OEM...
There is a Difference Linings Schulte supplied OEM linings provide the best overall performance when used in Schulte slip clutches. A clutch lining’s performance is quantified by its longevity, consistency in slipping, and corrosion resistance. Schulte OEMs have physically tested many different materials, from many different suppliers to determine the best performing liner for each clutch. To provide the correct overload protection level, friction coefficients have been matched with each clutch, dimensional tolerances have been specified to provide a proper fit, and additives are used to reduce corrosion and help prevent clutch “seizure�. Failure to use Schulte OEM slip clutch replacement linings can cause potential reductions or increases in the torque setting of the slip clutch. Incorrect torque settings can cause poor cutting performance if the torque setting is too low or driveline component failure if the torque setting is too high. Simply put, Schulte supplied OEM linings aid in the prevention of most driveline problems that are slip clutch related.
Cross Kits Schulte supplied OEM cross kits are designed and manufactured to provide trouble free performance over their intended lifespan. Cross kits are a vital part of any drive shaft and great efforts are taken by the OEMs to define and control the materials, machining processes, tolerances and hardening processes used in the manufacturing of their kits.
Schulte supplied OEM cross kits have been specifically designed to meet the extreme operating conditions of torque and speed required by each drive shaft. Failure to use the correct OEM cross kit could result in reduced longevity and strength, due to improper material, processes or fit. To help minimize downtime and repair costs, Schulte supplied OEM cross kits are the only recommendation for Schulte equipment.
Quality
Service
Value
Trust
OEM... There is a Difference
Cross Kits Clutch Linings
Clutch and lining
Scan QR code with a smartphone to watch the Bondioli Clutch Maintenance Video or visit schulte.ca under “videos”
Scan QR code with a smartphone to watch the Weasler Clutch Maintenance Video or visit schulte.ca under “videos”
Sold By: Schulte Industries Ltd. P.O. Box 70, Englefeld, Saskatchewan, Canada S0K 1N0 Tel: (306) 287-3715 Fax: (306) 287-3355 E-Mail: info@schulte.ca Visit our Web site at: www.schulte.ca PRINTED IN CANADA
PREPARED by NELSON GRAPHIC DESIGN
201301
Schulte is a registered trademark of Alamo Group Inc. Schulte Industries Ltd. reserves the right to change the design, specification of it’s products without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.