Purpose built for the application
Installation from the vertical to the horizontal
Pneumatic or electrical operating mechanisms
Choice of blades
Tested to BS7346 and EN12101-2
standard
Eura Louvred ventilation The optimum bladed ventilator for roof or vertical applications.
Airvent
Eura
louvre
Blades, choice of:
The Eura louvre ventilators are designed for the natural extraction of heat, smoke and fumes. The low
Mill finish aluminium as standard
silhouette ventilator is ideal for low pitched roofs.
Twin/Triple wall translucent polycarbonate
The ventilator can also be mounted in the vertical to provide low level fresh air.
Georgian wired glass, 6mm Laminated/toughened glass, 6mm
Ventilators are manufactured from corrosion
Insulated blades
resistant aluminium A1Mg3 with the overlapping
Insulated blades and frame.
blades connected to the body of the ventilator via a completely accessible link bar. Ventilator bases are
Installation can be from the vertical to 5o from the horizontal.
fully welded with the flanges profiled to fix directly to
Birdguards, flyscreens or burglar bars can be included as an optional extra.
are incorporated to achieve maximum discharge. A
Polyester paint finish from RAL standard colour range is an optional extra.
mechanisms are available and a fusible device is
sheeting, curbs, glazing and brickwork. Wind spoilers wide variety of pneumatic and electric operating optional. The Eura louvre has been independently tested to meet the requirements of EN12101-2 and also complies with BS7346:Part 1:1990. Weather tested for watertightness and wind resistance performance by a third party certification to both EN & BS standards.
LONGTITUDINAL SECTION
TRANSVERSE SECTION
Purpose built for the application
Installation from the vertical to the horizontal
Pneumatic or electrical operating m e cha nism s
Paint or anodise to full range of colours
Tested to BS7346 and
Choice of blades
EN12101-2
standard
Low silhouette
Northern Office North East of England Business & Innovation Centre, Wearfield, Sunderland SR5 2TA Tel: +44 (0)191 516 6253 Fax: +44 (0)191 516 9448
Airvent Systems Services Ltd Systems House, Lamby Industrial Park, Wentloog Ave, Cardiff CF3 2EX Tel: +44 (0)29 2077 6160 Fax: +44 (0)29 2077 6161 Email: marketing@airvent.co.uk www.airvent.co.uk
Southern Office Ground Floor Offices, Spectrum House Terminus Road Industrial Estate Chichester PO19 8UE Tel: +44 (0)124 353 8333 Fax: +44 (0)124 353 8555
History: Introduction to Airvent Systems & Services Three Divisions a) Systems – Provide a professional service facility for smoke ventilation from conception to completion including DESIGN – SUPPLY – INSTALLATION – COMMISSIONING. We will be responsible for: Design Regulatory compliance Working drawings Suitability of products Successful installation Commissioning b) Services – Market leader in Whole Life Support, 24/7, 365 days a year c) Car Park Division
In 2004 Airvent were acquired by CRH Plc – a €12 billion turnover organisation. Airvent supply the Group’s smoke & natural ventilators (part of the CRH Group) from a 13,000m2 factory in the Netherlands. In Europe, the glass, fire and safety group has 1,500 employees. The manufacturing plant for smoke & natural ventilators has an on time performance of 98.3%. There is over 100 years of experience on design, installation and commissioning of natural and powered smoke ventilation schemes.