Proudly 100% Australian owned & made. TYRE SHIELD KG9805 KG9810 KG9815 KG9825 KG9830
TYRE SHIELD PINK TSP 125ML(PACK-12) TYRE SHIELD PINK TSP 250ML(PACK-9) TYRE SHIELD PINK TSP 500ML(PACK-6) TYRE SHIELD PINK TSP 1LITRE(PACK-4) TYRE SHIELD PINK TSP 20LITRE DRUM
TYRE SHIELD seals holes in both tube and tubeless tyres caused by puncturing objects up to 6mm in diameter which appear in the tread area of the tyre and 3mm in tube type tyres as the vehicle is being driven.
TYRE SHIELD does not affect tyres or rims. TYRE SHIELD helps to extend tyre life by the combination of maintaining correct balance and the prevention of heat build up. TYRE SHIELD will not damage steel, aluminium or tyre rubber. Balances tyres in motion. Seals all pourous leaks and bead leaks. TYRE SHIELD is a puncture preventative. It is an inert substance pumped through the valve stem of tyres, which are then rotated and consequently are sealed against pourous and rim leaks.
Points to Remember Sealing will only occur on the tread of the tyre, i.e., from shoulder to shoulder in the tread area. Sealing will not occur on tyre side wall as centrifugal force does not operate on this portion of the tyre, and there is too much flexing in the side wall. Pneumatic Tyres TYRE SHIELD is only applied into pneumatic tyres, i.e., all tyres which are inflated with air. Caution should be taken that there is no water in tyres before applying the product. Ensure that compressors contain water traps which prevent water from collecting in air lines, as all compressors generate water. Under Inflation Problem: Under inflated tyres can be dangerous. Under inflation is a frequent cause of tyre damage. Excessive flexing, which build up internal heat eventually weakens the side of the tyre. Under inflation will also cause rapid tread wear. Solution: TYRE SHIELD seals all pourous leaks, thus maintaining correctly inflated tyre pressure in tubeless tyres.
Problem: Under inflation leads to poor steering response, reduces cornering ability and can cause loss of control in emergencies. Solution: TYRE SHIELD seals tyres and rims of pourous leaks and will seal most punctures in the tread area of tubeless tyres caused by puncturing objects up to 6mm in diameter as the vehicle is being driven. Problem: Under inflation increases rolling resistance in the tyre. This acts like a dragging brake and can significantly increase fuel consumption. Solution: TYRE SHIELD seals all pourous leaks in tubeless tyres and rims, thus maintaining correctly inflated tyre pressure. Problem: Under inflation can make the side walls of the tyre vulnerable to damage from kerbs, potholes and sharp objects on the road.
drain away. This causes aquaplaning and can result in total loss of steering control, especially during cornering or braking. Solution: TYRE SHIELD seals all pourous leaks in tubeless tyre rims, thus maintaining correctly inflated tyres.
Recommended Minimum amounts: 1. Push bike tyre – 60 ml per tyre 2. Ride-on mower – 60 ml per tyre 3. Motorbike – 50 ml front tyre / 100 ml back tyre 4. AG Bike – 60 ml front tyre / 100 ml back tyre 5. Standard car type – 100ml per tyre 6. A.T.V. and 4WD – 200 ml per tyre 7. Super singles, truck tyres and desert duals – 500ml per tyre 8. Truck tyres 1000 x 20 – 200ml per tyre
Solution: TYRE SHIELD seals all pourous leaks in tyre rims and seals punctures in the tread area of tubeless tyres caused by puncturing objects no larger than 6mm as the vehicle is being driven. Problem: Under inflation is dangerous in wet weather which allows the tread grooves to close up so that water cannot
www.ronangel.com.au
Tyre Shield – Puncture Resistance
TYRE SHIELD prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.