S201 Bulletin

Bulletin 71.1:S200 March 2006

S200 Series Pressure Reducing Regulators

Wide Variety of Body Materials and End Connections Styles Available

Fixed Factor / PFM Accuracy

TYPICAL S200 SERIES REGULATOR

On / Off Fast Acting Loads

Commercial / Industrial Service

S200 SERIES REGULATOR WITH -TRUE" MONITOR

Optional Internal Relief

Optional "True" Monitor S200 SERIES REGULATOR WITH INTEGRAL SLAM-SHUT DEVICE

:FISHER'

Optional Integral Slam-Shut Device

www.emersonprocess.comiregulators

EMERSON Process Management

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Introduction The quick reacting S200 Series pressure reducing service regulator is typically used in an industrial or commercial installation to minimize the shock effect of sudden downstream load changes that might otherwise activate safety shutoff equipment. In such an installation where gas consumption varies from almost nothing to several thousand standard cubic feet per hour (SCF11) (or normal cubic meters per hour (Nm /h) snap acting solenoid valves can cause sudden load changes The resulting shock pressures and regulator instability can cause safety equipment to shut the installation down But with an S200 Series regulator transmission of shock loads to downstream equipment is reduced thereby helping maintain downstream pressures within desired limits The S200 Series regulators are available in several different configurations to meet the demands of varying services and overpressure protection requirements rach configuration is made up of different construction features The following section describes the available construction features

Outlet PressuresThe S200 Series has a wide range of outlet pressure settings from 2-inches w.c. to 10 psig (5 mbar to 0,69 bar).

Fixed Factor Billing / PFM ApplicationsThe S200 Series can maintain outlet pressure accuracy for applications that require downstream pressure to be held within Âą 1 % absolute pressure. See tables 7 through 11.

Internal Relief Valve The Types S202, S202H, S202P, S206. S206H, and S209 have internal relief across the diaphragm to help minimize overpressure.

INLET PRESSURE

II OUTLET PRESSURE 1-7 ATMOSPMERIC PRESSURE

Figure 2. Type S201 Regulator (Basic 5200 Series Construction)

2

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Application FlexibilityA wide variety of sizes. body materials and end connection styles available: 1-114-inch. 1-1/2-inch, and 2-inch (DN 32. 40 and 50) body sizes available in ductile iron. steel, and cost effective cast iron available with NPT. BSP, ANSI Class 125 flat-face (available with 7.5-inch or 10-inch (191 or 254 mm) face-to-face dimensions), ANSI Class 150 raised-face, ANSI Class 250 raised-face, ANSI Class 300 raised-face, and PN 10-16 end connections. (Not all sizes and/or materials are available with all end connections. See tables 1 and 2 for available configurations.)

Integral Slam-Shut DeviceThe S200 Series can be configured with a Type VSX-2 integral slam-shut device to provide Overpressure Shutoff (OP SO) or Over (OPSO) and Underpressure Shutoff (UPSO).

"True" MonitorThe S200 Series can be configured with an integral monitor, which functions independently from the main regulator to limit downstream pressure.

OrificeSeveral choices of orifice sizes to accommodate wide range of flows and inlet pressures.

RetrofittableThe S200 Series and 7-the 299H Series use the same body and

orifices. As a result, the S200 Series can easily be upgraded to a 299H Series without removing the regulator body from the pipeline.

Easy InspectionThe S200 Series uses a rugged two-bold actuator to body connection. which allows the easy and reliable access to the orifice and seat disk for inspection.

3

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Specifications Available Constructions (See table 1) Type S201: Basic construction without internal relief for 2 to 30-inches w.c. (5 to 75 mbar) outlet pressures Type S201H: Type S201 with a heavy diaphragm plate for 1 to 5 psig (0,07 to 0,35 bar) outlet pressures Type S201K: Type S201 with a heavy diaphragm plate for 2 to 10 psig (0,14 to 0,69 bar) outlet pressures Type S201P: Type S201 with downstream control line connection and 0-ring stem seal for external pressure registration Type S201PK: Combination of Types 5201K

and 5201P Types S202, S202H, S202P: Types S201, S201H, and S201P constructions with internal relief Types S203, S203H, S203P: Types S201, S201H, and S201P constructions with "True" monitor regulator to provide overpressure protection.

Available in Cast iron body only.

Types S204, S204H: Types S201 and 5201H constructions with a low outlet pressure shutoff.

Available in Cast iron body only.

Types S206, S206H: Types S202 and S202H constructions with a low outlet pressure shutoff with internal relief. Available in Cast iron body only.

Types S208, S208H, S208P, S208K, S208PK: Types S201, S201H, S201P, 5201K, and S201PK constructions with a Type VSX-2 slam-shut device to provide overpressure (0P50) or over and underpressure (UP50) protection. Available in Ductile iron body only.

Types S209, S209H, S209P: Types S202, 5202H, and S202P constructions with a Type VSX-2 slamshut device to provide overpressure (OPSO) or over and underpressure (UPSO) protection.

Available in Ductile iron body only.

Body Sizes and End Connection Stylesto See table 2

Minimum and Maximum Inlet Pressuresto Maximum Emergency (Body Rating) Inlet Pressure: 175 psig (12,1 bar) Maximum Operating Inlet Pressure: See table 4 Types S204 and S206 Minimum Inlet Pressure Required to Prevent Shutoff: See figure 10 Maximum Outlet Pressure (Casing)to 15 psig (1,03 bar)

Maximum Operating Outlet Pressure to Avoid Internal Part Damageto Light Diaphragm Plate: 2 psi (0,14 bar) above

Outlet Pressure Ranges See table 3

Integral Monitor Performance See table 5 and figure 8

Internal Relief Performance Internal relief valve opens at 7 to 28-inches w.c.

(17 to 70 mbar) above outlet setting, depending on control spring: also see figure 6

Type VSX-2 Trip Pressure Ranges See table 6

Capacities See tables 7 through 11

Flow Coefficients and Orifice Diameters See table 4

Construction Materials S200 Series Main Valve and Actuator Body: Cast iron, Ductile iron, or Steel: Refer to table 1 for available constructions Spring Case, Lower Diaphragm Casing, Union Ring, Orifice, and Disk Holder(s): Aluminum Disk(s), Diaphragm(s), and 0-ring(s): Nitrile or Fluoroelastomer Closing Cap Gasket: Neoprene Monitor Regulator Piston Ring: Graphite Stabilizer Vent Flappers: Nylon Type VSX-2 Slam-Shut Device Upper and Lower Casing: Aluminum Valve Plug: Nitrile plug and Aluminum stem Diaphragm and 0-rings: Nitrile Closing Cap: ABS plastic Reset Button: Brass

Maximum Temperature Capabilitiesto Nitrile (NBR): -20° to 150°F (-29° to 66°C) Fluoroelastomer (FKM): 0° to 200°F (-18° to 93°C) (Upper temperature limitation due to nylon flappers) Type VSX-2: -20° to 140°F (-29° to 60°C)

Spring Case Vent Locations and Pressure Connections See figures 12 and 13

Approximate Weight 28 pounds (12,7 kg)

Options 1/8-inch NPT inlet test pressure connection TFE diaphragm protector

outlet pressure setting Heavy Diaphragm Plate: 3 psi (0,21 bar) above outlet pressure setting 1

The pressure/temperature limits in this bulletin or any applicable standard limitation should not be exceeded

4

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 1. Available Constructions TYPE NUMBER

x

CONSTRUCTION FEATURES

a.

a.

(.1)

(.1)

x

a.

(.1)

(.1)

x

a.

(.1)

(.1)

x

x

a.

a.

(.1)

(.1)

x

a.

(.1)

(.1)

S S 5 o o g cCi cCi 2 o 2 o X 48 48 o o o o o o o 8 C,INCJC.INCJNCJCJCJCJC.INCJCJCJCJCJCJCJCJCJC.1 (.1)

Light diaphragm plate

(.1)

(.1)

X

Heavy diaphragm plate

(.1)

X

X

X

Either light or heavy diaphragm plate depending on outlet pressure range

X

X X

x

Internal registaton

X

X

0-ring stem seal and downstream control line connect on

X X

X

X

Internal relief Full

X

X

(.1)

(.1)

(.1)

X X

(.1)

(.1)

(.1)

X

X

X

X X

X

X

X

X

X

X

X

X X

X

""True"" monitor

X

X

X

Low outlet pressure shutoff

X

X

X

X

x

X

X

x

X X

X

x

x

Internal relief Token

(.1)

X

x

x

X

(.1)

X

x

X

External registaton

(.1)

X

x

x

X X

X

X

X

Type VSX-2

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

BODY MATERIALS Cast Iron

X

X

X

X

X

X

X

X

Ductle Iron

X

X

X

X

X

X

X

X

Steel

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

Table 2. Body Sizes and End Connection Styles END CONNECTION STYLE

BODY SIZE, INCHES (DM

Cast Iron NPT, BSP NPT, BSP

1- 114(32) 1 -112 (40)

1-1/2 x 2 (40x 50) 2 (50) 1

NPT, BSP, or ANSI Class 1250) FF, 250 RF flanged

Ductile Iron

Steel

NPT, BSP NPT, BSP

NPT, BSP

NPT BSP, ANSI Class 125 FF or 250 RF flanged, or PN 10-16 flanged

NPT BSP, ANSI Class 150 RF or 300RF flanged, or PN 10 -16 flanged

This flange is available with a fac e4o-face of 7 5-inches (191 mm) or 10-inches (254 mm

Table 3. Outlet Pressure Ranges TYPE NUMBER

5201, S202, 52030), 5208, S209, 5201P, 5202P, 5203P, 5208P, and 5209P

Part Number

Color Code

2 to 4 5-inches w c (5 to 11 mbar)r .-.))

3 5 to 6 5-inches w c (9 to 16 mbar) 5 to 9-inches w c (12 to 22 mbar) 8 5 to 1 8-inches w c (21 to 45 mbar) 14 to 30-inches w c (35 to 75 mbar)

1D892527022 1D892 627022 1D892 727012 1D893227032 1D893327032

Brown

3 5 to 5-inches w c (9 to 12 mbar)(4 5 to 7-inches w c (12 to 17 mbar) 6 5 to 9 5-inches w c (16 to 23 mbar) 8 5 to 1 8-inches w c (21 to 45 mbar) 14 to 30-inches w c (35 to 75 mbar)

1D892 527022 1D892627022 1D892 727012 1D893227032 1D893327032

Black Gray Dark Green

5 6 7

1 to 2 psig (0,069 to 0,14 bar) 1 5 to 3 25 psig (0,10 to 0,22 bar) 2 to 5 psig (0,14 to 0,34 ball+)

1H975827032 1H975927032 1P6154271 42

Dark Blue Orange Yellow

8 9

2 to 5 5 psig (0,14 to 0,38 bar) 4 to 10 psig (0,28 to 0,69 bar)

0Y066427022 1H8024000A2

Green Stripe Unpainted

1 to 2 psig (0,069 to 0,14 bar) 1 5 to 3 25 psig (0,10 to 0,22 bar)

1H975827032 1H975927032

Dark Blue Orange

1

2 3 4

5204 and 5206

5201H, 5202H, 52 03H0), 5208H, 5209H, 5201P0), 52021:44), 5203P(4),

5204H, 5206H, 5208130), and 5209P(4) S201 K, 5201PK,

5208K, and 5208PK

CONTROL SPRING

OUTLET PRESSURE RANGE

SPRING NUMBER

5204H and 5206H

Red

Black Gray Dark Green Brown Red

Types e20,3 and e203H outlet pressure ranges are a function of the monitor construction (monitor spring and the number of spr ng seats used eee table 5 for more information If insta led so control spring is on bottom, lower end of outlet pressure range can be reduced by 1-inch w c (2, mbar) for regulator with light diaphragm plate or 2-inches we (5 mba)for regulator with heavy diaphragm plate 3 Not available with Types ea* and e2o9 4 Types 째2o1 P, 째202P, e21x3P, e 20BP, and e209P require heavy daphragm plate for outlet pressures over 1 psig (0,069 bar) 1

2 With regulator installed so control spring is on top of diaphragm

Not available for Types e21x3P, e 204H, and ,S2061-1

5

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 4. Additional Specifications

TYPE NUMBER

S201, S201 P S202 S202 P.

S203 S203P S208 S208P S209 S209P

S201H, S201P,

S202H S202P S203H S203P

OUTLET PRESSURE SETTING

2 to 30-inches w c (5 to 75 mbar)

1 to 3 25 psig (0.069 to 0.22 bar)

125 (8.6) 125 (8.6) 100 (6.9) 60 (4.1) 25 (1.7) 13 (0.90)

53 110 190 415 700 910

1 51

53 110 190 415 700 910

1 51

1-3/16 (30.2)

125 (8.6) 125 (8.6) 100 (6.9) 60 (4.1) 30 (2.1) 14 (1.0)

1-3/16 (30.2)

20 (1.4)

910

26

1/4 (6.4) 3/8 (9.5) 1/2 (12.7) 3/4 (19.1)

125 (8.6) 125 (8.6) 100 (6.9) 60 (4.1) 30 (2.1)

53 110 190 415 700

1 51

910

26

38 115

1 09

230 625 835

6 57 17 9

38 115

1 09

230 625 835

6 57 17 9

1/4 (6.4) 3/8 (9.5) 1/2 (12.7) 3/4 (19.1) (25.4)

1/4 (6.4) 3/8 (9.5) 1/2 (12.7) 3/4 (19.1) 1

All outlet pressure setbngs

1

2 to 5 5 psig (0.14 to 0.38 bar)

4 to 10psig (0.28 to 0.69 bar)

S206

WIDE-OPEN C,,

1

2 to 5 psig (0.14 to 0.34 bar)

S204

WIDE-OPEN C

1-3/16 (30.2)

S208H, S208P, S209H, S209P

S201K, S201PK S208K S208PK

MAXIMUM OPERATING INLET PRESSURE TO OBTAIN OPTIMUM PERFORMANCE, PSIG (bar)

ORIFICE SIZE, INCHES (mm)

3 5 to 30-inches w c (9 to 75 mbar)

(25.4)

(25.4)

1-3/16 (30.2)

20 (1.4)

1-3/16 (30.2)

25 (1.7)

3/8 (9.5) 1/2 (12.7) 3/4 (19.1)

100 (6.9) 100 (6.9) 75 (5.2) 30 (2.1) 15 (1.0)

1

(25.4)

1-3/16 (30.2)

S204H S206H

1 to 3 25 psig (0.069 to 0.22 bar)

3/8 (9.5) 1/2 (12.7) 3/4 ( 19.1) 1 (25.4)

1-3/16 (30.2)

100 (6.9) 100 (6.9) 75 (5.2) 30 (2.1) 15 (1.0)

C,

314 5 43 11 9 20 26

314 543 11 9 20 26

314 5 43 11 9 20

35

329

239 329

239

Construction Features Heavy-Duty Construction for Higher Outlet Pressures An S200 Series regulator with an H or K (figure 3) in the type number can deliver air or gas at a higher outlet pressure setting than the basic Type S201 (see table 3).

S200 Series regulators with an H or K in the type number have a heavy diaphragm plate, while most other S200 Series

regulators have a light diaphragm plate. However, a regulator with a P in the type number will have a light diaphragm plate for outlet pressure ranges under 1 psig (0,069 bar) and a heavy diaphragm plate outlet pressure ranges over 1 psig (0,069 bar).

Downstream Control Line Connection An S200 Series regulator with a P or a PK in the type number has a blocked turbo-booster tube, an 0-ring stem seal, and a 3/4-inch NPT control line tapping in the lower diaphragm casing. A regulator with a downstream control line is used for monitoring installations or other applications where there is other equipment installed between the regulator and the pressure control point. The 0-ring stem seal helps separate body pressure from diaphragm case pressure on monitor installations where leakage cannot be tolerated.

6

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 CD

1.FAVY CIAPI.RACM PLATF

WEFT PRFSSURF OUTLFT PRFSSURF

r-1 ATMOSPhFRIC PRFSSURF

Figure 3. Type S201PK Regulator with Heavy Diaphragm Plate for Higher Outlet Pressures

PLOCKFI; THROAT

INLET PRESSURE

11\

EXTERNAL CONTROL LINE CONNECTION

1=1 OUTLET PRESSURE I-1 ATMOSPHERIC PRESSURE

Figure 4. Type S201P Regulator wrth Downstream Control Line Connection

7

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Internal Relief Several S200 Series regulators have relief across the diaphragm (figure 5) to help minimize overpressure Any outlet pressure above the start-to-discharge point of the nonadjustable relief spring moves the diaphragm off the relief seat, allowing excess pressure to bleed out through the screened stabilizer vent

For extra protection should emergency conditions exist which prevent normal operation of the regulator (for example, linkage becoming disconnected or disk broken off), the relief stern contacts the underside of the closing cap, limiting the rise of the relief Since the diaphragm continues to rise as downstream pressure builds, it lifts off the relief thereby opening the valve to provide relief operation

INLET PRESSURE

7-1 OUTLET PRESSURE ATMOSPHERIC PRESSURE

Figure 5. Type S202 Regulator with Internal Relief

PORT DIAMETER, INCI-ES (mm)

CURVE

A

1/4 (6,4) (9,5) 1/2 (12,7)

B C

318

(19,1) (25,4) 1-3116 (30.2) 314

D E

1

F

INLET PRESSURE. bar 0

INLET PRESSURE. bar

4

3

6

3.0

1

0 a. c

0 2.S

5 to .3

CZ

2.0

u

2

3

4

7.0

63 6.0

cr

E

e

sS

째

S.0

1.S

10

8t

O1

$-

c.. z

g

OS

e-

4S

40

0 10

20

30

40

SO

60

70

80

90

INLET PRESSURE. PSIG

7 INCHES W C (17 rrbar) TYPE S202 OR S206 REGULATOR WITH SEAT BLOCKED OPEN BY TWO 1:8 INCH (3.2 mm) DIAMETER WIRES

1:014/..

AZ/ 11

INLET PRESSURE PSIG

S PSIG (0.34 bar) TYPE S2021.1 REGULATOR WITH SEAT BLOCKED

OPEN BY ONE lid-INCH (3.2 win) DIAMETER WIRE

Figure 6. Internal Relief Performance for Types S202, S20214, and S206 Regulators Venting Directly to Atmosphere

8

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200

OPP. TV.R OAT

INTERNAL TOKEN REUEF MON ITOR

SFNSINC TUPF

GOUPLF KNIFF FCCF ORWICF

MONITOR SENSING CLAPHRAGM

(SFT SLIGHTLY ABOVE WIN VALVF

srmoiro)

-TRUE" MONITOR THROTTLES INDEPENDENTLY FROM THE MAIN REGULATOR

INLET PRESSURE SFT SPRINC

OUTLET PRFSSURF ATMOSPHERIC PRFSSURF

Figure 7. Type S203 Regulator with -True Morntor

"True" Monitor The Types S203 S2031 I and S203P are available with a "True" monitor regulator, which is integral yet acts independently of the main regulator The monitor provides equivalent overpressure protection when compared to a standard two regulator monitor setup If one regulator fails the other regulator provides control and overpressure protection The monitor construction provides the following important features.

Designed to Meet or Exceed Applicable Requirements of DOT 192.197 In DOT 192 197 paragraph "b- which states or if the gas contains material that seriously interferes with the operation of service regulators there must be suitable protective devices to prevent unsafe overpressuring of the customer's appliances if the service regulator fails The Type S203 is designed to address the above issue and other common types of failures found in service regulators, such as lever arm, pusher post, and stem failures

Minimizing of Hazardous Venting Required relief capacity is cut down without restricting total regulator capacity The internal token relief and monitor work in combination to limit relief discharge to atmosphere The internal token relief also acts as an alarm to indicate when the monitor is operating Lower Controlled Downstream Pressure

In the

event of regulator failure, the monitor regulator limits downstream pressure

All-Dynamic Operation with Automatic Reset The monitor diaphragm and piston are in motion under normal operating conditions prepared to provide overpressure protection when needed No manual reset procedure is required to return the regulator to normal operation after relief of the overpressure condition

As downstream pressure registers under the main diaphragm, it also registers on top of the monitor diaphragm through the pitot tube located near the body outlet Under normal conditions as downstream pressure fluctuates due to load changes, the main regulator disk and the monitor piston move toward or away from the orifice

9

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 5. Integral Monitor Data

CONTROL SPRING TYPE PART NUMBER AND NUMBER COLOR (SEE TABLE 3 FOR RANGE)

S203, S203P

OUTLET PRESSURE RANGE

1D892527022, brown

0 to 5-inches w c

1D 892627022, red / 1D892727012, black

4 to 9 5-inches w c

(10 to 24 mbar)

1D893227032, gray

8 to 14-inches w c 8 to 12-inches w c 10 to 20-inches w c 11 to 21 inches w c

(20 to 35 mbar) (20 to 30 mbar) (25 to 50 mbar) (27 to 52 mbar)

14 to 28-inches w c (35 to 70 mbar) 18 to 33-inches w c (45 to 82 mbar) 0 5 to 1 0 psig (35 to 70 mbar)

1D893327032, dark green

S203H, S203P

(0 to 12 mbar)

MAXIMUM DOWNSTREAM PRESSURE WITH INTEGRAL MONITOR IN OPERATION, PSIG (bar)

MAXIMUM FLOW THROUGH INTERNAL RELIEF VALVE WITH INTEGRAL MONITOR IN OPERATION, SCFH (NmYhy II

0 8 (0,06)

RELIEF MONITOR SPRING PART NUMBER AND COLOR

NUMBER OF SPRING SEATS REQUIRED

950 (25,5)

1L255727132, green

0 1

(-)

(r4)

1000 (26,8)

1L255727132, green

(-)

(r4)

1 4 (0,10) 1 8 (0,12) 2 2 (0,15)

1200 (32,2) 1350 (36,2) 1600 (42,9) 1800 (48,2)

1L255727132, green 1L2558271 32, red 1L2558271 32, red 1L255927132, blue

2 0

2 8 (0,19) 3 0 (0,21) 3 0 (0,21)

1900 (50,9) 2000 (53,6) 2200 (60,0)

1L2558271 32, red 1L255927132, blue 1V224227012, silver

2

1

0

1

0

1H975827032, dark blue

1 0 to 1 6 psig (70 to 110 mbar) 0 75 to 1 6 psig (52 to 110 mbar)

3 8 (0,26) 4 0 (0,28)

2200 (60,0) 2500 (67,0)

1L255927132, blue 1V224227012, silver

2

1H975927032, orange

1 25 to 2 25 psig (86 to 155 mbar) 1 25 to 3 25 psig (86 to 224 mbar)

5 0 (0,35) 6 0 (0,41)

3000 (80,4) 3000 (80,4)

1V224227012, silver 1V224227012, silver

2 3

1

1 Flow of 0 6 specific gravity natural gas in eCFH at 60-F and 117 psia and Nr&M at VC and 0,01325 bar 2 eee figure 6 for specific performance curves by port diameter

CURVE

A

PORT DIAMETER, INCHES (mm) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)

B C

3/4 (19,1) 1 (25,4) 1-3/16 (30,2)

D E

F

INLET PRESSURE, bar 0

4

3

Cu

INLET PRESSURE, bar

5

T

T

eW

T

8

50

125

A, B D

40

100 C

100

20

40

60

80

100

120

125

INLET PRESSURE, PSIG

WITH CONTROL SPRING 11)892627022 OR 11)892727012, MONITOR SPRING 1L255727132, AND 1 SPRING SEAT

30

75

20

50

10

2

a

eb

loo

INLET PRESSURE, PSIG

1 o

25

125

WITH CONTROL SPRING 11)893227032, MONITOR SPRING 1L25572713Z AND 2 SPRING SEATS

Figure 8. Integral Monitor Performance for Type S203 Regulator Blocked Wide Open and Venting Directly to Atmosphere

10

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 LOW OUTLET PRESSURE SHUTOFF

INTERNAL RELIEF

INLET PRESSURE OUTLET PRESSURE ATMOSPHERIC PRESSURE

F11

Figure 9. Type S206 Regulator with Low Outlet Pressure Shutoff and Internal Relief FLOW RATE. Pim 'ill OF 0 6 srFcinc GRAVITY NATURAL GAS 26.8

S3.6

80.4

107

134

160

188

internal relief valve closes, automatically allowing normal operation again

214

3.0

2.0

IL

IL 1.0 Se

z

3 1000

2000

3000

4000

S000

6000

7000

FLOW RATE, SCFH OF 0 6 SPEC IF lc GRAVITY NATURAL GAS NOTE* SEE CAPACITY INFORMATION FOR CONVERSION TO EOUNALENT CAPACITIES OF OTHER GASES

Figure 10. Minimum Inlet Pressure Required to Prevent Shutoff on all Sizes of Types S204. S20414. 5206. and 5206H Regulators at Indicated Flow

If downstream pressure begins to increase due to main regulator failure, and if the downstream pressure increases to 7 to 28-inches w c (17 to 70 mbar) above set pressure, the internal relief valve begins to open to limit downstream pressure At the same time, the increasing pressure is sensed on the monitor diaphragm (see figure 7) causing the monitor piston to move towards the orifice to restrict the flow through the regulator to limit the downstream pressure While the monitor is in operation, regardless of the downstream demand the token internal relief valve will continuously operate due to the engineered bleed in the monitor piston This bleed allows a minimal amount of fbw to exhaust to atmosphere to notify the user that the regulator is operating in monitor mode

As downstream pressure drops back to normal, the piston moves back away from the orifice and the

The combination of a restriction in the internal relief valve and the monitor piston positioned near the inlet side of the orifice limits the maximum downstream pressure and the related flow through the internal relief valve to the values shown in table 4 and figure 7

Low Outlet Pressure Shutoff On installations requiring a minimum outlet pressure the Types S204 and S206 regulator (figure 9) and the Types S20411 and S20611 regulator with low outlet pressure shutoff shuts the regulator off if the required minimum outlet pressure cannot be maintained With the fbw shut off the possibility of gas accumulation downstream of the regulator is minimised As downstream pressure drops under high demand or because the inlet pressure is too low, the diaphragm drops to its lowest position and the main disk moves to its farthest position from the orifice This allows the spring in the back disk assembly to scat the back disk against the orifice and shut off flow This condition is maintained until the regulator is manually reset by pulling upward on the pusher post extension in the spring case

Type VSX-2 Slam-Shut Device The Type VSX 2 slam shut device on the Types S208 and S209 regulators is a fast acting shutoff valve which provides overpressure (OPSO) or over and underpressure (UPSO) protection by completely shutting off the fbw of gas to the downstream system The shutoff module's actions are independent of the Types S208 and S209 regulators

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200

'Nue

111=1.

Y

IIM=11C...

if

kik V-7.11

-

SSW

111021

fl TYPE 5209

TYPE S208

TYPE VSX-2 WITH INTERNAL REGISTRATION

TYPE VSX-2 WITH EXTERNAL REGISTRATION INLET PRESSURE OUTLET PRESSURE

ATMOSPNEFIC PRESSURE

Figure 11. Type S208 Regulator with Type VSX-2 Slam-Shut Device (right) and Type S209 Regulator with Slam-Shut Device and Internal Token Relief (left) Table 6. Type VSX-2 High and Low Trip Pressure Ranges SETPOINT RANGES

Overpressure Shutoff (OPSO)

SLAM-SHUT TYPE

LP

USE WITH MAIN VALVE SPRING NUMBER1A

TYPE VSX-2 SPRING PART NUMBER

SPRING COLOR

SPRING FREE LENGTH, INCHES (mm)

SPRING WIRE DIAMETER. INCHES (mm)

1.2

12 to 25- inches w c (30 to 63 mbar)

T14162T0012

Black

315 (80)

0 067 (1,7)

1. 2. 3. 4

20 to 52-inches w c (50 to 130 mbar)

T14163T0012

Brown

315 (80)

0 080 (2.0)

3. 4, 5. 6

1 4 to 3 9 psig (97 to 270 mbar)

T14164T0012

Red

315 (BO)

0 091 (2,3)

3 8 to B 7 psig (262 to 600 mbar)

T14165T0012

Orange

315 (80)

0 120 (3.0)

5 8 to 16 psig (400 to 1103 mbar)

T14166T0012

Pink

315 (BO)

0 138 (3.5)

5, 6. 7. 8. 9 9

Underpressure Shutoff (UPSO)

MINIMUM TO MAXIMUM TRIP PRESSURE

2. 3

2 to 12-inches w c (6 to 30 mbar)

TI 4168T0012

White

315 (BO)

0 043 (1,1)

3, 4, 5. 6

4 to 30-inches w c (10 to 75 mbar)

TI 4169T0012

Blue

315 (BO)

0 055 (1,4)

LP

5. 6. 7. 8

036 to 2 3 psig (25 to 160 mbar)

TI 4170T0012

Silver

315 (BO)

0 067 (1.7)

7. 8, 9

1 5 to 10 a psig (103 to 750 mbar)

T14171T0012

Olive

315 (80)

0 125 (3.2)

See table 3 for man valve spring number 2 For dher wing comboations contact your Fisher Sales Representative or Sales Office Trip pressures 2 or 3 psig (0.14 or 021 bar) over set pressure may resut ri internal parts damage 1

12

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 and of variations to the inlet pressure. The Type VSX-2 has internal or external registration. External registration requires a downstream sensing line.

The shutoff disk is held in the open position (reset position) by a small ball holding the disk stem. If the pressure below the diaphragm increases (or decreases) reaching the Type VSX-2 setpoint, the diaphragm will travel upwards (or downwards) operating a lever which in turn releases the ball.

Once the ball is released, the spring force on the stem will push the stem and disk against the seat, shutting off all gas fbw. The manual reset has an internal bypass to equalize the reset pressure on either side on the shutoff disk.

Capacity Information Tables 7 through 11 give the natural gas regulating capacities of S200 Series regulators at selected inlet pressures and outlet pressure settings. Flows are in SCFH (60째F and 14.7 psia) and Nm3/h (0째C and 1,01325 bar) of 0.6 specific gravity natural gas. To determine equivalent capacities for air, propane, butane, or nitrogen, multiply the SCFH table capacity by the following appropriate conversion factor: 0.775 for air, 0.628 for propane, 0.548 for butane, or 0.789 for nitrogen. For gases of other specific gravities, multiply the given capacity by 0.775, and divide by the square root of the appropriate specific gravity.

For Critical Pressure DropsUse this equation (absolute outlet pressure equal to one-half or less than one-half the absolute inlet pressure).

Overpressure Protection The S200 Series regulators have outlet pressure ratings that are lower than their inlet pressure ratings. A pressure relieving or pressure limiting device is needed for Types S201, S201H, S201K, S201P, S201PK, S204, and 5204H if inlet pressure can exceed the outlet pressure rating, since these regulators do not have internal relief, high outlet pressure shutoff, or integral slam-shut device.

Type S202, S202H, S202P, 5203, 5203H, or S203P, Types S206 and 5206H have internal relief or relief monitoring to provide partial capacity relief, limiting total outlet pressure as shown in figures 6 and 8.

This partial internal relief may be adequate: if not, an additional pressure relieving or pressure limiting device should be installed downstream.

Types S208 and S209 regulators rely on the Type VSX-2 slam-shut device for overpressure protection. The Type VSX-2 will shut the system down until the problem can be rectified and the Type VSX-2 is reset. Type S209 regulators have internal relief which provides token capacity relief for thermal expansion.

Overpressuring any portion of a regulator or associated equipment may cause personal injury, leakage, or property damage due to bursting of pressure-containing parts or explosion of accumulated gas. Provide appropriate pressure relieving or pressure limiting devices to ensure that the limits in the Specifications or table 4 are not exceeded. Regulator operation within ratings does not prevent the possibility of damage from external sources or from debris in the pipeline.

Refer to the relief sizing coefficients and the Capacity Information section to determine the required relief valve capacity.

Q = Pi (abs)Cg (1.29)

For Non-Critical Pressure DropsUse this equation

)

(absolute outlet pressure greater than one-half of absolute inlet pressure):

Q=

520 C P ISIN

GT

g

Ci

DEG

Pi

where:

Q= gas fbw rate, SCFH C

g

= gas sizing coefficient

P1 = absolute inlet pressure, psia G= specific gravity of the gas T= absolute temperature of gas at inlet, 째Rankine C1 = flow coefficient AP = pressure drop across the regulator, psi

Installation These regulators may be installed in any position. If gas escaping through the internal relief valve could constitute a hazard, the vent must be piped to a location where escaping gas will not be hazardous. In this case, obstruction-free tubing or piping of at least the same diameter as the vent size with a minimum number of bends should be used, and a screened vent should be installed on the end of the vent pipe. On all installations, the vent or the end of the vent pipe must be protected from anything that might clog it.

Ordering Information Refer to the Specifications section on page 4 and to each referenced table. Then, complete the Ordering Guide on pages 30 and 31.

13

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 7. Types S201. S202. S203, S208. and S209 Flow Capacities OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY 4-inches w c (10 mbar)

CAPACITIES IN SCFH (Nrn 1h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE. PSIG (bar)

or

1D892627022 1-inch w c (2.5 mbar) droop 2-inches w c (5 mbar) boost

Orific* Sin. Inch 1/4 (6.35)

3/8 (9.52)

1/2 (12.7)

0 4 (0.028) 0 5 (0.034)

1D892727012 1 -inch ve c

(2,5 mbar) droop 2-inches w c (5 mbar) boost

1400 (37.5) 1600 (42.8)

1600 (42.8)

2700 (72.4) 3200 (85.8) 3800 (102)

2500 (67,0)

1 5 (0.10) 2 (0.14)

2500 (67,0) 2800 (75.0)

300 0 (80.4) 350 0 (93.8)

5 (0.34) 13 (0,90) 25 (1,72)

11 50 (30.8)

22 00 (58.9) 36 00 (96.4)

3300 (88.4)

530 0 (142)

1600 (42.8) 2550 (68.3)

5000 (134)

60 (4.14) 100 (6.90) 125 (8,62)

4750 (127) 6650 (178) 6950 (186)

7350 (197)

4500 (121) 7000 (188) 8950 (240)

51 00 (137)

7050 (189)

5600 (150)0)

7300 (196) 8300 (222)

52 00 (139)0)

62 00 (166)

800 (21.4) 1050 (28.1) 1300 (34.8)

11 00 (29.5)

2 (0.14)

400 (10.7) 500 (13.4) 600 (16.1)

5 (0.34) 13 (0.90) 25 (1.72)

950 (25.5) 1600 (42.8) 2200 (58.9)

21 00 (56.3) 22 00 (58.9) 52 00 (139)

32 00 (85.8)

60 (4.14) 100 (6.90) 125 (8.62)

4300 (115)

92 00 (247) 10500 (281) 9800 (263)m

101 00 (271) 92 00 (247)'"

1

(0.07)

1 5 (0.10)

75 00 (201)

9050 (243)

1500 (40.2) 1900 (50.9)

3300 (88.4) 6800 (182)

6000 (161) 900 0 (241)

1800 (482)

6000 (161) 6850 (184)

900 (24.1) 1200 (32.2)

1300 (34.8) 155 0 (41.5)

1450 (38.9) 1750 (46,9)

1900 (50.9) 2300 (61,6)

2300 (61.6) 2800 (75.0) 3300 (88.4)

2500 (67,0) 1800 (48.2) 1800 (48.2)

5100 (137) 8000 (214) 8750 (235)

4500 (121) 8000 (214)

800 (21.4) 1800 (482) 2300 (61.6)

1 500 (402) 2200 (58.9) 2800 (75,0)

1700 (45,6) 2450 (65.7) 2600 (69.7)

3200 (85.8) 5100 (137) 7250 (194)

2750 (73.7) 5150 (138) 7650 (205)

21 00 (56.3)

3350 (89.8) 5800 (155) 84 00 (225)

9900 (265)

700 (18.7) 950 (25.5)

11 00 (29.5)

1 5 (0.10)

400 (10.7) 500 (13.4)

2 (0,14) 5 (0.34) 13 (0.90)

600 (16.1) 950 (25.5) 1600 (42.8)

12 00 (32.2)

1700 (45,6) 2900 (77,7) 3700 (99.2)

1950 (52.3) 3800 (102)

25 (1,72) 60 (4,14) 100 (6.90) 125 (8.62)

21 00 (56.3)

51 50 (138) 92 50 (248) 10000 (268) 1 0800 (289)

71 00 (190) 94 00 (252) 10100 (271)

7950 (213) 10400 (279)

(0,07)

800 (21.4) 850 (22.8)

1500 (40.2)

11 50 (30.8)

1000 (26.8) 1050 (28,1) 1400 (37.5)

12 50 (33.5)

2 (0 .1 4)

450 (12.1) 500 (13.4) 550 (14.7)

1550 (41,5) 1750 (46,9)

1650 (442) 2300 (61,6)

1950 (52.3) 2350 (62.9) 2500 (67,0)

1000 (26.8) 1750 (46,9) 2500 (67.0)

12 00 (32.2)

2050 (54.9)

1D893227032

5 (0.34) 13 (0.90) 25 (1.72)

3050 (81.7) 4750 (127)

42 50 (114)

30 00 (80.4) 61 00 (163)

430 0 (115) 730 0 (196)

4750 (127) 7850 (210)

5650 (151)

8700 (233)

8700 (233)

± 2-inches w c (5 mbar)

60 (4,14)

4750 (127) 7450 (200) 9050 (243)

94 50 (253) 104 00 (279) 1 0450 (280)

9950 (267)

10550 (283)

11-inches w c (27 rnbar) 1D893227032 ± 2-inches w c (5 mbar)

1

14-inches w c (35 mbar)

(0.07)

1 5 (0,10)

100 (6.90)

125 (8.62) 20-in cbes w c (50 mbar)

1D893327032 ± 3 -inches w c

(7.5 nibar)

4400 (118) 73 00 (196)

9050 (243)

2000 (53.6) 3400 (91.1)

1450 (38.9)

61 00 (163)

940 0 (252)

106 00 (284)

111111

500 (13.4) 950 (25.5)

750 (20.1) 1400 (37,5)

1000 (26.8) 2000 (53,6)

1300 (34.8) 2800 (75.0)

1 700 (45,6)

2 (0.14)

300 (8,04) 500 (13.4)

5 (0.34) 13 (0.90) 25 (1,72)

900 (24.1) 1500 (40.2) 21 00 (56.3)

1 700 (45.6) 32 00 (85,8)

2500 (67,0)

42 00 (113)

54 00 (145)

6500 (174)

500 0 (134) 700 0 (188)

5500 (147) 7100 (190)

4700 (126)

7000 (188)

82 50 (221)

9350 (251)

60 (4,14) 100 (6.90) 125 (8.62)

4750 (127)

8900 (239)

106 00 (284)

74 00 (198) 92 00 (247)

105 00 (281) 10950 (293)

99 50 (267) 10800 (289)

1

1

1000 (26.8) 1400 (37.5) 21 00 (56,3)

1

t

1 -3116(30,2)

1200 (32.2) 1600 (42.9) 21 00 (56.3)

0 5 (0.03)

1

1 (25.4)

800 (21,4) 1050 (28,1) 1300 (34.8)

(0.07)

04 (0.028) 05 (0.034) 7-Inches c (17 mbar)

(mm)

3/4(19.1)

400 (10.7) 500 (13.4) 600 (16,1)

1

1D892527022

1-1/2-Inch (DN 40) Body Biz

(0.07)

3100 (83,1)

Liinted clue to boost

1 - Shaded seas show where rdcated droop would be exceeded regarcless of capacity 1 - Shaded seas show where !Immure operatng inlet pressure for a wen port clarrteler is exceeded

continued

14

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 7. Types S201, S202. S203. S208, and S209 Flow Capacities (continued) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

4-inches w c (10 mbar) 1D892527022 or

1D892627022 1-inch w c (2.5 mbar) droop 2-Inches w o (5 mbar) boost

CAPACITIES IN SCFH (Nrnl/h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE. PSIG (bar)

2-Inch (DN 50) Body Sin

()rift* Sin, Inches (mm) 1/4 (6.35)

318 (9.52)

112 (12,7)

0 4 (0.028) 0 5 (0.034) 1 (0,07) 1 5 (0.10) 2 (0.14)

400 (10.7) 500 (13,4) 600 (16,1)

5 (0.34) 13 (0,90)

25 (1,72) 60 (4.14) 100 (6.90) 125 (8.62)

1D892727012 1-inch ye c

(2,5 mbar) droop 2-inches w c (5 mbar) boost

900 (24,1)

(27 mbar) 1D893227032 ± 2-inches w o (5 rnbar)

14-inches w c (35 mbar) 1D893227032 ± 2-inches w c (5 mbar)

1D893327032 ± 3-inches w c (7.5 mbar) 1

1800 (48.2) 2400 (64,3)

2800 (75.0) 3600 (96.5) 4500 (121)

3200 (85.8) 4300 (115) 5500 (147)

3800 (102) 5000 (134) 6400 (172)

1000 (26.8) 1650 (442) 2400 (64.3)

2300 (61.6) 3700 (99.2) 52 00 (139)

3700 (99.2) 6500 (174) 92 00 (247)

7800 (209) 13000 (348) 13000 (348)

9500 (255) 14000 (375) 18000 (482)

12700 (340) 14500 (389)

4450 (119) 5500 (147) 72 50 (194)

9000 (241) 9500 (255) 3900 (105$t)

14550 (390) 12900 (346)m

15000 (402)

950 (25,5) 1500 (40.2)

1400 (37.5) 1800 (482)

1600 (42.8) 2000 (53.6)

1600 (42.8) 2000 (53.6)

2300 (61.6) 31 00 (83.1) 4000 (107)

2800 (75.0) 3600 (96.5) 4500 (121)

3300 (88.4) 4500 (121) 6000 (161)

3500 (93,8) 6400 (172) 10300 (276)

7700 (206) 10000 (268) 20000 (536)

12000 (322) 131 00 (351)

20700 (555)

400 (10.7) 500 (13.4) 600 (16.1)

800 (21.4) 1050 (28.1) 1300 (34.8)

5 (0.34) 13 (0.90) 25 (1.72)

1000 (26.8) 1650 (44.2)

21 00 (56.3)

2400 (64.3)

3500 (93.8) 52 00 (139)

60 (4.14) 100 (6.90) 125 (8.62)

4450 (119) 75 00 (201) 9500 (255)

9000 (241) 10000 (268) 10300 (276)

(0.03) (0.07) 1 5 (0.10)

400 (10.7) 500 (13.4)

750 (20.1) 1000 (26.8)

11 00 (29.5)

2 (0.14) 5 (0.34) 13 (0.90)

600 (16.1) 1000 (26.8) 1600 (42,9)

12 00 (32.2)

1700 (45,6) 3000 (80.4) 62 00 (166)

12 00 (32.2)

2000 (53.6) 3400 (91.1)

1450 (38.9)

800 (21.4) 1800 (48.2) 2500 (67.0) 31 00 (83.1)

7300 (196) 10350 (277)

(1.72) (4,14) (6.90) (8.62)

2400 (64.3)

1 (0.07) 1 5 (0,10)

2 (0.14)

450 (12.1) 550 (14,7) 600 (16.1)

700 (18.8) 850 (22.8) 1000 (26.8)

1100 (29.5) 12 00 (32.2) 1900 (50.9)

5 (0.34) 13 (0.90) 25 (1,72)

1050 (28.1) 1750 (46.9) 2600 (69.7)

1750 (46.9) 3700 (99.2) 5700 (153)

2800 (75.0) 5700 (153)

60 (4,14) 100 (6.90) 125 (8.62)

4800 (129) 7400 (198)

109 00 (292)

(0.07)

300 (8.04) 500 (13.4)

11 50 (30.8)

550 (14,7) 1700 (45.6)

12 50 (33.5)

2 (014) 5 (0.34) 13 (0.90) 25 (1.72)

900 (24,1) 1500 (40.2) 2450 (65.7)

1650 (442) 2550 (68.3) 4850 (130)

21 50 (57.6) 4350 (117) 72 00 (193)

32 50 (87,1)

60 (4,14) 100 (6,90) 125 (8.62)

4900 (131) 7500 (201) 91 50 (245)

94 00 (252) 17400 (466) 5500 (147r)

25 60 100 125

1

20-inches w c (50 mbar)

1700 (45.6) 1300 (34.8) 1700 (45.6) 2200 (58.9)

05 11-inches ye c

1-3116 (30,2)

(29.5) 1400 (37.5)

1 (0.07) 1 5 (0.10) 2 (0.14)

1

1 (25.4)

1600 (42.8) 2200 (58,9)

(322)

11 00

0 4 (0.028) 0 5 (0.034)

7-inches w c (17 mbar)

3/4 (19.1) 12 00

44 50 (119) 74 50 (200) 9500 (255)

91 00 (244)

5650 (151) 11350 (304) 16650 (446) 17500 (469)

16500 (442) 18000 (482) 750 (20.1)

103 50 (277)

19300 (517)

19300 (517) 202 00 (541)

940 0 (252) 20200 (541)

9400 (252) 21200 (568)

11800 (316)r'>

1500 (40.2) 2500 (67.0) 3400 (91,1)

4200 (113) 7000 (188) 17650 (473)

1600 (42.8) 2600 (69.7) 3350 (89.8)

3750 (101) 8500 (228) 18100 (485)

23450 (628)

202 00 (541)

102 00 (273)

11000 (295) 141 00 (378)

196 00 (525)

1500 (40.2) 1900 (50.9) 2800 (75,0)

4000 (107) 14400 (386) 18000 (482)

1 700 (45.6)

2700 (72,4) 380 0 (102)

2700 (72.4) 3600 (96.5) 3800 (102)

5300 (142) 18000 (482) 25400 (681)

10600 (284) 18500 (496)

1700 (45.6) 2350 (62.9)

1800 (482) 3250 (87,1)

19600 (525)

1900 (50.9)

5950 (159) 18100 (485)

640 0 (172) 10150 (272) 19200 (515)

6700 (180) 10500 (281)

22700 (606)

13800 (370)

Limited clue to boost

r--1 -

Shaded areas show where Included droop would be exceeded regardess of capacity = - Shaded seas show where maximum opereing ink& pressure for a gv en port ciameter is exceeded

continued

15

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 7. Types S201, S202. S203. S208. and S209 Flow Capacities (continued) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

CAPACITIES IN SCFH (Nr&/h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS INLET PRESSURE. PSIG (bar) 3/8 (9.52)

1/2 (12.7)

3/4 (19.1)

1 (25.4)

1-3/16 (30.2)

1 250 (33,5)

1 550 (41,5)

2150 (57.6) 3200 (85.8)

2800 (75.0)

10 (0.69)

700 (18,8) 1 050 (28.1) 1 650 (44.2)

2900 (77.7) 4800 (129) 6550 (176)

30 50 (81.7) 56 00 (150) 78 00 (209)

3250 ( 87,1 ) 6300 (169) 8150 (218)

15 (1.03) 20 (1.38) 25 (1,72)

2 000 (53.6) 2 300 (61.6) 2 600 (69.7)

4100 (110) 4 750 (127) 5500 (147)

5 750 (154)

6100 (163) 8200 (220)

8000 (214) 8700 (233) 9950 (267)

9-100 (252) 1 0950 (293)

30 40 45 50

(2.07) (2.76) (3.10) (3,45)

2 900 (77,7) 3 600 (96.5)

8350 (224) 9 350 (251) 10350 (277) 10 950 (293)

10800 (2B9) 1 08 50 (291) 11000 (295) 110 50 (296)

122 50 (328)

3900 (105) 4250 (114)

6250 (168) 7500 (201) 8 400 (225) 8 900 (239)

60 80 100 125

(4,14) (5.52) (6.90) (8.62)

4 950 (133)

10000 (268) 11150 (299) 12000 (322) 12 000 (322)

11 000 (295) 11 350 (304) 12 000 (322)

11400 (306)

6150 (165) 7500 (201) 9150 (245)

5 (0.34)

1D893337032

± 02 psig (0.014 bar)

2 (0.14)

5 (0.34) 10 (0.69)

1 psi() (0.069 bar)

1D893337032 ± 1 % ABS

± 016 psia (0.011 bar)

1 psig (0,069 bar)

1D893337032 ± 2 % ABS ± 0 31 psia (0.021 bar)

1 psig (0,069 bar) 1H97 582 7032

i 02 psig (0.014 bar) 1

Orifice Sin. Inches (mm) 1/4 (6.35)

2 (0.14)

1 psig (0.069 bar)

1-1/2-Inch (DN 40) Body Size

15 (1.03) 20 (1,38) 25 (1.72)

650 (17.4) 1 050 (28.1) 1 500 (40.2)

1 050 (28.1)

1 950 (52.3)

2200 (58.9) 2 500 (67,0)

3 750 (101) 4 600 (123) 5 000 (134)

6000 7350 8250 8450

30 40 45 50

(2.07) (2.76) (3.10) (3.45)

2800 3550 3900 4050

60 80 100 125

(4.14) (5.52) (6.90) (8,62)

4 800 (129) 5 900 (158) 7400 (198) 9 000 (241)

(75,0) (95.1) (105) (109)

2100 (56.3) 2800 (75.0)

(161) (197) (221) (226)

9 050 (243) 11 000 (295)

11150 (299)

750 (20.1) 1 250 (33$) 1 750 (46.9)

1 450 (38.9) 2 500 (67,0)

15 (1.03) 20 (1.38) 25 (1.72)

2 050 (54.9) 2 500 (67.0) 2 700 (72,4)

4 350 (117)

30 40 45 50

(2,07) (2,76) (3.10) (3.45)

3 050 (81.7) 3 703 (99.2) 4100 (110) 4550 (122)

6 650 (178)

60 80 100 125

(4.14)

5000 6450 7950 9450

(6.90) (8,62)

2 (0.14)

5 (0.34) 10 (1.03) 30 60 100 125

(2.07) (4.14) (6,90) (8,62)

(134) (173) (213) (253)

500 (13,4) 1100 (29,5) 1 600 (42.9)

2800 (75.0) 4 900 (131)

7300 (196) 9100 (244)

10250 (275)

11550 (310)

IMP

1 350 (36.2) 2 700 (72,4) 3 700 (99.2)

2450 (65.7) 3800 (102) 5600 (150)

4 900 (131)

6900 (185) 81 50 (218) 9050 (243)

5800 (155) 7250 (194) 8200 9100 9650 10300

(220) (244) (259) (276)

9400 (252) 9500 (255) 101 00 (271) 10300 (276)

1 0450 (280) 11100 (297) 11150 (299)

1 0550 (283)

2100 (56.3) 3 550 (95.1) 5100 (137)

3700 (992) 6050 (162) 8550 (229)

6700 (180) 8100 (217) 10100 (271)

105 00 (281) 115 50 (310)

2 700 (72.4)

4700 (126) 7000 (188)

3000 (80.4) 5200 (139) 7300 (196)

8500 (228)

8750 (235)

1 03 50 (277)

108 50 (291)

11000 (295)

11 750 (315)

2 (0.14) 5 (0.34) 10 (0.69)

(5$2)

4 400 (118)

3450 (92.5)

5150 (138) 5 800 (155) 7950 (213) 8 800 (236) 9250 (248)

10900 (292) 12 550 (336) 12 900 (346) 13450 (360)

9400 (252)

10 550 (283) 10 550 (283) 11 800 (316) 12000 (322)

12350 (331) 12350 (331)

12 600 (338)

130 00 (348)

4650 (125) 7900 (212) 9550 (256)

5350 (143) 7900 (212) 10100 (271)

112 50 (302) 122 00 (327)

11400 (306)

12600 (338) 131 00 (351)

12 700 (340) 13000 (348)

13000 (348) 13450 (360)

750 (20,1)

1 750 (46,9)

1 800 (48.2)

3200 (85.8)

2 300 (61,6) 4 600 (123)

6300 (169) 9600 (257) 11200 (300)

7800 (209) 9 650 (259) 11950 (320)

2250 (60.3) 3400 (91.1) 72 50 (194)

104 00 (279) 11 000 (295)

2400 (64.3) 4850 (130) 8800 (236)

2850 (76.4) 5350 (143) 8800 (236)

112 50 (302)

10 550 (283)11,

Lineted due to boost

E-1 - Shaded areas show where incecated droop wodd be exceeded regardless of capacity - Shaded areas show where maximum operating inlet pressure for a gven port (ammeter is exceeded

I-1

continued

16

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 7. Types S201, S202. S203. S208, and S209 Flow Capacities (continued) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

CAPACITIES IN SCFH (NnWh) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE. PSIG (bar)

1D893337032 ± 0 2 psig (0.014 bar)

1 psig (0,069 bar)

1D893337032

±1 % ABS ± 016 psia (0.011 bar)

1 psig (0.069 bar) 1D893337032

±2 % ABS ± 0 31 psia (0,021 bar)

1 psig (0,069 bar) 1H975 82 7032

± 0 2 psig (0.014 bar)

()rift* Sin, Inches (mm) 114 (6,35)

3/8(9.52) 12 00 (32.2)

5 (0.34) 10 (0.69)

650 (17.4) 11 00 (29.5) 1600 (42.9)

15 (1.03) 20 (1.38) 25 (1,72)

1900 (50.9) 2300 (61.6) 2600 (69.7)

4000 (107) 4900 (131) 5600 (150) 6500 8000 8800 9300

2 (0.14)

1 psIg (0.069 bar)

2-Inch (DN 50) Body Sin

2300 (61.6) 30 00 (80.4)

30 40 45 50

(2.07) (2,76) (3.10) (3.45)

2900 3700 4000 4300

(77.7) (99.2) (107) (115)

60 80 100 125

(4.14) (5.52) (6,90) (8.62)

4900 6303 7700 9600

(131) (169) (206) (257)

11300 (303) 142 00 (381)

2 (0,14) 5 (0,34) 10 (0.69)

570 (15.3) 1050 (28.1) 1500 (40.2)

1100 (29.5) 22 00 (58.9)

15 (1,03) 20 (1.38) 25 (1.72)

30 40 45 50 60 80 100 125

(174) (214) (236) (249)

1/2 (12.7) 22 00 (58.9) 32 00 (85.8) 4300 (115) 69 00 (185) 91 00 (244)

3/4(19,1) 32 00 (85.8)

4800 (129)

1 -3116(30,2)

4500 (121) 10000 (268) 1 6300 (437)

114 00 (306)

1 5200 (407)

1 5600 (418)

2080 0 (557) 24000 (643) 2 7400 (734)

1 05 00 (281)

19000 (509) 21 703 (582)

11800 14500 15800 16600

25300 27000 27000 28000

(316) (389) (423) (445)

1 (25,4)

3600 (96.5) 7700 (206)

(678) (724) (724) (750)

3280 0 (879)

19500 (523) 24000 (643) 29500 (791)

31600 (847)

2000 (53,6) 2750 (73.7) 4050 (109)

2750 (73,7)

2500 (67.0)

8500 (228)

1 325 0 (355)

1900 (50,9) 2300 (61,6) 2500 (67.0)

3450 (92.5) 4800 (129) 5600 (150)

5800 (155) 7700 (206) 10400 (279)

155 00 (415)

16000 (429) 20850 (559) 22800 (611)

(2.07) (2.76) (3.10) (3.45)

2900 (77.7) 3650 (97,8) 3850 (103)

6350 (170) 7850 (210)

119 50 (320)

42 50 (114)

84 00 (225) 9350 (251)

(4,14) (5.52) (6,90) (8.62)

4900 (131) 6200 (166)

112 00 (300) 142 50 (382)

74 00 (198)

16750 (449) 2 02 00 (541)

9350 (251)

44 50 (119) 52 50 (141)

7850 (210)

2 750 (73.7)

5900 (158)

31 50 (84.4)

6550 (176)

3750 (101) 4050 (109) 4400 (118)

82 00 (220)

30 40 45 50

(2,07) (2.76) (3.10) (3.45)

60 80 100 125

(4,14) (5.52) (6,90) (8.62)

5050 6350 7850 9400

30 (2.07) 60 (4.14) 100 (6.90) 125 (8,62)

32 000 (858)

(135) (170) (210) (252)

500 (13.4) 1100 (29.5) 1600 (42.9) 2800 4900 7500 9000

(75.0) (131) (201) (241)

8800 (236) 9300 (249)

(638) (651) (681) (697)

3100 (83.1) 6250 (168)

4000 (10T) 9000 (241) 13700 (367)

16300 (437)

24300 (651)

24600 (659) 29000 (777)

2050 (54.9) 2400 (64.3)

15 (1.03) 20 (1.38) 25 (1,72)

21500 (576)

194 00 (520)

1800 (48.2)

11 50 (30.8)

1 83 00 (490)

23800 24300 25400 26000

2450 (65.7) 4000 (107) 62 00 (166)

700 (18.8)

5 (0.34) 10 (0.69)

41 00 (110)

14550 (390) 15600 (418) 16700 (448)

1450 (38,9) 2550 (68.3) 3550 (95.1)

2 (0,14)

2 (0.14) 5 (0.34) 10 (1,03)

16700 (448) 20200 (541)

22 300 (598)

91 00 (244) 103 00 (276)

11800 14300 15600 16700

(316) (383) (418) (448)

108 50 (291) 136 00 (364)

195 00 (523) 24600 (659)

1 70 00 (456)

302 00 (809)

41 00 (110)

5600 (150)

8000 (214) 12300 (330)

11 700 (314)

18400 (493)

159 00 (426) 192 00 (515) 218 00 (584)

22000 (590) 25800 (691) 31200 (836)

262 00 (702)

35000 (938)

7900 (212) 14300 (383) 20000 (536)

24600 (659)

30500 (817) 281 00 (753) 339 00 (909) 342 00 (917)

20500 (549) 1050 (28.1) 2000 (53.6) 35 00 (93.8) 62 00 (166) 109 00 (292)

17300 (464) 19900 (533)

1400 (37.5) 22 00 (58.9)

22 00 (58,9) 4500 (121)

5700 (153)

9700 (260)

11 700 (314)

20000 (536) 20600 (552)

19300 (517) 23900 (641)

2900 (77,7) 6600 (177) 1 300 0 (348)

3700 (99.2) 7000 (188) 1 3300 (356)

23000 (616)

E-1- Shaded yeas show where sidcated droop would be exceeded regardess or capacity I-7 - Shaded yeas show where nuoorriurn operating inlet pressure for a 'pen port darneter is exceeded

17

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 8. Types S2011-1. S2021-1, S2031-1. S2081-1. and S2091 Capacities OU TLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

CAPACITIES IN SCFH (Nr&/h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE,

1-1/2-Inch (DN 40) Body Size

Orifice Size. Inches (mm)

PSI G (bar)

1/4 (6.35)

3/8 (9,52)

1/2 (12.7)

3/4 (19,1)

1 (25,4)

1-3/16 (30.2)

5 (0,34) 10 (0.69) 15 (1.03)

850 (22.8) 1450 (38.9)

1650 (44,2)

(442)

1600 (42.9) 2050 (54,9) 3000 (80.4)

3250 (871) 4300 (115)

2400 (64.3) 5400 (145) 7000 (188)

2450 (65.7) 5750 (154) 8200 (220)

3900 (105) 6650 (178) 8200 (220)

2 psig (0.14 bar)

20 (1.38) 25 (1,72) 30 (2.07)

2050 (54.9) 2500 (67.0) 2750 (73.7)

3850 (103) 4600 (123) 5650 (151)

5650 (151) 6500 (174) 6500 (174)

7500 (201) 9600 (257) 9600 (257)

1H975827032

40 (2.76) 45 (3,10) 50 (3.45)

3500 (93.8) 3750 (101) 4250 (114)

7000 (188) 7800 (209) 8500 (228)

8400 (225) 9150 (245) 9600 (257)

10150 (272) 10500 (281) 10500 (281)

(236) (268) (289) (327)

9700 (260) 11250 (302) 11250 (302)

11400 (306)

± 0 2 psig (0.014 bar)

60 80 100 125

(4,14) (5.52) (6.90) (8.62)

5 (0.34)

1 650

4850 6150 7600 9300

(130) (165) (204) (249)

8800 10000 10800 12200

9050 (243) 9700 (260) 10850 (291)

10 (0.69) 15 (1.03)

1100 (29.5) 1 750 (46.9) 2000 (53.6)

2200 (58.9) 3150 (84,4) 4200 (113)

2800 (75,0) 4600 (123) 6400 (172)

4550 (122) 7550 (202) 10050 (269)

9050 (243) 11000 (295)

2 psig (0,14 bar)

20 (1.38) 25 (1.72) 30 (2.07)

2400 (64.3) 2700 (72.4) 3100 (831)

5000 (134) 5750 (154) 6700 (180)

7550 (202) 9600 (257) 9600 (257)

11700 (314) 11900 (319) 11900 (319)

12200 (327) 12950 (347) 13300 (356)

1H 97582 7032

40 (2.76) 45 (3,10) 50 (3,45)

3750 (101) 4100 (110) 4550 (122)

7950 (213) 8750 (235) 9550 (256)

10750 (288) 10750 (288) 12700 (340)

13000 (348) 13000 (348) 13000 (348)

(302) (342) (387) (391)

13300 (356) 13300 (356) 13300 (356)

14400 (386)

± 04 ps4g (0.028 bar)

60 80 100 125

2 psig (0.14 bar) 1H975827032 ±1

ABS

± 017 psia (0.012 bar)

2 psg (0,14 bar) 1H975827032 ± 2 % ABS

± 033 psia (0.023 bar)

(4,14) (5,52) (6.90) (8.62)

5150 6450 7750 9400

(138) (173) (208) (252)

11250 12750 14450 14600

5600 (150)

5 (0.34) 10 (0.69) 15 (1.03)

850 (22.8) 1400 (37.5) 1500 (40.2)

1400 (37.5) 1650 (442) 2700 (72.4)

1450 (38.9) 2550 (68.3) 3800 (102)

2250 (60.3) 4350 (117) 6000 (161)

2450 (65.7) 5250 (141) 5400 (145)

20 (1.38) 25 (1.72) 30 (2.07)

2000 (53.6) 2400 (64.3) 2800 (75.0)

3600 (96.5) 4500 (121) 5600 (150)

5200 (139) 6400 (172) 7500 (201)

7200 (193) 9000 (241) 10000 (268)

8200 (220) 9550 (256) 10400 (279)

40 (2.76) 45 (3.10) 50 (3.45)

3600 (96.5) 3900 (105) 4300 (115)

7800 (209) 8400 (225) 9100 (244)

9200 (247) 9800 (263) 10300 (276)

10150 (272) 10900 (292) 10600 (284)

11400 (306) 10300 (276)1) 11150 (299)1)

11300 (303)

60 80 100 125

(4.14) (5.52) (6.90) (8.62)

5000 6400 7900 9600

(134) (172) (212) (257)

10200 12000 13000 11950

(273) (322) (348) (320)1)

5 (0,34) 10 (0,69) 15 (1.03)

1 050 (28,1)

2100 (56.3) 3050 (81.7) 4200 (113)

2500 (67,0) 4200 (113) 6200 (166)

41 00 (110)

1650 (44.2) 1900 (50,9)

6400 (172) 8800 (236)

5200 (139) 8350 (224) 10500 (281)

20 (1.38) 25 (1.72) 30 (2.07)

2200 (58.9) 2500 (67,0) 3000 (80,4)

5100 (137) 5800 (155) 6500 (174)

7600 (204) 8700 (233) 9600 (257)

10300 (276) 11800 (316) 12600 (338)

12000 (322) 12050 (323) 12700 (340)

40 (2.76) 45 (3.10) 50 (3.45)

3600 (96.5) 3900 (105) 4300 (115)

8100 (217) 8800 (236) 9700 (260)

11500 (308) 12000 (322) 12600 (338)

12700 (340) 12800 (343) 12900 (346)

(303) (381) (415)

13600 (364) 12650 (339) 12950 (347)

13700 (367)

60 80 100 125

(4,14) (5.52) (6.90) (8.62)

5000 6400 7900 9600

(134) (172) (212) (257)

11300 14200 15500 14200

6550 (176) 10150 (272) 11200 (300)

3300 (88.4) 5600 (150) 8000 (214)

6250 (168) 8850 (237) 10750 (288)

(381)')

L 'lilted due to boost (1 - Shaded areas show where indcated droop would be exceeded regardess of capacity Shaded we show where maximum operating inlet pressure for a gven port dErneter is exceeded

1

continued

18

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 8. Types S2011-1, S202H, S203H, S2081-1, and S209H Capacities (continued) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

CAPACITIES IN SCFH (NnWh) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE, PSIG (bar)

2-Inch (DN 50) Body Sin

()rift* Sin. Inches (mm) 1/4 (6.35)

318 (9.52)

112 (12,7)

3/4 (19.1)

1 (25,4)

1-3116 (30,2)

5 (0.34) 10 (0,69) 15 (1,03)

850 (22.5) 1350 (36.2) 1 700 (45.6)

1800 (48.2) 1900 (50.9) 2800 (75.0)

1800 (48.2) 3000 (80,4) 3700 (99.2)

2950 (79,1) 52 00 (139) 69 00 (185)

4250 (114) 6600 (177) 7200 (193)

5200 (139) 7800 (209) 9500 (255)

2 psig (0.14 bar)

20 (1.38) 25 (1.72) 30 (2.07)

2000 (53.6) 2450 (65.7) 2650 (71.0)

3800 (102) 4500 (121)

5300 (142) 6800 (182) 7500 (201)

9000 (241) 12500 (335) 16000 (429)

980 0 (263) 14200 (381) 16100 (431)

1H975527032

40 (2,76) 45 (3.10) 50 (3,45)

34 00 (91.1)

7400 (198) 8000 (214) 8500 (228)

132 00 (354) 1 5500 (415)

21600 (579) 21600 (579) 21900 (587)

1 92 00 (515) 24800 (665) 25600 (686)

± 0 2 pstg (0.014 bar)

3600 (96.5) 4000 (107)

52 00

(139)

60 (4.14) 80 (5.52) 100 (6.90) 125 (8,62)

4600 (123) 5800 (155) 71 00 (190) 9000 (241)

10700 (287) 131 00 (351) 162 00 (434) 19900 (533)

5 (0.34) 10 (0.69) 15 (1,03)

11 00 (29.5)

1600 (42.9) 2000 (53.6)

22 50 (60.3) 32 50 (87,1) 41 50 (111)

2 psig (0,14 bar)

20 (1.38) 25 (1.72) 30 (2.07)

2300 (61.6) 2650 (71.0) 31 00 (831)

4950 (133) 58 00 (155) 6600 (177)

1H975 82 7032

40 (2,76) 45 (310) 50 (3.45)

3600 (96.5)

81 00 (217)

41 00 (110) 44 00 (118)

8850 (237) 9850 (264)

± 0 4 psig (0.028 bar)

60 80 100 125

2 psig (0.14 bar) 1H97582 7032

± 1 %ABS

± 017 (0.012 bar)

2 psig (0.14 bar)

(4.14) (5.52) (6.90) (8.62)

4900 6400 7600 9400

(131) (172) (204) (252)

11300 (303) 14300 (383) 1 72 00 (461) 20500 (549)

5 (0.34) 10 (0.69) 15 (1.03)

750 (20.1) 1250 (33.5) 1600 (42.9)

1600 (42.9) 1600 (42.9) 2 700 (72.4)

20 (1.38) 25 (1,72) 30 (2.07)

2000 (53.6) 2450 (65.7) 2800 (75.0)

3600 (96.5)

40 (2.76) 45 (3,1 0) 50 (3,45) 60 (4.14) 80 (5.52) 100 (6.90) 125 (8.62)

51 00 (137)

11000 (295)

6500 (174) 8000 (214) 9800 (263)

146 00 (391)

16700 (448)

32 00 (85.8)

18800 (504)m

72 00 (193)

100 00 (268) 144 00 (386)

7800 (209) 14100 (378) 18600 (498)

9000 (241) 1 02 00 (273) 11800 (316)

1 7500 (469) 20700 (555) 24900 (667)

2400 0 (643) 2800 0 (750) 28500 (764)

14600 (391) 158 00 (423) 1 72 00 (461)

280 00 (750) 29000 (777) 292 00 (783)

19500 (523) 24500 (657) 29700 (796)

29300 (785)

5400 (145)

5500 (147)

1600 (42,9)

2400 (64.3)

2550 (68.3) 3800 (102)

42 50 (114) 69 00 (185)

44 00 (118) 52 00 (139)

52 00 (139) 7500 (201) 8600 (230)

9600 (257) 11800 (316)

3700 (99.2)

7500 (201)

122 00 (327)

162 00 (434)

41 00 (110) 4400 00 (118)

84 00 (22 5)

15203 (407) 16900 (453)

18350 (492) 21000 (563)

20800 (557) 24800 (665) 29300 (785)

21000 (563)

9000 00

(241)

18000 (482) 20500 (549)

5200 (139)

5 (0.34) 10 (0.69) 15 (1.03)

1000 (26.8) 1550 (41.5) 1900 (50.9)

21 50 (57.6) 3050 (81,7) 42 00 (113)

2 750 (73.7) 5000 (134) 72 00 (193)

20 (1,38) 25 (1,72) 30 (2,07)

2300 (61.6) 2600 (69.7) 3000 (80.4)

51 00 (137)

92 00 (247)

5900 (158) 6600 (177)

10700 (287) 121 00 (324)

40 (2.76) 45 (3.10) 50 (3.45)

3700 (99,2)

82 00 (220)

41 00 (110) 4400 (118)

9000 (241) 9700 (260)

122 00 (327) 152 00 (407)

2 72 00 (729) 2 72 00 (729)

16900 (453)

27400 (734)

51 00 (137)

113 00 (303) 146 00 (391)

20800 (557) 24500 (657) 29600 (793)

27400 (734)

5000 (134) 8600 (230) 110 00 (295)

142 00 (381) 164 00 (440)

19700 (528)

3000 (80.4) 500 0 (134) 6900 (185)

10100 (271) 151 00 (405) 22100 (592)

4100 (110) 6100 (163) 7600 (204)

940 0 (252) 10650 (285) 16100 (431)

620 0 (166) 12750 (342) 11 750 (315)

7900 (212) 13800 (370) 21 700 (582)

16000 (429) 25400 (681) 27900 (748)

1H975 82 7032

±2 °A ABS

± 0 33psia (0,023 bar)

60 80 100 125

(4.14) (5.52) (6.90) (8.62)

6500 (174) 80 00 (214)

9800 (263)

18000 (482) 20500 (549)

Limited due to boost - Shaded areas show where indcaled droop would be exceeded reigarcless oI c spa( ty 1=1 - Shaded areas show where maximum operating inlet pressure for a qven port darnel er is exceeded

*1

continued

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 8. Types S201H. S202H, S2031-1. S2OBH. and S209H Capacdres (continued) CAPACITIES IN SCFH (Nreh) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

INLET PRESSURE, PSIG (bar)

1-112-Inch (DN 40) Body Siz

Orifice fice Sin, Inches (mm) 1/4 (6.35)

3/8 (9.52)

1/2 (12,7)

3/4 (19.1)

1 (25.4)

1-3/16 (30.2)

5 (0,34) 10 (0.69) 15 (1.03)

BOO (21,4) 12 00 (32.2)

(442)

1350 (36.2) 1800 (48.2) 2300 (61.6)

1650 (44.2) 2650 (71.0) 3750 (101)

2500 (67,0) 4600 (123) 6500 (174)

2500 (67,0) 605 0 (162) 920 0 (247)

3850 (103) 6600 (177) 8200 (220)

3 pug (021 bar)

20 (1.38) 25 (1.72) 30 (2,07)

1950 (52.3) 21 50 (57.6) 2 700 (72.4)

3500 (93.8) 4400 (118) 5600 (150)

5000 (134) 6500 (174) 6700 (180)

8350 (224) 81 50 (218) 10050 (269)

9200 (247) 10050 (269) 11250 (302)

1H975927032

40 (2,76) 45 (3,10) 50 (3.45)

3300 (88.4) 3550 (95.1) 4050 (109)

6900 (185) 7000 (188) 7800 (209)

79 00 (212) 8650 (232) 9700 (260)

10300 (276) 11000 (295) 11000 (295)

(414)

42 50 (114)

5950 (159) 7450 (200) 8800 (236)

82 00 (220) 10000 (268) 11 750 (315) 122 00 (327)

9900 (265) 11600 (311) 11900 (319)

11450 (307)

(5.52) (6.90) (8.62)

± 0 3 psig (0.021 bar)

60 80 100 125

1 650

5 (0,34)

11 00 (29.5)

10 (0.69) 15 (1.03)

1650 (44.2) 2050 (54.9)

3 psig (021 bar)

20 (1.38) 25 (1.72) 30 (2.07)

2400 (64.3) 2600 (69.7)

1H975927032

40 (2.76) 45 (3.10) 50 (3.45)

31 50 (84.4) 41 50 (111) 44 00 (118)

7850 (210)

(4.14) (5.52) (6,90)

5000 (134) 6400 (172) 7650 (205)

(862)

92 00 (247)

10700 (287) 130 50 (350) 154 00 (413) 16050 (430)

± 0 6 psig (0.041 bar)

60 80 100 125

3 pvg (0.21 bar)

31 00 (83.1)

1 950 (52.3) 31 00 (83.1) 41 00 (110)

4900 (131) 5750 (154) 6550 (176) 84 00 (225) 9300 (249)

5 (0.34) 10 (0.69) 15 (1.03)

500 (13,4) 900 (24,1) 1200 (32.2)

11 50 (30,8)

20 (1.38) 25 (1.72) 30 (2.07)

1500 (40.2) 1900 (50.9) 22 00 (58.9)

21 00 (56.3)

40 (2.76) 45 (3.10) 50 (3.45)

2900 (77,7) 3300 (88,4) 3700 (99.2)

4800 (129) 5800 (155) 6800 (182)

4400 (118) 6300 (169)

8400 (225) 10800 (289)

1350 (36.2) 1 700 (45.6)

2600 (69.7) 31 00 (83,1)

42 50 (114)

7750 (208) 9550 (256)

111 50 (299)

7800 (209) 8700 (233) 102 50 (275)

10650 (285) 11950 (320) 12050 (323)

12350 (331) 14050 (377) 14400 (386)

11300 (303) 12450 (334) 12450 (334)

1 3800 (370) 141 50 (379) 141 50 (379)

1 30 00 (348)

15350 (411)

i 018 Asia (0.012 bar)

3 psig (0.21 bar)

60 80 100 125

(414) (5.52) (6,90) (8,62)

81 00 (217) 100 00 (268)

121 00 (324) 10750 (288$'?

1200 (32.2) 1500 (40.2) 22 00 (58.9)

1450 (38.9) 2 750 (73.7) 3900 (105)

1 55 0

2900 (77.7) 4300 (115) 51 00 (137)

5300 (142)

BOO 0

74 00 (198)

9350 (251) 8650 (232$'>

8000 (214) 9300 (249)

8750 (235) 9900 (265) 10600 (284)

102 00 (273)

11600 (311) 9400 (252$'?

11 750 (315)

8400 (225)

1450 (38.9)

1800 (48.2) 31 50 (84.4) 4400 (118)

3800 (102) 5000 (134) 5800 (155)

61 00 (163) 76 00 (204) 8700 (233)

112 00 (300)

3600 (96.5) 4000 (107) 4600 (123)

78 00 (209)

10800 (289) 11600 (311) 12400 (332)

11600 (311) 11600 (311) 11 750 (315)

51 00 (137)

10600 (284) 12700 (340) 144 00 (386) 12500 (335$'>

138 00 (370) 12600 (338$'> 12550 (336$'>

13250 (355)

900 (24,1) 1250 (33.5) 1800 (48.2)

20 (1,38) 25 (1.72) 30 (2.07)

22 00 (58.9)

40 (2.76) 45 (3.10) 50 (3,45) (4,14) (5,52) (6.90) (8.62)

2600 (69.7) 2900 (77.7)

(41.5) 3200 (85.8) 4900 (131)

2100 (56.3) 3400 (91.1) 4950 (133)

(214)

10700 (287)

2050 (54,9) 31 00 (831)

5 (0.34) 10 (0.69) 15 (1.03)

7200 (193) 9100 (244) 11800 (316)

160 00 (429) 160 50 (430)

1H97592 7032 ± 1 °A ABS

540 0 (145) 8700 (233)

2800 (75,0) 4650 (125) 5950 (159)

3000 (80.4) 51 50 (138) 72 00 (193) 86 00 (230) 9700 (260)

3000 (80,4) 6450 (173) 8700 (233)

4650 (125) 6650 (178) 8700 (233)

1100 0 (295) 1105 0 (296) 1145 0 (307)

1H975 927032

i 2% ABS ± 0 35 psia (0.024 bar)

1

60 80 100 125

6500 (174) 81 00 (217) 10000 (268)

8400 (225) 9400 (252)

Limited due to boost

F1 shaded areas show where reheated droop would be exceeded regardess d capacity shaded areas show where maximum operatrg !Met pressure for a gven port darteter is exceeded

continued

20

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 8. Types S2011-1. S2021-1, S2031-1. S2081-1. and S2091 Capacities (continued) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

3 psg (0.21 bar) 1H 975927032

± 0 3 psig (0.021 bar)

CAPACITIES IN SCFH (Nrnlh) OF 0.6 SPECIFIC GRAVITY NATURAL GAS INLET PRESSURE.

2-Inch (DN 50) Body Size

Orifice Size, Inches (mm)

P SI G (bar)

1/4 (6.35)

3/8 (9,52)

1/2 (12.7)

3/4 (19.1)

1 (25.4)

1-3/16 (30,2)

5 (0,34) 10 (0.69) 15 (1.03)

750 (20.1) 1200 (32.2) 1400 (37.5)

1400 (37.5) 1900 (50,9) 2000 (53.6)

1600 (42.9)

2400 (64.3) 5000 (134) 5900 (158)

2900 (77,7) 6400 (171) 7700 (206)

3500 (93.8) 6900 (185) 9800 (263)

20 (1.38) 25 (1,72) 30 (2.07)

1850 (49.6) 2050 (54.9) 2550 (68.3)

3000 (BOA) 3900 (105) 4800 (129)

41 50 (111)

5000 (134) 6700 (180)

7700 (206) 9100 (244) 10100 (271)

40 (2.76) 45 (3,10) 50 (3,45)

31 50 (84.4)

6250 (168) 6750 (181) 6750 (181)

8700 (233) 9900 (265) 12300 (330)

11600 (311) 14500 (389) 13900 (373)

(252) (340) (397) (504)

12 700 (340)

18300 (490)

60 (4.14) 80 (5.52) 100 (6.90) 125 (8.62)

3400 (91.1) 3900 (105) 4350 5600 7000 8650

(117) (150) (188) (232)

9400 12700 14800 18800

2750 (73.7) 3100 (83.1)

7900 (212) 9750 (261) 1 7200 (461)

18800 (504) 18800 (504)

5 (0.34) 10 (0.69) 15 (1.03)

1100 (29.5) 1550 (41.5) 2050 (54.9)

1950 (52.3) 3000 (80.4) 3850 (103)

2550 (68.3) 4750 (127) 5950 (159)

4700 (126) 8600 (230) 12600 (338)

6000 (161) 12200 (327) 16200 (434)

3 prig (0.21 bar)

20 (1.38) 25 (1.72) 30 (2.07)

2400 (64.3) 2800 (75.0) 3150 (84.4)

4850 (130) 5750 (154) 6450 (173)

8200 (220) 9800 (263) 11600 (311)

1 7000 (456) 19700 (528)

22500 (603)

21800 (584) 23000 (616) 26500 (710)

1H 97592 7032

40 (2,76) 45 (3,10) 50 (3,45)

3650 (97.8) 4100 (110) 4350 (117)

7850 (210) 8900 (239) 9450 (253)

14300 (383) 1 5500 (415) 1 7000 (456)

26400 (708) 28500 (764) 29600 (793)

(137) (170) (194) (252)

11100 (297) 14350 (385) 17250 (462) 21000 (563)

19850 (532) 25200 (675) 29400 (788)

29900 (801)

5 (0.34) 10 (0.69) 15 (1.03)

650 (17.4) 1000 (26.8) 1250 (33.5)

1100 (29.5) 1250 (33.5) 1750 (46.9)

790 (21.2) 1500 (40.2) 2000 (53.6)

1500 (40.2) 2500 (67.0) 2900 (77.7)

1 700 (45.6) 3700 (99.2) 3750 (101)

20 (1.38) 25 (1.72) 30 (2.07)

1450 (38.9) 1600 (42.8) 1 950 (52,3)

2400 (64.3) 2900 (77.7) 3550 (95.1)

2200 (58.9) 4000 (107) 4400 (118)

4100 (110) 6900 (185) 8700 (233)

5750 (154) 6400 (172) 6700 (180)

40 (2.76) 45 (3.10) 50 (3.45)

2700 (72,4) 2900 (77,7) 3300 (88.4)

3850 (103) 5400 (145) 5700 (153)

5500 (147) 9000 (241) 9100 (244)

6450 (173) 8000 (214) 7900 (212)

± 0 6 psg (0.041 bar)

60 (4.14) 80 (5,52) 100 (6.90) 125 (8.62)

3 psg (0.21 bar)

5100 6350 7250 9400

7450 (200) 15400 (413) 20300 (544)

1 750 (46.9) 4 300 (115) 6 000 (161)

1H 97592 7032

±1 % ABS ± 0 18 psa (0.012 bar)

3 psg (0.21 bar) 1H97592 7032

±2 % ABS 0 35 psa (0.024 bar)

1

60 (4.14) 60 (5.52) 100 (6.90) 125 (8.62)

3900 5250 6250 7750

(105) (141) (168) (208)

7200 9200 11300 12650

(193) (247) (303) (339)

11500 (308) 9800 (263Y" 10900 (292r

10300 (276)

111115

5 (0,34) 10 (0,69) 15 (1.03)

800 (21,4) 1300 (34.8) 1550 (41,5)

1450 (38,9) 2150 (57.6) 2850 ( 76.4)

3200 (85.8) 4050 (109)

3150 (84.4) 5550 (149) 6800 (182)

3250 (87.1) 7200 (193) 8250 (221)

20 (1.38) 25 (1.72) 30 (2,07)

1850 (49.6) 2 350 (62.9) 2450 (65.7)

3300 (88.4) 4650 (12 5) 5100 (1 3 7)

5400 (145) 6700 (180) 8600 (230)

9300 (249) 11250 (302) 12250 (328)

10900 (292) 15600 (418) 1 7350 (465)

40 (2.76) 45 (3.10) 50 (3,45)

3150 (84.4) 3400 (91.1) 3800 (102)

6950 (186) 7650 (205) 8500 (228)

11400 (306) 11900 (319) 14000 (375)

15150 (406) 18150 (486) 20200 (541)

9850 (264) 12600 (338) 1 5500 (415) 20650 (553)

19000 (509) 23100 (619) 23650 (634)

21150 (567)

60 (4,14) 60 (5.52) 100 (6.90) 125 (8.62)

4300 5500 6500 8100

(115) (147) (174) (217)

1 700 (45.6)

4 000 (10T)

9000 (241) 10800 (289)

L 'lilted due to boost - Shaded areas show where indcated droop would be exceeded regardess of capacity Shaded we show where maximum operating inlet pressure for a gven port dErneter is exceeded

continued

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 8. Types S2011-1. S2021-1, S2031-1, S2081-1. and S209F1 Capacities (continued) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

5 prig (0.34 bar) 1P61542 7142

± 0 5 psig (0.034 bar)

5 prig (0.34 bar) 1P615427142 ± 1 psig (0.69 bar)

5 psig (0,34 bar)

1P615427142 ± 1 % ABS

± 020 psia (0.014 bar)

5 psig (0.34 bar)

1P615427142 ± 2 °A ABS

± 039 psia (0,028 bar)

t

CAPACITIES IN SCFH (Nm1h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE,

1-112-Inch (DN 40) Body Size

Orifice Size, Inches (mm)

PSI G (bar)

3/4 (19.1)

1 (25,4)

1-3/16 (302)

10 (0.69) 15 (1.03) 20 (1.38)

1200 (32.2) 1350 (36.2) 1850 (49.6)

1850 (49,6) 2450 (65.7) 3200 (85.8)

2300 (61.6) 3200 (85.8) 3900 (105)

3350 (89.8) 5250 (141) 6700 (180)

4750 (127) 6650 (178) 8600 (230)

5500 (147) 7550 (202)

25 (1.72) 30 (2.07) 40 (2,76)

2200 (58.9) 2500 (67,0) 3250 (87.1)

3600 (96,5) 5100 (137) 6100 (163)

4900 (131) 6500 (174) 7650 (205)

8250 (221) 8800 (236) 10650 (285)

10000 (268) 11450 (307)

45 (3.10) 50 (3.45) 60 (4.14)

3650 (97.8) 3850 (103) 4600 (123)

6950 (186) 7550 (202) 8550 (229)

8500 (228) 9250 (24B) 10300 (276)

11200 (300) 12250 (328) 12950 (347)

80 (5,52) 100 (6.90) 125 (8.62)

5900 (158) 7250 (194) 9000 (241)

(283) 12000 (322) 13300 (356)

12500 (335) 12550 (336)

10 (0.69) 15 (1.03)

20 (1,38)

1550 (41,5) 2000 (53.6) 2450 (65,7)

2850 (76,4) 3850 (103) 4750 (127)

4050 (109) 5800 (155) 7150 (192)

6450 (173) 9250 (248) 11400 (306)

8450 (226) 11150 (299) 13250 (355)

25 (1.72) 30 (2.07) 40 (2.76)

2800 (75.0) 3100 (83.1) 3700 (99.2)

5700 (153) 6400 (172) 7850 (210)

8600 (230) 10050 (269) 12350 (331)

12800 (343) 13550 (363) 15650 (419)

15250 (409) 16800 (450)

45 (3,10) 50 (3.45) 60 (4,14)

4050 (109) 4450 (119) 5050 (135)

8600 (230) 9400 (252) 10700 (287)

13000 (348) 13650 (366) 15100 (405)

15950 (427) 16300 (437) 18200 (488)

BO (5.52) 100 (6,90) 125 (8,62)

6300 (169) 7600 (204) 9200 (247)

1 3400 (359) 1 5950 (427) 1 7800 (477)

17650 (473) 17650 (473)

10 (0,69) 15 (1.03) 20 (1,38)

1 050 (28.1)

900 (24,1) 1100 (29,5) 1400 (37,5)

1050 (28.1) 1500 (402) 2050 (54,9)

1200 (32,2) 2000 (53.6) 2800 (75.0)

1950 (52.3) 2600 (69.7) 3800 (102)

25 (1,72) 30 (2.0 7) 40 (2.76)

1200 (32.2) 1450 (38.9) 1 950 (52,3)

1800 (482) 2200 (58.9) 2950 (79,1)

2350 (62.9) 3000 (80.4) 4400 (118)

3800 (102) 4900 (131) 5750 (154)

4400 (118) 5250 (141)

45 (3,10) 50 (3,45) 60 (4,14)

2200 (58,9) 2400 (64,3) 2950 (79.1)

3300 (88,4) 3850 (103) 4800 (129)

5000 (134) 6200 (166) 8400 (225)

6550 (176) 8200 (220) 9250 (248)

80 (5.52) 100 (6.90) 125 (8.62)

4000 (107) 5300 (142) 7200 (193)

7400 (198) 10700 (287) 6150 (1657')

7800 (209) 9200 (247)

10 (0,69) 15 (1.03) 20 (1,38)

1050 (28.1) 1 350 (36.2) 1750 (46.9)

1650 (442) 2050 (54.9) 2700 (72.4)

1950 (52.3) 2900 (77,7) 3900 (105)

2600 (69,7) 4300 (115) 5800 (155)

3700 (99.2) 5600 (150) 7400 (198)

25 (1.72) 30 (2.07) 40 (2,76)

2100 (56.3) 2400 (64.3) 3200 (85.8)

3350 (89.8) 4050 (109) 5300 (142)

4850 (130) 5750 (154) 8000 (214)

7300 (196) 8700 (233) 9800 (263)

8750 (235) 10150 (272)

45 (3.10) 50 (3.45) 60 (4,14)

3500 (93.8) 3900 (105) 4700 (126)

6050 (162) 6800 (182) 8400 (225)

8950 (240) 9800 (263) 11500 (308)

10750 (288) 11000 (295) 12100 (324)

BO (5.52) 100 (6.90) 125 (8.62)

6150 (165) 7900 (212) 9700 (260)

11100 (297) 13100 (351) 11950 (3207')

1/4(6,35)

650 (17.4) BOO (21.4)

3/8 (9.52)

1 0550

1/2 (12.7)

m-

11

9800 (263) 12 400 (332)

2200 (58.9) 3400 (91,1)

4900 (131) 6 350 (170)

10300 (270') 11200 (3001)

Lirnited die to boost - Shaded areas show where indcated droop would be exceeded regar dess of capaoty - Shaded areas show where maximum operating inlet pressure for a gven port daneter is exceeded

continued

22

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 8. Types S2011-1, S202H, S203H, S2081-1, and S209H Capacities (continued) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

CAPACITIES IN SCFH (Nm31h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE, PSIG (bar)

()rift* Sim, Inches (mm) 1/4(6,3 5)

318 (9.52)

1/2 (12.7)

3/4 (191)

1 (25.4)

1-3116 (30,2)

1200 (32.2) 1400 (37.5) 1800 (48.2)

1 700 (45.6) 21 00 (56.3)

22 00 (58.9)

3750 (101) 5500 (147) 7000 (188)

5300 (142) 6850 (184) 7700 (206)

5800 (155) 8150 (218)

25 (1.72) 30 (2.07) 40 (2.76)

2050 (54,9) 2500 (67,0)

3750 (101) 4550 (122) 5800 (155)

4550 (122) 5800 (155)

975 0 (261) 10750 (288)

62 00 (166)

7900 (212) 8500 (228) 12000 (322)

45 (3,10) 50 (3.45) 60 (4.14)

3500 (93.8) 3900 (105) 4350 (117)

(166) 7000 (188) 7700 (206)

7000 (188) 7700 (206) 10950 (293)

12850 (344) 142 00 (381) 16650 (446)

80 (5.52) 100 (6.90) 125 (8.62)

5850 (157) 71 50 (192) 8900 (239)

10950 (293) 135 00 (362) 164 00 (440)

1 3500 (362) 164 00 (440)

10 (0.69) 15 (1.03) 20 (1,38)

1500 (40.2) 2050 (54.9) 2400 (64.3)

2800 (75.0) 3950 (106) 4750 (127)

4050 (109) 5700 (153) 7300 (196)

7350 (197) 10750 (288) 135 50 (363)

9400 (252) 12950 (347) 18450 (494)

25 (1,72) 30 (2.07) 40 (2.76)

2750 (73.7) 31 00 (83.1) 3750 (101)

5450 (146) 6500 (174) 7850 (210)

91 00 (244) 105 00 (281) 1 3700 (367)

162 00 (434) 192 00 (515) 252 50 (677)

20400 (547) 2470 0 (662)

45 (3.10) 50 (3,45) 60 (4.14)

4050 (109) 4400 (118) 4950 (133)

8550 (229) 9600 (257) 10850 (291)

151 50 (406)

25700 (689) 2 79 50 (749) 30550 (819)

80 (5.52) 100 (6.90) 125 (8.62)

64 50 (173) 7700 (206) 92 50 (248)

14000 (375)

241 50 (647) 29400 (788)

10 (0,69)

15 (1,03) 20 (1.38)

5 psig (0.34 bar)

2-Inch (DN 50) Body Sin

31 50 (84.4)

2850 (76.4)

2850 (76.4) 3750 (101)

1P61542 71 42

± 0 5 psig (0.034 bar)

5 psig (0.34 bar) 1P61 542 71 42

+ 1 psig (0.69 bar)

62 00

1 7000 (456) 20700 (555)

850 (22,8)

16650 (446) 191 50 (513)

2000 (53.6) 2300 (61,6) 3000 (80.4)

10 (0,69) 15 (1,03) 20 (1.38)

500 (13.4) 750 (20 .1 ) 1000 (26.8)

12 00

1550 (41.5)

1000 (26.8) 1400 (37.5) 1900 (50.9)

1250 (33.5) 1450 (38.9) 1900 (50.9)

1950 (52.3) 22 00 (58.9) 31 00 (83.1)

2300 (61.6) 2800 (75.0) 4000 (107)

3400 (91.1)

1P61542 71 42

25 (1.72) 30 (2,07) 40 (2.76) 45 (3.10) 50 (3.45) 60 (4.14)

21 00 (56,3) 2400 (64.3)

34 00 (91.1)

± 1 °A ABS ± 0 20 psia

3800 (102) 4700 (126)

4400 (118) 5000 (134) 6600 (177)

4600 (123) 5300 (142)

80 (5.52) 100 (6.90) 125 (8.62)

3900 (105) 5000 (134) 7000 (188)

73 00 (196)

50 50 (135p)

9300 (249) 6000 (161p)

6400

10 (0.69) 15 (1.03) 20 (1.38)

1000 (26.8) 1300 (34.8) 1650 (44.2)

1400 (37.5) 21 00 (56.3) 2750 (73.7)

1650 (44.2) 2800 (75.0) 3600 (96.5)

2900 (77.7) 39 00 (105) 5300 (142)

3500 (93,8) 5500 (147) 7400 (198)

25 (1.72) 30 (2.07) 40 (2,76)

2050 (54.9) 2400 (64.3) 31 00 (83.1)

3400 (91,1) 4000 (107) 5400 (145)

4400 (118) 5500 (147)

6800 (182) 7900 (212) 9300 (249)

740 0 (198)

45 (3.10) 50 (3.45) 60 (4.14)

32 50 (87.1)

61 00 (163)

3850 (103) 4450 (119)

6700 (180) 82 00 (220)

83 00 (222) 94 00 (252)

61 00 (163)

11000 (295) 140 00 (375) 11 650 (312)0)

5 psig (0.34 bar)

(0.014 bar)

5 psig (0.34 bar) 1P61542 71 42

±2 °/. ABS ± 0 39 psia (0.028 bar)

BO (5.52) 100 (6.90) 125 (8.62)

2800 (75.0)

7600 (204) 9600 (257)

(322)

1500 (40.2) 1900 (50.9) 2 700 (72.4) 41 00 (110)

12400 (332) 17100 (458)

2200 (58.9) 2900 ( 77,7)

3700 (99.2) 4000 (107)

3300 (88,4)

72 50 (194)

(1 72)(1)

72 00 (193)

11500 (308)

4500 (121) 5850 (157)

8350 (224)

98 50 (264) 10650 (285) 14550 (390)

1 08 50 (291) ")

11800 (316)

Limited ckie to boost 1 - Shaded areas show where Inc:Scaled droop would be exceeded regardless or capacity 7-1 - Shaded areas show where maximum operating inlet pressure for a given port diameter is exceeded

23

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 9. Types S2O1K and S208K Capaaties OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

5 psig (0.34 bar) OY06642 7022

± 0 5 pug (0.034 bar)

5 psig (0.34 bar) 0Y0 66427022

;1 psig (0.69 bar)

5 psig (0.34 bar) 0Y06642 7022

± 1 % ABS ± 0 20 psia (0.014 bar)

5 psig (0.34 bar) C1Y06642 7022

± 2 °A ABS ± 0 39 psia (0,028 bar)

t

CAPACITIES IN SCFH (Nm1h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

INLET PRESSURE.

1-112 and 2-Inch (DN 40 and 50) Body Size

Orifice Size, Inches (mm)

PSI G (bar)

1/4(6.35)

3/8(9.52)

1/2 (12,7)

3/4 (19.1)

1 (25,4)

1 -3116(30.2)

1250 (33.5) 1650 (44.2) 1 950 (52.3)

1900 (50.9) 2650 (71.0) 3300 (88.4)

2150 (57.6) 3200 (85.8) 4100 (110)

2 550 (68.3) 4 000 (107) 5 000 (134)

3950 (106) 4500 (121) 5800 (155)

4650 (125) 5500 (147)

6200 (166) 6600 (177) 8700 (233)

a

10 (0.69) 15 (1.03) 20 (1.38)

500 (13.4) 550 (14.7) 600 (16.1)

1000 (26.8) 1300 (34.8)

25 (1.72) 30 (2.07) 40 (2,76)

800 (21,4) 1600 (42.9) 1950 (52.3)

1 950 (52.3) 21 50 (57.6)

2650 (71.0)

2150 (57,6) 2650 (71.0) 2900 (77.7)

45 (3.10) 50 (3.45) 60 (4.14)

2250 (60.3) 2450 (65.7) 2600 (69.7)

2900 (77.7) 3450 (92.5) 3800 (102)

3450 (92.5) 3800 (102) 5350 (143)

80 (5,52) 100 (6.90) 125 (8.62)

3700 (99.2) 41 00 (110) 5450 (146)

5350 (143) 5900 (158) 7950 (213)

5900 (158) 7950 (213)

10 (0.69) 15 (1.03)

1 700 (45.6)

20 (1,38)

1150 (30.8) 1300 (34.8) 1900 (50.9)

2550 (68.3) 2950 (79.1)

2250 (60.3) 31 50 (84.4) 3950 (106)

3400 (91 .1 ) 5200 (139) 6000 (161)

4550 (122) 6350 (170) 8300 (222)

25 (1.72) 30 (2,07) 40 (2.76)

2200 (58.9) 2650 (71.0) 3100 (83,1)

3650 (97.8) 4000 (107) 5000 (134)

4850 (130) 5500 (147) 6900 (185)

7050 (189) 8750 (235) 10850 (291)

11 750 (315)

45 (3,10) 50 (3.45) 60 (4.14)

3450 (92.5) 3800 (102) 4400 (118)

5800 (155) 6450 (173) 7450 (200)

7650 (205) 8900 (239) 9800 (263)

11 700 (314) 14100 (378) 14900 (399)

80 (5.52) 100 (6,90) 125 (8,62)

5950 (159) 7000 (188) 8450 (226)

9300 (249) 11250 (302) 13800 (370)

12000 (322) 14750 (395)

1 650

(442)

10 (0.69) 15 (1.03) 20 (1.38)

350 (9.38) 350 (9.38) 500 (13.4)

400 (10.7) 750 (20.1) 900 (24.1)

650 (17.4) 850 (22.8) 1050 (28,1)

800 (21.4) 1250 (33.5) 1650 (44.2)

25 (1,72) 30 (2.0 7) 40 (2.76)

600 (16.1) 700 (18.8) 1000 (26.8)

1000 (26.8) 11 00 (29.5)

(362)

1200 (32.2) 1300 (34.8) 1 350 (36.2)

1650 (44.2) 1 950 (52.3) 2450 (65.7)

45 (3.10) 50 (3,45) 60 (4.14)

1100 (29.5) 1150 (30.8) 1150 (30.8)

1450 (38.9) 1600 (42.9) 1 750 (46.9)

1550 (41,5) 1600 (42.9) 2250 (60.3)

2550 (68.3) 3050 (81.7) 2400 (64.3)^

80 (5.52) 100 (6.90) 125 (8.62)

1600 (42.9)

2750 (73.7) 3250 (87.1)

2150 (57,6)

2350 (62.9) 2400 (64.3) 3050 (81.7)

10 (0.69) 15 (1.03) 20 (1,38)

450 (12.1) 450 (12.1) 550 (14,7)

450 (12.1) 1150 (30.8) 1400 (37.5)

11 00 (29.5) 1 500 (40.2)

1700 (45.6)

1500 (40.2) 2150 (57,6) 2800 (75.0)

25 (1.72) 30 (2.0 7) 40 (2.76)

1250 (33.5) 1350 (362) 1 700 (45.6)

(442)

2050 (54.9) 2500 (67.0) 2900 (77.7)

3050 (81.7) 3750 (101) 4700 (126)

45 (3.10) 50 (3,45) 60 (4.14)

1800 (48.2) 1900 (50.9) 2100 (56.3)

2 850 (76.4)

3500 (93.8) 3850 (103) 4300 (115)

5200 (139) 5900 (158) 6900 (185)

80 (5.52) 100 (6.90) 125 (8.62)

3100 (83,1) 3400 (91.1) 4400 (118)

4050 (109) 4800 (129) 5750 (154)

1 650

(442)

1 350

1 650

1850 (49,6) 2200 (58.9)

2350 (62.9) 2900 (77.7)

ish

5 650 (151)

8100 (217) 9 950 (267)

9950 (267)

1 050 (28.1)

1550 (41.5) 1800 (48.2)

1 300 (34,8) 1 650 (44.2) 2 050 (54.9)

1 950 (52.3)

2550 (68.3)

1 700 (45,6)

2500 (67.0) 3350 (89.8)

2250 (60.3) 3300 (88.4) 3900 (105)

4200 (113) 4350 (117)

5500 (147) 6050 (162)

Lirnited die to boost I - Shaded areas show where indcated droop would be exceeded regardess of capacity - Shaded areas show where maximum operating inlet pressure for a gven port (*armee( is exceeded

continued

24

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 9. Types S201K and S208K Capacrtres (contrntied) OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

10 psig (0.69 bar) 1H802400A2 ± 1 psig (0.069 bar)

CAPACITIES IN SCFH (NnWh) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

INLET PRESSURE. PSIG (bar)

1H802400A2

±2 pstg (0.14 bar)

10 psig (0.69 bar) 1H802400A2 ± 1 % ABS ± 1 5 psia (0.10 bar)

10 psig (0.69 bar) 1H802400A2 ± 2 % ABS

±2 9 psia

Orifice Size, Inches (mm) 1/4 (6.35)

3/8 (9,52)

112 (12,7)

3/4 (19,1)

1 (25.4)

1-3/16 (30,2)

1 050 (28.1) 1 650 (44.2)

1 200 (322) 2 500 (67.0) 3150 (84.4)

1 350 (36,2) 2 950 (79,1)

1 750 (46.9)

4 350 (117) 4 850 (130)

4900 (131) 6200 (166)

6500 (174)

7150 (192) 7650 (205)

3600 (96.5) 6450 (173) 9000 (241)

4250 (114) 7600 (204) 10400 (279)

10 (0,69) 15 (1,03) 20 (1,38)

550 (14.7) 700 (18.8) 803 (21.4)

1 200 (32.2) 1 650 (44.2)

25 (1.72) 30 (2.07) 40 (2.76)

1 500 (40,2) 1 850 (49.6)

2 000 (53.6) 2 300 (61.6)

2150 (57.6)

3050 (81.7)

2 750 (73,7) 3000 (80.4) 4100 (110)

45 (3,10) 50 (3.45) 60 (4.14)

2 300 (61.6) 2 500 (67.0) 2 900 (77,7)

3400 (91.1)

4 600 (123)

3 950 (106) 4 350 (117)

5100 (137) 6000 (161)

3900 (105)

5 950 (159)

7550 (202)

4 650 (125) 5 300 (142)

6800 (182) 8200 (220)

9 650 (259)

950 (25.5)

1 600 (42.9) 2 350 (62.9)

2 450 (65.7) 2 900 (77,7) 4 000 (107)

80 (5.52) 100 (6.90) 125 (8.62)

10 psig (0.69 bar)

1-1/2 and 2-Inch (DN 40 and 50) Body Size

BOO (21.4)

2100 (56.3)

10 (0.69) 15 (1.03) 20 (1,38)

1 550 (41.5) 1 900 (50.9)

25 (1,72) 30 (2.07) 40 (2.76)

2 300 (61.6) 2 750 (73.7) 3 400 (91,1)

3800 (102)

45 (3.10) 50 (3.45) 60 (4.14)

3 650 (97.8)

3950 (106)

6300 (169) 7250 (194)

4 650 (125)

81 50 (218)

80 (5.52) 100 (6.90) 125 (8.62)

5 850 (157)

1 3750 (369) 17100 (458)

8 700 (233)

10 750 (288) 12850 (344) 15 750 (422)

10 (0,69) 15 (1,03) 20 (1.38)

300 (8.04) 350 (9.38) 350 (9.38)

400 (10.7) 450 (12.1) 650 (17.4)

350 (9.38) 650 (17.4)

25 (1.72) 30 (2,07) 40 (2.76)

450 (12.1) 700 (18.8) 700 (18.8)

800 (21,4) 900 (24.1) 1100 (29.5)

45 (3.10) 50 (3.45) 60 (4,14)

750 (20.1) BOO (21.4)

1100 (29.5) 1200 (32.2)

850 (22.8)

1 303 (34.8)

80 (5.52) 100 (6.90) 125 (8.62)

950 (25.5) 1 050 (28.1) 1050 (28.1)

1 600 (42.9) 1 950 (52.3) 2 350 (62.9)

1 600 (42.9) 2 600 (69.7)

10 (0.69) 15 (1.03) 20 (1.38)

400 (10.7) 450 (12.1) 450 (12.1)

500 (13.4) 550 (14.7)

650 (17.4) 850 (22.8)

25 (1.72) 30 (2.07) 40 (2,76)

550 (14.7) 800 (21.4) 1 050 (28.1)

45 (3.10) 50 (3,45) 60 (4.14)

1 350 (36.2) 1 450 (38.9) 1 600 (42.9)

2100 (56,3)

2 600 (69.7) 2 850 (76.4)

2 300 (61.6)

3100 (831)

BO (5.52)

2150 (57.6)

3000 (80.4)

100 (6.90) 125 (8.62)

2 450 (65,7) 2 600 (69.7)

3 700 (99.2)

4 003 (107) 4 950 (133)

(0.20 bar)

7250 (194)

3000 (80.4) 4 750 (127)

5250 (141) 6000 (161)

5850 (157)

7 550 (202)

8800 (236) 9 300 (249) 11 000 (295)

4900 (131) 6 703 (180)

8150 (218) 9 700 (260) 12 250 (328)

400 (10.7) 850 (22.8)

450 (12,1) 1100 (29.5) 1 350 (36.2)

1 500 (40.2) 1 900 (50.9)

1900 (50.9)

900 (24.1)

650 (17.4)

1 300 (34.8) 1 750 (46.9)

1 550 (41,5)

2200 (58.9)

900 (24.1) 1850 (49.6) 2400 (64.3)

2 700 (72.4)

3550 (95,1)

1200 (322)

1 300 (34.8) 1 300 (34.8) 1 450 (38.9)

2100 (56.3)

1800 (48.2) 2150 (57.6)

13050 (350)

1 350 (36.2)

1 200 (32.2)

1 350 (362)

1 0300 (276) 12 200 (327)

13 650 (366) 151 00 (405) 16 650 (446)

950 (25.5)

11 00 (29.5)

1 900 (50,9)

3 550 (95.1)

1 050 (28.1) 11 50 (30.8)

1 600 (42.9)

1 650 (44.2)

8 550 (229)

400 (10.7) 750 (20.1) 900 (241 )

1 250 (33.5)

3800 (102) 5350 (143)

6400 (172)

700 (188)

1 000 (26.8)

4450 (119)

1 850 (49,6)

2 303 (61.6) 2 300 (61.6)

2 300 (61,6) 2 803 (75.0) 3500 (93.8)

2 BOO (75.0)

3700 (992) 4 300 (115) 4 400 (118)

4450 (119)

7-1 - Shaded yeas show where ancicated droop would be exceeded regarcless of capacity 7-1 - Shaded areas show where maximum operating inlet pressure for a gven port darneter is exceeded

25

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 10. Types S201P. S202P. S203P. S208P. and S209P Capacities

OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

6-inches w c (15 mbar) 1D892627022 ± 1-inch w c (2.5 mbar)

CAPACITIES IN SCFH (Nrn'fh) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

INLET PRESSURE.

1-1/2 and 2-Inch (DN 40 and 50) Body Sin

Orifice Sin. Inch es (mm)

PSIG (bard

1/4 (6.35)

3/8 (9.52)

1/2 (12.7)

1D892727012

±1-inchwc (2.5 mbar)

11-inches w c (27 mbar)

900 (24.1) 1150 (30.8)

1300 1650

(34.8) (44.2)

2 0 (0.14) 50 (0.34) 13 (0.90)

600 (16.1) 1000 (26.8) 1650 (442)

1400 (37.5) 2300 (61.6) 3700 (99.2)

2000 (53.6) 3500 (93.8) 6200 (166)

3500 (93.8) 5700 (153) 10000 (268)

4200 (113) 7300 (196) 13500 (362)

25 (1,72) 60 (4.14) 100 (6.90) 125 (8.62)

2400 (64.3) 4400 (118) 7000 (188) 7000 (188)

13500 (362) 13500 (362)

13500 (362)

5200 9600 13500 13500

(139) (257) (362) (362)

9000 (241) 13500 (362) 13500 (362)

0 5 (0.034) 1 0 (0,069) 1 5 (0.10)

400 (10.7) 500 (13.4)

800 (21.4) 1050 (28.1)

1200 1500

2 0 (0.14) 50 (0.34) 13 (0.90)

600 (161) 1000 (26.8) 1650 (44.2)

1300 (34.8) 2100 (56.3) 3300 (88.4)

1800 (48,2) 3100 (83.1) 5500 (147)

25 (1,72) 60 (4.14) 100 (6.90) 125 (8.62)

2400 (64.3) 4400 (118) 7000 (188) 7000 (188)

05 10 15 20 50

1D893227032

(0.034) (0.069) (0.10) (0,14) (0,34)

(5 mbar)

20-inches w c (50 mbar) 1D893327032 ± 3-Inches w c (7.5 mbar) 1 ps4g

(0,069 bar) 1H975827032

±02psig (0.014 bar) 3 psig(1)

(0.21 bar1) 1H975927032

±0 6psig (0.041 bar)

375 475 550 950

(10.1) (12.7) (14.7) (25.5)

5000 9400 13500 13500

(134) (252) (362) (362)

(32.2) (40.2)

8000 (214) 13500 (362) 13500 (362)

750 (20.1) 1000 (26.8) 1250 (33.5)

1100 (29.5) 1450 (38.9) 1700 (45.6)

2000 (53.6)

2900 (77.7)

1550 (41,5) 2260 (60.6) 4200 (113) 6600 (177) 6600 (177)

3100 4700 8903 13500 13500

(83.1) (126) (239) (362) (362)

5100 8000 13500 13500

(137) (214) (362) (362)

300 500 850 1350

(8.04) (13.4) (22.8) (36.2)

500 950 1700 2800

(13.4) (25.5) (45,6) (75.0)

950 1500 2400 4400

(25.5) (40.2) (64.3)

25 (1.72) 60 (4,14) 100 (6.90) 125 (8.62)

2000 3700 6000 6000

(53.6) (99.2) (161) (161)

4800 9000 13500 13500

(129) (241) (362) (362)

2 0 (0.14) 6 0 (0.41) 14 (0.97)

500 (13.4) 1100 (29.5) 1500 (40.2)

(2.07) (4.14) (6,90) (8.62)

2300 (61.6) 4400 (118) 7000 (168) 7000 (188)

3 0 (0.21) 70 (0.48) 14 (0.97)

500 (13.4) 1000 (26.8) 1500 (40.2)

13 (0.90) ± 2-1nches w c

1 (25.4)

400 (10.7) 500 (13.4)

(0,028) (0.034) (0.069) (0.10)

04 (0.028) 7-inches w c (17 mbar)

3/4 (191) 1200 (32.2) 1600 (42.9) 2300 (61.6) 3000 (80.4)

04 05 10 15

25 (1.72) 60 (4.14) 100 (6.90) 125 (8.62) 1 0 (0.069) 2 0 (0,14) 5 0 (0.34) 13 (0.90)

30 60 100 125

30 60 100 125

(2.07) (4,14) (6.90) (8.62)

2400 4300 6800 6800

(64.3) (115) (182) (182)

750 (20.1) 1800 (482) 3000 (80.4)

4800 9200 13500 13500

(129) (247) (362) (362)

1000 (26.8) 2200 (59.0) 3000 (80,4)

5000 9400 11400 11400

(134) (252) (306) (306)

(118)

6600 (177) 12700 (340) 13500 (362) 1100 (29.5) 2500 (67,0) 4500 (121)

7000 (188) 10500 (281) 13500 (362) 1500 (40.2) 3400 (91,1) 5700 (153)

7500 (201) 11500 (308) 13500 (362)

950 1500 2000 2550

(25.5) (40.2) (53.6) (68.3)

1500 1900 2900 3600

1350 1700 2600 3200

(40.2) (50.9) (77.7) (96.5)

(36.2) (45.6) (69.7) (85.8)

3000 (80.4) 5000 (134) 8600 (230)

3700 (992) 6500 (174) 12000 (322)

13500 (362) 13500 (362)

13500 (362)

1450 (38.9) 1800 (48.2) 2400 (64.3) 3000 (80.4) 4800 (129)

1650 (442) 2500 (67.0) 3100 (83,1) 3600 (96.5) 6500 (174)

9000 (241) 13500 (362) 13500 (362)

1000 2000 4000 6500

(26,8) (53.6) (107) (174)

10000 (268) 13500 (362)

1400 (37,5) 4000 (107) 7000 (188)

11000 (295) 13500 (362)

1300 2900 5000 8700

(34.8) (77.7) (134) (233)

1-3/16 (30,2) 1750 2200 3300 4300

(46.9) (59.0) (88.4) (115)

5500 (147) 7700 (206) 13500 (362)

1550 1950 3000 4100

(41,5) (52.3) (80.4) (110)

5000 (134) 7000 (188) 13500 (362)

1850 2900 3900 4800 6700

(49,6) (77,7) (105) (129) (180)

13500 (362)

2000 4000 5300 13500

(53.6) (107) (142) (362)

13500 (362)

2400 (64,3) 5200 (139) 9000 (241)

11000 (295) 13500 (362)

13500 (362)

2000 (53.6) 5700 (153) 10000 (268)

3200 (85.8) 7000 (188) 11000 (295)

13500 (362) 13500 (362)

13500 (362)

3000 (80.4) 7000 (188) 13500 (362)

3600 (96.5) 8800 (236) 13500 (362)

Type 821)3P is lilted 02 psg (U14 bar)

r-i - Shaded areas inck ate where droop would be exceeded regarcless or capa ty = - Shaded areas inck ate where f113 mum operating inlet pressure for a gven ()Mc() size is exceeded

25

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 11. Types S204. S2041-1. S206, and S206H Capacities CAPACITIES IN SCFH (NnV/h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS

I

TYPE

OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

INLET PRESSURE. PS IG (bar)

-

1-1/2-Inch (DN 40) Body Sin

Orific* Sin. Inches (mm) 318 (9.52)

1/2 (12.7)

518 (15,9)

1 (25.4)

1-3/16 (30.2) 1 700 (45,6)

3000 (80.4) 3500 (93.8) 3800 (102)

1400 (37.5) 2200 (59.0) 3000 (80.4) 3850 (103) 4100 (110) 4600 (123)

0 5 (0.034) 1 0 (0.069) 2 0 (0,14)

5-Indies w c (12 mbar)

50 (0.34)

10892527022 or

10892627022 ± 1 -inch w c

(2.5 mbar)

7 (0.48) 15 (1,03)

1200 (322)

20 (1.38) 30 (2,07) 60 (4.14) 75 (5,17) 100 (6.90)

1500 (40.2) 1900 (50.9) 3000 (80,4) 3800 (102) 4800 (129)

2000 3400

(53,6) (91,1)

380 0 (102)

4000 (107) 4700 (126) 550 0 (147) 700 0 (188)

4300 (115) 4600 (123) 5100 (137) 5800 (155)

05 (0.034) 7-inches ve c

(17 mbar) 10892727012 ± 1-inch w c (2.5 mbar) S204, S206

1200 (322)

20 (1.38) 30 (2.07) 60 (4,14) 75 (5.17) 100 (6.90)

1500 (40.2) 1900 (50.9) 3000 (80.4) 3800 (102) 4800 (129)

2000 3400

(53.6) (91.1)

3000 (80,4) 3500 (93,8) 3800 (102)

380 0 (102)

430 0 (115)

4000 (107) 4700 (126) 5000 (134) 7000 (188)

4500 (121) 5100 (137) 5200 (139)

0 5 (0.034) 1 0 (0.069)

20 (0.14)

11-inches w c (27 mbar)

5 0 (0.34) 7 (0.48) 15 (1.03)

10893227032

20 (1.38) 30 (2.07) 60 (4.14) 75 (5,17) 100 (6.90)

± 2-inches w c (5 rnbar)

20-inches w c (50 mbar)

10893327032 ± 3-inches w c (7,5 mbar) .

1 psis)

(0.069 bar) 1H975827032 ± 0 2 psi (0.014 bar)

5204H. S2 06H

1200 (32.2) 1400 (37,5)

1800 (482) 3000 (80,4) 3600 (96.5) 4500 (121)

2000 (53.6) 3400 (91,1) 4000 (107) 5300 (142) 6100 (164) 6800 (182) 8400 (225)

1 0 (0,069) 2 0 (0,14) 5 0 (0,34) 7 (0.48) 15 (1,03)

1100 (29,5)

340 0 (91,1)

20 (1.38) 30 (2.07) 60 (4.14) 75 (5,17) 100 (6.90)

1300 (34.8) 1700 (45.6) 3000 (80.4) 3500 (93.8) 4400 (118)

4000 (107)

2 (0.14) 5 (0.34) 8 (0,55) 15 (1,02) 20 (1,38) 30 (2.07) 60 (4,14) 75 (5,17) 100 (6,90)

2000 (53.6)

5200 (1 39)

6700 (180) 7750 (208) 8800 (236)

1400 (37.5)

2000 (53.6) 3400 (91,1) 3800 (102)

1800 (48,2) 3000 (80.4) 3600 (96.5) 4600 (123)

5300 (142) 7400 (198) 8500 (228) 9600 (257)

1200 (322)

2800 (75.0) 3000 (80.4) 4400 (118) 500 0 (134)

5800 (155) 6700 (180) 7400 (198)

1H975927032

± 06 psi (0,041 bar)

5 (0.34) 8 (0.55) 15 (1,02) 20 (1,38)

1200 (322) 1400 (37,5)

30 (2.07) 60 (4,14) 75 (5.17) 100 (6.90)

1900 (50.9) 3100 (83,1) 3800 (102) 4800 (129)

2600 (69.7) 3900 (105) 460 0 (123)

6900 (185) 9000 (241) 10000 (268) 11500 (308)

2300 (61.6) 3200 (85.8) 4100 (110) 4400 (118) 4600 (123)

4800 (129) 4900 (131)

1400 (37,5) 2200 (59.0) 2700 (72.4) 3700 (99.2) 3900 (105) 4400 (118)

1600 (42.9) 2300 (61,6) 3000 (80,4) 3900 (105) 4100 (110) 4600 (123)

4600 (123) 4700 (126)

1000 (26,8) 1700 (45.6) 2700 (72.4) 4100 (110) 4600 (123) 5200 (139)

1100 (29.5) 2000 (53.6) 3000 (80.4) 4500 (121) 5000 (134) 5400 (145)

5800 (155) 6400 (172)

2500 (67,0) 3100 (83.1) 4400 (118)

1600 (42,9) 2600 (69.7) 4000 (107) 4500 (121) 5500 (147)

5000 (134) 5900 (158)

6000 (161) 6800 (182)

1750 (46,9) 2800 (75.0) 4300 (115) 4700 (126) 5900 (158)

730 0 (196)

7750 (208)

2000 (53.6) 2400 (64.3) 4400 (118) 5000 (134) 6200 (166) 8800 (236) 9500 (255)

3 (021) 3 psig (0.21 bar)

E-1-

1 0 (0.069) 2 0 (0.14) 5 0 (0,34) 7 (0.48) 15 (1,03)

-

1600 (42.9) 4000 (107) 4900 (131) 6300 (169) 6900 (185)

1900 (50.9) 4500 (121) 5500 (147) 7000 (188)

8300 (222)

1800 (482) 4000 (107) 6000 (161) 9000 (241)

2200 (59.0) 3000 (80,4) 4800 (129) 5900 (158)

10500 (281)

8000 (214)

13000 (348)

2100 (56.3) 5000 (134) 8000 (214) 10000 (268)

1100 0 (295)

14000 (375)

Shaded areas indicate where droop would be exceeded regardless cit capacity

= - Shaded areas incicate where maximum operating

inlet pressure for a coven orifice size ts exceeded

continued 27

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Table 11. Types S204. S204H, S206, and S206H Capactes (continued) CAPACITIES IN SCFH (NnV/h) OF 0.6 SPECIFIC GRAVITY NATURAL GAS TYPE

OUTLET PRESSURE. SPRING PART NUMBER. AND ACCURACY

INLET PRESSURE. PSIG (bar)

1-1/2-Inch (DN 40) Body Size

Orifice Size, Inches (nwn) 3/8 (9.52)

5-inches w c (12 mbar)

50 (0.34) 1200 (32.2)

± 1-inch w c (2.5 mbar)

20 (1.38) 30 (2.07) 60 (4,14) 75 (5,17) 100 (6.90)

1500 (40.2) 1900 (50.9) 3200 (85.8) 390 0 (105) 4900 (131)

7-inches w c (17 mbar)

0 5 (0.034) 1 0 (0,069) 2 0 (0.14) 5 0 (0,34) 7 (0.48) 15 (1.03)

1200 (32.2)

20 (1.38) 30 (2,07) 60 (4.14) 75 (5,17) 100 (6.90)

1500 (40.2) 1900 (50.9) 3200 (85.8) 3900 (105) 490 0 (131)

or

1089262 7022

1D692727012 ± 1-mch w c (2.5 mbar) S204.

S206

11- inches w c (27 mbar)

10893227032 ± 2-inches w c (5 mbar)

518 (15,9)

1 (25.4)

1-3116 (30.2)

3000 (80.4) 3600 (96.5) 4000 (107)

1400 (37,5) 2400 (64.3) 3500 (93.8) 4000 (107) 4300 (115) 4800 (129)

1800 (48.2) 2800 (75,0) 3800 (102) 4200 (113) 4500 (121) 5000 (134)

0 5 (0,034) 1 0 (0.069) 2 0 (0,14)

7 (0.48) 15 (1.03)

10892527022

112 (12.7)

2100 3500

(56.3) (93.8)

4000 (107) 4200 (113) 490 0 (131) 580 0 (155) 7200 (193)

4500 (121) 4800 (129) 5300 (142) 6000 (161)

1400 (37,5) 2400 (64.3) 3400 (91 .1 )

0 5 (0.034) 1 0 (0,069) 2 0 (0.14) 5 0 (0.34) 7 (0.48) 15 (1.03)

1200 (32.2)

20 (1.38) 30 (2.07) 60 (4.14) 75 (5,17) 100 (6.90)

1400 (37.5) 1800 (48.2) 3000 (80.4) 3600 (96,5) 4500 (121)

2100 3500

(56.3) (93,8)

400 0 (107) 4200 (113)

4900 (131) 5700 (153) 7200 (193)

2000 (53.6) 3500 (93.8) 400 0 (107)

5400 (145) 6200 (166) 7000 (188) 8800 (236)

3000 (80.4) 3600 (96,5) 4000 (107)

3900 (105) 4000 (107) 4500 (121)

4500 (121) 4700 (126) 5300 (142)

4700 (126) 4800 (129)

2800 (75.0) 3100 (83.1) 4500 (121) 5200 (139) 6000 (161) 6800 (182) 7500 (201)

10893327032 ± 3-Inches w c (7,5 mbar)

1 psig (0.069 bar) 1H975827032 ± 0 2 psi (0.014 bar) S2041-I.

S206H

2 0 (014) 5 0 (0.34) 7 (0.48) 15 (1,03) 20 (1,38) 30 (2.07) 60 (4.14) 75 (5,17) 100 (6.90)

1100 (29.5) 1300 (34.8) 1700 (45.6) 300 0 (80.4)

3500 (93.8) 4400 (118)

2000 (53.6) 3500 (93.8) 4000 (107) 5400 (145) 6900 (185) 7750 (208) 9500 (255)

2500 (67.0) 3100 (83.1) 450 0 (121)

5200 (139) 600 0 (1 61)

1200 (32.2) 1400 (37.5)

2000 (53.6) 3500 (93,8) 4000 (107)

30 (2.07) 60 (4,14) 75 (5.17) 100 (6.90)

1800 (48.2) 3000 (80.4) 3600 (96.5) 4600 (123)

5500 (147) 7500 (201) 9000 (241) 10000 (268)

1H 975927032

± 0 6 psi (0.041 bar)

5 (0,34) 8 (0.55) 15 (1,02) 20 (1.38)

1200 (32.2) 1400 (37.5)

2600 (69.7) 4000 (107) 4700 (126)

30 (2.07) 60 (4.14) 75 (5,17) 100 (6.90)

1900 (50.9) 3100 (83.1) 3800 (102) 4800 (129)

7000 (188) 9200 (247) 12000 (322) 13500 (362)

1400 (37,5) 2500 (67,0) 3900 (105) 5000 (134) 5200 (139) 5500 (147)

6000 (161) 6500 (174)

1600 (42.9) 2700 (72,4) 4100 (110) 4600 (123) 5800 (155)

1 750 (46.9)

3200 (85,8) 4500 (121) 4800 (129) 6000 (161)

6200 (166) 7000 (188)

7700 (206) 7750 (208)

2000 (53.6) 2400 (64.3) 4500 (121) 5200 (139)

4200 (113) 5200 (139) 6500 (174) 7200 (193)

6500 (174) 9200 (247) 10000 (268)

8500 (228)

3 (021) 3 psig (0.21 bar)

1100 (29.5) 2100 (56.3) 3500 (93.8) 4500 (121) 4900 (131) 5400 (145)

1800 (482)

2 (0,14) 5 (0.34) 8 (0.55) 15 (1,02) 20 (1,38)

1700 (45.6) 2700 (72.4) 3700 (99.2) 4000 (107) 4200 (113) 4700 (126)

5400_.ai45).*

1 0 (0.069) 20-inches w c (50 mbar)

5000 (134) 5000 (134)

2200 (59,0) 3100 (83.1) 500 0 (134)

6200 (166) 8500 (228) 13000 (348) 16000 (429)

2000 (53.6) 4500 (121) 7000 (168) 10000 (268) 12000 (322)

2100 (56.3) 4800 (129) 6000 (161) 7500 (201)

2500 (67.0) 5500 (147) 8400 (225) 13000 (348)

16000 (429)

En - Shaded areasincicate where droop would be exceeded regardess ol capacity r--t - Shaded areas indcate where maximum operating nlet pressure for a given orifice size is exceeded

28

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 14.12 (359)

A

7

1-INCH

NPT

D

9.75 (248)

SCREENED

(MAXIMUM) , .

41.

Sao

VP"

12 88

027)

V.;

. a.

h.o..11/. .r.

.ao

IMD

8

.

'V?

11m

'II. 'qes

A

V

C 1

3)4-INCH NPT CONTROL LINE TAPPING FOR TYPES WITH EXTERNAL REGISTRATION

INCHES

(mm)

ALL NPT BODIES EXCEPT TYPE 5203

)

D

(MAXIMUM)

4 141P7 S $4 (14$)_). r LA k CM 64(189)

II

5.82 (148)

I

1/4-INCH NPT VENT

INTEGRAL MONITOR BODIES

INTEGRAL SLAM-SHUT

FLANGED

A

BODY SIZE, INCHES (DN)

NPT

1-1/4 (32) 1-1/2 (40)

612 (155) 612 (155)

1-1/2 x 2 (40 x 50) 2 (50)

.

p ACC 0 94(24) FOR * 4 TYPES S204AND S204H

D

125A FF or 150 RF

250A FF or 300 RF

Flanged

Flanged

PN 10/16

B

All Other Types

C

Flanged

Monitor

NPT

11 06 (281) 11 06 (281)

1812 (460) 1812 (460)

419 (106) 419 (106)

1 44 (37) 1 44 (37)

11 06 (281) 10 62 (270)

1 8 12 (460)

4 19 (106) 4 62 (117)

1 44 (37)

Flanged

SHIPPING WEIGHT, POUNDS (KG)

2 8 (12,7) 6 12 (1 55)

612 (155)

10 00 (254)

10 50 (267)

1019 (259)

17 6 (447)

1 BB (48)

2 19 (56)

Figure 12. S200 Series Dimensions

OUTLET POSITION 1 (STANDARD)

POSITION 3

POSITION 2

POSITION 4

Figure 13. Body Positions and Spring Case Vent Locations

29

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Ordering Guide Type, See table 1 (Select One) Type S201 (without internal relief) Type S201H (Type S201 for outlet pressures up to 5 psig (0,35 bar)) Type S201K (Type S201 for outlet pressures up to 10 psig (0,69 bar)) Type S201KP (Type S201K with external pressure registration) Type S201P (Type S201 with external pressure registration) Type S202 (Type S201 with internal relief) Type 5202H (Type S202 for outlet pressures up to 5 psig (0,35 bar)) Type 5202P (Type S202 with internal relief) Type S203 (Type S201 with integral monitor) Type 5203H (Type S203 for outlet pressures up to 5 psig (0,35 bar)) Type S203P (Type S203 with external registration) Type S204 (Type S201 with low outlet pressure shutoff) Type 5204H (Type S204 for outlet pressures up to 3.25 psig (0,22 bar))

Type S206 (Type S204 with internal relief) Type 5206H (Type S206 for outlet pressures up to 3.25 psig (0,22 bar))

Type S208 (Type S201 with slam-shut device) Type 5208H (Type S208 for outlet pressures up to 5 psig (0,35 bar)) Type 5208K (Type S208 for outlet pressures up to 10 psig (0,69 bar)) Type 5208P (Type S208 or 5208H with external pressure registration) Type S208PK (Type S208K with external pressure registration) Type S209 (Type S208 with internal relief) Type S209H (Type S209 for outlet pressures up to 5 psig (0,35 bar)) Type S209P (Type S209 or S209H with external pressure registration)

Body Size, Material, and End Connections -See table 1 (Select One) 1-1/4-inch (DN 32) Cast Iron (not available for Type S208 or S209)

NPT' BSP*

1-1/2-inch (DN 40) Cast Iron (not available for Type S208 or S209)

NPT' BSP*

1-1/2-inch (DN 40) Ductile Iron (not available for Type S203, S204, or S206)

NPT' BSP*

1-1/2-inch (DN 40) Steel (not available for Type S204, S206, S208, or S209)

NPT' BSP*

1-1/2 x 2-inch (DN 40 x 50) Ductile Iron (not available for Type S203, S204, or S206)

NPT' BSP*

2-inch (DN 50) Cast Iron (not available for Type S208 or S209)

NPT' BSP*

125B FF-7.5-inches' 125B FF-10-inches'

250B RF' 2-inch (DN 50) Ductile Iron (not available for Type S203, S204, or S206)

NPT' BSP*

125 FF' 250 RF' PN 10-16' 2-inch (DN 50) Steel (not available for Type S204, S206, S208, or S209)

NPT' BSP*

150 RF' 300 RF' PN 10-16'

Outlet Pressure Ranges (Select One) Type S201, S201P, S202, or 5202P 2 to 4.5-inches w.c. (5 to 11 mbar)*** 3.5 to 6.5-inches w.c. (9 to 16 mbar) * ** 5 to 9-inches w.c. (12 to 22 mbar)*** 8.5 to 18-inches w.c. (21 to 45 mbar)*** 14 to 30-inches w.c. (35 to 75 mbar)***

Type S201H, S201P, 5202H, or 5202P

1 to 2 psig (0,069 to 0,14 bar)' 1.5 to 3.25 psig (0,10 to 0,22 bar)*** 2 to 5 psig (0,14 to 0,34 bar)***

Type S201K or S201PK 2 to 5.5 psig (0,14 to 0,38 bar)*** 4 to 10 psig (0,28 to 0,69 bar) * **

Type S203 or 5203P 2 to 4.5-inches w.c. (5 to 11 mbar)*** 3.5 to 6.5-inches w.c. (9 to 16 mbar) * ** 5 to 9-inches w.c. (12 to 22 mbar)*** 8.5 to 18-inches w.c. (21 to 45 mbar)*** 14 to 30-inches w.c. (35 to 75 mbar)***

continued

30

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200 Outlet Pressure Ranges (Select One) (continued) Type S203H or S203P 1 to 2 psig (0,069 to 0,14 bar)*** 1 5 to 2 25 psig (0,10 to 0,16 bar)*** 1 5 to 3 25 psig (0,10 to 0,22 bar)***

Types S204 and S206 3 5 to 5 inches w c (9 to 12 mbar)" 5 to 7 inches W c (12 to 17 mbar)" 6 5 to 9 5 inches w c (16 to 23 mbar)*** 8 5 to 18 inches w c (21 to 45 mbar)" 14 to 30 inches w c (35 to 75 mbar)" Types S204H and S206H 1 to 2 psig (0,069 to 0,14 bar)" 1 5 to 3 25 psig (0,10 to 0,22 bar)*" Type S208, S208P, S209, or S209P

3 5 to 6 5-inches w c (9 to 16 mbar)" 5 to 9- inches w c (12 to 22 mbar)" 8 5 to 18 inches w c (21 to 45 mbar)*" 14 to 30-inches w c (35 to 75 mbar)" Type S208H, S208P, S209H, or S209P 1 to 2 psig (0,069 to 0,14 bar)*** 1 5 to 3 25 psig (0,10 to 0,22 bar)" 2 to 5 psig (0,14 to 0,34 bar)***

Type S208K or S208PK 2 to 5 5 psig (0,14 to 0,38 bar)" 4 to 10 psig (0,28 to 0,69 bar)***

Body Position (Select One) Position 1 (standard) Position 2**

Position 3" Position 4"

Vent Position (Select One) Position C**

Position D (standard Position F** Position F**

Type VSX-2 Trip Spring Range (Select One) Overpressure (OPSO) Trip Only (supply high trip pressure) Indicate trip point Over and Underpressure (UPSO) Trip (supply high and low trip pressure) Indicate trip points over under

Type VSX-2 Pressure Registration (Select One) Internal*** External***

Orifice Size (Select One) 1/4-inch'' (6,4 mm) 11" 3/8-inch (9,5 mm )"* 1/2-inch (12,7 mm)*** 3/4-inch (19,1 mm)*** 1-inch (25,4 mm)*** 1 -3/1 6- inch (30,2 mmr** 1/44nch (6,4 mm) ()Nice not wadable for Types S204 and S206

Specification Worksheet

Application: Specific Use Line Size Gas Type and Specific Gravity Gas Temperature Does the Application Require Overpressure Protection?

No If yes, which is preferred El Yes El Relief Valve Cl Monitor Regulator C1 Shutoff Device Is overpressure protection equipment selection assistance desired?

Pressure: Maximum Inlet Pressure (Pin,...)

Minimum Inlet Pressure (P,,,,n) Downstream Pressure Settings) (P2)

Fisher Regulators Quick Order Guide

.

Maximum Flow (Om)

Standard Readily Available for Shipment

Performance Required:

Non-Standard Allow Additional Time for Shipment

Accuracy Requirements?

Need for Extremely Fast Response?

Special Order, Constructed from Non-Stocked Parts Consult Your Fisher Sales Representative for Availability

Other Requirements:

Avalabaly of the product being ordered is determined by the component with the longest shipping trne for the requested construction

31

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Bulletin 71.1:S200

Industrial Regulators

Natural Gas Technologies

Industrial/High Purity

USA Headquarters

USA Headquarters

McKinney, Texas 75050 USA Tel 1-800-558-5856 Outside U S 1-469-293-4201

McKinney, Texas 75050 Tel 1-800-558-5856

TESCOM Elk River, Minnesota 55330 USA

Asia-Pacific Shanghai, China 201206 Tel 86-21-5899 7:.: 7

Asia -Pact fc

Europe Bologna, Italy 40013 Tel 39 051 4190611

Europe

Outside US 1-469-293-4201

Tel 1-763-241-3238 Selmsdort, Germany 23923 Tel +49 (0) 38823 31 0

Singapore, Singapore 128461 Tel +65 6777 8211 Bologna, Italy 40013 Tel 39 051 4190611 Gallardon, France 28320 Tel +33 (0)2 37 33 47 00

For turner information visit www ernersonprocass corn/regulators The Emerson logo IS a trademark and service mark of Emerson Electric Co All other marks are the property of their prospective owners Fisher IS a mark owned by Fisher Controls. Inc . a business of Emerson Process Management The contents of this pubbcatron are presented for Informatronat purposes arty, and whte every effort has been made to ensure their accuracy, they are not to be construed as warrarrtres or guarantees, express or impted, regarding the products or services described herein or their use or appticability We reserve the right to rnochfy or rnprove the designs or specikatans of such products at any tine without notice Emerson Process Management does not assume responsibdty for the selectoon. use or mantenance of any product Responsibility for proper selection, use and maintenance of any Emerson Process FAanagement product remains solely with the purchaser

EMERSON. CF. isher Cortrols International. Inc 1981. 2006. Al Rghts Reserved

Process Management

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor