ROHN Utility Poles by ROHN Products, LLC

UTILITY POLES

PRE-ENGINEERED UTILITY POLES

GENERAL USE ROHN Pre-Engineered steel utility poles offer a light duty solution to satisfy utilities desiring an alternative to wood poles. ROHN’s line of Pre-Engineered poles are lighter than typical wooden and concrete poles and provide easy installation and low maintenance. ROHN offers Pre-Engineered poles for either direct embed or flange installations. The poles come standard with a hot-dip galvanized coating, but can also be painted or fabricated with weathering steel.

FEATURES • Fast, easy installation • Each pole ships with the following: • Standard ground sleeve (at grade) • Standard sub-grade corrosion coating

to 6” above grade • Cap plate • (2) 4” Nema Ground Lugs • Bearing Plate with drain hole • Jacking Lugs (at slip splices) • Optional items are available and may be ordered separately: • Step attachment clips • Climbing pegs / step bolts • Safety climb device • Port holes • Flanged base • Painted finish • Custom designs are available for any height or application.

227

UTILITY POLES

BUYERS GUIDE

H 1 0 R P (18,400# / 11,500#) TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LBS)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H10RP040 H10RP045 H10RP050 H10RP055 H10RP060 H10RP065 H10RP070 H10RP075 H10RP080 H10RP085 H10RP090 H10RP095 H10RP100 H10RP105 H10RP110 H10RP115 H10RP120

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

21.2 22.4 23.5 25.1 26.3 27.6 28.8 30.1 31.3 32.6 33.8 34.4 35.7 36.9 38.2 39.4 40.7

0.230 0.231 0.230 0.238 0.238 0.240 0.240 0.241 0.241 0.242 0.242 0.236 0.237 0.237 0.238 0.238 0.239

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1945 2253 2581 3074 3440 3896 4304 4765 5210 5666 6148 6779 7282 7918 8459 9153 9731

OVERTURNING MOMENT CAPACITY (FT-KIP) 368 420 472 523 576 627 680 730 785 834 890 937 995 1041 1100 1141 1206

OTM @ 5’ = 183 ft-kips

TOTAL LENGTH (FT) “L”

Overturning moment capacity at 5’ below tip.

The part number shown in the chart includes the pole loading and the overall length of the structure. The coating suffix (W or G) is added by the customer at the time of the order, along with any optional items (flanged base, step clips and safety device, ports, special grounding lugs, special ground sleeves and paint). The example below provides a guide, for ordering convenience. Pole Part Number

Finish

H10 RP 050 W Pole Loading

ROHN Products

Pole Finish, select either: - Weathering - Galvanized

Overall Pole Length (ft.)

Diameters are out-to-out width between flats. Slope is change in diameter per foot of length. Overturning moment capacity is at grade. In the example shown, the customer is purchasing an H10RP, with an overall length of 50’. The pole is to be constructed of Weathering Steel, with a Direct Embed Base. NOTE: Values in (

) indicate horizontal factored loads applied 2’ from the tip.

H 1 0 R P ( 18,400# / 11,500#) Equivalent factored load for wood poles

Factored load for steel poles

Embedment depths illustrated may require adjustment based on local soil conditions.

228

UTILITY POLES

P R O D U C T D ATA C 1 R P (4,500# / 2,812#) TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

C1RP040 C1RP045 C1RP050 C1RP055 C1RP060 C1RP065 C1RP070 C1RP075 C1RP080 C1RP085 C1RP090 C1RP095 C1RP100 C1RP105 C1RP110 C1RP115 C1RP120

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

13.1 13.1 13.1 14.8 14.8 17.2 17.2 19.5 19.5 21.3 21.3 23.7 23.7 25.7 25.7 27.5 27.5

0.140 0.124 0.112 0.133 0.122 0.149 0.139 0.160 0.150 0.162 0.153 0.171 0.162 0.173 0.165 0.174 0.167

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

981 1092 1201 1442 1553 1876 1999 2337 2477 2840 2937 3403 3560 4033 4197 4643 4820

OVERTURNING MOMENT CAPACITY (FT-KIP) 91 103 117 128 143 153 169 179 196 204 223 229 250 267 277 280 305

OVERTURNING MOMENT CAPACITY (FT-KIP) 75 84 96 105 116 137 147 157 168 178 189 199 209 215 220 230 241

OVERTURNING MOMENT CAPACITY (FT-KIP) 61 68 78 85 96 102 113 119 131 136 144 153 161 170 178 187 195

OTM @ 5’ = 53 ft-kips

PART NUMBER

OTM @ 5’ = 53 ft-kips

TIP AGL (FT)

OTM @ 5’ = 51 ft-kips

TOTAL LENGTH (FT) “L”

7.5” Tip

C 2 R P (3,700# / 2,313#) TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

C2RP040 C2RP045 C2RP050 C2RP055 C2RP060 C2RP065 C2RP070 C2RP075 C2RP080 C2RP085 C2RP090 C2RP095 C2RP100 C2RP105 C2RP110 C2RP115 C2RP120

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

13.1 14.5 14.5 15.9 15.9 17.3 17.3 18.7 18.7 20.1 20.1 22.0 22.0 23.7 23.7 25.5 25.5

0.140 0.156 0.140 0.153 0.140 0.151 0.140 0.149 0.140 0.148 0.140 0.153 0.145 0.154 0.147 0.157 0.150

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

981 1161 1277 1505 1629 1882 2007 2274 2406 2674 2818 3222 3368 3774 3928 4383 4547

C 3 R P (3,000# / 1,875#) TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

C3RP040 C3RP045 C3RP050 C3RP055 C3RP060 C3RP065 C3RP070 C3RP075 C3RP080 C3RP085 C3RP090 C3RP095 C3RP100 C3RP105 C3RP110 C3RP115 C3RP120

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

13.1 14.5 14.5 15.9 15.9 17.3 17.3 18.7 18.7 20.1 20.1 21.5 21.5 22.9 22.9 24.3 24.3

0.140 0.156 0.140 0.153 0.140 0.151 0.140 0.149 0.140 0.148 0.140 0.147 0.140 0.147 0.140 0.146 0.140

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

981 1161 1277 1505 1626 1882 2007 2274 2406 2677 2818 3169 3312 3678 3828 4224 4384

Embedment (L x .10) + 2’

13.1” - 27.5” Base Diameter

229

UTILITY POLES

P R O D U C T D ATA H 1 R P (5,400# / 3,375#) TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H1RP040 H1RP045 H1RP050 H1RP055 H1RP060 H1RP065 H1RP070 H1RP075 H1RP080 H1RP085 H1RP090 H1RP095 H1RP100 H1RP105 H1RP110 H1RP115 H1RP120

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

13.1 14.2 14.2 16.0 16.0 18.5 18.5 21.0 21.0 23.0 23.0 26.0 26.0 28.0 28.0 29.5 29.5

0.140 0.149 0.134 0.155 0.142 0.169 0.157 0.180 0.169 0.182 0.172 0.195 0.185 0.195 0.186 0.191 0.183

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

981 1161 1261 1516 1636 1966 2102 2465 2611 2952 3092 3705 3872 4309 4488 4950 5133

OVERTURNING MOMENT CAPACITY (FT-KIP) 109 138 140 153 171 184 202 214 234 245 246 278 298 305 330 336 363

OVERTURNING MOMENT CAPACITY (FT-KIP) 129 146 165 182 202 218 239 254 277 290 314 326 352 362 390 398 428

OVERTURNING MOMENT CAPACITY (FT-KIP) 150 171 193 213 235 255 278 298 321 340 365 382 407 424 451 466 494

OTM @ 5’ = 62 ft-kips

PART NUMBER

OTM @ 5’ = 57 ft-kips

TIP AGL (FT)

OTM @ 5’ = 52 ft-kips

7.5” - 8” Tip

TOTAL LENGTH (FT) “L”

H 2 R P (6,400# / 4,000#) TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H2RP040 H2RP045 H2RP050 H2RP055 H2RP060 H2RP065 H2RP070 H2RP075 H2RP080 H2RP085 H2RP090 H2RP095 H2RP100 H2RP105 H2RP110 H2RP115 H2RP120

7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8

13.6 16.0 16.0 17.5 17.5 19.4 19.4 22.0 22.0 24.5 24.5 27.3 27.3 29.4 29.4 31.4 31.4

0.145 0.182 0.164 0.176 0.162 0.178 0.166 0.189 0.178 0.196 0.186 0.205 0.195 0.206 0.196 0.205 0.197

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1016 1251 1375 1638 1765 2056 2194 2592 2744 3138 3304 3880 4055 4510 4698 5236 5433

H 3 R P (7,500# / 4,688#)

Embedment (L x .10) + 2’

13.1” - 33” Base Diameter

230

TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H3RP040 H3RP045 H3RP050 H3RP055 H3RP060 H3RP065 H3RP070 H3RP075 H3RP080 H3RP085 H3RP090 H3RP095 H3RP100 H3RP105 H3RP110 H3RP115 H3RP120

8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

14.8 17.0 17.0 18.8 18.8 21.0 21.0 23.2 23.2 26.0 26.0 28.6 28.6 31.2 31.2 33.0 33.0

0.170 0.200 0.180 0.196 0.180 0.200 0.186 0.203 0.190 0.212 0.200 0.217 0.206 0.221 0.211 0.217 0.208

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1077 1309 1440 1728 1865 2184 2335 2708 2870 3302 3475 4044 4226 4775 4973 5480 5684

UTILITY POLES

P R O D U C T D ATA H 4 R P (8,700# / 5,438#) TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H4RP040 H4RP045 H4RP050 H4RP055 H4RP060 H4RP065 H4RP070 H4RP075 H4RP080 H4RP085 H4RP090 H4RP095 H4RP100 H4RP105 H4RP110 H4RP115 H4RP120

8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5

16.5 18.2 18.2 20.2 20.2 22.2 22.2 24.3 24.3 27.2 27.2 30.0 30.0 32.3 32.3 34.9 34.9

0.200 0.216 0.194 0.213 0.195 0.211 0.196 0.211 0.198 0.220 0.208 0.226 0.215 0.227 0.216 0.230 0.220

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1116 1336 1476 1786 1935 2253 2410 2788 2956 3403 3589 4171 4365 4929 5137 5766 5985

OVERTURNING MOMENT CAPACITY (FT-KIP) 174 199 223 247 273 296 322 345 372 394 421 443 471 492 522 541 572

OVERTURNING MOMENT CAPACITY (FT-KIP) 200 228 257 284 314 341 371 397 429 453 487 509 545 566 603 622 662

OVERTURNING MOMENT CAPACITY (FT-KIP) 228 260 292 324 357 388 421 452 486 517 551 581 616 645 681 709 746

OTM @ 5’ = 82 ft-kips

PART NUMBER

OTM @ 5’ = 80 ft-kips

TIP AGL (FT)

OTM @ 5’ = 71 ft-kips

TOTAL LENGTH (FT) “L”

8.5” - 9” Tip

H 5 R P (10,000# / 6,250#) TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H5RP040 H5RP045 H5RP050 H5RP055 H5RP060 H5RP065 H5RP070 H5RP075 H5RP080 H5RP085 H5RP090 H5RP095 H5RP100 H5RP105 H5RP110 H5RP115 H5RP120

9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0

17.5 20.0 20.0 22.0 22.0 24.3 24.3 26.5 26.5 29.0 29.0 31.7 31.7 34.3 34.3 37.0 37.0

0.213 0.244 0.220 0.236 0.217 0.235 0.219 0.233 0.219 0.235 0.222 0.239 0.227 0.241 0.230 0.243 0.233

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1181 1447 1601 1929 2090 2459 2631 3016 3198 3625 3820 4436 4640 5231 5449 6137 6365

H 6 R P (11,400# / 7,125#) TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H6RP040 H6RP045 H6RP050 H6RP055 H6RP060 H6RP065 H6RP070 H6RP075 H6RP080 H6RP085 H6RP090 H6RP095 H6RP100 H6RP105 H6RP110 H6RP115 H6RP120

9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0

18.3 21.0 21.0 23.2 23.4 25.7 25.9 28.3 28.3 30.8 30.8 33.4 33.4 37.0 37.0 38.5 38.5

0.230 0.267 0.240 0.258 0.237 0.257 0.239 0.257 0.241 0.256 0.242 0.257 0.244 0.267 0.255 0.257 0.246

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1211 1495 1655 2003 2173 2565 2741 3191 3381 3816 4021 4622 4835 5592 5820 7182 7529

Embedment (L x .10) + 2’

16.5” - 38.5” Base Diameter

231

UTILITY POLES

P R O D U C T D ATA H 7 R P (13,120# / 8,200#) TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H7RP040 H7RP045 H7RP050 H7RP055 H7RP060 H7RP065 H7RP070 H7RP075 H7RP080 H7RP085 H7RP090 H7RP095 H7RP100 H7RP105 H7RP110 H7RP115 H7RP120

10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0

20.0 21.3 22.5 22.8 24.0 25.2 26.4 27.6 28.8 30.2 31.3 31.9 33.1 34.3 35.5 36.7 37.9

0.250 0.250 0.250 0.233 0.233 0.234 0.234 0.235 0.235 0.238 0.236 0.231 0.231 0.231 0.232 0.232 0.233

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1336 1558 1791 2565 2867 3180 3509 3816 4219 4643 5008 5899 6365 6853 7356 7853 8369

OVERTURNING MOMENT CAPACITY (FT-KIP) 263 299 337 373 411 446 485 521 559 595 634 668 710 742 784 816 859

OVERTURNING MOMENT CAPACITY (FT-KIP) 301 343 385 428 471 512 556 597 642 682 727 766 814 851 900 935 986

OVERTURNING MOMENT CAPACITY (FT-KIP) 315 383 420 478 526 572 621 667 716 761 812 856 908 950 1004 1045 1100

OTM @ 5’ = 133 ft-kips

PART NUMBER

OTM @ 5’ = 130 ft-kips

TIP AGL (FT)

OTM @ 5’ = 85 ft-kips

10.0” Tip

TOTAL LENGTH (FT) “L”

H 8 R P (15,040# / 9,400#) TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H8RP040 H8RP045 H8RP050 H8RP055 H8RP060 H8RP065 H8RP070 H8RP075 H8RP080 H8RP085 H8RP090 H8RP095 H8RP100 H8RP105 H8RP110 H8RP115 H8RP120

10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0

19.2 20.4 21.5 22.2 23.3 24.4 25.6 26.8 27.9 29.1 30.2 30.9 32.0 33.2 34.3 35.4 36.6

0.230 0.231 0.230 0.222 0.222 0.222 0.223 0.224 0.224 0.225 0.224 0.220 0.220 0.221 0.221 0.221 0.222

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1712 1993 2295 2645 2968 3366 3726 4161 4553 4961 5385 5925 6331 6917 7404 8040 8560

H 9 R P (16,800# / 10,500#)

Embedment (L x .10) + 2’

20.0” - 38.7” Base Diameter

232

TOTAL LENGTH (FT) “L”

TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H9RP040 H9RP045 H9RP050 H9RP055 H9RP060 H9RP065 H9RP070 H9RP075 H9RP080 H9RP085 H9RP090 H9RP095 H9RP100 H9RP105 H9RP110 H9RP115 H9RP120

10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0

20.0 21.2 22.5 23.1 24.5 25.7 27.0 28.1 29.5 30.7 32.0 33.2 33.9 35.1 36.2 37.5 38.7

0.250 0.249 0.250 0.238 0.238 0.240 0.240 0.241 0.241 0.242 0.242 0.236 0.237 0.237 0.238 0.238 0.239

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1754 2050 2364 2740 3085 3477 3853 4314 4728 5175 5607 6153 6625 7240 7754 8401 8946

UTILITY POLES

P R O D U C T D ATA H 1 0 R P (18,400# / 11,500#) TIP AGL (FT)

PART NUMBER

TIP DIAMETER (IN)

BASE DIAMETER (IN)

SLOPE (IN/FT)

NO. SECTIONS

WEIGHT (LB)

40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120

34.0 38.5 43.0 47.5 52.0 56.5 61.0 65.5 70.0 74.5 79.0 83.5 88.0 92.5 97.0 101.5 106.0

H10RP040 H10RP045 H10RP050 H10RP055 H10RP060 H10RP065 H10RP070 H10RP075 H10RP080 H10RP085 H10RP090 H10RP095 H10RP100 H10RP105 H10RP110 H10RP115 H10RP120

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

21.2 22.4 23.5 25.1 26.3 27.6 28.8 30.1 31.3 32.6 33.8 34.4 35.7 36.9 38.2 39.4 40.7

0.230 0.231 0.230 0.238 0.238 0.240 0.240 0.241 0.241 0.242 0.242 0.236 0.237 0.237 0.238 0.238 0.239

1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3

1945 2253 2581 3074 3440 3896 4304 4765 5210 5666 6148 6779 7282 7918 8459 9153 9731

OVERTURNING MOMENT CAPACITY (FT-KIP) 368 420 472 523 576 627 680 730 785 834 890 937 995 1041 1100 1141 1206

OTM @ 5’ = 183 ft-kips

TOTAL LENGTH (FT) “L”

12.0” Tip

Design Notes: 1. Pole designs are in accordance with ASCE 48, “Design of Steel Transmission Pole Structures”. 2. Pole sections are ASTM grade 65 material with a charpy impact value of 15 ft-lbs at -20 o F. 3. Multiple section poles include slip splice joints with a minimum slip length equal to 1.5 times the inside diameter across flats of the outer section at the splice. 4. Galvanized poles are hot-dip galvanized in accordance with ASTM A123. 5. Tabulated weights assume galvanized poles.

Embedment (L x .10) + 2’

21.2” - 40.7” Base Diameter

233

UTILITY POLES

PA R T S & A CC E S S O R I E S SAFETY CABLE SYSTEM

15”

STEP BOLTS STEP BOLTS AND STEP BOLT CLIPS ARE OPTIONAL AND MUST BE SPECIFIED AT TIME OF ORDER.

CLIMBING HARNESS TTFBH-4D JOURNEYMAN HARNESS

TTFBH-C/P

PROFESSIONAL HARNESS

234

Pole Height (AGL)

Part Number

30’ - 50’ 60’ - 100’ 110’ - 150’

TT050TSP TT100TSP TT150TSP

SAFETY CABLE SLIDER WITH CARABINEER TT-WG-500-W/SMC