Surplustronics - Adastra commercial Audio by Surplustronics Ltd

Bringing sound to life Commercial public address solutions

INTRODUCTION

The complete commercial public address solution Synonymous with high quality, reliability and performance, Adastra has a long established reputation as a leading supplier of the latest 100V line, public address, background music, induction loop and zoning systems. For over 60 years, Adastra has continued to provide a comprehensive range of products which offer versatile and cost effective solutions to cover a vast range of commercial and institutional installation applications.

Exceptional reliability is one of the fundamental keys to Adastraâ&#x20AC;&#x2122;s success, and is something that hasnâ&#x20AC;&#x2122;t been compromised whilst maintaining the cost effectiveness of the products.

Adastra products have been designed with ease of installation, setup and use in mind.

Whatever your requirements or application, Adastra has a quality, cost conscious solution for you.

www.surplustronics.co.nz

CONTENTS

Loudspeakers

Pages 2 - 31

A wide range of speakers suitable for a variety of applications. Including ceiling, wall, pendant, background and horn speakers, plus mounting brackets.

Amplifiers & Mixers

Pages 32 - 38

A selection of mixer amps and slave amps in various power ratings for 100V line or low impedance systems. CH-2

CH-1

CH-4

CH-3

CH-5

CH-6

A126 MIXER AMPLIFIER 120W

Zoning & Sound Sources ON M1/M6

M2/M7

M3/M8

M4/M9

MODE

DOWN

AUTO SCAN

M5/M10

TUNE

AD-100 RADIO TUNER

SHIFT

Products for medium to large installations providing area zoning and sound sources for a complete solution.

REMOTE SENSOR

SELECT MENU/INFO

OFF

DAB/FM

AUTO-SCAN

LA-600 INDUCTION LOOP AMPLIFIER INPUTS

PEAK CURRENT

MASTER

SIREN 0

CH 1

CH 2

CH 3

-10

+10

BASS

-10

+10

TREBLE

LOOP CURRENT

Pages 39 - 43

POWER

Induction Loop

Pages 44 - 45

Products to give people with hearing disabilities equal access to information and announcements, necessary in modern PA installations.

Portable PA

Pages 46 - 50

Megaphones and public address units ideal for compact and portable applications.

Accessories

Pages 51 - 57

A wide range of accessories to complement the entire Adastra range. Including rack accessories and paging microphones.

Technical Data

Pages 58 - 65

Technical information and a glossary of terms. Visit our website for full technical data on all our products

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

LOUDSPEAKERS | INTRODUCTION

Loudspeakers With a wide range of low impedance, 100V line and active speakers, Adastra products cover environments and applications with a focus on clear and efficient sound delivery. Find out more about low impedance, 100V line and active speaker systems at the back of this brochure. Frequency graphs for these speakers are available on the website: www.surplustronics.co.nz

Ceiling

Background

A wide range of ceiling speakers suitable for a variety of domestic and commercial sites, indoor or outdoor.

A variety of speakers ideal for background music in places such as bars, leisure centres and restaurants.

Pages 3 - 11

Pages 17 - 25

Pendants

Brackets

Suspended speakers that are ideal for places with high ceilings.

Brackets to aid mounting and positioning of speakers.

Page 12

Pages 26 - 27

Wall

Horns

Low-profile in-wall and surface mounted speaker units.

Weatherproof horn-loaded speaker units for sheltered and outdoor coverage.

Pages 13 - 16

Pages 28 - 31

Icon Guide Ω 100V LINE

100V Line

T 09-8375020

Max. weight load

LOW IMPEDANCE

DOUBLE INSULATED

140º DISPERSION

IP65

Low impedance

Double insulated

Dispersion angle

Weatherproof IP rating

F 09-8375019

GOLD

10kg

PLATED

QTY SUPPLIED

Max. weight load

Gold plated connections

Quantity supplied in box

E info@surplustronics.co.nz

www.surplustronics.co.nz

SL SERIES CEILING SPEAKERS | LOUDSPEAKERS

SL SERIES SLIMLINE CEILING SPEAKERS High-grade ceiling speakers featuring hi-flex polypropylene cone main driver for extended low frequency response, and a mylar tweeter unit for accurate HF reproduction. A flared wave-guide baffle helps to aid dispersion for wider coverage, and a precision 2-way filter network gives accurate high-low separation. The twist-fit grille enables quick and neat installation resulting in a premium quality sound delivery system.

Item ref Woofer Tweeter Dispersion angle Frequency response Impedance Crossover frequency Power rms Cutout Mounting depth SPL @ 1W/1m Dimensions Weight

203mmØ

GOLD PLATED

232mmØ

SL5

SL6

SL5

SL6

952.547 130mmØ (5.25“) PP cone 12mmØ (0.5“) mylar dome 160° 50Hz - 20kHz 8Ω 4.5kHz 35W 178mmØ 93mm 88dB 93 x 203mmØ 1.3kg

952.548 165mmØ (6.5“) PP cone 12mmØ (0.5“) mylar dome 160° 40Hz - 20kHz 8Ω 4.5kHz 40W 204mmØ 102mm 89dB 102 x 232mmØ 1.5kg

4 SPEAKER SET-UP WIRED IN SERIES-PARALLEL 4 x CEILING SPEAKERS SL5 Item ref: 952.547

102mm

160º DISPERSION

102mm Mounting depth

LOW IMPEDANCE

93mm

204mmØ

178mmØ

93mm Mounting depth

• Super-slim profile, great for discreet installations • Efficient 2-way crossover network • Gold-plated spring terminals • Sleek, understated profile • Flared baffle for wide dispersion • Fitted with 3-way “dog-ear” mounts

EXAMPLE SET-UP

AUDIO SOURCE AD100 (see page 43) Item ref: 952.979

AMPLIFIER A120 (see page 36) Item ref: 952.973

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

LOUDSPEAKERS | CD SERIES CEILING SPEAKERS

CD SERIES DIRECTIONAL CEILING SPEAKERS These easy fit ceiling speakers are ideal for main speakers, surround sound or remote speaker applications. The adjustable tweeter allows for the high frequencies to be focused in the direction of the listening area, this increases the flexibility when locating the speakers off-axis from the listeners. • 2-way easy fit ceiling speakers • Polypropylene woofer with rubber surround and Ferrofluid cooled silk dome tweeter • Adjustable directional tweeter • Spring-loaded terminal connections • Fitted with “dog-ear” mounts

101mm 93mm 74mm

83mm

LOW IMPEDANCE

155º DISPERSION

C5D

Item ref Woofer Tweeter Frequency response Impedance Dispersion Power max Power rms Cutout Mounting depth SPL @ 1W/1m Dimensions Weight

271mmØ

238mmØ

79mm Mounting depth

GOLD PLATED

227mmØ

193mmØ

202mmØ 72mm Mounting depth

85mm

67mm

166mmØ

90mm Mounting depth

C6D

C8D

C5D

C6D

C8D

952.528 130mmØ (5.25“) 18mmØ (0.7“) 85Hz - 20kHz 8Ω 155º 80W 40W 166mmØ 72mm 85dB (±2dB) 83 x 202mmØ 850g

952.534 165mmØ (6.5“) 18mmØ (0.7“) 60Hz - 20kHz 8Ω 155º 100W 50W 193mmØ 79mm 85dB (±2dB) 93 x 227mmØ 1.1kg

952.543 200mmØ (8“) 18mmØ (0.7“) 45Hz - 20kHz 8Ω 155º 120W 60W 238mmØ 90mm 87dB (±2dB) 101 x 271mmØ 1.7kg

2 SPEAKER MONO SOUND SYSTEM

EXAMPLE SET-UP

2 x CEILING SPEAKERS C8D Item ref: 952.543 AMPLIFIER A121 (see page 34) Item ref: 952.904

POWER OFF

MIC 1

T 09-8375020

MIC 2

0 10

LOW

HIGH

VOX

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

MASTER

F 09-8375019

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

A121 MIXER AMPLIFIER 120W

AUX IN

E info@surplustronics.co.nz

www.surplustronics.co.nz

CS SERIES | RC SERIES CEILING SPEAKERS | LOUDSPEAKERS

CS SERIES DUAL VOICE COIL CEILING SPEAKER A ceiling mount speaker that provides both left and right stereo channels from a single point, whilst maintaining channel separation. The speaker has dual mylar dome tweeters combined with a dual voice coil, polypropylene woofer to deliver a full, rich sound. Ideal for installation in small rooms.

Ω LOW IMPEDANCE

160º DISPERSION

GOLD PLATED

86mm

C6S 952.537 165mmØ (6.5“) 2 x 20mmØ (0.75“) 160º 70Hz - 20kHz 50W + 50W 25W + 25W 193mmØ 76mm 8Ω 89dB 86 x 227mmØ 1.4kg

227mmØ

Item ref Woofer Tweeter Dispersion angle Frequency response Power max Power rms Cutout Mounting depth Impedance SPL @ 1W/1m Dimensions Weight

71mm

193mmØ

• Stereo 2-way easy fit ceiling speaker with “dog-ear” mounts • Dual mylar dome tweeters for separation and clarity • Dual voice coil polypropylene woofer with rubber surround • Gold-plated spring terminals • White ABS frame with steel grille

76mm Mounting depth

C6S

RC SERIES SIMPLE CEILING SPEAKER A wide range speaker with a 5” polypropylene cone with foam rubber surround to minimise distortion. The housing is made from white ABS with a rigid steel grille also in white to mount discretely in a ceiling.

Ω LOW IMPEDANCE

165º DISPERSION

60mm

RC5 100.031 130mmØ (5“) PP cone 165º 100Hz - 12kHz 35W 20W 8Ω 170mmØ 54mm 88dB 60 x 190mmØ 1.25kg

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

190mmØ

Item ref Woofer Dispersion angle Frequency response Power max Power rms Impedance Cutout Mounting depth SPL @ 1W/1m Dimensions Weight

52mm

164mmØ

• 130mm (5”) polypropylene wide range speaker • Fitted with “dog-ear” mounts for quick installation • Fitted with attractive metal grille • Spring terminal connections

54mm Mounting depth

RC5

LOUDSPEAKERS | EC SERIES CEILING SPEAKERS | FIRE DOMES

EC SERIES QUICK-FIT CEILING SPEAKERS Metal framed ceiling speakers with a quick-fit design, suitable for mounting into almost any material.

• All metal, flush fitted grille • Fitted with spring clips for easy installation • Fitted with a quality speaker and 100V line transformer

84mm 68mm

69mm

54mm

83mm

80mm Mounting depth

265mmØ

227mmØ

200mmØ

166mmØ

160mmØ

74mm

134mmØ

60mm Mounting depth 75mm Mounting depth

EC5V

Ω 100V LINE

LOW IMPEDANCE

155º DISPERSION

Item ref Woofer Tweeter Dispersion angle Frequency response Power max: 8Ω Power rms: 8Ω Power rms: 100V line Cutout Mounting depth SPL @ 1W/1m Tappings Dimensions Weight

EC6V

EC8V

EC5V

EC6V

EC8V

952.161 133mmØ (5.25“) 38mmØ (1.5“) 155º 165Hz - 20kHz 60W 30W 8W 134mmØ 80mm 84dB 2, 4, 8W & 8Ω 82 x 160mmØ 500g

952.163 165mmØ (6.5“) 38mmØ (1.5“) 155º 125Hz - 20kHz 80W 40W 8W 166mmØ 60mm 85dB 2, 4, 8W & 8Ω 68 x 200mmØ 760g

952.165 200mmØ (8“) 44mmØ (1.75“) 155º 97Hz - 20kHz 100W 50W 10W 227mmØ 75mm 90dB 2.5, 5, 10W & 8Ω 84 x 265mmØ 1.34kg

FIRE DOMES

T 09-8375020

163mmØ 147mmØ

• All steel construction • Minimal profile for shallow cavities • Supplied with ceramic terminal block

132mmØ 113mmØ

Fire domes to fit Adastra metal quick-fit ceiling speakers. These steel back housings create a fire-resisting barrier to protect the speaker and ceiling cavity in case of fire.

76mm

FD5

NOTE: Fire regulations for certain buildings may require fire domes to be fitted to ceiling speakers to help prevent the possible spread of fire from floor to floor and maintain the fire alert sound system.

F 09-8375019

Item ref Suitable for Connection apertures Mounting aperture Dimensions Weight

E info@surplustronics.co.nz

62mm

FD6

952.166 952.167 EC5V (952.161) EC6V (952.163) 2 x 22mmØ knock-out 10mmØ knock-out 76 x 132mmØ 62 x 163mmØ 220g 280g

www.surplustronics.co.nz

CC SERIES CEILING SPEAKERS | LOUDSPEAKERS

CC SERIES 2-WAY CEILING SPEAKERS 2-way quick fit ceiling speakers with bass driver and directional dome tweeter giving an excellent frequency response, all housed in a white polymer frame with metal grille.

• Rotary selector switch for 100V line tappings or 8Ω • Fitted with “dog-ear” mounts for fixing to ceiling tiles 1-20mm in thickness • Spring loaded terminals for easy connection

102mm 100mm 88mm

90mm Mounting depth

CC5V

Ω 100V LINE

LOW IMPEDANCE

160º DISPERSION

CC6V

271mmØ

238mmØ

227mmØ

193mmØ

202mmØ

166mmØ 84mm Mounting depth

Item ref Woofer Tweeter Dispersion angle Frequency response Power rms: 8Ω Power rms: 100V line Cutout Mounting depth SPL @ 1W/1m Tappings Dimensions Weight

90mm

85mm

79mm

95mm Mounting depth

CC8V

CC5V

CC6V

CC8V

952.184 133mmØ (5.25“) 38mmØ (1.5“) 160º 85Hz - 20kHz 50W 20W 165mmØ 84mm 84dB (±2dB) 2.5, 5, 10, 15, 20W & 8Ω 88 x 202mmØ 1.15kg

952.153 165mmØ (6.5“) 38mmØ (1.5“) 160º 70Hz - 20kHz 50W 20W 195mmØ 90mm 89dB (±2dB) 2.5, 5, 10, 15, 20W & 8Ω 100 x 227mmØ 1.25kg

952.155 200mmØ (8“) 44mmØ (1.75“) 160º 60Hz - 20kHz 60W 50W 238mmØ 95mm 90dB (±2dB) 10, 20, 30, 40, 50W & 8Ω 102 x 271mmØ 1.85kg

10 UNIT CEILING SPEAKER ARRAY 10 x CEILING SPEAKERS CC6V (Tapped at 10W each) Item ref: 952.153

AUDIO SOURCE M50 (see page 57) Item ref: 952.193

AMPLIFIER A120 (see page 36) Item ref: 952.973

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

EXAMPLE SET-UP

LOUDSPEAKERS | EC56V CEILING SPEAKER | CM SERIES COMPACT CEILING SPEAKERS

EC56V METAL QUICK-FIT CEILING SPEAKER Metal framed ceiling speaker with a quick-fit design, suitable for mounting into almost any material. All metal, flush fit grille fitted with quality speaker and 100V line transformer. • Easy quick-fit mechanism • Slimline flush fitting grille

EC56V 952.168 135mmØ (5.25“) 155º 110Hz - 13kHz 6W 165mmØ 57mm 90dB (±3dB) 1.5W, 3W, 6W 60 x 197mmØ 638g

100V LINE

155º DISPERSION

165mmØ 57mm Mounting depth

60mm

Item ref Woofer Dispersion angle Frequency response Power rms Cutout Mounting depth SPL @ 1W/1m Tappings Dimensions Weight

197mmØ

EC56V

CM SERIES COMPACT CEILING SPEAKERS Compact ceiling speakers designed to match the design of low voltage light fittings. Their compact size allows them to be fitted in almost any location, especially where space is limited. • Ideal for boutiques, shops and hotel rooms • Easy 3 step fitting method • ABS body with metal grille • 4 wattage tappings

95mm

100mmØ

100mm Mounting depth

CM-V 100V LINE

120º DISPERSION

CM-VW Item ref Finish Speaker size Dispersion angle Frequency response Power rms Impedance Cutout Mounting depth SPL @ 1W/1m Tappings Dimensions Weight

T 09-8375020

CM-VC

952.176 952.180 White Chrome 63mmØ (2.5”) 120º 120º 120Hz - 20kHz 6W 13, 6.6, 3.3, 1.6kΩ 92mmØ 100mm 85dB 0.75W, 1.5W, 3W, 6W 95 x 100mmØ 650g

DISCREET CEILING SPEAKER ARRAY 8 x CEILING SPEAKERS CMVW

AUDIO SOURCE AD-200 (see page 43)

AMPLIFIER A60 (see page 36)

Item ref: 952.176

Item ref: 952.980

Item ref: 952.970

F 09-8375019

E info@surplustronics.co.nz

EXAMPLE SET-UP

www.surplustronics.co.nz

OV SERIES MARINE SPEAKERS | LOUDSPEAKERS

OV SERIES WEATHERPROOF SPEAKERS A pair of 2-way water resistant, oval speakers which are ideal for marine use or PA applications in bathrooms, swimming pools, patios etc. • Oval driver with PP carbon cone and rubber surround • Coaxial mylar dome tweeter with integral crossover • Magnetically shielded • Complete with fixing clips and screws

Ω IP34

LOW IMPEDANCE

x2 145º DISPERSION

QTY SUPPLIED

110mm

194mm

85mm

Dimensions Weight (each)

125.072 4Ω

125.075 8Ω 150 x 230mm (6” x 9”) 25mm (1”) 145º 60Hz - 20kHz 50W 229 x 156mm 90mm 85dB (±2dB) IP34

267mm

Item ref Impedance Woofer Tweeter Dispersion angle Frequency response Power rms Cutout Mounting depth SPL @ 1W/1m IP rating

OV-W8

217mm

OV-W4

90mm Mounting depth

267 x 110 x 194mm 1.61kg

OVW

4 MARINE SPEAKER SYSTEM WITH MIXER AMP AND SLAVE

EXAMPLE SET-UP

4 x MARINE SPEAKERS OV-W8 Item ref: 125.075

AMPLIFIER A121 (see page 34) Item ref: 952.904

SLAVE AMPLIFIER S121 (see page 35) Item ref: 952.908

POWER OFF

MIC 1

MIC 2

0 10

LOW

HIGH

VOX

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

MASTER

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

A121 MIXER AMPLIFIER 120W

AUX IN

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

LOUDSPEAKERS | OD SERIES MARINE SPEAKERS

OD SERIES WATER RESISTANT SPEAKERS A range of water resistant speakers for panel mounting, suitable for PA installations in swimming pools, bathrooms etc. • 2-way speakers • 5cm (2”) tweeter with mylar cone • IP35 rated • Plastic enclosure • Spade terminal connections (6mm) • Woofer with polypropylene cone • Built-in crossover • Includes fixing kit • Gasket included • Supplied in pairs

84.5mm

132mmØ

148mmØ 56mm Mounting depth

Ω IP35

LOW IMPEDANCE

Item ref Colour Impedance Speaker size Tweeter Dispersion angle Frequency response Power max. Power rms Cutout Mounting depth IP rating Temperature range Humidity max. SPL @ 1W/1m Dimensions Weight

T 09-8375020

65mm Mounting depth

x2 140º DISPERSION

QTY SUPPLIED

OD5

OD5-W4

OD5-B4

125.030 White 4Ω

125.041 Black 4Ω

OD5-W8

125.032 White 8Ω 130mmØ (5”) 50mm (2”) 140º 100Hz - 20kHz 80W 35W 112mmØ 56mm IP35 -20 - 85°C 95% 86dB 72.5 x 148mmØ 565g

F 09-8375019

180mmØ

72.5mm

112mmØ

OD6

OD5-B8

OD6-W4

OD6-B4

125.044 Black 8Ω

125.061 White 4Ω

125.047 Black 4Ω

E info@surplustronics.co.nz

OD6-W8

125.063 White 8Ω 165mmØ (6.5”) 50mm (2”) 140º 80Hz - 20kHz 100W 40W 132mmØ 65mm IP35 -20 - 85°C 95% 87dB 84.5 x 180mmØ 745g

OD6-B8 125.050 Black 8Ω

www.surplustronics.co.nz

OD SERIES MARINE SPEAKERS | LOUDSPEAKERS

SWIMMING POOL SOUND SYSTEM - WIRED IN SERIES PAIRS

EXAMPLE SET-UP

8 x CEILING SPEAKERS OD5-W4 Ceiling speakers Item ref: 125.030

AMPLIFIER A121 Mixer amp with USB/SD/FM (see page 34)

AUDIO SOURCE COM47 Paging mic (see page 56)

Item ref: 952.904

Item ref: 952.352

POWER OFF

MIC 1

MIC 2

0 10

LOW

HIGH

VOX

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

MASTER

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

A121 MIXER AMPLIFIER 120W

AUX IN

SLAVE AMPLIFIER S121 Slave amplifier (see page 35) Item ref: 952.908

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

LOUDSPEAKERS | PS SERIES PENDANT SPEAKERS

PS SERIES WIDE DISPERSION PENDANT SPEAKERS Wide dispersion spheroid 2-way pendant speakers for use with high ceilings where regular ceiling speakers would be positioned too high to be efficient. Each has a rotary switch on top for selecting 100V line tappings and 8Ω operation. • Supplied with 1.3m cable and cable hook for hanging • Selector for 4 x 100V line tappings + 8Ω

Ω 140º DISPERSION

7.5 3.75 15 W W W

8 Ω

100V.Line

5 2.5 10 W W W

DOUBLE INSULATED

30 W

100V LINE

LOW IMPEDANCE

20 W

100V.Line

270mmØ 188mmØ

245mmØ 168mmØ

195mm

180mm

PS50

PS65

PS50-W

PS50-B

PS65-W

PS65-B

Item ref Finish Speaker size Dispersion angle Frequency response Power rms: 8Ω SPL @ 1W/1m Tappings Dimensions

952.426 White 125mmØ (5“) 140º 50Hz - 20kHz 20W 89dB 2.5W, 5W, 10W, 20W + 8Ω 180 x 245mmØ

952.427 Black 125mmØ (5“) 140º 50Hz - 20kHz 20W 89dB 2.5W, 5W, 10W, 20W + 8Ω 180 x 245mmØ

952.429 White 165mmØ (6.5“) 140º 40Hz - 20kHz 30W 88dB 3.75W, 7.5W, 15W, 30W + 8Ω 195 x 270mmØ

952.430 Black 165mmØ (6.5“) 140º 40Hz - 20kHz 30W 88dB 3.75W, 7.5W, 15W, 30W + 8Ω 195 x 270mmØ

Weight

2.366kg

2.916kg

MULTI-LEVEL PENDANT SPEAKER ARRAY

5 x HIGH LEVEL SPEAKERS PS-50W Pendant speakers (each tapped at 20W) Item ref: 952.426

AUDIO SOURCE M50 (see page 57) Item ref: 952.193

10 x LOW LEVEL SPEAKERS PS-50W Pendant speakers

AMPLIFIER A251 (see page 34)

(each tapped at 10W) Item ref: 952.426

Item ref: 952.906

T 09-8375020

EXAMPLE SET-UP

F 09-8375019

POWER OFF

MIC 1

MIC 2

0 10

LOW

HIGH

VOX

E info@surplustronics.co.nz

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

MASTER

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

A251 MIXER AMPLIFIER 250W

AUX IN

www.surplustronics.co.nz

IN-WALL SPEAKERS | LOUDSPEAKERS

WD SERIES IN-WALL DIRECTIONAL SPEAKERS These easy-fit rectangular in-wall speakers are ideal for main speakers, surround sound or remote speaker applications. With a 3 part design, the removable outer frame can be fitted independently of the speaker and grille for easy installation. The pivotal tweeter allows for the high frequencies to be focused in the direction of the listening area, this increases the flexibility when locating the speakers off-axis from the listeners. • Polypropylene woofer with rubber surround • Adjustable directional ferrofluid cooled silk swivel mount dome tweeters • High quality crossover

Ω LOW IMPEDANCE

GOLD PLATED

x2 140º DISPERSION

QTY SUPPLIED

W6D-P 952.922 160mmØ (6.25“) 25mmØ (1“)

60Hz - 20kHz 8Ω 140º 30W 155 x 240mm 90mm 89dB 190 x 272 x 90mm 1.4kg

50Hz - 20kHz 8Ω 140º 45W 186 x 273mm 90mm 89dB 220 x 305 x 90mm 1.8kg

190mm

305mm

W5D-P 952.919 133mmØ (5.25“) 25mmØ (1“)

272mm

Item ref Woofer Tweeter Frequency response Impedance Dispersion Power rms Cutout Mounting depth SPL @ 1W/1m Dimensions Weight

• Gold plated compression terminal posts • Fitted with “dog-ear” mounts • 3-position treble switch ±3dB

90mm 220mm

W5D-P

90mm

W6D-P

IW SERIES IN-WALL SPEAKER A 2-way speaker with a built-in crossover, woofer with polypropylene cone and foam rubber surround to minimise distortion. The housing is made from white ABS with a rigid steel grille also in white to sit discretely in a wall or ceiling.

LOW IMPEDANCE

165º DISPERSION

100.032 130mmØ (5“) 40mm (1.75”) 165º 100Hz - 17kHz 8Ω 50W 205 x 140mm 52mm 89dB 235 x 170 x 60mm 1.6kg

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

235mm

IW5 Item ref Woofer Tweeter Dispersion angle Frequency response Impedance Power max. Cutout Mounting depth SPL @ 1W/1m Dimensions Weight

205mm

• 2-way speaker • Poly-carbonate tweeter • Fitted with “dog-ear” mounts for quick installation • Fitted with attractive metal grille • Spring terminal connections

130mmØ

140mm

60mm

170mm

52mm Mounting depth

IW5

CORNER SPEAKERS | LOUDSPEAKERS

CB40V CORNER WALL-MOUNT BACKGROUND SPEAKERS A dual driver dispersion speaker in a curved ABS enclosure. 2 main drivers are set at a 50° angle and a silk dome tweeter disperses outward from the centre. Can be mounted in corners individually, mid-wall in pairs or suspended in fours for pendant-style arrays. Can also be mounted vertically. A versatile solution for background music and indoor public address.

• Wide lateral dispersion pattern • Supplied with discreet moulded mounting bracket • Full range, high quality reproduction • Tappings for 100V or 4Ω operation • Gold plated connectors

Ω LOW IMPEDANCE

GOLD

140º DISPERSION

140mm

100V LINE

265mm

PLATED

380mm

CB40V

CB40V-W

Compatible ceiling array bracket Item ref: 952.132 See page 27

Item ref Finish Woofer Tweeter Dispersion angle Frequency response Power rms SPL @ 1W/1m Tappings Dimensions Weight

952.130 White

WIDE COVERAGE CORNER AND PENDANT ARRAY SYSTEM

SPEAKERS 2 x CB40V-W (Tapped at 20W each) Item ref: 952.130

8 x CB40V-W (Tapped at 40W each) Item ref: 952.130

ARRAY BRACKETS

952.131 Black 2 x 90mm (3.5”) reinforced cones 25mm (1”) silk dome 140º 70Hz - 16kHz 40W 87dB (±3dB) 100V line, 5W, 10W, 20W, 40W & 4Ω 380 x 140 x 265mm 3.44kg

EXAMPLE SET-UP

AUDIO SOURCE AD-200 (see page 43) Item ref: 952.980

AMPLIFIER A60 (see page 36) Item ref: 952.970

(see page 27)

2 x SLAVE AMPS S240 (see page 37)

Item ref: 952.132

Item ref: 952.994

T 09-8375020

CB40V-B

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

LOUDSPEAKERS | CORNER SOUND PROJECTORS

CSP3V CORNER SOUND PROJECTOR Curved ABS sound projector with a main driver and a cone tweeter with horn flare. A detachable rear corner bracket facilitates easy fixing into corners and conceals cable entry point. Applications include background music and general indoor public address. Can be mounted in corners, as pairs or arrayed in sets of 4. • Wide dispersion corner mount design • Tappings for 100V or 8Ω operation • Full range output for background music • Supplied with discreet moulded mounting bracket

CSP3V-W CSP3V-B

Tappings Dimensions Weight

100V LINE

140º DISPERSION

Compatible ceiling array bracket Item ref: 952.138 See page 27

190mm

952.136 952.137 White Black 90mm (3.5”) 25mm (1”) 140º 160Hz - 20kHz 20W 88dB (±3dB) 100V line, 2.5W, 5W, 10W, 20W & 8Ω 190 x 250 x 146mm 1.57kg

250mm

Item ref Finish Woofer Tweeter Dispersion angle Frequency Power rms SPL @ 1W/1m

Ω LOW IMPEDANCE

146mm

CSP3V

NE W

BC4A ACTIVE SPEAKER SETS Stereo active speaker set comprising of an active speaker and a passive satellite contained in durable ABS cabinets and coated steel mesh grilles. Each unit is wall-mountable and powered via an external power adaptor. An easy and cost effective solution for background music, perimeter sound or small zone area. • Adjustable wall-mount brackets included • 3m satellite speaker wire supplied

BC4A-W

QTY SUPPLIED

175mm 155mm

BC4A-B

170.146 Black 18Vdc 1.0A adaptor (supplied) 100mmØ (4”) PP cone 25mm (1”) balanced dome 150° (-3dB) 120Hz - 20kHz 2 x 8W Combined On/Off + volume rotary 3.5mm stereo and L+R RCA 155 x 220 x 148mm 2.79kg

220mm

Item ref 170.145 Finish White Power supply Woofer Tweeter Dispersion Freq response Power rms Controls Input connections Dimensions (each) Weight (per set)

x2 150º DISPERSION

148mm

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

BC4A

STEREO SPEAKERS | LOUDSPEAKERS

BC5A ACTIVE BACKGROUND SPEAKERS 2-way active monitor speaker set comprising a powered unit with stereo amp module and a satellite passive unit. Designed for nearfield monitoring, home entertainment or as a small active background music system. • Magnetically shielded • Supplied with RCA input lead and speaker link cable • Fig.8 mains lead included • Supplied with mounting brackets x2 145º DISPERSION

QTY SUPPLIED

BC5A-S 170.164 Silver

BC5A-B

175mm 155mm

170.165 170.166 White Black 230Vac, 50Hz 135mmØ (5.25”) PP cone 25mm (1”) balanced dome 145° 60Hz - 20kHz 30W 89dB 240 x 180 x 155mm 4.6kg

240mm

Item ref Finish Power supply Woofer Tweeter Dispersion Freq response Power rms SPL @ 1W/1m Dimensions Weight

BC5A-W

180mm

BC5A

WPS SERIES INDOOR/OUTDOOR SPEAKERS These two-way, weather resistant speakers are suitable for indoor and outdoor applications. These speakers will excel as a straightforward stereo pair, for multimedia or as part of a surround sound system. Despite their compact size, these speakers can deliver a full sounding output. Supplied with wall-mount brackets. • Polypropylene housing with aluminium grille • Polypropylene woofer

Ω LOW IMPEDANCE

140º DISPERSION

Item ref Woofer

Weight

PLATED

WPS4

WPS5

952.518 100mmØ (4”) 20mm (0.75”) 80Hz - 20kHz 8Ω 30W 88dB IP35 135 x 205 x 136mm 1.4kg

952.521 133mmØ (5.25”) 20mm (0.75”) 50Hz - 20kHz 8Ω 35W 89dB IP35 163 x 239 x 160mm 1.9kg

T 09-8375020

x2 QTY SUPPLIED

F 09-8375019

163mm 136mm

239mm

Dimensions

GOLD IP35

205mm

Tweeter Freq response Impedance Power rms SPL @ 1W/1m IP rating

• F luid cooled polycarbonate tweeter •G old-plated compression terminal posts

135mm

160mm

WPS4

E info@surplustronics.co.nz

WPS5

www.surplustronics.co.nz

LOUDSPEAKERS | LOW IMPEDANCE BACKGROUND SPEAKERS

FC SERIES FC-SERIES COMPACT BACKGROUND SPEAKERS 2-way compact speakers with weatherproof moulded cabinets, designed for convenient and discreet background music installation in bars and leisure venues.

• 2-way speaker system with crossover network • UV protected ASTM D4329 • Indoor/outdoor equalisation switch • Gold plated spring terminal connections • Mounting bracket included • Optional mounting by M6 screw sockets

155mm 110.5mm

200.5mm

150.5mm 270° pivot

FC4

Ω LOW IMPEDANCE

145º DISPERSION

IP44

FC4-W

FC4-B

100.960 100.963 White Black 100mmØ (4”) PP cone 13mm (0.5”) PEI dome IP44 125Hz - 20kHz 8Ω 20W 88dB 200.5 x 150.5 x 155mm 1.15kg

GOLD PLATED

FC5-W

x2 QTY SUPPLIED

180mm 140mm

FC5-B

100.967 100.965 White Black 133mmØ (5.25”) PP cone 13mm (0.5”) PEI dome IP44 76Hz - 20kHz 8Ω 50W 89dB 245 x 185 x 180mm 2.22kg

245mm

Item ref Finish Woofer Tweeter IP rating Freq response Impedance Power rms SPL @ 1W/1m Dimensions Weight

DOUBLE INSULATED

185mm 270° pivot

FC5

MULTI-ZONE BACKGROUND MUSIC SYSTEM

10 x SPEAKERS (wired in parallel pairs at 4Ω)

FC5-B Item ref: 952.965

AUDIO SOURCES AD-200 (see page 43)

ZONING MIXER Z5M (see page 39) Item ref: 953.019

AD-100 (see page 43)

ZONE AMPLIFIER A5X60 (see page 42)

Item ref: 952.979

Item ref: 952.992

Item ref: 952.980

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

EXAMPLE SET-UP

100V LINE BACKGROUND SPEAKERS | LOUDSPEAKERS

FCV SERIES 100V LINE COMPACT BACKGROUND SPEAKERS 2-way compact speakers with weatherproof moulded cabinets, making them ideal for gardens, outdoor shelters, health club spa areas and marine applications.

• 2-way speaker system with crossover network • Rotary selector switch for 100V line tappings or 8Ω operation • UV protected ASTM D4329 • Indoor/outdoor equalisation switch • Gold plated spring terminal connections • Mounting bracket included • Optional mounting by M6 screw sockets

155mm 110.5mm

200.5mm

150.5mm 270° pivot

FC4V

145º DISPERSION

100V LINE

IP44

FC4V-W

FC4V-B

952.962 952.964 White Black 100mmØ (4”) PP cone 13mm (0.5”) PEI dome IP44 131Hz - 20kHz 20W 87dB 2.5W, 5W, 10W, 20W 200.5 x 150.5 x 155mm 1.36kg

GOLD PLATED

FC5V-W

x1 QTY SUPPLIED

180mm 140mm

FC5V-B

952.965 952.960 White Black 133mmØ (5.25”) PP cone 13mm (0.5”) PEI dome IP44 80Hz - 20kHz 50W 88dB 5W, 10W, 20W, 40W 245 x 185 x 180mm 2.7kg

245mm

Item ref Finish Woofer Tweeter IP rating Freq response Power rms SPL @ 1W/1m Tappings Dimensions Weight

DOUBLE INSULATED

185mm 270° pivot

FC5V

10 SPEAKER MUSIC & PUBLIC ADDRESS SYSTEM

EXAMPLE SET-UP

10 x SPEAKERS (tapped at 20W)

FC4V-W Item ref: 952.962

AUDIO SOURCE M49 (see page 57) Item ref: 952.190

AMPLIFIER A251 (see page 34) Item ref: 952.906 POWER OFF

MIC 1

T 09-8375020

F 09-8375019

E info@surplustronics.co.nz

MIC 2

0 10

LOW

HIGH

VOX

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

MASTER

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

A251 MIXER AMPLIFIER 250W

AUX IN

www.surplustronics.co.nz

LOUDSPEAKERS | STEREO BACKGROUND SPEAKERS

BC SERIES PASSIVE BACKGROUND SPEAKERS A range of compact 2-way stereo speakers, with ABS enclosures and sturdy metal grilles. Suitable for free standing or wall mounting via adjustable fixing bracket. The trapezoidal design allows for the enclosures to be mounted neatly into corners, making them ideal for Hi-Fi and surround sound applications. • Features a polypropylene woofer • Complete with mounting brackets • Optional mounting by M6 screw sockets • Gold-plated spring terminal connectors • Note: Connecting leads not supplied

Ω LOW IMPEDANCE

145º DISPERSION

DOUBLE INSULATED

BC3W Item ref Finish Woofer Tweeter Frequency response Impedance Power rms SPL @ 1W/1m Dimensions (each) Weight (each)

GOLD PLATED

BC3B

100.898 100.899 White Black 75mmØ (3“) 50mmØ (2“) Polymer HF unit 120Hz - 20kHz 8Ω 30W 88dB 106 x 153 x 98mm 840g

270º pivot

QTY SUPPLIED

BC4W

BC4B

100.901 100.902 White Black 100mmØ (4”) 25mmØ (1”) balanced dome 110Hz - 20kHz 8Ω 35W 88dB 195 x 150 x 150mm 1.25kg

BC5W

BC5B

100.904 100.905 White Black 130mmØ (5.25”) 25mmØ (1”) balanced dome 100Hz - 20kHz 8Ω 45W 88dB 235 x 180 x 175mm 2.0kg

BC6W

BC6B

100.907 100.908 White Black 165mmØ (6.5”) 25mmØ (1”) silk dome 80Hz - 20kHz 8Ω 60W 89dB 280 x 220 x 210mm 2.5kg

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

BC8W

BC8B

100.910 100.911 White Black 200mmØ (8”) 25mmØ (1”) silk dome 50Hz - 20kHz 8Ω 90W 89dB 280 x 374 x 257mm 5.26kg

100V INDOOR SPEAKERS | LOUDSPEAKERS

W NE

BCV SERIES 100V INDOOR SPEAKERS A range of indoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for free standing or wall mounting via adjustable fixing bracket. The trapezoidal design allows for the enclosures to be mounted neatly into corners, making them ideal for most applications

• 2 way speaker system with crossover network • Rotary selector switch for 100V line tappings or 8Ω operation • Wall mounting bracket supplied • Alternative M6 threaded mounting points • Spring terminal connection • Supplied singly

Ω 100V LINE

LOW IMPEDANCE

145º DISPERSION

BC3V-W Item ref Finish Woofer Tweeter Frequency response Power max: 8Ω Power rms: 8Ω SPL @ 1W/1m Tappings Dimensions (each) Weight (each)

GOLD

DOUBLE INSULATED

PLATED

BC3V-B

952.710 White

952.711 Black 75mmØ (3“) 12mmØ (0.5“) Polymer HF unit 120Hz - 20kHz 60W 30W 87dB 1.5W, 3W, 6W & 8Ω 106 x 153 x 98mm 900g

270º pivot

QTY SUPPLIED

BC4V-W 952.712 White

BC4V-B

952.713 Black 100mmØ (4”) 25mmØ (1”) balanced dome 110Hz - 20kHz 70W 35W 88dB 2.5W, 5W, 10W, 20W & 8Ω 150 x 195 x 150mm 1.63kg

BC5V-W

BC5V-B

952.714 952.715 White Black 130mmØ (5.25”) 25mmØ (1”) balanced dome 100Hz - 20kHz 90W 45W 89dB 5W, 10W, 20W, 30W & 8Ω 180 x 235 x 175mm 2.38kg

BC6V-W

BC6V-B

952.716 White

952.717 Black 165mmØ (6.5”) 25mmØ (1”) balanced dome 90Hz - 20kHz 120W 60W 89dB 5W, 10W, 20W, 40W & 8Ω 220 x 280 x 210mm 3.08kg 257mm 237mm

210mm 190mm

374mm

280mm

220mm 280mm

BC6 / BC6V / BP6

T 09-8375020

F 09-8375019

BC8

E info@surplustronics.co.nz

www.surplustronics.co.nz

LOUDSPEAKERS | 100V BACKGROUND SPEAKERS

W NE

BPV SERIES 100V WEATHERPROOF SPEAKERS A range of indoor/outdoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for wall mounting via adjustable fixing bracket. Weatherproof design makes these speakers ideal for outdoor music and public address applications.

• Water resistant PP cone main driver • Rotary selector switch for 100V line tappings or 8Ω operation • Wall mounting bracket supplied • Alternative M6 threaded mounting points • 1m hard-wired speaker cable connected • Supplied singly

Ω 100V LINE

LOW IMPEDANCE

IP54

DOUBLE INSULATED

145º DISPERSION

GOLD PLATED

BP3V-W Item ref Finish Woofer Tweeter Frequency response Power max: 8Ω Power rms: 8Ω SPL @ 1W/1m Tappings Dimensions (each) Weight (each)

270º pivot

QTY SUPPLIED

BP3V-B

952.810 White

952.811 Black 75mmØ (3“) 12mmØ (0.5“) Polymer HF unit 120Hz - 20kHz 60W 30W 87dB 1.5W, 3W, 6W & 8Ω 106 x 153 x 98mm 900g

BP4V-W

BP4V-B

952.812 White

BP5V-W

952.813 Black 100mmØ (4”) 25mmØ (1”) balanced dome 110Hz - 20kHz 70W 35W 88dB 2.5W, 5W, 10W, 20W & 8Ω 150 x 195 x 150mm 1.63kg

BP5V-B

952.814 952.815 White Black 130mmØ (5.25”) 25mmØ (1”) balanced dome 100Hz - 20kHz 90W 45W 89dB 5W, 10W, 20W, 30W & 8Ω 180 x 235 x 175mm 2.38kg

OUTDOOR SHELTER ARRAY WITH VARIED OUTPUT LEVELS Item ref: 952.815

AUDIO SOURCE M49 (see page 57) Item ref: 952.190 Tapped at 5W

Tapped at 30W

Tapped at 10W

Tapped at 20W

BP6V-B

952.816 White

952.817 Black 165mmØ (6.5”) 25mmØ (1”) balanced dome 90Hz - 20kHz 120W 60W 89dB 5W, 10W, 20W, 40W & 8Ω 220 x 280 x 210mm 3.08kg

EXAMPLE SET-UP

5 x SPEAKERS BP5V-B

AMPLIFIER A120 (see page36)

BP6V-W

Tapped at 30W

Item ref: 952.973

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

100V BACKGROUND SPEAKERS | LOUDSPEAKERS

FSV SERIES 100V LINE HIGH PERFORMANCE BACKGROUND SPEAKERS High quality 2-way speakers for indoor or outdoor use. The speaker cabinet makes them ideal for outdoor events, swimming pools, garden areas and marine or boat use. • 2 way speaker system with crossover network • Rotary selector switch for 100V line tappings or 8Ω operation • UV protected ASTM D4329

• Indoor/outdoor equalisation switch • Gold plated binding posts • Mounting bracket • Optional mounting by M6 screw sockets

Ω 100V LINE

LOW IMPEDANCE

145º DISPERSION

GOLD

DOUBLE INSULATED

IP35

PLATED

x1 QTY SUPPLIED

FSV-W

186mm

FSV-B

Item ref 952.961 952.963 Finish White Black Woofer 133mmØ (5.25”) Tweeter 13mmØ (0.5”) Dispersion angle 145º IP rating IP35 Frequency response 125Hz - 20kHz Power rms @ 8Ω 65W SPL @ 1W/1m 88dB

142mm

252mm

177mm

Tappings Dimensions Weight

FSV

5W, 10W, 20W, 40W & 8Ω 252 x 177 x 142mm 3.06kg

C25V MINI BACKGROUND SPEAKERS A pair of background speakers in a compact moulded enclosure for 100V or 8Ω operation. Ideal for surround sound and discreet installations in combination with a sub cabinet. • Adjustable wall brackets supplied • 100V or 8Ω operation

Ω 100V LINE

LOW IMPEDANCE

130º DISPERSION

QTY SUPPLIED

89mm

90mm

111mm

C25V

T 09-8375020

F 09-8375019

C25V-W Item ref Finish Woofer Frequency response Power max. @ 8Ω Power rms @ 8Ω Power rms @ 100V line SPL @ 1W/1m Dimensions Weight

E info@surplustronics.co.nz

C25V-B

952.820 952.821 White Black 65mmØ (2.5”) reinforced paper cone 150Hz - 22kHz 30W 15W 6W 88dB 89 x 111 x 90mm 465g

www.surplustronics.co.nz

LOUDSPEAKERS | BACKGROUND SPEAKERS

W NE

B30V 100V LINE BACKGROUND SPEAKERS A powerful 3-way speaker set for surround and monitoring applications. Fitted with a rotary switch for 4 x 100V line tappings or 8Ω operation. • S upplied in pairs with mounting brackets for horizontal or vertical use •3 -way speaker design with bass reflex

Ω 100V LINE

LOW IMPEDANCE

150º DISPERSION

DOUBLE INSULATED

QTY SUPPLIED

150mm 130mm

B30V-B

B30V-W

140mm

B30V

WSP25 SOUND PROJECTORS Weatherproof sound projector speakers suitable for indoor and outdoor use. Made from robust plastic and fitted with a strong metal mounting bracket. Fitted with a quality speaker and a transformer controlled by a rotary switch for 100V line tappings or 8Ω operation. • I deal for garage forecourts, swimming pools, gardens etc

Ω 100V LINE

LOW IMPEDANCE

90º DISPERSION

WSP25-B

IPX5

WSP25-C

952.941 952.959 Black Cream 138mmØ (5.5”) IPX5 50Hz - 10kHz 25W @ 8Ω 105dB 2W, 4W, 8W, 16W & 8Ω 267 x 176mmØ 2.6kg

176mm

Item ref Finish Speaker size IP rating Freq response Power rms SPL @ 1W/1m Tappings Dimensions Weight

DOUBLE INSULATED

267mm

WSP25

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

240mm

210mm

Item ref 952.887 952.888 Finish Black White Power handling 60W max. Woofer 100mm (4”) PP cone Mid driver 50mmØ (2”) PP cone Tweeter 13mm (0.5”) dome Freq response 120Hz-20KHz Sensitivity 87dB Tappings 5W, 10W, 20W, 30W & 8Ω Dimensions (each) 136 x 240 x 155mm Weight (per set) 3.26kg

COLUMN SPEAKERS | LOUDSPEAKERS

HC SERIES

SC SERIES

HEAVY-DUTY COLUMN SPEAKERS

SLIMLINE COLUMN SPEAKERS

Heavy-duty column speakers suitable for indoor and outdoor use. The extruded aluminium casings with cast aluminium end plates are fully dust and weatherproof.

Slimline column speakers suitable for indoor applications, especially where discretion is a necessity. Made from extruded aluminium with a white protective finish, fitted with white metal grilles and white plastic end caps. Fitted with high quality speakers providing crisp, clear sound reproduction and a 100V line transformer.

Fitted with high quality elliptical speakers and a 100V line transformer. • Fitted with a length of connecting cable • Supplied with strong mounting brackets • Integral rotary switch for tapping selection

100V LINE

110º DISPERSION

• Supplied with mounting brackets • Integral rotary switch for tapping selection

DOUBLE INSULATED

IP65 100V LINE

HC15-V

HC30-V

Item ref Speaker size IP rating Freq response Power rms SPL @ 1W/1m

952.170 2 x 150 x 100mm (6 x 4”) IP65 150Hz - 10kHz 15W 94dB

952.173 4 x 150 x 100mm (6 x 4”) IP65 150Hz - 10kHz 30W 97dB

Impedance

670, 1k, 2k, 4kΩ

Tappings Dimensions Weight

2.5W, 5W, 10W, 15W 450 x 150 x 130mm 4.5kg

T 09-8375020

110º DISPERSION

DOUBLE INSULATED

SC12-V

SC20-V

Item ref Speaker size Freq response Power rms SPL @ 1W/1m

952.240 4 x 63mmØ (2.5”) 250Hz - 16kHz 12W 94dB

952.242 7 x 63mmØ (2.5”) 250Hz - 16kHz 20W 94dB

333, 500, 1k, 2kΩ

Impedance

883, 1.66, 3.3, 6.6kΩ

500, 1k, 2k, 4kΩ

5W, 10W, 20W, 30W 890 x 150 x 130mm 7kg

Tappings Dimensions Weight

1.5W, 3W, 6W, 12W 406 x 105 x 75mm 2.2kg

2.5W, 5W, 10W, 20W 620 x 105 x 75mm 3.6kg

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

LOUDSPEAKERS | SPEAKER BRACKETS W NE

UNIVERSAL SPEAKER BRACKETS

These universal speaker wall mounts are designed to work with all types of small home cinema and surround sound satellite speakers. The brackets can swivel left and right and tilt up or down allowing for optimum positioning.

SWIVEL SPEAKER BRACKETS A range of universal easily adjustable speaker wall brackets. Once your speaker is fitted to the bracket, you can use the brackets ball and socket joint to rotate it 360° in the vertical plane and up to 90° in the horizontal. When your speaker is set up at the exact angle that you want for it, simply tighten the bolt to safely lock it into place.

3.5kg

x2 QTY SUPPLIED 51mm

Finish Wallplate fixing centres Max load Mounting dimensions Weight

58.2mm

QTY SUPPLIED

Small

129.130

129.207

129.208

Black 62mm 3.5kg 72 x 38 x 42mm 177g

White 62mm 3.5kg 72 x 38 x 42mm 177g

Finish Size Tilt Range Max load Swivel Dimensions Weight

White

48mm

41mm

Supplied with 3 sizes of swivel arms: 85mm right angled 50mm right angled 20mm straight

31.6mm

39mm

61mm

Max. weight load

78.2mm

Large

129.131

Black Small 43° 1.61kg 43° 48 x 58.2mmØ 600g

129.133 White

129.134

Black Large 37° 3.03kg 37° 61 x 78.5mmØ 800g

ADJUSTABLE SPEAKER BRACKETS

Adjustable speaker brackets for wall or ceiling mounting.

• Adjustable in 180° plane with swivel mount plate

• Multi-directional ball joint mount • Strong metal construction

Max. weight load

5kg

• Strong metal construction • Safety cable supplied

Max. weight load

QTY SUPPLIED

5kg

• Safety cable supplied

x2 QTY SUPPLIED

103.012

103.015

Speaker fixing centres

64mm & 72 x 35mm

Speaker fixing centres

70-80mm

Wallplate fixing centres

87.5 x 82mm

Wallplate fixing centres

87.5 x 82mm

Max. weight load (each) Dimensions (each) Weight (each)

5kg 105 x 100 x 115mm 125g

Max. weight load (each) Dimensions (each) Weight (each)

5kg 105 x 100 x 115mm 125g

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

SPEAKER BRACKETS | LOUDSPEAKERS

CB404 CEILING ARRAY BRACKETS

144m

100m

230mm

Pair of mounting brackets for suspending from a ceiling to hold 4 Adastra CB40V corner speakers on each.

Fixing plate and drop pole included or can be suspended from 10mm threaded rod. • Ideal solution for central clusters

140mm

Max. weight load

13.76kg

x2 QTY SUPPLIED

32mm

CB40V speakers can be found on page 15

32mm

952.132 144 x 100mm

Pole size

M10 x 230mm

Max. weight load (each) Dimensions (each) Weight (each)

13.76kg 144 x 353 x 100mm 549g

M10 x 230mm

32mm

CB404 Item ref Plate size

2.5mm

CB404

CSP34

144m

100m

CEILING ARRAY BRACKETS 230mm

Pair of mounting brackets for suspending from a ceiling to hold 4 Adastra CSP3V corner sound projectors on each. Fixing plate and drop pole included or can be suspended from 10mm threaded rod. • Ideal solution for central clusters

228mm

Max. weight load

6.28kg

x2 QTY SUPPLIED

CSP3V speakers can be found on page 16

32mm

CSP34 952.138 144 x 100mm

Pole size

M10 x 230mm

Max. weight load (each) Dimensions (each) Weight (each)

6.28kg 144 x 435 x 100mm 634g

T 09-8375020

F 09-8375019

32mm M10 x 230mm

32mm

Item ref Plate size

2.5mm

CSP34

E info@surplustronics.co.nz

www.surplustronics.co.nz

LOUDSPEAKERS | HORNS

CRH15 CAR ROOF HORN SPEAKER A horn speaker designed for car rooftop installation. Ideal for election campaigns and promotions. • Plastic, rectangular horn • Metal mounting bracket with rubber suction pad for easy fitting • Weatherproof • 800mm connection lead

CRH15

LOW IMPEDANCE

Item ref IP rating Freq response Power rms SPL @ 1W/1m

952.306 IP66 400Hz - 8kHz 30W 102dB

Impedance Dimensions Weight

8Ω 234 x 126 x 235mm 1.6kg

Compatible vehicle amplifier Item ref: 952.419 See page 42

IP66

VEHICLE AMPLIFIER

MIC

120º DISPERSION

AUX

POWER

SIREN

MIC

AUX

CH SERIES LOW IMPEDANCE HORNS An all metal range of low impedance round PA horns for general purpose and contract industrial installations. Made from aluminium and fitted with sturdy steel adjustable mounting brackets and a length of good quality two core speaker cable.

Ω LOW IMPEDANCE

125º DISPERSION

CH15

CH25

CH40

Item ref Frequency response Power rms SPL @ 1W/1m

952.237 300Hz - 8kHz 15W 100dB

952.234 300Hz - 8kHz 25W 107dB

952.231 250Hz - 6kHz 40W 106dB

Impedance Dimensions Weight

8Ω 200 x 210mmØ 850g

8Ω 245 x 255mmØ 1.1kg

8Ω 288 x 305mmØ 1.9kg

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

HORNS | LOUDSPEAKERS

FRH50 FULL RANGE HORN SPEAKER ABS full range horn speaker housed in a weatherproof, UV stabalised polymer enclosure. Unlike standard outdoor horn speakers, this powerful unit has a full range output and is therefore suitable for background music as well as public address. • Full range music quality output • Long throw coverage

100V LINE

90º DISPERSION

IP65

FRH50 Item ref LF driver HF driver IP rating Frequency response Power max.

FRH50

952.065 165mmØ (6.5”) reverse woofer 25mm (1”) phenolic dome tweeter IP65 90Hz - 20kHz 50W

Power rms SPL @ 1W/1m

30W 99dB (±3dB)

Tappings Dimensions Weight

3.75W, 7.5W, 15W, 30W 355 x 255 x 370mm 3.56kg

RH SERIES HEAVY DUTY RECTANGULAR HORN SPEAKERS A range of heavy duty, high quality rectangular PA horn speakers. Made from robust ABS material offering maximum protection against shock and weather. Ideal for mounting in extreme conditions (eg: on vehicles, boats or in exposed outdoor installations). 100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.

100V LINE

130º DISPERSION

• 270° adjustable mounting bracket • Supplied with 600mm double insulated connecting cable • Fitted with high quality aluminium voice coils

IP66

RH15

RH15V

RH25V

RH40V

Item ref IP rating Frequency response Power max. Power rms SPL @ 1W/1m

952.095 IP66 275Hz - 7kHz (±3dB) 23W 15W 106dB

952.098 IP66 275Hz - 7kHz (±3dB) 23W 15W 106dB

952.101 IP66 250Hz - 10kHz (±3dB) 38W 25W 108dB

952.248 IP66 180Hz - 7kHz (±3dB) 60W 40W 112.5dB

Impedance

8Ω

670, 1k, 2k, 4kΩ

400, 500, 670, 1k, 2kΩ

250, 330, 400, 500, 1k, 2kΩ

Tappings Dimensions Weight

250 x 145 x 270mm 1.52kg

15W, 10W, 5W, 2.5W 250 x 145 x 290mm 1.88kg

25W, 20W, 15W, 10W, 5W 300 x 180 x 315mm 2.44kg

40W, 30W, 20W, 15W, 10W, 5W 400 x 200 x 420mm 3.9kg

T 09-8375020

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

LOUDSPEAKERS | HORNS

HCH SERIES HEAVY DUTY ROUND HORN SPEAKERS A range of heavy duty, high quality rectangular PA horn speakers. Made from robust ABS material offering maximum protection against shock and weather. Ideal for mounting in extreme conditions (eg: on vehicles, boats or in exposed outdoor installations).

100V LINE

100º DISPERSION

100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.

• 270° adjustable mounting bracket • Supplied with 600mm double insulated connecting cable • Fitted with high quality aluminium voice coils

IP66

Item ref IP rating Frequency response Power max. Power rms SPL @ 1W/1m

HCH15

HCH15V

HCH20V

HCH25V

952.079 IP66 275Hz - 7kHz (±3dB) 23W 15W 106dB

952.082 IP66 275Hz - 7kHz (±3dB) 23W 15W 106dB

952.085 IP66 250Hz - 10kHz (±3dB) 38W 25W 108dB

952.088 IP66 240Hz - 10kHz (±3dB) 45W 30W 108dB

Impedance

8Ω

670, 1k, 2k, 4kΩ

400, 500, 670, 1k, 2kΩ

330, 400, 500, 670, 1k, 2kΩ

Tappings Dimensions

240 x 205mmØ

15W, 10W, 5W, 2.5W 273 x 205mmØ

25W, 20W, 15W, 5W 310 x 270mmØ

30W, 25W, 20W, 15W, 5W 315 x 310mmØ

Weight

1.42kg

1.78kg

2.34kg

2.39kg

EH SERIES RECTANGULAR HORN SPEAKERS A range of 100V line PA horn speakers ideal for general purpose and standard industrial installations. Fitted with high performance 100V line matching transformers and supplied with a length of 2 core double insulated cable. • Made from durable ABS plastic • Fitted with an adjustable steel mounting bracket • Wattage tappings selectable via integral rotary switch

100V LINE

120º DISPERSION

Item ref IP rating Frequency response Power rms SPL @ 1W/1m

IP56

EH12V

EH30V

952.245 IP56 280Hz - 12kHz 15W 108dB

952.246 IP56 250Hz - 14kHz 30W 109dB 330, 670, 1k, 2k, 3.3k, 10kΩ

Impedance

670, 1k, 2k, 3.3k, 10kΩ

Tappings Dimensions

15W, 10W, 5W, 3W, 1W 30W, 15W, 10W, 5W, 3W, 1W 224 x 160 x 230mm 290 x 210 x 260mm

Weight

1.5kg

1.9kg

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

AMPLIFIERS | INTRODUCTION

Amplifiers & Mixers Adastra 100V mixer-amplifiers form the heart of any professional audio installation and are available in various output powers and configurations. Coupled with complimentary sound sources, slave amplifiers, distribution mixers and induction loop drivers; these units form the modular building blocks with which to drive a virtually limitless variety of speaker units and build systems specifically suited to almost any commercial application.

Mixer and Slave Amplifiers CH-2

CH-1

CH-4

CH-3

CH-5

CH-6

A126 MIXER AMPLIFIER 120W

Adastra’s wide range of amplifiers, from compact to 19” rack mountable, are suitable for a variety of applications including bars, fitness studios and live PA. A range of slave amplifiers have also been designed to complement each series of mixer amplifiers to enable extended, large-scale systems to be designed. Pages 33 - 38

48V

MIC/LINE 1

MIC/LINE 2

LEVEL

LINE 3

LEVEL

GAIN

REVERB

LINE 4

LEVEL

OUT 1

OUT 2

OUT 3

TIME

LINE 3

OFF

MIC 1

MID

IN A IN B

Zoning Mixers and Amplifiers

OUT 4

LEVEL

GAIN

DEPTH

LINE 4

Z44R

Adastra zoning mixers and amplifiers offer innovative solutions for multi-zone installation and audio routing systems. Each item has been carefully designed to address a wide range of applications and is built to Adastra’s exacting standards to give long term, reliable service and simplicity of use. Pages 39 - 42

DIRECT TRACK ACCESS

OFF

REMOTE SENSOR

USB

AD-200 MULTIMEDIA AUDIO PLAYER

EJECT

PLAY/PAUSE

STOP

+10

MUTE

PROG

FOLDER SKIP

SOURCE

MODE

PITCH

Sound Sources These fully featured multimedia units can be used to extend your system with products boasting CD/DVD players, USB media players and FM tuners.

CD/USB/SD

Pages 42 - 43

LA-600 INDUCTION LOOP AMPLIFIER INPUTS

PEAK CURRENT

MASTER

SIREN 0

CH 1

CH 2

CH 3

-10

+10

BASS

-10

+10

TREBLE

LOOP CURRENT

POWER

Induction Loop Systems These specialist sound source products are an essential feature for all modern PA installations. Adastra’s induction loop equipment is the ideal solution to allow equal access to information and announcements for hearing aid users. Pages 44 - 45

Icon Guide

Ω 100V LINE

100V Line

T 09-8375020

F 09-8375019

LOW IMPEDANCE

19” rack mountable

+48V PHANTOM POWER

Low impedance

19” rack mountable

+48V Phantom power

E info@surplustronics.co.nz

www.surplustronics.co.nz

A SERIES MIXER AMPLIFIERS | S SERIES SLAVE AMPLIFIER | AMPLIFIERS

A SERIES 3 CHANNEL MIXER AMPLIFIERS Compact PA amplifiers offering a range of comprehensive features, excellent performance and reliability for use in a wide variety of small to medium installations. The A25 offers an unbalanced mic input and switched VOX priority on channel 1, selectable mic/aux on channel 2 and line input on channel 3. The A50 offers a balanced microphone input with switched VOX priority and mic/telephone selection on Channel 1, aux/mic input option on Channel 2.

Item ref Frequency response Input impedance: Aux/Line Input impedance: Mic 1/Tel Input impedance: Mic2 Input sensitivity: Aux Input sensitivity: Line Input sensitivity: Tel Output power Output : 1% THD Output : 10% THD Output : Line Outputs : Speaker Power : Battery Power : Mains Signal to noise ratio: Mic1, Mic 2 Signal to noise ratio: Tel/Aux/Line Dimensions Weight

A25

A50

952.931 100Hz - 10kHz (±3dB) 10kΩ 2kΩ 3kΩ 300mV 300mV N/A 25Wrms 24W 32W 1V @ 600Ω 8Ω & 100V 12Vdc (5A) 240Vac, 50Hz (85VA)

952.934 100Hz - 10kHz (±3dB) 10kΩ 3kΩ 3kΩ 300mV 300mV 500mV 50Wrms 45W 60W 1V @ 600Ω 8Ω & 100V 12Vdc (8A) 240Vac, 50Hz (135VA)

-65dB

65dB

-75dB

270 x 85.5 x 218mm 3.9kg

270 x 85.5 x 218mm 4.5kg

• VOX priority on channel 1 • Channel 2 selectable mic (unbalanced) /aux input • Channel 3 line input (RCA phono L&R) • 8Ω and 100V line outputs • Master, bass and treble controls • Mains/battery operation

110V~60Hz

240V~50Hz CH3

12Vdc

COM

8Ω

100V

LOW IMPEDANCE

100V LINE

A25 OFF

VOX

MIC 1

MASTER

MIC 2/AUX

LINE

BASS

POWER

TREBLE

A50 OFF

MIC

VOX

TEL

-9 -6 -3 -1 0 +1 +3 ON

MIC 1

MIC 2/AUX

FOG

SIREN ALERT

LINE

MASTER

BASS

POWER

TREBLE

240V~50Hz

WARNING!

COMPACT SLAVE AMPLIFIER

ELECTRIC SHOCK HAZARD. DO NOT OPEN. THIS EQUIPMENT MUST BE EARTHED. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DO NOT EXPOSE TO RAIN OR MOISTURE. REPLACE MAINS FUSE ONLY WITH CORRECT TYPE AND RATING. DO NOT OBSTRUCT VENTILATION SLOTS.

12Vdc

T1A/250V COM

A compact slave (booster) amplifier designed to complement the Adastra A Series compact mixer amplifiers in styling and size. Also for use with other models of mixer amplifiers.

952.938 12Vdc (8A) 240Vac, 50Hz (135VA) 100Hz - 10kHz (±3dB) 10kΩ 300mV 50Wrms 45W 60W 1V @ 600Ω 8Ω & 100V -65dB -75dB 270 x 85.5 x 218mm 4.5kg

SLAVE OUT

110~60Hz

Item ref Power : Battery Power : Mains Frequency response Input impedance : Aux/Line Input sensitivity : Line Output power Output : 1% THD Output : 10% T.H.D Output : Line Outputs : Speaker Signal to noise ratio: Mic1, Mic2 Signal to noise ratio: Tel/Aux/Line Dimensions Weight

MIC AUX

WARNING!

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

T0.5A/250V T1A/110V

A25 & A50 rear panel

S SERIES

S50

CH2 L

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

SLAVE OUT

100V

S50 rear panel

• Master volume control • 8Ω and 100V line outputs • RCA phono input and output • Mains/battery operation

S50

8Ω

SLAVE IN

Ω 100V LINE

MASTER

POWER

LOW IMPEDANCE

AMPLIFIERS | A SERIES 1U 100V MIXER AMPLIFIERS W NE

A SERIES 1U 100V MIXER AMPLIFIER WITH USB/FM PLAYER Compact mixer amplifier with 2 Mic inputs, 2 Line inputs and integral USB digital audio player suitable for many varied applications including bars, fitness studios, restaurants and live PA.

•M ic channels 2-band EQ, Line channels 2-band EQ • S witchable +32V phantom power (Mic 1) • S oft-knee output limiter •M ulti-speed cooling fans

• Integral USB digtal audio player with FM tuner • Choice of 4Ω min. or 100V line output • Adjustable Mic 1 Vox priority function • 3.5mm Aux in option on front panel

Mic and line channels have shared Lo/Hi EQ and Mic 1 has adjustable Vox priority. Phantom power is provided on channel 1 for condenser microphones.

LOW IMPEDANCE

100V LINE

19” rack mountable

POWER OFF

MIC 1

MIC 2

0 10

LOW

HIGH

VOX

LINE 1

USB

0 10

LINE 2 USB/FM/AUX LOW

HIGH

MIN

MAX

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

ON AUX IN

A121 MIXER AMPLIFIER 120W

MASTER

POWER OFF

MIC 1

MAINS 220-250Vac 50/60Hz

MIC 2

0 10

LOW

HIGH

VOX

CAUTION DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK. DO NOT EXPOSE TO RAIN OR MOISTURE

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

ON AUX IN

A251 MIXER AMPLIFIER 250W

MASTER

SPEAKERS

INPUTS DO NOT OBSTRUCT COOLING FANS

VOLTAGE SELECTOR

OFF

ANTENNA 110V-60Hz

240V-50Hz

4 - 16Ω

100V

USE EITHER JACK OR 100V OUTPUT DO NOT USE JACK AND 100V OUTPUT TOGETHER

OUTPUT

FUSE T3.15A

LINE 2

LINE 1

MIC 2 (BAL)

MIC 1 (BAL)

MIC1 PHANTOM +32V

Rear panel for A121 & A251 A121

A251

Item ref

952.904

952.906

Power supply Output @ 4Ω Mic inputs Line inputs Mic controls Line controls Phantom power USB/SD/FM player controls LED indicators Antenna connection Line output Speaker outputs Dimensions Weight

Switchable 110/240Vac, 50/60Hz (IEC) 120Wrms Mic 1 front combo, Mic 1+2 rear 6.3mm jacks Line 1+2 RCA (pairs) + Aux Line minijack (front) Mic 1 Level, Mic 2 Level, Low/High EQ, Vox Line 1 Level, Line 2 Level, USB/FM Level Low/High EQ +32V switchable (Mic 1) Play/pause, Pre (Ch-), Next (Ch+), mode On, -24/18/12/6/0dB, Limit F plug RCA (L+R) with Master volume control 2 x 6.3mm jack (4Ω min) or Com/100V screw terminals 483 x 44 x 325mm (1U) 7.8kg

Switchable 110/240Vac, 50/60Hz (IEC) 250Wrms Mic 1 front combo, Mic 1+2 rear 6.3mm jacks Line 1+2 RCA (pairs) + Aux Line minijack (front) Mic 1 Level, Mic 2 Level, Low/High EQ, Vox Line 1 Level, Line 2 Level, USB/FM Level Low/High EQ +32V switchable (Mic 1) Play/pause, Pre (Ch-), Next (Ch+), mode On, -24/18/12/6/0dB, Limit F plug RCA (L+R) with Master volume control 2 x 6.3mm jack (4Ω min) or Com/100V screw terminals 483 x 44 x 325mm (1U) 8.4kg

T 09-8375020

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

S SERIES 1U SLAVE AMPLIFIERS | AMPLIFIERS

S SERIES 1U SLAVE AMPLIFIERS Compact slave amplifiers with line input and output to either 4Ω minimum load or 100V line. Ideal for adding to existing mixer-amplifier set-ups to drive additional speaker arrays.

• Choice of 4Ω min. or 100V line output • Compact 1U rack format • Soft-knee output limiter • Multi-speed cooling fans

Ω LOW IMPEDANCE

100V LINE

1U 19” rack mountable

POWER VOLUME

OFF

0 LIMIT

S121 SLAVE AMPLIFIER 120W

POWER VOLUME

OFF

MAINS 110/240Vac 50/60Hz

WARNING: ELECTRIC SHOCK HAZARD DO NOT OPEN THIS EQUIPMENT MUST BE EARTHED. NO USER SERVICABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL. DO NOT EXPOSE TO RAIN OR MOISTURE. REPLACE MAINS FUSE ONLY WITH CORRECT TYPE AND RATING.

0 LIMIT

S251 SLAVE AMPLIFIER 250W

SPEAKERS

DO NOT OBSTRUCT COOLING FANS

VOLTAGE SELECTOR

110V

240V

100V

USE EITHER JACK OR 100V OUTPUT DO NOT USE JACK AND 100V OUTPUT TOGETHER

4 - 16Ω

LINE OUT

FUSE 3.15A

LINE IN

Rear panel for S121 & S251 S121 Item ref Power supply Output @ 4Ω Speaker outputs Dimensions Weight

952.908 120Wrms 483 x 44 x 325mm (1U) 7.5kg

S251 952.911 220-250Vac, 50/60Hz (IEC) 250Wrms 2 x 6.3mm jack (4Ω min) or Com/100V screw terminals 483 x 44 x 325mm (1U) 8kg

VISITOR CENTRE / THEME PARK PA SYSTEM 8 x HORNS FRH50

AUDIO SOURCE COM47 (see page 57)

AMPLIFIER A251U

SLAVE AMPLIFIER S251

(Tapped at 30W, see page 29) Item ref: 952.065

Item ref: 952.352

Item ref: 952.905

Item ref: 952.911

EXAMPLE SET-UP

POWER OFF

MIC 1

MIC 2

0 10

LOW

HIGH

VOX

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

MASTER

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

A251 MIXER AMPLIFIER 250W

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

AUX IN

952.967UK

AMPLIFIERS | A SERIES MIXER AMPLIFIERS

A SERIES 4 CHANNEL MIXER AMPLIFIERS A range of amplifiers providing 100V line or mono 8Ω speaker output. • 4 input channels • Switchable Vox mic priority and phantom power (XLR) on Channel 1 • Jack input on Channel 2 • 8Ω and 100V line outputs • Jack input switchable to line level on Channel 3

• Twin RCA mono line level and a single RCA slave output on Channel 4 • Bass and treble EQ • Peak and signal LEDs • 2U 19” rack mountable • Mains or DC operation

A30 MIXER AMPLIFIER 30W

A60 MIXER AMPLIFIER 60W

A120 MIXER AMPLIFIER 120W

110V~60Hz 240V~50Hz

OFF ON

AUX

OFF ON

AUX R

SLAVE OUT

OFF ON

+ 12Vdc

LINE IN

COM

T1A/240V T2A/110V

LINE OUT

Stock code: 952.967UK 8Ω 100V OUTPUT

SLAVE OUT

LINE OUT

LINE IN

MIC

MIC-3

MIC-2

VOX

MIC-1 GND

Rear panel for A30, A60 & A120 MIC

MIC-3

MIC-2

+12 PHANTOM

VOX

MIC-1 GND

Ω Rear panel detail

Item ref Frequency response Power : Mains Power : Battery DC power Output power: Max. Output power: RMS < 2% THD Output : Line Outputs : Speaker Input impedance : Mic Input sensitivity : Aux/Line Input sensitivity : Mic channels Signal to noise ratio : Line Signal to noise ratio : Mic Dimensions Weight

T 09-8375020

+12 PHANTOM

OFF ON

100V LINE

LOW IMPEDANCE

A30

A60

A120

952.967 100Hz - 12kHz (±3dB) 230Vac, 50Hz 12Vdc (5A) 30W 40W 30W 1V @ 600Ω 8Ω & 100V 1.8kΩ 300mV (-10.4dBV) 1.5mV (-56.4dBV) >75dB >70dB 425 x 88 x 230mm 5.0kg

952.970 100Hz - 12kHz (±3dB) 230Vac, 50Hz 12Vdc (8A) 42W 70W 60W 1V @ 600Ω 8Ω & 100V 1.8kΩ 300mV (-10.4dBV) 1.5mV (-56.4dBV) >75dB >70dB 425 x 88 x 230mm 7.5kg

952.973 100Hz - 12kHz (±3dB) 230Vac, 50Hz 24Vdc (8A) 92W 160W 120W 1V @ 600Ω 8Ω & 100V 1.8kΩ 300mV (-10.4dBV) 1.5mV (-56.4dBV) >75dB >70dB 425 x 88 x 230mm 10.0kg

F 09-8375019

E info@surplustronics.co.nz

2U 19” rack mountable

www.surplustronics.co.nz

S SERIES SLAVE AMPLIFIERS | AMPLIFIERS

S SERIES SLAVE AMPLIFIERS High power slave amplifiers for use with the Adastra A series mixer amplifiers or to drive 100V line or 8Ω speakers from any line level source. RCA signal input and output allows signal chaining for large multi-slave systems. Front panel Master volume, signal and peak LEDs for level control.

• Mains and DC operation • 19” rack-mounting ears included (2U) • Peak and signal LEDs • 8Ω and 100V line outputs

S120 SLAVE AMPLIFIER

110V~60Hz 240V~50Hz

WARNING: ELECTRIC SHOCK HAZARD DO NOT OPEN THIS EQUIPMENT MUST BE EARTHED. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONEL. DO NOT EXPOSE TO RAIN OR MOISTURE. REPLACE MAINS FUSE WITH CORRECT TYPE AND RATING. DO NOT OBSTRUCT VENTILATION SLOTS.

24Vdc

S240 SLAVE AMPLIFIER

T2A/240V T4A/110V

SLAVE SLAVE IN OUT

COM 8Ω 100V OUTPUT

Rear panel for S120, S240 & S360

Ω S360 SLAVE AMPLIFIER

Item ref Power: mains Power: Battery DC power Output power: RMS < 2% T.H.D Output power: Max. Frequency response Input sensitivity: Line (unbalanced) Output: Line Outputs: Speaker Signal to noise ratio Dimensions (without rack ears) Weight

100V LINE

S120

S240

S360

952.976 230Vac, 50Hz 24Vdc (8A) 92W 120W 160W 100Hz - 12kHz (±3dB) 300mV 1V @ 600Ω 100V and 8Ω >75dB 430 x 88 x 260mm 8.5kg

952.994 230Vac, 50Hz 24Vdc (16A) 170W 240W 320W 100Hz - 12kHz (±3dB) 300mV 1V @ 600Ω 100V and 8Ω >75dB 430 x 88 x 312mm 12.2kg

952.998 230Vac, 50Hz 24Vdc (24A) 230W 360W 480W 100Hz - 12kHz (±3dB) 300mV 1V @ 600Ω 100V and 8Ω >75dB 430 x 88 x 312mm 16.0kg

CONFERENCE ROOM DUAL ARRAY SYSTEM 8 x SPEAKERS CB40V-B (Tapped at 20W each, see page 15) Item ref: 952.131

SPEAKER ARRAY BRACKETS (see page 27) Item ref: 952.132

AUDIO SOURCE AD-200 (see page 43)

AMPLIFIER A120

Item ref: 952.980

Item ref: 952.973

AUDIO SOURCE COM47 (see page 56)

SLAVE AMPLIFIER S120

Item ref: 952.352

Item ref: 952.976

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

LOW IMPEDANCE

19” rack mountable

EXAMPLE SET-UP

AMPLIFIERS | A SERIES MIXER AMPLIFIER

A SERIES 6 CHANNEL MIXER AMPLIFIER A mixer amplifier with rear panel DIP switches that offer options for mic/line and phantom power for each channel. A send/return loop is provided for patching in external processors and a Slave out RCA allows the mix to be connected to subsequent amplifiers. • 6 universal inputs XLR/Jack/RCA • Electronically balanced inputs • Switchable phantom power • VOX priority channels 1 & 2 • Chime function on channel 1 • 8Ω, 16Ω and 100V line outputs • Peak and signal LEDs • Bass and treble EQ

CH-2

CH-1

CH-4

CH-3

CH-5

CH-6

A126 MIXER AMPLIFIER 120W

CH-5

CH-4

PHANTOM CHIME VOX MIC

-VE +VE

CH-3

-VE +VE SCREEN

CH-2

24Vdc

COM

8Ω

16Ω

70V

100V

+VE SCREEN

CAUTION

SIG

DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK

SCREEN

SPEAKER CONNECTIONS

-3

SPEAKER

OUTPUT

OFF OFF OFF LINE

CH-6

-3

-VE +VE SCREEN

OFF LINE

+VE SCREEN

-VE

-VE +VE SCREEN

OFF LINE

-VE OFF LINE

110V / T4A 240V / T2A

-3

OFF OFF LINE

-3

PHANTOM VOX MIC

-3 PHANTOM MIC

PHANTOM MIC

-3 PHANTOM MIC

240V~50Hz

PHANTOM MIC

Stock code: 952.997UK 110V~60Hz

OFF LINE

DISCREET COLUMN SPEAKER SYSTEM

EXAMPLE SET-UP

8Ω

16Ω

SEND

RETURN

SLAVE OUT

Rear panel for A126

CHIME

+ CH-1

GND

4 x COLUMN SPEAKERS SC20-V (Tapped at 20W each, see page 25) Item ref: 952.242

Ω 100V LINE

LOW IMPEDANCE

+48V PHANTOM POWER

2U 19” rack mountable

AUDIO SOURCES AD-100 (see page 43) Item ref: 952.979

AD-200 (see page 43) Item ref: 952.980

A126 Item ref Frequency response Power : Mains Power : Battery DC power Output power: Max. Output power: RMS < 2% THD Output : Line Outputs : Speaker Input impedance : Line Input impedance : Mic Input impedance : Return Input sensitivity: Line balanced Input sensitivity: Mic balanced Input sensitivity: Mic unbalanced Input sensitivity: Return Signal to noise ratio Dimensions Weight

T 09-8375020

952.997 100Hz - 10kHz (±3dB) 230Vac, 50Hz 24Vdc (8A) 92W 160W 120W 1V @ 600Ω 8Ω, 16Ω, 70V & 100V 10kΩ 1.8kΩ 10kΩ 300mV (-11.37dBV) 1.5mV (-56.4dBV) 26mV (-31.7dBV) 1V (0dBV) >92dB 484 x 88 x 325mm 10kg

F 09-8375019

4 x COM47 (see page 56) Item ref: 952.352

AMPLIFIER A126 Item ref: 952.997

E info@surplustronics.co.nz

www.surplustronics.co.nz

ZONING MIXERS | AMPLIFIERS

Zoning Products Adastra offers a range of signal distribution solutions for multi-zone installation and audio routing systems. Each product has been carefully designed to address a wide range of applications and is built to exacting standards to give long term, reliable service and simplicity of use. Comprehensive features have been the key design brief for this range, offering quick installation and straightforward setup.

Z5M

ZONING MIXER

Item ref Power supply Inputs Outputs Input impedance Output impedance Frequency response Signal to noise ratio THD Dimensions Weight

A zoning mixer featuring 2 inputs with individual volume controls, and 5 zones each with a mono switch. All inputs and outputs are stereo via balanced XLR connectors. Acts as the central mix and control in an installation serving up to 5 separate stereo speaker zones. • 2 inputs to 5 zones • Mono selectable for each zone • Fully balanced XLR connections

1U 19” rack mountable

ZONE 1

LINE 1

LINE 2

ZONE 2

LINE 1

MONO

LINE 2

ZONE 3

LINE 1

MONO

LINE 2

953.019 115/230Vac 50/60Hz - selectable (IEC) Line 1 L+R, Line 2 L+R, balanced XLRF Zone 1 to 5 L+R, balanced XLRM 40kΩ 220Ω 20Hz - 25kHz, +0/-1dB >100dB <0.005% 483 x 175 x 44mm 2.2kg ZONE 4

LINE 1

MONO

LINE 2

ZONE 5

LINE 1

MONO

LINE 2

LINE 1

MONO

Z5M 5-ZONE MIXER MIN

MAX

MIN

MAX

MIN

MAX

MIN

MAX

MIN

MAX

MIN

MAX

MIN

MAX

MIN

MAX

MIN

MAX

MIN

MAX

SIGNAL

POWER

OUT

AC INPUT

LINE 2

LINE 1

ZONE 5

ZONE 4

ZONE 3

ZONE 2

ZONE 1

FUSE T200mA/250V

Rear panel for Z5M

MULTI-ROOM INSTALLATION 5 x ACTIVE SPEAKER PAIRS BC5A-S (see page 17) Item ref: 170.164

AUDIO SOURCES AD-100 (see page 43) Item ref: 952.979

AD-200 (see page 43) Item ref: 952.980

ZONING MIXER Z5M Item ref: 953.019

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

EXAMPLE SET-UP

AMPLIFIERS | ZONING MIXERS

COMBINATION MAIN ROOM / BACKGROUND MUSIC INSTALLATION AUDIO SOURCES AD-100 (see page 43)

ZONING MIXER Z44R

Item ref: 952.979

Item ref: 953.020

AD-200 (see page 43) Item ref: 952.980

COM47 (see page 56) Item ref: 952.352

SLAVE AMPLIFIERS 2 x S50 (see page 33) Item ref: 952.938

19” rack shelf (see page 54)

EXAMPLE SET-UP

Item ref: 853.055

2 x S251 (see page 35) Item ref: 952.911

SPEAKERS 4 x BC4V-B (see page 21) Item ref: 952.713

4 x BC8-B (see page 20) Item ref: 100.911

T 09-8375020

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

ZONING MIXER | ZONING SPLITTER | AMPLIFIERS Z44R

Z44R

Item ref Power supply Mic/line channel inputs Mic/line channel controls Line 3 + 4 stereo inputs Line 3 + 4 stereo controls Output connections Output controls FX connections (6.3mm jack) FX controls Indicators (LED) Fire alarm contacts Dimensions Weight

MULTI-PURPOSE 1U MIXER 1U live/zoning rack mixer with 2 mic/line inputs and 2 stereo line inputs feeding 4 stereo outputs. Mic channels feed to all outputs, whereas the stereo channels are switchable to any required zone. Applications vary from additional vocal mixing for DJ set-ups to multi-room zoning for venues and many other scenarios. • Switchable 48V phantom power • Lo-cut rumble filter for mic channels • 3-band EQ for mic channels

48V

MIC/LINE 1

•2 -band EQ for stereo channels • F oot-switchable internal DSP reverb or ext. FX •4 stereo zone outputs with level controls

MIC/LINE 2

LEVEL

953.020 240Vac, 50Hz (IEC) Ch 1 front combo and rear jack, Ch 2 combo (rear) Level, Lo-cut, Gain, FX and Lo/Mid/Hi EQ faders Input A (L+R) 6.3mm jack / Input B (L+R) RCA Level, In A/B and Lo/Hi EQ faders Outputs 1-3 (L+R) RCA, Output 4 (L+R) 6.3mm jack Level, Line 3 on/off, Line 4 on/off Footswitch, Send (defeats onboard reverb), L+R Return Reverb time, Depth (onboard or external level) Power, 48V, Mic/line signal+peak, Line peak, Output peak Modular terminal, make-to-mute all except Mic 1 483 x 44 x 220mm 2.75kg

LINE 3

LEVEL

GAIN

REVERB

LINE 4

LEVEL

1U 19” rack mountable

OUT 1

OUT 2

OUT 3

OUT 4

LEVEL

TIME

GAIN

LINE 3

OFF

MIC 1

MID

IN A IN B

DEPTH

OUT 2

—

FOOT SWITCH

OUT 3

L RETURNS

OUT 4

Order ref: 953.020

SEND

MUTE CONTACTS

CAUTION

B LINE LINE44

RISK OF ELECTRIC SHOCK

XLR MIC 1

FX LOOP

OUT 1

Z44R

LINE 4

DO NOT EXPOSE TO RAIN OR MOISTURE

Z44R

230Vac FUSE T1A

IN A IN B

LINE 3

MIC/LINE 2

MIC/LINE 1

48V

Rear panel for Z44R LS26

LS26

Item ref Power supply Inputs Outputs Input impedance Output impedance Frequency response Signal to noise ratio THD Dimensions Weight

LINE SPLITTER Signal splitter with 2 line inputs which are buffered and divided across 6 outputs each. Can be used as a 6-way stereo splitter or can be switched as a mono system feeding all 12 outputs from input A. Applications include zone mixing, personal monitoring, effects patching and routing in complex recording setups.

953.022 115/230Vac 50/60Hz - selectable (IEC) A & B, (6.3mm jack) 1 - 6 & 7 - 12 (6.3mm jack) 20kΩ 220Ω 20Hz - 20kHz, +0/-1dB >95dB <0.008% 483 x 44 x 170mm 2.0kg

• Up to 12 outputs from 1 or 2 inputs • Individual volume control for each output • Input peak LEDs

1U 19” rack mountable

CHANNEL B

CHANNEL A

VOL 12

VOL 11

VOL 10

VOL 9

VOL 8

VOL 7

VOL 6

STEREO SIGNAL B 1

VOL 5

VOL 4

VOL 3

VOL 2

VOL 1

LS26

MONO

STEREO/MONO LINE SPLITTER

SIGNAL A

115V 60Hz

230V 50Hz

LS26 MODE

AC SELECTOR SWITCH

CAUTION MONO

OUT 1

OUT 2

OUT 3

OUT 4

OUT 5

OUT 6

INPUT A

STEREO

INPUT B

OUT 7

OUT 8

OUT 9

OUT 10

OUT 11

OUT 12

AC INPUT FUSE T200mA/250V

Rear panel for LS26 Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK

AMPLIFIERS | SOUND SOURCE Ω

A5X60

100V LINE

2U 19” rack mountable

LOW IMPEDANCE

ZONE AMPLIFIER A zone amplifier providing a choice of either 100V or low impedance outputs.

A5X60 Item ref Output power Power supply Fuse Output connections Input connections Controls Output format Power consumption Dimensions Weight

This unit features a 5 channel input section with individual volume controls which can be routed to each output or alternatively mixed and fed to all outputs simultaneously. • Up to 300Wrms output • 100V line or 4-16Ω output options • 5-zone amp or 5-output mixer-amp modes • 2U rack mountable

952.992 300W total (5 x 60Wrms) 230Vac, 50Hz T6A 5 x 3 binding posts (100V, 4-16Ω, common) 5 x paired RCA line 5 x input volume, 5 x output volume, mode switch 100V line or low impedance (4Ω min.) 400W max 482 x 438 x 88mm 17.3kg

A5X60 ZONE AMPLIFIER -∞

-∞

0dB

CH A

-∞

0dB

CH C

-∞

0dB

CH D

PROT

CLIP

SIG

-∞

CH B

CH C

SIG

-∞

0dB

CH D

0dB

SIG

-∞

POWER

SIG

-∞

0dB

CH E

PROT

SIG

CH A

-∞

0dB

CH B

-∞

0dB

CH E CAUTION

AC 240V/50Hz Fuse

100V

DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK

100V

WARNING!

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CH A 14~16Ω

14~16Ω

CH B

CH C

CH D

CH E

14~16Ω 5 SUB

www.avsl-adastra.com

COM

5 CH

COM

Rear panel for A5X60

MPA12

VEHICLE AMPLIFIER

POWER

LOW IMPEDANCE

VEHICLE AMPLIFIER

The unit can be easily mounted into a car or boat, and is ideal for connection to horns or surface mount speakers.

MIC

AUX

SIREN

MIC

AUX

• Fog horn and siren • Mounting hardware supplied • Speaker connections via 4 pin plug (supplied)

Rear panel for MPA12 MPA12

See page 28 for car roof mount horn speakers

T 09-8375020

Item ref Power supply Auxiliary input Microphone input Output impedance Output power Dimensions Weight

F 09-8375019

E info@surplustronics.co.nz

952.419 12Vdc 85mV (±1dB) @ 10kΩ 3.5mV (±1dB) @ 20 - 50kΩ 4 - 16Ω 12Wrms (4Ω) 40 x 150 x 140mm 790g

www.surplustronics.co.nz

SOUND SOURCE | AMPLIFIERS AD-100

AD-100

Item ref Power supply FM : Tuning range DAB frequency range Sensitivity THD Audio stereo separation Audio output voltage Audio (S+N)/N FM step frequency Adjacent channel selectivity Far-off selectivity Dimensions Weight

19” rack mountable

DAB/FM RADIO TUNER This unit features both a DAB and an FM tuner. Complete with auto tune and preset memory function it is easy to select the required channel with the supplied IR remote control. • Auto tune • Radio station display (RSD) • 9 preset memory

• IR remote control • Supplied with antenna

ON M1/M6

M2/M7

M3/M8

M4/M9

MODE

DOWN

AUTO SCAN

M5/M10

TUNE

AD-100 RADIO TUNER

SHIFT

952.979 230Vac, 50Hz 87.5 - 108MHz 174.928 - 239.2MHz 10uV emf 0.30% 30dB 400mV 50dB 50kHz 31dB 49dB 482 x 185 x 44mm 2.35kg

REMOTE SENSOR

SELECT MENU/INFO

OFF

DAB/FM

AUTO-SCAN

CAUTION

AC 230V/50Hz, 50VA Fuse T630mAL

DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK

WARNING!

R L OUTPUT

ANTENNA

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

www.adatra-pa.com

Rear panel for AD-100

DAB (Digital Audio Broadcasting) DAB works by combining two digital technologies to produce an efficient and reliable radio broadcast system. Traditionally radio programmes were broadcast on different frequencies via FM and AM, and the radio had to be tuned into each frequency, as needed. DAB is a digital radio broadcasting system that combines multiple audio streams onto a relatively narrow band centred on a single broadcast frequency, creating a more efficient communication channel. The original objectives of converting to digital transmission were to enable higher fidelity, more stations, and more resistance to noise and interference than in analogue FM radio.

Benefits of DAB • Great reception and less susceptible to interference • Excellent sound quality • Wider selection of channels, particularly in rural areas • Automatic tuning • More channels available

AD-200

Item ref Power supply Antishock Sample rate Frequency response Total harmonic distortion Signal to noise ratio Dynamic range Channel separation Dimensions Weight

1U 19” rack mountable

CD/USB/SD MULTIMEDIA AUDIO PLAYER

This multimedia player features CD, USB or SD inputs, easy track and folder search, direct track access and ID3 tag display. The 2 x RCA or balanced XLR allows for line level output that can be connected to various amplifiers. The 1U 19” rack mountable design allows for easy installation. Ideal for use in restaurants, bars or leisure centres. Supplied with remote control. • Digital audio playback

DIRECT TRACK ACCESS

OFF

• Single/continuous/random playback

REMOTE SENSOR

952.980 230Vac, 50Hz 40 Seconds 44.1kHz 20Hz to 20kHz <0.05% 100dB 96dB 50dB (1kHz) 482 x 44 x 185mm 3.35kg

AD-200 MULTIMEDIA AUDIO PLAYER

USB

EJECT

PLAY/PAUSE

STOP

+10

MUTE

PROG

FOLDER SKIP

SOURCE

MODE

PITCH

CD/USB/SD

CAUTION

L R

L OUTPUT

DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK

WARNING!

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

BALANCED OUTPUT

115V FUSE 250mA 250V

Rear panel for AD-200 Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

230V 110-120V AC~60Hz 220-240V AC~50Hz 20W

AMPLIFIERS | INDUCTION LOOP SYSTEMS

INDUCTION LOOP SYSTEMS Induction loops

Induction loop signals

Induction loop amplifiers are a must for modern PA installations to give people with hearing disabilities equal access to information and announcements.

Hearing aids designed to receive induction loop signals generally have a switch marked ‘M’ for microphone and ‘T’ for telephone (sometimes a combined position is provided). In the ‘T’ position a pickup coil, originally designed for picking signals from a telephone earpiece, is used to receive audio from induction loop systems.

Adastra’s induction loop equipment is designed to complement the A series mixer amplifiers with their multiple input options; allowing these induction loop amplifiers to be used stand alone, with up to three sound sources - no need for a separate mixer or mixer amplifier. How it works Induction loop amplifiers allow audio signals to be transmitted using a magnetic field to a suitably equipped listener. A magnetic field is created when current flows though a wire. In induction loop systems the wire is normally installed as a loop around the perimeter of the area. A small coil within a hearing aid or other suitable receiver then picks up this magnetic field and converts it to audio at a suitable level for the listener. The loop itself is simply an insulated wire installed at a low level, around a skirting board for example.

HALL PA WITH INDUCTION LOOP

The ideal signal strength for an induction loop system is such that a person switching between ‘M’ and ‘T’ would not notice a difference between the sound of someone speaking normally and a signal transmitted from the loop. We also have available a simple inductive loop receiver that allows you to listen to the loop signal using an ordinary pair of headphones, which is ideal for installing and testing induction loop systems. It is important that the cable used to form the loop is capable of carrying the current that the amplifier produces. Typical applications: • Churches and places of worship • Conference rooms and theatres • Museums, galleries and exhibitions

EXAMPLE SET-UP

SPEAKERS 2 x BC8-B (see page 20)

AMPLIFIER A121 (see page 34)

LOOP AMPLIFIER LA600

Item ref: 100.911

Item ref: 952.904

Item ref: 952.866

LOOP CABLE

Typical hearing aid: The user switches the hearing aid to the ‘T’ position to receive induction loop signals.

AUDIENCE AREA

POWER OFF

MIC 1

T 09-8375020

MIC 2

0 10

LOW

HIGH

VOX

LINE 1

LINE 2 USB/FM/AUX LOW

USB

0 10

HIGH

MIN

MAX

MASTER

PRE CH-

NEXT CH+

PLAY PAUSE

MODE

0 LIMIT

A121 MIXER AMPLIFIER 120W

AUX IN

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

INDUCTION LOOP SYSTEMS | AMPLIFIERS

LA600

2U 19” rack mountable

INDUCTION LOOP AMPLIFIER

An amplifier for use with induction cable loop to provide a magnetic signal in a venue. The addition of a loop amplifier is an essential consideration for any PA installation where hearing aid users are likely be part of the audience. • AGC (automatic gain control) • Tamper proof channel volume, bass & treble and loop current level controls

• Each channel accepts input via XLR, 6.3mm Jack or RCA phono • Inputs switchable between mic and line with optional phantom power +40Vdc • Built-in siren for evacuation alert • Peak current LED indication

LA-600 INDUCTION LOOP AMPLIFIER INPUTS

PEAK CURRENT

MASTER

SIREN 0

CH 1

CH 2

-10

CH 3

+10

-10

BASS

+10

TREBLE

POWER

LOOP CURRENT

DB / OCTAVE CAUTION

1.5

2.5

4.0

60m max

110m max

200m max

-3

T2A / 240V T4A / 110V

-3

L R

METAL LOSS CORRECTION

-3

L R

OFF LINE

CH 3

LOAD IMPEDANCE: 0.2Ω min / 2Ω max.

3.0

R LOOP OUTPUT | ALARM CONTACTS

2.0 2.5

1.5

0.5

PHANTOM MIC

1.0

PHANTOM MIC

CABLE mm2 TOTAL LOOP LENGTH

1.0

SLAVE I/O

DO NOT OPEN. NO USER SERVICABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK

LA-600 INDUCTION LOOP AMPLIFIER

OFF LINE

LOOP OUTPUT / CABLE SELECTION

PHANTOM MIC

110V - 60Hz 240V - 50Hz

CH 2

CH 1

Order ref: 952.866

www.avsl-adastra.com

Rear panel for LA600 LA600 HOW IT WORKS The magnetic field is picked up by hearing aid users by switching their hearing device to the “T” setting. The magnetic audio operates without using the hearing aid’s internal microphone and offers clearer listening without interference to the hearing aid user.

Item ref Power supply Frequency response Input sensitivity : Line Input sensitivity : Mic Signal to noise ratio THD Dimensions Weight

952.866 230Vac, 50Hz, (150W) 50Hz - 5kHz±3dB -6dBu/6kΩ -56dBu/2kΩ 75dB (line), 60dB (mic) <1% 430 x 280 x 88mm (2U) 7.2kg

LR1 INDUCTION LOOP RECEIVER • 3.5mm jack socket for headphone connection • Volume control and lo-cut switch to adjust sound quality • Ideal for testing/setting-up induction loop systems

• Can be used (with an induction loop system) to create an unobtrusive audio tour guide for art galleries, museums etc.

LR1 Item ref Power supply Dimensions Weight

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

952.854 9Vdc (PP3 battery) 104 x 59 x 31mm 78g

PORTABLE PA | ACCESSORIES | INTRODUCTION

Portable PA Our comprehensive range of portable PA units are the ideal choice for applications such as demonstrations, outdoor meetings, school fairs, exercise classes and vehicle based public address.

PA Systems

Megaphones

Adastra’s distinctive portable PA systems each offer unique features to suit various applications. Our EZPA unit boasts digital music playback by USB or the built in SD card readers, whilst the H25 offers many of the same features for lighter uses, such as product demonstrations and instruction.

Widely used for crowd management and mass communication, our portable megaphones are powerful and durable. Each megaphone features a built-in amplifier and is fitted with a high quality microphone. Pages 49 - 50

Pages 47 - 48

Accessories From rack accessories to microphones, Adastra’s vast range of accessories are the ideal way to expand your sound systems.

Noise Pollution

Transformers and Controls

Ideal sound limiting solutions from Adastra for monitoring noise levels in venues such as public houses.

Volume controls and 100V line transformers. Pages 54 - 55

Page 50

Icon Guide

Microphones

Expand your sound installations with Adastra’s 19” rack accessories. Easy self assembly makes mounting your equipment straightforward, and our lockable data cabinets provide safety and security.

Boundary microphones provide sound reinforcement for recording and sound pick-up applications whilst our specialist paging microphones are some of the best selling and most desired in the European PA market.

Pages 51 - 54

Pages 55 - 57

1U 100V LINE

100V Line

T 09-8375020

Rack Accessories

Max. weight load

RANGE

10kg

POWER OUTPUT

Maximum range

Maximum weight load

Maximum power output

600m

MAX. PROJECTION

50m

19” rack mountable

Maximum projection

F 09-8375019

30Wmax.

UP TO

19” rack mountable

E info@surplustronics.co.nz

www.surplustronics.co.nz

PORTABLE PA | DT50 | MICROPHONE TRANSMITTER

W NE

DT50 PORTABLE DESKTOP PA Self-contained PA unit with a compact PP moulded cabinet in a desktop format. Built-in USB/SD/FM player and dual handheld VHF microphone system make this a comprehensive solution for tasks as diverse as classroom activities, meetings and singing rehearsal. Mains or internal re-chargeable battery operation and very manageable size enable this unique product to be used practically anywhere. • Echo effect for microphones • 2 x VHF handheld microphones and remote control included • Integral holsters for handheld transmitters

• Powerful 50W output • Optional neckworn transmitter available 174.1MHz (178.851) and 175.0MHz (178.852)

DT50 Item ref Power supply Battery life HF driver LF Driver Output power SNR Construction Power supply : Handheld transmitters Wireless microphone frequencies Frequency response : Mic Dimensions Weight

NE W

DT50BAG DT50 TRANSIT BAG

Carry bag for DT50 portable PA unit made from heavy duty nylon with 10mm padding. Flaps for control/input panels and carry handle are secured with hook & loop fasteners and side slots accommodate the shoulder strap attachments. Full front and rear zip openings allow the DT50 to be operated in the bag with access to the rear microphone holders, whilst a front zip pocket is included for leads and accessories.

952.400 110-240Vac, 50/60Hz, 12Vdc or internal battery Up to 8 hours 2 x 25mmØ balanced dome 200mm (8") reinforced paper cone 50Wrms 85dB Injection-moulded polypropylene 9Vdc (PP3 battery) each 174.1MHz + 175.0MHz 40Hz - 15kHz 380 x 295 x 220mm 7.2kg

VHF HANDHELD MICROPHONE TRANSMITTER Additional accessory for the EZPA lite (952.424). • Optional addition for VHF systems

UP TO

50m RANGE

VH174.8 DT50BAG Item ref Dimensions Weight

952.403 400 x 290 x 250mm 570g

Item ref Power supply Capsule Operating freq Dimensions Weight

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

952.417 9V PP3 battery supplied Unidirectional, dynamic 174.8Mhz 270 x 45mmØ 190g

MEGAPHONES | PORTABLE PA

Megaphones Portable megaphones are widely used for crowd management and mass communication. They are ideal for public announcements, political rallies and many more scenarios. All of our megaphones feature a built-in siren and are supplied with a carrying strap for easy portability.

L-10

600m

MAX. PROJECTION

MEGAPHONE (10W MAX) WITH SIREN

L-10 Item ref Power max. Battery Range Strap length Dimensions Weight

This megaphone features a good quality built-in microphone, 10W amplifier, comfortable pistol grip handle, rotary volume control and a short carrying strap.

952.003 10W 12Vdc (8 x AA) 500 - 600m 80cm 235 x 150mmØ 630g

L-25

1km

MAX. PROJECTION

MEGAPHONE (25W MAX) WITH SIREN A powerful and durable megaphone featuring a built-in 25W amplifier and a high quality anti-feedback microphone with a handy push to talk switch and rotary volume control.

L-25 Item ref Power max. Battery Range Supplied with

Fitted with a pistol grip handle with trigger switch.

Dimensions Weight

952.016 25W 12Vdc (8 x C) 700m - 1km 5m power lead (cigarette lighter to DC plug), 100cm length shoulder strap 335 x 230mmØ 1.65kg

L-83

1km

MAX. PROJECTION

HEAVY DUTY MEGAPHONE (20W MAX) WITH SIREN A heavy duty megaphone made from ABS plastic. Fitted with a top quality handheld microphone which extends up to 1.2m and a powerful 20W amplifier. Also features a push to talk switch and volume control, and two short standing legs.

L-83 Item ref Power max. Power rms Battery Range Supplied with Dimensions Weight

T 09-8375020

F 09-8375019

E info@surplustronics.co.nz

952.125 20W 16W 12Vdc (8 x C) 1km 5m power lead, shoulder strap 370 x 220mmØ 1.85kg

www.surplustronics.co.nz

PORTABLE PA | MEGAPHONES | NOISE POLLUTION

L-84

1km

MAX. PROJECTION

HEAVY DUTY MEGAPHONE (20W MAX) WITH SIREN

L-84 Item ref Power max. Power rms Battery Range Supplied with

A powerful and durable megaphone made from ABS plastic with a rubber edge protector, suitable for all outdoor occasions. Fitted with a 20W amplifier and a high quality anti-feedback microphone with a push to talk switch and volume control.

Dimensions Weight

952.128 20W 16W 12Vdc (8 x C) 1km 5m power lead (cigarette lighter to DC plug), shoulder strap 340 x 220mmØ 1.85kg

MG-220D

600m

MAX. PROJECTION

MEGAPHONE (30W MAX) WITH SIREN A powerful pistol grip megaphone for voice reinforcement applications. MG-220D

• Anti-feedback microphone which can be attached to the megaphone or handheld • Switchable siren function • Robust ABS construction • Handheld or shoulder strap use

Item ref Power max. Battery Range Dimensions Weight

952.019 30W 12Vdc (8 x D) 600m 340 x 230mmØ 2kg

NPC30A NOISE POLLUTION CONTROL SYSTEM A sound limiter which is easy to install and operate. The system automatically monitors and limits the sound output in venues such as clubs, public houses, wine bars etc, avoiding possible fines and closure of premises. • Trigger level, reset time and frequency response are adjustable • Automatic operation • Remote microphone (supplied) monitors the sound level

• Built-in contactor with 30A switching capability • Approved by Environmental Health Departments • Fire alarm interface

NPC30A Item ref Power supply Dimensions Weight

952.801 230Vac, 50Hz 239 x 317 x 80mm 7.6kg

Item ref Power supply Lamp type Dimensions Weight

952.804 230Vac, 50Hz 60W, R80, E27 470 x 105 x 195mm 3.3kg

NPR4 REMOTE INDICATOR A “Traffic Light” type remote indicator for use with the Noise Pollution Control System. Housed in a metal enclosure with adjustable mounting bracket.

NPR4

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

ACCESSORIES | 19” EQUIPMENT RACKS

19” EQUIPMENT RACKS 19” equipment racks in black scratch resistant textured powder coated finish. Supplied in flat-packed kit form for easy self assembly. NOTE: No accessories supplied. • Manufactured from 1.5mm zinc coated steel • Fixing rails to front and rear with holes punched at 44.45mm (1.75”) centres • Pre drilled to allow fitting of doors • 35mm distance from mounting rail to front edge

19” EQUIPMENT RACKS - 435mm DEPTH 952.551

952.554

952.557

952.560

952.563

952.566

952.569

Size 6U 8U 12U 16U 20U 28U 35U Dims 545 x 370 x 435mm 545 x 455 x 435mm 545 x 635 x 435mm 545 x 815 x 435mm 545 x 990 x 435mm 545 x 1340 x 435mm 545 x 1650 x 435mm Weight 14.5kg 16kg 18.5kg 24kg 28kg 30kg 35.5kg

19” EQUIPMENT RACKS - 568mm DEPTH 952.550

952.553

952.556

952.559

952.562

952.565

952.568

Size 6U 8U 12U 16U 20U 28U 35U Dims 545 x 370 x 568mm 545 x 455 x 568mm 545 x 635 x 568mm 545 x 815 x 568mm 545 x 990 x 568mm 545 x 1340 x 568mm 545 x 1650 x 568mm Weight 17kg 19kg 22kg 25.5kg 28.5kg 36kg 42.5kg

ASSEMBLY & INSTALLATION OF EQUIPMENT RACKS Ensure the flat side is on the outer surface. Place the top upside down on a flat surface and fix the side panels as shown in diagram 1. The side panels overlap both top and bottom panels. The small tongues located at the four corners of both top and bottom panels fit inside the channel section of the side panels. Align and fasten the 4 inner corner screws.

Diagram 1

Attach the base to the side panels, align and secure the corner fixings. If required, a lockable door can be fitted. Place the location pivot (A in diagram 2) of the door into the pre-drilled hole on the bottom rail of the cabinet and fasten the spring loaded lever (B in diagram 2) into the pre-drilled hole in the top rail. NOTE: Install equipment before fitting door.

Diagram 2

B - Spring loaded lever

A - Locating pivot

T 09-8375020

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

ACCESSORIES | 19” RACK ACCESSORIES | VOLUME CONTROLS

19” SUPPORT MODULES Steel finish. Fixing screws supplied.

1U CABLE MANAGEMENT BAR

19” SUPPORT SHELF 2U

Ideal to ensure good cable management in Network and PA rack mount installations.

Support shelf for rackmounting 2 half-width units or equipment narrower than 450mm (17.7”) width into a 2U 19” rack space. Fixing hardware not supplied.

• Black powder coat finish

710.625

Size 1U

Dimensions 483 x 75 x 44.8mm

Weight 431g

853.055

Size 2U

Dimensions 482 x 88 x 376mm

Max. weight load

20kg

Weight 1.5kg

RACK FIXING SET Set of bolts, nuts and washers.

853.035 853.038 853.041

Size 1U 2U 3U

Dimensions 44 x 482 x 267mm 88 x 482 x 267mm 132 x 482 x 267mm

Weight 1.71kg 1.91kg 2.11kg

• 20 x M6 captive nuts • 20 x M6 bolts • 20 x plastic washers

Item ref 952.294

RELAY FITTED 100V VOLUME CONTROLS

19” RACK SECURITY COVERS 25mm deep covers to protect controls on rackmount equipment. Held in place by 2 hidden brackets, lockable at one end with the included padlock. Intended as a security or anti-tamper measure for installed rack units. • Rack fasteners are hidden/covered to prevent removal • Can be installed left-hand or right-hand locking • Security for noise abatement equipment (comp/limiter etc.) • Padlock included (can be substituted)

High quality attenuators supplied with plastic surface mount back box. The faceplate is fitted with a rotary switch, and each attenuator is fitted with a relay for muting output remotely from a fire alarm panel.

100V LINE

• Attenuation in 10 steps: 8 x 3dB and 2 x 6dB steps • 24V relay fitted for remote fire alarm muting

952.461 952.464 952.467 952.470

Power 12W 24W 36W 50W

Attenuation 3dB 3dB 3dB 3dB

Freq response 35Hz - 20kHz 35Hz - 20kHz 35Hz - 20kHz 35Hz - 20kHz

Relay 24V, 50mA 24V, 50mA 24V, 50mA 24V, 50mA

Dimensions 84 x 84 x 75mm 84 x 84 x 75mm 84 x 84 x 75mm 84 x 84 x 75mm

Weight 228g 230g 232g 234g

BACK BOX FOR VOLUME CONTROLS White plastic back box as supplied with the 100V volume controls. Designed to fit the range of volume controls 952.461, 952.464, 952.467 and 952.470.

853.071 853.072 853.075

Size 1U 2U 2U Vented

Dimensions 44 x 483 x 25mm 88 x 483 x 25mm

Weight 500g 700g 952.479

88 x 483 x 30mm

Dimensions 52 x 85 x 85mm

700g

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

Weight 64g

100V LINE TRANSFORMERS | BOUNDARY MICROPHONES | ACCESSORIES

100 VOLT LINE TRANSFORMERS A range of 100V line matching transformers. They are used to convert low impedance speakers (8 or 16Ω) to allow them to be used in 100V PA installations where long runs of cable are used.

952.434 952.437 952.440 952.443 952.446

Tappings 0.25, 0.5, 1, 2, 4W 0.5, 1, 2, 4, 8W 1.25, 2.5, 5, 10, 20W 1.9, 3.75, 7.5, 15, 30W 5, 10, 15, 20, 40W

100V LINE

Dimensions 62 x 38 x 35mm 71 x 41 x 42mm 81 x 48 x 50mm 91 x 57 x 57mm 91 x 60 x 58mm

Weight 180g 284g 481g 805g 933g

TBM48 ELECTRET CONDENSER BOUNDARY MICROPHONE A high quality, unidirectional, wide range back electret microphone for sound reinforcement, recording and other sound pick-up applications. • Wide frequency response • -10dB PAD and bass roll-off switches • Power switch with LED indicator • Requires 9-52V phantom power • Low profile, pyramid shape, metal housing • 4m, 3-pin mini XLR to 3-pole XLR lead supplied • Non-slip rubber base to minimise pickup of surface vibrations • Supplied in a foam lined plastic carry case

TBM48 Item ref Power supply Frequency response Impedance Max. input sound level Pickup pattern Sensitivity Dimensions Weight

952.197 9 - 52Vdc phantom 20Hz - 18kHz 300Ω (±20%), balanced 130dB SPL 1kHz Half cardioid -57dB (±3dB) @ 1kHz 90 x 27.5 x 100mm 145g

CBM20

BBM25

OMNIDIRECTIONAL BOUNDARY MICROPHONE

BOUNDARY MICROPHONE

This low profile ceiling or panel mounting boundary microphone has an omnidirectional pick-up pattern which is suitable for use where discrete audio surveillance is required. Its uses range from audio pick-up in induction loop systems to audio monitoring and recording in CCTV systems. • Phantom powered (9 - 52Vdc) • Excellent frequency response • Balanced output (XLR male connection)

CBM20 Item ref Cutout Frequency response Max. input SPL Sensitivity Dimensions Weight

T 09-8375020

952.345 20mmØ 30Hz - 15kHz 120dB, 1kHz @ 1% THD -76dB (±3dB) 71 x 30mmØ 160g

F 09-8375019

This boundary microphone features a dual input pattern and is fitted with a high sensitivity cartridge for a wide frequency response. Ideal for most PA applications. • Unidirectional and omnidirectional switchable via integral slide switch • 4m lead fitted with a 3.5mm jack plug and supplied with a 6.3mm adaptor

•M icrophone can be flat desk-top mounted or wall mounted with screws

BBM25 Item ref Battery Frequency response : Omni Frequency response : Uni Impedance Sensitivity Dimensions Weight

E info@surplustronics.co.nz

952.194 1.5Vdc (1 x LR44 - supplied) 100Hz - 12kHz 20Hz - 16kHz 1kΩ -65dB @ 1kHz (±3dB) 98 x 70 x 20mm 220g

www.surplustronics.co.nz

ACCESSORIES | PAGING MICROPHONES W NE

COM46 CONFERENCE MICROPHONE WITH BASE A flexible stem microphone with base for conferences or meetings. Connection to the base is via XLR and provides power to the condenser microphone capsule either from 2 x AAA batteries in the base or from external phantom power. • High quality back-electret condenser microphone • Flexible stem for convenient positioning • Paging switch on base unit • Battery or phantom power

COM46 Item ref Power supply Capsule Polar pattern Microphone : Dimensions Base : Dimensions Weight

952.353 2 x AAA batteries or external phantom 9-52Vdc Back-electret condenser Cardioid (unidirectional) 425 x 20mmØ 115 x 139 x 50mm 550g

COM47 CONFERENCE/PAGING MICROPHONE WITH BASE A gooseneck microphone with base for conference or paging applications. Connection to the base is via XLR and provides power to the condenser microphone capsule either from 2 x AAA batteries in the base or from external phantom power. • High quality back-electret condenser microphone • Gooseneck assembly for convenient positioning • Collar illuminates to indicate "on air" • Paging switch on base unit • Battery or phantom power

COM47 Item ref Power supply Capsule Polar pattern Microphone : Dimensions Base : Dimensions Weight

952.352 2 x AAA batteries or external phantom 9-52Vdc Back-electret condenser Cardioid (unidirectional) 435 x 21mmØ 115 x 139 x 50mm 560g

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

PAGING MICROPHONES | ACCESSORIES

M-SERIES PAGING MICROPHONES These high quality, heavy duty paging microphones are available with or without chiming function. Specially developed and designed for punishing industrial environments, these microphones are now some of the best selling and most desired in the European PA market. Their strong, robust and stable base incorporates separate push switches to operate microphone and/or chime. • Strong, flexible 330mm gooseneck securely fixes into the base • Base is fitted with 4 soft rubber protection feet • Microphone can be used free standing or wall mounted

Item ref Battery Controls Frequency response Impedance Sensitivity Termination Cable Dimensions Weight

M-49

M-50

952.190 N/A Latching mic on/off, non-latching mic on/off 100Hz - 10kHz 500Ω 2mV/Pa (-73dBV) Bare wires 6.0m 370 x 123 x 115mm 850g

952.193 3Vdc (2 x AA) Mic on with chime, mic off with chime 100Hz - 10kHz 1kΩ 1.9mV/Pa (-54dBV) 3-pin XLR plug 6.0m 370 x 123 x 115mm 860g

TGM3 TALK THROUGH GLASS INTERCOM Designed to allow conversation through a glass partition. Typical applications are ticket booths, bank counters, petrol stations and receptions. • Desk mount base station with condenser gooseneck microphone • Glass mount remote station • Red LED power ON indication • Call tone to alert base station • Rotary switched volume control • Supplied with interconnection cable and AC/DC adaptor

TGM3 Item ref Power supply Speaker output Consumption Dimensions : Base unit Dimensions : Glass unit Weight

T 09-8375020

952.827 9Vdc, 300mA 400mW max 150mA 115 x 62 x 173 mm 35 x 85mmØ 850g

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

TECHNICAL DATA | SPEAKER COMPARISON CHART

DRIVERS

HORNS

WALL

Model number

Power

Size

HC15-V

15W

6x4" x2

IP65

952.170

HC30-V

30W

6x4" x4

IP65

952.173

SC12-V

12W

2.5" x4

952.240

SC20-V

20W

2.5" x7

952.242

952.534

CB40V-W

60W

2 x 3.5"

952.130

952.543

CB40V-B

60W

2 x 3.5"

952.131

100W

6.5"

952.537

CSP3V-W

30W

3.5"

952.136

RC5

35W

5.25"

100.031

CSP3V-B

30W

3.5"

952.137

EC5V

60W

5.25"

952.161

BC4A-W

170.145

EC6V

80W

6.5"

952.163

BC4A-B

170.146

EC8V

100W

952.165

BC5A-S

30W

5.25"

170.164

CC5

80W

5.25"

952.184

BC5A-W

30W

5.25"

170.165

CC6

80W

6.25"

952.153

BC5A-B

30W

5.25"

170.166

CC8

120W

952.155

WPS4

30W

IP35

952.518

EC56V

5.25"

952.168

WPS5

35W

5.25"

IP35

952.521

CM-VW

2.5"

952.176

FC4-W

40W

IP44

100.960

CM-VC

2.5"

952.180

FC4-B

40W

IP44

100.963

OV-W4

50W

6" x 9"

IP34

125.072

FC5-W

100W

IP44

100.967

OV-W8

50W

6" x 9"

IP34

125.075

FC5-B

100W

IP44

100.965

OD5-W4

80W

IP35

125.030

FC4V-W

40W

IP44

952.962

OD5-B4

80W

IP35

125.041

FC4V-B

40W

IP44

952.964

OD5-W8

80W

IP35

125.032

FC5V-W

100W

IP44

952.965

IP44

100V line

Low Imp

Pair IP Page supplied rating Item ref no.

Power

Size

SL5

35W

5.25"

952.547

SL6

40W

6.5"

952.548

C5D

80W

5.25"

952.528

C6D

100W

6.5"

C8D

120W

C6S

COLUMN

Model number

100V line

Low Imp

Pair IP Page supplied rating Item ref no.

OD5-B8

80W

IP35

125.044

FC5V-B

100W

952.960

OD6-W4

100W

6.5"

IP35

125.061

BC3W

60W

100.898

OD6-B4

100W

6.5"

IP35

125.047

BC3B

60W

100.899

OD6-B8

100W

6.5"

IP35

125.050

BC4W

70W

100.901

OD6-W8

100W

6.5"

IP35

125.063

BC4B

70W

100.902

PS50-W

20W

952.426

BC5W

90W

5.25"

100.904

PS50-B

20W

952.427

BC5B

90W

5.25"

100.905

PS65-W

30W

6.5"

952.429

BC6W

120W

6.5"

100.907

PS65-B

30W

6.5"

952.430

BC6B

120W

6.5"

100.908

W5D-P

100W

5.25"

952.919

W6D-P

120W

6.5"

952.922

BACKGROUND

PENDANT

MARINE

CEILING

Speaker comparison chart

BC8W

180W

100.910

BC8B

180W

100.911

IW5

50W

100.032

BC3V-W

60W

952.710

SW-VW

10W

5.5"

952.221

BC3V-B

60W

952.711

WS3V

3.5"

952.140

BC4V-W

70W

952.712

CRH15

30W

9 x 5"

952.306

BC4V-B

70W

952.713

CH15

15W

952.237

BC5V-W

90W

5.25"

952.714

CH25

25W

10"

952.234

BC5V-B

90W

5.25"

952.715

CH40

40W

12"

952.231

BC6V-W

120W

6.5"

952.716

FRH50

30W

6.5"

IP65

952.065

BC6V-B

120W

6.5"

952.717

RH15

15W

10 x 5.5"

IP66

952.095

BP3V-W

60W

IP54

952.810

RH15V

15W

10 x 5.5"

IP66

952.098

BP3V-B

60W

IP54

952.811

22 22

IP66

RH25V

25W

12 x 7"

IP66

952.101

BP4V-W

70W

IP54

952.812

RH40V

30W

16 x 8"

IP66

952.248

BP4V-B

70W

IP54

952.813

HCH15

15W

IP66

952.079

BP5V-W

90W

5.25"

IP54

952.814

HCH15V

15W

IP66

952.082

BP5V-B

90W

5.25"

IP54

952.815

HCH20V

25W

10.5"

IP66

952.085

BP6V-W

120W

6.5"

IP54

952.816

HCH25V

30W

12"

IP66

952.088

BP6V-B

120W

6.5"

IP54

952.817

EH12V

15W

9 x 6"

IP56

952.245

FSV-W

190W

5.25"

IP35

952.961

EH30V

30W

11.5 x 8"

IP56

IP35

952.246

FSV-B

190W

5.25"

952.963

CF16

16"

952.199

C25V-W

30W

2.5"

952.820

CF20

20"

952.201

C25V-B

30W

2.5"

952.821

HD40V

40W

952.110

B30V-B

60W

952.887

HD60V

60W

952.116

B30V-W

60W

952.888

HD35

40W

952.207

WSP25-B

25W

5.5"

IPX5

952.941

HD60

60W

952.210

WSP25-W

25W

5.5"

IPX5

952.959

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

APPLICATIONS | TECHNICAL DATA

Applications Adastra products cover environments and applications with a focus on clear and efficient sound coverage. Public Address Systems A public address system is a means of sound reinforcement for relating speech and audible information to a group of people. The setup may vary from a single portable amplifier in a small room to an intricate multi-room zoned system with multiple speaker arrays. Since each public address venue will have its own characteristics, there are many different speaker types and installation methods depending upon the architecture of the building, ambient noise levels and coverage requirements. The key demands from any public speaker are efficient speech delivery and wide area coverage. Typical venues include: schools/universities, medical centres, market halls, airports, train stations and places of worship.

Background Music Systems Generally, background music is a term used for pleasant and unobtrusive playback of recorded material. Many public buildings benefit from background music systems to help create an ambience or mood for their service users. These systems may be tailored to each building and its function in much the same way as with public address systems. The main difference is that full range audio quality is imperative with background music in order to make it listenable and inoffensive, which is not necessarily a key requirement for basic speech delivery. Applications include: bars, retail outlets, restaurants, galleries, museums and leisure centres.

Outdoor & weatherproof systems Some public address and background music components are designed for use in outdoor or damp environments. The materials used and construction methods help to make them weather resistant and able to withstand outdoor conditions. The main factors to be taken into account when planning outdoor or weatherproof systems are safety and durability of the electrical components to be used within the proposed environment. This includes any of the equipment exposed to the potentially damaging elements including speakers, transformers, cabling and connectors. Mixers and amplifiers are more often sited in an indoor environment. Typical environments include: patios, auction sites, arenas, theme parks, marinas and swimming pools.

T 09-8375020

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

TECHNICAL DATA | TYPES OF SYSTEM

Types of System Standard Low Impedance Speakers

Impedance is measured in Ohms (Ω). Higher impedance opposes the output of the amplifier more, causing it to deliver less power, whereas lower impedance allows the amplifier to deliver more power. Impedance visual representation: The speaker impedes any electrical current flowing through it, in the same way that the neck of an hourglass impedes the sand flow.

Since the coil is wound from very thin wire, there is a certain amount of resistance to the electricity passed through it. This, coupled with some other electrical characteristics, is known as impedance.

The amplifier needs this impedance to stop itself from over-working and burning itself out, and is an important consideration when matching amplifiers and speakers together in a system.

The narrow neck controls the flow of sand just as a speaker’s impedance controls the flow of current

2 narrow necks makes it half as difficult for the sand to pass through, just as 2 parallel speakers have half the impedance as 1, allowing twice as much power to flow through

If the neck is too wide it offers too little control, just as when the speaker impedance is too low and allows too much power to flow from the amp, resulting in eventual failure

For any given amplifier, the impedance of the speakers attached to it must not be below the rated output impedance of the amplifier and must be rated to handle the power that the amplifier will deliver at that impedance.

Basic low impedance set-up

100W @ 4Ω 70W @ 8Ω

For instance, a 2 x 100W amplifier may be rated down to a minimum of 4Ω on each side. However, if an 8Ω speaker is attached to each side, the amplifier may only deliver 2 x 70W. Therefore, 70W would be the minimum handling capacity for these speakers.

+ 8Ω _

(Please refer to the instruction manual of the amplifier being used to find the power output at 4Ω, 8Ω, etc)

For 2 speakers with 8Ω impedance, the overall impedance (or combined load) will be 4Ω, allowing the 100W amplifier to deliver its full output across this pair of speakers. The power will be shared, so each speaker will receive 50W (even though both are capable of handling up to 70W).

+ _ 8Ω 70W

Parallel low impedance set-up

100W @ 4Ω

+ 8Ω _ 4Ω combined load

When 2 speakers are connected together in parallel (that is “+” to “+” and “-” to “-”), the electricity from the amplifier can flow through 2 routes instead of one. Having twice the number of routes to flow through effectively, means that it is half as difficult for the electricity to get around the circuit. Therefore, the impedance (resistance to flow) is halved when 2 of the same type speaker are linked together in parallel.

70W

100W @ 4Ω 70W @ 8Ω

50W

+ 8Ω _ 50W

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

100W @ 4Ω

+ _ 8Ω 50W

4Ω combined load

Standard loudspeakers comprise of 3 main components: a cone, a magnet and a coil. Passing a current through the coil causes the attached cone to move forward or backward. The coil is fed the electrical signal from an amplifier, which provides enough electricity to move the cone quickly, causing it to vibrate and make sound.

TYPES OF SYSTEM | TECHNICAL DATA

Types of System 100V Line Speakers For many applications, it is necessary to drive many speakers with a single amplifier, giving greater coverage to multiple rooms or over a given area. Constant voltage systems (usually 100V line) employ a transformer in the amplifier to convert the output to high impedance and a corresponding transformer in each speaker to tap off the required power from the amplifier.

Theoretically, this allows a large number of speakers to be driven by one amplifier, so long as the overall power being tapped by the speakers is within the amplifier’s output capacity (usually 90% of the amplifier’s maximum rated output).

Standard 100V line set-up Total tapped power: 80W 20W

100W Amplifier

In addition, the transformers in each speaker may have tappings at different points along the primary coil, which effectively draw different Wattages from the amplifier. For example, a 10W speaker may also have settings for 5W or 2.5W.

20W

The speaker output may also be varied using remote volume controls, known as attenuators, but these should be considered to be at their maximum volume output when choosing an amplifier to drive the speakers.

100V line set-up with multiple tappings Wired in parallel and tapped to 90% of the amplfifiers max. power output

100W Amplifier

15W

Attenuator 0 - 20W

20W

Attenuator 0 - 20W

10W

20Wmax. + 15W + 20Wmax. + 5W + 20W + 10W = 90W

If more speakers are required beyond 90% of the 100V amplifier’s maximum output, a slave amplifier may be employed to drive these.

The slave amplifier is simply linked from the line output of the main amplifier, to which another series of speakers are then linked to, in the same way the speaker are from the main amplifier.

Extended 100V line set-up Main 4 speaker system with additional 4 speaker set and slave amplifier

Line input Line output

MAIN 100W Amplifier

SLAVE 100W Amplifier

T 09-8375020

F 09-8375019

20W

E info@surplustronics.co.nz

www.surplustronics.co.nz

TECHNICAL DATA | TYPES OF SYSTEM

Types of System Active Speakers Active speakers contain their own amplifier to drive the speaker, which will be matched by impedance and power handling. Some active models contain an amplifier that can also drive another passive speaker (satellite). The main advantage of this type of system is that there is no need for

separate amplifiers, which also means that the system can be expanded by simply adding more active speakers and cascading the signal from one to the next. However, each speaker also requires power from the mains, so this should be considered when planning an active speaker installation.

Individual active speakers SIGNAL

AMP

AMP POWER SUPPLY

POWER SUPPLY

Active speakers with satellites SIGNAL AMP

AMP

AMP POWER SUPPLY

POWER SUPPLY

Dispersion Angles Calculating the spacing required in-between speakers using the dispersion angle The spacing between speakers should be the distance between the dispersion overlap at the listener’s height.

Calculating the spacing requires trigonometry (using Tangent) in the following equation.

(Speaker height – Listener height) x TAN (dispersion angle / 2) x 2 Example: (2.8 – 1.5) x TAN (45º) x 2 1.3 x 1 x 2 = 2.6m apart (speaker spacing)

Room Height 2.8m

Speaker spacing

Listener Height 1.5m

Dispersion 90º

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

IP RATINGS | GENERAL CONSIDERAIONS | TECHNICAL DATA

IP Ratings To help determine the suitability of a speaker or other product for use in certain environments, the IP code (Ingress Protection Rating) has been introduced as the international standard rating for a product’s protection against damage from foreign objects and water ingress.

The IP rating is made up of two numbers; the first relates to ingress of foreign objects, the second relates to water ingress.

Protection against foreign objects ingress 0

Not protected

Protection from non-deliberate ingress of solid objects greater than 50mmØ

Protection from non-deliberate ingress of solid objects greater than 12.5mmØ

Protection from non-deliberate ingress of solid objects greater than 2.5mmØ

Protection from non-deliberate ingress of solid objects greater than 1mmØ

Protection from ingress of an amount of dust that would compromise operation

Fully protected against ingress of dust Protection against water ingress

Not protected

Protection from water dripping vertically

Protection from water dripping vertically when tilted at 15º

Protection from sprayed water from up to 60º angle

Protection from splashed water from any direction

Protection from water projected from a 6.3mm nozzle in any direction

Protection from powerful water jet from a 12.5mm nozzle in any direction

Protection against immersion in 1m of water up to 30mins

Protection against complete, continuous submersion in water beyond 1m

General Installation Considerations 1. Do not run microphone cables near mains, data, telephone or 100V line cables 2. Do not run 100V line cables near data, telephone or other low voltage cables

7. Always use a balanced or floating low impedance microphone terminating into a balanced input on long microphone cable runs

12. Ensure correct AC voltage and adequate current rating at the mains supply for all amplifiers and rack components

8. Ensure that all loudspeakers are in-phase

13. Only use the mains leads supplied with equipment or of equal compliance and current capacity

3. Do not exceed 90% of the amplifiers output power when using 100V line (speech only)

9. Ensure that there are no short circuits on the loudspeaker line before connection to the amplifier

4. Do not exceed 70% of the amplifiers output power when using 100V line (high level background music)

10. For outdoor, humid or dusty enviroments, ensure that the speaker units used have an adequate IP rating for protection, and that all amplifiers and rack components are completely sheltered from ingress

5. Do not use re-entrant horn loudspeakers for background music unless the loudspeaker has been specifically designed for this purpose 6. Avoid jointing microphone cable. When this is unavoidable make sure a good screened connector is used (eg: XLR)

T 09-8375020

14. Fix all speaker components securely to walls and ceilings using appropriate fixings for the substrate, and employ safety wires wherever possible

11. Secure amplifiers and other rack components in an appropriate case or cablinet capable of supporting the weight and giving adequate cooling ventilation

F 09-8375019

E info@surplustronics.co.nz

www.surplustronics.co.nz

TECHNICAL DATA | GLOSSARY OF TERMS

Glossary of Terms 2-way speaker – A 2-way speaker has two drivers, a tweeter to handle high frequencies, and a woofer to handle mid to low frequencies. Background music – Music that is intended to provide an unobtrusive ambient atmosphere to a location. Crossover - A circuit that divides the frequency spectrum into two or more parts. A crossover acts as a filter, allowing certain frequencies to pass through to the speaker while blocking others, sending only high frequencies to the tweeter and only low frequencies to the woofer. Decibel (dB) - a unit used to measure the intensity of a sound or the power level of an electrical signal by comparing it with a given level on a logarithmic scale. Dispersion – The degree of which a speaker’s sound is spread over the listening area. Driver – Any individual device on a loudspeaker that contributes to the creation of sound, also referred to as woofer or tweeter. Dynamic range - the ratio between the largest and smallest possible values of sound. Frequency response – Measured in Hertz (Hz). The human ear responds to frequencies from 20Hz to 20kHz (approx). A speaker’s frequency response indicates how much of that range can be reproduced. Hertz (Hz) – A unit used to measure sound frequency. Impedance – The amount of resistance to the flow of current, measured in Ohms (Ω). In-ceiling/In-wall speakers – Speakers that have been specifically designed for installation in a ceiling or wall to mount flush. The cavity in the ceiling or wall acts as a cabinet, so the speakers can produce more bass compared to standalone speakers. Neodymium - A material used in some speaker magnets. Neodymium magnets are smaller and more powerful than conventional speaker magnets.

Ohms (Ω) – The measurement of electrical resistance. Often used to show the impedance of a speaker coil. Outdoor speakers - Speakers that are designed specifically for placement in outdoor environments. Many outdoor speakers are designed to project sound over a larger area and to provide a little more bass than typical indoor speakers. They are also built to be weather resistant. Power handling - A measure of how much amplifier power, in watts, a speaker can take before it is damaged. RMS - A term used to indicate the average level of power that a receiver or amplifier can sustain over a given period of time. Average power ratings provide a more realistic assessment of your amp’s performance than peak power since an amp can only sustain peak power for a short period of time. RMS stands for “root mean square,” which is one of the mathematical methods used to calculate an amp’s average power output. While it isn’t an accurate descriptor of the measurements themselves, it’s commonly used throughout the industry to denote the average power rating. Satellite speaker - Small speakers generally used as surround speakers placed or mounted in various locations (hence the name “satellite”) around a room for a home theatre setup. Because they tend to have limited bass response, they’re often designed to be used with a matching subwoofer. Sensitivity - Sensitivity ratings shows how effectively a speaker converts power (watts) into volume (decibels). The higher the rating, the louder your speakers will play with a given amount of amplifier power. Sensitivity is often measured by driving a speaker with 1W and measuring the loudness in decibels at 1m and described as SPL (sound pressure level).

Subwoofer - A speaker specially designed to reproduce a range of very low frequencies only (the bass). The typical range for a subwoofer is about 20-200Hz. A “powered subwoofer” includes a built-in amplifier to drive the speaker. Tappings – 100V line speakers can have multiple power settings. For example: 20W, 10W, 5W, 2.5W Terminals – Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors. Binding post terminals are a sturdier, more versatile type of speaker jack, often found on higher-quality speakers and receivers, and on most amplifiers. They’re threaded, so you can tighten them down against the wire or connector for a tight connection. Transient - A short-lived aspect of a signal, such as the attack and decay of musical tones. A speaker that can react quickly to rapid changes in the music is said to have good “transient response.” Tweeter - A small, lightweight driver that reproduces the highest musical frequencies, like violins, cymbals, female vocals, etc. The typical range for a tweeter is everything above 2,000Hz approx. Voice coil - The cylindrical coil of wire that moves in the magnetic field of a dynamic driver. The voice coil is bonded to the diaphragm, which actually produces the sound. Watt - A unit of power. Equal to the power in a circuit in which a current of one ampere flows across a potential difference of one volt. Woofer - A type of driver that features a cone-shaped diaphragm, commonly used for producing the mid and low frequency portions of the music signal.

Stereo system - Made up of two speakers; one to play the left channel of sound and a second to play the right channel sound. Stereo speaker setups are the most common for music listening, since most music is mixed for stereo, as opposed to mono (single-channel) or multi-channel surround recordings.

Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry.

INDEX

Stock code Index 100.031UK . . . . . . 5 100.032UK . . . . . 13 100.898UK . . . . . 20 100.899UK . . . . . 20 100.901UK . . . . . 20 100.902UK . . . . . 20 100.904UK . . . . . 20 100.905UK . . . . . 20 100.907UK . . . . . 20 100.908UK . . . . . 20 100.910UK . . . . . 20 100.911UK . . . . . 20 100.960UK . . . . . 18 100.963UK . . . . . 18 100.965UK . . . . . 18 100.967UK . . . . . 18 103.012UK . . . . . 26 103.015UK . . . . . 26 125.030UK . . . . . 10 125.032UK . . . . . 10 125.041UK . . . . . 10 125.044UK . . . . . 10 125.047UK . . . . . 10 125.050UK . . . . . 10 125.061UK . . . . . 10 125.063UK . . . . . 10 125.072UK . . . . . . 9 125.075UK . . . . . . 9 129.130UK . . . . . 26 129.131UK . . . . . 26 129.133UK . . . . . 26 129.134UK . . . . . 26 129.207UK . . . . . 26 129.208UK . . . . . 26 170.145UK . . . . . 16 170.146UK . . . . . 16 170.164UK . . . . . 17 170.165UK . . . . . 17 170.166UK . . . . . 17 710.625UK . . . . . 54 853.011UK . . . . . 53 853.014UK . . . . . 53 853.017UK . . . . . 53 853.020UK . . . . . 53 853.023UK . . . . . 53 853.026UK . . . . . 53 853.029UK . . . . . 53 853.032UK . . . . . 53 853.035UK . . . . . 54 853.038UK . . . . . 54 853.041UK . . . . . 54 853.050UK . . . . . 53 853.055UK . . . . . 54 853.071UK . . . . . 54 853.072UK . . . . . 54 853.075UK . . . . . 54 853.078UK . . . . . 53 853.079UK . . . . . 53 952.003UK . . . . . 49 952.016UK . . . . . 49 952.019UK . . . . . 50 952.065UK . . . . . 29 952.079UK . . . . . 30 952.082UK . . . . . 30 952.085UK . . . . . 30 952.088UK . . . . . 30 952.095UK . . . . . 29 952.098UK . . . . . 29 952.101UK . . . . . 29 952.110UK . . . . . 31 952.125UK . . . . . 49 952.128UK . . . . . 50 952.130UK . . . . . 15 952.131UK . . . . . 15 952.132UK . . . . . 27 952.136UK . . . . . 16

952.137UK . . . . . 16 952.138UK . . . . . 27 952.140UK . . . . . 14 952.153UK . . . . . . 7 952.155UK . . . . . . 7 952.161UK . . . . . . 6 952.163UK . . . . . . 6 952.165UK . . . . . . 6 952.166UK . . . . . . 6 952.167UK . . . . . . 6 952.168UK . . . . . . 8 952.170UK . . . . . 25 952.173UK . . . . . 25 952.176UK . . . . . . 8 952.180UK . . . . . . 8 952.184UK . . . . . . 7 952.190UK . . . . . 57 952.193UK . . . . . 57 952.194UK . . . . . 55 952.197UK . . . . . 55 952.199UK . . . . . 31 952.201UK . . . . . 31 952.207UK . . . . . 31 952.210UK . . . . . 31 952.216UK . . . . . 31 952.221UK . . . . . 14 952.231UK . . . . . 28 952.234UK . . . . . 28 952.237UK . . . . . 28 952.240UK . . . . . 25 952.242UK . . . . . 25 952.245UK . . . . . 30 952.246UK . . . . . 30 952.248UK . . . . . 29 952.294UK . . . . . 54 952.306UK . . . . . 28 952.345UK . . . . . 55 952.352UK . . . . . 56 952.353UK . . . . . 56 952.400UK . . . . . 48 952.403UK . . . . . 48 952.410UK . . . . . 47 952.413UK . . . . . 47 952.417UK . . . . . 48 952.419UK . . . . . 42 952.426UK . . . . . 12 952.427UK . . . . . 12 952.429UK . . . . . 12 952.430UK . . . . . 12 952.434UK . . . . . 55 952.437UK . . . . . 55 952.440UK . . . . . 55 952.443UK . . . . . 55 952.446UK . . . . . 55 952.461UK . . . . . 54 952.464UK . . . . . 54 952.467UK . . . . . 54 952.470UK . . . . . 54 952.479UK . . . . . 54 952.518UK . . . . . 17 952.521UK . . . . . 17 952.528UK . . . . . . 4 952.534UK . . . . . . 4 952.537UK . . . . . . 5 952.543UK . . . . . . 4 952.547UK . . . . . . 3 952.548UK . . . . . . 3 952.550UK . . . . . 52 952.551UK . . . . . 52 952.553UK . . . . . 52 952.554UK . . . . . 52 952.556UK . . . . . 52 952.557UK . . . . . 52 952.559UK . . . . . 52 952.560UK . . . . . 52 952.562UK . . . . . 52

Alphabetical Index 952.563UK . . . . . 952.565UK . . . . . 952.566UK . . . . . 952.568UK . . . . . 952.569UK . . . . . 952.570UK . . . . . 952.572UK . . . . . 952.574UK . . . . . 952.576UK . . . . . 952.578UK . . . . . 952.580UK . . . . . 952.582UK . . . . . 952.584UK . . . . . 952.586UK . . . . . 952.588UK . . . . . 952.590UK . . . . . 952.592UK . . . . . 952.594UK . . . . . 952.596UK . . . . . 952.600UK . . . . . 952.603UK . . . . . 952.710UK . . . . . 952.711UK . . . . . 952.712UK . . . . . 952.713UK . . . . . 952.714UK . . . . . 952.715UK . . . . . 952.716UK . . . . . 952.717UK . . . . . 952.801UK . . . . . 952.804UK . . . . . 952.810UK . . . . . 952.811UK . . . . . 952.812UK . . . . . 952.813UK . . . . . 952.814UK . . . . . 952.815UK . . . . . 952.816UK . . . . . 952.817UK . . . . . 952.820UK . . . . . 952.821UK . . . . . 952.827UK . . . . . 952.854UK . . . . . 952.866UK . . . . . 952.887UK . . . . . 952.888UK . . . . . 952.904UK . . . . . 952.906UK . . . . . 952.908UK . . . . . 952.911UK . . . . . 952.919UK . . . . . 952.922UK . . . . . 952.931UK . . . . . 952.934UK . . . . . 952.938UK . . . . . 952.941UK . . . . . 952.959UK . . . . . 952.960UK . . . . . 952.961UK . . . . . 952.962UK . . . . . 952.963UK . . . . . 952.964UK . . . . . 952.965UK . . . . . 952.967UK . . . . . 952.970UK . . . . . 952.973UK . . . . . 952.976UK . . . . . 952.979UK . . . . . 952.980UK . . . . . 952.992UK . . . . . 952.994UK . . . . . 952.997UK . . . . . 952.998UK . . . . . 953.019UK . . . . . 953.020UK . . . . . 953.022UK . . . . .

52 52 52 52 52 53 53 53 53 53 53 53 53 53 53 53 53 53 53 51 51 21 21 21 21 21 21 21 21 50 50 22 22 22 22 22 22 22 22 23 23 57 45 45 24 24 34 34 35 35 13 13 33 33 33 24 24 19 23 19 23 19 19 36 36 36 37 43 43 43 37 38 37 39 41 41

# 100V line amplifiers . . . . . . . . . . . . . . . . . 33-38, 41 100V line speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8, 12, 14-16, 19, 21-25, 29-31 100V line transformers . . . . . . . . . . . . . . . . . . . . 55 19” amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . 34-38 19” mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-40 19” rack accessories . . . . . . . . . . . . . . . . . . . . 51-54 19” rack mountable products . . . . . . . . . . . 34-45

A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-57 Accessories: 100V line transformers . . . . . . . . . . . . . . . 55 19” rack . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-54 Microphones . . . . . . . . . . . . . . . . . . . . . 55-57 Volume controls . . . . . . . . . . . . . . . . . . . . . 54 Active speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Amplifiers: 100V line . . . . . . . . . . . . . . . . . . . . . . 33-38, 41 19” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-38 Induction loop . . . . . . . . . . . . . . . . . . . . 44-45 Mixer . . . . . . . . . . . . . . . . . . . . . . 33-34, 36, 38 Slave . . . . . . . . . . . . . . . . . . . . . . . . . 33, 35, 37 Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Array brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Array speakers . . . . . . . . . . . . . . . . . . . . . . . . . 15-16

B Background speakers . . . . . . . . . . . . . . . . . . 16-24 Boundary microphones . . . . . . . . . . . . . . . . . . . 55 Brackets for speakers . . . . . . . . . . . . . . . . . . . 26-27 Brackets: Adjustable . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

C Ceiling speakers . . . . . . . . . . . . . . . . . . . . . 3-11, 14 Column speakers . . . . . . . . . . . . . . . . . . . . . . . . . 25 Compact ceiling speakers . . . . . . . . . . . . . . . . . . 8 Corner mount speakers . . . . . . . . . . . . . . . . 15-16

D Data cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

E Equipment racks . . . . . . . . . . . . . . . . . . . . . . . . . . 52

F Fire domes for speakers . . . . . . . . . . . . . . . . . . . . 6

H Horn speakers . . . . . . . . . . . . . . . . . . . . . . . . . 28-31 Horns: Car roof mount . . . . . . . . . . . . . . . . . . . . . . 28 Rectangular . . . . . . . . . . . . . . . . . . . . . . 29-30 Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-31

I Induction loop amplifier . . . . . . . . . . . . . . . . . . 45 Induction loop receiver . . . . . . . . . . . . . . . . . . . 45 Induction loop system . . . . . . . . . . . . . . . . . 44-45 In-wall speakers . . . . . . . . . . . . . . . . . . . . . . . . 13-14 IP rated speakers . . . 9-11, 17-19, 22, 24-25, 28-31

L Line splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Loudspeakers . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31 Low impedance speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7, 9-18, 20-22, 24-25, 28-30

M Megaphones . . . . . . . . . . . . . . . . . . . . . . . . . . 49-50 Microphones . . . . . . . . . . . . . . . . . . . 47-48, 55-57 Microphones: Boundary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57 Mixer amplifiers . . . . . . . . . . . . . . . . . 33-34, 36, 38 Mixers: 19” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-40 Zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-41 Mounts for speakers . . . . . . . . . . . . . . . . . . . 26-27

N Noise pollution remote indicator . . . . . . . . . . 50 Noise pollution system . . . . . . . . . . . . . . . . . . . . 50

O Outdoor speakers . . . . . . . . . . . . 17, 19, 22, 24-25 Oval ceiling speakers . . . . . . . . . . . . . . . . . . . . . . . 9

P PA systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-48 Paging microphones . . . . . . . . . . . . . . . . . . . 56-57 Pendant speakers . . . . . . . . . . . . . . . . . . . . . . . . . 12 Portable PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-50

Q Quick-fit ceiling speakers . . . . . . . . . . . . . . . . . 6, 8

R Rectangular horn speakers . . . . . . . . . . . . . 29-30 Remote indicator . . . . . . . . . . . . . . . . . . . . . . . . . 50 Round ceiling speakers . . . . . . . . . . . . . . . . . . . 3-8 Round horn speakers . . . . . . . . . . . . . . . . . . 28-31

S Slave amplifiers . . . . . . . . . . . . . . . . . . . . 33, 35, 37 Slimline ceiling speakers . . . . . . . . . . . . . . . . . . . 3 Slimline speakers . . . . . . . . . . . . . . . . . . . . . . . 3, 14 Sound sources . . . . . . . . . . . . . . . . . . . . . . . . . 42-43 Speaker fire domes . . . . . . . . . . . . . . . . . . . . . . . . . 6 Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31 Speakers: 100V line . . 6-8, 12, 14-16, 19, 21-25, 29-31 Active . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16 Background . . . . . . . . . . . . . . . . . . . . . . 16-24 Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11, 14 Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Compact ceiling . . . . . . . . . . . . . . . . . . . . . . 8 Corner mount . . . . . . . . . . . . . . . . . . . . 15-16 Horns . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-31 In-wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 IP rated . . . . . 9-11, 17-19, 22, 24-25, 28-31 Low impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7, 9-18, 20-22, 24-25, 28-30 Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 Outdoor . . . . . . . . . . . . . . . . 17, 19, 22, 24-25 Oval ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Quick-fit ceiling . . . . . . . . . . . . . . . . . . . . . 6, 8 Round ceiling . . . . . . . . . . . . . . . . . . . . . . . 3-8 Slimline . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 14 Slimline Ceiling . . . . . . . . . . . . . . . . . . . . . . . 3 Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 Surface mount . . . . . . . . . . . . . . . . . . . . . . . 14 Wall mount . . . . . . . . . . . . . . . . . . . . . . . 15-16 Water resistant . . . . . . . . . . . . . . . . . . . . . 9-11 Stereo speakers . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 Surface mount speakers . . . . . . . . . . . . . . . . . . . 14

V Vehicle amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Volume controls . . . . . . . . . . . . . . . . . . . . . . . . . . 54

W Wall mount speakers . . . . . . . . . . . . . . . . . . . 15-16 Water resistant speakers . . . . . . . . . . . . . . . . . 9-11

Z Zoning amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . 42 Zoning mixers . . . . . . . . . . . . . . . . . . . . . . . . . 39-41

www.surplustronics.co.nz

Surplustronics Trading Ltd T 09-837 5020 F 09-837 5019 E sales@surplustronics.co.nz

www.surplustronics.co.nz

All information is correct at time of going to press, we reserve the right to alter product specifications at any time and for any reason without liability. Product illustrations and effects may be simulated. Errors and omissions excepted. CopyrightÂŠ 2014 Surplustronics Ltd. Version ADA010113 (v2)