ICK TH 2,250 STSEC-11 STLEC-11 11 100 LL A W 2,250 STSEC-11.58 STLEC-11.58 11-5/8 100 S S 2,250 STSEC-12 CKNE STLEC-12 100 S) 12 U I A ( TH 2,250 STSEC-14 STLEC-14ubber 14 100 LL A W R 2,250 STSEC-15 STLEC-15 15 100 lling we S r ) teSTLEC-16 2,250 STSEC-16 16 100 US A Wa S ( S r e Cone 2,250 STSEC-18 STLEC-18 18KNE 100 ubb HIC R T LL 2,250 STSEC-20 STLEC-20 20 100welling WA rS te100 2,250 STSEC-24 STLEC-24 24 a W 2,250 STSEC-27 STLEC-27 27 100 2,250 STSEC-30 STLEC-30 30 100 Part No. Part No. Carton Safe Working Load Wall Size 2,250 STSEC-32 STLEC-32 32 100 Short End Long End (in) Qty (lbs) 4-3/4" 8-1/4" 2,250 STSEC-33 STLEC-33 33 100 STSEC-6 STLEC-6 6 100 2,250 2,250 STSEC-7 STLEC-7 7 100 2,250 STSEC-36 STLEC-36 36 100 2,250 STSEC-7.58 STLEC-7.58 7-5/8 100 2,250 STSEC-8 STLEC-8 8 100 2,250 39 100 STSEC-39 STLEC-39 2,250 STSEC-9 STLEC-9 9 100 2,250 STSEC-42 STLEC-42 42 100 2,250 STSEC-10 STLEC-10 10 100 2,250 STSEC-11 STLEC-11 11 100 2,250 STSEC-48 STLEC-48 48 100 2,250 STSEC-11.58 STLEC-11.58 11-5/8 100 2,250 STSEC-12 STLEC-12 12 100 2,250 STSEC-54 STLEC-54 54 100 2,250 STSEC-14 STLEC-14 14 100 2,250 STSEC-15 STLEC-15 15 100 2,250 STSEC-60 STLEC-60 60 100 2,250 STSEC-16 STLEC-16 16 100 2,250 STSEW-6 STLEW-6 6 100 Cone STSEC-18 2,250 STLEC-18 18 100 2,250 STSEC-20 STLEC-20 20 100 2,250 STSEW-7 STLEW-7 7 100 2,250 STSEC-24 STLEC-24 24 100 2,250 STSEC-27 STLEC-27 27 100 2,250 STSEW-8 STLEW-8 8 100 2,250 STSEC-30 STLEC-30 30 100 2,250 STSEC-32 STLEC-32 32 100 2,250 STSEW-9 STLEW-9 9 100 2,250 STSEC-33 STLEC-33 33 100 2,250 STSEW-10 STLEW-10 10 100 2,250 STSEC-36 STLEC-36 36 100 2,250 39 100 STSEC-39 STLEC-39 2,250 STSEW-12 STLEW-12 12 100 2,250 STSEC-42 STLEC-42 42 100 2,250 STSEC-48 STLEC-48 48 100 2,250 STSEW-14 STLEW-14 14 100 2,250 STSEC-54 STLEC-54 54 100 2,250 STSEC-60 STLEC-60 60 100 2,250 STSEW-15 STLEW-15 15 100 2,250 STSEW-6 STLEW-6 6 100 2,250 STSEW-16 STLEW-16 16 100 2,250 STSEW-7 STLEW-7 7 100 Washer 2,250 STSEW-8 STLEW-8 8 100 2,250 STSEW-18 STLEW-18 18 100 2,250 STSEW-9 STLEW-9 9 100 2,250 STSEW-10 STLEW-10 10 100 2,250 STSEW-20 STLEW-20 20 100 2,250 STSEW-12 STLEW-12 12 100 2,250 STSEW-14 STLEW-14 14 100 2,250 STSEW-24 STLEW-24 24 100 2,250 STSEW-15 STLEW-15 15 100 2,250 STSEW-30 STLEW-30 30 100 2,250 STSEW-16 STLEW-16 16 100 Washer 2,250 STSEW-18 STLEW-18 18 100 2,250 STSEW-36 STLEW-36 36 100 2,250 STSEW-20 STLEW-20 20 100 2,250 STSEW-24 STLEW-24 24 100 2,250 STSEW-42 STLEW-42 42 100 2,250 STSEW-30 STLEW-30 30 100 2,250 STSEW-36 STLEW-36 36 100 2,250 STSEW-48 STLEW-48 48 100 2,250 STSEW-42 STLEW-42 42 100 2,250 STSEW-54 STLEW-54 54 100 2,250 STSEW-48 STLEW-48 48 100 2,250 STSEW-54 STLEW-54 54 100 2,250 60 100 STSEW-60 STLEW-60 2,250 60 100 STSEW-60 STLEW-60 LL WA
SS
NE
ICK
TH
Snap Tie
-SWL provides a safety factor of apporoximately 2 to 1. -SWL provides a safety factor of apporoximately 2 to 1. -Special lengths and Stainless Steel also available. -Special lengths18and Stainless Steel also available.
ellin
t Wa
w er S
Light Duty Forming Products www.ocm-inc.com
Cring(25-UCR) Cring(25-UCR) for Snap Ties
86 86 U $ U $ EEH EEH 5LQXJ 5X J HOOLQ HOO 6Z 6Z WHU WHU :D :D
SS
NE
ICK
TH
Wa
lling
we
S ter
)
US
r (A
bbe
Ru
LL WA
SS
NE
ICK
TH
lling
we
S ter
Wa
For Use With Snap Ties, Standard Loop Ties
)
US
r (A
bbe
Ru
Box Quantity 100 pcs
-SWL provides a safety factor of apporoximately 2 to 1. -Special lengths and Stainless Steel also available.
6 6
$8 $8 HU HU XEE XEE J OO5LQJ 5 LQ OO H H 6Z 6Z WHU WHU :D :D
Snap Tie Heavy Duty
LL WA
Part No. 25-UCR
Part No. Short End 4-3/4" STSEC-6 HD STSEC-7 HD STSEC-7.58 HD STSEC-8 HD STSEC-9 HD STSEC-10 HD STSEC-11 HD STSEC-11.58 HD STSEC-12 HD Cone STSEC-14 HD STSEC-15 HD STSEC-16 HD STSEC-18 HD STSEC-20 HD STSEC-24 HD STSEC-30 HD STSEC-36 HD STSEC-42 HD STSEC-48 HD STSEW-6 HD STSEW-8 HD STSEW-9 HD STSEW-10 HD STSEW-12 HD STSEW-14 HD STSEW-15 HD Washer STSEW-16 HD STSEW-18 HD STSEW-20 HD STSEW-24 HD STSEW-30 HD STSEW-36 HD STSEW-42 HD STSEW-48 HD
Part No. Long End 8-1/4" STLEC-6 HD STLEC-7 HD STLEC-7.58 HD STLEC-8 HD STLEC-9 HD STLEC-10 HD STLEC-11.58 HD STLEC-12 HD STLEC-14 HD STLEC-15 HD STLEC-16 HD STLEC-18 HD STLEC-20 HD STLEC-24 HD STLEC-30 HD STLEC-36 HD STLEC-42 HD STLEC-48 HD STLEW-6 HD STLEW-8 HD STLEW-9 HD STLEW-10 HD STLEW-12 HD STLEW-14 HD STLEW-15 HD STLEW-16 HD STLEW-18 HD STLEW-20 HD STLEW-24 HD STLEW-30 HD STLEW-36 HD STLEW-42 HD STLEW-48 HD
Wall Size (in)
Carton Qty
6 7 7-5/8 8 9 10 11 11-5/8 12 14 15 16 18 20 24 30 36 42 48 6 8 9 10 12 14 15 16 18 20 24 30 36 42 48
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Safe Working Load (lbs)
3,250
3,250
-SWL provides a safety factor of apporoximately 2 to 1. -Special lengths and Stainless Steel also available.
Snap Tie Wedge Snap Tie Wedge
OCM Part No. STWEGP
Galvanized
A Clamp
A Clamp OCM Part No. STWEGP
OCM Part No. STWEGP
OCM Part No. OCM ACLMP
Part No. ACLMP
Carton Qty 100
Safe Working Load lbs 3,250
Weight per pcs lbs 0.40
Carton Qty 100
Weight per pcs lbs 0.40
Carton Qty Carton 50
Qty 50
Carton Qty 100
OCM Part No. ACLMP
Safe Working Load lbs 3,250
Weight per pcs lbs 1.40 Weight per pcs
lbs 1.40
19
Carton Qty 25
Weight per pcs lbs 0.40
Safe Working Load lbs 3,325
Weight per pcs lbs 1.40
Light Duty Forming Products www.ocm-inc.com C-Clamp
OCM Part No. CCLMP
C-Clamp
Snap TieExtender Extender Snap Tie OCM Part No. CCLMP
OCM Part No. CCLMP
Snap Bracket
Carton Qty 75
Carton Qty 75
OCM Part No.
Carton Qty 50
Jahn Scaffolding Bracket
OCM Part No. OCM-FLB
Carton Qty 25
2&0 3DUW 1R 67 67(
Weight per pcs lbs 1.1
Form Liner Clamp
OCM-SB
Weight per pcs lbs 1.1
Carton Qty 25
Box Qty 25
Weight per pcs lbs 1.2
OCM Part No. OCM-FLB
Box Qty 25
Weight per pcs lbs 1.3
Finish
1.2
Plated
A-90 Scaffold Bracket Jack
DoubleWaler Waler Bracket Double Bracket
&DUWRQ 4W\
OCM Part No. OCM-SB
Weight per pcs lbs
Weight per pcs lbs 1.3
Weigt per pcs lbs 1. 1
Finish Plated
Finish Galvanized
OCM Part No. SBRACT-JH
Weight per pcs lbs 16.5
OCM Part No. SBRACT-A90
Weight per pcs lbs 24.5
Finish Galvanized
2&0 3DUW 1R :% ; :% ;
20
6L]H [ [
&DUWRQ 4W\
:HLJKW SHU SFV OEV
Light Duty Forming Products www.ocm-inc.com Snap Tie Corner Lock
Snap Tie Corner Lock
OCM Part No. OCM-JCL
FORMING PRODUCTS Speed Lock Tie
OCM Part No.
FORMING PRODUCTS
1"x1" Self Centering Cone
SLT-06B SLT-07B SLT-08B SLT-09B ) US SLT-10B r (A bbe Ru g To Order in ) SLT-12B eSll U w (A S (Call, Fax or e-mail this form) rer autbeb W gR To Order SLT-14B ellin Sw (Call, Fax or e-mail this form) ter 1. Part No. : Wa 2. Quantity : SLT-16B 1. Part No. : 2. Quantity : 3. Wall Thickness : SLT-18B 3. Wall Thickness : 4. Waterstop : 4. Waterstop : SLT-20B Phone : 1-866-457-5710 Phone : 1-866-457-5710 Fax : 1-847-541-9338 SLT-22B Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com e-mail : sales@ocm-inc.com SLT-24B Weight per each Safe Working Load Wall Size lbs lbs Weight per each Safe Working Load SLT-30B 6"Wall Size 0.21 lbs lbs 7" 0.22 SLT-36B 8" 0.23 6" 0.21 9" 0.24 7" 0.22 10" 0.25 SLT-42B 8" 0.23 12" 0.28 14" 0.31 9" 0.24 2,250 SLT-48B 16" 0.34 10" 0.25
6” 7” 8” 9” 10” 12” 14” 16” 18” 20” 22” 24” 30” 36” 42” 48”
S
1"x1" Self Centering Cone L WA SS
NE
OCM Part No. OCM SLT-06 Part SLT-07No. SLT-08 SLT-06 SLT-09 SLT-07 SLT-10 SLT-08 SLT-12 SLT-14 SLT-09 SLT-16 SLT-10 SLT-18 SLT-12 SLT-20 SLT-22 SLT-14 SLT-24 SLT-16 SLT-30 SLT-18 SLT-36
ICK
TH
18" 20" 22" 24" 30" 36"
0.36
12" 0.28 0.38 0.41 14" 0.31 2,250 0.44 16" 0.34 Speed Lock 0.48 18" 0.36 0.53 Stiff Back SLT-20 20" 0.38 -SWL provides a safety factor of apporoximately 2 to 1. SLT-22 22" -Special lengths and Stainless Steel also available. 0.41 SLT-24 24" 0.44 SLT-30 30" 0.48 SLT-36 36" 0.53
Speed Lock Stiff Back
-SWL provides a safety factor of apporoximately 2 to 1. -Special lengths and Stainless Steel also available.
Weight Per Each lbs 0.21 0.22 0.23 0.24 0.25 0.28 0.31 0.34 0.36 0.38 0.41 0.44 0.48 0.53 0.62 0.71
Wall Size
S NE Speed LockL THTie ICK
LL WA
Weight per pcs lbs 1.78 Safe Working Load lbs 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250
-SWL provides a safety factory of approximately 2 to 1. -Special lengths and Stainless Steel also available.
OCM Part No.
Carton Qty
SLB-SB
Weight per pcs lbs
25
0.50
tekcarB kcoL deepS
Speed Lock Bracket daoL gnikro W efaS sbl 052.2
scp rep thgie W sbl 37.1
notraC yt Q 52
OCM Part No.
Carton Qty
Weight per pcs lbs
SLB
25
1.73
M CO .oN traP BLS
21
Safe Working Load lbs 2,250
Steel-Plywood Forms and Accessories www.ocm-inc.com
HANDSET CONCRETE FORMING SYSTEMS -Steel/Ply Wood Panels and Fillers
-Metal Fillers and Filler Angles
-Inside Corners, Outside Corners, Hinged Corners
-Form Ties, Wedge Bolts, Scaffold Brackets, Handset Accessories
OCM, Inc. 1215 Henri Drive Wauconda, IL, 60084 Phone: 866-457-5710 FAX: 847-462-4259 www.ocm-inc.com
www.ocm-inc.com 22
Steel-Plywood Forms and Accessories www.ocm-inc.com
Handset Concrete Forming Systems
www.ocm-inc.com (866)-457-5710
OCM Steel/Plywood Panels and Fillers
-Complete line of panel heights, filler widths, and all types of corners available to make ordering and maintaining your current fleet easier. -High quality powder coating increases durability, weatherability, and keeps forms looking good for years to come. -Comes standard with upgraded Fin Form solid Birch with 120/120 performance that provides uncommon strength with a smooth surface. It is easy to strip and will not leave grain imprinting. Fin Form is bonded with a phenolic resin adhesive which is water and boil proof. All edges are factory sawn and sealed with a special styrene acrylic sealer. Classic HDO with 100/30 is also available upon request and is the standard insert offered by our competition. -Side rails and cross members are made from high strength rolled steel that meets or exceeds the industry standard for Handset Forms of 55,000 psi minimum yield strength for the side rails and 60,000 psi minimum yield strength for cross members. -Cross members are standard 2” x 2” and are located every 12” making them ideal for residential /commercial foundations and rental yards. -Rivets are 1/4” heavy duty, solid machine installed made from 1100F aluminum to increase longevity. -Welds are quality controlled by highly trained craftsmen, and frames are manufactured to precise dimensions so they are easily compatible with other Handset Steel/Plywood form systems. -Dado slots located at 12” on center and wedge bolt accessory slots are located at 6” on center. -Conveniently located handles make set up, stripping and handling easier. -Maximum pour pressure of 1,000 lbs per square foot. -With proper care contractors can expect that forms will be able to be reused up to 200 times before plywood needs to be replaced. 8FT OCM Weight Part No. lbs 24" Panels SF96X24 75 22" Fillers SF96X22 70 20" Fillers SF96X20 66 18" Fillers SF96X18 63 16" Fillers SF96X16 59 14" Fillers SF96X14 54 12" Fillers SF96X12 50 46 10" Fillers SF96X10 8" Fillers SF96X8 42 6" Fillers SF96X6 39 5" Fillers SF96X5 37 4" Fillers SF96X4 34 Sizes
6FT OCM Weight Part No. lbs SF72X24 58 SF72X22 54 SF72X20 50 SF72X18 47 SF72X16 44 SF72X14 40 SF72X12 36 SF72X10 34 SF72X8 32 SF72X6 28 SF72X5 27 SF72X4 25
5FT OCM Weight Part No. lbs SF60X24 48 SF60X22 46 SF60X20 42 SF60X18 39 SF60X16 37 SF60X14 35 SF60X12 33 SF60X10 30 SF60X8 26 SF60X6 25 SF60X5 23 SF60X4 21
*9FT and 10FT available with HDO plywood upon request.
23
4FT OCM Weight Part No. lbs SF48X24 40 SF48X22 38 SF48X20 35 SF48X18 32 SF48X16 30 SF48X14 28 SF48X12 26 SF48X10 24 SF48X8 22 SF48X6 19 SF48X5 18 SF48X4 17
3FT OCM Weight Part No. lbs SF36X24 30 SF36X22 29 SF36X20 27 SF36X18 25 SF36X16 24 SF36X14 22 SF36X12 20 SF36X10 19 SF36X8 17 SF36X6 15 SF36X5 14 SF36X4 13
Steel-Plywood Forms and Accessories www.ocm-inc.com
Handset Concrete Forming Systems
OCM Inside Corners Description 4x4 Inside Corners 6x6 Inside Corners
www.ocm-inc.com (866)-457-5710
8FT 6FT 5FT 4FT 3FT OCM Weight OCM Weight OCM Weight OCM Weight OCM Weight Part No. lbs Part No. lbs Part No. lbs Part No. lbs Part No. lbs IC44-8F 42 IC44-6F 32 IC44-5F 28 IC44-4F 23 IC44-3F 18 IC66-8F 52 IC66-6F 40 IC66-5F 32 IC66-4F 26 IC66-3F 20
-Standard 4x4 or 6x6 Inside Corners are manufactured with reinforcing straps to maintain 90°. -Dadoes and slots are placed every 12" O.C. for tie and connection hardware. -Used to form 90° angle. -9FT. available upon request. 8FT 6FT 5FT 4FT 3FT OCM Weight OCM Weight OCM Weight OCM Weight OCM Weight Part No. lbs Part No. lbs Part No. lbs Part No. lbs Part No. lbs Inside 6x6 Hinge Corner IC66-8H 66 IC66-6H 49 IC66-5H 41 IC66-4H 34 IC66-3H 25 Description
-Inside Hinged Corners are used to form inside corners down to a 45° angle. -Typically used opposite of outside hinged corners. -9FT. available upon request. Description Inside Bay Corner
8FT 6FT 5FT 4FT 3FT OCM Weight OCM Weight OCM Weight OCM Weight OCM Weight Part No. lbs Part No. lbs Part No. lbs Part No. lbs Part No. lbs BCI96 34 BCI72 25 BCI60 20 BCI48 17 BCI36 13
-Inside Bay Corners have a 3"x3" face dimension. -Typically used opposite of an Outside Bay Corner to form a 135° angle. -9FT. available upon request.
OCM Outside Corners 8FT 6FT 5FT 4FT 3FT OCM Weight OCM Weight OCM Weight OCM Weight OCM Weight Part No. lbs Part No. lbs Part No. lbs Part No. lbs Part No. lbs Standard Outside Corners OC96F 25 OC72F 18 OC60F 14 OC48F 12 OC36F 9 Description
-Used to form 90° angle. -Dadoes and slots are placed every 12" O.C. for tie and connection hardware. -9FT. available upon request. Description Outside Hinge Corner
8FT 6FT 5FT 4FT 3FT OCM Weight OCM Weight OCM Weight OCM Weight OCM Weight Part No. lbs Part No. lbs Part No. lbs Part No. lbs Part No. lbs OC96H 20 OC72H 18 OC60H 16 OC48H 12 OC36H 8
-Used to form Outside Corners from 135° down to 5° angle. -Typically used opposite of Inside Hinged Corners. -9FT. available upon request. Description Outside Bay Corner
8FT 6FT 5FT 4FT 3FT OCM Weight OCM Weight OCM Weight OCM Weight OCM Weight Part No. lbs Part No. lbs Part No. lbs Part No. lbs Part No. lbs BCO96 60 BCO72 46 BCO60 36 BCO48 30 BCO36 23
-Outside Bay Corners have a 7"x7" face dimension. -Typically used opposite of Inside Bay Corners to form a 135° angle. -9FT. available upon request.
24
Steel-Plywood Forms and Accessories www.ocm-inc.com
Handset Concrete Forming Systems
www.ocm-inc.com (866)-457-5710
OCM Metal Fillers
8FT 6FT 5FT 4FT 3FT OCM Weight OCM Weight OCM Weight OCM Weight OCM Weight Part No. lbs Part No. lbs Part No. lbs Part No. lbs Part No. lbs 2" Metal Filler MF96X200 23 MF72X200 17 MF60X200 15 MF48X200 11 MF36X200 9 1-1/2" Metal Filler MF96X150 21 MF72X150 15 MF60X150 13 MF48X150 10 MF36X150 8 1" Metal Filler MF96X100 18 MF72X100 13 MF60X100 11 MF48X100 9 MF36X100 7 Description
-Metal Fillers are compatible with other handset steel/plywood forming systems. -Metal Fillers are made from cold formed u-shape sections and are available in 1", 1-1/2" and 2" width. -9FT. available upon request.
OCM Filler Angles
Description Filler Angle
8FT OCM Weight Part No. lbs FA96 11
6FT OCM Weight Part No. lbs FA72 8
5FT OCM Weight Part No. lbs FA60 7
4FT OCM Weight Part No. lbs FA48 5
3FT OCM Weight Part No. lbs FA36 4
-OCM Filler Angles are useful when forming around rebar, pipes or if there are other protrusions from the face of the wall. -Also used for changes in footing elevations while forming. -9FT. available upon request.
25
Steel-Plywood Forms and Accessories www.ocm-inc.com
FORMING PRODUCTS FORMING PRODUCTS OCM Part No.
X-Flat Tie X-Flat Tie
FT04SP FT06SP FT08SP 2. Size : 1. Part No. : FT09SP 3. Type : Standard / Heavy 2. Size : 4. Quantity : FT10SP 3. Type : Standard / Heavy : Phone4.: Quantity 1-866-457-5710 FT11SP Fax : 1-847-541-9338 : 1-866-457-5710 e-mailPhone : sales@ocm-inc.com FT12SP Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com FT13SP OCM Wall Thickness Safe Working Load FT14SP Type Part No. Size lbs OCM Wall Thickness Safe Working Load FT15SP FT06SP 6" Type Part No. Size lbs FT08SP 8" FT16SP FT06SP 6" FT09SP 9" FT08SP 8" FT17SP FT10SP 10" FT09SP 9" FT12SP 12" FT18SP FT10SP 10" FT14SP 14" FT12SP 12" FT19SP FT15SP 15" FT14SP 14" FT16SP 16" FT20SP FT15SP 15" FT18SP 18" FT16SP 16" FT20SP 20" FT21SP Standard 3,000 FT18SP 18" FT22SP 22" FT20SP 20" FT22SP FT24SP 24" Standard 3,000 FT22SP 22" FT30SP 30" FT23SP FT24SP 24" FT36SP 36" FT30SP 30" FT24SP FT42SP 42" FT36SP 36" FT48SP 48" FT26SP FT42SP 42" FT54SP 54" FT48SP 48" FT60SP 60" FT28SP FT54SP 54" FT66SP 66" FT60SP 60" FT30SP FT72SP 72" FT66SP 66" FT32SP SWL provides a safety factor of apporoximately 2 to 1. FT72SP 72" FT34SP SWL provides a safety factor of apporoximately 2 to 1. FT36SP FT38SP FT40SP FT42SP FT44SP FT46SP FT48SP FT54SP FT60SP FT66SP FT72SP FT78SP FT84SP
Wall Size 4” 6” 8” 9” 10” 11” 12” 13” 14” 15” 16” 17” 18” 19” 20” 21” 22” 23” 24” 26” 28” 30” 32” 34” 36” 38” 40” 42” 44” 46” 48” 54” 60” 66” 72” 78” 84”
To Order (Call, Fax or e-mail this form) To Order 1. Part(Call, No. :Fax or e-mail this form)
STCUDORP GNIMROF
Weight Per Each lbs 0.160 0.275 0.320 0.345 0.365 0.380 0.410 0.430 0.450 0.480 0.500 0.530 0.550 0.580 0.600 0.630 0.650 0.670 0.690 0.730 0.790 0.860 0.910 0.960 1.010 1.060 1.100 1.160 1.240 1.300 1.340 1.520 1.700 1.880 2.060 2.250 2.450
Safe Working Load lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs 3,000 lbs
SWL provides a safety factor of apporoximately 2 to 1.
redrO oT )mrof siht liam-e ro xaF ,llaC(
X-Flat Tie e - iT talF-X Heavy Duty
: .oN traP .1 eziS .2 : epyT .3 yvaeH / dradnatS : : ytitnauQ .4 0175-754-668-1 : enohP xaF 8339-145-748-1 : moc.cni-mco@selas : liam-e
d aoL gnikro W ef aS sb l
epyT
000,3
dradnatS
ss enkcihT ll a W e ziS "6 "8 "9 "01 "21 "41 "51 "61 "81 "02 "22 "42 "03 "63 "24 "84 "45 "06 "66 "27
MCO .oN tr aP PS60TF PS80TF PS90TF PS01TF PS21TF PS41TF PS51TF PS61TF PS81TF PS02TF PS22TF PS42TF PS03TF PS63TF PS24TF PS84TF PS45TF PS06TF PS66TF PS27TF
.1 ot 2 yletamixoroppa fo rotcaf ytefas a sedivorp LWS
OCM Part No.
Wall Size
Weight Per Each lbs
Safe Working Load lbs
FT06HD
6”
0.284
3,500
FT08HD
8”
0.330
3,500
FT10HD
10”
0.376
3,500
FT12HD
12”
0.423
3,500
FT14HD
14”
0.443
3,500
FT16HD
16”
0.515
3,500
FT18HD
18”
0.567
3,500
26
Loop Tie IZE
LS
L WA
Steel-Plywood Forms and Accessories /8"
2-1
ter Wa
Heavy Duty Loop Panel Tie /8"
2-1
Loop Tie IZE
LS
L WA
al
se ter
Wa
/8"
w rS
To Order (Call, Fax or e-mail this form)
)
US
(A
1. Part No. : 2. Quantity : 3. Standard or Heavy 4. Wall Thickness :
b
Ru
ing
ell
2-1
r be
te Wa
Heavy 2-1/8" Ends
OCM Part No. LTHD-06 LTHD-07 LTHD-08 LTHD-09 LTHD-10 LTHD-12 LTHD-14 LTHD-15 LTHD-16 LTHD-18 LTHD-19 LTHD-20 LTHD-24 LTHD-26 LTHD-28 LTHD-30 LTHD-32 LTHD-34 LTHD-36 LTHD-40 LTHD-42 LTHD-48 LTHD-54 LTHD-60
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Weight per pcs lbs 0.21 0.22 0.23 0.24 0.25 0.28 0.31 0.32 0.34 0.36 0.38 0.39 0.44 0.46 0.48 0.49 0.54 0.56 0.58 0.65 0.68 0.78 0.88 0.98
Wall Size 6" 7" 8" 9" 10" 12" 14" 15" 16" 18" 19" 20" 24" 26" 28" 30" 32" 34" 36" 40" 42" 48" 54" 60"
Carton Qty 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
al
rse
te Wa
Safe Working Load lbf 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000
Heavy 2-1/8" Ends
SWL provides a safety factor of apporoximately 2 to 1.
OCM Part No. LTHD-06 LTHD-07 LTHD-08 LTHD-09 LTHD-10 LTHD-12 LTHD-14 LTHD-15 LTHD-16 LTHD-18 LTHD-19 LTHD-20 LTHD-24 LTHD-26 LTHD-28 LTHD-30 LTHD-32 LTHD-34 LTHD-36 LTHD-40 LTHD-42 LTHD-48 LTHD-54 LTHD-60
Wall Size 6" 7" 8" 9" 10" 12" 14" 15" 16" 18" 19" 20" 24" 26" 28" 30" 32" 34" 36" 40" 42" 48" 54" 60"
er
U
(A
1. Part No. : 2. Quantity : 3. Standard or Heavy 4. Wall Thickness :
gR
in
ell
Sw
b ub
To Order (Call, Fax or e-mail this form)
S)
www.ocm-inc.com Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Weight per pcs lbs 0.21 0.22 0.23 0.24 0.25 0.28 0.31 0.32 0.34 0.36 0.38 0.39 0.44 0.46 0.48 0.49 0.54 0.56 0.58 0.65 0.68 0.78 0.88 0.98
Carton Qty 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Safe Working Load lbf 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000
SWL provides a safety factor of approximately 2 to 1. SWL provides a safety factor of apporoximately 2 to 1. -Additional lengths and specials available upon request. -Waterstop and Cones are available upon request.
Cring(25-UCR-H) for HD Loop Ties
ring(25-UCR-H)
86
E
XE
J 5
OOLQ
ZH
U 6
WH :D
$ HU
OOLQ
ZH
U 6
/8"
2-1
IZE
LS
L WA
al
rse
te Wa
/8"
2-1
r
OCM Part No. LTHD-06 LTHD-07 LTHD-08 LTHD-09 LTHD-10 LTHD-12 LTHD-14 LTHD-15 LTHD-16 LTHD-18 LTHD-19 LTHD-20 LTHD-24 LTHD-26 LTHD-28 LTHD-30 LTHD-32 LTHD-34 LTHD-36 LTHD-40 LTHD-42 LTHD-48 LTHD-54 LTHD-60
Heavy 2-1/8" Ends
Wall Size 6" 7" 8" 9" 10" 12" 14" 15" 16" 18" 19" 20" 24" 26" 28" 30" 32" 34" 36" 40" 42" 48" 54" 60"
g
llin
e Sw
b Ru
Weight per pcs lbs 0.21 0.22 0.23 0.24 0.25 0.28 0.31 0.32 0.34 0.36 0.38 0.39 0.44 0.46 0.48 0.49 0.54 0.56 0.58 0.65 0.68 0.78 0.88 0.98
SWL provides a safety factor of apporoximately 2 to 1.
)
US
r (A
be
te Wa
Base Tie Base Tie
Box Quantity 100 pcs
SWL provides a safety factor of apporoximately 2 to 1.
Heavy Duty Loop Panel Tie with Waterseal Loop Tie WH :D
For Use With Heavy Duty Loop Ties, Heavy Duty Snap Ties, Self Centering Loop Ties
86
U $
EH
XE
J 5
Part No. 25-UCR-H
OCM Part No. LTHD-08WS LTHD-10WS LTHD12-WS LTHD14-WS LTHD16-WS
To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity : 3. Standard or Heavy 4. Wall Thickness :
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Carton Qty 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Safe Working Load lbf 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000
Wall Size 8” 10” 12” 14” 16”
Weight Per Each lbs 0.24 0.25 0.29 0.31 0.35
Safe Working Load lbs 3,000 3,000 3,000 3,000 3,000
OCM Part No.
Wall Thickness Size
Type
Safe Working Load lbs.
BT-06
6”
Standard
3,000
BT-08
8”
Standard
3,000
BT-10
10”
Standard
3,000
BT-12
12”
Standard
3,000
BT-14
14”
Standard
3,000
BT-16
16”
Standard
3,000
BT-18
18”
Standard
3,000
BT-24
24”
Standard
3,000
SWL provides a safety factor of apporoximately 2 to 1.
27
Steel-Plywood Forms and Accessories www.ocm-inc.com
Wedge Bolt Wedge Bolt
Long Wedge Bolt Long Wedge Bolt
OCM Part No. OCMLW EGP
Bucket Qty 250
Weight per Bucket lbs 35
Short Wedge Bolt Bolt Short Wedge Bucket Qty 250
OCM Part No. OCMLW EGP
OCM Part No. OCMGWEGP
Bucket Qty 200
OCM Part No. OCMGWEGP
Turnbuckles M OOCCM rttNNoo.. PPaarDuty Heavy TBFB-FSF TBFB-FSF TBFB-BF TBFB-BF
Bucket Qty 500
Weight per Bucket lbs 60
OCM Part No. OCMLWEGP
Bucket Qty 250
Weight per Bucket lbs 35
Bucket Qty 250
Weight per Bucket lbs 25
Bucket Qty 200
Weight per Bucket lbs 60
OCM Part No. OCMSWBP Weight per Bucket lbs 35
OCM Part No. OCMGWBP
Gang Wedge Gang Wedge BoltBolt
Turnbuckle Turnbuckle
OCM Part No. OCMWEGP
Weight per Bucket lbs 60
Bucket Qty 200
OCM Part No.
Type
Weight per pcs lbs
Carton Qty
TBFB-FSF
Straight Plate
7.8
250
TBFB-BF
Bent Plate
8.1
250
OCM Part No.
Type
Wt. lbs.
Carton
TBFB-FSF-HD
Flat Straight Plate
11.000
250 Pieces
TBFB-BF-HD
Bent Plate
11.000
250 Pieces
Weight per Bucket lbs 60
Type Type StraightPlate Plate Straight BentPlate Plate Bent
Weeig ighhttppeerrppccss W lbss lb 7.8 7.8 8.1 8.1
Hand-Set Scaffolding Bracket
Hand-Set Scaffolding Bracket OCM Part No. SBRACT-HSET OCM Part No. SBRACT-HSET
OCM Part No. SBRACT-HSET
Weight per pcs lbs 13.9
Weight per pcs lbs 13.9
28
Weight per pcs lbs 13.9
Steel-Plywood Forms and Accessories www.ocm-inc.com
One Piece Waler Clamp OCM Part No. OCM-OPWC
One Piece Waler Clamp Heavy Duty
OCM Part No. OCM-OPWC-HD
Carton Qty 25
Weight per pcs lbs 1.15
Carton Qty 25
Weight per pcs lbs 1.30
FORMING PRODUCTS
Z Tie Holder
Z Tie Holder
OCM Part No. ZTIE
Carton Qty 25
S-Wedge Carton Qty 50
OCM Part No. ZTIE
Weight per pcs lbs 0.74
J-Strongback J-Strongback Hook Hook
OCM Part No. ZTIE OCM Part No. JSBH6P JSBH8P
Ply-Lag
Weight per pcs lbs 0.74
OCM Part No. JSBH-2424 JSBH-2624 Weight per pcs lbs JSBH-2626
Carton Qty 50
0.74
Weight per pcs lbs 1.5 1.3
OCM Part No. PL50-5.75 PL50-6.25 Weight per pcs lbsPL50-6.75 1.5PL50-7.25 1.3 PL50-8.75 PL50-9.75 PL50-10.75 PL50-12.75 PL50-14.75
OCM Part No. JSBH6P JSBH8P
Size D 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
Size 2 X4 - 2 X4 2 X6 - 2 X4 2 X6 - 2 X6 Length L 3" 3 1/2" 4" 4 1/2 " 6" 7" 8" 10" 12"
Qty per Box To Order 25 (Call, Fax or 25 e-mail this form)
25 1. Part No. : 2. Quantity Overall Length Safe :Working Load in 3. Lumber Sizelbs : 5 3/4" 6 1/4" Phone 6 3/4" Fax 7 1/4" 8 3/4" e-mail 9 3/4" 10 3/4" 12 3/4" 14 3/4"
: : :
3,000 3,000 1-866-457-5710 3,000 1-847-541-9338 3,000 3,000 sales@ocm-inc.com 3,000 3,000 3,000 3,000
Gang Waler Plate
Gang Waler Plate
2&0 3DUW 1R 2&0*: 3
FORMING PRODUCTS FORMING PRODUCTS S-Wedge S-Wedge
OCM Part No. OCM-SWEDGE
To Order (Call, Fax or e-mail this form) 1. Part No. : To Order 2. Quantity : (Call, Fax or e-mail this form) 3. Lumber Size :
1. Part No. : Phone : 1-866-457-5710 2. Quantity : Fax : 1-847-541-9338 3. Lumber Size :: sales@ocm-inc.com e-mail Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
29
&DUWRQ 4W\
Carton Qty 100
Steel-Plywood Forms and Accessories www.ocm-inc.com
Waler Tie OCM Part No. WT-2X4 WT-2X6
Carton Qty 100 100
OCM Part No. SBT2X4-2X4 SBT2X6-2X4 SBT2X6-2X6
Carton Qty 100 100 100
Waler Tie Strongback Tie
Strongback Tie
Carton Qty 100 100
OCM Part No.
Pipe Braces OCMW LTIE4OCMW LTIE6 Adjustable
Pipe Braces Fixed
Description Adjustable Pipe Brace - Standard Brace Length 7’-6”(Min.) To 14’-0”(Max) Adjustable Pipe Brace - Heavy Duty Brace Length 14’-0”(Min.) To 23’-6”(Max) Adjustable Pipe Brace - Long Heavy Duty Brace Length 22’-6”(Min.) To 39’-0”(Max)
OCM Part No.
Wt. lbs.
SWL MAX w/o Knee Bracing
PB-01
95.000
6,500/2,000
PB-04
130.000
6,500/1,950
PB-05
208.000
6,500/Not Recommended
Description Fixed Pipe Brace - Brace Length 21’-3”(Min.) To 22’-9”(Max) Fixed Pipe Brace W/ 5Ft Extension - Brace Length 26’-3”(Min.) To 27’-9”(Max) Fixed Pipe Brace W/ 10Ft Extension - Brace Length 31’-3”(Min.) To 32’-9”(Max) Fixed Pipe Brace - Brace Length 16’-6”(Min.) To 17’-6”(Max) Fixed Pipe Brace; 5 Ft Extension Only - Brace Length 5’-0”(Min.) To N/A(Max) Fixed Pipe Brace; 10 Ft Extension Only - Brace Length 10’-0”(Min.) To N/A(Max) Fixed Pipe Brace Extension Coupler - Brace Length 4’-0”(Min.) To N/A(Max)
Metal Form Patches
Aluminum Form Tie
OCM Part No. PB-08 PB-09 PB-10 PB-17 PB-EXT5 -F PB-EXT10-F PB-EC
Wt. lbs. 136.000 188.000 224.000 105.000 23.000 46.000 42.000
SWL MAX 6,500 4,800 3,600 6,500 N/A N/A N/A
Weight OCM Qty Size Part No. lbs per Box MFP-1.75 1-3/4" 0.038 1,000 MFP-2.25 2-1/4" 0.041 MFP-2.75 2-3/4" 0.043 *For covering holes and defects in form plywood for a smooth finish. *Sharp spikes make them easy to nail to plywood.
Wall Thickness Size AFT06FRETQN 6” AFT08FRETQN 8” AFT09FRETQN 9” AFT10FRETQN 10” AFT12FRETQN 12” AFT14FRETQN 14” AFT16FRETQN 16” AFT18FRETQN 18” AFT20FRETQN 20” AFT22FRETQN 22” AFT24FRETQN 24” AFT06NRETQN 6” AFT08NRETQN 8” AFT10NRETQN 10” AFT12NRETQN 12” AFT14NRETQN 14” AFT16NRETQN 16” AFT18NRETQN 18” AFT20NRETQN 20” AFT22NRETQN 22” AFT24NRETQN 24” AFT0810NRETQN 8”-10” Combo Part#
30
Type
End
Full Full Full Full Full Full Full Full Full Full Full Nominal Nominal Nominal Nominal Nominal Nominal Nominal Nominal Nominal Nominal Nominal
Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round
Safe Working Load lbs. 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600
SWL provides a safety factor of apporoximately 2 to 1. † For use with snap-on waler bracket only.
FORMING PRODUCTS
To Order (Call, Fax or e-mail this form)
Aluminum Form Accessories
Light Duty Forming Products 1. Part No. : 2. Quantitywww.ocm-inc.com : 90 Degree Angle Clip Aluminum Form Pin
3. Lumber Size :
Aluminum Form Pin )ODW +HDG
Aluminum Pin Aluminum Form Form Pin )ODW +HDG
OCM Part No.
Type
Dia
AFP-FH
Flat Head
5/8”
AFP-RH
Round Head
AFP-CP
Combo Pin
FORMING PRODUCTS
5RXQG +HDG )ODW +HDG
5RXQG +HDG
&RPER 3LQ 5RXQG +HDG
&RPER 3LQ
Phone : 1-866-457-5710 Bucket FaxLength : 1-847-541-9338 Qty e-mail : sales@ocm-inc.com 2-1/4”
250
5/8”
2-3/4”
250
5/8”
4-3/4”
250
Aluminum Form Accessories
Aluminum Form Wedge
Aluminum Form Wedge &RPER 3LQ
OCM PartOCM No. Part No. AFP-90CLIP AFT-SW
Weight per pcs lbs Type 0.17 Flat
90 Degree Angle Clip FORMING PRODUCTS Aluminum Form Clip Aluminum Form Waler Bracket FORMING PRODUCTS AFT-CW
OCM Part No. AFTWF AFTWC
Type
Bucket Qty
W eight per pcs lbs
Flat Curved
250
0.26
Bucket Qty
Curved
45
Silver Bullet Base Pin
250 250
P
F F
P P
0.26
90
OCM Part No. FORMING PRODUCTS AFT-SBP Aluminum Form Angle Pin OCM Weight per pcs ORMING RODUCTS Part No. lbs Aluminum Form Angle Pin AFP-90CLIP 0.17 OCM Part No. ORMING RODUCTS OCM Weight per pcs Aluminum Form Accessories AFP-45 Part No. lbs ORMING RODUCTS 90 Degree Angle Clip AFP-90 45 90 Accessories Aluminum Form AFP-CC 0.08 Cap/Filler Bracket
F
Qty Weight per pcs per Box lbs 100 0.26
Carton Qty To Order 500 Qty (Call, Fax or e-mail this per Box 1. Part No. : 100 : Carton 2. Size 3. Quantity : Qty Qty 50 per BoxPhone : 1-866-457-571 100 100 Fax : 1-847-541-933
Aluminum Form Accessories 90 Degree Angle Clip
Aluminum Form Clip
FORMING PRODUCTS 90 Degree Angle Clip
Aluminum Form Accessories 90 Degree Angle 90 Degree Angle Clip Clip OCM Part No.
Carton Qty
OCM Part No. AFP-90CLIP
e-mail : sales@ocm-in
Weight per pcs lbs 0.17
Qty per Box 100
Aluminum Form Brickledge Bracket
OCMAFP-45 Weight per pcs 50 Qty Part No. lbs per Box AFP-90 100 45 90 AFP-90CLIP 0.17 100 OCM Weight per pcs Qty Part No. lbs per Box AFP-90CLIP 0.17 100 OCM Weight per pcs Qty Part No. lbs per Box AFP-90CLIP 0.17 100 OCM Carton Part No. Qty AFP-45 50 AFP-90 100 OCM Weight per pcs Qty Part No. lbs per Box AFP-CC 0.08 100 OCM Weight per pcs Qty Part No. lbs per Box AFP-CC 0.08 100 OCM Weight per pcs Qty Part No. lbs per Box AFP-CC 0.08 100
Aluminum Form Clip
Aluminum Form Clip Aluminum Form Cap Clip Aluminum Form Clip
OCM Weight per pcs Aluminum Form Clip Part No. lbs AFP-CC
Aluminum Form Aluminum Form Brickledge Bracket OCM Brickledge Part No. Aluminum Form Brickledge Bracket Bracket AFP-BLB ORMING RODUCTS
0.08
Qty per Box 100
Weight per pcs
Qty
0.46
100
Aluminum Form Brickledge lbs per Box Bracket
FAluminum PForm Brickledge Bracket OCM Part No.
Weight per pcs lbs
Qty per Box
Aluminum Waler Brackets AFP-BLBForm0.46 100 OCM Weight per pcs OCM Weight per pcs Qty Part No. lbs per Box OCM Part No. lbs AFP-BLB 0.46 100 OCM Weight per pcs Qty Part No. AFP-CC 0.08 Part No. lbs per Box AFP-BLB 0.46 100 AFP-2X4 OCMAFP-2X6 Weight per pcs To Order (Call, Fax or e-mail this form)
1. Part No. : 2. Size : 3. Quantity :
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Qty Carton per Box Qty 100 1 1 Qty
Aluminum Form Brickledge Bracke Part No. lbs per Box AFP-BLB31
0.46
100
Light Duty Forming Products www.ocm-inc.com
Aluminum Form Form Styles 8/8-8/24 – Hole pattern 6-12 – Hole Pattern with Wide Bracing Commercial 24” wide • • • • • • • • • • • •
- Width 1” to 36” - Height 1’ to 9’ - Inset Face Sheets .125 Thickness - Closed Serrated Tube Bracing - Extruded Side Rails - Corner Gussetts - 3/8” Thick End Bar - Weld Wire (4043) - Flat Steel Bushings - Ring Bushings - Attached Hardware is also available. - Custom Forms are available.
Benefits of OCM’s Systems • • • • • • •
Cost Effective (Up to 2000 Pours) Unskilled Labor Rapid Setting Time (One House Per Day) Light Weight Training Provided by OCM Staff Versatility of Forming System Low Maintenance
All of these benefits are key ingredients in producing wall forms that are unparalleled within the industry. OCM Inc.’s expert craftsmen work with only the highest grade aluminum (6061 T6) raw material to produce structurally sound wall panels and fillers designed to take the rigors of today’s fast pace residential and commercial foundation companies. OCM’s forms are manufactured using .125" thick fully hardened aluminum face sheets with heavy duty extruded aluminum inset side rails for added protection from separation along weld lines. This provides maximum penetration of the weld and also reduces damage to the face sheet.
OCM’s form bracing come with several different designs depending on the hole patterns. The 8/168-24 comes standard with a fully enclosed serrated tube measuring 1’ x 2” and welded completely to the side rails to prevent concrete seepage. The 612 bracing come in a fully enclosed rectangular tube measuring 1½’ x 3½”. This pattern will give every panel and filler the support needed for today’s jobsite. Each side rail is fabricated to precise specifications, milled to the proper depth to support any wall tie manufactured. OCM Inc. manufactures a flat steel bushing for use on our side rails. Each bushing is attached using two solid steel rivets. Each bushing protects the form at the point of contact from damage through constant use of the pin and wedge attachments. Finally, OCM Inc. attaches .125” thick corner gussets to all four corners of each panel and filler for added strength.
OCM Informatio n 32 1215 Henri Drive, Wauconda, IL 60084 Phone: 866-457-5710 Fax: 847-462-4259
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Pencil Rod Light Duty Forming FORMING PRODUCTSProducts
To Order www.ocm-inc.com (Call, Fax or e-mail this form)
Resi-Ply Form Tie
Resi-Ply Form Tie
OCM Part No. To Order RT-6S (Call, Fax or e-mail this form) RT-6B 1. Part No. : RT-8S : 2. Size RT-8B 3. Quantity : RT-10S Phone : 1-866-457-5710 Fax : 1-847-541-9338 RT-10B e-mail : sales@ocm-inc.com RT-12S RT-12B RT-14S RT-14B
Carton Qty 250 250 250 250 250 250 250 250 100 100
F ORMING PRODUCTS FORMING PRODUCTS PencilPRod Clamp FORMING RODUCTS Pencil Rod Clamp
Pencil FORMING PRODUCTS FORMING PRODUCTS
Carton Weight per pcs OCM Qty To Order lbs (Call, Fax or e-mail this form) Part 250 0.176 No. To Order 1. Part No. : 250 0.176 (Call, Fax or e-mail this form) PR25-10 2. Size : 250 3. Quantity : 0.204 1. Part No. : 250 0.204 PR25-20 2. Size Phone : : 1-866-457-5710 3. QuantityFax : : 1-847-541-9338 250 0.232 e-mail : sales@ocm-inc.com Phone : 1-866-457-5710 250 0.232 Fax : 1-847-541-9338 250 0.264 e-mail : sales@ocm-inc.com 250 0.264 OCM0.300 100 Part No. 100 0.300
Part No. RT-6S RT-6B RT-8S RT-8B RT-10S RT-10B RT-12S RT-12B Rod RT-14S RT-14B OCM Part No. OCM PR25-10 Part No.PR25-20
Bundle
FORMING PRODUCTS
Bundle
PR25-10 FORMING PRODUCTS
50 50
PencilPencil RodRodClamp Clamp
To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Size : 3. Quantity :
PRC375
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
FORMING PRODUCTS FORMING PRODUCTS Pencil Rod Puller
Pencil Rod Puller OCM Part No. PRC25 PRC375
Size 1/4" 3/8"
SWL provides a safety factor of apporoximately 2 to 1.
1. Part No. : 2. Size : 3. Quantity :
SWL provides a safety factor of apporoximately 2 to 1.
OCM Part No. To Order 25PRP (Call, Fax or e-mail this form) 375PRP 1. Part No. :
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Size
3/8" Metal Keyway
Safe Working 2. Size Load : lbs 3. Quantity : 1,125 Phone : 1-866-457-5710 2,250 OCM
Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Part No.
SWL provides a safety factor of apporoximately 2 to 1. OCM Part No. 25PRP 375PRP
OCM Part No. 25PRP 375PRP
2,250
SWL provides a safety factor of apporoximately 2 to 1.
Safe Working Load lbs 1,125 2,250 To Order (Call, Fax or e-mail this form)
Metal Keyway 1/4"
3/8"
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
1. Part No. : 2. Size : 3. Quantity :
OCM Part No. PRC25 PRC375
Size 1/4" 3/8" 1/4"
Safe Working Load lbs Load Safe Working 1,125 lbs 2,250 1,125
Size
To Order (Call, Fax or e-mail this form)
0.204 0.232 0.232 0.264 0.264 To Order 0.300 (Call, Fax or e-mail this form) To Order 0.300
Phone : 1-866-457-5710 Fax Feet : 1-847-541-9338 Per Roll e-mail : sales@ocm-inc.com Apprx. 600
Weight per Roll lbs 100
OCM Part No. OCM PRC25 Part No. PRC375 PRC25
50 50
PR25-20
PR25-ROLL
0.176
Phone : 1-866-457-5710 0.176 Fax : 1-847-541-9338 e-mail0.204 : sales@ocm-inc.com
(Call, Fax or e-mail this form) 1. Part No. : 2. 1. Size Part No. :: 3. Quantity :: To Order Bundle2. Size (Call, Fax or e-mail this form) 3. Quantity : Phone : 1-866-457-5710 50 Fax : 1-847-541-9338 1. Part No.Phone : : 1-866-457-5710 e-mail : sales@ocm-inc.com 50 2. Size Fax : : 1-847-541-9338 3. Quantity : e-mail : sales@ocm-inc.com
*Bent or Straight available.
Pencil Rod OCM Pencil Rod
Pencil Roll
Rod Puller
1. Part No. : 2. Size per : pcs Weight 3. Quantity lbs :
Size
Carton
1/4" 3/8"
15 10
Size
Length
Gauge
Qty
Size
Carton
MK350-10
4 1/2” for 5” Slab
10’
24 Ga
10/bundle; 25/skid
1/4" 3/8"
15 10
MK450-10
4 1/2” for 5” Slab
10’
24 Ga
10/bundle; 25/skid
MK550-10
5 1/2” for 6” Slab
10’
24 Ga
10/bundle; 25/skid
MK750-10
7 1/2” for 8” Slab
10’
24 Ga
10/bundle; 25/skid
MK950-10
9 1/2” for 8” Slab
10’
24 Ga
10/bundle; 25/skid
Size
Carton
1/4" 3/8"
15 10
33
www.ocm-inc.com
Light Duty Forming Products FORMING PRODUCTS
Stake Puller
Metal Keyway Stakes Metal Keyway Stakes
OCM Part No. MKS-12 MKS-15 MKS-18 MKS-24
Length
Gauge
12" 15" 18" 24"
Qty
13 Ga 13 Ga 13 Ga 13 Ga
100 100 100 100
To Order (Call, Fax or e-mail this form)
Steel Stakes Round with Holes
FORMING PRODUCTS
OCM Part No. SS7512-RH SS7518-RH SS7524-RH SS7530-RH SS7536-RH SS7542-RH SS7548-RH SS87X18-RH SS87X24-RH SS87X30-RH SS87X36-RH SS87X42-RH SS87X48-RH
1. Part No. : 2. Quantity : Length 3. Wall Thickness :Qty per Box Available 4. Plywood : 12" 10
Diameter 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8"
18" 24"Phone 30"Fax 36" e-mail 42" 48" 18" 24" 30" 36" 42" 48"
10 10 : 1-866-457-5710 10 : 1-847-541-9338 10 : sales@ocm-inc.com 10 10 10 10 10 10 10 10
Solid Form Pins available upon request. Cold rolled, machined point premium stakes are available in stock.
Stake Puller
Stake Puller
To Order (Call, Fax or e-mail this form)
OCM Part No. SS-PULLER
1. Part No. : 2. Quantity : 3. Wall Thickness : 4. Plywood :
Wt. Lbs
Carton
12.000
1
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
DowelCap Cap Dowel OCM Part No. SS-PULLER
Plastic Dowel Cap Plastic Dowel Cap (White/Clear Color)
Wt. Lbs 12.000
OCM Part No. Carton MDC050-5 1 MDC075-5 MDC100-5 MDC125-5 MDC150-6
OCM Part No. PDC050-4 PDC62-4 PDC075-4 PDC100-4 PDC125-4 PDC/CW050-4 PDC/CW075-4
34
Size 1/2" X 5" 3/4" X 5" 1" X 5" 1 1/4" X 5" 1 1/2" X 6"
Size 1/2" X 4" 5/8" X 4" 3/4" X 4" 1" X 4" 1/2" X 4" Clear/ White 3/4" X 4" Clear/ White
Qty per Box 100 100 100 100 100
Qty per Box 1,000 1,000 800 500 500 1,000 800
Light Duty Forming Products www.ocm-inc.com
Smooth Dowel
Smooth Dowel - 1/2” X 12 Smooth Dowel - 1/2” X 18 Smooth Dowel - 1/2” X 24 Smooth Dowel - 3/4” X 18 Smooth Dowel - 3/4” X 24 Smooth Dowel 1’’ X 18’’ Smooth Dowel 1” X 24 Smooth Dowel - 1-1/4” X 18
Spreader Cleats
Wt. lbs. 0.668 1 1.34 2.26 3.01 4 5.34 6.7
Bundle Qty. 10 10 10 10 10 10 10 10
*Epoxy coated dowels available upon request.
Spreader Cleats WALL THICKNESS
OCM Part No. SD50X12 SD50X18 SD50X24 SD75X18 SD75X24 SD100X18 SD100X24 SD125X18
Description
OCM Part No. SC06-75 SC08-75 SC10-75 SC12-75 SC0562-118 SC06-118 SC0762-118 SC08-118 SC09-118 SC10-118 Safe Working Load SC1162-118 lbs 7 50 SC12-118
End Size 3/4” 3/4” 3/4” 3/4” 1 1/8” 1 1/8” 1 1/8” 1 1/8” 1 1/8” 1 1/8” 1 1/8” 1 1/8”
Wall Thickness 6’ 8” 10” 12” 5 5/8” 6” 7 7/8” 8” 9” 10” 11 5/8” 12”
Weight Per Pc 0.36 0.43 0.48 0.53 0.39 0.41 0.45 0.47 0.49 0.52 0.55 0.57
FORMING PRODUCTS
PLYWOOD
Box Quantity 100 100 100 100 100 100 100 100 100 100 100 100
Safe Working Load 750 750 750 750 750 750 750 750 750 750 750 750
Stacking Tie Wedge(Snapie Tie Wed OCM Part No. SPCLT SWL provides a safety factor of apporoximately 2 to 1.
SWL provides a safety factor of approximately 2 to 1.
Monolithic Pouring Straps
OCM Part No. SCMPS-15 SCMPS-17 SCMPS-19 SCMPS-23 SCMPS-27
FORMING PRODUCTS
15" 17" 19" 23" 27"
Stacking Tie(Snapie Tie) Stacking Tie (Snapie Tie)
OCM Part No. ST0562-118 ToST06-118 Order (Call, Fax or e-mail this form) ST0762-118 1. Part No. : ST08-118 2. Quantity : ST09-118 Phone : 1-866-457-5710 ST10-118 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com ST1162-118 ST12-118
FORMING PRODUCTS Stacking TieTie Wedge Stacking Wedge(Snapie Tie Wed OCM Part No. (Snapie Tie Wedge) OCM Part No.
To Order Carton Qty Weight per pcs lbs STW-STACKING (Call, Fax or e-mail this form)
ST08-118 ST10-118 ST12-118
100 100 100
1. Part No. : 2. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No.
Carton Qty
Weight per pcs lbs
STW-STACKING
50
0.350
Box Qty 50 50 50 50 50
Length
0.340 0.400 0.460
35
Wall Thickness 5 5/8” 6” 7 5/8” 8” 9” 10” 11 5/8” 12”
Weight Per Pc 0.280 0.300 0.320 0.340 0.370 0.400 0.440 0.460
Weight per pcs To Order (Call, Fax orlbs e-mail this form) 0.48 1. Part No. 0.55 : 0.62 2. Quantity : 0.75 0.88
Phone : 1-866-457-5710 Fax : 1-847-541-9338 Box e-mail : sales@ocm-inc.com Quantity 100 100 100 100 100 100 100 100
Carton Qty
Weight per pcs lbs
50
0.350
Light Duty Forming Products www.ocm-inc.com
Screed Pads & Posts
Screed Hooks
Footing Ties
Anchor Bolt '
/
OCM Part No. SCRPADS SCRP08 SCRP10 SCRP12 SCRP16 SCRP18 SCRP24 SCRP30 SCRP36
3" DIAM 1/2” NC THREAD
Bundle Qty 100
Weight per pcs lbs 0.160
8" 10" 12" 16" 18" 24" 30" 36"
10 10 10 10 10 10 10 10
1.000 1.250 1.500 2.000 2.250 3.000 3.750 4.500
Length
OCM Part No.
Description
Weight lbs
Box Qty
SCRHOOK-LONG SCRHOOK-SQLONG SCRHOOK-SHORT SCRHOOK-DR SCRHOOK-DSHORT
2” x 4” Screed Hook for Round Stake 2” x 4” Screed Hook for Square Stake 1/2” x 2” Screed Hook for Round Stake 2” x 4” Double Screed Hook for Round Stake 1/2” x 2” Screed Hook for Round Stake
0.54 0.54 0.54 1.40 0.54
100 100 100 50 50
OCM Part No. FOOT06 FOOT08 FOOT10 FOOT12 FOOT14 FOOT16 FOOT18 FOOT20 FOOT24 FOOT30 FOOT36 FOOT48
Bundle Qty 100 100 100 100 100 100 100 100 100 100 100 100
Length 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 48"
OCM Part No. AB508P AB5010P AB5012P AB506HDG AB508HDG AB5010HDG AB5012HDG AB5014HDG AB5016HDG AB5018HDG AB6208P AB6210P AB6212P AB6208HDG AB6210HDG AB6212HDG AB6218HDG AB7518P AB7512HDG AB7516HDG AB7524HDG 62RC3318FWHDG 62RC33316FWHDG 62RC22316FWHDG
Size D
Plating
1/2"
Plain
1/2"
Hot Dip Galv.
5/8"
Plain
5/8"
Hot Dip Galv.
3/4"
Plain
3/4"
Hot Dip Galv.
For 5/8" Hole
Flat Washer
-Plain or HDG per ASTM A307 -Rolled Thread
36
Length L 8" 10" 12" 6" 8" 10" 12" 14" 16" 18' 8" 10" 12" 8" 10" 12" 18" 18" 12" 16" 24" 3" x 3" x 1/8" 3" x 3" x 3/16" 2" x 2" x 3/16"
Weight per pcs lbs 0.300 0.383 0.483 0.550 0.617 0.633 0.700 0.800 0.850 0.967 1.133 1.567 Weight per pcs lbs 0.46 0.54 0.63 0.38 0.46 0.54 0.63 0.68 0.74 0.86 0.72 0.84 1.20 0.74 0.86 1.22 1.42 2.20 1.62 2.40 2.84
Light Duty Forming Products www.ocm-inc.com
Flat Washer for Anchor Bolt
FORMING PRODUCTS OCM Part No.
Size D
Length L
Finish
Box Qty.
Weight Per Pc lbs
62RC3318FWHDG
5/8”
3” x 3” x 1/8” Thick Flat Washer HDG for 5/8” Hole
HDG
50
0.450
62RC33316FWHDG
5/8”
3” x 3” x 3/16” Thick Flat Washer HDG for 5/8” Hole
HDG
50
0.550
62RC22316FWHDG
5/8”
2” X 2” X 3/16” Thick Flat Washer HDG for 5/8” Hole
HDG
50
0.350
T-Posts Anchor Bolts Nuts
OCM Part No.
Anchor Bolt Nut 1/2” Galvanized
ABN50G
0
50
ABN50P
1. Part No. : 0 2. Quantity :
50
Anchor Bolt Nut 1/2” Plain
FORMING P RODUCTS FORMING PRODUCTS FPunched ORMING PRODUCTS Hole Strapping Rebar Mushroom Cap
Anchor Bolts Washers
Wt.To Order Box lbs.(Call, Fax or e-mail Qty. this form)
Description
Anchor Bolt Nut 3/4” Galvanized
ABN75G
Anchor Bolt Nut 3/4” Plain
ABN75P
0
50
0 Phone : 1-866-457-5710 50
Description
OCM Part No.
Anchor Bolt Round Cut Washer 1/2” Galvanized Anchor Bolt Round Cut Washer 1/2” Plain
Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com Wt. Lbs.
Box Qty.
ABW50G
0
50
ABW50P
0
50
FORMING PRODUCTS Anchor Bolt Round Cut Washer 3/4” Galvanized ABW75G 0 50 Anchor Bolt Round Cut Washer 3/4” Plain ABW75P To Order 0 50 Bar / Pry Bar T-PostsPRODUCTSBurke FORMING (Call, Fax or e-mail this form) *Additonal sizes of anchor bolts available and direct shipments available. To Order (Call, Fax or e-mail this form)
T-Posts
1. Part No. :
To Order (Call, Fax or e-mail this form)
OCM 1. Part No. : Part No. 2. Quantity : To Order (Call, Fax or e-mail this form) Phone : 1-866-457-5710 TPOST5SP-SPADEHD Fax : 1-847-541-9338 1. Part No. :: sales@ocm-inc.com e-mail 2. Quantity : TPOST6SP-SPADEHD
e-mail sales@ocm-inc.com 2.::Size : Fax 1-847-541-9338
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Rebar Cap
Rebar Cap
OCM OCM Part No. Part No. RC-DISC10 RC-DISC10 Qty RC-DISCHH-M RC-DISCHH-M
OCM Weight per pcs Part No. lbs Rolls/box TPOST5SP-SPADEHD 6.2 5 ORMING RODUCTS TPOST6SP-SPADEHD 7.5 5 OCM Weight per pcs Qty Part No. lbs Rebar Mushroom Cap Rolls/box TPOST5SP-SPADEHD 6.2 5 TPOST6SP-SPADEHD 7.5 5 To Order OCM
F
Size #3 - #8 #8 - #12
Size
Carton Qty #3 - #8 25 #8 - #12 25
Carton e-mail3.:Type Weight :Standard per pcs / Nominal sales@ocm-inc.com Weight per pcs Qty lbs lbs 4. Quantity : 250.50 0.50 250.50 0.50
California OSHA Approved
P
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
California OSHA Approved
Rebar FORMING PRODUCTS Mushroom Cap
Box Qty 500
Size
(Call, Fax or e-mail this form)
Part No. RC-MUSH
1. Part No. : 2. Quantity : 3. Lumber Size :
#3 - #8
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Punched Hole Strapping
Punched Hole Strapping
Weight per pcs 1. Part No. : Qty 2. Size : 2. Quantity : To Order lbs 3. Type Rolls/box :Standard / Nominal 3. Lumber (Call,Size Fax: or e-mail this form) 6.2 4. Quantity : 5 Phone : 1-866-457-5710 7.5 5: No. Fax 1.::Part 1-847-541-9338 Phone 1-866-457-5710
Weight per pcs lbs 0.02
To Order (Call, Fax or e-mail this form)
OCM Part No. RC-MUSH
Box Qty 500
Size #3 - #8
Pry Bar / Burke Bar OCM Part No. PHS-PB
Wt. Lbs 15.200
OCM Part No. PHS-PB
1. Part No. : 2. Size : 3. Type Weight :Standard / Nominal per pcs 4. Quantity : lbs 0.02 Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No. PB-OCM47 PB-OCM56
Wt. Lbs
Box Qty
15.200
1
Wt. Lbs
Length
Blade Width
7.00 15.00
47" 56-1/4"
3" 3"
Box Qty 1
37
Rebar Hand Tools & Accessories www.ocm-inc.com www.ocm-inc.com (866)-457-5710
Full line of Rebar Supports available. Plastic and metal Slab Bolster, SBU, Individual High Chairs, Grade Chairs, Plastic Wheel Spacers, Paving Chairs, Dowel Caps and Smooth Dowels.
Tie Wire
・16 or 16.5 gauge, 3.5 lb rolls, and 20 rolls per box/ 720 rolls per skid. ・Plain and PVC available. -OCM Part# TIW16 or TIW16.5 for Plain -OCM Part# TIW16-PVC for PVC Coated
Manual Rebar Cutter-Bender
・Cuts and Bends up to #5(5/8") Grade 60 Rebar. ・Sold unmounted OCM Part# RB-CUTTER-A ・Sold mounted on wood board # RB-CUTTER ・Permits Bending up to 180 degrees. ・JAWS are high strength steel and allow cutting of material up to 48 rockwell hardness.
#9/#11 Binding Wire
・100 lb rolls, 10 rolls per wire carrier. ・Used for tying rebar bundles. -OCM Part# TIW09-100 -OCM Part# TIW11-100
Rebar Hickey Bender ・20" Rebar Hickey Bender can be used for up to #3(3/8") Rebar -OCM Part# RBB20 ・22" Rebar Hickey Bender can be used for up to #4(1/2") Rebar -OCM Part# RBB22 ・34" Rebar Hickey Bender can be used for up to #5(5/8") Rebar -OCM Part# RBB34 ・Often these tools are used as pairs when making close radius bends.
Bag Ties
・4"-12" Plain or PVC coated are available. ・16 or 17 gauge available.
Bag Tie Hand Twister
・Wood Handle -OCM Part# BT-TWISTER
Rebar Hickey with Forged Head ・24" Handle length can bend up to #4(1/2") Rebar. -Double Heads at 65 degree angle. -Bending angle is 90 degree. -OCM Part# RBH50 ・40" Handle length can bend up to #5(5/8") Rebar. -Single head at 65 degree angle. -OCM Part# RBH62 ・40" Handle length can bend up to #5(5/8") Rebar. -Single head at 65 degree angle. -OCM Part# RBH75
Tie Wire Reel
・Aluminum die cast material. -OCM Part# TIW-REEL
OSHA Rebar Cap
・#3 - #8 Rebar -OCM Part# RC-DISC10 ・#8 -#12 Rebar -OCM Part# RC-DISCHH-M
OCM Multipurpose Pry Bar
Rebar Mushroom Cap
・47" Handle weighs 7 lbs and has a 3" blade. -OCM Part# PB-OCM47 ・56" Handle weighs 15 lbs and has a 3" blade. -OCM Part# PB-OCM56
・#3 - #8 Rebar -OCM Part# RC-MUSH
38
Rebar Hand Tools & Accessories
FORMING PRODUCTS Rebar CutterBender
Description
OCM Part No.
Wt. lbs.
Manual Rebar Bender/Cutter - Cuts And Bends Up To #5 (5/8”) (16Mm) Grade 60 Rebar
RB-CUTTER
Box Qty.
Tie Wire Reel - Zinc Diecast
Rebar Hickey Bender
n
e.
www.ocm-inc.com
35
Description
OCM Part No.
Wt. lbs.
Box Qty.
Rebar Bender - 20” Long - For Up To #3 (3/8”)(10mm) Rebar
RBB20
2.3
1
RBB22 Order
2.7
1
Rebar Hickey - 22” Long - For Up To #4 (1/2”)(13mm) Rebar To
Rebar Hickey - 34” Long - For Up To #5 (5/8”)(16mm) Rebar (Call, RBB34 Fax or
Rebar Hickey
OCM Part No.
Description Rebar Hickey - For Up To #4 (1/2”)(13mm) Rebar
RBH50
Rebar Hickey - For Up To #5 (5/8”)(16mm) Rebar
RBH62
Rebar Hickey - For Up To #6 (3/4”)(19mm) Rebar
RBH75
Tie Wire
Tie Wire PVC coated available
1
1
1 Phone10 : 1-866-457-5710 Fax : 1-847-541-9338 Weight per pcs : sales@ocm-inc.com Box e-mail lbs.
Qty.
3.5 lbs.
20
TIW16-PVC
16 ga.
3.5 lbs.
20
TIW16.5
16.5 ga.
3.5 lbs.
20
OCM Part No. TIW-REEL
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Weight per pcs lbs 2.0 lbs
9
16 ga.
To Order (Call, Fax or e-mail this form)
OCM Part No. TIW-REEL
Box Qty.
TIW16
7,:
Qty Rolls/box 1
39
1 form) this
Wt.
1. Partlbs. No. : 2. Quantity : 3.5
Wire Gauge
*For Tying FORMING PRODUCTS 7,: Rebar Bundles Tie Wire Reel - Zinc Diecast
1. Part No. : 2. Quantity :
6 e-mail
OCM Part No.
Binding Wire Wire #9 / #11 Binding #9 / #11 2&0 3DUW 1R Binding Wire #9 / #11
Tie Wire Reel - Zinc Diecast
1
:LUH *DXJH JD :LUH
JD :LUH
Weight per pcs lbs 2.0 lbs
:HLJKW OEV SHU UROO OEV OEV Qty Rolls/box 1
FORMING PRODUCTS Rebar Hand Tools & Accessories www.ocm-inc.com
Bag Tie Hand Twister - Wood H
Bag Tie
Bag Tie
Description
Size
Bag Ties Bar Loop Ties Bundle Qty 5000
OCM Part No. OCMBTP
Bundle Qty 5000
OCM Part No. OCMBTP
PVC Bag Ties
Bag Ties Bar Loop Ties (Atlanta/Dallas/ Houston)
FORMING PRODUCTS
Bag Ties Bar Loop Ties (Florida Only)
Bag Tie Hand Twister - Wood Hand To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Bag Tie Hand Twister Wood Handle
Type
Safe Working Load lbs
40
Wt. lbs.
Bag Quantity
4”
BT16-4
30
To Order5,000/Bag 1,000/Bundle;
4.5”
BT16-4.5
30
(Call, Fax5,000/Bag or e-mail 1,000/Bundle;
5”
BT16-5
34
1,000/Bundle; 5,000/Bag
5.5”
BT16-5.5
34
1,000/Bundle; 5,000/Bag 1. Part No. :
6”
BT16-6
43
7”
BT16-7
46
1,000/Bundle; 5,000/Bag 2. Quantity :
8”
BT16-8
48
9”
BT16-9
53
10”
BT16-10
58
12”
BT16-12
63
6”
BT16-6-PVC
43
1,000/Bundle; 5,000/Bag
7”
BT16-7-PVC
46
1,000/Bundle; 5,000/Bag
8”
BT16-8-PVC
48
1,000/Bundle; 5,000/Bag
9”
BT16-9-PVC
53
1,000/Bundle; 5,000/Bag
4”
BT17-4
30
1,000/Bundle; 5,000/Bag
4.5”
BT17-4.5
30
1,000/Bundle; 5,000/Bag
1,000/Bundle; 5,000/Bag Phone : 1-866-457-5710
1,000/Bundle; 5,000/Bag Fax : 1-847-541-9338
1,000/Bundle; e-mail : 5,000/Bag sales@ocm-inc.com 1,000/Bundle; 5,000/Bag
5”
BT17-5
34
1,000/Bundle; 5,000/Bag
BT17-5.5
34
1,000/Bundle; 5,000/Bag
6”
BT17-6
43
1,000/Bundle; 5,000/Bag
6.5”
BT17-6.5
46
1,000/Bundle; 5,000/Bag
7”
BT17-7
48
1,000/Bundle; 5,000/Bag
7.5”
BT17-7.5
50
1,000/Bundle; 5,000/Bag
8”
BT17-8
53
1,000/Bundle; 5,000/Bag
9”
BT17-9
58
1,000/Bundle; 5,000/Bag
12”
BT17-12
63
1,000/Bundle; 5,000/Bag
4.5”
BT17-4.5-F
24
1,000/Bundle - 4,000/Bag
5.5”
BT17-5.5-F
27
1,000/Bundle - 4,000/Bag
6”
BT17-6-F
35
1,000/Bundle - 4,000/Bag
6.5”
BT17-6.5-F
37
1,000/Bundle - 4,000/Bag
7”
BT17-7-F
38
1,000/Bundle - 4,000/Bag
7.5”
BT17-7.5-F
40
1,000/Bundle - 4,000/Bag
8”
BT17-8-F
42.5
1,000/Bundle - 4,000/Bag
9”
BT17-9-F
46.5
1,000/Bundle - 4,000/Bag
9.5”
BT17-9.5-F
50.5
1,000/Bundle - 4,000/Bag
Type
this form)
1,000/Bundle; 5,000/Bag
5.5”
OCM Part No. BT-TWISTER OCM Part No. BT-TWISTER
OCM Part No.
Safe Working Load lbs
Heavy Duty Forming Products www.ocm-inc.com
She-Bolts
She Bolt External Thread
OCM Part No.
OCM External Internal Part No. Thread Thread 507518SBP 3/4" 1/2" 507520SBP 507524SBP 6210018SBP 1" 5/8" 6210020SBP 6210024SBP 7512520SBP 7512524SBP 1-1/4" 3/4" 7512530SBP 7512536SBP 10015020SBP 10015024SBP 1-1/2" 1" 10015030SBP 10015036SBP SWL provides a safety factor of apporoximately 2 to 1.
Taper Tie Taper
Tie
Inside Tie Rod Thread Type
Diameter
Type
Diameter
3/4”
Acme
1/2”
Coil
20”
9,000
SB7550-17
3/4”
Coil
1/2”
Coil
17”
9,000
SB7550-24P
3/4”
Coil
1/2”
Coil
24”
9,000
SB7550-20P
3/4”
Coil
1/2”
Coil
20”
9,000
SB12575-18
1-1/4”
Coil
3/4”
Coil
18”
18,000
SB12575-20
1-1/4”
Coil
3/4”
Coil
20”
18,000
SB12575-24P
1-1/4”
Coil
3/4”
Coil
24”
18,000
SB12575-30
1-1/4”
Coil
3/4”
Coil
30”
18,000
SB15010020-P
1-1/2”
Coil
1”
Coil
20”
37,500
Over All Safe Working Load Length lbs 18" 9,000 20" 24" 18" 12,000 20" 24" 20" 24" 18,000 3SWL 0" provides a safety factor 36" 20" 24" 37,500 30" Large End 36"OCM
SB150100-24P
1-1/2”
Coil
1”
Coil
24”
37,500
SB150100-30-8
1-1/2”
Coil
1”
Coil
30”
37,500
SB125100-20-12-3
1-1/4”
Coil
1”
Coil
20”
37,500
of apporoximately 2 to 1.
FORMING PRODUCTS
Overall Length 42.5" 60" 42.5" Small End 72" Thread 66"
3/4" 75100TT60P 1" 3/4" * Additional Length Available upon Request 1" 75100TT42P 3/4" 100125TT72P 1-1/4" 1" 100125TT66P 1-1/4" 1" SWL provides a safety factor of apporoximately 2 to 1.
of Tie
Small End of Tie
Part No.
Coil Thread Diameter
Length of Thread
Coil Thread Diameter
Length of Thread
Standard Tie Lengths
Tapered Body Diameter
Safe Working Load (lbs)
7575TT42P
3/4”
10”
3/4”
6”
42”
.750” to .670”
7,500
7550TT36
3/4”
10”
1/2”
2”
36”
.670” to .500”
7,500
7550TT48P
3/4”
10”
1/2”
2”
48”
.670” to .500”
7,500
75100TT42P
1”
10”
3/4”
6”
42”
.884” to .750”
18,000
10075TT48P
1”
10”
3/4”
6”
48”
.884” to .750”
18,000
75100TT54P
1”
10”
3/4”
6”
54”
.884” to .750”
18,000
75100TT60P
1”
10”
3/4”
6”
.884” to .750”
18,000
100125TT36P
1-1/4”
10”
1”
D6”
60”
100125TT48P
1-1/4”
10”
1”
6”
48”
1.113” to 1.00”
34,000
Safe Working Load lbs 1-1/4” 42.5" 18,000 100125TT66P 1-1/4” 60" 18,000 42.5" 18,000 100125TT72P 1-1/4” 72" 34,000 66" 34,000
10”
1”
6”
54”
1.113” to 1.00”
34,000
10”
1”
6”
66”
10”
1”
6”
72”
10”
1”
6”
45”
Safe Working Load lbs 18,000 18,000 18,000 Overall 34,000 Length 34,000
100125TT54P
125100TT45P
1-1/4”
SWL provides a safety factor of apporoximately 2 to 1. *Additional Length Available upon Request.
* Additional Length Available upon Request
Safe Working Load lbs
SBA7550-20P
Acme Nut Washer OCM Large End Small End Part No. Thread Thread 7575TT42P 3/4" 3/4" 75100TT60P 1" 3/4" 75100TT42P 1" 3/4" OCM Large End 100125TT72P 1-1/4" 1" Thread1" 100125TT66P Part No. 1-1/4" SWL provides a 7575TT42P safety factor of apporoximately3/4" 2 to 1.
Overall Length
CoilCoil Nut Washer Nut Washer
OCM Part No. 50CNW 75CNW
D
D
D Size 1/2" 3/4"
DIA
DIA Washer Dia. 4" 4"
36”
To Order 1.113” to 1.00” 34,000 (Call, Fax or e-mail this form) 1. Part No. : 1.113” to 1.00” 2. Size : 1.113” to 1.00” 3. Quantity : 1.113” to 1.00”
34,000 34,000 34,000
Phone : 1-866-457-5710 Fax : 1-847-541-9338 sales@ocm-inc.com Weight per pcs e-mail Safe: Working Load lbs 0.75 0.75
lbs 4,500 9,000
SWL provides a safety factor of apporoximately 2 to 1.
FORMING PRODUCTS FORMING PRODUCTS DIA
DIA Acme Nut Washer Acme Nut Washer D
D
OCM Part No. To Order (Call, Fax or e-mail this form) 75ANW
D Size 3/4"
To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Size : 1. Part No. 3. Quantity :
Weight per pcs lbs 0.75
:
2. Size
SWL: provides a safety factor of apporoximately 2 to 1.
3. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com Phone : 1-866-457-5710
Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
DIA
DIA OCM Part No. 75ANW
D Size 3/4"
Weight per pcs lbs 0.75
SWL provides a safety 1. OCM D factor of apporoximately Weight per2 topcs Part No. Size lbs 75ANW 3/4" 0.75
SWL provides a safety factor of apporoximately 2 to 1.
Safe Working Load lbs 9,000
Safe Working Load lbs 9,000
41
Safe Working Load lbs 9,000
Bridge Forming Products www.ocm-inc.com
Deep Bridge Overhang Bracket 54"
MXVWV +HLJKW $G WR
Height Adjusts
50" to 70"
Bridge OverhangBracket Bracket Bridge Overhang OCM Part No. OCM-BOB
Weight per pcs lbs 45
S.W.L lbs 3,750
OCM Part No. OCM-BOBLGN
Weight per pcs lbs 53
S.W.L lbs 3,750
Guard Rail & Extender Available *XDUG 5DLO ([WHQGHU $YDLODEOH
Gaurd Rail & Extender Available
*Proper Engineering REQUIRED
Deep Bridge Overhang Bracket Deep Bridge Overhang Bracket
Deep Bridge Overhang Bracket OCM Part No. 54" OC MBOB
Weight per pcs lbs 45
Guard Rail & Extender Available Guard Rail & Extender Available
72"*Proper Bridge Overhang Engineering REQUIREDBracket
50" to 70"
Height Adjusts
50" to 70"
Height Adjusts
50" to 70"
54"
Height Adjusts
54"
*Proper Engineering REQUIRED
Guard Rail & Extender Available
72"*Proper Bridge Overhang Bracket 72" Bridge Overhang Bracket Engineering REQUIRED
QQHO +RUL]RQWDO &KD +HLJKW
QHO +RUL]RQWDO &KDQ +HLJKW UL]R QWDO
OCM Part No. OCM-BOBDH72
Description
Bridge Overhang Bracket 72"
Weight per pcs lbs 145
WR
WR
MXVWV +HLJKW $G
+HLJKW $
GMXVWV
WR
&KDQQHO +R +HLJKW
+HLJKW $
GMXVWV
3URSHU (QJLQHHULQJ 5(48,5(' 3URSHU (QJLQHHULQJ 5(48,5('
Super Duty Bridge Overhang Bracket
Super Duty Bridge Overhang Bracket
90" Super Duty Bridge Overhang Bracket
90"
Description Super Duty Bridge Overhang Bracket 90"
Weight per pcs lbs 159
"
30" to 68 30" to 68 " "
Height
Height
Heigh Adjusts t Adjusts
OCM Part No. OCM-BOBDH90 30" to 68
90"
el
nnel Chann nta Cha talrizo 3URSHU (QJLQHHULQJ 5(48,5(' HorizonHo = 6"ight = 6" Height He
Adjusts
nnel Horizontal Cha Height = 6"
*Proper Engineering REQUIRED *Proper Engineering REQUIRED
Junior Overhang Junior OverhangBracket Bracket *Proper Engineering REQUIRED
OCM Part No. OCM-BOBJR
Description Bridge Overhang Bracket Junior
Weight per pcs lbs 35
3URSHU (QJLQHHULQJ 5(48,5('
Western Bridge Overhang Bracket 3URSHU (QJLQHHULQJ 5(48,5(' OCM Part No. OCM-BOBW42 OCM-BOBW28
42 OCM Part No.
Size
Weight per pcs lbs
Size 42" 28"
Weight per pcs lbs 50 40
Bridge Forming Products www.ocm-inc.com
Bridge Bracket BridgeOverhang Overhang Bracket Extension Extension OCM Part No. OCM-BOBEX-D
Description Overhang-Bracket Extension (NOT Set)
Weight per pcs lbs 3.0
* Includes two 1/2" x 1" Bolts and Nuts
Bridge Overhang Bracket Bridge Overhang Bracket Bridge Overhang Bracket Guard Rail Receptacle Guard Rail Receptacle Guard Rail Receptacle
OCM Part No. OCM-GRR
Weight per pcs lbs 3.5
Description 2 x 4 Guard Rail Receptacle
* Includes two 1/2" x 3" Bolts and Nuts
it Conversion Kit nK rsio ve Con
OCM Part No. OCM-BOBCONV
Description Bridge Overhang Bracket Conversion Kit
Weight per pcs lbs 19.6
-Converts Standard Adjustable OCM-BOB (49) to a Deep Bracket OCM-BOBLGN (49D).
BOB Wall Plate )RU %ULGJH 2YHUKDQJ %UDFNHW BOB Wall Plate )RU %ULGJH 2YHUKDQJ %UDFNHW BOB Wall Plate S
3UR
)RU %ULGJH 2YHUKDQJ %UDFNHW
3URSHU (QJLQHHULQJ 5(48,5('
'
,5(
48
5(
ULQJ
LQHH
QJ HU (
OCM Part No. WPLT-ASSY WPLP-WASHER
Weight per pcs lbs 1.65 0.40
Hook Bolt
Hook Bolt
OCM Part No. BHD1LA-3P BHD1LA-3.5P BHD1LA-4.5P BHD1LA-5P BHD1LA-6.5P BHD1LA-4.5G
Size D
Length
Box Qty
1/2"
3" 3-1/2" 4-1/2" 5" 6-1/2" 4-1/2"
150
- Plain or Galvanized available.
43
Exterior Bridge Hangers www.ocm-inc.com
HEAVY TY-BACK 90 0 - 45 0 HANGER
HEAVY TY-BACK 90 0 - 45 0 HANGER OCM Part No. BH-HTBH-A BH-HTBH-A-75 BH-HTBH-AS (Supplement)
Safe Working Load lbs 6,000 10,000 6,000
Dia 1/2" 3/4" 1/2"
-SWL provides a safety factor of apporoximately 2 to 1.
specify flange width and finish (PLAIN or HDG) when ordering. TYPE#1 90 0 - 45 0 -Please ANGLE HANGER
TYPE#1 90 0 - 45 0 ANGLE HANGER
OCM Part No. BH-HFR-A
Safe Working Load lbs 3,800
Dia 1/2"
-SWL provides a safety factor of apporoximately 2 to 1. 0 and finish (PLAIN or HDG) when ordering. TYPE-Please #3 specify 90 0flange - 45width
TYPE#2 AND HAUNCH TYPE#2 AND ANGLE TYPE #3 HANGER 90 - 45 0
0
HAUNCH ANGLE HANGER OCM Part No. BH-HRH-A #2 BH-HRH-A #3
Haunch Height 1" 1-1/2"
Dia 1/2" 1/2"
Safe Working Load lbs 3,000 3,000
-SWL provides a safety factor of apporoximately 2 to 1.
-Please specify flange width, finish (PLAIN or HDG), and Haunch Height (#2 or #30 when ordering. 45 0 PRECAST ANGLE HANGER
45 0 PRECAST ANGLE HANGER OCM Part No. BH-PHFR-HA BH-PHHFR-HA
Dia
TYPE
1/2"
STANDARD HEAVY DUTY
Safe Working Load lbs 4,500 6,000
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify finish (PLAIN or HDG) when ordering.
TYPE#1 90 - 45 BROACH HANGER 0
0
TYPE#1 90 0 - 45 0 BROACH HANGER OCM Part No. BH-BHFR-A
Dia 1/2"
Girder Flange Width 14"
Qty per Box 200
Safe Working Load lbs 4,500
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width, drop height, and finish ( PLAIN or HDG) when ordering.
HEAVY TYPE#1 45 0 HEAVY TYPE#1 45 0 TY-DOWN HANGER
TY-DOWN HANGER
OCM Part No. BH-HHFR-HKA BH-HHFR-HKA-75
Dia 1/2" 3/4"
Safe Working Load lbs 6,000 10,000
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width and finish (PLAIN or HDG) when ordering.
44
Exterior Bridge Hangers TYPE#1 45 HALF HANGER 0
www.ocm-inc.com
45 0 Angle Half Hanger HFR-HA
TYPE#1 45 0 HALF HANGER TYPE#1 45 0 HALF HANGER 45 0 Angle Half Hanger HFR-HA
OCM Part No. BH-HFR-HA BH-HFR-HWA
45 0 Angle Half Hanger HFR-HA 45 0 Angle Half Hanger HFR-HWA
45 0 Angle Half Hanger HFR-HWA
Dia
Style
Qty per Box
Safe Working Load lbs
1/2"
Shaped Straight
200
3,800
-SWL provides a safety factor of apporoximately 2 to 1.
-CAUTION: Care should be exercised when welding any hanger. TYPE#1 45 0 ADJUSTABLE HALF HANGER 45 0 Angle Half Hanger HFR-HWA
TYPE#1 45 0 ADJUSTABLE HALF HANGER
OCM Part No. BH-HFR-HAJ-A-1 BH-HFR-HAJ-A-2
Dia
Clips
Qty per Box
1/2"
1 2
200
Safe Working Load lbs 1,100 3,000
-SWL provides a safety factor of apporoximately 2 to 1. 0 clips available 0 upon request. -Extra -Available in PLAIN or HDG.
TYPE#1 HEAVY 15 - 45 ANGLE HANGER
TYPE#1 HEAVY 15 0- 45 0 ANGLE HANGER
OCM Part No. BH-HHFRL-A BH-HHFRL-AS
Dia 1/2"
Safe Working Load lbs To be determined by Application
-SWL provides a safety factor of apporoximately 2 to 1. 15 0--Please 45 0 specify flange width and finish (PLAIN or HDG) when ordering.
TYPE#1 HEAVY ANGLEHEAVY HANGER TYPE#1 15 0- 45 0 ANGLE HANGER
OCM Part No. BH-HFRL-A
Dia 1/2"
Safe Working Load lbs 3,800
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width and finish (PLAIN or HDG) when ordering.
45
Interior Bridge Hangers www.ocm-inc.com
HEAVY TY - BACK 90 0- 90 0 HANGER OCM 0 TY0-- 90 BACK 90 0- 90 0 HANGER HEAVY TY HEAVY - BACK 90 HANGER
Safe Working Load lbs 6,000 10,000
Dia
Part No. BH-HTBH BH-HTBH-75
1/2" 3/4"
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width and finish (PLAIN or HDG) when ordering. 0 TYPE#1 90 0- 90 TYPE#1 90 0HANGER - 90 0 HANGER
OCM Part No. BH-HFR
TYPE#1 90 0- 90 0 HANGER
Safe Working Load lbs 3,800
Dia 1/2"
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width and finish (PLAIN or HDG) when ordering.
TYPE#2 AND TYPE#3 90 0- 90 0 TYPE#2 AND TYPE#3 90 - 90 HAUNCH HANGER HAUNCH HANGER 0
0
OCM Part No. BH-HRH-2 BH-HRH-3
Haunch Height 1" 1-1/2"
Safe Working Load lbs 3,000
-SWL provides a safety factor of apporoximately 2 to 1.
90 0 PRECAST HALF HANGER 90 0 PRECAST HALF HANGER OCM Part No. BH-PHFR-H BH-PHTBH-H
Dia
Type
Girder Flange Width
Qty per Box
1/2"
STANDARD HEAVY DUTY
14"
200
Safe Working Load lbs 3,500 6,000
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify PLAIN or HDG when ordering.
90 0 - 90 0 BROACH HANGER
90 0 - 90 0 BROACH HANGER 0 0 90 - 90 BROACH HANGER
OCM Part No. BH-BH
Dia 1/2"
Safe Working Load lbs 4,500
-SWL provides a safety factor of apporoximately 2 to 1.
HEAVY - TY - BACK 90 0 -Please specify flange width and drop height when ordering. TY - DOWN HANGER HEAVY - TY - BACK 90 0
TY - DOWN HANGER
OCM Part No. BH-HTBH-HK BH-HTBH-HK-75
Dia
1/2" 3/4"
Safe Working Load lbs 6,000 10,000
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width and finish (PLAIN or HDG) when ordering.
46
Interior Bridge Hangers www.ocm-inc.com
TYPE#1 90 0 TY - DOWN HANGER TYPE#1 90 0 TY - DOWN HANGER OCM
TYPE#1 90 TY - DOWN HANGER 0
Part No. BH-HFR-HK
Safe Working Load lbs 3,800
Dia 1/2"
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width and finish (PLAIN or HDG) when ordering.
TYPE#1 90 0 HALF HANGER , TYPE#1 90 0 HALF HANGER , OCM TYPE#2 AND TYPE#3 TYPE#2 AND TYPE#3 Part No. HAUNCH HALF HANGER HAUNCH HALF HANGER BH-HFR-H BH-HFR-HW: BH-HFR-H: BH-HFR-HW: 90 0 Half Hanger(Straight Strut) BH-HFR-H:90 0 Half Hanger 90 0 Half Hanger(Straight Strut) 90 0 Half Hanger
BH-HFR-HW BH-HRH-H #1 BH-HRH-H #2 BH-HRH-H #3 BH-HRH-HW
BH-HRH-HW: BH-HRH-H: BH-HRH-H:90 0 Half HaunchBH-HRH-HW: Hanger 90 0 Haunch Half Hanger 90 0 Half Haunch Hanger 90 0 Haunch Half Hanger
TYPE#1 90 0 ADJUSTABLE HALF HANGER 0 TYPE#1 90 ADJUSTABLE HALF HANGER
Haunch Height
Safe Working Load lbs 3,500 3,500 3,000 3,000 3,000 3,000
3/8" 1" 1-1/2"
-SWL provides a safety factor of apporoximately 2 to 1. -CAUTION: Care must be taken when welding a hanger.
OCM Part No. BH-HFR-HAJ-1 BH-HFR-HAJ-2
Dia
Clips
1/2"
1 2
Safe Working Load lbs 1,100 3,000
-SWL provides a safety factor of apporoximately 2 to 1.
HEAVY 15 - 15 HANGER HEAVY 15 - 15 HANGER 0
0
0
0
OCM Part No. BH-HHFRL
HEAVY 15 0 - 15 0 HANGER
Dia 1/2"
Safe Working Load lbs 6,000
-SWL provides a safety factor of apporoximately 2 to 1.
TYPE#1 1500 - 15 0 HANGER 0 TYPE#1 HANGER 0 15 0 15 TYPE#1 15 - 15 HANGER
OCM Part No. BH-HFRL
Dia 1/2"
Safe Working Load lbs 3,800
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify flange width and finish (PLAIN or HDG) when ordering.
PRECAST HANGER 0 1515 PRECAST HALFHALF HANGER OCM 15 0 PRECAST HALF HANGER Part No. 0
BH-PHFRL-H BH-PHHFRL-H
Type Standard Heavy Duty
-SWL provides a safety factor of apporoximately 2 to 1. -Please specify finish (PLAIN or HDG) when ordering.
47
Safe Working Load lbs 3,500 6,000
(Call, Fax or e-mail this form) 1. Part No. : 2. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Bar Supports
SLAB BOLSTER TIPPED/DIPPED
www.ocm-inc.com
SLAB BOLSTER PLAIN SLAB BOLSTER PLAIN
OCM Part No. SB75-P To Order (Call, Fax or e-mail this SB100-P form) SB125-P 1. Part No. : 2. Quantity : SB150-P Phone : 1-866-457-5710 SB200-P Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com SB225-P SB250-P SB300-P
Weight lbs 0.21 0.22 0.23 0.23 0.23 0.24 0.25 0.27
SLAB BOLSTER TIPPED/DIPPEDOCM OCM Weight Bundle Qty Part No. SLAB BOLSTER TIPPED/DIPPED Part No. lbs lf
Weight lbs 0.21 0.22 0.23 0.23 0.23 0.24 0.25 0.27 0.28 0.30 0.32
To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No. SB75-P SB100-P SB125-P SB150-P SB200-P SB225-P SB250-P SB300-P
OCM Part No. SB75-PT/PD2 SB100-PT/PD2 SB125-PT/PD2 SB150-PT/PD2 SB200-PT/PD2 SB225-PT/PD2 SB250-PT/PD2 SB300-PT/PD2 SB325-PT/PD2 SB350-PT/PD2 SB400-PT/PD2
Weight lbs 0.21 0.22 0.23 0.23 0.23 0.24 0.25 0.27
Weight lbs 0.21 0.22 0.23 0.23 0.23 0.24 0.25 0.27 0.28 0.30 0.32
Bundle Qty SB75-P 0.21 lf SB100-P 0.22 100 SB125-P 0.23 To Order 100 SB150-P 0.23 (Call, Fax or e-mail this form) 100 SB200-P 0.23 1. Part No. 100 : SB225-P 0.24 2. Quantity 100 : SB250-P 0.25 100 Phone : 1-866-457-5710 SB300-P 0.27 Fax : 1-847-541-9338 100 e-mail : sales@ocm-inc.com 100
OCM Part No. Bundle Qty SB75-PT/PD2 lf SB100-PT/PD2 SB125-PT/PD2 100 SB150-PT/PD2 100 SB200-PT/PD2 100 SB225-PT/PD2 100 SB250-PT/PD2 100 SB300-PT/PD2 100 SB325-PT/PD2 100 SB350-PT/PD2 100 SB400-PT/PD2 100 100 100
Weight lbs 0.21 0.22 0.23 0.23 0.23 0.24 0.25 0.27 0.28 0.30 0.32
SB75-PT/PD2 SB100-PT/PD2 100 SB125-PT/PD2 1. Part No.100 : 2. Quantity100 : SB150-PT/PD2 100 Phone : 1-866-457-5710 SB200-PT/PD2 Fax : 1-847-541-9338 100 e-mail : sales@ocm-inc.com 100 SB225-PT/PD2 SB250-PT/PD2 SB300-PT/PD2 SB325-PT/PD2 SB350-PT/PD2 Bundle Qty SB400-PT/PD2 lf 100
To Order 100 (Call, Fax or e-mail this form)
Bundle Qty
1. Part No. : lf 2. Quantity :100
100 Phone : 1-866-457-5710 Fax : 1-847-541-9338 100 e-mail : sales@ocm-inc.com 100 100 100 100 100
Bundle Qty lf 100 100 100 100 100 100 100 100 100 100 100
SLAB BOLSTER With SAND PLATE OCM Weight
SLAB BOLSTER EPOXY SLAB BOLSTER EPOXY
SLAB BOLSTER EPOXY & DIPPED
To Order (Call, Fax or e-mail this form)
100 100 100 100 100 100 100 100 100 100 100
Part No. SB75-E SB100-E SB125-E SB150-E SB200-E SB225-E SB250-E SB300-E
Height 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/4" 2-1/2" 3"
Bundle Qty lf lbs 0.21 0.22 To Order 0.23 (Call, Fax or e-mail this form) 0.23 100 1. Part No. : 0.23 2. Quantity : 0.24 0.25 Phone : 1-866-457-5710 0.27 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No. SB100-EPD SB150-EPD SB200-EPD SB300-EPD
Height 1" 1-1/2" 2" 3"
Bundle Qty lf
Weight lbs 0.39 0.40 0.41 0.43
100
SLAB BOLSTER With SAND PLATE OCM Part No. SB200-PP SB300-PP
BEAM BOLSTER TIPPED/DIPPED
OCM Part No. BB100-PD2 BB150-PD2 BB200-PD2 BB300-PD2
Weight lbs 0.27 0.35
Height 1" 1-1/2" 2" 3"
Additional * sizes from 3/4" to 5" available. **Please inquire about domestic and CRSI requirements.
48
Bundle Qty lf 100 100
Weight lbs 0.26 0.26 0.28 0.32
Bundle Qty lf 100
Bar Supports www.ocm-inc.com
Beam Bolster Upper-PLAIN OCM Part No. Beam Bolster Upper-PLAIN BBU100-P
1" 1-1/2" 2" 3"
BBU150-P BBU200-P BBU300-P
To Order (Call, Fax or e-mail this form) To Order (Call, Fax or e-mail this form)
1. Part No. : 2. Quantity :
1. Part No. : 2. Quantity :
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com OCM
Slab Bolster Upper-PLAIN Slab Bolster Upper-PLAIN Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No. BBU100-P BBU150-P BBU200-P BBU300-P OCM Part No. SBU75-P3 SBU100-P3 SBU125-P3 SBU150-P3 SBU175-P3 SBU200-P3 SBU225-P3 SBU250-P3 SBU275-P3 SBU300-P3 SBU325-P3 SBU350-P3 SBU375-P3 SBU400-P3 SBU425-P3 SBU450-P3 SBU475-P3 SBU500-P3 SBU525-P3 SBU550-P3 SBU600-P3
OCM To Order Weight Part No. (Call, Fax or e-mail this form) lbs WeightBBU100-P1. Part No. Bundle Qty 0.42 : lbs BBU150-P2. Quantity : lf 0.44 0.42 BBU200-P 100 Phone : 1-866-457-57100.61 0.44 BBU300-PFax : 1-847-541-9338 100 0.77 e-mail : sales@ocm-inc.com 0.61 100 OCM Weight 0.77 Part No. 100 lbs
3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3" 3-1/4" 3-1/2" 4" 4-1/4" 4-1/2" 4-3/4" 5" 5-1/2" 6"
SBU350-E SBU400-E SBU425-E SBU450-E SBU500-E SBU525-E SBU550-E SBU600-E
Bundle Qty lf 100
Bundle Qty lf
Slab Bolster Upper-EPOXY
Weight SBU75-P3 Bundle Qty 0.38 *Taller sizes uponlfrequest. SBU100-P3 0.39 lbs SBU125-P3 0.40 0.38 100 SBU150-P3 0.40 Typical Applications 0.39 100 include: SBU175-P3 0.40 0.40 100 -Slab on grade. SBU200-P3 0.40 0.40 100 on deck.100 SBU225-P3 0.41 0.40-Slab SBU250-P3 the 0.40-Supporting 100upper0.42 mat of SBU275-P3 0.43 0.41 100 reinforcing steel in concrete. SBU300-P3 0.44 0.42 100 SBU325-P3 0.48 0.43 100 SBU350-P3 0.48 0.44 100 SBU375-P3 0.48 0.48 100 SBU400-P3 0.48 0.48 100 SBU425-P3 0.50 0.48 100 SBU450-P3 0.52 0.48 100 SBU475-P3 0.52 0.50 100 SBU500-P3 0.52 0.52 100 SBU525-P3 0.58 0.52 100 SBU550-P3 0.64 0.52 100 SBU600-P3 0.64 0.58 100 0.64 100 0.64 100
OCM Part No. WeightSBU175-E lbs SBU100-E 0.38 SBU125-E 0.38 SBU150-E OCM 0.39 SBU175-E 0.40 SBU200-E Part No. 0.40 SBU225-E SBU175-E 0.40 SBU250-E 0.42SBU100-E SBU275-E 0.44SBU125-E SBU300-E 0.48 SBU325-E SBU150-E 0.48 SBU350-E 0.48SBU175-E SBU400-E 0.52SBU200-E SBU425-E 0.64SBU225-E SBU450-E 0.64 SBU500-E 1.64SBU250-E SBU525-E 3.64SBU275-E SBU550-E 4.64SBU300-E SBU600-E 5.64 SBU325-E 7.64
Weight lbs 0.38 0.39 0.40 0.40 0.40 0.40 0.41 0.42 0.43 0.44 0.48 0.48 0.48 0.50 0.52 0.52 0.52 0.64 0.64
Height
Part No. SBU75-P3 SBU100-P3 To Order (Call, Fax or e-mail this form) SBU125-P3 Bundle Qty SBU150-P3 1. Part No. : lf 2. Quantity : SBU175-P3 100 Phone : 1-866-457-5710 SBU200-P3 100 Fax : 1-847-541-9338 SBU225-P3 e-mail : sales@ocm-inc.com 100 SBU250-P3 100 SBU275-P3 Bundle Qty lf SBU300-P3 100 SBU325-P3 100 SBU350-P3 100 100 SBU400-P3 100 SBU425-P3 100 SBU450-P3 100 100 SBU475-P3 100 SBU500-P3 100 100 SBU550-P3 100 SBU600-P3 100
Weight lbs Bundle Qty0.38 lf 0.38 100 0.39 100 0.40 100 0.40 Weight 100 0.40 lbs 100 0.42 0.38 100 0.44 100 0.48 0.38 100 0.48 0.39 100 0.48 0.40 100 0.52 0.40 100 0.64 100 0.64 0.40 100 1.64 0.42 100 3.64 0.44 100 4.64 100 5.64 0.48 100 7.64 0.48 100 0.48 100
0.52 0.64 0.64 1.64 3.64 4.64 5.64 7.64
Slab Bolster Upper EPOXY & DIPPED
100
100 * Please inquire about domestic and CRSI requirements. 100 100 100 100 100 100 100
Slab Bolster Upper-EPOXY OCM Slab Bolster Upper-EPOXY Part Slab Bolster Upper-EPOXY No.
OCM Part No. SBU175-E SBU100-E SBU125-E SBU150-E SBU175-E SBU200-E SBU225-E SBU250-E SBU275-E SBU300-E SBU325-E SBU350-E SBU400-E SBU425-E SBU450-E SBU500-E SBU525-E SBU550-E SBU600-E
Weight lbs 0.42 0.44 0.61 0.77
Height
Bundle Qty lf 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
SBU175-E SBU100-E SBU125-E SBU150-E SBU175-E SBU200-E SBU225-E SBU250-E SBU275-E Bundle Qty SBU300-E lf SBU325-E 100 SBU350-E 100 100 SBU400-E 100 SBU425-E 100 SBU450-E 100 100 SBU500-E 100 SBU525-E 100 SBU550-E 100 100 SBU600-E
100 100 OCM 100 Part100 No. 100 SBU100-EPD 100 100 SBU150-EPD 100
SBU200-EPD
49
Weight lbs 0.38 0.38 0.39 0.40 0.40 0.40 0.42 0.44 0.48 0.48 0.48 0.52 0.64 0.64 1.64 3.64 4.64 5.64 7.64
Bundle Qty lf 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Wt. lbs.
Bundle Qty lf
0.39
100
0.4
100
0.41
100
Bar Supports www.ocm-inc.com
Continuous Mesh Chair Upper-PLAIN
OCM Height Part No. SBU75-P2 3/4" SBU100-P2 1" SBU125-P2 1-1/4" SBU150-P2 1-1/2" SBU175-P2 1-3/4" SBU200-P2 2" SBU225-P2 2-1/4" SBU250-P2 2-1/2" SBU275-P2 2-3/4" SBU300-P2 3" SBU325-P2 3-1/4" SBU350-P2 3-1/2" SBU400-P2 4" SBU425-P2 4-1/4" SBU450-P2 4-1/2" SBU475-P2 4-3/4" SBU500-P2 5" SBU550-P2 5-1/2" SBU600-P2 6" SBU650-P2 6-1/2" SBU700-P2 7" SBU750-P2 7-1/2" SBU800-P2 8" * Please inquire about domestic and CRSI requirements.
Weight lbs 0.32 0.32 0.33 0.33 0.35 0.35 0.37 0.37 0.39 0.39 0.41 0.41 0.43 0.45 0.45 0.47 0.47 0.49 0.51 0.53 0.55 0.57 0.59
Bundle Qty lf
Continuous High Chair Upper-PLAIN
High Chair OCM Continuous HighContinuous Chair Upper-PLAINPart No. Upper-PLAIN To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity :
Weight
OCM
Bundle Qty
Weight
Part No. PRODUCTS lbs Part No. PRODUCTS lf ORMING FlbsORMING CHCU300-P 0.62
CHCU300-P CHCU350-P CHCU400-P CHCU450-P CHCU500-P CHCU600-P CHCU650-P CHCU700-P CHCU800-P CHCU850-P CHCU900-P
0.62 0.66 0.66 0.70 0.70 0.81 0.87 0.88 0.93 0.99 0.99
50 CHCU350-P 50 CHCU400-P 50 CHCU450-P 50 CHCU500-P 50 CHCU600-P 50 CHCU650-P 50 CHCU700-P 50 To Order (Call, Fax or e-mail CHCU800-P 50 this form) CHCU850-P 50 1. Part No. : CHCU900-P 2. Quantity : 50
0.66
50
50 Continuous High Continuous Chair High0.66 Chair OCM 0.70 50 Part No. 50 Upper-EPOXY 0.70 Upper-EPOXY 0.81 0.87 0.88 0.93 0.99 0.99
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No. CHCU700-E CHCU800-E CHCU900-E
Part No. CHCU700-E CHCU800-E CHCU900-E
lf
50
50 CHC350-E 50 CHC400-E 50 To Order (Call, Fax or e-mail this form) 50 CHC450-E 50 CHC500-E 1. Part No. : 2. Quantity : 50
CHC600-E CHCU700-E CHCU800-E CHCU900-E
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Continuous High Weight Bundle Qty Weight ChairOCM -DIPPED lbs 0.88 0.93 0.98
100
1. Part No. : 2. Quantity :
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Bundle Qty lf 50 50 50 50 50 50 To Order 50 (Call, Fax50 or e-mail this form) 50 1. Part No. : 50 2. Quantity : 50
Continuous High Chair -Dipped To Order (Call, Fax or e-mail this form)
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM
CHCU300-P CHCU350-P 1. Part No. : CHCU400-P 2. Quantity : CHCU450-P Phone : 1-866-457-5710 Fax : 1-847-541-9338 CHCU500-P e-mail : sales@ocm-inc.com CHCU600-P CHCU650-P CHCU700-P CHCU800-P CHCU850-P Bundle Qty lf CHCU900-P 50
Weight lbs 0.62 0.66 0.66 0.70 0.70 0.81 0.87 0.88 0.93 0.99 0.99
To Order (Call, Fax or e-mail this form)
lbs 0.88 0.93 0.98
OCM Bundle Qty Part No. lf CHC350-PD2 50 CHC400-PD2 CHC500-PD2 CHC600-PD2
50
Weight lbs 0.36 0.36 0.39 0.39 0.53 0.880 0.930 0.980
Weight lbs 0.36 0.36 0.39 0.53
Phone : 1-866-457-5710 Fax Bundle : 1-847-541-9338 Qty e-mail : sales@ocm-inc.com lf
50 50 50 50 50 100 100 100
Bundle Qty lf 100 100 100 100
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Bar Supports www.ocm-inc.com
Continuous High Chair -EPOXY
Continuous High Chair -EPOXY OCM nuous High Chair -EPOXY Part No. To Order (Call, Fax or e-mail this form)
CHC350-E CHC400-E Phone : 1-866-457-5710 1. PartFax No. : : 1-847-541-9338 CHC425-E e-mail: : sales@ocm-inc.com 2. Quantity CHC600-E Phone : 1-866-457-5710 Fax : 1-847-541-9338 CHC800-E e-mail : sales@ocm-inc.com 1. Part No. : To Order 2. Quantity : (Call, Fax or e-mail this form)
To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Individual High Chairs Plain OCM OCM Weight Bundle Qty Individual High Chairs Plain Part No. Individual High Chairs Plain Part No. lbs lf
OCM rt No. C350-E C400-E C425-E C600-E C800-E
Weight lbs 0.32 0.34 0.35 0.49 0.90
CHC350-E CHC400-E OCM CHC425-E Part No. Bundle QtyCHC600-E CHC350-E lfCHC400-E CHC800-E 50 CHC425-E 50 CHC600-E 50 CHC800-E 50 50
0.32 Weight0.34 lbs 0.35 0.32 0.49 0.34 0.90
Bundle lf 50 50 50 50 50
0.35 0.49 0.90
FFORMING PRODUCTS ORMING PRODUCTS FORMING PRODUCTS
50 50 Qty 50 50 50
IHC200-P IHC250-P IHC300-P IHC350-P IHC400-P IHC450-P IHC500-P IHC600-P
To Order (Call, Fax or e-mail this form) To Order
1. Part No. : 2. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM OCM Part No. Part No. IHC200-PD Box Qty IHC200-PD IHC250-PD IHC250-PD IHC300-PD IHC300-PD IHC350-PD IHC350-PD IHC400-PD IHC400-PD IHC450-PD 100 IHC450-PD IHC500-PD IHC500-PD IHC600-PD IHC600-PD To Order
IHC200-PD IHC225-PD IHC250-PD 2. Quantity : Phone : 1-866-457-5710 IHC300-PD Fax : 1-847-541-9338 Phone : 1-866-457-5710 e-mail IHC325-PD Fax :: sales@ocm-inc.com 1-847-541-9338 e-mail : sales@ocm-inc.com IHC350-PD IHC400-PD IHC450-PD IHC500-PD Box Qty Box Qty IHC550-PD IHC600-PD (Call, Fax or e-mail this form) 1. Part No. : 2. 1.Quantity Part No. ::
To Order (Call, Fax or e-mail this form)
Weight lbs 0.21 0.21 0.21 0.26 0.26 0.30 0.30 0.30
Weight Weight lbs lbs 0.21 0.21 0.21 0.21 0.21 0.21 0.26 0.26 0.26 0.26 0.30 0.30 0.30 0.30 0.30 0.30
Individual High Chairs EPOXY IHC200-E (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity : Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No. IHC200-E IHC250-E IHC300-E IHC350-E IHC400-E IHC425-E IHC450-E IHC500-E IHC600-E
Weight lbs 0.21 0.21 Weight 0.21 0.26 lbs 0.26 0.21 0.30 0.21 0.30 0.21 0.30 0.26 0.47
To Order (Call, Fax or e-mail this form)
IHC250-E (Call, Fax or e-mail this form) IHC300-E Phone : 1-866-457-5710 Fax : 1-847-541-9338 1. Part No. : IHC350-E e-mail : sales@ocm-inc.com 2. Quantity : IHC400-E Phone : 1-866-457-5710 Fax : 1-847-541-9338 IHC425-E e-mail : sales@ocm-inc.com IHC450-E Box Qty IHC500-E 100 IHC600-E 100 1. Part No. : Order: 2. To Quantity
1. Part IHC450-E No. : 2. Quantity :
IHC500-E
Phone : 1-866-457-5710 IHC600-E Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
OCM Part No.
OCM IHC200-PP Part No.
100 100 100 100 100 100 100 100
lbs 0.21 0.21 0.21 0.21 0.26 0.26 0.26 0.30 0.30 0.30 0.30
Box Qty
To Order 100 (Call, Fax or e-mail 100 this form)
100 100 100 100 Phone : 1-866-457-5710 Fax : 1-847-541-9338 100 e-mail : sales@ocm-inc.com 100 100 100 To Order 100 1. Part No. : 2. Quantity :
0.26 0.30 0.30 0.30 0.47
Weight lbs 0.12
1. Part Box No. : 2. Quantity :
Qty
100
Phone : 1-866-457-5710 100 Fax : 1-847-541-9338 100 e-mail : sales@ocm-inc.com
100 100 100 100 100 100
Box Qty
100100 To 100 Order 100 To Order (Call, Fax or e-mail this form) 100 this form) (Call, Fax or e-mail 100 100No. : 1. Part
Part No. IHC200-PP 100: 1. Part No. 2.: Quantity IHC300-PP 2. Quantity : 100 Phone : 1-866-457-5710 Fax 100 :IHC350-PP 1-847-541-9338 Phone : 1-866-457-5710 e-mail : sales@ocm-inc.com Fax : 1-847-541-9338 100 e-mail : sales@ocm-inc.com IHC400-PP 100
51 Weight lbs
Weight lbs 0.21 0.21 0.21 0.26 0.26 0.30 0.30 0.30 0.47
(Call, Fax or e-mail this form)
100
100 Individual Chair With 100100Plate Individual HighHigh Chair With Plate OCM
dual High Chair With Plate
Box Qty
Individual High Chair With Plate
100 OCM Individual High Chairs EPOXY 100 Part No. Individual High Chairs EPOXY
OCM Part No. Weight IHC200-E Box Qty lbs IHC250-E 0.21 OCM 100 IHC300-E 0.21 Part 100 IHC350-E No. 0.21 IHC200-E 100 IHC400-E 0.26 100 IHC425-E IHC250-E 0.26 100 IHC450-E IHC300-E 0.30 100 IHC500-E IHC350-E 0.30 100 IHC600-E To Order IHC400-E 0.30 (Call, Fax or e-mail this form) 100 0.47 IHC425-E 100
Weight lbs 0.21 0.21 0.21 0.26 0.26 0.30 0.30 0.47
Bundle Qty lf 50 50 50 50 50
Individual High Chairs EPOXY Weight
Individual High Chairs Dipped OCM Individual High Chairs DippedPart No. Individual High Chairs Dipped
OCM Part No. IHC200-PD IHC250-PD IHC300-PD IHC350-PD IHC400-PD IHC450-PD IHC500-PD IHC600-PD
Weight lbs 0.32 0.34 0.35 0.49 0.90
Box Qty
Box Qty 100
Weight lbs 0.12 0.16 0.18 0.20
Box Qty 100 100 100 100
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity :
Bar Supports Individual Bar Chairs EPOXY Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
www.ocm-inc.com
Individual Bar Chairs Plain
Individual Bar Chairs Plain ividual Bar Chairs Plain
OCM Part No. To Order (Call, Fax or e-mail this form) IBC75-P 1. Part No. : IBC100-P 2. Quantity : Phone : 1-866-457-5710 IBC125-P Fax : 1-847-541-9338 To Order (Call, Fax or e-mail this form) 1. Part No. : 2. Quantity :
To Order (Call, Fax or e-mail this form)
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
1. Part No. : 2. Quantity :
To Order To Order (Call, Fax or e-mail this form) (Call, Fax or e-mail this form)
Weight lbs 0.05 Weight0.08 0.09
OCM IBC100-P
1. Part No. : Part No.IBC125-P 2. Quantity :
Box Qty
1. Part No. : 1. Part No. : 100 2. Quantity : 2. Quantity : 100 Box Qty 100Phone : 1-866-457-5710 Phone : 1-866-457-5710 Fax : 1-847-541-9338 Fax : 1-847-541-9338 100 e-mail : sales@ocm-inc.com e-mail : sales@ocm-inc.com
lbs 0.05 0.08 0.09
IBC75-P Box Qty PhoneIBC100-P : 1-866-457-5710 Fax : 1-847-541-9338 100 IBC125-P e-mail : sales@ocm-inc.com 100 100
100 100
IBC125-PD IBC150-PD
Individual Bar Chairs EPOXY Individual Bar Chairs EPOXY OCM ividual Bar Chairs EPOXY Part No. OCM To Order OCM (Call, Fax or e-mail thisPart form)No.
Weight lbs 0.05 0.08 0.09 0.09
IBC75-E IBC100-E IBC125-E IBC150-E IBC175-E
Weight 1. Part No. :Box Qty 1. Part No. : Qty Box lbs 2. Quantity : 2. Quantity : 0.05 100 100 Phone : 1-866-457-5710 Phone : 1-866-457-5710 0.08 100 Fax : 1-847-541-9338 100 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com 0.09 100 e-mail : sales@ocm-inc.com 100 0.09 100 100
Weight lbs 0.05 0.08 0.09 0.09
FORMING PRODUCTS Part No. IBC75-PD IBC75-PD 1. Part No. : Qty Box IBC100-PD 2. Quantity : IBC100-PD IBC125-PD 100 IBC125-PD Phone : 1-866-457-5710 IBC150-PD 100 FaxIBC150-PD : 1-847-541-9338 e-mail : sales@ocm-inc.com 100 100
Footer Chairs
FORMING PRODUCTS Footer Chairs
OCM Part No. IBC75-E IBC100-E IBC125-E IBC150-E IBC175-E
OCM Part No. SBU300-10P SBU300-15P SBU300-20P
To Order (Call, Fax or e-mail this form)
OCM OCM Part No. Part No. IBC75-E IBC75-E Box Qty IBC100-E IBC100-E 100 IBC125-E IBC125-E 100 IBC150-E IBC150-E 100 IBC175-E IBC175-E
Weight lbs 0.05 0.08 0.09 0.09 0.10 Rod Chairs
Weight lbs 0.05 0.08 0.09 0.09 0.10
100 100
Rod Chairs
Weight Box Qty 1.Box Part Qty No. : lbs 2. Quantity : 0.05 100 100 0.08To Order Phone : 1-866-457-5710 100 100 Fax : 1-847-541-9338 0.09(Call, Fax or e-mail this form) 100 100: sales@ocm-inc.com e-mail 0.09 100 1. Part No. : 100 0.10 100 100
To Order (Call, Fax or e-mail this form) 1. Part No. :
FS Stakes OCM Part No. RC2-368 RC3-3516 RC3-3720
OCM Description Part No. SBU300-10P SBU300-15P SBU300-20P
Rod Chair 2 Bar, 3" Height, 6" Bar Spacing, 8"Wide Rod Chair 3 Bar, 3" Height, 5" Bar Spacing, 16" Wide Rod Chair 3 Bar, 3" Height, 7" Bar Spacing, 20" Wide
OCM Part No. RC2-368 RC3-3516 RC3-3720
Weight lbs 0.15 0.48 0.50
0.55 0.74
Weight Box Qty lbs 100 100 0.37 100 0.55 0.74
Description Rod Chair 2 Bar, 3" Height, 6" Bar Spacing, 8"Wide Rod Chair 3 Bar, 3" Height, 5" Bar Spacing, 16" Wide Rod Chair 3 Bar, 3" Height, 7" Bar Spacing, 20" Wide
OCM Part No. FS-3-50 FS-4-50 FS-4-62 FS-4-75 FS-4.5-62 OCM FS-4.5-75 PartFS-5-62 No. FS-5-75
FS-3-50 FS-4-50 FS-4-62 FS-4-75 FS-4.5-62 FS-4.5-75 FS-5-62 FS-5-75
Height 3" 4" 4" 4" 4-1/2" 4-1/2" Height 5" 5"
3" 4" 4" 4" 4-1/2" 4-1/2" 5" 5"
Box Qty 100 100 100 100 Box Qty 100 100 100 100 100
Width
Length
3” 3” 3”
10” 15” 20”
Weight lbs 0.37 0.55 0.74
2. Quantity :
OCM Part No. RC2-368 RC3-3516 RC3-3720 Weight lbs RC3-16WPB 0.37 RC3-20WPB
OCM 2. Quantity : : 1-866-457-5710 Part No.Phone Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com SBU300-10P SBU300-15P SBU300-20P
FS Stakes
100
Phone : 1-866-457-5710 100 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Weight lbs 0.05 0.08 0.09 0.09 0.10
To Order To Order (Call, Fax or e-mail this form) (Call, Fax or e-mail this form)
OCM Part No. IBC75-PD IBC100-PD IBC125-PD IBC150-PD
1. Part No. : 100 2. Quantity :
Weight lbs 0.05 0.08 0.09 0.09
IBC75-PD FS Stakes IBC100-PD
OCM Part No. To Order (Call, Fax or e-mail this form) IBC75-P
Weight lbs 0.05 0.08 0.09
Box Qty
e-mail : sales@ocm-inc.com
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Individual Bar Chairs Dipped Individual Bar Chairs Dipped OCM ividual Bar Chairs Dipped Part No.
OCM Part No. IBC75-P IBC100-P IBC125-P
To Order (Call, Fax or e-mail this form)
Weight lbs 0.05 0.08 0.09
Phone : 1-866-457-5710 Fax : 1-847-541-9338 e-mail : sales@ocm-inc.com
Description
Rod Chair 2 Bar, 3" Height, 6" Bar Spacing, 8"Wide Rod Chair 3 Bar, 3" Height, 5" Bar Spacing, 16" Wide Bundle Rod Qty Chair 3 Bar, 3" Height, 7" Bar Spacing, 20" Wide lf 3 Bar, 3" Height, 5" Bar Spacing, 16" Wide -West Palm Beach Rod Chair To Order (Call, Fax or e-mail3this form) Rod Chair Bar, 3" Height, 7" Bar Spacing, 20" Wide -West Palm Beach
50 1. Part No. : 2. Quantity : Bundle Qty Phone lf : 1-866-457-5710 Fax : 1-847-541-9338 e-mail 50 : sales@ocm-inc.com
OCM Part No. FS-3-50 FS-4-50 FS-4-62 FS-4-75 Weight Box Qty lbs FS-4.5-62 0.15 100 100 0.48 FS-4.5-75 100 0.50 FS-5-62 FS-5-75
Rebar Size 1/2" 1/2" 5/8" 3/4" 5/8" 3/4" Rebar Size 5/8" 3/4"
1/2" 1/2" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4"
52
Weight lbs 0.15 0.48 0.50 0.48 0.50
Height
Rebar Size
3" 4" 4" 4" 4-1/2" 4-1/2" 5" 5"
1/2" 1/2" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4"
Box Qty
100
All Plastic Bar Supports www.ocm-inc.com
53
All Plastic Bar Supports www.ocm-inc.com
54
All Plastic Bar Supports www.ocm-inc.com
55
All Plastic Bar Supports www.ocm-inc.com
OCM Part No. GCCOMP-1.5-2 GCCOMP-2-2.5 GCCOMP-3-3.5 GCCOMP-3.5-4
Weight Per Box 36 39 38 39
56
Box Qty 200 200 200 200
All Plastic Bar Supports www.ocm-inc.com
Plastic Castle Chair
OCM Height Part No. PCC1.5-1.75 1-1/2" - 1-3/4" PCC2-2.25 2" - 2-1/4" PCC3-3.25 3" - 3.25" PCC4-4.25 The OCM Plastic Rebar Saddle is made from heavy duty plastic material. 4" - 4.25"
1/2" & REBAR SADDLES Accessories
Box Qty
100
1/2" & REBAR SADDLES Accessories
on average over 600 lbs at Room Temperature They can fit over #1/2"(#4) vertical *Supports Rebar, and can accommodate 1/2"(#4) rebar in the cradle. *Supports on average over 600 lbs at Room Temperature They are conveniently packaged in shelf ready inner bags of 200 pcs. Concrete Sleeves Description Part# Weight Master box contains 2,000 pcs. The OCM Plastic Rebar Saddle is made from heavy duty plastic material. Hole Outs 3” X 8” Concrete Sleeve (Hole Out) CS3X8 0.26 They Only) can fit over #1/2"(#4) vertical Rebar, and can accommodate 1/2"(#4) rebar in the cradle. (Florida 1/2" REBAR SADDLES 4” Xready 8” Concrete Sleeve (Hole Out) CS4X8 0.38 They are conveniently packaged in shelf inner bags of 200 pcs. Inner Master Size Master box contains Part# Weight 2,000 pcs.
Box Qty 100
1/2" & REBAR SADDLES Accessories
1/2" & REBAR SADDLES Accessories #4 Bar RSADDLE
Bag Quantity 200 pcs
60
Bag Quantity 2,000 pcs
1/2" & REBAR SADDLES Accessories
.90/C
1/2" REBAR The OCM Plastic Rebar Saddle isSADDLES made from heavy duty plastic material.
The OCM Plastic Rebar Saddle is made from duty plastic material. vertical Rebar, and Inner Master They canheavy fit over #1/2"(#4) can accommodate 1/2"(#4) rebar in the cradle. They can fit over #1/2"(#4)Size vertical Rebar, and canPart# accommodate 1/2"(#4)Weight rebar in the cradle. Bag Quantity Bag Quantity They are conveniently packaged in shelf ready inner bags of 200 pcs. They are conveniently packaged in shelf ready inner bags of 200 pcs. The Saddle is made from #4pcs. Bar RSADDLE .90/COCM Plastic Rebar 200 pcs 2,000 pcsheavy duty plastic material. Master box contains 2,000 Master box contains 2,000 pcs. 1/2" REBAR SADDLES Size
Part#
#4 Bar
RSADDLE
Weight .90/C
Size
#4 Bar
1/2" & REBAR SADDLES Accessories
They can fit over #1/2"(#4) vertical Rebar, and can accommodate 1/2"(#4) rebar in the cradle. They are conveniently packaged in shelf ready inner bags of 200 pcs. Master Master box contains 2,000 pcs. 1/2" REBAR SADDLES
1/2" & REBAR SADDLES Accessories
Inner Bag Quantity 200 pcs
Part#
Bag Quantity 2,000 pcs
RSADDLE
The OCM Plastic Rebar Saddle is made from heavy duty plastic material.
They can fit over #1/2"(#4) and can accommodate 1/2"(#4) rebar in the cradle. Inner vertical Rebar,Master Weight They are conveniently packaged shelf ready inner bags of 200 pcs. 1/2" REBARinSADDLES Bag Quantity Bag Quantity Master box contains 2,000 pcs. Inner Master 2,000 pcs Size .90/C Part# 200 pcs Weight
Bag Quantity Bag Quantity The OCM Plastic Rebar Saddle is made from 1/2" heavy duty plastic material. REBAR SADDLES #4 Bar RSADDLE .90/C 200 pcs 2,000 pcs They can fit over #1/2"(#4) vertical Rebar, and can accommodate 1/2"(#4) rebar in the cradle. Inner Master Size Part# Weight Bag Quantity Bag Quantity TheyPacked are conveniently packaged in shelf ready inner bags of 200 pcs. #4 Bar RSADDLEof 200 .90/Cpcs. 200 pcs 2,000 pcs in convenient bags Master box contains 2,000 pcs.
1/2" REBAR SADDLES Packed in convenient bags of 200 pcs. Packed in convenient bags Size
Part#
Weight
#4 Bar
RSADDLE
.90/C
of 200 pcs. Master
Inner Bag Quantity 200 pcs
Bag Quantity 2,000 pcs
Packed in convenient bags of 200 pcs.
Packed in of convenient Packed in convenient bags 200 pcs.bags of 200 pcs. Master Master box contains 2,000 pcs. box contains 2,000 pcs.
Master box contains 2,000 pcs. Special Discount for skid quantities.
Master box contains 2,000 pcs.
Master box 2,000 pcs. Packed in convenient bags ofcontains 200 pcs. Special Discount for skid quantities. Master box contains 2,000 pcs.
Special Discount for skid quantities. Adjustable Plastic OCM For PVC Pipe Special Discount for skid quantities. Screed Chair Part No. Size for 3/4” PVC SpecialSCRCHAIR Discount for skid quantities. 3/4" -
Fits 2" x 4" lumber or 1-1/2" diameter pipe screeds. Includes a base, adjustable ring and a screed receiver. Designed to allow up to +/- 1 inch height adjustment. 1 O.D pvc pipe ( not included) can be cut to any height.
Special box Discount for skid Master contains 2,000quantities. pcs. 57
Carton Qty 250
EURO Rod Products www.ocm-inc.com
58
EURO Rod Products www.ocm-inc.com
Euro Rod
too f rep thgie W sbl 3.3 7.5
doR oruE
OCM Part No. 62ER15 875ER20
htgneL -Hot-Rolled, Bendable, Weldable ez iS MCO '91 '91
hcnI )mm51( "8/5 )mm02( "8/7
.oN traP 51RE26 02RE578
Euro Rod Combo Plate Euro Rod Combo Plate OCM Part No. 62ER15 875ER20
Size Inch 5/8" (15mm) 7/8" (20mm)
Length 19' 19'
Euro Rod Euro Rod Single Wing Nut Single Wing Nut 2&0 3DUW 1R (5&3 (5&3
6L]H ,QFK PP
PP
:DVKHU 6L]H
PP [ PP PP [ PP
:HLJKW SHU SFV OEV
6DIH :RUNLQJ /RDG OEV
6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR
2&0 3DUW 1R (5&3 (5&3
6L]H ,QFK PP
PP
:DVKHU 6L]H PP [ PP PP [ PP
OCM Part No. ERCP15 Weight per foot ERCP20
Size Inch 5/8" (15mm) 7/8" (20mm)
Length
Weight per foot lbs 3.3 5.7
19' 19'
Size Washer Inch Size 5/8" (15mm) 120mm x 120mm 7/8" (20mm) 120mm x 120mm
Weight per pcs lbs 2.78 2.95
Safe Working Load lbs 21,900 39,200
Size Inch 5/8" (15mm) 7/8" (20mm)
Weight per pcs lbs 0.75 2.40
Safe Working Load lbs 21,900 39,200
Weight per pcs lbs 2.38 2.69 2.70 3.10
Safe Working Load lbs 21,900 39,200 21,900 39,200
lbs SWL provides 3.3 a safety factor of apporoximately 2 to 1. 5.7
OCM Part No. ERSWN15 ERSWN20
:HLJKW SHU SFV 6DIH :RUNLQJ /RDG SWL provides a OEV OEV
Dimension (W x H) 90mm x 60mm 90mm x 60mm
safety factor of apporoximately 2 to 1.
6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR
Euro Rod
Euro Rod Round Wing Round Wing Nut
Nut
OCM Part No. ERWN15 ERWN20 62WNERG 87WNERG
Size Inch 5/ 8" (15mm) 7/ 8" (20mm) 5/ 8" (15mm) 7/ 8" (20mm)
Dimension Dia. 100mm 130mm
SWL provides a safety factor of apporoximately 2 to 1.
Euro Rod Hex Couplers
Euro Rod Hex Flange Nuts
Description
OCM Part No.
Weight lbs.
Box Qty
Euro Rod Short (50Mm) Hex Coupling Nut For 5/8� (15Mm) Rod
ERSHC15
0.42
75
Euro Rod Long (100Mm) Hex Coupling Nut For 5/8� (15Mm) Rod
ERLHC15
0.84
40
Description
OCM Part No.
Weight lbs.
Box Qty
Euro Rod Flange Nut With Bottom Flange (25Mm) For 5/8’ (15Mm) Rod
ERFN15
0.26
125
59
EURO Rod Products/ Scaffolding & Shoring Products
www.ocm-inc.com
Euro Rod Round Nuts with Hex End
Description
OCM Part No.
Weight lbs.
Box Qty
Euro Rod Round Nut With Hex End(106Mm) For 5/8” (15Mm) Rod
ERRN15
1.15
25
Description
OCM Part No.
Weight lbs.
Box Qty
Euro Rod Short (75Mm) Shebolt Cone For 5/8” (15Mm) Rod
ERSSC15
0.75
45
Euro Rod Long (100Mm) Shebolt Cone For 5/8” (15Mm) Rod
ERLSC15
1.26
25
Euro Rod She Bolt Cones
Weld Angle Bracket Euro Thread
Pivot Bar Bent Plate
OCM Part No. 62APBP 87APBP AWB24-1 AWB24-1
D Size 5/8" or 15mm 7/8" or 20mm 5/8" or 15mm 7/8" or 20mm
Weight per each lbs 2.15 2.10 1.90 1.90
Safe Working Load lbs 22,400 39,200 9,000 18,000
4x4 Shore Clamp OCM Part No. SCLAMP4x4
4x4 Shore Clamp
4x4 Shore Jack
OCM Part No. SHOREJACK4X4
OCM Part No. OCM-WH
Wire Shore Holder Wire Shore Holder
Reshore Spring Carton Qty 25
OCM Part No. OCM-WH
Weight per pcs lbs 1.65
OCM Part No. OCM - RSS
Reshore Spring
OCM Part No. OCM-WH
OCM Part No. OCM-RSS
OCM Part No. OCM-RSS
Carton Qty 25
Weight per pcs lbs 3.00
Weight per pcs lbs 1.65
Weight per pcs lbs 0.2
Weight per pcs lbs 0.2
60
Weight per pcs lbs 19.00
Carton Qty 25
Weight per pcs lbs 1.65
Weight per pcs lbs 0. 2
EURO Rod Products/ Scaffolding & Shoring Products
SCAFFOLDING/ SHORING PRODUCTS
www.ocm-inc.com
Guard Rail Post Bracket Slab Grabber - Standard Duty - Quick adjust handle and rugged steel construction for fast attachment and a positive grip on the slab
Easily Adjustable. Use fast adjusting handle or nutfor positive socket / wrench adjusting.
- Adjustability for use on up to 36" slabs - Installation requires 20 ft/lbs of torque to secure Slab Grabber to slab edge
Brackets to accept 2 x 4's 2 x 6's cable
- Plate to mount toe board when required or when surface slope is more than 4/12(vertical/horizontal) and if there is a risk of any type of work material to fall to a lower level - Maximum spacing of 8 ft per OSHA spec - Height from top of slab to top of rail is 46"
Plate for attaching toe board.
OCM Part No. OCM-GRP-STD
- Meets all applicable OSHA and ANSI Standards
Description Guard Rail Post Bracket - Standard Duty Primer Painted
Weight lbs 22.00
Skid 200
*WARNING: Rail Post must be secured to deck with proper fasteners to ensure safety. *WARNING: Use of equipment for unintended applications could result in serious injury or death. NEVER make any connections to guardrail system. *WARNING: NEVER lean or climb on guardrail systems.
61
EURO Rod Products/ Scaffolding & Shoring Products
SCAFFOLDING/ SHORING PRODUCTS www.ocm-inc.com
Guard Rail Post Bracket Slab Grabber - Heavy Duty - Quick adjust handle and rugged steel construction for fast attachment and a positive grip on the slab
Top Adjusting Wing Nut
- Bracket preinstalled to mount toe board when required or when surface slope is more than 4/12(vertical/horizontal) and if there is a risk of any type of work material to fall to a lower level
2X4,2X6 or cable ready receivers
52 3/4"
49 1/2"
- Adjustability for use on up to 36" slabs
Toe Board Bracket
- Maximum spacing of 8 ft per OSHA spec - Height from top of slab to top of rail is 46"
Predrilled Holes for Fastening to Deck*
- Meets all applicable OSHA and ANSI Standards
Adjustable Inner Member Extends to 29" OCM Part No. OCM-GRP-HD
Description Guard Rail Post Bracket - Heavy Duty Galvanized
Weight lbs 26.00
*WARNING: Rail Post must be secured to deck with proper fasteners to ensure safety. *WARNING: Use of equipment for unintended applications could result in serious injury or death. NEVER make any connections to guardrail system. *WARNING: NEVER lean or climb on guardrail systems.
62
Skid 200
Precast/Miscellaneous Products www.ocm-inc.com
Types Available: -Coil Loop Inserts and Inserts Ferrule Inserts Coil Coil and Ferrule -Flared Coil Loop Inserts Types Available: -Criss Cross Coil Inserts -Coil Loop Inserts -Thin Slab Lifting Inserts -Flared Coil Loop Inserts -Thin Slab Ferrule Inserts -Criss Cross Coil Inserts -Ferrule Loop Inserts -Thin Slab Lifting Inserts 2&0 ' / -Thin Slab Ferrule Inserts:HLJKW SHU SFV 6DIH :RUNLQJ /RDG Precast Lifting Anchors 3DUW 1R 6L]H /HQJWK OEV OEV -Ferrule Loop Inserts Precast Lifting Anchors 3/$ 3/$ 3/$ 3/$ 3/$
WR
6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR
Lifting Eye
2&0 3DUW 1R 3/$ 75& 3/$ 75& 3/$ 75& 3/$ 75& 3/$ 75& 3/$ 75&
B
L
F
A
C
A
E
6$)( :25. /2$' OE
$
%
LQ
LQ
&
'
(
)
*
LQ
LQ
LQ
LQ
LQ
6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR
Precast Utility Anchors C
Lifting Eye
D
B
/,)7,1* %2'< ,' WRQV 7 7 7 7 7 7
L
Precast Utility Anchors Precast Utility Anchors
2&0 3DUW 1R 8$ 8$ 8$ 8$ 8$ 8$
$
%
0LQLPXP 3DQHO 7KLFNQHVV Â&#x192; Â&#x192;
6DIH :RUNLQJ 7HQVLRQ /RDG Â&#x192; Â&#x192;
6DIH :RUNLQJ 6KHDU /RDG Â&#x192; Â&#x192;
6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR Minimum Panel Thickness B 90° 45° 3-1/8" 4" 3-1/2" 3-3/4" 5" 4-1/4" 4-3/4" Clutch 5-5/8" 4-1/4" 3-3/4" 5" 4-1/4" 4-3/4" 5-5/8" 4-1/4" 6-3/4" 7-5/8" 6"
F
5-1/4" 9-3/8" 7-3/8" 9-1/2" C 7-3/8" 9-3/4"
D
E
D
E
Recess Member
SWL provides a safety factor of apporoximately 4 to 1.
/
:
L
%
&
Safe Working Shear Load 90° 45° 795 2,100 2,825 7,500 2,650 10,000 3,525 12,000 7,075
1,725 2&0 6,750 3DUW 1R 9,000
795 2,100 2,825 2,650 3,525 7,075
1,725 6,750
795 2,100
7,500 10,000 12,000
2,650 3,525 7,075
727$/ /(1*7+ / LQ
% LQ
& LQ
' LQ
( LQ
:(,*+7 ($&+ OE
9,000 2,825 6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR
2&0 5,1* &/87&+ 3DUW 1R 6<67(0 WRQV 50 75 7 50 75 7 7 50 75 7 7 50 75 7 7
&/87&+ ,' 7 7 7 7
/(1*7+ +(,*+7 / + LQ LQ
:,'7+ 6/27 :,'7+ +2/( +2/( ',$0(7(5 :(,*+7 : & ($&+ $ ',67$1&( % LQ LQ LQ LQ OE
+ $
Ring Clutch
Coil Eye Nut Coil: Eye Nut %
B
B 3-1/8" 3-3/4" 4-3/4" 3-3/4" 4-3/4" 6-3/4"
Clutch
A 5-1/4" 9-3/8" 7-3/8" 9-1/2" 7-3/8" 9-3/4"
OCM A Part No. UA4444 5-1/4" 1,125 Minimum Panel Thickness Safe Working Tension Load Safe Working Shear Load 3,000 UA5444 9-3/8" 3-3/4" 5" 4-1/4" 90° 45° 90° 45° 90° 45° 4,000 UA6444 7-3/8" 4-3/4" 5-5/8" 4-1/4" L 4" 3-1/2" UA5671 1,125 795 1,725 795 3,750 9-1/2" 3-3/4" 5" 4-1/4" Recess Member 2,100 6,750 4-1/4" 2,100 5" 4-1/4" UA6671 3,000 5,000 7-3/8" 4-3/4" 5-5/8" 2,825 7-5/8" 9,000 5-5/8" 4-1/4" UA8671 4,000 9-3/4" 6-3/4" 6" 2,825 10,000 3,750 2,650 7,500 2,650 5" 4-1/4" SWL provides a safety factor of apporoximately 4 to 1. 5,000 3,525 10,000 3,525 5-5/8" 4-1/4" 10,000 7,075 12,000 7,075 7-5/8" 6"
C
OCM Part No. UA4444 UA5444 UA6444 UA5671 UA6671 UA8671
Safe Working Tension Load 90° 45° 1,125 795 3,000 2,100 4,000 2,825 3,750 2,650 5,000 3,525 10,000 7,075
5,1* &/87&+ ,' &/87&+ $//2:$%/( 6<67(0 /2$' 5$1*( WRQV SWL provides a safety factor of apporoximately 4 to 1. 2&0)/5& 7 7 7 D E Working Tension Load Minimum Panel Thickness Safe Safe Working Shear Load 7 2&0)/5& 7 7 B 90° 45° 90° 45° 90° 45° 2&0)/5& 7 7 7 3-1/8" 4" 3-1/2"
Ring Clutch B
A
Ring Clutches
OCM Part No. UA4444 UA5444 UA6444 UA5671 UA6671 UA8671
Ring Clutches
H
H & D
Coil Eye Bolt $ D
/
2&0 3DUW 1R &(1 &(1 &(1 &(1
' 6L]H
+ +HLJKW
:HLJKW SHU SFV 6DIH :RUNLQJ /RDG OEV OEV
6:/ SURYLGHV D VDIHW\ IDFWRU RI DSSRUR[LPDWHO\ WR
OCM OCM Part No. + Part No. 50CEB 50CEB 75CEB 75CEB 100CEB 100CEB
Bolt Diameter Bolt Diameter in. in. 1/2 1/2 3/4 3/4 1 1
Safe Working SafeLoad Working Load 2,700 2,700 3,600 3,600 7,200 7,200
SWL provides a safety factor of apporoximately 5 to 1. SWL provides a safety factor of apporoximately 5 to 1.
63
A A in. in. 3 1/4 1/4 3 1/2 35 1/2 5
B B in. in. 1 5/8 5/8 1 3/4 1 3/4 2 2 3/4
C C in. in. 1 1 1 1 1/4 1 1/4
D D in. in. 3/4 3/4 3/4 1 1
E E in. in. 2 2 2 3 3
Miscellaneous Products www.ocm-inc.com
Product Information OCM Mesh Form
OCM Mesh Form (Equivalent to Stay Form) Permanent Stay in Place Concrete Forming System The OCM Mesh Form is made of simple steel form panels that conform easily into multiple configurations to accommodate shapes for keyways or any unusual configurations. The panels can be used to form curves, radiuses or corner bends. They can also be cut to size specifications. One of the innovative features of the OCM Mesh Form is the fact that you can pour one side today and the next side tomorrow. The forms stay in place and area never stripped. This can save the project time and money. It is always an advantage if a trade can start a project and work uninterrupted to the completion of their portion of the project. Applications for the OCM Mesh Form are: Pedestal Foundations; Retaining Walls; Steel Tower Foundations; Wind Force Power Generator Foundations; Underground beams, footings, pressure-proof panels, concrete stoppers, mat foundations and all concrete structures constructed on the ground.
.375”
.234”
Expanded Mesh Between Solid ribs
¾” rib height (8 ribs) OCM Mesh Form Sheet Size Surface Pallet/Ordering V-Ribs 8 per sheet and 3/4" Deep and 3 7/8" on center Tie Wire Spacing Support Spacing(20" high pour) Sheet Thickness Weight Per Sq Ft Weight Per Sheet
27" x 97" 18 Sq Ft/Sheet 250 sheets/4500 Sq Ft per skid; 5 sheets(90 Sq Ft) 6" 24" at 210 psf 26 Ga (0.0217 inch, when Galvanized) 0.66 Lbs. 11.90 lbs per sheet
OCM, Inc. 1215 Henri Drive, Wauconda, IL 60084 Phone: 866-457-5710 Fax: 847-462-4259 E-mail: sales@ocm-inc.com www.ocm-inc.com 64
Miscellaneous Products www.ocm-inc.com
Form Release
OCM Turbo Release $ OLJKW FOHDQ PLQHUDO RLO EDVHG RGRUOHVV FKHPLFDOO\ UHDYWLYH DUFKLWHFWXUDO IRUP UHOHDVH DJHQW 92& FRPSOLDQW DQG IRUPXODWHG IRU XVH RQ D ZLGH YDULHW\ RI IRUPLQJ PDWHULDOV 1RQ VWDLQLQJ *HQHUDO 8VHV &RPPHUFLDO UHVLGHQWLDO FRQFUHWH IRUPLQJ V\VWHPV 3UHFDVW FRQFUHWH &RPPHUFLDO IRUP OLQHUV
2&0 3DUW 1R 2&075 2&075 2&075
%XON *$/ 727( *$/ '580 *$/ 3$,/
OCM Quick Strip $ FOHDQ UHDG\ WR XVH SHWUROHXP EDVHG FKHPLFDOO\ QHXWUDO DUFKLWHFWXUDO FRQFUHWH IRUP UHOHDVH DJHQW 92& FRPSOLDQW ([WHQGV IRUP OLIH DQG LV QRQ VWDLQLQJ *HQHUDO 8VHV &RPPHUFLDO UHVLGHQWLDO FRQFUHWH IRUPLQJ V\VWHPV
2&0 3DUW 1R 2&046 2&046 2&046
%XON *$/ 727( *$/ '580 *$/ 3$,/
65
Miscellaneous Products www.ocm-inc.com
Concrete Tremie Hoppers & Accessories All plastic products are rotational molded and made with industrial grade polyethylene for multiple uses. Hoppers are steel reinforced for added strength during transport and/or positioning at the jobsite. HEAVY DUTY CONCRETE HOPPER
Size 36" x 36"
Discharge 8"-12"
Part# CHHD36-8-12
Weight 18 lb
Ribs on discharge allow the elephant trunk to be attached directly to the PVC hopper.
LIGHT DUTY CONCRETE HOPPER
Size 36" x 36"
Discharge 8"-12"
Part# CHLD36-8-12
Weight 18 lb
Ribs on discharge allow the elephant trunk to be attached directly to the PVC hopper.
Size 8" dia. x 4' tall 12" dia. x 4' tall
PVC TREMIE PIPE Part# CHPIPE-8X4 CHPIPE-12X4
Weight 9 lb 11 lb
METAL ELEPHANT TRUNK COLLAR
Diameter 8" 12"
Part# CHMETC-8 CHMETC-12
STEEL ADJUSTABLE BAND CLAMP
Size Fits 6", 8", 12" Discharge
Weight 4.0 lb 5.0 lb
Part#
Weight
CHSABC-6-8-12
1lb
The steel adjustable band clamp can be used to attach the elephant trunk to the hopper or metal collar. The clamp will fit all discharge sizes (6", 8", 12")
Size 8" x 50' 12" x 50'
PVC ELEPHANT TRUNK Part# CHTRUNK-8 CHTRUNK-12
Weight 44 lb 65 lb
66
FMiscellaneous ORMINGProducts PRODUCTS
www.ocm-inc.com
Masonry Wire/ Ladder Mesh Prefabricated Tees and Corners Ladder Mesh OCM Part No. MWLM-8MG MWLM-8HDG MWLM-12MG MWLM-12HDG
Description 8" MILL GALV X 10'-0" 8" HOT DIP GALV X 10'-0" 12" MILL GALV X 10'-0" 12" HOT DIP GALV X 10'-0"
Qty per Bundle 500 LF 500 LF 500 LF 500 LF
Fabricated Corners OCM Part No. MWLMC-8MG MWLMC-8HDG MWLMC-12MG MWLMC-12HDG
Description 8" MILL GALV CORNER - 32" X 32" 8" HOT DIP GALV CORNER - 32" X 32" 12" MILL GALV CORNER - 32" X 32" 12" HOT DIP GALV CORNER - 32" X 32"
Qty per Bundle 25 25 25 25
Fabricated Tees OCM Part No. MWLMT-8MG MWLMT-8HDG MWLMT-12MG MWLMT-12HDG
67
Description 8" MILL GALV TEE - 32" X 32" 8" HOT DIP GALV TEE - 32" X 32" 12" MILL GALV TEE - 32" X 32" 12" HOT DIP GALV TEE - 32" X 32"
Qty per Bundle 25 25 25 25
Miscellaneous Products www.ocm-inc.com
Ladder Mesh For Single Wythe Block Wall
16" O.C. Cross Rods Allow Core Clearance 10FT Length
Material Conformance ASTM A951/A951M -(Standard Specification for Steel) Wire For Masony Joint Reinforcement ASTM A82/A82M - (Cold Drawn Steel Wire) Tensile Strength - 80,000 psi Yield Point - 70,000 psi Coatings conform to the following specifications: 2
Additional Information Wire Diameter: - 9Gauge (3.7mm) side rods and cross rods. - Cross Rods welded at 16" on center. - First Cross Rods welded 12" in from each end to allow lap spaces per code requirements.
ASTM A641/A641M (0.1 oz/Ft ) for Mill Galvanized coating - Manufactured from a minimum of 95% 2 ASTM A153/A153M-B2 (1.5 oz/Ft ) for Hot-Dip Galvanized recycled material.
68
OS-SPLICE CLIP METHOD www.ocm-inc.com
A new method for joining small diameter reinforcing bars. May be used in splicing tension bars, column ties, and stirrups.
Installation Tool
Studies of recent earthquakes in both Japan and the United States made by the Architectural Institute of Japan have indicated the advisability of using continuous tie bars in columns. This may be accomplished through the use of continuous spiral ties or by connecting the ends of square column ties. The OS Splice Clip provides a cold method for making tie connections which will exceed the yield strength of the bars and will not alter the metallurgical properties of the steel. Under extreme compressive loads such as those experienced in columns under earthquake loading, continuous ties help restrain the concrete within the interior of the column.
Feature • Can be used in Tension and Compression Zone • It is an industrial method with high reliability of joint. • Shear reinforcement can be applied to to main rebar. • Installation tool is portable and compact. •E lectric Installation Tool is easy to use, and does not require Hydraulic Power Pack. • Anyone can construct it easily. • Weather does not effect installation.
Performance A reliable Connection is secured, Exceeding 135% of actual yield of the steel.
69
OS-SPLICE CLIP METHOD www.ocm-inc.com
Installation jR einforcing bars are set on the sleeve, and the machine with the pressure which a wedge was set on is given to joint part.
k The one with the pressure is done until the rest head of the wedge is less than 3mm.
Installation tool
Bar Size
Type Total length Maximum pressure
# 3 – # 4
Battery–Type Plug–Type
# 5 – # 6
Battery–Type Plug–Type
#7–#8
Plug–Type
495 mm
620 mm
658 mm
8 ton
12 ton
18 ton
70
Special Order Products www.ocm-inc.com
Manufactured To Your Specifications Solid & Hollow Screw Jacks • Scaffolding Accessories Castings • Forgings • Metal Stamping Welded Wire Products • Custom Parts
• Product Knowledge • Manufacturing Experience • Custom Parts & Specialty Items • Direct Ship to Third Party • Tracking Shipments
• Stock & Release Programs • Quality Assurance Performed In House • Customer Packaging • Inventory Financing
Our goal is to provide great customer service, quality products and very competitive pricing. Please contact us with any inquiries regarding current products, specialty items or large volume quotes. We will try to meet and exceed any challenge you p rovide us with.
71
OCM Worldwide
◆ OCM's manufacturing, strategic alliances, distribution and divisional locations worldwide. A GLOBAL LEADER IN METAL WORKING OCM, Inc. is a subsidiary of OKABE Co., LTD. OKABE was founded in 1917 in Japan and has been a full service manufacturer and distributor of concrete construction supplies, and a world leader in the Metal Forming Industry for over eighty years. Through capital investment and strategic partnerships, Okabe has achieved sales of over one billion dollars and employs over 1,500 people worldwide. OKABE uses a broad range of metal forming technologies to provide a diverse selection of engineered fasteners and components. OKABE Markets Include: Construction Industry, Concrete Forming Accessories, Waterstop Products, Scaffolding & Shoring Components, Rebar Splicing, Transportation Industry, Heavy and Medium Duty Truck O.E.M.’s, Light & Heavy Duty Trailer O.E.M.’s, Heavy Duty Truck and Trailer Aftermarkets, Automotive & Light Truck O.E.M.’s, Axle & Suspension O.E.M.’s, Wheel, Hub & Drum O.E.M.’s, Agricultural & Construction Machinery O.E.M.’s, & Civilian & Military Marine & Shipbuilding Industries. OCM’s worldwide manufacturing base coupled with a North American distribution network provides our customers with sophisticated design support, engineered quality and globally competitive products. OCM’s global quality policy is one of continuous education, statistical analysis and evaluation of our systems, processes and techniques. We are dedicated to provide the highest quality products, at a competitive price, through innovation and technical expertise and the utmost in customer care. We invite you to visit our website www.ocm-inc.com or contact our sales department at 1-866-457-5710 with your product questions. OCM, Inc. 1215 Henri Drive, Wauconda, IL 60084 Telephone: 866-457-5710 • Fax: 847-462-4259 www.ocm-inc.com Stocking Locations: Denver 4120 York St. Denver, CO 80216
Atlanta 605 Wesleyan Drive SW Atlanta, GA 30336
Dallas 11625 Columbia Center Dallas, TX 75229
Portland 1525 SE 10th Ave. Portland, OR 97214
Houston 5615 Armour Drive Houston, TX 77020
Northern California 814 Striker Ave. Suite B Sacramento, CA 95834
Southern California 2342 E. Valencia Dr. Fullerton, CA 92831
New Orleans 1125 Barataria Houma, LA 70360
New Jersey 192 Clifford St. Newark, NJ 07105
Ft. Lauderdale 200 S.W. 12th Avenue Pompano Beach, FL 33069