STRUCTURAL RENOVATION steinhauser.bz | 1300209-05 | 06-13
VGZ WOOD-WOOD
VGZ FULLY THREADED SCREW WITH CYLINDRICAL HEAD
Art. code VGZ7xxx / VGZ9xxx
Constructive solution: Through the use of a timber slab placed above the existing beam, a structural reinforcement which mixes lightness and material compatibility is realized. Thanks to this dry-fixing, the system is lightly invasive and totally reversible.
Product Description The self tapping screw VGZ, thanks to the thread running along the full length and through a cross placed installation with “X� configuration, provides an high level of performance as regard resistance and stiffness. In particular, stiffness is the most important feature to be reached in order to guarantee the best efficiency for the reinforcement.
Concealed, strong and stiff connection High resistances with few screws Cylindrical head for a concealed penetration System tested and studied in collaboration with Trento University Ask for your calculation advice to Rothoengineer
CALCULATION SOFTWARE VGZ
VB WOOD-CONCRETE
VB CONNECTOR FOR COMPOSITE WOOD-CONCRETE FLOOR
Art. code
CS100xxx
Constructive solution: Through the use of a concrete slab placed above the existing beam, a structural reinforcement which provides high resistance and stiffness in both direction of the floor is realized. This system provides also high acoustic performance.
Product Description The connectors VB, thanks to the ring stopper and through a cross placed installation with a 45° inclination along the beam in a “X” configuration, provide a very fast and precise assembling without the interruption of the planking. The small diameter and the dry-fixing enhance the system to be lightly invasive and well enough reversible.
Quick dry-fixing by a standard screwdriver Lightly invasive and reversible self-tapping system Limited spill thanks to the ring stopper Installation with a continuing planking Software of calculation online for easy design
CALCULATION SOFTWARE VB
SOUNDPROOFING
Silent floor
Art. code
SOUNDPROOFING AGAINST FOOTSTEP NOISE
DZ400412
Constructive solution: Developed for be installed within acoustic finishing systems; intended especially for restoration works with VB fasteners thanks to its bituminous matrix which seals hermetically the hole of connector.
Product Description Bitumen/syntheticneedle- punched soundproof membrane. Guarantees excellent mechanical characteristics, puncture-proof, protection of underlying floor even during open building site phase.
High mechanical strength double-layer, 6 mm thick High resilience for floating floor insulation T he use of its specific self-adhesive strip is recommended
ADDITIONAL PRODUCT black band
Art. code DZ100150/DZ100200
ADDITIONAL PRODUCT silent edge Perfect water seal due to correct taping Needle-punching on the underside keeps the product in the original installation position
Art. code
DZ45010050
BEAM’S HEAD PROTECTION
BEAM PROTECT PROTECTIVE BREATHABLE SYNTHETIC MEMBRANE
Art. code
DZ564275
Constructive solution: Waterproofing polypropylene membrane which protects timber beam’s head against damp, water damage or water rising from concrete. Additionally, the high breathable value of the membrane enhance the humidity dispersal.
High breathable waterproofing polypropilen membrane (h= 27,5 cm)
T o be used with Flexi Band for a perfect sealing of details
VGZ FLANKED BEAMS
VGZ FULLY THREADED SCREW WITH CYLINDRICAL HEAD Constructive solution: The reinforcement of timber beams can be realized through the fixation of another timber beam placed laterally on the side and conveniently jointed. Thanks to the dry-fixing, this system is lightly invasive and totally reversible.
High resistances with few screws Cylindrical head for a concealed penetration
Art. code VGZ7xxx / VGZ9xxx
XEPOX PROSTHETIS
XEPOX
Art. code
TWO-PART EPOXY ADHESIVE
XP400150
Constructive solution: The end part of a timber beam which is directly inserted in the wall is often subjected to durability problems. In extreme cases it is necessary the replacement of the damaged part through a timber prosthetis realized with new wood.
Product Description
100% Epoxy adhesive
The connection between the existing beam and the replaced new part is realized with metal elements
Excellent fluidness, wetting properties and adhesiveness
and epoxy resin conveniently designed in order to transfer the stres-
Different densities and sizes for multiple applications
ses. The connection can be realized with steel rods placed laterally or with inner steel plates with grip-
Volume inalterability and reliability over time
ping capacity.
Sold by volume
XEPOX MATERIAL RECONSTRUCTION
XEPOX
Art. code
TWO-PART EPOXY ADHESIVE
XP400100
Constructive solution: The end part of a timber beam which is directly inserted in the wall is often subjected to durability problems. In many cases it is possible to reconstruct the wood material through steel rods and epoxy resins mixed with other material.
Product Description
100% Epoxy adhesive
The material reconstruction of the wood is realized through epoxy adhesive often mixed, for big
Excellent fluidness, wetting properties and adhesiveness
thickness/volumes, with gravel or sand conveniently worked; also pie-
Different densities and sizes for multiple applications
ces of wood can be used in order to fill the space. According to the specific application, also steel rods
Volume inalterability and reliability over time
conveniently shaped can be used.
Sold by volume
03RIABEN
8 054247 473136
XEPOX
Art. code
TWO-PART EPOXY ADHESIVE
XP400060/XP400080
Constructive solution: The reinforcement of timber beams can be realized through the fixation of a “steel-reinforced wood board” placed on the strained side of the beam. The wood board is fixed with epoxy adhesive and its efficiency is due to the steel rods.
Excellent adhesion between steel rod and wood
Excellent fluidness, wetting properties and adhesiveness
DIRECT CONSULTING AND TRAINING • Technical support for clients and technical operators
• Specific designing of requested items
• Problem solving for the design and realization processes
• Implementation of products using 3D design software for timber structures
TIMBER STRUCTURES statics
MEMBRANES AND ACCESSORIES technical physics
FALL ARREST SYSTEMS safety
CREATION OF DESIGN TOOLS
TECHNICAL DRAWINGS
COD
TWO-PART EPOXY ADHESIVE
INSTRUCTION PAPER
TECHNICAL DATASHEETS
CALCULATION SOFTWARE