22/23 SPECIFICATION GUIDE
MESSAGE TO OUR VALUED CUSTOMERS: With the printing of our 2022-2023 Specification Guide, Rev-A-Shelf is very aware of the problems many of our best customers continue to experience when trying to recieve products in a reasonable time frame. We have produced and shipped a record amount of material in the past 12 months. However, our supply chain and access to a consistent workforce in Kentucky has made it impossible to keep up with the current order volumes. We expect this to get incrementally better as the year progresses. Also, due to the volatility of material and logistics costs, we have decided not to print an SLP (Suggested List Price) this year. Pricing can be accessed by scanning the QR code located at the top of each spread thoughout the Specification Guide. This will allow us to offer the most up-to-date pricing throughout the year, giving our customers confidence when quoting or planning their design. Thank you! David Noe - GM
2
22/23
Specification Guide
What's Inside
featuring
Introduction.................................. 2
Tall Pantry Solutions................. 172
Contents........................................ 3
Drawer Solutions...................... 198
American Made............................ 4
Wall Solutions........................... 228
How-to’s......................................... 5
Vanity Solutions........................ 250
Full Access Solutions................... 6
Closet Solutions........................ 278
Walnut Solutions.......................... 8
Lazy Susan................................. 347
Solid Bottom Solutions.............. 10
Hardware................................... 397
Coming Soon.............................. 12
LED Lighting..............................406
Waste Solutions.......................... 36
Index........................................... 506
Blind Corner Solutions.............. 74
Warranty/PROP 65/Terms...... 514
Sink Solutions............................. 92
Homes for Our Troops............. 515
Base Solutions...........................117
3
Employing a local workforce of more than 400
Proudly “Made in America” and manufactured and assembled in our two Kentucky facilities
Page
4
a c i r e Am d u o r P
xx
d n a d e s a b Louisville- for three af mily owned s n o i t a r e n e g
PRODUCT CHART
For overview and installation videos on many of our products visit: rev-a-shelf.com/videos
We’ve simplified our product chart and added a couple of columns to help make your buying decisions easier.
Drawer Pullout w/ Euro Slides PRODUCT
DESCRIPTION
DIMS
BC
FINISH
SLP
4WDB-12
Pullout Drawer
11" (280 mm) W x 18-1/2" (470 mm) D x 5-5⁄8" (143 mm) H
B15
Maple
$79.15
4WDB-15
Pullout Drawer
14" (356 mm) W x 22-1/2" (572 mm) D x 5-5⁄8" (143 mm) H
B18
Maple
$91.80
Maple
$287.85
Maple
$363.10
Maple
$326.70
Maple
$418.05
MCO
Drawer Pullout w/ BLUMOTION Soft-Close 4WDB4-18SC-1
Standard Drawer
14” (356 mm) W x 21-5/8” (549 mm) D x 4-7/8” (124 mm) H
B18
4WDB7-18SC-1
Tall Drawer with dividers
14” (356 mm) W x 21-5/8” (549 mm) D x 8” (203 mm) H
B18
4WDB4-24SC-1 Standard Drawer
20” (508 mm) W x 21-5/8” (549 mm) D x 4-7/8” (124 mm) H
B24
4WDB7-24SC-1
20” (508 mm) W x 21-5/8” (549 mm) D x 8” (203 mm) H
B24
D x 5-5⁄8" (143 mm) H
12” (305 mm)
Tall Drawer with dividers
D x 5-5⁄8" (143"MCO" mm)= H Minimum Cabinet Opening. 15” Our (381 mm)
recommended minimum cabinet opening dimensions are based upon installation into 1-1/2” face frame cabinets. D x 4-7/8” (124 mm)ThisHis important because occasionally the width m) D x 5-5⁄8" (143 mm) of the productH is widerHthan the D x 8” (203 mm) part of the product that pulls m) D x 5-5⁄8" (143 mm) Hcabinet. out of the
D x 4-7/8” (124 mm) H
When both face frame and
D x 8” (203frameless mm) dimensions H are needed, we have listed them m) D x 4-7/8” (124 mm) H as FFMCO and
12” (305 mm) 15” (381 mm) 15” (381 mm) 21” (533 mm) 15” (381 mm)
m) D x 8” WHAT (203 mm)DOES H
21”
B18
Blue Gray B18 Champagne Green B24 Red
Orion Gray 13 Silver mm) 17 (533 Almond 15
21” (533 mm) THIS MEAN?
You will notice that our charts contain columns that house MCO's and CAB's for that specific product. Below you will find a bank of what those letters mean.
FF
Face Frame
a cabinet that has a fixed frame to the front of the cabinet.
FL
FH
B
T
Full Access
Full Height
Door/ Drawer
Tall Cabinet
a cabinet that allows full accessibility by eliminating the face frame of the cabinet.
a cabinet without a drawer opening, using the whole height of the cabinet.
a cabinet that has a drawer atop the cabinet opening
Tall/ Utility cabinets
(frameless)
Maple
B24
COLOR NUMBER CODE B18 Maple
FLMCO. The FF is for face frame and the FL for White 11 frameless (aka full access). Black mm) 18 15” (381 m) D x 8” (203 mm) H
m) D x 4-7/8” (124 mm) H
B15
When both face frame and frameless CAB FINISH SLP Mapleare provided we $287. typicalB18 cabinet recommendations have listed them as FF for face frame and FL for B15 Maple $79.15 frameless (aka full access). B18 Maple $363 Note: unless otherwise noted, typical cabinet B18 Maple $91.80 recommendations are based upon 1-1/2” face frame B24 Maple $326 cabinet construction.
MCO 15” (381 mm)
21” (533 mm)
CAB
"CAB" = Typical Cabinet. We get it, professionals just want to know what size cabinet FINISH SLP the product is designed for. So$79.1 Maple we've tried to identify the typical Maple cabinet for each of $91.8 our products.
W
Wall Cabinet
22 Orange 14Maple Yellow 12 Brown 19Maple 16
Maple
B24
SB
Sink Base
VB
Vanity Base
$418. $287.8 20
21 $363.1 10
$326.7
$418.0
BC
Blind Corner
a cabinet a cabinet a shorter a cabinet that is designed to be designed to be depth cabinet in the corner of mounted above used with a sink designed to be your kitchen counter tops used in a vanity or bathroom
5
Page 48
Page 76
Page 206
Page 112
Page 166
Page 184
We're taking full access to new levels. Over 140 SKUs designed specifically for full access cabinetry.
Full Access Pages: Waste Containers.............................................................48, 54, 56, 59, 66, 69 Blind Corner Accessories...................................................... 76, 78, 84, 85, 87 Sink Accessories..................................................................................... 111, 112 Base Accessories...........................................118, 150, 156, 158-163, 168, 170 Tall and Pantry Accessories.................................................................. 184, 186 Drawer Accessories................................................................................202-210 Vanity...................................................................................................... 259, 277 Lazy Susans..................................................................................................... 392 6
Page
xx
7
Walnut Utility Tray Inserts: Page 214
Walnut Cutlery Tray Inserts: Page 216
Walnut Soft-Close Mixer Lift Kit: Page 170
We're going nuts about this stuff. Dozens of walnut SKUs available.
Walnut Drawer Peg Systems: Page 212
Walnut Top Mount Waste Containers: Page 69
8
Walnut Double Knife Block Inserts: Page 220
Walnut Bottom Mount Waste Containers: Page 59
Page xx Walnut Spice Drawer Inserts: Page 218
Walnut Blind Corner Optimizer: Page 86
Page
xx
9
We're bringing the latest styles to the industry. Proudly offering a wide range of colors and finishes.
10
Pages: 78, 80, 84, 87, 112, 158-163, 168, 186, 192
Maple solid bottoms with round chrome wire
Pages: 78, 80, 84, 87, 158-163, 168, 186, 192
Gray solid bottoms with round chrome wire
Pages: 76, 84, 112, 158-163, 168, 184, 392
Solid bottoms with textured linen finish and orion gray flat wire.
New products will be available
Summer 2022. Once available, all information will be on our website.
SCAN FOR NEW PRODUCTS!
11
NEW PRODUCT
COMING SOON
2022
SWIVEL SHELF PULLOUT
Patent-pending
Built-in “Extension Lock”
Perfecting motion
The innovative 448SW Series, besides being a versatile space-saving kitchen cabinet accessory, is the only pullout on the market featuring two patent-pending swiveling shelves that allow the user to see and access items with a simple swivel of the shelf, and then return to center with the built in self-centering system. The pullout features an “extension lock” that locks the unit in an extended position, preventing the unit from closing while the shelves swivel. Available for 9” and 12” full height cabinets, they feature natural maple construction with a semi-gloss finish; beautiful chrome accents keep items secured and double as a handle when rotating the shelves. Just add an existing cabinet door to provide seamless integration into any design and make it entirely accessible, gliding effortlessly on full-extension, concealed slides with BLUMOTION soft-close. NOTE: Designed for 1-1/2” ( mm) faceframe applications only
12
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
(2) swivel shelves with built-in self-centering axis system
Swivel Pullout PRODUCT
DESCRIPTION
DIMS
MCO
CAB
448SW-BCSC-5C
Swivel Shelf Pullout
6” (152 mm) W x 21-5/8” (549 mm) D x 25-1/2” (648 mm) H
5-1/2” (140 mm)
FHB9
448SW-BCSC-8C
Swivel Shelf Pullout
8-3/4” (222 mm) W x 21-5/8” (549 mm) D x 25-1/2” (648 mm) H
8-1/2” (216 mm)
FHB12
13
14
NEW PRODUCT
COMING SOON
2022
THE SIDEKICK
Patent pending
+
=
FEATURING
Perfecting motion
SIDEKICK ATTACHES TO EXISTING 448 AND ADDS 3” TO THE FOOTPRINT PER SIDEKICK.
(3) CONFIGURATIONS AVAILABLE: FOIL, SPICES OR BAKING TRAYS
It seems we never have enough cabinet space to store everything we have, and where we end up storing things isn’t always where we need them. But now you can have one cabinet work double and even triple time, with the addition of Rev-A-Shelf’s innovative “448 Sidekick”. The patent-pending design allows the unit to attach to a 448 base pullout and slide independently, providing access to both the “sidekick” and to the “hero” in which it is attached. Available in three configurations to store baking trays, foils or spices, and constructed from the same wood and chrome materials as our 448 pullouts, it creates one cohesive multipurpose storage solution. Sidekicks can be added to a new or existing 448 pullout with only a few screws and glides effortlessly on ball-bearing slides.
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
15
NEW PRODUCT
COMING SOON
2022
CASSEROLE DISH ORGANIZER
FEATURING
Up to (6) dividers and (12) clips
Perfecting motion
Is your cabinet crammed with casserole dishes that you have to bend, reach and unstack to use? Put those troubles behind you with our 4CDS Series Casserole Organizer. Available for 18” and 24” cabinets, they come with up to (6) adjustable dividers to create up to (7) compartments for casserole dishes, baking trays and so much more. They pull completely out of the cabinet on full-extension, 3/4” over-travel, MOVENTO slides with BLUMOTION Soft-Close for complete accessibility and feature natural maple dovetail construction with a semi-gloss finish.
16
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
17
18
NEW PRODUCT
COMING SOON
2022
HALO LAZY SUSAN
Patent-pending
Powered by a 5VDC long-life rechargeable battery
Patent-pending and designed in the U.S.A., the Halo Susan features Luniform, 3500K, 5VDC Chip-On-Board (COB) FlexTape® embedded into the side of a Rev-A-Shelf lazy susan to provide wireless, dot-free cabinet illumination. Powered by a 5VDC long-life rechargeable battery, the compass-controlled system automatically calibrates itself during power-up, eliminating the need for user programming. Simply install your susan, plug in the battery and rotate!
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
19
NEW PRODUCT
COMING SOON
2022
WOOD PLATE DIVIDER INSERT
(16) compartments
Minimum Cut: 28-1/2” (724 mm) W, 18” (457 mm) L, 2-31/32 (75 mm)” H
Are your plates piling up or out of reach? Then put them in their place with Rev-A-Shelf’s new 4PDI Series Plate Insert. Designed for 36” - 3 drawer base cabinets, they can be cut down to fit a 33” - 3 drawer base cabinet application and drop-in to place. The insert holds: (8) small plates up to 1” thick and 8-1/4” in diameter & (8) large plates up to 1-1/4” thick and 10-3/4” in diameter and can be used with round, square, etc., dish designs.
20
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
NEW PRODUCT
COMING SOON
2022
USB CHARGING DRAWER
FEATURING
In-drawer receptacle with (4) 2.1-amp USB-A ports
Perfecting motion
Tired of looking for USB adapters to charge your devices and hate having tangled, messy cords strewn about? Then you need our 4WCDB Series USB Charging Drawer featuring maple construction with shock absorbent mat and BLUMOTION soft-close slides, this easy-to-install unit is designed for 18” full access base cabinets and boasts an integrated cord guide to ensure safe operation and an in-drawer charging base with (4) 2.1-amp USB-A ports for charging up several items at one time.
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
21
NEW PRODUCT
COMING SOON
2022
PILASTER UTENSIL PULLOUT
Designed to be used with our 4PIL Series Pilaster Upright System
Shown with wood drawer pullout
FEATURING
Perfecting motion
4PUT-18SC-1: (1) 2 qt. and (2) 1.25 qt. stainless steel bins and (1) chrome wire basket
4PUT-24SC-1: (2) 2 qt. and (3) 1.25 qt stainless steel bins and (1) chrome wire basket
If you need a place to put your utensils, we have the ideal customizable solution with our 4PUT Series Pilaster Pullout. Designed for use with our pilaster system rails, they fit 18” or 24” base cabinets, are made of natural maple and feature up to (5) stainless bins, a chrome wire basket and (2) small compartments, ideal for smaller utensils. Customizable and easy to assemble, they glide effortlessly on full-extension, BLUMOTION soft-close slides and can be used alone, in multiples or to create a custom tall pantry with the addition of our other pilaster drawers (sold separately).
22
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
NEW PRODUCT
COMING SOON
2022
(2) units shown
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
23
NEW PRODUCT
COMING SOON
2022
WIRE DOOR MOUNT WASTE CONTAINER
Good things come in small packages and that is no exception for our 5SOWC door mount waste bin with built-in towel holder. It’s 8 L capacity is great for vanities and under kitchen sink applications and the hand towel holder makes drying hands or quick clean-ups a breeze. Designed for 30” sink base cabinets, it comes complete with a metallic silver can, white lid and wire frame that installs with just four screws with matching cap covers for a finished look that accentuates any cabinet.
24
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
NEW DESIGN
COMING SOON
2022
ELITE BLIND CORNER OPTIMIZER
Patent pending design
Available with gray solid bottoms
Give your blind corner cabinet an “elite” upgrade with Rev-A-Shelf’s new 53PSPE Series blind corner optimizer. This blind corner optimizer takes functionality to the next level with two sliding, top shelves that work independently from the lower shelves. Designed for 15” and 18” blind corner cabinet openings, this two-tier accessory comes with solid bottom shelving in your choice of natural maple or gray. It installs for either left or righthanded applications and features stylish chrome-plated round wire accents, full-extension, ball-bearing soft-close slides, and is constructed with heavyduty materials making it both functional and stylish. NOTE: Insert “MP” for Maple Shelf or “GR” for Gray Shelf
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
25
NEW SIZE
COMING SOON
2022
BASE CABINET PULLOUT W/ UTENSIL BINS
Rev-A-Shelf’s beautiful utensil base organizer is in a new 11” size. Designed to fit 15” full height face frame base cabinets and specifically for storing utensils, it comes with (6) 1.25 qt., removable, easy to clean stainless steel bins and features adjustable shelves with chrome rails to help keep everything in its place and glides on BLUMOTION soft-close slides. Door mounting is easy with our patented door mount brackets that provide up to 5” of flexibility for trouble-free installation on any door style. FEATURING
Perfecting motion
26
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
NEW SIZE
COMING SOON
2022
BASE CABINET PULLOUT w/ KNIFE BLOCK & UTENSIL BIN
448KB-BCSC-5C shown
Rev-A-Shelf’s beautiful base organizer is in a new 6” size. Designed to fit 9” full height full access cabinets, it features adjustable shelves with chrome rails to help keep everything in its place and glide on BLUMOTION soft-close slides. Door mounting is easy with our patented door mount brackets that provide up to 5” of flexibility for trouble-free installation on any door style. FEATURING
Perfecting motion
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
27
28
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
NEOLOOP Bold lighting for bright applications; achieve consistent, seamless illumination from start to finish with Neoloop flexible silicone LED lighting. Shatterproof and watertight, Luniform technology provides a continuous beam of light without dark spots perfect for adding light to dark millwork, creating unique wall designs, outlining commercial logos, accent lighting and more. Rated for indoor, outdoor, damp and wet locations*. *When used with factory-installed inputs
Side-Emitting
Top-Emitting 12VDC 24V DC
12VDC 24V DC
1/4 in. (6 mm)
13/32 in. (10 mm)
1/2 in. (12 mm)
13/32 in. (10 mm)
Side-Emitting: flat illuminated side bendable on the horizontal axis
Available in side or top emitting
Groove for recess mounting or surface mount with U-Clips
Top-Emitting: curved illuminated top bendable on the vertical axis
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
29
WHITE TUNABLE White Tunable
2700K
3500K
6500K
Eliminate the guesswork and get the LED that pairs perfectly with your general lighting and overall design.
CCT CONTROLLER/RECEIVERS Compatible Tresco® FREEDiM series CCT hand and wall controllers (sold separately) Works with any 12/24VDC Tresco® RGB or CCT low voltage lights Tuning of color temperature from 2700K-6500K
Parent Controller/Receiver (required) Precision tunable remote controls (sold separately) Child Controller/Receiver (optional)
30
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
WHITE TUNABLE FLEXTAPE® Changing your light source’s color temperature is easy with Tresco® Lighting’s White Tunable CCT FlexTape® lighting solution. Select between warmer lighting that highlights natural wood grains and earth tones or cool lighting to highlight whites; perfect for cabinet, task or accent lighting and store fixtures. The low profile and adhesive 3MTM backing give this LED lighting solution the versatility to install in a multitude of places. Eliminate the guesswork and get the LED that pairs perfectly with your general lighting and overall design.
3W/ft. (9.8W/m)
115°
12VDC
24VDC
4W CCT POWER POCKIT® Install now and choose the color temperature later with warm 2700K to daylight 6500K all in one fixture. A high output, slim profile and recess or surface mount capability make this our most versatile puck for even illumination. 2700K:
4W
236 Lumens 6500K: 280 Lumens
105°
Available in multiple finishes with milk lens
Thin profile: Just 1/2” (13 mm) depth when recessing or surface mounting
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
31
SWIDGET Upgrade your space with a simple swap. Replace your existing switch or outlet with a technology-ready Swidget Device. Add your choice of Wi-Fi enabled inserts and control your lights, program schedules, create scenes, set automations and more with the Swidget App, or pair with Amazon Alexa or Google Home to enable voice commands. A future-proof versatile solution for a connected smart home.
PLUG & PLAY TECHNOLOGY Upgrading your space is as easy as 1-2-3.
1. Select and Install Your Device
Interchangeable Wi-Fi Enabled Inserts
2. Choose Your Desired Insert
Minimalistic Design - fits Decora style wall plates
32
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
3. Control Your Smart Home
SNIP Paper-thin illumination, Snip panels have the flexibility to conform to curved surfaces and wrap around objects for continuous even illumination. Sold in 24” x 9” (610 mm x 229 mm) panels, the extremely lightweight LED sheets can be snipped into 3” x 3” (76 mm x 76 mm) squares and re-connected into any custom configuration; a versatile lighting solution for unique applications.
Listed in SAM Manual
No soldering required - simple FlexConnect connectors (sold separately)
Strong 300 LSE 3MTM adhesive or screw mounting options available
Cuttable and linkable modular DIY lighting system
rev-a-shelf.com | 800-626-1126 | info@rev-a-shelf.com
33
Sliding Tie-Rack • Full-extension, ball-bearing, steel slide with steel rack housing • Contains (16) tie arms
Page
278
Page
3-Way Hook
Swing Out Ironing Board
• Available in Chrome, Bronze, Satin Nickel & Satin Chrome • Zinc die cast construction
• Board: 38” long, 13” wide • 5” wide when stored, including hardware
34
xx
Swivel Belt Rack • Over-extension, ball-bearing, steel slide with pivoting roller hinge • Locks in place after pivoting
3-Way Swivel Closet Mirror • Universal left or right mount hardware • Soft-close retracting mechanism
Page
xx
Pop-Out Telescopic Valet Rod • 10 mm diameter rod extends 9.5” • Available in Bronze, Chrome, Satin Nickel & Satin Chrome
Slanted Hamper Basket
Sliding Basket
• Unique, slanted rim design for clearance with tilt-down hamper cabinet doors • Optional canvas fitted laundry bags available • Flap stay hardware included
• Full-extension, ball-bearing slides • Available in Bronze, Chrome & Satin Nickel
35