Why Gemstones Are Cut Into Cabochons And Not Faceted Stones Most people will see that although gems are taken out of mines in a rough, rocky shape, when they are sold, they are cut and polished. The reason behind this is that when quarried out of the ground, gemstones are fused to a lot or rock that no trader would agree to buy. As a result, before being sold, these minerals are cut into a specific shape in order to remove all the unwanted material. Looking at Turquoise Cabochons, the mineral is actually in a semi processed state, as it cannot be fit into a piece of jewelry in this form, but it will allow a gem cutter to turn it into a faceted stone with greater ease.
This shape also allows some craftsmen to carve intricate designs into the gemstone, although this is a technique that is rarely used anymore due to the amount of work and material required. Normally, a cabochon can be cut down to make one or more faceted stones, while engraving it will lock all of the material for only one purpose. Not all gemstones are created equal Regardless of the type of gem, they all have different grades of purity. Considering the fact that they must be mined out of the ground, it is often difficult to find a stone that does not have any unwanted materials in its composition. However, jewelers buy several grades of minerals in order to make jewelry that will be affordable to a larger range of budgets. The only case in which craftsmen will throw a stone if it is too small to work with, but other than that, gemstones are rarely wasted.