Roto SHAFTS by ROTO d.o.o.

Shafts

sewer cable appeasement water meter sandbox

SEWAGE shafts SEWAGE shaft

400, 600 Shafts are manufactured in one piece, which ensures the highest possible level of tightness. On entry and exit pages are prepared – no joints for PE, PP and PVC smooth or ribbed tubes of different dimensions.

Code Dimensions (wxh) Inflow-Outflow

5910 5911 5700 5703 5701 5702

SEWAGE shaft

400x1000 400x1500 625x1000 625x1250 625x1500 625x1750

DN110/125/160 DN110/125/160 DN160/200/250 DN160/200/250 DN160/200/250 DN160/200/250

800x1000 800x1250 800x1500 800x1750 800x2000 800x2250 800x2500 800x2750 800x3000 800x3500 800x4000

ADVANTAGES OF ROTO shafts DURABILITY, long life, water tightness, resistance. Fast, easy INSTALLATION, comprehensive solution, height adjustment. Small mass so they can be easily transported.

800

RESISTANCE to low and high temperatures (-65°C to +85°C), UV stability.

Code Dimensions (wxh) Inflow-Outflow

6951 6952 6953 6954 6955 6956 6957 6969 6970 6971 6972

160

250

200

AWARD FOR QUALITY

DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315 DN200/250/315

We provide service and tehnical advice in the field.

Affordable. Shafts are manufactured from enviromentally friendly polyethylene. Possibility of 100% RECYCLING. 1st AWARD international environmental partner. Designed in accordance with EU standards.

Slovenian product, fast delivery and delivery options.

www.roto.si

info@roto.si

Phone: +386 (0)2 52 52 175

SHAFTS CONSISTENT WITH THE STANDARDS: Ü PrEN 15229: 2055 Ü SIST EN 13598-1: 2004 Ü PrEN 13598-2: 2005 Ü SIST EN 14982-1: 200 Ü PrEN 15229 Ü SIST EN 13598-1 Ü pr EN 13598-2 Ü SIST EN 14982 Ü SISST EN 14802 Ü SIST EN 14830 Ü SIST EN 476 Ü SIST EN 1277

SEWAGE shafts SEWAGE shaft

1000 TECHNICAL APPROVAL

Code

6973 6958 6959 6960 6961 6962 6963 6964 6974 6975

Code

5823 5824 5825 5826 5827 5828 5829 5831 5833

Code

5812 5813 5814 5809 5816 5818 5810

www.roto.si

info@roto.si

Dimensions (wxh) Inflow-Outflow

1000x1250 1000x1500 1000x1750 1000x2000 1000x2250 1000x2500 1000x2750 1000x3000 1000x3500 1000x4000

DN200/315/400 DN200/315/400 DN200/315/400 DN200/315/400 DN200/315/400 DN200/315/400 DN200/315/400 DN200/315/400 DN200/315/400 DN200/315/400

Dimensions (wxh) Inflow-Outflow

1000x1500 1000x1750 1000x2000 1000x2250 1000x2500 1000x2750 1000x3000 1000x3500 1000x4000

DN500/630 DN500/630 DN500/630 DN500/630 DN500/630 DN500/630 DN500/630 DN500/630 DN500/630

Dimensions (wxh) Inflow-Outflow

1000x2000 1000x2250 1000x2500 1000x2750 1000x3000 1000x3500 1000x4000

DN800/1000 DN800/1000 DN800/1000 DN800/1000 DN800/1000 DN800/1000 DN800/1000

Phone: +386 (0)2 52 52 175

SEWAGE shafts SEWAGE shaft

1200

250

The internal bright diameter,

Code

5790 5791 5792 5793 5794 5795

Dimensions (wxh)

MAKING OF ADDITIONAL CONNECTIONS ARE MADE BY: a) mark the center, b) with the crown drill do the hole, c) clean it, d) install an entry seal and lubricate it with grease soap, e) with grease soap also lubricate the end of the tube, f) and slide the tube into the shaft.

1200

1200x2000 1200x2500 1200x3000 1200x3500 1200x4000 1200x4500

MOUNTING AND INSTALLATION shafts Connecting sewer pipe with smooth shaft

Adjust shaft to ground level with hand saw at the marked lines. It's also possible to weld additional extension to increase the shaft for 250 mm.

a) Cut prepared at the desired dimensions bits, b) remove the 15 mm edge at an angle of 30 degrees, c) lubricate the edge of the steep mount, d) grease seal and inner tube part sleeves.

Linking ribbed pipes DN/ID and DN/OD with shaft For corrugated pipes DN/ID the shafts are made with clamb ID, which is on the shaft and then we connect it with no problems to corrugated tube DN/ID. For corrugated pipes DN/OD the shafts are made with clamb OD, which is on the shaft and then we connect it with no problems to corrugated tube DN/OD.

www.roto.si

info@roto.si

Phone: +386 (0)2 52 52 175

INSTALLATION OF THE SHAFTS When the installation is taken into account the requirements and assumptions of the project documents, the recommendations of the manufacturer shafts and installations instructions from the SIST ENV 1046. Bright yet of final reinforced concrete slabs with a width of 200 mm, through which the static and dynamic loads transmitted to the hardened cover dam arround shaft should be at least 10 mm greater than the outer diameter of the shaft. The distance between the shaft and the final concrete plate must be at least 50 mm.

CABLE shafts CABLE shaft PKJ 600

CABLE shaft PKJ 1000 ADVANTAGES OF PKJ SHAFT Ü High tensile hardness - flexibility. Ü Due to shafts low weight it is easy to

transport and build in. Ü Simple adding (installation) of new

pipes. Ü Possibility of a plastic tray-fitting two

DN 580

950

920

215

200

CABLE shaft PKJ 800

285

DN 580

sizes PP, which is mounted large cabinet. Ü The lid is plastic, into which is poured concrete. Ü Possibility of installation of standard cast iron cover. Ü On the top of the shafts are notches, so that it can be cut according to the needs of the terrain. Ü Extended bottom edge prevents the rise of the shaft from earth because of groundwater. Ü At each site can be drilled shaft hole in the plastic wall and install a rubber sealing ring for 50, 110, 125 and bigger pipes.

DN 1000

950

615

810

DN 1100

335

Code

7483 7326 7530

DN 800 DN 920

Dimensions (wxh)

600x830 800x950 1000x950

OPTICAL COUPLING shaft SM1 SHAFT MPKJ with lid

Code

Dimensions (lxwxh)

7433

820x1250x540

SANDBOXES

Code

Dimensions (lxwxh)

7328

415x550x310

Code

6637 6635 7443 7442

www.roto.si

info@roto.si

Dimensions (wxh)

400x1000 400x1500 500x1500 500x1500 625x1000 625x1500

Phone: +386 (0)2 52 52 175

FITTING AND LAYING CABLE SHAFTS Ü Dig the hole at least 50 cm greater than the shaft is. Ü Adjust the bottom of the cave with a small fraction. Ü Fit the shaft and bury the bottom edge with earth. Ü In the lower round part of the shaft we drull holes. Ü Insert sealing rings for pipes and cabels. Ü We make straight cuts on laid pipes and pull them through the ring. Ü To link the concrete base and an auxiliary shaft use double-layer plastic hose. Ü We bury shaft mon layers with reinforcement. Ü Installed on the auxiliary shaft packaged plastic lid with concrete. Ü In case of mounting the shaft in the pavementm the shaft is inserted in the throat concrete framework on which to place the LTŽ lid framework. Ü Security shaft is used for storage and mechanical protection of optical cable. Ü The advantage of the shaft is easy to install, robust and guaranteed seal against water seepage.

ADVANTAGES OF SMALL CABLE SHAFTS: Ü Ability to switch cables from the cabinets to house foreign construction lockers without prejudice. Ü The possibility of transition, the distribution of terrestrial cable and HDPE pipes in relation to pet cupboard cabinets. Ü The shaft is extended at the bottom, enabling better restraint. Ü The shaft is bottomless, allowing easier introduction of HDPE pipes and cables. Ü Shafts cover is designes so that the valve, which serve to consolidate the manhole cover.

WATER METER shafts WATER METER shaft 1000 For one or more water meters

Ü MATERIAL: Tanks are made of

Code

Dimensions (wxh)

1000x1250

5808

WATER METER Termo shaft Code

For one or two water meters

Dimensions (wxh)

500 x 1000 600x1000

5854 7431

Code

Product

9132 Shaft cap hit for up to 600 kg load, 600

APPEASEMENT shafts APPEASEMENT shafts

800, 1000 250

650

Dimensions (wxh) H

800x1000 4000 1000x1000 4000

1000

ADITIONAL EQUIPMENT to the shafts Code Product 5890 Plastic trunk lid 600, 800, 1000 (only walkable) 600 Cast iron lid for capacity 12,5 t (without ventilation, with the concrete crown) 601 Cast iron lid for capacity 12,5 t (with holes for ventilation, with the concrete crown) 603 Cast iron lid for capacity 25 t (without ventilation, with the concrete crown) 604 Cast iron lid for capacity 40 t (without ventilation, with the concrete crown) 605 Cast iron lid for capacity 40 t (with holes for ventilation, with the concrete crown) 7334 Rubber sealing ring 50 for cable introduction 7336 Rubber sealing ring 50 for pipe introduction 7337 Rubber sealing ring 110 for pipe introduction 7338 Rubber sealing ring 125 for pipe introduction 7345 Circular saw for GTO 50 7346 Circular saw for GTO 110 7347 Circular saw for GTO 125 5900 Extension shaft H= 250, 500 1280015 Stairs from PE 1280016 Stairs galvanized

environmentally friendly polyethylene, which is suitable for clean water and faecal matter. Ü USE: It is intended to carry out an external water supply connection to individual houses and other small appliances. Ü ADVANTAGES: • Simple replacement and access to water meter. • Possibility of subsequent replacement lid. • The possibility of replacement of water meter without the shaft excavation. • Strong ribs prevent shaft deflection. • Shaft construction protects against frost in the coldest winter days.