Retractable Cone Bar™ Improve Pedestrian Safety with Retractable Cone Bar™
Stock# 150610A-CBOW
Grabber Tube® II with 12# Recycled Rubber Base
Create a pedestrian barrier with Grabber Tubes and Retractable Cone Bars
Stock# 15046A-CBYB
Enviro-Cone™, 7#
• Retractable bar provides visual barrier to pedestrians • Rugged 3.25” loop easily drops over traffic cones or delineator posts • Made of durable ABS plastic • Reflective sheeting applied to bar for nightime visibility • Ideal for use as a visual and physical barrier around industrial work sites Retractable Cone Bars Stock #
Description
Reflective
15046A-CBYB
4’ long telescoping to 6.5’
Yellow/Black
150610A-CBOW
5.5’ long telescoping to 10.5’
Orange/White
Use Retractable Cone Bar in combination with any cone or delineator to provide a visible barrier 160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663
FAX (949) 361-9205
www.traffixdevices.com 08152013
www.traffixdevices.com
TrafFix D e l in ine e at o r Tubes Grabber-Tube®
Grabber-Tube® II
Looper-Tube®
42”
42” + colors
42” & 28” 28”
Prime choices beyond compare! • • • • • Recycled Rubber Bases Tube Bases are made from 100% recycled rubber in 8, 12 & 18 lb. weights. Each base has a convenient carrying handle and built in stacking ring to help keep bases together during transport to and from the job site.
• • • •
160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663
FAX (949) 361-9205
www.traffixdevices.com 01212015
•
Unparelleled durability in all weather conditions NCHRP350 Compliant Manufactured from durable low density polyethylene material with UV inhibitors to minimize fading Available with 8, 12 or 18 lb. recycled rubber base Handles allow for easy movement and can accomodate caution tape, flag line or rope Two or three recessed areas on stem can accomodate various sheeting patterns Protective ribs keep reflective sheeting looking crisp and new Ideal for construction work zones, airports, parking lots and job sites of all kinds High fluourscent orange in color, also available in yellow, black and white in Looper Tube Extra large bottom flange stem holds the base and tube firmly into place with no pull through
www.traffixdevices.com
PRODUCT
BULLETIN
TrafFix 17” LED Baton
Features:
• Water resistant and shock resistant • Flash, steady burn and flashlight mode • Non-slip textured grip • Audible siren • Molded-In belt clip • Magnetic base and lanyard • Powered by 3 AA batteries (not included) • Run time: 90 - 100 hours • Weighs only 13 oz. • Available in blue, green or red
(blue) # SPB-17B-FA / (green) # SPB-17G-FA / (red) # SPB-17R-FA 160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663 FAX (949) 361-9205 www.traffixdevices.com 02132015
www.traffixdevices.com
URETHANE BASE and Post Designed and Tested to 100 Impacts at 60 mph
ABS BASE and Posts Designed and Tested to 50 Impacts at 35 mph
PRODUCT
BULLETIN
™
19700B BASE POST: 19113-ORF3-HIBWH
160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663 FAX (949) 361-9205 www.traffixdevices.com 11.18.16
Urethane Base w/ 2.2” x 36” round orange tube w/ flattened top. 3 x 9” vertical white reflective
19300B BASE
19300B BASE
POST: 19023-ORB3-HIWH
POST:19013-WHAZHIWH
ABS Base w/ 3” x 36” orange round tube + 2 ea 3” white reflective bands
www.traffixdevices.com
ABS Base w/ 2” x 28” white round tube. 3” wide white reflective band
19500B BASE POST: 19113-YEL2HIBWH
ABS Base w/yellow cloverleaf 28” post. 3” x 9” vertical white reflective
PRODUCT
BULLETIN
™
Roof Edge Delineator Cone for Roof Warning Line Systems DESIGNED TO MEET OSHA 1926.502 (39” OSHA Maximum Tie-Off Height)
• Warning line system providing quick set-up and removal. • 30 lb. Recycled Rubber Base weight stays in place. Won’t damage the roof. • Durable Low Density Plastic Delineator Cones stack with or without base. • Base drops over cone for easy set-up, bases stack for easy transport & storage. • Meets OSHA Regulation 16 lb. pull test. • Available with or without Reflective Sheeting. • Another high quality product from TrafFix Devices, Inc. OSHA1926.502 Compliance 47039-CRU-30 Complete Unit, Cone & Base
www.traffixdevices.com
™
Roof Edge Delineator™
Drop over base for easy set-up
OSHA Regulations Standard #:1926.502(f) Warning Line Systems 1926.502(f)(2) Warning lines shall consist of ropes, wires, or chains, and supporting stanchions erected as follows: OSHA Recommedation: A warning line is used 6-15 feet from the edge of the roof, dependaing on the slope. The warning line meets or exceeds the requirements in 1926.502(f)(2). 1926.502(f)(2)(i) The rope, wire, or chain shall be flagged at not more than 6-foot (1.8 m) intervals with high-visibility material; Manufacturers Recommendation: Spacing between the roof edge delineators to be 6’ - 10’. 1926.502(f)(2)(ii) The rope, wire, or chain shall be rigged and supported in such a way that its lowest point (including sag) is no less than 34 inches (.9 m) from the walking/working surface and its highest point is no more than 39 inches (1.0 m) from the walking/working surface; 1926.502(f)(2)(iii) After being erected, with the rope, wire, or chain attached, stanchions shall be capable of resisting, without tipping over, a force of at least 16 pounds (71 N) applied horizontally against the stanchion, 30 inches (.8 m) above the walking/working surface, perpendicular to the warning line, and in the direction of the floor, roof, or platform edge; 1926.502(f)(2)(iv) The rope, wire, or chain shall have a minimum tensile strength of 500 pounds (2.22 kN), and after being attached to the stanchions, shall be capable of supporting, without breaking, the loads applied to the stanchions as prescribed in paragraph (f)(2)(iii) of this section; and 1926.502(f)(2)(v) The line shall be attached at each stanchion in such a way that pulling on one section of the line between stanchions will not result in slack being taken up in adjacent sections before the stanchion tips over. 1926.502(f)(3) No employee shall be allowed in the area between a roof edge and a warning line unless the employee is performing roofing work in that area. 1926.502(f)(4) Mechanical equipment on roofs shall be used or stored only in areas where employees are protected by a warning line system, guardrail system, or personal fall arrest system.
Distributed by:
160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663 FAX (949) 361-9205 www.traffixdevices.com PB112116
PRODUCT
BULLETIN
MASH Tested, Passed and Eligible TL-1 and TL-2
45332-MO
45332-MW
• TrafFix Water-Cable Barrier has been MASH Tested, Passed and Eligible at TL-1 31 mph (50 km/hr) and TL-2 43.5 mph (70 km/hr) levels. • Molded in galvanized steel cables (3) strengthens water-cable barrier to resist vehicle penetration during an impact. • Double wall knuckle design minimizes breakage at hinge points. • Durable polyethylene plastic with ultra violet additives resist fading, cracking and breaking. • Hinge design allows for a 30-degree pivot between sections. • Large 8” fill hole speeds filling process, includes twist-lock plastic cap. • Tamper resistant drain plug with coarse buttress thread eliminates cross threading and quickly screws in or out in only 2 1/2 turns. • Includes one steel connection pin that allows sections to be linked together. • Forklift / pallet jack slots for easy movement and placement. • Standard colors are orange/red or white - additional colors available upon request.
www.traffixdevices.com
TrafFix Water-Cable Barrier™ Specification
Water-Cable Barrier to be 72” (1.9 m) long x 18” (0.46 m) wide x 32” (0.8 m) tall and molded from polyethylene. WaterCable Barrier to be MASH tested, passed and eligible for TL-1 31 mph (50 km/hr) and TL-2 43.5 mph (70 km/hr) barrier applications. Individual wall shall weigh 100 lbs (45.4 kg) including internal cables empty and 1,070 lbs. (485.3 kg) when filled. Three 3/8” diameter stranded steel cables are molded into the wall to contain the impacting vehicle during an accident. Standard colors are orange/red and white, product may also be produced in other colors. Water-Cable Barrier modules are connected together with galvanized steel T-pins passing through a double wall knuckle which minimizes breakage at hinge points. Water-Cable Barrier shall pivot up to 30 degrees when connected. Water-Cable Barrier to have one 8 in (203 mm) diameter fill hole for quick filling and a twist lock cap for closure. Water-Cable Barrier will have molded fork lift slots to provide easy movement. Drain plug to be centered on the modules to protect against cracking or breaking and have course buttress threads for quick removal and insertion. Water-Cable Barriers shall stack for easy movement and storage. 72" [1.9m]
8" [0.2m] QUICK FILL HOLE
GALVANIZED STEEL CONNECTION PIN
MASH TL-1 AND TL-2 BARRIER
Water-Cable Barrier stacks for storage and transportation FORK LIFT SLOTS
Large 8’ fill hole speeds filing process, includes twist-lock plastic cap
32 3/8" [0.8m]
MOLDED IN BUTTRESS THREAD DRAIN HOLE
MASH & NCHRP 350 Eligibility Letters: MASH Eligible TL-1 Longitudinal Barrier - B-271 MASH Eligible TL-2 Longitudinal Barrier - B-272 NCHRP 350 Eligible TL-1 Barrier - B-130 NCHRP 350 Eligible TL-3 Barricade - WZ-224
Specifications Water-Cable Barrier can be easily lifted and placed using a forklift or pallet jack Tamper resistant, offset drain plug with coarse buttress thread
Water-Cable Barrier can pivot 30-degrees and be locked together with steel connection pins
Length
72” (1.9m)
Width
18” (0.46m)
Height
32” (0.8m)
Weight (Empty)
100 lbs. (45.4 kg)
Weight (Filled with water)
1,070 lbs. (485.3 kg)
Material
Polyethylene Plastic
Color
Orange/Red or White
Distributed by:
160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663 FAX (949) 361-9205 www.traffixdevices.com PB022817
WWF Water-Wall Fence™
• Keep an area or construction zone secure with the new Water-Wall Fence™ by TrafFix Devices, Inc. • Easily retrofits to the TrafFix Water-Wall to create an imposing and secure barrier to unwanted entries. • Water Wall Fence is made of 11 gauge galvanized steel mesh providing security and visibility. • Fence sections interlink with TrafFix Water-Wall to provide better overall stability and allows for changes in ground height. • TrafFix Water-Wall and WWF can rotate up to 30° for easy layout and encircling of job sites. • Additional hole provided at the upper end of T-Pin for security bolt to enhance security. • No need to remove fence to fill TrafFix Water-Wall. Fill caps are easily accessible with fence installed. • 6’ Single or 12’ Double Gate provides a secure entrance for workers or work vehicles.
www.traffixdevices.com
WWF Water-Wall Fence™
Water-Wall Fence™
Ideal for vertical construction. Secure and easy to deploy.
Specifications The chain link fence will attach to the top of a longitudinal barrier, (TrafFix Water-Wall™), creating additional security to a work zone. The mesh fence will be made of 11 gauge steel, connected to vertical steel posts of 1 5/8” diameter. Fence sections will be 6’ wide x 4’ tall. Each fence section shall weigh no more than 42 lbs including the connector T-pin. Each T-pin will extend down through the sections of fence into the knuckles of the TrafFix Water-Wall to securely connect the fence to the wall. Each T-pin shall have a hole at the upper end for a security bolt to enhance security. The fence will accommodate a 6’ single gate or a 12’ double gate for entrance or exit from the work zone. For maximum stability, the TrafFix Water-Wall, filled with water will weigh 1,110 pounds. Overall height of the Water-Wall Fence attached to the top of the TrafFix Water-Wall will be a minimum 84”.
Water-Wall Fence Rotates up to 30° Degrees
Description D
Stock #
Dimensions
W WW Fence Panels
45032-WWF
4’ Tall x 6’ Wide
6’ Single Gate (includes two 6
45032-WWF-GATE6
6’ Tall x 6’ Wide
12’ 1 Dual Gate (includes two G Gate Attachment Frames)
45032-WWF-GATE12
6’ x 12’ Wide
Gate Attachment Frame
45032-WWF-GATT
G Gate Attachment Frames)
Secure entry with a 6’ Single Gate
T-Pin Connects Wall to Wall and Fence to Fence
T-Pin with Keeper Pin
45032-WWF-CP
6’ Length
Water-Wall (White)
45032-W
72” Length x 32” Tall
Water-Wall (Orange)
45032-O
72” Length x 32” Tall
Fence can be Screened for Greater Security
Distributed by:
160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663 FAX (949) 361-9205 www.traffixdevices.com PB1013
Water-Wall Water-Filled Barrier
™
FHWA NCHRP-350, TL-1 Tested and Passed
• Tested and passed, NCHRP-350 TL-1 Barrier Wall Wall, TL-2 Longitudinal Channelizing Device and TL-3 Barricade • 32” tall x 72” long. Low profile allows motorists in all vehicle types to view oncoming traffic at intersections. • Durable linear low density polyethylene plastic minimizes cracking and breaking. • Double wall knuckle design minimizes breakage and creates a strong connection at hinge points. • Hinge design allows for a 30-degree pivot between sections. • Large 8” fill hole speeds filling process, includes twist-lock plastic cap. • Tamper resistant, offset drain plug with coarse buttress thread - screws in or out in only 2.5 turns. • Includes one steel connection pin and keeper pin per wall to allow sections to be locked together. • Forklift and pallet jack slots are molded in for easy movement. • Standard colors are orange/red or white - additional colors available upon request. • Accepts the Water-Wall chain link fence for additional job site security.
www.traffixdevices.com
Water-Wall®
30-degree pivoting hinge design allows the TrafFix Water-Wall to handle curved roads
Specification Water-Wall barrier to be 72” long x 32” tall x 18” wide and molded from linear low density polyethylene. Water-Wall to be NCHRP-350 TL-1 tested and passed as a barrier. Individual wall shall weigh 80 lbs. empty and 1,110 lbs. filled. Standard colors are white or orange. Water-Wall sections are connected together with galvanized steel T-pins passing through a double wall knuckle which minimizes breakage at hinge points. Wall shall pivot up to 30 degrees when connected. Water-Wall to have one 8” diameter fill hole for quick fill and a twist lock cap for closure. Water-Wall will have molded thru holes to provide easy movement. Drain plug to be offset to protect against cracking or breaking and have course buttress threads for quick removal and attachment. Water-Walls shall stack for easy movement and storage.
Water-Wall stacks for storage and transportation
Water-Wall Fence can be easily attached to WaterWall for additional job-site security.
NCHRP 350 Approved As: TL-1 Longitudinal Barrier - HSA-10/B-130 TL-2 Longitudinal Channelizing Device - HSA-10/WZ-224 Large 8’ fill hole speeds filing process, includes twist-lock plastic cap Water-Wall can be easily lifted and placed using a forklift or pallet jack
Water-Wall can pivot 30-degrees and be locked together with steel connection pins
TL-3 Barricade - HSA-10/WZ-224 Specifications
New tamper resistant, offset drain plug with coarse buttress thread
Lenth
72”
Height
32”
Width
18”
Weight (Empty)
80 lbs.
Weight (Filled with water)
1,110 lbs.
Material
Linear Low Density Polyethylene
Color
Orange/Red or White
Distributed by:
160 Avenida La Pata, San Clemente, CA 92673 (949) 361-5663 FAX (949) 361-9205 www.traffixdevices.com PB0714