Thomaplast II (english)

Reichelt Chemietechnik GmbH + Co.

ThomaPLASTÂŽ II Semi-Finished Products Tapes, Foils and Plates Wires, Rods and Pipes Cords and Profiles Materials: Elastomers, Plastics, Glass Fibre, Ceramic, Metals, Foam Rubbers, Synthetic, Natural Materials

Reichelt Chemietechnik ’15 Shopping per mouseclick www.rct-online.de

Reichelt Chemietechnik GmbH + Co.

Englerstraße 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de

„Kornmarkt-Madonna“ in Heidelberg

Inhaltsübersicht nach Werkstoffen Content: Semi-Finished Products (Elastomere)

Seite page

Tapes (0.025 - 8.0 mm) Tapes: sealing, protection, adhesive, high-temperature, slip adhesive, foam adhesive single- and double-coated • Elastomers and Plastics: 3 - 11 PTFE, PE, PVC, PETP, polyester, PI, paper, silicone, PET, CR, PUR, LDPE, PE • Glass Fibre and Ceramic 12 - 14 • Metals: aluminium, copper 14

Foils (0.002 - 2.0 mm) Films, thermo foils, thermo caps, self-adhesive on one side or on both sides • Elastomers: silicone • Plastics: CA, ECTFE, FEP, PA, PC, PE, PEEK, PES, PETP, PI, PP, PTFE, PVDF, TPX • Glass Fabric • Metals: aluminium, copper, graphite, iron, stainless steel, zinc

15 - 17 17 - 24 24 - 27 27 - 30

Plates (0.1 - 60 mm) • Elastomers: IIR, PTFE, CR, SBR, CSM, EPDM, PP, FPM, NBR, NR, PUR (Vulkollan®), PVC, silicone shore hardness: 25° - 90° • Foam Rubbers: CR, EPDM, FPM, NBR, NR, PUR, PE, PEUR, silicone • Plastics: PA, PC, PCTFE, PE, HDPE, PEEK, PI, PMMA, POM, PP, PS, PTFE, PVC-rigid, PVDF • Ceramic, Synthetic and Natural Materials: glass ceramic, aramid, graphite, cork, synthetic, vulcanized fibre • Metals: aluminium, stainless steel, copper, brass, steel

30 - 50

50 - 60 60 - 71 72 - 74 74 - 76

THOMAPLAST® II - 2015

Content: Semi-Finished Products Welding Wires (2.0 - 3.5 mm)

page 76 - 78

• HDPE, PP, PVC-rigid, MFA, PFA, PVDF

Rods (2 - 210 mm) solid rod, square rod • Elastomers, Plastics and Glass Ceramic PA, PC, PCTFE, PEEK, PI, PMMA, POM, PP, PTFE, PUR (Vulkollan®), PVC-rigid, PVDF • Metals: aluminium, stainless steel, copper, brass

Pipes (4 - 112 mm)

78 - 90 90 - 92

92 - 96

• PA, PTFE, PUR (Vulkollan ), PVC-rigid ®

Cords (0.8 - 30 mm)

96 - 107

round cord, foam rubber round cord • CR, EPDM, EPDM/PP, FPM, NBR, NR, silicone, TPE, PTFE, glass fibre fabric, ceramic fabric, stainless steel

Profiles rectangular, triangular, U-profile • Elastomers: CR, EPDM, EPDM/PP, NBR further components of our Profile Program: see THOMAPLAST®-Handbook III

THOMAPLAST® II - 2015

107 - 112

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Tapes (0.025 - 8.0 mm) Elastomers and Plastics Semi-Finished Products THOMAPLAST®-High-Tech PTFE Sealing Tape Application area

• For sealing of threads at distilleries, hydraulic systems, fuel and chemical pipelines, lubricant piping, steam and hot water pipelines.

Product specification

Item ​

• Very good chemical resistance • Outstanding temperature resistance • Very good dielectric properties • Very good coefficient of sliding friction • Antiadhesive surface

340467

Width mm

Thickness mm

Length m

Unit piece

Price EURO

200

0.08

200

1

78.00

THOMAPLAST®-Adhesive Tape made of PVC single-coated

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Temperature range: -200 to +260 °C • Thickness: 0.08 mm • Design: non-sintered and soft

Product specification

• Good mechanical strength • High dimensional stability • Very good dielectric properties • Hardly inflammable • Resistant to weather • Usable at low temperatures • Good chemical resistance

​

Technical specification

Item ​

Width mm

Thickness mm

Length m

Unit piece

Price EURO

301190 301191 301192 301193 301194 60361

6.4 9.5 12.7 19 25.4 12

0.08 0.08 0.08 0.08 0.08 0.1

13.7 13.7 13.7 13.7 13.7 12

1 1 1 1 1 3

21.00 24.00 24.00 29.00 34.00 39.00

• Material: PVC (polyvinyl chloride) • Colour: silvery-grey • Temperature range: -25 to +60 °C • Thickness: 0.2 mm • Adhesive power: up to 250 g/cm • Breakdown voltage: 12,000 V • Tensile strength: 180 % • Design: soft, self-adhesive on one side ​

THOMAPLAST®-Protection Tape made of PE Application area

• Protective film for brushed metals • Protective film for polished metals • Cutting and bending of plastics • Particularly suited for plastics such as PMMA, polystyrene and PVC • For use in automotive area • For prevention of bubbling during the laser cutting process

Product specification

• Good UV resistance, oil resistant • Extraordinary adhesive power • Removable without leaving adhesive residues

Technical specification

• Material: PE (polyethylene) • Colour: one side black, one side white • Adhesive: acrylic • Design: adhesive surface on one side

Item ​ 13833 13834 13835 13836 13837 13838 13839 13840 13841 13842 13843

Width mm

Thickness mm

Length m

Unit piece

Price EURO

10 15 20 25 30 40 50 60 70 80 100

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2

10 15 20 25 30 40 50 60 70 80 100

1 1 1 1 1 1 1 1 1 1 1

29.00 34.00 39.00 41.00 44.00 54.00 59.00 67.00 69.00 82.00 95.00

​

THOMAPLAST® II - 2015 3

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

THOMAPLAST®-Adhesive Tape made of PVC double-coated Application area

• Bonding and fixing of mounting components • Fixing and fastening of conduits and trunking • Fixing and bonding of mounting rails • Bonding of mouldings in furniture industry • Fastening of components in electrical engineering and electronic engineering

Product specification

• Outstandingly suitable for durable connection of different materials such as metals, plastics, rubber, glass, wood and paper.

Item ​ 340432 340433 340434

Technical specification

• Material: PVC (Polyvinylchloride) • Colour: white • Temperature range: -40 to +110 °C • Adhesive: acrylate • Thickness: 0.275 mm • Peel strength: 40 N / 25 mm (on steel - AFERA 4001) • Shear strength: 45 N / 625 mm2 at +20 °C (AFERA 4012) • Design: adhesive surface on both sides

340478 340479 340480 340481

Thickness mm

Length m

Unit piece

Price EURO

25 50 100

0.065 0.065 0.065

66 66 66

1 1 1

25.00 38.00 49.00

THOMAPLAST®-Assembly Adhesive Tape made of PETP Product specification

​

Item ​

Width mm

Width mm

Thickness mm

Length m

Unit piece

Price EURO

12 15 19 25

0.275 0.275 0.275 0.275

50 50 50 50

1 1 1 1

36.00 44.00 52.00 70.00

THOMAPLAST®-Assembly Adhesive Tape made of PVC Application area

• For covering and protection of sensitive surfaces in assembly and production processes.

• Very low creeping tendency • High dimensional stability and wear-resistance • Good mechanical stability • Good coefficient of sliding friction • Very high stiffness and hardness • Good temperature resistance • Not resistant to hydrolysis • Good abrasion resistance • Good resistance to UV-radiation and weather • Self-extinguishing • Unstable to halogenated solutions as well as conc. alkalis and mineral acids • Universal insulation tape in electrical engineering for roller-type capacitors, cable connections, and for use as protective film • For covering of masks during marking, coating and spraying • As vacuum bag for composite manufacturing of laminates • As protective film for electronic prints

Technical specification

• Material: PETP (polyethylene-terephthalate) • Colour: yellow • Design: self-adhesive (rubber adhesive, heat-curing) • Adhesive layer: approx. 0.04 mm • Density: 1.37 g/cm3 (DIN 53479) • Temperature range: -18 to +163 °C • Dielectric strength: 60 kV/mm ​

Product specification

• High-power adhesive tape • UV-resistant • Resistant to weather • Adhesive coating leaves no residues on the masked surface when removing the tape

Technical specification

• Material: Hard-PVC (polyvinyl chloride) • Colour: blue-transparent • Temperature range: -5 to +50 °C, for a short time +70 °C • Adhesive: rubber • Adhesive layer: 0.06 mm • Adhesion: 1.5 N / 25 mm • Design: adhesive surface on one side ​

4 THOMAPLAST® II - 2015

Item ​

Width mm

Thickness mm

Length m

Unit piece

Price EURO

301127 301128

25.4 50.8

0.025 0.025

66 66

1 1

100.00 144.00

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Item ​

Width mm

Thickness mm

Length m

Unit piece

Price EURO

301129 301130

25.4 50.8

0.051 0.051

66 66

1 1

136.00 195.00

THOMAPLAST®-Adhesive Tape made of Polyester Product specification

• This all-purpose tape is suitable for the most masking applications including powder coatings and anodizing.

• The tape is easy to apply and therefore particularly suitable for urgent applications.

• Good conformability und high abrasion resistance • No shrinkage at elevated temperatures • Clean and residue-free removal • Very good chemical resistance

Technical specification

• Material: polyester • Max. temperature: +180 °C • Adhesive: silicone • Dielectric strength: 6.5 V • Breaking strength: 8.9 kg/cm • Storage: outside direct solar radiation, at +21 °C and 50 % RH • Linear expansion: 90 % • Adhesion to steel: green tape: 0.35 kg/cm blue tape: 0.39 kg/cm

THOMAPLAST®-Adhesive Tape made of PTFE Application area

• Rolling technology, chemical engineering, plant construction, industrial engineering, process technology

Product specification

• Excellent thermal resistance • Extremely thin adhesive tape • Highest chemical resistance • Low friction coefficient • Good adhesive repellent properties • Outstanding matching to uneven surfaces

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: transparent/translucent • Temperature range: -50 to +200 °C, for a short time up to+250 °C • Adhesive: silicone • Thickness: 0.09 mm • Stretching: 150 % • Breaking load: 385 N / 100 mm • Peel strength on steel: 29 N / 100 mm ​

​

Item ​

Item ​ 315216 315217 315218 315219 315220 315221 315222 315223 340435 332386 315224 332387 332388 315226 340436

Width mm

Thickness mm

Colour ​

12 18 25 30 40 50 75 100 6 9 12 19 25 50 38

0.088 0.088 0.088 0.088 0.088 0.088 0.088 0.088 0.075 0.075 0.075 0.075 0.075 0.075 0.075

green green green green green green green green blue blue blue blue blue blue blue

Length Unit m piece 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 66.00 98.00 114.00 130.00 152.00 172.00 228.00 304.00 42.00 60.00 82.00 114.00 148.00 168.00 198.00

340468 340469 340470 340471 340472 340430 340473 340431 340474

Width mm

Thickness mm

Length m

Unit piece

Price EURO

6 9 12 15 19 25 38 50 75

0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09

33 33 33 33 33 33 33 33 33

1 1 1 1 1 1 1 1 1

96.00 124.00 144.00 168.00 192.00 244.00 454.00 478.00 718.00

THOMAPLAST®-Adhesive Tape made of PI - Standard Application area

• Semi-conductor industry, reactor construction, automobile and electrical industry, defense technology, chemical industry • Especially suitable for masking of contacts during the soldering process on circuit boards (gold contacts)

Product specification

• High-power adhesive tape • Outstandingly high operating temperature limit • Remarkable mechanical stability • Very good abrasion resistance • Good chemical resistance

THOMAPLAST® II - 2015 5

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Technical specification

Item ​

• Material: Pl (polyimide) • Colour: grey/white • Max. temperature: +180 °C • Adhesive: silicone • Peel strength: 2.5 N (on steel) • Tensile strength: 53 N • Insulation: H • UL-listing: UL510 • Dielectrical strength: 6,500 Volt • Design: adhesive surface on one side

Width mm

Thickness mm

Length m

Unit piece

Price EURO

12 25 50

0.063 0.063 0.063

33 33 33

1 1 1

148.00 234.00 424.00

315210 315211 315212

THOMAPLAST®-Adhesive Tape made of Paper Product specification

• Masking tape in three crepe paper designs for different temperature ranges from +80 to +180 °C • All-purpose masking tape for the most low-temperature applications • Usable with synthetic enamel paints, cellulose and acrylic lacquers

​

Technical specification

Item ​ 340424 340425 340426 340427 332384 332385

Width mm

Thickness mm

Length m

Unit piece

Price EURO

6 9 12 15 19 25

0.06 0.06 0.06 0.06 0.06 0.06

33 33 33 33 33 33

1 1 1 1 1 1

33.00 47.00 62.00 76.00 80.00 124.00

THOMAPLAST®-Adhesive Tape made of PI High-Temperature Product specification

• These high-performance masking tapes can be used for a short time at temperatures up to +300 °C and in continuous use up to +260 °C • Extremely resistant to chemicals and abrasion • For powder coatings and galvanizations • Clean and residue-free removal

Technical specification

• Material: PI (polyimide substrate) • Colour: amber • Temperature range: -250 to +260 °C, for a short time +300 °C • Adhesive: silicone • Linear expansion: 70 % • Storage: outside direct solar radiation, at +21 °C and 50 % RH ​

• Material: crepe paper • Colour: white • Max. temperature: +180 °C • Adhesive: 315227+315228: rubber 315229+315230: silicone • Linear expansion: 8 % • Storage: outside direct solar radiation; at +21 °C and 50 % RH ​

Item ​ 315227 315228 3152291 3152301

Width Thickness Length Max. temp. Unit mm mm m °C piece 25 25 18 25

0.12 0.55 0.14 0.14

50 50 50 50

80 135 180 180

1 1 1 1

Price EURO 32.00 34.00 70.00 96.00

This masking tape is fitted with a silicone adhesive system particularly developed for high temperature coatings.

1

THOMAPLAST®-Adhesive Tape made of Silicone self-fusing Product specification

• The tape is self-fusing and self-adhering providing a void-free homogeneous wrapping • It forms a homogeneous mass within 24 hours at room temperature or in 4 minutes at +180 °C • Without adhesive, thus residue-free removal • Can easily cover irregular shapes or uneven surfaces

Technical specification

• Material: silicone (silicone rubber) • Colour: dark-red • Max. temperature: +260 °C • Adhesive: without • Linear expansion: 300 % • Storage: outside direct solar radiation; at +21 °C and 50 % RH ​

6 THOMAPLAST® II - 2015

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Technical specification

• Material: PET (polyester) • Colour: highly transparent • Cover: PE paper, (PP film) siliconized on both sides • Adhesive: polyacrylic-based high-performance adhesive • Peel strength: 148 N / 100 mm (on steel - AFERA 4001) • Shear strength: 75 N / 625 mm2 at +20 °C (AFERA 2012) • Temperature range: -40 to +90 °C, for a short time up to+150 °C Item ​ Item ​ 315215

Width mm

Thickness mm

Length m

Unit piece

Price EURO

25.4

0.51

11

1

165.00

THOMAPLAST®-High-Power Adhesive Tape made of PET – double-coated Application area

• Electronics and electrical engineering, for permanent bonding of smallest components • For vibration damping, and as sealing element in machine engineering and precision mechanics • As construction tape in chemical engineering and apparatus construction

General product specification

• The bonding technique allows the use in applications where the mechanical joining techniques such as screwing, riveting, clipping or welding etc. were preferred up to now.

• The film thickness allows a permanent bonding of materials without substantially increasing the overall thickness of the component.

• The joinings are invisible due to the transparency of the adhesive film.

The extremely thin adhesive film simplifies the adhesion of round components with tight radii.

• The bonding technique ensures the vibration damping and the sealing function, thus preventing the intrusion of liquids and dust.

• The adhesive tape is resistant to plasticizers.

• The adhesive surface guarantees constant force distribution.

• No material deformation • No stress cracking • Highest final adhesive strength and adaptability • The adhesive tape should be stored at a relative air humidity of 50 % and a storage temperature of approx. +20 °C. • Chemical-resistant to most alkalis, acids, and solvents

340494 340495 340496 340497 340498 340499

Width mm

Thickness mm

Length m

Unit piece

Price EURO

9 15 19 25 30 38

0.5 0.5 0.5 0.5 0.5 0.5

33 33 33 33 33 33

1 1 1 1 1 1

66.00 84.00 96.00 122.00 142.00 178.00

THOMAPLAST®-High-Power Adhesive Tape made of PET up to +90 °C - double-coated, thickness: 1 mm Product specification

• Good temperature resistance • Suitable for bonding of acrylic materials and glass

Technical specification

• Material: PET (polyester) • Colour: highly transparent • Cover: PE paper, (PP film) siliconized on both sides • Adhesive: polyacrylic-based high-performance adhesive • Peel strength: 172 N / 100 mm (on steel - AFERA 4001) • Shear strength: 45 N / 625 mm2 at +20 °C (AFERA 2012) • Temperature range: -40 to +90 °C, for a short time up to+150 °C ​

​

THOMAPLAST®-High-Power Adhesive Tape made of PET up to +90 °C - double-coated, thickness: 0.5 mm Product specification

• Good temperature resistance • Suitable for bonding of acrylic materials and glass ​

Item ​ 340500 340501 340502 340503 340504 340505

Width mm

Thickness mm

Length m

Unit piece

Price EURO

6 9 12 15 19 25

1 1 1 1 1 1

33 33 33 33 33 33

1 1 1 1 1 1

62.00 88.00 98.00 116.00 144.00 176.00

THOMAPLAST®-High-Power Adhesive Tape made of PET up to +150 °C - double-coated Product specification

• High temperature resistance • The high-performance adhesive tape is particularly suited for bonding high-energy materials, such as metal, non-ferrous metals, wood, glass, ceramics, plastics like ABS, PC, PMMA, PVC etc.

THOMAPLAST® II - 2015 7

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Technical specification

• Material: PET (polyester special compound) • Colour: highly transparent • Temperature range: -40 to +150 °C, for a short time up to +260 °C • Adhesive: acrylate • Thickness: 0.25 mm • Peel strength: 128 N / 100 mm (on steel - AFERA 4001) • Shear strength: 75 N / 625 mm2 at +20 °C (AFERA 2012) ​

Item ​ 340488 340489 340490 340491 340492 340493

Width mm

Thickness mm

Length m

Unit piece

Price EURO

6 9 12 15 19 25

0.25 0.25 0.25 0.25 0.25 0.25

55 55 55 55 55 55

1 1 1 1 1 1

42.00 62.00 80.00 92.00 116.00 148.00

THOMAPLAST®-Slip Adhesive Tape made of PE Application area

• As slip layer without higher loading, e.g. in conveying channels, funnels, guides of packaging machines.

• As antiadhesive and separating layer of filling stations and working devices in direct contact with sticky goods, food or pharmaceutical products.

• As antiadhesive coating at measuring devices and sports articles used in the winter season, as no adherence of snow or ice occurs.

Product specification

• Good coefficient of sliding friction (low cohesive friction) • Good abrasion resistance • Good impact toughness • Good dielectric properties • Antiadhesive surface • Good mechanical stability • Self-lubricating effect, extremely good sliding properties

Technical specification

• Material: UHMW-PE (polyethylene of ultrahigh molecular weight) • Colour: transparent/translucent, with blue carrier ribbon • Temperature range: -40 to +107 °C • Adhesive: acrylic • Adhesive layer: approx. 0.05 mm • Peel strength on steel: 19.8 N / 25 mm • Shear strength: 15.2 kPa • Design: sliced, self-adhesive Item ​

Width mm

Thickness mm

Length m

Unit piece

Price EURO

340421 340422 340423 301162 301163 301164 301165 301166

9 19 25 12.7 25.4 50.8 76.2 101.6

0.125 0.125 0.125 0.25 0.25 0.25 0.25 0.25

33 33 33 33 33 33 33 33

1 1 1 1 1 1 1 1

58.00 118.00 154.00 70.00 100.00 169.00 228.00 274.00

THOMAPLAST®-Slip Adhesive Tape made of PTFE Standard Product specification

• Extraordinary chemical resistance • Very good temperature resistance • Extremely low sliding friction • Very good dielectrical properties • Super smooth surface, antiadhesive, extremely low sliding friction, very good chemical resistance and dielectrical properties • As slide coating for very light goods in funnels, shutes etc.; as anti-stick and separating coating for moulding procedures, food, lab processes etc.; as electrical insulation foil

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Temperature range: -90 to +140 °C • Adhesive: one-sided with acryl-contact adhesive and protective film • Adhesive layer: approx. 0.05 mm • Design: multi-laminar cast

​

​

8 THOMAPLAST® II - 2015

Item ​

Width mm

Thickness mm

Length m

Price EURO

60364 60365 60367 60368 60369 60370

6.35 12.7 15.9 19.05 25.4 50.8

0.1 0.1 0.1 0.1 0.1 0.1

10 10 10 10 10 5

95.00 116.00 144.00 174.00 236.00 236.00

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Item ​

Width mm

Thickness mm

Length m

Price EURO

60371 60372 60374

76.2 101.6 304.8

0.1 0.1 0.1

3 3 1

210.00 271.00 274.00

THOMAPLAST®-Slip Adhesive Tape made of PTFE High-Temperature

THOMAPLAST®-Foam Adhesive Tape made of CR Product specification

• Good elastic behaviour • Good abrasion resistance • Good thermal resistance • Good resistance to ozone, aging, and weather • High flame resistance • Good chemical resistance to dilute acids and alkalis

Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Temperature range: -30 to +100 °C; adhesive power declining from +70 °C onwards • Adhesive: synthetic resin, stringy • Density: approx. 170 kg/m3 • Tolerance: DIN 7715 T5 P3 • Design: foamed, self-adhesive on one side, closed-cell; cover PE foil

Product specification

• Extraordinary chemical resistance • Very good temperature resistance • Extremely low sliding friction • Extremely antiadhesive surface • Very good dielectrical properties • Non-toxic • Suitable as heat-resistant, electrically insulating film

​

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: grey • Temperature range: -73 to +260 °C • Adhesive: silicone adhesive • Adhesive layer: approx. 0.045 mm • Elongation: 300 - 450 % • Design: sliced, self-adhesive on one side, with protective foil ​

Item ​

Item

Width Thickness

​

mm

mm

Tensile strength N/cm

301169 301170 301171 301172 301173 301174 301175 301176 301177 301178 301179 301180 301181 301182

10 30 50 100 10 30 50 80 100 10 30 50 80 100

0.08 0.08 0.08 0.08 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5

35 35 35 35 96 96 96 96 96 184 184 184 184 184

13844 13845 13846 13847 13848 13849 13850 13851 13852 13853 13854 13855 13856 13857 13858 13859

Adhesive Length Price strength N/cm m EURO 5.4 5.4 5.4 5.4 5.9 5.9 5.9 5.9 5.9 6.8 6.8 6.8 6.8 6.8

33 33 33 33 33 33 33 33 33 33 33 33 33 33

39.00 120.00 151.00 293.00 79.00 240.00 348.00 623.00 696.00 108.00 326.00 473.00 757.00 947.00

Width mm

Thickness mm

Length m

Unit piece

Price EURO

9 12 15 20 25 30 40 12 15 20 9 12 15 19 25 30

2 2 2 2 2 2 2 3 3 3 4 4 4 4 4 4

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

44.00 46.00 49.00 64.00 77.00 90.00 120.00 59.00 67.00 87.00 54.00 62.00 75.00 95.00 118.00 146.00

THOMAPLAST®-Foam Adhesive Tape made of PUR ​

THOMAPLAST® II - 2015 9

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Product specification

Item ​

• Very high mechanical strength • Excellent wear-resistance • Good resistance to aging and ozone • Good resistance to mineral oil • Low permeability to gases

13872 13873 13874 13875 13876

Technical specification

• Material: PUR (polyurethane) • Colour: white • Temperature range: -30 to +100 °C; (adhesive power declining at +70 °C) • Density: 30 kg/m3 • Adhesive: synthetic resin, stringy • Tolerance: DIN 7717 T3 E3 • Design: foamed, self-adhesive on one side (cover: PE-foil) Item ​ 13860 13861 13862 13863 13864 13865 13866 13867 13868 13869 13871

Width mm

Thickness mm

Length m

Unit piece

Price EURO

9 12 15 19 30 12 15 19 15 20 30

3 3 3 3 3 6 6 6 8 8 8

10 10 10 10 10 10 10 10 5 5 5

1 1 1 1 1 1 1 1 1 1 1

54.00 62.00 67.00 69.00 90.00 62.00 67.00 75.00 85.00 100.00 126.00

Width mm

Thickness mm

Length m

Unit piece

Price EURO

10 12 15 19 25

3 3 3 3 3

10 10 10 10 10

1 1 1 1 1

62.00 72.00 90.00 100.00 115.00

THOMAPLAST®-Foam Adhesive Tape made of PE double-coated Application area

• Adhesive tape for indoor and outdoor applications.

Product specification

• The high performance acrylate adhesive realizes highest adhesive strength on different materials such as metal, plastics and glass.

• The adhesive bond ensures best damping and sealing properties.

Technical specification

• Material: PE-Foam (polyethylene) • Colour: white • Max. temperature: up to +70 °C; for a short time up to +90 °C • Adhesive: acrylic • Thickness: 1.0 mm • Peel strength on steel: 28 N / 25 mm • Shear strength: 45 N / 625 mm2 (AFERA 4012 at +20 °C) • Design: adhesive surface on both sides ​

THOMAPLAST®-Foam Adhesive Tape made of LDPE - single-coated Product specification

• Good impact toughness • Good resistance to weather • Antiadhesive surface • Good chemical resistance

Technical specification

• Material: LDPE (plasticized polyethylene) • Colour: white • Temperature range: -40 to +80 °C; (adhesive power declining at +70 °C) • Density: approx. 45 kg/m3 • Adhesive: synthetic resin, stringy • Tolerance: DIN 7717 T3 E3 • Design: foamed, self-adhesive on one side ​

Item ​ 340482 340483 340484 340485 340486 340487

Width mm

Thickness mm

Length m

Unit piece

Price EURO

6 9 15 19 25 50

1 1 1 1 1 1

50 50 50 50 50 50

1 1 1 1 1 1

34.00 42.00 48.00 64.00 84.00 166.00

THOMAPLAST®-Foam Adhesive Tape made of Silicone Product specification

• Very good elastic behaviour • Excellent resistance to heat and hot air • Best flexibility in the cold • Very good resistance to ozone, aging, and weather • Very good dielectrical properties • Antiadhesive surface • High permeability to gases

10 THOMAPLAST® II - 2015

Semi-Finished Products - Elastomers and Plastics

Tapes (0.025 - 8.0 mm)

Technical specification

Technical specification

• Material: Si (silicone rubber) • Colour: reddish brown • Temperature range: -70 to +260 °C; adhesive power declining from +150 °C onwards • Density: approx. 50 kg/m3 • Adhesive: silicone base • Tolerance: DIN 7717 T3 E3 • Design: foamed, self-adhesive on one side, with protective foil

• Material: PTFE (polytetrafluoroethylene) • Material features: soft and flexible • Colour: white • Temperature range: -240 to +260 °C • Insert: none • Regulations: TÜV inspection, BAM inspection, DVGW-registered Item ​

​

Item ​ 13877 13878 13879 13880 13881

Width mm 25 10 12 25 19

Thickness Tolerance Length Unit mm mm m piece 1.6 2.4 3.18 3.18 4.75

±0.4 ±0.4 ±0.8 ±0.8 ±0.8

9 9 9 9 4.5

1 1 1 1 1

19500 19501 19502 19503 19504 19505 19506 19507 19508 19509 19510 19511 19512 19513 19514 19515 19516 19517 19518 19519 19520 19521 19522 19523

Price EURO 200.00 136.00 167.00 241.00 167.00

THOMAPLAST®-PTFE Sealing Tape Product specification

• Manufactured of virgin PTFE finest powder.

• Negative cold flow properties are strongly reduced by stretching of the fibre structure resulting in outstanding sealing properties.

• Resistant to aging, weather, ozone, and light, as it is produced without filler.

• Flat sealing tape (assembly tape) is fitted with adhesion strips for fastening.

• Irregularities are evened up by the tape.

• Larger uneven patches should be evened up with a thicker tape. If this is not sufficient, underfeeding is required.

• Good adhesion of the adhesive surface of the assembly tape on clean, dry sealing surface.

• The sealing tape (assembly tape) has to be put in place in such a way that the tape ends cross in front of a bolt.

• Impact use is not recommended.

• For use with glass fittings, a toothing or bevel cutting should be performed.

Width mm

Thickness mm

Length m

Unit piece

Price EURO

3 3 3 5 5 5 7 7 7 10 10 10 12 12 12 14 14 14 17 17 17 20 20 20

1.5 1.5 1.5 2 2 2 2.5 2.5 2.5 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7

5 10 25 5 10 25 5 10 25 5 10 25 5 10 20 5 10 20 5 10 20 5 10 20

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

34.00 62.00 123.00 44.00 80.00 167.00 57.00 98.00 208.00 80.00 121.00 223.00 111.00 192.00 330.00 123.00 208.00 343.00 139.00 233.00 369.00 169.00 271.00 407.00

Glass Fibre and Ceramic THOMAPLAST®-Glass Fibre Tape Product specification

• Fastening of strip heaters, heating cables and heating mats up to temperatures of +450 °C. ​

​

Item ​ 301639 301640

Width mm

Thickness mm

Length m

Unit piece

Price EURO

12 12

0.2 0.2

10 30

1 1

47.00 100.00

THOMAPLAST® II - 2015 11

Semi-Finished Products - Glass Fibre and Ceramic Item ​ 301641 301642 301643 301644

Tapes (0.025 - 8.0 mm)

Width mm

Thickness mm

Length m

Unit piece

Price EURO

12 20 20 20

0.2 0.2 0.2 0.2

50 10 30 50

1 1 1 1

131.00 95.00 192.00 233.00

THOMAPLAST®-Glass Fabric Adhesive Tape High-Temperature Product specification

• White glass fibre fabric, problem- and residue-free removal • Resistant to solvents and abrasion • The tightly interwoven glass fabric tape guarantees high tearing strength • Can be used in high-pressure applications such as sand blasting • Suitable as protection for powder coatings and wet paints

Technical specification

Product specification

• Combines the chemical material properties of PTFE with the extraordinary strength of highly tension-proof glass cloth • The material is best suited for heavy-duty insulations and cable sheathing due to its high dielectric strength together with excellent mechanical stability • Adhesive repellent surface • Highly tension-proof glass cloth, bonded with high-temperatureresistant silicone adhesive • High dielectric strength • Excellent chemical resistance • High abrasion resistance and durability • High tear resistance • High antiadhesion • Low friction • Excellent thermal resistance • Outstanding matching to uneven surfaces • Low cold flow at pressure load • Permanent dimensional stability

Technical specification

• Material: glass fabric • Colour: white • Max. temperature: +260 °C • Adhesive: silicone • Linear expansion: 5 % • Storage: outside direct solar radiation; at +21 °C and 50 % RH

• Material: PTFE (polytetrafluoroethylene), combined with glass cloth compound • Colour: yellow/brown • Max. temperature: +200 °C, for a short time up to+250 °C • Adhesive: silicone rubber • Thickness: 0.150 mm • Peel strength: 6.2 N/cm at +180 °C (ASTM D330) • Design: adhesive surface on one side

​

Item ​ 340428 340429 340475 340476 340477 Item ​ 315213 315214

Width mm

Thickness mm

Length m

Unit piece

Price EURO

12 25

0.15 0.15

50 50

1 1

144.00 236.00

THOMAPLAST®-Glass Fabric Adhesive Tape PTFE-coated Application area

• Industrial engineering, plant construction, chemical engineering, process technology • Outstanding suitability for lining of transport guide rails, chutes, and skids • Due to high temperature stability also usable for packers such as heat sealing devices, blister-foil packers, and tubing bag welders ​

Width mm

Thickness mm

Length m

Unit piece

Price EURO

9 15 19 25 70

0.15 0.15 0.15 0.15 0.15

33 33 33 33 33

1 1 1 1 1

152.00 182.00 204.00 256.00 768.00

THOMAPLAST®-High-Tech Glass Tape PTFE-Bonded, self-adhesive at one side Application area:

• Self-adhesive, antiadhesive finish on foil welding devices, drying and coating cylinders, and drum dryers.

• Slip coating at chutes, funnels, guides, slide pipes at packaging machines.

• Self-adhesive insulation foil for electrical engineering, chemical and process engineering.

Product specification

• Extremely antiadhesive surface • Minimal coefficient of sliding friction • Extremely high temperature resistance • Extraordinary chemical resistance • High tensile strength and dimensional stability • Low thermal expansion • Good dielectric properties • Transmissive for microwaves and UV-light • Non-toxic • Resistant to mildew, bacteria, and mould

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: brown • Design: PTFE-impregnated glass fabric, self-adhesive

12 THOMAPLAST® II - 2015

Semi-Finished Products - Glass Fibre and Ceramic

Tapes (0.025 - 8.0 mm)

• Adhesive: silicone adhesive, adhesive layer covered with removable PVC-film • Adhesive layer: approx. 0.05 mm • Temperature range: -73 to +260 °C • Type: AP: Standard design. Colour brown. Cloth with surface finish suitable for most applications; good material combination of mechanical and antiadhesive properties.

AAP: Cloth with especially high PTFE content and particularly smooth surface. Colour brown. ​

THOMAPLAST®-High-Therm-Glass Fibre Fabric Tape - asbestos-free Application area • Thermal insulating

Product specification

• Highest heat stability, very high mechanical stability • Non-combustible • Good chemical resistance, very high to oils, fats, alkalis, organic acids and vapors • Fitted with strong selvages on both sides.

Technical specification

• Material: glass fibre, made of EC 9 filament yarn, textured • Special features: asbestos-free • Temperature range: -10 to +450 °C, for a short time +550 °C ​

Item ​ 301198 301199 301200 301201 301202 301203 301204 301205 301206 301207 301208 301209 301210 301211 301212 301213 301214 301215 301216 301217 301218 301219 301220 301221 301222 301223 301224 301225 301226 301227 301228 301229

Thickness mm

Width mm

Type ​

0.073 0.073 0.073 0.073 0.073 0.073 0.073 0.073 0.073 0.073 0.122 0.122 0.122 0.122 0.122 0.122 0.122 0.122 0.122 0.122 0.152 0.152 0.152 0.152 0.235 0.235 0.235 0.235 0.235 0.235 0.235 0.235

13 13 25 25 50 50 100 100 200 200 13 13 25 25 50 50 100 100 300 300 25 25 50 50 13 13 25 25 50 50 100 100

AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP AAP AAP AAP AAP AP AP AP AP AP AP AP AP

Length Unit m piece 5 10 5 10 3 5 1 3 1 3 5 10 5 10 3 5 1 3 1 3 5 10 3 5 5 10 3 5 1 3 1 3

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 67.00 108.00 116.00 213.00 126.00 174.00 116.00 269.00 131.00 305.00 75.00 123.00 136.00 228.00 151.00 202.00 100.00 254.00 213.00 463.00 151.00 251.00 167.00 225.00 110.00 182.00 116.00 162.00 80.00 185.00 121.00 271.00

Item ​ 302297 302298 302299 302300 302301 302302 302303 302304 302309 302310 302311 302312 302313 302314 302315 302316 302317 302318 302323 302324

Thickness mm

Width mm

Length m

Unit piece

Price EURO

2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3

20 20 30 30 40 40 50 50 100 100 20 20 30 30 40 40 50 50 100 100

2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

41.00 77.00 50.00 94.00 62.00 116.00 78.00 147.00 145.00 269.00 45.00 85.00 60.00 112.00 74.00 140.00 90.00 170.00 172.00 324.00

THOMAPLAST®-High-Therm-Ceramic Fabric Tape asbestos-free Product specification

• Absolutely highest heat stability • Non-combustible • Very high mechanical stability • Good chemical resistance, very high to oils, fats, all chemicals, steam and water as well as liquid metals (aluminum, zinc etc.), not suitable for hydrofluoric acid, phosphoric acid, and some strong alkalis.

THOMAPLAST® II - 2015 13

Semi-Finished Products - Metals

Tapes (0.025 - 8.0 mm)

Technical specification

• Material: ceramic composition reinforced with chromium steel wire • Special features: round and twisted, asbestos-free • Temperature range: -10 to +1,100 °C ​

Technical specification

• Material: Al (aluminum) • Temperature range: -50 to +150 °C; (301660: max. +90 °C) • Adhesive: acrylic adhesive • Peel strength on steel: 27 N / 25 mm • Breaking load: 54 N / 25 mm • Design: adhesive surface on one side ​

Item ​ 302360 302361 302362 302363 302364 302365 302366 302367 302368 302369 302374 302375 302378 302379 302380 302381 302382 302383 302384 302385

Thickness mm

Width mm

Length m

Unit piece

Price EURO

2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3

10 10 20 20 30 30 40 40 50 50 100 100 30 30 40 40 50 50 100 100

2 5 2 5 2 5 2 5 2 5 1 3 2 5 2 5 2 5 1 3

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

25.00 48.00 45.00 85.00 63.00 117.00 82.00 123.00 101.00 189.00 107.00 248.00 82.00 154.00 105.00 197.00 131.00 247.00 134.00 311.00

Metals

Item

Width

​

mm

340383 340381 340382 332389 340384 332390 301660

25 38 50 50 50 100 75

Thickness Length Protective Unit paper mm m ​ piece 0.125 0.075 0.075 0.125 0.125 0.125 0.22

50 50 50 50 50 50 100

without with with with without with with

1 1 1 1 1 1 1

Price EURO 48.00 58.00 78.00 72.00 86.00 144.00 156.00

THOMAPLAST®-High-Therm Shielding Adhesive Tape made of Copper Application area

• Electrical engineering, for EMC-compatible production

Product specification

• For dissipation of electrostatic charge • For shielding of electromagnetic fields • Very good solderability • Flame-retardant according to UL • Smooth foil

Technical specification

THOMAPLAST -Adhesive Tape made of Aluminum ®

Application area

• Application in the semiconductor technology, galvanic industry and electrical engineering • For covering during galvanic processes and for the cavity sealing • For sealing of pipes and containers during gas-shielded welding • For lining of heat and air reflectors • For sealing of reaction vessels

Product specification

• Absolutely gas- and steam-tight • No restoring effect • Hardly inflammable • Diffusion resistant • Resistant to UV-radiation • Resistant to alkalis and acids • Adhesive tape is available in two versions: with protective paper as interlayer or without protective paper

14 THOMAPLAST® II - 2015

• Material: Cu (copper) • Temperature range: -40 to +130 °C • Adhesion: 10.2 N / 25 mm • Shear force: 7.6 kPa • Surface resistivity: 0.02 Ohm/2.5 cm2 • Design: adhesive surface on one side ​

Item ​ 332392 332393

Width mm

Thickness mm

Length m

Unit piece

Price EURO

19 25

0.07 0.07

33 33

1 1

138.00 182.00

Semi-Finished Products - Elastomers

Foils (0.002 - 2.0 mm) Item

Foils (0.002 - 2.0 mm) Elastomers

​

339569 0.3 339570 0.3 339571 0.45 339572 0.45 339573 0.8 339574 0.8

THOMAPLAST®-Components for Insulation and Heat Technology in Electronic Engineering General product specification

High-tech materials for heat problems in high-tech devices offer, compared to traditional use of mica with heat-conductive paste, the following important advantages: • Specified layer thicknesses • Quick and clean handling, superior process reliability • Interchangeability of materials without surface treatment • Safe reproducibility of results • Please note also the silicone-free heat technology products such as waxed PI sheets and carbon foils or heat-conductive paste.

​

THOMAPLAST®-Thermo-Silicone Foil (1.9 W/mK) Application area

• Power semiconductors and power modules in power supply units, electric drives, telecommunications modules, motor control units, frequency converters, UPS (uninterrupted power supply)

Product specification

• Extremely high thermal conductivity • Very low total thermal transfer resistance • Fibreglass reinforced for mechanical stability • Very flexible • Quick and clean handling, superior process reliability • No thermal paste required

Thick- Tensile Tear ness strength resist. mm MPa kN/m

1

24.1 24.1 20.4 20.4 9.3 9.3

69 69 68 68 24 24

Heat tr. resist.1 ​

Dimensions

Price

mm

EURO

0.45 0.45 0.65 0.65 1.05 1.05

320 x 1,000 320 x 250 320 x 1,000 320 x 250 320 x 1,000 320 x 250

210.00 96.00 330.00 140.00 546.00 222.00

Heat transfer resistance - inch2 x °C/W

THOMAPLAST®-Soft-Silicone Film, Thermally Conductive (2.5 W/mK) - self-adhesive on one side Application area

• SMD power modules, electrolytic capacitors, thermo sensors, highpower diodes, heat pipes, CD-ROM cooling, CPU modules, charging devices, UPS, SMPS, motor control units and cooling systems

Product specification

• High thermal conductivity • High dielectric strength • Very flexible and elastic • Self-adhesive on one side • Quick and easy handling, superior process reliability • Laminated for mechanical stability

Technical specification

• Material: soft silicone with thermally conductive ceramic reinforced by silicone film with high conductive ceramic • Colour: brown/ light grey • Temperature range: -60 to +180 °C • Hardness (Asker C): 30 • Volume resistivity: 0.8 x 1011 to 0.38 x 1011 Ohm x m • Thermal conductivity: 2.5 W/mK • Heat transfer resistance: see table • Flammability rating: UL 94 V-0

Technical specification

• Material: silicone, fibreglass reinforced • Colour: salmon • Temperature range: -60 to +200 °C • Filler: thermally conductive ceramic • Tensile strength: see table • Tear resistance: see table • Hardness (Asker C): 90 • Dielectric constant: 3.8 - 4.3 at 1 kHz • Volume resistivity: 1.8 x 1012 to 1.0 x 1012 Ohm x m • Thermal conductivity: 1.9 W/mK • Heat transfer resistance: see table • Flammability rating: UL 94 V-0

​

​

Item

Item ​ 339567 339568

Thick- Tensile Tear ness strength resist. mm MPa kN/m 0.2 0.2

25.9 25.9

70 70

Heat tr. resist.1 ​ 0.3 0.3

Dimensions

Price

mm

EURO

320 x 1,000 186.00 320 x 250 88.00

Thickness

Tensile strength

​

mm

MPa

339575 339576 339577 339578 339579 339580 339581 339582

0.5 0.5 1 1 2 2 3 3

0.55 0.55 0.4 0.4 0.3 0.3 0.29 0.29

1

Heat Dimensions Price transfer 1 resistance ​ mm EURO 0.37 0.37 0.66 0.66 0.93 0.93 1.3 1.3

300 x 400 150 x 200 300 x 400 150 x 200 300 x 400 150 x 200 300 x 400 150 x 200

206.00 98.00 284.00 128.00 336.00 148.00 474.00 202.00

inch2 x °C/W

THOMAPLAST® II - 2015 15

Semi-Finished Products - Elastomers

Foils (0.002 - 2.0 mm)

THOMAPLAST®-Soft-Silicone Film, Thermally Conductive (1.4 W/mK) - self-adhesive on both sides

THOMAPLAST®-Thermo-Silicone Cap (1.5 W/mK)

Application area

• High thermal conductivity • Very low total thermal transfer resistance • Safe and complete electric insulation • High dielectric strength • High flexibility • Quick and clean handling, superior process reliability

• SMD power modules, electrolytic capacitors, thermo sensors, highpower diodes, heat pipes, CD-ROM cooling, CPU modules, charging devices, UPS, SMPS, motor control units and cooling systems

Product specification

• Good thermal conductivity • Excellent dielectric strength • Self-adhesive on both sides • Available in a large thickness range

Product specification

Technical specification

• Material: silicone (silicone rubber) • Colour: salmon • Temperature range: -60 to +200 °C • Filler: thermally conductive ceramic • Tensile strength: 3.2 MPa • Tearing strength: 10.0 kN/m • Volume resistivity: 3.2 x 1012 Ohm x m • Dielectric constant: 6.0 at 1 kHz • Thermal conductivity: 1.5 W/mK • Flammability rating: UL 94 V-0

Technical specification

• Material: soft silicone with thermally conductive ceramic • Colour: salmon • Temperature range: -60 to +180 °C • Tensile strength: 0.35 MPa • Hardness (Asker C): 25 • Volume resistivity: 1.4 x 1012 Ohm x m • Thermal conductivity: 1.4 W/mK • Flammability rating: UL 94 V-0

​

​

Item Item ​

mm

Heat transfer resistance1 ​

339599 339600 339601 339602 339603 339604 339605 339606 339607 339608 339609 339610

0.5 0.5 1 1 2 2 3 3 4 4 5 5

0.75 0.75 1.2 1.2 1.75 1.75 2.46 2.46 2.92 2.92 3.35 3.35

1

Thickness

Dimensions

Price

mm

EURO

300 x 400 150 x 200 300 x 400 150 x 200 300 x 400 150 x 200 300 x 400 150 x 200 300 x 400 150 x 200 300 x 400 150 x 200

136.00 68.00 198.00 92.00 230.00 106.00 287.00 128.00 364.00 160.00 428.00 182.00

inch2 x °C/W

THOMAPLAST®-Thermo-Silicone Caps Application area

• Complete electric insulation of electronic components • Protection from electrical voltage breakdowns • Reduction of total thermal transfer resistance to cooling elements or casings • Power semiconductors and power modules in power supply units • Electronic drives, motor control units • Telecommunications modules • Frequency converters, UPS (uninterrupted power supply)

​

16 THOMAPLAST® II - 2015

​

Thickness mm

339611 0.3 339612 0.45 339615 0.3 339616 0.45 1

Heat Length Width Height Unit Price transfer 1 resistance ​ mm mm mm piece EURO 0.3 0.42 0.3 0.42

5.8 5.8 5.8 5.8

11.4 11.4 17.5 17.5

21.5 21.5 28.5 28.5

25 25 25 25

66.00 78.00 78.00 82.00

inch2 x °C/W

THOMAPLAST®-Thermo-Silicone Cap (1.1 W/mK) Product specification

• Good thermal conductivity • Low total thermal transfer resistance • Safe and complete electric insulation • Excellent dielectric strength • High flexibility • Quick and clean handling, superior process reliability

Technical specification

• Material: silicone (silicone rubber) • Colour: grey • Temperature range: -60 to +200 °C • Filler: thermally conductive ceramic • Tensile strength: 5.7 MPa • Tearing strength: 8.0 kN/m • Volume resistivity: 1.0 x 1012 Ohm x m • Dielectric constant: 4.8 at 1 kHz • Thermal conductivity: 1.1 W/mK • Flammability rating: UL 94 V-0 ​

Semi-Finished Products - Plastics

Foils (0.002 - 2.0 mm)

THOMAFOIL-ECTFE Film Product specification

• Good UV resistance • Good resistance to greases and oils, alcohols, aromatic hydrocarbons, alkalis, and acids; not resistant to halogenes

Technical specification

Item ​

Thickness mm

Heat Length Width Height Unit Price transfer resistance1 ​ mm mm mm piece EURO

339613 0.3 339614 0.45 339617 0.3 339618 0.45 1

0.53 0.74 0.53 0.74

5.8 5.8 5.8 5.8

11.4 11.4 17.5 17.5

21.5 21.5 28.5 28.5

25 25 25 25

50.00 60.00 60.00 62.00

• Material: ECTFE (ethylene-chlorofluoroethylene copolymer) • Temperature range: -75 to +150 °C • Density: 1.68 g/cm3 • Dielectric constant: 2.3 - 2.5 at 1 MHz • Dielectric strength: approx. 200 kV/mm • Surface resistivity: >1014 Ohm/cm2 • Permeability for carbon-dioxide: 6.6 x 10-11 cm2 x s-1/cm Hg • Permeability for oxygen: 1.5 x 10-11 cm2 x s-1/cm Hg • Water absorption: <0.02 % in 24 h ​

inch2 x °C/W

Plastics THOMAFOIL-CA Film Product specification

• Good UV resistance • Good resistance to fats and oils, halogenes, aromatic hydrocarbons, not stable to acids, alkalis, alcohols

Item ​ 48890 48891 48892

Technical specification

• Material: CA (cellulose acetate) • Density: 1.3 g/cm3 • Dielectric constant: approx. 5 at 1 MHz • Temperature range: -20 to +50 °C, for a short time +95 °C • Permeability: for carbon-dioxide: 5.5 x 10-10 cm2 x s-1/cm Hg for oxygen: 7 x 10-11 cm2 x s-1/cm Hg • Water absorption: 1.9 - 7 % after 24 h

Thickness mm

Weight g

0.025 0.025 0.025

3.8 15.1 34

Dimensions Unit mm piece 300 x 300 600 x 600 900 x 900

1 1 1

Price EURO 108.00 223.00 438.00

THOMAPLAST®-High-Tech FEP Film Product specification

• Excellent resistance to weather and UV radiation • Very well suited for heat sealing • Heat formable and sealable • Can be laminated with other materials • High chemical resistance • Good mechanical properties from low to high temperature range • High dielectric strength and high insulating resistance • Low dielectric loss factor • Low-friction, not wettable surface

​

Technical specification

Item ​ 48994 48995 48996 48997 48998 48999

Thickness mm

Weight g

0.075 0.075 0.075 0.5 0.5 0.5

2.19 8.77 11.3 6.5 14.6 39

Dimensions Unit mm piece 150 x 150 300 x 300 500 x 500 100 x 100 150 x 150 200 x 300

10 5 1 1 1 1

Price EURO 141.00 100.00 70.00 64.00 77.00 121.00

• Material: FEP (fluorinated ethylene-propylene) • Temperature range: -200 to +250 °C (without loading) • Specific weight: 2.12 - 2.17 • Tearing strength: 21 MPa • Elongation at break: 250 - 300 % • Coefficient of sliding friction against steel (dry): 0.06 - 0.09 • Specific heat: 1,172 J/kg x K • Coefficient of thermal conductivity: 0.195 W/m x K thermal linear expansion: ≈10-4/°C • Flammability rating: UL 94 V-0 • Dielectric strength: 240 kV/mm • Dielectric constant: 2.1 (at 1 kHz, RT) • Dielectric loss factor: 0.0003 (at 1 kHz, RT) • Water absorption: <0.01 % ​

THOMAPLAST® II - 2015 17

Semi-Finished Products - Plastics

Foils (0.002 - 2.0 mm)

THOMAFOIL-PA Film (PA 46) Product specification

• Low UV resistance • Good resistance to alcohols, aromatic hydrocarbons, fats and oils; not stable to strong acids

Technical specification

Item ​

Thickness mm

Dimensions mm

Price EURO

0.025 0.05 0.25 0.025 0.05 0.25

150 x 1,000 150 x 1,000 150 x 1,000 300 x 1,000 300 x 1,000 300 x 1,000

32.00 40.00 117.00 44.00 59.00 212.00

302459 302460 302462 302463 302464 302466

THOMAFOIL-PA Film (PA 6)

• Material: PA 46 (polyamide 46) • Density: 1.18 g/cm3 • Temperature range: -40 to +135 °C • Dielectric constant: 3.8 - 4.3 at 1 MHz • Surface resistivity: >1012 Ohm/cm2 • Water absorption: 1.3 % in 24 h ​

Item ​ 48897 48898

Thickness Weight Dimensions Unit Price Price mm g mm piece EURO EURO 0.25 0.25

3 6.7

100 x 100 150 x 150

1 1

62.00 62.00 93.00 93.00

THOMAFOIL-PC Film Product specification

Product specification

• Low UV resistance • Good resistance to aromatic hydrocarbons, halogenes, ketones, fats and oils, and diluted acids; not stable to alcohols, alkalis and conc. acids

Technical specification

• Material: PA 6 (polyamide 6) • Density: 1.13 g/cm3 • Temperature range: -40 to +100 °C, for a short time +160 °C • Dielectric constant: 3.6 at 1 MHz • Dielectric strength: 2.7 kV/mm • Surface resistivity: 5 x 1010 Ohm/cm2 • Permeability: for carbon-dioxide: 2 x 10-9 cm2 x s-1/cm Hg for oxygen: 6 x 10-12 cm2 x s-1/cm Hg • Water absorption: 2.7 % in 24 h

• Low UV resistance • Good resistance to alcohols, fats and oils, diluted acids, not stable to aromatic hydrocarbons, ketones, alkalis, conc. acids

Technical specification

• Material: PC (polycarbonate) • Density: 1.2 g/cm3 • Temperature range: -50 to +125 °C • Dielectric constant: 2.9 - 3.1 at 1 MHz • Dielectric strength: 252 kV/mm • Permeability: for carbon-dioxide: 6.5 x 10-10 cm2 x s-1/cm Hg for oxygen: 1.8 x 10-10 cm2 x s-1/cm Hg • Water absorption: 0.15 - 0.35 % in 24 h ​

Item ​

​

48906 48907 48908 48909 48910

Thickness mm

Weight g

0.002 0.002 0.02 0.02 0.02

0.054 0.216 0.24 0.54 2.2

Dimensions Unit mm piece 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300

1 1 1 1 1

Price EURO 116.00 136.00 82.00 105.00 202.00

THOMAFOIL-PC Film - metallized Product specification Item ​ 48899 48900 48901 48902 48904 48905

Thickness mm

Weight g

0.05 0.05 0.05 0.05 0.25 0.25

0.565 1.3 5.1 20.3 2.8 6.4

18 THOMAPLAST® II - 2015

Dimensions Unit mm piece 100 x 100 150 x 150 300 x 300 600 x 600 100 x 100 150 x 150

5 5 5 5 5 5

Price EURO 95.00 108.00 141.00 149.00 62.00 72.00

• Low UV resistance • Good resistance to alcohols, fats and oils, diluted acids, not stable to aromatic hydrocarbons, ketones, alkalis, conc. acids ​

Semi-Finished Products - Plastics

Foils (0.002 - 2.0 mm)

Technical specification

Item ​

• Material: PC (polycarbonate), Al-metallized • Density: 1.2 g/cm3 • Temperature range: -50 to +125 °C • Surface resistivity: 102 Ohm/cm2 Item ​ 48911 48912 48913

Thickness mm

Weight g

0.002 0.002 0.002

0.027 0.065 0.13

Dimensions Unit mm piece 100 x 100 150 x 160 160 x 300

1 1 1

48924 48926 48925 48930 48931 48932 48927 48928 48929

Price EURO 181.00 200.00 223.00

THOMAFOIL-PE Film - graphite-filled

Thickness mm

Weight g

0.075 0.075 0.075 0.1 0.1 0.1 0.25 0.25 0.25

0.968 8.7 2.2 1.3 2.8 9.5 3.2 7.3 24.7

Dimensions Unit mm piece 100 x 100 300 x 300 150 x 150 100 x 100 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300

1 1 1 1 1 1 1 1 1

Price EURO 67.00 133.00 82.00 59.00 72.00 108.00 82.00 110.00 292.00

THOMAFOIL-PES Film

Product specification

• Good UV resistance • Good resistance to alcohols, diluted acids, unstable to conc. acids, ketones, aromatic hydrocarbons

Technical specification

• Material: PE (polyethylene) with graphite fill, electrically conductive • Density: 0.96 g/cm3 • Surface resistivity: 103 - 104 Ohm/cm2 • Volume resistivity: <105 Ohm/cm3 ​

Product specification

• Moderate UV resistance • Good resistance to alcohols, halogenes, fats and oils, acids, alkalis, not stable to conc. acids, ketones, aromatic hydrocarbons

Technical specification

• Material: PES (polyether-sulfone) • Colour: amber • Density: 1.37 g/cm3 • Temperature range: -100 to +190 °C, for a short time +220 °C • Dielectric strength: 232 kV/mm • Permeability: for carbon-dioxide: 2.4 x 10-10 cm2 x s-1/cm Hg for oxygen: 5.4 x 10-11 cm2 x s-1/cm Hg • Water absorption: 0.4 - 2.0 % in 24 h

​

Item ​

Item ​ 48942 48943 48944 48945

Thickness mm

Weight g

0.08 0.08 0.08 0.08

0.768 1.7 6.9 19.2

Dimensions Unit mm piece 100 x 100 150 x 150 300 x 300 500 x 500

1 1 1 1

Price EURO 36.00 44.00 64.00 105.00

THOMAFOIL-PEEK Film Product specification

• Moderate UV resistance • Good resistance to alcohols, aromatic hydrocarbons, halogenes, ketones, fats and oils, alkalis and acids; not stable to oxydizing acids

Technical specification

• Material: PEEK (polyether-etherketone) • Temperature range: -50 to +250 °C • Density: 1.32 g/cm3 • Dielectric strength: 110 kV/mm • Permeability for oxygen: 1.1 x 10-11 cm2 x s-1/cm Hg • Water absorption: 0.1 - 0.3 % in 24 h

48939 48940 48941

Thickness mm

Weight g

0.25 0.25 0.25

3.4 7.7 30.8

Dimensions Unit mm piece 100 x 100 150 x 150 300 x 300

1 1 1

Price EURO 112.00 158.00 261.00

THOMAFOIL-PETP Film Product specification

• Heavy duty film • Very low creeping tendency • Very good dimensional stability • Very wear-resistant, not resistant to hydrolysis • Good temperature resistance • Good resistance to UV-radiation and weather • Good mechanical stability, best stiffness and hardness • Good coefficient of sliding friction • Good abrasion resistance • Self-extinguishing • Unstable to halogenated solutions as well as conc. alkalis and mineral acids • Sensitive to steam and hot water • Hazard indication: PETP is physiologically safe, but particles of this extremely thin film adhere to the skin and can cause irritations.

Therefore, inhaling of film particles has absolutely to be avoided. The eyes have to be protected while working with the film.

​

Item ​ 48920 48921

Thickness mm

Weight g

0.025 0.025

0.726 2.9

Dimensions Unit mm piece 150 x 150 300 x 300

1 1

Price EURO 70.00 105.00

Technical specification

• Material: PETP (polyethylene-terephthalate) • Design: C-type film • Density: 1.39 g/cm3 (DIN 53479) • Temperature range: -20 to +110 °C, for a short time +160 °C • Dielectric strength: ≈60 kV/mm ​

THOMAPLAST® II - 2015 19

Semi-Finished Products - Plastics Item ​ 18542 18543 18552 18544 18545 18546 18547 18548 18549 18550 18551 18553 18554 18555 18556

Foils (0.002 - 2.0 mm)

Thickness Dimensions Width Length Unit mm mm mm m piece 0.005 0.005 0.023 0.008 0.008 0.008 0.008 0.012 0.012 0.012 0.012 0.023 0.023 0.023 0.023

150 x 150 300 x 300 100 x 150 ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​

​ ​ ​ 152 152 152 152 152 152 152 152 152 152 152 152

​ ​ ​ 1 5 20 100 1 5 20 100 1 5 20 100

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 151.00 266.00 139.00 202.00 284.00 504.00 1,562.00 156.00 254.00 356.00 1,176.00 202.00 289.00 422.00 990.00

Item ​ 48968 48969 48970 48971 48972 48973 48974 48975 48976 48977

THOMAFOIL-PI Film Product specification

Thickness mm

Weight g

0.004 0.004 0.004 0.01 0.01 0.01 0.04 0.04 0.04 0.04

0.036 0.815 0.326 0.09 0.204 0.815 0.36 0.8 3.24 12.9

• Good UV resistance • Good beta and gamma radiation resistance • Good resistance to alcohols, aromatic hydrocarbons, halogenes, ketones, fats and oils, conc. acids; not stable to alkalis

THOMAFOIL-PTFE Film

Technical specification

Product specification

• Material: PI (polyimide) • Temperature range: -270 to +250 °C, for a short time +320 °C • Density: 1.42 g/cm3 • Dielectric strength: 280 kV/mm • Permeability: for carbon-dioxide: 2.7 x 10-11 cm2 x s-1/cm Hg for oxygen: 1.5 x 10-11 cm2 x s-1/cm Hg • Water absorption: 0.2 - 2.9 % in 24 h

48955 48956 48957 48958 48959 48960 48961 48962 48963

Thickness mm

Weight g

0.008 0.008 0.008 0.05 0.05 0.05 0.125 0.125 0.125

0.114 0.256 1.02 0.71 1.6 6.4 1.8 4 16

Dimensions Unit mm piece 100 x 100 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300

1 1 1 1 1 1 1 1 1

Price EURO 110.00 315.00 484.00 70.00 93.00 238.00 77.00 90.00 162.00

• Moderate UV resistance • Good resistance to alcohols, ketones, conc. acids, alkalis, not stable to aromatic hydrocarbons, fats and oils, halogenes

Technical specification

• Material: PP (polypropylene) • Density: 0.9 g/cm3 • Temperature range: -60 to +100 °C, for a short time +120 °C • Water absorption: <0.05 % in 24 h • Dielectric constant: 2.2 - 2.6 at 1 MHz • Surface resistivity: 1013 Ohm/cm2 ​

20 THOMAPLAST® II - 2015

1 1 1 1 1 1 1 1 1 1

106.00 118.00 152.00 72.00 84.00 92.00 70.00 72.00 82.00 124.00

Technical specification

THOMAFOIL-PP Film Product specification

100 x 100 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300 600 x 600

Price EURO

• Good UV resistance • Good resistance to greases and oils, alcohols, halogenes, aromatic hydrocarbons, ketones, alkalis, acids

​

Item ​

Dimensions Unit mm piece

• Material: PTFE (polytetrafluoroethylene) • Temperature range: -260 to +260 °C • Density: 2.2 g/cm3 • Dielectric constant: 2.1 at 1 MHz • Water absorption: 0.1 % after 24 h ​

Item ​ 49000 49001 49002 49003 49004 49005 49006 49007 49008

Thickness mm

Weight g

0.01 0.01 0.01 0.05 0.05 0.05 0.1 0.1 0.1

0.218 0.49 2 1.1 2.5 9.8 2.2 4.9 19.6

Dimensions Unit mm piece 100 x 100 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300 100 x 100 150 x 150 300 x 300

1 1 1 1 1 1 1 1 1

Price EURO 64.00 82.00 123.00 34.00 47.00 70.00 41.00 52.00 70.00

THOMAPLAST®-PTFE Film (virgin) Product specification

• Excellent resistance to weather and UV radiation • Sliced from pressure / high-temperature sintered PTFE powder • Good mechanical properties from low to high temperature range • Lowest surface friction value of all solids • Outstanding sliding properties, highest chemical resistance • Antiadhesive and not wettable • Low permeability, silencing and vibration-damping • Good dielectric strength

Semi-Finished Products - Plastics

Foils (0.002 - 2.0 mm)

Technical specification

Item ​

• Material: virgin PTFE (polytetrafluoroethylene) • Colour: opal white • Temperature range: -260 to +260 °C • Shore hardness D: 54° (DIN 53505) • Specific weight: 2.17 (DIN 53479) • Tearing strength: 28.5 N/mm2 (DIN 53455) • Elongation at break: 300 % (DIN 53455) • Ball pressure strength: 22.6 N/mm2 (DIN 53456) • Dielectric strength: 50 kV/mm (DIN 53481)

18175 18176 18177 18179 18185 18186 18187 18188 18190 18196 18197 18198 18199

​

Thickness mm

Width mm

Length m

Unit piece

0.5 0.5 0.5 0.5 1 1 1 1 1 2 2 2 2

1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200

3 5 10 20 1 3 5 10 20 1 3 5 10

1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 714.00 865.00 1,297.00 1,729.00 433.00 1,038.00 1,297.00 1,729.00 2,593.00 780.00 1,816.00 2,161.00 3,457.00

THOMAPLAST®-High-Tech PTFE Film (virgin) conforming to FDA Item ​ 18097 18098 18099 18100 18102 18108 18109 18110 18111 18113 18119 18120 18121 18122 18124 18130 18131 18132 18133 18135 18141 18142 18143 18144 18146 18152 18153 18154 18155 18157 18163 18164 18165 18166 18168 18174

Thickness mm

Width mm

Length m

Unit piece

0.1 0.1 0.1 0.1 0.1 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5 1 1 1 1 1 2 2 2 2 2 0.1 0.1 0.1 0.1 0.1 0.25 0.25 0.25 0.25 0.25 0.5

600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200

1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 54.00 136.00 192.00 310.00 476.00 95.00 233.00 300.00 479.00 714.00 182.00 430.00 540.00 834.00 1,292.00 310.00 785.00 952.00 1,427.00 1,903.00 476.00 1,143.00 1,427.00 1,903.00 2,854.00 95.00 208.00 305.00 522.00 783.00 151.00 356.00 430.00 645.00 859.00 302.00

Application area

• As table pad, for lining drawers, as slideway or for insulation.

Product specification

• PTFE sheets in practice-oriented thicknesses of 0.05 mm and 1.5 mm; length 1,000 mm each, width 300 or 600 mm. Electrically nonconductive, non-porous smooth surface, water-repellent, chemicalresistant, free of leachable components, biocompatible; temperatureresistant, sterilizable with all commonly used methods.

Technical specification

• Material: virgin PTFE (polytetrafluoroethylene) • Colour: opal white • Temperature range: -200 to +260 °C • Shore hardness D: 54° (DIN 53465) ​

Item ​ 47948 47949 47950 47951 47952 47953 47954 47955 47956 47957 47958 47959

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.05 0.12 0.25 0.5 0.75 1 1.5 0.05 0.12 0.25 0.5 0.75

300 x 1,000 300 x 1,000 300 x 1,000 300 x 1,000 300 x 1,000 300 x 1,000 300 x 1,000 600 x 1,000 600 x 1,000 600 x 1,000 600 x 1,000 600 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1

29.00 33.00 52.00 78.00 118.00 138.00 178.00 47.00 51.00 78.00 126.00 180.00

THOMAPLAST® II - 2015 21

Semi-Finished Products - Plastics Item ​ 47960 47961

Foils (0.002 - 2.0 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5

600 x 1,000 600 x 1,000

1 1

229.00 262.00

Item ​ 18231 18232 18234 18240 18241 18242 18243 18245 18251 18252 18253 18254 18256 18262 18263 18264 18265 18267 18273 18274 18275 18276 18278 18284 18285 18286 18287 18289 18295 18296 18297 18298 18300 18306 18307 18308 18309 18311

THOMAPLAST®-PTFE Film (virgin) - etched on one side Product specification

• Excellent resistance to weather and UV radiation • Sliced from pressure / high-temperature sintered PTFE powder • One side etched, the other side left unchanged • Etched side bondable and suitable for lamination • Good mechanical properties from low to high temperature range • Lowest surface friction value of all solids on the unchanged side • Outstanding sliding properties of the unchanged side • Highest chemical resistance • Unchanged side antiadhesive and not wettable • Low permeability • Silencing and vibration-damping • Good dielectric strength • Width optionally 600 or 1,200 mm • Thickness optionally 0.1 mm, 0.25 mm, 0.5 mm, 1.0 mm or 2.0 mm

Technical specification

• Material: virgin PTFE (polytetrafluoroethylene) • Colour: unchanged side: light grey etched side: russet (etched with ammonia-sodium) • Temperature range: -260 to +260 °C • Shore hardness D: 54° (DIN 53465) • Specific weight: 2.17 (DIN 53479) • Tearing strength: 28.5 N/mm2 (DIN 53455) • Elongation at break: 300 % (DIN 53455) • Ball pressure strength: 22.6 N/mm2 (DIN 53456) • Dielectric strength: 50 kV/mm (DIN 53481) • Design: etched on one side ​

Thickness mm

Width mm

Length m

Unit piece

0.5 0.5 0.5 1 1 1 1 1 2 2 2 2 2 0.1 0.1 0.1 0.1 0.1 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5 1 1 1 1 1 2 2 2 2 2

600 600 600 600 600 600 600 600 600 600 600 600 600 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200

5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 683.00 1,031.00 1,368.00 341.00 821.00 1,026.00 1,368.00 2,051.00 555.00 1,230.00 1,496.00 2,056.00 4,081.00 113.00 264.00 376.00 499.00 872.00 187.00 466.00 622.00 934.00 1,248.00 312.00 750.00 931.00 1,248.00 1,872.00 499.00 1,118.00 1,366.00 1,856.00 3,712.00 747.00 1,678.00 2,485.00 3,728.00 6,213.00

THOMAPLAST®-PTFE Film (virgin) etched on one side, square Item ​ 18207 18208 18209 18210 18212 18218 18219 18220 18221 18223 18229 18230

Thickness mm

Width mm

Length m

Unit piece

0.1 0.1 0.1 0.1 0.1 0.25 0.25 0.25 0.25 0.25 0.5 0.5

600 600 600 600 600 600 600 600 600 600 600 600

1 3 5 10 20 1 3 5 10 20 1 3

1 1 1 1 1 1 1 1 1 1 1 1

22 THOMAPLAST® II - 2015

Price EURO 62.00 156.00 223.00 310.00 555.00 136.00 335.00 427.00 686.00 1,028.00 223.00 565.00

Product specification

• Handling hint: For direct bonding with other materials; no need for pretreatment (etching) of the sheet with active sodium solution.

Technical specification

• Material: virgin PTFE (polytetrafluoroethylene) • Colour: unchanged side: light grey etched side: russet • Temperature range: -260 to +260 °C • Shore hardness D: 54° (DIN 53465) • Design: etched on one side ​

Semi-Finished Products - Plastics Item ​

Foils (0.002 - 2.0 mm)

Thickness mm

Dimensions mm

Unit piece

0.1 0.2 0.5 1 1.5 2 2.5 3 0.5 1 1.5 2 2.5 3

600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,200 x 1,200 1,200 x 1,200 1,000 x 1,000 1,000 x 1,000 1,200 x 1,200 1,200 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1

300160 300161 300162 300163 300164 300165 300166 300167 300168 300169 300170 300171 300172 300173

Price EURO 75.00 79.00 106.00 170.00 219.00 273.00 294.00 313.00 298.00 467.00 701.00 833.00 1,022.00 1,039.00

Item ​

Width Thick- Tensile ness strength mm mm N/cm

17846 17847 178492 17860 17861 17862 17863 178652 17868 17869 17870 17871 178732 17876 17877 17878 17879 178812 17892 17893 17894 17895 178972 17900 17901 17902 17903 179052

500 500 500 500 500 500 500 500 500 500 500 500 500 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

THOMAPLAST®-PTFE Film (virgin) self-adhesive on one side Product specification

• Made of sliced PTFE and coated with silicone adhesive • Excellent electrical properties • Strongly anti-adhesive surface • Good chemical resistance • High abrasion resistance • Low friction, outstanding resistance to heat • Outstanding matching to uneven surfaces • Physical-chemical properties: Due to its physical-chemical properties outstandingly suitable for lining of containers and conveying systems in the areas of chemistry, mechanical engineering and vehicle building. Very well suited for curved surfaces occurring for instance in mould making. Due to special antiadhesive properties easy mould release with sticky materials such as PUR, epoxy, and phenolic resin.

Technical specification

1

0.13 0.13 0.13 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5 0.13 0.13 0.13 0.13 0.13 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5

at 90° peel resistance

53 53 53 96 96 96 96 96 184 184 184 184 184 53 53 53 53 53 96 96 96 96 96 184 184 184 184 184 2

Adhesive Length strength1 N/cm m 5.6 5.6 5.6 5.9 5.9 5.9 5.9 5.9 6.8 6.8 6.8 6.8 6.8 5.6 5.6 5.6 5.6 5.6 5.9 5.9 5.9 5.9 5.9 6.8 6.8 6.8 6.8 6.8

5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20

Price EURO 276.00 442.00 694.00 125.00 338.00 438.00 701.00 1,102.00 206.00 555.00 720.00 1,151.00 1,808.00 158.00 426.00 552.00 883.00 1,387.00 251.00 676.00 877.00 1,402.00 2,203.00 411.00 1,110.00 1,439.00 2,302.00 3,616.00

Delivered in 2 reels of 10 meter

THOMAFOIL-PVDF Film Product specification

• Material: PTFE (polytetrafluoroethylene) • Colour: grey • Adhesive: silicone (covered with corrugated yellow liner) • Adhesive layer: approx. 0.045 mm • Max. temperature: +150 °C • Elongation at break: at least 270 %, with thickness >0.25 mm up to 300 %

• Excellent UV resistance • Good beta and gamma radiation resistance • Good resistance to alcohols, fats and oils, halogenes, alkalis, acids; not stable to ketones, aromatic hydrocarbons

Technical specification

• Material: PVDF (polyvinylidene fluoride), piezoelectric • Temperature range: -40 to +160 °C, for a short time +220 °C • Density: 1.76 g/cm3 • Dielectric strength: 150 kV/mm • Dielectric constant: 8.4 at 1 MHz • Piezocoefficients: d31 biaxial 50 pC x N-1; d32 uniaxial 18; biaxial 8 pC x N-1; 33 uniaxial 2; biaxial 8 pC x N-1

​

​

Item ​

Item ​ 17844 17845

Width Thick- Tensile ness strength mm mm N/cm 500 500

0.13 0.13

53 53

Adhesive Length strength1 N/cm m 5.6 5.6

1 3

Price EURO 79.00 213.00

48978 48979 48980 48981 48982 48983 48984 48985

Thickness mm

Weight g

0.009 0.009 0.009 0.028 0.028 0.028 0.5 0.5

0.01 0.04 0.158 0.028 0.11 0.44 8.8 19.8

Dimensions Unit mm piece 25 x 25 50 x 50 100 x 100 50 x 50 100 x 100 200 x 200 100 x 100 150 x 150

1 1 1 1 1 1 1 1

Price EURO 151.00 284.00 435.00 128.00 318.00 445.00 113.00 121.00

THOMAPLAST® II - 2015 23

Semi-Finished Products - Plastics Item ​ 48986 48987

Thickness mm

Weight g

0.5 0.5

72.5 220

Foils (0.002 - 2.0 mm)

Dimensions Unit mm piece 300 x 300 600 x 600

1 1

Price EURO 351.00 719.00

Glass Fabric THOMAPLAST®-Glass Fabric Film - aluminium-coated Application area

THOMAFOIL-PVDF Film - metallized

• Thermal insulating, heat shielding function

Product specification

Product specification

• Excellent UV resistance • Good beta and gamma radiation resistance • Good resistance to alcohols, fats and oils, halogenes, alkalis, acids; not stable to ketones, aromatic hydrocarbons

Technical specification

• Material: PVDF (polyvinylidene fluoride), Al-metallized on both sides, piezoelectric • Temperature range: -40 to +160 °C, for a short time +220 °C • Density: 1.76 g/cm3 • Dielectric constant: 8.4 at 1 MHz • Piezocoefficients: d31 biaxial 50 pC x N-1; d32 uniaxial 18; biaxial 8 pC x N-1; d33 uniaxial 2; biaxial 8 pC x N-1 • Surface resistivity: 102 Ohm/cm2

• Aluminium-coated on one side • Resistant to oils, fats, solvent and organic acids

Technical specification

• Material: glass fibre, made of EC 9 filament yarn, textured • Temperature range: -10 to +450 °C, for a short time +550 °C • Weight: approx. 1.07 kg/m2 ​

​

Item ​ 302295 302296

Item ​ 48991 48992 48993

Thickness mm

Weight g

0.025 0.025 0.025

0.11 0.441 0.993

Dimensions Unit mm piece 50 x 50 100 x 100 150 x 150

1 1 1

Price EURO 462.00 784.00 1,589.00

Product specification

• Moderate UV resistance • Good resistance to alcohols, halogens, fats and oils, ketones, conc. acids, alkalis

Technical specification

• Material: TPX (polymethylpentene) • Density: 0.835 g/cm3 • Temperature range: 0 to +115 °C • Water absorption: 0.1 % in 24 h

48966 48967

Weight g

0.5 0.5

9.4 37.6

24 THOMAPLAST® II - 2015

Unit piece

Price EURO

1.6 1.6

500 x 500 1,000 x 1,000

1 1

94.00 200.00

THOMAPLAST®-Glass Fabric Film - silicone-coated Application area

• Insulation of solenoids • Layer insulation in motor and transformer production • Insulating foil in chemical engineering, laboratory technology, electrical engineering and machine building • High diagonal flexibility and lower elongation in machine direction, thus wide application spectrum.

• Very close meshed and extremely fine yarn structure.

• Coated with silicone rubber under pressure on both sides, so that the silicone permeates the meshes of the fabric thus ensuring a strong bonding.

• Wide temperature spectrum in the positive and negative range • Remarkable tearing strength • Easy to cut • Very good adhesive repellent properties ​

​

Thickness mm

Dimensions mm

Product specification

THOMAFOIL-TPX Film

Item ​

Thickness mm

Dimensions Unit mm piece 150 x 150 300 x 300

1 1

Price EURO 100.00 192.00

Semi-Finished Products - Glass Fabric

Foils (0.002 - 2.0 mm)

Technical specification

• Material: glass silk, silicone-coated • Colour: yellow • Temperature range: -60 to +200 °C • Thermal class: H (+180 °C) • Water absorption after 24 h water bath: 1.0 - 3.8 % • Specific weight: 1.3 - 1.6 • Dielectric strength: 14 - 40 kV/mm at +20 °C 17 - 43 kV/mm at +180 °C • Volume resistivity: 1013 Ohm cm at +20 to +180 °C • Dielectric constant: 4.5 - 4.9 at 800 Hz / +20 °C 3.9 - 4.3 at 800 Hz / +180 °C • Loss factor: 0.013 - 0.025 at 800 Hz / +20 °C 0.010 - 0.018 at 800 Hz / +180 °C • Tearing strength: 40 - 120 N/cm2 (depending on thickness) Item ​ 331686 331687 331688 331689 331690 331691 331692 331693 331694

Item ​

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.125 0.125 0.125 0.15 0.15 0.15 0.254 0.254 0.254

500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1

82.00 126.00 212.00 110.00 184.00 292.00 144.00 242.00 382.00

THOMAPLAST®-Glass Fabric Film - PTFE-Bonded Product specification

• PTFE-bonded rough-cast glass silk fabric • Outstanding electrical insulating properties • Outstanding chemical resistance • High abrasion resistance and durability • High antiadhesion • Low friction coefficient • Outstanding thermal resistance • Low thermal expansion • Physiologically safe • Resistant to weather, UV-radiation, and aging • Physical-chemical features: Combines the chemical material properties of PTFE with the extraordinary strength of highly tension-proof glass cloth.

Due to its extraordinary electrical insulating and dielectric properties together with excellent mechanical stability, the material is best suited for heavy-duty insulations, aerial covers, and cable sheating.

Its physiological safety, antiadhesiveness, and temperature resistance make PTFE-bonded glass cloth an ideal processing aid in the food processing and semi-luxuries industry.

Technical specification

• Material: PTFE (polytetrafluoroethylene) combined with rough-cast glass silk fabric • Colour: light-beige to medium brown, special quality ”antistatic”, black • Temperature range: -150 to +260 °C • Special features: high tearing strength, antistatic design with surface resistivity 106 Ohm • Certification: permanent quality according to ISO 9001 ​

17996 17997 17998 17999 18001 18004 18005 18006 18007 18009 18012 18013 18014 18015 18017 18020 18021 18022 18023 18025 18028 18029 18030 18031 18033

Width Thick- Design Tensile Tear Length ness strength resist. mm mm ​ N/cm N m 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500

0.07 0.07 0.07 0.07 0.07 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.15 0.15 0.15 0.15 0.15 0.225 0.225 0.225 0.225 0.225

18036 500

0.35

18037 500

0.35

18038 500

0.35

18039 500

0.35

18041 500

0.35

18044 18045 18046 18047 18048 18051 18052 18053 18054 18056

0.07 0.07 0.07 0.07 0.07 0.12 0.12 0.12 0.12 0.12

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

smooth smooth smooth smooth smooth smooth smooth smooth smooth smooth smooth smooth smooth smooth smooth antistatic antistatic antistatic antistatic antistatic smooth smooth smooth smooth smooth tearingresistant tearingresistant tearingresistant tearingresistant tearingresistant smooth smooth smooth smooth smooth smooth smooth smooth smooth smooth

Price EURO

180 180 180 180 180 290 290 290 290 290 310 310 310 310 310 300 300 300 300 300 520 520 520 520 520

13 13 13 13 13 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 40 40 40 40 40

1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20

54.00 116.00 159.00 228.00 325.00 59.00 141.00 195.00 274.00 392.00 70.00 169.00 233.00 328.00 468.00 105.00 233.00 305.00 435.00 696.00 85.00 197.00 259.00 399.00 655.00

660

​

1

116.00

660

​

3

277.00

660

​

5

356.00

660

​

10

481.00

660

​

20

811.00

180 180 180 180 180 290 290 290 290 290

13 13 13 13 13 20 20 20 20 20

1 3 5 10 20 1 3 5 10 20

77.00 177.00 236.00 353.00 588.00 95.00 215.00 284.00 427.00 711.00

THOMAPLAST® II - 2015 25

Semi-Finished Products - Glass Fabric Item

Foils (0.002 - 2.0 mm)

​

Width Thick- Design Tensile Tear Length ness strength resist. mm mm ​ N/cm N m

18059 18060 18061 18062 18064 18067 18068 18069 18070 18072 18075 18076 18077 18078 18080

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

0.14 0.14 0.14 0.14 0.14 0.15 0.15 0.15 0.15 0.15 0.225 0.225 0.225 0.225 0.225

18083 1,000

0.35

18084 1,000

0.35

18085 1,000

0.35

18086 1,000

0.35

18088 1,000

0.35

smooth smooth smooth smooth smooth antistatic antistatic antistatic antistatic antistatic smooth smooth smooth smooth smooth tearingresistant tearingresistant tearingresistant tearingresistant tearingresistant

Price EURO

310 310 310 310 310 300 300 300 300 300 520 520 520 520 520

20 20 20 20 20 15 15 15 15 15 40 40 40 40 40

1 3 5 10 20 1 3 5 10 20 1 3 5 10 20

100.00 243.00 300.00 468.00 849.00 159.00 379.00 476.00 635.00 1,049.00 131.00 284.00 356.00 530.00 949.00

660

​

1

144.00

660

​

3

346.00

660

​

5

420.00

660

​

10

691.00

660

​

20

1,258.00

THOMAPLAST®-Glass Fabric Film PTFE-bonded, self-adhesive at one side Product specification

• Highly tension-proof glass cloth, bonded with high-temperatureresistant silicone adhesive • High dielectric strength • Outstanding chemical resistance • High abrasion resistance and durability • High tear resistance, high antiadhesion • Low friction • Outstanding thermal resistance • Outstanding matching to uneven surfaces • Low cold flow at pressure load • Permanent dimensional stability • Physical-chemical features: Combines the chemical material properties of PTFE with the extraordinary strength of highly tension-proof glass cloth.

Due to its high dielectric strength together with excellent mechanical stability, the material is best suited for heavy-duty insulations and cable sheating.

Outstanding suitability for lining of transport guide rails, chutes, and skids.

Due to high temperature stability also usable for packers such as heat sealing devices, blister-foil packers, and tubing bag welders.

Technical specification

• Material: PTFE (polytetrafluoroethylene) combined with glass cloth compound • Colour: yellow-brown • Adhesive layer: approx. 0.045 mm silicone (covered with wavy yellow liner) • Temperature range: -73 to +200 °C • Elongation at break: 5 % ​

26 THOMAPLAST® II - 2015

Item ​

Width Thick- Tensile Adhesive Length ness strength strength mm mm N/cm N/cm m

17908 17909 17910 17911 17913 17916 17917 17918 17919 17921 17924 17925 17926 17927 17929 17932 17933 17934 17935 17937 17940 17941 17942 17943 17945 17948 17949 17950 17951 17953 17956 17957 17958 17959 17961 17964 17965 17966 17967 17969

500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

0.07 0.07 0.07 0.07 0.07 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.225 0.225 0.225 0.225 0.225 0.07 0.07 0.07 0.07 0.07 0.12 0.12 0.12 0.12 0.12 0.135 0.135 0.135 0.135 0.135 0.225 0.225 0.225 0.225 0.225

180 180 180 180 180 290 290 290 290 290 310 310 310 310 310 520 520 520 520 520 180 180 180 180 180 290 290 290 290 290 290 290 290 290 290 520 520 520 520 520

5.3 5.3 5.3 5.3 5.3 6.2 6.2 6.2 6.2 6.2 6.4 6.4 6.4 6.4 6.4 7.5 7.5 7.5 7.5 7.5 5.3 5.3 5.3 5.3 5.3 6.2 6.2 6.2 6.2 6.2 6.4 6.4 6.4 6.4 6.4 7.5 7.5 7.5 7.5 7.5

1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20 1 3 5 10 20

Price EURO 105.00 261.00 335.00 537.00 806.00 123.00 300.00 381.00 617.00 913.00 131.00 320.00 402.00 655.00 982.00 156.00 376.00 468.00 729.00 1,041.00 172.00 402.00 484.00 732.00 975.00 195.00 440.00 525.00 770.00 1,256.00 202.00 466.00 555.00 816.00 1,335.00 228.00 509.00 617.00 852.00 1,442.00

Semi-Finished Products - Glass Fabric

Foils (0.002 - 2.0 mm)

THOMAPLAST®-High-Tech Glass Fabric Film PTFE Bonded, self-adhesive, cutting

THOMAPLAST®-High-Therm-Glass Fibre Fabric asbestos-free

Application area

Application area

• Self-adhesive, antiadhesive finish on foil welding devices, drying and coating cylinders, and drum dryers.

• Slip coating at chutes, funnels, guides, slide pipes at packaging machines.

• Self-adhesive insulation foil for electrical engineering, chemical and process engineering.

Product specification

• Extremely antiadhesive surface • Minimal coefficient of sliding friction • Extremely high temperature resistance • Extraordinary chemical resistance • High tensile strength and dimensional stability • Low thermal expansion • Good dielectric properties • Transmissive for microwaves and UV-light • Non-toxic • Resistant to mildew, bacteria, and mould

• Thermal insulating

Product specification

• Highest heat stability • Very high mechanical stability • Non-combustible • Good chemical resistance, very high to oils, fats, alkalis, organic acids and vapors

Technical specification

• Material: glass fibre, made of EC 9 filament yarn, textured • Special features: asbestos-free • Temperature range: -10 to +450 °C, for a short time +550 °C ​

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: brown • Design: PTFE-impregnated glass fabric, self-adhesive • Adhesive: silicone adhesive, adhesive layer covered with removable PVC-film • Adhesive layer: approx. 0.05 mm • Temperature range: -73 to +260 °C • Type: AP: Standard design. Colour brown. Cloth with surface finish suitable for most applications; good material combination of mechanical and antiadhesive properties.

AAP: Cloth with especially high PTFE content and particularly smooth surface. Colour brown.

Item ​ 302265 302266

Thickness mm

Dimensions mm

Unit piece

Price EURO

2 2

500 x 500 1,000 x 1,000

1 1

66.00 143.00

​

Metals THOMAFOIL-Aluminum Foil Product specification

• Absolutely gas- and steam-tight, physiologically safe, no restoring effect, adapting to all shapes, e.g. for closing of test tubes etc.

• For better heat insulation/heat distribution • As separation layer between insulation and heating • As separation layer for heating of plastic pipes Item ​ 301230 301231 301232 301236 301237 301238 301239 301240 301241 301242 301243 301244

Thickness mm

Type ​

0.073 0.073 0.073 0.122 0.122 0.122 0.152 0.152 0.152 0.235 0.235 0.235

AP AP AP AP AP AP AAP AAP AAP AP AP AP

Dimensions Unit mm piece 250 x 250 250 x 500 500 x 500 250 x 250 250 x 500 500 x 500 250 x 250 250 x 500 500 x 500 250 x 250 250 x 500 500 x 500

1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 62.00 93.00 144.00 70.00 90.00 154.00 75.00 98.00 162.00 108.00 141.00 208.00

Technical specification

• Material: aluminum • Max. temperature: +450 °C ​

THOMAPLAST® II - 2015 27

Semi-Finished Products - Metals Item ​ 301652 301653 301654 301655 70051 301656 70052 70053 301657 301658 301659 70054

Foils (0.002 - 2.0 mm)

Thickness mm

Width mm

Length m

Unit piece

Price EURO

0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05

150 150 150 150 150 500 500 500 1,000 1,000 1,000 1,000

0.5 1 3 5 25 5 25 50 1 3 5 10

1 1 1 1 1 1 1 1 1 1 1 1

8.00 12.00 23.00 32.00 95.00 45.00 172.00 298.00 35.00 78.00 105.00 135.00

THOMAFOIL-Aluminum Foil - calibrated

THOMAFOIL-Aluminum Foil - round Technical specification

• Material: aluminum • Max. temperature: +450 °C ​

Item ​ 70058 70060

Outside Ø mm

Thickness mm

Unit piece

Price EURO

100 150

0.05 0.05

100 100

70.00 110.00

THOMAFOIL-Stainless Steel Foil Product specification

• For better heat distribution/heat insulation • As separation layer between insulation and heating • As separation layer for heating of plastic pipes

Technical specification

Product specification

• Material: stainless steel 1.4301 • Max. temperature: +800 °C

• Calibrated precision foil made of pure aluminum

​

Technical specification

• Al-content: 99.0 % • Type analysis in ppm: Cu <1,000, Fe <7,000, Mn <1,000, Si <5,000, Zn <1,000 • Tolerance: ±30 % ​

Item ​

Item ​ 48313

Thickness mm

Weight g

Dimensions mm

Unit piece

Price EURO

0.001

0.04

140 x 140

25

275.00

THOMAFOIL-Aluminum Foil - medium hard

Unit piece

Price EURO

0.05 0.05 0.05 0.05 0.05 0.05 0.05

150 x 500 150 x 1,000 150 x 3.000 150 x 5.000 500 x 500 500 x 1,000 500 x 3.000

1 1 1 1 1 1 1

57.00 85.00 172.00 228.00 68.00 136.00 286.00

Product specification

• Precision foil made of pure aluminum, medium hard

• Precision foil made of pure iron, hard or annealed

Technical specification

Technical specification

• Al-content: 99.0 % • Type analysis in ppm: Cu <500, Fe + Si <10,000, Mn <500, Zn <1,000, Ti <500, others <1,500

• Fe-content: 99.5 % • Type analysis in ppm: C 1,200, Mn 5,000, S 500, P 500

​

48335 48336

Dimensions mm

THOMAFOIL-Iron Foil

Product specification

Item ​

301645 301646 301647 301648 301649 301650 301651

Thickness mm

Thickness mm

Weight g

0.125 0.125

7.549 30.38

28 THOMAPLAST® II - 2015

Dimensions Unit mm piece 150 x 150 300 x 300

1 1

​

Price EURO

Item ​

36.00 57.00

48486 48487 48488 48492 48493 48494

Thickness mm

Weight g

Design ​

Dimensions Price mm EURO

0.05 0.05 0.05 0.25 0.25 0.25

3.935 8.85 35.42 19.68 44.3 177.1

hard hard hard annealed annealed annealed

100 x 100 36.00 150 x 150 80.00 300 x 300 130.00 100 x 100 47.00 150 x 150 67.00 300 x 300 90.00

Semi-Finished Products - Metals

Foils (0.002 - 2.0 mm)

THOMAFOIL-Graphite Foil Product specification

• Foil made of purest carbon (graphite)

Technical specification

• C-content: 99.95 % • Type analysis in ppm: Al 5, Ba 1, Ca 50, Co <5, Cr <5, Cu <5, Fe 5, Ni 50, Si <5, Ti 30, V 100, Zr <20 ​

Item ​

mm

Heat transfer resistance1 ​

339633 339634 339635 339636

0.125 0.125 0.25 0.25

0.032 0.032 0.064 0.064

1

Item ​ 49019 49020 49021

Thickness mm

Weight g

0.125 0.125 0.125

0.143 0.572 2.3

Dimensions Unit mm piece 25 x 25 50 x 50 50 x 100

1 1 1

Price EURO 64.00 105.00 225.00

Thickness

Dimensions

Price

mm

EURO

500 x 1,000 500 x 500 500 x 1,000 500 x 500

146.00 84.00 165.00 98.00

inch2 x °C/W

THOMAFOIL-Copper Foil Product specification

• Precision foil made of pure copper, tempered or medium-hard

Technical specification

THOMAFOIL-High-Tech-Graphite Foil high-thermal conductivity

• Cu-content: 99.9 % • Type analysis in ppm: Ag 500, Bi <10, Pb <50, O 500, other metals <300 ​

Application area

• CPU modules, DC/DC converters, power modules, power units in automotive applications, active components in notebooks, telecommunication modules

Product specification

• Anisotropic thermal conductivity: Very high thermal conductivity along length and width (X-Y-direction), very good thermal conductivity through the thickness (Z-direction) • Silicone-free • Very soft and flexible • Very high temperature resistance • No hardening, no outgasing • Guaranteed constant layer thickness • Very good resistance to ageing • Low tightening torque required • Clean and easy mounting with high process reliability

Item ​ 48455 48456 48457

Technical specification

• Material: graphite • Colour: dark-grey • Material purity: >98 % • Density: 1.35 g/cm3 • Volume resistivity: Surface: 2.0 x 10-6 (at 0.125 mm); 1.5 x 10-6 (at 0.25 mm) Thickness: 2.0 x 10-6 (at 0.125 mm); 1.5 x 10-6 (at 0.25 mm) • Thermal conductivity: X-Y-direction (surface area): 134 W/mK Z-direction (thickness): 6 W/mK • Temperature range: -250 to +400 °C

Thickness mm

Weight g

Design ​

0.125 0.25 0.2

25.2 50.4 40.32

tempered tempered medium-hard

Dimensions Price mm EURO 150 x 150 150 x 150 150 x 150

52.00 36.00 52.00

THOMAFOIL-Copper Foil - calibrated ​

​

THOMAPLAST® II - 2015 29

Semi-Finished Products - Metals

Foils (0.002 - 2.0 mm)

Product specification

Technical specification

• Calibrated precision foil made of pure copper, hard

Technical specification

• Cu-content: 99.9 % • Type analysis in ppm: Ag 500, Bi <10, Pb <50, O 400, other metals <300 • Tolerance: ±15 % Item ​ 48451 48452

Thickness mm

Weight g

0.007 0.013

1.411 2.52

Dimensions Unit mm piece 150 x 150 150 x 150

1 1

Price EURO 126.00 116.00

• Material: IIR (butyl rubber / isobutylene-isoprene rubber) • Colour: black • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -40 to +100 °C, for a short time +120 °C • Density: 1.11 g/cm3 • Elongation at break: 600 % • Tearing strength: 13 MPa • Compression set: 35 % at +100 °C / 22 h • Volume resistivity: 5 x 106 Ohm x cm • Insert: none • Tolerance: DIN ISO 3302-1 E2 ​

THOMAFOIL-Zinc Foil Product specification

• Precision foil made of purest zinc, milled

Technical specification

• Zn-content: 99.99 % • Type analysis in ppm: Fe 19, Cd 19, Pb <40, Cu <50 ​

Item ​

Item ​ 48842

Thickness mm

Weight g

0.125

20.08

Dimensions Unit mm piece 150 x 150

1

Price EURO 126.00

Plates (0.1 - 60 mm) Elastomers THOMAPLAST -Butyl Plate - Shore 60° ®

Product specification

• Very good resistance to weather, aging, and ozone • Outstanding damping capacity • High abrasion resistance • Good elongation at break • Good thermal resistance • Lowest permeability for air, gases, and steam • Gas diffusion approx. 10 times lower as with comparable natural rubber (CR) quality • Good dielectrical properties • Good resistance to hot water, hot steam, acids, and alkalis • Poor resistance to fuel and mineral oils • Chemical features: Butyl rubber is obtained by copolymerizing isobutylene with defined proportions of isoprene and vulcanized with sulfur.

Mixing of IIR and other elastomers is not possible.

Resistance to aging and weather decreases with increasing isoprene component.

30 THOMAPLAST® II - 2015

19524 19525 19526 19527 19528 19529 19530 19531 19532 19533 19534 19535 19536 19537

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 3 4 5 6 1 1.5 2 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1 1 1

58.00 76.00 83.00 101.00 117.00 137.00 155.00 106.00 133.00 155.00 204.00 254.00 275.00 306.00

THOMAPLAST®-Butyl Plate with PTFE Coat - Shore 60° Product specification

• Tightly bonded two-plate combination made of IIR and PTFE. • Ideally suitable for punching of sealings for the pharmaceutical packaging industry.

Technical specification

• Material: IIR (butyl rubber); PTFE (polytetrafluoroethylene) • Colour: red (IIR), grey (PTFE) • Shore hardness A: 60° ±5° (DIN 53505) • Thickness of PTFE coating: 0.2 mm • Temperature range: -40 to +100 °C referring to IIR • Diffusion rate: very low, extraordinary permeability due to sandwich effect • Tolerance: IIR ±0.3 mm; PTFE ±0.01 mm ​

Item ​ 19158 19159

Thickness mm

Dimensions mm

Unit piece

Price EURO

1.4 1.4

600 x 500 600 x 1,000

1 1

187.00 298.00

Semi-Finished Products - Elastomers Item ​ 19160 19161 19162 19163

Plates (0.1 - 60 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

1.8 1.8 3 3

600 x 500 600 x 1,000 600 x 500 600 x 1,000

1 1 1 1

209.00 333.00 220.00 352.00

Item ​ 19591 19592 19593 19594 19595 19596 19597 19598 19599

THOMAPLAST®-CR/SBR Plate - Shore 45° Product specification

• Good elastic behavior • Average mechanical stability • Good abrasion resistance • Good thermal resistance • Good resistance to aging, weather, and ozone • High flame resistance • Good resistance to diluted acids and alkalis, limited resistance to mineral oils • Poor resistance to solvents and steam • Chemical features: CR is a all-round synthetic rubber basing on polychloroprene.

Chloroprene rubber is vulcanized in different systems influencing parameters such as compression set, oil resistance, thermal resistance, and tendency to crystallization.

Use in contact with mineral oils possible, although swelling is stronger compared to NBR, depending on the respective compound specification.

Less suitable for outdoor applications.

Technical specification

• Material: CR (chloroprene rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 45° ±5° (DIN 53505) • Temperature range: -20 to +70 °C, for a short time +100 °C • Density: 1.25 g/cm3 • Elongation at break: 350 % • Tearing strength: 6 MPa • Compression set: 35 % at +70 °C / 22 h • Insert: none • Tolerance: DIN ISO 3302-1 E2

Thickness mm

Dimensions mm

Unit piece

Price EURO

6 1 1.5 2 2.5 3 4 5 6

700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1

122.00 105.00 120.00 129.00 144.00 150.00 176.00 196.00 228.00

THOMAPLAST®-CR/SBR Plate - Shore 65° Product specification

• Good elastic behavior • Average mechanical stability • Good abrasion resistance • Good thermal resistance • Limited resistance to weather • High flame resistance • Good resistance to diluted acids and alkalis, limited resistance to mineral oils • Poor resistance to solvents and steam • Chemical features: CR is a all-round synthetic rubber basing on polychloroprene.

Chloroprene rubber is vulcanized in different systems influencing parameters such as compression set, oil resistance, thermal resistance, and tendency to crystallization.

Use in contact with mineral oils possible, although swelling is stronger compared to NBR, depending on the respective compound specification.

Less suitable for outdoor applications.

Technical specification

• Material: CR (chloroprene rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -30 to +70 °C • Density: 1.4 g/cm3 • Elongation at break: 200 % • Tearing strength: 6 MPa • Volume resistivity: >109 Ohm x cm • Insert: none • Tolerance: DIN ISO 3302-1 E2

​

​

Item ​ 19584 19585 19586 19587 19588 19589 19590

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700

1 1 1 1 1 1 1

61.00 65.00 71.00 79.00 81.00 97.00 112.00

Item ​ 19614 19616

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1

600 x 600 600 x 600

1 1

54.00 61.00

THOMAPLAST® II - 2015 31

Semi-Finished Products - Elastomers Item ​ 19617 19618 19619 19620 19621 19622 19623 19626 19627 19628 19629 19630 19631 19632 19633 301080 301081 301082 301083 301084 301085 301086 301093 301094 301095 301096 301097 301098 301099

Plates (0.1 - 60 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 25 30 8 10 12 15 20 25 30

600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 250 x 350 250 x 350 250 x 350 250 x 350 250 x 350 250 x 350 250 x 350 350 x 500 350 x 500 350 x 500 350 x 500 350 x 500 350 x 500 350 x 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

63.00 65.00 66.00 67.00 69.00 71.00 80.00 86.00 88.00 95.00 99.00 102.00 120.00 137.00 146.00 121.00 139.00 149.00 162.00 169.00 177.00 190.00 185.00 208.00 220.00 264.00 297.00 318.00 330.00

THOMAPLAST®-CR/SBR Plate - Shore 80° Product specification

• Good elastic behavior • Average mechanical stability • Good abrasion resistance • Good thermal resistance • Good resistance to aging, weather, and ozone • High flame resistance • Good resistance to diluted acids and alkalis, limited resistance to mineral oils • Poor resistance to solvents and steam

32 THOMAPLAST® II - 2015

• Chemical features: CR is a all-round synthetic rubber basing on polychloroprene.

Chloroprene rubber is vulcanized in different systems influencing parameters such as compression set, oil resistance, thermal resistance, and tendency to crystallization.

Use in contact with mineral oils possible, although swelling is stronger compared to NBR, depending on the respective compound specification.

Less suitable for outdoor applications.

Technical specification

• Material: CR (chloroprene rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 80° ±5° (DIN 53505) • Temperature range: -20 to +70 °C • Density: 1.5 g/cm3 • Elongation at break: 200 % • Tearing strength: 5 MPa • Tear propagation resistance: 20 N/mm • Compression set: 16 % at +70 °C / 24 h • Insert: none • Tolerance: DIN ISO 3302-1 E2 ​

Item ​ 19634 19635 19636 19637 19638 19639 19640 19641 19642 19643 19644 19645 19646 19647 19648 19649

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

65.00 68.00 75.00 81.00 89.00 102.00 117.00 137.00 129.00 124.00 132.00 146.00 160.00 188.00 211.00 247.00

THOMAPLAST®-CR/SBR Food Plate - Shore 60° Product specification

• Good elastic behavior • Average mechanical stability • Good abrasion resistance • Good resistance to aging, weather, and ozone • High flame resistance, good thermal resistance • Good resistance to diluted acids and alkalis, limited resistance to mineral oils • Poor resistance to solvents and steam • Chemical features: CR is a all-round synthetic rubber basing on polychloroprene.

Chloroprene rubber is vulcanized in different systems influencing parameters such as compression set, oil resistance, thermal resistance, and tendency to crystallization.

Use in contact with mineral oils possible, although swelling is stronger compared to NBR, depending on the respective compound specification.

Less suitable for outdoor applications.

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

• Material: CR (chloroprene rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: white • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -20 to +90 °C • Specific features: physiologically safe • Density: 1.46 g/cm3 • Elongation at break: 550 % • Tearing strength: 6 MPa • Compression set: 25 % at +72 °C / 23 h • Insert: none • Tolerance: DIN ISO 3302-1 E2

Item

​

​

Item ​ 19601 19602 19603 19604 19605 19606 19608 19609 19610 19611 19612 19613

Thickness mm

Dimensions mm

Unit piece

Price EURO

1.5 2 3 4 5 6 1.5 2 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1

79.00 90.00 109.00 129.00 151.00 172.00 143.00 170.00 194.00 240.00 269.00 319.00

THOMAPLAST®-CR/SBR Plate with Insert - Shore 60° Product specification

• Robust elastomer • Increased tensile and pressure strength • Good mechanical properties • Good elastic behavior • Very high abrasion resistance • Very good thermal resistance • Outstanding resistance to aging and weather

301112 301117 301122 301113 301118 301123 301114 301119 301124 301115 301120 301125 301116 301121 301126

Thickness Number of inserts mm ​ 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6

1 1 1 1 1 1 1 1 1 1 1 1 2 2 2

Dimensions

Unit

Price

mm

piece

EURO

250 x 350 350 x 500 500 x 700 250 x 350 350 x 500 500 x 700 250 x 350 350 x 500 500 x 700 250 x 350 350 x 500 500 x 700 250 x 350 350 x 500 500 x 700

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

77.00 123.00 192.00 93.00 144.00 223.00 121.00 197.00 300.00 141.00 220.00 310.00 156.00 259.00 356.00

THOMAPLAST®-CSM Plate - Shore 70° Product specification

• Very high abrasion resistance • Good mechanical properties • Very good resistance to ozone, light, and weather • Good resistance to aging • Good cold and thermal resistance • Good flame resistance • Good resistance to acids and alkalis • Limited resistance to mineral oils and derivatives • Not resistant to fuels • Chemical features: Chlorosulfonated polyethylene is based on the sulfochlorination of polyethylene. An extremely elastic, vulcanized rubber is produced by this process.

Mineral oil resistance and flame resistance of the tubing improve with increasing chlorine content of the production formulation. ​

Technical specification

• Material: CR (chloroprene rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 60° ±7° (DIN 53505) • Density: 1.36 g/cm3 (DIN 53479) • Temperature range: -10 to +70 °C • Design: on both sides completely smooth, with polyamide fabric insert • Thickness tolerance: DIN 7715 P2 ​

THOMAPLAST® II - 2015 33

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

Technical specification

• Material: CSM (chlorosulfonyl-polyethylene rubber) • Colour: black • Shore hardness A: 70° ±5° (DIN 53505) • Temperature range: -30 to +120 °C • Density: 1.37 g/cm3 • Elongation at break: 400 % • Tearing strength: 8 MPa • Abrasion: 390 mm2 (DIN 53516) • Compression set: 48 % at +70 °C / 22 h • Volume resistivity: 1.2 x 1012 Ohm x cm • Insert: none • Tolerance: DIN ISO 3302-1 E2 Item ​ 19834 19835 19836 19837 19838 19839 19840 19841 19842 19843 19844 19845 19846 19847

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500

1 1 1 1 1 1 1 1 1 1 1 1 1 1

41.00 48.00 55.00 69.00 75.00 99.00 117.00 117.00 126.00 147.00 166.00 181.00 237.00 262.00

• Material: EPDM (ethylene-propylene-diene rubber and terpolymer rubber resp.)

• Colour: black • Shore hardness A: 25° ±5° (DIN ISO 7619-1) • Temperature range: -45 to +100 °C • Density: 1.00 g/cm3 • Elongation at break: >400 % (DIN 53504/ISO 37) • Tearing strength: >3.5 MPa (DIN 53504/ISO 3) • Rebound elasticity: >50 % (DIN 53512) • Tear propagation resistance: 4.3 N/mm (DIN ISO 34-1, strip specimen); 50.7 N/mm (ASTM 624 D) • Compression set: 8.5 % at +70 °C / 24 h (DIN 53517/ISO 815) • Volume resistivity: 1.5 x 1013 Ohm x cm • Abrasion: 154 mm3 (DIN ISO 4649) • Burning behaviour: 34.5 mm/min. (2.0 mm) • Insert: none • Tolerance: DIN ISO 3302-1 E2 • Specific features: nitrosamine-free, UV-resistant Item ​ 19187 19188 19189 19190 19191 19192 19193 19194 19195 19196

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 3 4 1 1.5 2 3 4

650 x 650 650 x 650 650 x 650 650 x 650 650 x 650 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.400 x 1.400 1.300 x 1.300

1 1 1 1 1 1 1 1 1 1

65.00 68.00 72.00 86.00 112.00 125.00 137.00 146.00 176.00 242.00

THOMAPLAST®-EPDM Plate – Shore 25° Product specification

• Extra soft quality, no cellular rubber or foam rubber • Very good resistance to weather and aging • Very good cold and thermal resistance • Very good elastic behavior, good dielectrical properties • Good resistance to hot water, hot steam, glycols, brake fluid, and polar solutions • Limited resistance to acids and alkalis, • Poor resistance to mineral oils and fuels • Chemical features: EPDM is a sulfur vulcanized synthetic rubber containing diene components. The terpolymer EPDM is of outstanding stability to oxygen and ozone. Its chemical properties cause its excellent resistance to light, aging, and weather.

THOMAPLAST®-EPDM Plate - Shore 50° Product specification

• Very good resistance to weather and aging • Very good cold and thermal resistance • Good elastic behavior, good dielectrical properties • Outstanding elongation at break and tearing strength • Very good resistance to acids and alkalis • Good resistance to hot water, hot steam, glycols, brake fluid, and polar solutions • Poor resistance to mineral oils and fuels • Chemical features: EPDM is a sulfur vulcanized synthetic rubber containing diene components. The terpolymer EPDM is of outstanding stability to oxygen and ozone. Its chemical properties cause its excellent resistance to light, aging, and weather.

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber and terpolymer rubber resp.)

• Colour: black • Shore hardness A: 50° ±5° (DIN 53505) • Temperature range: -40 to +130 °C, for a short time +150 °C • Density: 1.07 g/cm3 • Elongation at break: 350 % • Tearing strength: 12 MPa • Rebound elasticity: 45 % • Tear propagation resistance: 132.6 N/mm (ASTM 624 D) • Compression set: 11.3 % at +70 °C / 24 h • Surface resistivity: 108 Ohm (DIN EN 100 015/1) • Abrasion: 77 mm3 (DIN ISO 4649)

34 THOMAPLAST® II - 2015

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

• Burning behaviour: 20 mm/min (FMVSS302) • Insert: none • Tolerance: DIN ISO 3302-1 E2 • Regulations: KTW-approval D1 and D2 (approved for drinking water, food quality); Works standard specification: Volkswagenwerk (VW 2.8.1 G50) ​

Item ​ 19568 19569 19570 19572 19573 19574 19575 19576 19577 19578 19580 19581 19582 19583

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 3 4 5 6 1 1.5 2 3 4 5 6

650 x 650 650 x 650 650 x 650 650 x 650 650 x 650 650 x 650 650 x 650 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300

1 1 1 1 1 1 1 1 1 1 1 1 1 1

69.00 76.00 79.00 97.00 109.00 125.00 147.00 114.00 142.00 150.00 175.00 234.00 250.00 274.00

Item ​ 19554 19555 19556 19557 19558 19559 19560 19561 19562 19563 19564 19565 19566 19567

THOMAPLAST®-EPDM Plate - Shore 65° Product specification

• Food quality • Very good resistance to weather and aging • Very good cold and thermal resistance • Good elastic behavior, good dielectrical properties • Good elongation at break and tearing strength • Very good resistance to acids and alkalis • Good resistance to hot water, hot steam, glycols, brake fluid, and polar solutions • Poor resistance to mineral oils and fuels • Chemical features: EPDM is a sulfur vulcanized synthetic rubber containing diene components. The terpolymer EPDM is of outstanding stability to oxygen and ozone. Its chemical properties cause its excellent resistance to light, aging, and weather.

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber and terpolymer rubber resp.)

• Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -35 to +130 °C, for a short time +150 °C • Density: 1.13 g/cm3 • Elongation at break: >230 % (DIN 53504 / ISO 37) • Tearing strength: 12.5 MPa (DIN 53504 / ISO 3) • Rebound elasticity: >35 % (DIN 53512) • Compression set: 7.5 % at +70 °C / 24 h • Volume resistivity: 4.61 x 107 Ohm x cm • Tear propagation resistance: 121.6 N/mm (ASTM 624 D) • Abrasion: 163 mm3 (DIN ISO 4649) • Burning behaviour: 21.7 mm/min • Insert: none • Specific features: sulfur-free, peroxide cross-linked, indifferent to lacquer, silicone-free, nitrosamine-free • Tolerance: DIN ISO 3302-1 E2 • Approvals: KTW-D1 and D2 for hot water +85 °C according to FDA §177.2600; Works standard specification: Volkswagenwerk (VW 2.8.1 G50), DBL 5556.21

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 3 4 5 6 1 1.5 2 3 4 5 6

650 x 650 650 x 650 650 x 650 650 x 650 650 x 650 650 x 650 650 x 650 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300 1.300 x 1.300

1 1 1 1 1 1 1 1 1 1 1 1 1 1

65.00 72.00 75.00 97.00 110.00 137.00 166.00 111.00 126.00 119.00 180.00 199.00 262.00 281.00

THOMAPLAST®-EPDM Plate - Shore 80° Product specification

• Very good resistance to weather • Good resistance to aging • Very good cold and thermal resistance • Medium elongation at break • Good dielectrical properties • Good resistance to acids, alkalis, hot water, hot steam, glycols, and polar solutions • Poor resistance to mineral oils and fuels • Chemical features: EPDM is a sulfur vulcanized synthetic rubber containing diene components. The terpolymer EPDM is of outstanding stability to oxygen and ozone. Its chemical properties cause its excellent resistance to light, aging, and weather.

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber and terpolymer rubber resp.)

• Colour: black • Shore hardness A: 80° ±5° (DIN 53505) • Temperature range: -40 to +100 °C • Specific features: sulfur vulcanized • Density: 1.40 g/cm3 • Elongation at break: 300 % • Tearing strength: 5 MPa • Insert: none • Tolerance: DIN ISO 3302-1 E2 ​

​

THOMAPLAST® II - 2015 35

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

THOMAPLAST®-High-Chem EPDM/PP Plate - Shore 64° Application area

• Pharmacy, medicine, chemistry and biology, beverage industry, fermenters, container and tank construction, machine and apparatus engineering

Product specification

Item ​ 19538 19539 19540 19541 19542 19543 19544 19545 19546 19547 19548 19549 19550 19551 19552 19553

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

51.00 62.00 70.00 74.00 78.00 90.00 102.00 111.00 81.00 107.00 135.00 148.00 157.00 176.00 216.00 253.00

THOMAPLAST®-EPDM Sheet with PTFE Coat Technical specification

• Material: EPDM (ethylene-propylene-diene rubber and terpolymer rubber resp.), PTFE (polytetrafluoroethylene) • Colour: black (EPDM), white (PTFE) ​

• Sheets made of recyclable thermoplastic elastomer with a lot of possible applications • Very durable • Especially resistant to deformation and bending • Very well suited for food contact • Very good resistance to aqueous media, acids, alkalis and many organic solvents, particularly to alcohols, glycols, ketones, aldehydes and esters • Good resistance to milk and vegetable oils • Unstable to hydrocarbons, fuels, mineral oils and hydraulic oils • Excellent resistance to ozone and UV radiation • Excellent resistance to aging • Easily to weld by heating, e.g. to make round sleeves • Low gas and water vapor permeability • High tensile strength

Technical specification

• Material: EPDM/PP (thermoplastic elastomer); Compound of EPDM (ethylene-propylene-diene rubber) and PP (polypropylene) as well as stabilizing additives • Colour: beige • Shore hardness A: 64° ±5° (DIN 53505) • Density: 0.97 ±0.3 g/cm3 (DIN 53479) • Temperature range: -45 to +135 °C, for a short time +150 °C • Melting point: >+162 °C; decomposition >+265 °C • Elongation at break: >400 % (DIN 53504) • Tensile strength: >6.5 MPa (DIN 53504) • Elastic modulus: 2.3 MPa (DIN 53504) • Compression set: +25 °C / 168 h: 23 % (ASTM D 995 method B) +100 °C / 168 h: 36 % (ASTM D 995 method B) • Tolerance: DIN ISO 3302-1 E2 • Sterilization: water vapor (+134 °C), gas (ethylene oxide), gamma rays (up to 4 megarads) • Regulations: FDA standard 21, CFR § 177.2600, LMBG, NSF 51, EU 2003/11/EC ​

Item ​ 81257 81258 81259 81261 81262 81263

Thickness of carrier layer mm

Thickness of coating mm

Dimensions

Unit

mm

piece

EURO

2 3 4 2 3 4

0.2 0.2 0.2 0.2 0.2 0.2

300 x 300 300 x 300 300 x 300 150 x 150 150 x 150 150 x 150

1 1 1 1 1 1

116.00 144.00 151.00 72.00 90.00 95.00

36 THOMAPLAST® II - 2015

Price

Item ​ 301020 301021 301022 301023 301024

Thickness mm

Dimensions mm

Price EURO

0.5 1 1.5 2 3

300 x 1,000 300 x 1,000 300 x 1,000 300 x 1,000 300 x 1,000

66.00 106.00 120.00 133.00 160.00

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

THOMAPLAST®-FPM Plate - Shore 70°

Item ​

Product specification

• Very good resistance to ozone and oxygen • Very good resistance to aging and weather • Sulfur-free • High flame resistance • Highest temperature resistance • Excellent thermal resistance • Good elongation at break • Relative abrasion resistance • Limited flexibility in cold • Very good chemical resistance to petrol, oil, acids, and alkalis • Chemical features: FPM are copolymers of highest quality made of fluorinated hydrocarbons.

Fluorinated rubber belongs to the most expensive elastomers and is used exclusively in chemical-technical application areas according to its highly qualified features.

Its outstanding thermal and chemical properties are unrenounceable especially in the sealing technique.

Basically, a difference is made between copolymer made of vinylidene fluoride with hexafluoro propylene and FPM-terpolymer with improved chemical resistance and flexibility in the cold.

Technical specification

• Material: FPM (fluorinated hydrocarbon polymer) • Colour: black • Shore hardness A: 70° ±5° (DIN 53505) • Temperature range: -20 to +200 °C, for a short time +250 °C • Density: 1.9 - 2.1 g/cm3 • Elongation at break: 270 % (DIN 53504) • Tearing strength: 7 MPa (DIN 53504) • Compression set: 40 % at +175 °C / 24 h • Volume resistivity: 5.5 x 1012 Ohm x cm • Insert: none • Tolerance: DIN ISO 3302-1 E2 • Burning behaviour: UL 94 V-0 • Specific features: bisphenol-crosslinked

19921 19922 19923

Thickness mm

Dimensions mm

Unit piece

Price EURO

3 4 5

1.500 x 1,000 1.500 x 1,000 1.500 x 1,000

1 1 1

1,273.00 1,514.00 1,886.00

THOMAPLAST®-FPM Plate - Shore 75° Product specification

• Very good resistance to ozone and oxygen • Very good resistance to aging and weather • High flame resistance • Highest temperature resistance • Very good thermal resistance • Self-extinguishing • Sulfur-free • Moderate elongation at break • Relative abrasion resistance • Limited flexibility in cold • Good chemical resistance to petrol, oil, acids, and alkalis • Chemical features: FPM are copolymers of highest quality made of fluorinated hydrocarbons.

Fluorinated rubber belongs to the most expensive elastomers and is used exclusively in chemical-technical application areas according to its highly qualified features.

Its outstanding thermal and chemical properties are unrenounceable especially in the sealing technique.

Basically, a difference is made between copolymer made of vinylidene fluoride with hexafluoro propylene and FPM-terpolymer with improved chemical resistance and flexibility in the cold.

Technical specification

• Material: FPM (fluorinated hydrocarbon polymer) • Colour: black • Shore hardness A: 75° ±5° (DIN 53505) • Temperature range: -10 to +200 °C, for a short time +250 °C • Density: 1.85 - 1.93 g/cm3 • Elongation at break: 180 % (DIN 53504) • Tearing strength: 10 MPa (DIN 53504) • Compression set: 25 % at +200 °C / 24 h • Volume resistivity: 1.6 x 1011 Ohm x cm • Insert: none • Tolerance: DIN ISO 3302-1 E2 • Burning behaviour: UL 94 V-0 • Specific features: bisphenol-crosslinked, electrical isolation, E10-conform, E85-conform (Bioethanol) • Regulations: FDA-conform

​

​

Item ​ 333895 19911 19912 19913 19914 19915 19916 333896 19917 19918 19920

Thickness mm

Dimensions mm

Unit piece

0.5 1 1.5 2 3 4 5 0.5 1 1.5 2

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1.500 x 500 1.500 x 500 1.500 x 1,000

1 1 1 1 1 1 1 1 1 1 1

Price EURO 136.00 212.00 245.00 268.00 325.00 356.00 398.00 419.00 663.00 774.00 913.00

Item ​ 40255 40257

Thickness mm

Dimensions mm

Unit piece

1 1.5

200 x 200 200 x 200

1 1

Price EURO 84.00 133.00

THOMAPLAST® II - 2015 37

Semi-Finished Products - Elastomers Item ​ 40259 40261 40263 40256 40258 40260 40262 40264 19894 19895 19896 19897 19899 19900 19901 19902 19903 19904 19905 19906 19907 19908 19909 19910

Plates (0.1 - 60 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

2 3 4 1 1.5 2 3 4 0.5 1 1.5 2 3 4 5 6 0.5 1 1.5 2 3 4 5 6

200 x 200 200 x 200 200 x 200 300 x 300 300 x 300 300 x 300 300 x 300 300 x 300 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

138.00 159.00 235.00 140.00 175.00 190.00 230.00 299.00 132.00 151.00 188.00 207.00 265.00 299.00 321.00 370.00 269.00 320.00 401.00 473.00 700.00 818.00 1,016.00 1,255.00

THOMAPLAST®-NBR Plate - Shore 65° Product specification

• Very good abrasion resistance • Outstanding rubber-elastic properties also at extreme bending radiuses • Good thermal resistance • Good resistance to aging and weather • Very good resistance to mineral oils, vegetable and animal oils, silicone as well as diluted acids and alkalis at room temperature • Insufficient resistance to solvents and flame-resistant hydraulic fluids • Good resistance to super petrol • Chemical features: Nitrile rubber is a copolymer basing on butadiene and acrylonitrile. Resistance to fuels and mineral oils improves with increasing acrylonitrile component, but at the same time elastic behavior, cold flexibility, and gas tightness deteriorate.

Technical specification

• Material: NBR (nitrile-butadiene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -30 to +120 °C • Density: 1.48 g/cm3 • Elongation at break: 350 % • Tearing strength: 7 MPa • Compression set: <30 % at +100 °C / 70 h • Insert: none • Specific features: sulfur-crosslinked ​

THOMAPLAST®-FPM Sheet with PTFE Coat Technical specification

• Material: FPM (fluorinated hydrocarbon polymer), PTFE (polytetrafluoroethylene) • Colour: black (FPM), white (PTFE) ​

Item ​

Item ​ 81275 81276 81277 81279 81280 81281

Thickness of carrier layer mm

Thickness of coating mm

Dimensions

Unit

mm

piece

EURO

2 3 4 2 3 4

0.2 0.2 0.2 0.2 0.2 0.2

300 x 300 300 x 300 300 x 300 150 x 150 150 x 150 150 x 150

1 1 1 1 1 1

233.00 300.00 392.00 98.00 121.00 151.00

38 THOMAPLAST® II - 2015

Price

196661 19666 19667 19668 19669 19670 19671 19672 19673 19674 19675 19676 19677 19678 19679 19680 19681

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

600 x 600 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

49.00 58.00 61.00 68.00 72.00 75.00 89.00 97.00 111.00 86.00 101.00 117.00 127.00 132.00 150.00 170.00 198.00

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

THOMAPLAST®-NBR Plate - Shore 80°

THOMAPLAST®-NBR Food Plate - Shore 60°

Product specification

Product specification

• Absolutely gas-tight • Very good abrasion resistance • Medium rubber-elastic behavior • Good thermal resistance • Poor resistance to aging and weather • Good resistance to mineral oils, fuels, vegetable and animal oils, silicones as well as diluted acids and alkalis at room temperature • Insufficient resistance to solvents and flame-resistant hydraulic fluids • Chemical features: Nitrile rubber is a copolymer basing on butadiene and acrylonitrile.

Resistance to fuels and mineral oils improves with increasing acrylonitrile component.

Technical specification

• Material: NBR (nitrile-butadiene rubber) • Colour: black • Shore hardness A: 80° ±5° (DIN 53505) • Temperature range: -15 to +80 °C • Specific features: absolutely gas-tight • Density: 1.35 g/cm3 • Elongation at break: 250 % • Tearing strength: 13 MPa • Compression set: 35 % at +100 °C / 168 h • Volume resistivity: 1.2 x 104 Ohm x cm • Insert: none • Tolerance: DIN ISO 3302-1 E2 • Regulations: DVGW approval

• Food quality • Very good abrasion resistance • Outstanding rubber-elastic properties also at extreme bending radiuses • Good thermal resistance • Good resistance to aging and weather • Good resistance to mineral oils, vegetable and animal oils, silicone as well as diluted acids and alkalis at room temperature • Insufficient resistance to solvents, flame-resistant hydraulic fluids, and fuels • Chemical features: Nitrile rubber is a copolymer basing on butadiene and acrylonitrile. Resistance to fuels and mineral oils improves with increasing acrylonitrile component, but at the same time elastic behavior, cold flexibility, and gas tightness deteriorate.

Technical specification

• Material: NBR (nitrile-butadiene rubber) • Colour: white • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -30 to +80 °C • Specific features: indifferent to lacquer • Density: 1.32 g/cm3 • Elongation at break: 500 % • Tearing strength: 11 MPa • Compression set: 35 % at +70 °C / 22 h • Volume resistivity: 2 x 1012 Ohm x cm • Insert: none • Regulations: KTW-approval; BgVV XXI Cat.2

​

​

Item ​ 19818 19819 19820 19821 19822 19823 19824 19825 19826 19827 19828 19829 19830 19831 19832 19833

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

79.00 88.00 108.00 120.00 130.00 153.00 178.00 206.00 141.00 162.00 191.00 214.00 224.00 293.00 360.00 424.00

Item ​ 19682 19683 19684 19685 19686 19687 19688 19689 19690 19691 19692 19693 19694 19695 19696 19697

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

69.00 72.00 86.00 94.00 104.00 119.00 137.00 155.00 114.00 135.00 153.00 162.00 184.00 200.00 252.00 275.00

THOMAPLAST® II - 2015 39

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

THOMAPLAST®-High-Tech NBR/Aramid Packing Plate - PTFE-coated Application area

• For plant and pipeline construction, for building of apparatuses and machines, for use in the beverage and food processing industry

Product specification

• Outstanding tensile strength, good pressure stability • Very low gas leakage • Very good resistance to oils • Very high temperature load possible • Simultaneous load with maximum permissible values of pressure and temperature is not allowed during operation

Technical specification

• Material: NBR (nitrile-butadiene rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 50° ±5° (DIN 53505) • Temperature range: -35 to +70 °C • Density: 1.3 g/cm3 • Elongation at break: 200 % • Tearing strength: 4 MPa • Compression set: 40 % at +70 °C / 22 h • Insert: none • Tolerance: DIN ISO 3302-1 E2 ​

Technical specification

• Material: NBR-bonded material on aramid fibre base; NBR (butadieneacrylonitrile rubber) • Colour: green with black print • Max. temperature: +150 °C, for a short time +300 °C • Density: 1.8 g/cm3 (DIN 53479) • Max. operating pressure: 100 bar • Pressure resistance: >25 N/mm2 at +300 °C (DIN 52913) • Resilience: >55 % (ASTM F 36 J) • Compressibility: 5 - 12 % (ASTM F 36 J) • Permeability to gas: <0.5 cm3/min. (DIN 3535 T.4) • Regulations: gas leakage DIN 3535 Part 6 <0.5 ml/min. DVGM, SVGW, KTW, BAM, HTB • Design: PTFE-coated (both sides) ​

Item ​ 300960 300961 300962

Thickness mm

Tolerance mm

1 1.5 2

±0.1 ±0.2 ±0.2

Dimensions Unit mm piece 750 x 750 750 x 750 750 x 750

1 1 1

Price EURO 177.00 202.00 225.00

THOMAPLAST®-NBR/SBR Plate - Shore 50° Product specification

• Very good abrasion resistance • Outstanding rubber-elastic properties also at extreme bending radiuses • Good thermal resistance • Good resistance to aging and weather • Average mechanical stability • Very good resistance to mineral oils, vegetable and animal oils, silicone as well as diluted acids and alkalis at room temperature • Insufficient resistance to solvents, flame-resistant hydraulic fluids, and fuels.

• Chemical features: Nitrile rubber is a copolymer basing on butadiene and acrylonitrile. Resistance to fuels and mineral oils improves with increasing acrylonitrile component, but at the same time elastic behavior, cold flexibility, and gas tightness deteriorate.

40 THOMAPLAST® II - 2015

Item ​ 19650 19651 19652 19653 19654 19655 19656 19657 19658 19659 19660 19661 19662 19663 19664 19665

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

68.00 71.00 79.00 86.00 97.00 115.00 132.00 151.00 135.00 126.00 147.00 155.00 166.00 211.00 240.00 273.00

THOMAPLAST®-NBR/SBR Plate - Shore 80° Product specification

• Very good abrasion resistance • Good rubber-elastic properties also at extreme bending radiuses • Good thermal resistance • Low resistance to aging and weather • Average mechanical stability • Limited resistance to mineral oils, vegetable and animal oils, silicone as well as diluted acids and alkalis at room temperature • Insufficient resistance to solvents, flame-resistant hydraulic fluids, and fuels • Chemical features: Nitrile rubber is a copolymer basing on butadiene and acrylonitrile.

Resistance to fuels and mineral oils improves with increasing acrylonitrile component, but at the same time elastic behavior, cold flexibility, and gas tightness deteriorate.

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

Technical specification

• Material: NBR (nitrile-butadiene rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 80° ±5° (DIN 53505) • Temperature range: -20 to +70 °C • Density: 1.4 g/cm3 • Elongation at break: 200 % • Tearing strength: 5 MPa • Compression set: 30 % at +70 °C / 22 h • Insert: none • Tolerance: DIN ISO 3302-1 E2

• Material: NR (natural rubber) • Additive components: SBR (styrene-butadiene rubber) • Colour: white • Shore hardness A: 45° ±5° (DIN 53505) • Temperature range: -30 to +70 °C • Specific features: food quality; FDA §177.2600 and BgVV XXI, Cat. 1 • Density: 1.27 g/cm3 • Elongation at break: 550 % • Tearing strength: 12 MPa • Compression set: 35 % at +70 °C / 22 h • Insert: none • Tolerance: DIN ISO 3302-1 E2

​

​

Item ​ 19698 19699 19700 19701 19702 19703 19704 19705 19706 19707 19708 19709 19710 19711 19712 19713

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500 1.500 x 1.500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

65.00 68.00 72.00 76.00 80.00 83.00 92.00 97.00 104.00 124.00 144.00 154.00 174.00 193.00 233.00 260.00

THOMAPLAST®-NR/SBR Food Plate - Shore 45° Product specification

• Food quality • High tearing strength • Very good impact elasticity • Good elastic behavior • Outstanding abrasion resistance • High cohesive friction • Good resistance to aging • Good resistance to acids and alkalis • Not resistant to mineral oils, solvents, and fuels • Chemical features: SBR is a synthetic rubber with properties similar to natural rubber.

Copolymers made of SBR base on butadiene rubber and have a styrene content of 10 % to 35 %. With increasing styrene component, the properties of SBR change to limited elasticity.

SBR is often mixed with NR, an ideal material symbiosis making use of the outstanding elastic behavior of NR.

Item ​ 19714 19715 19716 19717 19718 19719 19720 19721 19722 19723 19724 19725 19726 19727 19728 19729

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

65.00 71.00 75.00 83.00 90.00 109.00 122.00 145.00 110.00 121.00 129.00 148.00 167.00 204.00 219.00 262.00

THOMAPLAST®-PUR Plate - Shore 72° Product specification

• Very good mechanical properties • Outstandingly elastic behavior, comparable to soft rubber • Very good resistance to abrasion • Especially smooth surface • Good tear propagation resistance (tearing strength) • High self-damping • Equipped with protection to hydrolysis • Resistant to aging • Only relatively usable for slipping functions • Material with rubber-elastic properties for highest mechanical load in machine and apparatus construction.

• Excellent chemical resistance to oils, good chemical resistance to petrols, of limited resistance to acids and alkalis.

THOMAPLAST® II - 2015 41

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

• Material: PUR (polyurethane) • Colour: brown • Shore hardness A: 72° ±5° (DIN 53505) • Temperature range: -10 to +60 °C • Specific features: high tearing strength, fitted with protection to hydrolysis • Density: 1.24 g/cm3 (DIN 53479) • Elongation at break: 550 % (DIN 53504) • Tearing strength: 44 MPa (DIN 53504) • Abrasion: 30 mm2 (DIN 53516) • Tear propagation resistance: 15 N/mm (DIN 53507) • Compression set: 20 % at +70 °C / 24 h • Insert: none • Tolerance: DIN 7715 T5 P3 ​

Technical specification

• Material: PUR (polyurethane) • Colour: brown • Shore hardness A: 80° ±5° (DIN 53505) • Temperature range: -10 to +60 °C • Specific features: high tearing strength, fitted with protection to hydrolysis • Density: 1.24 g/cm3 (DIN 53479) • Elongation at break: 570 % (DIN 53504) • Tearing strength: 46 MPa (DIN 53504) • Abrasion: 29 mm2 (DIN 53516) • Tear propagation resistance: 25 N/mm (DIN 53507) • Compression set: 26 % at +70 °C / 24 h • Insert: none • Tolerance: DIN 7715 T5 P3 ​

Item ​

Item ​ 300126 300127 300128 300129 300130 300131 300132 300133 300135 300136 300137 300138 300139 300140 300141

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

71.00 75.00 79.00 89.00 101.00 112.00 132.00 153.00 135.00 138.00 158.00 185.00 211.00 249.00 298.00

THOMAPLAST®-PUR Plate - Shore 80° Product specification

• Very good mechanical properties • Elastic behavior • Very good resistance to abrasion • Especially smooth surface • Good tear propagation resistance (tearing strength) • High self-damping • Equipped with protection to hydrolysis • Resistant to aging • Only relatively usable for slipping functions • Material with rubber-elastic properties for highest mechanical load in machine and apparatus construction.

• Excellent chemical resistance to oils, good chemical resistance to petrols, of limited resistance to acids and alkalis.

42 THOMAPLAST® II - 2015

300110 300111 300112 300113 300114 300115 300116 300117 300119 300120 300121 300122 300123 300124 300125

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

71.00 75.00 79.00 89.00 101.00 112.00 132.00 153.00 135.00 138.00 158.00 185.00 211.00 249.00 298.00

THOMAPLAST®-PUR Plate - Shore 90° Product specification

• Very good mechanical properties • Very good resistance to abrasion • Especially smooth surface • Cutting possible from Shore A 90 onwards • Good tear propagation resistance (tearing strength) • Good self-damping • Equipped with protection to hydrolysis • Resistant to aging • Only relatively usable for slipping functions • Material with rubber-elastic properties for highest mechanical load in machine and apparatus construction.

• Excellent chemical resistance to oils, good chemical resistance to petrols, of limited resistance to acids and alkalis.

• Resistant to ozone and UV radiation. ​

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

• Material: PUR (polyurethane) • Colour: brown • Shore hardness A: 90° ±5° (DIN 53505) • Temperature range: -10 to +60 °C • Specific features: high tearing strength, fitted with protection to hydrolysis • Density: 1.25 g/cm3 (DIN 53479) • Elongation at break: 600 % (DIN 53504) • Tearing strength: 48 MPa (DIN 53504) • Abrasion: 32 mm3 (DIN 53516) • Tear propagation resistance: 45 N/mm (DIN 53507) • Compression set: 20 % at +70 °C / 24 h • Insert: none • Tolerance: DIN 7715 T5 P3 Item ​ 300094 300095 300096 300097 300098 300099 300100 300101 300103 300104 300105 300106 300107 300108 300109

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

71.00 75.00 79.00 89.00 101.00 112.00 132.00 153.00 135.00 138.00 158.00 185.00 211.00 249.00 298.00

Vulkollan®-Plate - Shore 70° Application area

• Roller covering, drive and bearing elements, damping elements, coupling elements, spring elements, sealings

Product specification

• High-performance polyurethane elastomer • Constant elastomer quality due to closely specified quality control • Excellent mechanical wear resistance • Very good resistance to abrasion • Remarkable elasticity over the complete hardness range • Good tear propagation resistance • High self-damping, low compression set • Only relatively suitable for slipping functions • Free of plasticizers • Very good resistance to ozone, UV, and high-energy radiation • Good resistance to weather and aging • Good resistance to many oils, fats, petrols, and different solvents ​

Technical specification

• Material: PUR (Vulkollan® D 15); PUR (polyester polyol and naphthylene-1,5-diisocyanate (Desmodur 15)) as well as with additional, special chain elongators • Colour: natural • Shore hardness A: 70° ±5° (DIN 53505) • Temperature range: -25 to +80 °C • Density: 1.24 g/cm3 (DIN 53479) • Tearing strength: 40 MPa (DIN 53504) • Elongation at break: 620 % (DIN 53504) • Tension: at 100 % elongation: 3 MPa, at 300 % elongation: 7 MPa • Tear propagation resistance: 25 N/mm (DIN 53507) • Abrasion: 50 mm2 (DIN 53516) • Compression set: at +72 °C / 24 h: 18 %, at +23 °C / 72 h: 10 % • Rebound elasticity: 45 % Item ​ 300757 300758 300759 300760 300761 300762 300763 300764 300765 300766 300767 300768 300769 300770 300771 300772

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 0.5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

100.00 111.00 136.00 156.00 182.00 197.00 228.00 259.00 192.00 118.00 282.00 305.00 343.00 361.00 463.00 576.00

Vulkollan®-Plate - Shore 82° Application area

• Roller covering, drive and bearing elements, damping elements, coupling elements, spring elements, sealings

Product specification

• High-performance polyurethane elastomer • Constant elastomer quality due to closely specified quality control • Excellent mechanical wear resistance • Very good resistance to abrasion • Remarkable elasticity over the complete hardness range • Good tear propagation resistance • High self-damping • Low compression set • Only relatively suitable for slipping functions • Free of plasticizers • Very good resistance to ozone, UV, and high-energy radiation • Good resistance to weather and aging • Good resistance to many oils, fats, petrols, and different solvents

Technical specification

• Material: PUR (Vulkollan® D 15); PUR (polyester polyol and naphthylene-1,5-diisocyanate (Desmodur 15) as well as with additional, special chain elongators • Colour: natural • Shore hardness A: 82° ±5° (DIN 53505) • Density: 1.25 g/cm3 (DIN 53479)

THOMAPLAST® II - 2015 43

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

• Temperature range: -15 to +80 °C • Tearing strength: 46 MPa (DIN 53504) • Elongation at break: 650 % (DIN 53504) • Tear propagation resistance: 40 N/mm (DIN 53507) • Abrasion: 32 mm3 (DIN 53516) • Compression set: 18 % at +70 °C / 24 h

​

Item ​ 300773 300774 300775 300776 300777 300778 300779 300780 300781 300782 300783 300784 300785 300786 300787 300788

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 0.5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

100.00 111.00 136.00 156.00 182.00 197.00 228.00 259.00 192.00 118.00 282.00 305.00 343.00 361.00 463.00 576.00

Vulkollan®-Plate - Shore 90° Application area

• Roller covering, drive and bearing elements, damping elements, coupling elements, spring elements, sealings

Product specification

• High-performance polyurethane elastomer • Constant elastomer quality due to closely specified quality control • Excellent mechanical wear resistance • Very good resistance to abrasion • Remarkable elasticity over the complete hardness range • Good tear propagation resistance • High self-damping • Low compression set • Only relatively suitable for slipping functions • Free of plasticizers • Very good resistance to ozone, UV, and high-energy radiation • Good resistance to weather and aging • Good resistance to many oils, fats, petrols, and different solvents

44 THOMAPLAST® II - 2015

• Material: PUR (Vulkollan® D 15); PUR (polyester polyol and naphthylene-1,5-diisocyanate (Desmodur 15) as well as with additional, special chain elongators • Colour: natural • Shore hardness A: 90° ±5° (DIN 53505) • Density: 1.26 g/cm3 (DIN 53479) • Temperature range: -25 to +80 °C • Tearing strength: 40 MPa (DIN 53504) • Elongation at break: 660 % (DIN 53504) • Tension: at 100 % elongation: 8 MPa at 300 % elongation: 16 MPa • Tear propagation resistance: 55 N/mm (DIN 53507) • Abrasion: 32 mm2 (DIN 53516) • Compression set: at +70 °C / 24 h: 20 % at +23 °C / 72 h: 12 % • Rebound elasticity: 55 % ​

Item ​ 300789 300790 300791 300792 300793 300794 300795 300796 300797 300798 300799 300800 300801 300802 300803 300804

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 0.5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

105.00 119.00 146.00 167.00 187.00 202.00 238.00 264.00 126.00 218.00 251.00 284.00 323.00 364.00 476.00 591.00

THOMAPLAST®-PVC Plate - Shore 70° Product specification

• Good resistance to aging • Good mechanical stability, plasticized and flexible • Good dielectrical properties • Low tearing strength • Antiadhesive surface • Moderate flame-resistance • Low temperature resistance • Limited resistance to oils, acids and alkalis • Not stable to petrol and its derivatives

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

• Tearing strength: 20 MPa • Water absorption: 0.8 % (DIN 53495) • Dielectric strength: 25 KV/mm (DIN 53481) • Insert: none • Special features: UV-resistant • Tolerance: DIN ISO 3302-1 E2

• Material: PVC (polyvinyl chloride) • Colour: natural • Shore hardness A: 70° ±5° (DIN 53505) • Temperature range: -35 to +50 °C • Density: 1.4 g/cm3 • Elongation at break: 350 % • Tearing strength: 7.0 MPa • Insert: none • Special features: sulfur-free • Tolerance: DIN ISO 3302-1 E2

​

Item ​ 19940 19941 19942 19943 19944 19945 19946 19947 19948 19949 19950 19951 19952 19953 19954 19955 19956 19957

​

Item ​ 19924 19925 19926 19927 19928 19929 19930 19931 19932 19933 19934 19935 19936 19937 19938 19939

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

61.00 68.00 72.00 79.00 83.00 94.00 112.00 122.00 101.00 112.00 123.00 143.00 150.00 167.00 194.00 224.00

THOMAPLAST®-PVC Plate - Shore 80°

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 6 0.5 1 1.5 2 2.5 3 4 5 6

600 x 500 600 x 500 600 x 500 600 x 500 600 x 500 600 x 500 600 x 500 600 x 500 600 x 500 1.500 x 1,200 1.500 x 1,200 1.500 x 1,200 1.500 x 1,200 1.500 x 1,200 1.500 x 1,200 1.500 x 1,200 1.500 x 1,200 1.500 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

65.00 72.00 76.00 79.00 83.00 86.00 90.00 99.00 106.00 106.00 130.00 132.00 150.00 162.00 171.00 193.00 206.00 242.00

THOMAPLAST®-SBR Plate - Shore 50° Product specification

• Medium tearing strength • Very good impact elasticity • Very good elastic behavior • Outstanding abrasion resistance • High cohesive friction • Good resistance to aging • Limited resistance to alkalis • Not resistant to mineral oils, solvents, fuels, and acids • Chemical features: SBR is a synthetic rubber with properties similar to natural rubber.

Copolymers made of SBR base on butadiene rubber and have a styrene content of 10 % to 35 %. With increasing styrene component, the properties of SBR change to limited elasticity. ​

Product specification

• Good resistance to aging • Very good mechanical stability • Good dielectrical properties • Good tearing strength • Antiadhesive surface • Moderate flame-resistance • Good temperature resistance • Limited resistance to acids and alkalis • Not stable to petrol and oil

Technical specification

• Material: PVC (polyvinyl chloride) • Colour: crystal-clear • Shore hardness A: 80° ±5° (DIN 53505) • Temperature range: -30 to +50 °C • Density: 1.23 g/cm3 • Elongation at break: 340 %

THOMAPLAST® II - 2015 45

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

Technical specification

• Material: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 50° ±5° (DIN 53505) • Temperature range: -30 to +70 °C • Density: 1.4 g/cm3 • Elongation at break: 300 % • Tearing strength: 3 MPa • Insert: none • Tolerance: DIN ISO 3302-1 E2 Item ​ 19730 19731 19732 19733 19734 19735 19736 19737 19738 19739 19740 19741 19742 19743 19744 19745 301016 301017 301018 301025 301026 301027

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6 8 10 12 8 10 12

600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 250 x 350 250 x 350 250 x 350 500 x 700 500 x 700 500 x 700

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

54.00 58.00 61.00 66.00 68.00 76.00 79.00 86.00 83.00 100.00 104.00 110.00 117.00 137.00 140.00 151.00 121.00 136.00 146.00 210.00 223.00 248.00

THOMAPLAST -SBR Plate - Shore 70° ®

Product specification

• Limited tearing strength, medium impact elasticity • Good elastic behavior, good abrasion resistance • Medium cohesive friction • Good resistance to aging • Chemical features: SBR is a synthetic rubber with properties similar to natural rubber.

Copolymers made of SBR base on butadiene rubber and have a styrene content of 10 % to 35 %. With increasing styrene component, the properties of SBR change to limited elasticity.

SBR is often mixed with NR, an ideal material symbiosis making use of the outstanding elastic behavior of NR.

Technical specification

• Material: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 70° ±10° (DIN 53505) • Temperature range: -30 to +70 °C • Density: 1.45 g/cm3 • Tearing strength: 4 MPa (DIN 53504) • Elongation at break: 150 % (DIN 53504) • Abrasion: 300 mm2 (DIN 53516) • Insert: none • Tolerance: DIN ISO 3302-1 E2 ​

46 THOMAPLAST® II - 2015

Item ​ 19763 19764 19765 19766 19767 19768 19769 19770 19771 19772 19774 19775 19776 19777 19778 19779 19780 19781 19782 19783

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 8 10 1 1.5 2 2.5 3 4 5 6 8 10

600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

50.00 50.00 50.00 53.00 56.00 59.00 62.00 65.00 86.00 94.00 86.00 86.00 86.00 86.00 90.00 97.00 110.00 113.00 145.00 166.00

THOMAPLAST®-SBR Plate - Shore 85° Product specification

• Very high abrasion resistance • Medium elastic behavior • Low tearing strength • Good resistance to weather • Poor resistance to mineral oils, fuels, solvents, acids, and alkalis • Chemical features: SBR is a synthetic rubber with properties similar to natural rubber.

Copolymers made of SBR base on butadiene rubber and have a styrene content of 10 % to 35 %. With increasing styrene component, the properties of SBR change to limited elasticity.

Technical specification

• Material: SBR (styrene-butadiene rubber) • Colour: black • Shore hardness A: 85° ±5° (DIN 53505) • Temperature range: -30 to +70 °C • Density: 1.6 g/cm3 • Elongation at break: 100 % • Tearing strength: 3 MPa • Compression set: 21 % at +23 °C / 72 h • Insert: none • Tolerance: DIN ISO 3302-1 E2 ​

Semi-Finished Products - Elastomers Item ​ 19804 19805 19806 19807 19808 19809 19810 19811 19812 19813 19814 19815 19816 19817

Plates (0.1 - 60 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 3 4 5 6 1 1.5 2 3 4 5 6

600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1

51.00 54.00 58.00 61.00 68.00 72.00 79.00 78.00 86.00 95.00 101.00 107.00 124.00 138.00

Item ​ 19746 19747 19748 19749 19750 19751 19752 19753 19754 19755 19756 19757 19758 19759 19760 19761

THOMAPLAST®-SBR Food Plate - Shore 65° Product specification

• Food quality • Very high tearing strength • Outstanding elongation at break • Very good impact elasticity • Good elastic behavior • Outstanding abrasion resistance • High cohesive friction • Good resistance to aging • Good resistance to acids and alkalis • Not resistant to mineral oils, solvents, and fuels • Chemical features: SBR is a synthetic rubber with properties similar to natural rubber.

Copolymers made of SBR base on butadiene rubber and have a styrene content of 10 % to 35 %. With increasing styrene component, the properties of SBR change to limited elasticity.

SBR is often mixed with NR, an ideal material symbiosis making use of the outstanding elastic behavior of NR.

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 4 5 6 1 1.5 2 2.5 3 4 5 6

700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 700 x 700 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400 1.400 x 1.400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

61.00 75.00 79.00 86.00 89.00 108.00 122.00 132.00 152.00 134.00 142.00 151.00 159.00 194.00 229.00 262.00

THOMAPLAST®-Silicone Plate - Shore 55° Technical specification

• Material: silicone (silicone rubber) • Colour: transparent • Shore hardness A: 55° ±5° (DIN 53505) • Temperature range: -60 to +200 °C, for a short time +260 °C • Specific features: relatively resistant to most organic solvents, chemically neutral, non-toxic, ozone-resistant, physiologically safe ​

Technical specification

• Material: SBR (styrene-butadiene rubber) • Colour: white • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -30 to +70 °C • Density: 1.43 g/cm3 • Specific features: low-sulfur • Elongation at break: 380 % • Tearing strength: 8 MPa • Compression set: 40 % at +70 °C / 22 h • Insert: none • Regulations: KTW-approval (approved for drinking water, food quality)

Item ​ 40265 40266 40267 40268 40269

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 2 3 4 5

600 x 550 600 x 550 600 x 550 600 x 550 600 x 550

1 1 1 1 1

108.00 153.00 208.00 236.00 260.00

​

THOMAPLAST®-Silicone Plate - Shore 60° Product specification

• Very good resistance to aging and weather • Extremely high temperature resistance • Excellent resistance to heat and hot air • Very good flexibility in cold • Sulfur-free • Very good dielectrical properties • Highest gas permeability • Antiadhesive (repellent) surface • Good elastic properties with optimal elongation at break

THOMAPLAST® II - 2015 47

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

• Moderate mechanical stability • Mean tearing strength • Good chemical resistance to weak acids and alkalis as well as vegetable and animal oils, and glycols.

• Limited chemical resistance to petrol, mineral oils, and solvents (swelling).

• Chemical features: Modifying the SI basic type with vinyl groups produces a silicone rubber modification (methyl vinyl silicone quality) with improved properties.

Improvement of flexibility in the cold (up to -100 °C) is achieved by modification with phenyl groups.

The superior physiological properties allow the production of sterile parts for medical engineering and components for food processing technology.

In the long-term experiment a slight hardening occurs at dry heat.

Technical specification

• Material: silicone (silicone rubber) • Colour: red-brown • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +230 °C • Density: 1.18 g/cm3 • Elongation at break: 250 % (DIN 53504) • Tearing strength: 5 MPa (DIN 53504) • Compression set: 30 % at +150 °C / 24 h • Insert: none • Tolerance: DIN ISO 3302-1 E2 ​

THOMAPLAST®-Silicone Food Plate - Shore 40° Product specification

• Suitable for food • Very good resistance to aging and weather • Very good resistance to ozone and oxygen • Outstanding temperature resistance • Sulfur-free • Excellent resistance to heat and hot air • Very good flexibility in cold • Very good dielectrical properties • Highest gas permeability • Very good physiological properties (suitable for food) • Antiadhesive (repellent) surface • Outstanding elastic properties with optimal elongation at break • Moderate mechanical stability • Mean tearing strength • Good chemical resistance to weak acids and alkalis as well as vegetable and animal oils, and glycols.

• Limited chemical resistance to petrol, mineral oils, and solvents (swelling).

• Chemical features: Modifying the SI basic type with vinyl groups produces a silicone rubber modification (methyl vinyl silicone quality) with improved properties.

Improvement of flexibility in the cold (up to -100 °C) is achieved by modification with phenyl groups.

The superior physiological properties allow the production of sterile parts for medical engineering and components for food processing technology.

In the long-term experiment a slight hardening occurs at dry heat.

Technical specification

Item ​ 333891 19848 19849 19850 19851 19852 19853 19854 19855 333892 19856 19857 19858 19859 19860 19861 19862 19863

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.3 0.5 1 1.5 2 3 4 5 6 0.3 0.5 1 1.5 2 3 4 5 6

500 x 500 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,000 x 1,200 1,000 x 1,200 1,000 x 1,200 1,000 x 1,200 1,000 x 1,200 1,000 x 1,200 1,000 x 1,200 1,000 x 1,200 1,000 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

78.00 102.00 112.00 144.00 158.00 197.00 230.00 255.00 298.00 129.00 188.00 225.00 277.00 303.00 395.00 448.00 506.00 603.00

48 THOMAPLAST® II - 2015

• Material: silicone (silicone rubber) • Colour: transparent • Shore hardness A: 40° ±5° (DIN 53505) • Temperature range: -60 to +200 °C • Density: 1.15 g/cm3 • Elongation at break: 350 % • Tearing strength: 5 MPa • Compression set: 50 % at +150 °C / 70 h • Insert: none • Tolerance: DIN ISO 3302-1 E2 • Regulations: FDA §177.2600 ​

Item ​ 333767 19864 19865 19866 19867 19868

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 3 4

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500

1 1 1 1 1 1

185.00 108.00 129.00 143.00 172.00 203.00

Semi-Finished Products - Elastomers Item ​ 19869 333768 19871 19872 19873 19874 19875 19876

Plates (0.1 - 60 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

5 0.5 1 1.5 2 3 4 5

500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1

224.00 250.00 207.00 238.00 264.00 326.00 385.00 423.00

• Regulations: FDA §177.2600, USP XXI, DAB 10, BfR XV Item ​ 333893 19878 19879 19880 19881 19882 19883 19884 19885 333894 19886 19887 19888 19889 19890 19891 19892 19893

THOMAPLAST®-Silicone Food Plate - Shore 60° Product specification

• Suitable for food • Very good resistance to aging and weather, to ozone and oxygen • Sulfur-free • Outstanding temperature resistance • Excellent resistance to heat and hot air • Very good flexibility in cold, dielectrical properties • Highest gas permeability • Very good physiological properties • Antiadhesive (repellent) surface • Outstanding elastic properties with optimal elongation at break • Moderate mechanical stability • Mean tearing strength • Good chemical resistance to weak acids and alkalis as well as vegetable and animal oils, and glycols.

• Limited chemical resistance to petrol, mineral oils, and solvents (swelling).

• Chemical features: Modifying the SI basic type with vinyl groups produces a silicone rubber modification (methyl vinyl silicone quality) with improved properties.

Improvement of flexibility in the cold (up to -100 °C) is achieved by modification with phenyl groups.

The superior physiological properties allow the production of sterile parts for medical engineering and components for food processing technology.

In the long-term experiment a slight hardening occurs at dry heat. ​

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.3 0.5 1 1.5 2 3 4 5 6 0.3 0.5 1 1.5 2 3 4 5 6

500 x 500 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600 1,000 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200 1,200 x 1,200

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

86.00 112.00 135.00 148.00 170.00 218.00 253.00 286.00 299.00 144.00 195.00 254.00 289.00 337.00 446.00 497.00 574.00 664.00

THOMAPLAST®-Silicone Sheet (High-Temperature) Shore 60° Product specification

• Outstanding temperature resistance • Excellent resistance to hot air • Very good flexibility in cold • Very good resistance to ozone, aging, and weather • Good elastic behavior • Antiadhesive (repellent) surface • Good chemical resistance (individual testing recommended)

Technical specification

• Material: silicone (silicone rubber) • Colour: grey • Shore hardness A: 60° ±5° • Density: 1.16 ±0.03 g/cm3 (DIN 53479) • Temperature range: -50 to +250 °C, for a short time +300 °C • Sterilization: hot air (+200 °C), steam (+136 °C) • Tensile strength: >4.0 MPa • Elongation at break: >190 % (DIN 53504-S2) • Tolerance: ISO 3302 M2 ​

Technical specification

• Material: silicone (silicone rubber) • Colour: translucent • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +200 °C • Density: 1.15 g/cm3 • Elongation at break: 350 % • Tearing strength: 5 MPa • Compression set: 50 % at +150 °C / 70 h • Volume resistivity: 1015 Ohm x cm • Insert: none • Tolerance: DIN ISO 3302-1 E2

Item ​ 19169 19171

Thickness mm

Dimensions mm

Unit piece

Price EURO

8 10

500 x 500 500 x 500

1 1

225.00 266.00

THOMAPLAST® II - 2015 49

Semi-Finished Products - Elastomers

Plates (0.1 - 60 mm)

THOMAPLAST®-Silicone Sheet with Glass Fabric Insert - Shore 60° Application area

Item ​

Thickness of carrier layer mm

Thickness of coating mm

Dimensions mm

EURO

1.3 1.5 2 2 3 3 3 3 4 4

0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2

300 x 425 300 x 210 150 x 150 300 x 300 150 x 150 300 x 210 300 x 300 300 x 420 150 x 150 300 x 300

164.00 103.00 49.00 113.00 57.00 141.00 133.00 228.00 67.00 149.00

19181 19182 81270 81266 81271 19186 81267 19185 81272 81268

• Sealing technology, insulation technology, damping technology, electrical engineering, heating engineering, industrial engineering

Product specification

• Outstanding temperature resistance • Excellent resistance to hot air • Very good flexibility in cold • Very good resistance to ozone, aging, and weather

Technical specification

• Material: silicone (silicone rubber) • Colour: red-brown • Shore hardness A: 60° ±5° • Design: with glass fabric insert, type V3-52-A • Temperature range: -50 to +200 °C • Sterilization: hot air (+200 °C), steam (+136 °C) • Tolerance: ISO 3302.1-ST2

Price

Foam Rubbers

​

THOMAPLAST®-Foam Rubber Sheet made of CR without skin Product specification

• Remarkable temperature resistance, also for a short time • Excellent resistance to weather, aging, and ozone • Good mechanical stability • High flame resistance

Technical specification Item ​ 340373 340374 340375

Thickness mm

Dimensions mm

Unit piece

Price EURO

3 3 3

1,200 x 500 1,200 x 1,000 1,200 x 3.000

1 1 1

180.00 324.00 582.00

THOMAPLAST®-Silicone Sheet with PTFE Coat Product specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 15° ±3° (DIN 53505) • Temperature range: -40 to +110 °C • Elongation: 450 - 600 % • Density: 600 - 1,000 kg/m3 • Compression set: at +23 °C / 72 h: approx. 10 %, at +70 °C / 22 h: approx. 22 % • Compressibility: 150 ±60 kPa at 25 % deformation • Inflammability: self-extinguishing • Design: without skin on both sides, but closed-cell and mixed-cell ​

• Solidly bonded two-sheet-combination made of silicone and PTFE. • Ideal for punching of sealings for chromatography, biotechnology, fermentation as well as for pharmaceutical packaging industry.

Technical specification

• Material: silicone (silicone rubber), PTFE (polytetrafluoroethylene) • Colour SI: red • Colour PTFE: white • Shore hardness A: 50° ±5° (DIN 53505) • Temperature range: -60 to +180 °C • Thickness of PTFE coating: 0.2 mm • Tolerance: ISO 3302 M2 ​

Item ​ 332210 332211 332212 332213 332214 332215 332216

50 THOMAPLAST® II - 2015

Thickness Tolerance mm mm 2 2 2 3 3 3 5

±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.7

Dimensions mm

Unit piece

Price EURO

250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250

1 1 1 1 1 1 1

66.00 130.00 260.00 70.00 142.00 286.00 82.00

Semi-Finished Products - Foam Rubbers Item ​ 332217 332218 332219 332220 3322211

Thickness Tolerance mm mm 5 5 8 8 8

±0.7 ±0.7 ±0.8 ±0.8 ±0.8

Plates (0.1 - 60 mm)

Dimensions mm

Unit piece

Price EURO

THOMAPLAST®-Foam Rubber Sheet made of EPDM

500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000

1 1 1 1 1

162.00 324.00 88.00 178.00 356.00

• Cell structure closed-cell • Without skin on both sides • Very good volume compression • Remarkable deformability • Very good resistance to weather and aging • Very good cold and thermal resistance • Good chemical resistance to many alkalis, acids, and polar solvents; poor resistance to mineral oils

THOMAPLAST®-Foam Rubber Sheet made of CR with skin

Product specification

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber) • Colour: black • Temperature range: -40 to +120 °C • Density: 0.14 g/cm3 • Thickness tolerance: DIN 7715 T5 P3 • Design: closed-cell, without skin

Product specification

• Excellent resistance to weather, aging, and ozone • Remarkable temperature resistance, also for a short time!

• Good mechanical stability • High flame resistance

​

Technical specification

• Material: CR (chloroprene rubber) • Colour: light-beige • Temperature range: -40 to +110 °C, for a short time +140 °C • Density: 700 to 1000 kg/m3 • Compression set: at +20 °C: approx. 10 % (DIN 53572), at +70 °C: approx. 22 % (DIN 53572) • Applied pressure at load 1 kP/cm2: approx. 25 - 35 % • Inflammability: self-extinguishing • Design: with skin on both sides and fine pattern, but open-pored ​

Item ​ 332105 332106 332107 332108 332109 332110 332111 332112 332113 332114 332115 332116 332117 332118 332119 332120 332121 332122 332123 332124 332125 332126 332127 332128 332129 332130 332131 332132 332133 332134

Thickness Tolerance mm mm 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 15 15 15 20 20 20

±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.9 ±0.9 ±0.9 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0

Dimensions mm

Unit piece

Price EURO

250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

66.00 130.00 260.00 70.00 142.00 286.00 72.00 146.00 294.00 76.00 154.00 310.00 84.00 168.00 336.00 84.00 170.00 342.00 86.00 174.00 348.00 90.00 180.00 362.00 96.00 192.00 382.00 106.00 212.00 424.00

Item ​ 300855 300856 300857 300858 300859 300860 300861 300862 300863 300864 300865 300866 300867 300868 300869 300870 300871 300872 300873 300874 300875 300876 300877 300878 300879 300880 300881 300882

Thickness mm

Dimensions mm

Unit piece

Price EURO

2 3 4 5 6 8 10 15 20 30 2 3 4 5 6 8 10 15 20 30 2 3 4 5 6 8 10 15

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 1,000 500 x 1,000 500 x 1,000 500 x 1,000 500 x 1,000 500 x 1,000 500 x 1,000 500 x 1,000 500 x 1,000 500 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

36.00 47.00 54.00 59.00 67.00 77.00 93.00 110.00 113.00 139.00 62.00 80.00 90.00 100.00 116.00 139.00 144.00 156.00 164.00 185.00 98.00 123.00 149.00 164.00 179.00 192.00 225.00 277.00

THOMAPLAST® II - 2015 51

Semi-Finished Products - Foam Rubbers Item ​

Plates (0.1 - 60 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

20 30

1,000 x 1,000 1,000 x 1,000

1 1

310.00 389.00

300883 300884

THOMAPLAST®-High-Chem Foam Rubber Sheet made of FPM Product specification

• High-grade copolymer of fluorinated hydrocarbons • Cell structure with skin on all sides • Very good chemical resistance to most organic and inorganic media • Very good cold resistance • Excellent heat resistance • Excellent resistance to ozone, oxygen, aging, and weather • Good flame resistance, self-extinguishing • High mechanical stability • Excellent deformation bridging • Very long lifetime even at highest compression strain • Gas-tight sealing already at low surface pressure

Technical specification

• Material: FPM (fluorinated rubber) • Colour: black • Shore hardness A: 25° ±5° (DIN 53505) • Temperature range: -15 °C to +200 °C, for a short time +300 °C • Density: 0.8 g/cm3 • Tension: 0.9 N/mm2 (DIN 53504) • Elongation at break: 200 % (DIN 53504) • Change at heating: -1.8 % • Design: extruded sheets, with skin on all sides

Item ​ 301262 301263 301264 301265

Thickness Tolerance mm mm 6 8 8 8

±0.8 ±1.0 ±1.0 ±1.0

Dimensions mm

Unit piece

Price EURO

130 x 1,000 100 x 300 115 x 500 115 x 1,000

1 1 1 1

681.00 205.00 411.00 899.00

THOMAPLAST®-Foam Rubber Sheet made of NR Product specification

• Very good elastic properties • Very good deformability, combined with high volume compressibility • High impact resilience • High tearing strength • Excellent abrasion resistance • Limited resistance to acids and alkalis; poor resistance to mineral oils, fuels, and organic solvents • Not resistant to weather and oils

Technical specification

• Material: NR (natural rubber) • Colour: dark-grey • Density: 550 - 850 kg/m3 • Temperature range: -40 to +70 °C • Elongation at break: 250 - 400 % • Compression set: 15 % at +23 °C / 22 h / 25 % (DIN 53517) • Tolerance: DIN ISO 3302-1 E3 • Design: mixed-cell, with closed skin, pattern on both sides ​

​

Item ​ Item ​ 301248 301249 301250 3012511 301251 301252 301253 301254 301255 301256 301257 301258 301259 3012601 301260 301261

Thickness Tolerance mm mm 2 2 2 3 3 3 3 4 4 4 5 5 5 6 6 6

​ ​ ​ ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8

52 THOMAPLAST® II - 2015

Dimensions mm

Unit piece

Price EURO

140 x 100 140 x 500 140 x 1,000 100 x 100 100 x 300 150 x 500 150 x 1,000 150 x 100 150 x 500 150 x 1,000 150 x 100 300 x 300 150 x 1,000 100 x 100 300 x 100 300 x 300

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

39.00 86.00 155.00 45.00 95.00 115.00 180.00 106.00 212.00 399.00 131.00 262.00 574.00 75.00 155.00 311.00

332168 332169 332170 332171 332172 332173 332174 332175 332176 332177 332178 332179 332180 332181 332182 332183 332184 332185 332186

Thickness Tolerance mm mm 2 2 2 2.5 2.5 2.5 3 3 3 4 4 4 5 5 5 6 6 6 8

±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.8

Dimensions mm

Unit piece

Price EURO

250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

38.00 74.00 148.00 45.00 90.00 180.00 48.00 94.00 180.00 50.00 98.00 198.00 52.00 102.00 204.00 54.00 108.00 214.00 60.00

Semi-Finished Products - Foam Rubbers Item ​ 332187 332188 332189 332190 332191 332192 332193 332194 332195 332196 332197 332198 332199 332200 332201 332202 332203 332204 332205 332206 332207 332208 332209

Thickness Tolerance mm mm 8 8 10 10 10 12 12 12 15 15 15 20 20 20 25 25 25 30 30 30 40 40 40

±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.9 ±0.9 ±0.9 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.5 ±1.5 ±1.5 ±2.0 ±2.0 ±2.0

Plates (0.1 - 60 mm)

Dimensions mm

Unit piece

Price EURO

500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

120.00 240.00 64.00 128.00 254.00 66.00 132.00 264.00 76.00 152.00 298.00 84.00 168.00 336.00 88.00 175.00 350.00 94.00 188.00 376.00 98.00 198.00 396.00

• Compressive stress: at 20 %: 0.12 N/mm2 (DIN 53504) at 30 %: 0.18 N/mm2 (DIN 53504) at 40 %: 0.25 N/mm2 (DIN 53504) at 50 %: 0.38 N/mm2 (DIN 53504) at 60 %: 0.62 N/mm2 (DIN 53504) at 70 %: 1.17 N/mm2 (DIN 53504) • Fire protection class: B2, normally inflammable (DIN 4102) Item ​ 332286 332287 332288 332289 332290 332291 332292 332293 332294 332295 332296 332297 332298 332299 332300 332301 332302 332303

THOMAPLAST®-Foam Rubber Sheet made of PUR Product specification

• Extremely high volume compressibility • Good impact resilience and tear propagation resistance • Good resistance to weather and aging • Remarkable rebound elasticity • Good elongation at break • Good deformability • Good resistance to gasoline and oil; limited resistance to alkalis, not recommended for acids ​

Technical specification

• Material: PUR (polyurethane, cellular, RG 350) • Colour: light • Temperature range: -20 to +80 °C • Density: 0.35 g/cm3 • Tear propagation resistance: 8 kN/m (DIN 53515) • Compression set: 2.5 % at +22 °C / 70 h • Impact resilience: 60 % (DIN53512) • Elongation at break: 390 % (DIN 53504)

Thickness Tolerance mm mm 1 1 2 2 2.5 2.5 3 3 4 4 5 5 6 6 8 8 10 10

Dimensions mm

Unit piece

Price EURO

250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

54.00 96.00 64.00 120.00 66.00 130.00 72.00 138.00 78.00 152.00 88.00 172.00 94.00 184.00 98.00 192.00 112.00 216.00

±0.2 ±0.2 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.6 ±0.7 ±0.7 ±0.7 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8

THOMAPLAST®-Spring Elements made of PUR (cellular) Application area

• Attenuation layer with large deflection • Permanently elastic intermediate layer for sandwich constructions • Spring elements, buffer, damping elements in the shop, in the laboratory, pilot plant, and factory

General product specification

• High tensile strength and notch impact strength • Extremely high volume compressibility • High tearing strength • Good behavior in cold • Good resistance to aging and weather • Low compression set • Good oil resistance, limited resistance to gasoline, not recommended to acids and bases • This quality is a microcellular polyurethane elastomer. The cell structure is formed in the foaming process without blowing agent, free of pollutants.

• All conventional elastomers are not volume compressible and have to be built in in such a way that an unlimited deformation to the side is possible at deflection. If this is not guaranteed, only very limited spring deflections can be realized.

• The material cannot be defined using the shore hardness A. In this case, the differentiation is made by density.

General technical specification

• Material: PUR (cellular polyurethane elastomer) • Temperature range: -20 to +60 °C • Density: 0.35 g/cm3 or 0.45 g/cm3 or 0.55 g/cm3 • Specific features: free of asbestos • Flammability rating: normal flammability, class 2

​

THOMAPLAST® II - 2015 53

Semi-Finished Products - Foam Rubbers

Plates (0.1 - 60 mm)

THOMAPLAST®-Spring Element Plate made of PUR (cellular) - low density Technical specification

Item ​ 302412 302413 302414 302415 302416 302417 302418 302419 302420 302421 302422 302423 302424 302425 302426 302427 302428 302429 302430 302431

• Material: PUR (cellular polyurethane elastomer) • Density: 0.35 g/cm3 (DIN EN ISO 845) • Tensile strength: >3.0 N/mm2 (DIN EN ISO 1798) • Elongation at break: >330 % (DIN EN ISO 1798) • Compression set: <7.0 % at +70 °C / 22 h / 50 % (DIN EN ISO 1856) ​

Item ​ 302392 302393 302394 302395 302396 302397 302398 302399 302400 302401 302402 302403 302404 302405 302406 302407 302408 302409 302410 302411

Thick- Tolerance Spring Dimensions Unit Price ness deflection mm mm mm mm piece EURO 1 1 2 2 3 3 4 4 5 5 6 6 8 8 10 10 15 15 20 20

±0.4 ±0.4 ±0.4 ±0.4 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.8 ±0.8 ±1.0 ±1.0

0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 2.8 2.8 3.5 3.5 5.25 5.25 7 7

250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

34.00 51.00 50.00 76.00 66.00 104.00 79.00 124.00 95.00 150.00 107.00 166.00 131.00 201.00 148.00 221.00 191.00 271.00 208.00 297.00

THOMAPLAST®-Spring Element Plate made of PUR (cellular) - medium density Technical specification

• Material: PUR (cellular polyurethane elastomer) • Density: 0.45 g/cm3 • Tensile strength: >4.0 N/mm2 (DIN 57571) • Elongation at break: >400 % (DIN EN ISO 1798) • Tearing strength: 12.0 N/mm (DIN 53515) • Rebound elasticity: 55 % (DIN 53512) • Compression set: 5.0 % at +70 °C / 22 h / 50 % (DIN 53572) ​

54 THOMAPLAST® II - 2015

Thick- Tolerance Spring Dimensions Unit Price ness deflection mm mm mm mm piece EURO 1 1 2 2 3 3 4 4 5 5 6 6 8 8 10 10 15 15 20 20

±0.4 ±0.4 ±0.4 ±0.4 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.6 ±0.8 ±0.8 ±0.8 ±0.8 ±1.0 ±1.0

0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 2.8 2.8 3.5 3.5 5.25 5.25 7 7

250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

35.00 56.00 55.00 88.00 78.00 125.00 99.00 155.00 113.00 176.00 131.00 200.00 160.00 234.00 169.00 241.00 230.00 319.00 277.00 369.00

THOMAPLAST®-Spring Element Plate made of PUR (cellular) - high-density Technical specification

• Material: PUR (cellular polyurethane elastomer) • Density: 0.65 g/cm3 • Static load: 0.92 N/mm2 ​

Item ​ 302432 302433 302434 302435 302436 302437 302438 302439 302440 302441 302442 302443 302444

Thick- Tolerance Spring Dimensions Unit Price ness deflection mm mm mm mm piece EURO 1 1 2 2 3 3 4 4 5 5 6 6 8

±0.4 ±0.4 ±0.4 ±0.4 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6

0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 2.8

250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250

1 1 1 1 1 1 1 1 1 1 1 1 1

42.00 68.00 67.00 107.00 92.00 145.00 116.00 178.00 142.00 219.00 150.00 224.00 180.00

Semi-Finished Products - Foam Rubbers Item ​ 302445 302446 302447 302448 302449 302450 302451

Plates (0.1 - 60 mm)

Thick- Tolerance Spring Dimensions Unit Price ness deflection mm mm mm mm piece EURO 8 10 10 15 15 20 20

±0.6 ±0.8 ±0.8 ±0.8 ±0.8 ±1.0 ±1.0

2.8 3.5 3.5 5.25 5.25 7 7

250 x 500 250 x 250 250 x 500 250 x 250 250 x 500 250 x 250 250 x 500

1 1 1 1 1 1 1

Item ​ 331627 331628 331629 300836 331630 331631 331632 300837 331633 331634 331635 300838 331636 331637 331638 300839 331639 331640 331641 300840 331642 331643 331644 300841 331645 331646 331647 300842 300854 301039

265.00 200.00 277.00 278.00 368.00 332.00 423.00

THOMAPLAST®-Cellular Rubber Plate made of CR Shore 15° Product specification

• Good elastic properties • Good abrasion resistance • Good resistance to weather, aging, and ozone • High flame resistance • Chemically resistant to dilute acids, alkalis, and mineral oils

Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 15° ±3° (DIN 53505) • Density: 0.21 g/cm3 • Temperature range: -30 to +100 °C • Thickness tolerance: DIN 7715 T5 P3 • Design: foamed, closed-cell, without skin ​

Thickness mm

Dimensions mm

Unit piece

Price EURO

6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 15 15 15 15 20 20 20 20 25 25 25 25 30 30 30.5

700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 700 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

112.00 172.00 264.00 121.00 122.00 188.00 288.00 126.00 132.00 202.00 308.00 136.00 148.00 230.00 332.00 159.00 162.00 252.00 388.00 169.00 192.00 298.00 460.00 182.00 210.00 326.00 504.00 197.00 282.00 456.00

THOMAPLAST®-Cellular Rubber Plate made of CR/EPDM - Shore 40° Product specification Item ​ 300831 331615 331616 331617 300832 331618 331619 331620 300833 331621 331622 331623 300834 331624 331625 331626 300835

Thickness mm

Dimensions mm

Unit piece

Price EURO

2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6

350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500 700 x 500 1,000 x 700 1.400 x 1,000 350 x 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

62.00 72.00 110.00 170.00 85.00 86.00 132.00 202.00 95.00 92.00 142.00 220.00 103.00 106.00 162.00 248.00 113.00

• Resistance to aging and weather • Resistance to ozone • Good temperature resistance • Very good mechanical stability • High vacuum compressibility

Technical specification

• Material: CR (chloroprene rubber) • Additive components: EPDM (ethylene-propylene-diene rubber) • Colour: black • Shore hardness A: 40° ±10° (DIN 53505) • Temperature range: -40 to +80 °C, for a short time +100 °C • Density: 175 kg/m3 • Elongation at break: >150 % • Tensile strength: >400 kPa (ISO 1798-97) • Tear strength: >0.5 kN/m (ISO 34-1 (B-a) 94) • Dimensional stability: 2 % after 3 h at +80 °C • Linear shrinkage: 3 % after 7 days at +70 °C • Compression set: at +23 °C / 22 h: 8 %, at +40 °C / 22 h: 23 % • Pressure resistance: 35 - 63 kPa (ASTM D 1056-85) • Water absorption (vacuum): 3.5 % (ASTM D 1056-80) • Design: without skin on both sides, but closed-cell ​

THOMAPLAST® II - 2015 55

Semi-Finished Products - Foam Rubbers Item ​ 332221 332222 332223 332224 332225 332226 332227 332228 332229 332230 332231 332232 332233 332234 332235 332236 332237 332238 332239 332240 332241 332242 332243 332355

Thickness Tolerance mm mm 2 2 2 2.5 2.5 2.5 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10

±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8

Plates (0.1 - 60 mm)

Dimensions mm

Unit piece

Price EURO

250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 2.000 x 1,000 250 x 250 500 x 500 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

30.00 52.00 96.00 32.00 56.00 102.00 34.00 62.00 110.00 40.00 70.00 126.00 44.00 80.00 146.00 50.00 92.00 168.00 58.00 98.00 180.00 62.00 112.00 204.00

THOMAPLAST®-Cellular Rubber Plate made of EPDM - Shore 40° Product specification

• Outstanding elastic behavior, thus excellent deformability • Very good resistance to aging, weather, and ozone • Excellent resistance to heat, cold, hot water, and steam • Flame-resistant • Chemical resistance to glycol brake fluid, many acids and alkalis as well as polar solutions

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber) • Colour: black • Shore hardness A: 40° ±10° (DIN 53505) • Temperature range: -40 to +80 °C, for a short time +100 °C • Elongation at break: >150 % • Tearing strength: 0.5 kN/m • Tensile strength: >400 kPa • Water absorption: 3.5 % • Regulations: approvals according to SAE J 18-79, FMVSS 302, ASTM D 1056-77, AFNOR NF-R 99-211 -80, DBL 5574.10 • Tolerance: DIN ISO 3302-1 E3 • Design: foam rubber, closed-cell ​

56 THOMAPLAST® II - 2015

Item ​ 332049 332050 332051 332052 332053 332054 332055 332056 332057 332058 332059 332060 332061 332062 332063 332064 332065 332066 332067 332068 332069 332070 332071 332072 332073 332074 332075 332076 332077 332078 332079 332080 332081 332082 332083 332084 332085 332086 332087 332088 332089 332090 332091 332092 332093 332094 332095 332096 332097 332098 332099 332100 332101 332102 332103 332104

Thickness mm

Dimensions mm

Unit piece

Price EURO

2 2 2 2 2.5 2.5 2.5 2.5 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 15 15 15 15 20 20 20 20 25 25 25 25 30 30 30 30 40 40 40 40

250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000 250 x 400 400 x 500 500 x 800 800 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

42.00 50.00 62.00 76.00 50.00 62.00 76.00 94.00 56.00 70.00 86.00 108.00 64.00 80.00 100.00 126.00 72.00 88.00 110.00 138.00 78.00 96.00 120.00 150.00 84.00 104.00 130.00 162.00 98.00 124.00 154.00 192.00 102.00 126.00 158.00 198.00 108.00 136.00 170.00 212.00 118.00 146.00 184.00 230.00 124.00 156.00 196.00 244.00 134.00 166.00 208.00 262.00 144.00 180.00 224.00 282.00

Semi-Finished Products - Foam Rubbers

Plates (0.1 - 60 mm)

THOMAPLAST®-Cellular Rubber Plate made of NBR Shore 15°

Item ​ 332158 332159 332160 332161 332162 332163 332164 332165 332166 332167

Product specification

• Excellent rubber-elastic properties • Good resistance to weather and aging • Good thermal resistance • Very good resistance to mineral oils, vegetable and animal oils • Insufficient resistance to solvents, flame-resistant hydraulic fluids, and fuels

Technical specification

• Material: NBR (butadiene-acrylonitrile rubber) • Colour: black • Shore hardness A: 10° - 15° (DIN 53505) • Temperature range: -30 to +90 °C • Density: 150 - 190 kg/m3 • Rebound elasticity: 45 - 55 % • Compression set: 30 - 40 % (at +23 °C) • Tensile strength: >500 kPa • Compression hardness: 30 - 63 kPa • Elongation at break: >200 % • Linear shrinkage: max. 4 % • Water absorption: max. 5 %

Thickness Tolerance mm mm 10 12 12 12 15 15 15 20 20 20

±0.8 ±0.9 ±0.9 ±0.9 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0

Dimensions mm

Unit piece

Price EURO

650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950

1 1 1 1 1 1 1 1 1 1

238.00 68.00 136.00 248.00 70.00 138.00 256.00 78.00 158.00 286.00

THOMAPLAST®-Foam Plate made of PE Product specification

• Cell structure closed-cell • Free of foaming agents containing CFC • Absolutely odourless, environmental-neutral and suitable for food contact applications • Physiologically safe • Non-toxic • Formaldehyde- and polyvinyl-chloride-free • Good resistance to aging • Good resistance to ozone • Good resistance to oil, gasoline, solvents, acids and alkalis

​

Technical specification

Item ​ 332135 332136 332137 332138 332139 332140 332141 332142 332143 332144 332145 332146 332147 332148 332149 332150 332151 332152 332153 332154 332155 332156 332157

Thickness Tolerance mm mm 2 2 2 2.5 2.5 2.5 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10

±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.5 ±0.5 ±0.5 ±0.7 ±0.7 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8

Dimensions mm

Unit piece

Price EURO

325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650 650 x 950 325 x 480 480 x 650

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

36.00 72.00 120.00 44.00 86.00 144.00 48.00 98.00 172.00 52.00 102.00 182.00 56.00 112.00 204.00 58.00 106.00 210.00 62.00 122.00 222.00 66.00 130.00

• Material: PE (polyethylene) • Colour: white • Temperature range: -80 to +100 °C • Density: 33 kg/m3 • Tensile strength: 400 kPa (lengthwise) (ISO 1926); 265 kPa (crosswise) (ISO 1926) • Elongation at break: 130 % (lengthwise) (ISO 1926); 125 % (crosswise) (ISO 1926) • Compression hardness: at 10 % compression: 19 kPa (ISO 844) at 25 % compression: 40 kPa (ISO 844) • Compression set: at +23 °C / 22 h: 25 % (ISO 1856-C) at +23 °C / 24 h: 11 % (ISO 1856-C) • Thermal conductivity: 0.039 W/mk at +40 °C (ISO 2581) • Design: closed-cell ​

Item ​ 332322 332323 332324 332325

Thickness Tolerance mm mm 2 2 2 3

±0.5 ±0.5 ±0.5 ±0.6

Dimensions mm

Unit piece

Price EURO

250 x 250 500 x 500 1,000 x 1,000 250 x 250

1 1 1 1

14.00 20.00 40.00 16.00

THOMAPLAST® II - 2015 57

Semi-Finished Products - Foam Rubbers Item ​ 332326 332327 332328 332329 332330 332331 332332 332333 332334 332335 332336 332337 332338 332339 332340 332341 332342

Thickness Tolerance mm mm 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10

±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8

Plates (0.1 - 60 mm)

Dimensions mm

Unit piece

Price EURO

500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

28.00 54.00 20.00 34.00 68.00 24.00 42.00 86.00 26.00 46.00 94.00 26.00 52.00 102.00 28.00 58.00 118.00

Item ​ 300917 300918 300919 300920 300921 300922 300923 300924 300925 300926 300927 300928 300929 300930 300931 300932 300933 300934 300935 300936 300937 300938 300939 300940 300941

THOMAPLAST®-Foam Plate made of PEUR Product specification

• Cell structure open-pored • Without skin on both sides • Good deformability • Low density • Volume compressible • Limited resistance to hydrolysis • Good impact resilience and good tear propagation resistance • Not suitable for sliding functions

Thickness mm

Dimensions mm

Unit piece

Price EURO

40 50 60 3 5 8 10 15 20 25 30 40 50 60 3 5 8 10 15 20 25 30 40 50 60

350 x 500 350 x 500 350 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 500 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000 700 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

100.00 105.00 116.00 35.00 40.00 59.00 64.00 72.00 82.00 93.00 113.00 126.00 136.00 144.00 57.00 67.00 77.00 90.00 95.00 100.00 110.00 116.00 151.00 162.00 192.00

THOMAPLAST®-Foam Plate made of PUR Product specification

Technical specification

• Mixed-cell structure • Good deformability • Extremely high volume compressibility • Absolutely free of plasticizers • Good impact resilience and good tear propagation resistance • The foam yellows without changing the physical parameters • Good UV resistance • Good resistance to aging • Excellent resistance to gasoline and oil

• Material: PEUR (cellular polyether urethane) • Colour: grey • Temperature range: -40 to +100 °C • Density: 0.035 g/cm3 • Thickness tolerance: DIN 7715 P3 • Design: open-pored, without skin ​

Technical specification

• Material: PUR (polyurethane ester) • Colour: dark-grey • Temperature range: -40 to +170 °C • Density: 230 kg/m3 • Tensile strength: >1,000 kPa • Compression set: <13 % (DIN 53572) • Design: mixed-cell • Special features: free of plasticizers ​

Item ​ 300909 300910 300911 300912 300913 300914 300915 300916

Thickness mm

Dimensions mm

Unit piece

Price EURO

3 5 8 10 15 20 25 30

350 x 500 350 x 500 350 x 500 350 x 500 350 x 500 350 x 500 350 x 500 350 x 500

1 1 1 1 1 1 1 1

24.00 27.00 41.00 47.00 49.00 57.00 70.00 82.00

58 THOMAPLAST® II - 2015

Semi-Finished Products - Foam Rubbers Item ​ 332262 332263 332264 332265 332266 332267 332268 332269 332270 332271 332272 332273 332274 332275 332276 332277 332278 332279 332280 332281 332282 332283 332284 332285

Thickness Tolerance mm mm 0.6 0.6 0.6 0.8 0.8 0.8 1 1 1 1.3 1.3 1.3 1.6 1.6 1.6 2 2 2 3 3 3 5 5 5

±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.2 ±0.2 ±0.2 ±0.2 ±0.2 ±0.2 ±0.2 ±0.2 ±0.2 ±0.5 ±0.5 ±0.5 ±0.6 ±0.6 ±0.6 ±0.7 ±0.7 ±0.7

Plates (0.1 - 60 mm)

Dimensions mm

Unit piece

Price EURO

250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

24.00 52.00 102.00 30.00 60.00 120.00 32.00 64.00 128.00 40.00 82.00 166.00 42.00 88.00 178.00 44.00 90.00 188.00 54.00 108.00 222.00 56.00 112.00 232.00

THOMAPLAST®-High-Tech Foam Plate made of Silicone Product specification

• Cell structure predominantly closed pores • With skin on both sides • Very good volume compression • Very good elastic behavior • Very good resistance to cold • Excellent resistance to heat and hot air • Very good resistance to ozone, aging, and weather • Very good dielectrical (non-conducting) properties • Very good physiological properties • Antiadhesive surface properties • Highest gas permeability • Chemical features: Good chemical resistance to synthetic, animal, and vegetable oils, glycols, flame-resistant hydraulic fluids, certain solvents, hot water.

Poor resistance to mineral oils, solvents, acids, alkalis, and steam.

Technical specification

• Material: silicone foam (silicone rubber) • Colour: white/beige • Shore hardness A: 12° ±3° (DIN 53505) • Temperature range: -60 to +200 °C • Density: 300 ±100 kg/m3 • Elongation at break: 207 % • Compression set: 10 ±5 % • Tensile strength: 1.3 N/mm2 • Sterilization: hot air (+200 °C); steam (+136 °C) • Design: closed-cell, with skin on both sides • Flammability rating: UL 94 V-0 ​

Item ​ 331591 331592 331593 331594 331595 331596 331597 331598 331599 331600 331601 331602 331603 331604 331605 331606 331607 331608 331609 331610 331611 331654 331655 331656 331657 331658 331659

Thickness Tolerance mm mm 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 15 15 20 20

±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.8 ±0.8 ±0.8 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.5 ±1.5

Dimensions mm

Unit piece

Price EURO

250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 250 x 250 500 x 500 1,000 x 1,000 500 x 600 1,000 x 600 500 x 600 1,000 x 600 500 x 600 1,000 x 600

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

64.00 130.00 258.00 70.00 140.00 278.00 82.00 162.00 324.00 88.00 174.00 348.00 94.00 188.00 374.00 116.00 228.00 456.00 118.00 234.00 468.00 356.00 568.00 434.00 696.00 572.00 916.00

THOMAPLAST®-High-Pharm Foam Plate made of Silicone - FDA Application area

• Pharmaceutical technology, medical engineering, food technology, deadening, sealing technology, biotechnology, insulation technology

Product specification

• Premium material for pharmaceutical, medical and food uses • Excellent elastic behavior • Remarkable resistance to cold • Excellent resistance to heat and hot air • Very good resistance to ozone, aging, and weather • Very good dielectrical (non-conducting) properties • Very good physiological properties • Good elongation at break and retention force • Antiadhesive surface properties • Highest gas permeability

THOMAPLAST® II - 2015 59

Semi-Finished Products - Foam Rubbers

Plates (0.1 - 60 mm)

Technical specification

• Material: silicone foam (silicone rubber) • Shore hardness A: 25° ±5° (DIN 53505) • Temperature range: -45 to +220 °C • Density: 400 - 450 kg/m3 • Elongation at break: 290 % • Tearing strength: 2.5 MPa • Design: platinum-vulcanized, closed-cell, with skin on both sides • Tolerance: DIN ISO 3302-1 E3 • Regulations: EU 90/128/EC, BfR XV and FDA § 177.2600

Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural • Temperature range: -40 to +100 °C, for a short time +150 °C • Density: 1.41 g/cm3 • Volume resistivity: 1014 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 ​

​

Item ​ Item ​

Thickness Tolerance mm mm

334077 334078 334079 334080 334081 334082 334083 334084 334085 334086 334087 334088 334089 334090 334091 334092 334093 334094 334098 334099 334100

2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 12 12 12

±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.8 ±0.8 ±0.8 ±1.0 ±1.0 ±1.0

Dimensions mm

Unit piece

Price EURO

500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 600 x 500 600 x 1,000 600 x 2.000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

154.00 232.00 308.00 218.00 328.00 436.00 260.00 390.00 520.00 280.00 420.00 540.00 312.00 456.00 600.00 360.00 528.00 692.00 468.00 688.00 902.00

Plastics THOMAPLAST®-Plate made of PA Product specification

• Good mechanical stability, good impact toughness • Good abrasion resistance, good coefficient of sliding friction • Good temperature resistance, good resistance to aging • High humidity absorbency causing dimensional alteration • High-quality technical plastic for sliding functions in machine construction • Very good chemical resistance to oils and petrols, good resistance to alkalis, but limited stability to acids

60 THOMAPLAST® II - 2015

300016 300017 300018 300019 300020 300021 300022 300023 300024 300025 300026 300027 300028 300029 300030 300031 300032 300033 300034 300035

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.2 0.25 0.3 0.4 0.5 1 1.5 2 2.5 3 0.2 0.25 0.3 0.4 0.5 1 1.5 2 2.5 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

43.00 48.00 51.00 55.00 58.00 62.00 65.00 72.00 79.00 86.00 66.00 71.00 76.00 88.00 95.00 103.00 114.00 129.00 143.00 157.00

THOMAPLAST®-Plate made of PA - extruded Product specification

• Good mechanical stability • Very good wear resistance • Good impact toughness • Good coefficient of sliding friction • Good temperature resistance • Good electrical insulating properties

Technical specification

• Material: PA 6 (polyamide) • Colour: natural and black (material addition: MoS2 molybdenum sulphide) • Shore hardness D: 72° - 82° (DIN 53505) • Temperature range: -40 to +85 °C, for a short time +160 °C • Melting point: +220 °C (DIN 53736) • Density: 1.14 g/cm3 (DIN 53479) • Tensile strength: 78 N/mm2 (DIN 53455) • Elongation at break: >50 % (DIN 53455)

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm)

• Notch impact strength: 4 kJ/m2 (DIN 53453) • Elastic modulus: 3,100 N/mm2 (DIN 53457) • Thermal conductivity: 0.28 W/K x m (DIN 52612) • Dielectric constant: 3.9 at 50 Hz (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482)

Item ​ 301710 301711 301712 301713 301714 301715 301716 301717 301718 301983

​

Item ​ 301661 301662 301663 301664 301665 301666 301667 301668 301669 301670 301671 301672 301673 301674 301675 301676 301677 301678 301679 301680 301681 301682 301683 301684 301685 301686 301687 301688 301689 301690 301691 301692 301693 301694 301695 301982 301696 301697 301698 301699 301700 301701 301702 301703 301704 301705 301706 301707 301708 301709

Thick- Tolerance ness mm mm

Colour Dimensions Unit ​

mm

0.5 +0.08 / -0.02 nature 500 x 500 0.5 +0.08 / -0.02 nature 500 x 1,000 0.5 +0.08 / -0.02 nature 1,000 x 1,000 1 ±0.10 nature 500 x 500 1 ±0.10 nature 500 x 1,000 1 ±0.10 nature 1,000 x 1,000 1.5 ±0.15 nature 500 x 500 1.5 ±0.15 nature 500 x 1,000 1.5 ±0.15 nature 1,000 x 1,000 2 ±0.15 nature 500 x 500 2 ±0.15 nature 500 x 1,000 2 ±0.15 nature 1,000 x 1,000 3 ±0.20 nature 500 x 500 3 ±0.20 nature 500 x 1,000 3 ±0.20 nature 1,000 x 1,000 4 ±0.20 nature 500 x 500 4 ±0.20 nature 500 x 1,000 4 ±0.20 nature 1,000 x 1,000 5 ±0.25 nature 500 x 500 5 ±0.25 nature 500 x 1,000 5 ±0.25 nature 1,000 x 1,000 6 ±0.25 nature 500 x 500 6 ±0.25 nature 500 x 1,000 6 ±0.25 nature 1,000 x 1,000 8 +0.9 / +0.2 nature 250 x 305 8 +0.9 / +0.2 nature 305 x 500 8 +0.9 / +0.2 nature 500 x 610 8 +0.9 / +0.2 black 250 x 305 8 +0.9 / +0.2 black 305 x 500 8 +0.9 / +0.2 black 500 x 610 10 +0.9 / +0.2 nature 250 x 305 10 +0.9 / +0.2 nature 305 x 500 10 +0.9 / +0.2 nature 500 x 610 10 +0.9 / +0.2 black 250 x 305 10 +0.9 / +0.2 black 500 x 610 10 +0.9 / +0.2 black 500 x 610 16 +1.5 / +0.3 nature 250 x 305 16 +1.5 / +0.3 nature 305 x 500 16 +1.5 / +0.3 nature 500 x 610 16 +1.5 / +0.3 black 250 x 305 16 +1.5 / +0.3 black 305 x 500 16 +1.5 / +0.3 black 500 x 610 20 +1.5 / +0.3 nature 250 x 305 20 +1.5 / +0.3 nature 305 x 500 20 +1.5 / +0.3 nature 500 x 610 20 +1.5 / +0.3 black 250 x 305 20 +1.5 / +0.3 black 305 x 500 20 +1.5 / +0.3 black 500 x 610 25 +1.5 / +0.3 nature 250 x 305 25 +1.5 / +0.3 nature 305 x 500

Price

piece EURO 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

64.00 100.00 151.00 98.00 144.00 192.00 116.00 159.00 202.00 144.00 192.00 231.00 172.00 202.00 287.00 192.00 228.00 310.00 192.00 264.00 335.00 208.00 289.00 346.00 159.00 187.00 266.00 159.00 187.00 266.00 177.00 213.00 325.00 177.00 213.00 325.00 192.00 266.00 341.00 192.00 266.00 341.00 208.00 289.00 381.00 208.00 289.00 381.00 238.00 315.00

Thick- Tolerance ness mm mm 25 25 25 25 30 30 30 30 30 30

+1.5 / +0.3 +1.5 / +0.3 +1.5 / +0.3 +1.5 / +0.3 +2.5 / +0.5 +2.5 / +0.5 +2.5 / +0.5 +2.5 / +0.5 +2.5 / +0.5 +2.5 / +0.5

Colour Dimensions Unit ​

mm

nature black black black nature nature nature black black black

500 x 610 250 x 305 305 x 500 500 x 610 250 x 305 305 x 500 500 x 610 250 x 305 305 x 500 500 x 610

Price

piece EURO 1 1 1 1 1 1 1 1 1 1

473.00 238.00 315.00 473.00 289.00 387.00 578.00 289.00 387.00 578.00

THOMAPLAST®-Plate made of PC Application area

• Precision parts in precision mechanics, safety glasswork, optical parts in general, insulating parts in electrical engineering, computer cases, parts coming into contact with food, elements for medical and pharmaceutical devices.

Product specification

• High mechanical stability • Very high impact toughness, also at low temperatures • Best temperature resistance • Maintenance of stiffness in a broad temperature range • Very high dimensional stability • Resistance to weather • Hardly inflammable • Good electrical insulating properties • Neutral in taste and odour • Bondable and weldable • Not usable for slid functions • Physiologically safe (approved for use with food) • Limited resistance to hydrolysis • Technical plastic for impact-loaded transparent constructions in machine building and electrical engineering

Technical specification

• Material: PC (polycarbonate) • Colour: milky, colourless • Density: 1.2 g/cm3 (ISO 1183) • Temperature range: -60 to +120 °C, for a short time +130 °C • Thermal conductivity: 0.21 W/K x m (DIN 52612) • Flammability rating: UL 94 HB • Tensile strength: 70 N/mm2 (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elasticity modulus: 2,400 N/mm2 (ISO 527-2) • Rockwell hardness: M 75 (ISO 20039-2) • Notch impact strength: 9 KJ/m2 (ISO 179/1eA) • Dielectric loss factor: at 1 MHz: 0.009 (IEC 60250) at 100 Hz: 0.006 (IEC 60250) • Dielectric strength: 29 kV/mm (IEC 60243-1) • Volume resistivity: 1013 Ohm x m (IEC 60093) • Surface resistivity: 1015 Ohm (IEC 60093) • Regulations: according to BfR and FDA ​

THOMAPLAST® II - 2015 61

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm) • Tensile strength: at +23 °C: 32 - 40 MPa (ASTM D 638-80) at +120 °C: 13 - 16 MPa (ASTM D 638-80) • Elongation at break: 100 - 250 % (ASTM D 638-80) • Pressure resistance: 40 - 45 MPa (ISO 604) • Surface resistivity: 1.2 x 1018 Ohm/cm2 (ASTM D 257-78) • Dielectric constant: 2.4 - 3 at 102 - 108 Hz (ASTM D 150) Item ​

Item ​ 300454 300455 300456 300457 300458 300459

Thickness Tolerance mm mm 15 20 25 30 40 50

+0.3 / +1.5 +0.3 / +1.5 +0.3 / +1.5 +0.5 / +2.5 +0.5 / +2.5 +0.5 / +2.5

Dimensions mm

Unit piece

Price EURO

300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500

1 1 1 1 1 1

186.00 240.00 293.00 313.00 367.00 403.00

331335 331336 331337 331338 331347 331348 331349 331350 331351 331352 331353 331354

THOMAPLAST®-Plate made of PCTFE Application area

• Cryogenics, chemistry, nuclear technology, medical engineering, electrical engineering

Product specification

• PCTFE has a significantly greater hardness and dimensional stability compared to PTFE • PCTFE is the most rigid of all fluorinated plastics • Extremely low permeability to gas • PCTFE preserves its dimensional stability also at higher minus temperatures (-255 °C) • Excellent radiation resistance, resistant to UV-rays and X-rays • Remarkable chemical resistance to strong mineral acids (such as fuming nitric acid and hydrofluoric acid as well as aggressive reagents and concentrated sodium) and a lot of organic compounds • Extremely wide temperature range • Very good mechanical stability, lowest creep particularly at pressure load • Flame-resistant even at high oxygen concentration (limit „oxygen index“ 100%) • Extremely high resistance to aging • Not permeable to steam and water • Not permeable to fluid even at lowest temperatures ​

• Material: PCTFE (polychlorotrifluoroethylene) • Colour: natural, translucent • Shore hardness D: 75° - 80° (ASTM D 676) • Temperature range: -255 to +150 °C, for a short time +200 °C • Density (amorphous): 2.10 - 2.16 g/cm3 (ASTM D 1050-68)

62 THOMAPLAST® II - 2015

Dimensions mm

Unit piece

2 2 2 2 5 5 5 5 10 10 10 10

200 x 100 200 x 200 150 x 150 350 x 150 200 x 100 200 x 200 150 x 150 350 x 150 200 x 100 200 x 200 150 x 150 350 x 150

1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 517.00 632.00 556.00 706.00 661.00 891.00 701.00 970.00 770.00 1,234.00 902.00 1,487.00

THOMAPLAST®-Plate made of PE - plasticized, Food Product specification

• Suited for food • Good resistance to weather and aging • Good impact toughness (even at low temperatures) • Antiadhesive surface, low mechanical stability • Not usable for slid functions • Suitable for weldments in container construction • Good chemical resistance to acids and alkalis, limited resistance to oils and petrols

Technical specification

• Material: PE, plasticized (polyethylene, plasticized) • Colour: natural • Shore hardness D: 45° (DIN 53505) • Temperature range: -50 to +60 °C, for a short time +90 °C • Density: 0.92 g/cm3 (ISO 1183) • Yield stress: 10 N/mm2 (ISO 527-1) • Elongation at yield stress: 12 % (ISO 527-1) • Tearing strength: >50 % (ISO 527-1) • E-modulus: 200 N/mm2 (ISO 527-1) • Notch impact strength: 85 MJ/mm2 /ISO 179) • Thermal conductivity: 0.35 W/mK (DIN 52612) • Flammability rating: B2 (DIN 4102); HB (UL 94) • Volume resistivity: 1015 Ohm x cm (DIN VDE0303) • Surface resistance: 1014 Ohm (DIN VDE0303) • Dieletric strength: 45 kV/mm (IEC 60243) • Regulations: conforming to BGA III, FDA 21 CFR 177.1520

​

Technical specification

Thickness mm

Semi-Finished Products - Plastics Item ​ 300058 300059 300060 300061 300062 300063 300064 300065 300066 300067 300068 300069 300070 300071 300072 300073 300074 300075

Plates (0.1 - 60 mm)

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.1 0.2 0.3 0.5 1 1.5 2 2.5 3 0.1 0.2 0.3 0.5 1 1.5 2 2.5 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

43.00 48.00 51.00 55.00 58.00 62.00 65.00 69.00 72.00 66.00 74.00 76.00 80.00 88.00 95.00 104.00 109.00 119.00

THOMAPLAST®-Plate made of PE - rigid Product specification

• Good resistance to weather and aging • Antiadhesive surface • Good impact toughness (even at low temperatures) • Low mechanical stability, good swaging strength • Hydrophobic • Suitable for weldments in container construction • Very good chemical resistance to acids and alkalis, good resistance to oils and petrols • Physiologically safe conforming to BfR

Technical specification

• Material: PE, rigid (polyethylene, rigid) • Colour: natural • Shore hardness D: 52° (DIN 53505) • Temperature range: -50 to +80 °C • Density: 0.94 g/cm3 (ISO 1183) • Yield stress: 21 MPa (ISO 527) • Elongation at yield stress: 9 % (ISO 527) • Tearing strength: 500 % (ISO 527) • E-modulus: 800 MPa (ISO 527) • Ball pressure hardness: 43 MPa (ISO 2039-1) • Notch impact strength: 13 kJ/m2 (ISO 179) • Thermal conductivity: 0.38 W/mK (DIN 52612) • Flammability rating: B2 (DIN 4102, part 1) • Dielectric strength: 50 kV/mm • Surface resistance: 1014 Ohm (DIN IEC60093) • Regulations: KTW-approval ​

Item ​

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 0.5 1 1.5 2 2.5 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1

55.00 58.00 62.00 65.00 69.00 72.00 80.00 88.00 95.00 104.00 109.00 119.00

300079 300080 300081 300082 300083 300084 300088 300089 300090 300091 300092 300093

THOMAPLAST®-Plate made of HDPE Product specification

• Good impact toughness (even at low temperatures) • Good chemical resistance • High density and UV resistance • Good resistance to weather and aging • Antiadhesive surface • Low mechanical stability • Not usable for slid functions

Technical specification

• Material: HDPE (polyethylene, rigid) • Colour: black • Shore hardness D: 66° (DIN 53505) • Density: 0.95 g/cm3 (DIN 53479) • Temperature range: -50 to +80 °C, for a short time +90 °C • Tearing strength: 30 MPa (DIN 53455) • Elongation at break: 1,000 % (DIN 53455) • Bending strength: 30 MPa (DIN 53452) • Thermal conductivity: 0.43 W/K x m (DIN 52612) • Volume resistivity: >1015 Ohm x cm (DIN 53482) • Dielectric strength: >70 kV/mm (DIN 53481) ​

Item ​ 302095 302096 302097 302098 302099 302100 302101 302102 302103

Thickness mm

Tolerance mm

Dimensions mm

Unit piece

Price EURO

1 1 1 2 2 2 3 3 3

± 0.12 ± 0.12 ± 0.12 ± 0.12 ± 0.12 ± 0.12 ± 0.12 ± 0.12 ± 0.12

500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1

47.00 75.00 110.00 67.00 100.00 133.00 100.00 149.00 200.00

THOMAPLAST® II - 2015 63

Semi-Finished Products - Plastics Item ​ 302104 302105 302106 302107 302108 302109 302110 302111 302112 302113 302114 302115 302116 302117 302118

Plates (0.1 - 60 mm)

Thickness mm

Tolerance mm

Dimensions mm

Unit piece

Price EURO

4 4 4 5 5 6 6 8 8 10 10 12 12 15 15

± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.20 ± 0.20 ± 0.20 ± 0.20 ± 0.30 ± 0.30 ± 0.40 ± 0.40

500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

113.00 161.00 198.00 123.00 167.00 141.00 177.00 159.00 187.00 180.00 202.00 200.00 238.00 208.00 254.00

Technical specification

• Material: PEEK (polyether-etherketone) • Colour: yellow-brown • Density: 1.32 g/cm3 (ISO 1183) • Temperature range: up to +250 °C, for a short time +310 °C • Melting point: +340 °C (ISO 3146) • Thermal conductivity: 0.25 W/k x m (DIN 52612) • Flammability rating: UL 94 V-0 (thickness 1.5 mm) • Tensile strength: 110 N/mm2 (ISO 527-2) • Elongation at break: 20 % (ISO 527-2) • Elastic modulus: 4,400 N/mm2 (ISO 527-2) • Rockwell hardness: M 105 (ISO 2039-2) • Notch impact strength: 3.5 KJ/m2 (ISO 179/1eA) • Dielectric loss factor: at 1 MHz: 0.002 (IEC 60250) at 100 Hz: 0.001 (IEC 60250) • Dielectric strength: 24 kV/mm (IEC 60243-1) • Volume resistivity: 1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Regulations: according to BfR and FDA

THOMAPLAST®-Plate made of PEEK

Item ​

Application area

300398 300399 300400 300401 300402 300403 300404

• Engine parts, plain bearings, insulations, butterfly valves

Product specification

• Heavy-duty plastic • Outstanding mechanical stability, stiffness and hardness • High heat stability • Good impact toughness • Best wear resistance • Very good chemical resistance, except for conc. sulfuric acid, conc. nitric acid and aqua regia (chloronitrous acid) • Outstanding hydrolysis resistance • Very high temperature resistance (outstandingly high operating temperature) • Good creep resistance even at high temperatures • Very high dimensional stability • Inherent flame resistance • Low formation of smoke • Good electrical insulating properties as well as favorable dielectric characteristics • Outstanding radiation resistance • High-quality technical plastic (high-tech polymer), predominantly for mechanically and thermally highly loaded parts, also with antifrictional property for machine building, pump and fitting construction as well as for electrical engineering.

• For replacement of PTFE because of increased mechanical stability, outstanding wear resistance.

• For replacement of metals for pump bottom parts, valve seats, sliding elements, gearwheels, carrying wheels, high-temperature insulating parts in electrical engineering, parts in touch with boiling water or hot steam. ​

64 THOMAPLAST® II - 2015

Thickness mm

Tolerance mm

10 16 20 25 30 40 50

+0.2 / +0.9 +0.3 / +1.5 +0.3 / +1.5 +0.3 / +1.5 +0.5 / +2.5 +0.5 / +2.5 +0.5 / +2.5

Dimensions Unit mm piece 300 x 250 300 x 250 300 x 250 300 x 250 300 x 250 300 x 250 300 x 250

1 1 1 1 1 1 1

Price EURO 473.00 697.00 858.00 1,058.00 1,280.00 1,679.00 1,937.00

THOMAPLAST®-Plate made of PI Application area

• For replacement of metals and ceramics, manufacturing of valve seats („high-tech valves“), slide bearings, as well as for pump bottom parts, rollers, high-temperature insulations and for electrotechnical parts.

• Nuclear, automobile and electrical industry, semi-conductor industry, defense technology, glass industry, injection moulding and extrusion plants, chemical industry („no steam“) and welding plants.

Product specification

• Heavy-duty plastic • Outstandingly high temperature resistance (operating temperature limit) • Very high stiffness and hardness • Remarkable mechanical stability maintained over a large temperature range • Very good wear resistance • Good chemical resistance • Good antifrictional properties • Outstanding creep strength • Very good dimensional stability • Good electrical insulating properties • Favorable dielectric characteristics • Inherent flame resistance • Outstanding radiation resistance • Extremely high-quality technical plastic (duroplast) for special applications in machine and chemical apparatus building as well as in electrical engineering

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm)

Technical specification

Technical specification

• Material: PI (polyimide) • Colour: natural (chestnut) • Temperature range: -250 to +260 °C, for a short time +400 °C • Thermal conductivity: 0.35 W/K x m (DIN 52612) • Burning characteristics: 53 % („oxygen index“) (ASTM D2863) • Flammability rating: UL 94 V-0 (thickness 1.5 mm) • Density: 1.43 g/cm3 (ASTM D 792) • Tensile strength: 86 N/mm2 (ASTM D 638M) • Elongation at break: 7.5 % (ASTM D 638M) • Rockwell hardness: M 92-102 • Elastic modulus: 3,100 N/mm2 (ASTM D 790) • Izod impact toughness: 750 J/m (ASTM D 256) • Dielectric strength: 22 kV/mm (ASTM D 149) • Volume resistivity: 1016 Ohm x cm (ASTM D 257) • Surface resistivity: 1015 Ohm/cm2 (ASTM D 257)

• Material: PMMA (polymethylmethacrylate) • Version: casted • Colour: glass-clear • Temperature range: -40 to +80 °C, for a short time+90 °C • Density: 1.19 g/cm3 (DIN 53479) • Tearing strength: 72 MPa (DIN 53455) • Elongation at break: 5 % (DIN 53455) • Impact strength: 15 kJ/m2 (DIN 53453) • Notch impact strength: 1.5 kJ/m2 (DIN 53453) • Bending strength: 125 MPa (DIN 53452) • Thermal conductivity: 0.19 W/K x m at +20 °C (DIN 52612) • Dielectric constant: 2.9 (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482) • Dielectric strength: 30 kV/mm (DIN 53481) Item ​

​

Item ​ 300472 300473 300474 300475 300476 300477 300478

Thickness mm

Dimensions mm

Unit piece

1.6 3.2 4.8 6.4 12.7 25.4 38.1

254 x 254 254 x 254 254 x 254 254 x 254 254 x 254 254 x 254 254 x 254

1 1 1 1 1 1 1

301824 301825 301826 301827 301828 301829 301830 301831 301832 301833 301834 301835 301836 301837 301838 301839 301940 301941 301942 301943 301944

Price EURO 2,006.00 2,751.00 3,667.00 4,253.00 5,567.00 8,901.00 13,505.00

THOMAPLAST®-Plate made of PMMA Product specification

• Very good optical features • UV-resistance • Good resistance to acids and alkalis • Highest stiffness and hardness • High notch impact sensitivity • Not suitable for slid functions • Ideal plastic for transparent structures in machine building, in electrical engineering and model construction • 92 % transparency, with protective film on both sides.

Thickness mm

Tolerance mm

Dimensions mm

Unit piece

Price EURO

2 2 3 3 4 4 5 5 6 6 8 8 10 10 15 15 20 25 30 40 50

±0.60 ±0.60 ±0.70 ±0.70 ±0.80 ±0.80 ±0.90 ±0.90 ±1.00 ±1.00 ±1.20 ±1.20 ±1.40 ±1.40 ±1.90 ±1.90 ±2.00 ±2.50 ±3.40 ±3.90 ±4.00

500 x 500 1,000 x 1,000 500 x 500 1,000 x 1,000 500 x 500 1,000 x 1,000 500 x 500 1,000 x 1,000 500 x 500 1,000 x 1,000 500 x 500 1,000 x 1,000 500 x 500 1,000 x 1,000 500 x 500 1,000 x 1,000 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

59.00 136.00 65.00 151.00 76.00 177.00 85.00 190.00 89.00 208.00 106.00 233.00 119.00 243.00 149.00 271.00 175.00 219.00 298.00 422.00 528.00

THOMAPLAST®-Plate made of POM - Standard-Quality ​

​

Product specification

• Very good mechanical stability, tough, good coefficient of sliding friction • Great hardness and stiffness, limited weather resistance • Very good dimensional stability, particularly suitable for precise parts • Good temperature resistance, best machining workability • Not flame-resistant, combustible, not resistant to hydrolysis • High-quality technical plastic for sliding functions in machine building and in precision mechanics • Excellent resistance to oils and petrols, good resistance to alkalis

THOMAPLAST® II - 2015 65

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm)

Technical specification

Technical specification

• Material: POM (polyacetal / polyoxymethylene) • Colour: natural • Density: 1.41 g/cm3 (DIN 53479) • Temperature range: -50 to +100 °C, for a short time +140 °C • Thermal conductivity: 0.31 W(K x m) (DIN 52612) • Flammability rating: UL 94 HB (ISO 1210) • Tensile strength: 68 MPa (DIN EN ISO 527) • Elongation at break: 35 % (DIN EN ISO 527) • Elastic modulus: 3,100 MPa (DIN EN ISO 527) • Notch impact strength: 10 kJ/m2 (ISO 179/1eA) • Shore hardness D: 82 ° (DIN 53505) • Dielectric loss factor: 0.002 (at 50 Hz) (IEC 60250) • Dielectric strength: 40 kV/mm (IEC 60243-1)) • Volume resistivity: 1013 Ohm x cm (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Tolerance: DIN ISO 3302-1 E2 Item ​ 300000 300001 300002 300003 300004 300005 300006 300007 300008 300009 300010 300011 300012 300013 300014 300015

• Material: PP (polypropylene) • Design: extruded • Colour: pebble grey (RAL 7032) • Density: 0.91 g/m3 (ISO 1183) • Temperature range: 0 to +100 °C, for a short time +110 °C • Thermal conductivity: 0.22 W/K x m (DIN 52612) • Flammability rating: UL 94 HB • Melting point: +165 °C (ISO 3146) • Tensile strength: 30 N/mm2 (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elastic modulus: 1,300 N/mm2 (ISO 527-2) • Notch impact strength: 9 KJ/m2 (ISO 179/1eA) • Volume resistivity: >1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Regulations: BfR, FDA 21 CFR 177.1520 ​

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 2.5 3 4 5 0.5 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

54.00 65.00 72.00 79.00 94.00 105.00 119.00 144.00 86.00 109.00 123.00 143.00 166.00 194.00 248.00 273.00

THOMAPLAST®-Plate made of POM - FDA Application area

• Heavily loaded sliding elements, pump elements and rollers, chemical pump parts, filter housings, apparatus construction

Item ​ 300495 300496 300498 300499 300500 300501 300502 300503

Thickness mm

Tolerance mm

Dimensions mm

Unit piece

Price EURO

8 10 15 20 25 30 40 50

+0.2 / +0.9 +0.2 / +0.9 +0.3 / +1.5 +0.3 / +1.5 +0.3 / +1.5 +0.5 / +2.5 +0.5 / +2.5 +0.5 / +2.5

300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500

1 1 1 1 1 1 1 1

90.00 102.00 142.00 188.00 204.00 235.00 278.00 306.00

THOMAPLAST®-Plate made of PP - pebble grey Application area

• Heavily loaded sliding elements, pump elements and rollers, chemical pump parts, filter housings, apparatus construction

Product specification

• Good temperature resistance • Good chemical resistance • Resistant to hydrolysis • Very good dielectrical properties • Not usable for slid functions • Not suitable for use at low temperatures (embrittling at low temperatures) • Not resistant to weather • For drinking water according to KTW ​

Product specification

• Good temperature resistance • Good chemical resistance • Resistant to hydrolysis • Very good dielectrical properties • Not usable for slid functions • Not suitable for use at low temperatures (embrittling at low temperatures) • Not resistant to weather • For drinking water according to KTW

Technical specification

• Material: PP (polypropylene) • Design: extruded • Colour: pebble grey (RAL 7032) • Density: 0.91 g/m3 (ISO 1183) • Temperature range: 0 to +100 °C, for a short time +110 °C • Thermal conductivity: 0.22 W/K x m (DIN 52612) • Flammability rating: UL 94 HB • Melting point: +165 °C (ISO 3146)

66 THOMAPLAST® II - 2015

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm) • Elongation at break: ≥50 % (DIN EN ISO 527) • Elastic modulus: ≥950 N/mm2 (DIN EN ISO 527) • Impact strength: 11 MJ/mm2 (DIN EN ISO 179) • Shore hardness D: 70° (DIN EN ISO 868) • Volume resistivity: 1016 Ohm x cm (VDE 0303/3) • Surface resistivity: 1013 Ohm (VDE 0303/3) • Tolerance: DIN ISO 3302-1 E2

• Tensile strength: 30 N/mm2 (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elastic modulus: 1,300 N/mm2 (ISO 527-2) • Notch impact strength: 9 KJ/m2 (ISO 179/1eA) • Volume resistivity: >1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Regulations: BfR, FDA 21 CFR 177.1520 Item ​ 302131 302132 302133 302134 302135 302136 302137 302138 302139 302140 302141 302142 302143 302144 302145 302146 302147 302148 302149 302150 302151 302152 302153 302154 302155 302156 302157 302158 302159

​

Thickness mm

Tolerance mm

Dimensions mm

Unit piece

Price EURO

1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 15 15

±0.11 ±0.11 ±0.11 ±0.14 ±0.14 ±0.14 ±0.17 ±0.17 ±0.17 ±0.20 ±0.20 ±0.20 ±0.23 ±0.23 ±0.23 ±0.26 ±0.26 ±0.26 ±0.32 ±0.32 ±0.32 ±0.38 ±0.38 ±0.38 ±0.44 ±0.44 ±0.44 ±0.53 ±0.53

500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000 1,000 x 1,000 500 x 500 500 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

40.00 65.00 97.00 59.00 89.00 118.00 89.00 132.00 177.00 101.00 142.00 177.00 111.00 155.00 207.00 122.00 158.00 212.00 142.00 175.00 236.00 162.00 202.00 266.00 174.00 213.00 283.00 189.00 228.00

THOMAPLAST®-Plate made of PP - natural Product specification

• Very good dielectrical properties • Not usable for slid functions • Low mechanical stability • Good temperature resistance • Embrittling at low temperatures • Good resistance to aging • Not resistant to weather • Ideally suitable for weldments in container and laboratory construction • Good chemical resistance to oils, petrols, acids and alkalis • Tough and abrasion-resistant

Technical specification

• Material: PP (polypropylene) • Colour: natural • Density: 0.93 g/cm3 (DIN EN ISO 1183) • Temperature range: -15 to +120 °C, for a short time +130 °C • Thermal conductivity: 0.22 W/mk (DIN 52612) • Flammability rating: UL 94 V-2 • Tensile strength: 30 N/mm2 (DIN EN ISO 527)

Item ​ 300036 300037 300038 300039 300040 300041 300042 300043 300044 300045

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 1 1.5 2 3 0.5 1 1.5 2 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1

43.00 48.00 51.00 55.00 58.00 66.00 74.00 85.00 92.00 100.00

THOMAPLAST®-Perforated Plate made of PP light-beige Product specification

• Plate made of perforated polypropylene with different kinds of perforations • High bending strength • Extremely good impact toughness and notch impact strength • Highest fatigue resistance also at higher temperatures • Best temperature resistance • Good chemical properties, particularly to oils, petrols and acids • Ideal material for use as structural plate in a corrosive environment, for electrical and thermal insulations, also usable for mechanical separation (separation lattice) in chemical pans, battery boxes, covers etc.

Technical specification

• Material: PP (polypropylene) • Colour: light-beige • Temperature range: -5 to +100 °C, for a short time +120 °C • Density: 0.91 g/cm3 (DIN 53479) • Tearing strength: 36 MPa (DIN 53455) • Notch impact strength: 8 kJ/m2 (DIN 53455) • Rockwell hardness: 75 Mpa (DIN 53456) • Elastic modulus: 1,350 Mpa (DIN 53457) • Volume resistivity: >1016 Ohm x cm (DIN 53482) • Surface resistivity: 1013 Ohm/cm2 (DIN 53482) • Dielectric strength: 70 kV/mm (DIN 53481) • Thickness: 2 mm ​

THOMAPLAST® II - 2015 67

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm) • Notch impact strength: at 23 °C: 6 kJ/m2, at -30 °C: 5 kJ/m2 (DIN 53453) • Special features: strongly resistant to cold, impact-proof • Tolerance: DIN ISO 3302-1 E2

​

Item ​

Item

Type

300046 300047 300048 300049 300050 300051 300052 300053 300054 300055 300056 300057

Open Arrangement Dimensions Unit Price area % ​ mm piece EURO

​

​

300537 300538 300539 300540

1 2 3 4

33 50 43 68

300541

5

35

60°, Ø 3.0 mm 60°, Ø 4.8 mm 60°, Ø 6.4 mm 60°, Ø 8.0 mm square, 4.7 x 4.7 mm

500 x 500 500 x 500 500 x 500 500 x 500

1 1 1 1

100.00 100.00 100.00 100.00

500 x 500

1

100.00

THOMAPLAST -Plate made of PS ®

Product specification

• High-impact proof polystyrene based on styrene butadiene • Outstanding hardness and stiffness • Remarkable resistance to lowest temperatures • High dimensional stability in heat • Good stress cracking resistance • Very good mechanical and dielectric properties • Good resistance to aging • Not resistant to weather • Not usable for sliding functions • Good chemical resistance to acids and alkalis, limited stability to oils, not stable to petrols

Technical specification

• Material: PS (polystyrene) • Colour: white • Temperature range: -60 to +70°C • Density: 1.05 g/cm3 • Tensile strength: 17 MPa • Fire classification: UL 94 HB • Volume resistivity: 1016 Ohm x cm • Breakdown strength: 155 kV/mm • Ball-pressure hardness: 80 N/mm2 • Limiting bending stress: 39 N/mm2 • Elongation at break: >30 % • Yield stress: 17 N/mm2 • Impact toughness: at 23 °C: >30 kJ/m2, at -30 °C: 30 kJ/m2 (DIN 53453)

68 THOMAPLAST® II - 2015

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 0.8 1 1.5 2 3 0.5 0.8 1 1.5 2 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1

43.00 48.00 51.00 55.00 58.00 63.00 66.00 74.00 80.00 88.00 95.00 106.00

THOMAPLAST®-Plate made of PTFE (virgin) Product specification

• Heavy-duty plastic • Very good chemical resistance to any organic and inorganic media • No water absorption • Very good temperature resistance • Outstanding coefficient of sliding friction • Excellent resistance to weather • Antiadhesive surface • Very low friction values • Very good dielectric properties independent of frequency and temperature • Very good electrical insulating capacity also at air humidity • Non-combustible • High tracking resistance • Highest gas-tightness • Resistant to stress cracks • High-quality technical plastic for chemical apparatus construction, process engineering, machine construction, and electrical engineering • Use in machine building and precision mechanical engineering: packings, piston rings, slide bearings, thread sealing tapes • Use in chemical industry: packings, pumps, valves, filter bodies, heat exchanger, laboratory devices • Use in electrical engineering: insulators in heavy current engineering and HF technology, line switches, tube sockets

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Shore hardness D: 55° - 59° (DIN 53505) • Special features: non-combustible, very good resistance to weather • Temperature range: -200 to +260 °C, for a short time +280 °C • Melting point: +320 °C • Density: 2.15 - 2.18 g/cm3 (DIN 53479) • Tensile strength: 20 - 40 N/mm2 (DIN 53455) • Elongation at break: 250 - 500 % (ASTM D638) • Notch impact strength: 16 kJ/m2 • Pressure resistance: 3.9 - 4.4 N/mm2 (1 % deformation at +23 °C) • Thermal conductivity: 0.26 W/K x m (ASTM C 117) • Dielectric constant: 2.1 at 50 Hz (DIN 53483) • Tolerance: DIN ISO 3302-1 E2 ​

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm) Item ​ 300206 300207 300208

Thickness mm

Dimensions mm

Unit piece

30 40 50

1,000 x 1,000 300 x 300 300 x 300

1 1 1

Price EURO 3,696.00 763.00 958.00

THOMAPLAST®-Plate made of PTFE (expanded) Application area Item ​ 300174 300175 300176 300177 300178 300179 300180 300181 300182 300183 300184 300185 300186 300187 47963 300188 300189 47964 300190 300191 47965 47973 300192 47966 300193 300194 47967 47974 300195 47968 47975 300196 300197 300198 300199 47969 300200 300201 47970 47978 300202 47971 300203 300204 47972 300205

Thickness mm

Dimensions mm

Unit piece

1 1 1 1.2 1.2 1.5 1.5 1.5 2 2 2 2.5 2.5 2.5 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 15 15 15 20 20 20 25 25 25 30 30

300 x 300 600 x 600 1,200 x 1,200 600 x 600 1,200 x 1,200 300 x 300 600 x 600 1,200 x 1,200 300 x 300 600 x 600 1,200 x 1,200 300 x 300 600 x 600 1,200 x 1,200 300 x 300 600 x 600 1,200 x 1,200 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600 1,000 x 1,000 300 x 300 600 x 600

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 81.00 151.00 276.00 183.00 340.00 109.00 201.00 376.00 99.00 215.00 404.00 135.00 258.00 490.00 127.00 298.00 570.00 146.00 323.00 554.00 172.00 396.00 701.00 203.00 458.00 796.00 242.00 485.00 1,002.00 289.00 604.00 1,250.00 304.00 885.00 1,499.00 374.00 1,107.00 1,877.00 393.00 914.00 2,463.00 485.00 1,142.00 3,079.00 577.00 1,364.00

• Machine engineering, precision engineering, process technology, electrical engineering, chemical apparatus construction

Product specification

• Sealing plate made of 100 % pure expanded PTFE • Microcellular structure • For manufacturing of gaskets and sealing tapes without pre-fabrication • Particularly suited also for sealing of small surfaces • Good creep and cold flow properties • Evening-up of surface irregularities (due to the soft structure), thus surface pretreatment of components is not necessary • High resistance to pressure • Capable of being cut and punched after adhesive bonding • Absolutely resistant to inorganic and organic solutions, even to aqua regia • Highly resistant to all alkalis, alkohols, ketones, gasolines and oils • Not stable to dissolved and molten alkali metals and oxidizing agents such as elemental fluorine at higher temperatures • Excellent resistance to weather • Good resistance to aging • The plates are also available self-adhesive on one side

Technical specification

• Material: PTFE (polytetrafluoroethylene) - expanded fibre structure • Colour: white • Temperature range: -240 to +260 °C; for a short time up to +315 °C • Density: 0.75 g/cm3 • Regulations: FDA § 21 CFR 177.1550 ​

Item ​ 302010 302011 302012 302013 302014 302015 302016 302017 302018 302019

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 2 3 4 6 1 2 3 4 6

450 x 500 450 x 500 450 x 500 450 x 500 450 x 500 900 x 500 900 x 500 900 x 500 900 x 500 900 x 500

1 1 1 1 1 1 1 1 1 1

144.00 224.00 268.00 330.00 438.00 288.00 452.00 536.00 660.00 872.00

THOMAPLAST® II - 2015 69

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm)

THOMAPLAST®-Plate made of PVC (rigid) crystal-clear

THOMAPLAST®-Plate made of PVC (rigid) transparent

Product specification

Application area

• High stiffness and dimensional stability • Good mechanical stability • Best impact strength • Very good dielectrical properties • Flame-resistant • Good resistance to aging and weather • Not usable for slid functions • Risk of breakage at low temperatures • For weldments in laboratory and container building as well as for static parts in machine construction and in electrical engineering • Good chemical resistance, especially to petrol and oils

• Transparent components such as protective devices or observation windows (lower optical quality than PMMA)

Product specification

• High mechanical stability • UV-stabilized • Hardly inflammable • Good chemical resistance • Hot formable • Bondable and weldable

Technical specification

• Material: rigid PVC (rigid polyvinyl chloride) • Colour: transparent with blue cast • Design: extruded and calendered, protective foil on both sides • Density: 1.37 g/cm3 • Temperature range: 0 to +60 °C, for a short time +75 °C

Technical specification

• Material: rigid PVC (rigid polyvinyl chloride) • Colour: crystal-clear • Temperature range: -35 to +60 °C, for a short time +70 °C • Density: 1.31 g/cm3 • Tensile impact toughness: >650 kJ/m2 • Tensile strength: 47 N/mm2 • Tolerance: DIN ISO 3302-1 E2

​

​

Item ​ Item ​ 19958 19959 19960 19962 19963 19964 19965 19966 19967 19968 19969 19970 19971 19973 19974 19975 19976 19977 19978 19979

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.2 0.25 0.3 0.5 0.8 1 1.5 2 2.5 3 0.2 0.25 0.3 0.5 0.8 1 1.5 2 2.5 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

43.00 48.00 51.00 58.00 62.00 65.00 68.00 70.00 72.00 79.00 66.00 74.00 79.00 95.00 105.00 109.00 115.00 129.00 137.00 145.00

70 THOMAPLAST® II - 2015

302163 302164 302165 302166 302167 302168 302169 302170 302171 302172 302173 302174

Thickness mm

Tolerance mm

Dimensions mm

Unit piece

Price EURO

2 2 3 3 4 4 5 5 6 6 8 8

± 0.14 ± 0.14 ± 0.17 ± 0.17 ± 0.20 ± 0.20 ± 0.23 ± 0.23 ± 0.26 ± 0.26 ± 0.32 ± 0.32

500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000 500 x 500 500 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1

45.00 68.00 66.00 99.00 86.00 132.00 111.00 166.00 115.00 184.00 132.00 220.00

THOMAPLAST®-Plate made of PVC (rigid) - light-grey Product specification

• High stiffness and dimensional stability • High mechanical stability • Best impact strength • Very good dielectrical properties • Flame-resistant • Good resistance to aging and weather • Not usable for slid functions • Risk of breakage at low temperatures • For weldments in laboratory and container building as well as for static parts in machine construction and in electrical engineering • Good chemical resistance, especially to petrol and oils

Semi-Finished Products - Plastics

Plates (0.1 - 60 mm)

Technical specification

Product specification

• Material: rigid PVC (rigid polyvinyl chloride) • Colour: light-grey • Temperature range: -15 to +60 °C, for a short time +70 °C • Density: 1.39 g/cm3 • Tensile impact toughness: >320 MJ/mm2 • Tensile strength: >50 N/mm2 • Tolerance: DIN ISO 3302-1 E2

• Heavy-duty plastic • Very good chemical resistance, but limited compared to PTFE • Outstanding hydrolysis resistance • Good temperature resistance coupled with high operating temperature limit • High impact toughness even at low temperatures • Great hardness • High mechanical stability, stiffness and creep strength (in this regard superior to other plastics) • High heat-stability • Thermoplasticly processable • Good electrical insulating properties • Very high dimensional stability • Inherent flame-resistance • Very good radiation resistance • Outstanding UV and weather resistance • Physiologically safe

​

Technical specification Item ​ 19980 19981 19982 19983 19984 19985 19986 19987 19988 19989 19990 19991 19992 19993 19994 19995 19996 19997

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.2 0.4 1 1.5 2 2.5 3 4 5 0.2 0.4 1 1.5 2 2.5 3 4 5

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

43.00 48.00 51.00 55.00 58.00 62.00 65.00 69.00 76.00 66.00 74.00 80.00 88.00 95.00 104.00 109.00 117.00 131.00

THOMAPLAST®-Plate made of PVDF Application area

• Used in chemical apparatus and machine building, especially in the petrochemical, chemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology (pump carrying wheels, flanges, valve bodies etc.).

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, translucent • Density: 1.78 g/cm3 (ISO 1183) • Temperature range: -60 to +150 °C, for a short time +160 °C • Melting point: +169 °C (ISO 3146) • Flammability rating: UL 94 V-0 (at 1.5 or 3 mm thickness) • Thermal conductivity: 0.19 W/K x m at +23 °C (DIN 52612) • Tensile strength: 50 N/mm2 (yield stress) (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elastic modulus: 2,000 N/mm2 (ISO 527-2) • Notch impact strength: 6 kJ/m2 (ISO 179/1eA) • Rockwell hardness: M 75 (ISO 2039-2) • Dielectric loss factor: at 1 MHz: 0.165 (IEC 60250) at 100 Hz: 0.025 (IEC 60250) • Dielectric strength: 20 kV/mm (IEC 60242-1) • Volume resistivity: 1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Tolerance: DIN ISO 3302-1 E2 • Regulations: according to BfR and FDA ​

Item ​ 300434 300435 300436 300437 300438 300439 300440 300441 300442 300443

Thickness mm

Tolerance mm

6 10 12 16 20 25 30 40 50 60

+0.2 / +0.7 +0.2 / +0.9 +0.3 / +1.5 +0.3 / +1.5 +0.3 / +1.5 +0.3 / +1.5 +0.5 / +2.5 +0.5 / +2.5 +0.5 / +2.5 +0.5 / +3.5

Dimensions Unit mm piece 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500 300 x 500

1 1 1 1 1 1 1 1 1 1

Price EURO 309.00 344.00 416.00 536.00 622.00 708.00 812.00 970.00 1,196.00 1,707.00

THOMAPLAST® II - 2015 71

Semi-Finished Products - Ceramic, Synthetic and Natural Materials

Ceramic, Synthetic and Natural Materials

Plates (0.1 - 60 mm)

THOMAPLAST®-Glass Ceramic Block ​

THOMAPLAST®-Glass Ceramic General product specification

• Highest temperature ceramic • Absolute chemical resistance • No uptake of humidity • Non-porous • Not deformable • Great hardness • Outstanding insulating material at high voltages, a high frequency range at high temperatures • Achievable manufacturing tolerances up to 0.013 mm • Achievable surface roughness >0.5 µm to 0.013 µm (polished) • Processing can be done with usual metal processing tools for metal (metal cutting), thus purchase of expensive diamond tools is not necessary

Item ​ 300529 300530 300531 300532

General technical specification

• Material: glass ceramic • Colour: white • Temperature range: -200 to +800 °C, for a short time +1,000 °C • Special features: highest temperature loadability, great hardness, achievable manufacturing tolerances up to 0.013 mm • Expansion coefficient: at -200 to +25 °C: 74 x 10-7 / °C; at +25 to +800 °C: 126 x 10-7 / °C • Specific heat (+25 °C): 0.79 kJ/kg x K • Heat conduction (+25 °C): 1.46 W/m °C • Heat diffusion (+25 °C): 7.3 x 10-7 m2/s • Density: 2.52 g/cm3 • Porosity: 0 % • Elastic modulus: 66.9 GPa (Youngs modulus) • Shear modulus: 25.5 GPa • Rockwell hardness: M 48 • Tensile strength: 94 MPa (modulus of rupture) • Pressure resistance: 345 MPa • Breaking strength: 1.53 MPa M 0.5 • Dielectric constant: 6.03 at 1 kHz; 5.67 at 8.5 GHz • Dielectric strength (GS/WS): 40 kV/mm at 0.01 thickness, +25 °C • GS-Volume resistivity: >1016 Ohm/cm ​

THOMAPLAST -Glass Ceramic Plate ®

​

300533 300534 300535

Thickness mm

Dimensions mm

Unit piece

Price EURO

3 6 10

100 x 100 100 x 100 100 x 100

1 1 1

369.00 502.00 599.00

72 THOMAPLAST® II - 2015

Dimensions mm

Unit piece

Price EURO

10 15 20 25

100 x 10 100 x 15 100 x 20 100 x 25

1 1 1 1

195.00 228.00 266.00 305.00

THOMAPLAST®-Glass Ceramic Test Package Product specification

• Content: 1 round rod 10 x 50 mm; 1 block 10 x 10 x 25 mm; 1 plate 3 x 25 x 50 mm. ​

Item ​ 300536

Unit piece

Price EURO

1

197.00

THOMAPLAST®-Aramid Plate Product specification

• Packing material, free of asbestos • Good resistance to aging • Highest temperature resistance • Resistance to hot steam and hot water, gases, salt solutions, fuels, alcohols, organic and inorganic acids, lubricants and cooling agents.

Technical specification

• Material: aramid fibres, bonded with NBR (KlingerSil®-C-4400) • Colour: green (printed) • Max. temperature: +400 °C • Density: 1.6 g/cm3 (DIN 53479) • Max. operating pressure: 60 bar • Compressibility: 11 % (ASTM F 36 A) • Resilience: 50 % (ASTM F 36 A) • Pressure resistance: 35 N/mm2 ​

Item ​

Thickness mm

Semi-Finished Products - Ceramic, Synthetic and Natural Materials Item ​ 300665 300666 300667 300668 300669 300670 300671 300672 300673 300674 300675 300676 300677 300678 300679 300680

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.3 0.5 0.8 1 1.5 2 2.5 3 0.3 0.5 0.8 1 1.5 2 2.5 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

72.00 79.00 94.00 108.00 115.00 140.00 153.00 170.00 103.00 133.00 208.00 223.00 273.00 361.00 454.00 529.00

Item ​ 300945 300946 300948 300949 300950 300951

Plates (0.1 - 60 mm) Thickness Tolerance mm mm 2 3 1 1.5 2 3

±0.2 ±0.2 ±0.1 ±0.2 ±0.2 ±0.2

Dimensions mm

Unit piece

Price EURO

375 x 750 375 x 750 750 x 750 750 x 750 750 x 750 750 x 750

1 1 1 1 1 1

133.00 215.00 156.00 169.00 187.00 294.00

THOMAPLAST®-Slap Cork Plate Product specification

• Insulating material • Vibration gasket • Packing material • Good resistance to aging and weather • Outstanding resistance to ozone • Good resistance to petrol and oils as well as to acids and alkalis

Technical specification

THOMAPLAST®-High-Tech Aramid/Graphite HighTemperature Packing Plate Application area

• Hot water applications, hot steam applications

• Material: cork, PUR-bonded • Colour: brown • Max. temperature: +110 °C • Density: 0.55 g/cm3 (DIN 53479) • Resilience: 70 % (ASTM F 36 B) • Tensile strength: 5 - 15 % at 300 psi ​

Product specification

• Good pressure stability • Extremely high temperature load possible • Very good resistance to oil and fuels • Simultaneous load with maximum permissible values of pressure and temperature is not allowed during operation.

Technical specification

• Material: aramid fibres combined with graphite (graphite portion: 75 %) • Colour: golden-yellow with black print • Max. temperature: +360 °C, for a short time +400 °C • Density: 1 g/cm3 (DIN 53479) • Max. operating pressure: max. 100 bar • Compressibility: 45 % +/- 5 % (ASTM F 36 J) • Resilience: <7 % (ASTM F 36 J) • Pressure resistance: >38 N/mm2 at +300 °C (DIN 52913) • Cold elastic recovery: 2.5 % (DIN 28090-2) • Heat elastic recovery: 1 % (DIN 28090-2) • Design: antiadhesive coating on both sides • Regulations: KTW, WRC, gas leakage DIN 3535 Part 4 <7 ml/min. ​

Item ​ 300747 300748 300749 300750 300751 300752 300753 300754 300755 300756

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.5 2 2.5 3 1 1.5 2 2.5 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1

69.00 72.00 75.00 79.00 83.00 86.00 90.00 105.00 115.00 124.00

THOMAPLAST®-Synthetic Plate Product specification

Item ​ 300943 300944

Thickness Tolerance mm mm 1 1.5

±0.1 ±0.2

Dimensions mm

Unit piece

Price EURO

375 x 750 375 x 750

1 1

105.00 121.00

• Packing material, free of asbestos • Fitted with stretch metal insert • Increased structural stability up to 1.5 mm thickness • Good resistance to aging • Highest temperature resistance • Resistance to steam, gases, salt solutions, fuels, alcohols, organic and inorganic acids, lubricants and cooling agents.

THOMAPLAST® II - 2015 73

Semi-Finished Products - Ceramic, Synthetic and Natural Materials Technical specification

• Material: synthetic fibres, bonded with NBR (KlingerSil®-C-4409) • Colour: green • Max. temperature: +400 °C • Density: 2.0 g/cm3 (DIN 53479) • Max. operating pressure: 80 bar • Compressibility: 7 % (ASTM F 36 A) • Resilience: 55 % (ASTM F 36 A) • Pressure resistance: 25 N/mm2 • Regulations: HTB, KTW, WRC, BAM, CUVV 28, Din-DVGW-88.01e052, BS 7531 Grade y, oxygen (VGB 62) at 100 bar/+80 °C

Item ​ 300691 300692 300693 300694 300695 300696 300697 300698 300699 300700 300701 300702 300703 300704

​

Plates (0.1 - 60 mm) Thickness mm

Dimensions mm

Unit piece

Price EURO

0.5 0.8 1 1.5 2 2.5 3 0.5 0.8 1 1.5 2 2.5 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000 1,000 x 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1

51.00 54.00 58.00 61.00 71.00 79.00 86.00 62.00 76.00 86.00 97.00 132.00 147.00 166.00

Metals Item ​ 300681 300682 300683 300684 300685 300686 300687 300688 300689 300690

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.8 1 1.5 2 3 0.8 1 1.5 2 3

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000 1.500 x 1,000

1 1 1 1 1 1 1 1 1 1

99.00 111.00 126.00 130.00 184.00 244.00 281.00 328.00 444.00 639.00

THOMASTABIL®-Plate made of Aluminum Product specification

• Medium-strong alloy of good stability • Corrosion-proof • For manufacturing of cases, plates, chassis etc.

• Material standard BS 1479 SIC (1987) • Material: AIBS 1474 ​

THOMAPLAST®-Vulcanized Fibre Plate Product specification

• High mechanical stability • Outstanding resistance to aging • Best mechanical strength • Resistance to oils, fats and petrol, many organic solvents, but only of limited resistance to acids and alkalis.

Item ​

Technical specification

• Material: vulcanized fibre • Colour: red • Max. temperature: +90 °C • Density: 1.3 g/cm3 • Regulations: KTW approval (D1 and D2)

300594 300595 300596 300597

Thickness mm

Dimensions mm

Unit piece

Price EURO

1.2 2 3 6

200 x 300 300 x 500 300 x 500 300 x 500

1 1 1 1

25.00 48.00 83.00 137.00

​

THOMASTABIL®-Plate made of Stainless Steel Product specification

• Seamless type 316L according to ASTM 269 • Austenitic, corrosion-proof and antimagnetic steel • Easy to process and to polish • Improvement of mechanical properties by cold processing • Typical use in chemical engineering, food processing, gas and oil industries, in hospital engineering and in vehicle construction, wherever corrosion resistance is required. ​

74 THOMAPLAST® II - 2015

Semi-Finished Products - Metals

Plates (0.1 - 60 mm)

THOMASTABIL®-Screen Plate made of Aluminum Product specification

• Perforated plate made of aluminum (3103 H14) • Closed longitudinal edges • Untreated surface • Corrosion-proof and antimagnetic ​

Item ​ 300577 300578 300579 300580 300581

Thickness mm

Dimensions mm

Unit piece

Price EURO

1 1.2 1.5 2.5 3

500 x 300 500 x 300 500 x 300 500 x 300 500 x 300

1 1 1 1 1

90.00 111.00 114.00 164.00 181.00

THOMASTABIL®-Plate made of Copper Product specification

• Highly conductive • Corrosion-proof • Formable as solid rod, pipe or sheet • Material standard BS 2870/C 101 (1980)

Technical specification

• Analysis for copper: 99.90 %, lead 0.005 %, bismuth 0.001 % • Tensile strength: 240 N/mm2 (for solid rods and sheets)

Item

​

Item ​ 300567 300568

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.35 0.45

300 x 300 300 x 300

1 1

51.00 56.00

Type

Open Arrangement Thick- Dimensions Price area ness % ​ mm mm EURO

​

​

300625 300626 300627 300628 300629 300630 300631 300632

1 2 3 4 5 6 7 8

42 22 45 47 33 50 43 68

300633

9

62

300634 10

52

60°, Ø 1.2 mm 45°, Ø 1.5 mm 60°, Ø 1.7 mm 60°, Ø 2.0 mm 60°, Ø 3.0 mm 60°, Ø 4.8 mm 60°, Ø 6.4 mm 60°, Ø 8.0 mm square, 6 x 6 mm square, 10 x 10 mm

0.6 0.6 0.6 1.2 1.2 1.2 1.2 1.2

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500

78.00 78.00 78.00 90.00 90.00 90.00 90.00 90.00

1.2

500 x 500

90.00

1.2

500 x 500

90.00

THOMASTABIL®-Screen Plate made of Steel Sheets ​

THOMASTABIL®-Plate made of Brass ​

Product specification

• Machine quality • Turned material • Processing to bolts, gearwheels etc.

Item ​ 300556 300557 300558 300559 300560

Thickness mm

Dimensions mm

Unit piece

Price EURO

0.3 0.6 0.8 1 1.6

300 x 600 300 x 600 300 x 600 300 x 600 300 x 600

1 1 1 1 1

92.00 119.00 143.00 176.00 202.00

THOMAPLAST® II - 2015 75

Semi-Finished Products - Metals

Plates (0.1 - 60 mm)

Product specification

• Zinc-plated, perforated steel sheet • Can be overpainted by brushing after degreasing • Application as filter screen and supporting plate in process engineering, as protective device in apparatus construction.

Item ​ 300610 300611 300612 300613 300614 300615 300616 300617

Welding Wires (2.0 - 3.5 mm) THOMAPLAST®-Welding Wire made of HDPE ​

Type Open Arrangement Thick- Dimensions Price area ness ​ % ​ mm mm EURO 1 2 3 4 5 6 7 8

42 22 45 47 33 50 43 68

60° 45° 60° 60° 60° 60° 60° 60°

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500 500 x 500

70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00

Item ​

THOMASTABIL®-Screen Plate made of Stainless Steel

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

3 3 3

+0.3 / +0.1 +0.3 / +0.1 +0.3 / +0.1

1,000 1,000 1,000

3 6 12

21.00 30.00 48.00

Application area

302062 302063 302064

Product specification

THOMAPLAST®-Welding Wire made of PP pebble grey

• Application in the food processing industry, in chemical engineering, gas and mineral oil industries as well as in sanitary and hospital engineering, wherever highest corrosion protection is required.

• Perforated plate made of stainless steel • Closed edges • Austenitic, antimagnetic design (SS 316) • High corrosion resistance

Application area

• For hot gas welding of plates, round rods and pipes made of PP (same melt index). ​

​

Item ​

Type Open Arrangement Dimensions Thick- Price area ness ​ % ​ mm mm EURO

300618 300619 300620 300621

1 2 3 4

47 33 50 43

300622

5

35

300623

6

62

300624

7

52

60°, Ø 2.0 mm 60°, Ø 3.0 mm 60°, Ø 4.8 mm 60°, Ø 6.4 mm square, 4.7 x 4.7 mm square, 6 x 6 mm staggered, 6 x 6 mm

76 THOMAPLAST® II - 2015

500 x 500 500 x 500 500 x 500 500 x 500

0.55 0.55 0.55 0.55

105.00 105.00 105.00 105.00

500 x 500

0.55 105.00

500 x 500

0.55 105.00

500 x 500

0.55 105.00

Item ​ 302090 302091 302092

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

3 3 3

+0.3 / +0.1 +0.3 / +0.1 +0.3 / +0.1

1,000 1,000 1,000

3 6 12

24.00 30.00 54.00

THOMAPLAST®-Welding Wire made of PVC (rigid) ​

Semi-Finished Products

Welding Wires (2.0 - 3.5 mm)

Technical specification

Item ​

• Material: rigid PVC (rigid polyvinyl chloride) • Colour: grey • Design: extruded • Density: 1.42 g/cm3 • Temperature range: 0 to +60 °C, for a short time +75 °C Item ​ 302059 302060 302061

Outside Ø mm

Length mm

Unit piece

Price EURO

3 3 3

1,000 1,000 1,000

3 6 12

18.00 30.00 48.00

338195 338196 338197 338198 338199 338200

Outside Ø mm

Length m

Unit piece

Price EURO

2 2 3 3 3.5 3.5

10 30 5 15 5 15

1 1 1 1 1 1

126.00 302.00 128.00 306.00 168.00 408.00

THOMAPLAST®-High-Chem Welding Wire made of PFA Product specification

THOMAPLAST®-High-Chem Welding Wire made of MFA Product specification

• MFA is a newly developed fluorinated plastic, highly resistant and suitable for extreme mechanical and thermal loads • Lowest embrittlement at temperature load • High resistance to weathering • Very good mechanical stability from lowest temperatures up to +250 °C • Volume resistivity, dielectric constant and loss factor independently of the temperature • Outstanding thermal stability (weight loss <0.3 % at +380 °C, 50 min. in air) • Non-oxidizing

Technical specification

• Material: MFA (modified fluoralkoxy), (copolymer of tetrafluoroethylene and perfluoromethylvinylether) • Colour: natural • Density: 2.12 - 2.17 g/cm3 • Temperature range: -70 to +240 °C • Melting point: +290 °C • Embrittlement temperature: -80 °C • Coefficient of sliding friction against steel (dry): 0.1 - 0.2 • Tearing strength: 28 - 36 N/mm2 at +23 °C; 15 - 21 N/mm2 at +150 °C; 6 - 8 N/mm2 at +250 °C • Shore hardness D: 59° (DIN 53505) • Buckling strength 0.3 mm (cycles): 70,000 - 100,000 • Coefficient of thermal expansion: at +23 to +150 °C (1/K) 12 - 20 x 10-5 • Water absorption: <0.03 % • Oxygen index: >95 % • Flammability rating: UL 94 V-0 • Dielectric constant: 2.0 at 50 Hz • Volume resistivity: >1016 Ohm x cm • Surface resistivity: >1017 Ohm/cm2 • Dielectric strength: 34 - 38 kV (thickness 1 mm)

• Highest temperature resistance of all meltable fluorinated plastics • Very high dimensional stability under heat • Flame-resistant • Very high resistance to media • Extremely high resistance to weather • Low friction coefficient

Technical specification

• Material: PFA (perfluoralkoxy) • Colour: natural • Density: 2.15 g/cm3 • Temperature range: -200 to +260 °C • Melting point: +310 °C • Embrittlement temperature: -270 °C • Coefficient of sliding friction against steel (dry): 0.2 - 0.3 • Tearing strength: at +23 °C: 27 - 32 N/mm2 at +150 °C: 15 - 21 N/mm2 at +250 °C: 14 - 15 N/mm2 • Shore hardness D: 55° (DIN 53505) • Buckling strength 0.18 - 0.20 mm (cycles): 500,000 • Coefficient of thermal expansion: at +23 to +150 °C (1/K) 14 - 18 x 10-5 • Water absorption: <0.03 % • Oxygen index: >95 % • Flammability rating: UL 94 V-0 • Dielectric constant: 2.03 at 50 Hz • Volume resistivity: >1016 Ohm x cm • Surface resistivity: >1017 Ohm/cm2 • Dielectric strength: 20 kV (thickness 3.2 mm) ​

​

Item ​ 338201 338202 338203 338204 338205 338206

Outside Ø mm

Length m

Unit piece

Price EURO

2 2 3 3 3.5 3.5

10 30 5 15 5 15

1 1 1 1 1 1

136.00 330.00 134.00 328.00 178.00 434.00

THOMAPLAST® II - 2015 77

Semi-Finished Products

Welding Wires (2.0 - 3.5 mm)

THOMAPLAST®-High-Chem Welding Wire made of PVDF

Rods (2 - 210 mm) Elastomers, Plastics and Glass Ceramic

Application area

• Used in chemical apparatus and machine building, especially in the petrochemical, chemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology (pump carrying wheels, flanges, valve bodies etc.).

Product specification

• Heavy-duty plastic • Very good chemical resistance, but limited compared to PTFE • Outstanding hydrolysis resistance • Good temperature resistance coupled with high operating temperature limit • High impact toughness even at low temperatures • High mechanical stability, stiffness and creep strength (in this regard superior to other plastics) • High heat-stability, great hardness • Thermoplasticly processable • Good electrical insulating properties • Very high dimensional stability • Inherent flame-resistance • Very good radiation resistance • Outstanding UV and weather resistance • Physiologically safe

Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, translucent • Density: 1.78 g/cm3 (ISO 1183) • Temperature range: -60 to +150 °C, for a short time +160 °C • Melting point: +169 °C (ISO 3146) • Flammability rating: UL 94 V-0 (at 1.5 or 3 mm thickness) • Thermal conductivity: 0.19 W/K x m at +23 °C (DIN 52612) • Tensile strength: 50 N/mm2 (yield stress) (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elastic modulus: 2,000 N/mm2 (ISO 527-2) • Notch impact strength: 6 kJ/m2 (ISO 179/1eA) • Rockwell hardness: M 75 (ISO 2039-2) • Dielectric loss factor: at 1 MHz: 0.165 (IEC 60250), at 100 Hz: 0.025 (IEC 60250) • Dielectric strength: 20 kV/mm (IEC 60242-1) • Volume resistivity: 1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Tolerance: DIN ISO 3302-1 E2 • Regulations: according to BfR and FDA

302175 302176 302177

• Good mechanical stability • Very good wear resistance • Good impact toughness • Good coefficient of sliding friction • Good temperature resistance • Good electrical insulating properties

Technical specification

• Material: PA 6 (polyamide) • Colour: natural and black (material addition: MoS2 molybdenum sulphide) • Shore hardness D: 72° - 82° (DIN 53505) • Temperature range: -40 to +85 °C, for a short time +160 °C • Melting point: +220 °C (DIN 53736) • Density: 1.14 g/cm3 (DIN 53479) • Tensile strength: 78 N/mm2 (DIN 53455) • Elongation at break: >50 % (DIN 53455) • Notch impact strength: 4 kJ/m2 (DIN 53453) • Elastic modulus: 3,100 N/mm2 (DIN 53457) • Thermal conductivity: 0.28 W/K x m (DIN 52612) • Dielectric constant: 3.9 at 50 Hz (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482)

Item ​

Outside Ø mm

Length mm

Unit piece

Price EURO

3 3 3

1,000 1,000 1,000

1 2 3

25.00 43.00 57.00

78 THOMAPLAST® II - 2015

Product specification

​

​

Item ​

THOMAPLAST®-Solid Rod made of PA - tempered

301719 301720 301721 301725 301726 301727 301728 301729 301730 301731 301732 301733 301734 301735 301736 301737 301738 301739 301740 301741

Outside Ø mm

Tolerance mm

Length Colour Unit Price mm ​ piece EURO

6 6 6 8 8 8 10 10 10 10 10 10 12 12 12 15 15 15 16 16

+0.4 / +0.1 +0.4 / +0.1 +0.4 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2

250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500

nature nature nature nature nature nature nature nature nature black black black nature nature nature nature nature nature black black

4 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

22.00 21.00 21.00 24.00 24.00 34.00 16.00 29.00 47.00 16.00 29.00 47.00 21.00 34.00 57.00 29.00 47.00 72.00 29.00 47.00

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Item ​ 301742 301743 301744 301745 301746 301747 301748 301749 301750 301751 301752 301753 301754 301755 301756 301757 301758 301759 301760 301761 301762 301763 301764 301765 301766 301767 301768 301769 301770 301771 301772 301773 301774 301775

Outside Ø mm

Tolerance mm

Length Colour Unit Price mm ​ piece EURO

16 18 18 18 20 20 20 20 20 20 25 25 25 25 25 25 30 30 30 30 30 30 40 40 40 40 40 40 50 50 50 50 50 50

+0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.7 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.3 / +0.3 +1.3 / +0.3 +1.3 / +0.3 +1.3 / +0.3 +1.3 / +0.3 +1.3 / +0.3

1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000

black nature nature nature nature nature nature black black black nature nature nature black black black nature nature nature black black black nature nature nature black black black nature nature nature black black black

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

72.00 36.00 57.00 90.00 41.00 64.00 100.00 41.00 64.00 100.00 57.00 85.00 126.00 57.00 85.00 126.00 72.00 100.00 139.00 72.00 100.00 139.00 116.00 146.00 177.00 116.00 146.00 177.00 141.00 174.00 218.00 141.00 174.00 218.00

Rods (2 - 210 mm)

Technical specification

• Material: PC (polycarbonate) • Colour: milky, colourless • Density: 1.2 g/cm3 (ISO 1183) • Temperature range: -60 to +120 °C, for a short time +130 °C • Thermal conductivity: 0.21 W/K x m (DIN 52612) • Flammability rating: UL 94 HB • Tensile strength: 70 N/mm2 (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elasticity modulus: 2,400 N/mm2 (ISO 527-2) • Rockwell hardness: M 75 (ISO 20039-2) • Notch impact strength: 9 KJ/m2 (ISO 179/1eA) • Dielectric loss factor: at 1 MHz: 0.009 (IEC 60250) at 100 Hz: 0.006 (IEC 60250) • Dielectric strength: 29 kV/mm (IEC 60243-1) • Volume resistivity: 1013 Ohm x m (IEC 60093) • Surface resistivity: 1015 Ohm (IEC 60093) • Regulations: according to BfR and FDA ​

Item ​ 300444 300445 300446 300447 300449 300450 300451 300452 300453

THOMAPLAST®-Solid Rod made of PC

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

6 8 10 12 20 25 30 40 50

+0.1 / +0.4 +0.1 / +0.5 +0.1 / +0.5 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +1.2 +0.2 / +1.2 +0.2 / +1.6 +0.3 / +2.0

500 500 500 500 500 500 500 500 500

1 1 1 1 1 1 1 1 1

14.00 15.00 17.00 25.00 45.00 64.00 76.00 125.00 172.00

Application area

• Precision parts in precision mechanics, safety glasswork, optical parts in general, insulating parts in electrical engineering, computer cases, parts coming into contact with food, elements for medical and pharmaceutical devices.

Product specification

THOMAPLAST®-Solid Rod made of PCTFE Application area

• Cryogenics, chemistry, nuclear technology, medical engineering, electrical engineering ​

• High mechanical stability • Very high impact toughness, also at low temperatures • Best temperature resistance • Maintenance of stiffness in a broad temperature range • Very high dimensional stability • Resistance to weather • Hardly inflammable • Good electrical insulating properties • Neutral in taste and odour • Bondable and weldable • Not usable for slid functions • Physiologically safe (approved for use with food) • Limited resistance to hydrolysis • Technical plastic for impact-loaded transparent constructions in machine building and electrical engineering

THOMAPLAST® II - 2015 79

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Product specification

• PCTFE has a significantly greater hardness and dimensional stability compared to PTFE • PCTFE is the most rigid of all fluorinated plastics • Extremely low permeability to gas • PCTFE preserves its dimensional stability also at higher minus temperatures (-255 °C) • Excellent radiation resistance, resistant to UV-rays and X-rays • Remarkable chemical resistance to strong mineral acids (such as fuming nitric acid and hydrofluoric acid as well as aggressive reagents and concentrated sodium) and a lot of organic compounds • Extremely wide temperature range • Very good mechanical stability, lowest creep particularly at pressure load • Flame-resistant even at high oxygen concentration (limit „oxygen index“ 100%) • Extremely high resistance to aging • Not permeable to steam and water • Not permeable to fluid even at lowest temperatures

Item ​ 331316 331317 331318 331319 331320 331321 331322 331323 331324 331325 331326 331327 331328 331329 331330

Technical specification

• Material: PCTFE (polychlorotrifluoroethylene) • Colour: natural, translucent • Shore hardness D: 75° - 80° (ASTM D 676) • Temperature range: -255 to +150 °C, for a short time +200 °C • Density (amorphous): 2.10 - 2.16 g/cm3 (ASTM D 1050-68) • Tensile strength: at +23 °C: 32 - 40 MPa (ASTM D 638-80) at +120 °C: 13 - 16 MPa (ASTM D 638-80) • Elongation at break: 100 - 250 % (ASTM D 638-80) • Pressure resistance: 40 - 45 MPa (ISO 604) • Surface resistivity: 1.2 x 1018 Ohm/cm2 (ASTM D 257-78) • Dielectric constant: 2.4 - 3 at 102 - 108 Hz (ASTM D 150) Item ​ 331289 331290 331291 331292 331293 331294 331295 331296 331297 331298 331299 331300 331301 331302 331303 331304 331305 331306 331307 331308 331309 331310 331311 331312 331313 331314 331315

Outside Ø mm

Length mm

Unit piece

20 22 25 30 35 40 45 50 55 60 70 75 80 90 100

400 400 400 400 400 400 200 200 200 100 100 100 100 100 100

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 392.00 422.00 498.00 640.00 746.00 918.00 648.00 724.00 844.00 772.00 892.00 928.00 1,006.00 1,206.00 1,282.00

THOMAPLAST®-Solid Rod made of PEEK Application area

• Engine parts, plain bearings, insulations, butterfly valves

Product specification

Outside Ø mm

Length mm

Unit piece

Price EURO

7 8 10 12 15 18 20 22 25 30 35 40 45 50 55 60 70 75 80 90 100 7 8 10 12 15 18

200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 50 50 50 50 50 50 400 400 400 400 400 400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

74.00 84.00 112.00 136.00 190.00 212.00 245.00 264.00 314.00 410.00 468.00 574.00 408.00 464.00 542.00 482.00 548.00 584.00 630.00 754.00 802.00 118.00 132.00 178.00 218.00 302.00 338.00

80 THOMAPLAST® II - 2015

Rods (2 - 210 mm)

• Heavy-duty plastic • Outstanding mechanical stability, stiffness and hardness • High heat stability • Good impact toughness • Best wear resistance • Very good chemical resistance, except for conc. sulfuric acid, conc. nitric acid and aqua regia (chloronitrous acid) • Outstanding hydrolysis resistance • Very high temperature resistance (outstandingly high operating temperature) • Good creep resistance even at high temperatures • Very high dimensional stability • Inherent flame resistance • Low formation of smoke • Good electrical insulating properties as well as favorable dielectric characteristics • Outstanding radiation resistance • High-quality technical plastic (high-tech polymer), predominantly for mechanically and thermally highly loaded parts, also with antifrictional property for machine building, pump and fitting construction as well as for electrical engineering.

• For replacement of PTFE because of increased mechanical stability, outstanding wear resistance.

• For replacement of metals for pump bottom parts, valve seats, sliding elements, gearwheels, carrying wheels, high-temperature insulating parts in electrical engineering, parts in touch with boiling water or hot steam. ​

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Technical specification

Technical specification

• Material: PEEK (polyether-etherketone) • Colour: yellow-brown • Density: 1.32 g/cm3 (ISO 1183) • Temperature range: up to +250 °C, for a short time +310 °C • Melting point: +340 °C (ISO 3146) • Thermal conductivity: 0.25 W/k x m (DIN 52612) • Flammability rating: UL 94 V-0 (thickness 1.5 mm) • Tensile strength: 110 N/mm2 (ISO 527-2) • Elongation at break: 20 % (ISO 527-2) • Elastic modulus: 4,400 N/mm2 (ISO 527-2) • Rockwell hardness: M 105 (ISO 2039-2) • Notch impact strength: 3.5 KJ/m2 (ISO 179/1eA) • Dielectric loss factor: at 1 MHz: 0.002 (IEC 60250), at 100 Hz: 0.001 (IEC 60250) • Dielectric strength: 24 kV/mm (IEC 60243-1) • Volume resistivity: 1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Regulations: according to BfR and FDA Item ​ 300405 300406 300407 300408 300409 300410 300411 300412 300413 300414 300415 300416 300417 300418

Outside Ø mm

Tolerance mm

Length mm

Unit piece

6 8 10 16 18 20 25 30 40 50 60 80 90 100

+0.1 / +0.4 +0.1 / +0.5 +0.1 / +0.5 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +1.2 +0.2 / +1.2 +0.2 / +1.6 +0.3 / +2.0 +0.3 / +2.5 +0.4 / +3.0 +0.5 / +3.4 +0.6 / +3.8

500 500 500 500 500 500 500 500 500 500 500 500 500 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1

Rods (2 - 210 mm)

• Material: PI (polyimide) • Colour: natural (chestnut) • Temperature range: -250 to +260 °C, for a short time +400 °C • Thermal conductivity: 0.35 W/K x m (DIN 52612) • Burning characteristics: 53 % („oxygen index“) (ASTM D2863) • Flammability rating: UL 94 V-0 (thickness 1.5 mm) • Density: 1.43 g/cm3 (ASTM D 792) • Tensile strength: 86 N/mm2 (ASTM D 638M) • Elongation at break: 7.5 % (ASTM D 638M) • Rockwell hardness: M 92-102 • Elastic modulus: 3,100 N/mm2 (ASTM D 790) • Izod impact toughness: 750 J/m (ASTM D 256) • Dielectric strength: 22 kV/mm (ASTM D 149) • Volume resistivity: 1016 Ohm x cm (ASTM D 257) • Surface resistivity: 1015 Ohm/cm2 (ASTM D 257)

​

Price EURO 53.00 61.00 76.00 145.00 167.00 199.00 247.00 296.00 423.00 576.00 771.00 1,347.00 1,706.00 2,098.00

Item ​ 300460 300461 300462 300463 300464 300465 300466 300467 300468 300469 300470 300471

THOMAPLAST®-Solid Rod made of PI Application area

• For replacement of metals and ceramics, manufacturing of valve seats („high-tech valves“), slide bearings, as well as for pump bottom parts, rollers, high-temperature insulations and for electrotechnical parts.

• Nuclear, automobile and electrical industry, semi-conductor industry, defense technology, glass industry, injection moulding and extrusion plants, chemical industry („no steam“) and welding plants.

Outside Ø mm

Tolerance mm

Length mm

Unit piece

6.4 9.5 11.1 12.7 15.9 19 25.4 31.8 38.1 50.8 63.5 82.5

-0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25 -0 / +0.25

237.5 237.5 237.5 237.5 237.5 237.5 116 116 116 116 116 110

1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 367.00 456.00 487.00 540.00 573.00 622.00 643.00 663.00 848.00 1,469.00 1,988.00 3,408.00

THOMAPLAST®-Solid Rod made of PMMA ​

Product specification

• Heavy-duty plastic • Outstandingly high temperature resistance (operating temperature limit) • Very high stiffness and hardness • Remarkable mechanical stability maintained over a large temperature range • Good chemical resistance, good antifrictional properties • Outstanding creep strength • Very good dimensional stability and wear resistance • Good electrical insulating properties • Favorable dielectric characteristics • Inherent flame resistance • Outstanding radiation resistance • Extremely high-quality technical plastic (duroplast) for special applications in machine and chemical apparatus building as well as in electrical engineering

THOMAPLAST® II - 2015 81

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Product specification

• Very good optical features • UV-resistance • Good resistance to acids and alkalis • Highest stiffness and hardness • High notch impact sensitivity • Not suitable for slid functions • Ideal plastic for transparent structures in machine building, in electrical engineering and model construction

Tolerance mm

Length mm

Unit piece

Price EURO

40 40 40

±0.3 ±0.3 ±0.3

250 500 1,000

1 1 1

141.00 213.00 297.00

THOMAPLAST®-Solid Rod made of POM - black • For precision parts in machine and apparatus engineering

• Material: PMMA (polymethylmethacrylate) • Version: casted • Colour: glass-clear • Temperature range: -40 to +80 °C, for a short time+90 °C • Density: 1.19 g/cm3 (DIN 53479) • Tearing strength: 72 MPa (DIN 53455) • Elongation at break: 5 % (DIN 53455) • Impact strength: 15 kJ/m2 (DIN 53453) • Notch impact strength: 1.5 kJ/m2 (DIN 53453) • Bending strength: 125 MPa (DIN 53452) • Thermal conductivity: 0.19 W/K x m at +20 °C (DIN 52612) • Dielectric constant: 2.9 (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482) • Dielectric strength: 30 kV/mm (DIN 53481)

301840 301841 301842 301843 301844 301845 301846 301847 301848 301849 301850 301851 301852 301853 301854 301855 301856 301857 301858 301859 301860 301861 301862 301863 301864 301865 301866 301867 301868 301869 301870 301871 301872

301873 301874 301875

Outside Ø mm

Application area

Technical specification

Item ​

Item ​

Rods (2 - 210 mm)

Product specification

• Good mechanical stability • High mechanical hardness and stiffness • Extruded and tempered • Good impact resistance

Technical specification

• Material: POM-C (polyacetal-copolymer) • Colour: black • Density: 1.41 g/cm³ • Temperature range: -50 to +115 °C; for a short time +140 °C

​

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

2 2 2 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 15 15 15 20 20 20 25 25 25 30 30 30

±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3 ±0.3

250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

39.00 62.00 85.00 44.00 70.00 93.00 47.00 77.00 103.00 49.00 80.00 105.00 52.00 85.00 113.00 54.00 87.00 118.00 62.00 100.00 139.00 72.00 118.00 156.00 98.00 156.00 185.00 113.00 164.00 210.00 126.00 177.00 238.00

82 THOMAPLAST® II - 2015

Item ​ 302178 302179 302180 302181 302182 302183 302184 302185 302186 302187 302188 302189 302190 302191 302192 302193 302194 302195 302196 302197 302198 302199 302200 302201 302202

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

6 6 6 8 8 8 10 10 10 12 12 12 16 16 16 18 18 18 20 20 20 25 25 25 28

+0.1 / +0.4 +0.1 / +0.4 +0.1 / +0.4 +0.1 / +0.5 +0.1 / +0.5 +0.1 / +0.5 +0.1 / +0.5 +0.1 / +0.5 +0.1 / +0.5 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.7 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +0.9

250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250

2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

14.00 24.00 40.00 24.00 33.00 54.00 18.00 30.00 40.00 22.00 37.00 59.00 32.00 52.00 77.00 41.00 65.00 98.00 46.00 75.00 110.00 57.00 86.00 115.00 72.00

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Item ​ 302203 302204 302205 302206 302207 302208 302209 302210

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

28 28 30 30 30 32 32 32

+0.2 / +0.9 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +0.9 +0.2 / +1.1 +0.2 / +1.1 +0.2 / +1.1

500 1,000 250 500 1,000 250 500 1,000

1 1 1 1 1 1 1 1

108.00 144.00 83.00 124.00 165.00 89.00 127.00 155.00

Item ​ 300484 300485 300486 300487 300488 300489 300490 300491 300492 300493 300494

THOMAPLAST®-Solid Rod made of POM - FDA

Rods (2 - 210 mm) Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

25 30 36 40 45 50 60 70 80 90 100

+0.2 / +0.9 +0.2 / +0.9 +0.2 / +1.1 +0.2 / +1.1 +0.3 / +1.3 +0.3 / +1.3 +0.3 / +1.6 +0.3 / +1.6 +0.4 / +2.0 +0.5 / +2.2 +0.6 / +2.5

500 500 500 500 500 500 500 500 500 500 500

1 1 1 1 1 1 1 1 1 1 1

69.00 76.00 98.00 115.00 135.00 156.00 189.00 213.00 256.00 289.00 313.00

Application area

• Heavily loaded sliding elements, pump elements and rollers, chemical pump parts, filter housings, apparatus construction

THOMAPLAST®-Solid Rod made of PP - pebble grey

Product specification

Application area

• Good temperature resistance • Good chemical resistance • Resistant to hydrolysis • Very good dielectrical properties • Not usable for slid functions • Not suitable for use at low temperatures (embrittling at low temperatures) • Not resistant to weather • For drinking water according to KTW

Technical specification

• Material: PP (polypropylene) • Design: extruded • Colour: pebble grey (RAL 7032) • Density: 0.91 g/m3 (ISO 1183) • Temperature range: 0 to +100 °C, for a short time +110 °C • Thermal conductivity: 0.22 W/K x m (DIN 52612) • Flammability rating: UL 94 HB • Melting point: +165 °C (ISO 3146) • Tensile strength: 30 N/mm2 (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elastic modulus: 1,300 N/mm2 (ISO 527-2) • Notch impact strength: 9 KJ/m2 (ISO 179/1eA) • Volume resistivity: >1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Regulations: BfR, FDA 21 CFR 177.1520

• Heavily loaded sliding elements, pump elements and rollers, chemical pump parts, filter housings, apparatus construction

Product specification

• Good temperature resistance • Good chemical resistance • Resistant to hydrolysis • Very good dielectrical properties • Not usable for slid functions • Not suitable for use at low temperatures (embrittling at low temperatures) • Not resistant to weather • For drinking water according to KTW

Technical specification

• Material: PP (polypropylene) • Design: extruded • Colour: pebble grey (RAL 7032) • Density: 0.91 g/m3 (ISO 1183) • Temperature range: 0 to +100 °C, for a short time +110 °C • Thermal conductivity: 0.22 W/K x m (DIN 52612) • Flammability rating: UL 94 HB • Melting point: +165 °C (ISO 3146) • Tensile strength: 30 N/mm2 (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elastic modulus: 1,300 N/mm2 (ISO 527-2) • Notch impact strength: 9 KJ/m2 (ISO 179/1eA) • Volume resistivity: >1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Regulations: BfR, FDA 21 CFR 177.1520

​

​

Item ​ 300479 300480 300481 300482 300483

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

5 8 10 16 20

+0.1 / +0.4 +0.1 / +0.5 +0.1 / +0.5 +0.2 / +0.7 +0.2 / +0.7

500 500 500 500 500

1 1 1 1 1

14.00 15.00 17.00 34.00 48.00

Item ​ 302065 302066

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

10 10

+0.6 / +0.1 +0.6 / +0.1

250 500

2 2

18.00 30.00

THOMAPLAST® II - 2015 83

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Item ​ 302067 302068 302069 302070 302071 302072 302073 302074 302075 302076 302077 302078 302079 302080 302081 302082 302083 302084 302085 302086 302087 302088 302089

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

10 15 15 15 20 20 20 25 25 25 30 30 30 40 40 40 50 50 50 60 60 70 70

+0.6 / +0.1 +0.8 / +0.2 +0.8 / +0.2 +0.8 / +0.2 +1.0 / +0.2 +1.0 / +0.2 +1.0 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.2 / +0.2 +1.2 / +0.2 +1.2 / +0.2 +1.5 / +0.2 +1.5 / +0.2 +1.5 / +0.2 +2.0 / +0.3 +2.0 / +0.3 +2.0 / +0.3 +2.3 / +0.3 +2.3 / +0.3 +2.5 / +0.3 +2.5 / +0.3

1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 250 500

2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

47.00 33.00 58.00 48.00 29.00 51.00 83.00 35.00 61.00 89.00 50.00 82.00 121.00 63.00 100.00 172.00 69.00 115.00 189.00 75.00 120.00 82.00 134.00

THOMAPLAST®-Virgin PTFE Semi-Finished Products General product specification

• Heavy-duty plastic • Very good chemical resistance to any organic and inorganic media • No water absorption • Very good temperature resistance • Outstanding coefficient of sliding friction • Excellent resistance to weather • Antiadhesive surface • Very low friction values • Very good dielectric properties independent of frequency and temperature • Very good electrical insulating capacity also at air humidity • Non-combustible • High tracking resistance • Highest gas-tightness • Resistant to stress cracks • High-quality technical plastic for chemical apparatus construction, process engineering, machine construction, and electrical engineering • Use in machine building and precision mechanical engineering: packings, piston rings, slide bearings, thread sealing tapes • Use in chemical industry: packings, pumps, valves, filter bodies, heat exchanger, laboratory devices • Use in electrical engineering: insulators in heavy current engineering and HF technology, line switches, tube sockets

General technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Shore hardness D: 55° - 59° (DIN 53505) • Special features: non-combustible, very good resistance to weather • Temperature range: -200 to +260 °C, for a short time +280 °C • Melting point: +320 °C • Density: 2.15 - 2.18 g/cm3 (DIN 53479) • Tensile strength: 20 - 40 N/mm2 (DIN 53455)

84 THOMAPLAST® II - 2015

Rods (2 - 210 mm)

• Elongation at break: 250 - 500 % (ASTM D638) • Notch impact strength: 16 kJ/m2 • Pressure resistance: 3.9 - 4.4 N/mm2 (1 % deformation at +23 °C) • Thermal conductivity: 0.26 W/K x m (ASTM C 117) • Dielectric constant: 2.1 at 50 Hz (DIN 53483) • Tolerance: DIN ISO 3302-1 E2 ​

THOMAPLAST®-Solid Rod made of PTFE (virgin) extruded ​

Item ​ 300329 300330 300331 300332 300333 300334 300335 300336 300337 300338 300339 300340 300341 300342 300343 300344 300345 300346 300347 300348 300349 300350 300351 300352 300353 300354 300355 300356 300357 300358 300359 300360 300361 300362 300363 300364

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

6 8 10 12 15 16 20 25 30 40 50 60 70 80 90 100 120 6 8 10 12 15 16 20 25 30 40 50 60 70 80 90 100 120 6 8

-0 / +0.4 -0 / +0.4 -0 / +0.4 -0 / +0.8 -0 / +0.8 -0 / +0.8 -0 / +0.8 -0 / +1.2 -0 / +1.2 -0 / +1.6 -0 / +2.0 -0 / +2.4 -0 / +3.2 -0 / +3.2 -0 / +4.0 -0 / +4.0 -0 / +5.0 -0 / +0.4 -0 / +0.4 -0 / +0.4 -0 / +0.8 -0 / +0.8 -0 / +0.8 -0 / +0.8 -0 / +1.2 -0 / +1.2 -0 / +1.6 -0 / +2.0 -0 / +2.4 -0 / +3.2 -0 / +3.2 -0 / +4.0 -0 / +4.0 -0 / +5.0 -0 / +0.4 -0 / +0.4

250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 1,000 1,000

2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

14.00 15.00 18.00 24.00 33.00 37.00 44.00 63.00 84.00 102.00 117.00 135.00 177.00 209.00 265.00 306.00 370.00 14.00 24.00 37.00 41.00 66.00 70.00 85.00 117.00 168.00 202.00 234.00 269.00 316.00 375.00 478.00 511.00 690.00 24.00 44.00

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Item ​ 300365 300366 300367 300368 300369 300370 300371 300372 300373 300374 300375 300376 300377 300378 300379

Outside Ø mm

Tolerance mm

Length mm

Unit piece

10 12 15 16 20 25 30 40 50 60 70 80 90 100 120

-0 / +0.4 -0 / +0.8 -0 / +0.8 -0 / +0.8 -0 / +0.8 -0 / +1.2 -0 / +1.2 -0 / +1.6 -0 / +2.0 -0 / +2.4 -0 / +3.2 -0 / +3.2 -0 / +4.0 -0 / +4.0 -0 / +5.0

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 68.00 74.00 111.00 125.00 147.00 196.00 281.00 352.00 390.00 455.00 630.00 754.00 846.00 1,022.00 1,288.00

THOMAPLAST®-Solid Rod made of PTFE (virgin) pressed ​

Rods (2 - 210 mm)

Vulkollan®-Solid Rod - Shore 70° Product specification

• High-performance polyurethane elastomer • Constant elastomer quality due to closely specified quality control • Excellent mechanical wear resistance • Very good resistance to abrasion • Remarkable elasticity over the complete hardness range • Good tear propagation resistance • High self-damping • Low compression set • Only relatively suitable for slipping functions • Free of plasticizers • Very good resistance to ozone, UV, and high-energy radiation • Good resistance to weather and aging • Good resistance to many oils, fats, petrols, and different solvents

Technical specification

• Material: PUR (Vulkollan® D 15); PUR (polyester polyol and naphthylene-1,5-diisocyanate (Desmodur 15)) as well as with additional, special chain elongators • Colour: natural • Shore hardness A: 70° ±5° (DIN 53505) • Temperature range: -25 to +80 °C • Density: 1.24 g/cm3 (DIN 53479) • Tearing strength: 40 MPa (DIN 53504) • Elongation at break: 620 % (DIN 53504) • Tension: at 100 % elongation: 3 MPa at 300 % elongation: 7 MPa • Tear propagation resistance: 25 N/mm (DIN 53507) • Abrasion: 50 mm2 (DIN 53516) • Compression set: at +72 °C / 24 h: 18 % at +23 °C / 72 h: 10 % • Rebound elasticity: 45 % ​

Item ​ 300380 300381 300382 300383 300384 300385 300386 300387 300388 300389 300390 300391 300392 300393 300394 300395 300396 300397

Outside Ø mm

Tolerance mm

Length mm

Unit piece

130 140 150 160 170 180 190 200 210 130 140 150 160 170 180 190 200 210

-0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0 -0 / +4.0

150 150 150 150 150 150 150 150 150 300 300 300 300 300 300 300 300 300

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 344.00 398.00 451.00 473.00 519.00 587.00 651.00 723.00 800.00 603.00 696.00 790.00 815.00 919.00 1,011.00 1,119.00 1,245.00 1,378.00

Item ​ 301269 301270 301271 301272 301273 301274 301275 301276 301277 301278 301279 301280 301281

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

6 6 8 8 10 10 12 12 14 14 16 16 18

±0.25 ±0.25 ±0.30 ±0.30 ±0.30 ±0.30 ±0.40 ±0.40 ±0.40 ±0.40 ±0.40 ±0.40 ±0.50

250 500 250 500 250 500 250 500 250 500 250 500 250

1 1 1 1 1 1 1 1 1 1 1 1 1

49.00 90.00 57.00 103.00 62.00 110.00 64.00 116.00 70.00 123.00 75.00 131.00 80.00

THOMAPLAST® II - 2015 85

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Item ​ 301282 301283 301284 301285 301286 301287 301288 301289 301290 301291 301292 301293 301294 301295 301296 301297 301298 301299 301300 301301 301302 301303 301304 301305 301306 301307 301308 301309 301310 301311 301312

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

18 20 20 25 25 30 30 35 35 40 40 45 45 50 50 55 55 60 60 65 65 70 70 75 75 80 80 90 90 100 100

±0.50 ±0.50 ±0.50 ±0.50 ±0.50 ±0.60 ±0.60 ±0.60 ±0.60 ±0.60 ±0.60 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00

500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

139.00 87.00 151.00 90.00 156.00 95.00 169.00 113.00 195.00 136.00 228.00 146.00 243.00 151.00 233.00 177.00 271.00 192.00 300.00 210.00 315.00 228.00 333.00 254.00 371.00 259.00 374.00 277.00 381.00 341.00 473.00

Vulkollan®-Solid Rod - Shore 82° Product specification

• High-performance polyurethane elastomer • Constant elastomer quality due to closely specified quality control • Excellent mechanical wear resistance • Very good resistance to abrasion • Remarkable elasticity over the complete hardness range • Good tear propagation resistance • High self-damping, low compression set • Only relatively suitable for slipping functions • Free of plasticizers • Very good resistance to ozone, UV, and high-energy radiation • Good resistance to weather and aging • Good resistance to many oils, fats, petrols, and different solvents ​

86 THOMAPLAST® II - 2015

Rods (2 - 210 mm)

Technical specification

• Material: PUR (Vulkollan® D 15); PUR (polyester polyol and naphthylene-1,5-diisocyanate (Desmodur 15) as well as with additional, special chain elongators • Colour: natural • Shore hardness A: 82° ±5° (DIN 53505) • Density: 1.25 g/cm3 (DIN 53479) • Temperature range: -15 to +80 °C • Tearing strength: 46 MPa (DIN 53504) • Elongation at break: 650 % (DIN 53504) • Tear propagation resistance: 40 N/mm (DIN 53507) • Abrasion: 32 mm3 (DIN 53516) • Compression set: 18 % at +70 °C / 24 h Item ​ 301313 301314 301315 301316 301317 301318 301319 301320 301321 301322 301323 301324 301325 301326 301327 301328 301329 301330 301331 301332 301333 301334 301335 301336 301337 301338 301339 301340 301341 301342 301343 301344 301345 301346 301347 301348 301349 301350 301351 301352 301353 301354 301355 301356

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 25 30 30 35 35 40 40 45 45 50 50 55 55 60 60 65 65 70 70 75 75 80 80 90 90 100 100

±0.25 ±0.25 ±0.30 ±0.30 ±0.30 ±0.30 ±0.40 ±0.40 ±0.40 ±0.40 ±0.40 ±0.40 ±0.50 ±0.50 ±0.50 ±0.50 ±0.50 ±0.50 ±0.60 ±0.60 ±0.60 ±0.60 ±0.60 ±0.60 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00

250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

49.00 90.00 57.00 103.00 62.00 110.00 64.00 116.00 70.00 123.00 75.00 131.00 80.00 139.00 87.00 151.00 90.00 156.00 95.00 169.00 113.00 195.00 136.00 228.00 146.00 243.00 151.00 233.00 177.00 271.00 192.00 300.00 210.00 315.00 228.00 333.00 254.00 371.00 259.00 374.00 277.00 381.00 341.00 473.00

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Vulkollan®-Solid Rod - Shore 90°

Item ​

Product specification

301370 301371 301372 301373 301374 301375 301376 301377 301378 301379 301380 301381 301382 301383 301384 301385 301386 301387 301388 301389 301390 301391 301392 301393 301394 301395 301396 301397 301398 301399 301400

• High-performance polyurethane elastomer • Constant elastomer quality due to closely specified quality control • Excellent mechanical wear resistance • Very good resistance to abrasion • Remarkable elasticity over the complete hardness range • Good tear propagation resistance • High self-damping • Low compression set • Only relatively suitable for slipping functions • Free of plasticizers • Very good resistance to ozone, UV, and high-energy radiation • Good resistance to weather and aging • Good resistance to many oils, fats, petrols, and different solvents

Technical specification

• Material: PUR (Vulkollan® D 15); PUR (polyester polyol and naphthylene-1,5-diisocyanate (Desmodur 15) as well as with additional, special chain elongators • Colour: natural • Shore hardness A: 90° ±5° (DIN 53505) • Density: 1.26 g/cm3 (DIN 53479) • Temperature range: -25 to +80 °C • Tearing strength: 40 MPa (DIN 53504) • Elongation at break: 660 % (DIN 53504) • Tension: at 100 % elongation: 8 MPa at 300 % elongation: 16 MPa • Tear propagation resistance: 55 N/mm (DIN 53507) • Abrasion: 32 mm2 (DIN 53516) • Compression set: at +70 °C / 24 h: 20 % at +23 °C / 72 h: 12 % • Rebound elasticity: 55 % ​

Rods (2 - 210 mm) Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

18 20 20 25 25 30 30 35 35 40 40 45 45 50 50 55 55 60 60 65 65 70 70 75 75 80 80 90 90 100 100

±0.50 ±0.50 ±0.50 ±0.50 ±0.50 ±0.60 ±0.60 ±0.60 ±0.60 ±0.60 ±0.60 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00 ±1.00

500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

146.00 93.00 159.00 95.00 167.00 110.00 190.00 131.00 223.00 151.00 254.00 164.00 277.00 172.00 264.00 195.00 310.00 213.00 338.00 233.00 356.00 259.00 379.00 261.00 384.00 274.00 392.00 294.00 407.00 353.00 509.00

THOMAPLAST®-Solid Rod made of PVC (rigid) Application area

• Laboratory technology, chemical technology, mechanical engineering, electrical engineering

Product specification

Item ​ 301357 301358 301359 301360 301361 301362 301363 301364 301365 301366 301367 301368 301369

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

6 6 8 8 10 10 12 12 14 14 16 16 18

±0.25 ±0.25 ±0.30 ±0.30 ±0.30 ±0.30 ±0.40 ±0.40 ±0.40 ±0.40 ±0.40 ±0.40 ±0.50

250 500 250 500 250 500 250 500 250 500 250 500 250

1 1 1 1 1 1 1 1 1 1 1 1 1

57.00 100.00 59.00 108.00 64.00 116.00 67.00 121.00 75.00 131.00 80.00 139.00 85.00

• High mechanical stability • UV-stabilized • Good dielectrical properties • Good chemical resistance • Resistant to weather • Hot formable • Bondable and weldable ​

THOMAPLAST® II - 2015 87

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Technical specification

Item

• Material: rigid PVC (rigid polyvinyl chloride) • Colour: grey or red • Design: extruded and calendered • Density: 1.42 g/cm3 • Temperature range: 0 to +60 °C, for a short time +75 °C Item ​ 301947 301948 301949 301950 301951 301952 301953 301954 301955 301956 301957 301958 301959 301960 301961 301962 301963 301964 301965 301966 301967 301968 301969 301970 301971 301972 301973 301974 301975 301976 301977 301978 301979 301980 301981 302230 302231 302232 302233 302234 302235 302236 302237 302238 302239 302240 302241 302242 302243

Outside Ø mm

Tolerance mm

mm

​

piece

EURO

6 6 8 8 10 10 12 12 15 15 15 18 18 18 20 20 20 25 25 25 30 30 30 35 35 35 40 40 40 45 45 45 50 50 50 15 15 15 18 18 18 20 20 20 25 25 25 30 30

+0.4 / +0.1 +0.4 / +0.1 +0.5 / +0.1 +0.5 / +0.1 +0.6 / +0.1 +0.6 / +0.1 +0.7 / +0.1 +0.7 / +0.1 +0.8 / +0.2 +0.8 / +0.2 +0.8 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +1.0 / +0.2 +1.0 / +0.2 +1.0 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.2 / +0.2 +1.2 / +0.2 +1.2 / +0.2 +1.3 / +0.2 +1.3 / +0.2 +1.3 / +0.2 +1.5 / +0.2 +1.5 / +0.2 +1.5 / +0.2 +1.7 / +0.3 +1.7 / +0.3 +1.7 / +0.3 +2.0 / +0.3 +2.0 / +0.3 +2.0 / +0.3 +0.8 / +0.2 +0.8 / +0.2 +0.8 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +0.9 / +0.2 +1.0 / +0.2 +1.0 / +0.2 +1.0 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.1 / +0.2 +1.2 / +0.2 +1.2 / +0.2

500 1,000 500 1,000 500 1,000 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500

grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey grey red red red red red red red red red red red red red red

2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

17.00 27.00 22.00 37.00 27.00 47.00 22.00 34.00 16.00 27.00 43.00 22.00 36.00 61.00 24.00 40.00 65.00 30.00 53.00 81.00 34.00 59.00 86.00 40.00 68.00 94.00 48.00 77.00 100.00 53.00 83.00 98.00 61.00 97.00 105.00 17.00 25.00 42.00 22.00 35.00 59.00 27.00 44.00 71.00 35.00 49.00 79.00 37.00 60.00

88 THOMAPLAST® II - 2015

Length Colour

Unit

​ 302244 302245 302246 302247 302248 302249 302250 302251 302252 302253

Price

Rods (2 - 210 mm) Outside Ø mm

Tolerance

Length Colour

Unit

Price

mm

mm

​

piece

EURO

30 40 40 40 50 50 50 60 60 60

+1.2 / +0.2 +1.5 / +0.2 +1.5 / +0.2 +1.5 / +0.2 +2.0 / +0.3 +2.0 / +0.3 +2.0 / +0.3 +2.3 / +0.3 +2.3 / +0.3 +2.3 / +0.3

1,000 250 500 1,000 250 500 1,000 250 500 1,000

red red red red red red red red red red

1 1 1 1 1 1 1 1 1 1

97.00 51.00 75.00 109.00 59.00 85.00 127.00 63.00 90.00 144.00

THOMAPLAST®-Square Rod made of PVC (rigid) Application area

• Laboratory technology, electroplating technology, electrical engineering, ventilation technology

Product specification

• Good dielectrical properties • Hot formable • Bondable and weldable • Hardly inflammable • Good resistance to weather • Good chemical resistance

Technical specification

• Material: PVC-U, polyvinyl chloride • Design: extruded • Color: dark gray • Density: 1.42 g/cm3 • Temperature range: 0 to +60 °C, for a short time +75 °C ​

Item ​ 302020 302021 302022 302023 302024 302025 302026 302027 302028 302029

A mm

B mm

Length mm

Unit piece

Price EURO

10 10 15 15 21 21 21 30 30 30

10 10 15 15 21 21 21 30 30 30

500 1,000 500 1,000 250 500 1,000 250 500 1,000

2 2 1 1 1 1 1 1 1 1

22.00 37.00 22.00 37.00 21.00 35.00 59.00 37.00 64.00 101.00

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic THOMAPLAST®-Solid Rod made of PVDF

Item ​

Application area

300423 300424 300425 300426 300427 300428 300429 300430 300431 300432 300433

• Used in chemical apparatus and machine building, especially in the petrochemical, chemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology (pump carrying wheels, flanges, valve bodies etc.).

Product specification

• Heavy-duty plastic • Very good chemical resistance, but limited compared to PTFE • Outstanding hydrolysis resistance • Good temperature resistance coupled with high operating temperature limit • High impact toughness even at low temperatures • Great hardness • High mechanical stability, stiffness and creep strength (in this regard superior to other plastics) • High heat-stability • Thermoplasticly processable • Good electrical insulating properties • Very high dimensional stability • Inherent flame-resistance • Very good radiation resistance • Outstanding UV and weather resistance • Physiologically safe

Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, translucent • Density: 1.78 g/cm3 (ISO 1183) • Temperature range: -60 to +150 °C, for a short time +160 °C • Melting point: +169 °C (ISO 3146) • Flammability rating: UL 94 V-0 (at 1.5 or 3 mm thickness) • Thermal conductivity: 0.19 W/K x m at +23 °C (DIN 52612) • Tensile strength: 50 N/mm2 (yield stress) (ISO 527-2) • Elongation at break: >50 % (ISO 527-2) • Elastic modulus: 2,000 N/mm2 (ISO 527-2) • Notch impact strength: 6 kJ/m2 (ISO 179/1eA) • Rockwell hardness: M 75 (ISO 2039-2) • Dielectric loss factor: at 1 MHz: 0.165 (IEC 60250), at 100 Hz: 0.025 (IEC 60250) • Dielectric strength: 20 kV/mm (IEC 60242-1) • Volume resistivity: 1012 Ohm x m (IEC 60093) • Surface resistivity: 1013 Ohm (IEC 60093) • Tolerance: DIN ISO 3302-1 E2 • Regulations: according to BfR and FDA

Rods (2 - 210 mm) Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

25 30 35 40 45 50 60 70 80 90 100

+0.2 / +1.2 +0.2 / +1.2 +0.2 / +1.6 +0.2 / +1.6 +0.3 / +2.0 +0.3 / +2.0 +0.3 / +2.5 +0.3 / +2.5 +0.4 / +3.0 +0.5 / +3.4 +0.6 / +3.8

500 500 500 500 500 500 500 500 500 500 500

1 1 1 1 1 1 1 1 1 1 1

129.00 168.00 214.00 245.00 302.00 359.00 417.00 504.00 522.00 653.00 802.00

THOMAPLAST®-Solid Rod made of Glass Ceramic Product specification

• Highest temperature ceramic • Absolute chemical resistance • No uptake of humidity • Non-porous, not deformable • Great hardness • Outstanding insulating material at high voltages, a high frequency range at high temperatures • Achievable manufacturing tolerances up to 0.013 mm • Achievable surface roughness >0.5 µm to 0.013 µm (polished) • Processing can be done with usual metal processing tools for metal (metal cutting), thus purchase of expensive diamond tools is not necessary

Technical specification

• Material: glass ceramic • Colour: white • Temperature range: -200 to +800 °C, for a short time +1,000 °C • Special features: highest temperature loadability, great hardness, achievable manufacturing tolerances up to 0.013 mm • Expansion coefficient: at -200 to +25 °C: 74 x 10-7 / °C, at +25 to +800 °C: 126 x 10-7 / °C • Specific heat (+25 °C): 0.79 kJ/kg x K • Heat conduction (+25 °C): 1.46 W/m °C • Heat diffusion (+25 °C): 7.3 x 10-7 m2/s • Density: 2.52 g/cm3 • Porosity: 0 % • Elastic modulus: 66.9 GPa (Youngs modulus) • Shear modulus: 25.5 GPa • Rockwell hardness: M 48 • Tensile strength: 94 MPa (modulus of rupture) • Pressure resistance: 345 MPa • Breaking strength: 1.53 MPa M 0.5 • Dielectric constant: 6.03 at 1 kHz; 5.67 at 8.5 GHz • Dielectric strength (GS/WS): 40 kV/mm at 0.01 thickness, +25 °C • GS-Volume resistivity: >1016 Ohm/cm

​

​

Item ​ 300420 300421 300422

Outside Ø mm

Tolerance mm

Length mm

Unit piece

Price EURO

10 16 20

+0.1 / +0.5 +0.2 / +0.9 +0.2 / +0.9

500 500 500

1 1 1

56.00 79.00 97.00

THOMAPLAST® II - 2015 89

Semi-Finished Products - Elastomers, Plastics and Glass Ceramic Item ​ 300525 300526 300527 300528

Outside Ø mm

Length mm

Unit piece

Price EURO

10 15 20 25

100 100 100 100

1 1 1 1

167.00 210.00 254.00 300.00

Rods (2 - 210 mm)

• Compressive strength: II: 450 MPa; +: 90 MPa • Compressive stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 25 MPa (short-term); 20 MPa (long-term) • Compressive modulus: II: 1,000 MPa; +: 4,000 MPa

​

THOMASTABIL®-Solid Rod made of Glass Fiber Reinforced Plastic GFRP Application area:

• Laboratory technology, electroplating technology, electrical engineering

Product specification:

• Self-extinguishing and halogen-free • Linear stress-strain behavior, low weight • Electrically insulating, chemical-resistant • Corrosion-resistant and weatherproof • UV-resistant, thermally insulating • High economic efficiency, high stability • Metal-free, unmagnetic • The unsaturated polyester resins are among the most commonly used resins in composite materials. UP resins are a colourless to slightly yellow solution of unsaturated polyester in a reactive solvent, usually styrene. At room temperature or by supply of heat, they are cured, whereby a heat reaction is released.

Item ​ 306480 306481 306482 306483 306484 306485 306486 306487 306488 306489 306490 306491 306492 306493 306494 306495 306496 306497 306498 306499 306500 306501 306502 306503

Technical specification:

• Material: Resin: polyester Reinforcing fibers: glass fibers • Design: pultruded • Color: dark gray / white • Density: 2 g/cm3 • Temperature range: -100 to +155 °C, for a short time +180 °C • Impact toughness (IZOD): 300 kJ/m2 • Interlaminar shear strength: 25 MPa • Volume resistivity: 1010 - 1015 Ohm * cm • Surface resistance: 1010 - 1015 Ohm • Breakdown strength: 5 - 10 kV/mm • Comparative tracking index (CTI): KA 3c / KB 500 / KC 600 • Dielectric constant: <5 • Coefficient of linear thermal expansion: 12 x 10-6 1/K • Thermal conductivity: 0.2 - 0.6 W/m*K • Specific heat capacity: 1.0 - 1.2 kJ/kg*K • Water absorption: 0.15 % • Dimensional stability by Martens method: +200 °C • Resistance to glow heat: level 2b • Elongation at break: 1.0 - 1.8 % • Barcol hardness: >40 • Tolerances diameter: 0 - 10 mm ±0.20 mm 10 - 20 mm ±0.30 mm, 20 - 40 mm ±0.35 mm • Fire class: B2, UL94 V-1, UL 94 V-0, DIN 5510 S4 SR2, ST2, ASTM E84 < 25, ASTM D635 All following measured values are depending on the test direction: parallel (II) or perpendicular (+) to the fibers.

• Tensile strength: II: 250 MPa; +: 30-80 MPa • Tension stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 20 MPa (short-term); 15 MPa (long-term) • Bending strength: II: 250 MPa; +: 30-80 MPa • Bending stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 20 MPa (short-term); 15 MPa (long-term) • Elastic modulus tensile strength: II: 23,000 MPa; +: 8,000 MPa • Elastic modulus bending: II: 25,000 MPa; +: 9,000 MPa

90 THOMAPLAST® II - 2015

A mm

Unit mm

Price EURO

2 2 3 3 4 4 5 5 6 6 8 8 9 9 10 10 12 12 16 16 18 18 20 20

500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000

20.00 36.00 22.00 40.00 24.00 46.00 28.00 50.00 34.00 62.00 38.00 66.00 46.00 80.00 48.00 84.00 60.00 104.00 74.00 128.00 90.00 156.00 96.00 166.00

Metals THOMASTABIL®-Solid Rod made of Aluminum ​

Semi-Finished Products - Metals

Rods (2 - 210 mm)

Product specification

Item ​

• Material standard BS 1474 HE3OTF (1972) • Material: AIBS 1474 Item ​ 300586 300587 300588 300589 300590

Outside Ø mm

Length mm

Unit piece

Price EURO

6.35 12.7 19.05 25.4 38.1

610 610 610 610 610

1 1 1 1 1

19.00 25.00 35.00 48.00 76.00

THOMASTABIL®-Square Rod made of Aluminum Product specification

• Material standard BS 1474 HETF (1972) • Material: AIBS 1474

300571 300572 300573 300574 300575 300576

Outside Ø mm

Length mm

Unit piece

Price EURO

10 12 14 18 20 25

1,000 1,000 1,000 1,000 1,000 1,000

1 1 1 1 1 1

45.00 48.00 65.00 87.00 110.00 133.00

THOMASTABIL®-Solid Rod made of Copper Product specification

• Highly conductive • Corrosion-proof • Formable as solid rod, pipe or sheet • Material standard BS 2870/C 101 (1980)

​

Technical specification

• Analysis for copper: 99.90 %, lead 0.005 %, bismuth 0.001 % • Tensile strength: 240 N/mm2 (for solid rods and sheets) ​

Item ​

Width mm

Height mm

Length mm

Unit piece

Price EURO

300591 300592 300593

19.05 25.4 50.8

3.2 3.2 3.2

610 610 610

1 1 1

27.00 30.00 39.00

Item ​ 300561 300562 300563 300564 300565 300566

THOMASTABIL®-Solid Rod made of Stainless Steel Product specification

• Seamless type 316L according to ASTM 269 • Austenitic, corrosion-proof and antimagnetic steel • Easy to process and to polish • Improvement of mechanical properties by cold processing • Typical use in chemical engineering, food processing, gas and oil industries, in hospital engineering and in vehicle construction, wherever corrosion resistance is required. ​

Outside Ø mm

Length mm

Unit piece

Price EURO

3 6 12 15 20 25

1,000 1,000 1,000 1,000 1,000 1,000

1 1 1 1 1 1

13.00 25.00 80.00 114.00 142.00 191.00

THOMASTABIL®-Solid Rod made of Brass Product specification

• Machine quality • Turned material • Processing to bolts, gearwheels etc. ​

Item ​ 300569 300570

Outside Ø mm

Length mm

Unit piece

Price EURO

4 6

1,000 1,000

1 1

23.00 28.00

THOMAPLAST® II - 2015 91

Semi-Finished Products Item ​ 300544 300545 300546 300547 300548 300549 300550 300551 300552 300553 300554 300555

Pipes (4 - 112 mm)

Outside Ø mm

Length mm

Unit piece

Price EURO

3 5 6 12 15 18 21 24 6.35 12.7 19.05 25.4

500 500 500 500 500 500 500 500 610 610 610 610

1 1 1 1 1 1 1 1 1 1 1 1

28.00 32.00 33.00 54.00 71.00 87.00 116.00 127.00 34.00 71.00 97.00 127.00

Pipes (4 - 112 mm) THOMAPLAST®-Pipe made of PA - extruded Product specification

• Good mechanical stability, good impact toughness • Very good wear resistance • Good coefficient of sliding friction, good temperature resistance • Good electrical insulating properties

Technical specification

• Material: PA 6 (polyamide) • Colour: natural and black (material addition: MoS2 molybdenum sulphide) • Shore hardness D: 72° - 82° (DIN 53505) • Temperature range: -40 to +85 °C, for a short time +160 °C • Melting point: +220 °C (DIN 53736) • Density: 1.14 g/cm3 (DIN 53479) • Tensile strength: 78 N/mm2 (DIN 53455) • Elongation at break: >50 % (DIN 53455) • Notch impact strength: 4 kJ/m2 (DIN 53453) • Elastic modulus: 3,100 N/mm2 (DIN 53457) • Thermal conductivity: 0.28 W/K x m (DIN 52612) • Dielectric constant: 3.9 at 50 Hz (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482) ​

Item ​ 301781 301782 301783 301784 301785 301786 301787 301788 301789 301790 301791 301792 301793 301794 301795 301796 301797 301798 301799 301800 301801 301802 301803 301804 301805 301806 301807 301808 301809 301810 301811 301812 301813 301814 301815 301816 301817 301818 301819 301820 301821 301822 301823

Inside Outside Ø Ø mm mm 10 15 15 15 15 15 15 15 15 15 15 15 15 17 17 17 17 17 17 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 35 35 35 40 40 40

20 25 25 25 25 25 25 32 32 32 32 32 32 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 50 50 50 51 51 51 60 60 60 55 55 55 60 60 60

Tolerance outside Ø mm

Length

Colour

Price

mm

​

EURO

+1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.0 / +0.6 +2.5 / +0.8 +2.5 / +0.8 +2.5 / +0.8 +2.5 / +0.8 +2.5 / +0.8 +2.5 / +0.8 +2.5 / +0.8 +2.5 / +0.8 +2.5 / +0.8

1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000 250 500 1,000

black nature nature nature black black black nature nature nature black black black nature nature nature black black black nature nature nature nature nature nature black black black nature nature nature black black black black black black nature nature nature nature nature nature

105.00 47.00 70.00 108.00 54.00 80.00 121.00 67.00 95.00 141.00 77.00 105.00 151.00 80.00 108.00 151.00 93.00 126.00 164.00 75.00 105.00 159.00 100.00 131.00 190.00 82.00 118.00 177.00 123.00 162.00 218.00 172.00 215.00 259.00 192.00 238.00 284.00 100.00 144.00 202.00 110.00 159.00 220.00

THOMAPLAST®-Pipe made of PTFE (virgin) - extruded Product specification Item ​ 301776 301777 301778 301779 301780

Inside Outside Ø Ø mm mm 10 10 10 10 10

20 20 20 20 20

Tolerance outside Ø mm

Length mm

​

EURO

+1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4 +1.1 / +0.4

250 500 1,000 250 500

nature nature nature black black

34.00 54.00 87.00 39.00 62.00

92 THOMAPLAST® II - 2015

Colour

Price

• Heavy-duty plastic • Very good chemical resistance to any organic and inorganic media • No water absorption • Very good temperature resistance • Outstanding coefficient of sliding friction • Excellent resistance to weather • Antiadhesive surface • Very low friction values • Very good dielectric properties independent of frequency and temperature

Semi-Finished Products

Pipes (4 - 112 mm)

• Very good electrical insulating capacity also at air humidity • Non-combustible • High tracking resistance • Highest gas-tightness • Resistant to stress cracks • High-quality technical plastic for chemical apparatus construction, process engineering, machine construction, and electrical engineering • Use in machine building and precision mechanical engineering: packings, piston rings, slide bearings, thread sealing tapes • Use in chemical industry: packings, pumps, valves, filter bodies, heat exchanger, laboratory devices • Use in electrical engineering: insulators in heavy current engineering and HF technology, line switches, tube sockets

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Shore hardness D: 55° - 59° (DIN 53505) • Special features: non-combustible, very good resistance to weather • Temperature range: -200 to +260 °C, for a short time +280 °C • Melting point: +320 °C • Density: 2.15 - 2.18 g/cm3 (DIN 53479) • Tensile strength: 20 - 40 N/mm2 (DIN 53455) • Elongation at break: 250 - 500 % (ASTM D638) • Notch impact strength: 16 kJ/m2 • Pressure resistance: 3.9 - 4.4 N/mm2 (1 % deformation at +23 °C) • Thermal conductivity: 0.26 W/K x m (ASTM C 117) • Dielectric constant: 2.1 at 50 Hz (DIN 53483) • Tolerance: DIN ISO 3302-1 E2 ​

Item ​ 300209 300210 300211 300212 300213 300214 300215 300216 300217 300218 300219 300220 300221 300222 300223 300224 300225 300226 300227 300228

Inside Ø mm

Outside Ø mm

Length mm

Unit piece

Price EURO

6 6 8 10 10 10 10 15 10 15 10 15 10 15 10 15 20 20 10 20

10 12 14 15 16 18 20 20 22 22 25 25 27 27 30 30 30 33 35 35

250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250

2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23.00 19.00 24.00 20.00 24.00 32.00 39.00 25.00 44.00 32.00 59.00 53.00 75.00 64.00 84.00 81.00 74.00 85.00 111.00 100.00

Item ​ 300229 300230 300231 300232 300233 300234 300235 300236 300237 300238 300239 300240 300241 300242 300243 300244 300245 300246 300247 300248 300249 300250 300251 300252 300253 300254 300255 300256 300257 300258 300259 300260 300261 300262 300263 300264 300265 300266 300267 300268 300269 300270 300271 300272 300273 300274 300275 300276 300277 300278 300279 300280 300281 300282 300283 300284

Inside Ø mm

Outside Ø mm

Length mm

Unit piece

25 20 25 30 20 25 30 25 30 40 20 30 40 20 30 40 20 30 40 50 6 6 8 10 10 10 10 15 10 15 10 15 10 15 10 15 20 20 10 20 25 20 25 30 20 25 30 25 30 40 20 30 40 20 30 40

35 40 40 40 45 45 45 50 50 50 55 55 55 60 60 60 65 65 65 65 10 12 14 15 16 18 20 20 22 22 25 25 27 27 30 30 30 33 35 35 35 40 40 40 45 45 45 50 50 50 55 55 55 60 60 60

250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Price EURO 88.00 121.00 109.00 96.00 167.00 145.00 120.00 189.00 167.00 106.00 211.00 173.00 126.00 230.00 198.00 153.00 281.00 244.00 204.00 156.00 24.00 35.00 45.00 39.00 45.00 62.00 75.00 50.00 86.00 62.00 112.00 101.00 143.00 122.00 162.00 154.00 142.00 163.00 210.00 189.00 167.00 230.00 206.00 180.00 316.00 274.00 228.00 373.00 316.00 201.00 400.00 329.00 239.00 434.00 375.00 290.00

THOMAPLAST® II - 2015 93

Semi-Finished Products Item ​ 300285 300286 300287 300288 300289 300290 300291 300292 300293 300294 300295 300296 300297 300298 300299 300300 300301 300302 300303 300304 300305 300306 300307 300308 300309 300310 300311 300312 300313 300314 300315 300316 300317 300318 300319 300320 300321 300322 300323 300324 300325 300326 300327 300328

Pipes (4 - 112 mm)

Inside Ø mm

Outside Ø mm

Length mm

Unit piece

Price EURO

20 30 40 50 6 6 8 10 10 10 10 15 10 15 10 15 10 15 10 15 20 20 10 20 25 20 25 30 20 25 30 25 30 40 20 30 40 20 30 40 20 30 40 50

65 65 65 65 10 12 14 15 16 18 20 20 22 22 25 25 27 27 30 30 30 33 35 35 35 40 40 40 45 45 45 50 50 50 55 55 55 60 60 60 65 65 65 65

500 500 500 500 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

531.00 463.00 387.00 295.00 42.00 67.00 86.00 72.00 86.00 117.00 143.00 90.00 162.00 117.00 230.00 193.00 268.00 234.00 302.00 291.00 265.00 305.00 365.00 340.00 309.00 398.00 346.00 325.00 538.00 476.00 399.00 620.00 543.00 345.00 674.00 562.00 409.00 712.00 613.00 390.00 828.00 746.00 625.00 467.00

Item ​ 302254 302255 302258 302259 302260 302256 302257 302261 302262 302264 302263

Inside Outside Tolerance Ø Ø outside Ø mm mm mm 28.5 28.5 29.5 29.5 35 39 39 39 48 59 77

52 52 71 71 90 67 67 81 81 112 112

±0.45 ±0.45 ±0.45 ±0.45 ±0.6 ±0.45 ±0.45 ±0.6 ±0.6 ±0.6 ±0.6

Length

Unit

Price

mm

piece

EURO

250 500 250 500 250 250 500 250 250 250 245

1 1 1 1 1 1 1 1 1 1 1

138.00 205.00 199.00 264.00 243.00 183.00 255.00 216.00 224.00 312.00 285.00

THOMAPLAST®-Pipe made of PVC (rigid) Product specification

• High mechanical stability • UV-stabilized • Good dielectrical properties • Good chemical resistance • Resistant to weather and corrosion • Bondable and weldable

Technical specification

• Material: rigid PVC (rigid polyvinyl chloride) • Colour: dark-grey • Density: 1.42 g/cm3 • Design: extruded • Temperature range: 0 to +60 °C, for a short time +75 °C ​

Vulkollan®-Pipe - Shore 92° Product specification

• Hard elastic behaviour, weather resistant, can be machine processed

Technical specification

• Material: PUR (polyurethane based on polyesterpolyol / DESMODUR 15) • Colour: brown • Shore hardness A: 92° ±5 (DIN 53505) • Temperature range: -40 to +80 °C • Density: 1.26 g/cm3 • Type of production: cast and tempered ®

​

94 THOMAPLAST® II - 2015

Item ​ 301984 301985 301986 301987

Inside Outside Ø Ø mm mm 4 4 6 6

6 6 8 8

Tolerance outside Ø mm

Length

Unit

Price

mm

piece

EURO

+0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0

500 1,000 500 1,000

2 2 2 2

17.00 25.00 19.00 31.00

Semi-Finished Products Item ​ 301988 301989 301990 301991 301992 301993 301994 301995 301996 301997 301998 301999 302000 302001 302002 302003 302004 302005 302006 302007

Inside Outside Ø Ø mm mm 7.6 7.6 9.2 9.2 13.6 13.6 17 17 21.2 21.2 27.2 27.2 36.2 36.2 42.6 42.6 42.6 63.8 63.8 63.8

10 10 12 12 16 16 20 20 25 25 32 32 40 40 50 50 50 75 75 75

Pipes (4 - 112 mm)

Tolerance outside Ø mm

Length

Unit

Price

mm

piece

EURO

+0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.2 / -0 +0.3 / -0 +0.3 / -0 +0.3 / -0

500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 250 500 1,000 250 500 1,000

2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

22.00 37.00 25.00 39.00 27.00 43.00 22.00 33.00 23.00 34.00 25.00 40.00 27.00 41.00 32.00 49.00 80.00 32.00 49.00 80.00

• Dielectric constant: <5 • Coefficient of linear thermal expansion: 12 x 10-6 1/K • Thermal conductivity: 0.2 - 0.6 W/m*K • Specific heat capacity: 1.0 - 1.2 kJ/kg*K • Water absorption: 0.15 % • Dimensional stability by Martens method: +200 °C • Resistance to glow heat: level 2b • Elongation at break: 1.0 - 1.8 % • Barcol hardness: >40 • Tolerances: Pipe diameter: 0 - 10 mm ±0.20 mm, 10 - 20 mm ±0.30 mm, 20 - 40 mm ±0.35 mm Wall thickness: 0 - 2 mm ±0.30 mm, 2 - 5 mm ±0.35 mm, 5 - 10 mm ±0.40 mm • Fire class: B2, UL94 V-1, UL 94 V-0, DIN 5510 S4 SR2, ST2, ASTM E84 < 25, ASTM D635 All following measured values are depending on the test direction: parallel (II) or perpendicular (+) to the fibers.

• Tensile strength: II: 250 MPa; +: 30-80 MPa • Tension stress: II: 135 MPa (short-term); 70 MPa (long-term)

​

THOMASTABIL®-Tube made of Glass Fiber Reinforced Plastic GFRP Product spezification

• The pultruded GFRP tubes are not suitable for internal pressure actions on applications. ​

THOMASTABIL®-Tubes made of Glass Fiber Reinforced Plastic GFRP Application area:

• Laboratory technology, electroplating technology, electrical engineering

General product specification:

• Self-extinguishing and halogen-free • Linear stress-strain behavior • Low weight • Electrically insulating • Chemical-resistant • Corrosion-resistant and weatherproof • UV-resistant • High economic efficiency • High stability • Metal-free, unmagnetic • Thermally insulating • The unsaturated polyester resins are among the most commonly used resins in composite materials. UP resins are a colourless to slightly yellow solution of unsaturated polyester in a reactive solvent, usually styrene. At room temperature or by supply of heat, they are cured, whereby a heat reaction is released.

General technical specification:

• Material: Resin: polyester Reinforcing fibers: glass fibers • Design: pultruded • Color: dark gray / white • Density: 2 g/cm3 • Temperature range: -100 to +155 °C, for a short time +180 °C • Impact toughness (IZOD): 300 kJ/m2 • Interlaminar shear strength: 25 MPa • Volume resistivity: 1010 - 1015 Ohm * cm • Surface resistance: 1010 - 1015 Ohm • Breakdown strength: 5 - 10 kV/mm • Comparative tracking index (CTI): KA 3c / KB 500 / KC 600

Item ​ 306450 306451 306452 306453 306454 306455 306456 306457 306458 306459 306460 306461 306462 306463

B mm

A mm

Unit mm

Price EURO

14 14 17 17 22 22 20 20 24 24 26 26 32 32

20 20 22 22 28 28 30 30 30 30 32 32 40 40

500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000

36.00 60.00 38.00 64.00 44.00 74.00 48.00 80.00 50.00 85.00 60.00 98.00 68.00 112.00

THOMAPLAST® II - 2015 95

Semi-Finished Products

Cords (0.8 - 30 mm)

THOMASTABIL®-Rectangular Tube made of Glass Fiber Reinforced Plastic GFRP

Item ​

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 12 12 15 15 20 20

±0.40 ±0.40 ±0.40 ±0.40 ±0.50 ±0.50 ±0.50 ±0.50 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.80 ±0.80 ±0.80 ±0.80 ±1.00 ±1.00

9 9 16 16 25 25 35 35 48 48 63 63 79 79 98 98 141 141 221 221 393 393

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5 1 3

34.00 58.00 48.00 84.00 56.00 98.00 62.00 108.00 74.00 130.00 80.00 140.00 121.00 223.00 128.00 222.00 98.00 140.00 148.00 216.00 76.00 196.00

​

Item ​ 306470 306471 306472 306473 306474 306475 306476 306477

A mm

B mm

C mm

Unit mm

Price EURO

30 30 30 30 38 38 40 40

15 15 30 30 38 38 40 40

2.5 2.5 2.5 2.5 3 3 5 5

500 1,000 500 1,000 500 1,000 500 1,000

50.00 84.00 72.00 106.00 92.00 154.00 112.00 188.00

13309 13310 13311 13312 13313 13314 13315 13316 13317 13318 13319 13320 13321 13322 13323 13324 13325 13326 13327 13328 13329 13330

THOMAPLAST®-High-Tech Round Cord made of EPDM

Cords (0.8 - 30 mm)

Product specification

THOMAPLAST®-High-Tech Round Cord made of CR Product specification

• Good elastic behavior • Good abrasion resistance • Good heat resistance • Good resistance to weather, aging, and ozone • High flame-resistance • Good chemical resistance to dilute acids and alkalis as well as mineral oils

• Very good resistance to weather • Good elastic behavior • Good resistance to heat, cold, and aging • Good resistance to weather, aging, and ozone • Good chemical resistance to hot water and steam, glycol brake fluids, many acids and alkalis as well as polar solvents.

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber) • Colour: black • Shore hardness A: 70° ±5° (DIN 53505) • Temperature range: -25 to +120 °C

Technical specification

​

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -25 to +90 °C ​

Item ​

Item ​ 13307 13308

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

2 2

±0.35 ±0.35

4 4

5 10

39.00 64.00

96 THOMAPLAST® II - 2015

13333 13334 13335 13336 13337 13338

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

2 2 2.5 2.5 3 3

+0.3 / -0.1 +0.3 / -0.1 +0.3 / -0.1 +0.3 / -0.1 +0.35 / -0.15 +0.35 / -0.15

4 4 7 7 10 10

5 10 5 10 5 10

80.00 136.00 85.00 144.00 87.00 146.00

Semi-Finished Products Item ​ 13339 13340 13341 13342 13343 13344 13345 13346 13347 13348 13349 13350 13351 13352 13353 13354 13355 13356 13357 13358 13359 13360 13361 13362 13363 13364 13365 13366 13367 13368

Cords (0.8 - 30 mm)

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

3.5 3.5 4 4 5 5 5.3 5.3 5.7 5.7 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15

+0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.4 / -0.25 +0.4 / -0.25 +0.4 / -0.25 +0.4 / -0.25 +0.4 / -0.25 +0.4 / -0.25 +0.45 / -0.25 +0.45 / -0.25 +0.5 / -0.25 +0.5 / -0.25 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3 +0.7 / -0.3

13 13 17 17 27 27 30 30 34 34 38 38 52 52 68 68 85 85 105 105 126 126 150 150 175 175 203 203 232 232

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5 3 5 3 5 3 5 3 5

90.00 159.00 95.00 174.00 98.00 177.00 100.00 182.00 105.00 195.00 110.00 202.00 126.00 231.00 128.00 236.00 141.00 261.00 100.00 156.00 118.00 179.00 136.00 208.00 159.00 241.00 167.00 254.00 172.00 264.00

THOMAPLAST®-High-Chem Round Cord made of EPDM/PP - technical Product specification

• Extremely elastic thermoplastic elastomer • Very high resistance to many alkalis, acids, oxidants, and polar solvents, except to mineral oils, fuels and hydraulic fluids.

• Very good resistance to aging, ozone, UV-radiation and weather.

• Resistant to hot water and antifreeze agents.

• Suitable for joining with adhesives and heat-sealing.

• Mechanically highly loadable and very good abrasion resistance.

• The material is recyclable.

Technical specification

• Material: EPDM/PP (thermoplastic elastomer); compound of EPDM and PP, as well as stabilizing additives; EPDM (ethylene-propylene-diene rubber); PP (polypropylene) • Colour: black • Shore hardness A: 65° ±5° (DIN 53503) • Temperature range: -45 to +120 °C • Compressibility: 24 % at +23 °C / 22 h • Tearing strength: 70 kg/cm2 • Elongation at break: 375 % • Tolerance: DIN ISO 3302-1 E2 ​

Item ​

Outside Ø mm

Unit m

Price EURO

2 2 2.5 2.5 3 3 3.5 3.5 4 4 5 5 5.33 5.33 6 6 7 7 8 8 9 9 10 10 11 11 12 12 14 14 15 15 16 16 18 18 20 20

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

56.00 98.00 56.00 98.00 56.00 98.00 64.00 112.00 72.00 126.00 76.00 130.00 78.00 138.00 82.00 144.00 98.00 170.00 104.00 182.00 118.00 204.00 140.00 240.00 148.00 252.00 162.00 275.00 210.00 350.00 232.00 378.00 250.00 400.00 292.00 454.00 320.00 480.00

339410 339411 339412 339413 339414 339415 339416 339417 339418 339419 339420 339421 339422 339423 339424 339425 339426 339427 339428 339429 339430 339431 339432 339433 339434 339435 339436 339437 339438 339439 339440 339441 339442 339443 339444 339445 339446 339447

THOMAPLAST®-High-Pharm Round Cord made of EPDM/PP - FDA Application area

• Pharmaceutical technology, medical engineering, food technology, container construction, beverage industry, biotechnology, chemical technology, filling technics, machine engineering, cellar technology

THOMAPLAST® II - 2015 97

Semi-Finished Products

Cords (0.8 - 30 mm)

Product specification

• Extremely elastic thermoplastic elastomer for pharmaceutical engineering, food technology, and medical engineering • Very high resistance to many alkalis, acids, oxidants, and polar solvents, except to mineral oils, fuels, hydraulic fluids, and hydrocarbons.

• Very good resistance to aging, ozone, UV-radiation and weather • Suitable for joining with adhesives and heat-sealing • Mechanically highly loadable, dimensionally stable and resistant to bending.

Technical specification

• Material: EPDM/PP (thermoplastic elastomer); compound of EPDM and PP, as well as stabilizing additives; EPDM (ethylene-propylene-diene rubber); PP (polypropylene) • Colour: beige • Shore hardness A: 64° ±5° (DIN 53503) • Temperature range: -45 to +135 °C, for a short time +150 °C • Density: 0.97 g/cm3 • Compression set: 24 % at +23 °C / 22 h • Tearing strength: 70 kg/cm2 • Elongation at break: 375 % • Tolerance: DIN ISO 3302-1 E2 • Regulations: FDA § 177.2600; conforming to LMBG (German Food and Commodities Act)

THOMAPLAST®-High-Tech Round Cord made of FPM Product specification

• Very good resistance to ozone, oxygen, aging, and weather • Very good heat resistance • Very good chemical resistance, especially to mineral, vegetable, and animal oils, fuels, many alkalis, acids, and solvents • Not resistant to polar solvents

Technical specification

• Material: FPM (fluorinated rubber) • Colour: black • Shore hardness A: 75° ± 5° (DIN 53505) • Temperature range: -20 to +200 °C, for a short time +220 °C • Tolerance: DIN ISO 3302-1 E2 ​

​

Item ​

Item ​ 302607 302608 302609 302610 302611 302612 302613 302614 302615 302616 302617 302618 302619 302620 302621 302622 302623 302624 302625 302626

Outside Ø mm

Unit m

Price EURO

2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 12 12

5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15 5 15

70.00 180.00 78.00 198.00 88.00 226.00 102.00 264.00 124.00 318.00 154.00 396.00 168.00 432.00 196.00 494.00 228.00 576.00 252.00 602.00

98 THOMAPLAST® II - 2015

13487 13488 13489 13490 13491 13492 13493 13494 13495 13496 13497 13498 13499 13500 13501 13502 13503 13504 13505 13506 13507 13508 13509 13510 13511 13512 13513 13514 13515 13516 13517 13518

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

2 2 2.5 2.5 3 3 3.5 3.5 4 4 4.5 4.5 5 5 5.3 5.3 5.7 5.7 6 6 6.5 6.5 7 7 8 8 8.4 8.4 9 9 10 10

+0.3 / -0.1 +0.3 / -0.1 +0.3 / -0.2 +0.3 / -0.2 +0.3 / -0.2 +0.3 / -0.2 +0.3 / -0.2 +0.3 / -0.2 +0.4 / -0.2 +0.4 / -0.2 +0.4 / -0.2 +0.4 / -0.2 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.4 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.3 +0.5 / -0.35 +0.5 / -0.35

6 6 10 10 13 13 18 18 23 23 30 30 36 36 41 41 47 47 52 52 61 61 70 70 92 92 102 102 117 117 145 145

1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3

39.00 105.00 46.00 126.00 49.00 136.00 54.00 151.00 57.00 156.00 64.00 172.00 69.00 192.00 77.00 218.00 80.00 215.00 87.00 241.00 92.00 254.00 100.00 271.00 105.00 289.00 113.00 300.00 116.00 302.00 118.00 310.00

Semi-Finished Products Item ​ 13519 13520 13521 13522 13523 13524 13525

Cords (0.8 - 30 mm)

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

11 12 14 15 18 20 25

+0.55 / -0.35 +0.55 / -0.35 +0.6 / -0.4 +0.6 / -0.4 E2 DIN 7715 E2 DIN 7715 E2 DIN 7715

174 207 282 324 440 598 747

1 1 1 1 1 1 1

126.00 128.00 141.00 156.00 172.00 197.00 305.00

THOMAPLAST®-High-Tech Round Cord made of NBR - Shore 70° Product specification

• Good abrasion resistance • Good heat resistance • Good resistance to mineral oils and fuels, best resistance to vegetable and animal oils, silicones, as well as dilute acids and alkalis at room temperature

Technical specification

• Material: NBR (butadiene-acrylonitrile rubber, nitrile rubber) • Colour: black • Shore hardness A: 65° or 70° ±5° (DIN 53505) • Temperature range: -30 to +100 °C • Tolerance: DIN ISO 3302-1 E2

THOMAPLAST -High-Tech Round Cord made of NBR - Shore 50° ®

Product specification

​

• Good abrasion resistance • Good heat resistance • Good resistance to mineral oils and fuels, best resistance to vegetable and animal oils, silicones, as well as dilute acids and alkalis at room temperature

Technical specification

• Material: NBR (butadiene-acrylonitrile rubber, nitrile rubber) • Colour: black • Shore hardness A: 50° ±5° (DIN 53505) • Temperature range: -30 to +100 °C ​

Item ​

Item ​ 13249 13250 13251 13252 13253 13254 13255 13256 13257 13258 13259 13260 13261 13262 13263 13264

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

3 3 4 4 5 5 6 6 7 7 8 8 10 10 12 12

±0.35 ±0.35 ±0.35 ±0.35 ±0.40 ±0.40 ±0.40 ±0.40 ±0.50 ±0.50 ±0.50 ±0.50 ±0.50 ±0.50 ±0.50 ±0.50

8.5 8.5 15 15 23 23 34 34 46 46 60 60 93 93 135 135

5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5

49.00 90.00 49.00 90.00 54.00 100.00 72.00 136.00 92.00 161.00 100.00 192.00 141.00 259.00 118.00 182.00

13369 13370 13371 13372 13373 13374 13375 13376 13377 13378 133791 133801 13381 13382 13383 13384 133851 133861 13387 13388 133891 133901 13391 13392 13393 13394 133951 133961 13397 13398 133991

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

1 1 1.5 1.5 1.78 1.78 2 2 2.5 2.5 3 3 3.2 3.2 3.53 3.53 4 4 4.75 4.75 5 5 5.33 5.33 5.7 5.7 6 6 6.4 6.4 7

+0.20 / -0 +0.20 / -0 +0.20 / -0.10 +0.20 / -0.10 +0.20 / -0.10 +0.20 / -0.10 +0.30 / -0.10 +0.30 / -0.10 +0.30 / -0.10 +0.30 / -0.10 +0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.35 / -0.15 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.45 / -0.20 +0.50 / -0.20

1 1 2 2 3 3 4 4 6 6 9 9 10 10 12 12 16 16 22 22 25 25 28 28 32 32 35 35 40 40 48

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

36.00 62.00 39.00 64.00 41.00 72.00 44.00 77.00 46.00 82.00 52.00 90.00 54.00 95.00 57.00 98.00 59.00 105.00 62.00 108.00 64.00 113.00 67.00 116.00 69.00 118.00 72.00 126.00 75.00 128.00 77.00

THOMAPLAST® II - 2015 99

Semi-Finished Products Item ​ 134001 13401 13402 134031 134041 13405 13406 13407 13408 13409 13410 134111 134121 13413 13414 134151 134161 13417 13418 13419 13420 13421 13422 13423 13424 13425 13426 13427 13428 13429 13430 13431 13432 13433 13434 13435 13436 1

Cords (0.8 - 30 mm)

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

7 7.5 7.5 8 8 8.4 8.4 9 9 9.5 9.5 10 10 11 11 12 12 12.7 12.7 13 13 14 14 15 15 16 16 18 18 20 20 22 22 25 25 30 30

+0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.50 / -0.20 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.55 / -0.30 +0.60 / -0.30 +0.60 / -0.30 +0.60 / -0.30 +0.60 / -0.30 +0.60 / -0.30 +0.60 / -0.30 +0.80 / -0.40 +0.80 / -0.40 +0.80 / -0.50 +0.80 / -0.50 +0.80 / -0.50 +0.80 / -0.50 +0.80 / -0.50 +0.80 / -0.50 +0.80 / -0.50 +0.80 / -0.50

48 55 55 63 63 70 70 80 80 88 88 100 100 120 120 143 143 157 157 166 166 191 191 222 222 250 250 320 320 395 395 487 487 617 617 888 888

10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5 3 5 3 5 3 5 3 5 1 3 1 3

133.00 80.00 136.00 82.00 139.00 87.00 156.00 100.00 182.00 103.00 187.00 105.00 190.00 121.00 220.00 128.00 236.00 136.00 248.00 141.00 259.00 90.00 139.00 92.00 149.00 108.00 164.00 116.00 177.00 128.00 197.00 146.00 223.00 80.00 215.00 116.00 305.00

Shore hardness A: 65° ±5°

THOMAPLAST®-High-Tech Round Cord made of NR - beige Product specification

• High tearing strength • Very good elastic, mechanical properties • Very high abrasion resistance • High cohesive friction • Good resistance to acids and alkalis

Technical specification

• Material: NR (natural rubber) • Colour: beige, similar to RAL 1001 • Shore hardness A: 45° ±5° (DIN 53505) • Temperature range: -40 to +80 °C ​

100 THOMAPLAST® II - 2015

Item ​ 13221 13222 13223 13224 13225 13226 13227 13228 13229 13230 13231 13232 13233 13234 13235 13236 13237 13238

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

3 3 4 4 5 5 6 6 7 7 8 8 10 10 12 12 20 20

±0.40 ±0.40 ±0.40 ±0.40 ±0.50 ±0.50 ±0.50 ±0.50 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.80 ±0.80 ±1.00 ±1.00

9 9 17 17 25 28 35 35 50 50 65 65 100 100 145 145 395 395

5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5 1 3

39.00 67.00 57.00 105.00 67.00 120.00 82.00 149.00 100.00 187.00 120.00 220.00 100.00 156.00 138.00 210.00 110.00 299.00

THOMAPLAST®-High-Pharm Round Cord made of NR - red Product specification

• High tearing strength • Very good elastic, mechanical properties • Very high abrasion resistance • High cohesive friction • Good resistance to acids and alkalis

Technical specification

• Material: NR (natural rubber) • Colour: red • Shore hardness A: 50° ±5° (DIN 53505) • Temperature range: -40 to +80 °C • Regulations: conforming to FDA and BfR ​

Semi-Finished Products Item ​ 13199 13200 13201 13202 13203 13204 13205 13206 13207 13208 13209 13210 13211 13212 13213 13214 13215 13216 13217 13218 13219 13220

Cords (0.8 - 30 mm)

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

3 3 4 4 5 5 6 6 7 7 8 8 10 10 12 12 14 14 15 15 20 20

±0.40 ±0.40 ±0.40 ±0.40 ±0.50 ±0.50 ±0.50 ±0.50 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.70 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±0.80 ±1.00 ±1.00

9 9 16 16 25 25 34 34 46 46 61 61 96 96 138 138 188 188 216 216 383 383

5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5 3 5 3 5 1 3

75.00 151.00 80.00 138.00 87.00 156.00 100.00 187.00 120.00 223.00 131.00 238.00 97.00 151.00 108.00 161.00 126.00 197.00 141.00 217.00 72.00 187.00

Item ​ 331227 331228 331229 331230 331231 331232 331233 331234 331235 331236 331237 331238 331239 331240 331241 331242 331243 331244 331245 331246 331247 331248 331249 331250 331251 331252 331253 331254 331255 331256

THOMAPLAST®-High-Tech Round Cord made of Silicone Product specification

• Extremely wide temperature range • Excellent resistance to heat and cold • Excellent resistance to hot air • Very good resistance to aging, weather, and ozone • Very good dielectrical properties • Good elastic behavior • Antiadhesive (repellent) surface • Good chemical resistance to many synthetic, animal, and vegetable oils, glycols, flame-resistant hydraulic fluids, and certain solvents.

• Poor chemical resistance to mineral oils, solvents, acids, and alkalis (individual testing required).

Technical specification

• Material: silicone (silicone rubber) • Colour: reddish brown • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +220 °C, for a short time +250 °C • Tolerance: DIN ISO 3302-1 E2 ​

Outside Ø mm

Unit m

Price EURO

2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 20 20

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

46.00 74.00 50.00 80.00 52.00 94.00 56.00 98.00 58.00 104.00 66.00 122.00 72.00 126.00 74.00 136.00 88.00 156.00 100.00 182.00 112.00 204.00 124.00 230.00 138.00 258.00 156.00 286.00 272.00 466.00

THOMAPLAST®-High-Med Round Cord made of Silicone - Pharmaceutical Product specification

• Best cold resistance • Excellent resistance to heat and hot air • Very good resistance to aging, weather, and ozone • Very good dielectrical properties • Very good physiological properties • Good elastic behavior • Antiadhesive (repellent) surface • High permeability to gases • Good chemical resistance to synthetic, animal, and vegetable oils, glycols, flame-resistant hydraulic fluids, certain solvents • Low chemical resistance to mineral oils, solvents, acids, and alkalis (to be tested in each particular case)

Technical specification

• Material: silicone (silicone rubber) • Colour: translucent • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -60 to +200 °C, for a short time +230 °C • Tolerance: DIN ISO 3302-1 E2 • Regulations: according to DAB X, BfR XV and FDA §177.2600 ​

THOMAPLAST® II - 2015 101

Semi-Finished Products

Cords (0.8 - 30 mm) Item ​ 13483 13484 13485 13486

Outside Ø mm

Unit m

Price EURO

24 24 25 25

1 3 1 3

87.00 223.00 95.00 254.00

THOMAPLAST®-High-Therm-Round Cord made of Silicone - High-Temperature Item ​ 13437 13438 13439 13440 13441 13442 13443 13444 13445 13446 13447 13448 13449 13450 13451 13452 13453 13454 13455 13456 13457 13458 13459 13460 13461 13462 13463 13464 13465 13466 13467 13468 13469 13470 13471 13472 13473 13474 13475 13476 13477 13478 13479 13480 13481 13482

Outside Ø mm

Unit m

Price EURO

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5 3 5 3 5 3 5 3 5 1 3 1 3

54.00 90.00 57.00 92.00 59.00 95.00 62.00 110.00 64.00 116.00 67.00 121.00 75.00 136.00 80.00 141.00 82.00 151.00 98.00 174.00 110.00 202.00 121.00 220.00 136.00 251.00 151.00 279.00 169.00 310.00 113.00 172.00 123.00 187.00 136.00 210.00 146.00 223.00 162.00 243.00 177.00 269.00 75.00 187.00 82.00 205.00

102 THOMAPLAST® II - 2015

Product specification

• Superelastic special silicone compound • Mechanical properties do not change even at highest temperature load • High-temperature silicone is extruded from particularly high-grade silicone elastomer and vulcanized • Vulcanized products do not contain any extractable components and are completely tasteless and odorless • Excellent thermal and heat resistance • Best cold resistance • Very good resistance to weather, aging, and ozone • Very good dielectrical properties • Antiadhesive (repellent) surface • Low chemical resistance to mineral oils, solvents, acids, and alkalis (to be tested in each particular case).

Technical specification

• Material: silicone (silicone rubber) • Colour: grey • Shore hardness A: 58° ±5° (DIN 53505) • Density: 1.15 ±0.03 g/cm3 (DIN 53479) • Temperature range: -50 to +250 °C, for a short time +300 °C • Tearing strength: >6 MPa • Elongation at break: 250 % • Tolerance: DIN ISO 3302-1 E2 • Regulations: conforming to FDA ​

Item ​ 191261 191271 191281 191291 191301 191311 191321 191331 191341 191351 191381 191391

Outside Ø mm

Unit m

Price EURO

2 2 3 3 4 4 5 5 6 6 8 8

5 10 5 10 5 10 5 10 5 10 5 10

29.00 53.00 47.00 83.00 57.00 101.00 64.00 118.00 73.00 126.00 100.00 159.00

Semi-Finished Products Item ​

Cords (0.8 - 30 mm)

Outside Ø mm

Unit m

Price EURO

10 10 12 12 14 14 16 16 20 20

5 10 5 10 5 10 5 10 5 10

150.00 202.00 156.00 228.00 183.00 243.00 221.00 294.00 345.00 458.00

191401 191411 191421 191431 191441 191451 191461 191471 191481 191491

Item ​ 339473 339474 339475 339476 339477 339478 339479 339480 339481 339482 339483 339484 339485 339486 339487 339488 339489 339490 339491 339492 339493 339494 339495 339496 339497 339498 339499

THOMAPLAST®-High-Flexible Round Cord made of TPE - Food Application area

• Sealing technology, engineering operations and maintenance, plant construction, container construction in pharmaceutical engineering and food processing technology

Product specification

• Suitable for food • Very good elastic properties • Good cold and thermal resistance • Excellent resistance to weather and aging • Good mechanical loadability

Technical specification

• Material: TPE-S (thermoplastic elastomer) • Compound: SEBS (styrene block copolymer) • Colour: light beige • Shore hardness A: 45° ±5° • Temperature range: -50 to +95 °C; for a short time +150 °C (at damp heat) • Elongation at break: 350 % • Tolerance: DIN ISO 3302-1 E2 • Regulations: BfR; conforming to FDA

Outside Ø mm

Unit m

Price EURO

4 5 5 5.33 5.33 6 6 7 7 8 8 9 9 10 10 11 11 12 12 14 14 16 16 18 18 20 20

10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

98.00 66.00 108.00 70.00 118.00 78.00 132.00 84.00 140.00 96.00 160.00 102.00 170.00 114.00 190.00 120.00 216.00 142.00 226.00 168.00 252.00 212.00 318.00 238.00 348.00 280.00 408.00

THOMAPLAST®-High-Tech Round Cord made of PTFE Product specification

• Made of PTFE, for versatile use in all laboratories for tieing and dipping of devices in aggressive media.

Technical specification

​

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Temperature range: -240 to +260 °C, for a short time +280 °C • Design: unsintered, oil free and coiled ​

Item ​ 339464 339465 339466 339467 339468 339469 339470 339471 339472

Outside Ø mm

Unit m

Price EURO

2 2 2.5 2.5 3 3 3.5 3.5 4

5 10 5 10 5 10 5 10 5

46.00 78.00 46.00 78.00 48.00 82.00 52.00 88.00 58.00

Item ​ 60280 60281 60282 60283 301195

Outside Ø mm

Length m

Unit piece

Price EURO

0.8 1.2 1.6 2 2.4

60 30 30 15 15.25

1 1 1 1 1

102.00 102.00 151.00 98.00 105.00

THOMAPLAST® II - 2015 103

Semi-Finished Products Item ​

Cords (0.8 - 30 mm)

Outside Ø mm

Length m

Unit piece

Price EURO

3 4 7.2

15 10.7 2.6

1 1 1

156.00 121.00 95.00

60285 301196 301197

Item ​ 13678 13679 13680 13681 13682 13683 13684

THOMAPLAST®-Foam Rubber Round Cord made of CR Product specification

• Good abrasion resistance, good elastic behavior • Good resistance to aging, weather, and ozone • High flame-resistance • Good chemical resistance to dilute acids and alkalis as well as mineral oils

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

15 18 18 25 25 30 30

±1.3 ±1.6 ±1.6 ±1.6 ±1.6 ±2.0 ±2.0

115 165 165 319 319 503 503

10 3 5 1 3 1 3

220.00 108.00 164.00 64.00 156.00 87.00 220.00

THOMAPLAST®-Foam Rubber Round Cord made of EPDM Product specification

Technical specification

• High tearing strength • Very good resistance to weather • Outstanding elastic behaviour • Good resistance to aging, good chemical resistance to acids and alkalis

• Material: CR (chloroprene rubber) • Colour: grey (similar to RAL 7001) • Shore hardness A: 15° ±5° (DIN 53505) • Temperature range: -25 to +80 °C • Density: approx. 0.50 g/cm3 • Tolerance: DIN ISO 3302-1 E3 • Design: foamed, all over with closed skin, open cured

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber) • Colour: black • Shore hardness A: 20° ±5° (DIN 53505) • Temperature range: -40 to +125 °C • Density: 0.60 ±0.10 g/cm3 • Tolerance: DIN ISO 3302-1 E3 • Design: foamed, with closed skin

​

​

Item ​ 13655 13656 13657 13658 13659 13660 13661 13662 13663 13664 13665 13666 13667 13668 13669 13670 13671 13672 13673 13674 13675 13676 13677

Outside Ø mm

Tolerance mm

Weight g/m

Unit m

Price EURO

2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 12 12 13 13 15

±0.5 ±0.5 ±0.7 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.3 ±1.3 ±1.3 ±1.3 ±1.3

2 2 3 3 8 8 13 13 18 18 25 25 33 33 41 41 51 51 74 74 86 86 115

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

34.00 57.00 36.00 62.00 39.00 52.00 41.00 69.00 54.00 95.00 69.00 121.00 75.00 128.00 80.00 144.00 85.00 156.00 90.00 162.00 100.00 182.00 121.00

104 THOMAPLAST® II - 2015

Item ​ 339953 339954 339955 339956 339957 339958 339959 339960 339961 339962 339963 339964 339965 339966 339967 339968 339969 339970 339971

Outside Ø mm

Weight g/m

Unit m

Price EURO

2 2 3 3 4 4 5 5 6 6 7 7 8 8 10 10 12 12 15

2 2 3 3 8 8 13 13 18 18 25 25 33 33 51 51 74 74 115

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

35.00 59.00 41.00 69.00 42.00 70.00 49.00 83.00 55.00 93.00 64.00 105.00 75.00 120.00 114.00 182.00 124.00 198.00 139.00

Semi-Finished Products Item ​ 339972 339973 339974 339975 339976 339977 339978

Cords (0.8 - 30 mm)

Outside Ø mm

Weight g/m

Unit m

Price EURO

15 20 20 25 25 30 30

115 210 210 319 319 459 459

10 3 5 3 5 3 5

230.00 81.00 108.00 89.00 115.00 95.00 131.00

Item ​

Product specification

• Flexible foam rubber with a fluorine content ≥66 % • Abrasion-resistant outer skin • Extremely high flexibility and permanent elasticity, also after hot/cold cycles • Outstanding sealing force even at lowest surface pressure • Highest life cycle also at highest compressive set • Gastight sealing even at lowest surface pressure • Excellent deformation bridging • Good recovery • Very good resistance to ozone, oxygen, weather, and aging • Good flame resistance, self-extinguishing • Excellent resistance to mineral oils, fats, fuels, hydrocarbons, chlorinated solvents • Resistant to water, steam, alcohols even at high temperatures • Material: FPM (fluorinated rubber), foamed • Colour: black • Shore hardness A: 30° • Density: 0.8 - 0.9 g/cm3 (DIN 53479A) • Elongation at break: 300 % (DIN 53571) • Compression set: 25 % at +70 °C / 24 h (VPA2) • Temperature range: -20 to +215 °C, for a short time up to +280 °C • Tolerance: DIN ISO 3302-1 E3

Unit m

Price EURO

8 8 9 9 10 10 10 10 11 11 12 12 12 15 15 18 18 20 20 22 22 25 25 30 30

5 10 1 3 1 3 5 10 1 3 1 3 5 1 3 1 3 1 3 1 3 1 3 1 3

260.00 462.00 79.00 189.00 96.00 261.00 396.00 692.00 99.00 269.00 106.00 268.00 358.00 112.00 277.00 163.00 389.00 238.00 592.00 264.00 648.00 312.00 744.00 412.00 886.00

340638 340639 28862 28863 28864 28865 340640 340641 28866 28867 28868 340642 340643 340644 340645 340646 340647 340648 340649 340650 340651 340652 340653 340654 340655

THOMAPLAST®-High-Chem Foam Rubber Round Cord made of FPM

Technical specification

Outside Ø mm

THOMAPLAST®-High-Tech Foam Rubber Round Cord made of TPE - conforming to FDA Application area

• Seal technics, containers for food and pharmaceutical products ​

​

Item ​ 340628 340629 28851 28852 340630 340631 28853 28854 340632 340633 28855 28856 340634 340635 28857 28859 340636 340637 28860 28861

Outside Ø mm

Unit m

Price EURO

3 3 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7 7 8 8

5 10 1 3 5 10 1 3 5 10 1 3 5 10 1 3 5 10 1 3

52.00 92.00 19.00 51.00 76.00 132.00 24.00 65.00 98.00 176.00 35.00 93.00 142.00 248.00 48.00 129.00 194.00 304.00 64.00 172.00

Product specification

• Suitable for food • Very good elastic properties • Good cold and thermal resistance • Excellent resistance to weather and aging • Good mechanical loadability

Technical specification

• Material: TPE-S (thermoplastic elastomer) • Compound: SEBS (styrene block copolymer) • Colour: white • Shore hardness A: 25° ±5° • Temperature range: -50 to +95 °C • Density: 0.50 ±0.10 g/cm3 • Tolerance: DIN ISO 3302-1 E2 • Regulations: conforming to FDA

THOMAPLAST® II - 2015 105

Semi-Finished Products Item ​ 340437 340438 340439 340440 340441 340442 340443 340444 340445 340446 340447 340448 340449 340450

Cords (0.8 - 30 mm)

Outside Ø mm

Unit m

Price EURO

3 3 4 4 5 5 6 6 7 7 8 8 10 10

5 10 5 10 5 10 5 10 5 10 5 10 5 10

53.00 84.00 55.00 88.00 60.00 96.00 70.00 112.00 75.00 120.00 85.00 136.00 98.00 145.00

THOMAPLAST®-High-Tech Foam Rubber Round Cord made of Silicone

Item ​

Outside Ø mm

Unit m

Price EURO

6 8 8 10 10 12 12 14 14 15 15 20 20 25 25

10 5 10 5 10 5 10 5 10 5 10 5 10 3 5

70.00 50.00 88.00 68.00 120.00 84.00 146.00 102.00 178.00 118.00 204.00 176.00 352.00 194.00 332.00

340513 340514 340515 340516 340517 340518 340519 340520 340521 340522 340523 340524 340525 340526 340527

THOMAPLAST®-High-Therm-Glass Fibre Fabric Cord - asbestos-free

Product specification

Application area

• Very good elastic behavior • Excellent heat resistance • Outstanding resistance to cold • Very good elongation at break and elastic force • Very good resistance to ozone, aging, and weather • Very good dielectrical (non-conducting) properties • Antiadhesive surface

• Thermal insulating

Product specification

• Highest heat resistance • High heat stability • Very high mechanical stability • Non-combustible • Very good chemical resistance to oils, fats, alkalis, organic acids and vapors • Best suited for thermal insulation • Ø 3-6 mm twined, Ø 8-10 mm left/right twisted and additionally knitted around.

Technical specification

• Material: silicone (silicone rubber) • Colour: white • Shore hardness A: 15° ±5° • Temperature range: -50 to +200 °C • Density: approx. 0.25 g/cm3 (DIN 53505) • Tearing strength: >500 kPa • Elongation at break: >200 % • Thermal conductivity: 0.07 W/mk (±25 %) at +125 °C • Dielectric strength: 23 kV/mm (±25 %) • Design: all over with skin, fine-pored closed cells

Technical specification

• Material: glass fibre, made of EC 9 filament yarn, textured • Special features: asbestos-free • Temperature range: -10 to +450 °C, for a short time +550 °C ​

​

Item ​ 340506 340507 340508 340509 340510 340511 340512

Outside Ø mm

Unit m

Price EURO

3 3 4 4 5 5 6

5 10 5 10 5 10 5

26.00 46.00 30.00 52.00 34.00 60.00 40.00

106 THOMAPLAST® II - 2015

Item ​ 302269 302270 302271 302272 302273 302274 302277 302278

Outside Ø mm

Unit m

Price EURO

3 3 5 5 6 6 8 8

2 5 2 5 2 5 2 5

44.00 80.00 47.00 87.00 48.00 88.00 54.00 98.00

Semi-Finished Products Item ​

Cords (0.8 - 30 mm)

Outside Ø mm

Unit m

Price EURO

10 10

2 5

82.00 120.00

302281 302282

THOMAPLAST®-High-Therm-Ceramic Fabric Cord asbestos-free Product specification

• Highest heat resistance • Absolutely highest heat stability • Non-combustible • Very high mechanical stability • Good chemical resistance, very high to oils, fats, all chemicals, steam and water as well as liquid metals (aluminum, zinc etc.), not suitable for hydrofluoric acid, phosphoric acid, and some strong alkalis.

Item ​ 12022 12023 12024

Outside Ø mm

Unit m

Price EURO

2.4 2.4 2.4

5 10 15

87.00 144.00 174.00

Technical specification

• Material: ceramic composition reinforced with chromium steel wire • Special features: round and twisted, asbestos-free • Temperature range: -10 to +1,100 °C

Profiles Elastomers

​

THOMAPLAST®-Profiles made of CR General product specification

Item ​ 302331 302332 302333 302334 302335 302336 302337 302338 302339 302340 302341 302342 302343 302344 302345 302346 302347 302348

Outside Ø mm

Weight g/m

Unit m

Price EURO

3 3 4 4 5 5 6 6 8 8 10 10 12 12 15 15 20 20

5 5 8 8 13 13 16 16 25 25 39 39 57 57 96 96 172 172

2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5

49.00 89.00 50.00 94.00 53.00 99.00 54.00 101.00 58.00 109.00 65.00 122.00 78.00 145.00 101.00 188.00 152.00 289.00

• Good elastic behavior • Good abrasion resistance • Good resistance to aging, weather, and ozone • High flame-resistance • Good resistance to diluted acids and alkalis, limited resistance to mineral oils (swelling) • Poor resistance to solvents and steam • Chemical features: CR is a all-round synthetic rubber basing on polychloroprene.

Chloroprene rubber is vulcanized in different systems influencing parameters such as compressibility, oil resistance, weather resistance, and tendency to crystallization.

Use in contact with mineral oils possible, although swelling is stronger compared to NBR, depending on the respective compound specification. ​

THOMAPLAST®-Rectangular Profile made of CR Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -20 to +90 °C • Tolerance: DIN ISO 3302-1 E2 ​

THOMAPLAST®-Cable made of Stainless Steel FEP-Coated Product specification

• Stranded cable made of stainless steel, seamlessly coated with translucent, white FEP. ​

THOMAPLAST® II - 2015 107

Semi-Finished Products - Elastomers Item ​ 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541 13542 13543 13544 13545 13546 13547 13548 13549 13550 13551 13552 13553 13554 13555 13556 13557 13558 13559 13560 13561 13562 13563 13564 13565 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581

Profiles

A mm

B mm

Weight g/m

Unit m

Price EURO

3 3 5 5 6 6 8 8 10 10 12 12 14 14 16 16 20 20 10 10 15 15 20 20 30 30 10 10 15 15 20 20 25 25 30 30 40 40 15 15 20 20 25 25 10 10 20 20 30 30 40 40 10 10 15 15

3 3 5 5 6 6 8 8 10 10 12 12 14 14 16 16 20 20 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5

12 12 33 33 47 47 84 84 130 130 188 188 260 260 295 295 525 525 13 13 20 20 26 26 39 39 26 26 39 39 52 52 65 65 78 78 105 105 59 59 78 78 98 98 52 52 105 105 160 160 210 210 65 65 98 98

5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5 3 5 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5 5 10 5 10

69.00 121.00 80.00 136.00 85.00 156.00 139.00 254.00 131.00 238.00 136.00 243.00 108.00 162.00 116.00 177.00 133.00 202.00 49.00 87.00 52.00 92.00 54.00 100.00 72.00 136.00 80.00 144.00 87.00 161.00 95.00 172.00 108.00 194.00 110.00 200.00 113.00 205.00 100.00 182.00 115.00 207.00 126.00 233.00 80.00 146.00 133.00 240.00 138.00 253.00 105.00 166.00 113.00 208.00 118.00 215.00

108 THOMAPLAST® II - 2015

Item ​ 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597 13598 13599 13600 13601 13602 13603 13604 13605 13606 13607 13608 13609 13610 13611 13612 13613 13614 13615 13616 13617 13618 13619

A mm

B mm

Weight g/m

Unit m

Price EURO

20 20 25 25 30 30 40 40 50 50 60 60 30 30 40 40 10 10 40 40 15 15 20 20 30 30 40 40 30 30 40 40 20 20 30 30 30 30

5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 8 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 15 15 15 15 20 20

130 130 165 165 195 195 260 260 325 325 390 390 240 240 315 315 105 105 416 416 195 195 260 260 390 390 520 520 470 470 625 625 390 390 590 590 780 780

5 10 5 10 5 10 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 1 3

136.00 251.00 141.00 261.00 143.00 263.00 97.00 161.00 105.00 159.00 108.00 161.00 136.00 210.00 177.00 271.00 90.00 138.00 100.00 156.00 90.00 138.00 100.00 156.00 115.00 174.00 146.00 225.00 115.00 174.00 166.00 253.00 105.00 159.00 151.00 233.00 75.00 146.00

THOMAPLAST®-Rectangular Profile made of CR with round shoulder Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -25 to +90 °C • Density: 1.42 g/cm3 • Tearing strength: 8.5 MPa • Elongation at break: 450 % • Compression set: 25 % at +70 °C / 22 h • Volume resistivity: 3 x 1010 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 • Design: with round shoulder (on one side) ​

Semi-Finished Products - Elastomers

Profiles • Tearing strength: 8.5 Mpa • Elongation at break: 450 % • Compression set: 25 % at +70 °C / 22 h • Volume resistivity: 3 x 1010 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 • Design: L-shaped (scalene) ​

Item ​ 331355 331356 331357 331358 331359 331360 331361 331362

A mm

B mm

Weight g/m

Unit m

Price EURO

30 30 40 40 50 50 60 60

3 3 3 3 3 3 3 3

120 120 155 155 195 195 235 235

5 10 3 5 3 5 3 5

128.00 242.00 110.00 172.00 110.00 172.00 124.00 192.00

Item ​ 331365 331366 331367 331368 331369 331370 331371 331372 331373 3313741

THOMAPLAST®-Triangular Profile made of CR Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -25 to +90 °C • Density: 1.42 g/cm3 • Tearing strength: 8.5 MPa • Elongation at break: 450 % • Compression set: 25 % at +70 °C / 22 h • Volume resistivity: 3 x 1010 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 • Design: triangular shape (scalene)

1

A mm

B mm

A mm

Unit m

Price EURO

10 10 15 15 20 20 30 30 50 50

6 6 10 10 15 15 20 20 50 50

1.5 1.5 2 2 3 3 5 5 5 5

5 10 5 10 3 5 3 5 3 5

98.00 180.00 98.00 180.00 104.00 156.00 116.00 172.00 202.00 292.00

V-shaped delivery

THOMAPLAST®-U-Profile made of CR with angled shoulder Technical specification

​

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -25 to +90 °C • Density: 1.42 g/cm3 • Tearing strength: 8.5 MPa • Elongation at break: 450 % • Compression set: 25 % at +70 °C / 22 h • Volume resistivity: 3 x 1010 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 • Design: U-profile with angled shoulder ​

Item ​ 331363 331364

A mm

B mm

Weight g/m

Unit m

Price EURO

10 10

5 5

33 33

5 10

106.00 188.00

THOMAPLAST®-L-Profile made of CR Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -25 to +90 °C • Density: 1.42 g/cm3

THOMAPLAST® II - 2015 109

Semi-Finished Products - Elastomers

Profiles

Item ​

A mm

B mm

C mm

Unit m

Price EURO

331389 331390 331391 331392 331393 331394 331395 331396 331397 331398 331399 331400 331401 331402

8 8 6.35 6.35 8 8 11 11 9 9 13 13 15 15

13 13 8 8 10 10 15 15 18 18 22 22 25 25

2 2 1.1 1.1 1.5 1.5 2.5 2.5 1.5 1.5 2.5 2.5 2.5 2.5

5 10 3 5 5 10 3 5 5 10 3 5 3 5

124.00 228.00 128.00 198.00 116.00 210.00 102.00 160.00 124.00 228.00 104.00 162.00 116.00 180.00

THOMAPLAST®-U-Profile made of CR with round shoulder Technical specification

Item ​ 331416 331417 331418

A mm

B mm

C mm

Unit m

Price EURO

7 10 10

20 25 25

1 2.5 2.5

10 3 5

218.00 110.00 172.00

THOMAPLAST®-Profiles made of EPDM General product specification

• Very good resistance to weather and aging • Good cold and thermal resistance • Excellent elastic behaviour • Outstanding elongation at break and tearing strength • Very good resistance to acids and alkalis • Good resistance to hot water, hot steam, glycols, brake fluids, and polar solutions • Poor resistance to mineral oils and fuels • Chemical features: EPDM is a sulfur vulcanized synthetic rubber containing diene components. The terpolymer EPDM is of outstanding stability to oxygen and ozone. Its chemical properties cause its excellent resistance to light, aging, and weather. ​

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -25 to +90 °C • Density: 1.42 g/cm3 • Tearing strength: 8.5 MPa • Elongation at break: 450 % • Compression set: 25 % at +70 °C / 22 h • Volume resistivity: 3 x 1010 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 • Design: U-profile with round shoulder

THOMAPLAST®-U-Profile made of EPDM with round shoulder Technical specification

• Material: EPDM (ethylene-propylene-diene rubber or terpolymer rubber) • Colour: black • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -25 to +100 °C • Density: 1.14 g/cm3 • Elongation at break: 280 % • Tearing strength: 11 MPa • Compression set: 11 % at +100 °C / 70 h • Volume resistivity: <106 Ohm x cm • Design: U-profile with round shoulder

​

​

Item ​

A mm

B mm

C mm

Unit m

Price EURO

331403 331404 331405 331406 331407 331408 331409 331410 331411 331412 331413 331414 331415

3 3 5 5 6 6 4 4 5.5 5.5 6 6 7

15 15 10 10 12 12 24 24 18 18 19 19 20

1 1 1.5 1.5 2 2 1 1 1.25 1.25 1.5 1.5 1

5 10 5 10 5 10 5 10 5 10 5 10 5

106.00 196.00 106.00 196.00 106.00 196.00 126.00 234.00 124.00 230.00 124.00 230.00 116.00

110 THOMAPLAST® II - 2015

Item ​ 331454 331455 331456 331457 331458 331459 331460 331461 331462 331463

A mm

B mm

C mm

Unit m

Price EURO

3 3 5 5 6 6 4 4 6 6

10 10 15 15 15 15 21 21 24 24

1 1 1.75 1.75 2 2 1 1 2 2

5 10 5 10 5 10 5 10 5 10

80.00 142.00 104.00 178.00 110.00 186.00 104.00 178.00 122.00 208.00

Semi-Finished Products - Elastomers Item ​ 331464 331465 331466 331467 331468 331469 331470 331471

Profiles

A mm

B mm

C mm

Unit m

Price EURO

7 7 7 7 8 8 9 9

19 19 20 20 20 20 20 20

2 2 1.5 1.5 2 2 2 2

5 10 5 10 5 10 5 10

130.00 222.00 122.00 214.00 124.00 218.00 130.00 226.00

THOMAPLAST®-High-Chem Rectangular Profile made of EPDM/PP Product specification

• Extremely elastic thermoplastic elastomer • Very high resistance to many alkalis, acids, oxidants, and polar solvents, except to mineral oils, fuels and hydraulic fluids.

• Very good resistance to aging, ozone, UV-radiation and weather.

• Resistant to hot water and antifreeze agents.

• Suitable for joining with adhesives and heat-sealing.

• Mechanically highly loadable and very good abrasion resistance.

• The material is recyclable.

Technical specification

THOMAPLAST®-U-Profile made of EPDM with angled shoulder

• Material: EPDM/PP (thermoplastic elastomer); compound of EPDM and PP, as well as stabilizing additives; EPDM (ethylene-propylene-diene rubber); PP (polypropylene) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -45 to +130 °C, for a short time +150 °C • Compressibility: 24 % at +23 °C / 22 h • Tearing strength: 70 kg/cm2 • Elongation at break: 375 % • Tolerance: DIN ISO 3302-1 E2

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber or terpolymer rubber) • Colour: black • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -25 to +100 °C • Density: 1.14 g/cm3 • Elongation at break: 280 % • Tearing strength: 11 MPa • Compression set: 11 % at +100 °C / 70 h • Volume resistivity: <106 Ohm x cm • Design: U-profiles with angled shoulder

​

​

Item ​

Item ​ 331438 331439 331440 331441 331442 331443 331444 331445 331446 331447 331448 331449 331450 331451 331452 331453

A mm

B mm

C mm

Unit m

Price EURO

6 6 5 5 10 10 10 10 12 12 16 16 25 25 30 30

10 10 15 15 20 20 10 10 15 15 16 16 25 25 30 30

1.5 1.5 1 1 3 3 2 2 3 3 4 4 5 5 5 5

5 10 5 10 3 5 3 5 3 5 3 5 3 5 3 5

104.00 184.00 110.00 192.00 98.00 142.00 90.00 130.00 96.00 138.00 108.00 160.00 138.00 196.00 146.00 208.00

339448 339449 339450 339451 339452 339453 339454 339455 339456 339457 339458 339459 339460 339461 339462 339463 340931 340932 340933 340934 340935 340936 340937

A mm

B mm

Unit m

Price EURO

4 4 5 5 6 6 8 8 10 10 12 12 14 14 15 15 16 16 18 18 20 20 25

4 4 5 5 6 6 8 8 10 10 12 12 14 14 15 15 16 16 18 18 20 20 25

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

75.00 135.00 80.00 144.00 90.00 162.00 100.00 176.00 120.00 210.00 160.00 280.00 192.00 330.00 210.00 360.00 228.00 372.00 236.00 388.00 286.00 444.00 302.00

THOMAPLAST® II - 2015 111

Semi-Finished Products - Elastomers Item ​ 340938 340939 340940

Profiles

A mm

B mm

Unit m

Price EURO

25 30 30

25 30 30

10 5 10

408.00 462.00 616.00

THOMAPLAST®-Rectangular Profile made of FPM

Item ​

A mm

B mm

Unit m

Price EURO

14 14 16 16 16

14 14 16 16 16

3 5 1 3 5

550.00 714.00 294.00 724.00 939.00

19305 19306 19307 19308 19309 1

Application area

one meter pieces

• Sealing technology, chemical plant building, laboratory technology, machine engineering and apparatus construction, for gas and oil pipelines

THOMAPLAST®-Rectangular Profile made of NBR

Product specification

• Sealing technology, chemical technology, petrochemistry, machine engineering and apparatus construction

• Outstanding chemical resistance, especially to mineral, vegetable, and animal oils, hydraulic fluids, amines, fuels, oxidants, many acids and alkalis, as well as aliphatic, aromatic and halogenated hydrocarbons.

• Limited resistance to polar solvents (swelling) • Very good resistance to ozone, oxygen, aging and weather • Outstanding temperature resistance

Technical specification

• Material: FPM (fluorinated rubber) • Material quality: 100 % fluoroelastomer • Colour: black • Shore hardness A: 75° ±5° (DIN 53505) • Temperature range: -25 to +250 °C, for a short time +300 °C • Tolerance: DIN ISO 3302-1 E2

Application area

Product specification

• Good abrasion resistance • Optimal thermal resistance • Resistant to mineral oil, vegetable oils, greases, fuels, alcohols, glycols and aliphatic solvents, as well as dilute acids and alkalis at room temperature.

Technical specification

• Material: NBR (butadiene-acrylonitrile rubber) • Colour: black • Shore hardness A: 65° ±5° • Temperature range: -10 to +100 °C, for a short time +120 °C • Tolerance: DIN ISO 3302-1 E2

​

​

Item ​ 13626 136271 136281 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304

A mm

B mm

Unit m

Price EURO

3 3 3 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 14

3 3 3 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 14

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1

115.00 315.00 490.00 39.00 98.00 133.00 41.00 123.00 164.00 87.00 218.00 292.00 126.00 315.00 422.00 182.00 450.00 601.00 223.00

112 THOMAPLAST® II - 2015

Item ​ 340690 340691 340692 340693 340694 340695 340696 340697 340698 340699 340700 340701 340702 340703

A mm

B mm

Unit m

Price EURO

5 5 8 8 10 10 10 10 20 20 20 20 20 20

5 5 8 8 5 5 10 10 5 5 10 10 20 20

5 10 5 10 5 10 5 10 5 10 5 10 5 10

36.00 64.00 68.00 102.00 58.00 96.00 84.00 132.00 86.00 138.00 158.00 264.00 302.00 452.00

ThomaPLAST® II

To provide you with the best possible information about the application areas of our products, we take great care to give you a detailed, precise and technically up-to-date description.

However, please note, that we cannot be held liable for any errors. Any values given are recommendations only that have been tested under normal conditions.

We suggest, that you test the product under the appropriate conditions determined by your specific use of the application.

If you need any help, we will gladly share our experiences with you to give you further assistance.

Our product range is clearly classified into four product groups and presented in detail in other handbooks.

THOMAFLUID® I-V Hoses, dosing and connection technology THOMAPLAST® I-V Laboratory plastics, semi-finished products, closure and fastening elements and gaskets THOMAPOR® Separation technology THOMADRIVE® Drive technology Examples of the extremely wide range of products are employed in virtually every sector of industry.

The spectrum extends from hoses and fluids technology through elastomers and semi-finished products, plastics and bonding technology to laboratories and filtration technology.

The prices in this handbook are valid for the currency area of the „European Union“ !

No minimum order.

Subject to technical and price change. © 2015 Copyright by Reichelt Chemietechnik GmbH + Co.

Request our complete programme free of charge and without obligation or visit our homepage at www.rct-online.de

Reichelt Chemietechnik GmbH + Co.

EnglerstraĂ&#x;e 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de

Shopping per mouseclick www.rct-online.de