Flyer Spray Systems

SYSTEMS

BY KRYPTON CHEMICAL

Pol. Industrial Les Tàpies, C/ Martí i Franquès 12 43890 L’Hospitalet de l’Infant · TARRAGONA · SPAIN Telf. +0034 902 908 062 · Fax +0034 977 823 977 rayston@kryptonchemical.com

www.kryptonchemical.com MADE BY:

APPROVED INSTALLER / DISTRIBUTOR:

Building solutions

SPRAY SYSTEMS LASTEST GENERATION SPRAY SYSTEMS WATERPROOFING & PROTECTION

LASEST GENERATION SYSTEMS FOR INDUSTRIAL COATINGS Recent technological developments in spray applied polyurethanes and polyureas are promoting a new revolution in high performance industrial coatings and their applications.

The new market that is emerging is made of high durability solutions that respond to the highest demands in chemical, physical and mechanical properties, with an unrivalled productivity in application which more than offsets the higher costs of the polymers employed.

KRYPTON CHEMICAL has been actively developping this market and its applications, and offers a wide product range of fast and very fast curing systems, that fullfill the needs of the industrial maintenance and construction markets, in general flooring and waterproofing applications, but also in secondary containment and all sorts of tanking applications.

Application through high pressure spray pumping units allows very high productivities at jobs, minimises space occupation and permits inmediate "put-to-service" of these systems.

APPLICATIONS WATER & PAPER INDUSTRY Liners & containment General water containment ponds & storm water treatment plants Potable water tanks

• Solving the limitations associated with conventional waterproofing systems (single ply systems) and traditional coatings (Epoxy) • Total continuity (seamless) • High speed of execution • High performances membranes and coatings (tensile strength, elongation, puncture, tear) • Productivity: allows application of up to 800 m2/day

Cooling circuits / water treatment units CIVIL & INDUSTRIAL INFRASTRUCTURES Waterproofing and protection of concrete against corrosive environments, acidic or basic Construction of liquid retention bunds & secondary containment in general COMMERCIAL BUILDINGS / INDUSTRIAL & FOOD PROCESSING Building roofs Airports facilities High performance continuous flooring Food stuffs’ storage and tanking Waste containment (manure)

CERTIFICATIONS

OIL INDUSTRY & MINING

IMPERMAX POLIUREA H: ETA 10 years Nº 11/0062

Secondary containment in oil & gas industry

POLIUREA: Accreditation of pliability, pulling, punching, Manning coefficient, drinking water and food contact.

Treatments on valves and pipes

POLIUREA F: CBR (static indentation), tear resistance.

POLYURETHANE AND POLYUREA SPRAY SYSTEMS PURE POLYUREA SYSTEM RAYSTON’s pure polyurea is a very high reactivity system, almost unaffected by water or moisture in substrate or in the air during its reaction and curing, and therefore very commonly advised for applications in refurbishment of water tanks as well as in the primary and secondary containment of many chemical liquids, foodstuffs, etc.

PURE POLYUREA is a polymer with outstanding chemical resistance and mechanical properties.

IMPERMAX POLYUREA H SYSTEM

HOT SPRAY APPLIED SYSTEMS for on-site application

ADVANTAGES

FAST & ULTRA CURING

Tanks and retention bunds ENVIRONMENTAL MANAGEMENT Landfill sealing (capping) Leachate ponds Construction of new landfill in complex areas

This system has a 10 year European Technical Approval (ETA), and does not requite any aliphatic top coat.

It is therefore a very cost effective solution in roof refurbishments, terraces and balconies. IMPERMAX POLYUREA H is a polymer with very high chemical and mechanical properties, and is a very good choice in the refurbishment of industrial units and processing plants, as it is both very effective and extremely competitive.

POLYUREA F SYSTEM Is a low hardness polymer, flexible and with very high elasticity (aprox. 600%). It is very commonly used where these properties are important such as in concrete slabs subject to cracks and movements, or where a soft touch polymer is required (automotive applications, flooring applications,...). Is also the choice for applications onto geotextiles (Geomax Spray), as its has extremely low shrinkage values after curing, so the final liner offers a smooth, “wrinkle-free” aspect.

HIGH FLEXIBILITY

POLYUREA SPRAY LINER SYSTEM – GEOMAX SPRAY Through the combination of Polyurea membranes with geotextiles it is possible to obtain very high peformance liners that can effectively substitute traditional single ply systems such as those made from PVC, EPDM, HDPE, etc. These new generation of liners provide continuous solutions and are also extremely powerful dealing with details such as upstands, pipes and hoses, etc. Polyureas are non thermoplastic polymers and offer very high mechanical properties such as puncture strenght, tensile strength, impact resistance, and chemical resistance to many substances. KRYPRON CHEMICAL has developed and patented geotextile for these applications (Geomax Spray) which offers great quality (no polymer penetration), and a lower consumption of resins.

KRYPTANATE SPRAY SYSTEM Is an aliphatic polyurea which can be used either as a top coat over aromatic polyurea systems, or as a high performance flooring system on its own. This solvent free, fast cure system is totally non yellowing and has good chemical resistance. Its reaction time can be adjusted, so it can also incorporate anti-skid aggregates for treatments in ramps and flooring that is subject to heavy traffic and which must be re-open very short after coating. Kryptanate systems are also known for their high resistance to corrosion, so they are commonly used in coating of large concrete and steel parts in the energy, construction and industrial markets.