WM
WA L L M O U N T S - 1 LG
1LG The Universal One-Legged Mount (1LG) may be the one and only mount that can be installed on any part of any building. This mount is designed for many types of antennas – home, TV, MMDS, DBS and more. The mount has a 1-1/4” O.D. mounting pipe and includes (4) 1/4” dia. x 2” long lag screws for installation. The mount is galvanized for corrosion protection and goes together quickly. The mount is easily shipped via UPS.
1.25” O.D. x 16GA Mounting Tube 7”
115o
12
”
276
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
WALL MOUNTS - PWM
WM
PWM The ROHN Pole Wall Mount (PWM) is designed to support most Satellite, PCS, Cellular, and Microwave antennas. The PWM allows you to vary the mounting pipe length and diameter, accepting 2 7/8” O.D. - 5“ O.D. mounting tubes. The PWM is hot-dip galvanized after fabrication for corrosion protection, and can easily be shipped UPS.
32” Optional hardware mounting kit P/N: HMK18M
Adjustable mast offset from wall at 16”, 22” and 28”
Includes: (4) 1/2” dia. x 18” threaded rods and sealant.
36”
Optional inside mounting angles, ordered separately. P/N: FY77 (2) required for mounting inside
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
277
WM
WA L L M O U N T S
WM4 The WM4 mount provides 3” clearance to the wall. The WM4 is hot-dip galvanized for corrosion protection. Masts are held in place with a unique “Anti-Twist” locking clamp. This mount includes (4) 1/4” dia. x 2” long lag screws for mounting.
Clamp Accepts 7/8” to 2 3/4” O.D. Mast Tube Diameters, mast ordered separately.
Anti-Twist Locking Screw
WM4
WM212 The WM212 mount provides 12” clearance to the wall. The WM212 is hot-dip galvanized for corrosion protection. Optional WMB12A diagonal is available to provide extra strength. Mount is pre-drilled to accept 1/2” dia. connectors. 2 3/8” O.D. x 0.154” wall x 6’ long Mounting Tube, provided with mount. 2.38” O.D. x 0.154” wall WMB12A Optional diagonal strap kit, ordered separately.
WM212
E X T E N D E D WA L L M O U N T A S S E M B L I E S Single and double extended wall mount assemblies can be used on masonry, wood, metal, and other types of walls using up to 1/4” dia. lag screws or bolts. The Wall Mounts are versatile, coming in a variety of stand off lengths and supporting 7/8” to 2 3/4“ O.D. masts. The mounts are available as single brackets or double brackets. Masts are held in place with a unique “Anti-Twist” locking clamp. Galvanized for durability, these Wall Mounts are UPS shippable.
Single: WM6S WM8S WM12S WM18S WM24S
Wall Clearance 6“ clearance 8” clearance 12“ clearance 18” clearance 24“ clearance
Double: WM8D WM12D WM18D WM24D
Wall Clearance 8” clearance 12“ clearance 18” clearance 24“ clearance
Single: Upper Bracket only
Clamp Accepts 7/8” to 2 3/4” O.D. Mast Tube Diameters, mast ordered separately. Double: Upper and Lower Bracket Anti-Twist Locking Screw
NOTE: Connectors to wall not included.
278
See page 301 for Mast options. Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
G-SERIES WALL MOUNTS
WM
G - S E R I E S WA L L B R AC K E T S & B A S E M O U N T S 60”
The HBUTVRO provides lateral support for 25G, 45G and 55G bracketed towers. The bracket is pre-drilled to accept 5/8” dia. connectors to wall at 16“ or 24” spacing.
HBUTVRO
Adjustable to position tower 18” - 36” from wall.
25GWM F O R 2 5 G WA L L S U P P O R T E D TO W E R S
60”
27”
The 25GWM upper bracket provides lateral support for 25G wall supported towers. The lower bracket provides both lateral and vertical support. The 25G base plate (P/N KH6775, not shown) is provided with mount to provide an adjustable 6” - 20” of clearance to wall. The brackets are pre-drilled to accept 5/8” dia. connectors at 16” or 24” spacing. A minimum 5’ separation between the top and bottom brackets is recommended.
74”
The KH1014 bracket provides lateral support for 65G bracketed towers. The brackets are pre-drilled to accept 3/4” dia. connectors to wall at various center-to-center spacings (4.75“ increments).
FOR
KH1014 65G BRACKETED TOWERS
Adjustable to position tower 18” - 30” from wall.
All mounts shown are hot-dip galvanized. Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
279