Tresco Lighting Specification Guide by Rev-A-Shelf

SPECIFICATION GUIDE

TrescoBook_2019.indd 1

6/20/19 5:04 PM

Tresco Lighting Louisville, Kentucky Welcome to the Tresco Lighting Catalog. The following pages contain many updates and new products launched within the last year. LED technology is evolving rapidly and Tresco continues to be in the forefront of these changes. Several products have been updated with newer more efficient diodes resulting in higher light outputs while maintaining the same power consumption. Our FREEDiM series is sure to impress with the addition of the two-zone wireless wall dimmer. The Infinex product series is expanding rapidly with several new finishes along with diffuser options. These are only a few of the exciting updates found throughout the catalog. I encourage you to explore the catalog and take note of any items that might be of interest for an existing or future project. If you cannot find what you are looking for, feel free to contact us for special projects or customization. Whatever your needs, we will always do our best to offer the easiest, most economical and efficient solution. Thank you for your continued support of Tresco Lighting. Sincerely,

Christopher Tress Director of Lighting

TrescoBook_2019.indd 2

6/20/19 5:04 PM

About Us

12VDC Puck Lighting

Pockit® 1W................................................................................................23 Pockit® Plus 1.5W.....................................................................................27 Power Pockit® 3W.....................................................................................31 Power Pockit® 5W.....................................................................................35 Pockit® Point.............................................................................................39 Pockit® Spot..............................................................................................43 Pockit® Adapt............................................................................................47 3W EquiLine Puck.....................................................................................51 Solo...........................................................................................................55 Swing.........................................................................................................59

12VDC LED

12VDC Linear Lighting

Fineline.....................................................................................................63 SimpLED...................................................................................................67 SimpLED 2.0.............................................................................................71 Elli® Series................................................................................................75 Eurolinx.....................................................................................................79

12VDC Flexible Lighting

FlexTape....................................................................................................83 Edge Emitting FlexTape............................................................................91 EquiLine Tape LED....................................................................................95 Infinex......................................................................................................101

12VDC Panel Lighting

113

Etch.........................................................................................................113

12VDC Special Series

121

iMAGine® Gondola Track.........................................................................121 Stax.........................................................................................................125 Ascent.....................................................................................................129 Reach......................................................................................................133 Eclipse.....................................................................................................137

12VDC Components

141

12OV LED

24VDC LED

Power Supplies.......................................................................................141 Controllers..............................................................................................145 Install Accessories..................................................................................157

24VDC Panel Lighting

161

Snap........................................................................................................161

120V Puck Lighting

165

Pockit® 120-L..........................................................................................165 Pockit® 120-M.........................................................................................171

120V Linear Lighting

177

T5 Trescent LED....................................................................................177

Battery

181

Alpha.......................................................................................................181 Fit............................................................................................................185 Pulse.......................................................................................................189

Sales Support on page 194 For overview and installation videos on many of our products visit: trescolighting.com/videos

TrescoBook_2019.indd 3

6/20/19 5:04 PM

Free Specification Assistance L-POC-1LEDSFR-WNI-1 INSIDE WALL

L-LED-SMPXX-WNI-1

L-LED-LINKD-120-1

The increasingly popular application of LED lighting is new to many design professionals. Let our Lighting Layout Assistance Program guide you in specifying the ideal product and wiring schematic for your next residential or commercial project.

L-DC-MGT60-CON-1

22”

L-LED-CTCL-153P-WH-1

22”

TRESCO DESIGN LAYOUT Project: Cherry Kitchen Prepared for: Baker Cabinet Co. Submitted by: J. Baker Prepared by: G. Smith

L-XXX-XX

$99.99

L-XXX-XX

GET STARTED

TODAY

TrescoBook_2019.indd 4

$99.99

disclose shall hold and use this drawing for the sole benefit of RAS, and shall not matter is original to RAS. Any vendor receiving this drawing from RAS by Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject or performance characteristic unless authorized by RAS. The lighting design portion of this drawing is the property of Tresco Lighting written permission of RAS. Vendors shall not revise any physical, dimensional, to the interest of RAS with respect to this drawing without the express it to or use or reproduce it for any third party, or perform any act adverse

$99.99

LAYOUT NO.

001-K-1REV1

DATE

1/01/2015

$99.99

L-XXX-XX

trescolighting.com/layout 1-800-227-1171 | trescolighting.com

6/20/19 5:04 PM

Product Information Product Color Finishes Tresco’s lighting products are available in eight standard color finishes: White, Black, Chrome, Gold, Nickel, Antique Brass, Aluminum and Oil Rubbed Bronze. Please refer to the individual Product Sections for color availability of each product.

White (WH)

Black (BL)

Chrome (CH)

Gold (GD)

Nickel (NI) (Brushed)

Antique Brass (AB)

Aluminum (AL) (mill)

Oil Rubbed Bronze (ORB)

ETL ,UL, and QPS – Testing, Inspection and Certification • • • • • •

All are independent, non-profit labs — not government agencies or government funded ETL is the largest worldwide UL is the largest in the USA Both are Nationally Recognized Testing Laboratories (NRTL) as recognized by OSHA Both are recognized by local inspectors throughout North America No mark is better than the other

Tresco Products Tested and Certified for Canada and the United States ETL or UL marks serve as proof of product compliance to Canadian and U.S. standards. When products bear these marks, this indicates to the consumer that the products have passed a complete and thorough set of tests and certification requirements. All TRESCO® lighting systems carry UL, ETL or QPS safety certifications. In addition, a majority of our individual lighting components (lights, power supplies, and accessories) are also registered and certified by ETL and/or UL.

UL’s Recognized Component Mark The UL Recognized Component Mark is used on components that are a part of larger products or systems. It is certified by UL to both Canadian and U.S. requirements.

CE Mark CE Marking permits a product to be sold throughout the European Union. It is a conformity mark noting the product complies with all applicable European Directives.

* The ETL Mark is a registered trademark of Intertek. The UL Mark and Recognized Component Mark are registered trademarks of Underwriters Laboratories Inc. All product dimensions and specifications are subject to change without prior notice.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 5

6/20/19 5:04 PM

What To Look For Diode Life: LEDs fade as opposed to abruptly burning out. “End of Life” refers to the number of hours until the LED has completely faded out, although it will have been too dim to use for many hours leading up until that point. “Useful Life”, on the other hand, refers to the number of hours until the LED reaches 70% of its initial light output, which is a much more practical indicator for the consumer.

50,000 Hours = 17 Years (8 hours a day)

End of Useful Life

Color Consistency:

Tresco:

LEDs, as a natural result of the manufacturing process, have inconsistent color from one diode to the next. Top brand LED suppliers, like the ones used by Tresco, combat this by means of a process known as “binning” -inspecting each individual diode and matching them to ensure consistency.

Cheap LEDs:

Lumen Output: Lumen is the measure of visible light output emitted from a fixture. For under cabinet lighting, where the goal is to illuminate a workspace to perform specific tasks, the brighter, the better. For soffit, toe kick or other accent lighting, a moderate output is better.

TASK: ACCENT:

150+ LUMENS UNDER 150 LUMENS

Beam Spreads: Using puck lights with tight beam spreads under wall cabinets can create unsightly dark spots on the backsplash between lights. Beam spreads of 90 degrees or greater will reduce the dark spots. For spotlight applications, such as in-cabinet or display lighting, a beam spread of 20-40 degrees is desirable.

TrescoBook_2019.indd 6

TASK:

90°+

SPOT:

20-40°

1-800-227-1171 | trescolighting.com

6/20/19 5:04 PM

Color Temperature Color temperature is the rating a particular color renders on the Kelvin scale. These color temperatures alter how an object or room is perceived when illuminated, and Tresco offers a wide range to choose from. To find the appropriate color temperature for your application, please reference the table below:

Warm White

Warm to Neutral

Cool White

Tresco Standard

2700K

3000K

Daylight

Tresco Standard

3500K

4500K

5000K

5500K

6500K

2700K Warm White

3000K Warm White

3500K Warm to Neutral

Recommended for Earth Tones Mimics Incandescent Highlights Wood Grains Primarily for Residential Use Not Recommended for White

Recommended for Earth Tones Slightly â&#x20AC;&#x153;Whiterâ&#x20AC;? Than Incandescent Highlights Wood Grains Primarily for Residential Use Not Recommended for White

Transitional Between Warm and Cool Will Equally Highlight Earth Tones and Cool Tones Recommended for Residential and Commercial Use Will Give White an Off-White Look

6500K Daylight

5000K Cool White Highlights Whites/Blue/CoolTones Primarily For Commercial Use Recommended for White Not Recommended for Wood Grain/Earth Tones

Has Bluish Tint (Sky Color) Primarily Used for Backlighting/Signs Not Recommended for Residential Use

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 7

6/20/19 5:05 PM

Luniform

luniform (loo-nuh-fawrm) n. The technology to eliminate “dotted” appearances and reduce unwanted glare within light emitting diode fixtures.

SECONDARY OPTICS

Secondary optics are lighting components uniquely designed to diffuse LED diodes and reduce glare, such as special lenses and proprietary films.

T5 LED

Eurolinx

Diode Blending Film for Infinex

DIODE TECHNOLOGY

Diode technology allows for up to 10X the amount of LED diodes on a single circuit board or substrate, resulting in greater light output and a uniform beam spread.

SimpLED 2.0 Power Pockit® 5W

TrescoBook_2019.indd 8

1-800-227-1171 | trescolighting.com

6/20/19 5:05 PM

Who We Are

TrescoBook_2019.indd 9

6/20/19 5:05 PM

TrescoBook_2019.indd 10

6/20/19 5:05 PM

Who We Are

Leader in LED Lighting Tresco® Lighting is the leader in premiere lighting solutions for store fixtures, commercial applications, residential cabinetry, and laboratory and hospitality furniture. With over 25 years of “Innovation Through Illumination” we proudly design and manufacture a full line of superior quality L.E.D. and fluorescent lighting options that are UL/ETL listed. Tresco Lighting is the trusted brand for all your project needs. Tresco was founded in 1989 to meet a growing demand for quality cabinet and casework lighting. In 1992, we designed and offered the first UL-listed, under cabinet track lighting system in North America. This ingenuity and success led to the rapid development and expansion of product lines targeting different segments of business. 25 years later, our goal remains the same: Provide innovative, functional and design savvy products for the office, laboratory, hospitality, furniture, store fixture, mill-work and kitchen industries. We welcome you to browse our catalog and learn more about our company and product offering.

The Company We Keep We are members in good standing with the most respected names in the business. Our customers can be confident that they’re dealing with a professional, reputable, reliable leader in the LED lighting industry.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 11

6/20/19 5:05 PM

Who We Are

First of many U.S. patents awarded to Tresco. (Elli® Series, 2008)

Tresco International launches first product. (Halogen Track Light, 1993)

Tresco launches new Luniform LED Technology. (SimpLED 2.0, 2014)

History 1989 Tresco® International opens operations 1993 Launched first product - Under Cabinet Track System UL issues first safety listing ever for a non-wall or ceiling track system to Tresco 1996 Launched Lumaflex, one of the first rope lighting systems in the USA 2000 Chris Tress joins Tresco and becomes general manager 2003 Construction on a modern facility began that doubled our size 2008 Patent issued for Elli® Linkable Light System 2009 Patent issued for Modular Light Rail Light System 2010 Patent issued for iMAGine® Shelf Light System 2011 Tresco acquired by Rev-A-Shelf®, LLC 2013 Patent issued for SimpLED Linear LED System 2014 Construction of new 300,000 square foot building 2015 Launched Infinex, a custom extrusion lighting solution 2016 Introduced FREEDiM Series of wireless controllers 2017 Introduced Z-Wave integration of FREEDiM Series for Smart Home compatibility

TrescoBook_2019.indd 12

1-800-227-1171 | trescolighting.com

6/20/19 5:06 PM

What We Do

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 13

6/20/19 5:06 PM

What We Do

Linear Lighting Tresco linear or “strip” lights are available in a range of styles, price points, outputs, and color temperatures.

Pockit® Lighting Tresco Pockit® or “puck” lights are available in a variety of configurations. Large or small, spot or accent, metal or plastic, linkable or non-linkable, Tresco has a “Pockit®” light for you.

Flexible Lights With Tresco’s FlexTape, you can have the flexibility you need without sacrificing the quality you demand. Whether back lighting a sign, edge lighting a display, or accent lighting Air Force One, Tresco’s line of flexible lights are all you need.

TrescoBook_2019.indd 14

1-800-227-1171 | trescolighting.com

6/20/19 5:06 PM

What We Do

Store Fixtures Tresco products are the perfect addition to your store fixture lighting. If we donâ&#x20AC;&#x2122;t stock what you need, we can custom design it for you. Tresco Lighting is the solution.

Commercial Furniture From desks to shelves, high quality Tresco Lighting products provide ideal lighting for the office at a low price.

Hospitality Whether the relaxing glow of a hotel room or the inviting radiance of a restaurant, lighting is an essential part of our lives and especially important when creating an atmosphere. Tresco is here to help you create an enjoyable guest experience, accentuate your brand, and save you money.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 15

6/20/19 5:06 PM

What We Do

Institutional Warrantied, safety tested, and built to withstand demanding environments, Tresco products are ideal for institutional locations. Whatever your application, our lights provide optimum task visibility at a minimal operational cost for cafeterias, libraries, hospitals, or laboratories.

Residential Furniture Incorporating lighting into your furniture raises the bar on the consumer experience for your brand. Worried about safety? So are we. That is why Tresco lighting products are UL or ETL listed.

Residential Cabinets Adding lighting to your residential cabinetry is easier than ever with Tresco Lighting. Our standard power supply and connectors work with the entire line of LED lighting â&#x20AC;&#x201D; no more trying to find what connector works with what power supply. Tresco Lighting is easy as 1-2-3.

TrescoBook_2019.indd 16

1-800-227-1171 | trescolighting.com

6/20/19 5:06 PM

Why Choose Us

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 17

6/20/19 5:06 PM

TrescoBook_2019.indd 18

6/20/19 5:06 PM

Why Choose Us

Quality Superior components ensure Tresco lights are up to 3X brighter and have a 60 degree wider light spread than the competition. We use world-renowned suppliers who employ static and dust-free clean rooms, proper binning, and use of high-grade phosphors to achieve efficiency, high lumen, and color consistency. When it comes to LED, the diode makes the difference. That is why we use brands like Nichia and Cree.

Independent Testing We don’t just say our lights are better — we prove it. Independent testing certifies IES photometric guidelines and that practices were adhered to in providing accurate measurements of luminaire characteristics. IES charts are printed next to our lights for proper specification of our products.

Safety Listings At Tresco, safety is a top priority. All of our products carry UL, ETL or QPS safety certifications. CE marking permits a product to be sold throughout the European Union. It is a conformity mark noting the product complies with all applicable European directives.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 19

6/20/19 5:06 PM

Why Choose Us

We Make Lighting Easy Easy as 1 - 2 - 3. 1) Universal power supply 2) Controller connects to the power supply 3) Light fixture connects to the controller

Universal System Tresco’s in-house design and manufacturing teams create LED lights to work with one power source. Other products require different power supplies for different lights, but Tresco’s LED lights are designed to work with a single 12VDC power supply. No more wiring nightmares.

In-House Design We are not your typical lighting company. From art to part, we design and manufacture custom lighting solutions based on your specific needs.

Luniform Luniform is the technology to eliminate “dotted” appearances and reduce unwanted glare within light emitting diode fixtures. See Page 8 for more info.

TrescoBook_2019.indd 20

1-800-227-1171 | trescolighting.com

6/20/19 5:07 PM

Why Choose Us

Direct Sales Representative Independent Sales Representative

Distribution Network Tresco products are stocked with over 100 distributors in North America, giving you same day or next day delivery.

OEM Network Our OEM network includes some of the largest and most respected manufacturers in the business. This helps us achieve economies of scale that result in cost savings for you.

Our Team Representatives from the Tresco Lighting Sales & Customer Service teams are in the field and ready to help you find the right product for your application.

TrescoBook_2019.indd 21

6/20/19 5:07 PM

Why Choose Us

Worldwide Corporate Headquarters in Louisville, Ky

If you would like to know more about our full line of lighting products, visit us at trescolighting.com or call us 1-800-227-1171.

TrescoBook_2019.indd 22

1-800-227-1171 | trescolighting.com

6/20/19 5:07 PM

12VDC PUCK LIGHTING

Pockit 1W ®

90°

48 Lumens TrescoBook_2019.indd 23

6/20/19 5:07 PM

Pockit® 1W

Long life, minimal maintenance, and brilliant performance for just pennies a day— that’s the Pockit® LED. The technology in the 1W replaceable LED chip provides constant illumination and exceptionally accurate color rendering, all without the high energy consumption and heat generation of traditional lights.

Surface mount ring sold separately

Easy-to-replace 1W LED chip

Available in multiple finishes

Features:

Typical Applications:

90º beam spread

Interior cabinet

25,000 hr. life, easy-to-replace LED chip

Under cabinet

Durable all-metal construction

Accent lighting

Dimmable

Retrofit existing halogen or xenon fixtures

Available Finishes:

White (WH)

TrescoBook_2019.indd 24

Black (BL)

Chrome (CH)

Nickel (NI)

Antique Brass (AB)

1-800-227-1171 | trescolighting.com

6/20/19 5:08 PM

Pockit® 1W

Specifications:

Dimensions: Actual Size

Front

Wattage

Lumens

Efficacy (lm/W)

Input Voltage 2-13/16” (72 mm)

12VDC/AC

Diode Life

25,000 Hours

Max Per 60W Power Supply

60 Fixtures

Max Continuous Run

N/A

Mounting

Recess/Surface

Warranty

1 Year

Certifications

Beam Angle 79” (2 m)

90° Photometric Data

Height

Light Output

1ft

19.70Fc

3ft

2.19Fc (23.6lx)

(2.2 m L x 2.2 m W)

6ft

0.55Fc

14.1ft L x 14.2ft W

(.3 m) (.9 m) (1.8 m)

(212lx)

Beam Area 2.4ft L x 2.4ft W

(.73 m L x .73 m W)

7.1ft L x 7.1ft W

(5.9lx)

(4.3 m L x 4.3 m W)

L-POC-LED-C Tested

Color Temperature

Side

Warm White

Warm to Neutral

Cool White

Daylight

1/2” (13 mm) 2700K

2-1/8” (54 mm)

3000K

4500K

Warm (2700K)

5500K

6500K

Cool (4800K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 25

6/20/19 5:08 PM

12. Metal Puck Body – POC-WX

042308 032009

® Pockit 1W 2-13/16 in. 72 mm

Required Items Pockit® 1W 12. Metal Puck Body – POC-WX

042308 032009

2-13/16 in. 72 mm

1/2 in. 13 mm

79 in. 2m

2-1/8 in. 54 mm

Part #

Description

L-POC-LED-CAB-M-1

1W 4800K Antique Brass LED Pockit® Light

L-POC-LED-CBL-M-1

1W 4800K Black LED Pockit® Light

L-POC-LED-CCH-M-1

1W 4800K Chrome LED Pockit® Light

L-POC-LED-CNI-M-1

1W 4800K Nickel LED Pockit® Light

L-POC-LED-CWH-M-1

1W 4800K White LED Pockit® Light

L-POC-LED-WAB-M-1

1W 2700K Antique Brass LED Pockit® Light

L-POC-LED-WBL-M-1

1W 2700K Black LED Pockit® Light

L-POC-LED-WCH-M-1

1W 2700K Chrome LED Pockit® Light

L-POC-LED-WNI-M-1

1W 2700K Nickel LED Pockit® Light

L-POC-LED-WWH-M-1

1W 2700K White LED Pockit® Light

2-1/8” (54 mm) hole required for recessed mounting. Pockit® Metal Body includes LED Chip, AMP® Connector, and 79” (2 m) input lead. All Pockit® lights can be either surface mounted or recess mounted. Surface mount ring sold separate.

Power Supplies

Part #

L-DC-ELT12-CON-1

12VDC

COMPONEN TS

Power Supplie s

13. Metal Surface Mount Ring – Spacer M 1/2 in. 13 mm

79 in.

2m For details see 2-1/8 in. Power Supplies on 54 mm Page 141.

2-13/16 in. 72 mm

Description 042408

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

* Dimmable on trailing edge (12V side). Mounting block and power cord are included. † Dimmable by traditional line voltage (120V) wall dimmers. Mounting block included requires electrician to install.

Optional Items Surface Mount Ring - Metal

13. Metal Surface Mount Ring – Spacer M

2-13/16 in. 72 mm

Part #

Description

L-SPACER-AB-M-1

Metal Surface Mount Ring, Antique Brass

L-SPACER-BL-M-1

Metal Surface Mount Ring, Black

L-SPACER-CH-M-1

Metal Surface Mount Ring, Chrome

L-SPACER-NI-M-1

Metal Surface Mount Ring, Nickel

L-SPACER-WH-M-1

Metal Surface Mount Ring, White

042408

3/4 in. 20 mm Thru-way for wire exit mm 1-5/16 in.

Replacement LED Chip - 1W

mm 1 in.

Part #

Description

L-LB-LED-CDSK-1

1W 4800K 12VDC/AC LED Replacement Chip

L-LB-LED-WDSK-1

1W 2700K 12VDC/AC LED Replacement Chip

25,000 E.O.L. hours Consult manufacturer for 12V AC power supply minimum draw requirements.

mm 1-5/16 in.

3/4 in.

20 mm 12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141. Thru-way for wire exit

TrescoBook_2019.indd 26

1-800-227-1171 | trescolighting.com

6/20/19 5:08 PM

12VDC PUCK LIGHTING

Pockit Plus 1.5W ®

90°

45 Lumens TrescoBook_2019.indd 27

6/20/19 5:08 PM

Pockit® Plus 1.5W

Pockit® Plus features clean and simple lines PLUS cutting-edge bulb technology that provide powerful, bright light without the energy consumption and heat. Performance and effortless installation for recess or surface mounting all at a competitive price — that’s the power of PLUS.

Thin profile: Just 1/4” (6 mm) depth when recessing

Available in 4 finishes

3/8” (9.5 mm) when surface mounting

Features:

Typical Applications:

90º beam spread

Displays

Surface mount ring included

Mid-level flood light

Dimmable

Interior cabinets Under cabinets

Available Finishes:

White (WH)

TrescoBook_2019.indd 28

Black (BL)

Nickel (NI)

Oil Rubbed Bronze (ORB)

1-800-227-1171 | trescolighting.com

6/20/19 5:09 PM

Pockit® Plus 1.5W

Specifications:

Dimensions: Actual Size

Front

2-1/2” (63 mm)

Wattage

1.5W

Lumens

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

25,000 Hours

Max Per 60W Power Supply

40 Fixtures

Max Continuous Run

N/A

Mounting

Recess/Surface

Warranty

1 Year

Certifications

Beam Angle 79” (2 m)

90° Photometric Data

Height

Light Output

1ft

18.50Fc

3ft

2.06Fc (22.2lx)

(2.2 m L x 2.2 m W)

6ft

.51Fc

14.4ft L x 14.4ft W

(.3 m) (.9 m)

Side

(1.8 m)

Beam Area 2.4ft L x 2.4ft W

(.7 m L x .7 m W)

(198lx)

7.2ft L x 7.2ft W

(5.5lx)

(4.4 m L x 4.4 m W)

L-POC-1LEDSFR-C Tested

1/4” (6 mm)

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

2-1/4” (57 mm) 2700K

Mounting Ring

3000K

4500K

Warm (3000K) 3/8” (9 mm)

6500K

Cool (5000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 29

5500K

6/20/19 5:09 PM

Pockit® Plus 1.5W

All product dimensions and specifications are subject to change without prior notice.

POC 3W Metal Surface Mount Ring

Required Items Pockit® Plus 1.5W

011510

Part #

Description

L-POC-1LEDSFR-CBL-1

1.5W 5000K Black LED Metal Pockit® Light

L-POC-1LEDSFR-CNI-1 2-1/2” 1.5W 5000K Nickel LED Metal Pockit® Light

(63 mm) 1.5W 5000K Oil Rubbed Bronze Pockit® Light L-POC-1LEDSFR-CORB-1 2-1/2 in. 63 mm

1/4 in. 6 mm

79 in. 2m 2-1/4 in. 57 mm

L-POC-1LEDSFR-CWH-1

1.5W 5000K White LED Metal Pockit® Light

L-POC-1LEDSFR-WBL-1

1.5W 3000K Black LED Metal Pockit® Light

L-POC-1LEDSFR-WNI-1

1.5W 3000K Nickel LED Metal Pockit® Light

L-POC-1LEDSFR-WORB-1

1.5W 3000K Oil Rubbed Bronze Pockit® Light

L-POC-1LEDSFR-WWH-1

1.5W 3000K White LED Metal Pockit® Light

2-1/4” (57 mm) hole required for recessed mounting. 25,000 useful life hours. Pockit® Plus Includes 79“ (2 m) Starter Cord, Surface Mount Ring, and AMP® Connector.

3/8 in.

mm POC 3W10Metal Surface Mount Ring

Mounting Ring

011510

Thru-way for wire exit

Surface Mount Ring

2-1/2” (63 mm)

3/8” (9 mm)

2-1/2 in. 63 mm

Thru-way for wire exit

Surface Mount Ring is included with each light.

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1† L-DCE60D-CON-1†

3/8”12VDC 20W Dimmable LED Power Supply (9 mm)

Thru-way for wire exit

12VDC 60W Dimmable LED Power Supply

57 mm (2-1/4 in.)

6 mm (1/4 in.)

12V COMPONENTS: SUPPLIES, CONTROLLERS & MORE SEE PAGE 141. 5 mm (3/16POWER in.)

TrescoBook_2019.indd 30

1-800-227-1171 | trescolighting.com 10 mm (3/8 in.)

6/20/19 5:09 PM

12VDC PUCK LIGHTING

Power Pockit 3W ®

120°

234 Lumens TrescoBook_2019.indd 31

6/20/19 5:09 PM

Power Pockit® 3W

The Power Pockit® 3W is a versatile choice offering flood and task lighting that can be used for interior cabinets, under cabinets and store displays. This 3W energy efficient LED provides a crisp, uniform wash over illuminated objects at a fraction of the price of halogen.

Available in multiple finishes

Thin profile: Just 1/4” (6 mm) depth when recessing

Frosted diffuser lens provides even illumination

3/8” (9.5 mm) when surface mounting

Typical Applications:

Features: Wide 120º beam spread

Displays

Surface mount ring included

Store fixtures

High output (234 lumens),

Interior/under cabinets

Luniform output - no “dots”

Task lighting

Dimmable Commercial grade 3-year warranty

Available Finishes:

White (WH)

TrescoBook_2019.indd 32

Black (BL)

Chrome (CH)

Nickel (NI)

Antique Brass (AB) Oil Rubbed Bronze (ORB)

1-800-227-1171 | trescolighting.com

6/20/19 5:10 PM

Power Pockit® 3W

Specifications:

Dimensions: Actual Size

Front

2-1/2” (63 mm)

Wattage

Lumens

234

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

50,000 Hours

Max Per 60W Power Supply

20 Fixtures

Max Continuous Run

N/A

Mounting

Recess/Surface

Warranty

3 Year

Certifications

Beam Angle 79” (2 m)

120° Photometric Data

Height

Light Output

Beam Area

1ft

81.30Fc

3.1ft L x 3.1ft W

3ft

9.03Fc (97.2lx)

(2.8 m L x 2.8 m W)

6ft

2.26Fc

18.4ft L x 18.4ft W

(.3 m) (.9 m)

Side

(1.8 m)

(1 m L x 1 m W)

(875.1lx)

9.2ft L x 9.2ft W

(24.3lx)

(5.6 m L x 5.6 m W)

L-POC-3LEDSFR-C Tested

1/4” (6 mm)

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

2-1/4” (57 mm) 2700K

Surface Mount Ring

3000K

4500K

Warm (3000K) 3/8” (9 mm)

6500K

Cool (5000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 33

5500K

6/20/19 5:10 PM

2-1/2”

® (63 mm)Pockit 3W Power

All product dimensions and specifications are subject to change without prior notice.

Required Items Part #

3W Power Pockit®

POC 3W Metal Surface Mount Ring

L-POC-3LEDSFR-CAB-1

Metal Puck Body – POC-3W

011510

Description

3W 5000K Antique Brass LED Pockit® Light

011510

L-POC-3LEDSFR-CBL-1

3W 5000K Black LED Pockit® Light

L-POC-3LEDSFR-CCH-1

3W 5000K Chrome LED Pockit® Light

L-POC-3LEDSFR-CWH-1

3W 5000K White LED Pockit® Light

L-POC-3LEDSFR-WAB-1

3W 3000K Antique Brass LED Pockit® Light

L-POC-3LEDSFR-WBL-1

3W 3000K Black LED Pockit® Light

L-POC-3LEDSFR-WCH-1

3W 3000K Chrome LED Pockit® Light

L-POC-3LEDSFR-WNI-1

3W 3000K Nickel LED Pockit® Light

L-POC-3LEDSFR-WORB-1

3W 3000K Oil-Rubbed Bronze LED Pockit® Light

L-POC-3LEDSFR-WWH-1

3W 3000K White LED Pockit® Light

2-1/2” L-POC-3LEDSFR-CNI-1 (63 mm) 3W 5000K Nickel LED Pockit® Light

2-1/2” (63 mm)

1/4” (6 mm)

79” (2 m) 2-1/4” (57 mm)

POC 3W

50,000 useful hours. 57 mm (2-1/4”) hole required for recessed mounting. Power Pockit® includes Surface Mount Ring, AMP® Connector, and 79” (2 m) of input lead. Metal All Surface Pockit® Mount lights canRing be either surface 011510 mounted or recess mounted.

Surface Mount Ring

3/8” (9 mm)

2-1/2” (63 mm) 1/4” (6 mm)

Thru-way for wire exit

79” (2 m) 2-1/4” (57 mm)

Surface Mount Ring is included with each light.

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1† L-DCE60D-CON-1†

12VDC 20W Dimmable LED Power Supply

3/8” (9 mm) 12VDC 60W Dimmable LED Power Supply

Thru-way for(12V wire side). exit Mounting block and power cord are included. * Dimmable on trailing edge † Dimmable by traditional line voltage (120V) wall dimmers. Mounting block included requires electrician to install.

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 34

1-800-227-1171 | trescolighting.com

6/20/19 5:10 PM

12VDC PUCK LIGHTING

Power Pockit 5W ®

100°

290 Lumens TrescoBook_2019.indd 35

6/20/19 5:10 PM

Power Pockit® 5W

The next generation of Power Pockit® is an astounding 2.5X brighter than our original industry leading 3W version. With Luniform technology, 290 lumens of light are evenly distributed and eliminate the “dotted” appearance on surfaces. At only 1/4” (6 mm) depth, the Power Pockit® 5W is the slimmest, highest output puck light on the market.

Luniform technology provides superior light output and uniform light spread without any “dots”

Surface mount ring included

Thin profile: Just 1/4” (6 mm) depth when recessing 3/8” (9.5 mm) when surface mounting

Features:

Typical Applications:

Wide 100º beam spread

Displays or store furniture

Available in white, black, nickel and oil rubbed bronze

Task or flood lighting

High output (290 lumens)

Interior cabinets/shelving

Dimmable

Under cabinets

Luniform Technology – no visible diodes on surface of fixture Commercial grade 3-year warranty

Available Finishes:

White (WH)

TrescoBook_2019.indd 36

Black (BL)

Nickel (NI)

Oil Rubbed Bronze (ORB)

1-800-227-1171 | trescolighting.com

6/20/19 5:11 PM

Power Pockit® 5W

Specifications:

Dimensions: Actual Size

Front

2-1/2” (63 mm)

Wattage

Lumens

290

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

50,000 Hours

Max Per 60W Power Supply

12 Fixtures

Max Continuous Run

N/A

Mounting

Recess/Surface

Warranty

3 Years

Certifications

Beam Angle 79” (2 m)

100° Photometric Data

Height

Light Output

Beam Area

1ft

115.90Fc

2.4ft L x 2.5ft W

3ft

12.88Fc (138.6lx)

(2.2 m L x 2.3 m W)

6ft

3.22Fc

14.6ft L x 14.8ft W

(.3 m) (.9 m)

Side

(1.8 m)

(1247.5lx)

(34.7lx)

(.73 m L x .76 m W)

7.3ft L x 7.4ft W

(4.5 m L x 4.5 m W)

POC-5LED-C Tested

1/4” (6 mm)

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

2-1/4” (57 mm) 2700K

Mounting Ring

3000K

4500K

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 37

6500K

Cool (5000K)

Warm (3000K) 3/8” (9 mm)

5500K

6/20/19 5:11 PM

2-1/2”

® (63 mm)Pockit 5W Power

All product dimensions and specifications are subject to change without prior notice.

POC 3W Metal Surface Mount Ring

011510

Required Items 5W Power Pockit®

Part #

Metal Puck Body – POC-3W

Description

011510

® L-POC-5LEDSCL-WORB-1 2-1/2” 5W 3000K Oil-Rubbed Bronze LED Pockit Light

L-POC-5LEDSCL-WNI-1 (63 mm)5W 3000K Nickel LED Pockit® Light

2-1/2” (63 mm)

1/4” (6 mm)

5W 5000K Nickel LED Pockit® Light

L-POC-5LEDSCL-WBL-1

5W 3000K Black LED Pockit® Light

L-POC-5LEDSCL-CBL-1

5W 5000K Black LED Pockit® Light

L-POC-5LEDSCL-WWH-1

5W 3000K White LED Pockit® Light

L-POC-5LEDSCL-CWH-1

5W 5000K White LED Pockit® Light

50,000 useful hours. 2-1/4” (57 mm) hole required for recessed mounting. Power Pockit® includes Surface Mount Ring, AMP® Connector, and 79” (2 m) input lead. All Pockit® lights can be either surface mounted or recess mounted.

79” (2 m) 2-1/4” (57 mm)

L-POC-5LEDSCL-CNI-1

POC 3W Metal Surface Mount Ring

011510

Surface Mount Ring

3/8” (9 mm)

2-1/2” (63 mm)

1/4” (6 mm)

Thru-way for wire exit

79” (2 m) 2-1/4” (57 mm)

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1† L-DCE60D-CON-1†

12VDC 20W Dimmable LED Power Supply

3/8” (912VDC mm) 60W Dimmable LED Power Supply

for side). wire exit * Dimmable on trailingThru-way edge (12V Mounting block and power cord are included. † Dimmable by traditional line voltage (120V) wall dimmers. Mounting block included requires electrician to install.

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 38

1-800-227-1171 | trescolighting.com

6/20/19 5:11 PM

12VDC PUCK LIGHTING

Pockit Point ®

90°

69 Lumens TrescoBook_2019.indd 39

6/20/19 5:11 PM

Pockit® Point

1W Pockit® Point is the smallest LED spot light on the market. Its small diameter and focused light is perfect for highlighting items in tight spaces. The Pockit® Point features a very low profile with a recess depth of only 7/16” (11 mm), a collar spring for quick recessing, a mini converter to protect the LED diode from premature failure and a 79” (2 m) starter cord attached with a loose AMP® connector for easier wire routing.

Spring clip mounted

Tiny 1” (25 mm) diameter

Available in 3 finishes

Features:

Typical Applications:

Nearly 70 lumens of output

Displays or store fixtures

90º beam spread

Museum cases

1” (25 mm) diameter, 1/2” (13 mm) recess depth

Accent lighting Interior cabinets and shelving Closets Small light boxes

Available Finishes:

White (WH)

TrescoBook_2019.indd 40

Black (BL)

Nickel (NI)

1-800-227-1171 | trescolighting.com

6/20/19 5:11 PM

Pockit® Point

Dimensions:

Specifications:

Front

Actual Size

Wattage

Lumens

Efficacy (lm/W)

1-3/16” (30 mm)

Input Voltage

12VDC

Diode Life

30,000 Hours

Max Per 60W Power Supply

79” (2 m)

30 Fixtures

Max Per Continuously Run

Side

N/A

Mounting

Recessed

Warranty

1 Year

Certifications 1/2” (13 mm)

Beam Angle

1” (25 mm)

90° Photometric Data

Height

Light Output

Beam Area

1ft

37.60Fc

1.9ft L x 1.9ft W

3ft

4.18Fc (45lx)

(1.8 m L x 1.8 m W)

6ft

1.04Fc

11.6ft L x 11.5ft W

(.3 m) (.9 m) (1.8 m)

(.58 m L x .58 m W)

(404.7lx)

5.8ft L x 5.8ft W

(11.2lx)

(3.5 m L x 3.5 m W)

L-LED-1EB-C Tested

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Warm (3000K)

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 41

6/20/19 5:11 PM

Pockit® Point

All product dimensions and specifications are subject to change without prior notice.

Required Items Pockit® Point LED Series 1-3/16” (30 mm) 1/2 in. (13 mm)

1” (25 mm)

13/16” (21 mm)

79” (2m)

8 ft.

Part #

Description

L-LED-1EB-CBL-1

1W 12VDC Pockit® Point, 5000K, Black

L-LED-1EB-CNI-1

1W 12VDC Pockit® Point, 5000K, Nickel

L-LED-1EB-CWH-1

1W 12VDC Pockit® Point, 5000K, White

L-LED-1EB-WBL-1

1W 12VDC Pockit® Point, 3000K, Black

L-LED-1EB-WNI-1

1W 12VDC Pockit® Point, 3000K, Nickel

L-LED-1EB-WWH-1

1W 12VDC Pockit® Point, 3000K, White

30,000 useful life hours. 1” (25 mm) hole required for recessed mounting. Collar Spring, 79” (2 m) Starter Cord, and AMP® Connector are included with each light. 11/16” (17 mm)

7/16” (11 mm)

6” (152 mm)

30 mm -3/16 in.

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

79” (2m)

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 42

1-800-227-1171 | trescolighting.com

6/20/19 5:11 PM

12VDC PUCK LIGHTING

Pockit Spot ®

30°

179 Lumens TrescoBook_2019.indd 43

6/20/19 5:11 PM

Pockit® Spot

The 3W Pockit® Spot performs like a spotlight with a high focus output beam to keep countertops, kiosks and displays center stage. The fixture features an exceptionally low profile and two large springs for recess mounting in a depth of only 1-1/8” (29 mm). The 3W Pockit® Spot has the ability to swivel in either direction.

Available in black or nickel

Fixture tilts 12° in either direction

Features:

Typical Applications:

Focused 30° beam spread

Kiosks

Dimmable

Flyovers

Strong spring clip for recessing

Displays or store fixtures

All metal construction

Murphy beds

Commercial grade 3-year warranty

Elevators

Available Finishes:

Black (BL)

TrescoBook_2019.indd 44

Nickel (NI)

1-800-227-1171 | trescolighting.com

6/20/19 5:12 PM

Pockit® Spot

Specifications:

Dimensions: Actual Size

Front

Wattage

Lumens

179

Efficacy (lm/W)

59.7

Input Voltage 2-5/16” (59 mm)

12VDC

Diode Life

50,000 Hours

Max Per 60W Power Supply

20 Fixtures

Max Continuous Run

N/A

Mounting

Recessed

Warranty

3 Years

Certifications 79” (2 m)

Beam Angle

30° Photometric Data

Height

Light Output

Beam Area

1ft

1,012.90Fc

.4ft L x .4ft W

3ft

112.54Fc (1211.4lx)

(.34 m L x .34 m W)

6ft

28.14Fc

2.2ft L x 2.2ft W

(.3 m) (.9 m) (1.8 m)

(10902.8lx)

(120.6lx)

(.12 m L x .12 m W)

1.1ft L x 1.1ft W

(.67 m L x .67 m W) L-LED-3DSP-C Tested

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

1-1/8” (29 mm)

2700K

3000K

4500K

Warm (3000K)

2-1/8” (54 mm) Blue collar springs for mounting purposes only, not visible after install.

6500K

Cool (5000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 45

5500K

6/20/19 5:12 PM

Pockit® Spot

All product dimensions and specifications are subject to change without prior notice.

Required Items Pockit® Spot

79 in. 2m 2-1/8 in. 54 mm

2-5/16 in. (59 mm)

Part #

Description

L-LED-3DSP-CNI-1

3W 5000K Satin Nickel Recess Pockit® Swivel Spot

L-LED-3DSP-WNI-1

3W 3000K Satin Nickel Recess Pockit® Swivel Spot

L-LED-3DSP-CBL-1

3W 5000K Black Recess Pockit® Swivel Spot

L-LED-3DSP-WBL-1

3W 3000K Black Recess Pockit® Swivel Spot

50,000 useful life hours. 2-1/8” (54 mm) hole required for recessed mounting. Starter Cord 79” (2 m), and AMP® Connector are included with each light.

1-1/8 in. 29 mm

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

12°

29 mm 1-1/8 in.

8 ft.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

2-5/16 in. (59 mm)

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 46

1-800-227-1171 | trescolighting.com

12°

6/20/19 5:12 PM

12VDC PUCK LIGHTING

Pockit Adapt ®

60°

45°

25°

250 Lumens TrescoBook_2019.indd 47

6/20/19 5:12 PM

Pockit® Adapt

As the name suggests, this Pockit® is adaptable to specific applications using one of three included lenses. Whether your application calls for a narrow or wide angle spot, only a simple change of the lens is needed. The 3/8” depth (9.5 mm) makes this one of the lowest profile spot lights in the industry while generating a staggering 250 lumen output.

3 beam-angle changing lenses included

Features:

Recess or surface mount

Typical Applications:

High output 5W LED

Kiosks and displays

Dimmable

Flyovers

Recess or surface mount

Cabinets and soffits

3 beam-angle changing lenses included: 25º, 45º, 60º

Murphy beds

Commercial grade 3-year warranty

Elevators

Available Finishes:

White (WH)

TrescoBook_2019.indd 48

Black (BL)

Nickel (NI)

1-800-227-1171 | trescolighting.com

6/20/19 5:12 PM

Pockit® Adapt

Specifications:

Dimensions: Actual Size 79” (2 m)

Front

Wattage

Lumens

250

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

3” (76 mm)

50,000 Hours

Max Per 60W Power Supply

12 Fixtures

Max Continuous Run

N/A

Mounting

Recess/Surface

Warranty

3 Year

Certifications

Beam Angle Side 3/8” (9.5 mm)

60°

45°

25°

With 60° Lens

With 45° Lens

With 25° Lens

Photometric Data

2-5/8” (67 mm)

Surface Mount Ring

See back page for complete data

Color Temperature 5/8” (16 mm)

Warm White

2700K

3” (76 mm)

Warm to Neutral

3000K

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

Warm (3000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 49

6/20/19 5:12 PM

Pockit® Adapt LED Lights • L -POC-5ADJ

082814

3" (76mm)

Pockit® Adapt

3" (76mm) ® Pockit Adapt Trim Ring • L -ADJTKIT

All product dimensions and specifications are subject to change without prior notice. 082114

(1) Surface Mounting Ring and (1) Trim Ring are packaged together in Trim Kit

Required Items

® ® Pockit Adapt LED Lights • L -POC-5ADJ Pockit Adapt ®

082814

Pockit Adapt Surface Mounting Ring • L -ADJTKIT Shown with Trim Ring

082814

(1) Surface Mounting Ring and (1)Trim Ring are packaged together in Trim Kit

5/8" (16mm)

3.0" (76mm)

Part #

Description

L-POC-5ADJ-W-1

12V 5W Pockit® Adapt, 3000K

L-POC-5ADJ-C-1

12V 5W Pockit® Adapt, 5000K Shown with Trim Ring

3" 2-3/4" (76mm) (70mm)

50,000 useful life hours. 5/8" 2-5/8” (67 mm) hole(16mm) required for recessed mounting. 79” (2 m) Starter Cord, and AMP® Connector 2-3/4"are included with each light. (70mm) Trim kit purchased separately.

Shown with Surface Mounting Ring

3/4" (19mm)

Shown with Trim Ring

5/8" (16mm)

3" (76mm)

Shown with Surface Mounting Ring

3/4" (19mm)

3" (76mm)

2-3/4" (70mm)

Shown with TrimShown Ring with

3/4" 5/8" (19mm)

Part #

Description

L-ADJTKIT-WH-1

Pockit® Adapt Trim Kit, White

L-ADJTKIT-BL-1

Pockit® Adapt Trim Kit, Black

L-ADJTKIT-NI-1

Pockit® Adapt Trim Kit, Nickel

Surface Mounting Ring

Pockit® Adapt Trim Kit

(16mm)

2-3/4" (76mm) (70mm)

Trim Ring 3/16" (5mm) 3/4" Mounting Ring Surface

3" (76mm)

Shown with Surface Mounting Ring

(19mm)

(1) Surface Mounting Ring and (1) Trim Ring are packaged together in Trim Kit

3" (76mm)

5/8" (16mm)

3" (76mm)

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

Specifications (Cont.) Photometric Data Height

Light Output (60° Lens)

Light Output (45° Lens)

Light Output (25° Lens)

1ft

201.20Fc

456.80Fc

854.00Fc

3ft

22.36Fc

50.76Fc

94.89Fc

(1021.39lx)

(1 m L x 1 m W)

(.61 m L x .61 m W)

(.43 m L x .43 m W)

6ft

5.59Fc

12.69Fc

23.72Fc

6.8ft L x 6.7ft W

4ft L x 4ft W

2.8ft L x 2.8ft W

(.3 m) (.9 m) (1.8 m)

(2165.70lx) (240.68lx) (60.17lx)

(4916.95lx) (546.38lx) (136.59lx)

(9192.38lx)

(255.32lx)

Beam Area (60° Lens) 1.1ft L x 1.1ft W

(.34 m L x .34 m W)

3.4ft L x 3.3ft W

(2.1 m L x 2 m W)

Beam Area (45° Lens) .7ft L x .7ft W

(.21 m L x .21 m W)

2ft L x 2ft W

(1.22 m L x 1.22 m W)

Beam Area (25° Lens) .5ft L x .5ft W

(.15 m L x .15 m W)

1.4ft L x 1.4ft W

(.85 m L x .85 m W) L-POC-5ADJ-C Tested

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 50

1-800-227-1171 | trescolighting.com

6/20/19 5:12 PM

12VDC PUCK LIGHTING

3W EquiLine Puck 100Â°

218 Lumens TrescoBook_2019.indd 51

6/20/19 5:12 PM

3W EquiLine Puck With recessed or surface mount ability, EquiLine LED Pucks are perfect for use in a wide range of applications. Designed for the economically conscious, they feature a slim profile and a 79” (2 m) starter cord attached with an unattached AMP® connector for easy wire routing.

Available in black or nickel

Surface mount ring sold separately

Features:

Typical Applications:

100° beam spread

Furniture

Low profile

Desk

Dimmable

Headboards

No dotted LED “hot spot” reflection on countertop

Closet Cabinets & light boxes

Available Finishes:

Black (BL)

TrescoBook_2019.indd 52

Nickel (NI)

1-800-227-1171 | trescolighting.com

6/20/19 5:12 PM

3W EquiLine Puck

Specifications:

Dimensions: Front

2-1/2” (64 mm)

Wattage

Lumens

218

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

25,000 Hours

Max Per 60W Power Supply

20 Fixtures

Max Continuous Run

N/A

Mounting

Recess/Surface

Warranty

1 Year

Certifications 79” (2 m)

Beam Angle

100° Photometric Data

Height

Light Output

Beam Area

1ft

89.00Fc

2ft diameter

3ft

9.89Fc

(106.5lx)

(2.1 m diameter)

6ft

2.47Fc

14ft diameter

(.3 m) (.9 m) (1.8 m)

(.6 m diameter)

(958lx)

7ft diameter

(26.6lx)

(4.3 m diameter) L-POC-3EQFR-CNI Tested

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 2700K

1/2” (13 mm)

2-1/4” (57 mm)

3000K

Warm (3000K)

5500K

6500K

Cool (5000K)

IES data verified by Underwriters Laboratory.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 53

4500K

6/20/19 5:13 PM

3W EquiLine Puck

All product dimensions and specifications are subject to change without prior notice.

Required Items EquiLine Puck Light Metal Puck Body – POC-3W

011510

2-1/2” (63 mm)

Part #

Description

L-POC-3EQFR-CBL-1

3W EquiLine Puck 5000K - Black

L-POC-3EQFR-WBL-1

3W EquiLine Puck 3000K - Black

L-POC-3EQFR-CNI-1

3W EquiLine Puck 5000K - Nickel

L-POC-3EQFR-WNI-1

3W EquiLine Puck 3000K - Nickel

25,000 useful life hours. 2-1/4” (57 mm) hole required for recessed mounting. EquiLine includes starter cord 79” (2 m) and AMP® Connector with each light.

1/2” (13 mm)

79” (2 m)

POC 3W Metal Surface Mount Ring

011510

2-1/4” (57 mm)

12VDC

COMPONEN TS

Power Supplie s

63 mm 2-1/2 in.Power Supplies

1/4” (6 mm)

For details see79” (2 m) Power Supplies on 2-1/4” Page 141. (57 mm)

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

Optional Items EquiLine Puck Surface Ring 9 1/2” mm 3/8 in.

(13 mm) 2-1/2” Thru-way for wire exit (64 mm)

Part #

Description

L-SMR-2LED-BL-1

EquiLine Puck Surface Ring Black

L-SMR-2LED-NI-1

EquiLine Puck Surface Ring Nickel

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 54

1-800-227-1171 | trescolighting.com

6/20/19 5:13 PM

12VDC PUCK LIGHTING

Solo 100Â°

94 Lumens TrescoBook_2019.indd 55

6/20/19 5:13 PM

Solo

A spotlight worthy of a SOLO performance. The unique shallow rim mounts flush to create a seamless transition from light to the surrounding surface. Revolutionary CSR (Center Spot Reduction) optics eliminate glare making it visually appealing whether turned on or off.

Center spot reduction

Features:

Thin profile

Typical Applications:

Slim profile

Kiosks

Recessed installation

Shelves

Detachable starter cord

Displays or store fixtures

Center Spot Reduction technology

Cabinets

Commercial grade 3-year warranty

Soffits

Available Finishes:

Nickel (NI)

TrescoBook_2019.indd 56

Black (BL)

1-800-227-1171 | trescolighting.com

6/20/19 5:13 PM

Solo

Specifications:

Dimensions: Actual Size

Front

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

2-33/64” (64 mm)

12 VDC

Diode Life

20,000 Hours

Max Per 60W Power Supply

Mounting

Recess

Warranty

3 Year

Certifications

79” (2 m)

Beam Angle

100° Side

Photometric Data

Height

Light Output

Beam Area

1ft

35.90Fc

2.7ft

3ft

3.99Fc (42.9lx)

(2.4m)

6ft

1Fc

16ft

(.3 m) (.9 m)

33/64” (13 mm) (Recessed Depth

(1.8 m)

(.8 m)

(386.4lx)

8ft

(10.7lx)

(4.8m) L-HSOLO-CBL Tested

Color Temperature 2-1/8” (54 mm)

Warm White

2700K

Warm to Neutral

3000K

Warm (3000K)

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Underwriters Laboratory

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 57

6/20/19 5:13 PM

2-33/64” (75 mm)

Solo

All product dimensions and specifications are subject to change without prior notice.

Required Items Solo

Solo

Part #

Description

L-HSOLO-CNI-1

12VDC 2W Solo, 5000K, Nickel

L-HSOLO-WBL-1

Solo 12VDC 2W Solo, 3000K, Black

061915

20,00 useful life hours. 2-1/8” (54 mm) hole required for recessed mounting. Includes starter cord 79” (2 m) and AMP connector with each light

061915

2-33/64” (75 mm)

79” (2 m)

33/64” (13 mm)

2-1/8” (54 mm)

2-33/64” (75 mm)

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

(54 mm) 18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

33/64” (13 mm)

2-1/8”

33/64” (13 mm)

2-1/8” (54 mm)

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 58

1-800-227-1171 | trescolighting.com

6/20/19 5:13 PM

12VDC PUCK LIGHTING

Swing 100Â°

126 Lumens TrescoBook_2019.indd 59

6/20/19 5:14 PM

Swing

Create a standout design with the lowest 360 degree swiveling puck light on the market. The innovative, interchangeable ball and socket design give you incomparable versatility. The built-in glare eliminating CSR (Center Spot Reduction) technology creates a visually appealing fixture whether switched on or off.

Surface mount ring included

15Ë&#x161; pivoting face in any direction

Features:

Typical Applications:

Slim profile

Kiosks

Recessed installation

Shelves

Detachable starter cord

Displays or store fixtures

Center Spot Reduction technology

Cabinets

Commercial grade 3-year warranty

Soffits

Available Finishes:

Black (BL)

TrescoBook_2019.indd 60

1-800-227-1171 | trescolighting.com

6/20/19 5:14 PM

Swing

Dimensions: Actual Size

Specifications:

Front

Wattage

2.5W

Lumens

126

Efficacy (lm/W)

Input Voltage

12 VDC

Diode Life

30,000 Hours

Max Per 60W Power Supply

Max Continuous Run

Mounting

Recess/Surface

Warranty

3 Year

3-5/64” (78 mm)

Certifications

79” (2 m)

Beam Angle

100°

Photometric Data Height

Light Output

Beam Area

1ft

50.40Fc

2.4ft

3ft

5.60Fc (60.2lx)

(2.2m)

6ft

1.40Fc

14.6ft

(.3 m) (.9 m)

Side

(1.8 m)

(540.5lx)

(.7m)

7.3ft

(15lx)

(4.4m)

L-HSWING-CNI Tested

15˚ pivoting face

Color Temperature Warm White

1/2” (13 mm) Recessed Depth

2700K

Surface Mount Ring

11/16” (17.5 mm)

Warm to Neutral

3000K

4500K

Daylight

5500K

6500K

Warm (3000K) IES data verified by Underwriters Laboratory

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 61

Cool White

6/20/19 5:14 PM

3-5/64” (78 mm)

Swing

All product dimensions and specifications are subject to change without prior notice.

Required Items

LED Swing Light •

Swing

061915Part #

Description

L-HSWNG-WBL-1

LED Swing Light •

061915

12VDC 2.5W Swing, 3000K, Black

30,000 useful life hours. 2-11/16” (73 mm) hole required for recessed mounting. Surface mount ring is included with each light. Includes starter cord 79” (2 m) and AMP connector with each light.

79” (2 m)

15˙ 3-5/64” (78 mm)

1/2” (13 mm)

3-5/64” 2-11/16” (78 (68 mm)

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

2-11/16 in (68 mm)

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

1/2” 1/2” 60W 12VDC Power Supply w/6 Snap Mounting Block* (13 mm) (13 mm)

L-DC-ELT6WP-CON-1

2-11/16” 6W 12VDC Wall Mount Power Supply w/3 Snap Block* (68 mm)

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

15˙

2-11/16 in (68 mm)

15˙

1/2” (13 mm)

2-11/16” (68 mm)

2-11/16 in (68 mm)

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 62

1-800-227-1171 | trescolighting.com

6/20/19 5:14 PM

12VDC LINEAR LIGHTING

FineLine 90Â°

297 Lumens per ft. (971 per meter)

TrescoBook_2019.indd 63

6/20/19 5:14 PM

FineLine

Long and narrow, FineLine is the unobtrusive way to provide smooth, linear lighting almost anywhere. The low profile design features a frosted diffuser for even illumination and with optional manual or remote control dimmers, creating the perfect atmosphere is effortless.

Optional in-line touch dimmer available

Linkable (back-to-back or link cord)

(4-step: low-medium-high-off)

up to 12’ (3.66 m) continuous run

Straight & adjustable mounting U-Clips included

79” (2 m) starter cord included

Features:

Typical Applications:

Extremely thin, low-profile design

Shelving

90º beam spread

Displays or store fixtures

Frosted diffuser

Interior and under cabinets

Available in 3 lengths (8”, 12”, 22”) Dimmable Commercial grade 3-year warranty

Available Finishes:

Aluminum (AL)

TrescoBook_2019.indd 64

1-800-227-1171 | trescolighting.com

6/20/19 5:14 PM

FineLine Specifications:

Dimensions: Actual Size

Side

Front

Back

5/16” (8 mm)

3/8” (10 mm) 3/8” (10 mm)

Wattage

2.4W/ft (7.9 W/m)

Lumens

297 per ft. (971 per m)

Efficacy (lm/W)

124

Input Voltage

12VDC

Diode Life

50,000 Hours

Max Per 60W Power Supply

24’ (7.32 m)

Max Continuous Run

12’ (3.66 m)

Mounting

Surface/Recess

Warranty

3 Years

8” (203 mm) 12” (305 mm)

Certifications

22” (559 mm)

Beam Angle

90° Photometric Data

Height

Light Output

1ft

284Fc

3ft

31.5Fc

(339.1lx)

(1.9 m L x 1 m W)

6ft

7.88Fc

19ft L x 9.9ft W

(.3 m) (.9 m) (1.8 m)

(3056.9lx)

Beam Area 3.2ft L x 1.7ft W

(.97 m L x .52 m W)

6.3ft L x 3.3ft W

(84.8lx)

(5.7 m L x 3 m W)

L-LED-STK22-C Tested

Color Temperature Warm White

End

2700K

Warm to Neutral

3000K

(3000K)

5/16” (8 mm) 3/8” (10 mm)

Cool White

4500K

Daylight

5500K

6500K

(5000K)

IES data verified by Underwriters Laboratory.

3/8” (10 mm)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 65

6/20/19 5:14 PM

3/8 in. (10 mm)

8 in. (203 mm) 12 in. (305 mm) 22 in. (559 mm)

FineLine

3/8 in. (10 mm)

10 mm (3/8 in.)

All product dimensions and specifications are subject to change without prior notice.

79 in. (2 m)

Required Items

3/8 in. (10mm) 3/8 in. (10 mm)

8 in. (203 mm) 12 in. (305 mm) 22 in. (559 mm) 3/8 in. (10 mm)

79 in. (2 m)

12VDC

COMPONEN TS

Power Supplie s

For details see Power Supplies on Page 141. 5/16 in. (8 mm)

3/8 in. (10 mm)

79 in. (2 m)

Optional Items FineLine Touch Dimmer 1/4 in. (6 mm)

2-1/8 in. (54 mm)

5/16 in. (8 mm) 3/8 in. (10 mm)

22” (559 mm) Fineline, 3000K, Nickel

L-LED-STK8-CNI-1

8” (203 mm) Fineline, 5000K, Nickel

L-LED-STK12-CNI-1

12” (305 mm) Fineline, 5000K, Nickel

L-LED-STK22-CNI-1

22” (559 mm) Fineline, 5000K, Nickel

74 mm 2-7/8 in.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1 L-DC-ELT6WP-CON-1

10 mm 60W 12VDC Power Supply w/6 Snap (3/8 Mounting Block* in.)

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

5/16 in. (8 mm)

1 in. 2 in. (5 cm) (25 mm) 6 in. (15 cm) 10 in. (25 cm.) 24 in (60 cm) 48 in. (120 cm) 72 in. (180 cm)

Adjustable U-Clip Packs

74 mm 2-7/8 in.

Part #

Description

L-LED-STKDIM-TD4-1

Inline Touch Dimmer, 4 Step

Max Load 27W. Controls up to 11 ft. (3.3 m) of FineLine lights.

3/8 in. (10 mm)

1-3/4 in. (44 mm)

FineLine Link Cord

12” (305 mm) Fineline, 3000K, Nickel

L-LED-STK22-WNI-1

Maximum continuous run of 12 ft. (3.7 m) to prevent voltage drop. Maximum 24 ft. (7.3 m) per 60W power supply. 79” (2 m) Starter Cord, AMP® Connector and mounting U-Clips are included with each light.

Power Supplies

3/8 in. (10 mm)

L-LED-STK12-WNI-1

Description

10 mm (3/8 in.)

5/16 in. (8 mm)

8 in. (203 mm) 12 in. (305 mm) 22 in. (559 mm)

L-LED-STK8-WNI-1

10 mm 8” (203 mm) Fineline, 3000K, Nickel(3/8 in.)

Part #

FineLine LED Series

74 mm 2-7/8 in.

Part #

Description

L-LED-STKLNK-5-1

2” (5 cm) 12VDC Stick Linking Cord

L-LED-STKLNK-15-1

6” (15 cm) 12VDC Stick Linking Cord

L-LED-STKLNK-25-1

10” (25 cm) 12V DC Stick Linking Cord

L-LED-STKLNK-60-1

24” (60 cm) 12V DC Stick Linking Cord

L-LED-STKLNK-120-1

48” (120 cm) 12V DC Stick Linking Cord

L-LED-STKLNK-180-1

72” (180 cm) 12VDC Stick Linking Cord

Part #

Description

L-STKAUCLP-NI-1

FineLine Adj U-Clip Pack, NI

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 66

1-800-227-1171 | trescolighting.com

6/20/19 5:15 PM

12VDC LINEAR LIGHTING

SimpLED 120Â°

214 Lumens per ft.

(702 per meter)

TrescoBook_2019.indd 67

6/20/19 5:15 PM

SimpLED

The patented SimpLED features the unique “three-in-one” system of diffuser options, giving you power to determine glare reflection and intensity. Optional touch, motion or photo/light control modules can be installed in-line or remotely mounted via link cord to further expand your lighting capabilities. US PATENT NO: 8,545,045

79” (2 m) starter cord and H-Shaped back-to-back connector included

Linkable (back-to-back or link cord) up to 10’ (3 m) continuous run

Clear

Milk/Opal

Frosted

3 diffuser options (included)

Straight & adjustable mounting U-Clips and magnets included

Features:

Typical Applications:

Available in 3 lengths (8”, 12”, 22”)

Showcases

Clean, flat low-profile aluminum finish

Displays or store fixtures

Wide 120º beam spread

Task lighting

Magnets attached to bottom of fixture for metal shelf

Metal shelving

mounting

Office furniture

Optional series of in-line controllers available

Under cabinet

4 mounting options: screw, magnetic, straight & adjustable mounting U-Clips Dimmable

Available Finishes:

Commercial grade 3-year warranty Aluminum (AL)

TrescoBook_2019.indd 68

1-800-227-1171 | trescolighting.com

6/20/19 5:16 PM

SimpLED Specifications:

Dimensions: Actual Size

Front

Side

3/4” (19 mm)

3/8” (10 mm)

Back

Wattage

4.5W/ft (14.8 W/m)

Lumens

214 per ft. (702 per m)

Efficacy (lm/W)

47.5

Input Voltage

12VDC

Diode Life

8” (203 mm) 12” (305 mm)

50,000 Hours

Max Per 60W Power Supply

13’ (3.96 m)

Max Continuous Run

10’ (3.04 m)

Mounting

Surface

Warranty

3 Year

Certifications

22” (559 mm)

Beam Angle

120° Photometric Data

Height

Light Output

1ft

86.4Fc

3ft

9.6Fc

(103.3lx)

(2 m L x 2.7 m W)

6ft

2.40Fc

13.1ft L x 17.6ft W

(.3 m) (.9 m) (1.8 m)

Beam Area 2.2ft L x 2.9ft W

(.67 m L x .88 m W)

(930lx)

6.6ft L x 8.8ft W

(25.8lx)

(4 m L x 5.4 m W)

L-LED-SMP12-C Tested

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

Warm (3000K)

IES data verified by Intertek testing lab. 7/16” (11 mm)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 69

6/20/19 5:16 PM

SimpLED

All product dimensions and specifications are subject to change without prior notice.

Required Items SimpLED Series

79” (2 m)

3/8” (10 mm)

7/16” (11 mm)

8” (203 mm) 12” (305 mm) 22” (559 mm)

3/4” (19 mm)

Part #

Description

L-LED-SMP8-WNI-1

8” (203 mm) High Output LED Strip, 3000K, Nickel,

L-LED-SMP12-WNI-1

12” (305 mm) High Output LED Strip, 3000K, Nickel

L-LED-SMP22-WNI-1

22” (559 mm) High Output LED Strip, 3000K, Nickel

L-LED-SMP8-CNI-1

8” (203 mm) High Output LED Strip, 5000K, Nickel,

L-LED-SMP12-CNI-1

12” (305 mm) High Output LED Strip, 5000K, Nickel

L-LED-SMP22-CNI-1

22” (559 mm) High Output LED Strip, 5000K, Nickel

50,000 useful life hours. Maximum continuous run 10 ft. (3 m) to prevent voltage drop. Maximum 13 ft. (3.7 m) per 60W power supply. 79” (2 m) Starter Cord, AMP® Connector, H-Shaped Connector, and mounting U-Clips are included with each light. 3 diffusers (Clear, Frosted and Milk/Opal) are included with each light.

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

Optional Items SimpLED Link Cord

Part #

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.) 5/16” (11 mm)

5/16” (11 mm)

2” (5 cm) 6” (15 cm) 10” (25 cm) 24” (60 cm) 48” (120 cm) 72” (180 cm)

3/8” SimpLED Control Modules (10 mm)

Photo

2-3/4” (70 mm)

L-LED-SMPLNK-5-1

2” (5 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-15-1

6” (15 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-25-1

10” (25 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-60-1

24” (60 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-120-1

48” (120 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-180-1

72” (180 cm) 12VDC SimpLED Linking Cord

Part #

Description

L-LED-SMPPHOTO-1

27W Rectangle Inline Photo Sensor

L-LED-SMPTD4-1

27W Rectangle Inline Touch Dimmer

L-LED-SMPMOT-1

27W Rectangle Inline Motion Sensor

Controls up to 6 ft. (1.8 m) of SimpLED lights.

Touch

Motion

2 m (79 in.)Description

3/4” (19 mm)

Max load 27W.

4-1/8” (105 mm) 3/8” (10 mm)

Photo

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

2-3/4” (70 mm)

Touch

70 Motion

3/4” (19 mm)

1-800-227-1171 | trescolighting.com

4-1/8” (105 mm)

TrescoBook_2019.indd 70

6/20/19 5:16 PM

12VDC LINEAR LIGHTING

SimpLED 2.0 110Â°

470 Lumens per ft. (1168 per meter)

TrescoBook_2019.indd 71

6/20/19 5:16 PM

SimpLED 2.0

The SimpLED 2.0 sets the bar for light output and simplicity. The patented push-in “H” connection system and inline control modules, you get the simplest and quickest installation possible. Choose either straight or pivoting mounting clips, then snap the fixtures into place to let over 350 lumens per foot illuminate your project. US PATENT NO: 8,545,045

Straight & adjustable mounting

Luniform technology provide superior light output and a uniform light spread without any “dots”

Clear

U-Clips and magnets included

Milk/Opal

Frosted

Three diffuser options packaged with each light

Typical Applications:

Features:

Showcases

Integrated magnets for mounting to metal

Displays or store fixtures

Clean, low-profile aluminum finish

Task lighting

Available in 3 lengths (8”, 12”, 22”) Optional series of in-line controllers available Dimmable Commercial grade 3-year warranty

Metal shelving Office furniture Under cabinet

Available Finishes:

Aluminum (AL)

TrescoBook_2019.indd 72

1-800-227-1171 | trescolighting.com

6/20/19 5:17 PM

SimpLED 2.0

Specifications:

Dimensions: Actual Size

Front

Side

3/4” (19 mm)

3/8” (10 mm)

Back

Wattage

5W per ft. (16.4W/m)

Lumens

470 per ft. (1541 per m)

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

8” (203 mm) 12” (305 mm) 22” (559 mm)

50,000 Hours

Max Per 60W Power Supply

12’ (3.7 m)

Max Continuous Run

10’ (3 m)

Mounting

Surface

Warranty

3 Year

Certifications

Beam Angle

110° Photometric Data

Height

Light Output

1ft

244.70Fc

3ft

27.19Fc (292.7lx)

(2.5 m L x 2.5 m W)

6ft

6.80Fc

16.4ft L x 16.5ft W

(.3 m) (.9 m) (1.8 m)

(2634lx)

Beam Area 2.7ft L x 2.8ft W

(.82 m L x .85 m W)

8.2ft L x 8.3ft W

(73.2lx)

(5 m L x 5 m W)

L-SMPHO22-C Tested

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

Warm (3000K)

IES data verified by Intertek testing lab. 7/16” (11 mm)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 73

6/20/19 5:17 PM

SimpLED 2.0

All product dimensions and specifications are subject to change without prior notice.

Required Items SimpLED 2.0 Series

79” (2 m)

3/8” (10 mm)

7/16” (11 mm)

8” (203 mm) 12” (305 mm) 22” (559 mm)

3/4” (19 mm)

Part #

Description

L-SMPHO8-WNI-1

8" (203 mm) 12V SimpLED 2.0, 3000K Nickel

L-SMPHO12-WNI-1

12" (305 mm) 12V SimpLED 2.0, 3000K Nickel

L-SMPHO22-WNI-1

22" (559 mm) 12V SimpLED 2.0, 3000K Nickel

L-SMPHO8-CNI-1

8" (203 mm) 12V SimpLED 2.0, 5000K Nickel

L-SMPHO12-CNI-1

12" (305 mm) 12V SimpLED 2.0, 5000K Nickel

L-SMPHO22-CNI-1

22" (559 mm) 12V SimpLED 2.0, 5000K Nickel

50,000 useful life hours. Maximum continuous run 10 ft. (3 m) to prevent voltage drop. Maximum 12 ft. (3.6 m) per power supply. 79” (2 m) Starter Cord, AMP® Connector, H-Shaped Connector, and Mounting U-Clips are included with each light. 3 diffusers (Clear, Frosted and Milk/Opal) are included with each light.

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

Optional Items Part #

SimpLED Link Cord

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.) 5/16” (11 mm)

5/16” (11 mm)

2” (5 cm) 6” (15 cm) 10” (25 cm) 24” (60 cm) 48” (120 cm) 72” (180 cm)

2 m (79 in.)Description

L-LED-SMPLNK-5-1

2” (5 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-15-1

6” (15 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-25-1

10” (25 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-60-1

24” (60 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-120-1

48” (120 cm) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-180-1

72” (180 cm) 12VDC SimpLED Linking Cord

Part #

Description

L-LED-SMPPHOTO-1

27W Rectangle Inline Photo Sensor

L-LED-SMPTD4-1

27W Rectangle Inline Touch Dimmer

L-LED-SMPMOT-1

27W Rectangle Inline Motion Sensor

3/8” SimpLED Control Modules (10 mm)

Photo

2-3/4” (70 mm)

Touch

Motion

3/4” (19 mm)

4-1/8” (105 mm)

Controls up to 5.5 ft. (1.6 m) of SimpLED 2.0 lights. Max load 27W.

3/8” (10 mm)

Photo

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

2-3/4” (70 mm)

Touch

74 Motion

3/4” (19 mm)

1-800-227-1171 | trescolighting.com

4-1/8” (105 mm)

TrescoBook_2019.indd 74

6/20/19 5:17 PM

12VDC LINEAR LIGHTING

Elli Series ®

120°

200 Lumens per ft. (654 per meter)

TrescoBook_2019.indd 75

6/20/19 5:17 PM

Elli® Series The patented Elli® Series is available in six lengths and features a square or an angled design that fits easily over glue or staples commonly found in cabinet and casework construction. High-output, wide-angle LEDs and fixture-to-fixture linking capability make for perfect, even illumination. US PATENT NO: D577,857 & D574,107

Elli® V’s patented angled design

Linkable up to 12’ (3.6 m) continuous run

allows for tight corner mounting

U-Clips included with Elli® 2

Elli® 2’s square design is easy to install & conceal

Features:

Typical Applications:

Wide 120º beam spread

Showcases

Instant on, instant brightness!

Jewelry cases

Sleek & durable aluminum design

Task lighting

Dimmable

Store fixtures

Commercial grade 3-year warranty

Shelf lighting Interior cabinet

Available Finishes:

Aluminum (AL)

TrescoBook_2019.indd 76

1-800-227-1171 | trescolighting.com

6/20/19 5:17 PM

Elli® Series

Specifications:

Dimensions: Actual Size

Elli® 2

Front

Side

Wattage

3.6W/ft (11.8W/m)

Lumens

200 per ft. (654 per m)

Efficacy (lm/W)

55.4

Input Voltage 2” (50 mm)

12VDC

Diode Life

7/16” (11 mm)

11” (279 mm) 17” (432 mm) 23” (584 mm) 29” (737 mm) 35” (889 mm) 41” (1041 mm)

50,000 Hours

Max Per 60W Power Supply

16’ (4.88 m)

Max Continuous Run

12’ (3.66 m)

Mounting

Surface

Warranty

3 Years

Certifications

End 7/16” (11 mm)

Beam Angle

7/16” (11 mm)

120°

Elli® V Front

Side

1-1/16” (27 mm)

3/8” (10 mm)

Photometric Data

Height

Light Output

Beam Area

1ft

282.60Fc

3ft L x 3ft W

3ft

31.40Fc (338lx)

(2.7 m L x 2.7 m W)

6ft

7.85Fc

18ft L x 18.1ft W

(.3 m) (.9 m) (1.8 m)

(3041.9lx)

(84.5lx)

(.9 m L x .9 m W)

9ft L x 9ft W

(5.5 m L x 5.5 m W) L-LED-SQPR-1016C Tested

Color Temperature

11” (279 mm) 17” (432 mm)

Warm White

Warm to Neutral

Cool White

Daylight

End

23” (584 mm)

1/2” (13 mm)

29” (737 mm) 35” (889 mm)

3/8” (6 mm)

41” (1041 mm)

2700K

3000K

4500K

Warm (3500K)

5500K

6500K

Cool (4800K)

IES data verified by Intertek testing lab. 3/8” 1/4” (10 mm) (6 mm)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 77

6/20/19 5:17 PM

22 mm (10 in.) 22 mm (16 in.) 22 mm (22 in.) 22 mm (28 in.) 22 mm (34 in.) 22 mm (40 in.)

1-1/16”

Elli® Series (27 mm)

1-1/16” (27 mm)

5/8” (16 mm)

Required Items

5/8” (16 mm)

Elli V Series ®

1/2” (13 mm) 3/8” (10 mm)

54°

1-1/16” (27 mm)

5/8” (16 mm)

L-LED-AGLPR-250WAL-1

11” (279 mm) Elli® V LED,3500K, Aluminum

L-LED-AGLPR-406WAL-1

17” (432 mm) Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-559WAL-1

23” (584 mm) Elli® V LED, 3500K, Aluminum

22 mm (10 in.) 22 mm (16 in.) 22 mm (22 in.) 22 mm (28 in.) 22 mm (34 in.) 22 mm (40 in.)

L-LED-AGLPR-711WAL-1

29” (737 mm) Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-864WAL-1 15 mm

35” (889 mm) Elli® V LED, 3500K, Aluminum 41” (1041 mm) Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-250CAL-1

11” (279 mm) Elli® V LED, 4800K, Aluminum

L-LED-AGLPR-406CAL-1

17” (432 mm) Elli® V LED, 4800K, Aluminum

L-LED-AGLPR-711CAL-1

29” (737 mm) Elli® V LED, 4800K, Aluminum

L-LED-AGLPR-1016CAL-1

41” (1041 mm) Elli® V LED, 4800K, Aluminum

50,000 useful life hours. Maximum continuous run 12 ft. (3.65 m) to prevent voltage drop. 16 ft. (4.88 m) maximum per power supply.

3/8” (10 mm)

15 mm 5/8 in.

54°

1/4” 3/8” (6 mm) (10 mm)

4” (102 mm)

7/16” (11 mm) 7/16” (11 mm) 4” (102 mm)

Part #

Description

L-LED-SQPR-250WAL-1

11” (279 mm) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-406WAL-1

17” (432 mm) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-559WAL-1

23” (584 mm) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-711WAL-1

29” (737 mm) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-864WAL-1

35” (889 mm) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-1016WAL-1

41” (1041 mm) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-250CAL-1

11” (279 mm) Elli® 2 LED, 4800K, Aluminum

L-LED-SQPR-559CAL-1

23” (584 mm) Elli® 2 LED, 4800K, Aluminum

L-LED-SQPR-864CAL-1

35” (889 mm) Elli® 2 LED, 4800K, Aluminum

L-LED-SQPR-1016CAL-1

41” (1041 mm) Elli® 2 LED, 4800K, Aluminum

50,000 useful life hours. Maximum continuous run 12 ft. (3.65 m) to prevent voltage drop. 16 ft. (4.88 m) maximum per power supply.

COMPON ENTS

Power Supplie s

4” (102 mm)

12VDC

Power Supplies

66. LED -Link Cord D

Description

15 mm L-LED-AGLPR-1016WAL-1 5/8 in.

1/2” 4”(13 mm) (102 mm)

Elli 2 Series

All product dimensions and specifications are subject to change without prior notice.

Part #

5/8 in.

54°

1/4” 3/8” (6 mm) (10 mm) 1/4” 3/8” (6 mm) (10 mm)

4” (102 mm)

22 mm (10 in.) 22 mm (16 in.) 22 mm (22 in.) 22 mm (28 in.) 22 mm (34 in.) 22 mm (40 in.)

01-14-10

For details see Power Supplies on Page 141. Elli® Series works with all Tresco 12VDC power supplies.

1/2” 13 mm

Starter Cord / Link Cord

Hole size:

1/2” (13 mm)

Part #

Description

L-LED-LINKD-8-1

3” (8 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-15-1

6” (15 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-25-1

10” (25 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-60-1

24” (60 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-120-1

48” (120 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-180-1

72” (180 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-245-1

96” (245 cm) 12VDC Starter/Link/Extension Cord

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 78

1-800-227-1171 | trescolighting.com

6/20/19 5:17 PM

12VDC LINEAR LIGHTING

Eurolinx 120Â°

216 Lumens per ft. (708 per meter)

TrescoBook_2019.indd 79

6/20/19 5:17 PM

Eurolinx

The Eurolinx’s flat profile blends in with any application. Using specialized diffuser and reflector technology to achieve Luniform output, this European style light is a perfect choice for all contemporary and high-end commercial applications. Use the magnets within the U-Clips for metal shelving or office furniture mounting. At 4W per foot and over 200 lumens, Eurolinx is a top pick for high illumination.

Optional inline gradual dimmer

Linkable (back-to-back or link cord) up to 10’ (3 m) continuous run

Mounting clips included. Mounting clips with integrated

Sleek, contemporary European design

magnets sold separately

Features:

Typical Applications:

Two beam spreads based on orientation

Cabinets or shelving

Dimmable

Countertops

Luniform Technology – no visible diodes on surface of fixture

Showcases

Available in 5 lengths

Two Beam Spreads:

Commercial grade 3-year warranty

Powered Right Side

Powered Left Side Small groove facing you.

Small groove facing wall.

Wall

Available Finishes:

Aluminum (AL)

TrescoBook_2019.indd 80

1-800-227-1171 | trescolighting.com

6/20/19 5:18 PM

Eurolinx

Specifications:

Dimensions: Actual Size

Front 5/16” (8 mm)

1-3/16” (30 mm)

Wattage

4W/ft. (13.1 W/m)

Lumens

216 per ft. (708 per m)

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

7-3/4” (197 mm) 10-3/4” (273 mm) 19-3/4” (502 mm) 31-3/4” (806 mm) 43-3/4” (1111 mm)

30,000 Hours

Max Per 60W Power Supply

15’ (4.6 m)

Max Continuous Run

10’ (3 m)

Mounting

Surface

Warranty

3 Year

Certifications

Beam Angle

120° Photometric Data

Height

Light Output

1ft

266.60Fc

3ft

29.62Fc (318.8lx)

(2.7 m L x 3 m W)

6ft

7.40Fc

17.6ft L x 20ft W

(.3 m) (.9 m) (1.8 m)

Beam Area 2.9ft L x 3.3ft W

(.88 m L x 1 m W)

(2870lx)

8.8ft L x 10ft W

(79.6lx)

(5.4 m L x 6 m W)

L-EUL15W-1111C Tested

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

Warm (3000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 81

6/20/19 5:18 PM

Eurolinx LED Lights • L -EUL

082114

Eurolinx

All product dimensions and specifications are subject to change without prior notice.

1-3/16" (30 mm)

7-3/4" (197 mm) 10-3/4 (273 mm) 19-3/4" (502 mm) 31-3/4" (806 mm) 43-3/4" (1111 mm)

1-19/64" (33 mm)

Required Items

Eurolinx LED Lights • L -EUL

Eurolinx Series 1-3/16" (30 mm)

082114

7-3/4" (197 mm) 10-3/4 (273 mm) 19-3/4" (502 mm) 31-3/4" (806 mm) 43-3/4" (1111 mm)

1-19/64" (33 mm)

5/16" (8mm)

1-3/16" (30mm)

Part #

Description

L-EUL3W-197WAL-1

7.75” (197 mm) 12VDC 3W Eurolinx 3000K

L-EUL4W-273WAL-1

10.75” (273 mm) 12VDC 4W Eurolinx 3000K

L-EUL7W-502WAL-1

19.75” (502 mm) 12VDC 7W Eurolinx 3000K

L-EUL11W-806WAL-1

31.75” (806 mm) 12VDC 11W Eurolinx 3000K

L-EUL15W-1111WAL-1

43.75” (1111 mm) 12VDC 15W Eurolinx 3000K

L-EUL3W-197CAL-1

7.75” (197 mm) 12VDC 3W Eurolinx 5000K

L-EUL4W-273CAL-1

10.75” (273 mm) 12VDC 4W Eurolinx 5000K

L-EUL7W-502CAL-1

19.75” (502 mm) 12VDC 7W Eurolinx 5000K

L-EUL11W-806CAL-1

31.75” (806 mm) 12VDC 11W Eurolinx 5000K

L-EUL15W-1111CAL-1

43.75” (1111 mm) 12VDC 15W Eurolinx 5000K

30,000 useful life hours Maximum continuous run 10 ft. (3 m) to prevent voltage drop. Maximum 15 ft. (4.6 m) per 60W power supply. Each light includes 79” (2 m) cord, U-Clips, back to back connector. 5/16" (8mm) COMPON ENTS

12VDC

Power Supplies

Power Supplie s

1-3/16" (30mm)

Eurolinx Link Cord • L -EULNK

082114

For details see Power Supplies on Page 141.

Eurolinx works with all Tresco 12VDC power supplies. 1-19/64" (33 mm)

Optional Items Eurolinx Link Cord • L -EULNK

082114

Euro Link Cord

Eurolinx Inline Dimmer Module •

1-19/64" (33 mm)

2" (5 cm) 6" (15 cm) 10" (25 cm) 24" (60 cm) (120 cm) Part 082814 # 48" L -EUL -GTD 72" (180 cm)

1-19/64" (33 mm)

2" (5 cm) 6" (15 cm) 1-3/16" 10" (25 cm) 24" (60 cm) (30mm) 48" (120 cm) Eurolinx 72" (180 cm) Mounting U Clips

1-3/8" (35mm)

1-19/64" (33 mm)

082814

Description

L-EULNK-15-WH-1

6” (15 cm) Eurolinx linking cord, white

L-EULNK-25-WH-1

10” (25 cm) Eurolinx linking cord, white

L-EULNK-60-WH-1

24” (60 cm) Eurolinx linking cord, white

L-EULNK-120-WH-1

48” (120 cm) Eurolinx linking cord, white

L-EULNK-180-WH-1

72” (180 cm) Eurolinx linking cord, white

5/16" (8mm)

1-3/16" (30mm) Eurolinx Inline Dimmer Module • L -EUL -GTD

082814

Eurolinx Touch Dimmer 1-3/16" (30mm)

5/16" (8mm)

1-3/8" (35mm)

Eurolinx U-Clips

5/16" (8mm) 1-3/16" (30mm)

1-3/16" (30mm)

7/16" (11mm)

Part #

Description

L-EUL-GTD-1

27W Eurolinx gradual inline touch dimmer

Controls up to 6 feet (1.8 m) of Eurolinx Lights. Max load 27W.

Part #

Description

L-EUL-UCLP-1

Eurolinx U-Clip with integrated magnets pack (2-clips)

1-3/16" (30mm)

Eurolinx Back-to-Back Link • L -EULNK-BTB 5/16" (8mm)

Eurolinx Back-to-Back Link 1-3/16" (30mm)

1-3/16" (30mm)

1-1/8" (29mm)

082114

Part #

Description

L-EULNK-BTB-GY-1

Eurolinx Back-to-Back Link, Gray

Included with each light.

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 82

5/16" (8mm)

6/20/19 5:18 PM

12VDC FLEXIBLE LIGHTING

FlexTape

Â®

TrescoBook_2019.indd 83

6/20/19 5:18 PM

FlexTape

A unique design makes FlexTapeÂŽ the most versatile LED light on earth. Curve them under frosted glass to create a stunning display or run them under shelving for continuous illumination. The tape features an adhesive backing for easy peel-and-stick installation.

Easy-to-use connectors (no soldering!) Tight reliable connections

Strong 300 LSE 3MTM adhesive backing

Sold by the roll

Features:

Typical Applications:

Avg. rated life: 50,000 hours*

Store fixtures

White color printed board maximizes light output

Edge lighting

Lower heat, longer life than competing brands

Back lighting

Available in multiple color temperatures and colors

Accent lighting

Dimmable

Cove lighting

Commercial grade 3-year warranty

Toe kick

*When adhered to a metal substrate

TrescoBook_2019.indd 84

Soffit

1-800-227-1171 | trescolighting.com

6/20/19 5:18 PM

FlexTape® 1.5W

Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

1.5W/ft. (4.9W/m)

Lumens

91 per ft. (298 per m)

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

50,000 Hours

Max Per 60W Power Supply

40’ (12 m)

Max Continuous Run

20’ (6 m)

Mounting

Surface

Warranty

3 Year

Certifications

Beam Angle

110°

Cuttable every 2” (50 mm)

Photometric Data

Height

Light Output

1ft

32.70Fc

3ft

3.63Fc (39.1lx)

(2.7 m L x 2.6 m W)

6ft

.91Fc

17.7ft L x 17.1ft W

(.3 m) (.9 m) (1.8 m)

(352lx)

Beam Area 3ft L x 2.8ft W

(.9 m L x .85 m W)

8.9ft L x 8.5ft W

(9.8lx)

(5.4 m L x 5.2 m W)

L-LED-FLXTPE-C Tested

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 11/16” (16 mm)

1/8” (3 mm)

2700K

3/32” (2.3 mm)

Warm (2700K)

3000K

4500K

Neutral (3500K)

5500K

Cool (4800K)

6500K

Daylight (6500K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 85

6/20/19 5:18 PM

FlexTape® 3W

Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

3W/ft. (9.8 W/m)

Lumens

149 per ft. (489 per m)

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

50,000 Hours

Max Per 60W Power Supply

20’ (6 m)

Max Continuous Run

16.4’ (5 m)

Mounting

Surface

Warranty

3 Year

Certifications Cuttable every 1”(25 mm)

Beam Angle

120° Photometric Data

Height

Light Output

1ft

52.30Fc

3ft

5.81Fc (62.5lx)

(2.8 m L x 2.8 m W)

6ft

1.45Fc

18.5ft L x 18.4ft W

(.3 m) (.9 m) (1.8 m)

(563lx)

Beam Area 3.1ft L x 3.1ft W

(.94 m L x .94 m W)

9.2ft L x 9.2ft W

(15.6lx)

(5.6 m L x 5.6 m W)

LED-FLXTPE-CHO Tested

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 5/16” (7 mm)

2700K

1/8” (3 mm) 3/32” (2.3 mm)

Warm (2700K)

3000K

4500K

Neutral (3500K)

5500K

Cool (4800K)

6500K

Daylight (6500K)

IES data verified by Intertek testing lab.

TrescoBook_2019.indd 86

1-800-227-1171 | trescolighting.com

6/20/19 5:18 PM

FlexTape® 4.4W

Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

4.4W/ft. (14.4 W/m)

Lumens

338 per ft. (1109 per m)

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

50,000 Hours

Max Per 60W Power Supply

13’ (3.96 m)

Max Continuous Run

13’ (3.96 m)

Mounting

Surface

Warranty

3 Year

Certifications Cuttable every 2”(50 mm)

Beam Angle

120° Photometric Data

Height

Light Output

1ft

119.70Fc

3ft

13.30Fc (143.2lx)

(2.7 m L x 2.7 m W)

6ft

3.30Fc

17.4ft L x 17.7ft W

(.3 m) (.9 m) (1.8 m)

(1288.4lx)

(35.5lx)

Beam Area 2.9ft L x 2.9ft W

(.88 m L x .88 m W)

8.7ft L x 8.8ft W

(5.3 m L x 5.4 m W)

L-FLXTPE-48CRV-1 Tested

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 11/16” (17 mm)

2700K

3/16” (5 mm) 3/32” (2.3 mm)

Warm (2700K)

3000K

4500K

Neutral (3500K)

5500K

Cool (4800K)

6500K

Daylight (6500K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 87

6/20/19 5:18 PM

FlexTape® 5.5W - Only to be used with Infinex

Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

5.5W/ft. (18W/m)

Lumens

615 per ft. (2017 per m)

Efficacy (lm/W)

112

Input Voltage

12VDC

Diode Life

Cuttable every 1-1/2” (38 mm)

50,000 Hours

Max Per 60W Power Supply

10’ (3 m)

Max Continuous Run

10’ (3 m)

Mounting

Surface

Warranty

3 Year*

Certifications

Beam Angle

115° Photometric Data

Height

Light Output

1ft

205Fc

3ft

22.8Fc (245lx)

(3 m L x 2.8 m W)

6ft

5.69Fc

19.9ft L x 18.6ft W

(.3 m) (.9 m) (1.8 m)

Beam Area 3.3ft L x 3.1ft W

(1 m L x .94 m W)

(2207lx)

10ft L x 9.3ft W

(61.3lx)

(6 m L x 5.6 m W)

L-FLXTPE-48RU-1 Tested

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 1/2” (12 mm)

2700K

7/64” (2.8 mm) 3/64” (1.2 mm)

Warm (2700K)

3000K

4500K

Neutral (3500K)

5500K

Cool (4800K)

6500K

Daylight (6500K)

*MUST USE PROPER HEAT SINK (i.e. Infinex Aluminum Extrusions) IES data verified by Intertek testing lab.

TrescoBook_2019.indd 88

1-800-227-1171 | trescolighting.com

6/20/19 5:19 PM

1/16 in. 3 mm 1/8 in.

17 mm 11/16 in.

Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

10 mm 3/8 in.

5 mm 3/16 in.

FlexTape

10 mm Spool of LED FlexTape All product dimensions and specifications are subject to change without prior notice. 3/8 in. 6 m (20 ft.)

Required Items FlexTape® 1.5W 1/8 in. 3 mm

Hexhead Connector

1/8” 3 mm

1-1/2 mm 1/16 in.

Amp® 3 mm 1/8Connector in.

17 mm 11/16 in.

11/16” 16 mm

1-1/2 mm 1/16 in.

1/8” 3 mm

5 mm 3/16 in.

3/32” 2.3 mm

Jumper Cord 127 mm 5 in.

2.3 mm

1/8” 3 mm Hexhead Connector

11/16” 16 mm

1-1/2 mm 1/16 in. 3 mm 1/8 in.

1/8” mm 3 mm1-1/2 1/16 in.

17 mm 11/16 in. Amp® Connector

L-LED-FLXTPE-CROLL-1

20’ (6 m) 12VDC 4800K FlexTape® Roll

11/16 in. 1/16 in. 17 mm L-LED-FLXTPE-DROLL-1 1-1/2 mm

20’ (6 m) 12VDC Red FlexTape® Roll

L-LED-FLXTPE-BROLL-1

20’ (6 m) 12VDC Blue FlexTape® Roll

3/8” 10 mm

Starter Cord 2m 79 in.

Cord 127 mm (5 in.)

10 mm

3/16” 3/8 in. 5 mm

11/16” 17 mm

Mounting Block

16.4’ (5 m) 12VDC 4800K High Output FlexTape® Roll

L-LED-FLXTPE-DRHO-1

16.4’ (5 m) 12VDC 6500K High Output FlexTape® Roll

3/8” 10 mm

1” 10 mm 25in. mm 3/8 Power Cord 2 m (79 in.)

FlexTape 4.4W ®

Amp® Connector 1/16 in. 1-1/2 mm

Cord 79 in. 2m

11/16” 16 mm

3/32” 2.3 mm

1/8 in. 3 mm

16.4’ (5 m) 12VDC Blue High Output FlexTape® Roll Maximum continuous run is 16.4’ (5 m). Maximum per power supply is 20’ (6 m). Mounts with adhesive backing. Cuttable every 1” (25 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion. Power Cord 2 m (79 in.)

Cord 5 in. (127 mm)

Description

11/16 in. L-FLXTPE-WRV-1 17 mm

L-FLXTPE-NRV-1

1/16 in. 1-1/2 mm

L-FLXTPE-CRV-1

Hexhead Connector 3/32” 2.3 mm

5/16” 7 mm

Spool of LED FlexTape

Jumper Cord

Part #

1/8” 3 Starter mm

3/8 in. 10 mm

16.4’ (5 m) 12VDC Red High Output FlexTape® Roll 20 ft. (6m)

Spool of LED FlexTape 6 m (20 ft.)

3/32” 2.3 mm

Required Items

1/8” 3 mm

DC-ELT60-CON Transformer

16.4’ (5 m) 12VDC 2700K High Output FlexTape® Roll

L-LED-FLXTPE-CRHO-1

Cord 127 mm (5 in.)

5 mm 3/16 in.

Description

16.4’ (5 m) 12VDC 3500K High Output FlexTape® Roll

L-LED-FLXTPE-BRHO-1

Jumper Cord 127 mm

Maximum continuous run is 20’ (6 m). Maximum per power supply is 40’ (12 m). Spool of LED FlexTape Mounts with adhesive backing. Cuttable every 2” (50 mm). 20 Toft. be(6m) used on clean, Jumper Cord smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

L-LED-FLXTPE-NRHO-1

3/8” 10 mm L-LED-FLXTPE-RRHO-1

3/32” 2.3 mm

3/8 in. 10 mm

20’ (6 m) 12VDC 6500K FlexTape® Roll

L-LED-FLXTPE-RROLL-1

2” 49 mm

in. Hexhead5Connector 3/32” 2.3 mm

5/16” 7 mm

20’ (6 m) 12VDC 3500K FlexTape® Roll

1/16 in. 1-1/2 mm L-LED-FLXTPE-WRHO-1

3/32” 2.3 mm

Jumper Cord

1/16 in. 1-1/2L-LED-FLXTPE-NROLL-1 mm

1” FlexTape Spool of LED

FlexTape 3W

11/16” 17 mm

20’ (6 m) 12VDC 2700K FlexTape® Roll

m (20 25 ft.)mm 1/86in. Part # 11/16 in. 3 mm 17 mm

3/16” 5 mm

L-LED-FLXTPE-WROLL-1

1/16 in. 1-1/2 mm

DC-ELT60-CON 3/32” Transformer

10 mm Mounting Block 3/8 in.

Description

Power Cord 102”mm 2 m (79 in.) 49 3/8mm in.

Cord 127 mm (5 in.)

5/16” Cord 127 mm 7 mm (5 in.)

Part #

13’ (4 m) 12VDCCord 2700K High Output FlexTape® Roll

DC-ELT60-CON ® 13’ (4 m) 12VDC 3500K High Output FlexTape Roll Transformer Mounting Block 5 in. (127 mm)

3/8 in. 10 mm

13’ (4 m) 12VDC 4800K High Output FlexTape® Roll

L-FLXTPE-DRV-1

13’ (4 m) 12VDC 6500K High Output FlexTape® Roll

Hexhead Connector 1-1/2 mm 1/16 in. 3 mm 1/8 in.

3/16” 5 mm 17 mm

Amp® Connector 11/16 in.

1-1/2 mm 1/16 in.

2” 49 mm

Jumper Cord 127 mm 5 in.

11/16” 17 mm

Amp® Connector

Power Cord 10 mm 2 m (79 in.) 3/8 in.

3/32” 2.3 mm

Cord 127 mm (5 in.)

Starter Cord 2m 79 in.

5 mm 3/16 in.

Mounting Block Starter Cord 10 mm 3/8 in. 79 ®in. FlexTape 5.5W 2m

Cord 127 mm (5 in.)

Spool of LED FlexTape 6 m (20 ft.)

Part #

7/64” 2.8 mm

1/2” 12 mm

Cord 127 mm (5 in.)

Power Supplies Starter Cord 79 in. 2m

TrescoBook_2019.indd 89

DC-ELT60-CON 3/8” Transformer 10 mm

COMPON ENTS

12VDC

1-1/2” Mounting Block 38 mm

Cord 127 mm (5 in.)

Power Supplie s

Starter Cord 2m 79 in.

10’ (3 m) 12VDC 2700K Ultra Output FlexTape® Roll

L-FLXTPE-48RU-1

10’ (3 m) 12VDC 4800K Ultra Output FlexTape® Roll

L-FLXTPE-65RU-1

10’ (3 m) 12VDC 6500K Ultra Output FlexTape® Roll

1-1/2” 38 mm

3/64” 1.2 mm

DC-ELT60-CON Transformer

10’ (3 m) 12VDC 3500K Ultra Output FlexTape® Roll

3/64” 1.2 mm

Hexhead Connector

Amp® Connector

Mounting Block

Cord 5 in. (127 mm)

L-FLXTPE-35RU-1

1/2” 12 mm

Hexhead Connector

Cord 5 in. (127 mm)

Description

L-FLXTPE-27RU-1

7/64” 2.8 mm

Maximum continuous run is 13’ (4 m). Maximum per power supply is FlexTape Spool of LED Cord 20(50 ft. (6m) 13’ (4 m). Mounts with adhesive backing. Cuttable every 2” mm). To bePower 2 m (79 in.) used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

3/8” 10 mm

1” 25 mm

DC-ELT60-CON Transformer

3/8” 10 mm

Power Cord 2 m (79 in.)

3/8” 10 mm

Maximum continuous run is 10’ (3 m). Maximum per power supply is 10’ (3 m). Mounts with adhesive backing. Cuttable every 1-1/2” (38 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion. MUST USE PROPER HEAT SINK (i.e. Infinex Aluminum Extrusions) Power Cord 2 m (79 in.)

Amp® Connector Cord141. For details see Power Supplies on Page 5 in. (127 mm)

1-800-227-1171 | trescolighting.com Mounting Block

Cord 5 in. (127 mm)

DC-ELT60-CON Transformer

6/20/19 5:19 PM

FlexTape

All product dimensions and specifications are subject to change without prior notice. Hexhead Connector

Starter Cord Amp® Connector

Part #

Description

L-LED-TPEPKT-2M-1

79” (2 m) FlexTape® Straight Starter Lead 2 m (79 in.)

L-TPEPKT-2IN-1

® 2” (50 Straight Starter Lead Cordmm) FlexTape 5 in.

Power Cord

(127 mm)

Starter Cord 79 in. 2m

5/8” (16 mm) hole required. Mounting Block FlexTape® Wattage

Cord 5 in. (127 mm)

DC-ELT60-CON

MaximumTransformer linear run from one starter cord

1.5W

20’ (6 m)

16.4’ (5 m)

4.4W

13’ (4 m)

5.5W

10’ (3m) MUST USE PROPER HEAT SINK

Tee Starter Cord

Part #

Description

L-LED-TPEPKT-2M-TEE-1

79” (2 m) FlexTape® Tee Starter Lead

5/8” (16 mm) hole required. 79 in. 2m

1-1/4 in. 32 mm

1/4 in. 6 mm

1/2 in. 13 mm

20 ft. Maximum (6 m) max. per side

run per Side 20 ft. (6 m) max.

Maximum run per side

Maximum run overall

1.5W

20’ (6 m)

40’ (12m)

16.4’ (5 m)

20’ (6 m)

4.4W

13’ (4 m)

Maximum run Overall

per side

max. per side

25 mm 1 in.

Optional Items

Part #

Back-to-Back 5/8 in. 15.4 mm Connector

L-TPELNK-BTB-1

16.4 ft. (5 m) max. on single side

1 in. 25 mm

Tee Connector

1/4 in. 6 mm

1/2 in. 13 mm

9/16 in. 14.5 mm

1-1/2 in. 38 mm 13 ft. (4 m) max. continuous run

1/2 in. 13 mm

Right Angle Connector 1/4 in. 6 mm 1/2 in.

1-1/2 in. 38 mm

25 mm 1 in.

Description Back-to-Back Connector 1/4 in. 6 mm

1/2 in. 13 mm

Part #

Description

L-LED-TPELNK-TEE-1

Tee Link Connector

1/4 in. 6 mm

1 in. 25 mm 1/4 in. 6 mm 1/4 in.

Part #

Description

L-LED-TPELNK-CON90-1

90° Link Connector

Part #

Description

L-LED-TPELNK-5-1

2” (5 cm) FlexTape® Link Cord

6 mm

13 mm

Jumper Cord

3/8 in. L-LED-TPELNK-15-1 10 mm 1/4 in.

1/16 in. -1/2 mm

6 mm

Positive and negative contacts on FlexTape® and FlexConnects should match-up to maintain proper polarity.

6” (15 cm) FlexTape® Link Cord

L-LED-TPELNK-25-1

10” (25 cm) FlexTape® Link Cord

L-LED-TPELNK-60-1

24” (60 cm) FlexTape® Link Cord

L-LED-TPELNK-120-1

48” (120 cm) FlexTape® Link Cord

L-LED-TPELNK-180-1

72” (180 cm) FlexTape® Link Cord

Spool of LED FlexTape 20 ft. (6m)

FlexTape® Wattage

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

TrescoBook_2019.indd 90

1-800-227-1171 | trescolighting.com

6/20/19 5:19 PM

12VDC FLEXIBLE LIGHTING

Edge Emitting FlexTape 110Â°

194 Lumens per ft. (636 per meter)

TrescoBook_2019.indd 91

6/20/19 5:19 PM

Edge Emitting FlexTape

Edge-Emitting FlexTapeÂŽ offers a lighting configuration to provide the perfect downlight or uplight grazing feature. Consistent coverage and illumination is attributed to the minimal diode spacing and ability to cut every 1-1/4â&#x20AC;?. This beautiful effect will add cutting edge appeal to all your lighting projects.

Easy-to-use connectors (no soldering!)

Strong 300 LSE 3MTM adhesive backing

Sold by the roll

Features:

Typical Applications:

Avg. rated life: 50,000 hours*

Restaurants, homes and retail stores

White color printed board maximizes light output

Decorative and accent lighting

Lower heat, longer life than competing brands

Downlighting and uplighting features

Available in multiple color temperatures

Edge lighting glass or acrylic plates

Dimmable

Trade show exhibit

Commercial grade 3-year warranty

Wall grazing

*When adhered to a metal substrate

TrescoBook_2019.indd 92

1-800-227-1171 | trescolighting.com

6/20/19 5:19 PM

Edge Emitting FlexTape

Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

2.5W/ft. (8.2 m/ft.)

Lumens

194 per ft. (636 per m)

Efficacy (lm/W)

Input Voltage

12VDC

Diode Life

Cuttable every 1-1/4” (31 mm)

50,000 Hours

Max Per 60W Power Supply

24’ (7.3 m)

Max Continuous Run

16.4’ (5 m)

Mounting

Surface

Warranty

3 Year

Certifications

Beam Angle

110° Photometric Data

Height

Light Output

1ft

80Fc

3ft

8.90Fc (9.7lx)

(2.9 m L x 2.5 m W)

6ft

2.22Fc

18.9ft L x 16.7ft W

(.3 m) (.9 m) (1.8 m)

(861.1lx)

Beam Area 3.1ft L x 2.8ft W

(.94 m L x .85 m W)

9.4ft L x 8.3ft W

(23.7lx)

(5.8 m L x 5.1 m W)

L-FLXTPE-65EER-1 Tested

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 3/8” (10 mm)

2700K

1/8” (3 mm) 5/64” (2 mm)

Warm (2700K)

3000K

4500K

Neutral (3500K)

5500K

Cool (4800K)

6500K

Daylight (6500K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 93

6/20/19 5:19 PM

1-1/2 mm 1/16 in. 3 mm 1/8 in.

17 mm 11/16 in.

5 mm 3/16 in.

Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

10 mm 3/8 in.

Jumper Cord

Edge Emitting FlexTape

All product dimensions and specifications are subject to change without prior notice.

1/16 in. Spool of LED FlexTape 1-1/2 mm 6 m (20 ft.)

10 mm 3/8 in.

1/8 in. 3 mm

11/16 in. 17 mm

Edge Emitting FlexTape®

3/8 in. 10 mm

1/16 in. 1-1/2 mm

Part #

Description

L-FLXTPE-27EER-1

16.4’ (5 m) 12VDC 2700K Edge Emitting FlexTape® LED Roll

L-FLXTPE-35EER-1

16.4’ (5 m) 12VDC 3500K Edge Emitting FlexTape® LED Roll 20 ft. (6m)

3/8” L-FLXTPE-48EER-1 10 mm 5/64”

16.4’ (5 m) 12VDC 4800K Edge Emitting FlexTape® LED Roll

3/8” 10 mm

2” 49 mm

1/8” 3 mm

Spool of LED FlexTape

2 mm

3/8” 10 mm

L-FLXTPE-65EER-1

1” 25 mm

16.4’ (5 m) 12VDC 6500K Edge Emitting FlexTape® LED Roll

Connector

3/8” 10 mm

Cord 127 mm (5 in.)

For details see Power Supplies on Page 141.

Edge Emitting FlexTape® works with all Tresco 12VDC power supplies.

Hexhead Connector

Starter Cord Amp® Connector

Starter Cord 79 in. 2m

Description

L-LED-TPEPKT-2M-1

2 m (79 in.) 79” (2 m) FlexTape® Straight Starter Lead

L-TPEPKT-2IN-1

Cord ® 5 in. mm) FlexTape 2” (50 Straight Starter Lead (127 mm)

Power Cord

Transformer

Mounting Block

79 in. 2m

1/2 in. 13 mm

Part #

5/8” (16 mm) hole required. Cord ® 5 in. DC-ELT60-CON Maximum linear run of Edge Emitting FlexTape LED from one starter cord is 16.4’ (5 m). (127 mm)

Tee Starter Cord 1-1/4 in. 32 mm

Maximum continuous run is 16.4’ (5 m). Maximum per power supply is 24’ (7 m). Mounts with adhesive backing. Cuttable every 1-1/4” (31 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

COMPON ENTS

3/8” 10 mm

DC-ELT60-CON Transformer

Mounting Block

1/4 in. 6 mm

Part #

Description

L-LED-TPEPKT-2M-TEE-1

79” (2 m) FlexTape® Tee Starter Lead

16.4’ (5 m) maximum per side of tee starter, 24’ (7 m) overall maximum per tee starter. 5/8” (16 mm) hole required.

20 ft. (6 m) max. per side

16.4’ (5 m)

max. per side

16.4’ (5 m)

1-1/2 in. 25 mm 38 mm 1 in.

16.4 ft. (5 m) max. on single side

Back-to-Back 5/8 in. 15.4 mm Connector 13 ft. (4 m) max. continuous run

Part #

Description

Total: 12 m (40’)

L-TPELNK-BTB-1

9/16 in. 14.5 mm

Tee Connector

1-1/2 in. 38 mm

1/2 in. 13 mm

Part #

1 in. 25 mm L-LED-TPELNK-TEE-1 25 mm 1 in.

1/2 in. 13 mm

Right Angle Connector

1/4 in. 6 mm

1 in. 251/4 mm in.

Jumper 13 mm Cord

Jumper Cord

Description Tee Link Connector

Part #

Description

L-LED-TPELNK-CON90-1

90° Link Connector

1/4 in. 6 mm

Part # L-LED-TPELNK-5-1 3/8 in. 10 mm

Description 2” (5 cm) FlexTape® Link Cord

L-LED-TPELNK-15-1

6” (15 cm) FlexTape® Link Cord

L-LED-TPELNK-25-1

10” (25 cm) FlexTape® Link Cord

L-LED-TPELNK-60-1

24” (60 cm) FlexTape® Link Cord

1/4 in. 6 mm

Positive and negative contacts on FlexTape® and FlexConnects should match-up to maintain proper L-LED-TPELNK-120-1 polarity. L-LED-TPELNK-180-1 Spool of LED FlexTape 20 ft. (6m)

1/4 in. Connector 6Back-to-Back mm

1/4 in. 6 mm 1/4 in. 6 mm

1/2 in. 13 mm

6 mm

1/2 in.

7.6’ (2 m)

Total: 24’ (7 m) maximum combined both sides

Total: 16.4’ (5 m) maximum per side

Optional Items

1/16 in. -1/2 mm

” m

Cord 127 mm (5 in.)

1-1/4”

31 mm Power Supplies

Power Cord 2 m (79 in.)

12VDC

Amp® Connector

3/8” 10 mm

1-1/4” 31 mm

5/64” 2 mm

Power Supplie s

1/8” 3 mm

48” (120 cm) FlexTape® Link Cord 72” (180 cm) FlexTape® Link Cord

1-800-227-1171 | trescolighting.com

” m TrescoBook_2019.indd 94

6/20/19 5:19 PM

TrescoBook_2019.indd 95

6/20/19 5:19 PM

12VDC FLEXIBLE LIGHTING

EquiLine Tape LED

The low profile and flexibility of our EquiLine Tape LED make it the perfect light for displays, signs and perimeter lighting. Our economical LED tape is sold by the roll and has adhesive backing for effortless installation.

Easy-to-use connectors (No soldering!)

Standard 200MP 3MTM adhesive backing

Sold by the roll

Features:

Typical Applications:

Avg. rated life: 25,000 hours*

Store fixtures

Available in multiple color temperatures

Edge lighting

Dimmable

Back lighting

*When adhered to a metal substrate

Accent lighting Cove lighting Toe kick Soffit

TrescoBook_2019.indd 96

1-800-227-1171 | trescolighting.com

6/20/19 5:20 PM

EquiLine Tape LED 1.5W

Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

1.5W/ft. (4.9W /m)

Input Voltage

12VDC

Diode Life

25,000 Hour

Max Per 60W Power Supply

40’ (12 m)

Max Continuous Run

20’ (6 m)

Mounting

Surface

Warranty

1 Year

Cuttable every 2”(50 mm)

Certifications

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 11/16” (16 mm)

1/8” (3 mm)

2700K

3/32” (2.3 mm)

Warm (2700K)

3000K

4500K

Neutral (3500K)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 97

Cool (4800K)

5500K

6500K

Daylight (6500K)

6/20/19 5:20 PM

EquiLine Tape LED 3W

Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

3W/ft. (9.8 W/m)

Input Voltage

12VDC

Diode Life

Cuttable every 1”(25 mm)

25,000 Hours

Max Per 60W Power Supply

20’ (6 m)

Max Continuous Run

16.4’ (5 m)

Mounting

Surface

Warranty

1 Year

Certifications

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 5/16” (7 mm)

2700K

1/8” (3 mm) 3/32” (2.3 mm)

TrescoBook_2019.indd 98

Warm (2700K)

3000K

4500K

Neutral (3500K)

Cool (4800K)

5500K

6500K

Daylight (6500K)

1-800-227-1171 | trescolighting.com

6/20/19 5:20 PM

EquiLine Tape LED 4.4W Specifications:

Dimensions: Actual Size

Back

Front 3/8” (10 mm)

Wattage

4.4W/ft. (14.4W/m)

Input Voltage

12VDC

Diode Life

Cuttable every 2”(50 mm)

25,000 Hours

Max Per 60W Power Supply

13’ (3.96 m)

Max Continuous Run

13’ (3.96 m)

Mounting

Surface

Warranty

1 Year

Certifications

Color Temperature Warm White

Warm to Neutral

Cool White

Daylight

Side 11/16” (17 mm)

2700K

3/16” (5 mm) 3/32” (2.3 mm)

Warm (2700K)

3000K

4500K

Neutral (3500K)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 99

Cool (4800K)

5500K

6500K

Daylight (6500K)

6/20/19 5:20 PM

1-1/2 mm 1/16 in. 3 mm 1/8 in.

17 mm 11/16 in.

Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

10 mm 3/8 in.

EquiLine Tape LED

All product dimensions and specifications are subject to change without prior notice.

5 mm 3/16 in.

10 mm 3/8 in.

Spool of LED FlexTape 6 m (20 ft.)

Required Items

Jumper Cord 1/16 in. 1-1/2 mm

Equiline Tape LED 1.5W

Part #

1/8 in. 3 mm

Description

11/16 in. L-TPELED-27SER-1

1/16 in. 1-1/2 mm

17 mm

L-TPELED-35SER-1

1-1/2 mm 1/16 in.

onnector 3 mm 1/8 in.

17 mm 11/16 in.

Jumper Cord 127 mm 5 in.

mm 1/8”1-1/2 1/16 in. 3 mm

11/16” 16 mm

Amp® Connector

10 mm 3/8 in.

1/8” 3 mm

3/32” 2.3 mm

3/16” 5 mm

11/16” 17 mm

1/8” 3 mm 3 mm 1/8 in.

17 mm 11/16 in.

1/8” 3 mm

5 mm 3/16 in.

11/16 in. 17 mm

3/8” 10 mm

3/32” 2.3 mm

Part #

Description

L-TPELED-27HER-1

Equiline 16.4’ (5 m) Roll Tape LED 2700K

L-TPELED-35HER-1

Equiline 16.4’ (5 m) Roll Tape LED 3500K Equiline 16.4’ (5 m) Roll Tape LED 4800K

L-TPELED-65HER-1 10 mm 3/8 in.

1” 25 mm

Power Cord 2 m (79 in.)

Equiline 16.4’ (5 m) Roll Tape LED 6500K

Spool of LED FlexTape 6 m (20 ft.) DC-ELT60-CON Transformer

Cord

127 mm (5 in.) 3/16” Tape LED 4.4W Equiline Mounting Block11/16” 5 mm 17 mm

1/8” 3 mm

11/16” 16 mm

Starter Cord 79 in. 2m 1/8”

5/16” 7 mm

3 mm

3/32” 2.3 mm 3/32” 2.3 mm

Jumper Cord

Amp® Connector

1/16 in. 1-1/2Part mm # 1/8 in. 3 mm

Hexhead3/32” Connector 2.3 mm

Spool of LED FlexTape 20 ft. (6m)

Maximum continuous run is 16.4’ (5 m). Maximum per power supply is 20’ (6 m). Mounts with adhesive backing. Cuttable every 1” (25 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

3/8” 10 mm

Cord 127 mm (5 in.)

10 mm 3/8 in.

3/8 in. 10 mm

1/16 in. 1-1/2 mm

3/8” L-TPELED-48HER-1 10 mm

Hexhead Connector 3/32” 2.3 mm

5/16” 7 mm

of LED Maximum continuous run is 20’ (6 m). Maximum per powerSpool supply is 40’FlexTape (12 m). 20be ft. used (6m) on clean, Mounts with adhesive backing. Cuttable every 2” (49 mm). To Jumper Cord TM smooth surfaces. Pressure must be applied for proper 3M tape adhesion.

2” 49 mm

Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

Amp® Connector

3/32” 2.3 mm

11/16” 16 mm

1-1/2 mm 1/16 in. Hexhead Connector

3/8” 10 mm

1/8 in. 3 mm

2.3 mm

Mounting Block

Equiline 20’ (6 m) Roll Tape LED 6500K

Spool of LED FlexTape 1” 6 m (20 ft.) 25 mm

DC-ELT60-CON 3/32” Transformer

Equiline Tape LED 3W

L-TPELED-65SER-1

1/16 in. 1-1/2 mm

Cord 127 mm (5 in.)

5/16” Cord 127 mm 7 mm (5 in.)

Equiline 20’ (6 m) Roll Tape LED 4800K

Power Cord 2 m (79 in.)

5 mm 3/16 in.

Equiline 20’ (6 m) Roll Tape LED 3500K

L-TPELED-48SER-1

10 mm 2” in. 3/8 49 mm

3/8 in. 10 mm

Equiline 20’ (6 m) Roll Tape LED 2700K

Description

Cord 5 in.

L-TPELED-27VER-1

mm) Equiline 13’ (3.96 m) Roll Tape LED(127 2700K

1/16 in. 17 mm L-TPELED-35VER-1 1-1/2 mm

Equiline 13’ (3.96 Cord m) Roll Tape LED 3500K

11/16 in.

L-TPELED-48VER-1

5 in. DC-ELT60-CON (127 mm) Transformer EquilineBlock 13’ (3.96 m) Roll Tape LED 4800K Mounting

L-TPELED-65VER-1

Equiline 13’ (3.96 m) Roll Tape LED 6500K

Power Cord 2 m (79 in.)

3/8 in. 10 mm

nector

Amp® Connector

3/16” 5 mm

2” 49 mm

11/16” 17 mm

3/32” 2.3 mm

Power Cord 2 m (79 in.)

Cord 127 mm (5 in.) Cord 127 mm (5 in.)

DC-ELT60-CON Transformer

Mounting Block

Starter Cord Power Supplies 79 in. 2m

3/8” 10 mm

Maximum continuous run is 13’ (3.96 m). Maximum per power supply is of LED FlexTape 13’ (3.96 m). Mounts with adhesive backing. Cuttable every 2”Spool (50 mm). To be 20 ft. (6m) used on clean, smooth surfaces. Pressure must be applied for proper 3MTM Power Cord 2 m (79 in.) tape adhesion.

3/8” 10 mm

Cord 5 in. (127 mm)

Amp® Connector

1” 25 mm

Part #

L-DC-ELT12-CON-1

Cord 5 in.

DC-ELT60-CON (127 mm) 12W 12VDC Power Supply w/6 Snap Mounting Block* Transformer

Mounting Block

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

12VDC

COMPONEN TS

Power Supplie s

L-DC-ELT18-CON-1

Description

For details see Power Supplies on Page 141. Hexhead Connector

Amp® CORDS AND CONNECTORS SEE PAGE 94 FOR STARTER Connector

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141. Cord 5 in. (127 mm)

Starter Cord 79 in. 100 2 m

TrescoBook_2019.indd 100

Cord 5 in.

(127 mm) 1-800-227-1171 | Mounting trescolighting.com Block

DC-ELT60-CON Transformer

6/20/19 5:20 PM

Infinex For video visit: trescolighting.com/videos

TrescoBook_2019.indd 101

6/20/19 5:20 PM

Infinex

Infinex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixture sizes â&#x20AC;&#x201C; simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is available in six profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. US PATENT NO: D783,533 and 9,618,194

5 profiles to choose from

FlexTapeÂŽ slides into proprietary power feed end cap

Clear, frosted & milk diffusers snap on/off for easy installation and removal Diode blending film available for clear diffusers

Mounting Types SCREW

U-CLIP

SWIVEL CLIP

MAGNET

RECESSED

See individual profiles for mounting options available

IN MADE THE USA

102

TrescoBook_2019.indd 102

1-800-227-1171 | trescolighting.com

6/20/19 5:21 PM

Infinex

AVAILABLE FINISHES See extrusion styles for finishes available.

Available in a variety of finishes. Custom finishes also available

In Stock

Satin Nickel (SC)

White (WH)

Black (BL)

Dark Cherry (DC)

Natural Soft Maple (NSM)

Available with 1000 Ft. Min. Order

? Medium Cherry

Light Cherry

Contemporary Cherry

Walnut

Natural Oak

Dark Oak

Pear

Color Matching

* Color Matching will match any color sample and is available with 1000 ft. minimum order

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 103

103

6/20/19 5:22 PM

Infinex

ACCESSORIES INFINEX LINKING CORDS

INFINEX COUPLERS

Features

Each linking cord comes with a male and a female end for simplified installation

Includes 10 couplers and 1 Allen wrench per set Effortlessly connect scrap pieces of square or curved extrusions

Multiple lengths available to service any application

Custom Solutions CUSTOM SOLUTIONS Take control of your lighting your through Tresco’s custom Infinex solutions. From length, to light output, to screw versus magnetic mounting, you dictate the options of your unique fixture. Once decided, we will manufacture it in our USA headquarters. No more worries about international shipping delays or extended holidays. Every light is quality checked and bears the cULus marking denoting its safe operation. Don’t settle for something “close”, choose Infinex and get exactly what you want. Go to trescolighting.com to submit your project and receive a custom quote.

CUSTOM FULLY ASSEMBLED FIXTURES

LOW MINIMUM REQUIREMENT

MADE IN THE U.S.A. AND SHIPS WITHIN 7 DAYS! 6 unique profiles 15 light output options Black or white cords (multipe lengths) 4”- 96” fixture lengths in 1/16” increments 3 diffuser options (clear, frosted, milk) Bulk, individual, or kit packaged Low minimum quantity required Quick turnaround

104

TrescoBook_2019.indd 104

1-800-227-1171 | trescolighting.com

6/20/19 5:22 PM

Infinex

DIY INFINEX IN 4 STEPS

CHOOSE YOUR STYLE & FINISH 6 unique profiles to choose from!

CURVE

SQUARE

ROUND

FLUSH

CHOOSE YOUR FLEXTAPE® & DIFFUSERS For FlexTape® options see the 12VDC Flexible section. CLEAR DIFFUSER WITH OPTIONAL DIODE BLENDING AND GLARE REDUCING FILM

CLEAR DIFFUSER

FROSTED DIFFUSER

MILK DIFFUSER

1.5W FlexTape

3W FlexTape

4.4W FlexTape

5.5W FlexTape

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 105

RECESSED

ANGLE

105

6/20/19 5:23 PM

Infinex

CUT TO SIZE

Aluminum extrusions can be cut by various pieces of equipment. For the best performance and longest life, use a saw blade designed for non-ferrous, thin stock on your miter saw. It is also highly recommended to cut extrusion with diffuser securely attached via clamps, tape, stretch wrap etc. to prevent unwanted cracking of diffuser.

ASSEMBLE Diffuser

Diode Blending Film Starter Cord FlexTape

Screw

Screw End Cap Magnet

U-Clip Square extrusion shown. Check mounting options for other extrusions.

Extrusion

Magnet

End Cap

U-Clip

106

TrescoBook_2019.indd 106

1-800-227-1171 | trescolighting.com

6/20/19 5:26 PM

Infinex

EXTRUSION STYLES AND FEATURES Top View

SQUARE

Profile

11/16” (18 mm)

1/2” (12 mm)

MOUNTING

End Caps Sold Separately

Features

Available stock finishes

Surface mount using magnets, U-Clips or screws Easily slide magnets into channel on bottom of light Satin Nickel (SC)

CURVE

White (WH)

Black (BL)

Top View

Dark Cherry (DC)

Natural Soft Maple (NSM)

Profile

1-11/16” (42.5 mm)

1/2” (13 mm)

MOUNTING

End Caps Sold Separately

Features

Available stock finishes

Surface mount using magnets, U-Clips or screws Easily slide magnets into channel on bottom of light Satin Nickel (SC)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 107

White (WH)

Black (BL)

Dark Cherry (DC)

Natural Soft Maple (NSM)

107

6/20/19 5:27 PM

Infinex

Profile

ANGLE

9/16” (14 mm)

Top View

1-1/8” (28.5 mm)

11/32” (9 mm)

MOUNTING

30° Angle End Caps Sold Separately

Features

Available stock finishes

For corner mounting with screws only Fixture directs light at 30° angle Satin Nickel (SC)

White (WH)

Black (BL)

Natural Soft Maple (NSM)

Profile

Top View

ROUND

Dark Cherry (DC)

11/16” (18 mm)

1” (25 mm)

MOUNTING

0°

15°

30° End Caps Sold Separately

Features U-Clip mounting allows fixture to be rotated in 15° increments either direction (30°, 15°, 0°, -15°, -30°)

Available finishes

Satin Nickel Satin Nickel

108

TrescoBook_2019.indd 108

1-800-227-1171 | trescolighting.com

Black Black

6/20/19 5:28 PM

Infinex

RECESSED

Profile

Top View

1/16” (2 mm) 5/16” (8 mm)

7/8” (23 mm)

MOUNTING

7/8” (22.6 mm)

~7/8 [22,6]

1/4” (6 mm)

11/16” (18 mm)

Features

~1/4 [6,4]

End Caps Sold Separately

~11/16 [17,7]

7/16” (11.5 mm)

Grooved sides allow extrusion to pressure fit into place*

Recessed End Cap Dimensions:

Uses standard FlexTape® starter lead

7/8” (22.6 mm)

*With Endcap: Route a channel in wood 21/64” (8.33 mm) depth minimum x .750” (19 mm) width and pressure fit this extrusion in place. Without Endcap: Route a channel in wood 9/32” (7.14 mm) depth minimum x .750” (19 mm) width and pressure fit this extrusion in place.

1/4” (6 mm)

7/16” (10.6 mm)

~7/16 [11]

3/4” (19.4 mm)

11/16” (18 mm) ~3/4 [19,4]

Recessed extrusion uses standard FlexTape® starter lead. (L-LED-TPEPKT-2M-1)

7/16” (11.5 mm)

3/8” (9 mm)

Available finishes 7/16” (10.6 mm)

3/4” (19.4 mm)

FLUSH

Satin Nickel

Black

Profile

Top View

3/4” (19 mm)

7/16” (11 mm)

MOUNTING

No End Caps

Features No end caps…this extrusion is meant for channels that go the entire width or height of the casework

Available finishes

Comes with milk diffuser (unattached) Uses standard FlexTape® starter lead *Route a channel in wood 7/16” (11mm) x .750” width and pressure fit this extrusion in place.

Satin Nickel

Flush extrusion uses standard FlexTape® starter lead. (L-LED-TPEPKT-2M-1)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 109

109

6/20/19 5:28 PM

Infinex

All product dimensions and specifications are subject to change without prior notice.

Required Items Extrusions

9/16” (14 mm)

L-XANG72

1-1/8” (28.5 mm)

11/32” (9 mm)

1 -11/16” (42.5 mm)

L-XCRV72

1/2” (13 mm)

Part #

Description

Suggested List Price

L-XANG72-SC-1

72” (1.8 m) Angled Extrusion Satin Clear

$45.70

L-XANG72-**-1

72” (1.8 m) Angled Extrusion Other Finishes*

$69.00

L-XCRV72-SC-1

72” (1.8 m) Curved Extrusion Satin Clear

$67.55

L-XCRV72-**-1

72” (1.8 m) Curved Extrusion Other Finishes*

$80.65

L-XREC72-SC-1

72” (1.8 m) Recessed Extrusion Satin Clear

$39.60

L-XREC72-BL-1

72” (1.8 m) Recessed Extrusion Black

$47.30

L-XRND72-SC-1

72” (1.8 m) Round Extrusion Satin Clear

$54.80

L-XRND72-BL-1

72” (1.8 m) Round Extrusion Black

$64.70

L-XSQR72-SC-1

72” (1.8 m) Square Extrusion Satin Clear

$40.75

L-XSQR72-**-1

72” (1.8 m) Square Extrusion Other Finishes*

$63.50

L-XFL72-SC-1

72” (1.8 m) Flush Extrusion Satin Clear with Milk Diffuser

$58.45

**Insert BL for Black, WH for White, DC for Dark Cherry, NSM for Natural Soft Maple 1/16”

(2 mm)

L-XREC72

7/8” (23 mm)

Power Supplie s

Power Supplies

Diffusers/Film

11/16” (18 mm)

3/16” (5 mm)

For details see Power Supplies on Page 141. Infinex works with all Tresco 12VDC power supplies.

Part #

Description

Suggested List Price

L-X72-DIFF-CL-1

72” (1.8 m) Diffuser Clear

$16.55

L-X72-DIFF-FR-1

72” (1.8 m) Diffuser Frosted

$16.55

L-X72-DIFF-MLK-1

72” (1.8 m) Diffuser Milk

$18.85

L-X72-DBF-1

72” (1.8 m) Diode Blending Film

$9.55

Diode Blending Film to be used with clear diffuser only. Flush extrusion come with its own diffuser.

.71 [18,1]

End Cap Sets

L-XANGECP

7/16” .71 (11 mm) [18,1]

3/4” (18 mm)

Part #

Description

Suggested List Price

L-XANGECP-GY-1

Angled end cap set, Gray

$4.05

L-XANGECP-**-1

Angled end cap set, Other Colors*

$4.65

L-XCRVECP-GY-1

Curved end cap set, Gray

$4.05

L-XCRVECP-**-1

Curved end cap set, Other Colors*

$4.65

L-XRECECP-GY-1

Recessed end cap set, Gray

$4.05

L-XRECECP-BL-1 7/8”

Recessed end cap set, Black

$4.65

Round end cap set, Gray

$4.05

Round end cap set, Black

$4.65

(22.6 mm)

L-XRNDECP-GY-1 L-XCRVECP

9/16” (14 mm)

L-XRNDECP-BL-1 11/16” L-XSQRECP-GY-1 (18 mm)

1-11/16” (42.5 mm)

L-XSQRECP-**-1

1/4” (6 mm)

7/16” (11.5 mm)

Square end cap set, Gray

$4.65

Flush extrusion does not take end caps. L-XRNDECP

3/4” (19 mm)

3/4” (19.4 mm)

TrescoBook_2019.indd 110

.71 [18,1]

**Insert BL for Black, WH for White, B1 for Dark Brown, B2 for Tan

7/16” (10.6 mm)

$4.05

Square end cap set, Other Colors*

L-XRECECP

110

3/4” (19 mm)

11/16” (18 mm)

1” (25 mm)

3/4” (19 mm)

L-XFL72

7/16” (11 mm)

1/2” (12 mm)

11/16” (18 mm)

5/16” (8 mm)

L-XSQR72

L-XRND72

L-XSQRECP

17/32” (14 mm)

1” (25 mm)

3/4” (18 mm)

1-800-227-1171 | trescolighting.com

6/20/19 5:28 PM

Infinex

Starter Cord

Part #

Description

Suggested List Price

L-XPKT-2M-WH-1

79” (2 m) Starter Cord White

$10.15

L-XPKT-2IN-WH-1

2” (50 mm) Starter Cord White

$4.95

L-XPKT-2M-BL-1

79” (2 m) Starter Cord Black

$10.15

L-XPKT-2IN-BL-1

2” (50 mm) Starter Cord Black

$4.95

To be used on square, curved, round and angled extrusions only. Recessed and Flush extrusions uses standard FlexTape® starter lead. (L-LED-TPEPKT-2M-1) .59 [15]

Optional Items

.59 [15]

U-Clips/Magnets 5/16” (8 mm)

9/16” (15 mm)

13/16” (20 mm)

1” (26 mm)

L-XSQR-UCLP

L-XRND-UCLP

SIDE

Part #

Description

Suggested List Price

L-XRND-UCLP-1

Round U-Clips Set (2 Clips)

$2.90

L-XSQR-UCLP-1

Square/Curved U-Clips Set (2 Clips)

$2.90

L-XSQRSWCLP-1

Square/Curved Swivel Clips Set (2 Clips)

$5.20

L-XRM42-155-1

Set of 2 Magnets

$5.50

One U-Clip/magnet is recommended for every 1 ft. (.3 m) of extrusion. No. #4 Phillips flat head screws are included with each U-Clip set.

.75” (19mm)

1.25” (38mm)

1.5” (38 mm)

BOTTOM

1/2” (13 mm)

1/16” (2 mm)

L-XSQRSWCLP

1/2” (13 mm)

.65in (16mm)

1/16” (2 mm)

L-XRM42-155 1.25in (38mm)

1.5” (38 mm)

Couplers 1.5” (38mm)

.5” (13mm)

Part #

Description

Suggested List Price

L-EXTBTB10-1

Pack of 10 Couplers

$23.95

To be used on square and curved extrusions only.

.5in (13mm)

Linking Cords

.5in (13mm)

6” (152mm) 10” (254mm) 24” (609mm) 48” (1.2m) 72” (1.8m) .0.5” (13mm)

.0.6” (15mm)

B AMP (FEMALE)

AMP (MALE)

Part #

Description

Suggested List Price

L-XLNK-15-**-1

6” (15 cm) 12VDC Infinex Linking Cord

$11.15

L-XLNK-25-**-1

10” (25 cm) 12VDC Infinex Linking Cord

$11.60

L-XLNK-60-**-1

24” (60 cm) 12VDC Infinex Linking Cord

$13.20

L-XLNK-120-**-1

48” (120 cm) 12VDC Infinex Linking Cord

$14.50

L-XLNK-180-**-1

72” (180 cm) 12VDC Infinex Linking Cord

$16.40

** Insert BL from Black and WH for White XLNK-6 6in (152mm)

End Caps not used on linked extrusion ends.

XLNK-10 A=10in (254mm) XLNK-24 A=24in (609mm) XLNK-48 A=48in (1.2m)

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

XLNK-72 A=72in (1.8m)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 111

111

6/20/19 5:28 PM

112

TrescoBook_2019.indd 112

1-800-227-1171 | trescolighting.com

6/20/19 5:28 PM

12V DC PANEL LIGHTING

Etch

NEW

Listed in SAM Manual

TrescoBook_2019.indd 113

100 Lumens per watt

5W/ft. (16.4W/m)

6/20/19 5:29 PM

Etch

Etch Panels provide the perfect solution for commercial and residential backlighting and shelf lighting applications with high light output, uniform intensity and an extremely low profile between the LED panel and the illuminated material. Order it fully constructed or pre-etched panels only. US PATENT NO: 10,113,708

facility in Louisville, KY

Unique patented edge-lighting and LED process provides high output with even illumination

Requires zero separation between the light panel

Multiple decorative diffuser options available

Made in the USA at Trescoâ&#x20AC;&#x2122;s manufacturing

and the backlit surface

Features:

Typical Applications:

Fully customized, assembled, and ready to plug-in

Displays

Panels and components available a la carte

Exhibits

Available in five color temperatures: 3000K, 3500K,

Signage

4000K, 5500K and 6500K

Store Fixtures

7-day production time*

Countertops

Dimmable

Backsplashes

Commercial grade 3-year warranty

Modesty Panels Shelving

*High volume orders will begin shipping within 7 days but may not ship in full

114

TrescoBook_2019.indd 114

1-800-227-1171 | trescolighting.com

6/20/19 5:29 PM

Etch Specifications:

Dimensions: Front /Back Up to 48” (1219 mm)

Wattage

5W/ft. (16.4W/m) Per LED populated edge of panel

Lumens

100 per watt

Input Voltage

12V DC

012518

Up to 96” (2438 mm)

Etch Panel - A2. Standard wire option detail

Side

Acrylic Only

Fully Assembled with backer

5/16” (8 mm)

3/8” (9.8 mm)

Diode Life

50,000 Hours

Mounting

Surface

Minimum Size

4” x 4” (102 mm x 102 mm)

Maximum Size

48” x 96” (1219 mm x 2438 mm)

Environment

Dry and damp locations only

1/16” (1.5 mm)

Warranty

3 Year

Certifications Listed in SAM Manual 11/32” (8.8 mm)

Color Temperature Warm White

2700K

Warm to Neutral

3000K

(3000K) (3500K) (4000K)

Cool White

4500K

Daylight

5500K

6500K

(5500K)

(6500K)

Thicknesses are subject to the industry standard of +/-10 % for acrylic

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 115

115

6/21/19 8:35 AM

Etch Specifications by Size Size

LED Strip

Wattage

Wire Exits

6” x 6” (152 mm x 152 mm)

1 Edge

2.5W

12” x 12” (305 mm x 305 mm)

1 Edge

24” x 24” (610 mm x 610 mm)

2 or 4 Edges

20W/40W

36” x 36” (915 mm x 915 mm)

2 or 4 Edges

30W/60W

48” x 48” (1219 mm x 1219 mm)

2 or 4 Edges

40W/80W

48” x 96” (1219 mm x 2438 mm)

2 Edges

60W

How to Select Number of LED Edges One Edge

Two Edges

All Edges

Panel width up to 15” (381 mm)

Panel width over 15” (381 mm)

Typically used for perfect squares and larger sizes.

Typical Surface Brightness Measure 10% drop in surface illuminates from edge of panel to center. 96” (2438 mm)

LEDs

48” (1219 mm)

10% Drop

LEDs

116

TrescoBook_2019.indd 116

1-800-227-1171 | trescolighting.com

6/21/19 8:35 AM

Etch Minimize Seams When Tiling

1 or 2 sided Illumination

Minimum distance to minimize seams between material and Etch panels. 1-Sided

Backlit Material

Backer

2-Sided (No Backer) 3” min. distance

(Depending on backlit material)

Panel 1

Panel 2

Cord Exit Options 79” (2 m) Starter cord location is customizable Etch Panel - A1. Standard wire option Standard Wire Exit

Etch Panel - B1. Side wire option

Side Wire Exit

012418

Exit LED Side

Etch Panel - C1. Bottom wire option

Exit Short/Non-LED Side

id e Etch Panel - B2. Side wire option detail DS 012518 Etch Panel - A2. StandardDwire Sid option detail LE

E Etch Panel - A2. Standard wire option detail L

ide

DS Etch Panel - C2. Bottom wireLEoption detail

012518

Etch Panel - B2. Side wire option detail

012518

Bottom Wire Exit

012518

Etch Panel - C2. Bottom wire option detail

121417

Metal Clip Acrylic

Metal Clip

Metal Clip Acrylic

11/32” (8.8 mm)

11/32” (8.8 mm) Backer

3/8” (9.8 mm)

79” (2 m) 1/16” (1.5 mm)

79” (2 m)

Strain Relief

Backer

Metal Clip

3/8” (9.8 mm)

1/16” (1.5 mm)

3/8” (9.8 mm)

Strain Relief

1/16” (1.5 mm)

11/32” (8.8 mm) 1/16” (1.5 mm)

Backer

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 117

Acrylic

11/32”11/32” (8.8 mm) (8.8 mm)

79” (2 m)

Acrylic

3/8” (9.8 mm)

Strain Relief

Acrylic

1/16”

Metal(1.5 Clipmm)

1/16” (1.5 mm)

17/32” (13.5 mm)

11/32” (8.8 mm)

Backer

17/32” (13.5 mm)

79” (2 m)

79” Strain Relief (2 m)

Strain Relief

117

6/21/19 8:36 AM

Etch Mounting Options

Cosmetic Tape Color The cosmetic tape hides the LEDs and reflects light back into the panel. Cosmetic tape overlaps the face of the panel only along the LED side. On all sides without LEDs, the cosmetic tape only runs along the edge of the panel.

Secure panel with screws Drilling Instructions*: - Drill pilot holes before securing with screws - Use the highest grit bit as possible - Drill on flat supportive surface - Don’t drill within 1/4” of edge of panel *Tresco Lighting is not responsible for any splintering or any other errors that may occur with drilling a panel on site.

1/4” (7 mm)

Area safe to drill*

Silver

White

Flush with side

Mounting Clips Optional mounting clips available.

Covers LEDs on LED side COMING SUMMER 2019

Decorative Diffusers Decorative diffusers are optional additions for one or both sides of panel. They are useful for both diffusing the light emitted from the panel and for their unique aesthetic designs. Common applications are for decorative shelving and facades. Decorative film diffusers available up to 24” x 72” (610 mm x 1829 mm)

FROSTED

2.5 MM HEXAGON PATTERN

10 MM HEXAGON PATTERN

TRI-PYRAMID PATTERN

TRIPLE WAVE PATTERN

Rigid diffusers available up to 48” x 96” (1219 mm x 2438 mm). Available in Milk and Frost only.

118

TrescoBook_2019.indd 118

1-800-227-1171 | trescolighting.com

6/21/19 8:36 AM

Etch

BUILD YOUR OWN Choose our Build Your Own Program, featuring pre-etched acrylic panels in four sizes and pre-soldered LED tapes in five color temperatures in any length up to 96” (2438 mm), for the perfect DoIt-Yourself LED panel. Simply purchase your preferred size and color temperature and install in your own frame. 1. Buy pre-cut panels or cut-to-size

2. Buy 6 mm LED tape and components

3. Install in your frame

Etched Panels Only - to be cut down to size Part #

Description

L-ACR6M-4X8-1

48” X 96”* (1219 mm x 2438 mm) 6 mm Etched Acrylic

L-ACR8M-4X8-1

48” X 96”* (1219 mm x 2438 mm) 8 mm Etched Acrylic

L-ACR6M-4X4-1

48” X 48”* (1219 mm x 1219 mm) 6 mm Etched Acrylic

L-ACR8M-4X4-1

48” X 48”* (1219 mm x 1219 mm) 8 mm Etched Acrylic

L-ACR6M-2X2-1

24” X 24” (610 mm x 610 mm) 6 mm Etched Acrylic

L-ACR8M-2X2-1

24” X 24” (610 mm x 610 mm) 8 mm Etched Acrylic

L-ACR6M-1X1-1

12” X 12” (305 mm x 305 mm) 6 mm Etched Acrylic

L-ACR8M-1X1-1

12” X 12” (305 mm x 305 mm) 8 mm Etched Acrylic

*Standard dot pattern optimized for up to 24” (610 mm) width with LEDs on 2 edges Thicknesses are subject to the industry standard of +/-10 % for acrylic

Tape LED for Etch Panels Part #

Description

L-TPE6-12IN-**K-1

12” (305 mm) 5.5W/ft,6 mm Pre-Soldered Tape LED (79” (2 m) White input Lead)

L-TPE6-24IN-**K-1

24” (610 mm) 5.5W/ft, 6 mm Pre-Soldered Tape LED (79” (2 m) White input Lead)

L-TPE6-48IN-**K-1

48” (1219 mm) 5.5W/ft, 6 mm Pre-Soldered Tape LED (79” (2 m) White input Lead)

L-TPE6-96IN-**K-1

96” (2438 mm) 5.5W/ft, 6 mm Pre-Soldered Tape LED (79” (2 m) White input Lead)

** = color temperature (30 for 3000K, 35 for 3500K, 40 for 4000K, 55 for 5500K, 65 for 6500K) *Custom wire lead available upon request

12V Bottom COMPONENTS: Wire Exit POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 119

119

6/21/19 8:37 AM

Etch

All product dimensions and specifications are subject to change without prior notice.

We recommend ordering a kit before placing an order:

ETCH ORDERING GUIDE

Part #

Description

L-PANELKIT-DO1

8”x10” (203 mm x 508 mm) Panel With Backer & Power Supply

L-PANELKIT-DO2

8”x10” (203 mm x 508 mm) Panel Without Backer & Power Supply

Name: ___________________________________________

Project Name: ____________________________________

Company: ________________________________________

Project Description: ________________________________

Phone: __________________________________________

Estimated Volume: _________________________________

Email: ___________________________________________

Date Required: ____________________________________

Etch Panel - A2. Standard wire option detail

Etch Panel - A1. Standard wire option

012518

012418

Etch Panel - B2. Side wire option detail

012518

Distributor: _______________________________________ Etch Panel - B1. Side wire option

Metal Clip

1 Panel Dimensions 48” x 96” (1219 mm x 2438 mm) max

Acrylic

79” (2 m)

Channel Width (in): ___________

Etch Panel - C2. Bottom wire option detail Backer

1/16” (1.5 mm)

121417

Strain Relief

Standard Wire Exit

Channel Depth (in): ___________

Width (in): _____________

3/8” (9.8 mm)

11/32” (8.8 mm)

If used in frame:

Length (in): ____________

012518

Etch Panel - C1. Bottom wire option

012518

Metal Clip Acrylic

Actual panel length/width will be reduced by 3.5 mm to account for connector.

3/8” (9.8 mm)

11/32” (8.8 mm)

79” (2 m)

2 LED Location Long Edge (Standard)

3 Mounting Clips Yes

4 Wire Exit

Strain Relief

Side Wire Exit

Standard

Metal Clip Acrylic

Short Edge

Side

5 LED Color Temperature

1/16” (1.5 mm)

11/32” (8.8 mm)

17/32” (13.5 mm)

Backer

Bottom

Unsure (Tresco to specify)

Backer

1/16” (1.5 mm)

79” (2 m)

Strain Relief

Bottom Wire Exit

6 Backer

7 Cosmetic Tape Color

8 Decorative Diffusers COMING SUMMER 2019

3000K

Yes (Single Sided)

White (Standard)

3500K

No (Double Sided)

Silver

Frosted 2.5 mm Hexagon Pattern 10 mm Hexagon Pattern

4000K

Tri-Pyramid Pattern

5500K (Standard) 6500K

Triple Wave Pattern

Submit form to customquotes@trescolighting.com or fax to 502-491-2215 c/o Tresco Lighting To order online visit: trescolighting.com/etch-form

120

TrescoBook_2019.indd 120

Frosted (Ridged) Milk (Ridged) None

1-800-227-1171 | trescolighting.com

6/21/19 8:37 AM

12VDC SPECIAL SERIES

iMAGine Gondola Track Â®

121

TrescoBook_2019.indd 121

6/20/19 5:32 PM

iMAGine® Gondola Track

Bring the simplicity of the iMAGine® Track system to gondola shelving displays with iMAGine® Gondola Track. Connect the starter cord to any Tresco 12V fixture that works for your shelving unit and enjoy an easy, customized lighting design. This system allows for easy retrofitting of existing gondolas. US PATENT NO: 7,766,502

Starter cords allow you to integrate any

Quick release feature allows you to

Tresco 12V lights into the iMAGine® system

remove shelf without damaging light

The most adjustable power track and

White and chrome tracks blend in

lighting system available

perfectly with traditional retail shelving

Features:

Typical Applications:

Cuttable 39” (1 m) and 72” (1.8 m) white or chrome track

Adjustable shelving

Snap on do-it-yourself power feeds and connectors Easy to retrofit existing gondolas Fits almost all major gondola brands and styles Safety listed Class 2 low voltage system Compatible with entire Tresco 12VDC product offering

Available Finishes for Track:

White (WH)

122

TrescoBook_2019.indd 122

Chrome (CH)

1-800-227-1171 | trescolighting.com

6/20/19 5:33 PM

iMAGine® Gondola Track End Cap

Installation Black shown, also available in white.

Light Starter Cord (Included with Magnet Adapter)

Magnet Adapter

For FineLine Connection (L-MAG-ASTK)

7/8” (22 mm)

For LINKD Connection (L-MAG-ALNK) 1/2” (13 mm)

1-1/4” (31.5 mm)

For SimpLED Connection (L-MAG-ASMP)

Center Track Support (optional)

For Eurolinx Connection (L-MAG-AEUL) 1/2” (13 mm)

3/4” (19 mm)

Track/Magnetic Power Strip

15/16” (24 mm)

Straight Power Feed

1-7/16” (37 mm)

5/8” (16 mm)

7/16” (11 mm)

12VDC Class 2 60W Power Supply

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 123

123

6/20/19 5:33 PM

iMAGine® Gondola Track

All product dimensions and specifications are subject to change without prior notice.

Required Items

39 in. (990 mm) max Track

Track/Magnetic Power Strip

7/16 in. 11 mm

3/16 in. 5 mm

Din. 1-7/16 L-mm kni37

5/8 in. 16 mm

.66

”2/131 mm

41-

7/8 in. 22 mm

1-1/8 in. 29 mm

3/8 in. 10 mm

1-1/41-1/8 in. in. 29 mm 31.5 mm

n Ck

1/2 in. 13 mm

5/8 in. 16 mm

LINKD oH s el :ezi 21-5/8 /1 in.in. ”1-7/16 41 3mm 1(

SimpLED 2-1/8 in. 54 mm

c5 ( m 51 )"2 mc 2 ( c5 )"6 ( m 06 c 1 )"0 2( m 021 c )"4 ( m 081 c 4 )"8 7( m )"2

)mm

37 mm

1-1/16 in. 27.3 mm

1-1/4 in. FineLine

1-1/4 in. 32 mm

32 mm

2 in. Eurolinx 50 mm

1-7/16 in. 38 mm

7/8 in. 22 mm

3/8 in. 10 mm

6 in. (15 cm) 2 in. 10 in. (25 cm) 24 in. (60 50 cm)mm 48 in. (120 cm) 72 in. (180 cm)

1-1/4 in. 321/2 mm in. 13 mm

Optional Items

66. LED -Link Cord D

8 mm /5( 1 )"6

72” (2 m) White Track w/12” Power Feed, End Cap

Part #

Description

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

Part #

Description

L-MAG-ECP-PWR-1

12” (304 mm) Black Straight Track Power Feed, Includes End Cap

L-MAG-ECP-PWR-WH-1

12” (304 mm) White Straight Track Power Feed, Includes End Cap

Part #

Description

L-MAG-ALNK6-**-1

6” (15 cm) 12VDC LINKD with Magnet Adaptor

L-MAG-ALNK13-**-1

13” (33 cm) 12VDC LINKD with Magnet Adaptor

L-MAG-ALNK17-**-1

17” (43 cm) 12VDC LINKD with Magnet Adaptor

L-MAG-ALNK25-**-1

25” (63 cm) 12VDC LINKD with Magnet Adaptor

L-MAG-ASMP6-**-1

6” (15 cm) 12VDC SimpLED with Magnet Adaptor

L-MAG-ASMP13-**-1

13” (33 cm) 12VDC SimpLED with Magnet Adaptor

L-MAG-ASMP17-**-1

17” (43 cm) 12VDC SimpLED with Magnet Adaptor

L-MAG-ASMP25-**-1

25” (63 cm) 12VDC SimpLED with Magnet Adaptor

L-MAG-ASTK6-**-1

6” (15 cm) 12VDC FineLine with Magnet Adaptor

L-MAG-ASTK13-**-1

13” (33 cm) 12VDC FineLine with Magnet Adaptor

L-MAG-ASTK17-**-1

17” (43 cm) 12VDC FineLine with Magnet Adaptor

L-MAG-ASTK25-**-1

25” (63 cm) 12VDC FineLine with Magnet Adaptor

L-MAG-AEUL6-**-1

6” (15 cm) 12VDC Eurolinx with Magnet Adaptor

L-MAG-AEUL13-**-1

13” (33 cm) 12VDC Eurolinx with Magnet Adaptor

L-MAG-AEUL17-**-1

17” (43 cm) 12VDC Eurolinx with Magnet Adaptor

L-MAG-AEUL25-**-1

25” (63 cm) 12VDC Eurolinx with Magnet Adaptor

Part #

Description

L-LED-LINKD-25-1

10” (25 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-60-1

24” (60 cm) 12VDC Starter/Link/Extension Cord

Used to extend straight power feed.

Center Track Support 3/8 in. 10 mm

3/4 in. 19 mm

1/2 in. 13 mm

Hole size:

1/2”

1/2” (13 mm) (13 mm)

Power Feed 1.5”

Part #

Description

L-MAG-CSPPT-1

Track Center Support, Black

L-MAG-CSPPT-WH-1

Track Center Support, White

1/16” (2 mm)

15/16 in. 24 mm

(38 mm)

12” Part #

Description

L-XRM42-155-1

Set of 2 Magnets

L-VHBTPE-1134-1

7/16” (11 mm) x 111-1/2’ (34 m) VHB Adhesive Tape Roll

1/2” (13 mm)

1/16” (2 mm)

Track Link

124

TrescoBook_2019.indd 124

72” (2 m) Chrome Track w/12” Power Feed, End Cap

L-MAG-TR-2M-WH-1

2 in. (50 mm)

1-1/4 in. 32 mm

Magnets

L-MAG-TR-2M-CH-1

01-14-10

03 mm /3-1( 1 )"6

1/2” 13 mm

39” (1 m) White Track w/12” Power Feed, End Cap

Required for adjustable lighted shelving applications (one per light fixture). **Select “BL” for black adaptor or “WH” for white adaptor

Extension Cord

1.5” (38 mm)

E-L

ro • d

L-MAG-TR-1M-WH-1

Straight power feed and end cap are included with each track/power strip. Purchase additional power feeds and end caps for each cut of track that is separately powered.

3/8 in. 10 mm

Magnet Adaptor

ru ilo

39” (1 m) Chrome Track w/12” Power Feed, End Cap

COMPON ENTS

1-7/16 in. 37 mm

01-

L-MAG-TR-1M-CH-1

12VDC

For details see Power Supplies on Page 141.

Straight Power Feed w/End Cap

roC

Description

Each track is packaged with a straight power feed and end cap.

Power Supplie s

Power Supplies

Part #

3/4 in. 19 mm 15/16 in.

Some lights come with magnets attached already, for others use VHB tape to attach magnets. 6.0” 12.0” 23.6” 47.2” 70.8”

1-800-227-1171 | trescolighting.com

6/20/19 5:33 PM

12VDC SPECIAL SERIES

Stax 25Â°

70 Lumens TrescoBook_2019.indd 125

6/20/19 5:33 PM

Stax

Creating a custom jewelry, museum or glass case light system has never been easier than with the Stax vertical spotlight series. Light modules and spacers snap together in seconds according to your desired configuration. Once installed, twist and pivot the modules and spotlights to aim the light exactly where needed. Build it short or stack it tall, Stax is sure to turn the ordinary into extraordinary.

Light & blank modules to fit your needs

Customizable system allows easy addition/removal

Typical Applications:

Features: High output and highly efficient at just 1.5W per LED light module Modules and LED lights can be twisted & positioned to almost any angle desired 360º horizontal and 60º vertical movement

Showcases Displays Museum cases Jewelry cases

Stackable up to 18” (457 mm) Commercial grade 3-year warranty

Available Finishes:

Black (BL)

126

TrescoBook_2019.indd 126

Nickel NI)

1-800-227-1171 | trescolighting.com

6/20/19 5:33 PM

Stax

Specifications:

Dimensions: Actual Size 15/16” (24 mm)

Wattage

1.5W per LED light module

Lumens

70 per LED light module

End Cap

9/16” (14 mm)

Efficacy (lm/W)

Light Unit

46.7

Input Voltage

12VDC

Diode Life

30,000 Hour

2-1/8” (54 mm)

Max Per 60W Power Supply

40 light modules

Max Continuous Run

N/A

Mounting

Surface

Warranty

3 Year

Spacer Unit

Certifications

2-1/8” (54 mm)

Beam Angle

25°

79” (2 m)

Color Temperature Warm White

Base Unit 1-3/8” (35 mm)

2700K

Warm to Neutral

3000K

Warm (3000K)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 127

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

127

6/20/19 5:33 PM

Stax LED Lights • L -STX

082814

15/16" (24mm) End Cap

Stax

9/16" (14mm)

All product dimensions and specifications are subject to change without prior notice.

Stax LED Lights • L -STX

082814 082814 1-7/8"

Light Unit

Required Items

15/16" 15/16" (24mm) (24mm)

2-1/8"

Stax Starter Kit (54mm)

(46mm)

Part # End Cap Cap End

9/16" 9/16" (14mm) (14mm) Light Unit Unit Light

Description

L-STX-SKIT-WBL-1

Stax Starter Kit, 3000K Black

L-STX-SKIT-WNI-1

Stax Starter Kit, 3000K Nickel

60°

L-STX-SKIT-CBL-1 360°

Stax Starter Kit, 5000K Black

L-STX-SKIT-CNI-1 (46mm) (46mm)

Stax Starter Kit, 5000K Nickel

1-7/8" 1-7/8"

Spacer Unit

Starter kit includes (1) end cap, (1) light unit module, (1) base unit. Maximum height of 18” (457 mm) or 9 blank/light modules.

2-1/8" 2-1/8" 2-1/8" (54mm) (54mm) (54mm) Base Trim

60° 60°

Stax LED Lights • L -STX

1-3/8" (35mm)

082814

Spacer Unit Unit Spacer

2-1/8" 2-1/8" (54mm) (54mm)

15/16" (24mm)

1-5/8" (41mm)

9/16" (14mm)

Stax LED • L -STX StaxLights Light Module

082814

End Cap

Base Trim Trim Base

Light Unit

15/16" (24mm)

Base Unit Unit Base

End Cap

Part #

(35mm) (35mm)

L-STX-LITE-WBL-1

1-7/8"

End Cap

1-5/8" (46mm) 9/16" 1-5/8" (14mm)(41mm) (41mm) 2-1/8" (54mm)

Stax Blank Module

60°

Part #

Spacer Unit

Base Unit

2-1/8" (54mm)

1-3/8" Starter Cord (35mm)

Base Trim

79” (2m)

1-5/8" (41mm) Base Unit

Power Supplies 1-3/8" (35mm)

12VDC

COMPONEN TS

Power Supplie s

1-5/8" (41mm)

Stax 1.5W Light Module, 5000K Nickel

360°

Spacer Unit

1-3/8" (35mm)

Stax 1.5W Light Module, 5000K Black

1-7/8" (46mm)

60°

Base Trim

Base Unit

60°

Maximum height of 18” (457 mm) or 9 blank/light modules. 360° Light Unit

2-1/8" 2-1/8" (54mm) (54mm)

Stax 1.5W Light Module, 3000K Nickel

L-STX-LITE-CNI-1

Spacer Unit

Base Trim

Stax 1.5W Light Module, 3000K Black

L-STX-LITE-CBL-1

15/16" (24mm)

Light Unit

2-1/8" (54mm)

Description

1-7/8" (46mm)

Starter Cord Cord Starter 79” (2m) (2m) 79”

L-STX-LITE-WNI-1 Stax LED Lights • L -STX 082814

2-1/8" 1-3/8" (54mm) 1-3/8"

9/16" (14mm)

360° 360°

Starter Cord 79” (2m)

Base Unit

1-5/8" (41mm)

For details see Power Supplies on Page 141.

360°

Starter Cord 79” (2m)

Description

L-STX-BLNK-BL-1

Stax Blank Module Black

L-STX-BLNK-NI-1

Stax Blank Module Nickel

Maximum height of 18” (457 mm) or 9 blank/light modules.

Starter Cord 79” (2m)

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

128

TrescoBook_2019.indd 128

1-800-227-1171 | trescolighting.com

6/20/19 5:34 PM

12VDC SPECIAL SERIES

Ascent 20Â°

41 Lumens 129 TrescoBook_2019.indd 129

6/20/19 5:34 PM

Ascent

Let ASCENT guide the way. Designed with the hotel industry in mind, it easily mounts to bed frames, nightstands, armoires and more. The featured time-adjustable PIR sensor illuminates for up to five minutes ensuring plenty of time to move about safely.

Shown with 90° Mounting bracket

Motion sensor time adjustment dial

Available in multiple finishes

Features:

Typical Applications:

Integrated motion sensor

Under the bed

Adjustable motion sensor operating time (30 seconds

Interior cabinets

- 5 minutes)

Night stands

2 mounting brackets included (90° and 116°) Commercial grade 3-year warranty

Closets Armoires

Available Finishes:

Nickel (NI)

130

TrescoBook_2019.indd 130

1-800-227-1171 | trescolighting.com

6/20/19 5:34 PM

Ascent

Specifications:

Dimensions: Actual Size

Front

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Side

12 VDC

Diode Life 5/8” (16 mm)

20,000 Hours

Max Per 60W Power Supply

60 Fixtures

Mounting

Surface

Warranty

3 Year

Motion Detection Range

79'' (2m)

Motion Detection Angle

110°

“On” Time

30 Seconds - 5 Minutes (adjustable)

8” (209 mm

Certifications

Beam Angle

20° Photometric Data

Height

Light Output

Beam Area

1ft

164.6Fc

.3ft L x .3ft W

3ft

18.29Fc (196.8lx)

(.3 m L x .3 m W)

6ft

4.57Fc

2ft L x 2ft W

(.3 m)

79” (2 m)

(.9 m) (1.8 m)

(1777.7lx)

(.09 m L x .09 m W)

1ft L x 1ft W

(49.1lx)

(.6 m L x .6 m W) L-HACNT-WNI Tested

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Warm (3000K) 53/64” (21 mm)

4500K

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Underwriters Laboratory

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 131

Cool White

131

6/20/19 5:34 PM

.8 in 21mm

8.25 in 210mm

Ascent

All product dimensions and specifications are subject to change without prior notice.

Required Items Ascent

Part #

Description

L-HACNT-WNI-1

12VDC 1W Ascent, 3000K, Nickel

L-HACNT-CNI-1

LED Accent

061915

12VDC 1 W Ascent, 5000K, Nickel .8 in 21mm

LED Accent

061915

20,000 useful life hours. Ascent lights are not dimmable. Includes starter cord 79” (2 m) and AMP connector with each light.

8.25 in 210mm

.8 in 21mm

8.25 in 210mm

79 in, 2m

.65 in 16.5 mm

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141.

.65 in 16.5 mm

Part #

Description

L-DC-ELT12-CON-1

16.5 mm 12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

.65 in

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

132

TrescoBook_2019.indd 132

1-800-227-1171 | trescolighting.com

6/20/19 5:34 PM

12VDC SPECIAL SERIES

Reach 90Â°

125 Lumens 133 TrescoBook_2019.indd 133

6/20/19 5:34 PM

Reach

REACH full design potential with this one of a kind fixture. Designed to run the depth of a cabinet, it provides all the illumination of a puck and slim look of a linear in one beautiful fixture. With easy to manage wiring, and contemporary appearance, it is truly a light for those looking to make a statement.

Recess or surface mount

Surface mounting case acts as wire channel

Features:

Typical Applications:

Fixture stretches from the back wall towards the

Cabinets

front, with a beam spread similar to a puck light

Shelves

Recess or surface mountable (surface mounting case included) Commercial grade 3-year warranty

Furniture Displays

Available Finishes:

Nickel (NI)

134

TrescoBook_2019.indd 134

Black (BL)

1-800-227-1171 | trescolighting.com

6/20/19 5:35 PM

Reach

Specifications:

Dimensions: Actual Size

Front

Side 15/32” (12 mm) (Surface Mount Height)

Wattage

Lumens

125

Efficacy (lm/W)

62.5

Input Voltage

12 VDC

Diode Life

13/32” (11 mm) (Recessed Depth)

30,000 Hours

Max Per 60W Power Supply

Mounting

Recess/Surface

Warranty

3 Year

Certifications 8-21/32” (220 mm)

Beam Angle

90° Photometric Data

Height

Light Output

Beam Area

1ft

61.80Fc

2.3ft L x 1.6ft W

3ft

6.87Fc (73.9lx)

(2.1m L x 1.4 m W)

6ft

1.72Fc

14.1ft L x 9.6ft W

(.3 m) (.9 m) (1.8 m)

(.7 m L x ..48m W)

(665.2lx)

7ft L x 4.8ft W

(18.5lx)

(4.2m L x 2.9m W)

L-HREACH-CNI Tested

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Warm (3000K)

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Underwriters Laboratory 5/8” (16 mm) 79” (2 m)

TrescoBook_2019.indd 135

1-800-227-1171 | trescolighting.com

135

6/20/19 5:35 PM

in 8.6 mm 220

.4 in 11.5 mm

Reach

All product dimensions and specifications are subject to change without prior notice.

Required Items Reach

Part #

Description

L-HREACH-WNI-1

LED R each 12VDC 2W Reach light, 3000K, Nickel

L-HREACH-CNI-1

12VDC 2W Reach light, 5000K, Nickel

L-HREACH-WBL-1

12VDC 2W Reach light, 3000K, Black

L-HREACH-CBL-1

12VDC 2W Reach light, 5000K, Black

061915 8.6 in 220mm

30,000 useful life hours. Routing Dimension: 8-5/8” (219 mm) L x 5/8” (16 mm) W x 13/32” (12 mm) D. Includes starter cord 79” (2 m) and AMP connector with each light.

13/32 in 11 mm

5/8 in 16 mm

LED R each

in 8.6 mm 220

061915

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141. in 8.6 mm 220

.4 in 11.5 mm

79 in. 2m

.4 in 11.5 mm

8.6 in 220mm

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

13/32 in 11 mm

5/8 in 16 mm

13/32 in 11 mm

5/8 in 16 mm

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

136

TrescoBook_2019.indd 136

1-800-227-1171 | trescolighting.com

6/20/19 5:35 PM

12VDC SPECIAL SERIES

Eclipse 100Â°

42 Lumens 137 TrescoBook_2019.indd 137

6/20/19 5:35 PM

Eclipse

Add decorative brilliance to glass shelving with this accent light. Slip ECLIPSE on to instantly mesmerize with an artful mixture of light and shadows.

Fits 8 mm or 6 mm glass shelves (not to be used as support)

Available in multiple finishes

Features: â&#x20AC;&#x153;Clipsâ&#x20AC;? on to 6 or 8 mm glass shelves

Typical Applications: Glass shelving

(spacer included) Highly efficient at just 1W Cone of light emits from top and bottom Wire exits back of fixture Commercial grade 3-year warranty

Available Finishes:

Nickel (NI)

138

TrescoBook_2019.indd 138

1-800-227-1171 | trescolighting.com

6/20/19 5:35 PM

Eclipse

Specifications:

Dimensions: Actual Size

Front

Wattage

Lumens

Efficacy (lm/W)

1-21/64” (34 mm)

Input Voltage

1-37/64” (40 mm)

12 VDC

Diode Life

20,000 Hours

Max Per 60W Power Supply

79” (2 m)

60 Fixtures

Mounting

Surface (Not to be used as shelf support)

Warranty

3 Year

Certifications

Beam Angle

100° Side 5/16” (8 mm)

100°

Color Temperature Warm White

2700K

63/64” (25 mm)

Warm to Neutral

3000K

Warm (3000K)

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Underwriters Laboratory

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 139

139

6/20/19 5:35 PM

1.5 in 40mm

Eclipse

All product dimensions and specifications are subject to change without prior notice.

Required Items Eclipse

Eclipse •

Part #

Description

061915

L-HECPS-WNI-1

12VDC 1W Eclipse, 3000K, Nickel

L-HECPS-CNI-1

12VDC 1W Eclipse, 5000K, Nickel

30,000 useful life hours. Includes starter cord 79” (2 m) and AMP connector with each light. 1.5 in 40mm

.3 in 8mm

.9 in 25 mm

1.3 in 34mm

12VDC

COMPONEN TS

Power Supplie s

Power Supplies

For details see Power Supplies on Page 141. .3 in 8mm

Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

.9 in

1.3 in 34mm

25 mm L-DCE20D-CON-1†

12VDC 20W Dimmable LED Power Supply

L-DCE60D-CON-1†

12VDC 60W Dimmable LED Power Supply

12V COMPONENTS: POWER SUPPLIES, CONTROLLERS & MORE SEE PAGE 141.

140

TrescoBook_2019.indd 140

1-800-227-1171 | trescolighting.com

6/20/19 5:36 PM

12VDC COMPONENTS

Power Supplies 141

TrescoBook_2019.indd 141

6/20/19 5:36 PM

Power Supplies

Commercial Grade Power Supplies I

12V DC power supply is equipped with a mounting block that allows for easy snap-in connections and includes a standard 110/120V cord and plug. u042310

Mounting Block Mounting Block Mounting Block

Worldwide use 100V-240V

Hole Size, if Needed: 5/8 in. 16 mm

Size, if Needed: Hole Size, ifHole Needed:

5/8 in. 5/8 in. 16 mm 16 mm

Other cord sets available upon request. UK

6 ft. 1.8 m

Indicator Light

6 ft. 1.8 m

Hole Size, if Needed: 1/2 in. 13 mm

Size, if Needed: Hole Size, ifHole Needed:

1/2 in. 1/2 in. 13 mm 13 mm 6 in. 6 in. 152 mm 152 mm 3-5/16 in. 3-5/16 in.3-5/16 in. 6 in. 84 mm 84 mm 84 mm 6 in. 152 mm 152 mm

60W

18W

6 in. 152 mm

6 in. 6 in. 152 mm152 mm Mounting Block

4-1/4 in. 4-1/4 in. 107 mm 107 mm

One mounting block included. Add mounting blocks

4-11/32 in. 4.5 in. 110 mm 114 mm u042310 114 mm 4-1/2 in.

Hole Size, if Needed:

5/8 in. 16 mm Mounting Block

to utilize the full capacity of the power supply. Hole Size, if Needed: 5/8 in.

Features:

1-1/4 in. 1-1/4 in. 161-1/16 mm in. 31.2 mm 31.2 mm 27 mm

1-1/16 in.1-1/16 in. 27 mm 27 mm

Short circuit protection*

2-3/32 in. Mounting Block 53 mm 3/4 in.

1-11/16 in. 1-11/16 in. 43 mm 3/4 in. 3/4 in. 43 mm 19 mm 19 mm 6 ft.

12V DC output, constant voltage Overcurrent protection

Cord

Overload protection*

19 mm

5/8 in. 16 mm

3-5/16 in. 84 mm

6 ft. 1.8 m

Class 2 or LPS

6 in. 152 mm

1/2 in. 13 mm

3/4 in. 19 mm

6 in. 152 mm

Description

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-TRANS-MNT-BL-1

Extra 6-Snap Mounting Block 1-1/16 in. 27 mm

L-DCT-EUPKT-BL-1

72â&#x20AC;? (1.8 m ) EU Power Cord, Black

L-DCT-UKPKT-BL-1

72â&#x20AC;? (1.8 m ) UK Power Cord, Black

* No resistor necessary - works with all Tresco 12VDC LED fixtures. 1-1/16 in. 27 mm 1-800-227-1171 | trescolighting.com 3/4 in. 19 mm

3-3/4 in. 95 mm

1 in. 25 mm

1-5/8 in. 41 mm

4.5 in. 114 mm

3-5/16 in. 84 mm

Part #

3/4 in. Dimmable on trailing edge (12V side). Mounting block and power cord are 19included. mm Power supply specifications are subject to change.

TrescoBook_2019.indd 142

1/2 in. 13 mm

6 in. 152 mm

1-1/16 in. 27 mm

Hole Size, if Needed:

Universal System allows you to mix all 12V lights

142

6 in. 152 mm Indicator Light 3-5/16 in. 84 mm

Hole Size, if Needed: 1/2 in. 13 mm

6 in. 152 mm

50,000 hour life supply Dimmable on trailing edge (12V side)

Hole Size, if Needed:

Mounting Block

1.8 m

Hole Size, if Needed:

RFI protection

* Automatic reset (no fuses) All parts included with purchase of power supply.

1-5/32 in. 29.5 mm

6 ft. 1.8 m

6 in. 152 mm

3-3/4 in. 95 mm 2 in. 51 mm

1-1/4 in. 32 mm

1 in. 25 mm 1-5/8 in. 41 mm 6/20/19 5:36 PM

Power Supplies

12W 1-9/16 in. 40 mm

5 ft. 1.5 m

Mounting Block

Features:

6 in. 152 mm

www.trescolighting.com

Short circuit protection* 12V DC output, constant voltage

3/4 in. 21 mm

Overload protection*

3-3/8 in. 85 mm

Dimmable on trailing edge (12V side) 6 in. www.trescolighting.com 152 mm

Class 2

KVF-12060-TDW/ DCE60D-CON

3-5/16 in. 84 mm

* Automatic reset (no fuses) All parts included with purchase of power supply. * No resistor necessary - works with all Tresco 12VDC LED fixtures. Part #

Description

L-DC-ELT12-CON-1

12W 12VDC Power Supply w/6 Snap Mounting Block

Installation Instructions Hardwire LED Power Supplies

Hardwire 12V DC LED Power Supply Power Supply Wall Dimmable Hardwire Part Nos.:

LED 12VDC Power Supply (12W) LED 12VDC Power Supply (50W)

.......... L -DCE12D-CON . . . . . . . . . . L -DCE50D-CON

For best operation, use LED-compatible wall dimmers.

• Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.

Read all instructions before installing system.

• Use only LED-compatible Wall Dimme rs with LED Power Supplies. For 7” best operation, use a Dimmer w (178 ithmm) an adjustable low-end dial such as the Lutron ® C . L Series: L-CTCL-153P-WH or L-DVCL-153P-WH.

Before beginning installation, be sure power is turned OFF to the power supply and light system. • Th e 1 2W Power Supply operates on line voltage Th e 50W Power Supply operates on line voltage

If you are unsure of dimmer compatibility, call 1

120 VAC. 100-240 VAC.

Warning:

Th e Power Supply is to be mounted and wired in accordance (NEC) . The Power Supply must be installed in a well-ventilated area free from explosive gases and vapors. Failure to install th e Power Supply and light fixture in L-DCE60D-CON-1 compliance with applicable codes and regulations may cause serious personal injury, death and/or major property damage.

Article 450 of the National Electric Code Electronic units are lower profile and generatewithless

heat than magnetic transformers Quiet operation (no humming)

• The hardwired installation of the Power Supply performed by a qualified electrician . • Do not conceal

should only be 7”

(53 mm)

2-13/32” (61 mm)

• Do not attempt to ground this unit. It is double-insulated.

15/16” mm) • I f any modification (24 is made to the Power Supply warranty and may render the product unsafe.

2”

a licensed electrician. This requirement does not apply to the wiring between the Power Supply and the cabinet light system . Line Voltage Input Cord

Do not add a plug-in to input wires and attempt to dim a receptacle. 6-11/16” (170effects mm) (such as flickering), is This can cause unwanted lighting dangerous, and against NEC in certain applications.

• Not intended to be used in damp locations or outdoor areas.

(178 mm)

the line voltage input cord or Power Supply inside a

, it will invalidate the

6-11/16” (170 mm)

Neutral (white wire) Ground (green wire)

OUTPUT 12 VDC

Line (black wire)

LED Power Supply 1

12VDC+

No minimum load requirements

-800-277-1711.

r on the input (line voltage) side of the Power

• This unit can be mounted in any orientation, horizontal or vertical.

Works with all Tresco 12VDC dimmable LED fixtures* wall, ceiling, soffit, or similar permanent structure, unless consulting One 6-snap mounting block included

• Only install the Wall Dimme Supply .

2”

Available in 20W, & 60W models

• Use only insulated staples or plastic ties to secure ALL loose cords.

CAUTION: To reduce the risk of fire, electric shock, or injury to persons:

(53 mm)

Dimmable by standard LED wall dimmers

IMPORTANT SAFETY INSTRUCTIONS

2-13/32” (61 mm)

Features:

Class 2 • Dimmable 12W & 50W 12VDC

2W • L-DCE12D-CON

LED P ower Supply 50W •

Class 2 with short circuit and automatic reset

010816

L-DCE50D-CON

010816

Mounting Block INPUT

LED Wall Dimmer

Part #

Description

L-DCE20D-CON-1

12VDC 20W Dimmable LED Power Supply

of Power Supply

L-DCE12D-CON

Specifications 12VDC 60W Dimmable LEDTechnical Power Supply L- DCE12D-CON

L- DCE50D-CON

Input Voltage Range

120 V AC

10 0-240 VAC

AC F LED requency Wall Dimmer

50-60Hz

Input(Optional) Current 0.18A max 0.58A max Dimmable by traditional line voltage (120V) wall dimmers. Mounting block Output Modeincluded. Requires Constant voltage voltage Dimmable by LED compatible line voltage (120V) wall dimmers. Mounting block electricianConstant to install.

Power Supply 12VDC Output Cur rent 1.0 A

4.16 A

On L oad Voltage

12V

No L oad Voltage

12V

Mounting Block

LED DC Power Supply (20W) L-DCE20D-CON 1-5/16 in. 33 mm

Dimensions

121 x 44 x 25 mm (4 -3/4 x 1 -3/4 x 1")

138 x 73 x 33 mm (5 -7/16 x 2 -7/8 x 1 -5/16 ")

Minimum Load

No minimum required

War ranty

3 years

•

>80%

6 ft . 1. 8 m

5-7/16 in. 138 mm

2-7/8 in. 73 mm

Tresco Lighting by Rev-A-Shelf

1-800-227-1171 | trescolighting.com

1240 0 Earl Jones Way Louisville, KY 40299

---------------------------------------------------------------------------

Tel:

Note: Mounting Block and Line Voltage Input Cord are included with each Power Supply.

TrescoBook_2019.indd 143

OUTPUT >

2/3

* No resistor necessary - works with all Tresco 12VDC dimmable Weight LED fixtures. 175g (6.2 oz) 340g (12.0 oz) Address: 12400 Earl Jones Way, Louisville, KY, 40299 -------------------------------------------------------------------------------------------------------------------------------

2/3 6 in.

Address: 12400 Earl Jones Way, Louisville, KY, 15240299 mm

OUTPUT

Efficiency

L-DCE20D-CON-1

•

INPUT

INPUT >

1-3/4 in. 44 mm

• –

• +

Compatible Tresco Wall 50W max 12W max Dimmers>0.90 on next page. >0.90 • –

Power F actor

4-3/4 in. 121 mm

6 ft. 1. 8 m

• +

Output Power

1 in. 25 mm

• +

Part No.

Hardwire Box

6 in. 152 mm

LED DC Power Supply (12W)

• –

L-DCE60D-CON-1

15/16” Install Wall Dimmer on (24 mm) input (line voltage) side

LED Power Supply 12 VDC

Fax:

143

800-227 -1171

502-491-221 5

Email: cservice@trescolighting.com Web: www .trescolighting.com 6/20/19

Save these instructions for future reference. For technical assistance, call 1-800-227-1171 I-DCE-0116

5:36 PM

Power Supplies

All product dimensions and specifications are subject to change without prior notice.

Lutron Diva® C•L™ Dimmer

120V LED Wall Dimmers

Lutron Skylark Contour C•L™ Dimmer

Lutron Diva® C•L™ Dimmer Large paddle switch with a captive linear-slide dimmer for a standard designer wallplate opening Preset dimmer Offers more reliable dimming performance over standard dimmers HED™ technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs Low-end adjustment dial

Compatible with Tresco 12VDC Wall Dimmable Power Supplies (previous page)

Lutron Skylark Contour C•L™ Dimmer

On/off rocker switch with a captive linear-slide dimmer for a standard designer wallplate opening Switch returns light to preset light level Offers more reliable dimming performance over standard dimmers HED™ technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs Low-end adjustment dial

Part #

Description

L-DVCL-153P-WH-1

Lutron Diva® C•L™ Dimmer w/out plate

L-CTCL-153P-WH-1

Lutron Skylark Contour C•L™ Dimmer w/out plate

EquiLine Power Supplies 15W

6W 1-1/4 in. 32 mm

1-1/2 in. 38 mm

1-5/8 in. wide 41 mm wide

1-1/2 in. wide 38 mm wide

3 in. 76 mm

2 -3/4 in. 70 mm

3-5/16 in. 84 mm

1-11/16 in. 43 mm

10’

Features: Short circuit protection*

Part #

Description

12V DC output, constant voltage

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

Overload protection* Dimmable on trailing edge (12V side) Class 2 or LPS

Mounting block and power cord are included with each power supply. Dimmable on trailing edge (12V side).

* Automatic reset (no fuses)

144

TrescoBook_2019.indd 144

1-800-227-1171 | trescolighting.com

6/20/19 5:36 PM

12VDC COMPONENTS

Controllers 145

TrescoBook_2019.indd 145

6/20/19 5:36 PM

Controllers

FREEDiM SERIES WIRELESS CONTROLLERS FREEDiM Series Universal Receiver 60W Capacity Power failure memory Multiple receivers can be used on a single power supply or within a room to achieve multiple zones of control Speciﬁcations: InstallRemote inlineSpeciﬁcations: between power supply Receiver and lights. P/N: L-WLD-3RMT-BL Operating Voltage: 3V CR2032 Working Frequency: MHz Compatible with all915four RF Remote Distance: 20 m (65 ft.)

FREEDiM Series controllers

P/N: L-WLD-1REC Input Voltage: 12VDC Output Voltage: 12V DC Max-Output Load: 5A, 60W Dimming Range: 100% - 1%

2-Zone Remo InstallationFreeDim Instructions FREEDiM 3-Zone Remote Dimmer

READ ALL INSTRUCTIONS BEFORE INSTALLING SYSTEM. Before beginning installation, be sure power is turned OFF to light system. PROGRAMMING

Perform this exercise BEFORE permanently installing your system

1. Disconnect Mounting Block from 12V DC Tresco power supply. Connect Receiver to Tresco power supply by locating the input wire to the receiver and snapping the male AMP connector to female AMP connector located on output wire of the power supply (See Figure 2). To use multiple receivers on one power supply, connect the input wire of the to141) the power supply output and then plug the receivers into the Deco WallMounting DimmersBlock (page 12VDC LED Fixture Mounting Block.

For video visit:

trescolighting.com/videos 12VDC 60W Capacity

Indicator Light

Figure 1 All lights: ON/UP

All lights: OFF/DOWN

Zone 1: ON/UP

Zone 1: OFF/DOWN

Zone 2: ON/UP

Zone 2: OFF/DOWN

Zone 2: ON/UP

5 150mm

2. Remove the plastic pull-tab from the battery compartment on the back of the remote.

Zone 3: OFF/DOWN Mounting Block S1

3 97mm

Hold to save the scene, click to call up the saved

3. Plug desired 12V DC LED lights into the Mounting Block(s). 4. Plug polarized 2-prong end of Tresco 12V DC power supply wire into 120V receptacle. If receptacle is operated by on/off switch, turn switch on after plugging power supply in. 5. Power on the 3-Zone Remote Dimmer. Universal FREEDiM Series 6. In order for each Receiver to know what Zone it belongs to, you will need toReceiver L-WLD-1REC-1 “pair” (page it to the zone you wish to use: press (do not hold) the Learning Key on the Mirco Dimmers 143) Figure 2 Receiver, then immediately press (do not hold) the | (On) or O (Off) button of the corresponding Zone (#’s 1-3) you wish to use (See Figure 1). Connected LED lights will blink confirming successful programming.

1 ” 39mm Power Supply

7. Repeat step 6 with any additional Receivers or Remotes that you want programmed. Each Receiver can be controlled by up to 8 different Remotes. Each Zone can be programmed to an unlimited amount of Receivers.

” 16mm

Dimmer Receiver

Universal 12VDC Power Supply

Female AMP® Connector

Figure 3

Male AMP® Connector

tW ire

3 & 6 Zone Remotes (page 144) SETTING A SCENE Set all Zones to the desired light level. Hold down the desired Scene Save Button (#’s S1 - S6) until the lights flash, confirming the Scene has been saved.

1 ½” 13mm

Mounting Block

CLEARING A RECEIVER MEMORY With Remote/Lights turned On, hold down the Learning Button on the Receiver until the lights flash, confirming the Receiver memory has been cleared.

1 ” 35mm

1 ½” 13mm

O ut

W ire

CAUTION: To reduce the risk of ﬁre, electric shock, or injury to persons:

Inp

• Route and secure cords so they will not be pinched or damaged when the cabinet is pushed to the Part # wall.

4” (102 mm)

IMPORTANT SAFETY INSTRUCTIONS

Description

WLDIM-1REC

• Use only insulated staples or plastic ties to secure ALL loose cords.

L-WLD-1REC-1 12VDC 60W Universal FREEDiM Series Receiver • 12VDC Class 2 or LPS power supply only A single can be5AMP programmed • Maxreceiver 60W 12VDC output to up to 8 different FREEDiM Series remotes/dimmers

7/8” (22 mm) 3-1/4” (82.5 mm)

• Use only in dry locations. Not for use where exposed to the weather • Not intended for recessed installation in ceilings or soffits • A licensed electrician should be consulted for wiring through ceilings, soffits, or walls

1-3/8” (35 mm)

Learning Key

• All wiring must follow NEC regulations.

1-800-227-1171 | trescolighting.com

146

Save these instructions for future reference For technical assistance: 1-800-227-1171 TrescoBook_2019.indd 146

Tresco Lighting by Rev-A-Shelf 12400 Earl Jones Way Louisville, KY 40299 Tel: 800-227-1171 Fax: 502-491-2215

6/20/19 5:37 PM

Controllers

PATENT NO. 9,818,559 B2

FREEDiM Series Deco Wall Dimmer Available in single and 2-zone Can be programmed to multiple receivers for more lighting control Black, white, or light almond finish Fits Decora® style wall plates 65 ft. range of control from dimmer to receiver Controls all Tresco dimmable low voltage lights Unlike traditional hardwire dimmers, you can control the same set of lights from multiple Deco Wall Dimmers

Battery Compartment (CR1625/1620)

Also available in 2-Zone: Easily remove switch from docking tray to replace batteries or use as a remote dimmer

FreeDim Wall Dimmer Can be mounted to standard wall electrical boxes or to drywall FREEDiM Series Deco Wall Dimmer - Single Zone Part #

Description

L-WLD-1WAL-**-1

FREEDiM Series Deco Wall Dimmer

**Insert BL for Black, WH for White, LA for Light Almond

FREEDiM Series Deco Wall Dimmer -Two Zone Part #

Description

L-WLD-2WAL-**-1

FREEDiM Series 2 Zone Deco Wall Dimmer

4” 103mm

2 7/16” 61mm

**Insert BL for Black, WH for White, LA for Light Almond A single dimmer can be programmed to up to 10 different receivers.

Must have at least one receiver (WLD-1REC-1) to operate

1” 27mm 9/16” 13mm

Universal FREEDiM Series Receiver Part #

Description

L-WLD-1REC-1

12VDC 60W Universal FREEDiM Series Receiver

1 5/16” 33mm 9/16” 13mm

A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 147

147

6/20/19 5:37 PM

Controllers

FREEDiM SERIES WIRELESS CONTROLLERS FREEDiM Series Micro Dimmer Single zone wireless dimmer Black or nickel finish Easy to replace, long life lithium battery 65 ft. range of control from dimmer to receiver Controls all Tresco dimmable low voltage lights

Integrated magnet allows for mounting to refrigerator or other metallic surfaces

Integrated Magnet

Battery Compartment (CR2025)

5/8” (19 mm) 5/8” (19 mm)

1-1/2” (38 mm) Easy 2 screw installation Part #

Description

L-WLD-1RND-BL-1

FREEDiM Series Micro Dimmer, Black

L-WLD-1RND-NI-1

FREEDiM Series Micro Dimmer, Nickel

1-1/2” (38 mm)

A single dimmer can be programmed to up to 10 different receivers.

Must have at least one receiver (WLD-1REC-1) to operate Universal FREEDiM Series Receiver Part #

Description

L-WLD-1REC-1

Universal FREEDiM Series Receiver

A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers

148

TrescoBook_2019.indd 148

1-800-227-1171 | trescolighting.com

6/20/19 5:37 PM

Controllers

FREEDiM Series 3 & 6 Zone Remotes Independent control of 3 or 6 lighting zones (respectively) from single remote Program additional receivers to separate the lighting in a room into multiple zones that you can control independently Set brightness levels of all of the zones to a desired level then save as a “scene” 65 ft. range of control from remote to receiver Controls all Tresco dimmable low voltage lights

Integrated magnet allows for mounting to refrigerator or

FREEDiM 3-ZoneFreeDim Remote6-Zone Remote

other metallic surfaces

3-Zone (CR2032)

3-Zone

5 150mm

6-Zone

3 5 ½” 140mm 97mm

Docking tray can be screw mounted. Remotes attach to tray magnetically Part #

Description

L-WLD-3RMT-BL-1

FREEDiM Series 3-Zone remote, Black

L-WLD-6RMT-BL-1

FREEDiM Series 6-Zone Remote, Black

”

39mm

6-Zone batteries not included

Must have at least one receiver (WLD-1REC-1) to operate

6-Zone (3 X AAA)

½” 13mm

1 ” 48mm

” 16mm

3 97mm

1 ” ” 35mm 17mm 1 ” 17mm

” 16mm

1 ” 35mm

” 16mm

Universal FREEDiM Series Receiver Part # Description L-WLD-1REC-1

Universal FREEDiM Series Receiver

A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 149

149

6/20/19 5:38 PM

Controllers

12VDC Oval Controllers

Proximity Controller

Door Sensor Controller

Max wattage: 27W Sensor range: 2” (50 mm) Cable input: 79” (2 m) Cable output: 6” (152 mm) Finish: Nickel/Black

Max wattage: 60W Sensor range: 1/4” - 2” (6 mm - 50 mm) Cable input: 79” (2 m) Cable output: 6” (152 mm) Finish: Nickel/Black

Swipe hand across to turn on/off

Door open, light on; door closed, light off

Motion Controller

Turns on when human motion is detected

NOW 60W

Dimmer Controller

Touch on/off and 0-100% dimming control

Max wattage: 27W Sensor range: 0-5’ (1500 mm) Viewing degree: 100º Time on: 30 secs if no motion Cable input: 79” (2 m) Cable output: 6” (152 mm) Finish: Nickel/Black

17/

32 17/

ia n. d

in.

/8 i

-3 m2

61m

17/

32 17/

ia n. d

NOW 60W

Max wattage: 60W Cable input: 79” (2 m) Cable output: 6” (152 mm) Finish: Nickel/Black * Hold finger down for dimming

ia n. d

61m

/8 i

-3 m2

in.

NOW 60W

17/

Part #

Description

L-LED-OVLTD-**

60W 12VDC Oval Recess/Surface Mnt. Touch Dimmer

L-LED-OVLDS-**

60W 12VDC Oval Recess/Surface Mnt. Door Sensor

. L-LED-OVLMS-** dia in.

. 60W 12VDC Oval Recess/Surface Mnt. Motion Sensor dia in.

in. L-LED-OVLPS-** . 3/8

ia n. d

32 17/

61m L-DB1732-1 .

17/

7/3

1 in. 27W 12VDC Oval Recess/Surface Mnt. Proximity Sensor 3/8

ia n. d

in.

61m (13.5 mm) Drill Bit for Recess Mount 17/32”

n . . 8 /8 Proximity /8 i . dia. /8 dia dia -3/ 2-3 2-3 2-3 in. inMotion Controller in. Dimmer Controller Controller mm 2 Door Controller 32 Sensor Controller 32 mm Proximity mm 7/32 mm / / 1 1 1 1 7 7 6 6 6 6 **Available in Black (BL) andon/off Nickel 1Door Open - lightinon; 1 1 Turns on when Touch and (NI) . . . a. a. Swipe a. hand across in. human . di . di . di 8 in 8 8 8 in / / / / n n n i i i motion is detected 0-100% dimming control 3 3 3 3 Door Closed - - light off 2 2 2 to turn on/off Door 2 2 2 2 3 3 3 Surface mount plate packaged with each controller. / / / 7 m Proximity m m Door17Sensor Controller Controller Dimmer Diameter: 13mm (17/32”) Controller Diameter: 13mm (17/32”) 1Motion 17 Controller Diameter: . mm 13mm (17/32”) Diameter: (17/32”) in. 61m in. 61m 13mm Sensor 8 in 61 /8human Turns on when Touch on/off and Length: 60 mm (2 3/8”) Length: 60 mm (2 3/8”) Open - light2on; 3 Swipe hand across2-3/8Length: 60 mmDoor -3/ Length: 60 mm (2 3/8”) (2 Controller 3/8”) 2 m m Motion ismdetected Max Wattage: 0-100% 27W dimming controlMax Wattage: 27W Door Closed1m - light off Max Wattage: 27Wmotion to turn on/off Wattage: 27W 61m 13mm 61mDoor Max 6 Motion Controller Dimmer Controller ntroller Sensor Controller Diameter: (17/32”)Sensor 13mm (17/32”)Cable input: 2.0 m (79”) range: Diameter: 0 - 1500 mm Controller Diameter: 13mm (17/32”) Sensor range: 0 - 80 mm (3 1/8”) Diameter: 13mm (17/32”) Sensor range: 0 80 mm (3 1/8”) Turns on when human Touch on/off and Door Open light on; s Length: 100º 60 mm (2 3/8”) Cable output: 152.0 mm (6”) Length: 60 mm (2 3/8”) Cable input:Dimmer 2.0 m Length: (79”) 60 mm (2 3/8”) Viewing degree: Length: 60 mmDoor 3/8”) Cable- light input: m (79”) motion is detected 0-100% dimming control Motion Controller Dimmer Controller Closed off2.0 Door Sensor (2Controller Max Wattage: 27W Max Wattage: 27W Time on: 30 secs if no motion Finish: Nickel / Black Max Wattage: 27W Cable output: 152.0 mm (6”) Controller MaxOpen Wattage: 13mm (17/32”) 13mminput: (17/32”) Turnsmm on when Touch on/off and0Diameter: Cable output: 152.0 (6”)0 - human Diameter: 13mm (17/32”) Door - light27W on; Sensor range: - 1500 mm Cable input: 2.0 m (79”) *Hold finger down for dimming Cable 2.0 m (79”) (17/32”) Sensor range: 80Diameter: mmFinish: (3 1/8”) Nickel / Black Sensor range: 0 80 mm (3 1/8”) Length: 60 mm (2 3/8”) Length: 60 mm (2 3/8”) motion is detected 0-100% dimming control Length: 60 mm Nickel (2 3/8”)/Cable Blackinput: 2.0 m (79”) Door Closed - light off Finish: Viewing degree: 100º Cable output: Cable 152.0 output: mm (6”)152.0 mm (6”) 3/8”) Cable input: 2.0Max m (79”) Max 27W Diameter: Max Wattage: 27W Diameter: 13mm 13mm (17/32”) Wattage: 27W Time on: 30 secs if no motion Finish: Nickel /Finish: Black Nickel / Black Cable output: 152.0(17/32”) mmWattage: (6”) W Diameter: 13mm (17/32”) mm input: 2.0 m (79”) *Hold finger down for dimming Cable output: (6”)0 - 80 mmFinish: Length: 60 mm (2Sensor 3/8”) range: 0 - 1500 Length: 60 mm 2.0 (2Cable 3/8”) Sensor range: (3 1/8”) Length: 60 mm (2152.0 3/8”)mm Cable input: m (79”) Nickel / Black 80 mm (3 1/8”) Cablemm output: 152.0 mm (6”) | trescolighting.com 150 Wattage: 27W Cable input: 2.0 m (79”) Max Wattage: 27WViewing degree: 100ºMaxCable Finish: Nickel27W / Black Max Wattage: output: 152.0 (6”) 1-800-227-1171 m (79”) Time mm on: 30 secs if noCable motion Sensor range: 0 - 1500 input: 2.0 m (79”) Nickel / Black Cable Sensor range: 0 - 80 mmoutput: (3 1/8”)152.0 mm (6”) Finish: Nickel / Finish: Black .0 mm (6”) Cable input: 2.0 m (79”) *Hold Viewing degree: 100º Cable output: 152.0 mmfinger (6”) down for dimming Cable input: 2.0 mFinish: (79”) Nickel / Black ck Cable output: 152.0 mm (6”) output: 152.0 mm (6”)Nickel / Black Time on: 30 secs ifCable no motion Finish: a.

. di

Finish: Nickel / Black

Cable input: 2.0 mFinish: (79”) Nickel / Black *Hold finger down for dimming Cable output: 152.0 mm (6”)

TrescoBook_2019.indd Finish: 150 Nickel / Black

6/20/19 5:38 PM

Controllers

12VDC Remote Control Dimmers Remote Control LED Dimmers feature radio-frequency, remote-control dimming to adjust lights from anywhere in the room up to 30’ (9 m). The remote control provides on/off power and dims lights from 100%-1%.

Universal Remote Dimmer Controls up to 5A/60W of LED lighting Features a built-in memory that recalls the last setting when turned on Comes with two remote controls (one as a backup)

1-5/16” (33 mm) 2-1/8” (54 mm)

No line of sight required Can control multiple dimmers in same room with single remote control for universal dimming

3-3/16” (81 mm)

1-1/8” (29 mm)

Dedicated Remote Control Dimmer

2-1/4” (57 mm)

Controls up to 5A/60W of LED lighting

ALLFeatures New bya LL 1/23/09, based on IL#9 built-in memory that recalls the last setting when Update caption to “Power Supply” for LED Spec Book 111 turned on

1-5/16” (33 mm)

No line of sight required

3-3/16” (81 mm) 2-1/8” (54 mm)

•+ •–

INPUT

two remote controls (one extra, as a backup) that are 17c.Comes Touchwith On/Off Switch TS2-72 s012309 u020209 u010811

+• –•

1-1/8” (29 mm)

OUTPUT

synchronized to control the same dimmer

2-1/4” (57 mm)

6 ft. Can use multiple independently controlled dimmer in the same room 1.8 m

2-1/8 in. 54 mm

Part #

Description

L-LED-DIMRMT-12V8A-1

LED Dedicated Remote Control Dimmer, 12VDC 96W 1.5 m LED Universal Remote Control Dimmer, 12VDC 96W

1-9/16 in. 40 mm

5 ft.

L-LED-DIMRMT-12V8A-U-1*

14 in.

*Recommended not to exceed 3 per room Placement of multiple dimmers in a room may be critical for proper function depending on set-up and obstacles.

356 mm provide on/off power and dim lights from Both models of the Remote Control LED Dimmer 100%–1%. The dedicated remote control independently one specific dimmer in a Female receptacle can accept upcontrols to (3) Power plugs (120V ea.)dimmers in a room. room. The Universal Remote ControlSupply (U) controls multiple

Touch On/Off Switch

ALL New by LL 1/23/09, based on IL#9 Update caption to “Power Supply” for LED Spec Book 111 17c. Touch On/Off Switch TS2-72

s012309 u020209 u010811

6 ft. 1.8 m

2-1/8 in. 54 mm

1-9/16 in. 40 mm

5 ft. 1.5 m 14 in. 356 mm

3-3/8 in. 85 mm

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

Controls 12V Plug-in Power Supplies

Part #

Description

L-TS2-72-1

Touch On/Off w/Cord And Touch Pad. Black, 200W

3/4 in. 21 mm

On/off switch touch pad attaches to surface with adhesive backing. Power supply plugs into on/off switch.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 151

151

6/20/19 5:38 PM

Controllers

12VDC Manual In-Line Rotary Dimmer 1-1/4”

(32 mm)

4A /48W capacity

79” (2 m)

100-0% dimming and on/off power 79” (2 m) input lead snaps into power supply mounting block with male AMP® connector 8” (203 mm) output connects to run of light with female AMP® connector Part #

Description 8”

L-LED-DIMCON-BL-1

LED Black Inline Rotary Dimmer, 12VDC 48W

L-LED-DIMCON-WH-1

LED White Inline Rotary Dimmer, 12VDC 48W

(203 mm)

5/16” (8 mm)

1-1/4”

(32 mm)

1” (25 mm)

08. Rd Sw - 1 79” (2 m)

8” (203 mm)

3/31/08

Round Switch - 12V

7/8 in. 23 mm

2-1/2” (64 mm)

79” (2 m)

Front View

8” (203 mm)

08. Rd Sw - 1

3/31/08

5/16” (8 mm)

1” (25 mm) 8” (203 mm) 7/8 in. 23 mm

Available in

3/4 79”in. 19 mm

2-1/2” (64 mm)

White & Black

(2 m)

5/8 in. 17 mm

Hole size required - 19mm (3/4 in)

6 in. 152 mm 39 in. 1m 79 in. 2m

Hole Diam. 3/4 in. 19 mm

Part #

Description

L-RDSW-1M-BL-1

Black Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC

L-RDSW-1M-WH-1

White Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC

L-RDSW-2M-BL-1

Black Rocker Switch w/ 79” (2 m) Lead, 12VAC/DC

L-RDSW-2M-WH-1

White Rocker Switch w/ 79” (2 m) Lead, 12VAC/DC

3/4” (19 mm) hole required. 3/4 in. 19 mm

152

5/8 in. 17 mm

1-800-227-1171 | trescolighting.com

08B. Rd Sw - detail ( f. TRE ) Hole size required - 19mm (3/4 in)

TrescoBook_2019.indd 152

6/20/19 5:38 PM

Controllers

12VDC Wireless Tri-Mitter Zone 1 Zone 2 Zone 3

Zone 2 Zone 1

Zone 3

* Power Supplies and mounting block sold separately

Wireless switching or dimming of up to 3 independent 12 volt circuits (zones) Max. 36W load capacity per zone Controller uses 3V CR2032 battery 65’ (20 m) range of control from controller to receiver Touch for on/off control; hold down to cycle dimming 1-100% Low profile recessed installation A single receiver can be programmed to up to 9 controllers

Part #

Description

L-HTRISET-1

12VDC Tri-Mitter Set (Wireless Controller + Receiver)

L-HTRICON-NI-1

12VDC Tri-Mitter Controller Nickel (Wireless Controller Only)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 153

Hole size 13/4” (44 mm) in diameter, 1/2” (13 mm) depth

153

6/21/19 8:39 AM

Controllers

12VDC MultiSwitch Station 71 in (1.8 m)

INPUT 2 1/8 in (55 mm)

Connect up to 3 sensors of the same style to universally control run of lights

12 in (305 mm)

OUTPUT

Max. 36W load capacity Soft start on/off function

215/16 in (75 mm)

5/8 in

(15 mm)

Part #

Description

L-HMSMCU-BL-1

12VDC MultiSwitch Station

2 1/8 in (55 mm)

Touch Dimmer on/off 36W

Adjustable Settings Switch

Multiswitch station required for operation Push button with dimming function Low profile recessed installation Touch for on/off control; hold down to cycle dimming 1-100% Finish: Nickel/Black Adjustable settings allow for simple on/off operation or dimming + on/off

79 in (2 m)

Hole size 1/2 in (13 mm) in diameter, 1in (25mm) depth

Part #

Description

L-HMSTD-NI-1

12VDC MultiSwitch Touch Dimmer, Nickel

L-HMSTD-BL-1

12VDC MultiSwitch Touch Dimmer, Black

1 in (25 mm)

19/32mm) (15

154

TrescoBook_2019.indd 154

1-800-227-1171 | trescolighting.com

6/20/19 5:39 PM

Controllers

Motion Controller 36W Multiswitch station required for operation

Energy saving PIR motion sensor Viewing degree: 100° Time on: 10 seconds if no motion

79 in (2 m)

Sensor Range: 0-6.5’ (2 m) Finish: Nickel/Black

Part #

Description

L-HMSMS-NI-1

12VDC MultiSwitch Motion Sensor, Nickel

L-HMSMS-BL-1

12VDC MultiSwitch Motion Sensor, Black

/8 in 1 3 mm) 5 3 (

Door/Proximity Controller 36W Multiswitch station required for operation

Adjustable Settings Switch

5/8 in (15 mm)

79 in (2 m)

Adjustable settings allow for switch to function as door sensor or proximity controller (hand swipe on/off) Hand Sensor Range: 0.2-2.0” (5-50 mm) Door Sensor Range: 0.2-4.7” (Reflection Foil included) Energy saving auto shut-off turns lights off after 3 minutes when in door sensor mode Finish: Nickel/Black

/8 in 1 3 mm) (35

Part #

Description

L-HMSHDS-NI-1

12VDC MultiSwitch Door/Proximity Sensor, Nickel

L-HMSHDS-BL-1

12VDC MultiSwitch Door/Proximity Sensor, Black

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 155

155

6/20/19 5:39 PM

Charging Station

12VDC Dual USB Charging Station

1 1/4 in 32 mm

1 13/32 in 37 mm 1 29/64 in 37 mm

1 7/64 in 28 mm

79 in 2m

USB charging station that ties into the universal 12VDC Tresco system 79â&#x20AC;? starter cord attached (connects to any Tresco 12VDC power supply) Low profile recessed installation Interchangeable face plates

Max. load capacity = 1 port x 2.1 Amp or 2 ports x 1.05 Amp Two interchangeable face plates included (Black and Nickel) Draws 10W at max capacity while charging. Has auto shut-off

Part #

Description

L-HUSB2-BLNI-1

12VDC Dual USB Charging Station

1-7/64â&#x20AC;? (28 mm) hole required.

156

TrescoBook_2019.indd 156

1-800-227-1171 | trescolighting.com

6/20/19 5:40 PM

12VDC COMPONENTS

Install Accessories 157

TrescoBook_2019.indd 157

6/20/19 5:40 PM

Install Accessories

Wire Channel

Features: 15/32” (11.8 mm)

Plastic channel for wire management Available in 3 finishes (black, brown, white) Fits all Tresco wires

9/32” (7.3 mm)

Sold in 5’ (1.5 m) lengths Easily cut to size in the field Durable adhesive mounting

Part #

Description

L-WM5-BL-1

5’ (1.5 m) Wire Management Channel Black

L-WM5-BR-1

5’ (1.5 m) Wire Management Channel Brown

L-WM5-WH-1

5’ (1.5 m) Wire Management Channel White

12V Class 2 Wire and DIY Connectors Part #

Description

L-16CL2-WH50-1

50’ (15 m) Roll 16 AWG 12V Class 2 Wire White

L-LED-WCON-WH-1

12V DIY Barrel Connectors White (1 bag of 10)

L-LED-WCON-BL-1

12V DIY Barrel Connectors Black (1 bag of 10)

See Sales Support section (page 462) for instructions on how to use Class 2 wire with Barrel Connectors.

Rated for low-voltage in-wall use

158

TrescoBook_2019.indd 158

1-800-227-1171 | trescolighting.com

6/20/19 5:40 PM

Install Accessories

Tools of the Trade Starter Kit

Starter Kit Includes: 2 mount blocks

Mini flathead screwdriver

1 drill bit

50’ (15 m) roll of class 2 wire

AMP extractor

VHB tape

10 AMP® connectors

10 barrel connectors

15” (381 mm) canvas bag

Phillips screwdriver

10 wire management clips

Starter Kit Part #

Description

L-TOOLKIT-1

Tools of the Trade Tool Bag Starter Kit

Replacement Items Part #

Description

L-16CL2-WH50-1

50’ (15 m) Roll 16 AWG 12V Class 2 Wire White

L-TRANS-MNT-BL-1

Extra 6-Snap Mounting Block

L-MALE-AMP-10-1

AMP® Connector for Light Fixture (1 bag of 10)

L-WCLP-WH-1

Wire Management Adhesive Clips White (1 bag of 10)

L-LED-WCON-WH-1

12V DIY Barrel Connectors White (1 bag of 10)

L-LED-WCON-BL-1

12V DIY Barrel Connectors Black (1 bag of 10)

L-DB1732-1

17/32” (13.4 mm) Drill Bit

L-P1SCRWDR-1

#1 Phillips Screwdriver

L-MFSCRWDR-1

Mini Flathead Screwdriver

L-PINEXT-1

AMP Connector Extraction Tool

L-VHBTPE-1134-1

7/16” (11 mm) x 111-1/2’ (34 m) VHB Adhesive Tape Roll

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 159

159

6/20/19 5:40 PM

Install Accessories

All product dimensions and specifications are subject to change without prior notice.

AMP® Connector and Extractor

Part #

Description

L-PINEXT-1

AMP Connector Extraction Tool

L-MALE-AMP

AMP® Connector for Light Fixture

Pin Extractor safely removes AMP® Connectors.

VHB Tape Part #

Description

L-VHBTPE-1134-1

7/16” (11 mm) x 111-1/2’ (34 m) VHB Adhesive Tape Roll

L-VHBTPE-15FT-1

3/8” (10 mm) x 15’ (4.5 m) VHB Adhesive Tape Roll

Automotive grade VHB tape can be used to mount all fixtures or as a base layer for mounting Tape LED products.

Starter/Extension Cord Features: Low-voltage wire Used to extend the starter leads for any Tresco 12VDC lights 8 lengths to choose from 66. LED -Link Cord D

1/2” 13 mm

Hole size:

1/2” (13 mm)

01-14-10

Part #

Description

L-LED-LINKD-8-1

3” (8 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-15-1

6” (15 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-25-1

10” (25 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-60-1

24” (60 cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-120-1

48” (120cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-180-1

72” (180cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-245-1

96” (245 cm) 12VDC Starter/Link/Extension Cord

1/2” (13 mm) hole required.

160

TrescoBook_2019.indd 160

1-800-227-1171 | trescolighting.com

6/20/19 5:40 PM

Snap

24V DC PANEL LIGHTING

STANDARD:

120°

900 Lumens HIGH:

120°

1670 Lumens TrescoBook_2019.indd 161

6/20/19 5:40 PM

Snap

Customized lighting solutions are just a “snap” away with the Snap Panels. Sold in 12” x 12” squares, the razor-thin panels can be snapped down to 3” x 3” squares and connected back into any configuration, creating the perfect solution with complete light uniformity.

Panel squares are tileable using our simple DIY connectors (no soldering necessary)

Sold as 12” x 12” panels with (16) 3” x 3” snappable squares on each panel Option A:

Plastic clips and screws are included with each panel for mounting purposes

Features:

Option A: Just 2” of separation required between Snap and backlit surfaces. (8W or 15W) Option B: Just 4” of separation required between Snap and backlit surfaces when strips spaced 3” apart. (15W only)

Typical Applications:

Offered in 15W/ft2 (high) and 8W/ft2 (standard)

Displays

24V DC System

Exhibits

Available in five color temperatures: 3000K, 4000K,

Signage

5000K and 6500K

Store Fixtures

Just 1.65 mm thick and extremely lightweight Dimmable Commercial grade 3-year warranty

Option B:

Uplighting Countertops Back Splashes (Backlighting) Modesty Panels Cabinets

162

TrescoBook_2019.indd 162

1-800-227-1171 | trescolighting.com

6/20/19 5:41 PM

Snap Specifications:

Dimensions: Actual Size

Front 3” (76 mm)

Standard

High

Wattage

8W/ft (.5W per 3” square)

15w/ft2 (.94W per 3” square)

Lumens

900

1670

Efficacy (lm/W)

112

111

Input Voltage

24V DC

Diode Life 3” (76 mm)

50,000 Hours

Max Per 96W Power Supply

12 sq. ft.

6.4 sq. ft.

Mounting

Surface

Warranty

3 Year

Certifications Listed in SAM Manual

Beam Angle

Back

120°

Side Photometric Data Height

Standard

High

2 in

10,202Fc

18,995Fc

4 in

2,708Fc

5,401Fc

6in

1179Fc

2,196Fc

1 ft

295Fc

549Fc

3 ft

33Fc

61Fc

6 ft

8Fc

15Fc

(5 cm)

(109,813lx)

(10 cm)

(204,460lx)

(29,148lx)

(15 cm)

(54,260lx)

(12,690lx)

(.3 m)

(23,637lx)

(3,175lx)

(.9 m)

(5,909lx)

(353lx)

(1.8 m)

(656lx)

(88lx)

(163lx)

L-SP8WA-50K-1 (Standard) , L-SP15WA-50K-1 (High) Tested

Color Temperature Warm White

1/16” (1.65 mm)

2700K

Warm to Neutral

3000K

(3000K)

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 163

Cool White

4500K

(4000K)

Daylight

5500K

(5000K)

6500K

(6500K)

163

6/21/19 8:40 AM

Snap

All product dimensions and specifications are subject to change without prior notice.

Required Items

12” (305 mm)

Light Panel

Panel Light - Starter Cord

022217

12” (305 mm)

12”, 39”,118” (305 mm, 1 m, 3 m )

Starter Cord

3/8” (10 mm)

Description

L-SP8WA-30K-1

24VDC 8W 12” (305 mm) Square Snap Panel 3000K

L-SP8WA-40K-1

24VDC 8W 12” (305 mm) Square Snap Panel 4000K

L-SP8WA-50K-1

24VDC 8W 12” (305 mm) Square Snap Panel 5000K

L-SP8WA-65K-1

24VDC 8W 12” (305 mm) Square Snap Panel 6500K

L-SP15WA-30K-1

24VDC 15W 12” (305 mm) Square Snap Panel 3000K

L-SP15WA-40K-1

24VDC 15W 12” (305 mm) Square Snap Panel 4000K

L-SP15WA-50K-1

24VDC 15W 12” (305 mm) Square Snap Panel 5000K

L-SP15WA-65K-1

24VDC 15W 12” (305 mm) Square Snap Panel 6500K

Mounting clips and screws included. Starter cords sold separately.

1-1/2” (38 mm)

7/16” (11 mm)

Part #

3/16” (5 mm)

3/8” (10 mm)

Part #

Description

L-SPPKT-305MM-1

305 mm (12") Snap Panel Starter Lead

L-SPPKT-1M-1

1 m (39") Snap Panel Starter Lead

L-SPPKT-3M-1

3 m (118") Snap Panel Starter Lead

Power Supply 6” Mounting Block (152 mm)

6” (152 mm)

13” (330 mm)

Hole Size, if Needed:

1-5/16” (33 mm)

5/8 in. 16 mm 2-3/8” (60 mm)

L-24DCELT96-1

6 ft. 1.8 m

Panel Light - Link Cord

L-24DCELT96-1

96W 24VDC Power Supply w/ 5 Barrel Out

L-1BRL5-1

Extra 5 Output Barrel Splice

L-24DCHMGT96-1

96W 24VDC Dimmable Hardwire Power Supply*

*Does not come with 5 Output Barrel Splice

NEW

6 in.Part # 152 mm

022717

1/4” (6 mm)

13/32” (10 mm)

Description

L-SPBTB10-1

Snap Panel Back-to-Back Links (10PCS)

L-SP90BTB4-1

3-3/4 in. 13/32”

(10 mm)

Panel Light95- mm Clips, Spacers & Screws 3/8” (10.16 mm)

Description

1/2 in. 13 mm

3-5/16 in. 84 mm

Connectors 1/2” (13 mm)

6 in. 152 mm

(17

L-24DCHMGT96-1

Hole Size, if Needed:

Optional Items

4” -3/

2-1 1 (68 /16” mm )

Part #

Snap Panel 90° Back-to-Back Link (4PCS)

012717

7/32” (5 mm)

in. Snap Link1-1/16 Cord

1 in. 25 mm

– R1

–

27 mm 3”, 10”, 24”, 48” (8 cm, 25 cm, 60 cm, 120 cm ) 1-5/8 in. 41 mm 3/4 in. 19 mm

24V DC

Part #

Description

L-SPLNK8-1

8 cm (3") Snap Panel Link Cord

L-SPLNK25-1

25 cm (10") Snap Panel Link Cord

L-SPLNK60-1

60 cm (24") Snap Panel Link Cord

L-SPLNK120-1

120 cm (48") Snap Panel Link Cord

–

3/16” (5 mm)

3/8” (10 mm) (103/8” mm)

24V Adaptors

– R1

–

Part #

24V DC

Description

+ R2

L-24VDC3INADP-WH-1

12V to 24V Controller Adaptor Cord Set White

L-24VDC3INADP-BL-1

12V to 24V Controller Adaptor Cord Set Black

–

5.5 x 2.1

Adaptors are used with dimmers and controllers to connect Snap to the traditional Tresco AMP® connection system. 5.5 x 2.1 o

Part #

cordAMP withconnector barrel jack input connector and Female AMP connector 3-inch cord with barrel jack output connector3-inch and Male

Extra Mounting Clips

Project: Prepared for: Submitted by: Prepared by: S. W. LINDSEY

The lighting design portion of this drawing is the property of Tresco Lighting by Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject matter is original to RAS. Any vendor receiving this drawing from RAS shall hold and use this drawing for the sole benefit of RAS, and shall not disclose it to or use or reproduce it for any third party, or perform any act adverse to the interest of RAS with respect to this drawing without the express written permission of RAS. Vendors shall not revise any physical, dimensional, or performance characteristic unless authorized by RAS.

Extensions

LAYOUT NO. :

1146419_12_17FIS

TrescoBook_2019.indd 164

LAYOUT NO. :

1146419_12_17FIS

L-SPCLP6-1

Snap Panel Mounting Clips (6PCS)

Part #

Description

L-SPEXT-1M-1

1 m (39") Snap Panel Starter Extension

L-SPEXT-2M-1

2 m (79") Snap Panel Starter Extension

L-SPEXT-3M-1

3 m (118") Snap Panel Starter Extension

DATE :

01/04/2018

DATE :

1-1/2” (38 mm)

164

Project: Prepared for: Submitted by: Prepared by: S. W. LINDSEY

01/04/2018

39”, 79”, 118” (1 m, 2 m, 3 m )

7/16” (11 mm)

Description

TRESCO DESIGN LAYOUT

1-800-227-1171 | trescolighting.com

6/20/19 5:41 PM

120V PUCK LIGHTING

Pockit 120-L ®

100°

118 Lumens 165 TrescoBook_2019.indd 165

6/20/19 5:41 PM

Pockit® 120-L The Tresco Pockit® 120-L is a true plug-and-play lighting solution. It allows for easy “jumping” over and around obstacles without the need for an electrician and can be recessed or surface mounted to accommodate your design and decor. You can easily retrofit existing fluorescent display lights with the Pockit® 120-L, to provide striking, high illumination at a fraction of the energy costs and heat generated by traditional lights.

Surface or recess mount with springs

Easy-to-replace twist on/off LED bulbs (GX53 base)

Linkable up to 10 fixtures

True plug-and-play: no transformer or power supply required

Features:

Typical Applications:

Dimmable by standard LED wall dimmers

Interior cabinets and shelving

Frosted diffuser lens

Under cabinets

9” (229 mm) input/output leads attached to fixtures

Task and flood lighting

Dimmable

Displays

Replaceable LED heads

Murphy beds

Available Finishes:

White (WH)

166

TrescoBook_2019.indd 166

Black (BL)

Nickel (NI)

1-800-227-1171 | trescolighting.com

6/20/19 5:41 PM

Pockit® 120-L

Dimensions: Actual Size

Front

Specifications:

9” (229 mm)

Wattage

Lumens

118

Efficacy (lm/W)

Input Voltage

120V

Diode Life

25,000 Hours

Max Per 60W Power Supply

N/A

Max Continuous Run

10 Fixtures

Mounting

Recess/Surface

Warranty

1 Year

Certifications 3-5/8” (92 mm)

Beam Angle

Side

100° Photometric Data

Height

Light Output

Beam Area

1ft

48.50Fc

2.2ft L x 2.2ft W

3ft

5.39Fc

6.6ft L x 6.6ft W

6ft

1.35Fc

13.3ft L x 13.2ft W

(.3 m)

(.67 m L x .67 m W)

(522lx)

(.9 m)

(58lx)

(1.8 m)

(2 m L x 2 m W)

(14.5lx)

(4.1 m L x 4 m W)

L-LPOC-3W-120L-C Tested

Color Temperature 3-1/4” (83 mm)

7/8” (22 mm)

Warm White

2700K

Warm to Neutral

3000K

Warm (2700K)

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 167

167

6/20/19 5:41 PM

42L. LED Puck Non-Linkable POC-LED-NL

Pockit 120-L ®

011210

9 in. 229 mm All product dimensions and specifications are subject to change without prior notice.

Hole size required:

5/8 in. 16 mm

3-5/8 in. Items Required

92 mm 42L. LED Puck Non-Linkable POC-LED-NL

10 ft. 3m

011210

Pockit® 120L – Non-Linkable 9 in. 229 mm

Hole size required:

5/8 in. 16 mm

3-5/8 in. 92 mm

10 ft. 3m

062508

43L. LED - Puck Linkable POC-LED 7/8 in. 22 mm

3-5/8 in. 92 mm

3-1/4 in. 83 mm

9 in. 229 mm

3-5/8 in. 92 mm

3-1/4 in. 83 mm

7/8 in. 22 mm

011210

Hole size required:

5/8 in. 16 mm

3W Nickel 5000K LED Pockit® 120-L Non-Linkable, 120V

L-LPOC-3W-120NL-CWH-1

3W White 5000K LED Pockit® 120-L Non-Linkable, 120V

L-LPOC-3W-120NL-WBL-1

3W Black 2700K LED Pockit® 120-L Non-Linkable, 120V

L-LPOC-3W-120NL-WNI-1

3W Nickel 2700K LED Pockit® 120-L Non-Linkable, 120V

L-LPOC-3W-120NL-WWH-1

3W White 2700K LED Pockit® 120-L Non-Linkable, 120V

Part #

Description

L-LPOC-3W-120L-CBL-1

3W Black 5000K LED Pockit® 120-L Linkable, 120V

L-LPOC-3W-120L-CNI-1

3W Nickel 5000K LED Pockit® 120-L Linkable, 120V

L-LPOC-3W-120L-CWH-1

3W White 5000K LED Pockit® 120-L Linkable, 120V

L-LPOC-3W-120L-WBL-1

3W Black 2700K LED Pockit® 120-L Linkable, 120V

L-LPOC-3W-120L-WNI-1

3W Nickel 2700K LED Pockit® 120-L Linkable, 120V

062408

L-LPOC-3W-120L-WWH-1 LED - Replacement Head POC-LED 011210

3-1/4 in. 83 mm 2-7/8 in. 74 mm

062408

7/8 in.

011210

2-7/8 in. 74 mm

1 in. 25 mm

45. Linking Cord – FPOC-LinkA 180cm 2 in. 53 mm

Link Cord/Extension 1 in. 25 mm Hole size, if needed:2 in. 53 mm 5/8 in.

16 mm

Hole size, if needed:

5/8 in. 16 mm

3W White 2700K LED Pockit® 120-L Linkable, 120V

25,000 end of life hours. 3-1/4” (83 mm) hole required for recessing. Trim Kit is included with each Light Body, which is required when mounting the light to a surface. All Pockit® lights can be either surface mounted or recess mounted.

22 mm Replacement Head - 3W 3-1/4POC-LED in. 44L. LED - Replacement Head with Frosted Diffuser 83 mm

TrescoBook_2019.indd 168

L-LPOC-3W-120NL-CNI-1

10 ft. 3m

9 in. 229 mm

Optional Items

168

3W Black 5000K LED Pockit® 120-L Non-Linkable, 120V

5/8 in. 16 mm

10 ft. 3m 9 in. 229 mm 44L.

L-LPOC-3W-120NL-CBL-1

Hole size required:

® Pockit 120L – Linkable 43L. LED - Puck Linkable POC-LED

9 in.

Description

25,000 end of life hours. 3-1/4” (83 mm) hole required for recessing. Trim Kit is included with each light body, which is required when mounting the light to a surface. All Pockit® lights can be either surface mounted or recess mounted.

011210

062508

7/8 in. 229 22 mmmm

Part #

070808

Part #

Description

L-LPOC-3WA-WBL-1

2700K Black LED Pockit® 120-L Replacement Head, 120V

L-LPOC-3WA-WNI-1

2700K Nickel LED Pockit® 120-L Replacement Head, 120V

L-LPOC-3WA-WWH-1

2700K White LED Pockit® 120-L Replacement Head, 120V

L-LPOC-3WA-CBL-1

5000K Black LED Pockit® 120-L Replacement Head, 120V

L-LPOC-3WA-CNI-1

5000K Nickel LED Pockit® 120-L Replacement Head, 120V

L-LPOC-3WA-CWH-1

5000K White LED Pockit® 120-L Replacement Head, 120V

GX53 base. 25,000 end of life hours. Replacement head includes a frosted diffuser as standard.

NOTE: Existing Tresco® Fluorescent Pockit® T2 can be retrofitted using these replacement heads.

Part #

Description

L-FPOC-LINKA-25-BL-1

10” (25cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-25-WH-1

10” (25cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-60-BL-1

24” (60cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-60-WH-1

24” (60cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-120-BL-1

48” (120cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-120-WH-1

48” (120cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-180-BL-1

72” (180cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-180-WH-1

72” (180cm) White Pockit® 120-L/M Linking Cord

1-800-227-1171 | trescolighting.com

6/20/19 5:42 PM

7/8 in. 23 mm

08.Switch Rd Sw -1 Round - 120V

3/31/08

47. RDSW 120cm

Pockit® 120-L 070808 u032209

Part #

Description

L-RDSW-1M-120-WH-1

120V White Round Rocker Switch w/ 39” (1 m) Lead

L-RDSW-2M-120-BL-1

120V Black Round Rocker Switch w/ 79” (2 m) Lead

ALL New by LL 1/23/09, based on IL#9 L-RDSW-1M-120-BL-1 BlackSupply” Round Rocker Switch w/Book 39” (1111 m) Lead Update caption to120V “Power for LED Spec 7/8 in. 23 mm

17c. Touch On/Off Switch TS2-72 s012309 u020209 u010811 L-RDSW-2M-120-WH-1 120V White Round Rocker Switch w/ 79” (2 m) Lead 6 ft. 1.8 m

3/4” (19 mm) hole required. 2-1/8 in. 54 mm

6 in. 152 mm

5 ft. 1.5 m

1-9/16 in. 40 mm

Hole size, if needed:

3/4 in. 19 mm

5/8 in. 16 mm

39 in. 1 m 79 in. 2 m

14 in. 356 mm

Female receptacle can accept upHole to size (3) Power Supply plugs (120V ea.) required: 6 in.

5/8 in. 17 mm

152 mm

3/4 in. 19 mm

1m or 2m

Hole size required - 19mm (3/4 in)

ALL New by LL 1/23/09, based on IL#9 Update caption to “Power Supply” for LEDPart Spec#Book 111

Touch On/Off Switch

3/4 in. 19 mm

L-TS2-72-1

17c. Touch On/Off Switch TS2-72 2-1/8 in. 54 mm

5/8 in. 17 mm

Touch On/Off w/Cord And Touch Pad. Black, 200W

s012309 u020209 u010811

6 ft. 1.8 m

5 ft. 1.5 m

Description

On/off Switch touch pad attaches to surface with adhesive backing. Power supply plugs into on/off switch touch pad. 1-9/16 in.

40in) mm Hole size required - 19mm (3/4

3-3/8 in. 85 mm

14 in. 356 mm

3/4 in. 21 mm

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

More optional items on next page.

3-3/8 in. 85 mm

3/4 in. 21 mm

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 169

169

6/20/19 5:42 PM

Wire mold knockout or conduit fitting

1/2 in. 13 mm

Pockit® 120-L

All product dimensions and specifications are subject to change without prior notice.

Hardwire Boxes

2-1/4 in. 56 mm

46. Linking Cord

3-9/16 in. 90 mm

46. Linking Cord

1-1/2 in. 40 mm

070908

Part #

Description

L-HWB-WH-T5-1

T5 White Hardwire Box, w/o Switch

L-HWB-BL-T5-1

T5 Black Hardwire Box, w/o Switch

L-HWB-WH-T5-S-1

T5 White Hardwire Box, w/Switch

L-HWB-BL-T5-S-1

T5 Black Hardwire Box, w/Switch

070908

Maximum (10) light fixtures per hardwire box. Must use Pockit® 120L/M Adaptor.

Pockit® 120-L/M Adaptor for Hardwire Box

Part #

Description

L-FPOC-HWB-ADP-WH

Pockit® 120-L/M Adaptor for Hardwire Box, White

7-3/4 in. 195L-FPOC-HWB-ADP-BL mm

Pockit® 120-L/M Adaptor for Hardwire Box, Black

Required when using Hardwire Box.

7-3/4 in. 195 mm

Hole size, if needed:

e Box w Switch HWB-S-4 (T4) Wire mold knockout or conduit fitting

NOTE: Must use hardwire box when used with a wall dimmer. Do not dim a receptacle.

3/4 in. 4/1/08 u3/22/09 19 mm

Hole size, if needed:

3/4 in. Hole size, if needed: 5/8 in. 19 mm

1/2 in. 13 mm

16 mm

Hole size, if needed:

5/8 in. 16 mm

How to Connect Using Hardwire Box:

droC gnikniL .64

809070

56 mm 2-1/4 in.

m®m 591 120-L/M Adaptor Pockit .ni 4/3-7

90 mm 3-9/16 in.

Hardwire Box

1-1/2 in. 40 mm

LED Wall Dimmers

:dedeen fi ,ezis eloH

mm 91 .ni 4/3

Part #

Description

12VDC

COMPONEN TS

Power Supplie s

805260

L-DVCL-153P-WH-1 Lutron Diva® C•L™ Dimmer w/out plate :dedeen fi ,ezis eloH 01211see 0 DEL-COP elbaknmiL For details m 6k1cuP - DEL .L34 L-CTCL-153P-WH-1 Lutron Skylark Contour C•L™ Dimmer w/out plate .ni 8/5 Power Supplies on Page 141.

Wire mold knockout or conduit fitting

13 mm 1/2 in.

170

TrescoBook_2019.indd 170

1-800-227-1171 | trescolighting.com

mm 92

6/20/19 5:42 PM

120V PUCK LIGHTING

Pockit 120-M ®

100°

270 Lumens171 TrescoBook_2019.indd 171

6/20/19 5:42 PM

Pockit® 120-M

The Pockit® 120-M is a continuation of our popular Pockit® 120 linkable series. The smaller size rivals standard “puck” style light fixtures but produces 25 percent more light output than traditional halogen and xenon puck lights. Each fixture has a built-in dimmable driver and the commercial grade, all-metal construction provides optimal heat sinking.

Recess or surface mount (ring included)

True plug & play: No transformer or

Linkable up to 45 fixtures

power supply required

Features:

Typical Applications:

Surface or recess mount

Displays

Dimmable to 50% by standard LED wall dimmers

Task lighting/flood lighting

No power supply required

Interior cabinets/shelving Under cabinets

Available Finishes:

White (WH)

172

TrescoBook_2019.indd 172

Black (BL)

Nickel (NI)

1-800-227-1171 | trescolighting.com

6/20/19 5:42 PM

Pockit® 120-M Dimensions: Actual Size

9” (229 mm)

Specifications:

Front Wattage

Lumens

270

Efficacy (lm/W)

67.5

Input Voltage

120V

Diode Life

30,000 Hours

Max Per 60W Power Supply

N/A

Max Continuous Run

45 Fixtures

2-3/8” (60 mm)

Mounting

Recess / Surface

Side

Warranty

1 Year

7/8” (22 mm)

Certifications

Beam Angle

2-3/8” (60 mm)

100° Photometric Data

Mounting Ring 7/8“ (22 mm)

Height

Light Output

1ft

110.5Fc

3ft

12.28Fc (132.2lx)

(2.1 m L x 2.1 m W)

6ft

3.07Fc

13.9ft L x 13.8ft W

(.3 m) (.9 m) (1.8 m)

Beam Area 2.3ft L x 2.3ft W

(.7 m L x .7 m W)

(1189.4lx)

6.9ft L x 6.9ft W

(33.0lx)

(4.2 m L x 4.2 m W)

L-MPOC-4W-120NL-C Tested

Color Temperature 2-3/4” (70 mm)

Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Warm (3000K)

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 173

173

6/20/19 5:42 PM

All product dimensions and specifications are subject to change without prior notice.

Required Items ® Pockit 120-M Non-Linkable Linkable Pockit 120-M–LED Lights • L -MPOC-4W-120L

Shown with Mounting Ring 9" (228mm)

7/8" (22mm)

2-3/4" (70mm) 9" (228mm)

7/8" (22mm)

Pockit® 120-M – Linkable Shown with Mounting Ring

9" (228mm)

2-3/4" (70mm) 9" (228mm)

7/8” (22mm)

9" (228mm)

2-3/8" (60mm)

L-MPOC-4W-120NL-WWH-1

120V Pockit® 120-M Non-Linkable, Warm, White

L-MPOC-4W-120NL-WBL-1

120V Pockit® 120-M Non-Linkable, Warm, Black

L-MPOC-4W-120NL-WNI-1

120V Pockit® 120-M Non-Linkable, Warm, Nickel

L-MPOC-4W-120NL-CWH-1

120V Pockit® 120-M Non-Linkable, Cool, White

L-MPOC-4W-120NL-CBL-1

120V Pockit® 120-M Non-Linkable, Cool, Black

L-MPOC-4W-120NL-CNI-1

120V Pockit® 120-M Non-Linkable, Cool, Nickel

Part #

Description

L-MPOC-4W-120L-WWH-1

120V Pockit® 120-M Linkable, Warm, White

L-MPOC-4W-120L-WBL-1

120V Pockit® 120-M Linkable, Warm, Black

L-MPOC-4W-120L-WNI-1

120V Pockit® 120-M Linkable, Warm, Nickel

L-MPOC-4W-120L-CWH-1

120V Pockit® 120-M Linkable, Cool, White

L-MPOC-4W-120L-CBL-1

120V Pockit® 120-M Linkable, Cool, Black

L-MPOC-4W-120L-CNI-1

120V Pockit® 120-M Linkable, Cool, Nickel

08. Rd Sw - 1

3/31/08

Surface Mounting Ring

3/4" (19mm)

2-3/4" (70mm)

7/8 in. 23 mm

Part #

Description

L-MPOC-PKT8-WH-1

120V Pockit® 120-M, 8 ft. (2.4 m) Starter Cord White

L-MPOC-PKT8-BL-1

120V Pockit® 120-M, 8 ft. (2.4 m) Starter Cord Black

Sold separately.

Optional Items

08. Rd Sw - 1

082114

090914

Pockit® 120-M Starter Cord

Round Switch - 120V

Pockit 120-M Surface Mounting Ring

30,000 end of life hours. 2-3/8” (60 mm”) hole required for recessing. All Pockit® lights can be either surface mounted or recess mounted. Surface mount ring included with each light. Dimmable to 50% by standard LED wall dimmers.

Pockit® 120-M Power Cord

8’ (2.4 m)

Description

2-3/8" (60mm)

7/8" (22mm)

Part #

082114

47. RDSW 120cm 3/31/08

7/8 in. 23 mm

070808 u032209

Part #

Description

L-RDSW-1M-120-BL-1

120V Black Round Rocker Switch w/ 39” (1 m) Lead

L-RDSW-1M-120-WH-1

120V White Round Rocker Switch w/ 39” (1 m) Lead

L-RDSW-2M-120-BL-1

120V Black Round Rocker Switch w/ 79” (2 m) Lead

L-RDSW-2M-120-WH-1

120V White Round Rocker Switch w/ 79” (2 m) Lead

19 mm (3/4”) hole required. 6 in. 152 mm Hole size, if needed:

3/4 in. 19 mm

39 in. 1 m 79 in. 2 m

5/8 in. 16 mm

6 in. 152 mm

5/8 in. 17 mm

Hole size required: 3/4 in. 19 mm

1m or 2m

Hole size required - 19mm (3/4 in)

1-800-227-1171 | trescolighting.com

174

3/4 in. 19 mm

TrescoBook_2019.indd 174

5/8 in.

6/20/19 5:42 PM

14 in. 356 mm

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

Pockit® 120-M ALL New by LL 1/23/09, based on IL#9 PartSpec # Book 111 Update caption to “Power Supply” for LED

Touch On/Off Switch

L-TS2-72-1

17c. Touch On/Off Switch TS2-72

Touch On/Off w/Cord And Touch Pad. Black, 200W

s012309 u020209 u010811

On/off Switch touch pad attaches to surface with adhesive backing. Power supply plugs into on/off switch touch pad.

6 ft. 1.8 m

2-1/8 in. 54 mm

Description

5 ft. 1.5 m

1-9/16 in. 40 mm 14 in.

45. Linking Cord – FPOC-LinkA 356 mm180cm

3-3/8 in. 85 mm

070808

3/4 in. 21 mm

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

Link Cord/Extension

Hole size, if needed:

5/8 in. 16 mm

Hole size, if needed:

5/8 in. 16 mm

Part #

Description

L-FPOC-LINKA-25-BL-1

10” (25cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-25-WH-1

10” (25cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-60-BL-1

24” (60cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-60-WH-1

24” (60cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-120-BL-1

48” (120cm) Black Pockit® 120-L/M Linking Cord

3/4 in. L-FPOC-LINKA-120-WH-1 21 mm 3-3/8 in. 85 mmL-FPOC-LINKA-180-BL-1

48” (120cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-180-WH-1

72” (180cm) White Pockit® 120-L/M Linking Cord

72” (180cm) Black Pockit® 120-L/M Linking Cord

More Optional Items on Next Page.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 175

175

6/20/19 5:42 PM

e Box w Switch HWB-S-4 (T4)

4/1/08 u3/22/09

Wire mold knockout or conduit fitting

1/2 in. 13 mm

Pockit® 120-L

All product dimensions and specifications are subject to change without prior notice.

Hardwire Boxes 2-1/4 in. 56 mm 3-9/16 in. 90 mm

46. Linking Cord

Part #

Description

L-HWB-WH-T5-1

T5 White Hardwire Box, without Switch

L-HWB-BL-T5-1

T5 Black Hardwire Box, without Switch

L-HWB-WH-T5-S-1

T5 White Hardwire Box, with Switch

L-HWB-BL-T5-S-1

T5 Black Hardwire Box, with Switch

070908

Maximum (10) Light fixtures per Hardwire Box.

1-1/2 in. Must use Pockit® 120L/M Adaptor. 4046. mmLinking Cord 070908

46. Linking Cord

070908

Part #

Pockit® 120-L/M Adaptor

Description

L-FPOC-HWB-ADP-WH 7-3/4 in. L-FPOC-HWB-ADP-BL 7-3/4 in. 195 mm

for Hardwire Box

Pockit® 120-L/M Adaptor for Hardwire Box, White Pockit® 120-L/M Adaptor for Hardwire Box, Black

195 mm

Required when using Hardwire Box.

7-3/4 in. 195 mm

NOTE: Must use hardwire box when used with a wall dimmer. Do not dim a receptacle.

Hole size, if needed:

re Box w Switch HWB-S-4 (T4) Wire mold knockout or conduit fitting

Hole size, 3/4 if in.needed:

3/4mm in. 19

4/1/08 u3/22/09 19 mm

Hole size, if needed:

in. Hole size, if5/8 needed: Hole size, if needed: 16 mm

1/2 in. 13 mm

3/4 in. 19 mm

5/8 in. 16 mm

411280

LN021-W4-COPM- L • sthgiL DEL M-021 ®tikcoP elbakniL-noN

Hole size, if needed:

5/8 in. 16 mm

How to Connect Using Hardwire Box:

809070

droC gnikniL .64

56 mm 2-1/4 in.

mm 591 .ni 4/3-7

Pockit® 120-L/M Adaptor

90 mm 3-9/16 in. 1-1/2 in.

Hardwire Box40 mm

:dedeen fi ,ezis eloH

mm 91 .ni 4/3

12VDC

COMPONEN TS

Power Supplie s

LED Wall Dimmers

For details see Power Supplies on Page 141.

"9 )mm822(

"8/7 )mm22(

Part #

Description

L-DVCL-153P-WH-1 :dedeen fi ,ezis eloH

Lutron Diva® C•L™ Dimmer without plate

mm 61

L-CTCL-153P-WH-1 .ni 8/5

"4/3-2 )mm07(

Lutron Skylark Contour"9 C•L™ Dimmer without plate )mm822(

"8/7 )mm22(

"8/3-2 )mm06(

Wire mold knockout or conduit fitting

13 mm 1/2 in.

176

TrescoBook_2019.indd 176

1-800-227-1171 | trescolighting.com

6/20/19 5:42 PM

120V LINEAR LIGHTING

T5 Trescent LED ®

150°

295 Lumens per ft. (967 per meter)

177

TrescoBook_2019.indd 177

6/20/19 5:42 PM

T5 Trescent® LED

Look again — that’s not a fluorescent, that’s an LED Linear Light. The T5 LED has the same low profile as fluorescent strip lights without the harmful material, costly energy consumption or bulb replacement and breakage. While fluorescent bulbs produce uneven light, the T5 LED Series produces even light throughout the length of the fixture, giving off 20 percent more light than other brands.

Proprietary diffuser to eliminate dotted appearance

Integrated on/off switch Available in black or white finish

Linkable up to 150W or 10 fixtures

6’ (1.8 m) starter cord, mounting clips, back-to-back connectors & 90° connectors included

Features:

Typical Applications:

6 lengths available

Displays

Slim end cap design eliminates dark spots when linking

Office furniture

Averages 30% less energy consumption than fluorescent equivalent

Cabinets or shelving

No hum or flicker as found in similar fluorescent lights Instant on, instant brightness Commercial grade 3-year warranty

Laboratory furniture Back lighting Soffit, perimeter lighting or cove lighting

Available Finishes:

White (WH)

178

TrescoBook_2019.indd 178

Black (BL)

1-800-227-1171 | trescolighting.com

6/20/19 5:42 PM

T5 Trescent® LED

Specifications:

Dimensions: Actual Size

Side

Front 7/8” (22 mm)

1-11/16” (42.5 mm) 5/32” (4 mm)

Wattage

4.3W/ft. (14W/m)

Lumens

295 per ft. (967 per m)

Efficacy (lm/W)

68.6

Input Voltage

120V

Diode Life

10-1/2” (267 mm)

Max Per 60W Power Supply

N/A

Max Continuous Run

10 Fixtures or up to 150W

Mounting

Surface

Warranty

3 Year

Certifications

13-1/2” (343 mm)

Beam Angle

22-1/2” (571 mm) 35-1/2” (904 mm)

30,000 Hours

End (Male)

150°

47-1/2“ (1204 mm) 59-1/4“ (1504 mm)

Photometric Data 1-11/16” (42.5 mm)

Height

Light Output

Beam Area

1ft

318.50Fc

2.6ft L x 15.3ft W

3ft

35.39Fc

7.9ft L x 45.8ft W

6ft

8.85Fc

15.8ft L x 91.6ft W

(.3 m) (.9 m) (1.8 m)

(3428.30lx) (380.93lx) (95.26lx)

(.8 m L x 4.7 m W)

(2.4 m L x 14 m W)

(4.8 m L x 27.9 m W)

L-LT518W-1204C Tested

7/8” (22 mm)

End (Female)

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Warm (3000K)

Daylight

5500K

Cool (5000K)

6500K

Daylight (6500K)

IES data verified by Intertek testing lab.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 179

179

6/20/19 5:42 PM

42.5 mm

0-1/2 in. (267 mm) 3-1/2 in. (343 mm) 2-1/2 in. (571 mm) 5-1/2 in. (904 mm) 7-1/2 in. (1204 mm) 9-1/4 in. (1504 mm)

T5 Trescent® LED Required Items

All product dimensions and specifications are subject to change without prior notice.

Power Cord

2-1/4 in. 56 mm

T5 Trescent LED Series ®

3-9/16 in. 90 mm Power Cord 6 ft. 1.8 m

90 Degree Adaptor

7/8 in.

90 Degree Adaptor

4/1/08 u3/22/09

Wire mold knockout or conduit fitting

9/16 in. 15 mm

T5 LED 3W 3000K 10.5” (267 mm)

L-LT53W-267C*-5

T5 LED 3W 5000K 10.5” (267 mm)

L-LT53W-267D*-5

T5 LED 3W 6500K 10.5” (267 mm)

L-LT54W-343W*-5

T5 LED 4W 3000K 13.5” (343 mm)

L-LT54W-343C*-5

T5 LED 4W 5000K 13.5” (343 mm) 1-11/16 T5 LED 4W 6500K 13.5” (343in. mm) 42.5 mm T5 LED 7W 3000K 22.5” (571 mm)

L-LT57W-571W*-5 10-1/2 in. (267 mm) L-LT57W-571C*-5 13-1/2 in. (343 mm) L-LT57W-571D*-5 22-1/2 in. (571 mm) 35-1/2 in. (904 mm) L-LT514W-904W*-5 47-1/2 in. (1204 mm) L-LT514W-904C*-5 59-1/4 in. (1504 mm) L-LT514W-904D*-5

1-11/16 in. 42.5 mm

10-1/2 in. (267 mm) 13-1/2 in. (343 mm) 22-1/2 in. (571 mm) 35-1/2 in. (904 mm) 47-1/2 in. (1204 mm) 59-1/4 in. (1504 mm)

22 mm re Box w Switch HWB-S-4 (T4)

Description

6 ft. L-LT53W-267W*-5 1.8 m

L-LT54W-343D*-5

1-7/16 in. 37 mm

Part #

1/2 in. 13 mm

9/16 in. 15 mm

Optional Items

T5 LED 7W 5000K 22.5” (571 mm) T5 LED 7W 6500K 22.5” (571 mm) T5 LED 14W 3000K 35.5” (904 mm) T5 LED 14W 5000K 35.5” (904 mm) T5 LED 14W 6500K 35.5” (904 mm)

L-LT518W-1204W*-5

T5 LED 18W 3000K 47.5” (1204 mm)

L-LT518W-1204C*-5

T5 LED 18W 5000K 47.5” (1204 mm)

L-LT518W-1204D*-5

T5 LED 18W 6500K 47.5” (1204 mm)

L-LT525W-1504W*-5

T5 LED 25W 3000K 59.25” (1504 mm)

L-LT525W-1504C*-5

T5 LED 25W 5000K 59.25” (1504 mm)

L-LT525W-1504D*-5

T5 LED 25W 6500K 59.25” (1504 mm)

*For white fixture use (WH), for black use (BL). 6 ft. (1.8 m) starter cord, straight & 90° U-Clips, back-to-back connector and 90° adapter included.

Hardwire Boxes 2-1/4 in. 56 mm 3-9/16 in. 90 mm

34. L3 Metal UClips

46. Linking Cord

063008

1-1/2 in. 40 mm

070908

5/8 in. 15 mm

Hardwire Box Adaptor

Hole Size, if Needed:

3/4 in. 19071008 mm

Description

7/8 in. L-HWB-WH-T5-1 22 mm

T5 White Hardwire Box, without Switch

L-HWB-BL-T5-1

T5 Black Hardwire Box, without Switch

L-HWB-WH-T5-S-1

T5 White Hardwire Box, with Switch

L-HWB-BL-T5-S-1

T5 Black Hardwire Box, with Switch

*Adaptor cord is required for proper connection.

15/16 in. 24 mm

35. Linking Cord TRS5-LINKE

Part #

u 032009

Part #

Description

L-LT5-HWBADP-**-1

T5 LED Hardwire Box Adaptor

7/8 in. 22 mm

**For white fixture use (WH), for black use (BL).

34. L3 MetalU UClips Clips - 063008 Metal

5/8 in. 15 mm

Wire mold knockout or conduit fitting

15/16 in. 24 mm

13/16 in. 20 mm

Hole Size, if Needed:

3/4 in. 19 mm

1-1/2 in. 40 mm

TrescoBook_2019.indd 180

Description

L-TRS5-UCLP-M-1

Metal T5 Replacement U-clips, Set of 2

Part #

Description

L-LT5-LNK15-BL-1

6” (15cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK15-WH-1

6” (15cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK25-BL-1

10” (25cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK25-WH-1

10” (25cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK60-BL-1

24” (60cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK60-WH-1

24” (60cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK120-BL-1

48” (120cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK120-WH-1

48” (120cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK180-BL-1

72” (180cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK180-WH-1

72” (180cm) White T5 Trescent® LED Linking Cord

1/2 in. 13 mm

Link Cord / Extension

180

13/16 in. 20 mm

Part #

1-800-227-1171 | trescolighting.com

6/20/19 5:42 PM

BATTERY

Alpha

53Â°

26 Lumens 181 TrescoBook_2019.indd 181

6/20/19 5:43 PM

Alpha

Enlightenment begins with ALPHA. The hassle-free wireless installation, high capacity USB rechargeable battery and slim profile of this all-purpose ecological light allows illumination of areas that are frequently left in the dark. The ALPHA light is perfect for utility closets drawers, and cabinets.

Twist and lock detachable mounting bracket

Pivoting light face

Available in multiple finishes

Features:

Typical Applications:

USB rechargeable battery

Closets

Integrated motion sensor

Drawers

Twist and lock mounting bracket

Interior cabinets

Pivoting light face Slim profile Commercial grade 3-year warranty

Available Finishes:

Nickel (NI)

182

TrescoBook_2019.indd 182

1-800-227-1171 | trescolighting.com

6/20/19 5:43 PM

Alpha

Specifications:

Dimensions: Actual Size

Front

2-35/64 in (65 mm)

Top

Wattage

.8W

Lumens

Battery

5VDC Mini USB Rechargeable

Diode Life

20,000 Hours

Mounting

Surface

Warranty

3 Year

Motion Detection Range

79'' (2m)

Motion Detection Angle

50°

“On” Time

10 Seconds

Certifications

Beam Angle 3-9/64 in (80 mm)

Side

53° Photometric Data

Height

Light Output

Beam Area

1ft

12.50Fc

1.7ft L x3ft W

3ft

1.39Fc (14.9lx)

(.9 m L x .9 m W)

6ft

0.35Fc

10.3ft L x 18.2ft W

(.3 m) (.9 m) (1.8 m)

(.5 m L x .9 m W)

(134.5lx)

3ft L x 3ft W

(3.7lx)

(3.1 m L x 5.5 m W)

L-HALPHA-WNI TESTED

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Warm (3000K) 33/64 in (13 mm)

4500K

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Underwriters Laboratory

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 183

Cool White

183

6/20/19 5:43 PM

(65 mm)

Alpha

All product dimensions and specifications are subject to change without prior notice. 2-35 /6 (65 4 in mm )

Required Items Alpha

LED AlphaLight •

061915

Part #

Description

L-HALPHA-WNI-1

Battery Powered Light w/ Motion Sensor 3000K, Nickel

L-HALPHA-CNI-1

Battery Powered Light w/ Motion Sensor 5000K, Nickel

Includes mounting bracket and USB cord for re-charging in /64 ) 3-9 0 mm (8

3-9/64 in (80 mm)

2-35/64 in (65 mm)

22˙

2-35 /6 (65 4 in mm )

33/64 in (15 mm)

3-9/64 in (80 mm)

2-33/64 in (65 mm)

Optional Items in /64 ) 3-9 0 mm (8

USB Wall Charger

1-5/16” (33 mm)

Part #

Description

L-USB-120VP-1

5V USB Wall Charger

1-5/16” (33 mm)

22˙

33/64 in (15 mm)

3-9/64 in (80 mm)

184

TrescoBook_2019.indd 184

2-33/64 in (65 mm)

1-800-227-1171 | trescolighting.com

6/20/19 5:43 PM

BATTERY

Fit 40Â°

32 Lumens 185 TrescoBook_2019.indd 185

6/20/19 5:43 PM

Fit

FIT is the light that epitomizes form and function with its slim profile. Recessed in a depth of just 10mm, it blends into the cabinet creating a clean appearance uncommon in other wireless fixtures, making it the picture perfect light that begs to be seen.

Easily detachable for battery replacement

Features:

Typical Applications:

Battery operated (5 x AAA included)

Closets

Integrated motion sensor

Bed Frames

Slim profile

Night Stands

Recessed installation

Armoires

Commercial grade 3-year warranty

Available Finishes:

Nickel (NI)

186

TrescoBook_2019.indd 186

1-800-227-1171 | trescolighting.com

6/20/19 5:43 PM

Fit Specifications:

Dimensions: Actual Size

Front

Side

Wattage

.8W

Lumens

Battery

AAA x 5

Diode Life

20,000 hours

Mounting

Recess

Warranty

3 Year

Motion Detection Range

79” (2m)

Motion Detection Angle

110°

“On” Time

10 Seconds

Certifications 9-27/32 in (250 mm)

Beam Angle

40° Photometric Data

Height

Light Output

Beam Area

1ft

52.70Fc

.7ft L x .7ft W

3ft

5.86Fc

(196.8lx)

(.3 m L x .3 m W)

6ft

1.46Fc

4.4ft L x 4.3ft W

(.3 m) (.9 m) (1.8 m)

(1777.7lx)

(.09 m L x .09 m W)

2.2ft L x 2.2ft W

(49.1lx)

(.6 m L x .6 m W)

L-HFIT-CNI Tested

29/64 in (10 mm) (Recessed Depth)

1-49/64 in (45 mm)

Color Temperature Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K) IES data verified by Underwriters Laboratory

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 187

187

6/20/19 5:43 PM

1-49/64 in (45 mm)

9-27/32 in (250 mm)

Fit

All product dimensions and specifications are subject to change without prior notice.

Required Items 2 in 7/3 m) 9-2 0m (25

Fit

Part #

Description

L-HFIT-CNI-1

Battery Powered Fit light w/ motion sensor, 5000K, Nickel

5xAAA Batteries included

1-49/64 in (45 mm)

LED FIT

061915

1-49/64 in (45 mm)

29/64 in (10 mm)

9-27/32 in (250 mm)

2 in 7/3 m) 9-2 m 0 5 (2

1-49/64 in (45 mm)

29/64 in (10 mm)

188

TrescoBook_2019.indd 188

1-800-227-1171 | trescolighting.com

6/20/19 5:43 PM

BATTERY

Pulse 40Â°

40 Lumens 189 TrescoBook_2019.indd 189

6/20/19 5:44 PM

Pulse

Donâ&#x20AC;&#x2122;t miss a beat with PULSE! This wireless LED boasts an impressive light output, PIR sensor, multiple mounting options and unsurpassed quality. Its design excellence and ease of installation makes PULSE the perfect solution for illuminating those spaces where traditional wiring is not available.

Integrated motion sensor

Detachable magnetic mounting bracket

Features:

Typical Applications:

Battery operated (8 x AAA included)

Drawers

Integrated motion sensor

Shelves

Easily detachable magnetic mounting bracket

Furniture

Commercial grade 3-year warranty

Closets Interior Cabinets

Available Finishes:

Nickel (NI)

190

TrescoBook_2019.indd 190

1-800-227-1171 | trescolighting.com

6/20/19 5:44 PM

Pulse

Specifications:

Dimensions: Actual Size

Front

3-15/16 in (100 mm)

Wattage

.8W

Lumens

Battery

AAA x 8

Diode Life

20,000 Hours

Mounting

Surface

Warranty

3 Year

Motion Detection Range

79'' (2m)

Motion Detection Angle

120°

“On” Time

10 Seconds

Certifications

Beam Angle

3-15/16 in (100 mm)

40° Photometric Data

Height

Light Output

Beam Area

1ft

59.30Fc

.8ft L x .8ft W

3ft

6.59Fc (70.9lx)

(.7 m L x .7 m W)

6ft

1.65Fc

4.7ft L x 4.6ft W

(.3 m) (.9 m) (1.8 m)

(.2 m L x .2 m W)

(638.2lx)

2.3ft L x 2.3ft W

(17.76lx)

(1.4 m L x 1.4m W) L-HPULSE-CNI Tested

Color Temperature

Side

Warm White

2700K

Warm to Neutral

3000K

Warm (3000K) 5/8 in (16 mm)

4500K

Daylight

5500K

6500K

Cool (5000K)

IES data verified by Underwriters Laboratory

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 191

Cool White

191

6/20/19 5:44 PM

3-15/16 in (100 mm)

Pulse

All product dimensions and specifications are subject to change without prior notice.

Required Items

3-15/16 in (100 mm)

Pulse

Pulse 061915

Part #

Description

L-HPULSE-WNI-1

Battery Powered Pulse light w/ Motion Sensor, 3000K, Nickel

L-HPULSE-CNI-1

Battery Powered Pulse light w/ Motion Sensor, 5000K, Nickel

3-15 /1 (100 6 in mm)

AAA x 8 Batteries included

n 6i 5 /1 m) 3-1 00 m (1

3-15/16 in (100 mm)

5/8 in (16 mm)

3-15/16 in (100 mm)

3-15 /1 (100 6 in mm)

n 6i 5/1 m) 3-1 00 m (1

5/8 in (16 mm)

3-15/16 in (100 mm)

192

TrescoBook_2019.indd 192

1-800-227-1171 | trescolighting.com

6/20/19 5:44 PM

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 193

SNAP LED Panels

193

6/20/19 5:44 PM

Sales Support

30 in (762 mm)

Always have a sample on hand with Tresco Lighting’s new

Sample Product Board Comes with hardware to mount. All product is removable for testing and includes:

3W and 5W Power Pockit® EquiLine Puck Pockit® Spot Pockit® Point FineLine

SimpLED 2.0 Eurolinx T5 LED 6”x6” Etch 6”x6” Snap Part Number: L-WPD2019-1

Infinex profiles chain Fully Assembled Square Infinex FlexTape® samples 24V and 12V power supplies

Price: $300.00/each

Contact your sales representative for details. 194

TrescoBook_2019.indd 194

1-800-227-1171 | trescolighting.com

6/20/19 5:44 PM

Sales Support

Countertop Displays

Option A: EquiLine Tape / Puck

Option B: FineLine / EquiLine Puck

Option C: Premium FlexTape

1.5W 2700K EquiLine Tape LED

FineLine 3000K

1.5W 2700K FlexTape

3W 4800K EquiLine Tape LED

FineLine 5000K

3W 3500K FlexTape

EquiLine Puck 3000K

4.4W 4800K FlexTape

FREEDiM Wireless Micro Dimmer

5.5W 6500K FlexTape FREEDiM Wireless Deco Dimmer

Part Number: L-KDCDA-1

Part Number: L-KDCDB-1

Part Number: L-KDCDC-1

Option D: Premium Variety

Option E: Premium Eurolinx / Pockit®

Option F: Premium SimpLED 2.0 / Pockit®

Eurolinx 3000K

SimpLED 2.0 3000K

SimpLED 2.0 5000K

Eurolinx 5000K

SimpLED 2.0 5000K

3W Power Pockit® 3000K

FREEDiM Wireless Deco Dimmer

Part Number: L-KDCDD-1

Part Number: L-KDCDE-1

Part Number: L-KDCDF-1

$75 each or FREE if you install $500 in Tresco Lighting in your showroom* *Discount credited by Rev-A-Shelf/Tresco upon verification of an installed product in a showroom or display cabinet. Requests must be initiated through your local Rev-A-Shelf/Tresco sales person.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 195

195

6/21/19 8:41 AM

Sales Support

BasicSpecifications Specificationstoto Basic 12VLights Lights Install Tresco®12V Install Tresco ®

a PLUG-IN Power Supply WithWith a PLug-In Power Supply

To control each light individually, use

Option 1.

To control all lights at the same time, use Option 2. Note: Before making final connections, make sure to add up all the wattage of the lights used. Do not exceed the wattage rating of the Power Supply and each Controller.

note: 12VDC plug-in Power Supplies are dimmable on the 12VDC side only.

LegenD:

Select either a 12W, 18W or 60W Power Supply.

(1) Mounting Block is included with each 12W, 18W or 60W Power Supply.

12VDC LED Lights

For example: an 18W Power Supply can power up to (18) 1W Lights or (6) 3W Lights.

Up to (6) Controllers and/ or Lights can plug into (1) Mounting Block.

Select from six different types of Tresco Controllers. 1. Remote Control Dimmers 2. Manual Rotary Dimmer 3. Motion Sensor Controls 4. Photo/Light Sensor Control 5. Touch Dimmer Controls 6. Door Sensor

Power Supply

Option 1:

Mounting Block

Controllers

Tresco Lights

Up to six Controllers plugged into (1) Mounting Block

Power Supply

Mounting Block

Controllers

Tresco Lights

Option 2: One Controller plugged in before the Mounting Block

Power Supply

Controller

Mounting Block

Typical Installation Showing One Controller for All Lights (Linear vs. Puck) 120V Wall Outlet

12VDC Power Supply

Mounting Block

12VDC Power Supply

Mounting Block

12V

Controller

196

TrescoBook_2019.indd 196

Tresco Lights

Side view (Puck Light Install) 120V Wall Outlet

12VDC Power Supply Mounting Block

12V

Controller

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com www.trescolighting.com 6/20/19 5:44 PM

Sales Support

Basic BasicSpecifications Specificationsto to ® 12V Install Tresco Install Tresco 12VLights Lights

To turn all lights on/off at the same time, use a Wall

To control (dim) all lights at the same time, use a Wall Dimmer.

WithaaHArDWIre HARDWIRE Power With Power Supply Supply

120V

Switch.

Note: Before making final connections, make sure to add up all the wattage of the lights used. Do not exceed the wattage rating of the Power Supply.

120V

Wall Switch or LeD Wall Dimmer If using Wall Switch, the Power Supply requires a 50% load. If using Dimmer, the Power Supply requires no minimum load. LED Wall Dimmer 150W maximum capacity.

Dimmable Hardwire Power Supply (60W Max.)

Mounting Block (optional)

Tresco Lights

Dimmable by standard LED Wall dimmers.

Caution: Cannot dim a Receptacle. ThisThis is aispotential hazard and Caution: DO NOT dim a receptacle. a potential hazard cancan cause Lights to flicker as well as damage Powerpower Supply. and cause lights to flicker as well as damage supply.

Typical Hardwire Installation for 12V Pockit® Lights Hardwire 12VDC Mounting Block Power Supply (optional)

Hardwire 12VDC Power Supply

Mounting Block (optional)

red = 120V Wiring Blue = 12VDC Wiring

120V

LegenD:

12V Wall Switch or Wall Dimmer

Wall Switch or Wall Dimmer

Side view (Linear Install)

Typical Hardwire Installation for 12V Linear Lights Hardwire 12VDC Power Supply

Hardwire 12VDC Power Supply

120V 12V Wall Switch or Wall Dimmer 120V

Wall Switch or Wall Dimmer

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 197

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com www.trescolighting.com

197

6/20/19 5:44 PM

Sales Support

HowtotoWire WireaaKitchen Kitchen How 12Vlights Lights withTresco Tresco®12V with ®

Frameless or Framed Cabinets for for Frameless or Framed Cabinets

• To wire a kitchen with Tresco 12V lights, first roughly lay out lighting system to help verify final positioning of all components. Make sure to add up all the wattage of the lighting system. Do not exceed the wattage rating of the Power Supply. If using a Tresco D.I.Y. Controller, do not exceed the wattage of the Controller.

In-Wall Wiring:

For in-wall wiring – typically used for frameless cabinets – use 16-gauge Class 2 wire (minimum) to route wire through kitchen walls (see 1st illustration below). For outside of wall wiring – typically used for framed cabinets – use wires provided with Tresco lighting fixtures with appropriate link and extension leads (LINKD series) that are available in several lengths.

Note: A licensed electrician should be consulted for wiring through walls and other permanent structures. When mounting and wiring a light system, follow all local electric codes and the National Electrical Code (NEC).

Typical for FRaMElESS Cabinets (example installation of 12VDC Linear Lights)

WCON (Barrel Connectors)

Wires that are attached to or accompany Tresco lighting systems are not approved for in-wall use. Class 2 wire must be used (purchased separately). Class 2, 16-gauge wire is the minimum for in-wall applications.

Side view

120V Wall Outlet 12VDC Power Supply

120V Wall Outlet

12V

Red = 120V Purple = Class 2 Wire Blue = 12VdC

WCON (Barrel Connectors)

(above cabinets)

lEgEnd:

12VDC Power Supply

12V

16-gauge Class 2 wire fed inside wall

WCON

12V wire that accompanies Lights

WCON

OuTSIdE of Wall Wiring: Typical for FRaMEd Cabinets

Side view

(example installation of 12VDC Pockit® Lights) Mounting Block

12VDC Power Supply

12V

120V Wall Outlet

(above cabinets)

12VDC Power Supply

Mounting Block

12V

Wires that accompany Tresco lighting fixtures are fed behind or in-between cabinets

length of Wire from Power Supply to Run of lights This is a general guide based on a 60 Watt/5 Amp load: - Recommended maximum length using Class 2, 16-gauge (AWG) wire = 7.6 meters (25 ft.) - Recommended maximum length using links/extensions that accompany Tresco lights = 4.6 meters (15 ft.)

198

TrescoBook_2019.indd 198

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com www.trescolighting.com 6/20/19 5:44 PM

Sales Support

Used.I.Y. D.I.Y.Connectors Connectors use with with Class Class22Wire Wire

ForFor Making Junction Between Making Junction Between In-Wall Wiring & light Fixture Wire In-Wall Wiring & Light Fixture Wire • Wires that are attached to or accompany Tresco lighting systems are not approved for in-wall use. Class 2, 16-gauge wires must be used (purchased separately). Class 2, 16-gauge wire is the minimum for in-wall applications.

Items required for in-wall installation: • (10) Barrel Connectors White . . . . . . . . . . . . . . . . . L-LED-WCON-WH-1 Black . . . . . . . . . . . . . . . . . . L-LED-WCON-BL-1 • Class 2, 16 AWG wire

White, 15.2 m (50 ft.) roll . . . L-16CL2-WH50-1 White, 76.2 m (250 ft.) roll . . L-16CL2-WH250-1

• Small screwdriver

Black, mini slotted . . . . . . . L-MFSCRWDR-1

note: Make sure electrical polarity (positive and negative) is correctly maintained when making junction between Class 2 wire and Light Fixture wire. (+) Red to (+) Red (-) Black to (-) Black Note: Fixture wires are tagged (+) (-) when red- and black-colored wires are not utilized.

WCOn - Barrel Connectors

Class 2 Wire

Class 2 Wire from Power Supply

Wire to Lights

Typical In-Wall Wiring with Kitchen Cabinets (example installation of 12V Linear Lights) 12V WCON (Barrel Connectors)

12VDC Power Supply

16-gauge Class 2 wire routed inside wall around windows, etc.

120V Wall Outlet

(above cabinets)

12V 16-gauge Class 2 wire fed inside wall WCON

Lighting Link Cord

WCON

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 199

WCON

199 2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com www.trescolighting.com 6/20/19 5:44 PM

Sales Support

Understanding Understanding VoltageDrop Drop Voltage

Voltage drop is the amount of electric current lost due to the resistance of the conductors (wires).

® When Installing Tresco 12V Lighting When Installing Tresco 12V Lighting ® Light Series Pockit (Puck) Light Series Pockit(Puck)

On most installations – even larger installations – voltage drop is not an issue, but excessive voltage drop could result in diminished light output. Keeping wire length in mind is a best practice to ensure optimum light performance.

For instance, if specifications recommend that the maximum length from Power Supply to the first Light not exceed 5 meters (16 ft.), the light will still work if you exceed that length! Again the loss is gradual, but an excessive length could result in dimmer light.

• Note: The information provided for measuring voltage drop is a general guide only based on the length of the run and assuming 50% load (30W). Voltage drop goes down with less load and voltage drop goes up with more load. Other factors may influence voltage drop. All measurements and calculations are approximate.

Other factors also influence voltage drop, including the number of connectors, quality of the conductor (aluminum vs. copper wires), and cross-sectional area (gauge).

• In-wall wiring: Wires that are attached to or accompany Tresco lighting systems are not approved for in-wall use. Class 2, 16-gauge (AWG) wires must be used (purchased separately).

All Tresco wires and cords provided are specifically for wiring outside of walls and have a 4.6 meters (15 ft.) maximum length recommendation.

• All Tresco Power Supplies can be applied to the information provided herein on voltage drop.

Ideally, Voltage Drop variance should be within 5%. Absolute maximum should never exceed 8%.

For in-wall wiring, stranded Class 2, 16-gauge wires must be used (purchased separately). Also if needed, lower gauge (which means larger wire) helps reduce voltage drop by lowering overall resistance.

• Recommended maximum length using links/extensions that accompany Tresco lights = 4.6 meters (15 ft.). • Recommended maximum length using Class 2, 16-gauge wire = 7.6 meters (25 ft.).

12V Pockit® Lights (Puck) Example 1:

2.1 m (7 ft.)

-2.3%

Total length of wires

0.3 m (1 ft.)

12V

0.15 m (6 in.)

2 m (79 in.)

0.15 m (6 in.)

Voltage Drop

11.7V #1

120V

Mounting Block

12VDC Power Supply

Cord that comes with light

4 m (13 ft.)

Example 2: 12V

0.15 m (6 in.)

-4.3%

Total length of wires

0.3 m (1 ft.)

Tresco Light

Voltage Drop

3.7 m (12 ft.)

0.15 m (6 in.)

1.8 m (72 in.)

2m (79 in.)

11.5V #2

120V

Mounting Block

12VDC Power Supply

12V

Cord that comes with Tresco Light light

(1) L-LED-LINKD-180

extension cord

-10.3% =

TOTAL Voltage Drop

9.5 m (31 ft.)

Example 3:

Total length of wires

-6% Voltage

-4.3% Voltage 4 m (13 ft.)

12V

0.15 m (6 in.)

1.8 m (72 in.)

Drop from Mounting Block to Light

Drop from

Power Supply to Mounting Block

0.15 m (6 in.)

11.5V

5.5 m (18 ft.) 1.8 m (72 in.)

1.8 m (72 in.)

2m (79 in.)

10.8V #3

120V

12VDC Power Supply

12V

(2) L-LED-LINKD-180

extension cords

Mounting Block

(2) L-LED-LINKD-180

extension cords

Cord that comes with light

Tresco Light

Note: The overall Voltage Drop variance between Light #1 and Light #3 is 8%, which is noticeable.

200

TrescoBook_2019.indd 200

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com www.trescolighting.com

6/20/19 5:44 PM

Sales Support

Understanding Voltage Voltage Drop Drop

Tresco’s longest linking cords are 2 meters (79 in.) which is only a 2% voltage drop – without a noticeable difference in light output. • Note: The information provided for measuring voltage drop is a general guide only based on the length of the run and assuming 50% load (30W). Voltage drop goes down with less load and voltage drop goes up with more load. Other factors may influence voltage drop. All measurements and calculations are approximate.

When WhenInstalling InstallingTresco Tresco®12V 12VLighting Lighting Linear Linkable Series Linear Linkable Series ®

12V Linear Lights Linked in Series Using Link Cords Linear Lights are typically within 1 meter (3 ft.) of each other without a noticeable voltage drop (less than 1%).

Example 1:

-1.3% = TOTAL

1.2 m (4 ft.)

Voltage Drop

Total length of wires

-0.3% Voltage Drop

-0.7% Voltage Drop 12V

120V

0.3 m (1 ft.)

Mounting Block

12VDC Power Supply

0.3 m (1 ft.)

11.9V

from previous Light

0.3 m (1 ft.)

11.9V

Light #2

Light #1

12V

-0.3% Voltage Drop

from previous Light

from Power Supply to Light

0.6 m (2 ft.)

First Voltage Drop is critical to ensure that the start of a run is within 5-8% variance maximum.

11.8V

Light #3

Secondary Voltage Drop is often less critical, since excessive link cord use is not typical.

The total Voltage Drop is 1.3% with a variance between Light #1 and Light #3 of 0.6% which is not noticeable.

Example 2:

-7% = TOTAL

6.4 m (21 ft.)

Voltage Drop

Total length of wires

12V

120V

from Power Supply to Light

0.3 m (1 ft.)

Mounting Block

12VDC Power Supply

-0.3% Voltage Drop

-0.7% Voltage Drop

0.6 m (2 ft.)

12V

11.9V

-6% Voltage Drop

from previous Light

0.3 m (1 ft.)

from previous Light

5.5 m (18 ft.)

11.9V

Light #2

Light #1

11.2V

(3) L-LED-LINKD-180

The total Voltage Drop is 7% with a variance between Light #1 and Light #3 of 6.3% which is not noticeable.

Example 3:

-9% = TOTAL

8.2 m (27 ft.)

Voltage Drop

Total length of wires

3.7 m (12 ft.)

4.0 m (13 ft.)

12V

120V

12VDC Power Supply

Light #3

extension cords

0.15 m (6 in.)

3.7 m (12 ft.)

0.15 m (6 in.)

(2) L-LED-LINKD-180

extension cords

1.8 m (72 in.)

Mounting Block

12V

-8.3% Voltage Drop

from Power Supply to Light

2m (79 in.)

(1) L-LED-LINKD-180

11.0V

0.3 m (1 ft.)

Light #1

-0.3% Voltage Drop from previous Light

11.0V

Light #2

0.3 m (1 ft.)

-0.3% Voltage Drop from previous Light

10.9V

Light #3

extension cord

Voltage Drop to Light #1 is above 5-8% variance. Run of lights will be dimmer than expected. The total Voltage Drop is 9% with a variance between Light #1 and Light #3 of 0.7% which is not noticeable.

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 201

2409 Plantside Dr. • Jeffersontown, KY 40299 201 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com www.trescolighting.com 6/20/19 5:44 PM

Product Index L-16CL2-WH50-1.............. 158, 159 L-1BRL5-1................................. 164 L-24DCELT96-1......................... 164 L-24DCHMGT96-1..................... 164 L-24VDC3INADP-BL-1.............. 164 L-24VDC3INADP-WH-1............. 164 L-ACR6M-1X1-1........................ 119 L-ACR6M-2X2-1........................ 119 L-ACR6M-4X4-1........................ 119 L-ACR6M-4X8-1........................ 119 L-ACR8M-1X1-1........................ 119 L-ACR8M-2X2-1........................ 119 L-ACR8M-4X4-1........................ 119 L-ACR8M-4X8-1........................ 119 L-ADJTKIT-BL-1......................... 50 L-ADJTKIT-NI-1.......................... 50 L-ADJTKIT-WH-1........................ 50 L-CTCL-153P-WH-1.......... 144, 176 L-DB1732-1....................... 150, 159 L-DCE20D-CON-1...........26, 30, 34, 38, 42, 46, 50, 54, 58, 62, 66, 70, 74, 100, 128, 132, 136, 140, 143 L-DCE60D-CON-1...........26, 30, 34, 38, 42, 46, 50, 54, 58, 62, 66, 70, 74, 100, 128, 132, 136, 140, 143 L-DC-ELT12-CON-1............. 26, 30, 34, 38, 42, 46, 50, 54, 58, 62, 66, 70, 74, 100, 128, 132, 136, 140 L-DC-ELT15WP-CON-1....... 26, 30, 34, 38, 42, 46, 50, 54, 58, 62, 66, 70, 74, 100, 128, 132, 136, 140, 144 L-DC-ELT18-CON-1............. 26, 30, 34, 38, 42, 46, 50, 54, 58, 62, 66, 70, 74, 100, 128, 132, 136, 140, 142 L-DC-ELT60-CON-1............. 26, 30, 34, 38, 42, 46, 50, 54, 58, 62, 66, 70, 74, 100, 124, 128, 132, 136, 140, 142 L-DC-ELT6WP-CON-1......... 26, 30, 34, 38, 42, 46, 50, 54, 58, 62, 66, 70, 74, 100, 128, 132, 136, 140, 144 L-DCT-EUPKT-BL-1................. 142 L-DCT-UKPKT-BL-1................. 142 L-DVCL-153P-WH-1.......... 144, 176 L-EUL11W-806CAL-1.................. 82 L-EUL11W-806WAL-1................. 82 L-EUL15W-1111CAL-1................ 82 L-EUL15W-1111WAL-1............... 82 L-EUL3W-197CAL-1.................... 82 L-EUL3W-197WAL-1................... 82 L-EUL4W-273CAL-1.................... 82 L-EUL4W-273WAL-1................... 82 L-EUL7W-502CAL-1.................... 82 L-EUL7W-502WAL-1................... 82 L-EUL-GTD-1.............................. 82 L-EULNK-120-WH-1................... 82 L-EULNK-15-WH-1..................... 82 L-EULNK-180-WH-1................... 82 L-EULNK-25-WH-1..................... 82 L-EULNK-60-WH-1..................... 82 L-EULNK-BTB-GY-1................... 82 L-EUL-UCLP-1............................ 82 L-EXTBTB10-1........................... 111

202

TrescoBook_2019.indd 202

L-FLXTPE-27EER-1.................... 94 L-FLXTPE-27RU-1...................... 89 L-FLXTPE-35EER-1.................... 94 L-FLXTPE-35RU-1...................... 89 L-FLXTPE-48EER-1.................... 94 L-FLXTPE-48RU-1...................... 89 L-FLXTPE-65EER-1.................... 94 L-FLXTPE-65RU-1...................... 89 L-FLXTPE-CRV-1........................ 89 L-FLXTPE-DRV-1........................ 89 L-FLXTPE-NRV-1........................ 89 L-FLXTPE-WRV-1........................ 89 L-FPOC-HWB-ADP-BL..... 170, 176 L-FPOC-HWB-ADP-WH.... 170, 176 L-FPOC-LINKA-120-BL-1.168, 175 L-FPOC-LINKA-120-WH-1.168, 175 L-FPOC-LINKA-180-BL-1.168, 175 L-FPOC-LINKA-180-WH-1.168, 175 L-FPOC-LINKA-25-BL-1... 168, 175 L-FPOC-LINKA-25-WH-1. 168, 175 L-FPOC-LINKA-60-BL-1... 168, 175 L-FPOC-LINKA-60-WH-1. 168, 175 L-HACNT-CNI-1........................ 132 L-HACNT-WNI-1....................... 132 L-HALPHA-CNI-1...................... 184 L-HALPHA-WNI-1..................... 184 L-HECPS-CNI-1........................ 140 L-HECPS-WNI-1........................ 140 L-HFIT-CNI-1............................ 188 L-HMSHDS-BL-1...................... 155 L-HMSHDS-NI-1....................... 155 L-HMSMCU-BL-1...................... 154 L-HMSMS-BL-1......................... 155 L-HMSMS-NI-1......................... 155 L-HMSTD-BL-1......................... 154 L-HMSTD-NI-1.......................... 154 L-HPULSE-CNI-1...................... 192 L-HPULSE-WNI-1..................... 192 L-HREACH-CBL-1..................... 136 L-HREACH-CNI-1...................... 136 L-HREACH-WBL-1.................... 136 L-HREACH-WNI-1..................... 136 L-HSOLO-CNI-1.......................... 58 L-HSOLO-WBL-1......................... 58 L-HSWNG-WBL-1....................... 62 L-HTRICON-NI-1....................... 153 L-HTRISET-1............................. 153 L-HUSB2-BLNI-1...................... 156 L-HWB-BL-T5-1.........170, 176, 180 L-HWB-BL-T5-S-1.....170, 176, 180 L-HWB-WH-T5-1........170, 176, 180 L-HWB-WH-T5-S-1....170, 176, 180 L-LB-LED-CDSK-1...................... 26 L-LB-LED-WDSK-1..................... 26 L-LED-1EB-CBL-1...................... 42 L-LED-1EB-CNI-1....................... 42 L-LED-1EB-CWH-1..................... 42 L-LED-1EB-WBL-1..................... 42

L-LED-1EB-WNI-1...................... 42 L-LED-1EB-WWH-1.................... 42 L-LED-3DSP-CBL-1.................... 46 L-LED-3DSP-CNI-1..................... 46 L-LED-3DSP-WBL-1................... 46 L-LED-3DSP-WNI-1.................... 46 L-LED-AGLPR-1016CAL-1......... 78 L-LED-AGLPR-1016WAL-1......... 78 L-LED-AGLPR-250CAL-1........... 78 L-LED-AGLPR-250WAL-1........... 78 L-LED-AGLPR-406CAL-1........... 78 L-LED-AGLPR-406WAL-1........... 78 L-LED-AGLPR-559WAL-1........... 78 L-LED-AGLPR-711CAL-1........... 78 L-LED-AGLPR-711WAL-1........... 78 L-LED-AGLPR-864WAL-1........... 78 L-LED-DIMCON-BL-1............... 152 L-LED-DIMCON-WH-1.............. 152 L-LED-DIMRMT-12V8A-1......... 151 L-LED-DIMRMT-12V8A-U-1..... 151 L-LED-FLXTPE-BRHO-1............. 89 L-LED-FLXTPE-BROLL-1........... 89 L-LED-FLXTPE-CRHO-1............. 89 L-LED-FLXTPE-CROLL-1........... 89 L-LED-FLXTPE-DRHO-1............. 89 L-LED-FLXTPE-DROLL-1........... 89 L-LED-FLXTPE-NRHO-1............ 89 L-LED-FLXTPE-NROLL-1........... 89 L-LED-FLXTPE-RRHO-1............. 89 L-LED-FLXTPE-RROLL-1........... 89 L-LED-FLXTPE-WRHO-1............ 89 L-LED-FLXTPE-WROLL-1.......... 89 L-LED-LINKD-120-1........... 78, 160 L-LED-LINKD-15-1............. 78, 160 L-LED-LINKD-180-1........... 78, 160 L-LED-LINKD-245-1........... 78, 160 L-LED-LINKD-25-1......78, 124, 160 L-LED-LINKD-60-1......78, 124, 160 L-LED-LINKD-8-1............... 78, 160 L-LED-OVLDS-**....................... 150 L-LED-OVLMS-**...................... 150 L-LED-OVLPS-**....................... 150 L-LED-OVLTD-**....................... 150 L-LED-SMP12-CNI-1.................. 70 L-LED-SMP12-WNI-1................. 70 L-LED-SMP22-CNI-1.................. 70 L-LED-SMP22-WNI-1................. 70 L-LED-SMP8-CNI-1.................... 70 L-LED-SMP8-WNI-1................... 70 L-LED-SMPLNK-120-1......... 70, 74 L-LED-SMPLNK-15-1........... 70, 74 L-LED-SMPLNK-180-1......... 70, 74 L-LED-SMPLNK-25-1........... 70, 74 L-LED-SMPLNK-5-1............. 70, 74 L-LED-SMPLNK-60-1........... 70, 74 L-LED-SMPMOT-1................ 70, 74 L-LED-SMPPHOTO-1............ 70, 74 L-LED-SMPTD4-1................. 70, 74

L-LED-SQPR-1016CAL-1............ 78 L-LED-SQPR-1016WAL-1........... 78 L-LED-SQPR-250CAL-1.............. 78 L-LED-SQPR-250WAL-1............. 78 L-LED-SQPR-406WAL-1............. 78 L-LED-SQPR-559CAL-1.............. 78 L-LED-SQPR-559WAL-1............. 78 L-LED-SQPR-711WAL-1............. 78 L-LED-SQPR-864CAL-1.............. 78 L-LED-SQPR-864WAL-1............. 78 L-LED-STK12-CNI-1................... 66 L-LED-STK12-WNI-1.................. 66 L-LED-STK22-CNI-1................... 66 L-LED-STK22-WNI-1.................. 66 L-LED-STK8-CNI-1..................... 66 L-LED-STK8-WNI-1.................... 66 L-LED-STKDIM-TD4-1................ 66 L-LED-STKLNK-120-1................ 66 L-LED-STKLNK-15-1.................. 66 L-LED-STKLNK-180-1................ 66 L-LED-STKLNK-25-1.................. 66 L-LED-STKLNK-5-1.................... 66 L-LED-STKLNK-60-1.................. 66 L-LED-TPELNK-120-1.......... 90, 94 L-LED-TPELNK-15-1............ 90, 94 L-LED-TPELNK-180-1.......... 90, 94 L-LED-TPELNK-25-1............ 90, 94 L-LED-TPELNK-5-1.............. 90, 94 L-LED-TPELNK-60-1............ 90, 94 L-LED-TPELNK-CON90-1.... 90, 94 L-LED-TPELNK-TEE-1......... 90, 94 L-LED-TPEPKT-2M-1........... 90, 94 L-LED-TPEPKT-2M-TEE-1... 90, 94 L-LED-WCON-BL-1.......... 158, 159 L-LED-WCON-WH-1......... 158, 159 L-LPOC-3W-120L-CBL-1.......... 168 L-LPOC-3W-120L-CNI-1.......... 168 L-LPOC-3W-120L-CWH-1........ 168 L-LPOC-3W-120L-WBL-1......... 168 L-LPOC-3W-120L-WNI-1.......... 168 L-LPOC-3W-120L-WWH-1........ 168 L-LPOC-3W-120NL-CBL-1....... 168 L-LPOC-3W-120NL-CNI-1........ 168 L-LPOC-3W-120NL-CWH-1...... 168 L-LPOC-3W-120NL-WBL-1...... 168 L-LPOC-3W-120NL-WNI-1....... 168 L-LPOC-3W-120NL-WWH-1..... 168 L-LPOC-3WA-CBL-1................. 168 L-LPOC-3WA-CNI-1.................. 168 L-LPOC-3WA-CWH-1................ 168 L-LPOC-3WA-WBL-1................ 168 L-LPOC-3WA-WNI-1................. 168 L-LPOC-3WA-WWH-1............... 168 L-LT514W-904C*-5................... 180 L-LT514W-904D*-5................... 180 L-LT514W-904W*-5.................. 180 L-LT518W-1204C*-5................. 180 L-LT518W-1204D*-5................. 180

1-800-227-1171 | trescolighting.com

6/20/19 5:44 PM

L-LT518W-1204W*-5................ 180 L-LT525W-1504C*-5................. 180 L-LT525W-1504D*-5................. 180 L-LT525W-1504W*-5................ 180 L-LT53W-267C*-5..................... 180 L-LT53W-267D*-5..................... 180 L-LT53W-267W*-5.................... 180 L-LT54W-343C*-5..................... 180 L-LT54W-343D*-5..................... 180 L-LT54W-343W*-5.................... 180 L-LT57W-571C*-5..................... 180 L-LT57W-571D*-5..................... 180 L-LT57W-571W*-5.................... 180 L-LT5-HWBADP-**-1................ 180 L-LT5-LNK120-BL-1................. 180 L-LT5-LNK120-WH-1................ 180 L-LT5-LNK15-BL-1................... 180 L-LT5-LNK15-WH-1.................. 180 L-LT5-LNK180-BL-1................. 180 L-LT5-LNK180-WH-1................ 180 L-LT5-LNK25-BL-1................... 180 L-LT5-LNK25-WH-1.................. 180 L-LT5-LNK60-BL-1................... 180 L-LT5-LNK60-WH-1.................. 180 L-MAG-AEUL13-**-1................ 124 L-MAG-AEUL17-**-1................ 124 L-MAG-AEUL25-**-1................ 124 L-MAG-AEUL6-**-1.................. 124 L-MAG-ALNK13-**-1................ 124 L-MAG-ALNK17-**-1................ 124 L-MAG-ALNK25-**-1................ 124 L-MAG-ALNK6-**-1.................. 124 L-MAG-ASMP13-**-1................ 124 L-MAG-ASMP17-**-1................ 124 L-MAG-ASMP25-**-1................ 124 L-MAG-ASMP6-**-1.................. 124 L-MAG-ASTK13-**-1................. 124 L-MAG-ASTK17-**-1................. 124 L-MAG-ASTK25-**-1................. 124 L-MAG-ASTK6-**-1.................. 124 L-MAG-CSPPT-1....................... 124 L-MAG-CSPPT-WH-1................ 124 L-MAG-ECP-PWR-1.................. 124 L-MAG-ECP-PWR-WH-1.......... 124 L-MAG-TR-1M-CH-1................. 124 L-MAG-TR-1M-WH-1................ 124 L-MAG-TR-2M-CH-1................. 124 L-MAG-TR-2M-WH-1................ 124 L-MALE-AMP............................ 160 L-MALE-AMP-10-1................... 159 L-MFSCRWDR-1....................... 159 L-MPOC-4W-120L-CBL-1......... 174 L-MPOC-4W-120L-CNI-1......... 174 L-MPOC-4W-120L-CWH-1....... 174 L-MPOC-4W-120L-WBL-1........ 174 L-MPOC-4W-120L-WNI-1......... 174 L-MPOC-4W-120L-WWH-1....... 174 L-MPOC-4W-120NL-CBL-1...... 174 L-MPOC-4W-120NL-CNI-1....... 174 L-MPOC-4W-120NL-CWH-1..... 174

L-MPOC-4W-120NL-WBL-1..... 174 L-MPOC-4W-120NL-WNI-1...... 174 L-MPOC-4W-120NL-WWH-1.... 174 L-MPOC-PKT8-BL-1................. 174 L-MPOC-PKT8-WH-1................ 174 L-P1SCRWDR-1........................ 159 L-PANELKIT-DO1...................... 120 L-PANELKIT-DO2...................... 120 L-PINEXT-1........................ 159, 160 L-POC-1LEDSFR-CBL-1............. 30 L-POC-1LEDSFR-CNI-1.............. 30 L-POC-1LEDSFR-CORB-1.......... 30 L-POC-1LEDSFR-CWH-1............ 30 L-POC-1LEDSFR-WBL-1............ 30 L-POC-1LEDSFR-WNI-1............. 30 L-POC-1LEDSFR-WORB-1......... 30 L-POC-1LEDSFR-WWH-1........... 30 L-POC-3EQFR-CBL-1................. 54 L-POC-3EQFR-CNI-1.................. 54 L-POC-3EQFR-WBL-1................ 54 L-POC-3EQFR-WNI-1................. 54 L-POC-3LEDSFR-CAB-1............. 34 L-POC-3LEDSFR-CBL-1............. 34 L-POC-3LEDSFR-CCH-1............ 34 L-POC-3LEDSFR-CNI-1.............. 34 L-POC-3LEDSFR-CWH-1............ 34 L-POC-3LEDSFR-WAB-1............ 34 L-POC-3LEDSFR-WBL-1............ 34 L-POC-3LEDSFR-WCH-1............ 34 L-POC-3LEDSFR-WNI-1............. 34 L-POC-3LEDSFR-WORB-1......... 34 L-POC-3LEDSFR-WWH-1........... 34 L-POC-5ADJ-C-1......................... 50 L-POC-5ADJ-W-1........................ 50 L-POC-5LEDSCL-CBL-1............. 38 L-POC-5LEDSCL-CNI-1.............. 38 L-POC-5LEDSCL-CWH-1............ 38 L-POC-5LEDSCL-WBL-1............ 38 L-POC-5LEDSCL-WNI-1............. 38 L-POC-5LEDSCL-WORB-1......... 38 L-POC-5LEDSCL-WWH-1........... 38 L-POC-LED-CAB-M-1................. 26 L-POC-LED-CBL-M-1................. 26 L-POC-LED-CCH-M-1................. 26 L-POC-LED-CNI-M-1.................. 26 L-POC-LED-CWH-M-1................ 26 L-POC-LED-WAB-M-1................ 26 L-POC-LED-WBL-M-1................ 26 L-POC-LED-WCH-M-1................ 26 L-POC-LED-WNI-M-1................. 26 L-POC-LED-WWH-M-1............... 26 L-RDSW-1M-120-BL-1..... 169, 174 L-RDSW-1M-120-WH-1.... 169, 174 L-RDSW-1M-BL-1..................... 152 L-RDSW-1M-WH-1.................... 152 L-RDSW-2M-120-BL-1..... 169, 174 L-RDSW-2M-120-WH-1.... 169, 174 L-RDSW-2M-BL-1..................... 152 L-RDSW-2M-WH-1.................... 152 L-SMPHO12-CNI-1...................... 74

L-SMPHO12-WNI-1..................... 74 L-SMPHO22-CNI-1...................... 74 L-SMPHO22-WNI-1..................... 74 L-SMPHO8-CNI-1........................ 74 L-SMPHO8-WNI-1....................... 74 L-SMR-2LED-BL-1...................... 54 L-SMR-2LED-NI-1...................... 54 L-SP15WA-30K-1...................... 164 L-SP15WA-40K-1...................... 164 L-SP15WA-50K-1...................... 164 L-SP15WA-65K-1...................... 164 L-SP8WA-30K-1........................ 164 L-SP8WA-40K-1........................ 164 L-SP8WA-50K-1........................ 164 L-SP8WA-65K-1........................ 164 L-SP90BTB4-1........................... 164 L-SPACER-AB-M-1..................... 26 L-SPACER-BL-M-1..................... 26 L-SPACER-CH-M-1..................... 26 L-SPACER-NI-M-1...................... 26 L-SPACER-WH-M-1.................... 26 L-SPBTB10-1............................ 164 L-SPCLP6-1............................... 164 L-SPEXT-1M-1.......................... 164 L-SPEXT-2M-1.......................... 164 L-SPEXT-3M-1.......................... 164 L-SPLNK120-1.......................... 164 L-SPLNK25-1............................ 164 L-SPLNK60-1............................ 164 L-SPLNK8-1.............................. 164 L-SPPKT-1M-1.......................... 164 L-SPPKT-305MM-1................... 164 L-SPPKT-3M-1.......................... 164 L-STKAUCLP-NI-1...................... 66 L-STX-BLNK-BL-1.................... 128 L-STX-BLNK-NI-1..................... 128 L-STX-LITE-CBL-1.................... 128 L-STX-LITE-CNI-1..................... 128 L-STX-LITE-WBL-1................... 128 L-STX-LITE-WNI-1.................... 128 L-STX-SKIT-CBL-1.................... 128 L-STX-SKIT-CNI-1..................... 128 L-STX-SKIT-WBL-1................... 128 L-STX-SKIT-WNI-1.................... 128 L-TOOLKIT-1............................. 159 L-TPE6-12IN-**K-1.................. 119 L-TPE6-24IN-**K-1.................. 119 L-TPE6-48IN-**K-1.................. 119 L-TPE6-96IN-**K-1.................. 119 L-TPELED-27HER-1.................. 100 L-TPELED-27SER-1.................. 100 L-TPELED-27VER-1.................. 100 L-TPELED-35HER-1.................. 100 L-TPELED-35SER-1.................. 100 L-TPELED-35VER-1.................. 100 L-TPELED-48HER-1.................. 100 L-TPELED-48SER-1.................. 100 L-TPELED-48VER-1.................. 100 L-TPELED-65HER-1.................. 100 L-TPELED-65SER-1.................. 100

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 203

L-TPELED-65VER-1.................. 100 L-TPELNK-BTB-1................. 90, 94 L-TPEPKT-2IN-1................... 90, 94 L-TRANS-MNT-BL-1........ 142, 159 L-TRS5-UCLP-M-1.................... 180 L-TS2-72-1.................151, 169, 175 L-USB-120VP-1......................... 184 L-VHBTPE-1134-1......124, 159, 160 L-VHBTPE-15FT-1.................... 160 L-WCLP-WH-1.......................... 159 L-WLD-1REC-1..146, 147, 148, 149 L-WLD-1RND-BL-1................... 148 L-WLD-1RND-NI-1................... 148 L-WLD-1WAL-**-1.................... 147 L-WLD-2WAL-**-1.................... 147 L-WLD-3RMT-BL-1................... 149 L-WLD-6RMT-BL-1................... 149 L-WM5-BL-1.............................. 158 L-WM5-BR-1............................. 158 L-WM5-WH-1............................ 158 L-X72-DBF-1............................. 110 L-X72-DIFF-CL-1...................... 110 L-X72-DIFF-FR-1...................... 110 L-X72-DIFF-MLK-1................... 110 L-XANG72-**-1......................... 110 L-XANG72-SC-1........................ 110 L-XANGECP-**-1...................... 110 L-XANGECP-GY-1..................... 110 L-XCRV72-**-1.......................... 110 L-XCRV72-SC-1......................... 110 L-XCRVECP-**-1....................... 110 L-XCRVECP-GY-1...................... 110 L-XLNK-120-**-1...................... 111 L-XLNK-15-**-1........................ 111 L-XLNK-180-**-1...................... 111 L-XLNK-25-**-1........................ 111 L-XLNK-60-**-1........................ 111 L-XPKT-2IN-BL-1..................... 111 L-XPKT-2IN-WH-1.................... 111 L-XPKT-2M-BL-1...................... 111 L-XPKT-2M-WH-1..................... 111 L-XREC72-BL-1......................... 110 L-XREC72-SC-1......................... 110 L-XRECECP-BL-1...................... 110 L-XRECECP-GY-1...................... 110 L-XRM42-155-1................. 111, 124 L-XRND72-BL-1........................ 110 L-XRND72-SC-1........................ 110 L-XRNDECP-BL-1..................... 110 L-XRNDECP-GY-1..................... 110 L-XRND-UCLP-1....................... 111 L-XSQR72-**-1.......................... 110 L-XSQR72-SC-1......................... 110 L-XSQRECP-**-1....................... 110 L-XSQRECP-GY-1...................... 110 L-XSQRSWCLP-1...................... 111 L-XSQR-UCLP-1........................ 111

203

6/20/19 5:44 PM

1-800-227-1171 | trescolighting.com

TrescoBook_2019.indd 204

6/20/19 5:44 PM