Tresco Specification Guide - 2021 by Rev-A-Shelf

2021

Lighting Specification Guide

1-800-227-1171 | trescolighting.com

Table of Contents

12VDC

About Us.........................................................................11

Puck Lighting.............................................................. 24 12VDC Pockit® Plus 1.5W................................................................................26 Power Pockit® 3W...............................................................................28 Power Pockit® 5W...............................................................................30 Pockit® Point.........................................................................................32 Pockit® Spot..........................................................................................34 Pockit® Adapt........................................................................................36 3W EquiLine Puck................................................................................38 120V Pockit® 120-M.....................................................................................40

Linear Lighting...........................................................48 12VDC FineLine 2.0...........................................................................................50 SimpLED 2.0.......................................................................................... 52 Eurolinx...................................................................................................54 Elli® Series............................................................................................. 56 EquiLine SimpLED...............................................................................58 EquiLine FineLine................................................................................60 120V T5 Trescent® LED.................................................................................62

24VDC

120V

Battery

12VDC 12VDC RGB Balance Tunable FlexTape®......................................96 24VDC 24VDC RGB Balance Tunable FlexTape®.....................................98 24VDC RGB Standard Tunable FlexTape®.................................100

Extrusions..................................................................105

Infinex....................................................................................................106

Panel Lighting........................................................... 118

12VDC Etch........................................................................................................ 120 24VDC Snap.......................................................................................................128

Single Color Tape Lighting...................................... 70

12VDC FlexTape®............................................................................................... 72 Edge Emitting FlexTape®..................................................................78 EquiLine Tape LED............................................................................... 79 12VDC COB FlexTape®........................................................................82 24VDC 24VDC COB FlexTape®.......................................................................84

Specialty Series........................................................133 12VDC Stax........................................................................................................134 Ascent.................................................................................................... 136 12VDC Dual USB Charging Station...............................................138

Components.............................................................. 141 Power Supplies..................................................................................142 Controllers........................................................................................... 150 Install Accessories............................................................................164

Battery........................................................................ 168 Battery Alpha...................................................................................................... 170 Fit............................................................................................................. 171

Sales Support on page 174

Tunable Tape Lighting............................................... 91

12VDC 12VDC White Tunable FlexTape®....................................................92 24VDC 24VDC White Tunable FlexTape®...................................................94

For overview and installation videos on many of our products visit: trescolighting.com/videos

1-800-227-1171 | trescolighting.com

COMPLIMENTARY COMPLIMENTARY

LIGHTING LAYOUT SER

COMPLIMENTARY

Layout Design Services

The increasingly popular application of LED lighting is new to many design professionals. Let our Lighting Layout Assistance Program guide you in specifying the ideal product and wiring schematic for your next residential or commercial project.

trescolighting.com/layout trescolighting.com/layout

HOW HOW IT IT WORKS WORKS

Typical Setup:

Visit: Visit: trescolighting.com/layout trescolighting.com/layout

Fill out the form & upload Fill out thedrawings. form & upload your your drawings.

PLIMENTARY

AYOUT SERVICES http://www.trescolighting.com/lighting-layout-request/

http://www.trescolighting.com/lighting-layout-request/

hting.com/layout LIGHTING LAYOUT REQUEST

LIGHTING LAYOUT REQUEST

LIGHTING LAYOUT REQUEST XXXXXX

XXXXXXXX XX

XXXXXX XXXX

XXXXXXXX XX XXXXXX XX XX

XXXX XX XX XXXXXX

XXXXXX XX XX XXXXXX

XXXXXX XX XXXXXXXX XXXX

XXXXXX

XXXXXXXX XXXXXXXX XXXX

SUBMIT

XXXXXXXX XX

SUBMIT

Receive your professionally the form & upload Visit: trescolighting.com/layout Fill out the form and upload your drawings. engineered schematic and ur drawings. matching parts list.

out-request/

LIGHTING PAR

TS LIST

XXXXXXXX X

XXXXXX XXXXXXXXX XXXXXXXXX

UEST

X X X

XXXXXXXX XX XXXXXX XX XX XXXXXX

SUBMIT

Receive your professionally engineered schematic and matching parts list.

GET STARTED

TODAY

trescolighting.com/layout 1-800-227-1171 | trescolighting.com

Receiv Receiv engine engin ma m

Product Information

Product Color Finishes Tresco's lighting products are available in eight standard color finishes: White, Black, Chrome, Gold, Nickel, Antique Brass, Aluminum and Oil-Rubbed Bronze. Please refer to the individual Product Sections for color availability of each product.

White (WH)

Black (BL)

Chrome (CH)

Gold (GD)

Nickel (NI) (Brushed)

Antique Brass (AB)

Aluminum (AL) (Mill)

Oil-Rubbed Bronze (ORB)

ETL ,UL, and QPS-Testing, Inspection and Certification • • • • •

ETL is the largest worldwide UL is the largest in the USA Both are Nationally Recognized Testing Laboratories (NRTL) as recognized by OSHA Both are recognized by local inspectors throughout North America No mark is better than the other

Tresco Products Tested and Certified for Canada and the United States ETL or UL marks serve as proof of product compliance to Canadian and U.S. standards. When products bear these marks, this indicates to the consumer that the products have passed a complete and thorough set of tests and certification requirements. All TRESCO® lighting systems carry UL, ETL or QPS safety certifications. In addition, a majority of our individual lighting components (lights, power supplies, and accessories) are also registered and certified by ETL and/or UL.

UL's Recognized Component Mark The UL Recognized Component Mark is used on components that are a part of larger products or systems. It is certified by UL to both Canadian and U.S. requirements.

CE Mark CE Marking permits a product to be sold throughout the European Union. It is a conformity mark noting the product complies with all applicable European Directives.

* The ETL Mark is a registered trademark of Intertek. The UL Mark and Recognized Component Mark are registered trademarks of Underwriters Laboratories Inc. All product dimensions and specifications are subject to change without prior notice.

1-800-227-1171 | trescolighting.com

Lighting 101

Diode Life: LEDs fade as opposed to abruptly burning out. "End of Life" refers to the number of hours until the LED has completely faded out, although it will have been too dim to use for many hours leading up until that point. "Useful Life", on the other hand, refers to the number of hours until the LED reaches 70% of its initial light output, which is a much more practical indicator for the consumer (defined as L70).

Color Consistency: LEDs, as a natural result of the manufacturing process, have inconsistent color from one diode to the next. Top brand LED suppliers, like the ones used by Tresco, combat this by means of a process known as "binning" - inspecting each individual diode and matching them to ensure consistency.

50,000 Hours = 17 Years (8 hours a day)

End of Useful Life

Tresco:

Cheap LEDs:

Lumen Output: Lumen is the measure of visible light output emitted from a fixture. For under cabinet lighting, where the goal is to illuminate a workspace to perform specific tasks, the brighter, the better. For soffit, toe kick or other accent lighting, a moderate output is better.

TASK:

150+ LUMENS UNDER 150 LUMENS

ACCENT:

Beam Spreads: Using puck lights with tight beam spreads under wall cabinets can create unsightly dark spots on the backsplash between lights. Beam spreads of 90 degrees or greater will reduce the dark spots. For spotlight applications, such as in-cabinet or display lighting, a beam spread of 20-40 degrees is desirable.

1-800-227-1171 | trescolighting.com

TASK:

90°+

SPOT:

20-40°

Color temperature is the rating a particular color renders on the Kelvin scale. These color temperatures alter how an object or room is perceived when illuminated, and Tresco offers a wide range to choose from. To find the appropriate color temperature for your application, please reference the table below:

Color Temperature

Warm White

Warm to Neutral

Cool White

Tresco Standard

2700K

3000K

Daylight

Tresco Standard

3500K

4500K

5000K

5500K

6500K

2700K Warm White

3000K Warm White

3500K Warm to Neutral

Recommended for Earth Tones Mimics Incandescent Highlights Wood Grains Primarily for Residential Use Not Recommended for White

Recommended for Earth Tones Slightly "Whiter" Than Incandescent Highlights Wood Grains Primarily for Residential Use Not Recommended for White

Transitional Between Warm and Cool Will Equally Highlight Earth Tones and Cool Tones Recommended for Residential and Commercial Use Will Give White an Off-White Look

6500K Daylight

5000K Cool White Highlights Whites/Blue/CoolTones Primarily For Commercial Use Recommended for White Not Recommended for Wood Grain/Earth Tones

Has Bluish Tint (Sky Color) Primarily Used for Backlighting/Signs Not Recommended for Residential Use

1-800-227-1171 | trescolighting.com

What is Luniform?

"Dotted" appearance

luniform (loo-nuh-fawrm) n. The technology to eliminate "dotted" appearances and reduce unwanted glare within light emitting diode fixtures.

Luniform

Eurolinx

Secondary Optics Secondary optics are lighting components uniquely designed to diffuse LED diodes and reduce glare, such as special lenses and proprietary films.

Diode Technology

Diode technology allows for up to 10X the amount of LED diodes on a single circuit board or substrate, resulting in greater light output and a uniform beam spread.

Power Pockit® 5W

1-800-227-1171 | trescolighting.com

Who We Are

Leader in LED Lighting Tresco® Lighting is the leader in premiere lighting solutions for store fixtures, commercial applications, residential cabinetry, laboratory and hospitality furniture. With over 30 years of "Innovation Through Illumination" we proudly design and manufacture a full line of superior quality LED lighting options that are UL/ETL listed. Tresco® Lighting is the trusted brand for all your project needs. Tresco® was founded in 1989 to meet a growing demand for quality cabinet and casework lighting. In 1992, we designed and offered the first UL-listed, under cabinet track lighting system in North America. This ingenuity and success led to the rapid development and expansion of product lines targeting different segments of business. 30 years later, our goal remains the same: Provide innovative, functional and design savvy products for the office, laboratory, hospitality, furniture, store fixture, millwork and kitchen industries. We welcome you to browse our catalog and learn more about our company and product offering.

The Company We Keep We are members in good standing with the most respected names in the business. Our customers can be confident that they're dealing with a professional, reputable, and reliable leader in the LED lighting industry.

Kentuckiana Chapter

1-800-227-1171 | trescolighting.com

Kentuckiana Chapter

Who We Are

History 1989 Tresco® International opens operations 1993 Launched first product - Under Cabinet Track System UL issues first safety listing ever for a non-wall or ceiling track system to Tresco® 1996 Launched Lumaflex, one of the first rope lighting systems in the USA 2000 Chris Tress joins Tresco® and becomes general manager

Tresco® International launches first product. (Halogen Track Light, 1993)

2003 Construction on a modern facility begins that doubles our size 2008 Patent issued for Elli® Linkable Light System 2009 Patent issued for Modular Light Rail Light System 2010 Patent issued for iMAGine® Shelf Light System 2011 Tresco® acquired by Rev-A-Shelf®, LLC 2013 Patent issued for SimpLED Linear LED System 2014 Construction of new 300,000 square foot building

First of many U.S. patents awarded to Tresco®. (Elli® Series, 2008)

2015 Introduced Infinex, a custom extrusion lighting solution 2016 Introduced FREEDiM Series of wireless controllers 2017 Patents issued for Infinex extrusion system and FREEDiM wireless controllers 2017 Snap panel lighting wins KBIS "Best of Show" 2019 Patent issued for Etch panel

Tresco® launches new Luniform LED Technology. (SimpLED 2.0, 2014)

1-800-227-1171 | trescolighting.com

What We Do

Linear Lighting Tresco® linear or "strip" lights are available in a range of styles, price points, outputs, and color temperatures.

Pockit® Lighting Tresco Pockit® or "puck" lights are available in a variety of configurations. Large or small, spot or accent, metal or plastic, linkable or non-linkable, Tresco® has a "Pockit®" light for you.

Panel Lighting Take your designs to new levels with panel lighting. From countertops and shelves to artwork and signs, backlighting provides both decorative and utility lighting in one application.

Flexible Lights With Tresco®'s FlexTape®, you can have the flexibility you need without sacrificing the quality you demand. Whether Backlighting a sign, edge lighting a display, or accent lighting Air Force One, Tresco®'s line of flexible lights are all you need.

1-800-227-1171 | trescolighting.com

What We Do

Store Fixtures Tresco® products are the perfect addition to your store fixture lighting. If we don't stock what you need, we can custom design it for you. Tresco® Lighting is the solution.

Commercial Furniture

Hospitality

From desks to shelves, high quality Tresco® Lighting products provide ideal lighting for the office at a low price.

Whether the relaxing glow of a hotel room or the inviting radiance of a restaurant, lighting is an essential part of our lives and especially important when creating an atmosphere. Tresco® is here to help you create an enjoyable guest experience, accentuate your brand, and save you money.

1-800-227-1171 | trescolighting.com

What We Do

Residential Cabinets Adding lighting to your residential cabinetry is easier than ever with Tresco® Lighting. Our standard power supply and connectors work with the entire line of LED lighting — no more trying to find what connector works with what power supply. Tresco® Lighting is easy as 1-2-3.

Institutional

Residential Furniture

Warrantied, safety tested, and built to withstand demanding environments, Tresco® products are ideal for institutional locations. Whatever your application, our lights provide optimum task visibility at a minimal operational cost for cafeterias, libraries, hospitals, or laboratories.

Incorporating lighting into your furniture raises the bar on the consumer experience for your brand. Worried about safety? So are we. That is why Tresco® Lighting products are UL or ETL listed.

1-800-227-1171 | trescolighting.com

Why Choose Us

1-800-227-1171 | trescolighting.com

Why Choose Us

Quality Superior components ensure Tresco® lights are brighter and wider light spread than the competition. We use world-renowned suppliers who employ static and dust-free clean rooms, proper binning, and use of high-grade phosphors to achieve efficiency, high lumen, and color consistency. When it comes to LED, the diode makes the difference. That is why we use brands like Nichia and Cree.

Independent Testing We don't just say our lights are better — we prove it. Independent testing certification available for TM21, LM80, and LM79 photometrics to provide specification charts. Charts are printed next to our lights for proper specification of our products.

Safety Listings At Tresco®, safety is a top priority. All of our products carry UL, ETL or QPS safety certifications for the United States and Canada. CE marking permits a product to be sold throughout the European Union. It is a conformity mark noting the product complies with all applicable European directives.

1-800-227-1171 | trescolighting.com

Why Choose Us

We Make Lighting Easy Easy as 1 - 2 - 3. 1) Universal power supply 2) Controller connects to the power supply 3) Light fixture connects to the controller

In-House Design We are not your typical lighting company. From art to part, we design and manufacture custom lighting solutions based on your specific needs.

Universal System Tresco®'s in-house design and manufacturing teams create LED lights to work with one power source. Other products require different power supplies for different lights, but Tresco®'s LED lights are designed to work with a single 12VDC or 24VDC power supply. No more wiring nightmares.

Luniform Luniform is the technology to eliminate "dotted" appearances and reduce unwanted glare within light emitting diode fixtures. See Page 10 for more information.

Direct Sales Representative Independent Sales Representative

Distribution Network Tresco® products are stocked with over 100 distributors in North America, giving you same day or next day delivery.

OEM Network Our OEM network includes some of the largest and most respected manufacturers in the business. This helps us achieve economies of scale that result in cost savings for you.

Our Team Representatives from the Tresco® Lighting Sales and Customer Service teams are in the field and ready to help you find the right product for your application.

1-800-227-1171 | trescolighting.com

12VDC

120V

PUCK

1-800-227-1171 | trescolighting.com

12VDC

115 Lumens

1.5W

Pockit Plus 1.5W

90°

Pockit® Plus features clean and simple lines PLUS cutting-edge bulb technology that provide powerful, bright light without the energy consumption and heat. Performance and effortless installation for recess or surface mounting all at a competitive price – that’s the power of PLUS.

Features: Slim Profile – 1/4“ (6 mm) 90° beam spread Durable milled aluminum construction Recess or surface mount Typical Applications: Displays Mid-level flood light Interior cabinets Under cabinets

Available Finishes:

POC 3W Metal Surface Mount Ring

011510

2-1/2” (63 mm) Black (BL)

Nickel (NI)

Oil-Rubbed Bronze (ORB)

White (WH)

2-1/2” (63 mm)

Dimensions:

Thin profile: Just 1/4" (6 mm) depth when recessing 3/8" (9.5 mm) when surface mounting

1/4” (6 mm)

79” (2 m) 2-1/4” (57 mm) 3/8” (10 mm)

2-1/2” (63 mm)

Mounting Ring

POC 3W Metal Surface Mount Ring 1/4” (6 mm)

Surface mount ring included

011510

79” (2 m) 2-1/4” (57 mm)

2-1/2” (63 mm)

Available in 4 finishes, with clear lens

Thru-way for wire exit

3/8” (10 mm) Mounting Ring

1-800-227-1171 | trescolighting.com

Thru-way for wire exit

3/8” (9 mm) Thru-way for wire exit

Pockit® Plus 1.5W Typical Setup: Pockit® Plus 1.5W

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Starter Cord / Link Cords see pg. 165 under starter extension cords

Controllers see controller section

Power Supplies see power supply section

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

Beam Angle

1.5W

115

12VDC

25,000 Hours

40 Fixtures

Recess/ Surface

3 Year

90°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

44.50Fc

2.5ft L x 2.5ft W

3ft

4.95Fc (53.3lx)

(2.3 m L x 2.3 m W)

6ft

1.24Fc

15.2ft L x 15.2ft W

(.3 m) (.9 m) (1.8 m)

(479lx)

(13.3lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.8 m L x .8 m W)

7.6ft L x 7.6ft W

2700K

(4.6 m L x 4.6 m W)

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-POC-1LEDSFR-C Tested

See page 42 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

Power Pockit® 3W

12VDC

234 Lumens

120°

The Power Pockit® 3W is a versatile choice offering flood and task lighting that can be used for interior cabinets, under cabinets and store displays. This 3W energy efficient LED provides a crisp, uniform wash over illuminated objects.

Features: Slim Profile – 1/4“ (6 mm) Wide 120° beam spread High output (234 lumens) Luniform output – no “dots” Durable milled aluminum construction Recess or surfaceMetal mountPuck

Body – POC-3W

011510

Typical Applications: Displays Store fixtures

2-1/2”

Interior/under cabinets(63 mm) Task lighting Closets (UL listed for use within closet storage spaces) 5 YEAR

COMMERCIAL GRADE W

POC 3W Metal Surface Mount Ring Available Finishes:

Antique Brass (AB) Black (BL)

Chrome (CH) 2-1/2” (63 mm)

Nickel (NI)

Oil-Rubbed Bronze (ORB)

RA N T

011510

White (WH)

Dimensions: Thin profile: Just 1/4" (6 mm) depth when recessing 3/8" (9.5 mm) when surface mounting

Metal Puck Body – POC-3W(61/4” mm)

79” (2 m)

011510

2-1/4” (57 mm) 2-1/2” (63 mm)

POC 3W Metal Surface Mount Ring

Available in multiple finishes with milk lens

Recess or surface mount

2-1/2” (63 mm)

1-800-227-1171 | trescolighting.com

011510

3/8” (9 mm) Thru-way for wire exit

Power Pockit® 3W Typical Setup:

Power Pockit® 3W

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Starter Cord / Link Cords see pg. 165 under starter/ extension cords

Controllers see controller section

Power Supplies see power supply section

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

Beam Angle

234

12VDC

50,000 Hours

20 Fixtures

Recess/ Surface

5 Year

120°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

81.30Fc

3.1ft L x 3.1ft W

3ft

9.03Fc (97.2lx)

(2.8 m L x 2.8 m W)

6ft

2.26Fc

18.4ft L x 18.4ft W

(.3 m) (.9 m) (1.8 m)

(875.1lx)

(24.3lx)

Warm White

Warm to Neutral

Cool White

Daylight

(1 m L x 1 m W)

9.2ft L x 9.2ft W

2700K

(5.6 m L x 5.6 m W)

3000K

Warm Neutral (3000K) (3500K)

4500K

5500K

6500K

Cool (5000K)

L-POC-3LEDSFR-C Tested

See page 42 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

Power Pockit® 5W

12VDC

290 Lumens

100°

The next generation of Power Pockit® is an astounding 25% more output than our original industry leading 3W version. With Luniform technology, 290 lumens of light are evenly distributed and eliminate the "dotted" appearance on surfaces. At only 1/4" (6 mm) depth, the Power Pockit® 5W has the the maximum illumination required in a small package.

Features: Slim Profile – 1/4“ (6 mm) Wide 100° beam spread High output (290 lumens) Luniform output – no “dots”

Metal Puck Body – Durable milled aluminum construction

POC-3W

011510

Recess or surface mount Typical Applications: 2-1/2”

Displays or store furniture (63 mm) Task or flood lighting Interior cabinets/shelving Under cabinets 5 YEAR

COMMERCIAL GRADE W

RA N T

Available Finishes: POC 3W Metal Surface Mount Ring

Black (BL)

Thin profile: Just 1/4" (6 mm) depth when recessing 3/8" (9.5 mm) when surface mounting

Nickel (NI)

011510

2-1/2” White (WH) Oil-Rubbed (63 mm) Bronze (ORB)

Metal Dimensions: Puck Body – POC-3W

1/4” (6 mm)

011510

79” (2 m) 2-1/4” (57 mm)

2-1/2” (63 mm)

POC 3W Metal Surface Mount Ring

2-1/2” (63 mm)

Available in multiple finishes with clear lens

Recess or surface mount

1-800-227-1171 | trescolighting.com

011510

3/8” (9 mm) Thru-way for wire exit

Power Pockit® 5W Typical Setup:

Power Pockit® 5W

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Starter Cord / Link Cords see pg. 165 under starter/ extension cords

Controllers see controller section

Power Supplies see power supply section

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

Beam Angle

290

12VDC

50,000 Hours

12 Fixtures

Recess/ Surface

5 Year

100°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

115.90Fc

2.4ft L x 2.5ft W

3ft

12.88Fc (138.6lx)

(2.2 m L x 2.3 m W)

6ft

3.22Fc

14.6ft L x 14.8ft W

(.3 m) (.9 m) (1.8 m)

(1247.5lx)

(34.7lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.73 m L x .76 m W)

7.3ft L x 7.4ft W

2700K

(4.5 m L x 4.5 m W)

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-POC-5LED-C Tested

See page 43 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

(30 mm) 1/2” (13 mm)

12VDC

1” (25 mm)

Pockit Point

69 Lumens

90°

1W Pockit® Point is the smallest LED spotlight on the market. Its small diameter and focused light are perfect for highlighting items in tight spaces. The Pockit® Point features a very low profile with a recess depth of only 1/2“ (13 mm), a collar spring for quick recessing and a 79” (2 m) starter cord attached with a loose AMP® connector for easier wire routing.

Features: 1” (25 mm) recess diameter, 1/2“ (13 mm) recess depth 90° beam spread Nearly 70 lumens of output Spring clip mounted Recess mount Typical Applications:

30 mm 1-3/16 in.

Displays or store fixtures Museum cases Accent lighting Interior cabinets and shelving Small light boxes Closets (UL listed for use within closet storage spaces)

Available Finishes:

Black (BL)

Tiny 1” (25 mm) recessed diameter

Nickel (NI)

1-3/16” (30 mm)

White (WH)

1/2” (13 mm)

Dimensions:

1” (25 mm)

1-3/16” (30 mm) 1/2” (13 mm)

1” (25 mm)

Available in 3 finishes

1-3/16” (30 mm) overall diameter

1-800-227-1171 | trescolighting.com

79” (2 m)

Pockit® Point Typical Setup: Pockit® Point

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Starter Cord / Link Cords see pg. 165 under starter/ extension cords

Controllers see controller section

Power Supplies see power supply section

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

Beam Angle

12VDC

30,000 Hours

50 Fixtures

Recess

1 Year

90°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

37.60Fc

1.9ft L x 1.9ft W

3ft

4.18Fc (45lx)

(1.8 m L x 1.8 m W)

6ft

1.04Fc

11.6ft L x 11.5ft W

(.3 m) (.9 m) (1.8 m)

(404.7lx)

(11.2lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.58 m L x .58 m W)

5.8ft L x 5.8ft W 2700K

(3.5 m L x 3.5 m W)

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-LED-1EB-C Tested

See page 43 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

12VDC

Pockit® Spot

298 Lumens

3W 79" (2 m) 2-1/8" (54 mm)

30°

The 3W Pockit® Spot performs like a spotlight with a high focus output beam to keep countertops, kiosks and displays center stage. The fixture features an exceptionally low profile and two large springs for recess mounting in a depth of only 1-1/8" (29 mm). The 3W Pockit® Spot has the ability to swivel in either direction.

1-1/8" (29 mm) 12° of Swivel

Features: Compact 1-1/8” (29 mm) depth Focused 30° beam spread with 12° of swivel Extremely efficient at approximately 100 lumens per watt All metal construction Recess mount Typical Applications: Kiosks Displays or store fixtures Murphy beds Elevators

5 YEAR

COMMERCIAL GRADE W

RA N T

Available Finishes:

Black (BL)

Focused 30° beam spread

Nickel (NI)

Dimensions:

79" (2 m) 2-1/8" (54 mm) 1-1/8" (29 mm)

2-5/16" (59 mm) Available in black or nickel

Spotlight your collectibles without the worry of heat or UV damage

1-800-227-1171 | trescolighting.com

12° of Swivel

Pockit® Spot Typical Setup:

Pockit® Spot

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Starter Cord / Link Cords see pg. 165 under starter/ extension cords

Controllers see controller section

Power Supplies see power supply section

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

298

12VDC

50,000 Hours

20 Fixtures

Recess

5 Year

Photometric Data

Beam Angle

30°

Color Temperature

Height

Light Output

Beam Area

1ft

1,134Fc

.4ft L x .4ft W

3ft

126Fc

(1356.3lx)

(.4 m L x .4 m W)

6ft

31.5Fc

2.6ft L x 2.6ft W

(.3 m) (.9 m) (1.8 m)

(12217.0lx)

(339.1lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.12 m L x .12 m W)

1.3ft L x 1.3ft W 2700K

(.79 m L x .79 m W)

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-LED-3DSP-C Tested

See page 43 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

12VDC

250 Lumens

Pockit® Adapt

60°

25° 45°

As the name suggests, this Pockit® is adaptable to specific applications using one of three included lenses. Whether your application calls for a narrow or wide angle spot, only a simple change of the lens is needed. The 5/8” (16 mm) depth makes this one of the lowest profile spotlights in the industry while generating a staggering 250 lumen output.

Features: 3 beam-angle changing lenses included: 25°, 45°, 60° High output (250 lumens) Aluminum die cast construction Recess or surface mount – minimal 5/8” (16 mm) depth Typical Applications: Kiosks and displays ® Flyovers Pockit Adapt LED Lights • L -POC-5ADJ

082814

Cabinets and soffits Murphy beds Elevators

3" (76 mm)

Pockit® Adapt LED Lights • L -POC-5ADJ 79" 082814 AR (25 YEm)

COMMERCIAL GRADE W

Available Finishes: 3" (76 mm)

Black (BL)

3 beam-angle changing lenses included

Nickel (NI)

RA N T

79" (2 m) White (WH)

Dimensions:

Shown with Trim Ring

5/8" (16 mm)

Pockit® Adapt LED Lights • L -POC-5ADJ

082814

2-3/4" (70 mm)

3" (76 mm)

Recess or surface mount

Shown with Trim Ring Shown with Surface Mounting Ring

3/4" 5/8" (16 mm) (19 mm)

1-800-227-1171 | trescolighting.com

79" 3" 2-3/4" (2 m) (70 mm) (76 mm)

Shown with Surface Mounting Ring

3/4" (19 mm)

3" (76 mm)

Pockit® Adapt

Typical Setup:

Mounting Block

(Included with power supply)

Power Supply

Controller

(18W Power Supply shown)

(Rotary Dimmer shown)

Required Optional

Accessories:

Pockit® Adapt Trim Kit L-ADJTKIT-BL-1 L-ADJTKIT-NI-1 L-ADJTKIT-WH-1

Power Supplies see power supply section

Specifications:

Starter Cord / Link Cords see pg. 165 under starter/ extension cords

Controllers see controller section

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

250

12VDC

50,000 Hours

12 Fixtures

Recess/ Surface

5 Year

Beam Angle

60°

25° 45°

Photometric Data

Height

Light Output (60° Lens)

Light Output (45° Lens)

Light Output (25° Lens)

1ft

201.20Fc

456.80Fc

854.00Fc

3ft

22.36Fc

50.76Fc

94.89Fc

(1021.39lx)

(1 m L x 1 m W)

(.61 m L x .61 m W)

(.43 m L x .43 m W)

6ft

5.59Fc

12.69Fc

23.72Fc

6.8ft L x 6.7ft W

4ft L x 4ft W

2.8ft L x 2.8ft W

(.3 m) (.9 m) (1.8 m)

(2165.70lx) (240.68lx) (60.17lx)

(4916.95lx) (546.38lx) (136.59lx)

(9192.38lx)

(255.32lx)

Beam Area (60° Lens) 1.1ft L x 1.1ft W

(.34 m L x .34 m W)

3.4ft L x 3.3ft W

(2.1 m L x 2 m W)

Beam Area (45° Lens) .7ft L x .7ft W

(.21 m L x .21 m W)

2ft L x 2ft W

(1.22 m L x 1.22 m W)

Beam Area (25° Lens) .5ft L x .5ft W

(.15 m L x .15 m W)

1.4ft L x 1.4ft W

(.85 m L x .85 m W) L-POC-5ADJ-C Tested

Color Tempature Warm White

2700K

Warm to Neutral

3000K

Warm (3000K)

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

See page 44 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

Economy Series

12VDC

218 Lumens

3W EquiLine Puck

100°

With recessed or surface mount ability, EquiLine LED Pucks are perfect for use in a wide range of applications. Designed for the economically conscious, they feature a slim profile and a 79" (2 m) starter cord attached with an unattached AMP® connector for easy wire routing.

Features: 1/2” (13 mm) recessed depth 100° beam spread Luniform output – no “dots” Metal heatsink for cool operation Recess or surface mount Typical Applications: Furniture Desk Headboards

POC 3W Metal Surface Mount Ring

011510

Cabinets and light boxes

Closets (UL listed for use within closet storage spaces)

63 mm 2-1/2 in.

Available Finishes:

Black (BL)

Slim 1/2" (13 mm) recess profile

Nickel (NI)

Dimensions: 1/2” (13 mm)

Metal Puck Body – POC-3W

2-1/2” (63 mm)

Available in Black or Nickel

Surface mount ring sold separately

1-800-227-1171 | trescolighting.com

011510 2-1/4”

79” (2 m)

(57 mm)

9 1/2” mm 3/8 in. (13 mm)

2-1/2” Thru-way for wire exit (64 mm)

3W EquiLine Puck Typical Setup: 3W EquiLine Puck

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Power Supplies see power supply section

EquiLine Puck Surface Ring

Starter Cord / Link Cords see pg. 165 under starter/ extension cords

Controllers see controller section

L-SMR-2LED-BL-1 L-SMR-2LED-NI-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

Beam Angle

218

12VDC

25,000 Hours

20 Fixtures

Recess/ Surface

2 Year

100°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

89.00Fc

2ft diameter

3ft

9.89Fc

(106.5lx)

(2.1 m diameter)

6ft

2.47Fc

14ft diameter

(.3 m) (.9 m) (1.8 m)

(958lx)

(26.6lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.6 m diameter)

7ft diameter

2700K

(4.3 m diameter)

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-POC-3EQFR-C Tested

See page 44 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

120V

270 Lumens

Pockit 120-M

100°

The Pockit® 120-M is the next generation of our popular Pockit® 120 linkable series. Featuring a smaller size, each fixture has a built-in dimmable driver and the commercial grade, all-metal construction provides optimal heatsinking with more than double the light output of the original Pockit® 120-L. No external power supply needed, just plug in and start linking away!

Features: High output (270 lumens) Luniform output – no “dots” Dimmable to 50% by standard LED wall dimmers No power supply required Die cast construction Typical Applications: ® Non-Linkable Displays Pockit 120-M LED Lights • L -MPOC-4W-120NL

082114

Task lighting/flood lighting Interior cabinets/shelving Under cabinets

Available Finishes: Linkable Pockit® 120-M LED Lights • L -MPOC-4W-120L

Black (BL)

Nickel (NI)

Dimensions:

082114

White (WH)

Non-Linkable:

Shown with Mounting Ring 9" (228 mm)

7/8" (22 mm)

2-3/4" (70 mm)

Linkable up to 45 fixtures

9" (228 mm)

7/8" (22 mm)

2-3/8" (60 mm)

Linkable: 7/8" (22 mm)

9" (228 mm)

Shown with Mounting Ring

9" (228 mm)

2-3/4" (70 mm)

True plug-and-play: no transformer or power supply required

Recess or surface mount (ring included)

7/8” (22 mm)

9" (228 mm)

1-800-227-1171 | trescolighting.com

9" (228 mm)

2-3/8" (60 mm)

Pockit® 120-M Typical Setup:

Pockit® 120-M (Linkable)

Pockit® 120-M (Non-Linkable)

Pockit®120M Starter Cord Required Optional

Accessories:

Link Cord/Extension

Pockit® 120-M Starter Cord

L-FPOC-LINKA-25-BL-1 L-FPOC-LINKA-25-WH-1 L-FPOC-LINKA-60-BL-1 L-FPOC-LINKA-60-WH-1 L-FPOC-LINKA-120-BL-1 L-FPOC-LINKA-120-WH-1 L-FPOC-LINKA-180-BL-1 L-FPOC-LINKA-180-WH-1

L-MPOC-PKT8-BL-1 L-MPOC-PKT8-WH-1

Specifications:

Touch On/Off Switch

Round Switch - 120V

Pockit® 120-L/M Adaptor for Hardwire Box

Hardwire Boxes

L-TS2-72-1

L-RDSW-1M-120-BL-1 L-RDSW-1M-120-WH-1 L-RDSW-2M-120-BL-1 L-RDSW-2M-120-WH-1

L-HWB-BL-T5-1 L-HWB-WH-T5-1 L-HWB-BL-T5-S-1 L-HWB-WH-T5-S-1

L-FPOC-HWB-ADP-WH-1 L-FPOC-HWB-ADP-BL-1

Dimmable up to 50%

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Continuous Run

Mounting

Warranty

Beam Angle

270

67.5

120V

30,000 Hours

45 Fixtures

Recess/ Surface

3 Year

100°

Photometric Data

Color Temperature

Height

Light Output

1ft

110.5Fc

3ft

12.28Fc (132.2lx)

(2.1 m L x 2.1 m W)

6ft

3.07Fc

13.9ft L x 13.8ft W

(.3 m) (.9 m) (1.8 m)

(1189.4lx)

(33.0lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

2.3ft L x 2.3ft W

(.7 m L x .7 m W)

6.9ft L x 6.9ft W

2700K

(4.2 m L x 4.2 m W)

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-MPOC-4W-120NL-C Tested

See page 45 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

Puck

All product dimensions and specifications are subject to change without prior notice. Required Optional

3W Metal Surface MountPart Ring# 12VDC Pockit®POC Plus 1.5W Series

2-1/2” (63 mm)

1/4” (6 mm)

79” (2 m)

Description

011510

L-POC-1LEDSFR-CBL-1

1.5W 5000K Black LED Metal Pockit® Light

L-POC-1LEDSFR-CNI-1

1.5W 5000K Nickel LED Metal Pockit® Light

L-POC-1LEDSFR-CORB-1

1.5W 5000K Oil-Rubbed Bronze Pockit® Light

L-POC-1LEDSFR-CWH-1

1.5W 5000K White LED Metal Pockit® Light

L-POC-1LEDSFR-WBL-1

1.5W 3000K Black LED Metal Pockit® Light

L-POC-1LEDSFR-WNI-1

1.5W 3000K Nickel LED Metal Pockit® Light

L-POC-1LEDSFR-WORB-1

1.5W 3000K Oil-Rubbed Bronze Pockit® Light

L-POC-1LEDSFR-WWH-1

1.5W 3000K White LED Metal Pockit® Light

2-1/4" (57 mm) hole required for recessed mounting. Pockit® Plus Includes 79" (2 m) Starter Cord, Surface Mount Ring, and AMP® Connector.

2-1/4” (57 mm)

POC 3W Surface Metal Surface Mount Ring with each 011510light. Mount Ring is included

Metal Puck Body – POC-3W Mounting Ring

3/8” (10 mm)

011510

Thru-way for wire exit 3/8” (9 mm)

2-1/2” (63 mm)

Thru-way for wire exit

2-1/2” (63 mm)

2-1/2” 63 (mm)

12VDC 3W Power Pockit® Series Part #

Metal Puck Body – POC-3W

Description

011510L-POC-3LEDSFR-CAB-1

3W 5000K Black LED Pockit® Light

L-POC-3LEDSFR-CCH-1

3W 5000K Chrome LED Pockit® Light

L-POC-3LEDSFR-CNI-1

3W 5000K Nickel LED Pockit® Light

L-POC-3LEDSFR-CWH-1

3W 5000K White LED Pockit® Light

L-POC-3LEDSFR-NNI-1

3W 3500K Nickel LED Pockit® Light

L-POC-3LEDSFR-NBL-1

3W 3500K Black LED Pockit® Light

L-POC-3LEDSFR-WAB-1

3W 3000K Antique Brass LED Pockit® Light

L-POC-3LEDSFR-WBL-1

3W 3000K Black LED Pockit® Light

L-POC-3LEDSFR-WCH-1

3W 3000K Chrome LED Pockit® Light

L-POC-3LEDSFR-WNI-1

3W 3000K Nickel LED Pockit® Light

L-POC-3LEDSFR-WORB-1

3W 3000K Oil-Rubbed Bronze LED Pockit® Light

L-POC-3LEDSFR-WWH-1

3W 3000K White LED Pockit® Light

POC 3W Metal Surface Mount Ring

2-1/2” (63 mm)

2-1/2”3/8” (9 mm) (63 mm) Thru-way for wire exit

1/4” (6 mm)

79” (2 m) 2-1/4” (57 mm)

3W 5000K Antique Brass LED Pockit® Light

L-POC-3LEDSFR-CBL-1 011510

2-1/4” (57 mm) hole required for recessed mounting. Power Pockit® includes Surface Mount Ring, AMP® Connector, and 79" (2 m) of input lead.

POC 3W Surface Metal Surface Mount Ring with each 011510light. Mount Ring is included

3/8” (9 mm)

2-1/2” (63 mm)

57formm Thru-way wire exit

1/4” (6 mm)

79” (2 m)

(2-1/4 in.)

2-1/4” (57 mm)

6 mm (1/4 in.)

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141. 5 mm (3/16 in.)

1-800-227-1171 | trescolighting.com 10 mm (3/8 in.)

(25 mm)

2-1/2” (63 mm)

Puck

All product dimensions and specifications are subject to change without prior notice. Required Optional

12VDC 5W Power Pockit®

Part #

POC 3W Metal Surface 011510 Mount Ring 011510 Metal Puck Body – POC-3W L-POC-5LEDSCL-CBL-1

2-1/2” (63 mm)

79" (2 m) 1/8" 4 mm)

Description 5W 5000K Black LED Pockit® Light

L-POC-5LEDSCL-CNI-1

5W 5000K Nickel LED Pockit® Light

L-POC-5LEDSCL-CWH-1

5W 5000K White LED Pockit® Light

L-POC-5LEDSCL-WBL-1

5W 3000K Black LED Pockit® Light

L-POC-5LEDSCL-WNI-1

5W 3000K Nickel LED Pockit® Light

L-POC-5LEDSCL-WORB-1

5W 3000K Oil-Rubbed Bronze LED Pockit® Light

L-POC-5LEDSCL-WWH-1

5W 3000K White LED Pockit® Light

2-1/4" (57 mm) hole required for recessed mounting. Power Pockit® includes Surface Mount Ring, AMP® Connector, and 79" (2 m) input lead.

1/4” (6 mm)

79” (2 m) 2-1/4” (57 mm)

8 ft.

POC 3W Surface Metal Surface Mount Ring with each 011510light. Mount Ring is included

f Swivel

mm 16 in.

3/8” (9 mm)

2-1/2” (63 mm)

Thru-way for wire exit

1/4” (6 mm)

79” (2 m) 2-1/4”

mm) LED Series 12VDC Pockit® (57 Point 1-3/16” (30 mm) 1/2” (13 mm)

1” (25 mm)

79” (2 m)

3/8” (9 mm)

Description

L-LED-1EB-CBL-1

1W 12VDC Pockit® Point, 5000K, Black

L-LED-1EB-CNI-1

1W 12VDC Pockit® Point, 5000K, Nickel

L-LED-1EB-CWH-1

1W 12VDC Pockit® Point, 5000K, White

L-LED-1EB-WBL-1

1W 12VDC Pockit® Point, 3000K, Black

L-LED-1EB-WNI-1

1W 12VDC Pockit® Point, 3000K, Nickel

L-LED-1EB-WWH-1

1W 12VDC Pockit® Point, 3000K, White

1" (25 mm) hole required for recessed mounting. Collar Spring, 79" (2 m) Starter Cord, and AMP® Connector are included with each light.

Thru-way for wire exit

12VDC Pockit® Spot

79" (2 m) 2-1/8" (54 mm)

2-5/16" (59 mm)

8 ft.

Part #

Description

L-LED-3DSP-CBL-1

3W 5000K Black Recess Pockit® Swivel Spot

L-LED-3DSP-CNI-1

3W 5000K Satin Nickel Recess Pockit® Swivel Spot

L-LED-3DSP-WBL-1

3W 3000K Black Recess Pockit® Swivel Spot

L-LED-3DSP-WNI-1

3W 3000K Satin Nickel Recess Pockit® Swivel Spot

2-1/8" (54 mm) hole required for recessed mounting. Starter Cord 79" (2 m), and AMP® Connector are included with each light.

1-1/8" (29 mm)

8 ft.

12° of Swivel

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

Pockit® Adapt LED Lights • L -POC-5ADJ

082814

3" (76 mm)

Puck

(2 m)

3" (76 mm) ® Pockit AdaptPockit® Trim Ring • L -ADJTKIT 12VDC Adapt

79" (2 m)

082114

Pockit Adapt LED Lights • L -POC-5ADJ

Shown with Trim Ring

Pockit® Adapt Surface Mounting Ring • L -ADJTKIT (76 mm)

Part #

Description

L-POC-5ADJ-C-1

12VDC 5W Pockit® Adapt, 5000K

L-POC-5ADJ-W-1

12VDC 5W Pockit® Adapt, 3000K

082814

2-5/8" (67 mm) hole required for recessed mounting. 79" (2 m) Starter Cord, and AMP® Connector are included with each light. Trim kit purchased separately.

(1) Surface Mounting Ring and (1)Trim Ring are packaged together in Trim Kit

3" 3.0" 2-3/4" (76 mm) (70 mm)

79" (2 m)

Shown with Trim Ring

5/8" (16 mm)

Shown with Surface Mounting Ring

3/4" mm)

3" (76 mm)

2-3/4" (70 mm)

Shown with Trim Ring

5/8" (16 mm)

Shown with Surface Mounting Ring

3/4" (19 mm)

3" (76 mm)

2-3/4" (70 mm) Shown with Trim Ring

5/8" (16 mm)

3/4" 2-3/4" 12VDC Pockit® Adapt Trim Kit (70 mm) (19 mm) Trim Ring

3" (76 mm)

Shown with Surface Mounting Ring

3/4"3/16" (19 mm) (5 mm)

3" 3" (76 mm) (76 mm) Surface Mounting Ring

Part #

Description

L-ADJTKIT-BL-1

Pockit® Adapt Trim Kit, Black

L-ADJTKIT-NI-1 Pockit® Trim Kit, Nickel (1) Surface Mounting Ring and (1) Trim Ring areAdapt packaged together in Trim Kit.

5/8" (16 mm)

C 3W Metal Surface Mount 3"Ring

011510

L-ADJTKIT-WH-1

Pockit® Adapt Trim Kit, White

Part #

Description

L-POC-3EQFR-CBL-1

3W EquiLine Puck 5000K - Black

L-POC-3EQFR-CNI-1

3W EquiLine Puck 5000K - Nickel

L-POC-3EQFR-WBL-1

3W EquiLine Puck 3000K - Black

L-POC-3EQFR-WNI-1

3W EquiLine Puck 3000K - Nickel

(76 mm)

12VDC EquiLine Puck Light

Metal Puck Body – POC-3W

011510

63 mm 2-1/2 in.

2-1/2” (63 mm)

2-1/4" (57 mm) hole required for recessed mounting. EquiLine includes starter cord 79" (2 m) and AMP® Connector with each light. Surface mount ring sold separately.

1/2” (13 mm)

79” (2 m)

2-1/4” (57 mm)

12VDC EquiLine Puck Surface Ring 9 1/2” mm 3/8 in.

(13 mm)

Part #

Description

L-SMR-2LED-BL-1

EquiLine Puck Surface Ring Black

L-SMR-2LED-NI-1

EquiLine Puck Surface Ring Nickel

2-1/2” Thru-way for wire exit (64 mm) 1/4” (6 mm)

79” (2 m) 2-1/4” (57 mm)

Required Optional

(1) Surface Mounting Ring and (1) Trim Ring are packaged together in Trim Kit ® 082814

5/8" mm)

79" and specifications are subject to change without prior notice. All product dimensions

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

Puck

All product dimensions and specifications are subject to change without prior notice. Required Optional

12VDC Power Supplies

For details see Power Supplies on Page 142.

12VDC 24V DC 120V

COMPO NENTS Power Supplies Controll ers Install Accessor ies

Part #

Description

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT30-1

30W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT60-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

Non-Linkable Pockit 120-M LED Lights • L -MPOC-4W-120NL 082114 L-DC-EQ30-1 L-DC-EQ60-1 ®

1-800227-117 1 | trescol ighting .com

141

30W 12VDC Equiline Power Supply w/6 Snap Block* 60W 12VDC Equiline Power Supply w/6 Snap Block*

L-DCE30D-CON-1

30W 12VDC Hardwire Dimmable LED Power Supply†

L-DCE60D-CON-1

60W 12VDC Hardwire Dimmable LED Power Supply†

L-12DCH60X1-1

60W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

L-12DCH60X3-1

180W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

* Dimmable on trailing edge (12VDC side). Mounting block and power cord are included. † Dimmable by LED line voltage (120V) wall dimmers. Mounting block included. § Dimmable by LED line voltage (120V) wall dimmers. Mounting block not included All hardwire power supplies require an electrician for install.

120V Pockit® 120M-Non-Linkable

Linkable Pockit® 120-M LED Lights • L -MPOC-4W-120L Shown with Mounting Ring 9" (228 mm)

7/8" (22 mm)

2-3/4" (70 mm) 9" (228 mm)

7/8" (22 mm)

120V Pockit® 120-M-Linkable Shown with Mounting Ring

7/8" (22 mm)

9" (228 mm)

2-3/4" (70 mm) 7/8” (22 mm)

9" (228 mm)

2-3/8" (60 mm)

Description

L-MPOC-4W-120NL-CBL-1

120V Pockit® 120-M Non-Linkable, Cool, Black

L-MPOC-4W-120NL-CNI-1

120V Pockit® 120-M Non-Linkable, Cool, Nickel

L-MPOC-4W-120NL-CWH-1

120V Pockit® 120-M Non-Linkable, Cool, White

L-MPOC-4W-120NL-WBL-1

120V Pockit® 120-M Non-Linkable, Warm, Black Mounting Ring Pockit 120-M Surface

L-MPOC-4W-120NL-WNI-1

120V Pockit® 120-M Non-Linkable, Warm, Nickel

L-MPOC-4W-120NL-WWH-1

120V Pockit® 120-M Non-Linkable, Warm, White

082114

2-3/8" (60 mm) hole required for recessing. Surface mount ring included with each light. Dimmable to 50% by standard LED wall dimmers.

2-3/8" (60 mm)

9" (228 mm)

Part #

082114

Part #

Description

L-MPOC-4W-120L-CBL-1

120V Pockit® 120-M Linkable, Cool, Black

L-MPOC-4W-120L-CNI-1

120V Pockit® 120-M Linkable, Cool, Nickel

L-MPOC-4W-120L-CWH-1

120V Pockit® 120-M Linkable, Cool, White

L-MPOC-4W-120L-WBL-1

120V Pockit® 120-M Linkable, Warm, Black

L-MPOC-4W-120L-WNI-1

120V Pockit® 120-M Linkable, Warm, Nickel

L-MPOC-4W-120L-WWH-1

120V Pockit® 120-M Linkable, Warm, White

2-3/8" (60 mm) hole required for recessing. Surface mount ring included with each light. Dimmable to 50% by standard LED wall dimmers. 3/4" (19 mm)

2-3/4" (70 mm)

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

Puck

All product dimensions and specifications are subject to change without prior notice. Required Optional

Pockit® 120-M Power Cord

090914

120V Pockit® 120-M Starter Cord

8’

45. Linking Cord –(2.4FPOC-LinkA 180cm m)

Part #

Description

L-MPOC-PKT8-BL-1

120V Pockit® 120-M, 8 ft. (2.4 m) Starter Cord, Black

L-MPOC-PKT8-WH-1

120V Pockit® 120-M, 8 ft. (2.4 m) Starter Cord, White

070808

120V Link Cord/Extension

Part #

08. Rd Sw - 1 Hole size, if needed:

5/8” (16 mm)

7/8” Hole size, if needed: (23 mm) 5/8” (16 mm)

Description

L-FPOC-LINKA-25-BL-1

10" (25 cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-25-WH-1

10" (25 cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-60-BL-1

24" (60 cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-60-WH-1

24" (60 cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-120-BL-1

48" (120 cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-120-WH-1

48" (120 cm) White Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-180-BL-1

72" (180 cm) Black Pockit® 120-L/M Linking Cord

L-FPOC-LINKA-180-WH-1

72" (180 cm) White Pockit® 120-L/M Linking Cord

3/31/08

47. RDSW 120cm

08. Round Rd SwSwitch -1 120V

3/31/08

070808 u032209

ALL New by LL 1/23/09, based on IL#9 PartUpdate # caption to “PowerDescription Supply” for LED Spec Book 111

L-RDSW-1M-120-BL-1

120V Black Round Rocker Switch w/ 39" (1 m) Lead

L-RDSW-1M-120-WH-1

120V White Round Rocker Switch w/ 39" (1 m) Lead

L-RDSW-2M-120-WH-1

120V White 6’ Round Rocker Switch w/ 79" (2 m) Lead

17c. Touch On/Off Switch TS2-72 u020209 u010811 L-RDSW-2M-120-BL-1 120V Black Rounds012309 Rocker Switch w/ 79" (2 m) Lead 7/8” (23 mm)

2-1/8” 3/4" (19 mm) hole required. (54 mm)

(1.8 m)

6” (152 mm)

5’ (1.5 m)

1-9/16” (40 mm)

Hole size, if needed:14” (356 mm) 5/8”

3/4” (19 mm)

39” (1 m) 79” (2 m)

(16 mm) Female receptacle can accept up to (3) Power Supply plugs (120V ea.) Hole size

5/8” (17 mm)

required: 6” 3/4” (152 mm) (19 mm)

1m or 2m

Hole size required - 19mm (3/4 in)

ALL New by LL 1/23/09, based on IL#9 Update caption to “Power Supply” for LED Spec Book 111 Part #

Description

120V Touch On/Off Switch

L-TS2-72-1 17c. Touch On/Off Switch TS2-72

3/4” (19 mm)

2-1/8” (54 mm)

6’ (1.8 m)

5/8” mm)

5’ (17 (1.5 m)

Touch On/Off w/Cord And Touch Pad. Black, 200W

On/off Switch touch pad attaches to surface with adhesive backing. Power supply plugs into on/off switch touch pad.

s012309 u020209 u010811

1-9/16” (40 mm) 14” (356 mm)

Hole size required - 19mm (3/4 in)

3-3/8” (85 mm)

3/4” (21 mm)

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

Wire mold knockout or conduit fitting

1/2” 13 mm

Puck

All product dimensions and specifications are subject to change without prior notice. Required Optional

120V Hardwire Boxes

2-1/4” (56 mm) 3-9/16” (90 mm)

Description

L-HWB-BL-T5-1

T5 Black Hardwire Box, without Switch

L-HWB-WH-T5-1

T5 White Hardwire Box, without Switch

L-HWB-BL-T5-S-1

T5 Black Hardwire Box, with Switch

L-HWB-WH-T5-S-1

T5 White Hardwire Box, with Switch

Maximum (10) light fixtures per hardwire box. Must use Pockit® 120L/M Adaptor.

1-1/2” 46. Linking Cord (40 mm)

46. Linking Cord

Part #

070908

120V Pockit® 120-L/M Adaptor

for Hardwire Box

Part #

Description

L-FPOC-HWB-ADP-BL-1 7-3/4”

(195 mm) L-FPOC-HWB-ADP-WH-1

Pockit® 120-M Adaptor for Hardwire Box, Black Pockit® 120-M Adaptor for Hardwire Box, White

Required when using Hardwire Box.

7-3/4” (195 mm)

Box w Switch HWB-S-4 (T4) Wire mold knockout or conduit fitting

1/2” 13 mm

Hole size, if needed:

4/1/08 u3/22/09 3/4”

NOTE: Must use hardwire box when used with a wall dimmer. Do not dim a receptacle.

(19 mm)

Hole size, if needed: Hole size, if needed:

3/4” (19 mm)

Hole size, if needed:

5/8” (16 mm)

809070

411280

LN021-W4-COPM- L • sthgiL DEL M-021 ®tikcoP elbakniL-noN

droC gnikniL .64

How to Connect Using Hardwire Box:

56 mm 2-1/4 in.

mm 120-M 591 Pockit® Adaptor 90 mm 3-9/16 in.

Hardwire Box

.ni 4/3-7

1-1/2” (40 mm)

"9 )mm 822(

120V LED Wall Dimmers

"4/3-2 )mm 07(

mm 91 .ni 4/3

Part #

:dedeen fi ,ezis eloH

12VDC 24V DC 120V

COMPO NENTS Power Supplies Controll ers Install Accessor ies

"8/7 )mm 22(

:dedeen fi ,ezis eloH

For details see Power Supplies on Page 142.

Description

"9 )mm 822(

"8/7 )mm 22(

mm 61 L-DVCL-153P-WH-1

Lutron Diva® C•L™ 150W Dimmer w/o Plate

L-CTCL-153P-WH-1

Lutron Skylark Contour C•L™ 150W Dimmer w/o Plate

L-DSL06-1LZ-1

Leviton Decora 300W LED Dimmer w/WH-IV-LA Kit

.ni 8/5

"8/3-2 )mm 06(

1-800227-117 1 | trescol ighting .com

141

Wire mold knockout or conduit fitting

13 mm 1/2 in.

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

12VDC

120V

LINEAR

1-800-227-1171 | trescolighting.com

12VDC

FineLine 2.0

4.4W/ft. (14.4W/m)

330 Lumens per ft. (1082 per meter)

120°

3/8"

Pencil thin but still packing a big punch, FineLine is the unobtrusive (10 mm) way to provide stunning lighting to casework, displays, store fixtures and more. The low-profile design features a milk diffuser for even illumination, Luniform technology, and with optional manual or remote-control dimmers, creating the perfect atmosphere is effortless.

Features: Miniature Profile – 5/16“ (8 mm) 120° beam angle *Luniform output – no “dots” Available in (4) lengths – 8” (203 mm), 12” (305 mm), 22” (559 mm), or 34” (864 mm) Linkable

3/8" (10 mm)

79” (2 m) starter cord included Surface mount Typical Applications: Shelving Displays or store fixtures Interior and under cabinets Food service equipment 8" (203 mm)

3/8" (305 mm)closet storage spaces) Closets (UL listed for12" use within (10 mm) 22" (559 mm) 34” (864 mm) 5 YEAR

COMMERCIAL GRADE AR

Extremely thin, 5/16” (8 mm) low-profile design

3/8" (10 mm) Finishes: Available

RA N T

79" *Fixture may require a slight angle(2 using m) included swivel clips to eliminate diode reflection on some surfaces

Aluminum (AL)

Dimensions:

3/8" (10 mm)

Linkable (seamless back-to-back or link cord) up to 12 ft. (3.66 m) continuous run

8" (203 mm) 12" (305 mm) 22" (559 mm) 34” (864 mm)

3/8" (10 mm)

Straight and adjustable mounting U-clips included

1-800-227-1171 | trescolighting.com

79" (2 m) 5/16" (8 mm)

FineLine 2.0 Typical Setup: FineLine 2.0

Mounting Block

(Included with power supply)

Controller

(Rotary Dimmer shown)

Power Supply

(18W Power Supply shown)

Required Optional

Accessories:

Controllers

Power Supplies see power supply section

FineLine Link Cord

see controller section

L-LED-STKLNK-5-1 L-LED-STKLNK-15-1 L-LED-STKLNK-25-1 L-LED-STKLNK-60-1 L-LED-STKLNK-120-1 L-LED-STKLNK-180-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Max Continuous Run

Mounting

Warranty

4.4W/ft. (14.4W/m)

330 per ft. (1082 per m)

12VDC

50,000 Hours

13' (4 m)

12' (3.66 m)

Surface

5 Year

Photometric Data

Beam Angle

120°

Color Temperature

Height

Light Output

1ft

279Fc

3ft

31.0Fc

(333.6lx)

(3.1 m L x 3.3 m W)

6ft

7.75Fc

20.5ft L x 21.6ft W

(.3 m) (.9 m) (1.8 m)

(3003.1lx)

(83.4lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

3.4ft L x 3.6ft W

(1 m L x 1.1 m W)

10.3ft L x 10.8ft W

(6.2 m L x 6.6 m W)

L-STKHO34-CNI-1 Tested

2700K

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

See page 64 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

470 Lumens

5W/ft.

per ft. (1541 per meter)

(16.4W/m)

12VDC

SimpLED 2.0

110°

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.)

The SimpLED 2.0 sets the bar for light output and simplicity. With the patented push-in "H" connection system and inline control modules, you get the simplest and quickest installation possible. Use either straight or pivoting mounting clips, then snap the fixtures into place to let over 470 lumens per foot illuminate your project. US PATENT NO: 8,545,045

Features:

Clean, low-profile aluminum finish – 3/8” (10 mm) Luniform output – no “dots” Available in (3) lengths – 8” (203 mm), 12” (305 mm) or 22” (559 mm) (3) diffuser options included Linkable Optional series of in-line controllers available 10 mm (3/8 in.)

Integrated magnets for mounting to metal Surface mount Typical Applications:

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.)

Showcases Displays or store fixtures Task lighting Metal shelving Office furniture Under cabinet Linkable (back-to-back or link cord) up to 10' (3 m) continuous run

5 YEAR

COMMERCIAL GRADE W

RA N T

Milk/Opal

Frosted

Clear

Available Finishes:

Three diffuser options packaged with each light

Aluminum (AL)

Dimensions: 79” (2 m)

3/8” (10 mm) Straight and adjustable mounting U-Clips and magnets included

3/4” (19 mm)

1-800-227-1171 | trescolighting.com

8” (203 mm) 12” (305 mm) 22” (559 mm)

7/16” (11 mm)

SimpLED 2.0 Typical Setup: SimpLED 2.0

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

SimpLED Link Cord

Controllers

Power Supplies see power supply section

see controller section

L-LED-SMPLNK-5-1 L-LED-SMPLNK-15-1 L-LED-SMPLNK-25-1 L-LED-SMPLNK-60-1 L-LED-SMPLNK-120-1 L-LED-SMPLNK-180-1

Rectangle Inline Motion Sensor (27 Watt Max)

Rectangle Inline Touch Dimmer (27 Watt Max)

L-LED-SMPMOT-1

L-LED-SMPTD4-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Max Continuous Run

Mounting

Warranty

5W/ft. (16.4W/m)

470 per ft. (1541 per m)

12VDC

50,000 Hours

12' (3.7 m)

10' (3 m)

Surface

5 Year

Photometric Data

Beam Angle

110°

Color Temperature

Height

Light Output

1ft

244.70Fc

3ft

27.19Fc

(292.7lx)

(2.5 m L x 2.5 m W)

6ft

6.80Fc

16.4ft L x 16.5ft W

(.3 m) (.9 m) (1.8 m)

(2634lx)

(73.2lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

2.7ft L x 2.8ft W

(.82 m L x .85 m W)

8.2ft L x 8.3ft W

(5 m L x 5 m W)

2700K

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-SMPHO22-CNI-1 Tested

See page 65 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

216 Lumens

4W/ft.

per ft. (708 per meter)

(13.1W/m)

12VDC

Eurolinx

120°

The Eurolinx's flat profile blends in with any application. Using specialized diffuser and reflector technology to achieve Luniform output, this European style light is a perfect choice for all contemporary and high-end commercial applications. Use the optional magnetic U-Clips for metal shelving or office furniture mounting. At 4W per foot and over 200 lumens, Eurolinx is a top pick for sleek high illumination.

Features: Flat slim design – 5/16” (8 mm) Two beam spreads based on orientation Luniform output – no “dots” Available in (5) lengths Linkable Surface mount Typical Applications: Cabinets or shelving Task lighting Showcases 5 YEAR

COMMERCIAL GRADE W

RA N T

Available Finishes: Sleek, contemporary European design

Eurolinx LED Lights • L -EUL

082114

Aluminum (AL) 1-3/16" (30 mm)

7-3/4" (197 mm) 10-3/4 (273 mm) 1-19/64" 19-3/4" (502 mm) (33 mm) 31-3/4" (806 mm) 082114 43-3/4" (1111 mm) LED Lights • L -EUL 082114 Eurolinx

Eurolinx LED Lights • L -EUL

Dimensions: Linkable (back-to-back or link cord) up to 10' (3 m) continuous run

1-3/16" (30 mm)

7-3/4" (197 mm)

10-3/4” (273 mm) 7-3/4" (197 mm)(502 mm) 19-3/4" 10-3/4” (273 mm)(806 mm) 31-3/4" 43-3/4" (1111 mm) 19-3/4" (502 mm) 31-3/4" (806 mm) 43-3/4" (1111 mm) 5/16" (8 mm)

Mounting clips included. Mounting clips with magnets sold separately.

1-800-227-1171 | trescolighting.com

1-3/16" (30 mm)

7/8" (22 mm)

7/8" (22 mm) 79" (2 m)

79" (2 m)

Eurolinx Typical Setup: Eurolinx

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Eurolinx Touch Dimmer (27 Watt Max)

Controllers

Power Supplies

see controller section

see power supply section

L-EUL-GTD-1

Eurolinx Cords

L-EULNK-15-WH-1 L-EULNK-25-WH-1 L-EULNK-60-WH-1 L-EULNK-120-WH-1 L-EULNK-180-WH-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Max Continuous Run

Mounting

Warranty

4W/ft. (13.1W/m)

216 per ft. (708 per m)

12VDC

50,000 Hours

15' (4.6 m)

10' (3 m)

Surface

5 Year

Photometric Data

Beam Angle

120°

Color Temperature

Height

Light Output

1ft

266.60Fc

3ft

29.62Fc (318.8lx)

(2.7 m L x 3 m W)

6ft

7.40Fc

17.6ft L x 20ft W

(.3 m) (.9 m) (1.8 m)

(2870lx)

(79.6lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

2.9ft L x 3.3ft W

(.88 m L x 1 m W)

8.8ft L x 10ft W

(5.4 m L x 6 m W)

L-EUL15W-1111CAL-1 Tested

2700K

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

See page 66 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

12VDC

Elli® Series

per ft. (654 per meter)

(11.8W/m)

120°

The patented Elli® Series is available in six lengths and features a square or an angled design that fits easily over glue or staples commonly found in cabinet and casework construction. High-output, wide-angle LEDs and fixture-to-fixture linking capability make for perfect, even illumination. US PATENT NO: D577,857 and D574,107

Features: Wide 120° beam spread (2) models: squared and angled

Elli® V

Elli® 2

Available in (6) lengths Instant on, instant brightness! Linkable Sleek and durable aluminum design Surface mount Typical Applications: Showcases Jewelry cases Task lighting Store fixtures 22 mm (10 in.) 22 mm (16 in.) 22 mm (22 in.) 22 mm (28 in.) 22 mm (34 in.) 22 mm (40 in.) 5 YEAR

Shelf lighting Interior cabinet 1-1/16” (27 mm)

COMMERCIAL GRADE

Available Finishes: Elli® V's patented angled design allows for tight corner mounting

2 mm 4 in.

200 Lumens

3.6W/ft.

RA N T

5/8” (16 mm) Aluminum (AL)

Elli® 2's square design is easy to install and conceal

Elli® V

Dimensions: 1/2” (13 mm) 3/8” (10 mm)

54°

1-1/16” (27 mm)

15 mm 5/8 in. 5/8” (16 mm)

Elli® 2

1/4” 3/8” (6 mm) (10 mm)

11 mm 7/16 in.

Linkable up to 12' (3.6 m) continuous run

4” mm)

2” (102 ( 51 mm)

1-800-227-1171 | trescolighting.com

1/2” (13 mm) 3/8” (10 mm)

7/16” (11 mm)

54°

1/4” 3/8” (6 mm) (10 mm)

Elli® Series Typical Setup: Elli® V

Starter Cord Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

Starter Cord / Link Cord

Power Supplies see power supply section

Specifications:

L-LED-LINKD-8-1 L-LED-LINKD-15-1 L-LED-LINKD-25-1 L-LED-LINKD-60-1 L-LED-LINKD-120-1 L-LED-LINKD-180-1 L-LED-LINKD-245-1

Controllers

see controller section

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Max Continuous Run

Mounting

Warranty

3.6W/ft. (11.8W/m)

200 per ft. (654 per m)

55.4

12VDC

50,000 Hours

16' (4.88 m)

12' (3.66 m)

Surface

5 Year

Photometric Data

Beam Angle

120°

Color Temperature

Height

Light Output

Beam Area

1ft

282.60Fc

3ft L x 3ft W

3ft

31.40Fc (338lx)

(2.7 m L x 2.7 m W)

6ft

7.85Fc

18ft L x 18.1ft W

(.3 m) (.9 m) (1.8 m)

(3041.9lx)

(84.5lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.9 m L x .9 m W)

9ft L x 9ft W

2700K

3000K

(5.5 m L x 5.5 m W)

4500K

Warm (3500K)

5500K

6500K

Cool (4800K)

L-LED-SQPR-1016CAL-1 Tested

See page 66 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

Economy Series

12VDC

EquiLine SimpLED

214 Lumens

4.5W/ft. (14.8W/m)

per ft. (702 per meter)

120°

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.)

The patented SimpLED features the unique "three-in-one" system of diffuser options, giving you power to determine glare reflection and intensity. Optional touch, motion or photo/light control modules can be installed in-line or remotely mounted via link cord to further expand your lighting capabilities. US PATENT NO: 8,545,045

Features: Clean, flat low-profile aluminum finish – 3/8” (10 mm) Wide 120° beam spread Available in (3) lengths – 8” (203 mm), 12” (305 mm) or 22” (559 mm) Linkable Optional series of in-line controllers available

Clear

Magnets attached to bottom of fixture for metal shelf mounting Surface mounting options: screw, magnetic, straight and adjustable mounting U-clips 203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.) Typical Applications: Showcases

Frosted

Displays or store fixtures Task lighting Metal shelving Office furniture Under cabinet

Milk/Opal

3 diffuser options (included)

Available Finishes:

Aluminum (AL)

Linkable (back-to-back or link cord) up to 10' (3 m) continuous run

Dimensions:

79” (2 m)

3/8” (10 mm) Straight and adjustable mounting U-clips and magnets included

3/4” (19 mm)

1-800-227-1171 | trescolighting.com

8” (203 mm) 12” (305 mm) 22” (559 mm)

7/16” (11 mm)

10 mm (3/8 in.

EquiLine SimpLED Typical Setup: EquiLine SimpLED

Mounting Block

(Included with power supply)

Controller

(Rotary Dimmer shown)

Power Supply

(18W Power Supply shown)

Required Optional

Accessories:

SimpLED Link Cord

Controllers

Power Supplies

see controller section

see power supply section

L-LED-SMPLNK-5-1 L-LED-SMPLNK-15-1 L-LED-SMPLNK-25-1 L-LED-SMPLNK-60-1 L-LED-SMPLNK-120-1 L-LED-SMPLNK-180-1

Rectangle Inline Motion Sensor (27 Watt Max)

Rectangle Inline Touch Dimmer (27 Watt Max)

L-LED-SMPMOT-1

L-LED-SMPTD4-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Max Continuous Run

Mounting

Warranty

4.5W/ft. (14.8W/m)

214 per ft. (702 per m)

124

12VDC

50,000 Hours

13' (3.96 m)

10' (3.04 m)

Surface

3 Year

Photometric Data

Beam Angle

120°

Color Temperature

Height

Light Output

1ft

86.4Fc

3ft

9.6Fc

(103.3lx)

(2 m L x 2.7 m W)

6ft

2.40Fc

13.1ft L x 17.6ft W

(.3 m) (.9 m) (1.8 m)

(930lx)

(25.8lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

2.2ft L x 2.9ft W

(.67 m L x .88 m W)

6.6ft L x 8.8ft W

(4 m L x 5.4 m W)

L-LED-SMP12-CNI-1 Tested

2700K

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

See page 65 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

Economy Series

12VDC

EquiLine FineLine

297 Lumens

2.4W/ft.

per ft.

(7.9W/m)

(971 per meter)

90°

3/8" (10 mm)

Long and narrow, FineLine is the unobtrusive way to provide smooth, linear lighting almost anywhere. The low profile design features a frosted diffuser for even illumination and with optional manual or remote control dimmers, creating the perfect atmosphere is effortless.

Features: Extremely thin, low-profile design – 5/16” (8 mm) 90° beam spread Available in (3) lengths – 8” (203 mm), 12” (305 mm) or 22” (559 mm)

3/8" (10 mm)

Linkable Frosted diffuser 79” (2 m) starter cord included Surface mount Typical Applications: Shelving Displays or store fixtures Interior and under cabinets 8" (203 mm) Food service equipment 12" (305 mm) 22" (559 mm) 34” (864 mm)

Optional in-line touch dimmer available (4-step: low-medium-high-off)

3/8" (10 mm)

3/8" Available (10 mm) Finishes:

79" (2 m)

Aluminum (AL)

Dimensions:

3/8" (10 mm)

Linkable (back-to-back or link cord) up to 12' (3.66 m) continuous run

3/8" (10 mm)

8" (203 mm) 12" (305 mm) 22" (559 mm) 3/8" (10 mm)

Straight and adjustable mounting U-Clips included

1-800-227-1171 | trescolighting.com

79" (2 m) 5/16" (8 mm)

EquiLine FineLine Typical Setup: EquiLine FineLine

Mounting Block

(Included with power supply)

Controller

Power Supply

(Rotary Dimmer shown)

(18W Power Supply shown)

Required Optional

Accessories:

FineLine Link Cord

Controllers

Power Supplies see power supply section

see controller section

L-LED-STKLNK-5-1 L-LED-STKLNK-15-1 L-LED-STKLNK-25-1 L-LED-STKLNK-60-1 L-LED-STKLNK-120-1 L-LED-STKLNK-180-1

FineLine Touch Dimmer L-LED-STKDIM-TD4-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Max Continuous Run

Mounting

Warranty

2.4 W/ft. (7.9W/m)

297 per ft. (971 per m)

124

12VDC

50,000 Hours

24' (7.32 m)

12' (3.66 m)

Surface

3 Year

Photometric Data

Beam Angle

90°

Color Temperature

Height

Light Output

1ft

284Fc

3ft

31.5Fc

(339.1lx)

(1.9 m L x 1 m W)

6ft

7.88Fc

19ft L x 9.9ft W

(.3 m) (.9 m) (1.8 m)

(3056.9lx)

(84.8lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

3.2ft L x 1.7ft W

(.97 m L x .52 m W)

6.3ft L x 3.3ft W

(5.7 m L x 3 m W)

L-LED-STK22-CNI-1 Tested

2700K

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

See page 64 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

295 Lumens

4.3W/ft.

T5 Trescent® LED

per ft. (967 per meter)

(14W/m)

120V

150°

Look again — that's not a fluorescent, that's a LED Linear Light. The T5 LED has the same low profile as fluorescent strip lights without the harmful material, costly energy consumption or bulb replacement and breakage. While fluorescent bulbs produce uneven light, the T5 LED Series produces even light throughout the length of the fixture, giving off 20 percent more light than other brands.

Features: Luniform output – no “dots” Available in (6) lengths Slim end cap design eliminates dark spots when linking Averages 30% less energy consumption than fluorescent equivalent No hum or flicker as found in similar fluorescent lights Instant on, instant brightness! Integrated on/off switch Typical Applications:

Power Cord 6’ (1.8 m)

Displays Office furniture Cabinets or shelving Laboratory furniture

1-7/16” (37 mm)

Backlighting

10-1/2” (267 mm) 13-1/2” (343 mm) 22-1/2” (571 mm) 35-1/2” (904 mm) 47-1/2” (1204 mm) Integrated on/off switch, proprietary diffuser 59-1/4” (1504 mm)

to eliminate dotted appearance

1-11/16” (42.5 mm)

Soffit, perimeter lighting or cove lighting

Available Finishes:

Power Cord

90 Degree Adaptor

(

Black (BL)

White (WH)

Dimensions:

9/16” (15 mm)

Power Cord 6’ (1.8 m)

6' (1.8 m) starter cord, mounting clips, back-to-back connectors and 90° connectors included 1-7/16” (37 mm)

1-7/16” (37 mm)

1-11/16” (42.5 mm) 10-1/2” (267 mm) 13-1/2” (343 mm) 22-1/2” (571 mm) 35-1/2” (904 mm) 47-1/2” (1204 mm) 59-1/4” (1504 mm)

90 Degree Adaptor

7/8” (22 mm)

Linkable up to 150W or 10 fixtures 9/16” (15 mm)

1-800-227-1171 | trescolighting.com

9/16” (15 mm)

101322354759-

T5 Trescent® LED Typical Setup:

T5 Trescent® LED

Link Cord / Extension

T5 Trescent® LED

Required Optional

Accessories:

Hardwire Box Adaptor

Hardwire Boxes

L-LT5-HWBADP-BL-1 L-LT5-HWBADP-WH-1

L-HWB-WH-T5-1 L-HWB-BL-T5-1 L-HWB-WH-T5-S-1 L-HWB-BL-T5-S-1

Link Cord / Extension

U Clips - Metal

L-LT5-LNK15-BL-1 L-LT5-LNK15-WH-1 L-LT5-LNK25-BL-1 L-LT5-LNK25-WH-1 L-LT5-LNK60-BL-1 L-LT5-LNK60-WH-1 L-LT5-LNK120-BL-1 L-LT5-LNK120-WH-1 L-LT5-LNK180-BL-1 L-LT5-LNK180-WH-1

L-TRS5-UCLP-M-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Continuous Run

Mounting

Warranty

Beam Angle

4.3W/ft. (14W/m)

295 per ft. (967 per m)

68.6

120V

30,000 Hours

10 Fixtures or up to 150W

Surface

3 Year

150°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

318.50Fc

2.6ft L x 15.3ft W

3ft

35.39Fc

7.9ft L x 45.8ft W

6ft

8.85Fc

15.8ft L x 91.6ft W

(.3 m) (.9 m) (1.8 m)

(3428.30lx) (380.93lx) (95.26lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.8 m L x 4.7 m W)

(2.4 m L x 14 m W)

2700K

(4.8 m L x 27.9 m W)

3000K

Warm (3000K)

4500K

5500K

Cool (5000K)

6500K

Daylight (6500K)

L-LT518W-1204CWH-1 Tested

See page 68 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

22" (559 mm) 34” (864 mm)

Linear

3/8" (10 mm)

79" (2 m)

12VDC FineLine 2.0 LED Series(103/8" mm) 3/8" (10 mm) 8" (203 mm) 12" (305 mm) 22" (559 mm) 34” (864 mm)

3/8" (10 mm)

3/8" (10 mm) 3/8" (10 mm)

8" (203 mm) 12" (305 mm) 22" (559 mm)

3/8" (10 mm)

79" (2 m)

5/16" (8 mm)

12VDC EquiLine FineLine LED Series 3/8" (10 mm) 3/8" (10 mm)

8" (203 mm) 12" (305 mm) 22" (559 mm)

8" (203 mm) 12" (305 mm) 22" (559 mm) 34” (864 mm)

3/8" (10 mm)

5/16" (8 mm) 5/16" (8 mm)

2” (5 cm) 6” (15 cm) 3/8” 10” (25 cm) (10 mm) 8" (20324” mm)(60 cm) (120 cm) 12" (30548” mm) 5/16" 22" (55972” mm) (180 cm)

Part # L-STKHO8-CNI-1 L-STKHO12-CNI-1 L-STKHO22-CNI-1

79" (2 m)

1” (25 mm)

3/8" (10 mm)

(3/8")

L-STKHO8-WNI-1

8" (203 mm) Fineline 2.0, 3000K, Nickel

L-STKHO12-WNI-1

12" 305 mm) Fineline 2.0, 3000K, Nickel

L-STKHO22-WNI-1

22" (559 mm) Fineline 2.0, 3000K, Nickel

L-STKHO34-WNI-1

10 mm (3/8") 10 mm Description 8" (203 mm) EquiLine Fineline, 5000K,(3/8") Nickel 12" (305 mm) EquiLine Fineline, 5000K, Nickel10 mm 22" (559 mm) EquiLine Fineline, 5000K, Nickel (3/8")

74 m 2-7/8

10 mm 34" (864 mm) Fineline 2.0, 3000K, Nickel(3/8")

Maximum continuous run of 12 ft. (3.7 m) to prevent voltage drop. Maximum 13 ft. (4 m) per 60W power supply. 79" (2 m) Starter Cord, AMP® Connector and mounting U-Clips are included with each light.

Part # L-LED-STK8-CNI-1 L-LED-STK12-CNI-1

8" (203 mm) EquiLine Fineline, 3000K, Nickel

L-LED-STK12-WNI-1

12" (305 mm) EquiLine Fineline, 3000K, Nickel

L-LED-STK22-WNI-1

22" (559 mm) EquiLine Fineline, 3000K, Nickel

74 mm 2-7/8"

10 mm (3/8")

Part #

Description

L-LED-STKLNK-5-1

5 cm (2”) 12VDC Stick Linking Cord

L-LED-STKLNK-15-1

15 cm (6”) 12VDC Stick Linking Cord

10 mm 25 cm (10”) 12VDC Stick Linking Cord (3/8") 60 cm (24”) 12VDC Stick Linking Cord

L-LED-STKLNK-120-1

120 cm (48”) 12VDC Stick Linking Cord

L-LED-STKLNK-180-1

180 cm (72”) 12VDC Stick Linking Cord

Part #

Description

L-LED-STKDIM-TD4-1

Inline Touch Dimmer, 4 Step

74 mm 2-7/8"

79" (2 m)

12VDC FineLine Touch Dimmer 5/16" (8 mm)

2-1/8" (54 mm)

3/8" (10 mm)

1-3/4" (44 mm)

1/4" (6 mm)

Controls up to 6 ft. (1.8 m) of FineLine 2.0 lights and 10 ft. (3 m) of EquiLine FineLine lights.

3/8" (10 mm)

74 mm 2-7/8"

5/16" (8 mm)

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

74 m 2-7/8"

Maximum continuous run of 12 ft. (3.7 m) to prevent voltage drop. Maximum 24 ft. (7.3 m) per 60W power supply. 79” (2 m) Starter Cord, AMP® Connector and mounting U-Clips are included with each light.

L-LED-STKLNK-60-1

(8 mm)

Optional

22" (559 mm) Fineline 2.0, 5000K, Nickel

34" (864 mm) Fineline 2.0, 5000K, Nickel

L-LED-STKLNK-25-1

3/8" (10 mm)

Required

12" (305 mm) Fineline 2.0, 5000K, Nickel

L-STKHO34-CNI-1

L-LED-STK8-WNI-1

12VDC FineLine Link Cord 5/16” (8 mm)

All product dimensions and specifications are subject to change without prior notice.

L-LED-STK22-CNI-1

3/8" 79" (10 (2 m)mm)

10 mm (3/8") 10 mm (3/8") Description 10 mm 8" (203 mm) Fineline 2.0, 5000K, Nickel (3/8") 10 mm

1-800-227-1171 | trescolighting.com

10 mm (3/8 in.)

559 mm (22 in.) Linear

All product dimensions and specifications are subject to change without prior notice. Required Optional

Part #

12VDC SimpLED 2.0 Series

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.)

3/8” (10 mm)

79” (2 m)

7/16” (11 mm)

8” (203 mm) 12” (305 mm) 22” (559 mm)

3/4” (19 mm)

10 mm (3/8 in.) L-SMPHO8-CNI-1

Description 8" (203 mm) 12VDC SimpLED 2.0, 5000K Nickel

L-SMPHO12-CNI-1

12" (305 mm) 12VDC SimpLED 2.0, 5000K Nickel

L-SMPHO22-CNI-1

22" (559 mm) 12VDC SimpLED 2.0, 5000K Nickel

L-SMPHO8-WNI-1

8" (203 mm) 12VDC SimpLED 2.0, 3000K Nickel

L-SMPHO12-WNI-1

12" (305 mm) 12VDC SimpLED 2.0, 3000K Nickel

L-SMPHO22-WNI-1

22" (559 mm) 12VDC SimpLED 2.0, 3000K Nickel

Maximum continuous run 10 ft. (3 m) to prevent voltage drop. Maximum 12 ft. (3.6 m) per power supply. 79" (2 m) Starter Cord, AMP® Connector, H-Shaped Connector, and Mounting U-Clips are included with each light. 3 diffusers (Clear, Frosted and Milk/Opal) are included with each light.

12VDC EquiLine SimpLED Series

79” (2 m)

3/8” (10 mm)

7/16” (11 mm)

8” (203 mm) 12” (305 mm) 22” (559 mm)

3/4” (19 mm)

Part #

Description

L-LED-SMP8-CNI-1

8" (203 mm) EquiLine SimpLED, 5000K, Nickel,

L-LED-SMP12-CNI-1

12" (305 mm) EquiLine SimpLED, 5000K, Nickel

L-LED-SMP22-CNI-1

22" (559 mm) EquiLine SimpLED, 5000K, Nickel

L-LED-SMP8-WNI-1

8" (203 mm) EquiLine SimpLED, 3000K, Nickel,

L-LED-SMP12-WNI-1

12" (305 mm) EquiLine SimpLED, 3000K, Nickel

L-LED-SMP22-WNI-1

22" (559 mm) EquiLine SimpLED, 3000K, Nickel

Maximum continuous run 10 ft. (3 m) to prevent voltage drop. Maximum 13 ft. (3.7 m) per 60W power supply. 79" (2 m) Starter Cord, AMP® Connector, H-Shaped Connector, and mounting U-Clips are included with each light. 3 diffusers (Clear, Frosted and Milk/Opal) are included with each light.

12VDC SimpLED Link Cord 5/16” (11 mm)

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.) 2” (5 cm) 6” (15 cm) 10” (25 cm) 24” (60 cm) 48” (120 cm) 72” (180 cm)

12VDC SimpLED Control Modules Photo

2-3/4” (70 mm)

Touch

Motion

Description

L-LED-SMPLNK-5-1

5 cm (2”) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-15-1

15 cm (6”) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-60-1

60 cm (24”) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-120-1

120 cm (48”) 12VDC SimpLED Linking Cord

L-LED-SMPLNK-180-1

180 cm (72”) 12VDC SimpLED Linking Cord

2 m (79 in.) L-LED-SMPLNK-25-1 25 cm (10”) 12VDC SimpLED Linking Cord

5/16” (11 mm)

3/8” (10 mm)

Part #

3/4” (19 mm)

203 mm (8 in.) 305 mm (12 in.) 559 mm (22 in.) 4-1/8” (105 mm)

Part #

Description

L-LED-SMPTD4-1

27W Rectangle Inline Touch Dimmer

L-LED-SMPMOT-1

27W Rectangle Inline Motion Sensor

Controls up to 5.4 ft. (1.6 m) of SimpLED 2.0 lights and 6.0 ft. (1.8 m) of EquiLine SimpLED lights.

2 m (79 in.)

Max load 27W.

3/8” (10 mm)

Photo

2-3/4” (70 mm)

Touch

Motion

3/4” (19 mm)

4-1/8” (105 mm)

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

Linear

1-3/16" (30 mm)

All product dimensions and specifications are subject to change without prior notice.

7-3/4" (197 mm) 10-3/4 (273 mm) 19-3/4" (502 mm) 31-3/4" (806 mm) 43-3/4" (1111 mm)

Eurolinx LED Lights • L -EUL

12VDC Eurolinx Series 1-3/16" (30 mm)

Required

1-19/64" (33 mm)

Optional

082114

7-3/4" (197 mm) 10-3/4” (273 mm) 19-3/4" (502 mm) 31-3/4" (806 mm) 43-3/4" (1111 mm)

7/8" (22 mm)

79" (2 m)

5/16" (8 mm)

1-3/16" (30 mm)

Part #

Description

L-EUL3W-197CAL-1

197 mm (7.75”) 12VDC 3W Eurolinx 5000K

L-EUL4W-273CAL-1

273 mm (10-3/4”) 12VDC 4W Eurolinx 5000K

L-EUL7W-502CAL-1

502 mm (19-3/4”) 12VDC 7W Eurolinx 5000K

L-EUL11W-806CAL-1

806 mm (31-3/4”) 12VDC 11W Eurolinx 5000K

L-EUL15W-1111CAL-1

1111 mm (43-3/4”) 12VDC 15W Eurolinx 5000K

L-EUL3W-197WAL-1

197 mm (7.75”) 12VDC 3W Eurolinx 3000K

L-EUL4W-273WAL-1 L-EUL7W-502WAL-1 Eurolinx Link Cord • L -EULNK L-EUL11W-806WAL-1

7/8" (22 mm)

L-EUL15W-1111WAL-1

7/8" (22 mm)

502 mm (19-3/4”) 12VDC 7W Eurolinx 3000K 806 mm (31-3/4”) 12VDC 11W Eurolinx 3000K 1111 mm (43-3/4”) 12VDC 15W Eurolinx 3000K

2" (5 cm) Maximum continuous run 10 ft. (3 m) to prevent voltage drop. Maximum 15 ft. (4.6 m) per 60W power supply. 6" (15 cm) Each light includes 79" (2 m) cord, U-Clips, back to back connector. 10" (25 cm)

5/16" (8mm)

Eurolinx Link Cord • L1-3/16" -EULNK

12VDC Euro Link (30mm) Cord

082114

24" (60 cm) 48" (120 cm) 72" (180 cm)

Part #

7/8" Module • L -EUL -GTD Eurolinx Inline Dimmer

7/8" (22 mm)

273 mm (10-3/4”) 12VDC 4W Eurolinx 3000K 082114

(22 mm)

2" (5 cm) 6" (15 cm) 10" (25 cm) 24" (60 cm)1-3/16" 48" (120 cm) (30 mm) 72" (180 cm)

Description

L-EULNK-15-WH-1

15 cm (6”) Eurolinx Linking Cord, White

L-EULNK-25-WH-1

25 cm (10”) Eurolinx Linking Cord, White

L-EULNK-60-WH-1

60 cm (24”) Eurolinx Linking Cord, White

L-EULNK-120-WH-1

120 cm (48”) Eurolinx Linking Cord, White

L-EULNK-180-WH-1

180 cm (72”) Eurolinx Linking Cord, White

082814

1-3/8" (35 mm) 5/16" (8 mm)

1-3/16" (30 mm) Eurolinx Inline Dimmer Module • L -EUL -GTD

082814

12VDC Eurolinx Touch Dimmer 5/16" (8 mm)

1-1/16” (27 mm)

1-3/16" (30 mm)

1-1/16” (27 mm)

5/16" 1-3/16" mm) (30(8mm)

1-3/16" (30 mm)

1-3/8" (35 mm)

5/8” (16 mm)

22 mm (10 in.) 22 mm (16 in.) 22 mm (22 in.) 22 mm (10 in.) 22 mm (28 in.) 22 mm (16 in.) 22 mm (34 in.) 22 mm (22 in.) 22 mm (40 in.) 22 mm (28 in.) 22 mm (34 in.) 22 mm (40 in.) Controls up to 6.75 ft. (2 m) of Eurolinx Lights.

Part #

Description

L-EUL-GTD-1

27W Eurolinx Gradual Inline Touch Dimmer

Max load 27W.

5/8” (16 mm)

12VDC Elli® V Series

Part #

Description

L-LED-AGLPR-250CAL-1 22 mm (10 in.)

1/2” (13 mm)

5/16"1/2” (8 mm)

(13 mm) 3/8” (10 mm)

1-3/16" 3/8” (10 mm) (30 mm)

54°

1-1/16” (27 mm)

L-LED-AGLPR-711CAL-1 15 mm

737 mm (29”) Elli® V LED, 4800K, Aluminum

5/8 in. 15 mmL-LED-AGLPR-1016CAL-1 5/8 in.

1/4” 3/8” (6 mm) (10 mm)

4” (102 mm)

432 mm (17”) Elli® V LED, 4800K, Aluminum

22 mm (22 in.) 22 mm (28 in.) 22 mm (34 in.) 22 mm (40 in.)

54°

5/8” (16 mm)

1/2” 4”(13 mm) (102 mm) 3/8” (10 mm)

54°

279 mm (11”) Elli® V LED, 4800K, Aluminum

L-LED-AGLPR-406CAL-1 22 mm (16 in.)

1041 mm (41”) Elli® V LED, 4800K, Aluminum

L-LED-AGLPR-250WAL-1

279 mm (11”)Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-406WAL-1

432 mm (17”) Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-559WAL-1

584 mm (23”) Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-711WAL-1

737 mm (29”) Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-864WAL-1

889 mm (35”) Elli® V LED, 3500K, Aluminum

L-LED-AGLPR-1016WAL-1

1041 mm (41”) Elli® V LED, 3500K, Aluminum

Maximum continuous run 12 ft. (3.65 m) to prevent voltage drop. 16 ft. (4.88 m) maximum per power supply. 15 mm 5/8 in.

POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141. 1/4” COMPONENTS: 3/8” (6 mm) (10 mm)

1-800-227-1171 | trescolighting.com

Linear

All product dimensions and specifications are subject to change without prior notice. Required Optional

12VDC Elli 2 Series

2” ( 51 mm)

7/16” (11 mm) 7/16” (11 mm)

4” (102 mm)

Part #

Description

L-LED-SQPR-250CAL-1

279 mm (11”) Elli® 2 LED, 4800K, Aluminum

L-LED-SQPR-559CAL-1

584 mm (23”) Elli® 2 LED, 4800K, Aluminum

L-LED-SQPR-864CAL-1

889 mm (35”) Elli® 2 LED, 4800K, Aluminum

L-LED-SQPR-1016CAL-1

1041 mm (41”) Elli® 2 LED, 4800K, Aluminum

L-LED-SQPR-250WAL-1

279 mm (11”) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-406WAL-1

432 mm (17”) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-559WAL-1

584 mm (23”) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-711WAL-1

737 mm (29”) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-864WAL-1

889 mm (35”) Elli® 2 LED, 3500K, Aluminum

L-LED-SQPR-1016WAL-1

1041 mm (41”) Elli® 2 LED, 3500K, Aluminum

Maximum continuous run 12 ft. (3.65 m) to prevent voltage drop. 16 ft. (4.88 m) maximum per power supply. 4” Cord D 66. LED -Link

01-14-10

(102 mm)

1/2” (13 mm)

12VDC Starter Cord / Link Cord

Hole size:

1/2” (13 mm)

12VDC Power Supplies

12VDC 24V DC 120V

COMPO NENTS Power Supplies Controll ers Install Accessor ies

1-800227-117 1 | trescol ighting .com

141

For details see Power Supplies on Page 142.

Part #

Description

L-LED-LINKD-8-1

8 cm (3”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-15-1

15 cm (6”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-25-1

25 cm (10”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-60-1

60 cm (24”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-120-1

120 cm (48”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-180-1

180 cm (72”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-245-1

245 cm (96”) 12VDC Starter/Link/Extension Cord

Part #

Description

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT30-1

30W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT60-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DC-EQ30-1

30W 12VDC Equiline Power Supply w/6 Snap Block*

L-DC-EQ60-1

60W 12VDC Equiline Power Supply w/6 Snap Block*

L-DCE30D-CON-1

30W 12VDC Hardwire Dimmable LED Power Supply†

L-DCE60D-CON-1

60W 12VDC Hardwire Dimmable LED Power Supply†

L-12DCH60X1-1

60W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

L-12DCH60X3-1

180W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

4 mm) 04 mm) 04 mm)

Linear

All product dimensions and specifications are subject to change without prior notice.

2-1/4” (56 mm)

Power Cord

120V T5 Trescent® LED Series

3-9/16” (90 mm)

6’ (1.8 m)

1-7/16” (37 mm)

1-11/16” (42.5 mm)

90 Degree Adaptor

Wire mold knockout or conduit fitting

1/2” 13 mm

9/16” (15 mm)

ox w Switch HWB-S-4 (T4)

4/1/08 u3/22/09

9/16” (15 mm)

120V Hardwire Boxes

2-1/4”

34. L3 Metal(56 UClips mm)

46. Linking Cord

1-1/2” (40 mm)

063008

5/8” (15 mm)

15/16” 120V Hardwire Box Adaptor (24 mm)

34. L3 Metal UClips

T5 LED 3W 6500K 10.5" (267 mm)

L-LT53W-267C*-1

T5 LED 3W 5000K 10.5" (267 mm)

L-LT53W-267W*-1

T5 LED 3W 3000K 10.5" (267 mm)

L-LT54W-343D*-1

T5 LED 4W 6500K 13.5" (343 mm)

L-LT54W-343C*-1

T5 LED 4W 5000K 13.5" (343 mm)

L-LT54W-343W*-1

T5 LED 4W 3000K 13.5" (343 mm) 1-11/16” (42.5 mm) T5 LED 7W 6500K 22.5" (571 mm)

L-LT57W-571C*-1 10-1/2” (267 mm) L-LT57W-571W*-1 13-1/2” (343 mm) 22-1/2” (571 mm) L-LT514W-904D*-1 35-1/2” (904 mm) L-LT514W-904C*-1 47-1/2” (1204 mm) L-LT514W-904W*-1 59-1/4” (1504 mm) L-LT518W-1204D*-1

T5 LED 7W 5000K 22.5" (571 mm)

L-LT518W-1204C*-1

T5 LED 18W 5000K 47.5" (1204 mm)

L-LT518W-1204W*-1

T5 LED 18W 3000K 47.5" (1204 mm)

L-LT525W-1504D*-1

T5 LED 25W 6500K 59.25" (1504 mm)

L-LT525W-1504C*-1

T5 LED 25W 5000K 59.25" (1504 mm)

L-LT525W-1504W*-1

T5 LED 25W 3000K 59.25" (1504 mm)

3/4” (19 071008 mm)

T5 LED 7W 3000K 22.5" (571 mm) T5 LED 14W 6500K 35.5" (904 mm) T5 LED 14W 5000K 35.5" (904 mm) T5 LED 14W 3000K 35.5" (904 mm) T5 LED 18W 6500K 47.5" (1204 mm)

Part #

Description

L-HWB-WH-T5-1

T5 White Hardwire Box, without Switch

L-HWB-BL-T5-1

T5 Black Hardwire Box, without Switch

L-HWB-WH-T5-S-1

T5 White Hardwire Box, with Switch

L-HWB-BL-T5-S-1

T5 Black Hardwire Box, with Switch

*Adaptor cord is required for proper connection.

Part #

Hole Size, if Needed:

35. Linking Cord TRS5-LINKE

6’ L-LT53W-267D*-1

Optional

*For white fixture use (WH), for black use (BL). 6 ft. (1.8 m) starter cord, straight and 90° U-Clips, back-to-back connector and 90° Adaptor included.

7/8” (22 mm)

070908

3-9/16” (90 mm)

Description

L-LT57W-571D*-1

10-1/2” (267 mm) 13-1/2” (343 mm) 22-1/2” (571 mm) 35-1/2” (904 mm) 47-1/2” (1204 mm) 59-1/4” (1504 mm)

7/8” (22 mm)

Part # (1.8 m)

Power Cord

1-7/16” (37 mm)

Required

Description

L-LT5-HWBADP-BL-1

7/8” T5 LED Hardwire Box Adaptor, Black (22 mm)

L-LT5-HWBADP-WH-1

T5 LED Hardwire Box Adaptor, White

Part #

Description

L-TRS5-UCLP-M-1

Metal T5 Replacement U-clips, Set of 2

Part #

Description

L-LT5-LNK15-BL-1

6" (15 cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK15-WH-1

6" (15 cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK25-BL-1

10" (25 cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK25-WH-1

10" (25 cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK60-BL-1

24" (60 cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK60-WH-1

24" (60 cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK120-BL-1

48" (120 cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK120-WH-1

48" (120 cm) White T5 Trescent® LED Linking Cord

L-LT5-LNK180-BL-1

72" (180 cm) Black T5 Trescent® LED Linking Cord

L-LT5-LNK180-WH-1

72" (180 cm) White T5 Trescent® LED Linking Cord

u 032009

U Clips - Metal 063008

5/8” (15 mm)

13/16” (20 mm)

15/16” (24 mm)

120V Link Cord / Extension Wire mold knockout or conduit fitting

1/2” 13 mm

13/16” (20 mm) Hole Size, if Needed:

3/4” (19 mm)

1-1/2” (40 mm)

1-800-227-1171 | trescolighting.com

Photo by Ronnie Wood

Single Color

TAPE

1-800-227-1171 | trescolighting.com

12VDC 24V DC

TAPE

Single Color FlexTape® At a Glance All tape measured at 1' lengths.

1.5W FlexTape®

3W FlexTape®

4.4W FlexTape®

5.5W FlexTape®

COB FlexTape® 12VDC/ 24VDC

Tape Width

10 mm

Roll Length

20'

16.4'

13'

10'

13'/16.4'

16.4'

20'

16.4'

13'

Wattage

1.5W/ft.

3W/ft.

4.4W/ft.

5.5W/ft.

4.4W/ft. 5.5W/ft.

2.5W/ft.

1.5W/ft.

3W/ft.

4.4W/ft.

Lumens/ft.

150

365

420

615

245/420

195

135

255

395

Input Voltage

12VDC

12VDC/24VDC

12VDC

Beam Angle

115°

Max Continuous Run

20'

16.4'

13'

10'

13'/16.4'

16.4'

20'

16.4'

13'

Diode Life

50,000

25,000

CRI

>90

>83

Warranty

5 years

2 years

Color Temperatures

2700, 3000, 3500, 4800, 6500, Red, Blue

2700, 3000, 3500, 4800, 6500

2700, 3500, 4800, 6500

2700, 3000, 3500, 4800, 6500

Dimmable

Yes

Edge Emitting FlexTape®

1.5W Equiline Tape

3W Equiline Tape

4.4W Equiline Tape

115°

110°

115°

Safety Certifications

Note: Above chart represents averages per foot. Many factors can affect actual output.

1-800-227-1171 | trescolighting.com

12VDC

Tape

24V DC

Tape System Overview A unique design makes our Tape Lighting the most versatile LED light on earth. Curve them under frosted glass to create a stunning display or run them under shelving for continuous illumination. The tape features an adhesive backing for easy peel-and-stick installation.

Features: No soldering required - simple FlexConnect connectors White color printed board maximizes light output Lower heat, longer life than competing brands Available in multiple color temperatures and colors Cuttable and linkable Can be used with Infinex Series

Typical Applications: Store fixtures Edge lighting Backlighting Accent lighting Cove lighting Toe kick Soffit

Strong adhesive backing

Easy to use FlexConnect system with reliable connections

1-800-227-1171 | trescolighting.com

Sold by the roll

Tape

12VDC FlexTape®

Typical Setup:

12VDC Starter Cord

Mounting Block

(Included with power supply)

Power Supply

Controller

(18W Power Supply shown)

(Rotary Dimmer shown)

24V DC 24VDC COB FlexTape® 24VDC Starter Cord

24VDC Adaptor

(Barrel to AMP Adaptor)

Controller

(Rotary Dimmer shown)

Power Supply

(96W 24VDC Power Supply shown) Required Optional

Accessories:

12VDC Power Supplies see power supply section

Controllers

see controller section

24VDC Power Supplies see power supply section

12VDC Back-toBack Connector L-TPELNK-BTB-1

12VDC Starter Cord L-LED-TPEPKT-2M-1 L-TPEPKT-2IN-1

24VDC Back-toBack Connector L-XSBTB-1

24VDC Starter Cord L-24B2SPKT-2M-1

Right Angle Connector L-LED-TPELNK-CON90-1

1-800-227-1171 | trescolighting.com

12VDC Tee Starter Cord L-LED-TPEPKT-2M-TEE-1

24VDC Tee Starter Cord L-24B2SPKT-2M-TEE-1

Link Cord

L-LED-TPELNK-5-1 L-LED-TPELNK-15-1 L-LED-TPELNK-25-1 L-LED-TPELNK-60-1 L-LED-TPELNK-120-1 L-LED-TPELNK-180-1

FlexTape® 12VDC

FlexTape® 1.5W 1/8 in.

1/16 in. 1-1/2 mm

1.5W/ft. (4.9W/m)

(3 mm)

150 Lumens per ft. (492 per meter)

11/16 in. (17 mm)

1/16 in. (1-1/2 mm)

Dimensions:

7/64” (2.8 mm)

115°

11/16” (16 mm)

1/16” (1.5 mm)

Jumper Cord 1/16 in. 1-1/2 mm 1/8 in. (3 mm)

11/16 in. (17 mm)

1/16 in. (1-1/2 mm)

7/64” (2.8 mm)2”

3/8 in. (10 mm)

5/16” (7 mm)

(49 mm)

3/8”

1/16” (10 mm) (1.5 mm)

Cuttable every 2" (49 mm) 2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

Spool of LED FlexTape 20 ft. (6m)

7/64” (2.8 mm)

11/16” (17 mm)

1” (25 mm)

20' (6 m) roll length

1/16” (1.5 3/8” mm) (10 mm)

Hexhead Connector 1/2” (13 mm)

1/4” (6 mm)

79” (2 m)

1.5W/ft. (4.9W/m)

Lumens

Power Cord 2 m (79 in.)

Amp® Connector

Efficacy (lm/W)

Input Voltage

100

12VDC

Diode Life

Max Per(127 mm) Max 60W Power Continuous Cord 5 in. Supply DC-ELT60-CON Run (127 mm)

50,000 Hours

Photometric Data

RA N T

Mounting

Warranty

Beam Angle

Surface

5 Year

115°

Transformer

40' (12 m)

20' (6 m)

Color Temperature Warm White

Height

Light Output

1ft

49.2Fc

3ft

5.47Fc

(.3 m) (.9 m)

(1.8 m)

Warm to Neutral

(58.9lx) (14.7lx)

9.8ft L x 10ft W

2700K

19.5ft L x 20ft W

Warm (2700K)

(3 m L x 3 m W)

(5.9 m L x 6.1 m W)

3000K

4500K

Warm Neutral (3000K) (3500K)

Red Available

1/2”numbers and descriptions See page 86 for part (13 mm)

1-800-227-1171 | trescolighting.com

1/2” (13 mm)

Daylight

3.3ft L x 3.3ft W

L-LED-FLXTPE-CROLL-1 Tested

1/4” (6 mm)

Cool White

Beam Area (1 m L x 1 m W)

(529.6lx)

6ft 1.37Fc Hexhead Connector

Cord 5 in.

Mounting Block

150 per ft. (492 per m)

COMMERCIAL GRADE W

Specifications: Wattage Starter Cord

5 YEAR

1/2” (13 mm)

Blue Available

Cool (4800K)

5500K

6500K

Daylight (6500K)

1-1/2 mm 1/8 in. (3 mm)

FlexTape®

11/16 in. (17 mm)

12VDC

365 Lumens

3W/ft.

FlexTape® 3W

1/16 in. (1-1/2 mm)

per ft. (1197 per meter)

(9.8W/m)

7/64” (2.8 mm)

11/16” (16 mm)

Dimensions:

2” (49 mm)

1/16” (1.5 mm) 3/8” (10 mm)

1/4” (6.5 mm)

7/64” (2.8 mm)

115°

1/16” (1.5 mm)

Jumper Cord 1/16 in. 1-1/2 mm 1/8 in. (3 mm)

11/16 in. (17 mm)

1/16 in. (1-1/2 mm)

Cuttable every 1" (25 mm)

3/8 in. (10 mm)

1” 7/64” (25 mm)

(2.8 mm)

2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

11/16” (17 mm)

1/16” (1.5 mm)

Spool of LED FlexTape 20 ft. (6m)

16.4' (5 m) roll length

Hexhead Connector

1/4” (6 mm)

1/2” (13 mm)

Specifications:

5 YEAR

COMMERCIAL GRADE

1/2” (13 mm)

Wattage Starter Cord 79” (23W/ft. m)

(9.8W/m)

Amp® Connector

Efficacy (lm/W)

Lumens

365 per ft. (1197 per m)

120

Input Voltage

12VDC

Max Per Cord 60W Power 5 in. (127 mm) Supply

Diode Life

Mounting Block

Cord 5 in. (127 mm)

50,000 Hours

Photometric Data

Light Output

1ft

120Fc

(.3 m)

1/4”3ft (.9 m) (6 mm) 6ft

(1.8 m)

1/2” (13 mm)

(1219.7lx)

Surface

5 Year

Beam Angle

115°

Warm to Neutral

Cool White

Daylight

3.4ft L x 3.3ft W

(1.1 m L x 1 m W)

10.1ft L x 9.8ft W

2700K

3.33Fc

20.2ft L x 19.6ft W

Warm (2700K)

(13 mm)

16.4' (5 m)

Warm White

(3.1 m L x 3 m W)

1/2” (35.8lx)

Warranty

Beam Area

(143.2lx)

13.3Fc

Mounting

DC-ELT60-CON Transformer

20' (6 m)

Color Temperature

Hexhead Connector Height

Max Continuous Run

RA N T

Power Cord 2 m (79 in.)

(6.2 m L x 6 m W)

3000K

4500K

Warm Neutral (3000K) (3500K)

Cool (4800K)

5500K

6500K

Daylight (6500K)

Blue Available Red Available Amp® Connector See page 86 for part numbers and descriptions L-LED-FLXTPE-CRHO-1 Tested

1-800-227-1171 | trescolighting.com

FlexTape® 7/64” (2.81/16 mm)

12VDC

FlexTape® 4.4W

in. 1-1/2 mm

11/16” (16 mm)

4.4W/ft.

1/8 in.7/64” (2.8 mm) (3 mm)

(14.4W/m)

1/16” (1.5 mm)

420Lumens

5/16” 11/16 (7 mm)

in. (17 mm)

1/16” 1/16 (1.5 mm)

in. (1-1/2 mm)

Dimensions:

7/64” (2.8 mm)

115°

per ft. (1378 per meter)

11/16” (17 mm)

1/16” (1.5 mm)

Jumper Cord 1/16 in. 1-1/2 mm 1/8 in. (3 mm)

11/16 in. (17 mm)

1/16 in. (1-1/2 mm)

2” (49 mm)

Cuttable every 2" (49 mm) 2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

3/8 in. (10 mm)

3/8” (10 mm)

Spool of LED FlexTape 20 ft. (6m)

13' (3.96 m) roll length

1” (25 mm)

3/8” (10 mm)

Hexhead Connector

Specifications:

1/2” (13 mm)

1/4” (6 mm)

Diode Life Mounting Block

420 per ft. (1378 per m)

12VDC

50,000 Hours

Photometric Data

Max Per 60W Power Cord 5 in. Supply (127 mm)

Cord 5 in. (127 mm)

Max Continuous DC-ELT60-CON Run

Mounting

Warranty

Beam Angle

Surface

5 Year

115°

RA N T

Transformer

13' (3.96 m)

Color Temperature

Height

Light Output

1ft

140Fc

3ft

15.5Fc

(166.8lx)

(3 m L x 3 m W)

6ft

3.88Fc

19.4ft L x 19.7ft W

(.3 m) (.9 m) (1.8 m)

(1507lx)

(41.8lx)

Beam Area

Warm White

Warm to Neutral

Daylight

3.2ft L x 3.3ft W 9.7ft L x 9.8ft W

(5.9 m L x 6 m W)

2700K

Warm (2700K)

3000K

Warm Neutral (3000K) (3500K)

Hexhead Connector See page 86 for part numbers and descriptions 1/2” (13 mm)

Cool White

(.98 m L x .91 m W)

L-FLXTPE-CRV-1 Tested

79” (2 m)

Input Voltage

COMMERCIAL GRADE

Power Cord 2 m (79 in.)

Amp® Connector

Efficacy (lm/W)

Wattage Starter Cord Lumens

4.4W/ft. (14.4W/m)

5 YEAR

1/2” (13 mm)

1-800-227-1171 | trescolighting.com

4500K

Cool (4800K)

5500K

6500K

Daylight (6500K)

FlexTape® 12VDC

FlexTape® 5.5W

5.5W/ft.

615 Lumens

115°

per ft. (2017 per meter)

(18W/m)

Only to be used with Infinex Dimensions:

7/64” (2.8 mm)

1/2” (12 mm) 1/2”

7/64” (2.8 mm)

1/16” (1.51/16” mm)

(12 mm)

(1.5 mm)

Jumper Cord 1/16 in. 1-1/2 mm 1/8 in. (3 mm)

11/16 in. (17 mm)

1-1/2” (38 mm)

1/16 in. (1-1/2 mm)

Cuttable every 1-1/2" (38 mm)(492”mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

3/8 in. (10 mm)

1-1/2” (38 mm)

3/8” 3/8” mm) (10(10mm)

Spool of LED FlexTape 20 ft. (6m)

10' (3 m) roll length

Hexhead Connector

1/4” (6 mm)

1/2” (13 mm)

Wattage

5 YEAR

COMMERCIAL GRADE

1/2” (13 mm)

Specifications:

Efficacy (lm/W)

Lumens

Starter Cord 79” (2 m) 5.5W/ft. 615 per ft. (18W/m) (2017 per m)

Amp® Connector

Input Voltage

112

12VDC

Diode Life

Mounting Block

50,000 Hours

Photometric Data

Max Per 60W Power Supply

Max Continuous Run

Cord 5 in. (127 mm)

RA N T

Power Cord 2 m (79 in.)

Mounting

Warranty

Surface

5 Year*

Beam Angle

DC-ELT60-CON Transformer

10' (3 m)

115°

Color Temperature

Height

Light Output

1ft

205Fc

3ft

22.8Fc (245lx)

(3 m L x 2.8 m W)

6ft

5.69Fc

19.9ft L x 18.6ft W

(.3 m) (.9 m) (1.8 m)

(2207lx)

(61.3lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

3.3ft L x 3.1ft W

(1 m L x .94 m W)

10ft L x 9.3ft W

(6 m L x 5.6 m W)

2700K

Warm (2700K)

3000K

Warm Neutral (3000K) (3500K)

4500K

Cool (4800K)

5500K

6500K

Daylight (6500K)

L-FLXTPE-48RU-1 Tested

*MUST USE PROPER HEAT SINK (i.e. Infinex Aluminum Extrusions)

See page 86 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

FlexTape®

Edge Emitting FlexTape®

12VDC

2.5W/ft.

194 Lumens

110°

per ft. (636 per meter)

(8.2W/m)

Dimensions:

1/8” (3 mm)

3/8” (10 mm) 3/8”

1/8” (3 mm)

5/64” 5/64” (2 mm)

(10 mm)

(2 mm)

Jumper Cord 1/16 in. 1-1/2 mm

Cuttable every 1-1/4" (31 mm)

1/8 in. (3 mm)

11/16 in. (17 mm)

1-1/4” 1-1/4” (31 mm)(31 mm)

1/16 in. (1-1/2 mm)

2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

3/8 in. (10 mm)

3/8”3/8” mm) (10 (10 mm)

Spool of LED FlexTape 20 ft. (6m)

16.4' (5 m) roll length

Hexhead Connector

2.5W/ft. (8.2W/m)

Efficacy (lm/W)

Lumens Starter Cord 79” (2 m)

Power Cord 2 m (79 in.)

Amp® Connector

Input Voltage

12VDC

Diode Life

50,000 Hours

Photometric Data

RA N T

24' (7.3 m)

Warranty

Beam Angle

Transformer

16.4' (5 m)

Surface

110°

5 Year

Color Temperature

Height

Light Output

1ft

80Fc

3ft

8.90Fc (9.7lx)

(2.9 m L x 2.5 m W)

6ft

2.22Fc

18.9ft L x 16.7ft W

(.3 m) (.9 m) (1.8 m)

(861.1lx)

(23.7lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

3.1ft L x 2.8ft W

(.94 m L x .85 m W)

9.4ft L x 8.3ft W

(5.8 m L x 5.1 m W)

L-FLXTPE-65EER-1 Tested

2700K

3000K

Warm (2700K)

4500K

Neutral (3500K)

See page 87 for part numbers and descriptions 78

Cord 5 in.

Max Per Max(127 mm) 60W Power Continuous Mounting Cord 5 in. Supply (127 Run DC-ELT60-CON mm)

Mounting Block

194 per ft. (636 per m)

COMMERCIAL GRADE W

1/2” (13 mm)

Specifications: Wattage

5 YEAR

1/2” (13 mm)

1/4” (6 mm)

1-800-227-1171 | trescolighting.com

Cool (4800K)

5500K

6500K

Daylight (6500K)

Economy Series

1/16 in. 1-1/2 mm

12VDC

EquiLine Tape LED 1.5W

1.5W/ft. 1/8 in. (3 mm)

(4.9W/m)

EquiLine Tape LED

135 Lumens per ft. (443 per meter)

115°

11/16 in. (17 mm)

1/16 in. (1-1/2 mm)

Dimensions:

9/64” (3.5 mm)

11/16” (16 mm)

1/16” (1.8 mm)

Jumper Cord 1/16 in. 1-1/2 mm 1/8 in. (3 mm)

Cuttable every 2" (49 mm)

7/64”2” (2.8 mm) (49 mm)

11/16 in. (17 mm)

2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

3/8” (101/16” mm)

5/16” (7 mm)

1/16 in. (1-1/2 mm)

3/8 in. (10 mm)

(1.5 mm)

Spool of LED FlexTape 20 ft. (6m)

7/64” (2.8 mm)

11/16” (17 mm)

1” (25 mm)

1/16” 3/8” (1.5 mm)

(10 mm)

20' (6 m) roll length

Hexhead Connector 1/2” (13 mm)

1/4” (6 mm)

1/2” (13 mm)

Specifications: Wattage

1.5W/ft. (4.9W/m)

Efficacy Lumens Starter Cord 79”(lm/W) (2 m) 135 per ft. (443 per m)

Input Voltage

Power Cord 2 m (79 in.)

Amp® Connector

Diode Life

Max Continuous Cord 5 in. (127 mm) Run

Mounting

Warranty

Beam Angle

40' (12 m)

20' (6 m)

Surface

2 Year

115°

Cool White

Daylight

Mounting Block

12VDC

25,000 Hours

Photometric Data

Cord 5 in. (127 mm)

Max Per 60W Power Supply

DC-ELT60-CON Transformer

Color Temperature

Height

Light Output

1ft

44.1Fc

(.3 m)

(474.6lx)

Beam Area 3.1ft L x 3.3ft W

Hexhead Connector

9.4ft L x 9.8ft W

4.9Fc

(52.7lx)

(2.9 m L x 3 m W)

6ft

1.23Fc

18.8ft L x 19.6ft W

(1.8 m)

(13.3lx)

(5.7 m L x 6 m W)

L-TPELED-48SER-1 1/2” Tested

1/4”

Warm to Neutral

(.9 m L x 1 m W)

3ft

(.9 m)

Warm White

2700K

Warm (2700K)

3000K

Warm Neutral (3000K) (3500K)

4500K

Cool (4800K)

5500K

6500K

Daylight (6500K)

(13 mm)

See page 87 for part numbers and descriptions (6 mm)

1/2” 1-800-227-1171 | trescolighting.com (13 mm)

1/8 in. (3 mm)

EquiLine Tape LED Economy Series

12VDC

EquiLine Tape LED 3W

11/16 in. (17 mm)

3W/ft.

1/16 in. (1-1/2 mm)

255 Lumens per ft. (836 per meter)

(9.8W/m)

9/64” (3.5 mm)

115°

11/16” (16 mm)

Dimensions:

1/16” (1.83/8” mm)

2” (49 mm)

(10 mm)

1/4” (6.5 mm)

9/64” (3.5 mm)

1/16” (1.8 mm)

Jumper Cord 1/16 in. 1-1/2 mm 1/8 in. (3 mm)

11/16 in. (17 mm)

1” (25 mm)

7/64” (2.8 mm)

1/16 in. (1-1/2 mm)

Cuttable every 1" (25 mm) 2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

3/8 in. (10 mm)

11/16” (17 mm)

1/16” (1.5 mm) Spool of LED FlexTape 20 ft. (6m)

16.4' (5 m) roll length

Hexhead Connector

Specifications: Wattage

3W/ft. (9.8W/m)

1/4” (6 mm)

1/2” (13 mm)

Efficacy (lm/W)

Lumens Starter Cord 79” (2 m)ft. 255 per

Input Voltage

(836 per m)

Photometric Data

1/2” (13 mm)

Amp® Connector

Diode Life

12VDC

25,000 Hours

Hexhead Connector Height

Light Output

1ft

83.9Fc

(.9 m)

(100.3lx)

(.3 m)

1/4” (903.1lx) 3ft (6 mm) 9.32Fc 6ft

(1.8 m)

Beam Area

Mounting Block

Cord 5 in. (127 mm)

20' (6 m)

16.4' (5 m)

DC-ELT60-CON Transformer

Surface

Warranty

Beam Angle

2 Year

115°

Cool White

Daylight

Color Temperature

Warm White

Warm to Neutral

9.5ft L x 9.9ft W

(2.9 m L x 3 m W)

19.1ft L x 19.9ft W (5.8 m L x 6.1 m W)

2700K

Warm (2700K)

3000K

Amp® Connector

Warm Neutral (3000K) (3500K)

L-TPELED-48HER-1 Tested

See page 87 for part numbers and descriptions 80

Power Cord 2 m (79 in.)

Max ContinuousCord Mounting 5 in. Run (127 mm)

1/2” 3.2ft L x 3.3ft W (13 mm) (1 m L x 1 m W)

1/2” 2.33Fc (13 mm) (25.1lx)

Max Per 60W Power Supply

1-800-227-1171 | trescolighting.com

4500K

Cool (4800K)

5500K

6500K

Daylight (6500K)

Economy Series

1/8 in. (3 mm)

12VDC

EquiLine Tape LED 4.4W

11/16 in. EquiLine Tape LED 1/16 in. (17 mm) (1-1/2 mm)

4.4W/ft.

395 Lumens

115°

per ft. (1296 per meter)

(14.4W/m)

Dimensions:

2” (49 mm)

1/16” (1.4 mm)

3/8” (10 mm)

5/16” (8 mm)

1/16” (1.3 mm)

Jumper Cord 1/16 in. 1-1/2 mm 1/8 in.

(3 mm) Cuttable every 1" (25 mm)

11/16 in. (17 mm)

1” (25 mm)

1/16 in. (1-1/2 mm)

2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

3/8 in. (10 mm)

Spool of LED FlexTape 20 ft. (6m)

13' (3.96 m) roll length

Hexhead Connector

Wattage

4.4W/ft. (14.4W/m)

1/2” (13 mm)

1/4” (6 mm)

Specifications:

1/2” (13 mm)

Lumens Starter Cord 79” (2 m)

Efficacy (lm/W)

395 per ft. (1296 per m)

Amp® Connector

Input Voltage

Diode Life

Height 1ft

(.3 m)

3ft

(.9 m)

6ft

(1.8 m)

Max Per 60W Power Supply

Max Continuous Run

Cord 5 in. (127 mm)

Mounting Block

12VDC

25,000 Hours

Hexhead Connector

Photometric Data

Power Cord 2 m (79 in.)

Light Output 135Fc 1/4” (6 (1453lx) mm) 14.9Fc

(160.4lx)

3.74Fc

(40.3lx)

Beam1/2” Area (13 mm) 3.4ft L x 3.3ft W

13' (3.96 m)

Cord 5 in. (127 mm)

Mounting

Warranty

Beam Angle

2 Year

115°

Cool White

Daylight

DC-ELT60-CON Transformer

13' (3.96 m)

Surface

Color Temperature

Warm White

Warm to Neutral

(1 m L x 1 m W)

10.1ft L x 10ft W

1/2” (3.1 m L x 3 m W) (13 mm)

2700K

3000K

20.2ft L x 20.0ft W (6.2 m L x 6.1 m W)

Warm (2700K)

Amp® Connector

Warm Neutral (3000K) (3500K)

L-TPELED-48VER-1 Tested

4500K

Cool (4800K)

5500K

6500K

Daylight (6500K)

See page 87 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

12VDC

COB FlexTape®

245 Lumens

4.4W/ft.

per ft.

(14.5W/m)

115°

(809 per meter)

Chip on Board or “COB” LED tape is the latest advancement in tape lighting. With diodes directly mounted on a printed circuit board and a continuous fortified coating, this flexible, high density LED lighting strip creates our Luniform look without dark spots – no covers or filters needed!

Features: New generation of tape lighting 115° beam angle Available in 2700K, 3000K, 3500K, 4800K or 6500K Wattage: 4.4W/ft. – 13’ (4 m) roll Cuttable every 11/16” (18 mm) High-density lighting Can be used with Infinex extrusions (sold separately) Indoor use only Typical Applications: Store fixtures Edge lighting Backlighting Accent lighting Cuttable every 11/16” (18 mm)

Cove lighting

Encapsulated diodes are protected from splashes, dust and moisture.

Toe kick COB FlexTape - 12V & 24V 8/3/20 COB FlexTape - 12V & 24V 8/3/20 Soffit

5 YEAR

COMMERCIAL 3/8” GRADE Y AR (103/8” mm) RA N T 1/16” (10 mm) 1/16” (1.5 mm) (1.5 mm)

Dimensions: 11/16” 11/16” (18 mm) (18 mm) + +

Sold by the roll

-12V -12V

+12V +12V

+ +

+12V +12V

-12V -12V

+12V +12V

-12V -12V

3/8” (103/8” mm) (10 mm)

3/8” (103/8” mm) (10 mm) 1/16” 1/16” (1.5 mm) (1.5 mm)

1-1/2” 1-1/2” (38 mm) (38 mm)

Strong 300 LSE 3MTM adhesive backing + +

-24V 1-800-227-1171 | trescolighting.com -24V

+24V +24V

+ +

-24V -24V

+24V +24V

3/8” (103/8” mm) (10 mm)

COB FlexTape® Typical Setup: 12VDC COB FlexTape®

Starter Cord

Mounting Block

(Included with power supply)

Power Supply

Controller

(18W Power Supply shown)

(Rotary Dimmer shown)

Required Optional

Accessories:

Starter Cord

Power Supplies

L-LED-TPEPKT-2M-1 L-TPEPKT-2IN-1

see power supply section

Right Angle Connector L-LED-TPELNK-CON90-1

Specifications:

Tee Starter Cord

L-LED-TPEPKT-2M-TEE-1

Tee Connector

Back-to-Back Connector

Controllers

see controller section

L-LED-TPELNK-TEE-1

L-XSBTB-1

Link Cord

L-LED-TPELNK-5-1 L-LED-TPELNK-15-1 L-LED-TPELNK-25-1 L-LED-TPELNK-60-1 L-LED-TPELNK-120-1 L-LED-TPELNK-180-1

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per Power Supply 60W (12VDC)

Max Continuous Run

Mounting

Warranty

Beam Angle

4.4W/ft. (14.5W/m)

245 per ft. (809 per m)

55.7

12VDC

50,000 Hours

13' (4 m)

Surface

5 year

115°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

74.7Fc

3.1ft L x 10.9ft W (.94 m L x 3.3 m W)

3ft

8.3Fc

9.3ft L x 32.6ft W (2.8 m L x 9.9 mW)

6ft

2.07Fc

18.6ft L x 65.2ft W (5.7m L x 19.9 m W)

(.3 m) (.9 m) (1.8 m)

(804lx)

(89.3lx) (22.3lx)

Warm White

2700K

Warm (2700K)

Warm to Neutral

3000K

Warm Neutral (3000K) (3500K)

Cool White

4500K

Cool (4800K)

Daylight

5500K

6500K

Daylight (6500K)

L-FLXCOB12-48RV-1 Tested

See page 88 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

24V DC

COB FlexTape®

420Lumens

5.5W/ft.

per ft.

(18.1W/m)

115°

(1386 per meter)

Features: New generation of tape lighting 115° beam angle Available in 2700K, 3000K, 3500K, 4800K or 6500K Wattage: 5.5W/ft. – 16.4’ (5 m) roll Cuttable every 1-1/2” (38 mm) High-density lighting Can be used with Infinex extrusions (sold separately) Indoor use only

COB FlexTape - 12V & 24V

8/3/20

Typical Applications:

3/8” (10 mm)

Store fixtures

1/16” (1.5 mm)

Edge lighting

Cuttable every 1-1/2” (38 mm)

Backlighting 11/16”

3/8” (10 mm)

(18 mm)

Accent lighting +

+12V

Cove lighting -12V

Encapsulated diodes are protected from splashes, dust and moisture.

+12V

-12V

+12V

-12V

Toe kick COB FlexTape - 12V & 24V Soffit

8/3/20 5 YEAR

3/8” 3/8” (10 mm) (10 mm)

COMMERCIAL GRADE W

1/16” 1/16” (1.5 mm) (1.5 mm)

Dimensions: 11/16”1-1/2” (38 mm) (18 mm) +

Sold by the roll

-24V

-12V

+12V

+24V

-12V

+12V

3/8” (10 mm) +

+12V

-24V

-12V

3/8” (10 mm)

+24V

3/8” (10 mm)

1-1/2” (38 mm)

Strong 300 LSE 3MTM adhesive backing +

-24V 1-800-227-1171 | trescolighting.com

1/16” (1.5 mm)

3/8” (10 mm) +24V

-24V

+24V

RA N T

COB FlexTape® Typical Setup:

24VDC COB FlexTape® 24VDC Starter Cord 24VDC Adaptor

(Barrel to AMP Adaptor)

Controller

(Rotary Dimmer shown)

Required

Power Supply

Optional

(96W 24VDC Power Supply shown)

Accessories:

24VDC Starter Cord 24VDC Tee Starter Cord L-24B2SPKT-2M-1

Power Supplies see power supply section

Controllers

L-24B2SPKT-2M-TEE-1

see controller section

Link Cord

Back-to-Back Connector

L-LED-TPELNK-5-1 L-LED-TPELNK-15-1 L-LED-TPELNK-25-1 L-LED-TPELNK-60-1 L-LED-TPELNK-120-1 L-LED-TPELNK-180-1

L-XSBTB-1

Specifications:

Right Angle Connector

Tee Connector

L-LED-TPELNK-CON90-1

L-LED-TPELNK-TEE-1

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per Power Supply 96W

Max Continuous Run

Mounting

Warranty

Beam Angle

5.5W/ft. (18.1W/m)

420 per ft (1386 per m)

76.4

24VDC

50,000 Hours

16.4' (5 m)

Surface

5 year

115°

Photometric Data

Color Temperature

Height

Light Output

Beam Area

1ft

123Fc

3.1ft L x 8.5ft W (.94 m L x 2.6 m W)

3ft

13.6Fc

9.3ft L x 32.6ft W (2.9 m L x 7.8m W)

6ft

3.41Fc

18.7ft L x 51.2ft W (5.7 m L x 15.6 m W)

(.3 m) (.9 m) (1.8 m)

(1324lx) (146.3lx) (36.7lx)

L-FLXCOB24-48RU-1 Tested

Warm White

2700K

Warm (2700K)

Warm to Neutral

3000K

Warm Neutral (3000K) (3500K)

Cool White

4500K

Cool (4800K)

Daylight

5500K

6500K

Daylight (6500K)

See page 90 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

1/16 in.

Single Color Tape

5 mm 3/16 in.

10 mm 3/8 in.

All product dimensions and specifications are subject to change without prior notice.

Spool of LED FlexTape 6 m (20 ft.)

Part #

12VDC FlexTape® 1.5W

1/16 in. L-LED-FLXTPE-WROLL-1 1-1/2 mm 1/8 in. (3 mm)

7/64” (2.8 mm)

Amp® 3 mm 1/8Connector in.

17 mm 11/16 in.

11/16” (16 mm)

7/64” (2.8 mm)

5 mm 3/16 in.

1/16” (1.5 mm)

Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

L-FLXTPE-30RS-1

20' (6 m) 12VDC 3000K FlexTape® Roll

L-LED-FLXTPE-NROLL-1 11/16 in.

20' (6 m) 12VDC 3500K FlexTape® Roll

1/16 in. (17 mm) L-LED-FLXTPE-CROLL-1

Cord 127 mm (5 in.)

5/16”Cord (7 mm) 127 mm

1/8 in. (3 mm)

1/16” DC-ELT60-CON Transformer (1.5 mm)

(5 in.)

10 mm Mounting Block 3/8 in.

12VDC FlexTape® 3W 7/64” (2.8 mm)

7/64” (2.8 mm) 3 mm 1/8 in.

17 mm 11/16 in. Amp® Connector

1-1/2 mm 1/16 in.

7/64” (2.8 mm)

1/16” (1.5 mm)

Jumper Cord 127 mm 5 in.

1/4” (6.5 mm)

Maximum continuous run is 20' (6 m). Maximum per power supply is2040' m). ft.(12 (6m) Mounts with adhesive backing. Cuttable every 2" (49 mm). To be used on clean, TM smooth surfaces. Pressure must be applied for proper 3M tape adhesion.

L-FLXTPE-30RH-1

16.4' (5 m) 12VDC 3000K High Output FlexTape® Roll

L-LED-FLXTPE-NRHO-1

16.4' (5 m) 12VDC 3500K High Output FlexTape® Roll

L-LED-FLXTPE-CRHO-1

16.4' (5 m) 12VDC 4800K High Output FlexTape® Roll

3/8” L-LED-FLXTPE-DRHO-1 (10 mm)

16.4' (5 m) 12VDC 6500K High Output FlexTape® Roll

L-LED-FLXTPE-RRHO-1

16.4' (5 m) 12VDC Red High Output FlexTape® Roll

L-LED-FLXTPE-BRHO-1

16.4' (5 m) 12VDC Blue High Output FlexTape® Roll

10 mm

1” 3/8 in. (25 mm)

3/8” (10 mm)

Power Cord 2 m (79 in.)

1/16” (1.5Cord mm) 127 mm

DC-ELT60-CON Transformer

1/2” (13 mm)

Mounting Block

7/64” (2.8 mm)

11/16” 1/4” 12VDC FlexTape® 4.4W (6 mm) (17 mm)

1/16” (1.51/2” mm)

11/16” 16 mm

Starter Cord 2.8 mm 79” (2 m) 7/64”

1-1/2 mm 1/16 in.

5/16” 7 mm

1-1/2 mm 1/16 in.

Description 13' (4 m) 12VDC 2700K High Output FlexTape® Roll

1/16 in. (1-1/2 mm) 13' (4 m) 12VDC 3000K High Output FlexTape® Roll

L-FLXTPE-30RV-1

13' (4 m) 12VDC 3500K High Output FlexTape® Roll (127 mm)

L-FLXTPE-CRV-1

13' (4 m) 12VDC 4800K High Output FlexTape® Roll

L-FLXTPE-DRV-1

5 in. DC-ELT60-CON 13' (4 m) 12VDC 6500K High Output FlexTape® Roll (127 mm)

Cord

Mounting Block

3/8” (10 mm)

(13Cord mm) 127 mm (5 in.)

Cord 127 mm (5 in.)

Mounting Block

1/2” (13 mm) DC-ELT60-CON Transformer

12VDC FlexTape® 5.5W

Starter Cord 79” (2 m)

Amp® Connector Part #

Spool of1” LED FlexTape 6 m (20 (25ft.)mm)

3/8” (10 mm)

Connector

1/2” (12 mm)

1/16” (1.5 mm)

Description

L-FLXTPE-30RU-1

(127 mm) 10' (3 m) 12VDC 3000K Ultra Output FlexTape® Roll

L-FLXTPE-48RU-1 1/2” L-FLXTPE-65RU-1 (12 mm)

1/16” (1.5 mm)

1-1/2” (38 mm)

Power Cord 2 m (79 in.)

3/8” (10 mm)

5 in.

10' (3 m) 12VDC 3500K Ultra Output FlexTape® Roll Cord 5 in. DC-ELT60-CON (127Ultra mm) Output FlexTape® Roll 10' (3 m) 12VDC 4800K Transformer Mounting Block 10' (3 m) 12VDC 6500K Ultra Output FlexTape® Roll Maximum continuous run is 10' (3 m). Maximum per power supply is 10' (3 m). Mounts with adhesive backing. Cuttable every 1-1/2" (38 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion. MUST USE PROPER HEAT SINK (i.e. Infinex Aluminum Extrusions)

Cord 127 mm (5 in.)

Hexhead Connector 1-1/2” Mounting Block (38 mm)

Cord 127 mm (5 in.)

1/4” (6 mm)

DC-ELT60-CON

3/8”Transformer (10 mm) 1/2” (13 mm) 1/2” (13 mm)

P 2

Cord 10' (3 m) 12VDC 2700K Ultra Output FlexTape® Roll

Connector

7/64” (2.8 mm) Amp®

Transformer

Maximum continuous run is 13' (4 m). Maximum per power supply is Spool of LED Flex 13' (4 m). Mounts with adhesive backing. Cuttable every 2" (49 mm). To be 20 ft. (6m) TM used on clean, smooth surfaces. Pressure must be applied for proper 3M tape adhesion.

L-FLXTPE-27RU-1 L-FLXTPE-35RU-1 7/64” (2.8 mm)

Power 3/8 in.Cor 2 m (79 in (10 mm)

Cord 5 in.

L-FLXTPE-NRV-1

Power Cord 10 mm 2 m (79 in.) 3/8 in.

1/16” 1/2” 1.5 mm

1/4” (6 mm)

10 mm 3/8 in.

Part #

Amp® 11/16 in. L-FLXTPE-WRV-1 Connector (17 mm)

2” (49 mm)

Jumper Cord 127 mm 5 in.

11/16” 17 mm

5 mm 3/16 in.

1/16 in. 1-1/2 mm

1/16” 1.5 mm

Hexhead Connector

7/64” 2.8 mm

Amp® 17 mm Connector 11/16 in.

1/16” 1.5 mm

Spool of LED FlexTa 20 ft. (6m)

Spool of LED FlexTape 6 m (20 ft.)

1/8 in. (3 mm)

(13 mm)

7/64” 2.8 mm

3/8 in. (10 mm)

Maximum continuous run is 16.4' (5 m). Maximum per power supply is 20' (6 m). Mounts with adhesive backing. Cuttable every 1" (25 mm). To be used on clean, smooth surfaces. Pressure must be applied Jumper Cord for proper 3MTM tape adhesion.

(5 in.)

Cord 127 mm (5 in.)

10 mm 3/8 in.

3 mm 1/8 in.

Spool of LED FlexTape

3/8” (10 mm)

Hexhead Connector

5 mm 3/16 in.

nnector

20' (6 m) 12VDC Red FlexTape® Roll Jumper Cord

1/16 in. Description 3/8” (1-1/2 mm) (10 mm) L-LED-FLXTPE-WRHO-1 16.4' (5 m) 12VDC 2700K High Output FlexTape® Roll

1/16” (1.5 mm)

11/16” (16 mm)

1-1/2 mm 1/16 in.

20' (6 m) 12VDC Blue FlexTape® Roll

L-LED-FLXTPE-RROLL-1

11/16 in. Part (17 # mm)

2” (49 mm)

nnector

L-LED-FLXTPE-BROLL-1

Spool of LED FlexTape 6 m (201”ft.)

(25 mm)

11/16” (17 mm)

3/8 in. (10 mm)

20' (6 m) 12VDC 6500K FlexTape® Roll

Power Cord

2”

Optional

20' (6 m) 12VDC 4800K FlexTape® Roll

L-LED-FLXTPE-DROLL-1

10 in. mm 2 m (79 in.) 1/16 (49 mm) 3/8 in. 1-1/2 mm

Required

20' (6 m) 12VDC 2700K FlexTape® Roll

(1-1/2 mm)

1-1/2 mm 1/16 in.

Jumper Cord

Description

1-800-227-1171 | trescolighting.com Amp® Connector

1/16 in.

Single Color Tape

5 mm 3/16 in.

10 mm 3/8 in.

Optional

12VDC Edge Emitting FlexTape®

1/8” (3 mm)

1-1/2 mm 1/16 in. 3 mm 1/8 in.

17 mm 11/16 in.

1/8” (3 mm)

3/8” (10 mm)

5 mm 3/16 in.

Amp® Connector

5/64” (2 mm)

16.4' (5 m) 12VDC 2700K Edge Emitting FlexTape® LED Roll

L-FLXTPE-35EER-1

16.4' (5 m) 12VDC 3500K Edge Emitting FlexTape® LED Roll

3/8” L-FLXTPE-48EER-1

16.4' (5 m) 12VDC 4800K Edge Emitting FlexTape® LED Roll

L-FLXTPE-65EER-1(2 mm)

16.4' (5 m) 12VDC 6500K Edge Emitting FlexTape® LED Roll

5/64”

Part #

Equiline 20' (6 m) Roll Tape LED 2700K

L-TPELED-30SER-1 11/16 in. (17 mm) L-TPELED-35SER-1

L-TPELED-48SER-1

17 mm 11/16 in.

Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

9/64” (3.5 mm)

10 mm 1/16 3/8 in.in. 1-1/2 2” mm

1/16” 1/8 in. (1.8 mm) (3 mm)

10 mm 3/8 in.

Spool of LED FlexTape 6 m (20 ft.)

Cord 127 mm (5 in.)

11/16” (17 mm)

9/64” (3.5 mm)

17 mm 11/16 in.

1-1/2 mm 1/16 in.

9/64” (3.5 mm)

Amp® Connector

10 mm 3/8 in.

1/4” (6 mm)

Cord 127 mm (5 in.)

7/64” 12VDC Equiline Tape LED 4.4W Mounting Block 11/16” (2.8 mm) (17 mm) 1/16” (1.5 mm)

Equiline 16.4' (5 m) Roll Tape LED 2700K Equiline 16.4' (5 m) Roll Tape LED 3000K

L-TPELED-35HER-1

Equiline 16.4' (5 m) Roll Tape LED 3500K

3/8” (10 mm)

11/16 in. (17 mm)

Power Cord 2 m (79 in.)

Hexhead Connector 1/16” (1.3 mm)

Amp® Connector Cord

127 mm 1/4” (5 in.) (6 mm) Cord 127 mm (5 in.)

(10 mm)

1/16 in. (1-1/2 mm)

Part #

Description

Amp® L-TPELED2-27VER-1

Equiline 13' (3.96 m) Roll Tape LED 2700K

L-TPELED2-30VER-1

Equiline 13' (3.96 m) Roll Tape LED 3000K

Connector

Power Cord 2 m (79 in.)

Cord 5 in.

Spool of LED FlexTape 20 ft. (6m)

Equiline 13' (3.96 m) Roll Tape LED(127 3500K mm)

L-TPELED2-48VER-1

Equiline 13' (3.96 m) Roll Tape LED 4800K Cord

L-TPELED2-65VER-1

(127 mm) Equiline 13' (3.96 m) Roll Tape LED 6500K Transformer

1” (25 mm)

3/8” (10 mm)

Power Cord 2 m (79 in.)

DC-ELT60-CON

5 in.

Mounting Block

Maximum continuous run is 13' (3.96 m). Maximum per power supply is 13' (3.96 m). Mounts with adhesive backing. Cuttable every 1" (25 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

Amp® Connector Cord 5 in. (127 mm)

Starter Cord 79” (2 m)

Hexhead Connector

1/4” (6 mm)

1/2” (13 mm) 1/2” (13 mm)

3/8 in. (10 mm)

Spool of LED Fl 20 ft. (6m)

Equiline 16.4' (5 m) Roll Tape LED Jumper 6500K Cord

1/2” (13 mm)

1/2” DC-ELT60-CON (13 mm) Transformer

Mounting Block

Equiline 16.4' (5 m) Roll Tape LED 4800K

3/8” (10 mm)

2” L-TPELED2-35VER-1 3/8” (49 mm) (10 mm)

Starter Cord 79” (2 m)

1/16 in. (1-1/2 mm) Description

L-TPELED-30HER-1

1” (25 mm)

Spool1/2” of LED FlexTape (13 6 mmm) (20 ft.)

DC-ELT60-CON Transformer 1/2” (13 mm)

Equiline 20' (6 m) Roll Tape LED 4800K

Maximum continuous run is 20' (6 m). Maximum per power supply is 40' (12 m). Mounts with adhesive backing. Cuttable every 2" (49 mm). To be used on clean, Spool of LED FlexTape adhesion. smooth surfaces. Pressure must be applied for proper 3MTM 20 tape ft. (6m)

1/16 in. 1-1/2 mm

1/8 in. 1/16” (3 mm) Hexhead(1.8 Connector mm)

Equiline 20' (6 m) Roll Tape LED 3500K

L-TPELED-27HER-1

2”L-TPELED-48HER-1 (49 mm)

1/16” (1.8 mm)

Cord 127 mm (5 in.)

5/16” (8 mm)

3/8” (10 mm)

L-TPELED-65HER-1

Jumper Cord 127 mm 5 in.

5 mm 3/16 in.

1/16” (1.4 mm)

1” (25 mm)

1/16” (1.5 mm)

11/16” (16 mm)

1/4” (6.5 mm)

11/16 in. (17 mm)

Part #

7/64” 5/16”Cordmm (2.8 mm) Equiline 12VDC Tape LEDDC-ELT60-CON 3W (7 mm)127 (5 in.) 1/16” Transformer Mounting Block (1.5 mm)

7/64” (2.8 mm)

Power Cord 2 m (79 in.)

3/8 in. (10 mm)

Equiline 20' (6 m) Roll Tape LED 3000K

Equiline 20' (6 m) Roll Tape LED 6500K Jumper Cord

3/8” (10 mm)

(49 mm)

11/16” (16 mm)

Amp®5 mm 3/16 in. Connector

1-1/2 mm 1/16 in. d Connector 3 mm 1/8 in.

1/16 in. (1-1/2 mm)

L-TPELED-65SER-1

1-1/2 mm 1/16 in.

Jumper Cord

Description

1/16 in. 1-1/2 mm L-TPELED-27SER-1

DC-ELT60-CON Transformer

1/8 in. (3 mm)

3 mm 1/8 in.

Maximum continuous run is 16.4' (5 m). Maximum per power supply is 24' (7 m). Mounts with adhesive backing. Cuttable every 1-1/4" (31 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

3/8” (10 mm)

Power Cord 2 m (79 in.) Spool of LED FlexTape 6 m (20 ft.)

3/8”

Cord 127 mm (5 in.)

Mounting Block

L-FLXTPE-27EER-1

1-1/4” (31 mm)

(31 mm) Tape LED 1.5W (10 mm) 12VDC Equiline Cord 127 mm (5 in.)

Description

10 mm 3/8 in.

1-1/4”

Part #

(10 mm)

Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

All product dimensions and specifications are subject to change without prior notice. Required

Spool of LED FlexTape 6 m (20 ft.)

Mounting Block

1-800-227-1171 | trescolighting.com

Cord 5 in. (127 mm)

DC-ELT60-CON Transformer

COB FlexTape - 12V & 24V

8/3/20

SingleCOB Color Tape FlexTape - 12V & 24V

Jumper Cord 127 mm 5 in.

/2 mm 16 in.

10 mm 3/8 in.

8/3/20

3/8” (10 mm)

1/16” (1.5 mm) 3/8” (10 mm)

12VDC COB FlexTape® 4.4W 11/16” Spool of LED FlexTape 6 m (20 ft.)

3/8” (10 mm)

(18 mm)

+12V + 11/16”

+12V

(18 mm) -12V

-12V

+12V

3/8” (10 mm)

-12V +

+12V

-12V

+12V

-12V

+12V

-12V

3/8” (10 mm)

Power Cord 2 m (79 in.)

Cord 127 mm (5 in.) Cord 127 mm (5 in.)

DC-ELT60-CON Transformer

Mounting Block

1-1/2” (38 mm)

12VDC 120V

COMPO NENTS Power Supplies Controll ers Install Accessor ies

12VDC 4.4W/FT 2700K COB FlexTape® 13' (4 m) Roll

L-FLXCOB12-30RV-1

12VDC 4.4W/FT 3000K COB FlexTape® 13' (4 m) Roll

L-FLXCOB12-35RV-1

12VDC 4.4W/FT 3500K COB FlexTape® 13' (4 m) Roll

L-FLXCOB12-48RV-1

12VDC 4.4W/FT 4800K COB FlexTape® 13' (4 m) Roll

L-FLXCOB12-65RV-1

12VDC 4.4W/FT 6500K COB FlexTape® 13' (4 m) Roll

Description

3/8”

L-DC-ELT18-CON-1 (10 mm)

1/8 in.+ (3 mm)

24V DC

L-FLXCOB12-27RV-1

Part #

+24V

-24V

Description

1/16” Maximum continuous run is 13' (4 m). Maximum per power supply is 13' (4 m). Mounts with adhesive backing. (1.5 mm) 3/8” Cuttable every 11/16” (18 mm) . To be used on clean, smooth surfaces. Pressure must be applied for proper (10 mm) TM 1/16” tape adhesion. 3M (1.5 mm)

1/16 in. 1-1/2 mm

+24V

(38 mm) -24V

Optional 1/16” Part # (1.5 mm)

3/8” (10 mm)

+ 12VDC Power Supplies 1-1/2” +

-24V

Required

+24V

11/16L-DC-SLELT30-1 in. 1/16 in. (17 mm)(1-1/2 mm)

-24V

For details see Power Supplies on Page 142. 2” (49 mm)

141

1” (25 mm)

18W 12VDC Power Supply w/6 Snap Mounting Block* 3/8 in.

30W 12VDC Power Supply w/6 Snap Mounting (10 mm) Block*

L-DC-SLELT60-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DC-EQ30-1 3/8”

30W 12VDC Equiline Power Supply Snap Block* Spoolw/6 of LED FlexTape

L-DC-EQ60-1

60W 12VDC Equiline Power Supply w/6 Snap Block*

L-DCE30D-CON-1

30W 12VDC Hardwire Dimmable LED Power Supply†

L-DCE60D-CON-1

60W 12VDC Hardwire Dimmable LED Power Supply†

L-12DCH60X1-1

60W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

L-12DCH60X3-1

180W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

20 ft. (6m)

(10 mm)

1-800227-117 1 | trescol ighting .com

Jumper Cord

3/8” (10 mm)

12VDC Starter Cord for Single Color Tape Hexhead Connector 1/2” (13 mm)

1/4” (6 mm)

1/2” (13 mm)

Amp® Connector

Part #

Description

L-LED-TPEPKT-2M-1

2 m (79”) FlexTape® Straight Starter Lead

L-TPEPKT-2IN-1

50 mm (2”) FlexTape® Straight Starter Power LeadCord

2 m (79 in.)

Cord 5 in. (127 mm)

Starter Cord 79” (2 m)

Mounting Block

Cord 5 in. (127 mm)

DC-ELT60-CON Transformer

12VDC Tee Starter Cord for Single Color Tape Part #

Description

L-LED-TPEPKT-2M-TEE-1

2 m (79”) FlexTape® Tee Starter Lead

79” (2 m)

1-1/4” (32 mm)

1/2” (13 mm)

20’ (6 m) max. per side

1/4 in. (6 mm)

20’ (6 m) max. per side

max. per side

1-800-227-1171 | trescolighting.com

1-1/2” (38 mm)

Single Color Tape

All product dimensions and specifications are subject to change without prior notice.

25 mm 1”

1/2” (13 mm)

12/24VDC Tee Connector for Single Color Tape

Description

L-LED-TPELNK-TEE-1

Tee Link Connector

1/4” (6 mm)

1/2”. (13 mm)

1/4” (6 mm)

Required Optional

Part # 1-1/2” (38 mm)

1” (25 mm)

1/4” (6 mm)

25 mm 1”

1/2” (13 mm)

12/24VDC Right Angle Connector for Single Color Tape

Part #

Description

L-LED-TPELNK-CON90-1

90° Link Connector

1/4” (6 mm)

1” (25 mm)

1/4” (6 mm) 1/2”.

1/4” (6 mm)

(13 mm)

Jumper Cord

12/24VDC Link Cord for Single Color Tape

Part #

Description

1/4” L-LED-TPELNK-5-1 (6 mm)

5 cm (2”) FlexTape® Link Cord

3/8 in. L-LED-TPELNK-15-1 (10 mm)

n. mm)

Positive and negative contacts on FlexTape® and FlexConnects should match-up to maintain proper polarity.

15 cm (6”) FlexTape® Link Cord

L-LED-TPELNK-25-1

25 cm (10”) FlexTape® Link Cord

L-LED-TPELNK-60-1

60 cm (24”) FlexTape® Link Cord

L-LED-TPELNK-120-1

120 cm (48”) FlexTape® Link Cord

L-LED-TPELNK-180-1

180 cm (72”) FlexTape® Link Cord

Spool of LED FlexTape 20 ft. (6m)

12VDC Back-to-Back Connector for Single Color FlexTape®

Part #

Description

L-TPELNK-BTB-1

Back-to-Back Connector

To be used with non-COB single color tapes. 5/8” (15.4 mm) 9/16” (14.5 mm)

12/24VDC Back-to-Back Connector for COB 1/4” (6 mm) 1/2” (13 mm)

1/2” (13 mm)

Part #

Description

L-XSBTB-1

10 mm, 2 Position Back-to-Back Connector, Clear

Power Cord 2 m (79 in.) Cord 5 in. (127 mm)

Mounting Block

Cord 5 in. (127 mm)

DC-ELT60-CON Transformer

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

COB FlexTape - 12V & 24V

8/3/20

3/8” (10 mm)

Single Color Tape Jumper Cord 127 mm 5 in.

1-1/2 mm 1/16 in.

Required

+12V

-12V

Optional

3/8” (10 mm) +

+12V

COB FlexTapeSpool - 12V 24V of LED& FlexTape

mm in.

6 m (20 ft.) -12V

+12V 8/3/20

-12V

24VDC COB FlexTape® 5.5W

3/8” (10 mm) 3/8” (10 mm)

11/16” (18 mm)

-12V

+12V

(38 mm) -12V

1/16” (1.5 mm)

-12V

3/8” (10 mm)

+24V

-24V

+12V

+24V

Power Cord -24V 2 m (79 in.)

3/8” (10 mm)

Cord 127 mm (5 in.) Cord 127 mm (5 in.)

DC-ELT60-CON Transformer

1-1/2” (38 mm) +24V

+24V

24VDC - Power Supplies

24V

12VDC 24V DC 120V

COMPO NENTS Power Supplies

1/16” (1.5 mm)

Part #

Description

L-FLXCOB24-27RU-1

24VDC 5.5W/FT 2700K COB FlexTape® 16.4' (5 m) Roll

L-FLXCOB24-30RU-1

24VDC 5.5W/FT 3000K COB FlexTape® 16.4' (5 m) Roll

L-FLXCOB24-35RU-1

24VDC 5.5W/FT 3500K COB FlexTape® 16.4' (5 m) Roll

L-FLXCOB24-48RU-1

24VDC 5.5W/FT 4800K COB FlexTape® 16.4' (5 m) Roll

L-FLXCOB24-65RU-1

24VDC 5.5W/FT 6500K COB FlexTape® 16.4' (5 m) Roll

Maximum continuous run is 16.4' (5 m). Maximum per power supply is 16.4' (5 m). Mounts with adhesive backing. Cuttable every 1-1/2” (38 mm) . To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

3/8” (10 mm)

Controll ers Install Accessor ies

For details see Power Supplies on Page 142.

141

24V Starter Cord 79” (2m) L-24B2SPKT-2M

Description

L-24DCELT96-1

96W 24VDC Power Supply w/ 5 Barrel Out - White†

L-24DCELT48-BL-1

48W 24VDC Power Supply w/ 5 Barrel Out - Black†

L-24DCELT15WP-1

15W 24VDC Wall Mount Power Supply w/ Snap Connector*†

L-24DCH96X1-1

96W 24VDC Dimmable Hardwire Power Supply*§

L-24DCH96X3-1

288W 24VDC Dimmable Hardwire Power Supply*§

L-1BRL5-1

Extra 5 Output Barrel Splice

082120

24VDC Starter Cord for COB 1-1/2” (38 mm)

Part #

*Does not come with 5 Output Barrel Splice †Dimmable on trailing edge (24VDC side) § Dimmable by LED line voltage (120V) wall dimmers

1-800227-117 1 | trescol ighting .com

Part #

Description

L-24B2SPKT-2M-1

2 m (79") 24VDC FlexTape® Barrel/2 Screw Trml Starter Lead, White

79” (2 m) 2” (50 mm)

7/16” (11 mm) 1/4” (6 mm) 1/2” (13 mm)

1/16” (1.5 mm)

3/8” (10 mm)

+12V1-1/2”+

Mounting Block

All product dimensions and specifications are subject to change without prior notice.

10 mm 3/8 in.

11/16” (18 mm) +

1/16” (1.5 mm)

1/2” (13 mm)

24VDC Tee Starter Cord for COB 1-1/2” (38 mm)

79” (2 m) 2” (50 mm)

7/16” (11 mm)

1-1/4” (32 mm)

Part #

Description

L-24B2SPKT-2M-TEE-1

2 m (79") 24VDC FlexTape® Barrel/2 Screw Trml Tee Starter Lead, White

1/2” (13 mm)

24VDC Extension Lead 39”, 79”, 118” (1 m, 2 m, 3 m )

1-1/2” (38 mm)

Part #

Description

L-24BBEXT-1M-1

1 m (39") 24VDC ML/FML Barrel Extension, White

L-24BBEXT-2M-1

2 m (79") 24VDC ML/FML Barrel Extension, White

L-24BBEXT-3M-1

3 m (119") 24VDC ML/FML Barrel Extension, White

7/16” (11 mm)

24VDC COB FLEXTAPE USES STANDARD FLEXTAPE LINK CORDS, TEE CONNECTOR AND 90-DEGREE CONNECTOR. SEE PAGE 89 COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

Tunable

TAPE

1-800-227-1171 | trescolighting.com

12VDC 24V DC

White Tunable

12VDC

3W/ft. (9.8W/m)

White Tunable FlexTape®

345 Lumens per ft. (1132 per meter)

115°

Changing your light source’s color temperature is easy with Tresco® White Tunable CCT FlexTape® lighting solution. Select between warmer lighting that highlights natural wood grains and earth tones or cool lighting to highlight whites; perfect for cabinet, task or accent lighting and store fixtures. The low profile and adhesive 3MTM backing give this LED lighting solution the versatility to install in a multitude of places. Eliminate the guesswork and get the LED that pairs perfectly with your general lighting and overall design.

Features: 115° beam angle High output (345 lumens per ft.) White tunable from 2700K-6500K Sold in 16.4’ (5 m) roll 2700K

Cuttable every 1” (25 mm) No soldering required – simple FlexConnect connectors (sold separately) Precision tunable remote controls (sold separately)

Cuttable every 1” (25 mm)

Typical Applications: 3500K

Under Cabinet Interior Cabinets Accent Lighting Displays Task Lighting

6500K Eliminate the guesswork and get the LED that pairs perfectly with your general lighting and overall design.

Store fixtures Toe kick Soffit CCT FlexTape - 12V & 24V

8/3/20

CCT FlexTape - 12V & 24V

8/3/20

Backlighting

19/64”

(7.5 mm) 19/64” (7.5 mm)

5 YEAR

1/16” (1.5 mm) 1/16” (1.5 mm)

COMMERCIAL GRADE AR

7/64” (2.8 mm) 7/64” (2.8 mm)

Dimensions: No soldering required – simple FlexConnect connectors (sold separately)

1” (25 mm) 1” (25 mm)

7/64” (2.8 mm) 7/64” (2.8 mm)

Strong 300 LSE 3M

adhesive backing

19/64” (7.5 mm) 19/64” (7.5 mm)

1/16” (1.5 mm) 1/16” (1.5 mm)

White Tunable FlexTape® can be used as a DIY option for 2” recessed Infinex. For other profiles, must be flush and (50 mm) 3/8” custom ordered. 2” +24

3/8” (10 mm) 3/8” (10 mm)

(50 mm)

+24

W+24

W-

1-800-227-1171 | trescolighting.com

(10 mm) 3/8” (10 mm)

RA N T

White Tunable FlexTape® Typical Setup:

12VDC White Tunable FlexTape®

Starter Cord

Tunable RGB-CCT Parent Receiver (See details on page 156)

Mounting Block

(Included with power supply)

Power Supply

(18W Power Supply shown)

RGB CCT Remotes

(See details on page 157) Required Optional

Accessories:

Starter Cord

Power Supplies RGB CCT Parent see power supply Receiver section

RGB CCT Remotes 6 Output Adaptor RGB CCT Child Receiver L-4P6O-1

L-TPEPKT-2M-CCT-1 See page 157 L-TPEPKT-2IN-CCT-1

L-RGBCCT1-PREC-1

L-RGBCCT1-CREC-1

Back-to-Back Connector

L-TPE-BTB-CCT-1

Specifications:

Link Cord

L-TPELNK5-CCT-1 L-TPELNK15-CCT-1 L-TPELNK25-CCT-1 L-TPELNK60-CCT-1 L-TPELNK120-CCT-1 L-TPELNK180-CCT-1

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per Power Supply 60W

Max Continuous Run

Mounting

Warranty

3W/ft. (9.8W/m)

345 per ft. (1132 per m)

115

12VDC

50,000 Hours

20' (6 m)

16.4' (5 m)

Surface

5 Year

Photometric Data

DIY Wire & Terminal Block L-CCTWIRE25-1 L-BS4PBL-1

Beam Angle

115°

Color Temperature

Height

Light Output

1ft

114Fc

3ft

12.7Fc

(136.7lx)

(2.9 m L x 2.7 m W)

6ft

3.17Fc

19.4ft L x 18.1ft W

(.3 m) (.9 m) (1.8 m)

(1227lx)

(34.1lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

3.2ft L x 3ft W

(.97 m L x .91 m W)

9.7ft L x 9ft W

(5.9 m L x 5.5 m W)

L-FLXTPE-12CCT-1 Tested at 4600K

2700K

3000K

Warm (2700K)

4500K

5500K

6500K

Daylight (6500K)

See page 102 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

White Tunable

24VDC

3W/ft. (9.8W/m)

White Tunable FlexTape®

345 Lumens

115°

per ft. (1132 per meter)

Features: 115° beam angle High output (345 lumens per ft.) White tunable from 2700K-6500K Sold in 16.4’ (5 m) roll 2700K

Cuttable every 2” (50 mm) No soldering required – simple FlexConnect connectors (sold separately) Precision tunable remote controls (sold separately) Typical Applications:

3500K

Cuttable every 2” (50 mm)

Under Cabinet Interior Cabinets

CCT FlexTape - 12V & 24V

Accent Lighting

8/3/20

19/64”

7/64”

Displays (2.8 mm)

(7.5 mm)

Task Lighting 6500K Eliminate the guesswork and get the LED that pairs perfectly with your general lighting and overall design.

1/16” (1.5 mm)

Store fixtures 1” Toe(25kick mm)

3/8” (10 mm)

Soffit

CCT FlexTape - 12V & 24V

8/3/20

Backlighting

19/64”

7/64” (2.8 mm)

(7.5 mm) 19/64” (7.5 mm)

Dimensions: 1” 2” (50 mm)

Strong 300 LSE 3M

adhesive backing

3/8” (10 mm)

+24

W-

7/64” (2.8 mm)

1/16” (1.5 mm) 3/8” (10 mm)

(25 mm)

No soldering required – simple FlexConnect connectors (sold separately)

COMMERCIAL GRADE W

7/64” (2.8 mm)

5 YEAR

1/16” (1.5 mm)

19/64” (7.5 mm)

1/16” (1.5 mm)

White Tunable FlexTape® can be used as a DIY option for 2” (50 mm) flush and recessed Infinex. For other profiles, 3/8” must be (10 mm) custom ordered. +24

+24

W-

1-800-227-1171 | trescolighting.com

RA N T

White Tunable FlexTape® Typical Setup:

24VDC White Tunable FlexTape® Starter Cord

Tunable RGB-CCT Parent Receiver (See details on page 156)

Power Supply

(96W 24VDC Power Supply w/ 5 Barrel Out shown)

RGB CCT Remotes

(See details on page 157) Required Optional

Accessories:

Starter Cord

RGB CCT Parent Receiver

Power Supplies see power supply section

RGB CCT Remotes 6 Output Adaptor RGB CCT Child Receiver L-4P6O-1

L-TPEPKT-2M-CCT-1 See page 157 L-TPEPKT-2IN-CCT-1

L-RGBCCT1-PREC-1

L-RGBCCT1-CREC-1

Back-to-Back Connector

L-TPE-BTB-CCT-1

Specifications:

Link Cord

L-TPELNK5-CCT-1 L-TPELNK15-CCT-1 L-TPELNK25-CCT-1 L-TPELNK60-CCT-1 L-TPELNK120-CCT-1 L-TPELNK180-CCT-1

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per Power Supply 96W

Max Continuous Run

Mounting

Warranty

3W/ft. (9.8W/m)

345 per ft. (1132 per m)

115

24VDC

50,000 Hours

30' (9 m)

16.4' (5 m)

Surface

5 Year

Photometric Data

DIY Wire & Terminal Block L-CCTWIRE25-1 L-BS4PBL-1

Beam Angle

115°

Color Temperature

Height

Light Output

1ft

114Fc

3ft

12.7Fc

(136.7lx)

(2.9 m L x 2.7 m W)

6ft

3.17Fc

19.4ft L x 18.1ft W

(.3 m) (.9 m) (1.8 m)

(1227lx)

(34.1lx)

Beam Area

Warm White

Warm to Neutral

Cool White

Daylight

3.2ft L x 3ft W

(.97 m L x .91 m W)

9.7ft L x 9ft W

(5.9 m L x 5.5 m W)

L-FLXTPE-24CCT-1 Tested at 4600K

2700K

3000K

Warm (2700K)

4500K

5500K

6500K

Daylight (6500K)

See page 102 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

RGB Tunable

RGB Tunable FlexTape®

12VDC

4.4W/ft.

Red

Green

121

per ft. (397 per meter)

per ft. (157 per meter)

(14.4W/m)

Blue

Lumens

35Lumens per ft. (115 per meter)

120°

Tresco®’s RGB Balance FlexTape® goes the distance, with 16 million color variations and On-Board Constant Current Regulators creating consistent dramatic lighting is a reality. Created for high-end projects including residential, hospitality and commercial.

BALANCE

Why Balance All tape lighting has inherent voltage drop. This voltage drop can cause color shift in longer runs of RGB. The On-Board Constant Current Regulators prevent this from happening resulting in balanced color from start to finish.

Features: 120° beam angle 4.4W/ft. Sold in 13’ (4 m) roll Cuttable every 1-5/8” (42 mm) No soldering required – simple FlexConnect connectors (sold separately) Precision tunable remote controls (sold separately) Typical Applications: Under Cabinet Interior Cabinets Accent Lighting Displays Task Lighting Cuttable every 1-5/8” (42 mm)

Store fixtures Toe kick 16 million color combinations

Soffit RGB FlexTape w/out IC - 24V Backlighting

8/4/20

5 YEAR

COMMERCIAL GRADE W

RGB FlexTape w/ IC - 12V & 24V

Dimensions:

17/32” (13.5 mm)

3/16” (5 mm)

15/32” (12 mm)

3/16” (5 mm)

No soldering required – simple FlexConnect connectors (sold separately)

1-5/8” (42 mm)

3/8” (10 mm)

+12

Strong 300 LSE 3MTM adhesive backing

3/32” (2.3 mm)

2-13/16” (71 mm)

+12

8/4/20

17/32” can be used as a DIY option for 3/16”Tunable FlexTape® RGB (13.5 mm) (5 mm) flush and recessed Infinex. For other 3/32” profiles, must be (2.3 mm) custom ordered.

1-800-227-1171 | trescolighting.com

3-1/4” (83 mm)

3/8”

RA N T

RGB Tunable FlexTape® Typical Setup:

12VDC RGB Balance Tunable FlexTape® Starter Cord

Tunable RGB-CCT Parent Receiver (See details on page 156)

Mounting Block

(Included with power supply)

Power Supply

(18W Power Supply shown)

RGB CCT Remotes

Required

(See details on page 157)

Optional

Accessories:

Power Supplies RGB CCT Parent see power supply Receiver section

L-RGBCCT1-PREC-1

Starter Cord

RGB CCT Remotes 6 Output Adaptor RGB CCT Child L-4P6O-1 Receiver

L-TPEPKT-2M-RGB-1 See page 157 L-TPEPKT-2IN-RGB-1

Back-to-Back Connector

L-RGBCCT1-CREC-1

L-TPE-BTB-RGB-1

Link Cord

L-TPELNK5-RGB-1 L-TPELNK15-RGB-1 L-TPELNK25-RGB-1 L-TPELNK60-RGB-1 L-TPELNK120-RGB-1 L-TPELNK180-RGB-1

DIY Wire & Terminal Block L-RGBWIRE25-1 L-BS4PBL-1

Specifications:

Wattage

Lumens

Input Voltage

Diode Life

Max Per Power Supply 60W

Max Continuous Run

Mounting

Warranty

4.4W/ft. (14.4W/m)

Red: 48 per ft. (157 per m) Green: 121 per ft. (397 per m) Blue: 35 per ft. (115 per m)

12VDC

50,000 Hours

13' (4 m)

Surface

5 Year

Blue 460 mn

400

450

Green 520 nm

500

Beam Angle

120°

Red 630 nm

550 600 Wavelength (nm)

650

700

750

Wavelengths are averages.

See page 103 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

RGB Tunable

RGB Tunable FlexTape®

24V DC

Red

4.4W/ft.

Green

Lumens

per ft. (167 per meter)

(14.4W/m)

117

Blue

Lumens

per ft. (384 per meter)

41Lumens

per ft. (135 per meter)

120°

BALANCE

Features: 120° beam angle 4.4W/ft. Sold in 16.4’ (5 m) roll Cuttable every 3-1/4” (83 mm) No soldering required – simple FlexConnect connectors (sold separately) Precision tunable remote controls (sold separately) Typical Applications: Under Cabinet Interior Cabinets RGB FlexTape w/ IC - 12V & 24V Accent Lighting

8/4/20

17/32” (13.5 mm)

3/16”

Displays (5 mm)

3/32” (2.3 mm)

Task Lighting Cuttable every 3-1/4” (83 mm)

Store fixtures Toe kick

16 million color combinations

1-5/8”

Soffit (42 mm)

3/8” (10 mm)

Backlighting +12

+12

5 YEAR

COMMERCIAL GRADE W

Dimensions: 3/16” w/ IC - 12V & 24V17/32” RGB FlexTape 8/4/20 (13.5 mm) (5 mm) 17/32” (13.5 mm)

3/16” (5 mm)

No soldering required – simple FlexConnect connectors (sold separately)

1-5/8” (42 mm)

3-1/4” (83 mm)

+24 +12 G G R B

Strong 300 LSE 3M

adhesive backing

3/32” (2.3 mm)

3/8”

3/8” (10 mm) (10 mm)

+12 G

RGB Tunable FlexTape® can be used as a DIY option for 17/32” 3/16” and recessed flush Infinex. For other profiles, must be (13.5 mm) (5 mm) custom ordered. 3/32” (2.3 mm)

3/32” (2.3 mm)

1-800-227-1171 | trescolighting.com 3-1/4”

RA N T

RGB Tunable FlexTape® Typical Setup:

24VDC Balance RGB FlexTape® Starter Cord

Tunable RGB-CCT Parent Receiver (See details on page 156)

Power Supply

(96W 24VDC Power Supply w/ 5 Barrel Out shown) Required

RGB CCT Remotes

(See details on page 157)

Optional

Accessories:

Power Supplies see power supply section

RGB CCT Parent Receiver

L-RGBCCT1-PREC-1

Starter Cord

RGB CCT Remotes 6 Output Adaptor RGB CCT Child L-4P6O-1 Receiver

L-TPEPKT-2M-RGB-1 See page 157 L-TPEPKT-2IN-RGB-1

Back-to-Back Connector

L-RGBCCT1-CREC-1

L-TPE-BTB-RGB-1

Link Cord

L-TPELNK5-RGB-1 L-TPELNK15-RGB-1 L-TPELNK25-RGB-1 L-TPELNK60-RGB-1 L-TPELNK120-RGB-1 L-TPELNK180-RGB-1

DIY Wire & Terminal Block L-RGBWIRE25-1 L-BS4PBL-1

Specifications:

Wattage

Lumens

Input Voltage

Diode Life

Max Per Power Supply 96W

Max Continuous Run

Mounting

Warranty

Beam Angle

4.4W/ft. (14.4W/m)

Red: 51 per ft. (167 per m) Green: 117 per ft. (384 per m) Blue: 41 per ft. (135 per m)

24VDC

50,000 Hours

21' (6.4 m)

16.4' (5 m)

Surface

5 Year

120°

Blue 460 mn

400

450

Green 520 nm

500

Red 630 nm

550 600 Wavelength (nm)

650

700

750

Wavelengths are averages.

See page 103 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

RGB Tunable

RGB Tunable FlexTape®

24V DC

4.4W/ft. (14.4W/m)

Red

Green

Lumens

per ft. (167 per meter)

117

Blue

Lumens

per ft. (384 per meter)

41Lumens

per ft. (135 per meter)

120°

Creating dramatic lighting with 16 million colors is a reality with Tresco Lightings RGB Standard color-changing FlexTape®. Created and priced for everyday projects.

STANDARD

Features: 120° beam angle 4.4W/ft. Sold in 16.4’ (5 m) roll Cuttable every 2-13/16” (71 mm) No soldering required – simple FlexConnect connectors (sold separately) Precision tunable remote controls (sold separately) Typical Applications: Under Cabinet Interior Cabinets Accent Lighting Displays Task Lighting Store fixtures

Cuttable every 2-13/16” (71 mm)

Toe kick 16 million color combinations

Soffit RGB FlexTape w/out IC - 24V

8/4/20

RGB FlexTape w/out IC - 24V

8/4/20

Backlighting

5 YEAR

COMMERCIAL GRADE W

Dimensions: 15/32” (12 mm) 15/32” (12 mm)

3/16” (5 mm) 3/16” (5 mm)

No soldering required – simple FlexConnect connectors (sold separately)

2-13/16” (71 mm) 2-13/16” (71 mm) G

3/32” (2.3 mm) 3/32” (2.3 mm)

G B

Strong 300 LSE 3M

100

adhesive backing

+ G

R G

3/8” (10 mm) 3/8” (10 mm)

RGB Tunable FlexTape® can be used as a DIY option for flush and recessed Infinex. For other profiles, must be custom ordered.

1-800-227-1171 | trescolighting.com

RA N T

RGB Tunable FlexTape® Typical Setup:

24VDC Standard RGB FlexTape® Starter Cord

Tunable RGB-CCT Parent Receiver (See details on page 156)

Power Supply

(96W 24VDC Power Supply w/ 5 Barrel Out shown)

RGB CCT Remotes

(See details on page 157) Required Optional

Accessories:

Power Supplies see power supply section

RGB CCT Parent Receiver

L-RGBCCT1-PREC-1

Starter Cord

RGB CCT Remotes 6 Output Adaptor RGB CCT Child L-4P6O-1 Receiver

L-TPEPKT-2M-RGB-1 See page 157 L-TPEPKT-2IN-RGB-1

Back-to-Back Connector

L-RGBCCT1-CREC-1

L-TPE-BTB-RGB-1

Link Cord

L-TPELNK5-RGB-1 L-TPELNK15-RGB-1 L-TPELNK25-RGB-1 L-TPELNK60-RGB-1 L-TPELNK120-RGB-1 L-TPELNK180-RGB-1

DIY Wire & Terminal Block L-RGBWIRE25-1 L-BS4PBL-1

Specifications: Wattage

Lumens

Input Voltage

Diode Life

Max Per Power Supply 96W

Max Continuous Run

Mounting

Warranty

Beam Angle

4.4W/ft. (14.4W/m)

Red: 51 per ft. (167 per m) Green: 117 per ft. (384 per m) Blue: 41 per ft. (135 per m)

24VDC

50,000 Hours

21' (6.4 m)

16.4' (5 m)

Surface

5 Year

120°

Blue 460 mn

400

450

Green 520 nm

500

Red 630 nm

550 600 Wavelength (nm)

650

700

750

Wavelengths are averages.

See page 103 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

101

19/64”

7/64” (2.8 mm)

(7.5 mm)

CCT FlexTape - 12V & 24V

Tunable Tape

Jumper Cord 127 mm 5 in.

mm n.

10 mm 3/8 in.

8/3/20

1/16” (1.5 mm)

All product dimensions and specifications are subject to change without prior notice.

19/64”

7/64” (2.81”mm)

(7.5 mm)

(25 mm)

3/8” (10 mm)

1/16” (1.5 mm)

Required

12/24VDC White Tunable FlexTape® Spool of LED FlexTape 6 m (20 ft.)

12VDC:

1”

(25 mm) 7/64” (2.8 mm)

3/8” (10 mm) 1/16”

19/64” (7.5 mm)

(1.5 mm)

7/64” (2.8 mm) W-

3/8” (10 mm)

19/64” W(7.5 mm)

+24

L-FLXTPE-12CCT-1

12VDC 3W/FT CCT FlexTape® 16.4' (5 m) Roll

L-FLXTPE-24CCT-1

24VDC 3W/FT CCT FlexTape® 16.4' (5 m) Roll

+24

W-

Description

Maximum continuous run is 16.4' (5 m). Maximum per power supply is 12VDC: 20' (6 m), 24VDC: 30’ (5 m). Mounts with adhesive backing. 12VDC is cuttable every 1" (25 mm), 24VDC is cuttable every 2” (50 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

24VDC: 2” (50 mm)

Optional

Part #

1/16” (1.5 mm)

W-

Power Cord 2 m (79 in.)

Cord 127 mm (5 in.) Cord 127 mm (5 in.)

DC-ELT60-CON Transformer

CCT Starter Cord

12/24VDC Power 2”Supplies

Mounting Block

L-TPEPKT-2M-CCT-1

For details see Power Supplies on Page 142.

081520

(50 mm)

12VDC

3/8” (10 mm) Power supplies for 12VDC work with 12VDC CCT Flextape®, Power supplies for 24VDC work with 24VDC CCT Flextape®

24V DC 120V

COMPON ENTS Power Suppl ies Contro llers Install Accessories

+24

W-

+24 W1-800-227 -1171 | trescoligh ting.com

141

12/24VDC CCT Starter Cord 3/16” (5 mm) 1/2” (12 mm) 7/16” (11 mm) 9/32” (7 mm)

79” (2 m) 2” (50 mm)

Part #

Description

L-TPEPKT-2M-CCT-1

2 m (79”) FlexTape CCT Starter Lead

L-TPEPKT-2IN-CCT-1

50 mm (2”) FlexTape CCT Starter Lead

5/8" (16 mm) hole required. Maximum linear run of White Tunable FlexTape® LED from one starter cord is 16.4' (5 m).

1-13/16 in. (46 mm)

5/8 in. (16 mm)

12/24VDC RGB-CCT Receivers 5-3/4 in. (146 mm)

1-13/16 in. (46 mm)

Parent

Child

5/8 in. (16 mm).

1-13/16 in. (46 mm) 5-3/4 in. (146 mm)

LED Receiver

Part #

Description

L-RGBCCT1-PREC-1

12/24VDC RGBCCT Parent Controller/Receiver

L-RGBCCT1-CREC-1*

12/24VDC RGBCCT Child Controller/Receiver

*Child Receiver is optional 6 output adaptor sold separately

5/8 in. (16 mm)

for RGB & CCT

FreeDim Dimmer 5-3/4 in. FreeDim WallWall Dimmer (146 mm)

1-13/16 in. (46 mm)

Housing Housing

12/24VDC RGB-CCT Remotes for RGB & CCT LED Controller

5/8 in. Front (16 mm).

ote Control

Front

5-3/4 in. (146 mm)

5-17/32” (140.5 mm)

3000K

3500K

2-7/16” (61 mm) 2-7/16” (61 mm)

4” 4” (103 mm) (103 mm)

Part #

Description

L-RGBCCT-RMT-1

RGBCCT Wireless Remote

L-WLD-CCT-WH-1

CCT FREEDiM Deco Wall Dimmer White

L-WLD-RGB-WH-1

RGB FREEDiM Deco Wall Dimmer White

5000K

CCT Extension Cord

1-23/32” (44 mm)

9/16” (13 mm)

1” 1”(27 mm) (27 mm)

L-CCTEXT-x

081520

9/16” (13 mm)

9/16” (13 mm) 9/16” (13 mm)

1-5/16” (33 mm) 1-5/16” (33 mm)

12/24VDC Starter CCT Extension Leads

24” (60 cm) 48” (120 cm)

CCT BTB connector

Part #

Description

L-CCTEXT-60-1

60 cm (24”) CCT FlexTape Starter Extension Lead

L-CCTEXT-120-1

120 cm (48”) CCT FlexTape Starter Extension Lead

-5/13/20

12/24VDC CCT Back-to-Back Connector

3/16” (5 mm)

Part #

Description

L-TPE-BTB-CCT-1

CCT FlexTape® Back-to-Back Connector

1/2” (12 mm)

102

1-800-227-1171 | trescolighting.com

Tunable Tape

All product dimensions and specifications are subject to change without prior notice. Required Optional

12/24VDC 6 Output Adaptor 5/16” (8 mm) 5/16” (8 mm)

CCT Link Cord

L-TPELNKx-CCT-1

9/32” (7 mm)

081520

7/16” (11 mm)

12/24VDC CCT Link Cords

3/16” (5 mm) 1/2” (12 mm)

2” (5 cm) 6” (15 cm) 10” (25 cm) 24” (60 cm) 48” (120 cm) 72” (180 cm)

25’ (7.6 m) 2-1/8” RGB FlexTape w/(54ICmm) - 12V & 24V 1-11/15” (44 mm) 1-1/15” (27 mm) 3/16” 11-32” (9 mm)

17/32” (13.5 mm)

11/16” (17.5 mm)

(5 mm)

17 mm 11/16 in.

1-1/2 mm 1/16 in.

5 mm 3/16 in.

Jumper Cord 127 1” mm (25 mm) 5 9/16” in. (15 mm)

11/16” (17.5 mm)

RGB FlexTape w/ IC - 12V & 24V

1-1/2 mm 1/16 in.

mm /8 in.

8/4/20

10 mm 3/8 in. +12

+12

Balance (12VDC): RGB FlexTape w/out IC - 24V

Spool of LED FlexTape 6 m (20 ft.)

1-5/8” (42 mm) 3/16” (5 mm)

+12 R B

8/4/20

3/8” (10 mm) 3/32” (2.3 mm)

+12 G R B

Balance (24VDC):

17/32” 3-1/4” (83 mm) (13.5 mm) 15/32” (12 mm)

3/16” (5 mm) 3/16” (5 mm)

3/8” 3/32” (10 mm) (2.3 mm) 3/32” (2.3 mm)

G R B

3-1/4”

Power Cord

2 m (79 in.) (83 mm) Standard (24VDC):

Amp® Connector Cord 127 mm (5 in.) Cord 127 mm (5 in.)

Mounting Block

3/8” (10 mm) 3/8” (10 mm)

2-13/16” (71 mm)

+24 G R B

DC-ELT60-CON Transformer

Description

L-TPELNK5-CCT-1

5 cm (2”) CCT FlexTape® Link Cord

L-TPELNK15-CCT-1

15 cm (6”) CCT FlexTape® Link Cord

L-TPELNK25-CCT-1

25 cm (10”) CCT FlexTape® Link Cord

L-TPELNK60-CCT-1

50 cm (24”) CCT FlexTape® Link Cord

L-TPELNK120-CCT-1

120 cm (48”) CCT FlexTape® Link Cord

L-TPELNK180-CCT-1

180 cm (72”) CCT FlexTape® Link Cord

Description

L-CCTWIRE25-1

25' (7.6 m) 20AWG CCT Wire Roll

L-BS4PBL-1

12/24VDC Barrier Splice 4 Position Black

Part #

Description

L-FLXTPE-12RGB-1

12VDC 4.4W/FT RGB FlexTape W/IC 13’ (4 m) Roll

L-FLXTPE-24RGB-1

24VDC 4.4W/FT RGB FlexTape W/IC 16.4’ (5 m) Roll

L-TPELED-24RGB-1

24VDC 4.4W/FT RGB Tape LED 16.4’ (5 m) Roll

Maximum continuous run is 13' (4 m) for 12VDC and 16.4’ (5 m) for 24VDC. Maximum per power supply is 12VDC: 13' (4 m), 24VDC: 16.4’ (5 m). Mounts with adhesive backing. Standard 24VDC is cuttable every 2-13/16” (71 mm), RGB Balance 12VDC is cuttable every 1-5/8” (42 mm), RGB Balance 24VDC is cuttable every 3-1/4” (83 mm). To be used on clean, smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.

For details see Power Supplies on Page 142.

12VDC 24V DC 120V

COMPON ENTS Power Suppl

Power supplies for 12VDC work with 12VDC RGB Flextape®, Power supplies for 24VDC work with 24VDC RGB Flextape®

ies Contro llers Install Accessories

L-TPEPKT-2M-RGB-1

Part #

12/24VDC Power Supplies RGB Starter Cord

Part #

3/8” 3/32” (10 mm) (2.3 mm)

17/32” (13.5 mm)

1” (25 mm) 9/16” (15 mm)

+24

4 Position, 6 Output Adaptor - White

8/4/20

17/32” (13.5 mm)

3/16” 1-5/8” (5 mm) (42 mm)

12/24VDC RGB Tunable FlexTape®

10 mm 3/8 in.

L-4P6O-1

3/32” (2.3 mm)

7/8” (22 mm)

2-1/8” (54 mm) 1-11/15” (44 mm) 1-1/15” (27 mm) 11-32” (9 mm)

L-BS4PBL-1

Description

L-CCTWIRE25-1

12/24VDC CCT DIY

L-BS4PBL-1

Part #

081220

1-800-227 -1171 | trescoligh ting.com

141

12/24VDC RGB Starter Cord

3/16” (5 mm) 1/2” (12 mm) 7/16” (11 mm) 9/32” (7 mm)

79” (2 m) 2” (50 mm)

Part #

Description

L-TPEPKT-2IN-RGB-1

50 mm (2”) FlexTape RGB Starter Lead

L-TPEPKT-2M-RGB-1

2 m (79”) FlexTape RGB Starter Lead

5/8" (16 mm) hole required. Maximum linear run of RGB Tunable FlexTape® LED from one starter cord is 16.4' (5 m).

1-800-227-1171 | trescolighting.com

103

Tunable Tape

All product dimensions and specifications are subject to change without prior notice.

1-13/16 in. (46 mm)

Required Optional

5/8 in. (16 mm)

12/24VDC RGB-CCT Receivers 5-3/4 in. (146 mm)

1-13/16 in. (46 mm)

Parent 5/8 in. (16 mm). 5-3/4 in. (146 mm)

LED Receiver

1-13/16 in. (46 mm)

Child

Description

L-RGBCCT1-PREC-1

12/24VDC RGBCCT Parent Controller/Receiver

L-RGBCCT1-CREC-1*

12/24VDC RGBCCT Child Controller/Receiver

*Child Receiver is optional 6 output adaptor sold separately.

5/8 in. (16 mm)

for RGB & CCT

Part #

FreeDimWall WallDimmer Dimmer 5-3/4 in. FreeDim (146 mm)

1-13/16 in. (46 mm)

Housing Housing

12/24VDC RGB-CCT Remotes

LED Controller for RGB & CCT

5/8 in. (16 mm). Front

CT Remote Control

Front

-RMT

5-3/4 in. (146 mm)

5-17/32” (140.5 mm)

3500K

3000K

4” 4”mm) (103 (103 mm)

2-7/16” 2-7/16” (61 mm) (61 mm)

RGB Extension Cord

5000K

L-RGBEXT-x

081320

1” (27 1” mm) (27 mm)

1-23/32” (44 mm)

9/16” (13 mm) 9/16” (13 mm)

Description

L-RGBCCT-RMT-1

RGBCCT Wireless Remote

L-WLD-CCT-WH-1

CCT FREEDiM Deco Wall Dimmer White

L-WLD-RGB-WH-1

RGB FREEDiM Deco Wall Dimmer White

1-5/16” (33 mm) ” 1-5/16 (33 mm)

12/24VDC RGB Starter Extension Leads 24” (60 cm) 48” (120 cm)

RGB BTB connector

Part #

Description

L-RGBEXT-60-1

60 cm (24”) RGB FlexTape Starter Extension Lead

L-RGBEXT-120-1

120 cm (48”) RGB FlexTape Starter Extension Lead

-5/13/20

12/24VDC RGB Back-to-Back Connector 24” (60 cm) 3/16” 48” (120 cm)

(5 mm)

Part #

Description

L-TPE-BTB-RGB-1

RGB FlexTape® Back-to-Back Connector

1/2” (12 mm)

12/24VDC 6 Output Adaptor 5/16” (8 mm) 5/16” (8 mm)

RGB Link Cord

L-TPELNKx-RGB-1

081220

9/32” (7 mm)

7/16” (11 mm)

12/24VDC RGB Link Cord

3/16” (5 mm) 1/2” (12 mm)

2” (5 cm) 6” (15 cm) 10” (25 cm) 24” (60 cm) 48” (120 cm) 72” (180 cm)

Part #

Description

L-4P6O-1

4 Position, 6 Output Adaptor - White

Part #

Description

L-TPELNK5-RGB-1

5 cm (2”) RGB FlexTape® Link Cord

L-TPELNK15-RGB-1

15 cm (6”) RGB FlexTape® Link Cord

L-TPELNK25-RGB-1

25 cm (10”) RGB FlexTape® Link Cord

L-TPELNK60-RGB-1

60 cm (24”) RGB FlexTape® Link Cord

L-TPELNK120-RGB-1

120 cm (48”) RGB FlexTape® Link Cord

L-TPELNK180-RGB-1

180 cm (72”) RGB FlexTape® Link Cord

Part #

Description

L-RGBWIRE25-1

25' (7.6 m) 22AWG RGB Wire Roll

L-BS4PBL-1

12/24VDC Barrier Splice 4 Position Black

L-RGBWIRE25-1

12/24VDC RGB DIY L-BS4PBL-1

L-BS4PBL-1

11/16” (17.5 mm)

1” (25 mm) 9/16” (15 mm)

104

25’ (7.6 m) 2-1/8” (54 mm) 1-11/15” (44 mm) 1-1/15” (27 mm) 11-32” (9 mm) 7/8” (22 mm)

11/16” (17.5 mm)

L-BS4PBL-1

7/8” (22 mm)

2-1/8” (54 mm) 1-11/15” (44 mm) 1-1/15” (27 mm) 11-32” (9 mm)

1-800-227-1171 | trescolighting.com

12VDC 24V DC

EXTRUSION

1-800-227-1171 | trescolighting.com

105

12VDC 24V DC

Infinex

Infinex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixture sizes, simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is available in six profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. US PATENT NO: D783,533 and 9,618,194

6 profiles to choose from

FlexTape® slides into proprietary power feed end cap

Clear, frosted and milk diffusers snap on/off for easy installation and removal.

Mounting Types: SCREW

U-CLIP

SWIVEL CLIP

MAGNET

RECESSED

See individual profiles for mounting options available

IN MADE THE USA

106

1-800-227-1171 | trescolighting.com

Infinex System Components

Required Optional

Extrusions

L-XANG72-SC-1 L-XANG72-**-1 L-XCRV72-SC-1 L-XCRV72-**-1 L-XREC72-SC-1 L-XREC94-SC-1 L-XREC72-BL-1 L-XREC94-BL-1 L-XRND72-SC-1 L-XRND72-BL-1 L-XSQR72-SC-1 L-XSQR72-**-1 L-XFL72-SC-1 L-XFL94-SC-1

Couplers

L-EXTBTB10-1

Diffusers

L-X72-DIFF-CL-1 L-X72-DIFF-FR-1 L-X72-DIFF-MLK-1

Linking Cords

L-XLNK-15-**-1 L-XLNK-25-**-1 L-XLNK-60-**-1 L-XLNK-120-**-1 L-XLNK-180-**-1

End Cap Sets

L-XANGECP-GY-1 L-XANGECP-**-1 L-XCRVECP-GY-1 L-XCRVECP-**-1 L-XRECECP-GY-1 L-XRECECP-BL-1 L-XRNDECP-GY-1 L-XRNDECP-BL-1 L-XSQRECP-GY-1 L-XSQRECP-**-1

Mounting Plates L-EXTMP-VHB-1

Starter Cord 12VDC:

L-XPKT-2M-WH-1 L-XPKT-2IN-WH-1 L-XPKT-2M-BL-1 L-XPKT-2IN-BL-1 24VDC: L-24XPKT-2M-BL-1 L-24XPKT-2M-WH-1

Magnet

U-Clips

L-XRM42-155-1

L-XRND-UCLP-1 L-XSQR-UCLP-1 L-XSQRSWCLP-1

Custom Solutions

CUSTOM SOLUTIONS Take control of your lighting through Tresco's custom Infinex solutions. From length, to light output, to screw versus magnetic mounting, you dictate the options of your unique fixture. Once decided, we will manufacture it in our USA headquarters. No more worries about international shipping delays or extended holidays. Every light is quality checked and bears the cULus marking denoting its safe operation. Don't settle for something "close", choose Infinex and get exactly what you want. Go to trescolighting.com to submit your project and receive a custom quote.

CUSTOM FULLY ASSEMBLED FIXTURES

NO MINIMUM REQUIREMENT

MADE IN THE U.S.A. AND SHIPS WITHIN 7 DAYS! 6 unique profiles 30 light output options

Black or white cords (multiple lengths) 4"- 96" (101 mm - 2438 mm) fixture lengths in 1/16" (1.6 mm) increments 3 diffuser options (clear, frosted, milk) Bulk, individual, or kit packaged No minimum quantity required Quick turnaround

1-800-227-1171 | trescolighting.com

107

Infinex

INFINEX INTEGRATED CONTROL OPTIONS

Dimmer Only

IN MADE THE USA

Dimmer/Motion Combo

Features: Controls are elegantly and fully integrated into the made-to-order Infinex fixture ON/OFF and dimming controls use a glowing digital button for easy visual recognition An optional fully-integrated occupancy sensor available to automatically turn the fixture off after 30-minutes of no activity or Tresco® can customize the desired time delay Easily switch between manual and occupancy sensor modes Returns to last setting when turned on

Typical Applications: • Hospitality applications utilizing the integrated occupancy sensor for:

- Hotel or hospital closet, vanity or headboard lighting

- Task lighting for nurses’ stations

• Attach under: furniture and bathroom cabinetry • Office furniture: task lighting under overhead shelves, bins, cabinets and privacy booths • Under residential or commercial cabinetry to illuminate a countertop and/or backsplash • Retail: utilize the integrated occupancy sensor to turn display lighting on when customers approach

Dimmer Only Touch ON/OFF Gradual dimming from 100%-5% Power failure memory (retains last setting) 10 hour automatic energy saving shutoff

Dimmer/Motion Sensor Combo 4 step dimming 100/75/50/25 30 minute preset motion sensor* Motion sensor can be deactivated Dimmer works in motion sensor mode or standalone mode 10 hour automatic energy saving shutoff in dimmer only mode *Motion sensor time can be customized by Tresco® Lighting

Not sold individually for DIY Infinex

108

1-800-227-1171 | trescolighting.com

Infinex

BLEND SERIES

See “At a Glance” chart for extrusion styles and finishes available

Available in a variety of finishes. Custom finishes also available

In Stock

Black (BL)

Dark Cherry (DC)

Natural Soft Maple (NSM)

Satin Nickel (SC)

White (WH)

Available with 1000 Ft. Min. Order

? Medium Cherry

Light Cherry

Contemporary Cherry

Walnut

Natural Oak

Dark Oak

Pear

Sample rings available

Color Matching*

* Color Matching will match any color sample and is available with 1000 ft. minimum order

1-800-227-1171 | trescolighting.com

109

Infinex

DIY INFINEX

1 1a

SQUARE

DESIGN YOUR LIGHT

PROFILE SHAPE

6 unique profiles to choose from!

CURVED

PICK YOUR FINISH

LIGHT OUTPUT

FLUSH

RECESSED

Available in a variety of finishes. Custom finishes also available. Not all finishes available with all shapes.

Ranging from 1.5W to 5.5W

ANGLED

DIFFUSER

STARTER CORD

Clear, frosted and milk diffusers

Standard FlexTape®Starter Cord for Recessed or Flush

Infinex Starter Cord

1f SCREW

MOUNTING

SWIVEL CLIP

U-CLIP

MAGNET

See individual profiles for mounting options available

110

ROUND

1-800-227-1171 | trescolighting.com

RECESSED

EXTRUSION OPTIONS AT A GLANCE

Square

Curved

Recessed

Flush

Angled

Round

Surface Mounting

Recessed Mounting

U-Clip Mounting

Magnet Mounting

Available Finishes

Satin Nickel, Black, White, Dark Cherry, Natural Soft Maple, Custom

Satin Nickel, Black

Satin Nickel

Satin Nickel, Black, White, Dark Cherry, Natural Soft Maple, Custom

Satin Nickel, Black

Available Diffusers

Clear, Frost, Milk

Milk

Clear, Frost, Milk

FLEXTAPE® AND DIFFUSER OPTIONS AT A GLANCE 1.5W FlexTape®

3W FlexTape®

4.4W FlexTape®

4.4W 12VDC COB FlexTape®

5.5W 24VDC COB FlexTape®

5.5W FlexTape®

1.5W EquiLine Tape

3W EquiLine Tape

4.4W EquiLine Tape

Lumens w/ Clear Infinex Diffuser

125

310

355

210

330

520

115

215

335

Lumens w/ Frosted Infinex Diffuser

115

285

325

195

305

480

105

200

310

Lumens w/ Milk Infinex Diffuser

235

270

160

255

395

165

255

1-800-227-1171 | trescolighting.com

111

Infinex

CUT TO SIZE

Aluminum extrusions can be cut by various pieces of equipment. For the best performance and longest life, use a saw blade designed for non-ferrous, thin stock on your miter saw. It is also highly recommended to cut extrusion with diffuser securely attached via clamps, tape, stretch wrap etc. to prevent unwanted cracking of diffuser.

ASSEMBLE

Diffuser

Starter Cord FlexTape

Screw

Screw End Cap Magnet

U-Clip Square extrusion shown. Check mounting options for other extrusions.

Extrusion Magnet U-Clip

112

1-800-227-1171 | trescolighting.com

End Cap

Infinex

EXTRUSION STYLES AND FEATURES Profile

SQUARE

1/2" (12 mm)

MOUNTING

11/16" (18 mm)

U-Clips sold separately

End Caps Sold Separately

Couplers Sold Separately

Features

Available stock finishes

Surface mount using magnets, U-Clips or screws Easily slide magnets into channel on bottom of light Uses Infinex starter leads

Black (BL)

Dark Cherry (DC)

Natural Soft Maple (NSM)

CURVE

Satin Nickel (SC)

White (WH)

Profile

MOUNTING 1/2" (13 mm)

1-11/16" (42.5 mm)

U-Clips sold separately

Couplers Sold Separately

Features

End Caps Sold Separately

Available stock finishes

Surface mount using magnets, U-Clips or screws Easily slide magnets into channel on bottom of light Uses Infinex starter leads

Black (BL)

1-800-227-1171 | trescolighting.com

Dark Cherry (DC)

Natural Soft Maple (NSM)

Satin Nickel (SC)

White (WH)

113

Infinex Profile

ANGLE

9/16" (14 mm)

MOUNTING

1-1/8" (28.5 mm)

11/32" (9 mm)

30° Angle End Caps Sold Separately

Features

Available stock finishes

For corner mounting with screws only Fixture directs light at 30° angle Uses Infinex starter leads

Black (BL)

Dark Cherry (DC)

Natural Soft Maple (NSM)

Satin Nickel (SC)

Profile

ROUND

11/16" (18 mm)

MOUNTING

0°

15° Features

White (WH)

U-Clips sold separately

1" (25 mm)

30° End Caps Sold Separately

U-Clip mounting allows fixture to be rotated in 15° increments either direction (30°, 15°, 0°, -15°, -30°)

Available finishes

Uses Infinex starter leads Black

114

1-800-227-1171 | trescolighting.com

Satin Nickel

Infinex Profile

RECESSED

1/16" (2 mm) 5/16" (8 mm)

MOUNTING

7/8" (23 mm)

7/8” (22.6 mm)

~7/8 [22,6]

1/4” (6 mm)

11/16” (18 mm)

Features

~1/4 [6,4]

~11/16 [17,7]

End Caps Sold Separately

7/16” (11.5 mm)

Grooved sides allow extrusion to pressure fit into place*

Recessed End Cap Dimensions:

Uses standard FlexTape® starter lead

7/8” (22.6 mm)

*With Endcap: Route a channel in wood 21/64" (8.33 mm) depth minimum x .750" (19 mm) width and pressure fit this extrusion in place.

1/4” (6 mm)

7/16” (10.6 mm)

Without Endcap: Route a channel in wood 9/32" (7.14 mm) depth minimum x .750" (19 mm) width and pressure fit this extrusion in place.

~7/16 [11]

3/4” (19.4 mm)

11/16” (18 mm) ~3/4 [19,4]

7/16” (11.5 mm)

3/8” (9 mm)

Available finishes

Recessed extrusion uses standard FlexTape® starter lead. (L-LED-TPEPKT-2M-1, L-24B2SPKT-2M-1) 7/16” (10.6 mm)

Black

3/4” (19.4 mm)

FLUSH

Satin Nickel

Profile 7/16" (11 mm)

MOUNTING

3/4" (19 mm)

No End Caps

Features No end caps…this extrusion is meant for channels that go the entire width or height of the casework

Available finishes

Comes with milk diffuser (unattached) Uses standard FlexTape® starter lead *Route a channel in wood 7/16" (11 mm) depth x 3/4" (19 mm) width and pressure fit this extrusion in place.

Satin Nickel

Flush extrusion uses standard FlexTape® starter lead. (L-LED-TPEPKT-2M-1, L-24B2SPKT-2M-1)

1-800-227-1171 | trescolighting.com

115

Extrusion

All product dimensions and specifications are subject to change without prior notice.

Extrusions L-XANG

9/16” (14 mm)

1-1/8” (28.5 mm)

11/32” (9 mm) L-XCRV

1-11/16” (42.5 mm) 1/2” (13 mm)

1/16”

L-XREC

(2 mm)

Part #

Description

L-XANG72-SC-1

72" (1.8 m) Angled Extrusion Satin Clear

L-XANG72-**-1

72" (1.8 m) Angled Extrusion Other Finishes

L-XCRV72-SC-1

72" (1.8 m) Curved Extrusion Satin Clear

L-XCRV72-**-1

72" (1.8 m) Curved Extrusion Other Finishes

L-XREC72-SC-1

72" (1.8 m) Recessed Extrusion Satin Clear

L-XREC94-SC-1

94" (2.4 m) Recessed Extrusion Satin Clear

L-XREC72-BL-1

72" (1.8 m) Recessed Extrusion Black

L-XREC94-BL-1

94" (2.4 m) Recessed Extrusion Black

L-XRND72-SC-1

72" (1.8 m) Round Extrusion Satin Clear

L-XRND72-BL-1

72" (1.8 m) Round Extrusion Black

L-XSQR72-SC-1

72" (1.8 m) Square Extrusion Satin Clear

L-XSQR72-**-1

72" (1.8 m) Square Extrusion Other Finishes

L-XFL72-SC-1

72" (1.8 m) Flush Extrusion Satin Clear with Milk Diffuser

L-XFL94-SC-1

94" (2.4 m) Flush Extrusion Satin Clear with Milk Diffuser

Required

**Insert BL for Black, WH for White, DC for Dark Cherry, NSM for Natural Soft Maple

7/8” (23 mm)

L-XSQR

L-XRND

5/16” (8 mm)

Optional

7/16” (11 mm)

1/2” (12 mm)

11/16” (18 mm)

3/4” (19 mm)

L-XFL

3/4” (19 mm)

11/16” (18 mm)

1” (25 mm)

For details see Power Supplies on Page 142.

Power Supplies

12VDC 24V DC 120V

COMPON ENTS Power Suppl

Infinex works with all Tresco 12VDC and 24VDC power supplies.

ies Contro llers Install Accessories

1-800-227 -1171 | trescoligh ting.com

141

Diffusers

11/16” (18 mm)

3/16” (5 mm)

Part #

Description

L-X**-DIFF-CL-1

Diffuser Clear

L-X**-DIFF-FR-1

Diffuser Frosted

L-X**-DIFF-MLK-1

Diffuser Milk

**Insert 72 for 72" (1.8 m) length, or 94 for 94" (2.4 m) length .71 [18,1]

End Cap Sets

L-XANGECP

.71 [18,1]

7/16” (11 mm)

3/4” (18 mm)

L-XANGECP-GY-1

Angled end cap set, Gray

L-XANGECP-**-1

Angled end cap set, Other Colors

L-XCRVECP-GY-1

Curved end cap set, Gray

L-XCRVECP-**-1

Curved end cap set, Other Colors

L-XRECECP-GY-1

Recessed end cap set, Gray

L-XRECECP-BL-1 7/8”

Recessed end cap set, Black

(22.6 mm)

L-XRNDECP-BL-1

Round end cap set, Gray 1/4” (6 mm)

L-XSQRECP-GY-1

11/16” (18 mm)

1-11/16” (42.5 mm)

Description

L-XRNDECP-GY-1 L-XCRVECP

9/16” (14 mm)

Part #

L-XSQRECP-**-1

Round end cap set, Black Square end cap set, Gray

7/16” (11.5 mm)

Square end cap set, Other Colors

**Insert BL for Black, WH for White, B1 for Dark Brown, B2 for Tan Flush extrusion does not take end caps.

L-XRNDECP

L-XRECECP

7/16” (10.6 mm)

L-XSQRECP

17/32” (14 mm)

3/4” (19 mm)

3/4” (19.4 mm)

116

.71 [18,1]

1” (25 mm)

1-800-227-1171 | trescolighting.com

3/4” (18 mm)

Extrusion

All product dimensions and specifications are subject to change without prior notice.

Jumper Cord

Required

1/16 in. 1-1/2 mm 1/8 in. (3 mm)

11/16 in. (17 mm)

1/16 in. (1-1/2 mm)

12/24VDC Infinex Starter Cords

Part #

L-XPKT-2M-XX-1 2” (49 mm)

3/8” (10 mm)

1” (25 mm)

3/8” (10 mm)

Description

L-XPKT-2M-BL-1

79" (2 m) 12VDC Infinex Starter Cord Black

Spool of LED FlexTape 20 ft. (6m)

L-XPKT-2IN-BL-1

L-24XPKT-2M-XX-1

Optional

3/8 in. (10 mm)

2" (50 mm) 12VDC Infinex Starter Cord Black

L-XPKT-2M-WH-1

79" (2 m) 12VDC Infinex Starter Cord White

L-XPKT-2IN-WH-1

2" (50 mm) 12VDC Infinex Starter Cord White

L-24XPKT-2M-BL-1

79" (2 m) 24VDC Infinex Starter Cord Black

L-24XPKT-2M-WH-1

2" (50 mm) 24VDC Infinex Starter Cord Black

To be used with square, curved, round and angled extrusions only.

12/24VDCHexhead Standard FlexTape® Starter Cords Connector 24V Starter Cord 79” (2m) L-24B2SPKT-2M

1/4” (6 mm)

L-LED-TPEPKT-2M-1

082120

1/2” (13 mm) 1/2” (13 mm)

Amp® Connector

1-1/2” (38 mm)

Starter Cord 79” (2 m)

79” (2 m) 2” (50 mm)

7/16” (11 mm) 1/4” (6 mm) 1/2” (13 mm)

.59 [15]

Part #

Description

L-LED-TPEPKT-2M-1

Power Cord 79" (2 m) 12VDC FlexTape® Straight Starter Lead 2 m (79 in.)

L-TPEPKT-2IN-1

2" (50 mm) 12VDC FlexTape® Straight Starter Lead

L-24B2SPKT-2M-1 Mounting Block

Cord 5 in. (127 mm)

DC-ELT60-CON Transformer

2 m (29") 24VDC FlexTape® Barrel/2 Screw Trml Starter Lead, White

Recessed and Flush extrusions uses standard FlexTape® starter lead.

1/2” (13 mm)

L-24B2SPKT-2M-1

.59 [15]

U-Clips/Magnets 5/16” (8mm)

9/16” (15mm)

13/16” (20mm)

1” (26mm)

L-XSQR-UCLP

L-XRND-UCLP

SIDE

Part #

Description

L-XRND-UCLP-1

Round U-Clips Set (2 Clips)

L-XSQR-UCLP-1

Square/Curved U-Clips Set (2 Clips)

L-XSQRSWCLP-1

Square/Curved Swivel Clips Set (2 Clips)

L-XRM42-155-1

Set of 2 Magnets

L-EXTMP-VHB-1

Set of 2 Mounting Plates

1.5” (38mm)

1/2” (13mm)

1-1/4” (38mm)

1/16” (2mm)

One U-Clip/magnet is recommended for every 1 ft. (.3 m) of extrusion. No. #4 Phillips flat head screws are included with each U-Clip set. Mounting Plates to be used with magnet mounted Infinex.

3/4” (19mm)

L-XSQRSWCLP 1/16” (2mm)

BOTTOM

Couplers

.65in (16mm)

1.5” (38 mm) .5” (13 mm)

Part #

Description

L-EXTBTB10-1

Pack of 10 Couplers

To be used on square and curved extrusions only.

12/24VDC Linking Cords .5in (13mm)

6” (152 mm) 10” (254 .5in mm) 24” (609(13mm) mm) 48” (1.2 m) 72” (1.8 m)

.0.5” (13 mm)

.0.6” (15 mm)

AMP (FEMALE)

1.5” (38mm)

1.25in (38mm)

L-XRM42-155

AMP (MALE)

Part #

Description

L-XLNK-15-**-1

6" (15 cm) Infinex Linking Cord

L-XLNK-25-**-1

10" (25 cm) Infinex Linking Cord

L-XLNK-60-**-1

24" (60 cm) Infinex Linking Cord

L-XLNK-120-**-1

48" (120 cm) Infinex Linking Cord

L-XLNK-180-**-1

72" (180 cm) Infinex Linking Cord

** Insert BL for Black and WH for White End Caps not used on linked extrusion ends.

XLNK-6 6in (152mm)

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

XLNK-10 A=10in (254mm) XLNK-24 A=24in (609mm) XLNK-48 A=48in (1.2m) XLNK-72

1-800-227-1171 | trescolighting.com

117

118

1-800-227-1171 | trescolighting.com

12VDC 24V DC

PANEL

1-800-227-1171 | trescolighting.com

119

12VDC

Etch Panels provide the perfect solution for commercial and residential backlighting and shelf lighting applications with high light output, uniform intensity and an extremely low profile between the LED panel and the illuminated material. Order it fully constructed or pre-etched panels only.

Etch

US PATENT NO: 10,113,708 and 10,473,305 IN MADE THE USA

Features: Fully customized, assembled, and ready to plug-in 12VDC - 5W/ft. Available in (5) color temperatures: 3000K, 3500K, 4000K, 5500K, and 6500K Short lead times (4-7 days typical)* Premium acrylic for optical clarity Optimized Etch pattern for even illumination *High volume orders will begin shipping within 7 days but may not ship in full

Typical Applications: Displays Exhibits Signage Store Fixtures Countertops Backsplashes Modesty Panels

012518

Shelving

Made in the USA at Tresco's manufacturing facility in Louisville, KY

120

Etch Panel - A2. Standard wire option detail

Unique patented edge-lighting and LED process provides high output with even illumination

Requires zero separation between the light panel and the backlit surface

Listed in SAM Manual

Dimensions:

Acrylic Only 5/16” (8 mm)

Fully Assembled with backer 3/8" (9.8 mm) 1/16" (1.5 mm)

11/32" (8.8 mm) Thicknesses are subject to the industry standard of +/-10 % for acrylic

1-800-227-1171 | trescolighting.com

Etch

Controller

Typical Setup:

(Rotary Dimmer shown)

(Standard wire exit shown)

Power Supply

(18W Power Supply shown)

Etch Mounting Block

Required

(Included with power supply)

Optional

Controllers

Power Supplies

see controller section

see power supply section

Specifications:

Wattage 5W/ft. (16.4W/m)

Per LED populated edge of panel

Lumens

Input Voltage

Diode Life

Mounting

Minimum Size

Maximum Size

Environment

Warranty

100 per watt

12VDC

50,000 Hours

Surface

4" x 4" (102 mm x 102 mm)

48" x 96" (1219 mm x 2438 mm)

Dry and damp locations only

3 Year

Color Temperature

Warm White

2700K

Warm to Neutral

3000K

Cool White

4500K

Warm Neutral Neutral (3000K) (3500K) (4000K)

Daylight

5500K

Cool (5500K)

6500K

Daylight (6500K)

(Custom color with minimum order)

1-800-227-1171 | trescolighting.com

121

Etch Specifications by Size Size

LED Strip

Wattage

Wire Exits

6" x 6" (152 mm x 152 mm)

1 Edge

2.5W

12" x 12" (305 mm x 305 mm)

1 Edge

24" x 24" (610 mm x 610 mm)

2 or 4 Edges

20W/40W

36" x 36" (915 mm x 915 mm)

2 or 4 Edges

30W/60W

48" x 48" (1219 mm x 1219 mm)

2 or 4 Edges

40W/80W

48" x 96" (1219 mm x 2438 mm)

2 Edges

60W

How to Select Number of LED Edges One Edge

Two Edges

All Edges

Panel width up to 15" (381 mm)

Panel width over 15" (381 mm)

Typically used for perfect squares and larger sizes.

Typical Surface Brightness Measure Only 10% drop in surface Illuminance from edge of panel to center (based on largest panel size). 96" (2438 mm)

LEDs

Only 10% Drop

48" (1219 mm)

LEDs

122

1-800-227-1171 | trescolighting.com

Etch 1 or 2 Sided Illumination

Minimize Seams When Tiling Minimum distance to minimize seams between material and Etch panels.

1-Sided

Backlit Material

Backer

2-Sided (No Backer) 3" (76 mm) min. distance

(Depending on backlit material)

Panel 1

Panel 2

Cord Exit Options 79" (2 m) Starter cord location is customizable

LEDs will be placed on long edges unless specified as short edge on the RFQ form.

Wirewire Exit Etch Standard Panel - A1. Standard option

EtchSide Panel -Wire B1. Side wire option Exit

012418

Exit LED Edge

Etch Panel - C1. Bottom wire option

Exit Non-LED Edge

Exit LED Edge Bottom Side

Face

dg Etch Panel - B2. Side wire option detail ge 012518 DE Etch Panel - A2. StandardDwire Ed option detail LE

E Etch Panel - A2. Standard wire option detail L

e dg

DE Etch Panel - C2. Bottom wireLEoption detail

012518

Etch Panel - B2. Side wire option detail

012518

Bottom Wire Exit

012518

Etch Panel - C2. Bottom wire option detail

121417

Metal Clip Acrylic

Metal Clip

Metal Clip 3/8” (9.8 mm)

Acrylic

11/32” (8.8 mm)

11/32” (8.8 mm) Backer

3/8” (9.8 mm)

79” (2 m) 1/16” (1.5 mm)

79” (2 m)

Strain Relief

Backer

Metal Clip

1/16” (1.5 mm)

3/8” (9.8 mm)

Strain Relief

1/16” (1.5 mm)

Acrylic

11/32”11/32” (8.8 mm) (8.8 mm)

79” (2 m)

Acrylic

3/8” (9.8 mm)

Strain Relief

Acrylic

11/32” (8.8 mm) 1/16” (1.5 mm)

Backer

1-800-227-1171 | trescolighting.com

1/16”

Metal(1.5 Clipmm)

1/16” (1.5 mm)

17/32” (13.5 mm)

11/32” (8.8 mm)

Backer

17/32” (13.5 mm)

79” (2 m)

79” Strain Relief (2 m)

Strain Relief

123

121417

Etch Mounting Options

Cosmetic Tape Color The cosmetic tape hides the LEDs and reflects light back into the panel. Cosmetic tape overlaps the face of the panel only along the LED edge. On all edges without LEDs, the cosmetic tape only runs along the edge of the panel.

Secure panel with screws Drilling Instructions*: - Drill pilot holes before securing with screws - Use the highest grit bit as possible - Drill on flat supportive surface - Don't drill within 1/4" (7 mm) of edge of panel *Tresco Lighting is not responsible for any splintering or any other errors that may occur with drilling a panel on site.

1/4" (7 mm)

Area safe to drill*

Silver

White

Flush with side

Mounting Clips Optional mounting clips available.

Covers LEDs on LED edge

Decorative Diffusers Decorative diffusers are an optional addition for one illuminated side of panel. They are useful for both diffusing the light emitted from the panel and for their unique aesthetic designs. Common applications are for decorative shelving and facades. Rigid White/Milk up to 48" x 96" (1219 mm x 2438 mm)

RIGID WHITE/MILK

Decorative film up to 24" x 72" (610 mm x 1829 mm)

2.5 MM HEXAGON PATTERN

10 MM HEXAGON PATTERN

*Rigid diffuser available up to 48" x 96" (1219 mm x 2438 mm). Available in White/Milk only.

124

1-800-227-1171 | trescolighting.com

TRI-PYRAMID PATTERN

TRIPLE WAVE PATTERN

Etch

BUILD YOUR OWN Choose our Build Your Own Program, featuring pre-etched acrylic panels in (4) sizes and pre-soldered LED tapes in (5) color temperatures in (4) lengths up to 96” (2438 mm), for the perfect DoIt-Yourself LED panel. Simply purchase your preferred Etch size and tape color temperature and install in your own frame.

1. Buy pre-cut panels or cut-to-size

2. Buy 6 mm LED tape

3. Install in your frame

Etched Panels Only - to be cut down to size Part #

Description

L-ACR6M-4X8-1

48" X 96"* (1219 mm x 2438 mm) 6 mm Etched Acrylic

L-ACR8M-4X8-1

48" X 96"* (1219 mm x 2438 mm) 8 mm Etched Acrylic

L-ACR6M-4X4-1

48" X 48"* (1219 mm x 1219 mm) 6 mm Etched Acrylic

L-ACR8M-4X4-1

48" X 48"* (1219 mm x 1219 mm) 8 mm Etched Acrylic

L-ACR6M-2X2-1

24" X 24" (610 mm x 610 mm) 6 mm Etched Acrylic

L-ACR8M-2X2-1

24" X 24" (610 mm x 610 mm) 8 mm Etched Acrylic

L-ACR6M-1X1-1

12" X 12" (305 mm x 305 mm) 6 mm Etched Acrylic

L-ACR8M-1X1-1

12" X 12" (305 mm x 305 mm) 8 mm Etched Acrylic

*Standard dot pattern optimized for up to 24" (610 mm) width with LEDs on 2 edges Thicknesses are subject to the industry standard of +/-10 % for acrylic

Note: Pre-etched panels are optimized for up to 24" (610 mm) with LED on (2) edges. Use (1) edge LED strip for 15" (381 mm) width and under. For widths greater than 24" (610 mm) call for custom options.

Tape LED for Pre-Etched Panels Part #

Description

L-TPE6-12IN-**K-1

12" (305 mm) 5.5W/ft, 6 mm Pre-Soldered Tape LED w/ 79" (2 m) White input Lead

L-TPE6-24IN-**K-1

24" (610 mm) 5.5W/ft, 6 mm Pre-Soldered Tape LED w/ 79" (2 m) White input Lead

L-TPE6-48IN-**K-1

48" (1219 mm) 5.5W/ft, 6 mm Pre-Soldered Tape LED w/ 79" (2 m) White input Lead

L-TPE6-96IN-**K-1

96" (2438 mm) 5.5W/ft, 6 mm Pre-Soldered Tape LED w/ 79" (2 m) White input Lead

** = color temperature (30 for 3000K, 35 for 3500K, 40 for 4000K, 55 for 5500K, 65 for 6500K) *Custom wire lead available upon request

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

125

ETCH ORDERING GUIDE

We recommend ordering a kit before placing an order: Part #

Description

L-PANELKIT-DO1

8"x10" (203 mm x 508 mm) Panel With Backer and Power Supply

L-PANELKIT-DO2

8"x10" (203 mm x 508 mm) Panel Without Backer and Power Supply

Name: ____________________________________________________

Distributor: _______________________________________________

Company: _________________________________________________

Project Name: _____________________________________________

Phone: ____________________________________________________

Project Description: _______________________________________

Zip Code: __________________________________________________

Estimated Quantity: ______________________________________

Email: _____________________________________________________

Date Required: ____________________________________________

1 Panel Dimensions 48" x 96" (1219 mm x 2438 mm) max If used in frame:

Length (in): _____________

Channel Width (in): _____________

Width (in): ______________

Channel Depth (in): _____________

2 LED Location Long Edge (Standard) Short Edge

3 Mounting Clips

4 Wire Exit

Yes

Standard

Side Bottom

Unsure (Tresco to specify)

5 LED Color Temperature

8 Decorative Diffusers

6 Backer

3000K

Yes

(Single Sided Illumination)

Rigid White

3500K

2.5 mm Hexagon Pattern (Film)

4000K

(Double Sided Illumination)

7 Cosmetic Tape Color

5500K (Standard)

White (Standard)

6500K

Silver

Tri-Pyramid Pattern (Film) Triple Wave Pattern (Film) None Film available up to 24” (610 mm) x 72 (1829 mm)” Rigid available up to 48” (1220 mm) x 96” (2438 mm)

Submit form to customquotes@trescolighting.com or fax to 502-491-2215 c/o Tresco Lighting 126

10 mm Hexagon Pattern (Film)

For online submittal: trescolighting.com/etch-form

1-800-227-1171 | trescolighting.com

9 Will the panel be mounted vertically? Yes No If yes, and using a rigid diffuser, the edge tape will wrap over the top of the diffuser to help secure it.

10 Special Instructions

127

Standard:

24V DC

8W/ft

High:

15W/ft2

Snap

Standard:

900Lumens 1670Lumens High:

120°

Customized lighting solutions are just a "snap" away with the Snap Panels. Sold in 12" x 12" (305 mm x 305 mm) squares, the razor-thin panels can be snapped down to 3" x 3" (76 mm x 76 mm) squares and connected back into any configuration, creating the perfect solution with complete light uniformity.

Features: Offered in 15W/ft2 (high) and 8W/ft2 (standard) 24VDC System Available in (4) color temperatures: 3000K, 4000K, 5000K and 6500K Just 1.65 mm thick and extremely lightweight

Modular DIY system Typical Applications: Displays Exhibits Signage Store Fixtures Uplighting Countertops Backsplashes (Backlighting) Modesty Panels Cabinets

5 YEAR

COMMERCIAL GRADE

Listed in SAM Manual

Dimensions:

12” (305 mm)

Great for backlighting translucent countertops

128

Sold as 12" x 12" (305 mm x 305 mm) panels with (16) 3" x 3" (76 mm x 76 mm) snappable squares on each panel

1-800-227-1171 | trescolighting.com

12” (305 mm)

RA N T

Snap Typical Setup:

24VDC Adaptor

(AMP to Barrel Adaptor)

24VDC Adaptor

Controller

(Barrel to AMP Adaptor)

(Rotary Dimmer shown)

Power Supply

(96W 24VDC Power Supply shown) Required

Snap

Optional

Accessories:

24VDC Power Supplies Starter Cord

see power supply section L-SPPKT-305MM-1 L-SPPKT-1M-1 L-SPPKT-3M-1

Controllers

Snap Link Cord

see controller section L-SPLNK8-1 L-SPLNK25-1 L-SPLNK60-1 L-SPLNK120-1

Curtain Connectors Extensions

Connectors

L-24BBEXT-1M-1 L-24BBEXT-2M-1 L-24BBEXT-3M-1

L-SP3TCS-1 L-SP6TCS-1

L-SPBTB10-1 L-SP90BTB4-1

Wattage

Lumens

Efficacy (lm/W)

Standard

8W/ft2 (.5W per 3" square)

900

112

High

Specifications:

15w/ft2 (.94W per 3" square)

1670

Input Voltage

Diode Life

24VDC

50,000 Hours

Max Per 96W Power Supply

Mounting

Warranty

Beam Angle

Surface

5 Year

120°

12ft2

111

6.4ft2

Photometric Data

Color Temperature

Height

Standard

High

2 in

10,202Fc

18,995Fc

4 in

2,708Fc

5,401Fc

6in

1179Fc

2,196Fc

1 ft

295Fc

549Fc

3 ft

33Fc

61Fc

6 ft

8Fc

15Fc

(5 cm) (10 cm) (15 cm) (.3 m) (.9 m) (1.8 m)

(109,813lx) (29,148lx) (12,690lx) (3,175lx) (353lx) (88lx)

(204,460lx) Warm White

Warm to Neutral

Cool White

Daylight

(54,260lx) (23,637lx) (5,909lx) (656lx)

2700K

3000K

Warm (3000K)

4500K

Neutral (4000K)

5500K

Cool (5000K)

6500K

Daylight (6500K)

(163lx)

L-SP8WA-50K-1 (Standard) , L-SP15WA-50K-1 (High) Tested

1-800-227-1171 | trescolighting.com

129

Snap Curtain Connector

Linking Panel squares are tileable using our simple DIY connectors (no soldering necessary)

L-SP90BTB4-1

Just 2" (51 mm) of separation on average required between Snap and backlit surfaces. (8W or 15W) OR Just 4” (102 mm) of separation required between Snap and backlit surfaces when strips are spaced 3” (76 mm) apart. (15W only)

90-Degree Back-to-Back Link

Curtain connectors can be used to create rows (L-SP3TCS-1 and L-SP6TCS-1).

Mounting Adhesive mount clips and screws are included with each panel for mounting purposes.

Back to Back Link L-SPBTB10-1

Link Cord L-SPLNK8-1 L-SPLNK25-1 L-SPLNK60-1 L-SPLNK120-1

130

1-800-227-1171 | trescolighting.com

Snap Applications

Before

After

1-800-227-1171 | trescolighting.com

131

Snap

All product dimensions and specifications are subject to change without prior notice.

24VDC Light Panel 12” (305 mm)

12” (305 mm)

Panel Light - Starter Cord

022217

Part #

Description

L-SP8WA-30K-1

24VDC 8W 12" (305 mm) Square Snap Panel 3000K

L-SP8WA-40K-1

24VDC 8W 12" (305 mm) Square Snap Panel 4000K

L-SP8WA-50K-1

24VDC 8W 12" (305 mm) Square Snap Panel 5000K

L-SP8WA-65K-1

24VDC 8W 12" (305 mm) Square Snap Panel 6500K

L-SP15WA-30K-1

24VDC 15W 12" (305 mm) Square Snap Panel 3000K

L-SP15WA-40K-1

24VDC 15W 12" (305 mm) Square Snap Panel 4000K

L-SP15WA-50K-1

24VDC 15W 12" (305 mm) Square Snap Panel 5000K

L-SP15WA-65K-1

24VDC 15W 12" (305 mm) Square Snap Panel 6500K

Mounting clips and screws included. Starter cords sold separately. 39”,118” 24VDC Starter Cord (30512”, mm, 1 m, 3 m )

1-1/2” (38 mm)

7/16” (11 mm) 3/8” (10 mm)

3/16” (5 mm)

Part #

Description

L-SPPKT-305MM-1

305 mm (12") Snap Panel Starter Lead

L-SPPKT-1M-1

1 m (39") Snap Panel Starter Lead

L-SPPKT-3M-1

3 m (118") Snap Panel Starter Lead

3/8” (10 mm)

24VDC Power Supplies

For details see Power Supplies on Page 142.

Part #

Description

L-24DCELT96-1

96W 24VDC Power Supply w/ 5 Barrel Out - White†

L-24DCELT48-BL-1

48W 24VDC Power Supply w/ 5 Barrel Out - Black†

L-24DCELT15WP-1

15W 24VDC Wall Mount Power Supply w/ Snap Connector*†

L-24DCH96X1-1

96W 24VDC Dimmable Hardwire Power Supply*§

L-24DCH96X3-1

288W 24VDC Dimmable Hardwire Power Supply*§

L-1BRL5-1

Extra 5 Output Barrel Splice

*Does not come with 5 Output Barrel Splice †Dimmable on trailing edge (24VDC side) § Dimmable by LED line voltage (120V) wall dimmers

Snap Connectors 1/2” (13 mm)

022717 Panel Light - Link Cord 13/32” (10 mm)

1/4” (6 mm)

3/8” (10.16 mm)

13/32” (10 mm)

Part #

Description

L-SPBTB10-1

Snap Panel Back-to-Back Links (10 pcs)

L-SP90BTB4-1

Snap Panel 90° Back-to-Back Link (4 pcs)

Part #

Description

L-SPLNK8-1

3” (8 cm) Snap Panel Link Cord

L-SPLNK25-1

10” (25 cm) Snap Panel Link Cord

L-SPLNK60-1

24” (60 cm) Snap Panel Link Cord

L-SPLNK120-1

48” (120 cm) Snap Panel Link Cord

Part #

Description

L-SP3TCS-1

Three Way Curtain Starter Lead

L-SP6TCS-1

Six Way Curtain Starter Lead

Part #

Description

L-24BBEXT-1M-1

1 M (39") 24VDC ML/FML Barrel Extension, White

L-24BBEXT-2M-1

2 M (79") 24VDC ML/FML Barrel Extension, White

L-24BBEXT-3M-1

3 M (119") 24VDC ML/FML Barrel Extension, White

7/32” (5 mm)

Snap Link Cord 3”, 10”, 24”, 48” (8 cm, 25 cm, 60 cm, 120 cm )

3/16” (5 mm)

3/8” (10 mm) (103/8” mm) 3 Way Curtain Starter Cord (top view) - 3TCS

082420

24VDC Curtain Connectors 6” (152 mm) 3” (76 mm)

24VDC Extension Leads 39”, 79”, 118” (1 m, 2 m, 3 m )

1-1/2” (38 mm) 7/16” (11 mm)

132

1-800-227-1171 | trescolighting.com

Required Optional

12VDC

SPECIALTY

1-800-227-1171 | trescolighting.com

133

1.5W

12VDC

70 Lumens

25°

Creating a custom jewelry, museum or glass case light system has never been easier than with the Stax vertical spotlight series. Light modules and spacers snap together in seconds according to your desired configuration. Once installed, twist and pivot the modules and spotlights to aim the light exactly where needed. Build it short or stack it tall, Stax is sure to turn the ordinary into extraordinary.

Stax

Features: 12VDC; High output and highly efficient at just 1.5W per LED light module Modules and LED lights can be twisted and positioned to almost any angle desired 360º horizontal and 60º vertical movement Stackable up to 18" (457 mm) Typical Applications: Stax LED Lights • L -STX 082814

Stax LED Lights • L -STX

Showcases

15/16" (24 mm)

Displays End Cap

9/16" (14 mm)

Jewelry cases Light Unit

Available 2-1/8" (54 mm) Customizable system allows easy addition/removal

15/16" (24 mm)

Museum cases 9/16" (14 mm)

Light Unit

46mm (1-7/8") Finishes:

2-1/8" (54 mm) Black (BL)

End Cap

Stax LED Stax LED Lights Lights •• LL -STX -STX 15/16" 15/16" (24 (24 mm) mm)

Nickel NI)

End End Cap Cap

9/16" 9/16" (14 mm) mm) (14 Light Light Unit Unit

Dimensions:

Spacer Unit

Spacer Unit 2-1/8" (54 mm) 2-1/8" 2-1/8" (54 mm) mm) (54

2-1/8" (54 mm)

Base Trim

Base Unit

Starter Cord 79” (2 m)

1-3/8" (35 mm) Light and blank modules to fit your needs 1-5/8" (41 mm)

1-800-227-1171 | trescolighting.com

Base Unit Spacer Spacer Unit Unit

1-3/8" 2-1/8" (352-1/8" mm) (54 mm) (54 mm) 1-5/8" (41 mm)

Base Base Trim Trim

Starter Cord 79” (2 m)

Stax Typical Setup:

Stax

Mounting Block

(Included with power supply)

Controller

(Rotary Dimmer shown)

Required

Power Supply

(18W Power Supply shown)

Optional

Accessories:

Stax Light Module

Stax Light Starter Kit

Power Supplies see power supply section

L-STX-LITE-WBL-1 L-STX-LITE-WNI-1 L-STX-LITE-CBL-1 L-STX-LITE-CNI-1

L-STX-SKIT-WBL-1 L-STX-SKIT-WNI-1 L-STX-SKIT-CBL-1 L-STX-SKIT-CNI-1

Stax Blank Module

Controllers

see controller section

L-STX-BLNK-BL-1 L-STX-BLNK-NI-1

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Max Continuous Run

Mounting

Warranty

1.5W per LED light module

70 per LED light module

46.7

12VDC

30,000 Hours

40 light modules

N/A

Surface

3 Year

Beam Angle

25°

Color Temperature

Warm White

2700K

Warm to Neutral

3000K

Warm (3000K)

Cool White

4500K

Daylight

5500K

6500K

Cool (5000K)

See page 139 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

135

12VDC

Ascent

41 Lumens

20°

Let Ascent guide the way. Designed with the hotel industry in mind, it easily mounts to bed frames, nightstands, armoires and more. The featured time-adjustable PIR sensor illuminates for up to five minutes ensuring plenty of time to move about safely.

Features: 12VDC; 1W Integrated motion sensor Adjustable motion sensor operating time (30 seconds – 5 minutes) 2 mounting brackets included (90° and 116°) Typical Applications: Under the bed Interior cabinets Nightstands Closets Armoires

LED Accent

061915 5 YEAR

COMMERCIAL GRADE W

13/16” (21 mm)

RA N T

Available Finishes: 8-1/4” (210 mm)

Perfect for under the bed Nickel NI)

(1 21/ 6 .5 32” m m )

Dimensions: LED Accent

Motion sensor time adjustment dial

061915

79" (2 m)

13/16” (21 mm)

8-1/4” (210 mm)

19 1

Shown with 90° Mounting bracket

(218-1/ 4 0 m ” m )

21/32” (16.5 mm)

(2113/1 m 6” m )

1-800-227-1171 | trescolighting.com

Ascent Typical Setup:

Ascent

Mounting Block

(Included with power supply)

Power Supply

Required

(18W Power Supply shown)

Optional

Accessories:

Power Supplies see power supply section

Specifications:

Wattage

Lumens

Efficacy (lm/W)

Input Voltage

Diode Life

Max Per 60W Power Supply

Mounting

Warranty

Motion Detection Range

Motion Detection Angle

12VDC

20,000 Hours

60 Fixtures

Surface

5 Year

79'' (2 m)

110°

Photometric Data

Beam Angle

20°

Color Temperature

Height

Light Output

Beam Area

1ft

164.6Fc

.3ft L x .3ft W

3ft

18.29Fc (196.8lx)

(.3 m L x .3 m W)

6ft

4.57Fc

2ft L x 2ft W

(.3 m) (.9 m) (1.8 m)

(1777.7lx)

(49.1lx)

Warm White

Warm to Neutral

Cool White

Daylight

(.09 m L x .09 m W)

1ft L x 1ft W

(.6 m L x .6 m W)

2700K

3000K

Warm (3000K)

4500K

5500K

6500K

Cool (5000K)

L-HACNT-WNI-1 Tested

See page 140 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

137

All product dimensions and specifications are subject to change without prior notice.

12VDC

12VDC Dual USB Charging Station Features: USB charging station that ties into the universal 12VDC Tresco system 79" (2 m) starter cord attached (connects to any Tresco 12VDC power supply)

1-29/64” (37 mm)

Low profile recessed installation Max. load capacity = 1 port x 2.1 Amp or 2 ports x 1.05 Amp Two interchangeable face plates included (Black and Nickel) Draws 10W at max capacity while charging Has auto shut-off 79 “ (2 m)

1-1/4” (32 mm)

1-29/64” (37 mm)

1-7/64 “ (28 mm)

1-7/64" (28 mm) hole required.

1-29/64” (37 mm) 3/16” (4.5 mm)

Interchangeable face plates

1-1/4” (32 mm) 1-7/64” (28 mm)

79” (2 m)

See page 140 for part numbers and descriptions

138

1-800-227-1171 | trescolighting.com

15/16" (24 mm)

Stax

End Cap

9/16" (14 mm)

All product dimensions and specifications are subject to change without prior notice. Light Unit Stax Stax LED LED Lights Lights •• LL -STX -STX

2-1/8"

(54 mm) 12VDC Stax Starter Kit

15/16" 15/16" (24 mm) (24 mm)

End Cap End Cap

9/16" 9/16" (14 mm) (14 mm) Light Unit Light Unit

2-1/8"

Part #

Description

L-STX-SKIT-WBL-1

Stax Starter Kit, 3000K Black

L-STX-SKIT-WNI-1

Stax Starter Kit, 3000K Nickel

46mm L-STX-SKIT-CBL-1 (1-7/8") (1-7/8")

Stax Starter Kit, 5000K Black

L-STX-SKIT-CNI-1

Stax Starter Kit, 5000K Nickel

Starter kit includes (1) end cap, (1) light unit module, (1) base unit. Maximum height of 18" (457 mm) or 9 blank/light modules.

Base Trim

Stax LED Lights • L -STX Base Unit

1-3/8" (35 mm)

2-1/8" 2-1/8" (54 mm) (54 mm)

9/16" (14 mm)

ights • L -STX

15/16" (24 mm)

Starter Cord 79” (2 m)

Spacer Unit Spacer Unit

1-5/8" (41 mm)

Base Trim Base Trim

082814

Light Unit

Part #

Light Unit

Stax 1.5W Light Module, 3000K Black

L-STX-LITE-WNI-1

Stax 1.5W Light Module, 3000K Nickel

L-STX-LITE-CNI-1 End Cap

Description

L-STX-LITE-WBL-1

Stax LED Lights • L -STX 082814 L-STX-LITE-CBL-1 1-5/8" 15/16" 1-5/8" (24 (41mm) mm) (41 mm)

46mm (1-7/8")

Starter Cord Starter Cord 79” (2 m) 79” (2 m)

Base Unit Base Unit

End Cap

(35 mm)

082814

End Cap

12VDC Stax Light Module

2-1/8" 1-3/8" 1-3/8" (54 mm) (35 mm)

Optional

46mm

Spacer Unit (54 mm) 2-1/8" 2-1/8" (54 mm) (54 mm)

Required

082814 46mm 082814 (1-7/8")

Stax 1.5W Light Module, 5000K Black Stax 1.5W Light Module, 5000K Nickel

Maximum height of 18" (457 mm) or 9 blank/light modules.

9/16" (14 mm) Light Unit

46mm (1-7/8")

Spacer Unit 2-1/8" (54 mm) 2-1/8" (54 mm)

Spacer Unit

12VDC Stax Blank Module

Base Trim

Part #

Description

L-STX-BLNK-BL-1

Stax Blank Module Black

L-STX-BLNK-NI-1

Stax Blank Module Nickel

Base Trim

Base Unit

Spacer Unit

Base Unit

2-1/8" (54 mm)

Starter Cord 79” (2 m)

1-3/8" (35 mm)

Base Trim

1-5/8" 12VDC Power Supplies (41 mm) Base Unit 1-3/8" (35 mm)

12VDC 24V DC 120V

COMPO NENTS Power Supplies Controll ers Install Accessor ies

1-800227-117 1 | trescol ighting .com

141

Starter Cord 79” (2 m)

For1-5/8" details see (41 mm) Power Supplies on Page 142.

Part #

Description

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT30-1

30W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT60-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DC-EQ30-1

30W 12VDC Equiline Power Supply w/6 Snap Block*

L-DC-EQ60-1

60W 12VDC Equiline Power Supply w/6 Snap Block*

L-DCE30D-CON-1

30W 12VDC Hardwire Dimmable LED Power Supply†

L-DCE60D-CON-1

60W 12VDC Hardwire Dimmable LED Power Supply†

L-12DCH60X1-1

60W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

L-12DCH60X3-1

180W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

Starter Cord 79” (2 m)

COMPONENTS: POWER SUPPLIES, CONTROLLERS AND MORE SEE PAGE 141.

1-800-227-1171 | trescolighting.com

139

13/16” (21 mm)

8-1/4” (210 mm)

Ascent

All product dimensions and specifications are subject to change without prior notice. Required Optional

12VDC Ascent

Part #

Description

L-HACNT-WNI-1

12VDC 1W Ascent, 3000K, Nickel

L-HACNT-CNI-1

12VDC 1W Ascent, 5000K, Nickel

LED Accent

061915

13/16” (21 mm) Ascent lights are not dimmable.

LED Accent

061915

Includes starter cord 79" (2 m) and AMP connector with each light. 8-1/4”

(210 mm)

13/16” (21 mm)

8-1/4” (210 mm)

79" (2 m)

21/32” (16.5 mm)

12VDC Power Supplies

12VDC 24V DC 120V

COMPO NENTS Power Supplies Controll ers Install Accessor ies

1-800227-117 1 | trescol ighting .com

141

For details see Power Supplies on Page 142. 21/32” (16.5 mm)

21/32” (16.5 mm)

Part #

Description

L-DC-ELT18-CON-1

18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT30-1

30W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-SLELT60-1

60W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT6WP-CON-1

6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block*

L-DC-EQ30-1

30W 12VDC Equiline Power Supply w/6 Snap Block*

L-DC-EQ60-1

60W 12VDC Equiline Power Supply w/6 Snap Block*

L-DCE30D-CON-1

30W 12VDC Hardwire Dimmable LED Power Supply†

L-DCE60D-CON-1

60W 12VDC Hardwire Dimmable LED Power Supply†

L-12DCH60X1-1

60W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

L-12DCH60X3-1

180W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply§

12VDC Dual USB USB Drill-in Double Socket Charging Station

•

061915

12VDC Dual USB Charging Station

Part #

Description

L-HUSB2-BLNI-1

12VDC Dual USB Charging Station

1-7/64" (28 mm) hole required.

140

1-800-227-1171 | trescolighting.com

12VDC 24V DC 120V

COMPONENTS Power Supplies Controllers Install Accessories

1-800-227-1171 | trescolighting.com

141

All product dimensions and specifications are subject to change without prior notice.

Hole Size, if Needed:

5/8” (16 mm)

Power Supplies

12VDC Commercial Plug-in Power Supplies

6’ (1.8 m)

Hole Size, if Needed:

6” (152 mm)

1/2” (13 mm)

3-5/16” (84 mm)

18W

6” (152 mm)

12VDC

100V - 240V

1-1/4” (31.2 mm)_

4-1/4” (107 mm)

1-11/16” (43 mm)

L-DC-ELT18-CON-1

Mou

Cord Line Voltage Input Cord with Plug

1-1/4 in.

1-1/16” (27 mm)

Neutral (white wire) Ground (green wire) Line (black wire)

Hole Size,(31.2 if Needed: mm)

OUTPUT 12VDC L Black

Red

N White

Black

Mounting Block

3/4“ (19 mm)

INPUT

LED Power Supply 12VDC, 30W or 60W

D 12VDC Power Supply (30W)

C- SLELT30

Power Cord 8’ (2.4 m)

6’ (1.8 m)

5 YEAR

COMMERCIAL GRADE AR

RA N T

Mounting Block

13/16" (20 mm)

Features:

1/2" (13 mm) 6-1/8" (155 mm)

12VDC constant voltage output

2-1/8" (54 mm)

Short circuit protection* Overcurrent protection

6’ (152 mm)

2-3/8" (61 mm)

142

L-TRANS-MNT-BL-1

Cord Total Length 12" Compatible with all Tresco® low voltage dimmers (305 mm)

Dimmable on trailing edge (12VDC side)

15/16" (24 mm) * Automatic reset (no fuses) Power Cord 8' (2.4 m)

3-5/16” 84 mm

3-7/16" (88 mm)

RFI protection D 12VDC Power Supply (60W)

DC- SLELT60

6” 152 mm

1" (26 mm)

AMP Connector Hole size if needed 1/2” (13 mm)

Overload protection*

1-11/16” (43 mm)

5/8” (16 mm)

NOT compatible with hardwire wall dimmers 1-1/16”

(27 mm)

Part #

7" L-DC-ELT18-CON-1 (178 mm) L-TRANS-MNT-BL-1

1-800-227-1171 | trescolighting.com

Description 18W 12VDC Power Supply w/6 Snap Mounting Block 3/4” Extra 6 Snap Mounting Block

(19 mm)

1 41

Neutral (white wire) Ground (green wire) Line (black wire) OUTPUT 12VDC

All product dimensions and specifications are subject to change without prior notice.

L Black

Red

N White

Black

Power Supplies Mounting Block

INPUT

LED Power Supply 12VDC, 30W or 60W

30W

12VDC

100V - 277V

LED 12VDC Power Supply (30W) L-DC- SLELT30

Power Cord 8’ (2.4 m)

13/16" (20 mm) Line Voltage Input Cord with Plug

Neutral (white wire) Ground (green wire) Line (black wire)

6-1/8" 1" (155 Mounting mm) Block(26 mm)

OUTPUT 12VDC L Black

Red

N White

Black

INPUT

LED Power Supply 2-1/8" 12VDC, 30W or 60W (54 mm)

3-7 (88

AMP Connector

L-DC-SLELT30-1 LED 12VDC Power Supply (30W) L-DC- SLELT30

LED 12VDC Power Supply (60W) L-DC- SLELT60

60W

Power Cord 8’ (2.4 m)

13/16" (20 mm)

15/16" (24 mm) Power Cord 8' (2.4 m)

12VDC

100V - 277V

LED 12VDC Power Supply (60W) L-DC- SLELT60

6-1/8" (155 mm) 2-1/8" (54 mm)

1" (26 mm)

2-3/8" (61 mm)

3-7/16" (88 mm)

AMP Connector

7" (178 mm)

2-3/8" mm)

15/16" (61 (24 mm) Power Cord 8' (2.4 m)

Cord Length 12" (305 mm)

1/2" Total (13 mm)

Cord Total Length 12" (305 mm)

7" (178 mm)

L-DC-SLELT60-1

5 YEAR

Class 2

Features:

COMMERCIAL GRADE RA N T

Slim design, under 1” height (2) configurations: 30W or 60W 12VDC constant voltage output High power factor (Pf > .95) Short circuit protection* Overcurrent protection Overload protection*

Compatible with all Tresco low voltage dimmers NOT compatible with hardwire wall dimmers

RFI protection Dimmable on trailing edge (12VDC side) Class 2

Part #

Description

L-DC-SLELT30-1

30W 12VDC Power Supply w/6 Snap Mounting Block

L-DC-SLELT60-1

60W 12VDC Power Supply w/6 Snap Mounting Block

L-TRANS-MNT-BL-1

Extra 6-Snap Mounting Block

* Automatic reset (no fuses)

1-800-227-1171 | trescolighting.com

143

Power Supplies Economy Series

All product dimensions and specifications are subject to change without prior notice.

12VDC EquiLine Plug-in Power Supplies 6W

15W 12VDC

12VDC

100V - 240V

1-1/4” (32 mm)

1-1/2” (38 mm)

1-5/8” wide (41 mm) wide

3” (76 mm)

1-1/2” wide (38 mm) wide 2 -3/4” (70 mm)

3-5/16” (84 mm)

1-11/16” (43 mm)

10’ (3 m)

L-DC-ELT15WP-CON-1

10’ (3 m)

60W

L-DC-ELT6WP-CON-1

12VDC

100V - 277V

Line Voltage Input Cord with Plug

30W

Neutral (white wire) Ground (green wire) Line (black wire)

12VDC

OUTPUT 12VDC

100V - 277V

L Black

Red

N White

Black

Mounting Block

INPUT

LED Power Supply 12VDC, 30W or 60W

Line Voltage Input Cord with Plug Neutral (white wire) Ground (green wire) Line (black wire) OUTPUT 12VDC L Black

Red

N White

Black

Mounting Block

INPUT

LED Power Supply 12VDC, 30W or 60W

LED 12VDC Power Supply (30W) L-DC- SLELT30

Power Cord 8’ (2.4 m)

13/16" (20 mm)

1/2" (13 mm) 6-1/8" (155 mm)

2-1/8" (54 mm)

pply (30W)

Power Cord 8’ (2.4 m)

13/16" (20 mm)

LED 12VDC Power Supply (60W) L-DC- SLELT60

6-1/8" (155 mm) 2-1/8" (54 mm)

1" (26 mm)

15/16" (24 mm) Power Cord 8' (2.4 m)

3-7/16" (88 mm)

AMP Connector

Cord Total Length 12" (305 mm)

1/2" (13 mm)

3-7/16" 2-3/8" (88 mm)

AMP L-DC-EQ30-1 Connector

1" (26 mm)

7" (178 mm)

L-DC-EQ60-1

(61 mm)

Features: Compatible with all Tresco® low voltage dimmers

I NOT compatible with hardwire wallLength dimmers Total

Class 2

pply (60W)

Part #

Cord

15/16"

L-DC-ELT6WP-CON-1 (24 mm)

6W 12VDC Wall Mount Power Supply w/3 Snap Block

Power Cord L-DC-ELT15WP-CON-1

15W 12VDC Wall Mount Power Supply w/6 Snap Block

8' (2.4 m) L-DC-EQ30-1

L-TRANS-MNT-BL-1

2-3/8" (61 mm)

12VDC constant voltage output Short circuit protection* Overload protection*

30W 12VDC EquiLine Power Supply w/6 Snap Block

RFI Protection

60W 12VDC EquiLine (178Power mm) Supply w/6 Snap Block

Dimmable on trailing edge (12VDC side)

L-DC-EQ60-1

144

12" (305 mm)

Description

(4) Configurations: 6-60 Watt

Extra 6-Snap Mounting Block

1-800-227-1171 | trescolighting.com

Class 2 2-Year warranty *Automatic Reset (no fuses)

Power Supplies

All product dimensions and specifications are subject to change without prior notice.

12VDC Commercial Wall Dimmable Hardwire Power Supplies 30W

60W

12VDC

100V - 277V

12VDC

100V - 277V

Line Voltage Input Cord Neutral (white wire) Ground (green wire)

LED Wall Dimmer 12VDC+

Line (black wire) OUTPUT 12VDC

Features:

Red

N White

Black

Mounting Block

INPUT

Install Wall Dimmer on input (line voltage) side of Power Supply

Under 1” height

L Black

LED Power Supply 12VDC, 30W or 60W

(2) configurations: 30W or 60W 12VDC constant voltage output LED 12VDC Power Supply (30W) L-DCE30D-CON

High power factor (Pf > .95)

13/16" (20 mm) 1/2" (13 mm)

Dimmable by standard LED wall dimmers

6-1/8" (155 mm)

2-1/8" (54 mm)

Continuous smooth dimming

1" (26 mm) 3-7/16" (88 mm)

L-DCE30D-CON-1

Wire directly into unit LED 12VDC Power Supply (60W)

Electronic units are lower profile and generate less L-DCE60D-CON heat than magnetic transformers

Cord 4" (102 mm)

15/16" (24 mm)

Quiet operation Works with all Tresco® 12VDC dimmable LED fixtures

7" (178 mm)

One 6-snap mounting block included 2-3/8" (61 mm)

RFI Protection

L-DCE60D-CON-1

Class 2 with short circuit and automatic reset L-DCE60D-CON-1

Compatible with all Tresco® low voltage dimmers

Class 2

Part #

Description

L-DCE30D-CON-1

30W 12VDC Hardwire Dimmable LED Power Supply

L-DCE60D-CON-1

60W 12VDC Hardwire Dimmable LED Power Supply

L-TRANS-MNT-BL-1

Extra 6-Snap Mounting Block

SELV

Compatible with hardwired LED wall dimmers

5 YEAR

COMMERCIAL GRADE RA N T

Compatible Tresco Wall Dimmers (page 149).

Dimmable by LED compatible line voltage (120V) wall dimmers. Mounting block included. Requires electrician to install.

1-800-227-1171 | trescolighting.com

145

Power Supplies

All product dimensions and specifications are subject to change without prior notice.

12VDC Industrial Wall Dimmable Hardwire Power Supplies (3x 60W output)

(1x 60W output)

180W

12VDC

100V - 277V

LED Power Supply

LED Wall Dimmer

Black Red

Neutral (white wire) Ground (green wire)

e (black wire)

Black Red

Line Voltage Input Cord

AC L Black AC N White Green

LED Wall Dimmer

12VDC 60Wx3, or 24VDC 96Wx3

Black Red

een wire)

AC L Black AC N White Green

12VDC 60Wx1, or 24VDC 96Wx1

Cord

12VDC

100V - 277V

Black Red

60W

Line (black wire)

Install Wall Dimmer on input (line voltage) side of Power Supply

10-15/16" 278 mm

7-3/8" (188 mm) LED 12VDC Power Supply (60Wx3) L-12DCH60X3

1-3/4" (45 mm)

1-11/16" (43 mm) 4-1/4" (108 mm)

3-5/8" (92 mm)

11-15/16" (303 mm)

8-11/16" L-12DCH60X1-1 (220 mm)

SELV

COMMERCIAL GRADE

LED 24VDC Power Supply (96Wx3) AR TY L-24DCH96X3

Class 2

5 YEAR

RA N

1-3/4" (45 mm)

1-11/16" (43 mm)

Features: Slim design, under 2” height

Compatible with all Tresco® low voltage dimmers

(2) configurations: 60W or 180W 12VDC constant voltage output High power factor (Pf > .95) 3-11/16"

L-12DCH60X3-1

Compatible with hardwired LED wall dimmers 4-1/4" (108 mm)

(93 compartment mm) Built-in hardwire

Part #

Description

All metal construction

L-12DCH60X1-1*

60W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply

L-12DCH60X3-1*

180W 12VDC Commercial/Industrial Metal Hardwire Dimmable Power Supply

L-TRANS-MNT-BL-1

Extra 6-Snap Mounting Block

Short circuit protection* Overcurrent protection Overload protection*

* Does not include 6-snap mounting block

RFI protection

Dimmable by LED line voltage (120V) wall dimmers. Mounting block not included

Dimmable by standard LED wall dimmers

Requires electrician to install.

Compatible Tresco Wall Dimmers (page 149).

Class 2 * Automatic reset (no fuses)

146

1-800-227-1171 | trescolighting.com

Power Supplies

All product dimensions and specifications are subject to change without prior notice.

24VDC Commercial Plug-in Power Supplies 48W

96W

24VDC

100V - 240V

24VDC

100V - 240V

Mounting Block

Hole Size, if Needed:

5/8 in. 16 mm

6 ft. 1.8 m

1/2 in. 13 mm

6 in. 152 mm

6” (152 mm)

5 YEAR

Class 2

COMMERCIAL GRADE W

RA N T

Features:

Slim design, under 1.6” height

3-5/16 in. 84 mm

13” (330 mm)

High power factor (Pf > .95) 96W only (5) barrel output (included)

6 in.

6-1/4” (159 mm) 7-1/16” (179 mm)

8’ 3-3/4 in. (2.45 m) 95 mm

1-5/8” (41 mm) 2-5/16” (59 mm)

2-3/8” (60 mm)

L-24DCELT48-BL-1

Overcurrent protection

1 in. 25 mm

1-1/16 in. 27 mm

Short circuit protection*

3/4 in. 19 mm

L-24DCELT96-1

1-5/8 in. 41 mm

Compatible with all Tresco low voltage dimmers NOT compatible with hardwire wall dimmers

Overload protection* RFI protection

Part #

Description

Dimmable on trailing edge (24VDC side)

L-24DCELT48-BL-1

48W 24VDC Power Supply w/ 5 Barrel Out - Black

Class 2

L-24DCELT96-1

96W 24VDC Power Supply w/ 5 Barrel Out - White

L-1BRL5-1

Extra 5 Output Barrel Splice

* Automatic reset (no fuses) Economy Series

13” (330 mm)

1-5/16” 152 mm (34 mm)

1-1/2” (38 mm)

24VDC constant voltage output

6” (152 mm)

Hole Size, if Needed:

24VDC EquiLine Plug-in Power Supply

15W

24VDC

100V - 240V

Features: 1-1/4” (32 mm)

24VDC constant voltage output Fully enclosed wall mount plastic case Single barrel connector output

1-5/8” wide (41 mm) wide

3” (76 mm)

Short circuit protection* Overcurrent protection Overload protection* RFI protection Dimmable on trailing edge (24VDC side) Class 2 2-Year warranty

10’ (3 m) *Automatic Reset (no fuses)

Class 2

Part #

Description

L-24DCELT15WP-1

15W 24VDC Wall Mount Power Supply w/ barrel connector

L-1BRL5-1

Extra 5 Output Barrel Splice

1-800-227-1171 | trescolighting.com

Compatible with all Tresco low voltage dimmers NOT compatible with hardwire wall dimmers

147

Power Supplies

All product dimensions and specifications are subject to change without prior notice.

24VDC Industrial Wall Dimmable Hardwire Power Supplies (1x 96W output) 96W

(3x 96W output)

24VDC

288W 24VDC

100V - 277V

LED Power Supply

Black Red

LED Wall Dimmer

Line (black wire)

Black Red

LED Wall Dimmer

Black Red

Neutral (white wire) Ground (green wire)

AC L Black AC N White Green

white wire) Ground (green wire)

AC L Black AC N White Green

Line Voltage Input Cord

12VDC 60Wx1, or 24VDC 96Wx1

ge Input Cord

Black Red

12VDC 60Wx3, or 24VDC 96Wx3

LED Power Supply

Line (black wire)

Install Wall Dimmer on input (line voltage) side of Power Supply

10-15/16" 278 mm

7-3/8" (188 mm)

LED 12VDC Power Supply (60Wx3) L-12DCH60X3 1-11/16" (43 mm)

1-3/4" (45 mm) 4-1/4" (108 mm)

3-5/8" (92 mm)

11-15/16" (303 mm)

8-11/16" (220 mm)

LED 24VDC Power Supply (96Wx3) L-24DCH96X3

3-11/16" (93 mm)

1-3/4" (45 mm)

1-11/16" (43 mm)

L-24DCH96X3-1

4-1/4" (108 mm)

L-24DCH96X1-1

5 YEAR

COMMERCIAL GRADE AR

SELV

Class 2

Features:

RA N T

Slim design, under 2” height 24VDC constant voltage output

Compatible with all Tresco® low voltage dimmers

High power factor (Pf>.95)

Compatible with hardwired LED wall dimmers

Built-in hardwire compartment All metal construction

Part #

Description

Short circuit protection*

L-24DCH96X1-1*

24VDC 96W Commercial/Industrial Metal Hardwire Dimmable Power Supply

L-24DCH96X3-1*

24VDC 288W Commercial/Industrial Metal Hardwire Dimmable Power Supply

L-1BRL5-1

Extra 5 Output Barrel Splice

Overcurrent protection Overload protection* RFI protection Dimmable by standard LED wall dimmers Class 2 * Automatic reset (no fuses)

148

*Does not include 5 Output Barrel. Dimmable by LED line voltage (120V) wall dimmers. Mounting block not included Requires electrician to install.

1-800-227-1171 | trescolighting.com

Compatible Tresco Wall Dimmers (page 149).

Power Supplies

All product dimensions and specifications are subject to change without prior notice.

120V LED Wall Dimmers 120V Lutron Diva® C•L™ Dimmer

Lutron Skylark Contour C•L™ Dimmer

150W

Leviton Decora® 300W LED Dimmer

300W

Lutron Diva® C•L™ Dimmer 150W

Leviton Decora® 300W

Large paddle switch with a captive linear-slide dimmer for a standard designer wall plate opening

Switch returns light to preset light level

Packaged with White, Ivory, and Light Almond color change kits

Offers more reliable dimming performance over standard dimmers

Switch returns light to preset light level

HEDTM technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs Adjustment switch to modify the minimum light level in order to maximize the dimming range if flickering occurs at lower dimming levels

No neutral wire required for installation Adjustment switch to modify the minimum light level in order to maximize the dimming range if flickering occurs at lower dimming levels

Lutron Skylark Contour C•L™ Dimmer 150W On/off rocker switch with a captive linear-slide dimmer for a standard designer wallplate opening Switch returns light to preset light level Offers more reliable dimming performance over standard dimmers HED™ technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs Low-end adjustment dial Part #

Description

L-DVCL-153P-WH-1

Lutron Diva® 150W C•L™ Dimmer w/out plate

L-CTCL-153P-WH-1

Lutron Skylark Contour C•L™ 150W Dimmer w/out plate

L-DSL06-1LZ-1

Leviton® Decora® 300W LED Dimmer w/WH-IV-LA Kit

1-800-227-1171 | trescolighting.com

Compatible with Tresco 12VDC and 24VDC Wall Dimmable Power Supplies (previous pages)

149

All product dimensions and specifications are subject to change without prior notice.

Controllers Single color control

Receiver Speciﬁcations:

Remote Speciﬁcations:

P/N: L-WLD-1REC P/N: L-WLD-3RMT-BL FREEDiM Series Universal Receiver Input Voltage: 12VDC Operating Voltage: 3V CR2032

2-Zone Rem InstallationFreeDim Instructions FREEDiM 3-Zone Remote Dimmer

12VDC

24V DC

Output Voltage: 12V DC Max-Output Load: 5A, 60W Dimming Range: 100% - 1% 60W Capacity (12VDC); 96W Capacity (24VDC)

Working Frequency: 915 MHz Features:

12VDC 60W Capacity

RF Remote Distance: 20 m (65 ft.)

Power failure memory

READ ALL INSTRUCTIONS BEFORE INSTALLING SYSTEM.

Before beginning besingle sure power turned OFF to light system. Multiple receivers caninstallation, be used in a powerissupply PROGRAMMING or within a room to achieve multiple zones of control Perform this exercise BEFORE permanently installing your system

1. Disconnect Mounting Block from 12V DC Tresco power supply. Connect Simple one button pairing with dimmers Receiver to Tresco power supply by locating the input wire to the receiver and snapping the male AMP connector to female AMP connector located on output wire of the power supply Compatible with all(See Figure 2). LED Fixture To use multiple receivers on one power supply, connect the input wire of the single color FREEDiM Mounting Block to the power supply output and then plug the receivers into the Mounting Block. Series controllers

Indicator Light

Figure 1 All lights: ON/UP

All lights: OFF/DOWN

Zone 1: ON/UP Zone 2: ON/UP

Zone 1: OFF/DOWN

Zone 2: ON/UP

Mounting Block Zone 2: OFF/DOWN

5 150mm

2. Remove the plastic pull-tab from the battery compartment on the back of the remote.

3 97mm

Zone 3: OFF/DOWN S1

Hold to save the scene, click to call up the saved

3. Plug desired 12V DC LED lights into the Mounting Block(s). 4. Plug polarized 2-prong end of Tresco 12V DC power supply wire into 120V plugging power supply in.

Universal FREEDiM Series Receiver

5. Power on the 3-Zone Remote Dimmer. L-WLD-1REC-1 6. In order for each Receiver to know what Zone it belongs to, you will need to “pair” it to the zone you wish to use: press (do not hold) the Learning Key on the Deco Wall Dimmers

1 ” 39mm

Figure 2

the corresponding Zone (#’s 1-3) you wish to use (See Figure 1). Connected LED

1 ½” 13mm

Power Supply

1 ½” 13mm

7. Repeat step 6 with any additional Receivers or Remotes that you want programmed. programmed to an unlimited amount of Receivers.

Dimmer Receiver

Mounting Block

Universal 12VDC Power Supply

CLEARING A RECEIVER MEMORY With Remote/Lights turned On, hold down the Learning Button on the Receiver until the Mirco Dimmers

Female AMP® Connector

Figure 3

Male AMP® Connector

tW ire

SETTING A SCENE Set all Zones to the desired light level. Hold down the desired Scene Save Button (#’s S1 - S6)

” 16mm

4” (102 mm)

IMPORTANT SAFETY INSTRUCTIONS

W ire

CAUTION: To reduce the risk of ﬁre, electric shock, or injury to persons:

Inp

• Route and secure cords so they will not be pinched or damaged when the cabinet is pushed to the wall. 3 Zone Remote • Use only insulated staples or plastic ties to secure ALL loose cords. • 12VDC Class 2 or LPS power supply only • Max 60W 12VDC 5AMP output

7/8” (22 mm)

Part #• Use only in dry locations. NotDescription for use where exposed to the weather L-WLD-1REC-1

12/24VDC FREEDiM Series Receiver

A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers • All wiring must follow NEC regulations.

1-800-227-1171 | trescolighting.com 150 Save these instructions for future reference

For technical assistance: 1-800-227-1171

3-1/4” (82.5 mm) 1-3/8” (35 mm)

L-WLD-1REC-1 Learning Key

Tresco Lighting by Rev-A-Shelf 12400 Earl Jones Way Louisville, KY 40299 Tel: 800-227-1171

Single Color Controllers

All product dimensions and specifications are subject to change without prior notice.

PATENT NO. 9,818,559 B2

FREEDiM Series Deco Wall Dimmer Features: Available in single and 2-zone Can be programmed to multiple receivers for more lighting control Black, white, or light almond finish Fits Decora® style wall plates 65 ft. range of control from dimmer to receiver Controls all Tresco® 12/24VDC dimmable low voltage lights Unlike traditional hardwire dimmers, you can control the same set of lights from multiple Deco Wall Dimmers Battery Compartment (CR1625/1620)

Also available in 2-Zone:

Easily remove switch from docking tray to replace batteries or use as a remote dimmer

FreeDim Wall Dimmer

Housing

Front

Can be mounted to standard wall electrical boxes or to drywall 4” (103 mm)

2-7/16” (61 mm)

Part #

Description

L-WLD-1WAL-**-1

FREEDiM Series Deco Wall Dimmer

L-WLD-2WAL-**-1

FREEDiM Series Two-Zone Deco Wall Dimmer

L-WLD-1REC-1

12/24VDC FREEDiM Series Receiver

1” (27 mm)

**Insert BL for Black (only available in single zone), WH for White, LA for Light Almond A single dimmer can be programmed to up to 10 different receivers.

Must have at least one receiver (L-WLD-1REC-1) to operate

9/16” (13 mm)

1-5/16” (33 mm) 9/16” (13 mm)

A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers

1-800-227-1171 | trescolighting.com

151

Single Color Controllers

All product dimensions and specifications are subject to change without prior notice.

FREEDiM Series Wireless Controllers FREEDiM Series Micro Dimmer 21/32” (16.67 mm)

Features: Single zone wireless dimmer Black or Nickel finish

1-29/32” (48.5 mm)

Easy to replace, long life lithium battery 65 ft. (20 m) range of control from dimmer to receiver Controls all Tresco® 12VDC/24VDC dimmable low voltage lights Recess or surface mount 21/32” (16.67 mm)

Mounting Case

Integrated Magnet

1-29/32” (48.5 mm)

Battery Compartment (CR2025) 21/32” (16.67 mm)

Alignment Notch

Mounting Case

Integrated magnet allows for mounting to refrigerator or other metallic surfaces 1-29/32” (48.5 mm)

1-21/32" (42 mm) hole

21/32” (16.67 mm)

Mounting Case

1-29/32” (48.5 mm)

Easy 2 screw installation Alignment Notch

21/32” (16.67 mm)

Part #

Description

L-WLD-1RND-BL-1

FREEDiM Series Micro Dimmer, Black

L-WLD-1RND-NI-1

FREEDiM Series Micro Dimmer, Nickel

L-WLD-1REC-1

12/24VDC FREEDiM Series Receiver

Alignment Notch

1-29/32” (48.5 mm)

Surface Mount

1-21/32" (42 mm) hole

Recess Mount

A single dimmer can be programmed to up to 10 different receivers.

1-21/32" Must have at least one receiver (L-WLD-1REC-1) to operate (42 mm)

hole A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers Must purchase 12VDC to 24VDC Controller Adaptor Cord Set for 24VDC LED fixtures.

152

1-800-227-1171 | trescolighting.com

Mounting Case

Alignment Notch

Single Color Controllers

All product dimensions and specifications are subject to change without prior notice.

FREEDiM Series 3 Zone Remote Features: Independent control of 3 lighting zones from single remote Program additional receivers to separate the lighting in a room into multiple zones that you can control independently Set brightness levels of all of the zones to a desired level then save as a “scene” 65 ft. (20 m) range of control from remote to receiver Controls all Tresco® 12/24VDC dimmable low voltage lights

FREEDiM 3-Zone R Integrated magnet allows for mounting to refrigerator or other metallic surfaces.

3-Zone (CR2032 Battery) Battery Compartment (CR2032 Battery)

Docking tray can be screw mounted. Remotes attach to tray magnetically.

5-15/16” (150 mm)

1-9/16”

3 (97mm)

1/2”

(39 mm) (13 mm) Part #

Description

L-WLD-3RMT-BL-1

FREEDiM Series 3-Zone remote, Black

L-WLD-1REC-1

12/24VDC FREEDiM Series Receiver

1/2” (13 mm)

” (16 mm)

Must have at least one receiver (L-WLD-1REC-1) to operate A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers

1-800-227-1171 | trescolighting.com

153

Single Color Controllers

All product dimensions and specifications are subject to change without prior notice.

Wireless Door Sensor Receiver Features:

24V DC

2-Zone Re InstallationFreeDim Instructions FREEDiM 3-Zone Remote Dimmer

Receiver Speciﬁcations:

Remote Speciﬁcations:

12VDC

P/N: L-WLD-1REC P/N: L-WLD-3RMT-BL Input capacity Voltage: 12VDC 60W capacity (12VDC); 96W (24VDC) Operating Voltage: 3V CR2032 Output Voltage: 12V DC Working Frequency: 915 MHz Max-Output Load: 5A, 60W Power failure RF Remote Distance: 20 mmemory (65 ft.) Dimming Range: 100% - 1%

12VDC 60W Capacity

Install inline between power supply and lights

Simple one button pairingBEFORE with Wireless Door Sensors READ ALL INSTRUCTIONS INSTALLING SYSTEM. Before beginning installation, be sure power is turned OFF to light system.

Single receiver can be programmed with up to (4) sensors

PROGRAMMING

for up to 4 doors to control the same light fixutres.) Perform(Allows this exercise BEFORE permanently installing your system

Indicator Light

Figure 1 All lights: ON/UP

1. Disconnect Mounting Block from 12V DC Tresco power supply. Connect Receiver to Tresco power supply by locating the input wire to the receiver and snapping the male AMP connector to female AMP connector located on output wire of the power supply (See Figure 2). To use multiple receivers on one power supply, connect the input wire of the Mounting Block to the power supply output and then plug the receivers into the Mounting Block.

All lights: OFF/DOWN

Zone 1: ON/UP

Zone 1: OFF/DOWN

Zone 2: ON/UP

Zone 2: OFF/DOWN

Zone 2: ON/UP

5 150mm

2. Remove the plastic pull-tab from the battery compartment on the back of the remote.

3 97mm

Zone 3: OFF/DOWN S1

Hold to save the scene, click to call up the saved

3. Plug desired 12V DC LED lights into the Mounting Block(s). 4. Plug polarized 2-prong end of Tresco 12V DC power supply wire into 120V

Mounting Block

12VDC LED Fixture

plugging power supply in. 5. Power on the 3-Zone Remote Dimmer. 6. In order for each Receiver to know what Zone it belongs to, you will need to “pair” it to the zone you wish to use: press (do not hold) the Learning Key on the

1 ” 39mm

Figure 2

the corresponding Zone (#’s 1-3) you wish to use (See Figure 1). Connected LED

1 ½” 13mm

Power Supply

1 ½” 13mm

7. Repeat step 6 with anyDoor additional Receivers or Remotes that you want Wireless Sensor Receiver programmed.

” 16mm

L-WLDSREC-1

programmed to an unlimited amount of Receivers.

Dimmer Receiver

Mounting Block

CLEARING A RECEIVER MEMORY With Remote/Lights turned On, hold down the Learning Button on the Receiver until the SETTING A SCENE Set all Zones to the desired light level. Hold down the desired Scene Save Button (#’s S1 - S6)

Female AMP® Connector

Figure 3

Male AMP® Connector pu t

W ire

Universal 12VDC Power Supply O

IMPORTANT SAFETY INSTRUCTIONS

Inp ut W ire

CAUTION: To reduce the risk of ﬁre, electric shock, or injury to persons:

4” (102 mm)

• Route and secure cords so they will not be pinched or damaged when the cabinet is pushed to the wall. • Use only insulated staples or plastic ties to secure ALL loose cords. • 12VDC Class 2 or LPS power supply only

7/8” (22 mm)

• Max 60W 12VDC 5AMP output

3-1/4” (82.5 mm)

Part # Description • Use only in dry locations. Not for use where exposed to the weather L-WLDSREC-1

12/24VDC Wireless Door Sensor Receiver

1-3/8” (35 mm)

Single receiver can be programmed with up to 4 door sensors.

Learning Key

• All wiring must follow NEC regulations.

Save these instructions for future reference 1-800-227-1171 | trescolighting.com 154 For technical assistance: 1-800-227-1171

Tresco Lighting by Rev-A-Shelf 12400 Earl Jones Way Louisville, KY 40299 Tel: 800-227-1171 Fax: 502-491-2215

Single Color Controllers

All product dimensions and specifications are subject to change without prior notice.

Wireless Door Sensor Features:

Allows light to be controlled by multiple doors Black or Nickel Simple push-button pairing with receiver (sold separately) Program up to (4) sensors to a single L-WLDSREC-1 receiver No cumbersome, messy wires to have to hide inside your cabinetry Mounting hardware (included)

Long-lasting CR2025 battery

Activated by a magnet; simply adhere to the inside of cabinet door with included double-stick adhesive

Housing Bottom

SensorTop

Signal Light Sensor Button

(2) screw holes for mounting

NOTE: The Sensor Button should always be pointed toward you when mounted.

Indexed tabs properly align top and bottom sections

Comes with (3) stick-on magnet covers in black, brown and white

Part #

Description

L-WLDS-BL-1

FREEDiM Black Wireless Door Sensor

L-WLDS-NI-1

FREEDiM Nickel Wireless Door Sensor

5/8” (15 mm)

1-13/16” (36 mm)

Must have at least one receiver (L-WLDSREC-1) to operate

1-800-227-1171 | trescolighting.com

1-13/16 (36 mm)

155

Tunable Controllers

All product dimensions and specifications are subject to change without prior notice.

RGB-CCT Controller/Receivers

12VDC 24V DC

White Tunable

RGB Tunable

Features: 60W capacity (12VDC); 96W capacity (24VDC) Digital user interface Power failure memory Simple one-button programming of FREEDiM Series wireless controls Compatible Tresco® FREEDiM series RGB or CCT hand and wall controllers (sold separately) Works with any 12/24VDC Tresco® RGB or CCT low voltage lights Complete with pigtails for RGB or CCT connection Tuning of the RGB or Color temperature from 2700K-6500K Parent Controller/Receiver L-RGBCCT1-PREC-1

CCT Connection Child Controller/Receive L-RGBCCT1-CREC-1

RGB Connection 1-13/16” (46 mm)

LED Receiver for RGB & CCT

5/8” (16 mm)

L-RGBCCT1-CREC-1

Display in RGB mode. RGB values can be tuned in increments of 1

Display in CCT mode. CCT values can be tuned in increments of 15-16K (Color tempature is range)

1-13/16” (46 mm)

5/8” (16 mm) 5-3/4” (146 mm)

Part #

Description

L-RGBCCT1-PREC-1

12VDC/24VDC RGB-CCT Parent Contoller/Receiver

L-RGBCCT1-CREC-1

12VDC/24VDC RGB-CCT Child Contoller/Receiver

156

5-3/4” (146 mm)

1-800-227-1171 | trescolighting.com

L-RGBCCT1-PREC-1

Tunable Controllers

All product dimensions and specifications are subject to change without prior notice.

12VDC Setup

24VDC Setup

Parent Controller/Receiver

Child Controller/Receiver (One parent can be paired up to 10 Child Receivers)

Wireless remote controls 1 parent per zone and 10 child receivers per parent

RGB-CCT Wall Controllers

White Tunable

RGB Tunable

PATENT NO. 9,818,559 B2

(2) configurations: RGB or CCT (White tunable) Can be programmed with up to (1) parent and (10) child receivers Fits Decora® style wall plates 65 ft. (19 m) range of control from dimmer to receiver Controls all Tresco RGB or CCT low voltage lights RGB/CCT receivers required (sold separately) Long-lasting CR1625/1620 battery (included) RGB

Easy touch Red, Green, Blue and on/off/dimming controls CCT – White tunable Easy touch warm 2700K to daylight 6500K and on/off/dimming controls

Part #

Description

L-WLD-CCT-WH-1

CCT FREEDiM Deco Wall Dimmer White

L-WLD-RGB-WH-1

RGB FREEDiM Deco Wall Dimmer White

1-800-227-1171 | trescolighting.com

157

Tunable Controllers

All product dimensions and specifications are subject to change without prior notice.

RGB-CCT Wireless Remote

White Tunable

RGB Tunable

Features: Intuitive and ergonomic design Can control RGB and CCT Touch control for color mixing Quick set buttons for common CCT and static RGB values Program up to (2) separate zones and control independently (10) preset RGB sequences with speed control (i.e. fade in, fade out)

"On" Indicator Light

CCT Slider (for CCT control, slide with finger touch) RGB Color Wheel (for RGB control, rotate with finger touch) "On/Off" Button

Home Button (Takes any setting back to start)

Dim Button Speed-Up Button (Increases speed of RGB program)

Quick RGB Preset Buttons Play Button (Starts the pre-set program)

Speed-Down Button (Decreases speed of RGB program)

Quick CCT Preset Buttons

Zone 1 and Zone 2 Buttons (Switch between Zone 1 and Zone 2)

5-17/32” (140.5 mm)

3000K

3500K

Zone 1 Indicator Light

Switch Mode (Switch between RGB and CCT Modes)

RGB Indicator Light

5000K

Part #

Description

L-RGBCCT-RMT-1

RGB-CCT Wireless Hand Remote

A single remote can control 1 parent and 10 child receivers per zone 1-23/32” (44 mm)

158

1-800-227-1171 | trescolighting.com

Zone 2 Indicator Light

Single Color Controllers

All product dimensions and specifications are subject to change without prior notice.

12VDC

Wireless Remote Control Dimmers

24V DC

Remote Control LED Dimmers feature radio-frequency, remote-control dimming to adjust lights from anywhere in the room up to 30' (9 m). The remote control provides on/off power and dims lights from 100%-1%.

Universal Remote Dimmer

Dedicated Remote Control Dimmer

Features a built-in memory that recalls the last setting when turned on

Features 1-5/16” a built-in memory that recalls the last setting when turned on

Comes with two remote controls (one as a backup)

Comes with two remote controls (one extra, as a backup) that are synchronized to control the same dimmer

Controls up to 12VDC/60W or 24VDC/96W of LED lighting

2-1/8” (54 mm)

No line of sight required

3-3/16” (81 mm)

Can control multiple dimmers in same room with single remote control for universal dimming 1-1/8” (29 mm)

Dims lights from 100%-1%

Controls up to 12VDC/60W or 24VDC/96W of LED lighting (33 mm)

No line of sight required

Can use multiple independently controlled dimmers in the same room 2-1/4” lights from 100%-1% Dims (57 mm)

1-5/16” (33 mm) 3-3/16” (81 mm) 2-1/8” (54 mm)

•+ •–

+• –•

INPUT

OUTPUT

1-1/8” (29 mm)

Part #

Description

L-LED-DIMRMT-12V8A-1

LED Dedicated Remote Control Dimmer, 12/24VDC

L-LED-DIMRMT-12V8A-U-1*

LED Universal Remote Control Dimmer, 12/24VDC

L-24VDC3INADP-WH-1

12VDC to 24VDC Controller Adaptor Cord Set White

L-24VDC3INADP-BL-1

12VDC to 24VDC Controller Adaptor Cord Set Black

2-1/4” (57 mm)

Adaptor Cord Set required for 24VDC operation. *Recommended not to exceed 3 per room Placement of multiple dimmers in a room may be critical for proper function depending on set-up and obstacles.

1-800-227-1171 | trescolighting.com

159

Wired Controllers

All product dimensions and specifications are subject to change without prior notice.

Oval Controllers

12VDC

Door Sensor Controller

Motion Controller

Max wattage: 60W Sensor range: 1/4" - 2" (6 mm - 50 mm) Cable input: 79" (2 m) Cable output: 6" (152 mm) Finish: Black/Nickel

Max wattage: 60W Sensor range: 0-5’ (1500 mm) Viewing degree: 100° Time on: 30 secs if no motion Cable input: 79” (2 m) Cable output: 6” (152 mm) Finish: Black/Nickel

Door open, light on; door closed, light off

Turns on when human motion is detected

) di

a. ) di

2” (

3 17/

m 3m

” (1

32 17/

. dia

) mm

dia

) di

. dia

32 17/

” (1

m 3m

a. ) di

2” (

3 17/

m ) m ) m m 61 (61 61 mm mm 8a” .( ” (13 m /8” a. ” (13 8”a( . ” (13 / / / 3 3 3 i 2 ) di /32 2 ) d /32 2-3 2- ) di 7/32 ) ) ) ) 7 7 m m m m m 1 m 1 m 1 m m mDoor 3m 1m 1m 3m Sensor (13 61 13 Dimmer Controller ” (1 ” (6 ” (6 ” (1 Controller 8” (61 Door ” (Sensor Motion Controller Dimme 2 8” ( Proximity 8 8 2 32” 2 Controller / / / 3 / 3 3 / / ) 3 ) 3 ) 3 / 7 Controller 1 0-100% dimming m 2control m 2m 217 Turns on when Touch on/off and 17 hand across mm) 2-3 17/ Open - light on; human Touch on/ m m m Door Swipe 1 1 61 61 ” (6 Motion motion/8is” (detected 0-100% d ” (6 8” ( Door Closed3/-8light off / 8 to turn on/off / 3 3 Motion Dimmer -3 Door Sensor Controller 2Max wattage: 60W 2- Proximity Controller Diameter: 13mm (17/32”) Controller Diameter: ControllerController Diameter:213mm (17/32”) Diameter: 213mm (17/32”) Turns on when human on/off and Open - light on; Length: 60 mm (2 3/8”) Length: 60 mmTouch (2 3/8”) Length: 60 Dimmer Cable input: 79” (2 m) Swipe hand across Length: 60 mmDoor (2 3/8”) motion is detected Dimmer 0-100% dimming control Motion Controller Controller Closed - light off Max Proximity Controller Door SensorDoor Controller to turn on/off Max Wattage: 27W Max Watta Wattage: 27W Controller MaxOpen Wattage: Cable output: (152across mm) 13mm (17/32”) 13mm (17/32”) Turns range: on when Touch on/off and0Diameter: Diameter: 13mm (17/32”) Door - light27W on; Swipe6”hand Sensor range: - 1500 mm Cable inp Diameter: 13mm (17/32”) Sensor 0 - human 80Diameter: mm (3 1/8”) Sensor range: 0Length: - off 80 mm 1/8”) Length: 60 mm (2 3/8”) Length: motion is detected 0-100% dimming control 60 (3 mm (2 3/8”) Cable Finish: Black/Nickel Door Closed - light Viewing degree: 100º 60 mm (2 3/8”) Cable out to turn on/off Length: 60 mm (2 3/8”) input: 2.0 m (79”) Cable input: 2.0Max m (79”) Max 27W Diameter: Max Wattage: Diameter: 13mm 13mm (17/32”) Wattage: 27W Time on: 30 secs if no motion27W Finish: Nic Cable output: 152.0(17/32”) mmWattage: (6”) Diameter: (17/32”) * Hold finger down13mm for dimming Max Wattage: 27W Diameter: 13mm (17/32”) mm input: 2.0 m (79”) *Hold fing Cable output: (6”)0 - 80 mmFinish: Length: 60 mm (2Sensor 3/8”) range: 0 - 1500 Length: 60 mm 2.0 (2Cable 3/8”) Sensor range: (3 1/8”) Length: 60 mm (2152.0 3/8”)mm Cable input: m (79”) Nickel / Black Length: 60 mm (2 3/8”) Sensor range: 0 - 80 mm (3 1/8”) Cablemm output: Wattage: 27W Cable input: 2.0 m (79”) Max Wattage: 27WViewing degree: 100ºMaxCable Finish: Nickel27W / Black Max Wattage: output: 152.0 (6”) 152.0 mm (6”) Max Wattage: 27W Cable input: 2.0 m (79”) Time mm on: 30 secs if noCable motion Finish: Nickel / Black Sensor range: 0 - 1500 input: 2.0 m (79”) Cable Sensor range: 0 - 80 mmoutput: (3 1/8”)152.0 mm (6”) Finish: Nickel / Black Sensor range: 0 -Cable 80 mm (3 1/8”) output: 152.0 mm Cable input: 2.0 m (79”) *Hold Viewing degree: 100º Cable output: 152.0 mmfinger (6”) down for dimming Cable(6”) input: 2.0 mFinish: (79”) Nickel / Black Cable input: 2.0 m (79”)Nickel / Black Cable output: 152.0 mm (6”) Finish: output: 152.0 mm (6”)Nickel / Black Time on: 30 secs ifCable no motion Finish: Cable output: 152.0 mm (6”) Cable input: 2.0 mFinish: (79”) Nickel / Black *Hold finger down for dimming Finish: Nickel / Black Finish: Nickel / Black Cable output: 152.0 mm (6”) m

a. ” (1 ) di17/32 m m

Part #

Description

L-LED-OVLTD-**-1

60W 12VDC Oval Recess/Surface Mnt. Touch Dimmer

L-LED-OVLDS-**-1

60W 12VDC Oval Recess/Surface Mnt. Door Sensor

L-LED-OVLMS-**-1

60W 12VDC Oval Recess/Surface Mnt. Motion Sensor

L-DB1732-1

17/32" (13.5 mm) Drill Bit for Recess Mount

Finish: Nickel / Black

**Available in Black (BL) and Nickel (NI) Surface mount plate packaged with each controller.

160

1-800-227-1171 | trescolighting.com

Wired Controllers

All product dimensions and specifications are subject to change without prior notice.

Profile Controllers

12VDC 24V DC IN MADE THE USA

(5) profiles to choose from – angled, curved, recessed, round or square Capacity: 12VDC/60W; 24VDC/96W (2) configurations: Touch Dimmer and Touch Dimmer/Motion Combo Power failure memory (retains last setting) 79” (2 m) input and 3” (76 mm) output Controls all Tresco® dimmable low voltage lights Various finishes available

Recessed Groove 5” (127 mm)

Square, Round Angled, Curved 3-29/32” (99 mm)

Touch Dimmer Controller

Touch Dimmer and Motion Controller Combo

Touch ON/OFF

Premium Panasonic motion sensor

Gradual dimming from 100%-5%

Touch dimmer function 100/75/50/25/Off

Power failure memory (retains last setting)

(3) time settings: 30 seconds, 3 minutes, 30 minutes or customization available

10-hour automatic energy-saving shutoff

Recessed 5-1/8” (130 mm)

Motion sensor can be bypassed Dimming function works in motion sensor mode or stand-alone mode 10-hour automatic energy-saving shut off in dimmer only mode *Motion sensor time can be customized by Tresco® Part #

Description

L-XSQRDIMA-XX-1

Dimmer Module for Square Profile

L-XCRVDIMA-XX-1

Dimmer Module for Curved Profile

L-XANGDIMA-XX-1

Dimmer Module for Angled Profile

L-XRNDDIMA-XX-1

Dimmer Module for Round Profile

L-XRECDIMA-XX-1

Dimmer Module for Recessed Profile

L-XSQRCBOYY-XX-1

Dimmer/Motion Sensor Combo for Square Profile

L-XCRVCBOYY-XX-1

Dimmer/Motion Sensor Combo for Curved Profile

L-XANGCBOYY-XX-1

Dimmer/Motion Sensor Combo for Angled Profile

L-XRNDCBOYY-XX-1

Dimmer/Motion Sensor Combo for Round Profile

L-XRECCBOYY-XX-1

Dimmer/Motion Sensor Combo for Recessed Profile

Mounting: (Mounting accessories are dependent upon the profile) Square/Curved: Magnet mount (magnet already built-in) with metal plate and u-clips Round: U-Clips Angled: Screw-in Recessed: Route a channel in wood 21/64” (8.33 mm) minimum depth x .75” (19 mm) width x 5” (127 mm) length and pressure fit this extrusion in place.

All controllers are 3-15/16” (100 mm) in length except recessed profiles which are 5-1/8” (130 mm) XX= Insert SC for Satin Clear, BL for Black, WH for White, DC for Dark Cherry, NSM for Natural Soft Maple Round and recessed profiles only available in Satin Clear and Black 30 second, 3 minute, and 30 minute versions of Dimmer/Motion Sensor Combo available. YY = 30S (30 second), 3M (3 minute) or 30M (30 minute)

1-800-227-1171 | trescolighting.com

161

Wired Controllers

All product dimensions and specifications are subject to change without prior notice.

Manual In-Line Rotary Dimmer

12VDC 24V DC OFF

1-1/4”

Features:

(32 mm)

Capacity: 12VDC/48W; 24VDC/96W

100-0% dimming and on/off power 79" (2 m) input lead and 8" (203 mm) output lead (2) screws for mounting

79” (2 m)

OFF

8” (203 mm)

5/16” (8 mm) 1” (25 mm) 8” (203 mm)

79” (2 m)

2-1/2” (64 mm)

OFF

1-1/4”

(32 mm)

Part #

Description

L-LED-DIMCON-BL-1

LED Black Inline Rotary Dimmer, 12VDC/24VDC

L-LED-DIMCON-WH-1

LED White Inline Rotary Dimmer, 12VDC/24VDC

L-24VDC3INADP-BL-1

12VDC to 24VDC Controller Adaptor Cord Set Black

L-24VDC3INADP-WH-1

12VDC to 24VDC Controller Adaptor Cord Set White

Adaptor Cord Set required for 24VDC operation.

162

OFF

8” (203 mm) 1-800-227-1171 | trescolighting.com

79” (2 m)

Wired Controllers

All product dimensions and specifications are subject to change without prior notice.

Round Switch

08. Rd Sw - 1

12VDC +3

3/31/08

24V DC

Capacity: 12VDC/60W; 24VDC/96W

Front View

7/8” (23 mm)

08. Rd Sw - 1

3/31/08

Available in

ALL New by LL 1/23/09, based on IL#9 Black and Update caption to “Power Supply” for LEDWhite Spec Book 111

3/4” (19 mm)

7/8” (23 mm)

5/8” (17 mm)

Part #

6” (152 mm)

17c. Touch On/Off Switch TS2-72 Description

Hole size required - 19mm (3/4 in)

L-RDSW-1M-BL-1

Hole Diam. 3/4” (19 mm)

39” (1 m) 79” (2 m)

s012309 u020209 u010811

Black Rocker Switch w/ 39" (1 m) Lead, 12/24VDC 6’ (1.8 m) 2-1/8” White Rocker Switch w/ 39" (1 m) Lead, 12/24VDC (54 mm)

L-RDSW-1M-WH-1 L-RDSW-2M-BL-1

Black Rocker Switch w/ 79" (2 m) Lead, 12/24VDC

L-RDSW-2M-WH-1

5’ Switch w/ 79" (2 m) Lead, 12/24VDC White Rocker

L-24VDC3INADP-BL-1

12VDC to 24VDC Controller Adaptor Cord Set Black

L-24VDC3INADP-WH-1

12VDC to 24VDC Controller Adaptor Cord Set White 14”

(1.5 m)

1-9/16” (40 mm)

(356 mm)

3/4" (19 mm) hole required. Female receptacle can accept up to Adaptor Cord Set required for 24VDC operation. (3) Power Supply plugs (120V ea.)

3/4” (19 mm) 5/8” (17 mm)

08B. RdbySw detail based ( f. TRE ) ALL New LL -1/23/09, on IL#9 Update caption to “Power Supply” for LED Spec Book 111 Hole size required - 19mm (3/4 in)

Touch On/Off Switch

17c. Touch On/Off Switch TS2-72

120V

s012309 u020209 u010811

6’ (1.8 m)

2-1/8” (54 mm)

1-9/16” (40 mm)

5’ (1.5 m) 14” (356 mm)

3-3/8” (85 mm)

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

Part #

Description

L-TS2-72-1

Touch On/Off w/Cord And Touch Pad. Black, 200W

On/off switch touch pad attaches to surface with adhesive backing. Power supply plugs into on/off switch.

1-800-227-1171 | trescolighting.com

3/4” (21 mm)

Controls 12VDC / 24VDC Plug-in Power Supplies

163

All product dimensions and specifications are subject to change without prior notice.

Install Accessories Wire Channel Features: Plastic channel for wire management Available in (3) finishes: Black, Brown and White Sold in 5’ (1.5 m) lengths Easily cut to size in the field

15/32" (11.8 mm)

Durable adhesive mounting

9/32" (7.3 mm)

Part #

Description

L-WM5-BL-1

5' (1.5 m) Wire Management Channel Black

L-WM5-BR-1

5' (1.5 m) Wire Management Channel Brown

L-WM5-WH-1

5' (1.5 m) Wire Management Channel White

12VDC/24VDC Class 2 Wire and DIY Connectors Part #

Description

L-16CL2-WH50-1

50' (15 m) Roll 16 AWG 12/24VDC Class 2 Wire White

L-LED-WCON-WH-1

12/24VDC DIY Barrel Connectors White (1 bag of 10)

L-LED-WCON-BL-1

12/24VDC DIY Barrel Connectors Black (1 bag of 10)

See Sales Support section (page# 178) for instructions on how to use Class 2 wire with Barrel Connectors.

Wire rated for low-voltage in-wall use

164

1-800-227-1171 | trescolighting.com

Install Accessories

All product dimensions and specifications are subject to change without prior notice.

AMP® Connector and Extractor

Part #

Description

L-PINEXT-1

AMP® Connector Extraction Tool

L-MALE-AMP-10-1

AMP® Connector for Light Fixture (box of 10)

Pin Extractor safely removes AMP® Connectors.

VHB Tape Part #

Description

L-VHBTPE-1134-1

7/16" (11 mm) x 111-1/2' (34 m) VHB Adhesive Tape Roll

Automotive grade VHB tape can be used to mount all fixtures or as a base layer for mounting Tape LED products.

Starter/Extension Cord Features: 66. LED -Link Cord D Low-voltage wire

01-14-10

Used to extend the starter leads for any Tresco® lights 7 lengths (12VDC) 3 lengths (24VDC) 1/2” (13 mm)

Hole size:

1/2” (13 mm)

12VDC

Part #

Description

L-LED-LINKD-8-1

8 cm (3”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-15-1

15 cm (6”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-25-1

25 cm (10”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-60-1

60 cm (24”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-120-1

120 cm (48”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-180-1

180 cm (72”) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-245-1

245 cm (96”) 12VDC Starter/Link/Extension Cord

24V DC 39”, 79”, 118” (1 m, 2 m, 3 m )

1-1/2” (38 mm) 7/16” (11 mm)

Part #

Description

L-24BBEXT-1M-1

1 m (39") 24VDC ML/FML Barrel Extension, White

L-24BBEXT-2M-1

2 m (79") 24VDC ML/FML Barrel Extension, White

L-24BBEXT-3M-1

3 m (119") 24VDC ML/FML Barrel Extension, White

1/2" (13 mm) hole required.

1-800-227-1171 | trescolighting.com

165

Install Accessories

All product dimensions and specifications are subject to change without prior notice.

Drill Bit Part #

Description

L-DB1732-1

17/32" (13 mm) Drill Bit

For installing Oval Controllers

Phillips Screwdriver Part #

Description

L-P1SCRWDR-1

#1 Phillips Screwdriver

Mini Flathead Screwdriver

166

Part #

Description

L-MFSCRWDR-1

Mini Flathead Screwdriver

1-800-227-1171 | trescolighting.com

Install Accessories

All product dimensions and specifications are subject to change without prior notice.

Tools of the Trade Starter Kit

Starter Kit Includes: 2 mount blocks

Mini flathead screwdriver

(1) 17/32” drill bit

50' (15 m) roll of class 2 wire

AMP® extractor

VHB tape

10 AMP® connectors

10 barrel connectors

15" (381 mm) canvas bag

Phillips screwdriver

10 wire management clips

Starter Kit: Part #

Description

L-TOOLKIT-1

Tools of the Trade Tool Bag Starter Kit

Replacement Items: Part #

Description

L-16CL2-WH50-1

50' (15 m) Roll 16 AWG 12/24VDC Class 2 Wire White

L-TRANS-MNT-BL-1

Extra 6-Snap Mounting Block

L-MALE-AMP-10-1

AMP® Connector for Light Fixture (1 bag of 10)

L-WCLP-WH-1

Wire Management Adhesive Clips White (1 bag of 10)

L-LED-WCON-WH-1

12/24VDC DIY Barrel Connectors White (1 bag of 10)

L-LED-WCON-BL-1

12/24VDC DIY Barrel Connectors Black (1 bag of 10)

L-DB1732-1

17/32" (13 mm) Drill Bit

L-P1SCRWDR-1

#1 Phillips Screwdriver

L-MFSCRWDR-1

Mini Flathead Screwdriver

L-PINEXT-1

AMP® Connector Extraction Tool

L-VHBTPE-1134-1

7/16" (11 mm) x 111-1/2' (34 m) VHB Adhesive Tape Roll

1-800-227-1171 | trescolighting.com

167

168

1-800-227-1171 | trescolighting.com

Battery

BATTERY

1-800-227-1171 | trescolighting.com

169

LED AlphaLight •

.8W

Battery

Alpha

061915

26 Lumens 3-9/64” (80 mm)

53°

Enlightenment begins with Alpha. The hassle-free wireless 2-35/64” mm) capacity USB rechargeable battery and slim profile of installation, (65 high this all-purpose ecological light allows illumination of areas that are frequently left in the dark. The Alpha light is perfect for utility closets, drawers, and cabinets.

Dimensions: LED

AlphaLight •

2-35 (65 /64” mm )

061915

3-9/64” (80 mm)

”

/64 3-9 mm) (80

2-35/64” (65 mm)

2-35 (65 /64” mm )

22˙

Available Finishes: 33/64” (15 mm)

3-9/64” (80 mm)

2-33/64” (65 mm)

Nickel (NI) ” /64 3-9 mm) 0 (8

Specifications:

Wattage

Lumens

Battery

Diode Life

Mounting

Motion Detection Range

Motion Detection Angle

"On" Time

Warranty

Beam Angle

.8W

5VDC Mini USB Rechargeable

20,000 Hours

Surface

79'' (2 m)

50°

10 Seconds

3 Year

53°

22˙

Photometric Data

Color Temperature 33/64” (15 mm)

Height

Light Output

Beam Area

1ft

12.50Fc

1.7ft L x 3ft W

3ft

1.39Fc

(14.9lx)

(.9 m L x .9 m W)

6ft

0.35Fc

10.3ft L x 18.2ft W

(.3 m) (.9 m) (1.8 m)

(134.5lx)

(3.7lx)

3-9/64” Warm White

(80 mm)

2-33/64” Daylight (65 mm)

Cool White

(.5 m L x .9 m W)

3ft L x 3ft W

2700K

(3.1 m L x 5.5 m W)

3000K

Warm (3000K)

L-HALPHA-WNI TESTED

See page 172 for part numbers and descriptions 170

Warm to Neutral

1-800-227-1171 | trescolighting.com

4500K

5500K

Cool (5000K)

6500K

LED FIT

32 Lumens

.8W

Battery

Fit

061915

40°

1-49/64” (45 mm)

Fit is the light that epitomizes form and function with its slim profile. Recessed in a depth of just 29/64” (10 mm), it blends into the cabinet 9-27/32” (250 mm) creating a clean appearance uncommon in other wireless fixtures, making it the picture perfect light that begs to be seen.

2” 7/3 m) 9-2 m 0 (25

LED FIT

061915

Dimensions:

Available Finishes:

1-49/64” (45 mm)

Nickel (NI) 9-27/32” (250 mm)

1-49/64” (45 mm)

29/64” (10 mm)

2” 7/3 m) 9-2 0m (25

Specifications:

Wattage

Lumens

Battery

Diode Life

Mounting

Motion Detection Range

Motion Detection Angle

"On" Time

Warranty

Beam Angle

.8W

AAA x 5

20,000 Hours

Recess

79'' (2 m)

110°

10 Seconds

3 Year

40°

Photometric Data

1-49/64” (45 mm)

Color Temperature

Height

Light Output

Beam Area

1ft

52.70Fc

.7ft L x .7ft W

3ft

5.86Fc

(196.8lx)

(.3 m L x .3 m W)

6ft

1.46Fc

4.4ft L x 4.3ft W

(.3 m) (.9 m) (1.8 m)

(1777.7lx)

(49.1lx)

29/64” (10 mm)

Warm White

Warm to Neutral

Cool White

Daylight

(.09 m L x .09 m W)

2.2ft L x 2.2ft W

2700K

3000K

(.6 m L x .6 m W)

4500K

5500K

6500K

Cool (5000K)

L-HFIT-CNI Tested

See page 172 for part numbers and descriptions 1-800-227-1171 | trescolighting.com

171

Battery

/64

”

All product dimensions and specifications are subject to change without 3-9 mm)prior notice. (80

Required 9-27/32” (250 mm)

LED AlphaLight Battery Alpha Series

Optional

•

061915

3-9/64” (80 mm)

Part #

Description

L-HALPHA-WNI-1

Battery Powered Light w/ Motion Sensor 3000K, Nickel

L-HALPHA-CNI-1

Battery Powered Light w/ Motion Sensor 5000K, Nickel

Includes mounting bracket and USB cord for re-charging

2-35/64” (65 mm)

22˙

2” 7/3 m) 9-2 0m (25

33/64” (15 mm)

3-9/64” (80 mm)

2-33/64” (65 mm)

2-35 (65 /64” mm )

Battery Fit

Part #

Description LED FIT

L-HFIT-CNI-1 1-49/64” (45 mm)

061915

Battery Powered Fit light w/ motion sensor, 5000K, Nickel

5 x” AAA Batteries included

/64 3-9 mm) (80

29/64” (10 mm)

1-49/64” (45 mm)

9-27/32” (250 mm)

22˙

4” mm)

3-9/64” (80 mm)

2-33/64” (65 mm)

2” 7/3 m) 9-2 0m (25

1-49/64” (45 mm)

29/64” (10 mm)

172

1-800-227-1171 | trescolighting.com

173

Sales Support

Basic Specifications to

Basic Specifications to Install Tresco Lights Install Tresco12VDC 12V Lights ®

With a PLUG-IN Power Supply With a PLug-In Power Supply

ndividually, use

he same time, use Option 2.

Select a Plug-In Power Supply.

(1) is is (1)Mounting MountingBlock Block included plug-in includedwith witheach each 12W, Power Supply. 18W or 60W Power Supply.

Select from several different types of Tresco Controllers.

12VDC LED Lights

0V all utlet

Mounting Block

For example: an 18W Power Supply can power up to (18) 1W Lights or (6) 3W Lights.

Up to (6) Controllers and/ or Lights can plug into (1) Mounting Block.

Tresco Lights 12VDC LED Lights

Option 1:

Note: Before making final connections, make sure to add up all the wattage of the lights used. Do not exceed the wattage rating of the Power Supply and each Controller.

Power Supplies are dimmable on

mmers mmer ntrols Control trols

To control all lights at the same time, use Option 2.

LegenD: nnections, make sure to add up all the wattage Power Supply ceed the wattage rating of the Power Supply

fferent ollers.

Option 1.

note: 12VDC plug-in Power Supplies are dimmable on the 12VDC side only.

Option 1.

To control each light individually, use

Tresco Lights

Controllers

1. Remote Control Control Dimmer Dimmers 1. Remote 2. Manual Rotary Dimmer 2. Manual Rotary Dimmer 3. Motion Sensor Controls 3. Motion Sensor Controls 4. Photo/Light Sensor Control 4. Touch Dimmer Controls 5. Touch Dimmer Controls 5. Door Sensors 6. Door Sensor

Up to six Controllers plugged into (1) Mounting Block

Power Supply

Mounting Block

Controllers

Tresco Lights

Option 2: One Controller plugged in before the Mounting Block

Tresco Lights

Power Supply

Controller

Mounting Block

Typical Installation Showing One Controller for All Lights (Linear vs. Puck) 120V Wall Outlet

12VDC Power Supply

Mounting Block

12VDC Power Supply

Mounting Block

Tresco Lights

Side view (Puck Light Install) 120V Wall Outlet

12VDC Power Supply Mounting Block

Side view (Puck Light Install) 12V Power Supply 12VDC

12V Mounting Block

Controller

174

Controller

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com

ed. Do not exceed the wattage rating of the Power Supply oller.

DC plug-in Power Supplies are dimmable on C side only.

Sales Support

Basic BasicSpecifications Specificationsto to Install Tresco 12VDC Install Tresco 12VLights Lights Tresco Lights

llers

om several different Tresco Controllers.

To turn all lights on/off at the same time, use a Wall

12VDC LED Lights

ote Control Dimmers al Rotary Dimmer n Sensor Controls /Light light Sensorindividually, Control each use Option 1. Dimmer Controls ll lights at the same time, use Option 2. Sensor

Switch.

To control (dim) all lights at the same time, use a Wall Dimmer.

With a With a HARDWIRE HArDWIrePower PowerSupply Supply

Note: Before making final connections, make sure to add up all the wattage of the lights used. Do not exceed the wattage rating of the Power Supply.

making final connections, make sure to add up all the wattage sed. Do not exceed the120V wattage rating of the Power Supply 120V roller.

VDC plug-in Power Supplies are dimmable on C side only.

Wall Switch or D. D.LeD Wall Dimmer Tresco Lights Choose an on/off switch or Tresco Lights

llers ollers

rom several different f Tresco Controllers.

ote Control Dimmers ual Rotary Dimmer on Sensor Controls o/Light Sensor Control h Dimmer Controls Sensor

ting Block

ock

Tresco Lights

Typical Hardwire Installation for 12V Pockit® Lights Hardwire 12VDC Power Supply

Mounting Block (optional)

LegenD: red = 120V Wiring Blue = 12VDC Wiring

120V

12V Power Supply 12VDC

Wall Switch or Wall Dimmer Tresco

Lights

Mounting Block

Wall Switch or Wall Dimmer

12V

ting Block

s. Puck)

(optional)

Caution: Cannot dim a Receptacle. ThisThis is aispotential hazard and Caution: DO NOT dim a receptacle. a potential hazard cancan cause Lights to flicker as well as damage PowerPower Supply. and cause lights to flicker as well as damage Supply.

120V (Puck Light Install) Side view

ollers

Mounting Block

Dimmable by standard LED Wall dimmers.

Hardwire 12VDC Mounting Block Power Supply (optional)

120V Wall Outlet

Dimmable Hardwire Power Supply

Tresco Lights

. Puck)

LED compatible dimmer 12VDC LED Lights switch.

Side view (Linear Install)

Typical Hardwire Installation for 12V Linear Lights

Tresco Lights Controller

Hardwire 12VDC Power Supply

Side 120V view (Puck Light Install) 2409 Plantside Dr. • Jeffersontown, KY 40299 12V Power Supply 12VDC 120V 800-227-1171 • Fax: 502-491-2215 Wall Mounting cservice@trescolighting.com Wall Switch or Outlet Block Wall Dimmer www.trescolighting.com

Wall Switch or Wall Dimmer 120V

12V

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com

175

Howto toWire WireaaKitchen Kitchen How with Lights withTresco Tresco12VDC 12V lights ®

Frameless Framed Cabinets forfor Frameless or or Framed Cabinets

• To wire a kitchen with Tresco 12V lights, first roughly lay out lighting system to help verify final positioning of all components. Make sure to add up all the wattage of the lighting system. Do not exceed the wattage rating of the Power Supply. If using a Tresco D.I.Y. Controller, do not exceed the wattage of the Controller.

In-Wall Wiring:

For in-wall wiring – typically used for frameless cabinets – use 16-gauge Class 2 wire (minimum) to route wire through kitchen walls (see 1st illustration below). For outside of wall wiring – typically used for framed cabinets – use wires provided with Tresco lighting fixtures with appropriate link and extension leads (LINKD series) that are available in several lengths.

Note: A licensed electrician should be consulted for wiring through walls and other permanent structures. When mounting and wiring a light system, follow all local electric codes and the National Electrical Code (NEC).

Typical for FRaMElESS Cabinets (example installation of 12VDC Linear Lights)

WCON (Barrel Connectors)

Wires that are attached to or accompany Tresco® lighting systems are not approved for in-wall use. Class 2 wire must be used (purchased separately). Class 2, 16-gauge wire is the minimum for in-wall applications.

Side view

120V Wall Outlet 12VDC Power Supply

120V Wall Outlet

12V

Red = 120V Purple = Class 2 Wire Blue = 12VdC

WCON (Barrel Connectors)

(above cabinets)

lEgEnd:

12VDC Power Supply

12V

16-gauge Class 2 wire fed inside wall

WCON

12V wire that accompanies Lights

WCON

OuTSIdE of Wall Wiring: Typical for FRaMEd Cabinets

Side view

(example installation of 12VDC Pockit® Lights) Mounting Block

12VDC Power Supply

120V Wall Outlet

(above cabinets)

12V

12VDC Power Supply

Mounting Block

12V

Wires that accompany Tresco lighting fixtures are fed behind or in-between cabinets

length of Wire from Power Supply to Run of lights This is a general guide based on a 60 Watt/5 Amp load: - Recommended maximum length using Class 2, 16-gauge (AWG) wire = 7.6 meters (25 ft.) - Recommended maximum length using links/extensions that accompany Tresco lights = 4.6 meters (15 ft.)

176

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com

Used.I.Y. D.I.Y.Connectors Connectors use with with Class Class 22Wire Wire

ForFor Making Junction Making JunctionBetween Between In-Wall Wiring & light Fixture In-Wall Wiring and Light FixtureWire Wire • Wires that are attached to or accompany Tresco lighting systems are not approved for in-wall use. Class 2, 16-gauge wires must be used (purchased separately). Class 2, 16-gauge wire is the minimum for in-wall applications.

Items required for in-wall installation: • (10) Barrel Connectors White . . . . . . . . . . . . . . . . . L-LED-WCON-WH-1 Black . . . . . . . . . . . . . . . . . . L-LED-WCON-BL-1 • Class 2, 16 AWG wire

White, 15.2 m (50 ft.) roll . . . L-16CL2-WH50-1 White, 76.2 m (250 ft.) roll . . L-16CL2-WH250-1

• Small screwdriver

Black, mini slotted . . . . . . . L-MFSCRWDR-1

note: Make sure electrical polarity (positive and negative) is correctly maintained when making junction between Class 2 wire and Light Fixture wire. (+) Red to (+) Red (-) Black to (-) Black Note: Fixture wires are tagged (+) (-) when red- and black-colored wires are not utilized.

WCOn - Barrel Connectors

Class 2 Wire

Class 2 Wire from Power Supply

Wire to Lights

Typical In-Wall Wiring with Kitchen Cabinets (example installation of 12V Linear Lights) 12V WCON (Barrel Connectors)

12VDC Power Supply

16-gauge Class 2 wire routed inside wall around windows, etc.

120V Wall Outlet

(above cabinets)

12V 16-gauge Class 2 wire fed inside wall WCON

Lighting Link Cord

WCON

1-800-227-1171 | trescolighting.com

WCON

177

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com

Understanding

Understanding VoltageDrop Drop Voltage

Voltage drop is the amount of electric current lost due to the resistance of the conductors (wires).

When Lighting When Installing Installing Tresco Tresco 12VDC 12V Lighting Pockit® (Puck) Light Series (Puck) Light Series Pockit

On most installations – even larger installations – voltage drop is not an issue, but excessive voltage drop could result in diminished light output. Keeping wire length in mind is a best practice to ensure optimum light performance.

For instance, if specifications recommend that the maximum length from Power Supply to the first Light not exceed 5 meters (16 ft.), the light will still work if you exceed that length! Again the loss is gradual, but an excessive length could result in dimmer light.

• Note: The information provided for measuring voltage drop is a general guide only based on the length of the run and assuming 50% load (30W). Voltage drop goes down with less load and voltage drop goes up with more load. Other factors may influence voltage drop. All measurements and calculations are approximate.

Other factors also influence voltage drop, including the number of connectors, quality of the conductor (aluminum vs. copper wires), and cross-sectional area (gauge).

• In-wall wiring: Wires that are attached to or accompany Tresco lighting systems are not approved for in-wall use. Class 2, 16-gauge (AWG) wires must be used (purchased separately).

All Tresco wires and cords provided are specifically for wiring outside of walls and have a 4.6 meters (15 ft.) maximum length recommendation.

• All Tresco Power Supplies can be applied to the information provided herein on voltage drop.

Ideally, Voltage Drop variance should be within 5%. Absolute maximum should never exceed 8%.

For in-wall wiring, stranded Class 2, 16-gauge wires must be used (purchased separately). Also if needed, lower gauge (which means larger wire) helps reduce voltage drop by lowering overall resistance.

• Recommended maximum length using links/extensions that accompany Tresco lights = 4.6 meters (15 ft.). • Recommended maximum length using Class 2, 16-gauge wire = 7.6 meters (25 ft.).

12V Pockit® Lights (Puck) Example 1:

2.1 m (7 ft.)

-2.3%

Total length of wires

0.3 m (1 ft.)

12V

0.15 m (6 in.)

2 m (79 in.)

0.15 m (6 in.)

Voltage Drop

11.7V #1

120V

Mounting Block

12VDC Power Supply

Cord that comes with light

4 m (13 ft.)

Example 2: 12V

0.15 m (6 in.)

-4.3%

Total length of wires

0.3 m (1 ft.)

Tresco Light

Voltage Drop

3.7 m (12 ft.)

0.15 m (6 in.)

1.8 m (72 in.)

2m (79 in.)

11.5V #2

120V

Mounting Block

12VDC Power Supply

12V

Cord that comes with Tresco Light light

(1) L-LED-LINKD-180

extension cord

-10.3% =

TOTAL Voltage Drop

9.5 m (31 ft.)

Example 3:

Total length of wires

-6% Voltage

-4.3% Voltage 4 m (13 ft.)

12V

0.15 m (6 in.)

1.8 m (72 in.)

Drop from Mounting Block to Light

Drop from

Power Supply to Mounting Block

0.15 m (6 in.)

11.5V

5.5 m (18 ft.) 1.8 m (72 in.)

1.8 m (72 in.)

2m (79 in.)

10.8V #3

120V

12VDC Power Supply

12V

(2) L-LED-LINKD-180

extension cords

Mounting Block

(2) L-LED-LINKD-180

extension cords

Cord that comes with light

Tresco Light

Note: The overall Voltage Drop variance between Light #1 and Light #3 is 8%, which is noticeable.

178

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 800-227-1171 • Fax: 502-491-2215

Understanding Understanding Voltage Drop Voltage

Tresco’s longest linking cords are 2 meters (79 in.) which is only a 2% voltage drop – without a noticeable difference in light output. • Note: The information provided for measuring voltage drop is a general guide only based on the length of the run and assuming 50% load (30W). Voltage drop goes down with less load and voltage drop goes up with more load. Other factors may influence voltage drop. All measurements and calculations are approximate.

When Installing Tresco12VDC 12V Lighting When Installing Tresco Lighting Linear Linkable Series Linear Linkable Series ®

12V Linear Lights Linked in Series Using Link Cords Linear Lights are typically within 1 meter (3 ft.) of each other without a noticeable voltage drop (less than 1%).

Example 1:

-1.3% = TOTAL

1.2 m (4 ft.)

Voltage Drop

Total length of wires

-0.7% Voltage Drop

from Power Supply to Light

0.6 m (2 ft.)

12V

120V

0.3 m (1 ft.)

Mounting Block

12VDC Power Supply

-0.3% Voltage Drop

0.3 m (1 ft.)

11.9V

from previous Light

0.3 m (1 ft.)

11.9V

Light #2

Light #1

12V

-0.3% Voltage Drop

from previous Light

First Voltage Drop is critical to ensure that the start of a run is within 5-8% variance maximum.

11.8V

Light #3

Secondary Voltage Drop is often less critical, since excessive link cord use is not typical.

The total Voltage Drop is 1.3% with a variance between Light #1 and Light #3 of 0.6% which is not noticeable.

Example 2:

-7% = TOTAL

6.4 m (21 ft.)

Voltage Drop

Total length of wires

12V

120V

from Power Supply to Light

0.3 m (1 ft.)

Mounting Block

12VDC Power Supply

-0.3% Voltage Drop

-0.7% Voltage Drop

0.6 m (2 ft.)

12V

11.9V

-6% Voltage Drop

from previous Light

0.3 m (1 ft.)

from previous Light

5.5 m (18 ft.)

11.9V

Light #2

Light #1

11.2V

(3) L-LED-LINKD-180

The total Voltage Drop is 7% with a variance between Light #1 and Light #3 of 6.3% which is not noticeable.

Example 3:

-9% = TOTAL

8.2 m (27 ft.)

Voltage Drop

Total length of wires

3.7 m (12 ft.)

4.0 m (13 ft.)

12V

120V

12VDC Power Supply

Light #3

extension cords

0.15 m (6 in.)

3.7 m (12 ft.)

0.15 m (6 in.)

(2) L-LED-LINKD-180

extension cords

1.8 m (72 in.)

Mounting Block

12V

-8.3% Voltage Drop

from Power Supply to Light

2m (79 in.)

(1) L-LED-LINKD-180

11.0V

Light #1

0.3 m (1 ft.)

-0.3% Voltage Drop from previous Light

11.0V

Light #2

0.3 m (1 ft.)

-0.3% Voltage Drop from previous Light

10.9V

Light #3

extension cord

Voltage Drop to Light #1 is above 5-8% variance. Run of lights will be dimmer than expected. The total Voltage Drop is 9% with a variance between Light #1 and Light #3 of 0.7% which is not noticeable.

1-800-227-1171 | trescolighting.com

2409 Plantside Dr. • Jeffersontown, KY 40299 179 800-227-1171 • Fax: 502-491-2215 cservice@trescolighting.com www.trescolighting.com

Product Index L-12DCH60X1-1.................................45, 67, 88, 139, 140

L-CTCL-153P-WH-1................................................47, 149

L-FLXCOB24-35RU-1......................................................90

L-12DCH60X1-1*..............................................................146

L-DB1732-1......................................................160, 166, 167

L-FLXCOB24-48RU-1......................................................90

L-12DCH60X3-1................................45, 67, 88, 139, 140

L-DC-ELT15WP-CON-1........45, 67, 88, 139, 140, 144

L-FLXCOB24-65RU-1......................................................90

L-12DCH60X3-1*.............................................................146

L-DC-ELT18-CON-1...............45, 67, 88, 139, 140, 142

L-FLXTPE-12CCT-1......................................................... 102

L-16CL2-WH50-1...................................................164, 167

L-DC-ELT6WP-CON-1..........45, 67, 88, 139, 140, 144

L-FLXTPE-12RGB-1........................................................ 103

L-1BRL5-1.................................................90, 132, 147, 148

L-DC-EQ30-1............................45, 67, 88, 139, 140, 144

L-FLXTPE-24CCT-1........................................................ 102

L-24B2SPKT-2M-1...................................................90, 117

L-DC-EQ60-1............................45, 67, 88, 139, 140, 144

L-FLXTPE-24RGB-1....................................................... 103

L-24B2SPKT-2M-TEE-1................................................90

L-DC-SLELT30-1.....................45, 67, 88, 139, 140, 143

L-FLXTPE-27EER-1.......................................................... 87

L-24BBEXT-1M-1............................................90, 132, 165

L-DC-SLELT60-1....................45, 67, 88, 139, 140, 143

L-FLXTPE-27RU-1............................................................86

L-24BBEXT-2M-1...........................................90, 132, 165

L-DCE30D-CON-1.................. 45, 67, 88, 139, 140, 145

L-FLXTPE-30RH-1............................................................86

L-24BBEXT-3M-1...........................................90, 132, 165

L-DCE60D-CON-1.................. 45, 67, 88, 139, 140, 145

L-FLXTPE-30RS-1.............................................................86

L-24DCELT15WP-1.........................................90, 132, 147

L-DSL06-1LZ-1..........................................................47, 149

L-FLXTPE-30RU-1............................................................86

L-24DCELT48-BL-1.......................................90, 132, 147

L-DVCL-153P-WH-1................................................47, 149

L-FLXTPE-30RV-1............................................................86

L-24DCELT96-1...............................................90, 132, 147

L-EUL-GTD-1....................................................................... 66

L-FLXTPE-35EER-1.......................................................... 87

L-24DCH96X1-1........................................................90, 132

L-EUL11W-806CAL-1....................................................... 66

L-FLXTPE-35RU-1............................................................86

L-24DCH96X1-1*.............................................................148

L-EUL11W-806WAL-1..................................................... 66

L-FLXTPE-48EER-1.......................................................... 87

L-24DCH96X3-1.......................................................90, 132

L-EUL15W-1111CAL-1....................................................... 66

L-FLXTPE-48RU-1............................................................86

L-24DCH96X3-1*............................................................148

L-EUL15W-1111WAL-1..................................................... 66

L-FLXTPE-65EER-1.......................................................... 87

L-24VDC3INADP-BL-1................................159, 162, 163

L-EUL3W-197CAL-1......................................................... 66

L-FLXTPE-65RU-1............................................................86

L-24VDC3INADP-WH-1.............................159, 162, 163

L-EUL3W-197WAL-1....................................................... 66

L-FLXTPE-CRV-1...............................................................86

L-24XPKT-2M-BL-1.........................................................117

L-EUL4W-273CAL-1........................................................ 66

L-FLXTPE-DRV-1...............................................................86

L-24XPKT-2M-WH-1......................................................117

L-EUL4W-273WAL-1...................................................... 66

L-FLXTPE-NRV-1..............................................................86

L-4P6O-1...................................................................103, 104

L-EUL7W-502CAL-1........................................................ 66

L-FLXTPE-WRV-1.............................................................86

L-ACR6M-1X1-1.................................................................125

L-EUL7W-502WAL-1...................................................... 66

L-FPOC-HWB-ADP-BL-1............................................... 47

L-ACR6M-2X2-1...............................................................125

L-EULNK-120-WH-1........................................................ 66

L-FPOC-HWB-ADP-WH-1............................................. 47

L-ACR6M-4X4-1..............................................................125

L-EULNK-15-WH-1........................................................... 66

L-FPOC-LINKA-120-BL-1...............................................46

L-ACR6M-4X8-1...............................................................125

L-EULNK-180-WH-1........................................................ 66

L-FPOC-LINKA-120-WH-1............................................46

L-ACR8M-1X1-1................................................................125

L-EULNK-25-WH-1.......................................................... 66

L-FPOC-LINKA-180-BL-1...............................................46

L-ACR8M-2X2-1...............................................................125

L-EULNK-60-WH-1.......................................................... 66

L-FPOC-LINKA-180-WH-1............................................46

L-ACR8M-4X4-1..............................................................125

L-EXTBTB10-1....................................................................117

L-FPOC-LINKA-25-BL-1.................................................46

L-ACR8M-4X8-1..............................................................125

L-EXTMP-VHB-1...............................................................117

L-FPOC-LINKA-25-WH-1...............................................46

L-ADJTKIT-BL-1.................................................................44

L-FLXCOB12-27RV-1........................................................88

L-FPOC-LINKA-60-BL-1.................................................46

L-ADJTKIT-NI-1..................................................................44

L-FLXCOB12-30RV-1.......................................................88

L-FPOC-LINKA-60-WH-1..............................................46

L-ADJTKIT-WH-1...............................................................44

L-FLXCOB12-35RV-1........................................................88

L-HACNT-CNI-1................................................................140

L-BS4PBL-1..............................................................103, 104

L-FLXCOB12-48RV-1.......................................................88

L-HACNT-WNI-1..............................................................140

L-CCTEXT-120-1.............................................................. 102

L-FLXCOB12-65RV-1.......................................................88

L-HALPHA-CNI-1..............................................................172

L-CCTEXT-60-1................................................................ 102

L-FLXCOB24-27RU-1......................................................90

L-HALPHA-WNI-1............................................................172

L-CCTWIRE25-1............................................................... 103

L-FLXCOB24-30RU-1......................................................90

L-HFIT-CNI-1......................................................................172

180

1-800-227-1171 | trescolighting.com

L-HUSB2-BLNI-1.............................................................140

L-LED-FLXTPE-WROLL-1..............................................86

L-LED-STK8-WNI-1.........................................................64

L-HWB-BL-T5-1.........................................................47, 68

L-LED-LINKD-120-1................................................ 67, 165

L-LED-STKDIM-TD4-1....................................................64

L-HWB-BL-T5-S-1.....................................................47, 68

L-LED-LINKD-15-1................................................... 67, 165

L-LED-STKLNK-120-1.....................................................64

L-HWB-WH-T5-1.......................................................47, 68

L-LED-LINKD-180-1................................................ 67, 165

L-LED-STKLNK-15-1........................................................64

L-HWB-WH-T5-S-1..................................................47, 68

L-LED-LINKD-245-1............................................... 67, 165

L-LED-STKLNK-180-1.....................................................64

L-LED-1EB-CBL-1..............................................................43

L-LED-LINKD-25-1.................................................. 67, 165

L-LED-STKLNK-25-1.......................................................64

L-LED-1EB-CNI-1...............................................................43

L-LED-LINKD-60-1.................................................. 67, 165

L-LED-STKLNK-5-1..........................................................64

L-LED-1EB-CWH-1............................................................43

L-LED-LINKD-8-1..................................................... 67, 165

L-LED-STKLNK-60-1.......................................................64

L-LED-1EB-WBL-1............................................................43

L-LED-OVLDS-**-1......................................................... 160

L-LED-TPELNK-120-1.....................................................89

L-LED-1EB-WNI-1.............................................................43

L-LED-OVLMS-**-1........................................................ 160

L-LED-TPELNK-15-1........................................................89

L-LED-1EB-WWH-1..........................................................43

L-LED-OVLTD-**-1......................................................... 160

L-LED-TPELNK-180-1.....................................................89

L-LED-3DSP-CBL-1..........................................................43

L-LED-SMP12-CNI-1........................................................ 65

L-LED-TPELNK-25-1.......................................................89

L-LED-3DSP-CNI-1...........................................................43

L-LED-SMP12-WNI-1...................................................... 65

L-LED-TPELNK-5-1..........................................................89

L-LED-3DSP-WBL-1........................................................43

L-LED-SMP22-CNI-1....................................................... 65

L-LED-TPELNK-60-1.......................................................89

L-LED-3DSP-WNI-1.........................................................43

L-LED-SMP22-WNI-1..................................................... 65

L-LED-TPELNK-CON90-1..............................................89

L-LED-AGLPR-1016CAL-1.............................................. 66

L-LED-SMP8-CNI-1.......................................................... 65

L-LED-TPELNK-TEE-1.....................................................89

L-LED-AGLPR-1016WAL-1............................................ 66

L-LED-SMP8-WNI-1........................................................ 65

L-LED-TPEPKT-2M-1..............................................88, 117

L-LED-AGLPR-250CAL-1............................................... 66

L-LED-SMPLNK-120-1.................................................... 65

L-LED-TPEPKT-2M-TEE-1............................................88

L-LED-AGLPR-250WAL-1............................................. 66

L-LED-SMPLNK-15-1....................................................... 65

L-LED-WCON-BL-1...............................................164, 167

L-LED-AGLPR-406CAL-1............................................... 66

L-LED-SMPLNK-180-1.................................................... 65

L-LED-WCON-WH-1.............................................164, 167

L-LED-AGLPR-406WAL-1............................................. 66

L-LED-SMPLNK-25-1...................................................... 65

L-LT5-HWBADP-BL-1.....................................................68

L-LED-AGLPR-559WAL-1.............................................. 66

L-LED-SMPLNK-5-1......................................................... 65

L-LT5-HWBADP-WH-1..................................................68

L-LED-AGLPR-711CAL-1................................................. 66

L-LED-SMPLNK-60-1...................................................... 65

L-LT5-LNK120-BL-1.........................................................68

L-LED-AGLPR-711WAL-1............................................... 66

L-LED-SMPMOT-1............................................................ 65

L-LT5-LNK120-WH-1......................................................68

L-LED-AGLPR-864WAL-1............................................. 66

L-LED-SMPTD4-1............................................................. 65

L-LT5-LNK15-BL-1............................................................68

L-LED-DIMCON-BL-1.................................................... 162

L-LED-SQPR-1016CAL-1.................................................67

L-LT5-LNK15-WH-1.........................................................68

L-LED-DIMCON-WH-1.................................................. 162

L-LED-SQPR-1016WAL-1................................................67

L-LT5-LNK180-BL-1........................................................68

L-LED-DIMRMT-12V8A-1.............................................159

L-LED-SQPR-250CAL-1...................................................67

L-LT5-LNK180-WH-1......................................................68

L-LED-DIMRMT-12V8A-U-1*.....................................159

L-LED-SQPR-250WAL-1.................................................67

L-LT5-LNK25-BL-1...........................................................68

L-LED-FLXTPE-BRHO-1.................................................86

L-LED-SQPR-406WAL-1................................................67

L-LT5-LNK25-WH-1........................................................68

L-LED-FLXTPE-BROLL-1...............................................86

L-LED-SQPR-559CAL-1...................................................67

L-LT5-LNK60-BL-1..........................................................68

L-LED-FLXTPE-CRHO-1.................................................86

L-LED-SQPR-559WAL-1.................................................67

L-LT5-LNK60-WH-1........................................................68

L-LED-FLXTPE-CROLL-1................................................86

L-LED-SQPR-711WAL-1...................................................67

L-LT514W-904C*-1.........................................................68

L-LED-FLXTPE-DRHO-1.................................................86

L-LED-SQPR-864CAL-1..................................................67

L-LT514W-904D*-1.........................................................68

L-LED-FLXTPE-DROLL-1...............................................86

L-LED-SQPR-864WAL-1................................................67

L-LT514W-904W*-1.......................................................68

L-LED-FLXTPE-NRHO-1.................................................86

L-LED-STK12-CNI-1.........................................................64

L-LT518W-1204C*-1........................................................68

L-LED-FLXTPE-NROLL-1...............................................86

L-LED-STK12-WNI-1........................................................64

L-LT518W-1204D*-1.......................................................68

L-LED-FLXTPE-RRHO-1.................................................86

L-LED-STK22-CNI-1.........................................................64

L-LT518W-1204W*-1......................................................68

L-LED-FLXTPE-RROLL-1...............................................86

L-LED-STK22-WNI-1.......................................................64

L-LT525W-1504C*-1.......................................................68

L-LED-FLXTPE-WRHO-1...............................................86

L-LED-STK8-CNI-1...........................................................64

L-LT525W-1504D*-1.......................................................68

1-800-227-1171 | trescolighting.com

181

L-LT525W-1504W*-1.....................................................68

L-POC-3EQFR-WBL-1.....................................................44

L-SMPHO12-WNI-1.......................................................... 65

L-LT53W-267C*-1............................................................68

L-POC-3EQFR-WNI-1......................................................44

L-SMPHO22-CNI-1........................................................... 65

L-LT53W-267D*-1............................................................68

L-POC-3LEDSFR-CAB-1.................................................42

L-SMPHO22-WNI-1......................................................... 65

L-LT53W-267W*-1..........................................................68

L-POC-3LEDSFR-CBL-1..................................................42

L-SMPHO8-CNI-1.............................................................. 65

L-LT54W-343C*-1............................................................68

L-POC-3LEDSFR-CCH-1.................................................42

L-SMPHO8-WNI-1............................................................ 65

L-LT54W-343D*-1...........................................................68

L-POC-3LEDSFR-CNI-1...................................................42

L-SMR-2LED-BL-1............................................................44

L-LT54W-343W*-1..........................................................68

L-POC-3LEDSFR-CWH-1...............................................42

L-SMR-2LED-NI-1............................................................44

L-LT57W-571C*-1.............................................................68

L-POC-3LEDSFR-NBL-1.................................................42

L-SP15WA-30K-1.............................................................132

L-LT57W-571D*-1.............................................................68

L-POC-3LEDSFR-NNI-1..................................................42

L-SP15WA-40K-1.............................................................132

L-LT57W-571W*-1............................................................68

L-POC-3LEDSFR-WAB-1...............................................42

L-SP15WA-50K-1.............................................................132

L-MALE-AMP-10-1.................................................167, 165

L-POC-3LEDSFR-WBL-1................................................42

L-SP15WA-65K-1.............................................................132

L-MFSCRWDR-1..................................................... 166, 167

L-POC-3LEDSFR-WCH-1...............................................42

L-SP3TCS-1.........................................................................132

L-MPOC-4W-120L-CBL-1.............................................45

L-POC-3LEDSFR-WNI-1.................................................42

L-SP6TCS-1.........................................................................132

L-MPOC-4W-120L-CNI-1..............................................45

L-POC-3LEDSFR-WORB-1............................................42

L-SP8WA-30K-1...............................................................132

L-MPOC-4W-120L-CWH-1...........................................45

L-POC-3LEDSFR-WWH-1..............................................42

L-SP8WA-40K-1..............................................................132

L-MPOC-4W-120L-WBL-1...........................................45

L-POC-5ADJ-C-1................................................................44

L-SP8WA-50K-1...............................................................132

L-MPOC-4W-120L-WNI-1............................................45

L-POC-5ADJ-W-1..............................................................44

L-SP8WA-65K-1...............................................................132

L-MPOC-4W-120L-WWH-1.........................................45

L-POC-5LEDSCL-CBL-1..................................................43

L-SP90BTB4-1..................................................................132

L-MPOC-4W-120NL-CBL-1..........................................45

L-POC-5LEDSCL-CNI-1...................................................43

L-SPBTB10-1......................................................................132

L-MPOC-4W-120NL-CNI-1...........................................45

L-POC-5LEDSCL-CWH-1................................................43

L-SPLNK120-1...................................................................132

L-MPOC-4W-120NL-CWH-1.......................................45

L-POC-5LEDSCL-WBL-1................................................43

L-SPLNK25-1......................................................................132

L-MPOC-4W-120NL-WBL-1........................................45

L-POC-5LEDSCL-WNI-1.................................................43

L-SPLNK60-1.....................................................................132

L-MPOC-4W-120NL-WNI-1.........................................45

L-POC-5LEDSCL-WORB-1.............................................43

L-SPLNK8-1........................................................................132

L-MPOC-4W-120NL-WWH-1.....................................45

L-POC-5LEDSCL-WWH-1..............................................43

L-SPPKT-1M-1...................................................................132

L-MPOC-PKT8-BL-1........................................................46

L-RDSW-1M-120-BL-1...................................................46

L-SPPKT-305MM-1........................................................132

L-MPOC-PKT8-WH-1......................................................46

L-RDSW-1M-120-WH-1.................................................46

L-SPPKT-3M-1..................................................................132

L-P1SCRWDR-1....................................................... 166, 167

L-RDSW-1M-BL-1........................................................... 163

L-STKHO12-CNI-1.............................................................64

L-PANELKIT-DO1............................................................. 126

L-RDSW-1M-WH-1........................................................ 163

L-STKHO12-WNI-1............................................................64

L-PANELKIT-DO2............................................................ 126

L-RDSW-2M-120-BL-1...................................................46

L-STKHO22-CNI-1.............................................................64

L-PINEXT-1................................................................165, 167

L-RDSW-2M-120-WH-1................................................46

L-STKHO22-WNI-1...........................................................64

L-POC-1LEDSFR-CBL-1...................................................42

L-RDSW-2M-BL-1.......................................................... 163

L-STKHO34-CNI-1............................................................64

L-POC-1LEDSFR-CNI-1...................................................42

L-RDSW-2M-WH-1........................................................ 163

L-STKHO34-WNI-1..........................................................64

L-POC-1LEDSFR-CORB-1...............................................42

L-RGBCCT-RMT-1..................................................102, 104

L-STKHO8-CNI-1...............................................................64

L-POC-1LEDSFR-CWH-1................................................42

L-RGBCCT1-CREC-1.........................................................156

L-STKHO8-WNI-1.............................................................64

L-POC-1LEDSFR-WBL-1.................................................42

L-RGBCCT1-CREC-1*.............................................102, 104

L-STX-BLNK-BL-1.......................................................... 139

L-POC-1LEDSFR-WNI-1..................................................42

L-RGBCCT1-PREC-1......................................102, 104, 156

L-STX-BLNK-NI-1........................................................... 139

L-POC-1LEDSFR-WORB-1.............................................42

L-RGBEXT-120-1.............................................................104

L-STX-LITE-CBL-1.......................................................... 139

L-POC-1LEDSFR-WWH-1..............................................42

L-RGBEXT-60-1...............................................................104

L-STX-LITE-CNI-1........................................................... 139

L-POC-3EQFR-CBL-1.......................................................44

L-RGBWIRE25-1..............................................................104

L-STX-LITE-WBL-1........................................................ 139

L-POC-3EQFR-CNI-1........................................................44

L-SMPHO12-CNI-1............................................................ 65

L-STX-LITE-WNI-1......................................................... 139

182

1-800-227-1171 | trescolighting.com

L-STX-SKIT-CBL-1.......................................................... 139

L-TPELNK60-CCT-1....................................................... 103

L-XFL94-SC-1.................................................................... 116

L-STX-SKIT-CNI-1........................................................... 139

L-TPELNK60-RGB-1......................................................104

L-XLNK-120-**-1...............................................................117

L-STX-SKIT-WBL-1........................................................ 139

L-TPEPKT-2IN-1........................................................88, 117

L-XLNK-15-**-1..................................................................117

L-STX-SKIT-WNI-1......................................................... 139

L-TPEPKT-2IN-RGB-1................................................... 103

L-XLNK-180-**-1..............................................................117

L-TOOLKIT-1.......................................................................167

L-TPEPKT-2M-RGB-1................................................... 103

L-XLNK-25-**-1.................................................................117

L-TPE-BTB-CCT-1........................................................... 102

L-TRANS-MNT-BL-1...... 142, 143, 144, 145, 146, 167

L-XLNK-60-**-1................................................................117

L-TPE-BTB-RGB-1..........................................................104

L-TRS5-UCLP-M-1...........................................................68

L-XPKT-2IN-BL-1..............................................................117

L-TPEPKT-2IN-CCT-1.................................................... 102

L-TS2-72-1..................................................................46, 163

L-XPKT-2IN-WH-1...........................................................117

L-TPEPKT-2M-CCT-1.................................................... 102

L-VHBTPE-1134-1...................................................165, 167

L-XPKT-2M-BL-1..............................................................117

L-TPE6-12IN-**K-1..........................................................125

L-WCLP-WH-1...................................................................167

L-XPKT-2M-WH-1............................................................117

L-TPE6-24IN-**K-1.........................................................125

L-WLD-1REC-1.......................................150, 151, 152, 153

L-XREC72-BL-1................................................................. 116

L-TPE6-48IN-**K-1........................................................125

L-WLD-1RND-BL-1..........................................................152

L-XREC72-SC-1................................................................. 116

L-TPE6-96IN-**K-1.........................................................125

L-WLD-1RND-NI-1...........................................................152

L-XREC94-BL-1................................................................. 116

L-TPELED-24RGB-1....................................................... 103

L-WLD-1WAL-**-1.......................................................... 151

L-XREC94-SC-1................................................................. 116

L-TPELED-27HER-1......................................................... 87

L-WLD-2WAL-**-1.......................................................... 151

L-XRECCBOYY-XX-1........................................................ 161

L-TPELED-27SER-1.......................................................... 87

L-WLD-3RMT-BL-1.........................................................153

L-XRECDIMA-XX-1.......................................................... 161

L-TPELED-30HER-1......................................................... 87

L-WLD-CCT-WH-1........................................102, 104, 157

L-XRECECP-BL-1.............................................................. 116

L-TPELED-30SER-1.......................................................... 87

L-WLD-RGB-WH-1.......................................102, 104, 157

L-XRECECP-GY-1.............................................................. 116

L-TPELED-35HER-1......................................................... 87

L-WLDS-BL-1.....................................................................155

L-XRM42-155-1.................................................................117

L-TPELED-35SER-1.......................................................... 87

L-WLDS-NI-1.....................................................................155

L-XRND-UCLP-1................................................................117

L-TPELED-48HER-1......................................................... 87

L-WLDSREC-1................................................................... 154

L-XRND72-BL-1................................................................ 116

L-TPELED-48SER-1......................................................... 87

L-WM5-BL-1.....................................................................164

L-XRND72-SC-1................................................................ 116

L-TPELED-65HER-1......................................................... 87

L-WM5-BR-1.....................................................................164

L-XRNDCBOYY-XX-1...................................................... 161

L-TPELED-65SER-1.......................................................... 87

L-WM5-WH-1...................................................................164

L-XRNDDIMA-XX-1......................................................... 161

L-TPELED2-27VER-1....................................................... 87

L-X**-DIFF-CL-1............................................................... 116

L-XRNDECP-BL-1............................................................. 116

L-TPELED2-30VER-1....................................................... 87

L-X**-DIFF-FR-1............................................................... 116

L-XRNDECP-GY-1............................................................. 116

L-TPELED2-35VER-1....................................................... 87

L-X**-DIFF-MLK-1........................................................... 116

L-XSBTB-1............................................................................89

L-TPELED2-48VER-1...................................................... 87

L-XANG72-**-1................................................................. 116

L-XSQR-UCLP-1.................................................................117

L-TPELED2-65VER-1....................................................... 87

L-XANG72-SC-1................................................................ 116

L-XSQR72-**-1.................................................................. 116

L-TPELNK-BTB-1..............................................................89

L-XANGCBOYY-XX-1...................................................... 161

L-XSQR72-SC-1................................................................. 116

L-TPELNK120-CCT-1..................................................... 103

L-XANGDIMA-XX-1......................................................... 161

L-XSQRCBOYY-XX-1....................................................... 161

L-TPELNK120-RGB-1.....................................................104

L-XANGECP-**-1.............................................................. 116

L-XSQRDIMA-XX-1.......................................................... 161

L-TPELNK15-CCT-1........................................................ 103

L-XANGECP-GY-1............................................................. 116

L-XSQRECP-**-1............................................................... 116

L-TPELNK15-RGB-1........................................................104

L-XCRV72-**-1.................................................................. 116

L-XSQRECP-GY-1............................................................. 116

L-TPELNK180-CCT-1..................................................... 103

L-XCRV72-SC-1................................................................. 116

L-XSQRSWCLP-1...............................................................117

L-TPELNK180-RGB-1....................................................104

L-XCRVCBOYY-XX-1....................................................... 161

L-TPELNK25-CCT-1........................................................ 103

L-XCRVDIMA-XX-1.......................................................... 161

L-TPELNK25-RGB-1.......................................................104

L-XCRVECP-**-1............................................................... 116

L-TPELNK5-CCT-1.......................................................... 103

L-XCRVECP-GY-1............................................................. 116

L-TPELNK5-RGB-1..........................................................104

L-XFL72-SC-1..................................................................... 116

1-800-227-1171 | trescolighting.com

183

184

1-800-227-1171 | trescolighting.com

185

186

1-800-227-1171 | trescolighting.com

187

1-800-227-1171 | trescolighting.com