RAMCRETE PRODUCT APPLICATIONS
PRODUCT FEATURES
HIGHLIGHTS
• Brighten and restore old concrete structures. • Rub concrete columns and structures. • Repair voids, honeycombs, holes, chipped areas in poured or precast concrete. • Fill cracks and holes in concrete, masonry, plaster, stucco, sheetrock and wood. • Use RAMCRETE to repair concrete, facings, walls, ceilings, beams and bridge abutments. • Use Pure RAMCRETE for smooth applications up to 1/8” thickness. • Use Sand Mix RAMCRETE for coarser texture finish and applications up to 1/4”. • Use White RAMCRETE for a white finish or with integral color or stain for brighter colors.
• Featheredges to paper thin. • Color controlled to blend with concrete. • Add only water. • Cures like regular concrete. • Not a gypsum product. • Low shrinkage. • Water resistant. • Extra rich for easy installation. • Holds moisture while spreading or rubbing. • LEED Credits Applicable. • Anchors by Expansion • Meets ASTM 1107 Grade C • Meets CRD 621
• FOR RUBBING, SMOOTHING, RESTORATION, RESURFACING, REPAIRING • Dual Bonding Action • Easy to Use • Extra rich for smooth, easy troweling • Holds moisture while spreading or rubbing
PRODUCT APPLICATIONS
PRODUCT FEATURES
HIGHLIGHTS
RAM-ROCK is a scientifically formulated non-metallic pourable anchoring cement and grout. It is rapid setting and expansive. RAM-ROCK is a non-shrink hydraulic cement with controlled expansion. It will self-level when mixed with water to a pourable consistency. RAM-ROCK is non-rusting and contains no ferrous metals. Its controlled expansion grips the material to be anchored, locking it into place. RAM-ROCK may be used to anchor bolts, equipment, machinery, railing, reinforcing rod, signs, posts, etc. It may be used to grout columns, machinery, bearing plates and precast members. RAM-ROCK meets ASTM C-1107 Grade C.
• Fast Setting • Non-Shrink • Non-Metallic • Self-Leveling when Mixing to Pourable Consistency • Controlled Expansion • High Compressive Strength • High Pullout Strength • Anchors by Expansion • Meets ASTM 1107 Grade C • Meets CRD 621
• ANCHORING CEMENT • NON SHRINK GROUT • Over 5,000 PSI in 1 hour • Over 10,000 PSI in a day • Over 35,000 PSI pullout strength
RAM-ROCK
RAMPATCH / RAMPATCH ACRYLIC PRODUCT APPLICATIONS
PRODUCT FEATURES
HIGHLIGHTS
RAMPATCH is designed to be used both as a topping or underlayment and as a wall, floor, and overhead patching and repair material when mixed to a stiffer consistency. For use as an underlayment, mix to the consistency of a thick pancake batter. Use RAMPATCH to level and smooth rough or rained on concrete. RAMPATCH may be used to level low areas inside or outside. It will bond to and may be used to level virtually any concrete surface. Mixed as a repair material, RAMPATCH may be used to repair walls, floors, tilt panels, driveways, sidewalks, precast members, etc. RAMPATCH may be applied from featheredge to 2-1/2 inches. Suitable for interior or exterior applications. Suitable for application where there is rubber tired forklift and vehicle traffic.
• Outstanding Bonding • Improved Water Resistance • Interior or Exterior Use • From Featheredge to 2-1/2 inches • May Be Used as Screedable Underlayment • May Be Used as a Trowelable Repair Material • Improved Compressive Strength • No Moist Curing Required • High Solids Acrylic Polymer • May Be Stained or Used With Integral Color • May Be Used for Stenciled and Decorative Concrete • LEED Credits Applicable
• TWO COMPONENT • ACRYLIC POLYMER MODIFIED TOPPING AND UNDERLAYMENT • OVERHEAD AND WALL REPAIRS • Bonds to Virtually Any Concrete Surface • Light Gray to Blend with Existing Concrete • Improved Bond and Compressive Strength
RAMSTRUCTURAL PRODUCT APPLICATIONS RAM STRUCTURAL is a fast-setting trowel grade repair material for horizontal application. It may be used to repair parking decks, bridge structures, pier and deck supports, water and sewage treatment plants, factory and warehouse floors, manholes, for concrete topping and other similar applications. Use RAM STRUCTURAL when the repair must be ready for service in 8 hours. Use in cold weather, down to 32OF. It may be used for interior or exterior repairs, above or below grade. RAM STRUCTURAL may be used from 1/2” to 6”. Suitable for applications with vehicle and forklift traffic.
PRODUCT FEATURES • High Early Strength • Ready for Service in 8 Hours • Apply from 1/2” to 6” • Use Down to 32°F • High Compressive and Flexural Strength • Outstanding Bonding • Wearing Surface • Interior or Exterior Use, Above or Below Grade • Can be Mixed with Integral Color
HIGHLIGHTS • SINGLE COMPONENT • STRUCTURAL REPAIR MATERIAL • Use down to 32°F • Rapid Setting Topping • 8900 PSI Compressive Strength • Ready for Service in 8 Hours
RAM-PRIMER PRODUCT APPLICATIONS
PRODUCT FEATURES
HIGHLIGHTS
Use RAM-PRIMER as a primer for RAMPATCH and RAM STRUCTURAL. It is used as a surface bonder to bond fresh cementitious materials such as concrete, stucco, gypsum, plaster, etc. to various surfaces including concrete, masonry, stone, brick, plaster or wood. RAM-PRIMER may be used inside or outside. It may be used as an integral polymer modifier for cementitious materials. RAM-PRIMER increases the bond strength and water resistance of cementitious mortars. Use RAM-PRIMER in the repair of concrete, plastered ceilings and walls and stucco surfaces.
• VOC Compliant • High Solids Copolymer Emulsion • Not Moisture Sensitive After Use • Inside or Outside Use • Reemulsifiable, One Time Only • Use as a Surface Bonder • Use as Integral Polymer Modifier for Cement Mortars • Use as Primer For RAMPATCH and RAM STRUCTURAL • Improved Strength as a Polymer Modifier • Not a PVA
• PRIMER AND SURFACE BONDING • BONDING ADMIXTURE • VOC COMPLIANT • Bond New Concrete to Old • Reemulsifiable, One Time Only • Primer for RAMPATCH and RAM STRUCTURAL