Reichelt Chemietechnik GmbH + Co.
ThomaPLASTÂŽ I Laboratory Plastics Containers Laboratory Instruments Laboratory Stoppers and Caps Metering Facilities Stirring and Mixing Semi-finished Products
Filtration Dialysis Membranes Filter Housings Filter Disks and Filter Candles Sintered Elements Filter Cloths
Reichelt Chemietechnik ’15 Shopping per mouseclick www.rct-online.de
Reichelt Chemietechnik GmbH + Co.
EnglerstraĂ&#x;e 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de
Heiliggeistkirche in Heidelberg
Content: Laboratory Plastics
page
Containers • Bottles, carboys and accessories made of FEP, HDPE, LDPE, PC, PFA, PP, PS, PTFE, PVC bottles: dropping, wash, scintillation, narrow-neck, wide-mouth bottles: storage, cell culture; carboys, jerrycans accessories: litre scale, closures, wall drying rack, tank connection
3 - 13
• Tubes, jars and boxes made of HDPE, LDPE, PE, PFA, PP, PS, TPX jars: shipment, specimen, packaging, storage, weight sample vial, conway diffsion cell, transfer reaction vessel with cover, screw closure
13 - 20
• Dishes and crucibles made of PFA, PP, PS, PTFE dishes: petri, weighing, evaporating, crystallization, crucibles partially with spout
20 - 22
• Measuring beakers and measuring flasks made of ECTFE, PFA, PMP, PP, PTFE, SAN, TPX beakers: standard, with handle, scoop, tapered measuring; cylinders, flasks (Erlenmeyer) partially with closure
22 - 27
• Funnels and accessories made of FEP, PP, PTFE, TPX, aluminium funnels: standard, high-speed, powder, separatory, thistle tube accessories: strainer, holder
27 - 29
• Test tubes, centrifuge tubes made of PP, PS, PTFE partially with rim, closure, label, stopper
29 - 30
• Test tube racks, desiccators, accessories made of LDPE, PC, PP, PVC
30 - 32
• Cases, trays, bowls, pails and DEWAR-vessels made of LDPE, PFA, PP, PVC, XLPE
32 - 36
Laboratory Instruments • Scoops, spoons, spatulas and tweezers made of HDPE, PFA, PP, POM, PTFE, styrene, forged steel, chromium nickel steel
36 - 38
• Pestles and mortars made of melamine
38
• Precision knives and scalpels made of aluminium, stainless steel, steel
39 - 40
Metering Facilities and Metering Devices
40 - 42
• Pipettes, burettes and acessories made of HDPE, NR, PE, PP dropping pipette, pipette suction bulb, universal bulb pipette, squeeze bulb pipette filler
Stirring and Mixing • Stirrers and stirring devices made of PTFE, PP stirring: bars, spatulas; magnetic: stirrers, stirring bars, retrievers
42 - 44
Drying Tubes, Gas Sampling Bulbs and Accessories made of LDPE, PFA, PTFE, PP
44 - 45
Laboratory Stoppers and Caps • Laboratory stoppers made of FPM, NBR, NR, silicone • Laboratory caps made of silicone, aluminium
45 - 50 50 - 51
THOMAPLAST® I - 2015
Content: Laboratory Plastics
page
Laboratory Semifinished Products and Aids • Glass fibre wool, boiling stones, balls, powder, blowing bulbs, markers
51 - 53
Protection • Mats, bench liners, antislip Sheetings and Lead Weight Rings
53 - 54
Laboratory Equipment and Utensils • cuvette washer, service case, clamping vice, holder, sieve set
Content: Separation Technology – Filtration
54 - 55
page
Dialysing Tubing, Dialysing Chamber, Dialysing Cylinder
56 - 61
Anion-Exchange Membranes and Cation-Exchange Membranes
61 - 63
Hollow Fibres
63 - 64
Borosilicate Glass Filter Disks
64 - 66
Sintered Plates, Sintered Rods and Sintered Pipes
66 - 75
Round Filters and Membranes
75 - 83
Screen Cloths, Filter Cloths, Fleeces and Mats
84 - 93
Frits, Eluent Filters and Immersion Filters
93 - 96
Prefilters and Filter Holders
96 - 103
Filter Modules
103 - 104
Filter Housings and Filter Elements
104 - 111
Fine Filter Systems made of PVDF and PTFE
111 - 112
THOMAPLAST® I - 2015
Laboratory Plastics - Bottles, Carboys and Accessories
Containers Item
Containers Bottles, Carboys and Accessories Laboratory Plastics
10889 10890 10891 10892 10893
THOMAPLAST®-Dropping Bottle made of LDPE sterilizable Product specification
• Dropping bottle made of flexible, translucent LDPE with wide mouth. • Dropping bottle guarantees accurate, reliable, defined, and repeatable metering of aqueous fluids; represents an ideal alternative to conventional pipettes or other metering systems. • Dropping bottles are fitted with coloured cups for easier identification. • Drop size: approx. 40 µl. • Meets the requirements of the USP class VI and the U.S. FDA for food contact. • Sterilization with ionizing radiation possible.
Volume ml
Outside Ø mm
External thread
Unit
Price
piece
EURO
50 100 250 500 1,000
37 43 58 74 92
GL18 GL18 GL25 GL25 GL32
12 12 6 6 3
42.00 48.00 39.00 48.00 33.00
THOMAPLAST®-Dropping and Wash Bottle made of LDPE Product specification
• Transparent, natural-coloured, well standing wash bottle made of LDPE with integrated spray delivery tube, narrow-mouth and thread according to DIN 168. • Prominent product advantage: no contamination of the delivery tube during refilling.
Item
Volume
ml
Outside Ø mm
12002 12008 12012 12014 12015 12017 12018 12019
4 8 8 15 15 15 15 15
20 20 20 25 25 25 25 25
Height mm
Colour code
Unit
Price
piece
EURO
Item
54 65 65 75 75 75 75 75
white white red white yellow green red blue
5 5 5 5 5 5 5 5
35.00 40.00 40.00 45.00 45.00 45.00 45.00 45.00
10923 10924
Volume
Height
Unit
ml
Ø neck inside mm
Price
mm
piece
EURO
250 500
24 24
143 181
5 5
54.00 64.00
THOMAPLAST®-Scintillation Bottle made of HDPE Product specification
• Stable design made of HDPE with leakproof screw closure.
THOMAPLAST -Dropping Bottle made of LDPE long tip ®
Product specification
• Round, transparent bottle made of LDPE with drop dispenser and closure cap, thread according to DIN 168.
Item 61070
Volume Outside Ø Ø neck ml mm mm 20
27
16
Height mm
Unit piece
Price EURO
60
50
40.00
THOMAPLAST® I - 2015 3
Laboratory Plastics - Bottles, Carboys and Accessories THOMAPLAST®-Safety Wash Bottle made of LDPE with label Product specification
• Bottles from PE-LD or PP, spray tube from PP. • More safety due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: • Substance name in German, English, French and Spanish • Chemical formula, CAS No., hazard pictogram, signal word • Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code • Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the bright red VENT-CAP screw cap, which prevents almost all static overpressure.
Containers
Product specification
• Non-rigid, cylindrical, well standing wash bottle made of plasticized LDPE in four bright colours and with tight closure system, as closure cap and outlet pipe are made of one piece. Colours are food-suited and cadmium-free. Item Volume Outside Height External Colour Unit Price Ø thread ml mm mm piece EURO 10925 10926 10927 10928 10929 10930 10931 10932
250 250 250 250 500 500 500 500
58 58 58 58 74 74 74 74
135 135 135 135 180 180 180 180
GL25 GL25 GL25 GL25 GL25 GL25 GL25 GL25
red blue yellow green red blue yellow green
5 5 5 5 5 5 5 5
46.00 46.00 46.00 46.00 54.00 54.00 54.00 54.00
THOMAPLAST®-Wash Bottle made of PFA Product specification
• Narrow-neck bottles made of highly transparent perfluoroalkoxy (PFA), well suited for all organic and inorganic solutions, even at low and high temperatures, screw cap made of ETFE, dispensing tube made of FEP
Item Volume 47799 47800 47801 47802 47803 47804 47805 47806 47807 47808 47809 47810 47811 47812 47813 47814 47815 47816
Imprint
ml
250 250 250 250 250 250 500 500 500 500 500 500 1,000 1,000 1,000 1,000 1,000 1,000
DEST. WASSER ACETON METHANOL ISOPROPANOL ETHYLACETAT ETHANOL DEST. WASSER ACETON METHANOL ISOPROPANOL ETHYLACETAT ETHANOL DEST. WASSER ACETON METHANOL ISOPROPANOL ETHYLACETAT ETHANOL
O-Ø Height External Unit Price thread mm mm piece EURO 58 58 58 58 58 58 74 74 74 74 74 74 92 92 92 92 92 92
135 135 135 135 135 135 180 180 180 180 180 180 221 221 221 221 221 221
GL25 GL25 GL25 GL25 GL25 GL25 GL25 GL25 GL25 GL25 GL25 GL25 GL32 GL32 GL32 GL32 GL32 GL32
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
36.00 36.00 36.00 36.00 36.00 36.00 42.00 42.00 42.00 42.00 42.00 42.00 51.00 51.00 51.00 51.00 51.00 51.00
Item 286681 286691 286701
THOMAPLAST®-Wash Bottle made of LDPE - coloured
4 THOMAPLAST® I - 2015
Height mm
Outside Ø mm
External thread
ml 250 500 1,000
Unit
Price
piece
EURO
155 185 230
60 75 95
GL25 GL25 GL32
1 1 1
144.00 185.00 225.00
THOMAPLAST®-Narrow-Neck Bottle made of LDPE Product specification
• LDPE, translucent, natural-coloured, with tight screw cap
Volume
Laboratory Plastics - Bottles, Carboys and Accessories Item 62051 62052 62053 62054 62055 62056 62057 62058 62059 62060 62061 62062
Volume Outside Ø Ø neck ml mm mm 10 20 30 50 100 200 250 500 1,000 2,000 3,000 5,000
26 32 34 37 47 58 61 75 98 120 138 162
9 9 9 13 13 13 19 19 22 22 24 31
Containers
Height mm
Unit piece
Price EURO
Item
48 58 64 86 106 134 141 178 225 265 300 355
10 10 10 10 10 5 5 5 5 3 2 1
21.00 25.00 27.00 30.00 33.00 23.00 27.00 33.00 43.00 48.00 45.00 36.00
28669 28670 28671 28672
Volume ml
Height mm
Outside Ø mm
Unit piece
Price EURO
100 250 500 1,000
120 155 185 230
45 60 75 95
1 1 1 1
128.00 144.00 172.00 223.00
THOMAPLAST®-Narrow-Neck High Shoulder Bottle made of PP Product specification
• Translucent, sterilizable (up to +130 °C) bottle made of polypropylene with narrow neck, absolutely tight screw closure and a great degree of chemical resistance, robust polypropylene design.
THOMAPLAST®-Narrow-Neck Bottle made of PP Product specification
• Translucent, transparent, sterilizable (up to +130 °C) bottle made of polypropylene with narrow neck, absolutely tight screw closure and a great degree of chemical resistance.
Item
Item 10826 40129 40130 40131 40132 10827
Volume Outside Ø Ø neck ml mm mm 50 100 250 500 1,000 2,000
40 47 61 75 98 120
13 13 19 19 21 23
Height mm
Unit piece
Price EURO
90 106 141 178 225 270
10 10 5 3 3 2
49.00 54.00 44.00 42.00 51.00 51.00
THOMAPLAST®-Narrow-Neck Bottle made of PFA Product specification
• A bottle made of highly transparent perfluoroalkoxy (PFA) for contamination-free working with pure and aggressive media even at temperatures of -200 to +200 °C, with absolutely leakproof screw closure made of ETFE.
10797 10798 10799 10800 10801 10802 10803 10804 10805 10806 10807
Volume Outside Ø Ø neck ml mm mm 4 8 15 15 30 60 125 250 500 1,000 2,000
16 25 24 25 34 39 50 61 73 90 120
8 13 9 13 14 14 18 18 22 27 40
Height mm
Unit piece
Price EURO
42 45 73 58 60 85 100 130 170 215 235
10 10 10 10 10 10 10 5 5 3 1
40.00 40.00 60.00 43.00 46.00 49.00 51.00 41.00 67.00 57.00 34.00
THOMAPLAST®-Narrow-Neck High Shoulder Bottle made of FEP Product specification
• Transparent narrow-mouth bottle made of FEP supplied with hermetically sealing screw cap made of ETFE. Temperature resistance from -105 to +150 °C, very good chemical resistance.
THOMAPLAST® I - 2015 5
Laboratory Plastics - Bottles, Carboys and Accessories Item 60958 60959 60960 60961 60962 60963 60964
Volume ml
Ø neck mm
Height mm
Unit piece
Price EURO
30 60 125 250 500 1,000 2,000
15 15 18 18 20 20 35
75 80 115 135 170 195 240
1 1 1 1 1 1 1
54.00 62.00 75.00 113.00 128.00 167.00 294.00
THOMAPLAST®-Narrow-Neck High Shoulder Bottle made of LDPE - square
Containers Item 10819 10820 10821 10822 10823
Volume
Height
ml
Outside Ø mm
500 1,000 2,000 5,000 10,000
87 108 131 178 222
165 202 245 315 394
mm
External Unit thread piece GL25 GL32 GL32 GL45 GL63
5 5 2 1 1
Price EURO 47.00 67.00 82.00 36.00 49.00
THOMAPLAST®-Narrow-Neck Storage Bottle made of PC - square Product specification
• Glass-clear, graduated storage bottles made of breakproof polycarbonate with tightly closing screw cap made of PP. The square-prismatic shape allows room-saving placing. • Free of leachable components and biocompatible. • Temperature loadable between -135 °C and +135 °C, sterilizable and particularly suited for freezer storage. • Not suitable for solvents, strong acids, and alkaline solutions.
Product specification
• Square, transparent bottle made of LDPE with closure cap, thread according to DIN 168.
Item 10884 10886 10887 10888
Volume External Dimensions Height thread ml mm mm 100 250 500 1,000
GL25 GL28 GL28 GL32
43 x 43 80 x 80 90 x 90 80 x 80
76 80 106 187
Unit
Price
piece
EURO
12 12 6 3
60.00 72.00 45.00 30.00
THOMAPLAST®-Narrow-Neck Conical Shoulder Bottle made of PP - with screw closure Product specification
• Transparent conical shoulder bottle with narrow neck and leakproof screw closure, specified according to DIN 12036 and 12039 resp., made of polypropylene.
Item
Volume
ml
Outside Ø mm
10817 10818
100 250
52 70
6 THOMAPLAST® I - 2015
Height
100 132
mm
External Unit thread piece GL18 GL25
10 10
Price EURO 40.00 53.00
Item
Volume Dimensions Ø neck ml mm mm
48014 30 48015 60 48016 125 48017 250 48018 500 48019 1,000
38 x 38 40 x 40 52 x 52 60 x 60 75 x 75 90 x 90
14 18 28 28 28 28
Height mm
Unit piece
Price EURO
62 82 105 145 175 220
3 3 3 3 3 2
30.00 36.00 36.00 54.00 69.00 71.00
THOMAPLAST®-Narrow-Neck Storage Bottle made of PP - square
Laboratory Plastics - Bottles, Carboys and Accessories Product specification
• Transparent, graduated storage bottles of high chemical resistance, made of shatterproof polypropylene (PP), with tightly closing screw cap made of the same material. The square-prismatic shape allows room-saving placement. • Free of leachable components and biocompatible. • Temperature-loadable from -140 to +130 °C. • Sterilizable and particularly suitable for deep-freezing.
Containers
Product specification
• HDPE, screw cap made of PP with sealing disk made of PE. Item 62071 62072 62073 62074 62075 62076
Item 48020 48021 48022 48023 48024 48025
Volume Dimensions Ø neck ml mm mm 30 60 125 250 500 1,000
38 x 38 40 x 40 52 x 52 60 x 60 75 x 75 90 x 90
14 18 28 28 28 28
Height mm
Unit piece
Price EURO
62 82 105 145 175 220
10 10 10 5 5 5
41.00 51.00 72.00 57.00 64.00 80.00
THOMAPLAST -Wide-Mouth Bottle made of LDPE ®
Volume Outside Ø Ø neck ml mm mm 100 250 500 1,000 1,500 2,000
48 66 81 101 115 126
31 41 54 69 69 69
Height mm
Unit piece
Price EURO
79 102 124 155 175 195
10 6 6 5 3 2
29.00 30.00 36.00 34.00 39.00 32.00
THOMAPLAST®-Wide-Mouth Bottle made of HDPE square, leakproof Product specification
• Rectangular, natural-coloured, translucent, dimensional stable, impact-resistant wide-mouth bottle made of HDPE with leakproof screw closure.
Product specification
• LDPE, translucent, natural-coloured; with leakproof screw closure
Item Volume Dimensions Item 62040 62041 62042 62043 62044 62045 62046 62047 62048 62049
Volume Outside Ø Ø neck ml mm mm 50 100 200 250 300 500 750 1,000 1,500 2,000
39 48 59 64 67 77 88 95 108 120
24 24 31 31 31 39 39 50 50 50
Height mm
Unit piece
Price EURO
75 95 116 122 130 156 175 207 228 250
10 10 10 6 6 5 5 3 3 3
30.00 36.00 45.00 33.00 39.00 36.00 44.00 48.00 51.00 51.00
ml
mm
10845 250 10846 500 10847 1,000
59 x 59 68 x 68 90 x 90
Ø Height External Unit Price neck thread mm mm piece EURO 30 30 50
110 146 170
GL50 GL65 GL65
5 5 3
39.00 49.00 45.00
THOMAPLAST®-Wide-Mouth Bottle made of PP Product specification
• Robust, transparent, sterilizable (up to +130 °C) bottle made of polypropylene, with leakproof screw closure.
THOMAPLAST®-Wide-Mouth Bottle made of HDPE
Item 60966 60967 60968
Volume Outside Ø Ø neck ml mm mm 60 150 250
40 50 60
21 26 35
Height mm
Unit piece
Price EURO
85 105 145
10 10 10
52.00 58.00 79.00
THOMAPLAST® I - 2015 7
Laboratory Plastics - Bottles, Carboys and Accessories Item 60969 60970 60971
Volume Outside Ø Ø neck ml mm mm 500 1,000 2,000
75 90 120
45 54 54
Height mm
Unit piece
Price EURO
165 210 245
5 2 2
59.00 43.00 59.00
Containers
THOMAPLAST®-Wide-Mouth Bottle made of PVC square Product specification
• Square with screw closure. Transparent or brown-transparent (amber translucent), physiologically safe.
THOMAPLAST®-Wide-Mouth Bottle made of FEP Product specification
• Transparent, chemical-resistant, temperature-resistant (up to +150 °C), sterilizable, shatterproof wide-mouth bottles made of tetrafluoroethylene hexafluoropropylene copolymers (FEP), with absolutely leakproof screw cap. • The material is insensitive to lowest temperatures. • Preparations, e.g. vaccines, can be frozen up to temperatures of -105 °C.
Item
Item 10933 10934 10935 10936
Volume Outside Ø Ø neck ml mm mm 125 250 500 1,000
45 58 70 90
28 32 38 42
Height mm
Unit piece
Price EURO
115 125 155 200
1 1 1 1
82.00 126.00 159.00 225.00
THOMAPLAST®-Wide-Mouth Bottle made of PFA Product specification
• Transparent wide-mouth bottle finished with absolutely smooth surface, made of perfluroalkoxy of high temperature and chemical resistance. The packing lip integrated into the screw cap guarantees absolute tightness.
60973 60980 60974 60981 60975 60982 60976 60983 60977 60984 60978 60985
Volume
Design
LxW
Ø Height Unit Price neck mm mm piece EURO
ml
mm
50 50 100 100 200 200 300 300 500 500 1,000 1,000
transparent amber transparent amber transparent amber transparent amber transparent amber transparent amber
38 x 38 38 x 38 46 x 46 46 x 46 59 x 59 59 x 59 66 x 66 66 x 66 80 x 80 80 x 80 95 x 95 95 x 95
23 23 31 31 41 41 41 41 54 54 69 69
60 60 72 72 87 87 95 95 108 108 144 144
10 10 10 10 10 10 6 6 5 5 5 5
21.00 24.00 25.00 27.00 34.00 35.00 30.00 33.00 29.00 31.00 36.00 39.00
THOMAPLAST®-Wide-Mouth Bottle made of HDPE square Product specification
• Square, white, opaque, very robust (stable) wide-mouth jar made of polyethylene (HDPE) with extra large mouth, separate internal seal as well as leakproof screw closure.
Item 11979 11980 11981 11982 11983 11977
Volume Outside Ø Ø neck ml mm mm 50 100 250 500 1,000 2,000
37 45 60 75 95 130
8 THOMAPLAST® I - 2015
17 24 33 37 49 60
Height mm
Unit piece
Price EURO
85 120 150 180 215 245
1 1 1 1 1 1
73.00 92.00 121.00 151.00 205.00 300.00
Item 10835 10836 10837
Volume ml
Dimensions mm
Ø neck mm
750 1,000 1,500
95 x 95 95 x 95 95 x 95
77 77 77
Height Unit mm piece 130 155 215
5 5 5
Price EURO 44.00 69.00 77.00
Laboratory Plastics - Bottles, Carboys and Accessories
Containers
THOMAPLAST®-Wide-Mouth Bottle made of PP square Product specification
• Very sturdy, dimensionally stable wide-mouth jar made of polypropylene with two recesses for safe handgrip, wide filling opening and screw closure. • However, the square, natural-coloured, translucent jar is not absolutely liquid-tight. • Particularly suited for storage of dry chemicals. • Sterilizable up to +130 °C.
Item 10848 10849
Volume Outside Ø Ø neck l mm mm 5 10
192 232
110 110
Height mm
Unit piece
Price EURO
250 325
1 1
50.00 66.00
THOMAPLAST®-Wide-Mouth High-Shoulder Bottle made of PP Product specification Item 10785
Volume Dimensions Ø neck l mm mm 4.2
140 x 140
90
Height mm
Unit piece
Price EURO
280
1
53.00
• Standard laboratory bottles made of polypropylene. • Translucent (transparent) and with leakproof screw closure. • Sterilizable.
THOMAPLAST®-Wide-Mouth Safety Bottle made of LDPE - with internal seal Product specification
• Round, transparent bottle made of LDPE with closure cap and lead sealing device.
Item 40133 40134 40135 40136
Item 10874 10875 10876 10877 10878 10879
Volume Outside Ø Ø neck ml mm mm 50 100 250 500 1,000 2,000
40 50 60 75 95 115
24 24 36 36 50 50
Height mm
Unit piece
Price EURO
75 90 130 160 200 250
10 10 10 5 2 2
46.00 52.00 75.00 46.00 32.00 60.00
Volume Outside Ø Ø neck ml mm mm 100 250 500 1,000
48 64 77 95
24 31 39 50
Height mm
Unit piece
Price EURO
100 125 159 210
10 5 3 3
37.00 28.00 27.00 42.00
THOMAPLAST®-Wide-Mouth Conical Shoulder Bottle made of PP - with srew closure Product specification
• Transparent conical shoulder bottle with wide mouth and leakproof screw closure, specified according to DIN 12036 and 12039 resp., made of polypropylene.
THOMAPLAST®-Wide-Mouth Safety Bottle made of HDPE - octagonal Product specification
• Octagonal, natural-coloured, translucent big-bellied bottle made of HDPE with screw closure and lead sealing device.
THOMAPLAST® I - 2015 9
Laboratory Plastics - Bottles, Carboys and Accessories Item 10812 10813 10814 10815 10816
Volume
Height
ml
Outside Ø mm
100 250 500 1,000 2,000
55 73 87 108 131
96 132 172 204 243
mm
External Unit Price thread piece EURO GL32 GL45 GL45 GL63 GL63
10 10 5 3 2
49.00 62.00 44.00 48.00 39.00
THOMAPLAST®-Storage Bottle made of HDPE
Containers
Product specification
• The closure prevents vacuum generation while draining and has a R 3/4“-thread.
Item
Unit piece
Price EURO
1
23.00
40075
THOMAPLAST®-Narrow-Neck Storage Bottle made of LDPE - without cock Product specification
Product specification
• Filling carboy made of polyethylene (HDPE) with bail handles, transparent. • With or without connecting thread (pipe thread R 3/4”). • No vacuum generation while draining, due to air vent screw closure. • Air vent valve (accessory) allows attachment of a sterile filter or of calcium chloride filter. • With self-adhesive blue litre scale, the litre scale proved to be a useful auxiliary for preparing chemical compositions. • Optional accessories: closure cap item 40074 and spigot items 40047-48, 40073, 10746-10747 close absolutely tightly. Stripping of the thread is not possible, the cock is always in a straight position.
• Natural-coloured cylindrical round carboy in particularly sturdy industrial design made of LDPE with strong plastic handles on top of the shoulder.
Item 11575 11576 Item 40065 40066 40067 40068 40069 40070 40072
Volume Outside Ø l mm 5 5 10 10 25 25 60
170 170 210 210 275 275 345
Height mm
Threaded sleeve
Unit
Price
piece
EURO
350 350 445 445 580 580 826
without with without with without with with
1 1 1 1 1 1 1
56.00 68.00 61.00 87.00 111.00 123.00 221.00
Volume Outside Ø Height Bail Unit Price Ø neck handle l mm mm mm piece EURO 5 10
165 210
45 55
335 415
1 1
1 1
49.00 59.00
THOMAPLAST®-Narrow-Neck Storage Bottle made of LDPE - with cock Product specification
• Natural-coloured, translucent storage bottles with narrow neck, screw closure, bail handles, and spigot made of HDPE. • Spout-Ø: 11 mm, connecting thread: 3/4”. • Spare spigot: item 10872
RCT®-Accessories: Screw Closure for Storage Bottles - with drain function
Item 10871 62083 62085 62087
10 THOMAPLAST® I - 2015
Volume Outside Ø Height Bail Unit Ø neck handle l mm mm mm piece 5 10 25 50
165 210 275 365
47 55 55 55
335 420 540 660
1 1 2 2
1 1 1 1
Price EURO 79.00 117.00 171.00 273.00
Laboratory Plastics - Bottles, Carboys and Accessories THOMAPLAST®-Carboy (rectangular) made of LDPE without cock Product specification
Containers • Drain ball cock made of PP (ball seal made of PTFE, Seal made of NBR), outside diameter: 12 mm, cock thread: R 1/2”. • Bottles of 5 or 10 liters with rust-proof metal frame, all the rest with 2 plastic handles
• Natural-coloured rectangular carboy in particularly sturdy industrial design made of LDPE with strong plastic handles on top of the shoulder.
Item Item
Volume
l
Dimensions LxWxH mm
62078 62079 62080 11580
5 10 20 30
180 x 140 x 290 220 x 170 x 390 280 x 240 x 415 305 x 305 x 525
Ø neck mm 63 63 63 65
Bail Unit handle piece 1 1 2 2
1 1 1 1
Price
11570 11571 11572 11573
EURO 54.00 90.00 151.00 223.00
THOMAPLAST®-Carboy (rectangular) made of LDPE - with screwed ball cock
Volume Outside Ø Height Bail Unit Ø neck handle l mm mm mm piece 5 10 25 60
165 205 280 346
50 50 65 50
340 430 540 823
1 1 2 2
1 1 1 1
Price EURO 180.00 184.00 225.00 360.00
THOMAPLAST®-Jerrycan made of HDPE - square Product specification
• Rectangular with screw closure and lateral molded-in safety handgrip
Product specification
• Natural-coloured rectangular carboy made of LDPE in particularly sturdy industrial design with strong plastic handles on top of the shoulder. • Screwed Ball cock made of PP (ball seal made of PTFE), drain cock 12 mm and thread R 1/2”.
Item 41020 41021
Item
Volume
l
Dimensions LxWxH mm
11566 11567 11568 11569
5 10 20 30
180 x 140 x 290 220 x 175 x 390 280 x 240 x 415 310 x 300 x 560
Ø neck mm 63 63 63 65
Bail Unit handle piece 2 1 2 2
1 1 1 1
Price EURO 177.00 215.00 271.00 320.00
THOMAPLAST®-Carboy (round) made of PP with drain ball cock Product specification
• Natural-coloured round carboy made of polypropylene in particularly sturdy industrial design with strong plastic handles.
Volume Dimensions Ø neck l mm mm 2.3 4.4
135 x 135 142 x 142
69 109
Height mm
Unit piece
Price EURO
192 263
3 3
69.00 87.00
THOMAPLAST®-Jerrycan made of HDPE Product specification
• Wide-mouth jerrycan made of transparent HDPE with sturdy handle and extremely wide filling opening (88 mm). • The 5 l and 10 l containers have an additional air vent opening with small spout. • Connecting thread: Pipe thread 3/4” outside depending on type for adapting the THOMAFLUID®-spigot (accessory). • Screw plug and spigot close absolutely tightly. Stripping of the thread is not possible, the cock is always in a straight position. • The litre scale proved to be a useful auxiliary for preparing chemical compositions. • Optional accessories: litre scale items 40059-64, closure cap item 40074 and spigot items 40047-48, 40073, 10746-10747
THOMAPLAST® I - 2015 11
Laboratory Plastics - Bottles, Carboys and Accessories
Containers Item
Volume
l
Threaded sleeve
40045 40046
5 5
without with
Dimensions LxWxH mm
Unit
Price
piece
EURO
320 x 65 x 320 320 x 65 x 320
1 1
57.00 66.00
RCT®-Accessories: Closure Cap made of PVC Product specification Item
Volume
l
Dimensions LxWxH mm
40051 40052 40053 40054 40055 40056 40057 40058
5 5 10 10 20 20 30 30
290 x 130 x 290 290 x 130 x 290 310 x 150 x 400 310 x 150 x 400 380 x 175 x 490 380 x 175 x 490 370 x 250 x 490 370 x 250 x 490
Threaded sleeve
Unit
Price
piece
EURO
without with without with without with without with
1 1 1 1 1 1 1 1
55.00 66.00 68.00 94.00 104.00 135.00 143.00 166.00
40059 40060 40061 40062 40063 40064
Item
RCT®-Accessories: Litre Scale for Jerrycans Item
• Closure Cap for jerrycans and carboys with external thread R 3/4“, colour: grey
Internal thread
Unit piece
Price EURO
R 3/4“
1
9.00
Volume l
Graduation ml
Unit piece
Price EURO
40074
5 5 10 10 22 22
250 250 250 250 250 250
1 3 1 3 1 3
12.00 30.00 12.00 30.00 12.00 30.00
RCT®-Accessories: Tank Connection made of PP Product specification
• Connection with cylindrical external thread „G“, complete with EPDMgaskets for simple screw mounting in tank walls
THOMAPLAST®-Jerrycan made of PP - stackable Product specification
• Stackable jerrycans made of transparent polypropylene (PP) are thickwalled and place-saving at the same time. They can be placed both horizontally and vertically. • Connecting thread: pipe thread 3/4” depending on type for adapting the THOMAFLUID®-spigot (accessory). • The optional spigot closes absolutely tightly. Stripping of the thread is not possible. • With raised, indestructible litre scale. • Optional accessories: closure cap item 40074 and spigot items 40047-48, 40073, 10746-10747
Item 14352 14353 14354
External thread
d
D
L
B
Unit
Price
mm
mm
mm
mm
piece
EURO
G 1/2“ G 3/4“ G 1“
38 43 50
13.5 18 24.4
49 52 56
5.5 5.5 5.5
3 3 3
60.00 69.00 78.00
THOMAPLAST®-Wall Drying Rack made of PS Product specification
• Robust construction, light gray. Seamlessly injection-molded in one piece, with rounded edges and drain channel, thus easy to clean. Rack with 72 pegs, length 100 mm, Ø 15 mm. Pegs snap in or out easily when drying of larger flasks or cylinders. Rack with 2 hanging hooks at the top and additional fixation at the bottom, incl. dowels, mounting kit, and assembly instructions.
12 THOMAPLAST® I - 2015
Laboratory Plastics - Bottles, Carboys and Accessories
Containers
Tubes, Jars and Boxes THOMAPLAST®-Shipment Jar made of PS - with cover Product specification
• Transparent tubes made of polystyrene (PS) with easily and tightly closing cover made of polypropylene (PP).
Item 61300 61301
Dimensions mm
Design
Price EURO
450 x 630 95 x 6
72 pegs replacement peg
239.00 19.00
THOMAPLAST®-Cell Culture Flask made of PS Product specification
• The cell culture flasks are made of optically clear, biologically inert, homogenous polystyrene (PS), while the closure caps are made of orange-coloured polyethylene (PE). They guarantee absolute tightness and thus increased cell growth. • Temperature resistance up to max. +80 °C. • The cell culture flask ensures optimal proliferation for anchorage dependent cells, due to homogenous surface treatment. • Each cell culture flask is tested separately under pressure. • Each bottle lot is checked for sterility, non-toxicity, cell attachment, and cell proliferation. • The cell culture flasks are graduated, fitted with labeling surface and feet for better stability. • Sterile packaged.
Item 11892 61158 61160 61161 61162
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
1 3.5 6 10 16
13 15 18 18 23
15 30 36 52 60
50 50 50 50 50
35.00 35.00 35.00 40.00 40.00
THOMAPLAST®-Shipment Jar made of LDPE with cover
Product specification
• Translucent jar made of LDPE with well-closing cover.
Item 40437 404381 40439 40440 1
Culture area cm²
Volume ml
Unit piece
Price EURO
25 75 75 150
70 268 275 600
20 5 5 5
72.00 44.00 44.00 44.00
cell culture flask with straight neck
Item 11906 11907 11908 11909 11910 11911
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
5 12 18 28 50 70
20 24 24 24 33 33
25 35 52 85 70 105
20 20 15 10 10 5
58.00 80.00 90.00 75.00 90.00 60.00
THOMAPLAST® I - 2015 13
Laboratory Plastics - Tubes, Jars and Boxes
Containers
THOMAPLAST®-Shipment Jar made of LDPE - natural Product specification
• Translucent, with well-closing cover and fastening strap, made of LDPE.
THOMAPLAST®-Sample Vial made of PFA with screw cap and flat bottom Product specification
• The delivery consists of either two sample vials or ten sample vials including rack.
Technical specification
• Temperature range: -196 to +250 °C • Wall thickness of sample vial: 2 mm • Height of cap, sample vial: 15 mm • Dimensions of rack: 8.1 x 26.5 cm (W x L) for 10 sample vials
Item
Outside Ø mm
Height mm
Colour
Unit piece
Price EURO
8 15 16 18 20 22 25 30 30
32 50 30 44 130 32 72 52 75
nature nature nature nature white nature nature nature nature
50 30 20 30 20 30 20 20 20
45.00 48.00 50.00 48.00 46.00 48.00 52.00 62.00 68.00
60747 60749 11838 11840 118411 60750 60751 11844 11845 1
Item
ml
Dimensions of sample vial ØxH mm
72383 72382 72388 72384 72389 72385 72390 72386 72496 72498
7 7 15 15 22 22 30 30 60 60
21 x 33 21 x 33 29 x 37 29 x 37 29 x 53 29 x 53 36 x 70 36 x 70 29 x 133 29 x 133
made of PP
THOMAPLAST®-Shipment Jar made of PE/PP with screw closure Product specification
• Very stable, liquid-tight design with screw closure made of the materials polyethylene and polypropylene.
Volume
Colour
Unit
Price
piece
EURO
nature nature nature nature nature nature nature nature nature nature
2 10 2 10 2 10 2 10 2 10
62.00 167.00 82.00 243.00 92.00 318.00 97.00 318.00 160.00 580.00
THOMAPLAST®-Sample Vial made of PFA with screw cap and round bottom Product specification
Item 11898 11899
Volume Outside Ø ml mm 40 45
25 30
Height
Material
Unit
Price
mm
piece
EURO
120 98
PE (LDPE) PP
50 50
170.00 150.00
THOMAPLAST®-Sample Vials made of PFA General product specification
• Sample vial made of PFA with tight screw closure incorporating the central hole (6.4 mm and 1/4“ resp.) with thread for the extremely thick silicone-tylon-septum. A special rack made of black PE for accommodation of ten sample vials as well as two code or I.D. cards are included in the content of supply. Slots for the cards on the vials.
14 THOMAPLAST® I - 2015
• Sample vials made of PFA with a screw cap optimally closing due to intermediate seal. • Suitable as freezing vials; vials are stackable. • Rack made of black PE. • The delivery consists of either two sample vials or ten sample vials including rack, code or I.D. cards are always included in the content of supply.
Laboratory Plastics - Tubes, Jars and Boxes
Containers
Technical specification
Item
• Temperature range: -196 to +250 °C • Wall thickness of sample vial: 2 mm • Height of cap, sample vial: 14 mm • Dimensions of rack: 6.9 x 17.4 cm (W x L) for 10 sample vials Item
Volume
ml
Dimensions of sample vial ØxH mm
72394 72495 72395 72393
7 7 15 15
21 x 33 21 x 33 29 x 37 29 x 37
Colour
Unit
piece
EURO
nature nature nature nature
2 10 2 10
67.00 185.00 95.00 254.00
62009 62010 11869 11870 11871 11872 62011 62012 11873 11874 62013 11875 11876 11877 11878 11879
Price
THOMAPLAST®-Specimen Jar made of PS - with cover Product specification
• Glass-clear jars made of polystyrene (PS) with well-closing cover.
Outside Ø mm
Height mm
Unit piece
Price EURO
69 70 77 77 80 80 85 89 90 90 98 101 120 125 155 224
51 30 26 31 20 40 8 35 25 40 43 54 66 34 34 33
20 20 5 5 10 5 20 20 5 5 20 5 3 3 2 1
58.00 48.00 34.00 35.00 47.00 34.00 42.00 64.00 35.00 45.00 69.00 45.00 45.00 45.00 37.00 33.00
THOMAPLAST®-Specimen Jar made of PS with screw closure Product specification
• Transparent, stable design with screw closure but not liquid-tight, ideal for use as show glass.
Item 11849 11850 11851 11852 11853 62000 11855 11856 11857 62001 11858 11859 62002 62003 11860 11861 11862 11863 62004 62005 11864 11865 11866 62006 11867 11868 62007 62008
Outside Ø mm
Height mm
Unit piece
Price EURO
10 18 20 22 25 26 27 30 33 33 34 34 34 36 39 39 46 46 49 50 50 54 58 65 68 68 69 69
5 7 10 13 25 17.5 10 35 10 18 16 25 43 29 15 30 16 42 36 25 40 14 20 7 16 30 22 40
20 20 20 20 10 20 20 10 20 20 10 5 20 20 20 10 20 20 20 20 10 20 10 20 10 10 20 20
22.00 38.00 30.00 26.00 44.00 20.00 22.00 29.00 30.00 40.00 45.00 29.00 28.00 40.00 40.00 34.00 34.00 34.00 36.00 36.00 39.00 38.00 29.00 38.00 32.00 45.00 38.00 58.00
Item 11939 11940 11941 11942
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
60 95 120 150
48 48 48 48
52 74 90 105
25 25 20 20
80.00 85.00 74.00 82.00
THOMAPLAST®-Specimen Jar made of PP - with cover Product specification
• Well closing cover • Chemical-resistant and sterilizable up to +130 °C
THOMAPLAST® I - 2015 15
Laboratory Plastics - Tubes, Jars and Boxes Item 61197 61198 61199 61200
Containers
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
15 25 50 100
30 32 40 50
30 38 45 60
20 20 20 10
40.00 48.00 58.00 37.00
Item 60209 60210 11985 11986 72497 60211 11987 72396 72397 72398 60212 11988 72399 60213 72400 72401 72402 72554 72403 72404 60214 72405 72406 60216 72407 72408
THOMAPLAST®-Specimen Jar made of LDPE with screw closure Product specification
• Very sturdy design made of LDPE, with leakproof, easy-turnable screw closure, colour: translucent.
Item 11900 11901 11902 11903 11904 11905
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
5 10 30 60 90 180
21 21 35 35 55 55
30 55 53 90 60 108
3 3 3 3 2 1
36.00 39.00 45.00 54.00 44.00 27.00
Volume Outside Ø ml mm 7 30 30 60 60 60 90 90 120 120 120 180 180 240 240 240 300 350 360 480 500 500 500 1,000 1,000 1,000
22 29 38 38 43 50 54 63 50 50 66 54 73 66 90 90 72 100 83 108 85 114 114 107 147 147
Height
Colour
Unit
Price
mm
piece
EURO
37 69 54 90 49 47 62 49 66 66 53 112 66 95 66 66 66 50 85 85 120 84 84 151 105 105
nature nature nature nature nature nature nature nature nature black nature nature nature nature nature black nature nature nature nature nature nature black nature nature black
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
39.00 44.00 48.00 58.00 59.00 88.00 64.00 69.00 98.00 98.00 113.00 79.00 103.00 164.00 125.00 125.00 141.00 185.00 154.00 215.00 280.00 246.00 246.00 408.00 368.00 368.00
THOMAPLAST®-Specimen Box made of PS with cover
THOMAPLAST®-Specimen Jar made of PFA with screw cap Product specification
• Specimen jars made of PFA with a screw cap optimally closing due to intermediate seal. • The jars are manufactured seamlessly, translucent (transparent) and black resp., stackable, and freezable. • The jar lid can be labeled with felt-tip pen.
Technical specification
• Temperature range: -196 to +250 °C • Wall thickness, specimen jar: 2.5 mm
Item 62015 62016 62017 62018 62019 62020 62021 62022 62023 62024 62025 62026
16 THOMAPLAST® I - 2015
Volume ml
Dimensions LxWxH mm
Unit piece
Price EURO
23 14 24 35 51 75 110 52 150 108 230 158
47 x 45 x 11 50 x 30 x 9 50 x 30 x 16 57 x 36 x 17 57 x 36 x 25 57 x 47 x 28 60 x 51 x 26 73 x 42 x 17 75 x 75 x 27 80 x 50 x 27 95 x 68 x 35 99 x 59 x 27
20 20 20 20 20 20 20 20 20 20 20 20
24.00 24.00 24.00 24.00 28.00 38.00 46.00 34.00 44.00 44.00 58.00 58.00
Laboratory Plastics - Tubes, Jars and Boxes Item 62027 62028 62029 62030 62031 62032
Containers
Volume ml
Dimensions LxWxH mm
Unit piece
Price EURO
Item
400 125 160 255 3,150 2,300
102 x 85 x 47 107 x 53 x 22 107 x 75 x 20 115 x 75 x 30 190 x 145 x 115 198 x 154 x 75
20 20 20 20 2 2
76.00 48.00 52.00 74.00 43.00 26.00
11930 11931 11932 11933 11934 11935 61190 61191 11936 61192 11937 61194 61195 11938
THOMAPLAST®-Packaging Jar made of PP - with cover Product specification
• White, well-closing, shatterproof jar made of polypropylene (PP). • Cover can be labeled.
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
12 25 35 60 75 125 150 250 250 500 500 800 1,000 1,000
29 34 38 45 45 56 65 65 73 90 95 90 100 113
30 40 48 55 65 67 50 82 78 80 91 125 130 128
25 25 25 25 25 25 8 6 20 5 10 3 3 5
35.00 50.00 60.00 65.00 70.00 95.00 44.00 39.00 92.00 41.00 82.00 30.00 36.00 62.00
THOMAPLAST®-Packaging Jar made of TPX with screw closure Product specification
Item 61227 61228 61229 61230 61231 61232 61233 61235
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
10 20 30 50 75 100 150 250
40 40 55 55 55 70 70 95
20 30 25 40 50 40 60 60
25 25 25 25 25 25 25 25
37.00 65.00 65.00 70.00 75.00 115.00 125.00 140.00
THOMAPLAST®-Packaging Jar made of PP with screw closure
• Glass-clear, shatterproof jar in sturdy design, made of TPX (polymethylpentene) • Lid made of polypropylene (PP) • The jar is chemical-resistant to a great degree and sterilizable up to +130 °C
Item 11634 11635 11636 11637 11638
Product specification
• White, extremely stable but light jar made of polypropylene with easyturnable screw closure (not liquid-tight). • Physiologically safe: for use with powder, granulate, pastes etc. • Outstandingly chemical-resistant and sterilizable up to +121 °C.
Volume ml
Outside Ø mm
Unit piece
Price EURO
60 125 250 500 1,000
55 70 70 120 120
5 3 3 1 1
39.00 39.00 48.00 24.00 29.00
THOMAPLAST®-Packaging Jar made of HDPE
THOMAPLAST® I - 2015 17
Laboratory Plastics - Tubes, Jars and Boxes
Containers
THOMAPLAST®-Storage Jar made of LDPE
Product specification
• White, very stable, cylindrical jar made of polyethylene. • The cover must be ordered separately in different colors. Item 11916 11917 11918 11919 11920 11921
Volume ml
Outside Ø mm
Height mm
250 500 750 1,000 1,300 1,500
95 95 95 95 100 100
60 95 135 160 185 200
Product specification
Unit Price Price piece EURO EURO 10 10 10 10 10 10
50.00 56.00 60.00 61.00 69.00 82.00
• Translucent, shatterproof jar made of LDPE with absolutely leakproof lid. • Resistant to chemicals and temperature up to +100 °C.
50.00 56.00 60.00 61.00 69.00 82.00
RCT®-Accessories: Cover for Packaging Jars unicolour Item
Produkt specifikation
• Covers with sealing lips to Packaging Jars 11916-11921.
61172 61173 61174 61175 61176
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
200 400 700 1,000 2,000
90 110 110 125 150
40 50 90 110 140
5 5 5 5 5
43.00 49.00 59.00 57.00 67.00
THOMAPLAST®-Storage Jar made of PP with screw closure Product specification Item 11893 11894 11895 11896 11897 11880 11881 11882
Suitable for
Colour
Unit piece
Price EURO
250 / 500 / 750 / 1.000 ml 250 / 500 / 750 / 1.000 ml 250 / 500 / 750 / 1.000 ml 250 / 500 / 750 / 1.000 ml 250 / 500 / 750 / 1.000 ml 1.300 / 1.500 ml 1.300 / 1.500 ml 1.300 / 1.500 ml
white black red blue yellow white red blue
1 1 1 1 1 1 1 1
1.00 1.00 1.00 1.00 1.00 2.00 2.00 2.00
THOMAPLAST®-Storage Jar made of PS - with cover Product specification
• Transparent jar made of PP (polypropylene) in sturdy design • Lid made of HDPE (polyethylene)
Item 11970 11971 11972
• Transparent jar with cover made of polystyrene (PS).
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
250 500 1,000
104 104 126
50 100 126
3 3 1
27.00 36.00 22.00
THOMAPLAST®-Storage Box made of HDPE
Item 11968
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
950
105
135
5
31.00
18 THOMAPLAST® I - 2015
Laboratory Plastics - Tubes, Jars and Boxes
Containers
RCT®-Accessories: Cover made of PS for Partitioned Inserts - transparent
Product specification
• Unbreakable, with leakproof snap-on lid • Also usable as storage jar for the refrigerator or as provision jar Item 61256 61257 61258 61259 61260 61261 61262
Volume l
Dimensions mm
Height mm
Unit piece
Price EURO
0.5 1 1 1.5 2 3.2 2
100 x 100 100 x 100 200 x 100 200 x 100 200 x 200 200 x 200 250 x 100
65 130 65 95 65 95 95
5 5 4 3 2 2 2
34.00 41.00 46.00 39.00 35.00 37.00 35.00
THOMAPLAST®-Selection and Storage Box made of PS
Item
Product specification
61249 61250 61251 61252 61253 61254
• By use of partitions the storage boxes (size 330 x 220 mm) can be arranged in many variants. • Glass-clear, with hinged lid, without partition.
Dimensions mm
For item
Unit piece
Price EURO
54 x 54 108 x 54 108 x 108 162 x 108 215 x 108 322 x 108
61185, 61237, 61244 61238, 61245 61239, 61246 61240, 61247 61241 61242
10 10 7 5 5 4
25.00 29.00 35.00 23.00 26.00 32.00
THOMAPLAST®-Conway Diffusion Cell made of PP Product specification
• A knob on the cover is used to raise it, and the circular moat of the cell receives the cover, sealing off the outermost chamber.
Technical specification
• Depth: moat: 6 mm, central chamber: 9 mm, Inner chamber: 6 mm
Item 61178 12066 61180 61181 61182 61183
Dimensions mm
Height mm
Unit piece
Price EURO
140 x 85 170 x 105 250 x 170 330 x 220 330 x 220 330 x 220
30 30 45 30 50 70
1 1 1 1 1 1
15.00 25.00 47.00 58.00 60.00 69.00
THOMAPLAST®-Insert made of PS Item
Product specification
• For selection- and storage boxes item 61178 - 61183 with the same height.
968382
Item 61185 61237 61238 61239 61240 61241 61242 61244 61245 61246 61247
Dimensions mm
Height mm
Colour
Unit piece
Price EURO
54 x 54 54 x 54 108 x 54 108 x 108 162 x 108 215 x 108 322 x 108 54 x 54 108 x 54 108 x 108 162 x 108
23 45 45 45 45 45 45 62 62 62 62
red red yellow blue green light grey grey red yellow blue green
10 10 10 7 5 4 3 10 7 5 4
31.00 36.00 46.00 56.00 46.00 48.00 48.00 46.00 56.00 46.00 48.00
Outside Ø mm
Ø inner chamber mm
Ø ring chamber mm
Unit
Price
piece
EURO
59
12.5
34
3
27.00
THOMAPLAST®-Weigh Jar made of PP
THOMAPLAST® I - 2015 19
Laboratory Plastics - Tubes, Jars and Boxes
Containers
Product specification
Dishes and Crucibles
• Transparent, with air-tightly closing knobbed lid • Steam autoclavable at +120 °C Item 96570 96572 60736 60737 60738 60739 60740 60741 60742
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
THOMAPLAST®-Cell Culture Petri Dish made of PS
10 20 30 25 65 50 65 200 400
32 38 30 40 40 50 60 60 70
25 25 50 30 60 30 35 90 120
12 12 5 5 5 5 5 3 3
60.00 60.00 36.00 41.00 41.00 45.00 49.00 30.00 33.00
• Cell culture petri dishes are made of polystyrene (PS). • Special treatment of the inner surface promotes growth of anchoragedependent cells. • Each dish is ventilated threefold to allow effective gas exchange. • Stacking rings avoid scratches on the dishes and allow to stack the dishes in the incubation room. • The dishes are sterile packaged.
Product specification
THOMAPLAST®-Transfer Reaction Vessel made of PFA for Fluids Product specification
• Transfer reaction vessel made of PFA with screw cap containing one or more fittings for liquid transfer. The lid with all screw-in fittings is made in one piece. The transfer tubing (1/4”) is adapted with a clamping nut made of PFA.
Item 40457 40458 40459 40460 404611 404621 40463 40464
Item 72410 72411 72412 72413 72414 72415 72416 72417 72418 72419 72420 72421 72422 72423 72424 72425 72426
Volume Number Outside of fittings Ø ml mm 7 15 23 30 120 120 180 240 240 120 180 240 300 360 500 500 1,000
1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2
24 33 33 33 70 70 70 70 70 70 70 70 89 89 89 89 110
Colour
Unit
Price
piece
EURO
nature nature nature nature nature black nature nature black nature nature nature nature nature nature black black
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
44.00 54.00 59.00 64.00 85.00 116.00 121.00 139.00 139.00 139.00 144.00 162.00 172.00 187.00 187.00 236.00 302.00
1
Outside Ø mm
Height mm
Culture area cm²
35 35 60 60 60 60 100 100
39 39 58 58 58 58 94 94
Unit
Price
piece
EURO
10 10 15 15 15 15 20 20
9 9 21 21 21 21 55 55
100 300 100 300 100 300 100 300
80.00 204.00 100.00 255.00 90.00 245.00 120.00 490.00
with counting grid
THOMAPLAST®-Petri Dish made of PS Product specification • Sterile packages • Usable up to +80 °C • Not suited for solvents
Item 61072 61073 61074
20 THOMAPLAST® I - 2015
Inside Ø mm
Outside Ø mm
Height mm
Design
Unit piece
Price EURO
60 92 140
16 16 20.6
without cams with cams without cams
100 100 100
60.00 70.00 70.00
Laboratory Plastics - Dishes and Crucibles
Containers
THOMAPLAST®-Petri Dish made of PFA
Item
Product specification
Volume ml
Unit piece
Price EURO
100
2
74.00
72553
• Dishes stackable, coated bottom providing smooth surface
THOMAPLAST®-Evaporating Dish made of PTFE high, with spout Product specification
• High, cylindrical dish made of PTFE with flat bottom and spout, inner surface non-porous and smooth • Chemical-resistant except to alkali metals; free of leachable components and biocompatible • Temperature loadable from -200 to +260 °C, sterilizable with all commonly used methods
Item 72551 72552
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
50 100
51 102
10 15
2 2
48.00 108.00
THOMAPLAST®-Weighing Dish made of PS Product specification
• For quick and clean weighing of powder and liquids
Item 47906 47907 47908 47909
Item 61077
Dimensions LxWxH mm
Unit piece
Price EURO
40 x 40 x 7
25
15.00
THOMAPLAST®-Evaporating Dish made of PFA with spout
Volume ml
Ø top mm
Height mm
Unit piece
Price EURO
25 50 100 250
38 49 64 97
37 41 54 62
1 1 1 1
25.00 42.00 48.00 92.00
THOMAPLAST®-Evaporating Dish made of PTFE with spout Product specification
• Very sturdy, stable evaporation dish with small spout, in slightly conical design, flat bottom and smooth surface, made of polytetrafluoroethylene (PTFE). • Resistant to chemicals and temperature up to +260 °C.
Product specification
• Dish with spout • Temperature loadable from -200 to +260 °C, sterilizable with all commonly used methods, Weight: approx. 55 g
Item 11684 11685 11687 11686
Volume ml
Ø top mm
Height mm
Unit piece
Price EURO
25 50 100 250
38 49 64 125
37 41 54 36
1 1 1 1
51.00 59.00 66.00 88.00
THOMAPLAST® I - 2015 21
Laboratory Plastics - Dishes and Crucibles
Containers
THOMAPLAST®-PTFE Evaporating Dish flat, without Spout Product specification
• Flat dish made of white polytetrafluoroethylene (PTFE) • Resistant to chemicals and temperature up to +260 °C
Item 11688 11689 11690 Item 11691 11692 11693 11694 11695
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
25 50 100 180 350
40 65 80 80 100
25 23 28 45 55
1 1 1 1 1
34.00 35.00 45.00 58.00 101.00
THOMAPLAST -Crystallization Dish made of PTFE ®
Product specification
Volume ml
Ø top mm
Height mm
Unit piece
Price EURO
5 25 75
25 45 55
18 30 44
1 1 1
21.00 32.00 44.00
Measuring Beakers and Measuring Flasks THOMAPLAST®-Beaker made of PMP Product specification
• Glass-clear beaker according to DIN 12331 (glass) / ISO 7056 with red imprinted graduation. • Made of biocompatible, non-leachable polymethylpentene (PMP). • Shatterproof and temperature-resistant to +160 °C.
• Flat, straight-side dish made of PTFE with flat bottom, inner surface non-porous and smooth. • Chemical-resistant except to alkali metals; free of leachable components and biocompatible. • Temperature loadable from -200 to +260 °C, sterilizable with all commonly used methods.
Item
Item 47911 47912 47913
Volume ml
Ø top mm
Height mm
Unit piece
Price EURO
50 100 250
66 80 100
25 29 56
1 1 1
34.00 56.00 80.00
THOMAPLAST®-Crucible made of PTFE Product specification
• Crucible in slightly rounded, stable design with absolutely flat bottom and smooth surface, made of polytetrafluoroethylene (PTFE). • Absolutely highest resistance to all kind of inorganic and organic compounds. Temperature resistant up to +250 °C.
22 THOMAPLAST® I - 2015
40528 40529 40530 40531 40532 40533 40534 40535 40536 40537 40538 40539 40540
Volume Outside Ø ml mm 10 25 50 100 150 250 400 600 800 1,000 2,000 3,000 5,000
25 31 40 49 56 68 77 91 98 102 133 174 185
Height Graduation
Unit
Price
mm
ml
piece
EURO
35 47 60 70 80 94 109 125 136 149 183 214 248
2 5 10 20 20 50 50 100 100 100 200 200 500
6 6 6 6 6 3 3 3 3 3 3 1 1
18.00 21.00 27.00 33.00 39.00 24.00 30.00 36.00 45.00 51.00 66.00 49.00 61.00
Laboratory Plastics - Measuring Beakers and Measuring Flasks THOMAPLAST®-Beaker made of PP
Item
Product specification
41027 41028 41029 41030
• Transparent, with coloured graduation • Autoclavable at +121 °C • Very good chemical resistance
Containers Volume Outside Ø Height Graduation Unit ml mm mm ml piece 250 400 600 1,000
67 77 91 105
96 109 125 143
5 10 10 50
1 1 1 1
Price EURO 38.00 54.00 67.00 95.00
THOMAPLAST®-Beaker made of PFA for Hot Plates Application area
• Digestion of samples and dissolving of substances • Etching tests in metallurgy • Reaction processes with hydrogen fluoride (HF) • Use of very reactive catalysts • Preparation of biologics such as sensitive cell cultures in which the binding or absorption of proteins poses a problem Item 60600 60601 60602 60603 60604 60605 60606 60607 60608 60609 60610 60611 60612
Volume Outside Ø Height Graduation Unit ml mm mm ml piece 10 25 50 100 150 250 400 600 800 1,000 2,000 3,000 5,000
25 31 40 49 56 68 77 91 98 102 133 174 185
35 47 60 70 80 94 109 125 136 149 183 214 248
2 5 10 20 20 50 50 100 100 100 200 200 500
6 6 6 6 6 6 3 3 3 3 3 1 1
Price EURO 15.00 18.00 21.00 24.00 27.00 30.00 21.00 24.00 27.00 30.00 45.00 29.00 37.00
Product specification
• Beakers made of PFA (perfluoroalkoxy) with beaker bottoms made of graphite which is resistant to high temperatures and transmits the heat to the PFA material. • The fluid only contacts PFA. • The hot plate beakers withstand highest heating temperatures without any problems, even when used with highly active or etching solutions. • The beakers are absolutely chemical-resistant and unbreakable. Contamination due to leakage is not possible. • The hot plate temperature should not exceed +275 °C. • Naked flame as heat source is prohibited in any case. • Substances must never be evaporated totally (to dryness).
THOMAPLAST®-Beaker made of ECTFE Product specification
• Laboratory beakers made of chemically inert ECTFE (ethylene-trifluorochloroethylene-copolymers), transparent with imprinted black scale, in laboratory-oriented sizes from 25 to 1000 ml. • Antiadhesive, non-porous surface. • Physiologically safe and biocompatible. • Temperature resistant from -100 to +150 °C. • Chemically and steam sterilizable.
Item 11709 11710
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
250 400
75 85
94 112
1 1
112.00 176.00
THOMAPLAST®-Tapered Measuring Beaker made of TPX
Item 41024 41025 41026
Volume Outside Ø Height Graduation Unit ml mm mm ml piece 25 50 100
32 39 50
50 59 72
2 5 5
3 3 2
Price EURO 39.00 51.00 44.00
THOMAPLAST® I - 2015 23
Laboratory Plastics - Measuring Beakers and Measuring Flasks Product specification
• Transparent, shatterproof measuring beaker made of methylpentene polymers (TPX). • Fitted with very large foot and easy-to-read engraved scale. • Very good resistance to chemicals, but not suitable for solvents, sterilizable. • Suited for temperatures up to +130 °C. Item 11728 11729 11730 11731
Volume ml
Graduation ml
Unit piece
Price EURO
100 250 500 1,000
2 5 10 20
2 1 1 1
35.00 27.00 33.00 56.00
Item 11726 11727
Containers Volume
Height
ml
mm
Graduation ml
1,000 2,000
167 212
10 20
Unit
Price
Price
piece EURO EURO 3 3
30.00 30.00 42.00 42.00
THOMAPLAST®-Beaker with Handle made of PP cylindrical, high Product specification
• With handle and spout; graduated, transparent
THOMAPLAST®-Beaker with Handle made of SAN transparent Product specification
• Glass-clear, tall measuring beaker made of styrene acrylonitrile (SAN) with pointed triangular spout and easy-to-read engraved scale. Not suited for solvents.
Item 60613 60614 60615 60616 60617 60618 Item 11732 11733 11734 11735 11736
Volume Outside Ø Height Graduation Unit ml mm mm ml piece 250 500 1,000 2,000 3,000
70 91 116 150 170
120 133 170 215 242
5 10 10 20 50
6 6 3 2 1
Price EURO 30.00 39.00 30.00 37.00 25.00
Volume Outside Ø Height Graduation Unit ml mm mm ml piece 250 500 1,000 2,000 3,000 5,000
70 91 116 150 170 210
120 133 170 215 242 270
5 10 10 20 100 100
6 6 3 3 1 1
Price EURO 30.00 30.00 21.00 42.00 19.00 25.00
THOMAPLAST®-Scoop Beaker made of PP Product specification
• Particularly sturdy, natural-coloured scoop beaker with broad handle for safe drawing of fluids and bulk material, made of polypropylene (PP).
THOMAPLAST®-Beaker with Handle made of PP conical Product specification
• Very sturdy, hot water-resistant beaker with handle made of polypropylene (PP) with flat triangular spout and printed scale, transparent and of conical shape (stackable).
Item 11741
24 THOMAPLAST® I - 2015
Volume ml
Unit piece
Price EURO
1,500
1
20.00
Laboratory Plastics - Measuring Beakers and Measuring Flasks THOMAPLAST®-Measuring Cylinder made of SAN short
Containers
THOMAPLAST®-Measuring Cylinder made of PP Product specification
• Transparent, tall shape, graduated (according to DIN 12680)
Product specification
• Transparent (glass-clear), short measuring cylinder with large foot, made of styrene acrylonitrile (SAN). • Easy-to-read scale. • Not suitable for strong acids and solvents.
Item
Item 11719 11720 11721 11722 11723 11724
Volume Outside Ø Height Graduation Unit ml mm mm ml piece 25 50 100 250 500 1,000
25 30 40 50 70 80
120 140 160 190 220 285
0.5 1 2 5 10 20
6 6 6 3 3 1
60592 60593 60594 60595 60596 60597 60598 60599
Price EURO 30.00 42.00 45.00 39.00 48.00 22.00
THOMAPLAST®-Measuring Cylinder made of SAN tall Product specification
• Transparent (glass-clear), tall measuring cylinder with large hexagonal foot, made of styrene acrylonitrile (SAN). • Easy-to-read scale. • Temperature resistant from -40 to +70 °C. • Sterilizable, but not autoclavable. • According to Class B DIN 12681 / ISO 6706.
Volume Outside Ø Height Graduation Unit ml mm mm ml piece 10 25 50 100 250 500 1,000 2,000
15 22 27 33 44 58 69 97
145 170 200 250 315 360 440 482
0.2 0.5 1 1 2 5 10 20
6 6 6 6 3 3 3 1
Price EURO 30.00 39.00 42.00 45.00 39.00 48.00 69.00 39.00
THOMAPLAST®-Measuring Flask made of TPX Product specification
• Measuring flask made of glass-clear TPX (PMP, polymethylpentene). • Design with narrow neck, NS-stopper (standard ground joint stopper) made of PP and ring mark. • Accuracy: Class B, adjusted up to +20 °C.
Item
Item 11711 11712 11713 11714 11715 11716 11717 11718
Volume Outside Ø Height Graduation Unit ml mm mm ml piece 10 25 50 100 250 500 1,000 2,000
16 21 28 34 47 61 76 97
140 169 199 260 315 350 415 482
0.2 0.5 1 1 2 5 10 20
6 6 6 3 3 2 1 1
Price EURO 36.00 39.00 48.00 36.00 54.00 47.00 29.00 60.00
40541 40542 40543 40544 40545 40546
Volume ml 25 50 100 250 500 1,000
Height Size (NS) Tolerance Unit mm mm piece 115 150 180 235 270 310
10/19 12/21 14/23 19/26 19/26 24/29
±0.08 ±0.12 ±0.20 ±0.30 ±0.50 ±0.80
3 3 3 2 2 1
Price EURO 39.00 45.00 51.00 41.00 43.00 23.00
THOMAPLAST® I - 2015 25
Laboratory Plastics - Measuring Beakers and Measuring Flasks
Containers
THOMAPLAST®-Measuring Flask made of PP
THOMAPLAST®-Erlenmeyer Flask made of PC
Product specification
Product specification
• Measuring flask made of highly transparent PP • Design with narrow neck, NS-stopper (standard ground joint stopper) made of PP and ring mark. • Tolerances class B according to DIN EN ISO 1042. Exposure to temperatures above +60 °C may effect accuracy. Cleaning up to max. +60 °C is recommended.
• Flask made of polycarbonate (PC), glass-clear (transparent) in particularly sturdy design with reading scale. • Resistant to chemicals and temperature up to approximately +130 °C.
Item Item 60624 60625 60626 60627
Volume ml 50 100 250 500
Height Size (NS) Tolerance Unit mm mm piece 150 180 235 270
12/21 14/23 19/26 19/26
±0.12 ±0.20 ±0.30 ±0.50
3 3 3 3
11655 11656 11657 11658 11659
Price EURO 39.00 42.00 51.00 54.00
THOMAPLAST®-Measuring Flask made of PFA
Volume ml
Unit piece
Price EURO
50 125 250 500 1,000
2 1 1 1 1
35.00 22.00 30.00 44.00 65.00
THOMAPLAST®-Erlenmeyer Flask made of PP Product specification
Product specification
• Flask, translucent, in sturdy, stable design, chemical- and temperatureresistant up to approx. +130 °C.
• Exact metering of highly pure, bioactive or aggressive materials. • Highly transparent measuring flask, individually calibrated ring mark according to DIN 12664, Class B. • Made of highly chemical-resistant PFA (perfluoroalkoxy polymer) with standard thread and tight-closing screw cap made of PFA, which protects against contamination. • Sterilizable with all commonly used methods, temperature-resistant from -200 to +260 °C.
Item 61336 61337 61338 61339 61341
Volume ml
Size (NS)
Unit piece
Price EURO
25 50 125 250 1,000
14.5 14.5 14.5 19 29
3 3 3 2 1
39.00 39.00 45.00 56.00 37.00
THOMAPLAST®-Erlenmeyer Flask made of PP with screw cap, light Product specification
• Light design. • Erlenmeyer flask made of highly transparent polypropylene (PP). • Wide-neck design with thread and screw cap.
Item
Volume
Height
ml
mm
12067 47846 47847 47848 47849
25 50 100 250 500
115 150 180 235 270
26 THOMAPLAST® I - 2015
External Tolerance Unit thread mm piece GL18 GL18 GL18 GL25 GL25
±0.04 ±0.06 ±0.10 ±0.15 ±0.25
1 1 1 1 1
Price EURO 139.00 149.00 185.00 231.00 251.00
Laboratory Plastics - Measuring Beakers and Measuring Flasks Item 40523 40524 40525 40526 40527
Volume ml
Unit piece
Price EURO
50 100 250 500 1,000
3 3 3 2 1
30.00 33.00 42.00 33.00 27.00
Containers
Funnels and Accessories THOMAPLAST®-Funnel made of PP Product specification
• Funnel made of polypropylene (PP), natural-coloured
THOMAPLAST®-Erlenmeyer Flask made of PTFE Product specification
• With neck, formed as standard ground joint socket • Suitable for vacuum
Item
Item 12025 12026 94591 12027
Volume Ø bottom Height Size (NS) Unit ml mm mm piece 50 100 250 500
54 63 85 107
86 128 144 190
19/26 19/26 29/32 29/32
1 1 1 1
60645 60646 60647 60648 60649 60650 60651 606521 606531 60654
Price EURO 121.00 156.00 278.00 381.00
1
Volume
Ø top
Height
Unit
mm
Ø outlet outside mm
ml 5 12 30 80 220 340 750 1,600 3,800 10,000
Price
mm
piece
EURO
30 40 50 75 100 120 150 220 250 320
5 5 9 10 13 14 17 22 30 45
47 65 85 110 155 180 220 200 260 460
6 6 6 3 3 3 3 1 1 1
21.00 21.00 21.00 12.00 15.00 15.00 18.00 17.00 19.00 36.00
with strainer
THOMAPLAST®-Round-Bottom Flask with Standard Ground-Glass Joint made of PFA
RCT®-Accessories: Aluminium Strainer for Funnels
Product specification
Product specification
• Temperature-loadable from -200 to +250 °C. • Only relatively suitable for vacuum, e.g. at 30 mbar at +50 °C.
• Fitting filters item 60652 to 60653, replaceable
Item 606551
Thickness mm
Unit piece
Price EURO
0.22
5
16.00
THOMAPLAST®-Funnel made of PP - long stem Product specification
• Analytical funnel made of polypropylene (PP) with long, narrow stem
Item 479171 11976 120301
Volume Outside Ø Height Size (NS) Unit ml mm mm piece 100 250 500
65 88 107
117 148 177
29/32 29/32 29/32
1 1 1
Price EURO 88.00 101.00 140.00
THOMAPLAST® I - 2015 27
Laboratory Plastics - Funnels and Accessories Item
Ø top mm
Length stem mm
Ø outlet inside mm
Ø outlet outside mm
11753 11754 11755 11756 11757 11758
25 35 50 60 80 100
40 40 50 150 150 150
2 3.5 4 4 4 4
4 5 6 8 8 8
Containers Price
THOMAPLAST®-Funnel made of PTFE - conical
piece
EURO
Product specification
5 5 5 2 2 2
19.00 24.00 27.00 36.00 40.00 45.00
Unit
• Chemical-resistant except to alkali metals; free of leachable components and biocompatible. • Temperature loadable from -200 to +260 °C, sterilizable with all commonly used methods.
THOMAPLAST®-Funnel made of PP - short stem Product specification
• Stable laboratory funnel made of natural-coloured polypropylene (PP)
Item
Item 11748 11749 11750 11751 11752
Ø top mm
Ø outlet outside mm
Unit piece
Price EURO
50 75 100 120 160
9 10 11 14 17
10 10 6 5 3
28.00 37.00 36.00 39.00 30.00
THOMAPLAST®-Thistle Tube made of PP Product specification
Ø top mm
Ø outlet outside mm
Length stem mm
Unit
Price
piece
EURO
12033 12034 12035 94593 340026 340027
18 30 50 70 100 150
4 6 7 10 14 16
12 37 45 74 90 120
1 1 1 1 1 1
39.00 44.00 50.00 136.00 136.00 216.00
THOMAPLAST®-High-Speed Funnel made of TPX Product specification
• For rapid filtration without vacuum. • Outstandingly suited for geological, metallurgic, and gravimetric soil analyses. • Internal helicoid ribs prevent sticking of filter paper. • TPX (polymethylpentene) is resistant to hot, caustic and volatile matters. • Autoclavable and temperature-resistant up to +177 °C.
• Bell-shaped upper part • Excellent chemical resistance • Stands steam sterilization up to +121 °C
Item
Item 60436
Ø top mm
Ø flare mm
Length stem mm
Unit
Price
piece
EURO
27
41
254
12
54.00
28 THOMAPLAST® I - 2015
Ø top mm
Length stem mm
Ø outlet inside mm
Ø outlet outside mm
Unit
Price
piece
EURO
60419 60420 60421 60422 60423 60424
50 70 70 100 140 200
150 150 70 110 130 160
3 3 3 7 10 20
7.5 7.5 10 10 16 26
2 2 1 2 1 1
16.00 18.00 11.00 21.00 23.00 29.00
Laboratory Plastics - Funnels and Accessories
Containers
THOMAPLAST®-Powder Funnel made of PP Product specification
• Stable laboratory funnel made of natural-coloured polypropylene (PP)
Item
Item
Ø outlet outside mm
Height
Unit
Ø top mm
mm
piece
EURO
60655 60656 60657 60658 60659
65 80 100 120 150
18 24 26 30 32
68 75 94 110 138
5 5 3 3 2
15.00 17.00 18.00 18.00 16.00
11646 11647 11648 11649
Price
Volume ml
Unit piece
Price EURO
125 250 500 1,000
1 1 1 1
197.00 220.00 324.00 378.00
RCT®-Accessories: Separatory Funnel Holder made of PP Product specification
• With clamp for support rods Ø 8-14 mm
THOMAPLAST®-Separatory Funnel made of PP Product specification
• Leakproof screw closure made of PP. • Self-lubricating cock and plug made of PTFE. • Highly transparent, phase separation is clearly recognizable. • Autoclavable except cock and plug. • Resistant to nearly all chemicals including hydrofluoric acid.
Item 60831
Suitable for
Unit piece
Price EURO
125 - 500 ml funnels
1
23.00
Test Tubes and Centrifuge Tubes Item 60782 60783 60784 60785
Volume ml
Unit piece
Price EURO
THOMAPLAST®-Test Tube made of PS - crystal-clear
125 250 500 1,000
1 1 1 1
72.00 90.00 94.00 130.00
• Cylindrical disposable tubes with or without rim made of polystyrene (PS). • Not suitable for solvents and temperatures exceeding +70 °C and for centrifugation.
Product specification
THOMAPLAST®-Separatory Funnel made of FEP Product specification
• Transparent, shatterproof separatory funnel made of fluorinated ethylene-propylene (FEP), fitted with a easy-turnable, self-lubricating cock and leakproof screw closure. Excellent resistance to chemicals and temperature from -200 to +205 °C. • FEP is antiadhesive and easy to clean. Filled-in substances discharge completely without adhesion to the funnel wall.
60918
60918
THOMAPLAST® I - 2015 29
Laboratory Plastics - Test Tubes and Centrifuge Tubes Item 60915 60917 60918 60920 60912
Volume ml
Outside Ø mm
Height mm
Rim
Unit piece
Price EURO
4 4 5 5 10
11 11 12 12 16
55 70 86 92 100
without without with without without
250 250 250 250 250
50.00 50.00 50.00 75.00 75.00
Containers
THOMAPLAST®-Centrifuge Tube made of PP „Micro“ Product specification
• Made of PP (polypropylene), type Eppendorf®, in solid, clean design with retaining tape at the lid, heat resistant to +130 °C, sterilized • Thin-walled lid section for perforation
THOMAPLAST®-Test Tube made of PP with stopper or label Product specification
• Translucent cylindrical or conical tubes, with stopper made of polypropylene (PP) or label.
Item 60661 60662
Volume ml
Outside Ø mm
Height mm
Cap
Unit piece
Price EURO
1.5 1.5
11 11
40 40
with without
250 250
50.00 50.00
THOMAPLAST®-Centrifuge Tube made of PTFE round bottom, without rim
Item
Volume Outside Ø Height ml mm mm
609381
3
12
55
609321
10
16
100
609331
10
16
100
Design
Unit piece
Price EURO
250
50.00
250
75.00
250
75.00
cylindrical, with stopper cylindrical, with stopper conical, with stopper
RCT®-Accessories: Stopper made of PE with Colour Code for Test Tubes
Item
ml
Outside Ø mm
12051 60222 12052 12053
7 12 28 50
12 16 24 34
Item 60931 60932 60933 60934 60937 60940 60921 60922 60923 60924 60925 60929
Outside Ø mm
Colour
Unit piece
Price EURO
12 12 12 12 12 12 16 16 16 16 16 16
blue white yellow red brown pink blue white yellow red green violet
250 250 250 250 250 250 250 250 250 250 250 250
25.00 25.00 25.00 25.00 25.00 25.00 50.00 50.00 50.00 50.00 50.00 50.00
Volume
Wall thickness mm
Height
Unit
Price
mm
piece
EURO
1 1 2 2.5
100 100 100 100
1 1 1 1
40.00 42.00 48.00 64.00
Test Tube Racks and Desiccators THOMAPLAST®-Sample Tube Rack made of PC Product specification
• Unbreakable and impact-resistant racks made of crystal-clear polycarbonate, for storing of cylindrical sample tubes up to 25 mm Ø in numbered positions. Excellent stability and resistance to water, aqueous salt solutions and acids, suitable for placing in water baths, e.g. for derivatization of analytical samples etc. Scratch-proof, non-porous surface, dirt-repellent and easy to clean. Allows non-slip stacking up to 100 mm height even when filled with tubes.
30 THOMAPLAST® I - 2015
Laboratory Plastics - Test Tube Racks and Desiccators
Containers
THOMAPLAST®-Sample Tube Rack made of PP Product specification
• Unbreakable and impact-resistant racks made of chemical-resistant, opal-white polypropylene, for storing of cylindrical sample tubes up to 30 mm Ø in numbered positions. Scratchproof, non-porous surface, dirt-repellent, easy to clean, and autoclavable. Allows non-slip stacking up to 100 mm height even when filled with tubes.
Item 83252 83253 83255
Number of places
Dimensions LxWxH mm
72 40 40
234 x 113 x 108 270 x 112 x 133 322 x 127 x 133
Suitable for Unit Ø tubes mm piece 10 - 13 13 - 16 21 - 25
1 1 1
Price EURO 76.00 76.00 76.00
THOMAPLAST®-Test Tube Rack made of LDPE
Item
83247 83248 83249 83250 83251
Number of places
Dimensions LxWxH mm
72 40 40 40 24
229 x 111 x 130 263 x 111 x 130 263 x 111 x 130 318 x 111 x 130 292 x 111 x 130
Suitable for Unit Ø tubes mm piece 11 - 13 13 - 16 16 - 20 21 - 25 26 - 30
1 1 1 1 1
Price EURO 44.00 46.00 46.00 57.00 57.00
THOMAPLAST®-Desiccator made of PP/PC Item 60734 60735
Number of places
Dimensions LxWxH mm
Ø tubes
Unit
Price
mm
piece
EURO
12 24
190 x 60 x 80 375 x 65 x 85
21 21
1 1
25.00 50.00
THOMAPLAST®-Test Tube Rack made of PVC
Product specification
• Conventionally built desiccator with a bottom made of polypropylene and an easily removable flat-domed top made of fully transparent polycarbonate, with ribbed knob. • The bottom can be filled with a desiccant. The material to be dried is placed on the perforated plate made of PP. The cover seals with an O-ring made of Neoprene®. • Large interior volume, low weight, unbreakable and implosion-proof. Temperature-loadable up to +120 °C, not suited for working with organic solvents. • Available in 2 designs The design with cock: A laterally joined stopcock with lubrication-free PTFE-plug for air entrance can be connected with a 1/4“ (6.3 mm) vacuum tubing. The desiccator is additionally vacuum-tight for 24 h at +20 °C under 29.9“ Hg (759 mm).
Item
Design
60952 for 20 test tubes up to 12 mm Ø 60953 for 20 test tubes up to 18 mm Ø 60954 for 40 test tubes up to 12 mm Ø
Dimensions LxWxH Price mm EURO 120 x 110 x 65 140 x 120 x 65 240 x 110 x 65
43.00 43.00 54.00
THOMAPLAST® I - 2015 31
Laboratory Plastics - Test Tube Racks and Desiccators Item
Design
I-Ø
Ø O-Ø Clearance Outside Price disc above height plate mm mm mm mm mm EURO
94020 with cock 149 94022 with cock 197 94024 with cock 240 94026 without cock 150 94027 without cock 200 94028 without cock 240
140 190 230 140 190 230
171 230 273 171 230 273
121 157 197 121 157 197
206 260 311 206 260 311
108.00 136.00 151.00 59.00 79.00 113.00
THOMAPLAST®-Desiccator made of PC
Containers Item
Ø disc mm
Unit piece
Price EURO
140 190 230
1 1 1
27.00 35.00 41.00
94035 94036 94037
RCT®-Accessories: Desiccating Cartridge Application area
• Desiccant in desiccators • Air conditioning in microbalances • Air conditioning of sensitive optical devices
Product specification
Product specification
• Conventionally built desiccator made of strong, fully transparent polycarbonate. Easily removable flat-domed top with ribbed knob and laterally joined 1/4” stopcock for evacuation. Stable bottom with non-skid fitted perforated plate made of 3.2 mm thick polypropylene. Vacuum-tight seal not requiring grease with O-ring made of Neoprene®. Large interior volume, low weight and unbreakable. Temperatureloadable up to +120 °C, not suited for working with organic solvents.
• Active but chemically inert silica gel for water absorption, capsulated in a shatterproof fibre-reinforced polyester cartridge with gaspermeable fine-perforated Mylar®-cover. Highly effective due to large surface of the gel beads. Blue/red colour indicator for indication of the exhaustion degree. Regeneration at +150 °C in a drying cabinet. Ready for immediate use. Available in three different sizes, preferably for THOMAPLAST®-vacuum desiccators, item 83273 to 83275 as well as 94020, 94022, and 94024.
Item 83273 83274 83275
Volume I-Ø
Ø disc
l
mm
mm
O-Ø Clearance Outside Price above height plate mm mm mm EURO
2.1 4.7 8.9
149 197 240
140 190 230
171 230 273
121 157 197
206 260 311
Item 83279 83280 83281
158.00 226.00 289.00
RCT®-Accessories: Desiccator disc made of PP
Outside Ø mm
For desiccator Ø mm
Weight
Unit
Price
g
piece
EURO
114 197 238
up to 160 up to 200 up to 250
230 680 1,360
1 1 1
54.00 96.00 164.00
Cases, Trays, Bowls, Pails and DEWAR-Vessels
Product specification
• Disc made of polypropylene. • Usable up to a max. of +120 °C.
THOMAPLAST®-Drawer Tray made of PVC Product specification
• Type I: Contains 9 compartments for small flasks of 25 mm Ø. For storage of blood samples, chemical analysis samples, coagulation substances etc. • Type II: Tray with 12 compartments allows separately arranging small accessory parts in the drawer, such as standard stoppers, bottle stoppers, capsules etc. • Type III: With 5 cavities of different sizes for pipettes, thermometers, connectors etc.
32 THOMAPLAST® I - 2015
Laboratory Plastics - Cases, Trays, Bowls, Pails and DEWAR-Vessels
Containers
Item
Volume Inner dimension Outer dimension Unit Price of base LxW of rim LxWxH l mm mm piece EURO
40039 40040 40041 40042 40043 40044 Item 60730 60731 60732
0.5 1.5 3 10 21 39
130 x 180 180 x 240 240 x 300 300 x 400 400 x 500 500 x 600
180 x 230 x 42 250 x 310 x 65 310 x 370 x 75 420 x 520 x 120 534 x 634 x 140 648 x 846 x 160
3 3 2 1 1 1
30.00 48.00 46.00 39.00 54.00 75.00
Type
Dimensions LxWxH mm
Unit piece
Price EURO
THOMAPLAST®-Lab Storage Container made of PP
I II III
300 x 355 x 45 300 x 410 x 65 300 x 410 x 70
1 1 1
64.00 74.00 68.00
Product specification
• Particularly suitable for chemicals or for use as water bath and storage container. In shatterproof chemical-resistant design. Usable up to +90 °C.
THOMAPLAST®-Pipette Tray Rack made of PVC Product specification
• Suitable for all lab drawers
Item
Item 60733
Dimensions LxWxH mm
Unit piece
Price EURO
420 x 300 x 40
1
49.00
61043 61044 11612 11613 11614 11615
Dimensions LxWxH (inside) mm
Wall thickness mm
Price EURO
220 x 120 x 120 250 x 150 x 150 300 x 160 x 160 300 x 220 x 220 350 x 250 x 160 420 x 280 x 260
5 5 5 5 5 5
150.00 153.00 159.00 183.00 176.00 199.00
THOMAPLAST®-Experimental Tray made of PP
RCT®-Accessories: Flat Cover with Handle made of PP
Product specification
Product specification
• Experimental tray made of shatterproof, surface-polished polypropylene (PP). Rounded edge. • Temperature-resistant from -20 to +135 °C, sterilizable. • Suitable for food. • Tray is also available made of electrically conductive polypropylene (explosion protection and semiconductor technology resp.).
• Suitable for lab storage containers made of PP. • Usable up to +90 °C. • Cover-thickness: 10 mm
Item 61093 61094 61095
For item
Unit piece
Price EURO
61043 61044 11612
1 1 1
46.00 49.00 54.00
THOMAPLAST® I - 2015 33
Laboratory Plastics - Cases, Trays, Bowls, Pails and DEWAR-Vessels Item
Containers
For item
Unit piece
Price EURO
THOMAPLAST®-Chemical Bowl made of PP
11613 11614 11615
1 1 1
58.00 64.00 70.00
• Chemical bowl made of polypropylene (PP) for transport of reagent containers as well as solid and liquid chemicals. An indispensable tool due to its resistance to inorganic and organic compounds.
61096 61097 61098
Product specification
THOMAPLAST®-Staining Box made of PFA Product specification
• Staining box with cover for slides of 25 x 75 mm size
Item
Item 72549
Dimensions LxWxH mm
Colour
Price EURO
39 x 83 x 19
nature
106.00
THOMAPLAST®-Reaction Pan made of PFA
Dimensions mm
Height mm
Unit piece
Price EURO
160 200 240 280 320 360 400
70 80 100 120 130 150 180
3 2 2 2 2 2 2
27.00 21.00 27.00 35.00 45.00 47.00 54.00
28653 28654 28655 28656 28657 28658 28659
THOMAPLAST®-Chemical Pail made of LDPE
Product specification
• Chemical pail made of very strong LDPE (white) with bail made of metal. • A stable grip edge in the pail bottom allows safe pouring through wide spout. • Prominent liter scale permits easy control of volume.
Item 72548
Dimensions LxW mm
Colour
Price EURO
25 x 101
nature
59.00
THOMAPLAST®-Lab Pan made of PFA
Item 40009 40011
Volume l
Height mm
Outside Ø mm
Colour
Unit piece
Price EURO
10 15
280 340
290 320
white white
1 1
40.00 55.00
THOMAPLAST®-Packaging Bucket made of PP Product specification
Item 72550
Volume ml
Dimensions LxWxH mm
Colour
Price EURO
700
150 x 100 x 50
nature
139.00
34 THOMAPLAST® I - 2015
• Bucket made of white polypropylene (PP) for transport, packaging and storage of various substances • Especially suitable for food and building materials, and non-aggressive chemicals in the environment and hospitals with tightly closing cover • A strong metal handle with the lock on the bucket guarantees product safety
Laboratory Plastics - Cases, Trays, Bowls, Pails and DEWAR-Vessels
Containers
Technical specification
• Inside: 360 x 270 x 100 mm • Outside: 420 x 330 x 130 mm • Sidewall thickness: 20 mm Item
Volume l
Colour
Unit piece
Price EURO
10 10
red black
1 1
213.00 213.00
41006 41007
Item 40013 40014 40015 40016 40017 40018 40019 40020 40021 40022
Volume l
Height mm
Outside Ø mm
Unit piece
Price EURO
1 1 2 2 3 3 5 5 10 10
131 131 132 132 132 132 194 194 263 263
132 132 175 175 225 225 225 225 268 268
5 10 5 10 5 10 5 10 5 10
29.00 44.00 40.00 60.00 58.00 86.00 61.00 90.00 80.00 120.00
THOMAPLAST®-Ice Bucket made of Foamed PVC Product specification
• For taking up of dry ice or flake ice and freezing mixtures, liquid nitrogen and heating baths. Temperature range of -200 to +80 °C. Due to their favourable properties they are used in many labs and serve as containers for ice or freezing mixtures to cool reactions or biochemical systems. Completely smooth and liquid-tight at the surface, inside porous and heat-insulating, light-weighted, unbreakable and flexible but dimensionally stable, of good chemical resistance.
THOMAPLAST®-Ice and Cooling Tray Application area
• For safe and clean deposition as well as the transport of lab glass, lab and analytical samples, chemical storage containers, instruments, fittings and tools. Also for use as damage tray in technical, chemical, and radiochemical pilot plants or as trough for etching and cooling baths.
Product specification
• Splatterproof rectangular tray with high edge made of foamed, temperature-insulating and polyvinylchloride (PVC), jointless moulded in one piece, walls slightly inclined, rounded corners and edges, molded-in continuous grip bead. Non-porously densified, smooth, scratch- and impact-resistant, easy to clean surface, hygienic, odourless and flavourless, free of water-leachable components. Resistant to many chemicals and additives, such as salts and salt solutions, also to cyanide and bichromate solutions, photo chemicals, mineral and silicone oils, vegetable and animal oils, alcohols and glycols, petrol, diesel, formaldehyde, acetone, mercury, accu acids, sulfuric acid, chromosulfuric acid, nitric acid up to 50 %, alkalis, hydrogen peroxide, dry ice, liquid nitrogen etc. • Not resistant to aromatic solvents except benzyl alcohol, halogenated solvents, esters and tetrahydrofuran (THF), temperature-resistant from -196 to +95 °C.
Item 940001
Volume l
Outside Ø mm
Height mm
Colour
Price EURO
5
280
190
black
95.00
THOMAPLAST®-DEWAR-Vessel made of XLPE Plastic Product specification
• The first shatterproof DEWAR vessel made of plastic for working in the low-temperature range. The double walls are made of new crosslinked polyethylene (XLPE-plastic) being resistant to thermic shock up to -196 °C. The cover is made of expanded polystyrene with vent. The Dewar vessel features outside moulded-in ribs for stability and a convenient plastic-coated bail-type handle except the 10 liter vessel. • Temperature range: -196 to +100 °C. • The vessel should be well cooled before putting it into operation!
THOMAPLAST® I - 2015 35
Laboratory Plastics - Scoops, Spoons, Spatulas and Tweezers Item
Volume
l
Dimensions ØxH (inside) mm
95051 95052 95054 95055
1 2 4 10
95 x 195 125 x 225 165 x 290 205 x 380
Laboratory Instruments
Price
THOMAPLAST®-Scoop made of HDPE
mm
EURO
Product specification
230 290 355 470
195.00 295.00 295.00 346.00
Height
• Natural colouring and conical in shape with tapered filling edge.
Laboratory Instruments Scoops, Spoons, Spatulas and Tweezers THOMAPLAST®-Sample Spatula - sterile
Item
Product specification
• Sterile spatula for direct sampling out of bags without contamination. • Permanent handle. • Sturdy edges break up any caked material.
60637 60638 60640 60641 60642 60643 60644
Volume ml
Length mm
Unit piece
Price EURO
15 25 110 150 350 500 1,000
115 135 210 250 310 350 400
3 3 3 3 2 2 2
12.00 15.00 15.00 15.00 14.00 20.00 32.00
THOMAPLAST®-Metering Scoop made of PP Product specification
Item 60402
Volume ml
Length mm
Unit piece
Price EURO
36
230
20
72.00
• Unbreakable scoops made of polypropylene (PP) with flat, beveled edge and reinforced handle. Volume marking well visible on the handle. Sterilizable up to +130 °C, chemical-resistant.
THOMAPLAST®-Sample Spoon - sterile Product specification
• For drawing of small amount of sample material. • The long handle allows drawing of samples in depth without hazard of contamination of the hand. • Made of styrene, sterile and individually packaged.
Item
Item 60404 60405 60406 60407
Volume ml
Length mm
Unit piece
Price EURO
1.2 2.5 5 15
180 180 180 180
50 50 50 50
150.00 150.00 150.00 150.00
36 THOMAPLAST® I - 2015
40549 40550 40551 40552 40553 40554 40555 40556 40557 40558 40559 40560 40561 40562
Volume ml
Length mm
Width mm
Unit piece
Price EURO
2 2 5 5 10 10 25 25 50 50 100 100 250 250
60 60 82 82 100 100 135 135 160 160 200 200 260 260
15 15 24 24 34 34 44 44 55 55 70 70 90 90
12 24 12 24 12 24 12 24 12 24 6 12 6 12
18.00 36.00 24.00 36.00 24.00 36.00 36.00 60.00 48.00 72.00 45.00 60.00 66.00 102.00
Laboratory Plastics - Scoops, Spoons, Spatulas and Tweezers Item
Volume ml
Length mm
Width mm
Unit piece
Price EURO
500 500 1,000 1,000
315 315 385 385
118 118 134 134
3 6 1 3
48.00 69.00 21.00 48.00
Laboratory Instruments
THOMAPLAST®-Tweezers made of Nickel-Plated Forged Steel - PTFE-Coated
40563 40564 40565 40566
THOMAPLAST®-Scraper made of PP Product specification
• Very sturdy, unbreakable, chemical-resistant scraper made of polypropylene (PP), sterilizable up to +121 °C, colour: white.
Item 60473 60474 60475 60476
Design
Length of PTFE coating mm
Unit
Price
piece
EURO
straight point straight point straight point serrated and curved point
38 19 98 98
2 2 2 2
38.00 36.00 49.00 47.00
THOMAPLAST®-Tweezers made of POM Item 11768 11769
Length mm
Width mm
Unit piece
Price EURO
205 250
75 110
2 2
35.00 40.00
Product specification
• Made of POM (polyoxymethylene) • Yellow, blunt, elastic, very good resilience.
THOMAPLAST®-Sieve with Perpendicular Handle made of PFA Product specification
• Sieve with long handle (approx. 18 cm) and suspension device. Optionally different mesh sizes (0.5 and 1.0 mm resp.); for cups with an internal diameter up to 7.6 cm.
Item 60633 60634 60635 60636
Item 72556 72557
Mesh size µm
Dimensions ØxH mm
Price EURO
500 1,000
19 x 64 19 x 64
108.00 108.00
Length mm
Unit piece
Price EURO
115 145 180 250
3 3 2 2
12.00 12.00 13.00 17.00
THOMAPLAST®-Tweezers made of PTFE with blunt ends Product specification
• Completely metal-free tweezers with blunt ends. Electrically nonconducting, chemical-resistant, free of leachable components and biocompatible; temperature-resistant from -200 to +260 °C, sterilizable with all commonly used methods.
THOMAPLAST® I - 2015 37
Laboratory Plastics - Scoops, Spoons, Spatulas and Tweezers
Laboratory Instruments
Pestles and Mortars THOMAPLAST®-Pestle for microcentrifuge tubes Application area
• Resuspending, homogenizing, dissolving of small and smallest material quantities without losses in microcentrifuge tubes.
Product specification Item
Length mm
Unit piece
Price EURO
100 150 200
1 1 1
45.00 60.00 66.00
47942 47943 47944
• Conical PTFE body, fitting into THOMAPLAST®-microcentrifuge tubes, item 60661 and 60662 resp., with precisely centred stainless steel shaft (143 x 3.2 mm), for manipulations by hand or with motor actuator.
THOMAPLAST®-Spatula made of Chromium Nickel Steel with PTFE Coating
Item
Unit piece
Price EURO
1
80.00
83270
THOMAPLAST®-Pestle / Mortar Product specification Item
Design
Length Unit Price mm piece EURO
60259 one flat end, one spoon end 60258 double flat ends 60257 both sides leaf-shaped (Hayman Style) 60253 tapered pallet (hardwood handle)
225 200 150 150
1 1 1 1
• Made of melamine, white.
64.00 36.00 39.00 61.00
THOMAPLAST®-Crucible Tong with PTFE Coating
Pestles Item 60665 60666 60667 60668 Item
Length
mm
Length of PTFE coating mm
60256
240
75
38 THOMAPLAST® I - 2015
Price
Mortars
piece
EURO
1
51.00
Item
Unit
60663 60664
Ø flask mm
Length mm
Weight g
Unit piece
Price EURO
30 35 40 42
125 145 160 245
55 85 120 175
1 1 1 1
26.00 26.00 31.00 57.00
Volume ml
Outside Ø mm
Height mm
Unit piece
Price EURO
300 500
125 150
75 90
1 1
21.00 23.00
Laboratory Plastics - Precision Knives and Scalpels
Laboratory Instruments
Technical specification
Precision Knives and Scalpels
• Material scalpel-style knife: blade: stainless steel handle: aluminium • Material pen-style knife: blade: stainless steel blade holder: aluminium, handle: plastic
THOMAPLAST®-Mini Precision Knife with Pointed Blade - ground on one side
Product specification
• Knife handle made of aluminum. • Precision blade made of stainless steel, very pointed. • Replacement of blades by loosening the grip head.
81170 / 81174
81171
Item
Item 81168 81169
Design
Unit piece
Price EURO
precision knife replacement blade
2 10
24.00 20.00
81170 81174 81171
Design
Unit piece
Price EURO
knife, mini scalpel-style knife, pen-style replacement blade
3 1 1
24.00 12.00 2.00
Design
Unit piece
Price EURO
precision knife replacement blade
2 10
26.00 20.00
THOMAPLAST®-Super Precision Knife for Particularly Fine Cuts Product specification
THOMAPLAST®- Mini Precision Knife with Pointed Blade - ground on three sides
• Exchangeable blade
Product specification
• Knife with retractable, three-sided ground blade • Handle and blade holder made of stainless steel • Precision changeover blade made of stainless steel • With clip
Item 81182 81183 Item 81172 81173
Design
Unit piece
Price EURO
precision knife replacement blade
3 10
36.00 20.00
THOMAPLAST®-Scalpel made of Steel
THOMAPLAST®-Precision Knife with Curved Blade Product specification
• Precision knife as scalpel-style knife (mini-precision knife) or as penstyle knife available • Scalpel-style knife: replacement of blades by loosening the cone • Pen-style knife: with clip
81165
THOMAPLAST® I - 2015 39
Laboratory Plastics
Metering Facilities and Metering Devices
Product specification
Item
• Handle made of steel, forged and chromium plated • Exchangeable blade • Suitable for heavy-duty applications Item
Scalpel blade No.
Unit piece
Price EURO
21 24 25
2 2 2
32.00 32.00 32.00
81165 81166 81167
40838 40899 81041 81042 81043
Volume ml
Length mm
Unit piece
Price EURO
5 10 25 50 100
330 440 460 470 610
3 3 1 1 1
63.00 72.00 64.00 69.00 136.00
THOMAPLAST®-Pipette Suction Bulb made of NR Product specification
Metering Facilities and Metering Devices
• Pipette suction bulb made of natural rubber (NR) for pipettes of all sizes.
THOMAPLAST®-Pipette made of HDPE Product specification
• For use as suction and metering pipette. • When filled, the pipette is not self-discharging. • Resistant to acids and solvents.
Item 40270 40271 40272 40273 Item 61129 61130
Volume ml
Length mm
1.5 5
135 195
Graduation Unit ml piece 0.5 1
50 50
Price EURO 40.00 45.00
THOMAPLAST®-Universal Bulb Pipette made of PP Product specification
Colour
Unit piece
Price EURO
red red transparent transparent
30 50 30 50
27.00 30.00 27.00 30.00
THOMAPLAST®-Squeeze-Bulb Pipette Filler made of NR Product specification
• Pipette filler made of natural rubber (NR) for any application area. The fillers are resistant to chemicals. Carefully chosen plastics avoid sticking and brittling. • The standard types (DNV 1) are suited for pipettes up to 10 ml. For pipettes with volumes exceeding 10 ml the universal model (DNV 2) has to be used.
• Volumetric pipette made of polypropylene (PP). • Transparent, permanently coloured ring mark (blue) and marking. • Temperature resistant: up to +70 °C, at higher temperatures a volume change occurs.
Item 40836 40837
Volume ml
Length mm
Unit piece
Price EURO
1 2
300 300
3 3
39.00 48.00
40 THOMAPLAST® I - 2015
Item
Type
Unit piece
Price EURO
28645 28647
DNV1 DNV2
1 1
30.00 35.00
Laboratory Plastics
Metering Facilities and Metering Devices
THOMAPLAST®-Macro Pipetting Aid Product specification
• The temperature-resilient plastic coating helps the entire device to resist breakage and glass fragments are confined within the sheath. • Material: burette of borosilicate glass 3.3, burette stopcock PMP/PTFE.
• Suction by means of a macro volume suction bellows, one stroke of the bellows amounts to 50 ml. • Control: Adjustment of the meniscus and dispensing (free discharge) is effected by a control lever. • In case of blow-out pipettes the ”blow-out function” is activated by pressing the blow-out bellows. • For use with volumetric, measuring and blow-out pipettes made either of glass or plastics with a volume range of 0.1 to 100 ml. • A hydrophobic membrane filter protects the pipetting system against entering liquid. • Pipetting aid end adapter and protection filter can be steam sterilized up to +121 °C, 20 min. • Low weight: approx. 95 g. • Accessory: Pipetting suction bellows item 40879 (www.rct-online.de).
Item 28681 28682
Volume ml
Graduation ml
Length mm
Unit piece
Price EURO
50 25
0.1 0.05
800 800
1 1
95.00 80.00
THOMAPLAST®-Burette Clamp made of PP - double Product specification
• For support rods 8-14 mm Ø
Item 40883
Unit piece
Price EURO
1
87.00
RCT®-Accessories for Pipette
Item
Max. number of burettes
Unit piece
Price EURO
2
1
50.00
60779
THOMAPLAST®-Variable Volume Dispenser made of PE Product specification Item
For item
Design
Unit Price piece EURO
81079 58694-98 + 58708-09 pipette tip 81080 58699-703 + 58710-12 pipette tip 12068 58704-07 + 58713 pipette tip 58715 58714 pipette tip 58716 58714 protection filter (fibre)
500 100.00 500 100.00 500 100.00 100 50.00 100 50.00
• Storage bottle with capacity of 0.25 l and 0.5 l resp. and tightly screwable measuring chamber, both made of unbreakable, physiologically safe and chemically inert polyethylene, for clean and rapid metering of adjustable volumes from 5 to 50 ml. Free of extractable components, suitable for organic reagents, scintillation solutions, buffers, solvents, alkalis and acids, except concentrated sulfuric and nitric acid.
THOMAPLAST®-Safety Volumetric Burette with Schellbach Stripes Product specification
• Plastic-coated burette made of borosilicate glass 3.3. Class B. Conformity with DIN ISO 384. With Schellbach stripes (blue/white) and easily readable black scaling. Calibrated to deliver ,Ex’. The stopcock of the burette turns easily and allows fine titration.
THOMAPLAST® I - 2015 41
Laboratory Plastics
Metering Facilities and Metering Devices
• Slightly squeezing the handy storage bottle forces the liquid to be metered through the fill tube of the metering chamber into the measuring vessel. Overfill is sucked back into the bottle when pressure is released. The metered liquid can be poured off the measuring vessel without problems. • The required volume is adjusted by moving the fill tube. Item
Capacity bottle ml
Capacity measuring vessel ml
piece
EURO
250 500
25 50
2 2
40.00 42.00
12069 83260
Unit
Price
Item
THOMAPLAST®-Titration Apparatus
60240 60241 60242 60243 60244 60245 60246 60247
Product specification
• Automatic burette acc. to Dr. Schilling with pushbutton dispenser and microscrew, which facilitates precise titration. Rapid filling of the burette by squeezing the polyethylene bottle. Automatic self-zeroing. Alternatively available with screw cap for adjustable zeroing or firmly melted-in adjustable zero point. With blue scale, better than class B, extremely resistant to acids, alkalis and solvents. The blue graduation allows optimal reading and is made of self-coloured melted-on glass. The surface of the glass burette is not hurt - decreased risk of breakage. Rapid pre-titration with pushbutton until just before reaching the indicator transition, precise titration with microscrew.
Length mm
Outside Ø mm
Unit piece
Price EURO
100 150 200 250 300 350 400 600
6 6 6 6 6 6 6 6
1 1 1 1 1 1 1 1
30.00 33.00 34.00 40.00 44.00 51.00 60.00 129.00
THOMAPLAST®-Stirring Spatula made of PTFE
Item 60866 60867 60868 60869 60870
Capacity burette ml
Graduation Accuracy
5 10 15 25 50
ml
ml
Capacity bottle ml
0.05 0.05 0.1 0.1 0.1
±0.015 ±0.030 ±0.045 ±0.045 ±0.060
500 500 500 1,000 1,000
Stirring and Mixing Stirrers and Stirring Devices THOMAPLAST®-Stirring Bar made of PTFE Product specification
• PTFE coated steel core with round ends. • Can be bent as required; the shape is permanently retained.
42 THOMAPLAST® I - 2015
Price EURO 92.00 92.00 92.00 92.00 98.00
Item 60249 60250 60251
Length mm
Width mm
Unit piece
Price EURO
120 150 180
16 16 16
1 1 1
20.00 21.00 25.00
THOMAPLAST®-Stirrer made of PP - round blades Product specification
Shaft mounted stirrer made of steel with PP coating. Stirrer blades made of PP. Two blades in different sizes (A and B) spreading at rotation: • A: Width of blades when completely spreaded: 60 mm. Stirrer shaft Ø: 8 mm. Length: approx. 350 mm. Fits through a bottle neck of 26 mm Ø. • B: Width of blades when completely spreaded: 100 mm. Stirrer shaft Ø: 8 mm. Length: approx. 350 mm. Fits through a bottle neck of 29 mm Ø.
Laboratory Plastics - Stirrers and Stirring Devices Item 60835 60836
Stirring and Mixing
Blade width mm
Ø bar mm
Ø neck mm
Length
Unit
Price
mm
piece
EURO
60 100
8 8
26 29
350 350
1 1
39.00 39.00
THOMAPLAST®-Stirrer made of PP - propeller Application area
• Stirring and mixing of low viscous and corrosive media, particularly for preparation of suspensions and emulsions.
Product specification
Item 12064 961161 96118 961172
• Shaft mounted stirrer with precisely centred, polypropylene-coated steel shaft and three slightly staggered cloverleaf-shaped, fixed and sturdy stirrer blades. Low resistance and high efficiency.
1
Design
For jars ml
Inside Ø mm
Unit piece
Price EURO
triangular triangular, long half-round, long half-round
>= 3 >= 5 >=10 >=20
8 10 13.5 15
1 1 1 1
17.00 20.00 23.00 23.00
only for conical jars
2
only for round jars
THOMAPLAST®-Magnetic Stirring Bar made of PTFE Standard Product specification
• Stirring bars with permanent-magnetic core, PTFE-coated, without pivot ring, non-contaminating.
Item 83292
Length mm
Blade width mm
Ø bar mm
Unit piece
Price EURO
350
60
8
2
85.00
THOMAPLAST®-Stirring Bar Retriever made of PTFE Product specification
• With magnetic core, sturdy design and temperature-resistant up to +275 °C.
Item
Item 61138 61139 61140 61141
Length mm
Magnet-Ø mm
Bar-Ø mm
Unit piece
Price EURO
150 250 300 350
10 10 10 10
8 8 8 8
1 1 1 1
25.00 27.00 28.00 30.00
THOMAPLAST®-Magnetic Stirrer made of PTFE for Tubes Product specification
• For small centrifuge tubes and reaction cups • Triangular shape
40676 40677 40678 40679 40680 40681 40682 40683 40684 40685 40686 40687 40688 40689 40690 40691 40692 40693 40694 40695
Length mm
Outside Ø mm
Unit piece
Price EURO
2.4 3 5 6.3 7 8 8 10 10 13 15 15 15 20 25 30 35 40 45 50
2.4 3 2 3 2 2 3 3 6 3 4.5 2 6 6 6 6 6 8 8 8
3 3 3 3 3 3 4 3 5 3 5 2 5 5 5 5 4 4 3 3
21.00 21.00 24.00 24.00 27.00 27.00 30.00 24.00 25.00 30.00 34.00 28.00 34.00 35.00 33.00 36.00 36.00 36.00 36.00 33.00
THOMAPLAST® I - 2015 43
Laboratory Plastics - Stirrers and Stirring Devices Item 40696 40697 40698 961091 961092
Stirring and Mixing
Length mm
Outside Ø mm
Unit piece
Price EURO
60 70 80 108 159
9 9 10 27 27
2 2 2 1 1
30.00 30.00 31.00 164.00 195.00
Item 40666 40667
Length mm
Outside Ø mm
55 80
14 17
Edge length Unit mm piece 15 16
2 1
Price EURO 36.00 27.00
THOMAPLAST®-Laboratory Magnet Stirrer Product specification
THOMAPLAST®-Magnetic Stirring Bar made of PTFE highly resistant Product specification
• With highly resistant coating for concentrated acids, dyes etc.
• Large and flat work surfaces, which are easy to clean • Compact, space-saving design • Automatic start-up for safe acceleration of the stirring bar • Adjustable stirring power, regardless of the speed control • User-friendly control by rotary knob
Technical specification
• Speed: 130 - 1200 rpm • Stirring volume: up to 3 l • Stirring power: up to 5 W • Protection class: IP 32 • Environmental temperature: -10 to +40 °C • Dimensions: 180 x 215 x 35 mm (W x D x H) • Power pack: 230 V • Weight: 1.4 kg
Item 961011 961012 961014 961016
Length mm
Outside Ø mm
Unit piece
Price EURO
22 13 25 38
6 9.5 9.5 9.5
1 1 1 1
18.00 18.00 18.00 23.00 Item
THOMAPLAST®-Magnetic Stirring Bar made of PTFE - triangular
17995
Dimensions mm
Unit piece
Price EURO
180 x 215 x 35
1
544.00
Product specification
• Triangular stirring bars with permanent-magnetic core, PTFE-coated.
Drying Tubes, Gas Sampling Bulbs and Accessories THOMAPLAST®-Drying Tube made of LDPE Product specification
• For filling with silica gel or other hygroscopic materials. With 2 tubing adapters made of polypropylene (PP) for tubing of internal diameters of 7-10 mm.
Item 40659 40660 40661 40662 40663 40664 40665
Length mm
Outside Ø mm
12 20 25 25 35 40 50
8 8 8 14 10 14 12
44 THOMAPLAST® I - 2015
Edge length Unit mm piece 6 8 8 15 10 15 12
3 3 3 3 3 3 3
Price EURO 18.00 21.00 21.00 36.00 24.00 39.00 36.00
Laboratory Plastics - Drying Tubes, Gas Sampling Bulbs and Accessories Item
Outside Ø mm
Length mm
Unit piece
Price EURO
21 21 21
100 150 200
12 12 12
48.00 54.00 60.00
61368 61369 61370
Item 47945 47946 47947
Stirring and Mixing Volume Pore size For tubing Height Unit outside Ø ml µm mm mm piece 250 500 1,000
3 3 3
6 6 8
175 200 240
1 1 1
Price EURO 459.00 613.00 693.00
THOMAPLAST®-Gas Sampling Bulb made of PP Product specification
• Shut-off valve made of polypropylene with free-turnable cock made of PTFE. • Connections for tubing of internal diameter of 6.4 to 9.5 mm. Tube neck Ø: 51 mm Tube length: 222 mm Shut-off valve: 64 mm • In three types: Shut-off valve on both ends with bore Ø: 4 mm. Shut-off valve at one end and silicone rubber septum mounted in screw fitting on the other end. Septum can withstand several injections. 6 septa included. Shut-off valve with bore Ø: 4 mm at one end, three-way cock at the other end.
Laboratory Stoppers and Caps Laboratory Stoppers THOMAPLAST®-Stopper made of NR Product specification
• Flexible, well tightening design • Relatively resistant to most organic solvents, chemically neutral, nontoxic, resistant to ozone, physiologically harmless, floating, resistant to aging.
Technical specification
• Material: NR (natural rubber) • Shore hardness A: 40° ±5° • Colour: red • Temperature range: -40 to +60 °C
Item 60451 60452 60453
Type
Connection type
Unit piece
Price EURO
1 2 3
valves on both sides valve / in-screw fitting with septum valve / three-way cock
1 1 1
156.00 156.00 156.00
THOMAPLAST®-Safety Gas Wash Bottle made of PFA/PTFE Product specification
• Gas wash bottle in shatterproof full plastic version, bottle body made of PFA, tubing connection and frit system made of PTFE. • Chemical-resistant, free of leachable components and biocompatible. • Temperature-loadable, sterilizable with all commonly used methods. • The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread. It can be exchanged.
Item
Ø top mm
Ø bottom mm
Height mm
Colour
Unit piece
Price EURO
40353 40354 61080 40355 61082 61083 40356 61084 61085 40358 61086 40360 61087 40363 61088 40366 61089 40369 40372 40375
6.5 9 9 12 12 13 14.5 15 16 16.5 18 18 20 22 23 24 26 27 29 32
3.5 5 6 8 9 10 10.5 11 12 12.5 13 14 14 17 16 18 19 21 23 26
15 20 18 20 18 18 20 18 20 20 22 20 24 25 26 30 28 30 30 30
grey grey red grey red red grey red red grey red grey red grey red grey red grey grey grey
50 50 50 50 50 50 50 50 50 50 40 50 30 50 20 40 20 30 25 20
25.00 25.00 35.00 30.00 45.00 50.00 35.00 50.00 50.00 45.00 52.00 50.00 42.00 85.00 42.00 88.00 46.00 90.00 80.00 80.00
THOMAPLAST® I - 2015 45
Laboratory Plastics - Laboratory Stoppers
Laboratory Stoppers and Caps
Item
Ø top mm
Ø bottom mm
Height mm
Colour
Unit piece
Price EURO
40378 40381 40384 40385 40386 40387 40388 40389 40390 40391 40392 40393 40394
35 38 44 49 55 59.5 65 70 75.5 83 92 100 107
29 31 36 41 47 50.5 56 60 64.5 71 79 87 94
30 35 40 40 40 45 45 50 55 60 65 65 65
grey grey grey grey grey grey grey grey grey grey grey grey grey
20 15 10 5 5 5 5 3 3 2 2 2 2
100.00 93.00 102.00 62.00 71.00 105.00 117.00 90.00 102.00 80.00 94.00 94.00 96.00
THOMAPLAST®-Stopper made of NR - with bore Product specification
• Flexible, well tightening design • Relatively resistant to most organic solvents, chemically neutral, nontoxic, resistant to ozone, physiologically harmless, floating, resistant to aging.
Technical specification
• Material: NR (natural rubber) • Shore hardness A: 40° ±5° • Colour: grey or red • Temperature range: -40 to +60 °C
Item 40382 40383
Ø top mm
Ø bottom mm
H
Øa
Bores
Unit
mm
38 38
31 31
35 35
Price
mm
piece
EURO
7 7
1 2
15 10
105.00 69.00
THOMAPLAST®-Stopper made of NBR Application area
• Laboratory technology, machine engineering, automobile industry, petrochemistry, container technology, chemical technology
Product specification
• Highest resistance to mineral oils, fats and fuels • Good resistance to weather • Good resistance to aging • Very high abrasion resistance • Good mechanical stability • Heat resistance better than SBR • Low permeability to gas • Special bores on request
Technical specification
• Material: NBR (butadiene-acrylonitrile rubber) • Colour: black • Shore hardness A: 45° ±5° (DIN 53505) • Temperature range: -25 to +100 °C • Hot air resistance: +120 °C • Tolerance: according to DIN 7715 T2 M3
Item Item
Ø top mm
40357 14.5 40359 16.5 40361 18 40362 18 40364 22 40365 22 40367 24 40368 24 40370 27 40371 27 40373 29 40374 29 40376 32 40377 32 40379 35 40380 35
Ø bottom mm
H mm
mm
10.5 12.5 14 14 17 17 18 18 21 21 23 23 26 26 29 29
20 20 20 20 25 25 30 30 30 30 30 30 30 30 30 30
3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6
1 1 1 2 1 2 1 2 1 2 1 2 1 2 1 2
46 THOMAPLAST® I - 2015
Øa
Bores
Unit
Price
piece
EURO
50 50 50 50 40 40 40 30 30 25 25 25 20 20 15 15
50.00 100.00 65.00 100.00 80.00 120.00 96.00 84.00 90.00 100.00 85.00 100.00 100.00 92.00 90.00 90.00
Ø bottom mm
H
Øa
Bores
Unit
Ø top mm
Price
mm
mm
piece
EURO
302467 302468 302471 302472 302473 302474 302475 302476 302477 302478 302479 302480 302481 302482 302483 302484 302485
6.5 6.5 9 9 12 12 14.5 14.5 16.5 16.5 18 18 18 18 22 22 22
3.5 3.5 5 5 8 8 10.5 10.5 12.5 12.5 14 14 14 14 17 17 17
15 15 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25
3 3 3 3 3 3 3 3 4 4 4
1 1 1 1 1 1 2 2 1 1 2
25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25
26.00 36.00 28.00 38.00 36.00 48.00 42.00 56.00 50.00 66.00 62.00 84.00 62.00 84.00 94.00 118.00 94.00
Laboratory Plastics - Laboratory Stoppers Item
Laboratory Stoppers and Caps
Ø bottom mm
H
Øa
Bores
Unit
Price
Ø top mm
mm
mm
piece
EURO
302486 302487 302488 302489 302490 302491 302492 302493 302494 302495 302496 302497 302498 302499 302500 302501 302502 302503 302504 302505 302506 302507 302508 302509 302510 302513 302514 302515 302516 302517 302518 302519 302520 302521 302522 302523 302524 302525 302526 302527 302528 302529 302530 302531 302532 302533 302534
22 24 24 24 24 27 27 27 27 29 29 29 29 32 32 32 32 35 35 35 35 38 38 38 38 44 44 49 49 55 55 59.5 59.5 65 65 70 70 75.5 75.5 83 83 92 92 100 100 107 107
17 18 18 18 18 21 21 21 21 23 23 23 23 26 26 26 26 29 29 29 29 31 31 31 31 36 36 41 41 47 47 50.5 50.5 56 56 60 60 64.5 64.5 71 71 79 79 87 87 94 94
25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 35 35 35 35 40 40 40 40 40 40 45 45 45 45 50 50 55 55 60 60 65 65 65 65 65 65
4 4 4 4 4 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 7 7 7 7
2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2
50 25 50 25 50 25 50 25 50 25 50 25 50 15 30 15 30 15 30 15 30 10 20 10 20 5 10 3 5 3 5 3 5 3 5 3 5 3 5 1 3 1 3 1 3 1 3
118.00 122.00 154.00 122.00 154.00 160.00 204.00 160.00 204.00 198.00 238.00 198.00 238.00 156.00 224.00 156.00 224.00 156.00 224.00 156.00 224.00 172.00 248.00 172.00 248.00 134.00 202.00 102.00 128.00 132.00 168.00 180.00 225.00 230.00 288.00 282.00 346.00 320.00 374.00 130.00 276.00 188.00 394.00 270.00 568.00 382.00 798.00
THOMAPLAST®-Stopper made of Silicone Product specification
• Relatively resistant to most organic solvents, chemically neutral, nontoxic, resistant to ozone, physiologically harmless, floating, resistant to aging.
Technical specification
• Material: silicone • Shore hardness A: 50° ±5° • Colour: transparent • Temperature range: -60 to +180 °C, for a short time up to +260 °C.
Item
Ø bottom mm
H
Øa
Bores
Unit
Ø top mm
Price
mm
mm
piece
EURO
40395 40396 40397 40398 40399 40400 40401 40402 40403 40404 40405 40406 40407 40408 40409 40410 40411 40412 40413 40414 40415 40416 40417 40418 40419 40420 40421 40422 40423 40424 40425 40426 40427 40428 40429 40430 40431 40432 40433 40434
6.5 9 12 14.5 14.5 16.5 16.5 18 18 18 22 22 22 24 24 24 27 27 27 29 29 29 32 32 32 35 35 35 38 38 38 44 49 55 59.5 65 70 75.5 83 92
3.5 5 7 10.5 10.5 12.5 12.5 14 14 14 17 17 17 18 18 18 21 21 21 23 23 23 26 26 26 29 29 29 31 31 31 36 41 47 50.5 56 60 64.5 71 79
15 20 20 20 20 20 20 20 20 20 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 35 35 35 40 40 40 45 45 50 55 60 65
3 3 3 3 4 4 4 4 5 5 6 6 6 6 7 7
1 1 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
50 50 50 50 40 40 40 40 30 30 20 20 20 15 15 15 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 3 3 2 2 2 1 1 1 1
31.00 40.00 49.00 76.00 72.00 79.00 93.00 97.00 81.00 108.00 88.00 108.00 108.00 81.00 94.00 94.00 72.00 75.00 77.00 77.00 90.00 90.00 91.00 91.00 91.00 63.00 67.00 67.00 69.00 72.00 76.00 59.00 72.00 68.00 81.00 99.00 76.00 81.00 106.00 130.00
THOMAPLAST® I - 2015 47
Laboratory Plastics - Laboratory Stoppers Item
Laboratory Stoppers and Caps
Ø bottom mm
H
Øa
Bores
Unit
Ø top mm
Price
Item
mm
mm
40435 40436
100 107
87 94
65 65
piece
EURO
1 1
152.00 171.00
THOMAPLAST®-High-Pharm Stopper made of Silicone for the Food Processing Technology and Pharmaceutical Engineering Application area
• Biotechnology, pharmaceutical engineering, food processing technology, wine business, beverage industry, dairy industry, container technology, laboratory technology
Technical specification
• Material: silicone (silicone rubber) • Colour: translucent • Shore hardness A: 50° ±5° • Temperature range: -60 to +200 °C, for a short period +230 °C • Sterilization: autoclavable (+136 °C) • Tolerance: according to DIN 7715 T2 M3 • Regulations: FDA §177.2600 and BfR XV silicone
Item
Ø bottom mm
H
Øa
Bores
Unit
Ø top mm
mm
mm
piece
EURO
302535 302536 302537 302538 302539 302540 302541 302542 302543 302544 302545 302546 302547 302548 302549 302550 302551 302552 302553 302554 302555 302556
6 6 8 8 9 9 12 12 14.5 14.5 16.5 16.5 18 18 18 18 22 22 22 22 24 24
3 3 4 4 5 5 8 8 10.5 10.5 12.5 12.5 14 14 14 14 17 17 17 17 18 18
15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 30 30
3 3 3 3 3 3 3 3 4 4 4 4 4 4
1 1 1 1 1 1 2 2 1 1 2 2 1 1
25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50
30.00 40.00 30.00 40.00 32.00 42.00 40.00 52.00 46.00 60.00 54.00 74.00 68.00 92.00 68.00 92.00 100.00 144.00 100.00 144.00 132.00 192.00
48 THOMAPLAST® I - 2015
Price
Ø bottom mm
H
Øa
Ø top mm
Bores
Unit
mm
302557 302558 302559 302560 302561 302562 302563 302564 302565 302566 302567 302568 302569 302570 302571 302572 302573 302574 302575 302576 302577 302578 302579 302580 302581 302582 302583 302584 302585 302586 302587 302588 302589 302590 302591 302592 302593 302594 302595 302596 302597 302598 302599 302600 302601 302602 302603 302604 302605 302606
24 24 27 27 27 27 29 29 29 29 32 32 32 32 35 35 35 35 38 38 38 38 41 41 44 44 49 49 55 55 59.5 59.5 65 65 70 70 75.5 75.5 83 83 92 92 100 100 107 107 130 130 170 170
18 18 21 21 21 21 23 23 23 23 26 26 26 26 29 29 29 29 31 31 31 31 34 34 36 36 41 41 47 47 50.5 50.5 56 56 60 60 64.5 64.5 71 71 79 79 87 87 94 94 100 100 120 120
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 35 35 35 35 35 35 40 40 40 40 40 40 45 45 45 45 50 50 55 55 60 60 65 65 65 65 65 65 85 85 130 130
Price
mm
piece
EURO
4 4 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 7 7 7 7
2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2
25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 20 10 20 5 10 5 10 5 10 5 10 3 5 3 5 1 3 1 3 1 3 1 3 1 3 1 3
132.00 192.00 170.00 246.00 170.00 246.00 138.00 202.00 138.00 202.00 164.00 278.00 164.00 278.00 148.00 220.00 148.00 220.00 196.00 294.00 196.00 294.00 118.00 170.00 132.00 192.00 80.00 116.00 106.00 160.00 142.00 205.00 184.00 264.00 155.00 180.00 162.00 193.00 56.00 134.00 77.00 184.00 94.00 248.00 129.00 328.00 194.00 543.00 347.00 925.00
Laboratory Plastics - Laboratory Stoppers
Laboratory Stoppers and Caps
THOMAPLAST®-High-Pure-Stopper made of Silicone platinum cross-linked
THOMAPLAST®-Silicone Sponge Stoppers
Application area
• A high-performance silicone sponge stopper with outstanding porosity, as a replacement for the conventional cotton stoppers. • The stopper can be sterilized 300 times at +180 °C for 10 hours due to its outstanding heat resistance and allows half the evaporation associated with regular cotton stoppers. • Silicone sponge stoppers are not hygroscopic, thus preventing a contamination by the growth of microorganisms on or in the stopper.
• Pharmaceutical technology, biotechnology, food industry, medical sector, beverage industry
Product specification
• Very good biological compatibility • Non-toxic, free from pyrogenes • Resistant to high temperature • Suitable for food contact applications • Absolutely odourless and tasteless
Product specification
Item 954791 954801
Technical specification
• Material: silicone (silicone rubber), platinum-catalyzed and free of peroxides • Colour: translucent • Shore hardness A: 45 ° • Temperature range: -60 to + 200 °C • Sterilization: autoclavable (+136 °C) • Tolerance: according to DIN 7715 T2 M3 • Regulations: conforming to FDA acc. to §177.2600 (USA), booklet No. 1227, 1980 „Décrets et circulaires du Ministère de l`Agriculture“ (France) and BS 6920-WRc Water Byelaws Scheme-(UK) • Migration: according to the standards established by the directive CEE 20/128, 93/128 and 93/9
Ø top mm
Ø bottom mm
Unit piece
Price EURO
23 30
21 23
1 1
16.00 20.00
THOMAPLAST®-High-Chem Stopper made of FPM Application area
• Laboratory technology, chemical technology, sealing technique, container technology, automobile industry, engineering operations and maintenance
Product specification
• Highest temperature resistance • Outstanding chemical resistance, particularly to aliphatic, aromatic and halogen-substituted hydrocarbons, fuels, oils, fats, hydraulic fluids, alkohols and acids • Very good heat resistance • Resistant to effects of ozone, aging, and weather • Flame-resistant • Highest mechanical strength
Technical specification
Item 340909 340910 340911 340912 340913 340914 340915 340916 340917 340918 340919 340920 340921 340922 340923 340924 340925 340926 340927 340928 340929 340930
Ø top mm
Ø bottom mm
Height mm
Unit piece
Price EURO
29 29 31 31 33 33 35 35 38 38 42 42 45 45 49 49 55 55 60 60 66 66
24 24 25 25 28 28 30 30 32 32 35 35 37 37 42 42 45 45 51 51 56 56
30 30 34 34 34 34 38 38 38 38 42 42 45 45 49 49 48 48 51 51 55 55
5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10
72.00 122.00 80.00 134.00 88.00 144.00 96.00 162.00 106.00 178.00 110.00 182.00 124.00 202.00 140.00 224.00 164.00 258.00 208.00 326.00 256.00 384.00
• Material: FPM (fluorinated rubber) • Colour: green • Shore hardness A: 75° • Temperature range: -55 to +200 °C, for a short time up to +315 °C • Sterilization: autoclavable (+136 °C) • Tolerance: according to DIN 7715 T2 M3
Item 340873 340874 340875 340876 340877 340878 340879 340880 340881
Ø top mm
Ø bottom mm
Height mm
Unit piece
Price EURO
7 7 10 10 12 12 14 14 15
3 3 6 6 9 9 10 10 12
19 19 17.5 17.5 19 19 19 19 19
5 15 5 15 5 15 5 15 5
26.00 66.00 52.00 128.00 66.00 160.00 70.00 174.00 88.00
THOMAPLAST® I - 2015 49
Laboratory Plastics - Laboratory Caps Item 340882 340883 340884 340885 340886 340887 340888 340889 340890 340891 340892 340893 340894 340895 340896 340897 340898 340899 340900 340901 340902 340903 340904 340905 340906 340907 340908
Laboratory Stoppers and Caps
Ø top mm
Ø bottom mm
Height mm
Unit piece
Price EURO
15 16 16 17 17 19 19 21 21 23 23 26 26 29 29 32 32 34 34 37 37 40 40 43 43 49 49
12 13 13 14 14 16 16 18 18 19 19 22 22 24 24 26 26 28 28 31 31 34 34 36 36 40 40
19 21 21 21 21 23 23 25 25 28 28 30 30 32 32 34 34 36 36 41 41 43 43 45 45 49 49
15 5 15 5 15 5 15 5 15 2 5 2 5 2 5 1 2 1 2 1 2 1 2 1 2 1 2
216.00 94.00 228.00 122.00 282.00 156.00 242.00 174.00 272.00 110.00 204.00 154.00 298.00 176.00 344.00 124.00 198.00 146.00 228.00 168.00 264.00 182.00 280.00 240.00 372.00 286.00 438.00
Laboratory Caps THOMAPLAST -Protective Cap made of Silicone ®
Product specification
• Translucent protective caps made of silicone. • The caps are optimally suitable for protection of pipe and tubing ends or for protecting protruding, cylindrical-shaped parts during transport and all procedures that require the protection of openings (protection against knocks, splashes and dye). • The size given corresponds to the external diameter of the vessel to be capped in mm.
Item
Inside Ø mm
Unit piece
Price EURO
12 14 16 18 20 22 25 30 35 42 45 50
5 5 5 5 5 5 5 5 3 2 2 2
23.00 30.00 30.00 31.00 40.00 45.00 46.00 59.00 48.00 60.00 70.00 92.00
40852 40854 40856 40858 40860 40861 40863 40866 40868 40872 40873 40875
THOMAPLAST®-Test Tube Cap made of Aluminium with handle Application area
• For sterile but not hermetic closing of test tubes, particularly of culture tubes; may replace the plug of cotton wool in the bacteriological laboratory.
Technical specification
• Material: Cap: aluminum, coloured anodized, anodically oxidized, absolutely rust-free Special clamping spring: chromium-nickel-steel
Technical specification
• Material: silicone (silicone rubber) • Crosslinking: peroxide • Colour: translucent • Temperature range: -50 to +200 °C, for a short time +250 °C • Density: 1.15 ±0.03 g/cm3 • Shore hardness A: 62° ±5° • Elongation at break: 270 % • Tensile strength: 7.5 Mpa • Regulations: FDA §177.2600 and BfR XV silicone
50 THOMAPLAST® I - 2015
Item 73549 73573 73597 73600 73603 73606
Inside Ø mm
Wall thickness mm
Colour
Unit
Price
piece
EURO
12 14 15 15 15 15
0.5 0.5 0.5 0.5 0.5 0.5
silver silver silver blue red yellow
20 20 20 20 20 20
40.00 42.00 44.00 44.00 44.00 44.00
Laboratory Plastics - Laboratory Caps Item 73609 73621 73624 73627 73630 73633 73645 73648 73651 73654 73657 73660 73663 73666
Laboratory Stoppers and Caps
Inside Ø mm
Wall thickness mm
Colour
Unit
Price
piece
EURO
15 17 17 17 17 17 19 19 19 19 19 19 19 19
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
green silver blue red yellow green silver blue red yellow green brown violet black
20 20 20 20 20 20 20 20 20 20 20 20 20 20
44.00 46.00 46.00 46.00 46.00 46.00 46.00 46.00 46.00 46.00 46.00 46.00 46.00 46.00
THOMAPLAST®-Test Tube Cap made of Aluminium with claw Application area
• For sterile but not hermetic closing of test tubes, particularly of culture tubes; may replace the plug of cotton wool in the bacteriological laboratory.
Technical specification
• Material: Cap: aluminum, coloured anodized, anodically oxidized, absolutely rust-free Retaining clips: chromium-nickel-steel
Laboratory Semifinished Products and Aids THOMAPLAST®-Glass Fibre Wool GW1A and GW2A Product specification
• The Microlith filter wool is available in two qualities. • Both types withstand temperatures of +450 °C and +500 °C resp. for longer time periods. Type GW2A is steam-sterilizable without problems. • Both types are resistant to acids, alkalis, organic solvents as well as aerosols. • Variations of air humidity have an imperceptible influence on the weight as glass fibre wool is not hygroscopic and does not stretch or swell. • Insensitive to microorganisms. Usable in medicine, pharmacy and bacteriology. Also suited for use in sterile filter applications when the rare fibre preparations are removed before. • High retention capacity.
Technical specification
• Hydrolysis class (DIN 12111): 3 (GW1A); 1 (GW2A) • Acid class (DIN 12116): 2 • Alkali class (DIN 52322): 2 • Average fibre diameter: 10 - 11 • Density: 2.52 g/cm3 (GW1A); 2.39 g/cm3 (GW2A) • Max. fibre preparation: 0.1 % (based on synthetic fats) • Transformation temperature: +510 °C (GW1A); +557 °C (GW2A) • Softening point: +720 °C (GW1A); +783 °C (GW2A)
Item Item 73026 73068 73074 73080 73122 73191 73197 73215
Inside Ø
Colour
Unit
mm
Wall thickness mm
piece
EURO
12 15 15 15 17 24 24 28
0.5 0.5 0.5 0.5 0.5 1 1 1
red silver red green red blue yellow blue
20 20 20 20 20 20 20 20
22.00 24.00 24.00 24.00 24.00 36.00 36.00 42.00
71314 71315 71316 71317 71318 71319
Price
Type
Unit g
Price EURO
GW 1 A GW 1 A GW 1 A GW 2 A GW 2 A GW 2 A
10 30 50 10 30 50
16.00 23.00 31.00 20.00 35.00 44.00
THOMAPLAST®-Boiling Stones made of PTFE Product specification
• Highly resistant product withstanding hot acids and alkalis, hydro carbons, ketones, esters and alcohols in every concentration. • Prevent splashes and production of bubbles during boiling. Packed in resealable bag. • Highly active and durable • Temperature resistance: -200 to +250 °C
THOMAPLAST® I - 2015 51
Laboratory Plastics
Item
Laboratory Semifinished Products and Aids
Particle size mm
Unit g
Price EURO
4
450
202.00
60261
Item 40276 40277 40278 40279
THOMAPLAST®-Balls made of PTFE
Size
Volume ml
Unit piece
Price EURO
3 3 5 5
65 65 102 102
3 5 3 5
48.00 57.00 54.00 65.00
Product specification
• For distillation columns • High resistance to fluids and vapours • Usable up to +288 °C
THOMAPLAST®-Double Blowing Bulb made of PVC/NR with Net
Product specification
• Double blowing bulb with two working bulbs, made of two different materials: polyvinylchloride (plasticized PVC) and black natural rubber (NR).
Item
Outside Ø mm
Unit piece
Price EURO
3 6 9 15
50 50 50 50
55.00 100.00 175.00 198.00
60287 60288 60289 60290
40280 40281 40282
THOMAPLAST -Powder made of PTFE ®
Product specification
• An odourless, dry powder made of PTFE • It sticks electrostatically and can be polished to a permanently dry lubricating film. • Suitable for metal, wood, plastics, leather, ceramic etc.
Item
Unit g
Price EURO
60386
100
100.00
THOMAPLAST®-Blowing Bulb made of PVC Product specification
• Blowing bulb made of red-brown polyvinylchlorid (plasticized PVC)
52 THOMAPLAST® I - 2015
Item
Size
Volume ml
Unit piece
Price EURO
5 5 5
102 102 102
1 3 5
24.00 55.00 80.00
THOMAPLAST®-Standard Marker
Laboratory Plastics
Protection und Packaging
Product specification
• For direct marking of glass, porcelain, plastics, stainless steel, nonferrous metals. • Marks dry, humid as well as cold surfaces. • After marking immediately wipe-resistant and waterproof, but can be rubbed off mechanically.
Item
Colour
Design
Unit piece
Price EURO
40149 40150 40153 40154 40155 40156 40158 40159 40160
black red black red blue green red blue green
extra fine extra fine fine fine fine fine wide wide wide
3 3 3 3 3 3 3 3 3
21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00
Protection
Product specification
• Abrasion-resistant bench liners for electronic workplaces made of soldering tin-resistant, volume conductive 2-layer composite synthetic rubber, complete with cable lug/banana plug adapter and push-button connection for earth wires. Porefree, dust- and dirt-repellent surfaces, non-deforming; in three different optically convenient and dazzlingpoor dyeings.
Technical specification
• Dimensions: 610 x 900 mm • Material thickness: 2 mm • Leakage resistance: 105 - 107 Ohm (DIN 51953) • Volume resistivity: 105 - 107 Ohm (NFPA 99 56A) • Surface resistance: 105 - 2 x 107 Ohm (NFPA 99 56A) • Decay time: from 5000 V to 500 V 0.009 sec.; from 5000 V to 50 V 0.034 sec. Item 45726 45727 45728
Colour
Unit piece
Price EURO
beige platinium grey verdigris
1 1 1
123.00 123.00 123.00
THOMAPLAST®-Dycem®-Antislip Sheeting
THOMAPLAST -Lab Mat made of PTFE ®
Product specification
Product specification
• Made of pure PTFE with diamond-shaped mesh pattern; thickness approx. 1.6 mm, holes approx. 6 mm. Usable for elastic lining of shelves, fume hoods, sinks, cooling apparatuses, and as mesh for parts being submerged in etching chemicals and solutions. • The material does not absorb chemicals and odors, does not embrittle, is weakly reactive and resistant to chemicals, and easily cut to every desired size.
• A new material made on PVC base with amazing features. THOMAPLAST®-antislip sheeting is adhesive without sticking. A non-slip, vibration damping pad for vibrating and rotating devices, as bench liners, as working support for handling with smallest precision mechanical parts.
Item Item 60278
Width mm
Length m
Unit piece
Price EURO
300
3
1
502.00
THOMAPLAST®-ANTISTA EGB/ESG Bench Liner
952311 952321 952331 952341 952351 952361 952371 952401 953211 953221 953241 953261 952271
Width mm
Length m
Colour
Unit piece
Price EURO
200 200 200 200 200 400 400 400 200 200 200 400 400
2 2 2 2 2 2 2 2 9 9 9 9 9
blue red yellow green white blue red white blue red green blue red
1 1 1 1 1 1 1 1 1 1 1 1 1
72.00 72.00 72.00 72.00 72.00 121.00 121.00 121.00 264.00 264.00 264.00 371.00 371.00
THOMAPLAST® I - 2015 53
Laboratory Plastics
Protection und Packaging
THOMAPLAST®-Flask Lead Weight Ring
THOMAPLAST®-Service Case for Engineers
Application area
Product specification
• Weighting of freestanding glassware such as Erlenmeyer flasks, boiling bottles etc. in water baths to increase stability and to prevent chipping.
Product specification
• Lead rings with extra strong, chemical-resistant and bright-red dyed polyvinyl coating in different sizes for flasks up to 4 litres capacity.
Item
Ø ring
Rec. flask size l
Weight
Unit
83266 83267 83268 83269
0.25 - 0.5 0.25 - 1 0.5 - 2 1-4
Price
mm
g
piece
EURO
48 56 61 74
227 454 681 908
1 1 1 1
39.00 39.00 44.00 49.00
Laboratory Equipment and Utensils
• Black grained leather case with all-round zip fastener, inside lined with black plastic plates. The set contains 22 important RCT®-tools for service work • Content service-case: Ying glass: 30 mm Ø; 5 x magnification Side cutters: 120 mm, for hard wire up to 0.8 mm, for soft wire up to 1.5 mm, chrome-plated Snipe nose pliers: 140 mm, angular, with long jaws, slim model, with compression spring, chrome-plated Water pump pliers: 130 mm, chrome-plated Screwdriver DIN 5265: 100 x 4 mm, blade made from chrome vanadium, chrome-plated, with black tip Cross-recess screwdriver Pozidriv: blade made from chrome vanadium, with black tip, size 0 (length 60 mm), size 2 (lenght 100 mm) Screwdriver for grub screws: with plastic handle, blade made from chrome vanadium, nickel-plated, 80 x 2.8 mm Assembly screwdriver: nickel-plated blade, 45 x 6 mm with special square pattern BERNSTEIN handle Watchmaker‘s screwdriver: nickel-plated, with 4 interchangeable blades 1.5, 2.0, 2.5 and 3.0 mm Steel tweezers: nickel-plated, with bent tips (150 mm), straight (145 mm) Contact file: 150 mm Special sheet-metal scissors: serrated, extremely slim, 110 mm, nickel-plated Wrench key: special steel, nickel-plated, WAF 2.0, WAF 2.5, WAF 3.0, WAF 3.5 Torx-wrench key: with bore hole, chrome vanadium, burnished, T 10, T 15, T 20 Gas-soldering-iron Portasol: 10 - 60 W, max. temperature up to 450° C
THOMAPLAST®-Cuvette Washer made of PP Product specification
• Rinses and dries glass or quartz cuvettes without danger of damage. Holding the cuvette with the open end downwards, it is pressed against a soft rubber pad thereby closing the vacuum system. When poured into the funnel the washing liquid sprays as sharp jet into the cuvette and runs into the suction bottle. Using acetone for the last washing run and blowing air for some seconds results in perfectly clean and dry cuvettes. Minimum cuvette I.D must be 9 mm or larger to form a seal over the spray nozzle. • Includes 500 ml polypropylene vacuum flask and vinyl stopper with tubing. • Accessories: Fitting NS stopper (standard ground joint stopper) made of PP item 60670.
Item 71851
1
External dimensions mm
Weight1
Unit
Price
kg
piece
EURO
245 x 130 x 60
1.1
1
360.00
with tools
THOMAPLAST®-Service Set Product specification
Item 96790
Ø funnel mm
Volume suction bottle mm
Unit
Price
piece
EURO
89
500
1
228.00
54 THOMAPLAST® I - 2015
• Practical service case for the electronics engineer. Case with zip fastener made from black imitation leather. The case contains 18 clearly arranged special tools. In addition to writing materials, the writing case side has room in its 3 compartments for a writing block, leaflets, technical documents etc. There is also a transparent window for visiting cards or calendars and a pocket for small parts. Weight with tools approx. 0.95 kg. Outside dimensions (when closed) 320 x 230 x 30 mm.
Laboratory Plastics
Item 71849
Laboratory Equipment and Utensils
Unit piece
Price EURO
1
390.00
THOMAPLAST®-Clamping Vice
Item 83263 83264
Design
Unit piece
Price EURO
with support stand without foot
1 1
318.00 131.00
THOMAPLAST®-Mini Sieve Set
Product specification
• RCT®-clamping vice with interchangeable screw-on work mounts. Instead of the clamping device it is possible to place a circuit board holder (clamping capacity 25 - 270 mm), a universal screw-on plate with three fixing slots for bolts etc., and an angular adapter in order to obtain a larger turning circle.
Technical specification
• Screw-on mounting vice: Jaws: plastic Clamping pressure: 150 kp Clamping capacity: 70 mm Clamping depth: 38 mm
Application area
• Particle size analysis. • Particle size fractionating of small and smallest amounts of substances.
Product specification
• Stackable precision sieves for arranging of sieve combinations. True to size interchangeable sieve segments with toollessly exchangeable stable strainers of different mesh widths according to U.S. ASTMstandards, tightly closing cover and bottom receiver.
Technical specification
• Material: Sieve segments, cover, receiver and screw fitting for strainers: polypropylene; Strainers: phosphor bronze • Content of supply standard set: 4 pieces of sieve segments with screw fittings for strainers, 8 pieces of different strainers in meshdimensions, one cover and one bottom receiver • Dimension: Sieve segments: internal diameter 51 mm, external diameter 65 mm Stainers: mesh widths 24; 35; 45; 60; 80; 120; 170, and 230 mesh • Stacking height: 152 mm (standard set with 4 sieves, cover and bottom receiver)
Item 71847
Unit piece
Price EURO
1
345.00
THOMAPLAST®-Flexi-Instrument Holder Application area
• Positioning of small laboratory devices such as electrodes, measuring magnifier and measuring telescopes, illumination of scales etc. • Support stand in chemical and physical laboratories.
Product specification
Item 83261
Unit set
Price EURO
1
177.00
• Ball joint arm made of disruptively strong acetal resin segments („swanneck“) of approx. 46 cm length, bendable in any position, to elongate or shorten by adding or removing of segments. With stainless steel bolt (diameter 12.7 mm, length 19 mm) at the movable end for fastening of device clamps etc. With suction stand or heavy support stand for setting up.
THOMAPLAST® I - 2015 55
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder Item
Separation Technology - Filtration Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder THOMAPOR®-Dialysing Tubing made of Regenerated Cellulose - Standard Application area
• Gentle desalination, purification and concentration of sensitive biological materials, such as sera, protein solutions, plant extracts • Desalination of metal colloids. • Purification of protein and nucleic acid fragments. • Exchange of electrolytes in bioactive media. • Growing of bacterial cultures. • Depyrogenization of sensitive bioeffective systems.
Product specification
• High-tech dialysing tubing made of regenerated cellulose for overall biological research, seamlessly manufactured, in rolls, made of clear highly pure and molecular-porous membrane material, absolutely free of traces of heavy metal and sulfur compounds, extremely low protein absorption especially in a weakly acetous environment, narrow cut-off ranges. Stabilized for storage with glycerol. For low and high-molecular systems with correspondingly defined cut-offs. • Because of its glycerol content required for storage stability, THOMAPOR®-dialysing tubing should be washed with water or diluted acetic acid before use. For storage of unused dialysing tubing air-tight containers are recommended which should be stored in the refrigerator. The tubing can be used in the pH range of 2 to 12 and at temperatures of +4 to +121 °C. The mentioned cut-offs are recommended values. In case of uncertainty the suitability of a given dialysing tubing has to be determined in preliminary tests, as the effective pore sizes of the cellulose membrane material depend on several external physicochemical factors, e.g. the buffer composition.
Filtration
Cut off
Flat Filling Filling width Ø volume kDalton mm mm ml/cm
50312 50313 50314 50315 50316 50317 50318 50319 50320 50321 50322 50323 50324 50325 50326 50327 50328 50329 45077 50331 45079 50332 50333 45081 50334 50335 50336 50337 50338 50339 50340 50341 50342 50343 50344 50345 50346
6-8 6-8 6-8 6-8 6-8 6-8 6-8 8 8 8 8 10 10 10 10 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 12 - 14 15 15 15 15 25 25 25 50 50 50
10 23 32 40 50 100 120 24 32 40 50 12 24 32 45 4 8 10 10 25 25 32 45 45 75 105 120 12 24 32 45 12 28 34 12 28 34
6.4 14.6 20.4 25.5 32 64 76 15 20.4 25.5 32 7.5 15 20.4 29 3 5 6.4 6.4 16 16 20.4 29 29 48 67 76 7.5 15 20.4 29 7.5 18 22 7.5 18 22
0.32 1.7 3.3 5.1 7.9 32 46 1.8 3.3 5.1 7.9 0.45 1.8 3.3 6.4 0.08 0.22 0.32 0.32 2 2 3.3 6.4 6.4 18 34 46 0.45 1.8 3.3 6.4 0.45 2.5 3.7 0.45 2.5 3.7
Design
Unit
Price
m
EURO
dry dry dry dry dry dry dry pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted dry dry dry dry dry dry dry dry dry dry dry dry pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted
15 660.00 30 660.00 30 660.00 30 690.00 30 720.00 15 660.00 15 780.00 10 660.00 10 660.00 10 660.00 10 660.00 10 660.00 10 660.00 10 660.00 10 660.00 2 228.00 2 228.00 15 660.00 30 708.00 15 440.00 30 708.00 15 560.00 15 440.00 30 708.00 15 440.00 15 1,440.00 15 1,440.00 10 675.00 10 675.00 10 675.00 10 675.00 10 675.00 10 675.00 10 675.00 10 675.00 10 675.00 10 675.00
THOMAPOR®-Dialysing Tubing made of Regenerated Cellulose − Praktik Item 50300 50301 50302 50303 50304 50305 50306 50307 50308 50309 50310
Cut off
Flat Filling Filling width Ø volume kDalton mm mm ml/cm 1 1 1 1 2 2 2 2 3.5 3.5 3.5
12 18 38 45 12 18 38 45 18 45 54
8 11.5 24 29 8 11.5 24 29 11.5 29 34
56 THOMAPLAST® I - 2015
0.3 1.1 4.2 6.4 0.3 1.1 4.6 6.4 1.1 6.4 9.3
Design
Unit
Price
m
EURO
pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted pre-wetted dry dry dry
10 10 10 10 10 10 10 10 15 15 15
660.00 660.00 660.00 660.00 660.00 660.00 660.00 660.00 660.00 660.00 660.00
Application area
• Gentle desalination, purification and concentration of sensitive biological materials, such as sera, plant extracts, cell hydrolysates • Dialysis of blood, protein solutions, and of other biocolloid systems. • Desalination of metal colloids. • Growing of bacterial cultures. • Demonstration material for teaching and training.
Product specification
• Material: Seamlessly manufactured dialysing tubing made of regenerated cellulose. • Features: Sterilization -wet or dry- up to +120 °C allowed. Do not dry up the dialysing tubing without having treated it first with a diluted glycerol solution. • Average pore diameter: 15-20 Å • MW cut-off: 10,000 to 20,000 dalton
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder • Biochemical analysis: Separation of low molecular and high molecular proteins and nucleic acid fragments. • Concentration: Solutions of biomolecules of a molecular weight exceeding 12,000 - 15,000 can be concentrated quickly and gently by suspending them in a 20 % solution of polyethylene glycol M 2000. • Salt exchange: Solutions of high-molecular salts cannot only be made free of the salt, but a new desired ionic environment can be established by exchange.
Filtration
THOMAPOR®-High-Pure Dialysing Tubing made of Regenerated Cellulose Application area
• Gentle desalination, purification and concentration of heavy metalsensitive biological and physiological material under sterile conditions. • Growing of bacterial cultures. • Depyrogenization and sterilization of sensitive, bioeffective systems.
Product specification
Item 84577 84578 84579 84580 84581 84582 84583 84584 84585 84586 84588 84589 50352 50353 50354 50355 50357 50358 503591 50359 50360 50361 50362 50363 50364 50365 50366 50370 50372 50373 50374
Flat width mm
Filling Ø mm
Filling volume ml/cm
Unit
10 23 25 32 40 50 69 80 104 117 144 159 69 80 104 117 144 159 10 23 25 32 40 69 80 104 117 23 32 40 50
6 15 16 20 25 32 44 51 66 75 92 101 44 51 66 75 92 101 6 15 16 20 25 44 51 66 75 15 20 25 32
0.31 1.77 2.01 3.14 4.91 8.04 15.2 20.42 34.19 44.16 66.44 80.08 15.2 20.42 34.19 44.16 66.44 80.08 0.28 1.77 2.01 3.14 4.91 15.2 20.42 34.19 49.08 1.77 3.14 4.91 8.04
3 3 3 3 3 3 3 3 3 2 2 2 15.2 15.2 15.2 15.2 15.2 15.2 30.5 30.5 30.5 30.5 30.5 152.5 152.5 152.5 152.5 305 305 305 305
m
Price EURO 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 81.00 81.00 81.00 154.00 154.00 187.00 226.00 262.00 280.00 263.00 270.00 286.00 306.00 306.00 958.00 1,164.00 1,304.00 1,499.00 1,702.00 1,874.00 1,442.00 2,633.00
• Highly purified, EDTA-washed dialysing tubing, free of traces of heavy metals and sulfur components, radiation-sterilized. For low- and high-molecular systems with narrowly defined cut-offs. Stabilized for storage with 0.05 % sodium azide. • The mentioned cut-offs are recommended values. In case of uncertainty the suitability of a given THOMAPOR®-dialysing tubing CS SHR high-pure quality has to be determined in preliminary tests, as the effective pore sizes of the membrane material depend on several external physico-chemical factors, e.g. the buffer composition. • Because of its sodium benzoate content required for storage stability, THOMAPOR®-Dialysing Tubing CS-SHR High-Pure should be washed with water before use. Subsequent conditioning in dialysing buffer is advisable.
Technical specification
• Material: regenerated cellulose • Length: 5 m
Item 45087 45088 45089 45091 45092 45093 45094 45095 45096 45097 45098 45099 45100 45101 45102 45103 45104 45105 45106 45107 45108 45109 45110 45111 45112 45113 45114 45115
Cut off
Filling Ø mm
Filling volume ml/cm
Length
kDalton
Flat width mm
Price
m
EURO
1 1 1 2 2 2 3.5 3.5 3.5 8 8 8 8 8 10 10 10 10 15 15 15 15 25 25 25 50 50 50
18 38 45 18 38 45 18 45 54 12 24 32 40 50 12 24 32 45 12 24 32 45 12 28 34 12 28 34
11.5 24 29 11.5 24 29 11.5 24 29 7.5 15 20.4 25.5 32 7.5 15 20.4 29 7.5 15 20.4 29 7.5 18 22 7.5 18 22
1.1 4.6 6.4 1.1 4.6 6.4 1.1 6.4 9.3 0.45 1.8 3.3 5.1 7.9 0.45 1.8 3.3 6.4 0.45 1.8 3.3 6.4 0.45 2.5 3.7 0.45 2.5 3.7
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00 530.00
THOMAPLAST® I - 2015 57
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder THOMAPOR®-Dialysing Tubing made of Cellulose Hydrate − Standard
Item
Application area
50438 50439 50440 50441 50442 50443 50444
• Gentle desalination, purification and concentration of sensitive biological materials, such as sera, plant extracts, cell hydrolysates • Dialysis of blood, protein solutions, and of other biocolloid systems. • Desalination of metal colloids. • Growing of bacterial cultures.
Product specification
• Seamlessly manufactured dialysing tubing made of purest cellulose hydrate membrane material. Mean pore size 25 Angstrom, nominal cut-off at MW 15,000 dalton. Laboratory-suitable supply length of 5 and 15 m/roll, graded flat widths between 24 mm and 180 mm.
Technical specification
• Diffusion permeability for salts: 2.8 x 10-4 cm x s-1; (pressureless continuous-flow cell; 0.1 % aqueous urea solution at +20 °C) • Mechanical permeability: 1.5 x 10-5 cm x s-1 bar-1; (stirring cell 0.1 bar; water at +20 °C) • Retention against dextran: 60 % (1 % dextran solution MW 10,000; 0.1 bar)
Filtration
Flat width mm
Filling Ø mm
Filling volume ml/cm
Unit
Price
m
EURO
89 102 115 126 141 156 180
69 79 89 96 108 120 138
26.41 33.17 41.83 51.5 62.18 73.86 79.64
15 15 15 15 15 15 15
119.00 146.00 200.00 249.00 273.00 292.00 308.00
THOMAPOR®-Dialysing Tubing made of Cellulose Hydrate − Rapid Application area
• Gentle desalination, purification and concentration of sensitive biological materials, such as sera, plant extracts, cell hydrolysates
Product specification
• Seamlessly manufactured dialysing tubing made of purest cellulose hydrate membrane material. Larger number density of pores and lower wall thickness increase dialysing speed by 20 % and more compared to standard qualities without loss of mechanical stability. Mean pore size 25 Angstrom, nominal cut-off at MW 15,000 dalton. Laboratorysuitable supply length of 3 and 15 m/roll, graded flat widths between 4 mm and 148 mm.
Technical specification
Item 84597 84598 84599 84600 84602 84603 84604 84605 84607 84613 84608 84609 84610 84611 84612 50427 50428 50429 50430 50432 50433 50434 50435 50437
Flat width mm
Filling Ø mm
Filling volume ml/cm
Unit m
EURO
24 32 34 40 49 53 58 66 80 89 102 115 126 141 156 24 32 34 40 49 53 58 66 80
16 21 22 28 34 40 45 50 60 69 79 89 122 138 153 16 21 22 28 34 40 45 50 60
2 3.46 4.15 4.9 7.54 9.07 10.75 12.56 19.62 26.41 33.17 41.83 51.5 62.18 73.86 2 3.46 4.15 4.9 7.54 9.07 10.75 12.56 19.62
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 15 15 15 15 15 15 15 15 15
43.00 43.00 43.00 47.00 54.00 57.00 57.00 57.00 57.00 57.00 60.00 94.00 99.00 111.00 118.00 94.00 94.00 94.00 110.00 128.00 107.00 107.00 107.00 113.00
58 THOMAPLAST® I - 2015
Price
• Diffusion permeability for salts: 4.2 x 10-4 cm x s-1; (pressureless continuous-flow cell; 0.1 % aqueous urea solution at +20 °C) • Mechanical permeability: 3.1 x 10-5 cm x s-1 bar-1; (stirring cell 0.1 bar; water at +20 °C) • Retention against dextran: 63 % (1 % dextran solution, MW 10,000; 0.1 bar)
Item 84567 84568 84570 84571 84573 84574 84576 50445 50446 50447 50449 50450 50452
Flat width mm
Filling Ø mm
Filling volume ml/cm
Unit
Price
m
EURO
4 10 25 33 80 99 148 10 25 33 80 99 148
2.6 6 12 19 51 63 94 6 12 19 51 63 94
0.05 0.31 1.13 2.83 20.42 31.16 69.36 0.28 1.13 2.83 20.42 31.16 69.36
3 3 3 3 3 3 3 15 15 15 15 15 15
62.00 62.00 55.00 55.00 65.00 83.00 99.00 234.00 208.00 208.00 241.00 292.00 386.00
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder THOMAPOR®-Dialysing Tubing made of Cellulose Ester
Item
Application area
• Gentle desalination, purification and concentration of sensitive biological materials, such as sera, protein solutions, plant extracts • Desalination of metal colloids. • Purification of protein and nucleic acid fragments. • Exchange of electrolytes in bioactive media. • Growing of bacterial cultures. • Depyrogenization of sensitive bioeffective systems.
45019 45068 45020 45021 45022 45023 45024 45025 45026 45027 45028 45074
Product specification
• High-tech dialysing tubing for overall biological research, seamlessly manufactured, in rolls, made of clear highly pure and molecular-porous membrane material, absolutely free of traces of heavy metal and sulfur compounds, extremely low protein absorption. For low and highmolecular systems with correspondingly defined cut-offs.
Cut off
Filtration Filling Ø mm
Volume
Length
kDalton
Flat width mm
Price
ml/cm
m
EURO
20 25 50 50 50 50 100 100 100 100 300 1000
31 12 10 16 24 31 10 16 24 31 16 16
20 7.7 6.4 10 15 20 6.4 10 15 20 10 10
3.1 0.38 0.32 0.79 1.8 3.1 0.32 0.79 1.8 3.1 0.79 0.79
10 10 10 10 10 10 10 10 10 10 10 10
790.00 675.00 575.00 658.00 754.00 790.00 575.00 658.00 754.00 790.00 658.00 658.00
Technical specification
• Material: cellulose ester, hydrophilic, symmetric porosity • pH range: 2 to 9 • Max. temperature: +37 °C (recommended) • Storage: wet, with 0.05 % sodium azide
THOMAPOR®-Dialysing Mini Tubing Chamber made of Cellulose Ester Product specification
• Dialysing tubing made of sulfur- and heavy metal-free cellulose ester (CE) with integrated end pieces; one side with a flared screw cap for filling without material loss, the other side with a weighted sealing piece for safe balance in the dialysing vessel. Graduated laboratoryoriented cut-offs (MWCO) between 100 and 300,000 dalton, for dialysis of volumes up to 10 ml; diameter 10 mm, sterile packaged for the immediate use in dialysing vessels preferably in THOMAPOR®dialysing cylinders, items 58718 and 58758.
Item
Cut off
kDalton
Flat width mm
45000 45001 45002 45003 45034 45004 45036 45005 45006 45007 45040 45046 45008 45009 45010 45011 45012 45013 45014 45015 45061 45016 45017 45018
0.1 - 0.5 0.1 - 0.5 0.1 - 0.5 0.1 - 0.5 0.5 0.5 - 1 0.5 0.5 - 1 0.5 - 1 0.5 - 1 1 3.5 3.5 - 5 3.5 - 5 3.5 - 5 3.5 - 5 8 - 10 8 - 10 8 - 10 8 - 10 10 20 20 20
10 16 24 31 8 10 12 16 24 31 12 8 10 16 24 31 10 16 24 31 16 10 16 24
Filling Ø mm
Volume
Length
Price
ml/cm
m
EURO
6.4 10 15 20 5.1 6.4 7.7 10 15 20 7.7 5.1 6.4 10 15 20 6.4 10 15 20 10 6.4 10 15
0.32 0.79 1.8 3.1 0.26 0.32 0.38 0.79 1.8 3.1 0.38 0.26 0.32 0.79 1.8 3.1 0.32 0.79 1.8 3.1 0.79 0.32 0.79 1.8
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
575.00 658.00 754.00 790.00 630.00 575.00 675.00 658.00 754.00 790.00 675.00 630.00 575.00 658.00 754.00 790.00 575.00 658.00 754.00 790.00 715.00 575.00 658.00 754.00
Item
Cut off
Volume
Length
Unit
ml
Outside Ø mm
kDalton
58719 58721 58723 58726 58727 58729 58730 58731 58732 58734 58736 58738 58740 58742 58743 58744
0.1 - 0.5 0.5 - 1 3.5 - 5 8 - 10 20 50 100 300 0.1 - 0.5 0.5 - 1 3.5 - 5 8 - 10 20 50 100 300
Price
mm
piece
EURO
1 1 1 1 1 1 1 1 5 5 5 5 5 5 5 5
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
320.00 320.00 320.00 320.00 320.00 320.00 320.00 320.00 350.00 350.00 350.00 350.00 350.00 350.00 350.00 350.00
THOMAPLAST® I - 2015 59
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder Item
Cut off
Volume
Length
Unit
Price
ml
Outside Ø mm
kDalton
mm
piece
EURO
58745 58747 58749 58752 58753 58755 58756 58757
0.1 - 0.5 0.5 - 1 3.5 - 5 8 - 10 20 50 100 300
10 10 10 10 10 10 10 10
10 10 10 10 10 10 10 10
160 160 160 160 160 160 160 160
12 12 12 12 12 12 12 12
370.00 370.00 370.00 370.00 370.00 370.00 370.00 370.00
THOMAPOR®-Dialysing Cylinder Product specification
• Cylindrical vessel for the rapid routine dialysis with dialysing tubing, made of glass-clear, bioinert plastic material, free of leachable components; with tight-closing cover and strong 40 mm magnetic stirring bar. Flat bottom for putting on magnetic stirrers; excellently suited for all THOMAPOR®-dialysing mini tubing chambers made of cellulose ester, items 58719 to 58757; two laboratory-oriented sizes.
Filtration
THOMAPOR®-Dialysing Tubing Closure Clamp made of PP
Item
for max. flat width mm
Unit piece
Price EURO
17 42 72 95 180
5 5 5 5 5
40.00 45.00 55.00 61.00 66.00
84564 84565 84590 84594 84595
THOMAPOR®-Dialysing Tubing Clip made of PP Product specification
• Polypropylene clip closes dialysing tubing reliably without damaging it.
Item 58718 58758
Volume ml
Height mm
Outside Ø mm
Unit piece
Price EURO
750 1,000
105 175
107 110
1 1
150.00 150.00
THOMAPOR®-Closure Clamp made of PP for Dialysing Tubing General product specification
• Clamp system for safe and gentle closure of dialysing tubing of all dimensions and types, made of physiologically safe and chemically inert polypropylene (white). To be opened at any time without problems and reusable many times. Chemically sterilizable, autoclavable at +121 °C. • Two-part closure system, consisting of a resilient clamp with integral pressure ribs and fitted in round shaped rod. Four standard sizes for dialysing tubing with flat widths up to 17, 42, 72, 95, and 180 mm. • The end of the dialysing tubing to be sealed is fixed with one hand over the opening of the clamp in such a way that it projects approx. 10 mm. Then the round shaped rod is pressed into the clamp.
60 THOMAPLAST® I - 2015
Item 94541 94542 94543
Length mm
Unit piece
Price EURO
12 35 75
10 10 10
112.00 92.00 118.00
THOMAPOR®-Dialysing Tubing Opener
Separation Technology - Dialysing Tubing, Dialysing Clamps, Dialysing Cylinder Product specification
• For single use. Angled plastic piece with self-adhesive spots. When the tubing opener is pressed together over the tubing end, the opening is drawn open. It can be left at the tubing during filling it with liquid. When the tubing gets wet, the adhesive force of the opener extinguishes.
Item
Number of adhesive spots
Unit piece
Price EURO
2
100
132.00
94540
THOMAPOR®-Dialysing Tubing Filler Funnel made of PP Product specification
• Dialysing tubing filler funnel with graded adapter for slipping of dialysing tubing of different diameters. • Dialysing tubing is individually cut to length, slipped over the adapter and tightly fixed with a rubber band. • The filler funnel is now hanged at the edge of the container. • The closure cap can be marked. The funnel is sterilizable with steam at +121 °C.
Filtration
Anion-Exchange Membranes and Cation-Exchange Membranes THOMAPOR®-Ion-Exchange Membrane for Electrodialysis - PVC-reinforced Product specification
• Ion-exchange membranes made of polystyrene reinforced with PVC • Low electrical resistance • Electrodialysis membranes have always to be kept wet and should be stored in a 3 % NaCl solution in a cool and dark place. • Chemical resistance: Resistant to acids, alkalis and inorganic salt solutions; otherwise all properties as polystyrene. Good resistance to reducing agents. Permanent operation with oxidants reduces stability.
Technical specification
• Thickness: CEM: 0.15 - 0.17 mm; AEM: 0.11 - 0.14 mm • Tearing strength: CEM: 3 - 4 kg/cm2; AEM: 4 - 7 kg/cm2 • Resistivity: CEM: 2.7 - 3.2 Ohm/cm2; AEM: 3.0 - 4.5 Ohm/cm2 • Transport number t+: CEM: 0.7 (K+Na+); AEM: 0.02 • Transport number t++: CEM: 0.28 (Ca++Mg++); AEM: 0.02 • Transport number t-: CEM: 0.02 (CI-); AEM: 0.94 - 0.96 • Transport number t--: CEM: 0.02 (SO42-); AEM: 0.94 - 0.96 • Exchange capacity: CEM: 1.5 meq/g; AEM: 1.8 meq/g • Chemical form: CEM: Na; AEM: CI • Max. temperature: +40 °C, for a short time +60 °C
Item
For tubing inside Ø mm
Unit piece
Price EURO
5 - 13 14 - 28
5 5
46.00 54.00
12301 12302
Item
Design
Dimensions mm
Unit piece
Price EURO
553281 55329
Anion Cation
500 x 500 500 x 500
1 1
317.00 317.00
THOMAPOR®-Anion-Exchange Membrane for Electrodialysis - dry storage Application area
THOMAPOR®-Holding Ring for Dialysing Membranes Product specification
• Hold membranes of varying sizes necessary for dialysis or concentration purposes. • Double rings made of plastic which are adjusted in such a way that they can hold membranes of any size.
• Desalination of sea water or brackish water • Preparation of sugar solution, whey and other aqueous and nonaqueous solutions containing ions. • Purification of soiled pickling bathes • Chlorine production • Electrolytic synthesis of periodic acid and other chemicals
Product specification
• The membranes are supplied dry and should be stored at a dark place (max. +15 °C). Only for activation they have to be loaded in a 10% salt solution at +55 °C for at least 3 hours • Chemical stability MA-3475: Good chemical stability in neutral solutions, in acid solutions (ph 0-7) and in alkaline solutions (ph 7-9) Fair chemical stability in alkaline solutions (ph 9-14) Poor chemical stability to mild oxidizing agents and to reducing agents • Chemical stability MA-3512 (at +60 °C): H2SO4 up to 5 %, HCI and NaOH up to 4 % Item 50458 50459
Outside Ø mm
Unit piece
Price EURO
100 125
2 2
36.00 36.00
THOMAPLAST® I - 2015 61
Separation Technology - Anion-Exchange Membranes and Cation-Exchange Membranes Technical specification
• Electrical resistance: MA-3475: 24 Ohm/cm2 (0.1 N NaCI); 8 Ohm/cm2 (1.0 N NaCI) MA-3512: 14 Ohm/cm2 (0.1 N NaCI); 4 Ohm/cm2 (1.0 N NaCI) • Permeability: 75.0 % (0.5 N NaCI/1.0 N NaCI) • Water permeability: <3.2 ml/h/dm2 (at 0.35 kg/cm2) • Pressure resistance: MA-3475: min. 14 kg/cm2 MA-3512: min. 12 kg/cm2 • Thickness: MA-3475: approx. 0.40 mm MA-3512: approx. 0.15 mm • Density: MA-3475: approx. 405 g/m3 MA-3512: approx. 187 g/m3 • Capacity: 0.70 meq/g • Max. temperature: +95 °C • Dimensional stability: wet: excellent; dry: good • Regulations: Approvals of the Food Additives Regulations § 121.2593
Filtration
Technical specification
• Electrical resistance: 15 Ohm/cm2 (0.1 N NaCI); 6 Ohm/cm2 (1.0 N NaCI) • Permeability: 96 % (0.5 N NaCI/1.0 N NaCI) • Water permeability: <3.2 ml/h/dm2 (at 0.35 kg/cm2) • Pressure resistance: min. 14 kg/cm2 • Thickness: approx. 0.40 mm • Density: approx. 405 g/m3 • Capacity: 1.22 meq/g • Max. temperature: +95 °C • Dimensional stability: wet: excellent; dry: good • Regulations: Approvals of the Food Additives Regulations; § 121.2593
Item 50382 50383 50384
Type
Dimensions cm
Unit piece
Price EURO
MC-3470 MC-3470 MC-3470
25 x 25 50 x 50 100 x 100
1 1 1
108.00 297.00 957.00
THOMAPOR®-Anion-Exchange Membrane for Electrodialysis Product specification
Item 50376 50377 50378 50379 50380 50381
Type
Dimensions cm
Unit piece
Price EURO
MA-3475 MA-3475 MA-3475 MA-3512 MA-3512 MA-3512
25 x 25 50 x 50 100 x 100 25 x 30 50 x 30 90 x 100
1 1 1 1 1 1
108.00 297.00 956.00 100.00 275.00 880.00
THOMAPOR®-Cation-Exchange Membrane for Electrodialysis - dry storage Product specification
• The membrane resistance per surface unit is determined as follows: a) The sample is steeped 4 hours in a 1:1 mixture of 1.0 N NaCl and 1.0 N HCl and afterwards shaked for 24 hours in a 125 ml bottle containing 1.0 N NaCl. b) Then the sample is exposed to a direct current for 8 minutes in a photoconductive cell containing 1.0 N NaCl. After the first 4 minutes polarity should be changed. c) With the 3400 series the sample is heated in 0.1 N NaCl for 20 minutes at +100 °C, but with the 3100 series at +80-90 °C. Afterwards the surface resistance per unit is determined. • The membranes are supplied dry and should be stored at a dark place (max. +15 °C). Only for activation they have to be loaded in a 10% salt solution at +55 °C for at least 3 hours • Chemical stability: Good chemical stability in neutral solutions, in acid solutions (ph 0-7) and in alkaline solutions (ph 7-11) Fair chemical stability in alkaline solutions (ph 11-14) an to mild oxidizing agents Poor chemical stability to reducing agents
62 THOMAPLAST® I - 2015
• Anion permeable membranes, PET reinforced • Strongly basic • Electrodialysis membranes have always to be kept wet and should be stored in a 3 % NaCl solution in a cool and dark place. • Chemical resistance: Very good to acetaldehyde (15 %), acetaldehyde (30 %), aniline (4 %), ethanol (15 %), ethanol (50 %), ethylenglycol (15 %), ethylenglycol (30 %), acetic acid (15 %), acetic acid (50 %), H2SO4 (10 %), H2SO4 (30 %), HCI (7 %), HCI (35 %), oxalic acid (10 %), pyridine (15 %), pyridine (50 %), tartaric acid (15 %), tartaric acid (50 %) Good to ethyl „Cellosolve“ (50 %), ethylacetic acid (15 %), cresol (2.6 %), methyl „Cellosolve“ (50 %), triethylamine1) (15 %), triethylamine1) (50 %) Less good to acetone (15 %), dioxan (30 %), hydrochinone (5.8 %), methylethyl ketone (15 %), phenol (6 %), propylene glycol (50 %) 1) The transport number decreases with increasing electrical resistance
Technical specification
• Colour: brown • Thickness: 0.13 mm • Resistivity: 3.3 Ohm*cm2 (The resistivity was measured after equilibrium with 0.5 M NaCl solution at +25 °C.) • Counterion: bromide (br) • Water content: 15 wt % (at +25 °C) • Ion exchange capacity: 1.14 meq g-1 • Selectivity (0.1/0.5 mol/kg KCI): 97.9 % (at +25 °C) • Specific conductivity: 4.0 mS cm-1 (in CI- form in 0.5 M NaCI at +25 °C) • pH stability range: 1 - 8 (at +25 °C) • Delivery form: dry
Separation Technology - Anion-Exchange Membranes and Cation-Exchange Membranes Item 302899 302900
Dimensions mm
Unit piece
Price EURO
250 x 250 500 x 500
1 1
225.00 665.00
THOMAPOR®-Anion-Exchange Membrane for Electrodialysis - very stable
Item
• Anion permeable membranes • For all-purpose use, high mechanical stability • Strongly basic • Electrodialysis membranes have always to be kept wet and should be stored in a 3 % NaCl solution in a cool and dark place. • Chemical resistance: Very good to acetone (30 %), acetic acid (50 %), ethanol (50 %), ethylenglycol (50 %), H2SO4 (10 %), H2SO4 (40 %), HCI (10 %), HNO3 (20 %), methanol (50 %), NaCl (3 %), NaCl (20 %), sodium thiosulfate (3 %), phenol (7 %), citric acid (50 %) Less good to dioxan (30 %), NaOH (5 %), NH3 (4 %) Very low to strong oxidants
Technical specification
• Thickness: 0.16 - 0.18 mm • Tearing strength: 4.5 - 5.5 kg/cm2 • Resistivity: 2.5 - 3.5 Ohm*cm2 (The resistivity was measured after equilibrium with 0.5 N NaCl solution at +25 °C.) • Transport number t: >0.98 (CI- SO4--) (Transport number at +25 °C (measured by electrophoresis of sea water; current density 2 A/dm2)) • Counterion: CI• Water content: 0.25 - 0.30 g water/g dry membrane (equilibr.: 0.5 N NaCl solution) • Ion exchange capacity: 1.4 - 1.7 meq/g dry membrane
302901 302902
Dimensions mm
Unit piece
Price EURO
250 x 250 500 x 500
1 1
105.00 330.00
THOMAPOR®-Cation-Exchange Membrane for Electrodialysis - very stable Product specification
• Cation permeable membranes • For all-purpose use, high mechanical stability • Strongly basic • Electrodialysis membranes have always to be kept wet and should be stored in a 3 % NaCl solution in a cool and dark place. • Chemical resistance: Very good to acetic acid (50 %), ethanol (50 %), ethylenglycol (50 %), H2SO4 (10 %), H2SO4 (40 %), HCI (10 %), HNO3 (20 %), methanol (50 %), NaCl (3 %), NaCl (20 %), NaOH (5 %), sodium thiosulfate (3 %), NH3 (4 %), citric acid (50 %) Less good to acetone (30 %), dioxan (30 %) Very low to phenol (7 %), strong oxidants
Technical specification
• Transport number t: >0.98 (Na+ K+ Ca++ Mg++), transport number at +25 °C (measured by electrophoresis of sea water; current density 2 A/dm²) • Counterion: Na+ • Water content: 0.25 - 0.30 g water/g dry membrane (equilibr.: 0.5 N NaCl solution) • Ion exchange capacity: 1.5 - 1.8 meq/g dry membrane
Product specification
Item
Filtration
• Thickness: 0.17 - 0.19 mm • Tearing strength: 5 - 6 kg/cm2 • Resistivity: 2.5 - 3.5 Ohm x cm2, the resistivity was measured after equilibrium with 0.5 N NaCl solution at +25 °C
302890 302891
Dimensions mm
Unit piece
Price EURO
250 x 250 500 x 500
1 1
105.00 330.00
Hollow Fibres THOMAPOR®-Hollow Fibres Application area
• Separation of organic salts (desalination) • Separation of impurities of low molecular masses (purification) • Exchange of salts of low molecular masses (buffer exchange) In principle, all these applications are effected in the same way: Salts and other low molecular weight components diffuse out of the sample from one side of fibre into the dialysing solution. Due to the isotropy of the fibre dissolved substances can diffuse in both directions through the fibre. Particularly suited for dialysis of dissolved substances in a molecular mass range of 500-2000.
General product specification
• THOMAPOR®-hollow fibres are particularly suited for the dialysis of dissolved substances in a molecular mass range of 500-2000. The high permeability of dissolved substances in this range does not involve a high water permeability. • Micro hollow fibre: For concentration, desalination, and purification of ultramicro and micro amounts of valuable compounds (0.1 - 200 µl). Microsamples up to 0.1 µl can be sucked off in the micro dialysing fibre bundle. Outstandingly suited for dialysis and filtration are hollow fibres of a smaller diameter with inlet and outlet for samples. The hollow fibres are made of cellulose prepared of cotton linters. • Macro hollow fibre: The use of hollow fibres in desalination, concentration and fractionation is based on the unique feature of hollow fibres which can be imagined as a molecular sieve with pores the sizes of which can be controlled. Molecules smaller than the pores of the fibre wall can diffuse through it while larger molecules are retained. The homogenous structure of the fibres allows diffusion of dissolved substances in both directions, either from the inside of the fibre to the outside or vice versa. Dialysis was used traditionally for separation of salts and other dissolved low molecular weight substances out of biological and biochemical solutions. Many conventional dialysis techniques such as the use of dialysing bags are slower and inconvenient. The application of hollow fibres allows for instance a 95 % separation of salt out of serum in only 20 minutes. The hollow fibre units consist of bundles of small (200 µm inner diameter) semipermeable cellulose membrane tubing, which have a high surface/volume ratio compared to a bag. A large number of hollow fibres per bundle enlarges the effective surface and increases dialysis velocity.
THOMAPLAST® I - 2015 63
Separation Technology - Hollow Fibres
Filtration
THOMAPOR®-Micro Single Hollow Fibre for In-Vivo Dialysis
Borosilicate Glass Filter Disks
Product specification
• Hollow fibres for in-vivo applications and microdialysis, made of regenerated cellulose, inside diameter 200 µm, outside diameter 216 µm, length approx. 154 mm; working volume approx. 5 µl, flow rate at 10 mm Hg about 3 ml/h.
THOMAPOR®-Filter made of Borosilicate glass Application area
• Filters made of borosilicate glass are suitable for various applications because of their excellent properties. Applications are pharmaceutical, biotechnology, medical, chemical and environmental. They are used from coarse liquid and gas distribution to bacteria filtering.
General product specification
Item 58925 58926
Cut off kDalton
Number fibres
Unit piece
Price EURO
13 18
1 1
20 20
349.00 349.00
THOMAPOR®-Hollow Fibre Bundle for Microdialysis Product specification
• Complete hollow fibre bundles for processing of quantities up to 200 µl, made of regenerated cellulose (RC), cut-off (MWCO) 13,000 and 18,000 dalton resp. Hollow fibre inside diameter 200 µm, hollow fibre outside diameter 216 µm; fitted with sealing end pieces.
Item 50468 58924
Cut off kDalton
Number fibres
Bundle volume µl
Unit
Price
piece
EURO
13 18
20 20
140 140
1 1
330.00 415.00
• THOMAPOR®-borosilicate universal filters are exclusively made of borosilicate glass, without using other substances, such as binding agents which corresponds to DIN ISO 3585. They consist of pure glass grit. • The filter effect of a porous pad comprises screen effect and adsorption. If a filter should only act as a screen, its pores have to be smaller than the solid particles to be filtrated. The fluid volume to be put through is relatively small. Large flow volumes are achieved by use of a filter pad of which the filter effect is primarily based on adsorption. In this case, the filter pores can to be several times larger than the solid particles to be separated; e.g. for sterile filtration of air porous filter pads with pore sizes of 15 to 40 µm are used while the size of the particles to be retained (micro-organisms) is only 1/10 to 1/50 of the filter pore size. A sure adsorption can only be achieved with a very large inner surface of the filter body. If a filter pad is fritted of glass grit should get a large inner surface, the single granule already has to have a maximum large surface. • In this respect the THOMAPOR®-borosilicate universal filter program is an innovation. For production of the granules special crushing processes are used guaranteeing a splintery granule with a particularly large surface. This surface is again enlarged by a special treatment. • THOMAPOR®-borosilicate universal filters are manufactures as round plates in sizes of 5 to 400 mm diameter and are available in two designs: Type: G: ground to nominal diameter, edge non-fused Type BG: ground to nominal diameter and surface biplane, edge non-fused • The filter porosity is divided into 6 categories and lies between 10 and 500 µm, rendering the filters usable for all work in the chemical and pharmaceutical industry, in the laboratory and in industrial-scale plants. • Nominal value of maximum pore size (µm): 250 - 500: distribution of fluids and gases, supports for solid materials in flow systems 160 - 250: distribution of gases, distribution of gases in fluids with low gas pressure, filtration of coarse precipitations 100 - 160: coarse filtration, filtration of coarse precipitations, gas distribution in fluids, fluid distribution, coarse gas filter, extraction apparatuses for coarse material, supports for loose filter layers against gelatinous precipitations 40 - 100: preparative fine filtration, preparative work with crystalline precipitations, mercury filtration 16 - 40: analytical filtration, analytical work with medium fine precipitations, preparative work with fine precipitations, filtrations in cellulose chemistry, fine gas filters, extraction apparatuses for fine-granular material 10 - 16: analytical fine filtration, analytical work with very fine precipitations (e.g. BaSO4, Cu20), preparative work with corresponding fine precipitations, check-valve and stop valve for mercury
64 THOMAPLAST® I - 2015
Separation Technology - Borosilicate Glass Filter Disks THOMAPOR®-Filter Disk made of Borosilicate glass Type: G
Filtration Item 52603 52604 52605 52606 52607 52608 52609 52610 52611 52612 52613 52614 52615 52616 52617 52618 52619 52620 52621 52622 52623 52624 52625 52626 52627 52628 52629 52630 52631 52632 52633 52634
Product specification
• Type: G: ground to nominal diameter, edge non-fused
Item 52559 52560 52561 52562 52563 52564 52566 52567 52568 52569 52570 52571 52573 52574 52575 52576 52577 52578 52580 52581 52582 52583 52584 52585 52587 52588 52589 52590 52591 52592 52593 52594 52595 52596 52597 52598 52599 52600 52601 52602
Outside Ø1 mm
Pore size µm
Unit piece
Price EURO
10 10 10 10 10 10 10 10 20 20 20 20 20 20 25 25 25 25 25 25 30 30 30 30 30 30 40 40 40 40 40 40 50 50 50 50 50 50 60 60
250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6 6 6 6
57.00 57.00 57.00 57.00 57.00 64.00 59.00 59.00 59.00 59.00 59.00 75.00 62.00 62.00 62.00 62.00 62.00 72.00 69.00 69.00 69.00 69.00 69.00 80.00 85.00 85.00 85.00 85.00 85.00 92.00 118.00 118.00 118.00 118.00 118.00 138.00 105.00 105.00 105.00 105.00
1
Outside Ø1 mm
Pore size µm
Unit piece
Price EURO
60 60 60 60 70 70 70 70 70 70 80 80 80 80 80 80 90 90 90 90 90 90 100 100 100 100 100 100 120 120 120 120
16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16
6 6 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1
105.00 132.00 93.00 93.00 93.00 93.00 93.00 120.00 102.00 102.00 102.00 102.00 102.00 132.00 108.00 108.00 108.00 108.00 108.00 147.00 82.00 82.00 82.00 82.00 82.00 108.00 100.00 100.00 100.00 100.00 100.00 120.00
ground to nominal diameter
THOMAPOR®-Filter Disk made of Borosilicate glass Type: BG, biplane ground
Product specification
• Type BG: ground to nominal diameter and surface biplane, edge non-fused
Item 52637 52638 52639
Outside Ø1 mm
Pore size µm
Unit piece
Price EURO
5 5 5
160 - 250 100 - 160 40 - 100
10 10 10
85.00 85.00 85.00
THOMAPLAST® I - 2015 65
Separation Technology - Borosilicate Glass Filter Disks Item 52640 52641 52642 52643 52644 52645 52646 52647 52648 52649 52650 52651 52652 52653 52654 52655 52656 52657 52658 52659 52660 52661 52662 52663 52664 52665 52666 52667 52668 52669 52670 52671 52672 52673 52674 52675 52676 52677 52678 52679 52680 52681 52682 52683 52684 52685 52686 52687 52688 52689 52690 52691 52692 52693 52694 52695
Outside Ø1 mm
Pore size µm
Unit piece
Price EURO
5 5 10 10 10 10 10 10 20 20 20 20 20 20 25 25 25 25 25 25 30 30 30 30 30 30 40 40 40 40 40 40 50 50 50 50 50 50 60 60 60 60 60 60 70 70 70 70 70 70 80 80 80 80 80 80
16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 6 6 6 6 6 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2
85.00 100.00 90.00 90.00 90.00 90.00 90.00 105.00 92.00 92.00 92.00 92.00 92.00 110.00 100.00 100.00 100.00 100.00 100.00 118.00 105.00 105.00 105.00 105.00 105.00 126.00 87.00 87.00 87.00 87.00 87.00 96.00 117.00 117.00 117.00 117.00 117.00 129.00 93.00 93.00 93.00 93.00 93.00 102.00 141.00 141.00 141.00 141.00 141.00 153.00 110.00 110.00 110.00 110.00 110.00 120.00
66 THOMAPLAST® I - 2015
Filtration Item 52696 52697 52698 52699 52700 52701 52702 52703 52704 52705 52706 52707 52708 52709 52710 52711 52712 52713 1
Outside Ø1 mm
Pore size µm
Unit piece
Price EURO
90 90 90 90 90 90 100 100 100 100 100 100 120 120 120 120 120 120
250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16 250 - 500 160 - 250 100 - 160 40 - 100 16 - 40 10 - 16
2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1
139.00 139.00 139.00 139.00 139.00 151.00 118.00 118.00 118.00 118.00 118.00 126.00 170.00 170.00 170.00 170.00 170.00 181.00
ground to nominal diameter and biplane
Sintered Plates, Sintered Rods and Sintered Pipes THOMAPOR®-Porous Sintered Material made of PE Application area
• Filtration of gases and fluids • Gassing and ventilation, atomization • Fluidizing (keeping bulk material suspended by homogenous flowing through of a carrier gas) • Use of the porous material structure and its chemical resistance (condensate separation, separation of emulsions, diaphragm in electrodialysis, carrier body for fluids as false bottom)
General product specification
• Porous sintered plastic made of pure low-pressure HDPE of high density. Through an exactly defined and controlled sintering process PE granules are fused together so that stable bodies of various shapes form. By granular material selection and choice of process parameters the pore size of the porous THOMAPOR®-sintered elements can be selectively influenced. • Temperature load: +82 °C as permanent load; +100 °C without loading; +116 °C with interruptions • Material of very high density and hydrophobic properties • Very well suited for machining. Material can be sawed, through-drilled and processed by machines. • Allows thermic welding with hot inert gas or with a PTFE-coated welder • Can be bonded by epoxy-based adhesives with itself, with wood, metal and ceramics. Epoxy forms a mechanical bond with the plastic and a chemical bond with the substrate resulting in a strong bonding. • Resistant to alkohols, aliphatic hydrocarbons, organic compounds such as technical oils, strong alkalis, acids and their salt-formers. A weak attack is possible by oxidants, chlorinated and aromatic hydrocarbons.
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes THOMAPOR®-Sintered Plate made of Porous UHMW-PE
Item
Technical specification
• Material: polyethylene of ultrahigh molecular weight UHMW-PE • Design: plates, hydrophobic
12147 12148 12149 12150 12151 12152 12153 12154 12155 12156 12157 12158 12159 12160 12161 12162 12163 12164 12165 12166 12167 12168 12169 12170 12171 12172 12173 12174 12175 12176 12177 12178 12179 12180 12181 12182
52381, 12135 Item 52381 52382 52383 52384 52385 52386 52387 52388 52389 52390 52391 52392 52393 52394 52395 52396 52397 52398
52381, 12135
Pore size µm
Thickness mm
Dimensions mm
Price EURO
10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20
1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.2 3.2 6.35 6.35 6.35 6.35 6.35 6.35
100 x 100 100 x 100 250 x 250 250 x 250 500 x 500 500 x 500 100 x 100 100 x 100 250 x 250 250 x 250 500 x 500 500 x 500 100 x 100 100 x 100 250 x 250 250 x 250 500 x 500 500 x 500
49.00 54.00 72.00 77.00 133.00 139.00 62.00 67.00 105.00 110.00 251.00 259.00 75.00 80.00 149.00 156.00 338.00 346.00
THOMAPOR®-Sintered Plate made of Microporous HDPE Technical specification
12135 12136 12137 12138 12139 12140 12141 12142 12143 12144 12145 12146
10 10 10 10 10 10 10 10 10 10 10 10
2 2 2 2 2 2 2 2 2 2 2 2
35 35 35 45 45 45 45 45 45 45 45 45
Thick- Dimensions ness mm cm 3 3 3 5 5 5 8 8 8 20 20 20
20 20 20 20 20 20 20 20 20 20 20 20 40 40 40 40 40 40 40 40 40 40 40 40 80 80 80 80 80 80 80 80 80 80 80 80
5 5 5 5 5 5 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20 20 20 20 20 20 20 20 20
35 35 35 45 45 45 45 45 45 45 45 45 35 35 35 45 45 45 45 45 45 45 45 45 35 35 35 45 45 45 45 45 45 45 45 45
Thick- Dimensions ness mm cm 3 3 3 5 5 5 8 8 8 20 20 20 3 3 3 5 5 5 8 8 8 20 20 20 3 3 3 5 5 5 8 8 8 20 20 20
Price EURO
25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 105.00 50 x 50 305.00 100 x 100 936.00 25 x 25 197.00 50 x 50 596.00 100 x 100 1,580.00 25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 105.00 50 x 50 305.00 100 x 100 936.00 25 x 25 197.00 50 x 50 596.00 100 x 100 1,580.00 25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 105.00 50 x 50 305.00 100 x 100 936.00 25 x 25 197.00 50 x 50 596.00 100 x 100 1,580.00
Pore Filter Porosity size fineness µm µm %
Pore Filter Porosity size fineness µm µm %
THOMAPOR®-Sintered Plate made of Porous HDPE
• Material: low pressure polyethylene (HDPE) of high density • Design: hydrophobic, does not swell in water Item
Filtration
Price EURO
25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 95.00 50 x 50 277.00 100 x 100 834.00 25 x 25 105.00 50 x 50 305.00 100 x 100 936.00 25 x 25 197.00 50 x 50 596.00 100 x 100 1,580.00
Technical specification
• Material: low pressure polyethylene (HDPE) of high density • Design: plates, hydrophobic
52228, 52905
52228, 52905
THOMAPLAST® I - 2015 67
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes Item 52228 52229 52230 52231 52232 52233 52234 52235 52236 52237 52238 52239 52240 52241 52242 52243 52244 52245 52246 52247 52248 52249 52250 52251 52252 52253 52254 52255 52256 52257 52258 52259 52260 52261 52262 52263
Pore size µm
Thickness mm
Dimensions mm
Price EURO
35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35
100 x 100 100 x 100 100 x 100 100 x 100 250 x 250 250 x 250 250 x 250 250 x 250 500 x 500 500 x 500 500 x 500 500 x 500 100 x 100 100 x 100 100 x 100 100 x 100 250 x 250 250 x 250 250 x 250 250 x 250 500 x 500 500 x 500 500 x 500 500 x 500 100 x 100 100 x 100 100 x 100 100 x 100 250 x 250 250 x 250 250 x 250 250 x 250 500 x 500 500 x 500 500 x 500 500 x 500
29.00 29.00 29.00 29.00 56.00 56.00 56.00 56.00 132.00 132.00 132.00 132.00 44.00 44.00 44.00 44.00 70.00 70.00 70.00 70.00 153.00 153.00 153.00 153.00 65.00 65.00 65.00 65.00 102.00 102.00 102.00 102.00 199.00 199.00 199.00 199.00
THOMAPOR®-Sintered Plate made of Porous LDPE Technical specification
• Material: low pressure polyethylene with highly porous structure • Density: 0.61 - 0.66 g/cm3
Item 52905 52906 52907 52908 529011 52902 52903 52904
Pore size µm 20 20 20 20 20 20 20 20
Porosity Thickness Dimensions % mm mm 40 40 40 40 40 40 40 40
68 THOMAPLAST® I - 2015
3 5 6 8 3 5 6 8
225 x 225 225 x 225 225 x 225 225 x 225 450 x 450 450 x 450 450 x 450 450 x 450
Price EURO 105.00 105.00 141.00 141.00 243.00 243.00 305.00 305.00
Filtration
THOMAPOR®-Sintered Disk made of Porous UHMW-PE Technical specification
• Material: polyethylene of ultrahigh molecular weight (UHMW-PE) • Design: disks, hydrophobic
Item 52417 52418 52419 52420 52421 52422 52425 52426 52427 52428 52429 52430 52433 52434 52435 52436 52437 52438 52441 52442 52443 52444 52445 52446 52449 52450 52451 52452 52453 52454 52457 52458 52459 52460 52461 52462
Pore size µm
Outside Ø mm
Thickness mm
Unit piece
Price EURO
10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20
13 13 13 13 13 13 25 25 25 25 25 25 47 47 47 47 47 47 50 50 50 50 50 50 76 76 76 76 76 76 90 90 90 90 90 90
1.6 1.6 3.2 3.2 6.35 6.35 1.6 1.6 3.2 3.2 6.35 6.35 1.6 1.6 3.2 3.2 6.35 6.35 1.6 1.6 3.2 3.2 6.35 6.35 1.6 1.6 3.2 3.2 6.35 6.35 1.6 1.6 3.2 3.2 6.35 6.35
25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5
60.00 65.00 100.00 100.00 125.00 150.00 125.00 130.00 140.00 150.00 175.00 175.00 on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req.
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes THOMAPOR®-Sintered Disk made of Porous HDPE Technical specification
Item 52308 52309 52310 52311 52312 52313 52314 52316 52317 52318 52319 52320 52322 52323 52326 52327 52328 52330 52338
• Material: low pressure polyethylene (HDPE) of high density • Design: disks, hydrophobic
Item 52266 52267 52268 52269 52270 52271 52272 52273 52274 52275 52276 52277 52278 52279 52280 52281 52282 52283 52284 52285 52286 52287 52288 52289 52291 52292 52293 52294 52295 52296 52297 52298 52299 52300 52301 52302 52303 52304 52305 52306 52307
Pore size µm
Outside Ø mm
Thickness mm
Unit piece
Price EURO
35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35 70 120 250 35
13 13 13 13 13 13 13 13 13 13 13 13 25 25 25 25 25 25 25 25 25 25 25 25 47 47 47 47 47 47 47 47 47 47 47 47 50 50 50 50 50
1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 6.35 6.35 6.35 6.35 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 6.35 6.35 6.35 6.35 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 6.35 6.35 6.35 6.35 1.6 1.6 1.6 1.6 3.2
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
78.00 78.00 78.00 78.00 124.00 124.00 124.00 124.00 156.00 156.00 156.00 156.00 126.00 126.00 126.00 126.00 144.00 144.00 144.00 144.00 180.00 180.00 180.00 180.00 183.00 183.00 183.00 183.00 219.00 219.00 219.00 219.00 276.00 276.00 276.00 276.00 on req. on req. on req. on req. on req.
Filtration
Pore size µm
Outside Ø mm
Thickness mm
Unit piece
Price EURO
70 120 250 35 70 120 250 35 70 120 250 35 120 250 120 250 35 120 120
50 50 50 50 50 50 50 76 76 76 76 76 76 76 76 76 90 90 90
3.2 3.2 3.2 6.35 6.35 6.35 6.35 1.6 1.6 1.6 1.6 3.2 3.2 3.2 6.35 6.35 1.6 1.6 6.35
10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5
on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req. on req.
THOMAPOR®-Sintered Pipe made of Porous UHMW-PE Technical specification
• Material: polyethylene of ultrahigh molecular weight UHMW-PE • Design: seamless and hydrophobic
Item 52353 52354 52355 52356 52357 52358 52359 52360 52361 52362 52363 52364 52365 52366 52367 52368 52369 52370
Pore size µm
Inside Ø mm
Outside Ø mm
Length mm
Price EURO
10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20
12.7 12.7 12.7 12.7 19 19 25.4 25.4 28.6 28.6 39.6 39.6 42.8 42.8 57.2 57.2 60.8 60.8
19 19 25.4 25.4 25.4 25.4 38 38 35 35 52.4 52.4 52.4 52.4 70 70 76 76
460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460
96.00 100.00 110.00 116.00 110.00 116.00 121.00 126.00 121.00 126.00 162.00 167.00 162.00 167.00 192.00 197.00 202.00 208.00
THOMAPLAST® I - 2015 69
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes Item 52371 52372 52373 52374 52375 52376 52377 52378
Pore size µm
Inside Ø mm
Outside Ø mm
Length mm
Price EURO
10 20 10 20 10 20 10 20
63.6 63.6 66.4 66.4 139.6 139.6 152.2 152.2
70 70 76 76 152.4 152.4 165 165
460 460 460 460 460 460 460 460
210.00 215.00 210.00 215.00 548.00 558.00 609.00 624.00
THOMAPOR®-Sintered Pipe made of Microporous HDPE Technical specification
• Material: low pressure polyethylene (HDPE) of high density • Design: hydrophobic, does not swell in water
Item 12183 12184 12185 12186 12187 12188 12189 12190 12191 12192 12193 12194 12195 12196 12197 12198 12199 12200 12201 12202 12203 12204 12205 12206 12207 12208 12209 12210
Pore size µm 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20
Filter Porosity I-Ø fineness µm % mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 5 5 5 5
70 THOMAPLAST® I - 2015
35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 40 40 40 40
20 20 20 28 28 28 30 30 30 40 40 40 40 40 40 50 50 50 40 40 40 60 60 60 20 20 20 28
O-Ø
Unit
Price
mm
m
EURO
40 40 40 40 40 40 50 50 50 50 50 50 60 60 60 60 60 60 70 70 70 70 70 70 40 40 40 40
0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25
75.00 141.00 264.00 75.00 141.00 264.00 85.00 159.00 297.00 85.00 159.00 297.00 93.00 174.00 330.00 93.00 174.00 330.00 100.00 195.00 369.00 100.00 195.00 369.00 75.00 141.00 264.00 75.00
Item 12211 12213 12214 12215 12216 12217 12218 12219 12220 12221 12222 12223 12224 12225 12226 12227 12228 12229 12230 12231 12232 12233 12234 12235 12236 12237 12238 12239 12240 12241 12242 12243 12244 12245 12246 12247 12248 12249 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 12260 12261 12262 12263 12264 12265 12266
Pore size µm 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 80 80 80 80 80 80 80 80 80 80 80
Filtration Filter Porosity I-Ø fineness µm % mm 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20 20 20 20 20 20 20 20
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
28 28 30 30 30 40 40 40 40 40 40 50 50 50 40 40 40 60 60 60 20 20 20 28 28 28 30 30 30 40 40 40 40 40 40 50 50 50 40 40 40 60 60 60 20 20 20 28 28 28 30 30 30 40 40
O-Ø
Unit
Price
mm
m
EURO
40 40 50 50 50 50 50 50 60 60 60 60 60 60 70 70 70 70 70 70 40 40 40 40 40 40 50 50 50 50 50 50 60 60 60 60 60 60 70 70 70 70 70 70 40 40 40 40 40 40 50 50 50 50 50
0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5
141.00 264.00 85.00 159.00 297.00 85.00 159.00 297.00 93.00 174.00 330.00 93.00 174.00 330.00 100.00 195.00 369.00 100.00 195.00 369.00 75.00 141.00 264.00 75.00 141.00 264.00 85.00 159.00 297.00 85.00 159.00 297.00 93.00 174.00 330.00 93.00 174.00 330.00 100.00 195.00 369.00 100.00 195.00 369.00 75.00 141.00 264.00 75.00 141.00 264.00 85.00 159.00 297.00 85.00 159.00
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes Item 12267 12268 12269 12270 12271 12272 12273 12274 12275 12276 12277 12278 12279
Pore size µm
Filter Porosity I-Ø fineness µm % mm
80 80 80 80 80 80 80 80 80 80 80 80 80
20 20 20 20 20 20 20 20 20 20 20 20 20
45 45 45 45 45 45 45 45 45 45 45 45 45
40 40 40 40 50 50 50 40 40 40 60 60 60
O-Ø
Unit
Price
mm
m
EURO
50 60 60 60 60 60 60 70 70 70 70 70 70
1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1 0.25 0.5 1
297.00 93.00 174.00 330.00 93.00 174.00 330.00 100.00 195.00 369.00 100.00 195.00 369.00
Item 52223 52224 52225 52226 52227
Filtration
Pore size µm
Inside Ø mm
Outside Ø mm
Length mm
Price EURO
250 35 60 100 250
57.2 66.4 66.4 66.4 66.4
70 76 76 76 76
500 500 500 500 500
140.00 148.00 148.00 148.00 148.00
THOMAPOR®-Sintered Solid Rod made of Porous UHMW-PE Technical specification
• Material: polyethylene of ultrahigh molecular weight UHMW-PE • Design: solid rods, hydrophobic
THOMAPOR®-Sintered Pipe made of Porous HDPE Technical specification
• Material: low pressure polyethylene (HDPE) of high density • Design: seamless and hydrophobic
Item
Item 52200 52201 52202 52203 52204 52205 52206 52207 52208 52209 52210 52211 52212 52213 52214 52215 52216 52217 52218 52219 52220 52221 52222
Pore size µm
Inside Ø mm
Outside Ø mm
Length mm
Price EURO
35 60 100 250 35 60 100 250 35 60 100 250 35 60 100 250 35 60 100 250 35 60 100
12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 25.4 25.4 25.4 25.4 28.6 28.6 28.6 28.6 39.6 39.6 39.6 39.6 57.2 57.2 57.2
19 19 19 19 25.4 25.4 25.4 25.4 38 38 38 38 35 35 35 35 52.4 52.4 52.4 52.4 70 70 70
500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
78.00 78.00 78.00 78.00 94.00 94.00 94.00 94.00 109.00 109.00 109.00 109.00 102.00 102.00 102.00 102.00 121.00 121.00 121.00 121.00 140.00 140.00 140.00
52466 52467 52468 52469 52470 52471
Pore size µm
Outside Ø mm
Length mm
Price EURO
10 20 10 20 10 20
3.2 3.2 6.4 6.4 12.7 12.7
300 300 300 300 300 300
80.00 85.00 87.00 93.00 100.00 105.00
THOMAPOR®-Sintered Solid Rod made of Porous HDPE Technical specification
• Material: low pressure polyethylene (HDPE) of high density • Design: solid rods, hydrophobic
Item 52341 52342 52343 52344 52345 52346 52347 52348 52349
Pore size µm
Outside Ø mm
Length mm
Price EURO
35 70 120 35 70 120 35 70 120
3.2 3.2 3.2 6.4 6.4 6.4 12.7 12.7 12.7
300 300 300 300 300 300 300 300 300
54.00 54.00 54.00 61.00 61.00 61.00 73.00 73.00 73.00
THOMAPLAST® I - 2015 71
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes THOMAPOR®-Porous Sintered Material made of PTFE Application area
Item 301927 301933 302863 301915 301921 302864 14873 14874 96246 301934 302865 302866 14875 14876 14877 14878 301916 301922 301928 301935 14879 14880 14881 14882 14883 14884 301917 301923 301929 301936 96247 301937 96243 301924 96244 301925 301930 301938 301918 301926 301931 301939
• Filtration of gases and fluids • As gas feeding and distribution system (gassing) • THOMAPOR®-PTFE sintered elements are used for filtration of highly aggressive vapors, gases and fluids at highest temperatures up to +240 °C. The elements are easy to clean after the filtration process even when used with sticky media. • THOMAPOR®-PTFE sintered elements do not soil when dipped into water containing suspended matter as neither water nor electrolytes are able to enter into the pores. Nevertheless, the gas flow rate is high and of constant intensity.
General product specification
• Porous sintered plastic made of pure high-density polytetrafluoroethylene (PTFE). Through a exactly defined and controlled sintering process PTFE granules are fused together so that stable bodies of various shapes form. By granular material selection and choice of process parameters the pore size of the porous THOMAPOR®-sintered elements can be selectively influenced. • Usable in temperature ranges from -200 to +260 °C • Universal chemical resistance • Non-adhesive behavior • Physiological safety • Prevents water absorption • Hydrophobic, non-wettable • Use as porous false bottom • As dusting unit • As pressure-compensating element in apparatus building • As separator in the electrochemistry • Use of the porous material structure and its chemical resistance (condensate separation), separation of emulsions, diaphragm in electrodialysis, carrier for fluids.
THOMAPOR®-Sintered Plate made of Porous PTFE
Item 96242 301919 14867 14868 96245 301932 14869 14870 14871 14872 301914 301920 302861
Pore size µm
Thickness1 mm
Dimensions mm
Price EURO
1 1 1 1 1 1 1 1 1 1 5 5 5
0.5 0.5 1.6 1.6 2 2 3.2 3.2 6.35 6.35 0.5 0.5 1
100 x 100 300 x 300 100 x 100 250 x 250 100 x 100 300 x 300 100 x 100 250 x 250 100 x 100 250 x 250 100 x 100 300 x 300 320 x 320
118.00 258.00 81.00 230.00 138.00 302.00 119.00 345.00 214.00 557.00 118.00 258.00 218.00
72 THOMAPLAST® I - 2015
1
Filtration
Pore size µm
Thickness1 mm
Dimensions mm
Price EURO
5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20 25 25 25 25 25 25 30 30 30 30 40 40 50 50 60 60 60 60 100 100 100 100
2 2 3 0.5 0.5 1 1.6 1.6 2 2 2 3 3.2 3.2 6.35 6.35 0.5 0.5 2 2 1.6 1.6 3.2 3.2 6.35 6.35 0.5 0.5 2 2 2 2 0.5 0.5 0.5 0.5 2 2 0.5 0.5 2 2
100 x 100 300 x 300 320 x 320 100 x 100 300 x 300 320 x 320 100 x 100 250 x 250 100 x 100 300 x 300 320 x 320 320 x 320 100 x 100 250 x 250 100 x 100 250 x 250 100 x 100 300 x 300 100 x 100 300 x 300 100 x 100 250 x 250 100 x 100 250 x 250 100 x 100 250 x 250 100 x 100 300 x 300 100 x 100 300 x 300 100 x 100 300 x 300 100 x 100 300 x 300 100 x 100 300 x 300 100 x 100 300 x 300 100 x 100 300 x 300 100 x 100 300 x 300
138.00 302.00 304.00 118.00 258.00 218.00 74.00 209.00 138.00 302.00 258.00 304.00 108.00 313.00 195.00 507.00 118.00 258.00 138.00 302.00 74.00 209.00 108.00 313.00 195.00 507.00 118.00 258.00 138.00 302.00 138.00 302.00 118.00 258.00 118.00 258.00 138.00 302.00 118.00 258.00 138.00 302.00
Tolerance ±0.05 mm
THOMAPOR®-Sintered Disk made of Porous PTFE
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes Technical specification
Item
• Material: PTFE (polytetrafluoroethylene), microporous • Temperature range: -200 to +250 °C • Sterilization: autoclavable (+121 °C) Item 302832 302833 302834 302835 14851 302836 302837 14852 14859 14860 302838 302839 302840 302841 14853 302842 302843 14854 14861 14862 302844 302845 302846 302847 14855 302848 302849 14856 14863 14864 14857 14858 14865 14866 302850 302851 302852 302853 302854 302855
Outside Ø mm
Pore size µm
Thickness mm
Unit piece
Price EURO
13 13 13 13 13 13 13 13 13 13 25 25 25 25 25 25 25 25 25 25 47 47 47 47 47 47 47 47 47 47 50 50 50 50 90 90 90 90 90 90
5 5 5 10 10 10 10 10 25 25 5 5 5 10 10 10 10 10 25 25 5 5 5 10 10 10 10 10 25 25 10 10 25 25 5 5 5 10 10 10
1 2 3 1 1.6 2 3 3.2 1.6 3.2 1 2 3 1 1.6 2 3 3.2 1.6 3.2 1 2 3 1 1.6 2 3 3.2 1.6 3.2 1.6 3.2 1.6 3.2 1 2 3 1 2 3
5 5 5 5 2 5 5 2 2 2 5 5 5 5 2 5 5 1 2 1 5 5 5 5 2 5 5 1 2 1 1 1 1 1 3 3 3 3 3 3
55.00 75.00 98.00 55.00 68.00 75.00 98.00 116.00 68.00 116.00 112.00 156.00 198.00 112.00 198.00 156.00 198.00 186.00 198.00 186.00 222.00 320.00 444.00 222.00 200.00 320.00 444.00 172.00 200.00 172.00 111.00 200.00 111.00 200.00 286.00 376.00 474.00 286.00 376.00 474.00
14885 14886 14887 14888 14889 14890 14891 14892 14893 14894 14895 14896 14897 14898 14899 14900 14901 14902
Filtration
Pore size µm
Inside Ø mm
Outside Ø mm
Length mm
Price EURO
1 1 1 1 1 1 10 10 10 10 10 10 25 25 25 25 25 25
12.6 12.6 25.2 39.6 57.2 66.4 12.6 12.6 25.2 39.6 57.2 66.4 12.6 12.6 25.2 39.6 57.2 66.4
19 25.4 38 52.4 70 76 19 25.4 38 52.4 70 76 19 25.4 38 52.4 70 76
460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460
222.00 288.00 308.00 329.00 351.00 395.00 203.00 261.00 281.00 299.00 320.00 359.00 203.00 261.00 281.00 299.00 320.00 359.00
THOMAPOR®-Sintered Rod made of Microporous PTFE
Item 302875 302876 302877 302878 302879 302880 302881 302882 302883 302884 302885 302886
THOMAPOR®-Sintered Pipe made of Porous PTFE
Pore size µm
Outside Ø mm
Length mm
Unit piece
Price EURO
5 5 5 5 10 10 10 10 50 50 50 50
28 32 40 50 28 32 40 50 28 32 40 50
100 120 120 140 100 120 120 140 100 120 120 140
1 1 1 1 1 1 1 1 1 1 1 1
56.00 92.00 118.00 172.00 56.00 92.00 118.00 172.00 56.00 92.00 118.00 172.00
THOMAPOR®-Sintered Rod (rectangular) made of Porous PTFE
Item 14903 14904 14905 14906
Width mm
Height mm
Pore size µm
Length mm
Price EURO
3.2 6.4 12.7 3.2
3.2 6.4 12.7 3.2
1 1 1 10
300 300 300 300
90.00 143.00 216.00 82.00
THOMAPLAST® I - 2015 73
Separation Technology - Sintered Plates, Sintered Rods and Sintered Pipes Item 14907 14908 14909 14910 14911
Width mm
Height mm
Pore size µm
Length mm
Price EURO
6.4 12.7 3.2 6.4 12.7
6.4 12.7 3.2 6.4 12.7
10 10 25 25 25
300 300 300 300 300
129.00 197.00 82.00 129.00 197.00
THOMAPOR®-Sinter Plate on Cr-Ni-Steel Base (highly porous) Application area
• Gas filtration, fluid filtration, clarification and separation filtration, high pressure filtration, solvent separation, filtration of polyamides, polyesters and acetates before extrusion moulding of fibres and films
Product specification
• Cleaning of dirty sinter plates: In simple cases the THOMAPOR®sinter metal plates SR are cleaned in the countercurrent with a clean fluid or with clean gas according to the intended use of the filter. This method is always sufficient when all contaminations are retained at the surface of the filter element and no particles are lodged in the pore space. • Additionally, slight brushing with a soft nylon brush helps. If soiling particles are lodged in the filter and cleaning in the countercurrent is not sufficient, solvents can be used. Duration of cleaning and temperature can be varied depending on the degree of soiling. Use of acids or alkalis of high concentration and at high temperatures is not recommended. Neutralization with hot water should be done in any case. • THOMAPOR®-highly porous sinter metal plates SR comply with the directions of the German Food Law. Due to their very low carbon content they are highly resistant to intercristalline corrosion.
Technical specification
• Material: chromium-nickel-steel, based on material 1.4404 • Operating temperature: in oxidizing atmosphere: +500 °C in reducing atmosphere: +650 °C
Item
Pore Porosity Density size µm % g/cm³
52943 52944 52945 52946 52947 52948 52949 52950 52951
2.8 2.8 2.8 2.8 4 4 4 4 6
30 - 35 30 - 35 30 - 35 30 - 35 32 - 37 32 - 37 32 - 37 32 - 37 33 - 38
5.2 - 5.6 5.2 - 5.6 5.2 - 5.6 5.2 - 5.6 5.0 - 5.4 5.0 - 5.4 5.0 - 5.4 5.0 - 5.4 4.9 - 5.3
74 THOMAPLAST® I - 2015
Thick- Dimensions ness mm mm 3 5 8 10 3 5 8 10 3
125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125
Price EURO 167.00 210.00 261.00 356.00 167.00 210.00 261.00 356.00 167.00
Item
Filtration
Pore Porosity Density size µm % g/cm³
52952 52953 52954 52955 52956 52957 52958 52959 52960 52961 52962 52963 52964 52965 52966 52967 52968 52969 52970 52971 52972 52973 52974 52910 52911 52913 52914 52915 52916 52917 52918 52919 52920 52921 52922 52923 52924 52925 52926 52927 52928 52929 52930 52931 52932 52933 52934 52935 52936 52937 52938 52939 52940 52941 52942
6 6 6 8 8 8 8 13 13 13 13 20 20 20 20 25 25 25 25 32 32 32 32 2.8 2.8 2.8 2.8 4 4 4 4 6 6 6 6 8 8 8 8 13 13 13 13 20 20 20 20 25 25 25 25 32 32 32 32
33 - 38 33 - 38 33 - 38 36 - 41 36 - 41 36 - 41 36 - 41 37 - 42 37 - 42 37 - 42 37 - 42 38 - 43 38 - 43 38 - 43 38 - 43 39 - 44 39 - 44 39 - 44 39 - 44 40 - 45 40 - 45 4,3 - 4,7 4,3 - 4,7 30 - 35 30 - 35 30 - 35 30 - 35 32 - 37 32 - 37 32 - 37 32 - 37 33 - 38 33 - 38 33 - 38 33 - 38 36 - 41 36 - 41 36 - 41 36 - 41 37 - 42 37 - 42 37 - 42 37 - 42 38 - 43 38 - 43 38 - 43 38 - 43 39 - 44 39 - 44 39 - 44 39 - 44 40 - 45 40 - 45 40 - 45 40 - 45
4.9 - 5.3 4.9 - 5.3 4.9 - 5.3 4.7 - 5.1 4.7 - 5.1 4.7 - 5.1 4.7 - 5.1 4.6 - 5.0 4.6 - 5.0 4.6 - 5.0 4.6 - 5.0 4.5 - 4.9 4.5 - 4.9 4.5 - 4.9 4.5 - 4.9 4.4 - 4.8 4.4 - 4.8 4.4 - 4.8 4.4 - 4.8 4.3 - 4.7 4.3 - 4.7 4.3 - 4.7 4.3 - 4.7 5.2 - 5.6 5.2 - 5.6 5.2 - 5.6 5.2 - 5.6 5.0 - 5.4 5.0 - 5.4 5.0 - 5.4 5.0 - 5.4 4.9 - 5.3 4.9 - 5.3 4.9 - 5.3 4.9 - 5.3 4.7 - 5.1 4.7 - 5.1 4.7 - 5.1 4.7 - 5.1 4.6 - 5.0 4.6 - 5.0 4.6 - 5.0 4.6 - 5.0 4.5 - 4.9 4.5 - 4.9 4.5 - 4.9 4.5 - 4.9 4.4 - 4.8 4.4 - 4.8 4.4 - 4.8 4.4 - 4.8 4.3 - 4.7 4.3 - 4.7 4.3 - 4.7 4.3 - 4.7
Thick- Dimensions ness mm mm 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10 3 5 8 10
125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 125 x 125 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250 250 x 250
Price EURO 210.00 261.00 356.00 167.00 210.00 261.00 356.00 167.00 210.00 261.00 356.00 167.00 210.00 261.00 356.00 167.00 210.00 261.00 356.00 167.00 210.00 261.00 356.00 491.00 563.00 696.00 1,038.00 491.00 563.00 696.00 1,038.00 491.00 563.00 696.00 1,038.00 491.00 563.00 696.00 1,038.00 491.00 563.00 696.00 1,038.00 491.00 563.00 696.00 1,038.00 491.00 563.00 696.00 1,038.00 491.00 563.00 696.00 1,038.00
Separation Technology - Round Filters and Membranes
Filtration
THOMAPOR®-Non-Woven Fabric Filter made of Sinter Metal Fibres Product specification
• Very small pore size with high flow rate and high uptake capacity for dirt particles at the same time. • The filtration characteristic is depicted by retention of smallest particles (dirt particles). • High pressure loadability with material stability in one. Even under extreme load no fibre release occurs. • Repeated sterilization at highest temperatures allowed. • Permissive temperature load up to max. +500 °C. • The non-woven filter can be cutted, plied and welded without problems. • High corrosion resistance, made of high-quality steel 1.4404 • Dimensions: 147.5 x 187.5 mm
Item 53348 53350 53351 53358 53360 53361 53363 53365 53366 53370 53372 53373
Item 52763 52764 52765 52766 52767 52770 1
Filter Bubble Max. Dirt fineness Point flow rate pick-up gases1 µm mbar l/min. mg/cm² 10 20 30 10 15 40
37 18.5 12.3 37 24.7 9.3
125 400 800 108 180 620
2 2 2 3.7 6 11
Thickness
Price
mm
EURO
0.13 0.13 0.13 0.38 0.38 0.65
107.00 117.00 127.00 131.00 148.00 204.00
Air (l/min. x dm2 at 2 mbar)
Outside Ø mm
Pore size µm
Unit piece
Price EURO
13 13 13 25 25 25 47 47 47 50 50 50
1.2 0.45 0.2 1.2 0.45 0.2 1.2 0.45 0.2 1.2 0.45 0.2
100 100 100 100 100 100 100 100 100 100 100 100
104.00 104.00 104.00 130.00 130.00 130.00 169.00 169.00 169.00 182.00 182.00 182.00
THOMAPOR®-Membrane made of Cellulose Nitrate Application area
• Microbiology, transfer and blotting technology, ELISAs and RIAs
Product specification
Dry filter made of biologically inert 100 % pure cellulose nitrate; of good wettability and high flexibility. Amount of extractable components approx. 1.5 % by weight. • R1: Prefiltration, dust counting technique, separation of cells from viscous media, separation of yeast and fibres • R2: Protein testing, transfer media for DNA/RNA • R3: Production of ultrapure fluids, concentration and separation of phages and viruses, use in microbiological investigations.
Round Filters and Membranes THOMAPOR®-Membrane made of Cellulose Acetate Application area
• Process filtration • Sterile filtration in pharmacy • Clarification in pharmacy • Determination of residues in used mineral oils and hot gases • For sterility testing in radiochemical investigations
Product specification
• Resistant to dry heat up to +180 °C, to short chain alcohols as well as to oily solutions. Cellulose acetate membranes are extremely dimensionally stable in aqueous solutions and have a very low binding capacity particularly for proteins. The amount of extractable components is below 2 % by weight.
Item 53047 53048 53053 53060 53061 53062 53067
Type
Outside Ø mm
Pore size µm
Unit piece
Price EURO
R1 R1 R2 R1 R1 R1 R2
25 25 25 47 47 47 47
8 5 0.45 12 8 5 0.45
100 100 100 100 100 100 100
143.00 143.00 130.00 195.00 195.00 195.00 182.00
THOMAPLAST® I - 2015 75
Separation Technology - Round Filters and Membranes Item 53071 53076 53077 53078 53083
Type
Outside Ø mm
Pore size µm
Unit piece
Price EURO
R3 R2 R1 R1 R2
47 50 50 50 50
0.1 12 8 5 0.45
100 100 100 100 100
182.00 221.00 221.00 221.00 195.00
Filtration
Technical specification
• Material: PES (polyether sulfone) • Thickness: approx. 150 µm • Max. temperature: +100 °C • Sterilization: autoclavable (+121 °C)
THOMAPOR®-Membrane made of Regenerated Cellulose Application area
• They meet highest requirements in pharmaceutical applications • For purification of organic solvents, photoresists and concentrated short-chain alcohols as well as in water chemistry and in dust counting technique
Item
Outside Ø
Pore size
mm
µm
15163 15164 15165 15166 15167 15168 15169 15171 15172 15173 15174 15175 15176 15177 15182 15195 15196 15197 15198 15199 15200 15201
13 25 37 47 50 90 142 13 25 37 47 50 90 142 47 13 25 37 47 50 90 142
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.45 1.2 1.2 1.2 1.2 1.2 1.2 1.2
Product specification
• Inserted in filtering apparatuses the membrane can be steamed or sterilized with hot air at +180 °C. The filter type R6 can be autoclaved at +136 °C without problems. The filter is flexible, dimensionally stable and of remarkable wet strength. The membrane is resistant to organic solvents to a high degree.
Item 53440 53441 53443 53445 53446 53450 53451 53455 53456 53457 53458
Outside Ø mm
Pore size µm
Unit piece
Price EURO
13 13 25 25 25 47 47 50 50 50 50
0.45 0.2 1 0.45 0.2 0.45 0.2 1 0.6 0.45 0.2
100 100 100 100 100 100 100 100 100 100 100
156.00 156.00 195.00 195.00 195.00 247.00 247.00 260.00 260.00 260.00 260.00
1
Max. Max. Unit flow rate flow rate 1 2 gases liquids l/min. ml/min. piece 1 1 1 1 1 1 1 3 3 3 3 3 3 3 5 13 13 13 13 13 13 13
5 5 5 5 5 5 5 22 22 22 22 22 22 22 44 700 700 700 700 700 700 700
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Price EURO 40.00 40.00 60.00 60.00 65.00 150.00 275.00 40.00 40.00 60.00 60.00 65.00 150.00 275.00 60.00 40.00 40.00 60.00 60.00 65.00 150.00 275.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR®-Round Filter made of PSU Application area
THOMAPOR®-Round Filter made of PES
• Prefiltration and clarification of bioactive solutions as well as sterile filtration of solutions and gases
Application area
Product specification
• Prefiltration and clarification of aqueous solutions • Particle and aerosol filtration of gases in the areas of bio- and food processing technology, chemical and physical laboratory engineering, environmental technology and chemical nuclear technology
• Biocompatible, hydrophilic round filter made of chemically inert, high-strength high-tech polymer material with regular pore structure for high flow rates, very low protein binding, temperature-loadable, sterilizable by autoclaving at +121 °C.
Product specification
Technical specification
• Hydrophilic filter made of chemically inert, high-strength polymer material with regular pore structure for high flow rates; biocompatible, certified according to USP Class VI „Plastics Test“, sterilizable by autoclaving.
76 THOMAPLAST® I - 2015
• Material: PSU (polyether sulfone) • Thickness: approx. 165 µm • Max. temperature: +115 °C • Sterilization: autoclavable (+121 °C)
Separation Technology - Round Filters and Membranes
Filtration Item
Item
Outside Ø
Pore size
mm
µm
15203 15204 15205 15206 15207 15208 15209 15211 15212 15213 15214 15215 15216 15217
13 25 37 47 50 90 142 13 25 37 47 50 90 142
0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.45 0.45 0.45 0.45 0.45 0.45 0.45
1
Max. Max. Unit flow rate flow rate gases1 liquids2 l/min. ml/min. piece 3 3 3 3 3 3 3 7 7 7 7 7 7 7
10 10 10 10 10 10 10 50 50 50 50 50 50 50
25 25 25 25 25 25 25 25 25 25 25 25 25 25
Pore size
mm
µm
150672 150682 150692 150702 150712 150722 150732 150753 150763 150773 150783 150793 150803 150813 150863
13 25 37 47 50 90 142 13 25 37 47 50 90 142 47
0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 1.2 1.2 1.2 1.2 1.2 1.2 3
Price EURO 40.00 45.00 55.00 60.00 60.00 165.00 250.00 40.00 45.00 55.00 60.00 60.00 165.00 250.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR -Round Filter made of Acrylic Polymer for Fluids ®
Application area
• Clarification and fine filtration of aqueous solutions in the areas of biology and environment.
Product specification
Outside Ø
• Hydrophobic round filter based on polymer fibres with pore sizes between 0.2 and 10 µm, non-woven support body; biocompatible, certified according to USP Class VI-121 „Plastic Tests“, good chemical resistance, not autoclavable.
Max. Bubble flow rate Point gases1 l/min. bar 40 40 40 40 40 40 40 25 25 25 25 25 25 25 55
0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.2
Unit
Price
piece
EURO
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
40.00 50.00 65.00 65.00 70.00 170.00 290.00 40.00 50.00 65.00 65.00 70.00 170.00 290.00 65.00
Air (l/min./3.7 cm2) 2 Flow rate at 0.93 bar 3 Flow rate at 0.34 bar 4 Flow rate at 0.29 bar
1
THOMAPOR®-Round Filter made of Glass Fibre Application area
• In the areas of bio- and food processing technology, chemical and physical laboratory engineering, environmental technology and chemical nuclear technology
Product specification
• Prefiltration and clarification of hot or aggressive solutions • Particle and aerosol filtration of gases • Chemically and physically highly resistant, binderless 1 µm glass fibre round filter for high flow rates, with good wet stability and high retention capacity, sterilizable with all methods.
Technical specification
• Material: borosilicate fibre • Thickness: approx. 450 µm • Retention capacity for aerosols: >99.97 % • Measuring conditions: Filter area 100 cm2; nominal particle size 0.3 µm; air throughput: approx. 30 l/min.
Technical specification
• Material: repellent acrylic copolymer fibre • Thickness: 65 - 130 µm • Max. temperature: +88 °C • Sterilization: gas (formalin, ethylene oxide)
Item 15043 15044 15045 15046
Outside Ø mm 13 25 37 47
Max. flow Max. flow Unit rate gases1 rate liquids2 l/min. ml/min. piece 50 50 50 50
500 500 500 500
100 100 100 100
Price EURO 50.00 60.00 70.00 80.00
THOMAPLAST® I - 2015 77
Separation Technology - Round Filters and Membranes Item 15047 15048 15049 1
Outside Ø mm
Max. flow Max. flow Unit rate gases1 rate liquids2 l/min. ml/min. piece
50 90 142
50 50 50
500 500 500
Filtration
Price EURO
100 80.00 50 190.00 25 170.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR®-Capillary Pore Membrane made of Polycarbonate Application area
• Polycarbonate membranes are recommended for microscopic, chemotactic and cytological studies as well as aerosol filtration and subsequent analysis by X-ray fluorescence spectroscopy. 12.0 and 10.0 µm: general purification, prefiltration, purification and preliminary filtration of caustic fluids such as photoresist, concentrated acids, ester solutions 8.0 µm: as 12.0 µm: microfiltration of alcohols, of chemicals used as reagents 5.0 µm: in cytology, chemotaxis, and gravimetric analysis 3.0 µm: general microfiltration and purification; cytological evaluation of cerebrospinal fluids, chemotaxis, microfiltration of caustic fluids 2.0 µm: chemotaxis 1.0 µm: beer stabilization, prefiltration of serum, ultrapurification of fluids, ultrapurifications of caustic fluids, microfiltration of alcoholic solutions 0.8 µm: aerosol analysis, gravimetric analysis, wine stabilization, microscopic analysis of aerosols, yeasts and mould fungi 0.6 µm: biological determination of cells, wine and milk, plasmapheresis, particle analysis in caustic fluids 0.4 µm: biological determination of fluids, collection of asbestos fibres, dehydration and purification of cellular suspensions, immunology, particle analysis of caustic fluids, analysis of yeast, mould fungi and silicon oxide (silica) 0.2 µm: general sterile filtration, immunology, sterile filtration of caustic fluids 0.1 and 0.08 µm: virus filtration 0.05; 0.03 and 0.015 µm: virus and protein filtration
Product specification
• Membranes can stand permanent temperatures of +140 °C (air or steam) for an indefinite time allowing repeated autoclaving. Polyester membranes are hydrophilic with chemical resistance similar to PTFE. Polyester membranes are recommended for filtration of HPLC solutions and samples which are to be analyzed by HPLC.
Technical specification
• Thickness: 5 - 10 µm • Bursting pressure: >10 bar • Weight (tare): 1.0 mg/cm2 • Density: 1.2 g/cm3 • Temperature range for heat-sealing: +230 to +275 °C • Max. temperature: +140 °C • Ash weight: 0.92 µg/cm2 • Porosity: 5 - 10 % • Number density of pores: 105 - 6 x 108 pores/cm2 • Surface structure: flat and smooth • Optical properties: translucent • Hydrophilia: hydrophilic • Release of fibres: none • Sterilization: autoclavable (+121 °C) • Water absorption: 0.24 % by weight • Biological compatibility: inert
78 THOMAPLAST® I - 2015
Item 50559 50578 50597 50616 50635 50654 50673 50692 50711 50730 50749 50787 50768 50825 50541 50560 50579 50598 50617 50636 50655 50674 50693 50712 50731 50750 50788 50769 50807 50826 50542 50561 50580 50599 50637 50656 50675 50713 50751 50789 50770 50808 50827 50543 50562 50581
Outside Ø mm
Pore size µm
Unit piece
Price EURO
13 13 13 13 13 13 13 13 13 13 13 13 13 13 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 37 37 37 37 37 37 37 37 37 37 37 37 37 43 43 43
10 8 5 3 2 1 0.8 0.6 0.4 0.2 0.1 0.08 0.05 0.015 12 10 8 5 3 2 1 0.8 0.6 0.4 0.2 0.1 0.08 0.05 0.03 0.015 12 10 8 5 2 1 0.8 0.4 0.1 0.08 0.05 0.03 0.015 12 10 8
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
230.00 230.00 230.00 230.00 230.00 230.00 230.00 230.00 180.00 180.00 310.00 370.00 320.00 490.00 260.00 230.00 230.00 230.00 230.00 230.00 230.00 230.00 230.00 190.00 190.00 350.00 480.00 450.00 490.00 550.00 350.00 350.00 280.00 280.00 280.00 280.00 280.00 240.00 480.00 610.00 610.00 610.00 610.00 370.00 370.00 330.00
Separation Technology - Round Filters and Membranes Item 50600 50619 50638 50657 50714 50752 50790 50809 50544 50563 50582 50601 50620 50639 50658 50677 50696 50715 50734 50753 50791 50772 50810 50545 50564 50583 50602 50621 50640 50659 50678 50697 50716 50735 50792 50773 50811 50546 50603 50698 50793 50549 50587 50606 50644 50663 50682
Outside Ø mm
Pore size µm
Unit piece
Price EURO
43 43 43 43 43 43 43 43 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 50 50 50 50 50 50 50 50 50 50 50 50 50 50 76 76 76 76 90 90 90 90 90 90
5 3 2 1 0.4 0.1 0.08 0.03 12 10 8 5 3 2 1 0.8 0.6 0.4 0.2 0.1 0.08 0.05 0.03 12 10 8 5 3 2 1 0.8 0.6 0.4 0.2 0.08 0.05 0.03 12 5 0.6 0.08 12 8 5 2 1 0.8
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
330.00 330.00 330.00 330.00 300.00 590.00 710.00 710.00 380.00 350.00 330.00 330.00 330.00 330.00 330.00 330.00 330.00 270.00 270.00 690.00 810.00 810.00 810.00 450.00 440.00 380.00 380.00 380.00 380.00 380.00 380.00 380.00 330.00 330.00 860.00 860.00 860.00 650.00 560.00 550.00 1,150.00 800.00 740.00 740.00 780.00 740.00 740.00
THOMAPOR®-High-Chem Polymer Membranes General technical specification
• Material: PA (polyamide); PESH (polyether sulfone, hydrophilic) PS (polysulfone); PAEK (polyacryl etherketone)
Filtration
THOMAPOR®-Polymer Membrane - round blank Item 303010 303022 1
Max. op. pressure 11 bar
Max. temp. °C
pH range
Max. flow rate liquids2 l/h
30 10
50 70
4 - 11 1 - 13
200 250
at +20 °C 2 Water (l/h x m2 x bar)
Item 303010 303022
Cut off kDalton
Material
Outside Ø mm
Unit piece
Price EURO
0.2 20
PA PS
76 76
25 25
194.00 194.00
THOMAPOR®-High-Chem Polymer Membrane cutting Item 302983 302984 302985 302986 302987 302988 302989 302990 302991 302992 302993 302994 302995 302996 302997 302998 302999 303000 303001 303002 303003 303004 1
Max. op. pressure 11 bar
Max. temp. °C
pH range
Max. flow rate liquids2 l/h
100 100 50 50 30 30 25 25 15 15 10 10 10 10 10 10 10 10 10 10 10 10
50 50 50 50 50 50 50 50 50 50 70 70 70 70 70 70 70 70 70 70 70 70
4 - 11 4 - 11 4 - 11 4 - 11 4 - 11 4 - 11 4 - 11 4 - 11 4 - 11 4 - 11 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13
40 40 70 70 200 200 300 300 310 310 520 520 630 630 850 850 250 250 800 800 1,200 1,200
at +20 °C 2 Water (l/h x m2 x bar)
THOMAPLAST® I - 2015 79
Separation Technology - Round Filters and Membranes
Filtration
Technical specification
• Material: PVDF (polyvinylidene fluoride) • Thickness: approx. 180 µm • Pore size: 0.2 or 0.45 µm • Max. temperature: +100 °C • Sterilization: autoclavable (+121 °C) Item
Item 302983 302984 302985 302986 302987 302988 302989 302990 302991 302992 302993 302994 302995 302996 302997 302998 302999 303000 303001 303002 303003 303004
Type
Cut off kDalton
Material
Dimensions mm
Price EURO
1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11
0.05 0.05 0.1 0.1 0.2 0.2 0.5 0.5 2 2 4 4 50 50 100 100 20 20 100 100 100 100
PA PA PA PA PA PA PA PA PA PA PESH PESH PESH PESH PESH PESH PS PS PS PS PAEK PAEK
200 x 300 450 x 500 200 x 300 450 x 500 200 x 300 450 x 500 200 x 300 450 x 500 200 x 300 450 x 500 200 x 300 450 x 500 200 x 300 450 x 500 200 x 300 450 x 500 225 x 250 450 x 500 200 x 300 450 x 500 200 x 300 450 x 500
125.00 335.00 125.00 335.00 125.00 335.00 125.00 335.00 125.00 335.00 95.00 280.00 95.00 280.00 95.00 280.00 95.00 280.00 95.00 280.00 105.00 300.00
THOMAPOR®-High-Chem Round Filter made of PVDF - hydrophilic Application area
• Fine filtration and sterile filtration of solutions and gases in areas of analytical chemistry.
Product specification
• Chemically highly resistant, slightly hydrophilic round filter without support body; biocompatible, free of leachable components.
Outside Ø
Pore size
mm
µm
15219 15220 15221 15222 15223 15224 15225 15227 15228 15229 15230 15231 15232 15233
13 25 37 47 50 90 142 13 25 37 47 50 90 142
0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.45 0.45 0.45 0.45 0.45 0.45 0.45
1
Max. Max. Unit flow rate flow rate gases1 liquids2 l/min. ml/min. piece 1 1 1 1 1 1 1 2 2 2 2 2 2 2
3.5 3.5 3.5 3.5 3.5 3.5 3.5 13.2 13.2 13.2 13.2 13.2 13.2 13.2
25 25 25 25 25 25 25 25 25 25 25 25 25 25
EURO 55.00 60.00 75.00 85.00 90.00 215.00 290.00 55.00 60.00 75.00 85.00 90.00 215.00 290.00
Air (l/min. x cm2 at 0.7 bar) 2 Water (ml/min. x cm2 at 0.7 bar)
THOMAPOR®-High-Chem Round Filter made of PVDF - hydrophobic Application area
• Fine filtration of solvents and gases in areas of analytical chemistry and laboratory engineering.
Product specification
• Chemically highly resistant, hydrophobic round filter without support body; biocompatible, free of leachable components.
Technical specification
• Material: PVDF (polyvinylidene fluoride) • Thickness: approx. 180 µm • Pore size: 0.45 µm
Item 15235 15236 15237 15238 15239 15240 15241 1
Outside Ø mm
Pore size µm
13 25 37 47 50 90 142
0.45 0.45 0.45 0.45 0.45 0.45 0.45
Max. flow Unit rate gases1 l/min. piece 2 2 2 2 2 2 2
25 25 25 25 25 25 25
Air (l/min. x cm2 at 0.7 bar)
THOMAPOR®-High-Chem Round Filter made of PTFE - sintered Application area
• For all laboratory applications requiring unlaminated and stable membranes. • Can be used as air filter, gas filter and liquid filter
80 THOMAPLAST® I - 2015
Price
Price EURO 75.00 85.00 95.00 100.00 105.00 290.00 570.00
Separation Technology - Round Filters and Membranes
Filtration
THOMAPOR®-High-Chem Round Filter made of PTFE - drawn
Product specification
• Hydrophobic • High pore volume • Outstandingly chemical-resistant and stable to solvents • High thermal resistance • Mechanically stable • Self-sealing, when clamped between flanges • Biocompatible and rotting-resistant • Weldable, self-cleaning and non-inflammable
Application area
• Fine filtration of chemically aggressive media and solvents, also halogen-containing solvents • Sterile filtration, purification of gases
Product specification
• Hydrophobic • Outstandingly chemical-resistant and stable to solvents • Regular pore size and narrow-ranged pore size distribution • Strong, flexible and great thermal resistance • Universally applicable, non-inflammable and self-sealing • Inert to fungal and bacterial growth • Weldable
Technical specification
• Material: sliced polytetrafluoroethylene (PTFE) • Thickness: depending on type 100 to 250 µm • Pore volume: >40 % • Temperature range: -260 to +260 °C • Sterilization: by autoclaving
Technical specification
• Material: drawn polytetrafluoroethylene (PTFE) • Colour: white, smooth surface • Thickness: depending on type 60 to 100 µm • Pore size: 0.1; 0.2; 0.65; 0.8; 1.2 or 5 µm • Temperature range: -260 to +250 °C • Melting point: +327 °C • Sterilization: autoclavable (+121 °C) • Tensile strength: 250 - 350 kg/cm2 • Stretchability: 200 - 400 %
Item
Outside Ø
Pore size
mm
µm
15310 15311 15312 15313 15314 15315 15316 15317 15302 15303 15304 15305 15306 15307 15308 15309 15294 15295 15296 15297 15298 15299 15300 15301 15288
13 25 37 47 50 54 90 142 13 25 37 47 50 54 90 142 13 25 37 47 50 54 90 142 47
1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 5-6 5-6 5-6 5-6 5-6 5-6 5-6 5-6 10 - 20
1
Thick- Max. Max. Unit Price ness flow rate flow rate gases liquids1 µm l/h ml/min. piece EURO 254 254 254 254 254 254 254 254 152 152 152 152 152 152 152 152 100 100 100 100 100 100 100 100 100
19 19 19 19 19 19 19 19 112 112 112 112 112 112 112 112 140 140 140 140 140 140 140 140 180
Water (ml/min. x cm2 at 0.9 bar) 2 for ethanol
100 100 100 100 100 100 100 100 224 224 224 224 224 224 224 224 300 300 300 300 300 300 300 300 430
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
75.00 85.00 95.00 105.00 110.00 110.00 255.00 510.00 75.00 85.00 95.00 105.00 110.00 110.00 255.00 510.00 75.00 85.00 95.00 105.00 110.00 110.00 255.00 510.00 105.00
Item
Outside Ø
Pore size
mm
µm
15326 15327 15328 15329 15330 15331 15332 15335 15350 15351 15352 15353 15354 15355 15356 15361 15366 15367 15368
13 25 37 47 50 90 142 25 13 25 37 47 50 90 142 47 13 25 37
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.8 1 1 1
Thick- Max. Max. Unit Price ness flow rate flow rate gases1 liquids2 µm l/min. ml/min. piece EURO 60 60 60 60 60 60 60 60 80 80 80 80 80 80 80 100 100 100 100
1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.8 9 9 9 9 9 9 9 12 13 13 13
32 32 32 32 32 32 32 65 190 190 190 190 190 190 190 270 450 450 450
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
105.00 120.00 140.00 155.00 155.00 400.00 805.00 120.00 105.00 120.00 140.00 155.00 155.00 400.00 805.00 155.00 105.00 120.00 140.00
THOMAPLAST® I - 2015 81
Separation Technology - Round Filters and Membranes Item
Outside Ø
Pore size
mm
µm
15369 15370 15371 15372 15374 15375 15376 15377 15378 15380 15381
47 50 90 142 13 25 37 47 50 90 142
1 1 1 1 5 5 5 5 5 5 5
1
Thick- Max. Max. Unit Price ness flow rate flow rate gases1 liquids2 µm l/min. ml/min. piece EURO 100 100 100 100 100 100 100 100 100 100 100
13 13 13 13 30 30 30 30 30 30 30
450 450 450 450 1,300 1,300 1,300 1,300 1,300 1,300 1,300
25 25 25 25 25 25 25 25 25 25 25
155.00 155.00 400.00 805.00 105.00 120.00 140.00 155.00 155.00 400.00 805.00
Air (l/min. x cm2 at 0.9 bar) 2 Aceton (ml/min. x cm2 at 0.9 bar)
THOMAPOR®-High-Chem Round Filter made of PTFE Application area
• Filter membranes for filtration of critical media in laboratory and process filtration. • For air, gas and aerosol filtration.
Product specification
• The material is resistant to strongest organic and inorganic compounds. • Test and process temperatures up to +260 °C do not cause any problems just as use at the freezing point. • The membranes feature a homogeneous honeycombed pore structure; the material is pure PTFE resin, tightly spun thus ruling out detaching of membrane fibres or particles. • Due to the structure characteristics the membrane is best suited for deep-bed filtration just as for surface filtration. • THOMAPOR®-PTFE membranes meet highest requirements and are used with THOMAPLAST®-filter holders made of PFA
Filtration
ZITEX®-High-Chem Round Filter made of PTFE Product specification
• Ultra-pure; chemically inert • Use for filtration of corrosive liquids or gases up to +204 °C, depending on application • Compatible with virtually all solutions, non-clogging • Fine and extra-fine grades may shrink at temperatures above +66 °C. • Zitex® membranes act as „depth filters“ with high retention efficiency and non-clogging characteristics. They are used for filtration of corrosive and other aggressive chemicals or gases up to +204 °C. Unlike cellulose filter paper, the PTFE interstices are bonded together resulting in a stabilized pore configuration. This unique combination of depth filter and screen characteristics creates a highly effective filter media. Zitex® membranes have a better controlled pore size distribution than other high temperature, chemically resistant membranes with similar pore size ratings. • Zitex® filters are strong enough to be self supporting and may be used without any additional backing material, which could compromise results. The non-stick nature of Zitex® provides excellent filter cake release properties. • Zitex® may be sterilized with steam or bactericidal solutions. It is suitable for chromatography solvent filtration and degassing. Zitex® membranes are inherently hydrophobic, which makes them ideal as venting devices. However, aqueous solutions may be filtered by using pressures exceeding the membrane’s water initiation pressure, or with the aid of wetting agents, such as methanol or ethanol. Disks are interleaved with separators for cleanliness and ease of handling.
Item
Item 72546 72547 72537 72538 72539 72545 72540 72541 72542 72543
Outside Ø mm
Pore size µm
Thickness mm
Unit piece
Price EURO
47 47 47 47 47 47 50 50 50 50
0.2 0.45 1-2 5-6 20 - 30 30 - 60 1-2 5-6 20 - 30 30 - 60
0.65 0.07 0.25 0.1 0.14 0.2 0.25 0.1 0.14 0.2
10 10 10 10 10 10 10 10 10 10
185.00 185.00 98.00 98.00 98.00 98.00 106.00 106.00 106.00 106.00
82 THOMAPLAST® I - 2015
602921 602971 603021 603071 603121 60302 60307 60312 60293 60298 60303 60308 60304 60309 60300 60305 60310 60306
Outside Ø mm
Pore size µm
Thickness mm
47 47 47 47 47 75 75 75 90 90 90 90 110 110 125 125 125 150
1-3 3-5 10 - 20 20 - 30 30 - 60 10 - 20 20 - 30 30 - 60 1-3 3-5 10 - 20 20 - 30 10 - 20 20 - 30 3-5 10 - 20 20 - 30 10 - 20
0.25 0.2 0.13 0.15 0.18 0.13 0.15 0.18 0.25 0.2 0.13 0.15 0.13 0.15 0.2 0.13 0.15 0.13
Max. flow Unit rate liquids1 ml/min. piece 120 200 320 620 1,800 320 620 1,800 120 200 320 620 320 620 200 320 620 320
10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5
Price EURO 115.00 115.00 115.00 115.00 115.00 151.00 151.00 151.00 196.00 196.00 196.00 196.00 239.00 239.00 207.00 207.00 207.00 167.00
Separation Technology - Round Filters and Membranes Item 60311 60316 1
Outside Ø mm
Pore size µm
Thickness mm
150 150
20 - 30 30 - 60
0.15 0.18
Max. flow Unit rate liquids1 ml/min. piece 620 1,800
5 5
Price EURO
Filtration Item 94473 94420 94421 94422 94423 94424 94425 94426 94427 94475 94476 94477 94431 94435 94439 94454 94432 94436 94440 94455 94433 94437 94441 94456
167.00 167.00
Water (ml/min. x cm2 x bar) 2 for ethanol
THOMAPOR®-Filters made of PVC Application area
• For production of ultrapure water of 1-18 megohm quality. • Microfiltration; suspension of starch, resins, activated carbon; precipitation of proteins, barium sulfate, silicic acid. Bacteria and spores are retained completely allowing sterile preparation of water and air for enzymes, sterile rooms and bacteriological cultures. For collection of dust samples in the air. • In food processing and beverage industry as well as in the pharmaceutical industry. • Filtration of drinking water, for filtration of organic materials and recovery of noble metals from electroplating solutions. • Pretreatment for reverse osmosis.
General product specification
• High filtration precision: • The membrane filters have a regular pore size distribution allowing precise filtration. • Wide pore size range: • The membrane filters are available with pore sizes 0.1; 0.2; 0.4 and 0.9 µm. Pore sizes are verified with „mercury intrusion“ and „bubble point test“. • Flexibility and high mechanical stability: • The membrane filters maintain their physical properties even in strongly altered working conditions. • No shape change during boiling test: • Longer exposition to boiling water has no impact on the physical properties of the membrane filters. • Autoclaving: • The membrane filters are temperature-resistant up to +125 °C and insensitive to commonly used hot sterilization procedures such as autoclaving or in-situ steam sterilization.
Outside Ø mm
Pore size µm
Unit piece
Price EURO
13 25 25 25 25 47 47 47 47 50 50 50 55 55 55 55 70 70 70 70 90 90 90 90
0.9 0.1 0.2 0.4 0.9 0.1 0.2 0.4 0.9 0.2 0.4 0.9 0.1 0.2 0.4 0.9 0.1 0.2 0.4 0.9 0.1 0.2 0.4 0.9
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 50 25 25 25
35.00 45.00 45.00 45.00 45.00 80.00 80.00 80.00 80.00 90.00 90.00 90.00 100.00 100.00 100.00 100.00 130.00 130.00 130.00 130.00 180.00 180.00 180.00 180.00
THOMAPOR®-Filter Cutting made of PVC
Item 94430 94434 94438
Pore size µm
Dimensions mm
Unit piece
Price EURO
0.1 0.2 0.4
300 x 300 300 x 300 300 x 300
1 1 1
192.00 192.00 192.00
THOMAPOR®-Filter Plate made of PVC
General technical specification
• Max. temperature: +90 °C, for a short time up to +105 °C • pH range: 1 - 12 at +35 °C • Hot air resistance: up to +125 °C
THOMAPOR®-Round Filter made of PVC
Item
Item 94471 94472
Outside Ø mm
Pore size µm
Unit piece
Price EURO
13 13
0.2 0.4
50 50
35.00 35.00
94446 94447 94448 94458 94449 94450 94451 94459
Pore size µm
Width mm
Unit m
Price EURO
0.1 0.2 0.4 0.9 0.1 0.2 0.4 0.9
300 300 300 300 600 600 600 600
15 15 15 15 15 15 15 15
1,118.00 1,118.00 1,118.00 1,118.00 2,043.00 2,043.00 2,043.00 2,043.00
THOMAPLAST® I - 2015 83
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats Item
Screen Cloths, Filter Cloths, Fleeces and Mats THOMAPOR®-Screen Cloth made of Polyester Application area
• Cloth for screening and filtering purposes
General product specification
• Polyester monofilament (PET) features high weave quality, precision and regularity of mesh sizes. The cloth is insensitive to vibrations and highly resistant to fatigue caused by vibrations and bending. It does not crack and features very high abrasion resistance and resilience. • Moderate abrasion and hydrolysis resistance • Good resistance to solvents and acids • Poor UV-resistance
General technical specification
• Material: polyester • Density: 1.38 g/mm3 • Tensile strength: 45 - 75 daN/mm2 • Relative strength at wet conditions: 100 % • Elongation at break: 15 - 30 % • Moisture uptake: 0.4 % (at +20 °C and 65 % r.h.) • Melting point: +255 °C • Softening temperature: +230 °C • Temperature range: -75 to +150 °C (dry heat resistance at permanent load up to +150 °C)
THOMAPOR®-Screen Cloth made of Polyester cutting Product specification
• Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
Item
Ø thread µm
Open area %
Thickness µm
Dimensions
Mesh size µm
cm
EURO
95801 95802 95803 95804 95805 95806 95807 95808 95809 95810
4,000 3,000 2,200 2,000 1,600 1,410 1,000 840 800 710
1,000 800 800 800 450 600 500 400 280 350
64 62 37.4 51 61 49 45 46 55 45
1,900 1,480 1,450 1,500 840 1,300 1,000 785 520 745
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29
44.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00
84 THOMAPLAST® I - 2015
Price
Filtration Ø thread µm
Open area %
Thickness µm
Dimensions
Mesh size µm
Price
cm
EURO
95811 95812 95813 95814 95815 95816 95817 95818 95819 95820 95821 95822 95823 95824 95825 95826 95827 95828 95830 95831 95832 95833 95834 95835 95836 95837 95838 95839 95840 95841 95842 95843 95844 95845 95846 95847 95848 95849 95850 95851 95852 95853 95854 95855 95856 95857
600 500 400 300 250 200 150 100 90 80 73 59 51 40 33 31 20 11 4,000 3,000 2,200 2,000 1,600 1,410 1,000 840 800 710 600 500 400 300 250 200 150 100 90 80 73 59 51 40 33 31 20 11
245 220 188 143 152 104 86 77 72 62 43 44 38 40 40 46 37 38 1,000 800 800 800 450 600 500 400 280 350 245 220 188 143 152 104 86 77 72 62 43 44 38 40 40 46 37 38
51 48 48 46 39 43 41 32 31 32 40 33 33 25 20.5 16.5 13 5 64 62 37.4 51 61 49 45 46 55 45 51 48 48 46 39 43 41 32 31 32 40 33 33 25 20.5 16.5 13 5
450 410 335 245 290 170 140 125 115 90 65 65 60 60 60 75 60 60 1,900 1,480 1,450 1,500 840 1,300 1,000 785 520 745 450 410 335 245 290 170 140 125 115 90 65 65 60 60 60 75 60 60
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102
47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 49.00 49.00 49.00 49.00 64.00 67.00 72.00 100.00 110.00 187.00 167.00 167.00 167.00 167.00 177.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 177.00 177.00 177.00 192.00 205.00 261.00 292.00 356.00 407.00 458.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats THOMAPOR®-Screen Cloth made of Polyester round blank
Item
Item 95858 95859 95860 95861 95862 95863 95864 95865 95866 95867 95868 95869 95870 95873 95874 95875 95876 95877 95878 95879 95880 95881 95882 95883 95884 95885 95886 95887 95888 95889 95890 95891 95892 95893 95894 95895 95896 95897 95898 95899 95900 95901
Outside Mesh Ø Open Ø size thread area mm µm µm % 13 13 13 13 13 13 13 13 13 13 13 13 13 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 47 47 47 47 47 47 47 47 47 47 47 47 47 47
11 20 31 40 59 80 100 200 300 500 710 800 1,000 11 20 31 40 59 80 100 200 300 500 710 800 1,000 2,000 3,360 11 20 31 40 59 80 100 200 300 500 710 800 1,000 2,000
38 37 46 40 44 62 77 104 143 220 350 280 500 38 37 46 40 44 62 77 104 143 220 350 280 500 800 1,000 38 37 46 40 44 62 77 104 143 220 350 280 500 800
5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 51 59.5 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 51
Thick- Unit ness µm piece 60 60 75 60 65 90 125 170 245 410 745 520 1,000 60 60 75 60 65 90 125 170 245 410 745 520 1,000 1,500 2,045 60 60 75 60 65 90 125 170 245 410 745 520 1,000 1,500
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Price EURO 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 130.00 130.00 130.00 200.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 170.00 170.00 170.00 170.00 120.00 120.00 120.00 120.00 120.00 120.00 120.00 120.00 120.00 120.00
95903 95904 95905 95906 95907 95908 95909 95910 95911 95912 95913 95914 95915 95916 95918 95919 95920 95921 95922 95923 95924 95925 95926 95927 95928 95929 95930 95931 95932 95933 95934 95935 95936 95937 95938 95939 95940 95941 95942 95943 95944 95945 95948 95949 95950 95951 95952 95953 95954 95955 95956 95957 95958 95959 95960
Filtration
Outside Mesh Ø Open Ø size thread area mm µm µm % 50 50 50 50 50 50 50 50 50 50 50 50 50 50 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 100 100 100 100 100 100 100 100 100 100 100 100 100 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5
11 20 31 40 59 80 100 200 300 500 710 800 1,000 2,000 11 20 31 40 59 80 100 200 300 500 710 800 1,000 2,000 3,360 11 20 31 40 59 80 100 200 300 500 710 800 1,000 11 20 31 40 59 80 100 200 300 500 710 800 1,000
38 37 46 40 44 62 77 104 143 220 350 280 500 800 38 37 46 40 44 62 77 104 143 220 350 280 500 800 1,000 38 37 46 40 44 62 77 104 143 220 350 280 500 38 37 46 40 44 62 77 104 143 220 350 280 500
5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 51 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 51 59.5 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45
Thick- Unit ness µm piece 60 60 75 60 65 90 125 170 245 410 745 520 1,000 1,500 60 60 75 60 65 90 125 170 245 410 745 520 1,000 1,500 2,045 60 60 75 60 65 90 125 170 245 410 745 520 1,000 60 60 75 60 65 90 125 170 245 410 745 520 1,000
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Price EURO 170.00 170.00 170.00 170.00 140.00 140.00 140.00 140.00 140.00 140.00 140.00 140.00 140.00 140.00 300.00 300.00 300.00 248.00 170.00 170.00 170.00 170.00 170.00 170.00 170.00 170.00 170.00 170.00 170.00 250.00 250.00 250.00 250.00 175.00 175.00 175.00 175.00 175.00 175.00 175.00 175.00 175.00 271.00 271.00 271.00 271.00 164.00 164.00 164.00 164.00 164.00 164.00 164.00 164.00 164.00
THOMAPLAST® I - 2015 85
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats Item 95978 95979 95980 95981 95982 95983 95984 95985 95986 95987 95988 95989 95990 95993 95994 95995 95996 95997 95998 95999 96000 96001 96002 96003 96004 96005 96008 96009 96010 96011 96012 96013 96014 96015 96016 96017 96018 96019 96020 96048 96049 96050 96051 96052 96053 96054 96055 96056 96057 96058 96059 96060
Outside Mesh Ø Open Ø size thread area mm µm µm % 110 110 110 110 110 110 110 110 110 110 110 110 110 142 142 142 142 142 142 142 142 142 142 142 142 142 200 200 200 200 200 200 200 200 200 200 200 200 200 293 293 293 293 293 293 293 293 293 293 293 293 293
11 20 31 40 59 80 100 200 300 500 710 800 1,000 11 20 31 40 59 80 100 200 300 500 710 800 1,000 11 20 31 40 59 80 100 200 300 500 710 800 1,000 11 20 31 40 59 80 100 200 300 500 710 800 1,000
38 37 46 40 44 62 77 104 143 220 350 280 500 38 37 46 40 44 62 77 104 143 220 350 280 500 38 37 46 40 44 62 77 104 143 220 350 280 500 38 37 46 40 44 62 77 104 143 220 350 280 500
86 THOMAPLAST® I - 2015
5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45 5 12.5 16.5 25 33 32 32 43 46 48 45 55 45
Thick- Unit ness µm piece 60 60 75 60 65 90 125 170 245 410 745 520 1,000 60 60 75 60 65 90 125 170 245 410 745 520 1,000 60 60 75 60 65 90 125 170 245 410 745 520 1,000 60 60 75 60 65 90 125 170 245 410 745 520 1,000
50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Filtration
Price
THOMAPOR®-Screen Cloth made of Polyamide
EURO
Application area
228.00 228.00 228.00 205.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 167.00 254.00 254.00 254.00 228.00 190.00 190.00 190.00 190.00 190.00 190.00 190.00 190.00 190.00 537.00 537.00 537.00 430.00 277.00 277.00 277.00 277.00 277.00 243.00 243.00 243.00 243.00 959.00 959.00 959.00 634.00 392.00 392.00 392.00 392.00 392.00 356.00 356.00 356.00 356.00
• Cloth for screening and filtering purposes
General product specification
• Monofil nylon cloth featuring high weave quality, precision and regularity of mesh sizes. It is insensitive to vibrations, highly resistant to fatigue caused by vibrating or bending and does not crack. • Turning yellow and reduction of stability depending on temperature and exposure time • The cloth features very high abrasion resistance, good hydrolysis resistance and resilience. • Poor UV-resistance • Chemical features: Solvent resistance: Good resistance to organic solvents except to dimethylformamide, aniline, cyclohexanone, hot o-dichlorobenzene, phenols and cold m-cresol. Resistance to acids: Is destroyed in cold hydrochloric acid, sulfuric acid, and formic acid etc. depending on concentration. Resistance to alkalis: Very good resistance to alkalis at room temperature.
General technical specification
• Material: PA 6.6 (polyamide 6.6) • Density: 1.14 g/mm3 • Tensile strength: 41 - 67 daN/mm2 • Relative strength at wet conditions: 85 - 90 % • Elongation at break: 20 - 35 % • Moisture uptake: 3.5 - 4 % (at +20 °C and 65 % r.h.) • Melting point: +250 °C • Softening temperature: +230 °C • Temperature range: -40 to +115 °C (turning yellow above +100 °C)
THOMAPOR®-Screen Cloth made of Polyamide cutting Product specification
• Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
Item
Mesh size µm
Ø thread µm
Open area %
Thick- Dimensions Price ness µm cm EURO
948301 948311 948321 948331 948341 948351 948361 948371 948381
2,000 1,000 700 500 400 300 250 200 150
750 515 265 315 250 215 180 150 95
53 43.5 52.5 37.5 38 33.5 34 33 37.5
1,450 1,040 485 580 450 390 290 265 155
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29
49.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 47.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats Item
Mesh size µm
Ø thread µm
Open area %
Thick- Dimensions Price ness µm cm EURO
948391 948401 948411 948421 948431 948441 948451 948461 948471 948302 948312 948322 948332 948342 948352 948362 948372 948382 948392 948402 948412 948422 948432 948442 948452 948462 948472
100 80 60 50 41 30 20 11 5 2,000 1,000 700 500 400 300 250 200 150 100 80 60 50 41 30 20 11 5
77 52 47 40 33 41 34 36 37 750 515 265 315 250 215 180 150 95 77 52 47 40 33 41 34 36 37
32 37 31.5 31 31 18 14 6 1 53 43.5 52.5 37.5 38 33.5 34 33 37.5 32 37 31.5 31 31 18 14 6 1
125 180 75 60 50 60 55 65 100 1,450 1,040 485 580 450 390 290 265 155 125 180 75 60 50 60 55 65 100
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102
47.00 47.00 52.00 52.00 59.00 67.00 85.00 95.00 110.00 172.00 146.00 146.00 146.00 146.00 146.00 146.00 146.00 151.00 169.00 192.00 202.00 210.00 292.00 305.00 376.00 404.00 499.00
THOMAPOR®-Screen Cloth made of Polyamide round blank
Item 95580 95581 95582 95583 95584 95585 95586 95587 95588 95589
Outside Ø mm 13 13 13 13 13 13 13 13 13 13
Mesh Ø Open size thread area µm µm % 5 11 20 30 41 50 60 80 100 150
37 36 34 41 33 40 47 52 77 95
1 6 14 18 31 31 31.5 37 32 37.5
Thick- Unit ness µm piece 100 65 55 60 50 60 75 80 125 155
100 100 100 100 100 100 100 100 100 100
Price EURO 110.00 110.00 110.00 110.00 103.00 103.00 103.00 103.00 103.00 103.00
Item 95590 95591 95594 95595 95596 95597 95598 95599 95600 95601 95602 95603 95604 95606 95608 95609 95610 95611 95612 95613 95614 95615 95616 95617 95618 95620 95622 95623 95624 95625 95626 95627 95628 95629 95630 95631 95632 95634 95636 95637 95638 95639 95640 95641 95642 95643 95644 95645 95646 95650 95651 95652 95653 95654 95655
Filtration
Outside Ø mm 13 13 25 25 25 25 25 25 25 25 25 25 25 25 47 47 47 47 47 47 47 47 47 47 47 47 50 50 50 50 50 50 50 50 50 50 50 50 76 76 76 76 76 76 76 76 76 76 76 100 100 100 100 100 100
Mesh Ø Open size thread area µm µm %
Thick- Unit ness µm piece
200 700 5 11 20 30 41 50 60 80 100 150 200 1,000 5 11 20 30 41 50 60 80 100 150 200 1,000 5 11 20 30 41 50 60 80 100 150 200 1,000 5 11 20 30 41 50 60 80 100 150 200 5 11 20 30 41 50
265 485 100 65 55 60 50 60 75 80 125 155 265 1,040 100 65 55 60 50 60 75 80 125 155 265 1,040 100 65 55 60 50 60 75 80 125 155 265 1,040 100 65 55 60 50 60 75 80 125 155 265 100 65 55 60 50 60
150 265 37 36 34 41 33 40 47 52 77 95 150 515 37 36 34 41 33 40 47 52 77 95 150 515 37 36 34 41 33 40 47 52 77 95 150 515 37 36 34 41 33 40 47 52 77 95 150 37 36 34 41 33 40
33 52.5 1 6 14 18 31 31 31.5 37 32 37.5 33 43.5 1 6 14 18 31 31 31.5 37 32 37.5 33 43.5 1 6 14 18 31 31 31.5 37 32 37.5 33 43.5 1 6 14 18 31 31 31.5 37 32 37.5 33 1 6 14 18 31 31
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50
Price EURO 103.00 103.00 123.00 123.00 123.00 123.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 170.00 170.00 170.00 170.00 144.00 144.00 144.00 144.00 144.00 144.00 144.00 144.00 184.00 184.00 184.00 170.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 150.00 300.00 300.00 300.00 230.00 180.00 180.00 180.00 180.00 180.00 180.00 180.00 270.00 270.00 270.00 240.00 190.00 190.00
THOMAPLAST® I - 2015 87
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats Item 95656 95657 95658 95659 95660 95661 95662 95664 95665 95666 95667 95668 95669 95670 95672 95673 95674 95675 95676 95678 95679 95680 95681 95682 95683 95684 95686 95687 95688 95689 95690 95692 95693 95694 95695 95696 95697 95698 95699 95700 95701 95702 95703 95704 95706 95707 95708 95709 95710 95711 95712 95713 95714 95715 95716
Outside Ø mm 100 100 100 100 100 100 100 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 107.5 110 110 110 110 110 110 110 110 110 110 110 110 142 142 142 142 142 142 142 142 142 142 142 142 142 200 200 200 200 200 200 200 200 200 200 200
Mesh Ø Open size thread area µm µm %
Thick- Unit ness µm piece
60 80 100 150 200 700 1,000 5 11 20 30 41 50 60 100 150 200 700 1,000 5 11 20 30 41 50 60 100 150 200 700 1,000 5 11 20 30 41 50 60 80 100 150 200 700 1,000 5 11 20 30 41 50 60 80 100 150 200
75 80 125 155 265 485 1,040 100 65 55 60 50 60 75 125 155 265 485 1,040 100 65 55 60 50 60 75 125 155 265 485 1,040 100 65 55 60 50 60 75 80 125 155 265 485 1,040 100 65 55 60 50 60 75 80 125 155 265
47 52 77 95 150 265 515 37 36 34 41 33 40 47 77 95 150 265 515 37 36 34 41 33 40 47 77 95 150 265 515 37 36 34 41 33 40 47 52 77 95 150 265 515 37 36 34 41 33 40 47 52 77 95 150
88 THOMAPLAST® I - 2015
31.5 37 32 37.5 33 52.5 43.5 1 6 14 18 31 31 31.5 32 37.5 33 52.5 43.5 1 6 14 18 31 31 31.5 32 37.5 33 52.5 43.5 1 6 14 18 31 31 31.5 37 32 37.5 33 52.5 43.5 1 6 14 18 31 31 31.5 37 32 37.5 33
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Price
Item
EURO
190.00 190.00 190.00 190.00 190.00 190.00 190.00 260.00 260.00 260.00 208.00 200.00 200.00 200.00 200.00 200.00 200.00 200.00 200.00 300.00 300.00 300.00 215.00 200.00 200.00 200.00 195.00 200.00 200.00 200.00 200.00 275.00 275.00 275.00 235.00 225.00 215.00 215.00 215.00 215.00 215.00 215.00 215.00 225.00 600.00 600.00 600.00 450.00 325.00 315.00 325.00 315.00 315.00 315.00 315.00
Filtration
Outside Ø mm
95717 95718 95720 95721 95722 95723 95724 95725 95726 95729 95730 95731 95732
200 200 293 293 293 293 293 293 293 293 293 293 293
Mesh Ø Open size thread area µm µm %
Thick- Unit ness µm piece
700 1,000 5 11 20 30 41 50 60 150 200 700 1,000
485 1,040 100 65 55 60 50 60 75 155 265 485 1,040
265 515 37 36 34 41 33 40 47 95 150 265 515
52.5 43.5 1 6 14 18 31 31 31.5 37.5 33 52.5 43.5
25 25 25 25 25 25 25 25 25 25 25 25 25
Price EURO 325.00 325.00 975.00 975.00 975.00 675.00 450.00 450.00 450.00 375.00 375.00 375.00 375.00
THOMAPOR®-Screen Cloth made of Polyamide (antistatic) - cutting Product specification
• The screen cloth in antistatic design is particularly suited for screening of dry and electrostatically chargeable materials due to incorporated electrically conductive threads (no clogging, thus no danger of electrical discharge and sparking). • Advantages compared to metal fabrics: more application possibilities, lower weight, mechanical and elastic properties of a standard PA 6.6 synthetic fabric. • Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format (other lengths are available on request)
Technical specification
• Colour: silver (optically, under microscope alternately black and white threads are visible) • Resistivity: <1 x 104 to <1 x 106 ohm
Item 9486011 948611 948621 948631 948641 9486512 9486021 948612 948622 948632
Mesh size µm
Ø thread µm
Open area %
82 105 120 160 245 510 82 105 120 160
52 43 43 80 120 220 52 43 43 80
37 40 42 44 45 45 37 40 42 44
Thick- Dimensions Price ness µm cm EURO 92 125 135 148 230 330 92 125 135 148
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 108 x 102 136 x 102 136 x 102 158 x 102
55.00 52.00 49.00 47.00 43.00 40.00 220.00 207.00 199.00 189.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats Item 948642 9486522 1
Mesh size µm
Ø thread µm
Open area %
245 510
120 220
45 45
Thick- Dimensions Price ness µm cm EURO 230 330
Filtration
THOMAPOR®-Screen Cloth made of Polypropylene round blank
115 x 102 173.00 115 x 102 163.00
Colour: black 2 Material: PA6
THOMAPOR®-Screen Cloth made of Polypropylene Application area
• Cloth for screening and filtering purposes
General product specification
• Polypropylene monofilament features high weave quality, precision and regularity of mesh sizes. The cloth scarcely shows signs of fatigue and features good abrasion resistance. • Good resistance to solvents, acids and alkalis • Poor UV-resistance
General technical specification
• Material: PP • Density: 0.91 g/mm3 • Tensile strength: 35 - 62 daN/mm2 • Relative strength at wet conditions: 100 % • Elongation at break: 20 - 50 % • Moisture uptake: 0 % (at +20 °C and 65 % r.h.) • Melting point: +170 °C • Softening temperature: +150 °C • Temperature range: -30 to +90 °C, for a short time up to +120 °C
THOMAPOR®-Screen Cloth made of Polypropylene cutting Product specification
• Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
Item
Mesh size µm
Ø thread µm
Open area %
948201 948211 948221 948231 948241 948202 948212 948222 948232 948242
2,000 1,000 500 250 105 2,000 1,000 500 250 105
800 500 340 215 165 800 500 340 215 165
51 45 36 29 16 51 45 36 29 16
Thick- Dimensions Price ness µm cm EURO 1,310 1,020 610 430 360 1,310 1,020 610 430 360
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102
47.00 47.00 47.00 47.00 47.00 185.00 185.00 185.00 185.00 192.00
Item 95735 95736 95737 95738 95739 95741 95742 95743 95744 95746 95748 95749 95750 95751 95754 95755 95756 95757 95760 95761 95762 95763 95764 95766 95767 95768 95769 95772 95773 95774 95775 95777 95778 95779 95780 95781 95783 95784 95785 95786 95787 95788
Outside Ø mm 13 13 13 13 13 25 25 25 25 25 47 47 47 47 50 50 50 50 76 76 76 76 76 100 100 100 100 107.5 107.5 107.5 107.5 110 110 110 110 110 142 142 142 142 142 142
Mesh Ø Open size thread area µm µm %
Thick- Unit ness µm piece
75 105 250 500 1,000 75 105 250 500 2,000 105 250 500 1,000 105 250 500 1,000 105 250 500 1,000 2,000 105 250 500 1,000 105 250 500 1,000 75 105 250 500 1,000 75 105 250 500 1,000 2,000
195 360 430 500 1,020 195 360 430 500 1,310 360 430 500 1,020 360 430 500 1,020 360 430 500 1,020 1,310 360 430 500 1,020 360 430 500 1,020 195 360 430 500 1,020 195 360 430 500 1,020 1,310
85 165 215 320 500 85 165 215 320 800 165 215 320 500 165 215 320 500 165 215 320 500 800 165 215 320 500 165 215 320 500 85 165 215 320 500 85 165 215 320 500 800
21 16 29 37 45 21 16 29 37 51 16 29 37 45 16 29 37 45 16 29 37 45 51 16 29 37 45 16 29 37 45 21 16 29 37 45 21 16 29 37 45 51
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25
Price EURO 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 110.00 130.00 130.00 130.00 130.00 160.00 160.00 160.00 160.00 170.00 170.00 170.00 170.00 170.00 190.00 190.00 190.00 190.00 200.00 200.00 200.00 200.00 218.00 218.00 218.00 218.00 218.00 240.00 240.00 240.00 240.00 240.00 240.00
THOMAPLAST® I - 2015 89
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats Item 95790 95791 95792 95793 95796 95797 95798 95799
Outside Ø mm 200 200 200 200 293 293 293 293
Mesh Ø Open size thread area µm µm %
Thick- Unit ness µm piece
105 250 500 1,000 105 250 500 1,000
360 430 500 1,020 360 430 500 1,020
165 215 320 500 165 215 320 500
16 29 37 45 16 29 37 45
25 25 25 25 25 25 25 25
Price
Item
EURO
Filtration
Mesh size µm
Ø thread µm
Open area %
Thick- Dimensions Price ness µm cm EURO
948581 948502 948512 948522 948532 948542 948552 948562 948572 948582
70 1,000 850 500 300 250 150 120 105 70
80 515 275 280 215 152 105 80 80 80
21.7 45 58 42 36 39 36 36 32.2 21.7
158 1,000 505 500 385 290 200 145 155 158
305.00 305.00 305.00 305.00 433.00 433.00 433.00 433.00
THOMAPOR®-Screen Cloth made of FEP
20 x 29 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102 100 x 102
Application area
THOMAPOR®-Screen Cloth made of PVDC
Product specification
Application area
• Cloth for screening and filtering purposes • FEP (fluorinated ethylene-propylene copolymer) featuring high weaving quality, precision and regularity of mesh sizes. The mechanical loadability is excellent, symptoms of fatique not known. • Good abrasion resistance • Good resistance to solvents, acids and alkalis • Good UV-resistance • Deliverable in small individual segments (20 x 29 cm) or in a costeffective large format of 100 x 102 cm.
Technical specification
• Material: FEP • Density: 1.75 g/mm3 • Tensile strength: 40 - 50 daN/mm2 • Relative strength at wet conditions: 100 % • Elongation at break: 25 % • Moisture uptake: 0 % (at +20 °C and 65 % r.h.) • Melting point: +270 °C • Softening temperature: > +150 °C • Temperature range: -190 to +150 °C
113.00 606.00 453.00 453.00 453.00 453.00 509.00 509.00 509.00 509.00
• Cloth for process, product and laboratory filtration, settling sludge filtration, for use as air filter, for conveying belts and for making up of bags, also usable as support and carrier cloth.
Product specification
• Best abrasion resistance • No wet elongation • UV-resistant • Good resistance to light and colour stability • Flame-resistant • Best elastic properties • Good resistance over the whole pH range • Remarkable dimensional stability
Technical specification
• Material: PVDC (polyvinylidene chloride) • Max. temperature: +80 °C, for a short time up to +115 °C • Softening point: +116 to +137 °C • Moisture uptake: >0.01 % • Elongation at break: 20 - 30 % depending on count of yarn
Item
Mesh size µm
Ø thread µm
Open area %
Thick- Dimensions Price ness µm cm EURO
948501 93187 948511 948521 948531 948541 948551 948561 948571
1,000 1,000 850 500 300 250 150 120 105
515 412 275 280 215 152 105 80 80
45 55 58 42 36 39 36 36 32.2
1,000 800 505 500 385 290 200 145 155
90 THOMAPLAST® I - 2015
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29
100.00 100.00 100.00 100.00 93.00 95.00 100.00 110.00 110.00
Item
Mesh size µm
Ø thread µm
Open area %
302912 302913 302914 302915 302916 302917 302918 302919 302920
3,500 2,200 2,000 1,200 950 700 600 600 500
1,500 900 600 380 300 380 380 300 230
49 50 59 58 61 42 37 44 47
Thick- Dimensions Price ness µm cm EURO 2,760 1,656 1,000 700 550 700 780 550 425
25 x 25 25 x 25 25 x 25 25 x 25 25 x 25 25 x 25 25 x 25 25 x 25 25 x 25
60.00 65.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats Item
Mesh size µm
Ø thread µm
Open area %
302921 302922 302923 302924 302925 302926 302927 302928 302929 302930 302931 302932 302933 302934 302935 302936 302937 302938 302939 302940 302941 302942 302943 302944
450 400 3,500 2,200 2,000 1,200 950 700 600 600 500 450 400 3,500 2,200 2,000 1,200 950 700 600 600 500 450 400
200 230 1,500 900 600 380 300 380 380 300 230 200 230 1,500 900 600 380 300 380 380 300 230 200 230
48 40 49 50 59 58 61 42 37 44 47 48 40 49 50 59 58 61 42 37 44 47 48 40
Thick- Dimensions Price ness µm cm EURO 370 425 2,760 1,656 1,000 700 550 700 780 550 425 370 425 2,760 1,656 1,000 700 550 700 780 550 425 370 425
25 x 25 25 x 25 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 100 x 100 100 x 100 100 x 100 100 x 100 100 x 100 100 x 100 100 x 100 100 x 100 100 x 100 100 x 100 100 x 100
55.00 55.00 155.00 160.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 335.00 390.00 285.00 285.00 285.00 285.00 285.00 285.00 285.00 285.00 285.00
Filtration
Technical specification
• Material: PVDF (polyvinylidene fluoride) • Max. temperature: +120 °C, for a short time up to +140 °C • Melting point: +175 °C Item 302903 302904 302905 302906 302907 302908 302909 302910 302911
Mesh size µm
Ø thread µm
Open area %
800 500 250 800 500 250 800 500 250
250 250 150 250 250 150 250 250 150
58 44 39 58 44 39 58 44 39
Thick- Dimensions Price ness µm cm EURO 460 490 340 460 490 340 460 490 340
25 x 25 25 x 25 25 x 25 50 x 50 50 x 50 50 x 50 100 x 100 100 x 100 100 x 100
65.00 75.00 60.00 150.00 175.00 145.00 350.00 410.00 345.00
THOMAPOR®-Screen Cloth made of Stainless Steel SS 314 Technical specification
• Cuttings: 30 x 60 cm and 20 x 29 cm
THOMAPOR®-Screen Cloth made of PVDF Application area
• Cloth for process, product and laboratory filtration in nuclear and reactor technology and chemical engineering, in aircraft manufacturing and in space engineering, in petrochemistry, in machine building and apparatus construction.
Product specification
• Heavy duty plastic • Very good chemical resistance • Excellent resistance to hydrolysis • Good temperature resistance • Low moisture uptake • High mechanical stability • High thermostability • Very good radiation resistance • Good stability to light • Outstanding resistance to UV-radiation and weather • Very good dimensional stability • Physiologically absolutely safe
Item 948711 948721 948731 948741 948751 948761 948771 948781 948791 948801 948811 948712 948722 948732 948742 948752 948762 948772 948782 948792 948802 948812
Mesh size µm
Open area %
Dimensions cm
Price EURO
25 36 50 71 100 140 250 500 1,000 1,500 2,000 25 36 50 71 100 140 250 500 1,000 1,500 2,000
28 32 39 41 44 48 51 61 67 72 74 28 32 39 41 44 48 51 61 67 72 74
20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 20 x 29 30 x 60 30 x 60 30 x 60 30 x 60 30 x 60 30 x 60 30 x 60 30 x 60 30 x 60 30 x 60 30 x 60
156.00 105.00 87.00 80.00 75.00 72.00 69.00 64.00 64.00 85.00 77.00 315.00 233.00 165.00 145.00 130.00 126.00 103.00 105.00 105.00 118.00 110.00
THOMAPLAST® I - 2015 91
Separation Technology - Screen Cloths, Filter Cloths, Fleeces and Mats THOMAPOR®-Filter Cloth made of PE
Item
Application area
Product specification
332349 332350 332351
• For filtration of dusts out of the air • Use in wet filtration e.g. in cheese dairy (cheese cloth) • Light, outstandingly mechanical resistant quality, not fibrous • The filter cloth can be either tied or knotted
1
Filtration Thickness Max. flow Weight rate gases1 mm l/min. g/m² 0.85 0.85 0.85
160 160 160
200 200 200
Dimensions
Price
mm
EURO
250 x 250 58.00 500 x 500 98.00 1.000 x 1.000 166.00
Air (l/min./10 cm2 at 10 cmWC)
THOMAPOR®-High-Tech Charcoal Fleece made of PE - large-pored Application area
• medical gassing systems, filter and face masks, combat filter systems, clean-room filter systems
Technical specification
Item 94886 1
Thickness Max. flow rate gases1 µm l/sec. 215
440
Weight
Dimensions
Price
g/m²
cm
EURO
132
102 x 100
112.00
• Material: PE (polyethylene) • Colour: grey • Design: charcoal-loaded fleece • Pore size: 160 - 235 µm • Charcoal component: 57 %, corresponds to 114 g/m2
Item
Air (l/sec. x m2 x bar)
332352 332353 332354
THOMAPOR®-High-Tech Charcoal Fleece made of PE - fine-pored
1
Thickness Max. flow Weight rate gases1 mm l/min. g/m² 1.2 1.2 1.2
156 156 156
200 200 200
Dimensions
Price
mm
EURO
250 x 250 62.00 500 x 500 104.00 1.000 x 1.000 176.00
Air (l/min./10 cm2 at 10 cmWC)
Application area
• Filtration of electroplating solutions • Filtration in chemical process engineering
THOMAPOR®-Filter Mat made of Polyester
Technical specification
Application area
• Heating systems, air-condition, ventilation
• Material: PE (polyethylene) • Colour: black • Design: charcoal-loaded fleece • Pore size: 30 - 46 µm • Charcoal component: 50 %, corresponds to 225 g/m2
Product specification
• Synthetic and break proof fibre • Progressively composed • Thermically bonded
Item 332343 332344 332345 1
Thickness Max. flow Weight rate gases1 mm l/min. g/m² 1.3 1.3 1.3
7 7 7
450 450 450
Dimensions
Price
mm
EURO
495 x 500 72.00 500 x 990 120.00 990 x 1.000 200.00
Technical specification
• Material: PEs (polyester) • Colour: white • Design: synthetic fibre mats (PEs) • Temperature range: -15 to +100 °C • Burning behavior: self-extinguishing F1 according to DIN 53438
Air (l/min./10 cm2 at 10 cmWC)
THOMAPOR®-High-Tech Charcoal Fleece made of PE - medium-pored Application area
• Medical gassing systems, filter and face masks, combat filter systems, clean-room filter systems
Technical specification
• Material: PE (polyethylene) • Colour: grey • Design: charcoal-loaded fleece • Pore size: 89 - 109 µm • Charcoal component: 30 %, corresponds to 60 g/m2
92 THOMAPLAST® I - 2015
301150, 301139
301150, 301139
Separation Technology - Frits, Eluent Filters and Immersion Filters Item 301150 301151 301152 301153 301154 301155 301156 301157 301158 301159 301160 301161
Thickness mm
Filter class
Width mm
Unit m
Price EURO
10 10 10 20 20 20 25 25 25 16 16 16
G2 G2 G2 G3 G3 G3 G4 G4 G4 F5 F5 F5
2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000
1 3 5 1 3 5 1 3 5 1 3 5
90.00 202.00 246.00 108.00 254.00 307.00 192.00 430.00 476.00 190.00 374.00 417.00
Item 83412 83413
Filtration
Outside Ø mm
Pore size µm
Unit piece
Price EURO
6.4 6.4
0.5 2
3 3
45.00 48.00
THOMAPOR®-Filter Mat made of Glass Fibre
THOMACHROM®-Column Frit made of Titanium
Application area
Product specification
• Suitable for all kinds of air condition and ventilation systems
Product specification
• Material: borosilicate fibre • Colour: Room air side: white; air streaming side: yellow • Temperature range: -15 to +45 °C
Item 301139 301140 301141 301142 301143 301144 301145 301146 301147 301148 301149
Thickness mm
Filter class
Width mm
Unit m
Price EURO
25 25 25 25 25 50 50 50 50 50 50
G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3
500 500 1,500 1,500 1,500 500 500 500 1,500 1,500 1,500
5 10 1 5 10 1 5 10 1 5 10
105.00 167.00 105.00 261.00 412.00 64.00 136.00 223.00 151.00 381.00 601.00
Frits, Eluent Filters and Immersion Filters THOMACHROM®-Frits
• Homogeneous 1/4“ frits made of sintered purest titanium, the absolutely corrosion-proof and biocompatible metallic material of highest mechanical and chemical stability. Suitable for all organic eluents, buffer and salt solutions, also strongly chlorine-containing ones, as well as strongly acid and basic eluents. For chromatography of sensitive high-molecular and bioactive substances in metal-free apparatuses and for ion chromatography. Pore sizes 0.5 and 2 µm resp., thickness 1 mm.
Item 83414 83415
Outside Ø mm
Pore size µm
Unit piece
Price EURO
6.4 6.4
0.5 2
3 3
45.00 51.00
THOMACHROM®-Column Frit made of Titanium framed with PCTFE Ring Product specification
• Composite frits made of sintered purest titanium, framed with a sturdy ring made of PCTFE (polychlorotrifluoroethylene) for seal. The material combination titanium-K is chemically inert and absolutely biocompatible. Improved chromatography behaviour by more favourable matching of frit lumen and effective diameter of the frit body, lower dead volume and removal of resolution-decreasing diffusion and cavitation phenomena in the edge zone of the frit. Particularly suited for chromatography of sensitive, bioactive substances such as enzymes, peptides etc. in metal-free equipment. Also usable as filter cartridges for inlet valves in HPLC pumps such as Altex/Beckmann etc.
General product specification
• Frits made of plastic, titanium, Hastelloy and proven material composites, high-pressure resistant, for 1/4“ HPLC columns and other HPLC system elements, for prefiltration of eluents, particularly for use in the metal-free chromatography.
THOMACHROM®-Column Frit made of Hastelloy Product specification
• Homogeneous 1/4“ frits made of sintered chromium-nickel-molybdenum-tungsten-steel (Hastelloy C 276), the corrosion-proof material for chemical plant building. For chromatography of sensitive, particularly bioactive substances and for ion chromatography. Pore size 0.5 and 2 µm resp., thickness 1 mm.
THOMAPLAST® I - 2015 93
Separation Technology - Frits, Eluent Filters and Immersion Filters Item 83416 83417 83418
Ø frit, effective mm
Ø frit mm
Pore size µm
Thickness mm
4 .6 3.9 3.2
Unit
Price
piece
EURO
6.35 6.35 6.35
2 2 2
1.6 1.6 1.6
2 2 2
34.00 36.00 39.00
THOMACHROM®-Cylinder Frit made of Hastelloy Application area
• Immersion frit body for connection to the eluent suction line for direct fine filtration of HPLC eluents during suction into the pumping system to protect seals, pistons and column packings from early wear due to contamination. Preferably for use in ion chromatography, for strongly acid, basic and other corrosive eluents.
Filtration
THOMACHROM®-Cylinder Frit made of Stainless Steel - Standard Application area
• Immersion frit body for direct fine filtration of HPLC eluents during suction into the pumping system to protect seals, pistons and column packings from early wear due to contamination.
Product specification
• Cylindrical immersion frit body for direct fine filtration of HPLC eluents during suction into the pumping system, different pore sizes, with tubing connecting nozzle for mounting at the eluent suction tubing (internal diameter 1/8“ or 1/16“), made of proven stainless steel 1.4401 (SS 316), for use in the analytical and preparative HPLC with flow rates up to 100 ml/min.
Product specification
• Cylindrical hollow frit body made of highly corrosion-proof sintered Hastelloy C 275, the chromium-nickel-molybdenum-tungsten material for chemical plant building. Nozzle made of the same material, with PTFE fitted in the frit body. Nozzle outside diameter 1/8“.
83345, 83346 Item 83345
Item
O-Ø
Pore size
mm
µm
83339 83340 83342 83344 46653 46654 83341 83343 46655 46656
17.2 12.7 9.5 12.7 22.2 9.5 12.7 12.7 17.2 22.2
2 2 2 2 2 10 10 10 10 25
83345, 83346
Outside Ø mm
Pore size µm
Length mm
Unit piece
Price EURO
12.7
2
25.4
1
100.00
THOMACHROM®-Cylinder Frit made of Titanium Application area
• Immersion frit body for connection to the eluent suction line for direct fine filtration of HPLC eluents during suction into the pumping system to protect seals, pistons and column packings from early wear due to contamination. Preferably for use in chromatography of instable macromolecules and bioactive substances as well as for ion chromatography.
Product specification
• Cylindrical hollow frit body made of sintered 99.9 % purest titanium, a metallic material combining chemical resistance and biocompatibility. Nozzle also made of purest titanium, with PTFE seal fitted in the frit body. Nozzle outside diameter 1/8“.
Item 83346
Outside Ø mm
Pore size µm
Length mm
Unit piece
Price EURO
12.7
2
25.4
1
123.00
1
95 35 35 35 50 100 100 50 100 100
20.5 25.4 25.4 25.4 38 25.4 25.4 25.4 25.4 38
1/8“ 1/8“ 1/8“
3.2 3.2 1.6 3.2 3.2 1.6 3.2
85.00 85.00 85.00 110.00 110.00 85.00 85.00 85.00 85.00 110.00
Water (+20 °C)
THOMACHROM®-Cylinder Frit made of Stainless Steel - Universal Application area
• Cylinder frits for prefiltration of eluents and for helium gassing of solutions and solvents in the analytical and preparative HPLC.
Product specification
• Cylindrical hollow frit bodies made of high-alloy, corrosion-proof sinter high-quality steel 1.4571, pore size 5 µm, long tubing nozzle for mounting of the eluent suction tubing of HPLC pumps, nozzle outside diameter 1/16“ and 1/8“ resp. Special „narrow-neck bottle“ design with frit body diameter of only 5.8 mm for drawing of eluents out of flasks and other narrow-lumen vessels, e.g. in experiments with premixed eluents for process development and in demonstration experiments.
94 THOMAPLAST® I - 2015
Max. Length For For Price flow rate pipes tubing liquids1 O-Ø I- Ø ml/min. mm inch mm EURO
Separation Technology - Frits, Eluent Filters and Immersion Filters
Filtration
THOMAPOR®-Cylinder Frit made of PTFE Application area
• Suction filter for protection of pump systems, to protect seals, pistons and column packings from early wear due to contamination.
Product specification
Item
Outside Ø mm
Length mm
Ø nozzle mm
Unit piece
Price EURO
5.8 15 15 27
22 20 20 30
1.6 1.6 3.2 3.2
1 1 1 1
108.00 121.00 133.00 151.00
84026 84027 84028 84029
• Large surface, therefore long holding time • For use with all media due to material • Dirt-repellent/non-adhesive • Water-repellent/hydrophobic • Antiadhesive (non-wettable) • Delivered without hose and mapped ferrule
Technical specification
• Material: PTFE (polytetrafluoroethylene) • Temperature range: -200 to +250 °C • Sterilization: autoclavable (+121 °C) • Filter length: 25 mm • Connecting thread: UNF 1/4”-28 Gg
THOMAPOR®-Cylinder Frit made of PE Application area
• Metal-free immersion filter for fine filtration of HPLC eluents during suction in the high-pressure pump, for protection of the sensitive suction pressure systems from early wear by suspended matter in the eluent. Preferably for metal-free chromatography of sensitive and bioactive materials, for enzyme and peptide separation and for ion chromatography and environmental analytics.
Product specification
• Cylinder frit with large active surface made of sintered polyethylene, chemical-resistant and suitable for aqueous solutions. Free of extractables, physiologically safe and biocompatible. Pore size <20 µm, high retention capacity at low flow resistance. Screwing-in connector made of inert polyether etherketone (PEEK) for 1/16“ or 1/8“ suction lines. Complete for easy mounting without tools.
Item 302821 302822 302823 302824
Outside Ø mm
Pore size µm
For pipes outside Ø inch
Unit
Price
piece
EURO
14 14 14 14
2 2 10 10
1/16“ 1/8“ 1/16“ 1/8“
1 1 1 1
128.00 128.00 105.00 105.00
THOMAPOR®-Immersion Filter made of HDPE
Product specification
• Made of high-pressure polyethylene. Direct application or with precoat layer for fine filtration. Large filter with barbed tubing connection.
Item
O-Ø
Pore size
Max. For flow rate pipes liquids1 O-Ø ml/min. inch
mm
µm
83500 12.7 83501 12.7
20 20
500 500
83502 12.7
20
500
1
Water (+20 °C)
Design
Unit Price
piece EURO
1/16“ frit, complete 1/8“ frit, complete replacement frit
1 1
70.00 70.00
3
23.00 Item 50478 50479
Pore size
For tubing inside Ø mm
Ø filter
Length
Unit
mm
mm
piece
EURO
90 - 130 8.4 - 9 90 - 130 11.5 - 16
40 125
90 150
1 1
70.00 106.00
µm
Price
THOMAPLAST® I - 2015 95
Separation Technology - Frits, Eluent Filters and Immersion Filters THOMACHROM®-Fritted Filter made of Stainless Steel
Prefilters and Filter Holders
Product specification
• Filter units for eluent polishing filtration in the high-pressure part of HPLC systems and for use as safety filters placed after the sample inlet valve to protect the column packing from contaminations out of eluent or sample. • In-line filter system made of stainless steel with screwed 2 µm stainless steel frits, interchangeable without problems, low dead volume, high cut off. Frit diameters match optimally the connecting capillaries and through bores.
Filtration
THOMAPOR®-Disposable Filter Unit − hydrophilic, with integrated glass fibre prefilter Application area
• Prefiltration and clarification of aqueous samples and solutions with a high content of suspended matter, especially for insertion in systems of precision analytics.
Product specification
• Disposable ready-to-use filter unit made of inert polypropylene, integrated glass-fibre prefilter, filter made of polyamide, on both sides tubing nozzle connection 6 to 10 mm and luer internal cone; temperature-resistant up to +80 °C, chemically sterilizable.
Item
For pipes For pipes outside outside Ø (A) Ø (B) inch inch
83671 97640 83672 97641 836731 1
1/16“ 1/16“ 1/8“ 1/8“ 1/4“
1/32“ 1/16“ 1/16“ 1/8“ 1/4“
Ø frit
Nominal width
Unit
Price
mm
mm
piece
EURO
1.6 1.6 3.2 3.2 6.4
0.25 0.5 0.75 2 4.6
1 1 1 1 1
75.00 45.00 45.00 45.00 45.00
Item
Pore size µm
Ø filter mm
For tubing inside Ø mm
Price
piece
EURO
58583
0.45
50
6 - 10
6
72.00
Frit is fixed, not interchangeable
MULTIFIT®-High-Pressure Capillary Mixing Chamber for Media made of PEEK Product specification
THOMAPOR®-Disposable Mini Filter Unit − hydrophilic, with female luer-lock Application area
• Clarification and fine filtration of aqueous samples and solutions in smallest volumes for precision analytics such as HPLC and capillary electrophoresis in areas of clinical chemistry, laboratory diagnostics, biochemistry, environmental chemistry, pharmacology and food processing chemistry.
• Complete with fingertight fittings
Technical specification
• Dead volume: <4 µl • Counterpressure: <1 bar at 1 ml/min. • Pressure stability: 350 bar • Filter porosity: 10 µm
Product specification
• Disposable, ready-to-use filter units with minimum dead volumes for syringes made of inert polyamide (Nylon), and integrated membrane filters made of the same material, temperature-resistant up to +80 °C, chemically sterilizable.
Item 14734 1
Unit
For pipes outside Ø inch
Max. op. pressure1 bar
Internal thread
EURO
1/16“
350
UNF 10-32
220.00
at +20 °C
96 THOMAPLAST® I - 2015
Price
Separation Technology - Prefilters and Filter Holders Item
Filtration
Ø filter mm
Dead volume ml
Outlet
Unit
Pore size µm
piece
EURO
58574 58575 58576
0.2 0.45 5
3 3 3
0.007 0.007 0.007
male luer male luer male luer
10 10 10
30.00 30.00 30.00
1
Price
at +20 °C
THOMAPOR®-Disposable Filter Unit made of Cellulose Derivatives - hydrophilic, with female luer-lock Application area
• Clarification and prefiltration of aqueous samples and solutions in small volumes for precision analytics and synthetic chemistry.
Item
Ø filter mm
Dead volume ml
Outlet
Unit
Pore size µm
piece
EURO
58568 58569 58570 58571 58572 58573
0.2 0.2 0.2 0.45 0.45 0.45
13 13 30 13 13 30
0.01 0.01 0.05 0.01 0.01 0.05
mini-tip male luer male luer mini-tip male luer male luer
10 10 10 10 10 10
30.00 30.00 30.00 30.00 30.00 30.00
Product specification
• Disposable, ready-to-use colour-coded filter units with minimum dead volumes for syringes and linear pumps with female luer-lock connection, made of inert polycarbonate (PC), and integrated membrane filters made of cellulose derivatives, filter area 5.7 cm2, temperatureresistant up to +80 °C, chemically sterilizable.
1
Price
at +20 °C
THOMAPOR®-Disposable Filter Unit - hydrophobic, with female luer-lock Application area
• Filtration of small volumes of organic samples and solutions as well as of gases for precision analytics and preparative chemistry.
Product specification
Item
filter1 Pore Ø Dead Outlet Colour Unit Price size filter volume µm mm ml piece EURO
58577 CA 58579 CA 58580 CA 58581 CA 58582 CN 1
0.2 0.45 0.8 1.2 5
30 30 30 30 30
0.05 0.05 0.05 0.05 0.05
male luer male luer male luer male luer male luer
red white green orange black
10 10 10 10 10
• Disposable, ready-to-use filter units with minimum dead volumes for syringes and linear pumps with female luer-lock connection, colour-coded, made of inert polypropylene (PP), and integrated PTFE membrane filters, chemically sterilizable.
30.00 30.00 30.00 30.00 30.00
CA = cellulose acetat, CN = celllulose nitrate
THOMAPOR®-Disposable Filter Unit made of RC hydrophilic, with female luer-lock Application area
• Clarification and fine filtration of aqueous samples and solutions in small volumes used in precision analytics and in research areas of clinical chemistry, laboratory diagnostics, biochemistry, environmental chemistry, pharmacology and food processing chemistry.
Product specification
• Disposable, ready-to-use filter units with minimum dead volumes for syringes and linear pumps with female luer-lock, made of inert polypropylene (PP), and integrated membrane filters made of regenerated cellulose (RC), outlet male luer or pointed cone (mini-tip) for filtration in narrow-neck vessels; temperature-resistant up to +80 °C, chemically sterilizable.
Item
Pore size µm
58585 0.2 58586 0.45 58587 1 58588 5 1
Ø filter mm
Dead volume ml
30 30 30 30
0.05 0.05 0.05 0.05
Outlet
Colour
male luer white male luer green male luer yellow male luer grey
Unit
Price
piece EURO 10 10 10 10
51.00 51.00 51.00 51.00
at +20 °C
THOMAPLAST® I - 2015 97
Separation Technology - Prefilters and Filter Holders
Filtration
THOMAPOR®-Glass Fibre Filter
Technical specification
Product specification
• Glass fibre filter pipe permanently welded in a sealed plastic filter holder • Use for liquid or gas filtration such as sterilization of compressed air and other gases. • Retention capacity: Air or gas filtration: 99.99 % (0.6 µm particles); liquid filtration: 98 % (0.3 µm particles) • Choice of porosity: For air and gas filtration: 25 or 8 µm Sterilization of air gas mixture: 0.3 or 0.9 µm Complete removal of oil and water: 2.0 µm
• Material: PTFE (polytetrafluoroethylene) • Temperature range: -200 to +250 °C • Sterilization: autoclavable (+121 °C) • Max. operating pressure: 20 bar • Connections: Luer-Lock adapter (on both sides) Item 302867 302868
Ø filter mm
Filter area cm²
Outside Ø housing mm
Unit
Price
piece
EURO
13 25
0.78 3.8
21 34
1 1
152.00 218.00
Technical specification
• Material: Filter holder: clear nylon Filter pipe: borosilicate glass with epoxy resin binder • Max. operating pressure: 8.62 bar (at +43.3 °C) • Max. temperature: +110 °C (at 0 bar)
THOMAPOR®-In-Line Filter made of PTFE Application area
• Pressure prefilter for direct fine filtration before HPLC columns.
Product specification
• No dead volume • Long operating time due to large filtering surface • Due to material usable with all media • For filter membrane Ø 13 mm and a thickness of 0.1 to 3 mm • The membrane is interchangeable without using tools.
Technical specification
Item
µm
Retention capacity1 %
50402 50403 50404 50405
8 2 0.9 0.3
99.5 99.99 100 100
1
Pore size
For tubing inside Ø mm
Unit
Price
piece
EURO
6.4 6.4 6.4 6.4
5 5 5 5
195.00 195.00 195.00 195.00
• Material: PTFE (polytetrafluoroethylene) • Temperature range: -200 to +250 °C • Sterilization: autoclavable (+121 °C) • Max. operating pressure: 20 bar • Filter area: 132 mm2 • Connecting thread: UNF 1/4”-28 Gg
retention capacity at 0.6 µm particles
THOMAPOR®-Prefilter made of PTFE with Luer-Lock for Syringes Product specification
• The prefilter is to be easily extended to a multistep filter system (prefilter, main filter) by alignment of further filter units due to the Luer-Lock connection of the filters. • Filter membrane easily exchangeable • Very low dead volume • Easy cleaning due to extremely smooth, antiadhesive surface • Metal-free
98 THOMAPLAST® I - 2015
Item 302825 302826
Ø filter mm
For pipes outside Ø inch
Length
Unit
mm
piece
EURO
13 13
1/16“ 1/8“
44 44
1 1
150.00 150.00
THOMAPOR®-High-Chem Membrane Filter made of PTFE
Price
Separation Technology - Prefilters and Filter Holders
Filtration
Technical specification
Item
• Material: PTFE (polytetrafluoroethylene), microporous • Temperature range: -200 to +250 °C • Sterilization: autoclavable (+121 °C) • Filter area: 132 mm2
312904 312905 312910 312911 312912 312913
Item 302827 302828 302829 302830 302831
Ø filter mm
Pore size µm
Thickness mm
Unit piece
Price EURO
13 13 13 13 13
0.05 0.2 0.45 5 10
0.2 0.2 0.2 0.2 1
5 5 5 5 10
155.00 155.00 155.00 155.00 144.00
Pore size Material Material housing filter µm 50 100 5 25 50 100
PVDF PVDF PFA PFA PFA PFA
PTFE PTFE PTFE PTFE PTFE PTFE
NW
Unit
Price
mm
piece
EURO
4/6 4/6 4/6 4/6 4/6 4/6
1 1 1 1 1 1
48.00 48.00 80.00 80.00 80.00 80.00
RCT®-Accessories: Replacement Filter Plates made of PTFE
THOMAPOR -In-Line Filter Module made of PP/PVDF/PFA ®
Application area
• Gas processing in analytical engineering • Removal of solid matters from suspensions and aerosols in analytical chemistry
Product specification
• Low weight, small and compact filter module for the uncomplicated mounting in processing plants with tubing and piping • Design ”Standard”: filter body made of polypropylene (PP) with good chemical resistance • Design ”High-Stable”: filter body made of polyvinylidene fluoride (PVDF) with very good chemical stability, as well as great hardness and excellent dimensional stability • Design ”High-Chem”: filter body made of perfluoralkoxy (PFA) with excellent chemical resistance
Item
Pore size
Ø filter
µm
312906 312907 312908 312909
5 25 50 100
Technical specification
• Material filter body: PP (polypropylene), PVDF (polyvinylidene fluoride) oder PFA (perfluoralkoxy) • Material cartridge: PTFE (polytetraflurooethylene) • Flow value Kv: 0.12 m3/h = 120 l/h (water +5 to +30 °C, p = 1 bar) • Pressure stage: PN 6 • Connection: for tubings inner diameter 4 mm, outer diameter 6 mm (DN 4/6)
Material
Unit
Price
mm
Thickness mm
piece
EURO
11.2 11.2 11.2 11.2
1 1 1 1
PTFE PTFE PTFE PTFE
1 1 1 1
8.00 8.00 8.00 8.00
THOMAPOR®-Filter Holder made of PC Application area
• For ultrapurification and sterile filtration of small volumes
Product specification
• Particularly economic in price
Technical specification
• Max. operating pressure: 3.5 bar • Max. temperature: +140 °C • Type: 420100: inlet male luer, outlet female luer-lock 420200: inlet female luer-lock, outlet male luer 420400: inlet female luer-lock, outlet NPT 1/4“-external thread, 1/4“ ID tubing olive
Item 312894 312895 312896 312897 312902 312903
Pore size Material Material housing filter µm 5 25 50 100 5 25
PP PP PP PP PVDF PVDF
PTFE PTFE PTFE PTFE PTFE PTFE
NW
Unit
Price
mm
piece
EURO
4/6 4/6 4/6 4/6 4/6 4/6
2 2 2 2 1 1
46.00 46.00 46.00 46.00 48.00 48.00
420100, 420200, 420400
420400
THOMAPLAST® I - 2015 99
Separation Technology - Prefilters and Filter Holders Item 420100 420200 420400
Ø filter mm
Filter area cm²
External thread
13 25 47
0.8 2.4 11.3
NPT 1/4“
Filtration
For tubing Price inside Ø mm EURO 6.4
19.00 31.00 87.00
THOMAPOR®-Filter Holder made of POM with luers Application area
• Ideally suited for separation of particles out of fluids, volumes amounting to 10 ml • For filtration of biological media (eye drops, samples for HPLC, GC, also suited for filtration of lubricants) • As end filter for gas filtration
Technical specification
• Material: Housing: POM (acetal resin) Support sieve: stainless steel 1.4401 (SS 316) Tubing olive: nylon (polyamide) O-ring: FPM • Filter diameter: 25 mm • Prefilter diameter: 20 mm • Effective filtering surface: 3.7 cm2 (22 mm diameter) • Overall length: 20 mm • Filter holder diameter: 35 mm • Connection: In- and outlet adapter with NPT 1/8“ on 6.4 mm ID tubing olive • Max. temperature: in air +85 °C, for a short time up to +121 °C, in water +65 °C • Max. operating pressure: in air/gas 1.4 bar; in water 2.8 bar • Sterilization: autoclavable (+121 °C)
Product specification
• Fits all standard syringes with luer connection • Usable also with 20 mm prefilter allowing higher throughput by it
Technical specification
• Connection: Inlet: female luer-lock Outlet: male luer • Max. operating pressure: 2.8 bar • Sterilization: autoclavable (+121 °C) • Prefilter diameter: 20 mm (only item 15550) Item 15549 15550
Material housing
Material inserts
Material gasket
Max. temp.
POM POM
POM stainless steel
PTFE FPM
121 65
°C
Item 15551
Ø filter mm
For tubing inside Ø mm
Internal thread
Unit
Price
piece
EURO
25
6.4
NPT 1/8“
2
144.00
THOMAPOR®-Filter Holder made of POM - Open Application area
• For microbiological monitoring and for particle analysis • Aerosol filter holder serve for sampling in clean rooms • For collection of breath air samples
Item 15549 15550
Ø filter mm
Filter area cm²
13 25
0.8 3.7
Dimensions Unit ØxH mm piece 16 x 35 35 x 27
1 1
Price EURO 69.00 87.00
THOMAPOR®-Filter Holder made of POM - In-Line Application area
• For in-line purification of air and gases and for fluid filtration
Product specification
• For direct integration in the line system • Conical inlet gives rise to even sample distribution on the surface • Also usable with 20 mm prefilter allowing higher throughput by it
100 THOMAPLAST® I - 2015
Technical specification
• Material: Housing: POM (acetal resin) Support sieve: stainless steel 1.4401 (SS 316) Tubing olive: nylon (polyamide) O-ring: FPM • Filter diameter: 25 mm • Effective filtering surface: 3.7 cm2 • Overall length: 20 mm • Filter holder diameter: 35 mm • Weight: 20 g
Separation Technology - Prefilters and Filter Holders
Filtration
• Connection: Inlet: open, Outlet: adapter with NPT 1/8“ on 6.4 mm ID tubing olive • Max. temperature: +121 °C
Item
Ø filter mm
Unit piece
Price EURO
25
2
144.00
15552
THOMAPOR®-Filter Holder made of PP - In-Line Application area
Item
• For in-line purification of air and gases and for fluid filtration
Technical specification
15555
• Material: Housing and support sieve: PP (polypropylene) O-ring: silicone • Max. temperature: +128 °C (+80 °C for fluids) • Max. operating pressure: 5 bar • Sterilization: autoclavable (+121 °C) • Type: 15553: inlet female luer-lock, outlet male luer 15554: inlet female luer-lock, outlet NPT 1/4“-external thread, 1/4“ ID tubing olive
Ø filter mm
Outlet
Unit piece
Price EURO
47
female luer-lock
1
180.00
THOMAPOR®-Filter Holder made of PSU Application area
• For clarification, purification or sterile filtration of smallest fluid quantities with a syringe, allowing filtration in both directions.
Technical specification
• Material: PSU (polysulfone) • Filter support: flexible sieve perforation in the bottom part • Seal: silicone O-ring • Max. operating pressure: 7 bar • Max. temperature: +180 °C • Sterilization: autoclavable (+134 °C and 2 bar) • For adaption to: 70775 - 70778
Item 15553 15554
Ø filter mm
Ø prefilter mm
Filter area cm²
25 47
21 42.5
3.5 13.5
Dimesions Unit ØxH mm piece 32 x 32 67 x 70
1 1
Price EURO 50.00 120.00
70757
THOMAPOR®-Filter Holder made of PP - Open
Item
Application area
Technical specification
70757 70758
• Ideal for air sampling • Material: Housing: polypropylene Support sieve: polypropylene O-rings: PTFE • Filter diameter: 47 mm • Prefilter diameter: no data • Effective filtering surface: 13.5 cm2 • Overall length: 51 mm • Filter holder diameter: 63 mm • Weight: 100 g • Connection: Inlet: open Outlet: female luer-lock on 6.4 mm ID tubing olive • Max. temperature: +128 °C (+80 °C for fluids) • Vacuum: 1 bar • Sterilization: autoclavable (+121 °C)
70758 Ø filter mm 25 50
Inlet
Outlet For tubing Unit Price inside Ø mm piece EURO
female luer-lock male luer female luer-lock
12
5 1
92.00 67.00
THOMAPOR®-Filter Holder made of PFA
THOMAPLAST® I - 2015 101
Separation Technology - Prefilters and Filter Holders
Filtration Item
Type
Ø filter
mm
72508 72509 72510 72511 72512 72513 72514 72515 72535 72536 72516 72517 72518 72519 72520 72521 72522 72523 72524 72525 72526 72527 72528 72529 72530 72531 72532 72533 72534
2 9 3 10 4 11 5 12 6 7 1 2 3 4 5 6 7 1 8 2 9 3 10 4 11 5 12 6 7
50 50 50 50 50 50 50 50 50 50 47 47 47 47 47 47 47 50 50 50 50 50 50 50 50 50 50 50 50
Application area
• Filter unit for individual problem solutions and for fixed mounting in complete systems.
Product specification
• Resistant to strongest organic and inorganic compounds. • The highest permissive loadable temperature is +288 °C with approx. 2000 operating hours; with more than 2000 operating hours the loadable temperature is decreased to +260 °C. • PFA is non-toxic and is safely to be used in the food processing industry. It is as unsuited as glass for propagation and growth of microorganisms. • Available as four basic types with diameters 47; 50; 147 and 150 mm with different connecting combinations each. The respective size (diameter) is colour-coded. In filter holders with membrane diameters of 147 and 150 mm resp. the coloured outer edge of the top is 25 % glass fibre reinforced providing higher material stability. • Specification of connecting combinations: 1 inlet/outlet tubing connection 3/8“ outer diameter (OD) 2 inlet with tubing connection 3/8“ OD; outlet with clamp fitting for tubing 1/4“ OD 3 inlet with tubing connection 3/8“ OD, outlet with clamp fitting for tubing 3/8“ OD 4 inlet with clamp fitting for tubing 1/4“ OD; outlet with tubing connection 3/8“ OD 5 inlet with clamp fitting for tubing 3/8“ OD; outlet with tubing connection 3/8“ OD 6 inlet with clamp fitting for tubing 1/4“ OD; outlet with clamp fitting for tubing 1/4“ OD 7 inlet with clamp fitting for tubing 3/8“ OD; outlet with clamp fitting for tubing 3/8“ OD 8 inlet/outlet tubing connection 1/2“ OD 9 inlet with tubing connection 1/2“ OD; outlet with clamp fitting for tubing 1/4“ OD 10 inlet with tubing connection 1/2“ OD; outlet with clamp fitting for tubing 3/8“ OD 11 inlet with clamp fitting for tubing 1/4“ OD; outlet with tubing connection 1/2“ OD 12 inlet with clamp fitting for tubing 3/8“ OD; outlet with tubing connection 1/2“ OD Item
Type
Ø filter
mm
72499 72500 72501 72502 72503 72504 72505 72506 72507
1 2 3 4 5 6 7 1 8
47 47 47 47 47 47 47 50 50
Max. op. Colour pressure1 bar
102 THOMAPLAST® I - 2015
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
orange orange orange orange orange orange orange green green
Unit
Price
piece
EURO
1 1 1 1 1 1 1 1 1
169.00 179.00 179.00 179.00 185.00 190.00 195.00 179.00 179.00
1
Max. op. Colour pressure1 bar 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
Unit
Price
piece
EURO
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
179.00 179.00 179.00 185.00 185.00 185.00 190.00 195.00 195.00 200.00 174.00 179.00 185.00 179.00 179.00 190.00 195.00 179.00 179.00 185.00 190.00 190.00 195.00 185.00 185.00 185.00 195.00 200.00 205.00
green green green green green green green green green green black black black black black black black brown brown brown brown brown brown brown brown brown brown brown brown
at +20 °C
THOMAPOR®-Filter Holder made of Aluminium In-line Application area
• For in-line fluid filtration and for air and gas purification.
Technical specification
• Material: Housing: anodically oxidized aluminium Support sieve: high-quality steel 1.4401 (SS 316), electropolished Seal: PTFE O-ring: FPM Tubing olive adapter: polyethylene • Filter diameter: 47 mm • Prefilter diameter: 37 mm • Effective filtering surface: 9.6 cm2 • Overall length: 57 mm • Filter holder diameter: 59 mm • Connection: In- and outlet adapter with NPT 1/8“ on 6.4 mm ID tubing olive • Max. temperature: limited to +121 °C by adapter • Max. operating pressure: 13.8 bar • Sterilization: autoclavable (+121 °C)
Separation Technology - Prefilters and Filter Holders
Filtration
Product specification
Item
Ø filter mm
For tubing inside Ø mm
Unit piece
47
6.4
1
15559
Price EURO
• The insert is put into a commonly used centrifuge tube and filled with the sample. After the centrifugal action the filtrate is in the tube and the residue on the filter membrane. • PET capillary pore membrane with defined pore sizes and minimum dead volume • Defined retention volumes in the membrane filter, thus no drying out of the sample • High safety during operation (no leakage due to welding of the membrane) • High chemical resistance • Supplied non-sterile, not autoclavable but sterilizable chemically • Regulations: USP Class VI, EN ISO 9001
1,368.00
THOMAPOR®-Filter Holder made of Stainless Steel Application area
• For clarification, purification or sterile filtration of smaller fluid volumes with a pressure control syringe allowing filtration in both directions. • For adaption to THOMAPOR®-pressure control syringes 70770 to 70773.
Technical specification
• Material: stainless steel 1.4305 • Design: with sieve plate, electropolished, material no. 1.4401 • Connection: inlet: female luer-lock, outlet: male luer • Max. operating pressure: 7 bar • Max. temperature: +200 °C • Sterilization: autoclavable (+121 °C); hot air (+160 °C)
Item 58865 58866 58871 58872 58878
1
Pore size µm
Max. volume ml
Tube size1 ml
Unit piece
Price EURO
0.2 0.45 0.2 0.45 0.45
0.5 0.5 5 5 20
1.5 - 2.2 1.5 - 2.2 15 15 50
25 25 25 25 25
98.00 98.00 168.00 168.00 216.00
matches centrifuge tubes of the size indicated
THOMAPOR®-Centrifugal Filter for Ultrafiltration Application area
Item 70755
Ø filter mm
Filter area cm²
Max. flow rate liquids1 ml/min.
Dimensions ØxH mm
Price EURO
25
3
150
30 x 26
376.00
• Protein removal for HPLC analysis • Bacteria and cell harvesting • Concentration of oligos and nucleic acids • Concentration of cell lysates and tissue homogenates • Protein isolation out of cell-containing fluids (only membranes with pore size 0.2 µm) • Particle isolation out of solvents • Antibody and virus concentration • Protein, DNA and RNA isolation out of geles
1
Medium: water, membrane: 0.45 µm
Filter Modules THOMAPOR®-Centrifugal Filter for Microfiltration Application area
• Protein removal for HPLC analysis • Bacteria and cell harvesting • Concentration of oligos and nucleic acids • Concentration of cell lysates and tissue homogenates • Protein isolation out of cell-containing fluids (only membranes with pore size 0.2 µm) • Particle isolation out of solvents • Antibody and virus concentration • Protein, DNA and RNA isolation out of geles
Product specification
• Two-part system consisting of centrifuge tube (PP) and matching Omega® membrane (modified PET) • High safety during operation
THOMAPLAST® I - 2015 103
Separation Technology - Filter Modules
Filtration
Technical specification
• Available in three sizes: nano: Filtration volume of 50 to 500 µl micro: Filtration volume up to 3.5 ml macro: Filtration volume up to 15 ml • Supplied non-sterile, but sterilizable chemically
• Material: Housing: PP (polypropylene) Membrane: PP (polypropylene) • Filter area: 0.8 or 3.9 cm2 • Retention volume: <8 µl with filter area 0.8 cm2; <30 µl with filter area 3.9 cm2 • Max. operating pressure: 5 bar • Max. temperature: +50 °C
Technical specification
• Dimensions: nano: 1.4 x 4.5 cm (OD x L), micro: 1.7 x 9.3 cm (OD x L), macro: 2.9 x 10.9 cm (OD x L) • Concentrated volume: nano: 15 µl micro: 30 - 50 µl (depending on rotor) macro: 0.5 - 1.5 ml (depending on rotor) • Retention volume: nano: <5 µl, micro: 5 µl, macro: 0.03 ml • Max. centrifugal force: nano: 14,000 x g, micro: 7500 x g macro: 5000 x g • Max. temperature: +40 °C Item 58867 58868 58869 58870 58873 58874 58875 58876 58879 58880 58881 58882
Type
Colour
Cut off
kDalton
nano grey nano blue nano red nano transparent micro grey micro blue micro red micro transparent macro grey macro blue macro red macro transparent
3 10 30 100 3 10 30 100 3 10 30 100
Effective Unit filter area cm² piece 0.28 0.28 0.28 0.28 0.46 0.46 0.46 0.46 10 10 10 10
12 12 12 12 12 12 12 12 6 6 6 6
Item
Price
Pore size µm
Filter area cm²
Unit piece
Price EURO
1 1 2 2
0.2 0.45 0.2 0.45
0.8 0.8 3.9 3.9
25 25 25 25
125.00 125.00 175.00 175.00
EURO 98.00 98.00 98.00 98.00 168.00 168.00 168.00 168.00 216.00 216.00 216.00 216.00
THOMAPOR®-Microanalytical Syringe Filter made of PP Application area
• Clarification of aqueous and non-aqueous solutions in milliliter volumes for sample preparation in the area of analytical chemistry.
Product specification
15022 15023 15024 15025
Type
• Metal-free syringe filters, small diameter and integrated outlet tip for rapid filtration in narrow-neck vessels; hydrophobic metal filters, compatible with almost all HPLC solvents, pore sizes 0.2 and 0.45 µm resp.; lowest dead volume, Luer syringe fitting; two sizes for volumes <5 ml (Type 1) and >5 ml (Type 2). • THOMAPOR®-Microanalytical syringe filters made of polypropylene are usable as pressure or suction filter.
Filter Housings and Filter Elements THOMAPOR®-High-Tech Media Filter Housings and Filter Candles Application area
• Laboratory and analytical technology, microelectronics, refrigerating technology plants, fuel conveyer systems, chemical process engineering, pneumatic and hydraulic systems, doctor‘s and dentist‘s offices, photographic laboratories • For filtration, clarification and particle retention in chemical process solutions, etching baths, mineral oils, refrigerating media, lacquers and dyes, pneumatic pressure gases and air, hydraulic fluids, industrial water, photochemical solutions.
General product specification
• Chemical-resistant, mechanically stable, pressure- and temperatureloadable filter systems for fixed mounting in conveying lines for liquid and gaseous media, consisting of a two-part media-tightly screwable full-plastic filter housing made of polyamide or polyamide/trogamide combination. Available in two field-proven sizes for delivery capacities up to 1,500 l/h, optionally with handy drain screw on the housing bottom. Fine-filter candles made of polyethylene or straining filter candles made of nylon with graduated pore sizes between 5 and 350 µm are to be selected according to the intended application.
THOMAPOR®-High-Tech Media Filter Housing low flow rate Product specification
• Filter housing for small flow rates
Technical specification
• Max. operating pressure: 10 bar at +30 °C; 6 bar at +85 °C • Connections: on both sides 1/4“ NPT internal thread • Height: 85 mm without drain screw; 105 mm with drain screw • Weight: 50 g • Max. temperature: +70 °C with PP design; +50 °C with trogamide design • Seal: Buna-N • Colour: blue (polypropylene); transparent (trogamide)
104 THOMAPLAST® I - 2015
Separation Technology - Filter Housings and Filter Elements
45730 Item 45729 45730 45731 1
Filtration
45730 Max. flow rate liquids1 l/h 380 380 380
Design
Internal Material Material Price thread top part bottom part EURO
without drain NPT 1/4“ without drain NPT 1/4“ with drain NPT 1/4“
PP PP PP
PP 42.00 Trogamid 42.00 Trogamid 58.00
referring to water (+20 °C) and Δp = 0.2 bar
Item
µm
Max. flow rate liquids1 l/h
45738 45739 45740
5 10 25
60 100 160
1
Pore size
Unit
Price
piece
EURO
1 1 1
37.00 37.00 37.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-High-Tech Micropore Filter Candle made of Glass Fibre
THOMAPOR®-High-Tech Straining Filter Candle made of Nylon - low flow rate
Product specification
Product specification
• Heavy-duty filter candles made of nylon with PP retaining core, regenerable by backwashing or in the ultrasound bath, for THOMAPOR®-Hightech filter housing, items 45729 to 45731, with defined pore sizes.
• Heavy-duty micropore filter candles made of glass fibre with PP retaining core for THOMAPOR®-High-tech filter housing, items 45729 to 45731, with defined pore sizes.
Item Item
µm
Max. flow rate liquids1 l/h
45732 45733 45734 45735 45736 45737
40 60 80 140 200 350
180 200 230 280 300 380
1
Pore size
Unit
Price
piece
EURO
3 3 3 3 3 3
33.00 33.00 33.00 33.00 33.00 33.00
referring to water (+20 °C) and Δp = 0.2 bar
µm
Max. flow rate liquids1 l/h
45768 45769 45770
0.3 0.9 2
10 22 35
1
Pore size
Unit
Price
piece
EURO
1 1 1
40.00 40.00 40.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-High-Tech-Media Filter Housing high flow rate Product specification
• Filter housing for higher flow rates
THOMAPOR®-High-Tech Fine Filter Candle made of PE - low flow rate Product specification
• Heavy-duty filter candles made of chemical-resistant polyethylene with retaining core for THOMAPOR®-High-tech filter housing, items 45729 to 45731.
Technical specification
• Max. operating pressure: 10 bar at +30 °C; 6 bar at +50 °C • Connections: optionally on both sides 3/8“ or 1/2“ NPT internal thread • Height: 165 mm without drain screw; 175 mm with drain screw • Weight: 250 g • Max. temperature: +70 °C with PP; +50 °C with SAN • Colour: blue (polypropylene); transparent (SAN) • Seal: Buna-N
THOMAPLAST® I - 2015 105
Separation Technology - Filter Housings and Filter Elements
Item 45741 45742 45743 45744 1
Max. flow rate liquids1 l/h
Design
800 800 800 800
without drain with drain without drain with drain
Internal Material Material Price thread top part bottom part EURO
NPT 3/8“ NPT 3/8“ NPT 1/2“ NPT 1/2“
PP PP PP PP
SAN SAN SAN SAN
94.00 102.00 94.00 102.00
referring to water (+20 °C) and Δp = 0.2 bar
Filtration
Item
µm
Max. flow rate liquids1 l/h
45751 45752 45753
5 10 25
140 210 370
1
Pore size
Unit
Price
piece
EURO
1 1 1
31.00 31.00 31.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-Filter Housing made of PP Technical specification
THOMAPOR®-High-Tech-Straining Filter Candle made of Nylon - high flow rate Product specification
• Heavy-duty filter candles made of nylon with PP retaining core, regenerable by backwashing or in the ultrasound bath, for THOMAPOR®-Hightech filter housing, items 45741 to 45744, with defined pore sizes.
• Material: PP (polypropylene) • Seal: Buna-N • Colour: blue • Max. operating pressure: 10 bar at +20 °C • Max. temperature: +55 °C
Item Item
µm
Max. flow rate liquids1 l/h
45745 45746 45747 45748 45749 45750
40 60 80 140 220 350
420 460 520 600 700 800
1
Pore size
Unit
Price
piece
EURO
1 1 1 1 1 1
26.00 26.00 26.00 26.00 26.00 26.00
referring to water (+20 °C) and Δp = 0.2 bar
THOMAPOR®-High-Tech-Fine Filter Candle made of PE - high flow rate Product specification
• Heavy-duty filter candles made of acid-resistant polyethylene with retaining core for THOMAPOR®-High-tech filter housing, items 45741 to 45744.
106 THOMAPLAST® I - 2015
mm
Max. flow rate liquids1 l/h
94482 94445 52851 52852
125 254 254 508
500 1,000 1,500 3,000
1
Length
Internal thread
Dimensions ØxH
mm
EURO
NPT 3/8“ NPT 3/8“ NPT 3/4“ NPT 3/4“
114 x 171 114 x 290 130 x 311 130 x 568
110.00 151.00 167.00 246.00
Water (+20 °C), with filter element with 10 µm fineness
THOMAPOR®-Filter Housing made of SAN Technical specification
• Material: SAN (styrene-acrylonitrile copolymer) • Seal: Buna-N • Colour: transparent • Max. operating pressure: 10 bar at +20 °C • Max. temperature: +55 °C
Price
Separation Technology - Filter Housings and Filter Elements
Filtration Item
mm
53858 53859 53860 53861 53862 53863
250 250 250 250 250 250
1
Item
mm
Max. flow rate liquids1 l/h
94479 52863
254 254
1,000 1,500
1
Length
Internal thread
Dimensions ØxH
Price
mm
EURO
NPT 3/8“ NPT 3/4“
114 x 290 132 x 320
172.00 187.00
Water (+20 °C), with filter element with 10 µm fineness
THOMAPOR®-Filter Element with Non-Woven Fabric for technical use Application area
• Filtration of dyes, lacquers, solvents, latex, fuel, lubricating oil, heating oil, diethanolamine, naphtha, petroleum, adhesive, water, perchloroethylene, trichloroethylene, gases, cutting and cooling emulsions, resins, roll emulsions.
Product specification
• Very high throughput and graduated deep-bed filtration • Excellent dirt uptake capacity and high pressure stability • Max. temperature: up to +120 °C, for a short time up to +140 °C • The performance is indicated at a pressure difference of 0.15 bar and viscosities of 1 °E, 3.7 °E and 9.5 °E. • Manufacturing process: the filter layers of the filter elements are very stable bonded with epoxy resin, thus guaranteeing the outstanding filtration properties. • The filter elements fit following housings: Item 94482: filter length 125 mm Items 94445, 52851, 52853, 94479, 52863: filter length 250 mm
Length
Filter Max. DR fineness at 1 °E1 µm l/h 1 5 10 25 50 100
510 1,350 1,600 1,800 2,000 2,200
Max. DR at 9.5 °E1 l/h
Unit
Price
piece
EURO
50 130 230 270 480 600
1 1 1 1 1 1
23.00 23.00 23.00 23.00 23.00 23.00
DR = delivery rate
THOMAPOR®-Filter Element with Non-Woven Fabric for pharmaceutical use Application area
• Pharmaceutical industry • Food processing and beverage industry • Chemical industry and microelectronics
Product specification
• Very high throughput and graduated deep-bed filtration • Excellent dirt uptake capacity and high pressure stability • Max. temperature: up to +120 °C, for a short time up to +140 °C • The performance is indicated at a pressure difference of 0.15 bar and viscosities of 1 °E, 3.7 °E and 9.5 °E. • Manufacturing process: the filter layers of the filter elements are bonded with epoxy resin and therefore usable without limitations in pharmaceutical, food processing and beverage industries. • The filter elements fit housings (items 94445, 52851, 52853, 94479, 52863)
Item
Item
Length
mm
12107 12108 12109 12110 12111 12112
125 125 125 125 125 125
Filter Max. DR fineness at 1 °E1 µm l/h 1 5 10 25 50 100
255 675 800 900 1,000 1,000
Max. DR at 9.5 °E1 l/h
Unit
Price
piece
EURO
25 65 115 135 240 300
1 1 1 1 1 1
17.00 17.00 17.00 17.00 17.00 17.00
Length
mm
53851 53852 53853 53854 53855 53856
250 250 250 250 250 250
1
Filter Max. DR fineness at 1 °E1 µm l/h 1 5 10 25 50 100
510 1,350 1,600 1,800 2,000 2,200
Max. DR at 9.5 °E1 l/h
Unit
Price
piece
EURO
50 130 230 270 480 600
1 1 1 1 1 1
43.00 43.00 43.00 43.00 43.00 43.00
DR = delivery rate
THOMAPOR®-Yarn Wound Filter Element Application area
• Filtration in chemical and pharmaceutical industries, cosmetics industry, petroleum industry, food processing industry, paints and coatings industry, electroplating technology, water purification, nuclear power plant construction, as well as filtration of photographic fluids.
THOMAPLAST® I - 2015 107
Separation Technology - Filter Housings and Filter Elements Product specification
• Excellent dirt uptake due to strongly structured, helically wound filter yarn • Large yarn assortment allows use with many media • High flow rate throughput combines great economic efficiency • Selected quality yarns are wound on a retaining core by a special winding mode. The structure of the winding is carried out in such a way that the spiral tapers off inwards. By this special winding mode the yarn construction guarantees regularity of the filter structure and high dirt uptake capacity. • Depending on the application area the filters are to be manufactured with yarns made of cotton, polypropylene or viscose and retaining cores made of polypropylene and stainless steel. • Application examples based on material polypropylene (PP): For filtration of industrial water, drinking water, mineral water, condensates, deionized water, aqueous solutions (pH 3-9), electroplating baths (pH 3-9), electroplating baths (pH <3), fluoroborate baths, cyanide baths (alkaline), pyrophosphate baths, acids and alkalis (pH 0-14), hydrochloric acid, sulfuric acid, phosphoric acid, hydrofluoric acid, nitric acid, pickling and phosphatizing baths, radioactive solutions, photochemical baths, lyes, hydraulic oils, heating and diesel oils, petrols, lubricating oils, alcohols, glycerols, chlorine, hydrogen chloride, hydrogen fluoride, and other aggressive gases. • Application examples based on material cotton: For filtration of industrial water, drinking water, mineral water, condensates, deionized water, aqueous solutions (pH 3-9), electroplating baths (pH 3-9), tin baths (alkaline), pyrophosphate baths, radioactive solutions, photochemical baths, solvents, degreasing baths, freons, hydraulic fluids, heating and diesel oils, petrols, lubricating oils, edible oils, edible fats, alcohols, glycerols, aggressive gases. The filter elements fit following housings: Item 94482: filter length 125 mm Items 94445, 52851, 52853, 94479, 52863: filter length 248 and 254 mm
Technical specification
• Material: Retaining core: polypropylene Yarn: cotton • Inside diameter: 26 mm • Outside diameter: 63 mm • Filter length: 125 mm (5”), 248 mm (9 3/4”) and 254 mm (10”) • Max. temperature: with retaining core made of polypropylene up to +80 °C; with retaining core made of stainless steel up to +130 °C • Performance: see table (at a pressure difference of 0.15 bar and various viscosities)
Material support body: PP Item
Length
mm
Filter fineness µm
58915 58916 58917
125 125 125
0.5 1 5
108 THOMAPLAST® I - 2015
Max. DR at 1 °E1 l/h
Yarn
Price
EURO
55 75 225
cotton cotton cotton
15.00 15.00 15.00
Filtration Item
Length
mm
Filter fineness µm
58918 58919 58895 58896 53872 53873 53874 53875 53876 53877 53878 53865 53866 53867 53868 53869 53870 53871 58897 58898 12073 12074 12075 12076 12077 53886 53887 53888 53889 53890 53891 53892 53879 53880 53881 53882 53883 53884 53885 12078 12079 12080 12081 12082 12083 12084 53900 53901 53902 53903 53904 53905 53906 53893 53894
125 125 125 125 248 248 248 248 248 248 248 254 254 254 254 254 254 254 125 125 125 125 125 125 125 248 248 248 248 248 248 248 254 254 254 254 254 254 254 125 125 125 125 125 125 125 248 248 248 248 248 248 248 254 254
10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1
Max. DR at 1 °E1 l/h
Yarn
Price
EURO
360 675 1,000 1,000 107 145 440 705 1,325 2,000 2,000 110 150 450 720 1,350 2,000 2,000 55 75 225 360 675 1,000 1,000 107 145 440 705 1,325 2,000 2,000 110 150 450 720 1,350 2,000 2,000 55 75 225 360 675 1,000 1,000 107 145 440 705 1,325 2,000 2,000 110 150
cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose
15.00 15.00 15.00 15.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
Separation Technology - Filter Housings and Filter Elements Item
mm
Filter fineness µm
53895 53896 53897 53898 53899
254 254 254 254 254
5 10 25 50 100
1
Length
Max. DR at 1 °E1 l/h
Yarn
450 720 1,350 2,000 2,000
Max. DR at 1 °E1 l/h
Material yarn
Price EURO
55 75 225 360 675 1,000 1,000 107 145 440 705 1,325 2,000 2,000 110 150 450 720 1,350 2,000 2,000 55 75 225 360 675 1,000 1,000 107 145 440 705 1,325 2,000 2,000 110 150 450 720 1,350 2,000 2,000 55 75
cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton cotton PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP viscose viscose
18.00 18.00 18.00 18.00 18.00 18.00 18.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 18.00 18.00
Filtration
Price
Item
EURO
viscose viscose viscose viscose viscose
19.00 19.00 19.00 19.00 19.00
12101 12102 12103 12104 12105 53943 53944 53945 53946 53947 53948 53949 53936 53937 53938 53939 53940 53941 53942
DR = delivery rate
Material support body: stainless steel Item
Length
mm
Filter fineness µm
12085 12086 12087 12088 12089 12090 12091 53915 53916 53917 53918 53919 53920 53921 53908 53909 53910 53911 53912 53913 53914 12092 12093 12094 12095 12096 12097 12098 53929 53930 53931 53932 53933 53934 53935 53922 53923 53924 53925 53926 53927 53928 12099 12100
125 125 125 125 125 125 125 248 248 248 248 248 248 248 254 254 254 254 254 254 254 125 125 125 125 125 125 125 248 248 248 248 248 248 248 254 254 254 254 254 254 254 125 125
0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1
1
Length mm
Filter fineness µm
Max. DR at 1 °E1 l/h
Material yarn
Price EURO
125 125 125 125 125 248 248 248 248 248 248 248 254 254 254 254 254 254 254
5 10 25 50 100 0.5 1 5 10 25 50 100 0.5 1 5 10 25 50 100
225 360 675 1,000 1,000 107 145 440 705 1,325 2,000 2,000 110 150 450 720 1,350 2,000 2,000
viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose viscose
18.00 18.00 18.00 18.00 18.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00
DR = delivery rate
THOMAPOR®-Filter Cartridge with PVC Membrane Application area
• For preparation of ultrapure water (18 Megohm quality with 0.2 µm pore size and 14 Megohm with 0.4 µm pore size) • For recovery of noble metals in electroplating baths • For filtration of drinking water, pharmaceuticals, food and beverages • For sterile filtration
Technical specification
• Material: Membrane: high-temperature CPVC-polymer Retaining core: PP (polypropylene) End caps: flexible polyvinylchloride (PVC) • Cartridge length: 248 mm (fitting housings: items 94445, 52851, 52853, 94479, 52863) • Cartridge diameter: 70 mm • pH-range: 1 - 11 • Max. temperature: +90 °C • Max. operating pressure: 0.5 bar
Item
Pore size µm
Filter area m²
Max. flow rate water l/min.
Bubble Point bar
Unit
Price
piece
EURO
94444 94457
0.4 0.9
1.5 1.5
13.5 19
0.15 0.03
1 1
109.00 103.00
THOMAPLAST® I - 2015 109
Separation Technology - Filter Housings and Filter Elements THOMAPOR®-Sintered Candle made of HDPE
Filtration
THOMAPOR®-Filter Element with Activated Carbon for Dehalogenating
Application area
• Filtration of gases and fluids for separation of particles (clarification, water filtration, catalyst recovery) • Use of the porous structure and the chemical resistance (separation of emulsions, condensate separation, diaphragm in the electrochemistry) • Gassing of fluids by homogenous injection (feeding of oxygen in water, formation of defined flux foam for soldering technology.
Product specification
• Resistance: alcohol, aliphatic hydrocarbons, organic compounds, alkalis, acids, salt solutions • The filter elements fit following housings: Filter length 125 mm: item 94482 Filter length 248 mm: items 94445, 52851, 52853, 94479, 52863 Filter length 508 mm: items 52852, 12134 • Accessories: each sintered candle element has always to be built-in with two flat seals in the filter housing (12131-12133)
Application area
• Dehalogenating of drinking water • Removal of chlorine, bromine and iodine at low flow rates
Technical specification
• Material: activated carbon • pH range: 5 - 10 • Pressure drop: 0.06 bar • Max. temperature: up to +38 °C • The filter elements fit following housings: Filter length 125 mm: housing with cat. no. 94482 Filter length 248 mm: housings with cat. no. 94445, 52851, 52853, 94479, 52863
Technical specification
• Material: hydrophobic, porous polyethylene (HDPE) • Max. temperature: +80 °C
Item
Max. flow rate water l/min.
Length mm
Unit piece
Price EURO
4 4
125 254
1 1
28.00 37.00
94481 12106 Item
Length
mm
12119 12120 12122 12121 12123 12124 12126 12125 12127 12128 12130 12129
125 125 125 125 248 248 248 248 508 508 508 508
Filter Porosity Permeability Unit fineness µm % nPm piece 2.5 5 20 50 2.5 5 20 50 2.5 5 20 50
35 40 40 45 35 40 40 45 35 40 40 45
30 80 180 800 30 80 180 800 30 80 180 800
1 1 1 1 1 1 1 1 1 1 1 1
Price
THOMAPOR®-Adsorption Filter with Activated Carbon
EURO
Application area
73.00 73.00 73.00 73.00 101.00 101.00 101.00 101.00 171.00 171.00 171.00 171.00
RCT®-Accessories: Flat Seals for Sintered Candle Elements
• Decolourization of fluids such as drinking water, process water and waste water, aqueous solutions, organic solvents and non-oxidizing acids. • Removal of adsorbable matters and contaminants out of fluids, vapours and gases (e.g. acrylic acid amides out of exhaust gases), removal of oil out of compressed air up to concentrations below 0.01 mg/m3 (standard). • Removal of flavours and odors out of fluids, gases and vapours • Removal of ozone out of gases up to 0.03 mg/m3 (standard) • Dechlorination of water
Product specification
• Filter consisting of carbon-bound, sintered activated carbon, thus of chemically purest, biologically inert carbon • The filter elements fit following housings: Filter length 125 mm: item 94482 Filter length 250 mm: items 94445, 52851, 52853, 94479, 52863 Filter length 500 mm: items 52852, 12134
Item 12131 12132 12133
Material
Dimensions mm
Unit piece
Price EURO
NBR FPM PTFE
70/40 x 3 70/40 x 3 70/40 x 3
2 2 2
16.00 33.00 47.00
Technical specification
• Material density: 0.7 g/cm3 • Mean pore size: 20 µm • Porosity: 63 % • Specific permeability: 25 nPm • Bursting pressure strength: >5 bar • Max. temperature: +180 °C (in presence of air oxygen) • pH range: 0 - 14
110 THOMAPLAST® I - 2015
Separation Technology - Filter Housings and Filter Elements
Filtration Item
mm
Max. flow rate liquids1 l/h
53816
762
1,100
1
Length
Outside Ø
Unit
Price
mm
piece
EURO
70
1
109.00
at 0.2 bar pressure and 1° E viscosity
THOMAPOR®-Filter Element with Activated Carbon electroplating technology Item 12281 12282 12283
Length mm
Inside Ø mm
Outside Ø mm
Unit piece
Price EURO
120 250 500
30 30 30
70 70 70
1 1 1
135.00 181.00 269.00
THOMAPOR®-Filter Element with Activated Carbon purification of water Application area
Application area
• Filtration of noble metal baths in the electroplating technology
Product specification
• This special filter protects high-grade electrolytic baths for gold, silver and platinum from being contaminated by oils, fats and concomitant organic compounds. • The filter elements fit following housings: Filter length 125 mm: item 94482 Filter length 248 and 254 mm: items 94445, 52851, 52853, 94479, 52863 Filter length 496 and 500 mm: items 52852, 12134
Technical specification
• Purification of drinking water • Purification of industrial water
Product specification
• Max. temperature: +70 °C • Max. differential pressure: 4 bar • Fineness: 3-5 µm
• All materials used for manufacturing the filter element meet the food law. The used special activated carbon guarantees a very good taste and odour improvement of the filtered water. • The filter elements fit following housings: Filter length 125 mm: item 94482 Filter length 248 and 254 mm: items 94445, 52851, 52853, 94479, 52863 Filter length 496 and 500 mm: items 52852, 12134
Technical specification
• Max. temperature: +70 °C • Max. differential pressure: 4 bar • Fineness: 3-5 µm
Item
mm
Max. flow rate liquids1 l/h
53829 53830 53831 53832 53833 53834 53835 53836 53837 53838
76 102 125 152 248 254 496 508 742 762
110 150 185 220 360 365 720 735 1,075 1,100
1
Length
Outside Ø
Unit
Price
mm
piece
EURO
70 70 70 70 70 70 70 70 70 70
1 1 1 1 1 1 1 1 1 1
35.00 35.00 35.00 35.00 35.00 35.00 78.00 78.00 95.00 95.00
at 0.2 bar pressure and 1° E viscosity
Fine Filter Systems made of PVDF and PTFE
Item
Length
mm
Max. flow rate liquids1 l/h
53807 53808 53809 53810 53811 53812 53813 53814 53815
76 102 125 152 248 254 496 508 742
110 150 185 220 360 365 720 735 1,075
Outside Ø
Unit
Price
mm
piece
EURO
70 70 70 70 70 70 70 70 70
1 1 1 1 1 1 1 1 1
43.00 43.00 43.00 43.00 43.00 43.00 109.00 109.00 109.00
THOMAPOR®-High-Tech Fine Filter System made of PVDF Application area
• Continuous gas and fluid filtration in laboratory and industry
Product specification
• Casable, highly chemical-inert and biocompatible filter system made of PVDF for all kinds of aggressive gaseous and liquid media with heavy-duty glass fiber or sintered PTFE-filter elements; variable wall mounting, three field-proven system and cartridge sizes, with screwable filter casing.
THOMAPLAST® I - 2015 111
Separation Technology - Fine Filter Systems made of PVDF, and PTFE Technical specification
• Media contacting materials: Filter top: PVDF Filter casing: tempered glass Filter candle: optionally sintered PTFE or glass fibre Sealing rings: FPM • Pore sizes (nominal): 2 µm for glass fibre; 25 µm for sintered PTFE • Filter area: 60 cm2 for sintered PTFE filter element; 80 cm2 for glass fibre filter element • Max. temperature: +80 °C • Max. operating pressure: 4 bar • Free volume: 57 ml (dead volume) • Dimensions: Overall height: depending on element Max. overall width: approx. 65 mm • Diameter filter bowl: 40 mm • Connections: G 1/4“ • Weight: approx. 0.25 kg
Filtration
Technical specification
• Material: Filter housing: PTFE (polytetrafluoroethylene) Filter candles: PTFE (with microporous structure) Filter casing: tempered glass • Filtration rating: 5, 25, 50 or 100 µm • Filter surface: 48 cm2 • Max. temperature of medium: +180 °C • Connection: internal thread G 1/8“ • Fastening thread: M4x10
Item
Filter fineness µm
Max. flow rate gases1 l/h
Price EURO
5 25 50 100
900 900 900 900
344.00 352.00 360.00 368.00
341683 341684 341685 341686 1
Item
Design1
15507 15508 15509
system system system filter element for 155101 15507 filter element for 155111 15508, 15509 filter element for 155121 15508, 15509
Material filter
Filter area cm²
Pore size µm
Price EURO
glass fibre sinter PTFE sinter PTFE
80 60 60
2 2 25
251.00 305.00 305.00
glass fibre
80
2
42.00
sinter PTFE
60
2
148.00
sinter PTFE
60
25
148.00
System: complete system, quick-acting closure, without condensate bleeder, filter element 1
THOMAPOR®-High-Chem Fine Filter made of PTFE for Front Panel Installation Application area
• Filter system for front panel installations. • The filter can also be installed as a 19“ rack module in analysis systems.
Product specification
• Hose or pipe lines are placed behind the front panel. • Filter is easily accessible from outside by release of the sight glass. • The sight glass allows visual assessment of the contamination level from outside. • At high contamination level the filter cartridges can be quickly and easily replaced by release of the sight glass at the front side. • Accessories: THOMAPOR®-High-Chem PTFE filter cartridges with microporous structure.
112 THOMAPLAST® I - 2015
Air (l/h at 0.1 bar)
RCT®-Accessories: High-Chem Filter Cartridge made of PTFE with Microporous Structure
Item 341687 341688 341689 341690
Filter fineness µm
Unit piece
Price EURO
5 25 50 100
3 3 3 3
48.00 51.00 57.00 63.00
ThomaPLAST® I
To provide you with the best possible information about the application areas of our products, we take great care to give you a detailed, precise and technically up-to-date description. However, please note, that we cannot be held liable for any errors. Any values given are recommendations only that have been tested under normal conditions. We suggest, that you test the product under the appropriate conditions determined by your specific use of the application. If you need any help, we will gladly share our experiences with you to give you further assistance.
Our product range is clearly classified into four product groups and presented in detail in other handbooks. THOMAFLUID® I-V Hoses, dosing and connection technology THOMAPLAST® I-V Laboratory plastics, semi-finished products, closure and fastening elements and gaskets THOMAPOR® Separation technology THOMADRIVE® Drive technology Examples of the extremely wide range of products are employed in virtually every sector of industry. The spectrum extends from hoses and fluids technology through elastomers and semi-finished products, plastics and bonding technology to laboratories and filtration technology.
The prices in this handbook are valid for the currency area of the „European Union“ ! No minimum order. Subject to technical and price change. © 2015 Copyright by Reichelt Chemietechnik GmbH + Co.
Request our complete programme free of charge and without obligation or visit our homepage at www.rct-online.de
Reichelt Chemietechnik GmbH + Co.
EnglerstraĂ&#x;e 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de
Shopping per mouseclick www.rct-online.de