Upper Wall Spice Cabinet Unit

Page 1

Dream kitchen series

Upper wall spice cabinet unit

The Design Confidential

Www.thedesignconfidential.com


Approximate Building Cost: $25-$50 will vary by region Skill level: beginner - intermediate

Upper wall spice cabinet unit

Wood:

Tape Measure Square Sander

1 1/4" Pocket Hole Screws

1/2 Sheet - 1;4” plyxood

5;8” xood screxs

1/2 sheet - 1;2” plyxood

7;8” brad nails

1/2 sheet - 3;4” plyxood

2” finish nails Wood Glue

Drill

1 - 1x2 at 8'

Saw

1 - 1w3 at 6’

wood filler

Kreg Jig - optional Nail gun - finish nails

Www.thedesignconfidential.com

Sandpaper Finishing supplies


2 - 1;4” ply at 23 1;4”w 3:” (outsides) 1 - 1;4” ply at 11 1;2” w 3:” (back) 2 - 1/2" Ply at 26 3/4" x 22 7/8" (upper interior panels) 2 - 1;2” ply at 1 3;4” w 22 7;8” (Loxer interior Panels) 2 - 3;4” ply at 11 1;2” w 22 7;8” (bottom shelf and cabinet top) 2 - 1w2 at 1: 1;2” (cleats) 2 - 1w2 at 3:” (face frame stiles) 1 - 1w2 at 9” (face frame rail) 1 - 1w3 at 9” (loxer face frame rail)

This cabinet making technique is one of my oxn invention, meant for folks xho don’t own table saws or routers. If you do happen to own a table saw, you are welcome to make this in a more traditional sense and opt for 3;4” ply for the outside panels and carve out dadoes and grooves in the spaces I have created with the interior panels. If you prefer to make this with adjustable shelves, you will need to create them from 3;4” ply and should use 3;4” w 3;4” square trim on the front edge. Otherxise I will be following this plan with a pull out shelving unit for this cabinet. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found on the main page of my site.

The Design Confidential

Www.thedesignconfidential.com


Step 1: Cut your outside panels to size. Be sure they are perfectly square. You can check for square by measuring the diagonals and making sure they match as well as measuring the corner angles for 90 degree accuracy.

The Design Confidential

Www.thedesignconfidential.com


Step 2: Cut your interior panels to size. If you plan on using adjustable shelves, drill your holes according to the diagram below. Otherwise, the next plan in this series is for a pull out unit xith multiple levels. Don’t forget you xill need to mirror this image on the other side, so you will need 4 interior panels in total. The interior panels are constructed from 1;2� plyxood.

Www.thedesignconfidential.com


Step 3:

attach the cleats to the interior panels, if you aren’t using a pocket hole system, be sure to countersink your screws from the outside of the interior panels so that they are flush or below the surface of the panels. Each cleat should be flush with the top of it’s respective interior panel (top cleat xith top panel and the loxer cleat with lower panel).

Www.thedesignconfidential.com


Add the top and bottom shelves to the interior panels, using glue and a pocket hole system if you have one, if you aren’t using a pocket hole jig, simply glue the bottom shelf in place and screw to the upper interior panel using 5;8” screxs and be sure to countersink. Once the shelves are in place, tack on the outside panels using glue and 5;8” screxs from the inside. Leave 3;8” overhang on the backside, Tack on your back using 7;8” brad nails.

Step 4:

Www.thedesignconfidential.com


Step 5: Create your face frame. Use your pocket hole system set for 3;4” stock and place your pocket holes in the rails. attach to the cabinet using 2” finish nails. If you aren’t using a pocket hole jig, simply fasten your face frame to the cabinet using finish nails and glue. You xill attach your cabinet to the xall using 3” dryxall screxs through the cleats. We will cover an easy way to install cabinets in a future plan.

Www.thedesignconfidential.com


Fill any screws holes or pocket holes, sand, and finish as desired!

Upper wall spice cabinet unit

The Design Confidential

Www.thedesignconfidential.com


Disclaimer: Disclaimer: Some rights reserved. The information provided herein is intended for PERSONAL AND PRIVATE use only. Plans from this publication are not to be used for commercial purposes, REPREINTED, or republished without the express written consent of the publisher, Rayan Turner. All plans, materials lists, processes and graphics are considered to be the sole property of rayan turner, and is FOR THE GENERAL PURPOSE OF DOCUMENTING AND SHARING her PERSONAL EXPERIENCES, CREATIVE ENDEAVORS, AND INSPIRATION WITH THOSE INDIVIDUALS WHO SHARE this COMMON INTEREST AND ARE OF A LIKE-MIND, Any information is OFFERED SOLEY FOR THE ENJOYMENT AND ENTERTAINMENT OF SAID INDIIVIDUALS, Please be advised that any persons electing to build a plan shared by the publisher, do so at their own risk, and are thereby assuming full and complete responsibility for their safety and the integrity or stability of the piece. Prior to building, all individuals should understand basic carpentry concepts, procedures, and techniques to the extent they have the knowledge and foresight to recognize a possible inaccuracy, that may compromise the integrity or stability of a project, Accordingly they should have the ability to troubleshoot and modify plans as needed, and according to best building practices, to ensure the finished product is safe, stable, and well made. THE INFORMATION CONTAINED HEREIN should NOT TO BE construed as indicating a claim of expertise, or advisement, and that any information is subject to change or be modified at any point, for any reason. Changes made to a publication may include, but not be limited to, a change in readily available materials, new technologies, or any other factor that may alter the method of construction, the publisher wishes to feature. The publisher’s intent is to provide consistently accurate plans, depicting one possible building process, for a particular project, and for which there may be many alternative methods of construction. The publisher strives to provide well detailed descriptions, that are properly outlined, with accompanying graphics, and helpful personal insights throughout. however, there can be no guarantee of accuracy for any plan as Not every plan published, has been built and tested, Please contact the publisher immediately, if you should come across an error or inaccuracy so that It can remedied. you are building at your own risk, and the commencement of a project shall constitute and imply your express acceptance and agreement to indemnify and hold harmless, rayan turner and the design confidential, in the unfortunate event that you experience any form of loss, injury, or inconvenience, relating to any of the publisher’s content.

Upper wall spice cabinet unit

The Design Confidential

Www.thedesignconfidential.com

For questions or comments, please visit my site:


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.