Products and Solutions for Water/Wastewater Facilities
Mechanical Anchors High-Strength Adhesives Composite Strengthening Systems™ and Crack Repair
Products and Solutions for Water/Wastewater Facilities
Mechanical Anchors Stainless-Steel Titen HD® Screw Anchor The ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance for unsurpassed peace of mind. •• Available in both Type 316 and Type 304 stainless steel •• For use in cracked and uncracked concrete and masonry •• For use in exterior and most corrosive environments •• Available in 3/8", 1/2", 5/8" and 3/4" diameters and multiple lengths (3" to 8 1/2") •• Innovative serrated carbon-steel threads at the tip for unsurpassed cutting ability, minimizing potential corrosion damage to the concrete or masonry
Type
304
Installation of stainless-steel Titen HD screw anchor.
Anchoring Adhesives Cracked
Concrete CODE LISTED
High-Strength Epoxy Adhesive •• For threaded rod and rebar •• Install in dry, water-saturated or water-filled holes in base materials with temperatures between 40°F and 100°F •• NSF/ANSI standard 61 approved
SET-XP®
Cracked
Concrete CODE LISTED
High-Strength Epoxy Adhesive •• For threaded rod and rebar •• AC308 qualified for rebar doweling to achieve rebar yield, development length and lap splices •• NSF/ANSI standard 61 approved
AT-XP®
Cracked
Concrete CODE LISTED
High-Strength, Fast-Cure, All-Weather Acrylic Adhesive •• For threaded rod and rebar •• Can be used in cold temperatures as low as 14°F •• NSF/ANSI standard 61 approved
Speed Clean™ DXS Dust Extraction System Save time and money by drilling faster and cleaner. “Drill and Fill” while complying with OSHA silica-dust regulations. •• Drills holes 20% faster than standard bits •• Eliminates “blow-brush-blow” cleaning — greatly reducing dust and cutting installation time by up to 50%
The Speed Clean DXS dust extraction system is a drilling system that reduces health risks from airborne silica dust caused by the hole-drilling and cleaning processes. The Speed Clean DXS system simultaneously drills and cleans holes using a hollowcentered bit for rebar doweling or anchoring threaded rod and is code listed for use with Simpson Strong-Tie® AT-XP, SET-XP and SET-3G. For more information on the OSHA silica-dust regulation: go.strongtie.com/oshasilica. 2
© 2018 Simpson Strong-Tie Company Inc. S-A-WWT18
SET-3G™
Products and Solutions for Water/Wastewater Facilities
Composite Strengthening Systems™ Simpson Strong-Tie® Composite Strengthening Systems (CSS) provide efficient solutions to strengthen and extend the life of critical water treatment, storage and delivery infrastructure.
Concrete Tank Repair
Fiber-Reinforced Polymer (FRP) For the structural reinforcement of concrete and masonry elements, we provide corrosion-resistant and high-performance product solutions including code-listed and NSF/ANSI 61-listed carbon and glass fabrics, precured laminates, epoxy paste and filler, epoxy primer and saturants and FRP anchors. A line of performance coatings is available to provide protection of the repair and surrounding surfaces.
Concrete Pipe Repair
Fabric-Reinforced Cementitious Matrix (FRCM) Combines high-performance sprayable mortar with a carbon-fiber grid to create thin-walled, reinforced concrete shells without adding significant weight or mass to the structure. It may be used to repair deterioration or damage, strengthen and protect all in one application. Achieve minimal capacity loss of concrete tanks and pipes with as little as 1" material thickness. FRCM is more abrasion resistant than concrete and is corrosion resistant.
Crack Repair
© 2018 Simpson Strong-Tie Company Inc. S-A-WWT18
ETI Injection Epoxy
Concrete Repair
ETI injection epoxies are two-component, highsolids formulations for injection into cracks in concrete. Dispensed through a static mixing nozzle using either a manual, battery-powered or pneumatic dispensing tool, these epoxies provide a waterproof, high-strength structural repair. Available in three viscosities for cracks ranging from 0.002" to 1/4". ETI-LV is NSF/ANSI 61 approved.
Crack-Pac® Flex-H2O™ Polyurethane Crack Sealer The Crack-Pac Flex-H2O polyurethane injection resin seals leaking cracks, voids or fractures from 1⁄32" to 1/4" wide in concrete or solid masonry. Designed to perform in applications where water is seeping or mildly leaking from the crack, the polyurethane is packaged in the cartridge and an accelerator is packaged in the nozzle. When the resin encounters water as it is injected into the crack, it becomes an expanding foam that provides a flexible seal in leaking and non-leaking cracks. 3
Products and Solutions for Water/Wastewater Facilities
From Service to Software, We Simplify Your Job
A Legacy of Service and Support Simpson Strong-Tie prides itself on delivering a knowledgeable team of sales and engineering experts that our customers have trusted for over 60 years. On the phone, online or on your jobsite, our people are always there to help your projects run smoother, faster and smarter.
Everywhere You Are with the Products and Training You Need Maple Ridge, BC Kent, WA
Eagan, MN
Brampton, ON Enfield, CT
West Chicago, IL Columbus, OH
Stockton, CA Pleasanton, CA
Jessup, MD
Kansas City, KS
Honolulu, HI
High Point, NC
Gallatin, TN
Riverside, CA Chandler, AZ McKinney, TX Houston, TX
Jacksonville, FL
As a leader in innovation, research and testing, Simpson Strong-Tie is one of North America’s largest suppliers of structural building products. With facilities from coast to coast and a distribution network that’s second to none, we can have any product on your jobsite exactly when you need it. And our extensive network of onsite training centers and remote workshops ensure that you’ll have the knowledge you’ll need to get the job done right.
No-Cost Engineering and Technical Services Our experienced technical representatives and licensed professional engineers provide complimentary CSS design services and field support — serving as your partner during the entire project cycle. Our pledge is to address your specific condition with a complete strengthening plan tailored to your needs, minimizing downtime or loss of use, at the lowest possible installed cost. Our Complimentary CSS Engineering and Technical Services Include: •• Budget estimates •• Feasibility study •• Complete engineering package including a detailed material takeoff
•• Calculations provided for Engineer of Record reference during submittal review •• Signed and sealed calculations and shop drawings for all 50 states and throughout Canada
•• Specifications prepared to your unique project requirements
Anchor Solutions and Web Apps •• Rebar Development Length Calculator strongtie.com/webapps/rebardevelopmentlengthcalculator •• Adhesive Cartridge Estimator strongtie.com/products/anchorsystems/software/adhesive_est_calc •• Anchor Designer™ Software strongtie.com/anchordesigner
This flier is effective until December 31, 2020, and reflects information available as of October 1, 2018. This information is updated periodically and should not be relied upon after December 31, 2020. Contact Simpson Strong‑Tie for current information and limited warranty or see strongtie.com. © 2018 Simpson Strong‑Tie Company Inc. • P.O. Box 10789, Pleasanton, CA 94588
(800) 999-5099 strongtie.com S-A-WWT18 10/18 exp. 12/20