Thomaplast III (english) by RCT Reichelt Chemietechnik

Reichelt Chemietechnik GmbH + Co.

ThomaPLAST® III Semi-Finished Products Profiles

Adhesives and Lubricants Greases, Adhesives, Pastes, Cleaners, Etching Agents and Sprays

Fastening Elements Nuts, Finishing Washers, Screws, Grub Slotted Screws and Spacer Elements

Reichelt Chemietechnik ’15 Shopping per mouseclick www.rct-online.de

Reichelt Chemietechnik GmbH + Co.

EnglerstraĂ&#x;e 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de

Ottheinrichsbau im Heidelberger Schloss

Inhaltsübersicht nach Werkstoffen Content: Semi-Finished Products (Elastomere)

Seite page

Profiles rectangular, triangular, C, L, U; partially with round or angled shoulder • Elastomers: CR, EPDM, EPDM/PP, FPM, NBR, NR, PVC-rigid, silicone, TPE • Foam Rubbers: CR, EPDM, FPM, silicone • Plastics: glass fiber reinforced plastic • Metals: aluminium, stainless steel

Content: Adhesives and Lubricants Greases PTFE-based

3 - 11 11 - 15 15 - 16 17

page 17 - 18

Adhesives one-component, two-component for pieces of elastomers, plastics, ceramics, metals for porous glued surfaces

18 - 24

Pastes

24 - 26

heat-conductive paste, sealing paste, filling compound

Cleaners and Etching Agents

26 - 27

Sprays

27 - 28

sliding, parting, conductive, silver, leak detection, anti spatter THOMAPLAST® III - 2015

Content: Fastening Elements

page

Nuts

28 - 38

• made of PA 6.6, PA glass fibre reinforced, GFRP, PC, PVDF, PTFE, PFA, PP • nuts: hex, square, cap, insulating, star grip, wing, knurled; slotted nut plug

Metric Finishing Washers

38 - 41

• made of PA 6.6 • for countersunk head and cheese head screws

Washers and Rings

41 - 60

• made of HDPE, PA 6, PA 6.6, PP, POM, PTFE, PVC-rigid, PVC-plasticized, PVDF • washer: sealing, holding, insulating, double locking and sealing, anti-loss, locating; clip, retaining ring

Screws

60 - 101

• made of PA 6.6, PP, PVDF, PTFE, PC, HDPE • hexagon head, cheese head, pan head, mushroom head cross recessed mushroom head, round head, knurled thumb, countersunk head, connecting, wing, triangular partially with: slotted, with shank, hexagon socket, with flange

Grub Slotted Screws and Threaded Rods

101 - 106

• made of PA 6.6, GFRP, zinc-plated steel, V4A-steel, stainless steel, brass partially slotted, hexagon socket

Spacer elements • spacers made of PA 6 Further spacer elements: see handbook THOMAPLAST® IV

THOMAPLAST® III - 2015

106 - 112

Semi-Finished Products - Elastomers

Profiles Item

Semi-Finished Products - Profiles Elastomers THOMAPLAST®-Profiles made of CR General product specification

• Good elastic behavior • Good abrasion resistance • Good resistance to aging, weather, and ozone • High flame-resistance • Good resistance to diluted acids and alkalis, limited resistance to mineral oils (swelling) • Poor resistance to solvents and steam • Chemical features: CR is a all-round synthetic rubber basing on polychloroprene. Chloroprene rubber is vulcanized in different systems influencing parameters such as compressibility, oil resistance, weather resistance, and tendency to crystallization. Use in contact with mineral oils possible, although swelling is stronger compared to NBR, depending on the respective compound specification.

THOMAPLAST®-Rectangular Profile made of CR Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -20 to +90 °C • Tolerance: DIN ISO 3302-1 E2

Item 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541

A mm

B mm

Weight g/m

Unit m

Price EURO

3 3 5 5 6 6 8 8 10 10 12 12 14 14 16 16

12 12 33 33 47 47 84 84 130 130 188 188 260 260 295 295

5 10 5 10 5 10 5 10 5 10 5 10 3 5 3 5

69.00 121.00 80.00 136.00 85.00 156.00 139.00 254.00 131.00 238.00 136.00 243.00 108.00 162.00 116.00 177.00

13542 13543 13544 13545 13546 13547 13548 13549 13550 13551 13552 13553 13554 13555 13556 13557 13558 13559 13560 13561 13562 13563 13564 13565 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597

A mm

B mm

Weight g/m

Unit m

Price EURO

20 20 10 10 15 15 20 20 30 30 10 10 15 15 20 20 25 25 30 30 40 40 15 15 20 20 25 25 10 10 20 20 30 30 40 40 10 10 15 15 20 20 25 25 30 30 40 40 50 50 60 60 30 30 40 40

20 20 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6

525 525 13 13 20 20 26 26 39 39 26 26 39 39 52 52 65 65 78 78 105 105 59 59 78 78 98 98 52 52 105 105 160 160 210 210 65 65 98 98 130 130 165 165 195 195 260 260 325 325 390 390 240 240 315 315

3 5 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5 5 10 5 10 5 10 5 10 5 10 3 5 3 5 3 5 3 5 3 5

133.00 202.00 49.00 87.00 52.00 92.00 54.00 100.00 72.00 136.00 80.00 144.00 87.00 161.00 95.00 172.00 108.00 194.00 110.00 200.00 113.00 205.00 100.00 182.00 115.00 207.00 126.00 233.00 80.00 146.00 133.00 240.00 138.00 253.00 105.00 166.00 113.00 208.00 118.00 215.00 136.00 251.00 141.00 261.00 143.00 263.00 97.00 161.00 105.00 159.00 108.00 161.00 136.00 210.00 177.00 271.00

THOMAPLAST® III - 2015 3

Semi-Finished Products - Elastomers Item 13598 13599 13600 13601 13602 13603 13604 13605 13606 13607 13608 13609 13610 13611 13612 13613 13614 13615 13616 13617 13618 13619

Profiles

A mm

B mm

Weight g/m

Unit m

Price EURO

10 10 40 40 15 15 20 20 30 30 40 40 30 30 40 40 20 20 30 30 30 30

8 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 15 15 15 15 20 20

105 105 416 416 195 195 260 260 390 390 520 520 470 470 625 625 390 390 590 590 780 780

3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 1 3

90.00 138.00 100.00 156.00 90.00 138.00 100.00 156.00 115.00 174.00 146.00 225.00 115.00 174.00 166.00 253.00 105.00 159.00 151.00 233.00 75.00 146.00

Item 331360 331361 331362

A mm

B mm

Weight g/m

Unit m

Price EURO

50 60 60

3 3 3

195 235 235

5 3 5

172.00 124.00 192.00

THOMAPLAST®-Triangular Profile made of CR Technical specification

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -25 to +90 °C • Density: 1.42 g/cm3 • Tearing strength: 8.5 MPa • Elongation at break: 450 % • Compression set: 25 % at +70 °C / 22 h • Volume resistivity: 3 x 1010 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 • Design: triangular shape (scalene)

THOMAPLAST®-Rectangular Profile made of CR with round shoulder Technical specification

Item 331363 331364

Unit m

Price EURO

10 10

5 5

33 33

5 10

106.00 188.00

• Material: CR (chloroprene rubber) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -25 to +90 °C • Density: 1.42 g/cm3 • Tearing strength: 8.5 Mpa • Elongation at break: 450 % • Compression set: 25 % at +70 °C / 22 h • Volume resistivity: 3 x 1010 Ohm x cm • Tolerance: DIN ISO 3302-1 E2 • Design: L-shaped (scalene)

A mm

B mm

Weight g/m

Unit m

Price EURO

30 30 40 40 50

3 3 3 3 3

120 120 155 155 195

5 10 3 5 3

128.00 242.00 110.00 172.00 110.00

4 THOMAPLAST® III - 2015

Weight g/m

Technical specification

331355 331356 331357 331358 331359

B mm

THOMAPLAST®-L-Profile made of CR

Item

A mm

Semi-Finished Products - Elastomers Item 331365 331366 331367 331368 331369 331370 331371 331372 331373 3313741 1

Profiles

A mm

B mm

A mm

Unit m

Price EURO

10 10 15 15 20 20 30 30 50 50

6 6 10 10 15 15 20 20 50 50

1.5 1.5 2 2 3 3 5 5 5 5

5 10 5 10 3 5 3 5 3 5

98.00 180.00 98.00 180.00 104.00 156.00 116.00 172.00 202.00 292.00

V-shaped delivery

THOMAPLAST®-U-Profile made of CR with round shoulder Technical specification

THOMAPLAST -U-Profile made of CR with angled shoulder ®

Technical specification

Item

A mm

B mm

C mm

Unit m

Price EURO

331403 331404 331405 331406 331407 331408 331409 331410 331411 331412 331413 331414 331415 331416 331417 331418

3 3 5 5 6 6 4 4 5.5 5.5 6 6 7 7 10 10

15 15 10 10 12 12 24 24 18 18 19 19 20 20 25 25

1 1 1.5 1.5 2 2 1 1 1.25 1.25 1.5 1.5 1 1 2.5 2.5

5 10 5 10 5 10 5 10 5 10 5 10 5 10 3 5

106.00 196.00 106.00 196.00 106.00 196.00 126.00 234.00 124.00 230.00 124.00 230.00 116.00 218.00 110.00 172.00

Item

A mm

B mm

C mm

Unit m

Price EURO

331389 331390 331391 331392 331393 331394 331395 331396 331397 331398 331399 331400 331401 331402

8 8 6.35 6.35 8 8 11 11 9 9 13 13 15 15

13 13 8 8 10 10 15 15 18 18 22 22 25 25

2 2 1.1 1.1 1.5 1.5 2.5 2.5 1.5 1.5 2.5 2.5 2.5 2.5

5 10 3 5 5 10 3 5 5 10 3 5 3 5

124.00 228.00 128.00 198.00 116.00 210.00 102.00 160.00 124.00 228.00 104.00 162.00 116.00 180.00

THOMAPLAST®-Profiles made of EPDM General product specification

• Very good resistance to weather and aging • Good cold and thermal resistance • Excellent elastic behaviour • Outstanding elongation at break and tearing strength • Very good resistance to acids and alkalis • Good resistance to hot water, hot steam, glycols, brake fluids, and polar solutions • Poor resistance to mineral oils and fuels • Chemical features: EPDM is a sulfur vulcanized synthetic rubber containing diene components. The terpolymer EPDM is of outstanding stability to oxygen and ozone. Its chemical properties cause its excellent resistance to light, aging, and weather.

THOMAPLAST® III - 2015 5

Semi-Finished Products - Elastomers

Profiles

THOMAPLAST®-U-Profile made of EPDM with round shoulder Technical specification

• Material: EPDM (ethylene-propylene-diene rubber or terpolymer rubber) • Colour: black • Shore hardness A: 60° ±5° (DIN 53505) • Temperature range: -25 to +100 °C • Density: 1.14 g/cm3 • Elongation at break: 280 % • Tearing strength: 11 MPa • Compression set: 11 % at +100 °C / 70 h • Volume resistivity: <106 Ohm x cm • Design: U-profile with round shoulder

Item 331438 331439 331440 331441 331442 331443 331444 331445 331446 331447 331448 331449 331450 331451 331452 331453

Item 331454 331455 331456 331457 331458 331459 331460 331461 331462 331463 331464 331465 331466 331467 331468 331469 331470 331471

A mm

B mm

C mm

Unit m

Price EURO

3 3 5 5 6 6 4 4 6 6 7 7 7 7 8 8 9 9

10 10 15 15 15 15 21 21 24 24 19 19 20 20 20 20 20 20

1 1 1.75 1.75 2 2 1 1 2 2 2 2 1.5 1.5 2 2 2 2

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

80.00 142.00 104.00 178.00 110.00 186.00 104.00 178.00 122.00 208.00 130.00 222.00 122.00 214.00 124.00 218.00 130.00 226.00

A mm

B mm

C mm

Unit m

Price EURO

6 6 5 5 10 10 10 10 12 12 16 16 25 25 30 30

10 10 15 15 20 20 10 10 15 15 16 16 25 25 30 30

1.5 1.5 1 1 3 3 2 2 3 3 4 4 5 5 5 5

5 10 5 10 3 5 3 5 3 5 3 5 3 5 3 5

104.00 184.00 110.00 192.00 98.00 142.00 90.00 130.00 96.00 138.00 108.00 160.00 138.00 196.00 146.00 208.00

THOMAPLAST®-High-Chem Rectangular Profile made of EPDM/PP Product specification

• Extremely elastic thermoplastic elastomer • Very high resistance to many alkalis, acids, oxidants, and polar solvents, except to mineral oils, fuels and hydraulic fluids. • Very good resistance to aging, ozone, UV-radiation and weather. • Resistant to hot water and antifreeze agents. • Suitable for joining with adhesives and heat-sealing. • Mechanically highly loadable and very good abrasion resistance. • The material is recyclable.

THOMAPLAST®-U-Profile made of EPDM with angled shoulder Technical specification

6 THOMAPLAST® III - 2015

Technical specification

• Material: EPDM/PP (thermoplastic elastomer); Compound of EPDM and PP, as well as stabilizing additives; EPDM (ethylene-propylene-diene rubber); PP (polypropylene) • Colour: black • Shore hardness A: 65° ±5° (DIN 53505) • Temperature range: -45 to +130 °C, for a short time +150 °C

Semi-Finished Products - Elastomers

Profiles

Technical specification

• Compressibility: 24 % at +23 °C / 22 h • Tearing strength: 70 kg/cm2 • Elongation at break: 375 % • Tolerance: DIN ISO 3302-1 E2 Item 339448 339449 339450 339451 339452 339453 339454 339455 339456 339457 339458 339459 339460 339461 339462 339463 340931 340932 340933 340934 340935 340936 340937 340938 340939 340940

A mm

B mm

Unit m

Price EURO

4 4 5 5 6 6 8 8 10 10 12 12 14 14 15 15 16 16 18 18 20 20 25 25 30 30

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

75.00 135.00 80.00 144.00 90.00 162.00 100.00 176.00 120.00 210.00 160.00 280.00 192.00 330.00 210.00 360.00 228.00 372.00 236.00 388.00 286.00 444.00 302.00 408.00 462.00 616.00

THOMAPLAST®-Rectangular Profile made of FPM Application area

• Sealing technology, chemical plant building, laboratory technology, machine engineering and apparatus construction, for gas and oil pipelines

Product specification

• Outstanding chemical resistance, especially to mineral, vegetable, and animal oils, hydraulic fluids, amines, fuels, oxidants, many acids and alkalis, as well as aliphatic, aromatic and halogenated hydrocarbons. • Limited resistance to polar solvents (swelling) • Very good resistance to ozone, oxygen, aging and weather • Outstanding temperature resistance

• Material: FPM (fluorinated rubber) • Material quality: 100 % fluoroelastomer • Colour: black • Shore hardness A: 75° ±5° (DIN 53505) • Temperature range: -25 to +250 °C, for a short time +300 °C • Tolerance: DIN ISO 3302-1 E2 Item 13626 136271 136281 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304 19305 19306 19307 19308 19309 1

A mm

B mm

Unit m

Price EURO

3 3 3 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16

1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5

115.00 315.00 490.00 39.00 98.00 133.00 41.00 123.00 164.00 87.00 218.00 292.00 126.00 315.00 422.00 182.00 450.00 601.00 223.00 550.00 714.00 294.00 724.00 939.00

one meter pieces

THOMAPLAST®-Rectangular Profile made of NBR Application area

• Sealing technology, chemical technology, petrochemistry, machine engineering and apparatus construction

Product specification

• Good abrasion resistance • Optimal thermal resistance • Resistant to mineral oil, vegetable oils, greases, fuels, alcohols, glycols and aliphatic solvents, as well as dilute acids and alkalis at room temperature.

THOMAPLAST® III - 2015 7

Semi-Finished Products - Elastomers

Profiles

Technical specification

Item

• Material: NBR (butadiene-acrylonitrile rubber) • Colour: black • Shore hardness A: 65° ±5° • Temperature range: -10 to +100 °C, for a short time +120 °C • Tolerance: DIN ISO 3302-1 E2 Item 340690 340691 340692 340693 340694 340695 340696 340697 340698 340699 340700 340701 340702 340703

A mm

B mm

Unit m

Price EURO

20 20

5 10

225.00 350.00

331717 331718

A mm

B mm

Unit m

Price EURO

5 5 8 8 10 10 10 10 20 20 20 20 20 20

5 5 8 8 5 5 10 10 5 5 10 10 20 20

5 10 5 10 5 10 5 10 5 10 5 10 5 10

36.00 64.00 68.00 102.00 58.00 96.00 84.00 132.00 86.00 138.00 158.00 264.00 302.00 452.00

THOMAPLAST®-Profiles made of PVC (rigid) Application area

• Laboratory technology, electroplating technology, electrical engineering, ventilation technology

General product specification • Good dielectrical properties • Hot formable • Bondable and weldable • Hardly inflammable • Good resistance to weather • Good chemical resistance

General technical specification

• Material: PVC-U, polyvinyl chloride • Design: extruded • Color: dark gray • Density: 1.42 g/cm3 • Temperature range: 0 to +60 °C, for a short time +75 °C

THOMAPLAST®-Rectangular Profile made of NR Product specification

THOMAPLAST®-L-Profile made of PVC (rigid)

• Very good elastic, mechanical properties • High tearing strength • Very high abrasion resistance • High cohesive friction • Good resistance to acids and alkalis

Technical specification

• Material: NR (natural rubber) • Colour: beige • Shore hardness A: 45° ±5° (DIN 53505) • Elongation at break: >400 % • Temperature range: -40 to +80 °C

Item 331709 331710 331711 331712 331713 331714 331715 331716

Item

A mm

B mm

Unit m

Price EURO

8 8 10 10 16 16 18 18

5 10 5 10 5 10 5 10

96.00 168.00 124.00 210.00 200.00 320.00 212.00 340.00

8 THOMAPLAST® III - 2015

302030 302031 302032 302033 302034 302035 302036 302037 302038 302039 302040 302041 302042

A mm

B mm

C mm

Length mm

Unit piece

Price EURO

15 15 25 25 35 35 35 35 38 38 50 50 50

15 15 25 25 20 20 25 25 13 13 50 50 50

3 3 3 3 2 2 3 3 3 3 5 5 5

500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 250 500 1,000

1 1 1 1 1 1 1 1 1 1 1 1 1

16.00 28.00 19.00 32.00 19.00 32.00 21.00 34.00 23.00 37.00 30.00 51.00 81.00

Semi-Finished Products - Elastomers

Profiles

THOMAPLAST®-U-Profile made of PVC (rigid)

Technical specification

• Material: silicone (silicone rubber) • Colour: transparent • Shore hardness A: 50° ±5° (DIN 53505) • Temperature range: -60 to +200 °C • Tolerance: DIN ISO 3302-1 E2

Item

Item 302043 302044 302045 302046 302047 302048 302049 302050 302051 302052 302053 302054 302055 302056 302057 302058

A mm

B mm

C mm

Length mm

Unit piece

Price EURO

10 10 15 15 18 18 25 25 27 27 30 30 35 35 50 50

10 10 15 15 17 17 13 13 22 22 30 30 20 20 25 25

1.5 1.5 2 2 2 2 2.5 2.5 2 2 2 2 2 2 2 2

500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000

2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18.00 30.00 18.00 30.00 21.00 36.00 20.00 33.00 21.00 36.00 25.00 40.00 20.00 29.00 28.00 48.00

13620 13621 13622 13623 13624 13625

A mm

B mm

Weight g/m

Unit m

Price EURO

25 25 30 30 30 30

1 1 2 2 3 3

30 30 72 72 108 108

3 5 3 5 3 5

133.00 202.00 146.00 223.00 164.00 248.00

THOMAPLAST®-Rectangular Profile made of Silicone Pharmaceutical Application area

• Sealing technology in apparatus and plant construction

Product specification

• Best cold resistance, excellent thermal and heat resistance • Very good resistance to aging, weather, and ozone • Very good physiological properties • Antiadhesive (repellent) surface • Good chemical resistance to synthetic, animal, and vegetable oils, glycols, flame-resistant hydraulic fluids, certain solvents. • Low chemical resistance to mineral oils, solvents, acids, and alkalis (to be tested in each particular case) • Conforming to FDA / BGA

Technical specification

THOMAPLAST®-Rectangular Profile made of Silicone Product specification

• Best cold resistance • Very good physiological properties • Excellent resistance to hot air and heat • Very good resistance to aging, weather, and ozone • Very good dielectrical properties • Good elastic behavior • Antiadhesive (repellent) surface • High permeability to gases • Good resistance to synthetic, animal, and vegetable oils, glycols, flame-resistant hydraulic fluids, certain solvents

• Material: silicone (silicone rubber) • Colour: translucent • Shore hardness A: 60° ±5° (DIN 53505) • Tolerance: DIN ISO 3302-1 E2 / DIN 40628 • Temperature range: -60 to +200 °C • Regulations: FDA §177.2600; conforming to BGA XV

Item 340564 340565 340566 340567 340568 340569 340570 340571

A mm

B mm

Unit m

Price EURO

5 5 7 7 8 8 8 8

5 5 7 7 6 6 8 8

5 10 5 10 5 10 5 10

52.00 92.00 80.00 138.00 80.00 138.00 96.00 162.00

THOMAPLAST® III - 2015 9

Semi-Finished Products - Elastomers Item 340572 340573 340574 340575 340576 340577

Profiles

A mm

B mm

Unit m

Price EURO

10 10 10 10 20 20

5 5 10 10 10 10

5 10 5 10 5 10

136.00 230.00 152.00 254.00 236.00 404.00

THOMAPLAST -High-Tech-Rectangular Profile made of Silicone - High-Temperature ®

Product specification

• Superelastic special silicone compound • Mechanical properties do not change even at highest temperature load • High-temperature silicone is extruded from particularly high-grade silicone elastomer and vulcanized • Vulcanized products do not contain any extractable components and are completely tasteless and odorless • Excellent thermal and heat resistance • Best cold resistance • Very good resistance to weather, aging, and ozone • Very good dielectrical properties • Antiadhesive (repellent) surface • Low chemical resistance to mineral oils, solvents, acids, and alkalis (to be tested in each particular case).

THOMAPLAST®-Rectangular Profile made of TPE Food Application area

• Sealing technology, engineering operations and maintenance, plant construction, container construction in pharmaceutical engineering and food technology

Product specification

• Suitable for food • Very good elastic properties • Good cold and thermal resistance • Excellent resistance to weather and aging • Good mechanical loadability

Technical specification

• Material: TPE-S (thermoplastic elastomer) • Compound: SEBS (styrene block copolymer) • Colour: light beige • Shore hardness A: 45° ±5° (DIN 53505) • Temperature range: -50 to +95 °C; for a short time +150 °C (at damp heat) • Elongation at break: 350 % • Tolerance: DIN ISO 3302-1 E2 • Regulations: BfR; conforming to FDA

Technical specification

• Material: silicone (silicone rubber) • Colour: grey • Shore hardness A: 55° ±5° (DIN 53505) • Density: 1.15 ±0.03 g/cm3 (DIN 53479) • Temperature range: -50 to +250 °C, for a short time +300 °C • Tearing strength: >7.5 MPa • Elongation at break: 300 % • Tolerance: DIN ISO 3302-1 E2 • Regulations: conforming to FDA and BfR

Item

Item 19152 19153 19154 19155 19156 19157 19177 19178 19179 19180

A mm

B mm

Unit m

Price EURO

8 8 10 10 12 12 16 16 20 20

5 10 5 10 5 10 3 5 3 5

62.00 110.00 95.00 169.00 121.00 195.00 156.00 213.00 238.00 328.00

10 THOMAPLAST® III - 2015

339500 339501 339502 339503 339504 339505 339506 339507 339508 339509 339510 339511 339512 339513 339514 339515 340453 340454 340455 340456 339516 339517 339518

A mm

B mm

Unit m

Price EURO

4 4 5 5 6 6 8 8 10 10 12 12 14 14 15 15 16 16 18 18 20 20 25

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

32.00 56.00 34.00 60.00 38.00 66.00 52.00 88.00 70.00 120.00 100.00 176.00 114.00 200.00 146.00 256.00 152.00 266.00 164.00 280.00 184.00 312.00 220.00

Semi-Finished Products - Foam Rubbers Item 339519 339520 339521

Profiles

A mm

B mm

Unit m

Price EURO

25 30 30

10 5 10

352.00 252.00 504.00

Item

Type

Weight g/m

Unit m

Price EURO

A A B B C C D D E E F F

78 78 80 80 82 82 260 260 140 140 121 121

3 5 3 5 3 5 1 3 1 3 1 3

108.00 156.00 104.00 150.00 92.00 130.00 66.00 164.00 52.00 136.00 52.00 136.00

331552 331553 331554 331555 331556 331557 331558 331559 331560 331561 331562 331563

Foam Rubbers THOMAPLAST®-Foam Rubber Profile made of CR Product specification

• Remarkable elasticity • Good abrasion resistance • Very good resistance to aging, weather, and ozone • High flame resistance • Chemical resistance to dilute acids and alkalis as well as mineral oils

THOMAPLAST®-Foam Rubber Rectangular Profile made of EPDM

Technical specification

Product specification

• Material: CR (chloroprene rubber) • Colour: grey • Shore hardness A: 15° ±3° (DIN 53505) • Temperature range: -35 to +70 °C • Density: approx. 0.6 g/cm3 • Tolerances: DIN ISO 3302-1 E2 • Design: foamed, with closed skin, form-vulcanized

• Very good resistance to weather • Good elastic behavior • Good resistance to heat, cold, and aging • Good chemical resistance to hot water and steam, glycol brake fluids, many acids and alkalis as well as polar solvents.

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber) • Colour: grey (similar to RAL 7035) • Shore hardness A: 15° ±3° (DIN 53505) • Temperature range: -30 to +80 °C (hot air); -30 to +100 °C (hot water/steam) • Density: approx. 0.45 g/cm3 • Tolerance: DIN ISO 3302-1 E3 • Design: foamed, all over with closed skin, open cured

Item 13685 13686 13687 13688 13689 13690 13691 13692 13693 13694 13695 13696

A mm

B mm

Weight g/m

Unit m

Price EURO

5 5 6 6 8 8 10 10 12 12 15 15

15 15 20 20 32 32 50 50 75 75 125 125

5 10 5 10 5 10 5 10 5 10 5 10

46.00 69.00 49.00 82.00 54.00 100.00 69.00 126.00 90.00 151.00 131.00 243.00

THOMAPLAST® III - 2015 11

Semi-Finished Products - Foam Rubbers Item 13697 13698 13699 13700 13701 13702 13705 13706 13707 13708 13711 13712 13713 13714 13715 13716 13717 13718 13719 13720 13721 13722 13723 13724 13725 13726 13727 13728 13729 13730 13731 13732 13733 13734 13735 13736 13737 13738 13739 13740 13741 13742 13743 13744 13745 13746 13747 13748 13749 13750 13751 13752 13753 13754 13755 13756

Profiles

A mm

B mm

Weight g/m

Unit m

Price EURO

18 18 20 20 25 25 8 8 20 20 10 10 15 15 20 20 30 30 10 10 15 15 20 20 30 30 10 10 15 15 18 18 20 20 30 30 40 40 50 50 14 14 20 20 30 30 11 11 14 14 10 10 12 12 15 15

18 18 20 20 25 25 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 7 7 7 7 8 8 8 8 8 8

195 195 240 240 435 435 9 9 20 20 17 17 27 27 30 30 55 55 20 20 30 30 44 44 60 60 30 30 40 40 46 46 51 51 77 77 110 110 130 130 44 44 62 62 95 95 45 45 55 55 40 40 48 48 65 65

3 5 3 5 3 5 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

95.00 149.00 105.00 157.00 166.00 253.00 39.00 67.00 49.00 87.00 54.00 98.00 57.00 100.00 59.00 105.00 85.00 154.00 57.00 97.00 59.00 105.00 64.00 118.00 80.00 146.00 59.00 105.00 62.00 110.00 69.00 126.00 67.00 128.00 92.00 169.00 120.00 217.00 138.00 253.00 67.00 128.00 75.00 138.00 105.00 192.00 67.00 128.00 80.00 146.00 62.00 110.00 67.00 128.00 72.00 131.00

12 THOMAPLAST® III - 2015

Item 13757 13758 13759 13760 13761 13762 13763 13764 13765 13766 13767 13768 13769 13770 13771 13772 13773 13774 13775 13776 13777 13778 13779 13780 13781 13782 13783 13784

A mm

B mm

Weight g/m

Unit m

Price EURO

20 20 28 28 38 38 20 20 30 30 40 40 16 16 25 25 20 20 22 22 25 25 30 30 40 40 40 40

8 8 8 8 8 8 10 10 10 10 10 10 12 12 12 12 15 15 15 15 15 15 20 20 20 20 25 25

85 85 120 120 170 170 110 110 165 165 220 220 110 110 195 195 165 165 182 182 210 210 330 330 430 430 600 600

5 10 5 10 5 10 5 10 3 5 3 5 3 5 3 5 3 5 3 5 3 5 1 3 1 3 1 3

105.00 192.00 141.00 253.00 146.00 271.00 118.00 215.00 95.00 146.00 100.00 151.00 92.00 141.00 95.00 146.00 97.00 149.00 95.00 146.00 97.00 149.00 59.00 151.00 72.00 182.00 95.00 238.00

THOMAPLAST®-Foam Rubber Profile made of EPDM Shore 15°

Semi-Finished Products - Foam Rubbers

Profiles

Product specification

• Outstanding elastic behaviour • Very good resistance to weather • Excellent resistance to heat, cold, hot water and steam • Good resistance to aging • Chemical resistance to glycol brake fluid, many acids and alkalis as well as polar solutions

Technical specification

• Material: EPDM (ethylene-propylene-diene rubber) • Colour: grey (similar to RAL 7035) • Shore hardness A: 15° ±3° (DIN 53505) • Temperature range: dry air, hot air: -40 to +80 °C hot water/hot steam: -40 to +100 °C • Density: approx. 0.5 g/cm3 • Tolerances: DIN ISO 3302-1 E3 • Design: foamed, with closed skin, form-vulcanized Item 331526 331527 331528 331529 331530 331531 331516 331517 331518 331519 331520 331521 331522 331523 331524 331525 331506 331507 331508 331509 331510 331511 331512 331513 331514 331515 331532 331533 331534 331535

• Material: EPDM (ethylene-propylene-diene rubber) • Colour: RAL 7001 grey • Shore hardness A: 20° ±5° (DIN 53505) • Temperature range: dry air, hot air: -30 to +80 °C hot water / hot steam: -30 to +100 °C • Density: approx. 0.6 g/cm3 • Tolerances: DIN ISO 3302-1 E3 • Design: foamed, with closed skin, form-vulcanized

Type

A mm

B mm

C mm

Weight g/m

Unit m

Price EURO

A A A A A A B B B B B B B B B B C C C C C C C C C C D D D D

25 25 16 16 14 14 14 14 14 14 13 13 13 13 14 14 4 4 6 6 12 12 10 10 10 10 28 28 30 30

8 8 10 10 8 8 15 15 18 18 20 20 26 26 30 30 10 10 12 12 16 16 25 25 17 17 10 10 14 14

2 2 3 3

100 100 90 90 56 56 116 116 140 140 143 143 186 186 240 240 19 19 37 37 110 110 138 138 94 94 75 75 126 126

3 5 3 5 5 10 3 5 3 5 3 5 3 5 3 5 5 10 5 10 3 5 3 5 3 5 3 5 3 5

90.00 128.00 90.00 128.00 96.00 164.00 88.00 126.00 104.00 148.00 104.00 148.00 108.00 162.00 136.00 196.00 64.00 112.00 68.00 118.00 82.00 118.00 98.00 138.00 102.00 146.00 82.00 116.00 98.00 136.00

THOMAPLAST®-Foam Rubber Profile made of EPDM Shore 20° Product specification

Technical specification

• Excellent elastic behavior • Very good resistance to weather • Excellent resistance to heat, cold, hot water and steam • Good resistance to aging • Chemical resistance to glycol brake fluids, many acids and alkalis as well as polar solutions

Item 331536 331537 331538 331539 331540

Type

Weight g/m

Unit m

Price EURO

A A B B C

35 35 66 66 150

5 10 3 5 3

98.00 172.00 78.00 116.00 118.00

THOMAPLAST® III - 2015 13

Semi-Finished Products - Foam Rubbers Item 331541 331542 331543 331544 331545 331546 331547 331548 331549 331550 331551

Profiles

Type

Weight g/m

Unit m

Price EURO

Item

C D D E E F F G G H H

150 110 110 76 76 107 107 115 115 210 210

5 3 5 3 5 3 5 3 5 3 5

168.00 86.00 124.00 88.00 126.00 104.00 146.00 82.00 130.00 196.00 280.00

331746 331737 331738 331739 331740 331741 331742 340376 340377 340378 331744 340380 331747 331748 340669 331752 340670 331754 340671 340672 340673 331756 340674 331758 340675 331760 340676 331762 340677 340678 340679 331764 340680 340681 340682 331209 331210 340683 340684 331211 331212 331213 331214 331215 331216 331217 331218 331219 331220

THOMAPLAST®-High-Chem Foam Rectangular Profile made of FPM Application area

• Sealing technology, chemical plant building, laboratory technology, for gas and oil pipelines

Product specification

• High-grade copolymer of fluorinated hydrocarbons • Outstanding chemical resistance, especially to mineral, vegetable, and animal oils, hydraulic fluids, amines, fuels, oxidants, many acids and alkalis, as well as aliphatic, aromatic and halogenated hydrocarbons • Limited resistance to polar solvents (swelling) • Good resistance to cold • Outstanding temperature resistance • Very good resistance to ozone, oxygen, aging and weather • Good flame resistance, self-extinguishing • Highest life cycle also at highest compressive set • Absolutely smooth surface • Gastight sealing even at lowest surface pressure

Technical specification

• Material: FPM (fluorinated rubber) • Colour: black • Shore hardness A: 30° ±5° (DIN 53505) • Density: 0.95 g/cm3 • Temperature range: -25 to +250 °C, for a short time +300 °C • Tolerance: DIN 7715 P3

Item 331733 331734 331735 331736 331745

A mm

B mm

Unit m

Price EURO

5 5 5 5 15

3 3 5 5 3

1 3 1 3 1

32.00 84.00 54.00 98.00 75.00

14 THOMAPLAST® III - 2015

A mm

B mm

Unit m

Price EURO

15 20 20 30 30 40 40 15 15 5 10 10 15 15 15 20 20 25 25 30 30 10 10 15 15 20 20 25 25 30 30 15 15 20 20 25 25 30 30 40 40 20 20 30 30 40 40 30 30

3 3 3 3 3 3 3 4 4 5 5 5 5 5 5 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 30 30

3 3 5 3 5 3 5 3 5 5 3 5 1 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 1 3 1 3 1 3 1 3 1 3 1 3

100.00 90.00 120.00 135.00 180.00 180.00 240.00 90.00 120.00 144.00 134.00 190.00 108.00 184.00 260.00 226.00 314.00 284.00 392.00 312.00 424.00 264.00 378.00 312.00 424.00 378.00 504.00 436.00 588.00 516.00 676.00 420.00 560.00 516.00 676.00 540.00 720.00 180.00 432.00 240.00 576.00 159.00 381.00 240.00 576.00 321.00 770.00 357.00 856.00

THOMAPLAST®-High-Tech Foam Rubber Rectangular Profile made of Silicone Application area

• Sealing technology, insulation technology, shock absorbence, electronics

Semi-Finished Products - Foam Rubbers

Profiles

Product specification

Item

• Very good elastic behavior • Outstanding resistance to cold • Excellent resistance to heat and hot air • Very good resistance to ozone, aging, and weather • Dielectrical (non-conducting) properties • Very good physiological properties • Antiadhesive surface • High permeability to gases

Technical specification

• Material: silicone (silicone rubber) • Colour: light beige or white • Shore hardness A: 15° ±5° (DIN 53505) • Temperature range: -50 to +200 °C • Density: approx. 0.5 g/cm3 • Tolerance: DIN ISO 3302-1 E3 • Design: foamed, with skin on both sides

Item 13823 13824 13819 13820 340578 340579 13825 13826 13827 13828 13829 13830 13831 13832 340580 340581 340582 340583 340584 340585 13821 13822 340586 340587 340588 340589 340590 340591 340592

A mm

B mm

Colour

Unit m

Price EURO

20 20 5 5 5 5 10 10 10 10 15 15 20 20 6 6 3 3 5 5 10 10 10 10 12 12 5 5 10

3 3 5 5 5 5 5 5 6 6 6 6 6 6 8 8 10 10 10 10 10 10 10 10 12 12 15 15 15

beige beige beige beige white white beige beige beige beige beige beige beige beige white white white white white white beige beige white white white white white white white

5 10 5 10 5 10 5 10 5 10 3 5 3 5 5 10 5 10 5 10 3 5 5 10 5 10 5 10 5

118.00 215.00 77.00 133.00 58.00 108.00 100.00 182.00 118.00 215.00 100.00 149.00 131.00 197.00 66.00 114.00 66.00 114.00 70.00 120.00 121.00 182.00 68.00 120.00 108.00 190.00 86.00 152.00 108.00

A mm

B mm

Colour

Unit m

Price EURO

10 15 15 5 5 10 10 15 15 20 20 10 10 15 15 20 20 10 10 15 15 20 20 30 30 35 35 10 10 20 20 30 30 10 10

15 15 15 20 20 20 20 20 20 20 20 25 25 25 25 25 25 30 30 30 30 30 30 30 30 35 35 40 40 40 40 40 40 50 50

white white white white white white white white white white white white white white white white white white white white white white white white white white white white white white white white white white white

10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

190.00 156.00 274.00 104.00 184.00 140.00 246.00 182.00 312.00 206.00 344.00 172.00 298.00 240.00 400.00 258.00 430.00 208.00 364.00 230.00 386.00 308.00 514.00 388.00 620.00 542.00 868.00 274.00 476.00 408.00 684.00 460.00 736.00 344.00 602.00

340593 340594 340595 340596 340597 340598 340599 340600 340601 340602 340603 340604 340605 340606 340607 340608 340609 340610 340611 340612 340613 340614 340615 340616 340617 340618 340619 340620 340621 340622 340623 340624 340625 340626 340627

Plastics THOMASTABIL®-Profiles made of Glass Fiber Reinforced Plastic GFRP Application area:

• Laboratory technology, electroplating technology, electrical engineering

General product specification:

• Self-extinguishing and halogen-free • Linear stress-strain behavior • Low weight, electrically insulating • Chemical-resistant, corrosion-resistant and weatherproof • UV-resistant • High economic efficiency, high stability • Metal-free, unmagnetic • Thermally insulating

THOMAPLAST® III - 2015 15

Semi-Finished Products - Plastics

Profiles

• The unsaturated polyester resins are among the most commonly used resins in composite materials. UP resins are a colourless to slightly yellow solution of unsaturated polyester in a reactive solvent, usually styrene. At room temperature or by supply of heat, they are cured, whereby a heat reaction is released.

Item 306407 306408 306409 306410 306411 306412 306413

General technical specification:

• Material: Resin: polyester Reinforcing fibers: glass fibers • Design: pultruded • Color: dark gray / white • Density: 2 g/cm3 • Temperature range: -100 to +155 °C, for a short time +180 °C • Impact toughness (IZOD): 300 kJ/m2 • Interlaminar shear strength: 25 MPa • Volume resistivity: 1010 - 1015 Ohm * cm • Surface resistance: 1010 - 1015 Ohm • Breakdown strength: 5 - 10 kV/mm • Comparative tracking index (CTI): KA 3c / KB 500 / KC 600 • Dielectric constant: <5 • Coefficient of linear thermal expansion: 12 x 10-6 1/K • Thermal conductivity: 0.2 - 0.6 W/m*K • Specific heat capacity: 1.0 - 1.2 kJ/kg*K • Water absorption: 0.15 % • Dimensional stability by Martens method: +200 °C • Resistance to glow heat: level 2b • Elongation at break: 1.0 - 1.8 % • Barcol hardness: >40 • Tolerances: Height and width: ±0.5 % Wall thickness: 0 - 2 mm ±0.15 mm, 2 - 5 mm ±0.20 mm, 5 - 10 mm ±0.35 mm • Fire class: B2, UL94 V-1, UL 94 V-0, DIN 5510 S4 SR2, ST2, ASTM E84 < 25, ASTM D635 All following measured values are depending on the test direction: parallel (II) or perpendicular (+) to the fibers. • Tensile strength: II: 250 MPa; +: 30-80 MPa • Tension stress: II: 135 MPa (short-term); 70 MPa (long-term)

B mm

Unit mm

Price EURO

20 30 30 30 30 40 40

3 3 3 5 5 5 5

1,000 500 1,000 500 1,000 500 1,000

62.00 44.00 72.00 56.00 94.00 62.00 106.00

THOMASTABIL®-L-Profile made of Glass Fiber Reinforced Plastic GFRP

Item 306420 306421 306422 306423 306424 306425 306426 306427 306428 306429

THOMASTABILT®-Rectangular Profile made of Glass Fiber Reinforced Plastic GFRP

A mm

B mm

C mm

Unit mm

Price EURO

20 20 30 30 40 40 40 40 40 40

3 3 5 5 3 3 5 5 8 8

500 1,000 500 1,000 500 1,000 500 1,000 500 1,000

40.00 68.00 50.00 84.00 72.00 120.00 88.00 148.00 94.00 168.00

THOMASTABIL®-U-Profile made of Glass Fiber Reinforced Plastic GFRP

Item 306400 306401 306402 306403 306404 306405 306406

A mm

B mm

Unit mm

Price EURO

10 10 12 12 15 15 20

5 5 8 8 3 3 3

500 1,000 500 1,000 500 1,000 500

28.00 46.00 32.00 54.00 36.00 58.00 38.00

16 THOMAPLAST® III - 2015

Item 306435 306436 306437 306438 306439 306440

A mm

B mm

C mm

Unit mm

Price EURO

20 20 25 25 40 40

21 21 20 20 20 20

4 4 3 3 4 4

500 1,000 500 1,000 500 1,000

44.00 72.00 46.00 78.00 58.00 96.00

Semi-Finished Products - Metals

Profiles

Metals

Adhesives and Lubricants Greases

THOMASTABIL®-Shaped Bar made of Aluminum

THOMASANN®-PTFE Slip Grease

Product specification

• Material standard BS 1474 HE9TF • Material: AIBS 1474

Application area

• Slow-moving gearwheels, ball/roller/friction bearings as well as articulated joints, hinges etc.

Product specification

Item

Width mm

Height mm

300598 300599 300600 300601 300602 300603 300604 300605

12.7 19.05 25.4 38.1 12.7 19.05 25.4 38.1

Design Thickness mm L L L L U U U U

3.175 3.175 3.175 3.175 3.175 3.175 3.175 3.175

Length mm

Price EURO

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

19.00 27.00 35.00 50.00 24.00 37.00 50.00 76.00

THOMASTABIL®-L-Profile made of Stainless Steel Product specification

• Seamless type 316L according to ASTM 269 • Austenitic, corrosion-proof and antimagnetic steel • Easy to process and to polish • Improvement of mechanical properties by cold processing • Typical use in chemical engineering, food processing, gas and oil industries, in hospital engineering and in vehicle construction, wherever corrosion resistance is required.

• The heavy-duty slip grease is a PTFE based universal lubricant. • It does not show any signs of ageing or gumming even after extended periods of use because of the use of high-grade ingredients, and minimizes the jerking movements after long periods of use, thus having a wear-preventing effect. • Outstanding lubricating quality • Highest UV-stability and resistance to aging • Resistant to acids and alkalis • Outstanding resistance to sea water • Excellent resistance to solvents • No drying up even after a long time • Free of toxic and ecologically harmful components • Above +290 °C generation of toxic vapors • Outstandingly sparing in use • For slip surfaces in all inside and outside areas • Field-proven packages for laboratory and industry

Technical specification

• Material: PTFE (polytetrafluoroethylene / polydimethylsiloxane) • Consistency: odorless, pure-white paste • Density: 1.44 g/cm3 • Particle size: 5 - 6 µm • Temperature range: -50 to +230 °C (permanent use) • Decomposition temperature: >+260 °C • Melting poinit: +327 to +342 °C • Inflammation temperature: >+400 °C • Friction coefficient: 0.02 to 0.1 (depending on the test method) • No influences of: sunlight, acids and alkalis

Item

Item 300582 300583 300584 300585

Thickness mm

Dimensions mm

Length mm

Price EURO

3 3 5 6

20 x 20 25 x 25 40 x 40 50 x 50

1,000 1,000 1,000 1,000

48.00 58.00 104.00 130.00

18317 18318 18319 18320

Bundle

Volume g

Unit piece

Price EURO

tube tin tin tin

50 500 1,000 5,000

1 1 1 1

41.00 146.00 202.00 568.00

THOMAPLAST® III - 2015 17

Adhesives and Lubricants

Greases

THOMASANN®-PTFE Universal Grease Product specification

• Extremely stable, synthetic high-temperature paste in resealable tube. • Exceptionally low friction coefficient. • Extremely long-lasting. • For temperatures between -36 and over +260 °C. • Resists high mechanical loads. • Not soluble in most solvents. • Non-flammable, oxygen-resistant. • Compatible with all common elastomers and plastics. • Chemical resistance against aggressive chemicals or solvents.

• In surroundings with high moisture please note: Depending on the degree of cure, the respective one-component adhesive forms a microporous structure which can make up approx. 2 - 5 % of the total volume. The degree of porosity depends on the cure cycle type, and whether one or more layers are applied. The size and the number of pores are determined by the evaporation temperature of the binder (water). If the water is expelled by an accelerated heat treatment, more and larger pores are formed. The natural evaporation is approx. 36 hours, the number of pores is accordingly very low. All High-Therm adhesives are cured faster by heat treatment. Due to heat treatment, all properties improve considerably.

General technical specification

• Curing: at room temperature after 48 hours, better properties after heat treatment • Moisture resistance: good (after heat treatment) • Resistance to acids and alkalis: very good (except HF) • Resistance to oxidation: very good • Resistance to solvents: very good • Resistivity: >107 Ohm/cm at room temperature • Shrinkage: 5 - 6 % (linear at +150 to +500 °C)

Item

Volume g

Unit piece

Price EURO

120.00

40995

THOMASANN®-High-Therm Adhesive/Thinner for Ceramic Application area

• Thinner for all one-component adhesive types and adhesives for fine clefts • Thin adhesive bonds and layers, sprayable

Technical specification

Adhesives One-component THOMASANN®-Adhesives for Ceramic and Metal Application area

• As adhesive for ceramic and metal elements in high temperature range. • As glaze for protection from corrosion and chemical impacts. • IC fault analysis in preparation technology. • Adhesive bonding of metals and ceramics. • As refractory lining in industrial furnace construction. • Fixation and embedding of heating wires, resistance wires, and thermo wires. • Coating of metal surfaces for protection from oxidation processes.

• Colour: clear, aqueous liquid • Consistency: liquid • Continuous temperature load: +700 °C after curing • Softening temperature: +750 °C • Spec. weight: 1.45 g/cm3 • Viscosity: 70 cp at +20 °C • Pot life: approx. 30 min. in the air • Dielectric strength: >1 kV/mm • Thermal expansion: 7 - 12 x 10-6/K

General product specification

• One-component adhesives curing at room temperature by evaporation of the binder (water). • Bonding best takes place at room temperature, thus ensuring a natural drying. The drying time depends on the porosity of the materials to be bonded. In such cases, a drying time of 24 hours is sufficient. • The parts to be bonded should be exposed to a slight and constant pressure. A heat treatment during the bonding process improves the mechanical, thermal and electrical properties considerably. • For optimization of the bonding process it is advantageous to brush the glue joints with concentrated sulfuric acid, thus increasing the resistance to moisture. • The adhesives are resistant to solvents, and after heat treatment up to +900 °C also to most acids, including conc. hydrochloric acid and sulfuric acid, except to hydrofluoric acid. • The adhesive is absolutely fire-proof and not skin-irritating when cured. But the one-component material is strong alkaline (approx. pH 12) before application so that skin contact should be avoided.

18 THOMAPLAST® III - 2015

Item 332039 332040

Bundle

Volume ml

Unit piece

Price EURO

tin tin

250 1,000

1 1

48.00 164.00

Adhesives and Lubricants - One-component

Adhesives

THOMASANN®-High-Therm Adhesive for Porous Glued Surfaces

Item

Bundle

Volume ml

Unit piece

Price EURO

tin tin

250 1,000

1 1

52.00 126.00

Application area

332043 332044

Technical specification

THOMASANN®-Silicone Rubber Adhesives

• For bonding of porous materials, as surface protection against corrosion and oxidation in the high temperature range • Colour: whitish • Consistency: low viscosity paste for painting, filling, dipping, metering with dispensers and syringes • Continuous temperature load: +1,000 °C after curing • Softening temperature: +1200 °C • Melting point: +1400 °C • Spec. weight: 2.0 • Viscosity: >1.0 x 106 cp at +20 °C • Pot life: approx. 1 h in the air • Dielectric strength: >2 kV/mm • Thermal expansion: 9 - 12 x 10-6/K

Application area

• For adhesive bonding of silicone to: silicone, elastomers (TPE), plastics (such as PMMA or PTFE etc.), metals, glass

General product specification

• Room-temperature-vulcanizing (curing) one-component silicone rubber adhesive that requires no crosslinkers. • Ideal skin-over time of approx. 20 min. • Ready-to-use, easy to handle, and formable. • Complete curing after 24 hours • In cured state repeatedly autoclavable without impairment of shelf life. • Optimal adhesion on clean, dry and grease-free surfaces. • Thixotropic soft paste, does not drop and flow. • Optimal viscosity (flow properties). • Permanently elastic properties. • Constant electrical properties • Delivery package: tube

General technical specification

• Shore hardness A: 30° • Shrinkage: 1 % (linear) • Shelf life: at least 9 months (expiry date printed)

Item 332041 332042

Bundle

Volume ml

Unit piece

Price EURO

tin tin

250 1,000

1 1

52.00 126.00

THOMASANN -High-Tech Adhesive for Metal and Ceramic Bonding ®

Application area

• Adhesive bonding of metal/metal, ceramic/ceramic, metal/ceramic.

Technical specification

• Colour: whitish • Consistency: creamy, viscous compound / paste • Continuous temperature load: +1,000 °C after curing • Softening temperature: +1200 °C • Melting point: +1400 °C • Spec. weight: 2.45 • Viscosity: >1.5 x 106 cp at +20 °C • Pot life: approx. 1 h in the air • Dielectric strength: >3 kV/mm • Thermal expansion: 7 - 12 x 10-6/K

THOMASANN®-Silicone Rubber Adhesive small-scale adhesion Product specification

• Particularly suited for electrical assemblies and repairs. Excellent bonding force between silicone rubber and glass as well as silicone rubber and metals.

Technical specification

• Colour: white • Max. temperature: +200 °C, for a short time +260 °C • Spec. weight: 1.07 • Tearing strength: 450 % • Tear resistance: 8 kg/cm • Dielectric strength: 20 kV/mm • Volume resistivity: 3 x 1015 Ohm/cm

Item 331684

Bundle

Volume g

Unit piece

Price EURO

tube

82.8

66.00

THOMAPLAST® III - 2015 19

Adhesives and Lubricants - One-component

Adhesives

THOMASANN®-High-Therm-Silicone Rubber Adhesive

THOMASANN®-PVC Adhesive

Product specification

• Excellently suited for extremely high temperatures up to +315 °C. At highest temperatures the physical properties change only slightly.

Technical specification

• Colour: red • Max. temperature: +260 °C, for a short time +315 °C • Spec. weight: 1.07 • Tearing strength: 400 % • Tear resistance: 7 kg/cm • Dielectric strength: 20 kV/mm • Volume resistivity: 3 x 1014 Ohm/cm

Item 331685

Bundle

Volume g

Unit piece

Price EURO

tube

82.8

102.00

THOMASANN®-Silicone Rubber Adhesive large-scale adhesion Product specification

• Particularly suited for large-scale adhesions. • 100 % solvent-free

Technical specification

• Colour: transparent • Max. temperature: +180 °C, for a short time +250 °C • Spec. weight: 1.09 • Tearing strength: 500 % • Tear resistance: 13 kg/cm • Dielectric strength: 21 kV/mm • Volume resistivity: 8 x 1014 Ohm/cm

Technical specification

Item 27458

• PeViCol is ideally suitable for adhesion of plastic valves, fittings, pipes and hoses made of PVC, of parts made of the same or different thermoplastics (PVC-U, non-rigid PVC, PVC-C). • PeViCol is used for adhesion of small as well as of very big pipeline components. • PeViCol is pure PVC, dissolved in N-Methyl-2-Pyrrolidon, with thixotrope properties. It has the same temperature and pressure resistance like PVC-U. The adhesions are water, acid and base resistant. • Due to its hygroscopic properties, PeViCol absorbs water or air humidity while setting. The joint becomes white - an excellent visual quality control. • The bonding with PeViCol requires gluing surfaces free of grease and cleaned with blotting paper or crep paper. For this purpose it is recommended to use Tangit® cleaner (item 350158). • Best application temperature: +10 to +60 °C • Air humidity: 30 - 80 % • Wet life: depends on the air humidity, i.e. the higher the air humidity the shorter the wet life; at +20 °C and 60 % air humidity the wet life is 4 - 5 minutes • Setting time: The setting time may be considerably shortened by turning the jointed parts in reverse direction until a noticeable resistance is felt. The adjustment is to be made with the last rotation. • Loading of glued joint (pipes <DN 65): setting time 1h: 2 bar pressure load setting time 2h: 3 bar pressure load setting time 3h: 4 bar pressure load setting time 4h: 5 bar pressure load, thereafter with 1 bar per hour in addition • Loading of glued joint (pipes >DN 65): The pressure test or commissioning should be made not earlier than 24 hours after the latest gluing. • Waste disposal and cleaning: Dilute PeViCol rests with water and dispose acc. to regulations. Keep brush airtight. Precipitated PVC is to be disposed like the PVC material. The solvent, at a ratio of 1:100, is degradable. • Recommended protection equipment: Wear gloves made of Neoprene or cream hands with skin cream with oil. In case of splashing danger wear tightly closing protective goggles.

Bundle

Volume g

Unit piece

Price EURO

tube

64.00

• Consistency: liquid • Colour: clear/yellowish • Boiling point: +202 °C • Freezing point: -24 °C • Flashing point: +93 °C • Lower Ex-limit: 1.3 Vol.-% • Upper Ex-limit: 9.5 Vol.-% • Auto ignition temperature: +346 °C • Saturated vapour pressure: 0.053 mbar (+20 °C) • Saturation concentration: 525 ppm • Viscosity: 9,000 mPas (+23 °C) • Density: 1.08 g/cm3 (+23 °C) • Water solubility (solvent): 100 % • Solvent content: 80 % • Solids content: 20 % • Acid resistance of glued joints: sulphuric acid up to 80 %, hydrochloric acid up to 36 %, nitric acid up to 45 %, hydrofluoric acid up to 10 % • Delivery form: standard in PE bottles • Minimum durability: 12 months after filling • Safety note: safety data sheet (print 310 129) acc. to 91/155/EWG • Regulations: DIN 16970, BS 6209 and BS 6920, approved up to PN 16; ASTM D 2564-96a (97) and NSF-61, point 9 (toxicity); NS 2944, point 6.4

20 THOMAPLAST® III - 2015

Adhesives and Lubricants - One-component

Adhesives Item

Volume g

Unit piece

Price EURO

500 1,000

1 1

60.00 116.00

350156 350157

THOMASANN®-High-Tech Cyanoacrylate Adhesive Standard Plastics Product specification Item 350152 350153

Volume g

Unit piece

Price EURO

• Very quickly curing low-viscous adhesive on cyanoacrylic acid methyl ester basis with pronounced capillary passing properties, especially for plastics/plastics

500 115

1 1

68.00 44.00

Technical specification

Tangit®-PVC-U Adhesive Product specification

• Solvent-containing special adhesive based on THF (tetrahydrofuran, stabilized) for tensile-resistant connection between pressure pipes (e.g. drinking water and gas pipes) and pipe couplings made of PVC-U, and for adhesive bonding of conduits, sewage pipes, eaves gutters etc. made of this material. The cured adhesive meets the conditions of admission for drinking water supply via PVC-U pipes acc. to Recommendation No. VIII issued by the Plastics Committee of the German Health Office. • The bonding with Tangit® PVC-U adhesive requires gluing surfaces free of grease and cleaned with blotting paper or crep paper. For this purpose it is recommended to use Tangit® cleaner (item 350158).

Technical specification

• Raw material basis: PVC-U (polyvinyl chloride, free of plasticizers), THF (tetrahydrofuran, stabilized), methyl ethyl ketone, cyclohexanone • Density: approx. 0.96 g/ml • Temperature range: -15 to +60 °C • Viscosity: 1800 - 3500 mPas (at +23 °C) • Resistibility: waterproof • Storage: should not be stored at temperatures below +5 ºC since this leads to a higher viscosity and thickening of the adhesive, thus affecting its workability • Shelf life: at +20 °C at least 12 months for Tangit in tubes and 24 months for Tangit® in tins from the date of filling • Regulations: Complies with DIN 16970, KRV Guideline R 1.1.7 and the principles for the construction and testing of drainage pipes; meets the requirements of BS 4346, Part 3, and ASTM D 2564, NEN 7106

• Viscosity: approx. 2 mPas • Spec. weight: 1.01 • Flash point: +83 °C • Danger class: A III (VbF) • Refractive index: 1.845 • Softening temperature: >+175 °C • Thermal coefficient of expansion: 1.26 x 10-4/K (ASTM-D-695) • Thermal conductivity: 0.25 W/mK (DIN 52612/1) • Resistivity: 6.1 x 10-4 Ohm cm2 (at 10 MHz) (DIN 53482) • Dielectric constant: 3.50 (at 10 MHz) (DIN 53480) • Track resistance: KA 1 (DIN 53480) • Curing time for adhesive bonding of: ABS 12 sec.; PA 20 sec.; PVC (rigid) 7 sec. • Tensile strength for adhesive bonding of: ABS 18.4 N/mm2; PA 8.2 N/mm2; PVC (rigid) 35.5 N/mm2 • Tensile/shear strength for adhesive bonding of: ABS 5.4 N/mm2 (break of material); PA 4.3 N/mm2; PVC (rigid) 5.5 N/mm2 (break of material) • Shelf life: 6 months at +20 °C, 12 months at <+5 °C (in original package)

Item

Volume g

Unit piece

Price EURO

2 20 500

2 1 1

33.00 60.00 335.00

45417 45418 45420

THOMASANN®-High-Tech Cyanoacrylate Adhesive Plastic/Metal Application area

• High-tenacity plastics/plastics and plastics/metal adhesive bonding Item 350154 350155

Volume g

Unit piece

Price EURO

125 250

1 1

26.00 36.00

Product specification

• Universally usable, quickly curing adhesive on cyanoacrylic acid ethyl ester basis of low viscosity and pronounced flow and wetting properties.

THOMAPLAST® III - 2015 21

Adhesives and Lubricants - One-component

Adhesives

Technical specification

• Viscosity: 40 mPas (non-cured) • Flash point: +83 °C • Danger class: A III (VbF) • Softening temperature: >+175 °C • Thermal coefficient of expansion: 1.2 x 10-4/K (ASTM-D-695) • Thermal conductivity: 0.25 W/mK (DIN 52612/1) • Resistivity: 6.1 x 10-4 Ohm cm2 (at 10 MHz) (DIN 53482) • Dielectric constant: 3.50 (at 10 MHz) (DIN 53480) • Track resistance: KA 1 (DIN 53480) • Curing times for adhesive bonding of: ABS 12 sec.; PA 20 sec.; PVC (rigid) 8 sec. • Tensile strength for adhesive bonding of: ABS 18.5 N/mm2; PA 8.6 N/mm2; PVC (rigid) 35.6 N/mm2 • Tensile/shear strength for adhesive bonding of: ABS 5.6 N/mm2 (break of material); PA 4.2 N/mm2; PVC (rigid) 5.2 N/mm2 • Shelf life: 6 months at +20 °C, 12 months at <+5 °C (in original package)

Item

Volume g

Unit piece

Price EURO

2 20 500

2 1 1

35.00 49.00 384.00

45429 45430 45432

THOMASANN®-Adhesive for-Polypropylene Application area

• Adhesive bonding of polypropylene and analogous plastics.

Product specification

• Special one-component adhesive formulation with primer in userfriendly small package size as set containing 20 g adhesive and 100 ml primer.

Item

Volume g

Unit piece

Price EURO

2 20 500

2 1 1

33.00 45.00 335.00

45421 45422 45424

THOMASANN®-High-Tech Cyanoacrylate Adhesive Application area

• Plastics adhesive bonding of high fitting accuracy • Adhesive bonding after basic assembling

Item

Product specification

45723

Bundle

Unit piece

Price EURO

20 g adhesive, 100 ml primer

129.00

• Extremely quick-curing special adhesive for hardly bondable plastics such as EPDM, APTK, FPM, etc. of very low viscosity and excellent capillary passing property.

THOMASANN®-Thread Locking Adhesive

Technical specification

Application area

• Viscosity: approx. 2 mPas (non-cured) • Flash point: +83 °C (non-cured) • Danger class: A III (non-cured) (VbF) • Softening temperature: >+175 °C • Thermal coefficient of expansion: 1.2 x 10-4/k (ASTM-D-695) • Thermal conductivity: 0.25 W/mK (DIN 52612/1) • Resistivity: 6.1 x 10-4Ohm cm2 (at 10 MHz) (DIN 53482) • Dielectric constant: 3.5 (at 10 MHz) (DIN 53483) • Track resistance: KA 1 (DIN 53480) • Curing times for adhesive bonding of: ABS 5 sec.; APTK 10 sec.; EPDM 10 sec.; PA 12 sec.; PVC (rigid) 3 sec. • Tensile strength for adhesive bonding of: ABS 16.4 N/mm2; APTK 10.2 N/mm2 (break of material); EPDM 8.5 N/mm2 (break of material); PA 6.3 N/mm2; PVC (rigid) 30.2 N/mm2 • Shelf life: 6 months at +20 °C, 12 months at <+5 °C (in original package)

22 THOMAPLAST® III - 2015

• Permanent locking of screw and bolt connections

Product specification

• Thixotropic, solvent-free, methyl acrylate-based one-component adhesive; heavy metal catalyzed anaerobic curing on metal surfaces without residual softness, heat-loadable, red coloured for identification. • The curing time and the functional stability indicated in the technical specification are dependent on the kind of material and the thickness of the adhesive layer. The breakaway torque is defined as the strength value measured with the first relative movement between nut and bolt thread. Used threads: M10x20 DIN 933-8.8 blackened; nut M10 DIN 934-8 bright; curing time 72 hours. The follow-on torque is calculated from the mean speed torque after 1/4, 1/2, 3/4 and 1 turn when unscrewing the M10 bolt connection. • Handling: see THOMASANN®-Thread Safety Adhesive (item: 43067-43069).

Adhesives and Lubricants - Two-component

Adhesives

Technical specification

• Max. allowance: 0.12 mm • Curing time: 10 to 45 minutes (at room temperature) • Functional stability: after some hours • Viscosity: 1300 mPas (non-cured) • Breakaway torque: 20 - 25 Nm • Mean follow-on torque: 30 - 45 Nm • Achievable stability range: highly stable (after curing) • Temperature range: -55 to +150 °C • Shelf life: 12 months at +20 °C

• Temperature range: -25 to +130 °C, for a short time +150 °C • Min. curing time: 72 h at room temperature • Flashing point: -18 °C • Pot life: 60 min. at +23 °C • Applied pressure: 0.2 – 0.5 N/mm2 • Tensile shear strength: at +23 °C: >3.0 N/mm2 at +100 °C: >0.9 N/mm2 • Peel strength: at +23 °C: 5.1 N/mm width at +100 °C: 1.5 N/mm width • Applied quantity: 250 - 300 g/m2 for application on both sides • Mixing ratio adhesive/hardener: 20:1 • Shelf life: approximately 1 year (at +18 to +25 °C)

Item 60385

Bundle

Unit piece

Price EURO

750 g adhesive, 65 g hardener, 250 ml etching agent

325.00

THOMASANN®-PTFE-Adhesive based on Epoxy Resin Item

Volume g

Unit piece

Price EURO

50 100 1,000

1 1 1

54.00 72.00 126.00

43070 43071 19032

Two-component THOMASANN®-PTFE Adhesive based on Synthetic Rubber (Contact Adhesive) Application area

• For adhesive bonding of parts made of PTFE to other materials

Product specification

• Convenient handling; after adhesion still elastic; curing at room temperature • Water resistant, high durability against acids, alkalis, and petrol • Not resistant to oils; correction not possible; easily inflammable; keep away from open fire • The adhesive kit contains: One tube pretreating agent for PTFE containing an active sodium solution. This solution eliminates fluorine atoms from the PTFE surface and leaves a carbon-containing film every adhesive sticks to. Kit content: 750 g adhesive, 65 g hardener, 250 ml etching agent The adhesive kit contains enough material for treating the PTFE surface and for adhesive bonding.

Application area:

• Bonds PTFE to all common materials (made of glass, wood, metal, ceramic etc.)

Product specification

• Good resistance to fuels and mineral oils • Excellent resistance to impact stress and vibrations • Good workability; curing at room temperature; correction possible • Lower resistance to heat seal adhesives • Epoxy adhesive is supplied in two separate containers, resin and hardener

Technical specification

• Temperature range: -60 to +140 °C, for a short time +170 °C • Min. curing time: at +5 °C: 72 h, at +23 °C: 8 h, at +100 °C: 10 min. • Flashing point: adhesive: +110 °C, hardener: +71 °C • Pot life: 30 min. at +23 °C • Applied pressure: 0.2 - 0.5 N/mm2 • Tensile shear strength: at +23 °C: >3.0 N/mm2, at +100 °C: >2.6 N/mm2 • Peel strength: at +23 °C: 7.0 N/mm width, at +100 °C: 2.8 N/mm width • Applied quantity: 200 - 400 g/m2 à glue joint • Mixing ratio adhesive/hardener: 100:40 • Shelf life: approximately 1 year (at +18 to +25 °C)

Item 60380

Bundle

Unit piece

Price EURO

400 g hardener, 1,000 g adhesive

298.00

THOMASANN®-Fluoroelastomer Universal Adhesive

Product specification

• For bonding of fluoroelastomers and other materials, such as elastomers (e.g. chloroprene rubber), some thermoplasts, leather, metals, wood, glass, paper, and textiles. • High yield as 100 g of the universal adhesive are sufficient for approx. 700 cm². • Before application of the adhesive, the bonding surface has to be prepared to be clean, dry, and free of fat. Roughening of the surface is advantageous. For cleaning the surface it is recommended to use a ketonic solvent for bonding of elastomers and a chlorinated one (e.g. trichloroethylene) for bonding of metals.

THOMAPLAST® III - 2015 23

Adhesives and Lubricants - Two-component

Adhesives

• Processing: Adhesive and cross-linker (catalyst/activator) have to be mixed homogeneously and without inclusion of air. The active adhesive can be stored at 0 °C for approx. 15 days in an absolutely closed container. Apply the activated adhesive on every surface. Let it dry until no adhesive remains after having touched it. Drying time is approx. 10-15 min. Bonding is achieved by pressing both bonding surfaces together. Pressure time approx. 15 min. Preparing of the bonding surfaces with primer (priming) is indicated. Complete bonding after a drying time of approx. 48 hrs. Shelf life in original package (non-activated) 6 months. Avoid skin contact and breathing-in of the cross-linker (activator).

• Cure time: at +25 °C: 18 hours, at +40 °C: 3 hours, at +70 °C: 50 minutes, at +100 °C: 10 minutes • Lap shear strength: 18 N/mm2 (DIN 53283) • Dielectric strength: >22 kV/mm2 (of the cured adhesive) • Thermal conductivity: 0.28 W/K x m at +28 °C (of the cured adhesive) • Water vapor permeability: 16 g/m2 (at +38 °C, 90 % rh) in 24 h of a cured 1 mm layer • Shelf life resin and hardener: 2 years at <+25 °C (in sealed containers)

Item

Volume g

Unit piece

Price EURO

250 2,000

1 1

146.00 990.00

19164 19165

THOMASANN®-Epoxy Resin Construction Adhesive Application area

• Fuel-, mineral oil- and water-resistant adhesive bonding of metals, ceramics and plastics.

Product specification

• Modified, room-temperature-curing, two-component epoxy resin adhesive for mechanical and electrical loads, consisting of viscous, opaque, bisphenol-based resin component AW 106 and light yellow, polyamide-based hardener HV 953 U. Adhesive components are available in 1,000 g containers, hardener in 800 g containers. • Handling: Adhesive components and hardener are carefully blended in equal parts by volume (equivalent to 100 parts by weight of binder and 80 parts by weight of hardener). The surfaces to be bonded should be cleaned with a good degreasing agent such as acetone. Alcohol, gasoline (petrol) or paint thinners should never be used. Additional mechanical roughening followed by a second degreasing treatment of the surfaces improves the bonding strength considerably. The homogeneously mixed adhesive is applied with a spatula in a thin layer to both adhesive surfaces. The joint components should be assembled and clamped as soon as the adhesive has been applied. An even contact pressure throughout the joint area will ensure optimum cure. A layer of adhesive 0.05 to 0.1 mm thick will normally impart the greatest lap shear strength to the joint.

Technical specification

• Flash point: resin components: +210 °C, hardener: +110 °C • Density: resin components: 1.2 g/cm3, hardener: 0.95 g/cm3 • Viscosity at +25 °C: resin components: approx. 35,000 mPa x s, hardener: approx. 27,500 mPa x s • Initial mixing viscosity: approx. 45,000 mPa x s • Pot life: at least 100 minutes (at +23 °C)

24 THOMAPLAST® III - 2015

Item

Bundle

Volume g

Unit piece

Price EURO

954871 954872

adhesive hardener

1,000 800

1 1

95.00 87.00

Pastes THOMASANN®-Fluoroelastomer High-Duty Sealing Compound Application area

• Coating and packing material in chemistry and process engineering, as well as in apparatus construction • Nut sealing • Packing of cavities

Product specification

• Highly heat-resistant, elastic sealing compound consisting of one component • Very good resistance to aging and weather • Very good resistance to ozone • Flame-resistant • Very good adhesion on metal, wood, cardboard, paper, leather, every kind of fabric, chamotte, and concrete • Stable at boiling temperature • Metals have to be degreased preferably with trichloroethylene. Degreasing by use of a trichloroethylene steam-jet is recommended for very dirty material. • For better adhesion the material should be primed with THOMASANN®primer after cleaning • If stored in a cool place shelf life is approx. 12 months • Highest resistance to most inorganic and organic media and flue gases

Technical specification

• Material: FPM (vinylidene fluoride-hexafluoropropylene copolymer) MIBK (methyl isobutyl ketone) • Colour: black • Material mixture: ≈70 % FPM and ≈30 % MIBK with integrated cross-linker • Density: 1.65 g/cm3 (DIN 53479) • Package form: cartridge

Adhesives and Lubricants

Pastes

• Temperature range: -50 to +300 °C • Decomposition temperature: when exceeding +300 °C elimination of hydrogen fluoride possible when exceeding +400 °C additionally tetrafluoroethylene, hexafluoropropylene, perfluoroisobutylene, and carbonyl fluoride are released • Solubility in water: ≈10 g/l at +20 °C • MAK value: 100,000 ml/m3 or 400,000 mg/m3

THOMASANN®-Filling Compound for Ceramics and Metals

Item

General product specification

301266 301267 301268

Volume g

Unit piece

Price EURO

400 400 400

1 3 5

254.00 624.00 790.00

THOMASANN®-High-Chem PTFE Sealing Paste Product specification

• Odourless and nontoxic paste for all kinds of sealings, non-hardening, eliminates leaks on threads even if high pressure resistance is needed, threaded connections can easily be closed and opened, the threads are prevented from being damaged. • No dropping or flowing during use • Resealable can including brush • Suitable for many bases and acids, any kinds of solvents or gases including hydrogen, ammoniac, chlorine, propane, butane, nitrogen, as well as for air, steam, refrigerants, salt water, and fuels (do not use on liquid or gaseous oxygen and lactic acid).

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: yellow-opak • Temperature range: -240 to +260 °C

Application area

• As adhesive for ceramic and metal elements in high temperature range. • As glaze for protection from corrosion and chemical impacts. • As casting compound for mould making (formed parts) and for insulation applications. • As dip coating for fixing of heating wires. • As casting compound (cement compound) e.g. for insertion of knife blades (into metal or ceramic handles). • IC fault analysis in preparation technology. • As sealing material for gas-tight applications (sealings). • Adhesive bonding of metals and ceramics. • As refractory lining in industrial furnace construction. • Fixation and embedding of heating wires, resistance wires, and thermo wires. • Coating of metal surfaces for protection from oxidation processes. • One-component adhesives curing at room temperature by evaporation of the binder (water). • Bonding best takes place at room temperature, thus ensuring a natural drying. The drying time depends on the porosity of the materials to be bonded. In such cases, a drying time of 24 hours is sufficient. • The parts to be bonded should be exposed to a slight and constant pressure. A heat treatment during the bonding process improves the mechanical, thermal and electrical properties considerably. • For optimization of the bonding process it is advantageous to brush the glue joints with concentrated sulfuric acid, thus increasing the resistance to moisture. • The adhesives are resistant to solvents, and after heat treatment up to +900 °C also to most acids, including conc. hydrochloric acid and sulfuric acid, except to hydrofluoric acid. • The adhesive is absolutely fire-proof and not skin-irritating when cured. But the one-component material is strong alkaline (approx. pH 12) before application so that skin contact should be avoided. • In surroundings with high moisture please note: Depending on the degree of cure, the respective one-component adhesive forms a microporous structure which can make up approx. 2 to 5 % of the total volume. The degree of porosity depends on the cure cycle type, and whether one or more layers are applied. The size and the number of pores are determined by the evaporation temperature of the binder (water). If the water is expelled by an accelerated heat treatment, more and larger pores are formed. The natural evaporation is approx. 36 hours, the number of pores is accordingly very low. • All High-Therm adhesives are cured faster by heat treatment. Due to heat treatment, all properties improve considerably.

THOMASANN®-High-Tech Filling Compound for Smooth Surfaces

Item 301889

Volume g

Unit piece

Price EURO

500

55.00

THOMAPLAST® III - 2015 25

Adhesives and Lubricants

Pastes

Application area

• Paste-like compound for bonding and sealing of smooth surfaces. • As surface protection against corrosion and oxidation in the high temperature range.

Technical specification

• Colour: whitish • Consistency: passive, viscous, trowelable compound for filling • Continuous temperature load: +1200 °C after curing • Softening temperature: +1300 °C • Melting point: +1,500 °C • Spec. weight: 3.15 • Viscosity: >1.5 x 106 cp at +20 °C • Pot life: approx. 1 h in the air • Curing: at room temperature after 48 hours, better properties after heat treatment • Moisture resistance: good (after heat treatment) • Resistance to acids and alkalis: very good (except HF) • Resistance to oxidation: very good • Resistance to solvents: very good • Dielectric strength: 2.8 - 3 kV/mm • Resistivity: >109 Ohm/cm at room temperature • Thermal expansion: 7 - 12 x 10-6/K • Shrinkage: 3 - 6 % (linear at +150 to +500 °C) Item 332045 332046

Bundle

Volume ml

Unit piece

Price EURO

tin tin

250 1,000

1 1

62.00 172.00

Item 332047 332048

Bundle

Volume ml

Unit piece

Price EURO

tin tin

250 1,000

1 1

74.00 252.00

Cleaners and Etching Agents Tangit®-Cleaner for PVC-U Product specification

• Cleaning agent based on acetone and methyl ethyl ketone (MEK), with excellent cleaning properties, for bonded joints made of PVC-U (rigid PVC), PVC-C (post-chlorinated PVC) or ABS (acrylonitrile-butadiene styrene).

Technical specification

THOMASANN®-High-Therm Filling Compound for Ceramic and Metal

• Raw material basis: acetone, MEK (methyl ethyl ketone) • Density: approx. 0.82 g/ml • Shelf life: at least 24 months from the date of filling

Application area

• Paste-like compound for bonding and sealing of metals/metals, ceramic/ceramic, metals/ceramic. • As surface protection against corrosion and oxidation in the high temperature range.

Technical specification

• Colour: gray/whitish • Consistency: trowelable, viscous paste of low porosity for painting, leveling and dipping • Continuous temperature load: +1400 °C after curing • Softening temperature: +1,500 °C • Melting point: +1600 °C • Spec. weight: 3.2 • Viscosity: >2.5 x 106 cp at +20 °C • Pot life: approx. 30 min. to 1 h in the air • Curing: at room temperature after 48 hours, better properties after heat treatment • Moisture resistance: good (after heat treatment) • Resistance to acids and alkalis: very good (except HF) • Resistance to oxidation: very good • Resistance to solvents: very good • Dielectric strength: >3 kV/mm • Resistivity: >109 Ohm/cm at room temperature • Thermal expansion: 4 - 6 x 10-6/K • Shrinkage: 2 - 4 % (linear at +150 to +500 °C)

26 THOMAPLAST® III - 2015

Item 350158 350159

Volume g

Unit piece

Price EURO

125 1,000

1 1

26.00 80.00

THOMASANN®-Etching Agent for PTFE

Adhesives and Lubricants

Sprays

Product specification

• An active sodium solution (high flash point). This solution eliminates fluorine atoms and other fluorinated hydrocarbons from the PTFE surface and leaves a carbon-containing film every adhesive sticks to. • The etching takes place within 30 to 60 seconds at room temperature, at +60 °C within 10 seconds up to a brown colouring of the adhesive surface.

Item 60382

Volume l

Unit piece

Price EURO

0.2

228.00 Item

Volume ml

Unit piece

Price EURO

500

39.00

70299

Sprays

THOMASANN®-High-Tech Antista Conductive Spray

THOMASANN®-PTFE Spray

Application area

Product specification

• Dry, grease-free lubricant, sliding and release agent for use in any sectors of industry and workshops. • The mixing ratio of PTFE and adhesive agents harmonises so that an extremely thin film is applied. • The spray is simply sprayed onto the surface to be treated and makes it easier e.g. to unclamp blocked screws or to close screw joints and ground glass joints. • With simple means you can protect your working place from damage and soiling by spraying onto the surface. • CFC-free • Silicone-free • Temperature-resistant up to +260 °C • Antiadhesive and dirt-repellent • Physiologically safe

• Application of electrically conductive layers of any thickness to all kinds of materials to avoid electrostatic charge. • Antistatic equipment of pneumatic tube systems. • Repairing of damaged shielding in cathode ray tubes. • Dry lubrication of high-voltage switching elements.

Product specification

• Graphite dispersion paint formulation with good adhesion supplied in environment-friendly, CFC-free, safe-to-use aerosol for low-impedance coating of electrically non-conducting materials. • Safe-to-handle aerosol, available in two user-friendly sizes. • Handling: The spray is sprayed sparingly onto the surface to be treated. After drying, the conductivity of the coating can be increased by polishing with a lint-free cloth or buffing wheel, thus improving its strength.

Technical specification

• Colour: anthracite • Spec. weight: 0.82 • Particle size: 1 - 10 μm • Electr. resistance: max. 103 Ohm/cm2, depending on the layer thickness • Drying time: approx. 10 min. at +20 °C if used as intended

Item

Volume ml

Unit piece

Price EURO

400

38.00

45997

THOMASANN®-Silicone Spray Application area

• Parting compound and lubricatant • Surface protection against humidity and corrosion

Product specification

Item 45986 45987

Volume ml

Unit piece

Price EURO

200 400

1 1

20.00 30.00

• Spray coating • The spray is composed of silicone-oil-mixture and White Spirit • Free of CFCs • Working temperature: -40 to +200 °C

THOMAPLAST® III - 2015 27

Adhesives and Lubricants

Sprays

THOMASANN®-Silver Spray

Fastening Elements Nuts

Application area

• For screw joints, seals, valve packings and other connections in piping systems • Screw connections at busbars

Product specification

• High-temperature lubricant in spray form • Contains pure colloidal metals in a lubricant carrier with anti-corrosion and antioxidant additives • Forms a tight film closing irregularities and pores, thus preventing the ingress of moisture into fits and joints • Coatings are resistant to alkalis, most acids and steam

Technical specification

• Temperature range: -180 to +1200 °C • Pressure resistance: 2300 kp/cm

Item

Volume ml

Unit piece

Price EURO

400

72.00

70291

THOMASANN®-Anti Spatter Product specification

• Prevents the adhesion of weld spatter and slag to welding torches, workpieces, jigs and accessories • Improves the stability of the arc during gas-shielded arc welding • Prevents the obstruction of the welding nozzle • Does not affect finishing processes or painting • Saves time by easy removal of weld spatter and slag from metal surfaces • Silicone-free

Item

Volume ml

Unit piece

Price EURO

500

41.00

70302

THOMASANN®-Leak Detection Spray Application area

• For tracing leaks in gas and pressurised air lines

Product specification

• A leak detection spray with corrosion inhibitor making leaks visible by foam formation. It is non-flammable because the active agent consists of a pure aqueous solution; toxicologically safe, skin-friendly and non-corrosive. The leak detector does not form any hazardous and corrosion-promoting compounds in contact with iron, aluminium, copper, brass, carbon dioxide, propane, butane, acetylene, compressed air, city gas, natural gas, nitrogen, nitrogen oxides, as well as all available refrigerants and can also be used with oxygen. • Propellent is pure compressed air, thus environmentally friendly

Item 70304

Volume ml

Unit piece

Price EURO

400

15.00

28 THOMAPLAST® III - 2015

THOMAPLAST®-Nuts made of PA 6.6 General product specification

• Good coefficient of sliding friction • High mechanical stability and fatigue strength • Excellent resilience, impact resistant • Resistant to abrasion, resistant to cold • Chemical features: Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines • Material specification of polyamide 6.6: The polyamides are universal materials for mechanical functional parts The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage Insulating properties and an amazingly high tensile strength PA can also be used in the food processing industry and in medical fields Resistant to corrosion and abrasion Non-toxic and unmagnetic Vibration-damping PA 6.6 features the same chemical resistance as PA 6 PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6 However, PA 6.6 is a little less impact resistant compared to PA 6

General technical specification

• Material: PA 6.6 (polyamide 6.6) • Density: 1.14 g/cm3 (DIN 53479) • Temperature range: -30 to +100 °C • Melting temperature: +255 °C (DIN 53736) • Yield stress: 83 N/mm2 (ISO 527) • Elongation at break: 30 % (DIN 53455) • Bending strength: 115 N/mm2 (DIN 53452) • Elastic modulus: 3,000 N/mm2 (DIN 53457) • Impact resistance (Charpy): without break (DIN 53453) • Notch impact strength (Izod): 60 J/m (ASTM D 256) • Coefficient of sliding friction against steel (dry): 0.35 – 0.42 • Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482) • Surface resistance: approx. 1014 Ohm (DIN 53482) • Comparative tracking index (CTI): >600 V (IEC 112) • Dielectric strength: approx. 40 kV/mm (DIN 53481) • Water absorption (saturation): approx. 8.5 % (DIN 53495) • Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

THOMAPLAST®-Hex Nut (DIN 934) made of PA

Fastening Elements

Nuts

Technical specification

Item

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 934, ISO 4034/4032, NFE 27411, NFE 24032

305818 305819 305821 305822 305824 305825 305826 305827

Item 309144 309145 309146 309147 301511 301512 301513 301514 301515 301516 301517 301518 301519 301520 301521 301522 309148 309149 309150 309151 309152 309153

Internal thread

H mm

WAF mm

Unit piece

Price EURO

M2 x 0.4 M2 x 0.4 M2.5 x 0.45 M2.5 x 0.45 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M16 x 2 M16 x 2 M20 x 2.5 M20 x 2.5

1.6 1.6 2 2 2.4 2.4 3.2 3.2 4.2 4.2 5 5 6.5 6.5 8 8 10.8 10.8 14.8 14.8 18 18

4 4 5 5 5.5 5.5 7 7 8 8 10 10 13 13 17 17 18 18 24 24 30 30

50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 10 20

36.00 62.00 36.00 62.00 24.00 40.00 24.00 40.00 24.00 40.00 24.00 40.00 29.00 49.00 32.00 54.00 32.00 54.00 50.00 84.00 50.00 84.00

Internal thread

h mm

WAF Unit (SW) mm piece

M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M16 x 2 M16 x 2

17 17 22 22 28 28 36 36

8 8 9.5 9.5 14.4 14.4 15.8 15.8

EURO

1.2 1.2 1.85 1.85 3 3 3.3 3.3

13 13 17 17 18.7 18.7 23.7 23.7

38.00 65.00 43.00 72.00 59.00 99.00 37.00 63.00

25 50 25 50 25 50 10 20

Price

THOMAPLAST®-Hex Lock Nut made of PA self-locking Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural

THOMAPLAST®-Hex Washer Faced Nut made of PA

Item

Product specification

• Nut and washer in one piece • Quick assembly • Suitable for awkward locations or automated assembly

338179 338180 338181 338182 338183 338184 338185 338186 338187 338188

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural

Internal thread

WAF

Unit

Price

piece

EURO

M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25

6.9 6.9 8.3 8.3 9.5 9.5 11.4 11.4 16.2 16.2

4.7 4.7 5.5 5.5 6.5 6.5 7.3 7.3 9 9

6 6 7 7 8 8 10 10 14 14

25 50 25 50 25 50 25 50 25 50

38.00 66.00 30.00 48.00 38.00 66.00 38.00 66.00 42.00 74.00

THOMAPLAST®-Hex Nut made of PA - flat Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black

Item

Internal thread

305809 305810 305812 305813 305815 305816

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1

8.8 8.8 9.8 9.8 13 13

3.8 3.8 5 5 6 6

1 1 1 1 0.95 0.95

WAF Unit (SW) mm piece 7 7 8 8 10 10

25 50 25 50 25 50

Price EURO 29.00 50.00 30.00 51.00 38.00 65.00

THOMAPLAST® III - 2015 29

Fastening Elements Item 305830 305831 305833 305834 305836 305837 305839 305840 305842 305843 332531 332532 305845 305846 305848 305849 305851 305852 305854 305855 305857 305858 305860 305861 305863 305864 305866 305867 305869 305870 305872 305873 305875 305876 305878 305879 305881 305882 305884 305885 305887 305888

Nuts

Internal thread

h mm

WAF mm

Unit piece

Price EURO

M6 x 0.75 M6 x 0.75 M8 x 0.75 M8 x 0.75 M8 x 1 M8 x 1 M10 x 0.75 M10 x 0.75 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M12 x 1 M12 x 1 M12 x 1 M12 x 1 M13 x 1 M13 x 1 M14 x 1 M14 x 1 M14 x 1.5 M14 x 1.5 M15 x 1 M15 x 1 M16 x 1 M16 x 1 M16 x 1.5 M16 x 1.5 M18 x 1 M18 x 1 M18 x 1.5 M18 x 1.5 M18 x 1.5 M18 x 1.5 M20 x 1.5 M20 x 1.5 M22 x 1 M22 x 1 M22 x 1.5 M22 x 1.5 M30 x 1.5 M30 x 1.5

2.3 2.3 2.5 2.5 4 4 2.5 2.5 3 3 6 6 5 5 4 4 7 7 5 5 4 4 3 3 4 4 4 4 4.3 4.3 4.5 4.5 4.5 4.5 8 8 4.5 4.5 4.3 4.3 5 5

8 8 12 12 13 13 14 14 13.8 13.8 13.9 13.9 16 16 17 17 17 17 22 22 22 22 18 18 24 24 19 19 24 24 24 24 25 25 27 27 25 25 25 25 36 36

50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

42.00 72.00 45.00 76.00 45.00 76.00 45.00 76.00 45.00 76.00 37.00 64.00 32.00 55.00 32.00 55.00 32.00 55.00 33.00 57.00 33.00 57.00 33.00 57.00 42.00 73.00 42.00 73.00 42.00 73.00 42.00 73.00 42.00 73.00 42.00 73.00 42.00 73.00 42.00 73.00 42.00 73.00

THOMAPLAST -Hex Nut made of PA - inch ®

30 THOMAPLAST® III - 2015

Technical specification

• Material: PA (polyamide) • Colour: light grey • Density: 1.10 g/cm3 • Temperature range: -20 to +60 °C, for a short time +80 °C Item 340186 340187 340188 340189 340190 340191

Internal thread

h mm

WAF mm

Unit piece

Price EURO

G 1/8“ G 1/4“ G 3/8“ G 1/2“ G 3/4“ G 1“

5 6 7 8 10 12

14 17 22 27 32 46

10 10 10 10 10 10

14.00 19.00 25.00 27.00 32.00 38.00

THOMAPLAST®-Hex Nut (DIN 934) made of PC Product specification

• Ideal fastening elements for optically sophisticated applications • Suitable for high stability and highest load • Can be used for signs, shelves, displays, technical parts • Inflame and extinguish after removal of the ignition source, burn smoking (smell of phenol) • Chemical features: Good resistance to most detergents and suds based on detergents; resistant to many organic acids, mineral acids of high concentration, oxidants and reducing agents, fats and oils, neutral and acidic salt solutions, aliphatic and cycloaliphatic hydrocarbons and alcohols, except methanol. • Material specification of polycarbonate: Crystal-clear, colourless and amorphous thermoplastic Suitable for use under the most extreme atmospheric conditions Polycarbonate is the most shatterproof glazing material today The impact strength is 250 times higher than that of glass of the same thickness The notch impact strength is 30 to 40 times higher than PMMA (acrylic glass) The excellent impact strength remains stable up to -40 °C High heat resistance Low creep Suitable for food Sterilizable, thus suitable for medical devices Although PC can be permanently cleaned in hot water and steam sterilized, a continuous use in water above +60 °C is not recommended, because the impact resistance is affected under these conditions. The transparency is 90 % at 1 mm thickness and 80 % at 10 mm; ultraviolet rays are almost completely absorbed.

Technical specification

Fastening Elements

Nuts

• Dielectric strength: 35 kV/mm (DIN 53481) • Volume resistivity: >1017 Ohm x cm (DIN 53482) • Surface resistance: >1015 Ohm (DIN 53482) • Comparative track. index (CTI): 255 - 300 (DIN 53480) • Dielectric constant: 2.9 at 1 MHz (DIN 53483) • Regulations: DIN 934, ISO 4032

Item 340397 340398 340399 340400

Internal thread

h mm

WAF mm

Unit piece

Price EURO

M12 x 1.75 M12 x 1.75 M16 x 2 M16 x 2

10.8 10.8 14.8 14.8

18 18 24 24

25 50 25 50

39.00 68.00 55.00 89.00

THOMAPLAST®-Hex Nut made of PP - inch Technical specification

• Material: PP (polypropylene) • Colour: grey • Density: 0.90 g/cm3 • Temperature range: +5 to +90 °C, for a short time +110 °C

Item 333065 333066 333067 333068 333069 333070

Internal thread

H mm

WAF mm

Unit piece

Price EURO

M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25

4.2 4.2 5 5 6.5 6.5

8 8 10 10 13 13

50 100 50 100 50 100

31.00 52.00 37.00 61.00 43.00 72.00

Technical specification

• Material: PP (polypropylene) • Colour: natural • Density: 0.90 g/cm3 • Temperature range: +5 to +90 °C, for a short time +110 °C • Regulatins: similar to NFE 2403, ISO 4032, DIN 555, DIN 934

340385 340386 340387 340388 340389 340390 340391 340392 340393 340394 340395 340396

340192 340193 340194 340195 340196 340197

Internal thread

h mm

WAF mm

Unit piece

Price EURO

G 1/8“ G 1/4“ G 3/8“ G 1/2“ G 3/4“ G 1“

5 6 7 8 10 12

14 17 22 27 32 46

10 10 10 10 10 10

14.00 19.00 25.00 27.00 32.00 38.00

THOMAPLAST®-Hex Nut (DIN 555) made of PVDF Product specification

THOMAPLAST®-Hex Nut (DIN 934) made of PP

Item

Internal thread

h mm

WAF mm

Unit piece

Price EURO

M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

2.4 2.4 3.2 3.2 4.2 4.2 5 5 6.5 6.5 8 8

5.5 5.5 7 7 8 8 10 10 13 13 17 17

25 50 25 50 25 50 25 50 25 50 25 50

16.00 29.00 18.00 33.00 21.00 38.00 23.00 42.00 27.00 49.00 36.00 57.00

• High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology. • Chemical features: Resistant to alcohols, fats and oils, alkalis, acids and halogens; limited resistance to oxidizing acids; poor resistance to ketones, amines, pyridine, dimethyl formamide, hot alkalis and fuming sulfuric acid. • Material specification: PVDF has similar properties than the related PTFE (temperature range -60 to +150 °C) PVDF is vastly superior to all other fluoropolymers concerning stability, stiffness and creep strength as well as resistance to high-energy radiation, but sliding and electrical insulating properties are a little weaker. Excellent resistance to UV, aging and weather Good abrasion resistance Good dielectric strength Good dimensional stability due to strong hardness High stability and impact resistance even at low temperatures Low dissipation factor Can not be solvent cemented Water resistant, flame resistant and self-extinguishing Physiologically safe Meets highest purity requirements

THOMAPLAST® III - 2015 31

Fastening Elements

Nuts

Technical specification

Item

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Density: 1.76 g/cm3 (DIN ISO/IEC 1183) • Temperature range: -40 to +150 °C, for a short time +160 °C • Melting point: +175 °C (ASTM 03418) • Elastic modulus: 2,500 MPa (ISO 527) • Yield stress: 57 N/mm2 (DIN 53455) • Tearing strength: 50 N/mm2 (DIN 53455) • Elongation at break: 12 % (DIN 53455) • Coefficient of sliding friction against steel (dry): approx. 0.20 - 0.35 • Water absorption: <0.04 % (ISO 62), storage in water • Shore hardness D: 79° (ASTM D2240) • Impact resistance: 300 - 450 kJ/m2 (DIN 53448) • Volume resistivity: 1013 Ohm x cm (IEC 60093) • Dielectric strength: 40 kV/mm (IEC 60093) • Regulations: similar to NFE 24032, ISO 4034, DIN 555 Item 335963 335964 335965 335966 335967 335968 335969 335970 335971 335972 335973 335974 335975 335976 335979 335980

340201 340202 340203

Internal thread

h mm

WAF mm

Unit piece

Price EURO

M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M16 x 2 M16 x 2

2.4 2.4 3.2 3.2 4.2 4.2 5 5 6.5 6.5 8 8 10.8 10.8 14.8 14.8

5.5 5.5 7 7 8 8 10 10 13 13 17 17 18 18 24 24

25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 25

22.00 38.00 22.00 38.00 22.00 38.00 22.00 38.00 22.00 38.00 34.00 58.00 34.00 58.00 30.00 62.00

• Material: PVDF (polyvinylidene fluoride) • Colour: natural • Density: 1.75 g/cm3 • Temperature range: -40 to +140 °C, for a short time +160 °C

Unit piece

Price EURO

G 1/2“ G 3/4“ G 1“

8 10 12

27 32 46

5 1 5

20.00 2.00 30.00

• Fastening elements made of PTFE are ideally suitable for constructions under highest thermal and chemical load. Very good coefficient of sliding friction, therefore no sticking. Elements made of PTFE hardly get dirty due to their excellent antiadhesive properties. • Very good chemical resistance • Very high temperature resistance • Suitable for food contact applications • Extremely resistant to UV and weather, even under extreme climatic conditions • Chemical features: Universal chemical resistance e.g. to fuming sulfuric and nitric acids except to molten or dissolved alkali metals, elementary fluorine, perfluorokerosene, chlorinetrifluoride as well as other fluorine compounds that attack the material at high pressures and temperatures. • Material specification: PTFE is a fluoroplast with excellent resistance to acids, alkalis, solvents and gases. Good electrical properties. Sterilizable and usable in a temperature range from -200 to +260 °C depending on the degree of mechanical load. No embrittlement, even when in contact with boiling helium (at -269 °C). Machinable but bondable only after pretreatment. Not resistant to fluorine compounds and molten alkali metals at higher temperatures.

Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: milky white • Density: 2.14 - 2.19 g/cm3 (DIN 53479) • Temperature range: -200 to +260 °C, for a short time +280 °C • Melting point: +327 °C • Elastic modulus: 400 - 800 N/mm2 (DIN 53457) • Yield stress: 10 N/mm2 (DIN 53455) • Tearing strength: 29 - 39 N/mm2 (DIN 53456) • Elongation at break: 200 - 500 % (DIN 53455) • Notch impact strength: 16 kJ/m2 (DIN 53453) • Coefficient of sliding friction against steel (dry): approx. 0.18 - 0.23 • Shore hardness D: 55° - 72° (DIN 53505) • Water absorption: <0.01 % • Volume resistivity: 1018 Ohm x cm (DIN 53482) • Surface resistance: 1017 Ohm (DIN 53482) • Dielectric constant: 2.1 at 50 Hz (DIN 53483) • Flammability rating: UL 94 V-0 • Regulations: similar to DIN 934, DIN EN ISO 4032; conforming to FDA

Internal thread

h mm

WAF mm

Unit piece

Price EURO

G 1/8“ G 1/4“ G 3/8“

5 6 7

14 17 22

5 5 5

10.00 12.00 16.00

32 THOMAPLAST® III - 2015

WAF mm

Product specification

Technical specification

340198 340199 340200

h mm

THOMAPLAST®-Hex Nut (DIN 934) made of PTFE

THOMAPLAST®-Hex Nut made of PVDF - inch

Item

Internal thread

Fastening Elements Item 310098 310099 310100 310101 310106 310107 310130 310131 310132 310133

Nuts

Internal thread

h mm

WAF mm

Unit piece

Price EURO

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

5 5 6 6 7.5 7.5 9 9 11 11

7 7 8 8 10 10 13 13 16 16

3 10 3 10 3 10 3 10 3 10

48.00 146.00 48.00 146.00 48.00 146.00 62.00 184.00 66.00 188.00

THOMAPLAST®-Hex Nut made of PTFE - inch Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Density: 2.20 g/cm3 • Temperature range: -200 to +150 °C, for a short time +180 °C

THOMASTABIL®-Square Nut made of Glass Fiber Reinforced Plastic GFRP Application area:

• Laboratory technology, electroplating technology, electrical engineering

Product specification:

• Self-extinguishing and halogen-free • Linear stress-strain behavior • Low weight • Electrically insulating • Chemical-resistant • Corrosion-resistant and weatherproof • UV-resistant • High economic efficiency • High stability • Metal-free, unmagnetic • Thermally insulating • Epoxy resins are compounds, which have one or more reactive epoxy and hydroxyl groups. In general, they are formed from bispherol A and epichlorohydrin by polyaddition and polycondensation, combined with subsequent curing. Epoxy resins are more resistant than polyester resins especially to alkalis and organic solvents.

Technical specification:

Item 340204 340205 340206 340207 340208 340209

Internal thread

h mm

WAF mm

Unit piece

Price EURO

G 1/8“ G 1/4“ G 3/8“ G 1/2“ G 3/4“ G 1“

5 6 7 8 10 12

14 17 22 27 32 46

5 5 5 5 5 5

24.00 28.00 36.00 44.00 58.00 64.00

THOMAPLAST®-Hex Nut made of PFA - inch Technical specification

• Material: PFA (perfluoralkoxy) • Colour: transparent • Density: 2.10 g/cm3 • Temperature range: -200 to +200 °C, for a short time +240 °C

Item 340210 340211 340212 340213 340214 340215

Internal thread

h mm

WAF mm

Unit piece

Price EURO

G 1/8“ G 1/4“ G 3/8“ G 1/2“ G 3/4“ G 1“

5 6 7 8 10 12

14 17 22 27 32 46

5 5 5 5 5 5

12.00 14.00 18.00 22.00 29.00 32.00

• Material: Resin: epoxy Reinforcing fibers: glass fibers • Design: ground • Color: natural • Density: 2 g/cm3 • Temperature range: -100 to +155 °C, for a short time +180 °C • Impact toughness (IZOD): 300 kJ/m2 • Interlaminar shear strength: 25 MPa • Volume resistivity: 1010 - 1015 Ohm * cm • Surface resistance: 1010 - 1015 Ohm • Breakdown strength: 5 - 10 kV/mm • Comparative tracking index (CTI): KA 3c / KB 500 / KC 600 • Dielectric constant: <5 • Coefficient of linear thermal expansion: 12 x 10-6 1/K • Thermal conductivity: 0.2 - 0.6 W/m*K • Specific heat capacity: 1.0 - 1.2 kJ/kg*K • Water absorption: 0.15 % • Dimensional stability by Martens method: +200 °C • Resistance to glow heat: level 2b • Elongation at break: 1.0 - 1.8 % • Barcol hardness: >40 • Fire class: B2, UL94 V-1, UL 94 V-0, DIN 5510 S4 SR2, ST2, ASTM E84 < 25, ASTM D635 All following measured values are depending on the test direction: parallel (II) or perpendicular (+) to the fibers. • Tensile strength: II: 250 MPa; +: 30 - 80 MPa • Tension stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 20 MPa (short-term); 15 MPa (long-term) • Bending strength: II: 250 MPa; +: 30 - 80 MPa • Bending stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 20 MPa (short-term); 15 MPa (long-term) • Elastic modulus tensile strength: II: 23,000 MPa; +: 8,000 MPa • Elastic modulus bending: II: 25,000 MPa; +: 9,000 MPa • Compressive strength: II: 450 MPa; +: 90 MPa • Compressive stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 25 MPa (short-term); 20 MPa (long-term) • Compressive modulus: II: 1,000 MPa; +: 4,000 MPa

THOMAPLAST® III - 2015 33

Fastening Elements

Item

Nuts

Internal thread

Unit piece

Price EURO

M8 x 1.25 M10 x 1.5 M12 x 1.75 M14 x 2 M16 x 2 M20 x 2.5

1 1 1 1 1 1

22.00 26.00 28.00 30.00 34.00 40.00

306525 306526 306527 306528 306529 306530

Item 305923 305924 305926 305927 305929 305930 305932 305933 306616 306617 306619 306620 306622 306623 306625 306626

THOMAPLAST®-Hex Cap Nut (DIN 917) made of PA - flat Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: similar to DIN 917

Internal thread

WAF (SW) mm

M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M16 x 2 M16 x 2

4.6 4.6 6 6 7.8 7.8 10.5 10.5 12.6 12.6 14.5 14.5 17 17 21.5 21.5

6 6 8 8 10 10 12 12 15 15 18 18 22 22 28 28

5.5 5.5 7 7 8 8 10 10 13 13 17 17 19 19 24 24

Unit

Price

piece

EURO

50 32.00 100 56.00 50 32.00 100 62.00 50 32.00 100 62.00 50 34.00 100 64.00 25 30.00 50 52.00 25 37.00 50 62.00 25 70.00 50 116.00 10 54.00 25 110.00

THOMAPLAST®-Slotted Nut-Plug made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black or white

Item 305911 305912 305913 305914 305916 305917 305919 305920

Internal thread

H mm

WAF (SW) mm

M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

5.2 5.2 6 6 8.3 8.3 10 10

piece

EURO

6.5 6.5 7.5 7.5 10 10 12.5 12.5

8 8 10 10 13 13 17 17

50 100 25 50 25 50 25 50

57.00 98.00 33.00 52.00 44.00 75.00 49.00 84.00

THOMAPLAST®-Hex Cap Nut (DIN 1587) made of PA - tall Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 1587, NFE 27453

34 THOMAPLAST® III - 2015

Unit

Price

Item

Internal thread

306038 M4 x 0.7 306039 M4 x 0.7 306040 M4 x 0.7 306041 M4 x 0.7 306042 M6 x 1 306043 M6 x 1 306044 M6 x 1 306045 M6 x 1 306046 M8 x 1.25

Colour

Unit

5 5 5 5 8 8 8 8 12

12 12 12 12 16 16 16 16 20

Price

piece

EURO

10 10 10 10 15.5 15.5 15.5 15.5 12

black black white white black black white white black

50 100 50 100 50 100 50 100 50

29.00 49.00 29.00 49.00 38.00 65.00 38.00 65.00 49.00

Fastening Elements Item 306047 306048 306049 306050 306051 306052 306053

Nuts

Internal thread

Colour

Unit

M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

12 12 12 15 15 15 15

20 20 20 22 22 22 22

Price

Item

12 12 12 12 12 12 12

black white white black black white white

piece

EURO

100 50 100 25 50 25 50

83.00 49.00 83.00 39.00 65.00 39.00 65.00

309158 309159 309160 309161 309164 309165 309166 309167 309168 309169 309170 309171 309172 309173 309174 309175 309176 309177 309178 309179

THOMAPLAST®-Star Grip Nut made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: white

Internal thread

Unit

Price

piece

EURO

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

18 18 18 18 18 18 21 21 18 18 18 18 21 21 21 21 21 21 21 21

32 32 32 32 32 32 42 42 55 55 32 32 42 42 62 62 42 42 62 62

18 18 18 18 18 18 28 28 30 30 18 18 28 28 34 34 28 28 34 34

10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20

26.00 44.00 26.00 44.00 26.00 44.00 38.00 70.00 48.00 77.00 27.00 46.00 36.00 58.00 60.00 95.00 40.00 64.00 62.00 102.00

THOMAPLAST®-Knurled Nut made of PA with Knurl Item

Unit

Internal thread

Price

piece

EURO

306738 306742 306744 306748

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8

12 12 12 12

8.3 8.3 8.3 8.3

50 100 50 100

60.00 96.00 60.00 96.00

Product specification

• Impact resistant, abrasion-proof and vibration-damping • Good sliding and emergency running properties • Form A (with fine knurl); Form B (star-shaped)

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: white • Temperature range: -30 to +100 °C

THOMAPLAST®-Knurled Nut made of PA Product specification

• Plastic knurled nuts made of shock-proof and impact-resistant polyamide • Universally usable in home and office • Possible applications: mounting of chair backs, height-adjustable floor lamps or height adjustment of other everyday objects

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black

Type A

Type B

THOMAPLAST® III - 2015 35

Fastening Elements Item

Nuts d1

Internal D thread mm

305938 305939 305940 305941 305942 305943 305944 305945 305946 305947 305948 305949 305950 305951 305952 305953 305954 305955 305956 305957 305958 305959 305960 305961 305962 305963 305964 305965 305966 305967 305968 305969 305970 305971 305972 305973 305974 305975 305976 305977 305978 305979 305980 305981 305982 305983 305984 305985 305986 305987 305988 305989 305990 305991 305992

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

8.5 8.5 7 7 7 7 8.5 8.5 10 10 10 10 9.5 9.5 9.5 9.5 10 10 10 10 8.8 8.8 10 10 10 10 9.5 9.5 9.5 9.5 10 10 10 10 13 13 10 10 10 10 10 10 9.5 9.5 9.5 9.5 10 10 10 10 13 13 10 10 13

3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6 6 5 5 3.5 3.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6 6 5 5 6 6 5.7 5.7 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6 6 5 5 6 6 5.7 5.7 6

5 5 7 7 7 7 5 5 6 6 6.5 6.5 8 8 8 8 7.5 7.5 6.5 6.5 7 7 6 6 6 6 8 8 8 8 7.5 7.5 6.5 6.5 11 11 7.5 7.5 6 6 6 6 8 8 8 8 7.5 7.5 6.5 6.5 11 11 7.5 7.5 11

A A A A A A A A A A B B A A B B A A B B A A A A B B A A B B A A B B A A B B A A B B A A B B A A B B A A B B B

12 12 12 12 12 12 14 14 16 16 16 16 16 16 16 16 20 20 20 20 14 14 16 16 16 16 16 16 16 16 19 19 20 20 20 20 24 24 16 16 16 16 16 16 16 16 19 19 20 20 20 20 24 24 24

36 THOMAPLAST® III - 2015

Type

Unit

Price

piece EURO 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 37.00 63.00 37.00 63.00 37.00 63.00 37.00 63.00 32.00 54.00 32.00 54.00 32.00 54.00 37.00 63.00 37.00 63.00 37.00 63.00 37.00 63.00 50.00 85.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 50.00 85.00 50.00 85.00 56.00

Item

Internal D thread mm

305993 M6 x 1 24 305994 M8 x 1.25 24 305995 M8 x 1.25 24

13 13 13

6 6 6

11 7.5 7.5

B A A

Type

Unit

Price

piece EURO 100 50 100

94.00 56.00 94.00

THOMAPLAST®-Knurled Nut made of PA - conical Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural

Item

Internal d thread mm

306008 306009 306010 306011 306012 306013

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1

13 13 13 13 13 13

16 16 16 16 16 16

1 1 1 1 1 1

14 14 14 14 14 14

Unit

mm piece 12 12 12 12 12 12

25 50 25 50 25 50

Price EURO 38.00 64.00 38.00 64.00 38.00 64.00

THOMAPLAST®-Wing Nut (DIN 315) made of PA with Round Wings Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 315

Item

Unit

Internal thread

Price

piece

EURO

306028 306029 306030 306031

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8

15 15 28.3 28.3

5 5 8.2 8.2

10 10 16 16

25 50 25 50

47.00 78.00 36.00 62.00

Fastening Elements Item 306032 306033 306034 306035 306036 306037

Nuts

Internal thread

Unit

Price

piece

EURO

M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

28.3 28.3 35.8 35.8 43.5 43.5

8.2 8.2 10 10 10 10

16 16 19.8 19.8 24.8 24.8

25 50 25 50 10 20

36.00 62.00 52.00 88.00 43.00 71.00

• Notch impact strength (Izod): 12 kJ/m2 (ISO 180/1A) • Melting point: +260 °C (ISO 11357) • Water absorption: 1.9 %; 6.0 % during storage in water (ISO 62) • Dielectric strength: 85 kV/mm (IEC 60243-1) • Volume resistivity: 1012 Ohm x m (IEC 60093)

THOMAPLAST®-Hex Washer Faced Nut made of PA glass fibre reinforced Product specification

• Nut and washer in one piece • Quick assembly • Suitable for awkward locations or automated assembly

THOMAPLAST®-Wing Nut made of PA with Narrow Wings

Technical specification

• Material: PA 6.6 (polyamide 6.6), glass fibre reinforced (25 %) • Colour: black

• Material: PA 6.6 (polyamide 6.6) • Colour: white

Item Item 306022 306023 306024 306025 306026 306027

Internal thread

Unit piece

Price EURO

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1

50 100 50 100 50 100

38.00 64.00 38.00 64.00 38.00 64.00

305890 M12 x 1 305891 M12 x 1 305893 M14 x 1 305894 M14 x 1 305896 M15 x 1 305897 M15 x 1 305899 M18 x 1.5 305900 M18 x 1.5 305902 M27 x 1 305903 M27 x 1

THOMAPLAST®-Nuts made of PA 6.6 – glass fiber reinforced General product specification

• Chemical features: Good resistance to mineral lubricants, aromatic and aliphatic hydrocarbons, gasoline, trichloroethylene, perchloroethylene, acetone and alcohols • Material specification: Dimensionally stable and impact resistant Suitable for heavy-duty and power transmission applications Glass fibre reinforced polyamides have excellent impact resistance combined with a high stiffness and strength Extremely robust to mechanical load • UV light and weather: medium resistance

Internal thread

H mm

WAF (SW) mm

18 18 20 20 20 20 25 25 34.5 34.5

1 1 1 1 1 1 1 1 1.5 1.5

Unit

Price

piece

EURO

4 4 4 4 4 4 6 6 6 6

15 15 17 17 17 17 22 22 30 30

25 50 25 50 25 50 25 50 25 50

42.00 71.00 42.00 71.00 42.00 71.00 42.00 71.00 42.00 71.00

THOMAPLAST®-Cap Nut with Coarse Knurl made of PA - glass fibre reinforced Technical specification

• Material: PA 6.6 (polyamide 6.6), glass fibre reinforced (25 %) • Colour: white

General technical specification

• Material: polyamide 6.6, glass fibre reinforced (25 %) • Density: 1.36 g/cm3 • Temperature range: -40 to +120 °C, for a short time +240 °C • Tensile strength: 170 / 120 MPa (dry / humid) (ISO 527) • Bending strength: 210 MPa (ISO 178) • Elongation at break: 4 % (ISO 527) • Elastic modulus: 7,000 MPa (ISO 527) • Impact resistance (Charpy): 75 kJ/m2 (ISO 179/1eU)

THOMAPLAST® III - 2015 37

Fastening Elements Item 306054 306055 306056 306057 306058 306059 306060 306061 306062 306063 306064 306065

Nuts

Internal thread

Unit

Price

piece

EURO

M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

8 8 10 10 13 13 12.5 12.5 17.5 17.5 21.5 21.5

3 3 4.2 4.2 5.2 5.2 6 6 8.3 8.3 10 10

4 4 5.5 5.5 6.5 6.5 7.5 7.5 10 10 12.5 12.5

50 100 50 100 25 50 25 50 25 50 25 50

48.00 82.00 48.00 82.00 30.00 51.00 30.00 51.00 44.00 74.00 44.00 74.00

THOMAPLAST®-Knurled Nut with Knurl made of PA glass fibre reinforced Technical specification

• Material: PA 6.6 (polyamide 6.6), glass fibre reinforced (25 %) • Colour: white

Metric Finishing Washers THOMAPLAST®-Metric Finishing Washers made of PA 6.6 General product specification

• Good coefficient of sliding friction • High mechanical stability and fatigue strength • Excellent resilience, impact resistant • Resistant to abrasion, resistant to cold • Chemical features: Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines. • Material specification of polyamide 6.6: The polyamides are universal materials for mechanical functional parts The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage Insulating properties and an amazingly high tensile strength PA can also be used in the food processing industry and in medical fields Resistant to corrosion and abrasion Non-toxic and unmagnetic Vibration-damping PA 6.6 features the same chemical resistance as PA 6 PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6 However, PA 6.6 is a little less impact resistant compared to PA 6

General technical specification

Item 305996 305997 305998 305999 306000 306001 306002 306003 306004 306005 306006 306007

Internal thread

Unit

Price

piece

EURO

M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

8 8 10 10 13 13 12.5 12.5 17.5 17.5 21.5 21.5

3.5 3.5 4.2 4.2 5.2 5.2 6 6 8.3 8.3 10 10

50 100 50 100 50 100 25 50 25 50 25 50

52.00 88.00 52.00 88.00 52.00 88.00 30.00 51.00 40.00 69.00 44.00 74.00

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Density: 1.14 g/cm3 (DIN 53479) • Temperature range: -30 to +100 °C • Melting temperature: +255 °C (DIN 53736) • Yield stress: 83 N/mm2 (ISO 527) • Elongation at break: 30 % (DIN 53455) • Bending strength: 115 N/mm2 (DIN 53452) • Elastic modulus: 3,000 N/mm2 (DIN 53457) • Impact resistance (Charpy): without break (DIN 53453) • Notch impact strength (Izod): 60 J/m (ASTM D 256) • Coefficient of sliding friction against steel (dry): 0.35 - 0.42 • Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482) • Surface resistance: approx. 1014 Ohm (DIN 53482) • Comparative track. index (CTI): >600 V (IEC 112) • Dielectric strength: approx. 40 kV/mm (DIN 53481) • Water absorption (saturation): approx. 8.5 % (DIN 53495) • Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

THOMAPLAST®-Metric Finishing Washer made of PA for Countersunk Head Screws - conical cross-section Product specification

• High-quality surface • Excellent protection from damage, good insulation effect • Developed for mounting of countersunk head screws • Protects sensitive materials, such as lacquer, enamel, glass, textiles, ceramics • Outstandingly suited for furniture industry, car body and apparatus construction, yacht construction

38 THOMAPLAST® III - 2015

Fastening Elements

Metric Finishing Washers

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black or natural

• Material: PA 6.6 (polyamide 6.6) • Colour: black or white

Item

Item 309032 309033 309034 309035 309036 309037 309038 309039 309040 309041 309042 309043 309044 309045 309046 309047

For thread

Colour

Unit

M3 M3 M3 M3 M4 M4 M4 M4 M5 M5 M5 M5 M6 M6 M6 M6

3 3 3 3 4.3 4.3 4.3 4.3 5.3 5.3 5.3 5.3 6.3 6.3 6.3 6.3

9.2 9.2 9.2 9.2 11.9 11.9 11.9 11.9 15.3 15.3 15.3 15.3 17 17 17 17

piece

EURO

1.9 1.9 1.9 1.9 3 3 3 3 3.5 3.5 3.5 3.5 4.5 4.5 4.5 4.5

nature nature black black nature nature black black nature nature black black nature nature black black

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

26.00 42.00 26.00 42.00 26.00 42.00 26.00 42.00 26.00 42.00 26.00 42.00 26.00 42.00 26.00 42.00

309072 309073 309074 309075 309076 309077 309078 309079 309080 309081 309082 309083 309084 309085 309086 309087

Price

THOMAPLAST®-Metric Finishing Washer made of PA for Countersunk Head Screws conical cross-section and retaining lips

For thread

Colour

Unit

M3 M3 M3 M3 M4 M4 M4 M4 M5 M5 M5 M5 M6 M6 M6 M6

3.2 3.2 3.2 3.2 4.3 4.3 4.3 4.3 5.2 5.2 5.2 5.2 6.4 6.4 6.4 6.4

14 14 14 14 16 16 16 16 18 18 18 18 22 22 22 22

Price

piece

EURO

2.9 2.9 2.9 2.9 3.5 3.5 3.5 3.5 3.8 3.8 3.8 3.8 4.5 4.5 4.5 4.5

white white black black white white black black white white black black white white black black

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

19.00 33.00 19.00 33.00 22.00 38.00 22.00 38.00 24.00 42.00 24.00 42.00 26.00 46.00 26.00 46.00

THOMAPLAST®-Metric Finishing Washer made of PA for Countersunk Head Screws rectangular cross-section and retaining lips Product specification

• With retaining lips for safe pre-assembly of screws. • Developed for mounting of countersunk head screws • Protect sensitive materials, such as lacquer, enamel, glass, textiles, ceramics • Outstandingly suited for furniture industry, car body and apparatus construction, yacht construction

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black or white

Product specification

• Due to retaining lips can be pre-assembled without any risk • High-quality surface • Excellent protection from damage • Good insulation effect • Developed for mounting of countersunk head screws • Protect sensitive materials, such as lacquer, enamel, glass, textiles, ceramics • Outstandingly suited for furniture industry, car body and apparatus construction, yacht construction

Item 309052 309053 309054 309055 309056 309057 309058

For thread

Colour

Unit

M3 M3 M3 M3 M4 M4 M4

3.2 3.2 3.2 3.2 4.3 4.3 4.3

8.4 8.4 8.4 8.4 10.5 10.5 10.5

Price

piece

EURO

2.2 2.2 2.2 2.2 2.8 2.8 2.8

white white black black white white black

50 100 50 100 50 100 50

22.00 38.00 22.00 38.00 22.00 38.00 22.00

THOMAPLAST® III - 2015 39

Fastening Elements Item 309059 309060 309061 309062 309063 309064 309065 309066 309067 309068 309069 309070 309071

Metric Finishing Washers

For thread

Colour

Unit

M4 M5 M5 M5 M5 M6 M6 M6 M6 M8 M8 M8 M8

4.3 5.2 5.2 5.2 5.2 6.2 6.2 6.2 6.2 8.2 8.2 8.2 8.2

10.5 12.5 12.5 12.5 12.5 15 15 15 15 20 20 20 20

Price

Item

2.8 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 5 5 5 5

black white white black black white white black black white white black black

piece

EURO

100 50 100 50 100 50 100 50 100 50 100 50 100

38.00 24.00 40.00 24.00 40.00 26.00 46.00 26.00 46.00 28.00 48.00 28.00 48.00

309099 309100 309101 309102 309103 309104 309105 309106 309107

THOMAPLAST®-Metric Finishing Washer made of PA for Cheese Head Screws - rectangular cross-section Product specification

• Developed for mounting of cheese head screws and the like of the following standards: DIN 85 (ISO 1580), DIN 96, DIN 7981 (ISO 7049), DIN 7971 (ISO 1481), DIN 7985 (ISO 7045), DIN 7971 (ISO 1481) and DIN 7996. • With retaining lips for safe pre-assembly of screws. • Protect sensitive materials, such as lacquer, enamel, glass, textiles, ceramics • Outstandingly suited for furniture industry, car body and apparatus construction, yacht construction

For thread

Colour

Unit

M5 M6 M6 M6 M6 M8 M8 M8 M8

5.3 6.4 6.4 6.4 6.4 8.4 8.4 8.4 8.4

12.7 13.9 13.9 13.9 13.9 20 20 20 20

Price

piece

EURO

3.4 3.3 3.3 3.3 3.3 5 5 5 5

black white white black black white white black black

100 50 100 50 100 50 100 50 100

34.00 29.00 51.00 29.00 51.00 38.00 62.00 38.00 62.00

THOMAPLAST®-Metric Finishing Washer made of PA for Cheese Head Screws rectangular cross-section and retaining lips Product specification

• Developed for mounting of cheese head screws and the like of the following standards: DIN 84 (ISO 1207), DIN 912 (ISO 4762), DIN 6912 and DIN 7984 • With retaining lips for safe pre-assembly of screws. • Protect sensitive materials, such as lacquer, enamel, glass, textiles, ceramics • Outstandingly suited for furniture industry, car body and apparatus construction, yacht construction

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black or white

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black or white

Item Item 309088 309089 309090 309091 309092 309093 309094 309095 309096 309097 309098

For thread

M3 M3 M3 M3 M4 M4 M4 M4 M5 M5 M5

3.2 3.2 3.2 3.2 4.3 4.3 4.3 4.3 5.3 5.3 5.3

8.5 8.5 8.5 8.5 10.5 10.5 10.5 10.5 12.7 12.7 12.7

40 THOMAPLAST® III - 2015

Colour

Unit

Price

piece

EURO

2.2 2.2 2.2 2.2 2.8 2.8 2.8 2.8 3.4 3.4 3.4

white white black black white white black black white white black

50 100 50 100 50 100 50 100 50 100 50

18.00 30.00 18.00 30.00 18.00 30.00 18.00 30.00 20.00 34.00 20.00

309108 309109 309110 309111 309112 309113 309114 309115 309116 309117 309118 309119 309120 309121 309122

For thread

Colour

Unit

M3 M3 M3 M3 M4 M4 M4 M4 M5 M5 M5 M5 M6 M6 M6

3.2 3.2 3.2 3.2 4.3 4.3 4.3 4.3 5.3 5.3 5.3 5.3 6.4 6.4 6.4

6.5 6.5 6.5 6.5 8.5 8.5 8.5 8.5 10.5 10.5 10.5 10.5 12.7 12.7 12.7

Price

piece

EURO

2 2 2 2 2.2 2.2 2.2 2.2 2.8 2.8 2.8 2.8 3.4 3.4 3.4

white white black black white white black black white white black black white white black

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

22.00 36.00 22.00 36.00 22.00 36.00 22.00 36.00 23.00 39.00 23.00 39.00 23.00 39.00 23.00

Fastening Elements Item 309123 309124 309125 309126 309127

Metric Finishing Washers

For thread

Colour

Unit

Price

piece

EURO

M6 M8 M8 M8 M8

6.4 8.4 8.4 8.4 8.4

12.7 15 15 15 15

3.4 4 4 4 4

black white white black black

100 25 50 25 50

39.00 26.00 44.00 26.00 44.00

THOMAPLAST®-Metric Finishing Washer made of PA for Cheese Head Screws conical cross-section and retaining lips Product specification

• High-quality surface • With retaining lips for safe pre-assembly of screws • Excellent protection from damage • Good insulation effect • Protect sensitive materials, such as lacquer, enamel, glass, textiles, ceramics • Outstandingly suited for furniture industry, car body and apparatus construction, yacht construction

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: black or white

Washers and Rings THOMAPLAST®-Washers and Rings made of PA 6 General product specification

• Universal washers or spacer rings • Ideal sliding rings between rotating parts • Insulate moisture and electricity • Absorb vibrations • Chemical features: Resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines; good resistance to weak alkalis, but only moderate resistance to strong alkalis; limited resistance to weak mineral and organic acids; not resistant to oxidizing acids, strong mineral and organic acids as well as phenols; limited resistance to hydrolysis • Material specification: Polyamide is an elastic, tough, loadable, but notch-sensitive material Impact resistant Resistant to abrasion and cold High fatigue strength and excellent resilience High wear resistance and good mechanical damping capacity Insulating properties and an amazingly high tensile strength Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage Polyamide can also be used in the food processing industry and in medical fields PA 6 features a higher impact resistance compared to PA 6.6 PA 6 has the highest water absorption of all common plastics up to 9 to 10 % (followed by PA 6.6 with 8 to 9 %), thus considerably increased toughness, flexibility and elongation. However, the strength of the material can therefore be reduced by up to 10%.

General technical specification

Item 309128 309129 309130 309131 309132 309133 309134 309135 309136 309137 309138 309139 309140 309141 309142 309143

For thread

Colour

Unit

M3 M3 M3 M3 M4 M4 M4 M4 M5 M5 M5 M5 M6 M6 M6 M6

3.2 3.2 3.2 3.2 4.3 4.3 4.3 4.3 5.3 5.3 5.3 5.3 6.4 6.4 6.4 6.4

14 14 14 14 16 16 16 16 18 18 18 18 22 22 22 22

Price

piece

EURO

2.8 2.8 2.8 2.8 3.5 3.5 3.5 3.5 4 4 4 4 4.9 4.9 4.9 4.9

white white black black white white black black white white black black white white black black

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

22.00 38.00 22.00 38.00 22.00 38.00 22.00 38.00 24.00 42.00 24.00 42.00 26.00 42.00 26.00 42.00

• Material: PA 6 (polyamide 6) • Colour: natural • Density: approx. 1.14 g/cm3 • Temperature range: -40 to +85 °C, for a short time +180 °C • Melting temperature: +220 °C (ISO 11357) • Yield stress: 75 MPa (ISO 527) • Elongation at break: >50 % (ISO 527) • Elastic modulus: 3,200 MPa (ISO 527) • Impact resistance: without break (DIN 53453) • Notch impact strength (Charpy): >3 kJ/m2 (ISO 179) • Ball pressure hardness: 160 N/mm2 (ISO 2039-1) • Shore hardness D: 82° (DIN 53505) • Dielectric strength: 20 kV/mm (IEC 60243) • Dielectric constant: 3.9 at 50 Hz (IEC 60250) • Surface resistance: 1013 Ohm (IEC 60093) • Volume resistivity: 1015 Ohm x cm (IEC 60093) • Comparative tracking index (CTI): >600 (DIN 53480) • Dielectric loss factor (at 50 Hz): 0.02 (specimen dry) • Water absorption: up to 10 % (during storage in water) (DIN 53472) • Flammability rating: UL 94 HB

THOMAPLAST®-Washers and Rings made of PP General product specification

• Resistant to corrosion, abrasion and to most chemicals • Extremely good impact toughness and notch impact strength • High surface hardness, resistant to hydrolysis • Insulating against moisture and electricity • This material should not be used at freezing temperatures, because of embrittlement at temperatures below 0 °C

THOMAPLAST® III - 2015 41

Fastening Elements • Chemical features: Good resistance to alcohols, ketones, alkalis and acids (except strong and oxidizing acids); resistant to fats and oils, including mineral oils and fuels. • Material specification: PP (polypropylene) is a universally usable standard plastic with excellent properties PP is sterilizable and has good electrical properties Weldable; bondable only after pretreatment PP is similar to PE (polyethylene), but more fat- and oil-resistant, and also features a higher hardness and stiffness than HDPE as well as a better resilience; its impact strength is, however, lower UV-radiation and weather: limited resistance

General technical specification

• Material: PP (polypropylene) • Colour: natural • Density: 0.90 g/cm3 (DIN 53479) • Temperature range: 0 to +100 °C • Elastic modulus: 1,350 N/mm2 (ISO 527) • Yield stress: 30 N/mm2 (ISO 527-1) • Tearing strength: 25 - 40 N/mm2 (DIN 53455) • Elongation at break: 70 % (DIN 53455) • Impact resistance: without break (DIN 53453) • Notch impact strength: 7 kJ/m2 (DIN 53453) • Ball pressure hardness: 70 N/mm2 (DIN 53456) • Coefficient of sliding friction against steel (dry): approx. 0.30 - 0.40 • Thermal conductivity: 0.22 W/mk (DIN 52612) • Shore hardness D: 70° (DIN 53505) • Volume resistivity: 1017 Ohm x cm (DIN 53482) • Surface resistance: 1013 Ohm (DIN 53482) • Dielectric constant: 2.27 at 50 Hz (DIN 53483)

THOMAPLAST®-Washers and Rings made of PVDF General product specification

• High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology. • Chemical features: Resistant to alcohols, fats and oils, alkalis, acids and halogens; limited resistance to oxidizing acids; poor resistance to ketones, amines, pyridine, dimethyl formamide, hot alkalis and fuming sulfuric acid. • Material specification: PVDF has similar properties than the related PTFE (temperature range -60 °C to +150 °C) PVDF is vastly superior to all other fluoropolymers concerning stability, stiffness and creep strength as well as resistance to high-energy radiation, but sliding and electrical insulating properties are a little weaker. Excellent resistance to UV, aging and weather Good abrasion resistance Good dielectric strength Good dimensional stability due to strong hardness High stability and impact resistance even at low temperatures Low dissipation factor Can not be solvent cemented Water resistant Flame resistant Self-extinguishing Physiologically safe Meets highest purity requirements

42 THOMAPLAST® III - 2015

Washers and Rings

General technical specification

THOMAPLAST®-Locking and Sealing Washer made of PA for M-Thread Product specification

• Proven screw retention and good screw sealing in all industries for use with standard screws and nuts. • Vibration- and noise-absorbing • Protection from corrosion and electrolytic effects • Protection of different surfaces including enamels and surface-treated materials • The retaining lips enter the thread pitch of the screw/nut when mounting the washers, thus packing all cavities between workpiece and screw head. The elastic material fits around the head of the screw/nut, ensuring additional screw/nut retention and sealing. • The washers have the best effect with single use and should be tightened with a wrench. In specific mounting cases, a short retightening after approx. 24 h is recommended. Electric and pneumatic screwdrivers can be used without problems. • Partly resistant to diluted chemicals including oils, petrol, benzene, lower alcohols, esters, ketones, ethers, chlorine, hydrocarbons, light alkalis and diluted organic acids.

Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

Item 308759 308760 308761 308762 308763

For d thread mm M3 M3 M4 M4 M5

d21

Unit

Price

piece

EURO

3.1 7 0.7 3.1 7 0.7 4.15 9 1.25 4.15 9 1.25 5.15 10.6 1.4

1.4 1.4 2.8 2.8 3.5

3.7 3.7 4.8 4.8 6

50 100 50 100 50

14.00 22.00 15.00 24.00 17.00

Fastening Elements Item 308764 308765 308766 308767 308768 308769 308770 308771 308772 308773 308774 308775 308776 308777 308778 308779 308780 308781 308782 308783 308784 308785 308786 308787 308788 308789 308790 308791 308792 308793 308794

For d thread mm

Washers and Rings D

d21

Unit

Price

Item

M5 5.15 10.6 M6 6.1 12 M6 6.1 12 M8 8.1 15.8 M8 8.1 15.8 M10 10 19.6 M10 10 19.6 M12 12 22 M12 12 22 M14 14 25.2 M14 14 25.2 M16 16.2 29.4 M16 16.2 29.4 M18 18.15 31.5 M18 18.15 31.5 M20 20.2 35.5 M20 20.2 35.5 M22 22.5 36 M22 22.5 36 M24 24.3 37.8 M24 24.3 37.8 M27 27.3 40 M27 27.3 40 M30 30.2 49.2 M30 30.2 49.2 M33 33.2 50.1 M33 33.2 50.1 M36 36.4 64.7 M36 36.4 64.7 M39 39.5 69.2 M39 39.5 69.2

1.4 1.6 1.6 2.1 2.1 2.1 2.1 2.2 2.2 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 2.5 2.5 3 3 3.1 3.1 3.2 3.2 3.4 3.4 3.8 3.8 3.8 3.8

3.5 4.2 4.2 4.6 4.6 5.3 5.3 5.5 5.5 5.5 5.5 6.2 6.2 6.9 6.9 6.9 6.9 6 6 7.9 7.9 7.9 7.9 9.3 9.3 9.5 9.5 11.8 11.8 10.7 10.7

6 7 7 9.2 9.2 11 11 13.2 13.2 14.8 14.8 17 17 19.2 19.2 21.3 21.3 23.3 23.3 25.2 25.2 28.1 28.1 31 31 34.2 34.2 37.2 37.2 40 40

piece

EURO

100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

32.00 20.00 36.00 26.00 44.00 32.00 54.00 24.00 40.00 34.00 58.00 40.00 70.00 46.00 76.00 54.00 80.00 55.00 83.00 64.00 92.00 62.00 104.00 66.00 115.00 74.00 123.00 88.00 144.00 126.00 188.00

recommended housing bore for screws: DIN 933, 84, 85; for nuts: DIN 1587, 934

For thread

d21

308800 308801 308802 308803 308804 308805 308806 308807 308808 308809 308810 308811 308812 308813 308814 308815 308816 308817 308818 308819 308820 308821 308822 308823 308824 308825 308826 308827 308828 308829 305814 305817 305820 305823

G 1/8“ G 1/8“ G 5/32“ G 5/32“ G 3/16“ G 3/16“ G 5/16“ G 5/16“ G 3/8“ G 3/8“ G 7/16“ G 7/16“ G 1/2“ G 1/2“ G 9/16“ G 9/16“ G 5/8“ G 5/8“ G 3/4“ G 3/4“ G 7/8“ G 7/8“ G 1“ G 1“ G 1 1/8“ G 1 1/8“ G 1 1/4“ G 1 1/4“ G 1 3/8“ G 1 3/8“ G 1 1/2“ G 1 1/2“ R 3/4“ R 3/4“

3.1 3.1 4.15 4.15 5.15 5.15 8.1 8.1 10 10 12 12 12.8 12.8 14 14 16.2 16.2 18.15 18.15 22.5 22.5 25.6 25.6 30.2 30.2 33.2 33.2 36.4 36.4 39.2 39.2 26.5 26.5

7 0.7 1.3 3.7 7 0.7 1.3 3.7 9 1.25 2.8 4.8 9 1.25 2.8 4.8 10.6 1.4 3.5 6 10.6 1.4 3.5 6 15.8 2.1 4.6 9.2 15.8 2.1 4.6 9.2 19.6 2.1 5.3 11 19.6 2.1 5.3 11 22 2.2 5.5 13.2 22 2.2 5.5 13.2 23 2.2 5.5 14 23 2.2 5.5 14 25.2 2.5 5.5 14.8 25.2 2.5 5.5 14.8 29.4 2.6 6.2 17 29.4 2.6 6.2 17 31.5 2.7 6.9 19.2 31.5 2.7 6.9 19.2 36 2.5 6.5 23.3 36 2.5 6.5 23.3 45 3 8 26.5 45 3 8 26.5 49.2 3.2 9.3 31 49.2 3.2 9.3 31 50.1 3.4 9.5 34.2 50.1 3.4 9.5 34.2 64.7 3.8 11.8 37.2 64.7 3.8 11.8 37.2 69 3.8 10.3 40 69 3.8 10.3 40 34 2 5.6 28 34 2 5.6 28

Unit

mm piece 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 20 25 50

THOMAPLAST®-Locking and Sealing Washer made of PA for Whitworth Thread

1 recommended housing bore for screws: DIN 933, 84, 85; for nuts: DIN 1587, 934

Technical specification

THOMAPLAST®-Double Locking and Sealing Washer made of PA

• Material: PA 6 (polyamide 6) • Colour: natural

Price EURO 14.00 22.00 15.00 24.00 17.00 32.00 26.00 44.00 32.00 54.00 24.00 40.00 27.00 45.00 34.00 58.00 41.00 69.00 56.00 94.00 54.00 88.00 70.00 116.00 70.00 116.00 74.00 122.00 88.00 144.00 51.00 76.00 69.00 117.00

THOMAPLAST® III - 2015 43

Fastening Elements

Washers and Rings

Product specification

• These washers are designed to keep screws and nuts tight and securely in position • Resistant to vibrations • The washers should be tightened with a wrench • In specific mounting cases, a short retightening after 24 h is advantageous • Electric or pneumatic screwdrivers can be used without problems • Best effect with single use

THOMAPLAST®-Anti-loss Washer made of PA for M-Thread

Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

Item 308830 308831 308832 308833 308834 308835 308836 308837 308838 308839 308840 308841 308842 308843 308844 308845 308846 308847 308848 308849 308850 308851 308854 308855

For thread

Unit

Price

piece

EURO

M2 M2 M2.5 M2.5 M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M14 M14 M16 M16 M20 M20

2.1 2.1 2.6 2.6 3.1 3.1 4.2 4.2 5.2 5.2 6.2 6.2 8.2 8.2 10.2 10.2 12.2 12.2 14.2 14.2 16.2 16.2 20.3 20.3

5 5 6 6 8 8 10 10 10.7 10.7 12.7 12.7 16.2 16.2 20 20 24 24 26 26 30 30 34 34

2 2 2.2 2.2 2.5 2.5 2.8 2.8 3 3 3.8 3.8 4.2 4.2 5 5 5.2 5.2 5.6 5.6 5.9 5.9 6.8 6.8

50 38.00 100 66.00 50 38.00 100 66.00 50 38.00 100 66.00 50 38.00 100 66.00 50 18.00 100 30.00 50 20.00 100 33.00 50 22.00 100 36.00 50 27.00 100 47.00 50 30.00 100 52.00 25 56.00 50 94.00 50 38.00 100 66.00 25 62.00 50 106.00

Item 306629 306630 306632 306633 306635 306636 306638 306639 306641 306642 306644 306645 1

For d thread mm M3.5 M3.5 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10

3.6 3.6 4.2 4.2 5 5 6.3 6.3 8.25 8.25 10.2 10.2

d11

Unit

Price

piece

EURO

9.15 9.15 9 9 10.1 10.1 12.5 12.5 16.2 16.2 15 15

1.2 2.7 1.2 2.7 1.4 3 1.4 3 1.65 3.1 1.65 3.1 1.3 2.75 1.3 2.75 1.65 3.5 1.65 3.5 2.1 4.3 2.1 4.3

4.2 4.2 4.4 4.4 5 5 6 6 8 8 10.5 10.5

50 100 50 100 50 100 50 100 50 100 50 100

14.00 22.00 14.00 22.00 14.00 22.00 20.00 32.00 24.00 42.00 30.00 48.00

recommended housing bore

THOMAPLAST®-Anti-loss Washer made of PA for WHITWORTH Pipe Thread

THOMAPLAST®-Anti-loss Washers made of PA General product specification

• These washers prevent the loss of bolts and screws (also tapping screws) during assembly and disassembly. • Ideal for securing screws in position without nuts • The lip acts as retaining element by entering the thread pitches and as gasket by packing of cavities between workpiece and screw head. • For use of screws, including tapping screws, as captive fastening element: The washer grips the thread when placed onto the screw (tapping screw) and is thus premounted and captive. • Protect surfaces of sensitive appliances • Resistant to vibration and most chemicals

General technical specification

• Material: PA 6 (polyamide 6) • Colour: natural • Temperature range: -40 to +85 °C, for a short time +180 °C

Item

d11

Unit

Price

For d thread mm

piece

EURO

306647 306648 306650 306651 306652 306653 306654 306655 306656 306657

R 1/8“ R 1/8“ R 1/4“ R 1/4“ R 3/8“ R 3/8“ R 3/8“ R 1/2“ R 1/2“ R 1/2“

15 2.1 15 2.1 18.9 2.6 18.9 2.6 23 2.15 23 2.15 23 2.15 27.6 2.1 27.6 2.1 27.6 2.1

4.3 4.3 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5

10.5 10.5 13.5 13.5 17 17 17 21 21 21

44 THOMAPLAST® III - 2015

10.2 10.2 13.2 13.2 17.7 17.7 17.7 21.5 21.5 21.5

recommended housing bore

50 30.00 100 48.00 50 30.00 100 48.00 25 30.00 50 54.00 100 92.00 25 38.00 50 72.00 100 122.00

Fastening Elements

Washers and Rings

THOMAPLAST®-Anti-loss Washer made of PA for Tapping Screws

• Material specification: PVC products usually feature quite a good resistance to media and weather, and are distinguished by their flame resistance. Good electrical insulation Low water absorption Good resistance to UV radiation Self-extinguishing High chemical resistance Can be bonded, welded and cutted Up to +40 °C rubbery-elastic, leather-like

Technical specification

Item

d mm

D mm

h mm

H mm

d11 mm

Unit piece

Price EURO

306659 306660 306662 306663 306665 306666

3.6 3.6 4.2 4.2 5 5

9 9 9 9 10.1 10.1

1.2 1.2 1.4 1.4 1.65 1.65

2.7 2.7 3 3 3.1 3.1

4.2 4.2 4.4 4.4 5 5

50 100 50 100 50 100

12.00 18.00 14.00 20.00 16.00 24.00

• Material: PVC soft (polyvinyl chloride) • Colour: natural • Density: 1.17 - 1.35 g/cm3 • Shore hardness A: 74° - 76° • Temperature range: -20 to +55 °C • Tensile strength: 16 - 20 N/mm2 • Elongation at break: 170 - 400 % • Surface resistance: approx. 1011 Ohm (DIN 53482) • Volume resistivity: >1011 Ohm x cm (DIN 53482) • Dielectric strength: 24 - 34 kV/mm (DIN 53481) • Dielectric constant: 4.2 - 8 at 50 Hz • Regulations: DIN 125, DIN 34815, ISO 7089

recommended housing bore

THOMAPLAST®-Flat Anti-loss Washer made of PA Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural • Thickness: 0.5 mm

Item

Item 306668 306669 306671 306672

For thread

d mm

D mm

Unit piece

Price EURO

M10 M10 M12 M12

8.4 8.4 9.8 9.8

20 20 20 20

50 100 50 100

18.00 30.00 18.00 30.00

THOMAPLAST®-Washer (DIN 125) made of plasticized PVC Product specification

301535 301536 301537 301538 301539 301540 301541 301542 301543 301544 301545 301546 306762 306763 306764 306765

For thread

Unit

Price

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M16 M16

3.2 3.2 4.2 4.2 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 13 13 17 17

7 7 9 9 11 11 12.5 12.5 17 17 21 21 24 24 30 30

0.5 0.5 0.8 0.8 1 1 1.5 1.5 2 2 2.5 2.5 2.5 2.5 3 3

100 200 100 200 100 200 100 200 50 100 50 100 50 100 25 50

27.00 45.00 27.00 45.00 29.00 48.00 29.00 48.00 22.00 42.00 24.00 44.00 26.00 46.00 26.00 42.00

• Chemical features: Good resistance to weak alkalis and acids as well as inorganic salt solutions; limited resistance to organic acids, mineral oils, fats and oils; not resistant to fuels, oxidizing and strong acids, ketones as well as aliphatic, aromatic and chlorinated hydrocarbons.

THOMAPLAST® III - 2015 45

Fastening Elements

Washers and Rings

THOMAPLAST®-Washer (DIN 125) made of rigid PVC

Item

Product specification

• Good electrical insulation • Low water absorption • High impact resistance • Good resistance to UV radiation • Self-extinguishing, flame-retardant • Chemical features: Very good resistance to weak and strong alkalis and acids (but only limited resistance to hydrofluoric acid) as well as mineral oils, fats, oils and aliphatic hydrocarbons; limited resistance to oxidizing and organic acids as well as fuels; not resistant to aromatic and chlorinated hydrocarbons, ketones and aldehydes; very good resistance to weather and direct sunlight. • Material specification: High mechanical stability, stiffness and hardness Resistant to aging and durable PVC products usually feature quite a good resistance to weather and direct sunlight Up to +80 °C rigid, up to +165 °C plasticized Rigid PVC can be bended, drilled, welded, bonded and painted High chemical resistance

306773 306774 306775 306776 306777 306778 306779 306780 306781

For thread

Unit

Price

piece

EURO

M6 M8 M8 M10 M10 M12 M12 M16 M16

6.4 8.4 8.4 10.5 10.5 13 13 17 17

12.5 17 17 21 21 24 24 30 30

1.5 1.5 1.5 2 2 2.5 2.5 3 3

100 50 100 50 100 50 100 25 50

22.00 24.00 40.00 28.00 50.00 46.00 80.00 32.00 56.00

THOMAPLAST®-Washer (DIN 125) made of HDPE Technical specification

• Material: HDPE (polyethylene, rigid, high density) • Colour: natural • Regulations: DIN 125, DIN 34815, ISO 7089

Technical specification

• Material: PVC rigid (polyvinyl chloride, rigid) • Colour: white • Density: 1.38 - 1.55 g/cm3 • Shore hardness D: 83° - 90° • Temperature range: from -5 to +75 °C, for a short time +100 °C • Elastic modulus: 3,000 MPa (ISO 527) • Tensile strength: 55 - 75 N/mm3 (DIN 53455) • Elongation at break: 10 - 20 % (DIN 53455) • Ball pressure hardness, 10-sec. value: 75 - 155 N/mm3 (DIN 53456) • Coefficient of sliding friction against steel (dry): approx. 0.6 (relative) • Surface resistance: 1013 Ohm (DIN 53482) • Volume resistivity: >1015 Ohm x cm (DIN 53482) • Dielectric strength: 40 - 50 kV/mm (DIN 53481) • Dielectric constant: 3.2 - 3.7 at 50 Hz • Regulations: DIN 125, DIN 34815, ISO 7089

Item 306706 306707 306708 306709 306710 306711 306712 306713 306714 306715 306716 306717 306718 306719 306720 306721

Item 306766 306767 306768 306769 306770 306771 306772

For thread

Unit

Price

piece

EURO

M3 M3 M4 M4 M5 M5 M6

3.2 3.2 4.3 4.3 5.3 5.3 6.4

7 7 9 9 10 10 12.5

0.5 0.5 1 1 1 1 1.5

50 100 50 100 50 100 50

8.00 12.00 8.00 12.00 8.00 12.00 14.00

46 THOMAPLAST® III - 2015

For thread

Unit

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M16 M16

3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 13 13 17 17

7 7 9 9 10 10 12.5 12.5 17 17 21 21 24 24 30 30

0.5 0.5 0.8 0.8 1 1 1.6 1.6 1.6 1.6 2 2 2.5 2.5 3 3

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

10.00 15.00 10.00 15.00 10.00 15.00 10.00 15.00 17.00 28.00 20.00 34.00 26.00 44.00 30.00 52.00

THOMAPLAST®-Washer (DIN 125) made of PA Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural • Regulations: DIN 125, DIN 34815, ISO 7089

Price

Fastening Elements

Washers and Rings Item

Item 305828 305829 305832 305835 305838 305841 308940 308941 308942 308943 305844 305847 301523 301524 305850 305853 301525 301526 301527 301528 308946 308947 301529 301530 308948 308949 308950 308951 301531 301532 308952 308953 301533 301534 305886 305889 308954 308955 305892 305895 308956 308957 308958 308959 305898

For thread

Unit

piece

EURO

M1.6 M1.6 M1.7 M1.7 M2 M2 M2.3 M2.3 M2.5 M2.5 M2.6 M2.6 M3 M3 M3.5 M3.5 M4 M4 M5 M5 M6 M6 M6 M6 M7 M7 M8 M8 M8 M8 M10 M10 M10 M10 M12 M12 M14 M14 M16 M16 M18 M18 M20 M20 M22

1.7 1.7 1.8 1.8 2.2 2.2 2.5 2.5 2.7 2.7 2.8 2.8 3.2 3.2 3.7 3.7 4.3 4.3 5.3 5.3 6.4 6.4 6.4 6.4 7.4 7.4 8.4 8.4 8.4 8.4 10.5 10.5 10.5 10.5 13 13 15 15 17 17 19 19 21 21 23

4 4 4.5 4.5 5 5 6 6 6 6 7 7 7 7 8 8 9 9 10 10 12 12 12.5 12.5 14 14 16 16 17 17 20 20 21 21 24 24 30 20 30 30 34 34 37 37 39

0.3 0.3 0.3 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1 1 1.6 1.6 1.6 1.6 1.5 1.5 1.6 1.6 1.6 1.6 2 2 2 2 2.5 2.5 3 3 3 3 3 3 3 3 3

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

24.00 40.00 24.00 40.00 6.00 10.00 6.00 10.00 6.00 10.00 8.00 14.00 6.00 10.00 8.00 14.00 8.00 14.00 8.00 14.00 8.00 14.00 8.00 14.00 8.00 14.00 9.00 16.00 10.00 18.00 10.00 18.00 11.00 19.00 22.00 38.00 30.00 52.00 36.00 60.00 36.00 60.00 38.00 74.00 42.00

305901 308960 308961 308962 308963 308964 308965 308966 308967

Price

For thread

Unit

Price

piece

EURO

M22 M24 M24 M26 M26 M27 M27 M30 M30

23 25 25 27 27 28 28 31 31

39 44 44 50 50 50 50 56 56

3 4 4 4 4 4 4 4 4

100 25 50 10 25 25 50 25 50

82.00 30.00 52.00 42.00 86.00 42.00 70.00 38.00 66.00

THOMAPLAST®-Washer (DIN 125) made of PP Product specification

• Universal washers or spacer rings • Absorb vibrations • Complete damping and distance keeping • Good resistance to stress cracking

Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 125, DIN 34815, ISO 7089

Item 337623 337624 337625 337626 337627 337628 337629 337630 337631 337632 337633 337634 337635 337636 337637 337638 337639 337640 337641 337642

For thread

Unit

Price

piece

EURO

M2.5 M2.5 M3 M3 M3.5 M3.5 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M14 M14

2.7 2.7 3.2 3.2 3.7 3.7 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 13 13 15 15

6 6 7 7 8 8 9 9 10 10 12.5 12.5 17 17 21 21 24 24 30 30

0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1 1 1.6 1.6 1.6 1.6 2 2 2.5 2.5 3 3

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 28.00 46.00

THOMAPLAST® III - 2015 47

Fastening Elements Item 337643 337644 337645 337646 337647 337648 337649 337650 337651 337652 337653 337654

Washers and Rings

For thread

Unit

Price

Item

M16 M16 M18 M18 M20 M20 M24 M24 M27 M27 M30 M30

17 17 19 19 21 21 25 25 28 28 31 31

30 30 34 34 37 37 44 44 50 50 56 56

3 3 3 3 3 3 4 4 4 4 4 4

piece

EURO

50 100 50 100 50 100 25 50 25 50 25 50

32.00 54.00 34.00 56.00 36.00 60.00 46.00 76.00 48.00 80.00 60.00 98.00

337584 337585 337586

THOMAPLAST®-Washer (DIN 125) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: similar to DIN 125

For thread

Unit

piece

EURO

M18 M20 M20

19 21 21

30 34 34

2.5 3 3

25 10 25

78.00 43.00 86.00

THOMAPLAST®-Washer (DIN 125) made of PTFE Product specification

• Fastening elements made of PTFE are ideally suitable for constructions under highest thermal and chemical load. Very good coefficient of sliding friction, therefore no sticking. Elements made of PTFE hardly get dirty due to their excellent antiadhesive properties. • Very good chemical resistance, very high temperature resistance • Suitable for food contact applications • Extremely resistant to UV and weather, even under extreme climatic conditions • Chemical features: Universal chemical resistance e.g. to fuming sulfuric and nitric acids, except to molten or dissolved alkali metals, elementary fluorine, perfluorokerosene, chlorinetrifluoride as well as other fluorine compounds that attack the material at high pressures and temperatures. • Material specification: PTFE is a fluoroplast with excellent resistance to acids, alkalis, solvents and gases. Good electrical properties. Sterilizable and usable in a temperature range from -200 to +260 °C depending on the degree of mechanical load. No embrittlement, even when in contact with boiling helium (-269 °C) Machinable but bondable only after pretreatment. Not resistant to fluorine compounds and molten alkali metals at higher temperatures.

Technical specification Item 301425 301426 337569 337570 301427 301428 337571 337572 301429 301430 337573 337574 301431 301432 337575 337576 337577 337578 337579 337580 337581 337582 337583

For thread

Unit

Price

piece

EURO

M4 M4 M5 M5 M5 M5 M6 M6 M6 M6 M8 M8 M8 M8 M10 M10 M12 M12 M14 M14 M16 M16 M18

4.3 4.3 5.3 5.3 5.3 5.3 6.4 6.4 6.4 6.4 8.4 8.4 8.4 8.4 10.5 10.5 13 13 15 15 17 17 19

9 9 9 9 10 10 12 12 12.5 12.5 16 16 17 17 20 20 24 24 24 24 30 30 30

0.8 0.8 0.8 0.8 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2 2 2.5 2.5 2.5 2.5 3 3 2.5

48 THOMAPLAST® III - 2015

25 19.00 50 33.00 50 38.00 100 62.00 25 25.00 50 43.00 50 50.00 100 72.00 25 35.00 50 65.00 50 64.00 100 104.00 25 41.00 50 76.00 50 80.00 100 132.00 25 52.00 50 83.00 10 30.00 25 60.00 10 35.00 25 70.00 10 39.00

Price

• Material: PTFE (polytetrafluoroethylene) • Colour: white • Density: 2.15 - 2.20 g/cm3 (DIN 53479) • Temperature range: -200 to +260 °C • Elastic modulus: 410 N/mm2 (DIN 53457) • Tensile strength: 22 - 30 N/mm2 (ASTM D) • Ball pressure hardness (10-sec. value): 27 - 35 N/mm2 (DIN 53453) • Elongation at break: 250 - 400 % (ASTM D) • Bending strength: 5 - 6 (ASTM D 790) • Notch impact strength: 16 kJ/m2 (DIN 53453) • Shore hardness D: 79° • Water absorption: 0.00 % (ASTM D 570) • Volume resistivity: >1018 Ohm x cm (DIN 53482) • Surface resistance: 1017 Ohm (DIN 53482) • Dielectric strength: 48 kV/mm (DIN 53481) • Flammability rating: UL 94 V-0 • Regulations: DIN 125, DIN 34815, ISO 7089

Fastening Elements Item 306722 306723 306724 306725 306726 306727 306728 306729 306730 306731 306732 306733 306734 306735 306736 306737

Washers and Rings

For thread

Unit

Price

Item

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M16 M16

3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 13 13 17 17

7 7 9 9 10 10 12 12 16 16 20 20 24 24 30 30

0.5 0.5 0.8 0.8 1 1 1.6 1.6 1.6 1.6 2 2 2.5 2.5 3 3

piece

EURO

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

20.00 30.00 28.00 46.00 33.00 57.00 28.00 48.00 36.00 60.00 48.00 82.00 58.00 104.00 162.00 110.00

309004 309005 309006 309007 309008 309009 309010 309011

For thread

Unit

Price

piece

EURO

M14 M14 M16 M16 M18 M18 M20 M20

15 15 17 17 19 19 21 21

24 24 28 28 30 30 34 34

2.5 2.5 2.5 2.5 3 3 3 3

25 50 25 50 25 50 25 50

32.00 54.00 40.00 66.00 40.00 66.00 48.00 78.00

THOMAPLAST®-Washer (DIN 433) made of PP Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 433

THOMAPLAST®-Washer (DIN 433) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 433, ISO 7092

Item

Item 308994 308995 336234 336235 308996 308997 308998 308999 309000 309001 306740 336913 336914 336233 309002 309003 336241 336242

For thread

Unit

Price

piece

EURO

M2 M2 M2.5 M2.5 M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12

2.2 2.2 2.7 2.7 3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 13 13

4.5 4.5 5 5 6 6 8 8 9 9 11 11 15 15 18 18 20 20

0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5 1 1 1.5 1.5 1.6 1.6 1.6 1.6 2 2

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

8.00 14.00 9.00 15.00 9.00 15.00 11.00 17.00 17.00 29.00 21.00 35.00 21.00 35.00 21.00 35.00 33.00 56.00

337537 337538 337539 337540 337541 337542 337543 337544 337545 337546 337547 337548 337549 337550 337551 337552 337553 337554 337555 337556 337557 337558

For thread

Unit

Price

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M14 M14 M16 M16 M18 M18 M20 M20

3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 13 13 15 15 17 17 19 19 21 21

6 6 8 8 9 9 11 11 15 15 18 18 20 20 24 24 28 28 30 30 34 34

0.5 0.5 0.5 0.5 1 1 1.6 1.6 1.6 1.6 1.6 1.6 2 2 2.5 2.5 2.5 2.5 2.5 2.5 3 3

50 100 50 100 50 100 50 100 50 100 50 100 25 50 10 25 10 25 10 25 10 25

24.00 40.00 24.00 40.00 28.00 46.00 40.00 66.00 40.00 66.00 48.00 80.00 76.00 128.00 76.00 128.00 82.00 138.00 82.00 138.00 82.00 138.00

THOMAPLAST® III - 2015 49

Fastening Elements

Washers and Rings

THOMAPLAST®-Washer (DIN 9021) made of plasticized PVC

THOMAPLAST®-Washer (DIN 9021) made of PA

Product specification

• Material: PA 6 (polyamide 6) • Colour: natural • Regulations: DIN 9021, ISO 7093, DIN 34816

Technical specification

• Chemical features: Good resistance to weak alkalis and acids as well as inorganic salt solutions; limited resistance to organic acids, mineral oils, fats and oils. • Material specification: PVC products usually feature quite a good resistance to media and weather, and are distinguished by their flame resistance. Low water absorption, good resistance to UV radiation Good electrical insulation Self-extinguishing PVC is not suitable for use with polar solvents due to its polar structure, therefore only limited resistance to hydrolysis. In contrast to rigid PVC, plasticized PVC is only moderately suitable for use with mineral oils and fats as well as aliphatic hydrocarbons (e.g. alcohols) due to the used plasticizers. Can be bonded, welded and cutted Up to +40 °C rubbery-elastic, leather-like

Item

Technical specification

306746 351030 309012 309013 309014 309015 309016 309017 309018 309019 309020 309021 336392 336393 309022 309023 309024 309025 306618 306621 309026 309027 309028 309029 309030 309031

Item 338295 338296 338297 338298 338299 338300 338301 338302 338303 338304 338305 338306 338307 338308

For thread

Unit

Price

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12

3.5 3.5 4.6 4.6 5.3 5.3 6.8 6.8 8.5 8.5 10.5 10.5 13 13

9 9 15 15 17 17 18 18 25 25 30 30 40 40

0.8 0.8 1.5 1.5 1.5 1.5 1.5 1.5 2.1 2.1 2.5 2.5 3 3

50 THOMAPLAST® III - 2015

50 20.00 100 30.00 50 22.00 100 38.00 50 34.00 100 56.00 50 38.00 100 62.00 50 66.00 100 114.00 50 80.00 100 136.00 25 56.00 50 98.00

For thread

Unit

piece

EURO

M2.5 M2.5 M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M8 M8 M10 M10 M12 M12 M12 M12 M14 M14 M18 M18 M20 M20

2.7 2.7 3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 8.4 8.4 10.5 10.5 13 13 13 13 15 15 20 20 22 22

8 8 9 9 12 12 15 15 18 18 24 24 25 25 30 30 37 37 40 40 44 44 56 56 60 60

0.8 0.8 0.8 0.8 1 1 1.2 1.2 1.6 1.6 2 2 2 2 2.5 2.5 3 3 3 3 3 3 4 4 4 4

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 10 25 10 25 10 25

38.00 46.00 6.00 10.00 7.00 12.00 10.00 16.00 14.00 24.00 20.00 32.00 22.00 36.00 32.00 54.00 24.00 40.00 33.00 57.00 24.00 54.00 25.00 55.00 30.00 66.00

THOMAPLAST®-Washer (DIN 9021) made of PP

Price

Fastening Elements

Washers and Rings

Technical specification

Item

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 9021 Item 337735 337736 337737 337738 337739 337740 337741 337742 337743 337744 337745 337746 337747 337748 337749 337750 337751 337752 337753 337754 337755 337756

For thread

Unit

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M14 M14 M16 M16 M18 M18 M20 M20

3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 13 13 15 15 17 17 20 20 22 22

9 9 12 12 15 15 18 18 24 24 30 30 37 37 44 44 50 50 56 56 60 60

0.8 0.8 1 1 1.2 1.2 1.6 1.6 2 2 2.5 2.5 3 3 3 3 3 3 4 4 4 4

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50

20.00 33.00 22.00 36.00 24.00 40.00 40.00 68.00 52.00 88.00 68.00 112.00 74.00 120.00 80.00 128.00 68.00 112.00 72.00 122.00 86.00 142.00

337771 337772 337773 337774 337775 337776 337777 337778 337779 337780

Price

For thread

Unit

Price

piece

EURO

M8 M8 M10 M10 M12 M12 M14 M14 M16 M16

8.4 8.4 10.5 10.5 13 13 15 15 17 17

24 24 30 30 37 37 44 44 50 50

2 2 2.5 2.5 3 3 3 3 3 3

25 50 25 50 25 50 25 50 25 50

56.00 98.00 104.00 158.00 138.00 204.00 172.00 248.00 188.00 266.00

THOMAPLAST®-Washer made of PA (Ø 2.2 - 20.5) Product specification

• Universal washers or spacer rings • Ideal sliding rings between rotating parts • Insulate moisture and electricity • Absorb vibrations • Resistant to corrosion and many chemicals

Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural • Regulations: NFE 27611, NFE 25513, NFE 25514

THOMAPLAST®-Washer (DIN 9021) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 9021

Item

Item 337763 337764 337765 337766 337767 337768 337769 337770

For thread

Unit

Price

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6

3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4

9 9 12 12 15 15 18 18

0.8 0.8 1 1 1.2 1.2 1.6 1.6

50 28.00 100 48.00 50 36.00 100 64.00 50 40.00 100 70.00 50 66.00 100 110.00

308968 308969 308970 308971 308972 308973 308974 308975 308978 308979 308984 308985 308986 308987 308992 308993 332975 332976 332977

For thread

Unit

Price

piece

EURO

M2 M2 M2.5 M2.5 M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M14

2.2 2.2 2.7 2.7 3.2 3.2 4.2 4.2 5.2 5.2 6.2 6.2 8.2 8.2 10.2 10.2 12.5 12.5 14.5

5 5 7 7 8 8 10 10 12 12 14 14 18 18 22 22 27 27 30

0.3 0.3 0.5 0.5 0.8 0.8 0.8 0.8 1 1 1 1 1.5 1.5 2 2 2.5 2.5 2.5

50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25

6.00 10.00 9.00 15.00 11.00 19.00 12.00 20.00 18.00 30.00 18.00 30.00 20.00 32.00 22.00 34.00 26.00 44.00 30.00

THOMAPLAST® III - 2015 51

Fastening Elements Item 332978 332979 332980 332981 332982 332983 332984

Washers and Rings

For thread

Unit

Price

piece

EURO

M14 M16 M16 M18 M18 M20 M20

14.5 16.5 16.5 18.5 18.5 20.5 20.5

30 32 32 36 36 40 40

2.5 3 3 3 3 3 3

50 25 50 25 50 25 50

51.00 36.00 62.00 56.00 78.00 59.00 82.00

Item

d mm

D mm

h mm

Unit piece

Price EURO

310640 310641 310642 310643 310644 310645 310646 310647 310648 310649 310650 310651 310652 310653 310654 310655 310656 310657 310658 310659 310660 310661 310662 310663 310664 310665 310666 310667 310668 310669 310672 310673

3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.7 3.7 3.7 3.7 3.7 3.7 3.9 3.9

8 8 8 8 9 9 9 9 10 10 10 10 15 15 6 6 6 6 6 6 8 8 14 14 8 8 12 12 12 12 12 12

1 1 1.5 1.5 1 1 1.5 1.5 0.5 0.5 1 1 1 1 0.5 0.5 1 1 2 2 2.5 2.5 1 1 0.5 0.5 0.8 0.8 1 1 1 1

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

27.00 47.00 27.00 47.00 27.00 47.00 30.00 52.00 30.00 52.00 30.00 52.00 37.00 63.00 30.00 52.00 30.00 52.00 30.00 52.00 30.00 52.00 30.00 52.00 30.00 52.00 30.00 52.00 30.00 52.00 30.00 52.00

THOMAPLAST®-Washer made of PA (Ø 1.1 - 3.9)

Item

d mm

D mm

h mm

Unit piece

Price EURO

310588 310589 310592 310593 310598 310599 310600 310601 310602 310603 310606 310607 310608 310609 310610 310611 310612 310613 310614 310615 310616 310617 310620 310621 310626 310627 310632 310633 310634 310635 310636 310637

1.1 1.1 1.5 1.5 1.9 1.9 1.9 1.9 2.2 2.2 2.2 2.2 2.5 2.5 2.5 2.5 2.5 2.5 2.6 2.6 2.7 2.7 2.7 2.7 2.8 2.8 3 3 3 3 3.2 3.2

2.5 2.5 3 3 4 4 5 5 4.5 4.5 5 5 7 7 8 8 10 10 5 5 5.5 5.5 6.5 6.5 7 7 13 13 13 13 7 7

0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.5 0.5 0.5 0.5 2.5 2.5 1 1 1 1 0.5 0.5 0.5 0.5 1 1 1 1 0.5 0.5 1 1 0.2 0.2

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

28.00 50.00 28.00 50.00 29.00 51.00 29.00 51.00 29.00 51.00 29.00 51.00 28.00 48.00 29.00 51.00 31.00 53.00 31.00 53.00 32.00 54.00 32.00 54.00 33.00 57.00 33.00 57.00 30.00 52.00 30.00 52.00

52 THOMAPLAST® III - 2015

THOMAPLAST®-Washer made of PA (Ø 4.0 - 5.8)

Item 305726 305729 310676 310677 310678 310679 310680 310681

d mm

D mm

h mm

Unit piece

Price EURO

4 4 4 4 4 4 4 4

7 7 7.5 7.5 8 8 8 8

1.5 1.5 1 1 0.8 0.8 1 1

50 100 50 100 50 100 50 100

40.00 68.00 40.00 72.00 40.00 72.00 40.00 72.00

Fastening Elements

Washers and Rings

Item

d mm

D mm

h mm

Unit piece

Price EURO

Item

d mm

D mm

h mm

Unit piece

Price EURO

310682 310683 310684 310685 310686 310687 310688 310689 310690 310691 310692 310693 310694 310695 310696 310697 310698 310699 310700 310701 310702 310703 310704 310705 310706 310707 310708 310709 310710 310711 310712 310713 310714 310715 310716 310717 310718 310719 310720 310721 310724 310725 310726 310727 310730 310731 310732 310733 310734 310735 310736 310737 310738 310739 310740 310741

4 4 4 4 4 4 4 4 4.2 4.2 4.2 4.2 4.2 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.5 4.5 4.5 4.5 4.6 4.6 4.6 4.6 4.7 4.7 4.8 4.8 4.8 4.8 4.8 4.8 5 5 5 5 5 5 5 5 5 5 5.1 5.1 5.2 5.2 5.2 5.2

9 9 10 10 10 10 12 12 8 8 8 8 10 10 9 9 9 9 10 10 12 12 18 18 10 10 15 15 10 10 15 15 10 10 10 10 10 10 12 12 10 10 10 10 12 12 18 18 18 18 11 11 9 9 12 12

1.5 1.5 1 1 2 2 1.5 1.5 1 1 1.2 1.2 1 1 1 1 1.5 1.5 1.2 1.2 1.5 1.5 1.5 1.5 1 1 1.5 1.5 2 2 1.5 1.5 1.5 1.5 0.8 0.8 1 1 0.8 0.8 1 1 1.5 1.5 1.5 1.5 1 1 1.5 1.5 2.5 2.5 1 1 1.2 1.2

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 50 100 50 100 50 100 50 100 50 100

30.00 52.00 30.00 52.00 30.00 52.00 30.00 52.00 26.00 48.00 35.00 61.00 26.00 48.00 18.00 32.00 20.00 34.00 34.00 60.00 24.00 38.00 54.00 92.00 36.00 60.00 20.00 34.00 37.00 62.00 37.00 63.00 24.00 40.00 26.00 46.00 28.00 48.00 30.00 50.00 30.00 52.00 36.00 68.00 32.00 52.00 37.00 63.00 42.00 72.00 40.00 68.00 25.00 43.00 28.00 48.00

310742 310743 310744 310745 310746 310747 310748 310749 310750 310751 310752 310753 310754 310755 310756 310757 310758 310759

5.2 5.2 5.3 5.3 5.3 5.3 5.3 5.3 5.5 5.5 5.5 5.5 5.8 5.8 5.8 5.8 5.8 5.8

13 13 11 11 11 11 15 15 15 15 40 40 9 9 12 12 12 12

1 1 1 1 1.5 1.5 1 1 1.5 1.5 1.5 1.5 1 1 1 1 1.5 1.5

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

30.00 52.00 22.00 38.00 30.00 52.00 34.00 56.00 33.00 57.00 32.00 62.00 30.00 52.00 30.00 52.00 23.00 37.00

THOMAPLAST®-Washer made of PA (Ø 6.0 - 6.5)

Item

d mm

D mm

h mm

Unit piece

Price EURO

310760 310761 310762 310763 310764 310765 310766 310767 310768 310769 310770 310771 310772 310773 310776 310777 310778 310779 310780 310781 310782 310783

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1

11 11 12 12 18 18 18 18 18 18 30 30 30 30 16 16 16 16 21 21 40 40

1 1 1 1 0.5 0.5 1 1 1.5 1.5 0.5 0.5 1 1 1 1 1.5 1.5 1 1 1 1

50 100 50 100 50 100 50 100 50 100 25 50 25 50 50 100 50 100 50 100 25 50

24.00 42.00 32.00 68.00 36.00 60.00 38.00 64.00 41.00 71.00 28.00 48.00 32.00 58.00 33.00 57.00 35.00 61.00 30.00 54.00 46.00 78.00

THOMAPLAST® III - 2015 53

Fastening Elements

Washers and Rings

Item

d mm

D mm

h mm

Unit piece

Price EURO

Item

d mm

D mm

h mm

Unit piece

Price EURO

310786 310787 310788 310789 310790 310791 310792 310793 310796 310797 310804 310805 310810 310811

6.2 6.2 6.2 6.2 6.3 6.3 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4

15 15 15 15 34.6 34.6 11 11 12 12 18 18 20 20

1 1 1.5 1.5 2.4 2.4 1 1 0.5 0.5 1 1 1 1

50 100 50 100 10 25 50 100 50 100 50 100 25 50

32.00 56.00 33.00 57.00 28.00 58.00 24.00 40.00 23.00 39.00 41.00 70.00 42.00 72.00

310868 310869 310870 310871 310876 310877 310878 310879 310882 310883 310894 310895

8.2 8.2 8.2 8.2 8.4 8.4 8.4 8.4 8.4 8.4 8.4 8.4

16 16 17 17 14 14 15 15 17 17 25 25

1 1 1 1 1.5 1.5 1 1 1 1 1.5 1.5

50 100 50 100 50 100 50 100 50 100 25 50

23.00 39.00 35.00 60.00 40.00 70.00 34.00 58.00 28.00 48.00 48.00 80.00

THOMAPLAST®-Washer made of PA (Ø 9.0 - 11.0)

THOMAPLAST -Washer made of PA (Ø 7.0 - 8.4) ®

Item

d mm

D mm

h mm

Unit piece

Price EURO

310828 310829 310830 310831 310832 310833 310844 310845 310846 310847 310848 310849 310852 310853 310854 310855 310856 310857 310858 310859 310860 310861 310864 310865 310866 310867

7 7 7 7 7 7 7.7 7.7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

11 11 11 11 16 16 12 12 10 10 10 10 12 12 12 12 14 14 14 14 20 20 30 30 30 30

0.5 0.5 1 1 1 1 2 2 0.5 0.5 1 1 1 1 1.5 1.5 0.5 0.5 1 1 1 1 0.5 0.5 1 1

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50

38.00 64.00 31.00 53.00 34.00 58.00 48.00 82.00 24.00 42.00 26.00 46.00 37.00 63.00 40.00 68.00 45.00 77.00 24.00 40.00 41.00 71.00 35.00 61.00 37.00 63.00

54 THOMAPLAST® III - 2015

Item

d mm

D mm

h mm

Unit piece

Price EURO

310902 310903 310904 310905 310912 310913 310914 310915 310918 310919 310920 310921 310922 310923 310924 310925 310926 310927 310928 310929 310932 310933 310934 310935 310936 310937 310938 310939

9 9 9 9 9.8 9.8 9.8 9.8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10.1 10.1 10.2 10.2 10.2 10.2

16 16 16 16 15 15 15 15 12 12 13 13 16 16 16 16 16 16 18 18 21 21 30 30 16 16 17 17

0.5 0.5 1 1 1 1 1.5 1.5 1 1 1 1 1 1 1.5 1.5 2 2 1 1 1 1 1.5 1.5 2 2 1 1

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 50 100 50 100

31.00 53.00 24.00 40.00 38.00 64.00 30.00 44.00 33.00 57.00 34.00 58.00 34.00 58.00 48.00 82.00 48.00 82.00 29.00 52.00 40.00 68.00 54.00 94.00 44.00 76.00 56.00 96.00

Fastening Elements

Washers and Rings

Item

d mm

D mm

h mm

Unit piece

Price EURO

Item

d mm

D mm

h mm

Unit piece

Price EURO

310944 310945 310950 310951 310960 310961 310962 310963 310966 310967 310968 310969 310970 310971

10.5 10.5 10.5 10.5 11 11 11 11 11 11 11 11 11 11

15 15 21 21 14 14 14 14 18 18 30 30 30 30

1 1 1 1 1.5 1.5 2 2 1 1 1 1 2 2

50 100 50 100 50 100 50 100 25 50 25 50 25 50

32.00 56.00 24.00 40.00 34.00 58.00 35.00 61.00 33.00 55.00 36.00 58.00 44.00 76.00

310986 310987 310990 310991 310994 310995

13 13 13 13 13.2 13.2

28 28 40 40 20 20

1 1 2 2 3 3

25 50 25 50 25 50

36.00 60.00 52.00 86.00 30.00 52.00

THOMAPLAST®-Washer made of PA (Ø 14.0 - 15.1)

THOMAPLAST®-Washer made of PA (Ø 12.2 - 13.2)

Item

d mm

D mm

h mm

Unit piece

Price EURO

311326 311327 311328 311329 311332 311333 311338 311339 311340 311341 311342 311343 311346 311347 311348 311349 311354 311355 311356 311357 311360 311361 310974 310975 310976 310977

12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.3 12.3 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.7 12.7 13 13 13 13

16.2 16.2 16.2 16.2 18 18 24 24 37 37 14 14 17 17 20 20 34 34 60 60 35 35 19 19 20 20

1 1 2.5 2.5 1 1 1 1 1 1 0.8 0.8 2 2 1 1 3 3 3 3 1.5 1.5 1.5 1.5 1 1

50 100 50 100 50 100 25 50 10 25 25 50 50 100 25 50 25 50 10 25 10 25 25 50 50 100

38.00 64.00 54.00 94.00 38.00 64.00 52.00 90.00 30.00 62.00 62.00 102.00 44.00 76.00 56.00 92.00 28.00 60.00 38.00 88.00 54.00 90.00 36.00 60.00 36.00 62.00

Item

d mm

D mm

h mm

Unit piece

Price EURO

310996 310997 311000 311001 311004 311005 311006 311007 311008 311009 311010 311011 311014 311015 311018 311019 311020 311021 311022 311023 311024 311025 311028 311029 311030 311031 311036 311037 311038 311039 311042 311043 311046 311047

14 14 14 14 14 14 14 14 14 14 14 14 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.8 14.8 15 15 15 15 15 15 15 15 15.1 15.1

18 18 18 18 20 20 24 24 24 24 25 25 20 20 21 21 25 25 25 25 25 25 45 45 18 18 25 25 25 25 28 28 28 28

0.5 0.5 1 1 1 1 1 1 1.5 1.5 1 1 3 3 2 2 1 1 3 3 4 4 2 2 1 1 1 1 2 2 2 2 2.5 2.5

50 100 50 100 50 100 50 100 25 50 10 25 50 100 50 100 25 50 50 100 25 50 25 50 50 100 25 50 25 50 25 50 25 50

22.00 38.00 22.00 38.00 42.00 74.00 44.00 76.00 34.00 56.00 24.00 52.00 54.00 94.00 51.00 87.00 49.00 83.00 58.00 99.00 48.00 80.00 53.00 90.00 46.00 78.00 34.00 52.00 34.00 52.00 38.00 64.00 42.00 70.00

THOMAPLAST® III - 2015 55

Fastening Elements

Washers and Rings

THOMAPLAST®-Washer made of PA (Ø 16.0 - 18.5)

Item

d mm

D mm

h mm

Unit piece

Price EURO

311048 311049 311052 311053 311054 311055 311058 311059 311062 311063 311064 311065 311076 311077 311088 311089 311092 311093 311094 311095 311096 311097 311102 311103 311106 311107 311108 311109 311110 311111

16 16 16 16 16 16 16 16 16.2 16.2 16.5 16.5 17 17 17.5 17.5 17.5 17.5 18 18 18 18 18 18 18 18 18 18 18.5 18.5

20 20 21 21 21 21 25 25 24 24 32 32 24 24 20 20 32 32 22 22 22 22 24 24 30 30 38 38 30 30

0.8 0.8 1 1 2 2 1 1 1 1 1 1 2 2 2 2 1.5 1.5 0.5 0.5 1 1 2 2 1 1 1 1 1.5 1.5

50 100 50 100 50 100 50 100 25 50 25 50 10 25 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50

45.00 77.00 42.00 70.00 53.00 90.00 44.00 74.00 58.00 96.00 36.00 66.00 26.00 60.00 48.00 82.00 43.00 73.00 42.00 72.00 44.00 76.00 33.00 57.00 40.00 68.00 32.00 52.00 54.00 90.00

THOMAPLAST®-Washer made of PA (Ø 20.0 - 21.0)

56 THOMAPLAST® III - 2015

Item

d mm

D mm

h mm

Unit piece

Price EURO

311128 311129 311130 311131 311136 311137 311142 311143 311146 311147 311148 311149 311164 311165

20 20 20 20 20 20 20 20 20.5 20.5 20.5 20.5 21 21

28 28 30 30 40 40 45 45 33 33 40 40 30 30

1 1 1 1 1 1 2 2 2 2 1.2 1.2 1.5 1.5

50 100 25 50 10 25 10 25 25 50 10 25 25 50

54.00 92.00 32.00 52.00 26.00 56.00 27.00 59.00 51.00 85.00 58.00 96.00 36.00 60.00

THOMAPLAST®-Washer made of PA (Ø 22.0 - 25.0)

Item

d mm

D mm

h mm

Unit piece

Price EURO

311172 311173 311176 311177 311178 311179 311180 311181 311186 311187 311188 311189 311202 311203 311206 311207 311208 311209 311212 311213 311214 311215 311224 311225 311226 311227

22 22 22 22 22 22 22.5 22.5 22.5 22.5 22.5 22.5 23 23 24 24 24.5 24.5 24.5 24.5 25 25 25 25 25 25

25.8 25.8 28.5 28.5 36 36 28 28 32 32 32 32 40 40 35 35 31 31 45 45 40 40 45 45 45 45

1 1 1.5 1.5 2 2 1 1 1 1 1.5 1.5 2.5 2.5 1.5 1.5 2 2 1.2 1.2 1 1 1.5 1.5 3.5 3.5

25 50 10 25 10 25 50 100 25 50 25 50 10 25 10 25 10 25 50 100 25 50 10 25 10 25

36.00 60.00 24.00 46.00 24.00 46.00 54.00 92.00 46.00 78.00 38.00 64.00 26.00 54.00 26.00 54.00 28.00 56.00 42.00 72.00 44.00 74.00 32.00 66.00 36.00 74.00

Fastening Elements

Washers and Rings

Item

d mm

D mm

h mm

Unit piece

Price EURO

311228 311229 311230 311231 311256 311257 311260 311261 311262 311263 311264 311265 311276 311277 311300 311301 311302 311303 311310 311311 311312 311313 311320 311321 311322 311323

25.5 25.5 26 26 27 27 27 27 28 28 28 28 30 30 32 32 32.5 32.5 34.2 34.2 35 35 45.5 45.5 50 50

36 36 32 32 33 33 37 37 40 40 40 40 46 46 56 56 38 38 45 45 40 40 53 53 61 61

1.5 1.5 1 1 1.5 1.5 2 2 6 6 9 9 1.5 1.5 3 3 2 2 1 1 1 1 2 2 1 1

25 50 50 100 25 50 25 50 10 25 10 25 10 25 10 25 25 50 25 50 25 50 10 25 10 25

42.00 70.00 42.00 70.00 42.00 72.00 48.00 82.00 25.00 61.00 34.00 68.00 32.00 62.00 26.00 58.00 40.00 70.00 44.00 76.00 39.00 67.00 28.00 56.00 26.00 54.00

• Volume resistivity: >1017 Ohm x cm (DIN 53482) • Dielectric strength: 65 - 70 kV/mm at 0.4 mm thickness • Dielectric constant: approx. 2.4 at 50 Hz • Water absorption: <0.1 % (ISO 62) • Flammability rating: UL 94 HB

THOMAPLAST®-Sealing Washer made of HDPE Technical specification

• Material: HDPE (polyethylene, rigid, high density) • Colour: natural

Item 308878 308879 308880 308881 308882 308883 308884 308885 308886 308887 308888 308889

THOMAPLAST®-Sealing Washers made of HDPE General product specification

• Excellent impact resistance, even at low temperatures • Good resistance to weather and aging • Antiadhesive, waxy and soft surface • High tearing strength • Physiologically safe • Good dielectrical properties • Chemical features: Good resistance to weak and strong alkalis and acids, except oxidizing acids, and only relatively suitable for hydrofluoric acid; resistant to organic acids, aliphatic hydrocarbons, greases and mineral oils, alcohols, ketones, esters and amines. • Material specification: Very low tendency to swell when in contact with polar fluids (e.g. alcohols, organic acids, esters, ketones etc.) as well as greases, oils and waxes. Resistance to weather: the material degrades when exposed to direct sunlight

General technical specification

For thread

Unit

Price

piece

EURO

M8 M8 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12

8 8 10 10 10.5 10.5 10.5 10.5 13.5 13.5 13.5 13.5

40 40 40 40 22 22 30 30 24 24 52 52

2 2 2 2 2 2 2 2 2.5 2.5 2 2

25 50 25 50 25 50 25 50 25 50 25 50

36.00 60.00 36.00 60.00 18.00 28.00 22.00 36.00 22.00 36.00 52.00 92.00

THOMAPLAST®-Washer made of HDPE with retaining lips Product specification

• The retaining lips serve for safe pre-assembly of screws and nuts with no risk of loss. • This facilitates considerably the pre-assembly at difficult accessible locations and thus allows saving of time.

Technical specification

• Material: HDPE (polyethylene, rigid, high density) • Colour: natural

• Material: HDPE (polyethylene, rigid, high density) • Density: 0.95 g/cm3 • Temperature range: -50 to +85 °C, for a short time +100 °C • Elastic modulus: 700 - 1,400 N/mm2 • Tensile strength: 18 - 35 N/mm2 • Tearing strength: 25 - 32 MPa (DIN 53455) • Elongation at break: 100 - 1,000 % (DIN 53455) • Ball pressure hardness: 35 - 55 N/mm2 (DIN 53456) • Impact resistance: +20 °C: without break (DIN 53453); -40 °C: approx. 350 kJ/m2 (DIN 53448) • Surface resistance: 1014 Ohm (DIN 53482)

THOMAPLAST® III - 2015 57

Fastening Elements Item 308890 308891 308892 308893 308894 308895 308896 308897 308898 308899 308900 308901 308902 308903

Washers and Rings

For thread

Unit

Price

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M10 M10

3.2 3.2 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 10.5 10.5 10.5

6 6 8 8 10 10 12.5 12.5 17 17 21 21 30 30

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

50 100 50 100 50 100 50 100 50 100 50 100 50 100

26.00 44.00 26.00 44.00 26.00 44.00 28.00 48.00 30.00 52.00 32.00 56.00 38.00 66.00

THOMAPLAST®-Locating Washer made of HDPE Product specification

• For colour coding of movable machine and apparatus parts that require lubrication

Item

d mm

D mm

h mm

306801 306802 306803 306804 306805 306806 306807 306808 306809 306810 306811

10.5 10.5 10.5 10.5 10.5 13 13 13 13 13 13

15 15 15 15 15 24 24 24 24 24 24

2 2 2 2 2 2 2 2 2 2 2

Colour Lubrication Unit piece

Price EURO

red yellow yellow blue blue red red yellow yellow blue blue

46.00 26.00 46.00 26.00 46.00 28.00 48.00 28.00 48.00 28.00 48.00

daily weekly weekly monthly monthly daily daily weekly weekly monthly monthly

100 50 100 50 100 50 100 50 100 50 100

THOMAPLAST®-Holding Washer made of PA Product specification

• For locking of countersunk head screws • Absorb vibrations caused by motor-driven appliances • Prevent the formation of local elements and resulting corrosion • Usually used in the lighting and electrotechnical industry

Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

Technical specification

• Material: HDPE (polyethylene, rigid, high density) • Colour: red, yellow or blue

Item Item

d mm

D mm

h mm

Colour Lubrication Unit piece

Price EURO

306782 306783 306784 306785 306786 306787 306788 306789 306790 306791 306792 306793 306794 306795 306796 306797 306798 306799 306800

6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 8.4 8.4 8.4 8.4 8.4 8.4 10.5

12.5 12.5 12.5 12.5 12.5 12.5 15 15 15 15 15 15 17 17 17 17 17 17 15

1.6 1.6 1.6 1.6 1.6 1.6 2 2 2 2 2 2 2 2 2 2 2 2 2

red red yellow yellow blue blue red red yellow yellow blue blue red red yellow yellow blue blue red

15.00 25.00 15.00 25.00 15.00 25.00 18.00 32.00 18.00 32.00 18.00 32.00 20.00 36.00 20.00 36.00 20.00 36.00 26.00

58 THOMAPLAST® III - 2015

daily daily weekly weekly monthly monthly daily daily weekly weekly monthly monthly daily daily weekly weekly monthly monthly daily

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

306694 306695 306696 306697 306698 306699 306700 306701 306702 306703

For thread

Unit

Price

piece

EURO

M3 M3 M4 M4 M5 M5 M6 M6 M8 M8

2.4 2.4 3.4 3.4 4.5 4.5 5.5 5.5 7 7

7 7 9 9 10 10 12.5 12.5 16 16

3.9 3.9 5 5 7 7 9 9 11 11

1 1 1 1 1 1 1.5 1.5 1.5 1.5

50 100 50 100 50 100 50 100 50 100

20.00 38.00 24.00 40.00 26.00 42.00 28.00 46.00 34.00 58.00

THOMAPLAST®-Insulating Washers made of PA conical Product specification

Fastening Elements

Washers and Rings

Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

Item

d mm

d1 mm

D mm

h mm

Unit piece

Price EURO

306680 306681 306683 306684 306686 306687 306689 306690 306692 306693

4.5 4.5 5.3 5.3 7 7 9 9 11 11

5 5 6 6 8 8 10 10 12 12

9 9 11 11 13 13 16 16 19 19

2.5 2.5 3 3 3 3 3.5 3.5 4 4

25 50 25 50 25 50 25 50 25 50

18.00 30.00 20.00 33.00 22.00 36.00 24.00 40.00 28.00 48.00

Item 308918 308919 308920 308921 308922 308923 308924 308925 308926 308927 308928 308929

For d1 thread mm M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12

Price

THOMAPLAST®-Retaining Ring made of POM

piece

EURO

Product specification

50 100 50 100 50 100 50 100 50 100 50 100

28.00 48.00 28.00 48.00 28.00 48.00 23.00 50.00 28.00 52.00 30.00 54.00

Unit

4.1 5.9 10.4 4.1 5.9 10.4 5.1 6.9 12.4 5.1 6.9 12.4 6.1 7.9 14.4 6.1 7.9 14.4 8.1 9.9 18.6 8.1 9.9 18.6 10.1 11.9 22.8 10.1 11.9 22.8 12.1 13 20.8 12.1 13 20.8

4.3 4.3 4.5 4.5 5 5 6 6 7 7 8.5 8.5

2.3 2.3 2.8 2.8 3.3 3.3 4.4 4.4 5.5 5.5 6.6 6.6

THOMAPLAST®-Clip made of PA Product specification

• For fixation of objects on smooth shafts and rods • Keep light objects such as paper rolls, conveyor rolls or small wheels positioned • Manually movable and adjustable • Good insulation effect

Technical specification

• Retaining rings for shafts and axes with available nut • Rings with mounting lip for easy assembly and disassembly • Absorption of axial forces possible • Work like anti-friction washers • Chemical features: Well suited for solvents, petrol, mineral oils and fats, alcohols and hydraulic fluids; resistant to weak acids and alkalis • Material properties: POM features an interesting combination of strong hardness with dimensional stability and nevertheless high impact resistance Shatter-proof High toughness and hardness even at low temperatures Very high resilience Good resistance to stress cracking Very good sliding and wear behavior, low friction values and good abrasion resistance High fatigue strength with changing stress conditions High dimensional stability under heat Low water absorption Very high dimensional stability, thus preferred material for precision, machine and apparatus construction; suitable for narrow tolerances Good electrical properties Approved for food Weldable; bondable only after pretreatment

Technical specification

• Material: PA 6 (polyamide 6) • Colour: red

Item

d mm

d1 mm

D mm

h mm

Unit piece

Price EURO

306674 306675 306677 306678

2.5 2.5 3.5 3.5

3 3 4 4

6 6 7.5 7.5

2 2 2.5 2.5

25 50 25 50

16.00 28.00 18.00 30.00

• Material: POM (polyoxymethylene) • Colour: black • Density: 1.41 g/cm3 (DIN 53479) • Temperature range: -60 to +110 °C, for a short time +140 °C • Elastic modulus: 3,000 N/mm2 (DIN 53457) • Tensile strength: 70 N/mm2 (DIN 53455) • Elongation at break: 40 % (ISO 527) • Bending stress: 3,000 N/mm2 • Rockwell hardness R: M 86 • Ball pressure hardness (30 s): 174 MPa (ISO 2039-1) • Notch impact strength: 7 - 8 kJ/m2 (DIN 53453) • Water absorption: 0.7 % (10 d, +25 °C) • Coefficient of thermal conductivity: 0.37 W/m x K (DIN 52612) • Flammability rating: UL 94 HB • Oxygen index: 15 % (ASTM D 2863) • Dielectric strength: approx. 30 kV/mm at 1.5 mm thickness (DIN 53481) • Volume resistivity: 1015 - 1017 Ohm x cm (DIN 53482) • Surface resistance: approx. 1015 Ohm (DIN 53482)

THOMAPLAST® III - 2015 59

Fastening Elements

Screws

General technical specification

Item

d mm

D mm

g mm

h mm

H mm

Unit piece

Price EURO

308904 308905 308906 308907 308908 308909 308910 308911 308912 308913 308914 308915 308916 308917

2.3 2.3 3.2 3.2 4 4 5 5 7 7 9 9 12 12

6 6 7 7 9 9 11 11 14 14 18.5 18.5 23 23

3-4 3-4 4-5 4-5 5-7 5-7 6-8 6-8 8 - 11 8 - 11 10 - 14 10 - 14 13 - 18 13 - 18

1 1 1 1 1.1 1.1 1.1 1.1 1.3 1.3 1.4 1.4 1.6 1.6

1.05 1.05 1.05 1.05 1.15 1.15 1.15 1.15 1.35 1.35 1.5 1.5 1.7 1.7

50 100 50 100 50 100 50 100 25 50 25 50 25 50

20.00 32.00 20.00 32.00 22.00 36.00 22.00 36.00 24.00 42.00 24.00 42.00 28.00 48.00

Screws THOMAPLAST®-Screws made of PA 6.6 General product specification

• Good coefficient of sliding friction • High mechanical stability and fatigue strength • Excellent resilience • Impact resistant • Resistant to abrasion • Resistant to cold • Chemical features: Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines. • Material specification of polyamide 6.6: The polyamides are universal materials for mechanical functional parts The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage Insulating properties and an amazingly high tensile strength PA can also be used in the food processing industry and in medical fields Resistant to corrosion and abrasion Non-toxic and unmagnetic Vibration-damping PA 6.6 features the same chemical resistance as PA 6 PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6 However, PA 6.6 is a little less impact resistant compared to PA 6

60 THOMAPLAST® III - 2015

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Density: 1.14 g/cm3 (DIN 53479) • Temperature range: -30 to +100 °C • Melting temperature: +255 °C (DIN 53736) • Yield stress: 83 N/mm2 (ISO 527) • Elongation at break: 30 % (DIN 53455) • Bending strength: 115 N/mm2 (DIN 53452) • Elastic modulus: 3,000 N/mm2 (DIN 53457) • Impact resistance (Charpy): without break (DIN 53453) • Notch impact strength (Izod): 60 J/m (ASTM D 256) • Coefficient of sliding friction against steel (dry): 0.35 - 0.42 • Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483) • Volume resistivity: 1015 Ohm x cm (DIN 53482) • Surface resistance: approx. 1014 Ohm (DIN 53482) • Comparative tracking index (CTI): >600 V (IEC 112) • Dielectric strength: approx. 40 kV/mm (DIN 53481) • Water absorption (saturation): approx. 8.5 % (DIN 53495) • Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

THOMAPLAST®-Screws made of PP General product specification

• Resistant to corrosion, abrasion and to most chemicals • Extremely good impact toughness and notch impact strength • High surface hardness • Resistant to hydrolysis • Insulating against moisture and electricity • This material should not be used at freezing temperatures, because of embrittlement at temperatures below 0 °C • Chemical features: Good resistance to alcohols, ketones, alkalis and acids (except strong and oxidizing acids); resistant to fats and oils, including mineral oils and fuels. • Material specification: PP (polypropylene) is a universally usable standard plastic with excellent properties PP is sterilizable and has good electrical properties Weldable; bondable only after pretreatment PP is similar to PE (polyethylene), but more fat- and oil-resistant, and also features a higher hardness and stiffness than HDPE as well as a better resilience; its impact strength is, however, lower UV radiation and weather: limited resistance

General technical specification

Fastening Elements

Screws

THOMAPLAST®-Screws made of PVDF

• Chemical features: Universal chemical resistance e.g. to fuming sulfuric and nitric acids, except to molten or dissolved alkali metals, elementary fluorine, perfluorokerosene, chlorinetrifluoride as well as other fluorine compounds that attack the material at high pressures and temperatures. • Material specification: PTFE (polytetrafluoroethylene) is a fluoroplast with excellent resistance to acids, alkalis, solvents and gases. PTFE has good electrical properties. PTFE is sterilizable and usable in a temperature range from -200 to +260 °C depending on the degree of mechanical load. No embrittlement, even when in contact with boiling helium (-269 °C). PTFE is machinable but bondable only after pretreatment. PTFE is not resistant to fluorine compounds and molten alkali metals at higher temperatures.

General product specification

• High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology. • Chemical features: Resistant to alcohols, fats and oils, alkalis, acids and halogens; limited resistance to oxidizing acids; poor resistance to ketones, amines, pyridine, dimethyl formamide, hot alkalis and fuming sulfuric acid. • Material specification: PVDF has similar properties than the related PTFE (temperature range -60 °C to +150 °C) PVDF is vastly superior to all other fluoropolymers concerning stability, stiffness and creep strength as well as resistance to high-energy radiation, but sliding and electrical insulating properties are a little weaker. Excellent resistance to UV, aging and weather Good abrasion resistance Good dielectric strength Good dimensional stability due to strong hardness High stability and impact resistance even at low temperatures Low dissipation factor Can not be solvent cemented Water resistant Flame resistant Self-extinguishing Physiologically safe Meets highest purity requirements

General technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: opaque white • Density: 2.14 – 2.19 g/cm3 (DIN 53479) • Temperature range: -200 to +260 °C, for a short time +280 °C • Melting point: +327 °C • Elastic modulus: 400 - 800 N/mm2 (DIN 53457) • Yield stress: 10 N/mm2 (DIN 53455) • Tearing strength: 29 - 39 N/mm2 (DIN 53456) • Elongation at break: 200 - 500 % (DIN 53455) • Notch impact strength: 16 kJ/m2 (DIN 53453) • Coefficient of sliding friction against steel (dry): approx. 0.18 - 0.23 • Shore hardness D: 55° - 72° (DIN 53505) • Water absorption: <0.01 % • Volume resistivity: 1018 Ohm x cm (DIN 53482) • Surface resistance: 1017 Ohm (DIN 53482) • Dielectric constant: 2.1 at 50 Hz (DIN 53483) • Flammability rating: UL 94 V-0

THOMAPLAST®-Hexagon Head Screw (DIN 933) made of PA Technical specification

• Material: polyamide 6.6 • Colour: natural • Regulations: DIN 933, ISO 4017, NFE 27311, NFE 24017

THOMAPLAST®-Screws made of PTFE General product specification

Item

External thread

Thread length mm

337819 337820 337821 337822 337823 337824

M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4

8 8 10 10 12 12

h mm

WAF (SW) mm

Unit

Price

piece

EURO

1.15 1.15 1.15 1.15 1.15 1.15

3.2 3.2 3.2 3.2 3.2 3.2

25 50 25 50 25 50

44.00 72.00 44.00 72.00 44.00 72.00

THOMAPLAST® III - 2015 61

Fastening Elements Item 337825 337826 337827 337828 337829 337830 337831 337832 337833 337834 337835 337836 337837 337838 337839 337840 337841 337842 337843 337844 337845 337846 337847 337848 301563 301564 309236 309237 301565 301566 301567 301568 301569 301570 301571 301572 301573 301574 301575 301576 301577 301578 309804 309805 309806 309807 309808 309809 309810 309811 309812 309813 301579 301580 301581

Screws

External thread

Thread length mm

M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7

16 16 20 20 25 25 4 4 5 5 6 6 8 8 10 10 12 12 16 16 20 20 25 25 4 4 5 5 6 6 8 8 10 10 12 12 16 16 18 18 20 20 25 25 30 30 35 35 40 40 5 5 6 6 8

62 THOMAPLAST® III - 2015

h mm

WAF (SW) mm

1.15 1.15 1.15 1.15 1.15 1.15 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.8 2.8 2.8 2.8 2.8

3.2 3.2 3.2 3.2 3.2 3.2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7

Unit

Price

Item

External thread

Thread length mm

piece

EURO

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 46.00 78.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 28.00 47.00 28.00 47.00 28.00 47.00 37.00 63.00 37.00 63.00 25.00 43.00 25.00 43.00 25.00

301582 301583 301584 301585 301586 301587 301588 301589 301590 301591 301592 309814 309815 309816 309817 309818 309819 309820 309821 333079 333080 309822 309823 309824 309825 309826 309827 301593 301594 301595 301596 301597 301598 301599 301600 301601 301602 301603 301604 309828 309829 309830 309831 309832 309833 309834 309835 309836 309837 309838 309839 309840 309841 309842 309843

M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

8 10 10 12 12 16 16 18 18 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70

h mm

WAF (SW) mm

Unit

Price

piece

EURO

2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50

43.00 25.00 43.00 25.00 43.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 34.00 60.00 36.00 62.00 38.00 66.00 46.00 70.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 44.00 75.00 44.00 75.00 44.00 75.00 44.00 75.00 44.00 75.00 38.00 66.00 38.00 66.00

Fastening Elements Item

Screws

External thread

Thread length mm

301605 301606 309846 309847 309848 309849 301607 301608 301609 301610

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

5 5 6 6 8 8 10 10 12 12

301611 301612 301613 301614 309850 309851 309852 309853 309854 309855 309856 309857 309858 309859 309860 309861 309862 309863 309866 309867 309868 309869 309870 309871 309872 309873 309874 309875 301615 301616 309876 309877 301617 301618 301619

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 90 90 100 100 6 6 8 8 10 10 12 12 16 16 20

h mm

WAF (SW) mm

4 4 4 4 4 4 4 4 4 4

10 10 10 10 10 10 10 10 10 10

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13

Unit

Price

Item

piece

EURO

50 100 50 100 50 100 50 100 50 100

26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50

29.00 52.00 29.00 52.00 29.00 52.00 34.00 58.00 34.00 58.00 34.00 58.00 40.00 70.00 40.00 70.00 40.00 70.00 54.00 92.00 46.00 76.00 50.00 84.00 44.00 74.00 44.00 74.00 44.00 74.00 52.00 84.00 52.00 84.00 52.00

301620 301621 301622 301623 301624 301625 301626 301627 301628 309880 309881 309882 309883 309886 309887 309890 309891 309892 309893 309894 309895 309898 309899 309900 309901 309902 309903 309878 309879 309904 309905 301629 301630 301631 301632 301633 301634 301635 301636 301637 301638 309906 309907 309908 309909 309910 309911 309914 309915 309922 309923 309924 309925 309926 309927

External thread

Thread length mm

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 90 90 100 100 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 16 16 20 20 25 25

h mm

WAF (SW) mm

Unit

Price

piece

EURO

5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 10 10 10 10 10 10

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 19 19 19 19 19 19

100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 20 10 20 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40 25 50 25 50 25 50

84.00 53.00 89.00 28.00 48.00 32.00 54.00 32.00 54.00 35.00 60.00 35.00 60.00 38.00 65.00 49.00 83.00 30.00 50.00 33.00 54.00 32.00 53.00 32.00 53.00 32.00 53.00 34.00 57.00 34.00 57.00 38.00 66.00 38.00 66.00 49.00 83.00 49.00 83.00 49.00 83.00 46.00 77.00 48.00 96.00 43.00 72.00 51.00 84.00 42.00 72.00 42.00 72.00 46.00 76.00

THOMAPLAST® III - 2015 63

Fastening Elements Item 309928 309929 309912 309913 309930 309931 309916 309917 309932 309933 309934 309935 309938 309939 309942 309943 309944 309945 309946 309947 309918 309919 309920 309921 309948 309949 309950 309951 309936 309937 309952 309953 309940 309941 309954 309955 309956 309957 309958 309959 332693 332694 332695 332696 332697 332698 332699 332700 332701 332702 332703 332704 332705 332706 332707

External thread

Thread length mm

M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2

30 30 35 35 40 40 45 45 50 50 60 60 80 80 30 30 35 35 40 40 45 45 50 50 55 55 60 60 65 65 70 70 75 75 80 80 90 90 100 100 105 105 110 110 115 115 120 120 125 125 130 130 135 135 140

64 THOMAPLAST® III - 2015

Screws h mm

WAF (SW) mm

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

19 19 19 19 19 19 19 19 19 19 19 19 19 19 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24

Unit

Price

Item

External thread

Thread length mm

piece

EURO

25 50 20 40 20 40 20 40 20 40 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

46.00 76.00 41.00 71.00 41.00 70.00 43.00 86.00 43.00 86.00 26.00 44.00 30.00 51.00 60.00 88.00 60.00 88.00 60.00 88.00 60.00 88.00 60.00 88.00 60.00 88.00 60.00 88.00 60.00 88.00 60.00 88.00 60.00 88.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00

332708 332709 332710 332711 332712 309960 309961 337223 337224 309962 309963 309884 309885 309964 309965 309966 309967 309968

M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5

140 145 145 150 150 30 30 35 35 40 40 45 45 50 50 55 55 60

309969 309970 309971 309972 309973 309974 309975 332713 332714 332715 332716 332717 332718 332719 332720 332721 332722 332723 332724 332725 332726 332727 332728 332729 332730 332731 332732

M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5

60 65 65 70 70 75 75 80 80 85 85 90 90 95 95 100 100 105 105 110 110 115 115 125 125 130 130

h mm

WAF (SW) mm

Unit

Price

piece

EURO

10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13

24 24 24 24 24 27 27 27 27 27 27 27 27 27 27 27 27 27

10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

94.00 58.00 94.00 58.00 94.00 48.00 78.00 48.00 78.00 48.00 78.00 48.00 78.00 48.00 78.00 48.00 78.00 48.00

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27

10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

78.00 48.00 78.00 48.00 78.00 48.00 78.00 66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00

Fastening Elements Item

External thread

Thread length mm

332733 332734 332735 332736 332737 332738 332739 332740 332741 332742 332743 332744 332745 332746 332747 332748 332749 332750 332751 332752 332753 332754 332755 332756 332757 332758 332759 332760 332761 332762 332763 332764 332765 332766 332767 332768 332769 332770 332771 332772 332773 332774 332775 332776 332777 332778 332779 332780 332781 332782 332783 332784 332785 332786 332787

M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M20 x 2.5 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

135 135 140 140 145 145 150 150 30 30 35 35 40 40 45 45 50 50 55 55 60 60 65 65 70 70 75 75 80 80 85 85 90 90 95 95 100 100 105 105 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145

Screws h mm

WAF (SW) mm

13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17

27 27 27 27 27 27 27 27 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33

Unit

Price

Item

External thread

Thread length mm

piece

EURO

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5

66.00 102.00 66.00 102.00 66.00 102.00 66.00 102.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 58.00 94.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00 134.00 84.00

332788 332789 332790

M24 x 3 M24 x 3 M24 x 3

145 150 150

h mm

WAF (SW) mm

Unit

Price

piece

EURO

17 17 17

33 33 33

10 5 10

134.00 84.00 134.00

THOMAPLAST®-Hexagon Head Screw (DIN 933) made of PP Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 933, DIN EN ISO 24017

Item

Thread length mm

WAF

Unit

External thread

Price

piece

EURO

309982 309983 309986 309987 309990 309991 310004 310005 310010 310011 310014 310015 310034 310035 310038 310039 310040 310041 310042 310043 310044 310045 310070 310071 310072 310073 310074 310075 310080 310081

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

10 10 16 16 20 20 10 10 16 16 20 20 12 12 16 16 20 20 25 25 30 30 16 16 20 20 25 25 40 40

2 2 2 2 2 2 2.8 2.8 2.8 2.8 2.8 2.8 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4

5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

36.00 60.00 36.00 60.00 36.00 60.00 48.00 76.00 48.00 76.00 48.00 76.00 48.00 76.00 48.00 76.00 52.00 88.00 52.00 88.00 52.00 88.00 48.00 76.00 52.00 88.00 52.00 88.00 66.00 112.00

THOMAPLAST® III - 2015 65

Fastening Elements Item

Screws

Thread length mm

WAF

Unit

External thread

Price

Item

310108 310109 310112 310113 310116 310117 310124 310125 310144 310145 310152 310153

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

20 20 30 30 40 40 60 60 20 20 60 60

5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 6.4 6.4 6.4 6.4

13 13 13 13 13 13 13 13 17 17 17 17

Thread length mm

WAF

Unit

External thread

piece

EURO

10 25 10 25 10 25 10 25 5 15 5 15

48.00 96.00 58.00 122.00 58.00 122.00 58.00 122.00 72.00 184.00 72.00 184.00

piece

EURO

310289 310290 310291 310292 310293 301555 301556 310316 310317 301557 301558 310320 310321 310322 310323 310328 310329 301559 301560 301561 301562 310360 310361 310364 310365 310372 310373

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

20 25 25 30 30 10 10 12 12 16 16 20 20 25 25 40 40 10 10 20 20 30 30 40 40 60 60

3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4 4 4 4 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13

50 10 25 10 25 25 50 10 25 10 25 10 25 10 25 10 25 25 50 25 50 10 25 10 25 5 15

165.00 46.00 96.00 50.00 104.00 75.00 115.00 51.00 105.00 75.00 120.00 51.00 105.00 54.00 116.00 64.00 130.00 140.00 220.00 170.00 270.00 92.00 178.00 102.00 198.00 72.00 170.00

THOMAPLAST®-Hexagon Head Screw (DIN 933) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 933, DIN EN ISO 24017

Price

THOMAPLAST®-Slotted Hexagon Head Screw (DIN 933) made of PA Item

Thread length mm

WAF

Unit

Price

External thread

piece

EURO

310230 310231 310234 310235 310238 310239 301547 301548 301549 301550 310258 310259 310262 310263 310266 310267 301551 301552 301553 301554 310288

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

10 10 16 16 20 20 6 6 10 10 16 16 20 20 30 30 12 12 16 16 20

2 2 2 2 2 2 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 3.5 3.5 3.5 3.5 3.5

5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25

76.00 128.00 82.00 134.00 82.00 134.00 55.00 85.00 55.00 85.00 82.00 134.00 82.00 134.00 90.00 146.00 65.00 100.00 70.00 110.00 99.00

66 THOMAPLAST® III - 2015

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 933

Item

Thread length mm

WAF

Unit

External thread

Price

piece

EURO

337849 337850 337851 337852 337853 337854

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5

4 4 5 5 6 6

2 2 2 2 2 2

5.5 5.5 5.5 5.5 5.5 5.5

25 50 25 50 25 50

44.00 72.00 44.00 72.00 44.00 72.00

Fastening Elements Item

Screws

Thread length mm

WAF

Unit

External thread

Price

Item

337855 337856 337857 337858 337859 337860 337861 337862 337863 337864 337865 337866 337867 337868 337869 337870 337871 337872 337873 337874 337875 337876 337877 337878 337879 337880 337881 337882 337883 337884 337885 337886 337887 337888 337889 337890 337891 337892 337893 337894 337895 337896 337897 337898 337899 337900 337901 337902 337903 337904 337905 337906 337907 337908 337909

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

8 8 10 10 12 12 16 16 20 20 25 25 30 30 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 6.5 6.5 8 8 10

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4

5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10

Thread length mm

WAF

Unit

External thread

piece

EURO

25 50 25 50 25 50 25 50 25 50 25 50 25 50 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 50 100 50 100 50

48.00 80.00 44.00 72.00 48.00 80.00 48.00 80.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 74.00 44.00 74.00 46.00 76.00 46.00 76.00 46.00 76.00 46.00 76.00 46.00 76.00 44.00 72.00 46.00 76.00 44.00 72.00 44.00 72.00 44.00 72.00 56.00 96.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 46.00 74.00 46.00 74.00 58.00

Price

piece

EURO

337910 337911 337912 337913 337914 337915 337916 337917 337918 337919 337920 337921 337922 337923 337924 337925 337926 337927 337928 337929 337930 337931 337932 337933 337934 337935 337936 337937 337938 337939 337940 337941 337942 337943 337944 337945 337946 337947 337948 337949 337950 337951 337952 337953 337954 337955 337956 337957 337958 337959 337960 337961 337962 337963 337964

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

10 12 12 16 16 20 20 25 25 30 30 40 40 45 45 50 50 60 60 70 70 80 80 8 8 10 10 16 16 20 20 25 25 30 30 35 35 40 40 50 50 60 60 70 70 80 80 16 16 20 20 30 30 40 40

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 6.7 6.7 6.7 6.7 6.7 6.7 6.7 6.7

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17

100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 25 10 25 10 25 10 25 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 5 15 10 25 5 15 10 25 10 25 10 25 10 25 10 25

100.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 44.00 72.00 56.00 96.00 52.00 90.00 48.00 106.00 80.00 172.00 88.00 192.00 90.00 194.00 44.00 72.00 44.00 72.00 46.00 76.00 46.00 76.00 46.00 76.00 46.00 76.00 66.00 114.00 66.00 114.00 66.00 168.00 44.00 96.00 76.00 176.00 44.00 96.00 44.00 96.00 58.00 124.00 44.00 96.00 44.00 96.00

THOMAPLAST® III - 2015 67

Fastening Elements

Screws

THOMAPLAST®-Slotted Hexagon Head Screw (DIN 931) made of PA - with Shank

Item

Product specification

338266 338267 338268 338269 338270 338273 338274

• Partially threaded • Corrosion-proof, antimagnetic and vibration-free • High chemical resistance and low thermal conductivity • Good insulation and thermal resistance (-30 up to max. +120 °C) • Have proved great success in electrical engineering, chemical industry, vehicle and apparatus construction, as well as in building industry

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Color: natural • Regulations: DIN 931, ISO 4014, NFE 24014

External Thread l1 thread length mm mm M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M16 x 2 M16 x 2

70 80 80 125 125 50 50

20 30 30 90 90 12 12

WAF

10 10 10 10 10 10 10

19 19 19 19 19 24 24

Unit

Price

piece EURO 25 5 15 5 15 5 15

214.00 58.00 152.00 62.00 162.00 70.00 182.00

THOMAPLAST®-Hexalobular Socket Flange Bolt made of PA

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural

Item 338235 338236 338237 338238 338239 338240 338241 338242 338243 338244 338245 338246 338247 338248 338249 338250 338251 338252 338253 338254 338255 338256 338257 338258 338259 338260 338261 338262 338263 338264 338265

External Thread l1 thread length mm mm M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

50 50 60 60 80 80 100 100 80 80 100 100 125 125 40 40 60 60 70 70 80 80 125 125 150 150 40 40 60 60 70

68 THOMAPLAST® III - 2015

34 34 10 10 15 15 60 60 20 20 50 50 75 75 8 8 10 10 10 10 30 30 65 65 90 90 10 10 10 10 20

WAF

3.5 3.5 4 4 4 4 4 4 5.3 5.3 5.3 5.3 5.3 5.3 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 10 10 10 10 10

8 8 10 10 10 10 10 10 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 19 19 19 19 19

Unit

Price

piece EURO 25 50 25 50 25 50 25 50 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10

46.00 80.00 56.00 96.00 58.00 102.00 60.00 104.00 48.00 102.00 52.00 112.00 58.00 124.00 74.00 160.00 78.00 164.00 80.00 170.00 82.00 176.00 84.00 182.00 88.00 190.00 90.00 194.00 94.00 202.00 98.00

External thread: M4 x 0.7

Item 338031 338032 338033 338034 338035 338036 338037 338038 338039 338040 338041 338042 338043 338044

Thread D length mm mm 6 6 8 8 10 10 12 12 16 16 18 18 20 20

11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5

h mm 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8

WAF Unit (SW) mm degree mm piece 2 2 2 2 2 2 2 2 2 2 2 2 2 2

20 20 20 20 20 20 20 20 20 20 20 20 20 20

2 2 2 2 2

20 20 20 20 20

8 8 8 8 8 8 8 8 8 8 8 8 8 8

25 50 25 50 25 50 25 50 25 50 25 50 25 50

Price EURO 16.00 26.00 16.00 26.00 30.00 52.00 16.00 26.00 16.00 26.00 28.00 46.00 16.00 26.00

External thread: M5 x 0.8 Item 338045 338046 338047 338048 338049

Thread D length mm mm 6 6 8 8 10

11.5 11.5 11.5 11.5 11.5

h mm 5.8 5.8 5.8 5.8 5.8

WAF Unit (SW) mm degree mm piece 8 8 8 8 8

25 50 25 50 25

Price EURO 28.00 46.00 18.00 30.00 18.00

Fastening Elements Item 338050 338051 338052 338053 338054 338055 338056

Thread D length mm mm 10 12 12 16 16 20 20

11.5 11.5 11.5 11.5 11.5 11.5 11.5

Screws h1

5.8 5.8 5.8 5.8 5.8 5.8 5.8

2 2 2 2 2 2 2

20 20 20 20 20 20 20

WAF Unit (SW) mm degree mm piece 8 8 8 8 8 8 8

50 25 50 25 50 25 50

Price

Item

EURO

30.00 18.00 30.00 18.00 30.00 18.00 30.00

338087 338088 338089 338090 338091 338092 338093 338094

External thread: M6 x 1 Item 338057 338058 338059 338060 338061 338062 338063 338064 338065 338066 338067 338068 338069 338070 338071 338072

Thread D length mm mm 6.5 6.5 8 8 10 10 12 12 16 16 20 20 25 25 30 30

14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

WAF Unit (SW) mm degree mm piece

EURO

6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6

2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4

26.00 38.00 26.00 38.00 26.00 38.00 26.00 38.00 42.00 68.00 28.00 48.00 28.00 48.00 32.00 52.00

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

Price

Item 338073 338074 338075 338076 338077 338078 338079 338080 338081 338082 338083 338084

Thread D length mm mm 8 8 10 10 16 16 20 20 25 25 30 30

18 18 18 18 18 18 18 18 18 18 18 18

WAF Unit (SW) mm degree mm piece

Price

8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1

2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7

40 40 40 40 40 40 40 40 40 40 40 40

13 13 13 13 13 13 13 13 13 13 13 13

25 50 25 50 25 50 10 25 25 50 25 50

42.00 68.00 32.00 52.00 32.00 52.00 52.00 114.00 38.00 54.00 42.00 74.00

WAF

Unit

Price

mm degree mm

piece

EURO

10.4 10.4

3.5 3.5

10 25

42.00 90.00

EURO

External thread: M10 x 1.5 Item 338085 338086

Thread D length mm mm 40 40

22 22

50 50

16 16

22 22 22 22 22 22 22 22

WAF

Unit

Price

mm degree mm

piece

EURO

10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4

3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5

10 25 10 25 10 25 10 25

44.00 94.00 64.00 140.00 52.00 114.00 42.00 90.00

50 50 50 50 50 50 50 50

16 16 16 16 16 16 16 16

Technical specification

• Material: polyamide 6.6 • Colour: natural • Regulations: DIN 84, ISO 1207, NFE 27115, NFE 25127

Item

50 50 60 60 70 70 80 80

THOMAPLAST®-Slotted Cheese Head Screw (DIN84) made of PA

External thread: M8 x 1.25

Thread D length mm mm

309186 309187 309188 309189 309190 309191 309192 309193 309194 309195 309196 309197 309198 309199 309200 309201 309202 309203 309204 309205 309206 309207 301433 301434

External thread

Thread length mm

Unit

Price

piece

EURO

6 6 8 8 10 10 16 16 20 20 6 6 8 8 10 10 12 12 16 16 20 20 4 4

4 4 4 4 4 4 4 4 4 4 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.5 5.5

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

33.00 60.00 33.00 60.00 33.00 60.00 35.00 67.00 35.00 67.00 33.00 60.00 33.00 60.00 33.00 60.00 35.00 67.00 35.00 67.00 35.00 67.00 35.00 67.00

THOMAPLAST® III - 2015 69

Fastening Elements Item

Screws Thread length mm

Unit

External thread

309208 309209 301435 301436 301437 301438 301439 301440 301441 301442 301443 301444 301447 301448 309212 309213 309214 309215 309216 309217 309218 309219 309220 309221 301449 301450 301451 301452 301453 301454 301455 301456 301457 301458 301461 301462 309222 309223 309224 309225 309226 309227 309228 309229 309230 309231 309232 309233 309256 309257 309234 309235 301463 301464 301465

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8

5 5 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 5 5 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 6 6 8

5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8.5 8.5 8.5

70 THOMAPLAST® III - 2015

Price

Item

Thread length mm

Unit

External thread

piece

EURO

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

25.00 41.00 25.00 41.00 25.00 41.00 25.00 41.00 25.00 41.00 27.00 46.00 27.00 46.00 27.00 46.00 27.00 46.00 31.00 56.00 39.00 68.00 25.00 42.00 25.00 42.00 25.00 42.00 25.00 42.00 25.00 42.00 29.00 50.00 29.00 50.00 29.00 50.00 32.00 56.00 32.00 56.00 32.00 56.00 36.00 60.00 36.00 60.00 41.00 70.00 41.00 70.00 30.00 52.00 30.00

Price

piece

EURO

301466 301467 301468 301469 301470 301471 301472 301473 301474 309238 309239 309240 309241 309242 309243 309244 309245 309246 309247 309248 309249 309250 309251

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60

8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50

52.00 30.00 52.00 30.00 52.00 35.00 60.00 35.00 60.00 35.00 60.00 38.00 65.00 38.00 65.00 43.00 73.00 43.00 73.00 43.00 73.00 34.00 58.00

309252 309253 301475 301476 301477 301478 301479 301480 301481 301482 301483 301484 301485 301486 309258 309259 309260 309261 309262 309263 309264

M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

70 70 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40

8.5 8.5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

25 50 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

34.00 58.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 31.00 52.00 31.00 52.00 31.00 52.00 33.00 57.00 33.00 57.00 33.00

Fastening Elements Item

Screws Thread length mm

Unit

External thread

Price

Item

309265 309210 309211 309266 309267 309268 309269 309270 309271 309272 309273 309274 309275 309276 309277 301487 301488 309278 309279 301489 301490 301491 301492 301493 301494 301495 301496 301497 301498 301499 301500 309282 309283 309284 309285 309288 309289 309290 309291 305928 305931 309294 309295 309296 309297 309298 309299 309300 309301 301501 301502 301503 301504 301505 301506

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

40 45 45 50 50 60 60 80 80 90 90 100 100 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30

10 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

piece

EURO

100 50 100 50 100 50 100 50 100 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

57.00 38.00 66.00 38.00 66.00 40.00 69.00 54.00 92.00 42.00 69.00 50.00 84.00 38.00 74.00 38.00 74.00 38.00 74.00 49.00 84.00 49.00 84.00 49.00 84.00 30.00 50.00 30.00 50.00 33.00 56.00 33.00 56.00 38.00 64.00 38.00 64.00 49.00 83.00 32.00 52.00 32.00 52.00 32.00 52.00 34.00 57.00 34.00 57.00 38.00 65.00 38.00 65.00 41.00 70.00

301507 301508 301509 301510 309302 309303 309304 309305 309306 309307 309310 309311 309318 309319 309320 309321 309322 309323 309324 309325 309312 309313 309326 309327 309314 309315 309328 309329 309330 309331 309334 309335

External thread

Thread length mm

Unit

Price

piece

EURO

M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

35 35 40 40 45 45 50 50 60 60 80 80 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80

16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

25 50 25 50 25 50 25 50 20 40 20 40 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 25

41.00 70.00 43.00 72.00 48.00 82.00 48.00 82.00 43.00 72.00 51.00 84.00 39.00 65.00 39.00 65.00 42.00 71.00 46.00 76.00 49.00 81.00 52.00 86.00 54.00 88.00 54.00 88.00 60.00 99.00 26.00 46.00

THOMAPLAST®-Slotted Cheese Head Screw (DIN 84) made of PP Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 84, ISO 1207, NFE 27115, NFE 25127

THOMAPLAST® III - 2015 71

Fastening Elements Item

Screws Thread length mm

Unit

External thread

piece

EURO

309366 309367 309372 309373 309374 309375 309384 309385 309388 309389 309394 309395 309396 309397 309400 309401 309416 309417 309422 309423 309424 309425 309426 309427 309428 309429 309432 309433 309446 309447 309448 309449 309454 309455 309456 309457 309458 309459 309460 309461 309478 309479 309484 309485 309486 309487 309488 309489 309492 309493 309514 309515 309522 309523

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

10 10 16 16 20 20 6 6 10 10 16 16 20 20 30 30 10 10 16 16 20 20 25 25 30 30 40 40 8 8 10 10 16 16 20 20 25 25 30 30 10 10 16 16 20 20 30 30 40 40 20 20 40 40

5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7 7 7 7 7 7 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 16 16 16 16

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 25 10 25 10 25 10 25 10 25 5 15 5 15

36.00 60.00 36.00 60.00 36.00 60.00 48.00 76.00 48.00 76.00 48.00 76.00 48.00 76.00 48.00 76.00 48.00 76.00 48.00 76.00 52.00 88.00 52.00 88.00 52.00 88.00 52.00 88.00 48.00 76.00 48.00 76.00 48.00 76.00 52.00 88.00 52.00 88.00 66.00 112.00 42.00 86.00 48.00 96.00 48.00 96.00 58.00 122.00 58.00 122.00 72.00 184.00 72.00 184.00

72 THOMAPLAST® III - 2015

Price

THOMAPLAST®-Slotted Cheese Head Screw (DIN 84) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 84, ISO 1207, NFE 27115, NFE 25127

Item

Thread length mm

Unit

External thread

Price

piece

EURO

309586 309587 309590 309591 309596 309597 309598 309599 301401 301402 301403 301404 309618 309619 309620 309621 309624 309625 309640 309641 301405 301406 301407 301408 309648 309649 309650 309651 309652 309653 309656 309657 309670 309671 301409 301410 301411 301412

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

6 6 10 10 16 16 20 20 6 6 10 10 16 16 20 20 30 30 10 10 12 12 16 16 20 20 25 25 30 30 40 40 8 8 10 10 16 16

5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7 7 7 7 7 7 7 7 7 7 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 10 10 10 10 10 10

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 25 25 50 25 50 25 50 10 25 10 25 10 25 10 25 25 50 25 50 25 50

52.00 88.00 52.00 88.00 52.00 88.00 52.00 88.00 58.00 97.00 58.00 97.00 58.00 97.00 58.00 97.00 30.00 60.00 52.00 92.00 60.00 106.00 60.00 106.00 34.00 68.00 34.00 68.00 40.00 74.00 40.00 74.00 58.00 102.00 58.00 102.00 75.00 130.00

Fastening Elements Item

Screws Thread length mm

Unit

External thread

Price

piece

EURO

309680 309681 309682 309683 309684 309685 301413 301414 301415 301416 309710 309711 309712 309713 309716 309717

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

20 20 25 25 30 30 10 10 16 16 20 20 30 30 40 40

10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13

10 25 10 25 10 25 10 25 10 25 10 25 5 15 5 15

75.00 130.00 44.00 80.00 44.00 80.00 66.00 140.00 66.00 140.00 66.00 140.00 54.00 136.00 54.00 136.00

THOMAPLAST®-Slotted Cheese Head Screw (DIN 84) made of PTFE Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: milky white • Regulations: similar to DIN 84, ISO 1207; conforming to FDA

Item

Thread length mm

Unit

External thread

Price

piece

EURO

310110 310111 310114 310115 310118 310119 310120 310121 310122 310123

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

30 30 30 30 30 30 40 40 40 40

7 7 8.5 8.5 10 10 13 13 16 16

1 5 1 5 1 5 1 5 1 5

24.00 105.00 24.00 105.00 26.00 117.00 28.00 126.00 30.00 135.00

THOMAPLAST®-Hexagon Socket Head Cap Screw (DIN 912) made of PA Technical specification

• Material: polyamide 6.6 • Colour: natural • Regulations: DIN 912, ISO 4762, NFE 27161, NFE 25125

Item

External thread

Thread length mm

Unit

Price

piece

EURO

332893 332894 332895 332896 332897 332898 332899 332900 332901 332902 332903 332904 332905 332906 332907 332908 332909 332910 332911 332912 332913 332914 332915 332916 332917 332918 332919 332920 332921 332922 332923 332924 332925 332926 332927 332928 332929 332930

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

34.00 58.00 34.00 58.00 34.00 58.00 34.00 58.00 34.00 58.00 34.00 58.00 34.00 58.00 34.00 58.00 44.00 74.00 44.00 74.00 51.00 87.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 36.00 62.00 36.00 62.00 36.00 62.00 36.00 62.00

THOMAPLAST® III - 2015 73

Fastening Elements Item

Screws

External thread

Thread length mm

332931 332932 332933 332934 332935 332936 332937 332938 332939 332940 332941 332942 332943 332944 332945 332946 332947 332948 332949 332950 332951 332952 332953 332954 332955 332956 332957 332958 332959 332960 332961 332962 332963 332964 332965 332966 332967 332968 332971 332972 305250 305251 309336 309337 305252 305253 309280 309281 305254 305255 305256 305257 305258 305259 305260

M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

35 35 40 40 45 45 50 50 55 55 60 60 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30

74 THOMAPLAST® III - 2015

Unit

Price

Item

External thread

Thread length mm

piece

EURO

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

42.00 70.00 42.00 70.00 42.00 70.00 46.00 78.00 46.00 78.00 46.00 78.00 34.00 58.00 34.00 58.00 34.00 58.00 34.00 58.00 44.00 74.00 44.00 74.00 49.00 83.00 49.00 83.00 56.00 95.00 56.00 95.00 35.00 60.00 35.00 60.00 35.00 60.00 39.00 67.00 30.00 50.00 30.00 50.00 30.00 50.00 30.00 50.00 30.00 50.00 33.00 55.00 33.00 55.00 33.00

Unit

Price

piece

EURO

305261 309286 309287 305262 305263 309308 309309 305264 305265 305266 305267 305268 305269 305808 305811 309154 309155 309156 309157 305270 305271 305304 305305 305272 305273 305274 305275 305276 305277 305278 305279 305280 305281 305282 305283 305284 305285 305286 305287 309864 309865 305288 305289 305741 305742 305743 305744 305290 305291 305745 305746 305747 305748 305292 305293

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

30 35 35 40 40 45 45 50 50 60 60 70 70 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 50 50 60 60 70 70 80 80 6 6 8 8 10 10 12 12 16 16 20 20

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

55.00 33.00 55.00 39.00 66.00 39.00 66.00 39.00 66.00 52.00 88.00 52.00 88.00 55.00 93.00 44.00 75.00 44.00 75.00 44.00 75.00 44.00 75.00 52.00 90.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 38.00 65.00 38.00 65.00 49.00 83.00 49.00 83.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 36.00 62.00

Fastening Elements Item 305294 305295 305296 305297 305749 305750 305298 305299 305753 305756 305300 305301 305302 305303 305306 305307 332985 332986 332987 332988 332989 332990 332991 332992 332993 332994 332995 332996 332997 332998 332999 333000 333001 333002 333003 333004

Screws

External thread

Thread length mm

M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80

Unit

Price

Item

piece

EURO

25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40

42.00 72.00 42.00 72.00 45.00 74.00 45.00 74.00 48.00 82.00 48.00 82.00 54.00 90.00 51.00 85.00 54.00 90.00 54.00 90.00 58.00 96.00 58.00 96.00 62.00 99.00 62.00 99.00 62.00 99.00 34.00 57.00 34.00 57.00 38.00 62.00

THOMAPLAST®-Hexagon Socket Head Cap Screw (DIN 912) made of PP Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 912, ISO 4762, NFE 27161, NFE 25125

Thread length mm

WAF

Unit

External thread

Price

piece

EURO

337103 337104 337105 337106 337107 337108 337109 337110 337111 337112 337113 337114 337117 337118 337119 337120 337121 337122 337123 337124 337125 337126 337127 337128 337129 337130 337131 337132 337133 337134 337135 337136 337139 337140 337141 337142 337143 337144 337145 337146 337147 337148 337149 337150 337151 337152 337153 337154 337155 337156 337157 337158 337159 337160 337161

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 60 60 10 10 16 16 20 20 25 25 30 30 40 40 50 50 60 60 70 70 80 80 16 16 20 20 30 30 40 40 50 50 60 60 70

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 16 16 16 16 16 16 16 16 16 16 16 16 16

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25

64.00 108.00 64.00 108.00 68.00 112.00 68.00 112.00 68.00 112.00 72.00 122.00 72.00 122.00 72.00 122.00 76.00 130.00 76.00 130.00 76.00 130.00 76.00 130.00 82.00 138.00 82.00 138.00 82.00 138.00 84.00 144.00 84.00 144.00 94.00 160.00 94.00 160.00 94.00 160.00 94.00 160.00 94.00 160.00 94.00 160.00 94.00 160.00 62.00 108.00 62.00 108.00 62.00 108.00 62.00

THOMAPLAST® III - 2015 75

Fastening Elements Item 337162 337163 337164 337165 337166 337167 337168 337169 337170 337171 337172 337173 337174 337175 337176 337177 337178

Screws

External thread

Thread length mm

WAF

Unit

Price

Item

M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

70 80 80 20 20 30 30 40 40 50 50 60 60 70 70 80 80

16 16 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18

8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10

piece

EURO

50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

108.00 62.00 108.00 62.00 108.00 62.00 108.00 72.00 126.00 72.00 126.00 72.00 126.00 72.00 126.00 72.00 126.00

THOMAPLAST®-Hexagon Socket Head Cap Screw (DIN 912) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 912, ISO 4762, NFE 27161, NFE 25125

Item 337189 337190 337191 337192 337193 337194 337195 337196 337197 337198 337199 337202 337203 337204 337205 337206

External thread

Thread length mm

WAF

Unit

piece

EURO

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

94.00 152.00 94.00 152.00 94.00 152.00 96.00 152.00 96.00 152.00 98.00 162.00 98.00 162.00 104.00 168.00

76 THOMAPLAST® III - 2015

Price

337207 337208 337209 337210 337211 337212 337213 337214 337215 337216 337217 337218 337219 337220 337221 337222 337225 337226 337227 337228 337229 337230 337231 337232 337233 337234 337235 337236 337237 337238 337239 337240 337241 337242 337243 337244 337245 337246 337247 337248 337249 337250 337251 337252 337253 337254 337255 337256 337257 337258 337259 337260 337261 337262

External thread

Thread length mm

WAF

Unit

Price

piece

EURO

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

40 40 50 50 60 60 10 10 16 16 20 20 25 25 30 30 40 40 50 50 60 60 70 70 80 80 16 16 20 20 30 30 40 40 50 50 60 60 70 70 80 80 20 20 30 30 40 40 50 50 60 60 70 70

10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18 18

5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10

25 50 25 50 25 50 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25

104.00 168.00 106.00 174.00 106.00 174.00 80.00 170.00 82.00 174.00 86.00 182.00 86.00 182.00 86.00 182.00 90.00 190.00 90.00 190.00 92.00 196.00 92.00 196.00 94.00 198.00 122.00 258.00 122.00 258.00 128.00 270.00 128.00 270.00 132.00 280.00 132.00 280.00 138.00 290.00 138.00 290.00 170.00 360.00 170.00 360.00 178.00 378.00 178.00 378.00 182.00 392.00 182.00 392.00

Fastening Elements

Screws

THOMAPLAST®-Slotted Pan Head Screw (DIN 85) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 85, ISO 1580, NFE 27116, NFE 25128

Item 334619 334620 334621 334622 334623 334624 334625 334626 334627 334628 334629 334630 334631 334632 334633 334634 334635 334636 334637 334638 334639 334640 334643 334644 334645 334646 334647 334648 334649 334650 334651 334652 334653 334654 334657 334658 334659 334660

External thread

Thread length mm

Unit

Price

piece

EURO

M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M2.5 x 0.45 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5

6 6 8 8 10 10 16 16 20 20 6 6 8 8 10 10 12 12 16 16 20 20 5 5 6 6 8 8 10 10 12 12 16 16 20 20 25 25

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

33.00 60.00 33.00 60.00 33.00 60.00 35.00 67.00 35.00 67.00 33.00 60.00 33.00 60.00 33.00 60.00 35.00 67.00 35.00 67.00 35.00 67.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 28.00 47.00 28.00 47.00

Item

External thread

Thread length mm

Unit

Price

piece

EURO

334661 334662 334663 334664 334665 334666 334667 334668 334669 334670 334671 334672 334673 334674 334675 334676 334677 334678 334681 334682 334683 334684 334685 334686 334687 334688 334689 334690 334691 334692 334693 334694 334695 334696 334697 334698 334699 334700 334701 334702 334703 334704 334705 334706 334707 334708 334709 334710 334711 334712 334713 334714 334715 334716 334717

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

30 30 35 35 40 40 5 5 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

28.00 47.00 37.00 63.00 37.00 63.00 25.00 43.00 25.00 43.00 25.00 43.00 25.00 43.00 25.00 43.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 32.00 56.00 34.00 60.00 36.00 62.00 38.00 66.00 46.00 70.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 44.00 75.00 44.00 75.00 44.00

THOMAPLAST® III - 2015 77

Fastening Elements Item

Screws

External thread

Thread length mm

334718 334719 334720 334721 334722 334723 334724 334725 334726 334727 334728 334729 334730 334731 334732 334733 334734 334735 334736 334737 334738 334739 334740 334741 334742 334743 334744 334745 334746 334747 334748 334749 334750 334751 334752 334753 334754 334755 334756 334757 334758 334759 334760 334761 334762 334763 334764 334765 334766 334767 334768 334769 334770 334771 334772

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

40 45 45 50 50 60 60 70 70 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 90 90 100 100 8 8 10 10 12 12 16 16 20 20 25 25 30 30

78 THOMAPLAST® III - 2015

Unit

Price

Item

piece

EURO

100 50 100 50 100 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50 100 25 50

75.00 44.00 75.00 44.00 75.00 38.00 66.00 38.00 66.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 29.00 52.00 29.00 52.00 29.00 52.00 34.00 58.00 34.00 58.00 34.00 58.00 40.00 70.00 40.00 70.00 40.00 70.00 54.00 92.00 46.00 76.00 50.00 84.00 44.00 74.00 44.00 74.00 52.00 84.00 52.00 84.00 52.00 84.00 53.00 89.00 30.00 50.00

334773 334774 334775 334776 334777 334778 334779 334780 334781 334782 334783 334784 334785 334786 334787 334788 334789 334790 334791 334792 334793 334794 334795 334796 334797 334798 334799 334800 334801 334802 334803 334804 334805 334806 334807 334808 334809 334810 334811 334812 334813 334814 334815 334816 334817 334818 334819 334820 334821 334822 334823 334824 334825 334826 334827

External thread

Thread length mm

Unit

Price

piece

EURO

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

35 35 40 40 45 45 50 50 60 60 80 80 90 90 100 100 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 16 16 20 20 25 25 30 30 35 35 40

25 50 25 50 25 50 25 50 25 50 25 50 10 20 10 20 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40 25 50 25 50 25 50 25 50 25 50 25

30.00 50.00 33.00 56.00 33.00 56.00 38.00 65.00 38.00 65.00 49.00 83.00 30.00 50.00 33.00 54.00 32.00 53.00 32.00 53.00 32.00 53.00 34.00 57.00 34.00 57.00 38.00 66.00 38.00 66.00 41.00 70.00 41.00 70.00 43.00 72.00 48.00 82.00 48.00 82.00 43.00 72.00 51.00 84.00 42.00 72.00 42.00 72.00 46.00 76.00 46.00 76.00 49.00 81.00 52.00

Fastening Elements Item 334828 334829 334830 334831 334832 334833 334834 334835 334836

Screws

External thread

Thread length mm

M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

40 45 45 50 50 60 60 80 80

Unit

Price

Item

piece

EURO

50 25 50 25 50 25 50 10 25

86.00 54.00 88.00 54.00 88.00 60.00 99.00 26.00 46.00

THOMAPLAST®-Slotted Pan Head Screw (DIN 85) made of PP Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 85, ISO 1580

Item

Thread length mm

Unit

External thread

Price

piece

EURO

334881 334882 334883 334884 334885 334886 334887 334888 334889 334890 334891 334892 334893 334894 334895 334896 334897 334898 334899 334900 334901 334902 334903 334904

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 6 6 8 8 10 10

9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12 12 12 12 12 12

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

56.00 94.00 56.00 94.00 56.00 94.00 56.00 94.00 58.00 98.00 58.00 98.00 58.00 98.00 58.00 98.00 58.00 98.00 56.00 96.00 56.00 96.00 56.00 96.00

Thread length mm

Unit

External thread

Price

piece

EURO

334905 334906 334907 334908 334909 334910 334911 334912 334913 334914 334915 334916 334917 334918 334919 334920 334921 334922 334923 334924 334925 334926 334927 334928 334929 334930 334931 334932 334933 334934 334935 334936 334937 334938 334939 334940 334941 334942 334943 334944 334945 334946 334947 334948 334949 334950 334951 334952 334953 334954

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

12 12 16 16 20 20 25 25 30 30 40 40 50 50 10 10 16 16 20 20 25 25 30 30 35 35 40 40 50 50 60 60 80 80 16 16 20 20 30 30 40 40 50 50 60 60 70 70 80 80

12 12 12 12 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

60.00 102.00 60.00 102.00 60.00 102.00 64.00 108.00 64.00 108.00 64.00 108.00 70.00 116.00 70.00 116.00 70.00 116.00 70.00 116.00 74.00 124.00 40.00 66.00 40.00 66.00 40.00 66.00 52.00 88.00 52.00 88.00 52.00 88.00 48.00 84.00 48.00 84.00 48.00 84.00 52.00 92.00 52.00 92.00 52.00 92.00 56.00 98.00 56.00 98.00

THOMAPLAST® III - 2015 79

Fastening Elements

Screws

THOMAPLAST®-Slotted Pan Head Screw (DIN 85) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 85, ISO 1580

Item

Thread length mm

Unit

External thread

piece

EURO

334955 334956 334957 334958 334959 334960 334961 334962 334963 334964 334965 334966 334967 334968 334969 334970 334971 334972 334973 334974 334975 334976 334977 334978 334979 334980 334981 334982 334983 334984 334985 334986 334987 334988 334989 334990 334991 334992

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50

9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25

48.00 82.00 48.00 82.00 48.00 82.00 48.00 82.00 48.00 82.00 50.00 84.00 50.00 84.00 50.00 84.00 50.00 84.00 48.00 102.00 48.00 102.00 48.00 102.00 48.00 102.00 50.00 106.00 50.00 106.00 50.00 106.00 54.00 114.00 54.00 114.00 54.00 114.00

80 THOMAPLAST® III - 2015

Price

Item

Thread length mm

Unit

External thread

Price

piece

EURO

334993 334994 334995 334996 334997 334998 334999 335000 335001 335002 335003 335004 335005 335006 335007 335008 335009 335010 335011 335012 335013 335014 335015 335016 335017 335018 335019 335020 335021 335022 335023 335024 335025 335026 335027 335028 335029 335030 335031 335032

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

60 60 80 80 10 10 16 16 20 20 25 25 30 30 35 35 40 40 50 50 60 60 80 80 16 16 20 20 30 30 40 40 50 50 60 60 70 70 80 80

12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

1.6 1.6 1.6 1.6 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25

54.00 114.00 60.00 128.00 60.00 128.00 64.00 134.00 64.00 134.00 64.00 134.00 66.00 140.00 66.00 140.00 66.00 140.00 70.00 148.00 70.00 148.00 70.00 148.00 98.00 214.00 98.00 214.00 98.00 214.00 104.00 222.00 104.00 222.00 104.00 222.00 108.00 228.00 108.00 228.00

THOMAPLAST®-Cross Recessed Mushroom Head Screw (DIN 7985) made of PA

Fastening Elements

Screws

Technical specification

Item

• Material: polyamide 6.6 • Colour: natural • Regulations: DIN 7985, NFE 25121

Item

Thread length mm

Unit

External thread

Price

piece

EURO

305665 305666 305668 305669 305671 305672 305674 305675 305677 305678 305680 305681 305683 305684 337279 337280 305689 305690 305692 305693

M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

10 10 16 16 20 20 10 10 16 16 20 20 10 10 12 12 16 16 20 20

8 8 8 8 8 8 9.5 9.5 9.5 9.5 9.5 9.5 12 12 12 12 12 12 12 12

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

28.00 48.00 28.00 48.00 28.00 48.00 42.00 70.00 42.00 70.00 42.00 70.00 48.00 82.00 48.00 82.00 48.00 82.00 50.00 86.00

THOMAPLAST®-Slotted Mushroom Head Screw (NFE 25129) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: NFE 25129, NFE 27128

Item

Thread length mm

Unit

External thread

Price

piece

EURO

305724 305725 305727 305728 305730 305731 305733 305734 305736

M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7

6 6 8 8 10 10 12 12 16

9 9 9 9 9 9 9 9 9

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

25 50 25 50 25 50 25 50 25

30.00 53.00 30.00 53.00 30.00 53.00 30.00 53.00 30.00

Thread length mm

Unit

External thread

Price

piece

EURO

305737 305739 305740 305751 305752 305754 305755 305757 305758 305760 305761 305763 305764 305766 305767 305769 305770 305775 305776 305779 305780 305768 305771 305782 305783 305772 305773 305785 305786 305788 305789 305791 305792 305794 305795 305797 305798 305800 305801 305774 305777 305802 305803 305805 305806 305778 305781 305784 305787

M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

16 20 20 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 80 80

9 9 9 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50

53.00 30.00 53.00 43.00 73.00 43.00 73.00 43.00 73.00 43.00 73.00 46.00 77.00 46.00 76.00 46.00 76.00 48.00 80.00 40.00 67.00 40.00 67.00 40.00 67.00 40.00 67.00 40.00 67.00 45.00 76.00 45.00 76.00 45.00 76.00 52.00 89.00 52.00 89.00 52.00 89.00 32.00 54.00 32.00 54.00 42.00 70.00 42.00 70.00

THOMAPLAST® III - 2015 81

Fastening Elements

Screws

THOMAPLAST®-Slotted Mushroom Head Screw (NFE 25129) made of PP

Item

Technical specification

Thread length mm

Unit

External thread

piece

EURO

337015 337016 337017 337018 337019 337020 337021 337022 337023 337024 337025 337026 337027 337028 337029 337030 337031 337032

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

60 60 70 70 80 80 10 10 16 16 20 20 25 25 30 30 35 35

15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20

1.6 1.6 1.6 1.6 1.6 1.6 2 2 2 2 2 2 2 2 2 2 2 2

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

68.00 112.00 68.00 112.00 68.00 112.00 63.00 106.00 63.00 106.00 63.00 106.00 68.00 112.00 68.00 112.00 68.00 112.00

• Material: PP (polypropylene) • Colour: natural • Regulations: NFE 25129, NFE 27128

Item

Thread length mm

Unit

External thread

piece

EURO

336977 336978 336979 336980 336981 336982 336983 336984 336985 336986 336987 336988 336989 336990 336991 336992 336993 336994 336995 336996 336997 336998 336999 337000 337001 337002 337003 337004 337005 337006 337007 337008 337009 337010 337011 337012 337013 337014

8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50

12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

50.00 86.00 50.00 86.00 50.00 86.00 50.00 86.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 58.00 98.00 52.00 86.00 52.00 86.00 56.00 92.00 56.00 92.00 56.00 92.00 56.00 92.00 58.00 96.00 58.00 96.00 62.00 102.00 62.00 102.00

82 THOMAPLAST® III - 2015

Price

THOMAPLAST®-Slotted Mushroom Head Screw (NFE 25129) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: NFE 25129, NFE 27128

Item

Thread length mm

Unit

External thread

Price

piece

EURO

337033 337034 337035 337036 337037 337038 337039 337040 337041 337042 337043 337044 337045 337046 337047

M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8

6 6 8 8 10 10 12 12 16 16 20 20 8 8 10

10 10 10 10 10 10 10 10 10 10 10 10 12.5 12.5 12.5

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25

58.00 97.00 58.00 97.00 58.00 97.00 58.00 97.00 58.00 97.00 58.00 97.00 52.00 92.00 52.00

Fastening Elements Item

Screws

Thread length mm

Unit

External thread

Price

piece

EURO

337048 337049 337050 337051 337052 337053 337054 337055 337056 337057 337058 337059 337060 337061 337062 337063 337064 337065 337066 337067 337068 337069 337070 337071 337072 337073 337074 337077 337078 337079 337080 337081 337082 337083 337084 337091 337092 337093 337094 337095 337096 337097 337098 337099 337100 337101 337102

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 6.5 6.5 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 10 10 16 16 20 20 25 25 30 30 35 35

12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2 2 2 2 2 2 2 2 2 2 2 2

50 25 50 25 50 10 25 10 25 10 25 10 25 10 25 25 50 25 50 25 50 25 50 25 50 25 50 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 5 15 5 15

92.00 60.00 106.00 60.00 106.00 34.00 68.00 34.00 68.00 40.00 74.00 40.00 74.00 40.00 74.00 58.00 102.00 58.00 102.00 58.00 102.00 58.00 102.00 75.00 130.00 75.00 130.00 44.00 80.00 44.00 80.00 44.00 80.00 52.00 104.00 66.00 140.00 66.00 140.00 66.00 140.00 66.00 140.00 54.00 136.00 54.00 136.00

THOMAPLAST®-Mushroom Head Square Neck Bolt (DIN 603) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 603, NFE 27351

Item

Unit

External thread

Price

piece

EURO

305192 305193 305196 305197 305198 305199 305200 305201 305202 305203 305204 305205 305206 305207 305208 305209 305210 305211 305214 305215 305216 305217 305218 305219 305220 305221 332837 332838 305222 305223 332839 332840 305224 305225 305226 305227 332841 332842 305228 305229 332843 332844 305230 305231 305232

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25

16 16 20 20 26 26 30 30 35 35 40 40 45 45 50 50 16 16 20 20 26 26 30 30 35 35 40 40 45 45 50 50 55 55 60 60 70 70 80 80 90 90 16 16 18

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4.5 4.5 4.5

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 50 100 50

42.00 71.00 42.00 71.00 42.00 71.00 48.00 82.00 48.00 82.00 48.00 82.00 54.00 90.00 54.00 90.00 38.00 64.00 38.00 64.00 48.00 83.00 48.00 83.00 48.00 83.00 48.00 83.00 56.00 96.00 56.00 96.00 56.00 96.00 56.00 96.00 40.00 69.00 40.00 69.00 40.00 69.00 56.00 96.00 56.00

THOMAPLAST® III - 2015 83

Fastening Elements Item 305233 305664 305667 305234 305235 305236 305237 305238 305239 305240 305241 305242 305243 305670 305673 305244 305245 305246 305247 309316 309317 305248 305249 309332 309333 332845 332846 332849 332850 332853 332854 332855 332856 332857 332858 332859 332860 332861 332862 332863 332864 332865 332866 332867 332868 332869 332870 332871 332872 332873 332874 332875 332876 332877 332878

Screws

External thread

Unit

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

18 20 20 26 26 30 30 35 35 40 40 45 45 50 50 55 55 60 60 70 70 80 80 90 90 16 16 20 20 26 26 30 30 35 35 40 40 45 45 50 50 55 55 60 60 70 70 90 90 26 26 30 30 35 35

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 7.5 7.5 7.5 7.5 7.5 7.5

84 THOMAPLAST® III - 2015

Price

Item

piece

EURO

100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40 20 40 20 40 20 40 20 40 10 20 20 40 20 40 20 40

96.00 56.00 96.00 32.00 56.00 32.00 56.00 32.00 56.00 37.00 62.00 37.00 62.00 37.00 62.00 40.00 68.00 40.00 68.00 51.00 85.00 51.00 85.00 51.00 85.00 49.00 82.00 49.00 82.00 54.00 91.00 59.00 97.00 59.00 97.00 49.00 82.00 49.00 82.00 49.00 82.00 52.00 86.00 52.00 86.00 55.00 91.00 32.00 54.00 46.00 79.00 46.00 79.00 53.00 88.00

332879 332880 332881 332882 332883 332884 332885 332886 332887 332888 332889 332890 332891 332892 1

External thread

Unit

Price

piece

EURO

M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

40 40 45 45 50 50 55 55 60 60 70 70 90 90

10 10 10 10 10 10 10 10 10 10 10 10 10 10

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

20 40 20 40 20 40 10 20 10 20 10 20 10 20

53.00 88.00 53.00 88.00 51.00 91.00 30.00 50.00 30.00 50.00 38.00 60.00 38.00 60.00

Threat length = L - l1

THOMAPLAST®-Slotted Round Head Screw made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural

Item

Thread length mm

Unit

External thread

Price

piece

EURO

337973 337974 337975 337976 337977 337978 337979 337980 337981 337982 337983 337984 337985 337986 337987 337988 337989 337990 337991

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7

4 4 5 5 6 6 8 8 10 10 12 12 16 16 20 20 25 25 6

5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7

0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25

24.00 42.00 24.00 42.00 26.00 44.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 24.00

Fastening Elements Item

Screws

Thread length mm

Unit

Price

External thread

piece

EURO

337992 337993 337994 337995 337996 337997 337998 337999 338000 338001 338002 338003 338004 338005 338006 338007 338008 338009 338010 338011 338012 338013 338014 338015 338016 338017 338018 338019 338020 338021 338022 338023 338024 338025 338026 338027 338028 338029 338030

M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

6 8 8 10 10 12 12 16 16 20 20 8 8 10 10 12 12 16 16 20 20 6.5 6.5 8 8 10 10 12 12 16 16 20 20 22 22 25 25 30 30

7 7 7 7 7 7 7 7 7 7 7 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

1 1 1 1 1 1 1 1 1 1 1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

42.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 28.00 46.00 38.00 64.00 38.00 64.00 38.00 64.00 38.00 64.00 38.00 64.00 36.00 58.00 40.00 66.00 44.00 74.00 38.00 64.00

THOMAPLAST®-Slotted Knurled Thumb Screw made of PA

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural Item

Thread length mm

Unit

External thread

Price

piece

EURO

305594 305595 305596 305597 305598 305599 305600 305601 305602 305603 305604 305605 305606 305607 305608 305609 305610 305611 305612 305613 305614 305615 305616 305617 305618 305619 305620 305621 305622 305623 305624 305625 305626 305627 305628 305629 305630 305631 305632 305633 305634 305635 305636 305637 305638 305639

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

6 6 8 8 10 10 12 12 20 20 25 25 6 6 8 8 10 10 12 12 20 20 25 25 8 8 10 10 12 12 20 20 25 25 30 30 8 8 10 10 16 16 20 20 25 25

8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3

1 1 1 1 1 1 1 1 1 1 1 1 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

33.00 55.00 33.00 55.00 33.00 55.00 33.00 55.00 33.00 55.00 33.00 55.00 35.00 59.00 35.00 59.00 35.00 59.00 35.00 59.00 35.00 59.00 35.00 59.00 39.00 67.00 39.00 67.00 39.00 67.00 39.00 67.00 39.00 67.00 39.00 67.00 44.00 76.00 44.00 76.00 44.00 76.00 44.00 76.00 44.00 76.00

THOMAPLAST® III - 2015 85

Fastening Elements

Screws

THOMAPLAST®-Knurled Thumb Screw (DIN 654) made of PP

THOMAPLAST®-Knurled Thumb Screw (DIN 654) made of PVDF

Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 654

Item

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 654

Thread length mm

Unit

External thread

335341 335342 335343 335344 335345 335346 335347 335348 335349 335350 335351 335352 335353 335354 335355 335356 335357 335358 335359 335360 335361 335362 335363 335364 335365 335366 335367 335368 335371 335372 335373 335374 335375 335376 335377 335378 335379 335380

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 60 60

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4

86 THOMAPLAST® III - 2015

Price

Item

Thread length mm

Unit

External thread

piece

EURO

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

56.00 94.00 60.00 98.00 60.00 98.00 60.00 98.00 60.00 98.00 64.00 108.00 64.00 108.00 64.00 108.00 64.00 108.00 60.00 98.00 60.00 98.00 60.00 98.00 64.00 108.00 64.00 108.00 64.00 108.00 68.00 114.00 68.00 114.00 68.00 114.00 68.00 114.00

Price

piece

EURO

335381 335382 335383 335384 335385 335386 335387 335388 335389 335390 335391 335392 335393 335394 335395 335396 335397 335398 335399 335400 335401 335402 335403 335404 335405 335406 335407 335408 335409 335410 335411 335412 335413 335414 335415 335416 335417 335418

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 8 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 60 60

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

42.00 68.00 42.00 68.00 44.00 72.00 44.00 72.00 44.00 72.00 46.00 74.00 46.00 74.00 47.00 76.00 47.00 76.00 52.00 84.00 52.00 84.00 52.00 84.00 54.00 88.00 54.00 88.00 54.00 88.00 56.00 92.00 56.00 92.00 58.00 94.00 58.00 94.00

Fastening Elements

Screws

THOMAPLAST®-Crossed Pan Head Countersunk Head Screw (DIN 963) made of PC Product specification

• Crystal-clear screws • Ideal fastening elements for optically sophisticated applications that require a high stability and hardness • Can be used for signs, shelves, displays, technical parts etc. • Inflame and extinguish after removal of the ignition source, burn smoking (smell of phenol) • Chemical features: Resistant to many organic acids, mineral acids of high concentration, oxidants and reducing agents, fats and oils, neutral and acidic salt solutions, aliphatic and cycloaliphatic hydrocarbons and alcohols, except methanol; good resistance to most detergents and suds based on detergents; not resistant to aromatic hydrocarbons, halogens, ketones and alkalis. • Material specification of PC (polycarbonate): Crystal-clear, colourless and amorphous thermoplastic Suitable for use under the most extreme atmospheric conditions Polycarbonate is the most shatterproof glazing material today The impact strength is 250 times higher than that of glass of the same thickness The notch impact strength is 30 - 40 times higher than that of PMMA (acrylic glass) The excellent impact strength remains stable up to -40 °C High heat resistance Low creep Suitable for food Sterilizable, thus suitable for medical devices Although PC can be permanently cleaned in hot water and steam sterilized, a continuous use in water above +60 °C is not recommended, because the impact resistance is affected under these conditions. The transparency is 90 % at 1 mm thickness and 80 % at 10 mm; ultraviolet rays are almost completely absorbed.

Technical specification

• Material: PC (polycarbonate) • Colour: transparent, clear • Density: 1.2 g/cm3 (DIN 53479) • Temperature range: -100 to +135 °C (continuous use in the air) • Elastic modulus: 2,200 - 2,400 N/mm2 (DIN 53457) • Tensile strength: 55 - 75 N/mm2 • Pressure resistance: >80 N/mm2 • Ball pressure hardness: 100 - 110 N/mm2 (30-sec. value, DIN 53456) • Rockwell hardness R: 118 - 125 MPa (ASTM D 785) • Impact resistance: +20 °C: without break (DIN 53453) +100 °C: without break (DIN 53453) • Notch impact strength: at +20 °C: 20 - 30 kJ/m2 (DIN 53453) at -40 °C: 10 - 15 kJ/m2 (DIN 53453) • Notch impact strength (Izod): 800 - 850 J/m (ASTM D 256) • Thermal conductivity: 0.21 W/m x K (DIN 5261) • Flammability rating: UL 94 • Dielectric strength: 35 kV/mm (DIN 53481) • Volume resistivity: >1017 Ohm x cm (DIN 53482) • Surface resistance: >1015 Ohm (DIN 53482) • Comparative track. index (CTI): 255 - 300 (DIN 53480) • Dielectric constant: 2.9 at 1 Mhz (DIN 53483) • Regulations: similar to ISO 2009, DIN 963

Item

Thread length mm

Unit

External thread

Price

piece

EURO

314896 314897 314898 314899 314900 314901 314902 314903 314904 314905 314906 314907 314908 314909 314910 314911 314912 314913 314914 314915 314742 314743 314916 314917 314918 314919 314920 314921 314922 314923 314744 314745 314924 314925 314926 314927 314928 314929 314756 314757 314876 314877 314930 314931 314932

M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M2 x 0.4 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8

4 4 5 5 6 6 8 8 4 4 6.4 6.4 9 9 12.8 12.8 15 15 18 18 20 20 25 25 3.8 3.8 5.8 5.8 8 8 9.8 9.8 12 12 15 15 18 18 20 20 30 30 8.2 8.2 12.2

4 4 4 4 4 4 4 4 6 6 5.8 5.8 5.2 5.2 5.6 5.6 6 6 6 6 6 6 6 6 7.4 7.4 7.4 7.4 8 8 7.4 7.4 8 8 8 8 8 8 8 8 8 8 9.1 9.1 9.1

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25

24.00 31.00 24.00 31.00 24.00 31.00 24.00 31.00 24.00 31.00 24.00 31.00 24.00 31.00 25.00 32.00 37.00 46.00 47.00 58.00 48.00 60.00 56.00 71.00 26.00 32.00 26.00 32.00 27.00 34.00 27.00 34.00 36.00 46.00 49.00 61.00 51.00 64.00 47.00 59.00 35.00 44.00 29.00 37.00 29.00

THOMAPLAST® III - 2015 87

Fastening Elements Item

Screws Thread length mm

Unit

External thread

Price

Item

314933 314886 314887 314890 314891 314934 314935 314936 314937 314938 314939 314940 314941 314942 314943 314944 314945 314946 314947 314948 314949 314950 314951 314952 314953 314954 314955

12.2 15 15 30 30 10 10 15 15 20 20 25 25 30 30 35 35 10 10 15 15 20 20 25 25 30 30

9.1 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 16 16 16

piece

EURO

50 25 50 25 50 25 50 25 50 25 50 10 20 10 20 10 20 25 50 25 50 25 50 10 20 10 20

37.00 51.00 64.00 39.00 49.00 65.00 75.00 77.00 88.00 86.00 99.00 37.00 42.00 45.00 51.00 68.00 78.00 116.00 132.00 122.00 140.00 128.00 146.00 59.00 68.00 65.00 74.00

THOMAPLAST®-Hexagon Socket Countersunk Head Screw (DIN 7991) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 7991, NFE 27160

Item

External thread

Thread length mm

piece

EURO

333189 333190 333191 333192 333193 333194

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

8 8 11 11 13 13

50 100 50 100 50 100

40.00 69.00 40.00 69.00 40.00 69.00

88 THOMAPLAST® III - 2015

Unit

Price

External thread

Thread length mm

Unit

Price

piece

EURO

333195 333196 333197 333198 333199 333200 333201 333202 333203 333204 333205 333206 333207 333208 333209 333210 333211 333212 333213 333214 333215 333216 333217 333218 333219 333220 333221 333222 333223 333224 333225 333226 333227 333228 333229 333230 333231 333232 333233 333234 333235 333236 333237 333238 333239 333240 333241 333242 333243 333244 333245 333246 333247 333248 333249

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

17 17 21 21 25 25 30 30 35 35 40 40 50 50 11 11 13 13 15 15 17 17 21 21 25 25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 75 75 85 85 11 11 13 13 15 15 17 17 21 21 25

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

40.00 69.00 40.00 69.00 40.00 69.00 53.00 90.00 53.00 90.00 53.00 90.00 53.00 90.00 31.00 53.00 31.00 53.00 31.00 53.00 31.00 53.00 31.00 53.00 31.00 53.00 31.00 53.00 31.00 53.00 31.00 53.00 50.00 86.00 50.00 86.00 50.00 86.00 50.00 86.00 50.00 86.00 50.00 86.00 36.00 61.00 36.00 61.00 36.00 61.00 36.00 61.00 36.00 61.00 47.00

Fastening Elements Item 333250 333251 333252 333253 333254 333255 333256 333257 333258 333259 333260 333261 333262 333263 333264 333265 333266 333267 333268 333269 333270 333271 333272 333273 333274 333275 333276 333277 333278 333279 333280 333281 333282 333283 333284 333285 333286 333287 333288 333289 333290 333291 333292 333293 333294 333295 333296 333297 333298 333299 333300 333301 333302 333303 333304

Screws

External thread

Thread length mm

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 75 75 85 85 11 11 13 13 15 15 17 17 21 21 25 25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 85 85 22 22 25 25 30 30 35 35

Unit

Price

Item

piece

EURO

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

81.00 47.00 81.00 47.00 81.00 47.00 81.00 47.00 81.00 57.00 94.00 57.00 94.00 57.00 94.00 39.00 67.00 39.00 67.00 55.00 95.00 55.00 95.00 55.00 95.00 55.00 95.00 55.00 95.00 55.00 95.00 38.00 64.00 38.00 64.00 38.00 64.00 38.00 64.00 38.00 64.00 52.00 87.00 52.00 87.00 52.00 87.00 43.00 72.00 43.00 72.00 43.00 72.00 43.00 72.00

333305 333306 333307 333308 333309 333310 333311 333312 333313 333314 333315 333316

External thread

Thread length mm

Unit

Price

piece

EURO

M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

40 40 45 45 50 50 55 55 65 65 85 85

25 50 25 50 25 50 25 50 25 50 25 50

43.00 72.00 51.00 86.00 51.00 86.00 51.00 86.00 61.00 97.00 61.00 97.00

THOMAPLAST®-Slotted Countersunk Head Screw (DIN 963) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 963, ISO 2009, NFE 27113, NFE 25123

Item

Thread length mm

Unit

External thread

Price

piece

EURO

305310 305311 305312 305313 305314 305315 305316 305317 305318 305319 305320 305321 305322 305323 305324 305325 305328 305329 305330 305331 305332

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 6 6 8 8 10

1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 2.7 2.7 2.7 2.7 2.7

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 35.00 60.00 35.00 60.00 35.00

THOMAPLAST® III - 2015 89

Fastening Elements Item

Screws Thread length mm

Unit

External thread

305333 305334 305335 305336 305337 305338 305339 305340 305341 305342 305343 305348 305349 305350 305351 305352 305353 305354 305355 305356 305357 305358 305359 305360 305361 305362 305363 305364 305365

M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

10 12 12 16 16 20 20 25 25 30 30 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40

2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.5 2.5 2.5 2.5 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7

305366 305367 305368 305369 305370 305371 305372 305373 305374 305375 305376 305377 305378 305379 305380 305381

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

45 45 50 50 8 8 10 10 12 12 16 16 20 20 25 25

2.7 2.7 2.7 2.7 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3

90 THOMAPLAST® III - 2015

Price

Item

Thread length mm

Unit

External thread

piece

EURO

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 43.00 73.00 43.00 73.00 43.00 73.00 51.00 85.00 51.00 85.00

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

51.00 85.00 53.00 91.00 34.00 58.00 29.00 50.00 29.00 50.00 29.00 50.00 29.00 50.00 29.00 50.00

Price

piece

EURO

305382 305383 305384 305385 305386 305387 305388 305389 305390 305391 305804 305807 305392 305393 305640 305641 305394 305395 305396 305397 305398 305399 305400 305401 305402 305403 305404 305405 305406 305407 305408 305409 305410 305411 305412 305413 305414 305415 305416 305417 305418 305419 305420 305421 333035 333036 305422 305423 305424 305425 305426 305427 305428 305429 305430

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

30 30 35 35 40 40 45 45 50 50 55 55 65 65 75 75 85 85 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 75 75 85 85 10 10 12 12 16 16 20 20 25

3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 5 5 5 5 5 5 5 5 5

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25

29.00 50.00 35.00 59.00 35.00 59.00 35.00 59.00 35.00 59.00 38.00 64.00 38.00 64.00 50.00 85.00 50.00 85.00 41.00 70.00 41.00 70.00 41.00 70.00 47.00 80.00 47.00 80.00 57.00 96.00 57.00 96.00 57.00 96.00 34.00 58.00 34.00 58.00 34.00 58.00 36.00 61.00 45.00 76.00 45.00 76.00 32.00 54.00 32.00 54.00 32.00 54.00 35.00 59.00 35.00

Fastening Elements Item 305431 305432 305433 333039 333040 305434 305435 333041 333042 305436 305437 333043 333044 305438 305439 305440 305441 333045 333046 333047 333048 333049 333050 333051 333052 333053 333054 333055 333056 333057 333058 333059 333060 333061 333062 333063 333064

Screws

External thread

Thread length mm

Unit

Price

Item

M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 85 85 22 22 26 26 31 31 36 36 41 41 46 46 51 51 56 56 66 66 86 86

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8

piece

EURO

50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 20

59.00 42.00 72.00 42.00 72.00 42.00 72.00 46.00 77.00 46.00 77.00 46.00 77.00 49.00 83.00 60.00 99.00 44.00 74.00 44.00 74.00 50.00 84.00 50.00 84.00 52.00 86.00 52.00 86.00 59.00 97.00 59.00 97.00 46.00 84.00 30.00 52.00

THOMAPLAST®-Slotted Countersunk Head Screw (DIN 963) made of PP Technical specification

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 963, ISO 2009

Thread length mm

Unit

External thread

Price

piece

EURO

336061 336062 336063 336064 336065 336066 336067 336068 336069 336070 336071 336072 336075 336076 336077 336078 336079 336080 336081 336082 336083 336084 336085 336086 336087 336088 336089 336090 336091 336092 336093 336094 336095 336096 336097 336098 336099 336100 336101 336102 336103 336104 336105 336106 336107 336108 336109 336110 336111 336112 336113 336114 336115 336116 336117

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

8 8 11 11 13 13 15 15 17 17 21 21 25 25 30 30 35 35 40 40 50 50 65 65 8 8 11 11 13 13 17 17 21 21 25 25 30 30 40 40 50 50 65 65 17 17 21 21 25 25 30 30 40 40 50

9.2 9.2 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3

2.5 2.5 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25

48.00 82.00 48.00 82.00 48.00 82.00 48.00 82.00 48.00 82.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 54.00 90.00 60.00 98.00 60.00 98.00 60.00 98.00 68.00 114.00 68.00 114.00 68.00 114.00 68.00 114.00 68.00 114.00 76.00

THOMAPLAST® III - 2015 91

Fastening Elements Item

Screws

Thread length mm

Unit

External thread

Price

Item

336118 336119 336120 336121 336122 336123 336124 336125 336126 336127 336128 336129 336130 336131 336132 336133 336134

M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

50 65 65 21 21 25 25 30 30 35 35 40 40 50 50 65 65

17.3 17.3 17.3 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

4.7 4.7 4.7 5 5 5 5 5 5 5 5 5 5 5 5 5 5

piece

EURO

50 25 50 10 25 10 25 10 25 10 25 10 25 10 25 10 25

128.00 76.00 128.00 76.00 128.00 80.00 136.00 80.00 136.00 80.00 136.00 88.00 146.00 88.00 146.00 88.00 146.00

THOMAPLAST®-Slotted Countersunk Head Screw (DIN 963) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 963, ISO 2009, NFE 25123

Item

Thread length mm

Unit

External thread

piece

EURO

336211 336212 336213 336214 336215 336216 336217 336218 336219 336220 336223 336224 336225 336226 336227 336228

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

8 8 11 11 13 13 15 15 17 17 21 21 25 25 30 30

9.2 9.2 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

46.00 74.00 46.00 74.00 46.00 74.00 46.00 74.00 46.00 74.00 48.00 78.00 48.00 78.00 54.00 88.00

92 THOMAPLAST® III - 2015

Price

Thread length mm

Unit

External thread

Price

piece

EURO

336231 336232 3362331 3362341 3362351 336236 336237 336238 336239 336240 3362411 3362421 336243 336244 336245 336246 336247 336248 336249 336250 336251 336252 336253 336254 336255 336256 336257 336258 336259 336260 336261 336262 336263 336264 336265 336266 336267 336268 336269 336270 336271 336272 336273 336274 336275 336276 336277 336278 336279 336280 336281 336282 336283 336284

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

40 40 50 50 65 65 8 8 11 11 13 13 17 17 21 21 25 25 30 30 40 40 50 50 60 60 17 17 21 21 25 25 30 30 40 40 50 50 65 65 21 21 25 25 30 30 35 35 40 40 50 50 60 60

10.4 10.4 10.4 10.4 10.4 10.4 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.3 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 25 10 25 10 25 10 25 10 25 10 25 10 25

54.00 88.00 54.00 88.00 54.00 88.00 70.00 116.00 70.00 116.00 70.00 116.00 70.00 116.00 74.00 120.00 74.00 120.00 74.00 120.00 80.00 130.00 80.00 130.00 80.00 130.00 80.00 130.00 80.00 130.00 86.00 140.00 86.00 140.00 86.00 140.00 86.00 140.00 86.00 140.00 62.00 130.00 64.00 136.00 64.00 136.00 64.00 136.00 68.00 143.00 68.00 143.00 68.00 143.00

Fastening Elements

Screws

THOMAPLAST®-Slotted Countersunk Head Screw (DIN 963) made of PTFE Technical specification

• Material: PTFE (polytetrafluoroethylene) • Colour: milky white • Regulations: similar to DIN 963, DIN EN ISO 2009

Item

Thread length mm

Unit

External thread

Price

piece

EURO

310128 310129 310140 310141 310142 310143 310148 310149 310150 310151

M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5

30 30 30 30 30 30 40 40 40 40

8.4 8.4 9.3 9.3 11.3 11.3 15.8 15.8 18.3 18.3

1 5 1 5 1 5 1 5 1 5

24.00 105.00 24.00 105.00 26.00 117.00 27.00 120.00 29.00 130.00

THOMAPLAST®-Slotted Raised Countersunk Head Screw (DIN 964) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 964, ISO 2010, NFE 27115, NFE 25124

Item

External thread

Thread length mm

Unit

Price

piece

EURO

305442 305443 305444 305445 305446

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5

6 6 8 8 10

50 100 50 100 50

32.00 54.00 32.00 54.00 32.00

Item

External thread

Thread length mm

Unit

Price

piece

EURO

305447 305448 305449 305450 305451 305452 305453 305454 305455 305456 305457 305458 305459 305460 305461 305462 305463 305464 305465 305466 305467 305468 305469 305470 305471 305472 305473 305474 305475 305476 305477 305478 305479 305480 305481 305482 305483 305484 305485 305486 305487 305488 305489 305490 305491 305492 305493 305494 305495 305496 305497 305498 305499 305500 305501

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

10 12 12 16 16 20 20 25 25 30 30 35 35 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 35.00 60.00 43.00 73.00 43.00 73.00 43.00 73.00 51.00 85.00 51.00 85.00 51.00 85.00 53.00 91.00

THOMAPLAST® III - 2015 93

Fastening Elements Item

Screws

External thread

Thread length mm

305502 305503 305504 305505 305506 305507 305508 305509 305510 305511 305512 305513 305514 305515 305516 305517 305518 305519 305520 305521 305522 305523 333071 333072 305524 305525 333073 333074 305526 305527 305528 305529 305530 305531 305532 305533 305534 305535 305536 305537 305538 305539 305540 305541 305542 305543 305544 305545 305546 305547 305548 305549 305550 305551 305552

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

8 8 11 11 13 13 17 17 21 21 25 25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 75 75 85 85 11 11 13 13 17 17 21 21 25 25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 75

94 THOMAPLAST® III - 2015

Unit

Price

Item

piece

EURO

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25

34.00 58.00 29.00 50.00 29.00 50.00 29.00 50.00 29.00 50.00 29.00 50.00 29.00 50.00 35.00 59.00 35.00 59.00 35.00 59.00 35.00 59.00 38.00 64.00 38.00 64.00 50.00 85.00 50.00 85.00 41.00 70.00 41.00 70.00 41.00 70.00 47.00 80.00 47.00 80.00 57.00 96.00 57.00 96.00 57.00 96.00 34.00 58.00 34.00 58.00 34.00 58.00 36.00 61.00 45.00

305553 333077 333078 305554 305555 305556 305557 305558 305559 305560 305561 305562 305563 305564 305565 333081 333082 305566 305567 333083 333084 305568 305569 333085 333086 305570 305571 305572 305573 333087 333088 333089 333090 333091 333092 333093 333094 333095 333096 333097 333098 333099 333100 333101 333102 333103 333104 333105 333106

External thread

Thread length mm

Unit

Price

piece

EURO

M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

75 85 85 11 11 13 13 17 17 21 21 25 25 30 30 35 35 40 40 45 45 50 50 55 55 65 65 85 85 22 22 26 26 31 31 36 36 41 41 46 46 51 51 56 56 66 66 86 86

50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 10 20

76.00 45.00 76.00 32.00 54.00 32.00 54.00 32.00 54.00 35.00 59.00 35.00 59.00 42.00 72.00 42.00 72.00 42.00 72.00 46.00 77.00 46.00 77.00 46.00 77.00 49.00 83.00 60.00 99.00 44.00 74.00 44.00 74.00 50.00 84.00 50.00 84.00 52.00 86.00 52.00 86.00 59.00 97.00 59.00 97.00 46.00 84.00 30.00 52.00

Fastening Elements

Screws

THOMAPLAST®-Slotted Raised Countersunk Head Screw (DIN 964) made of PP Technical specification

Item

Thread length mm

Unit

Price

External thread

piece

EURO

336359 336360 336361 336362 336363 336364

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

30 30 40 40 50 50

14.5 14.5 14.5 14.5 14.5 14.5

4 4 4 4 4 4

• Material: PP (polypropylene) • Colour: natural • Regulations: DIN 964, ISO 2010

50 84.00 100 146.00 50 84.00 100 146.00 50 84.00 100 146.00

THOMAPLAST®-Slotted Raised Countersunk Head Screw (DIN 964) made of PVDF Technical specification

• Material: PVDF (polyvinylidene fluoride) • Colour: natural, slightly translucent • Regulations: DIN 964, ISO 2010

Item

Thread length mm

Unit

External thread

Price

piece

EURO

336321 336322 336323 336324 336325 336326 336327 336328 336329 336330 336331 336332 336333 336334 336335 336336 336337 336338 336339 336340 336341 336342 336343 336344 336345 336346 336347 336348 336349 336350 336351 336352 336353 336354 336355 336356 336357 336358

8 8 11 11 15 15 17 17 21 21 25 25 30 30 40 40 50 50 8 8 13 13 17 17 21 21 25 25 30 30 40 40 50 50 21 21 25 25

9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 14.5 14.5 14.5 14.5

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

56.00 96.00 56.00 96.00 56.00 96.00 56.00 96.00 56.00 96.00 60.00 102.00 60.00 102.00 60.00 102.00 62.00 108.00 62.00 108.00 62.00 108.00 62.00 108.00 62.00 108.00 62.00 108.00 62.00 108.00 68.00 116.00 68.00 116.00 76.00 134.00 76.00 134.00

Item

Thread length mm

Unit

External thread

Price

piece

EURO

336401 336402 336403 336404 336405 336406 336407 336408 336409 336410 336411 336412 336413 336414 336415 336416 336417 336418 336419 336420 336421 336422 336423 336424 336425 336426 336427

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

8 8 11 11 15 15 17 17 21 21 25 25 30 30 40 40 50 50 8 8 13 13 17 17 21 21 25

9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 11 11 11 11 11 11 11 11 11

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25

46.00 74.00 46.00 74.00 46.00 74.00 46.00 74.00 48.00 78.00 48.00 78.00 54.00 88.00 54.00 88.00 54.00 88.00 70.00 116.00 70.00 116.00 70.00 116.00 74.00 120.00 74.00

THOMAPLAST® III - 2015 95

Fastening Elements Item

Screws

Thread length mm

Unit

Price

External thread

piece

EURO

336428 336429 336430 336431 336432 336433 336434 336435 336436 336437 336438 336439 336440 336441 336442 336443 336444

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

25 30 30 40 40 50 50 21 21 25 25 30 30 40 40 50 50

11 11 11 11 11 11 11 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5

3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4

50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

120.00 74.00 120.00 80.00 130.00 80.00 130.00 80.00 130.00 86.00 140.00 86.00 140.00 86.00 140.00 86.00 140.00

THOMAPLAST®-Connecting Screw made of HDPE Product specification

• Ideally suited for binding colour guides, pattern books, loose-leaf albums and catalogs • Also usable as connecting elements in furniture and plate constructions • Antiadhesive surface • High tearing strength • Excellent impact resistance, even at low temperatures • Physiologically safe • Chemical features: Good resistance to weak and strong alkalis and acids, except oxidizing acids, and only relatively suitable for hydrofluoric acid; resistant to organic acids, aliphatic hydrocarbons, greases and mineral oils, alcohols, ketones, esters and amines; limited resistance to fuels, aromatic and chlorinated hydrocarbons, ethers and aldehydes; not resistant to unsaturated chlorinated hydrocarbons, not suitable for use with dry halogens and turpentine. • Material specification: Good dielectrical properties Very low tendency to swell when in contact with polar fluids, resistant to hydrolysis. Due to its chemical properties, the bonding of PE requires special adhesives. Resistance to weather: the material degrades when exposed to direct sunlight

96 THOMAPLAST® III - 2015

Technical specification

• Material: HDPE (polyethylene, rigid, high density) • Colour: alternatively black or white • Density: 0.95 g/cm3 • Temperature range: -50 to +85 °C, for a short time +100 °C • Elastic modulus: 700 - 1,400 N/mm2 • Tensile strength: 18 - 35 N/mm2 • Tearing strength: 25 - 32 MPa (DIN 53455) • Elongation at break: 100 - 1,000 % (DIN 53455) • Ball pressure hardness: 35 - 55 N/mm2 (DIN 53456) • Impact resistance: +20 °C: without break (DIN 53453); -40 °C: 350 kJ/m2 (DIN 53448) • Surface resistance: 1014 Ohm (DIN 53482) • Volume resistivity: >1017 Ohm x cm (DIN 53482) • Dielectric strength: 65 - 70 kV/mm at 0.4 mm thickness (DIN 53481) • Dielectric constant: approx. 2.4 at 50 Hz • Water absorption: <0.1 % (ISO 62) • Flammability rating: UL 94 HB • Dimensions: head Ø: 12.0 mm; head thickness: 2.5 mm; shaft Ø: 5.0 mm Item

Thread length mm

Colour

Unit

External thread

Price

piece

EURO

306236 306237 305642 305643 306238 306239 305644 305645 306240 306241 305646 305647 306242 306243 305648 305649 306244 306245 305650 305651 306246 306247 305652 305653 306248 306249 305654 305655 306250 306251 306232 306233 306252 306253 306270 306271 306254

6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 16 16 16 16 20 20 20 20 25 25 25 25 30 30 30 30 35 35 35 35 40

white white black black white white black black white white black black white white black black white white black black white white black black white white black black white white black black white white black black white

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40 20

52.00 86.00 52.00 86.00 52.00 86.00 52.00 86.00 52.00 86.00 52.00 86.00 59.00 98.00 59.00 98.00 59.00 98.00 59.00 98.00 59.00 98.00 59.00 98.00 59.00 98.00 59.00 98.00 59.00 98.00 59.00 98.00 56.00 93.00 56.00 93.00 56.00

Fastening Elements Item

Screws Thread length mm

Colour

Unit

External thread

Price

Item

306255 306288 306289 306256 306257 306290 306291 306258 306259 306312 306313 306260 306261 306739 306741 306262 306263 306743 306745 306264 306265 306747 306749 306266 306267 306268 306269

40 40 40 45 45 45 45 50 50 50 50 55 55 55 55 60 60 60 60 65 65 65 65 70 70 70 70

white black black white white black black white white black black white white black black white white black black white white black black white white black black

piece

EURO

40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40

93.00 56.00 93.00 56.00 93.00 56.00 93.00 56.00 93.00 56.00 93.00 54.00 96.00 54.00 96.00 54.00 96.00 54.00 96.00 54.00 96.00 54.00 96.00 54.00 96.00 54.00 96.00

THOMAPLAST®-Wing Screw (DIN 316) made of PA rounded wings Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 316

Item

External thread

Thread length mm

Unit

Price

piece

EURO

333107 333108 305574 305575 305576 305577

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8

6 6 10 10 16 16

25 50 25 50 25 50

31.00 53.00 31.00 53.00 31.00 53.00

External thread

Thread length mm

Unit

Price

piece

EURO

305578 305579 305580 305581 305582 305583 333109 333110 333111 333112 305584 305585 333113 333114 305586 305587 305588 305589 305590 305591 305592 305593 333115 333116 333117 333118 333119 333120 333121 333122 333123 333124 333125 333126 333127 333128 333129 333130 333131 333132 333133 333134 333135 333136 333137 333138 333139 333140 333141 333142 333143 333144 333145 333146 333147

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

20 20 25 25 30 30 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40

25 50 25 50 25 50 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25

42.00 72.00 42.00 72.00 42.00 72.00 50.00 86.00 50.00 86.00 50.00 86.00 50.00 86.00 50.00 86.00 33.00 55.00 33.00 55.00 33.00 55.00 33.00 55.00 37.00 62.00 37.00 62.00 37.00 62.00 37.00 62.00 55.00 91.00 55.00 91.00 49.00 83.00 49.00 83.00 49.00 83.00 49.00 83.00 57.00 96.00 57.00 96.00 57.00 96.00 57.00 96.00 59.00 99.00 59.00

THOMAPLAST® III - 2015 97

Fastening Elements Item

Screws Thread length mm

Unit

Price

External thread

piece

EURO

333148 333149 333150 333151 333152 333153 333154 333155 333156 333157 333158 333159 333160 333161 333162 333163 333164 333165 333166 333167 333168 333169 333170 333171 333172 333173 333174 333175 333176 333177 333178 333179 333180 333181 333182 333183 333184 333185 333186 333187 333188

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

40 45 45 50 50 60 60 70 70 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 80 80

50 25 50 20 40 20 40 10 20 10 20 20 40 20 40 20 40 20 40 20 40 20 40 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20

99.00 59.00 99.00 51.00 84.00 51.00 84.00 33.00 65.00 33.00 65.00 56.00 92.00 56.00 92.00 56.00 92.00 56.00 92.00 56.00 92.00 56.00 92.00 32.00 52.00 32.00 52.00 32.00 52.00 32.00 52.00 32.00 52.00 43.00 71.00 43.00 71.00 43.00 71.00 43.00 71.00

THOMAPLAST®-Wing Screw made of PA edged wings

98 THOMAPLAST® III - 2015

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: white Item

External thread

Thread length mm

Unit

Price

piece

EURO

306080 306081 306082 306083 306084 306085 306086 306087 306088 306089 306090 306091 306092 306093 306094 306095 306118 306119 306096 306097 333393 333394 306098 306099 306100 306101 333395 333396 333397 333398 333399 333400 333401 333402 333403 333404 333405 333406 333407 333408 333409 333410 333411 333412 333413 333414 333415 333416 333417 333418 333419 333420

6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40 20 40 20 40 20 40

38.00 65.00 38.00 65.00 38.00 65.00 38.00 65.00 38.00 65.00 40.00 67.00 40.00 67.00 40.00 67.00 47.00 80.00 47.00 80.00 47.00 80.00 47.00 80.00 47.00 80.00 53.00 88.00 53.00 88.00 56.00 94.00 56.00 94.00 56.00 94.00 56.00 94.00 56.00 94.00 56.00 94.00 46.00 81.00 46.00 81.00 46.00 81.00 46.00 81.00 48.00 86.00

Fastening Elements Item

Screws

External thread

Thread length mm

333421 333422 333423 333424 333425 333426 333427 333428 333429 333430 333431 333432 333433 333434 333435 333436 333437 333438 333439 333440 333441 333442 333443 333444 333445 333446 333447 333448 333449 333450 333451 333452 333453 333454 333455 333456 333457 333458

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

50 50 60 60 70 70 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 80 80

Unit

Price

Item

piece

EURO

20 40 20 40 10 20 10 20 20 40 20 40 20 40 20 40 20 40 20 40 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20 10 20

48.00 86.00 48.00 86.00 34.00 56.00 34.00 56.00 52.00 94.00 52.00 94.00 52.00 94.00 52.00 94.00 52.00 94.00 52.00 94.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 32.00 54.00 46.00 75.00 46.00 75.00

THOMAPLAST®-Wing Screw made of PA simple wings Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: white

External thread

Thread length mm

Unit

Price

piece

EURO

306286 306287 306292 306293 306294 306295 306296 306297 306298 306299 305656 305657 305658 305659 306300 306301 306302 306303 306304 306305 306306 306307 306272 306273 306274 306275 306278 306279 306282 306283 306284 306285 333495 333496 333499 333500 333501 333502 333503 333504 333505 333506 333507 333508 333509 333510 333511 333512 333513 333514 333515 333516 333519 333520 333521

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

6 6 10 10 12 12 15 15 20 20 6 6 8 8 10 10 12 12 15 15 20 20 25 25 30 30 40 40 50 50 60 60 80 80 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 50 50 60

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25

55.00 94.00 55.00 94.00 55.00 94.00 55.00 94.00 55.00 94.00 30.00 51.00 30.00 51.00 30.00 51.00 30.00 51.00 30.00 51.00 30.00 51.00 36.00 62.00 36.00 62.00 36.00 62.00 41.00 70.00 41.00 70.00 55.00 93.00 46.00 78.00 46.00 78.00 46.00 78.00 46.00 78.00 56.00 96.00 56.00 96.00 56.00 96.00 33.00 56.00 33.00 56.00 38.00 65.00 38.00

THOMAPLAST® III - 2015 99

Fastening Elements Item 333522 333523 333524 333525 333526 333529 333530 333531 333532 333533 333534 333535 333536 333537 333538 333541 333542 333545 333546 333549 333550 333551 333552 333553 333554 333561 333562 333563 333564 333567 333568 333571 333572 333575 333576 333577 333578 333579 333580

Screws

External thread

Thread length mm

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

60 70 70 80 80 8 8 10 10 12 12 16 16 20 20 30 30 40 40 50 50 60 60 80 80 16 16 20 20 30 30 40 40 50 50 60 60 80 80

Unit

Price

Item

piece

EURO

50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 25 50 25 50 25 50 25 50 20 40 20 40 20 40

65.00 49.00 83.00 49.00 83.00 34.00 58.00 34.00 58.00 34.00 58.00 34.00 58.00 38.00 66.00 43.00 73.00 43.00 73.00 48.00 82.00 54.00 90.00 51.00 84.00 44.00 75.00 44.00 75.00 52.00 88.00 59.00 98.00 49.00 81.00 53.00 90.00 53.00 90.00

THOMAPLAST®-Triangular Head Screw made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: white

100 THOMAPLAST® III - 2015

External thread

Thread length mm

Unit

Price

piece

EURO

306308 306309 306310 306311 306314 306315 306316 306317 306318 306319 306320 306321 305660 305661 305662 305663 306322 306323 306324 306325 306326 306327 306328 306329 333581 333582 333583 333584 333585 333586 333587 333588 333589 333590 333591 333592 333593 333594 333595 333596 333597 333598 333599 333600 333601 333602 333603 333604 333605 333606 333607 333608 333609 333610 333611

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

6 6 8 8 10 10 12 12 16 16 20 20 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

49.00 84.00 49.00 84.00 55.00 94.00 52.00 90.00 52.00 90.00 56.00 95.00 30.00 50.00 30.00 50.00 30.00 50.00 30.00 50.00 30.00 50.00 34.00 57.00 34.00 57.00 34.00 57.00 34.00 57.00 34.00 57.00 41.00 69.00 41.00 69.00 41.00 69.00 54.00 93.00 54.00 93.00 44.00 75.00 44.00 75.00 44.00 75.00 44.00 75.00 52.00 89.00 52.00 89.00 52.00

Fastening Elements Item

Grub Slotted Screws and Threaded Rods

External thread

Thread length mm

333612 333613 333614 333615 333616 333617 333618 333619 333620 333621 333622 333623 333624 333625 333626 333627 333628

M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

25 30 30 35 35 40 40 45 45 50 50 60 60 70 70 80 80

Unit

Price

Item

piece

EURO

100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

89.00 32.00 54.00 32.00 54.00 32.00 54.00 38.00 65.00 38.00 65.00 38.00 65.00 49.00 83.00 49.00 83.00

Grub Slotted Screws and Threaded Rods THOMAPLAST®-Grub Slotted Screw (DIN 551) made of PA Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 551, ISO 4766, NFE 27110, NFE 24766

Item

External thread

Thread length mm

Unit

Price

piece

EURO

306102 306103 306104 306105 306106 306107 306108 306109 306110 306111 306112 306113

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5

8 8 10 10 12 12 16 16 20 20 25 25

50 100 50 100 50 100 50 100 50 100 50 100

31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00

External thread

Thread length mm

Unit

Price

piece

EURO

306114 306115 306116 306117 306122 306123 306124 306125 306126 306127 306128 306129 306130 306131 306132 306133 306134 306135 306136 306137 305765 305921 306138 306139 306140 306141 306142 306143 306144 306145 306146 306147 306148 306149 306150 306151 306152 306153 306154 306155 306156 306157 306158 306159 306160 306161 306162 306163 306164 306165 306166 306167 306168 306169 306170

M3 x 0.5 M3 x 0.5 M3 x 0.5 M3 x 0.5 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1

30 30 35 35 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 6 6 8 8 10 10 12 12 16

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 35.00 59.00 35.00 59.00 35.00 59.00 35.00 59.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 38.00 65.00 38.00 65.00 38.00 65.00 38.00 65.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00 55.00 31.00

THOMAPLAST® III - 2015 101

Fastening Elements Item

Grub Slotted Screws and Threaded Rods

External thread

Thread length mm

306171 306172 306173 306174 306175 306176 306177 333459 333460 306178 306179 333461 333462 306180 306181 306182 306183 306184 306185 306186 306187 306188 306189 306190 306191 306192 306193 306194 306195 306196 306197 306198 306199 306200 306201 306202 306203 306204 306205 333463 333464 306206 306207 306208 306209 306210 306211 306212 306213 306214 306215 306216 306217 306218 306219

M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5

16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 6 6 8 8 10 10 12 12

102 THOMAPLAST® III - 2015

Unit

Price

Item

piece

EURO

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50

55.00 31.00 55.00 31.00 55.00 31.00 55.00 37.00 68.00 37.00 68.00 37.00 68.00 37.00 68.00 37.00 68.00 49.00 84.00 36.00 61.00 36.00 61.00 36.00 61.00 36.00 61.00 36.00 61.00 36.00 61.00 46.00 78.00 46.00 78.00 46.00 78.00 46.00 78.00 55.00 93.00 55.00 93.00 55.00 93.00 38.00 66.00 34.00 56.00 34.00 56.00 34.00 56.00 34.00 56.00

306220 306221 306222 306223 306224 306225 333465 333466 306226 306227 306228 306229 333467 333468 334369 333470 333471 333472 333473 333474 306234 306235 333475 333476 333477 333478 333479 333480 333481 333482 333483 333484 333485 333486 333487 333488 333489 333490 333491 333492

External thread

Thread length mm

Unit

Price

piece

EURO

M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 20 40 20 40

34.00 56.00 34.00 56.00 42.00 72.00 42.00 72.00 42.00 72.00 42.00 72.00 48.00 81.00 48.00 81.00 48.00 81.00 59.00 99.00 49.00 83.00 49.00 83.00 49.00 83.00 49.00 83.00 49.00 83.00 55.00 91.00 55.00 91.00 55.00 91.00 51.00 91.00 51.00 91.00

THOMAPLAST®-Hex Socket Grub Screw (DIN 913) made of PA

Fastening Elements

Grub Slotted Screws and Threaded Rods

Technical specification

Item

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Regulations: DIN 913, ISO 4026, NFE 27180 Item

Thread length mm

WAF

Unit

External thread

Price

piece

EURO

333319 333320 333321 333322 333323 333324 333325 333326 333327 333328 333329 333330 333331 333332 333333 333334 333335 333336 333337 333338 333339 333340 333341 333342 333343 333344 333345 333346 333347 333348 333349 333350 333351 333352 333353 333354 305704 305705 305706 305707 305708 305709 305710 305711 305712 305713 305714 305715 305716 305717 305718

M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25 M8 x 1.25

6 6 8 8 10 10 16 16 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 35.00 61.00 35.00 61.00 35.00 61.00 35.00 61.00 35.00 61.00 35.00 61.00 49.00 84.00 49.00 84.00 38.00 64.00 38.00 64.00 38.00 64.00 38.00 64.00 38.00 64.00 38.00 64.00 48.00 81.00 48.00

305719 305720 305721 305702 305703 305722 305723 306066 306067 306068 306069 306070 306071 306072 306073 306074 306075 306076 306077 306078 306079 333355 333356 333357 333358 333359 333360 333361 333362 333363 333364 333365 333366 333367 333368 333369 333370 333371 333372 333373 333374 333375 333376 333377 333378 333379 333380 333381 333382 333383 333384 333385 333386 333387 333388

External thread

Thread length mm

WAF

Unit

Price

piece

EURO

35 40 40 45 45 50 50 60 60 80 80 6 6 8 8 10 10 12 12 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50 60 60 80 80 16 16 20 20 25 25 30 30 35 35 40 40 45 45 50 50

4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

100 50 100 50 100 50 100 50 100 25 50 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

81.00 48.00 81.00 48.00 81.00 55.00 93.00 55.00 93.00 38.00 66.00 57.00 98.00 57.00 98.00 57.00 98.00 57.00 98.00 34.00 59.00 34.00 59.00 34.00 59.00 42.00 71.00 42.00 71.00 42.00 71.00 48.00 81.00 48.00 81.00 48.00 81.00 57.00 94.00 43.00 73.00 43.00 73.00 47.00 78.00 47.00 78.00 52.00 86.00 52.00 86.00 52.00 86.00 59.00 99.00

THOMAPLAST® III - 2015 103

Fastening Elements Item 333389 333390 333391 333392

Grub Slotted Screws and Threaded Rods

External thread

Thread length mm

WAF

Unit

Price

Item

M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75

60 60 80 80

6 6 6 6

piece

EURO

25 50 20 40

59.00 99.00 51.00 91.00

306336 306337 306338 306339 306340 306341 306342 306343 306344 306345 306346 306347 306348 306349 306350 306351 306352 306353

THOMAPLAST®-Threaded Rod (DIN 975) made of PA without Slot Application area

• High-quality technical plastic for insulations and corrosion protection in the areas of electrical engineering, chemical industry, vehicle construction, apparatus construction and building industry.

Product specification

• Comparable to threaded pins DIN 551, but without slot and without tip • ISO threaded rods with metric thread • Remarkable mechanical stability • Very high wear resistance • Good coefficient of sliding friction • Best fatigue resistance • Very good temperature resistance

Technical specification

• Material: PA 6.6 (polyamide 6.6) • Colour: natural • Shore hardness D: 80° - 85° (DIN 53505) • Temperature range: -40 to +155 °C, for a short time +200 °C • Thermal conductivity: 0.24 W/K x m • Density: 1.14 - 1.15 g/cm3 • Tensile strength: 62 - 83 N/mm2 • Bending strength: 86 - 97 N/mm2 • Volume resistivity: 1013 Ohm x cm • Dielectric strength: >12 kV/mm • Regulations: DIN 975, NFE 25136

Price

piece

EURO

M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M14 x 2 M14 x 2 M16 x 2 M16 x 2 M18 x 2.5 M18 x 2.5 M20 x 2.5 M20 x 2.5 M24 x 3 M24 x 3 M30 x 3.5 M30 x 3.5

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10

70.00 130.00 76.00 140.00 76.00 140.00 104.00 190.00 116.00 214.00 132.00 240.00 168.00 308.00 228.00 308.00 334.00 556.00

• Laboratory technology, electroplating technology, electrical engineering

Product specification:

External thread

Thread length mm

piece

EURO

300659 306330 306331 300660 306332 306333 300661 306334 306335 300662

M4 x 0.7 M4 x 0.7 M4 x 0.7 M5 x 0.8 M5 x 0.8 M5 x 0.8 M6 x 1 M6 x 1 M6 x 1 M8 x 1.25

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

1 5 10 1 5 10 1 5 10 1

34.00 86.00 158.00 34.00 70.00 130.00 34.00 70.00 130.00 34.00

104 THOMAPLAST® III - 2015

Unit

THOMASTABIL®-Threaded Rod made of Glass Fiber Reinforced Plastic GFRP

Unit

Thread length mm

Application area:

Item

External thread

Price

Fastening Elements

Grub Slotted Screws and Threaded Rods

Technical specification:

• Material: Resin: epoxy Reinforcing fibers: glass fibers • Design: ground • Color: natural • Density: 2 g/cm3 • Temperature range: -100 to +155 °C, for a short time +180 °C • Impact toughness (IZOD): 300 kJ/m2 • Interlaminar shear strength: 25 MPa • Volume resistivity: 1010 - 1015 Ohm * cm • Surface resistance: 1010 - 1015 Ohm • Breakdown strength: 5 - 10 kV/mm • Comparative tracking index (CTI): KA 3c / KB 500 / KC 600 • Dielectric constant: <5 • Coefficient of linear thermal expansion: 12 x 10-6 1/K • Thermal conductivity: 0.2 - 0.6 W/m * K • Specific heat capacity: 1.0 - 1.2 kJ/kg * K • Water absorption: 0.15 % • Dimensional stability by Martens method: +200 °C • Resistance to glow heat: level 2b • Elongation at break: 1.0 - 1.8 % • Barcol hardness: >40 • Tolerances diameter: 0 - 10 mm ±0.20 mm, 10 - 20 mm ±0.30 mm, 20 - 40 mm ±0.35 mm • Fire class: B2, UL94 V-1, UL 94 V-0, DIN 5510 S4 SR2, ST2, ASTM E84 < 25, ASTM D635 All following measured values are depending on the test direction: parallel (II) or perpendicular (+) to the fibers. • Tensile strength: II: 250 MPa; +: 30-80 MPa • Tension stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 20 MPa (short-term); 15 MPa (long-term) • Bending strength: II: 250 MPa; +: 30-80 MPa • Bending stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 20 MPa (short-term); 15 MPa (long-term) • Elastic modulus tensile strength: II: 23.000 MPa; +: 8.000 MPa • Elastic modulus bending: II: 25.000 MPa; +: 9.000 MPa • Compressive strength: II: 450 MPa; +: 90 MPa • Compressive stress: II: 135 MPa (short-term); 70 MPa (long-term) +: 25 MPa (short-term); 20 MPa (long-term) • Compressive modulus: II: 1.000 MPa; +: 4.000 MPa Item 306510 306511 306512 306513 306514 306515 306516 306517 306518 306519 306520 306521

External thread

Thread length mm

Unit piece

EURO

M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M14 x 2 M14 x 2 M16 x 2 M16 x 2 M20 x 2.5 M20 x 2.5

500 1,000 500 1,000 500 1,000 500 1,000 500 1,000 500 1,000

1 1 1 1 1 1 1 1 1 1 1 1

122.00 202.00 132.00 222.00 146.00 244.00 154.00 248.00 158.00 268.00 196.00 308.00

THOMASTABIL®-Threaded Bar made of Zinc-Plated Steel Product specification

• ISO threaded bars made of zinc-plated steel with metric thread

Item

External thread

Thread length mm

Unit

Price

piece

EURO

300643 300644 300645 300646 300647

M3 x 0.5 M4 x 0.7 M5 x 0.8 M6 x 1 M8 x 1.25

1,000 1,000 1,000 1,000 1,000

1 1 1 1 1

17.00 17.00 17.00 17.00 17.00

THOMASTABIL®-Threaded Bar made of V4A Steel Product specification

• ISO threaded bars made of V4A steel (316 S 16) with metric thread.

Item 300652 300653 300655 300656 300657 300658

Price

External thread

Thread length mm

Unit

Price

piece

EURO

M3 x 0.5 M4 x 0.7 M6 x 1 M8 x 1.25 M10 x 1.5 M12 x 1.75

1,000 1,000 1,000 1,000 1,000 1,000

1 1 1 1 1 1

28.00 28.00 28.00 44.00 55.00 83.00

THOMASTABIL®-Threaded Bar made of Stainless Steel Product specification

• ISO threaded bars made of stainless steel with metric thread. • Material group A2 class 70 18/8, according to DIN 975.

THOMAPLAST® III - 2015 105

Fastening Elements Item

Grub Slotted Screws and Threaded Rods

External thread

Thread length mm

Unit piece

EURO

300648 300649 300650 300651

M3 x 0.5 M4 x 0.7 M6 x 1 M8 x 1.25

1,000 1,000 1,000 1,000

1 1 1 1

17.00 22.00 22.00 30.00

High wear resistance and good mechanical damping capacity Insulating properties and an amazingly high tensile strength Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage Polyamide can also be used in the food processing industry and in medical fields PA 6 features a higher impact resistance compared to PA 6.6 PA 6 has the highest water absorption of all common plastics up to 9 to 10 % (followed by PA 6.6 with 8 to 9 %), thus considerably increased toughness, flexibility and elongation. However, the strength of the material can therefore be reduced by up to 10%.

Price

THOMASTABIL®-Threaded Bar made of Brass

General technical specification

Product specification

• ISO threaded bars made of brass with metric thread.

Item 300635 300636 300637 300638 300639 300640 300641 300642

External thread

Thread length mm

Unit

Price

piece

EURO

M2 x 0.4 M2.5 x 0.45 M3 x 0.5 M3.5 x 0.6 M4 x 0.7 M5 x 0.8 M6 x 1 M8 x 1.25

250 250 250 250 250 250 250 250

1 1 1 1 1 1 1 1

23.00 23.00 23.00 23.00 23.00 23.00 23.00 23.00

THOMAPLAST®-Spacer made of PA (I-Ø: 2.6 mm) Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

Spacer Elements THOMAPLAST®-Spacers made of PA 6 General product specification

• Very good alternative to metal parts • Very large application area due to universal application possibilities • Shock-absorbing and vibration-damping • Light, resistant to vibration, easy maintenance • Preferably used in electronics due to their dielectrical properties • Available in the most common sizes • Chemical features: Resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines; good resistance to weak alkalis, but only moderate resistance to strong alkalis; limited resistance to weak mineral and organic acids; not resistant to oxidizing acids, strong mineral and organic acids as well as phenols; limited resistance to hydrolysis • Material specification: Polyamide is an elastic, tough, loadable, but notch-sensitive material Impact resistant Resistant to abrasion and cold High fatigue strength and excellent resilience

106 THOMAPLAST® III - 2015

Item

d mm

D mm

L mm

Unit piece

Price EURO

307139 307140 307141 307142 307143 307144 307145 307146 307147 307148

2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6

4 4 4 4 4 4 4 4 4 4

1 1 2 2 3 3 4 4 5 5

50 100 50 100 50 100 50 100 50 100

24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00

Fastening Elements

Spacer Elements

Item

d mm

D mm

L mm

Unit piece

Price EURO

307149 307150 307151 307152 307153 307154 307155 307156 307157 307158 307159 307160 307161 307162 307163 307164 307165 307166 307167 307168 307169 307170 307171 307172 307173 307174 307175 307176 307177 307178 307179 307180 307181 307182 307183 307184 307185 307186 307187 307188 307189 307190 307191 307192 307193 307194 307195 307196 307197 307198

2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00

THOMAPLAST®-Spacer made of PA (I-Ø: 3.2 mm) Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

Item

d mm

D mm

L mm

Unit piece

Price EURO

307199 307200 307201 307202 307203 307204 307205 307206 307207 307208 307209 307210 307211 307212 307213 307214 307215 307216 307217 307218 307219 307220 307221 307222 307223 307224 307225 307226 307227 307228 307229 307230 307231 307232 307233 307234 307235 307236 307237 307238 307239 307240 307241 307242 307243 307244

3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00

THOMAPLAST® III - 2015 107

Fastening Elements

Spacer Elements

Item

d mm

D mm

L mm

Unit piece

Price EURO

Item

d mm

D mm

L mm

Unit piece

Price EURO

307245 307246 307247 307248 307249 307250 307251 307252 307253 307254 307255 307256 307257 307258 307259 307260 307261 307262 307263 307264 307265 307266 307267 307268 307269 307270 307271 307272 307273 307274 307275 307276 307277 307278 307279 307280 307281 307282 307283 307284 307285 307286 307287 307288 307289 307290 307291 307292 307293 307294 307295 307296 307297 307298 307299 307300

3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00

307301 307302 307303 307304 307305 307306 307307 307308 307309 307310 307311 307312 307313 307314 307315 307316 307317 307318 307319 307320 307321 307322 307323 307324 307325 307326 307327 307328 307329 307330 307331 307332 307333 307334 307335 307336 307337 307338 307339 307340 307341 307342 307343 307344 307345 307346 307347 307348 307349 307350 307351 307352 307353 307354 307355 307356

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 26.00 46.00 26.00 46.00 26.00 46.00 26.00 46.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 50.00 28.00 52.00 28.00 52.00

108 THOMAPLAST® III - 2015

Fastening Elements

Spacer Elements

Item

d mm

D mm

L mm

Unit piece

Price EURO

Item

d mm

D mm

L mm

Unit piece

Price EURO

307357 307358 307359 307360 307361 307362 307363 307364 307365 307366 307367 307368 307369 307370 307371 307372 307373 307374 307375 307376 307377 307378

3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

28.00 52.00 28.00 52.00 28.00 52.00 28.00 52.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00 30.00 56.00

307394 307395 307396 307397 307398 307399 307400 307401 307402 307403 307404 307405 307406 307407 307408 307409 307410 307411 307412 307413 307414 307415 307416 307417 307418 307419 307420 307421 307422 307423 307424 307425 307426 307427 307428 307429 307430 307431 307432 307433 307434 307435 307436 307437 307438 307439 307440 307441 307442 307443 307444 307445 307446 307447 307448 307449

4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12

8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4 5 5 6

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 25.00 43.00 25.00 43.00 25.00 43.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 26.00 44.00 28.00 48.00 28.00 48.00 28.00 48.00 28.00 48.00 28.00 48.00 28.00 48.00 22.00 32.00 22.00 32.00 22.00 32.00 22.00 32.00 22.00 32.00 24.00

THOMAPLAST®-Spacer made of PA (I-Ø: 4.3 mm) Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

Item

d mm

D mm

L mm

Unit piece

Price EURO

307379 307380 307381 307382 307383 307384 307385 307386 307387 307388 307389 307390 307391 307392 307393

4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00 42.00 24.00

THOMAPLAST® III - 2015 109

Fastening Elements

Spacer Elements

Item

d mm

D mm

L mm

Unit piece

Price EURO

307450 307451 307452 307453 307454 307455 307456 307457 307458 307459 307460 307461 307462 307463 307464 307465 307466 307467 307468 307469 307470 307471 307472 307473 307474 307475 307476 307477 307478 307479 307480 307481 307482 307483 307484 307485 307486 307487 307488 307489 307490 307491 307492 307493 307494 307495 307496 307497 307498

4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30

100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50

38.00 24.00 38.00 24.00 38.00 24.00 38.00 24.00 38.00 26.00 42.00 26.00 44.00 26.00 46.00 31.00 53.00 32.00 55.00 32.00 55.00 34.00 58.00 35.00 60.00 36.00 62.00 36.00 62.00 38.00 64.00 40.00 68.00 41.00 70.00 41.00 70.00 41.00 70.00 25.00 44.00 25.00 44.00 26.00 45.00 26.00 45.00 27.00 46.00

THOMAPLAST®-Spacer made of PA (I-Ø: 5.3 mm) Technical specification

• Material: PA 6 (polyamide 6) • Colour: natural

110 THOMAPLAST® III - 2015

Item

d mm

D mm

L mm

Unit piece

Price EURO

307499 307500 307501 307502 307503 307504 307505 307506 307507 307508 307509 307510 307511 307512 307513 307514 307515 307516 307517 307518 307519 307520 307521 307522 307523 307524 307525 307526 307527 307528 307529 307530 307531 307532 307533 307534 307535 307536 307537 307538 307539 307540 307541 307542 307543 307544

5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

22.00 37.00 22.00 37.00 22.00 37.00 22.00 37.00 22.00 37.00 22.00 37.00 22.00 37.00 23.00 39.00 25.00 41.00 26.00 43.00 26.00 43.00 26.00 43.00 26.00 43.00 27.00 44.00 27.00 44.00 27.00 44.00 28.00 47.00 28.00 47.00 29.00 50.00 29.00 50.00 29.00 50.00 30.00 52.00 30.00 52.00

Fastening Elements

Spacer Elements

Item

d mm

D mm

L mm

Unit piece

Price EURO

Item

d mm

D mm

L mm

Unit piece

Price EURO

307545 307546 307547 307548 307549 307550 307551 307552 307553 307554 307555 307556 307557 307558 332633 332634 332635 332636 332637 332638 332639 332640 332641 332642 332643 332644 332645 332646 332647 332648 332649 332650 332651 332652 332653 332654 332655 332656 332657 332658 332659 332660 332661 332662 332663 332664 332665 332666 332667 332668 332669 332670 332671 332672 332673 332674

5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21

50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50

28.00 54.00 32.00 56.00 32.00 56.00 32.00 56.00 33.00 57.00 33.00 57.00 34.00 59.00 33.00 56.00 55.00 93.00 55.00 93.00 55.00 93.00 58.00 98.00 58.00 98.00 58.00 98.00 58.00 98.00 58.00 98.00 33.00 58.00 33.00 58.00 33.00 58.00 33.00 58.00 33.00 58.00 36.00 63.00 36.00 63.00 36.00 63.00 36.00 63.00 36.00 63.00 40.00 69.00 40.00 69.00

332675 332676 332677 332678 332679 332680 332681 332682 332683 332684 332685 332686 332687 332688 332689 332690 332691 332692 307559 307560 307561 307562 307563 307564 307565 307566 307567 307568 307569 307570 307571 307572 307573 307574 307575 307576 307577 307578 307579 307580 307581 307582 307583 307584 307585 307586 307587 307588 307589 307590 307591 307592 307593 307594 307595 307596

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 25 50 25 50

40.00 69.00 40.00 69.00 43.00 74.00 43.00 74.00 43.00 74.00 43.00 74.00 43.00 74.00 43.00 74.00 45.00 76.00 33.00 57.00 21.00 35.00 21.00 35.00 21.00 35.00 21.00 35.00 23.00 38.00 23.00 40.00 25.00 43.00 26.00 44.00 31.00 54.00 32.00 56.00 34.00 59.00 36.00 62.00 38.00 64.00 39.00 66.00 42.00 72.00 44.00 76.00 24.00 42.00 25.00 43.00

THOMAPLAST® III - 2015 111

Fastening Elements

Spacer Elements

Item

d mm

D mm

L mm

Unit piece

Price EURO

Item

d mm

D mm

L mm

Unit piece

Price EURO

307597 307598 307599 307600 307601 307602 307603 307604 307605 307606 307607 307608 307609 307610 307611 307612 307613 307614 307615 307616 307617 307618 307619 307620 307621 307622 307623 307624 307625 307626

5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20

20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4

25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 25 50 50 100 50 100 50 100

26.00 44.00 27.00 46.00 28.00 48.00 29.00 50.00 29.00 50.00 30.00 52.00 32.00 56.00 33.00 57.00 34.00 58.00 35.00 60.00 36.00 62.00 22.00 38.00 21.00 40.00 25.00 44.00 29.00 50.00

307627 307628 307629 307630 307631 307632 307633 307634 307635 307636 307637 307638 307639 307640 307641 307642

5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12

50 100 50 100 25 50 25 50 25 50 25 50 25 50 25 50

31.00 54.00 38.00 64.00 21.00 40.00 22.00 41.00 26.00 45.00 28.00 48.00 36.00 62.00 37.00 64.00

307643 307644 307645 307646 307647 307648 307649 307650 307651 307652 307653 307654 307655 307656 307657 307658 307659 307660 307661 307662 307663 307664 307665 307666 307667 307668 307669 307670 307671 307672 307673 307674 307675 307676 307677 307678 307679 307680 307681 307682 307683 307684 307685 307686 307687 307688 307689 307690 307691 307692 307693 307694 307695 307696

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28

13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9

25 50 25 50 25 50 25 50 25 50 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 20 40 10 20 10 20 10 20 10 20 25 50 50 100 50 100 50 100 50 100 25 50 25 50 25 50 25 50

38.00 67.00 40.00 69.00 44.00 76.00 46.00 78.00 46.00 78.00 37.00 64.00 37.00 64.00 32.00 56.00 36.00 67.00 40.00 69.00 41.00 70.00 42.00 71.00 41.00 71.00 45.00 78.00 23.00 40.00 24.00 41.00 25.00 42.00 25.00 42.00 28.00 48.00 31.00 54.00 34.00 56.00 36.00 62.00 43.00 74.00 23.00 39.00 25.00 42.00 27.00 47.00 32.00 56.00

112 THOMAPLAST® III - 2015

ThomaPLAST® III

To provide you with the best possible information about the application areas of our products, we take great care to give you a detailed, precise and technically up-to-date description. However, please note, that we cannot be held liable for any errors. Any values given are recommendations only that have been tested under normal conditions. We suggest, that you test the product under the appropriate conditions determined by your specific use of the application. If you need any help, we will gladly share our experiences with you to give you further assistance.

Our product range is clearly classified into four product groups and presented in detail in other handbooks. THOMAFLUID® I-V Hoses, dosing and connection technology THOMAPLAST® I-V Laboratory plastics, semi-finished products, closure and fastening elements and gaskets THOMAPOR® Separation technology THOMADRIVE® Drive technology Examples of the extremely wide range of products are employed in virtually every sector of industry. The spectrum extends from hoses and fluids technology through elastomers and semi-finished products, plastics and bonding technology to laboratories and filtration technology.

Request our complete programme free of charge and without obligation or visit our homepage at www.rct-online.de

Reichelt Chemietechnik GmbH + Co.

EnglerstraĂ&#x;e 18 D-69126 Heidelberg Germany Tel. +49 6221 3125 0 Fax +49 6221 3125 10 email: info@rct-online.de Internet: www.rct-online.de

Shopping per mouseclick www.rct-online.de