Saw blade projection Length of cut Main saw motor Saw carriage speed Pusher Air flotation tables Voltage Controller On Board Optimizer
105mm ~ 115mm ~ 140mm 3300 mm ~ 3800mm ~ 4500mm 25 Hp (optional upgrade to 40Hp) 5-150 m/min 0-80 m/min Included 480/3ph/60Hz G-Vision XP Included
Giben America, Inc. 2915 Courtyards Drive Suite C, Norcross, GA 30071 770-448-9140 ~ Fax 770-448-9133 ~ www.giben.com ~ sales@giben.com
Also available as a rear load model; Front aligners in the rip area Lift table 620 mm Automatic loading from the lift table Option to add an infeed conveyor or direct load onto the lift table. THE SAW CARRIAGE travels on two parallel cylindrical guide bars, positioned on a horizontal plane. Large diameter "V" rollers (86 mm), with spring loaded counter rollers, provide smooth linear travel of the saw carriage, providing optimal distribution of the loads and weights, very low contact pressure and is virtually free from wear. The weight and loads acting on the saw carriage are equally distributed between all the saw carriage rollers. The saw carriage runs absolutely dry on its guide bars, and no lubrication or adjustment is required. This construction concept has been used and trusted by Giben for over 30 years and guarantees the maximum structural rigidity and stability during the cut cycle. The floating action grippers retracting lower fingers.
are
equipped
3300 cutting length equipped with seven 3800 cutting length equipped with eight 4500 cutting length equipped with nine
Giben America, Inc. 2915 Courtyards Drive Suite C, Norcross, GA 30071 770-448-9140 ~ Fax 770-448-9133 ~ www.giben.com ~ sales@giben.com
with