Ironsmith Catalog by Rep Services, Inc.

32 94 43/IRO BuyLine 9709

Pedestrian Safe Tree Grate, Trench Grate and Paver-Grate Systems for Surfaces. Tree Guards and Bollards.

Leadership by design

Green Building Trees are one of the best ways to reduce high solar reflection from hardscapes, helping to cool buildings, pedestrians and indeed whole cities providing one of the only natural carbon sinks known to man. As trees affect both the micro and the macroclimates of cities, tree grates offer one way to help integrate trees in the urban environment. LEED points may be available for projects utilizing tree and trench grates in hardscape strategies for site water management and integrating trees in pedestrian settings. Recycle All IRONSMITH’s cast products are from 100% recycled materials and are 100% recyclable. In addition, steel products are 100% recyclable as most steel production uses a very high amount of recycled material. Pedestrian Safety All IRONSMITH’s tree and trench grates are designed to take heavy pedestrian loads without bowing, flexing or movement. No grates have openings larger than 1/2”, preventing heals, wheels, canes and crutch tips, etc. from getting caught. These grates not only allow, but invite pedestrian use, expanding the walkable area and reducing the hazard of an open tree well. Tree Health Today’s urban environment is challenging for trees. To accommodate this challenge, IRONSMITH offers a wide selection of large tree grate sizes that give the trees as much room as possible. Throughout this catalog, those available, where the size is 84” or more, will be highlighted in blue. (See pages 9 & 10). IRONSMITH tree grates have a selection of standard tree openings and most are expandable in the field, as needed. For additional grate and tree opening sizes, please visit www.ironsmith.biz. Illumination Our new In-Grate Luminaire is the first light assembly that is specifically designed for IRONSMITH tree grates. This light assembly will help take the hassles out of up-lighting specifications with our tree grates (See page 10). We offer light wells with covers on most of our models. In addition, clear acrylic light well covers are available. Design We understand that every project is unique. We are here to assist you with any designs, modifications, or special needs. Please call us for technical assistance.

contents

Tree grates............ Pages 4, 5, 6, 7, 8, 9, 10, 16, 20 Oversize grates..... Page 9, 10 Illuminated grates... Page 10 Paver-Grate............ Page 16 Trench grates........ Page 14, 15 Custom grates....... Page 20 (back cover) Tree frames........... Page 11 Tree guards........... Pages 12, 13 Bollards................ Pages 17, 18, 19 Web Site................. Page 3

Cut sheets, CAD files and 3 PART SPEC available on line at www.ironsmith.biz 2

Cad files will be emailed on request. Call 1-800-338-4766

32 94 43/IRO BuyLine 9709

Leadership by design 5 5

our web site Exploring the web site: Use the pull down menus to browse through Products and Projects and view General information such as Frequently asked questions, or find a Sales rep. Using the Data base search: From the home page you can select SEARCH from the menu bar. This will open a form which will help you search our products. Simply select criteria from the list boxes to narrow your search. If you know the item’s Catalog number, simply enter that. Other wise you can narrow the focus of your search. For example; Selecting PRODUCT CATEGORY: TREEGRATES and SHAPE:ROUND and SIZE:60 will return a list of all our tree grates that combine those attributes.

To Review Product Images: Select PRODUCTS from the menu. Selecting the Main topic (red buttons) will link to the first page of a product line, or select a specific item in the category from the flyout.

5 5

From a specific product page, selecting Sizes and Specifications will link to the database and list all the products in that style from which you may retrieve the PDF and CAD files. From the Database page select PDF or CAD to download these files. The FRAME link in the database record will open the appropriate frame file for the product. Installation details can be downloaded from the INSTALLATION page in each category. Our web site is continually updated. You can find all the latest product sizes, styles and information. For your convenience we have PDF and CAD files of all our products for use in your plans and presentations easily downloadable from our web site database. Cover Photo: This picture was awarded first prize at IRONSMITH’s Sales Conference photo competition. Photo by Downs and Associates of Colorado; the project is “Promenade East” in Westminster CO. This mixed use pedestrian village features our Olympian tree grate (page 5) with a black powder coat finish.

starburst

Leadership by design

Series 1, 1/4” slots Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

Standard tree opening is 16" on sizes up to 60"...or special order, or later expand to 18" or 28", with larger openings available on request. Half section 72" grates are available with 16", 26" or 36" openings. Both series 1 and series 2 grates meet A.D.A. requirements.

starburst

Series 2 3/8” slots

3614-1 3615-1 3617-1 3618-1 4814-1 4816-1 4817-1 4819-1 6017-1 6018-1 6019-1 6020-1 7205-1 7206-1 7207-1 7208-1 8401-1 8402-1 8403-1 8404-1 9601-1 9603-1 10801-1 10803-1 12001-1 12003-1

36” 36” 36” 36” 48” 48” 48” 48” 60” 60” 60” 60” 72” 72” 72” 72” 84" 84" 84" 84" 96" 96" 108" 108" 120" 120"

No No Yes Yes No Yes No Yes No No Yes Yes No No Yes Yes No No Yes Yes No Yes No Yes No Yes

No No No No No No No No No No No No No No No No ** Yes ** Yes ** ** ** ** ** **

18 18 18 18 28 28 28 28 28 28 28 28 36 36 36 36 28 28 28 28 28 28 26 26 28 28

** Supplied in 12 30° sections, support frame required

Rectangular Series 1

3654-1 9 24"x36" No 6054-1 9 36"x60" No 6056-1 9 36"x60" Yes

No No No

Light 1/4

18 18 18

Max.

Part # Shape Size Wells? Sect? Opening 0 36” No No ) 36” No No ) 36” Yes No 0 36” Yes No 0 48” No No 0 48” Yes No ) 48” No No ) 48” Yes No ) 60” No No 0 60” No No ) 60” Yes No 0 60” Yes No ) 72” No No 0 72” No No ) 72” Yes No 0 72” Yes No ) 96" No Yes 0 96" No Yes ) 96" Yes Yes 0 96" Yes Yes Rectangular Series 2 6054-2 9 36"x60" No No 6056-2 9 36"x60" Yes No 7226-2 9 36"x72" No No 7228-2 9 36"x72" Yes No 7222-2 9 48"x72" No No 7224-2 9 48"x72" Yes No 9602-2 9 48"x96" No No 9604-2 9 48"x96" Yes No 12002-29 48"x120" No Yes 12004-29 48"x120" Yes Yes 14402-29 48"x144" No Yes 14404-29 48"x144" Yes Yes

3614-2 3615-2 3617-2 3618-2 4814-2 4816-2 4817-2 4819-2 6017-2 6018-2 6019-2 6020-2 7205-2 7206-2 7207-2 7208-2 9605-2 9606-2 9607-2 9608-2

Series 2 offers a larger selection of rectangular grates with matching square and round models. Tree openings are the same as Series 1. In addition, 96” square and round grates have optional 40” and 48” openings.

0 ) ) 0 0 0 ) ) ) 0 ) 0 ) 0 ) 0 ) 0 ) 0 ) ) ) ) ) )

18 18 18 18 28 28 28 28 28 28 28 28 36 36 36 36 38 38 38 38 18 18 18 18 28 28 28 26 26 26 28 28

“America’s tree grate”, Starburst, is one of our most versatile grates, equally at home in a high fashion mall or on a busy sidewalk. It’s our most popular tree grate and is available with 1/4" slot openings (Series 1) and 3/8" slot openings (Series 2). Note that some rectangular sizes are available in both series.

starburst... America’s tree grate

32 94 43/IRO BuyLine 9709

Light 1/4 Max. Part # Shape Size Wells? Sect?Opening

3622 4836 4838 6058 6060 7250 7252 9610 9612

0 0 0 0 0 0 0 0 0

36" 48" 48" 60" 60" 72" 72" 96" 96"

No No Yes No Yes No Yes No Yes

No No No No No No No Yes Yes

a.d.a.

1/2” slots

20 22 22 26 26 36 36 51 51

A.D.A. meets the guidelines perfectly with maximum 1/2" slots perpendicular to the line of travel regardless of the direction of travel.

Light 1/4 Max. Part # Shape Size Wells? Sect?Opening

3602 3603 3604 4202 4203 4803 4804 4804R 4808 4809 6006 6007 6015 6016 7201 7202 7203 7204 9613 9615 9622 9624 9626 9628 9636 9638

0 ) 0 0 ) ) 0 0 0 ) 0 ) ) 0 ) 0 ) 0 ) ) 0 0 9 9 9 9

36" 36" 36" 42" 42" 48" 48" 48" 48" 48" 60" 60" 60" 60" 72" 72" 72" 72" 96" 96" 96" 96" 96x48" 96x48" 96x60" 96x60"

No No Yes No No No No No Yes Yes No No Yes Yes No No Yes Yes No Yes No Yes No Yes No Yes

No No No No No No No No No No No No No No No No No No Yes Yes Yes Yes No No Yes Yes

20 20 20 24 24 24 24 16 24 24 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36

Light 1/4 Max. Part # Shape Size Wells? Sect?Opening

3613-o ) 4821-o ) 6039-o )

30" 48" 58"

No No No

olympian

1/4” slots

Olympian is available in round, square and rectangular configurations. The octagon version (below) is known as the Glendale. Larger openings on request.

glendale

1/4” slots

No 16 No 16 No 16

This is the octagon configuration of the Olympian. All octagon grates have 16" openings. -o Indicates octagon shaped grate

conquistador

Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

del sol

3610-2 3611-2 4810-2 4811-2 4812-2 6010-2 6011-2 6014-2 7212-2 7213-2 7214-2 8410-2 8411-2 8412-2

0 ) 0 ) 0 0 ) 0 0 ) 0 0 ) 0

36" No No 36" No No 48" No No 48" No No 48" Yes No 60" No No 60" No No 60" Yes No 72" No Yes 72" No Yes 72" Yes Yes 84" No Yes 84" No Yes 84" Yes Yes Rectangular 3608-2 9 36x48" No No All 1/2” slots, except 3/8” slots for 8410-2, 8412-2

12 12 30 30 30 30 30 30 40 40 40 40 40 40 12

1/2” slots Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4870 4871 4872 6031 6033 6032 6034 7231 7232

0 ) 0 ) ) 0 0 ) 0

48" 48" 48" 60" 60" 60" 60" 72" 72"

No No Yes No Yes No Yes No No

No No No No No No No No No

16 16 16 20 20 20 20 24 24

32 94 43/IRO BuyLine 9709

Leadership by design

camelia

5/16” slots

Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4832 4833 4834 6052 6053 6078 7257 7258 7259 7278

0 ) 0 0 ) 0 ) 0 ) 0

48" 48" 48" 60" 60" 60" 72" 72" 72" 72"

No No Yes No No Yes Yes No No Yes

No No No No No No No No No No

18 18 18 19 19 19 32 32 32 32

briar all grates are available in aluminum

1/4” slots*

Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4818 6044 6044-2 6046 6048-2 9630-2 9644

0 48" No 0 60" No 0 60" No 0 60" Yes 9 30"x60" No 9 60"x96" No 9 48"x96" No

No No No No No No No

22 22 28 22 18 28 22

*(Briar grates with -2 suffix indicates 1/2” slots). A pedestrian proof sidewalk grate in square or rectangular shapes only.

sunrise

3/8” to1/2” slots

Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

3042 3637 3648 4837 4848 4858 5674 6057 6059 6074 6076 7264 7265 7266

9 30”x42" No ) 36" No 0 36" No ) 48" No 0 48" No 0 48" Yes 0 56" No ) 60" Yes ) 60" No 0 60" No 0 60" Yes 0 72" No ) 72" No 0 72" Yes

No No No No No No No No No No No No No No

20 20 20 35 35 35 38 38 38 38 38 38 38 38

Sunrise features tapered slots while maintaining A.D.A. compliant slot widths.

palm

3/8” slots Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4876 6024 6026 7236 7238

0 0 0 0 0

48" 60" 60" 72" 72"

No No Yes No Yes

No Yes Yes Yes Yes

15 25 25 30 25

The Palm was designed with A.D.A. considerations as a priority.

marina

3/8” to 1/2” slots Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4874 6084 6086

0 0 0

48" 60" 60"

No No Yes

No No No

18 18 18

Radial slots are tapered 3/8” to 1/2”. Border slots are 3/8”.

parkway

3/8” slots Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4882 4853 6042 6043

0 ) 0 )

48" 48" 60" 60"

No No No No

22 22 22 22

32 94 43/IRO BuyLine 9709

Leadership by design

bond street

1/2” slots

Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4890 4891 6090 6091

0 ) ) 0

48” 48” 60” 60”

No No No No

34 34 36 36

tweed

1/2” slots

Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

4860 4860x3 4864 9660 6080 6082

48”

9 48x144” No

48”

Yes

9 48x96” No

0 0

60” 60”

No Yes

No * No Yes No No

18 18 18 28 32 32

*These grates are supplied in 6 sections but require no x supports.

market street 1/2” square openings Light 1/4 Max. Part # Shape Size Wells? Sect? Opening

3020 3630 3630x3 4840 4840x3 4842 4842x3 6030 6062 6064 7246 7248 7254 7256 8436 8438 9614 9616 9646 9648 9664 9666 12054 12056

0 0 9

0 9

0 9 9

0 0 9 9

0 0 9 9 9 9 9 9

30" 36" 36"x108" 48" 48"x144" 48" 48"x144" 36"x60" 60" 60" 48x72" 48x72" 72" 72" 36"x84" 36"x84" 96" 96" 48"x96" 48"x96" 60"x96" 60"x96" 72"x120" 72"x120"

No No No No No Yes Yes No No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes

No No * No * No * No No No No No Yes Yes No No Yes Yes No No Yes Yes Yes Yes

18 18 18 30 30 18 18 18 30 30 30 30 30 30 18 18 30 30 30 30 30 30 30 30

Quarter sections require supportive frames from Ironsmith. Market Street grates are especially popular for oversize applications because they can be combined to create unique configurations with flexibility in positioning the tree opening. See more oversize grate examples on the following page,

Tree opening can be provided off center if required. Quarter sections require supportive frames from Ironsmith. *These grates are supplied in 6 sections but require no x supports.

great big grates Ironsmith’s selection of extra large tree grates is second to none; many grates in sizes larger than 72” are offered. Market Street grates are especially popular, because they can be combined for unique configurations, with some flexibility in positioning the tree opening. On the right: 84” Starburst grates allow pedestrians and trees to co-exist on Las Vegas Boulevard. In the same city, extra large 96" Starburst grates with four foot tree openings are used by a major casino around the dozens of mature palm trees in pedestrian areas, to gain valuable real estate. Available in giant sizes: A.D.A., Starburst, Olympian, Conquistador, Briar, Market Street.

tree illumination The only tree uplight designed specifically for our tree grates The Ironsmith TGL Series up lights are designed to fit seamlessly with our tree grates. Light fixtures mount to special covers, which fit the standard lightwell openings and compliment or duplicate the grate slot pattern. Covers are of the same metal and finish as the tree grate. The TGL Series Features: • 1/4” thick tempered glass window in cover • Cast faceplate same finish and material as grate • Only 7” of depth required below grate surface • 6 ft. 16-2 cable pre-attached • CSA wet landscape location rated* • 6061-T6 machined aluminum lamp housing • Stainless steel mounting yoke and hardware with 28° of vertical aiming *not to be used submerged or within 10” of fountains

Catalog ID

MR16 Voltage Beam Halogen Spread

TGL-20F TGL-20S TGL-35F TGL-35S

20 Watt 20 Watt 35 Watt 35 Watt

12 volt 12 volt 12 volt 12 volt

40° flood 12° spot 40° flood 12° spot

Leadership by design

32 94 43/IRO BuyLine 9709

steel tree grate frames 1. Standard installation for new concrete at finish grade.

5. For use in new concrete where space outside frame is tight.

2. Use with existing saw-cut concrete or curb.

6. Bolt down application for use with unit pavers.

3. Use when existing hole is sized to grate.

7. Cast in place application for use with unit pavers.

4. Use when bolting frames to existing concrete when mortar-set pavers or tiles are used.

Our one piece frames make installation easy and reliable. This means frames can be shipped separately from grates for quick installation. Order 2 piece frame for existing. In addition, Ironsmith provides grinding pads on all tree grates for easy levelling on site, when needed. Maintain top of frame flush with sidewalk at all times.

One or two piece steel frames for simple, cost effective installations. Ironsmith frames are factory jig welded to assure a correct fit and to minimize field assembly, saving time and money. Heavy steel angle frames are resistant to bending and flex which helps to insure a flat, uniform, consistent installation. One piece assures a good fit, minimum rocking problems and leveling is relatively easy. They can be used in sawcut retrofit tree wells, will accommodate pavers and can bolt up to curbs. Installation methods can be combined on any frame. Frames can be supplied in two pieces to accommodate existing trees. All frames are roll formed or jig welded from mild steel angle per ASTM A-36 (usually 1-3/4" x 1-3/4" x 1/4") with proper clearances built-in for an accurate fit. They can be hot-dip galvanized after assembly to prevent corrosion. Thereâ&#x20AC;&#x2122;s a standard frame for every grate in this catalog and we offer custom frames for other applications.

Tree frame installation in progress....

all steel tree guards Ironsmith tree guards are fabricated and jig welded from hot rolled steel (ASTM-A36) in many rugged styles. They can be attached to the tree grate by first drilling and then bolting, or can be mounted to a crossbar, available as an option with the grate frames. They're fabricated in halves and bolt together for easy labor saving field assembly, with all installation hardware provided by Ironsmith. Standard treeguard height is 5 feet and standard tree opening is 16", however any height and opening may be requested.

Treeguard Attachment:

ATTACHED TO TREE GRATE (Surface Attached)

SUPPORTED INDEPENDENTLY OF TREE GRATE (Support Attached)

custom tree guards Ironsmithâ&#x20AC;&#x2122;s staff will assist with custom tree guard creations from our design department. Pictured on the right are five examples of tree guards fabricated by Ironsmith for special applications. Pilfer proof bolting and grate attachment is available upon request.

Leadership by design

32 94 43/IRO BuyLine 9709

Made with 2 horizontal pieces 1/4" x 2" flatbar and 8 vertical pieces 1/4" x 1" flatbar.

Made with 3 horizontal pieces of 1/4" x 2-1/2" flatbar and 8 vertical pieces of 1/4" x 1-1/2" flatbar.

Made with 3/8" x 3/8" solid bar.

Made with 3 horizontal pieces 1/4" x 1-1/2" flatbar and 12 vertical pieces of 1/4" x 1â&#x20AC;? flatbar.

Made with 2 horizontal pieces of 1/4" x 2" flatbar and 8 vertical pieces of 1/4" x 1-1/2" flatbar.

Hand forged from 1/2" steel, offering strength and a high degree of protection.

Made from 2 horizontal pieces of 1/4" x 2" flatbar and 8 vertical pieces of 1/4" x 1-1/2" flatbar.

Made with 2 horizontal pieces of 1/4" x 2" flatbar and 8 vertical pieces of 1/4" x 1-1/2" flatbar.

Made from 1/4â&#x20AC;? x 1-1/2â&#x20AC;? bar stock.

pedestrian safe trench grates a.d.a

9031 1/2” slot 9032 1/4” slot

A.D.A. grates are available in H20 load rating as Model 9030 in 8”, 10”, and 12” widths.

anthemion 9072 1/2” slot

briar

9049 1/4” slot

conquistador 9054 3/8” slot

del sol

9055 1/2” square openings

marina 9059 1/4” slot

Leadership by design Ironsmith offers pedestrian safe trench grates in a wide selection of styles, materials and finishes, all with pedestrian safety and accessibility in mind. They’re available in cast iron, aluminum or bronze and cast from 100% recycled metals. Most styles complement Ironsmith’s tree grate designs.

Custom trench grates to your design No need to hide that drainage trench! Make it a design element. Curved grates with matching installation frames to any radius and in any width you specify are a specialty. We make it easy to accommodate the drainage of any curved or circular design element with an installation specific to your site.

Sizes

market street 9053 1/2” square openings

olympian 9045 1/4” slot

thistle

9047 1/4” slot

tweed

9051 1/4” slot

All patterns are available in 4”, 6”, 8” and 12” standard widths. Other widths are available by special order.

Drain grates Market street, Del Sol, Tweed and ADA designs now available as 12,16, 24" square drain grates. See website for details.

32 94 43/IRO BuyLine 9709

trench grate installation

1. This detail is for use in new concrete.

5. For use in new concrete where space outside frame is tight.

6. Bolt down application for use with unit pavers. 7. (not shown) Cast in place application, as above, with bar anchors.

Optional Trough

To make installation easy, a system of steel angle frames is offered. Preformed steel troughs with zero slope are available for straight sections to aid concrete form-up. Trench frame shown with optional trough. Many installation situations can be accommodated, including pavers or existing curbs. Optional pilfer-proof bolting is available.

Paver-Grate™

means greater flexibility ... lets you design over, not around the tree pit. Ironsmith now has the exclusive license to manufacture and distribute the patented Paver-Grate paver suspension system. It’s an alternative to traditional tree grates and permits pavers to be suspended directly above the tree pit area. This allows a seamless look while preserving air and water circulation, while preventing soil compaction and roots from lifting pavers. Paver-Grate is suspended 2-4 inches above the root ball, permitting the root system to expand without damage. Air, water and nutrients can readily circulate and the tree is easily accessible should it become injured or diseased. Available standard in 4’, 5’, 6’ and 8’ sizes, and custom sized to your project. Paver-Grate is lighter than traditional grates and does not require a frame, so installation is easy.

Installation video available at our website

Trim rings available ...in cast iron, bronze or aluminum

Easy center opening expansion The expandable center addresses the need for future expansion as the tree matures. By removing the center panel, the 12” square opening increases to 24” to accommodate the growing tree trunk. Paver-Grate’s design practically eliminates weed growth and trash accumulation, as paving materials cover everything but a small area around the trunk.

32 94 43/IRO BuyLine 9709

cast iron & aluminum bollards All Ironsmith bollards are cast in gray iron or aluminum, with a minimum 7/16" wall thickness for increased strength. Most styles may be ordered to accommodate chains. Bollards are usually permanently embedded in the pavement. (An imbed is part of the casting and standard with all Ironsmith bollards). Alternately, they may be set in a steel sleeve (provided by Ironsmith) to be easily removed for emergency access. We recommend aluminum for removable bollards due to weight considerations.

salem bollards Now available in 3 sizes to meet your security challenges. permanent installation Cylindrical imbed is integral part of casting. Rebar may be inserted through imbed hole if desired

Permanent installation for cast iron or aluminum bollards Models: 9020 9022 9023 9023-2 9024

Concrete

35”

40”

36”

15”

17”

salem

salem-2

salem-XL

9023 The classic design of the Salem is at home in a traditional setting. The Salem stands 35" high with a 15" base diameter.

9023-2 / 9023-2C The Salem-2 is a ruggedized version of the Salem. Order 9023-C to sleeve over a 6” pipe (not provided) in a permanent installation. Available with or without provision for chain.

9023-8 The Salem-XL offers an even higher level of security and must be mounted over an 8” schedule 40 pipe (pipe not provided) in a permanent installation. Available with or without provision for chain.

option

Note: Salem-2 and Salem-XL can not be made removable. For greater impact resistance, some bollards can be mounted over pipe. Salem 9023-2C and Cypress 9024 mount over 6“schedule pipe.

victorian

Salem 9023-8 and Harbor 9021 mount over 8” schedule pipe.

48”

9-3/4” 9-3/4”

9022 The Victorian is a slim, sculptured bollard reminiscent of the turn of the century. It can be equipped to support a chain barrier if desired. It is approximately four feet tall, and 9-3/4" in diameter at the base.

harbor 29”

18”

9021 The Harbor can be ordered to fit over 8” schedule 40 pipe for greater impact resistance. Available in grey iron (215 lbs.) or cast aluminum (72 lbs.) in a wide range of finishes, with or without provision for chain. The Harbor bolts to finish grade and can not be made removable.

cypress

36”

9024 The Cypress is ideal where the theme calls for architectural simplicity. The Cypress may be ordered with the imbed removed to sleeve over a 6” schedule 40 pipe.

8” 5”

metro 36”

9020 The Metro is a simple truncated cone. Useful where the design incorporates elemental forms. The Metro can be provided removable.

removable receiver assembly for cast bollards 1 Receiver Opening Profile

8”

The product as shipped, shown with removable lid in position. Aegean bollard in receiver

“X-ray view” shows concrete flush with top of receiver, product and lock tab safely below finished grade, lid stowed inside.

Installing bollard in receiver causes automatic pop-up tab to mate with slotted bollard tab, ready for padlock.

Receivers made for the following models: 9023 Salem; 9020 Metro; 9024 Cypress; 9022 Victorian; 4” and 6” Pipe bollards

our newest removable bollard system for pipe bollards As bollard is inserted into the receiver, pop-up tab from below aligns with tab on bollard, ready for a standard padlock. Design minimizes wobble. With bollard removed: it’s pedestrian friendly-- no hole to fall into, no protruding tabs. No misplaced caps; design helps keep debris out. Removable cover for access. 4” or 6” steel pipe.

32 94 43/IRO BuyLine 9709

Leadership by design

dress up plain pipe bollards

atlantian

4” schedule 40 pipe

9029-6

9029-4

36” (example to show scale)

6” schedule 40 pipe

This contemporary design makes it a good choice for projects with modern surroundings. Available in two sizes.

Caps are cast aluminum. They can be ordered as “cap only“ for new construction, “retrofit” for existing concrete filled pipe. Or “complete with pipe”. Pipe can be specified any length (total above and below ground).

phoenician

9028-6

36” (example to show scale)

9028-8

4” schedule 40 pipe

6” schedule 40 pipe

9028-10

8” schedule 40 pipe

10” standard pipe

Clean design in four sizes as retrofit caps or complete bollards of any length.

9028-4

aegean

to install: Simply set bollard pipe in concrete, fill pipe as usual, seat cap while concrete is still wet. Retrofit caps install with set screws on cap skirt.

9025-10

9025-8

cap installation for plain pipe bollards

9025-6

36” (example to show scale)

4” schedule 40 pipe

6” schedule 40 pipe

8” schedule 40 pipe

10” standard pipe

Available in four sizes as retrofit caps or complete bollards of any length.

9025-4

CATALOG #19

custom tree grates The IRONSMITH design team is eager to assist with your custom design concepts. Whether you need a custom modification to a standard grate for that one special tree or a completely original design for an extensive project, we can turn your ideas into reality. Our wide range of capabilities in producing both cast and fabricated metal products affords you a resource for custom

design and fabrication of a broad range of possible site specific artifacts. Our flexible “made to order” production practices ensure that your custom product won’t take third or fourth place to “production runs”. We can also offer 3D modeling, artistic design visualization, and CAD electronic file sharing, so your client and the members of your team can share your vision.

CUSTOM GRATES PICTURED: Trapezoid Market Street grate; 48” grate for mall interior; Curved Olympian grates in brushed aluminum; 60”custom logo grate, Dallas sport center; Streetscape, Southern California.

finish and material options MATERIALS: All Ironsmith cast products are available in recycled cast gray iron, aluminum or bronze. Special alloys of aluminum and bronze available by special request FINISHES: Natural unfinished gray iron will develop an attractive rust patina that does not penetrate or weaken the casting and is maintenance free. Natural aluminum will age to a pewter gray. Alternately, the following finishes can be provided to fit your needs and budget. 1. Primed for your choice of top coat; 2. Primed and painted in exterior enamel or primed and painted exterior polyurethane; 3. Powder coated;

4. Galvanized or zinc metalized. We can match paint finishes to your color choice and a range of colors are available in powder coat. Please call with your requirements. Cast iron is extremely susceptible to rust. Some rust should be expected however good the paint system. For this reason the following guidelines should be used when specifying finishes for cast products. 1. Use only dark colors; black, dark brown, dark green, dark gray, etc. 2. If light colors are required, specify a zinc undercoat to help reduce rust bleed through. 3. When no rust can be tolerated, specify cast aluminum.

To find out how Ironsmith can help you with your particular landscape project, call your local sales representative or

1-800-338-4766 toll free

Palm Desert, California Phone: 760-776-5077 • Fax: 760-776-5080 • Email: info2u@ironsmith.biz Visit us on-line at www.ironsmith.biz or www.sweets.com Castings manufactured from 100% recycled metals. Printed in U.S.A. © 2010, IRONSMITH, INC. Ironsmith reserves the right to modify or eliminate any product without notice. All rights reserved.