Eureka Crystal Appliance Dimensions Freestanding C
A
MODEL FREESTANDING
B
A
B
C
868mm
735mm
430mm
D
E
(Optional Pedestal)
Optional Pedestal
G
F
INSERT
868mm
635mm
360mm
600mm
600mm
ZERO CLEARANCE
868mm
635mm
400mm
610mm
675mm
F
G
H
756mm
150mm
390mm
H Zero Clearance
Insert
A
B
B
D
A
C
E
D
C
Zero Clearance Frameout Recommended frame construction for Zero D
Clearance kit. A
B
C
D
720mm
725mm
450mm
1000mm min.
CLEARANCES FROM OUTER CASING
FLOOR
0 mm
SIDES
25 mm
TOP
100 mm
FROM FLUE
25 mm
B A
Contact your dealer for more detailed installation instructions. NOTE: The dimensions and clearances on this page are for
C
reference only. Refer to the Owner’s Manual for operation and exact specifications prior to installation.
YOUR LOCAL AUTHORISED DEALER IS
Eureka Wood & Gas Heating, a division of A F Gason Pty Ltd
Phone: (03) 9729 1422 Fax: (03) 9729 1455 e-mail: eureka@gason.com.au website: www.eureka-heating.com
E
Eureka Crystal
Gas Space Heaters
Sit back, relax and enjoy the dancing flames through the large glass window of the Eureka Crystal. This gas heater has been designed to create the feeling of warmth and ambience of an open fireplace. There are three models in the Crystal range of gas heaters: • A fireplace insert to be used in a masonry chimney. • A zero clearance unit that can be installed in a
Eureka Crystal
timber frame. • A freestanding heater.
Benefits • Realistic flame pattern • No visual obstructions to view of fire • A thermostatically controlled 2 speed fan for better heat transfer • A multifunctional single knob control incorporating a thermoelectric safety device and a flame failure switch • Australian Made
Available Options Crystal Freestanding with optional stainless steel slats
• A pedestal base for the freestanding heater • Four sided fascia available in either stainless steel or satin black for the insert model which will enable the heater to be placed high up into a wall to create a feature • A remote control incorporating a 7-day timer and thermostat • Stainless steel slats • Natural Gas 30 mjh/input: LPG 24 mjh/input
Crystal Freestanding with optional pedestal and stainless steel slats
The fireplace thermostat remote control was developed to provide a safe, reliable and user-friendly control system for a gas fireplace. The system can be operated using the thermostat or manually from the remote. Features an LCD display that shows both the room and thermostat set temperature.
The fireplace insert model can be installed in any brick masonry fireplace and only requires a gas chimney cap and cowl. The other option is to fit a zero clearance kit to the fireplace insert and with minimal clearance requirements this can be installed into a
Standard Crystal Fireplace insert
combustible wall.
Crystal Fireplace insert with optional ZC kit, stainless steel fascia and stainless steel slats
Crystal Fireplace insert with optional stainless steel slats