Thomafluid II (english)

Reichelt Chemietechnik GmbH + Co.

Thomafluid® II Tubings and Pipes Analytical Tubing Pressure Tubings Pharmaceutical Tubing Corrugated Tubings Elastomers: Silicone and TPEE Plastics: ETFE, FEP, MFA, PA, PE, PEEK, PFA PI, PP, PTFE und PVDF Metals: Stainless steel and Titanium

Connectors Luer-/Lock Capillary (HPLC) Tubing Olive Connectors

Reichelt Chemietechnik ’15 Shopping per mouseclick www.rct-online.de

Reichelt Chemietechnik GmbH + Co.

EnglerstraĂ&#x;e 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de

Heidelberger Schloss

Inhaltsübersicht nach Werkstoffen (Elastomere) Content: Tubing (according to materials used)

Seite page

Tubing made of Elastomers (Soft Rubber) • Silicone Tubing • TPEE Tubing

3 - 27 28 - 29

Tubing and Pipes made of Rigid Plastics • ETFE Tubing • FEP Tubing • MFA Tubing • PA Tubing • PE Tubing • PEEK Tubing • PFA Tubing • PI Tubing • PP Tubing • PTFE Tubing • PVDF Tubing

30 30 - 34 34 - 36 36 - 44 45 - 54 55 - 56 56 - 59 60 61 - 62 63 - 75 75 - 77

Tubing, Pipes and Capillarys made of Metals • Stainless Steel Tubing • Titanium and Stainless Steel Capillaries

77 - 80 80 - 82

Clamps and Cutters • Hose-/Tubing clamps • Pipe Clips/-Clamps • Cutters and Saws

82 - 86 86 - 87 87 - 88

Content: Tubing (according to application areas) Anti-Electrostatic Tubing Bellows Tubing Bundling Spirals Capillary Tubing Catheter Tubing Colour-Coded Tubing Composite Tubing Cooling Water Tubing Corrugated Tubing Double-Wall Jacket Tubing Drinking Water Tubing Food Technology, Food Tubing Gas Tubing Heat Exchanger Tubing Heat Insulating Tubing High-Pressure Tubing High-Temperature Tubing

page 19, 34, 53, 58-59, 67, 69-70 32 86 4, 30, 55-56, 60, 66, 80-82, 85, 88 4 6, 17, 66 29, 33, 50 25 36, 44, 53, 58-59, 62, 68-69, 73, 76 27, 29, 33-34, 44, 50, 53-54, 70 49 13-14, 22-23, 29, 48-49, 68-69, 75 44, 51, 66, 73 21, 62 26 44, 55, 71-73 11, 22, 24, 50 THOMAFLUID® II - 2015

Content: Tubing (according to application areas) Hot Air Tubing Hydraulic and Pneumatic Tubing Industrial Tubing Inhalation Tubing Insulating Tubing Micro Tubing Multichannel Tubing Multilumen Tubing Net Tubing Pharmaceutical Tubing Pressure Pipes / Pressure Tubing Profile Tubing Pump Tubing (with and without Stoppers) Respiratory Tubing Safety and Protective Tubing Shrinkable Tubing Solvent Tubing Spiral Tubing Suction and Pressure Tubing Tubing for Analytic Technology Tubing for Beverages Tubing for Biodiesel Tubing for Biotechnology Tubing for Chemical Process Technology Tubing for Electrical Engineering Tubing for Industrial Engineering Tubing for Mechanical Engineering Tubing for Medical Engineering Tubing for Mineral Oils Tubing for Plant Construction Tubing for Rape Oil Tubing with High-Quality Steel Braiding Vacuum Tubing Water Tubing

page

26-27 28, 31, 36, 38, 40, 42, 51-52 28, 34, 36, 40, 43, 50-51, 53, 59, 61, 68-70, 75 20 6, 26, 74-75, 77 4, 47 19 41 54 8, 13-15, 22-23, 29, 34, 50, 68-70, 75 22-24, 34, 40, 43-44, 55, 66, 70-73, 78-79, 81-82 21 3-4, 13-14 20 44, 51, 54, 61-62, 76-77, 79 32, 74-75, 77 30-34, 36, 56-59, 63-64, 66-73, 75 20, 42-43, 56, 75 34, 70 4, 6, 14, 20, 30, 34, 45, 47, 61, 63-64, 66, 68 48-49 30-34, 56-59, 63-64, 66-75 14, 22-23, 30-32, 34, 42, 49-50, 63-64, 68, 76 8, 14, 20, 26, 28, 30, 34, 50, 61, 63-64, 68, 70, 75-76 34, 36, 53, 60 29, 40 26, 31-32, 76 8, 14-16, 20, 29-31, 34, 41-42, 47-48, 63-64, 68 34, 43, 69-70 29, 31-32, 34, 42, 51, 53, 62, 76 30-34, 56-59, 63-64, 66-75 71-73 21, 23, 28, 40, 43, 51, 79 25, 49, 51, 61

Content: One-Piece Connectors (plastics)

page

• Luer-Lock Connectors • Capillary Connectors (HPLC) • Mini Barb Connectors • Tubing Olive Connectors (I-Ø: 3-25 mm)

89 - 97 97 - 102 102 - 109 109 - 112

THOMAFLUID® II - 2015

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

Tubing made of Elastomers (Soft Rubber) Silicone Tubing

Item ​ 43770 43771 43772

THOMAFLUID®-Silicone Pump Tubing Fitted with 2 Stoppers Application area

Inside Ø mm

Outside Wall Ø thickness mm mm

2.54 2.79 3

4.22 4.47 4.8

0.84 0.84 0.84

Colour code ​

Unit

Price

piece

EURO

violet/orange violet/white green/white

3 3 3

102.00 102.00 102.00

THOMAFLUID®-Silicone Pump Tubing Fitted with 3 Stoppers

• For peristaltic pumps with tubing cassettes.

Product specification

• Fitted with two involved stoppers each for mounting in tubing cassettes; colour-coded for clearly organized use • Application-oriented, precision adjusted inside diameters from 0.64 to 3.00 mm; total length 406 mm; distance between stoppers approx. 152 mm.

Technical specification

• Material: made of platinum-catalyzed silicone • Colour: translucent • Shore hardness A: 50° ±3° (DIN 53505) • Temperature range: -51 to +238 °C • Tolerance: DIN ISO 3302-1 E2 • Regulations: USP class VI; FDA 21 CFR 177.2600

Application area

• For peristaltic pumps with mini tubing cassettes.

Product specification

• Fitted with three involved stoppers each for mounting in mini tubing cassettes, double operating time due to twofold usability of the tubing; colour-coded for clearly organized use.

• Application-oriented, precision adjusted inside diameters from 0.64 to 2.79 mm; total length: 406 mm; distance between stoppers: approx. 72 mm.

Technical specification

• Material: made of platinum-catalyzed silicone • Colour: translucent • Shore hardness A: 60° ±3° (DIN 53505) • Temperature range: -51 to +238 °C • Tolerance: DIN ISO 3302-1 E2 • Regulations: USP class VI and FDA 21 CFR 177.2600

​

​

Item ​

Item ​ 43758 43759 43760 43761 43762 43763 43764 43765 43766 43767 43768 43769

Inside Ø mm 0.64 0.76 0.89 1.02 1.14 1.3 1.42 1.52 1.65 1.75 2.06 2.29

Outside Wall Ø thickness mm mm 2.46 2.44 2.57 2.7 2.82 2.98 3.1 3.2 3.33 3.43 3.74 3.97

0.91 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84

Colour code ​

Unit

Price

piece

EURO

orange/white black orange white red grey yellow yellow/blue blue green violet violet/black

3 3 3 3 3 3 3 3 3 3 3 3

102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00

43773 43774 43775 43776 43777 43778 43779 43780 43781 43782 43783 43784 43785 43786

Inside Ø mm 0.64 0.76 0.89 1.02 1.14 1.3 1.42 1.52 1.65 1.75 2.06 2.29 2.54 2.79

Outside Wall Ø thickness mm mm 2.46 2.44 2.57 2.7 2.82 2.98 3.1 3.2 3.33 3.43 3.74 3.97 4.22 4.47

0.91 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84

Colour code ​

Unit

Price

piece

EURO

orange/white black orange white red grey yellow yellow/blue blue green violet violet/black violet/orange violet/white

3 3 3 3 3 3 3 3 3 3 3 3 3 3

117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00

THOMAFLUID® II - 2015 3

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

THOMAFLUID®-Silicone Micro-Spaghetti Tubing for Analytic Technology

Item

Product specification

Outside Ø mm

Wall thickness mm

Unit

​

Inside Ø mm

m

EURO

339064 339065 339066 339067 339068 339069 339070

2.057 2.286 2.286 2.54 2.54 2.794 2.794

3.734 3.962 3.962 4.216 4.216 4.47 4.47

0.838 0.838 0.838 0.838 0.838 0.838 0.838

10 5 10 5 10 5 10

135.00 81.00 135.00 81.00 135.00 81.00 135.00

• Exceptionally resistant to acids and alkaline and other solutions.

• Extruded from high quality, pure silicone.

• Permanent controls of the inside and outside diameters and the wall thickness ensure continuous performance.

• Physiologically harmless in every respect.

Technical specification

• Material: Silicone (silicone rubber) • Colour: transparent • Shore hardness A: 62° ±5° (DIN 53505) • Temperature range: -60 bis +200 °C, for a short time +250 °C • Density: 1.14 g/cm3 (DIN 53749) • Tearing strength: 11 N/mm2 (DIN 53504 S1) • Elongation at break: 385 % (DIN 53504 S1) • Tear propagation resistance: 21 N/mm2 (ASTM D 624 Die B) • Compression set: 35 % (DIN 53517) • Dielectric strength: ca. 29 KV/mm • Tolerance inside Ø: up to 2 mm: ±0.15 mm; 2-5 mm: ±0.2 mm; 5-12 mm: ±0.3 mm • Tolerance wall thickness: up to 3.5 mm: ±0.1 mm; 4-12 mm: ±0.15 mm • Regulations: BfR Class XV; FDA 21 CFR177.2600 ​

THOMAFLUID®-Silicone Special Compound Analytical Tubing Product specification

• Injection-molded of especially high-grade silicone elastomer, annealed twice for 20 hrs at +20 °C in the rotary furnace.

• Absolutely homogenous quality paired with high flexibility.

• Physiologically safe in every respect.

• Excellent stability in heat and hot air.

• Highest flexibility in cold.

• Very good resistance to ozone, aging, and weather.

• Very good dielectric properties; tested especially for breakdown strength under wet conditions.

• Antiadhesive surface properties.

• High permeability to gas.

• Good radiation resistance.

• High electrical insulating capacity.

• High resistance to a wide spectrum of chemical compounds.

Technical specification

Item

Outside Ø mm

Wall thickness mm

Unit

​

Inside Ø mm

m

EURO

339043 339044 339045 339046 339047 339048 339049 339050 339051 339052 339053 339054 339055 339056 339057 339058 339059 339060 339061 339062 339063

0.635 0.635 0.762 0.762 0.889 0.889 1.016 1.016 1.143 1.143 1.295 1.295 1.422 1.422 1.524 1.524 1.651 1.651 1.854 1.854 2.057

2.464 2.464 2.438 2.438 2.565 2.565 2.692 2.692 2.819 2.819 2.972 2.972 3.099 3.099 3.2 3.2 3.327 3.327 3.531 3.531 3.734

0.914 0.914 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838 0.838

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

81.00 135.00 81.00 135.00 81.00 135.00 81.00 135.00 81.00 135.00 81.00 135.00 81.00 135.00 81.00 135.00 81.00 135.00 81.00 135.00 81.00

4 THOMAFLUID® II - 2015

Price

Price

• Material: Silicone (silicone rubber) • Colour: transparent • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +200 °C (Class H); for a short period +350 °C • Resistance to hot steam: +140 °C • Sterilization: steam (+136 °C) • Embrittlement temperature: -65 °C • Density: 1.19 g/cm3 • Rebound elasticity: 35 % (DIN 53505) • Elongation at break: 300 % (DIN 53504 S2) • Dielectric strength: ca. 18 KV/mm (VDE 0303) • Volume Resistivity: 1015 Ohm x cm/+20 °C (VDE 0303) • Dielectric constant: 3.2/+25 °C/50 Hz (DIN 53482) • Tolerances inside Ø and wall thickness: from 0.2 - 2 mm ±0.15 mm from 2.5 - 5 mm ±0.25 mm from 5.5 - 12 mm ±0.3 mm from 13 - 20 mm ±0.4 mm from 22 - 30 mm ±0.6 mm above ±0.8 mm ​

Tubing - Silicone Tubing Item ​ 331473 331474 14164 14165 14166 14167 14170 14171 14174 14175 14178 14179 14180 14181 14182 14183 14184 14185 9310816 9310826 14186 14187 14188 14189 14190 14191 14192 14193 14194 14195 14196 14197 14198 14199 14202 14203 14204 14205 14206 14207 14208 14209 14210 14211 14212 14213 14214 14215 14216 14217 14218 14219 14220 14221 14222

Tubing made of Elastomers (Soft Rubber)

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

Item

0.2 0.2 0.3 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.8 1 1 1 1 1 1 1 1 1.2 1.2 1.3 1.3 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2

0.4 0.4 0.5 0.5 0.7 0.7 0.7 0.7 0.9 0.9 1.1 1.1 1.3 1.3 1.5 1.5 2.5 2.5 3 3 0.9 0.9 1.1 1.1 1.3 1.3 1.7 1.7 2.1 2.1 1.6 1.6 1.4 1.4 1.8 1.8 2 2 2.4 2.4 2 2 1.7 1.7 1.9 1.9 2.1 2.1 2.3 2.3 2.5 2.5 2.9 2.9 2.4

0.1 0.1 0.1 0.1 0.2 0.2 0.1 0.1 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.5 1 1 1.25 1.25 0.1 0.1 0.2 0.2 0.3 0.3 0.5 0.5 0.7 0.7 0.4 0.4 0.2 0.2 0.4 0.4 0.5 0.5 0.7 0.7 0.4 0.4 0.2 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.5 0.7 0.7 0.2

m

EURO

​

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 3 25 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5

68.00 165.00 26.00 69.00 28.00 72.00 26.00 69.00 29.00 75.00 34.00 81.00 36.00 87.00 38.00 91.00 54.00 146.00 34.00 271.00 28.00 73.00 30.00 76.00 34.00 85.00 36.00 98.00 49.00 131.00 44.00 116.00 29.00 77.00 35.00 95.00 38.00 102.00 49.00 133.00 39.00 105.00 31.00 82.00 34.00 93.00 40.00 107.00 46.00 126.00 49.00 141.00 59.00 159.00 35.00

14223 14226 14227 14228 14229 14230 14231 14232 14233 14234 14235 14236 14237 14238 14239 14240 14241 14242 14243 14244 14245 14246 14247 14248 14249 14250 14251 14252 14253 14254 14255 14256 14257 14258 14259 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 14270 14271 14272 14273

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

m

EURO

2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3.5 3.5 4 4 4 4 5 5 6 6 7 7 7 7 8 8 8 8 10 10 18 18 20 20 24 24 25 25 32 32

2.4 2.8 2.8 3.4 3.4 4 4 2.9 2.9 3.3 3.3 3.5 3.5 4.5 4.5 5.5 5.5 3.6 3.6 4.3 4.3 5.4 5.4 6 6 7 7 7 7 8 8 8.4 8.4 9 9 9.4 9.4 13 13 20 20 22 22 28 28 29 29 36 36

0.2 0.4 0.4 0.7 0.7 1 1 0.2 0.2 0.4 0.4 0.5 0.5 1 1 1.5 1.5 0.3 0.3 0.4 0.4 0.7 0.7 1 1 1 1 0.5 0.5 0.5 0.5 0.7 0.7 0.5 0.5 0.7 0.7 1.5 1.5 1 1 1 1 2 2 2 2 2 2

15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

94.00 45.00 123.00 60.00 181.00 73.00 201.00 41.00 110.00 59.00 158.00 63.00 166.00 82.00 225.00 113.00 302.00 45.00 114.00 57.00 154.00 65.00 177.00 79.00 216.00 96.00 262.00 57.00 154.00 82.00 223.00 93.00 254.00 92.00 246.00 108.00 292.00 215.00 553.00 259.00 678.00 266.00 698.00 384.00 967.00 427.00 1,097.00 476.00 1,189.00

THOMAFLUID® II - 2015 5

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

THOMAFLUID®-Silicone Analytical Tubing - coloured

Item

Application area

​

• Insulation of wires and litz wires in the areas of electronic engineering, electric machine construction and apparatus engineering (especially at high frequency and high temperatures).

Product specification

• The elastomer forms, in case of fire, an insulating ash consisting of silicon oxide without separating aggressive or corrosive gases.

• The tubing can be laid without sticking together due to talcing.

• Resistant to weather and aging.

• UV- and ozone-resistant.

• Permanently elastic at high and low temperatures.

• Physiologically safe.

• Without plasticizers.

Technical specification

• Material: silicone (silicone rubber) • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +200 °C (Class H) • Sterilization: steam (+140 °C) • Density: 1.19 g/cm3 • Compression set: <40 % at +175 °C / 22 h (DIN 53517) • Elongation at break: >300 % (DIN 53504 S2) • Dielectric strength: approx. 18 KV/mm (VDE 0303) • Volume resistivity: 1015 Ohm x cm (VDE 0303) • Dielectric constant: 3.0 / +25 °C / 50 Hz (DIN 53482) • Dielectric loss factor: 30*10-4 to 250*10-4 (VDE 0303) • Tolerance inside Ø and wall thickness: ±0.1 mm ​

Item ​ 26519 26520 26521 26522 26523 26524 26525 26526 26527 26528 26529 26530 26531 26532 26533 26534 26535 26536

Inside Ø mm 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

Outside Wall Ø thickness mm mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

6 THOMAFLUID® II - 2015

0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1

Colour

Unit

Price

​

m

EURO

blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00

26537 26538 26539 26540 26541 26542 26543 26544 26545 26546 26547 26548 26549 26550 26551 26552 26553 26554 26555 26556 26557 26558 26559 26560 26561 26562 26563 26564 26565 26566 26567 26568 26569 26570 26571 26572 26573 26574 26575 26576 26577 26578 26579 26580 26581 26582 26583 26584 26585 26586 26587 26588 26589 26590 26591

Inside Ø mm 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Outside Wall Ø thickness mm mm 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 0.9 0.9

0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2

Colour

Unit

Price

​

m

EURO

white white orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white orange orange blue blue brown brown yellow yellow grey

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5

26.00 69.00 26.00 69.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 28.00 72.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 26.00 69.00 29.00 75.00 29.00 75.00 29.00 75.00 29.00

Tubing - Silicone Tubing Item ​ 26592 26593 26594 26595 26596 26597 26598 26599 26600 26601 26602 26603 26604 26605 26606 26607 26608 26609 26610 26611 26612 26613 26614 26615 26616 26617 26618 26619 26620 26621 26622 26623 26624 26625 26626 26627 26628 26629 26630 26631 26632 26633 26634 26635 26636 26637 26638 26639 26640 26641 26642 26643 26644 26645 26646

Inside Ø mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

Tubing made of Elastomers (Soft Rubber)

Outside Wall Ø thickness mm mm 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2

Colour

Unit

Price

Item

​ grey green green pink pink red red black black violet violet white white orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet

m

EURO

​

15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

75.00 29.00 75.00 29.00 75.00 29.00 75.00 29.00 75.00 29.00 75.00 29.00 75.00 29.00 75.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 28.00 73.00 30.00 76.00 30.00 76.00 30.00 76.00 30.00 76.00 30.00 76.00 30.00 76.00 30.00 76.00 30.00 76.00 30.00 76.00

26647 26648 26649 26650 26651 26652 26653 26654 26655 26656 26657 26658 26659 26660 26661 26662 26663 26664 26665 26666 26667 26668 26669 26670 26671 26672 26675 26676 26677 26678 26679 26680 26681 26682 26683 26684 26685 26686 26687 26688 26689 26690 26691 26692 26693 26694 26695 26696 26697 26698 26699 26700 26701 26702 26703

Inside Ø mm 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1 1 1 1

Outside Wall Ø thickness mm mm 1.1 1.1 1.1 1.1 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4

0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2

Colour

Unit

Price

​

m

EURO

white white orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white orange orange brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white orange orange blue blue brown brown yellow yellow grey grey green

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5

30.00 76.00 30.00 76.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 34.00 85.00 44.00 116.00 44.00 116.00 44.00 116.00 44.00 116.00 44.00 116.00 44.00 116.00 44.00 116.00 44.00 116.00 44.00 116.00 44.00 116.00 29.00 77.00 29.00 77.00 29.00 77.00 29.00 77.00 29.00

THOMAFLUID® II - 2015 7

Tubing - Silicone Tubing Item ​ 26704 26705 26706 26707 26708 26709 26710 26711 26712 26713 26714 26715 26716 26717 26718 26719 26720 26721 26722 26723 26724 26725 26726 26727 26728 26729 26730 26731 26732 26733 26734 26735 26736 26737 26738 26739 26740 26741 26742 26743 26744 26745 26746 26747 26748 26749 26750 26751 26752 26753 26754 26755 26756 26757 26758

Inside Ø mm 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Tubing made of Elastomers (Soft Rubber)

Outside Wall Ø thickness mm mm 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3

8 THOMAFLUID® II - 2015

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4

Colour

Unit

Price

Item

​ green pink pink red red black black violet violet white white orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white

m

EURO

​

15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

77.00 29.00 77.00 29.00 77.00 29.00 77.00 29.00 77.00 29.00 77.00 29.00 77.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 38.00 102.00 46.00 126.00 46.00 126.00 46.00 126.00 46.00 126.00 46.00 126.00 46.00 126.00 46.00 126.00 46.00 126.00 46.00 126.00 46.00 126.00

26759 26760 26761 26762 26763 26764 26765 26766 26767 26768 26769 26770 26771 26772 26773 26774 26775 26776 26777 26778 26779 26780 26781 26782

Inside Ø mm 1.5 1.5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Outside Wall Ø thickness mm mm 2.3 2.3 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8

0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4

Colour

Unit

Price

​

m

EURO

orange orange blue blue brown brown yellow yellow grey grey green green pink pink red red black black violet violet white white orange orange

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

46.00 126.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00 49.00 133.00

THOMAFLUID®-High-Tech-Silicone Chemical Tubing Standard Application area

• Laboratory technology, medical engineering, process engineering, process technology, pharmaceutical technology, chemical technology

Product specification

• Conveying tubing • Very good resistance to temperature • Excellent resistance to hot air • Highest flexibility in cold • Good chemical resistance • Very good resistance to ozone, aging, and weather • Very good dielectric properties • Physiologically safe • Antiadhesive surface properties • Very good elastic behaviour • Highest permeability to gas

Technical specification

• Material: Silicone (silicone rubber) • Colour: translucent • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +200 °C; for a short period +250 °C • Density: 1.17 ±0.02 g/cm3 (ISO 1183-1 A) • Resistance to hot air: up to +200 °C • Sterilization: steam (+134 °C) • Elongation at break: 480 % (DIN 53504-S1) • Tearing strength: 10.0 N/mm2 (DIN 53504-S1) • Tear propagation resistance: 35 N/mm (ASTM D624 B) • Compression set: 33 % at +175 °C / 22 h (ISO 815-B) • Tolerance: DIN ISO 3302-1 E2 ​

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber) Item ​

Item ​ 92011 48229 92012 92013 48230 92014 92015 48231 92016 92017 48232 92018 92019 48233 92020 92021 48234 92022 931171 931172 92023 48235 92024 92025 48236 92026 92027 48237 92028 941553 941554 941555 92029 48238 92030 92031 48239 92032 92033 48240 92034 941551 339365 941552 92035 48241

Inside Ø mm 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4

Outside Ø Wall thickness mm mm 3 3 3 4 4 4 6 6 6 3.5 3.5 3.5 5.5 5.5 5.5 3 3 3 4 4 5 5 5 6 6 6 4 4 4 5 5 5 6 6 6 7 7 7 5 5 5 6 6 6 7 7

1 1 1 1.5 1.5 1.5 2.5 2.5 2.5 1 1 1 2 2 2 0.5 0.5 0.5 1 1 1.5 1.5 1.5 2 2 2 0.5 0.5 0.5 1 1 1 1.5 1.5 1.5 2 2 2 0.5 0.5 0.5 1 1 1 1.5 1.5

Unit m

Price EURO

3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 25 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 25 3 10

30.00 83.00 104.00 62.00 148.00 185.00 50.00 119.00 141.00 30.00 83.00 104.00 31.00 84.00 107.00 30.00 83.00 104.00 30.00 260.00 30.00 83.00 104.00 34.00 99.00 114.00 30.00 83.00 104.00 32.00 89.00 117.00 34.00 92.00 121.00 37.00 96.00 121.00 30.00 83.00 104.00 43.00 103.00 225.00 50.00 117.00

92036 92037 48242 92038 92039 48243 92040 92041 48244 92042 92043 48245 92044 92045 48246 92046 92047 48247 92048 92049 48248 92050 92051 48249 92052 92053 48250 92054 92055 48251 92056 92057 48252 92058 92059 48253 92060 92061 48254 92062 92063 48255 92064 92065 48256 92066 92067 48257 92068 92069 48258 92070 92071 48259 92072 92073

Inside Ø mm 4 4 4 4 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8

Outside Ø Wall thickness mm mm 7 8 8 8 6 6 6 8 8 8 9 9 9 8 8 8 9 9 9 10 10 10 11 11 11 12 12 12 9 9 9 10 10 10 11 11 11 12 12 12 13 13 13 10 10 10 11 11 11 12 12 12 13 13 13 14

1.5 2 2 2 0.5 0.5 0.5 1.5 1.5 1.5 2 2 2 1 1 1 1.5 1.5 1.5 2 2 2 2.5 2.5 2.5 3 3 3 1 1 1 1.5 1.5 1.5 2 2 2 2.5 2.5 2.5 3 3 3 1 1 1 1.5 1.5 1.5 2 2 2 2.5 2.5 2.5 3

Unit m

Price EURO

15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3

147.00 56.00 127.00 158.00 30.00 83.00 104.00 35.00 92.00 117.00 47.00 125.00 158.00 40.00 102.00 117.00 44.00 119.00 150.00 56.00 148.00 178.00 73.00 239.00 298.00 69.00 200.00 241.00 39.00 116.00 131.00 42.00 126.00 145.00 66.00 167.00 209.00 70.00 180.00 220.00 81.00 220.00 283.00 53.00 138.00 172.00 59.00 167.00 209.00 65.00 166.00 206.00 64.00 192.00 237.00 92.00

THOMAFLUID® II - 2015 9

Tubing - Silicone Tubing Item ​ 48260 92074 92075 48261 92076 92077 48262 92078 92079 48263 92080 92081 48264 92082 92083 48265 92084 92085 48266 92086 92087 48267 92088 92089 48268 92090 92091 48269 92092 92093 92094 48270 92095 92096 48271 92097 92098 48272 92099 92100 48273 92101 92102 48274 92103 92104 48275 92105 92106 48276 92107 92108 48277 92109 92110 48278

Inside Ø mm 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 14 14 14 14 14 14 14 14 14 15 15 15 15 15 15 15 15 15

Tubing made of Elastomers (Soft Rubber)

Outside Ø Wall thickness mm mm 14 14 11 11 11 12 12 12 13 13 13 14 14 14 15 15 15 12 12 12 14 14 14 15 15 15 16 16 16 14 14 14 16 16 16 18 18 18 16 16 16 18 18 18 20 20 20 17 17 17 19 19 19 21 21 21

10 THOMAFLUID® II - 2015

3 3 1 1 1 1.5 1.5 1.5 2 2 2 2.5 2.5 2.5 3 3 3 1 1 1 2 2 2 2.5 2.5 2.5 3 3 3 1 1 1 2 2 2 3 3 3 1 1 1 2 2 2 3 3 3 1 1 1 2 2 2 3 3 3

Unit m

Price EURO

10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 3 10 15 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10

264.00 323.00 54.00 147.00 184.00 61.00 163.00 204.00 70.00 177.00 221.00 72.00 214.00 260.00 121.00 254.00 322.00 58.00 156.00 191.00 65.00 185.00 226.00 81.00 230.00 280.00 95.00 273.00 336.00 22.00 87.00 151.00 33.00 111.00 192.00 34.00 141.00 245.00 34.00 141.00 245.00 34.00 141.00 245.00 37.00 147.00 255.00 34.00 140.00 245.00 34.00 141.00 245.00 42.00 180.00 294.00

Item ​ 92111 92112 48279 92113 92114 48280 92115 92116 48281 92117 92118 14468 92119 92120 14469 92121 92122 14470 92123 92124 14471 92125 92126 14472 92127 92128 14473 92129 92130 14474 92131 92132 14475 92133 92134 14476 92135 92136 14477 92137 92138 14478 92139 92140 14479 92141 92142 14480 340793 340794 340795 340796 340797 340798 340799 340800

Inside Ø mm 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 20 22 22 22 22 22 22 25 25 25 25 25 25 25 25 25 25 30 30 32 32

Outside Ø Wall thickness mm mm 18 18 18 20 20 20 22 22 22 24 24 24 22 22 22 24 24 24 26 26 26 28 28 28 24 24 24 26 26 26 28 28 28 30 30 30 28 28 28 30 30 30 31 31 31 33 33 33 35 35 37 37 40 40 36 36

1 1 1 2 2 2 3 3 3 4 4 4 2 2 2 3 3 3 4 4 4 5 5 5 2 2 2 3 3 3 4 4 4 5 5 5 3 3 3 4 4 4 3 3 3 4 4 4 5 5 6 6 5 5 2 2

Unit m

Price EURO

1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 5 10 5 10 5 10 5 10

34.00 141.00 245.00 34.00 141.00 245.00 45.00 194.00 315.00 62.00 228.00 389.00 54.00 215.00 389.00 54.00 215.00 389.00 68.00 246.00 424.00 67.00 246.00 450.00 67.00 256.00 461.00 67.00 266.00 476.00 67.00 266.00 476.00 67.00 341.00 590.00 67.00 266.00 476.00 67.00 294.00 508.00 67.00 266.00 476.00 67.00 322.00 547.00 328.00 544.00 342.00 558.00 338.00 608.00 220.00 378.00

Tubing - Silicone Tubing Item ​ 340801 340802 340803 340804

Inside Ø mm

Tubing made of Elastomers (Soft Rubber)

Outside Ø Wall thickness mm mm

35 35 40 40

45 45 50 50

5 5 5 5

Unit m

Price EURO

5 10 5 10

420.00 688.00 472.00 774.00

THOMAFLUID®-Silicone High-Temperature Chemical Tubing Product specification

• Superelastic special tubing for extreme applications at highest temperatures and continuous load.

• Even at highest temperatures, no changes occur in the properties of material.

• The product is only extruded of an especially high-grade silicone elastomer and vulcanized. The cured goods do not contain any extractable constituents.

• Superior and outstanding elasticity.

• Completely odourless and tasteless.

• Physiologically inert and well tolerated by the body.

• Highest resistance to cold.

• Very good resistance to ozone, aging, and weather.

• Antiadhesive surface properties.

• Very good dielectric properties.

• High permeability to gas.

Technical specification

• Material: Silicone (silicone rubber) • Colour: ivory • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +300 °C (no continuous operation for 24h/7-days at +300 °C) • Density: 1.17 g/cm3 (DIN 53479) • Sterilization: autoclavable (+136 °C); hot air (+250 °C); steam (+136 °C); gas (formalin, ethylene oxide); gamma-rays • Thermal conductivity: 0.6 x 10-3 cal/cm/°C/sec.

• Tearing strength: 10.4 MPa • Elongation at break: 390 % (DIN 53504) • Tear propagation resistance: 20 N/mm (ASTM D624 B) • Compression set: 50 % at +175 °C / 22 h (DIN ISO 815) • Dielectric strength: 20 kV/mm • Volume resistance: 4.2 x 1015 Ohm/cm3/+20 °C; 2.6 x 1013 Ohm/cm3/+130 °C; 5.2 x 1012 Ohm/cm3/+180 °C • Dielectric constant: 3.2 / +20 °C / 800 Hz; 2.9 / +180 °C / 800 Hz; 2.9 / +180 °C / 800 Hz • Tolerance: DIN ISO 3302-1 E2 (DIN 7715 E2) ​

Item ​ 28686 28687 48167 28689 28690 48168 28691 28692 48169 28693 28694 48170 28695 28696 48171 28697 28698 48172 28699 28700 48173 28701 28702 48174 28703 28704 48175 28705 28706 48176 28707 28708 48177 28709 28710 48178 28711 28712 48179 28713 28714 48180 28715 28716 48181 28717 28718 48182 28719 28720 48183 28721 28722 48184 28723 28724

Inside Ø mm 0.3 0.3 0.3 0.5 0.5 0.5 0.7 0.7 0.7 0.8 0.8 0.8 1 1 1 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3

Outside Ø Wall thickness mm mm 0.7 0.7 0.7 0.9 0.9 0.9 1.1 1.1 1.1 1.6 1.6 1.6 1.4 1.4 1.4 1.8 1.8 1.8 3 3 3 4 4 4 1.9 1.9 1.9 2.3 2.3 2.3 3.5 3.5 3.5 2.4 2.4 2.4 2.8 2.8 2.8 4 4 4 5 5 5 3.5 3.5 3.5 4.5 4.5 4.5 5.5 5.5 5.5 3.8 3.8

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.2 0.2 0.2 0.4 0.4 0.4 1 1 1 1.5 1.5 1.5 0.2 0.2 0.2 0.4 0.4 0.4 1 1 1 0.2 0.2 0.2 0.4 0.4 0.4 1 1 1 1.5 1.5 1.5 0.5 0.5 0.5 1 1 1 1.5 1.5 1.5 0.4 0.4

Unit m

Price EURO

5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15

17.00 39.00 64.00 17.00 39.00 64.00 17.00 39.00 64.00 19.00 43.00 69.00 19.00 43.00 69.00 19.00 43.00 69.00 26.00 63.00 103.00 37.00 87.00 139.00 22.00 53.00 82.00 24.00 57.00 90.00 37.00 87.00 139.00 27.00 64.00 95.00 29.00 68.00 97.00 37.00 87.00 139.00 46.00 112.00 169.00 30.00 71.00 105.00 46.00 112.00 169.00 51.00 122.00 182.00 34.00 80.00

THOMAFLUID® II - 2015 11

Tubing - Silicone Tubing Item ​ 48185 28725 28726 48186 28727 28728 48187 28729 28730 48188 28731 28732 48189 28733 28734 48190 28735 28736 48191 28737 28738 48192 28739 28740 48193 28741 28742 48194 28743 28744 48195 28745 28746 48196 28747 28748 48197 28749 28750 48198 28751 28752 48199 28753 28754 48200 28755 28756 48201 28757 28758 48202 28759 28760 48203 28761

Inside Ø mm 3 3 3 3 3 3 3 3 3 3 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4 4 4 4 4.5 4.5 4.5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6

Tubing made of Elastomers (Soft Rubber)

Outside Ø Wall thickness mm mm 3.8 5 5 5 6 6 6 7 7 7 4.5 4.5 4.5 5.5 5.5 5.5 6.5 6.5 6.5 7.5 7.5 7.5 5 5 5 6 6 6 7 7 7 8 8 8 6.5 6.5 6.5 5.6 5.6 5.6 6 6 6 7 7 7 8 8 8 9 9 9 7 7 7 8

12 THOMAFLUID® II - 2015

0.4 1 1 1 1.5 1.5 1.5 2 2 2 0.5 0.5 0.5 1 1 1 1.5 1.5 1.5 2 2 2 0.5 0.5 0.5 1 1 1 1.5 1.5 1.5 2 2 2 1 1 1 0.3 0.3 0.3 0.5 0.5 0.5 1 1 1 1.5 1.5 1.5 2 2 2 0.5 0.5 0.5 1

Unit m

Price EURO

25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5

120.00 48.00 117.00 174.00 55.00 131.00 187.00 66.00 158.00 234.00 47.00 115.00 190.00 51.00 122.00 192.00 65.00 157.00 235.00 71.00 170.00 248.00 48.00 116.00 182.00 51.00 122.00 192.00 66.00 158.00 235.00 71.00 170.00 250.00 66.00 158.00 236.00 51.00 122.00 192.00 48.00 116.00 179.00 63.00 150.00 224.00 70.00 167.00 250.00 73.00 174.00 260.00 51.00 122.00 192.00 74.00

Item ​ 28762 48204 28763 28764 48205 28765 28766 48206 28767 28768 48207 28769 28770 48208 28771 28772 48209 28773 28774 48210 28775 28776 48211 28777 28778 48212 28779 28780 48213 28781 28782 48214 28783 28784 48215 28785 28786 48216 28787 28788 48217 28789 28790 48218 28791 28792 48219 28793 28794 48220 28795 28796 48221 28797 28798 48222

Inside Ø mm 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 11 11 11 11 11 11

Outside Ø Wall thickness mm mm 8 8 9 9 9 10 10 10 8 8 8 9 9 9 10 10 10 11 11 11 9 9 9 10 10 10 11 11 11 12 12 12 11 11 11 12 12 12 13 13 13 12 12 12 13 13 13 14 14 14 13 13 13 14 14 14

1 1 1.5 1.5 1.5 2 2 2 0.5 0.5 0.5 1 1 1 1.5 1.5 1.5 2 2 2 0.5 0.5 0.5 1 1 1 1.5 1.5 1.5 2 2 2 1 1 1 1.5 1.5 1.5 2 2 2 1 1 1 1.5 1.5 1.5 2 2 2 1 1 1 1.5 1.5 1.5

Unit m

Price EURO

15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25

177.00 265.00 84.00 193.00 288.00 88.00 201.00 301.00 83.00 198.00 283.00 80.00 178.00 267.00 84.00 184.00 275.00 93.00 204.00 301.00 88.00 193.00 288.00 88.00 193.00 289.00 90.00 199.00 296.00 94.00 206.00 306.00 90.00 199.00 296.00 94.00 206.00 305.00 94.00 206.00 305.00 94.00 206.00 305.00 94.00 206.00 305.00 97.00 213.00 319.00 97.00 213.00 319.00 100.00 218.00 327.00

Tubing - Silicone Tubing Item ​ 28799 28800 48223 28801 28802 48224 28803 28804 48225 28805 28806 48226 28807 28808 48227 28809 28810 48228

Inside Ø mm

Tubing made of Elastomers (Soft Rubber)

Outside Ø Wall thickness mm mm

12 12 12 12 12 12 13 13 13 13 13 13 14 14 14 14 14 14

14 14 14 16 16 16 15 15 15 17 17 17 16 16 16 18 18 18

Unit m

Price EURO

5 15 25 5 15 25 5 15 25 5 15 25 5 15 25 5 15 25

100.00 218.00 327.00 104.00 228.00 341.00 104.00 228.00 341.00 113.00 248.00 357.00 113.00 248.00 357.00 121.00 264.00 396.00

1 1 1 2 2 2 1 1 1 2 2 2 1 1 1 2 2 2

THOMAFLUID®-Silicone Pump Tubing imperial, platinum-catalyzed

Item ​

Inside Ø mm

Outside Ø mm

Unit1 m

Price EURO

4.8 3.2 3.2 6.4 6.4 7.9 7.9

9.5 6.4 6.4 9.5 9.5 11.1 11.1

15 1 15 1 15 1 15

285.00 46.00 247.00 46.00 257.00 64.00 361.00

971352 971361 971362 971371 971372 971381 971382 1

15-m-unit consists of 2 rolls Masterflex®, each with 7.5 m

Puri-Flex® Pump Tubing (based on silicone) Application area

• Biotechnology, pharmacy, food processing technology, laboratory technology

Product specification

• For high purity applications • Very durable and flexible, ideal for permanent use • Contains no DEHP phthalates or halogen plasticizers • Extraordinary tear and tensile strength, low gas-permeability • RoHS- and REACH-compliant, thermally weldable and sealable • Low particle release, good chemical resistance

Technical specification

Product specification

• Only high-grade platinum-catalyzed (addition cross-linked) silicone is used for production. Consequently, the product is „free of peroxides“ • Excellent biocompatibility, no additives or plasticizers are leached out, odorless and nontoxic, fungus-resistant • Very good at low temperatures • Resistant to weather, ozone, and radiation as well as corona-resistant • Excellent elasticity • Antiadhesive (repulsive) surface properties

• Material: based on silicone (Masterflex®-6419) • Colour: translucent • Shore hardness A: 68° • Temperature range: -50 to +135 °C • Sterilization: autoclavable (+135 °C); gas (ethylene oxide), gamma-rays • Regulations: FDA 21 §177.2600, USP Class VI, ISO 10993 Part 4 and Part 5, ISO 9001 ​

Technical specification

• Material: Silicone (silicone rubber, Masterflex®-6410) • Colour: translucent • Shore hardness A: 55° ±5° • Temperature range: -51 to +232 °C • Sterilization: autoclavable (+136 °C); hot air (+160 °C) • Regulations: FDA §177.2600, USP Class VI ​

Item

Item ​ 971331 971332 971341 971342 971351

Inside Ø mm

Outside Ø mm

Unit1 m

Price EURO

0.8 0.8 1.6 1.6 4.8

4 4 4.8 4.8 9.5

1 15 1 15 1

32.00 193.00 36.00 212.00 46.00

Inside Ø

​

mm

971501 971502 971511 971512 971521 971522 971531 971532 971541 971542 971551 971552

0.8 0.8 1.6 1.6 3.2 3.2 4.8 4.8 6.4 6.4 7.9 7.9

1

Air (+20 °C)

2

Outside Max. op. Max. Ø pressure1 flow rate liquids2 mm bar ml/min.

4 4 4.8 4.8 6.4 6.4 7.9 7.9 9.5 9.5 11.1 11.1

2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 1.4 1.4 1 1

36 36 130 130 480 480 1,000 1,000 1,700 1,700 2,300 2,300

Unit

Price

m

EURO

1 7.5 1 7.5 1 7.5 1 7.5 1 7.5 1 7.5

23.00 138.00 24.00 140.00 25.00 143.00 27.00 154.00 30.00 171.00 41.00 233.00

Water (+22 °C)

THOMAFLUID® II - 2015 13

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

THOMAFLUID®-High-Med-Silicone Pump Tubing tear- and tension-proof Application area

• Analytical technology, biotechnology, medical engineering, process engineering, food processing technology

Product specification

• Silicone peristaltic pump tubing are extruded from an especially highgrade silicone elastomer and are vulcanized. The cured goods do not contain any extractable constituents, they are completely odourless and tasteless, physiologically inert, and absolutely well tolerated by the body. Resistance to most organic solvents. The formulation meets the regulations of FDA § 177.2600, USP 20/21, BfR XV.

Technical specification

• Material: Silicone (silicone rubber) • Colour: translucent • Shore hardness A: 50° • Temperature range: -55 to +220 °C • Sterilization: autoclavable (+136 °C); hot air (+160 °C) • Density: 1.13 g/cm3 • Elongation at break: 600 % • Tearing strength: 10 MPa • Tear propagation resistance: 37 kN/m • Regulations: FDA § 177.2600; USP XX/XXI; BfR XV ​

Item ​ 11446 11447 11448 11449 11450 11451 11452 11453 11454 11455 11456 11457 11458 11459 11460 11461 11462 11463 11464 11465 11466 11467

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit m

EURO

0.5 0.5 0.5 0.8 1 1 1 1.5 1.5 1.6 2 2 2 2.5 2.5 3.2 3.2 3.2 3.2 3.2 4 4

1 1.5 3.7 4 2 3 5 2.5 3.5 4.8 3 4 4.5 3.5 4.5 4.8 5.2 6.4 7.2 9.5 6 7.2

0.25 0.5 1.6 1.6 0.5 1 2 0.5 1 1.6 0.5 1 1.25 0.5 1 0.8 1 1.6 2 3.2 1 1.6

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

123.00 137.00 196.00 211.00 159.00 127.00 228.00 151.00 158.00 187.00 174.00 181.00 183.00 184.00 184.00 186.00 189.00 257.00 279.00 444.00 265.00 266.00

14 THOMAFLUID® II - 2015

Price

Item ​ 11468 11469 11470 11471 11472 11473 11474 11475 11476 11477 11478 11479 11480 11481 11482 11483 11484 11485 11486 11487 11488 11489 11490 11491 11492 11493 11494 11495 11496 11497 11498 11499 11500 11501 11502 11504 11505

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

m

EURO

4 4.5 4.8 4.8 5 5 5 5.5 5.5 6 6 6 6.4 6.4 6.4 7.5 8 8 8 8 8 8.5 8.5 8.5 9 9 9 9.5 10 10 12.7 12.7 16 19 19 25.4 24.4

8 7.7 7.9 9.5 7 8.2 11.4 8.7 10.5 9.5 10 14 9.5 11.1 12.7 10.7 11.1 12 14.3 16 18 12.5 14.9 16.5 14 15.4 17 15.9 14 16.4 19.1 20.7 22.4 25.4 28.6 31.8 35

2 1.6 1.6 2.4 1 1.6 3.2 1.6 2.5 1.75 2 4 1.6 2.5 3.2 1.6 1.6 2 3.2 4 5 2 3.2 4 2.5 3.2 4 3.2 2 3.2 3.2 4 3.2 3.2 4.8 3.2 4.8

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

294.00 279.00 281.00 365.00 268.00 278.00 470.00 308.00 401.00 342.00 344.00 462.00 331.00 381.00 402.00 383.00 397.00 405.00 283.00 298.00 377.00 248.00 334.00 376.00 249.00 262.00 323.00 264.00 247.00 251.00 264.00 340.00 351.00 385.00 597.00 636.00 994.00

THOMAFLUID®-High-Pharm-Silicone Pump Tubing Standard Product specification

• Outstanding elastic behaviour • Excellent resistance to hot air and heat • Very good resistance to ozone, aging, and weather • Very good dielectric properties • Very good physiological properties • Antiadhesive surface • High permeability to gas • Good chemical resistance to synthetic, animal and vegetable oils, glycols, and certain solvents • Extruded from an especially high-grade silicone elastomer and vulcanized • Cured goods do not contain any extractable constituents • Completely odourless and tasteless, physiologically inert, and absolutely well tolerated by the body

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

Technical specification

• Material: Silicone (silicone rubber) • Colour: translucent • Shore hardness A: 55° ±5° (DIN 53 505) • Temperature range: -60 to +200 °C, for a short time +250 °C • Density: 1.15 ±0.02 g/cm3 (ISO 1183-1 A) • Sterilization: autoclavable (+136 °C); hot air (+200 °C); steam (+134 °C); gas (Formalin, ethylene oxide); gamma-rays • Tearing strength: 10 N/mm2 (DIN 53 504-S1) • Elongation at break: 510 % (DIN 53 504-S1) • Tear propagation resistance: 26 N/mm (ASTM D624 B) • Compression set: 44 % at +175 °C / 22 h (ISO 815-B) • Tolerance: DIN ISO 3302-1 E2 • Regulations: in accordance with BfR XV Silicone, FDA § 177.2600 and USP Class VI

Item ​ 13804 13805 13806 13807 13808 13809 13810 13811 13812 13813 13814

​

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

m

EURO

12.7 12.7 12.7 15.9 15.9 19 19 19 19 25.4 25.4

17.5 19 19 22.2 22.2 25.4 25.4 28.6 28.6 34.9 34.9

2.4 3.2 3.2 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8

10 5 10 5 10 5 10 5 10 5 10

310.00 192.00 361.00 220.00 407.00 248.00 463.00 369.00 683.00 458.00 849.00

THOMAFLUID®-High-Med-Silicone Tubing for Medical Engineering - platinum-vulcanized Application area

• Medicine, surgery, pharmacy, laboratory technology

Product specification

Item ​ 49828 49829 13785 13786 49830 49831 49832 49833 49834 49835 13787 13788 13789 13790 49836 49837 13791 13792 13793 13794 49838 49839 498950 498960 498970 498980 13799 13800 13801 13802 13803

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

m

EURO

0.8 0.8 1.6 1.6 1.6 1.6 3.2 3.2 4.8 4.8 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4 6.4 6.4 7.9 7.9 7.9 7.9 9.5 9.5 9.5 9.5 9.5 9.5 12.7

4 4 3.2 3.2 4.8 4.8 6.4 6.4 7.9 7.9 9.5 9.5 11.1 11.1 9.5 9.5 11.1 11.1 12.7 12.7 11.1 11.1 12.7 12.7 12.7 12.7 14.3 14.3 15.9 15.9 17.5

1.6 1.6 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 3.2 3.2 1.6 1.6 2.4 2.4 3.2 3.2 1.6 1.6 2.4 2.4 1.6 1.6 2.4 2.4 3.2 3.2 2.4

5 15 5 10 5 15 5 15 5 15 5 10 5 10 5 15 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

44.00 121.00 100.00 185.00 46.00 126.00 62.00 174.00 75.00 215.00 100.00 185.00 167.00 310.00 95.00 269.00 113.00 210.00 149.00 277.00 126.00 233.00 128.00 236.00 131.00 243.00 146.00 266.00 179.00 333.00 167.00

• Only high-grade platinum-catalyzed (addition cross-linked) silicone is used for production. Platinum crosslinked silicone is free of ingredients of animal origin and is often used in sterile process equipment because tubes made of this material have a smoother contact surface and a greater purity than the peroxyde and sulfur cross-linked.

During the production there are no byproducts such as benzoic acid, peroxides or ketones • Ultrapure, not toxic without peroxyde, absolutely free of smell and taste.

• Thermosensitive, immediately adapting to body temperature without decrease in lumen size.

• Very good physiological properties, biocompatible, Medically pure • Non-toxic, free from pyrogenes, compatible with blood (tolerated by blood).

• Antiadhesive (repulsive) surface properties.

• The nature of surface reduces the risk of damage to tissues and blood cells.

• Quality assurance according to ISO 9002/EN 29002.

Technical specification

• Material: platinum-vulcanized silicone • Colour: translucent • Shore hardness A: 60° ±5 • Temperature range: -60 to +200 °C • Density: 1.18 ±0.03 g/cm3 • Sterilization: autoclavable (+136 °C); hot air (+160 °C); steam (+134 °C at 2,5 bar) • Tensile strength: 11 N/mm2 (DIN 53504) • Elongation at break: >450 % (DIN 53504) • Tear propagation resistance: 42 kN/m (ASTM 624/A) • Compression set: 15 % bei +175 °C / 22 h / 25 % (DIN 53517) • Regulations: FDA §177.2600, USP XXVI Class VI, BfR XV, ISO 10993, European Pharmacopoeia (Ph. Eur.) 3.1.9 ​

THOMAFLUID® II - 2015 15

Tubing - Silicone Tubing Item ​ 339912 11425 339913 11426 339914 11427 339915 11428 339916 339753 339917 11429 339918 11430 339919 11431 339920 11432 339754 339755 339921 11433 339756 339757 11435 339758 11436 11437 11438 339759 11439 11440 11441 11442 11443 339760 11444 339761 11445 339762 339763

Tubing made of Elastomers (Soft Rubber)

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

m

EURO

1 1 1.5 1.5 2 2 3 3 3 3 3.2 3.2 3.2 3.2 4 4 4 4 4 4 4.8 4.8 5 6 6 6 6.4 6.4 6.4 7 7.9 8 8 9.5 10 12 12.7 15 15.9 18 20

3 3 3.5 3.5 4 4 5 5 7 7 4.8 4.8 6.4 6.4 6 6 7 7 8 12 7.9 7.9 8 9 10 12 9.5 11.1 12.7 10 11.1 12 14 15.9 14 16 19 21 22.2 24 26

1 1 1 1 1 1 1 1 2 2 0.8 0.8 1.6 1.6 1 1 1.5 1.5 2 4 1.6 1.6 1.5 1.5 2 3 1.6 2.4 3.2 1.5 1.6 2 3 3.2 2 2 3.15 3 3.15 3 3

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 5 5 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

77.00 128.00 112.00 186.00 96.00 160.00 106.00 176.00 204.00 339.00 125.00 208.00 219.00 364.00 125.00 208.00 229.00 381.00 216.00 386.00 154.00 256.00 176.00 192.00 264.00 440.00 288.00 339.00 387.00 224.00 313.00 320.00 379.00 389.00 368.00 440.00 507.00 570.00 553.00 580.00 650.00

THOMAFLUID®-High-Med-Silicone Tubing for Medical Engineering ​

16 THOMAFLUID® II - 2015

Application area

• Medical engineering, hospital technology, sterile technology, hygiene technology

Product specification

• Conveying tubing.

• Excellent resistance to heat and hot air.

• Highest flexibility in cold.

• Very good resistance to ozone, aging, and weather.

• Antiadhesive (repulsive) surface properties.

• Excellent elasticity.

• Very good physiological properties, biocompatible.

• The nature of surface reduces the risk of damage to tissues and blood cells.

• Non-toxic, free from pyrogenes, and compatible with blood (tolerated by blood).

• Medically pure.

• Thermosensitive, immediately adapting to body temperature without decrease in lumen size.

• High flexibility.

Technical specification

• Material: silicone rubber special compound MQV • Colour: translucent • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +200 °C; for a short period +250 °C • Density: 1.17 ±0.02 g/cm3 (ISO 1183-1 A) • Resistance to hot air: up to +200 °C • Sterilization: steam (+134 °C) • Max. operating pressure: depending on cross-section, wall thickness and application • Elongation at break: 480 % (DIN 53504-S1) • Tearing strength: 10.0 N/mm2 (DIN 53504-S1) • Tear propagation resistance: 35 N/mm (ASTM D624 B) • Compression set: 33 % at +175 °C / 22 h (ISO 815-B) • Tolerance: DIN ISO 3302-1 E2 • Regulations: in accordance with BfR XV Silicone; FDA § 177.2600 and USP Class VI Item ​ 10455 10456 10457 10458 10459 10460 10461 10462 10463 10464 10465 10466 10467 10468 10469 10470 10471 10472 10473 10474 10475 10476 10477

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

1 1 1 1 1 1 1.5 1.5 1.5 1.5 2 2 2 2 2 2 3 3 3 3 3 3 4

3 3 4 4 6 6 3.5 3.5 5.5 5.5 3 3 5 5 6 6 4 4 6 6 7 7 5

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

49.00 79.00 83.00 136.00 142.00 232.00 75.00 122.00 93.00 151.00 77.00 125.00 77.00 125.00 109.00 176.00 86.00 137.00 84.00 132.00 104.00 168.00 79.00

Tubing - Silicone Tubing Item ​ 10478 10479 10480 10481 10482 10483 10484 10485 10486 10487 10488 10489 10490 10491 10492 10493 10494 10495 10496 10497 10498 10499 10500 10501 10502 10503 10504 10505 10506 10507 10508 10509 10510 10511 10512 10513 10514 10515 10516 10517 10518 10519 10520 10521 10522 10523 10524 10525 10526 10527 10528 10529 10530 10531 10532 10533

Tubing made of Elastomers (Soft Rubber)

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10

5 7 7 8 8 6 6 8 8 9 9 8 8 9 9 10 10 11 11 12 12 9 9 10 10 11 11 12 12 13 13 10 10 11 11 12 12 13 13 14 14 11 11 12 12 13 13 14 14 15 15 12 12 14 14 15

10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

129.00 128.00 210.00 140.00 229.00 85.00 134.00 102.00 166.00 138.00 225.00 112.00 183.00 120.00 196.00 162.00 265.00 199.00 318.00 158.00 252.00 106.00 173.00 125.00 203.00 161.00 249.00 174.00 270.00 186.00 297.00 149.00 231.00 158.00 252.00 163.00 260.00 205.00 327.00 205.00 327.00 153.00 250.00 168.00 259.00 177.00 283.00 187.00 298.00 236.00 377.00 169.00 264.00 172.00 265.00 174.00

Item ​ 10534 10535 10536 10537 10538 10539 10540 10541 10542 10543 10544 10545 10546 10547 10548

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

10 10 10 12 12 12 12 12 12 14 14 14 14 14 14

15 16 16 14 14 16 16 18 18 16 16 18 18 20 20

10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

278.00 182.00 291.00 166.00 271.00 192.00 306.00 245.00 391.00 245.00 391.00 245.00 391.00 255.00 407.00

THOMAFLUID®-Silicone Pharma Colour-Coded Chemical Tubing Product specification

• Completely dyed pharma tubing according to the RAL colour chart of BfR IX. • Very good physiological properties, biocompatible.

• Non-toxic and free from pyrogenes.

• Thermosensitive, immediately adapting to body temperature without decrease in lumen size.

• Highest flexibility and elasticity.

• Excellent resistance to heat and hot air.

• Highest flexibility in cold.

• Very good resistance to ozone, aging, and weather.

• Antiadhesive (repulsive) surface properties.

• Very good dielectric properties.

• High permeability to gas.

• Tubing compound meets the production regulations of BfR XV Silicone and FDA § 177.2600.

Technical specification

• Material: Sl (silicone rubber) • Colour: blue, yellow, green, red, orange, violet, black, white • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +220 °C, for a short time +250 °C • Densitiy: 1.17 ±0.02 g/cm3 (ISO 1183-1 A) • Compression set: 33 % at +175 °C / 22 h (ISO 815-B) • Elongation at break: 500 % (DIN 53504-S1) • Tearing strength: 10.5 N/mm2 (DIN 53504-S1) • Sterilization: autoclavable (+136 °C); hot air (+200 °C); steam (+134 °C); gas (formalin, ethylene oxide); gamma-rays • Tolerance: DIN ISO 3302-1 E1/E2 • Regulations: FDA §177.2600; USP Class VI and BfR XV Silicone ​

THOMAFLUID® II - 2015 17

Tubing - Silicone Tubing Item ​ 14481 14482 14483 14484 14485 14486 14487 14488 14489 14490 14491 14492 14493 14494 14495 14496 14497 14498 14499 14500 14501 14502 14503 14504 14505 14506 14507 14508 14509 14510 14511 14512 14513 14514 14515 14516 14517 14518 14519 14520 14521 14522 14523 14524 14525 14526 14527 14528 14529 14530 14531 14532 14533 14534 14535 14536

Tubing made of Elastomers (Soft Rubber)

Inside Ø mm

Outside Ø mm

Colour ​

Unit m

Price EURO

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6

blue blue yellow yellow green green red red orange orange violet violet white white black black blue blue yellow yellow green green red red orange orange violet violet white white black black blue blue yellow yellow green green red red orange orange violet violet white white black black blue blue yellow yellow green green red red

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

90.00 149.00 90.00 149.00 90.00 149.00 90.00 149.00 90.00 149.00 90.00 149.00 90.00 149.00 90.00 149.00 98.00 164.00 98.00 164.00 98.00 164.00 98.00 164.00 98.00 164.00 98.00 164.00 98.00 164.00 98.00 164.00 108.00 179.00 108.00 179.00 108.00 179.00 108.00 179.00 108.00 179.00 108.00 179.00 108.00 179.00 108.00 179.00 121.00 197.00 121.00 197.00 121.00 197.00 121.00 197.00

18 THOMAFLUID® II - 2015

Item ​ 14537 14538 14539 14540 14541 14542 14543 14544 14545 14546 14547 14548 14549 14550 14551 14552 14553 14554 14555 14556 14557 14558 14559 14560 14561 14562 14563 14564 14565 14566 14567 14568 14569 14570 14571 14572 14573 14574 14575 14576 14577 14578 14579 14580 14581 14582 14583 14584 14585 14586 14587 14588 14589 14590 14591 14592

Inside Ø mm

Outside Ø mm

Colour ​

Unit m

Price EURO

4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

orange orange violet violet white white black black blue blue yellow yellow green green red red orange orange violet violet white white black black blue blue yellow yellow green green red red orange orange violet violet white white black black blue blue yellow yellow green green red red orange orange violet violet white white black black

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

121.00 197.00 121.00 197.00 121.00 197.00 121.00 197.00 133.00 215.00 133.00 215.00 133.00 215.00 133.00 215.00 133.00 215.00 133.00 215.00 133.00 215.00 133.00 215.00 146.00 238.00 146.00 238.00 146.00 238.00 146.00 238.00 146.00 238.00 146.00 238.00 146.00 238.00 146.00 238.00 162.00 264.00 162.00 264.00 162.00 264.00 162.00 264.00 162.00 264.00 162.00 264.00 162.00 264.00 162.00 264.00

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

THOMAFLUID®-High-Tech-Silicone Antista Chemical Tubing

THOMAFLUID®-Silicone Lumen Chemical Tubing double lumen

Product specification

Product specification

• A black coloured special tubing made of silicone according to formula IGB 50 in an electrically conducting compound mixture (siliconecarbon-compound), which guarantees the tubing to have absolutely conductive properties throughout. It is not a tubing fitted with a conductive carbon vein or core, but a 100 % homogenous compound consisting of silicone/graphite.

• The tubing is produced by addition of selected components, it is dyed black and it is extremely supple. The wall thickness is constant, the inner surface is absolutely smooth. The tubing is non-porous and of high tearing strength.

Technical specification

• Material: Silicone (MVQ), electrically conductive, platinum-cured • Shore hardness A: 50° and 70° ±5° resp. (DIN 53505) • Temperature range: -50 to +180 °C • Tearing strength: 6 MPa (DIN 53504) • Tear propagation resistance: 12 N/mm respectively (ASTM D624 B) The first-mentioned value of the following values refers to a shore hardness of 50° and the second value to a shore hardness of 70°.

• Density: 1.13 and 1.17 g/cm3 respectively (DIN 53479 A) • Elongation at break: 350 and 200 % respectively (DIN 53504-S1) • Volume Resistivity: 12 and 2 Ohm x cm respectively (VDE 0303) • Compression set: 25 % and 30 % respectively at +175 °C / 22 h (DIN 53517) • Each parameter was measured after vulcanization and annealing for 4 hrs at +200 °C in a circulating air furnace.

• Very good dielectric properties • Very good physiological properties • Very good resistance to ozone, aging, and weather • Good antiadhesive (repulsive) surface properties • High permeability to gas

Technical specification

• Material: Silicone (silicone rubber) • Colour: transparent • Shore hardness A: 70° ±5° • Temperature range: -55 to +300 °C, for a short time +350 °C • Sterilization: autoclavable (+136 °C) • Tolerance: DIN ISO 3302-1 E2 ​

138840

138920

​

Item ​

Item ​ 40586 40587 40588 40589 40590 40591 40592 40593 40594 40595 40596 40597

Inside Ø mm

Outside Ø mm

Shore hardness A ​

Unit

Price

m

EURO

2 2 2 7 7 7 2 2 2 7 7 7

4 4 4 9 9 9 4 4 4 9 9 9

50 50 50 50 50 50 70 70 70 70 70 70

5 10 30 5 10 30 5 10 30 5 10 30

75.00 128.00 312.00 126.00 220.00 542.00 75.00 128.00 312.00 126.00 220.00 542.00

138820 138830 138840 138850 138860 138870 138880 138890 138900 138910 138920 138930

Inside Ø mm

Outside Ø mm

Number of lumens ​

Unit

Price

m

EURO

0.8 0.8 1.3 1.3 1.6 1.6 2 2 3.2 3.2 4.5 4.5

4 4 10 10 6.5 6.5 8.1 8.1 8.8 8.8 16 16

2 2 2 2 2 2 2 2 2 2 2 2

5 15 5 15 5 15 5 15 5 15 5 15

77.00 208.00 141.00 376.00 90.00 238.00 90.00 238.00 95.00 248.00 185.00 499.00

THOMAFLUID®-Silicone Lumen Chemical Tubing multi-lumen Product specification

• Superelastic special tubing made of silicone for extreme applications, designed for a temperature constant load of +200 °C. The properties of the material do not change, even at such high temperatures.

• Silicone high temperature chemical tubing is extruded of an especially high-grade silicone elastomer and is vulcanized. The cured goods do not contain any extractable constituents, they are completely odourless and tasteless, physiologically inert, and absolutely well tolerated by the body.

THOMAFLUID® II - 2015 19

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

Technical specification

• Material: Silicone (silicone rubber) • Colour: transparent • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -55 to +200 °C, for a short time +250 °C • Density: 1.17 g/cm3 (DIN 53479) • Sterilization: autoclavable (+136 °C); hot air (+250 °C); steam (+136 °C); gas (formalin, ethylene oxide); gamma-rays • Tearing strength: 10.4 MPa • Elongation at break: 390 % (DIN 53504) • Tear propagation resistance: 20 N/mm (ASTM D624 B) • Dielectric strength: 20 kV/mm • Volume resistance: 4.2 x 1015 Ohm/cm3/+20 °C; 2.6 x 1013 Ohm/cm3/+130 °C; 5.2 x 1012 Ohm/cm3/+180 °C • Dielectric constant: 3.2 / +20 °C / 800 Hz; 2.9 / +180 °C / 800 Hz; 2.9 / +180 °C / 800 Hz • Tolerance: DIN ISO 3302-1 E2 (DIN 7715 E2)

Technical specification

• Material: Silicone (silicone rubber) • Colour: transparent, blue • Shore hardness A (wall): 60° • Shore hardness A (coil): 80° • Temperature range: -55 to +200 °C, for a short time +250 °C • Sterilization: hot air (+250 °C); steam (+135 °C at 2.2 bar); gas (ethylene oxide); gamma-rays • Suitable for gas: yes • Inside surface: smooth • Tolerance: DIN ISO 3302-1 E2 • Connection adapter: tubing inside Ø 9 mm: nominal width 10 tubing inside Ø 19 mm: nominal width 22 ​

​

Item ​

Item ​ 293631 293641 293651 293661 293671 293681 293691 293701

Outside Ø mm

Design ​

Unit m

Price EURO

8.8 8.8 8.8 8.8 10 10 10.5 10.5

without jacket without jacket without jacket without jacket braided braided braided braided

5 15 5 15 5 15 5 15

202.00 407.00 192.00 387.00 202.00 407.00 213.00 422.00

THOMAFLUID®-High-Tech-Silicone Spiral Tubing Application area

• Analytical technology, process engineering, respiration engineering, inhalation technology, medical engineering, laboratory technology

Product specification

• High-tech silicone spiral tubing is extruded of an especially high-grade silicone elastomer and is vulcanized. The cured goods do not contain any extractable constituents, and they are completely odourless and tasteless, physiologically inert and absolutely well tolerated by the body. Resistant to most organic solvents. The formulation meets the regulations of BfR XV, DAB 9, FDA § 177.2600, and USP XXI.

20 THOMAFLUID® II - 2015

42318 42319 42320 42321 42322 42323 42324 42325 42326 42327 42328 42329 42330 42331 42332 42333 42334 42335 42349 42353 42354 42355 42356 42357 42358 42359 42982 42983 42984 42985 42986 42987

Inside Ø mm

Design ​

Unit m

Price EURO

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 19 19 19 19 19 19 19 19 19 19 19 19 19 19

with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter without adapter without adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter with adapter

0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 1.6 2 0.3 0.4 0.45 0.6 0.8 0.85 0.9 1 1.1 1.2 1.3 1.4

39.00 44.00 50.00 55.00 61.00 66.00 71.00 76.00 81.00 86.00 91.00 99.00 104.00 109.00 113.00 118.00 123.00 129.00 95.00 121.00 51.00 56.00 60.00 68.00 79.00 83.00 86.00 91.00 97.00 104.00 110.00 116.00

Tubing - Silicone Tubing Item ​

Tubing made of Elastomers (Soft Rubber)

Inside Ø mm

Design ​

Unit m

Price EURO

19 19 19 19

with adapter with adapter with adapter with adapter

1.5 1.6 1.8 2

122.00 127.00 139.00 152.00

42988 42989 42991 42993

RCT®-Accessories: Profile Connector made of Stainless Steel Application area

• Connecting and coupling of THOMAFLUID®-Heat Exchanger Profile Tubing ​

THOMAFLUID®-Silicone Heat Exchanger Profile Tubing Application area

• Cooling, heating, and warming of reaction flasks, chromatography columns and troughs, cultivation vessels, measuring set-ups.

Product specification

• Elastic, thermoconductive special tubing with optimized circular segment profile, for winding around all kinds of equipment, and with connecting pieces fitting to the tubing connection of thermostats and other thermomedia conveying systems. Pressure- and temperatureloadable, high thermal conductivity due to special polymer formulations and large effective contact surfaces.

• Width of contact surface (width of bottom) alternatively 8, 15 or 30 mm, length 6 m each.

• Optionally, special connecting pieces for coupling of heat exchanger tubing of equal dimensions (items 43906 to 439081).

• Suitable for water, steam, cooling brine, lower and higher alcohols (such as methanol, ethanol, and glycols) as well as for motor oils. Not suitable for halogenated and aromatic hydrocarbons.

Item ​

Technical specification

• Material: silicone rubber • Colour: red • Temperature range: -50 to +200 °C

Width of bottom mm

43906

8

439061

8

43907

15

439071

15

43908

30

439081

30

Connection type ​ Nozzle (NW 4) with int. thread 1/4“ Double nozzle (NW 4) Nozzle (NW 8) with int. thread 1/2“ Double nozzle (NW 8) Nozzle (NW 15) with int. thread 1“ Double nozzle (NW 15)

Unit piece

Price EURO

2

30.00

2

26.00

2

30.00

2

26.00

2

30.00

2

26.00

THOMAFLUID®-Silicone Vacuum Chemical Tubing

​

Application area

• Vacuum chemical tubing meeting highest requirements in laboratories, pilot and production plants.

Product specification

• Special chemical vacuum tubing with outstanding mechanical and chemical properties. It is chemically neutral, toxicologically and physiologically safe, resistant to ozone and atmospheric cracking.

Embrittlement occurs at approx. -70 °C.

Technical specification Item ​ 43909 43903 43910 43904 43911 43905 1

at +20 °C

Material

Max. op. pressure1 bar

Unit

​

Width of bottom mm

Price

m

EURO

silicone silicone silicone silicone silicone silicone

8 8 15 15 30 30

1.5 1.5 1.5 1.5 1.5 1.5

2 6 2 6 2 6

94.00 208.00 156.00 346.00 289.00 642.00

• Material: Silicone (silicone rubber) • Colour: natural • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +200 °C, for a short time +250 °C • Tolerance: DIN ISO 3302-1 E2 • Rebound elasticity: 35 % (DIN 53512) • Density: 1.75 g/cm3 • Sterilization: hot air (+200 °C); steam (+136 °C) • Resistance to atmospheric cracking: good • Max. operating pressure: depending on nominal width, wall thickness and application up to 4 bar • Vacuum strength: depending on nominal width, wall thickness and application up to 15 Torr • Elongation at break: 600 % (DIN 53504-S2) • Tear propagation resistance: 20 N/mm (ASTM D624 B) • Dielectric constant: 2.9 at 50 Hz (VDE 0303) • Dielectric strength: 23 kV/mm (VDE 0303); measured with tubing of wall thickness 1 mm at 50 Hz • Volume Resistivity: 1015 Ohm x cm • Tensile strength: 10 N/mm2 (DIN 53504-S2)

​

THOMAFLUID® II - 2015 21

Tubing - Silicone Tubing

Item ​ 28250 28251 28252 28253 28254 28255 28256 28257 28258 28259 28260 28261 28262 28263 28264 28265 28266

Tubing made of Elastomers (Soft Rubber)

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

3 3 4 4 5 5 6 6 7 7 7 7 7 8 8 10 12

9 9 12 12 15 15 12 12 13 13 15 15 17 16 18 20 22

5 15 5 15 5 15 5 15 5 15 5 15 15 20 15 15 15

102.00 213.00 153.00 305.00 237.00 477.00 153.00 322.00 177.00 372.00 266.00 531.00 587.00 808.00 606.00 646.00 690.00

Item ​

mm

334053 334054 334055 334056 334057 334058 334059 334060 334061 334062 334063 334064 334065 334066 334067 334068 334069 334070 334071 334072 334073 334074 334075 334076

6.4 6.4 6.4 8 8 8 9.5 9.5 9.5 12.7 12.7 12.7 15.9 15.9 15.9 19 19 19 22.2 22.2 22.2 25.4 25.4 25.4

THOMAFLUID®-Silicone High-Temperature Pharmaceutical Pressure Tubing - flexible Application area

• On fermenters in the biotechnology, overall food processing industry and pharmaceutical industry

Product specification

• Highly flexible pharmaceutical tubing • Outstanding temperature resistance • Excellent resistance to hot air • Good resistance to cold • Very good resistance to ozone, aging, and weather • Very good dielectric properties • Physiologically absolutely safe • Non-toxic • Pyrogen-free and compatible with blood (tolerated by blood)

Inside Ø

1

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 13.1 13.1 13.1 15.1 15.1 15.1 16.7 16.7 16.7 20.3 20.3 20.3 24.5 24.5 24.5 28 28 28 31.4 31.4 31.4 34.5 34.5 34.5

8.5 8.5 8.5 8 8 8 7.5 7.5 7.5 7 7 7 6 6 6 5 5 5 3.5 3.5 3.5 3 3 3

38 38 38 40 40 40 45 45 45 50 50 50 65 65 65 75 75 75 90 90 90 100 100 100

Unit

Price

m

EURO

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5

78.00 210.00 310.00 80.00 242.00 360.00 94.00 252.00 376.00 142.00 382.00 568.00 154.00 420.00 622.00 162.00 440.00 654.00 174.00 462.00 682.00 190.00 510.00 748.00

at +100 °C

THOMAFLUID®-High-Med-Silicone Pharmaceutical and Pressure Tubing with Fabric Insert of Glass Silk ​

Technical specification

• Material: Silicone (silicone rubber special compound according to GMP) • Colour: milky-transparent • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -40 to +150 °C • Insert: coarse-meshed PETP-braiding • Sterilization: saturated steam (+136 °C) • Design: absolutely smooth (inside and outside) • Regulations: FDA 21 §177.2600; USP Class VI; European Pharmacopoeia and NSF 51 ​

22 THOMAFLUID® II - 2015

Product specification

• Flexible silicone pressure tubing with multifil fabric insert of glass silk • Very good resistance to temperature • Excellent resistance to hot air • Good resistance to cold

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

• High chemical resistance • Very good resistance to ozone, aging, and weather • Very good dielectric properties • Physiologically safe • Non-toxic, free from pyrogenes, compatible with blood (tolerated by blood)

Technical specification

• Material: Silicone (silicone rubber) • Colour: translucent • Shore hardness A: 70° ±5° (DIN 53505) • Temperature range: -60 to +200 °C, for a short time +250 °C • Density: 1.18 ±0.02 g/cm3 (ISO 1183-1 A) • Tensile strength: 10.7 N/mm2 (DIN 53504-S1) • Elongation at break: 460 % (DIN 53504-S1) • Tear propagation resistance: 23 N/mm (ASTM D624 B) • Rebound elasticity: 38 % (DIN 53512) • Compression set: 48 % at +175 °C / 22 h (DIN 53517) • Sterilization: hot air (+200 °C); steam (+134 °C at 2.5 bar) • Tolerance: DIN ISO 3302-1 E2 • Regulations: FDA § 177.2600; USP XXI and BfR XV Silicone Item

Inside Ø

​

mm

11544 11545 11546 11547 11548 11549 11550 11551 11552 11553 11554 11555 11556 11557 11558 11559 11560 11561 11562 11563 11564 11565

3 3 4 4 5 5 6 6 8 8 10 10 12.5 12.5 14 14 16 16 19 19 25 25

1

Outside Max. op.

Min. Unit Ø pressure1 bending radius mm bar mm m 9 9 10 10 11 11 12 12 15 15 17 17 19.5 19.5 22 22 26 26 30 30 37 37

20 20 20 20 15 15 13 13 10 10 9 9 9 9 7.5 7.5 7.5 7.5 7.5 7.5 5 5

10 10 10 10 15 15 15 15 28 28 38 38 50 50 50 50 60 60 60 60 100 100

• Physiologically safe • Non-toxic, free from pyrogenes, compatible with blood • Absolutely suitable for food meeting the conformity regulations

Technical specification

• Material: Si (silicone rubber, platinum-cured) • Colour: milky-transparent, smooth • Design: four PETP braidings, one stainless steel spiral • Temperature range: -50 to +150 °C • Sterilization: saturated steam (+136 °C) • Max. operating pressure: 12 to 14 bar at +100 °C, depending on type • Vacuum strength: 99.9 % at +100 °C • Regulations: FDA 21 CFR 177.2600, USP Class VI as well as European Pharmacopoeia ​

Price EURO

5 121.00 15 305.00 5 131.00 15 328.00 5 146.00 15 361.00 5 162.00 15 392.00 5 208.00 15 509.00 5 233.00 15 588.00 5 264.00 15 660.00 5 335.00 15 831.00 5 392.00 15 975.00 5 476.00 15 1,189.00 5 596.00 15 1,486.00

at +20 °C

Item

Inside Ø

​

mm

340968 340969 340970 340971 340950 340951 340952 340953

25.4 25.4 31.7 31.7 38.1 38.1 50.8 50.8

1

Outside Max. op.

Min. Unit Ø pressure1 bending radius mm bar mm m 34.6 34.6 40.9 40.9 47.3 47.3 60 60

14 14 14 14 14 14 12 12

127 127 165 165 203 203 280 280

1 3 1 3 1 3 1 3

Price EURO 404.00 1,214.00 506.00 1,350.00 562.00 1,486.00 766.00 2,026.00

at +100 °C

THOMAFLUID®-Silicone Pressure Tubing - flexible Product specification

• Extremely flexible pressure tubing, also in the cold.

• The jacket is tightly vulcanized on the core tubing and impregnated with silicone rubber.

• Good resistance to ozone, aging, and weather.

• Antiadhesive surface properties. ​

THOMAFLUID®-High-Pharm-Silicone Pressure and Vacuum Tubing Application area

• Pharmaceutical industry, food industry, vacuum technology, biotechnology

Product specification

• Very flexible suction and pressure tubing for media of highest purity • Absolute pharmaceutical quality • Highest temperature resistance • Good resistance to cold • High chemical resistance • Very good resistance to ozone, aging, and weather

THOMAFLUID® II - 2015 23

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

Technical specification

• Material: Silicone (silicone rubber) • Colour: milky-transparent • Temperature range: -50 to +180 °C, for a short time +250 °C • Insert: a layer of glass silk braiding • Design: inside smooth, milky and bordered; outside silicone impregnation Item ​

mm

12449 12450 12451 12452 12453 12454 12455 12456 12457 12458 12459 12460 1

Inside Ø

4 4 5 5 6 6 8 8 10 10 13 13

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 8 8 9 9 10 10 12 12 14 14 18 18

10 10 10 10 10 10 10 10 10 10 10 10

30 30 35 35 40 40 45 45 50 50 60 60

Unit

Price

m

EURO

5 10 5 10 5 10 5 10 5 10 5 10

87.00 144.00 98.00 159.00 105.00 202.00 143.00 238.00 172.00 284.00 246.00 417.00

at +20 °C

THOMAFLUID®-Silicone High-Temperature Chemical Pressure Tubing - steel wire braiding

Item

Inside Ø

​

mm

334049 334050 334051 334052 1

10 13 13 13

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 16 19 19 19

8 8 8 8

50 70 70 70

Unit

Price

m

EURO

5 1 3 5

208.00 62.00 168.00 248.00

at +160 °C

THOMAFLUID®-Silicone High-Temperature Chemical Pressure Tubing with Fabric Insert Product specification

• Special tubing made of silicone (Silicone) for extreme applications with a strong braiding of highly heat-resistant glass silk, which renders the tubing (silicone core tubing) highly stable at high pressures and protects it optimally against kinking. The diamond pattern formed by the braiding angle guarantees an excellent adhesion of the silicone core tubing to the silicone jacket. Additionally, the silicone jacket protects the braiding from damage and soiling.

• Silicone high temperature chemical tubing is extruded of an especially high-grade silicone elastomer and vulcanized. The cured goods do not contain any extractable constituents, they are completely tasteless and odourless, physiologically inert and absolutely well tolerated by the body.

Technical specification

Product specification

• Extremely robust and flexible pressure tubing • High flexibility also in the cold • Suitable for permanent high temperature applications • Good dielectric properties • Antiadhesive surface properties • Very good resistance to ozone, aging, and weather • Non-toxic, pyrogen-free

Technical specification

• Material: Silicone (silicone rubber) • Colour: inside milky-transparent, outside silver • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -50 to +190 °C, for a short time +250 °C • Bursting pressure: 45 bar at +20 °C • Insert: inside glass silk braiding, outside zinc-plated steel wire braiding ​

• Silicone core tubing: Shore hardness A: 60° ±5° Colour: transparent (inside), red (outside) Temperature range: Class H and above up to +180 °C Specific weight: 1.75 Elongation at break: up to 300 % without fissures Embrittlement temperature: -60 °C Dielectric strength: 10 kV/1.0 mm wall thickness; (50 Hz/+20 to +180 °C) after water bath Volume Resistivity: 4.2 x 1015 Ohm/cm3/+20 °C; 2.6 x 1013 Ohm/cm3/+130 °C; 5.2 x 1012 Ohm/cm3/+180 °C Dielectric constant: 3.2/+20 °C/800 Hz; 2.9/+180 °C/800 Hz • Tolerance: DIN ISO 3302-1 • Silicone jacket: Colour: red Jacket: fused with silicone core tubing Insert: glass silk (up to +200 °C) ​

Item ​ 334047 334048

Inside Ø mm 10 10

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 16 16

24 THOMAFLUID® II - 2015

8 8

50 50

Unit

Price

m

EURO

1 3

52.00 140.00

Item ​ 28515 28516

Inside Ø mm

Outside Ø mm

Bursting pressure1 bar

Unit

Price

m

EURO

3 3

8 8

60 60

5 15

97.00 223.00

Tubing - Silicone Tubing Item ​ 28517 28518 28519 28520 28521 28522 28523 28524 28525 28526 28527 28528 28529 28530 28531 28532 28533 28534 28535 28536 28537 28538 28541 28542 28543 28544 28545 28546 49656 49657 28547 49622 49623 28548 49658 49659 28549 49626 49627 28550 49666 49667 28683 49668 49669 28684 49670 49671 28685 49628 49629 28688 1

at +20 °C

Tubing made of Elastomers (Soft Rubber) Price

THOMAFLUID®-Silicone Cooler Tubing

m

EURO

Product specification

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 1 3 10 1 3 10 1 3 10 1 3 10 1 3 10 1 3 10 1 3 10 1 3 10

107.00 245.00 115.00 254.00 126.00 264.00 132.00 269.00 137.00 287.00 142.00 295.00 147.00 303.00 166.00 331.00 171.00 341.00 183.00 366.00 188.00 381.00 198.00 409.00 203.00 419.00 271.00 597.00 105.00 310.00 625.00 118.00 317.00 669.00 144.00 355.00 722.00 149.00 399.00 753.00 156.00 402.00 780.00 161.00 420.00 840.00 173.00 434.00 902.00 178.00 438.00 954.00

Inside Ø mm

Outside Ø mm

Bursting pressure1 bar

Unit

4 4 5 5 6 6 6 6 6 6 7 7 8 8 8.5 8.5 9.5 9.5 9.5 9.5 10 10 12 12 12.5 12.5 14 14 15 15 15 16 16 16 18 18 18 19 19 19 20 20 20 22 22 22 24 24 24 25 25 25

9 9 10 10 11.5 11.5 12 12 12.5 12.5 13 13 14 14 16 16 16 16 17 17 18 18 20 20 20.5 20.5 23 23 24 24 24 25.5 25.5 25.5 29.5 29.5 29.5 30.5 30.5 30.5 31.5 31.5 31.5 33.5 33.5 33.5 35.5 35.5 35.5 37 37 37

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 35 35 35 35 30 30 30 30 30 30 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 25 25 15 15 15 15 15 15 15 15 15

• Special silicone compound for hot water applications in engine and vehicle construction, heating engineering, and air-conditioning technology.

• Pressure tubing for hot water applications.

• Highest flexibility in cold.

• Highest resistance to ozone, aging, and weather.

• Good dielectric properties.

• Antiadhesive surface properties.

• Good elastic behaviour.

Technical specification

• Material: silicone, MVQ (polysiloxane) • Colour: inside red, outside green • Temperature range: -54 to +177 °C • Insert: PA-braiding • Design: inside and outside smooth, fabric imprint ​

Item ​ 12485 12486 12487 12488 12489 12490 12491 12492 12495 12496 12497 12498 12499 12500 12501 12502 12503 12504 12505 12506 12507 12508 12509 12510 12511 12512 12513

Inside Ø mm 8 8 10 10 13 13 16 16 19 19 22 22 25 25 28 28 32 32 35 35 38 38 41 41 45 45 51

Outside Max. op. Number Unit Ø pressure1 of inserts mm bar ​ m 18 18 20 20 23 23 26 26 29 29 32 32 35 35 36 36 40 40 43 43 46 46 49 49 53 53 59

4.5 4.5 4 4 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 5.5 5.5 5 5 5 5 5 5 4.5 4.5 4.5 4.5 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3

1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 2 1 2 1 2 1 2 1 2 1 2 1

Price EURO 77.00 192.00 82.00 208.00 90.00 223.00 105.00 254.00 136.00 325.00 144.00 364.00 149.00 371.00 190.00 337.00 192.00 345.00 197.00 358.00 210.00 376.00 215.00 384.00 220.00 392.00 233.00

THOMAFLUID® II - 2015 25

Tubing - Silicone Tubing Item ​

Inside Ø mm

12514 12515 12516 12517 12518 12519 12520 12521 12522 12523 12524 12525 12526 1

51 54 54 57 57 60 60 64 70 76 83 89 102

Tubing made of Elastomers (Soft Rubber)

Outside Max. op. Number Unit Ø pressure1 of inserts mm bar ​ m 59 62 62 65 65 68 68 72 78 84 91 97 110

4 4 4 3.5 3.5 3 3 3 2.5 2 2 1.5 1

3 3 3 3 3 3 3 3 3 3 3 3 3

2 1 2 1 2 1 2 1 1 0.5 0.5 0.5 0.5

Price

Item

EURO

​

412.00 241.00 427.00 251.00 466.00 271.00 484.00 286.00 305.00 187.00 220.00 231.00 279.00

at +100 °C

THOMAFLUID®-Silicone Turbocharger Tubing

Inside Ø mm

49474 49475 49476 49477 1

54 60 64 70

Outside Max. op. Bursting Unit Ø pressure1 pressure1 mm bar bar m 59.5 65.5 69.5 75.5

2.5 2.5 2.5 2

24 22 22 19

Price EURO

1 1 1 1

364.00 394.00 417.00 479.00

at +20 °C

THOMAFLUID®-High-Tech-Silicone Insulating Tubing Product specification

• Silicone foam tubing for thermal insulation with lowest thermal conductivity • High reduction of energy loss • Extremely flexible • Fine-pored closed cells with skin (inside and outside) • Good elongation at break • Strong elastic force

Technical specification

Application area

• Production engineering, process engineering, machine engineering, process technology, hot air appliances, turbocharger

Product specification

• Material: silicone rubber (foamed, closed-cell) • Colour: red-brown • Shore hardness A: 15° ±5° • Temperature range: -50 to +200 °C • Density: 0.25 g/cm3

​

• Special pressure tubing • Excellent resistance to heat and hot air • Highest flexibility in cold • Good resistance to ozone, aging, and weather • Good dielectric properties • Antiadhesive surface properties • Good elastic behaviour

Technical specification

• Material: silicone, MVQ (polysiloxane) • Colour: red • Shore hardness A: 55° ±5° • Temperature range: -65 to +260 °C • Insert: glass silk fabric • Design: inside and outside smooth

Item ​

​

Item ​ 49468 49469 49470 49471 49472 49473

Inside Ø mm 25 32 38 41 44 51

Outside Max. op. Bursting Unit Ø pressure1 pressure1 mm bar bar m 30.5 37.5 43.5 46.5 49.5 56.5

26 THOMAFLUID® II - 2015

4 3.5 3.5 3.5 3.5 3

34 32 31 31 28 25

1 1 1 1 1 1

Price EURO 225.00 251.00 282.00 300.00 315.00 348.00

338717 338718 338719 338720 338721 338722 338723 338724 338725 338726 338727 338728 338729 338730 338731 338732 340805 340806

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

m

EURO

8 8 8 8 12 12 15 15 20 20 22 22 25 25 28 28 30 30

16 16 24 24 28 28 35 35 40 40 42 42 45 45 48 48 50 50

4 4 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

175.00 420.00 200.00 480.00 262.00 630.00 325.00 780.00 348.00 814.00 360.00 840.00 416.00 972.00 450.00 1,050.00 484.00 1,164.00

Tubing - Silicone Tubing

Tubing made of Elastomers (Soft Rubber)

THOMAFLUID®-High-Tech-Silicone Hot Air Tubing

Item

Product specification

​ 330236 330237 330238 330239 330240 330241 330242 330243 330244 330245 330246 330247 330248 330249 330250 330251 330252 330253 330254 330255

• Highest flexibility and elasticity at constant mechanical strength.

• Robust type.

• Suitable for vacuum applications.

• Good abrasion resistance.

• Even at highest temperatures, no changes occur in the properties of material.

• Tubing made of an especially high-grade silicone-coated glass fabric.

• Good resistance to ozone, aging, and weather.

• Fitted with inlying spiral made of zinc-plated spring steel.

Technical specification

• Material: silicone-coated glass fabric • Colour: red • Temperature range: -85 to +310 °C • Insert: inlying spring spiral • Option: ex factory extension of the max. production units (4 m) possible by splicing ​

1

Inside Ø

Vacuum1

Unit

mm

Max. op. pressure1 bar

Price

mWC

m

EURO

76 76 76 83 83 83 89 89 89 95 95 95 102 114 127 152 178 203 254 305

1 1 1 1 1 1 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.8 0.8 0.6 0.6 0.5 0.4 0.1

3.5 3.5 3.5 3 3 3 2.9 2.9 2.9 2.7 2.7 2.7 2.6 2.1 1.7 1.4 1 0.7 0.5 0.3

1 2 4 1 2 4 1 2 4 1 2 4 4 4 4 4 4 4 4 4

178.00 286.00 428.00 184.00 294.00 440.00 186.00 298.00 444.00 190.00 302.00 454.00 454.00 466.00 608.00 608.00 852.00 944.00 1,128.00 1,288.00

at +20 °C

THOMAFLUID®-High-Tech-Silicone Jacket Hot Air Tubing - double-wall Item ​ 330209 330210 330211 330212 330213 330214 330215 330216 330217 330218 330219 330220 330221 330222 330223 330224 330225 330226 330227 330228 330229 330230 330231 330232 330233 330234 330235

Inside Ø

Vacuum1

Unit

Price

mm

Max. op. pressure1 bar

mWC

m

EURO

13 13 13 19 19 19 25 25 25 32 32 32 38 38 38 44 44 44 51 51 51 63 63 63 70 70 70

1.8 1.8 1.8 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.2 1.2 1.2 1.2 1.2 1.2 1.1 1.1 1.1 1.1 1.1 1.1

5.8 5.8 5.8 5.3 5.3 5.3 5.3 5.3 5.3 5 5 5 5 5 5 4.4 4.4 4.4 4.4 4.4 4.4 4 4 4 3.5 3.5 3.5

1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4

130.00 208.00 312.00 140.00 224.00 336.00 146.00 234.00 352.00 150.00 242.00 360.00 156.00 250.00 374.00 164.00 258.00 386.00 166.00 262.00 392.00 172.00 274.00 410.00 174.00 278.00 418.00

Product specification

• Highest flexibility and elasticity at constant mechanical strength.

• Good abrasion resistance.

• Robust type.

• Even at highest temperatures, no changes occur in the properties of material.

• Suitable for vacuum applications.

• Tubing made of an especially high-grade silicone-coated glass fabric.

• Good resistance to ozone, aging, and weather.

• Fitted with inlying spiral made of zinc-plated spring steel and additional inner liner.

Technical specification

• Material: silicone-coated glass fabric • Colour: red • Temperature range: -85 to +310 °C • Insert: inlying spring spiral and additional inner liner (inner jacket).

Thus, the tubing is smooth inside.

• Option: ex factory extension of the max. production units (4 m) possible by splicing ​

THOMAFLUID® II - 2015 27

Tubing - TPEE Tubing Item ​

mm

Max. op. pressure1 bar

330256 330257 330258 330259 330260 330261 330262 330263 330264 330265 330266 330267 330268 330269 330270 330271 330272 330273 330274 330275 330276 330277 330278 330279 330280 330281 330282 330283 330284 330285 330286 330287 330288 330289 330290 330291 330292 330293 330294 330295 330296 330297 330298 330299

19 19 19 25 25 25 32 32 32 38 38 38 44 44 44 51 51 51 63 63 63 70 70 70 76 76 76 83 83 83 89 89 89 95 95 95 102 114 127 152 178 203 254 305

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2 2 2 1.8 1.7 1.5 1.1 0.8 0.6 0.4 0.2

1

Inside Ø

Tubing made of Elastomers (Soft Rubber)

at +20 °C

Vacuum1

Unit

Price

mWC

m

EURO

7 7 7 7 7 7 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.3 5.3 5.3 4.6 4.6 4.6 4.6 4.6 4.6 4.4 4.4 4.4 4 4 4 4 4 4 4 4 4 3.5 2.8 2.1 1.7 1.4 1 0.7 0.5

1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 4 4 4 4 4 4 4 4

156.00 256.00 366.00 158.00 256.00 366.00 158.00 256.00 366.00 168.00 276.00 404.00 180.00 294.00 430.00 180.00 294.00 430.00 196.00 314.00 472.00 210.00 334.00 502.00 222.00 356.00 534.00 232.00 372.00 564.00 232.00 372.00 564.00 258.00 412.00 620.00 650.00 682.00 766.00 866.00 1,056.00 1,172.00 1,576.00 1,804.00

TPEE Tubing THOMAFLUID®-High-Tech-TPEE Chemical Tubing calibrated Application area

• Chemical and process engineering, measurement and control engineering, for compressed air at higher temperatures, vacuum technology, hydraulic and pneumatic applications.

Product specification

• High mechanical stability • High abrasion resistance • High elasticity • Best bending and tearing strength • Excellent flexibility at room and low temperatures • High pressure resistance with good flexibility • Kink resistance • Free of plasticizers • Best pressure utilization factor at higher temperatures • More temperature-resistant than standard pneumatic tubing • High resistance to swelling in oils, aliphatic and aromatic hydrocarbons at mean temperatures • Good chemical resistance equal to that of polyurethane

Technical specification

• Material: TPEE (polyester-rubber) (thermoplastic polyether ester elastomer) • Colour: ivory • Shore hardness D: 63° (DIN 53505) • Temperature range: -40 to +120 °C, for a short time +160 °C • Density: 1.20 g/cm3 (DIN 53479) • Tolerances outside Ø: ±0.10 mm ​

Item ​

28 THOMAFLUID® II - 2015

mm

330047 330048 330049 330050 330051 330052 330053 330054 330055 330056 1

Inside Ø

at +20 °C

2 2 4 4 6 6 8 8 10 10

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 4 4 6 6 8 8 10 10 14 14

20 20 18 18 10 10 8 8 10 10

20 20 30 30 40 40 60 60 80 80

Unit

Price

m

EURO

5 15 5 15 5 15 5 15 5 15

116.00 290.00 118.00 298.00 122.00 304.00 124.00 312.00 150.00 374.00

Tubing - TPEE Tubing

Tubing made of Elastomers (Soft Rubber)

THOMAFLUID®-TPEE/PVC Pharmaceutical Composite and Particle Tubing Product specification

• Pharmaceutical applications, particle conveyance and usable as gas measuring tubing.

• Liner is inert and neutral, tasteless and odourless.

• Liner does not absorb liquids.

• Liner meets the requirements of FDA, USDA, National Formulary, and the USP-Standards for food, beverages, pharmaceutical products, laboratory and medical equipment.

• Non-toxic.

• Jacket is resistant to abrasion and has very good resistance to aging.

• Liner contains neither plasticizers nor vinyl chloride.

Technical specification

• Material: TPEE (thermoplastic copolyester on polyisoprene base) • Colour: amber-coloured • Shore hardness A: 40° ±5° • Temperature range: -35 to +90 °C • Density: 1.0 g/cm3 • Tensile strength: >6 MPa (ISO 527) • Elongation at break: 500 % (ISO 815 B) • Compression set: at 24 h / +70 °C: 49 %, at 72 h / +23 °C: 20 % • Tolerance: DIN ISO 3302-1 E2 • Regulations: conforming to FDA/BGA

​

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

4.4 4.4 6.4 6.4 9.5 9.5

6.4 6.4 9.5 9.5 12.7 12.7

5 15 5 15 5 15

69.00 180.00 133.00 346.00 159.00 413.00

THOMAFLUID®-TPEE Food and Pharmaceutical Tubing Application area

Technical specification

Item

​

28057 28058 28061 28062 28063 28064

• Very high elasticity, high tensile strength • Very high abrasion resistance, very good resistance to aging • Suitable for food, absolutely free of latex

​

• Material: Liner: HYTREL® (thermoplastic copolyester) Jacket: PVC (polyvinyl chloride) • Colour: black • Temperature range: -35 to +120 °C • Embrittlement temperature: -60 °C • Resistance to aging: very good • Mechanical behaviour: flexible • Sterilization: autoclavable (+136 °C)

Item ​

Product specification

• Pharmaceutical technology, plant construction, food technology, operating technology, medical engineering, chemical engineering

340845 340846 340847 340848 340849 340850 340851 340852 340853 340854 340855 340856 340857 340858 340859 340860 340861 340862 340863 340864 340865 340866 340867 340868 340869 340870 340871 340872 340737 340738 340739 340740 340741 340742 340743 340744 340745 340746 340747 340748

Inside Ø mm

Outside Ø mm

Wall thickness mm

Unit

Price

m

EURO

2 2 3 3 4 4 4 4 5 5 5 5 5 5 6 6 6 6 7 7 8 8 10 10 10 10 12 12 15 15 18 18 20 20 25 25 30 30 40 40

4 4 5 5 6 6 7 7 8 8 9 9 10 10 9 9 10 10 10 10 12 12 14 14 15 15 17 17 21 21 24 24 27 27 35 35 40 40 50 50

1 1 1 1 1 1 1.5 1.5 1.5 1.5 2 2 2.5 2.5 1.5 1.5 2 2 1.5 1.5 2 2 2 2 2.5 2.5 2.5 2.5 3 3 3 3 3.5 3.5 5 5 5 5 5 5

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 10 5 10 5 10

42.00 104.00 44.00 108.00 48.00 118.00 56.00 136.00 62.00 152.00 66.00 156.00 80.00 184.00 64.00 194.00 76.00 182.00 66.00 156.00 82.00 198.00 90.00 216.00 98.00 234.00 112.00 262.00 172.00 394.00 202.00 466.00 246.00 568.00 418.00 612.00 430.00 616.00 514.00 712.00

THOMAFLUID® II - 2015 29

Tubing - ETFE Tubing

Tubing and Pipes made of Rigid Plastics

Tubing and Pipes made of Rigid Plastics ETFE Tubing THOMAFLUID®-ETFE Chemical Tubing Application area

• Metal-free and high-pressure resistant capillary material for conveyance of acids, alkalis, salt solutions, and solvents, also halogenated ones, under pressure. For metal-free HPLC-systems to separate bioactive materials and for ion exchange chromatography.

Product specification

• Dimensionally stable, chemically inert plastic tube made of opal-white fluorocarbon polymer material ETFE, pliable and impact resistant, free of extractable constituents, physiologically safe, and biocompatible.

• Stable to solvents and hydrolysis, pressure loadable, non-flowing, and abrasion resistant.

• Electrically non-conducting, stable to high energy radiation.

Technical specification

Item ​ 45238 45239 45240 45241 45242 45243 45244 45245 45246 45247 45248 45249 1

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit m

EURO

4.8 4.8 4.8 6.4 6.4 6.4 7.9 7.9 7.9 9.5 9.5 9.5

6.4 6.4 6.4 7.9 7.9 7.9 9.5 9.5 9.5 12.7 12.7 12.7

30 30 30 20 20 20 20 20 20 15 15 15

0.9 1.5 3 0.9 1.5 3 0.9 1.5 3 0.9 1.5 3

46.00 62.00 98.00 62.00 87.00 133.00 77.00 103.00 164.00 95.00 123.00 174.00

at +20 °C

FEP Tubing

• Material: ETFE (ethylene-tetrafluoroethylene) • Colour: colourless-translucent • Shore hardness D: 75° • Temperature range: -200 to +150 °C, for a short time +200 °C • Softening temperature: +271 °C • Density: 1.7 g/cm3 • Water absorption: <0.01 % • Voltage strength: >7.8 kV/mm

THOMAFLUID®-FEP Chemical Tubing Application area

• Conveyance of fluids of all kinds and quality in laboratories and pilot plants as well as in small production units, also under rough environmental conditions.

• Precision tubing connections for applications in the areas of precision machine engineering, medical, biological, and chemical research, biotechnology, lab automatization, and analytical technology.

​

Product specification

Item ​ 83181 83182 83183 83276 83277 83278 83293 83294 83295 83331 83332 83333 18999 19000 19001 45232 45233 45234

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit m

EURO

0.25 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.75 0.75 0.75 1 1 1 1.6 1.6 1.6

0.8 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2

35 35 35 185 185 185 150 150 150 115 115 115 85 85 85 45 45 45

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1.5 3 6

57.00 144.00 185.00 57.00 144.00 185.00 57.00 144.00 185.00 57.00 144.00 185.00 57.00 144.00 185.00 41.00 72.00 123.00

30 THOMAFLUID® II - 2015

Price

Price

• Flexible fluorocarbon tube in well-adjusted dimensions.

• High thermal and mechanical stability, suitable for compressed-air couplings (e.g. with ferrule and hollow screw).

• Chemically resistant and biocompatible, free of extractable constituents.

• Autoclavable and chemically sterilizable.

• The tubing meets the FDA guidelines GRF 21.121.2555.

• Small flow resistance and only slight tendency to adhesion of solid matter due to smooth inner surface with antiadhesive properties.

• Electrically non-conducting, resistant to aging even under unfavourable environmental conditions such as moisture, vapours of solvents and acids, radioactive radiation, and weather effects.

Technical specification

• Material: FEP (fluorinated ethylene-propylene) • Colour: transparent to clear • Shore hardness D: 53° ±3° • Temperature range: -170 to +200 °C • Softening temperature: +252 to +260 °C • Density: 2.14 g/cm³

Tubing - FEP Tubing

Tubing and Pipes made of Rigid Plastics

• Water absorption: <0.01 % • Voltage strength: 5.5 kV/mm • Sterilization: autoclavable (+121 °C); hot air (+160 °C); gas (ethylene oxide); gamma-rays

Item ​ 45320 45321 10232 10233 10240 10241 45325 45326 45327 45328 45329 45330

​

Item ​ 45280 45281 45282 45283 45284 45285 45286 10234 45288 10235 45289 45290 45291 45295 45296 45297 45292 45293 45294 10226 10227 45298 45299 45300 45301 45302 45303 45304 45305 45306 45307 45308 45309 10228 10229 10236 10237 45310 45311 45312 45313 45314 45315 10230 10231 45316 45317 45318 10238 10239 45319

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

0.8 0.8 0.8 0.8 0.8 0.8 1.6 1.6 1.6 1.6 2.2 2.2 2.2 2.4 2.4 2.4 2.4 2.4 2.4 2.5 2.5 2.7 2.7 2.7 3.2 3.2 3.2 3.4 3.4 3.4 3.8 3.8 3.8 4 4 4 4 4.2 4.2 4.2 4.8 4.8 4.8 6 6 6.4 6.4 6.4 6.4 6.4 7.9

1.6 1.6 1.6 2.4 2.4 2.4 3.2 3.2 3.2 3.2 3 3 3 3.2 3.2 3.2 4 4 4 4 4 3.5 3.5 3.5 4.8 4.8 4.8 4.4 4.4 4.4 4.8 4.8 4.8 6 6 6.4 6.4 5.2 5.2 5.2 6.4 6.4 6.4 8 8 7.9 7.9 7.9 9.5 9.5 9.5

20 20 20 34 34 34 20 20 20 20 9 9 9 8 8 8 14 14 14 12 12 7 7 7 11 11 11 7 7 7 6.5 6.5 6.5 12 12 14 14 6 6 6 9 9 9 9 9 7 7 7 12 12 6

1.5 3 6 1.5 3 6 1.5 3 6 9 1.5 3 6 1.5 3 6 1.5 3 6 3 9 1.5 3 6 1.5 3 6 1.5 3 6 1.5 3 6 3 9 3 9 1.5 3 6 1.5 3 6 3 9 1.5 3 6 3 9 1.5

27.00 45.00 85.00 38.00 65.00 114.00 38.00 58.00 114.00 148.00 38.00 65.00 114.00 38.00 65.00 114.00 38.00 65.00 114.00 58.00 148.00 38.00 65.00 114.00 38.00 65.00 114.00 38.00 65.00 114.00 38.00 65.00 114.00 82.00 211.00 74.00 180.00 38.00 65.00 114.00 51.00 85.00 151.00 102.00 254.00 61.00 102.00 181.00 155.00 361.00 61.00

1

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

7.9 7.9 8 8 9.5 9.5 11.1 11.1 11.1 12.7 12.7 12.7

9.5 9.5 10 10 12.7 12.7 12.7 12.7 12.7 14.3 14.3 14.3

6 6 7 7 9 9 4.5 4.5 4.5 4 4 4

3 6 3 9 3 9 1.5 3 6 1.5 3 6

102.00 181.00 111.00 264.00 173.00 400.00 85.00 138.00 220.00 146.00 232.00 371.00

at +20 °C

THOMAFLUID®-High-Tech-FEP Piping Application area

• Flexible pipes for conveyance of all kinds of liquid and gaseous media, also under pressure • Flexible pneumatic and hydraulic pipes • Usable also at increased temperature and under aggressive environmental conditions in the areas of machine and plant construction, precision engineering, medical engineering, biotechnology and physical-technical research laboratories.

Product specification

• Metrically calibrated fluorine copolymer piping, especially for use with THOMAFLUID® quick release pipe couplings • Chemically inert, resistant to solvents, free of leachable components • Biocompatible and resistant to food • Flexible and resistant to bending • Pressure and temperature loadable

Technical specification

• Material: FEP (fluorinated ethylene-propylene) • Colour: opal translucent • Shore hardness D: 55° • Temperature range: -40 to +150 °C • Tolerances outside Ø: 4 mm ±0.05 mm; 6 - 10 mm ±0.07 mm; 12 mm ±0.10 mm ​

Item

Inside Ø

Outside Max. op. Ø pressure1

​

mm

mm

bar

Min. bending radius mm

47293 47294 47295

2.5 2.5 4

4 4 6

28 28 25

40 40 50

Unit

Price

m

EURO

5 25 5

113.00 330.00 192.00

THOMAFLUID® II - 2015 31

Tubing - FEP Tubing Item

Inside Ø

​ 47296 47297 47298 47299 47300 47301 47302 1

Tubing and Pipes made of Rigid Plastics

Outside Max. op. Ø pressure1

mm

mm

bar

Min. bending radius mm

4 6 6 8 8 10 10

6 8 8 10 10 12 12

25 20 20 15 15 12.5 12.5

50 70 70 120 120 180 180

Price

THOMAFLUID®-High-Chem-FEP Corrugated Tubing with straight end pieces

m

EURO

Application area

25 5 25 5 25 5 25

476.00 213.00 532.00 243.00 609.00 294.00 720.00

Unit

at +20 °C

• Flexibly movable tubing connections at systems and aggregates operated under mechanical risk factors such as vibration, shaking, cramped conditions, etc.

• Tight mobile pipe running at machines and equipments of superclean room technology, nuclear technology, biotechnology and gene technology • Movable extraction systems for detrimental gases and vapours, movable aeration supply lines.

Product specification

THOMAFLUID®-High-Tech-FEP Shrinkable Tubing Technical specification

• Material: FEP (fluorinated ethylene-propylene) • Colour: transparent to clear • Temperature range: -40 to +205 °C • Shrinking rate: 1.3:1 • Shrinkage temperature: +204 to +216 °C • Tensile strength: 24.1 MPa (D1708) • Water absorption: <0.01 % • Voltage strength: >2.000 V/mm • Volume Resistivity: 1018 Ohm x cm • Surface resistance: 1016 Ohm • Coefficient of Friction: 1.338 (D542)

• Temperature-resistant, flexible fluoroethylene-propylene (FEP) corrugated bellows tubing of highest chemical resistance and mechanical stability for use under normal conditions, slight excess-pressure or vacuum. Thin-walled, corrugatedly folded, thus extremely pliable, electrically non-conducting and resistant to aging also under extreme environmental conditions such as vapours of acids and solvents, moisture, ionizing radiation etc. Only slight tendency to adhesion of solid matter due to smooth inner surface with antiadhesive properties.

Free of extractable constituents and physiologically safe. The tube meets the requirements of FDA guidelines 21 CFR 17.1550. Delivery in standard lengths with straight, not-corrugated connecting pieces on both ends.

• Tubing without couplings.

Technical specification

• Material: FEP (fluorinated ethylene-propylene) • Colour: translucent-clear • Temperature range: -260 to +200 °C • Vacuum strength: up to 30 mm Hg • Water absorption: <0.01 %

​

​

Item ​ 940632 940633 940634 940635 940636 940637 940638 940639 940640 940641 940651

Ø before shrinkage mm

Ø after shrinkage mm

Unit

Price

m

EURO

0.79 1.14 1.52 2.34 3.58 5 7.37 10.16 12.7 14.7 25.4

0.69 0.99 1.25 1.83 2.9 4.01 5.74 7.9 9.7 11.1 19.4

1 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

12.00 15.00 19.00 22.00 25.00 30.00 35.00 41.00 87.00 291.00 496.00 Item

mm

mm

I-Ø O-Ø Length Length Price end end end bellows fitting fitting fitting mm mm mm mm EURO

45128 6.4 45135 12.7 45138 15.9

9.5 19 23.8

5.14 10.74 14.74

​

32 THOMAFLUID® II - 2015

Inside Outside Ø Ø

6 12 16

19 25 25

500 144.00 1,000 348.00 1,000 348.00

Tubing - FEP Tubing Item

Inside Outside Ø Ø

Tubing and Pipes made of Rigid Plastics

​

mm

mm

I-Ø O-Ø Length Length Price end end end bellows fitting fitting fitting mm mm mm mm EURO

45144 45145 45148 45149 45150 45151 45152 45153 45154 45155 45156

22.2 25.4 31.8 31.8 31.8 38.1 38.1 38.1 50.8 50.8 50.8

31.8 34.9 41.3 41.3 41.3 47.6 47.6 47.6 66.7 66.7 66.7

20.48 22.22 30.22 30.22 30.22 36.22 36.22 36.22 47.96 47.96 47.96

22 24 32 32 32 38 38 38 50 50 50

38 51 51 51 51 51 51 51 51 51 51

2,500 500 500 1,000 2,500 500 1,000 2,500 500 1,000 2,500

975.00 238.00 300.00 on req. on req. on req. on req. on req. on req. on req. on req.

Item ​ 11536 11537 11538 11539 11540 11541 11542 11543 1

Inside Outside Wall Max. op. Min. Unit Price Ø Ø thick- pressure1 bending ness radius mm mm mm bar mm m EURO 4.8 4.8 6.4 6.4 9.5 9.5 12.7 12.7

7.9 7.9 9.5 9.5 14.3 14.3 19 19

1.6 1.6 1.6 1.6 2.4 2.4 3.2 3.2

5.1 5.1 3.8 3.8 3.4 3.4 3.1 3.1

38 38 50 50 88 88 100 100

5 10 5 10 5 10 5 10

192.00 340.00 256.00 495.00 290.00 450.00 426.00 760.00

at +20 °C

THOMAFLUID®-FEP/PE Composite Tubing Application area

THOMAFLUID®-FEP/PVC Composite Tubing Product specification

• Smallest bending radii practically without kinks due to highest flexibility.

• Highest chemical resistance allowing conveyance of all kinds of aggressive solutions (solvents) without extracting.

• Completely neutral in taste and odour.

• Meets FDA Criteria for food contact.

Technical specification

• Material: Liner: FEP (fluoroethylene-propylene) Jacket: TYGON®-SE-200 (PVC, cross-linked) • Temperature range: -10 to +77 °C • Density: 1.45 g/cm3 • Embrittlement temperature: -40 °C (ASTM D746) • Tensile strength: 13.8 MPa (ASTM D412) • Tear resistance: 29 kN/m (ASTM D1004) • Ultimate elongation: 350 % (ASTM D412) • Tensile modulus: 4.5 MPa at 100 % Elongation; 3.1 MPa at 300 % Elongation • Compression set: 53 % at +70 °C / 22 h • Dielectric strength: 24.4 kV/mm (ASTM D149-97) • Water absorption: <0.01 % at +23 °C / 24 h • Regulations: FDA (21 CFR, 177.1550)

• Conveyance of fluids of all kinds and quality in equipment and systems in laboratory and pilot plant scale as well as in small production plants.

• Conveyance of fluids of all kinds and quality under normal conditions, pressure, and increased temperature.

• Connection of apparatuses and systems under corrosion-promoting environmental influence.

Product specification

• Flexible FEP conveying tubing with polyethylene jacket for use at pressure and increased temperature. Excellent chemical resistance and high mechanical stability. Small flow resistance and only slight tendency to adhesion of solid matter due to smooth, antiadhesive inner surface. Free of extractable constituents, physiologically safe, odourless, electrically non-conducting, and resistant to aging.

Technical specification

• Material: Liner: FEP (fluoroethylene-propylene) Jacket: PE (polyethylene) • Colour: conveying tubing: transparent clear; jacket: translucent white • Temperature range: -30 to +90 °C • Resistance to pressure: 14 to 63 bar, depending on dimensions

​

​

Item

Item ​ 339657 339658 11534 11535

Inside Outside Wall Max. op. Min. Unit Price Ø Ø thick- pressure1 bending ness radius mm mm mm bar mm m EURO 1.6 1.6 3.2 3.2

3.2 3.2 6.4 6.4

0.8 0.8 1.6 1.6

6.9 6.9 5.8 5.8

18 18 25 25

5 10 5 10

126.00 232.00 140.00 250.00

​ 451061 451071 451081 451091 451101 451111 451121

Inside Outside Wall Max. op. Min. Unit Price Ø Ø thick- pressure1 bending ness radius mm mm mm bar mm m EURO 3.2 3.2 3.2 4.8 4.8 4.8 6.4

6.4 6.4 6.4 6.4 6.4 6.4 7.9

0.25 0.25 0.25 0.25 0.25 0.25 0.25

63 63 63 24 24 24 21

25.4 25.4 25.4 31.8 31.8 31.8 152

1.5 48.00 3 75.00 6 119.00 1.5 45.00 3 83.00 6 121.00 1.5 56.00

THOMAFLUID® II - 2015 33

Tubing - FEP Tubing Item ​ 451131 451141 451151 45116 45117 45118 45119 45120 45121 45122 45123 45124 45125 45126 1

Tubing and Pipes made of Rigid Plastics

Inside Outside Wall Max. op. Min. Unit Price Ø Ø thick- pressure1 bending ness radius mm mm mm bar mm m EURO 6.4 6.4 6.4 6.4 6.4 9.5 9.5 9.5 9.5 9.5 9.5 12.7 12.7 12.7

7.9 7.9 9.5 9.5 9.5 11.1 11.1 11.1 12.7 12.7 12.7 15.9 15.9 15.9

0.25 0.25 0.25 0.25 0.25 0.3 0.3 0.3 0.3 0.3 0.3 0.38 0.38 0.38

21 21 14 14 14 14 14 14 25 25 25 17 17 17

152 152 238 238 238 254 254 254 101 101 101 152 152 152

3 6 1.5 3 6 0.9 1.5 3 0.9 1.5 3 0.9 1.5 3

100.00 152.00 78.00 131.00 181.00 54.00 76.00 125.00 71.00 101.00 177.00 83.00 129.00 223.00

at +20 °C

THOMAFLUID®-FEP Antista Double-Wall Jacket Pharmaceutical Suction / Pressure Tubing Application area

• Chemical industry, pharmaceutical industry, mineral oil industry, process engineering

Product specification

• Completely smooth, seamless fluoroplastic lining, therefore optimal emptying of residual charge and easy cleaning at change of charge.

• Antiadhesive properties of the liner substantially facilitate the transport of viscous media due to low flow losses. Therefore, the tubing is particularly suitable for the conveyance of pharmaceuticals and cosmetics.

• Liner is physiologically completely safe, it does not contain any extractable constituents, therefore suitable for especially high-grade / ultrapure products.

• Liner is absolutely smooth and homogenous, formation of bacteria nests excluded.

• Jacket is electrically conductive, abrasion-resistant, hardly inflammable and with textile imprint.

• Very good chemical resistance, resistant to weather and aging.

• Diffusion resistance considerably better than PTFE. • Outer layers and intermediate layers of the tubing specification are electrically conductive, all metallic inserts are combined with the conductive rubber layers.

332422 Item ​

332428 I-Ø

O-Ø

Max. Vacu- Min. Steel Unit op. um1 bend. coil press.1 radius mm mm bar mbar mm ​ m 13 13 13 19 19 19 19 19 19 25 25 25 25 25 25 32 32 32 38 38 38 50 50 50 63 63 63

23 23 23 31 31 31 31 31 31 37 37 37 37 37 37 44 44 44 51 51 51 66 66 66 79 79 79

332422 332423 332424 332425 332426 332427 332428 332429 332430 332431 332432 332433 332434 332435 332436 332437 332438 332439 332440 332441 332442 332443 332444 332445 332446 332447 332448 1

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

600 600 600 500 500 500 900 900 900 400 400 400 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900

100 100 100 125 125 125 80 80 80 150 150 150 100 100 100 120 120 120 150 150 150 200 200 200 250 250 250

without without without without without without with with with with with with with with with with with with with with with with with with with with with

Price EURO

1 280.00 3 542.00 5 688.00 1 300.00 3 580.00 5 736.00 1 310.00 3 598.00 5 758.00 1 312.00 3 604.00 5 768.00 1 338.00 3 654.00 5 832.00 1 340.00 3 664.00 5 838.00 1 378.00 3 732.00 5 916.00 1 426.00 3 810.00 5 1,066.00 1 506.00 3 972.00 5 1,352.00

at +20 °C

Technical specification

• Material: Liner: FEP (fluoroethylene-propylene), seamless, smooth bore, electrically non-conductive Jacket: EPDM (ethylene-propylene-diene rubber) • Colour: inside transparent, outside black • Temperature range: -30 to +100 °C, for a short time +130 °C • Insert: adhesive rubber compound as intermediate layer, two braided textile inserts with two crossed copper braids • Coil: stainless steel, hot-dip galvanized (depending on type) • Jacket and intermediate layer: antistatic (electrically conductive) • Conductivity: „M“ (DIN EN 12115) • Leakage resistance: <106 Ohm • Steam stripping: max. 30 min. up to +150 °C • Regulations: in accordance with DIN EN 12115 and TRbF 131/2, conforming to FDA and BfR, meeting German KTW recommendations for drinking water. ​

34 THOMAFLUID® II - 2015

MFA Tubing THOMAFLUID®-High-Chem-MFA Chemical Tubing Application area

• Highly resistant chemical tubing for extreme mechanical and thermal loads. Possible fields of application: chemical analytics, environmental and hygiene technology, biotechnology, semiconductor technology.

• In these areas the tubing is used as chemical tubing for super-clean analytics, highly loadable industrial tubing in pilot plants of process engineering and biotechnology, highly resistant chemical tubing for super-clean acids in semiconductor technology.

Tubing - MFA Tubing Product specification

• Chemical resistance: MFA (modified fluoroalkoxy) is a newly developed fluorinated plastic. It has a very good resistance to most aggressive media, such as inorganic alkalis, oxidizing acids, mineral acids, metal salt solutions, but also organic media including hydrocarbons, anhydrides, ester, ether, ketones, aromatics, amines, peroxides. At high temperatures MFA has only a limited resistance to alkali metals. Also certain organic fluorine halogen and phosphorus compounds are not suitable for high temperature application with MFA. • High dimension tolerance.

• Extremely smooth inside and outside surface, therefore minimal deposits of foreign matters.

• Higher transparency than PTFE, FEP or PFA. The high transparency covers the wavelength range from 390 to 770 nm (visual range) and 200 to 280 nm (UV-range).

• Extremely low moisture absorption: water <0.03 %.

• Non-oxidizing material, i.e. it burns while flame feeding, but stops burning immediately after removing the flame source.

• High temperature and pressure resistance.

• Lowest diffusion values amongst all fluorinated plastics, i.e. nearly gas-tight.

• Outstanding thermal stability: thermogravimetric analysis (50 min. in air at +380 °C: weight loss <0.3%).

• Very good mechanical stability from lowest temperatures up to +250 °C. • Lowest embrittlement phenomena at temperature load.

• High stress crack resistance up to +240 °C. • Temperature aging: very good preservation of mechanical properties after 14 days at +240 °C. • Remarkably resistant also at long weathering.

• Low dielectric constant.

• Very high surface resistance and volume resistivity.

• Volume resistivity, dielectric constant and loss factor independent of temperature.

Technical specification

• Material: MFA (modified fluoroalkoxy) • Colour: crystal-clear • Shore hardness D: 59° (DIN 53505) • Temperature range: -70 to +240 °C • Melting temperature: +290 °C • Embrittlement temperature: -80 °C • Density: 2.14 g/cm3 • Coefficient of friction dynamic against steel, dry: 0.1 - 0.2 • Tearing strength: 28 - 36 N/mm2 at +23 °C; 15 - 21 N/mm2 at +150 °C; 6 - 8 N/mm2 at +250 °C • Dielectric constant: 2.0 • Volume Resistivity: 1018 Ohm x cm • Surface resistance: 1017 Ohm • Regulations: made according to DIN EN ISO 9001, ASTM (American Society for testing and materials), MIL (Military Standard) ​

Tubing and Pipes made of Rigid Plastics Item ​ 303276 303277 303278 303279 303280 303281 303282 303283 303284 303285 303286 303287 303288 303289 303290 303291 303292 303293 303294 303295 303296 303297 303298 303299 303300 303301 303302 303303 303304 303305 303306 303307 303308 303309 303310 303311 303312 303313 303314 303315 303316 303317 303318 303319 303320 303321 303322 303323 303324 303325 303326 303327 303328 303329 303330

Inside Ø mm 1 1 1.5 1.5 1.5 1.5 2 2 2 2 2.5 2.5 2.5 2.5 3 3 3 3 3.5 3.5 3.5 3.5 4 4 4 4 4.5 4.5 4.5 4.5 5 5 5 5 5.5 5.5 5.5 5.5 6 6 6 6 6.5 6.5 6.5 6.5 7 7 7 7 7.5 7.5 7.5 7.5 8

Outside Wall Max. op. Unit Ø thickness pressure1 mm mm bar m 3 3 2.5 2.5 3.5 3.5 3 3 4 4 3.5 3.5 4.5 4.5 4 4 5 5 4.5 4.5 5.5 5.5 5 5 6 6 5.5 5.5 6.5 6.5 6 6 7 7 6.5 6.5 7.5 7.5 7 7 8 8 7.5 7.5 8.5 8.5 8 8 9 9 8.5 8.5 9.5 9.5 9

1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5

26 26 12 12 20 20 10 10 17 17 8.5 8.5 14 14 7 7 13 13 6.5 6.5 11 11 5.5 5.5 10.5 10.5 5 5 9.5 9.5 4.5 4.5 8.5 8.5 4.3 4.3 8 8 4 4 7.5 7.5 3.5 3.5 7 7 3.5 3.5 6.5 6.5 3.2 3.2 6 6 3

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5

Price EURO 78.00 186.00 66.00 172.00 96.00 228.00 84.00 216.00 114.00 270.00 92.00 234.00 126.00 300.00 106.00 270.00 142.00 342.00 88.00 226.00 126.00 300.00 98.00 252.00 138.00 330.00 112.00 288.00 152.00 366.00 124.00 316.00 166.00 396.00 136.00 352.00 180.00 432.00 150.00 388.00 192.00 462.00 162.00 414.00 210.00 488.00 172.00 440.00 222.00 518.00 182.00 468.00 236.00 550.00 196.00

THOMAFLUID® II - 2015 35

Tubing - MFA Tubing Item ​ 303331 303332 303333 303334 303335 303336 303337 303338 303339 303340 303341 303342 303343 303344 303345 303346 303347 303348 303349 303350 303351 303352 303353 303354 303355 303356 303357 303358 303359 303360 303361 1

Inside Ø mm 8 8 8 8.5 8.5 8.5 8.5 9 9 9 9 9.5 9.5 9.5 9.5 10 10 10 10 12 12 12 12 14 14 14 14 16 16 16 16

Tubing and Pipes made of Rigid Plastics

Outside Wall Max. op. Unit Ø thickness pressure1 mm mm bar m 9 10 10 9.5 9.5 10.5 10.5 10 10 11 11 10.5 10.5 11.5 11.5 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18

0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1 0.5 0.5 1 1

3 5.7 5.7 2.8 2.8 5.4 5.4 2.6 2.6 5.2 5.2 2.5 2.5 4.9 4.9 2.3 2.3 4.8 4.8 2 2 4 4 1.7 1.7 3.4 3.4 1.5 1.5 3 3

15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

Price EURO 504.00 248.00 582.00 206.00 530.00 266.00 618.00 218.00 558.00 292.00 652.00 228.00 584.00 322.00 682.00 242.00 622.00 272.00 636.00 268.00 668.00 322.00 750.00 312.00 780.00 370.00 832.00 348.00 795.00 374.00 842.00

at +20 °C

THOMAFLUID®-High-Tech-MFA Corrugated Tubing Application area

• Automobile industry for highest thermal and electrical load, machine construction and electrical engineering, chemical engineering and apparatus construction

Product specification

• Temperature resistant corrugated tubing made of flame-resistant and highly stable fluorinated plastic • Extremely flexible, mechanically highly loadable • Good abrasion resistance and impact resistance • Best dimensional stability over the whole temperature range • Resistant to UV-radiation

Technical specification

• Material: MFA (modified fluoroalkoxy) • Colour: black • Shore hardness D: 59° (DIN 53505) • Temperature range: -200 to +240 °C • Melting temperature: +290 °C • Embrittlement temperature: -80 °C • Density: 2.14 g/cm3 according to ISO R 1183 • Moisture uptake: <0.03 % • Dielectric strength: 36 kV/mm • Elongation at break: >300 % (DIN 53455) • E-modulus: 500 MPa (ISO 527c) • Impact strength: without break (DIN 53453) • Notch impact strength: without break (DIN 53453) • Surface resistance: 1017 Ohm • Flammability rating: UL 94 V-0, FMSS 302 Type A Item

Inside Ø

​

mm

331476 331477 331478 331479 331480 331481 331482 331483 331484 331485 331486 331487 331488 331489 331490 331491 331492 331493 331494 331495 331496 331497 331498 331499 331500 331501 331502

5.5 5.5 5.5 7.6 7.6 7.6 9.8 9.8 9.8 12.4 12.4 12.4 13.8 13.8 13.8 15.5 15.5 15.5 16.6 16.6 16.6 18.6 18.6 18.6 20.1 20.1 20.1

Outside Wall Min. Ø thickness bending radius mm mm mm 7.8 7.8 7.8 10.7 10.7 10.7 13 13 13 16 16 16 17.8 17.8 17.8 19.6 19.6 19.6 21.1 21.1 21.1 23.3 23.3 23.3 25 25 25

0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6

13 13 13 19 19 19 22 22 22 32 32 32 35 35 35 38 38 38 42 42 42 44 44 44 51 51 51

Unit

Price

m

EURO

1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10

32.00 132.00 216.00 34.00 142.00 234.00 38.00 160.00 264.00 46.00 186.00 296.00 50.00 210.00 330.00 54.00 222.00 352.00 56.00 228.00 362.00 60.00 244.00 380.00 62.00 250.00 386.00

​

PA Tubing THOMAFLUID®-PA Chemical Tubing - Standard Product specification

• Good temperature resistance, good mechanical stability • Good abrasion resistance, high impact toughness • Very good UV-resistance • Low moisture absorption due to very low density • High dimensional stability of tubing, low permeability to gas

36 THOMAFLUID® II - 2015

Tubing - PA Tubing

Tubing and Pipes made of Rigid Plastics

Technical specification

• Material: PA 12 soft (polyamide 12) • Temperature range: -40 to +80 °C, for a short time up to +150 °C • Melting temperature: +173 °C • Sterilization: steam (+136 °C); gas (ethylene oxide); gamma-rays • Density: 1.01 g/cm3 (ISO 1183-3) • Tensile strength: 26 MPa (ISO 527-1,2) • Bending strength: 19 MPa (ISO 178) • E-modulus: 400 MPa (ISO 178) • Impact toughness: at +23 °C 115 kJ/m2 - partial break (ISO 179/1eA) at -40 °C 4 kJ/m2 - complete break (ISO 179/1eA) • Rockwell hardness: 51 (ISO 2039-2) ​

Item

I-Ø

​

mm

339650 339651 25804 25805 25806 25807 25816 25817 25818 25819 25828 25829 25830 25831 25852 25853 25854 25855 25864 25865 25866 25867 25876 25877 25878 25879 25888 25889 25890 25891 25894 25895

1 1 2 2 2 2 2.5 2.5 2.5 2.5 2.9 2.9 3 3 3 3 3 3 4 4 4 4 3 3 3 3 4 4 4 4 4 4

O-Ø

Max. op. Min. Colour Unit pressure1 bending radius mm bar mm ​ m 2 2 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6

60 60 45 45 45 45 31 31 31 31 19 19 19 19 34 34 34 34 15 15 15 15 45 45 45 45 27 27 27 27 27 27

15 15 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

nature nature nature nature black black nature nature black black nature nature black black nature nature black black nature nature black black nature nature black black nature nature black black blue blue

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

Price EURO 28.00 56.00 22.00 43.00 22.00 43.00 22.00 43.00 22.00 43.00 22.00 43.00 22.00 43.00 27.00 57.00 27.00 57.00 27.00 57.00 27.00 57.00 32.00 72.00 32.00 72.00 30.00 60.00 30.00 60.00 30.00 60.00

Item

I-Ø

​

mm

25896 25897 25898 25899 25912 25913 25924 25925 25926 25927 25936 25937 25938 25939 25948 25949 25950 25951 25954 25955 25960 25961 25962 25963 25964 25965 25966 25968 25972 25973 25974 25975 25984 25985 25986 25987 25996 25997 25998 25999 26008 26009 26010 26011 26012 26013 26016 26017 26020 26021 26022 26023 26044 26045

4 4 4 4 4 4 5 5 5 5 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8

O-Ø

Max. op. Min. Colour Unit pressure1 bending radius mm bar mm ​ m 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 11 11 11 12 12

27 27 27 27 36 36 22 22 22 22 45 45 45 45 30 30 30 30 30 30 19 19 19 19 19 19 19 19 27 27 27 27 34 34 34 34 23 23 23 23 15 15 15 15 15 15 15 15 21 21 21 21 27 27

25 25 25 25 40 40 40 40 40 40 50 50 50 50 40 40 40 40 40 40 30 30 30 30 30 30 30 30 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60

yellow yellow green green nature nature nature nature black black nature nature black black nature nature black black blue blue nature nature black black red red blue yellow nature nature black black nature nature black black nature nature black black nature nature black black red red yellow yellow nature nature black black nature nature

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 5 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

Price EURO 30.00 60.00 30.00 60.00 32.00 64.00 32.00 64.00 32.00 64.00 39.00 81.00 39.00 81.00 32.00 64.00 32.00 64.00 32.00 64.00 32.00 64.00 32.00 64.00 32.00 64.00 32.00 32.00 37.00 80.00 37.00 80.00 57.00 102.00 57.00 102.00 45.00 96.00 45.00 96.00 46.00 99.00 46.00 99.00 46.00 99.00 46.00 99.00 51.00 110.00 51.00 110.00 71.00 163.00

THOMAFLUID® II - 2015 37

Tubing - PA Tubing Item

I-Ø

​

mm

26046 26047 26056 26057 26058 26059 26068 26069 26070 26071 26074 26075 26082 26083 26104 26105 26116 26117 26118 26119 340317 340318 340319 340320 340321 340322 340323 340324 1

Tubing and Pipes made of Rigid Plastics

O-Ø

Max. op. Min. Colour Unit pressure1 bending radius mm bar mm ​ m

8 8 9 9 9 9 10 10 10 10 10 10 9 9 10 10 11 11 11 11 12 12 12 12 14 14 15 15

12 12 12 12 12 12 12 12 12 12 12 12 13 13 14 14 14 14 14 14 14 14 15 15 16 16 18 18

27 27 19 19 19 19 12 12 12 12 12 12 24 24 22 22 16 16 16 16 12 12 17 17 10 10 14 14

60 60 60 60 60 60 85 85 85 85 85 85 100 100 80 80 80 80 80 80 80 80 90 90 100 100 140 140

black black nature nature black black nature nature black black blue blue black black nature nature nature nature black black nature nature nature nature nature nature nature nature

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

Price EURO 71.00 163.00 80.00 180.00 80.00 180.00 73.00 131.00 73.00 131.00 73.00 131.00 80.00 180.00 73.00 131.00 86.00 140.00 86.00 140.00 90.00 148.00 114.00 186.00 92.00 152.00 144.00 236.00

at +20 °C

THOMAFLUID®-PA Chemical Tubing - calibrated Application area

• Flexible piping for conveyance of all kinds of liquid and gaseous media, for hydraulic and pneumatic control systems.

Product specification

• Polyamide piping metrically calibrated according to NFE-Standard 49.100, especially for use with THOMAFLUID® quick-release pipe couplings; chemically inert and free of leachable components, flexible, resistant to bending, and pressure loadable.

• UV-resistant. ​

38 THOMAFLUID® II - 2015

Technical specification

• Material: PA 12 soft (polyamide 12 soft) • Shore hardness D: 60° • Temperature range: -20 to +80 °C • Tolerances outside Ø: 4 - 5 mm: up to -0.07 mm; 6 - 14 mm: from -0.1 to +0.05 mm Item ​ 47064 47065 47066 47067 47068 47069 47070 47071 47072 47073 47074 47075 47076 47077 47080 47081 47082 47083 47084 47085 47086 47087 47088 47089 47090 47091 47092 47093 47094 47095 47096 47097 47098 47099 47102 47103 47104 47105 47106 47107 47108 47109 47110 47111 47112 47113 47114 47115

Inside Outside Max. op. Min. Colour Unit Ø Ø pressure1 bending radius mm mm bar mm ​ m 2 2 2.7 2.7 3.3 3.3 4 4 6 6 7.5 7.5 8 8 10 10 11 11 12 12 2 2 2.7 2.7 3.3 3.3 4 4 6 6 7.5 7.5 8 8 10 10 11 11 12 12 2 2 2.7 2.7 3.3 3.3 4 4

4 4 4 4 5 5 6 6 8 8 10 10 10 10 12 12 14 14 14 14 4 4 4 4 5 5 6 6 8 8 10 10 10 10 12 12 14 14 14 14 4 4 4 4 5 5 6 6

55 55 25 25 25 25 36 36 25 25 27 27 18 18 14 14 18 18 12 12 55 55 25 25 25 25 36 36 25 25 27 27 18 18 14 14 18 18 12 12 55 55 25 25 25 25 36 36

25 25 30 30 25 25 35 35 55 55 75 75 90 90 90 90 120 120 100 100 25 25 30 30 25 25 35 35 55 55 75 75 90 90 90 90 120 120 100 100 25 25 30 30 25 25 35 35

white white white white white white white white white white white white white white white white white white white white black black black black black black black black black black black black black black black black black black black black green green green green green green green green

5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25

Price EURO 23.00 64.00 23.00 64.00 29.00 82.00 36.00 97.00 46.00 139.00 67.00 215.00 59.00 197.00 72.00 215.00 108.00 281.00 87.00 256.00 23.00 64.00 23.00 64.00 29.00 82.00 36.00 97.00 46.00 139.00 67.00 215.00 59.00 197.00 72.00 215.00 108.00 281.00 87.00 256.00 23.00 64.00 23.00 64.00 29.00 82.00 36.00 97.00

Tubing - PA Tubing Item ​ 47116 47117 47118 47119 47120 47121 47124 47126 47127 47130 47131 47132 47133 47134 47135 47136 47137 47138 47139 47140 47141 47142 47143 47144 47146 47147 47148 47149 47150 47151 47152 47153 47154 47155 47156 47157 47158 47159 47160 47161 47162 47163 47164 47165 47168 47169 47170 47171 47172 47173 47174 47175 47176 47177

Tubing and Pipes made of Rigid Plastics

Inside Outside Max. op. Min. Colour Unit Ø Ø pressure1 bending radius mm mm bar mm ​ m 6 6 7.5 7.5 8 8 10 11 11 2 2 2.7 2.7 3.3 3.3 4 4 6 6 7.5 7.5 8 8 9 10 10 11 11 12 12 2 2 2.7 2.7 3.3 3.3 4 4 6 6 7.5 7.5 8 8 10 10 11 11 12 12 2 2 2.7 2.7

8 8 10 10 10 10 12 14 14 4 4 4 4 5 5 6 6 8 8 10 10 10 10 12 12 12 14 14 14 14 4 4 4 4 5 5 6 6 8 8 10 10 10 10 12 12 14 14 14 14 4 4 4 4

25 25 27 27 18 18 14 18 18 55 55 25 25 25 25 36 36 25 25 27 27 18 18 18 14 14 18 18 12 12 55 55 25 25 25 25 36 36 25 25 27 27 18 18 14 14 18 18 12 12 55 55 25 25

55 55 75 75 90 90 90 120 120 25 25 30 30 25 25 35 35 55 55 75 75 90 90 120 90 90 120 120 100 100 25 25 30 30 25 25 35 35 55 55 75 75 90 90 90 90 120 120 100 100 25 25 30 30

green green green green green green green green green red red red red red red red red red red red red red red red red red red red red red blue blue blue blue blue blue blue blue blue blue blue blue blue blue blue blue blue blue blue blue yellow yellow yellow yellow

5 25 5 25 5 25 5 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25

Price

Item

EURO

​

46.00 139.00 72.00 217.00 59.00 197.00 72.00 108.00 281.00 23.00 64.00 23.00 64.00 29.00 82.00 36.00 97.00 46.00 139.00 72.00 217.00 59.00 197.00 108.00 72.00 215.00 108.00 281.00 87.00 256.00 23.00 64.00 23.00 64.00 29.00 82.00 36.00 97.00 46.00 139.00 72.00 217.00 59.00 197.00 72.00 215.00 108.00 281.00 87.00 256.00 23.00 64.00 23.00 64.00

47178 47180 47181 47182 47183 47184 47185 47186 47187 47190 47191 47192 47193 47194 47195 1

Inside Outside Max. op. Min. Colour Unit Ø Ø pressure1 bending radius mm mm bar mm ​ m 3.3 4 4 6 6 7.5 7.5 8 8 10 10 11 11 12 12

5 6 6 8 8 10 10 10 10 12 12 14 14 14 14

25 36 36 25 25 27 27 18 18 14 14 18 18 12 12

25 35 35 55 55 75 75 90 90 90 90 120 120 100 100

yellow yellow yellow yellow yellow yellow yellow yellow yellow yellow yellow yellow yellow yellow yellow

5 5 25 5 25 5 25 5 25 5 25 5 25 5 25

Price EURO 29.00 36.00 97.00 46.00 139.00 72.00 217.00 59.00 197.00 72.00 215.00 108.00 281.00 87.00 256.00

at +20 °C

THOMAFLUID®-PA Chemical Tubing - High-Flexible Application area

• Suitable for use in cable carriers

Product specification

• Superflexible PA tubing without elastomer plasticiser • High low-temperature elasticity • Outstanding hot air and weather resistance

Technical specification

• Material: PA (polyamide) • Shore hardness D: 55° • Temperature range: -50 to +60 °C ​

Item ​ 303565 303566 303567 303568 303569 303570 303571 303572 303573 303574

Inside Outside Max. op. Min. Colour Unit Price Ø Ø pressure1 bending radius mm mm bar mm ​ m EURO 2.5 2.5 2.5 2.5 4 4 4 4 6 6

4 4 4 4 6 6 6 6 8 8

24 24 24 24 22 22 22 22 16 16

20 20 20 20 25 25 25 25 35 35

nature nature black black nature nature black black nature nature

5 15 5 15 5 15 5 15 5 15

24.00 48.00 24.00 48.00 33.00 66.00 33.00 66.00 36.00 70.00

THOMAFLUID® II - 2015 39

Tubing - PA Tubing Item ​

Inside Outside Max. op. Min. Colour Unit Price Ø Ø pressure1 bending radius mm mm bar mm ​ m EURO

303575 303576 303577 303578 303579 303580 303581 303582 303583 303584 303585 303586 303587 303588 303589 303590 303591 303592 303593 303594 303595 303596 1

Tubing and Pipes made of Rigid Plastics

6 6 8 8 8 8 9 9 9 9 11 11 11 11 12 12 12 12 13 13 13 13

8 8 10 10 10 10 12 12 12 12 14 14 14 14 15 15 15 15 16 16 16 16

16 16 12 12 12 12 16 16 16 16 14 14 14 14 13 13 13 13 12 12 12 12

35 35 55 55 55 55 55 55 55 55 70 70 70 70 90 90 90 90 100 100 100 100

black black nature nature black black nature nature black black nature nature black black nature nature black black nature nature black black

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

at +20 °C

THOMAFLUID®-PA Chemical Tubing - macro Product specification

• Good temperature resistance • Best mechanical stability • Good abrasion resistance • Remarkable impact toughness • Low moisture absorption due to very low density • High dimensional stability of tubing

Technical specification

• Material: PA 12 soft (polyamide 12, soft) • Shore hardness D: 61° (DIN 73378) • Temperature range: -50 to +100 °C • Density: 1.02 g/cm3 at +23 °C • Permeability to gas: low permeability • Physiological assessment: safe ​

36.00 70.00 50.00 109.00 50.00 109.00 88.00 198.00 88.00 198.00 95.00 154.00 95.00 154.00 125.00 199.00 125.00 199.00 139.00 222.00 139.00 222.00

Item ​ 302799 302800 302801 302802 302803 302804 302805 302806 303085 303086 303087 303088 303089 303090 303091 303092 1

12 12 12 12 14 14 14 14 18 18 18 18 23 23 23 23

15 15 15 15 18 18 18 18 22 22 22 22 28 28 28 28

15 15 15 15 17 17 17 17 13 13 13 13 14 14 14 14

90 90 90 90 100 100 100 100 150 150 150 150 190 190 190 190

nature nature black black nature nature black black nature nature black black nature nature black black

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

98.00 206.00 98.00 206.00 134.00 282.00 134.00 282.00 186.00 392.00 186.00 392.00 248.00 484.00 248.00 484.00

at +20 °C

THOMAFLUID®-PA Chemical Tubing electrically conductive and tolerated outside Application area

• Vacuum lines in explosion-proof rooms • Pressure lines in explosion-proof rooms

Product specification

• Electrically conductive - graphite-filled • Good mechanical stability • Resistance to abrasion • Remarkable pressure resistance and impact resistance • High temperature resistance • Very good UV-resistance • Best resistance to aging • Highest water insensitivity (no absorption) • Calibrated, thus suitable for plug-in connectors • Highest dimensional stability • Good chemical resistance, especially to oils, fats, fuels, lacquer solvents and hydraulic liquids

Technical specification

• Material: PA 11/12 soft (polyamide 11/12 soft) • Colour: black • Temperature range: 40 to +90 °C • Surface resistance: <104 Ohm • Permeability: extremely low • Tolerances outside Ø: 4-6 mm ±0.05 mm; 8-16 mm ±0.10 mm

​

40 THOMAFLUID® II - 2015

Inside Outside Max. op. Min. Colour Unit Price Ø Ø pressure1 bending radius mm mm bar mm ​ m EURO

Tubing - PA Tubing Item ​

mm

330035 330036 330037 330038 330039 330040 330041 330042 330043 330044 330045 330046 1

Inside Ø

2 2 4 4 6 6 8 8 10 10 12 12

Tubing and Pipes made of Rigid Plastics

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 4 4 6 6 8 8 10 10 12 12 16 16

45 45 27 27 19 19 15 15 12 12 19 19

20 20 25 25 30 30 60 60 85 85 90 90

Unit

Price

m

EURO

5 15 5 15 5 15 5 15 5 15 5 15

116.00 290.00 122.00 302.00 126.00 312.00 128.00 320.00 132.00 330.00 174.00 436.00

Item ​ 10164 10165 10170 10171 10172 10174 10175 10176 10177 10180 10181 10182 10183 10194 10195

at +20 °C

1

THOMAFLUID®-High-Tech-PA Tubing for Medical Engineering Application area

• Hospital technology, hygiene technology, medical engineering, sterile technology

Product specification

• Conveying and pressure tubing • Good mechanical stability, good abrasion resistance • Good impact resistance, good temperature resistance • Good coefficient of sliding friction • Smooth surface • Physiologically absolutely safe • Well tolerated by tissues, lack of tissue irritation and toxicity, thus suitable for surgery • Excellent material for i.v. cannulation • Medically pure, non-toxic

Technical specification

• Material: PA 11 (flexible); PA 6 (semirigid); PA (polyamide) • Colour: transparent • Temperature range: -70 to +160 °C • Sterilization: autoclavable (+136 °C); gas (ethylene oxide); gamma-rays

Inside Ø mm 1.9 1.9 0.25 0.25 0.75 1 1 1 1 1.88 1.88 1.9 1.9 8 8

Outside Max. op. Design Ø pressure1 mm bar ​ 3.18 3.18 0.75 0.75 0.94 1.34 1.34 1.78 1.78 2.77 2.77 3.18 3.18 9.5 9.5

17.9 17.9 35.2 35.2 7.5 10 10 20.3 20.3 8.8 8.8 17.9 17.9 6.1 6.1

flexible flexible semirigid semirigid semirigid semirigid semirigid semirigid semirigid semirigid semirigid semirigid semirigid semirigid semirigid

Unit

Price

m

EURO

5 15 5 15 5 5 15 5 15 5 15 5 15 3 9

69.00 187.00 23.00 63.00 29.00 37.00 78.00 37.00 78.00 51.00 138.00 69.00 187.00 121.00 291.00

at +20 °C

THOMAFLUID®-High-Tech-PA Lumen Chemical Tubing - triple-lumen Product specification

• Best temperature resistance • Very good mechanical stability • Remarkable abrasion resistance • Good impact toughness • Low moisture absorption due to extremely low density • High dimensional stability of tubing

Technical specification

• Material: PA 12 soft (polyamide 12 soft) • Colour: blue / black / natural • Temperature range: -50 to +120 °C, for a short time +150 °C • Sterilization: steam (+136 °C); gas (ethylene oxide); gamma-rays • Density: 1.02 g/cm3 • Permeability to gas: low permeability • Physiological assessment: safe ​

​

Item Item ​ 10158 10159 10160 10161

Inside Ø mm 1 1 1.5 1.5

Outside Max. op. Design Ø pressure1 mm bar ​ 1.78 1.78 2.1 2.1

20.3 20.3 12.5 12.5

flexible flexible flexible flexible

Unit

Price

m

EURO

5 15 5 15

37.00 78.00 42.00 114.00

​ 302789 302790 302791 302792 302793

Inside Ø mm 2 2 4 4 6

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 4 4 6 6 8

34 34 22 22 18

25 25 35 35 55

Unit

Price

m

EURO

5 15 5 15 5

130.00 314.00 144.00 340.00 164.00

THOMAFLUID® II - 2015 41

Tubing - PA Tubing Item ​

mm

302794 302795 302796 1

Inside Ø

6 8 8

Tubing and Pipes made of Rigid Plastics

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 8 10 10

18 14 14

Unit

Price

m

EURO

15 5 15

374.00 198.00 454.00

55 90 90

Item ​

Inside Ø inch

Outside Ø inch

O-Ø spiral mm

48056 48057 48058 48059 48060 48061 48062 48063 48064 48065 48066 48067 48068 48069 48070 48071 48072

5/16“ 5/16“ 5/16“ 5/16“ 5/16“ 5/16“ 3/8“ 3/8“ 3/8“ 3/8“ 3/8“ 3/8“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

3/8“ 3/8“ 3/8“ 3/8“ 3/8“ 3/8“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 5/8“ 5/8“ 5/8“ 5/8“ 5/8“

115 115 115 115 115 115 140 140 140 140 140 140 220 220 220 220 220

at +20 °C

THOMAFLUID®-PA Spiral Tubing - imperial Application area

• Conveyance of neutral, liquid, and gaseous media in moving and vibrating systems such as cooling brine and other cooling liquids, hydraulic and pneumatic robot control systems, automated metering systems in industrial plants, as well as in experimental prototype building and pilot plants of physics, biotechnology, chemistry, and medical engineering.

Product specification

Number Working Price of coils length ​ m EURO 10 20 30 40 60 90 8 15 23 31 46 70 10 15 20 30 56

2.5 5 7.5 10 15 22.5 2.5 5 7.5 10 15 22.5 5 7.5 10 15 22.5

34.00 52.00 72.00 95.00 110.00 141.00 44.00 70.00 90.00 108.00 139.00 179.00 85.00 126.00 151.00 225.00 333.00

• Polyamide pipe (PA) without connecting pieces, permanent-helically and tightly coiled, flexible, dimensionally stable, high long-term return spring force also at permanent load, resistant to oils, fuels, and aqueous salt solutions; mechanically stable, resistant to abrasion.

• UV-resistant.

THOMAFLUID®-PA Spiral Tubing with Male R-Threads

Technical specification

Application area

• Material: PA 12 soft (polyamide 12, soft) • Colour: blue • Temperature range: -40 to +90 °C • Max. operating pressure: 15 bar

• Conveyance of neutral, liquid, and gaseous media in moving and vibrating systems such as hydraulic and pneumatic robot control systems, automated dosing systems in industrial plants, as well as in experimental prototype building and pilot plants of physics, biotechnology, chemistry, and medical engineering.

​

Product specification

• Permanent-helically coiled, extremely flexible polyamide pipe, metrically calibrated. Chemically inert, free of leachable components, resistant to abrasion, pressure and temperature loadable. On both ends, fixed antikink devices and brass-nickelized conical R 1/4“ outer threaded pieces, with inner and outer hexagon each for straight connection preferably with THOMAFLUID® quick release pipe couplings of type range ELGEES PA 3100. Low weight, two practice-oriented pipe dimensions of 6x4 mm and 8x6 mm respectively; proven, fatigueresistingly recovering working lengths of 2, 4 and 6 m.

Item ​

Inside Ø inch

Outside Ø inch

O-Ø spiral mm

48040 48041 48042 48043 48044 48045 48046 48047 48048 48049 48050 48051 48052 48053 48054 48055

1/8“ 1/8“ 1/8“ 1/8“ 3/16“ 3/16“ 3/16“ 3/16“ 3/16“ 3/16“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“

3/16“ 3/16“ 3/16“ 3/16“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 5/16“ 5/16“ 5/16“ 5/16“ 5/16“ 5/16“

38 38 38 38 75 75 75 75 75 75 75 75 75 75 75 75

42 THOMAFLUID® II - 2015

Number Working Price of coils length ​ m EURO 36 72 108 144 15 30 45 60 90 140 15 30 45 60 90 135

2.5 5 7.5 10 2.5 5 7.5 10 15 22.5 2.5 5 7.5 10 15 22.5

29.00 46.00 67.00 87.00 31.00 49.00 69.00 90.00 100.00 149.00 31.00 49.00 69.00 90.00 100.00 149.00

Technical specification

• Material: PA 12 (polyamide 12) • Colour: blue or orange • Shore hardness D: 60° • Temperature range: -15 to +70 °C • Tolerances outside Ø: +0.05 to -0.1 mm • Diameter of turn: for 6x4 pipe 60 mm; for 8x6 pipe 70 mm • Number of turns for working length: for 2 m: 20; 4 m: 40; 6 m: 60 ​

Tubing - PA Tubing

Tubing and Pipes made of Rigid Plastics

Item Inside Outside Max. op. Colour Working Total Price Ø Ø pressure1 length length ​ mm mm bar ​ m m EURO 47319 47320 47321 47322 47323 47324 47325 47326 47327 47328 47329 47330 1

4 4 6 6 4 4 6 6 4 4 6 6

at +20 °C

6 6 8 8 6 6 8 8 6 6 8 8 2

20 20 20 20 20 20 20 20 20 20 20 20

blue orange blue orange blue orange blue orange blue orange blue orange

2 2 2 2 4 4 4 4 6 6 6 6

4.6 4.6 4.6 4.6 9 9 9 9 13.4 13.4 13.4 13.4

50.00 50.00 56.00 56.00 62.00 62.00 72.00 72.00 77.00 77.00 90.00 90.00

Item ​ 330199 330200 330201 330202 330203 330204 330205 330206 330207

at +70 °C

THOMAFLUID®-High-Tech-PA Spiral Tubing with Rotatable Male G-Threads Application area

• Compressed air lines in the low pressure area, mini hydraulics in the measurement technique and control engineering, fuel and lubricant supply systems, low pressure lines (vacuum technology)

Product specification

• Good temperature resistance • High impact toughness • Good pressure resistance • Best UV-resistance • Good resistance to stress cracking • Very high abrasion resistance • Water insensitivity • Resistant to most oils, fats, fuels, lacquer solvents and hydraulic liquids

Inside Ø mm

Outside Ø mm

External thread ​

Working length m

Price EURO

4 4 4 6 6 6 9 9 9

6 6 6 8 8 8 12 12 12

G 1/8“ G 1/8“ G 1/8“ G 1/4“ G 1/4“ G 1/4“ G 3/8“ G 3/8“ G 3/8“

2.5 5 7.5 2.5 5 7.5 2.5 5 7.5

60.00 82.00 98.00 62.00 98.00 122.00 106.00 138.00 198.00

THOMAFLUID®-PA High-Pressure Chemical Tubing Application area

• Low pressure hydraulic, centralized grease filling systems

Technical specification

• Material: PA (polyamide) • Colour: nature • Shore hardness D: 96° • Temperature range: 0 to +100 °C ​

Technical specification

• Material: PA 12 soft (polyamide 12, soft) • Colour: blue • Temperature range: -40 to +90 °C, for a short time +110 °C • Density: 1.02 g/cm3 (ISO R1183D) • Tensile strength: 40 N/mm2 (ISO R 527) • Elongation at break: >50 % (ISO R 527) • Bending strength: 19 N/mm2 (ISO 178) • Design: on both sides fitted with antikink device and rotatable connecting thread G ​

Item

Inside Ø

​

mm

305344 305345 305346 305347

1.5 1.5 3 3

Outside Max. op.

Min. Ø pressure bending radius mm bar mm 4 4 6 6

136 136 100 100

35 35 45 45

Unit

Price

m

EURO

5 15 5 15

35.00 79.00 55.00 125.00

THOMAFLUID® II - 2015 43

Tubing - PA Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-PA Double-Wall Jacket High-Pressure Chemical Tubing - 1 insert

THOMAFLUID®-PA Corrugated Tubing

Product specification

• Conveyance of liquid media, protection of lines, transport of freeflowing solid matters, withdrawing of gases

Application area

• High-pressure hydraulic tubing for hardly inflammable hydraulic liquids on phosphate-ester base, liquids on mineral oil and glycol base, mineral lubricants, cooling liquids, water up to +70 °C, dyes, various solvents, fuels, carbonic acid, compressed air, nitrogen, and natural gas.

• High mechanical stability • Excellent abrasion resistance • High fatigue strength • Good impact toughness • Good coefficient of sliding friction • Good temperature resistance • Very good abrasion resistance and mechanical stability of the jacket • UV-resistant

Technical specification

• Material: Liner: PA 11 (polyamide 11) Jacket: TPE-U (PUR), pricked • Colour: black • Temperature range: -40 to +100 °C; water max. +65 °C • Insert: synthetic fibres • Bursting pressure: 4-fold dynamic operating pressure • Regulations: SAE100 R7

Product specification

• Low-weighted corrugated tubing made of PA 6 (polyamide), transparent, black or grey dyed. High bending strength, dimensional stability in the heat, high resistance to abrasion, and good impact toughness, also at low temperatures. Low tendency to build-up an electrostatic charge and good chemical resistance, except to acids, halogens, and oxidants.

• UV-resistant.

Technical specification

• Material: PA 6 (polyamide 6) • Temperature range: -30 to +80 °C (DIN 53446) • Density: 1.12 up to 1.15 g/cm3 (DIN 53479) • Tearing strength: 40 - 70 N/mm2 (DIN 53455) • Elongation at break: 50 - 200 % (DIN 53455) • E-modulus: 1200 - 3200 N/mm2 (DIN 53457) • Impact toughness: without break (DIN 53453) • Notch impact strength: without break (DIN 53453) • Linear expansion coefficient: 0.7 - 1.2 x 10-4 x K-1 (DIN 52523) • Thermal conductivity: 0.21 - 0.25 W/mK (DIN 52612) • Track resistance: KA3b (DIN 53480) • Dielectric strength: 20 - 80 kV/mm (DIN 53481) ​

​

Item

Inside Ø

​

mm

13087 13088 13089 13090 13091 13092 13093 13094 13095 13096 13097 13098 13099 13100

3.2 3.2 4.8 4.8 6.4 6.4 8 8 9.5 9.5 12.7 12.7 19 19

1

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 8.6 8.6 10.9 10.9 13 13 15.1 15.1 16.8 16.8 20.8 20.8 27.2 27.2

at +20 °C

44 THOMAFLUID® II - 2015

172 172 207 207 207 207 172 172 155 155 138 138 86 86

13 13 19 19 32 32 44 44 51 51 76 76 127 127

Unit

Price

m

EURO

5 10 5 10 5 10 5 10 3 5 3 5 1 3

116.00 210.00 118.00 215.00 133.00 246.00 151.00 277.00 113.00 156.00 154.00 236.00 82.00 213.00

Item Nominal Inside Outside Min. Colour Unit width Ø Ø bending radius ​ mm mm mm mm ​ m 43082 43083 43084 43085 43086 43087 43088 43089 43090 43094 43095 43096 43097 43098 43099 43106 43107 43108 43109 43110

7.5 7.5 7.5 8.5 8.5 8.5 10 10 10 12 12 12 13 13 13 17 17 17 4.5 4.5

6.7 6.7 6.7 8.5 8.5 8.5 9.9 9.9 9.9 12.2 12.2 12.2 12.8 12.8 12.8 16.7 16.7 16.7 4.5 4.5

10.5 10.5 10.5 11.5 11.5 11.5 13 13 13 15.7 15.7 15.7 16 16 16 21.2 21.2 21.2 7.1 7.1

11 11 11 13 13 13 15 15 15 20 20 20 20 20 20 30 30 30 10 10

nature nature nature nature nature nature nature nature nature nature nature nature nature nature nature nature nature nature black black

5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10

Price EURO 48.00 85.00 116.00 48.00 85.00 116.00 53.00 90.00 124.00 70.00 122.00 165.00 81.00 145.00 197.00 94.00 166.00 221.00 44.00 78.00

Tubing - PE Tubing

Tubing and Pipes made of Rigid Plastics

Item Nominal Inside Outside Min. Colour Unit width Ø Ø bending radius ​ mm mm mm mm ​ m 43111 43112 43113 43114 43115 43116 43117 43118 43119 43120 43121 43122 43123 43124 43125 43126 43127 43128 43129 43130 43131 43132 43133 43134 43135 43136 43137 43138

4.5 7.5 7.5 7.5 8.5 8.5 8.5 10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 16 16 16 17 17 17

4.5 6.7 6.7 6.7 8.5 8.5 8.5 9.9 9.9 9.9 10.5 10.5 10.5 12.2 12.2 12.2 12.8 12.8 12.8 14.2 14.2 14.2 14.9 14.9 14.9 16.7 16.7 16.7

7.1 10.5 10.5 10.5 11.5 11.5 11.5 13 13 13 13.6 13.6 13.6 15.7 15.7 15.7 16 16 16 18.5 18.5 18.5 18.9 18.9 18.9 21.2 21.2 21.2

10 11 11 11 13 13 13 15 15 15 18 18 18 20 20 20 20 20 20 25 25 25 25 25 25 30 30 30

black black black black black black black black black black black black black black black black black black black black black black black black black black black black

15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15

Price EURO 105.00 48.00 85.00 116.00 48.00 85.00 116.00 53.00 90.00 124.00 56.00 96.00 131.00 70.00 122.00 165.00 81.00 145.00 197.00 90.00 158.00 214.00 91.00 160.00 216.00 94.00 166.00 221.00

Item ​ 28239 28240 10218 10219 28241 28242 28243 28244 10220 10221 10222 10223 28245 28246 28247 28248 10224 10225

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

0.5 0.5 0.5 0.5 0.8 0.8 1 1 1 1 1.5 1.5 1.5 1.5 2 2 2 2

1 1 3 3 2 2 1.8 1.8 3 3 3 3 3.5 3.5 2.8 2.8 3 3

10 20 5 15 10 20 10 20 5 15 5 15 10 20 10 20 5 15

35.00 62.00 19.00 42.00 47.00 83.00 47.00 83.00 21.00 44.00 23.00 47.00 59.00 106.00 59.00 106.00 25.00 51.00

THOMAFLUID®-LDPE Chemical Tubing - Standard Product specification

PE Tubing THOMAFLUID®-PE Analytical Tubing Product specification

• High pressure resistance • Excellent chemical properties • Very good electrical parameters • Flexibility and thus easy processing • Excellent resistance to alkalis and acids, short chain alcohols, aqueous salt solutions, synthetic detergents, spirits, fruit juices and milk

• Extremely good impact toughness • Good coefficient of sliding friction (low static friction) • Antiadhesive surface • Good abrasion resistance • Good mechanical stability • Good dielectric properties • Good chemical resistance • Low density • High molecular weight

Technical specification

• Material: PE, soft (polyethylene, soft, uncrosslinked) • Colour: natural translucent • Shore hardness D: 43° ±5° (DIN 53505) • Temperature range: -40 to +80 °C • Volume resistivity: 1017 Ohm x cm (DIN 53482) • Dielectric strength: 750 kV/cm (DIN 53482) • Dielectric loss factor at 10h6 Hz: <2 x 10-4 (DIN 53483) • Elongation at break: 650 % (DIN 53455) • Yield stress: 10 N/mm3 (DIN 53455) ​

Technical specification

• Material: LDPE (polyethylene of low density, uncrosslinked) • Colour: milky-translucent or black • Temperature range: -30 to +70 °C, for a short time up to +80 °C • Density: 0.925 g/cm3 (DIN 53479)

THOMAFLUID® II - 2015 45

Tubing - PE Tubing

Tubing and Pipes made of Rigid Plastics

• Shore hardness D: 45° (DIN 53505) • Tensile strength: 20 MPa (DIN 53455) • Elongation at break: 650 % (ASTM D-882) • Yield stress: 10 MPa (ASTM D-882) • E-modulus: 200 MPa (ASTM D-882) • Vicat softening temperature: 96 °C (ISO 306, method A)

Item ​

​

Item ​ 339652 339653 26140 26141 26142 26143 26128 26129 26130 26131 26152 26153 26154 26155 26164 26165 26166 26167 26168 26169 26176 26177 26178 26179 26188 26189 26190 26191 26192 26193 26194 26195 26196 26197 26198 26199 26200 26201 26202 26203 26212 26213 26224 26225 26236 26237 26238 26239 26248

Inside Ø mm 1 1 2 2 2 2 2.5 2.5 2.5 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 4 4 5 5 5 5 6

Outside Max. op. Colour Ø pressure1 mm bar ​ 2 2 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 8

46 THOMAFLUID® II - 2015

30 30 20 20 20 20 14 14 14 14 9 9 9 9 15 15 15 15 15 15 20 20 20 20 13 13 13 13 13 13 13 13 13 13 13 13 16 16 16 16 9 9 20 20 13 13 13 13 8

nature nature nature nature black black nature nature black black nature nature black black nature nature black black red red nature nature black black nature nature black black red red blue blue yellow yellow green green nature nature black black nature nature nature nature nature nature black black nature

Unit

Price

m

EURO

5 15 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5

28.00 56.00 12.00 23.00 12.00 23.00 12.00 23.00 12.00 23.00 12.00 23.00 12.00 23.00 13.00 25.00 13.00 25.00 13.00 25.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 15.00 37.00 17.00 40.00 17.00 40.00 17.00

26249 26250 26251 26252 26253 26254 26255 26256 26257 26258 26259 26260 26261 26272 26273 26274 26275 26284 26285 26286 26287 26296 26297 26298 26299 26300 26301 26302 26303 26304 26305 26308 26309 26310 26311 26320 26321 26322 26323 26332 26333 26334 26335 26344 26345 26346 26347 26356 26357 26368 26369 1

at +20 °C

Inside Ø mm 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 10 10 10 10 10 10 11 11

Outside Max. op. Colour Ø pressure1 mm bar ​ 8 8 8 8 8 8 8 8 8 8 8 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 11 11 11 11 11 11 11 12 12 12 12 12 12 12 12 14 14 14 14

8 8 8 8 8 8 8 8 8 8 8 12 12 15 15 15 15 10 10 10 10 6 6 6 6 6 6 6 6 6 6 9 9 9 9 6 6 6 6 9 9 9 9 5 5 5 5 10 10 7 7

nature black black red red blue blue yellow yellow green green nature nature nature nature black black nature nature black black nature nature black black red red blue blue yellow yellow nature nature black black nature nature black black nature nature black black nature nature black black nature nature nature nature

Unit

Price

m

EURO

20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20 5 20

40.00 17.00 40.00 17.00 40.00 17.00 40.00 17.00 40.00 17.00 40.00 19.00 42.00 19.00 42.00 19.00 42.00 19.00 42.00 19.00 42.00 19.00 42.00 19.00 42.00 19.00 42.00 19.00 42.00 19.00 42.00 24.00 55.00 24.00 55.00 24.00 55.00 24.00 55.00 24.00 55.00 24.00 55.00 27.00 56.00 27.00 56.00 34.00 83.00 34.00 83.00

Tubing - PE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-LDPE Chemical Tubing - imperial

Item

Product specification

​

• Outstanding impact toughness • Best abrasion resistance • Very good mechanical stability • Good coefficient of sliding friction (thus low static friction) • Antiadhesive surface • Good dielectric properties • Good chemical resistance • Neutral in taste and odour • Lowest permeability to steam

339726 339727 339728 339729 1

Inside Ø mm 15.9 15.9 15.9 15.9

Outside Max. op. Colour Ø pressure1 mm bar ​ 19 19 19 19

3 3 3 3

Unit

nature nature black black

Price

m

EURO

5 15 5 15

92.00 238.00 94.00 242.00

at +20 °C

THOMAFLUID®-High-Tech-PE Tubing for Medical Engineering

Technical specification

• Material: LDPE (polyethylene of low density, highly cross-linked) • Colour: natural or black (UV-resistant) • Shore hardness D: 55° (DIN 53505) • Temperature range: -50 to +90 °C, for a short time up to +120 °C

Application area

• Medical engineering, analytical technology, hospital technology, sterile technology

​

Product specification

• Extraordinary softness (flexibility) combined with highest resistance • Good abrasion resistance • Antiadhesive surface (smooth-walled) • Good impact resistance - also at low temperatures • Medically pure, non-toxic, atraumatic • Neutral in flavour and odour • Low permeability to steam combined with extremely low O2- and CO2-permeability • Chemical resistance according to DIN 16934

Technical specification Item ​ 339698 339699 339700 339701 339702 339703 339704 339705 339706 339707 339708 339709 339710 339711 339712 339713 339714 339715 339716 339717 339718 339719 339720 339721 339722 339723 339724 339725

Inside Ø mm 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 4.4 4.4 4.4 4.4 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4 9.5 9.5 9.5 9.5 12.7 12.7 12.7 12.7

Outside Max. op. Colour Ø pressure1 mm bar ​ 3.2 3.2 3.2 3.2 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 9.5 9.5 9.5 9.5 12.7 12.7 12.7 12.7 15.9 15.9 15.9 15.9

20 20 20 20 20 20 20 20 12 12 12 12 7 7 7 7 12 12 12 12 9 9 9 9 6 6 6 6

nature nature black black nature nature black black nature nature black black nature nature black black nature nature black black nature nature black black nature nature black black

Unit

Price

m

EURO

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

28.00 74.00 30.00 84.00 32.00 88.00 36.00 92.00 32.00 88.00 36.00 92.00 32.00 88.00 36.00 92.00 40.00 108.00 46.00 118.00 54.00 140.00 58.00 156.00 68.00 186.00 74.00 196.00

• Material: PE, soft (polyethylene) • Colour: translucent • Temperature range: -20 to +80 °C, for a short time +100 °C • Elongation at break: 450 % • Tolerance: up to item 10059: ±0.08 mm; from item 28497: ±0.13 mm ​

Item ​ 28457 28458 28459 28460 28461 28462 28463 28464 28465 28466 28467 28468 28469

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

0.2 0.2 0.28 0.28 0.38 0.38 0.4 0.4 0.5 0.5 0.5 0.5 0.5

0.5 0.5 0.61 0.61 1.09 1.09 0.8 0.8 0.9 0.9 1 1 1.5

13.6 13.6 11.5 11.5 14.5 14.5 9.4 9.4 8.3 8.3 9.7 9.7 18.7

5 15 5 15 5 15 5 15 5 15 5 15 5

50.00 118.00 50.00 118.00 50.00 118.00 50.00 118.00 50.00 118.00 50.00 118.00 61.00

THOMAFLUID® II - 2015 47

Tubing - PE Tubing Item ​ 28470 28471 28472 28473 28474 28475 28476 28477 28478 28479 28480 28481 28482 28483 28484 28485 28486 28487 28488 28491 28492 10058 10059 28497 28498 10064 10065 10068 10069 10078 10079 1

Tubing and Pipes made of Rigid Plastics

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

0.5 0.58 0.58 0.75 0.75 0.8 0.8 0.86 0.86 0.86 0.86 0.97 0.97 1 1 1.02 1.02 1.19 1.19 1.5 1.5 1.67 1.67 2 2 2.45 2.45 3 3 7.5 7.5

1.5 0.96 0.96 1.45 1.45 1.2 1.2 1.27 1.27 1.52 1.52 1.27 1.27 1.5 1.5 1.98 1.98 1.7 1.7 2.5 2.5 2.42 2.42 3 3 3.7 3.7 3.88 3.88 9.68 9.68

18.7 6.5 6.5 15.6 15.6 5.8 5.8 5.8 5.8 7.3 7.3 7.1 7.1 8.2 8.2 9.7 9.7 5.3 5.3 6.9 6.9 5.5 5.5 5.9 5.9 5.5 5.5 3.5 3.5 3.4 3.4

15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

144.00 61.00 144.00 61.00 144.00 61.00 144.00 61.00 144.00 61.00 144.00 61.00 144.00 61.00 144.00 61.00 144.00 61.00 144.00 71.00 167.00 71.00 167.00 71.00 167.00 71.00 167.00 71.00 167.00 100.00 246.00

Technical specification

• Material: PE, soft (polyethylene, soft) • Colour: transparent • Temperature range: -50 to +80 °C, for a short time +100 °C Item ​ 10080 10081 10084 10085 10086 10087 1

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

0.76 0.76 1.5 1.5 1.57 1.57

1.22 1.22 2.7 2.7 2.08 2.08

6.2 6.2 7.3 7.3 3.4 3.4

3 9 3 9 3 9

68.00 174.00 91.00 233.00 91.00 233.00

at +20 °C

THOMAFLUID®-LDPE Tubing for Food Applications tolerated outside Product specification

• FDA-approved material for food applications • Extremely gastight • Absolutely odourless and neutral in taste • High resistance to aggressive and corrosive media

Technical specification

• Material: LDPE (polyethylene of low density, highly cross-linked) • Colour: natural • Shore hardness D: 44° • Temperature range: -40 to +60 °C • Tolerance outside Ø: ±0.10 mm • Regulations: FDA ​

at +20 °C

THOMAFLUID®-High-Tech-PE Radiographic Contrast Tubing for Medical Engineering Product specification

• Conveying tubing.

• Outstanding tissue tolerance due to superior surface properties causing only minimal impact on blood cells.

• No negative influence on physical properties by radiation (sterilization).

• Extraordinary softness (flexibility).

• Medically pure, non-toxic, atraumatic.

• Neutral in taste and odour. ​

Item ​

inch

339690 339691 339692 339693 339694 339695 339696 339697 1

48 THOMAFLUID® II - 2015

Inside Ø

at +20 °C

1/16“ 1/16“ 11/64“ 11/64“ 1/4“ 1/4“ 3/8“ 3/8“

Outside Max. op.

Min. Ø pressure1 bending radius inch bar mm 1/8“ 1/8“ 1/4“ 1/4“ 3/8“ 3/8“ 1/2“ 1/2“

18 18 12 12 10 10 7 7

13 13 32 32 50 50 64 64

Unit

Price

m

EURO

5 15 5 15 5 15 5 15

38.00 94.00 43.00 109.00 50.00 128.00 64.00 160.00

Tubing - PE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-High-Tech-LLDPE Tubing for Drinking Water Supply

Item

I-Ø

Application area

​ 303196 303197 303198 303199 303200 330001 330002 330003 330004 330005 330006 330007 330008 330172 330173 330174 330175 330176 330177 330178 330179 330180 330181 330182 330183 330184 330185 330186 330187 330009 330010 330011 330012 330013 330014 330015 330016 330017 330018 330019 330020 330021 330022 330023 330024 330188 330189 330190 330191 330192 330193 330194 330195

• drinking water supply, drinking water purification, domestic engineering, food technology, biotechnological plants

Product specification

• High flexibility • High pressure resistance • Good abrasion resistance • Good vibration and impact strength • Antiadhesive surface (smooth-walled) • Resistant to aging • Non-toxic • Odorless and tasteless • Low permeability to steam combined with extremely low O2- and CO2-permeability

Technical specification

• Material: LLDPE (linear polyethylene of low density, highly crosslinked) • Colour: transparent, blue, red, black • Temperature range: -30 to +65 °C • Tolerances outside Ø: 6-12 mm: +0.05 / -0.10 mm • Regulations: approval according to DVGW worksheet W 270, KTW, NSF and WRC ​

Item

I-Ø

​ 302120 302121 302122 302123 302124 302125 302126 302127 303093 303094 303095 303096 303097 303098 303099 303100 303193 303194 303195

O-Ø

Unit

mm

Max. op. Min. Colour pressure1 bending radius mm bar mm ​

m

EURO

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 4.4 4.4 4.4

4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6.4 6.4 6.4

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5

35.00 87.00 35.00 87.00 35.00 87.00 35.00 87.00 42.00 106.00 42.00 106.00 42.00 106.00 42.00 106.00 42.00 106.00 42.00

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 26 26 26

nature nature blue blue red red black black nature nature blue blue red red black black nature nature blue

Price

1

O-Ø

Unit

mm

Max. op. Min. Colour pressure1 bending radius mm bar mm ​

m

EURO

4.4 4.4 4.4 4.4 4.4 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6 6 6 6 6 6 6 6 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 7 7 7 7 7 7 7 7 9 9 9 9 9 9 9 9 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5

6.4 6.4 6.4 6.4 6.4 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 8 8 8 8 8 8 8 8 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7

15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

106.00 42.00 106.00 42.00 106.00 48.00 118.00 48.00 118.00 48.00 118.00 48.00 118.00 53.00 127.00 53.00 127.00 53.00 127.00 53.00 127.00 55.00 132.00 55.00 132.00 55.00 132.00 55.00 132.00 58.00 146.00 58.00 146.00 58.00 146.00 58.00 146.00 68.00 168.00 68.00 168.00 68.00 168.00 68.00 168.00 68.00 168.00 68.00 168.00 68.00 168.00 68.00 168.00

16 16 16 16 16 16 16 16 16 16 16 16 16 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

26 26 26 26 26 29 29 29 29 29 29 29 29 30 30 30 30 30 30 30 30 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 63 63 63 63 63 63 63 63 64 64 64 64 64 64 64 64

blue red red black black nature nature blue blue red red black black nature nature blue blue red red black black nature nature blue blue red red black black nature nature blue blue red red black black nature nature blue blue red red black black nature nature blue blue red red black black

Price

at +20 °C

THOMAFLUID® II - 2015 49

Tubing - PE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-LDPE/EVA Pharmaceutical Composite Tubing

THOMAFLUID®-LDPE/EVA Pharmaceutical Composite Tubing - High-Temperature

Application area

Product specification

• Pharmaceutical industry, biotechnology, chemical industry, biochemical process technology

Product specification

• Pressure tubing.

• Liner is inert and neutral, tasteless and odourless.

• Liner does not absorb liquids.

• Liner meets the requirements of FDA, USDA, National Formulary, and the USP-Standards for food, beverages, pharmaceutical products, laboratory and medical equipment.

• Non-toxic.

• Jacket is resistant to abrasion and aging.

• Neither the jacket nor the liner contain plasticizers or vinyl chloride.

Technical specification

• Material: Liner: LDPE (polyethylene of low density, highly cross-linked) Jacket: EVA (ethylene vinyl acetate) • Colour: translucent • Temperature range: -35 to +70 °C • Embrittlement temperature: -51 °C • Resistance to aging: very good • Mechanical behaviour: flexible • Sterilization: gas (ethylene oxide); gamma-rays

• Liner is inert and neutral, tasteless and odourless, liner does not absorb liquids, liner meets the requirements of FDA, USDA, National Formulary, and the USP-Standards for food, beverages, pharmaceutical products, laboratory and medical equipment.

• Non-toxic.

• Jacket is resistant to abrasion and aging.

• Neither the jacket nor the liner contain plasticizers or vinyl chloride.

Technical specification

• Material: Liner: LDPE (polyethylene of low density, highly cross-linked) Jacket: EVA (ethylene vinyl acetate, highly cross-linked) • Colour: translucent • Temperature range: -35 to +95 °C • Embrittlement temperature: -51 °C • Resistance to aging: very good • Mechanical behaviour: flexible • Hemolysis: none

​

​

Item ​

Item ​ 28000 28001 28002 28003 28006 28007 28008 28009 28010 28011 28012 28013 28014 28015 28016 28017 1

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit m

EURO

3.2 3.2 3.2 3.2 6.4 6.4 9.5 9.5 9.5 9.5 12.7 12.7 12.7 12.7 19 25.4

4.8 4.8 6.4 6.4 9.5 9.5 12.7 12.7 15.9 15.9 15.9 15.9 19 19 25.4 31.8

3.3 3.3 5.5 5.5 4.5 4.5 4 4 5 5 2.5 2.5 4 4 3 2

5 15 5 15 5 15 5 15 5 15 5 15 5 15 15 15

41.00 108.00 59.00 154.00 95.00 246.00 100.00 261.00 151.00 394.00 151.00 394.00 190.00 420.00 542.00 660.00

at +20 °C

Price

28019 28020 28021 28022 28023 28024 28027 28028 28029 28030 28031 28032 28035 28036 28037 28038 28039 28040 28041 28042 28045 28046 28047 28048 1

50 THOMAFLUID® II - 2015

at +20 °C

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

1.6 1.6 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8 6.4 6.4 7.9 7.9 9.5 9.5 9.5 9.5 12.7 12.7 12.7 12.7 19 25.4

4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4 7.9 7.9 9.5 9.5 11.1 11.1 12.7 12.7 15.9 15.9 15.9 15.9 19 19 25.4 31.8

6.5 6.5 3.3 3.3 5.5 5.5 3 3 4.5 4.5 4.5 4.5 4.2 4.2 4 4 5 5 2.5 2.5 4 4 3 2

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 15 15

98.00 241.00 100.00 284.00 113.00 284.00 113.00 284.00 149.00 356.00 162.00 389.00 202.00 445.00 202.00 445.00 236.00 537.00 236.00 537.00 302.00 727.00 1,018.00 1,355.00

Tubing - PE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-High-Tech-HDPE Chemical Tubing calibrated

THOMAFLUID®-High-Tech-HDPE Chemical Tubing coloured

Application area

Application area

• Protective tubing, compressed air control tubing, low pressure lines, excess pressure tubing, riser tube for aerosol valves, water technology, pneumatic conduits at laser equipment, supply lines

Product specification

• Considerably lower tendency to stress cracking compared to LDPE • Excellent mechanical properties, calibrated • Extremely good impact strength • Lowest static friction (good coefficient of sliding friction) • Lowest water absorption • Very good dielectric properties • High chemical resistance • High purity • Physiologically safe • High density • Highest stiffness • High working pressure

Technical specification

• Apparatus engineering, process engineering, gas engineering, chemical engineering

Product specification

• High density • Good weldable (laboratory and container building) • Hardly absorbs water, floats on the water • Very low permeability to gas and steam • Good mechanical stability, good dimensional stability • High elongation at break and impact resistance • Good sliding behaviour at lowest wear • Very good electrical and dielectrical properties • Burns well and residue-free (CO2 + H2O as combustion products) • Good chemical resistance to nearly all polar solutions, acids, alkalis, alcohols, oils and petrols • UV-resistant (colour code: black)

Technical specification

• Material: HDPE (high density polyethylene) • Colour: white, black, red, green, blue, yellow • Shore hardness D: 66° (DIN 53505) • Temperature range: -50 to +100 °C • Density: 0.94 - 0.97 g/cm3 • Max. operating pressure: 16 bar at +20 °C • E-modulus: ≈1500 N/mm2 at +23 °C • Softening temperature: +135 °C • Flammability rating: UL 94 HB

• Material: HDPE (polyethylene of high density) • Colour: natural • Shore hardness D: 67° (ISO 868) • Temperature range: -30 to +80 °C, for a short time +100 °C • Density: 0.96 g/cm3 (ISO 1183-D) • Bending strength: 1100 MPa (ISO 178) • Tensile strength: 36 MPa (ISO 527) • Elongation at break: 950 % (ISO 527) • Softening temperature: +129 °C (ISO 306-A/120) • Tolerances inside Ø and outside Ø: ±0.10 mm

​

​

Item Item ​

mm

330095 330096 330097 330098 330099 330100 330101 330102 330103 330104 1

Inside Ø

at +20 °C

2 2 4 4 6 6 8 8 10 10

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 4 4 6 6 8 8 10 10 12 12

33 33 20 20 14 14 11 11 9 9

30 30 40 40 50 50 75 75 100 100

Unit

Price

m

EURO

5 15 5 15 5 15 5 15 5 15

112.00 280.00 114.00 286.00 116.00 290.00 122.00 300.00 130.00 324.00

​ 412536 412537 412538 412539 412540 412541 412542 412543 412544 412545 412546 412547 412548 412549 412550 412551

Inside Ø

Outside Ø

Colour

Unit

mm

Min. bending radius mm

mm 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6

Price

​

m

EURO

6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8

30 30 30 30 30 30 30 30 30 30 30 30 40 40 40 40

white white black black red red green green blue blue yellow yellow white white black black

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

32.00 76.00 32.00 76.00 32.00 76.00 32.00 76.00 32.00 76.00 32.00 76.00 36.00 88.00 36.00 88.00

THOMAFLUID® II - 2015 51

Tubing - PE Tubing Item ​ 412552 412553 412554 412555 412556 412557 412558 412559 412560 412561 412562 412563 412564 412565 412566 412567 412568 412569 412570 412571 412572 412573 412574 412575 412576 412577 412578 412579 412580 412581 412582 412583

Tubing and Pipes made of Rigid Plastics

Inside Ø

Outside Ø

Colour

Unit

mm

Min. bending radius mm

mm 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10

Price

​

m

EURO

8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12

40 40 40 40 40 40 40 40 55 55 55 55 55 55 55 55 55 55 55 55 75 75 75 75 75 75 75 75 75 75 75 75

red red green green blue blue yellow yellow white white black black red red green green blue blue yellow yellow white white black black red red green green blue blue yellow yellow

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

36.00 88.00 36.00 88.00 36.00 88.00 36.00 88.00 41.00 99.00 41.00 99.00 41.00 99.00 41.00 99.00 41.00 99.00 41.00 99.00 45.00 109.00 45.00 109.00 45.00 109.00 45.00 109.00 45.00 109.00 45.00 109.00

THOMAFLUID®-Pneumatic/Hydraulic Piping Application area

• Flexible piping for pneumatic and hydraulic control systems and for conveyance of aqueous and gaseous media

Product specification

• Especially formulated, metrically calibrated polymer pipe especially for use with THOMAFLUID® quick-release pipe couplings. Non-leachable, free of plasticizers, resistant to oil and ozone, not embrittling. High mechanical stability and abrasion resistance. Elastic, impact-resistant and pressure loadable. ​

52 THOMAFLUID® II - 2015

Technical specification

• Colour: white, black, red, green, blue or yellow • Temperature range: -70 to +70 °C • Tolerances outside Ø: 4-5 mm: -0.05 to -0.07 mm; 5-14 mm: -0.1 to +0.05 mm Item

I-Ø

​

mm

47220 47221 47224 47225 47226 47227 47228 47230 47231 47232 47233 47234 47235 47240 47241 47242 47243 47244 47245 47246 47247 47248 47249 47252 47253 47254 47255 47258 47259 47260 47261 47264 47265 47266 47268 47269 47270 47271 47272 47273 47274 47275 47278 47279 47280 47281 47282 47283 47284

2 2 4 4 5.5 5.5 6 7.5 7.5 8 8 9 9 2.7 2.7 4 4 5.5 5.5 6 6 7.5 7.5 9 9 11 11 2.7 2.7 4 4 2.7 2.7 4 2 2 2.7 2.7 4 4 5.5 5.5 7.5 7.5 8 8 9 9 11

O-Ø

Max. op. Min. Colour pressure1 bending radius mm bar mm ​ 4 4 6 6 8 8 8 10 10 10 10 12 12 4 4 6 6 8 8 8 8 10 10 12 12 14 14 4 4 6 6 4 4 6 4 4 4 4 6 6 8 8 10 10 10 10 12 12 14

15 15 10 10 7 7 7 7 7 7 7 7 7 12 12 10 10 7 7 7 7 7 7 7 7 6 6 12 12 10 10 12 12 10 15 15 12 12 10 10 7 7 7 7 7 7 7 7 6

10 10 25 25 35 35 40 60 60 70 70 80 80 12 12 25 25 35 35 40 40 60 60 80 80 120 120 12 12 25 25 12 12 25 10 10 12 12 25 25 35 35 60 60 70 70 80 80 120

white white white white white white white white white white white white white black black black black black black black black black black black black black black green green green green red red red blue blue blue blue blue blue blue blue blue blue blue blue blue blue blue

Unit

Price

m

EURO

5 25 5 25 5 25 5 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5 5 25 5 25 5 25 5 25 5 25 5 25 5 25 5

21.00 57.00 31.00 98.00 59.00 177.00 46.00 72.00 213.00 67.00 200.00 105.00 315.00 23.00 59.00 34.00 103.00 59.00 177.00 47.00 141.00 75.00 223.00 110.00 330.00 128.00 384.00 24.00 59.00 34.00 103.00 24.00 59.00 34.00 24.00 59.00 23.00 59.00 34.00 103.00 59.00 177.00 75.00 223.00 72.00 210.00 110.00 330.00 128.00

Tubing - PE Tubing Item

I-Ø

​

mm

47285 47288 47289 47290 47291

11 2.7 2.7 4 4

1

Tubing and Pipes made of Rigid Plastics

O-Ø

Max. op. Min. Colour pressure1 bending radius mm bar mm ​ 14 4 4 6 6

6 12 12 10 10

120 12 12 25 25

blue yellow yellow yellow yellow

Unit

Price

m

EURO

THOMAFLUID®-LDPE Corrugated Tubing Application area

25 384.00 5 24.00 25 59.00 5 34.00 25 103.00

at +20 °C

THOMAFLUID®-PE Antista Double-Wall Jacket Chemical Tubing Product specification

• Suction and pressure tubing.

• Liner: extraordinary chemical resistance to most alkalis, acids, and solvents.

• Jacket: antistatic properties, good abrasion resistance, good resistance to ozone, weather, and aging, good flame resistance.

Technical specification

• Material: Liner: UHMW-PE cross-linked (polyethylene) Jacket: EPDM, smooth, black, textured liner • Colour: inside and outside black • Temperature range: -35 to +90 °C • Insert: polyester braid + 1 spiralized steel wire + 2 Cu woven stranded wires • Vacuum strength: 80 % at +20 °C • Leakage resistance: antistatic interior and exterior, approx. <106 Ohm/m • Marking: according to EN 12115 (Ohm) blue/white longitudinal stripes

• Protection of lines, sucking off of gases, conveyance of liquid media, transport of free-flowing solid matters in moving or vibrating systems or apparatuses, in refrigeration and air-conditioning technology, in construction of medical and chemical equipment and plants, in electrical engineering

Product specification

• Low-weighted corrugated tubing made of „low-density“ polyethylene (LDPE), transparent, black or grey dyed. Flexible, high bending strength and abrasion resistance, impact-resistant also at low temperatures, high dielectric strength. Good resistance to acids, alkalis, salt solutions, unstable to oxidizing agents and solvents, especially to aromatic and halogenated solvents as well as fuels.

• Neutral in taste and odour, biocompatible, physiologically safe.

Technical specification

• Material: LDPE (polyethylene of low density, uncrosslinked) • Temperature range: -40 to +60 °C (DIN 53446) • Density: 0.92 to 0.94 g/cm3 (DIN 53479) • Tearing strength: 9 - 22 N/mm2 (DIN 53455) • Elongation at break: 200 - 650% (DIN 53455) • E-modulus: 150 - 400 N/mm² (DIN 53457) • Impact toughness: without break (DIN 53453) • Notch impact strength: without break (DIN 53453) • Linear expansion coefficient: 2.0 - 2.5 x 10-4 x K-1 (DIN 52523) • Thermal conductivity: 0.33 - 0.38 W/mK (DIN 52612) • Track resistance: KA3b (DIN 53480) • Dielectric strength: 75 - 90 kV/mm (DIN 53481) ​

​

Item

Item ​

mm

12343 12344 12345 12346 12347 12348 12349 12350 12351 12352 12353 12354 1

Inside Ø

at +20 °C

19 19 25 25 32 32 38 38 50 50 75 75

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 31 31 37 37 44 44 51 51 66 66 91 91

16 16 16 16 16 16 16 16 16 16 16 16

115 115 225 225 265 265 340 340 415 415 525 525

Unit

Price

m

EURO

1 3 1 3 1 3 1 3 1 3 1 3

126.00 298.00 174.00 420.00 182.00 438.00 192.00 457.00 233.00 557.00 276.00 628.00

Inside Ø

Outside Ø

Colour

Unit

mm

Min. bending radius mm

​

mm

43172 43173 43174 43178 43179 43180 43184 43185 43186 43190 43191 43192 43196 43197 43198 43202

6.5 6.5 6.5 9.7 9.7 9.7 11.5 11.5 11.5 14 14 14 16 16 16 6.5

Price

​

m

EURO

9.9 9.9 9.9 12.7 12.7 12.7 15.5 15.5 15.5 18.3 18.3 18.3 20.9 20.9 20.9 9.9

12 12 12 15 15 15 18 18 18 25 25 25 30 30 30 12

nature nature nature nature nature nature nature nature nature nature nature nature nature nature nature black

5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5

27.00 45.00 63.00 28.00 47.00 65.00 33.00 58.00 78.00 40.00 70.00 95.00 47.00 81.00 111.00 27.00

THOMAFLUID® II - 2015 53

Tubing - PE Tubing Item

Tubing and Pipes made of Rigid Plastics

Inside Ø

Outside Ø

Colour

Unit

mm

Min. bending radius mm

​

mm

43203 43204 43205 43206 43207 43208 43209 43210 43214 43215 43216 43217 43218 43219 43220 43221 43222 43223 43224 43225 43226 43227 43228

6.5 6.5 8.3 8.3 8.3 9.7 9.7 9.7 11.5 11.5 11.5 12.4 12.4 12.4 14 14 14 14.6 14.6 14.6 16 16 16

Price

Item

​

9.9 9.9 11.4 11.4 11.4 12.7 12.7 12.7 15.5 15.5 15.5 15.8 15.8 15.8 18.3 18.3 18.3 18.7 18.7 18.7 20.9 20.9 20.9

12 12 12 12 12 15 15 15 18 18 18 20 20 20 25 25 25 25 25 25 30 30 30

black black black black black black black black black black black black black black black black black black black black black black black

m

EURO

​

mm

10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15

45.00 63.00 27.00 45.00 63.00 28.00 47.00 65.00 33.00 58.00 78.00 39.00 68.00 93.00 40.00 70.00 95.00 42.00 73.00 99.00 47.00 81.00 111.00

302807 302808 302809 302810 302811 302812 302813 302814 302815 302816 302817 302818 302819 302820

3.9 3.9 5.3 5.3 6.9 6.9 8.2 8.2 9.8 9.8 10.8 10.8 15 15

THOMAFLUID -Plastic / Metal Composite Tubing ®

Product specification

• Plastic / metal composite tubing for plug-in and clamp fittings • Bendable by hand, yet dimensionally stable • Low weight: weighs only a fraction of conventional metal pipes • No special tools are required for handling and processing • Corrosion resistance is given • Best chemical resistance

Technical specification

1

Inside Ø

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 6 6 8 8 10 10 12 12 14 14 15 15 18 18

30 30 30 30 30 30 24 24 24 24 24 24 17 17

19 19 25 25 32 32 40 40 63 63 70 70 175 175

Unit

Price

m

EURO

5 15 5 15 5 15 5 15 5 15 5 15 5 15

82.00 198.00 126.00 300.00 164.00 370.00 196.00 428.00 230.00 476.00 236.00 492.00 248.00 516.00

at +20 °C

THOMAFLUID®-Net Tubing made of polyethylene for Surface Protection Application area

• For surface protection of precision turned parts such as spindles, rolls, shafts, tools, glass, ceramic and wooden parts.

Product specification

• The net tubing is turnable and elastic, so that step-shaped parts as well are completely enclosed.

• Net tubing coated and packed parts can be transported in cases or containers without any risk.

• Due to net tubing the parts remain visible despite safe packaging.

• Various net tubing colours (colour code) ensure the avoidance of confusion.

• Design: Type: 1 (standard program) Type: 2 (thick-threaded net tubing) Type: 3 (coarse-meshed net tubing) ​

• Material: Liner: HDPE (high density polyethylene) Composite core: Al (aluminium foil) Jacket: HDPE (high density polyethylene) • Colour: black • Temperature range: -25 to +65 °C, for a short time +80 °C • Gas-tightness: no permeability (gas-tight) ​

Item ​ 331257 331258 331259 331260 331261 331262 331263

54 THOMAFLUID® II - 2015

Clamping range mm

Colour ​

Design ​

Unit m

Price EURO

6 - 15 6 - 15 12 - 25 12 - 25 20 - 40 20 - 40 30 - 60

red red blue blue yellow yellow green

1 1 1 1 1 1 1

10 30 10 30 10 30 10

20.00 50.00 28.00 66.00 36.00 88.00 44.00

Tubing - PEEK Tubing Item ​ 331264 331265 331266 331267 331268 331269 331270 331271 331272 331273 331274 331275 331276 331277 331278 331279 331280 331281 331282 331283 331284 331285 331286 331287 331288

Tubing and Pipes made of Rigid Plastics

Clamping range mm

Colour ​

Design ​

Unit m

Price EURO

30 - 60 50 - 100 50 - 100 80 - 120 80 - 120 90 - 200 90 - 200 150 - 300 150 - 300 7 - 15 7 - 15 15 - 25 15 - 25 25 - 50 25 - 50 50 - 100 50 - 100 50 - 100 50 - 100 100 - 200 100 - 200 200 - 350 200 - 350 350 - 500 350 - 500

green red red blue blue yellow yellow red red orange orange blue blue yellow yellow brown brown grey grey green green orange orange blue blue

1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3

30 10 30 10 30 10 30 10 30 10 30 10 30 10 30 10 30 10 30 10 30 10 30 10 30

110.00 52.00 132.00 60.00 148.00 82.00 204.00 148.00 365.00 20.00 50.00 32.00 82.00 36.00 90.00 72.00 178.00 32.00 80.00 48.00 122.00 100.00 252.00 248.00 620.00

Item ​ 14154 14155 14156 14157 14158 14159 14160 14161 14162 14163 14126 14127 14128 14129 14130 14131 14132 14133 14134 14135 14136 14137 1

Inside Outside Outside Max. op. Colour Unit Price Ø Ø Ø pressure1 mm mm inch bar ​ m EURO 0.13 0.13 0.18 0.18 0.25 0.25 0.5 0.5 0.75 0.75 1.6 1.6 1.6 0.75 0.75 0.75 2 2 2 3.2 3.2 3.2

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 6.4 6.4 6.4

1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/4“ 1/4“ 1/4“

420 420 400 400 386 386 350 350 240 240 224 224 224 345 345 345 165 165 165 227 227 227

red red yellow yellow blue blue orange orange green green nature nature nature nature nature nature nature nature nature nature nature nature

1 3 1 3 1 3 1 3 1 3 1 2 3 1 2 3 1 2 3 1 2 3

52.00 100.00 57.00 118.00 57.00 118.00 57.00 118.00 57.00 118.00 113.00 182.00 238.00 113.00 182.00 238.00 100.00 164.00 223.00 200.00 287.00 351.00

at +20 °C

THOMAFLUID®-PEEK High-Pressure Capillary Tube with stripes

PEEK Tubing THOMAFLUID®-PEEK High-Pressure Capillary Tube solid colour Product specification

• Polymer material of highest stability, pressure and impact resistance.

• Chemically inert to acids, alkalis, and solvents, except conc. sulfuric acid and nitric acid.

Technical specification

• Material: PEEK (polyether-etherketone) • Colour: deliverable in red, yellow, blue, orange,green and natural, as homogeneously dyed capillary tubes • Temperature range: -40 to +250 °C, for a short time +300 °C • Density: 1.4 g/cm3 • Design: absolutely mirror-smooth surface • Dielectric strength: 19 kV/mm (according to ASTM D149) • Coefficient of thermal expansion: 4.7 x 10-5 mm/degree

Product specification

• Polymer material of highest stability, yet pliable • Pressure and impact resistant • Free of extractable substances • Odourless and tasteless • Physiologically completely safe, biocompatible • Resistant to acids, alkalis, and organic solvents • Not resistant to conc. sulfuric acid, nitric acid, and chloronitrous acid (aqua regia)

Technical specification

• Material: PEEK (polyether-etherketone) • Colour: red, yellow, blue, orange, green, grey, black; marked with a colour-code stripe • Temperature range: -40 to +250 °C, for a short time +300 °C • Density: 1.4 g/cm3 • Design: absolutely mirror-smooth surface • Dielectric strength: 19 kV/mm (according to ASTM D149) • Coefficient of thermal expansion: 4.7 x 10-5 mm/degree ​

​

THOMAFLUID® II - 2015 55

Tubing - PEEK Tubing Item ​ 14117 14118 14119 83100 83101 83102 83103 83104 83105 83106 83107 83108 83109 83110 83111 14120 14121 14122 14123 14124 14125 1

Tubing and Pipes made of Rigid Plastics

Inside Outside Outside Max. op. Colour Unit Price Ø Ø Ø pressure1 mm mm inch bar ​ m EURO 0.13 0.13 0.13 0.18 0.18 0.18 0.25 0.25 0.25 0.5 0.5 0.5 0.75 0.75 0.75 1 1 1 1.4 1.4 1.4

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“

420 420 420 400 400 400 386 386 386 350 350 350 240 240 240 165 165 165 52 52 52

red red red yellow yellow yellow blue blue blue orange orange orange green green green grey grey grey black black black

1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3

Item ​

44.00 72.00 92.00 52.00 82.00 108.00 52.00 82.00 108.00 52.00 82.00 108.00 52.00 82.00 108.00 52.00 82.00 108.00 52.00 82.00 108.00

43868 43869 43870 43871 43872 43874 43875 43876 43877 43878 43880 43881 43882 43883 43884 43886 43887 43888 43889

at +20 °C

Inside Ø mm

Block length mm

Total length mm

Colour

Unit

Price

​

piece

EURO

0.18 0.18 0.18 0.18 0.25 0.25 0.25 0.25 0.25 0.51 0.51 0.51 0.51 0.51 0.76 0.76 0.76 0.76 0.76

150 170 225 250 100 150 170 225 250 100 150 170 225 250 100 150 170 225 250

600 800 1,100 1,300 400 600 800 1,100 1,300 400 600 800 1,100 1,300 400 600 800 1,100 1,300

yellow yellow yellow yellow blue blue blue blue blue orange orange orange orange orange green green green green green

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

151.00 151.00 177.00 207.00 118.00 151.00 151.00 177.00 207.00 118.00 151.00 151.00 177.00 207.00 118.00 151.00 151.00 177.00 208.00

PFA Tubing

THOMAFLUID®-High-Tech-PEEK Spiral Capillary Tubing

THOMAFLUID®-PFA Tubing

Product specification

Application area

• Permanently helically coiled capillary piping made of high-tech polymer material PEEK (polyether-etherketone), with straight ends of 15 cm length on both sides.

• High pressure loadable to min.150 bar.

• Outside diameter of the capillary piping 1.6 mm (1/16”), graduated inside diameters from 0.13 to 0.76 mm, externally colour-coded.

• Chemically resistant to acids (except conc. sulfuric acid and nitric acid) and biocompatible.

​

• Conveyance of fluids of all kinds and quality in laboratories and pilot plants as well as in small production units.

• Connection of equipments and systems under extreme thermal and environmental influences.

• Connecting tubing for equipments of super-clean room technology and radiochemistry.

General product specification

• Flexible fluorocarbon tubing of high thermal, chemical, and mechanical stability, free of extractable constituents. Small flow resistance and only slight tendency to adhesion of solid matter due to smooth inner surface with antiadhesive properties. Electrically non-conducting, resistant to aging even under unfavourable environmental conditions such as moisture, vapours of solvents and acids, radioactive radiation, and weather effects.

• Chemically resistant to amines, aldehydes, carboxylic acids, esters of carboxylic acids, dioxane, halogenes, halogenated solvents, conc. mineral acids, nitric oxides, oxygen, sulfur dioxide, sulfur trioxide, carbon disulfide, hydrogen sulfide, hydrogen peroxide, aqueous salt solution of every concentration. ​

Item ​ 43860 43862 43863 43864 43865 43866

Inside Ø mm

Block length mm

Total length mm

Colour

Unit

​

0.13 0.13 0.13 0.13 0.13 0.18

100 150 170 225 250 100

400 600 800 1,100 1,300 400

red red red red red yellow

56 THOMAFLUID® II - 2015

Price

THOMAFLUID®-PFA Chemical Tubing

piece

EURO

1 1 1 1 1 1

118.00 151.00 151.00 177.00 207.00 118.00

Application area

• Apparatus construction, process technology, machine engineering

Product specification

• Pressure tubing • Good temperature resistance, good chemical resistance • Good dielectric properties • Thermoplastic, therefore suitable for welding • Antiadhesive surface

Tubing - PFA Tubing

Tubing and Pipes made of Rigid Plastics

Technical specification

Item

• Material: PFA (perfluoroalkoxy) • Colour: natural, translucent • Temperature range: -260 to +260 °C, for a short time +285 °C

​ 10268 25550 10269 25551 25552 45256 45257 45258 10250 10251 45271 45272 25553 10270 25554 10271 25555 25556 10252 10253 45259 45260 45261 45274 45275 10272 10273 45262 45263 45264

​

Item ​ 25531 25532 10254 25533 10255 45250 25537 10256 25538 10257 25539 25540 45265 45266 10260 10261 10244 10245 10242 10243 25541 10262 25542 10263 25543 25544 45253 45254 45255 25545 10266 25546 10267 25547 25548 10246 10247 45268 45269 25549

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

0.8 0.8 0.8 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.6 3.6 4 4 4 4 4 4 4 4 4.8 4.8 4.8 5.6 5.6 5.6 5.6 5.6 5.6 6 6 6.4 6.4 6.4

1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.2 3.2 3.2 6.4 6.4 6.4 6.4 6 6 6 6 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 7.9 7.9 7.9 7.9 7.9 7.9 8 8 9.5 9.5 9.5

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 14 14 12 12 14 14 14 14 14 14 9 9 9 11 10 11 10 11 11 9 9 12 12 12

0.9 2.5 3 7.5 9 1.5 2.5 3 5 9 15 30 0.9 1.5 3 9 3 9 3 9 2.5 3 5 9 15 30 0.9 1.5 3 2.5 3 5 9 15 30 3 9 0.9 1.5 2.5

m

Price EURO 29.00 73.00 48.00 195.00 125.00 35.00 53.00 54.00 90.00 150.00 231.00 417.00 72.00 95.00 119.00 291.00 119.00 284.00 98.00 244.00 154.00 137.00 277.00 298.00 704.00 1,197.00 46.00 67.00 108.00 379.00 153.00 568.00 356.00 1,325.00 2,273.00 119.00 284.00 67.00 106.00 167.00

1

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

6.4 6.4 6.4 6.4 6.4 8 8 8 8 8 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 10 10 11.1 11.1 11.1 15.9 15.9 15.9 15.9 17.5 17.5 17.5

9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 10 10 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12 12 12.7 12.7 12.7 19 19 19 19 19 19 19

12 12 12 12 12 5.5 5.5 5.5 7 7 9 9 9 9 9 9 9 9 6 6 4.5 4.5 4.5 6 6 6 6 2.5 2.5 2.5

3 5 9 15 30 0.9 1.5 3 3 9 0.9 1.5 2.5 3 5 9 15 30 3 9 0.9 1.5 3 0.9 1.5 3 9 0.9 1.5 3

m

Price EURO 158.00 270.00 381.00 729.00 1,312.00 69.00 92.00 141.00 153.00 356.00 98.00 121.00 151.00 186.00 267.00 426.00 722.00 1,299.00 159.00 371.00 92.00 123.00 190.00 113.00 159.00 208.00 497.00 113.00 144.00 202.00

at +20 °C

THOMAFLUID®-PFA Chemical Tubing black and imperial ​

Item ​ 25561 10264 25562 10265 25563 25564 25565

Inside Ø inch

Outside Ø inch

Unit m

Price EURO

5/32“ 5/32“ 5/32“ 5/32“ 5/32“ 5/32“ 7/32“

1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 5/16“

2.5 3 5 9 15 30 2.5

223.00 259.00 334.00 549.00 780.00 1,335.00 390.00

THOMAFLUID® II - 2015 57

Tubing - PFA Tubing Item ​ 25566 25567 25568 25569 25570 25571 25572 25573 25574 25575 25576

Tubing and Pipes made of Rigid Plastics

Inside Ø inch

Outside Ø inch

Unit m

Price EURO

7/32“ 7/32“ 7/32“ 1/4“ 1/4“ 1/4“ 1/4“ 3/8“ 3/8“ 3/8“ 3/8“

5/16“ 5/16“ 5/16“ 3/8“ 3/8“ 3/8“ 3/8“ 1/2“ 1/2“ 1/2“ 1/2“

5 15 30 2.5 5 15 30 2.5 5 15 30

588.00 1,368.00 2,347.00 438.00 656.00 1,532.00 2,623.00 609.00 916.00 2,138.00 3,661.00

Item ​

Product specification

Technical specification

mm

334202 12359 12360 334203 12361 12362 334204 12363 12364 334205 12367 12368 334206 12369 12370 334207 334208 334209 334210

THOMAFLUID®-High-Chem-PFA Corrugated Tubing with Cylindrical End Pieces • Conveying tubing for flexible tubing connections.

• Extremely small bending radii guaranteed.

• Tubing ends fitted with cylindrical end pieces allowing connection with THOMAFLUID® pipe connectors.

• Universal resistance to organic and anorganic media.

• Continuous mechanical movements may lead to increased wear of the bonded connection.

Nominal width

1

10 13 13 13 14 14 14 16 16 16 19 19 19 21 21 21 23 23 23

I. D. O. D. Max. op. Min. Unit Price end end press.1 bending fitting fitting radius1 mm mm bar mm m EURO 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20.9 20.9 20.9

mm

333939 333940 334200 12355 12356 334201 12357 12358

4.5 4.5 4.5 8 8 8 10 10

4 4 4 8 8 8 10 10

58 THOMAFLUID® II - 2015

1.7 1.7 1.7 2 2 2 2 2

5 5 5 15 15 15 18 18

258.00 136.00 188.00 316.00 144.00 210.00 370.00 164.00 226.00 394.00 226.00 284.00 534.00 226.00 284.00 624.00 360.00 456.00 726.00

• Usable in explosive ambiance (explosion protection) • For easy handling of liquids and gases • For transport of solvents and alcohols • For compensation of thermal expansions

Product specification

• Antistatic conveying tubing for flexible tubing connections.

• Usable in explosive ambiance (explosion protection).

• Tubing ends with cylindrical end pieces, thus directly adaptable to clamp fittings (THOMAFLUID®-pipe connections).

• Small bending radii at room temperature (+23 °C).

• Absolutely non-porous.

• Absolutely resistant to organic and anorganic media.

• Tight bending radii only cause little surface changes.

• It is recommended to restrict the maximum operating pressure to 25 % of the burst pressure. For higher temperatures, this value has to be multiplied by a reduction factor.

I. D. O. D. Max. op. Min. Unit Price end end press.1 bending fitting fitting radius1 mm mm bar mm m EURO 2 2 2 6 6 6 8 8

2.5 0.5 1 2.5 0.5 1 2.5 0.5 1 2.5 0.5 1 2.5 0.5 1 2.5 0.5 1 2.5

at +23 °C

Technical specification

​

18 23 23 23 25 25 25 28 28 28 32 32 32 35 35 35 40 40 40

Application area

​

Nominal width

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1.2 1.2 1.2

THOMAFLUID®-High-Chem-PFA Antista Corrugated Tubing with Cylindrical End Pieces

• Material: PFA (perfluoroalkoxy) • Colour: translucent to clear • Temperature range: -270 to +260 °C • Density: 2.12 g/cm3 • Tearing strength: 16 to 32 N/mm2 • E-modulus: 200 to 800 N/mm2 • Linear expansion coefficient: 1.2 to 1.7 x 10-5 x K-1 • Thermal conductivity: 0.24 W/mK • Dielectric strength: >20 kV/mm • Design: with cylindrical end pieces 40 mm length

Item

10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20 25.4 25.4 25.4

0.5 1 2.5 0.5 1 2.5 0.5 1

111.00 146.00 220.00 118.00 156.00 242.00 126.00 166.00

• Material: PFA-Ex (perfluoroalkoxy) • Colour: black • Temperature range: -270 to +260 °C • Density: 2.12 g/cm3 • Burst pressure: 13 bar (at +23 °C) • Tearing strength: 16 to 32 N/mm2 • Elastic modulus: 200 to 800 N/mm2 • Thermal conductivity: 0.24 W/mK • Surface resistance: 105 Ohm • Design: with cylindrical end pieces ​

Tubing - PFA Tubing

Item

Nominal width

​ 334215 334216 334217 334218 334219 334220 334221 334222 334223 334224 334225 334226 1

Tubing and Pipes made of Rigid Plastics

O. D. end fitting mm

Min. bending radius1 mm

Unit

mm

I. D. end fitting mm

Price

Item

10 10 10 10 10 10 10 10 10 10 10 10

4 4 4 6 6 6 8 8 8 10 10 10

6 6 6 8 8 8 10 10 10 12 12 12

18 18 18 18 18 18 18 18 18 18 18 18

m

EURO

​

0.5 1 2.5 0.5 1 2.5 0.5 1 2.5 0.5 1 2.5

174.00 300.00 684.00 178.00 302.00 692.00 182.00 308.00 694.00 196.00 314.00 698.00

at +23 °C

334230 334231 334232 334233 334234 334235 334236 334237 334238 334239 1

Inside Ø

Outside Ø

mm

mm

2 2 4 4 6 6 8 8 10 10

3 3 6 6 8 8 10 10 12 12

Min. Bursting Unit bending pressure1 radius1 mm bar m 15 15 25 25 50 50 80 80 130 130

57 57 57 57 41 41 32 32 27 27

5 10 3 6 2 4 2 4 2 4

Price EURO 106.00 188.00 188.00 362.00 178.00 318.00 228.00 436.00 276.00 498.00

at +23 °C

THOMAFLUID®-High-Tech-PFA Corrugated Tubing

THOMAFLUID®-High-Chem-PFA Antista Chemical Tubing

Application area

Application area

• Highly flexible, self-supporting, and dimensionally stable corrugated tubing made of transparent perfluoroalkoxy copolymer PFA/TFA with circular waves concentrically arranged around the longitudinal axis.

• Temperature loadable, radiation and weather resistant, chemically resistant also to corrosive materials and solvents, except to higher-halogenated hydrocarbons and aromatics; free of leachable constituents, biocompatible.

• Usable in explosive ambiance (explosion protection) • Conveying tubing for antistatic applications • For transport of highly flammable solvents and alcohols • For transport of highly pure chemicals and gases • For compensation of thermal expansions

Product specification

• Transparent tubing for antistatic applications.

• Absolutely smooth and non-porous interior surface.

• The flowing product is only exposed to PFA. • PFA is physiologically safe and non-toxic.

• Fitted with black longitudinal conductive stripes on the outer surface.

• No contamination and no chemical restrictions due to the outer conducting stripes.

• Clear visibility of the flowing product.

• Resistant to organic and anorganic solutions.

• Good dielectrical properties.

• Thermoplastic, therefore suitable for welding.

• It is recommended to restrict the maximum operating pressure to 25 % of the burst pressure. For higher temperatures, this value has to be multiplied by a reduction factor.

Technical specification

• Material: PFA (perfluoroalkoxy) • Colour: transparent • Temperature range: -200 to +250 °C • Leakage resistance: 106 Ohm • Design: with black longitudinal conductive stripes • Regulations: conforming to FDA ​

• Flexible tubing connections at mobile and vibration-exposed equipments

Product specification

Technical specification

• Material: PFA (perfluoroalkoxy) • Temperature range: -200 to +250 °C • Density: 2.12 - 2.17 g/cm3 • Tearing strength: 15 - 32 N/mm2 • Elongation at break: 200 - 400 % • E-modulus: 200 - 800 N/mm2 • Linear expansion coefficient: 1.2 to 1.7 x 10-5 x K-1 • Thermal conductivity: 0.22 - 0.25 W/mK • Track resistance: KA3c • Dielectric strength: >20 kV/mm ​

THOMAFLUID® II - 2015 59

Tubing - PI Tubing

Tubing and Pipes made of Rigid Plastics

Item Nominal Inside Outside Wall Min. Unit width Ø Ø thick- bending ness radius ​ mm mm mm mm mm m 48286 48287 48288 48289 48290 48291 48292 48293 48294 48295 48296 48297 48298 48299 48300 48301 48302 48303 48304 48305 48306

8 8 8 10 10 10 13 13 13 14 14 14 16 16 16 17 17 18 18 21 21

7.7 7.7 7.7 9.7 9.7 9.7 12.4 12.4 12.4 13.7 13.7 13.7 15.4 15.4 15.4 16.5 16.5 18.4 18.4 19.8 19.8

10.7 10.7 10.7 13 13 13 16.1 16.1 16.1 17.8 17.8 17.8 19.7 19.7 19.7 21.1 21.1 23.1 23.1 24.8 24.8

2.2 2.2 2.2 2.2 2.2 2.2 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.5 3.5 3.5 3.5 3.5 3.5

15 15 15 18 18 18 23 23 23 25 25 25 28 28 28 30 30 32 32 35 35

1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 1 5 1 5

Price EURO 56.00 160.00 263.00 61.00 172.00 284.00 84.00 240.00 395.00 94.00 270.00 446.00 119.00 338.00 557.00 119.00 338.00 132.00 375.00 143.00 405.00

Technical specification

• Material: PI (polyimide) • Temperature range: -240 to +240 °C, for a short time +300 °C • Dielectric strength: 78.7 kV/mm wall thickness (approx. 2 kV/25 m) • Tensile strength: 305 MPa • Elongation at break: +50 % • Flexibility and wall stiffness: very good • Abrasion resistance: very good • Resistance to radiation: very good • Thermoplastic flow: >400 °C (no toxic decomposition products formed) • Inflammability: not inflammable (no toxic decomposition products formed) • Carbonization at: approx. +850 °C (no toxic decomposition products formed) • Copper-alu-silver-corrosion: none • Tolerance: inside Ø: ±5 % wall thickness: ±0.00635 mm ​

Item

PI Tubing THOMAFLUID®-PI Micro Capillary Tubing Application area

• Chemistry: For corrosive and aggressive media, for laboratory probes, for micro analysers and titrators, for fluid and gas flow transport in chemical-analytical and biomedical systems.

• Electronics and electrical engineering: Connection of microcables, insulation of microcables (coaxial cables), high-temperature insulation, micro coil forms, sheathing and plug-in channel for micro glass-fibre (laser) optics, micro sensors, precision micro slip rings.

• Computer, nuclear engineering: For use in systems with maximum packing density, for reduction of weight and for applications where radiation of high energy density (nuclear radiation, X-ray radiation) occurs.

• Precision mechanics: Micro bowden cable bushing, guide post for magnetic tape cassettes, heat protection, roller cover, micro pipes for fluids (e.g. ink).

Product specification

• Polyimide micro tubing is absolutely seamless and non-porous. It has smallest inside diameters and wall thicknesses, in the range of 0.080 to 1.151 mm and 0.013 to 0.051 mm respectively. Despite the extremely high wall stiffness the tubing can be bended springily to small radii.

• PI micro tubing is chemically resistant and is usually used in applications where fluoroplastic tubing (e.g. PTFE tubing) is preferred.

• Its chemical resistance combined with its mechanical, electrical, and thermal stability is outstanding.

• Its manufacturing tolerances are extremely low leading to an excellent dimensional stability.

• At overheating no toxic decomposition products are formed, as it is the case with fluoroplastics limiting there the number of applications. This problem does not occur with PI micro tubing.

60 THOMAFLUID® II - 2015

Wall thickness mm

Length

Unit

​

Inside Ø mm

Price

mm

piece

EURO

40946 40947 40948 40949 40950 40951 40952 40953 40954 40955 40956 40957 40958 40959 40960 40961 40962 40963 40964 40965 40966 40967 40968 40969 40970 40971 40972 40973 40974

0.102 0.102 0.114 0.114 0.127 0.127 0.14 0.14 0.16 0.16 0.18 0.18 0.203 0.203 0.226 0.226 0.254 0.254 0.287 0.287 0.32 0.32 0.36 0.36 0.404 0.404 0.455 0.455 0.51

0.013 0.013 0.013 0.013 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025

150 1,220 150 1,220 150 1,220 150 1,520 150 1,520 150 1,520 300 1,520 300 1,610 300 1,610 300 1,610 300 1,610 300 1,610 300 1,610 300 1,610 300

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

46.00 271.00 46.00 271.00 46.00 271.00 46.00 271.00 46.00 271.00 46.00 271.00 85.00 271.00 85.00 271.00 85.00 271.00 85.00 271.00 85.00 271.00 85.00 271.00 85.00 271.00 85.00 271.00 85.00

Tubing - PP Tubing Item

Tubing and Pipes made of Rigid Plastics Wall thickness mm

Length

Unit

​

Inside Ø mm

Price

Item

mm

40975 40976 40977 40978 40979 40980 40981 40982 40983 40984 40985 40986 40987 40988 40989

0.51 0.574 0.574 0.643 0.643 0.724 0.724 0.813 0.813 0.912 0.912 1.024 1.024 1.151 1.151

0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.051 0.051 0.051 0.051 0.051 0.051

1,610 300 1,610 300 1,610 300 1,610 300 1,610 300 1,610 300 1,610 300 1,610

piece

EURO

​

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

271.00 90.00 271.00 90.00 271.00 90.00 271.00 90.00 271.00 90.00 271.00 90.00 271.00 90.00 271.00

19062 19063 19064 19065 19066 19069 19070 19071 19072 19073 19074 19075 19076 19077 1

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

4.8 4.8 4.8 6.4 6.4 7.9 7.9 9.5 9.5 12.7 12.7 15.9 15.9 19

6.4 7.9 7.9 9.5 9.5 11.1 11.1 12.7 12.7 15.9 15.9 19 19 25.4

19 20 20 19 19 10.5 10.5 14 14 12 12 10 10 3

15 5 10 5 10 5 10 5 10 5 10 5 10 1

100.00 77.00 141.00 87.00 159.00 105.00 192.00 113.00 210.00 118.00 218.00 126.00 238.00 30.00

at +20 °C

THOMAFLUID®-High-Tech-PP Chemical Tubing calibrated

PP Tubing

Application area

• Process chemistry, Process technology, Water treatment, Heat exchangers, Protecting and insulating tubing

THOMAFLUID®-PP Chemical Tubing - Standard Product specification

• Very good dielectric properties • Good temperature resistance • Extremely good impact and notch impact strength • Thermoforming possible (e.g. for bending-off) • Good chemical resistance to oils, gasoline, and acids, at room temperature to most solvents. Unsuitable for permanent use with halogenated hydrocarbons

Technical specification

• Material: PP (polypropylene) • Colour: translucent • Shore hardness D: 80° • Temperature range: -40 to +120 °C, for a short time +145 °C • Regulations: FDA, USP XI • Flammability rating: UL 94 HB

Product specification

• Good chemical resistance • High temperature resistance • Resistance to hydrolysis • Very good dielectric properties • Higher hardness and stiffness as well as better recovery properties than PE • Lowest water absorption (slightly hygroscopic) • Physiological safety

Technical specification

• Material: PP (polypropylene) • Colour: natural • Shore hardness D: 72° (DIN 53505) • Temperature range: -25 to +90 °C, for a short time +120 °C • Density: 0.905 g/cm3 (DIN 53479) • Elongation at break: 600 % (ISO 527) • Tensile strength: 36 MPa (ISO 527) • Bending strength: 1450 MPa (ASTM D790) • Softening temperature: at 10 N (VST/A): +152 °C (ISO 306/A) at 50 N (VST/A): +87 °C (ISO 306/B) • Tolerances outside Ø: ±0.10 mm

​

​

Item ​ 19067 19068 19079 19080 19061

Inside Ø mm

Outside Ø mm

Max. op. pressure1 bar

Unit

Price

m

EURO

1.6 1.6 3.2 3.2 4.8

3.2 3.2 6.4 6.4 6.4

19 19 23 23 19

5 15 5 15 5

25.00 69.00 33.00 85.00 39.00

THOMAFLUID® II - 2015 61

Tubing - PP Tubing Item ​

mm

330085 330086 330087 330088 330089 330090 330091 330092 330093 330094 1

Inside Ø

2 2 4 4 6 6 8 8 10 10

Tubing and Pipes made of Rigid Plastics

Outside Max. op.

Min. Ø pressure1 bending radius mm bar mm 4 4 6 6 8 8 10 10 12 12

33 33 20 20 14 14 11 11 9 9

60 60 75 75 85 85 100 100 125 125

Unit

Price

Item

m

EURO

5 15 5 15 5 15 5 15 5 15

112.00 280.00 114.00 286.00 116.00 290.00 122.00 300.00 130.00 324.00

at +20 °C

THOMAFLUID®-PP Corrugated Tubing Application area

• Conveyance of liquid media up to +100 °C • Conveyance of heat-exchanger fluids • Used for protection of lines • In moving or vibrating systems or apparatuses • In construction of chemical equipment and plants

Product specification

• Low-weighted, very flexible corrugated tubing made of polypropylene (PP), transparent, black or ivory dyed. Flexible, mechanically highly loadable, good temperature stability and resistance to thermal aging, favourable electric properties. Good chemical resistance to alkalis, acids, anorganic salt solutions, fuels, mineral oils and fats.

• Unstable to aromatic and halogenated solvents and oxidants.

Technical specification

• Material: PP (polypropylene) • Temperature range: -40 to +100 °C (DIN 53446) • Density: 0.90 to 0.92 g/cm3 (DIN 53479) • Tearing strength: 20 - 45 N/mm2 (DIN 53455) • Elongation at break: >300 % (DIN 53455) • E-modulus: 700 - 1800 N/mm2 (DIN 53457) • Impact toughness: without break (DIN 53453) • Notch impact strength: 3 - 40 (DIN 53453) • Linear expansion coefficient: 1.7 - 1.8 x 10-4 x K-1 (DIN 52523) • Thermal conductivity: 0.22 - 0.26 W/mK (DIN 52612) • Track resistance: KA3c (DIN 53480) • Dielectric strength: 70 - 90 kV/mm (DIN 53481) • Flammability rating: UL 94 HB ​

Inside Ø

Outside Ø

Colour

Unit

mm

Min. bending radius mm

​

mm

43268 43269 43270 43277 43278 43279 43289 43290 43291 43292 43293 43294 43295 43296 43297 43298 43299 43300 43304 43305 43306 43307 43308 43309 43310 43311 43312 43313 43314 43315 43316 43317 43318

9.7 9.7 9.7 12.6 12.6 12.6 4.7 4.7 4.7 6.7 6.7 6.7 8.2 8.2 8.2 9.7 9.7 9.7 11.6 11.6 11.6 12.6 12.6 12.6 14.4 14.4 14.4 14.8 14.8 14.8 16.5 16.5 16.5

Price

​

m

EURO

12.8 12.8 12.8 18.9 18.9 18.9 7 7 7 9.9 9.9 9.9 11.4 11.4 11.4 12.8 12.8 12.8 15.7 15.7 15.7 18.9 18.9 18.9 18.4 18.4 18.4 18.8 18.8 18.8 20.9 20.9 20.9

20 20 20 25 25 25 10 10 10 16 16 16 20 20 20 20 20 20 25 25 25 25 25 25 30 30 30 30 30 30 35 35 35

nature nature nature nature nature nature black black black black black black black black black black black black black black black black black black black black black black black black black black black

5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15

29.00 47.00 65.00 42.00 73.00 99.00 24.00 42.00 58.00 27.00 45.00 63.00 27.00 45.00 63.00 29.00 47.00 65.00 40.00 70.00 95.00 42.00 73.00 99.00 44.00 78.00 106.00 47.00 81.00 111.00 55.00 94.00 129.00

PTFE Tubing THOMAFLUID®-PTFE Tubing Application area

• Analytical technology, biotechnology, medical engineering, microelectronics, process technology, chem. process engineering • For conveyance of acids, alkalis, salt solutions, also of strongly chloride-containing ones, and solvents, also halogenated ones. For use in the low-pressure part of HPLC systems, particularly in metal-free set-ups and for low-pressure liquid chromatography.

General product specification

• Conveying tubing • Very good chemical resistance • Very high temperature resistance • Very good coefficient of sliding friction • Antiadhesive surface • Very good dielectric properties • Highest gas-tightness

62 THOMAFLUID® II - 2015

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

• Low mechanical stability (without fillers) • Flexible, impact resistant, and resistant to aging • Free of extractable constituents, physiologically safe, and biocompatible.

• Polytetrafluoroethylene (PTFE) is a fluoroplast with excellent resistance to acids, alkalis, solvents and gases. Depending on the degree of mechanical and chemical loading the material is heat-resistant up to +260 °C. PTFE is not resistant to fluorine compounds and molten alkali metals at higher temperatures.

Item ​ 25320 25321 25322 25323 25324 25325 25326 25327 25328 25329 25330 25331 25332 25333 25334 25335 25336 25337 25338 25339 25340 25341 25342 25343 25344 25345

General technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: milky, weakly translucent • Temperature range: -200 to +260 °C, for a short time +280 °C • Tolerances inside Ø: 0 - 0.9 mm: ±0.07 mm, 1 - 2.9 mm: ±0.15 mm 3 - 5 mm: ±0.20 mm, 5 - 7 mm: ±0.25 mm, 7 - 10 mm: ±0.30 mm 15 - 20 mm: ±0.40 mm • Tolerances wall thickness: 0.1 - 0.3 mm: ±0.07 mm 0.3 - 0.6 mm: ±0.10 mm, 0.6 - 1.0 mm: ±0.15 mm, 1.0 - 2.0 mm: ±0.20 mm ​

THOMAFLUID®-PTFE Chemical Tubing Micro Thin-Walled ​

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

2.2 2.2 2.4 2.4 2.4 2.7 2.7 2.7 3.4 3.4 3.4 3.8 3.8 3.8 5.3 5.3 5.3 6.7 6.7 6.7 7.5 7.5 7.5 8.4 8.4 8.4

2.56 2.56 2.81 2.81 2.81 3.09 3.09 3.09 3.78 3.78 3.78 4.16 4.16 4.16 5.78 5.78 5.78 7.18 7.18 7.18 7.98 7.98 7.98 8.98 8.98 8.98

9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15

87.00 105.00 45.00 90.00 113.00 45.00 90.00 121.00 56.00 112.00 142.00 56.00 112.00 142.00 66.00 132.00 177.00 94.00 151.00 207.00 94.00 151.00 207.00 114.00 205.00 273.00

THOMAFLUID®-PTFE Chemical Tubing - Thin-Walled ​

Item ​ 25295 25296 25297 25298 25299 25300 25301 25302 25303 25304 25305 25306 25307 25308 25309 25310 25311 25312 25313 25314 25315 25316 25317 25318 25319

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

0.4 0.4 0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.7 0.7 0.7 0.9 0.9 0.9 1.07 1.07 1.07 1.5 1.5 1.5 1.7 1.7 1.7 2.2

0.68 0.68 0.68 0.76 0.76 0.76 0.86 0.86 0.86 1.01 1.01 1.01 1.16 1.16 1.16 1.37 1.37 1.37 1.8 1.8 1.8 2.08 2.08 2.08 2.56

3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3

17.00 34.00 44.00 17.00 35.00 45.00 17.00 37.00 47.00 18.00 39.00 51.00 25.00 50.00 64.00 26.00 51.00 66.00 33.00 66.00 85.00 35.00 69.00 89.00 44.00

Item ​ 25259 25260 25261 25262 25263 25264 25265 25266 25267 25268 25269 25270 25271 25272

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

0.3 0.3 0.3 0.6 0.6 0.6 0.7 0.7 0.7 0.9 0.9 0.9 1.1 1.1

0.76 0.76 0.76 1.06 1.06 1.06 1.19 1.19 1.19 1.46 1.46 1.46 1.67 1.67

3 9 15 3 9 15 3 9 15 3 9 15 3 9

22.00 56.00 78.00 22.00 56.00 78.00 22.00 56.00 78.00 22.00 56.00 78.00 28.00 72.00

THOMAFLUID® II - 2015 63

Tubing - PTFE Tubing Item ​ 25273 25274 25275 25276 25277 25278 25279 25280 25281 25282 25283 25284 25285 25286 25287 25288 25289 25290 25291 25292 25293 25294

Tubing and Pipes made of Rigid Plastics

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

1.1 1.5 1.5 1.5 2.2 2.2 2.2 2.7 2.7 2.7 3.4 3.4 3.4 5.3 5.3 5.3 6.7 6.7 6.7 7.5 7.5 7.5

1.67 2.1 2.1 2.1 2.76 2.76 2.76 3.3 3.3 3.3 4.28 4.28 4.28 6.06 6.06 6.06 7.58 7.58 7.58 8.37 8.37 8.37

15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15 3 9 15

100.00 31.00 79.00 109.00 38.00 96.00 134.00 42.00 108.00 150.00 60.00 156.00 216.00 72.00 173.00 245.00 91.00 209.00 291.00 102.00 224.00 303.00

THOMAFLUID®-PTFE Chemical Tubing ​

Item ​ 92520 92521 92522 92523 92524 92525 92526 92527 92528 92529 9319616 9319626 92530 92531 92532 92533 92534 92535

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

0.3 0.3 0.3 0.3 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.7 0.7 0.7 0.7

0.8 0.8 1.75 1.75 0.9 0.9 1.5 1.5 1 1 3 3 1.2 1.2 1.3 1.3 1.6 1.6

3 9 3 9 3 9 3 9 3 9 3 30 3 9 3 9 3 9

10.00 23.00 14.00 33.00 10.00 23.00 17.00 40.00 12.00 27.00 23.00 185.00 12.00 27.00 14.00 34.00 12.00 28.00

64 THOMAFLUID® II - 2015

Item ​ 92536 92537 41043 41044 92538 92539 92540 92541 92542 92543 92544 92545 92546 92547 92548 92549 92550 92551 300663 300664 92552 92553 92554 92555 92556 92557 92558 92559 92560 92561 92562 92563 92564 92565 92566 92567 92568 92569 92570 92571 92572 92573 92574 92575 92576 92577 92578 92579 92580 92581 92582 92583 92584 92585 83880 83881

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

0.7 0.7 0.76 0.76 0.9 0.9 0.9 0.9 1 1 1 1 1 1 1 1 1 1 1 1 1.1 1.1 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.5 1.5 1.5 1.9 1.9 2 2 2 2 2 2 2.2 2.2 2.4 2.4 2.4 2.4 2.5 2.5 2.5 2.5 2.5 2.5 2.7 2.7 3 3

2 2 2.4 2.4 1.5 1.5 1.7 1.7 1.5 1.5 1.6 1.6 1.8 1.8 2 2 3 3 5 5 1.9 1.9 2 2 2.2 2.2 2.3 2.3 2.5 2.5 3 3 2.8 2.8 3 3 4 4 5 5 3 3 3 3 3.2 3.2 3.5 3.5 4 4 4.5 4.5 3.5 3.5 3.8 3.8

3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 1 3

19.00 44.00 21.00 51.00 13.00 32.00 17.00 40.00 13.00 32.00 13.00 33.00 13.00 34.00 16.00 37.00 22.00 54.00 90.00 221.00 15.00 35.00 15.00 35.00 15.00 36.00 17.00 45.00 19.00 45.00 28.00 66.00 23.00 59.00 23.00 60.00 37.00 88.00 44.00 106.00 23.00 55.00 23.00 56.00 25.00 60.00 30.00 71.00 30.00 72.00 33.00 79.00 24.00 58.00 22.00 59.00

Tubing - PTFE Tubing Item ​ 83882 92588 92589 92590 92591 92592 92593 92594 92595 92596 92597 92598 92599 92600 92601 92602 92603 931911 931912 92604 92605 92606 92607 92608 92609 92612 92613 92614 92615 92616 92617 92618 92619 92620 92621 92622 92623 300522 300523 92624 92625 92626 92627 92628 92629 92630 92631 92632 92633 92634 92635 339646 339647 92636 92637 92638

Tubing and Pipes made of Rigid Plastics

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

3 3 3 3 3 3 3 3 3 3.4 3.4 3.5 3.5 3.5 3.5 3.8 3.8 3.8 3.8 4 4 4 4 4 4 4.8 4.8 5 5 5 5 5.5 5.5 6 6 6 6 6 6 6.5 6.5 6.6 6.6 6.8 6.8 7 7 7 7 7 7 7.5 7.5 7.5 7.5 8

3.8 4 4 4.5 4.5 5 5 6 6 4.4 4.4 5 5 5.5 5.5 4.5 4.5 4.8 4.8 5 5 5.5 5.5 6 6 5.8 5.8 6 6 7 7 7 7 7 7 8 8 10 10 7.5 7.5 8.6 8.6 7.8 7.8 8 8 8.5 8.5 9 9 8.5 8.5 9.5 9.5 9

5 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 30 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3

85.00 30.00 73.00 30.00 73.00 31.00 73.00 64.00 145.00 28.00 68.00 29.00 70.00 40.00 93.00 30.00 72.00 45.00 337.00 58.00 140.00 31.00 74.00 50.00 129.00 47.00 127.00 45.00 109.00 56.00 132.00 44.00 106.00 46.00 109.00 53.00 125.00 63.00 165.00 42.00 100.00 68.00 152.00 42.00 101.00 45.00 105.00 50.00 119.00 61.00 145.00 48.00 112.00 85.00 192.00 46.00

Item ​ 92639 92640 92641 92642 92643 92644 92645 92646 92647 92648 92649 92650 92651 92652 92653 92654 92655 92656 92657 92658 92659 92660 92661 92662 92663 92664 92665 92666 92667 92668 92669 92670 92671 92672 92673 25490 92674 92675 25493 25494 25495 25496 25497 25498 25499 92676 25501 92677 25502 25503 25505 25506 25507 25521

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

8 8 8 8 8 8 8 8 8 8.5 8.5 9 9 9 9 9.6 9.6 9.7 9.7 10 10 10 10 12 12 12 12 13 13 14 14 15 15 16 16 18 18 18 18 18 18 19 19 19 20 20 20 20 20 20 25 25 25 50

9 9.5 9.5 10 10 11 11 12 12 9.5 9.5 11 11 12 12 10.6 10.6 11.7 11.7 12 12 13 13 14 14 16 16 15 15 16 16 17 17 18 18 20 20 20 22 22 22 21 21 21 22 22 22 22 24 24 29 29 29 54

9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 1 3 9 1 3 5 1 3 5 1 3 5 9 1 3 1 3 5 3

111.00 54.00 125.00 75.00 171.00 120.00 263.00 144.00 316.00 64.00 147.00 80.00 175.00 137.00 301.00 68.00 150.00 87.00 192.00 87.00 192.00 136.00 300.00 110.00 241.00 164.00 361.00 117.00 255.00 142.00 298.00 147.00 306.00 153.00 337.00 68.00 160.00 332.00 78.00 186.00 270.00 90.00 112.00 168.00 87.00 169.00 218.00 350.00 87.00 248.00 104.00 296.00 429.00 521.00

THOMAFLUID® II - 2015 65

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-PTFE Chemical Tubing - colour-coded Technical specification

Item ​

Inside Ø mm

Outside Ø mm

Colour ​

Unit m

Price EURO

8 8 8 8 8 8

10 10 10 10 10 10

red red blue blue black black

5 10 5 10 5 10

150.00 228.00 150.00 228.00 150.00 228.00

14682 14683 14684 14685 14686 14687

• Material: PTFE (polytetrafluoroethylene) • Colour: yellow, green, red, blue, violet, orange, black • Temperature range: -200 to +250 °C, for a short time +280 °C ​

THOMAFLUID®-PTFE Capillary Tubing - imperial ​

Item ​ 14089 14090 14091 14092 14093 14094 14656 14657 14658 14659 14660 14661 14662 14663 14664 14665 14666 14667 10551 10552 10557 10558 10549 10550 10555 10556 14668 14669 14670 14671 14672 14673 14674 14675 14676 14677 14678 14679 14680 14681

Inside Ø mm

Outside Ø mm

Colour ​

Unit m

Price EURO

0.25 0.25 0.5 0.5 0.75 0.75 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 8 8 8 8

1.6 1.6 1.6 1.6 1.6 1.6 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 10 10 10 10

blue blue orange orange green green yellow yellow green green red red blue blue black black yellow yellow green green red red blue blue black black yellow yellow green green red red blue blue black black yellow yellow green green

3 9 3 9 3 9 5 10 5 10 5 10 5 10 5 10 5 10 3 9 3 9 3 9 3 9 5 10 5 10 5 10 5 10 5 10 5 10 5 10

35.00 95.00 35.00 95.00 35.00 95.00 74.00 118.00 74.00 118.00 74.00 118.00 74.00 118.00 74.00 118.00 99.00 172.00 59.00 155.00 59.00 155.00 59.00 155.00 59.00 155.00 106.00 166.00 106.00 166.00 106.00 166.00 106.00 166.00 106.00 166.00 150.00 228.00 150.00 228.00

66 THOMAFLUID® II - 2015

Item ​ 83386 83387 83388 83389 83390 83391 83871 83872 83873 83874 83875 83876 83877 83878 83879 83883 83884 83885 83886 83887 83888 14771 14772 14773

Inside Ø Inside Ø Outside Ø Outside Ø mm inch mm inch 0.25 0.25 0.25 0.5 0.5 0.5 0.75 0.75 0.75 1.6 1.6 1.6 2.4 2.4 2.4 3.2 3.2 3.2 4 4 4 4.4 4.4 4.4

​ ​ ​ ​ ​ ​ ​ ​ ​ 1/16“ 1/16“ 1/16“ 3/32“ 3/32“ 3/32“ 1/8“ 1/8“ 1/8“ 5/32“ 5/32“ 5/32“ 11/64“ 11/64“ 11/64“

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.2 3.2 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4

1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“

Unit m

Price EURO

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5

21.00 54.00 82.00 21.00 54.00 82.00 21.00 54.00 82.00 33.00 82.00 121.00 29.00 75.00 113.00 38.00 90.00 130.00 30.00 75.00 105.00 34.00 80.00 121.00

THOMAFLUID®-High-Tech-PTFE Analytical Tubing with Male Screw Connections Product specification

• Fitted with black female screws on both sides • Immediately usable • High chemical resistance • High pressure loadability • Very good temperature resistance • Highest gas tightness

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

Technical specification

• Material: Tubing: PTFE (polytetrafluoroethylene) Female screw: PP (polypropylene) Pressure disk: PA (polyamide) • Colour: milky • Temperature range: -50 to +120 °C • Max. operating pressure: 30 bar • Connection: female screws with external thread UNF 1/4“-28 Gg on both ends ​

Product specification

• A special fluoropolymer compound developed for prevention of electrostatics, polytetrafluoroethylene (PTFE), for semiconductor technology.

• The material is filled (alloyed) with 25 % powdered coal. The leakage resistance of the tubing is <106 Ohm/m.

• Good thermal loading capacity.

• The chemical resistance of the virgin PTFE is slightly reduced due to the modification of the tubing. Before conveying especially critical media, a preliminary test should be performed.

• The material is resistant to practically all organic and anorganic fluids and gases, PTFE reacts chemically inertly, but it is chemically less resistant to strongly oxidizing media.

• High resistance to aging.

• Very low friction coefficient.

• Smooth, antiadhesive inner surface.

• PTFE is physiologically safe and non-toxic.

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: black • Shore hardness D: 65° • Temperature range: -200 to +260 °C Item ​ 334240 334241 334242 334243 334244 334245 334246 334247 334248 334249 334250 334251 334252 334253 334254 334255 334256 334257 334258 334259

Inside Inside Outside Outside Length Unit Price Ø Ø Ø Ø mm inch mm inch mm piece EURO 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

1/32“ 1/32“ 1/32“ 1/32“ 1/32“ 1/32“ 1/32“ 1/32“ 1/32“ 1/32“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“

100 100 250 250 500 500 750 750 1,000 1,000 100 100 250 250 500 500 750 750 1,000 1,000

2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5

70.00 154.00 70.00 154.00 88.00 194.00 88.00 194.00 88.00 194.00 70.00 154.00 70.00 154.00 88.00 194.00 88.00 194.00 88.00 194.00

THOMAFLUID®-High-Tech-PTFE Antista Chemical Tubing ​

Item

I-Ø

​

mm

Min. bending radius1 mm mm

305011 305012 305013 305014 305015 305016 305019 305020 305685 305686 305687 305688 40606 40607 49780 49781 305017 305018 49782 49783 49784 49785 49786 49787 49788 49789 49790 49791 49792 49793 49794 49795

0.8 0.8 1.6 1.6 2 2 2 2 4 4 6 6 8 8 10 10 12 12 15 15 15 15 20 20 20 20 25 25 25 25 30 30

1.6 1.6 3.2 3.2 3 3 4 4 6 6 8 8 10 10 12 12 14 14 25 25 30 30 30 30 40 40 35 35 45 45 40 40

1

305011

at +23 °C

2

O-Ø

7 7 13 13 18 18 26 26 36 36 64 64 100 100 144 144 196 196 ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​

Design2

Unit Price

​

m

EURO

tubing tubing tubing tubing tubing tubing ​tubing ​tubing tubing tubing tubing tubing tubing tubing tubing tubing tubing tubing pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (ram extruded) pipe (pressed, sintered) pipe (pressed, sintered) pipe (ram extruded) pipe (ram extruded)

3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 1 2 1 2 1 2 1 2 1 2 1 2 1 2

66.00 162.00 110.00 242.00 132.00 324.00 151.00 336.00 180.00 352.00 264.00 512.00 290.00 516.00 340.00 612.00 450.00 846.00 123.00 200.00 202.00 333.00 202.00 333.00 338.00 542.00 202.00 333.00 338.00 542.00 220.00 364.00

maximum length of 49872 - 49795 is 1 meter

49782

THOMAFLUID® II - 2015 67

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-PTFE Corrugated Tubing with straight end pieces

Item

Application area

​

• Analytical technology, biotechnology, medical engineering, microelectronics, chemical process engineering, process technology

Inside Outside Ø Ø mm

mm

16719 38.5 16720 38.5

45.2 45.2

I. D. O. D. Min. Unit end end bending fitting fitting radius mm mm mm m 38 38

40 40

200 200

3 5

Price EURO 1,424.00 1,984.00

Product specification

• Conveying tubing • Very good chemical resistance • Very high temperature resistance • Very good coefficient of sliding friction • Antiadhesive surface • Very good dielectric properties • Highest gas-tightness (permeability) • Low mechanical stability (without fillers) • Polytetrafluoroethylene (PTFE) is a fluoroplast with excellent resistance to acids, alkalis, solvents and gases. Depending on the degree of mechanical and chemical loading the material is heat-resistant up to +260 °C. PTFE is not resistant to fluorine compounds and molten alkali metals at higher temperatures.

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: black • Temperature range: -70 to +260 °C, for a short time +280 °C • Design: fitted with smooth coupling ends (25 mm) on both sides ​

THOMAFLUID®-High-Tech-PTFE Corrugated Tubing Application area

• Microelectronics, pharmaceutical industry, semiconductor technology, food industry, chemical industry, biotechnology

Product specification

• A special fluoropolymer compound, polytetrafluoreethylene (PTFE), developed for the semiconductor industry.

• Resistant to practically all organic and anorganic fluids and gases.

PTFE is chemically inert and it is physiologically safe and non-toxic.

• Excellent bending radius and tearing strength even at low and extremely high temperatures.

• Outstanding thermal and dimensional stability.

• Large temperature range from -65 to +260 °C. • High resistance to aging.

• Very low coefficient of sliding friction.

• Smooth, antiadhesive inner surface • Outstanding dielectric properties ​

Item

Inside Outside Ø Ø

​

mm

mm

16685 16686 16687 16688 16689 16690 16694 16695 16696 16703 16704 16705 16706 16707 16708 16712 16713 16714 16718

5 5 5 7.5 7.5 7.5 9.8 9.8 9.8 16.3 16.3 16.3 19.5 19.5 19.5 26 26 26 38.5

8.2 8.2 8.2 10.5 10.5 10.5 13 13 13 19.6 19.6 19.6 23.6 23.6 23.6 31.3 31.3 31.3 45.2

I. D. O. D. Min. Unit end end bending fitting fitting radius mm mm mm m 5 5 5 7 7 7 9.5 9.5 9.5 16.3 16.3 16.3 18.5 18.5 18.5 26 26 26 38

68 THOMAFLUID® II - 2015

6 6 6 8 8 8 10.5 10.5 10.5 17.3 17.3 17.3 19.5 19.5 19.5 28 28 28 40

20 20 20 40 40 40 60 60 60 65 65 65 80 80 80 130 130 130 200

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1

Price

Item

EURO 90.00 213.00 292.00 113.00 289.00 399.00 126.00 318.00 491.00 225.00 581.00 806.00 238.00 596.00 816.00 292.00 709.00 875.00 594.00

Inside Ø

Outside Ø

Weight

Unit

mm

Min. bending radius mm

​

mm

40456 40585 40632 40633 40634 40635 40636 40637 40638 40639 40640 40641 40642 40643 40644 40645 40646 40647 40648

3 3 4.6 4.6 7 7 7.6 7.6 9.2 9.2 10.8 10.8 12.3 12.3 15.6 15.6 19 19 21.8

Price

g/m

m

EURO

5.5 5.5 8.1 8.1 10.6 10.6 11.4 11.4 13 13 14.6 14.6 16.2 16.2 19.5 19.5 23.5 23.5 27.5

16 16 19 19 32 32 35 35 38 38 45 45 51 51 64 64 76 76 83

15 15 30 30 44 44 46 46 54 54 66 66 78 78 115 115 145 145 185

1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1

46.00 121.00 57.00 147.00 69.00 180.00 76.00 197.00 83.00 208.00 90.00 224.00 97.00 238.00 116.00 278.00 139.00 332.00 163.00

Tubing - PTFE Tubing Item

Inside Ø

Outside Ø

​

mm

40649 40650 40651

21.8 24.5 24.5

Tubing and Pipes made of Rigid Plastics Weight

Unit

mm

Min. bending radius mm

Price

Item

g/m

27.5 31.2 31.2

83 89 89

185 225 225

m

EURO

​

3 1 3

354.00 179.00 394.00

351134 351135 351136 351137 351138 351139 351140 351141 351142 351143

THOMAFLUID®-High-Chem-PTFE Corrugated Chemical Hose - smooth jacket Application area

• Pharmaceutical technology, pharmaceutical production, food industry, petrochemical industry, process chemistry, chemical industry, basic materials industry

Product specification

• Universal chemical resistance • Exceptional flexibility due to helically wound PTFE liner • Extremely small bending radii • Steaming out (open system) admissable • Liner physiologically absolutely safe, non leaching, non discolouring • Jacket is electrically dissipative, abrasion-resistant and hardly inflammable.​ • For use in explosion-hazardous areas • With patented Ω-guide spirals • Seamlessly extruded • Very good antiadhesive properties • UV- and ozone-resistant

1

Inside Ø

Outside Ø

mm

mm

20 25 25 25 40 40 40 50 50 50

35 41 41 41 58 58 58 72 72 72

Min. For item1 bending radius mm ​ 40 60 60 60 80 80 80 100 100 100

351144 351145 351145 351145 351146 351146 351146 351147 351147 351147

Unit

Price

m

EURO

5 1 3 5 1 3 5 1 3 5

932.00 268.00 728.00 1,092.00 488.00 1,332.00 1,998.00 534.00 1,458.00 2,188.00

for fitting with matching external thread

RCT®-Accessories: Screw-In Hose Tail made of Stainless Steel for PTFE Corrugated Hoses Product specification

• Hose tail made of stainless steel (1.4571).

• The hose tail is screwed into the helically wound lining of the hose and then fixed with a clamp included in delivery.

• Prior to first use, hose assemblies must be pressure tested according to the standards (test pressure 24 bar, operating pressure up to 16 bar). ​

Technical specification

• Material: Liner: PTFE (polytetrafluoroethylene, DuPont62 virginal) Jacket: EPDM (ethylene-propylene-diene rubber), electrically conductive Insert: intermed. layer made of EPDM (ethylene-propylene-diene rubber), electrically conductive Reinforcements: high temp. resistant aramide braid • Colour of liner: transparent • Temperature range: -20 to +150 °C • Max. operating pressure: 16 bar at +20 °C • Bursting pressure: >64 bar at +20 °C • Vacuum: 0.9 bar at +20 °C • Volume resistivity: <109 Ohm (inside and outside) • Steaming out: max. 30 min. up to +180 °C • Regulations: liner conforming to FDA

Item ​ 351144 351145 351146 351147

​

External thread ​

For item ​

Unit piece

Price EURO

G 3/4“ G 1“ G 1 1/2“ G 2“

351132 - 351134 351135 - 351137 351138 - 351140 351141 - 351143

1 1 1 1

184.00 216.00 282.00 342.00

THOMAFLUID®-High-Tech-PTFE Antista Corrugated Tubing ​

Item ​ 351132 351133

Inside Ø

Outside Ø

mm

mm

20 20

35 35

Min. For item1 bending radius mm ​ 40 40

351144 351144

Unit

Price

m

EURO

1 3

228.00 620.00

THOMAFLUID® II - 2015 69

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

Product specification

• A special fluoropolymer compound developed for prevention of electrostatics, polytetrafluoroethylene (PTFE), for semiconductor technology.

• The material is filled (alloyed) with 25 % powdered coal. The leakage resistance of the tubing is <106 Ohm/m.

• Good thermal loading capacity.

• The chemical resistance of the virgin PTFE is slightly reduced due to the modification of the tubing. Before conveying especially critical media, a preliminary test should be performed.

• The material is resistant to practically all organic and anorganic fluids and gases, PTFE reacts chemically inertly, but it is chemically less resistant to strongly oxidizing media.

• High resistance to aging, very low friction coefficient.

• Smooth, antiadhesive inner surface.

• PTFE is physiologically safe and non-toxic.

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: black • Shore hardness D: 65° • Temperature range: -200 to +260 °C Item ​ 49454 49455 49456 49457 49458 49459

Inside Ø mm

Outside Ø mm

12.7 18.5 24.4 29.5 37 45

17.8 24.4 31.5 35.5 49.5 60.5

Min. bending Unit radius mm m 38 63 76 96 116 134

6 6 6 6 6 6

Price EURO 526.00 634.00 813.00 838.00 1,216.00 1,552.00

THOMAFLUID®-Fluorpolymer Antista Double-Wall Jacket Suction / Pressure Tubing Application area

• Chemical industry, mineral oil industry, process chemistry, basic material industry

Product specification

• The Inliner is a polymer of three fluorine synthetic components of which one is not fully consolidated • Very good chemical resistance.

• Antiadhesive properties facilitate the transport of viscous materials.

Therefore, the tubing is particularly suitable for the conveyance of pharmaceuticals and cosmetics.

• Tubing core is physiologically safe. It meets the requirements of the food law for conveyance of food and semi-luxuries.

• Liner does not contain any leachable constituents, the flow medium remains clear and undiscoloured.

• Jacket is smooth and hardly inflammable • Good abrasion resistance, good resistance to aging and weather.

• Very good dielectric properties

Technical specification

• Material: Liner: Fluorpolymer, smooth bore, non-electrically conducting Jacket: CR (chloroprene rubber) • Colour: liner white, jacket black • Temperature range: -30 to +100 °C, open steam cleaning up to 30 min. at max. +130 °C • Insert: two textile braids with tinned copper strands, from inside Ø 32 additionally with galvanised steel helix • Design: antistatic jacket • Leakage resistance: <106 Ohm ​

70 THOMAFLUID® II - 2015

83154 Item ​ 83154 83155 83156 83157 83158 83159 83160 83161 83162 83163 83164 83165 83166 83167 83168 83169 83170 83171 1

83163 Inside Outside Max. op. Vacuum1 Steel Ø Ø pressure1 coil mm mm bar mbar ​ 13 13 13 19 19 19 25 25 25 32 32 32 38 38 38 50 50 50

22 22 22 31 31 31 37 37 37 44 44 44 51 51 51 66 66 66

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

600 600 600 500 500 500 400 400 400 900 900 900 900 900 900 900 900 900

without without without without without without without without without with with with with with with with with with

Unit

Price

m

EURO

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5

198.00 370.00 468.00 248.00 460.00 542.00 258.00 482.00 574.00 272.00 518.00 646.00 280.00 578.00 684.00 324.00 656.00 816.00

at +20 °C

THOMAFLUID®-High-Chem-PTFE Suction and Pressure Hose Application area

• Chemical industry, process chemistry, pharmaceutical process engineering, petrochemistry

Product specification

• Highest chemical resistance except to chlorine trifluoride, oxygen difluoride and molten alkali metals. Limited resistance to chlorine and fluorine gas (max. +20 °C).

• Fitted with electrically dissipative, smooth, seamless fluoropolymer lining.

• Due to its OHM-conductivity the fluoropolymer hose may be used in EX-Zones 0 and 1 without problems.

• All commercially used cleaning and flushing liquids can be used.

• Open steaming out for cleaning and sterilisation is permissible up to +150 °C, max. 30 minutes.

• Liner is physiologically absolutely safe, it does not contain any extractable constituents.

• Jacket is electrically dissipative, abrasion-resistant and hardly inflammable.

• Resistant to weather and aging.

• Very good antistick properties, therefore low pressure drop.

• Non-leaching and non-discolouring, therefore suitable for the transfer of highly pure products.

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

Technical specification

• Material: Liner: PTFE (polytetrafluoroethylene), smooth, seamless, electrically dissipative Jacket: EPDM (ethylene-propylene-diene rubber), electrically dissipative Intermed. layer: hard rubber, electrically dissipative Insert: galvanised spring steel, from inside Ø 19 additionally with galvanised steel helix • Colour: black (liner and jacket) • Max. operating pressure: 16 bar at +23 °C • Test pressure: 25 bar at +23 °C • Temperature range: -30 to +150 °C, short-term steaming out max. 30 min.

• Conductivity: Ω/T-type according to DIN 12115:2011 • Leakage resistance: <106 Ohm between hose ends, <109 Ohm from lining to cover, through the hose wall • Regulations: meets TRbF 13/2 and DIN 12115:2011; FDA; USP Class VI

THOMAFLUID®-High-Tech-PTFE High-Pressure Tubing Product specification

• Suction and pressure tubing made of PTFE with braiding of stainless steel for highest pressures.

• Exception: High-pressure gases above 130 bar at simultaneously thermal and mechanical alternating load.

• The inner layer is produced conforming to FDA and suitable for food contact.

Technical specification

• Material: Liner: PTFE-copolymer (polytetrafluoroethylene) Jacket: stainless steel braiding (AISI 304/305) • Temperature range: -60 to +260 °C • Conductivity: The stainless steel braiding forms the electrically conductive connection between the fittings. ​

​

Item Item ​ 351031 351032 351033 351034 351035 351036 351037 351038 351039 351040 351041 351042 351043 351044 351045 351046 351047 351048 351049 351050 351051 1

I-Ø O-Ø

Max. Vacu- Min. Steel Unit op. um1 bending coil press.1 radius mm mm bar mbar mm ​ m 13 13 13 19 19 19 25 25 25 32 32 32 38 38 38 50 50 50 75 75 75

at +20 °C

23 23 23 31 31 31 37 37 37 44 44 44 51 51 51 66 66 66 91 91 91

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

600 600 600 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900

100 100 100 80 80 80 100 100 100 120 120 120 150 150 150 200 200 200 300 300 300

without without without with with with with with with with with with with with with with with with with with with

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5

Price ​ EURO 292.00 648.00 918.00 340.00 744.00 1,054.00 374.00 756.00 1,156.00 420.00 1,008.00 1,428.00 480.00 1,152.00 1,632.00 554.00 1,332.00 1,886.00 840.00 2,028.00 2,872.00

49600 49601 49602 49603 49604 49605 49606 49607 49608 49609 49610 49611 49612 49613 49614 49615 1

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO 5 5 6 6 8 8 10 10 12 12 16 16 19 19 25 25

8 8 9.5 9.5 11.4 11.4 13.3 13.3 17 17 20 20 23.1 23.1 30 30

265 265 250 250 200 200 165 165 135 135 100 100 70 70 60 60

800 800 750 750 600 600 500 500 400 400 300 300 210 210 180 180

50 50 60 60 100 100 125 125 150 150 200 200 250 250 300 300

1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3

90.00 213.00 92.00 223.00 95.00 228.00 116.00 277.00 162.00 387.00 218.00 525.00 241.00 578.00 300.00 578.00

at +20 °C

THOMAFLUID®-High-Tech-PTFE High-Pressure Tubing - Thick-Walled Product specification

• Pressure tubing (thick-walled) for highest pressures • With single stainless steel braiding • Antiadhesive inner surface • High temperature resistance • Highest chemical resistance to all kinds of anorganic and organic media

THOMAFLUID® II - 2015 71

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

Technical specification

Item

• Material: Liner: PTFE (polytetrafluoroethylene) Jacket: stainless steel braiding 1.4301 • Temperature range: -60 to +260 °C

​ 14977 14978 14979 14980 14981 14982 14983 14984 14985 14986 14987 14988 14989

​

Item ​

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO

14993 3.5 14994 3.5 14995 3.5 14996 5 14997 5 14998 5 1

6.5 6.5 6.5 8 8 8

300 300 300 280 280 280

900 900 900 800 800 800

25 25 25 50 50 50

3 5 10 3 5 10

113.00 172.00 312.00 121.00 185.00 335.00

at +20 °C

THOMAFLUID®-High-Tech-PTFE High-Pressure Tubing with Single Braiding Product specification

• Pressure tubing with single stainless steel braiding • Antiadhesive inner surface • High temperature resistance • Highest chemical resistance to all kinds of anorganic and organic media

1

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO 6.4 7.9 7.9 7.9 9.5 9.5 9.5 12.7 12.7 12.7 15.9 15.9 15.9

9 10 10 10 12 12 12 15.5 15.5 15.5 18.9 18.9 18.9

250 210 210 210 175 175 175 145 145 145 125 125 125

770 630 630 630 525 525 525 435 435 435 500 500 500

80 100 100 100 115 115 115 125 125 125 160 160 160

10 3 5 10 3 5 10 1 3 5 1 3 5

282.00 110.00 169.00 307.00 128.00 197.00 356.00 69.00 182.00 274.00 90.00 241.00 364.00

at +20 °C

THOMAFLUID®-High-Tech-PTFE High-Pressure Tubing with Twofold Braiding Product specification

• Pressure tubing with twofold (double) stainless steel braiding • Designed for increased pressure and bending strength • Antiadhesive inner surface • High temperature resistance • Highest chemical resistance to all kinds of anorganic and organic media

Technical specification

• Material: Liner: PTFE (polytetrafluoroethylene) Jacket: stainless steel braiding 1.4301 • Temperature range: -60 to +260 °C ​

Technical specification

• Material: Liner: PTFE (polytetrafluoroethylene) Jacket: stainless steel braiding 1.4301 • Temperature range: -60 to +250 °C • Water absorption: <0.1 % ​

Item ​

Item ​

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO

14975 6.4 14976 6.4

9 9

250 250

72 THOMAFLUID® II - 2015

770 770

80 80

3 100.00 5 156.00

14948 14949 14950 14951 14952 14953 14954 14955 14956 14957

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO 3.2 3.2 3.2 4.8 4.8 4.8 6.4 6.4 6.4 7.9

7.5 7.5 7.5 9 9 9 10 10 10 11.5

330 330 330 310 310 310 300 300 300 240

980 980 980 910 910 910 900 900 900 720

25 25 25 45 45 45 65 65 65 95

3 5 10 3 5 10 3 5 10 3

110.00 169.00 310.00 116.00 177.00 325.00 126.00 192.00 348.00 151.00

Tubing - PTFE Tubing Item ​ 14958 14959 14960 14961 14962 14963 14964 14965 14966 14967 14968 14969 14970 14971 14972 14973 14974 1

Tubing and Pipes made of Rigid Plastics

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO 7.9 7.9 9.5 9.5 9.5 12.7 12.7 12.7 15.9 15.9 15.9 19 19 19 25.4 25.4 25.4

11.5 11.5 13 13 13 17 17 17 20 20 20 23.5 23.5 23.5 30 30 30

240 240 200 200 200 180 180 180 160 160 160 105 105 105 85 85 85

720 720 600 600 600 540 540 540 480 480 480 325 325 325 255 255 255

95 95 100 100 100 115 115 115 135 135 135 170 170 170 280 280 280

5 10 3 5 10 1 3 5 1 3 5 1 3 5 1 3 5

228.00 417.00 179.00 271.00 499.00 92.00 254.00 384.00 113.00 310.00 471.00 144.00 392.00 596.00 182.00 496.00 755.00

THOMAFLUID®-PTFE High-Pressure Corrugated Tubing with Single Stainless Steel Braiding Product specification

• Highly flexible corrugated pressure tubing with single stainless steel sheath • Antiadhesive inner surface • High temperature resistance • Highest chemical resistance to all kinds of anorganic and organic media

Technical specification

• Material: Liner: PTFE (polytetrafluoroethylene) Jacket: stainless steel braiding 1.4301 • Temperature range: -60 to +260 °C ​

at +20 °C

THOMAFLUID®-High-Tech-PTFE High-Pressure Tubing for Gases

Item

Product specification

​

• Pressure tubing for gases with liner made of molecular-densified PTFE • Structure of the core affords highest gas-tightness • Pressure tubing fitted with stainless steel braiding • Antiadhesive inner surface • High temperature resistance • Highest chemical resistance to all kinds of anorganic and organic media

Technical specification

14921 14922 14923 14924 14925 14926 1

• Material: Liner: PTFE (polytetrafluoroethylene) Jacket: stainless steel braiding 1.4301 • Temperature range: -60 to +260 °C

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO 13 13 20 20 25 25

20 20 28 28 33 33

70 70 70 70 70 70

280 280 280 280 280 280

75 75 95 95 125 125

1 3 1 3 1 3

126.00 305.00 162.00 392.00 182.00 430.00

at +20 °C

THOMAFLUID®-High-Tech PTFE Shrinkable Tubing

​

Application area

• Insulation of electrical components, ideal corrosion protection, excellently suitable for jacketing of movable and mechanical components, insulation of heating conductor connections and resistors

General product specification

• Good dielectric strength • Unmeltable and self-extinguishing • Highest chemical resistance, highest abrasion resistance • Thin-walled and semi-rigid • High temperatures Item ​

Inside Outside Max. op. Bursting Min. Unit Price Ø Ø pressure1 pressure1 bending radius mm mm bar bar mm m EURO

14933 3.2 14934 3.2 14935 3.2 1

at +20 °C

6.5 6.5 6.5

300 300 300

900 900 900

25 25 25

3 151.00 5 228.00 10 415.00

General technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: transparent, smooth • Temperature range: -65 to +260 °C • Shrinkage temperature: +350 to +500 °C • Storage temperature: max. +50 °C • Longitudinal shrinkage: max. 10 % • Dielectric strength: 25 kV/mm min.

• Dielectric constant: max. 2.2 • Volume Resistivity: 1018 Ohm x cm min.

• Production standard: according to MIL-I-23053 / 12 A, Class 5 produced according to EMS-3584 ​

THOMAFLUID® II - 2015 73

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-High-Tech-PTFE Shrinkable Tubing 4:1 - bulk stock ​

THOMAFLUID®-High-Tech-PTFE Shrinkable Tubing 2:1 - short length ​

Item ​

Item ​ 166341 166351 166361 166371 166381 16639 16640 16641 16642 16643 16644 16645 16646 16647 16648 16649 16650 16651 16652 16653 16654 16655 16656 16657 16658 16659 16660 16661 16662 16663 16664 16665 16666 16667 16668 16669 16670 16671 16672 16673 16674 16675

Ø before shrinkage mm

Ø after shrinkage mm

Unit m

Price EURO

1.98 1.98 1.98 3.17 3.17 3.17 4.76 4.76 4.76 6.35 6.35 6.35 7.94 7.94 7.94 9.52 9.52 9.52 11.11 11.11 11.11 12.7 12.7 12.7 14.29 14.29 14.29 15.87 15.87 15.87 17.46 17.46 17.46 19.05 19.05 19.05 22.22 22.22 22.22 25.4 25.4 25.4

0.64 0.64 0.64 0.94 0.94 0.94 1.27 1.27 1.27 1.6 1.6 1.6 2 2 2 2.44 2.44 2.44 2.85 2.85 2.85 3.66 3.66 3.66 3.94 3.94 3.94 4.52 4.52 4.52 5.03 5.03 5.03 5.7 5.7 5.7 6.2 6.2 6.2 7.06 7.06 7.06

1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10 1 5 10

27.00 118.00 203.00 29.00 124.00 211.00 30.00 127.00 218.00 31.00 130.00 223.00 38.00 158.00 270.00 40.00 172.00 296.00 44.00 183.00 313.00 45.00 186.00 316.00 48.00 206.00 350.00 51.00 219.00 375.00 56.00 242.00 412.00 63.00 262.00 454.00 66.00 279.00 475.00 69.00 290.00 498.00

74 THOMAFLUID® II - 2015

940531 940541 940551 940561 940581 940591 940611 940621 940631

Ø before shrinkage mm

Ø after shrinkage mm

Unit m

Price EURO

1.3 1.3 2.8 2.8 3.5 3.5 6.8 7.7 9.4

0.7 0.8 1.7 1.7 2 2.2 4 4.5 5.7

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

19.00 21.00 23.00 32.00 28.00 39.00 62.00 88.00 95.00

THOMAFLUID®-PTFE/FEP Dual-Shrink-Tubing Application area

• Heat shrink tubing offering a tight, moisture-resistant, wear-proof encapsulation.

Product specification

• Dual-Shrink tubing of fluoropolymer PTFE/FEP is constructed with an exterior of heat shrink PTFE and an inner layer of FEP. Outer tubing of PTFE shrinks for tight fit when heat is applied. Inner layer of FEP melts and flows to encapsulate parts. It is easy to apply, and is designed to provide a tight, moisture-proof bond over wires, cables, connectors, splices, terminals, etc.

• The PTFE shrinks tightly over inserted parts when the covered section is heated, while the FEP melts and flows into a solid or nearsolid encapsulation with a fit so tight that it can withstand the most severe stresses involving pull or vibration. Dual-Shrink tubing provides all the outstanding electrical, chemical, and mechanical properties of PTFE including a service temperature up to +232 °C ​

Item ​ 940501 940511 940521 940522 940523 940524 940525 940526 940527

Ø before shrinkage mm

Ø after shrinkage mm

Unit m

Price EURO

0.91 1.52 4.06 4.83 6.35 8.89 11.43 17.78 24.13

0 0 0 1.57 3.18 4.83 7.92 11.18 16

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

43.00 73.00 102.00 120.00 181.00 205.00 297.00 372.00 459.00

Tubing - PTFE Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-High-Tech-PTFE Shrinkable Tubing Kit Application area

• Insulation of electrical components, ideal corrosion protection, excellently suitable for jacketing of movable and mechanical components, insulation of heating conductor connections and resistors

Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, translucent • Temperature range: -40 to +150 °C, for a short time +165 °C ​

Product specification

• Good dielectric strength • Unmeltable and self-extinguishing • Highest chemical resistance, highest abrasion resistance • Thin-walled and semi-rigid • Two lengths à 0.6 m each of the sizes: 1.96 mm; 3.16 mm; 6.35 mm; 9.52 mm; 12.70 mm at a wall thickness of approx. 0.8 mm before shrinkage

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: transparent • Temperature range: -65 to +260 °C • Shrinking rate: 4:1 • Shrinkage temperature: +350 to +500 °C • Storage temperature: max. +50 °C • Longitudinal shrinkage: max. 15% • Dielectric strength: 25 kV/mm min.

• Dielectric constant: max. 2.2 • Volume Resistivity: 1018 Ohm x cm min.

• Kit specification: Two lengths à 0.6 m each of the sizes

Item ​ 92479 92480 92481 92483 92484 92485 92487 92488 92489 92491 92492 92493 92495 92496 92497 92499 925001 92503 925041 92507 925081

​

Item ​ 10274

Unit piece

Price EURO

1

125.00

1

Inside Ø mm

Outside Ø mm

Design ​

Unit m

Price EURO

2 2 2 4 4 4 6 6 6 8 8 8 10 10 10 13 13 16 16 20 20

4 4 4 6 6 6 8 8 8 10 10 10 12 12 12 16 16 20 20 25 25

flexible flexible flexible flexible flexible flexible flexible flexible flexible flexible flexible flexible flexible flexible flexible rigid rigid rigid rigid rigid rigid

1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 1 3 1 3 1 3

19.00 47.00 111.00 27.00 64.00 160.00 35.00 83.00 187.00 46.00 102.00 208.00 58.00 115.00 230.00 56.00 133.00 86.00 206.00 107.00 239.00

will be delivered in 3 sections of 1 m

THOMAFLUID®-High-Chem-PVDF Spiral Tubing

PVDF Tubing THOMAFLUID®-PVDF Chemical Tubing Application area

• Chemical industry, process chemistry, pharmaceutical industry, food industry

Product specification

• High mechanical stability • Good dimensional stability due to strong hardness • Excellent chemical resistance, outstanding resistance to aging • High dielectric constant • Non-toxic • Resistant to UV and gamma radiation • Not resistant to fuming sulfuric acid, hot concentrated alkalis, alkali metals, dimethyl formamide, dimethyl sulfoxide, dimethyl acetamide and some strongly basic amines.

Product specification

• Resistance to UV and radioactive radiation • Ideal for cleanroom applications • Good mechanical stability, high dielectric constant • Good dimensional stability due to strong hardness • Thermoplasticly processed • High resistance to aging, good abrasion resistance • Resistant to oxidizing agents, acids, alcohols, aliphates, weak alkalis, chlorides and halogens. Not resistant to fuming sulfuric acid, hot concentrated alkalis, alkali metals, dimethyl formamide, dimethyl sulfoxide, dimethyl acetamide and some strongly basic amines.

Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: milky • Temperature range: -40 to +120 °C • Regulations: USP Class VI; FDA; BfR 3-A Hygiene Regulations for the dairy machinery • Flammability rating: UL 94 V-0 ​

THOMAFLUID® II - 2015 75

Tubing - PVDF Tubing

Item ​

Inside Outside Ø Ø mm mm

338711 338712 338713 338714 1

4 4 6 6

Tubing and Pipes made of Rigid Plastics

I-Ø spiral mm

6 6 8 8

40 40 50 50

Max. op. Working Price pressure1 length bar m EURO 18 18 12 12

2.5 6 2.5 6

74.00 120.00 92.00 156.00

Item Nominal Inside Outside Min. Colour Unit Price width Ø Ø bending radius ​ mm mm mm mm ​ m EURO 43388 43389 43400 43401 43402 43403 43404 43421 43422 43423 43436

at +20 °C

THOMAFLUID®-High-Tech-PVDF Corrugated Tubing Application area

• Protection of lines at stationary installation and building, particularly under unfavourable environmental conditions in the areas of machine engineering, chemical apparatus construction, electronics.

• Conveyance of aggressive as well as sensitive liquid and gaseous media at mobile and vibrating apparatuses and equipments in the areas of environmental research, environmental analytics, semiconductor production, chemical process automatization, biotechnology, nuclear technology and radiochemistry.

Product specification

• Temperature resistant corrugated tubing made of flame-resistant, highly stable fluorocarbon material polyvinylidene fluoride (PVDF), transparent, black or brown coloured. Flexible, mechanically strongly loadable, particularly high abrasion resistance and impact toughness even at low temperatures, favourable electric properties; biocompatible, sterilizable at +121 °C. Highest chemical resistance to nearly all aggressive media such as halogens, ozone, strong acids and alkalis, solvents, and aromatic hydrocarbons; limited use with aliphatic solvents such as acetone and ethyl acetate, unstable to fuming sulfuric acid, acetic anhydride, and amines.

Technical specification

• Material: PVDF (polyvinylidene fluoride) • Temperature range: -40 to +140 °C (DIN 53446) • Density: 1.78 to 2.00 g/cm3 (DIN 53479) • Tearing strength: 40 - 60 N/mm2 (DIN 53455) • Elongation at break: 20 - 30 % (DIN 53455) • E-modulus: 1800 - 3300 N/mm2 (DIN 53457) • Impact toughness: without break (DIN 53453) • Notch impact strength: 10 until without break (DIN 53453) • Linear expansion coefficient: 0.8 - 1.4 x 10-4 x K-1 (DIN 52523) • Thermal conductivity: 0.12 - 0.19 W/mK (DIN 52612) • Track resistance: KA1 (DIN 53480) • Dielectric strength: 60 - 100 kV/mm (DIN 53481) • Sterilization: autoclavable (+121 °C); in gas (ethylene oxide); in hot air (+160 °C) ​

76 THOMAFLUID® II - 2015

8.5 8.5 13 13 13 14 14 11 11 11 17

8.3 8.3 12.3 12.3 12.3 13.9 13.9 10.4 10.4 10.4 16.2

11.3 11.3 15.6 15.6 15.6 18.3 18.3 13.4 13.4 13.4 20.7

32 32 45 45 45 50 50 40 40 40 55

nature nature nature nature nature nature nature black black black black

1 5 1 5 10 1 5 1 5 10 1

38.00 120.00 43.00 140.00 181.00 53.00 152.00 42.00 132.00 170.00 68.00

THOMAFLUID®-High-Tech PVDF Shrinkable Tubing – Semirigid Application area

• Insulation of heating element connections • Protection and tension-relief of high-temperature resistant components • Protection of soldered and crimp connections • Protection from chemical impacts, e.g. electro-plating bathes.

General product specification • High dielectric strength • Unmeltable and self-extinguishing • UL / CSA and VG-approved • High chemical resistance • Highest abrasion resistance

General technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural-transparent • Temperature range: -55 to +175 °C • Shrinking rate: 2:1 • Shrinkage temperature: +175 °C • Storage temperature: max.+50 °C • Radial shrinkage: 50 % • Longitudinal shrinkage: max. 10 % • Tensile strength: >34.6 MPa • Elongation at break: >150 % • Dielectric strength: 25 kV/mm min.

• Dielectric constant: max. 5.5 • Volume Resistivity: 1013 Ohm x cm min.

​

Tubing - PVDF Tubing

Tubing and Pipes made of Rigid Plastics

THOMAFLUID®-High-Tech-PVDF Shrinkable Tubing Semirigid

Item ​

Ø before shrinkage mm

Ø after shrinkage mm

1.2 1.2 1.6 1.6 2.4 2.4 3.2 3.2 4.8 4.8 6.4 6.4 9.5 9.5 12.7 12.7 19.1 19.1 25.4 25.4

0.6 0.6 0.8 0.8 1.2 1.2 1.6 1.6 2.4 2.4 3.2 3.2 4.8 4.8 6.4 6.4 9.5 9.5 12.7 12.7

Unit m

Price EURO

​

14105, 10275 Item ​ 14105 14106 14107 14108 14109 14110 14111 14112 14113 14114

302945 302946 302947 302948 302949 302950 302951 302952 302953 302954 302955 302956 302957 302958 302959 302960 302961 302962 302963 302964

14105, 10275

Ø before shrinkage mm

Ø after shrinkage mm

Length

Unit

Price

m

piece

EURO

6.4 6.4 9.5 9.5 12.7 12.7 19 19 25.4 25.4

3.2 3.2 4.8 4.8 6.4 6.4 9.5 9.5 12.7 12.7

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

1 5 1 5 1 5 1 5 1 5

40.00 155.00 47.00 190.00 63.00 210.00 91.00 360.00 228.00 513.00

THOMAFLUID®-High-Tech-PVDF Shrinkable Tubing flexible Application area

THOMAFLUID®-High-Tech-PVDF Shrinkable Tubing Kit Semirigid Product specification

• Two lengths à 0.6 m each of the sizes: 1.2 mm; 1.6 mm; 2.4 mm; 4.8 mm; 6.4 mm and 9.5 mm at a wall thickness of approx. 0.13 mm before shrinkage. ​

Item ​

• Electrical insulation • As anti-bend protection and strain relief • As protection from environmental influences

10275

Technical specification

• Material: PVDF (polyvinylidene fluoride), self-extinguishing, thin, flexible • Colour: nature-transparent • Temperature range: -55 to +175 °C • Shrinking rate: 2:1 • Shrinkage temperature: +150 °C • Longitudinal shrinkage: max. 10 % • Tensile strength: min. 24.3 MPa • Elongation at break: min. 300 % • Dielectric strength: 15.7 kV/mm • Volume Resistivity: 1013 Ohm x cm min. ​

5 62.00 15 158.00 5 64.00 15 163.00 5 68.00 15 173.00 5 72.00 15 183.00 5 88.00 15 224.00 5 110.00 15 280.00 5 122.00 15 311.00 5 144.00 15 367.00 5 184.00 15 469.00 5 419.00 15 1,005.00

Unit piece

Price EURO

1

215.00

Tubing, Pipes, Capillarys made of Metals Stainless Steel Tubing THOMAFLUID®-Annularly Corrugated Hoses General product specification

• Corrugated hoses are thin-walled, cylindrical components with a corrugated structure in their surface area. Annularly corrugated hoses are technically superior to helically corrugated hoses. Their profile direction perpendicular to the hose axis enables an undisturbed interface of the connection fittings and thereby increases the process stability during assembly and in service. In addition, annularly corrugated hoses do not produce torsion loads with increased pressure or pressure shocks. Thus, today annularly corrugated hoses are generally preferred.

• Through their corrugated structure, metal hoses are flexible and pressure resistant. They are leakproof, temperature and corrosion resistant as well as torsionally rigid and are used in the following applications: for transport of liquids and gases under pressure, as vacuum pipe, as economic, flexible connection for absorbing movements, heat expansion and/or vibrations plus as filling hose.

• When configured correctly, the metal hoses are robust and nearly maintenance-free components with a high degree of operational safety and a long service life. ​

THOMAFLUID® II - 2015 77

Tubing - Stainless Steel Tubing

Tubing, Pipes and Capillarys made of Metals

THOMAFLUID®-High-Tech-Stainless Steel Pressure Tubing with Threaded Joints Product specification

Item ​

Nominal width mm

Internal thread ​

External thread ​

Length mm

EURO

20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 32 32 32 32 32 40 40 40 40

R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1 1/4“ R 1 1/4“ R 1 1/4“ R 1 1/4“ R 1 1/4“ R 1 1/2“ R 1 1/2“ R 1 1/2“ R 1 1/2“

R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 3/4“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1“ R 1 1/4“ R 1 1/4“ R 1 1/4“ R 1 1/4“ R 1 1/4“ R 1 1/2“ R 1 1/2“ R 1 1/2“ R 1 1/2“

300 500 600 700 800 1,000 1,500 2,000 300 500 600 700 800 1,000 1,500 2,000 500 700 800 1,000 1,500 500 800 1,000 1,500

141.00 162.00 172.00 182.00 187.00 220.00 228.00 277.00 167.00 192.00 197.00 202.00 208.00 213.00 238.00 284.00 192.00 215.00 228.00 233.00 284.00 218.00 287.00 315.00 366.00

13988 13989 13990 13991 13992 13993 13994 13995 13996 13997 13970 13971 13972 13973 13974 13975 13976 13977 13978 13979 13980 13981 13982 13998 13999

• Ring corrugated tubing made of stainless steel 1.4404 with single stainless steel wire braiding 1.4301 and end sleeves on both sides.

• At one side malleable iron hexagon nipple with external thread (hardsoldered) made of stainless steel 1.4571, conical.

• At the other side malleable iron screwed fitting with internal thread (hard-soldered) made of stainless steel 1.4571, both fittings with Whitworth pipe thread DIN 2999 (ISO 7/1) eachend sleeve made of stainless steel 1.4301 on both sides.

Technical specification

• Material: stainless steel 1.4404 • Temperature range: -10 to +300 °C • Max. operating pressure: 25 bar at +20 °C • Regulations: DIN-DVGW certificate, permissible operating pressure max. 4 bar, on request ​

Price

THOMAFLUID®-High-Tech-Stainless Steel Pressure Tubing with Straight End Pieces Product specification

• Ring corrugated tubing made of stainless steel 1.4541 with single stainless steel wire braiding 1.4301.

• On both ends welded pipe end pieces of stainless steel, for bite-type fitting joints DIN 3861.

Item ​ 13958 13959 13960 13961 13962 13963 13964 13965 13966 13967 13968 13969 13983 13984 13985 13986 13987

Nominal width mm

Internal thread ​

External thread ​

Length

Price

mm

EURO

8 8 8 10 10 10 10 10 12 12 12 12 12 12 12 12 12

R 1/4“ R 1/4“ R 1/4“ R 3/8“ R 3/8“ R 3/8“ R 3/8“ R 3/8“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“

R 1/4“ R 1/4“ R 1/4“ R 3/8“ R 3/8“ R 3/8“ R 3/8“ R 3/8“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“ R 1/2“

500 750 1,000 300 500 750 1,000 1,500 300 400 500 600 700 800 1,000 1,500 2,000

110.00 131.00 151.00 100.00 116.00 136.00 156.00 182.00 105.00 113.00 121.00 131.00 141.00 151.00 167.00 174.00 213.00

78 THOMAFLUID® II - 2015

Technical specification

• Material: stainless steel 1.4541 • Temperature range: -10 to +550 °C ​

Item ​ 340687 340688 340689 14000

Nominal Max. op. d s a l Length Price width press.1 mm bar mm mm mm mm mm EURO 4 4 4 8

76 76 76 76

6 6 6 10

1 1 1 1.5

30 30 30 30

40 40 40 40

300 500 1,000 300

126.00 140.00 178.00 116.00

Tubing - Stainless Steel Tubing Item ​

Nominal Max. op. d s a l Length Price width press.1 mm bar mm mm mm mm mm EURO

14001 14002 14003 14004 14005 14006 14007 14008 14009 14010 14011 14012 14013 1

Tubing, Pipes and Capillarys made of Metals

8 8 10 10 10 12 12 12 16 20 20 25 25

76 76 31 31 31 85 85 85 98 57 57 65 65

10 10 12 12 12 15 15 15 18 22 22 28 28

1.5 1.5 1.5 1.5 1.5 2 2 2 1.5 2 2 2 2

30 30 30 30 30 32 32 32 32 36 36 40 40

40 40 40 40 40 44 44 44 46 52 52 58 58

500 1,000 300 500 1,000 300 500 1,000 1,000 500 1,000 500 1,000

133.00 172.00 123.00 141.00 182.00 136.00 156.00 200.00 223.00 167.00 220.00 182.00 238.00

THOMAFLUID®-High-Tech-Stainless Steel Pressure Tubing Product specification

• Ring corrugated tubing made of stainless steel 1.4541 with single stainless steel wire braiding 1.4301 • Supplied as piece goods without end pieces, for mounting of detachable screwed fittings.

Technical specification

• Material: stainless steel 1.4541 • Temperature range: -10 to +500 °C ​

at +20 °C

THOMAFLUID®-High-Tech-Stainless Steel Vacuum Tubing - with Small Flange Product specification

Item

Technical specification

​

• Ring corrugated tubing made of stainless steel 1.4541, welded • On both sides stainless steel small flange according to DIN 28403.

• Material: stainless steel 1.4541 • Temperature range: -10 to +550 °C • Leak testing: with helium leak testing, inleakage rate <10-9 mbar I/s (vacuum method), with test certificate 3.1 B according to EN 10204 (DIN 50049), ultrasonic cleaned, ends closed with plastic caps ​

Item ​ 14014 14015 14016 14017 14018 14019 14020 14021 14022 14023 14024 14025

Nominal width mm

d

d1

d2

Length

Price

mm

mm

mm

mm

EURO

16 16 16 16 25 25 25 25 40 40 40 40

17.2 17.2 17.2 17.2 26.2 26.2 26.2 26.2 41.2 41.2 41.2 41.2

30 30 30 30 40 40 40 40 55 55 55 55

22.7 22.7 22.7 22.7 32.2 32.2 32.2 32.2 49.7 49.7 49.7 49.7

250 500 750 1,000 250 500 750 1,000 250 500 750 1,000

179.00 192.00 207.00 220.00 197.00 207.00 223.00 235.00 236.00 251.00 279.00 299.00

Nominal width

d

D1

mm

mm

mm

6 6 8 8 10 10 12 12 16 16 20 20 25 25 32 32 40 40 50

6.2 6.2 8.3 8.3 10.2 10.2 12.2 12.2 16.2 16.2 20.2 20.2 25.5 25.5 34.2 34.2 40.1 40.1 50.4

10.8 10.8 13.7 13.7 15.7 15.7 18.2 18.2 23.3 23.3 28.3 28.3 34.2 34.2 43 43 52 52 62.6

14026 14027 14028 14029 14030 14031 14032 14033 14034 14035 14036 14037 14038 14039 14040 14041 14042 14043 14044 1

Min. Max. op. Unit Price bending pressure1 radius mm bar m EURO 80 80 120 120 130 130 140 140 160 160 170 170 190 190 260 260 300 300 320

150 150 100 100 100 100 65 65 65 65 40 40 50 50 25 25 40 40 25

1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1

80.00 202.00 85.00 213.00 90.00 218.00 92.00 236.00 105.00 269.00 110.00 282.00 123.00 307.00 141.00 358.00 185.00 466.00 197.00

at +20 °C

THOMAFLUID®-Metal Protecting Pipe

THOMAFLUID® II - 2015 79

Tubing - Stainless Steel Tubing

Tubing, Pipes and Capillarys made of Metals

Application area

• Flexible metal pipe for accommodation of tubing, cables or feeders to protect them from welding sparks (welding spatter), splash-water or spatter. ​

Item ​

For tubing outside Ø mm

Unit m

Price EURO

0-6 0-6 0-8 0-8 0 - 12 0 - 12 0 - 19 0 - 19

5 10 5 10 5 10 3 5

116.00 197.00 136.00 228.00 167.00 279.00 116.00 167.00

14593 14594 14595 14596 14597 14598 14599 14600

Item ​ 14045 14046 14047 14048 14049 14050 14051 14052 14053 14054

THOMAFLUID®-Screw-in Joint made of Brass Product specification

• Accessories for: THOMAFLUID® High-Tech Stainless Steel Pressure Tubing • Material: brass • Detachable screwed fitting, flat-sealing, to be mounted without soldering.

• Thread type: Withworth external thread, conical, according to DIN 2999 (ISO 7/1)

​

d mm

Internal thread ​

6 8 10 12 16 20 25 32 40 50

R 1/4“ R 1/4“ R 3/8“ R 1/2“ R 1/2“ R 3/4“ R 1“ R 1 1/4“ R 1 1/2“ R 2“

l mm

WAF (SW) mm

Unit

Price

piece

EURO

31 34 37 42 45 46 50 52 64 70

24 27 30 32 41 46 55 65 75 90

2 2 2 2 2 2 1 1 1 1

39.00 40.00 44.00 46.00 69.00 75.00 41.00 59.00 110.00 136.00

Titanium and Stainless Steel Capillaries THOMACHROM®-Capillary made of Titanium Product specification

Item ​ 14055 14056 14057 14058 14059 14060 14061 14062

Nominal External width thread mm ​ 6 8 10 12 16 20 25 32

R 1/4“ R 1/4“ R 3/8“ R 1/2“ R 1/2“ R 3/4“ R 1“ R 1 1/4“

l mm

WAF (SW) mm

Unit

Price

piece

EURO

41 43 47 55 59 62 68 71

24 27 30 32 41 46 55 65

2 2 2 2 2 2 1 1

39.00 40.00 44.00 46.00 69.00 75.00 41.00 59.00

• High-pressure resistant capillary material for metal-free HPLC of sensitive and bioactive substances and for ion chromatography.

• HPLC capillary made of extrapure titanium, a material combining highest chemical resistance with biocompatibility, suitable for all HPLC eluents, even for strongly salt-containing and strongly acid eluents.

• Extrapure titanium capillaries can be cut to size without problems with the THOMACHROM® metal capillary cutter, item 83384. ​

THOMAFLUID®-Screw-on Joint made of Brass Product specification

• Accessory for: THOMAFLUID® High-Tech Stainless Steel Pressure Tubing • Material: brass up to DN 32, malleable iron from DN 40 onwards • Detachable screwed fitting, flat-sealing, to be mounted without soldering • Thread type: Withworth internal thread, cylindrical, according to DIN 2999 (ISO 7/1). ​

80 THOMAFLUID® II - 2015

Item

Inside Ø

Outside Ø

​

mm

inch

Wall thickness mm

84035 84038 84041 84044

0.3 0.5 0.8 2

1/16“ 1/16“ 1/16“ 1/8“

0.64 0.54 0.39 0.54

Unit

Price

m

EURO

1 1 1 1

422.00 422.00 422.00 422.00

Tubing - Titanium and Stainless Steel Capillaries

Tubing, Pipes and Capillarys made of Metals

THOMACHROM®-Stainless Steel Capillary Glass-Coated

Item ​ 83393 975281 975282 975291 975292 975293 975301 975302 975311 975312 975313 83395 83396 975341 975342 975351 975352 975361 975362

Product specification

• Stainless steel capillary with borosilicate glass as inliner. Unmatched corrosion resistance and biocompatibility, for conveyance of ultrapure or aggressive media and for use as column for microbore and standard HPLC of sensitive and bioactive substances.

• Excellent resistance to strong acids and alkalis • Max. temperature for continuous use up to +500 °C, can be electrically heated by applying a low voltage across the metal casing.

• The tube can be cut using a wet silicon carbide cutting disk, and the ends of the inliner can be polished by flame heating.

• The capillary can be bent without damaging the inliner by means of a gas burner by heating in red flame.

• Shorter lengths like 30, 60 and 90 cm can also be delivered ex works. ​

Inside Ø mm

Outside Ø mm

Design ​

Unit m

Price EURO

0.25 0.5 0.5 0.25 0.25 0.25 0.5 0.5 0.75 0.75 0.75 1 1 0.76 0.76 2.16 2.16 2.2 2.2

0.8 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 6.4 6.4

coiled straight coiled straight coiled coiled straight coiled straight coiled coiled straight coiled straight coiled straight coiled straight coiled

3 1 3 1 3 30 1 3 1 3 30 1 3 1 3 1 3 1 3

133.00 59.00 133.00 59.00 133.00 864.00 59.00 133.00 59.00 133.00 949.00 59.00 133.00 59.00 133.00 82.00 185.00 164.00 369.00

THOMACHROM®-Stainless Steel Pipe 1.4401 Product specification Item ​ 84064 84066 84067 84068 84069 84070 84071 84072 84073

Inside Ø mm

Outside Ø inch

Length m

Unit piece

Price EURO

0.3 0.5 0.7 0.75 1 1.5 1.8 3 4

1/16“ 1/16“ 1/16“ 1/8“ 1/8“ 1/8“ 1/8“ 1/4“ 1/4“

1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8

1 1 1 1 1 1 1 1 1

251.00 251.00 251.00 251.00 251.00 251.00 251.00 379.00 379.00

THOMACHROM®-Stainless Steel Capillary - imperial ​

Item ​ 975269 975270 975271 975272 83392

Inside Ø mm

Outside Ø mm

Design ​

Unit m

Price EURO

0.13 0.18 0.25 0.25 0.25

0.8 0.8 0.5 0.5 0.8

straight coiled coiled coiled straight

1 3 1 3 1

54.00 121.00 54.00 121.00 59.00

• Seamless drawn stainless steel pipes, straightened, smoothed inner surface made of stainless steel 1.4401. ​

Item ​ 10750 10751 10752 10753 10754 97543 10755 97544 975451 975452 975461 975462

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

0.4 0.4 0.57 0.57 0.25 0.25 1.2 1.2 4 4 4.6 4.6

0.8 0.8 0.89 0.89 1.6 1.6 3.2 3.2 6.4 6.4 6.4 6.4

1 3 1 3 1 3 1 3 1 3 1 3

116.00 259.00 118.00 266.00 49.00 110.00 75.00 177.00 82.00 185.00 72.00 129.00

THOMAFLUID® II - 2015 81

Tubing - Hose-/Tubing clamps

Clamps and Cutters

THOMACHROM®-Stainless Steel Capillary - 1.4301 Product specification

Item ​ 61400 61401 61402 61403 61404 61405 61406 61407 61408 61409 61410 61413 61415

• Hard drawn, hardened and tempered surface, stainless steel 1.4301 (AISI 304). ​

Item ​ 975401 975402 975411 975412 975421 975422

Inside Ø mm

Outside Ø mm

Unit m

Price EURO

0.5 0.5 1 1 2.16 2.16

1 1 2 2 3.18 3.18

1 3 1 3 1 3

69.00 165.00 46.00 105.00 46.00 105.00

Clamping range mm

Strip width mm

Unit piece

Price EURO

23 - 25 25 - 27 27 - 29 31 - 33 33 - 35 35 - 37 37 - 39 42 - 44 44 - 48 49 - 52 52 - 56 65 - 67 75 - 77

6 6 6 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

10 10 10 10 10 10 10 5 5 5 5 5 5

13.00 13.00 13.00 16.00 16.00 16.00 16.00 13.00 13.00 13.00 13.00 16.00 20.00

THOMAFLUID®-Hose Clamp made of steel Technical specification

• Strip and housing: stainless steel 1.4016 • Screw: zinc-plated steel ​

Clamps and Cutters Hose-/Tubing clamps THOMAFLUID®-Hose Clamp made of POM Product specification

• Reusable hose clamp made of plastics, quicker and easier to handle than conventional screw clamps and spring clamps, can be placed after positioning the tubing. This means a considerable advantage for installation and maintenance work.

Item ​ 19023 19024 19025 19026 97139 97140 19027 97141 19028 19029 19030 19031

​

Item ​ 61390 61391 61392 61393 61394 61395 61396 61397 61398

Clamping range mm

Strip width mm

Unit piece

Price EURO

9 - 10 10 - 11 11 - 12 12 - 14 13 - 15 15 - 17 17 - 19 18 - 20 20 - 22

6 6 6 6 6 6 6 6 6

10 10 10 10 10 10 10 10 10

11.00 11.00 11.00 11.00 11.00 11.00 13.00 13.00 13.00

Strip width mm

Unit piece

Price EURO

7 - 11 11 - 19 8 - 12 10 - 16 8 - 16 12 - 22 16 - 27 20 - 32 25 - 40 16 - 27 20 - 32 25 - 40

5 5 7.5 7.5 9 9 9 9 9 12 12 12

10 10 10 10 10 10 10 10 10 10 10 10

25.00 25.00 25.00 25.00 25.00 27.00 30.00 30.00 30.00 30.00 30.00 30.00

THOMAFLUID®-Hose Clamp „Safety“ Product specification

• Flush-closing safety hose mounting clamps made of stainless steel strip 1.4301 (18/9), pressing on the total circumference constantly and material saving by means of special hook arresting and strap connection, fitted with a stepless, easily releasable screw lock. Two practice-oriented basic versions with overlapping clamp diameters between 26 mm and 110 mm resp. for varying applications of load and all kinds of tubing materials: strip width 7 mm (strip thickness 0.6 mm) and strip width 9 mm (strip thickness 0.8 mm) respectively.

Packages of 5 or 10 pieces each. ​

82 THOMAFLUID® II - 2015

Clamping range mm

Tubing - Hose-/Tubing clamps

Item ​ 47653 47654 47657 47658 47661 47662 47665 47666 47669 47670 47671 47672 47673 47674 47677 47678 47681 47682 47685 47686 47689 47690 47693 47694 47697 47698 47701 47702 47705 47706 47709 47710 47713 47714

Clamps and Cutters

Clamping range mm

Strip width mm

Unit piece

Price EURO

Item ​

26 - 32 26 - 32 30 - 36 30 - 36 34 - 40 34 - 40 38 - 45 38 - 45 43 - 50 43 - 50 48 - 55 48 - 55 48 - 55 48 - 55 49 - 60 49 - 60 54 - 65 54 - 65 59 - 70 59 - 70 64 - 75 64 - 75 69 - 80 69 - 80 74 - 85 74 - 85 79 - 90 79 - 90 84 - 95 84 - 95 89 - 100 89 - 100 94 - 105 94 - 105

9 9 9 9 9 9 9 9 9 9 7 7 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

31.00 44.00 34.00 46.00 34.00 46.00 34.00 46.00 34.00 46.00 36.00 49.00 36.00 49.00 36.00 49.00 39.00 52.00 39.00 52.00 39.00 52.00 41.00 54.00 41.00 54.00 41.00 54.00 41.00 54.00 49.00 57.00 49.00 57.00

47719 47720 47721 47722 47723 47724 47725 47726 47729 47730 47733 47734 47737 47738 47741 47742 47745 47746 47749 47750 47753 47754 47757 47758 47761 47762 47765 47766 47769 47770 47773 47774 47777 47778 47781 47782

THOMAFLUID®-Hose Clamp „Safety“ with Clip Product specification

• Flush-closing safety hose mounting clips made of stainless steel strip 1.4301 (18/9), pressing on the total circumference constantly and material saving by means of special hook arresting and strap connection, fitted with a stepless, easily releasable screw lock self-reclamping by a special spring mechanism. Two practice-oriented basic versions with overlapping clamp diameters between 26 mm and 110 mm resp. for varying applications of load and all kinds of tubing materials: strip width 7 mm (strip thickness 0.6 mm) and strip width 9 mm (strip thickness 0.8 mm) respectively. Packages of 5 or 10 pieces each.

Clamping range mm

Strip width mm

Unit piece

Price EURO

26 - 32 26 - 32 26 - 32 26 - 32 30 - 36 30 - 36 30 - 36 30 - 36 34 - 40 34 - 40 38 - 45 38 - 45 43 - 50 43 - 50 48 - 55 48 - 55 49 - 60 49 - 60 54 - 65 54 - 65 59 - 70 59 - 70 64 - 75 64 - 75 69 - 80 69 - 80 74 - 85 74 - 85 79 - 90 79 - 90 84 - 95 84 - 95 89 - 100 89 - 100 94 - 105 94 - 105

7 7 9 9 7 7 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

34.00 49.00 36.00 52.00 39.00 54.00 39.00 54.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 44.00 57.00 49.00 59.00 49.00 59.00 49.00 59.00

THOMAFLUID®-Tubing Clamp made of POM Product specification

• With the hose clamp, the hose can be squeezed step-wise or completely compressed as required • Non-distorting, non-bracing, for thin-walled tubing.

• Used with one hand.

• White acetal, steam-sterilizable, rust- and corrosion-resistant, permanently elastic and hygienic ​

​

THOMAFLUID® II - 2015 83

Tubing - Hose-/Tubing clamps

Clamps and Cutters

Product specification

• Made of zinc-plated steel • Suitable for clamping of thick-walled vacuum tubing.

• Temperature resistant up to +150 °C ​

Item ​

For tubing outside Ø mm

Unit piece

Price EURO

10 15 20 30

6 6 6 3

36.00 60.00 75.00 57.00

70005 70006 70007 11995 Item ​ 60438 62088 62089

For tubing outside Ø mm

Length mm

Unit piece

Price EURO

1-5 3 - 10 6 - 15

25 40 55

24 12 6

36.00 36.00 45.00

THOMAFLUID®-Tubing Clamp made of Stainless Steel V2A Product specification

• Well suited for closing of tubing at flat-bottomed flasks in laboratories.

For tubing with O.D. up to 14 mm.

THOMAFLUID®-Tubing Clamp made of PBT

​

Product specification

• Tubing clamps made of dyed, glass fibre reinforced, thermoplastic polyester (PBT).

• Stepless adjustment of flow rates with only one finger by moving the roller.

• No corrosion of the clamp.

• No reduction of closure power with longer lasting use.

• Even in opened position the clamp cannot fall down, because housing and roller totally enclose the tubing. ​

Item ​

For tubing outside Ø mm

Unit piece

Price EURO

1 - 14

5

72.00

61268

THOMAFLUID®-Tubing Screw Clamp ​

Item ​ 61267 40203 40204 61265

For tubing outside Ø mm

Colour

Unit

Price

​

piece

EURO

4.5 6 10 14

red yellow blue red

10 10 10 10

46.00 52.00 57.00 67.00

THOMAFLUID®-Tubing Clamp for Vacuum Tubing

Item ​ 60447

For tubing outside Ø mm

Material

Unit

Price

​

piece

EURO

1 - 12

POM

3

57.00

THOMAFLUID®-Tubing Spring Clip Product specification

• Made of acetal copolymer and stainless steel, excellently suitable for all flexible tubing types • Resistant to chemicals • Available in two sizes: for tubing with O.D. up to 8 and up to 12 mm ​

84 THOMAFLUID® II - 2015

Tubing - Hose-/Tubing clamps

Clamps and Cutters

THOMAFLUID®-Tubing Holder Product specification

• For permanent location and adaption of tubings.

• Alternatively for two, three, and four tubes abreast. ​

Item ​

For tubing outside Ø mm

Unit piece

Price EURO

0-8 0 - 12

3 3

39.00 45.00

60439 60440

THOMAFLUID®-Capillary Tubing Guide

Item ​

Product specification

14601 14602 14603 14604 14605 14606 14607 14608 14609 14610 14611 14612 14613

• For permanent location and laying of capillaries with outside diameter 1.6 mm (1/16“), tubing guide with 90° or 180° angle. ​

Item ​ 14628 14629

Design ​

Unit piece

Price EURO

90° angle 180° angle

6 6

39.00 39.00

THOMAFLUID®-Tubing Guide

For tubing outside Ø mm

Number of tubing ​

Unit piece

Price EURO

4 4 4 6 6 6 8 8 8 10 10 12 12

2 3 4 2 3 4 2 3 4 2 4 2 4

10 10 10 10 10 10 10 10 10 10 10 10 10

15.00 17.00 19.00 15.00 21.00 19.00 18.00 19.00 23.00 21.00 24.00 24.00 27.00

THOMAFLUID®-Tubing Clamp Ledge Product specification

• Ledges mountable with grooved drive studs for arranged accommodation of tubing varying in diameter.

• Grooved drive studs fitted with flat head. ​

Product specification

• For permanent location and laying of tubing in an approx. 90° angle.

• Individually mountable using grooved drive studs with flat head.

• Colour: blue ​

Item ​

Item ​ 14630 14631 14632

For tubing outside Ø Min. bending radius Unit mm mm piece 6 8 11.6

10 21 33.5

10 10 10

Price EURO 39.00 49.00 59.00

14614 14615 14616 14617 14618 14619 14620

For tubing outside Ø Number of clamps Unit mm ​ piece 4-5 6 8 10 11.6 14 - 15 20 - 22

10 10 10 6 6 1 1

5 5 5 5 5 5 5

Price EURO 37.00 42.00 42.00 46.00 57.00 46.00 46.00

THOMAFLUID® II - 2015 85

Tubing - Hose-/Tubing clamps

Clamps and Cutters

RCT®-Accessories: Grooved Drive Studs with Flat Head Product specification

• Accessories for THOMAPLAST®-Tubing Guides and Tubing Clamp Ledges. ​

Item ​ 14621 14653

For tubing guide / tubing clamp ledges ​

Unit piece

Price EURO

14614 14615, 14616, 14617, 14618, 14630, 14631, 14632

25

5.00

25

5.00

THOMAFLUID®-PE Spiral Wrap

Item

Product specification

​

• For bundling and arranging of tubing and cables of various dimensions.

• Grouping spiral colour-coded.

350006 350007 350008 350009

​

For pipes outside Ø mm

L

h

h1

H

Unit

Price

mm

mm

mm

mm

piece

EURO

16 20 25 32

32 32 41 49

24 25 26 30

11 11 12 11

32 34 35 44

20 20 20 20

25.00 28.00 32.00 41.00

THOMAFLUID®-Pipe Clamp made of PP Product specification

Item ​ 14633 14634 14635 14636 14637 14638 14639 14641 14642 14643

Clamping range mm

Strip width

Colour

Unit

5 - 20 8 - 40 10 - 60 14 - 80 5 - 20 8 - 40 10 - 60 5 - 20 8 - 40 10 - 60

Price

mm

​

m

EURO

5 8 11 13 5 8 11 5 8 11

nature nature nature nature black black black blue blue blue

10 10 10 10 10 10 10 10 10 10

44.00 64.00 95.00 146.00 44.00 64.00 131.00 44.00 64.00 100.00

• Pipe clamps made of highly elastic polypropylene (PP) for attachment of pipes made of plastics and metals, tubing, cables etc.

• Stable, highly elastic clamp body • More than 240° pipe embracing • Good temperature resistance • Good chemical resistance • Hydrolysis-resistant • Very good dielectric properties • Good mechanical stability • Not cold-resistant (embrittlement) • Simple fastening

Technical specification

• Material: PP (polypropylene) • Colour: grey, RAL 7032 • Temperature range: +10 to +80 °C ​

Pipe Clips/-Clamps THOMAFLUID®-Pipe Clamp made of HDPE Product specification

• Pipe clamps made of elastic, chemical-resistant polyethylene (PE) for attachment of pipes made of plastics and metals, tubing, cables etc.

• Resistant to weather and UV-stabilized • Stable, highly elastic clamp body • More than 240° pipe embracing • Simple fastening

Technical specification

• Material: HDPE (polyethylene, rigid, high density) • Colour: black, RAL 9011 • Temperature range: -20 to +70 °C ​

86 THOMAFLUID® II - 2015

Item ​ 350010 350011 350012 350013

For pipes outside Ø mm

L

h

h1

H

Unit

Price

mm

mm

mm

mm

piece

EURO

16 20 25 32

32 32 41 49

24 25 26 30

11 11 12 11

32 34 35 44

20 20 20 20

25.00 28.00 32.00 41.00

Tubing - Pipe Clips/-Clamps

Clamps and Cutters

THOMAFLUID®-Pipe Clamp Ledge made of LDPE

THOMAFLUID®-Pipe Clip made of PP

Product specification

Product specification

• Pipe clamp ledges made of polyethylene for dependable, room-saving attachment of plastic and metal pipes, plastic-coated copper pipes, as well as of tubing and cables.

• Stable, highly elastic clamp body.

• Time-saving, simple assembly.

Technical specification

• Material: LDPE (polyethylene) • Colour: nature • Temperature range: -20 to +50 °C

Technical specification

​

Item ​ 350014 350015 350016 350017 350018 350019 350020 350021

• Robust pipe clips made of polypropylene (PP) with dimensionally stable shackle made of resistant PVC-U. VCI-design • Good temperature resistance • Good chemical resistance • Hydrolysis-resistant • Very good dielectric properties • Good mechanical stability

For pipes outside Ø mm

B

L

h

H

Unit

Price

mm

mm

mm

mm

piece

EURO

6 8 10 12 15 18 22 28

15 15 15 15 15 15 15 15

12 16 20 24 27 31 36 44

10 10 14 14 26 26 26 26

14 16 20 21 34 35.5 37 39

50 50 50 50 25 25 25 25

31.00 33.00 36.00 41.00 33.00 36.00 41.00 46.00

• Clip body: Material: PP (polypropylene) Colour: grey, RAL 7032 Temperature range: -10 to +80 °C • Clip shackle: Material: PVC-U (polyvinyl chloride, without plasticizers) Colour: gray, RAL 7011 ​

Item ​ 350003 350004 350005

For pipes Width outside Ø mm mm 40 50 63

25 25 25

L

h

H

Unit

Price

mm

mm

mm

piece

EURO

58 69 84

43 47 57

68 77 94

10 10 10

24.00 29.00 35.00

THOMAFLUID®-Pipe Clip made of HDPE Product specification

• Extremely robust pipe clips made of elastic, chemical-resistant polyethylene (PE) with dimensionally stable shackle made of resistant PVC-U. VCI-design • Elastic and chemical-resistant

Cutters and Saws THOMAFLUID®-Tubing Cutter up to Ø 13 mm

Technical specification

• Clip body: Material: HDPE (HD-polyethylene) Colour: black, RAL 9011 Temperature range: -20 to +50 °C • Clip shackle: Material: PVC-U (polyvinyl chloride, without plasticizers) Colour: grey, RAL 7011 ​

Product specification

• For cutting of tubing with outside diameters varying from 1 to 13 mm.

• The jaws of the cutter are slightly spring-loaded and automatically closing.

• The interchangeable steel blades produce a burr-free, right-angled cut. ​

Item ​ 61460 83399 Item ​ 350000 350001 350002

For pipes B outside Ø mm mm 40 50 63

25 25 25

Design ​

Unit piece

Price EURO

Cutter Replacement blade

1 2

34.00 29.00

L

h

H

Unit

Price

mm

mm

mm

piece

EURO

THOMAFLUID®-Tubing Cutter up to Ø 35 mm

58 69 84

43 47 57

68 77 94

10 10 10

24.00 29.00 35.00

Application area

• Cutting of pipes, tubing, and solid materials made of all kinds of plastics, including profile semifinished products as well as fibre reinforced and laminated tubing materials.

THOMAFLUID® II - 2015 87

Tubing - Cutters and Saws

Clamps and Cutters

Product specification

• Cutting gun with special, self-resetting and interchangeable cutting tool for materials with diameters up to 35 mm, burr-free cuts of high angularity ensured by involved cutting device; safely to handle, to operate easily and without expenditure of force. ​

Item ​ 49994 49995

Design ​

Unit piece

Price EURO

Cutter Replacement blade

1 1

90.00 39.00

covered knife-like hard metal rotary cutter and slip-proof arresting device for the capillary to be prepared.

• The capillary is inserted on its cutting site into the deeply grooved keeper slot of the THOMACHROM®-Metal Capillary Cutter and arrested in the loading device by the salient non-slip knurled screw. Thereby, the rotary cutter is pressed against the capillary. By rotating the cutter around the capillary, it is cut in constantly and neatly. Thereafter, the knurled screw is tightened again and the notch is deepened to the required extent as described above. The arresting is unlocked and by slightly pressing at the thus produced predetermined breaking-point the correctly pre-cutted capillary is broken burr-free.

​

Item ​

THOMAFLUID®-Tubing Cutting Pliers ​

83384 83385

Design ​

Unit piece

Price EURO

Cutter Replacement blade

1 1

145.00 36.00

THOMACHROM®-Pipe Saw Product specification

• For cutting of capillaries varying in diameter from 1.6 to 3.2 mm. ​

Item ​ 14654 14655

Design ​

Unit piece

Price EURO

Cutting pliers Replacement blade

1 1

79.00 13.00

THOMAFLUID®-Capillary Cutter Guillotine Product specification

• For burr-free and absolutely perpendicular cutting of rigid capillaries made of PEEK, PTFE, PVDF, PFA, FEP, ETFE, PA and PE with outside diameters varying from 1/16” (1.6 mm) to 1/8” (3.2 mm) • Cutting blade is interchangeable (replacement blade)

Item ​

Design ​

Unit piece

Price EURO

97511

Cutter

1

99.00

​

THOMACHROM®-Pipe Cutter Product specification

• For easy cutting (rotation) of tubes made of every kind of material, from diameters of 3 mm onwards, with replacement rotary cutter. ​

Item ​ 14626 14627

Design ​

Unit piece

Price EURO

Cutter Replacement blade

1 3

46.00 16.00

THOMACHROM®-Capillary Cutter made of Metal

Item ​

Design ​

Unit piece

Price EURO

Product specification

97510

Cutter

1

61.00

• Tool for precise cutting and preparing of 1/16“ metal capillaries (stainless steel, titanium etc.) and steel jacketed glass capillaries, for dimensionally stable, perpendicular, and burr-free cuts without alteration of lumen and correction of the cutting site.

• Safe to handle loading device made of anodized light metal with

88 THOMAFLUID® II - 2015

Fittings - Luer-Lock Connectors

One-Piece Connectors - Plastics

THOMAFLUID®-Luer Tubing Adapter (Male) with Non-Twistable Adapter Fit

One-Piece Connectors - Plastics Luer-Lock Fittings Connectors

Product specification

THOMAFLUID®-Luer-Lock Connectors General product specification

• Luer-connectors are alternatively fully made of white PA (polyamide 6.6, nylon), PP (polypropylene), transparent-clear PC (polycarbonate) or modified, radiation-stabilized polycarbonate (RSPC), for flexible plastic tubing commonly used in labs. Sterilizable by autoclaving (PA), ethylene oxide (PP limited, PA, PC, RSPC) and gamma rays (PA and PP limited; PC; RSPC - without discolouration up to 10 Mrad).

• Precision adapters, male Luer to inched hose nozzles, integrated stop for optional fitting for Luer-lock locking (Cat. Nr. 15730 to 15738) with non-twistable adapter fit, either with short nozzle for elastic tubing or with long nozzle for less elastic tubing. ​

​

THOMAFLUID®-Luer-Tubing Adapter (Male) for Flexible Tubing Product specification

• Precision adapters, male Luer to inched hose nozzles ​

Item ​ 15717 15718 15719 15721 15722 15728 Item ​ 158440 158441 158442 158443 158444 158445 158446 158447 158448 158449 158450 158451 158452 158453 158454 158455 158456 158457 158458 158459 158460 158461 158462 158463

For tubing inside Ø inch

For tubing inside Ø mm

Material

Unit

Price

​

piece

EURO

1/16“ 1/16“ 1/16“ 1/16“ 3/32“ 3/32“ 3/32“ 3/32“ 1/8“ 1/8“ 1/8“ 1/8“ 5/32“ 5/32“ 5/32“ 5/32“ 3/16“ 3/16“ 3/16“ 3/16“ 1/4“ 1/4“ 1/4“ 1/4“

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4

PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

31.00 36.00 41.00 41.00 31.00 36.00 41.00 41.00 31.00 36.00 41.00 41.00 36.00 41.00 46.00 46.00 36.00 41.00 46.00 46.00 36.00 41.00 46.00 46.00

For For tubing tubing inside Ø inside Ø inch mm 3/32“ 1/8“ 1/8“ 1/16“ 1/16“ 1/8“

2.4 3.2 3.2 1.6 1.6 3.2

Design

Material

Unit

Price

​

​

piece

EURO

short short short long long long

PC PA PP PA PP PP

15 20 20 20 20 20

54.00 52.00 62.00 52.00 62.00 62.00

THOMAFLUID®-Luer-Lock Fitting with Non-Twistable Fit for Luer Tubing Adapter Product specification

• Colour-coded fittings with tight fit for THOMAFLUID® Luer tubing adapters, items 15717 to 15728, integrated stop for non-twistable fit, alternatively made of polyamide (PA, nylon), coded in colour white or made of opal polypropylene (PP) or transparent-clear polycarbonate (PC). ​

Item ​ 15730 15737 15738

Material ​

Colour ​

Unit piece

Price EURO

PA PP PC

white opal clear

10 10 10

41.00 46.00 46.00

THOMAFLUID® II - 2015 89

Fittings - Luer-Lock Connectors

One-Piece Connectors - Plastics

THOMAFLUID®-Luer Tubing Adapter (Male) with Round Tight Fit Product specification

• Precision adapters, male Luer to inched hose nozzles, integrated stop for optional fitting for Luer-lock locking with round adapter tight fit (item 15748 to 15756), for elastic tubing. ​

Item ​

Item ​ 15742 15744

For tubing inside Ø inch

For tubing inside Ø mm

Material

Unit

​

piece

EURO

3/32“ 3/32“

2.4 2.4

PA PC

20 10

52.00 36.00

15664 15665 15666 15667 15668 15669 15670 15671 15672 15673 15674 15675 15676 15677 15678 15679 15680 15681 15682 15683 15704 15705 15706 15707

Price

THOMAFLUID®-Luer-Lock Fitting with Round Tight Fit for Luer Tubing Adapter Product specification

• Colour-coded fittings with tight fit for THOMAFLUID® Luer tubing adapters, items 15742 and 15744, alternatively made of polyamide (PA, nylon), coded in colours white, black or made of opal polypropylene (PP) or transparent-clear polycarbonate (PC). ​

For tubing inside Ø inch

For tubing inside Ø mm

Material

Unit

Price

​

piece

EURO

1/16“ 1/16“ 1/16“ 1/16“ 3/32“ 3/32“ 3/32“ 3/32“ 1/8“ 1/8“ 1/8“ 1/8“ 5/32“ 5/32“ 5/32“ 5/32“ 3/16“ 3/16“ 3/16“ 3/16“ 1/4“ 1/4“ 1/4“ 1/4“

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4

PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC

20 15 10 10 20 15 10 10 20 15 10 10 15 10 10 10 15 10 10 10 15 15 10 10

62.00 54.00 41.00 41.00 62.00 54.00 41.00 41.00 62.00 54.00 41.00 41.00 54.00 41.00 46.00 46.00 54.00 41.00 46.00 46.00 54.00 63.00 46.00 46.00

THOMAFLUID®-Luer-Lock Tubing Adapter (Male) for Rigid Tubing Product specification Item ​ 15748 15749 15755 15756

Material ​

Colour ​

Unit piece

Price EURO

PA PA PP PC

white black opal clear

10 10 10 10

41.00 41.00 46.00 46.00

THOMAFLUID®-Luer-Lock Tubing Adapter (Male) for Flexible Tubing Product specification

• Precision adapters, male Luer-lock to inched hose nozzles ​

90 THOMAFLUID® II - 2015

• Precision adapters, male Luer-Lock to inched nozzles specially designed for PTFE, polyethylene and other poorly elastic tubing.

​

Fittings - Luer-Lock Connectors Item ​ 15684 15685 15686 15688 15689 15691 15692 15693 15694 15695 15696 15697 15698 15699 15700 15701 15702 15703

One-Piece Connectors - Plastics

For tubing inside Ø inch

For tubing inside Ø mm

Material

Unit

Price

Item

​

1/16“ 1/16“ 1/16“ 3/32“ 3/32“ 3/32“ 1/8“ 1/8“ 1/8“ 1/8“ 5/32“ 5/32“ 5/32“ 5/32“ 3/16“ 3/16“ 3/16“ 3/16“

1.6 1.6 1.6 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8

PA PP PC PA PP RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC

piece

EURO

​

20 15 10 20 15 10 20 15 10 10 15 10 10 10 15 10 10 10

62.00 54.00 41.00 62.00 54.00 41.00 62.00 54.00 41.00 41.00 54.00 41.00 46.00 46.00 54.00 41.00 46.00 46.00

15774 15775 15776 15708 15709 15710 15711

For tubing inside Ø inch

For tubing inside Ø mm

Material

Unit

Price

​

piece

EURO

3/16“ 3/16“ 3/16“ 1/4“ 1/4“ 1/4“ 1/4“

4.8 4.8 4.8 6.4 6.4 6.4 6.4

PP PC RSPC PA PP PC RSPC

10 10 10 20 15 15 15

36.00 41.00 41.00 62.00 54.00 63.00 63.00

THOMAFLUID®-Luer-Lock Tubing Adapter (Female) for Rigid Tubing Product specification

• Precision adapters, female Luer-Lock to inched nozzles specially designed for less elastic tubing. ​

THOMAFLUID®-Luer-Lock Tubing Adapter (Female) for Flexible Tubing Product specification

• Precision adapters, female Luer-Lock to inched hose nozzles. ​

Item ​

Item ​ 15757 15758 15759 15760 15761 15762 15763 15764 15765 15766 15767 15768 15769 15770 15771 15772 15773

For tubing inside Ø inch

For tubing inside Ø mm

Material

Unit

Price

​

piece

EURO

1/16“ 1/16“ 1/16“ 1/16“ 3/32“ 3/32“ 3/32“ 3/32“ 1/8“ 1/8“ 1/8“ 1/8“ 5/32“ 5/32“ 5/32“ 5/32“ 3/16“

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8

PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA

20 15 10 10 20 15 10 10 20 15 10 10 15 10 10 10 15

52.00 48.00 36.00 36.00 52.00 48.00 36.00 36.00 52.00 48.00 36.00 36.00 48.00 36.00 41.00 41.00 48.00

15777 15778 15779 15780 15781 15782 15783 15784 15785 15786 15787 15788 15789 15790 15791 15792 15793 15794 15795 15796

For tubing inside Ø inch

For tubing inside Ø mm

Material

Unit

Price

​

piece

EURO

1/16“ 1/16“ 1/16“ 1/16“ 3/32“ 3/32“ 3/32“ 3/32“ 1/8“ 1/8“ 1/8“ 1/8“ 5/32“ 5/32“ 5/32“ 5/32“ 3/16“ 3/16“ 3/16“ 3/16“

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8

PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC PA PP PC RSPC

20 15 10 10 20 15 10 10 20 15 10 10 15 10 10 10 15 10 10 10

52.00 48.00 36.00 36.00 52.00 48.00 36.00 36.00 52.00 48.00 36.00 36.00 48.00 36.00 41.00 41.00 48.00 36.00 41.00 41.00

THOMAFLUID® II - 2015 91

Fittings - Luer-Lock Connectors

One-Piece Connectors - Plastics

THOMAFLUID®-Luer-Lock Screw Cap (Male)

Item ​

Product specification

Material ​

Unit piece

Price EURO

PA PP PC

20 20 10

32.00 36.00 26.00

15804 15805 15806

• Luer-lock screw caps for locking of female Luer-outlets ​

THOMAFLUID®-Luer End Plug (Male) with finger handle or loop Product specification

• Luer insertion plugs for locking of female Luer-outlets, alternatively with finger handle and flat end or without finger handle but involved loop for threading through a safety line ​

Item ​ 15797 15798 15799 15800 15801

Material ​

Colour ​

Unit piece

Price EURO

PA PA PP PC RSPC

white red opal clear clear

20 20 20 20 20

32.00 32.00 36.00 42.00 42.00

THOMAFLUID®-Luer-Lock Screw Cap (Male) with Venting Channel Product specification

Item ​ 15807 15808 15809 15810 15811 15812

• Luer-lock screw caps with involved venting channel for locking of female Luer-outlets ​

Material ​

Design ​

Unit piece

Price EURO

PA PP PC PA PP PC

with finger handle with finger handle with finger handle without finger handle without finger handle without finger handle

10 10 10 10 10 10

26.00 31.00 36.00 26.00 31.00 36.00

THOMAFLUID®-Luer-Lock Screw Cap (Female) with Knurled Handle Product specification Item ​ 15802 15803

Material ​

Unit piece

Price EURO

PA PP

20 20

32.00 36.00

• Luer-lock screw cap with knurled ring and flat end for locking of male Luer-outlets ​

THOMAFLUID®-Luer-Lock End Plug (Male) Product specification

• Luer-lock end plugs for locking of female Luer-outlets ​

Item ​ 15813 15814 15815 15816 15817

92 THOMAFLUID® II - 2015

Material ​

Colour ​

Unit piece

Price EURO

PA PA PP PC RSPC

white red opal clear clear

10 10 10 10 10

26.00 26.00 31.00 36.00 36.00

Fittings - Luer-Lock Connectors

One-Piece Connectors - Plastics

THOMAFLUID®-Luer-Lock Screw Cap (Female)

Product specification

• Coupling pieces with female Luer-lock on both sides, either with knurling or finger handle

Product specification

• Luer cap for locking of male Luer outlets with finger handle and involved loop for threading through a safety line

Item ​

​

158261 15827 15828 15829 15830 15831

Material ​

Design ​

Unit piece

Price EURO

PA PP PC PA PP PC

with knurling with knurling with knurling with finger handle with finger handle with finger handle

10 10 10 10 10 10

31.00 36.00 41.00 31.00 36.00 41.00

THOMAFLUID®-Luer-Lock Elbow Coupling Piece (Female/Female) Item ​

Material ​

Unit piece

Price EURO

PA PP PC

10 10 10

26.00 31.00 36.00

15818 15819 15820

Product specification

• Right angle coupling pieces with female Luer-lock on both sides ​

THOMAFLUID®-Luer Coupling Piece (Male/Male) Product specification

• Insertion pieces for coupling, with male Luer outlet on both sides, either with or without finger handle ​

Item ​ 15832 15833 15834

Item ​ 15821 15822 15824 15825 15826

Material ​

Design ​

Unit piece

Price EURO

PA PP PA PP PC

without finger handle without finger handle with finger handle with finger handle with finger handle

10 10 10 10 10

31.00 36.00 31.00 36.00 41.00

Material ​

Unit piece

Price EURO

PA PP PC

5 5 5

36.00 39.00 44.00

THOMAFLUID®-Luer Elbow Coupling Piece (Female/Male) Product specification

• Right angle coupling pieces, one side with female Luer-lock, the other side with male Luer outlet ​

THOMAFLUID®-Luer-Lock Coupling Piece (Female/Female) ​

Item ​ 15835 15836 15837

Material ​

Unit piece

Price EURO

PA PP PC

5 5 5

36.00 39.00 44.00

THOMAFLUID® II - 2015 93

Fittings - Luer-Lock Connectors

One-Piece Connectors - Plastics

THOMAFLUID®-Luer-Lock T-Shaped Coupling Piece (Female/Female/Female) Product specification

Product specification

• Asymmetric T-coupling pieces: one side with female Luer-lock, at the opposite side male Luer outlet and in the right-angle to it female Luer-lock Item ​

• T-shaped coupling pieces, all sides with female Luer-lock ​

15844 15845 15846

Material ​

Unit piece

Price EURO

PA PP PC

5 5 5

44.00 46.00 49.00

THOMAFLUID®-Luer-Lock Adapter Series EMP-L3 General product specification

Item ​ 15838 15839 15840

Material ​

Unit piece

Price EURO

PA PP PC

5 5 5

36.00 39.00 44.00

THOMAFLUID -Luer T-Shaped Coupling Piece (Female/Male/Male) ®

Product specification

• Asymmetric T-coupling pieces: one side with female Luer-lock, at the opposite side and in the right-angle to it male Luer outlet ​

Item ​ 15841 15842 15843

Material ​

Unit piece

Price EURO

PA PP PC

5 5 5

44.00 46.00 49.00

THOMAFLUID®-Luer T-Shaped Coupling Piece (Female/Male/Female) ​

94 THOMAFLUID® II - 2015

• The connections used in Series EMP-L are manufactured with a LuerLock thread according to DIN 13090 (male or female). Common tubes, pipes, G- or UNF-threads can thus be combined.

• Available in PP, PVDF or PFA (high-quality materials) for chemically demanding applications • On request: all materials are available also electrically conductive • Threads are seamless according to DIN 13090 and offer various connection options

General technical specification

• PP (Polypropylene): Extremely good impact toughness and notch impact strength Higher hardness and stiffness as well as better resilience than PE Thermoforming possible Very good dielectrical properties Good resistance to alcohols, ketones, conc. acids and alkalis Not stable to aromatic hydrocarbons, fats and oils, halogenes Autoclavable Resistant to hydrolysis Physiologically safe Colour: grey Density: 0.90 g/cm3 Temperature range: +5 to +90 °C Shore hardness D: 72° Water absorption: <0.05 % Tensile strength: 25 - 40 N/mm2 Elongation at break: 800 % Surface resistance: >1013 Ohm Melt flow index MFR: 0.3 g/10 min.

• PVDF (Polyvinylidene fluoride): High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures Good breakdown strength Low dielectric loss factor Highest mechanical stability and stiffness Meeting highest purity requirements Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities Outstanding resistance to UV, weather and aging Flame-resistant High thermal stability Resistant to alcohols, fats and oils, halogenes, alkalis, acids Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid Colour: nature, slightly translucent

Fittings - Luer-Lock Connectors

One-Piece Connectors - Plastics

Density: 1.75 g/cm3 Temperature range: -40 to +140 °C Shore hardness D: 79° Water absorption: <0.04 % Tensile strength: 38 - 50 N/mm2 Surface resistance: >1013 Ohm Melt flow index MFR: 6 g/10 min.

• PFA (Perfluoroalkoxy): High-quality technical plastic for chemical apparatus and machine construction as well as electrical engineering Chemical, thermal and dielectrical properties practically such as PTFE, but suitable for thermoplastic processing (welding, die casting, deep drawing). Lower medium diffusion, better transparency, larger hardness and better dimensional stability (lower tendency to cold flow) compared to PTFE. Highest temperature resistance of all meltable fluorinated plastics Very high dimensional stability in heat Very high resistance to media Very good pressure resistance Low friction coefficient Can be treated by autoclave (absolute sterile) Comply with the guidelines from FDA and USP class VI. Excellent resistance to weather Flame-resistant Colour: milky, translucent Density: 2.10 g/cm3 Shore hardness D: 60° to 65° Temperature range: -200 to +200 °C (highest dimensional stability in heat) Coefficient of sliding friction: 0.2 - 0.3 (dynamic against steel, dry) Tensile strength: 27 to 32 N/mm2 at +23 °C Water absorption: <0.03 % Dielectric constant: 2,1 Surface resistance: >1017 Ohm

THOMAFLUID®-Luer-Lock Tubing Adapter (Female) • Female luer-lock adapter for connecting tubing with inside-Ø 4 mm and outside-Ø 6 mm.

• The connector is suitable for max. 10 bar (at +20 ° C) ​

Item ​

NW mm

l1 mm

L mm

158300 158301 158302

4/6 4/6 4/6

7 7 7

29 29 29

Material Unit ​ piece PP PVDF PFA

1 1 1

Price EURO 11.00 16.00 29.00

THOMAFLUID®-Luer-Lock Pipe Adapter (Male) Product specification

• Male luer-lock adapter for connecting pipes or rigid tubing with an outside-Ø between 1.6 and 6.4 mm • The connector is suitable for max. 1 bar (at +20 ° C) ​

​

THOMAFLUID®-Luer-Lock Tubing Adapter (Male) Product specification

• Male luer-lock adapter for connecting tubing with inside-Ø 4 mm or 6 mm and outside-Ø 6 mm or 8 mm.

• The connector is suitable for max. 10 bar (at +20 ° C) ​

Item ​

Item ​

NW mm

L mm

Material ​

Unit piece

Price EURO

49996 49997 49999 49992 49993 49998

4/6 4/6 4/6 6/8 6/8 6/8

23 23 23 32 32 32

PP PVDF PFA PP PVDF PFA

1 1 1 1 1 1

10.00 15.00 28.00 13.00 19.00 35.00

158310 158311 158312 158313 158314 158315 158316 158317 158318 158319 158320 158321 158322 158323 158324 158325 158326

For pipes outside Ø mm 1.6 1.6 1.6 2 2 2 2.4 2.4 2.4 2.5 2.5 2.5 3 3 3 3.2 3.2

L

Material

Unit

Price

mm

​

piece

EURO

33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33

PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

16.00 23.00 35.00 16.00 23.00 35.00 16.00 23.00 35.00 16.00 23.00 35.00 16.00 23.00 35.00 16.00 23.00

THOMAFLUID® II - 2015 95

Fittings - Luer-Lock Connectors Item ​ 158327 158328 158329 158330 158331 158332 158333 158334 158335 158336 158337 158338 158339

For pipes outside Ø mm 3.2 4 4 4 5 5 5 6 6 6 6.4 6.4 6.4

L

One-Piece Connectors - Plastics Material

Unit

Price

Item

mm

​

33 33 33 33 33 33 33 33 33 33 33 33 33

PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA

piece

EURO

​

1 1 1 1 1 1 1 1 1 1 1 1 1

35.00 16.00 23.00 35.00 16.00 23.00 35.00 16.00 23.00 35.00 16.00 23.00 35.00

158371 158372 158373 158374 158375 158376 158377 158378 158379

THOMAFLUID®-Luer-Lock Pipe Adapter (Female)

For pipes outside Ø mm

l1

L

Material

Unit

mm

5 5 5 6 6 6 6.4 6.4 6.4

7 7 7 7 7 7 7 7 7

Price

mm

​

piece

EURO

35 35 35 35 35 35 35 35 35

PP PVDF PFA PP PVDF PFA PP PVDF PFA

1 1 1 1 1 1 1 1 1

18.00 25.00 37.00 18.00 25.00 37.00 18.00 25.00 37.00

THOMAFLUID®-Luer-Lock Adapter (Male) with Male Thread Product specification

• Male luer-lock adapter with male G-, UNF- or M-thread • The connector is suitable for max. 10 bar (at +20 ° C) ​

Product specification

• Female luer-lock adapter for connecting pipes or rigid tubing with an outside-Ø between 1.6 and 6.4 mm • The connector is suitable for max. 1 bar (at +20 ° C) ​

Item ​ Item ​ 158350 158351 158352 158353 158354 158355 158356 158357 158358 158359 158360 158361 158362 158363 158364 158365 158366 158367 158368 158369 158370

For pipes outside Ø mm

l1

L

mm

1.6 1.6 1.6 2 2 2 2.4 2.4 2.4 2.5 2.5 2.5 3 3 3 3.2 3.2 3.2 4 4 4

7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7

96 THOMAFLUID® II - 2015

Material

Unit

Price

mm

​

piece

EURO

35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18.00 25.00 37.00 18.00 25.00 37.00 18.00 25.00 37.00 18.00 25.00 37.00 18.00 25.00 37.00 18.00 25.00 37.00 18.00 25.00 37.00

External thread ​

158390 G 1/8“ 158391 G 1/8“ 158392 G 1/8“ 158393 G 1/4“ 158394 G 1/4“ 158395 G 1/4“ 158396 UNF 1/4“-28 158397 UNF 1/4“-28 158398 UNF 1/4“-28 158399 M5 x 0.8 158400 M5 x 0.8 158401 M5 x 0.8 158402 M6 x 1 158403 M6 x 1 158404 M6 x 1 158405 M8 x 1.25 158406 M8 x 1.25 158407 M8 x 1.25 158408 M10 x 1.5 158409 M10 x 1.5 158464 M10 x 1.5

l1

L

mm mm 8 8 8 12 12 12 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

20 20 20 26 26 26 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

WAF mm 14 14 14 17 17 17 14 14 14 14 14 14 14 14 14 17 17 17 17 17 17

Mate- Unit Price rial ​ piece EURO PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

8.00 12.00 29.00 10.00 15.00 36.00 10.00 15.00 36.00 10.00 15.00 36.00 10.00 15.00 36.00 13.00 19.00 41.00 16.00 24.00 46.00

Fittings - Luer-Lock Connectors

One-Piece Connectors - Plastics

THOMAFLUID®-Luer-Lock Adapter (Female) with Male Thread

Item ​

Product specification

158430 158431 158432

• Female luer-lock adapter with male G-, UNF- or M-thread.

• The connector is suitable for max. 10 bar (at +20 ° C). ​

Internal thread ​

l1

L

mm

mm

G 1/8“ G 1/8“ G 1/8“

10 10 10

20 20 20

WAF Material Unit (SW) mm ​ piece 14 14 14

PP PVDF PFA

1 1 1

Price EURO 12.00 16.00 38.00

Capillary Connectors (HPLC) THOMAFLUID®-Capillary Connectors General product specification

Item

l1

l2

L

158410 G 1/8“ 8 158411 G 1/8“ 8 158412 G 1/8“ 8 158413 G 1/4“ 12 158414 G 1/4“ 12 158415 G 1/4“ 12 158416 UNF 1/4“-28 8 158417 UNF 1/4“-28 8 158418 UNF 1/4“-28 8 158419 M5 x 0.8 6 158420 M5 x 0.8 6 158421 M5 x 0.8 6 158422 M6 x 1 8 158423 M6 x 1 8 158424 M6 x 1 8 158425 M8 x 1.25 8 158426 M8 x 1.25 8 158427 M8 x 1.25 8 158428 M10 x 1.5 8 158429 M10 x 1.5 8 158465 M10 x 1.5 8

7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7

20 20 20 26 26 26 20 20 20 21 21 21 23 23 23 23 23 23 23 23 23

​

External thread ​

WAF Mate- Unit Price rial mm mm mm mm ​ piece EURO 14 14 14 17 17 17 12 12 12 14 14 14 14 14 14 17 17 17 17 17 17

PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA PP PVDF PFA

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9.00 14.00 31.00 12.00 17.00 38.00 12.00 17.00 38.00 12.00 17.00 38.00 12.00 17.00 38.00 15.00 21.00 45.00 19.00 26.00 54.00

• MULTIFIT®-Flanged Fittings: MULTIFIT®-flanged fittings are pressure- and tensile-resistant tubing connections for fixed installation of tubing on metering systems, chromatographs, automatic analysers, hydraulic and pneumatic units, for pressure and vacuum, for all kinds of media in a wide temperature range. The connection can be established in two ways.

• 1. By means of a thermoflange: Advantage: Inexpensive and simple connection if a thermoflange machine is available. For PTFE tubing only.

Joint assembly: The tube is passed through the fitting hollow nut the thread of which points to the tube end. A washer is slipped over the tube. The flange is produced within seconds by pushing the tube on the electrically heated drift of the thermoflange machine. The flanged tube end with the washer behind it is inserted in the taphole of the coupling piece and the hollow nut is tightened manually.

• 2. By means of an adapter: Advantage: The connection is suitable not only for PTFE tubing but also for flexible tubing such as silicone or PVC. Joint assembly: The tube is passed through the fitting hollow nut the thread of which points to the tube end. The tube end is expanded by sliding it on the drift of the special tool. A fitting adapter, put on the retaining pin of the special tool, is inserted in the expanded tube end.

The tube end inserted into the adapter is slipped into the taphole of the coupling piece and the hollow nut is tightened manually.

THOMAFLUID®-Luer-Lock Adapter (Male) with Female Thread Product specification

• Male luer-lock adapter with female G-thread • The connector is suitable for max. 10 bar (at +20 ° C)

By means of an adapter

​

By means of a ferrule

THOMAFLUID® II - 2015 97

Fittings - Capillary Connectors (HPLC)

One-Piece Connectors - Plastics

MULTIFIT®-Straight Capillary Connector with Male Thread made of POM

Technical specification

• Material: PP • Temperature range: -10 bis +100 °C

Product specification

• Resistance to: alcohols, aldehydes, petrol, ethers, esters, glycols, motor oils, neutral salt solutions and water

Item ​

Technical specification

90842 90843 90844 90845 90846 90847 90848 90849 90850 90851 90852 90853 90854 90855

• Material: POM (polyacetal resin) • Colour: white • Temperature range: -20 to +90 °C • Design: knurled hollow screws with conical cavity at the end of the thread for insertion of the ferrule (sealing cone) made of ETFE • External thread: 1/4”-28 Gg-UNF-thread • Max. operating pressure: 250 bar • Outfit: hollow screw complete with ferrule (sealing cone) each ​

For pipes outside Ø inch

External thread ​

Colour

Unit

Price

​

piece

EURO

1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“

UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28

black red grey yellow green blue nature black red grey yellow green blue nature

5 5 5 5 5 5 5 5 5 5 5 5 5 5

46.00 46.00 50.00 46.00 46.00 46.00 46.00 46.00 46.00 50.00 46.00 46.00 46.00 46.00

MULTIFIT®-Straight Capillary Connector with Male Thread made of PTFE Item ​ 14735 14736 14737 14738 14739 14740 14741 14742 14743 14744 14745 14746

For pipes outside Ø inch

External thread ​

Colour

Unit

Price

​

piece

EURO

1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“

UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28

nature yellow red blue green black nature yellow red blue green black

10 10 10 10 10 10 10 10 10 10 10 10

69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00

Product specification

• Female screws, white, made of PTFE. • Pressure pads made of PA, included in delivery.

• Also to use with adapters 95211 and 95212 for flexible tubing.

Technical specification

• Material: PTFE • Temperature range: -200 bis +260 °C ​

MULTIFIT®-Straight Capillary Connector with Male Thread made of PP

Item

Product specification

​ 95200 95202

• Coloured female screws made of PP • Pressure pads made of PA, included in delivery • Different colours for differentiation of the media to be conveyed

For tubing inside Ø mm

For tubing outside Ø mm

External thread ​

Unit

Price

piece

EURO

1.6 - 2.4 0.8

3.2 1.6

UNF 1/4“-28 UNF 1/4“-28

5 5

47.00 47.00

​

MULTIFIT®-Ferrule made of Plastics Product specification

• Sealing cone (ferrule) made of chemical-resistant fluorinated plastic ETFE, made of biocompatible, thermically and chemically resistant polytetrafluoroethylene (PTFE), made of high-pressure and temperature resistant polyimide.

• For connection of plastic capillaries and tubing with metal-free set-ups. ​

98 THOMAFLUID® II - 2015

Fittings - Capillary Connectors (HPLC)

One-Piece Connectors - Plastics

MULTIFIT®-Threaded Sleeve made of PE Product specification

• Through connection with internal threads on both sides ​

Item ​ 95245

Internal thread ​

Unit piece

Price EURO

UNF 1/4“-28

5

34.00

MULTIFIT®-Threaded Sleeve made of PTFE Item ​

For pipes outside Ø inch

Material ​

Unit piece

Price EURO

1/16“ 1/8“ 1/16“ 1/32“ 1/16“ 1/8“ 1/4“

ETFE ETFE PTFE PI PI PI PI

10 10 5 5 5 5 5

38.00 38.00 31.00 60.00 60.00 60.00 65.00

Product specification

• Through connection, but screw-in depth is limited by stop ​

83436 83439 83641 83639 83642 83645 83668

MULTIFIT®-Adapter made of PCTFE Product specification

• For PTFE tubing, outside Ø (adapter) is equal to the inside Ø (tubing). ​

Item ​ 95230

Internal thread ​

Unit piece

Price EURO

UNF 1/4“-28

1

22.00

MULTIFIT®-T-Shaped Screwed Joint made of PTFE Product specification

• Through connection, but screw-in depth is limited by stop ​

Item ​ 95211 95212

For tubing inside Ø mm 2.4 1.6

For tubing outside Unit Ø mm piece 3.2 3.2

10 10

Price EURO 26.00 26.00

MULTIFIT®-Threaded Sleeve made of POM Item ​

Product specification

• Through connection with internal threads on both sides ​

95232

Internal thread ​

Unit piece

Price EURO

UNF 1/4“-28

1

46.00

MULTIFIT®-Cross Connector with Female Thread made of PTFE Product specification

• Through connection, but screw-in depth is limited by stop ​

Item ​ Item ​ 14747

Internal thread ​

Unit piece

Price EURO

UNF 1/4“-28

10

75.00

95233

Internal thread ​

Unit piece

Price EURO

UNF 1/4“-28

1

34.00

THOMAFLUID® II - 2015 99

Fittings - Capillary Connectors (HPLC)

One-Piece Connectors - Plastics

MULTIFIT®-Tool

Product specification

• 10 Capillary screw-in fittings for 1/16“ capillaries (item 14735-14740) (2 pieces each in the colours nature, yellow, red, blue, green, black).

• 10 Capillary screw-in fittings for 1/8“ capillaries (item 14741-14746) (2 pieces each in the colours nature, yellow, red, blue, green, black).

• 30 Ferrules for 1/16“ capillaries • 30 Ferrules for 1/8“ capillaries • 10 Adapter couplings (item 14747).

Product specification

• Tool for flanging of PTFE-tubing for MULTIFIT -adapters ®

​

Item ​ 14750

Unit piece

Price EURO

1

394.00

MULTIFIT®-Capillary Connecting Elements made of PEEK Item ​ 95220 95221 95222

For tubing inside Ø For tubing outside Ø Unit mm mm piece 1.6 2.4 0.7

3.2 3.2 1.5

1 1 1

Price EURO 36.00 36.00 36.00

MULTIFIT®-Thermoflange Machine Product specification

• For bordering of tubing thus producing a tube flange.

• Suitable for tubing made of PTFE, PE, PFA and FEP • 220 V, 50-60 Hz, with four heatable drifts, interchangeable for 0.3, 1.0, 1.6 and 2.4 mm tubing inside Ø resp. Operation in two planes possible.

With clamping pliers for the tube. ​

General product specification

• Polymer material of highest stability • Highest mechanical stability • Pressure-resistant and impact-resistant • High dimensional stability in heat • Good dielectrical properties • Free of extractable substances • Odourless and tasteless • Physiologically absolutely safe • Biocompatible • Highest chemical resistance, but not resistant to conc. sulfuric acid, nitric acid, and chloronitrous acid (aqua regia)

General technical specification

• Material: PEEK (polyether-etherketone) • Colour: yellow-brown • Max. temperature: +250 °C, for a short period +310 °C • Density: 1.4 g/cm3 • El. breakdown strength: 19 kV/mm (according to ASTM D 149) • Therm. expansion coefficient: 4.7 x 10-5 mm/degree ​

MULTIFIT®-Straight Capillary Connector with Male Thread and Ferrule made of PEEK Product specification

• Hollow screw complete with ferrule (sealing cone) each ​

Item ​ 95246

Unit piece

Price EURO

1

637.00

MULTIFIT®-Treasure Trove made of POM - 30 pieces ​

Item ​ 14757 14758 14759 14760 14761

100 THOMAFLUID® II - 2015

For pipes outside Ø inch

External thread ​

Colour

Unit

Price

​

piece

EURO

1/16“ 1/16“ 1/16“ 1/16“ 1/16“

UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28

nature yellow red blue green

3 3 3 3 3

54.00 54.00 54.00 54.00 54.00

Fittings - Capillary Connectors (HPLC) Item ​ 14762 14763 14764 14765 14766 14767 14768

One-Piece Connectors - Plastics

For pipes outside Ø inch

External thread ​

Colour

Unit

Price

​

piece

EURO

1/16“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“

UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28

black nature yellow red blue green black

3 3 3 3 3 3 3

54.00 54.00 54.00 54.00 54.00 54.00 54.00

MULTIFIT®-High-Pressure Straight Capillary Connector made of PEEK Product specification

• Fitted with fingertight fitting for capillaries of outer diameter 1/16“ on both sides, zero dead volume ​

MULTIFIT®-Straight Capillary Connector with Male Thread made of PEEK - one-piece ​

Item ​ 14770 1

Item ​

For pipes External Max. op. Colour outside Ø thread pressure1 inch ​ bar ​

14751 14752 14753 14754 14755 14756 1

1/16“ 1/16“ 1/16“ 1/16“ 1/16“ 1/16“

UNF 10-32 UNF 10-32 UNF 10-32 UNF 10-32 UNF 10-32 UNF 10-32

450 450 450 450 450 450

nature yellow red blue green black

Unit

Price

piece

EURO

3 3 3 3 3 3

45.00 45.00 45.00 45.00 45.00 45.00

For pipes outside Ø inch

Nominal width mm

Max. op. pressure1 bar

Price EURO

1/16“

0.3

700

49.00

at +20 °C

MULTIFIT®-High-Pressure T-Shaped Capillary Connector made of PEEK ​

at +20 °C

MULTIFIT®-Straight Capillary Connector with Male Thread made of PEEK - two-part ​

Item ​ 14728 14729 14730 1

For pipes outside Ø inch

Nominal width mm

Max. op. pressure1 bar

1/16“ 1/8“ 1/16“

0.8 1.5 0.3

70 70 300

Internal thread ​

Price EURO

UNF 1/4“-28 64.00 UNF 1/4“-28 64.00 UNF 10-32 73.00

at +20 °C

MULTIFIT®-High-Pressure Cross Capillary Connector made of PEEK ​

Item ​

For pipes External Max. op. Colour outside Ø thread pressure1 inch ​ bar ​

14727 1

1/16“

UNF 10-32

280

nature

Unit

Price

piece

EURO

3

63.00

at +20 °C

THOMAFLUID® II - 2015 101

Fittings - Mini Barb Connectors (1.6 - 6.4 mm) Item ​ 14731 14732 14733 1

For pipes outside Ø inch

Nominal width mm

Max. op. pressure1 bar

1/16“ 1/8“ 1/16“

0.8 1.5 0.3

70 70 300

One-Piece Connectors - Plastics

Internal thread ​

Price

THOMAFLUID®-Mini Barb Connector - with collar

EURO

Product specification

UNF 1/4“-28 68.00 UNF 1/4“-28 68.00 UNF 10-32 86.00

• Tubing connection on both sides, for flexible tubing ​

at +20 °C

Mini Barb Connectors (I-Ø: 1.6 - 6.4 mm) THOMAFLUID®-Mini Barb Connectors General technical specification

• PA (Polyamide 6.6, nylon): Temperature range: -40 to +115 °C Yellowing and reduction of strength depending on temperature and interaction time Physiological function: safe • PP (Polypropylene): Temperature range: -5 to +120 °C Physiological function: safe • PVDF (Polyvinylidene fluoride): Temperature range: -40 to +140 °C, for a short time +150°C Physiological function: safe PVDF is non-toxic and can be used in the food industry without hesitation. According to FDA (USA), the material is physiologically safe. It is as unsuitable as glass for propagation and growing of microorganisms.

Item ​ 29165 29166 29167 29168 29169 29171 29172 29173 29174 29175 29176 29177 29178 29179 29180 29181 29182 29183 29184 29185 29186 29187 29188

​

THOMAFLUID®-Mini Barb Connector - without collar Product specification

• Tubing connection on both sides, for flexible tubing ​

Item ​ 29139 29140 29141 29142 29143 29144 29145 29146 29147 29148 29149 29150

For tubing inside Ø mm

Material

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4

Price

​

​

piece

EURO

PA PA PP PVDF PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white nature nature white black nature nature white black nature nature white black nature nature white black nature nature

15 15 10 5 15 10 5 15 15 10 5 15 15 10 5 15 15 10 5 15 15 10 5

48.00 48.00 39.00 46.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00

Price

THOMAFLUID®-Mini Barb Connector (reduzing) without collar

piece

EURO

Product specification

20 20 15 10 20 20 15 10 20 20 15 10

42.00 42.00 42.00 62.00 42.00 42.00 42.00 61.00 42.00 42.00 42.00 62.00

Colour

Unit

​

​

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white black nature nature white black nature nature

102 THOMAFLUID® II - 2015

For tubing inside Ø mm

• Tubing connection on both sides, for flexible tubing ​

Fittings - Mini Barb Connectors (1.6 - 6.4 mm) Item ​ 29152 29153 29154 29155 29156 29157 29158 29159 29160 29161 29162 29163

One-Piece Connectors - Plastics

For tubing For tubing Material Colour Unit Price inside Ø (A) inside Ø (B) mm mm ​ ​ piece EURO 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white black nature nature white black nature nature

20 20 15 10 20 20 15 10 20 20 15 10

Item ​

42.00 42.00 42.00 61.00 42.00 42.00 42.00 62.00 46.00 42.00 42.00 62.00

29223 29224 29225 29226 29227 29228 29229 29230 29231 29232 29233 29234 29235 29236 29237 29238 29239 29240 29241 29242 29243 29244 29245 29246 29247

THOMAFLUID®-Mini Barb Connector (reduzing) with collar Product specification

• Tubing connection on both sides, for flexible tubing ​

For tubing For tubing Material Colour Unit Price inside Ø (A) inside Ø (B) mm mm ​ ​ piece EURO 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 4 4 4 4 4 4 4 4.8 4.8 4.8

4.8 4.8 4.8 4.8 4 4 4 4 4.8 4.8 4.8 4.8 6.4 6.4 6.4 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4 6.4 6.4

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PA PA PP PVDF PA PA PP PA PA PP

white black nature nature white black nature nature white black nature nature white black nature white black nature nature white black nature white black nature

15 15 10 5 15 15 10 5 15 15 10 5 15 15 10 15 15 10 5 15 15 10 15 15 10

48.00 48.00 39.00 47.00 48.00 48.00 39.00 47.00 48.00 48.00 39.00 47.00 48.00 48.00 39.00 48.00 48.00 40.00 47.00 48.00 48.00 39.00 48.00 48.00 39.00

THOMAFLUID®-Mini Elbow Barb Connector rounded elbow Item ​ 29189 29190 29191 29192 29193 29194 29195 29196 29197 29198 29199 29200 29211 29212 29213 29214 29215 29216 29217 29219 29220 29221 29222

For tubing For tubing Material Colour Unit Price inside Ø (A) inside Ø (B) mm mm ​ ​ piece EURO 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 2.4 2.4 2.4

2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8 3.2 3.2 3.2 4 4 4 4

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PA PA PP PVDF

white black nature nature white black nature nature white black nature nature white black nature nature white black nature white black nature nature

15 15 10 5 15 15 10 5 15 15 10 5 15 15 10 5 15 15 10 15 15 10 5

48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00 39.00 48.00 48.00 39.00 47.00

Product specification

• Tubing connection on both sides, for flexible tubing ​

Item ​ 29261 29262 29263 29264 29265 29266 29267 29268 29269 29270

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2

Price

​

​

piece

EURO

PA PA PP PVDF PA PA PP PVDF PA PA

white black nature nature white black nature nature white black

15 15 10 5 15 15 10 5 15 15

54.00 54.00 49.00 52.00 54.00 54.00 49.00 52.00 57.00 57.00

THOMAFLUID® II - 2015 103

Fittings - Mini Barb Connectors (1.6 - 6.4 mm) Item ​ 29271 29272

One-Piece Connectors - Plastics

For tubing inside Ø mm

Material

Colour

Unit

Price

​

​

piece

EURO

3.2 3.2

PP PVDF

nature nature

10 5

55.00 60.00

Product specification

• Tubing connection at three sides, for flexible tubing Item ​ 29293 29294 29295 29296 29297 29298 29299 29300 29301 29302 29303 29304

THOMAFLUID®-Mini Elbow Barb Connector square elbow Product specification

• Tubing connection on both sides, for flexible tubing ​

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2

Price

​

​

piece

EURO

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white black nature nature white black nature nature

15 15 10 5 15 15 10 5 15 15 10 5

54.00 54.00 49.00 52.00 54.00 54.00 49.00 52.00 57.00 60.00 54.00 60.00

THOMAFLUID®-Mini T-Shaped Barb Connector square elbow Item ​ 29274 29275 29276 29277 29278 29279 29280 29281 29282 29283 29284 29285 29286 29287 29288 29289 29290 29291

For tubing inside Ø mm

Material

Colour

Unit

Price

​

​

piece

EURO

1.6 1.6 1.6 2.4 2.4 2.4 3.2 3.2 3.2 4 4 4 4.8 4.8 4.8 6.4 6.4 6.4

PA PA PP PA PA PP PA PA PP PA PA PP PA PA PP PA PA PP

white black nature white black nature white black nature white black nature white black nature white black nature

10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5

44.00 44.00 60.00 44.00 45.00 60.00 50.00 49.00 64.00 52.00 52.00 67.00 59.00 59.00 39.00 34.00 34.00 49.00

THOMAFLUID®-Mini T-Shaped Barb Connector rounded elbow ​

104 THOMAFLUID® II - 2015

Product specification

• Tubing connection at three sides, for flexible tubing ​

Item ​ 29306 29307 29308 29309 29310 29311 29312 29313 29314 29315 29316 29317 29318 29319 29320 29321 29322 29323

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 2.4 2.4 2.4 3.2 3.2 3.2 4 4 4 4.8 4.8 4.8 6.4 6.4 6.4

Price

​

​

piece

EURO

PA PA PP PA PA PP PA PA PP PA PA PP PA PA PP PA PA PP

white black nature white black nature white black nature white black nature white black nature white black nature

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5

44.00 44.00 59.00 44.00 44.00 59.00 49.00 49.00 64.00 52.00 52.00 67.00 59.00 59.00 77.00 36.00 36.00 49.00

Fittings - Mini Barb Connectors (1.6 - 6.4 mm)

One-Piece Connectors - Plastics

THOMAFLUID®-Mini T-Shaped Barb Connector (reduzing) - symmetrical

Product specification

• Tubing connection at three sides, for flexible tubing Item

Product specification

• Tubing connection at three sides, for flexible tubing ​

​ 29346 29348 29354 29355 29356 29358 29359 29360 29361 Item ​ 293250 293251 293252 293253 29325 29326 29327 29328 29329 29330 29331 29333 29334 29335 29336 29337 29338 29339 29340 29341 29342 29343 29344

For tubing For tubing Material inside Ø inside Ø (A) (B) mm mm ​ 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 1.6 1.6 1.6 3.2 3.2 3.2 3.2 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4

PA PA PP PVDF PA PA PP PVDF PA PA PP PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

Colour

Unit

Price

​

piece

EURO

white black nature nature white black nature nature white black nature white black nature nature white black nature nature white black nature nature

10 10 10 3 10 10 10 3 10 10 10 10 10 10 3 10 10 10 3 10 10 10 3

49.00 49.00 64.00 45.00 49.00 49.00 64.00 45.00 49.00 49.00 70.00 49.00 49.00 64.00 45.00 49.00 50.00 64.00 45.00 50.00 50.00 70.00 45.00

For tubing For tubing Material inside Ø inside Ø (A) (B) mm mm ​ 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4

2.4 2.4 3.2 3.2 3.2 3.2 3.2 3.2 3.2

PA PP PA PA PP PA PA PP PVDF

Colour

Unit

Price

​

piece

EURO

white nature white black nature white black nature nature

10 10 10 10 10 10 10 10 3

49.00 64.00 49.00 50.00 70.00 50.00 50.00 70.00 45.00

THOMAFLUID®-Mini Y-Shaped Barb Connector Product specification

• Tubing connection at three sides, for flexible tubing ​

Item ​ 29249 29250 29251 29252 29253 29254 29255 29256 29257 29258 29259 29260

THOMAFLUID®-Mini T-Shaped Barb Connector (reduzing) - asymmetrical

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2

Price

​

​

piece

EURO

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white black nature nature white black nature nature

15 15 10 5 15 15 10 5 15 15 10 5

54.00 54.00 49.00 52.00 54.00 54.00 49.00 52.00 57.00 57.00 52.00 57.00

​

THOMAFLUID®-Mini Screw-in Connecor with male thread UNF 10-32 - short Product specification

• Tubing connection on one side, short UNF 10-32 thread on the other side, for flexible tubing ​

THOMAFLUID® II - 2015 105

Fittings - Mini Barb Connectors (1.6 - 6.4 mm)

One-Piece Connectors - Plastics Item ​

Item ​ 28950 28951 28952 28953 28954 28955 28956 28957 28958 28959 28960 28961 28962 28963 28964 28965 28966 28967 28968 28969 28970 28971 28973 28974 28975 28977

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 3.2 3.2 3.2 4 4 4 4 4

​

​

piece

EURO

PA PA PA PA PA PP PVDF PA PA PA PA PA PP PVDF PA PA PA PA PA PP PVDF PA PA PA PA PVDF

white black red green blue nature nature white black red green blue nature nature white black red green blue nature nature white red green blue nature

20 20 20 20 20 15 10 20 20 20 20 20 15 10 20 20 20 20 20 15 10 20 20 20 20 10

36.00 36.00 36.00 36.00 36.00 36.00 52.00 36.00 36.00 36.00 36.00 36.00 36.00 52.00 36.00 36.00 36.00 36.00 36.00 36.00 52.00 36.00 36.00 36.00 36.00 52.00

28978 28979 28981 28982 28983 28984 28985 28986 28987 28988 28989 28990 28991 28992 28993 28994 28997 28998 28999 29001 29002 29003 29004 29005

Price

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 3.2 4 4 4 4 4 4

Price

​

​

piece

EURO

PA PA PA PA PP PVDF PA PA PA PA PA PP PVDF PA PA PA PP PVDF PA PA PA PA PP PVDF

white black green blue nature nature white black red green blue nature nature white black red nature nature white red green blue nature nature

20 20 20 20 15 10 20 20 20 20 20 15 10 20 20 20 15 10 20 20 20 20 15 10

36.00 36.00 36.00 36.00 36.00 52.00 36.00 36.00 36.00 36.00 36.00 39.00 52.00 36.00 36.00 36.00 39.00 52.00 36.00 36.00 36.00 36.00 36.00 52.00

THOMAFLUID®-Mini Screw-in Connecor with male thread UNF 1/4“-28 Product specification

• Tubing connection on one side, UNF 1/4”-28 Gg external thread on the other side, for flexible tubing ​

THOMAFLUID®-Mini Screw-in Connecor with male thread UNF 10-32 - long Product specification

• Tubing connection on one side, long UNF 10-32 external thread on the other side, for flexible tubing

Item

​

​ 29006 29007 29008 29009 29010 29011 29012 29013 29014 29015

106 THOMAFLUID® II - 2015

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2

Price

​

​

piece

EURO

PA PA PP PVDF PA PA PP PVDF PA PA

white black nature nature white black nature nature white black

15 15 10 5 15 15 10 5 15 15

48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00

Fittings - Mini Barb Connectors (1.6 - 6.4 mm) Item ​ 29016 29017 29018 29019 29020 29021 29022 29023 29024 29025

For tubing inside Ø mm

Material

3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8

One-Piece Connectors - Plastics

Colour

Unit

Price

​

​

piece

EURO

PP PVDF PA PA PP PVDF PA PA PP PVDF

nature nature white black nature nature white black nature nature

10 5 15 15 10 5 15 15 10 5

39.00 46.00 48.00 48.00 39.00 46.00 48.00 48.00 39.00 46.00

THOMAFLUID®-Mini Screw-in Connecor with male thread M6x1 Product specification

• Tubing connection on one side, M6x1-external thread on the other side, for flexible tubing ​

THOMAFLUID®-Mini Screw-in Connecor with male thread NPT 1/8“

Item

Product specification

• Tubing connection on one side, NPT 1/8“ external thread on the other side, for flexible tubing

​ 29029 29030 29033 29034 29035 29036 29037 29038 29041 29042 29044 29045

​

Item ​ 29048 29049 29050 29051 29052 29053 29054 29055 29056 29057 29058 29059 29060 29061 29062 29063 29064 29065 29066 29067 29068 29069 29070 29071

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4 4 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4

Price

​

​

piece

EURO

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white black nature nature white black nature nature white black nature nature white black nature nature white black nature nature

15 15 10 5 15 15 10 5 15 15 10 5 15 15 10 5 15 15 10 5 15 15 10 5

54.00 54.00 50.00 52.00 54.00 54.00 50.00 52.00 54.00 54.00 52.00 54.00 60.00 57.00 52.00 57.00 69.00 66.00 59.00 65.00 66.00 66.00 59.00 65.00

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 2.4 2.4 3.2 3.2 3.2 3.2 4 4 4.8 4.8

Price

​

​

piece

EURO

PP PVDF PP PVDF PA PA PP PVDF PP PVDF PA PP

nature nature nature nature white black nature nature nature nature black nature

10 5 10 5 15 15 10 5 10 5 15 10

39.00 46.00 39.00 46.00 48.00 48.00 39.00 46.00 39.00 46.00 48.00 39.00

THOMAFLUID®-Mini Elbow Screw-in Connecor with male thread UNF 10-32 - short Product specification

• Tubing connection on one side, short UNF 10-32 external thread on the other side, for flexible tubing ​

Item ​ 29086 29087 29088 29089 29090

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4

Price

​

​

piece

EURO

PA PA PP PVDF PA

white black nature nature white

15 15 10 5 15

54.00 54.00 49.00 52.00 54.00

THOMAFLUID® II - 2015 107

Fittings - Mini Barb Connectors (1.6 - 6.4 mm) Item ​ 29091 29092 29093 29094 29095 29096 29097

One-Piece Connectors - Plastics

For tubing inside Ø mm

Material

Colour

Unit

Price

​

​

piece

EURO

2.4 2.4 2.4 3.2 3.2 3.2 3.2

PA PP PVDF PA PA PP PVDF

black nature nature white black nature nature

15 10 5 15 15 10 5

54.00 49.00 52.00 60.00 60.00 54.00 59.00

THOMAFLUID®-Mini Elbow Screw-in Connecor with male thread UNF 10-32 - long Product specification

• Tubing connection on one side, long UNF 10-32 external thread on the other side, for flexible tubing ​

Product specification

• Tubing connection on one side, NPT 1/8“ external thread on the other side, for flexible tubing Item ​ 29099 29100 29101 29102 29103 29104

For tubing inside Ø mm

Material

Colour

Unit

4.8 4.8 4.8 6.4 6.4 6.4

Price

​

​

piece

EURO

PA PA PP PA PA PP

white black nature white black nature

5 5 5 5 5 5

40.00 39.00 52.00 44.00 45.00 59.00

THOMAFLUID®-Mini T-Shaped Screw-in Connector with male thread UNF 10-32 - short Product specification

• Tubing connection on two sides, short UNF 10-32 external thread on the third side, for flexible tubing ​

Item ​ 29073 29074 29075 29076 29077 29078 29079 29080 29081 29082 29083 29084

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2

Price

​

​

piece

EURO

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white black nature nature white black nature nature

15 15 10 5 15 15 10 5 15 15 10 5

54.00 54.00 49.00 55.00 54.00 54.00 49.00 52.00 60.00 60.00 54.00 59.00

THOMAFLUID®-Mini Elbow Screw-in Connecor with male thread NPT 1/8“ ​

108 THOMAFLUID® II - 2015

Item ​ 29106 29107 29108 29109 29110 29112 29114 29115 29116 29117

For tubing inside Ø mm

Material

Colour

Unit

1.6 1.6 1.6 1.6 2.4 2.4 3.2 3.2 3.2 3.2

Price

​

​

piece

EURO

PA PA PP PVDF PA PP PA PA PP PVDF

white black nature nature white nature white black nature nature

10 10 10 5 10 10 10 10 10 3

44.00 44.00 59.00 65.00 44.00 59.00 49.00 49.00 64.00 45.00

THOMAFLUID®-Mini T-Shaped Screw-in Connector with male thread UNF 10-32 - long

Fittings - Mini Barb Connectors (1.6 - 6.4 mm)

One-Piece Connectors - Plastics

Product specification

Tubing Olive Connectors (I-Ø: 3 - 25 mm)

• Tubing connection on two sides, long UNF 10-32 external thread on the third side, for flexible tubing ​

Item ​ 29119 29120 29121 29122 29123 29124 29125 29126 29127 29128 29129 29130

For tubing inside Ø mm

Material

Colour

Unit

Price

​

​

piece

EURO

1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.2 3.2 3.2 3.2

PA PA PP PVDF PA PA PP PVDF PA PA PP PVDF

white black nature nature white black nature nature white black nature nature

10 10 10 5 10 10 10 5 10 10 10 3

44.00 44.00 59.00 65.00 44.00 44.00 59.00 64.00 49.00 49.00 64.00 45.00

THOMAFLUID®-Straight Barb Union made of POM with hex collar ​

Item ​

For tubing inside Ø mm

Nominal width mm

Unit piece

Price EURO

4 5 6 8 10 12 13 14 16 19

2.7 3 4 5.6 7 8.6 8.6 10 12 15

10 10 10 10 8 8 8 4 4 4

16.00 16.00 21.00 21.00 28.00 24.00 28.00 24.00 26.00 32.00

94175 94176 94177 94178 26380 26381 26382 26383 26384 26385

THOMAFLUID®-Mini T-Shaped Screw-in Connector with male thread NPT 1/8“ Product specification

• Tubing connection on two sides, NPT 1/8” external thread on the third side, for flexible tubing ​

THOMAFLUID®-Straight Barb Union (reducing) made of POM ​

Item ​ 29132 29133 29134 29135 29136 29137

For tubing inside Ø mm

Material

Colour

Unit

4.8 4.8 4.8 6.4 6.4 6.4

Price

​

​

piece

EURO

PA PA PP PA PA PP

white black nature white black nature

5 5 5 5 5 5

40.00 40.00 55.00 39.00 40.00 52.00

Item ​ 94180 94181 94182 26386 26387 26388 94909

For tubing For tubing inside Ø (A) inside Ø (B) mm mm 6 8 8 10 10 12 12

4 4 6 6 8 8 10

Nominal width mm

Unit

Price

piece

EURO

2.7 2.7 4 4 5.6 5.6 7

10 10 10 10 10 10 10

21.00 29.00 34.00 46.00 46.00 46.00 46.00

THOMAFLUID® II - 2015 109

Fittings - Tubing Olive Connectors (3 - 25 mm)

One-Piece Connectors - Plastics

THOMAFLUID®-T-Shaped Barb Union made of POM

THOMAFLUID®-Y-Shaped Barb Union made of POM

Item ​

​

​

For tubing inside Ø mm

Nominal width mm

Unit piece

Price EURO

Item ​

4 5 6 8 10 12 13 14 15 16 19

2.5 3 4 5.6 7 8.6 9 10 11 12 15

10 10 10 10 8 8 8 8 4 4 4

21.00 23.00 29.00 31.00 40.00 44.00 52.00 52.00 40.00 42.00 70.00

94190 94191 94192 94193 26410 26411 26412 26413 26414 26415

26389 26390 26391 26392 26393 26394 26395 26396 26397 26398 26399

For tubing inside Ø mm

Nominal width mm

Unit piece

Price EURO

4 5 6 8 10 12 13 14 16 19

2.5 3 4 5.6 7 8.6 9 10 12 15

10 10 10 10 8 8 8 4 4 4

21.00 26.00 44.00 44.00 44.00 52.00 56.00 32.00 42.00 44.00

THOMAFLUID®-Y-Shaped Reducing Connector made of POM

THOMAFLUID®-T-Shaped Reducing Connector made of POM

​

​

Item Item ​ 26400 26401 26402 26403 26404 26405 26406 26407 26408 26409

For tubing For tubing Nominal Nominal Unit inside Ø inside Ø width width (A) (B) (A) (B) mm mm mm mm piece 4 6 8 8 10 10 12 12 8 18

6 4 4 6 6 8 8 10 12 15

110 THOMAFLUID® II - 2015

2.5 4 5.6 5.6 7 7 8.6 8.6 5.6 14

4 2.5 2.5 4 4 5.6 5.6 7 8.6 11

10 10 10 10 8 8 4 4 4 4

Price ​ EURO 34.00 34.00 36.00 36.00 36.00 44.00 34.00 44.00 44.00 54.00

26416 26417

For tubing For tubing Nominal Nominal Unit inside Ø inside Ø width width (A) (B) (A) (B) mm mm mm mm piece 4 6

6 8

2.7 4

4 5.6

10 10

THOMAFLUID®-Cross Barb Union made of POM ​

Price EURO 29.00 39.00

Fittings - Tubing Olive Connectors (3 - 25 mm) Item ​ 26418 26419 26420

One-Piece Connectors - Plastics

For tubing inside Ø mm

Nominal width mm

Unit piece

Price EURO

4 5 6

2.9 3 4

10 10 10

31.00 39.00 44.00

THOMAFLUID®-Magic Box „Laboratory“ made of POM - 40 pieces Product specification

• Connecting pieces and adapters made of POM. Set contains: 20 connectors à 5 pieces each: item 94175-78 12 adapters à 4 pieces each: item 94180-82 8 Y-connectors à 2 pieces each: item 94190-93

THOMAFLUID®-Magic Box „Plant“ made of POM 71 pieces Product specification

• Connecting pieces and adapters made of POM. Set contains: 20 connectors à 2 pieces each: item 94175-78 / 26380-85 8 adapters à 2 pieces each: item 26386-88 / 94909 12 T-connectors à 2 pieces each: item 26394-99 12 T-adapters à 2 pieces each: item 26404-09 12 Y-connectors à 2 pieces each: item 26410-15 4 Y-adapters à 2 pieces each: item 26416-1 3 Cross connectors à 1 piece each: item 26418-20 ​

​

Item ​ 942011 Item ​ 94199

Unit piece

Price EURO

1

75.00

Unit piece

Price EURO

1

141.00

THOMAFLUID®-Straight Barb Union made of POM Bulkhead Technical specification

THOMAFLUID®-Magic Box „Pilot Plant“ made of POM - 63 pieces

• Material: POM (polyoxymethylene) • Outfit: with counter nut (nickel-plated brass) for control panel mounting • Temperature range: -15 to +80 °C • Bulkhead thread diameter: 12.7 mm • Bulkhead thread length: approx. 10 mm

Product specification

• Connecting pieces and adapters made of POM. Set contains: 12 connectors à 2 pieces each: item 26380-85 8 adapters à 2 pieces each: item 26386-88 / 94909 12 T-connectors à 2 pieces each: item 26389-94 12 T-adapters à 2 pieces each: item 26400-05 12 Y-connectors à 2 pieces each: item 26410-15 4 Y-adapters à 2 pieces each: item 26416-1 3 Cross connectors à 1 piece each: item 26418-20

​

​

Item ​

Item ​ 942001

Unit piece

Price EURO

1

126.00

13951 13952 13953

For tubing inside Ø mm

Unit piece

Price EURO

4 6.4 9.5

3 3 3

33.00 33.00 33.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of POM Product specification

• Male G-thread on one side, hose nozzle on the other side ​

THOMAFLUID® II - 2015 111

Fittings - Tubing Olive Connectors (3 - 25 mm)

One-Piece Connectors - Plastics Item ​

Item ​ 14692 14693 14694 14695 14696

For External L tubing thread inside Ø mm ​ mm 4 6 6 9 13

G 1/4“ G 1/4“ G 3/8“ G 3/8“ G 3/8“

29 29 39 39 42

l1

l2

Unit

Price

mm

mm

piece

EURO

8 8 9 9 9

17 17 22 22 25

5 5 5 5 5

23.00 26.00 29.00 34.00 36.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of POM - Bulkhead Product specification

• Male G-thread on one side; hose nozzle on the other side ​

Item ​ 14701 14702

For External L tubing thread inside Ø mm ​ mm 4 6

G 1/4“ G 1/4“

43 43

l1

l2

Unit

mm

mm

piece

EURO

7 8

8 8

5 5

34.00 36.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of PA ​

112 THOMAFLUID® II - 2015

Price

26421 26422 26423 26424 26425 26426 26427 26428 26429 26430 26431 26432 26433 26434 26435 26436 26437 26438 26439 26440 26441 26442 26443 26444 26445 26446 26447 26448 26449 26450 26451 26452 26453 26454 26455 26456 26457 26458 26459 26460 26461 26462 26463 26464 26465 26466 26467 26468 26469 26470

For External Nominal tubing thread width inside Ø mm ​ mm 4 4 4 4 4 4 4 4 4 5 5 5 5 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 12 12 12 12 12 12 12 14 14 14 14 14 14

M8 x 1.25 M8 x 1 M10 x 1 M12 x 1.5 M14 x 1.5 R 1/8“ R 1/4“ NPT 1/8“ NPT 1/4“ M12 x 1.5 M14 x 1.5 R 1/4“ NPT 1/4“ M10 x 1 M12 x 1.5 M14 x 1.5 R 1/8“ R 1/4“ NPT 1/8“ NPT 1/4“ M10 x 1 M12 x 1.5 M14 x 1.5 M18 x 1.5 M22 x 1.5 M26 x 1.5 R 1/4“ R 3/8“ R 1/2“ NPT 1/4“ M12 x 1.5 M14 x 1.5 M16 x 1.5 R 1/4“ R 3/8“ NPT 1/4“ NPT 3/8“ M16 x 1.5 M18 x 1.5 M22 x 1.5 M26 x 1.5 R 3/8“ R 1/2“ NPT 3/8“ M18 x 1.5 M20 x 1.5 M22 x 1.5 R 1/2“ R 3/8“ NPT 1/2“

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 4 4 4 4 4 4 4 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 7 7 7 7 7 7 7 8.6 8.6 8.6 8.6 8.6 8.6 8.6 10 10 10 10 10 10

Length

Unit

Price

mm

piece

EURO

27 27 27 32 32 27 32 29 35 36 36 36 39 33 38 37 33 38 35 41 38 41 41 49 49 49 41 41 49 44 44 44 44 44 44 47 47 46 54 54 54 46 54 48 56 56 56 56 56 56

10 10 10 10 10 10 10 10 10 10 10 6 6 10 10 10 10 10 10 10 10 10 10 8 8 8 10 8 8 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8

26.00 26.00 26.00 50.00 46.00 31.00 31.00 31.00 31.00 41.00 41.00 42.00 42.00 43.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 46.00 48.00 48.00 48.00 49.00 44.00 44.00 44.00 49.00 49.00 49.00 41.00 41.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 48.00

Thomafluid® II

To provide you with the best possible information about the application areas of our products, we take great care to give you a detailed, precise and technically up-to-date description.

However, please note, that we cannot be held liable for any errors. Any values given are recommendations only that have been tested under normal conditions.

We suggest, that you test the product under the appropriate conditions determined by your specific use of the application.

If you need any help, we will gladly share our experiences with you to give you further assistance.

Our product range is clearly classified into four product groups and presented in detail in other handbooks.

THOMAFLUID® I-V Hoses, dosing and connection technology THOMAPLAST® I-V Laboratory plastics, semi-finished products, closure and fastening elements and gaskets THOMAPOR® Separation technology THOMADRIVE® Drive technology Examples of the extremely wide range of products are employed in virtually every sector of industry.

The spectrum extends from hoses and fluids technology through elastomers and semi-finished products, plastics and bonding technology to laboratories and filtration technology.

The prices in this handbook are valid for the currency area of the „European Union“ !

No minimum order.

Subject to technical and price change. © 2015 Copyright by Reichelt Chemietechnik GmbH + Co.

Request our complete programme free of charge and without obligation or visit our homepage at www.rct-online.de

Reichelt Chemietechnik GmbH + Co.

EnglerstraĂ&#x;e 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de

Shopping per mouseclick www.rct-online.de