M
T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S
ROHN MODEL 80 GUYED TOWER S TA N D A R D G U Y B R A C K E T S F O R 8 3 & 8 4 S E C T I O N S (2 3/8” & 2 7/8” O.D. LEGS) GA80 Bill of Material
3
Item 1 2 3 4
2* Torque Bar Shown
1
Qty. 3 3 6 9
Part No. KC143 KC145 210047GA 210058GA
Description Bar Flat Bracket Guy .38 x 4.5 x4.5’ Bar Flat TA 2.75 x .38 x 1.82’ Bolt Assembly 3/4 x 2 HSB A325 Bolt Assembly 3/4 x 5 HSB A325
These guy brackets are designed for 5/8” EHS maximum guys at 80% guy radius. For use on ROHN Model 80 tower only, supported on brace clips. For single braced standard sections, guy bracket must be used at the top of the section.
4
For double braced standard sections, guy brackets may be used at any panel point.
Tower Brace (REF)
ROHN MODEL 80 GUYED TOWER S TA N D A R D G U Y BRACKETS FOR 85 SECTIONS (3 1/2” O.D. LEGS) GA85 Bill of Material 5 3 5
2* Torque Bar Shown
1 Tower Brace (REF)
4
Item 1 2 3 4 5
Qty. 3 3 6 9 3
Part No. KC144 KC465 210050GA 210059GA KC441
Description Bar Flat Bracket Guy .38 x 5 x 4.5’ Bar Flat TA .38 x 3.5 x1.83’ Bolt Assembly 3/4 x 2-3/4 HSB A325 Bolt Assembly 3/4 x 5-1/2 HSB A325 Spacer Bracket Guy .63 x 3.13 x 4.5”
These guy brackets are designed for 5/8” EHS maximum guys at 80% guy radius. For use on ROHN Model 80 tower only. For single braced standard sections, guy bracket must be used at the top of the section. For double braced standard sections, guy brackets may be used at any panel point.
282
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S
M
TORQUE ARM C H A N N E L A S S E M B LY F O R 8 0 T O W E R S
Available Sizes: • 10” Channel (C10x15.3) • 12” Channel (C12x20.7) • 15” Channel (C15x33.9)
Tower Leg Clamp
To order, provide leg size and desired channel size. Bolt Assembly with Beveled Washers Equalizer Plate
Tower Leg Bolt Assembly
Bottom Plate Bolt Assembly with Beveled Washers
NOTE: For single braced sections, torque arm must bear on brace clips above flange plates. For double braced sections, torque arm must bear on brace clips at any panel point.
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
283
M
T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S
REINFORCEMENTS FOR 80 SERIES TOWERS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT
Detail of bolt-on midspan horizontal brace.
To order, provide leg size and size of horizontal desired.
Detail of horizontal girt.
Added braces are shown as a bold line.
284
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard ©2011 ROHN PRODUCTS LLC
M
T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S
REINFORCEMENTS FOR 80 SERIES TOWERS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT Similar reinforcements available for 90 series towers. X-Brace Lug Requirements (Pipe) Leg O.D. Assy. P/N Lug P/N (1) U-Bolt Assy. (4) 2.38 KB497A KB299 JR83A 2.38 KB497ASP KB299SP JR84A 2.88 KB498A KB489 JR84A 2.88 KB498ASP KB489SP JR88A 2.88 KB498ASP1 KB489SP1 JR89A 3.50 KB499A KB492 JR88A
Detail of bolt-on lug.
For 80 Series towers
X-Brace Lug Requirements (Solid Rod) Leg O.D. Assy. P/N Lug P/N (1) U-Bolt Assy. (4) 2.25 KB565A KB555 JR83A 2.50 KB566A KB556 JR83A 2.75 KB567A KB557 JR84A 3.00 KB568A KB558 JR84A 3.25 KB569A KB559 JR88A
Standard Bracing Available Part No. KB35R KB36R 210018GA
Bracing (16 GA) Description 1.50” Tube, 16GA Diagonal 1.50” Tube, 16GA Horizontal 1/2 x 1-1/2 A325 Bolt Assy.
Part No. KB37R KB38R 210019GA
Bracing (11 GA) Description 1.50” Tube, 11GA Diagonal 1.50” Tube, 11GA Horizontal 1/2 x 1-3/4 A325 Bolt Assy.
Standard and Heavy Duty replacement braces are available. To order heavy duty braces, specify leg size and desired brace size.
of bolt-on horizontal brace. DetailDetail of bolt-on midspan horizontal bracket.
For 80/90 Series towers Added braces are shown as a bold line. Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
285
M
TOWER MODIFICATION MATERIAL - SELF-SUPPORTING TOWERS
SELF-SUPPORTING REINFORCEMENTS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT
Horizontal Girt (Typ) Girt Support Bracket
Tower Leg (Ref ) Diagonal Tower Braces
Bolt Assembly
Added horizontal girt to increase leg capacity (TYP) 1/2” Leg U-bolt
Center Plate
Bolt on brackets are available for all SSV towers.
Girt Support Bracket Bolt Assemblies
Center Plate
1/2” Leg U-Bolt
286
Diagonal Tower Braces (Ref )
Horizontal Girt (Typ)
VIEW A-A
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
TOWER MODIFICATION MATERIAL - SELF-SUPPORTING TOWERS
M
SSMW SELF-SUPPORTING REINFORCEMENTS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT
Added redundants to increase brace and leg capacity (TYP)
U-bolt Connection (Typical)
Bolt-on brackets are available for all SSMW legs and internal braces.
INTERNAL TOWER VIEW (Hip Bracing)
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC
287
M
T O W E R M O D I F I C AT I O N M AT E R I A L
GUY ANCHOR SELECTION CHART GUYS ULTIMATE SIZE & TYPE STRENGTH (LBS)
TURNBUCKLES ULTIMATE SIZE STRENGTH (LBS)
ANCHOR RODS COMPATIBLE WITH TURNBUCKLE SIZE GAC
3/16EHS
3990
3/8
6000
1/4EHS
6650
1/2
11000
GAR
GAC
GAC34
5/16EHS
11200
5/8
17500
GAR
GAC
GAC34
GAC56
3/8EHS
15400
5/8
17500
GAR
GAC34
GAC56
7/16EHS
20800
3/4
26000
GAR
GAC34
GAC56
GAC57
1/2EHS
26900
7/8
36000
GAC56
GAC57
9/16EHS
35000
7/8
36000
GAC56
GAC57
5/8EHS
42400
1
50000
3/4EHS
58300
1-1/4
76000
GAC57
GAC58
GAC59
GAC58
GAC59
ANCHOR RODS Type
Part No. Weight (lbs.) D L A B C T GAR30 9 5/8” 84” 1” 2” 13 5/8” 3/16” GAC303 84” 2” 1” GAC305 14 5/8” 3/16” 84” 2” 1” 25 3/4” 84” 2” 12” 1” 3/8” GAC3455TOP 65 120” 2-1/2” 12” 1-1/4” 1-1/4” 1/2“ GAC5655TOP 125 168” 3” 12” 1-3/8” 1-7/16” 3/4” GAC5755TOP GAC5855TOP 220 192” 4” 12” 1-3/4” 1-1/4” 1” 310 240” 4” 18” 1-3/4” 1-7/16” 1” GAC5955TOP
GAR GAC GAC GAC34 GAC56 GAC57 GAC58 GAC59
GAR30
GAC303
GAC3455TOP (5) 11/16”HOLES
GAC5855TOP
GAC305
GAC5655TOP
GAC5955TOP
(3) 9/16”HOLES
(5) 13/16”HOLES
(5) 9/16”HOLES
(5) 15/16”HOLES
1/2” dia. bolts provided
C
(5)1-3/16”HOLES
GAC5755TOP
A A
(5) 1-3/16”HOLES
C
A
C T
C
A
T
3/4” dia. bolt included (2) 3/16” plates, one on each side
L
L
L
GAR30 Anchor Rod
288
D
D
5-1/4"
5-1/4"
L
D
D
B
B
NOTE: GAC Anchors require use of eye and eye turnbuckles. All other anchors are for use with eye and jaw turnbuckles. Refer to page 297. Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC