G
GUYED TOWERS - 45G
S TA N D A R D 4 5 G G U Y E D T O W E R
ROHN 45G The first. The original.
includes
REV. F & REV. G
45G
GENERAL USE The 45G is a true multi-use structure that provides excellent strength for applications up to 300’, It is offered with heavy steel round legs to satisfy a variety of needs under varied conditions.
FEATURES • Completely hot-dip galvanized after fabrication • Built on a 16 3/4” equilateral triangle design • High strength tubular legs joined by Zig-Zag®
cross members • Each section contains all required nuts and bolts shipped with section • Continuous solid round steel bracing
CAUTION Mixing copies of ROHN towers with ROHN towers is dangerous and voids all engineering and warranty data supplied by ROHN. Materials used by others are not the same quality and have not been tested or engineered by ROHN. Mixing ROHN tower sections with non-ROHN products may cause tower failure or injury.
Per Rev G requirements, any structure greater than 10’ requires a climber safety device. Please see page 65 for ordering information.
46
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D 4 5 G G U Y E D T O W E R SECTIONS 9 11/16” 14 1/2”
QUICK REFERENCE PARTS & ACCESSORIES GROUNDING INFORMATION FOUNDATION INFORMATION
16 3/4”
1’ 6”
PAGES 63-65 PAGE 66 PAGES 66-69
2.38” O.D. 2.07” I.D.
Optional Waveguide Brackets (KY2041A) 9’ 6” 2’ 0”
1 1/4” O.D. (14 GA.)
1 1/4” O.D. (14 GA.)
7/16” O.D. Solid Bracing
7/16” O.D. Solid Bracing STANDARD TOP SECTION 45AG2 Optional double braced sections are available upon request.
Additional 45G top sections are shown on page 63.
CONCRETE BASE PLATE BPC45G* FOR USE WITH 3/4X12PP PIER PIN EMBEDDED IN CONCRETE.
STANDARD SECTION 45G - 10’ Section
Additional base sections are available, please see page 64.
* Towers mounted on these bases must be bracketed or guyed at all times. Temporary steel guying may also be necessary during installation and dismantling.
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
47
G
GUYED TOWERS - 45G
BUYERS GUIDE S TA N D A R D D E S I G N S - 4 5 G 9 0 M P H R E V. G [ 3 - S E C O N D G U S T ] 7 0 M P H R E V. F [ FA S T E S T M I L E ]
Design Criteria
EPA (SQ. FT.) For Exposure B, Revision G 23.1
31.4
31’
EPA (SQ. FT.) For Exposure C, Revision G
22.6 45’ 3/16” EHS (399#)
EPA (SQ. FT.), Revision F Guy Initial Tension
P/N 45G90R040 40’
P/N 45G90R040
Tower Model Windspeed (Rev. G)
Tower Height (ft.) ROHN Tower
EPA= Effective Projected Area
This document is to serve as a guide for sizing and purchasing the 45G tower. Tower and foundation installations should be performed by qualified and experienced personnel using assembly drawings provided with each tower. DESIGN NOTES: 1. Tower designs are in accordance with ANSI/TIA-222-F and ANSI/TIA-222-G, Class I Structures, Topographic Category 1. 2. Design assumes towers are installed on level ground. Lower EPA values will apply for roof mounted towers or for sites located on unusual terrain. 3. Designs assume two 1/2” diameter lines on each tower face. 4. Anchor radius is from tower base to intersection of anchor rod with ground. 5. Guy chord lengths shown are based on level ground. Initial tensions for guys are shown in ( ) in pounds at 60º Fahrenheit. 6. Antenna and mounts are assumed symmetrically placed at the tower top. PARTS LIST NOTES: 1. Items listed are required for complete guyed towers. 2. Base and anchor foundations listed refer to standard foundation designations. 3. Guys provided with each standard tower are based on level ground conditions with an additional 6% length. 4. Rev G anchor grounding (AGK1GGX) and base grounding (BGK3GGX) are included with the tower material. 5. Assembly drawings and a safety package (P/N: ACWS) are included with each tower. 6. Parts lists are subject to change based on availability or revised design criteria. FOR FOUNDATION INFORMATION, PLEASE SEE PAGES 66-69. FOR GENERAL INSTALLATION INFORMATION, PLEASE SEE PAGES 147-153.
48
Phone (309) 566-3000 • Fax (309) 566-3079• www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
49
G
GUYED TOWERS - 45G
S TA N D A R D D E S I G N - 4 5 G 9 0 M P H R E V. G , 7 0 M P H R E V. F 90’ TOWER 25.0 OR 19.4
85’
17.6 111’ 3/16” EHS (399#)
45’
85’
72’
P/N: 45G90R090 100’ TOWER 24.3 OR 18.9
85’
17.0 117’ 1/4” EHS (665#)
45’
92’
3/16” EHS (399#)
80’
P/N: 45G90R100 110’ TOWER 23.6 OR 18.6
105’
16.4 137’ 3/16” EHS (399#)
65’ 109’ 35’
95’ 88’
P/N: 45G90R110
120’ TOWER 23.0 OR 18.2
105’
16.0 142’ 3/16” EHS (399#)
65’ 116’ 35’
1/4” EHS (665#)
102’ 96’
P/N: 45G90R120 130’ TOWER 22.5 OR 17.9
125’
15.6 163’ 3/16” EHS (399#)
85’ 134’ 45’
113’ 104’
P/N: 45G90R130
50
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
45G
45AG2
BPC45G
8
1
1
3/16EHS
BG2142
625’
12
FDNS GA45GD BASE ANCHOR 2
CB1G AB2
5/16THH 1/2TBE&J TBSAFETY 12
6
3 3/4x12PP
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
9
1
1
3
1
FDNS GA45GD BASE ANCHOR 2
CB1G AB2
GUYS & CONNECTIONS INCLUDED
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J
ANCHORS & GROUNDING INCLUDED
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
300’
6
375’
3
3
1
1
3
45G
45AG2
BPC45G
10
1
1
3/16EHS
BG2142
1100’
18
6
6
6
6
FDNS GA45GD BASE ANCHOR CB1G AB2
3
18
3
9
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 1
3
45G
45AG2
BPC45G
11
1
1
1
3
FDNS GA45GD BASE ANCHOR 3
CB1G AB2
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J
ANCHORS & GROUNDING INCLUDED
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
12
475’
3
3
1
1
3
45G
45AG2
BPC45G
12
1
1
3/16EHS
BG2142
1325’
18
1
3
3
CB1G AB2
5/16THH 1/2TBE&J TBSAFETY 18
3
120’ ROHN 45G Al l par ts shown i n tabl e a re i nc l uded when order i ng Par t No: 45G90R 120
FDNS GA45GD BASE ANCHOR
9
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
9
6
12
6
110’ ROHN 45G Al l par ts shown i n tabl e a re i nc l uded when order i ng Par t No: 45G90R 110
3/4x12PP
GUYS & CONNECTIONS INCLUDED
700’
100’ ROHN 45G Al l par ts shown i n tabl e a re i nc l uded when order i ng Par t No: 45G90R 100
3
5/16THH 1/2TBE&J TBSAFETY
3
90’ ROHN 45G Al l par ts shown i n tabl e a re i nc l ud ed when ord er i ng Par t No: 45G90R 090
3
3
130’ ROHN 45G Al l par ts shown i n tabl e a re i nc l uded when order i ng Par t No: 45G90R 130
3/4x12PP 1
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D D E S I G N - 4 5 G 9 0 M P H R E V. G , 7 0 M P H R E V. F 140’ TOWER 22.0 OR 17.6
125’
15.2 168’ 1/4” EHS (665#)
85’ 141’ 45’
3/16” EHS (399#)
121’ 112’
P/N: 45G90R140
145’ 105’
150’ TOWER 21.6 OR 17.4 14.8 188’ 159’
65’ 35’
3/16” EHS (399#)
136’ 125’ 120’
P/N: 45G90R150
145’ 105’
160’ TOWER 21.2 OR 17.1 14.4 193’ 166’
65’ 35’
144’
1/4” EHS (665#) 3/16” EHS (399#)
133’ 128’
P/N: 45G90R160
165’ 125’
170’ TOWER 20.8 OR 16.9 14.2 214’ 185’
85’ 45’
160’
1/4” EHS (665#) 3/16” EHS (399#)
143’ 136’
P/N: 45G90R170
165’ 125’
180’ TOWER 20.5 OR 16.7 14.0 219’ 191’
85’ 45’
167’
1/4” EHS (665#) 3/16” EHS (399#)
151’ 144’
P/N: 45G90R180
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
45G
45AG2
BPC45G
13
1
1
GA45GD BASEFDNS ANCHOR 3
CB1G AB2
850’
6
12
550’
12
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
14
1
1
3/16EHS
BG2142
1950’
24
3
1
3
FDNS GA45GD BASE ANCHOR 4
CB1G AB2
24
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
15
1
1
Al l par ts shown i n tabl e a re i nc l ud ed when ord er i ng Par t No: 45G90R 150
3
12
3/4x12PP 1
3
GA45GD BASEFDNS ANCHOR 4
CB1G AB2
160’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G90R 160
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 1425’
6
18
625’
18
12
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
16
1
1
1
3
3
FDNS GA45GD BASE ANCHOR 4
CB1G AB2
ANCHORS & GROUNDING INCLUDED
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY
ANCHORS & GROUNDING INCLUDED
150’ ROHN 45G
5/16THH 1/2TBE&J TBSAFETY
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J
GUYS & CONNECTIONS INCLUDED
Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G90R 140
9
6
GUYS & CONNECTIONS INCLUDED
TOWER PARTS INCLUDED
140’ ROHN 45G
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J
1575’
18
700’
3
1
3
3
1
45G
45AG2
BPC45G
17
1
1
12
6
18
6
170’ ROHN 45G Al l par ts shown i n tabl e a re i nc l uded when order i ng Par t No: 45G90R 170
3
GA45GD BASEFDNS ANCHOR 4
CB1G AB2
180’ ROHN 45G
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 1625’
18
700’
6
18
6
12
Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G90R 180
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
3
1
3
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
51
G
GUYED TOWERS - 45G
S TA N D A R D D E S I G N - 4 5 G 9 0 M P H R E V. G , 7 0 M P H R E V. F 185’ 145’ 105’ 65’ 35’
190’ TOWER 20.2 OR 16.5 13.6 239’ 3/16” EHS 210’ (399#) 185’ 165’ 156’ 152’
P/N: 45G90R190
185’ 145’ 105’ 65’ 35’
200’ TOWER 19.8 OR 16.3 11.4 245’ 1/4” EHS 216’ (665#) 191’ 173’
3/16” EHS (399#)
164’ 160’
P/N: 45G90R200
205’
210’ TOWER 19.5 OR 16.1 11.2
165’ 125’
265’ 235’ 209’
85’ 45’
3/16” EHS (399#)
113’ 87’ 75’
168’
P/N: 45G90R210
205’
220’ TOWER 19.3 OR 16.0 11.0 270’
165’ 125’ 85’ 45’
241’ 216’
1/4” EHS (665#) 3/16” EHS (399#)
113’ 87’ 75’
176’
P/N: 45G90R220
225’ 185’ 145’ 105’ 65’ 35’
230’ TOWER 19.1 OR 15.8 10.6 291’ 261’ 234’
3/16” EHS (399#)
212’ 85’ 65’ 55’
184’
P/N: 45G90R230
52
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
45G
45AG2
BPC45G
18
1
1
3/16EHS
BG2142
3050’
30
FDNS GA45GD BASE ANCHOR CB1G AB2
5
30
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
BPC45G
APL45G
20
1
1
1
FDNS GA45GD BASE ANCHOR 5
AB2
CB1G
200’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G90R 200
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 2375’
24
800’
6
24
6
15
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
APL45G
BPC45G
21
1
1
3/16EHS
BG2142
2900’
30
3
5
30
6
2
3
45G
BPC45G
APL45G
22
1
1
15
5
6
2
3
45G
APL45G
BPC45G
23
1
1
3/16EHS
BG2142
3675’
36
6
2
AB2
24
6 3/4x12PP 1
AB2
220’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G90R 220
3/8THH 1/2TBE&J 6
15
3/4x12PP TBSAFETY 1
6
INNER OUTER GA45GD BASE ANCHOR ANCHOR
6
18
BGK3GGX CPC.5/.75 3
CB2G AB1
6
5/16THH 1/2TBE&J 36
210’ ROHN 45G Al l par ts shown i n tabl e a re i n cl uded when order i ng Par t No: 45G90R 210
INNER OUTER GA45GD BASE ANCHOR ANCHOR
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GAC3455TOP AGK1GGX
CB2G AB2
6
6
24
875’
3
5/16THH 1/2TBE&J TBSAFETY
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
2100’
1
INNER OUTER GA45GD BASE ANCHOR ANCHOR
ANCHORS & GROUNDING INCLUDED
ANCHORS & GROUNDING INCLUDED
3/4x12PP
3
3/16EHS 1/4EHS BG2142 BG2144 5/16THH
GUYS & CONNECTIONS INCLUDED
Al l p ar ts shown i n tabl e a re i n c l uded when order i ng Par t No: 45G90R 190
3
15
GUYS & CONNECTIONS INCLUDED
TOWER PARTS INCLUDED
190’ ROHN 45G
5/16THH 1/2TBE&J TBSAFETY
6
CB2G AB1
AB2
TBSAFETY 6 3/4x12PP
230’ ROHN 45G Al l par ts shown i n tabl e a re i n cl ud ed when ord er i ng Par t No: 45G90R 230
1
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D D E S I G N - 4 5 G 9 0 M P H R E V. G , 7 0 M P H R E V. F 225’ 185’ 145’
240’ TOWER 18.9 OR 15.7 10.4 296’ 267’ 241’
105’
219’
65’ 35’
1/4” EHS (665#) 3/16” EHS (399#)
85’ 65’ 55’
192’
P/N: 45G90R240 250’ TOWER 18.6 OR 15.6
245’
10.4
205’
316’ 286’
165’
259’
125’
236’
85’
1/4” EHS (665#) 3/16” EHS (399#)
113’ 87’
45’
75’
200’
P/N: 45G90R250 260’ TOWER 18.4 OR 15.5
245’
10.2
205’
321’ 292’
165’
265’
125’
243’
85’
1/4” EHS (665#) 3/16” EHS (399#)
113’ 87’
45’
75’
208’
P/N: 45G90R260 270’ TOWER 18.2 OR 15.4
265’
10.0
225’
342’ 312’
185’
284’
145’
260’
105’ 65’ 35’
138’ 111’ 97’
1/4” EHS (665#) 3/16” EHS (399#)
90’
216’
P/N: 45G90R270
265’ 225’ 185’ 145’ 105’ 65’ 35’
280’ TOWER 18.0 OR 15.2 9.8 347’ 317’ 291’ 267’ 138’ 111’ 97’
1/4” EHS (665#) 3/16” EHS (399#)
90’
224’
P/N: 45G90R280
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
45G
BPC45G
APL45G
24
1
1
INNER OUTER GA45GD BASE ANCHOR ANCHOR
6
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 2800’
6
30
950’
30
CB2G AB1
AB2
3/8THH
1/2TBE&J
6
18
240’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G90R 240
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 6
2
3
45G
BPC45G
APL45G
25
1
1
6
INNER OUTER GA45GD BASE ANCHOR ANCHOR
6
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3125’
30
1025’
6
6
1
30
CB2G AB1
AB2
3/8THH
1/2TBE&J
6
18
250’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G90R 250
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 6
2
3
45G
BPC45G
APL45G
26
1
1
6
INNER OUTER GA45GD BASE ANCHOR ANCHOR
6
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3200’
30
1025’
6
6
1
30
CB3G AB2
AB2
3/8THH
1/2TBE&J
6
18
260’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G90R 260
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 6
2
3
45G
BPC45G
APL45G
27
1
1
6
INNER OUTER GA45GD BASE ANCHOR ANCHOR
7
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3825’
36
1100’
6
6
1
36
CB3G AB2
AB2
3/8THH
1/2TBE&J
6
21
270’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G90R 270
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 6
2
3
45G
BPC45G
APL45G
28
1
1
6
INNER OUTER GA45GD BASE ANCHOR ANCHOR
7
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3900’
36
1125’
6
6
1
36
CB3G AB2
AB2
3/8THH
1/2TBE&J
6
21
280’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G90R 280
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 6
2
3
6
1
6
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
53
G
GUYED TOWERS - 45G
S TA N D A R D D E S I G N - 4 5 G 9 0 M P H R E V. G , 7 0 M P H R E V. F 285’ 245’ 205’ 165’ 125’ 85’ 45’
290’ TOWER 17.8 OR 15.1 9.6 367’ 337’ 310’ 285’
1/4” EHS (665#) 3/16” EHS (399#)
163’ 135’ 114’
105’
232’
P/N: 45G90R290
285’ 245’ 205’ 165’ 125’ 85’ 45’
300’ TOWER 17.6 OR 15.0 9.6 373’ 343’ 316’ 291’
1/4” EHS (665#) 3/16” EHS (399#)
163’ 135’ 114’
105’
240’
P/N: 45G90R300
54
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
45G
BPC45G
APL45G
29
1
1
INNER OUTER GA45GD BASE ANCHOR ANCHOR
7
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 4275’
36
1175’
6
36
CB3G AB2
AB2
3/8THH
1/2TBE&J
6
21
290’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G90R 290
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 6
2
3
45G
BPC45G
APL45G
30
1
1
6
INNER OUTER GA45GD BASE ANCHOR ANCHOR
7
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 4350’
36
1200’
6
6
1
36
CB3G AB2
AB2
3/8THH
1/2TBE&J
6
21
300’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G90R 300
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 6
2
3
6
1
6
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D D E S I G N - 4 5 G 1 1 0 M P H R E V. G , 9 0 M P H R E V. F 31’
40’ TOWER 21.3 OR 15.5 21.6 45’ 1/4” EHS (665#)
32’
P/N: 45G110R040
41’
50’ TOWER 19.9 OR 14.7 20.2 57’ 1/4” EHS (665#)
40’
P/N: 45G110R050
51’ 25’
60’ TOWER 18.9 OR 14.1 19.0 70’ 54’
1/4” EHS (665#) 3/16” EHS (399#)
48’
P/N: 45G110R060
61’ 29’
70’ TOWER 18.0 OR 13.7 18.2 83’ 63’
1/4” EHS (665#) 3/16” EHS (399#)
56’
P/N: 45G110R070
71’ 35’
80’ TOWER 17.4 OR 13.4 17.4 96’ 73’
1/4” EHS (665#) 3/16” EHS (399#)
64’
P/N: 45G110R080
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
GA45GD BASEFDNS ANCHOR
45G
45AG2
BPC45G
3
1
1
1
1/4EHS
BG2144
3/8THH
1/2TBE&J
TBSAFETY
150’
6
6
3
3
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 1
3
45G
45AG2
BPC45G
4
1
1
1
1/4EHS
BG2144
3/8THH
1/2TBE&J
TBSAFETY
200’
6
6
3
3
1
3
GA45GD BASEFDNS ANCHOR
3
45G
45AG2
BPC45G
5
1
1
50’ ROHN 45G
CB1G AB2
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 1
Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 040
3/4x12PP
3
3
40’ ROHN 45G
CB1G AB2
Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 050
3/4x12PP 1
3
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
60’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 060
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 175’
6
225’
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
6
1
1
6 3/4x12PP TBSAFETY 1
3
3
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
70’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 070
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 225’
6
275’
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
7
1
1
6 3/4x12PP TBSAFETY 1
3
3
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
80’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 080
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 250’
6
325’
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
3
6 3/4x12PP TBSAFETY 1
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
3
55
G
GUYED TOWERS - 45G
S TA N D A R D D E S I G N - 4 5 G 1 1 0 M P H R E V. G , 9 0 M P H R E V. F 81’ 39’
90’ TOWER 16.8 OR 13.0 16.8 108’ 82’
1/4” EHS (665#) 3/16” EHS (399#)
72’
P/N: 45G110R090
91’ 61’
100’ TOWER 16.3 OR 12.7 16.2 121’ 101’
31’
86’
1/4” EHS (665#) 3/16” EHS (399#)
80’
P/N: 45G110R100
101’ 67’
110’ TOWER 15.8 OR 12.5 15.6 134’ 111’
34’
94’
1/4” EHS (665#) 3/16” EHS (399#)
88’
P/N: 45G110R110
111’ 75’
120’ TOWER 15.4 OR 12.2 15.2 147’ 122’
35’
102’
1/4” EHS (665#) 3/16” EHS (399#)
96’
P/N: 45G110R120
121’ 78’
130’ TOWER 15.1 OR 12.0 14.8 160’ 130’
35’
110’
1/4” EHS (665#) 3/16” EHS (399#)
104’
P/N: 45G110R130
56
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
45G
45AG2
BPC45G
8
1
1
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
90’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 090
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 275’
6
350’
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
9
1
1
6 3/4x12PP TBSAFETY 1
3
3
GA45GD BASEFDNS ANCHOR 3
CB1G AB2
100’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 100
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 600’
12
400’
6
12
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
10
1
1
9 3/4x12PP TBSAFETY 1
3
3
GA45GD BASEFDNS ANCHOR 3
CB1G AB2
110’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 110
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 675’
12
450’
6
12
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
11
1
1
9 3/4x12PP TBSAFETY 1
3
3
GA45GD BASEFDNS ANCHOR 3
CB1G AB2
120’ ROHN 45G
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 725’
12
475’
6
12
6
9
Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 120
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
12
1
1
3
1
3
GA45GD BASEFDNS ANCHOR 3
CB1G AB2
130’ ROHN 45G
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 775’
12
525’
6
12
6
9
Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 130
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
3
1
3
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D D E S I G N - 4 5 G 1 1 0 M P H R E V. G , 9 0 M P H R E V. F 131’ 98’
140’ TOWER 14.8 OR 11.8 14.4 172’ 149’
65’ 32’
129’
1/4” EHS (665#) 3/16” EHS (399#)
116’ 112’
P/N: 45G110R140
141’ 106’
150’ TOWER 14.5 OR 11.7 14.0 185’ 160’
72’ 35’
140’
1/4” EHS (665#) 3/16” EHS (399#)
125’ 120’
P/N: 45G110R150
151’ 113’
160’ TOWER 14.2 OR 11.5 13.8 198’ 171’
76’ 38’
149’
1/4” EHS (665#) 3/16” EHS (399#)
134’ 128’
P/N: 45G110R160
161’ 128’
170’ TOWER 14.0 OR 11.4 13.6 211’
96’
187’ 166’
64’
150’
32’
140’
1/4” EHS (605#) 3/16” EHS (399#)
136’
P/N: 45G110R170
172’ 135’
180’ TOWER 13.8 OR 11.2 13.2 224’
99’
197’ 175’
66’
158’
33’
148’
5/16” EHS (1,120#) 3/16” EHS (399#)
144’
P/N: 45G110R180
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
45G
45AG2
BPC45G
13
1
1
GA45GD BASEFDNS ANCHOR 4
CB1G AB2
140’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 140
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 1275’
18
550’
6
18
6
12
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
14
1
1
3
1
3
GA45GD BASEFDNS ANCHOR 4
CB1G AB2
150’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 150
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 1375’
18
600’
6
18
6
12
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
15
1
1
3
1
3
GA45GD BASEFDNS ANCHOR 4
CB2G AB2
160’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 160
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 1450’
18
650’
6
18
6
12
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
16
1
1
3
1
3
GA45GD BASEFDNS ANCHOR 5
170’ ROHN 45G
CB2G AB3
Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 170
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 5/8TBE&J 2050’
6
24
675’
24
6
GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
15
3/4x12PP TBSAFETY
3
3
1
3
45G
45GL2*
BPC45G
17
1
1
3
1
GA45GD APL45G BASEFDNS ANCHOR 5
CB2G AB3
1
Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 180
3/16EHS 142265 BG2142 BG2146 5/16THH 7/16THH 5/8TBE&J 2175’
6
24
725’
24
GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25 3
1
3
3
15
6
180’ ROHN 45G
3/4x12PP TBSAFETY 1
3
* 45GL2 Lug section required for 5/16” guy Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
57
G
GUYED TOWERS - 45G
S TA N D A R D D E S I G N - 4 5 G 1 1 0 M P H R E V. G , 9 0 M P H R E V. F 182’ 145’ 109’
190’ TOWER 13.6 OR 11.1 13.0 237’ 210’ 187’
73’
169’
36’
156’
5/16” EHS (1,120#) 3/16” EHS (399#)
152’
P/N: 45G110R190
192’
200’ TOWER 13.4 OR 11.0 10.6 250’
155’ 115’
223’ 197’
75’
177’
35’
164’
5/16” EHS (1,120#) 3/16” EHS (399#)
160’
P/N: 45G110R200
202’ 167’ 133’ 99’ 65’ 33’
210’ TOWER 13.2 OR 10.9 10.4 263’ 237’ 5/16” EHS (1,120#) 214’ 3/16” EHS (399#) 195’ 85’ 64’ 55’
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
GUYS & CONNECTIONS INCLUDED
45G
45GL2*
BPC45G
18
1
1
2300’
212’ 175’ 139’ 105’ 69’ 35’
10.2 276’ 248’ 5/16” EHS (1,120#) 224’ 3/16” EHS (399#) 205’ 1/4” EHS (665#) 91’ 69’ 60’
TOWER PARTS INCLUDED
GUYS & CONNECTIONS INCLUDED
176’
P/N: 45G110R220
ANCHORS & GROUNDING INCLUDED
CB2G AB3
1
6
24
725’
24
3/4x12PP TBSAFETY
3
3
1
3
45G
45GL2*
BPC45G
19
1
1
3
1
GA45GD APL45G BASEFDNS ANCHOR 5
CB2G AB3
1
6
24
800’
24
GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25 3
45G
1
3
3
15
6
3/4x12PP TBSAFETY 1
3
INNER OUTER BPC45G 45GL2* APL45G GA45GD BASE ANCHOR ANCHOR
20
1
1
1
6
CB3G AB2
3/16EHS
142265
BG2142
BG2146
5/16THH
2550’
850’
30
6
30
7/16THH
1/2TBE&J
6
6
5/8TBE&J TBSAFETY 12
3
3
210’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 210
1
6
CPC1/1.25
3
3
2
AB3
3/4x12PP
GAC5655TOP GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
45G
3
INNER OUTER BPC45G 45GL2* APL45G GA45GD BASE ANCHOR ANCHOR
21
1
1
1
6
CB3G AB2
AB3
3/16EHS
1/4EHS
142265
BG2142
BG2144
BG2146
1875’
800’
900’
24
6
6
5/16THH
3/8THH
7/16THH
1/2TBE&J
24
6
6
6
5/8TBE&J TBSAFETY 12
GAC5655TOP GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
200’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 200
3/16EHS 142265 BG2142 BG2146 5/16THH 7/16THH 5/8TBE&J 2425’
190’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 190
15
6
GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
P/N: 45G110R210
220’ TOWER 13.0 OR 10.8
5
3/16EHS 142265 BG2142 BG2146 5/16THH 7/16THH 5/8TBE&J
168’
ANCHORS & GROUNDING INCLUDED
GA45GD APL45G BASEFDNS ANCHOR
3
2
3
3
220’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 220
6 CPC1/1.25 3/4X12PP 3
1
* 45GL2 Lug section required for 5/16” guy
58
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D D E S I G N - 4 5 G 1 1 0 M P H R E V. G , 9 0 M P H R E V. F 222’ 185’ 155’ 125’ 95’ 65’ 33’
230’ TOWER 12.8 OR 10.7 10.0 288’ 261’ 5/16” EHS (1,120#) 241’ 3/16” EHS (399#) 222’ 1/4” EHS 124’ (665#) 103’ 87’ 80’
TOWER PARTS INCLUDED
GUYS & CONNECTIONS INCLUDED
45G BPC45G APL45G GA45GD 22
195’ 159’ 125’ 95’ 65’ 35’
240’ TOWER 12.7 OR 10.6 10.0 301’ 274’ 5/16” EHS (1,120#) 249’ 3/16” EHS (399#) 229’ 1/4” EHS 124’ (665#) 103’ 87’ 80’
TOWER PARTS INCLUDED
GUYS & CONNECTIONS INCLUDED
192’
P/N: 45G110R240
ANCHORS & GROUNDING INCLUDED
7
1
CB3G AB2
AB3
1/4EHS
142265
BG2142
BG2144
BG2146
2475’
850’
925’
30
6
6
5/16THH
3/8THH
7/16THH
30
6
6
P/N: 45G110R230
232’
1
INNER OUTER BASE ANCHOR ANCHOR
3/16EHS
184’
ANCHORS & GROUNDING INCLUDED
1
45GL2*
1/2TBE&J 5/8TBE&J TBSAFETY 9
12
3
2
45G BPC45G APL45G GA45GD 23
1
1
3 45GL2*
7
1
3
3
CB3G AB2
142265
BG2142
BG2144
BG2146
2525’
875’
975’
30
6
6
5/16THH
3/8THH
7/16THH
30
6
6
1/2TBE&J 5/8TBE&J TBSAFETY 12
2
3
3
240’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G110R 240
6
GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX CPC.5/.75 CPC1/1.25 3
1
AB3
1/4EHS
3
3/4x12PP
INNER OUTER BASE ANCHOR ANCHOR
3/16EHS
9
Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G110R 230
6
GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX CPC.5/.75 CPC1/1.25 3
230’ ROHN 45G
3
3/4x12PP 1
* 45GL2 Lug section required for 5/16” guy
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
59
G
GUYED TOWERS - 45G
S TA N D A R D D E S I G N - 4 5 G 1 3 0 M P H R E V. G , 1 1 0 M P H R E V. F 40’ TOWER 15.3 OR 11.1
35’
TOWER PARTS INCLUDED
13.0 47’ 1/4” EHS (665#)
GUYS & CONNECTIONS INCLUDED
32’
P/N: 45G130R040 50’ TOWER 14.3 OR 10.6
45’
TOWER PARTS INCLUDED
12.0 60’ 1/4” EHS (665#)
GUYS & CONNECTIONS INCLUDED
40’
P/N: 45G130R050
55’
60’ TOWER 13.6 OR 10.2 11.6
54’
1/4” EHS (665#) 3/16” EHS (399#)
48’
P/N: 45G130R060
65’
70’ TOWER 13.0 OR 9.9 11.0
63’
1/4” EHS (665#) 3/16” EHS (399#)
56’
P/N: 45G130R070
75’
80’ TOWER 12.5 OR 9.6 10.6
73’
1/4” EHS (665#) 3/16” EHS (399#)
64’
P/N: 45G130R080
60
ANCHORS & GROUNDING INCLUDED
GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
99’ 35’
GUYS & CONNECTIONS INCLUDED
TOWER PARTS INCLUDED
86’ 29’
ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
73’ 25’
ANCHORS & GROUNDING INCLUDED
GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
45G
45AG2
BPC45G
3
1
1
1/4EHS
BG2144
3/8THH
150’
6
6
GA45GD BASEFDNS ANCHOR 1
1
3
45G
45AG2
BPC45G
4
1
1
1/4EHS
BG2144
3/8THH
200’
6
6
3
3 3/4x12PP 1
3
GA45GD BASEFDNS ANCHOR 1
1
3
45G
45AG2
BPC45G
5
1
1
50’ ROHN 45G
CB1G AB2
Al l par ts shown i n ta b l e are i nc l uded w hen order i ng Pa r t No: 45G130R 050
1/2TBE&J TBSAFETY 3
3
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
Al l par ts shown i n ta b l e are i nc l uded w hen order i ng Pa r t No: 45G130R 040
1/2TBE&J TBSAFETY
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
40’ ROHN 45G
CB1G AB2
3/4x12PP 1
3
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
60’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G130R 060
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 175’
6
250’
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
6
1
1
6 3/4x12PP
TBSAFETY
1
3
3
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
70’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G130R 070
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 225’
6
275’
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
45G
45AG2
BPC45G
7
1
1
3
6 3/4x12PP
TBSAFETY
1
3
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
80’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G130R 080
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 250’
6
325’
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3
1
3
3
6 3/4x12PP
TBSAFETY
1
3
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D D E S I G N - 4 5 G 1 3 0 M P H R E V. G , 1 1 0 M P H R E V. F 85’
90’ TOWER 12.1 OR 9.4
TOWER PARTS INCLUDED
10.0 111’
39’ 82’
1/4” EHS (665#) 3/16” EHS (399#)
72’
P/N: 45G130R090
95’
100’ TOWER 11.7 OR 9.2 9.6
31’
101’
1/4” EHS (665#) 3/16” EHS (399#)
86’
80’
P/N: 45G130R100
105’
110’ TOWER 11.4 OR 9.0 9.0
34’
111’
1/4” EHS (665#) 3/16” EHS (399#)
94’
88’
P/N: 45G130R110
115’
120’ TOWER 11.1 OR 8.8 8.6
35’
122’
5/16”EHS (1,120#) 3/16” EHS (399#)
102’
96’
P/N: 45G130R120
125’
130’ TOWER 10.9 OR 8.6 8.2 163’
78’ 35’
130’ 110’
ANCHORS & GROUNDING INCLUDED
GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
150’ 75’
GUYS & CONNECTIONS INCLUDED
TOWER PARTS INCLUDED
137’ 67’
ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
124’ 61’
GUYS & CONNECTIONS INCLUDED
GUYS & CONNECTIONS INCLUDED ANCHORS & GROUNDING INCLUDED
TOWER PARTS INCLUDED
5/16”EHS (1,120#) 3/16” EHS (399#) 1/4”EHS (665#)
GUYS & CONNECTIONS INCLUDED
104’
P/N: 45G130R130
ANCHORS & GROUNDING INCLUDED
45G
45AG2
BPC45G
8
1
1
GA45GD BASEFDNS ANCHOR 2
CB1G AB2
90’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G130R 090
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 275’
6
375’
6
6
6
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
9
1
1
1
3
3
GA45GD BASEFDNS ANCHOR 3
CB1G AB2
100’ ROHN 45G Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G130R 100
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 600’
12
400’
6
12
6
9
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
1
3
45G
45AG2
BPC45G
10
1
1
3
1
3
GA45GD BASEFDNS ANCHOR 3
CB1G AB2
110’ ROHN 45G Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G130R 110
3/16EHS 1/4EHS BG2142 BG2144 5/16THH 3/8THH 1/2TBE&J 675’
12
450’
6
12
6
9
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 3/4x12PP TBSAFETY 3
3
1
3
3
1
45G
45GL5*
BPC45G
GA45GD
APL45G
11
1
1
3
1
FDNS
BASE ANCHOR
CB1G AB2
120’ ROHN 45G Al l par ts shown i n
3/16EHS 142265 BG2142 BG2146 5/16THH 7/16THH 1/2TBE&J 5/8TBE&J tabl e are i nc l ud ed 725’
12
500’
6
12
6
GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
6
3
3/4x12PP
TBSAFETY
1
3
when ord er i ng Par t No: 45G130R 120
3
1
3
3
45G
45GL5*
BPC45G
GA45GD
12
1
1
3
3/16EHS
1/4EHS
142265
BG2142
BG2144
BG2146
130’ ROHN 45G
350’
425’
525’
6
6
6
5/16THH
3/8THH
7/16THH
Al l par ts shown i n tabl e are i nc l ud ed when ord er i ng Par t No: 45G130R 130
6
6
6
APL45G BASEFDNS ANCHOR 1
CB2G AB3
5/8TBE&J TBSAFETY 9
3
GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25 3/4x12PP 3
1
3
3
1
* 45GL5 Lug section required for 5/16” guy Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
61
G
GUYED TOWERS - 45G
S TA N D A R D D E S I G N - 4 5 G 1 3 0 M P H R E V. G , 1 1 0 M P H R E V. F 135’ 98’ 65’ 32’
140’ TOWER 10.6 OR 8.5 7.8 175’
5/16” EHS 149’ (1,120#) 1/4” EHS (665#) 129’ 3/16” EHS (399#) 116’
TOWER PARTS INCLUDED
GUYS & CONNECTIONS INCLUDED
112’
P/N: 45G130R140
ANCHORS & GROUNDING INCLUDED
145’ 106’ 72’ 35’
150’ TOWER 10.4 OR 8.4 7.4 188’
5/16” EHS 160’ (1,120#) 1/4” EHS (665#) 140’ 3/16” EHS (399#) 125’
TOWER PARTS INCLUDED
GUYS & CONNECTIONS INCLUDED
120’
P/N: 45G130R150
ANCHORS & GROUNDING INCLUDED
FDNS
45G
45GL5*
BPC45G
GA45GD
APL45G
13
1
1
4
1
3/16EHS
1/4EHS
142265
BG2142
BG2144
BG2146
140’ ROHN 45G
800’
475’
575’
12
6
6
5/16THH
3/8THH
7/16THH
Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G130R 140
12
6
6
BASE ANCHOR
CB2G AB3
5/8TBE&J TBSAFETY 12
3
GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25 3/4x12PP 3
1
3
3
1
45G
45GL5*
BPC45G
GA45GD
APL45G
14
1
1
4
1
3/16EHS
1/4EHS
142265
BG2142
BG2144
BG2146
150’ ROHN 45G
850’
525’
600’
12
6
6
5/16THH
3/8THH
7/16THH
Al l par ts shown i n tabl e are i nc l uded when order i ng Par t No: 45G130R 150
12
6
6
5/8TBE&J TBSAFETY 12
FDNS
BASE ANCHOR
CB2G AB3
3
GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25 3/4x12PP 3
1
3
3
1
* 45GL5 Lug section required for 5/16” guy
62
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
G
GUYED TOWERS - 45G
PA R T S & A CC E S S O R I E S 2.38” O.D. 2.07“ I.D.
1’ - 6” 1’ - 0”
2.00“ O.D. 1.87” I.D.
1.66“ O.D. 1.38” I.D. 1.25” N.P.T.
1’ - 0”
9’ - 0” 2’ - 0”
Set Screw
2’ - 0”
TOP SECTION 45AG
2.25” O.D. 2.08“ I.D.
2’ - 0” 9’ - 0”
Set Screw
9’ - 6” 2’ - 0”
9’ - 0”
1’ - 0”
TOP SECTION 45AG2
TOP SECTION 45AG1
TOP SECTION 45AG3
Set Screw
1’ - 8” 1’ - 1” 8’ - 1“
7’ - 8”
8”
2.75” O.D. 2.58“ I.D.
1’-3 3/4”
BEARING PLATE BPL45G
TOP SECTION 45AG5
TOP SECTION 45AG4 TOP PLATE HOLE PATTERN IS THE SAME AS BPL45G.
TOP PLATE APL45G
CONVERTS STANDARD SECTION TO A TOP SECTION. HOLE PATTERN FITS TB3 (2” O.D.) AND TB4 (3” O.D.) THRUST BEARINGS.
FOR MOUNTING BEACON OR LIGHTNING ROD.
ACCESSORY SHELF AS455G
LIGHTNING ROD LRCL
TOP MOUNT 45TDMKD - NO MAST 45TDM2S3KD - 2 3/8” O.D. MAST 45TDM25S3KD - 2 7/8” O.D. MAST 45TDM3S3KD - 3 1/2” O.D. MAST 45TDM35S3KD - 4” O.D. MAST 45TDM4S3KD - 4 1/2” O.D. MAST MOUNTING TUBE PROVIDED IS 7’ LONG.
FOR MOUNTING MANY POPULAR ROTORS. FIELD DRILLING MAY BE NECESSARY FOR SOME ROTORS.
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
5’ COPPER CLAD MOUNTS TO APL45G.
63
G
GUYED TOWERS - 45G
PA R T S & A CC E S S O R I E S
5/8” x 12”
CONCRETE BASE PLATE BPC45G* FOR USE WITH 3/4X12PP PIER PIN EMBEDDED IN CONCRETE. CONCRETE BASE PLATE IS TO BE USED FOR BRACKETED AND GUYED APPLICATIONS ONLY.
HINGED BASE PLATE BPH45G*
PIER PIN 3/4X12PP FOR USE WITH BPC45G EMBEDDED IN CONCRETE. PIER PIN MUST BE ORDERED SEPARATELY, UNLESS BEING PURCHASED AS PART OF A COMPLETE TOWER KIT.
FOR USE WITH 5/8X12BB BASE BOLTS (ORDERED SEPARATELY). HINGED TO ALLOW TOWER TO BE ROTATED UP FROM BASE DURING INSTALLATION.
BASE BOLT 5/8X12BB FOR USE WITH BPH45G (6) REQUIRED, ORDERED SEPARATELY.
HINGED BASE PLATE IS TO BE USED FOR BRACKETED AND GUYED APPLICATIONS ONLY.
Adjustable 2.5’ - 3.0’
TAPERED BASE 45TG*
5’ SHORT BASE SB45G
CAN BE USED WITH A4197L BASE INSULATOR OR WITH 3/4X12PP, ORDERED SEPARATELY.
FOR EMBEDMENT IN CONCRETE.
FLAT ROOF MOUNT FR45G*
SIDE ARM BRACKET SA253UA
BOLTS DIRECTLY TO FLAT ROOF SURFACE.
MOUNTING TUBE PROVIDED IS 3’ LONG, 2 - 1/4” O.D.
HEAVY DUTY UNIVERSAL HOUSE BRACKET HBUTVRO
DISH MOUNT VY4311A2 - 2 3/8” O.D. VY4311A - 4 1/2” O.D. MAST TUBE PROVIDED IS 5’ LONG.
FACE MOUNT DM45G2 - 2 3/8” O.D. 5’ LONG DM454 - 4 1/2” O.D. 5’ LONG
ADJUSTABLE TO POSITION TOWER 18” - 36” FROM WALL.
TORQUE ARM STABILIZER ASSEMBLY TA45 ANTI-TWIST DEVICE LOCATED IN THE AREA OF ANTENNAS. PROVIDES SIX-WAY GUYING. BOLTS TO TOWER AT ANY SECTION JOINT. ATTACHED WITH JOINT BOLTS. MUST BE INSTALLED AS SECTIONS ARE JOINED TOGETHER.
* TOWERS MOUNTED ON THESE BASES MUST BE BRACKETED OR GUYED AT ALL TIMES. TEMPORARY STEEL GUYING MAY ALSO BE NECESSARY DURING INSTALLATION AND DISMANTLING.
64
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
PA R T S & A CC E S S O R I E S
TORQUE BAR TB45D
OPTIONAL, FOR USE WITH GA45GD. REQUIRES (1) 3/8” SHACKLE FOR EACH BAR.
GUY BRACKET GA45GD MOUNTS TO TOWER AT ANY HORIZONTAL BRACE.
TB3 - SUPPORTS UP TO 2” O.D. MAST. TB4 - SUPPORTS UP TO 3” O.D. MAST.
TOWER BUSHING TB50 - 1-1/4” I.D. X 2” O.D. TB75 - 1-1/2” I.D. X 2” O.D.
MOUNTS TO BPL45G AND 45AG4.
FOR USE ON 45AG TOP SECTION
THRUST BEARING
WARNING WARNING WARNING THIS ITEM IS NOT INTENDED FOR THE LIFTING OF PERSONNEL See safety precaution literature
ANTI-CLIMB PANELS VW913A THREE ANTI-CLIMB PANELS BOLT TO STANDARD TOWER SECTION.
WORK PLATFORM WP45G
SAFETY RING SR245
SNAPS INTO PLACE AT ANY LEVEL. NO BOLTS REQUIRED.
SNAPS INTO PLACE AT ANY LEVEL. NO BOLTS REQUIRED.
ERECTION FIXTURE EF2545 - 2 1/2” SHEAVE WITH 3/8“ I.D. GROOVE. NOTE: ERECTION FIXTURES ARE FOR LIFTING ONE 10’ SECTION AT A TIME AND ARE NOT INTENDED FOR THE LIFTING OF PERSONNEL.
SAFETY CABLE SYSTEM ORDERING INFORMATION
CLIMBING HARNESS TTFBH-4D JOURNEYMAN HARNESS
TTFBH-C/P
PROFESSIONAL HARNESS
SAFETY CABLE SLIDER WITH CARABINEER TT-WG-500-W/SMC
TOWER HEIGHT 50’ 100’ 150’ 200’ 250’ 300’ 350’
PART NUMBER TT0504555 TT1004555 TT1504555 TT2004555 TT2504555 TT3004555 TT3504555
SAFETY CABLE SLIDER AND CLIMBING HARNESS MUST BE ORDERED SEPARATELY.
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
65
G
GUYED TOWERS - 45G
A N C H O R I N F O R M AT I O N 81”
12” 3/8” CL of hole to edge of plate = 1”
P/N STAMPED HERE
3/4” 4” x 4” x 3/8” angle
2” 11/16”
GAC3455TOP
120”
12” 1/2” CL of hole to edge of plate = 1 1/4”
P/N STAMPED HERE
1 1/4” 5” x 5” x 3/8” angle
2 1/2” 13/16”
GAC5655TOP
REV G BASE GROUNDING BGK3GGX
REV G ANCHOR GROUNDING AGK1GGX
Attach to leg with supplied leg clamp
Ground Wire Clamp
Ground Wire
Ground Rod Clamp 6” Min. Ground Rod
Ground Rod Clamp
6” Min.
Ground Rod, 3 provided (to be installed at 120o separation at 20’ spacing.
66
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D A N C H O R B LO C K S
Anchor rod
Ground Line
All around stirrups equally spaced 12” O.C. anchored with 90 hooks around a horizontal bar Additional bar at center-line each side, when required
o
Top and bottom horizontal bars equally spaced
A B
C
D
Refer to page 68 for anchor rod installation angles.
Block
Anchor Dimensions (in.) B A D C
AB2
4’ - 0” 1‘ - 6” 4‘ - 0“ 6’ - 0”
AB3
6’ - 0” 1’ - 6” 3’ - 0” 6’ - 0”
AB4
6‘ - 0” 1’ - 6” 4‘ - 0“ 9’ - 0”
AB5
8’ - 0” 2’ - 0” 3’ - 0” 10’ - 0”
AB6
8’ - 0” 2’ - 0” 4’ - 0” 10’ - 0”
Horizontal Bars (Qty. & Size) (5) #6 Bars, Top Layer (5) #6 Bars, Bottom Layer (0) Additional Bar, Each Side (4) #6 Bars, Top Layer (4) #6 Bars, Bottom Layer (0) Additional Bar, Each Side (5) #6 Bars, Top Layer (5) #6 Bars, Bottom Layer (0) Additional Bar, Each Side (4) #7 Bars, Top Layer (4) #7 Bars, Bottom Layer (1) Additional Bar, Each Side (5) #7 Bars, Top Layer (5) #7 Bars, Bottom Layer (1) Additional Bar, Each Side
Stirrup Size Concrete Vol. & Spacing (Cu. Yds.) #3 @ 12” O.C. 1.33 Per Block 4.0 Total for 3 #3 @ 12” O.C. 1.0 Per Block 3.0 Total for 3 #4 @ 12” O.C. 2.0 Per Block 6.0 Total for 3 #4 @ 12” O.C. 2.22 Per Block 6.7 Total for 3 #4 @ 12” O.C. 2.96 Per Block 8.9 Total for 3
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
67
G
GUYED TOWERS - 45G
A N C H O R R O D I N S TA L L AT I O N A N G L E S
120
Rod Angle (in degrees)
o
Tower Plan
Anchor Rod Angle
45G | 90MPH Tower Height 40’ 50’ 60’ 70’ 80’ 90’ 100’ 110’ 120’ 130’ 140’ 150’ 160’ 170’ 180’ 190’ 200’ 210’ 220’ 230’ 240’ 250’ 260’ 270’ 280’ 290’ 300’
68
Inner Outer Rod Outer Inner Rod Rod Rod Number Angle Number Angle GAC3455TOP 45 GAC3455TOP 46 GAC3455TOP 43 GAC3455TOP 43 GAC3455TOP 41 GAC3455TOP 42 GAC3455TOP 42 GAC3455TOP 40 GAC3455TOP 39 GAC3455TOP 40 GAC3455TOP 39 GAC3455TOP 38 GAC3455TOP 37 GAC3455TOP 38 GAC3455TOP 38 GAC3455TOP 36 GAC3455TOP 36 GAC3455TOP 40 GAC3455TOP 44 GAC3455TOP 40 GAC3455TOP 44 GAC3455TOP 42 GAC3455TOP 42 GAC3455TOP 42 GAC3455TOP 41 GAC3455TOP 40 GAC3455TOP 43 GAC3455TOP 40 GAC3455TOP 42 GAC3455TOP 38 GAC3455TOP 43 GAC3455TOP 38 GAC3455TOP 43 GAC3455TOP 38 GAC3455TOP 44 GAC3455TOP 38 GAC3455TOP 43
Ground Line
45G | 110MPH Tower Height 40’ 50’ 60’ 70’ 80’ 90’ 100’ 110’ 120’ 130’ 140’ 150’ 160’ 170’ 180’ 190’ 200’ 210’ 220’ 230’ 240’
Inner Outer Rod Outer Inner Rod Rod Rod Number Angle Number Angle GAC3455TOP 45 GAC3455TOP 46 GAC3455TOP 41 GAC3455TOP 41 GAC3455TOP 41 GAC3455TOP 41 GAC3455TOP 39 GAC3455TOP 39 GAC3455TOP 39 GAC3455TOP 38 GAC3455TOP 38 GAC3455TOP 38 GAC3455TOP 38 GAC5655TOP 37 GAC5655TOP 37 GAC5655TOP 37 GAC5655TOP 37 GAC3455TOP 41 GAC5655TOP 42 GAC3455TOP 41 GAC5655TOP 42 GAC3455TOP 38 GAC5655TOP 43 GAC3455TOP 39 GAC5655TOP 43
45G | 130MPH Tower Height 40’ 50’ 60’ 70’ 80’ 90’ 100’ 110’ 120’ 130’ 140’ 150’
Rod Rod Number Angle GAC3455TOP 48 GAC3455TOP 48 GAC3455TOP 40 GAC3455TOP 40 GAC3455TOP 40 GAC3455TOP 40 GAC3455TOP 38 GAC3455TOP 38 GAC3455TOP 38 GAC5655TOP 38 GAC5655TOP 37 GAC5655TOP 37
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
GUYED TOWERS - 45G
G
S TA N D A R D B A S E P I E R S Pier Pin 4” Projection Grade
6”
(2) No. 4 Circular ties, 2-1/2” O.C. with 2“ cover with 24” laps
No. 4 Circular ties, 3” Max. O.C. with 24” laps
B
Vertical bars equally spaced
ELEVATION VIEW
A
Alternate Square Pier
No. 4 Circular ties, 3” O.C. with 24” laps
CL
A
Vertical bars equally spaced
CL
PLAN VIEW
Base
A
B
Concrete Vol. Vertical Bars (Cu. Yds.) (No. & Size) Round Pier
CB1G* 2’ - 6” 4’ - 0”
1.0
(8) #7
CB2G
3’ - 0” 4’ - 0”
1.2
(10) #7
CB3G
3’ - 6” 4’ - 0”
1.6
(12) #7
* Square pier option must be used for CB1G. Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
69