How to smartly reset brother toner cartridge?

How To Smartly Reset Brother Toner Cartridge?

Brother printers are the widely used printers and are well known for their high quality. Brothers have been providing a wide variety of printers well equipped with innovative features. Brother laser printers use toners in place of ink cartridge. These Brother laser printers can print up to 5,000 pages per cartridge of toner. The brother printer alerts you whenever the toner level runs low. The message for low toner level appears quite early before it's actually low. The printer stops printing on the appearance of this message. But still, you can make use of the rest of the ink left unused by resetting the toner cartridge. This can make you use all the ink in the toner cartridge and can help you saving money.

Brother printer support has mentioned some steps below which will allow you to reset a Brother toner cartridge. If you are having any trouble in following the steps or you are not able to reset a toner cartridge you can take the help of Brother printer support. You can get the support number for Brother printer from their website.

Step1- Firstly, turn your printer on and open its front. Now remove the toner cartridge from the printer. You can read the direction on removing and replacing of toner cartridge which is mentioned on the inside of the front panel of the printer.

Step2- On the non-gear side of the cartridge, you will find a sensor light. Cover the sensor light with the help of an opaque tape. The use of opaque tape is must as it will not allow the sensor light to penetrate through it. The use of clear tape may allow the light to pass through the tape, which indicates the printer that it is running low on toner. Now replace the toner cartridge and, it will start working again.

Step3- If the sensor light is not visible, then you can remove the toner cartridge and replace it several times in order to make the printer predict, that it has the new cartridge of toner.

Source